From fcec34565827f2edb29d124498aa8f561455f15d Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 12 May 2005 19:28:49 -0400 Subject: [netdrvr 8139cp] TSO support --- drivers/net/8139cp.c | 50 +++++++++++++++++++++++++++++++++----------------- 1 file changed, 33 insertions(+), 17 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c index d639cb8dc46..a7573dd92f2 100644 --- a/drivers/net/8139cp.c +++ b/drivers/net/8139cp.c @@ -186,6 +186,9 @@ enum { RingEnd = (1 << 30), /* End of descriptor ring */ FirstFrag = (1 << 29), /* First segment of a packet */ LastFrag = (1 << 28), /* Final segment of a packet */ + LargeSend = (1 << 27), /* TCP Large Send Offload (TSO) */ + MSSShift = 16, /* MSS value position */ + MSSMask = 0xfff, /* MSS value: 11 bits */ TxError = (1 << 23), /* Tx error summary */ RxError = (1 << 20), /* Rx error summary */ IPCS = (1 << 18), /* Calculate IP checksum */ @@ -749,10 +752,11 @@ static int cp_start_xmit (struct sk_buff *skb, struct net_device *dev) { struct cp_private *cp = netdev_priv(dev); unsigned entry; - u32 eor; + u32 eor, flags; #if CP_VLAN_TAG_USED u32 vlan_tag = 0; #endif + int mss = 0; spin_lock_irq(&cp->lock); @@ -772,6 +776,9 @@ static int cp_start_xmit (struct sk_buff *skb, struct net_device *dev) entry = cp->tx_head; eor = (entry == (CP_TX_RING_SIZE - 1)) ? RingEnd : 0; + if (dev->features & NETIF_F_TSO) + mss = skb_shinfo(skb)->tso_size; + if (skb_shinfo(skb)->nr_frags == 0) { struct cp_desc *txd = &cp->tx_ring[entry]; u32 len; @@ -783,21 +790,21 @@ static int cp_start_xmit (struct sk_buff *skb, struct net_device *dev) txd->addr = cpu_to_le64(mapping); wmb(); - if (skb->ip_summed == CHECKSUM_HW) { + flags = eor | len | DescOwn | FirstFrag | LastFrag; + + if (mss) + flags |= LargeSend | ((mss & MSSMask) << MSSShift); + else if (skb->ip_summed == CHECKSUM_HW) { const struct iphdr *ip = skb->nh.iph; if (ip->protocol == IPPROTO_TCP) - txd->opts1 = cpu_to_le32(eor | len | DescOwn | - FirstFrag | LastFrag | - IPCS | TCPCS); + flags |= IPCS | TCPCS; else if (ip->protocol == IPPROTO_UDP) - txd->opts1 = cpu_to_le32(eor | len | DescOwn | - FirstFrag | LastFrag | - IPCS | UDPCS); + flags |= IPCS | UDPCS; else BUG(); - } else - txd->opts1 = cpu_to_le32(eor | len | DescOwn | - FirstFrag | LastFrag); + } + + txd->opts1 = cpu_to_le32(flags); wmb(); cp->tx_skb[entry].skb = skb; @@ -836,16 +843,19 @@ static int cp_start_xmit (struct sk_buff *skb, struct net_device *dev) len, PCI_DMA_TODEVICE); eor = (entry == (CP_TX_RING_SIZE - 1)) ? RingEnd : 0; - if (skb->ip_summed == CHECKSUM_HW) { - ctrl = eor | len | DescOwn | IPCS; + ctrl = eor | len | DescOwn; + + if (mss) + ctrl |= LargeSend | + ((mss & MSSMask) << MSSShift); + else if (skb->ip_summed == CHECKSUM_HW) { if (ip->protocol == IPPROTO_TCP) - ctrl |= TCPCS; + ctrl |= IPCS | TCPCS; else if (ip->protocol == IPPROTO_UDP) - ctrl |= UDPCS; + ctrl |= IPCS | UDPCS; else BUG(); - } else - ctrl = eor | len | DescOwn; + } if (frag == skb_shinfo(skb)->nr_frags - 1) ctrl |= LastFrag; @@ -1538,6 +1548,8 @@ static struct ethtool_ops cp_ethtool_ops = { .set_tx_csum = ethtool_op_set_tx_csum, /* local! */ .get_sg = ethtool_op_get_sg, .set_sg = ethtool_op_set_sg, + .get_tso = ethtool_op_get_tso, + .set_tso = ethtool_op_set_tso, .get_regs = cp_get_regs, .get_wol = cp_get_wol, .set_wol = cp_set_wol, @@ -1768,6 +1780,10 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (pci_using_dac) dev->features |= NETIF_F_HIGHDMA; +#if 0 /* disabled by default until verified */ + dev->features |= NETIF_F_TSO; +#endif + dev->irq = pdev->irq; rc = register_netdev(dev); -- cgit v1.2.3 From 5734418d4f3420352eae38c8fcec699bf09874c1 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Thu, 12 May 2005 19:31:31 -0400 Subject: [PATCH] 8139cp: SG support fixes - suspicious length in pci_unmap_single; - wait for the last frag before freeing the relevant skb; - no need to crash when facing some unexpected csum combination. --- drivers/net/8139cp.c | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c index a7573dd92f2..212eb90dfcc 100644 --- a/drivers/net/8139cp.c +++ b/drivers/net/8139cp.c @@ -315,7 +315,7 @@ struct cp_desc { struct ring_info { struct sk_buff *skb; dma_addr_t mapping; - unsigned frag; + u32 len; }; struct cp_dma_stats { @@ -710,7 +710,7 @@ static void cp_tx (struct cp_private *cp) BUG(); pci_unmap_single(cp->pdev, cp->tx_skb[tx_tail].mapping, - skb->len, PCI_DMA_TODEVICE); + cp->tx_skb[tx_tail].len, PCI_DMA_TODEVICE); if (status & LastFrag) { if (status & (TxError | TxFIFOUnder)) { @@ -801,7 +801,7 @@ static int cp_start_xmit (struct sk_buff *skb, struct net_device *dev) else if (ip->protocol == IPPROTO_UDP) flags |= IPCS | UDPCS; else - BUG(); + WARN_ON(1); /* we need a WARN() */ } txd->opts1 = cpu_to_le32(flags); @@ -809,7 +809,7 @@ static int cp_start_xmit (struct sk_buff *skb, struct net_device *dev) cp->tx_skb[entry].skb = skb; cp->tx_skb[entry].mapping = mapping; - cp->tx_skb[entry].frag = 0; + cp->tx_skb[entry].len = len; entry = NEXT_TX(entry); } else { struct cp_desc *txd; @@ -827,7 +827,7 @@ static int cp_start_xmit (struct sk_buff *skb, struct net_device *dev) first_len, PCI_DMA_TODEVICE); cp->tx_skb[entry].skb = skb; cp->tx_skb[entry].mapping = first_mapping; - cp->tx_skb[entry].frag = 1; + cp->tx_skb[entry].len = first_len; entry = NEXT_TX(entry); for (frag = 0; frag < skb_shinfo(skb)->nr_frags; frag++) { @@ -870,7 +870,7 @@ static int cp_start_xmit (struct sk_buff *skb, struct net_device *dev) cp->tx_skb[entry].skb = skb; cp->tx_skb[entry].mapping = mapping; - cp->tx_skb[entry].frag = frag + 2; + cp->tx_skb[entry].len = len; entry = NEXT_TX(entry); } @@ -1084,7 +1084,6 @@ static int cp_refill_rx (struct cp_private *cp) cp->rx_skb[i].mapping = pci_map_single(cp->pdev, skb->tail, cp->rx_buf_sz, PCI_DMA_FROMDEVICE); cp->rx_skb[i].skb = skb; - cp->rx_skb[i].frag = 0; cp->rx_ring[i].opts2 = 0; cp->rx_ring[i].addr = cpu_to_le64(cp->rx_skb[i].mapping); @@ -1136,9 +1135,6 @@ static void cp_clean_rings (struct cp_private *cp) { unsigned i; - memset(cp->rx_ring, 0, sizeof(struct cp_desc) * CP_RX_RING_SIZE); - memset(cp->tx_ring, 0, sizeof(struct cp_desc) * CP_TX_RING_SIZE); - for (i = 0; i < CP_RX_RING_SIZE; i++) { if (cp->rx_skb[i].skb) { pci_unmap_single(cp->pdev, cp->rx_skb[i].mapping, @@ -1150,13 +1146,18 @@ static void cp_clean_rings (struct cp_private *cp) for (i = 0; i < CP_TX_RING_SIZE; i++) { if (cp->tx_skb[i].skb) { struct sk_buff *skb = cp->tx_skb[i].skb; + pci_unmap_single(cp->pdev, cp->tx_skb[i].mapping, - skb->len, PCI_DMA_TODEVICE); - dev_kfree_skb(skb); + cp->tx_skb[i].len, PCI_DMA_TODEVICE); + if (le32_to_cpu(cp->tx_ring[i].opts1) & LastFrag) + dev_kfree_skb(skb); cp->net_stats.tx_dropped++; } } + memset(cp->rx_ring, 0, sizeof(struct cp_desc) * CP_RX_RING_SIZE); + memset(cp->tx_ring, 0, sizeof(struct cp_desc) * CP_TX_RING_SIZE); + memset(&cp->rx_skb, 0, sizeof(struct ring_info) * CP_RX_RING_SIZE); memset(&cp->tx_skb, 0, sizeof(struct ring_info) * CP_TX_RING_SIZE); } -- cgit v1.2.3 From e21ba28262037f5fe7ca8746502c7c03c3da817f Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Thu, 12 May 2005 19:33:26 -0400 Subject: [PATCH] 8139cp - module_param Not sure if I sent this already... Convert 8139cp to use new module_param() not old MODULE_PARM Signed-off-by: Stephen Hemminger --- drivers/net/8139cp.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c index 212eb90dfcc..18946a56d9b 100644 --- a/drivers/net/8139cp.c +++ b/drivers/net/8139cp.c @@ -54,6 +54,7 @@ #include #include +#include #include #include #include @@ -94,13 +95,13 @@ MODULE_DESCRIPTION("RealTek RTL-8139C+ series 10/100 PCI Ethernet driver"); MODULE_LICENSE("GPL"); static int debug = -1; -MODULE_PARM (debug, "i"); +module_param(debug, int, 0); MODULE_PARM_DESC (debug, "8139cp: bitmapped message enable number"); /* Maximum number of multicast addresses to filter (vs. Rx-all-multicast). The RTL chips use a 64 element hash table based on the Ethernet CRC. */ static int multicast_filter_limit = 32; -MODULE_PARM (multicast_filter_limit, "i"); +module_param(multicast_filter_limit, int, 0); MODULE_PARM_DESC (multicast_filter_limit, "8139cp: maximum number of filtered multicast addresses"); #define PFX DRV_NAME ": " -- cgit v1.2.3 From 7502cd1058152791fec94f32b719fec45e7f5de2 Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Thu, 12 May 2005 19:34:31 -0400 Subject: [PATCH] 8139cp - add netpoll support Patch adds netpoll support to the 8139cp driver. The patch needs some tests because I have no NIC of this type for testing. Applies against linux-2.6.9-rc2-mm3 Signed-off-by: Steffen Klassert --- drivers/net/8139cp.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c index 18946a56d9b..050d7602bbe 100644 --- a/drivers/net/8139cp.c +++ b/drivers/net/8139cp.c @@ -398,6 +398,9 @@ struct cp_private { static void __cp_set_rx_mode (struct net_device *dev); static void cp_tx (struct cp_private *cp); static void cp_clean_rings (struct cp_private *cp); +#ifdef CONFIG_NET_POLL_CONTROLLER +static void cp_poll_controller(struct net_device *dev); +#endif static struct pci_device_id cp_pci_tbl[] = { { PCI_VENDOR_ID_REALTEK, PCI_DEVICE_ID_REALTEK_8139, @@ -692,6 +695,19 @@ cp_interrupt (int irq, void *dev_instance, struct pt_regs *regs) return IRQ_HANDLED; } +#ifdef CONFIG_NET_POLL_CONTROLLER +/* + * Polling receive - used by netconsole and other diagnostic tools + * to allow network i/o with interrupts disabled. + */ +static void cp_poll_controller(struct net_device *dev) +{ + disable_irq(dev->irq); + cp_interrupt(dev->irq, dev, NULL); + enable_irq(dev->irq); +} +#endif + static void cp_tx (struct cp_private *cp) { unsigned tx_head = cp->tx_head; @@ -1763,6 +1779,9 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) dev->get_stats = cp_get_stats; dev->do_ioctl = cp_ioctl; dev->poll = cp_rx_poll; +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = cp_poll_controller; +#endif dev->weight = 16; /* arbitrary? from NAPI_HOWTO.txt. */ #ifdef BROKEN dev->change_mtu = cp_change_mtu; -- cgit v1.2.3 From a78d8927966dcc41bba52da3a10935072a592417 Mon Sep 17 00:00:00 2001 From: Date: Thu, 12 May 2005 19:35:42 -0400 Subject: [PATCH] 8139cp net driver: add MODULE_VERSION --- drivers/net/8139cp.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c index 050d7602bbe..72cdf19e1be 100644 --- a/drivers/net/8139cp.c +++ b/drivers/net/8139cp.c @@ -92,6 +92,7 @@ KERN_INFO DRV_NAME ": 10/100 PCI Ethernet driver v" DRV_VERSION " (" DRV_RELDATE MODULE_AUTHOR("Jeff Garzik "); MODULE_DESCRIPTION("RealTek RTL-8139C+ series 10/100 PCI Ethernet driver"); +MODULE_VERSION(DRV_VERSION); MODULE_LICENSE("GPL"); static int debug = -1; -- cgit v1.2.3 From 22f714b64b55012fa4e0d77132fa82719180f994 Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Thu, 12 May 2005 19:38:47 -0400 Subject: [PATCH] 8139too: use iomap for pio/mmio This patch converts the 8139too driver to use the iomap infrastructure for PIO and MMIO instead of playing macro tricks. I also had to fix read_eeprom(), mdio_sync(), mdio_read(), and mdio_write() to not pass PIO base address to MMIO read() and write() functions. In addition, the patch adds proper __iomem annotations for the driver. Both modes, PIO and MMIO, were tested with a RealTel RTL8139 card on an x86 box. The 8129 support remains untested due to lack of hardware. Signed-off-by: Pekka Enberg Signed-off-by: Jeff Garzik --- drivers/net/8139too.c | 194 ++++++++++++++++++++++---------------------------- 1 file changed, 87 insertions(+), 107 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c index d4bd20c21a1..047202c4d9a 100644 --- a/drivers/net/8139too.c +++ b/drivers/net/8139too.c @@ -569,7 +569,7 @@ struct rtl_extra_stats { }; struct rtl8139_private { - void *mmio_addr; + void __iomem *mmio_addr; int drv_flags; struct pci_dev *pci_dev; u32 msg_enable; @@ -614,7 +614,7 @@ MODULE_PARM_DESC (multicast_filter_limit, "8139too maximum number of filtered mu MODULE_PARM_DESC (media, "8139too: Bits 4+9: force full duplex, bit 5: 100Mbps"); MODULE_PARM_DESC (full_duplex, "8139too: Force full duplex for board(s) (1)"); -static int read_eeprom (void *ioaddr, int location, int addr_len); +static int read_eeprom (void __iomem *ioaddr, int location, int addr_len); static int rtl8139_open (struct net_device *dev); static int mdio_read (struct net_device *dev, int phy_id, int location); static void mdio_write (struct net_device *dev, int phy_id, int location, @@ -638,46 +638,20 @@ static void __set_rx_mode (struct net_device *dev); static void rtl8139_hw_start (struct net_device *dev); static struct ethtool_ops rtl8139_ethtool_ops; -#ifdef USE_IO_OPS - -#define RTL_R8(reg) inb (((unsigned long)ioaddr) + (reg)) -#define RTL_R16(reg) inw (((unsigned long)ioaddr) + (reg)) -#define RTL_R32(reg) ((unsigned long) inl (((unsigned long)ioaddr) + (reg))) -#define RTL_W8(reg, val8) outb ((val8), ((unsigned long)ioaddr) + (reg)) -#define RTL_W16(reg, val16) outw ((val16), ((unsigned long)ioaddr) + (reg)) -#define RTL_W32(reg, val32) outl ((val32), ((unsigned long)ioaddr) + (reg)) -#define RTL_W8_F RTL_W8 -#define RTL_W16_F RTL_W16 -#define RTL_W32_F RTL_W32 -#undef readb -#undef readw -#undef readl -#undef writeb -#undef writew -#undef writel -#define readb(addr) inb((unsigned long)(addr)) -#define readw(addr) inw((unsigned long)(addr)) -#define readl(addr) inl((unsigned long)(addr)) -#define writeb(val,addr) outb((val),(unsigned long)(addr)) -#define writew(val,addr) outw((val),(unsigned long)(addr)) -#define writel(val,addr) outl((val),(unsigned long)(addr)) - -#else - /* write MMIO register, with flush */ /* Flush avoids rtl8139 bug w/ posted MMIO writes */ -#define RTL_W8_F(reg, val8) do { writeb ((val8), ioaddr + (reg)); readb (ioaddr + (reg)); } while (0) -#define RTL_W16_F(reg, val16) do { writew ((val16), ioaddr + (reg)); readw (ioaddr + (reg)); } while (0) -#define RTL_W32_F(reg, val32) do { writel ((val32), ioaddr + (reg)); readl (ioaddr + (reg)); } while (0) +#define RTL_W8_F(reg, val8) do { iowrite8 ((val8), ioaddr + (reg)); ioread8 (ioaddr + (reg)); } while (0) +#define RTL_W16_F(reg, val16) do { iowrite16 ((val16), ioaddr + (reg)); ioread16 (ioaddr + (reg)); } while (0) +#define RTL_W32_F(reg, val32) do { iowrite32 ((val32), ioaddr + (reg)); ioread32 (ioaddr + (reg)); } while (0) #define MMIO_FLUSH_AUDIT_COMPLETE 1 #if MMIO_FLUSH_AUDIT_COMPLETE /* write MMIO register */ -#define RTL_W8(reg, val8) writeb ((val8), ioaddr + (reg)) -#define RTL_W16(reg, val16) writew ((val16), ioaddr + (reg)) -#define RTL_W32(reg, val32) writel ((val32), ioaddr + (reg)) +#define RTL_W8(reg, val8) iowrite8 ((val8), ioaddr + (reg)) +#define RTL_W16(reg, val16) iowrite16 ((val16), ioaddr + (reg)) +#define RTL_W32(reg, val32) iowrite32 ((val32), ioaddr + (reg)) #else @@ -689,11 +663,9 @@ static struct ethtool_ops rtl8139_ethtool_ops; #endif /* MMIO_FLUSH_AUDIT_COMPLETE */ /* read MMIO register */ -#define RTL_R8(reg) readb (ioaddr + (reg)) -#define RTL_R16(reg) readw (ioaddr + (reg)) -#define RTL_R32(reg) ((unsigned long) readl (ioaddr + (reg))) - -#endif /* USE_IO_OPS */ +#define RTL_R8(reg) ioread8 (ioaddr + (reg)) +#define RTL_R16(reg) ioread16 (ioaddr + (reg)) +#define RTL_R32(reg) ((unsigned long) ioread32 (ioaddr + (reg))) static const u16 rtl8139_intr_mask = @@ -740,10 +712,13 @@ static void __rtl8139_cleanup_dev (struct net_device *dev) assert (tp->pci_dev != NULL); pdev = tp->pci_dev; -#ifndef USE_IO_OPS +#ifdef USE_IO_OPS + if (tp->mmio_addr) + ioport_unmap (tp->mmio_addr); +#else if (tp->mmio_addr) - iounmap (tp->mmio_addr); -#endif /* !USE_IO_OPS */ + pci_iounmap (pdev, tp->mmio_addr); +#endif /* USE_IO_OPS */ /* it's ok to call this even if we have no regions to free */ pci_release_regions (pdev); @@ -753,7 +728,7 @@ static void __rtl8139_cleanup_dev (struct net_device *dev) } -static void rtl8139_chip_reset (void *ioaddr) +static void rtl8139_chip_reset (void __iomem *ioaddr) { int i; @@ -773,7 +748,7 @@ static void rtl8139_chip_reset (void *ioaddr) static int __devinit rtl8139_init_board (struct pci_dev *pdev, struct net_device **dev_out) { - void *ioaddr; + void __iomem *ioaddr; struct net_device *dev; struct rtl8139_private *tp; u8 tmp8; @@ -855,13 +830,18 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev, pci_set_master (pdev); #ifdef USE_IO_OPS - ioaddr = (void *) pio_start; + ioaddr = ioport_map(pio_start, pio_len); + if (!ioaddr) { + printk (KERN_ERR PFX "%s: cannot map PIO, aborting\n", pci_name(pdev)); + rc = -EIO; + goto err_out; + } dev->base_addr = pio_start; tp->mmio_addr = ioaddr; tp->regs_len = pio_len; #else /* ioremap MMIO region */ - ioaddr = ioremap (mmio_start, mmio_len); + ioaddr = pci_iomap(pdev, 1, 0); if (ioaddr == NULL) { printk (KERN_ERR PFX "%s: cannot remap MMIO, aborting\n", pci_name(pdev)); rc = -EIO; @@ -947,7 +927,7 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev, struct net_device *dev = NULL; struct rtl8139_private *tp; int i, addr_len, option; - void *ioaddr; + void __iomem *ioaddr; static int board_idx = -1; u8 pci_rev; @@ -1147,47 +1127,46 @@ static void __devexit rtl8139_remove_one (struct pci_dev *pdev) No extra delay is needed with 33Mhz PCI, but 66Mhz may change this. */ -#define eeprom_delay() readl(ee_addr) +#define eeprom_delay() RTL_R32(Cfg9346) /* The EEPROM commands include the alway-set leading bit. */ #define EE_WRITE_CMD (5) #define EE_READ_CMD (6) #define EE_ERASE_CMD (7) -static int __devinit read_eeprom (void *ioaddr, int location, int addr_len) +static int __devinit read_eeprom (void __iomem *ioaddr, int location, int addr_len) { int i; unsigned retval = 0; - void *ee_addr = ioaddr + Cfg9346; int read_cmd = location | (EE_READ_CMD << addr_len); - writeb (EE_ENB & ~EE_CS, ee_addr); - writeb (EE_ENB, ee_addr); + RTL_W8 (Cfg9346, EE_ENB & ~EE_CS); + RTL_W8 (Cfg9346, EE_ENB); eeprom_delay (); /* Shift the read command bits out. */ for (i = 4 + addr_len; i >= 0; i--) { int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0; - writeb (EE_ENB | dataval, ee_addr); + RTL_W8 (Cfg9346, EE_ENB | dataval); eeprom_delay (); - writeb (EE_ENB | dataval | EE_SHIFT_CLK, ee_addr); + RTL_W8 (Cfg9346, EE_ENB | dataval | EE_SHIFT_CLK); eeprom_delay (); } - writeb (EE_ENB, ee_addr); + RTL_W8 (Cfg9346, EE_ENB); eeprom_delay (); for (i = 16; i > 0; i--) { - writeb (EE_ENB | EE_SHIFT_CLK, ee_addr); + RTL_W8 (Cfg9346, EE_ENB | EE_SHIFT_CLK); eeprom_delay (); retval = - (retval << 1) | ((readb (ee_addr) & EE_DATA_READ) ? 1 : + (retval << 1) | ((RTL_R8 (Cfg9346) & EE_DATA_READ) ? 1 : 0); - writeb (EE_ENB, ee_addr); + RTL_W8 (Cfg9346, EE_ENB); eeprom_delay (); } /* Terminate the EEPROM access. */ - writeb (~EE_CS, ee_addr); + RTL_W8 (Cfg9346, ~EE_CS); eeprom_delay (); return retval; @@ -1206,7 +1185,7 @@ static int __devinit read_eeprom (void *ioaddr, int location, int addr_len) #define MDIO_WRITE0 (MDIO_DIR) #define MDIO_WRITE1 (MDIO_DIR | MDIO_DATA_OUT) -#define mdio_delay(mdio_addr) readb(mdio_addr) +#define mdio_delay() RTL_R8(Config4) static char mii_2_8139_map[8] = { @@ -1223,15 +1202,15 @@ static char mii_2_8139_map[8] = { #ifdef CONFIG_8139TOO_8129 /* Syncronize the MII management interface by shifting 32 one bits out. */ -static void mdio_sync (void *mdio_addr) +static void mdio_sync (void __iomem *ioaddr) { int i; for (i = 32; i >= 0; i--) { - writeb (MDIO_WRITE1, mdio_addr); - mdio_delay (mdio_addr); - writeb (MDIO_WRITE1 | MDIO_CLK, mdio_addr); - mdio_delay (mdio_addr); + RTL_W8 (Config4, MDIO_WRITE1); + mdio_delay (); + RTL_W8 (Config4, MDIO_WRITE1 | MDIO_CLK); + mdio_delay (); } } #endif @@ -1241,35 +1220,36 @@ static int mdio_read (struct net_device *dev, int phy_id, int location) struct rtl8139_private *tp = netdev_priv(dev); int retval = 0; #ifdef CONFIG_8139TOO_8129 - void *mdio_addr = tp->mmio_addr + Config4; + void __iomem *ioaddr = tp->mmio_addr; int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location; int i; #endif if (phy_id > 31) { /* Really a 8139. Use internal registers. */ + void __iomem *ioaddr = tp->mmio_addr; return location < 8 && mii_2_8139_map[location] ? - readw (tp->mmio_addr + mii_2_8139_map[location]) : 0; + RTL_R16 (mii_2_8139_map[location]) : 0; } #ifdef CONFIG_8139TOO_8129 - mdio_sync (mdio_addr); + mdio_sync (ioaddr); /* Shift the read command bits out. */ for (i = 15; i >= 0; i--) { int dataval = (mii_cmd & (1 << i)) ? MDIO_DATA_OUT : 0; - writeb (MDIO_DIR | dataval, mdio_addr); - mdio_delay (mdio_addr); - writeb (MDIO_DIR | dataval | MDIO_CLK, mdio_addr); - mdio_delay (mdio_addr); + RTL_W8 (Config4, MDIO_DIR | dataval); + mdio_delay (); + RTL_W8 (Config4, MDIO_DIR | dataval | MDIO_CLK); + mdio_delay (); } /* Read the two transition, 16 data, and wire-idle bits. */ for (i = 19; i > 0; i--) { - writeb (0, mdio_addr); - mdio_delay (mdio_addr); - retval = (retval << 1) | ((readb (mdio_addr) & MDIO_DATA_IN) ? 1 : 0); - writeb (MDIO_CLK, mdio_addr); - mdio_delay (mdio_addr); + RTL_W8 (Config4, 0); + mdio_delay (); + retval = (retval << 1) | ((RTL_R8 (Config4) & MDIO_DATA_IN) ? 1 : 0); + RTL_W8 (Config4, MDIO_CLK); + mdio_delay (); } #endif @@ -1282,13 +1262,13 @@ static void mdio_write (struct net_device *dev, int phy_id, int location, { struct rtl8139_private *tp = netdev_priv(dev); #ifdef CONFIG_8139TOO_8129 - void *mdio_addr = tp->mmio_addr + Config4; + void __iomem *ioaddr = tp->mmio_addr; int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location << 18) | value; int i; #endif if (phy_id > 31) { /* Really a 8139. Use internal registers. */ - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; if (location == 0) { RTL_W8 (Cfg9346, Cfg9346_Unlock); RTL_W16 (BasicModeCtrl, value); @@ -1299,23 +1279,23 @@ static void mdio_write (struct net_device *dev, int phy_id, int location, } #ifdef CONFIG_8139TOO_8129 - mdio_sync (mdio_addr); + mdio_sync (ioaddr); /* Shift the command bits out. */ for (i = 31; i >= 0; i--) { int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0; - writeb (dataval, mdio_addr); - mdio_delay (mdio_addr); - writeb (dataval | MDIO_CLK, mdio_addr); - mdio_delay (mdio_addr); + RTL_W8 (Config4, dataval); + mdio_delay (); + RTL_W8 (Config4, dataval | MDIO_CLK); + mdio_delay (); } /* Clear out extra bits. */ for (i = 2; i > 0; i--) { - writeb (0, mdio_addr); - mdio_delay (mdio_addr); - writeb (MDIO_CLK, mdio_addr); - mdio_delay (mdio_addr); + RTL_W8 (Config4, 0); + mdio_delay (); + RTL_W8 (Config4, MDIO_CLK); + mdio_delay (); } #endif } @@ -1325,7 +1305,7 @@ static int rtl8139_open (struct net_device *dev) { struct rtl8139_private *tp = netdev_priv(dev); int retval; - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; retval = request_irq (dev->irq, rtl8139_interrupt, SA_SHIRQ, dev->name, dev); if (retval) @@ -1382,7 +1362,7 @@ static void rtl_check_media (struct net_device *dev, unsigned int init_media) static void rtl8139_hw_start (struct net_device *dev) { struct rtl8139_private *tp = netdev_priv(dev); - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; u32 i; u8 tmp; @@ -1484,7 +1464,7 @@ static void rtl8139_tune_twister (struct net_device *dev, struct rtl8139_private *tp) { int linkcase; - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; /* This is a complicated state machine to configure the "twister" for impedance/echos based on the cable length. @@ -1568,7 +1548,7 @@ static void rtl8139_tune_twister (struct net_device *dev, static inline void rtl8139_thread_iter (struct net_device *dev, struct rtl8139_private *tp, - void *ioaddr) + void __iomem *ioaddr) { int mii_lpa; @@ -1676,7 +1656,7 @@ static inline void rtl8139_tx_clear (struct rtl8139_private *tp) static void rtl8139_tx_timeout (struct net_device *dev) { struct rtl8139_private *tp = netdev_priv(dev); - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; int i; u8 tmp8; unsigned long flags; @@ -1721,7 +1701,7 @@ static void rtl8139_tx_timeout (struct net_device *dev) static int rtl8139_start_xmit (struct sk_buff *skb, struct net_device *dev) { struct rtl8139_private *tp = netdev_priv(dev); - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; unsigned int entry; unsigned int len = skb->len; @@ -1763,7 +1743,7 @@ static int rtl8139_start_xmit (struct sk_buff *skb, struct net_device *dev) static void rtl8139_tx_interrupt (struct net_device *dev, struct rtl8139_private *tp, - void *ioaddr) + void __iomem *ioaddr) { unsigned long dirty_tx, tx_left; @@ -1833,7 +1813,7 @@ static void rtl8139_tx_interrupt (struct net_device *dev, /* TODO: clean this up! Rx reset need not be this intensive */ static void rtl8139_rx_err (u32 rx_status, struct net_device *dev, - struct rtl8139_private *tp, void *ioaddr) + struct rtl8139_private *tp, void __iomem *ioaddr) { u8 tmp8; #ifdef CONFIG_8139_OLD_RX_RESET @@ -1930,7 +1910,7 @@ static __inline__ void wrap_copy(struct sk_buff *skb, const unsigned char *ring, static void rtl8139_isr_ack(struct rtl8139_private *tp) { - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; u16 status; status = RTL_R16 (IntrStatus) & RxAckBits; @@ -1949,7 +1929,7 @@ static void rtl8139_isr_ack(struct rtl8139_private *tp) static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp, int budget) { - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; int received = 0; unsigned char *rx_ring = tp->rx_ring; unsigned int cur_rx = tp->cur_rx; @@ -2087,7 +2067,7 @@ out: static void rtl8139_weird_interrupt (struct net_device *dev, struct rtl8139_private *tp, - void *ioaddr, + void __iomem *ioaddr, int status, int link_changed) { DPRINTK ("%s: Abnormal interrupt, status %8.8x.\n", @@ -2127,7 +2107,7 @@ static void rtl8139_weird_interrupt (struct net_device *dev, static int rtl8139_poll(struct net_device *dev, int *budget) { struct rtl8139_private *tp = netdev_priv(dev); - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; int orig_budget = min(*budget, dev->quota); int done = 1; @@ -2165,7 +2145,7 @@ static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance, { struct net_device *dev = (struct net_device *) dev_instance; struct rtl8139_private *tp = netdev_priv(dev); - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; u16 status, ackstat; int link_changed = 0; /* avoid bogus "uninit" warning */ int handled = 0; @@ -2241,7 +2221,7 @@ static void rtl8139_poll_controller(struct net_device *dev) static int rtl8139_close (struct net_device *dev) { struct rtl8139_private *tp = netdev_priv(dev); - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; int ret = 0; unsigned long flags; @@ -2304,7 +2284,7 @@ static int rtl8139_close (struct net_device *dev) static void rtl8139_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) { struct rtl8139_private *np = netdev_priv(dev); - void *ioaddr = np->mmio_addr; + void __iomem *ioaddr = np->mmio_addr; spin_lock_irq(&np->lock); if (rtl_chip_info[np->chipset].flags & HasLWake) { @@ -2338,7 +2318,7 @@ static void rtl8139_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) static int rtl8139_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) { struct rtl8139_private *np = netdev_priv(dev); - void *ioaddr = np->mmio_addr; + void __iomem *ioaddr = np->mmio_addr; u32 support; u8 cfg3, cfg5; @@ -2506,7 +2486,7 @@ static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) static struct net_device_stats *rtl8139_get_stats (struct net_device *dev) { struct rtl8139_private *tp = netdev_priv(dev); - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; unsigned long flags; if (netif_running(dev)) { @@ -2525,7 +2505,7 @@ static struct net_device_stats *rtl8139_get_stats (struct net_device *dev) static void __set_rx_mode (struct net_device *dev) { struct rtl8139_private *tp = netdev_priv(dev); - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; u32 mc_filter[2]; /* Multicast hash filter */ int i, rx_mode; u32 tmp; @@ -2586,7 +2566,7 @@ static int rtl8139_suspend (struct pci_dev *pdev, pm_message_t state) { struct net_device *dev = pci_get_drvdata (pdev); struct rtl8139_private *tp = netdev_priv(dev); - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; unsigned long flags; pci_save_state (pdev); -- cgit v1.2.3 From dfa1b73ffb414b64dc0452260132a090eb25bf52 Mon Sep 17 00:00:00 2001 From: Liu Tao Date: Thu, 12 May 2005 19:40:38 -0400 Subject: [PATCH] drivers/net/amd8111e.c: fix NAPI interrupt in poll This patch makes the netif_rx_complete() and rx_interrupt_enable atomic when exiting the poll() method, so to avoid interrupt in poll. It also fixes the rx interrupt check logic in interrupt handler. Signed-off-by: Liu Tao Signed-off-by: Jeff Garzik --- drivers/net/amd8111e.c | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c index f2e937abf7b..b7dd7260caf 100755 --- a/drivers/net/amd8111e.c +++ b/drivers/net/amd8111e.c @@ -738,6 +738,7 @@ static int amd8111e_rx_poll(struct net_device *dev, int * budget) short vtag; #endif int rx_pkt_limit = dev->quota; + unsigned long flags; do{ /* process receive packets until we use the quota*/ @@ -841,18 +842,19 @@ static int amd8111e_rx_poll(struct net_device *dev, int * budget) /* Receive descriptor is empty now */ dev->quota -= num_rx_pkt; *budget -= num_rx_pkt; + + spin_lock_irqsave(&lp->lock, flags); netif_rx_complete(dev); - /* enable receive interrupt */ writel(VAL0|RINTEN0, mmio + INTEN0); writel(VAL2 | RDMD0, mmio + CMD0); + spin_unlock_irqrestore(&lp->lock, flags); return 0; + rx_not_empty: /* Do not call a netif_rx_complete */ dev->quota -= num_rx_pkt; *budget -= num_rx_pkt; return 1; - - } #else @@ -1261,18 +1263,20 @@ static irqreturn_t amd8111e_interrupt(int irq, void *dev_id, struct pt_regs *reg struct net_device * dev = (struct net_device *) dev_id; struct amd8111e_priv *lp = netdev_priv(dev); void __iomem *mmio = lp->mmio; - unsigned int intr0; + unsigned int intr0, intren0; unsigned int handled = 1; - if(dev == NULL) + if(unlikely(dev == NULL)) return IRQ_NONE; - if (regs) spin_lock (&lp->lock); + spin_lock(&lp->lock); + /* disabling interrupt */ writel(INTREN, mmio + CMD0); /* Read interrupt status */ intr0 = readl(mmio + INT0); + intren0 = readl(mmio + INTEN0); /* Process all the INT event until INTR bit is clear. */ @@ -1293,11 +1297,11 @@ static irqreturn_t amd8111e_interrupt(int irq, void *dev_id, struct pt_regs *reg /* Schedule a polling routine */ __netif_rx_schedule(dev); } - else { + else if (intren0 & RINTEN0) { printk("************Driver bug! \ interrupt while in poll\n"); - /* Fix by disabling interrupts */ - writel(RINT0, mmio + INT0); + /* Fix by disable receive interrupts */ + writel(RINTEN0, mmio + INTEN0); } } #else @@ -1321,7 +1325,7 @@ static irqreturn_t amd8111e_interrupt(int irq, void *dev_id, struct pt_regs *reg err_no_interrupt: writel( VAL0 | INTREN,mmio + CMD0); - if (regs) spin_unlock(&lp->lock); + spin_unlock(&lp->lock); return IRQ_RETVAL(handled); } -- cgit v1.2.3 From 2918c35d311263bc313b3da272783860ce573189 Mon Sep 17 00:00:00 2001 From: Michal Schmidt Date: Thu, 12 May 2005 19:42:06 -0400 Subject: [PATCH] forcedeth: netpoll support --- drivers/net/forcedeth.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index cda48c5d72a..c93f3d08dc4 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -1480,6 +1480,13 @@ static void nv_do_nic_poll(unsigned long data) enable_irq(dev->irq); } +#ifdef CONFIG_NET_POLL_CONTROLLER +static void nv_poll_controller(struct net_device *dev) +{ + nv_do_nic_poll((unsigned long) dev); +} +#endif + static void nv_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { struct fe_priv *np = get_nvpriv(dev); @@ -1962,6 +1969,9 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i dev->get_stats = nv_get_stats; dev->change_mtu = nv_change_mtu; dev->set_multicast_list = nv_set_multicast; +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = nv_poll_controller; +#endif SET_ETHTOOL_OPS(dev, &ops); dev->tx_timeout = nv_tx_timeout; dev->watchdog_timeo = NV_WATCHDOG_TIMEO; -- cgit v1.2.3 From 7d17c1d606f6e89778f05554ddea43791d5c92a0 Mon Sep 17 00:00:00 2001 From: Date: Thu, 12 May 2005 19:45:25 -0400 Subject: [netdrvrs] Use netif_carrier_* instead of IFF_RUNNING --- drivers/net/au1000_eth.c | 10 ++-------- drivers/net/bmac.c | 2 -- drivers/net/sk98lin/skge.c | 8 +++----- drivers/net/tlan.c | 4 ++-- drivers/net/tokenring/ibmtr.c | 11 +++-------- drivers/net/wan/lmc/lmc_main.c | 8 ++------ 6 files changed, 12 insertions(+), 31 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c index 5a2efd343db..c82b9cd1c92 100644 --- a/drivers/net/au1000_eth.c +++ b/drivers/net/au1000_eth.c @@ -1681,10 +1681,6 @@ static int au1000_init(struct net_device *dev) control |= MAC_FULL_DUPLEX; } - /* fix for startup without cable */ - if (!link) - dev->flags &= ~IFF_RUNNING; - aup->mac->control = control; aup->mac->vlan1_tag = 0x8100; /* activate vlan support */ au_sync(); @@ -1709,16 +1705,14 @@ static void au1000_timer(unsigned long data) if_port = dev->if_port; if (aup->phy_ops->phy_status(dev, aup->phy_addr, &link, &speed) == 0) { if (link) { - if (!(dev->flags & IFF_RUNNING)) { + if (!netif_carrier_ok(dev)) { netif_carrier_on(dev); - dev->flags |= IFF_RUNNING; printk(KERN_INFO "%s: link up\n", dev->name); } } else { - if (dev->flags & IFF_RUNNING) { + if (netif_carrier_ok(dev)) { netif_carrier_off(dev); - dev->flags &= ~IFF_RUNNING; dev->if_port = 0; printk(KERN_INFO "%s: link down\n", dev->name); } diff --git a/drivers/net/bmac.c b/drivers/net/bmac.c index 734bd4ee3f9..00e5257b176 100644 --- a/drivers/net/bmac.c +++ b/drivers/net/bmac.c @@ -1412,7 +1412,6 @@ static int bmac_open(struct net_device *dev) bp->opened = 1; bmac_reset_and_enable(dev); enable_irq(dev->irq); - dev->flags |= IFF_RUNNING; return 0; } @@ -1425,7 +1424,6 @@ static int bmac_close(struct net_device *dev) int i; bp->sleeping = 1; - dev->flags &= ~(IFF_UP | IFF_RUNNING); /* disable rx and tx */ config = bmread(dev, RXCFG); diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c index 05b827f79f5..1ccb2989001 100644 --- a/drivers/net/sk98lin/skge.c +++ b/drivers/net/sk98lin/skge.c @@ -4212,7 +4212,7 @@ SK_BOOL DualNet; Flags); SkGeStopPort(pAC, IoC, FromPort, SK_STOP_ALL, SK_HARD_RST); - pAC->dev[Param.Para32[0]]->flags &= ~IFF_RUNNING; + netif_carrier_off(pAC->dev[Param.Para32[0]]); spin_unlock_irqrestore( &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock, Flags); @@ -4355,7 +4355,7 @@ SK_BOOL DualNet; } /* Inform the world that link protocol is up. */ - pAC->dev[Param.Para32[0]]->flags |= IFF_RUNNING; + netif_carrier_on(pAC->dev[Param.Para32[0]]); break; case SK_DRV_NET_DOWN: /* SK_U32 Reason */ @@ -4368,7 +4368,7 @@ SK_BOOL DualNet; } else { DoPrintInterfaceChange = SK_TRUE; } - pAC->dev[Param.Para32[1]]->flags &= ~IFF_RUNNING; + netif_carrier_off(pAC->dev[Param.Para32[1]]); break; case SK_DRV_SWITCH_HARD: /* SK_U32 FromPortIdx SK_U32 ToPortIdx */ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT, @@ -4961,7 +4961,6 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, #ifdef CONFIG_NET_POLL_CONTROLLER dev->poll_controller = &SkGePollController; #endif - dev->flags &= ~IFF_RUNNING; SET_NETDEV_DEV(dev, &pdev->dev); SET_ETHTOOL_OPS(dev, &SkGeEthtoolOps); @@ -5035,7 +5034,6 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, dev->set_mac_address = &SkGeSetMacAddr; dev->do_ioctl = &SkGeIoctl; dev->change_mtu = &SkGeChangeMtu; - dev->flags &= ~IFF_RUNNING; SET_NETDEV_DEV(dev, &pdev->dev); SET_ETHTOOL_OPS(dev, &SkGeEthtoolOps); diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c index a7ffa64502d..ce116624f13 100644 --- a/drivers/net/tlan.c +++ b/drivers/net/tlan.c @@ -2807,7 +2807,7 @@ void TLan_PhyMonitor( struct net_device *dev ) if (priv->link) { priv->link = 0; printk(KERN_DEBUG "TLAN: %s has lost link\n", dev->name); - dev->flags &= ~IFF_RUNNING; + netif_carrier_off(dev); TLan_SetTimer( dev, (2*HZ), TLAN_TIMER_LINK_BEAT ); return; } @@ -2817,7 +2817,7 @@ void TLan_PhyMonitor( struct net_device *dev ) if ((phy_status & MII_GS_LINK) && !priv->link) { priv->link = 1; printk(KERN_DEBUG "TLAN: %s has reestablished link\n", dev->name); - dev->flags |= IFF_RUNNING; + netif_carrier_on(dev); } /* Setup a new monitor */ diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c index c098863bdd9..3873917a9c2 100644 --- a/drivers/net/tokenring/ibmtr.c +++ b/drivers/net/tokenring/ibmtr.c @@ -888,11 +888,6 @@ static int tok_open(struct net_device *dev) ti->sap_status = CLOSED; /* CLOSED or OPEN */ ti->open_failure = NO; /* NO or YES */ ti->open_mode = MANUAL; /* MANUAL or AUTOMATIC */ - /* 12/2000 not typical Linux, but we can use RUNNING to let us know when - the network has crapped out or cables are disconnected. Useful because - the IFF_UP flag stays up the whole time, until ifconfig tr0 down. - */ - dev->flags &= ~IFF_RUNNING; ti->sram_phys &= ~1; /* to reverse what we do in tok_close */ /* init the spinlock */ @@ -1242,7 +1237,7 @@ irqreturn_t tok_interrupt(int irq, void *dev_id, struct pt_regs *regs) ti->open_status = CLOSED; ti->sap_status = CLOSED; ti->open_mode = AUTOMATIC; - dev->flags &= ~IFF_RUNNING; + netif_carrier_off(dev); netif_stop_queue(dev); ti->open_action = RESTART; outb(0, dev->base_addr + ADAPTRESET); @@ -1323,7 +1318,7 @@ irqreturn_t tok_interrupt(int irq, void *dev_id, struct pt_regs *regs) break; } netif_wake_queue(dev); - dev->flags |= IFF_RUNNING;/*BMS 12/2000*/ + netif_carrier_on(dev); break; case DIR_INTERRUPT: case DIR_MOD_OPEN_PARAMS: @@ -1427,7 +1422,7 @@ irqreturn_t tok_interrupt(int irq, void *dev_id, struct pt_regs *regs) ring_status); if(ring_status& (REMOVE_RECV|AUTO_REMOVAL|LOBE_FAULT)){ netif_stop_queue(dev); - dev->flags &= ~IFF_RUNNING;/*not typical Linux*/ + netif_carrier_off(dev); DPRINTK("Remove received, or Auto-removal error" ", or Lobe fault\n"); DPRINTK("We'll try to reopen the closed adapter" diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c index 15e545f66cd..2b948ea397d 100644 --- a/drivers/net/wan/lmc/lmc_main.c +++ b/drivers/net/wan/lmc/lmc_main.c @@ -723,7 +723,7 @@ static void lmc_watchdog (unsigned long data) /*fold00*/ /* lmc_reset (sc); Why reset??? The link can go down ok */ /* Inform the world that link has been lost */ - dev->flags &= ~IFF_RUNNING; + netif_carrier_off(dev); } /* @@ -736,7 +736,7 @@ static void lmc_watchdog (unsigned long data) /*fold00*/ /* lmc_reset (sc); Again why reset??? */ /* Inform the world that link protocol is back up. */ - dev->flags |= IFF_RUNNING; + netif_carrier_on(dev); /* Now we have to tell the syncppp that we had an outage * and that it should deal. Calling sppp_reopen here @@ -1168,8 +1168,6 @@ static void lmc_running_reset (struct net_device *dev) /*fold00*/ sc->lmc_media->set_link_status (sc, 1); sc->lmc_media->set_status (sc, NULL); - //dev->flags |= IFF_RUNNING; - netif_wake_queue(dev); sc->lmc_txfull = 0; @@ -1233,8 +1231,6 @@ static int lmc_ifdown (struct net_device *dev) /*fold00*/ csr6 &= ~LMC_DEC_SR; /* Turn off the Receive bit */ LMC_CSR_WRITE (sc, csr_command, csr6); - dev->flags &= ~IFF_RUNNING; - sc->stats.rx_missed_errors += LMC_CSR_READ (sc, csr_missed_frames) & 0xffff; -- cgit v1.2.3 From 516cd15f1c0dd6eada3619915b113b4e5baccc7a Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Thu, 12 May 2005 19:47:12 -0400 Subject: [PATCH] PPP multilink fragmentation improvements Here's a patch for -mm for now. Not sure whose territory this falls in, so I'm sending it to everyone I can think of. :) Some time ago I did some experiments with using PPP multilink over largish numbers of channels (up to 32). The TCP performance was woeful due to wildly fluctuating packet latencies, which turned out to be because we would sometimes split a packet across all 32 channels, and sometimes we would send a whole packet down a single channel. This patch fixes those problems by being a bit cleverer about how the packets are split across the available channels, and in particular, it waits until at least half of the channels can take another fragment before starting to split up the next packet. The patch also fixes a buglet in the multilink reconstruction code where it would discard incoming packets that had just the multilink header and no data. Such packets are valid and shouldn't be discarded. Signed-off-by: Paul Mackerras Signed-off-by: Jeff Garzik --- drivers/net/ppp_generic.c | 177 ++++++++++++++++++++++++++++------------------ 1 file changed, 110 insertions(+), 67 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c index 3b377f6cd4a..ad4b58af6b7 100644 --- a/drivers/net/ppp_generic.c +++ b/drivers/net/ppp_generic.c @@ -1217,36 +1217,43 @@ ppp_push(struct ppp *ppp) */ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb) { - int nch, len, fragsize; + int len, fragsize; int i, bits, hdrlen, mtu; - int flen, fnb; + int flen; + int navail, nfree; + int nbigger; unsigned char *p, *q; struct list_head *list; struct channel *pch; struct sk_buff *frag; struct ppp_channel *chan; - nch = 0; + nfree = 0; /* # channels which have no packet already queued */ + navail = 0; /* total # of usable channels (not deregistered) */ hdrlen = (ppp->flags & SC_MP_XSHORTSEQ)? MPHDRLEN_SSN: MPHDRLEN; + i = 0; list = &ppp->channels; while ((list = list->next) != &ppp->channels) { pch = list_entry(list, struct channel, clist); - nch += pch->avail = (skb_queue_len(&pch->file.xq) == 0); - /* - * If a channel hasn't had a fragment yet, it has to get - * one before we send any fragments on later channels. - * If it can't take a fragment now, don't give any - * to subsequent channels. - */ - if (!pch->had_frag && !pch->avail) { - while ((list = list->next) != &ppp->channels) { - pch = list_entry(list, struct channel, clist); - pch->avail = 0; + navail += pch->avail = (pch->chan != NULL); + if (pch->avail) { + if (skb_queue_len(&pch->file.xq) == 0 + || !pch->had_frag) { + pch->avail = 2; + ++nfree; } - break; + if (!pch->had_frag && i < ppp->nxchan) + ppp->nxchan = i; } + ++i; } - if (nch == 0) + + /* + * Don't start sending this packet unless at least half of + * the channels are free. This gives much better TCP + * performance if we have a lot of channels. + */ + if (nfree == 0 || nfree < navail / 2) return 0; /* can't take now, leave it in xmit_pending */ /* Do protocol field compression (XXX this should be optional) */ @@ -1257,14 +1264,19 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb) --len; } - /* decide on fragment size */ + /* + * Decide on fragment size. + * We create a fragment for each free channel regardless of + * how small they are (i.e. even 0 length) in order to minimize + * the time that it will take to detect when a channel drops + * a fragment. + */ fragsize = len; - if (nch > 1) { - int maxch = ROUNDUP(len, MIN_FRAG_SIZE); - if (nch > maxch) - nch = maxch; - fragsize = ROUNDUP(fragsize, nch); - } + if (nfree > 1) + fragsize = ROUNDUP(fragsize, nfree); + /* nbigger channels get fragsize bytes, the rest get fragsize-1, + except if nbigger==0, then they all get fragsize. */ + nbigger = len % nfree; /* skip to the channel after the one we last used and start at that one */ @@ -1278,7 +1290,7 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb) /* create a fragment for each channel */ bits = B; - do { + while (nfree > 0 || len > 0) { list = list->next; if (list == &ppp->channels) { i = 0; @@ -1289,61 +1301,92 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb) if (!pch->avail) continue; + /* + * Skip this channel if it has a fragment pending already and + * we haven't given a fragment to all of the free channels. + */ + if (pch->avail == 1) { + if (nfree > 0) + continue; + } else { + --nfree; + pch->avail = 1; + } + /* check the channel's mtu and whether it is still attached. */ spin_lock_bh(&pch->downl); - if (pch->chan == 0 || (mtu = pch->chan->mtu) < hdrlen) { - /* can't use this channel */ + if (pch->chan == NULL) { + /* can't use this channel, it's being deregistered */ spin_unlock_bh(&pch->downl); pch->avail = 0; - if (--nch == 0) + if (--navail == 0) break; continue; } /* - * We have to create multiple fragments for this channel - * if fragsize is greater than the channel's mtu. + * Create a fragment for this channel of + * min(max(mtu+2-hdrlen, 4), fragsize, len) bytes. + * If mtu+2-hdrlen < 4, that is a ridiculously small + * MTU, so we use mtu = 2 + hdrlen. */ if (fragsize > len) fragsize = len; - for (flen = fragsize; flen > 0; flen -= fnb) { - fnb = flen; - if (fnb > mtu + 2 - hdrlen) - fnb = mtu + 2 - hdrlen; - if (fnb >= len) - bits |= E; - frag = alloc_skb(fnb + hdrlen, GFP_ATOMIC); - if (frag == 0) - goto noskb; - q = skb_put(frag, fnb + hdrlen); - /* make the MP header */ - q[0] = PPP_MP >> 8; - q[1] = PPP_MP; - if (ppp->flags & SC_MP_XSHORTSEQ) { - q[2] = bits + ((ppp->nxseq >> 8) & 0xf); - q[3] = ppp->nxseq; - } else { - q[2] = bits; - q[3] = ppp->nxseq >> 16; - q[4] = ppp->nxseq >> 8; - q[5] = ppp->nxseq; - } - - /* copy the data in */ - memcpy(q + hdrlen, p, fnb); - - /* try to send it down the channel */ - chan = pch->chan; - if (!chan->ops->start_xmit(chan, frag)) - skb_queue_tail(&pch->file.xq, frag); - pch->had_frag = 1; - p += fnb; - len -= fnb; - ++ppp->nxseq; - bits = 0; + flen = fragsize; + mtu = pch->chan->mtu + 2 - hdrlen; + if (mtu < 4) + mtu = 4; + if (flen > mtu) + flen = mtu; + if (flen == len && nfree == 0) + bits |= E; + frag = alloc_skb(flen + hdrlen + (flen == 0), GFP_ATOMIC); + if (frag == 0) + goto noskb; + q = skb_put(frag, flen + hdrlen); + + /* make the MP header */ + q[0] = PPP_MP >> 8; + q[1] = PPP_MP; + if (ppp->flags & SC_MP_XSHORTSEQ) { + q[2] = bits + ((ppp->nxseq >> 8) & 0xf); + q[3] = ppp->nxseq; + } else { + q[2] = bits; + q[3] = ppp->nxseq >> 16; + q[4] = ppp->nxseq >> 8; + q[5] = ppp->nxseq; } + + /* + * Copy the data in. + * Unfortunately there is a bug in older versions of + * the Linux PPP multilink reconstruction code where it + * drops 0-length fragments. Therefore we make sure the + * fragment has at least one byte of data. Any bytes + * we add in this situation will end up as padding on the + * end of the reconstructed packet. + */ + if (flen == 0) + *skb_put(frag, 1) = 0; + else + memcpy(q + hdrlen, p, flen); + + /* try to send it down the channel */ + chan = pch->chan; + if (skb_queue_len(&pch->file.xq) + || !chan->ops->start_xmit(chan, frag)) + skb_queue_tail(&pch->file.xq, frag); + pch->had_frag = 1; + p += flen; + len -= flen; + ++ppp->nxseq; + bits = 0; spin_unlock_bh(&pch->downl); - } while (len > 0); + + if (--nbigger == 0 && fragsize > 0) + --fragsize; + } ppp->nxchan = i; return 1; @@ -1422,7 +1465,7 @@ ppp_input(struct ppp_channel *chan, struct sk_buff *skb) kfree_skb(skb); return; } - + proto = PPP_PROTO(skb); read_lock_bh(&pch->upl); if (pch->ppp == 0 || proto >= 0xc000 || proto == PPP_CCPFRAG) { @@ -1691,7 +1734,7 @@ ppp_receive_mp_frame(struct ppp *ppp, struct sk_buff *skb, struct channel *pch) struct list_head *l; int mphdrlen = (ppp->flags & SC_MP_SHORTSEQ)? MPHDRLEN_SSN: MPHDRLEN; - if (!pskb_may_pull(skb, mphdrlen + 1) || ppp->mrru == 0) + if (!pskb_may_pull(skb, mphdrlen) || ppp->mrru == 0) goto err; /* no good, throw it away */ /* Decode sequence number and begin/end bits */ -- cgit v1.2.3 From e67d9d9d9e3934fc2844b795ed68f2d87e9a047a Mon Sep 17 00:00:00 2001 From: David Gibson Date: Thu, 12 May 2005 20:01:22 -0400 Subject: [PATCH] Orinoco: wireless stats updates Minor updates/bugfixes to the handling of wireless statistics. --- drivers/net/wireless/orinoco.c | 41 ++++++++++++++++++++++------------------- 1 file changed, 22 insertions(+), 19 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index a3a32430ae9..3eab7e0b850 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -686,7 +686,7 @@ static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev) struct orinoco_private *priv = netdev_priv(dev); hermes_t *hw = &priv->hw; struct iw_statistics *wstats = &priv->wstats; - int err = 0; + int err; unsigned long flags; if (! netif_device_present(dev)) { @@ -695,9 +695,21 @@ static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev) return NULL; /* FIXME: Can we do better than this? */ } + /* If busy, return the old stats. Returning NULL may cause + * the interface to disappear from /proc/net/wireless */ if (orinoco_lock(priv, &flags) != 0) - return NULL; /* FIXME: Erg, we've been signalled, how - * do we propagate this back up? */ + return wstats; + + /* We can't really wait for the tallies inquiry command to + * complete, so we just use the previous results and trigger + * a new tallies inquiry command for next time - Jean II */ + /* FIXME: Really we should wait for the inquiry to come back - + * as it is the stats we give don't make a whole lot of sense. + * Unfortunately, it's not clear how to do that within the + * wireless extensions framework: I think we're in user + * context, but a lock seems to be held by the time we get in + * here so we're not safe to sleep here. */ + hermes_inquire(hw, HERMES_INQ_TALLIES); if (priv->iw_mode == IW_MODE_ADHOC) { memset(&wstats->qual, 0, sizeof(wstats->qual)); @@ -716,25 +728,16 @@ static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev) err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_COMMSQUALITY, &cq); - - wstats->qual.qual = (int)le16_to_cpu(cq.qual); - wstats->qual.level = (int)le16_to_cpu(cq.signal) - 0x95; - wstats->qual.noise = (int)le16_to_cpu(cq.noise) - 0x95; - wstats->qual.updated = 7; + + if (!err) { + wstats->qual.qual = (int)le16_to_cpu(cq.qual); + wstats->qual.level = (int)le16_to_cpu(cq.signal) - 0x95; + wstats->qual.noise = (int)le16_to_cpu(cq.noise) - 0x95; + wstats->qual.updated = 7; + } } - /* We can't really wait for the tallies inquiry command to - * complete, so we just use the previous results and trigger - * a new tallies inquiry command for next time - Jean II */ - /* FIXME: We're in user context (I think?), so we should just - wait for the tallies to come through */ - err = hermes_inquire(hw, HERMES_INQ_TALLIES); - orinoco_unlock(priv, &flags); - - if (err) - return NULL; - return wstats; } -- cgit v1.2.3 From 7bb7c3a326f509acbdaf550b54fba565544ef200 Mon Sep 17 00:00:00 2001 From: David Gibson Date: Thu, 12 May 2005 20:02:10 -0400 Subject: [PATCH] Orinoco: ignore_disconnect flag Adds an ignore_disconnect module parameter. When enabled, the driver will continue attempting to send packets even when the firmware has told us we've lost our link to the AP. On some firmwares this substantially increases the usable range of the card (presumably because we have an interrmittent connection, but the firmware is able to queue the packets for us until we're connected again). On some other cards, it causes the firmware to fall in a screaming heap :( (hence, default off). Signed-off-by: David Gibson Signed-off-by: Jeff Garzik --- drivers/net/wireless/orinoco.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index 3eab7e0b850..01cf28568bc 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -492,6 +492,9 @@ EXPORT_SYMBOL(orinoco_debug); static int suppress_linkstatus; /* = 0 */ module_param(suppress_linkstatus, bool, 0644); MODULE_PARM_DESC(suppress_linkstatus, "Don't log link status changes"); +static int ignore_disconnect; /* = 0 */ +module_param(ignore_disconnect, int, 0644); +MODULE_PARM_DESC(ignore_disconnect, "Don't report lost link to the network layer"); /********************************************************************/ /* Compile time configuration and compatibility stuff */ @@ -1320,7 +1323,7 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) if (connected) netif_carrier_on(dev); - else + else if (!ignore_disconnect) netif_carrier_off(dev); if (newstatus != priv->last_linkstatus) -- cgit v1.2.3 From 1fc5eb642805fa724b67fd17f008b582b0400919 Mon Sep 17 00:00:00 2001 From: David Gibson Date: Thu, 12 May 2005 20:02:58 -0400 Subject: [PATCH] Orinoco: kill dump_recs Remove the dump_recs debugging iwpriv command. It will be replaced later with the simpler and more flexible get_rid command. Signed-off-by: David Gibson Signed-off-by: Jeff Garzik --- drivers/net/wireless/orinoco.c | 191 ----------------------------------------- 1 file changed, 191 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index 01cf28568bc..6e4d0e7d43a 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -607,7 +607,6 @@ struct hermes_rx_descriptor { static int orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); static int __orinoco_program_rids(struct net_device *dev); static void __orinoco_set_multicast_list(struct net_device *dev); -static int orinoco_debug_dump_recs(struct net_device *dev); /********************************************************************/ /* Internal helper functions */ @@ -3861,7 +3860,6 @@ orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) { SIOCIWFIRSTPRIV + 0x7, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "get_ibssport" }, - { SIOCIWLASTPRIV, 0, 0, "dump_recs" }, }; wrq->u.data.length = sizeof(privtab) / sizeof(privtab[0]); @@ -3949,14 +3947,6 @@ orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) err = orinoco_ioctl_getibssport(dev, wrq); break; - case SIOCIWLASTPRIV: - err = orinoco_debug_dump_recs(dev); - if (err) - printk(KERN_ERR "%s: Unable to dump records (%d)\n", - dev->name, err); - break; - - default: err = -EOPNOTSUPP; } @@ -3970,187 +3960,6 @@ orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) return err; } -struct { - u16 rid; - char *name; - int displaytype; -#define DISPLAY_WORDS 0 -#define DISPLAY_BYTES 1 -#define DISPLAY_STRING 2 -#define DISPLAY_XSTRING 3 -} record_table[] = { -#define DEBUG_REC(name,type) { HERMES_RID_##name, #name, DISPLAY_##type } - DEBUG_REC(CNFPORTTYPE,WORDS), - DEBUG_REC(CNFOWNMACADDR,BYTES), - DEBUG_REC(CNFDESIREDSSID,STRING), - DEBUG_REC(CNFOWNCHANNEL,WORDS), - DEBUG_REC(CNFOWNSSID,STRING), - DEBUG_REC(CNFOWNATIMWINDOW,WORDS), - DEBUG_REC(CNFSYSTEMSCALE,WORDS), - DEBUG_REC(CNFMAXDATALEN,WORDS), - DEBUG_REC(CNFPMENABLED,WORDS), - DEBUG_REC(CNFPMEPS,WORDS), - DEBUG_REC(CNFMULTICASTRECEIVE,WORDS), - DEBUG_REC(CNFMAXSLEEPDURATION,WORDS), - DEBUG_REC(CNFPMHOLDOVERDURATION,WORDS), - DEBUG_REC(CNFOWNNAME,STRING), - DEBUG_REC(CNFOWNDTIMPERIOD,WORDS), - DEBUG_REC(CNFMULTICASTPMBUFFERING,WORDS), - DEBUG_REC(CNFWEPENABLED_AGERE,WORDS), - DEBUG_REC(CNFMANDATORYBSSID_SYMBOL,WORDS), - DEBUG_REC(CNFWEPDEFAULTKEYID,WORDS), - DEBUG_REC(CNFDEFAULTKEY0,BYTES), - DEBUG_REC(CNFDEFAULTKEY1,BYTES), - DEBUG_REC(CNFMWOROBUST_AGERE,WORDS), - DEBUG_REC(CNFDEFAULTKEY2,BYTES), - DEBUG_REC(CNFDEFAULTKEY3,BYTES), - DEBUG_REC(CNFWEPFLAGS_INTERSIL,WORDS), - DEBUG_REC(CNFWEPKEYMAPPINGTABLE,WORDS), - DEBUG_REC(CNFAUTHENTICATION,WORDS), - DEBUG_REC(CNFMAXASSOCSTA,WORDS), - DEBUG_REC(CNFKEYLENGTH_SYMBOL,WORDS), - DEBUG_REC(CNFTXCONTROL,WORDS), - DEBUG_REC(CNFROAMINGMODE,WORDS), - DEBUG_REC(CNFHOSTAUTHENTICATION,WORDS), - DEBUG_REC(CNFRCVCRCERROR,WORDS), - DEBUG_REC(CNFMMLIFE,WORDS), - DEBUG_REC(CNFALTRETRYCOUNT,WORDS), - DEBUG_REC(CNFBEACONINT,WORDS), - DEBUG_REC(CNFAPPCFINFO,WORDS), - DEBUG_REC(CNFSTAPCFINFO,WORDS), - DEBUG_REC(CNFPRIORITYQUSAGE,WORDS), - DEBUG_REC(CNFTIMCTRL,WORDS), - DEBUG_REC(CNFTHIRTY2TALLY,WORDS), - DEBUG_REC(CNFENHSECURITY,WORDS), - DEBUG_REC(CNFGROUPADDRESSES,BYTES), - DEBUG_REC(CNFCREATEIBSS,WORDS), - DEBUG_REC(CNFFRAGMENTATIONTHRESHOLD,WORDS), - DEBUG_REC(CNFRTSTHRESHOLD,WORDS), - DEBUG_REC(CNFTXRATECONTROL,WORDS), - DEBUG_REC(CNFPROMISCUOUSMODE,WORDS), - DEBUG_REC(CNFBASICRATES_SYMBOL,WORDS), - DEBUG_REC(CNFPREAMBLE_SYMBOL,WORDS), - DEBUG_REC(CNFSHORTPREAMBLE,WORDS), - DEBUG_REC(CNFWEPKEYS_AGERE,BYTES), - DEBUG_REC(CNFEXCLUDELONGPREAMBLE,WORDS), - DEBUG_REC(CNFTXKEY_AGERE,WORDS), - DEBUG_REC(CNFAUTHENTICATIONRSPTO,WORDS), - DEBUG_REC(CNFBASICRATES,WORDS), - DEBUG_REC(CNFSUPPORTEDRATES,WORDS), - DEBUG_REC(CNFTICKTIME,WORDS), - DEBUG_REC(CNFSCANREQUEST,WORDS), - DEBUG_REC(CNFJOINREQUEST,WORDS), - DEBUG_REC(CNFAUTHENTICATESTATION,WORDS), - DEBUG_REC(CNFCHANNELINFOREQUEST,WORDS), - DEBUG_REC(MAXLOADTIME,WORDS), - DEBUG_REC(DOWNLOADBUFFER,WORDS), - DEBUG_REC(PRIID,WORDS), - DEBUG_REC(PRISUPRANGE,WORDS), - DEBUG_REC(CFIACTRANGES,WORDS), - DEBUG_REC(NICSERNUM,XSTRING), - DEBUG_REC(NICID,WORDS), - DEBUG_REC(MFISUPRANGE,WORDS), - DEBUG_REC(CFISUPRANGE,WORDS), - DEBUG_REC(CHANNELLIST,WORDS), - DEBUG_REC(REGULATORYDOMAINS,WORDS), - DEBUG_REC(TEMPTYPE,WORDS), -/* DEBUG_REC(CIS,BYTES), */ - DEBUG_REC(STAID,WORDS), - DEBUG_REC(CURRENTSSID,STRING), - DEBUG_REC(CURRENTBSSID,BYTES), - DEBUG_REC(COMMSQUALITY,WORDS), - DEBUG_REC(CURRENTTXRATE,WORDS), - DEBUG_REC(CURRENTBEACONINTERVAL,WORDS), - DEBUG_REC(CURRENTSCALETHRESHOLDS,WORDS), - DEBUG_REC(PROTOCOLRSPTIME,WORDS), - DEBUG_REC(SHORTRETRYLIMIT,WORDS), - DEBUG_REC(LONGRETRYLIMIT,WORDS), - DEBUG_REC(MAXTRANSMITLIFETIME,WORDS), - DEBUG_REC(MAXRECEIVELIFETIME,WORDS), - DEBUG_REC(CFPOLLABLE,WORDS), - DEBUG_REC(AUTHENTICATIONALGORITHMS,WORDS), - DEBUG_REC(PRIVACYOPTIONIMPLEMENTED,WORDS), - DEBUG_REC(OWNMACADDR,BYTES), - DEBUG_REC(SCANRESULTSTABLE,WORDS), - DEBUG_REC(PHYTYPE,WORDS), - DEBUG_REC(CURRENTCHANNEL,WORDS), - DEBUG_REC(CURRENTPOWERSTATE,WORDS), - DEBUG_REC(CCAMODE,WORDS), - DEBUG_REC(SUPPORTEDDATARATES,WORDS), - DEBUG_REC(BUILDSEQ,BYTES), - DEBUG_REC(FWID,XSTRING) -#undef DEBUG_REC -}; - -#define DEBUG_LTV_SIZE 128 - -static int orinoco_debug_dump_recs(struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - hermes_t *hw = &priv->hw; - u8 *val8; - u16 *val16; - int i,j; - u16 length; - int err; - - /* I'm not sure: we might have a lock here, so we'd better go - atomic, just in case. */ - val8 = kmalloc(DEBUG_LTV_SIZE + 2, GFP_ATOMIC); - if (! val8) - return -ENOMEM; - val16 = (u16 *)val8; - - for (i = 0; i < ARRAY_SIZE(record_table); i++) { - u16 rid = record_table[i].rid; - int len; - - memset(val8, 0, DEBUG_LTV_SIZE + 2); - - err = hermes_read_ltv(hw, USER_BAP, rid, DEBUG_LTV_SIZE, - &length, val8); - if (err) { - DEBUG(0, "Error %d reading RID 0x%04x\n", err, rid); - continue; - } - val16 = (u16 *)val8; - if (length == 0) - continue; - - printk(KERN_DEBUG "%-15s (0x%04x): length=%d (%d bytes)\tvalue=", - record_table[i].name, - rid, length, (length-1)*2); - len = min(((int)length-1)*2, DEBUG_LTV_SIZE); - - switch (record_table[i].displaytype) { - case DISPLAY_WORDS: - for (j = 0; j < len / 2; j++) - printk("%04X-", le16_to_cpu(val16[j])); - break; - - case DISPLAY_BYTES: - default: - for (j = 0; j < len; j++) - printk("%02X:", val8[j]); - break; - - case DISPLAY_STRING: - len = min(len, le16_to_cpu(val16[0])+2); - val8[len] = '\0'; - printk("\"%s\"", (char *)&val16[1]); - break; - - case DISPLAY_XSTRING: - printk("'%s'", (char *)val8); - } - - printk("\n"); - } - - kfree(val8); - - return 0; -} /********************************************************************/ /* Debugging */ -- cgit v1.2.3 From d51d8b1f249b23a717ae489d6ccf2c25030988e6 Mon Sep 17 00:00:00 2001 From: David Gibson Date: Thu, 12 May 2005 20:03:36 -0400 Subject: [PATCH] Orinoco: don't set channel in managed mode Don't attempt to manually set the channel in infrastructure mode, the firmware doesn't like that much. Also don't attempt to override the firmware's default channel number for IBSS mode (I believe default channel can vary by regulatory domain). Signed-off-by: David Gibson Signed-off-by: Jeff Garzik --- drivers/net/wireless/orinoco.c | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index 6e4d0e7d43a..b79aebf83e4 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -1615,17 +1615,15 @@ static int __orinoco_program_rids(struct net_device *dev) return err; } /* Set the channel/frequency */ - if (priv->channel == 0) { - printk(KERN_DEBUG "%s: Channel is 0 in __orinoco_program_rids()\n", dev->name); - if (priv->createibss) - priv->channel = 10; - } - err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFOWNCHANNEL, - priv->channel); - if (err) { - printk(KERN_ERR "%s: Error %d setting channel\n", - dev->name, err); - return err; + if (priv->channel != 0 && priv->iw_mode != IW_MODE_INFRA) { + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFOWNCHANNEL, + priv->channel); + if (err) { + printk(KERN_ERR "%s: Error %d setting channel %d\n", + dev->name, err, priv->channel); + return err; + } } if (priv->has_ibss) { @@ -2405,7 +2403,7 @@ static int orinoco_init(struct net_device *dev) /* By default use IEEE/IBSS ad-hoc mode if we have it */ priv->prefer_port3 = priv->has_port3 && (! priv->has_ibss); set_port_type(priv); - priv->channel = 10; /* default channel, more-or-less arbitrary */ + priv->channel = 0; /* use firmware default */ priv->promiscuous = 0; priv->wep_on = 0; -- cgit v1.2.3 From b24d4582fd93f3654d0a0a89f85e95140efc7fd4 Mon Sep 17 00:00:00 2001 From: David Gibson Date: Thu, 12 May 2005 20:04:16 -0400 Subject: [PATCH] Orinoco: consolidate allocation code Consolidate allocation of firmware buffers. In the process, remove duplication of a workaround for an old symbol firmware bug, and fix a bug where we could retry the workaround, even if it already failed to help. Signed-off-by: David Gibson Signed-off-by: Jeff Garzik --- drivers/net/wireless/orinoco.c | 23 ++--------------------- 1 file changed, 2 insertions(+), 21 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index b79aebf83e4..d910b89e648 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -1418,7 +1418,7 @@ int orinoco_reinit_firmware(struct net_device *dev) return err; err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); - if (err == -EIO) { + if (err == -EIO && priv->nicbuf_size > TX_NICBUF_SIZE_BUG) { /* Try workaround for old Symbol firmware bug */ printk(KERN_WARNING "%s: firmware ALLOC bug detected " "(old Symbol firmware?). Trying to work around... ", @@ -2270,7 +2270,7 @@ static int orinoco_init(struct net_device *dev) priv->nicbuf_size = IEEE802_11_FRAME_LEN + ETH_HLEN; /* Initialize the firmware */ - err = hermes_init(hw); + err = orinoco_reinit_firmware(dev); if (err != 0) { printk(KERN_ERR "%s: failed to initialize firmware (err = %d)\n", dev->name, err); @@ -2409,25 +2409,6 @@ static int orinoco_init(struct net_device *dev) priv->wep_on = 0; priv->tx_key = 0; - err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); - if (err == -EIO) { - /* Try workaround for old Symbol firmware bug */ - printk(KERN_WARNING "%s: firmware ALLOC bug detected " - "(old Symbol firmware?). Trying to work around... ", - dev->name); - - priv->nicbuf_size = TX_NICBUF_SIZE_BUG; - err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); - if (err) - printk("failed!\n"); - else - printk("ok.\n"); - } - if (err) { - printk("%s: Error %d allocating Tx buffer\n", dev->name, err); - goto out; - } - /* Make the hardware available, as long as it hasn't been * removed elsewhere (e.g. by PCMCIA hot unplug) */ spin_lock_irq(&priv->lock); -- cgit v1.2.3 From 126fa4b9ca5d9d7cb7d46f779ad3bd3631ca387c Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Thu, 12 May 2005 20:09:17 -0400 Subject: [PATCH] r8169: incoming frame length check The size of the incoming frame is not correctly checked. The RxMaxSize register (0xDA) does not work as expected and incoming frames whose size exceeds the MTU actually end spanning multiple descriptors. The first Rx descriptor contains the size of the whole frame (or some garbage in its place). The driver does not expect something above the space allocated to the current skb and crashes loudly when it issues a skb_put. The fix contains two parts: - disable hardware Rx size filtering: so far it only proved to be able to trigger some new fancy errors; - drop multi-descriptors frame: as the driver allocates MTU sized Rx buffers, it provides an adequate filtering. As a bonus, wrong descriptors were not returned to the asic after their processing. Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/r8169.c | 31 +++++++++++++++++++++++++------ 1 file changed, 25 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index c59507f8a76..b3768d84474 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -1585,8 +1585,8 @@ rtl8169_hw_start(struct net_device *dev) RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb); RTL_W8(EarlyTxThres, EarlyTxThld); - /* For gigabit rtl8169, MTU + header + CRC + VLAN */ - RTL_W16(RxMaxSize, tp->rx_buf_sz); + /* Low hurts. Let's disable the filtering. */ + RTL_W16(RxMaxSize, 16383); /* Set Rx Config register */ i = rtl8169_rx_config | @@ -2127,6 +2127,11 @@ rtl8169_tx_interrupt(struct net_device *dev, struct rtl8169_private *tp, } } +static inline int rtl8169_fragmented_frame(u32 status) +{ + return (status & (FirstFrag | LastFrag)) != (FirstFrag | LastFrag); +} + static inline void rtl8169_rx_csum(struct sk_buff *skb, struct RxDesc *desc) { u32 opts1 = le32_to_cpu(desc->opts1); @@ -2177,27 +2182,41 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp, while (rx_left > 0) { unsigned int entry = cur_rx % NUM_RX_DESC; + struct RxDesc *desc = tp->RxDescArray + entry; u32 status; rmb(); - status = le32_to_cpu(tp->RxDescArray[entry].opts1); + status = le32_to_cpu(desc->opts1); if (status & DescOwn) break; if (status & RxRES) { - printk(KERN_INFO "%s: Rx ERROR!!!\n", dev->name); + printk(KERN_INFO "%s: Rx ERROR. status = %08x\n", + dev->name, status); tp->stats.rx_errors++; if (status & (RxRWT | RxRUNT)) tp->stats.rx_length_errors++; if (status & RxCRC) tp->stats.rx_crc_errors++; + rtl8169_mark_to_asic(desc, tp->rx_buf_sz); } else { - struct RxDesc *desc = tp->RxDescArray + entry; struct sk_buff *skb = tp->Rx_skbuff[entry]; int pkt_size = (status & 0x00001FFF) - 4; void (*pci_action)(struct pci_dev *, dma_addr_t, size_t, int) = pci_dma_sync_single_for_device; + /* + * The driver does not support incoming fragmented + * frames. They are seen as a symptom of over-mtu + * sized frames. + */ + if (unlikely(rtl8169_fragmented_frame(status))) { + tp->stats.rx_dropped++; + tp->stats.rx_length_errors++; + rtl8169_mark_to_asic(desc, tp->rx_buf_sz); + goto move_on; + } + rtl8169_rx_csum(skb, desc); pci_dma_sync_single_for_cpu(tp->pci_dev, @@ -2224,7 +2243,7 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp, tp->stats.rx_bytes += pkt_size; tp->stats.rx_packets++; } - +move_on: cur_rx++; rx_left--; } -- cgit v1.2.3 From da369b01d49b34803265096eb92a2d6da61cf0d0 Mon Sep 17 00:00:00 2001 From: Daniele Venzano Date: Thu, 12 May 2005 20:13:14 -0400 Subject: [PATCH] More ethtool support for sis900 and warning fix Add support to sis900 for the following ethtool ops: - get_link - get_settings - set_settings - nway_reset Signed-off-by: Daniele Venzano Signed-off-by: Jeff Garzik --- drivers/net/sis900.c | 52 +++++++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 49 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c index 3e9d9aab058..3107aed0fb5 100644 --- a/drivers/net/sis900.c +++ b/drivers/net/sis900.c @@ -162,6 +162,7 @@ struct sis900_private { struct mii_phy * mii; struct mii_phy * first_mii; /* record the first mii structure */ unsigned int cur_phy; + struct mii_if_info mii_info; struct timer_list timer; /* Link status detection timer. */ u8 autong_complete; /* 1: auto-negotiate complete */ @@ -203,7 +204,7 @@ static int sis900_open(struct net_device *net_dev); static int sis900_mii_probe (struct net_device * net_dev); static void sis900_init_rxfilter (struct net_device * net_dev); static u16 read_eeprom(long ioaddr, int location); -static u16 mdio_read(struct net_device *net_dev, int phy_id, int location); +static int mdio_read(struct net_device *net_dev, int phy_id, int location); static void mdio_write(struct net_device *net_dev, int phy_id, int location, int val); static void sis900_timer(unsigned long data); static void sis900_check_mode (struct net_device *net_dev, struct mii_phy *mii_phy); @@ -478,7 +479,13 @@ static int __devinit sis900_probe(struct pci_dev *pci_dev, sis_priv->msg_enable = sis900_debug; else sis_priv->msg_enable = SIS900_DEF_MSG; - + + sis_priv->mii_info.dev = net_dev; + sis_priv->mii_info.mdio_read = mdio_read; + sis_priv->mii_info.mdio_write = mdio_write; + sis_priv->mii_info.phy_id_mask = 0x1f; + sis_priv->mii_info.reg_num_mask = 0x1f; + /* Get Mac address according to the chip revision */ pci_read_config_byte(pci_dev, PCI_CLASS_REVISION, &(sis_priv->chipset_rev)); if(netif_msg_probe(sis_priv)) @@ -725,6 +732,8 @@ static u16 sis900_default_phy(struct net_device * net_dev) pci_name(sis_priv->pci_dev), sis_priv->cur_phy); } + sis_priv->mii_info.phy_id = sis_priv->cur_phy; + status = mdio_read(net_dev, sis_priv->cur_phy, MII_CONTROL); status &= (~MII_CNTL_ISOLATE); @@ -852,7 +861,7 @@ static void mdio_reset(long mdio_addr) * Please see SiS7014 or ICS spec */ -static u16 mdio_read(struct net_device *net_dev, int phy_id, int location) +static int mdio_read(struct net_device *net_dev, int phy_id, int location) { long mdio_addr = net_dev->base_addr + mear; int mii_cmd = MIIread|(phy_id<msg_enable = value; } +static u32 sis900_get_link(struct net_device *net_dev) +{ + struct sis900_private *sis_priv = net_dev->priv; + return mii_link_ok(&sis_priv->mii_info); +} + +static int sis900_get_settings(struct net_device *net_dev, + struct ethtool_cmd *cmd) +{ + struct sis900_private *sis_priv = net_dev->priv; + spin_lock_irq(&sis_priv->lock); + mii_ethtool_gset(&sis_priv->mii_info, cmd); + spin_unlock_irq(&sis_priv->lock); + return 0; +} + +static int sis900_set_settings(struct net_device *net_dev, + struct ethtool_cmd *cmd) +{ + struct sis900_private *sis_priv = net_dev->priv; + int rt; + spin_lock_irq(&sis_priv->lock); + rt = mii_ethtool_sset(&sis_priv->mii_info, cmd); + spin_unlock_irq(&sis_priv->lock); + return rt; +} + +static int sis900_nway_reset(struct net_device *net_dev) +{ + struct sis900_private *sis_priv = net_dev->priv; + return mii_nway_restart(&sis_priv->mii_info); +} + static struct ethtool_ops sis900_ethtool_ops = { .get_drvinfo = sis900_get_drvinfo, .get_msglevel = sis900_get_msglevel, .set_msglevel = sis900_set_msglevel, + .get_link = sis900_get_link, + .get_settings = sis900_get_settings, + .set_settings = sis900_set_settings, + .nway_reset = sis900_nway_reset, }; /** -- cgit v1.2.3 From baef58b1b09ac0e9339e021144b921560482c8bd Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Thu, 12 May 2005 20:14:36 -0400 Subject: [netdrvr] new driver skge, for SysKonnect cards --- drivers/net/Kconfig | 12 + drivers/net/Makefile | 1 + drivers/net/skge.c | 3385 ++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/net/skge.h | 3005 ++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 6403 insertions(+) create mode 100644 drivers/net/skge.c create mode 100644 drivers/net/skge.h (limited to 'drivers/net') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 3a0a55b62aa..959f8ae6e0c 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1931,6 +1931,18 @@ config R8169_VLAN If in doubt, say Y. +config SKGE + tristate "New SysKonnect GigaEthernet support (EXPERIMENTAL)" + depends on PCI && EXPERIMENTAL + select CRC32 + ---help--- + This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx + and related Gigabit Ethernet adapters. It is a new smaller driver + driver with better performance and more complete ethtool support. + + It does not support the link failover and network management + features that "portable" vendor supplied sk98lin driver does. + config SK98LIN tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support" depends on PCI diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 6202b10dbb4..43c441abeff 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -52,6 +52,7 @@ obj-$(CONFIG_STNIC) += stnic.o 8390.o obj-$(CONFIG_FEALNX) += fealnx.o obj-$(CONFIG_TIGON3) += tg3.o obj-$(CONFIG_TC35815) += tc35815.o +obj-$(CONFIG_SKGE) += skge.o obj-$(CONFIG_SK98LIN) += sk98lin/ obj-$(CONFIG_SKFP) += skfp/ obj-$(CONFIG_VIA_RHINE) += via-rhine.o diff --git a/drivers/net/skge.c b/drivers/net/skge.c new file mode 100644 index 00000000000..11e158346ac --- /dev/null +++ b/drivers/net/skge.c @@ -0,0 +1,3385 @@ +/* + * New driver for Marvell Yukon chipset and SysKonnect Gigabit + * Ethernet adapters. Based on earlier sk98lin, e100 and + * FreeBSD if_sk drivers. + * + * This driver intentionally does not support all the features + * of the original driver such as link fail-over and link management because + * those should be done at higher levels. + * + * Copyright (C) 2004, Stephen Hemminger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "skge.h" + +#define DRV_NAME "skge" +#define DRV_VERSION "0.6" +#define PFX DRV_NAME " " + +#define DEFAULT_TX_RING_SIZE 128 +#define DEFAULT_RX_RING_SIZE 512 +#define MAX_TX_RING_SIZE 1024 +#define MAX_RX_RING_SIZE 4096 +#define PHY_RETRIES 1000 +#define ETH_JUMBO_MTU 9000 +#define TX_WATCHDOG (5 * HZ) +#define NAPI_WEIGHT 64 +#define BLINK_HZ (HZ/4) +#define LINK_POLL_HZ (HZ/10) + +MODULE_DESCRIPTION("SysKonnect Gigabit Ethernet driver"); +MODULE_AUTHOR("Stephen Hemminger "); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +static const u32 default_msg + = NETIF_MSG_DRV| NETIF_MSG_PROBE| NETIF_MSG_LINK + | NETIF_MSG_IFUP| NETIF_MSG_IFDOWN; + +static int debug = -1; /* defaults above */ +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); + +static const struct pci_device_id skge_id_table[] = { + { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C940, + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C940B, + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_GE, + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_YU, + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_SYSKONNECT, 0x9E00, /* SK-9Exx */ + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_DLINK, PCI_DEVICE_ID_DLINK_DGE510T, + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_MARVELL, 0x4320, /* Gigabit Ethernet Controller */ + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_MARVELL, 0x5005, /* Marvell (11ab), Belkin */ + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_CNET, PCI_DEVICE_ID_CNET_GIGACARD, + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_LINKSYS, PCI_DEVICE_ID_LINKSYS_EG1032, + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_LINKSYS, PCI_DEVICE_ID_LINKSYS_EG1064, + PCI_ANY_ID, PCI_ANY_ID }, + { 0 } +}; +MODULE_DEVICE_TABLE(pci, skge_id_table); + +static int skge_up(struct net_device *dev); +static int skge_down(struct net_device *dev); +static void skge_tx_clean(struct skge_port *skge); +static void skge_xm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val); +static void skge_gm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val); +static void genesis_get_stats(struct skge_port *skge, u64 *data); +static void yukon_get_stats(struct skge_port *skge, u64 *data); +static void yukon_init(struct skge_hw *hw, int port); +static void yukon_reset(struct skge_hw *hw, int port); +static void genesis_mac_init(struct skge_hw *hw, int port); +static void genesis_reset(struct skge_hw *hw, int port); + +static const int txqaddr[] = { Q_XA1, Q_XA2 }; +static const int rxqaddr[] = { Q_R1, Q_R2 }; +static const u32 rxirqmask[] = { IS_R1_F, IS_R2_F }; +static const u32 txirqmask[] = { IS_XA1_F, IS_XA2_F }; + +/* Don't need to look at whole 16K. + * last interesting register is descriptor poll timer. + */ +#define SKGE_REGS_LEN (29*128) + +static int skge_get_regs_len(struct net_device *dev) +{ + return SKGE_REGS_LEN; +} + +/* + * Returns copy of control register region + * I/O region is divided into banks and certain regions are unreadable + */ +static void skge_get_regs(struct net_device *dev, struct ethtool_regs *regs, + void *p) +{ + const struct skge_port *skge = netdev_priv(dev); + unsigned long offs; + const void __iomem *io = skge->hw->regs; + static const unsigned long bankmap + = (1<<0) | (1<<2) | (1<<8) | (1<<9) + | (1<<12) | (1<<13) | (1<<14) | (1<<15) | (1<<16) + | (1<<17) | (1<<20) | (1<<21) | (1<<22) | (1<<23) + | (1<<24) | (1<<25) | (1<<26) | (1<<27) | (1<<28); + + regs->version = 1; + for (offs = 0; offs < regs->len; offs += 128) { + u32 len = min_t(u32, 128, regs->len - offs); + + if (bankmap & (1<<(offs/128))) + memcpy_fromio(p + offs, io + offs, len); + else + memset(p + offs, 0, len); + } +} + +/* Wake on Lan only supported on Yukon chps with rev 1 or above */ +static int wol_supported(const struct skge_hw *hw) +{ + return !((hw->chip_id == CHIP_ID_GENESIS || + (hw->chip_id == CHIP_ID_YUKON && chip_rev(hw) == 0))); +} + +static void skge_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct skge_port *skge = netdev_priv(dev); + + wol->supported = wol_supported(skge->hw) ? WAKE_MAGIC : 0; + wol->wolopts = skge->wol ? WAKE_MAGIC : 0; +} + +static int skge_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct skge_port *skge = netdev_priv(dev); + struct skge_hw *hw = skge->hw; + + if(wol->wolopts != WAKE_MAGIC && wol->wolopts != 0) + return -EOPNOTSUPP; + + if (wol->wolopts == WAKE_MAGIC && !wol_supported(hw)) + return -EOPNOTSUPP; + + skge->wol = wol->wolopts == WAKE_MAGIC; + + if (skge->wol) { + memcpy_toio(hw->regs + WOL_MAC_ADDR, dev->dev_addr, ETH_ALEN); + + skge_write16(hw, WOL_CTRL_STAT, + WOL_CTL_ENA_PME_ON_MAGIC_PKT | + WOL_CTL_ENA_MAGIC_PKT_UNIT); + } else + skge_write16(hw, WOL_CTRL_STAT, WOL_CTL_DEFAULT); + + return 0; +} + + +static int skge_get_settings(struct net_device *dev, + struct ethtool_cmd *ecmd) +{ + struct skge_port *skge = netdev_priv(dev); + struct skge_hw *hw = skge->hw; + + ecmd->transceiver = XCVR_INTERNAL; + + if (iscopper(hw)) { + if (hw->chip_id == CHIP_ID_GENESIS) + ecmd->supported = SUPPORTED_1000baseT_Full + | SUPPORTED_1000baseT_Half + | SUPPORTED_Autoneg | SUPPORTED_TP; + else { + ecmd->supported = SUPPORTED_10baseT_Half + | SUPPORTED_10baseT_Full + | SUPPORTED_100baseT_Half + | SUPPORTED_100baseT_Full + | SUPPORTED_1000baseT_Half + | SUPPORTED_1000baseT_Full + | SUPPORTED_Autoneg| SUPPORTED_TP; + + if (hw->chip_id == CHIP_ID_YUKON) + ecmd->supported &= ~SUPPORTED_1000baseT_Half; + + else if (hw->chip_id == CHIP_ID_YUKON_FE) + ecmd->supported &= ~(SUPPORTED_1000baseT_Half + | SUPPORTED_1000baseT_Full); + } + + ecmd->port = PORT_TP; + ecmd->phy_address = hw->phy_addr; + } else { + ecmd->supported = SUPPORTED_1000baseT_Full + | SUPPORTED_FIBRE + | SUPPORTED_Autoneg; + + ecmd->port = PORT_FIBRE; + } + + ecmd->advertising = skge->advertising; + ecmd->autoneg = skge->autoneg; + ecmd->speed = skge->speed; + ecmd->duplex = skge->duplex; + return 0; +} + +static u32 skge_modes(const struct skge_hw *hw) +{ + u32 modes = ADVERTISED_Autoneg + | ADVERTISED_1000baseT_Full | ADVERTISED_1000baseT_Half + | ADVERTISED_100baseT_Full | ADVERTISED_100baseT_Half + | ADVERTISED_10baseT_Full | ADVERTISED_10baseT_Half; + + if (iscopper(hw)) { + modes |= ADVERTISED_TP; + switch(hw->chip_id) { + case CHIP_ID_GENESIS: + modes &= ~(ADVERTISED_100baseT_Full + | ADVERTISED_100baseT_Half + | ADVERTISED_10baseT_Full + | ADVERTISED_10baseT_Half); + break; + + case CHIP_ID_YUKON: + modes &= ~ADVERTISED_1000baseT_Half; + break; + + case CHIP_ID_YUKON_FE: + modes &= ~(ADVERTISED_1000baseT_Half|ADVERTISED_1000baseT_Full); + break; + } + } else { + modes |= ADVERTISED_FIBRE; + modes &= ~ADVERTISED_1000baseT_Half; + } + return modes; +} + +static int skge_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) +{ + struct skge_port *skge = netdev_priv(dev); + const struct skge_hw *hw = skge->hw; + + if (ecmd->autoneg == AUTONEG_ENABLE) { + if (ecmd->advertising & skge_modes(hw)) + return -EINVAL; + } else { + switch(ecmd->speed) { + case SPEED_1000: + if (hw->chip_id == CHIP_ID_YUKON_FE) + return -EINVAL; + break; + case SPEED_100: + case SPEED_10: + if (iscopper(hw) || hw->chip_id == CHIP_ID_GENESIS) + return -EINVAL; + break; + default: + return -EINVAL; + } + } + + skge->autoneg = ecmd->autoneg; + skge->speed = ecmd->speed; + skge->duplex = ecmd->duplex; + skge->advertising = ecmd->advertising; + + if (netif_running(dev)) { + skge_down(dev); + skge_up(dev); + } + return (0); +} + +static void skge_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct skge_port *skge = netdev_priv(dev); + + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + strcpy(info->fw_version, "N/A"); + strcpy(info->bus_info, pci_name(skge->hw->pdev)); +} + +static const struct skge_stat { + char name[ETH_GSTRING_LEN]; + u16 xmac_offset; + u16 gma_offset; +} skge_stats[] = { + { "tx_bytes", XM_TXO_OK_HI, GM_TXO_OK_HI }, + { "rx_bytes", XM_RXO_OK_HI, GM_RXO_OK_HI }, + + { "tx_broadcast", XM_TXF_BC_OK, GM_TXF_BC_OK }, + { "rx_broadcast", XM_RXF_BC_OK, GM_RXF_BC_OK }, + { "tx_multicast", XM_TXF_MC_OK, GM_TXF_MC_OK }, + { "rx_multicast", XM_RXF_MC_OK, GM_RXF_MC_OK }, + { "tx_unicast", XM_TXF_UC_OK, GM_TXF_UC_OK }, + { "rx_unicast", XM_RXF_UC_OK, GM_RXF_UC_OK }, + { "tx_mac_pause", XM_TXF_MPAUSE, GM_TXF_MPAUSE }, + { "rx_mac_pause", XM_RXF_MPAUSE, GM_RXF_MPAUSE }, + + { "collisions", XM_TXF_SNG_COL, GM_TXF_SNG_COL }, + { "multi_collisions", XM_TXF_MUL_COL, GM_TXF_MUL_COL }, + { "aborted", XM_TXF_ABO_COL, GM_TXF_ABO_COL }, + { "late_collision", XM_TXF_LAT_COL, GM_TXF_LAT_COL }, + { "fifo_underrun", XM_TXE_FIFO_UR, GM_TXE_FIFO_UR }, + { "fifo_overflow", XM_RXE_FIFO_OV, GM_RXE_FIFO_OV }, + + { "rx_toolong", XM_RXF_LNG_ERR, GM_RXF_LNG_ERR }, + { "rx_jabber", XM_RXF_JAB_PKT, GM_RXF_JAB_PKT }, + { "rx_runt", XM_RXE_RUNT, GM_RXE_FRAG }, + { "rx_too_long", XM_RXF_LNG_ERR, GM_RXF_LNG_ERR }, + { "rx_fcs_error", XM_RXF_FCS_ERR, GM_RXF_FCS_ERR }, +}; + +static int skge_get_stats_count(struct net_device *dev) +{ + return ARRAY_SIZE(skge_stats); +} + +static void skge_get_ethtool_stats(struct net_device *dev, + struct ethtool_stats *stats, u64 *data) +{ + struct skge_port *skge = netdev_priv(dev); + + if (skge->hw->chip_id == CHIP_ID_GENESIS) + genesis_get_stats(skge, data); + else + yukon_get_stats(skge, data); +} + +/* Use hardware MIB variables for critical path statistics and + * transmit feedback not reported at interrupt. + * Other errors are accounted for in interrupt handler. + */ +static struct net_device_stats *skge_get_stats(struct net_device *dev) +{ + struct skge_port *skge = netdev_priv(dev); + u64 data[ARRAY_SIZE(skge_stats)]; + + if (skge->hw->chip_id == CHIP_ID_GENESIS) + genesis_get_stats(skge, data); + else + yukon_get_stats(skge, data); + + skge->net_stats.tx_bytes = data[0]; + skge->net_stats.rx_bytes = data[1]; + skge->net_stats.tx_packets = data[2] + data[4] + data[6]; + skge->net_stats.rx_packets = data[3] + data[5] + data[7]; + skge->net_stats.multicast = data[5] + data[7]; + skge->net_stats.collisions = data[10]; + skge->net_stats.tx_aborted_errors = data[12]; + + return &skge->net_stats; +} + +static void skge_get_strings(struct net_device *dev, u32 stringset, u8 *data) +{ + int i; + + switch(stringset) { + case ETH_SS_STATS: + for (i = 0; i < ARRAY_SIZE(skge_stats); i++) + memcpy(data + i * ETH_GSTRING_LEN, + skge_stats[i].name, ETH_GSTRING_LEN); + break; + } +} + +static void skge_get_ring_param(struct net_device *dev, + struct ethtool_ringparam *p) +{ + struct skge_port *skge = netdev_priv(dev); + + p->rx_max_pending = MAX_RX_RING_SIZE; + p->tx_max_pending = MAX_TX_RING_SIZE; + p->rx_mini_max_pending = 0; + p->rx_jumbo_max_pending = 0; + + p->rx_pending = skge->rx_ring.count; + p->tx_pending = skge->tx_ring.count; + p->rx_mini_pending = 0; + p->rx_jumbo_pending = 0; +} + +static int skge_set_ring_param(struct net_device *dev, + struct ethtool_ringparam *p) +{ + struct skge_port *skge = netdev_priv(dev); + + if (p->rx_pending == 0 || p->rx_pending > MAX_RX_RING_SIZE || + p->tx_pending == 0 || p->tx_pending > MAX_TX_RING_SIZE) + return -EINVAL; + + skge->rx_ring.count = p->rx_pending; + skge->tx_ring.count = p->tx_pending; + + if (netif_running(dev)) { + skge_down(dev); + skge_up(dev); + } + + return 0; +} + +static u32 skge_get_msglevel(struct net_device *netdev) +{ + struct skge_port *skge = netdev_priv(netdev); + return skge->msg_enable; +} + +static void skge_set_msglevel(struct net_device *netdev, u32 value) +{ + struct skge_port *skge = netdev_priv(netdev); + skge->msg_enable = value; +} + +static int skge_nway_reset(struct net_device *dev) +{ + struct skge_port *skge = netdev_priv(dev); + struct skge_hw *hw = skge->hw; + int port = skge->port; + + if (skge->autoneg != AUTONEG_ENABLE || !netif_running(dev)) + return -EINVAL; + + spin_lock_bh(&hw->phy_lock); + if (hw->chip_id == CHIP_ID_GENESIS) { + genesis_reset(hw, port); + genesis_mac_init(hw, port); + } else { + yukon_reset(hw, port); + yukon_init(hw, port); + } + spin_unlock_bh(&hw->phy_lock); + return 0; +} + +static int skge_set_sg(struct net_device *dev, u32 data) +{ + struct skge_port *skge = netdev_priv(dev); + struct skge_hw *hw = skge->hw; + + if (hw->chip_id == CHIP_ID_GENESIS && data) + return -EOPNOTSUPP; + return ethtool_op_set_sg(dev, data); +} + +static int skge_set_tx_csum(struct net_device *dev, u32 data) +{ + struct skge_port *skge = netdev_priv(dev); + struct skge_hw *hw = skge->hw; + + if (hw->chip_id == CHIP_ID_GENESIS && data) + return -EOPNOTSUPP; + + return ethtool_op_set_tx_csum(dev, data); +} + +static u32 skge_get_rx_csum(struct net_device *dev) +{ + struct skge_port *skge = netdev_priv(dev); + + return skge->rx_csum; +} + +/* Only Yukon supports checksum offload. */ +static int skge_set_rx_csum(struct net_device *dev, u32 data) +{ + struct skge_port *skge = netdev_priv(dev); + + if (skge->hw->chip_id == CHIP_ID_GENESIS && data) + return -EOPNOTSUPP; + + skge->rx_csum = data; + return 0; +} + +/* Only Yukon II supports TSO (not implemented yet) */ +static int skge_set_tso(struct net_device *dev, u32 data) +{ + if (data) + return -EOPNOTSUPP; + return 0; +} + +static void skge_get_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *ecmd) +{ + struct skge_port *skge = netdev_priv(dev); + + ecmd->tx_pause = (skge->flow_control == FLOW_MODE_LOC_SEND) + || (skge->flow_control == FLOW_MODE_SYMMETRIC); + ecmd->rx_pause = (skge->flow_control == FLOW_MODE_REM_SEND) + || (skge->flow_control == FLOW_MODE_SYMMETRIC); + + ecmd->autoneg = skge->autoneg; +} + +static int skge_set_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *ecmd) +{ + struct skge_port *skge = netdev_priv(dev); + + skge->autoneg = ecmd->autoneg; + if (ecmd->rx_pause && ecmd->tx_pause) + skge->flow_control = FLOW_MODE_SYMMETRIC; + else if(ecmd->rx_pause && !ecmd->tx_pause) + skge->flow_control = FLOW_MODE_REM_SEND; + else if(!ecmd->rx_pause && ecmd->tx_pause) + skge->flow_control = FLOW_MODE_LOC_SEND; + else + skge->flow_control = FLOW_MODE_NONE; + + if (netif_running(dev)) { + skge_down(dev); + skge_up(dev); + } + return 0; +} + +/* Chip internal frequency for clock calculations */ +static inline u32 hwkhz(const struct skge_hw *hw) +{ + if (hw->chip_id == CHIP_ID_GENESIS) + return 53215; /* or: 53.125 MHz */ + else if (hw->chip_id == CHIP_ID_YUKON_EC) + return 125000; /* or: 125.000 MHz */ + else + return 78215; /* or: 78.125 MHz */ +} + +/* Chip hz to microseconds */ +static inline u32 skge_clk2usec(const struct skge_hw *hw, u32 ticks) +{ + return (ticks * 1000) / hwkhz(hw); +} + +/* Microseconds to chip hz */ +static inline u32 skge_usecs2clk(const struct skge_hw *hw, u32 usec) +{ + return hwkhz(hw) * usec / 1000; +} + +static int skge_get_coalesce(struct net_device *dev, + struct ethtool_coalesce *ecmd) +{ + struct skge_port *skge = netdev_priv(dev); + struct skge_hw *hw = skge->hw; + int port = skge->port; + + ecmd->rx_coalesce_usecs = 0; + ecmd->tx_coalesce_usecs = 0; + + if (skge_read32(hw, B2_IRQM_CTRL) & TIM_START) { + u32 delay = skge_clk2usec(hw, skge_read32(hw, B2_IRQM_INI)); + u32 msk = skge_read32(hw, B2_IRQM_MSK); + + if (msk & rxirqmask[port]) + ecmd->rx_coalesce_usecs = delay; + if (msk & txirqmask[port]) + ecmd->tx_coalesce_usecs = delay; + } + + return 0; +} + +/* Note: interrupt timer is per board, but can turn on/off per port */ +static int skge_set_coalesce(struct net_device *dev, + struct ethtool_coalesce *ecmd) +{ + struct skge_port *skge = netdev_priv(dev); + struct skge_hw *hw = skge->hw; + int port = skge->port; + u32 msk = skge_read32(hw, B2_IRQM_MSK); + u32 delay = 25; + + if (ecmd->rx_coalesce_usecs == 0) + msk &= ~rxirqmask[port]; + else if (ecmd->rx_coalesce_usecs < 25 || + ecmd->rx_coalesce_usecs > 33333) + return -EINVAL; + else { + msk |= rxirqmask[port]; + delay = ecmd->rx_coalesce_usecs; + } + + if (ecmd->tx_coalesce_usecs == 0) + msk &= ~txirqmask[port]; + else if (ecmd->tx_coalesce_usecs < 25 || + ecmd->tx_coalesce_usecs > 33333) + return -EINVAL; + else { + msk |= txirqmask[port]; + delay = min(delay, ecmd->rx_coalesce_usecs); + } + + skge_write32(hw, B2_IRQM_MSK, msk); + if (msk == 0) + skge_write32(hw, B2_IRQM_CTRL, TIM_STOP); + else { + skge_write32(hw, B2_IRQM_INI, skge_usecs2clk(hw, delay)); + skge_write32(hw, B2_IRQM_CTRL, TIM_START); + } + return 0; +} + +static void skge_led_on(struct skge_hw *hw, int port) +{ + if (hw->chip_id == CHIP_ID_GENESIS) { + skge_write8(hw, SKGEMAC_REG(port, LNK_LED_REG), LINKLED_ON); + skge_write8(hw, B0_LED, LED_STAT_ON); + + skge_write8(hw, SKGEMAC_REG(port, RX_LED_TST), LED_T_ON); + skge_write32(hw, SKGEMAC_REG(port, RX_LED_VAL), 100); + skge_write8(hw, SKGEMAC_REG(port, RX_LED_CTRL), LED_START); + + switch (hw->phy_type) { + case SK_PHY_BCOM: + skge_xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, + PHY_B_PEC_LED_ON); + break; + case SK_PHY_LONE: + skge_xm_phy_write(hw, port, PHY_LONE_LED_CFG, + 0x0800); + break; + default: + skge_write8(hw, SKGEMAC_REG(port, TX_LED_TST), LED_T_ON); + skge_write32(hw, SKGEMAC_REG(port, TX_LED_VAL), 100); + skge_write8(hw, SKGEMAC_REG(port, TX_LED_CTRL), LED_START); + } + } else { + skge_gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0); + skge_gm_phy_write(hw, port, PHY_MARV_LED_OVER, + PHY_M_LED_MO_DUP(MO_LED_ON) | + PHY_M_LED_MO_10(MO_LED_ON) | + PHY_M_LED_MO_100(MO_LED_ON) | + PHY_M_LED_MO_1000(MO_LED_ON) | + PHY_M_LED_MO_RX(MO_LED_ON)); + } +} + +static void skge_led_off(struct skge_hw *hw, int port) +{ + if (hw->chip_id == CHIP_ID_GENESIS) { + skge_write8(hw, SKGEMAC_REG(port, LNK_LED_REG), LINKLED_OFF); + skge_write8(hw, B0_LED, LED_STAT_OFF); + + skge_write32(hw, SKGEMAC_REG(port, RX_LED_VAL), 0); + skge_write8(hw, SKGEMAC_REG(port, RX_LED_CTRL), LED_T_OFF); + + switch (hw->phy_type) { + case SK_PHY_BCOM: + skge_xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, + PHY_B_PEC_LED_OFF); + break; + case SK_PHY_LONE: + skge_xm_phy_write(hw, port, PHY_LONE_LED_CFG, + PHY_L_LC_LEDT); + break; + default: + skge_write32(hw, SKGEMAC_REG(port, TX_LED_VAL), 0); + skge_write8(hw, SKGEMAC_REG(port, TX_LED_CTRL), LED_T_OFF); + } + } else { + skge_gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0); + skge_gm_phy_write(hw, port, PHY_MARV_LED_OVER, + PHY_M_LED_MO_DUP(MO_LED_OFF) | + PHY_M_LED_MO_10(MO_LED_OFF) | + PHY_M_LED_MO_100(MO_LED_OFF) | + PHY_M_LED_MO_1000(MO_LED_OFF) | + PHY_M_LED_MO_RX(MO_LED_OFF)); + } +} + +static void skge_blink_timer(unsigned long data) +{ + struct skge_port *skge = (struct skge_port *) data; + struct skge_hw *hw = skge->hw; + unsigned long flags; + + spin_lock_irqsave(&hw->phy_lock, flags); + if (skge->blink_on) + skge_led_on(hw, skge->port); + else + skge_led_off(hw, skge->port); + spin_unlock_irqrestore(&hw->phy_lock, flags); + + skge->blink_on = !skge->blink_on; + mod_timer(&skge->led_blink, jiffies + BLINK_HZ); +} + +/* blink LED's for finding board */ +static int skge_phys_id(struct net_device *dev, u32 data) +{ + struct skge_port *skge = netdev_priv(dev); + + if(!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ)) + data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ); + + /* start blinking */ + skge->blink_on = 1; + mod_timer(&skge->led_blink, jiffies+1); + + msleep_interruptible(data * 1000); + del_timer_sync(&skge->led_blink); + + skge_led_off(skge->hw, skge->port); + + return 0; +} + +static struct ethtool_ops skge_ethtool_ops = { + .get_settings = skge_get_settings, + .set_settings = skge_set_settings, + .get_drvinfo = skge_get_drvinfo, + .get_regs_len = skge_get_regs_len, + .get_regs = skge_get_regs, + .get_wol = skge_get_wol, + .set_wol = skge_set_wol, + .get_msglevel = skge_get_msglevel, + .set_msglevel = skge_set_msglevel, + .nway_reset = skge_nway_reset, + .get_link = ethtool_op_get_link, + .get_ringparam = skge_get_ring_param, + .set_ringparam = skge_set_ring_param, + .get_pauseparam = skge_get_pauseparam, + .set_pauseparam = skge_set_pauseparam, + .get_coalesce = skge_get_coalesce, + .set_coalesce = skge_set_coalesce, + .get_tso = ethtool_op_get_tso, + .set_tso = skge_set_tso, + .get_sg = ethtool_op_get_sg, + .set_sg = skge_set_sg, + .get_tx_csum = ethtool_op_get_tx_csum, + .set_tx_csum = skge_set_tx_csum, + .get_rx_csum = skge_get_rx_csum, + .set_rx_csum = skge_set_rx_csum, + .get_strings = skge_get_strings, + .phys_id = skge_phys_id, + .get_stats_count = skge_get_stats_count, + .get_ethtool_stats = skge_get_ethtool_stats, +}; + +/* + * Allocate ring elements and chain them together + * One-to-one association of board descriptors with ring elements + */ +static int skge_ring_alloc(struct skge_ring *ring, void *vaddr, u64 base) +{ + struct skge_tx_desc *d; + struct skge_element *e; + int i; + + ring->start = kmalloc(sizeof(*e)*ring->count, GFP_KERNEL); + if (!ring->start) + return -ENOMEM; + + for (i = 0, e = ring->start, d = vaddr; i < ring->count; i++, e++, d++) { + e->desc = d; + if (i == ring->count - 1) { + e->next = ring->start; + d->next_offset = base; + } else { + e->next = e + 1; + d->next_offset = base + (i+1) * sizeof(*d); + } + } + ring->to_use = ring->to_clean = ring->start; + + return 0; +} + +/* Setup buffer for receiving */ +static inline int skge_rx_alloc(struct skge_port *skge, + struct skge_element *e) +{ + unsigned long bufsize = skge->netdev->mtu + ETH_HLEN; /* VLAN? */ + struct skge_rx_desc *rd = e->desc; + struct sk_buff *skb; + u64 map; + + skb = dev_alloc_skb(bufsize + NET_IP_ALIGN); + if (unlikely(!skb)) { + printk(KERN_DEBUG PFX "%s: out of memory for receive\n", + skge->netdev->name); + return -ENOMEM; + } + + skb->dev = skge->netdev; + skb_reserve(skb, NET_IP_ALIGN); + + map = pci_map_single(skge->hw->pdev, skb->data, bufsize, + PCI_DMA_FROMDEVICE); + + rd->dma_lo = map; + rd->dma_hi = map >> 32; + e->skb = skb; + rd->csum1_start = ETH_HLEN; + rd->csum2_start = ETH_HLEN; + rd->csum1 = 0; + rd->csum2 = 0; + + wmb(); + + rd->control = BMU_OWN | BMU_STF | BMU_IRQ_EOF | BMU_TCP_CHECK | bufsize; + pci_unmap_addr_set(e, mapaddr, map); + pci_unmap_len_set(e, maplen, bufsize); + return 0; +} + +/* Free all unused buffers in receive ring, assumes receiver stopped */ +static void skge_rx_clean(struct skge_port *skge) +{ + struct skge_hw *hw = skge->hw; + struct skge_ring *ring = &skge->rx_ring; + struct skge_element *e; + + for (e = ring->to_clean; e != ring->to_use; e = e->next) { + struct skge_rx_desc *rd = e->desc; + rd->control = 0; + + pci_unmap_single(hw->pdev, + pci_unmap_addr(e, mapaddr), + pci_unmap_len(e, maplen), + PCI_DMA_FROMDEVICE); + dev_kfree_skb(e->skb); + e->skb = NULL; + } + ring->to_clean = e; +} + +/* Allocate buffers for receive ring + * For receive: to_use is refill location + * to_clean is next received frame. + * + * if (to_use == to_clean) + * then ring all frames in ring need buffers + * if (to_use->next == to_clean) + * then ring all frames in ring have buffers + */ +static int skge_rx_fill(struct skge_port *skge) +{ + struct skge_ring *ring = &skge->rx_ring; + struct skge_element *e; + int ret = 0; + + for (e = ring->to_use; e->next != ring->to_clean; e = e->next) { + if (skge_rx_alloc(skge, e)) { + ret = 1; + break; + } + + } + ring->to_use = e; + + return ret; +} + +static void skge_link_up(struct skge_port *skge) +{ + netif_carrier_on(skge->netdev); + if (skge->tx_avail > MAX_SKB_FRAGS + 1) + netif_wake_queue(skge->netdev); + + if (netif_msg_link(skge)) + printk(KERN_INFO PFX + "%s: Link is up at %d Mbps, %s duplex, flow control %s\n", + skge->netdev->name, skge->speed, + skge->duplex == DUPLEX_FULL ? "full" : "half", + (skge->flow_control == FLOW_MODE_NONE) ? "none" : + (skge->flow_control == FLOW_MODE_LOC_SEND) ? "tx only" : + (skge->flow_control == FLOW_MODE_REM_SEND) ? "rx only" : + (skge->flow_control == FLOW_MODE_SYMMETRIC) ? "tx and rx" : + "unknown"); +} + +static void skge_link_down(struct skge_port *skge) +{ + netif_carrier_off(skge->netdev); + netif_stop_queue(skge->netdev); + + if (netif_msg_link(skge)) + printk(KERN_INFO PFX "%s: Link is down.\n", skge->netdev->name); +} + +static u16 skge_xm_phy_read(struct skge_hw *hw, int port, u16 reg) +{ + int i; + u16 v; + + skge_xm_write16(hw, port, XM_PHY_ADDR, reg | hw->phy_addr); + v = skge_xm_read16(hw, port, XM_PHY_DATA); + if (hw->phy_type != SK_PHY_XMAC) { + for (i = 0; i < PHY_RETRIES; i++) { + udelay(1); + if (skge_xm_read16(hw, port, XM_MMU_CMD) + & XM_MMU_PHY_RDY) + goto ready; + } + + printk(KERN_WARNING PFX "%s: phy read timed out\n", + hw->dev[port]->name); + return 0; + ready: + v = skge_xm_read16(hw, port, XM_PHY_DATA); + } + + return v; +} + +static void skge_xm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val) +{ + int i; + + skge_xm_write16(hw, port, XM_PHY_ADDR, reg | hw->phy_addr); + for (i = 0; i < PHY_RETRIES; i++) { + if (!(skge_xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_BUSY)) + goto ready; + cpu_relax(); + } + printk(KERN_WARNING PFX "%s: phy write failed to come ready\n", + hw->dev[port]->name); + + + ready: + skge_xm_write16(hw, port, XM_PHY_DATA, val); + for (i = 0; i < PHY_RETRIES; i++) { + udelay(1); + if (!(skge_xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_BUSY)) + return; + } + printk(KERN_WARNING PFX "%s: phy write timed out\n", + hw->dev[port]->name); +} + +static void genesis_init(struct skge_hw *hw) +{ + /* set blink source counter */ + skge_write32(hw, B2_BSC_INI, (SK_BLK_DUR * SK_FACT_53) / 100); + skge_write8(hw, B2_BSC_CTRL, BSC_START); + + /* configure mac arbiter */ + skge_write16(hw, B3_MA_TO_CTRL, MA_RST_CLR); + + /* configure mac arbiter timeout values */ + skge_write8(hw, B3_MA_TOINI_RX1, SK_MAC_TO_53); + skge_write8(hw, B3_MA_TOINI_RX2, SK_MAC_TO_53); + skge_write8(hw, B3_MA_TOINI_TX1, SK_MAC_TO_53); + skge_write8(hw, B3_MA_TOINI_TX2, SK_MAC_TO_53); + + skge_write8(hw, B3_MA_RCINI_RX1, 0); + skge_write8(hw, B3_MA_RCINI_RX2, 0); + skge_write8(hw, B3_MA_RCINI_TX1, 0); + skge_write8(hw, B3_MA_RCINI_TX2, 0); + + /* configure packet arbiter timeout */ + skge_write16(hw, B3_PA_CTRL, PA_RST_CLR); + skge_write16(hw, B3_PA_TOINI_RX1, SK_PKT_TO_MAX); + skge_write16(hw, B3_PA_TOINI_TX1, SK_PKT_TO_MAX); + skge_write16(hw, B3_PA_TOINI_RX2, SK_PKT_TO_MAX); + skge_write16(hw, B3_PA_TOINI_TX2, SK_PKT_TO_MAX); +} + +static void genesis_reset(struct skge_hw *hw, int port) +{ + int i; + u64 zero = 0; + + /* reset the statistics module */ + skge_xm_write32(hw, port, XM_GP_PORT, XM_GP_RES_STAT); + skge_xm_write16(hw, port, XM_IMSK, 0xffff); /* disable XMAC IRQs */ + skge_xm_write32(hw, port, XM_MODE, 0); /* clear Mode Reg */ + skge_xm_write16(hw, port, XM_TX_CMD, 0); /* reset TX CMD Reg */ + skge_xm_write16(hw, port, XM_RX_CMD, 0); /* reset RX CMD Reg */ + + /* disable all PHY IRQs */ + if (hw->phy_type == SK_PHY_BCOM) + skge_xm_write16(hw, port, PHY_BCOM_INT_MASK, 0xffff); + + skge_xm_outhash(hw, port, XM_HSM, (u8 *) &zero); + for (i = 0; i < 15; i++) + skge_xm_outaddr(hw, port, XM_EXM(i), (u8 *) &zero); + skge_xm_outhash(hw, port, XM_SRC_CHK, (u8 *) &zero); +} + + +static void genesis_mac_init(struct skge_hw *hw, int port) +{ + struct skge_port *skge = netdev_priv(hw->dev[port]); + int i; + u32 r; + u16 id1; + u16 ctrl1, ctrl2, ctrl3, ctrl4, ctrl5; + + /* magic workaround patterns for Broadcom */ + static const struct { + u16 reg; + u16 val; + } A1hack[] = { + { 0x18, 0x0c20 }, { 0x17, 0x0012 }, { 0x15, 0x1104 }, + { 0x17, 0x0013 }, { 0x15, 0x0404 }, { 0x17, 0x8006 }, + { 0x15, 0x0132 }, { 0x17, 0x8006 }, { 0x15, 0x0232 }, + { 0x17, 0x800D }, { 0x15, 0x000F }, { 0x18, 0x0420 }, + }, C0hack[] = { + { 0x18, 0x0c20 }, { 0x17, 0x0012 }, { 0x15, 0x1204 }, + { 0x17, 0x0013 }, { 0x15, 0x0A04 }, { 0x18, 0x0420 }, + }; + + + /* initialize Rx, Tx and Link LED */ + skge_write8(hw, SKGEMAC_REG(port, LNK_LED_REG), LINKLED_ON); + skge_write8(hw, SKGEMAC_REG(port, LNK_LED_REG), LINKLED_LINKSYNC_ON); + + skge_write8(hw, SKGEMAC_REG(port, RX_LED_CTRL), LED_START); + skge_write8(hw, SKGEMAC_REG(port, TX_LED_CTRL), LED_START); + + /* Unreset the XMAC. */ + skge_write16(hw, SKGEMAC_REG(port, TX_MFF_CTRL1), MFF_CLR_MAC_RST); + + /* + * Perform additional initialization for external PHYs, + * namely for the 1000baseTX cards that use the XMAC's + * GMII mode. + */ + spin_lock_bh(&hw->phy_lock); + if (hw->phy_type != SK_PHY_XMAC) { + /* Take PHY out of reset. */ + r = skge_read32(hw, B2_GP_IO); + if (port == 0) + r |= GP_DIR_0|GP_IO_0; + else + r |= GP_DIR_2|GP_IO_2; + + skge_write32(hw, B2_GP_IO, r); + skge_read32(hw, B2_GP_IO); + + /* Enable GMII mode on the XMAC. */ + skge_xm_write16(hw, port, XM_HW_CFG, XM_HW_GMII_MD); + + id1 = skge_xm_phy_read(hw, port, PHY_XMAC_ID1); + + /* Optimize MDIO transfer by suppressing preamble. */ + skge_xm_write16(hw, port, XM_MMU_CMD, + skge_xm_read16(hw, port, XM_MMU_CMD) + | XM_MMU_NO_PRE); + + if (id1 == PHY_BCOM_ID1_C0) { + /* + * Workaround BCOM Errata for the C0 type. + * Write magic patterns to reserved registers. + */ + for (i = 0; i < ARRAY_SIZE(C0hack); i++) + skge_xm_phy_write(hw, port, + C0hack[i].reg, C0hack[i].val); + + } else if (id1 == PHY_BCOM_ID1_A1) { + /* + * Workaround BCOM Errata for the A1 type. + * Write magic patterns to reserved registers. + */ + for (i = 0; i < ARRAY_SIZE(A1hack); i++) + skge_xm_phy_write(hw, port, + A1hack[i].reg, A1hack[i].val); + } + + /* + * Workaround BCOM Errata (#10523) for all BCom PHYs. + * Disable Power Management after reset. + */ + r = skge_xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL); + skge_xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL, r | PHY_B_AC_DIS_PM); + } + + /* Dummy read */ + skge_xm_read16(hw, port, XM_ISRC); + + r = skge_xm_read32(hw, port, XM_MODE); + skge_xm_write32(hw, port, XM_MODE, r|XM_MD_CSA); + + /* We don't need the FCS appended to the packet. */ + r = skge_xm_read16(hw, port, XM_RX_CMD); + skge_xm_write16(hw, port, XM_RX_CMD, r | XM_RX_STRIP_FCS); + + /* We want short frames padded to 60 bytes. */ + r = skge_xm_read16(hw, port, XM_TX_CMD); + skge_xm_write16(hw, port, XM_TX_CMD, r | XM_TX_AUTO_PAD); + + /* + * Enable the reception of all error frames. This is is + * a necessary evil due to the design of the XMAC. The + * XMAC's receive FIFO is only 8K in size, however jumbo + * frames can be up to 9000 bytes in length. When bad + * frame filtering is enabled, the XMAC's RX FIFO operates + * in 'store and forward' mode. For this to work, the + * entire frame has to fit into the FIFO, but that means + * that jumbo frames larger than 8192 bytes will be + * truncated. Disabling all bad frame filtering causes + * the RX FIFO to operate in streaming mode, in which + * case the XMAC will start transfering frames out of the + * RX FIFO as soon as the FIFO threshold is reached. + */ + r = skge_xm_read32(hw, port, XM_MODE); + skge_xm_write32(hw, port, XM_MODE, + XM_MD_RX_CRCE|XM_MD_RX_LONG|XM_MD_RX_RUNT| + XM_MD_RX_ERR|XM_MD_RX_IRLE); + + skge_xm_outaddr(hw, port, XM_SA, hw->dev[port]->dev_addr); + skge_xm_outaddr(hw, port, XM_EXM(0), hw->dev[port]->dev_addr); + + /* + * Bump up the transmit threshold. This helps hold off transmit + * underruns when we're blasting traffic from both ports at once. + */ + skge_xm_write16(hw, port, XM_TX_THR, 512); + + /* Configure MAC arbiter */ + skge_write16(hw, B3_MA_TO_CTRL, MA_RST_CLR); + + /* configure timeout values */ + skge_write8(hw, B3_MA_TOINI_RX1, 72); + skge_write8(hw, B3_MA_TOINI_RX2, 72); + skge_write8(hw, B3_MA_TOINI_TX1, 72); + skge_write8(hw, B3_MA_TOINI_TX2, 72); + + skge_write8(hw, B3_MA_RCINI_RX1, 0); + skge_write8(hw, B3_MA_RCINI_RX2, 0); + skge_write8(hw, B3_MA_RCINI_TX1, 0); + skge_write8(hw, B3_MA_RCINI_TX2, 0); + + /* Configure Rx MAC FIFO */ + skge_write8(hw, SKGEMAC_REG(port, RX_MFF_CTRL2), MFF_RST_CLR); + skge_write16(hw, SKGEMAC_REG(port, RX_MFF_CTRL1), MFF_ENA_TIM_PAT); + skge_write8(hw, SKGEMAC_REG(port, RX_MFF_CTRL2), MFF_ENA_OP_MD); + + /* Configure Tx MAC FIFO */ + skge_write8(hw, SKGEMAC_REG(port, TX_MFF_CTRL2), MFF_RST_CLR); + skge_write16(hw, SKGEMAC_REG(port, TX_MFF_CTRL1), MFF_TX_CTRL_DEF); + skge_write8(hw, SKGEMAC_REG(port, TX_MFF_CTRL2), MFF_ENA_OP_MD); + + if (hw->dev[port]->mtu > ETH_DATA_LEN) { + /* Enable frame flushing if jumbo frames used */ + skge_write16(hw, SKGEMAC_REG(port,RX_MFF_CTRL1), MFF_ENA_FLUSH); + } else { + /* enable timeout timers if normal frames */ + skge_write16(hw, B3_PA_CTRL, + port == 0 ? PA_ENA_TO_TX1 : PA_ENA_TO_TX2); + } + + + r = skge_xm_read16(hw, port, XM_RX_CMD); + if (hw->dev[port]->mtu > ETH_DATA_LEN) + skge_xm_write16(hw, port, XM_RX_CMD, r | XM_RX_BIG_PK_OK); + else + skge_xm_write16(hw, port, XM_RX_CMD, r & ~(XM_RX_BIG_PK_OK)); + + switch (hw->phy_type) { + case SK_PHY_XMAC: + if (skge->autoneg == AUTONEG_ENABLE) { + ctrl1 = PHY_X_AN_FD | PHY_X_AN_HD; + + switch (skge->flow_control) { + case FLOW_MODE_NONE: + ctrl1 |= PHY_X_P_NO_PAUSE; + break; + case FLOW_MODE_LOC_SEND: + ctrl1 |= PHY_X_P_ASYM_MD; + break; + case FLOW_MODE_SYMMETRIC: + ctrl1 |= PHY_X_P_SYM_MD; + break; + case FLOW_MODE_REM_SEND: + ctrl1 |= PHY_X_P_BOTH_MD; + break; + } + + skge_xm_phy_write(hw, port, PHY_XMAC_AUNE_ADV, ctrl1); + ctrl2 = PHY_CT_ANE | PHY_CT_RE_CFG; + } else { + ctrl2 = 0; + if (skge->duplex == DUPLEX_FULL) + ctrl2 |= PHY_CT_DUP_MD; + } + + skge_xm_phy_write(hw, port, PHY_XMAC_CTRL, ctrl2); + break; + + case SK_PHY_BCOM: + ctrl1 = PHY_CT_SP1000; + ctrl2 = 0; + ctrl3 = PHY_SEL_TYPE; + ctrl4 = PHY_B_PEC_EN_LTR; + ctrl5 = PHY_B_AC_TX_TST; + + if (skge->autoneg == AUTONEG_ENABLE) { + /* + * Workaround BCOM Errata #1 for the C5 type. + * 1000Base-T Link Acquisition Failure in Slave Mode + * Set Repeater/DTE bit 10 of the 1000Base-T Control Register + */ + ctrl2 |= PHY_B_1000C_RD; + if (skge->advertising & ADVERTISED_1000baseT_Half) + ctrl2 |= PHY_B_1000C_AHD; + if (skge->advertising & ADVERTISED_1000baseT_Full) + ctrl2 |= PHY_B_1000C_AFD; + + /* Set Flow-control capabilities */ + switch (skge->flow_control) { + case FLOW_MODE_NONE: + ctrl3 |= PHY_B_P_NO_PAUSE; + break; + case FLOW_MODE_LOC_SEND: + ctrl3 |= PHY_B_P_ASYM_MD; + break; + case FLOW_MODE_SYMMETRIC: + ctrl3 |= PHY_B_P_SYM_MD; + break; + case FLOW_MODE_REM_SEND: + ctrl3 |= PHY_B_P_BOTH_MD; + break; + } + + /* Restart Auto-negotiation */ + ctrl1 |= PHY_CT_ANE | PHY_CT_RE_CFG; + } else { + if (skge->duplex == DUPLEX_FULL) + ctrl1 |= PHY_CT_DUP_MD; + + ctrl2 |= PHY_B_1000C_MSE; /* set it to Slave */ + } + + skge_xm_phy_write(hw, port, PHY_BCOM_1000T_CTRL, ctrl2); + skge_xm_phy_write(hw, port, PHY_BCOM_AUNE_ADV, ctrl3); + + if (skge->netdev->mtu > ETH_DATA_LEN) { + ctrl4 |= PHY_B_PEC_HIGH_LA; + ctrl5 |= PHY_B_AC_LONG_PACK; + + skge_xm_phy_write(hw, port,PHY_BCOM_AUX_CTRL, ctrl5); + } + + skge_xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, ctrl4); + skge_xm_phy_write(hw, port, PHY_BCOM_CTRL, ctrl1); + break; + } + spin_unlock_bh(&hw->phy_lock); + + /* Clear MIB counters */ + skge_xm_write16(hw, port, XM_STAT_CMD, + XM_SC_CLR_RXC | XM_SC_CLR_TXC); + /* Clear two times according to Errata #3 */ + skge_xm_write16(hw, port, XM_STAT_CMD, + XM_SC_CLR_RXC | XM_SC_CLR_TXC); + + /* Start polling for link status */ + mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ); +} + +static void genesis_stop(struct skge_port *skge) +{ + struct skge_hw *hw = skge->hw; + int port = skge->port; + + /* Clear Tx packet arbiter timeout IRQ */ + skge_write16(hw, B3_PA_CTRL, + port == 0 ? PA_CLR_TO_TX1 : PA_CLR_TO_TX2); + + /* + * If the transfer stucks at the MAC the STOP command will not + * terminate if we don't flush the XMAC's transmit FIFO ! + */ + skge_xm_write32(hw, port, XM_MODE, + skge_xm_read32(hw, port, XM_MODE)|XM_MD_FTF); + + + /* Reset the MAC */ + skge_write16(hw, SKGEMAC_REG(port, TX_MFF_CTRL1), MFF_SET_MAC_RST); + + /* For external PHYs there must be special handling */ + if (hw->phy_type != SK_PHY_XMAC) { + u32 reg = skge_read32(hw, B2_GP_IO); + + if (port == 0) { + reg |= GP_DIR_0; + reg &= ~GP_IO_0; + } else { + reg |= GP_DIR_2; + reg &= ~GP_IO_2; + } + skge_write32(hw, B2_GP_IO, reg); + skge_read32(hw, B2_GP_IO); + } + + skge_xm_write16(hw, port, XM_MMU_CMD, + skge_xm_read16(hw, port, XM_MMU_CMD) + & ~(XM_MMU_ENA_RX | XM_MMU_ENA_TX)); + + skge_xm_read16(hw, port, XM_MMU_CMD); +} + + +static void genesis_get_stats(struct skge_port *skge, u64 *data) +{ + struct skge_hw *hw = skge->hw; + int port = skge->port; + int i; + unsigned long timeout = jiffies + HZ; + + skge_xm_write16(hw, port, + XM_STAT_CMD, XM_SC_SNP_TXC | XM_SC_SNP_RXC); + + /* wait for update to complete */ + while (skge_xm_read16(hw, port, XM_STAT_CMD) + & (XM_SC_SNP_TXC | XM_SC_SNP_RXC)) { + if (time_after(jiffies, timeout)) + break; + udelay(10); + } + + /* special case for 64 bit octet counter */ + data[0] = (u64) skge_xm_read32(hw, port, XM_TXO_OK_HI) << 32 + | skge_xm_read32(hw, port, XM_TXO_OK_LO); + data[1] = (u64) skge_xm_read32(hw, port, XM_RXO_OK_HI) << 32 + | skge_xm_read32(hw, port, XM_RXO_OK_LO); + + for (i = 2; i < ARRAY_SIZE(skge_stats); i++) + data[i] = skge_xm_read32(hw, port, skge_stats[i].xmac_offset); +} + +static void genesis_mac_intr(struct skge_hw *hw, int port) +{ + struct skge_port *skge = netdev_priv(hw->dev[port]); + u16 status = skge_xm_read16(hw, port, XM_ISRC); + + pr_debug("genesis_intr status %x\n", status); + if (hw->phy_type == SK_PHY_XMAC) { + /* LInk down, start polling for state change */ + if (status & XM_IS_INP_ASS) { + skge_xm_write16(hw, port, XM_IMSK, + skge_xm_read16(hw, port, XM_IMSK) | XM_IS_INP_ASS); + mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ); + } + else if (status & XM_IS_AND) + mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ); + } + + if (status & XM_IS_TXF_UR) { + skge_xm_write32(hw, port, XM_MODE, XM_MD_FTF); + ++skge->net_stats.tx_fifo_errors; + } + if (status & XM_IS_RXF_OV) { + skge_xm_write32(hw, port, XM_MODE, XM_MD_FRF); + ++skge->net_stats.rx_fifo_errors; + } +} + +static void skge_gm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val) +{ + int i; + + skge_gma_write16(hw, port, GM_SMI_DATA, val); + skge_gma_write16(hw, port, GM_SMI_CTRL, + GM_SMI_CT_PHY_AD(hw->phy_addr) | GM_SMI_CT_REG_AD(reg)); + for (i = 0; i < PHY_RETRIES; i++) { + udelay(1); + + if (!(skge_gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_BUSY)) + break; + } +} + +static u16 skge_gm_phy_read(struct skge_hw *hw, int port, u16 reg) +{ + int i; + + skge_gma_write16(hw, port, GM_SMI_CTRL, + GM_SMI_CT_PHY_AD(hw->phy_addr) + | GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD); + + for (i = 0; i < PHY_RETRIES; i++) { + udelay(1); + if (skge_gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_RD_VAL) + goto ready; + } + + printk(KERN_WARNING PFX "%s: phy read timeout\n", + hw->dev[port]->name); + return 0; + ready: + return skge_gma_read16(hw, port, GM_SMI_DATA); +} + +static void genesis_link_down(struct skge_port *skge) +{ + struct skge_hw *hw = skge->hw; + int port = skge->port; + + pr_debug("genesis_link_down\n"); + + skge_xm_write16(hw, port, XM_MMU_CMD, + skge_xm_read16(hw, port, XM_MMU_CMD) + & ~(XM_MMU_ENA_RX | XM_MMU_ENA_TX)); + + /* dummy read to ensure writing */ + (void) skge_xm_read16(hw, port, XM_MMU_CMD); + + skge_link_down(skge); +} + +static void genesis_link_up(struct skge_port *skge) +{ + struct skge_hw *hw = skge->hw; + int port = skge->port; + u16 cmd; + u32 mode, msk; + + pr_debug("genesis_link_up\n"); + cmd = skge_xm_read16(hw, port, XM_MMU_CMD); + + /* + * enabling pause frame reception is required for 1000BT + * because the XMAC is not reset if the link is going down + */ + if (skge->flow_control == FLOW_MODE_NONE || + skge->flow_control == FLOW_MODE_LOC_SEND) + cmd |= XM_MMU_IGN_PF; + else + /* Enable Pause Frame Reception */ + cmd &= ~XM_MMU_IGN_PF; + + skge_xm_write16(hw, port, XM_MMU_CMD, cmd); + + mode = skge_xm_read32(hw, port, XM_MODE); + if (skge->flow_control == FLOW_MODE_SYMMETRIC || + skge->flow_control == FLOW_MODE_LOC_SEND) { + /* + * Configure Pause Frame Generation + * Use internal and external Pause Frame Generation. + * Sending pause frames is edge triggered. + * Send a Pause frame with the maximum pause time if + * internal oder external FIFO full condition occurs. + * Send a zero pause time frame to re-start transmission. + */ + /* XM_PAUSE_DA = '010000C28001' (default) */ + /* XM_MAC_PTIME = 0xffff (maximum) */ + /* remember this value is defined in big endian (!) */ + skge_xm_write16(hw, port, XM_MAC_PTIME, 0xffff); + + mode |= XM_PAUSE_MODE; + skge_write16(hw, SKGEMAC_REG(port, RX_MFF_CTRL1), MFF_ENA_PAUSE); + } else { + /* + * disable pause frame generation is required for 1000BT + * because the XMAC is not reset if the link is going down + */ + /* Disable Pause Mode in Mode Register */ + mode &= ~XM_PAUSE_MODE; + + skge_write16(hw, SKGEMAC_REG(port, RX_MFF_CTRL1), MFF_DIS_PAUSE); + } + + skge_xm_write32(hw, port, XM_MODE, mode); + + msk = XM_DEF_MSK; + if (hw->phy_type != SK_PHY_XMAC) + msk |= XM_IS_INP_ASS; /* disable GP0 interrupt bit */ + + skge_xm_write16(hw, port, XM_IMSK, msk); + skge_xm_read16(hw, port, XM_ISRC); + + /* get MMU Command Reg. */ + cmd = skge_xm_read16(hw, port, XM_MMU_CMD); + if (hw->phy_type != SK_PHY_XMAC && skge->duplex == DUPLEX_FULL) + cmd |= XM_MMU_GMII_FD; + + if (hw->phy_type == SK_PHY_BCOM) { + /* + * Workaround BCOM Errata (#10523) for all BCom Phys + * Enable Power Management after link up + */ + skge_xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL, + skge_xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL) + & ~PHY_B_AC_DIS_PM); + skge_xm_phy_write(hw, port, PHY_BCOM_INT_MASK, + PHY_B_DEF_MSK); + } + + /* enable Rx/Tx */ + skge_xm_write16(hw, port, XM_MMU_CMD, + cmd | XM_MMU_ENA_RX | XM_MMU_ENA_TX); + skge_link_up(skge); +} + + +static void genesis_bcom_intr(struct skge_port *skge) +{ + struct skge_hw *hw = skge->hw; + int port = skge->port; + u16 stat = skge_xm_phy_read(hw, port, PHY_BCOM_INT_STAT); + + pr_debug("genesis_bcom intr stat=%x\n", stat); + + /* Workaround BCom Errata: + * enable and disable loopback mode if "NO HCD" occurs. + */ + if (stat & PHY_B_IS_NO_HDCL) { + u16 ctrl = skge_xm_phy_read(hw, port, PHY_BCOM_CTRL); + skge_xm_phy_write(hw, port, PHY_BCOM_CTRL, + ctrl | PHY_CT_LOOP); + skge_xm_phy_write(hw, port, PHY_BCOM_CTRL, + ctrl & ~PHY_CT_LOOP); + } + + stat = skge_xm_phy_read(hw, port, PHY_BCOM_STAT); + if (stat & (PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE)) { + u16 aux = skge_xm_phy_read(hw, port, PHY_BCOM_AUX_STAT); + if ( !(aux & PHY_B_AS_LS) && netif_carrier_ok(skge->netdev)) + genesis_link_down(skge); + + else if (stat & PHY_B_IS_LST_CHANGE) { + if (aux & PHY_B_AS_AN_C) { + switch (aux & PHY_B_AS_AN_RES_MSK) { + case PHY_B_RES_1000FD: + skge->duplex = DUPLEX_FULL; + break; + case PHY_B_RES_1000HD: + skge->duplex = DUPLEX_HALF; + break; + } + + switch (aux & PHY_B_AS_PAUSE_MSK) { + case PHY_B_AS_PAUSE_MSK: + skge->flow_control = FLOW_MODE_SYMMETRIC; + break; + case PHY_B_AS_PRR: + skge->flow_control = FLOW_MODE_REM_SEND; + break; + case PHY_B_AS_PRT: + skge->flow_control = FLOW_MODE_LOC_SEND; + break; + default: + skge->flow_control = FLOW_MODE_NONE; + } + skge->speed = SPEED_1000; + } + genesis_link_up(skge); + } + else + mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ); + } +} + +/* Perodic poll of phy status to check for link transistion */ +static void skge_link_timer(unsigned long __arg) +{ + struct skge_port *skge = (struct skge_port *) __arg; + struct skge_hw *hw = skge->hw; + int port = skge->port; + + if (hw->chip_id != CHIP_ID_GENESIS || !netif_running(skge->netdev)) + return; + + spin_lock_bh(&hw->phy_lock); + if (hw->phy_type == SK_PHY_BCOM) + genesis_bcom_intr(skge); + else { + int i; + for (i = 0; i < 3; i++) + if (skge_xm_read16(hw, port, XM_ISRC) & XM_IS_INP_ASS) + break; + + if (i == 3) + mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ); + else + genesis_link_up(skge); + } + spin_unlock_bh(&hw->phy_lock); +} + +/* Marvell Phy Initailization */ +static void yukon_init(struct skge_hw *hw, int port) +{ + struct skge_port *skge = netdev_priv(hw->dev[port]); + u16 ctrl, ct1000, adv; + u16 ledctrl, ledover; + + pr_debug("yukon_init\n"); + if (skge->autoneg == AUTONEG_ENABLE) { + u16 ectrl = skge_gm_phy_read(hw, port, PHY_MARV_EXT_CTRL); + + ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK | + PHY_M_EC_MAC_S_MSK); + ectrl |= PHY_M_EC_MAC_S(MAC_TX_CLK_25_MHZ); + + /* on PHY 88E1111 there is a change for downshift control */ + if (hw->chip_id == CHIP_ID_YUKON_EC) + ectrl |= PHY_M_EC_M_DSC_2(0) | PHY_M_EC_DOWN_S_ENA; + else + ectrl |= PHY_M_EC_M_DSC(0) | PHY_M_EC_S_DSC(1); + + skge_gm_phy_write(hw, port, PHY_MARV_EXT_CTRL, ectrl); + } + + ctrl = skge_gm_phy_read(hw, port, PHY_MARV_CTRL); + if (skge->autoneg == AUTONEG_DISABLE) + ctrl &= ~PHY_CT_ANE; + + ctrl |= PHY_CT_RESET; + skge_gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl); + + ctrl = 0; + ct1000 = 0; + adv = PHY_SEL_TYPE; + + if (skge->autoneg == AUTONEG_ENABLE) { + if (iscopper(hw)) { + if (skge->advertising & ADVERTISED_1000baseT_Full) + ct1000 |= PHY_M_1000C_AFD; + if (skge->advertising & ADVERTISED_1000baseT_Half) + ct1000 |= PHY_M_1000C_AHD; + if (skge->advertising & ADVERTISED_100baseT_Full) + adv |= PHY_M_AN_100_FD; + if (skge->advertising & ADVERTISED_100baseT_Half) + adv |= PHY_M_AN_100_HD; + if (skge->advertising & ADVERTISED_10baseT_Full) + adv |= PHY_M_AN_10_FD; + if (skge->advertising & ADVERTISED_10baseT_Half) + adv |= PHY_M_AN_10_HD; + + /* Set Flow-control capabilities */ + switch (skge->flow_control) { + case FLOW_MODE_NONE: + adv |= PHY_B_P_NO_PAUSE; + break; + case FLOW_MODE_LOC_SEND: + adv |= PHY_B_P_ASYM_MD; + break; + case FLOW_MODE_SYMMETRIC: + adv |= PHY_B_P_SYM_MD; + break; + case FLOW_MODE_REM_SEND: + adv |= PHY_B_P_BOTH_MD; + break; + } + } else { /* special defines for FIBER (88E1011S only) */ + adv |= PHY_M_AN_1000X_AHD | PHY_M_AN_1000X_AFD; + + /* Set Flow-control capabilities */ + switch (skge->flow_control) { + case FLOW_MODE_NONE: + adv |= PHY_M_P_NO_PAUSE_X; + break; + case FLOW_MODE_LOC_SEND: + adv |= PHY_M_P_ASYM_MD_X; + break; + case FLOW_MODE_SYMMETRIC: + adv |= PHY_M_P_SYM_MD_X; + break; + case FLOW_MODE_REM_SEND: + adv |= PHY_M_P_BOTH_MD_X; + break; + } + } + /* Restart Auto-negotiation */ + ctrl |= PHY_CT_ANE | PHY_CT_RE_CFG; + } else { + /* forced speed/duplex settings */ + ct1000 = PHY_M_1000C_MSE; + + if (skge->duplex == DUPLEX_FULL) + ctrl |= PHY_CT_DUP_MD; + + switch (skge->speed) { + case SPEED_1000: + ctrl |= PHY_CT_SP1000; + break; + case SPEED_100: + ctrl |= PHY_CT_SP100; + break; + } + + ctrl |= PHY_CT_RESET; + } + + if (hw->chip_id != CHIP_ID_YUKON_FE) + skge_gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000); + + skge_gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv); + skge_gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl); + + /* Setup Phy LED's */ + ledctrl = PHY_M_LED_PULS_DUR(PULS_170MS); + ledover = 0; + + if (hw->chip_id == CHIP_ID_YUKON_FE) { + /* on 88E3082 these bits are at 11..9 (shifted left) */ + ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) << 1; + + skge_gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, + ((skge_gm_phy_read(hw, port, PHY_MARV_FE_LED_PAR) + + & ~PHY_M_FELP_LED1_MSK) + | PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_ACT_BL))); + } else { + /* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */ + ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL; + + /* turn off the Rx LED (LED_RX) */ + ledover |= PHY_M_LED_MO_RX(MO_LED_OFF); + } + + /* disable blink mode (LED_DUPLEX) on collisions */ + ctrl |= PHY_M_LEDC_DP_CTRL; + skge_gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl); + + if (skge->autoneg == AUTONEG_DISABLE || skge->speed == SPEED_100) { + /* turn on 100 Mbps LED (LED_LINK100) */ + ledover |= PHY_M_LED_MO_100(MO_LED_ON); + } + + if (ledover) + skge_gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover); + + /* Enable phy interrupt on autonegotiation complete (or link up) */ + if (skge->autoneg == AUTONEG_ENABLE) + skge_gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL); + else + skge_gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK); +} + +static void yukon_reset(struct skge_hw *hw, int port) +{ + skge_gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);/* disable PHY IRQs */ + skge_gma_write16(hw, port, GM_MC_ADDR_H1, 0); /* clear MC hash */ + skge_gma_write16(hw, port, GM_MC_ADDR_H2, 0); + skge_gma_write16(hw, port, GM_MC_ADDR_H3, 0); + skge_gma_write16(hw, port, GM_MC_ADDR_H4, 0); + + skge_gma_write16(hw, port, GM_RX_CTRL, + skge_gma_read16(hw, port, GM_RX_CTRL) + | GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA); +} + +static void yukon_mac_init(struct skge_hw *hw, int port) +{ + struct skge_port *skge = netdev_priv(hw->dev[port]); + int i; + u32 reg; + const u8 *addr = hw->dev[port]->dev_addr; + + /* WA code for COMA mode -- set PHY reset */ + if (hw->chip_id == CHIP_ID_YUKON_LITE && + chip_rev(hw) == CHIP_REV_YU_LITE_A3) + skge_write32(hw, B2_GP_IO, + (skge_read32(hw, B2_GP_IO) | GP_DIR_9 | GP_IO_9)); + + /* hard reset */ + skge_write32(hw, SKGEMAC_REG(port, GPHY_CTRL), GPC_RST_SET); + skge_write32(hw, SKGEMAC_REG(port, GMAC_CTRL), GMC_RST_SET); + + /* WA code for COMA mode -- clear PHY reset */ + if (hw->chip_id == CHIP_ID_YUKON_LITE && + chip_rev(hw) == CHIP_REV_YU_LITE_A3) + skge_write32(hw, B2_GP_IO, + (skge_read32(hw, B2_GP_IO) | GP_DIR_9) + & ~GP_IO_9); + + /* Set hardware config mode */ + reg = GPC_INT_POL_HI | GPC_DIS_FC | GPC_DIS_SLEEP | + GPC_ENA_XC | GPC_ANEG_ADV_ALL_M | GPC_ENA_PAUSE; + reg |= iscopper(hw) ? GPC_HWCFG_GMII_COP : GPC_HWCFG_GMII_FIB; + + /* Clear GMC reset */ + skge_write32(hw, SKGEMAC_REG(port, GPHY_CTRL), reg | GPC_RST_SET); + skge_write32(hw, SKGEMAC_REG(port, GPHY_CTRL), reg | GPC_RST_CLR); + skge_write32(hw, SKGEMAC_REG(port, GMAC_CTRL), GMC_PAUSE_ON | GMC_RST_CLR); + if (skge->autoneg == AUTONEG_DISABLE) { + reg = GM_GPCR_AU_ALL_DIS; + skge_gma_write16(hw, port, GM_GP_CTRL, + skge_gma_read16(hw, port, GM_GP_CTRL) | reg); + + switch (skge->speed) { + case SPEED_1000: + reg |= GM_GPCR_SPEED_1000; + /* fallthru */ + case SPEED_100: + reg |= GM_GPCR_SPEED_100; + } + + if (skge->duplex == DUPLEX_FULL) + reg |= GM_GPCR_DUP_FULL; + } else + reg = GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100 | GM_GPCR_DUP_FULL; + switch (skge->flow_control) { + case FLOW_MODE_NONE: + skge_write32(hw, SKGEMAC_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); + reg |= GM_GPCR_FC_TX_DIS | GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS; + break; + case FLOW_MODE_LOC_SEND: + /* disable Rx flow-control */ + reg |= GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS; + } + + skge_gma_write16(hw, port, GM_GP_CTRL, reg); + skge_read16(hw, GMAC_IRQ_SRC); + + spin_lock_bh(&hw->phy_lock); + yukon_init(hw, port); + spin_unlock_bh(&hw->phy_lock); + + /* MIB clear */ + reg = skge_gma_read16(hw, port, GM_PHY_ADDR); + skge_gma_write16(hw, port, GM_PHY_ADDR, reg | GM_PAR_MIB_CLR); + + for (i = 0; i < GM_MIB_CNT_SIZE; i++) + skge_gma_read16(hw, port, GM_MIB_CNT_BASE + 8*i); + skge_gma_write16(hw, port, GM_PHY_ADDR, reg); + + /* transmit control */ + skge_gma_write16(hw, port, GM_TX_CTRL, TX_COL_THR(TX_COL_DEF)); + + /* receive control reg: unicast + multicast + no FCS */ + skge_gma_write16(hw, port, GM_RX_CTRL, + GM_RXCR_UCF_ENA | GM_RXCR_CRC_DIS | GM_RXCR_MCF_ENA); + + /* transmit flow control */ + skge_gma_write16(hw, port, GM_TX_FLOW_CTRL, 0xffff); + + /* transmit parameter */ + skge_gma_write16(hw, port, GM_TX_PARAM, + TX_JAM_LEN_VAL(TX_JAM_LEN_DEF) | + TX_JAM_IPG_VAL(TX_JAM_IPG_DEF) | + TX_IPG_JAM_DATA(TX_IPG_JAM_DEF)); + + /* serial mode register */ + reg = GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF); + if (hw->dev[port]->mtu > 1500) + reg |= GM_SMOD_JUMBO_ENA; + + skge_gma_write16(hw, port, GM_SERIAL_MODE, reg); + + /* physical address: used for pause frames */ + skge_gm_set_addr(hw, port, GM_SRC_ADDR_1L, addr); + /* virtual address for data */ + skge_gm_set_addr(hw, port, GM_SRC_ADDR_2L, addr); + + /* enable interrupt mask for counter overflows */ + skge_gma_write16(hw, port, GM_TX_IRQ_MSK, 0); + skge_gma_write16(hw, port, GM_RX_IRQ_MSK, 0); + skge_gma_write16(hw, port, GM_TR_IRQ_MSK, 0); + + /* Initialize Mac Fifo */ + + /* Configure Rx MAC FIFO */ + skge_write16(hw, SKGEMAC_REG(port, RX_GMF_FL_MSK), RX_FF_FL_DEF_MSK); + reg = GMF_OPER_ON | GMF_RX_F_FL_ON; + if (hw->chip_id == CHIP_ID_YUKON_LITE && + chip_rev(hw) == CHIP_REV_YU_LITE_A3) + reg &= ~GMF_RX_F_FL_ON; + skge_write8(hw, SKGEMAC_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR); + skge_write16(hw, SKGEMAC_REG(port, RX_GMF_CTRL_T), reg); + skge_write16(hw, SKGEMAC_REG(port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF); + + /* Configure Tx MAC FIFO */ + skge_write8(hw, SKGEMAC_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR); + skge_write16(hw, SKGEMAC_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON); +} + +static void yukon_stop(struct skge_port *skge) +{ + struct skge_hw *hw = skge->hw; + int port = skge->port; + + if (hw->chip_id == CHIP_ID_YUKON_LITE && + chip_rev(hw) == CHIP_REV_YU_LITE_A3) { + skge_write32(hw, B2_GP_IO, + skge_read32(hw, B2_GP_IO) | GP_DIR_9 | GP_IO_9); + } + + skge_gma_write16(hw, port, GM_GP_CTRL, + skge_gma_read16(hw, port, GM_GP_CTRL) + & ~(GM_GPCR_RX_ENA|GM_GPCR_RX_ENA)); + skge_gma_read16(hw, port, GM_GP_CTRL); + + /* set GPHY Control reset */ + skge_gma_write32(hw, port, GPHY_CTRL, GPC_RST_SET); + skge_gma_write32(hw, port, GMAC_CTRL, GMC_RST_SET); +} + +static void yukon_get_stats(struct skge_port *skge, u64 *data) +{ + struct skge_hw *hw = skge->hw; + int port = skge->port; + int i; + + data[0] = (u64) skge_gma_read32(hw, port, GM_TXO_OK_HI) << 32 + | skge_gma_read32(hw, port, GM_TXO_OK_LO); + data[1] = (u64) skge_gma_read32(hw, port, GM_RXO_OK_HI) << 32 + | skge_gma_read32(hw, port, GM_RXO_OK_LO); + + for (i = 2; i < ARRAY_SIZE(skge_stats); i++) + data[i] = skge_gma_read32(hw, port, + skge_stats[i].gma_offset); +} + +static void yukon_mac_intr(struct skge_hw *hw, int port) +{ + struct skge_port *skge = netdev_priv(hw->dev[port]); + u8 status = skge_read8(hw, SKGEMAC_REG(port, GMAC_IRQ_SRC)); + + pr_debug("yukon_intr status %x\n", status); + if (status & GM_IS_RX_FF_OR) { + ++skge->net_stats.rx_fifo_errors; + skge_gma_write8(hw, port, RX_GMF_CTRL_T, GMF_CLI_RX_FO); + } + if (status & GM_IS_TX_FF_UR) { + ++skge->net_stats.tx_fifo_errors; + skge_gma_write8(hw, port, TX_GMF_CTRL_T, GMF_CLI_TX_FU); + } + +} + +static u16 yukon_speed(const struct skge_hw *hw, u16 aux) +{ + if (hw->chip_id == CHIP_ID_YUKON_FE) + return (aux & PHY_M_PS_SPEED_100) ? SPEED_100 : SPEED_10; + + switch(aux & PHY_M_PS_SPEED_MSK) { + case PHY_M_PS_SPEED_1000: + return SPEED_1000; + case PHY_M_PS_SPEED_100: + return SPEED_100; + default: + return SPEED_10; + } +} + +static void yukon_link_up(struct skge_port *skge) +{ + struct skge_hw *hw = skge->hw; + int port = skge->port; + u16 reg; + + pr_debug("yukon_link_up\n"); + + /* Enable Transmit FIFO Underrun */ + skge_write8(hw, GMAC_IRQ_MSK, GMAC_DEF_MSK); + + reg = skge_gma_read16(hw, port, GM_GP_CTRL); + if (skge->duplex == DUPLEX_FULL || skge->autoneg == AUTONEG_ENABLE) + reg |= GM_GPCR_DUP_FULL; + + /* enable Rx/Tx */ + reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA; + skge_gma_write16(hw, port, GM_GP_CTRL, reg); + + skge_gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK); + skge_link_up(skge); +} + +static void yukon_link_down(struct skge_port *skge) +{ + struct skge_hw *hw = skge->hw; + int port = skge->port; + + pr_debug("yukon_link_down\n"); + skge_gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0); + skge_gm_phy_write(hw, port, GM_GP_CTRL, + skge_gm_phy_read(hw, port, GM_GP_CTRL) + & ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA)); + + if (hw->chip_id != CHIP_ID_YUKON_FE && + skge->flow_control == FLOW_MODE_REM_SEND) { + /* restore Asymmetric Pause bit */ + skge_gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, + skge_gm_phy_read(hw, port, + PHY_MARV_AUNE_ADV) + | PHY_M_AN_ASP); + + } + + yukon_reset(hw, port); + skge_link_down(skge); + + yukon_init(hw, port); +} + +static void yukon_phy_intr(struct skge_port *skge) +{ + struct skge_hw *hw = skge->hw; + int port = skge->port; + const char *reason = NULL; + u16 istatus, phystat; + + istatus = skge_gm_phy_read(hw, port, PHY_MARV_INT_STAT); + phystat = skge_gm_phy_read(hw, port, PHY_MARV_PHY_STAT); + pr_debug("yukon phy intr istat=%x phy_stat=%x\n", istatus, phystat); + + if (istatus & PHY_M_IS_AN_COMPL) { + if (skge_gm_phy_read(hw, port, PHY_MARV_AUNE_LP) + & PHY_M_AN_RF) { + reason = "remote fault"; + goto failed; + } + + if (!(hw->chip_id == CHIP_ID_YUKON_FE || hw->chip_id == CHIP_ID_YUKON_EC) + && (skge_gm_phy_read(hw, port, PHY_MARV_1000T_STAT) + & PHY_B_1000S_MSF)) { + reason = "master/slave fault"; + goto failed; + } + + if (!(phystat & PHY_M_PS_SPDUP_RES)) { + reason = "speed/duplex"; + goto failed; + } + + skge->duplex = (phystat & PHY_M_PS_FULL_DUP) + ? DUPLEX_FULL : DUPLEX_HALF; + skge->speed = yukon_speed(hw, phystat); + + /* Tx & Rx Pause Enabled bits are at 9..8 */ + if (hw->chip_id == CHIP_ID_YUKON_XL) + phystat >>= 6; + + /* We are using IEEE 802.3z/D5.0 Table 37-4 */ + switch (phystat & PHY_M_PS_PAUSE_MSK) { + case PHY_M_PS_PAUSE_MSK: + skge->flow_control = FLOW_MODE_SYMMETRIC; + break; + case PHY_M_PS_RX_P_EN: + skge->flow_control = FLOW_MODE_REM_SEND; + break; + case PHY_M_PS_TX_P_EN: + skge->flow_control = FLOW_MODE_LOC_SEND; + break; + default: + skge->flow_control = FLOW_MODE_NONE; + } + + if (skge->flow_control == FLOW_MODE_NONE || + (skge->speed < SPEED_1000 && skge->duplex == DUPLEX_HALF)) + skge_write8(hw, SKGEMAC_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); + else + skge_write8(hw, SKGEMAC_REG(port, GMAC_CTRL), GMC_PAUSE_ON); + yukon_link_up(skge); + return; + } + + if (istatus & PHY_M_IS_LSP_CHANGE) + skge->speed = yukon_speed(hw, phystat); + + if (istatus & PHY_M_IS_DUP_CHANGE) + skge->duplex = (phystat & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF; + if (istatus & PHY_M_IS_LST_CHANGE) { + if (phystat & PHY_M_PS_LINK_UP) + yukon_link_up(skge); + else + yukon_link_down(skge); + } + return; + failed: + printk(KERN_ERR PFX "%s: autonegotiation failed (%s)\n", + skge->netdev->name, reason); + + /* XXX restart autonegotiation? */ +} + +static void skge_ramset(struct skge_hw *hw, u16 q, u32 start, size_t len) +{ + u32 end; + + start /= 8; + len /= 8; + end = start + len - 1; + + skge_write8(hw, RB_ADDR(q, RB_CTRL), RB_RST_CLR); + skge_write32(hw, RB_ADDR(q, RB_START), start); + skge_write32(hw, RB_ADDR(q, RB_WP), start); + skge_write32(hw, RB_ADDR(q, RB_RP), start); + skge_write32(hw, RB_ADDR(q, RB_END), end); + + if (q == Q_R1 || q == Q_R2) { + /* Set thresholds on receive queue's */ + skge_write32(hw, RB_ADDR(q, RB_RX_UTPP), + start + (2*len)/3); + skge_write32(hw, RB_ADDR(q, RB_RX_LTPP), + start + (len/3)); + } else { + /* Enable store & forward on Tx queue's because + * Tx FIFO is only 4K on Genesis and 1K on Yukon + */ + skge_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_STFWD); + } + + skge_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_OP_MD); +} + +/* Setup Bus Memory Interface */ +static void skge_qset(struct skge_port *skge, u16 q, + const struct skge_element *e) +{ + struct skge_hw *hw = skge->hw; + u32 watermark = 0x600; + u64 base = skge->dma + (e->desc - skge->mem); + + /* optimization to reduce window on 32bit/33mhz */ + if ((skge_read16(hw, B0_CTST) & (CS_BUS_CLOCK | CS_BUS_SLOT_SZ)) == 0) + watermark /= 2; + + skge_write32(hw, Q_ADDR(q, Q_CSR), CSR_CLR_RESET); + skge_write32(hw, Q_ADDR(q, Q_F), watermark); + skge_write32(hw, Q_ADDR(q, Q_DA_H), (u32)(base >> 32)); + skge_write32(hw, Q_ADDR(q, Q_DA_L), (u32)base); +} + +static int skge_up(struct net_device *dev) +{ + struct skge_port *skge = netdev_priv(dev); + struct skge_hw *hw = skge->hw; + int port = skge->port; + u32 chunk, ram_addr; + size_t rx_size, tx_size; + int err; + + if (netif_msg_ifup(skge)) + printk(KERN_INFO PFX "%s: enabling interface\n", dev->name); + + rx_size = skge->rx_ring.count * sizeof(struct skge_rx_desc); + tx_size = skge->tx_ring.count * sizeof(struct skge_tx_desc); + skge->mem_size = tx_size + rx_size; + skge->mem = pci_alloc_consistent(hw->pdev, skge->mem_size, &skge->dma); + if (!skge->mem) + return -ENOMEM; + + memset(skge->mem, 0, skge->mem_size); + + if ((err = skge_ring_alloc(&skge->rx_ring, skge->mem, skge->dma))) + goto free_pci_mem; + + if (skge_rx_fill(skge)) + goto free_rx_ring; + + if ((err = skge_ring_alloc(&skge->tx_ring, skge->mem + rx_size, + skge->dma + rx_size))) + goto free_rx_ring; + + skge->tx_avail = skge->tx_ring.count - 1; + + /* Initialze MAC */ + if (hw->chip_id == CHIP_ID_GENESIS) + genesis_mac_init(hw, port); + else + yukon_mac_init(hw, port); + + /* Configure RAMbuffers */ + chunk = hw->ram_size / (isdualport(hw) ? 4 : 2); + ram_addr = hw->ram_offset + 2 * chunk * port; + + skge_ramset(hw, rxqaddr[port], ram_addr, chunk); + skge_qset(skge, rxqaddr[port], skge->rx_ring.to_clean); + + BUG_ON(skge->tx_ring.to_use != skge->tx_ring.to_clean); + skge_ramset(hw, txqaddr[port], ram_addr+chunk, chunk); + skge_qset(skge, txqaddr[port], skge->tx_ring.to_use); + + /* Start receiver BMU */ + wmb(); + skge_write8(hw, Q_ADDR(rxqaddr[port], Q_CSR), CSR_START | CSR_IRQ_CL_F); + + pr_debug("skge_up completed\n"); + return 0; + + free_rx_ring: + skge_rx_clean(skge); + kfree(skge->rx_ring.start); + free_pci_mem: + pci_free_consistent(hw->pdev, skge->mem_size, skge->mem, skge->dma); + + return err; +} + +static int skge_down(struct net_device *dev) +{ + struct skge_port *skge = netdev_priv(dev); + struct skge_hw *hw = skge->hw; + int port = skge->port; + + if (netif_msg_ifdown(skge)) + printk(KERN_INFO PFX "%s: disabling interface\n", dev->name); + + netif_stop_queue(dev); + + del_timer_sync(&skge->led_blink); + del_timer_sync(&skge->link_check); + + /* Stop transmitter */ + skge_write8(hw, Q_ADDR(txqaddr[port], Q_CSR), CSR_STOP); + skge_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), + RB_RST_SET|RB_DIS_OP_MD); + + if (hw->chip_id == CHIP_ID_GENESIS) + genesis_stop(skge); + else + yukon_stop(skge); + + /* Disable Force Sync bit and Enable Alloc bit */ + skge_write8(hw, SKGEMAC_REG(port, TXA_CTRL), + TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC); + + /* Stop Interval Timer and Limit Counter of Tx Arbiter */ + skge_write32(hw, SKGEMAC_REG(port, TXA_ITI_INI), 0L); + skge_write32(hw, SKGEMAC_REG(port, TXA_LIM_INI), 0L); + + /* Reset PCI FIFO */ + skge_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), CSR_SET_RESET); + skge_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET); + + /* Reset the RAM Buffer async Tx queue */ + skge_write8(hw, RB_ADDR(port == 0 ? Q_XA1 : Q_XA2, RB_CTRL), RB_RST_SET); + /* stop receiver */ + skge_write8(hw, Q_ADDR(rxqaddr[port], Q_CSR), CSR_STOP); + skge_write32(hw, RB_ADDR(port ? Q_R2 : Q_R1, RB_CTRL), + RB_RST_SET|RB_DIS_OP_MD); + skge_write32(hw, Q_ADDR(rxqaddr[port], Q_CSR), CSR_SET_RESET); + + if (hw->chip_id == CHIP_ID_GENESIS) { + skge_write8(hw, SKGEMAC_REG(port, TX_MFF_CTRL2), MFF_RST_SET); + skge_write8(hw, SKGEMAC_REG(port, RX_MFF_CTRL2), MFF_RST_SET); + skge_write8(hw, SKGEMAC_REG(port, TX_LED_CTRL), LED_STOP); + skge_write8(hw, SKGEMAC_REG(port, RX_LED_CTRL), LED_STOP); + } else { + skge_write8(hw, SKGEMAC_REG(port, RX_GMF_CTRL_T), GMF_RST_SET); + skge_write8(hw, SKGEMAC_REG(port, TX_GMF_CTRL_T), GMF_RST_SET); + } + + /* turn off led's */ + skge_write16(hw, B0_LED, LED_STAT_OFF); + + skge_tx_clean(skge); + skge_rx_clean(skge); + + kfree(skge->rx_ring.start); + kfree(skge->tx_ring.start); + pci_free_consistent(hw->pdev, skge->mem_size, skge->mem, skge->dma); + return 0; +} + +static int skge_xmit_frame(struct sk_buff *skb, struct net_device *dev) +{ + struct skge_port *skge = netdev_priv(dev); + struct skge_hw *hw = skge->hw; + struct skge_ring *ring = &skge->tx_ring; + struct skge_element *e; + struct skge_tx_desc *td; + int i; + u32 control, len; + u64 map; + unsigned long flags; + + skb = skb_padto(skb, ETH_ZLEN); + if (!skb) + return NETDEV_TX_OK; + + local_irq_save(flags); + if (!spin_trylock(&skge->tx_lock)) { + /* Collision - tell upper layer to requeue */ + local_irq_restore(flags); + return NETDEV_TX_LOCKED; + } + + if (unlikely(skge->tx_avail < skb_shinfo(skb)->nr_frags +1)) { + netif_stop_queue(dev); + spin_unlock_irqrestore(&skge->tx_lock, flags); + + printk(KERN_WARNING PFX "%s: ring full when queue awake!\n", + dev->name); + return NETDEV_TX_BUSY; + } + + e = ring->to_use; + td = e->desc; + e->skb = skb; + len = skb_headlen(skb); + map = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE); + pci_unmap_addr_set(e, mapaddr, map); + pci_unmap_len_set(e, maplen, len); + + td->dma_lo = map; + td->dma_hi = map >> 32; + + if (skb->ip_summed == CHECKSUM_HW) { + const struct iphdr *ip + = (const struct iphdr *) (skb->data + ETH_HLEN); + int offset = skb->h.raw - skb->data; + + /* This seems backwards, but it is what the sk98lin + * does. Looks like hardware is wrong? + */ + if (ip->protocol == IPPROTO_UDP + && chip_rev(hw) == 0 && hw->chip_id == CHIP_ID_YUKON) + control = BMU_TCP_CHECK; + else + control = BMU_UDP_CHECK; + + td->csum_offs = 0; + td->csum_start = offset; + td->csum_write = offset + skb->csum; + } else + control = BMU_CHECK; + + if (!skb_shinfo(skb)->nr_frags) /* single buffer i.e. no fragments */ + control |= BMU_EOF| BMU_IRQ_EOF; + else { + struct skge_tx_desc *tf = td; + + control |= BMU_STFWD; + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + + map = pci_map_page(hw->pdev, frag->page, frag->page_offset, + frag->size, PCI_DMA_TODEVICE); + + e = e->next; + e->skb = NULL; + tf = e->desc; + tf->dma_lo = map; + tf->dma_hi = (u64) map >> 32; + pci_unmap_addr_set(e, mapaddr, map); + pci_unmap_len_set(e, maplen, frag->size); + + tf->control = BMU_OWN | BMU_SW | control | frag->size; + } + tf->control |= BMU_EOF | BMU_IRQ_EOF; + } + /* Make sure all the descriptors written */ + wmb(); + td->control = BMU_OWN | BMU_SW | BMU_STF | control | len; + wmb(); + + skge_write8(hw, Q_ADDR(txqaddr[skge->port], Q_CSR), CSR_START); + + if (netif_msg_tx_queued(skge)) + printk(KERN_DEBUG "%s: tx queued, slot %d, len %d\n", + dev->name, e - ring->start, skb->len); + + ring->to_use = e->next; + skge->tx_avail -= skb_shinfo(skb)->nr_frags + 1; + if (skge->tx_avail <= MAX_SKB_FRAGS + 1) { + pr_debug("%s: transmit queue full\n", dev->name); + netif_stop_queue(dev); + } + + dev->trans_start = jiffies; + spin_unlock_irqrestore(&skge->tx_lock, flags); + + return NETDEV_TX_OK; +} + +static inline void skge_tx_free(struct skge_hw *hw, struct skge_element *e) +{ + if (e->skb) { + pci_unmap_single(hw->pdev, + pci_unmap_addr(e, mapaddr), + pci_unmap_len(e, maplen), + PCI_DMA_TODEVICE); + dev_kfree_skb_any(e->skb); + e->skb = NULL; + } else { + pci_unmap_page(hw->pdev, + pci_unmap_addr(e, mapaddr), + pci_unmap_len(e, maplen), + PCI_DMA_TODEVICE); + } +} + +static void skge_tx_clean(struct skge_port *skge) +{ + struct skge_ring *ring = &skge->tx_ring; + struct skge_element *e; + unsigned long flags; + + spin_lock_irqsave(&skge->tx_lock, flags); + for (e = ring->to_clean; e != ring->to_use; e = e->next) { + ++skge->tx_avail; + skge_tx_free(skge->hw, e); + } + ring->to_clean = e; + spin_unlock_irqrestore(&skge->tx_lock, flags); +} + +static void skge_tx_timeout(struct net_device *dev) +{ + struct skge_port *skge = netdev_priv(dev); + + if (netif_msg_timer(skge)) + printk(KERN_DEBUG PFX "%s: tx timeout\n", dev->name); + + skge_write8(skge->hw, Q_ADDR(txqaddr[skge->port], Q_CSR), CSR_STOP); + skge_tx_clean(skge); +} + +static int skge_change_mtu(struct net_device *dev, int new_mtu) +{ + int err = 0; + + if(new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU) + return -EINVAL; + + dev->mtu = new_mtu; + + if (netif_running(dev)) { + skge_down(dev); + skge_up(dev); + } + + return err; +} + +static void genesis_set_multicast(struct net_device *dev) +{ + struct skge_port *skge = netdev_priv(dev); + struct skge_hw *hw = skge->hw; + int port = skge->port; + int i, count = dev->mc_count; + struct dev_mc_list *list = dev->mc_list; + u32 mode; + u8 filter[8]; + + mode = skge_xm_read32(hw, port, XM_MODE); + mode |= XM_MD_ENA_HASH; + if (dev->flags & IFF_PROMISC) + mode |= XM_MD_ENA_PROM; + else + mode &= ~XM_MD_ENA_PROM; + + if (dev->flags & IFF_ALLMULTI) + memset(filter, 0xff, sizeof(filter)); + else { + memset(filter, 0, sizeof(filter)); + for(i = 0; list && i < count; i++, list = list->next) { + u32 crc = crc32_le(~0, list->dmi_addr, ETH_ALEN); + u8 bit = 63 - (crc & 63); + + filter[bit/8] |= 1 << (bit%8); + } + } + + skge_xm_outhash(hw, port, XM_HSM, filter); + + skge_xm_write32(hw, port, XM_MODE, mode); +} + +static void yukon_set_multicast(struct net_device *dev) +{ + struct skge_port *skge = netdev_priv(dev); + struct skge_hw *hw = skge->hw; + int port = skge->port; + struct dev_mc_list *list = dev->mc_list; + u16 reg; + u8 filter[8]; + + memset(filter, 0, sizeof(filter)); + + reg = skge_gma_read16(hw, port, GM_RX_CTRL); + reg |= GM_RXCR_UCF_ENA; + + if (dev->flags & IFF_PROMISC) /* promiscious */ + reg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA); + else if (dev->flags & IFF_ALLMULTI) /* all multicast */ + memset(filter, 0xff, sizeof(filter)); + else if (dev->mc_count == 0) /* no multicast */ + reg &= ~GM_RXCR_MCF_ENA; + else { + int i; + reg |= GM_RXCR_MCF_ENA; + + for(i = 0; list && i < dev->mc_count; i++, list = list->next) { + u32 bit = ether_crc(ETH_ALEN, list->dmi_addr) & 0x3f; + filter[bit/8] |= 1 << (bit%8); + } + } + + + skge_gma_write16(hw, port, GM_MC_ADDR_H1, + (u16)filter[0] | ((u16)filter[1] << 8)); + skge_gma_write16(hw, port, GM_MC_ADDR_H2, + (u16)filter[2] | ((u16)filter[3] << 8)); + skge_gma_write16(hw, port, GM_MC_ADDR_H3, + (u16)filter[4] | ((u16)filter[5] << 8)); + skge_gma_write16(hw, port, GM_MC_ADDR_H4, + (u16)filter[6] | ((u16)filter[7] << 8)); + + skge_gma_write16(hw, port, GM_RX_CTRL, reg); +} + +static inline int bad_phy_status(const struct skge_hw *hw, u32 status) +{ + if (hw->chip_id == CHIP_ID_GENESIS) + return (status & (XMR_FS_ERR | XMR_FS_2L_VLAN)) != 0; + else + return (status & GMR_FS_ANY_ERR) || + (status & GMR_FS_RX_OK) == 0; +} + +static void skge_rx_error(struct skge_port *skge, int slot, + u32 control, u32 status) +{ + if (netif_msg_rx_err(skge)) + printk(KERN_DEBUG PFX "%s: rx err, slot %d control 0x%x status 0x%x\n", + skge->netdev->name, slot, control, status); + + if ((control & (BMU_EOF|BMU_STF)) != (BMU_STF|BMU_EOF) + || (control & BMU_BBC) > skge->netdev->mtu + VLAN_ETH_HLEN) + skge->net_stats.rx_length_errors++; + else { + if (skge->hw->chip_id == CHIP_ID_GENESIS) { + if (status & (XMR_FS_RUNT|XMR_FS_LNG_ERR)) + skge->net_stats.rx_length_errors++; + if (status & XMR_FS_FRA_ERR) + skge->net_stats.rx_frame_errors++; + if (status & XMR_FS_FCS_ERR) + skge->net_stats.rx_crc_errors++; + } else { + if (status & (GMR_FS_LONG_ERR|GMR_FS_UN_SIZE)) + skge->net_stats.rx_length_errors++; + if (status & GMR_FS_FRAGMENT) + skge->net_stats.rx_frame_errors++; + if (status & GMR_FS_CRC_ERR) + skge->net_stats.rx_crc_errors++; + } + } +} + +static int skge_poll(struct net_device *dev, int *budget) +{ + struct skge_port *skge = netdev_priv(dev); + struct skge_hw *hw = skge->hw; + struct skge_ring *ring = &skge->rx_ring; + struct skge_element *e; + unsigned int to_do = min(dev->quota, *budget); + unsigned int work_done = 0; + int done; + static const u32 irqmask[] = { IS_PORT_1, IS_PORT_2 }; + + for (e = ring->to_clean; e != ring->to_use && work_done < to_do; + e = e->next) { + struct skge_rx_desc *rd = e->desc; + struct sk_buff *skb = e->skb; + u32 control, len, status; + + rmb(); + control = rd->control; + if (control & BMU_OWN) + break; + + len = control & BMU_BBC; + e->skb = NULL; + + pci_unmap_single(hw->pdev, + pci_unmap_addr(e, mapaddr), + pci_unmap_len(e, maplen), + PCI_DMA_FROMDEVICE); + + status = rd->status; + if ((control & (BMU_EOF|BMU_STF)) != (BMU_STF|BMU_EOF) + || len > dev->mtu + VLAN_ETH_HLEN + || bad_phy_status(hw, status)) { + skge_rx_error(skge, e - ring->start, control, status); + dev_kfree_skb(skb); + continue; + } + + if (netif_msg_rx_status(skge)) + printk(KERN_DEBUG PFX "%s: rx slot %d status 0x%x len %d\n", + dev->name, e - ring->start, rd->status, len); + + skb_put(skb, len); + skb->protocol = eth_type_trans(skb, dev); + + if (skge->rx_csum) { + skb->csum = le16_to_cpu(rd->csum2); + skb->ip_summed = CHECKSUM_HW; + } + + dev->last_rx = jiffies; + netif_receive_skb(skb); + + ++work_done; + } + ring->to_clean = e; + + *budget -= work_done; + dev->quota -= work_done; + done = work_done < to_do; + + if (skge_rx_fill(skge)) + done = 0; + + /* restart receiver */ + wmb(); + skge_write8(hw, Q_ADDR(rxqaddr[skge->port], Q_CSR), + CSR_START | CSR_IRQ_CL_F); + + if (done) { + local_irq_disable(); + hw->intr_mask |= irqmask[skge->port]; + /* Order is important since data can get interrupted */ + skge_write32(hw, B0_IMSK, hw->intr_mask); + __netif_rx_complete(dev); + local_irq_enable(); + } + + return !done; +} + +static inline void skge_tx_intr(struct net_device *dev) +{ + struct skge_port *skge = netdev_priv(dev); + struct skge_hw *hw = skge->hw; + struct skge_ring *ring = &skge->tx_ring; + struct skge_element *e; + + spin_lock(&skge->tx_lock); + for(e = ring->to_clean; e != ring->to_use; e = e->next) { + struct skge_tx_desc *td = e->desc; + u32 control; + + rmb(); + control = td->control; + if (control & BMU_OWN) + break; + + if (unlikely(netif_msg_tx_done(skge))) + printk(KERN_DEBUG PFX "%s: tx done slot %d status 0x%x\n", + dev->name, e - ring->start, td->status); + + skge_tx_free(hw, e); + e->skb = NULL; + ++skge->tx_avail; + } + ring->to_clean = e; + skge_write8(hw, Q_ADDR(txqaddr[skge->port], Q_CSR), CSR_IRQ_CL_F); + + if (skge->tx_avail > MAX_SKB_FRAGS + 1) + netif_wake_queue(dev); + + spin_unlock(&skge->tx_lock); +} + +static void skge_mac_parity(struct skge_hw *hw, int port) +{ + printk(KERN_ERR PFX "%s: mac data parity error\n", + hw->dev[port] ? hw->dev[port]->name + : (port == 0 ? "(port A)": "(port B")); + + if (hw->chip_id == CHIP_ID_GENESIS) + skge_write16(hw, SKGEMAC_REG(port, TX_MFF_CTRL1), + MFF_CLR_PERR); + else + /* HW-Bug #8: cleared by GMF_CLI_TX_FC instead of GMF_CLI_TX_PE */ + skge_write8(hw, SKGEMAC_REG(port, TX_GMF_CTRL_T), + (hw->chip_id == CHIP_ID_YUKON && chip_rev(hw) == 0) + ? GMF_CLI_TX_FC : GMF_CLI_TX_PE); +} + +static void skge_pci_clear(struct skge_hw *hw) +{ + u16 status; + + status = skge_read16(hw, SKGEPCI_REG(PCI_STATUS)); + skge_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); + skge_write16(hw, SKGEPCI_REG(PCI_STATUS), + status | PCI_STATUS_ERROR_BITS); + skge_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); +} + +static void skge_mac_intr(struct skge_hw *hw, int port) +{ + if (hw->chip_id == CHIP_ID_GENESIS) + genesis_mac_intr(hw, port); + else + yukon_mac_intr(hw, port); +} + +/* Handle device specific framing and timeout interrupts */ +static void skge_error_irq(struct skge_hw *hw) +{ + u32 hwstatus = skge_read32(hw, B0_HWE_ISRC); + + if (hw->chip_id == CHIP_ID_GENESIS) { + /* clear xmac errors */ + if (hwstatus & (IS_NO_STAT_M1|IS_NO_TIST_M1)) + skge_write16(hw, SKGEMAC_REG(0, RX_MFF_CTRL1), MFF_CLR_INSTAT); + if (hwstatus & (IS_NO_STAT_M2|IS_NO_TIST_M2)) + skge_write16(hw, SKGEMAC_REG(0, RX_MFF_CTRL2), MFF_CLR_INSTAT); + } else { + /* Timestamp (unused) overflow */ + if (hwstatus & IS_IRQ_TIST_OV) + skge_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ); + + if (hwstatus & IS_IRQ_SENSOR) { + /* no sensors on 32-bit Yukon */ + if (!(skge_read16(hw, B0_CTST) & CS_BUS_SLOT_SZ)) { + printk(KERN_ERR PFX "ignoring bogus sensor interrups\n"); + skge_write32(hw, B0_HWE_IMSK, + IS_ERR_MSK & ~IS_IRQ_SENSOR); + } else + printk(KERN_WARNING PFX "sensor interrupt\n"); + } + + + } + + if (hwstatus & IS_RAM_RD_PAR) { + printk(KERN_ERR PFX "Ram read data parity error\n"); + skge_write16(hw, B3_RI_CTRL, RI_CLR_RD_PERR); + } + + if (hwstatus & IS_RAM_WR_PAR) { + printk(KERN_ERR PFX "Ram write data parity error\n"); + skge_write16(hw, B3_RI_CTRL, RI_CLR_WR_PERR); + } + + if (hwstatus & IS_M1_PAR_ERR) + skge_mac_parity(hw, 0); + + if (hwstatus & IS_M2_PAR_ERR) + skge_mac_parity(hw, 1); + + if (hwstatus & IS_R1_PAR_ERR) + skge_write32(hw, B0_R1_CSR, CSR_IRQ_CL_P); + + if (hwstatus & IS_R2_PAR_ERR) + skge_write32(hw, B0_R2_CSR, CSR_IRQ_CL_P); + + if (hwstatus & (IS_IRQ_MST_ERR|IS_IRQ_STAT)) { + printk(KERN_ERR PFX "hardware error detected (status 0x%x)\n", + hwstatus); + + skge_pci_clear(hw); + + hwstatus = skge_read32(hw, B0_HWE_ISRC); + if (hwstatus & IS_IRQ_STAT) { + printk(KERN_WARNING PFX "IRQ status %x: still set ignoring hardware errors\n", + hwstatus); + hw->intr_mask &= ~IS_HW_ERR; + } + } +} + +/* + * Interrrupt from PHY are handled in tasklet (soft irq) + * because accessing phy registers requires spin wait which might + * cause excess interrupt latency. + */ +static void skge_extirq(unsigned long data) +{ + struct skge_hw *hw = (struct skge_hw *) data; + int port; + + spin_lock(&hw->phy_lock); + for (port = 0; port < 2; port++) { + struct net_device *dev = hw->dev[port]; + + if (dev && netif_running(dev)) { + struct skge_port *skge = netdev_priv(dev); + + if (hw->chip_id != CHIP_ID_GENESIS) + yukon_phy_intr(skge); + else if (hw->phy_type == SK_PHY_BCOM) + genesis_bcom_intr(skge); + } + } + spin_unlock(&hw->phy_lock); + + local_irq_disable(); + hw->intr_mask |= IS_EXT_REG; + skge_write32(hw, B0_IMSK, hw->intr_mask); + local_irq_enable(); +} + +static irqreturn_t skge_intr(int irq, void *dev_id, struct pt_regs *regs) +{ + struct skge_hw *hw = dev_id; + u32 status = skge_read32(hw, B0_SP_ISRC); + + if (status == 0 || status == ~0) /* hotplug or shared irq */ + return IRQ_NONE; + + status &= hw->intr_mask; + + if ((status & IS_R1_F) && netif_rx_schedule_prep(hw->dev[0])) { + status &= ~IS_R1_F; + hw->intr_mask &= ~IS_R1_F; + skge_write32(hw, B0_IMSK, hw->intr_mask); + __netif_rx_schedule(hw->dev[0]); + } + + if ((status & IS_R2_F) && netif_rx_schedule_prep(hw->dev[1])) { + status &= ~IS_R2_F; + hw->intr_mask &= ~IS_R2_F; + skge_write32(hw, B0_IMSK, hw->intr_mask); + __netif_rx_schedule(hw->dev[1]); + } + + if (status & IS_XA1_F) + skge_tx_intr(hw->dev[0]); + + if (status & IS_XA2_F) + skge_tx_intr(hw->dev[1]); + + if (status & IS_MAC1) + skge_mac_intr(hw, 0); + + if (status & IS_MAC2) + skge_mac_intr(hw, 1); + + if (status & IS_HW_ERR) + skge_error_irq(hw); + + if (status & IS_EXT_REG) { + hw->intr_mask &= ~IS_EXT_REG; + tasklet_schedule(&hw->ext_tasklet); + } + + if (status) + skge_write32(hw, B0_IMSK, hw->intr_mask); + + return IRQ_HANDLED; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void skge_netpoll(struct net_device *dev) +{ + struct skge_port *skge = netdev_priv(dev); + + disable_irq(dev->irq); + skge_intr(dev->irq, skge->hw, NULL); + enable_irq(dev->irq); +} +#endif + +static int skge_set_mac_address(struct net_device *dev, void *p) +{ + struct skge_port *skge = netdev_priv(dev); + struct sockaddr *addr = p; + int err = 0; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + skge_down(dev); + memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); + memcpy_toio(skge->hw->regs + B2_MAC_1 + skge->port*8, + dev->dev_addr, ETH_ALEN); + memcpy_toio(skge->hw->regs + B2_MAC_2 + skge->port*8, + dev->dev_addr, ETH_ALEN); + if (dev->flags & IFF_UP) + err = skge_up(dev); + return err; +} + +static const struct { + u8 id; + const char *name; +} skge_chips[] = { + { CHIP_ID_GENESIS, "Genesis" }, + { CHIP_ID_YUKON, "Yukon" }, + { CHIP_ID_YUKON_LITE, "Yukon-Lite"}, + { CHIP_ID_YUKON_LP, "Yukon-LP"}, + { CHIP_ID_YUKON_XL, "Yukon-2 XL"}, + { CHIP_ID_YUKON_EC, "YUKON-2 EC"}, + { CHIP_ID_YUKON_FE, "YUKON-2 FE"}, +}; + +static const char *skge_board_name(const struct skge_hw *hw) +{ + int i; + static char buf[16]; + + for (i = 0; i < ARRAY_SIZE(skge_chips); i++) + if (skge_chips[i].id == hw->chip_id) + return skge_chips[i].name; + + snprintf(buf, sizeof buf, "chipid 0x%x", hw->chip_id); + return buf; +} + + +/* + * Setup the board data structure, but don't bring up + * the port(s) + */ +static int skge_reset(struct skge_hw *hw) +{ + u16 ctst; + u8 t8; + int i, ports; + + ctst = skge_read16(hw, B0_CTST); + + /* do a SW reset */ + skge_write8(hw, B0_CTST, CS_RST_SET); + skge_write8(hw, B0_CTST, CS_RST_CLR); + + /* clear PCI errors, if any */ + skge_pci_clear(hw); + + skge_write8(hw, B0_CTST, CS_MRST_CLR); + + /* restore CLK_RUN bits (for Yukon-Lite) */ + skge_write16(hw, B0_CTST, + ctst & (CS_CLK_RUN_HOT|CS_CLK_RUN_RST|CS_CLK_RUN_ENA)); + + hw->chip_id = skge_read8(hw, B2_CHIP_ID); + hw->phy_type = skge_read8(hw, B2_E_1) & 0xf; + hw->pmd_type = skge_read8(hw, B2_PMD_TYP); + + switch(hw->chip_id) { + case CHIP_ID_GENESIS: + switch (hw->phy_type) { + case SK_PHY_XMAC: + hw->phy_addr = PHY_ADDR_XMAC; + break; + case SK_PHY_BCOM: + hw->phy_addr = PHY_ADDR_BCOM; + break; + default: + printk(KERN_ERR PFX "%s: unsupported phy type 0x%x\n", + pci_name(hw->pdev), hw->phy_type); + return -EOPNOTSUPP; + } + break; + + case CHIP_ID_YUKON: + case CHIP_ID_YUKON_LITE: + case CHIP_ID_YUKON_LP: + if (hw->phy_type < SK_PHY_MARV_COPPER && hw->pmd_type != 'S') + hw->phy_type = SK_PHY_MARV_COPPER; + + hw->phy_addr = PHY_ADDR_MARV; + if (!iscopper(hw)) + hw->phy_type = SK_PHY_MARV_FIBER; + + break; + + default: + printk(KERN_ERR PFX "%s: unsupported chip type 0x%x\n", + pci_name(hw->pdev), hw->chip_id); + return -EOPNOTSUPP; + } + + hw->mac_cfg = skge_read8(hw, B2_MAC_CFG); + ports = isdualport(hw) ? 2 : 1; + + /* read the adapters RAM size */ + t8 = skge_read8(hw, B2_E_0); + if (hw->chip_id == CHIP_ID_GENESIS) { + if (t8 == 3) { + /* special case: 4 x 64k x 36, offset = 0x80000 */ + hw->ram_size = 0x100000; + hw->ram_offset = 0x80000; + } else + hw->ram_size = t8 * 512; + } + else if (t8 == 0) + hw->ram_size = 0x20000; + else + hw->ram_size = t8 * 4096; + + if (hw->chip_id == CHIP_ID_GENESIS) + genesis_init(hw); + else { + /* switch power to VCC (WA for VAUX problem) */ + skge_write8(hw, B0_POWER_CTRL, + PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON); + for (i = 0; i < ports; i++) { + skge_write16(hw, SKGEMAC_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET); + skge_write16(hw, SKGEMAC_REG(i, GMAC_LINK_CTRL), GMLC_RST_CLR); + } + } + + /* turn off hardware timer (unused) */ + skge_write8(hw, B2_TI_CTRL, TIM_STOP); + skge_write8(hw, B2_TI_CTRL, TIM_CLR_IRQ); + skge_write8(hw, B0_LED, LED_STAT_ON); + + /* enable the Tx Arbiters */ + for (i = 0; i < ports; i++) + skge_write8(hw, SKGEMAC_REG(i, TXA_CTRL), TXA_ENA_ARB); + + /* Initialize ram interface */ + skge_write16(hw, B3_RI_CTRL, RI_RST_CLR); + + skge_write8(hw, B3_RI_WTO_R1, SK_RI_TO_53); + skge_write8(hw, B3_RI_WTO_XA1, SK_RI_TO_53); + skge_write8(hw, B3_RI_WTO_XS1, SK_RI_TO_53); + skge_write8(hw, B3_RI_RTO_R1, SK_RI_TO_53); + skge_write8(hw, B3_RI_RTO_XA1, SK_RI_TO_53); + skge_write8(hw, B3_RI_RTO_XS1, SK_RI_TO_53); + skge_write8(hw, B3_RI_WTO_R2, SK_RI_TO_53); + skge_write8(hw, B3_RI_WTO_XA2, SK_RI_TO_53); + skge_write8(hw, B3_RI_WTO_XS2, SK_RI_TO_53); + skge_write8(hw, B3_RI_RTO_R2, SK_RI_TO_53); + skge_write8(hw, B3_RI_RTO_XA2, SK_RI_TO_53); + skge_write8(hw, B3_RI_RTO_XS2, SK_RI_TO_53); + + skge_write32(hw, B0_HWE_IMSK, IS_ERR_MSK); + + /* Set interrupt moderation for Transmit only + * Receive interrupts avoided by NAPI + */ + skge_write32(hw, B2_IRQM_MSK, IS_XA1_F|IS_XA2_F); + skge_write32(hw, B2_IRQM_INI, skge_usecs2clk(hw, 100)); + skge_write32(hw, B2_IRQM_CTRL, TIM_START); + + hw->intr_mask = IS_HW_ERR | IS_EXT_REG | IS_PORT_1; + if (isdualport(hw)) + hw->intr_mask |= IS_PORT_2; + skge_write32(hw, B0_IMSK, hw->intr_mask); + + if (hw->chip_id != CHIP_ID_GENESIS) + skge_write8(hw, GMAC_IRQ_MSK, 0); + + spin_lock_bh(&hw->phy_lock); + for (i = 0; i < ports; i++) { + if (hw->chip_id == CHIP_ID_GENESIS) + genesis_reset(hw, i); + else + yukon_reset(hw, i); + } + spin_unlock_bh(&hw->phy_lock); + + return 0; +} + +/* Initialize network device */ +static struct net_device *skge_devinit(struct skge_hw *hw, int port) +{ + struct skge_port *skge; + struct net_device *dev = alloc_etherdev(sizeof(*skge)); + + if (!dev) { + printk(KERN_ERR "skge etherdev alloc failed"); + return NULL; + } + + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, &hw->pdev->dev); + dev->open = skge_up; + dev->stop = skge_down; + dev->hard_start_xmit = skge_xmit_frame; + dev->get_stats = skge_get_stats; + if (hw->chip_id == CHIP_ID_GENESIS) + dev->set_multicast_list = genesis_set_multicast; + else + dev->set_multicast_list = yukon_set_multicast; + + dev->set_mac_address = skge_set_mac_address; + dev->change_mtu = skge_change_mtu; + SET_ETHTOOL_OPS(dev, &skge_ethtool_ops); + dev->tx_timeout = skge_tx_timeout; + dev->watchdog_timeo = TX_WATCHDOG; + dev->poll = skge_poll; + dev->weight = NAPI_WEIGHT; +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = skge_netpoll; +#endif + dev->irq = hw->pdev->irq; + dev->features = NETIF_F_LLTX; + + skge = netdev_priv(dev); + skge->netdev = dev; + skge->hw = hw; + skge->msg_enable = netif_msg_init(debug, default_msg); + skge->tx_ring.count = DEFAULT_TX_RING_SIZE; + skge->rx_ring.count = DEFAULT_RX_RING_SIZE; + + /* Auto speed and flow control */ + skge->autoneg = AUTONEG_ENABLE; + skge->flow_control = FLOW_MODE_SYMMETRIC; + skge->duplex = -1; + skge->speed = -1; + skge->advertising = skge_modes(hw); + + hw->dev[port] = dev; + + skge->port = port; + + spin_lock_init(&skge->tx_lock); + + init_timer(&skge->link_check); + skge->link_check.function = skge_link_timer; + skge->link_check.data = (unsigned long) skge; + + init_timer(&skge->led_blink); + skge->led_blink.function = skge_blink_timer; + skge->led_blink.data = (unsigned long) skge; + + if (hw->chip_id != CHIP_ID_GENESIS) { + dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG; + skge->rx_csum = 1; + } + + /* read the mac address */ + memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port*8, ETH_ALEN); + + /* device is off until link detection */ + netif_carrier_off(dev); + netif_stop_queue(dev); + + return dev; +} + +static void __devinit skge_show_addr(struct net_device *dev) +{ + const struct skge_port *skge = netdev_priv(dev); + + if (netif_msg_probe(skge)) + printk(KERN_INFO PFX "%s: addr %02x:%02x:%02x:%02x:%02x:%02x\n", + dev->name, + dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2], + dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]); +} + +static int __devinit skge_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct net_device *dev, *dev1; + struct skge_hw *hw; + int err, using_dac = 0; + + if ((err = pci_enable_device(pdev))) { + printk(KERN_ERR PFX "%s cannot enable PCI device\n", + pci_name(pdev)); + goto err_out; + } + + if ((err = pci_request_regions(pdev, DRV_NAME))) { + printk(KERN_ERR PFX "%s cannot obtain PCI resources\n", + pci_name(pdev)); + goto err_out_disable_pdev; + } + + pci_set_master(pdev); + + if (!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK))) + using_dac = 1; + else if (!(err = pci_set_dma_mask(pdev, DMA_32BIT_MASK))) { + printk(KERN_ERR PFX "%s no usable DMA configuration\n", + pci_name(pdev)); + goto err_out_free_regions; + } + +#ifdef __BIG_ENDIAN + /* byte swap decriptors in hardware */ + { + u32 reg; + + pci_read_config_dword(pdev, PCI_DEV_REG2, ®); + reg |= PCI_REV_DESC; + pci_write_config_dword(pdev, PCI_DEV_REG2, reg); + } +#endif + + err = -ENOMEM; + hw = kmalloc(sizeof(*hw), GFP_KERNEL); + if (!hw) { + printk(KERN_ERR PFX "%s: cannot allocate hardware struct\n", + pci_name(pdev)); + goto err_out_free_regions; + } + + memset(hw, 0, sizeof(*hw)); + hw->pdev = pdev; + spin_lock_init(&hw->phy_lock); + tasklet_init(&hw->ext_tasklet, skge_extirq, (unsigned long) hw); + + hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000); + if (!hw->regs) { + printk(KERN_ERR PFX "%s: cannot map device registers\n", + pci_name(pdev)); + goto err_out_free_hw; + } + + if ((err = request_irq(pdev->irq, skge_intr, SA_SHIRQ, DRV_NAME, hw))) { + printk(KERN_ERR PFX "%s: cannot assign irq %d\n", + pci_name(pdev), pdev->irq); + goto err_out_iounmap; + } + pci_set_drvdata(pdev, hw); + + err = skge_reset(hw); + if (err) + goto err_out_free_irq; + + printk(KERN_INFO PFX "addr 0x%lx irq %d chip %s rev %d\n", + pci_resource_start(pdev, 0), pdev->irq, + skge_board_name(hw), chip_rev(hw)); + + if ((dev = skge_devinit(hw, 0)) == NULL) + goto err_out_led_off; + + if (using_dac) + dev->features |= NETIF_F_HIGHDMA; + + if ((err = register_netdev(dev))) { + printk(KERN_ERR PFX "%s: cannot register net device\n", + pci_name(pdev)); + goto err_out_free_netdev; + } + + skge_show_addr(dev); + + if (isdualport(hw) && (dev1 = skge_devinit(hw, 1))) { + if (using_dac) + dev1->features |= NETIF_F_HIGHDMA; + + if (register_netdev(dev1) == 0) + skge_show_addr(dev1); + else { + /* Failure to register second port need not be fatal */ + printk(KERN_WARNING PFX "register of second port failed\n"); + hw->dev[1] = NULL; + free_netdev(dev1); + } + } + + return 0; + +err_out_free_netdev: + free_netdev(dev); +err_out_led_off: + skge_write16(hw, B0_LED, LED_STAT_OFF); +err_out_free_irq: + free_irq(pdev->irq, hw); +err_out_iounmap: + iounmap(hw->regs); +err_out_free_hw: + kfree(hw); +err_out_free_regions: + pci_release_regions(pdev); +err_out_disable_pdev: + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); +err_out: + return err; +} + +static void __devexit skge_remove(struct pci_dev *pdev) +{ + struct skge_hw *hw = pci_get_drvdata(pdev); + struct net_device *dev0, *dev1; + + if(!hw) + return; + + if ((dev1 = hw->dev[1])) + unregister_netdev(dev1); + dev0 = hw->dev[0]; + unregister_netdev(dev0); + + tasklet_kill(&hw->ext_tasklet); + + free_irq(pdev->irq, hw); + pci_release_regions(pdev); + pci_disable_device(pdev); + if (dev1) + free_netdev(dev1); + free_netdev(dev0); + skge_write16(hw, B0_LED, LED_STAT_OFF); + iounmap(hw->regs); + kfree(hw); + pci_set_drvdata(pdev, NULL); +} + +#ifdef CONFIG_PM +static int skge_suspend(struct pci_dev *pdev, u32 state) +{ + struct skge_hw *hw = pci_get_drvdata(pdev); + int i, wol = 0; + + for(i = 0; i < 2; i++) { + struct net_device *dev = hw->dev[i]; + + if (dev) { + struct skge_port *skge = netdev_priv(dev); + if (netif_running(dev)) { + netif_carrier_off(dev); + skge_down(dev); + } + netif_device_detach(dev); + wol |= skge->wol; + } + } + + pci_save_state(pdev); + pci_enable_wake(pdev, state, wol); + pci_disable_device(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + + return 0; +} + +static int skge_resume(struct pci_dev *pdev) +{ + struct skge_hw *hw = pci_get_drvdata(pdev); + int i; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + pci_enable_wake(pdev, PCI_D0, 0); + + skge_reset(hw); + + for(i = 0; i < 2; i++) { + struct net_device *dev = hw->dev[i]; + if (dev) { + netif_device_attach(dev); + if(netif_running(dev)) + skge_up(dev); + } + } + return 0; +} +#endif + +static struct pci_driver skge_driver = { + .name = DRV_NAME, + .id_table = skge_id_table, + .probe = skge_probe, + .remove = __devexit_p(skge_remove), +#ifdef CONFIG_PM + .suspend = skge_suspend, + .resume = skge_resume, +#endif +}; + +static int __init skge_init_module(void) +{ + return pci_module_init(&skge_driver); +} + +static void __exit skge_cleanup_module(void) +{ + pci_unregister_driver(&skge_driver); +} + +module_init(skge_init_module); +module_exit(skge_cleanup_module); diff --git a/drivers/net/skge.h b/drivers/net/skge.h new file mode 100644 index 00000000000..36c62b68fab --- /dev/null +++ b/drivers/net/skge.h @@ -0,0 +1,3005 @@ +/* + * Definitions for the new Marvell Yukon / SysKonenct driver. + */ +#ifndef _SKGE_H +#define _SKGE_H + +/* PCI config registers */ +#define PCI_DEV_REG1 0x40 +#define PCI_DEV_REG2 0x44 +#ifndef PCI_VPD +#define PCI_VPD 0x50 +#endif + +/* PCI_OUR_REG_2 32 bit Our Register 2 */ +enum { + PCI_VPD_WR_THR = 0xff<<24, /* Bit 31..24: VPD Write Threshold */ + PCI_DEV_SEL = 0x7f<<17, /* Bit 23..17: EEPROM Device Select */ + PCI_VPD_ROM_SZ = 7 <<14, /* Bit 16..14: VPD ROM Size */ + /* Bit 13..12: reserved */ + PCI_EN_DUMMY_RD = 1<<3, /* Enable Dummy Read */ + PCI_REV_DESC = 1<<2, /* Reverse Desc. Bytes */ + PCI_USEDATA64 = 1<<0, /* Use 64Bit Data bus ext */ +}; + +/* PCI_VPD_ADR_REG 16 bit VPD Address Register */ +enum { + PCI_VPD_FLAG = 1<<15, /* starts VPD rd/wr cycle */ + PCI_VPD_ADR_MSK =0x7fffL, /* Bit 14.. 0: VPD Address Mask */ + VPD_RES_ID = 0x82, + VPD_RES_READ = 0x90, + VPD_RES_WRITE = 0x81, + VPD_RES_END = 0x78, +}; + + +#define PCI_STATUS_ERROR_BITS (PCI_STATUS_DETECTED_PARITY | \ + PCI_STATUS_SIG_SYSTEM_ERROR | \ + PCI_STATUS_REC_MASTER_ABORT | \ + PCI_STATUS_REC_TARGET_ABORT | \ + PCI_STATUS_PARITY) + + +enum csr_regs { + B0_RAP = 0x0000, + B0_CTST = 0x0004, + B0_LED = 0x0006, + B0_POWER_CTRL = 0x0007, + B0_ISRC = 0x0008, + B0_IMSK = 0x000c, + B0_HWE_ISRC = 0x0010, + B0_HWE_IMSK = 0x0014, + B0_SP_ISRC = 0x0018, + B0_XM1_IMSK = 0x0020, + B0_XM1_ISRC = 0x0028, + B0_XM1_PHY_ADDR = 0x0030, + B0_XM1_PHY_DATA = 0x0034, + B0_XM2_IMSK = 0x0040, + B0_XM2_ISRC = 0x0048, + B0_XM2_PHY_ADDR = 0x0050, + B0_XM2_PHY_DATA = 0x0054, + B0_R1_CSR = 0x0060, + B0_R2_CSR = 0x0064, + B0_XS1_CSR = 0x0068, + B0_XA1_CSR = 0x006c, + B0_XS2_CSR = 0x0070, + B0_XA2_CSR = 0x0074, + + B2_MAC_1 = 0x0100, + B2_MAC_2 = 0x0108, + B2_MAC_3 = 0x0110, + B2_CONN_TYP = 0x0118, + B2_PMD_TYP = 0x0119, + B2_MAC_CFG = 0x011a, + B2_CHIP_ID = 0x011b, + B2_E_0 = 0x011c, + B2_E_1 = 0x011d, + B2_E_2 = 0x011e, + B2_E_3 = 0x011f, + B2_FAR = 0x0120, + B2_FDP = 0x0124, + B2_LD_CTRL = 0x0128, + B2_LD_TEST = 0x0129, + B2_TI_INI = 0x0130, + B2_TI_VAL = 0x0134, + B2_TI_CTRL = 0x0138, + B2_TI_TEST = 0x0139, + B2_IRQM_INI = 0x0140, + B2_IRQM_VAL = 0x0144, + B2_IRQM_CTRL = 0x0148, + B2_IRQM_TEST = 0x0149, + B2_IRQM_MSK = 0x014c, + B2_IRQM_HWE_MSK = 0x0150, + B2_TST_CTRL1 = 0x0158, + B2_TST_CTRL2 = 0x0159, + B2_GP_IO = 0x015c, + B2_I2C_CTRL = 0x0160, + B2_I2C_DATA = 0x0164, + B2_I2C_IRQ = 0x0168, + B2_I2C_SW = 0x016c, + B2_BSC_INI = 0x0170, + B2_BSC_VAL = 0x0174, + B2_BSC_CTRL = 0x0178, + B2_BSC_STAT = 0x0179, + B2_BSC_TST = 0x017a, + + B3_RAM_ADDR = 0x0180, + B3_RAM_DATA_LO = 0x0184, + B3_RAM_DATA_HI = 0x0188, + B3_RI_WTO_R1 = 0x0190, + B3_RI_WTO_XA1 = 0x0191, + B3_RI_WTO_XS1 = 0x0192, + B3_RI_RTO_R1 = 0x0193, + B3_RI_RTO_XA1 = 0x0194, + B3_RI_RTO_XS1 = 0x0195, + B3_RI_WTO_R2 = 0x0196, + B3_RI_WTO_XA2 = 0x0197, + B3_RI_WTO_XS2 = 0x0198, + B3_RI_RTO_R2 = 0x0199, + B3_RI_RTO_XA2 = 0x019a, + B3_RI_RTO_XS2 = 0x019b, + B3_RI_TO_VAL = 0x019c, + B3_RI_CTRL = 0x01a0, + B3_RI_TEST = 0x01a2, + B3_MA_TOINI_RX1 = 0x01b0, + B3_MA_TOINI_RX2 = 0x01b1, + B3_MA_TOINI_TX1 = 0x01b2, + B3_MA_TOINI_TX2 = 0x01b3, + B3_MA_TOVAL_RX1 = 0x01b4, + B3_MA_TOVAL_RX2 = 0x01b5, + B3_MA_TOVAL_TX1 = 0x01b6, + B3_MA_TOVAL_TX2 = 0x01b7, + B3_MA_TO_CTRL = 0x01b8, + B3_MA_TO_TEST = 0x01ba, + B3_MA_RCINI_RX1 = 0x01c0, + B3_MA_RCINI_RX2 = 0x01c1, + B3_MA_RCINI_TX1 = 0x01c2, + B3_MA_RCINI_TX2 = 0x01c3, + B3_MA_RCVAL_RX1 = 0x01c4, + B3_MA_RCVAL_RX2 = 0x01c5, + B3_MA_RCVAL_TX1 = 0x01c6, + B3_MA_RCVAL_TX2 = 0x01c7, + B3_MA_RC_CTRL = 0x01c8, + B3_MA_RC_TEST = 0x01ca, + B3_PA_TOINI_RX1 = 0x01d0, + B3_PA_TOINI_RX2 = 0x01d4, + B3_PA_TOINI_TX1 = 0x01d8, + B3_PA_TOINI_TX2 = 0x01dc, + B3_PA_TOVAL_RX1 = 0x01e0, + B3_PA_TOVAL_RX2 = 0x01e4, + B3_PA_TOVAL_TX1 = 0x01e8, + B3_PA_TOVAL_TX2 = 0x01ec, + B3_PA_CTRL = 0x01f0, + B3_PA_TEST = 0x01f2, +}; + +/* B0_CTST 16 bit Control/Status register */ +enum { + CS_CLK_RUN_HOT = 1<<13,/* CLK_RUN hot m. (YUKON-Lite only) */ + CS_CLK_RUN_RST = 1<<12,/* CLK_RUN reset (YUKON-Lite only) */ + CS_CLK_RUN_ENA = 1<<11,/* CLK_RUN enable (YUKON-Lite only) */ + CS_VAUX_AVAIL = 1<<10,/* VAUX available (YUKON only) */ + CS_BUS_CLOCK = 1<<9, /* Bus Clock 0/1 = 33/66 MHz */ + CS_BUS_SLOT_SZ = 1<<8, /* Slot Size 0/1 = 32/64 bit slot */ + CS_ST_SW_IRQ = 1<<7, /* Set IRQ SW Request */ + CS_CL_SW_IRQ = 1<<6, /* Clear IRQ SW Request */ + CS_STOP_DONE = 1<<5, /* Stop Master is finished */ + CS_STOP_MAST = 1<<4, /* Command Bit to stop the master */ + CS_MRST_CLR = 1<<3, /* Clear Master reset */ + CS_MRST_SET = 1<<2, /* Set Master reset */ + CS_RST_CLR = 1<<1, /* Clear Software reset */ + CS_RST_SET = 1, /* Set Software reset */ + +/* B0_LED 8 Bit LED register */ +/* Bit 7.. 2: reserved */ + LED_STAT_ON = 1<<1, /* Status LED on */ + LED_STAT_OFF = 1, /* Status LED off */ + +/* B0_POWER_CTRL 8 Bit Power Control reg (YUKON only) */ + PC_VAUX_ENA = 1<<7, /* Switch VAUX Enable */ + PC_VAUX_DIS = 1<<6, /* Switch VAUX Disable */ + PC_VCC_ENA = 1<<5, /* Switch VCC Enable */ + PC_VCC_DIS = 1<<4, /* Switch VCC Disable */ + PC_VAUX_ON = 1<<3, /* Switch VAUX On */ + PC_VAUX_OFF = 1<<2, /* Switch VAUX Off */ + PC_VCC_ON = 1<<1, /* Switch VCC On */ + PC_VCC_OFF = 1<<0, /* Switch VCC Off */ +}; + +/* B2_IRQM_MSK 32 bit IRQ Moderation Mask */ +enum { + IS_ALL_MSK = 0xbffffffful, /* All Interrupt bits */ + IS_HW_ERR = 1<<31, /* Interrupt HW Error */ + /* Bit 30: reserved */ + IS_PA_TO_RX1 = 1<<29, /* Packet Arb Timeout Rx1 */ + IS_PA_TO_RX2 = 1<<28, /* Packet Arb Timeout Rx2 */ + IS_PA_TO_TX1 = 1<<27, /* Packet Arb Timeout Tx1 */ + IS_PA_TO_TX2 = 1<<26, /* Packet Arb Timeout Tx2 */ + IS_I2C_READY = 1<<25, /* IRQ on end of I2C Tx */ + IS_IRQ_SW = 1<<24, /* SW forced IRQ */ + IS_EXT_REG = 1<<23, /* IRQ from LM80 or PHY (GENESIS only) */ + /* IRQ from PHY (YUKON only) */ + IS_TIMINT = 1<<22, /* IRQ from Timer */ + IS_MAC1 = 1<<21, /* IRQ from MAC 1 */ + IS_LNK_SYNC_M1 = 1<<20, /* Link Sync Cnt wrap MAC 1 */ + IS_MAC2 = 1<<19, /* IRQ from MAC 2 */ + IS_LNK_SYNC_M2 = 1<<18, /* Link Sync Cnt wrap MAC 2 */ +/* Receive Queue 1 */ + IS_R1_B = 1<<17, /* Q_R1 End of Buffer */ + IS_R1_F = 1<<16, /* Q_R1 End of Frame */ + IS_R1_C = 1<<15, /* Q_R1 Encoding Error */ +/* Receive Queue 2 */ + IS_R2_B = 1<<14, /* Q_R2 End of Buffer */ + IS_R2_F = 1<<13, /* Q_R2 End of Frame */ + IS_R2_C = 1<<12, /* Q_R2 Encoding Error */ +/* Synchronous Transmit Queue 1 */ + IS_XS1_B = 1<<11, /* Q_XS1 End of Buffer */ + IS_XS1_F = 1<<10, /* Q_XS1 End of Frame */ + IS_XS1_C = 1<<9, /* Q_XS1 Encoding Error */ +/* Asynchronous Transmit Queue 1 */ + IS_XA1_B = 1<<8, /* Q_XA1 End of Buffer */ + IS_XA1_F = 1<<7, /* Q_XA1 End of Frame */ + IS_XA1_C = 1<<6, /* Q_XA1 Encoding Error */ +/* Synchronous Transmit Queue 2 */ + IS_XS2_B = 1<<5, /* Q_XS2 End of Buffer */ + IS_XS2_F = 1<<4, /* Q_XS2 End of Frame */ + IS_XS2_C = 1<<3, /* Q_XS2 Encoding Error */ +/* Asynchronous Transmit Queue 2 */ + IS_XA2_B = 1<<2, /* Q_XA2 End of Buffer */ + IS_XA2_F = 1<<1, /* Q_XA2 End of Frame */ + IS_XA2_C = 1<<0, /* Q_XA2 Encoding Error */ + + IS_PORT_1 = IS_XA1_F| IS_R1_F| IS_MAC1, + IS_PORT_2 = IS_XA2_F| IS_R2_F| IS_MAC2, +}; + + +/* B2_IRQM_HWE_MSK 32 bit IRQ Moderation HW Error Mask */ +enum { + IS_ERR_MSK = 0x00003fff,/* All Error bits */ + + IS_IRQ_TIST_OV = 1<<13, /* Time Stamp Timer Overflow (YUKON only) */ + IS_IRQ_SENSOR = 1<<12, /* IRQ from Sensor (YUKON only) */ + IS_IRQ_MST_ERR = 1<<11, /* IRQ master error detected */ + IS_IRQ_STAT = 1<<10, /* IRQ status exception */ + IS_NO_STAT_M1 = 1<<9, /* No Rx Status from MAC 1 */ + IS_NO_STAT_M2 = 1<<8, /* No Rx Status from MAC 2 */ + IS_NO_TIST_M1 = 1<<7, /* No Time Stamp from MAC 1 */ + IS_NO_TIST_M2 = 1<<6, /* No Time Stamp from MAC 2 */ + IS_RAM_RD_PAR = 1<<5, /* RAM Read Parity Error */ + IS_RAM_WR_PAR = 1<<4, /* RAM Write Parity Error */ + IS_M1_PAR_ERR = 1<<3, /* MAC 1 Parity Error */ + IS_M2_PAR_ERR = 1<<2, /* MAC 2 Parity Error */ + IS_R1_PAR_ERR = 1<<1, /* Queue R1 Parity Error */ + IS_R2_PAR_ERR = 1<<0, /* Queue R2 Parity Error */ +}; + +/* B2_TST_CTRL1 8 bit Test Control Register 1 */ +enum { + TST_FRC_DPERR_MR = 1<<7, /* force DATAPERR on MST RD */ + TST_FRC_DPERR_MW = 1<<6, /* force DATAPERR on MST WR */ + TST_FRC_DPERR_TR = 1<<5, /* force DATAPERR on TRG RD */ + TST_FRC_DPERR_TW = 1<<4, /* force DATAPERR on TRG WR */ + TST_FRC_APERR_M = 1<<3, /* force ADDRPERR on MST */ + TST_FRC_APERR_T = 1<<2, /* force ADDRPERR on TRG */ + TST_CFG_WRITE_ON = 1<<1, /* Enable Config Reg WR */ + TST_CFG_WRITE_OFF= 1<<0, /* Disable Config Reg WR */ +}; + +/* B2_MAC_CFG 8 bit MAC Configuration / Chip Revision */ +enum { + CFG_CHIP_R_MSK = 0xf<<4, /* Bit 7.. 4: Chip Revision */ + /* Bit 3.. 2: reserved */ + CFG_DIS_M2_CLK = 1<<1, /* Disable Clock for 2nd MAC */ + CFG_SNG_MAC = 1<<0, /* MAC Config: 0=2 MACs / 1=1 MAC*/ +}; + +/* B2_CHIP_ID 8 bit Chip Identification Number */ +enum { + CHIP_ID_GENESIS = 0x0a, /* Chip ID for GENESIS */ + CHIP_ID_YUKON = 0xb0, /* Chip ID for YUKON */ + CHIP_ID_YUKON_LITE = 0xb1, /* Chip ID for YUKON-Lite (Rev. A1-A3) */ + CHIP_ID_YUKON_LP = 0xb2, /* Chip ID for YUKON-LP */ + CHIP_ID_YUKON_XL = 0xb3, /* Chip ID for YUKON-2 XL */ + CHIP_ID_YUKON_EC = 0xb6, /* Chip ID for YUKON-2 EC */ + CHIP_ID_YUKON_FE = 0xb7, /* Chip ID for YUKON-2 FE */ + + CHIP_REV_YU_LITE_A1 = 3, /* Chip Rev. for YUKON-Lite A1,A2 */ + CHIP_REV_YU_LITE_A3 = 7, /* Chip Rev. for YUKON-Lite A3 */ +}; + +/* B2_LD_TEST 8 bit EPROM loader test register */ +enum { + LD_T_ON = 1<<3, /* Loader Test mode on */ + LD_T_OFF = 1<<2, /* Loader Test mode off */ + LD_T_STEP = 1<<1, /* Decrement FPROM addr. Counter */ + LD_START = 1<<0, /* Start loading FPROM */ +}; + +/* B2_TI_CTRL 8 bit Timer control */ +/* B2_IRQM_CTRL 8 bit IRQ Moderation Timer Control */ +enum { + TIM_START = 1<<2, /* Start Timer */ + TIM_STOP = 1<<1, /* Stop Timer */ + TIM_CLR_IRQ = 1<<0, /* Clear Timer IRQ (!IRQM) */ +}; + +/* B2_TI_TEST 8 Bit Timer Test */ +/* B2_IRQM_TEST 8 bit IRQ Moderation Timer Test */ +/* B28_DPT_TST 8 bit Descriptor Poll Timer Test Reg */ +enum { + TIM_T_ON = 1<<2, /* Test mode on */ + TIM_T_OFF = 1<<1, /* Test mode off */ + TIM_T_STEP = 1<<0, /* Test step */ +}; + +/* B28_DPT_INI 32 bit Descriptor Poll Timer Init Val */ +/* B28_DPT_VAL 32 bit Descriptor Poll Timer Curr Val */ +/* B28_DPT_CTRL 8 bit Descriptor Poll Timer Ctrl Reg */ +enum { + DPT_MSK = 0x00ffffffL, /* Bit 23.. 0: Desc Poll Timer Bits */ + + DPT_START = 1<<1, /* Start Descriptor Poll Timer */ + DPT_STOP = 1<<0, /* Stop Descriptor Poll Timer */ +}; + +/* B2_GP_IO 32 bit General Purpose I/O Register */ +enum { + GP_DIR_9 = 1<<25, /* IO_9 direct, 0=In/1=Out */ + GP_DIR_8 = 1<<24, /* IO_8 direct, 0=In/1=Out */ + GP_DIR_7 = 1<<23, /* IO_7 direct, 0=In/1=Out */ + GP_DIR_6 = 1<<22, /* IO_6 direct, 0=In/1=Out */ + GP_DIR_5 = 1<<21, /* IO_5 direct, 0=In/1=Out */ + GP_DIR_4 = 1<<20, /* IO_4 direct, 0=In/1=Out */ + GP_DIR_3 = 1<<19, /* IO_3 direct, 0=In/1=Out */ + GP_DIR_2 = 1<<18, /* IO_2 direct, 0=In/1=Out */ + GP_DIR_1 = 1<<17, /* IO_1 direct, 0=In/1=Out */ + GP_DIR_0 = 1<<16, /* IO_0 direct, 0=In/1=Out */ + + GP_IO_9 = 1<<9, /* IO_9 pin */ + GP_IO_8 = 1<<8, /* IO_8 pin */ + GP_IO_7 = 1<<7, /* IO_7 pin */ + GP_IO_6 = 1<<6, /* IO_6 pin */ + GP_IO_5 = 1<<5, /* IO_5 pin */ + GP_IO_4 = 1<<4, /* IO_4 pin */ + GP_IO_3 = 1<<3, /* IO_3 pin */ + GP_IO_2 = 1<<2, /* IO_2 pin */ + GP_IO_1 = 1<<1, /* IO_1 pin */ + GP_IO_0 = 1<<0, /* IO_0 pin */ +}; + +/* Rx/Tx Path related Arbiter Test Registers */ +/* B3_MA_TO_TEST 16 bit MAC Arbiter Timeout Test Reg */ +/* B3_MA_RC_TEST 16 bit MAC Arbiter Recovery Test Reg */ +/* B3_PA_TEST 16 bit Packet Arbiter Test Register */ +/* Bit 15, 11, 7, and 3 are reserved in B3_PA_TEST */ +enum { + TX2_T_EV = 1<<15,/* TX2 Timeout/Recv Event occured */ + TX2_T_ON = 1<<14,/* TX2 Timeout/Recv Timer Test On */ + TX2_T_OFF = 1<<13,/* TX2 Timeout/Recv Timer Tst Off */ + TX2_T_STEP = 1<<12,/* TX2 Timeout/Recv Timer Step */ + TX1_T_EV = 1<<11,/* TX1 Timeout/Recv Event occured */ + TX1_T_ON = 1<<10,/* TX1 Timeout/Recv Timer Test On */ + TX1_T_OFF = 1<<9, /* TX1 Timeout/Recv Timer Tst Off */ + TX1_T_STEP = 1<<8, /* TX1 Timeout/Recv Timer Step */ + RX2_T_EV = 1<<7, /* RX2 Timeout/Recv Event occured */ + RX2_T_ON = 1<<6, /* RX2 Timeout/Recv Timer Test On */ + RX2_T_OFF = 1<<5, /* RX2 Timeout/Recv Timer Tst Off */ + RX2_T_STEP = 1<<4, /* RX2 Timeout/Recv Timer Step */ + RX1_T_EV = 1<<3, /* RX1 Timeout/Recv Event occured */ + RX1_T_ON = 1<<2, /* RX1 Timeout/Recv Timer Test On */ + RX1_T_OFF = 1<<1, /* RX1 Timeout/Recv Timer Tst Off */ + RX1_T_STEP = 1<<0, /* RX1 Timeout/Recv Timer Step */ +}; + +/* Descriptor Bit Definition */ +/* TxCtrl Transmit Buffer Control Field */ +/* RxCtrl Receive Buffer Control Field */ +enum { + BMU_OWN = 1<<31, /* OWN bit: 0=host/1=BMU */ + BMU_STF = 1<<30, /* Start of Frame */ + BMU_EOF = 1<<29, /* End of Frame */ + BMU_IRQ_EOB = 1<<28, /* Req "End of Buffer" IRQ */ + BMU_IRQ_EOF = 1<<27, /* Req "End of Frame" IRQ */ + /* TxCtrl specific bits */ + BMU_STFWD = 1<<26, /* (Tx) Store & Forward Frame */ + BMU_NO_FCS = 1<<25, /* (Tx) Disable MAC FCS (CRC) generation */ + BMU_SW = 1<<24, /* (Tx) 1 bit res. for SW use */ + /* RxCtrl specific bits */ + BMU_DEV_0 = 1<<26, /* (Rx) Transfer data to Dev0 */ + BMU_STAT_VAL = 1<<25, /* (Rx) Rx Status Valid */ + BMU_TIST_VAL = 1<<24, /* (Rx) Rx TimeStamp Valid */ + /* Bit 23..16: BMU Check Opcodes */ + BMU_CHECK = 0x55<<16, /* Default BMU check */ + BMU_TCP_CHECK = 0x56<<16, /* Descr with TCP ext */ + BMU_UDP_CHECK = 0x57<<16, /* Descr with UDP ext (YUKON only) */ + BMU_BBC = 0xffffL, /* Bit 15.. 0: Buffer Byte Counter */ +}; + +/* B2_BSC_CTRL 8 bit Blink Source Counter Control */ +enum { + BSC_START = 1<<1, /* Start Blink Source Counter */ + BSC_STOP = 1<<0, /* Stop Blink Source Counter */ +}; + +/* B2_BSC_STAT 8 bit Blink Source Counter Status */ +enum { + BSC_SRC = 1<<0, /* Blink Source, 0=Off / 1=On */ +}; + +/* B2_BSC_TST 16 bit Blink Source Counter Test Reg */ +enum { + BSC_T_ON = 1<<2, /* Test mode on */ + BSC_T_OFF = 1<<1, /* Test mode off */ + BSC_T_STEP = 1<<0, /* Test step */ +}; + +/* B3_RAM_ADDR 32 bit RAM Address, to read or write */ + /* Bit 31..19: reserved */ +#define RAM_ADR_RAN 0x0007ffffL /* Bit 18.. 0: RAM Address Range */ +/* RAM Interface Registers */ + +/* B3_RI_CTRL 16 bit RAM Iface Control Register */ +enum { + RI_CLR_RD_PERR = 1<<9, /* Clear IRQ RAM Read Parity Err */ + RI_CLR_WR_PERR = 1<<8, /* Clear IRQ RAM Write Parity Err*/ + + RI_RST_CLR = 1<<1, /* Clear RAM Interface Reset */ + RI_RST_SET = 1<<0, /* Set RAM Interface Reset */ +}; + +/* B3_RI_TEST 8 bit RAM Iface Test Register */ +enum { + RI_T_EV = 1<<3, /* Timeout Event occured */ + RI_T_ON = 1<<2, /* Timeout Timer Test On */ + RI_T_OFF = 1<<1, /* Timeout Timer Test Off */ + RI_T_STEP = 1<<0, /* Timeout Timer Step */ +}; + +/* MAC Arbiter Registers */ +/* B3_MA_TO_CTRL 16 bit MAC Arbiter Timeout Ctrl Reg */ +enum { + MA_FOE_ON = 1<<3, /* XMAC Fast Output Enable ON */ + MA_FOE_OFF = 1<<2, /* XMAC Fast Output Enable OFF */ + MA_RST_CLR = 1<<1, /* Clear MAC Arbiter Reset */ + MA_RST_SET = 1<<0, /* Set MAC Arbiter Reset */ + +}; + +/* Timeout values */ +#define SK_MAC_TO_53 72 /* MAC arbiter timeout */ +#define SK_PKT_TO_53 0x2000 /* Packet arbiter timeout */ +#define SK_PKT_TO_MAX 0xffff /* Maximum value */ +#define SK_RI_TO_53 36 /* RAM interface timeout */ + + +/* B3_MA_RC_CTRL 16 bit MAC Arbiter Recovery Ctrl Reg */ +enum { + MA_ENA_REC_TX2 = 1<<7, /* Enable Recovery Timer TX2 */ + MA_DIS_REC_TX2 = 1<<6, /* Disable Recovery Timer TX2 */ + MA_ENA_REC_TX1 = 1<<5, /* Enable Recovery Timer TX1 */ + MA_DIS_REC_TX1 = 1<<4, /* Disable Recovery Timer TX1 */ + MA_ENA_REC_RX2 = 1<<3, /* Enable Recovery Timer RX2 */ + MA_DIS_REC_RX2 = 1<<2, /* Disable Recovery Timer RX2 */ + MA_ENA_REC_RX1 = 1<<1, /* Enable Recovery Timer RX1 */ + MA_DIS_REC_RX1 = 1<<0, /* Disable Recovery Timer RX1 */ +}; + +/* Packet Arbiter Registers */ +/* B3_PA_CTRL 16 bit Packet Arbiter Ctrl Register */ +enum { + PA_CLR_TO_TX2 = 1<<13, /* Clear IRQ Packet Timeout TX2 */ + PA_CLR_TO_TX1 = 1<<12, /* Clear IRQ Packet Timeout TX1 */ + PA_CLR_TO_RX2 = 1<<11, /* Clear IRQ Packet Timeout RX2 */ + PA_CLR_TO_RX1 = 1<<10, /* Clear IRQ Packet Timeout RX1 */ + PA_ENA_TO_TX2 = 1<<9, /* Enable Timeout Timer TX2 */ + PA_DIS_TO_TX2 = 1<<8, /* Disable Timeout Timer TX2 */ + PA_ENA_TO_TX1 = 1<<7, /* Enable Timeout Timer TX1 */ + PA_DIS_TO_TX1 = 1<<6, /* Disable Timeout Timer TX1 */ + PA_ENA_TO_RX2 = 1<<5, /* Enable Timeout Timer RX2 */ + PA_DIS_TO_RX2 = 1<<4, /* Disable Timeout Timer RX2 */ + PA_ENA_TO_RX1 = 1<<3, /* Enable Timeout Timer RX1 */ + PA_DIS_TO_RX1 = 1<<2, /* Disable Timeout Timer RX1 */ + PA_RST_CLR = 1<<1, /* Clear MAC Arbiter Reset */ + PA_RST_SET = 1<<0, /* Set MAC Arbiter Reset */ +}; + +#define PA_ENA_TO_ALL (PA_ENA_TO_RX1 | PA_ENA_TO_RX2 |\ + PA_ENA_TO_TX1 | PA_ENA_TO_TX2) + + +/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */ +/* TXA_ITI_INI 32 bit Tx Arb Interval Timer Init Val */ +/* TXA_ITI_VAL 32 bit Tx Arb Interval Timer Value */ +/* TXA_LIM_INI 32 bit Tx Arb Limit Counter Init Val */ +/* TXA_LIM_VAL 32 bit Tx Arb Limit Counter Value */ + +#define TXA_MAX_VAL 0x00ffffffUL /* Bit 23.. 0: Max TXA Timer/Cnt Val */ + +/* TXA_CTRL 8 bit Tx Arbiter Control Register */ +enum { + TXA_ENA_FSYNC = 1<<7, /* Enable force of sync Tx queue */ + TXA_DIS_FSYNC = 1<<6, /* Disable force of sync Tx queue */ + TXA_ENA_ALLOC = 1<<5, /* Enable alloc of free bandwidth */ + TXA_DIS_ALLOC = 1<<4, /* Disable alloc of free bandwidth */ + TXA_START_RC = 1<<3, /* Start sync Rate Control */ + TXA_STOP_RC = 1<<2, /* Stop sync Rate Control */ + TXA_ENA_ARB = 1<<1, /* Enable Tx Arbiter */ + TXA_DIS_ARB = 1<<0, /* Disable Tx Arbiter */ +}; + +/* + * Bank 4 - 5 + */ +/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */ +enum { + TXA_ITI_INI = 0x0200,/* 32 bit Tx Arb Interval Timer Init Val*/ + TXA_ITI_VAL = 0x0204,/* 32 bit Tx Arb Interval Timer Value */ + TXA_LIM_INI = 0x0208,/* 32 bit Tx Arb Limit Counter Init Val */ + TXA_LIM_VAL = 0x020c,/* 32 bit Tx Arb Limit Counter Value */ + TXA_CTRL = 0x0210,/* 8 bit Tx Arbiter Control Register */ + TXA_TEST = 0x0211,/* 8 bit Tx Arbiter Test Register */ + TXA_STAT = 0x0212,/* 8 bit Tx Arbiter Status Register */ +}; + + +enum { + B6_EXT_REG = 0x0300,/* External registers (GENESIS only) */ + B7_CFG_SPC = 0x0380,/* copy of the Configuration register */ + B8_RQ1_REGS = 0x0400,/* Receive Queue 1 */ + B8_RQ2_REGS = 0x0480,/* Receive Queue 2 */ + B8_TS1_REGS = 0x0600,/* Transmit sync queue 1 */ + B8_TA1_REGS = 0x0680,/* Transmit async queue 1 */ + B8_TS2_REGS = 0x0700,/* Transmit sync queue 2 */ + B8_TA2_REGS = 0x0780,/* Transmit sync queue 2 */ + B16_RAM_REGS = 0x0800,/* RAM Buffer Registers */ +}; + +/* Queue Register Offsets, use Q_ADDR() to access */ +enum { + B8_Q_REGS = 0x0400, /* base of Queue registers */ + Q_D = 0x00, /* 8*32 bit Current Descriptor */ + Q_DA_L = 0x20, /* 32 bit Current Descriptor Address Low dWord */ + Q_DA_H = 0x24, /* 32 bit Current Descriptor Address High dWord */ + Q_AC_L = 0x28, /* 32 bit Current Address Counter Low dWord */ + Q_AC_H = 0x2c, /* 32 bit Current Address Counter High dWord */ + Q_BC = 0x30, /* 32 bit Current Byte Counter */ + Q_CSR = 0x34, /* 32 bit BMU Control/Status Register */ + Q_F = 0x38, /* 32 bit Flag Register */ + Q_T1 = 0x3c, /* 32 bit Test Register 1 */ + Q_T1_TR = 0x3c, /* 8 bit Test Register 1 Transfer SM */ + Q_T1_WR = 0x3d, /* 8 bit Test Register 1 Write Descriptor SM */ + Q_T1_RD = 0x3e, /* 8 bit Test Register 1 Read Descriptor SM */ + Q_T1_SV = 0x3f, /* 8 bit Test Register 1 Supervisor SM */ + Q_T2 = 0x40, /* 32 bit Test Register 2 */ + Q_T3 = 0x44, /* 32 bit Test Register 3 */ + +/* Yukon-2 */ + Q_DONE = 0x24, /* 16 bit Done Index (Yukon-2 only) */ + Q_WM = 0x40, /* 16 bit FIFO Watermark */ + Q_AL = 0x42, /* 8 bit FIFO Alignment */ + Q_RSP = 0x44, /* 16 bit FIFO Read Shadow Pointer */ + Q_RSL = 0x46, /* 8 bit FIFO Read Shadow Level */ + Q_RP = 0x48, /* 8 bit FIFO Read Pointer */ + Q_RL = 0x4a, /* 8 bit FIFO Read Level */ + Q_WP = 0x4c, /* 8 bit FIFO Write Pointer */ + Q_WSP = 0x4d, /* 8 bit FIFO Write Shadow Pointer */ + Q_WL = 0x4e, /* 8 bit FIFO Write Level */ + Q_WSL = 0x4f, /* 8 bit FIFO Write Shadow Level */ +}; +#define Q_ADDR(reg, offs) (B8_Q_REGS + (reg) + (offs)) + +/* RAM Buffer Register Offsets */ +enum { + + RB_START = 0x00,/* 32 bit RAM Buffer Start Address */ + RB_END = 0x04,/* 32 bit RAM Buffer End Address */ + RB_WP = 0x08,/* 32 bit RAM Buffer Write Pointer */ + RB_RP = 0x0c,/* 32 bit RAM Buffer Read Pointer */ + RB_RX_UTPP = 0x10,/* 32 bit Rx Upper Threshold, Pause Packet */ + RB_RX_LTPP = 0x14,/* 32 bit Rx Lower Threshold, Pause Packet */ + RB_RX_UTHP = 0x18,/* 32 bit Rx Upper Threshold, High Prio */ + RB_RX_LTHP = 0x1c,/* 32 bit Rx Lower Threshold, High Prio */ + /* 0x10 - 0x1f: reserved at Tx RAM Buffer Registers */ + RB_PC = 0x20,/* 32 bit RAM Buffer Packet Counter */ + RB_LEV = 0x24,/* 32 bit RAM Buffer Level Register */ + RB_CTRL = 0x28,/* 32 bit RAM Buffer Control Register */ + RB_TST1 = 0x29,/* 8 bit RAM Buffer Test Register 1 */ + RB_TST2 = 0x2a,/* 8 bit RAM Buffer Test Register 2 */ +}; + +/* Receive and Transmit Queues */ +enum { + Q_R1 = 0x0000, /* Receive Queue 1 */ + Q_R2 = 0x0080, /* Receive Queue 2 */ + Q_XS1 = 0x0200, /* Synchronous Transmit Queue 1 */ + Q_XA1 = 0x0280, /* Asynchronous Transmit Queue 1 */ + Q_XS2 = 0x0300, /* Synchronous Transmit Queue 2 */ + Q_XA2 = 0x0380, /* Asynchronous Transmit Queue 2 */ +}; + +/* Different MAC Types */ +enum { + SK_MAC_XMAC = 0, /* Xaqti XMAC II */ + SK_MAC_GMAC = 1, /* Marvell GMAC */ +}; + +/* Different PHY Types */ +enum { + SK_PHY_XMAC = 0,/* integrated in XMAC II */ + SK_PHY_BCOM = 1,/* Broadcom BCM5400 */ + SK_PHY_LONE = 2,/* Level One LXT1000 [not supported]*/ + SK_PHY_NAT = 3,/* National DP83891 [not supported] */ + SK_PHY_MARV_COPPER= 4,/* Marvell 88E1011S */ + SK_PHY_MARV_FIBER = 5,/* Marvell 88E1011S working on fiber */ +}; + +/* PHY addresses (bits 12..8 of PHY address reg) */ +enum { + PHY_ADDR_XMAC = 0<<8, + PHY_ADDR_BCOM = 1<<8, + PHY_ADDR_LONE = 3<<8, + PHY_ADDR_NAT = 0<<8, +/* GPHY address (bits 15..11 of SMI control reg) */ + PHY_ADDR_MARV = 0, +}; + +#define RB_ADDR(offs, queue) (B16_RAM_REGS + (queue) + (offs)) + +/* Receive MAC FIFO, Receive LED, and Link_Sync regs (GENESIS only) */ +enum { + RX_MFF_EA = 0x0c00,/* 32 bit Receive MAC FIFO End Address */ + RX_MFF_WP = 0x0c04,/* 32 bit Receive MAC FIFO Write Pointer */ + + RX_MFF_RP = 0x0c0c,/* 32 bit Receive MAC FIFO Read Pointer */ + RX_MFF_PC = 0x0c10,/* 32 bit Receive MAC FIFO Packet Cnt */ + RX_MFF_LEV = 0x0c14,/* 32 bit Receive MAC FIFO Level */ + RX_MFF_CTRL1 = 0x0c18,/* 16 bit Receive MAC FIFO Control Reg 1*/ + RX_MFF_STAT_TO = 0x0c1a,/* 8 bit Receive MAC Status Timeout */ + RX_MFF_TIST_TO = 0x0c1b,/* 8 bit Receive MAC Time Stamp Timeout */ + RX_MFF_CTRL2 = 0x0c1c,/* 8 bit Receive MAC FIFO Control Reg 2*/ + RX_MFF_TST1 = 0x0c1d,/* 8 bit Receive MAC FIFO Test Reg 1 */ + RX_MFF_TST2 = 0x0c1e,/* 8 bit Receive MAC FIFO Test Reg 2 */ + + RX_LED_INI = 0x0c20,/* 32 bit Receive LED Cnt Init Value */ + RX_LED_VAL = 0x0c24,/* 32 bit Receive LED Cnt Current Value */ + RX_LED_CTRL = 0x0c28,/* 8 bit Receive LED Cnt Control Reg */ + RX_LED_TST = 0x0c29,/* 8 bit Receive LED Cnt Test Register */ + + LNK_SYNC_INI = 0x0c30,/* 32 bit Link Sync Cnt Init Value */ + LNK_SYNC_VAL = 0x0c34,/* 32 bit Link Sync Cnt Current Value */ + LNK_SYNC_CTRL = 0x0c38,/* 8 bit Link Sync Cnt Control Register */ + LNK_SYNC_TST = 0x0c39,/* 8 bit Link Sync Cnt Test Register */ + LNK_LED_REG = 0x0c3c,/* 8 bit Link LED Register */ +}; + +/* Receive and Transmit MAC FIFO Registers (GENESIS only) */ +/* RX_MFF_CTRL1 16 bit Receive MAC FIFO Control Reg 1 */ +enum { + MFF_ENA_RDY_PAT = 1<<13, /* Enable Ready Patch */ + MFF_DIS_RDY_PAT = 1<<12, /* Disable Ready Patch */ + MFF_ENA_TIM_PAT = 1<<11, /* Enable Timing Patch */ + MFF_DIS_TIM_PAT = 1<<10, /* Disable Timing Patch */ + MFF_ENA_ALM_FUL = 1<<9, /* Enable AlmostFull Sign */ + MFF_DIS_ALM_FUL = 1<<8, /* Disable AlmostFull Sign */ + MFF_ENA_PAUSE = 1<<7, /* Enable Pause Signaling */ + MFF_DIS_PAUSE = 1<<6, /* Disable Pause Signaling */ + MFF_ENA_FLUSH = 1<<5, /* Enable Frame Flushing */ + MFF_DIS_FLUSH = 1<<4, /* Disable Frame Flushing */ + MFF_ENA_TIST = 1<<3, /* Enable Time Stamp Gener */ + MFF_DIS_TIST = 1<<2, /* Disable Time Stamp Gener */ + MFF_CLR_INTIST = 1<<1, /* Clear IRQ No Time Stamp */ + MFF_CLR_INSTAT = 1<<0, /* Clear IRQ No Status */ +#define MFF_RX_CTRL_DEF MFF_ENA_TIM_PAT +}; + +/* TX_MFF_CTRL1 16 bit Transmit MAC FIFO Control Reg 1 */ +enum { + MFF_CLR_PERR = 1<<15, /* Clear Parity Error IRQ */ + /* Bit 14: reserved */ + MFF_ENA_PKT_REC = 1<<13, /* Enable Packet Recovery */ + MFF_DIS_PKT_REC = 1<<12, /* Disable Packet Recovery */ + + MFF_ENA_W4E = 1<<7, /* Enable Wait for Empty */ + MFF_DIS_W4E = 1<<6, /* Disable Wait for Empty */ + + MFF_ENA_LOOPB = 1<<3, /* Enable Loopback */ + MFF_DIS_LOOPB = 1<<2, /* Disable Loopback */ + MFF_CLR_MAC_RST = 1<<1, /* Clear XMAC Reset */ + MFF_SET_MAC_RST = 1<<0, /* Set XMAC Reset */ +}; + +#define MFF_TX_CTRL_DEF (MFF_ENA_PKT_REC | MFF_ENA_TIM_PAT | MFF_ENA_FLUSH) + +/* RX_MFF_TST2 8 bit Receive MAC FIFO Test Register 2 */ +/* TX_MFF_TST2 8 bit Transmit MAC FIFO Test Register 2 */ +enum { + MFF_WSP_T_ON = 1<<6, /* Tx: Write Shadow Ptr TestOn */ + MFF_WSP_T_OFF = 1<<5, /* Tx: Write Shadow Ptr TstOff */ + MFF_WSP_INC = 1<<4, /* Tx: Write Shadow Ptr Increment */ + MFF_PC_DEC = 1<<3, /* Packet Counter Decrement */ + MFF_PC_T_ON = 1<<2, /* Packet Counter Test On */ + MFF_PC_T_OFF = 1<<1, /* Packet Counter Test Off */ + MFF_PC_INC = 1<<0, /* Packet Counter Increment */ +}; + +/* RX_MFF_TST1 8 bit Receive MAC FIFO Test Register 1 */ +/* TX_MFF_TST1 8 bit Transmit MAC FIFO Test Register 1 */ +enum { + MFF_WP_T_ON = 1<<6, /* Write Pointer Test On */ + MFF_WP_T_OFF = 1<<5, /* Write Pointer Test Off */ + MFF_WP_INC = 1<<4, /* Write Pointer Increm */ + + MFF_RP_T_ON = 1<<2, /* Read Pointer Test On */ + MFF_RP_T_OFF = 1<<1, /* Read Pointer Test Off */ + MFF_RP_DEC = 1<<0, /* Read Pointer Decrement */ +}; + +/* RX_MFF_CTRL2 8 bit Receive MAC FIFO Control Reg 2 */ +/* TX_MFF_CTRL2 8 bit Transmit MAC FIFO Control Reg 2 */ +enum { + MFF_ENA_OP_MD = 1<<3, /* Enable Operation Mode */ + MFF_DIS_OP_MD = 1<<2, /* Disable Operation Mode */ + MFF_RST_CLR = 1<<1, /* Clear MAC FIFO Reset */ + MFF_RST_SET = 1<<0, /* Set MAC FIFO Reset */ +}; + + +/* Link LED Counter Registers (GENESIS only) */ + +/* RX_LED_CTRL 8 bit Receive LED Cnt Control Reg */ +/* TX_LED_CTRL 8 bit Transmit LED Cnt Control Reg */ +/* LNK_SYNC_CTRL 8 bit Link Sync Cnt Control Register */ +enum { + LED_START = 1<<2, /* Start Timer */ + LED_STOP = 1<<1, /* Stop Timer */ + LED_STATE = 1<<0, /* Rx/Tx: LED State, 1=LED on */ +}; + +/* RX_LED_TST 8 bit Receive LED Cnt Test Register */ +/* TX_LED_TST 8 bit Transmit LED Cnt Test Register */ +/* LNK_SYNC_TST 8 bit Link Sync Cnt Test Register */ +enum { + LED_T_ON = 1<<2, /* LED Counter Test mode On */ + LED_T_OFF = 1<<1, /* LED Counter Test mode Off */ + LED_T_STEP = 1<<0, /* LED Counter Step */ +}; + +/* LNK_LED_REG 8 bit Link LED Register */ +enum { + LED_BLK_ON = 1<<5, /* Link LED Blinking On */ + LED_BLK_OFF = 1<<4, /* Link LED Blinking Off */ + LED_SYNC_ON = 1<<3, /* Use Sync Wire to switch LED */ + LED_SYNC_OFF = 1<<2, /* Disable Sync Wire Input */ + LED_ON = 1<<1, /* switch LED on */ + LED_OFF = 1<<0, /* switch LED off */ +}; + +/* Receive GMAC FIFO (YUKON and Yukon-2) */ +enum { + RX_GMF_EA = 0x0c40,/* 32 bit Rx GMAC FIFO End Address */ + RX_GMF_AF_THR = 0x0c44,/* 32 bit Rx GMAC FIFO Almost Full Thresh. */ + RX_GMF_CTRL_T = 0x0c48,/* 32 bit Rx GMAC FIFO Control/Test */ + RX_GMF_FL_MSK = 0x0c4c,/* 32 bit Rx GMAC FIFO Flush Mask */ + RX_GMF_FL_THR = 0x0c50,/* 32 bit Rx GMAC FIFO Flush Threshold */ + RX_GMF_TR_THR = 0x0c54,/* 32 bit Rx Truncation Threshold (Yukon-2) */ + + RX_GMF_VLAN = 0x0c5c,/* 32 bit Rx VLAN Type Register (Yukon-2) */ + RX_GMF_WP = 0x0c60,/* 32 bit Rx GMAC FIFO Write Pointer */ + + RX_GMF_WLEV = 0x0c68,/* 32 bit Rx GMAC FIFO Write Level */ + + RX_GMF_RP = 0x0c70,/* 32 bit Rx GMAC FIFO Read Pointer */ + + RX_GMF_RLEV = 0x0c78,/* 32 bit Rx GMAC FIFO Read Level */ +}; + + +/* TXA_TEST 8 bit Tx Arbiter Test Register */ +enum { + TXA_INT_T_ON = 1<<5, /* Tx Arb Interval Timer Test On */ + TXA_INT_T_OFF = 1<<4, /* Tx Arb Interval Timer Test Off */ + TXA_INT_T_STEP = 1<<3, /* Tx Arb Interval Timer Step */ + TXA_LIM_T_ON = 1<<2, /* Tx Arb Limit Timer Test On */ + TXA_LIM_T_OFF = 1<<1, /* Tx Arb Limit Timer Test Off */ + TXA_LIM_T_STEP = 1<<0, /* Tx Arb Limit Timer Step */ +}; + +/* TXA_STAT 8 bit Tx Arbiter Status Register */ +enum { + TXA_PRIO_XS = 1<<0, /* sync queue has prio to send */ +}; + + +/* Q_BC 32 bit Current Byte Counter */ + +/* BMU Control Status Registers */ +/* B0_R1_CSR 32 bit BMU Ctrl/Stat Rx Queue 1 */ +/* B0_R2_CSR 32 bit BMU Ctrl/Stat Rx Queue 2 */ +/* B0_XA1_CSR 32 bit BMU Ctrl/Stat Sync Tx Queue 1 */ +/* B0_XS1_CSR 32 bit BMU Ctrl/Stat Async Tx Queue 1 */ +/* B0_XA2_CSR 32 bit BMU Ctrl/Stat Sync Tx Queue 2 */ +/* B0_XS2_CSR 32 bit BMU Ctrl/Stat Async Tx Queue 2 */ +/* Q_CSR 32 bit BMU Control/Status Register */ + +enum { + CSR_SV_IDLE = 1<<24, /* BMU SM Idle */ + + CSR_DESC_CLR = 1<<21, /* Clear Reset for Descr */ + CSR_DESC_SET = 1<<20, /* Set Reset for Descr */ + CSR_FIFO_CLR = 1<<19, /* Clear Reset for FIFO */ + CSR_FIFO_SET = 1<<18, /* Set Reset for FIFO */ + CSR_HPI_RUN = 1<<17, /* Release HPI SM */ + CSR_HPI_RST = 1<<16, /* Reset HPI SM to Idle */ + CSR_SV_RUN = 1<<15, /* Release Supervisor SM */ + CSR_SV_RST = 1<<14, /* Reset Supervisor SM */ + CSR_DREAD_RUN = 1<<13, /* Release Descr Read SM */ + CSR_DREAD_RST = 1<<12, /* Reset Descr Read SM */ + CSR_DWRITE_RUN = 1<<11, /* Release Descr Write SM */ + CSR_DWRITE_RST = 1<<10, /* Reset Descr Write SM */ + CSR_TRANS_RUN = 1<<9, /* Release Transfer SM */ + CSR_TRANS_RST = 1<<8, /* Reset Transfer SM */ + CSR_ENA_POL = 1<<7, /* Enable Descr Polling */ + CSR_DIS_POL = 1<<6, /* Disable Descr Polling */ + CSR_STOP = 1<<5, /* Stop Rx/Tx Queue */ + CSR_START = 1<<4, /* Start Rx/Tx Queue */ + CSR_IRQ_CL_P = 1<<3, /* (Rx) Clear Parity IRQ */ + CSR_IRQ_CL_B = 1<<2, /* Clear EOB IRQ */ + CSR_IRQ_CL_F = 1<<1, /* Clear EOF IRQ */ + CSR_IRQ_CL_C = 1<<0, /* Clear ERR IRQ */ +}; + +#define CSR_SET_RESET (CSR_DESC_SET | CSR_FIFO_SET | CSR_HPI_RST |\ + CSR_SV_RST | CSR_DREAD_RST | CSR_DWRITE_RST |\ + CSR_TRANS_RST) +#define CSR_CLR_RESET (CSR_DESC_CLR | CSR_FIFO_CLR | CSR_HPI_RUN |\ + CSR_SV_RUN | CSR_DREAD_RUN | CSR_DWRITE_RUN |\ + CSR_TRANS_RUN) + +/* Q_F 32 bit Flag Register */ +enum { + F_ALM_FULL = 1<<27, /* Rx FIFO: almost full */ + F_EMPTY = 1<<27, /* Tx FIFO: empty flag */ + F_FIFO_EOF = 1<<26, /* Tag (EOF Flag) bit in FIFO */ + F_WM_REACHED = 1<<25, /* Watermark reached */ + + F_FIFO_LEVEL = 0x1fL<<16, /* Bit 23..16: # of Qwords in FIFO */ + F_WATER_MARK = 0x0007ffL, /* Bit 10.. 0: Watermark */ +}; + +/* RAM Buffer Register Offsets, use RB_ADDR(Queue, Offs) to access */ +/* RB_START 32 bit RAM Buffer Start Address */ +/* RB_END 32 bit RAM Buffer End Address */ +/* RB_WP 32 bit RAM Buffer Write Pointer */ +/* RB_RP 32 bit RAM Buffer Read Pointer */ +/* RB_RX_UTPP 32 bit Rx Upper Threshold, Pause Pack */ +/* RB_RX_LTPP 32 bit Rx Lower Threshold, Pause Pack */ +/* RB_RX_UTHP 32 bit Rx Upper Threshold, High Prio */ +/* RB_RX_LTHP 32 bit Rx Lower Threshold, High Prio */ +/* RB_PC 32 bit RAM Buffer Packet Counter */ +/* RB_LEV 32 bit RAM Buffer Level Register */ + +#define RB_MSK 0x0007ffff /* Bit 18.. 0: RAM Buffer Pointer Bits */ +/* RB_TST2 8 bit RAM Buffer Test Register 2 */ +/* RB_TST1 8 bit RAM Buffer Test Register 1 */ + +/* RB_CTRL 8 bit RAM Buffer Control Register */ +enum { + RB_ENA_STFWD = 1<<5, /* Enable Store & Forward */ + RB_DIS_STFWD = 1<<4, /* Disable Store & Forward */ + RB_ENA_OP_MD = 1<<3, /* Enable Operation Mode */ + RB_DIS_OP_MD = 1<<2, /* Disable Operation Mode */ + RB_RST_CLR = 1<<1, /* Clear RAM Buf STM Reset */ + RB_RST_SET = 1<<0, /* Set RAM Buf STM Reset */ +}; + +/* Transmit MAC FIFO and Transmit LED Registers (GENESIS only), */ +enum { + TX_MFF_EA = 0x0d00,/* 32 bit Transmit MAC FIFO End Address */ + TX_MFF_WP = 0x0d04,/* 32 bit Transmit MAC FIFO WR Pointer */ + TX_MFF_WSP = 0x0d08,/* 32 bit Transmit MAC FIFO WR Shadow Ptr */ + TX_MFF_RP = 0x0d0c,/* 32 bit Transmit MAC FIFO RD Pointer */ + TX_MFF_PC = 0x0d10,/* 32 bit Transmit MAC FIFO Packet Cnt */ + TX_MFF_LEV = 0x0d14,/* 32 bit Transmit MAC FIFO Level */ + TX_MFF_CTRL1 = 0x0d18,/* 16 bit Transmit MAC FIFO Ctrl Reg 1 */ + TX_MFF_WAF = 0x0d1a,/* 8 bit Transmit MAC Wait after flush */ + + TX_MFF_CTRL2 = 0x0d1c,/* 8 bit Transmit MAC FIFO Ctrl Reg 2 */ + TX_MFF_TST1 = 0x0d1d,/* 8 bit Transmit MAC FIFO Test Reg 1 */ + TX_MFF_TST2 = 0x0d1e,/* 8 bit Transmit MAC FIFO Test Reg 2 */ + + TX_LED_INI = 0x0d20,/* 32 bit Transmit LED Cnt Init Value */ + TX_LED_VAL = 0x0d24,/* 32 bit Transmit LED Cnt Current Val */ + TX_LED_CTRL = 0x0d28,/* 8 bit Transmit LED Cnt Control Reg */ + TX_LED_TST = 0x0d29,/* 8 bit Transmit LED Cnt Test Reg */ +}; + +/* Counter and Timer constants, for a host clock of 62.5 MHz */ +#define SK_XMIT_DUR 0x002faf08UL /* 50 ms */ +#define SK_BLK_DUR 0x01dcd650UL /* 500 ms */ + +#define SK_DPOLL_DEF 0x00ee6b28UL /* 250 ms at 62.5 MHz */ + +#define SK_DPOLL_MAX 0x00ffffffUL /* 268 ms at 62.5 MHz */ + /* 215 ms at 78.12 MHz */ + +#define SK_FACT_62 100 /* is given in percent */ +#define SK_FACT_53 85 /* on GENESIS: 53.12 MHz */ +#define SK_FACT_78 125 /* on YUKON: 78.12 MHz */ + + +/* Transmit GMAC FIFO (YUKON only) */ +enum { + TX_GMF_EA = 0x0d40,/* 32 bit Tx GMAC FIFO End Address */ + TX_GMF_AE_THR = 0x0d44,/* 32 bit Tx GMAC FIFO Almost Empty Thresh.*/ + TX_GMF_CTRL_T = 0x0d48,/* 32 bit Tx GMAC FIFO Control/Test */ + + TX_GMF_WP = 0x0d60,/* 32 bit Tx GMAC FIFO Write Pointer */ + TX_GMF_WSP = 0x0d64,/* 32 bit Tx GMAC FIFO Write Shadow Ptr. */ + TX_GMF_WLEV = 0x0d68,/* 32 bit Tx GMAC FIFO Write Level */ + + TX_GMF_RP = 0x0d70,/* 32 bit Tx GMAC FIFO Read Pointer */ + TX_GMF_RSTP = 0x0d74,/* 32 bit Tx GMAC FIFO Restart Pointer */ + TX_GMF_RLEV = 0x0d78,/* 32 bit Tx GMAC FIFO Read Level */ + + /* Descriptor Poll Timer Registers */ + B28_DPT_INI = 0x0e00,/* 24 bit Descriptor Poll Timer Init Val */ + B28_DPT_VAL = 0x0e04,/* 24 bit Descriptor Poll Timer Curr Val */ + B28_DPT_CTRL = 0x0e08,/* 8 bit Descriptor Poll Timer Ctrl Reg */ + + B28_DPT_TST = 0x0e0a,/* 8 bit Descriptor Poll Timer Test Reg */ + + /* Time Stamp Timer Registers (YUKON only) */ + GMAC_TI_ST_VAL = 0x0e14,/* 32 bit Time Stamp Timer Curr Val */ + GMAC_TI_ST_CTRL = 0x0e18,/* 8 bit Time Stamp Timer Ctrl Reg */ + GMAC_TI_ST_TST = 0x0e1a,/* 8 bit Time Stamp Timer Test Reg */ +}; + +/* Status BMU Registers (Yukon-2 only)*/ +enum { + STAT_CTRL = 0x0e80,/* 32 bit Status BMU Control Reg */ + STAT_LAST_IDX = 0x0e84,/* 16 bit Status BMU Last Index */ + /* 0x0e85 - 0x0e86: reserved */ + STAT_LIST_ADDR_LO = 0x0e88,/* 32 bit Status List Start Addr (low) */ + STAT_LIST_ADDR_HI = 0x0e8c,/* 32 bit Status List Start Addr (high) */ + STAT_TXA1_RIDX = 0x0e90,/* 16 bit Status TxA1 Report Index Reg */ + STAT_TXS1_RIDX = 0x0e92,/* 16 bit Status TxS1 Report Index Reg */ + STAT_TXA2_RIDX = 0x0e94,/* 16 bit Status TxA2 Report Index Reg */ + STAT_TXS2_RIDX = 0x0e96,/* 16 bit Status TxS2 Report Index Reg */ + STAT_TX_IDX_TH = 0x0e98,/* 16 bit Status Tx Index Threshold Reg */ + STAT_PUT_IDX = 0x0e9c,/* 16 bit Status Put Index Reg */ + +/* FIFO Control/Status Registers (Yukon-2 only)*/ + STAT_FIFO_WP = 0x0ea0,/* 8 bit Status FIFO Write Pointer Reg */ + STAT_FIFO_RP = 0x0ea4,/* 8 bit Status FIFO Read Pointer Reg */ + STAT_FIFO_RSP = 0x0ea6,/* 8 bit Status FIFO Read Shadow Ptr */ + STAT_FIFO_LEVEL = 0x0ea8,/* 8 bit Status FIFO Level Reg */ + STAT_FIFO_SHLVL = 0x0eaa,/* 8 bit Status FIFO Shadow Level Reg */ + STAT_FIFO_WM = 0x0eac,/* 8 bit Status FIFO Watermark Reg */ + STAT_FIFO_ISR_WM = 0x0ead,/* 8 bit Status FIFO ISR Watermark Reg */ + +/* Level and ISR Timer Registers (Yukon-2 only)*/ + STAT_LEV_TIMER_INI = 0x0eb0,/* 32 bit Level Timer Init. Value Reg */ + STAT_LEV_TIMER_CNT = 0x0eb4,/* 32 bit Level Timer Counter Reg */ + STAT_LEV_TIMER_CTRL = 0x0eb8,/* 8 bit Level Timer Control Reg */ + STAT_LEV_TIMER_TEST = 0x0eb9,/* 8 bit Level Timer Test Reg */ + STAT_TX_TIMER_INI = 0x0ec0,/* 32 bit Tx Timer Init. Value Reg */ + STAT_TX_TIMER_CNT = 0x0ec4,/* 32 bit Tx Timer Counter Reg */ + STAT_TX_TIMER_CTRL = 0x0ec8,/* 8 bit Tx Timer Control Reg */ + STAT_TX_TIMER_TEST = 0x0ec9,/* 8 bit Tx Timer Test Reg */ + STAT_ISR_TIMER_INI = 0x0ed0,/* 32 bit ISR Timer Init. Value Reg */ + STAT_ISR_TIMER_CNT = 0x0ed4,/* 32 bit ISR Timer Counter Reg */ + STAT_ISR_TIMER_CTRL = 0x0ed8,/* 8 bit ISR Timer Control Reg */ + STAT_ISR_TIMER_TEST = 0x0ed9,/* 8 bit ISR Timer Test Reg */ + + ST_LAST_IDX_MASK = 0x007f,/* Last Index Mask */ + ST_TXRP_IDX_MASK = 0x0fff,/* Tx Report Index Mask */ + ST_TXTH_IDX_MASK = 0x0fff,/* Tx Threshold Index Mask */ + ST_WM_IDX_MASK = 0x3f,/* FIFO Watermark Index Mask */ +}; + +enum { + LINKLED_OFF = 0x01, + LINKLED_ON = 0x02, + LINKLED_LINKSYNC_OFF = 0x04, + LINKLED_LINKSYNC_ON = 0x08, + LINKLED_BLINK_OFF = 0x10, + LINKLED_BLINK_ON = 0x20, +}; + +/* GMAC and GPHY Control Registers (YUKON only) */ +enum { + GMAC_CTRL = 0x0f00,/* 32 bit GMAC Control Reg */ + GPHY_CTRL = 0x0f04,/* 32 bit GPHY Control Reg */ + GMAC_IRQ_SRC = 0x0f08,/* 8 bit GMAC Interrupt Source Reg */ + GMAC_IRQ_MSK = 0x0f0c,/* 8 bit GMAC Interrupt Mask Reg */ + GMAC_LINK_CTRL = 0x0f10,/* 16 bit Link Control Reg */ + +/* Wake-up Frame Pattern Match Control Registers (YUKON only) */ + + WOL_REG_OFFS = 0x20,/* HW-Bug: Address is + 0x20 against spec. */ + + WOL_CTRL_STAT = 0x0f20,/* 16 bit WOL Control/Status Reg */ + WOL_MATCH_CTL = 0x0f22,/* 8 bit WOL Match Control Reg */ + WOL_MATCH_RES = 0x0f23,/* 8 bit WOL Match Result Reg */ + WOL_MAC_ADDR = 0x0f24,/* 32 bit WOL MAC Address */ + WOL_PATT_PME = 0x0f2a,/* 8 bit WOL PME Match Enable (Yukon-2) */ + WOL_PATT_ASFM = 0x0f2b,/* 8 bit WOL ASF Match Enable (Yukon-2) */ + WOL_PATT_RPTR = 0x0f2c,/* 8 bit WOL Pattern Read Pointer */ + +/* WOL Pattern Length Registers (YUKON only) */ + + WOL_PATT_LEN_LO = 0x0f30,/* 32 bit WOL Pattern Length 3..0 */ + WOL_PATT_LEN_HI = 0x0f34,/* 24 bit WOL Pattern Length 6..4 */ + +/* WOL Pattern Counter Registers (YUKON only) */ + + WOL_PATT_CNT_0 = 0x0f38,/* 32 bit WOL Pattern Counter 3..0 */ + WOL_PATT_CNT_4 = 0x0f3c,/* 24 bit WOL Pattern Counter 6..4 */ +}; + +enum { + WOL_PATT_RAM_1 = 0x1000,/* WOL Pattern RAM Link 1 */ + WOL_PATT_RAM_2 = 0x1400,/* WOL Pattern RAM Link 2 */ +}; + +enum { + BASE_XMAC_1 = 0x2000,/* XMAC 1 registers */ + BASE_GMAC_1 = 0x2800,/* GMAC 1 registers */ + BASE_XMAC_2 = 0x3000,/* XMAC 2 registers */ + BASE_GMAC_2 = 0x3800,/* GMAC 2 registers */ +}; + +/* + * Receive Frame Status Encoding + */ +enum { + XMR_FS_LEN = 0x3fff<<18, /* Bit 31..18: Rx Frame Length */ + XMR_FS_2L_VLAN = 1<<17, /* Bit 17: tagged wh 2Lev VLAN ID*/ + XMR_FS_1_VLAN = 1<<16, /* Bit 16: tagged wh 1ev VLAN ID*/ + XMR_FS_BC = 1<<15, /* Bit 15: Broadcast Frame */ + XMR_FS_MC = 1<<14, /* Bit 14: Multicast Frame */ + XMR_FS_UC = 1<<13, /* Bit 13: Unicast Frame */ + + XMR_FS_BURST = 1<<11, /* Bit 11: Burst Mode */ + XMR_FS_CEX_ERR = 1<<10, /* Bit 10: Carrier Ext. Error */ + XMR_FS_802_3 = 1<<9, /* Bit 9: 802.3 Frame */ + XMR_FS_COL_ERR = 1<<8, /* Bit 8: Collision Error */ + XMR_FS_CAR_ERR = 1<<7, /* Bit 7: Carrier Event Error */ + XMR_FS_LEN_ERR = 1<<6, /* Bit 6: In-Range Length Error */ + XMR_FS_FRA_ERR = 1<<5, /* Bit 5: Framing Error */ + XMR_FS_RUNT = 1<<4, /* Bit 4: Runt Frame */ + XMR_FS_LNG_ERR = 1<<3, /* Bit 3: Giant (Jumbo) Frame */ + XMR_FS_FCS_ERR = 1<<2, /* Bit 2: Frame Check Sequ Err */ + XMR_FS_ERR = 1<<1, /* Bit 1: Frame Error */ + XMR_FS_MCTRL = 1<<0, /* Bit 0: MAC Control Packet */ + +/* + * XMR_FS_ERR will be set if + * XMR_FS_FCS_ERR, XMR_FS_LNG_ERR, XMR_FS_RUNT, + * XMR_FS_FRA_ERR, XMR_FS_LEN_ERR, or XMR_FS_CEX_ERR + * is set. XMR_FS_LNG_ERR and XMR_FS_LEN_ERR will issue + * XMR_FS_ERR unless the corresponding bit in the Receive Command + * Register is set. + */ +}; + +/* +,* XMAC-PHY Registers, indirect addressed over the XMAC + */ +enum { + PHY_XMAC_CTRL = 0x00,/* 16 bit r/w PHY Control Register */ + PHY_XMAC_STAT = 0x01,/* 16 bit r/w PHY Status Register */ + PHY_XMAC_ID0 = 0x02,/* 16 bit r/o PHY ID0 Register */ + PHY_XMAC_ID1 = 0x03,/* 16 bit r/o PHY ID1 Register */ + PHY_XMAC_AUNE_ADV = 0x04,/* 16 bit r/w Auto-Neg. Advertisement */ + PHY_XMAC_AUNE_LP = 0x05,/* 16 bit r/o Link Partner Abi Reg */ + PHY_XMAC_AUNE_EXP = 0x06,/* 16 bit r/o Auto-Neg. Expansion Reg */ + PHY_XMAC_NEPG = 0x07,/* 16 bit r/w Next Page Register */ + PHY_XMAC_NEPG_LP = 0x08,/* 16 bit r/o Next Page Link Partner */ + + PHY_XMAC_EXT_STAT = 0x0f,/* 16 bit r/o Ext Status Register */ + PHY_XMAC_RES_ABI = 0x10,/* 16 bit r/o PHY Resolved Ability */ +}; +/* + * Broadcom-PHY Registers, indirect addressed over XMAC + */ +enum { + PHY_BCOM_CTRL = 0x00,/* 16 bit r/w PHY Control Register */ + PHY_BCOM_STAT = 0x01,/* 16 bit r/o PHY Status Register */ + PHY_BCOM_ID0 = 0x02,/* 16 bit r/o PHY ID0 Register */ + PHY_BCOM_ID1 = 0x03,/* 16 bit r/o PHY ID1 Register */ + PHY_BCOM_AUNE_ADV = 0x04,/* 16 bit r/w Auto-Neg. Advertisement */ + PHY_BCOM_AUNE_LP = 0x05,/* 16 bit r/o Link Part Ability Reg */ + PHY_BCOM_AUNE_EXP = 0x06,/* 16 bit r/o Auto-Neg. Expansion Reg */ + PHY_BCOM_NEPG = 0x07,/* 16 bit r/w Next Page Register */ + PHY_BCOM_NEPG_LP = 0x08,/* 16 bit r/o Next Page Link Partner */ + /* Broadcom-specific registers */ + PHY_BCOM_1000T_CTRL = 0x09,/* 16 bit r/w 1000Base-T Control Reg */ + PHY_BCOM_1000T_STAT = 0x0a,/* 16 bit r/o 1000Base-T Status Reg */ + PHY_BCOM_EXT_STAT = 0x0f,/* 16 bit r/o Extended Status Reg */ + PHY_BCOM_P_EXT_CTRL = 0x10,/* 16 bit r/w PHY Extended Ctrl Reg */ + PHY_BCOM_P_EXT_STAT = 0x11,/* 16 bit r/o PHY Extended Stat Reg */ + PHY_BCOM_RE_CTR = 0x12,/* 16 bit r/w Receive Error Counter */ + PHY_BCOM_FC_CTR = 0x13,/* 16 bit r/w False Carrier Sense Cnt */ + PHY_BCOM_RNO_CTR = 0x14,/* 16 bit r/w Receiver NOT_OK Cnt */ + + PHY_BCOM_AUX_CTRL = 0x18,/* 16 bit r/w Auxiliary Control Reg */ + PHY_BCOM_AUX_STAT = 0x19,/* 16 bit r/o Auxiliary Stat Summary */ + PHY_BCOM_INT_STAT = 0x1a,/* 16 bit r/o Interrupt Status Reg */ + PHY_BCOM_INT_MASK = 0x1b,/* 16 bit r/w Interrupt Mask Reg */ +}; + +/* + * Marvel-PHY Registers, indirect addressed over GMAC + */ +enum { + PHY_MARV_CTRL = 0x00,/* 16 bit r/w PHY Control Register */ + PHY_MARV_STAT = 0x01,/* 16 bit r/o PHY Status Register */ + PHY_MARV_ID0 = 0x02,/* 16 bit r/o PHY ID0 Register */ + PHY_MARV_ID1 = 0x03,/* 16 bit r/o PHY ID1 Register */ + PHY_MARV_AUNE_ADV = 0x04,/* 16 bit r/w Auto-Neg. Advertisement */ + PHY_MARV_AUNE_LP = 0x05,/* 16 bit r/o Link Part Ability Reg */ + PHY_MARV_AUNE_EXP = 0x06,/* 16 bit r/o Auto-Neg. Expansion Reg */ + PHY_MARV_NEPG = 0x07,/* 16 bit r/w Next Page Register */ + PHY_MARV_NEPG_LP = 0x08,/* 16 bit r/o Next Page Link Partner */ + /* Marvel-specific registers */ + PHY_MARV_1000T_CTRL = 0x09,/* 16 bit r/w 1000Base-T Control Reg */ + PHY_MARV_1000T_STAT = 0x0a,/* 16 bit r/o 1000Base-T Status Reg */ + PHY_MARV_EXT_STAT = 0x0f,/* 16 bit r/o Extended Status Reg */ + PHY_MARV_PHY_CTRL = 0x10,/* 16 bit r/w PHY Specific Ctrl Reg */ + PHY_MARV_PHY_STAT = 0x11,/* 16 bit r/o PHY Specific Stat Reg */ + PHY_MARV_INT_MASK = 0x12,/* 16 bit r/w Interrupt Mask Reg */ + PHY_MARV_INT_STAT = 0x13,/* 16 bit r/o Interrupt Status Reg */ + PHY_MARV_EXT_CTRL = 0x14,/* 16 bit r/w Ext. PHY Specific Ctrl */ + PHY_MARV_RXE_CNT = 0x15,/* 16 bit r/w Receive Error Counter */ + PHY_MARV_EXT_ADR = 0x16,/* 16 bit r/w Ext. Ad. for Cable Diag. */ + PHY_MARV_PORT_IRQ = 0x17,/* 16 bit r/o Port 0 IRQ (88E1111 only) */ + PHY_MARV_LED_CTRL = 0x18,/* 16 bit r/w LED Control Reg */ + PHY_MARV_LED_OVER = 0x19,/* 16 bit r/w Manual LED Override Reg */ + PHY_MARV_EXT_CTRL_2 = 0x1a,/* 16 bit r/w Ext. PHY Specific Ctrl 2 */ + PHY_MARV_EXT_P_STAT = 0x1b,/* 16 bit r/w Ext. PHY Spec. Stat Reg */ + PHY_MARV_CABLE_DIAG = 0x1c,/* 16 bit r/o Cable Diagnostic Reg */ + PHY_MARV_PAGE_ADDR = 0x1d,/* 16 bit r/w Extended Page Address Reg */ + PHY_MARV_PAGE_DATA = 0x1e,/* 16 bit r/w Extended Page Data Reg */ + +/* for 10/100 Fast Ethernet PHY (88E3082 only) */ + PHY_MARV_FE_LED_PAR = 0x16,/* 16 bit r/w LED Parallel Select Reg. */ + PHY_MARV_FE_LED_SER = 0x17,/* 16 bit r/w LED Stream Select S. LED */ + PHY_MARV_FE_VCT_TX = 0x1a,/* 16 bit r/w VCT Reg. for TXP/N Pins */ + PHY_MARV_FE_VCT_RX = 0x1b,/* 16 bit r/o VCT Reg. for RXP/N Pins */ + PHY_MARV_FE_SPEC_2 = 0x1c,/* 16 bit r/w Specific Control Reg. 2 */ +}; + +/* Level One-PHY Registers, indirect addressed over XMAC */ +enum { + PHY_LONE_CTRL = 0x00,/* 16 bit r/w PHY Control Register */ + PHY_LONE_STAT = 0x01,/* 16 bit r/o PHY Status Register */ + PHY_LONE_ID0 = 0x02,/* 16 bit r/o PHY ID0 Register */ + PHY_LONE_ID1 = 0x03,/* 16 bit r/o PHY ID1 Register */ + PHY_LONE_AUNE_ADV = 0x04,/* 16 bit r/w Auto-Neg. Advertisement */ + PHY_LONE_AUNE_LP = 0x05,/* 16 bit r/o Link Part Ability Reg */ + PHY_LONE_AUNE_EXP = 0x06,/* 16 bit r/o Auto-Neg. Expansion Reg */ + PHY_LONE_NEPG = 0x07,/* 16 bit r/w Next Page Register */ + PHY_LONE_NEPG_LP = 0x08,/* 16 bit r/o Next Page Link Partner */ + /* Level One-specific registers */ + PHY_LONE_1000T_CTRL = 0x09,/* 16 bit r/w 1000Base-T Control Reg */ + PHY_LONE_1000T_STAT = 0x0a,/* 16 bit r/o 1000Base-T Status Reg */ + PHY_LONE_EXT_STAT = 0x0f,/* 16 bit r/o Extended Status Reg */ + PHY_LONE_PORT_CFG = 0x10,/* 16 bit r/w Port Configuration Reg*/ + PHY_LONE_Q_STAT = 0x11,/* 16 bit r/o Quick Status Reg */ + PHY_LONE_INT_ENAB = 0x12,/* 16 bit r/w Interrupt Enable Reg */ + PHY_LONE_INT_STAT = 0x13,/* 16 bit r/o Interrupt Status Reg */ + PHY_LONE_LED_CFG = 0x14,/* 16 bit r/w LED Configuration Reg */ + PHY_LONE_PORT_CTRL = 0x15,/* 16 bit r/w Port Control Reg */ + PHY_LONE_CIM = 0x16,/* 16 bit r/o CIM Reg */ +}; + +/* National-PHY Registers, indirect addressed over XMAC */ +enum { + PHY_NAT_CTRL = 0x00,/* 16 bit r/w PHY Control Register */ + PHY_NAT_STAT = 0x01,/* 16 bit r/w PHY Status Register */ + PHY_NAT_ID0 = 0x02,/* 16 bit r/o PHY ID0 Register */ + PHY_NAT_ID1 = 0x03,/* 16 bit r/o PHY ID1 Register */ + PHY_NAT_AUNE_ADV = 0x04,/* 16 bit r/w Auto-Neg. Advertisement */ + PHY_NAT_AUNE_LP = 0x05,/* 16 bit r/o Link Partner Ability Reg */ + PHY_NAT_AUNE_EXP = 0x06,/* 16 bit r/o Auto-Neg. Expansion Reg */ + PHY_NAT_NEPG = 0x07,/* 16 bit r/w Next Page Register */ + PHY_NAT_NEPG_LP = 0x08,/* 16 bit r/o Next Page Link Partner Reg */ + /* National-specific registers */ + PHY_NAT_1000T_CTRL = 0x09,/* 16 bit r/w 1000Base-T Control Reg */ + PHY_NAT_1000T_STAT = 0x0a,/* 16 bit r/o 1000Base-T Status Reg */ + PHY_NAT_EXT_STAT = 0x0f,/* 16 bit r/o Extended Status Register */ + PHY_NAT_EXT_CTRL1 = 0x10,/* 16 bit r/o Extended Control Reg1 */ + PHY_NAT_Q_STAT1 = 0x11,/* 16 bit r/o Quick Status Reg1 */ + PHY_NAT_10B_OP = 0x12,/* 16 bit r/o 10Base-T Operations Reg */ + PHY_NAT_EXT_CTRL2 = 0x13,/* 16 bit r/o Extended Control Reg1 */ + PHY_NAT_Q_STAT2 = 0x14,/* 16 bit r/o Quick Status Reg2 */ + + PHY_NAT_PHY_ADDR = 0x19,/* 16 bit r/o PHY Address Register */ +}; + +enum { + PHY_CT_RESET = 1<<15, /* Bit 15: (sc) clear all PHY related regs */ + PHY_CT_LOOP = 1<<14, /* Bit 14: enable Loopback over PHY */ + PHY_CT_SPS_LSB = 1<<13, /* Bit 13: Speed select, lower bit */ + PHY_CT_ANE = 1<<12, /* Bit 12: Auto-Negotiation Enabled */ + PHY_CT_PDOWN = 1<<11, /* Bit 11: Power Down Mode */ + PHY_CT_ISOL = 1<<10, /* Bit 10: Isolate Mode */ + PHY_CT_RE_CFG = 1<<9, /* Bit 9: (sc) Restart Auto-Negotiation */ + PHY_CT_DUP_MD = 1<<8, /* Bit 8: Duplex Mode */ + PHY_CT_COL_TST = 1<<7, /* Bit 7: Collision Test enabled */ + PHY_CT_SPS_MSB = 1<<6, /* Bit 6: Speed select, upper bit */ +}; + +enum { + PHY_CT_SP1000 = PHY_CT_SPS_MSB, /* enable speed of 1000 Mbps */ + PHY_CT_SP100 = PHY_CT_SPS_LSB, /* enable speed of 100 Mbps */ + PHY_CT_SP10 = 0, /* enable speed of 10 Mbps */ +}; + +enum { + PHY_ST_EXT_ST = 1<<8, /* Bit 8: Extended Status Present */ + + PHY_ST_PRE_SUP = 1<<6, /* Bit 6: Preamble Suppression */ + PHY_ST_AN_OVER = 1<<5, /* Bit 5: Auto-Negotiation Over */ + PHY_ST_REM_FLT = 1<<4, /* Bit 4: Remote Fault Condition Occured */ + PHY_ST_AN_CAP = 1<<3, /* Bit 3: Auto-Negotiation Capability */ + PHY_ST_LSYNC = 1<<2, /* Bit 2: Link Synchronized */ + PHY_ST_JAB_DET = 1<<1, /* Bit 1: Jabber Detected */ + PHY_ST_EXT_REG = 1<<0, /* Bit 0: Extended Register available */ +}; + +enum { + PHY_I1_OUI_MSK = 0x3f<<10, /* Bit 15..10: Organization Unique ID */ + PHY_I1_MOD_NUM = 0x3f<<4, /* Bit 9.. 4: Model Number */ + PHY_I1_REV_MSK = 0xf, /* Bit 3.. 0: Revision Number */ +}; + +/* different Broadcom PHY Ids */ +enum { + PHY_BCOM_ID1_A1 = 0x6041, + PHY_BCOM_ID1_B2 = 0x6043, + PHY_BCOM_ID1_C0 = 0x6044, + PHY_BCOM_ID1_C5 = 0x6047, +}; + +/* different Marvell PHY Ids */ +enum { + PHY_MARV_ID0_VAL= 0x0141, /* Marvell Unique Identifier */ + PHY_MARV_ID1_B0 = 0x0C23, /* Yukon (PHY 88E1011) */ + PHY_MARV_ID1_B2 = 0x0C25, /* Yukon-Plus (PHY 88E1011) */ + PHY_MARV_ID1_C2 = 0x0CC2, /* Yukon-EC (PHY 88E1111) */ + PHY_MARV_ID1_Y2 = 0x0C91, /* Yukon-2 (PHY 88E1112) */ +}; + +enum { + PHY_AN_NXT_PG = 1<<15, /* Bit 15: Request Next Page */ + PHY_X_AN_ACK = 1<<14, /* Bit 14: (ro) Acknowledge Received */ + PHY_X_AN_RFB = 3<<12,/* Bit 13..12: Remote Fault Bits */ + + PHY_X_AN_PAUSE = 3<<7,/* Bit 8.. 7: Pause Bits */ + PHY_X_AN_HD = 1<<6, /* Bit 6: Half Duplex */ + PHY_X_AN_FD = 1<<5, /* Bit 5: Full Duplex */ +}; + +enum { + PHY_B_AN_RF = 1<<13, /* Bit 13: Remote Fault */ + + PHY_B_AN_ASP = 1<<11, /* Bit 11: Asymmetric Pause */ + PHY_B_AN_PC = 1<<10, /* Bit 10: Pause Capable */ + PHY_B_AN_SEL = 0x1f, /* Bit 4..0: Selector Field, 00001=Ethernet*/ +}; + +enum { + PHY_L_AN_RF = 1<<13, /* Bit 13: Remote Fault */ + /* Bit 12: reserved */ + PHY_L_AN_ASP = 1<<11, /* Bit 11: Asymmetric Pause */ + PHY_L_AN_PC = 1<<10, /* Bit 10: Pause Capable */ + + PHY_L_AN_SEL = 0x1f, /* Bit 4..0: Selector Field, 00001=Ethernet*/ +}; + +/* PHY_NAT_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement */ +/* PHY_NAT_AUNE_LP 16 bit r/o Link Partner Ability Reg *****/ +/* PHY_AN_NXT_PG (see XMAC) Bit 15: Request Next Page */ +enum { + PHY_N_AN_RF = 1<<13, /* Bit 13: Remote Fault */ + + PHY_N_AN_100F = 1<<11, /* Bit 11: 100Base-T2 FD Support */ + PHY_N_AN_100H = 1<<10, /* Bit 10: 100Base-T2 HD Support */ + + PHY_N_AN_SEL = 0x1f, /* Bit 4..0: Selector Field, 00001=Ethernet*/ +}; + +/* field type definition for PHY_x_AN_SEL */ +enum { + PHY_SEL_TYPE = 1, /* 00001 = Ethernet */ +}; + +enum { + PHY_ANE_LP_NP = 1<<3, /* Bit 3: Link Partner can Next Page */ + PHY_ANE_LOC_NP = 1<<2, /* Bit 2: Local PHY can Next Page */ + PHY_ANE_RX_PG = 1<<1, /* Bit 1: Page Received */ +}; + +enum { + PHY_ANE_PAR_DF = 1<<4, /* Bit 4: Parallel Detection Fault */ + + PHY_ANE_LP_CAP = 1<<0, /* Bit 0: Link Partner Auto-Neg. Cap. */ +}; + +enum { + PHY_NP_MORE = 1<<15, /* Bit 15: More, Next Pages to follow */ + PHY_NP_ACK1 = 1<<14, /* Bit 14: (ro) Ack1, for receiving a message */ + PHY_NP_MSG_VAL = 1<<13, /* Bit 13: Message Page valid */ + PHY_NP_ACK2 = 1<<12, /* Bit 12: Ack2, comply with msg content */ + PHY_NP_TOG = 1<<11, /* Bit 11: Toggle Bit, ensure sync */ + PHY_NP_MSG = 0x07ff, /* Bit 10..0: Message from/to Link Partner */ +}; + +enum { + PHY_X_EX_FD = 1<<15, /* Bit 15: Device Supports Full Duplex */ + PHY_X_EX_HD = 1<<14, /* Bit 14: Device Supports Half Duplex */ +}; + +enum { + PHY_X_RS_PAUSE = 3<<7,/* Bit 8..7: selected Pause Mode */ + PHY_X_RS_HD = 1<<6, /* Bit 6: Half Duplex Mode selected */ + PHY_X_RS_FD = 1<<5, /* Bit 5: Full Duplex Mode selected */ + PHY_X_RS_ABLMIS = 1<<4, /* Bit 4: duplex or pause cap mismatch */ + PHY_X_RS_PAUMIS = 1<<3, /* Bit 3: pause capability mismatch */ +}; + +/** Remote Fault Bits (PHY_X_AN_RFB) encoding */ +enum { + X_RFB_OK = 0<<12,/* Bit 13..12 No errors, Link OK */ + X_RFB_LF = 1<<12, /* Bit 13..12 Link Failure */ + X_RFB_OFF = 2<<12,/* Bit 13..12 Offline */ + X_RFB_AN_ERR = 3<<12,/* Bit 13..12 Auto-Negotiation Error */ +}; + +/* Pause Bits (PHY_X_AN_PAUSE and PHY_X_RS_PAUSE) encoding */ +enum { + PHY_X_P_NO_PAUSE = 0<<7,/* Bit 8..7: no Pause Mode */ + PHY_X_P_SYM_MD = 1<<7, /* Bit 8..7: symmetric Pause Mode */ + PHY_X_P_ASYM_MD = 2<<7,/* Bit 8..7: asymmetric Pause Mode */ + PHY_X_P_BOTH_MD = 3<<7,/* Bit 8..7: both Pause Mode */ +}; + + +/* Broadcom-Specific */ +/***** PHY_BCOM_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/ +enum { + PHY_B_1000C_TEST = 7<<13,/* Bit 15..13: Test Modes */ + PHY_B_1000C_MSE = 1<<12, /* Bit 12: Master/Slave Enable */ + PHY_B_1000C_MSC = 1<<11, /* Bit 11: M/S Configuration */ + PHY_B_1000C_RD = 1<<10, /* Bit 10: Repeater/DTE */ + PHY_B_1000C_AFD = 1<<9, /* Bit 9: Advertise Full Duplex */ + PHY_B_1000C_AHD = 1<<8, /* Bit 8: Advertise Half Duplex */ +}; + +/***** PHY_BCOM_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/ +/***** PHY_MARV_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/ +enum { + PHY_B_1000S_MSF = 1<<15, /* Bit 15: Master/Slave Fault */ + PHY_B_1000S_MSR = 1<<14, /* Bit 14: Master/Slave Result */ + PHY_B_1000S_LRS = 1<<13, /* Bit 13: Local Receiver Status */ + PHY_B_1000S_RRS = 1<<12, /* Bit 12: Remote Receiver Status */ + PHY_B_1000S_LP_FD = 1<<11, /* Bit 11: Link Partner can FD */ + PHY_B_1000S_LP_HD = 1<<10, /* Bit 10: Link Partner can HD */ + /* Bit 9..8: reserved */ + PHY_B_1000S_IEC = 0xff, /* Bit 7..0: Idle Error Count */ +}; + +/***** PHY_BCOM_EXT_STAT 16 bit r/o Extended Status Register *****/ +enum { + PHY_B_ES_X_FD_CAP = 1<<15, /* Bit 15: 1000Base-X FD capable */ + PHY_B_ES_X_HD_CAP = 1<<14, /* Bit 14: 1000Base-X HD capable */ + PHY_B_ES_T_FD_CAP = 1<<13, /* Bit 13: 1000Base-T FD capable */ + PHY_B_ES_T_HD_CAP = 1<<12, /* Bit 12: 1000Base-T HD capable */ +}; + +/***** PHY_BCOM_P_EXT_CTRL 16 bit r/w PHY Extended Control Reg *****/ +enum { + PHY_B_PEC_MAC_PHY = 1<<15, /* Bit 15: 10BIT/GMI-Interface */ + PHY_B_PEC_DIS_CROSS = 1<<14, /* Bit 14: Disable MDI Crossover */ + PHY_B_PEC_TX_DIS = 1<<13, /* Bit 13: Tx output Disabled */ + PHY_B_PEC_INT_DIS = 1<<12, /* Bit 12: Interrupts Disabled */ + PHY_B_PEC_F_INT = 1<<11, /* Bit 11: Force Interrupt */ + PHY_B_PEC_BY_45 = 1<<10, /* Bit 10: Bypass 4B5B-Decoder */ + PHY_B_PEC_BY_SCR = 1<<9, /* Bit 9: Bypass Scrambler */ + PHY_B_PEC_BY_MLT3 = 1<<8, /* Bit 8: Bypass MLT3 Encoder */ + PHY_B_PEC_BY_RXA = 1<<7, /* Bit 7: Bypass Rx Alignm. */ + PHY_B_PEC_RES_SCR = 1<<6, /* Bit 6: Reset Scrambler */ + PHY_B_PEC_EN_LTR = 1<<5, /* Bit 5: Ena LED Traffic Mode */ + PHY_B_PEC_LED_ON = 1<<4, /* Bit 4: Force LED's on */ + PHY_B_PEC_LED_OFF = 1<<3, /* Bit 3: Force LED's off */ + PHY_B_PEC_EX_IPG = 1<<2, /* Bit 2: Extend Tx IPG Mode */ + PHY_B_PEC_3_LED = 1<<1, /* Bit 1: Three Link LED mode */ + PHY_B_PEC_HIGH_LA = 1<<0, /* Bit 0: GMII FIFO Elasticy */ +}; + +/***** PHY_BCOM_P_EXT_STAT 16 bit r/o PHY Extended Status Reg *****/ +enum { + PHY_B_PES_CROSS_STAT = 1<<13, /* Bit 13: MDI Crossover Status */ + PHY_B_PES_INT_STAT = 1<<12, /* Bit 12: Interrupt Status */ + PHY_B_PES_RRS = 1<<11, /* Bit 11: Remote Receiver Stat. */ + PHY_B_PES_LRS = 1<<10, /* Bit 10: Local Receiver Stat. */ + PHY_B_PES_LOCKED = 1<<9, /* Bit 9: Locked */ + PHY_B_PES_LS = 1<<8, /* Bit 8: Link Status */ + PHY_B_PES_RF = 1<<7, /* Bit 7: Remote Fault */ + PHY_B_PES_CE_ER = 1<<6, /* Bit 6: Carrier Ext Error */ + PHY_B_PES_BAD_SSD = 1<<5, /* Bit 5: Bad SSD */ + PHY_B_PES_BAD_ESD = 1<<4, /* Bit 4: Bad ESD */ + PHY_B_PES_RX_ER = 1<<3, /* Bit 3: Receive Error */ + PHY_B_PES_TX_ER = 1<<2, /* Bit 2: Transmit Error */ + PHY_B_PES_LOCK_ER = 1<<1, /* Bit 1: Lock Error */ + PHY_B_PES_MLT3_ER = 1<<0, /* Bit 0: MLT3 code Error */ +}; + +/***** PHY_BCOM_FC_CTR 16 bit r/w False Carrier Counter *****/ +enum { + PHY_B_FC_CTR = 0xff, /* Bit 7..0: False Carrier Counter */ + +/***** PHY_BCOM_RNO_CTR 16 bit r/w Receive NOT_OK Counter *****/ + PHY_B_RC_LOC_MSK = 0xff00, /* Bit 15..8: Local Rx NOT_OK cnt */ + PHY_B_RC_REM_MSK = 0x00ff, /* Bit 7..0: Remote Rx NOT_OK cnt */ + +/***** PHY_BCOM_AUX_CTRL 16 bit r/w Auxiliary Control Reg *****/ + PHY_B_AC_L_SQE = 1<<15, /* Bit 15: Low Squelch */ + PHY_B_AC_LONG_PACK = 1<<14, /* Bit 14: Rx Long Packets */ + PHY_B_AC_ER_CTRL = 3<<12,/* Bit 13..12: Edgerate Control */ + /* Bit 11: reserved */ + PHY_B_AC_TX_TST = 1<<10, /* Bit 10: Tx test bit, always 1 */ + /* Bit 9.. 8: reserved */ + PHY_B_AC_DIS_PRF = 1<<7, /* Bit 7: dis part resp filter */ + /* Bit 6: reserved */ + PHY_B_AC_DIS_PM = 1<<5, /* Bit 5: dis power management */ + /* Bit 4: reserved */ + PHY_B_AC_DIAG = 1<<3, /* Bit 3: Diagnostic Mode */ +}; + +/***** PHY_BCOM_AUX_STAT 16 bit r/o Auxiliary Status Reg *****/ +enum { + PHY_B_AS_AN_C = 1<<15, /* Bit 15: AutoNeg complete */ + PHY_B_AS_AN_CA = 1<<14, /* Bit 14: AN Complete Ack */ + PHY_B_AS_ANACK_D = 1<<13, /* Bit 13: AN Ack Detect */ + PHY_B_AS_ANAB_D = 1<<12, /* Bit 12: AN Ability Detect */ + PHY_B_AS_NPW = 1<<11, /* Bit 11: AN Next Page Wait */ + PHY_B_AS_AN_RES_MSK = 7<<8,/* Bit 10..8: AN HDC */ + PHY_B_AS_PDF = 1<<7, /* Bit 7: Parallel Detect. Fault */ + PHY_B_AS_RF = 1<<6, /* Bit 6: Remote Fault */ + PHY_B_AS_ANP_R = 1<<5, /* Bit 5: AN Page Received */ + PHY_B_AS_LP_ANAB = 1<<4, /* Bit 4: LP AN Ability */ + PHY_B_AS_LP_NPAB = 1<<3, /* Bit 3: LP Next Page Ability */ + PHY_B_AS_LS = 1<<2, /* Bit 2: Link Status */ + PHY_B_AS_PRR = 1<<1, /* Bit 1: Pause Resolution-Rx */ + PHY_B_AS_PRT = 1<<0, /* Bit 0: Pause Resolution-Tx */ +}; +#define PHY_B_AS_PAUSE_MSK (PHY_B_AS_PRR | PHY_B_AS_PRT) + +/***** PHY_BCOM_INT_STAT 16 bit r/o Interrupt Status Reg *****/ +/***** PHY_BCOM_INT_MASK 16 bit r/w Interrupt Mask Reg *****/ +enum { + PHY_B_IS_PSE = 1<<14, /* Bit 14: Pair Swap Error */ + PHY_B_IS_MDXI_SC = 1<<13, /* Bit 13: MDIX Status Change */ + PHY_B_IS_HCT = 1<<12, /* Bit 12: counter above 32k */ + PHY_B_IS_LCT = 1<<11, /* Bit 11: counter above 128 */ + PHY_B_IS_AN_PR = 1<<10, /* Bit 10: Page Received */ + PHY_B_IS_NO_HDCL = 1<<9, /* Bit 9: No HCD Link */ + PHY_B_IS_NO_HDC = 1<<8, /* Bit 8: No HCD */ + PHY_B_IS_NEG_USHDC = 1<<7, /* Bit 7: Negotiated Unsup. HCD */ + PHY_B_IS_SCR_S_ER = 1<<6, /* Bit 6: Scrambler Sync Error */ + PHY_B_IS_RRS_CHANGE = 1<<5, /* Bit 5: Remote Rx Stat Change */ + PHY_B_IS_LRS_CHANGE = 1<<4, /* Bit 4: Local Rx Stat Change */ + PHY_B_IS_DUP_CHANGE = 1<<3, /* Bit 3: Duplex Mode Change */ + PHY_B_IS_LSP_CHANGE = 1<<2, /* Bit 2: Link Speed Change */ + PHY_B_IS_LST_CHANGE = 1<<1, /* Bit 1: Link Status Changed */ + PHY_B_IS_CRC_ER = 1<<0, /* Bit 0: CRC Error */ +}; +#define PHY_B_DEF_MSK (~(PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE)) + +/* Pause Bits (PHY_B_AN_ASP and PHY_B_AN_PC) encoding */ +enum { + PHY_B_P_NO_PAUSE = 0<<10,/* Bit 11..10: no Pause Mode */ + PHY_B_P_SYM_MD = 1<<10, /* Bit 11..10: symmetric Pause Mode */ + PHY_B_P_ASYM_MD = 2<<10,/* Bit 11..10: asymmetric Pause Mode */ + PHY_B_P_BOTH_MD = 3<<10,/* Bit 11..10: both Pause Mode */ +}; +/* + * Resolved Duplex mode and Capabilities (Aux Status Summary Reg) + */ +enum { + PHY_B_RES_1000FD = 7<<8,/* Bit 10..8: 1000Base-T Full Dup. */ + PHY_B_RES_1000HD = 6<<8,/* Bit 10..8: 1000Base-T Half Dup. */ +}; + +/* + * Level One-Specific + */ +/***** PHY_LONE_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/ +enum { + PHY_L_1000C_TEST = 7<<13,/* Bit 15..13: Test Modes */ + PHY_L_1000C_MSE = 1<<12, /* Bit 12: Master/Slave Enable */ + PHY_L_1000C_MSC = 1<<11, /* Bit 11: M/S Configuration */ + PHY_L_1000C_RD = 1<<10, /* Bit 10: Repeater/DTE */ + PHY_L_1000C_AFD = 1<<9, /* Bit 9: Advertise Full Duplex */ + PHY_L_1000C_AHD = 1<<8, /* Bit 8: Advertise Half Duplex */ +}; + +/***** PHY_LONE_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/ +enum { + PHY_L_1000S_MSF = 1<<15, /* Bit 15: Master/Slave Fault */ + PHY_L_1000S_MSR = 1<<14, /* Bit 14: Master/Slave Result */ + PHY_L_1000S_LRS = 1<<13, /* Bit 13: Local Receiver Status */ + PHY_L_1000S_RRS = 1<<12, /* Bit 12: Remote Receiver Status */ + PHY_L_1000S_LP_FD = 1<<11, /* Bit 11: Link Partner can FD */ + PHY_L_1000S_LP_HD = 1<<10, /* Bit 10: Link Partner can HD */ + + PHY_L_1000S_IEC = 0xff, /* Bit 7..0: Idle Error Count */ + +/***** PHY_LONE_EXT_STAT 16 bit r/o Extended Status Register *****/ + PHY_L_ES_X_FD_CAP = 1<<15, /* Bit 15: 1000Base-X FD capable */ + PHY_L_ES_X_HD_CAP = 1<<14, /* Bit 14: 1000Base-X HD capable */ + PHY_L_ES_T_FD_CAP = 1<<13, /* Bit 13: 1000Base-T FD capable */ + PHY_L_ES_T_HD_CAP = 1<<12, /* Bit 12: 1000Base-T HD capable */ +}; + +/***** PHY_LONE_PORT_CFG 16 bit r/w Port Configuration Reg *****/ +enum { + PHY_L_PC_REP_MODE = 1<<15, /* Bit 15: Repeater Mode */ + + PHY_L_PC_TX_DIS = 1<<13, /* Bit 13: Tx output Disabled */ + PHY_L_PC_BY_SCR = 1<<12, /* Bit 12: Bypass Scrambler */ + PHY_L_PC_BY_45 = 1<<11, /* Bit 11: Bypass 4B5B-Decoder */ + PHY_L_PC_JAB_DIS = 1<<10, /* Bit 10: Jabber Disabled */ + PHY_L_PC_SQE = 1<<9, /* Bit 9: Enable Heartbeat */ + PHY_L_PC_TP_LOOP = 1<<8, /* Bit 8: TP Loopback */ + PHY_L_PC_SSS = 1<<7, /* Bit 7: Smart Speed Selection */ + PHY_L_PC_FIFO_SIZE = 1<<6, /* Bit 6: FIFO Size */ + PHY_L_PC_PRE_EN = 1<<5, /* Bit 5: Preamble Enable */ + PHY_L_PC_CIM = 1<<4, /* Bit 4: Carrier Integrity Mon */ + PHY_L_PC_10_SER = 1<<3, /* Bit 3: Use Serial Output */ + PHY_L_PC_ANISOL = 1<<2, /* Bit 2: Unisolate Port */ + PHY_L_PC_TEN_BIT = 1<<1, /* Bit 1: 10bit iface mode on */ + PHY_L_PC_ALTCLOCK = 1<<0, /* Bit 0: (ro) ALTCLOCK Mode on */ +}; + +/***** PHY_LONE_Q_STAT 16 bit r/o Quick Status Reg *****/ +enum { + PHY_L_QS_D_RATE = 3<<14,/* Bit 15..14: Data Rate */ + PHY_L_QS_TX_STAT = 1<<13, /* Bit 13: Transmitting */ + PHY_L_QS_RX_STAT = 1<<12, /* Bit 12: Receiving */ + PHY_L_QS_COL_STAT = 1<<11, /* Bit 11: Collision */ + PHY_L_QS_L_STAT = 1<<10, /* Bit 10: Link is up */ + PHY_L_QS_DUP_MOD = 1<<9, /* Bit 9: Full/Half Duplex */ + PHY_L_QS_AN = 1<<8, /* Bit 8: AutoNeg is On */ + PHY_L_QS_AN_C = 1<<7, /* Bit 7: AN is Complete */ + PHY_L_QS_LLE = 7<<4,/* Bit 6..4: Line Length Estim. */ + PHY_L_QS_PAUSE = 1<<3, /* Bit 3: LP advertised Pause */ + PHY_L_QS_AS_PAUSE = 1<<2, /* Bit 2: LP adv. asym. Pause */ + PHY_L_QS_ISOLATE = 1<<1, /* Bit 1: CIM Isolated */ + PHY_L_QS_EVENT = 1<<0, /* Bit 0: Event has occurred */ +}; + +/***** PHY_LONE_INT_ENAB 16 bit r/w Interrupt Enable Reg *****/ +/***** PHY_LONE_INT_STAT 16 bit r/o Interrupt Status Reg *****/ +enum { + PHY_L_IS_AN_F = 1<<13, /* Bit 13: Auto-Negotiation fault */ + PHY_L_IS_CROSS = 1<<11, /* Bit 11: Crossover used */ + PHY_L_IS_POL = 1<<10, /* Bit 10: Polarity correct. used */ + PHY_L_IS_SS = 1<<9, /* Bit 9: Smart Speed Downgrade */ + PHY_L_IS_CFULL = 1<<8, /* Bit 8: Counter Full */ + PHY_L_IS_AN_C = 1<<7, /* Bit 7: AutoNeg Complete */ + PHY_L_IS_SPEED = 1<<6, /* Bit 6: Speed Changed */ + PHY_L_IS_DUP = 1<<5, /* Bit 5: Duplex Changed */ + PHY_L_IS_LS = 1<<4, /* Bit 4: Link Status Changed */ + PHY_L_IS_ISOL = 1<<3, /* Bit 3: Isolate Occured */ + PHY_L_IS_MDINT = 1<<2, /* Bit 2: (ro) STAT: MII Int Pending */ + PHY_L_IS_INTEN = 1<<1, /* Bit 1: ENAB: Enable IRQs */ + PHY_L_IS_FORCE = 1<<0, /* Bit 0: ENAB: Force Interrupt */ +}; + +/* int. mask */ +#define PHY_L_DEF_MSK (PHY_L_IS_LS | PHY_L_IS_ISOL | PHY_L_IS_INTEN) + +/***** PHY_LONE_LED_CFG 16 bit r/w LED Configuration Reg *****/ +enum { + PHY_L_LC_LEDC = 3<<14,/* Bit 15..14: Col/Blink/On/Off */ + PHY_L_LC_LEDR = 3<<12,/* Bit 13..12: Rx/Blink/On/Off */ + PHY_L_LC_LEDT = 3<<10,/* Bit 11..10: Tx/Blink/On/Off */ + PHY_L_LC_LEDG = 3<<8,/* Bit 9..8: Giga/Blink/On/Off */ + PHY_L_LC_LEDS = 3<<6,/* Bit 7..6: 10-100/Blink/On/Off */ + PHY_L_LC_LEDL = 3<<4,/* Bit 5..4: Link/Blink/On/Off */ + PHY_L_LC_LEDF = 3<<2,/* Bit 3..2: Duplex/Blink/On/Off */ + PHY_L_LC_PSTRECH= 1<<1, /* Bit 1: Strech LED Pulses */ + PHY_L_LC_FREQ = 1<<0, /* Bit 0: 30/100 ms */ +}; + +/***** PHY_LONE_PORT_CTRL 16 bit r/w Port Control Reg *****/ +enum { + PHY_L_PC_TX_TCLK = 1<<15, /* Bit 15: Enable TX_TCLK */ + PHY_L_PC_ALT_NP = 1<<13, /* Bit 14: Alternate Next Page */ + PHY_L_PC_GMII_ALT= 1<<12, /* Bit 13: Alternate GMII driver */ + PHY_L_PC_TEN_CRS = 1<<10, /* Bit 10: Extend CRS*/ +}; + +/***** PHY_LONE_CIM 16 bit r/o CIM Reg *****/ +enum { + PHY_L_CIM_ISOL = 0xff<<8,/* Bit 15..8: Isolate Count */ + PHY_L_CIM_FALSE_CAR = 0xff, /* Bit 7..0: False Carrier Count */ +}; + +/* + * Pause Bits (PHY_L_AN_ASP and PHY_L_AN_PC) encoding + */ +enum { + PHY_L_P_NO_PAUSE= 0<<10,/* Bit 11..10: no Pause Mode */ + PHY_L_P_SYM_MD = 1<<10, /* Bit 11..10: symmetric Pause Mode */ + PHY_L_P_ASYM_MD = 2<<10,/* Bit 11..10: asymmetric Pause Mode */ + PHY_L_P_BOTH_MD = 3<<10,/* Bit 11..10: both Pause Mode */ +}; + +/* + * National-Specific + */ +/***** PHY_NAT_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/ +enum { + PHY_N_1000C_TEST= 7<<13,/* Bit 15..13: Test Modes */ + PHY_N_1000C_MSE = 1<<12, /* Bit 12: Master/Slave Enable */ + PHY_N_1000C_MSC = 1<<11, /* Bit 11: M/S Configuration */ + PHY_N_1000C_RD = 1<<10, /* Bit 10: Repeater/DTE */ + PHY_N_1000C_AFD = 1<<9, /* Bit 9: Advertise Full Duplex */ + PHY_N_1000C_AHD = 1<<8, /* Bit 8: Advertise Half Duplex */ + PHY_N_1000C_APC = 1<<7, /* Bit 7: Asymmetric Pause Cap. */}; + + +/***** PHY_NAT_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/ +enum { + PHY_N_1000S_MSF = 1<<15, /* Bit 15: Master/Slave Fault */ + PHY_N_1000S_MSR = 1<<14, /* Bit 14: Master/Slave Result */ + PHY_N_1000S_LRS = 1<<13, /* Bit 13: Local Receiver Status */ + PHY_N_1000S_RRS = 1<<12, /* Bit 12: Remote Receiver Status*/ + PHY_N_1000S_LP_FD= 1<<11, /* Bit 11: Link Partner can FD */ + PHY_N_1000S_LP_HD= 1<<10, /* Bit 10: Link Partner can HD */ + PHY_N_1000C_LP_APC= 1<<9, /* Bit 9: LP Asym. Pause Cap. */ + PHY_N_1000S_IEC = 0xff, /* Bit 7..0: Idle Error Count */ +}; + +/***** PHY_NAT_EXT_STAT 16 bit r/o Extended Status Register *****/ +enum { + PHY_N_ES_X_FD_CAP= 1<<15, /* Bit 15: 1000Base-X FD capable */ + PHY_N_ES_X_HD_CAP= 1<<14, /* Bit 14: 1000Base-X HD capable */ + PHY_N_ES_T_FD_CAP= 1<<13, /* Bit 13: 1000Base-T FD capable */ + PHY_N_ES_T_HD_CAP= 1<<12, /* Bit 12: 1000Base-T HD capable */ +}; + +/** Marvell-Specific */ +enum { + PHY_M_AN_NXT_PG = 1<<15, /* Request Next Page */ + PHY_M_AN_ACK = 1<<14, /* (ro) Acknowledge Received */ + PHY_M_AN_RF = 1<<13, /* Remote Fault */ + + PHY_M_AN_ASP = 1<<11, /* Asymmetric Pause */ + PHY_M_AN_PC = 1<<10, /* MAC Pause implemented */ + PHY_M_AN_100_T4 = 1<<9, /* Not cap. 100Base-T4 (always 0) */ + PHY_M_AN_100_FD = 1<<8, /* Advertise 100Base-TX Full Duplex */ + PHY_M_AN_100_HD = 1<<7, /* Advertise 100Base-TX Half Duplex */ + PHY_M_AN_10_FD = 1<<6, /* Advertise 10Base-TX Full Duplex */ + PHY_M_AN_10_HD = 1<<5, /* Advertise 10Base-TX Half Duplex */ + PHY_M_AN_SEL_MSK =0x1f<<4, /* Bit 4.. 0: Selector Field Mask */ +}; + +/* special defines for FIBER (88E1011S only) */ +enum { + PHY_M_AN_ASP_X = 1<<8, /* Asymmetric Pause */ + PHY_M_AN_PC_X = 1<<7, /* MAC Pause implemented */ + PHY_M_AN_1000X_AHD = 1<<6, /* Advertise 10000Base-X Half Duplex */ + PHY_M_AN_1000X_AFD = 1<<5, /* Advertise 10000Base-X Full Duplex */ +}; + +/* Pause Bits (PHY_M_AN_ASP_X and PHY_M_AN_PC_X) encoding */ +enum { + PHY_M_P_NO_PAUSE_X = 0<<7,/* Bit 8.. 7: no Pause Mode */ + PHY_M_P_SYM_MD_X = 1<<7, /* Bit 8.. 7: symmetric Pause Mode */ + PHY_M_P_ASYM_MD_X = 2<<7,/* Bit 8.. 7: asymmetric Pause Mode */ + PHY_M_P_BOTH_MD_X = 3<<7,/* Bit 8.. 7: both Pause Mode */ +}; + +/***** PHY_MARV_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/ +enum { + PHY_M_1000C_TEST = 7<<13,/* Bit 15..13: Test Modes */ + PHY_M_1000C_MSE = 1<<12, /* Manual Master/Slave Enable */ + PHY_M_1000C_MSC = 1<<11, /* M/S Configuration (1=Master) */ + PHY_M_1000C_MPD = 1<<10, /* Multi-Port Device */ + PHY_M_1000C_AFD = 1<<9, /* Advertise Full Duplex */ + PHY_M_1000C_AHD = 1<<8, /* Advertise Half Duplex */ +}; + +/***** PHY_MARV_PHY_CTRL 16 bit r/w PHY Specific Ctrl Reg *****/ +enum { + PHY_M_PC_TX_FFD_MSK = 3<<14,/* Bit 15..14: Tx FIFO Depth Mask */ + PHY_M_PC_RX_FFD_MSK = 3<<12,/* Bit 13..12: Rx FIFO Depth Mask */ + PHY_M_PC_ASS_CRS_TX = 1<<11, /* Assert CRS on Transmit */ + PHY_M_PC_FL_GOOD = 1<<10, /* Force Link Good */ + PHY_M_PC_EN_DET_MSK = 3<<8,/* Bit 9.. 8: Energy Detect Mask */ + PHY_M_PC_ENA_EXT_D = 1<<7, /* Enable Ext. Distance (10BT) */ + PHY_M_PC_MDIX_MSK = 3<<5,/* Bit 6.. 5: MDI/MDIX Config. Mask */ + PHY_M_PC_DIS_125CLK = 1<<4, /* Disable 125 CLK */ + PHY_M_PC_MAC_POW_UP = 1<<3, /* MAC Power up */ + PHY_M_PC_SQE_T_ENA = 1<<2, /* SQE Test Enabled */ + PHY_M_PC_POL_R_DIS = 1<<1, /* Polarity Reversal Disabled */ + PHY_M_PC_DIS_JABBER = 1<<0, /* Disable Jabber */ +}; + +enum { + PHY_M_PC_EN_DET = 2<<8, /* Energy Detect (Mode 1) */ + PHY_M_PC_EN_DET_PLUS = 3<<8, /* Energy Detect Plus (Mode 2) */ +}; + +#define PHY_M_PC_MDI_XMODE(x) (((x)<<5) & PHY_M_PC_MDIX_MSK) + +enum { + PHY_M_PC_MAN_MDI = 0, /* 00 = Manual MDI configuration */ + PHY_M_PC_MAN_MDIX = 1, /* 01 = Manual MDIX configuration */ + PHY_M_PC_ENA_AUTO = 3, /* 11 = Enable Automatic Crossover */ +}; + +/* for 10/100 Fast Ethernet PHY (88E3082 only) */ +enum { + PHY_M_PC_ENA_DTE_DT = 1<<15, /* Enable Data Terminal Equ. (DTE) Detect */ + PHY_M_PC_ENA_ENE_DT = 1<<14, /* Enable Energy Detect (sense & pulse) */ + PHY_M_PC_DIS_NLP_CK = 1<<13, /* Disable Normal Link Puls (NLP) Check */ + PHY_M_PC_ENA_LIP_NP = 1<<12, /* Enable Link Partner Next Page Reg. */ + PHY_M_PC_DIS_NLP_GN = 1<<11, /* Disable Normal Link Puls Generation */ + + PHY_M_PC_DIS_SCRAMB = 1<<9, /* Disable Scrambler */ + PHY_M_PC_DIS_FEFI = 1<<8, /* Disable Far End Fault Indic. (FEFI) */ + + PHY_M_PC_SH_TP_SEL = 1<<6, /* Shielded Twisted Pair Select */ + PHY_M_PC_RX_FD_MSK = 3<<2,/* Bit 3.. 2: Rx FIFO Depth Mask */ +}; + +/***** PHY_MARV_PHY_STAT 16 bit r/o PHY Specific Status Reg *****/ +enum { + PHY_M_PS_SPEED_MSK = 3<<14, /* Bit 15..14: Speed Mask */ + PHY_M_PS_SPEED_1000 = 1<<15, /* 10 = 1000 Mbps */ + PHY_M_PS_SPEED_100 = 1<<14, /* 01 = 100 Mbps */ + PHY_M_PS_SPEED_10 = 0, /* 00 = 10 Mbps */ + PHY_M_PS_FULL_DUP = 1<<13, /* Full Duplex */ + PHY_M_PS_PAGE_REC = 1<<12, /* Page Received */ + PHY_M_PS_SPDUP_RES = 1<<11, /* Speed & Duplex Resolved */ + PHY_M_PS_LINK_UP = 1<<10, /* Link Up */ + PHY_M_PS_CABLE_MSK = 7<<7, /* Bit 9.. 7: Cable Length Mask */ + PHY_M_PS_MDI_X_STAT = 1<<6, /* MDI Crossover Stat (1=MDIX) */ + PHY_M_PS_DOWNS_STAT = 1<<5, /* Downshift Status (1=downsh.) */ + PHY_M_PS_ENDET_STAT = 1<<4, /* Energy Detect Status (1=act) */ + PHY_M_PS_TX_P_EN = 1<<3, /* Tx Pause Enabled */ + PHY_M_PS_RX_P_EN = 1<<2, /* Rx Pause Enabled */ + PHY_M_PS_POL_REV = 1<<1, /* Polarity Reversed */ + PHY_M_PS_JABBER = 1<<0, /* Jabber */ +}; + +#define PHY_M_PS_PAUSE_MSK (PHY_M_PS_TX_P_EN | PHY_M_PS_RX_P_EN) + +/* for 10/100 Fast Ethernet PHY (88E3082 only) */ +enum { + PHY_M_PS_DTE_DETECT = 1<<15, /* Data Terminal Equipment (DTE) Detected */ + PHY_M_PS_RES_SPEED = 1<<14, /* Resolved Speed (1=100 Mbps, 0=10 Mbps */ +}; + +enum { + PHY_M_IS_AN_ERROR = 1<<15, /* Auto-Negotiation Error */ + PHY_M_IS_LSP_CHANGE = 1<<14, /* Link Speed Changed */ + PHY_M_IS_DUP_CHANGE = 1<<13, /* Duplex Mode Changed */ + PHY_M_IS_AN_PR = 1<<12, /* Page Received */ + PHY_M_IS_AN_COMPL = 1<<11, /* Auto-Negotiation Completed */ + PHY_M_IS_LST_CHANGE = 1<<10, /* Link Status Changed */ + PHY_M_IS_SYMB_ERROR = 1<<9, /* Symbol Error */ + PHY_M_IS_FALSE_CARR = 1<<8, /* False Carrier */ + PHY_M_IS_FIFO_ERROR = 1<<7, /* FIFO Overflow/Underrun Error */ + PHY_M_IS_MDI_CHANGE = 1<<6, /* MDI Crossover Changed */ + PHY_M_IS_DOWNSH_DET = 1<<5, /* Downshift Detected */ + PHY_M_IS_END_CHANGE = 1<<4, /* Energy Detect Changed */ + + PHY_M_IS_DTE_CHANGE = 1<<2, /* DTE Power Det. Status Changed */ + PHY_M_IS_POL_CHANGE = 1<<1, /* Polarity Changed */ + PHY_M_IS_JABBER = 1<<0, /* Jabber */ +}; + +#define PHY_M_DEF_MSK ( PHY_M_IS_AN_ERROR | PHY_M_IS_LSP_CHANGE | \ + PHY_M_IS_LST_CHANGE | PHY_M_IS_FIFO_ERROR) + +/***** PHY_MARV_EXT_CTRL 16 bit r/w Ext. PHY Specific Ctrl *****/ +enum { + PHY_M_EC_ENA_BC_EXT = 1<<15, /* Enable Block Carr. Ext. (88E1111 only) */ + PHY_M_EC_ENA_LIN_LB = 1<<14, /* Enable Line Loopback (88E1111 only) */ + + PHY_M_EC_DIS_LINK_P = 1<<12, /* Disable Link Pulses (88E1111 only) */ + PHY_M_EC_M_DSC_MSK = 3<<10, /* Bit 11..10: Master Downshift Counter */ + /* (88E1011 only) */ + PHY_M_EC_S_DSC_MSK = 3<<8,/* Bit 9.. 8: Slave Downshift Counter */ + /* (88E1011 only) */ + PHY_M_EC_M_DSC_MSK2 = 7<<9,/* Bit 11.. 9: Master Downshift Counter */ + /* (88E1111 only) */ + PHY_M_EC_DOWN_S_ENA = 1<<8, /* Downshift Enable (88E1111 only) */ + /* !!! Errata in spec. (1 = disable) */ + PHY_M_EC_RX_TIM_CT = 1<<7, /* RGMII Rx Timing Control*/ + PHY_M_EC_MAC_S_MSK = 7<<4,/* Bit 6.. 4: Def. MAC interface speed */ + PHY_M_EC_FIB_AN_ENA = 1<<3, /* Fiber Auto-Neg. Enable (88E1011S only) */ + PHY_M_EC_DTE_D_ENA = 1<<2, /* DTE Detect Enable (88E1111 only) */ + PHY_M_EC_TX_TIM_CT = 1<<1, /* RGMII Tx Timing Control */ + PHY_M_EC_TRANS_DIS = 1<<0, /* Transmitter Disable (88E1111 only) */}; + +#define PHY_M_EC_M_DSC(x) ((x)<<10) /* 00=1x; 01=2x; 10=3x; 11=4x */ +#define PHY_M_EC_S_DSC(x) ((x)<<8) /* 00=dis; 01=1x; 10=2x; 11=3x */ +#define PHY_M_EC_MAC_S(x) ((x)<<4) /* 01X=0; 110=2.5; 111=25 (MHz) */ + +#define PHY_M_EC_M_DSC_2(x) ((x)<<9) /* 000=1x; 001=2x; 010=3x; 011=4x */ + /* 100=5x; 101=6x; 110=7x; 111=8x */ +enum { + MAC_TX_CLK_0_MHZ = 2, + MAC_TX_CLK_2_5_MHZ = 6, + MAC_TX_CLK_25_MHZ = 7, +}; + +/***** PHY_MARV_LED_CTRL 16 bit r/w LED Control Reg *****/ +enum { + PHY_M_LEDC_DIS_LED = 1<<15, /* Disable LED */ + PHY_M_LEDC_PULS_MSK = 7<<12,/* Bit 14..12: Pulse Stretch Mask */ + PHY_M_LEDC_F_INT = 1<<11, /* Force Interrupt */ + PHY_M_LEDC_BL_R_MSK = 7<<8,/* Bit 10.. 8: Blink Rate Mask */ + PHY_M_LEDC_DP_C_LSB = 1<<7, /* Duplex Control (LSB, 88E1111 only) */ + PHY_M_LEDC_TX_C_LSB = 1<<6, /* Tx Control (LSB, 88E1111 only) */ + PHY_M_LEDC_LK_C_MSK = 7<<3,/* Bit 5.. 3: Link Control Mask */ + /* (88E1111 only) */ +}; + +enum { + PHY_M_LEDC_LINK_MSK = 3<<3,/* Bit 4.. 3: Link Control Mask */ + /* (88E1011 only) */ + PHY_M_LEDC_DP_CTRL = 1<<2, /* Duplex Control */ + PHY_M_LEDC_DP_C_MSB = 1<<2, /* Duplex Control (MSB, 88E1111 only) */ + PHY_M_LEDC_RX_CTRL = 1<<1, /* Rx Activity / Link */ + PHY_M_LEDC_TX_CTRL = 1<<0, /* Tx Activity / Link */ + PHY_M_LEDC_TX_C_MSB = 1<<0, /* Tx Control (MSB, 88E1111 only) */ +}; + +#define PHY_M_LED_PULS_DUR(x) ( ((x)<<12) & PHY_M_LEDC_PULS_MSK) + +enum { + PULS_NO_STR = 0,/* no pulse stretching */ + PULS_21MS = 1,/* 21 ms to 42 ms */ + PULS_42MS = 2,/* 42 ms to 84 ms */ + PULS_84MS = 3,/* 84 ms to 170 ms */ + PULS_170MS = 4,/* 170 ms to 340 ms */ + PULS_340MS = 5,/* 340 ms to 670 ms */ + PULS_670MS = 6,/* 670 ms to 1.3 s */ + PULS_1300MS = 7,/* 1.3 s to 2.7 s */ +}; + +#define PHY_M_LED_BLINK_RT(x) ( ((x)<<8) & PHY_M_LEDC_BL_R_MSK) + +enum { + BLINK_42MS = 0,/* 42 ms */ + BLINK_84MS = 1,/* 84 ms */ + BLINK_170MS = 2,/* 170 ms */ + BLINK_340MS = 3,/* 340 ms */ + BLINK_670MS = 4,/* 670 ms */ +}; + +/***** PHY_MARV_LED_OVER 16 bit r/w Manual LED Override Reg *****/ +#define PHY_M_LED_MO_SGMII(x) ((x)<<14) /* Bit 15..14: SGMII AN Timer */ + /* Bit 13..12: reserved */ +#define PHY_M_LED_MO_DUP(x) ((x)<<10) /* Bit 11..10: Duplex */ +#define PHY_M_LED_MO_10(x) ((x)<<8) /* Bit 9.. 8: Link 10 */ +#define PHY_M_LED_MO_100(x) ((x)<<6) /* Bit 7.. 6: Link 100 */ +#define PHY_M_LED_MO_1000(x) ((x)<<4) /* Bit 5.. 4: Link 1000 */ +#define PHY_M_LED_MO_RX(x) ((x)<<2) /* Bit 3.. 2: Rx */ +#define PHY_M_LED_MO_TX(x) ((x)<<0) /* Bit 1.. 0: Tx */ + +enum { + MO_LED_NORM = 0, + MO_LED_BLINK = 1, + MO_LED_OFF = 2, + MO_LED_ON = 3, +}; + +/***** PHY_MARV_EXT_CTRL_2 16 bit r/w Ext. PHY Specific Ctrl 2 *****/ +enum { + PHY_M_EC2_FI_IMPED = 1<<6, /* Fiber Input Impedance */ + PHY_M_EC2_FO_IMPED = 1<<5, /* Fiber Output Impedance */ + PHY_M_EC2_FO_M_CLK = 1<<4, /* Fiber Mode Clock Enable */ + PHY_M_EC2_FO_BOOST = 1<<3, /* Fiber Output Boost */ + PHY_M_EC2_FO_AM_MSK = 7,/* Bit 2.. 0: Fiber Output Amplitude */ +}; + +/***** PHY_MARV_EXT_P_STAT 16 bit r/w Ext. PHY Specific Status *****/ +enum { + PHY_M_FC_AUTO_SEL = 1<<15, /* Fiber/Copper Auto Sel. Dis. */ + PHY_M_FC_AN_REG_ACC = 1<<14, /* Fiber/Copper AN Reg. Access */ + PHY_M_FC_RESOLUTION = 1<<13, /* Fiber/Copper Resolution */ + PHY_M_SER_IF_AN_BP = 1<<12, /* Ser. IF AN Bypass Enable */ + PHY_M_SER_IF_BP_ST = 1<<11, /* Ser. IF AN Bypass Status */ + PHY_M_IRQ_POLARITY = 1<<10, /* IRQ polarity */ + PHY_M_DIS_AUT_MED = 1<<9, /* Disable Aut. Medium Reg. Selection */ + /* (88E1111 only) */ + /* Bit 9.. 4: reserved (88E1011 only) */ + PHY_M_UNDOC1 = 1<<7, /* undocumented bit !! */ + PHY_M_DTE_POW_STAT = 1<<4, /* DTE Power Status (88E1111 only) */ + PHY_M_MODE_MASK = 0xf, /* Bit 3.. 0: copy of HWCFG MODE[3:0] */ +}; + +/***** PHY_MARV_CABLE_DIAG 16 bit r/o Cable Diagnostic Reg *****/ +enum { + PHY_M_CABD_ENA_TEST = 1<<15, /* Enable Test (Page 0) */ + PHY_M_CABD_DIS_WAIT = 1<<15, /* Disable Waiting Period (Page 1) */ + /* (88E1111 only) */ + PHY_M_CABD_STAT_MSK = 3<<13, /* Bit 14..13: Status Mask */ + PHY_M_CABD_AMPL_MSK = 0x1f<<8,/* Bit 12.. 8: Amplitude Mask */ + /* (88E1111 only) */ + PHY_M_CABD_DIST_MSK = 0xff, /* Bit 7.. 0: Distance Mask */ +}; + +/* values for Cable Diagnostic Status (11=fail; 00=OK; 10=open; 01=short) */ +enum { + CABD_STAT_NORMAL= 0, + CABD_STAT_SHORT = 1, + CABD_STAT_OPEN = 2, + CABD_STAT_FAIL = 3, +}; + +/* for 10/100 Fast Ethernet PHY (88E3082 only) */ +/***** PHY_MARV_FE_LED_PAR 16 bit r/w LED Parallel Select Reg. *****/ + /* Bit 15..12: reserved (used internally) */ +enum { + PHY_M_FELP_LED2_MSK = 0xf<<8, /* Bit 11.. 8: LED2 Mask (LINK) */ + PHY_M_FELP_LED1_MSK = 0xf<<4, /* Bit 7.. 4: LED1 Mask (ACT) */ + PHY_M_FELP_LED0_MSK = 0xf, /* Bit 3.. 0: LED0 Mask (SPEED) */ +}; + +#define PHY_M_FELP_LED2_CTRL(x) ( ((x)<<8) & PHY_M_FELP_LED2_MSK) +#define PHY_M_FELP_LED1_CTRL(x) ( ((x)<<4) & PHY_M_FELP_LED1_MSK) +#define PHY_M_FELP_LED0_CTRL(x) ( ((x)<<0) & PHY_M_FELP_LED0_MSK) + +enum { + LED_PAR_CTRL_COLX = 0x00, + LED_PAR_CTRL_ERROR = 0x01, + LED_PAR_CTRL_DUPLEX = 0x02, + LED_PAR_CTRL_DP_COL = 0x03, + LED_PAR_CTRL_SPEED = 0x04, + LED_PAR_CTRL_LINK = 0x05, + LED_PAR_CTRL_TX = 0x06, + LED_PAR_CTRL_RX = 0x07, + LED_PAR_CTRL_ACT = 0x08, + LED_PAR_CTRL_LNK_RX = 0x09, + LED_PAR_CTRL_LNK_AC = 0x0a, + LED_PAR_CTRL_ACT_BL = 0x0b, + LED_PAR_CTRL_TX_BL = 0x0c, + LED_PAR_CTRL_RX_BL = 0x0d, + LED_PAR_CTRL_COL_BL = 0x0e, + LED_PAR_CTRL_INACT = 0x0f +}; + +/*****,PHY_MARV_FE_SPEC_2 16 bit r/w Specific Control Reg. 2 *****/ +enum { + PHY_M_FESC_DIS_WAIT = 1<<2, /* Disable TDR Waiting Period */ + PHY_M_FESC_ENA_MCLK = 1<<1, /* Enable MAC Rx Clock in sleep mode */ + PHY_M_FESC_SEL_CL_A = 1<<0, /* Select Class A driver (100B-TX) */ +}; + +/* for Yukon-2 Gigabit Ethernet PHY (88E1112 only) */ +/***** PHY_MARV_PHY_CTRL (page 2) 16 bit r/w MAC Specific Ctrl *****/ +enum { + PHY_M_MAC_MD_MSK = 7<<7, /* Bit 9.. 7: Mode Select Mask */ + PHY_M_MAC_MD_AUTO = 3,/* Auto Copper/1000Base-X */ + PHY_M_MAC_MD_COPPER = 5,/* Copper only */ + PHY_M_MAC_MD_1000BX = 7,/* 1000Base-X only */ +}; +#define PHY_M_MAC_MODE_SEL(x) ( ((x)<<7) & PHY_M_MAC_MD_MSK) + +/***** PHY_MARV_PHY_CTRL (page 3) 16 bit r/w LED Control Reg. *****/ +enum { + PHY_M_LEDC_LOS_MSK = 0xf<<12,/* Bit 15..12: LOS LED Ctrl. Mask */ + PHY_M_LEDC_INIT_MSK = 0xf<<8, /* Bit 11.. 8: INIT LED Ctrl. Mask */ + PHY_M_LEDC_STA1_MSK = 0xf<<4,/* Bit 7.. 4: STAT1 LED Ctrl. Mask */ + PHY_M_LEDC_STA0_MSK = 0xf, /* Bit 3.. 0: STAT0 LED Ctrl. Mask */ +}; + +#define PHY_M_LEDC_LOS_CTRL(x) ( ((x)<<12) & PHY_M_LEDC_LOS_MSK) +#define PHY_M_LEDC_INIT_CTRL(x) ( ((x)<<8) & PHY_M_LEDC_INIT_MSK) +#define PHY_M_LEDC_STA1_CTRL(x) ( ((x)<<4) & PHY_M_LEDC_STA1_MSK) +#define PHY_M_LEDC_STA0_CTRL(x) ( ((x)<<0) & PHY_M_LEDC_STA0_MSK) + +/* GMAC registers */ +/* Port Registers */ +enum { + GM_GP_STAT = 0x0000, /* 16 bit r/o General Purpose Status */ + GM_GP_CTRL = 0x0004, /* 16 bit r/w General Purpose Control */ + GM_TX_CTRL = 0x0008, /* 16 bit r/w Transmit Control Reg. */ + GM_RX_CTRL = 0x000c, /* 16 bit r/w Receive Control Reg. */ + GM_TX_FLOW_CTRL = 0x0010, /* 16 bit r/w Transmit Flow-Control */ + GM_TX_PARAM = 0x0014, /* 16 bit r/w Transmit Parameter Reg. */ + GM_SERIAL_MODE = 0x0018, /* 16 bit r/w Serial Mode Register */ +/* Source Address Registers */ + GM_SRC_ADDR_1L = 0x001c, /* 16 bit r/w Source Address 1 (low) */ + GM_SRC_ADDR_1M = 0x0020, /* 16 bit r/w Source Address 1 (middle) */ + GM_SRC_ADDR_1H = 0x0024, /* 16 bit r/w Source Address 1 (high) */ + GM_SRC_ADDR_2L = 0x0028, /* 16 bit r/w Source Address 2 (low) */ + GM_SRC_ADDR_2M = 0x002c, /* 16 bit r/w Source Address 2 (middle) */ + GM_SRC_ADDR_2H = 0x0030, /* 16 bit r/w Source Address 2 (high) */ + +/* Multicast Address Hash Registers */ + GM_MC_ADDR_H1 = 0x0034, /* 16 bit r/w Multicast Address Hash 1 */ + GM_MC_ADDR_H2 = 0x0038, /* 16 bit r/w Multicast Address Hash 2 */ + GM_MC_ADDR_H3 = 0x003c, /* 16 bit r/w Multicast Address Hash 3 */ + GM_MC_ADDR_H4 = 0x0040, /* 16 bit r/w Multicast Address Hash 4 */ + +/* Interrupt Source Registers */ + GM_TX_IRQ_SRC = 0x0044, /* 16 bit r/o Tx Overflow IRQ Source */ + GM_RX_IRQ_SRC = 0x0048, /* 16 bit r/o Rx Overflow IRQ Source */ + GM_TR_IRQ_SRC = 0x004c, /* 16 bit r/o Tx/Rx Over. IRQ Source */ + +/* Interrupt Mask Registers */ + GM_TX_IRQ_MSK = 0x0050, /* 16 bit r/w Tx Overflow IRQ Mask */ + GM_RX_IRQ_MSK = 0x0054, /* 16 bit r/w Rx Overflow IRQ Mask */ + GM_TR_IRQ_MSK = 0x0058, /* 16 bit r/w Tx/Rx Over. IRQ Mask */ + +/* Serial Management Interface (SMI) Registers */ + GM_SMI_CTRL = 0x0080, /* 16 bit r/w SMI Control Register */ + GM_SMI_DATA = 0x0084, /* 16 bit r/w SMI Data Register */ + GM_PHY_ADDR = 0x0088, /* 16 bit r/w GPHY Address Register */ +}; + +/* MIB Counters */ +#define GM_MIB_CNT_BASE 0x0100 /* Base Address of MIB Counters */ +#define GM_MIB_CNT_SIZE 44 /* Number of MIB Counters */ + +/* + * MIB Counters base address definitions (low word) - + * use offset 4 for access to high word (32 bit r/o) + */ +enum { + GM_RXF_UC_OK = GM_MIB_CNT_BASE + 0, /* Unicast Frames Received OK */ + GM_RXF_BC_OK = GM_MIB_CNT_BASE + 8, /* Broadcast Frames Received OK */ + GM_RXF_MPAUSE = GM_MIB_CNT_BASE + 16, /* Pause MAC Ctrl Frames Received */ + GM_RXF_MC_OK = GM_MIB_CNT_BASE + 24, /* Multicast Frames Received OK */ + GM_RXF_FCS_ERR = GM_MIB_CNT_BASE + 32, /* Rx Frame Check Seq. Error */ + /* GM_MIB_CNT_BASE + 40: reserved */ + GM_RXO_OK_LO = GM_MIB_CNT_BASE + 48, /* Octets Received OK Low */ + GM_RXO_OK_HI = GM_MIB_CNT_BASE + 56, /* Octets Received OK High */ + GM_RXO_ERR_LO = GM_MIB_CNT_BASE + 64, /* Octets Received Invalid Low */ + GM_RXO_ERR_HI = GM_MIB_CNT_BASE + 72, /* Octets Received Invalid High */ + GM_RXF_SHT = GM_MIB_CNT_BASE + 80, /* Frames <64 Byte Received OK */ + GM_RXE_FRAG = GM_MIB_CNT_BASE + 88, /* Frames <64 Byte Received with FCS Err */ + GM_RXF_64B = GM_MIB_CNT_BASE + 96, /* 64 Byte Rx Frame */ + GM_RXF_127B = GM_MIB_CNT_BASE + 104, /* 65-127 Byte Rx Frame */ + GM_RXF_255B = GM_MIB_CNT_BASE + 112, /* 128-255 Byte Rx Frame */ + GM_RXF_511B = GM_MIB_CNT_BASE + 120, /* 256-511 Byte Rx Frame */ + GM_RXF_1023B = GM_MIB_CNT_BASE + 128, /* 512-1023 Byte Rx Frame */ + GM_RXF_1518B = GM_MIB_CNT_BASE + 136, /* 1024-1518 Byte Rx Frame */ + GM_RXF_MAX_SZ = GM_MIB_CNT_BASE + 144, /* 1519-MaxSize Byte Rx Frame */ + GM_RXF_LNG_ERR = GM_MIB_CNT_BASE + 152, /* Rx Frame too Long Error */ + GM_RXF_JAB_PKT = GM_MIB_CNT_BASE + 160, /* Rx Jabber Packet Frame */ + /* GM_MIB_CNT_BASE + 168: reserved */ + GM_RXE_FIFO_OV = GM_MIB_CNT_BASE + 176, /* Rx FIFO overflow Event */ + /* GM_MIB_CNT_BASE + 184: reserved */ + GM_TXF_UC_OK = GM_MIB_CNT_BASE + 192, /* Unicast Frames Xmitted OK */ + GM_TXF_BC_OK = GM_MIB_CNT_BASE + 200, /* Broadcast Frames Xmitted OK */ + GM_TXF_MPAUSE = GM_MIB_CNT_BASE + 208, /* Pause MAC Ctrl Frames Xmitted */ + GM_TXF_MC_OK = GM_MIB_CNT_BASE + 216, /* Multicast Frames Xmitted OK */ + GM_TXO_OK_LO = GM_MIB_CNT_BASE + 224, /* Octets Transmitted OK Low */ + GM_TXO_OK_HI = GM_MIB_CNT_BASE + 232, /* Octets Transmitted OK High */ + GM_TXF_64B = GM_MIB_CNT_BASE + 240, /* 64 Byte Tx Frame */ + GM_TXF_127B = GM_MIB_CNT_BASE + 248, /* 65-127 Byte Tx Frame */ + GM_TXF_255B = GM_MIB_CNT_BASE + 256, /* 128-255 Byte Tx Frame */ + GM_TXF_511B = GM_MIB_CNT_BASE + 264, /* 256-511 Byte Tx Frame */ + GM_TXF_1023B = GM_MIB_CNT_BASE + 272, /* 512-1023 Byte Tx Frame */ + GM_TXF_1518B = GM_MIB_CNT_BASE + 280, /* 1024-1518 Byte Tx Frame */ + GM_TXF_MAX_SZ = GM_MIB_CNT_BASE + 288, /* 1519-MaxSize Byte Tx Frame */ + + GM_TXF_COL = GM_MIB_CNT_BASE + 304, /* Tx Collision */ + GM_TXF_LAT_COL = GM_MIB_CNT_BASE + 312, /* Tx Late Collision */ + GM_TXF_ABO_COL = GM_MIB_CNT_BASE + 320, /* Tx aborted due to Exces. Col. */ + GM_TXF_MUL_COL = GM_MIB_CNT_BASE + 328, /* Tx Multiple Collision */ + GM_TXF_SNG_COL = GM_MIB_CNT_BASE + 336, /* Tx Single Collision */ + GM_TXE_FIFO_UR = GM_MIB_CNT_BASE + 344, /* Tx FIFO Underrun Event */ +}; + +/* GMAC Bit Definitions */ +/* GM_GP_STAT 16 bit r/o General Purpose Status Register */ +enum { + GM_GPSR_SPEED = 1<<15, /* Bit 15: Port Speed (1 = 100 Mbps) */ + GM_GPSR_DUPLEX = 1<<14, /* Bit 14: Duplex Mode (1 = Full) */ + GM_GPSR_FC_TX_DIS = 1<<13, /* Bit 13: Tx Flow-Control Mode Disabled */ + GM_GPSR_LINK_UP = 1<<12, /* Bit 12: Link Up Status */ + GM_GPSR_PAUSE = 1<<11, /* Bit 11: Pause State */ + GM_GPSR_TX_ACTIVE = 1<<10, /* Bit 10: Tx in Progress */ + GM_GPSR_EXC_COL = 1<<9, /* Bit 9: Excessive Collisions Occured */ + GM_GPSR_LAT_COL = 1<<8, /* Bit 8: Late Collisions Occured */ + + GM_GPSR_PHY_ST_CH = 1<<5, /* Bit 5: PHY Status Change */ + GM_GPSR_GIG_SPEED = 1<<4, /* Bit 4: Gigabit Speed (1 = 1000 Mbps) */ + GM_GPSR_PART_MODE = 1<<3, /* Bit 3: Partition mode */ + GM_GPSR_FC_RX_DIS = 1<<2, /* Bit 2: Rx Flow-Control Mode Disabled */ + GM_GPSR_PROM_EN = 1<<1, /* Bit 1: Promiscuous Mode Enabled */ +}; + +/* GM_GP_CTRL 16 bit r/w General Purpose Control Register */ +enum { + GM_GPCR_PROM_ENA = 1<<14, /* Bit 14: Enable Promiscuous Mode */ + GM_GPCR_FC_TX_DIS = 1<<13, /* Bit 13: Disable Tx Flow-Control Mode */ + GM_GPCR_TX_ENA = 1<<12, /* Bit 12: Enable Transmit */ + GM_GPCR_RX_ENA = 1<<11, /* Bit 11: Enable Receive */ + GM_GPCR_BURST_ENA = 1<<10, /* Bit 10: Enable Burst Mode */ + GM_GPCR_LOOP_ENA = 1<<9, /* Bit 9: Enable MAC Loopback Mode */ + GM_GPCR_PART_ENA = 1<<8, /* Bit 8: Enable Partition Mode */ + GM_GPCR_GIGS_ENA = 1<<7, /* Bit 7: Gigabit Speed (1000 Mbps) */ + GM_GPCR_FL_PASS = 1<<6, /* Bit 6: Force Link Pass */ + GM_GPCR_DUP_FULL = 1<<5, /* Bit 5: Full Duplex Mode */ + GM_GPCR_FC_RX_DIS = 1<<4, /* Bit 4: Disable Rx Flow-Control Mode */ + GM_GPCR_SPEED_100 = 1<<3, /* Bit 3: Port Speed 100 Mbps */ + GM_GPCR_AU_DUP_DIS = 1<<2, /* Bit 2: Disable Auto-Update Duplex */ + GM_GPCR_AU_FCT_DIS = 1<<1, /* Bit 1: Disable Auto-Update Flow-C. */ + GM_GPCR_AU_SPD_DIS = 1<<0, /* Bit 0: Disable Auto-Update Speed */ +}; + +#define GM_GPCR_SPEED_1000 (GM_GPCR_GIGS_ENA | GM_GPCR_SPEED_100) +#define GM_GPCR_AU_ALL_DIS (GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS|GM_GPCR_AU_SPD_DIS) + +/* GM_TX_CTRL 16 bit r/w Transmit Control Register */ +enum { + GM_TXCR_FORCE_JAM = 1<<15, /* Bit 15: Force Jam / Flow-Control */ + GM_TXCR_CRC_DIS = 1<<14, /* Bit 14: Disable insertion of CRC */ + GM_TXCR_PAD_DIS = 1<<13, /* Bit 13: Disable padding of packets */ + GM_TXCR_COL_THR_MSK = 1<<10, /* Bit 12..10: Collision Threshold */ +}; + +#define TX_COL_THR(x) (((x)<<10) & GM_TXCR_COL_THR_MSK) +#define TX_COL_DEF 0x04 + +/* GM_RX_CTRL 16 bit r/w Receive Control Register */ +enum { + GM_RXCR_UCF_ENA = 1<<15, /* Bit 15: Enable Unicast filtering */ + GM_RXCR_MCF_ENA = 1<<14, /* Bit 14: Enable Multicast filtering */ + GM_RXCR_CRC_DIS = 1<<13, /* Bit 13: Remove 4-byte CRC */ + GM_RXCR_PASS_FC = 1<<12, /* Bit 12: Pass FC packets to FIFO */ +}; + +/* GM_TX_PARAM 16 bit r/w Transmit Parameter Register */ +enum { + GM_TXPA_JAMLEN_MSK = 0x03<<14, /* Bit 15..14: Jam Length */ + GM_TXPA_JAMIPG_MSK = 0x1f<<9, /* Bit 13..9: Jam IPG */ + GM_TXPA_JAMDAT_MSK = 0x1f<<4, /* Bit 8..4: IPG Jam to Data */ + + TX_JAM_LEN_DEF = 0x03, + TX_JAM_IPG_DEF = 0x0b, + TX_IPG_JAM_DEF = 0x1c, +}; + +#define TX_JAM_LEN_VAL(x) (((x)<<14) & GM_TXPA_JAMLEN_MSK) +#define TX_JAM_IPG_VAL(x) (((x)<<9) & GM_TXPA_JAMIPG_MSK) +#define TX_IPG_JAM_DATA(x) (((x)<<4) & GM_TXPA_JAMDAT_MSK) + + +/* GM_SERIAL_MODE 16 bit r/w Serial Mode Register */ +enum { + GM_SMOD_DATABL_MSK = 0x1f<<11, /* Bit 15..11: Data Blinder (r/o) */ + GM_SMOD_LIMIT_4 = 1<<10, /* Bit 10: 4 consecutive Tx trials */ + GM_SMOD_VLAN_ENA = 1<<9, /* Bit 9: Enable VLAN (Max. Frame Len) */ + GM_SMOD_JUMBO_ENA = 1<<8, /* Bit 8: Enable Jumbo (Max. Frame Len) */ + GM_SMOD_IPG_MSK = 0x1f /* Bit 4..0: Inter-Packet Gap (IPG) */ +}; + +#define DATA_BLIND_VAL(x) (((x)<<11) & GM_SMOD_DATABL_MSK) +#define DATA_BLIND_DEF 0x04 + +#define IPG_DATA_VAL(x) (x & GM_SMOD_IPG_MSK) +#define IPG_DATA_DEF 0x1e + +/* GM_SMI_CTRL 16 bit r/w SMI Control Register */ +enum { + GM_SMI_CT_PHY_A_MSK = 0x1f<<11,/* Bit 15..11: PHY Device Address */ + GM_SMI_CT_REG_A_MSK = 0x1f<<6,/* Bit 10.. 6: PHY Register Address */ + GM_SMI_CT_OP_RD = 1<<5, /* Bit 5: OpCode Read (0=Write)*/ + GM_SMI_CT_RD_VAL = 1<<4, /* Bit 4: Read Valid (Read completed) */ + GM_SMI_CT_BUSY = 1<<3, /* Bit 3: Busy (Operation in progress) */ +}; + +#define GM_SMI_CT_PHY_AD(x) (((x)<<11) & GM_SMI_CT_PHY_A_MSK) +#define GM_SMI_CT_REG_AD(x) (((x)<<6) & GM_SMI_CT_REG_A_MSK) + +/* GM_PHY_ADDR 16 bit r/w GPHY Address Register */ +enum { + GM_PAR_MIB_CLR = 1<<5, /* Bit 5: Set MIB Clear Counter Mode */ + GM_PAR_MIB_TST = 1<<4, /* Bit 4: MIB Load Counter (Test Mode) */ +}; + +/* Receive Frame Status Encoding */ +enum { + GMR_FS_LEN = 0xffff<<16, /* Bit 31..16: Rx Frame Length */ + GMR_FS_VLAN = 1<<13, /* Bit 13: VLAN Packet */ + GMR_FS_JABBER = 1<<12, /* Bit 12: Jabber Packet */ + GMR_FS_UN_SIZE = 1<<11, /* Bit 11: Undersize Packet */ + GMR_FS_MC = 1<<10, /* Bit 10: Multicast Packet */ + GMR_FS_BC = 1<<9, /* Bit 9: Broadcast Packet */ + GMR_FS_RX_OK = 1<<8, /* Bit 8: Receive OK (Good Packet) */ + GMR_FS_GOOD_FC = 1<<7, /* Bit 7: Good Flow-Control Packet */ + GMR_FS_BAD_FC = 1<<6, /* Bit 6: Bad Flow-Control Packet */ + GMR_FS_MII_ERR = 1<<5, /* Bit 5: MII Error */ + GMR_FS_LONG_ERR = 1<<4, /* Bit 4: Too Long Packet */ + GMR_FS_FRAGMENT = 1<<3, /* Bit 3: Fragment */ + + GMR_FS_CRC_ERR = 1<<1, /* Bit 1: CRC Error */ + GMR_FS_RX_FF_OV = 1<<0, /* Bit 0: Rx FIFO Overflow */ + +/* + * GMR_FS_ANY_ERR (analogous to XMR_FS_ANY_ERR) + */ + GMR_FS_ANY_ERR = GMR_FS_CRC_ERR | GMR_FS_LONG_ERR | + GMR_FS_MII_ERR | GMR_FS_BAD_FC | GMR_FS_GOOD_FC | + GMR_FS_JABBER, +/* Rx GMAC FIFO Flush Mask (default) */ + RX_FF_FL_DEF_MSK = GMR_FS_CRC_ERR | GMR_FS_RX_FF_OV |GMR_FS_MII_ERR | + GMR_FS_BAD_FC | GMR_FS_GOOD_FC | GMR_FS_UN_SIZE | + GMR_FS_JABBER, +}; + +/* RX_GMF_CTRL_T 32 bit Rx GMAC FIFO Control/Test */ +enum { + GMF_WP_TST_ON = 1<<14, /* Write Pointer Test On */ + GMF_WP_TST_OFF = 1<<13, /* Write Pointer Test Off */ + GMF_WP_STEP = 1<<12, /* Write Pointer Step/Increment */ + + GMF_RP_TST_ON = 1<<10, /* Read Pointer Test On */ + GMF_RP_TST_OFF = 1<<9, /* Read Pointer Test Off */ + GMF_RP_STEP = 1<<8, /* Read Pointer Step/Increment */ + GMF_RX_F_FL_ON = 1<<7, /* Rx FIFO Flush Mode On */ + GMF_RX_F_FL_OFF = 1<<6, /* Rx FIFO Flush Mode Off */ + GMF_CLI_RX_FO = 1<<5, /* Clear IRQ Rx FIFO Overrun */ + GMF_CLI_RX_FC = 1<<4, /* Clear IRQ Rx Frame Complete */ + GMF_OPER_ON = 1<<3, /* Operational Mode On */ + GMF_OPER_OFF = 1<<2, /* Operational Mode Off */ + GMF_RST_CLR = 1<<1, /* Clear GMAC FIFO Reset */ + GMF_RST_SET = 1<<0, /* Set GMAC FIFO Reset */ + + RX_GMF_FL_THR_DEF = 0xa, /* flush threshold (default) */ +}; + + +/* TX_GMF_CTRL_T 32 bit Tx GMAC FIFO Control/Test */ +enum { + GMF_WSP_TST_ON = 1<<18,/* Write Shadow Pointer Test On */ + GMF_WSP_TST_OFF = 1<<17,/* Write Shadow Pointer Test Off */ + GMF_WSP_STEP = 1<<16,/* Write Shadow Pointer Step/Increment */ + + GMF_CLI_TX_FU = 1<<6, /* Clear IRQ Tx FIFO Underrun */ + GMF_CLI_TX_FC = 1<<5, /* Clear IRQ Tx Frame Complete */ + GMF_CLI_TX_PE = 1<<4, /* Clear IRQ Tx Parity Error */ +}; + +/* GMAC_TI_ST_CTRL 8 bit Time Stamp Timer Ctrl Reg (YUKON only) */ +enum { + GMT_ST_START = 1<<2, /* Start Time Stamp Timer */ + GMT_ST_STOP = 1<<1, /* Stop Time Stamp Timer */ + GMT_ST_CLR_IRQ = 1<<0, /* Clear Time Stamp Timer IRQ */ +}; + +/* GMAC_CTRL 32 bit GMAC Control Reg (YUKON only) */ +enum { + GMC_H_BURST_ON = 1<<7, /* Half Duplex Burst Mode On */ + GMC_H_BURST_OFF = 1<<6, /* Half Duplex Burst Mode Off */ + GMC_F_LOOPB_ON = 1<<5, /* FIFO Loopback On */ + GMC_F_LOOPB_OFF = 1<<4, /* FIFO Loopback Off */ + GMC_PAUSE_ON = 1<<3, /* Pause On */ + GMC_PAUSE_OFF = 1<<2, /* Pause Off */ + GMC_RST_CLR = 1<<1, /* Clear GMAC Reset */ + GMC_RST_SET = 1<<0, /* Set GMAC Reset */ +}; + +/* GPHY_CTRL 32 bit GPHY Control Reg (YUKON only) */ +enum { + GPC_SEL_BDT = 1<<28, /* Select Bi-Dir. Transfer for MDC/MDIO */ + GPC_INT_POL_HI = 1<<27, /* IRQ Polarity is Active HIGH */ + GPC_75_OHM = 1<<26, /* Use 75 Ohm Termination instead of 50 */ + GPC_DIS_FC = 1<<25, /* Disable Automatic Fiber/Copper Detection */ + GPC_DIS_SLEEP = 1<<24, /* Disable Energy Detect */ + GPC_HWCFG_M_3 = 1<<23, /* HWCFG_MODE[3] */ + GPC_HWCFG_M_2 = 1<<22, /* HWCFG_MODE[2] */ + GPC_HWCFG_M_1 = 1<<21, /* HWCFG_MODE[1] */ + GPC_HWCFG_M_0 = 1<<20, /* HWCFG_MODE[0] */ + GPC_ANEG_0 = 1<<19, /* ANEG[0] */ + GPC_ENA_XC = 1<<18, /* Enable MDI crossover */ + GPC_DIS_125 = 1<<17, /* Disable 125 MHz clock */ + GPC_ANEG_3 = 1<<16, /* ANEG[3] */ + GPC_ANEG_2 = 1<<15, /* ANEG[2] */ + GPC_ANEG_1 = 1<<14, /* ANEG[1] */ + GPC_ENA_PAUSE = 1<<13, /* Enable Pause (SYM_OR_REM) */ + GPC_PHYADDR_4 = 1<<12, /* Bit 4 of Phy Addr */ + GPC_PHYADDR_3 = 1<<11, /* Bit 3 of Phy Addr */ + GPC_PHYADDR_2 = 1<<10, /* Bit 2 of Phy Addr */ + GPC_PHYADDR_1 = 1<<9, /* Bit 1 of Phy Addr */ + GPC_PHYADDR_0 = 1<<8, /* Bit 0 of Phy Addr */ + /* Bits 7..2: reserved */ + GPC_RST_CLR = 1<<1, /* Clear GPHY Reset */ + GPC_RST_SET = 1<<0, /* Set GPHY Reset */ +}; + +#define GPC_HWCFG_GMII_COP (GPC_HWCFG_M_3|GPC_HWCFG_M_2 | GPC_HWCFG_M_1 | GPC_HWCFG_M_0) +#define GPC_HWCFG_GMII_FIB (GPC_HWCFG_M_2 | GPC_HWCFG_M_1 | GPC_HWCFG_M_0) +#define GPC_ANEG_ADV_ALL_M (GPC_ANEG_3 | GPC_ANEG_2 | GPC_ANEG_1 | GPC_ANEG_0) + +/* forced speed and duplex mode (don't mix with other ANEG bits) */ +#define GPC_FRC10MBIT_HALF 0 +#define GPC_FRC10MBIT_FULL GPC_ANEG_0 +#define GPC_FRC100MBIT_HALF GPC_ANEG_1 +#define GPC_FRC100MBIT_FULL (GPC_ANEG_0 | GPC_ANEG_1) + +/* auto-negotiation with limited advertised speeds */ +/* mix only with master/slave settings (for copper) */ +#define GPC_ADV_1000_HALF GPC_ANEG_2 +#define GPC_ADV_1000_FULL GPC_ANEG_3 +#define GPC_ADV_ALL (GPC_ANEG_2 | GPC_ANEG_3) + +/* master/slave settings */ +/* only for copper with 1000 Mbps */ +#define GPC_FORCE_MASTER 0 +#define GPC_FORCE_SLAVE GPC_ANEG_0 +#define GPC_PREF_MASTER GPC_ANEG_1 +#define GPC_PREF_SLAVE (GPC_ANEG_1 | GPC_ANEG_0) + +/* GMAC_IRQ_SRC 8 bit GMAC Interrupt Source Reg (YUKON only) */ +/* GMAC_IRQ_MSK 8 bit GMAC Interrupt Mask Reg (YUKON only) */ +enum { + GM_IS_TX_CO_OV = 1<<5, /* Transmit Counter Overflow IRQ */ + GM_IS_RX_CO_OV = 1<<4, /* Receive Counter Overflow IRQ */ + GM_IS_TX_FF_UR = 1<<3, /* Transmit FIFO Underrun */ + GM_IS_TX_COMPL = 1<<2, /* Frame Transmission Complete */ + GM_IS_RX_FF_OR = 1<<1, /* Receive FIFO Overrun */ + GM_IS_RX_COMPL = 1<<0, /* Frame Reception Complete */ + +#define GMAC_DEF_MSK (GM_IS_TX_CO_OV | GM_IS_RX_CO_OV | GM_IS_TX_FF_UR) + +/* GMAC_LINK_CTRL 16 bit GMAC Link Control Reg (YUKON only) */ + /* Bits 15.. 2: reserved */ + GMLC_RST_CLR = 1<<1, /* Clear GMAC Link Reset */ + GMLC_RST_SET = 1<<0, /* Set GMAC Link Reset */ + + +/* WOL_CTRL_STAT 16 bit WOL Control/Status Reg */ + WOL_CTL_LINK_CHG_OCC = 1<<15, + WOL_CTL_MAGIC_PKT_OCC = 1<<14, + WOL_CTL_PATTERN_OCC = 1<<13, + WOL_CTL_CLEAR_RESULT = 1<<12, + WOL_CTL_ENA_PME_ON_LINK_CHG = 1<<11, + WOL_CTL_DIS_PME_ON_LINK_CHG = 1<<10, + WOL_CTL_ENA_PME_ON_MAGIC_PKT = 1<<9, + WOL_CTL_DIS_PME_ON_MAGIC_PKT = 1<<8, + WOL_CTL_ENA_PME_ON_PATTERN = 1<<7, + WOL_CTL_DIS_PME_ON_PATTERN = 1<<6, + WOL_CTL_ENA_LINK_CHG_UNIT = 1<<5, + WOL_CTL_DIS_LINK_CHG_UNIT = 1<<4, + WOL_CTL_ENA_MAGIC_PKT_UNIT = 1<<3, + WOL_CTL_DIS_MAGIC_PKT_UNIT = 1<<2, + WOL_CTL_ENA_PATTERN_UNIT = 1<<1, + WOL_CTL_DIS_PATTERN_UNIT = 1<<0, +}; + +#define WOL_CTL_DEFAULT \ + (WOL_CTL_DIS_PME_ON_LINK_CHG | \ + WOL_CTL_DIS_PME_ON_PATTERN | \ + WOL_CTL_DIS_PME_ON_MAGIC_PKT | \ + WOL_CTL_DIS_LINK_CHG_UNIT | \ + WOL_CTL_DIS_PATTERN_UNIT | \ + WOL_CTL_DIS_MAGIC_PKT_UNIT) + +/* WOL_MATCH_CTL 8 bit WOL Match Control Reg */ +#define WOL_CTL_PATT_ENA(x) (1 << (x)) + + +/* XMAC II registers */ +enum { + XM_MMU_CMD = 0x0000, /* 16 bit r/w MMU Command Register */ + XM_POFF = 0x0008, /* 32 bit r/w Packet Offset Register */ + XM_BURST = 0x000c, /* 32 bit r/w Burst Register for half duplex*/ + XM_1L_VLAN_TAG = 0x0010, /* 16 bit r/w One Level VLAN Tag ID */ + XM_2L_VLAN_TAG = 0x0014, /* 16 bit r/w Two Level VLAN Tag ID */ + XM_TX_CMD = 0x0020, /* 16 bit r/w Transmit Command Register */ + XM_TX_RT_LIM = 0x0024, /* 16 bit r/w Transmit Retry Limit Register */ + XM_TX_STIME = 0x0028, /* 16 bit r/w Transmit Slottime Register */ + XM_TX_IPG = 0x002c, /* 16 bit r/w Transmit Inter Packet Gap */ + XM_RX_CMD = 0x0030, /* 16 bit r/w Receive Command Register */ + XM_PHY_ADDR = 0x0034, /* 16 bit r/w PHY Address Register */ + XM_PHY_DATA = 0x0038, /* 16 bit r/w PHY Data Register */ + XM_GP_PORT = 0x0040, /* 32 bit r/w General Purpose Port Register */ + XM_IMSK = 0x0044, /* 16 bit r/w Interrupt Mask Register */ + XM_ISRC = 0x0048, /* 16 bit r/o Interrupt Status Register */ + XM_HW_CFG = 0x004c, /* 16 bit r/w Hardware Config Register */ + XM_TX_LO_WM = 0x0060, /* 16 bit r/w Tx FIFO Low Water Mark */ + XM_TX_HI_WM = 0x0062, /* 16 bit r/w Tx FIFO High Water Mark */ + XM_TX_THR = 0x0064, /* 16 bit r/w Tx Request Threshold */ + XM_HT_THR = 0x0066, /* 16 bit r/w Host Request Threshold */ + XM_PAUSE_DA = 0x0068, /* NA reg r/w Pause Destination Address */ + XM_CTL_PARA = 0x0070, /* 32 bit r/w Control Parameter Register */ + XM_MAC_OPCODE = 0x0074, /* 16 bit r/w Opcode for MAC control frames */ + XM_MAC_PTIME = 0x0076, /* 16 bit r/w Pause time for MAC ctrl frames*/ + XM_TX_STAT = 0x0078, /* 32 bit r/o Tx Status LIFO Register */ + + XM_EXM_START = 0x0080, /* r/w Start Address of the EXM Regs */ +#define XM_EXM(reg) (XM_EXM_START + ((reg) << 3)) +}; + +enum { + XM_SRC_CHK = 0x0100, /* NA reg r/w Source Check Address Register */ + XM_SA = 0x0108, /* NA reg r/w Station Address Register */ + XM_HSM = 0x0110, /* 64 bit r/w Hash Match Address Registers */ + XM_RX_LO_WM = 0x0118, /* 16 bit r/w Receive Low Water Mark */ + XM_RX_HI_WM = 0x011a, /* 16 bit r/w Receive High Water Mark */ + XM_RX_THR = 0x011c, /* 32 bit r/w Receive Request Threshold */ + XM_DEV_ID = 0x0120, /* 32 bit r/o Device ID Register */ + XM_MODE = 0x0124, /* 32 bit r/w Mode Register */ + XM_LSA = 0x0128, /* NA reg r/o Last Source Register */ + XM_TS_READ = 0x0130, /* 32 bit r/o Time Stamp Read Register */ + XM_TS_LOAD = 0x0134, /* 32 bit r/o Time Stamp Load Value */ + XM_STAT_CMD = 0x0200, /* 16 bit r/w Statistics Command Register */ + XM_RX_CNT_EV = 0x0204, /* 32 bit r/o Rx Counter Event Register */ + XM_TX_CNT_EV = 0x0208, /* 32 bit r/o Tx Counter Event Register */ + XM_RX_EV_MSK = 0x020c, /* 32 bit r/w Rx Counter Event Mask */ + XM_TX_EV_MSK = 0x0210, /* 32 bit r/w Tx Counter Event Mask */ + XM_TXF_OK = 0x0280, /* 32 bit r/o Frames Transmitted OK Conuter */ + XM_TXO_OK_HI = 0x0284, /* 32 bit r/o Octets Transmitted OK High Cnt*/ + XM_TXO_OK_LO = 0x0288, /* 32 bit r/o Octets Transmitted OK Low Cnt */ + XM_TXF_BC_OK = 0x028c, /* 32 bit r/o Broadcast Frames Xmitted OK */ + XM_TXF_MC_OK = 0x0290, /* 32 bit r/o Multicast Frames Xmitted OK */ + XM_TXF_UC_OK = 0x0294, /* 32 bit r/o Unicast Frames Xmitted OK */ + XM_TXF_LONG = 0x0298, /* 32 bit r/o Tx Long Frame Counter */ + XM_TXE_BURST = 0x029c, /* 32 bit r/o Tx Burst Event Counter */ + XM_TXF_MPAUSE = 0x02a0, /* 32 bit r/o Tx Pause MAC Ctrl Frame Cnt */ + XM_TXF_MCTRL = 0x02a4, /* 32 bit r/o Tx MAC Ctrl Frame Counter */ + XM_TXF_SNG_COL = 0x02a8, /* 32 bit r/o Tx Single Collision Counter */ + XM_TXF_MUL_COL = 0x02ac, /* 32 bit r/o Tx Multiple Collision Counter */ + XM_TXF_ABO_COL = 0x02b0, /* 32 bit r/o Tx aborted due to Exces. Col. */ + XM_TXF_LAT_COL = 0x02b4, /* 32 bit r/o Tx Late Collision Counter */ + XM_TXF_DEF = 0x02b8, /* 32 bit r/o Tx Deferred Frame Counter */ + XM_TXF_EX_DEF = 0x02bc, /* 32 bit r/o Tx Excessive Deferall Counter */ + XM_TXE_FIFO_UR = 0x02c0, /* 32 bit r/o Tx FIFO Underrun Event Cnt */ + XM_TXE_CS_ERR = 0x02c4, /* 32 bit r/o Tx Carrier Sense Error Cnt */ + XM_TXP_UTIL = 0x02c8, /* 32 bit r/o Tx Utilization in % */ + XM_TXF_64B = 0x02d0, /* 32 bit r/o 64 Byte Tx Frame Counter */ + XM_TXF_127B = 0x02d4, /* 32 bit r/o 65-127 Byte Tx Frame Counter */ + XM_TXF_255B = 0x02d8, /* 32 bit r/o 128-255 Byte Tx Frame Counter */ + XM_TXF_511B = 0x02dc, /* 32 bit r/o 256-511 Byte Tx Frame Counter */ + XM_TXF_1023B = 0x02e0, /* 32 bit r/o 512-1023 Byte Tx Frame Counter*/ + XM_TXF_MAX_SZ = 0x02e4, /* 32 bit r/o 1024-MaxSize Byte Tx Frame Cnt*/ + XM_RXF_OK = 0x0300, /* 32 bit r/o Frames Received OK */ + XM_RXO_OK_HI = 0x0304, /* 32 bit r/o Octets Received OK High Cnt */ + XM_RXO_OK_LO = 0x0308, /* 32 bit r/o Octets Received OK Low Counter*/ + XM_RXF_BC_OK = 0x030c, /* 32 bit r/o Broadcast Frames Received OK */ + XM_RXF_MC_OK = 0x0310, /* 32 bit r/o Multicast Frames Received OK */ + XM_RXF_UC_OK = 0x0314, /* 32 bit r/o Unicast Frames Received OK */ + XM_RXF_MPAUSE = 0x0318, /* 32 bit r/o Rx Pause MAC Ctrl Frame Cnt */ + XM_RXF_MCTRL = 0x031c, /* 32 bit r/o Rx MAC Ctrl Frame Counter */ + XM_RXF_INV_MP = 0x0320, /* 32 bit r/o Rx invalid Pause Frame Cnt */ + XM_RXF_INV_MOC = 0x0324, /* 32 bit r/o Rx Frames with inv. MAC Opcode*/ + XM_RXE_BURST = 0x0328, /* 32 bit r/o Rx Burst Event Counter */ + XM_RXE_FMISS = 0x032c, /* 32 bit r/o Rx Missed Frames Event Cnt */ + XM_RXF_FRA_ERR = 0x0330, /* 32 bit r/o Rx Framing Error Counter */ + XM_RXE_FIFO_OV = 0x0334, /* 32 bit r/o Rx FIFO overflow Event Cnt */ + XM_RXF_JAB_PKT = 0x0338, /* 32 bit r/o Rx Jabber Packet Frame Cnt */ + XM_RXE_CAR_ERR = 0x033c, /* 32 bit r/o Rx Carrier Event Error Cnt */ + XM_RXF_LEN_ERR = 0x0340, /* 32 bit r/o Rx in Range Length Error */ + XM_RXE_SYM_ERR = 0x0344, /* 32 bit r/o Rx Symbol Error Counter */ + XM_RXE_SHT_ERR = 0x0348, /* 32 bit r/o Rx Short Event Error Cnt */ + XM_RXE_RUNT = 0x034c, /* 32 bit r/o Rx Runt Event Counter */ + XM_RXF_LNG_ERR = 0x0350, /* 32 bit r/o Rx Frame too Long Error Cnt */ + XM_RXF_FCS_ERR = 0x0354, /* 32 bit r/o Rx Frame Check Seq. Error Cnt */ + XM_RXF_CEX_ERR = 0x035c, /* 32 bit r/o Rx Carrier Ext Error Frame Cnt*/ + XM_RXP_UTIL = 0x0360, /* 32 bit r/o Rx Utilization in % */ + XM_RXF_64B = 0x0368, /* 32 bit r/o 64 Byte Rx Frame Counter */ + XM_RXF_127B = 0x036c, /* 32 bit r/o 65-127 Byte Rx Frame Counter */ + XM_RXF_255B = 0x0370, /* 32 bit r/o 128-255 Byte Rx Frame Counter */ + XM_RXF_511B = 0x0374, /* 32 bit r/o 256-511 Byte Rx Frame Counter */ + XM_RXF_1023B = 0x0378, /* 32 bit r/o 512-1023 Byte Rx Frame Counter*/ + XM_RXF_MAX_SZ = 0x037c, /* 32 bit r/o 1024-MaxSize Byte Rx Frame Cnt*/ +}; + +/* XM_MMU_CMD 16 bit r/w MMU Command Register */ +enum { + XM_MMU_PHY_RDY = 1<<12,/* Bit 12: PHY Read Ready */ + XM_MMU_PHY_BUSY = 1<<11,/* Bit 11: PHY Busy */ + XM_MMU_IGN_PF = 1<<10,/* Bit 10: Ignore Pause Frame */ + XM_MMU_MAC_LB = 1<<9, /* Bit 9: Enable MAC Loopback */ + XM_MMU_FRC_COL = 1<<7, /* Bit 7: Force Collision */ + XM_MMU_SIM_COL = 1<<6, /* Bit 6: Simulate Collision */ + XM_MMU_NO_PRE = 1<<5, /* Bit 5: No MDIO Preamble */ + XM_MMU_GMII_FD = 1<<4, /* Bit 4: GMII uses Full Duplex */ + XM_MMU_RAT_CTRL = 1<<3, /* Bit 3: Enable Rate Control */ + XM_MMU_GMII_LOOP= 1<<2, /* Bit 2: PHY is in Loopback Mode */ + XM_MMU_ENA_RX = 1<<1, /* Bit 1: Enable Receiver */ + XM_MMU_ENA_TX = 1<<0, /* Bit 0: Enable Transmitter */ +}; + + +/* XM_TX_CMD 16 bit r/w Transmit Command Register */ +enum { + XM_TX_BK2BK = 1<<6, /* Bit 6: Ignor Carrier Sense (Tx Bk2Bk)*/ + XM_TX_ENC_BYP = 1<<5, /* Bit 5: Set Encoder in Bypass Mode */ + XM_TX_SAM_LINE = 1<<4, /* Bit 4: (sc) Start utilization calculation */ + XM_TX_NO_GIG_MD = 1<<3, /* Bit 3: Disable Carrier Extension */ + XM_TX_NO_PRE = 1<<2, /* Bit 2: Disable Preamble Generation */ + XM_TX_NO_CRC = 1<<1, /* Bit 1: Disable CRC Generation */ + XM_TX_AUTO_PAD = 1<<0, /* Bit 0: Enable Automatic Padding */ +}; + +/* XM_TX_RT_LIM 16 bit r/w Transmit Retry Limit Register */ +#define XM_RT_LIM_MSK 0x1f /* Bit 4..0: Tx Retry Limit */ + + +/* XM_TX_STIME 16 bit r/w Transmit Slottime Register */ +#define XM_STIME_MSK 0x7f /* Bit 6..0: Tx Slottime bits */ + + +/* XM_TX_IPG 16 bit r/w Transmit Inter Packet Gap */ +#define XM_IPG_MSK 0xff /* Bit 7..0: IPG value bits */ + + +/* XM_RX_CMD 16 bit r/w Receive Command Register */ +enum { + XM_RX_LENERR_OK = 1<<8, /* Bit 8 don't set Rx Err bit for */ + /* inrange error packets */ + XM_RX_BIG_PK_OK = 1<<7, /* Bit 7 don't set Rx Err bit for */ + /* jumbo packets */ + XM_RX_IPG_CAP = 1<<6, /* Bit 6 repl. type field with IPG */ + XM_RX_TP_MD = 1<<5, /* Bit 5: Enable transparent Mode */ + XM_RX_STRIP_FCS = 1<<4, /* Bit 4: Enable FCS Stripping */ + XM_RX_SELF_RX = 1<<3, /* Bit 3: Enable Rx of own packets */ + XM_RX_SAM_LINE = 1<<2, /* Bit 2: (sc) Start utilization calculation */ + XM_RX_STRIP_PAD = 1<<1, /* Bit 1: Strip pad bytes of Rx frames */ + XM_RX_DIS_CEXT = 1<<0, /* Bit 0: Disable carrier ext. check */ +}; + + +/* XM_PHY_ADDR 16 bit r/w PHY Address Register */ +#define XM_PHY_ADDR_SZ 0x1f /* Bit 4..0: PHY Address bits */ + + +/* XM_GP_PORT 32 bit r/w General Purpose Port Register */ +enum { + XM_GP_ANIP = 1<<6, /* Bit 6: (ro) Auto-Neg. in progress */ + XM_GP_FRC_INT = 1<<5, /* Bit 5: (sc) Force Interrupt */ + XM_GP_RES_MAC = 1<<3, /* Bit 3: (sc) Reset MAC and FIFOs */ + XM_GP_RES_STAT = 1<<2, /* Bit 2: (sc) Reset the statistics module */ + XM_GP_INP_ASS = 1<<0, /* Bit 0: (ro) GP Input Pin asserted */ +}; + + +/* XM_IMSK 16 bit r/w Interrupt Mask Register */ +/* XM_ISRC 16 bit r/o Interrupt Status Register */ +enum { + XM_IS_LNK_AE = 1<<14, /* Bit 14: Link Asynchronous Event */ + XM_IS_TX_ABORT = 1<<13, /* Bit 13: Transmit Abort, late Col. etc */ + XM_IS_FRC_INT = 1<<12, /* Bit 12: Force INT bit set in GP */ + XM_IS_INP_ASS = 1<<11, /* Bit 11: Input Asserted, GP bit 0 set */ + XM_IS_LIPA_RC = 1<<10, /* Bit 10: Link Partner requests config */ + XM_IS_RX_PAGE = 1<<9, /* Bit 9: Page Received */ + XM_IS_TX_PAGE = 1<<8, /* Bit 8: Next Page Loaded for Transmit */ + XM_IS_AND = 1<<7, /* Bit 7: Auto-Negotiation Done */ + XM_IS_TSC_OV = 1<<6, /* Bit 6: Time Stamp Counter Overflow */ + XM_IS_RXC_OV = 1<<5, /* Bit 5: Rx Counter Event Overflow */ + XM_IS_TXC_OV = 1<<4, /* Bit 4: Tx Counter Event Overflow */ + XM_IS_RXF_OV = 1<<3, /* Bit 3: Receive FIFO Overflow */ + XM_IS_TXF_UR = 1<<2, /* Bit 2: Transmit FIFO Underrun */ + XM_IS_TX_COMP = 1<<1, /* Bit 1: Frame Tx Complete */ + XM_IS_RX_COMP = 1<<0, /* Bit 0: Frame Rx Complete */ +}; + +#define XM_DEF_MSK (~(XM_IS_INP_ASS | XM_IS_LIPA_RC | XM_IS_RX_PAGE | \ + XM_IS_AND | XM_IS_RXC_OV | XM_IS_TXC_OV | \ + XM_IS_RXF_OV | XM_IS_TXF_UR)) + + +/* XM_HW_CFG 16 bit r/w Hardware Config Register */ +enum { + XM_HW_GEN_EOP = 1<<3, /* Bit 3: generate End of Packet pulse */ + XM_HW_COM4SIG = 1<<2, /* Bit 2: use Comma Detect for Sig. Det.*/ + XM_HW_GMII_MD = 1<<0, /* Bit 0: GMII Interface selected */ +}; + + +/* XM_TX_LO_WM 16 bit r/w Tx FIFO Low Water Mark */ +/* XM_TX_HI_WM 16 bit r/w Tx FIFO High Water Mark */ +#define XM_TX_WM_MSK 0x01ff /* Bit 9.. 0 Tx FIFO Watermark bits */ + +/* XM_TX_THR 16 bit r/w Tx Request Threshold */ +/* XM_HT_THR 16 bit r/w Host Request Threshold */ +/* XM_RX_THR 16 bit r/w Rx Request Threshold */ +#define XM_THR_MSK 0x03ff /* Bit 10.. 0 Rx/Tx Request Threshold bits */ + + +/* XM_TX_STAT 32 bit r/o Tx Status LIFO Register */ +enum { + XM_ST_VALID = (1UL<<31), /* Bit 31: Status Valid */ + XM_ST_BYTE_CNT = (0x3fffL<<17), /* Bit 30..17: Tx frame Length */ + XM_ST_RETRY_CNT = (0x1fL<<12), /* Bit 16..12: Retry Count */ + XM_ST_EX_COL = 1<<11, /* Bit 11: Excessive Collisions */ + XM_ST_EX_DEF = 1<<10, /* Bit 10: Excessive Deferral */ + XM_ST_BURST = 1<<9, /* Bit 9: p. xmitted in burst md*/ + XM_ST_DEFER = 1<<8, /* Bit 8: packet was defered */ + XM_ST_BC = 1<<7, /* Bit 7: Broadcast packet */ + XM_ST_MC = 1<<6, /* Bit 6: Multicast packet */ + XM_ST_UC = 1<<5, /* Bit 5: Unicast packet */ + XM_ST_TX_UR = 1<<4, /* Bit 4: FIFO Underrun occured */ + XM_ST_CS_ERR = 1<<3, /* Bit 3: Carrier Sense Error */ + XM_ST_LAT_COL = 1<<2, /* Bit 2: Late Collision Error */ + XM_ST_MUL_COL = 1<<1, /* Bit 1: Multiple Collisions */ + XM_ST_SGN_COL = 1<<0, /* Bit 0: Single Collision */ +}; + +/* XM_RX_LO_WM 16 bit r/w Receive Low Water Mark */ +/* XM_RX_HI_WM 16 bit r/w Receive High Water Mark */ +#define XM_RX_WM_MSK 0x03ff /* Bit 11.. 0: Rx FIFO Watermark bits */ + + +/* XM_DEV_ID 32 bit r/o Device ID Register */ +#define XM_DEV_OUI (0x00ffffffUL<<8) /* Bit 31..8: Device OUI */ +#define XM_DEV_REV (0x07L << 5) /* Bit 7..5: Chip Rev Num */ + + +/* XM_MODE 32 bit r/w Mode Register */ +enum { + XM_MD_ENA_REJ = 1<<26, /* Bit 26: Enable Frame Reject */ + XM_MD_SPOE_E = 1<<25, /* Bit 25: Send Pause on Edge */ + /* extern generated */ + XM_MD_TX_REP = 1<<24, /* Bit 24: Transmit Repeater Mode */ + XM_MD_SPOFF_I = 1<<23, /* Bit 23: Send Pause on FIFO full */ + /* intern generated */ + XM_MD_LE_STW = 1<<22, /* Bit 22: Rx Stat Word in Little Endian */ + XM_MD_TX_CONT = 1<<21, /* Bit 21: Send Continuous */ + XM_MD_TX_PAUSE = 1<<20, /* Bit 20: (sc) Send Pause Frame */ + XM_MD_ATS = 1<<19, /* Bit 19: Append Time Stamp */ + XM_MD_SPOL_I = 1<<18, /* Bit 18: Send Pause on Low */ + /* intern generated */ + XM_MD_SPOH_I = 1<<17, /* Bit 17: Send Pause on High */ + /* intern generated */ + XM_MD_CAP = 1<<16, /* Bit 16: Check Address Pair */ + XM_MD_ENA_HASH = 1<<15, /* Bit 15: Enable Hashing */ + XM_MD_CSA = 1<<14, /* Bit 14: Check Station Address */ + XM_MD_CAA = 1<<13, /* Bit 13: Check Address Array */ + XM_MD_RX_MCTRL = 1<<12, /* Bit 12: Rx MAC Control Frame */ + XM_MD_RX_RUNT = 1<<11, /* Bit 11: Rx Runt Frames */ + XM_MD_RX_IRLE = 1<<10, /* Bit 10: Rx in Range Len Err Frame */ + XM_MD_RX_LONG = 1<<9, /* Bit 9: Rx Long Frame */ + XM_MD_RX_CRCE = 1<<8, /* Bit 8: Rx CRC Error Frame */ + XM_MD_RX_ERR = 1<<7, /* Bit 7: Rx Error Frame */ + XM_MD_DIS_UC = 1<<6, /* Bit 6: Disable Rx Unicast */ + XM_MD_DIS_MC = 1<<5, /* Bit 5: Disable Rx Multicast */ + XM_MD_DIS_BC = 1<<4, /* Bit 4: Disable Rx Broadcast */ + XM_MD_ENA_PROM = 1<<3, /* Bit 3: Enable Promiscuous */ + XM_MD_ENA_BE = 1<<2, /* Bit 2: Enable Big Endian */ + XM_MD_FTF = 1<<1, /* Bit 1: (sc) Flush Tx FIFO */ + XM_MD_FRF = 1<<0, /* Bit 0: (sc) Flush Rx FIFO */ +}; + +#define XM_PAUSE_MODE (XM_MD_SPOE_E | XM_MD_SPOL_I | XM_MD_SPOH_I) +#define XM_DEF_MODE (XM_MD_RX_RUNT | XM_MD_RX_IRLE | XM_MD_RX_LONG |\ + XM_MD_RX_CRCE | XM_MD_RX_ERR | XM_MD_CSA | XM_MD_CAA) + +/* XM_STAT_CMD 16 bit r/w Statistics Command Register */ +enum { + XM_SC_SNP_RXC = 1<<5, /* Bit 5: (sc) Snap Rx Counters */ + XM_SC_SNP_TXC = 1<<4, /* Bit 4: (sc) Snap Tx Counters */ + XM_SC_CP_RXC = 1<<3, /* Bit 3: Copy Rx Counters Continuously */ + XM_SC_CP_TXC = 1<<2, /* Bit 2: Copy Tx Counters Continuously */ + XM_SC_CLR_RXC = 1<<1, /* Bit 1: (sc) Clear Rx Counters */ + XM_SC_CLR_TXC = 1<<0, /* Bit 0: (sc) Clear Tx Counters */ +}; + + +/* XM_RX_CNT_EV 32 bit r/o Rx Counter Event Register */ +/* XM_RX_EV_MSK 32 bit r/w Rx Counter Event Mask */ +enum { + XMR_MAX_SZ_OV = 1<<31, /* Bit 31: 1024-MaxSize Rx Cnt Ov*/ + XMR_1023B_OV = 1<<30, /* Bit 30: 512-1023Byte Rx Cnt Ov*/ + XMR_511B_OV = 1<<29, /* Bit 29: 256-511 Byte Rx Cnt Ov*/ + XMR_255B_OV = 1<<28, /* Bit 28: 128-255 Byte Rx Cnt Ov*/ + XMR_127B_OV = 1<<27, /* Bit 27: 65-127 Byte Rx Cnt Ov */ + XMR_64B_OV = 1<<26, /* Bit 26: 64 Byte Rx Cnt Ov */ + XMR_UTIL_OV = 1<<25, /* Bit 25: Rx Util Cnt Overflow */ + XMR_UTIL_UR = 1<<24, /* Bit 24: Rx Util Cnt Underrun */ + XMR_CEX_ERR_OV = 1<<23, /* Bit 23: CEXT Err Cnt Ov */ + XMR_FCS_ERR_OV = 1<<21, /* Bit 21: Rx FCS Error Cnt Ov */ + XMR_LNG_ERR_OV = 1<<20, /* Bit 20: Rx too Long Err Cnt Ov*/ + XMR_RUNT_OV = 1<<19, /* Bit 19: Runt Event Cnt Ov */ + XMR_SHT_ERR_OV = 1<<18, /* Bit 18: Rx Short Ev Err Cnt Ov*/ + XMR_SYM_ERR_OV = 1<<17, /* Bit 17: Rx Sym Err Cnt Ov */ + XMR_CAR_ERR_OV = 1<<15, /* Bit 15: Rx Carr Ev Err Cnt Ov */ + XMR_JAB_PKT_OV = 1<<14, /* Bit 14: Rx Jabb Packet Cnt Ov */ + XMR_FIFO_OV = 1<<13, /* Bit 13: Rx FIFO Ov Ev Cnt Ov */ + XMR_FRA_ERR_OV = 1<<12, /* Bit 12: Rx Framing Err Cnt Ov */ + XMR_FMISS_OV = 1<<11, /* Bit 11: Rx Missed Ev Cnt Ov */ + XMR_BURST = 1<<10, /* Bit 10: Rx Burst Event Cnt Ov */ + XMR_INV_MOC = 1<<9, /* Bit 9: Rx with inv. MAC OC Ov*/ + XMR_INV_MP = 1<<8, /* Bit 8: Rx inv Pause Frame Ov */ + XMR_MCTRL_OV = 1<<7, /* Bit 7: Rx MAC Ctrl-F Cnt Ov */ + XMR_MPAUSE_OV = 1<<6, /* Bit 6: Rx Pause MAC Ctrl-F Ov*/ + XMR_UC_OK_OV = 1<<5, /* Bit 5: Rx Unicast Frame CntOv*/ + XMR_MC_OK_OV = 1<<4, /* Bit 4: Rx Multicast Cnt Ov */ + XMR_BC_OK_OV = 1<<3, /* Bit 3: Rx Broadcast Cnt Ov */ + XMR_OK_LO_OV = 1<<2, /* Bit 2: Octets Rx OK Low CntOv*/ + XMR_OK_HI_OV = 1<<1, /* Bit 1: Octets Rx OK Hi Cnt Ov*/ + XMR_OK_OV = 1<<0, /* Bit 0: Frames Received Ok Ov */ +}; + +#define XMR_DEF_MSK (XMR_OK_LO_OV | XMR_OK_HI_OV) + +/* XM_TX_CNT_EV 32 bit r/o Tx Counter Event Register */ +/* XM_TX_EV_MSK 32 bit r/w Tx Counter Event Mask */ +enum { + XMT_MAX_SZ_OV = 1<<25, /* Bit 25: 1024-MaxSize Tx Cnt Ov*/ + XMT_1023B_OV = 1<<24, /* Bit 24: 512-1023Byte Tx Cnt Ov*/ + XMT_511B_OV = 1<<23, /* Bit 23: 256-511 Byte Tx Cnt Ov*/ + XMT_255B_OV = 1<<22, /* Bit 22: 128-255 Byte Tx Cnt Ov*/ + XMT_127B_OV = 1<<21, /* Bit 21: 65-127 Byte Tx Cnt Ov */ + XMT_64B_OV = 1<<20, /* Bit 20: 64 Byte Tx Cnt Ov */ + XMT_UTIL_OV = 1<<19, /* Bit 19: Tx Util Cnt Overflow */ + XMT_UTIL_UR = 1<<18, /* Bit 18: Tx Util Cnt Underrun */ + XMT_CS_ERR_OV = 1<<17, /* Bit 17: Tx Carr Sen Err Cnt Ov*/ + XMT_FIFO_UR_OV = 1<<16, /* Bit 16: Tx FIFO Ur Ev Cnt Ov */ + XMT_EX_DEF_OV = 1<<15, /* Bit 15: Tx Ex Deferall Cnt Ov */ + XMT_DEF = 1<<14, /* Bit 14: Tx Deferred Cnt Ov */ + XMT_LAT_COL_OV = 1<<13, /* Bit 13: Tx Late Col Cnt Ov */ + XMT_ABO_COL_OV = 1<<12, /* Bit 12: Tx abo dueto Ex Col Ov*/ + XMT_MUL_COL_OV = 1<<11, /* Bit 11: Tx Mult Col Cnt Ov */ + XMT_SNG_COL = 1<<10, /* Bit 10: Tx Single Col Cnt Ov */ + XMT_MCTRL_OV = 1<<9, /* Bit 9: Tx MAC Ctrl Counter Ov*/ + XMT_MPAUSE = 1<<8, /* Bit 8: Tx Pause MAC Ctrl-F Ov*/ + XMT_BURST = 1<<7, /* Bit 7: Tx Burst Event Cnt Ov */ + XMT_LONG = 1<<6, /* Bit 6: Tx Long Frame Cnt Ov */ + XMT_UC_OK_OV = 1<<5, /* Bit 5: Tx Unicast Cnt Ov */ + XMT_MC_OK_OV = 1<<4, /* Bit 4: Tx Multicast Cnt Ov */ + XMT_BC_OK_OV = 1<<3, /* Bit 3: Tx Broadcast Cnt Ov */ + XMT_OK_LO_OV = 1<<2, /* Bit 2: Octets Tx OK Low CntOv*/ + XMT_OK_HI_OV = 1<<1, /* Bit 1: Octets Tx OK Hi Cnt Ov*/ + XMT_OK_OV = 1<<0, /* Bit 0: Frames Tx Ok Ov */ +}; + +#define XMT_DEF_MSK (XMT_OK_LO_OV | XMT_OK_HI_OV) + +struct skge_rx_desc { + u32 control; + u32 next_offset; + u32 dma_lo; + u32 dma_hi; + u32 status; + u32 timestamp; + u16 csum2; + u16 csum1; + u16 csum2_start; + u16 csum1_start; +}; + +struct skge_tx_desc { + u32 control; + u32 next_offset; + u32 dma_lo; + u32 dma_hi; + u32 status; + u32 csum_offs; + u16 csum_write; + u16 csum_start; + u32 rsvd; +}; + +struct skge_element { + struct skge_element *next; + void *desc; + struct sk_buff *skb; + DECLARE_PCI_UNMAP_ADDR(mapaddr); + DECLARE_PCI_UNMAP_LEN(maplen); +}; + +struct skge_ring { + struct skge_element *to_clean; + struct skge_element *to_use; + struct skge_element *start; + unsigned long count; +}; + + +struct skge_hw { + void __iomem *regs; + struct pci_dev *pdev; + u32 intr_mask; + struct net_device *dev[2]; + + u8 mac_cfg; + u8 chip_id; + u8 phy_type; + u8 pmd_type; + u16 phy_addr; + + u32 ram_size; + u32 ram_offset; + + struct tasklet_struct ext_tasklet; + spinlock_t phy_lock; +}; + +static inline int isdualport(const struct skge_hw *hw) +{ + return !(hw->mac_cfg & CFG_SNG_MAC); +} + +static inline u8 chip_rev(const struct skge_hw *hw) +{ + return (hw->mac_cfg & CFG_CHIP_R_MSK) >> 4; +} + +static inline int iscopper(const struct skge_hw *hw) +{ + return (hw->pmd_type == 'T'); +} + +enum { + FLOW_MODE_NONE = 0, /* No Flow-Control */ + FLOW_MODE_LOC_SEND = 1, /* Local station sends PAUSE */ + FLOW_MODE_REM_SEND = 2, /* Symmetric or just remote */ + FLOW_MODE_SYMMETRIC = 3, /* Both stations may send PAUSE */ +}; + +struct skge_port { + u32 msg_enable; + struct skge_hw *hw; + struct net_device *netdev; + int port; + + spinlock_t tx_lock; + u32 tx_avail; + struct skge_ring tx_ring; + struct skge_ring rx_ring; + + struct net_device_stats net_stats; + + u8 rx_csum; + u8 blink_on; + u8 flow_control; + u8 wol; + u8 autoneg; /* AUTONEG_ENABLE, AUTONEG_DISABLE */ + u8 duplex; /* DUPLEX_HALF, DUPLEX_FULL */ + u16 speed; /* SPEED_1000, SPEED_100, ... */ + u32 advertising; + + void *mem; /* PCI memory for rings */ + dma_addr_t dma; + unsigned long mem_size; + + struct timer_list link_check; + struct timer_list led_blink; +}; + + +/* Register accessor for memory mapped device */ +static inline u32 skge_read32(const struct skge_hw *hw, int reg) +{ + return readl(hw->regs + reg); + +} + +static inline u16 skge_read16(const struct skge_hw *hw, int reg) +{ + return readw(hw->regs + reg); +} + +static inline u8 skge_read8(const struct skge_hw *hw, int reg) +{ + return readb(hw->regs + reg); +} + +static inline void skge_write32(const struct skge_hw *hw, int reg, u32 val) +{ + writel(val, hw->regs + reg); +} + +static inline void skge_write16(const struct skge_hw *hw, int reg, u16 val) +{ + writew(val, hw->regs + reg); +} + +static inline void skge_write8(const struct skge_hw *hw, int reg, u8 val) +{ + writeb(val, hw->regs + reg); +} + +/* MAC Related Registers inside the device. */ +#define SKGEMAC_REG(port,reg) (((port)<<7)+(reg)) + +/* PCI config space can be accessed via memory mapped space */ +#define SKGEPCI_REG(reg) ((reg)+ 0x380) + +#define SKGEXM_REG(port, reg) \ + ((BASE_XMAC_1 + (port) * (BASE_XMAC_2 - BASE_XMAC_1)) | (reg) << 1) + +static inline u32 skge_xm_read32(const struct skge_hw *hw, int port, int reg) +{ + return skge_read32(hw, SKGEXM_REG(port,reg)); +} + +static inline u16 skge_xm_read16(const struct skge_hw *hw, int port, int reg) +{ + return skge_read16(hw, SKGEXM_REG(port,reg)); +} + +static inline u8 skge_xm_read8(const struct skge_hw *hw, int port, int reg) +{ + return skge_read8(hw, SKGEXM_REG(port,reg)); +} + +static inline void skge_xm_write32(const struct skge_hw *hw, int port, int r, u32 v) +{ + skge_write32(hw, SKGEXM_REG(port,r), v); +} + +static inline void skge_xm_write16(const struct skge_hw *hw, int port, int r, u16 v) +{ + skge_write16(hw, SKGEXM_REG(port,r), v); +} + +static inline void skge_xm_write8(const struct skge_hw *hw, int port, int r, u8 v) +{ + skge_write8(hw, SKGEXM_REG(port,r), v); +} + +static inline void skge_xm_outhash(const struct skge_hw *hw, int port, int reg, + const u8 *hash) +{ + skge_xm_write16(hw, port, reg, + (u16)hash[0] | ((u16)hash[1] << 8)); + skge_xm_write16(hw, port, reg+2, + (u16)hash[2] | ((u16)hash[3] << 8)); + skge_xm_write16(hw, port, reg+4, + (u16)hash[4] | ((u16)hash[5] << 8)); + skge_xm_write16(hw, port, reg+6, + (u16)hash[6] | ((u16)hash[7] << 8)); +} + +static inline void skge_xm_outaddr(const struct skge_hw *hw, int port, int reg, + const u8 *addr) +{ + skge_xm_write16(hw, port, reg, + (u16)addr[0] | ((u16)addr[1] << 8)); + skge_xm_write16(hw, port, reg, + (u16)addr[2] | ((u16)addr[3] << 8)); + skge_xm_write16(hw, port, reg, + (u16)addr[4] | ((u16)addr[5] << 8)); +} + + +#define SKGEGMA_REG(port,reg) \ + ((reg) + BASE_GMAC_1 + \ + (port) * (BASE_GMAC_2-BASE_GMAC_1)) + +static inline u16 skge_gma_read16(const struct skge_hw *hw, int port, int reg) +{ + return skge_read16(hw, SKGEGMA_REG(port,reg)); +} + +static inline u32 skge_gma_read32(const struct skge_hw *hw, int port, int reg) +{ + return (u32) skge_read16(hw, SKGEGMA_REG(port,reg)) + | ((u32)skge_read16(hw, SKGEGMA_REG(port,reg+4)) << 16); +} + +static inline u8 skge_gma_read8(const struct skge_hw *hw, int port, int reg) +{ + return skge_read8(hw, SKGEGMA_REG(port,reg)); +} + +static inline void skge_gma_write16(const struct skge_hw *hw, int port, int r, u16 v) +{ + skge_write16(hw, SKGEGMA_REG(port,r), v); +} + +static inline void skge_gma_write32(const struct skge_hw *hw, int port, int r, u32 v) +{ + skge_write16(hw, SKGEGMA_REG(port, r), (u16) v); + skge_write32(hw, SKGEGMA_REG(port, r+4), (u16)(v >> 16)); +} + +static inline void skge_gma_write8(const struct skge_hw *hw, int port, int r, u8 v) +{ + skge_write8(hw, SKGEGMA_REG(port,r), v); +} + +static inline void skge_gm_set_addr(struct skge_hw *hw, int port, int reg, + const u8 *addr) +{ + skge_gma_write16(hw, port, reg, + (u16) addr[0] | ((u16) addr[1] << 8)); + skge_gma_write16(hw, port, reg+4, + (u16) addr[2] | ((u16) addr[3] << 8)); + skge_gma_write16(hw, port, reg+8, + (u16) addr[4] | ((u16) addr[5] << 8)); +} + +#endif -- cgit v1.2.3 From fdecea66687d76c7d19be6559586df5c51023d11 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 12 May 2005 20:16:24 -0400 Subject: [netdrvr starfire] Add GPL'd firmware, remove compat code Contributed by Ion Badulescu , further fixed up by me. --- drivers/net/starfire.c | 142 +++++------------ drivers/net/starfire_firmware.h | 346 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 386 insertions(+), 102 deletions(-) create mode 100644 drivers/net/starfire_firmware.h (limited to 'drivers/net') diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c index 236bdd3f6ba..12e2b6826fa 100644 --- a/drivers/net/starfire.c +++ b/drivers/net/starfire.c @@ -2,7 +2,7 @@ /* Written 1998-2000 by Donald Becker. - Current maintainer is Ion Badulescu . Please + Current maintainer is Ion Badulescu . Please send all bug reports to me, and not to Donald Becker, as this code has been heavily modified from Donald's original version. @@ -129,12 +129,18 @@ - put the chip to a D3 slumber on driver unload - added config option to enable/disable NAPI -TODO: bugfixes (no bugs known as of right now) + LK1.4.2 (Ion Badulescu) + - finally added firmware (GPL'ed by Adaptec) + - removed compatibility code for 2.2.x + +TODO: - fix forced speed/duplexing code (broken a long time ago, when + somebody converted the driver to use the generic MII code) + - fix VLAN support */ #define DRV_NAME "starfire" -#define DRV_VERSION "1.03+LK1.4.1" -#define DRV_RELDATE "February 10, 2002" +#define DRV_VERSION "1.03+LK1.4.2" +#define DRV_RELDATE "January 19, 2005" #include #include @@ -145,25 +151,15 @@ TODO: bugfixes (no bugs known as of right now) #include #include #include +#include +#include +#include +#include #include /* Processor type for cache alignment. */ #include #include -/* - * Adaptec's license for their drivers (which is where I got the - * firmware files) does not allow one to redistribute them. Thus, we can't - * include the firmware with this driver. - * - * However, should a legal-to-distribute firmware become available, - * the driver developer would need only to obtain the firmware in the - * form of a C header file. - * Once that's done, the #undef below must be changed into a #define - * for this driver to really use the firmware. Note that Rx/Tx - * hardware TCP checksumming is not possible without the firmware. - * - * WANTED: legal firmware to include with this GPL'd driver. - */ -#undef HAS_FIRMWARE +#include "starfire_firmware.h" /* * The current frame processor firmware fails to checksum a fragment * of length 1. If and when this is fixed, the #define below can be removed. @@ -172,13 +168,7 @@ TODO: bugfixes (no bugs known as of right now) /* * Define this if using the driver with the zero-copy patch */ -#if defined(HAS_FIRMWARE) && defined(MAX_SKB_FRAGS) #define ZEROCOPY -#endif - -#ifdef HAS_FIRMWARE -#include "starfire_firmware.h" -#endif /* HAS_FIRMWARE */ #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) #define VLAN_SUPPORT @@ -202,11 +192,7 @@ static int mtu; The Starfire has a 512 element hash table based on the Ethernet CRC. */ static int multicast_filter_limit = 512; /* Whether to do TCP/UDP checksums in hardware */ -#ifdef HAS_FIRMWARE static int enable_hw_cksum = 1; -#else -static int enable_hw_cksum = 0; -#endif #define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/ /* @@ -291,43 +277,15 @@ static int full_duplex[MAX_UNITS] = {0, }; #define RX_DESC_ADDR_SIZE RxDescAddr32bit #endif -#ifdef MAX_SKB_FRAGS #define skb_first_frag_len(skb) skb_headlen(skb) #define skb_num_frags(skb) (skb_shinfo(skb)->nr_frags + 1) -#else /* not MAX_SKB_FRAGS */ -#define skb_first_frag_len(skb) (skb->len) -#define skb_num_frags(skb) 1 -#endif /* not MAX_SKB_FRAGS */ - -/* 2.2.x compatibility code */ -#if LINUX_VERSION_CODE < 0x20300 - -#include "starfire-kcomp22.h" - -#else /* LINUX_VERSION_CODE > 0x20300 */ - -#include -#include -#include - -#include - -#define init_tx_timer(dev, func, timeout) \ - dev->tx_timeout = func; \ - dev->watchdog_timeo = timeout; -#define kick_tx_timer(dev, func, timeout) - -#define netif_start_if(dev) -#define netif_stop_if(dev) - -#define PCI_SLOT_NAME(pci_dev) pci_name(pci_dev) - -#endif /* LINUX_VERSION_CODE > 0x20300 */ #ifdef HAVE_NETDEV_POLL #define init_poll(dev) \ +do { \ dev->poll = &netdev_poll; \ - dev->weight = max_interrupt_work; + dev->weight = max_interrupt_work; \ +} while (0) #define netdev_rx(dev, ioaddr) \ do { \ u32 intr_enable; \ @@ -341,7 +299,7 @@ do { \ /* Paranoia check */ \ intr_enable = readl(ioaddr + IntrEnable); \ if (intr_enable & (IntrRxDone | IntrRxEmpty)) { \ - printk("%s: interrupt while in polling mode!\n", dev->name); \ + printk(KERN_INFO "%s: interrupt while in polling mode!\n", dev->name); \ intr_enable &= ~(IntrRxDone | IntrRxEmpty); \ writel(intr_enable, ioaddr + IntrEnable); \ } \ @@ -371,6 +329,7 @@ KERN_INFO " (unofficial 2.2/2.4 kernel port, version " DRV_VERSION ", " DRV_RELD MODULE_AUTHOR("Donald Becker "); MODULE_DESCRIPTION("Adaptec Starfire Ethernet driver"); MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); module_param(max_interrupt_work, int, 0); module_param(mtu, int, 0); @@ -425,7 +384,7 @@ on the 32/64 bitness of the architecture), and relies on automatic minimum-length padding. It does not use the completion queue consumer index, but instead checks for non-zero status entries. -For receive this driver uses type 0/1/2/3 receive descriptors. The driver +For receive this driver uses type 2/3 receive descriptors. The driver allocates full frame size skbuffs for the Rx ring buffers, so all frames should fit in a single descriptor. The driver does not use the completion queue consumer index, but instead checks for non-zero status entries. @@ -476,7 +435,7 @@ IVc. Errata */ - + enum chip_capability_flags {CanHaveMII=1, }; @@ -670,7 +629,6 @@ struct full_rx_done_desc { u32 timestamp; }; /* XXX: this is ugly and I'm not sure it's worth the trouble -Ion */ -#ifdef HAS_FIRMWARE #ifdef VLAN_SUPPORT typedef struct full_rx_done_desc rx_done_desc; #define RxComplType RxComplType3 @@ -678,15 +636,6 @@ typedef struct full_rx_done_desc rx_done_desc; typedef struct csum_rx_done_desc rx_done_desc; #define RxComplType RxComplType2 #endif /* not VLAN_SUPPORT */ -#else /* not HAS_FIRMWARE */ -#ifdef VLAN_SUPPORT -typedef struct basic_rx_done_desc rx_done_desc; -#define RxComplType RxComplType1 -#else /* not VLAN_SUPPORT */ -typedef struct short_rx_done_desc rx_done_desc; -#define RxComplType RxComplType0 -#endif /* not VLAN_SUPPORT */ -#endif /* not HAS_FIRMWARE */ enum rx_done_bits { RxOK=0x20000000, RxFIFOErr=0x10000000, RxBufQ2=0x08000000, @@ -898,13 +847,10 @@ static int __devinit starfire_init_one(struct pci_dev *pdev, /* enable MWI -- it vastly improves Rx performance on sparc64 */ pci_set_mwi(pdev); -#ifdef MAX_SKB_FRAGS - dev->features |= NETIF_F_SG; -#endif /* MAX_SKB_FRAGS */ #ifdef ZEROCOPY /* Starfire can do TCP/UDP checksumming */ if (enable_hw_cksum) - dev->features |= NETIF_F_IP_CSUM; + dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG; #endif /* ZEROCOPY */ #ifdef VLAN_SUPPORT dev->features |= NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER; @@ -1008,7 +954,8 @@ static int __devinit starfire_init_one(struct pci_dev *pdev, /* The chip-specific entries in the device structure. */ dev->open = &netdev_open; dev->hard_start_xmit = &start_tx; - init_tx_timer(dev, tx_timeout, TX_TIMEOUT); + dev->tx_timeout = tx_timeout; + dev->watchdog_timeo = TX_TIMEOUT; init_poll(dev); dev->stop = &netdev_close; dev->get_stats = &get_stats; @@ -1039,7 +986,7 @@ static int __devinit starfire_init_one(struct pci_dev *pdev, if ((mdio_read(dev, phy, MII_BMCR) & BMCR_RESET) == 0) break; if (boguscnt == 0) { - printk("%s: PHY reset never completed!\n", dev->name); + printk("%s: PHY#%d reset never completed!\n", dev->name, phy); continue; } mii_status = mdio_read(dev, phy, MII_BMSR); @@ -1110,6 +1057,7 @@ static int netdev_open(struct net_device *dev) size_t tx_done_q_size, rx_done_q_size, tx_ring_size, rx_ring_size; /* Do we ever need to reset the chip??? */ + retval = request_irq(dev->irq, &intr_handler, SA_SHIRQ, dev->name, dev); if (retval) return retval; @@ -1211,7 +1159,6 @@ static int netdev_open(struct net_device *dev) writel(np->intr_timer_ctrl, ioaddr + IntrTimerCtrl); - netif_start_if(dev); netif_start_queue(dev); if (debug > 1) @@ -1238,13 +1185,11 @@ static int netdev_open(struct net_device *dev) writel(ETH_P_8021Q, ioaddr + VlanType); #endif /* VLAN_SUPPORT */ -#ifdef HAS_FIRMWARE /* Load Rx/Tx firmware into the frame processors */ for (i = 0; i < FIRMWARE_RX_SIZE * 2; i++) writel(firmware_rx[i], ioaddr + RxGfpMem + i * 4); for (i = 0; i < FIRMWARE_TX_SIZE * 2; i++) writel(firmware_tx[i], ioaddr + TxGfpMem + i * 4); -#endif /* HAS_FIRMWARE */ if (enable_hw_cksum) /* Enable the Rx and Tx units, and the Rx/Tx frame processors. */ writel(TxEnable|TxGFPEnable|RxEnable|RxGFPEnable, ioaddr + GenCtrl); @@ -1378,8 +1323,6 @@ static int start_tx(struct sk_buff *skb, struct net_device *dev) u32 status; int i; - kick_tx_timer(dev, tx_timeout, TX_TIMEOUT); - /* * be cautious here, wrapping the queue has weird semantics * and we may not have enough slots even when it seems we do. @@ -1404,7 +1347,7 @@ static int start_tx(struct sk_buff *skb, struct net_device *dev) } if (has_bad_length) - skb_checksum_help(skb); + skb_checksum_help(skb, 0); } #endif /* ZEROCOPY && HAS_BROKEN_FIRMWARE */ @@ -1433,12 +1376,10 @@ static int start_tx(struct sk_buff *skb, struct net_device *dev) np->tx_info[entry].mapping = pci_map_single(np->pci_dev, skb->data, skb_first_frag_len(skb), PCI_DMA_TODEVICE); } else { -#ifdef MAX_SKB_FRAGS skb_frag_t *this_frag = &skb_shinfo(skb)->frags[i - 1]; status |= this_frag->size; np->tx_info[entry].mapping = pci_map_single(np->pci_dev, page_address(this_frag->page) + this_frag->page_offset, this_frag->size, PCI_DMA_TODEVICE); -#endif /* MAX_SKB_FRAGS */ } np->tx_ring[entry].addr = cpu_to_dma(np->tx_info[entry].mapping); @@ -1531,7 +1472,6 @@ static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *rgs np->tx_info[entry].mapping = 0; np->dirty_tx += np->tx_info[entry].used_slots; entry = (entry + np->tx_info[entry].used_slots) % TX_RING_SIZE; -#ifdef MAX_SKB_FRAGS { int i; for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { @@ -1543,7 +1483,7 @@ static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *rgs entry++; } } -#endif /* MAX_SKB_FRAGS */ + dev_kfree_skb_irq(skb); } np->tx_done_q[np->tx_done].status = 0; @@ -1603,7 +1543,7 @@ static int __netdev_rx(struct net_device *dev, int *quota) if (debug > 4) printk(KERN_DEBUG " netdev_rx() status of %d was %#8.8x.\n", np->rx_done, desc_status); if (!(desc_status & RxOK)) { - /* There was a error. */ + /* There was an error. */ if (debug > 2) printk(KERN_DEBUG " netdev_rx() Rx error was %#8.8x.\n", desc_status); np->stats.rx_errors++; @@ -1656,11 +1596,10 @@ static int __netdev_rx(struct net_device *dev, int *quota) #endif skb->protocol = eth_type_trans(skb, dev); -#if defined(HAS_FIRMWARE) || defined(VLAN_SUPPORT) +#ifdef VLAN_SUPPORT if (debug > 4) printk(KERN_DEBUG " netdev_rx() status2 of %d was %#4.4x.\n", np->rx_done, le16_to_cpu(desc->status2)); #endif -#ifdef HAS_FIRMWARE if (le16_to_cpu(desc->status2) & 0x0100) { skb->ip_summed = CHECKSUM_UNNECESSARY; np->stats.rx_compressed++; @@ -1679,7 +1618,6 @@ static int __netdev_rx(struct net_device *dev, int *quota) skb->csum = le16_to_cpu(desc->csum); printk(KERN_DEBUG "%s: checksum_hw, status2 = %#x\n", dev->name, le16_to_cpu(desc->status2)); } -#endif /* HAS_FIRMWARE */ #ifdef VLAN_SUPPORT if (np->vlgrp && le16_to_cpu(desc->status2) & 0x0200) { if (debug > 4) @@ -1900,9 +1838,6 @@ static struct net_device_stats *get_stats(struct net_device *dev) } -/* Chips may use the upper or lower CRC bits, and may reverse and/or invert - them. Select the endian-ness that results in minimal calculations. -*/ static void set_rx_mode(struct net_device *dev) { struct netdev_private *np = netdev_priv(dev); @@ -1969,6 +1904,8 @@ static void set_rx_mode(struct net_device *dev) memset(mc_filter, 0, sizeof(mc_filter)); for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; i++, mclist = mclist->next) { + /* The chip uses the upper 9 CRC bits + as index into the hash table */ int bit_nr = ether_crc_le(ETH_ALEN, mclist->dmi_addr) >> 23; __u32 *fptr = (__u32 *) &mc_filter[(bit_nr >> 4) & ~1]; @@ -2001,7 +1938,7 @@ static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) struct netdev_private *np = netdev_priv(dev); strcpy(info->driver, DRV_NAME); strcpy(info->version, DRV_VERSION); - strcpy(info->bus_info, PCI_SLOT_NAME(np->pci_dev)); + strcpy(info->bus_info, pci_name(np->pci_dev)); } static int get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) @@ -2083,7 +2020,6 @@ static int netdev_close(struct net_device *dev) int i; netif_stop_queue(dev); - netif_stop_if(dev); if (debug > 1) { printk(KERN_DEBUG "%s: Shutting down ethercard, Intr status %#8.8x.\n", @@ -2184,7 +2120,13 @@ static int __init starfire_init (void) /* when a module, this is printed whether or not devices are found in probe */ #ifdef MODULE printk(version); +#ifdef HAVE_NETDEV_POLL + printk(KERN_INFO DRV_NAME ": polling (NAPI) enabled\n"); +#else + printk(KERN_INFO DRV_NAME ": polling (NAPI) disabled\n"); #endif +#endif + #ifndef ADDR_64BITS /* we can do this test only at run-time... sigh */ if (sizeof(dma_addr_t) == sizeof(u64)) { @@ -2192,10 +2134,6 @@ static int __init starfire_init (void) return -ENODEV; } #endif /* not ADDR_64BITS */ -#ifndef HAS_FIRMWARE - /* unconditionally disable hw cksums if firmware is not present */ - enable_hw_cksum = 0; -#endif /* not HAS_FIRMWARE */ return pci_module_init (&starfire_driver); } diff --git a/drivers/net/starfire_firmware.h b/drivers/net/starfire_firmware.h new file mode 100644 index 00000000000..0a668528955 --- /dev/null +++ b/drivers/net/starfire_firmware.h @@ -0,0 +1,346 @@ +/* + * Copyright 2003 Adaptec, Inc. + * + * Please read the following license before using the Adaptec Software + * ("Program"). If you do not agree to the license terms, do not use the + * Program: + * + * You agree to be bound by version 2 of the General Public License ("GPL") + * dated June 1991, which can be found at http://www.fsf.org/licenses/gpl.html. + * If the link is broken, write to Free Software Foundation, 59 Temple Place, + * Boston, Massachusetts 02111-1307. + * + * BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE IT IS LICENSED "AS IS" AND + * THERE IS NO WARRANTY FOR THE PROGRAM, INCLUDING BUT NOT LIMITED TO THE + * IMPLIED WARRANTIES OF MERCHANTIBILITY OR FITNESS FOR A PARTICULAR PURPOSE + * (TO THE EXTENT PERMITTED BY APPLICABLE LAW). USE OF THE PROGRAM IS AT YOUR + * OWN RISK. IN NO EVENT WILL ADAPTEC OR ITS LICENSORS BE LIABLE TO YOU FOR + * DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM. + * + */ + +static const u32 firmware_rx[] = { + 0x010003dc, 0x00000000, + 0x04000421, 0x00000086, + 0x80000015, 0x0000180e, + 0x81000015, 0x00006664, + 0x1a0040ab, 0x00000b06, + 0x14200011, 0x00000000, + 0x14204022, 0x0000aaaa, + 0x14204022, 0x00000300, + 0x14204022, 0x00000000, + 0x1a0040ab, 0x00000b14, + 0x14200011, 0x00000000, + 0x83000015, 0x00000002, + 0x04000021, 0x00000000, + 0x00000010, 0x00000000, + 0x04000421, 0x00000087, + 0x00000010, 0x00000000, + 0x00000010, 0x00000000, + 0x00008015, 0x00000000, + 0x0000003e, 0x00000000, + 0x00000010, 0x00000000, + 0x82000015, 0x00004000, + 0x009e8050, 0x00000000, + 0x03008015, 0x00000000, + 0x86008015, 0x00000000, + 0x82000015, 0x00008000, + 0x0100001c, 0x00000000, + 0x000050a0, 0x0000010c, + 0x4e20d011, 0x00006008, + 0x1420d012, 0x00004008, + 0x0000f090, 0x00007000, + 0x0000c8b0, 0x00003000, + 0x00004040, 0x00000000, + 0x00108015, 0x00000000, + 0x00a2c150, 0x00004000, + 0x00a400b0, 0x00000014, + 0x00000020, 0x00000000, + 0x2500400d, 0x00002525, + 0x00047220, 0x00003100, + 0x00934070, 0x00000000, + 0x00000020, 0x00000000, + 0x00924460, 0x00000184, + 0x2b20c011, 0x00000000, + 0x0000c420, 0x00000540, + 0x36014018, 0x0000422d, + 0x14200011, 0x00000000, + 0x00924460, 0x00000183, + 0x3200001f, 0x00000034, + 0x02ac0015, 0x00000002, + 0x00a60110, 0x00000008, + 0x42200011, 0x00000000, + 0x00924060, 0x00000103, + 0x0000001e, 0x00000000, + 0x00000020, 0x00000100, + 0x0000001e, 0x00000000, + 0x00924460, 0x00000086, + 0x00004080, 0x00000000, + 0x0092c070, 0x00000000, + 0x00924060, 0x00000100, + 0x0000c890, 0x00005000, + 0x00a6c110, 0x00000000, + 0x00b0c090, 0x00000012, + 0x021c0015, 0x00000000, + 0x3200001f, 0x00000034, + 0x00924460, 0x00000510, + 0x44210011, 0x00000000, + 0x42000011, 0x00000000, + 0x83000015, 0x00000040, + 0x00924460, 0x00000508, + 0x45014018, 0x00004545, + 0x00808050, 0x00000000, + 0x62208012, 0x00000000, + 0x82000015, 0x00000800, + 0x15200011, 0x00000000, + 0x00000010, 0x00000000, + 0x00000010, 0x00000000, + 0x00000010, 0x00000000, + 0x00000010, 0x00000000, + 0x00000010, 0x00000000, + 0x80000015, 0x0000eea4, + 0x81000015, 0x0000005f, + 0x00000060, 0x00000000, + 0x00004120, 0x00000000, + 0x00004a00, 0x00004000, + 0x00924460, 0x00000190, + 0x5601401a, 0x00005956, + 0x14000011, 0x00000000, + 0x00934050, 0x00000018, + 0x00930050, 0x00000018, + 0x3601403a, 0x0000002d, + 0x000643a9, 0x00000000, + 0x0000c420, 0x00000140, + 0x5601401a, 0x00005956, + 0x14000011, 0x00000000, + 0x00000010, 0x00000000, + 0x00000010, 0x00000000, + 0x000642a9, 0x00000000, + 0x00024420, 0x00000183, + 0x5601401a, 0x00005956, + 0x82000015, 0x00002000, + 0x15200011, 0x00000000, + 0x82000015, 0x00000010, + 0x15200011, 0x00000000, + 0x82000015, 0x00000010, + 0x15200011, 0x00000000, +}; /* 104 Rx instructions */ +#define FIRMWARE_RX_SIZE 104 + +static const u32 firmware_tx[] = { + 0x010003dc, 0x00000000, + 0x04000421, 0x00000086, + 0x80000015, 0x0000180e, + 0x81000015, 0x00006664, + 0x1a0040ab, 0x00000b06, + 0x14200011, 0x00000000, + 0x14204022, 0x0000aaaa, + 0x14204022, 0x00000300, + 0x14204022, 0x00000000, + 0x1a0040ab, 0x00000b14, + 0x14200011, 0x00000000, + 0x83000015, 0x00000002, + 0x04000021, 0x00000000, + 0x00000010, 0x00000000, + 0x04000421, 0x00000087, + 0x00000010, 0x00000000, + 0x00000010, 0x00000000, + 0x00008015, 0x00000000, + 0x0000003e, 0x00000000, + 0x00000010, 0x00000000, + 0x82000015, 0x00004000, + 0x009e8050, 0x00000000, + 0x03008015, 0x00000000, + 0x86008015, 0x00000000, + 0x82000015, 0x00008000, + 0x0100001c, 0x00000000, + 0x000050a0, 0x0000010c, + 0x4e20d011, 0x00006008, + 0x1420d012, 0x00004008, + 0x0000f090, 0x00007000, + 0x0000c8b0, 0x00003000, + 0x00004040, 0x00000000, + 0x00108015, 0x00000000, + 0x00a2c150, 0x00004000, + 0x00a400b0, 0x00000014, + 0x00000020, 0x00000000, + 0x2500400d, 0x00002525, + 0x00047220, 0x00003100, + 0x00934070, 0x00000000, + 0x00000020, 0x00000000, + 0x00924460, 0x00000184, + 0x2b20c011, 0x00000000, + 0x0000c420, 0x00000540, + 0x36014018, 0x0000422d, + 0x14200011, 0x00000000, + 0x00924460, 0x00000183, + 0x3200001f, 0x00000034, + 0x02ac0015, 0x00000002, + 0x00a60110, 0x00000008, + 0x42200011, 0x00000000, + 0x00924060, 0x00000103, + 0x0000001e, 0x00000000, + 0x00000020, 0x00000100, + 0x0000001e, 0x00000000, + 0x00924460, 0x00000086, + 0x00004080, 0x00000000, + 0x0092c070, 0x00000000, + 0x00924060, 0x00000100, + 0x0000c890, 0x00005000, + 0x00a6c110, 0x00000000, + 0x00b0c090, 0x00000012, + 0x021c0015, 0x00000000, + 0x3200001f, 0x00000034, + 0x00924460, 0x00000510, + 0x44210011, 0x00000000, + 0x42000011, 0x00000000, + 0x83000015, 0x00000040, + 0x00924460, 0x00000508, + 0x45014018, 0x00004545, + 0x00808050, 0x00000000, + 0x62208012, 0x00000000, + 0x82000015, 0x00000800, + 0x15200011, 0x00000000, + 0x00000010, 0x00000000, + 0x00000010, 0x00000000, + 0x00000010, 0x00000000, + 0x00000010, 0x00000000, + 0x00000010, 0x00000000, + 0x80000015, 0x0000eea4, + 0x81000015, 0x0000005f, + 0x00000060, 0x00000000, + 0x00004120, 0x00000000, + 0x00004a00, 0x00004000, + 0x00924460, 0x00000190, + 0x5601401a, 0x00005956, + 0x14000011, 0x00000000, + 0x00934050, 0x00000018, + 0x00930050, 0x00000018, + 0x3601403a, 0x0000002d, + 0x000643a9, 0x00000000, + 0x0000c420, 0x00000140, + 0x5601401a, 0x00005956, + 0x14000011, 0x00000000, + 0x00000010, 0x00000000, + 0x00000010, 0x00000000, + 0x000642a9, 0x00000000, + 0x00024420, 0x00000183, + 0x5601401a, 0x00005956, + 0x82000015, 0x00002000, + 0x15200011, 0x00000000, + 0x82000015, 0x00000010, + 0x15200011, 0x00000000, + 0x82000015, 0x00000010, + 0x15200011, 0x00000000, +}; /* 104 Tx instructions */ +#define FIRMWARE_TX_SIZE 104 +#if 0 +static const u32 firmware_wol[] = { + 0x010003dc, 0x00000000, + 0x19000421, 0x00000087, + 0x80000015, 0x00001a1a, + 0x81000015, 0x00001a1a, + 0x1a0040ab, 0x00000b06, + 0x15200011, 0x00000000, + 0x15204022, 0x0000aaaa, + 0x15204022, 0x00000300, + 0x15204022, 0x00000000, + 0x1a0040ab, 0x00000b15, + 0x15200011, 0x00000000, + 0x83000015, 0x00000002, + 0x04000021, 0x00000000, + 0x00000010, 0x00000000, + 0x04000421, 0x00000087, + 0x00000010, 0x00000000, + 0x00000010, 0x00000000, + 0x00008015, 0x00000000, + 0x0000003e, 0x00000000, + 0x00000010, 0x00000000, + 0x00000010, 0x00000000, + 0x82000015, 0x00004000, + 0x82000015, 0x00008000, + 0x0000000c, 0x00000000, + 0x00000010, 0x00000000, + 0x00004080, 0x00000100, + 0x1f20c011, 0x00001122, + 0x2720f011, 0x00003011, + 0x19200071, 0x00000000, + 0x1a200051, 0x00000000, + 0x00000010, 0x00000000, + 0x00000010, 0x00000000, + 0x1d2040a4, 0x00003344, + 0x1d2040a2, 0x00005566, + 0x000040a0, 0x00000100, + 0x00108050, 0x00000001, + 0x1a208012, 0x00000006, + 0x82000015, 0x00008080, + 0x010003dc, 0x00000000, + 0x1d2040a4, 0x00002233, + 0x1d2040a4, 0x00004455, + 0x2d208011, 0x00000005, + 0x1d2040a4, 0x00006611, + 0x00108050, 0x00000001, + 0x27200011, 0x00000000, + 0x1d2050a4, 0x00006600, + 0x82000015, 0x00008080, + 0x010003dc, 0x00000000, + 0x00000050, 0x00000000, + 0x1b200031, 0x00000000, + 0x0000001e, 0x00000000, + 0x0000001e, 0x00000000, + 0x0000001e, 0x00000000, + 0x0000001e, 0x00000000, + 0x00924460, 0x00000086, + 0x00004080, 0x00000000, + 0x0092c070, 0x00000000, + 0x00924060, 0x00000100, + 0x0000c890, 0x00005000, + 0x00a6c110, 0x00000000, + 0x00b0c090, 0x00000012, + 0x021c0015, 0x00000000, + 0x3200001f, 0x00000034, + 0x00924460, 0x00000510, + 0x44210011, 0x00000000, + 0x42000011, 0x00000000, + 0x83000015, 0x00000040, + 0x00924460, 0x00000508, + 0x476a0012, 0x00000100, + 0x83000015, 0x00000008, + 0x16200011, 0x00000000, + 0x001e8050, 0x00000000, + 0x001e8050, 0x00000000, + 0x00808050, 0x00000000, + 0x03008015, 0x00000000, + 0x62208012, 0x00000000, + 0x82000015, 0x00000800, + 0x16200011, 0x00000000, + 0x80000015, 0x0000eea4, + 0x81000015, 0x0000005f, + 0x00000020, 0x00000000, + 0x00004120, 0x00000000, + 0x00004a00, 0x00004000, + 0x00924460, 0x00000190, + 0x5c01401a, 0x0000595c, + 0x15000011, 0x00000000, + 0x00934050, 0x00000018, + 0x00930050, 0x00000018, + 0x3601403a, 0x0000002d, + 0x00064029, 0x00000000, + 0x0000c420, 0x00000140, + 0x5c01401a, 0x0000595c, + 0x15000011, 0x00000000, + 0x00000010, 0x00000000, + 0x00000010, 0x00000000, + 0x00064029, 0x00000000, + 0x00024420, 0x00000183, + 0x5c01401a, 0x0000595c, + 0x82000015, 0x00002000, + 0x16200011, 0x00000000, + 0x82000015, 0x00000010, + 0x16200011, 0x00000000, + 0x82000015, 0x00000010, + 0x16200011, 0x00000000, +}; /* 104 WoL instructions */ +#define FIRMWARE_WOL_SIZE 104 +#endif -- cgit v1.2.3 From 53155109b6ac611d9bb4a4ef9d3109b219b8d0e1 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Thu, 12 May 2005 20:18:19 -0400 Subject: [PATCH] smc91x addr config check The PAGE_SIZE mask is indeed confusing. Use the exact mask for this context which has nothing to do with memory pages at all. Also cast to int since the value to compare with is an int. Signed-off-by: Nicolas Pitre Signed-off-by: Jeff Garzik --- drivers/net/smc91x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index 5e561ba4433..1e2b860dab2 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -1863,7 +1863,7 @@ static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr) SMC_SELECT_BANK(1); val = SMC_GET_BASE(); val = ((val & 0x1F00) >> 3) << SMC_IO_SHIFT; - if (((unsigned long)ioaddr & ((PAGE_SIZE-1)< Date: Thu, 12 May 2005 20:19:09 -0400 Subject: [PATCH] smc91x warning fix A few IO addr type conversions were missing. Signed-off-by: Nicolas Pitre Signed-off-by: Jeff Garzik --- drivers/net/smc91x.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index ddd2688e7d3..c3bf0cf7cf9 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -151,7 +151,7 @@ /* We actually can't write halfwords properly if not word aligned */ static inline void -SMC_outw(u16 val, unsigned long ioaddr, int reg) +SMC_outw(u16 val, void __iomem *ioaddr, int reg) { if (reg & 2) { unsigned int v = val << 16; @@ -317,7 +317,7 @@ static inline void SMC_outsw (unsigned long a, int r, unsigned char* p, int l) #define SMC_insl(a, r, p, l) \ smc_pxa_dma_insl(a, lp->physaddr, r, dev->dma, p, l) static inline void -smc_pxa_dma_insl(u_long ioaddr, u_long physaddr, int reg, int dma, +smc_pxa_dma_insl(void __iomem *ioaddr, u_long physaddr, int reg, int dma, u_char *buf, int len) { dma_addr_t dmabuf; @@ -355,7 +355,7 @@ smc_pxa_dma_insl(u_long ioaddr, u_long physaddr, int reg, int dma, #define SMC_insw(a, r, p, l) \ smc_pxa_dma_insw(a, lp->physaddr, r, dev->dma, p, l) static inline void -smc_pxa_dma_insw(u_long ioaddr, u_long physaddr, int reg, int dma, +smc_pxa_dma_insw(void __iomem *ioaddr, u_long physaddr, int reg, int dma, u_char *buf, int len) { dma_addr_t dmabuf; -- cgit v1.2.3 From e4eff7291c977308989b24fdfc7215a501302e6a Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 28 Apr 2005 19:38:30 -0700 Subject: [PATCH] e1000: made loopback test robust Added enhanced functionality to the loopback diags to wrap the descriptor rings. Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak diff -up net-drivers-2.6/drivers/net/e1000/e1000_ethtool.c net-drivers-2.6/drivers/net/e1000.new/e1000_ethtool.c --- drivers/net/e1000/e1000_ethtool.c | 81 ++++++++++++++++++++++++++++----------- 1 file changed, 58 insertions(+), 23 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 0a2ca7c73a4..fae58545346 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -919,7 +919,8 @@ e1000_setup_desc_rings(struct e1000_adapter *adapter) /* Setup Tx descriptor ring and Tx buffers */ - txdr->count = 80; + if(!txdr->count) + txdr->count = E1000_DEFAULT_TXD; size = txdr->count * sizeof(struct e1000_buffer); if(!(txdr->buffer_info = kmalloc(size, GFP_KERNEL))) { @@ -974,7 +975,8 @@ e1000_setup_desc_rings(struct e1000_adapter *adapter) /* Setup Rx descriptor ring and Rx buffers */ - rxdr->count = 80; + if(!rxdr->count) + rxdr->count = E1000_DEFAULT_RXD; size = rxdr->count * sizeof(struct e1000_buffer); if(!(rxdr->buffer_info = kmalloc(size, GFP_KERNEL))) { @@ -1310,31 +1312,62 @@ e1000_run_loopback_test(struct e1000_adapter *adapter) struct e1000_desc_ring *txdr = &adapter->test_tx_ring; struct e1000_desc_ring *rxdr = &adapter->test_rx_ring; struct pci_dev *pdev = adapter->pdev; - int i, ret_val; + int i, j, k, l, lc, good_cnt, ret_val=0; + unsigned long time; E1000_WRITE_REG(&adapter->hw, RDT, rxdr->count - 1); - for(i = 0; i < 64; i++) { - e1000_create_lbtest_frame(txdr->buffer_info[i].skb, 1024); - pci_dma_sync_single_for_device(pdev, txdr->buffer_info[i].dma, - txdr->buffer_info[i].length, - PCI_DMA_TODEVICE); - } - E1000_WRITE_REG(&adapter->hw, TDT, i); - - msec_delay(200); - - i = 0; - do { - pci_dma_sync_single_for_cpu(pdev, rxdr->buffer_info[i].dma, - rxdr->buffer_info[i].length, - PCI_DMA_FROMDEVICE); - - ret_val = e1000_check_lbtest_frame(rxdr->buffer_info[i].skb, - 1024); - i++; - } while (ret_val != 0 && i < 64); + /* Calculate the loop count based on the largest descriptor ring + * The idea is to wrap the largest ring a number of times using 64 + * send/receive pairs during each loop + */ + if(rxdr->count <= txdr->count) + lc = ((txdr->count / 64) * 2) + 1; + else + lc = ((rxdr->count / 64) * 2) + 1; + + k = l = 0; + for(j = 0; j <= lc; j++) { /* loop count loop */ + for(i = 0; i < 64; i++) { /* send the packets */ + e1000_create_lbtest_frame(txdr->buffer_info[i].skb, + 1024); + pci_dma_sync_single_for_device(pdev, + txdr->buffer_info[k].dma, + txdr->buffer_info[k].length, + PCI_DMA_TODEVICE); + if(unlikely(++k == txdr->count)) k = 0; + } + E1000_WRITE_REG(&adapter->hw, TDT, k); + msec_delay(200); + time = jiffies; /* set the start time for the receive */ + good_cnt = 0; + do { /* receive the sent packets */ + pci_dma_sync_single_for_cpu(pdev, + rxdr->buffer_info[l].dma, + rxdr->buffer_info[l].length, + PCI_DMA_FROMDEVICE); + + ret_val = e1000_check_lbtest_frame( + rxdr->buffer_info[l].skb, + 1024); + if(!ret_val) + good_cnt++; + if(unlikely(++l == rxdr->count)) l = 0; + /* time + 20 msecs (200 msecs on 2.4) is more than + * enough time to complete the receives, if it's + * exceeded, break and error off + */ + } while (good_cnt < 64 && jiffies < (time + 20)); + if(good_cnt != 64) { + ret_val = 13; /* ret_val is the same as mis-compare */ + break; + } + if(jiffies >= (time + 2)) { + ret_val = 14; /* error code for time out error */ + break; + } + } /* end loop count loop */ return ret_val; } @@ -1371,6 +1404,8 @@ e1000_link_test(struct e1000_adapter *adapter, uint64_t *data) *data = 1; } else { e1000_check_for_link(&adapter->hw); + if(adapter->hw.autoneg) /* if auto_neg is set wait for it */ + msec_delay(4000); if(!(E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU)) { *data = 1; -- cgit v1.2.3 From df25e164878836196ee93d1a5757867da6eac30e Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 28 Apr 2005 19:38:43 -0700 Subject: [PATCH] e1000: Fix msec-delay definition to use msleep Fix msec-delay definition in e1000_osdep.h to use msleep Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak diff -up net-drivers-2.6/drivers/net/e1000/e1000_osdep.h net-drivers-2.6/drivers/net/e1000.new/e1000_osdep.h --- drivers/net/e1000/e1000_osdep.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_osdep.h b/drivers/net/e1000/e1000_osdep.h index 970c656a517..2efa3b1b64d 100644 --- a/drivers/net/e1000/e1000_osdep.h +++ b/drivers/net/e1000/e1000_osdep.h @@ -42,7 +42,12 @@ #include #ifndef msec_delay -#define msec_delay(x) msleep(x) +#define msec_delay(x) do { if(in_interrupt()) { \ + /* Don't mdelay in interrupt context! */ \ + BUG(); \ + } else { \ + msleep(x); \ + } } while(0) /* Some workarounds require millisecond delays and are run during interrupt * context. Most notably, when establishing link, the phy may need tweaking -- cgit v1.2.3 From fa4f7ef3aaa6cee6b04ebe90266ee893e0b2ce07 Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 28 Apr 2005 19:39:13 -0700 Subject: [PATCH] e1000: MSI support for PCI-e adapters MSI support for PCI-e adapters Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak diff -up net-drivers-2.6/drivers/net/e1000/e1000.h net-drivers-2.6/drivers/net/e1000.new/e1000.h --- drivers/net/e1000/e1000.h | 3 +++ drivers/net/e1000/e1000_main.c | 15 +++++++++++++++ 2 files changed, 18 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h index 148930d4e9b..da055520daa 100644 --- a/drivers/net/e1000/e1000.h +++ b/drivers/net/e1000/e1000.h @@ -257,5 +257,8 @@ struct e1000_adapter { int msg_enable; +#ifdef CONFIG_PCI_MSI + boolean_t have_msi; +#endif }; #endif /* _E1000_H_ */ diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 82549a6fcfb..03e3ec74f3f 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -312,6 +312,16 @@ e1000_up(struct e1000_adapter *adapter) e1000_configure_rx(adapter); e1000_alloc_rx_buffers(adapter); +#ifdef CONFIG_PCI_MSI + if(adapter->hw.mac_type > e1000_82547_rev_2) { + adapter->have_msi = TRUE; + if((err = pci_enable_msi(adapter->pdev))) { + DPRINTK(PROBE, ERR, + "Unable to allocate MSI interrupt Error: %d\n", err); + adapter->have_msi = FALSE; + } + } +#endif if((err = request_irq(adapter->pdev->irq, &e1000_intr, SA_SHIRQ | SA_SAMPLE_RANDOM, netdev->name, netdev))) @@ -333,6 +343,11 @@ e1000_down(struct e1000_adapter *adapter) e1000_irq_disable(adapter); free_irq(adapter->pdev->irq, netdev); +#ifdef CONFIG_PCI_MSI + if(adapter->hw.mac_type > e1000_82547_rev_2 && + adapter->have_msi == TRUE) + pci_disable_msi(adapter->pdev); +#endif del_timer_sync(&adapter->tx_fifo_stall_timer); del_timer_sync(&adapter->watchdog_timer); del_timer_sync(&adapter->phy_info_timer); -- cgit v1.2.3 From 5de556249fde97493a4c79dbf8979ace0f76789f Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 28 Apr 2005 19:39:30 -0700 Subject: [PATCH] e1000: Enable polling before enabling interrupts Enable polling before enabling interrupts -- avoids (in NAPI mode) entering the ISR and returning without doing any work because polling is not enabled. [romieu@fr.zoriel.com] Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak diff -up net-drivers-2.6/drivers/net/e1000/e1000_main.c net-drivers-2.6/drivers/net/e1000.new/e1000_main.c --- drivers/net/e1000/e1000_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 03e3ec74f3f..9927106b76c 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -328,11 +328,12 @@ e1000_up(struct e1000_adapter *adapter) return err; mod_timer(&adapter->watchdog_timer, jiffies); - e1000_irq_enable(adapter); #ifdef CONFIG_E1000_NAPI netif_poll_enable(netdev); #endif + e1000_irq_enable(adapter); + return 0; } -- cgit v1.2.3 From 4e48a2b91d408357cb0747151d8db5368ac8f1d0 Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 28 Apr 2005 19:39:53 -0700 Subject: [PATCH] e1000: Fix kernel panic with 82541 LOM Fix kernel panic with 82541 LOM when using a 100M cable Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak diff -up net-drivers-2.6/drivers/net/e1000/e1000_main.c net-drivers-2.6/drivers/net/e1000.new/e1000_main.c --- drivers/net/e1000/e1000_main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 9927106b76c..9c6c1fbbc41 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -372,6 +372,7 @@ e1000_down(struct e1000_adapter *adapter) e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg); mii_reg |= MII_CR_POWER_DOWN; e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg); + mdelay(1); } } -- cgit v1.2.3 From 2701234fc0372630457e3da14e36cde53c57d12e Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 28 Apr 2005 19:40:28 -0700 Subject: [PATCH] e1000: Delay clean-up of last Tx packet Delay clean-up of last Tx packet to fix pre-mature writeback issue of Tx descriptors only when TSO is enabled Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak diff -up net-drivers-2.6/drivers/net/e1000/e1000_main.c net-drivers-2.6/drivers/net/e1000.new/e1000_main.c --- drivers/net/e1000/e1000_main.c | 43 ++++++++++++++++++++++++++---------------- 1 file changed, 27 insertions(+), 16 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 9c6c1fbbc41..4a8c069e6c7 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -2384,11 +2384,10 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter) eop_desc = E1000_TX_DESC(*tx_ring, eop); while(eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) { - /* pre-mature writeback of Tx descriptors */ - /* clear (free buffers and unmap pci_mapping) */ - /* previous_buffer_info */ + /* Premature writeback of Tx descriptors clear (free buffers + * and unmap pci_mapping) previous_buffer_info */ if (likely(adapter->previous_buffer_info.skb != NULL)) { - e1000_unmap_and_free_tx_resource(adapter, + e1000_unmap_and_free_tx_resource(adapter, &adapter->previous_buffer_info); } @@ -2397,20 +2396,25 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter) buffer_info = &tx_ring->buffer_info[i]; cleaned = (i == eop); - /* pre-mature writeback of Tx descriptors */ - /* save the cleaning of the this for the */ - /* next iteration */ - if (cleaned) { - memcpy(&adapter->previous_buffer_info, - buffer_info, - sizeof(struct e1000_buffer)); - memset(buffer_info, - 0, - sizeof(struct e1000_buffer)); +#ifdef NETIF_F_TSO + if (!(netdev->features & NETIF_F_TSO)) { +#endif + e1000_unmap_and_free_tx_resource(adapter, + buffer_info); +#ifdef NETIF_F_TSO } else { - e1000_unmap_and_free_tx_resource(adapter, - buffer_info); + if (cleaned) { + memcpy(&adapter->previous_buffer_info, + buffer_info, + sizeof(struct e1000_buffer)); + memset(buffer_info, 0, + sizeof(struct e1000_buffer)); + } else { + e1000_unmap_and_free_tx_resource( + adapter, buffer_info); + } } +#endif tx_desc->buffer_addr = 0; tx_desc->lower.data = 0; @@ -2443,7 +2447,14 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter) !(E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_TXOFF)) netif_stop_queue(netdev); } +#ifdef NETIF_F_TSO + if( unlikely(!(eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) && + time_after(jiffies, adapter->previous_buffer_info.time_stamp + HZ))) + e1000_unmap_and_free_tx_resource( + adapter, &adapter->previous_buffer_info); + +#endif return cleaned; } -- cgit v1.2.3 From 70b8f1e16a788eccdd36f39679774b1a08a6ba55 Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 28 Apr 2005 19:40:40 -0700 Subject: [PATCH] e1000: Dump information on Tx ring Dump information on Tx ring when 'NETDEV: Watchdog' condition is reached Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak diff -up net-drivers-2.6/drivers/net/e1000/e1000_main.c net-drivers-2.6/drivers/net/e1000.new/e1000_main.c --- drivers/net/e1000/e1000_main.c | 33 ++++++++++++++++++++++++++++++--- 1 file changed, 30 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 4a8c069e6c7..b5811f4f88f 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -2442,10 +2442,37 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter) /* detect a transmit hang in hardware, this serializes the * check with the clearing of time_stamp and movement of i */ adapter->detect_tx_hung = FALSE; - if(tx_ring->buffer_info[i].dma && - time_after(jiffies, tx_ring->buffer_info[i].time_stamp + HZ) && - !(E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_TXOFF)) + if (tx_ring->buffer_info[i].dma && + time_after(jiffies, tx_ring->buffer_info[i].time_stamp + HZ) + && !(E1000_READ_REG(&adapter->hw, STATUS) & + E1000_STATUS_TXOFF)) { + + /* detected Tx unit hang */ + i = tx_ring->next_to_clean; + eop = tx_ring->buffer_info[i].next_to_watch; + eop_desc = E1000_TX_DESC(*tx_ring, eop); + DPRINTK(TX_ERR, ERR, "Detected Tx Unit Hang\n" + " TDH <%x>\n" + " TDT <%x>\n" + " next_to_use <%x>\n" + " next_to_clean <%x>\n" + "buffer_info[next_to_clean]\n" + " dma <%llx>\n" + " time_stamp <%lx>\n" + " next_to_watch <%x>\n" + " jiffies <%lx>\n" + " next_to_watch.status <%x>\n", + E1000_READ_REG(&adapter->hw, TDH), + E1000_READ_REG(&adapter->hw, TDT), + tx_ring->next_to_use, + i, + tx_ring->buffer_info[i].dma, + tx_ring->buffer_info[i].time_stamp, + eop, + jiffies, + eop_desc->upper.fields.status); netif_stop_queue(netdev); + } } #ifdef NETIF_F_TSO -- cgit v1.2.3 From 6d9157577d926d2a83fe8d4914c0cc216deb5842 Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 28 Apr 2005 19:41:11 -0700 Subject: [PATCH] e1000:Fix computation of netdev stats from controller stats counters Fix computation of netdev stats from controller stats counters - from sfeldma@pobox.com Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak diff -up net-drivers-2.6/drivers/net/e1000/e1000_main.c net-drivers-2.6/drivers/net/e1000.new/e1000_main.c --- drivers/net/e1000/e1000_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index b5811f4f88f..ed1e57ac755 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -2230,9 +2230,9 @@ e1000_update_stats(struct e1000_adapter *adapter) adapter->net_stats.rx_errors = adapter->stats.rxerrc + adapter->stats.crcerrs + adapter->stats.algnerrc + - adapter->stats.rlec + adapter->stats.rnbc + - adapter->stats.mpc + adapter->stats.cexterr; - adapter->net_stats.rx_dropped = adapter->stats.rnbc; + adapter->stats.rlec + adapter->stats.mpc + + adapter->stats.cexterr; + adapter->net_stats.rx_dropped = adapter->stats.mpc; adapter->net_stats.rx_length_errors = adapter->stats.rlec; adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs; adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc; -- cgit v1.2.3 From a4cb847dac40577dd751a4deb4085ed080780679 Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 28 Apr 2005 19:41:28 -0700 Subject: [PATCH] e1000: e1000 stops working after resume e1000 stops working after resume, call pci_enable_device after pci_restore_state - Modified Andrew Morton's patch Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak diff -up net-drivers-2.6/drivers/net/e1000/e1000_main.c net-drivers-2.6/drivers/net/e1000.new/e1000_main.c --- drivers/net/e1000/e1000_main.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index ed1e57ac755..479915a9f0f 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -3173,8 +3173,7 @@ e1000_resume(struct pci_dev *pdev) pci_set_power_state(pdev, 0); pci_restore_state(pdev); ret = pci_enable_device(pdev); - if (pdev->is_busmaster) - pci_set_master(pdev); + pci_set_master(pdev); pci_enable_wake(pdev, 3, 0); pci_enable_wake(pdev, 4, 0); /* 4 == D3 cold */ -- cgit v1.2.3 From 97338bde27d97347bc83203d6ac5e93be1ebcd03 Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 28 Apr 2005 19:41:46 -0700 Subject: [PATCH] e1000: Implement a workaround for 82546 errata 10 Implement 82546 errata 10 -- first Tx descriptor cannot have more than 2015 byte of data in it or it could hang the transmitter. Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak diff -up net-drivers-2.6/drivers/net/e1000/e1000_main.c net-drivers-2.6/drivers/net/e1000.new/e1000_main.c --- drivers/net/e1000/e1000_main.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 479915a9f0f..e54890aff5f 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -1777,6 +1777,15 @@ e1000_tx_map(struct e1000_adapter *adapter, struct sk_buff *skb, if(unlikely(mss && !nr_frags && size == len && size > 8)) size -= 4; #endif + /* work-around for errata 10 and it applies + * to all controllers in PCI-X mode + * The fix is to make sure that the first descriptor of a + * packet is smaller than 2048 - 16 - 16 (or 2016) bytes + */ + if(unlikely((adapter->hw.bus_type == e1000_bus_type_pcix) && + (size > 2015) && count == 0)) + size = 2015; + /* Workaround for potential 82544 hang in PCI-X. Avoid * terminating buffers within evenly-aligned dwords. */ if(unlikely(adapter->pcix_82544 && @@ -1979,6 +1988,13 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) if(adapter->pcix_82544) count++; + /* work-around for errata 10 and it applies to all controllers + * in PCI-X mode, so add one more descriptor to the count + */ + if(unlikely((adapter->hw.bus_type == e1000_bus_type_pcix) && + (len > 2015))) + count++; + nr_frags = skb_shinfo(skb)->nr_frags; for(f = 0; f < nr_frags; f++) count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size, -- cgit v1.2.3 From f1d2e4905eed4b13c3ba56ac6d30c283be996963 Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 28 Apr 2005 19:42:04 -0700 Subject: [PATCH] e1000:Removed redundant statement in e1000_clean_tx_irq Removed redundant statement in e1000_clean_tx_irq Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak diff -up net-drivers-2.6/drivers/net/e1000/e1000_main.c net-drivers-2.6/drivers/net/e1000.new/e1000_main.c --- drivers/net/e1000/e1000_main.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index e54890aff5f..0fec670e51e 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -2436,7 +2436,6 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter) tx_desc->lower.data = 0; tx_desc->upper.data = 0; - cleaned = (i == eop); if(unlikely(++i == tx_ring->count)) i = 0; } -- cgit v1.2.3 From f0d11ed0b0650d2f93f56f65167c10a577c16c88 Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 28 Apr 2005 19:43:28 -0700 Subject: [PATCH] e1000: Modified e1000_clean: exit poll Modified e1000_clean:: exit poll if no Tx and work_done == 0 Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak diff -up net-drivers-2.6/drivers/net/e1000/e1000_main.c net-drivers-2.6/drivers/net/e1000.new/e1000_main.c --- drivers/net/e1000/e1000_main.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 0fec670e51e..4cdf371961e 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -2368,9 +2368,8 @@ e1000_clean(struct net_device *netdev, int *budget) *budget -= work_done; netdev->quota -= work_done; - /* if no Tx and not enough Rx work done, exit the polling mode */ - if((!tx_cleaned && (work_done < work_to_do)) || - !netif_running(netdev)) { + /* If no Tx and no Rx work done, exit the polling mode */ + if ((!tx_cleaned && (work_done == 0)) || !netif_running(netdev)) { netif_rx_complete(netdev); e1000_irq_enable(adapter); return 0; -- cgit v1.2.3 From 2d7edb923a823660b081bd4c660300ee19adca8d Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 28 Apr 2005 19:43:52 -0700 Subject: [PATCH] e1000:82573 specific code & packet split code 82573 specific code & packet split code Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak diff -up net-drivers-2.6/drivers/net/e1000/e1000.h net-drivers-2.6/drivers/net/e1000.new/e1000.h --- drivers/net/e1000/e1000.h | 26 + drivers/net/e1000/e1000_hw.c | 2132 ++++++++++++++++++++++++++++++--------- drivers/net/e1000/e1000_hw.h | 568 ++++++++++- drivers/net/e1000/e1000_main.c | 804 ++++++++++++--- drivers/net/e1000/e1000_osdep.h | 23 + 5 files changed, 2956 insertions(+), 597 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h index da055520daa..19858c26753 100644 --- a/drivers/net/e1000/e1000.h +++ b/drivers/net/e1000/e1000.h @@ -112,6 +112,8 @@ struct e1000_adapter; #define E1000_MAX_82544_RXD 4096 /* Supported Rx Buffer Sizes */ +#define E1000_RXBUFFER_128 128 /* Used for packet split */ +#define E1000_RXBUFFER_256 256 /* Used for packet split */ #define E1000_RXBUFFER_2048 2048 #define E1000_RXBUFFER_4096 4096 #define E1000_RXBUFFER_8192 8192 @@ -146,6 +148,10 @@ struct e1000_adapter; #define E1000_MASTER_SLAVE e1000_ms_hw_default #endif +#define E1000_MNG_VLAN_NONE -1 +/* Number of packet split data buffers (not including the header buffer) */ +#define PS_PAGE_BUFFERS MAX_PS_BUFFERS-1 + /* only works for sizes that are powers of 2 */ #define E1000_ROUNDUP(i, size) ((i) = (((i) + (size) - 1) & ~((size) - 1))) @@ -159,6 +165,9 @@ struct e1000_buffer { uint16_t next_to_watch; }; +struct e1000_ps_page { struct page *ps_page[MAX_PS_BUFFERS]; }; +struct e1000_ps_page_dma { uint64_t ps_page_dma[MAX_PS_BUFFERS]; }; + struct e1000_desc_ring { /* pointer to the descriptor ring memory */ void *desc; @@ -174,12 +183,19 @@ struct e1000_desc_ring { unsigned int next_to_clean; /* array of buffer information structs */ struct e1000_buffer *buffer_info; + /* arrays of page information for packet split */ + struct e1000_ps_page *ps_page; + struct e1000_ps_page_dma *ps_page_dma; }; #define E1000_DESC_UNUSED(R) \ ((((R)->next_to_clean > (R)->next_to_use) ? 0 : (R)->count) + \ (R)->next_to_clean - (R)->next_to_use - 1) +#define E1000_RX_DESC_PS(R, i) \ + (&(((union e1000_rx_desc_packet_split *)((R).desc))[i])) +#define E1000_RX_DESC_EXT(R, i) \ + (&(((union e1000_rx_desc_extended *)((R).desc))[i])) #define E1000_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i])) #define E1000_RX_DESC(R, i) E1000_GET_DESC(R, i, e1000_rx_desc) #define E1000_TX_DESC(R, i) E1000_GET_DESC(R, i, e1000_tx_desc) @@ -192,6 +208,7 @@ struct e1000_adapter { struct timer_list watchdog_timer; struct timer_list phy_info_timer; struct vlan_group *vlgrp; + uint16_t mng_vlan_id; uint32_t bd_number; uint32_t rx_buffer_len; uint32_t part_num; @@ -228,14 +245,23 @@ struct e1000_adapter { boolean_t detect_tx_hung; /* RX */ +#ifdef CONFIG_E1000_NAPI + boolean_t (*clean_rx) (struct e1000_adapter *adapter, int *work_done, + int work_to_do); +#else + boolean_t (*clean_rx) (struct e1000_adapter *adapter); +#endif + void (*alloc_rx_buf) (struct e1000_adapter *adapter); struct e1000_desc_ring rx_ring; uint64_t hw_csum_err; uint64_t hw_csum_good; uint32_t rx_int_delay; uint32_t rx_abs_int_delay; boolean_t rx_csum; + boolean_t rx_ps; uint32_t gorcl; uint64_t gorcl_old; + uint16_t rx_ps_bsize0; /* Interrupt Throttle Rate */ uint32_t itr; diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 786a9b93565..b7a7ceb67f4 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -63,10 +63,11 @@ static uint16_t e1000_shift_in_ee_bits(struct e1000_hw *hw, uint16_t count); static int32_t e1000_acquire_eeprom(struct e1000_hw *hw); static void e1000_release_eeprom(struct e1000_hw *hw); static void e1000_standby_eeprom(struct e1000_hw *hw); -static int32_t e1000_id_led_init(struct e1000_hw * hw); static int32_t e1000_set_vco_speed(struct e1000_hw *hw); static int32_t e1000_polarity_reversal_workaround(struct e1000_hw *hw); static int32_t e1000_set_phy_mode(struct e1000_hw *hw); +static int32_t e1000_host_if_read_cookie(struct e1000_hw *hw, uint8_t *buffer); +static uint8_t e1000_calculate_mng_checksum(char *buffer, uint32_t length); /* IGP cable length table */ static const @@ -80,6 +81,17 @@ uint16_t e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] = 100, 100, 100, 100, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 120, 120, 120, 120, 120, 120, 120, 120, 120, 120}; +static const +uint16_t e1000_igp_2_cable_length_table[IGP02E1000_AGC_LENGTH_TABLE_SIZE] = + { 8, 13, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, 37, 39, 41, 43, + 22, 24, 27, 30, 32, 35, 37, 40, 42, 44, 47, 49, 51, 54, 56, 58, + 32, 35, 38, 41, 44, 47, 50, 53, 55, 58, 61, 63, 66, 69, 71, 74, + 43, 47, 51, 54, 58, 61, 64, 67, 71, 74, 77, 80, 82, 85, 88, 90, + 57, 62, 66, 70, 74, 77, 81, 85, 88, 91, 94, 97, 100, 103, 106, 108, + 73, 78, 82, 87, 91, 95, 98, 102, 105, 109, 112, 114, 117, 119, 122, 124, + 91, 96, 101, 105, 109, 113, 116, 119, 122, 125, 127, 128, 128, 128, 128, 128, + 108, 113, 117, 121, 124, 127, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128}; + /****************************************************************************** * Set the phy type member in the hw struct. @@ -91,10 +103,14 @@ e1000_set_phy_type(struct e1000_hw *hw) { DEBUGFUNC("e1000_set_phy_type"); + if(hw->mac_type == e1000_undefined) + return -E1000_ERR_PHY_TYPE; + switch(hw->phy_id) { case M88E1000_E_PHY_ID: case M88E1000_I_PHY_ID: case M88E1011_I_PHY_ID: + case M88E1111_I_PHY_ID: hw->phy_type = e1000_phy_m88; break; case IGP01E1000_I_PHY_ID: @@ -271,6 +287,7 @@ e1000_set_mac_type(struct e1000_hw *hw) case E1000_DEV_ID_82546GB_FIBER: case E1000_DEV_ID_82546GB_SERDES: case E1000_DEV_ID_82546GB_PCIE: + case E1000_DEV_ID_82546GB_QUAD_COPPER: hw->mac_type = e1000_82546_rev_3; break; case E1000_DEV_ID_82541EI: @@ -289,12 +306,19 @@ e1000_set_mac_type(struct e1000_hw *hw) case E1000_DEV_ID_82547GI: hw->mac_type = e1000_82547_rev_2; break; + case E1000_DEV_ID_82573E: + case E1000_DEV_ID_82573E_IAMT: + hw->mac_type = e1000_82573; + break; default: /* Should never have loaded on this device */ return -E1000_ERR_MAC_TYPE; } switch(hw->mac_type) { + case e1000_82573: + hw->eeprom_semaphore_present = TRUE; + /* fall through */ case e1000_82541: case e1000_82547: case e1000_82541_rev_2: @@ -360,6 +384,9 @@ e1000_reset_hw(struct e1000_hw *hw) uint32_t icr; uint32_t manc; uint32_t led_ctrl; + uint32_t timeout; + uint32_t extcnf_ctrl; + int32_t ret_val; DEBUGFUNC("e1000_reset_hw"); @@ -369,6 +396,15 @@ e1000_reset_hw(struct e1000_hw *hw) e1000_pci_clear_mwi(hw); } + if(hw->bus_type == e1000_bus_type_pci_express) { + /* Prevent the PCI-E bus from sticking if there is no TLP connection + * on the last TLP read/write transaction when MAC is reset. + */ + if(e1000_disable_pciex_master(hw) != E1000_SUCCESS) { + DEBUGOUT("PCI-E Master disable polling has failed.\n"); + } + } + /* Clear interrupt mask to stop board from generating interrupts */ DEBUGOUT("Masking off all interrupts\n"); E1000_WRITE_REG(hw, IMC, 0xffffffff); @@ -393,10 +429,32 @@ e1000_reset_hw(struct e1000_hw *hw) /* Must reset the PHY before resetting the MAC */ if((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { - E1000_WRITE_REG_IO(hw, CTRL, (ctrl | E1000_CTRL_PHY_RST)); + E1000_WRITE_REG(hw, CTRL, (ctrl | E1000_CTRL_PHY_RST)); msec_delay(5); } + /* Must acquire the MDIO ownership before MAC reset. + * Ownership defaults to firmware after a reset. */ + if(hw->mac_type == e1000_82573) { + timeout = 10; + + extcnf_ctrl = E1000_READ_REG(hw, EXTCNF_CTRL); + extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; + + do { + E1000_WRITE_REG(hw, EXTCNF_CTRL, extcnf_ctrl); + extcnf_ctrl = E1000_READ_REG(hw, EXTCNF_CTRL); + + if(extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP) + break; + else + extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; + + msec_delay(2); + timeout--; + } while(timeout); + } + /* Issue a global reset to the MAC. This will reset the chip's * transmit, receive, DMA, and link units. It will not effect * the current PCI configuration. The global reset bit is self- @@ -450,6 +508,18 @@ e1000_reset_hw(struct e1000_hw *hw) /* Wait for EEPROM reload */ msec_delay(20); break; + case e1000_82573: + udelay(10); + ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); + ctrl_ext |= E1000_CTRL_EXT_EE_RST; + E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); + E1000_WRITE_FLUSH(hw); + /* fall through */ + ret_val = e1000_get_auto_rd_done(hw); + if(ret_val) + /* We don't want to continue accessing MAC registers. */ + return ret_val; + break; default: /* Wait for EEPROM reload (it happens automatically) */ msec_delay(5); @@ -457,7 +527,7 @@ e1000_reset_hw(struct e1000_hw *hw) } /* Disable HW ARPs on ASF enabled adapters */ - if(hw->mac_type >= e1000_82540) { + if(hw->mac_type >= e1000_82540 && hw->mac_type <= e1000_82547_rev_2) { manc = E1000_READ_REG(hw, MANC); manc &= ~(E1000_MANC_ARP_EN); E1000_WRITE_REG(hw, MANC, manc); @@ -510,6 +580,8 @@ e1000_init_hw(struct e1000_hw *hw) uint16_t pcix_stat_hi_word; uint16_t cmd_mmrbc; uint16_t stat_mmrbc; + uint32_t mta_size; + DEBUGFUNC("e1000_init_hw"); /* Initialize Identification LED */ @@ -524,8 +596,8 @@ e1000_init_hw(struct e1000_hw *hw) /* Disabling VLAN filtering. */ DEBUGOUT("Initializing the IEEE VLAN\n"); - E1000_WRITE_REG(hw, VET, 0); - + if (hw->mac_type < e1000_82545_rev_3) + E1000_WRITE_REG(hw, VET, 0); e1000_clear_vfta(hw); /* For 82542 (rev 2.0), disable MWI and put the receiver into reset */ @@ -553,14 +625,16 @@ e1000_init_hw(struct e1000_hw *hw) /* Zero out the Multicast HASH table */ DEBUGOUT("Zeroing the MTA\n"); - for(i = 0; i < E1000_MC_TBL_SIZE; i++) + mta_size = E1000_MC_TBL_SIZE; + for(i = 0; i < mta_size; i++) E1000_WRITE_REG_ARRAY(hw, MTA, i, 0); /* Set the PCI priority bit correctly in the CTRL register. This * determines if the adapter gives priority to receives, or if it - * gives equal priority to transmits and receives. + * gives equal priority to transmits and receives. Valid only on + * 82542 and 82543 silicon. */ - if(hw->dma_fairness) { + if(hw->dma_fairness && hw->mac_type <= e1000_82543) { ctrl = E1000_READ_REG(hw, CTRL); E1000_WRITE_REG(hw, CTRL, ctrl | E1000_CTRL_PRIOR); } @@ -598,9 +672,21 @@ e1000_init_hw(struct e1000_hw *hw) if(hw->mac_type > e1000_82544) { ctrl = E1000_READ_REG(hw, TXDCTL); ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB; + switch (hw->mac_type) { + default: + break; + case e1000_82573: + ctrl |= E1000_TXDCTL_COUNT_DESC; + break; + } E1000_WRITE_REG(hw, TXDCTL, ctrl); } + if (hw->mac_type == e1000_82573) { + e1000_enable_tx_pkt_filtering(hw); + } + + /* Clear all of the statistics registers (clear on read). It is * important that we do this after we have tried to establish link * because the symbol error count will increment wildly if there @@ -679,7 +765,7 @@ e1000_setup_link(struct e1000_hw *hw) * control setting, then the variable hw->fc will * be initialized based on a value in the EEPROM. */ - if(e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data) < 0) { + if(e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data)) { DEBUGOUT("EEPROM Read Error\n"); return -E1000_ERR_EEPROM; } @@ -736,6 +822,7 @@ e1000_setup_link(struct e1000_hw *hw) E1000_WRITE_REG(hw, FCAL, FLOW_CONTROL_ADDRESS_LOW); E1000_WRITE_REG(hw, FCAH, FLOW_CONTROL_ADDRESS_HIGH); E1000_WRITE_REG(hw, FCT, FLOW_CONTROL_TYPE); + E1000_WRITE_REG(hw, FCTTV, hw->fc_pause_time); /* Set the flow control receive threshold registers. Normally, @@ -906,20 +993,18 @@ e1000_setup_fiber_serdes_link(struct e1000_hw *hw) } /****************************************************************************** -* Detects which PHY is present and the speed and duplex +* Make sure we have a valid PHY and change PHY mode before link setup. * * hw - Struct containing variables accessed by shared code ******************************************************************************/ static int32_t -e1000_setup_copper_link(struct e1000_hw *hw) +e1000_copper_link_preconfig(struct e1000_hw *hw) { uint32_t ctrl; - uint32_t led_ctrl; int32_t ret_val; - uint16_t i; uint16_t phy_data; - DEBUGFUNC("e1000_setup_copper_link"); + DEBUGFUNC("e1000_copper_link_preconfig"); ctrl = E1000_READ_REG(hw, CTRL); /* With 82543, we need to force speed and duplex on the MAC equal to what @@ -933,7 +1018,9 @@ e1000_setup_copper_link(struct e1000_hw *hw) } else { ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX | E1000_CTRL_SLU); E1000_WRITE_REG(hw, CTRL, ctrl); - e1000_phy_hw_reset(hw); + ret_val = e1000_phy_hw_reset(hw); + if(ret_val) + return ret_val; } /* Make sure we have a valid PHY */ @@ -961,354 +1048,452 @@ e1000_setup_copper_link(struct e1000_hw *hw) hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) hw->phy_reset_disable = FALSE; - if(!hw->phy_reset_disable) { - if (hw->phy_type == e1000_phy_igp) { - - ret_val = e1000_phy_reset(hw); - if(ret_val) { - DEBUGOUT("Error Resetting the PHY\n"); - return ret_val; - } - - /* Wait 10ms for MAC to configure PHY from eeprom settings */ - msec_delay(15); + return E1000_SUCCESS; +} - /* Configure activity LED after PHY reset */ - led_ctrl = E1000_READ_REG(hw, LEDCTL); - led_ctrl &= IGP_ACTIVITY_LED_MASK; - led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE); - E1000_WRITE_REG(hw, LEDCTL, led_ctrl); - /* disable lplu d3 during driver init */ - ret_val = e1000_set_d3_lplu_state(hw, FALSE); - if(ret_val) { - DEBUGOUT("Error Disabling LPLU D3\n"); - return ret_val; - } +/******************************************************************** +* Copper link setup for e1000_phy_igp series. +* +* hw - Struct containing variables accessed by shared code +*********************************************************************/ +static int32_t +e1000_copper_link_igp_setup(struct e1000_hw *hw) +{ + uint32_t led_ctrl; + int32_t ret_val; + uint16_t phy_data; - /* Configure mdi-mdix settings */ - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, - &phy_data); - if(ret_val) - return ret_val; + DEBUGFUNC("e1000_copper_link_igp_setup"); - if((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { - hw->dsp_config_state = e1000_dsp_config_disabled; - /* Force MDI for earlier revs of the IGP PHY */ - phy_data &= ~(IGP01E1000_PSCR_AUTO_MDIX | - IGP01E1000_PSCR_FORCE_MDI_MDIX); - hw->mdix = 1; + if (hw->phy_reset_disable) + return E1000_SUCCESS; + + ret_val = e1000_phy_reset(hw); + if (ret_val) { + DEBUGOUT("Error Resetting the PHY\n"); + return ret_val; + } - } else { - hw->dsp_config_state = e1000_dsp_config_enabled; - phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX; - - switch (hw->mdix) { - case 1: - phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX; - break; - case 2: - phy_data |= IGP01E1000_PSCR_FORCE_MDI_MDIX; - break; - case 0: - default: - phy_data |= IGP01E1000_PSCR_AUTO_MDIX; - break; - } - } - ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, - phy_data); - if(ret_val) - return ret_val; + /* Wait 10ms for MAC to configure PHY from eeprom settings */ + msec_delay(15); - /* set auto-master slave resolution settings */ - if(hw->autoneg) { - e1000_ms_type phy_ms_setting = hw->master_slave; + /* Configure activity LED after PHY reset */ + led_ctrl = E1000_READ_REG(hw, LEDCTL); + led_ctrl &= IGP_ACTIVITY_LED_MASK; + led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE); + E1000_WRITE_REG(hw, LEDCTL, led_ctrl); - if(hw->ffe_config_state == e1000_ffe_config_active) - hw->ffe_config_state = e1000_ffe_config_enabled; + /* disable lplu d3 during driver init */ + ret_val = e1000_set_d3_lplu_state(hw, FALSE); + if (ret_val) { + DEBUGOUT("Error Disabling LPLU D3\n"); + return ret_val; + } - if(hw->dsp_config_state == e1000_dsp_config_activated) - hw->dsp_config_state = e1000_dsp_config_enabled; + /* disable lplu d0 during driver init */ + ret_val = e1000_set_d0_lplu_state(hw, FALSE); + if (ret_val) { + DEBUGOUT("Error Disabling LPLU D0\n"); + return ret_val; + } + /* Configure mdi-mdix settings */ + ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data); + if (ret_val) + return ret_val; - /* when autonegotiation advertisment is only 1000Mbps then we - * should disable SmartSpeed and enable Auto MasterSlave - * resolution as hardware default. */ - if(hw->autoneg_advertised == ADVERTISE_1000_FULL) { - /* Disable SmartSpeed */ - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - &phy_data); - if(ret_val) - return ret_val; - phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val = e1000_write_phy_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - phy_data); - if(ret_val) - return ret_val; - /* Set auto Master/Slave resolution process */ - ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data); - if(ret_val) - return ret_val; - phy_data &= ~CR_1000T_MS_ENABLE; - ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data); - if(ret_val) - return ret_val; - } + if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { + hw->dsp_config_state = e1000_dsp_config_disabled; + /* Force MDI for earlier revs of the IGP PHY */ + phy_data &= ~(IGP01E1000_PSCR_AUTO_MDIX | IGP01E1000_PSCR_FORCE_MDI_MDIX); + hw->mdix = 1; - ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data); - if(ret_val) - return ret_val; + } else { + hw->dsp_config_state = e1000_dsp_config_enabled; + phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX; - /* load defaults for future use */ - hw->original_master_slave = (phy_data & CR_1000T_MS_ENABLE) ? - ((phy_data & CR_1000T_MS_VALUE) ? - e1000_ms_force_master : - e1000_ms_force_slave) : - e1000_ms_auto; - - switch (phy_ms_setting) { - case e1000_ms_force_master: - phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE); - break; - case e1000_ms_force_slave: - phy_data |= CR_1000T_MS_ENABLE; - phy_data &= ~(CR_1000T_MS_VALUE); - break; - case e1000_ms_auto: - phy_data &= ~CR_1000T_MS_ENABLE; - default: - break; - } - ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data); - if(ret_val) - return ret_val; - } - } else { - /* Enable CRS on TX. This must be set for half-duplex operation. */ - ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, - &phy_data); - if(ret_val) - return ret_val; + switch (hw->mdix) { + case 1: + phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX; + break; + case 2: + phy_data |= IGP01E1000_PSCR_FORCE_MDI_MDIX; + break; + case 0: + default: + phy_data |= IGP01E1000_PSCR_AUTO_MDIX; + break; + } + } + ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data); + if(ret_val) + return ret_val; - phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; + /* set auto-master slave resolution settings */ + if(hw->autoneg) { + e1000_ms_type phy_ms_setting = hw->master_slave; - /* Options: - * MDI/MDI-X = 0 (default) - * 0 - Auto for all speeds - * 1 - MDI mode - * 2 - MDI-X mode - * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes) - */ - phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; + if(hw->ffe_config_state == e1000_ffe_config_active) + hw->ffe_config_state = e1000_ffe_config_enabled; - switch (hw->mdix) { - case 1: - phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE; - break; - case 2: - phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE; - break; - case 3: - phy_data |= M88E1000_PSCR_AUTO_X_1000T; - break; - case 0: - default: - phy_data |= M88E1000_PSCR_AUTO_X_MODE; - break; - } + if(hw->dsp_config_state == e1000_dsp_config_activated) + hw->dsp_config_state = e1000_dsp_config_enabled; - /* Options: - * disable_polarity_correction = 0 (default) - * Automatic Correction for Reversed Cable Polarity - * 0 - Disabled - * 1 - Enabled - */ - phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL; - if(hw->disable_polarity_correction == 1) - phy_data |= M88E1000_PSCR_POLARITY_REVERSAL; - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, - phy_data); + /* when autonegotiation advertisment is only 1000Mbps then we + * should disable SmartSpeed and enable Auto MasterSlave + * resolution as hardware default. */ + if(hw->autoneg_advertised == ADVERTISE_1000_FULL) { + /* Disable SmartSpeed */ + ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data); if(ret_val) return ret_val; - - /* Force TX_CLK in the Extended PHY Specific Control Register - * to 25MHz clock. - */ - ret_val = e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, - &phy_data); + phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = e1000_write_phy_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + phy_data); if(ret_val) return ret_val; + /* Set auto Master/Slave resolution process */ + ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data); + if(ret_val) + return ret_val; + phy_data &= ~CR_1000T_MS_ENABLE; + ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data); + if(ret_val) + return ret_val; + } - phy_data |= M88E1000_EPSCR_TX_CLK_25; + ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data); + if(ret_val) + return ret_val; - if (hw->phy_revision < M88E1011_I_REV_4) { - /* Configure Master and Slave downshift values */ - phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK | - M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK); - phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X | - M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X); - ret_val = e1000_write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, - phy_data); - if(ret_val) - return ret_val; - } + /* load defaults for future use */ + hw->original_master_slave = (phy_data & CR_1000T_MS_ENABLE) ? + ((phy_data & CR_1000T_MS_VALUE) ? + e1000_ms_force_master : + e1000_ms_force_slave) : + e1000_ms_auto; - /* SW Reset the PHY so all changes take effect */ - ret_val = e1000_phy_reset(hw); - if(ret_val) { - DEBUGOUT("Error Resetting the PHY\n"); - return ret_val; - } + switch (phy_ms_setting) { + case e1000_ms_force_master: + phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE); + break; + case e1000_ms_force_slave: + phy_data |= CR_1000T_MS_ENABLE; + phy_data &= ~(CR_1000T_MS_VALUE); + break; + case e1000_ms_auto: + phy_data &= ~CR_1000T_MS_ENABLE; + default: + break; + } + ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data); + if(ret_val) + return ret_val; } - /* Options: - * autoneg = 1 (default) - * PHY will advertise value(s) parsed from - * autoneg_advertised and fc - * autoneg = 0 - * PHY will be set to 10H, 10F, 100H, or 100F - * depending on value parsed from forced_speed_duplex. - */ + return E1000_SUCCESS; +} - /* Is autoneg enabled? This is enabled by default or by software - * override. If so, call e1000_phy_setup_autoneg routine to parse the - * autoneg_advertised and fc options. If autoneg is NOT enabled, then - * the user should have provided a speed/duplex override. If so, then - * call e1000_phy_force_speed_duplex to parse and set this up. - */ - if(hw->autoneg) { - /* Perform some bounds checking on the hw->autoneg_advertised - * parameter. If this variable is zero, then set it to the default. - */ - hw->autoneg_advertised &= AUTONEG_ADVERTISE_SPEED_DEFAULT; - /* If autoneg_advertised is zero, we assume it was not defaulted - * by the calling code so we set to advertise full capability. - */ - if(hw->autoneg_advertised == 0) - hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT; +/******************************************************************** +* Copper link setup for e1000_phy_m88 series. +* +* hw - Struct containing variables accessed by shared code +*********************************************************************/ +static int32_t +e1000_copper_link_mgp_setup(struct e1000_hw *hw) +{ + int32_t ret_val; + uint16_t phy_data; - DEBUGOUT("Reconfiguring auto-neg advertisement params\n"); - ret_val = e1000_phy_setup_autoneg(hw); - if(ret_val) { - DEBUGOUT("Error Setting up Auto-Negotiation\n"); - return ret_val; - } - DEBUGOUT("Restarting Auto-Neg\n"); + DEBUGFUNC("e1000_copper_link_mgp_setup"); - /* Restart auto-negotiation by setting the Auto Neg Enable bit and - * the Auto Neg Restart bit in the PHY control register. - */ - ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data); - if(ret_val) - return ret_val; + if(hw->phy_reset_disable) + return E1000_SUCCESS; + + /* Enable CRS on TX. This must be set for half-duplex operation. */ + ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); + if(ret_val) + return ret_val; - phy_data |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG); - ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data); - if(ret_val) - return ret_val; + phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; - /* Does the user want to wait for Auto-Neg to complete here, or - * check at a later time (for example, callback routine). - */ - if(hw->wait_autoneg_complete) { - ret_val = e1000_wait_autoneg(hw); - if(ret_val) { - DEBUGOUT("Error while waiting for autoneg to complete\n"); - return ret_val; - } - } - hw->get_link_status = TRUE; - } else { - DEBUGOUT("Forcing speed and duplex\n"); - ret_val = e1000_phy_force_speed_duplex(hw); - if(ret_val) { - DEBUGOUT("Error Forcing Speed and Duplex\n"); - return ret_val; - } - } - } /* !hw->phy_reset_disable */ + /* Options: + * MDI/MDI-X = 0 (default) + * 0 - Auto for all speeds + * 1 - MDI mode + * 2 - MDI-X mode + * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes) + */ + phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; - /* Check link status. Wait up to 100 microseconds for link to become - * valid. + switch (hw->mdix) { + case 1: + phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE; + break; + case 2: + phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE; + break; + case 3: + phy_data |= M88E1000_PSCR_AUTO_X_1000T; + break; + case 0: + default: + phy_data |= M88E1000_PSCR_AUTO_X_MODE; + break; + } + + /* Options: + * disable_polarity_correction = 0 (default) + * Automatic Correction for Reversed Cable Polarity + * 0 - Disabled + * 1 - Enabled */ - for(i = 0; i < 10; i++) { - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); + phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL; + if(hw->disable_polarity_correction == 1) + phy_data |= M88E1000_PSCR_POLARITY_REVERSAL; + ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); if(ret_val) return ret_val; - ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); + + /* Force TX_CLK in the Extended PHY Specific Control Register + * to 25MHz clock. + */ + ret_val = e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data); + if(ret_val) + return ret_val; + + phy_data |= M88E1000_EPSCR_TX_CLK_25; + + if (hw->phy_revision < M88E1011_I_REV_4) { + /* Configure Master and Slave downshift values */ + phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK | + M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK); + phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X | + M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X); + ret_val = e1000_write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data); if(ret_val) return ret_val; + } - if(phy_data & MII_SR_LINK_STATUS) { - /* We have link, so we need to finish the config process: - * 1) Set up the MAC to the current PHY speed/duplex - * if we are on 82543. If we - * are on newer silicon, we only need to configure - * collision distance in the Transmit Control Register. - * 2) Set up flow control on the MAC to that established with - * the link partner. - */ - if(hw->mac_type >= e1000_82544) { - e1000_config_collision_dist(hw); - } else { - ret_val = e1000_config_mac_to_phy(hw); - if(ret_val) { - DEBUGOUT("Error configuring MAC to PHY settings\n"); - return ret_val; - } - } - ret_val = e1000_config_fc_after_link_up(hw); - if(ret_val) { - DEBUGOUT("Error Configuring Flow Control\n"); - return ret_val; - } - DEBUGOUT("Valid link established!!!\n"); - - if(hw->phy_type == e1000_phy_igp) { - ret_val = e1000_config_dsp_after_link_change(hw, TRUE); - if(ret_val) { - DEBUGOUT("Error Configuring DSP after link up\n"); - return ret_val; - } - } - DEBUGOUT("Valid link established!!!\n"); - return E1000_SUCCESS; - } - udelay(10); + /* SW Reset the PHY so all changes take effect */ + ret_val = e1000_phy_reset(hw); + if(ret_val) { + DEBUGOUT("Error Resetting the PHY\n"); + return ret_val; } - DEBUGOUT("Unable to establish link!!!\n"); - return E1000_SUCCESS; + return E1000_SUCCESS; } -/****************************************************************************** -* Configures PHY autoneg and flow control advertisement settings +/******************************************************************** +* Setup auto-negotiation and flow control advertisements, +* and then perform auto-negotiation. * * hw - Struct containing variables accessed by shared code -******************************************************************************/ -int32_t -e1000_phy_setup_autoneg(struct e1000_hw *hw) +*********************************************************************/ +static int32_t +e1000_copper_link_autoneg(struct e1000_hw *hw) { int32_t ret_val; - uint16_t mii_autoneg_adv_reg; - uint16_t mii_1000t_ctrl_reg; + uint16_t phy_data; - DEBUGFUNC("e1000_phy_setup_autoneg"); + DEBUGFUNC("e1000_copper_link_autoneg"); - /* Read the MII Auto-Neg Advertisement Register (Address 4). */ - ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg); + /* Perform some bounds checking on the hw->autoneg_advertised + * parameter. If this variable is zero, then set it to the default. + */ + hw->autoneg_advertised &= AUTONEG_ADVERTISE_SPEED_DEFAULT; + + /* If autoneg_advertised is zero, we assume it was not defaulted + * by the calling code so we set to advertise full capability. + */ + if(hw->autoneg_advertised == 0) + hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT; + + DEBUGOUT("Reconfiguring auto-neg advertisement params\n"); + ret_val = e1000_phy_setup_autoneg(hw); + if(ret_val) { + DEBUGOUT("Error Setting up Auto-Negotiation\n"); + return ret_val; + } + DEBUGOUT("Restarting Auto-Neg\n"); + + /* Restart auto-negotiation by setting the Auto Neg Enable bit and + * the Auto Neg Restart bit in the PHY control register. + */ + ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data); if(ret_val) return ret_val; - /* Read the MII 1000Base-T Control Register (Address 9). */ - ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg); + phy_data |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG); + ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data); if(ret_val) return ret_val; - /* Need to parse both autoneg_advertised and fc and set up - * the appropriate PHY registers. First we will parse for + /* Does the user want to wait for Auto-Neg to complete here, or + * check at a later time (for example, callback routine). + */ + if(hw->wait_autoneg_complete) { + ret_val = e1000_wait_autoneg(hw); + if(ret_val) { + DEBUGOUT("Error while waiting for autoneg to complete\n"); + return ret_val; + } + } + + hw->get_link_status = TRUE; + + return E1000_SUCCESS; +} + + +/****************************************************************************** +* Config the MAC and the PHY after link is up. +* 1) Set up the MAC to the current PHY speed/duplex +* if we are on 82543. If we +* are on newer silicon, we only need to configure +* collision distance in the Transmit Control Register. +* 2) Set up flow control on the MAC to that established with +* the link partner. +* 3) Config DSP to improve Gigabit link quality for some PHY revisions. +* +* hw - Struct containing variables accessed by shared code +******************************************************************************/ +static int32_t +e1000_copper_link_postconfig(struct e1000_hw *hw) +{ + int32_t ret_val; + DEBUGFUNC("e1000_copper_link_postconfig"); + + if(hw->mac_type >= e1000_82544) { + e1000_config_collision_dist(hw); + } else { + ret_val = e1000_config_mac_to_phy(hw); + if(ret_val) { + DEBUGOUT("Error configuring MAC to PHY settings\n"); + return ret_val; + } + } + ret_val = e1000_config_fc_after_link_up(hw); + if(ret_val) { + DEBUGOUT("Error Configuring Flow Control\n"); + return ret_val; + } + + /* Config DSP to improve Giga link quality */ + if(hw->phy_type == e1000_phy_igp) { + ret_val = e1000_config_dsp_after_link_change(hw, TRUE); + if(ret_val) { + DEBUGOUT("Error Configuring DSP after link up\n"); + return ret_val; + } + } + + return E1000_SUCCESS; +} + +/****************************************************************************** +* Detects which PHY is present and setup the speed and duplex +* +* hw - Struct containing variables accessed by shared code +******************************************************************************/ +static int32_t +e1000_setup_copper_link(struct e1000_hw *hw) +{ + int32_t ret_val; + uint16_t i; + uint16_t phy_data; + + DEBUGFUNC("e1000_setup_copper_link"); + + /* Check if it is a valid PHY and set PHY mode if necessary. */ + ret_val = e1000_copper_link_preconfig(hw); + if(ret_val) + return ret_val; + + if (hw->phy_type == e1000_phy_igp || + hw->phy_type == e1000_phy_igp_2) { + ret_val = e1000_copper_link_igp_setup(hw); + if(ret_val) + return ret_val; + } else if (hw->phy_type == e1000_phy_m88) { + ret_val = e1000_copper_link_mgp_setup(hw); + if(ret_val) + return ret_val; + } + + if(hw->autoneg) { + /* Setup autoneg and flow control advertisement + * and perform autonegotiation */ + ret_val = e1000_copper_link_autoneg(hw); + if(ret_val) + return ret_val; + } else { + /* PHY will be set to 10H, 10F, 100H,or 100F + * depending on value from forced_speed_duplex. */ + DEBUGOUT("Forcing speed and duplex\n"); + ret_val = e1000_phy_force_speed_duplex(hw); + if(ret_val) { + DEBUGOUT("Error Forcing Speed and Duplex\n"); + return ret_val; + } + } + + /* Check link status. Wait up to 100 microseconds for link to become + * valid. + */ + for(i = 0; i < 10; i++) { + ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); + if(ret_val) + return ret_val; + ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); + if(ret_val) + return ret_val; + + if(phy_data & MII_SR_LINK_STATUS) { + /* Config the MAC and PHY after link is up */ + ret_val = e1000_copper_link_postconfig(hw); + if(ret_val) + return ret_val; + + DEBUGOUT("Valid link established!!!\n"); + return E1000_SUCCESS; + } + udelay(10); + } + + DEBUGOUT("Unable to establish link!!!\n"); + return E1000_SUCCESS; +} + +/****************************************************************************** +* Configures PHY autoneg and flow control advertisement settings +* +* hw - Struct containing variables accessed by shared code +******************************************************************************/ +int32_t +e1000_phy_setup_autoneg(struct e1000_hw *hw) +{ + int32_t ret_val; + uint16_t mii_autoneg_adv_reg; + uint16_t mii_1000t_ctrl_reg; + + DEBUGFUNC("e1000_phy_setup_autoneg"); + + /* Read the MII Auto-Neg Advertisement Register (Address 4). */ + ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg); + if(ret_val) + return ret_val; + + /* Read the MII 1000Base-T Control Register (Address 9). */ + ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg); + if(ret_val) + return ret_val; + + /* Need to parse both autoneg_advertised and fc and set up + * the appropriate PHY registers. First we will parse for * autoneg_advertised software override. Since we can advertise * a plethora of combinations, we need to check each bit * individually. @@ -1417,7 +1602,7 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw) DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); - ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg); + ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg); if(ret_val) return ret_val; @@ -1678,6 +1863,11 @@ e1000_config_mac_to_phy(struct e1000_hw *hw) DEBUGFUNC("e1000_config_mac_to_phy"); + /* 82544 or newer MAC, Auto Speed Detection takes care of + * MAC speed/duplex configuration.*/ + if (hw->mac_type >= e1000_82544) + return E1000_SUCCESS; + /* Read the Device Control Register and set the bits to Force Speed * and Duplex. */ @@ -1688,45 +1878,25 @@ e1000_config_mac_to_phy(struct e1000_hw *hw) /* Set up duplex in the Device Control and Transmit Control * registers depending on negotiated values. */ - if (hw->phy_type == e1000_phy_igp) { - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS, - &phy_data); - if(ret_val) - return ret_val; - - if(phy_data & IGP01E1000_PSSR_FULL_DUPLEX) ctrl |= E1000_CTRL_FD; - else ctrl &= ~E1000_CTRL_FD; - - e1000_config_collision_dist(hw); + ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); + if(ret_val) + return ret_val; - /* Set up speed in the Device Control register depending on - * negotiated values. - */ - if((phy_data & IGP01E1000_PSSR_SPEED_MASK) == - IGP01E1000_PSSR_SPEED_1000MBPS) - ctrl |= E1000_CTRL_SPD_1000; - else if((phy_data & IGP01E1000_PSSR_SPEED_MASK) == - IGP01E1000_PSSR_SPEED_100MBPS) - ctrl |= E1000_CTRL_SPD_100; - } else { - ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, - &phy_data); - if(ret_val) - return ret_val; + if(phy_data & M88E1000_PSSR_DPLX) + ctrl |= E1000_CTRL_FD; + else + ctrl &= ~E1000_CTRL_FD; - if(phy_data & M88E1000_PSSR_DPLX) ctrl |= E1000_CTRL_FD; - else ctrl &= ~E1000_CTRL_FD; + e1000_config_collision_dist(hw); - e1000_config_collision_dist(hw); + /* Set up speed in the Device Control register depending on + * negotiated values. + */ + if((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) + ctrl |= E1000_CTRL_SPD_1000; + else if((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_100MBS) + ctrl |= E1000_CTRL_SPD_100; - /* Set up speed in the Device Control register depending on - * negotiated values. - */ - if((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) - ctrl |= E1000_CTRL_SPD_1000; - else if((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_100MBS) - ctrl |= E1000_CTRL_SPD_100; - } /* Write the configured values back to the Device Control Reg. */ E1000_WRITE_REG(hw, CTRL, ctrl); return E1000_SUCCESS; @@ -2494,8 +2664,8 @@ e1000_read_phy_reg(struct e1000_hw *hw, DEBUGFUNC("e1000_read_phy_reg"); - - if(hw->phy_type == e1000_phy_igp && + if((hw->phy_type == e1000_phy_igp || + hw->phy_type == e1000_phy_igp_2) && (reg_addr > MAX_PHY_MULTI_PAGE_REG)) { ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT, (uint16_t)reg_addr); @@ -2600,8 +2770,8 @@ e1000_write_phy_reg(struct e1000_hw *hw, DEBUGFUNC("e1000_write_phy_reg"); - - if(hw->phy_type == e1000_phy_igp && + if((hw->phy_type == e1000_phy_igp || + hw->phy_type == e1000_phy_igp_2) && (reg_addr > MAX_PHY_MULTI_PAGE_REG)) { ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT, (uint16_t)reg_addr); @@ -2679,19 +2849,27 @@ e1000_write_phy_reg_ex(struct e1000_hw *hw, return E1000_SUCCESS; } + /****************************************************************************** * Returns the PHY to the power-on reset state * * hw - Struct containing variables accessed by shared code ******************************************************************************/ -void +int32_t e1000_phy_hw_reset(struct e1000_hw *hw) { uint32_t ctrl, ctrl_ext; uint32_t led_ctrl; + int32_t ret_val; DEBUGFUNC("e1000_phy_hw_reset"); + /* In the case of the phy reset being blocked, it's not an error, we + * simply return success without performing the reset. */ + ret_val = e1000_check_phy_reset_block(hw); + if (ret_val) + return E1000_SUCCESS; + DEBUGOUT("Resetting Phy...\n"); if(hw->mac_type > e1000_82543) { @@ -2727,6 +2905,11 @@ e1000_phy_hw_reset(struct e1000_hw *hw) led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE); E1000_WRITE_REG(hw, LEDCTL, led_ctrl); } + + /* Wait for FW to finish PHY configuration. */ + ret_val = e1000_get_phy_cfg_done(hw); + + return ret_val; } /****************************************************************************** @@ -2744,7 +2927,19 @@ e1000_phy_reset(struct e1000_hw *hw) DEBUGFUNC("e1000_phy_reset"); - if(hw->mac_type != e1000_82541_rev_2) { + /* In the case of the phy reset being blocked, it's not an error, we + * simply return success without performing the reset. */ + ret_val = e1000_check_phy_reset_block(hw); + if (ret_val) + return E1000_SUCCESS; + + switch (hw->mac_type) { + case e1000_82541_rev_2: + ret_val = e1000_phy_hw_reset(hw); + if(ret_val) + return ret_val; + break; + default: ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data); if(ret_val) return ret_val; @@ -2755,9 +2950,10 @@ e1000_phy_reset(struct e1000_hw *hw) return ret_val; udelay(1); - } else e1000_phy_hw_reset(hw); + break; + } - if(hw->phy_type == e1000_phy_igp) + if(hw->phy_type == e1000_phy_igp || hw->phy_type == e1000_phy_igp_2) e1000_phy_init_script(hw); return E1000_SUCCESS; @@ -2811,6 +3007,9 @@ e1000_detect_gig_phy(struct e1000_hw *hw) case e1000_82547_rev_2: if(hw->phy_id == IGP01E1000_I_PHY_ID) match = TRUE; break; + case e1000_82573: + if(hw->phy_id == M88E1111_I_PHY_ID) match = TRUE; + break; default: DEBUGOUT1("Invalid MAC type %d\n", hw->mac_type); return -E1000_ERR_CONFIG; @@ -2866,7 +3065,7 @@ e1000_phy_igp_get_info(struct e1000_hw *hw, /* The downshift status is checked only once, after link is established, * and it stored in the hw->speed_downgraded parameter. */ - phy_info->downshift = hw->speed_downgraded; + phy_info->downshift = (e1000_downshift)hw->speed_downgraded; /* IGP01E1000 does not need to support it. */ phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_normal; @@ -2905,7 +3104,7 @@ e1000_phy_igp_get_info(struct e1000_hw *hw, if(ret_val) return ret_val; - /* transalte to old method */ + /* Translate to old method */ average = (max_length + min_length) / 2; if(average <= e1000_igp_cable_length_50) @@ -2940,7 +3139,7 @@ e1000_phy_m88_get_info(struct e1000_hw *hw, /* The downshift status is checked only once, after link is established, * and it stored in the hw->speed_downgraded parameter. */ - phy_info->downshift = hw->speed_downgraded; + phy_info->downshift = (e1000_downshift)hw->speed_downgraded; ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); if(ret_val) @@ -3029,7 +3228,8 @@ e1000_phy_get_info(struct e1000_hw *hw, return -E1000_ERR_CONFIG; } - if(hw->phy_type == e1000_phy_igp) + if(hw->phy_type == e1000_phy_igp || + hw->phy_type == e1000_phy_igp_2) return e1000_phy_igp_get_info(hw, phy_info); else return e1000_phy_m88_get_info(hw, phy_info); @@ -3055,11 +3255,12 @@ e1000_validate_mdi_setting(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -void +int32_t e1000_init_eeprom_params(struct e1000_hw *hw) { struct e1000_eeprom_info *eeprom = &hw->eeprom; uint32_t eecd = E1000_READ_REG(hw, EECD); + int32_t ret_val = E1000_SUCCESS; uint16_t eeprom_size; DEBUGFUNC("e1000_init_eeprom_params"); @@ -3074,6 +3275,8 @@ e1000_init_eeprom_params(struct e1000_hw *hw) eeprom->opcode_bits = 3; eeprom->address_bits = 6; eeprom->delay_usec = 50; + eeprom->use_eerd = FALSE; + eeprom->use_eewr = FALSE; break; case e1000_82540: case e1000_82545: @@ -3090,6 +3293,8 @@ e1000_init_eeprom_params(struct e1000_hw *hw) eeprom->word_size = 64; eeprom->address_bits = 6; } + eeprom->use_eerd = FALSE; + eeprom->use_eewr = FALSE; break; case e1000_82541: case e1000_82541_rev_2: @@ -3118,42 +3323,60 @@ e1000_init_eeprom_params(struct e1000_hw *hw) eeprom->address_bits = 6; } } + eeprom->use_eerd = FALSE; + eeprom->use_eewr = FALSE; + break; + case e1000_82573: + eeprom->type = e1000_eeprom_spi; + eeprom->opcode_bits = 8; + eeprom->delay_usec = 1; + if (eecd & E1000_EECD_ADDR_BITS) { + eeprom->page_size = 32; + eeprom->address_bits = 16; + } else { + eeprom->page_size = 8; + eeprom->address_bits = 8; + } + eeprom->use_eerd = TRUE; + eeprom->use_eewr = TRUE; + if(e1000_is_onboard_nvm_eeprom(hw) == FALSE) { + eeprom->type = e1000_eeprom_flash; + eeprom->word_size = 2048; + + /* Ensure that the Autonomous FLASH update bit is cleared due to + * Flash update issue on parts which use a FLASH for NVM. */ + eecd &= ~E1000_EECD_AUPDEN; + E1000_WRITE_REG(hw, EECD, eecd); + } break; default: break; } if (eeprom->type == e1000_eeprom_spi) { - eeprom->word_size = 64; - if (e1000_read_eeprom(hw, EEPROM_CFG, 1, &eeprom_size) == 0) { - eeprom_size &= EEPROM_SIZE_MASK; - - switch (eeprom_size) { - case EEPROM_SIZE_16KB: - eeprom->word_size = 8192; - break; - case EEPROM_SIZE_8KB: - eeprom->word_size = 4096; - break; - case EEPROM_SIZE_4KB: - eeprom->word_size = 2048; - break; - case EEPROM_SIZE_2KB: - eeprom->word_size = 1024; - break; - case EEPROM_SIZE_1KB: - eeprom->word_size = 512; - break; - case EEPROM_SIZE_512B: - eeprom->word_size = 256; - break; - case EEPROM_SIZE_128B: - default: - eeprom->word_size = 64; - break; - } + /* eeprom_size will be an enum [0..8] that maps to eeprom sizes 128B to + * 32KB (incremented by powers of 2). + */ + if(hw->mac_type <= e1000_82547_rev_2) { + /* Set to default value for initial eeprom read. */ + eeprom->word_size = 64; + ret_val = e1000_read_eeprom(hw, EEPROM_CFG, 1, &eeprom_size); + if(ret_val) + return ret_val; + eeprom_size = (eeprom_size & EEPROM_SIZE_MASK) >> EEPROM_SIZE_SHIFT; + /* 256B eeprom size was not supported in earlier hardware, so we + * bump eeprom_size up one to ensure that "1" (which maps to 256B) + * is never the result used in the shifting logic below. */ + if(eeprom_size) + eeprom_size++; + } else { + eeprom_size = (uint16_t)((eecd & E1000_EECD_SIZE_EX_MASK) >> + E1000_EECD_SIZE_EX_SHIFT); } + + eeprom->word_size = 1 << (eeprom_size + EEPROM_WORD_SIZE_SHIFT); } + return ret_val; } /****************************************************************************** @@ -3306,8 +3529,12 @@ e1000_acquire_eeprom(struct e1000_hw *hw) DEBUGFUNC("e1000_acquire_eeprom"); + if(e1000_get_hw_eeprom_semaphore(hw)) + return -E1000_ERR_EEPROM; + eecd = E1000_READ_REG(hw, EECD); + if (hw->mac_type != e1000_82573) { /* Request EEPROM Access */ if(hw->mac_type > e1000_82544) { eecd |= E1000_EECD_REQ; @@ -3326,6 +3553,7 @@ e1000_acquire_eeprom(struct e1000_hw *hw) return -E1000_ERR_EEPROM; } } + } /* Setup EEPROM for Read/Write */ @@ -3443,6 +3671,8 @@ e1000_release_eeprom(struct e1000_hw *hw) eecd &= ~E1000_EECD_REQ; E1000_WRITE_REG(hw, EECD, eecd); } + + e1000_put_hw_eeprom_semaphore(hw); } /****************************************************************************** @@ -3504,8 +3734,10 @@ e1000_read_eeprom(struct e1000_hw *hw, { struct e1000_eeprom_info *eeprom = &hw->eeprom; uint32_t i = 0; + int32_t ret_val; DEBUGFUNC("e1000_read_eeprom"); + /* A check for invalid values: offset too large, too many words, and not * enough words. */ @@ -3515,9 +3747,23 @@ e1000_read_eeprom(struct e1000_hw *hw, return -E1000_ERR_EEPROM; } - /* Prepare the EEPROM for reading */ - if(e1000_acquire_eeprom(hw) != E1000_SUCCESS) - return -E1000_ERR_EEPROM; + /* FLASH reads without acquiring the semaphore are safe in 82573-based + * controllers. + */ + if ((e1000_is_onboard_nvm_eeprom(hw) == TRUE) || + (hw->mac_type != e1000_82573)) { + /* Prepare the EEPROM for reading */ + if(e1000_acquire_eeprom(hw) != E1000_SUCCESS) + return -E1000_ERR_EEPROM; + } + + if(eeprom->use_eerd == TRUE) { + ret_val = e1000_read_eeprom_eerd(hw, offset, words, data); + if ((e1000_is_onboard_nvm_eeprom(hw) == TRUE) || + (hw->mac_type != e1000_82573)) + e1000_release_eeprom(hw); + return ret_val; + } if(eeprom->type == e1000_eeprom_spi) { uint16_t word_in; @@ -3569,65 +3815,212 @@ e1000_read_eeprom(struct e1000_hw *hw, } /****************************************************************************** - * Verifies that the EEPROM has a valid checksum + * Reads a 16 bit word from the EEPROM using the EERD register. * * hw - Struct containing variables accessed by shared code - * - * Reads the first 64 16 bit words of the EEPROM and sums the values read. - * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is - * valid. + * offset - offset of word in the EEPROM to read + * data - word read from the EEPROM + * words - number of words to read *****************************************************************************/ int32_t -e1000_validate_eeprom_checksum(struct e1000_hw *hw) +e1000_read_eeprom_eerd(struct e1000_hw *hw, + uint16_t offset, + uint16_t words, + uint16_t *data) { - uint16_t checksum = 0; - uint16_t i, eeprom_data; + uint32_t i, eerd = 0; + int32_t error = 0; - DEBUGFUNC("e1000_validate_eeprom_checksum"); + for (i = 0; i < words; i++) { + eerd = ((offset+i) << E1000_EEPROM_RW_ADDR_SHIFT) + + E1000_EEPROM_RW_REG_START; - for(i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) { - if(e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) { - DEBUGOUT("EEPROM Read Error\n"); - return -E1000_ERR_EEPROM; + E1000_WRITE_REG(hw, EERD, eerd); + error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_READ); + + if(error) { + break; } - checksum += eeprom_data; - } - - if(checksum == (uint16_t) EEPROM_SUM) - return E1000_SUCCESS; - else { - DEBUGOUT("EEPROM Checksum Invalid\n"); - return -E1000_ERR_EEPROM; + data[i] = (E1000_READ_REG(hw, EERD) >> E1000_EEPROM_RW_REG_DATA); + } + + return error; } /****************************************************************************** - * Calculates the EEPROM checksum and writes it to the EEPROM + * Writes a 16 bit word from the EEPROM using the EEWR register. * * hw - Struct containing variables accessed by shared code - * - * Sums the first 63 16 bit words of the EEPROM. Subtracts the sum from 0xBABA. - * Writes the difference to word offset 63 of the EEPROM. + * offset - offset of word in the EEPROM to read + * data - word read from the EEPROM + * words - number of words to read *****************************************************************************/ int32_t -e1000_update_eeprom_checksum(struct e1000_hw *hw) +e1000_write_eeprom_eewr(struct e1000_hw *hw, + uint16_t offset, + uint16_t words, + uint16_t *data) { - uint16_t checksum = 0; - uint16_t i, eeprom_data; + uint32_t register_value = 0; + uint32_t i = 0; + int32_t error = 0; - DEBUGFUNC("e1000_update_eeprom_checksum"); + for (i = 0; i < words; i++) { + register_value = (data[i] << E1000_EEPROM_RW_REG_DATA) | + ((offset+i) << E1000_EEPROM_RW_ADDR_SHIFT) | + E1000_EEPROM_RW_REG_START; - for(i = 0; i < EEPROM_CHECKSUM_REG; i++) { - if(e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) { - DEBUGOUT("EEPROM Read Error\n"); - return -E1000_ERR_EEPROM; - } - checksum += eeprom_data; - } - checksum = (uint16_t) EEPROM_SUM - checksum; + error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_WRITE); + if(error) { + break; + } + + E1000_WRITE_REG(hw, EEWR, register_value); + + error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_WRITE); + + if(error) { + break; + } + } + + return error; +} + +/****************************************************************************** + * Polls the status bit (bit 1) of the EERD to determine when the read is done. + * + * hw - Struct containing variables accessed by shared code + *****************************************************************************/ +int32_t +e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd) +{ + uint32_t attempts = 100000; + uint32_t i, reg = 0; + int32_t done = E1000_ERR_EEPROM; + + for(i = 0; i < attempts; i++) { + if(eerd == E1000_EEPROM_POLL_READ) + reg = E1000_READ_REG(hw, EERD); + else + reg = E1000_READ_REG(hw, EEWR); + + if(reg & E1000_EEPROM_RW_REG_DONE) { + done = E1000_SUCCESS; + break; + } + udelay(5); + } + + return done; +} + +/*************************************************************************** +* Description: Determines if the onboard NVM is FLASH or EEPROM. +* +* hw - Struct containing variables accessed by shared code +****************************************************************************/ +boolean_t +e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw) +{ + uint32_t eecd = 0; + + if(hw->mac_type == e1000_82573) { + eecd = E1000_READ_REG(hw, EECD); + + /* Isolate bits 15 & 16 */ + eecd = ((eecd >> 15) & 0x03); + + /* If both bits are set, device is Flash type */ + if(eecd == 0x03) { + return FALSE; + } + } + return TRUE; +} + +/****************************************************************************** + * Verifies that the EEPROM has a valid checksum + * + * hw - Struct containing variables accessed by shared code + * + * Reads the first 64 16 bit words of the EEPROM and sums the values read. + * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is + * valid. + *****************************************************************************/ +int32_t +e1000_validate_eeprom_checksum(struct e1000_hw *hw) +{ + uint16_t checksum = 0; + uint16_t i, eeprom_data; + + DEBUGFUNC("e1000_validate_eeprom_checksum"); + + if ((hw->mac_type == e1000_82573) && + (e1000_is_onboard_nvm_eeprom(hw) == FALSE)) { + /* Check bit 4 of word 10h. If it is 0, firmware is done updating + * 10h-12h. Checksum may need to be fixed. */ + e1000_read_eeprom(hw, 0x10, 1, &eeprom_data); + if ((eeprom_data & 0x10) == 0) { + /* Read 0x23 and check bit 15. This bit is a 1 when the checksum + * has already been fixed. If the checksum is still wrong and this + * bit is a 1, we need to return bad checksum. Otherwise, we need + * to set this bit to a 1 and update the checksum. */ + e1000_read_eeprom(hw, 0x23, 1, &eeprom_data); + if ((eeprom_data & 0x8000) == 0) { + eeprom_data |= 0x8000; + e1000_write_eeprom(hw, 0x23, 1, &eeprom_data); + e1000_update_eeprom_checksum(hw); + } + } + } + + for(i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) { + if(e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) { + DEBUGOUT("EEPROM Read Error\n"); + return -E1000_ERR_EEPROM; + } + checksum += eeprom_data; + } + + if(checksum == (uint16_t) EEPROM_SUM) + return E1000_SUCCESS; + else { + DEBUGOUT("EEPROM Checksum Invalid\n"); + return -E1000_ERR_EEPROM; + } +} + +/****************************************************************************** + * Calculates the EEPROM checksum and writes it to the EEPROM + * + * hw - Struct containing variables accessed by shared code + * + * Sums the first 63 16 bit words of the EEPROM. Subtracts the sum from 0xBABA. + * Writes the difference to word offset 63 of the EEPROM. + *****************************************************************************/ +int32_t +e1000_update_eeprom_checksum(struct e1000_hw *hw) +{ + uint16_t checksum = 0; + uint16_t i, eeprom_data; + + DEBUGFUNC("e1000_update_eeprom_checksum"); + + for(i = 0; i < EEPROM_CHECKSUM_REG; i++) { + if(e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) { + DEBUGOUT("EEPROM Read Error\n"); + return -E1000_ERR_EEPROM; + } + checksum += eeprom_data; + } + checksum = (uint16_t) EEPROM_SUM - checksum; if(e1000_write_eeprom(hw, EEPROM_CHECKSUM_REG, 1, &checksum) < 0) { DEBUGOUT("EEPROM Write Error\n"); return -E1000_ERR_EEPROM; + } else if (hw->eeprom.type == e1000_eeprom_flash) { + e1000_commit_shadow_ram(hw); } return E1000_SUCCESS; } @@ -3663,6 +4056,10 @@ e1000_write_eeprom(struct e1000_hw *hw, return -E1000_ERR_EEPROM; } + /* 82573 reads only through eerd */ + if(eeprom->use_eewr == TRUE) + return e1000_write_eeprom_eewr(hw, offset, words, data); + /* Prepare the EEPROM for writing */ if (e1000_acquire_eeprom(hw) != E1000_SUCCESS) return -E1000_ERR_EEPROM; @@ -3832,6 +4229,65 @@ e1000_write_eeprom_microwire(struct e1000_hw *hw, return E1000_SUCCESS; } +/****************************************************************************** + * Flushes the cached eeprom to NVM. This is done by saving the modified values + * in the eeprom cache and the non modified values in the currently active bank + * to the new bank. + * + * hw - Struct containing variables accessed by shared code + * offset - offset of word in the EEPROM to read + * data - word read from the EEPROM + * words - number of words to read + *****************************************************************************/ +int32_t +e1000_commit_shadow_ram(struct e1000_hw *hw) +{ + uint32_t attempts = 100000; + uint32_t eecd = 0; + uint32_t flop = 0; + uint32_t i = 0; + int32_t error = E1000_SUCCESS; + + /* The flop register will be used to determine if flash type is STM */ + flop = E1000_READ_REG(hw, FLOP); + + if (hw->mac_type == e1000_82573) { + for (i=0; i < attempts; i++) { + eecd = E1000_READ_REG(hw, EECD); + if ((eecd & E1000_EECD_FLUPD) == 0) { + break; + } + udelay(5); + } + + if (i == attempts) { + return -E1000_ERR_EEPROM; + } + + /* If STM opcode located in bits 15:8 of flop, reset firmware */ + if ((flop & 0xFF00) == E1000_STM_OPCODE) { + E1000_WRITE_REG(hw, HICR, E1000_HICR_FW_RESET); + } + + /* Perform the flash update */ + E1000_WRITE_REG(hw, EECD, eecd | E1000_EECD_FLUPD); + + for (i=0; i < attempts; i++) { + eecd = E1000_READ_REG(hw, EECD); + if ((eecd & E1000_EECD_FLUPD) == 0) { + break; + } + udelay(5); + } + + if (i == attempts) { + return -E1000_ERR_EEPROM; + } + } + + return error; +} + /****************************************************************************** * Reads the adapter's part number from the EEPROM * @@ -3911,6 +4367,7 @@ void e1000_init_rx_addrs(struct e1000_hw *hw) { uint32_t i; + uint32_t rar_num; DEBUGFUNC("e1000_init_rx_addrs"); @@ -3919,9 +4376,10 @@ e1000_init_rx_addrs(struct e1000_hw *hw) e1000_rar_set(hw, hw->mac_addr, 0); + rar_num = E1000_RAR_ENTRIES; /* Zero out the other 15 receive addresses. */ DEBUGOUT("Clearing RAR[1-15]\n"); - for(i = 1; i < E1000_RAR_ENTRIES; i++) { + for(i = 1; i < rar_num; i++) { E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0); E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0); } @@ -3950,7 +4408,9 @@ e1000_mc_addr_list_update(struct e1000_hw *hw, { uint32_t hash_value; uint32_t i; - + uint32_t num_rar_entry; + uint32_t num_mta_entry; + DEBUGFUNC("e1000_mc_addr_list_update"); /* Set the new number of MC addresses that we are being requested to use. */ @@ -3958,14 +4418,16 @@ e1000_mc_addr_list_update(struct e1000_hw *hw, /* Clear RAR[1-15] */ DEBUGOUT(" Clearing RAR[1-15]\n"); - for(i = rar_used_count; i < E1000_RAR_ENTRIES; i++) { + num_rar_entry = E1000_RAR_ENTRIES; + for(i = rar_used_count; i < num_rar_entry; i++) { E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0); E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0); } /* Clear the MTA */ DEBUGOUT(" Clearing MTA\n"); - for(i = 0; i < E1000_NUM_MTA_REGISTERS; i++) { + num_mta_entry = E1000_NUM_MTA_REGISTERS; + for(i = 0; i < num_mta_entry; i++) { E1000_WRITE_REG_ARRAY(hw, MTA, i, 0); } @@ -3989,7 +4451,7 @@ e1000_mc_addr_list_update(struct e1000_hw *hw, /* Place this multicast address in the RAR if there is room, * * else put it in the MTA */ - if(rar_used_count < E1000_RAR_ENTRIES) { + if (rar_used_count < num_rar_entry) { e1000_rar_set(hw, mc_addr_list + (i * (ETH_LENGTH_OF_ADDRESS + pad)), rar_used_count); @@ -4040,6 +4502,7 @@ e1000_hash_mc_addr(struct e1000_hw *hw, } hash_value &= 0xFFF; + return hash_value; } @@ -4144,12 +4607,33 @@ void e1000_clear_vfta(struct e1000_hw *hw) { uint32_t offset; - - for(offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) - E1000_WRITE_REG_ARRAY(hw, VFTA, offset, 0); + uint32_t vfta_value = 0; + uint32_t vfta_offset = 0; + uint32_t vfta_bit_in_reg = 0; + + if (hw->mac_type == e1000_82573) { + if (hw->mng_cookie.vlan_id != 0) { + /* The VFTA is a 4096b bit-field, each identifying a single VLAN + * ID. The following operations determine which 32b entry + * (i.e. offset) into the array we want to set the VLAN ID + * (i.e. bit) of the manageability unit. */ + vfta_offset = (hw->mng_cookie.vlan_id >> + E1000_VFTA_ENTRY_SHIFT) & + E1000_VFTA_ENTRY_MASK; + vfta_bit_in_reg = 1 << (hw->mng_cookie.vlan_id & + E1000_VFTA_ENTRY_BIT_SHIFT_MASK); + } + } + for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) { + /* If the offset we want to clear is the same offset of the + * manageability VLAN ID, then clear all bits except that of the + * manageability unit */ + vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0; + E1000_WRITE_REG_ARRAY(hw, VFTA, offset, vfta_value); + } } -static int32_t +int32_t e1000_id_led_init(struct e1000_hw * hw) { uint32_t ledctl; @@ -4480,6 +4964,19 @@ e1000_clear_hw_cntrs(struct e1000_hw *hw) temp = E1000_READ_REG(hw, MGTPRC); temp = E1000_READ_REG(hw, MGTPDC); temp = E1000_READ_REG(hw, MGTPTC); + + if(hw->mac_type <= e1000_82547_rev_2) return; + + temp = E1000_READ_REG(hw, IAC); + temp = E1000_READ_REG(hw, ICRXOC); + temp = E1000_READ_REG(hw, ICRXPTC); + temp = E1000_READ_REG(hw, ICRXATC); + temp = E1000_READ_REG(hw, ICTXPTC); + temp = E1000_READ_REG(hw, ICTXATC); + temp = E1000_READ_REG(hw, ICTXQEC); + temp = E1000_READ_REG(hw, ICTXQMTC); + temp = E1000_READ_REG(hw, ICRXDMTC); + } /****************************************************************************** @@ -4646,6 +5143,11 @@ e1000_get_bus_info(struct e1000_hw *hw) hw->bus_speed = e1000_bus_speed_unknown; hw->bus_width = e1000_bus_width_unknown; break; + case e1000_82573: + hw->bus_type = e1000_bus_type_pci_express; + hw->bus_speed = e1000_bus_speed_2500; + hw->bus_width = e1000_bus_width_pciex_4; + break; default: status = E1000_READ_REG(hw, STATUS); hw->bus_type = (status & E1000_STATUS_PCIX_MODE) ? @@ -4749,6 +5251,7 @@ e1000_get_cable_length(struct e1000_hw *hw, /* Use old method for Phy older than IGP */ if(hw->phy_type == e1000_phy_m88) { + ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); if(ret_val) @@ -4865,7 +5368,8 @@ e1000_check_polarity(struct e1000_hw *hw, return ret_val; *polarity = (phy_data & M88E1000_PSSR_REV_POLARITY) >> M88E1000_PSSR_REV_POLARITY_SHIFT; - } else if(hw->phy_type == e1000_phy_igp) { + } else if(hw->phy_type == e1000_phy_igp || + hw->phy_type == e1000_phy_igp_2) { /* Read the Status register to check the speed */ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS, &phy_data); @@ -4917,7 +5421,8 @@ e1000_check_downshift(struct e1000_hw *hw) DEBUGFUNC("e1000_check_downshift"); - if(hw->phy_type == e1000_phy_igp) { + if(hw->phy_type == e1000_phy_igp || + hw->phy_type == e1000_phy_igp_2) { ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_LINK_HEALTH, &phy_data); if(ret_val) @@ -4933,6 +5438,7 @@ e1000_check_downshift(struct e1000_hw *hw) hw->speed_downgraded = (phy_data & M88E1000_PSSR_DOWNSHIFT) >> M88E1000_PSSR_DOWNSHIFT_SHIFT; } + return E1000_SUCCESS; } @@ -5047,7 +5553,7 @@ e1000_config_dsp_after_link_change(struct e1000_hw *hw, if(ret_val) return ret_val; - msec_delay(20); + msec_delay_irq(20); ret_val = e1000_write_phy_reg(hw, 0x0000, IGP01E1000_IEEE_FORCE_GIGA); @@ -5071,7 +5577,7 @@ e1000_config_dsp_after_link_change(struct e1000_hw *hw, if(ret_val) return ret_val; - msec_delay(20); + msec_delay_irq(20); /* Now enable the transmitter */ ret_val = e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data); @@ -5096,7 +5602,7 @@ e1000_config_dsp_after_link_change(struct e1000_hw *hw, if(ret_val) return ret_val; - msec_delay(20); + msec_delay_irq(20); ret_val = e1000_write_phy_reg(hw, 0x0000, IGP01E1000_IEEE_FORCE_GIGA); @@ -5112,7 +5618,7 @@ e1000_config_dsp_after_link_change(struct e1000_hw *hw, if(ret_val) return ret_val; - msec_delay(20); + msec_delay_irq(20); /* Now enable the transmitter */ ret_val = e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data); @@ -5187,22 +5693,36 @@ e1000_set_d3_lplu_state(struct e1000_hw *hw, uint16_t phy_data; DEBUGFUNC("e1000_set_d3_lplu_state"); - if(!((hw->mac_type == e1000_82541_rev_2) || - (hw->mac_type == e1000_82547_rev_2))) + if(hw->phy_type != e1000_phy_igp && hw->phy_type != e1000_phy_igp_2) return E1000_SUCCESS; /* During driver activity LPLU should not be used or it will attain link * from the lowest speeds starting from 10Mbps. The capability is used for * Dx transitions and states */ - ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO, &phy_data); - if(ret_val) - return ret_val; - - if(!active) { - phy_data &= ~IGP01E1000_GMII_FLEX_SPD; - ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data); + if(hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) { + ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO, &phy_data); + if(ret_val) + return ret_val; + } else { + ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data); if(ret_val) return ret_val; + } + + if(!active) { + if(hw->mac_type == e1000_82541_rev_2 || + hw->mac_type == e1000_82547_rev_2) { + phy_data &= ~IGP01E1000_GMII_FLEX_SPD; + ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data); + if(ret_val) + return ret_val; + } else { + phy_data &= ~IGP02E1000_PM_D3_LPLU; + ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, + phy_data); + if (ret_val) + return ret_val; + } /* LPLU and SmartSpeed are mutually exclusive. LPLU is used during * Dx states where the power conservation is most important. During @@ -5236,11 +5756,105 @@ e1000_set_d3_lplu_state(struct e1000_hw *hw, (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_ALL ) || (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_100_ALL)) { - phy_data |= IGP01E1000_GMII_FLEX_SPD; - ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data); + if(hw->mac_type == e1000_82541_rev_2 || + hw->mac_type == e1000_82547_rev_2) { + phy_data |= IGP01E1000_GMII_FLEX_SPD; + ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data); + if(ret_val) + return ret_val; + } else { + phy_data |= IGP02E1000_PM_D3_LPLU; + ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, + phy_data); + if (ret_val) + return ret_val; + } + + /* When LPLU is enabled we should disable SmartSpeed */ + ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data); + if(ret_val) + return ret_val; + + phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, phy_data); + if(ret_val) + return ret_val; + + } + return E1000_SUCCESS; +} + +/***************************************************************************** + * + * This function sets the lplu d0 state according to the active flag. When + * activating lplu this function also disables smart speed and vise versa. + * lplu will not be activated unless the device autonegotiation advertisment + * meets standards of either 10 or 10/100 or 10/100/1000 at all duplexes. + * hw: Struct containing variables accessed by shared code + * active - true to enable lplu false to disable lplu. + * + * returns: - E1000_ERR_PHY if fail to read/write the PHY + * E1000_SUCCESS at any other case. + * + ****************************************************************************/ + +int32_t +e1000_set_d0_lplu_state(struct e1000_hw *hw, + boolean_t active) +{ + int32_t ret_val; + uint16_t phy_data; + DEBUGFUNC("e1000_set_d0_lplu_state"); + + if(hw->mac_type <= e1000_82547_rev_2) + return E1000_SUCCESS; + + ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data); if(ret_val) return ret_val; + if (!active) { + phy_data &= ~IGP02E1000_PM_D0_LPLU; + ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data); + if (ret_val) + return ret_val; + + /* LPLU and SmartSpeed are mutually exclusive. LPLU is used during + * Dx states where the power conservation is most important. During + * driver activity we should enable SmartSpeed, so performance is + * maintained. */ + if (hw->smart_speed == e1000_smart_speed_on) { + ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + &phy_data); + if(ret_val) + return ret_val; + + phy_data |= IGP01E1000_PSCFR_SMART_SPEED; + ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + phy_data); + if(ret_val) + return ret_val; + } else if (hw->smart_speed == e1000_smart_speed_off) { + ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + &phy_data); + if (ret_val) + return ret_val; + + phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + phy_data); + if(ret_val) + return ret_val; + } + + + } else { + + phy_data |= IGP02E1000_PM_D0_LPLU; + ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data); + if (ret_val) + return ret_val; + /* When LPLU is enabled we should disable SmartSpeed */ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data); if(ret_val) @@ -5318,18 +5932,350 @@ e1000_set_vco_speed(struct e1000_hw *hw) return E1000_SUCCESS; } -static int32_t -e1000_polarity_reversal_workaround(struct e1000_hw *hw) -{ - int32_t ret_val; - uint16_t mii_status_reg; - uint16_t i; - /* Polarity reversal workaround for forced 10F/10H links. */ +/***************************************************************************** + * This function reads the cookie from ARC ram. + * + * returns: - E1000_SUCCESS . + ****************************************************************************/ +int32_t +e1000_host_if_read_cookie(struct e1000_hw * hw, uint8_t *buffer) +{ + uint8_t i; + uint32_t offset = E1000_MNG_DHCP_COOKIE_OFFSET; + uint8_t length = E1000_MNG_DHCP_COOKIE_LENGTH; - /* Disable the transmitter on the PHY */ + length = (length >> 2); + offset = (offset >> 2); - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019); + for (i = 0; i < length; i++) { + *((uint32_t *) buffer + i) = + E1000_READ_REG_ARRAY_DWORD(hw, HOST_IF, offset + i); + } + return E1000_SUCCESS; +} + + +/***************************************************************************** + * This function checks whether the HOST IF is enabled for command operaton + * and also checks whether the previous command is completed. + * It busy waits in case of previous command is not completed. + * + * returns: - E1000_ERR_HOST_INTERFACE_COMMAND in case if is not ready or + * timeout + * - E1000_SUCCESS for success. + ****************************************************************************/ +int32_t +e1000_mng_enable_host_if(struct e1000_hw * hw) +{ + uint32_t hicr; + uint8_t i; + + /* Check that the host interface is enabled. */ + hicr = E1000_READ_REG(hw, HICR); + if ((hicr & E1000_HICR_EN) == 0) { + DEBUGOUT("E1000_HOST_EN bit disabled.\n"); + return -E1000_ERR_HOST_INTERFACE_COMMAND; + } + /* check the previous command is completed */ + for (i = 0; i < E1000_MNG_DHCP_COMMAND_TIMEOUT; i++) { + hicr = E1000_READ_REG(hw, HICR); + if (!(hicr & E1000_HICR_C)) + break; + msec_delay_irq(1); + } + + if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) { + DEBUGOUT("Previous command timeout failed .\n"); + return -E1000_ERR_HOST_INTERFACE_COMMAND; + } + return E1000_SUCCESS; +} + +/***************************************************************************** + * This function writes the buffer content at the offset given on the host if. + * It also does alignment considerations to do the writes in most efficient way. + * Also fills up the sum of the buffer in *buffer parameter. + * + * returns - E1000_SUCCESS for success. + ****************************************************************************/ +int32_t +e1000_mng_host_if_write(struct e1000_hw * hw, uint8_t *buffer, + uint16_t length, uint16_t offset, uint8_t *sum) +{ + uint8_t *tmp; + uint8_t *bufptr = buffer; + uint32_t data; + uint16_t remaining, i, j, prev_bytes; + + /* sum = only sum of the data and it is not checksum */ + + if (length == 0 || offset + length > E1000_HI_MAX_MNG_DATA_LENGTH) { + return -E1000_ERR_PARAM; + } + + tmp = (uint8_t *)&data; + prev_bytes = offset & 0x3; + offset &= 0xFFFC; + offset >>= 2; + + if (prev_bytes) { + data = E1000_READ_REG_ARRAY_DWORD(hw, HOST_IF, offset); + for (j = prev_bytes; j < sizeof(uint32_t); j++) { + *(tmp + j) = *bufptr++; + *sum += *(tmp + j); + } + E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, offset, data); + length -= j - prev_bytes; + offset++; + } + + remaining = length & 0x3; + length -= remaining; + + /* Calculate length in DWORDs */ + length >>= 2; + + /* The device driver writes the relevant command block into the + * ram area. */ + for (i = 0; i < length; i++) { + for (j = 0; j < sizeof(uint32_t); j++) { + *(tmp + j) = *bufptr++; + *sum += *(tmp + j); + } + + E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, offset + i, data); + } + if (remaining) { + for (j = 0; j < sizeof(uint32_t); j++) { + if (j < remaining) + *(tmp + j) = *bufptr++; + else + *(tmp + j) = 0; + + *sum += *(tmp + j); + } + E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, offset + i, data); + } + + return E1000_SUCCESS; +} + + +/***************************************************************************** + * This function writes the command header after does the checksum calculation. + * + * returns - E1000_SUCCESS for success. + ****************************************************************************/ +int32_t +e1000_mng_write_cmd_header(struct e1000_hw * hw, + struct e1000_host_mng_command_header * hdr) +{ + uint16_t i; + uint8_t sum; + uint8_t *buffer; + + /* Write the whole command header structure which includes sum of + * the buffer */ + + uint16_t length = sizeof(struct e1000_host_mng_command_header); + + sum = hdr->checksum; + hdr->checksum = 0; + + buffer = (uint8_t *) hdr; + i = length; + while(i--) + sum += buffer[i]; + + hdr->checksum = 0 - sum; + + length >>= 2; + /* The device driver writes the relevant command block into the ram area. */ + for (i = 0; i < length; i++) + E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, i, *((uint32_t *) hdr + i)); + + return E1000_SUCCESS; +} + + +/***************************************************************************** + * This function indicates to ARC that a new command is pending which completes + * one write operation by the driver. + * + * returns - E1000_SUCCESS for success. + ****************************************************************************/ +int32_t +e1000_mng_write_commit( + struct e1000_hw * hw) +{ + uint32_t hicr; + + hicr = E1000_READ_REG(hw, HICR); + /* Setting this bit tells the ARC that a new command is pending. */ + E1000_WRITE_REG(hw, HICR, hicr | E1000_HICR_C); + + return E1000_SUCCESS; +} + + +/***************************************************************************** + * This function checks the mode of the firmware. + * + * returns - TRUE when the mode is IAMT or FALSE. + ****************************************************************************/ +boolean_t +e1000_check_mng_mode( + struct e1000_hw *hw) +{ + uint32_t fwsm; + + fwsm = E1000_READ_REG(hw, FWSM); + + if((fwsm & E1000_FWSM_MODE_MASK) == + (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT)) + return TRUE; + + return FALSE; +} + + +/***************************************************************************** + * This function writes the dhcp info . + ****************************************************************************/ +int32_t +e1000_mng_write_dhcp_info(struct e1000_hw * hw, uint8_t *buffer, + uint16_t length) +{ + int32_t ret_val; + struct e1000_host_mng_command_header hdr; + + hdr.command_id = E1000_MNG_DHCP_TX_PAYLOAD_CMD; + hdr.command_length = length; + hdr.reserved1 = 0; + hdr.reserved2 = 0; + hdr.checksum = 0; + + ret_val = e1000_mng_enable_host_if(hw); + if (ret_val == E1000_SUCCESS) { + ret_val = e1000_mng_host_if_write(hw, buffer, length, sizeof(hdr), + &(hdr.checksum)); + if (ret_val == E1000_SUCCESS) { + ret_val = e1000_mng_write_cmd_header(hw, &hdr); + if (ret_val == E1000_SUCCESS) + ret_val = e1000_mng_write_commit(hw); + } + } + return ret_val; +} + + +/***************************************************************************** + * This function calculates the checksum. + * + * returns - checksum of buffer contents. + ****************************************************************************/ +uint8_t +e1000_calculate_mng_checksum(char *buffer, uint32_t length) +{ + uint8_t sum = 0; + uint32_t i; + + if (!buffer) + return 0; + + for (i=0; i < length; i++) + sum += buffer[i]; + + return (uint8_t) (0 - sum); +} + +/***************************************************************************** + * This function checks whether tx pkt filtering needs to be enabled or not. + * + * returns - TRUE for packet filtering or FALSE. + ****************************************************************************/ +boolean_t +e1000_enable_tx_pkt_filtering(struct e1000_hw *hw) +{ + /* called in init as well as watchdog timer functions */ + + int32_t ret_val, checksum; + boolean_t tx_filter = FALSE; + struct e1000_host_mng_dhcp_cookie *hdr = &(hw->mng_cookie); + uint8_t *buffer = (uint8_t *) &(hw->mng_cookie); + + if (e1000_check_mng_mode(hw)) { + ret_val = e1000_mng_enable_host_if(hw); + if (ret_val == E1000_SUCCESS) { + ret_val = e1000_host_if_read_cookie(hw, buffer); + if (ret_val == E1000_SUCCESS) { + checksum = hdr->checksum; + hdr->checksum = 0; + if ((hdr->signature == E1000_IAMT_SIGNATURE) && + checksum == e1000_calculate_mng_checksum((char *)buffer, + E1000_MNG_DHCP_COOKIE_LENGTH)) { + if (hdr->status & + E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT) + tx_filter = TRUE; + } else + tx_filter = TRUE; + } else + tx_filter = TRUE; + } + } + + hw->tx_pkt_filtering = tx_filter; + return tx_filter; +} + +/****************************************************************************** + * Verifies the hardware needs to allow ARPs to be processed by the host + * + * hw - Struct containing variables accessed by shared code + * + * returns: - TRUE/FALSE + * + *****************************************************************************/ +uint32_t +e1000_enable_mng_pass_thru(struct e1000_hw *hw) +{ + uint32_t manc; + uint32_t fwsm, factps; + + if (hw->asf_firmware_present) { + manc = E1000_READ_REG(hw, MANC); + + if (!(manc & E1000_MANC_RCV_TCO_EN) || + !(manc & E1000_MANC_EN_MAC_ADDR_FILTER)) + return FALSE; + if (e1000_arc_subsystem_valid(hw) == TRUE) { + fwsm = E1000_READ_REG(hw, FWSM); + factps = E1000_READ_REG(hw, FACTPS); + + if (((fwsm & E1000_FWSM_MODE_MASK) == + (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT)) && + (factps & E1000_FACTPS_MNGCG)) + return TRUE; + } else + if ((manc & E1000_MANC_SMBUS_EN) && !(manc & E1000_MANC_ASF_EN)) + return TRUE; + } + return FALSE; +} + +static int32_t +e1000_polarity_reversal_workaround(struct e1000_hw *hw) +{ + int32_t ret_val; + uint16_t mii_status_reg; + uint16_t i; + + /* Polarity reversal workaround for forced 10F/10H links. */ + + /* Disable the transmitter on the PHY */ + + ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019); if(ret_val) return ret_val; ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFFF); @@ -5403,3 +6349,265 @@ e1000_polarity_reversal_workaround(struct e1000_hw *hw) return E1000_SUCCESS; } +/*************************************************************************** + * + * Disables PCI-Express master access. + * + * hw: Struct containing variables accessed by shared code + * + * returns: - none. + * + ***************************************************************************/ +void +e1000_set_pci_express_master_disable(struct e1000_hw *hw) +{ + uint32_t ctrl; + + DEBUGFUNC("e1000_set_pci_express_master_disable"); + + if (hw->bus_type != e1000_bus_type_pci_express) + return; + + ctrl = E1000_READ_REG(hw, CTRL); + ctrl |= E1000_CTRL_GIO_MASTER_DISABLE; + E1000_WRITE_REG(hw, CTRL, ctrl); +} + +/*************************************************************************** + * + * Enables PCI-Express master access. + * + * hw: Struct containing variables accessed by shared code + * + * returns: - none. + * + ***************************************************************************/ +void +e1000_enable_pciex_master(struct e1000_hw *hw) +{ + uint32_t ctrl; + + DEBUGFUNC("e1000_enable_pciex_master"); + + if (hw->bus_type != e1000_bus_type_pci_express) + return; + + ctrl = E1000_READ_REG(hw, CTRL); + ctrl &= ~E1000_CTRL_GIO_MASTER_DISABLE; + E1000_WRITE_REG(hw, CTRL, ctrl); +} + +/******************************************************************************* + * + * Disables PCI-Express master access and verifies there are no pending requests + * + * hw: Struct containing variables accessed by shared code + * + * returns: - E1000_ERR_MASTER_REQUESTS_PENDING if master disable bit hasn't + * caused the master requests to be disabled. + * E1000_SUCCESS master requests disabled. + * + ******************************************************************************/ +int32_t +e1000_disable_pciex_master(struct e1000_hw *hw) +{ + int32_t timeout = MASTER_DISABLE_TIMEOUT; /* 80ms */ + + DEBUGFUNC("e1000_disable_pciex_master"); + + if (hw->bus_type != e1000_bus_type_pci_express) + return E1000_SUCCESS; + + e1000_set_pci_express_master_disable(hw); + + while(timeout) { + if(!(E1000_READ_REG(hw, STATUS) & E1000_STATUS_GIO_MASTER_ENABLE)) + break; + else + udelay(100); + timeout--; + } + + if(!timeout) { + DEBUGOUT("Master requests are pending.\n"); + return -E1000_ERR_MASTER_REQUESTS_PENDING; + } + + return E1000_SUCCESS; +} + +/******************************************************************************* + * + * Check for EEPROM Auto Read bit done. + * + * hw: Struct containing variables accessed by shared code + * + * returns: - E1000_ERR_RESET if fail to reset MAC + * E1000_SUCCESS at any other case. + * + ******************************************************************************/ +int32_t +e1000_get_auto_rd_done(struct e1000_hw *hw) +{ + int32_t timeout = AUTO_READ_DONE_TIMEOUT; + + DEBUGFUNC("e1000_get_auto_rd_done"); + + switch (hw->mac_type) { + default: + msec_delay(5); + break; + case e1000_82573: + while(timeout) { + if (E1000_READ_REG(hw, EECD) & E1000_EECD_AUTO_RD) break; + else msec_delay(1); + timeout--; + } + + if(!timeout) { + DEBUGOUT("Auto read by HW from EEPROM has not completed.\n"); + return -E1000_ERR_RESET; + } + break; + } + + return E1000_SUCCESS; +} + +/*************************************************************************** + * Checks if the PHY configuration is done + * + * hw: Struct containing variables accessed by shared code + * + * returns: - E1000_ERR_RESET if fail to reset MAC + * E1000_SUCCESS at any other case. + * + ***************************************************************************/ +int32_t +e1000_get_phy_cfg_done(struct e1000_hw *hw) +{ + DEBUGFUNC("e1000_get_phy_cfg_done"); + + /* Simply wait for 10ms */ + msec_delay(10); + + return E1000_SUCCESS; +} + +/*************************************************************************** + * + * Using the combination of SMBI and SWESMBI semaphore bits when resetting + * adapter or Eeprom access. + * + * hw: Struct containing variables accessed by shared code + * + * returns: - E1000_ERR_EEPROM if fail to access EEPROM. + * E1000_SUCCESS at any other case. + * + ***************************************************************************/ +int32_t +e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw) +{ + int32_t timeout; + uint32_t swsm; + + DEBUGFUNC("e1000_get_hw_eeprom_semaphore"); + + if(!hw->eeprom_semaphore_present) + return E1000_SUCCESS; + + + /* Get the FW semaphore. */ + timeout = hw->eeprom.word_size + 1; + while(timeout) { + swsm = E1000_READ_REG(hw, SWSM); + swsm |= E1000_SWSM_SWESMBI; + E1000_WRITE_REG(hw, SWSM, swsm); + /* if we managed to set the bit we got the semaphore. */ + swsm = E1000_READ_REG(hw, SWSM); + if(swsm & E1000_SWSM_SWESMBI) + break; + + udelay(50); + timeout--; + } + + if(!timeout) { + /* Release semaphores */ + e1000_put_hw_eeprom_semaphore(hw); + DEBUGOUT("Driver can't access the Eeprom - SWESMBI bit is set.\n"); + return -E1000_ERR_EEPROM; + } + + return E1000_SUCCESS; +} + +/*************************************************************************** + * This function clears HW semaphore bits. + * + * hw: Struct containing variables accessed by shared code + * + * returns: - None. + * + ***************************************************************************/ +void +e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw) +{ + uint32_t swsm; + + DEBUGFUNC("e1000_put_hw_eeprom_semaphore"); + + if(!hw->eeprom_semaphore_present) + return; + + swsm = E1000_READ_REG(hw, SWSM); + /* Release both semaphores. */ + swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI); + E1000_WRITE_REG(hw, SWSM, swsm); +} + +/****************************************************************************** + * Checks if PHY reset is blocked due to SOL/IDER session, for example. + * Returning E1000_BLK_PHY_RESET isn't necessarily an error. But it's up to + * the caller to figure out how to deal with it. + * + * hw - Struct containing variables accessed by shared code + * + * returns: - E1000_BLK_PHY_RESET + * E1000_SUCCESS + * + *****************************************************************************/ +int32_t +e1000_check_phy_reset_block(struct e1000_hw *hw) +{ + uint32_t manc = 0; + if(hw->mac_type > e1000_82547_rev_2) + manc = E1000_READ_REG(hw, MANC); + return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ? + E1000_BLK_PHY_RESET : E1000_SUCCESS; +} + +uint8_t +e1000_arc_subsystem_valid(struct e1000_hw *hw) +{ + uint32_t fwsm; + + /* On 8257x silicon, registers in the range of 0x8800 - 0x8FFC + * may not be provided a DMA clock when no manageability features are + * enabled. We do not want to perform any reads/writes to these registers + * if this is the case. We read FWSM to determine the manageability mode. + */ + switch (hw->mac_type) { + case e1000_82573: + fwsm = E1000_READ_REG(hw, FWSM); + if((fwsm & E1000_FWSM_MODE_MASK) != 0) + return TRUE; + break; + default: + break; + } + return FALSE; +} + + + diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index f397e637a3c..1573f608fb6 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -57,6 +57,7 @@ typedef enum { e1000_82541_rev_2, e1000_82547, e1000_82547_rev_2, + e1000_82573, e1000_num_macs } e1000_mac_type; @@ -64,6 +65,7 @@ typedef enum { e1000_eeprom_uninitialized = 0, e1000_eeprom_spi, e1000_eeprom_microwire, + e1000_eeprom_flash, e1000_num_eeprom_types } e1000_eeprom_type; @@ -96,6 +98,7 @@ typedef enum { e1000_bus_type_unknown = 0, e1000_bus_type_pci, e1000_bus_type_pcix, + e1000_bus_type_pci_express, e1000_bus_type_reserved } e1000_bus_type; @@ -107,6 +110,7 @@ typedef enum { e1000_bus_speed_100, e1000_bus_speed_120, e1000_bus_speed_133, + e1000_bus_speed_2500, e1000_bus_speed_reserved } e1000_bus_speed; @@ -115,6 +119,8 @@ typedef enum { e1000_bus_width_unknown = 0, e1000_bus_width_32, e1000_bus_width_64, + e1000_bus_width_pciex_1, + e1000_bus_width_pciex_4, e1000_bus_width_reserved } e1000_bus_width; @@ -196,6 +202,7 @@ typedef enum { typedef enum { e1000_phy_m88 = 0, e1000_phy_igp, + e1000_phy_igp_2, e1000_phy_undefined = 0xFF } e1000_phy_type; @@ -242,8 +249,19 @@ struct e1000_eeprom_info { uint16_t address_bits; uint16_t delay_usec; uint16_t page_size; + boolean_t use_eerd; + boolean_t use_eewr; }; +/* Flex ASF Information */ +#define E1000_HOST_IF_MAX_SIZE 2048 + +typedef enum { + e1000_byte_align = 0, + e1000_word_align = 1, + e1000_dword_align = 2 +} e1000_align_type; + /* Error Codes */ @@ -254,11 +272,16 @@ struct e1000_eeprom_info { #define E1000_ERR_PARAM 4 #define E1000_ERR_MAC_TYPE 5 #define E1000_ERR_PHY_TYPE 6 +#define E1000_ERR_RESET 9 +#define E1000_ERR_MASTER_REQUESTS_PENDING 10 +#define E1000_ERR_HOST_INTERFACE_COMMAND 11 +#define E1000_BLK_PHY_RESET 12 /* Function prototypes */ /* Initialization */ int32_t e1000_reset_hw(struct e1000_hw *hw); int32_t e1000_init_hw(struct e1000_hw *hw); +int32_t e1000_id_led_init(struct e1000_hw * hw); int32_t e1000_set_mac_type(struct e1000_hw *hw); void e1000_set_media_type(struct e1000_hw *hw); @@ -275,7 +298,7 @@ int32_t e1000_force_mac_fc(struct e1000_hw *hw); /* PHY */ int32_t e1000_read_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *phy_data); int32_t e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t data); -void e1000_phy_hw_reset(struct e1000_hw *hw); +int32_t e1000_phy_hw_reset(struct e1000_hw *hw); int32_t e1000_phy_reset(struct e1000_hw *hw); int32_t e1000_detect_gig_phy(struct e1000_hw *hw); int32_t e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); @@ -287,13 +310,86 @@ int32_t e1000_check_downshift(struct e1000_hw *hw); int32_t e1000_validate_mdi_setting(struct e1000_hw *hw); /* EEPROM Functions */ -void e1000_init_eeprom_params(struct e1000_hw *hw); +int32_t e1000_init_eeprom_params(struct e1000_hw *hw); +boolean_t e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw); +int32_t e1000_read_eeprom_eerd(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data); +int32_t e1000_write_eeprom_eewr(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data); +int32_t e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd); + +/* MNG HOST IF functions */ +uint32_t e1000_enable_mng_pass_thru(struct e1000_hw *hw); + +#define E1000_MNG_DHCP_TX_PAYLOAD_CMD 64 +#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8 /* Host Interface data length */ + +#define E1000_MNG_DHCP_COMMAND_TIMEOUT 10 /* Time in ms to process MNG command */ +#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 /* Cookie offset */ +#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 /* Cookie length */ +#define E1000_MNG_IAMT_MODE 0x3 +#define E1000_IAMT_SIGNATURE 0x544D4149 /* Intel(R) Active Management Technology signature */ + +#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT 0x1 /* DHCP parsing enabled */ +#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT 0x2 /* DHCP parsing enabled */ +#define E1000_VFTA_ENTRY_SHIFT 0x5 +#define E1000_VFTA_ENTRY_MASK 0x7F +#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F + +struct e1000_host_mng_command_header { + uint8_t command_id; + uint8_t checksum; + uint16_t reserved1; + uint16_t reserved2; + uint16_t command_length; +}; + +struct e1000_host_mng_command_info { + struct e1000_host_mng_command_header command_header; /* Command Head/Command Result Head has 4 bytes */ + uint8_t command_data[E1000_HI_MAX_MNG_DATA_LENGTH]; /* Command data can length 0..0x658*/ +}; +#ifdef __BIG_ENDIAN +struct e1000_host_mng_dhcp_cookie{ + uint32_t signature; + uint16_t vlan_id; + uint8_t reserved0; + uint8_t status; + uint32_t reserved1; + uint8_t checksum; + uint8_t reserved3; + uint16_t reserved2; +}; +#else +struct e1000_host_mng_dhcp_cookie{ + uint32_t signature; + uint8_t status; + uint8_t reserved0; + uint16_t vlan_id; + uint32_t reserved1; + uint16_t reserved2; + uint8_t reserved3; + uint8_t checksum; +}; +#endif + +int32_t e1000_mng_write_dhcp_info(struct e1000_hw *hw, uint8_t *buffer, + uint16_t length); +boolean_t e1000_check_mng_mode(struct e1000_hw *hw); +boolean_t e1000_enable_tx_pkt_filtering(struct e1000_hw *hw); +int32_t e1000_mng_enable_host_if(struct e1000_hw *hw); +int32_t e1000_mng_host_if_write(struct e1000_hw *hw, uint8_t *buffer, + uint16_t length, uint16_t offset, uint8_t *sum); +int32_t e1000_mng_write_cmd_header(struct e1000_hw* hw, + struct e1000_host_mng_command_header* hdr); + +int32_t e1000_mng_write_commit(struct e1000_hw *hw); + int32_t e1000_read_eeprom(struct e1000_hw *hw, uint16_t reg, uint16_t words, uint16_t *data); int32_t e1000_validate_eeprom_checksum(struct e1000_hw *hw); int32_t e1000_update_eeprom_checksum(struct e1000_hw *hw); int32_t e1000_write_eeprom(struct e1000_hw *hw, uint16_t reg, uint16_t words, uint16_t *data); int32_t e1000_read_part_num(struct e1000_hw *hw, uint32_t * part_num); int32_t e1000_read_mac_addr(struct e1000_hw * hw); +int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask); +void e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask); /* Filters (multicast, vlan, receive) */ void e1000_init_rx_addrs(struct e1000_hw *hw); @@ -313,7 +409,6 @@ int32_t e1000_led_off(struct e1000_hw *hw); /* Adaptive IFS Functions */ /* Everything else */ -uint32_t e1000_enable_mng_pass_thru(struct e1000_hw *hw); void e1000_clear_hw_cntrs(struct e1000_hw *hw); void e1000_reset_adaptive(struct e1000_hw *hw); void e1000_update_adaptive(struct e1000_hw *hw); @@ -330,6 +425,19 @@ void e1000_io_write(struct e1000_hw *hw, unsigned long port, uint32_t value); void e1000_write_reg_io(struct e1000_hw *hw, uint32_t offset, uint32_t value); int32_t e1000_config_dsp_after_link_change(struct e1000_hw *hw, boolean_t link_up); int32_t e1000_set_d3_lplu_state(struct e1000_hw *hw, boolean_t active); +int32_t e1000_set_d0_lplu_state(struct e1000_hw *hw, boolean_t active); +void e1000_set_pci_express_master_disable(struct e1000_hw *hw); +void e1000_enable_pciex_master(struct e1000_hw *hw); +int32_t e1000_disable_pciex_master(struct e1000_hw *hw); +int32_t e1000_get_auto_rd_done(struct e1000_hw *hw); +int32_t e1000_get_phy_cfg_done(struct e1000_hw *hw); +int32_t e1000_get_software_semaphore(struct e1000_hw *hw); +void e1000_release_software_semaphore(struct e1000_hw *hw); +int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); +int32_t e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw); +void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw); +int32_t e1000_commit_shadow_ram(struct e1000_hw *hw); +uint8_t e1000_arc_subsystem_valid(struct e1000_hw *hw); #define E1000_READ_REG_IO(a, reg) \ e1000_read_reg_io((a), E1000_##reg) @@ -369,6 +477,10 @@ int32_t e1000_set_d3_lplu_state(struct e1000_hw *hw, boolean_t active); #define E1000_DEV_ID_82546GB_SERDES 0x107B #define E1000_DEV_ID_82546GB_PCIE 0x108A #define E1000_DEV_ID_82547EI 0x1019 +#define E1000_DEV_ID_82573E 0x108B +#define E1000_DEV_ID_82573E_IAMT 0x108C + +#define E1000_DEV_ID_82546GB_QUAD_COPPER 0x1099 #define NODE_ADDRESS_SIZE 6 #define ETH_LENGTH_OF_ADDRESS 6 @@ -381,6 +493,7 @@ int32_t e1000_set_d3_lplu_state(struct e1000_hw *hw, boolean_t active); #define E1000_REVISION_0 0 #define E1000_REVISION_1 1 #define E1000_REVISION_2 2 +#define E1000_REVISION_3 3 #define SPEED_10 10 #define SPEED_100 100 @@ -437,6 +550,7 @@ int32_t e1000_set_d3_lplu_state(struct e1000_hw *hw, boolean_t active); E1000_IMS_RXSEQ | \ E1000_IMS_LSC) + /* Number of high/low register pairs in the RAR. The RAR (Receive Address * Registers) holds the directed and multicast addresses that we monitor. We * reserve one of these spots for our directed address, allowing us room for @@ -457,14 +571,74 @@ struct e1000_rx_desc { uint16_t special; }; +/* Receive Descriptor - Extended */ +union e1000_rx_desc_extended { + struct { + uint64_t buffer_addr; + uint64_t reserved; + } read; + struct { + struct { + uint32_t mrq; /* Multiple Rx Queues */ + union { + uint32_t rss; /* RSS Hash */ + struct { + uint16_t ip_id; /* IP id */ + uint16_t csum; /* Packet Checksum */ + } csum_ip; + } hi_dword; + } lower; + struct { + uint32_t status_error; /* ext status/error */ + uint16_t length; + uint16_t vlan; /* VLAN tag */ + } upper; + } wb; /* writeback */ +}; + +#define MAX_PS_BUFFERS 4 +/* Receive Descriptor - Packet Split */ +union e1000_rx_desc_packet_split { + struct { + /* one buffer for protocol header(s), three data buffers */ + uint64_t buffer_addr[MAX_PS_BUFFERS]; + } read; + struct { + struct { + uint32_t mrq; /* Multiple Rx Queues */ + union { + uint32_t rss; /* RSS Hash */ + struct { + uint16_t ip_id; /* IP id */ + uint16_t csum; /* Packet Checksum */ + } csum_ip; + } hi_dword; + } lower; + struct { + uint32_t status_error; /* ext status/error */ + uint16_t length0; /* length of buffer 0 */ + uint16_t vlan; /* VLAN tag */ + } middle; + struct { + uint16_t header_status; + uint16_t length[3]; /* length of buffers 1-3 */ + } upper; + uint64_t reserved; + } wb; /* writeback */ +}; + /* Receive Decriptor bit definitions */ #define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */ #define E1000_RXD_STAT_EOP 0x02 /* End of Packet */ #define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */ #define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */ +#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum caculated */ #define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */ #define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */ #define E1000_RXD_STAT_PIF 0x80 /* passed in-exact filter */ +#define E1000_RXD_STAT_IPIDV 0x200 /* IP identification valid */ +#define E1000_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */ +#define E1000_RXD_STAT_ACK 0x8000 /* ACK Packet indication */ #define E1000_RXD_ERR_CE 0x01 /* CRC Error */ #define E1000_RXD_ERR_SE 0x02 /* Symbol Error */ #define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */ @@ -474,9 +648,20 @@ struct e1000_rx_desc { #define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */ #define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */ #define E1000_RXD_SPC_PRI_MASK 0xE000 /* Priority is in upper 3 bits */ -#define E1000_RXD_SPC_PRI_SHIFT 0x000D /* Priority is in upper 3 of 16 */ +#define E1000_RXD_SPC_PRI_SHIFT 13 #define E1000_RXD_SPC_CFI_MASK 0x1000 /* CFI is bit 12 */ -#define E1000_RXD_SPC_CFI_SHIFT 0x000C /* CFI is bit 12 */ +#define E1000_RXD_SPC_CFI_SHIFT 12 + +#define E1000_RXDEXT_STATERR_CE 0x01000000 +#define E1000_RXDEXT_STATERR_SE 0x02000000 +#define E1000_RXDEXT_STATERR_SEQ 0x04000000 +#define E1000_RXDEXT_STATERR_CXE 0x10000000 +#define E1000_RXDEXT_STATERR_TCPE 0x20000000 +#define E1000_RXDEXT_STATERR_IPE 0x40000000 +#define E1000_RXDEXT_STATERR_RXE 0x80000000 + +#define E1000_RXDPS_HDRSTAT_HDRSP 0x00008000 +#define E1000_RXDPS_HDRSTAT_HDRLEN_MASK 0x000003FF /* mask to determine if packets should be dropped due to frame errors */ #define E1000_RXD_ERR_FRAME_ERR_MASK ( \ @@ -486,6 +671,15 @@ struct e1000_rx_desc { E1000_RXD_ERR_CXE | \ E1000_RXD_ERR_RXE) + +/* Same mask, but for extended and packet split descriptors */ +#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \ + E1000_RXDEXT_STATERR_CE | \ + E1000_RXDEXT_STATERR_SE | \ + E1000_RXDEXT_STATERR_SEQ | \ + E1000_RXDEXT_STATERR_CXE | \ + E1000_RXDEXT_STATERR_RXE) + /* Transmit Descriptor */ struct e1000_tx_desc { uint64_t buffer_addr; /* Address of the descriptor's data buffer */ @@ -667,6 +861,7 @@ struct e1000_ffvt_entry { #define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */ #define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */ #define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */ +#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */ #define E1000_RCTL 0x00100 /* RX Control - RW */ #define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */ #define E1000_TXCW 0x00178 /* TX Configuration Word - RW */ @@ -676,9 +871,23 @@ struct e1000_ffvt_entry { #define E1000_TBT 0x00448 /* TX Burst Timer - RW */ #define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */ #define E1000_LEDCTL 0x00E00 /* LED Control - RW */ +#define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */ +#define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */ #define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */ +#define E1000_PBS 0x01008 /* Packet Buffer Size */ +#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */ +#define E1000_FLASH_UPDATES 1000 +#define E1000_EEARBC 0x01024 /* EEPROM Auto Read Bus Control */ +#define E1000_FLASHT 0x01028 /* FLASH Timer Register */ +#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */ +#define E1000_FLSWCTL 0x01030 /* FLASH control register */ +#define E1000_FLSWDATA 0x01034 /* FLASH data register */ +#define E1000_FLSWCNT 0x01038 /* FLASH Access Counter */ +#define E1000_FLOP 0x0103C /* FLASH Opcode Register */ +#define E1000_ERT 0x02008 /* Early Rx Threshold - RW */ #define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */ #define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */ +#define E1000_PSRCTL 0x02170 /* Packet Split Receive Control - RW */ #define E1000_RDBAL 0x02800 /* RX Descriptor Base Address Low - RW */ #define E1000_RDBAH 0x02804 /* RX Descriptor Base Address High - RW */ #define E1000_RDLEN 0x02808 /* RX Descriptor Length - RW */ @@ -688,6 +897,7 @@ struct e1000_ffvt_entry { #define E1000_RXDCTL 0x02828 /* RX Descriptor Control - RW */ #define E1000_RADV 0x0282C /* RX Interrupt Absolute Delay Timer - RW */ #define E1000_RSRPD 0x02C00 /* RX Small Packet Detect - RW */ +#define E1000_RAID 0x02C08 /* Receive Ack Interrupt Delay - RW */ #define E1000_TXDMAC 0x03000 /* TX DMA Control - RW */ #define E1000_TDFH 0x03410 /* TX Data FIFO Head - RW */ #define E1000_TDFT 0x03418 /* TX Data FIFO Tail - RW */ @@ -703,6 +913,14 @@ struct e1000_ffvt_entry { #define E1000_TXDCTL 0x03828 /* TX Descriptor Control - RW */ #define E1000_TADV 0x0382C /* TX Interrupt Absolute Delay Val - RW */ #define E1000_TSPMT 0x03830 /* TCP Segmentation PAD & Min Threshold - RW */ +#define E1000_TARC0 0x03840 /* TX Arbitration Count (0) */ +#define E1000_TDBAL1 0x03900 /* TX Desc Base Address Low (1) - RW */ +#define E1000_TDBAH1 0x03904 /* TX Desc Base Address High (1) - RW */ +#define E1000_TDLEN1 0x03908 /* TX Desc Length (1) - RW */ +#define E1000_TDH1 0x03910 /* TX Desc Head (1) - RW */ +#define E1000_TDT1 0x03918 /* TX Desc Tail (1) - RW */ +#define E1000_TXDCTL1 0x03928 /* TX Descriptor Control (1) - RW */ +#define E1000_TARC1 0x03940 /* TX Arbitration Count (1) */ #define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */ #define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */ #define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */ @@ -761,7 +979,17 @@ struct e1000_ffvt_entry { #define E1000_BPTC 0x040F4 /* Broadcast Packets TX Count - R/clr */ #define E1000_TSCTC 0x040F8 /* TCP Segmentation Context TX - R/clr */ #define E1000_TSCTFC 0x040FC /* TCP Segmentation Context TX Fail - R/clr */ +#define E1000_IAC 0x4100 /* Interrupt Assertion Count */ +#define E1000_ICRXPTC 0x4104 /* Interrupt Cause Rx Packet Timer Expire Count */ +#define E1000_ICRXATC 0x4108 /* Interrupt Cause Rx Absolute Timer Expire Count */ +#define E1000_ICTXPTC 0x410C /* Interrupt Cause Tx Packet Timer Expire Count */ +#define E1000_ICTXATC 0x4110 /* Interrupt Cause Tx Absolute Timer Expire Count */ +#define E1000_ICTXQEC 0x4118 /* Interrupt Cause Tx Queue Empty Count */ +#define E1000_ICTXQMTC 0x411C /* Interrupt Cause Tx Queue Minimum Threshold Count */ +#define E1000_ICRXDMTC 0x4120 /* Interrupt Cause Rx Descriptor Minimum Threshold Count */ +#define E1000_ICRXOC 0x4124 /* Interrupt Cause Receiver Overrun Count */ #define E1000_RXCSUM 0x05000 /* RX Checksum Control - RW */ +#define E1000_RFCTL 0x05008 /* Receive Filter Control*/ #define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */ #define E1000_RA 0x05400 /* Receive Address - RW Array */ #define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */ @@ -779,6 +1007,16 @@ struct e1000_ffvt_entry { #define E1000_FFMT 0x09000 /* Flexible Filter Mask Table - RW Array */ #define E1000_FFVT 0x09800 /* Flexible Filter Value Table - RW Array */ +#define E1000_GCR 0x05B00 /* PCI-Ex Control */ +#define E1000_GSCL_1 0x05B10 /* PCI-Ex Statistic Control #1 */ +#define E1000_GSCL_2 0x05B14 /* PCI-Ex Statistic Control #2 */ +#define E1000_GSCL_3 0x05B18 /* PCI-Ex Statistic Control #3 */ +#define E1000_GSCL_4 0x05B1C /* PCI-Ex Statistic Control #4 */ +#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */ +#define E1000_SWSM 0x05B50 /* SW Semaphore */ +#define E1000_FWSM 0x05B54 /* FW Semaphore */ +#define E1000_FFLT_DBG 0x05F04 /* Debug Register */ +#define E1000_HICR 0x08F00 /* Host Inteface Control */ /* Register Set (82542) * * Some of the 82542 registers are located at different offsets than they are @@ -829,6 +1067,18 @@ struct e1000_ffvt_entry { #define E1000_82542_VFTA 0x00600 #define E1000_82542_LEDCTL E1000_LEDCTL #define E1000_82542_PBA E1000_PBA +#define E1000_82542_PBS E1000_PBS +#define E1000_82542_EEMNGCTL E1000_EEMNGCTL +#define E1000_82542_EEARBC E1000_EEARBC +#define E1000_82542_FLASHT E1000_FLASHT +#define E1000_82542_EEWR E1000_EEWR +#define E1000_82542_FLSWCTL E1000_FLSWCTL +#define E1000_82542_FLSWDATA E1000_FLSWDATA +#define E1000_82542_FLSWCNT E1000_FLSWCNT +#define E1000_82542_FLOP E1000_FLOP +#define E1000_82542_EXTCNF_CTRL E1000_EXTCNF_CTRL +#define E1000_82542_EXTCNF_SIZE E1000_EXTCNF_SIZE +#define E1000_82542_ERT E1000_ERT #define E1000_82542_RXDCTL E1000_RXDCTL #define E1000_82542_RADV E1000_RADV #define E1000_82542_RSRPD E1000_RSRPD @@ -913,6 +1163,38 @@ struct e1000_ffvt_entry { #define E1000_82542_FFMT E1000_FFMT #define E1000_82542_FFVT E1000_FFVT #define E1000_82542_HOST_IF E1000_HOST_IF +#define E1000_82542_IAM E1000_IAM +#define E1000_82542_EEMNGCTL E1000_EEMNGCTL +#define E1000_82542_PSRCTL E1000_PSRCTL +#define E1000_82542_RAID E1000_RAID +#define E1000_82542_TARC0 E1000_TARC0 +#define E1000_82542_TDBAL1 E1000_TDBAL1 +#define E1000_82542_TDBAH1 E1000_TDBAH1 +#define E1000_82542_TDLEN1 E1000_TDLEN1 +#define E1000_82542_TDH1 E1000_TDH1 +#define E1000_82542_TDT1 E1000_TDT1 +#define E1000_82542_TXDCTL1 E1000_TXDCTL1 +#define E1000_82542_TARC1 E1000_TARC1 +#define E1000_82542_RFCTL E1000_RFCTL +#define E1000_82542_GCR E1000_GCR +#define E1000_82542_GSCL_1 E1000_GSCL_1 +#define E1000_82542_GSCL_2 E1000_GSCL_2 +#define E1000_82542_GSCL_3 E1000_GSCL_3 +#define E1000_82542_GSCL_4 E1000_GSCL_4 +#define E1000_82542_FACTPS E1000_FACTPS +#define E1000_82542_SWSM E1000_SWSM +#define E1000_82542_FWSM E1000_FWSM +#define E1000_82542_FFLT_DBG E1000_FFLT_DBG +#define E1000_82542_IAC E1000_IAC +#define E1000_82542_ICRXPTC E1000_ICRXPTC +#define E1000_82542_ICRXATC E1000_ICRXATC +#define E1000_82542_ICTXPTC E1000_ICTXPTC +#define E1000_82542_ICTXATC E1000_ICTXATC +#define E1000_82542_ICTXQEC E1000_ICTXQEC +#define E1000_82542_ICTXQMTC E1000_ICTXQMTC +#define E1000_82542_ICRXDMTC E1000_ICRXDMTC +#define E1000_82542_ICRXOC E1000_ICRXOC +#define E1000_82542_HICR E1000_HICR /* Statistics counters collected by the MAC */ struct e1000_hw_stats { @@ -974,11 +1256,21 @@ struct e1000_hw_stats { uint64_t bptc; uint64_t tsctc; uint64_t tsctfc; + uint64_t iac; + uint64_t icrxptc; + uint64_t icrxatc; + uint64_t ictxptc; + uint64_t ictxatc; + uint64_t ictxqec; + uint64_t ictxqmtc; + uint64_t icrxdmtc; + uint64_t icrxoc; }; /* Structure containing variables used by the shared code (e1000_hw.c) */ struct e1000_hw { - uint8_t __iomem *hw_addr; + uint8_t *hw_addr; + uint8_t *flash_address; e1000_mac_type mac_type; e1000_phy_type phy_type; uint32_t phy_init_script; @@ -993,6 +1285,7 @@ struct e1000_hw { e1000_ms_type original_master_slave; e1000_ffe_config ffe_config_state; uint32_t asf_firmware_present; + uint32_t eeprom_semaphore_present; unsigned long io_base; uint32_t phy_id; uint32_t phy_revision; @@ -1009,6 +1302,8 @@ struct e1000_hw { uint32_t ledctl_default; uint32_t ledctl_mode1; uint32_t ledctl_mode2; + boolean_t tx_pkt_filtering; + struct e1000_host_mng_dhcp_cookie mng_cookie; uint16_t phy_spd_default; uint16_t autoneg_advertised; uint16_t pci_cmd_word; @@ -1047,16 +1342,24 @@ struct e1000_hw { boolean_t adaptive_ifs; boolean_t ifs_params_forced; boolean_t in_ifs_mode; + boolean_t mng_reg_access_disabled; }; #define E1000_EEPROM_SWDPIN0 0x0001 /* SWDPIN 0 EEPROM Value */ #define E1000_EEPROM_LED_LOGIC 0x0020 /* Led Logic Word */ +#define E1000_EEPROM_RW_REG_DATA 16 /* Offset to data in EEPROM read/write registers */ +#define E1000_EEPROM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */ +#define E1000_EEPROM_RW_REG_START 1 /* First bit for telling part to start operation */ +#define E1000_EEPROM_RW_ADDR_SHIFT 2 /* Shift to the address bits */ +#define E1000_EEPROM_POLL_WRITE 1 /* Flag for polling for write complete */ +#define E1000_EEPROM_POLL_READ 0 /* Flag for polling for read complete */ /* Register Bit Masks */ /* Device Control */ #define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */ #define E1000_CTRL_BEM 0x00000002 /* Endian Mode.0=little,1=big */ #define E1000_CTRL_PRIOR 0x00000004 /* Priority on PCI. 0=rx,1=fair */ +#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */ #define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */ #define E1000_CTRL_TME 0x00000010 /* Test mode. 0=normal,1=test */ #define E1000_CTRL_SLE 0x00000020 /* Serial Link on 0=dis,1=en */ @@ -1070,6 +1373,7 @@ struct e1000_hw { #define E1000_CTRL_BEM32 0x00000400 /* Big Endian 32 mode */ #define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */ #define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */ +#define E1000_CTRL_D_UD_POLARITY 0x00004000 /* Defined polarity of Dock/Undock indication in SDP[0] */ #define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */ #define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */ #define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */ @@ -1089,6 +1393,7 @@ struct e1000_hw { #define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */ #define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */ #define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */ +#define E1000_STATUS_FUNC_SHIFT 2 #define E1000_STATUS_FUNC_0 0x00000000 /* Function 0 */ #define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */ #define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */ @@ -1098,6 +1403,8 @@ struct e1000_hw { #define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */ #define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */ #define E1000_STATUS_ASDV 0x00000300 /* Auto speed detect value */ +#define E1000_STATUS_DOCK_CI 0x00000800 /* Change in Dock/Undock state. Clear on write '0'. */ +#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */ #define E1000_STATUS_MTXCKOK 0x00000400 /* MTX clock running OK */ #define E1000_STATUS_PCI66 0x00000800 /* In 66Mhz slot */ #define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */ @@ -1128,6 +1435,18 @@ struct e1000_hw { #ifndef E1000_EEPROM_GRANT_ATTEMPTS #define E1000_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */ #endif +#define E1000_EECD_AUTO_RD 0x00000200 /* EEPROM Auto Read done */ +#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* EEprom Size */ +#define E1000_EECD_SIZE_EX_SHIFT 11 +#define E1000_EECD_NVADDS 0x00018000 /* NVM Address Size */ +#define E1000_EECD_SELSHAD 0x00020000 /* Select Shadow RAM */ +#define E1000_EECD_INITSRAM 0x00040000 /* Initialize Shadow RAM */ +#define E1000_EECD_FLUPD 0x00080000 /* Update FLASH */ +#define E1000_EECD_AUPDEN 0x00100000 /* Enable Autonomous FLASH update */ +#define E1000_EECD_SHADV 0x00200000 /* Shadow RAM Data Valid */ +#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */ +#define E1000_STM_OPCODE 0xDB00 +#define E1000_HICR_FW_RESET 0xC0 /* EEPROM Read */ #define E1000_EERD_START 0x00000001 /* Start Read */ @@ -1171,6 +1490,8 @@ struct e1000_hw { #define E1000_CTRL_EXT_WR_WMARK_320 0x01000000 #define E1000_CTRL_EXT_WR_WMARK_384 0x02000000 #define E1000_CTRL_EXT_WR_WMARK_448 0x03000000 +#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */ +#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */ /* MDI Control */ #define E1000_MDIC_DATA_MASK 0x0000FFFF @@ -1187,14 +1508,17 @@ struct e1000_hw { /* LED Control */ #define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F #define E1000_LEDCTL_LED0_MODE_SHIFT 0 +#define E1000_LEDCTL_LED0_BLINK_RATE 0x0000020 #define E1000_LEDCTL_LED0_IVRT 0x00000040 #define E1000_LEDCTL_LED0_BLINK 0x00000080 #define E1000_LEDCTL_LED1_MODE_MASK 0x00000F00 #define E1000_LEDCTL_LED1_MODE_SHIFT 8 +#define E1000_LEDCTL_LED1_BLINK_RATE 0x0002000 #define E1000_LEDCTL_LED1_IVRT 0x00004000 #define E1000_LEDCTL_LED1_BLINK 0x00008000 #define E1000_LEDCTL_LED2_MODE_MASK 0x000F0000 #define E1000_LEDCTL_LED2_MODE_SHIFT 16 +#define E1000_LEDCTL_LED2_BLINK_RATE 0x00200000 #define E1000_LEDCTL_LED2_IVRT 0x00400000 #define E1000_LEDCTL_LED2_BLINK 0x00800000 #define E1000_LEDCTL_LED3_MODE_MASK 0x0F000000 @@ -1238,6 +1562,10 @@ struct e1000_hw { #define E1000_ICR_GPI_EN3 0x00004000 /* GP Int 3 */ #define E1000_ICR_TXD_LOW 0x00008000 #define E1000_ICR_SRPD 0x00010000 +#define E1000_ICR_ACK 0x00020000 /* Receive Ack frame */ +#define E1000_ICR_MNG 0x00040000 /* Manageability event */ +#define E1000_ICR_DOCK 0x00080000 /* Dock/Undock */ +#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */ /* Interrupt Cause Set */ #define E1000_ICS_TXDW E1000_ICR_TXDW /* Transmit desc written back */ @@ -1255,6 +1583,9 @@ struct e1000_hw { #define E1000_ICS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */ #define E1000_ICS_TXD_LOW E1000_ICR_TXD_LOW #define E1000_ICS_SRPD E1000_ICR_SRPD +#define E1000_ICS_ACK E1000_ICR_ACK /* Receive Ack frame */ +#define E1000_ICS_MNG E1000_ICR_MNG /* Manageability event */ +#define E1000_ICS_DOCK E1000_ICR_DOCK /* Dock/Undock */ /* Interrupt Mask Set */ #define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */ @@ -1272,6 +1603,9 @@ struct e1000_hw { #define E1000_IMS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */ #define E1000_IMS_TXD_LOW E1000_ICR_TXD_LOW #define E1000_IMS_SRPD E1000_ICR_SRPD +#define E1000_IMS_ACK E1000_ICR_ACK /* Receive Ack frame */ +#define E1000_IMS_MNG E1000_ICR_MNG /* Manageability event */ +#define E1000_IMS_DOCK E1000_ICR_DOCK /* Dock/Undock */ /* Interrupt Mask Clear */ #define E1000_IMC_TXDW E1000_ICR_TXDW /* Transmit desc written back */ @@ -1289,6 +1623,9 @@ struct e1000_hw { #define E1000_IMC_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */ #define E1000_IMC_TXD_LOW E1000_ICR_TXD_LOW #define E1000_IMC_SRPD E1000_ICR_SRPD +#define E1000_IMC_ACK E1000_ICR_ACK /* Receive Ack frame */ +#define E1000_IMC_MNG E1000_ICR_MNG /* Manageability event */ +#define E1000_IMC_DOCK E1000_ICR_DOCK /* Dock/Undock */ /* Receive Control */ #define E1000_RCTL_RST 0x00000001 /* Software reset */ @@ -1301,6 +1638,8 @@ struct e1000_hw { #define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */ #define E1000_RCTL_LBM_SLP 0x00000080 /* serial link loopback mode */ #define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */ +#define E1000_RCTL_DTYP_MASK 0x00000C00 /* Descriptor type mask */ +#define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */ #define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min threshold size */ #define E1000_RCTL_RDMTS_QUAT 0x00000100 /* rx desc min threshold size */ #define E1000_RCTL_RDMTS_EIGTH 0x00000200 /* rx desc min threshold size */ @@ -1327,6 +1666,34 @@ struct e1000_hw { #define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */ #define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */ #define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */ +#define E1000_RCTL_FLXBUF_MASK 0x78000000 /* Flexible buffer size */ +#define E1000_RCTL_FLXBUF_SHIFT 27 /* Flexible buffer shift */ + +/* Use byte values for the following shift parameters + * Usage: + * psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) & + * E1000_PSRCTL_BSIZE0_MASK) | + * ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) & + * E1000_PSRCTL_BSIZE1_MASK) | + * ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) & + * E1000_PSRCTL_BSIZE2_MASK) | + * ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |; + * E1000_PSRCTL_BSIZE3_MASK)) + * where value0 = [128..16256], default=256 + * value1 = [1024..64512], default=4096 + * value2 = [0..64512], default=4096 + * value3 = [0..64512], default=0 + */ + +#define E1000_PSRCTL_BSIZE0_MASK 0x0000007F +#define E1000_PSRCTL_BSIZE1_MASK 0x00003F00 +#define E1000_PSRCTL_BSIZE2_MASK 0x003F0000 +#define E1000_PSRCTL_BSIZE3_MASK 0x3F000000 + +#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */ +#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */ +#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */ +#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */ /* Receive Descriptor */ #define E1000_RDT_DELAY 0x0000ffff /* Delay timer (1=1024us) */ @@ -1341,6 +1708,23 @@ struct e1000_hw { #define E1000_FCRTL_RTL 0x0000FFF8 /* Mask Bits[15:3] for RTL */ #define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */ +/* Header split receive */ +#define E1000_RFCTL_ISCSI_DIS 0x00000001 +#define E1000_RFCTL_ISCSI_DWC_MASK 0x0000003E +#define E1000_RFCTL_ISCSI_DWC_SHIFT 1 +#define E1000_RFCTL_NFSW_DIS 0x00000040 +#define E1000_RFCTL_NFSR_DIS 0x00000080 +#define E1000_RFCTL_NFS_VER_MASK 0x00000300 +#define E1000_RFCTL_NFS_VER_SHIFT 8 +#define E1000_RFCTL_IPV6_DIS 0x00000400 +#define E1000_RFCTL_IPV6_XSUM_DIS 0x00000800 +#define E1000_RFCTL_ACK_DIS 0x00001000 +#define E1000_RFCTL_ACKD_DIS 0x00002000 +#define E1000_RFCTL_IPFRSP_DIS 0x00004000 +#define E1000_RFCTL_EXTEN 0x00008000 +#define E1000_RFCTL_IPV6_EX_DIS 0x00010000 +#define E1000_RFCTL_NEW_IPV6_EXT_DIS 0x00020000 + /* Receive Descriptor Control */ #define E1000_RXDCTL_PTHRESH 0x0000003F /* RXDCTL Prefetch Threshold */ #define E1000_RXDCTL_HTHRESH 0x00003F00 /* RXDCTL Host Threshold */ @@ -1354,6 +1738,8 @@ struct e1000_hw { #define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */ #define E1000_TXDCTL_LWTHRESH 0xFE000000 /* TXDCTL Low Threshold */ #define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */ +#define E1000_TXDCTL_COUNT_DESC 0x00400000 /* Enable the counting of desc. + still to be processed. */ /* Transmit Configuration Word */ #define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */ @@ -1387,12 +1773,16 @@ struct e1000_hw { #define E1000_TCTL_PBE 0x00800000 /* Packet Burst Enable */ #define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */ #define E1000_TCTL_NRTU 0x02000000 /* No Re-transmit on underrun */ +#define E1000_TCTL_MULR 0x10000000 /* Multiple request support */ /* Receive Checksum Control */ #define E1000_RXCSUM_PCSS_MASK 0x000000FF /* Packet Checksum Start */ #define E1000_RXCSUM_IPOFL 0x00000100 /* IPv4 checksum offload */ #define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */ #define E1000_RXCSUM_IPV6OFL 0x00000400 /* IPv6 checksum offload */ +#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */ +#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */ + /* Definitions for power management and wakeup registers */ /* Wake Up Control */ @@ -1411,6 +1801,7 @@ struct e1000_hw { #define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */ #define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */ #define E1000_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */ +#define E1000_WUFC_IGNORE_TCO 0x00008000 /* Ignore WakeOn TCO packets */ #define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */ #define E1000_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */ #define E1000_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */ @@ -1446,13 +1837,19 @@ struct e1000_hw { #define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */ #define E1000_MANC_NEIGHBOR_EN 0x00004000 /* Enable Neighbor Discovery * Filtering */ +#define E1000_MANC_ARP_RES_EN 0x00008000 /* Enable ARP response Filtering */ #define E1000_MANC_TCO_RESET 0x00010000 /* TCO Reset Occurred */ #define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */ #define E1000_MANC_REPORT_STATUS 0x00040000 /* Status Reporting Enabled */ +#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */ #define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000 /* Enable MAC address * filtering */ #define E1000_MANC_EN_MNG2HOST 0x00200000 /* Enable MNG packets to host * memory */ +#define E1000_MANC_EN_IP_ADDR_FILTER 0x00400000 /* Enable IP address + * filtering */ +#define E1000_MANC_EN_XSUM_FILTER 0x00800000 /* Enable checksum filtering */ +#define E1000_MANC_BR_EN 0x01000000 /* Enable broadcast filtering */ #define E1000_MANC_SMB_REQ 0x01000000 /* SMBus Request */ #define E1000_MANC_SMB_GNT 0x02000000 /* SMBus Grant */ #define E1000_MANC_SMB_CLK_IN 0x04000000 /* SMBus Clock In */ @@ -1463,11 +1860,97 @@ struct e1000_hw { #define E1000_MANC_SMB_DATA_OUT_SHIFT 28 /* SMBus Data Out Shift */ #define E1000_MANC_SMB_CLK_OUT_SHIFT 29 /* SMBus Clock Out Shift */ +/* SW Semaphore Register */ +#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */ +#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */ +#define E1000_SWSM_WMNG 0x00000004 /* Wake MNG Clock */ +#define E1000_SWSM_DRV_LOAD 0x00000008 /* Driver Loaded Bit */ + +/* FW Semaphore Register */ +#define E1000_FWSM_MODE_MASK 0x0000000E /* FW mode */ +#define E1000_FWSM_MODE_SHIFT 1 +#define E1000_FWSM_FW_VALID 0x00008000 /* FW established a valid mode */ + +/* FFLT Debug Register */ +#define E1000_FFLT_DBG_INVC 0x00100000 /* Invalid /C/ code handling */ + +typedef enum { + e1000_mng_mode_none = 0, + e1000_mng_mode_asf, + e1000_mng_mode_pt, + e1000_mng_mode_ipmi, + e1000_mng_mode_host_interface_only +} e1000_mng_mode; + +/* Host Inteface Control Register */ +#define E1000_HICR_EN 0x00000001 /* Enable Bit - RO */ +#define E1000_HICR_C 0x00000002 /* Driver sets this bit when done + * to put command in RAM */ +#define E1000_HICR_SV 0x00000004 /* Status Validity */ +#define E1000_HICR_FWR 0x00000080 /* FW reset. Set by the Host */ + +/* Host Interface Command Interface - Address range 0x8800-0x8EFF */ +#define E1000_HI_MAX_DATA_LENGTH 252 /* Host Interface data length */ +#define E1000_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Number of bytes in range */ +#define E1000_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Number of dwords in range */ +#define E1000_HI_COMMAND_TIMEOUT 500 /* Time in ms to process HI command */ + +struct e1000_host_command_header { + uint8_t command_id; + uint8_t command_length; + uint8_t command_options; /* I/F bits for command, status for return */ + uint8_t checksum; +}; +struct e1000_host_command_info { + struct e1000_host_command_header command_header; /* Command Head/Command Result Head has 4 bytes */ + uint8_t command_data[E1000_HI_MAX_DATA_LENGTH]; /* Command data can length 0..252 */ +}; + +/* Host SMB register #0 */ +#define E1000_HSMC0R_CLKIN 0x00000001 /* SMB Clock in */ +#define E1000_HSMC0R_DATAIN 0x00000002 /* SMB Data in */ +#define E1000_HSMC0R_DATAOUT 0x00000004 /* SMB Data out */ +#define E1000_HSMC0R_CLKOUT 0x00000008 /* SMB Clock out */ + +/* Host SMB register #1 */ +#define E1000_HSMC1R_CLKIN E1000_HSMC0R_CLKIN +#define E1000_HSMC1R_DATAIN E1000_HSMC0R_DATAIN +#define E1000_HSMC1R_DATAOUT E1000_HSMC0R_DATAOUT +#define E1000_HSMC1R_CLKOUT E1000_HSMC0R_CLKOUT + +/* FW Status Register */ +#define E1000_FWSTS_FWS_MASK 0x000000FF /* FW Status */ + /* Wake Up Packet Length */ #define E1000_WUPL_LENGTH_MASK 0x0FFF /* Only the lower 12 bits are valid */ #define E1000_MDALIGN 4096 +#define E1000_GCR_BEM32 0x00400000 +/* Function Active and Power State to MNG */ +#define E1000_FACTPS_FUNC0_POWER_STATE_MASK 0x00000003 +#define E1000_FACTPS_LAN0_VALID 0x00000004 +#define E1000_FACTPS_FUNC0_AUX_EN 0x00000008 +#define E1000_FACTPS_FUNC1_POWER_STATE_MASK 0x000000C0 +#define E1000_FACTPS_FUNC1_POWER_STATE_SHIFT 6 +#define E1000_FACTPS_LAN1_VALID 0x00000100 +#define E1000_FACTPS_FUNC1_AUX_EN 0x00000200 +#define E1000_FACTPS_FUNC2_POWER_STATE_MASK 0x00003000 +#define E1000_FACTPS_FUNC2_POWER_STATE_SHIFT 12 +#define E1000_FACTPS_IDE_ENABLE 0x00004000 +#define E1000_FACTPS_FUNC2_AUX_EN 0x00008000 +#define E1000_FACTPS_FUNC3_POWER_STATE_MASK 0x000C0000 +#define E1000_FACTPS_FUNC3_POWER_STATE_SHIFT 18 +#define E1000_FACTPS_SP_ENABLE 0x00100000 +#define E1000_FACTPS_FUNC3_AUX_EN 0x00200000 +#define E1000_FACTPS_FUNC4_POWER_STATE_MASK 0x03000000 +#define E1000_FACTPS_FUNC4_POWER_STATE_SHIFT 24 +#define E1000_FACTPS_IPMI_ENABLE 0x04000000 +#define E1000_FACTPS_FUNC4_AUX_EN 0x08000000 +#define E1000_FACTPS_MNGCG 0x20000000 +#define E1000_FACTPS_LAN_FUNC_SEL 0x40000000 +#define E1000_FACTPS_PM_STATE_CHANGED 0x80000000 + /* EEPROM Commands - Microwire */ #define EEPROM_READ_OPCODE_MICROWIRE 0x6 /* EEPROM read opcode */ #define EEPROM_WRITE_OPCODE_MICROWIRE 0x5 /* EEPROM write opcode */ @@ -1477,22 +1960,20 @@ struct e1000_hw { /* EEPROM Commands - SPI */ #define EEPROM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */ -#define EEPROM_READ_OPCODE_SPI 0x3 /* EEPROM read opcode */ -#define EEPROM_WRITE_OPCODE_SPI 0x2 /* EEPROM write opcode */ -#define EEPROM_A8_OPCODE_SPI 0x8 /* opcode bit-3 = address bit-8 */ -#define EEPROM_WREN_OPCODE_SPI 0x6 /* EEPROM set Write Enable latch */ -#define EEPROM_WRDI_OPCODE_SPI 0x4 /* EEPROM reset Write Enable latch */ -#define EEPROM_RDSR_OPCODE_SPI 0x5 /* EEPROM read Status register */ -#define EEPROM_WRSR_OPCODE_SPI 0x1 /* EEPROM write Status register */ +#define EEPROM_READ_OPCODE_SPI 0x03 /* EEPROM read opcode */ +#define EEPROM_WRITE_OPCODE_SPI 0x02 /* EEPROM write opcode */ +#define EEPROM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */ +#define EEPROM_WREN_OPCODE_SPI 0x06 /* EEPROM set Write Enable latch */ +#define EEPROM_WRDI_OPCODE_SPI 0x04 /* EEPROM reset Write Enable latch */ +#define EEPROM_RDSR_OPCODE_SPI 0x05 /* EEPROM read Status register */ +#define EEPROM_WRSR_OPCODE_SPI 0x01 /* EEPROM write Status register */ +#define EEPROM_ERASE4K_OPCODE_SPI 0x20 /* EEPROM ERASE 4KB */ +#define EEPROM_ERASE64K_OPCODE_SPI 0xD8 /* EEPROM ERASE 64KB */ +#define EEPROM_ERASE256_OPCODE_SPI 0xDB /* EEPROM ERASE 256B */ /* EEPROM Size definitions */ -#define EEPROM_SIZE_16KB 0x1800 -#define EEPROM_SIZE_8KB 0x1400 -#define EEPROM_SIZE_4KB 0x1000 -#define EEPROM_SIZE_2KB 0x0C00 -#define EEPROM_SIZE_1KB 0x0800 -#define EEPROM_SIZE_512B 0x0400 -#define EEPROM_SIZE_128B 0x0000 +#define EEPROM_WORD_SIZE_SHIFT 6 +#define EEPROM_SIZE_SHIFT 10 #define EEPROM_SIZE_MASK 0x1C00 /* EEPROM Word Offsets */ @@ -1606,7 +2087,22 @@ struct e1000_hw { #define IFS_MIN 40 #define IFS_RATIO 4 +/* Extended Configuration Control and Size */ +#define E1000_EXTCNF_CTRL_PCIE_WRITE_ENABLE 0x00000001 +#define E1000_EXTCNF_CTRL_PHY_WRITE_ENABLE 0x00000002 +#define E1000_EXTCNF_CTRL_D_UD_ENABLE 0x00000004 +#define E1000_EXTCNF_CTRL_D_UD_LATENCY 0x00000008 +#define E1000_EXTCNF_CTRL_D_UD_OWNER 0x00000010 +#define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020 +#define E1000_EXTCNF_CTRL_MDIO_HW_OWNERSHIP 0x00000040 +#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER 0x1FFF0000 + +#define E1000_EXTCNF_SIZE_EXT_PHY_LENGTH 0x000000FF +#define E1000_EXTCNF_SIZE_EXT_DOCK_LENGTH 0x0000FF00 +#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH 0x00FF0000 + /* PBA constants */ +#define E1000_PBA_12K 0x000C /* 12KB, default Rx allocation */ #define E1000_PBA_16K 0x0010 /* 16KB, default TX allocation */ #define E1000_PBA_22K 0x0016 #define E1000_PBA_24K 0x0018 @@ -1663,6 +2159,13 @@ struct e1000_hw { /* Number of milliseconds we wait for auto-negotiation to complete */ #define LINK_UP_TIMEOUT 500 +/* Number of 100 microseconds we wait for PCI Express master disable */ +#define MASTER_DISABLE_TIMEOUT 800 +/* Number of milliseconds we wait for Eeprom auto read bit done after MAC reset */ +#define AUTO_READ_DONE_TIMEOUT 10 +/* Number of milliseconds we wait for PHY configuration done after MAC reset */ +#define PHY_CFG_TIMEOUT 40 + #define E1000_TX_BUFFER_SIZE ((uint32_t)1514) /* The carrier extension symbol, as received by the NIC. */ @@ -1763,6 +2266,7 @@ struct e1000_hw { #define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health Register */ #define IGP01E1000_GMII_FIFO 0x14 /* GMII FIFO Register */ #define IGP01E1000_PHY_CHANNEL_QUALITY 0x15 /* PHY Channel Quality Register */ +#define IGP02E1000_PHY_POWER_MGMT 0x19 #define IGP01E1000_PHY_PAGE_SELECT 0x1F /* PHY Page Select Core Register */ /* IGP01E1000 AGC Registers - stores the cable length values*/ @@ -1771,12 +2275,20 @@ struct e1000_hw { #define IGP01E1000_PHY_AGC_C 0x1472 #define IGP01E1000_PHY_AGC_D 0x1872 +/* IGP02E1000 AGC Registers for cable length values */ +#define IGP02E1000_PHY_AGC_A 0x11B1 +#define IGP02E1000_PHY_AGC_B 0x12B1 +#define IGP02E1000_PHY_AGC_C 0x14B1 +#define IGP02E1000_PHY_AGC_D 0x18B1 + /* IGP01E1000 DSP Reset Register */ #define IGP01E1000_PHY_DSP_RESET 0x1F33 #define IGP01E1000_PHY_DSP_SET 0x1F71 #define IGP01E1000_PHY_DSP_FFE 0x1F35 #define IGP01E1000_PHY_CHANNEL_NUM 4 +#define IGP02E1000_PHY_CHANNEL_NUM 4 + #define IGP01E1000_PHY_AGC_PARAM_A 0x1171 #define IGP01E1000_PHY_AGC_PARAM_B 0x1271 #define IGP01E1000_PHY_AGC_PARAM_C 0x1471 @@ -2060,20 +2572,30 @@ struct e1000_hw { #define IGP01E1000_MSE_CHANNEL_B 0x0F00 #define IGP01E1000_MSE_CHANNEL_A 0xF000 +#define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */ +#define IGP02E1000_PM_D3_LPLU 0x0004 /* Enable LPLU in non-D0a modes */ +#define IGP02E1000_PM_D0_LPLU 0x0002 /* Enable LPLU in D0a mode */ + /* IGP01E1000 DSP reset macros */ #define DSP_RESET_ENABLE 0x0 #define DSP_RESET_DISABLE 0x2 #define E1000_MAX_DSP_RESETS 10 -/* IGP01E1000 AGC Registers */ +/* IGP01E1000 & IGP02E1000 AGC Registers */ #define IGP01E1000_AGC_LENGTH_SHIFT 7 /* Coarse - 13:11, Fine - 10:7 */ +#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Coarse - 15:13, Fine - 12:9 */ + +/* IGP02E1000 AGC Register Length 9-bit mask */ +#define IGP02E1000_AGC_LENGTH_MASK 0x7F /* 7 bits (3 Coarse + 4 Fine) --> 128 optional values */ #define IGP01E1000_AGC_LENGTH_TABLE_SIZE 128 +#define IGP02E1000_AGC_LENGTH_TABLE_SIZE 128 -/* The precision of the length is +/- 10 meters */ +/* The precision error of the cable length is +/- 10 meters */ #define IGP01E1000_AGC_RANGE 10 +#define IGP02E1000_AGC_RANGE 10 /* IGP01E1000 PCS Initialization register */ /* bits 3:6 in the PCS registers stores the channels polarity */ @@ -2113,6 +2635,8 @@ struct e1000_hw { #define M88E1000_12_PHY_ID M88E1000_E_PHY_ID #define M88E1000_14_PHY_ID M88E1000_E_PHY_ID #define M88E1011_I_REV_4 0x04 +#define M88E1111_I_PHY_ID 0x01410CC0 +#define L1LXT971A_PHY_ID 0x001378E0 /* Miscellaneous PHY bit definitions. */ #define PHY_PREAMBLE 0xFFFFFFFF diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 4cdf371961e..5e6e1f7fd77 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -155,10 +155,14 @@ static boolean_t e1000_clean_tx_irq(struct e1000_adapter *adapter); static int e1000_clean(struct net_device *netdev, int *budget); static boolean_t e1000_clean_rx_irq(struct e1000_adapter *adapter, int *work_done, int work_to_do); +static boolean_t e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, + int *work_done, int work_to_do); #else static boolean_t e1000_clean_rx_irq(struct e1000_adapter *adapter); +static boolean_t e1000_clean_rx_irq_ps(struct e1000_adapter *adapter); #endif static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter); +static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter); static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd); static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd); @@ -286,7 +290,29 @@ e1000_irq_enable(struct e1000_adapter *adapter) E1000_WRITE_FLUSH(&adapter->hw); } } - +void +e1000_update_mng_vlan(struct e1000_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + uint16_t vid = adapter->hw.mng_cookie.vlan_id; + uint16_t old_vid = adapter->mng_vlan_id; + if(adapter->vlgrp) { + if(!adapter->vlgrp->vlan_devices[vid]) { + if(adapter->hw.mng_cookie.status & + E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) { + e1000_vlan_rx_add_vid(netdev, vid); + adapter->mng_vlan_id = vid; + } else + adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; + + if((old_vid != (uint16_t)E1000_MNG_VLAN_NONE) && + (vid != old_vid) && + !adapter->vlgrp->vlan_devices[old_vid]) + e1000_vlan_rx_kill_vid(netdev, old_vid); + } + } +} + int e1000_up(struct e1000_adapter *adapter) { @@ -310,7 +336,7 @@ e1000_up(struct e1000_adapter *adapter) e1000_configure_tx(adapter); e1000_setup_rctl(adapter); e1000_configure_rx(adapter); - e1000_alloc_rx_buffers(adapter); + adapter->alloc_rx_buf(adapter); #ifdef CONFIG_PCI_MSI if(adapter->hw.mac_type > e1000_82547_rev_2) { @@ -366,8 +392,12 @@ e1000_down(struct e1000_adapter *adapter) e1000_clean_rx_ring(adapter); /* If WoL is not enabled + * and management mode is not IAMT * Power down the PHY so no link is implied when interface is down */ - if(!adapter->wol && adapter->hw.media_type == e1000_media_type_copper) { + if(!adapter->wol && adapter->hw.mac_type >= e1000_82540 && + adapter->hw.media_type == e1000_media_type_copper && + !e1000_check_mng_mode(&adapter->hw) && + !(E1000_READ_REG(&adapter->hw, MANC) & E1000_MANC_SMBUS_EN)) { uint16_t mii_reg; e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg); mii_reg |= MII_CR_POWER_DOWN; @@ -379,28 +409,34 @@ e1000_down(struct e1000_adapter *adapter) void e1000_reset(struct e1000_adapter *adapter) { - uint32_t pba; + uint32_t pba, manc; /* Repartition Pba for greater than 9k mtu * To take effect CTRL.RST is required. */ - if(adapter->hw.mac_type < e1000_82547) { - if(adapter->rx_buffer_len > E1000_RXBUFFER_8192) - pba = E1000_PBA_40K; - else - pba = E1000_PBA_48K; - } else { - if(adapter->rx_buffer_len > E1000_RXBUFFER_8192) - pba = E1000_PBA_22K; - else - pba = E1000_PBA_30K; + switch (adapter->hw.mac_type) { + case e1000_82547: + pba = E1000_PBA_30K; + break; + case e1000_82573: + pba = E1000_PBA_12K; + break; + default: + pba = E1000_PBA_48K; + break; + } + + + + if(adapter->hw.mac_type == e1000_82547) { adapter->tx_fifo_head = 0; adapter->tx_head_addr = pba << E1000_TX_HEAD_ADDR_SHIFT; adapter->tx_fifo_size = (E1000_PBA_40K - pba) << E1000_PBA_BYTES_SHIFT; atomic_set(&adapter->tx_fifo_stall, 0); } + E1000_WRITE_REG(&adapter->hw, PBA, pba); /* flow control settings */ @@ -412,17 +448,23 @@ e1000_reset(struct e1000_adapter *adapter) adapter->hw.fc_send_xon = 1; adapter->hw.fc = adapter->hw.original_fc; + /* Allow time for pending master requests to run */ e1000_reset_hw(&adapter->hw); if(adapter->hw.mac_type >= e1000_82544) E1000_WRITE_REG(&adapter->hw, WUC, 0); if(e1000_init_hw(&adapter->hw)) DPRINTK(PROBE, ERR, "Hardware Error\n"); - + e1000_update_mng_vlan(adapter); /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */ E1000_WRITE_REG(&adapter->hw, VET, ETHERNET_IEEE_VLAN_TYPE); e1000_reset_adaptive(&adapter->hw); e1000_phy_get_info(&adapter->hw, &adapter->phy_info); + if (adapter->en_mng_pt) { + manc = E1000_READ_REG(&adapter->hw, MANC); + manc |= (E1000_MANC_ARP_EN | E1000_MANC_EN_MNG2HOST); + E1000_WRITE_REG(&adapter->hw, MANC, manc); + } } /** @@ -443,15 +485,13 @@ e1000_probe(struct pci_dev *pdev, { struct net_device *netdev; struct e1000_adapter *adapter; + unsigned long mmio_start, mmio_len; + uint32_t swsm; + static int cards_found = 0; - unsigned long mmio_start; - int mmio_len; - int pci_using_dac; - int i; - int err; + int i, err, pci_using_dac; uint16_t eeprom_data; uint16_t eeprom_apme_mask = E1000_EEPROM_APME; - if((err = pci_enable_device(pdev))) return err; @@ -538,6 +578,9 @@ e1000_probe(struct pci_dev *pdev, if((err = e1000_sw_init(adapter))) goto err_sw_init; + if((err = e1000_check_phy_reset_block(&adapter->hw))) + DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n"); + if(adapter->hw.mac_type >= e1000_82543) { netdev->features = NETIF_F_SG | NETIF_F_HW_CSUM | @@ -550,6 +593,11 @@ e1000_probe(struct pci_dev *pdev, if((adapter->hw.mac_type >= e1000_82544) && (adapter->hw.mac_type != e1000_82547)) netdev->features |= NETIF_F_TSO; + +#ifdef NETIF_F_TSO_IPV6 + if(adapter->hw.mac_type > e1000_82547_rev_2) + netdev->features |= NETIF_F_TSO_IPV6; +#endif #endif if(pci_using_dac) netdev->features |= NETIF_F_HIGHDMA; @@ -557,6 +605,8 @@ e1000_probe(struct pci_dev *pdev, /* hard_start_xmit is safe against parallel locking */ netdev->features |= NETIF_F_LLTX; + adapter->en_mng_pt = e1000_enable_mng_pass_thru(&adapter->hw); + /* before reading the EEPROM, reset the controller to * put the device in a known good starting state */ @@ -646,6 +696,17 @@ e1000_probe(struct pci_dev *pdev, /* reset the hardware with the new settings */ e1000_reset(adapter); + /* Let firmware know the driver has taken over */ + switch(adapter->hw.mac_type) { + case e1000_82573: + swsm = E1000_READ_REG(&adapter->hw, SWSM); + E1000_WRITE_REG(&adapter->hw, SWSM, + swsm | E1000_SWSM_DRV_LOAD); + break; + default: + break; + } + strcpy(netdev->name, "eth%d"); if((err = register_netdev(netdev))) goto err_register; @@ -681,7 +742,7 @@ e1000_remove(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev->priv; - uint32_t manc; + uint32_t manc, swsm; flush_scheduled_work(); @@ -694,9 +755,21 @@ e1000_remove(struct pci_dev *pdev) } } + switch(adapter->hw.mac_type) { + case e1000_82573: + swsm = E1000_READ_REG(&adapter->hw, SWSM); + E1000_WRITE_REG(&adapter->hw, SWSM, + swsm & ~E1000_SWSM_DRV_LOAD); + break; + + default: + break; + } + unregister_netdev(netdev); - e1000_phy_hw_reset(&adapter->hw); + if(!e1000_check_phy_reset_block(&adapter->hw)) + e1000_phy_hw_reset(&adapter->hw); iounmap(adapter->hw.hw_addr); pci_release_regions(pdev); @@ -734,6 +807,7 @@ e1000_sw_init(struct e1000_adapter *adapter) pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word); adapter->rx_buffer_len = E1000_RXBUFFER_2048; + adapter->rx_ps_bsize0 = E1000_RXBUFFER_256; hw->max_frame_size = netdev->mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE; hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE; @@ -747,7 +821,10 @@ e1000_sw_init(struct e1000_adapter *adapter) /* initialize eeprom parameters */ - e1000_init_eeprom_params(hw); + if(e1000_init_eeprom_params(hw)) { + E1000_ERR("EEPROM initialization failed\n"); + return -EIO; + } switch(hw->mac_type) { default: @@ -812,6 +889,11 @@ e1000_open(struct net_device *netdev) if((err = e1000_up(adapter))) goto err_up; + adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; + if((adapter->hw.mng_cookie.status & + E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) { + e1000_update_mng_vlan(adapter); + } return E1000_SUCCESS; @@ -847,14 +929,18 @@ e1000_close(struct net_device *netdev) e1000_free_tx_resources(adapter); e1000_free_rx_resources(adapter); + if((adapter->hw.mng_cookie.status & + E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) { + e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id); + } return 0; } /** * e1000_check_64k_bound - check that memory doesn't cross 64kB boundary * @adapter: address of board private structure - * @begin: address of beginning of memory - * @end: address of end of memory + * @start: address of beginning of memory + * @len: length of memory **/ static inline boolean_t e1000_check_64k_bound(struct e1000_adapter *adapter, @@ -1039,7 +1125,7 @@ e1000_setup_rx_resources(struct e1000_adapter *adapter) { struct e1000_desc_ring *rxdr = &adapter->rx_ring; struct pci_dev *pdev = adapter->pdev; - int size; + int size, desc_len; size = sizeof(struct e1000_buffer) * rxdr->count; rxdr->buffer_info = vmalloc(size); @@ -1050,9 +1136,35 @@ e1000_setup_rx_resources(struct e1000_adapter *adapter) } memset(rxdr->buffer_info, 0, size); + size = sizeof(struct e1000_ps_page) * rxdr->count; + rxdr->ps_page = kmalloc(size, GFP_KERNEL); + if(!rxdr->ps_page) { + vfree(rxdr->buffer_info); + DPRINTK(PROBE, ERR, + "Unable to allocate memory for the receive descriptor ring\n"); + return -ENOMEM; + } + memset(rxdr->ps_page, 0, size); + + size = sizeof(struct e1000_ps_page_dma) * rxdr->count; + rxdr->ps_page_dma = kmalloc(size, GFP_KERNEL); + if(!rxdr->ps_page_dma) { + vfree(rxdr->buffer_info); + kfree(rxdr->ps_page); + DPRINTK(PROBE, ERR, + "Unable to allocate memory for the receive descriptor ring\n"); + return -ENOMEM; + } + memset(rxdr->ps_page_dma, 0, size); + + if(adapter->hw.mac_type <= e1000_82547_rev_2) + desc_len = sizeof(struct e1000_rx_desc); + else + desc_len = sizeof(union e1000_rx_desc_packet_split); + /* Round up to nearest 4K */ - rxdr->size = rxdr->count * sizeof(struct e1000_rx_desc); + rxdr->size = rxdr->count * desc_len; E1000_ROUNDUP(rxdr->size, 4096); rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma); @@ -1062,6 +1174,8 @@ setup_rx_desc_die: DPRINTK(PROBE, ERR, "Unble to Allocate Memory for the Recieve descriptor ring\n"); vfree(rxdr->buffer_info); + kfree(rxdr->ps_page); + kfree(rxdr->ps_page_dma); return -ENOMEM; } @@ -1089,6 +1203,8 @@ setup_rx_desc_die: "Unable to Allocate aligned Memory for the" " Receive descriptor ring\n"); vfree(rxdr->buffer_info); + kfree(rxdr->ps_page); + kfree(rxdr->ps_page_dma); return -ENOMEM; } else { /* free old, move on with the new one since its okay */ @@ -1111,7 +1227,8 @@ setup_rx_desc_die: static void e1000_setup_rctl(struct e1000_adapter *adapter) { - uint32_t rctl; + uint32_t rctl, rfctl; + uint32_t psrctl = 0; rctl = E1000_READ_REG(&adapter->hw, RCTL); @@ -1126,24 +1243,69 @@ e1000_setup_rctl(struct e1000_adapter *adapter) else rctl &= ~E1000_RCTL_SBP; + if (adapter->netdev->mtu <= ETH_DATA_LEN) + rctl &= ~E1000_RCTL_LPE; + else + rctl |= E1000_RCTL_LPE; + /* Setup buffer sizes */ - rctl &= ~(E1000_RCTL_SZ_4096); - rctl |= (E1000_RCTL_BSEX | E1000_RCTL_LPE); - switch (adapter->rx_buffer_len) { - case E1000_RXBUFFER_2048: - default: - rctl |= E1000_RCTL_SZ_2048; - rctl &= ~(E1000_RCTL_BSEX | E1000_RCTL_LPE); - break; - case E1000_RXBUFFER_4096: - rctl |= E1000_RCTL_SZ_4096; - break; - case E1000_RXBUFFER_8192: - rctl |= E1000_RCTL_SZ_8192; - break; - case E1000_RXBUFFER_16384: - rctl |= E1000_RCTL_SZ_16384; - break; + if(adapter->hw.mac_type == e1000_82573) { + /* We can now specify buffers in 1K increments. + * BSIZE and BSEX are ignored in this case. */ + rctl |= adapter->rx_buffer_len << 0x11; + } else { + rctl &= ~E1000_RCTL_SZ_4096; + rctl |= E1000_RCTL_BSEX; + switch (adapter->rx_buffer_len) { + case E1000_RXBUFFER_2048: + default: + rctl |= E1000_RCTL_SZ_2048; + rctl &= ~E1000_RCTL_BSEX; + break; + case E1000_RXBUFFER_4096: + rctl |= E1000_RCTL_SZ_4096; + break; + case E1000_RXBUFFER_8192: + rctl |= E1000_RCTL_SZ_8192; + break; + case E1000_RXBUFFER_16384: + rctl |= E1000_RCTL_SZ_16384; + break; + } + } + +#ifdef CONFIG_E1000_PACKET_SPLIT + /* 82571 and greater support packet-split where the protocol + * header is placed in skb->data and the packet data is + * placed in pages hanging off of skb_shinfo(skb)->nr_frags. + * In the case of a non-split, skb->data is linearly filled, + * followed by the page buffers. Therefore, skb->data is + * sized to hold the largest protocol header. + */ + adapter->rx_ps = (adapter->hw.mac_type > e1000_82547_rev_2) + && (adapter->netdev->mtu + < ((3 * PAGE_SIZE) + adapter->rx_ps_bsize0)); +#endif + if(adapter->rx_ps) { + /* Configure extra packet-split registers */ + rfctl = E1000_READ_REG(&adapter->hw, RFCTL); + rfctl |= E1000_RFCTL_EXTEN; + /* disable IPv6 packet split support */ + rfctl |= E1000_RFCTL_IPV6_DIS; + E1000_WRITE_REG(&adapter->hw, RFCTL, rfctl); + + rctl |= E1000_RCTL_DTYP_PS | E1000_RCTL_SECRC; + + psrctl |= adapter->rx_ps_bsize0 >> + E1000_PSRCTL_BSIZE0_SHIFT; + psrctl |= PAGE_SIZE >> + E1000_PSRCTL_BSIZE1_SHIFT; + psrctl |= PAGE_SIZE << + E1000_PSRCTL_BSIZE2_SHIFT; + psrctl |= PAGE_SIZE << + E1000_PSRCTL_BSIZE3_SHIFT; + + E1000_WRITE_REG(&adapter->hw, PSRCTL, psrctl); } E1000_WRITE_REG(&adapter->hw, RCTL, rctl); @@ -1160,9 +1322,18 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) { uint64_t rdba = adapter->rx_ring.dma; - uint32_t rdlen = adapter->rx_ring.count * sizeof(struct e1000_rx_desc); - uint32_t rctl; - uint32_t rxcsum; + uint32_t rdlen, rctl, rxcsum; + + if(adapter->rx_ps) { + rdlen = adapter->rx_ring.count * + sizeof(union e1000_rx_desc_packet_split); + adapter->clean_rx = e1000_clean_rx_irq_ps; + adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps; + } else { + rdlen = adapter->rx_ring.count * sizeof(struct e1000_rx_desc); + adapter->clean_rx = e1000_clean_rx_irq; + adapter->alloc_rx_buf = e1000_alloc_rx_buffers; + } /* disable receives while setting up the descriptors */ rctl = E1000_READ_REG(&adapter->hw, RCTL); @@ -1189,13 +1360,27 @@ e1000_configure_rx(struct e1000_adapter *adapter) E1000_WRITE_REG(&adapter->hw, RDT, 0); /* Enable 82543 Receive Checksum Offload for TCP and UDP */ - if((adapter->hw.mac_type >= e1000_82543) && - (adapter->rx_csum == TRUE)) { + if(adapter->hw.mac_type >= e1000_82543) { rxcsum = E1000_READ_REG(&adapter->hw, RXCSUM); - rxcsum |= E1000_RXCSUM_TUOFL; + if(adapter->rx_csum == TRUE) { + rxcsum |= E1000_RXCSUM_TUOFL; + + /* Enable 82573 IPv4 payload checksum for UDP fragments + * Must be used in conjunction with packet-split. */ + if((adapter->hw.mac_type > e1000_82547_rev_2) && + (adapter->rx_ps)) { + rxcsum |= E1000_RXCSUM_IPPCSE; + } + } else { + rxcsum &= ~E1000_RXCSUM_TUOFL; + /* don't need to clear IPPCSE as it defaults to 0 */ + } E1000_WRITE_REG(&adapter->hw, RXCSUM, rxcsum); } + if (adapter->hw.mac_type == e1000_82573) + E1000_WRITE_REG(&adapter->hw, ERT, 0x0100); + /* Enable Receives */ E1000_WRITE_REG(&adapter->hw, RCTL, rctl); } @@ -1298,6 +1483,10 @@ e1000_free_rx_resources(struct e1000_adapter *adapter) vfree(rx_ring->buffer_info); rx_ring->buffer_info = NULL; + kfree(rx_ring->ps_page); + rx_ring->ps_page = NULL; + kfree(rx_ring->ps_page_dma); + rx_ring->ps_page_dma = NULL; pci_free_consistent(pdev, rx_ring->size, rx_ring->desc, rx_ring->dma); @@ -1314,16 +1503,19 @@ e1000_clean_rx_ring(struct e1000_adapter *adapter) { struct e1000_desc_ring *rx_ring = &adapter->rx_ring; struct e1000_buffer *buffer_info; + struct e1000_ps_page *ps_page; + struct e1000_ps_page_dma *ps_page_dma; struct pci_dev *pdev = adapter->pdev; unsigned long size; - unsigned int i; + unsigned int i, j; /* Free all the Rx ring sk_buffs */ for(i = 0; i < rx_ring->count; i++) { buffer_info = &rx_ring->buffer_info[i]; if(buffer_info->skb) { - + ps_page = &rx_ring->ps_page[i]; + ps_page_dma = &rx_ring->ps_page_dma[i]; pci_unmap_single(pdev, buffer_info->dma, buffer_info->length, @@ -1331,11 +1523,25 @@ e1000_clean_rx_ring(struct e1000_adapter *adapter) dev_kfree_skb(buffer_info->skb); buffer_info->skb = NULL; + + for(j = 0; j < PS_PAGE_BUFFERS; j++) { + if(!ps_page->ps_page[j]) break; + pci_unmap_single(pdev, + ps_page_dma->ps_page_dma[j], + PAGE_SIZE, PCI_DMA_FROMDEVICE); + ps_page_dma->ps_page_dma[j] = 0; + put_page(ps_page->ps_page[j]); + ps_page->ps_page[j] = NULL; + } } } size = sizeof(struct e1000_buffer) * rx_ring->count; memset(rx_ring->buffer_info, 0, size); + size = sizeof(struct e1000_ps_page) * rx_ring->count; + memset(rx_ring->ps_page, 0, size); + size = sizeof(struct e1000_ps_page_dma) * rx_ring->count; + memset(rx_ring->ps_page_dma, 0, size); /* Zero out the descriptor ring */ @@ -1573,6 +1779,11 @@ e1000_watchdog_task(struct e1000_adapter *adapter) uint32_t link; e1000_check_for_link(&adapter->hw); + if (adapter->hw.mac_type == e1000_82573) { + e1000_enable_tx_pkt_filtering(&adapter->hw); + if(adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id) + e1000_update_mng_vlan(adapter); + } if((adapter->hw.media_type == e1000_media_type_internal_serdes) && !(E1000_READ_REG(&adapter->hw, TXCW) & E1000_TXCW_ANE)) @@ -1659,6 +1870,7 @@ e1000_watchdog_task(struct e1000_adapter *adapter) #define E1000_TX_FLAGS_CSUM 0x00000001 #define E1000_TX_FLAGS_VLAN 0x00000002 #define E1000_TX_FLAGS_TSO 0x00000004 +#define E1000_TX_FLAGS_IPV4 0x00000008 #define E1000_TX_FLAGS_VLAN_MASK 0xffff0000 #define E1000_TX_FLAGS_VLAN_SHIFT 16 @@ -1669,7 +1881,7 @@ e1000_tso(struct e1000_adapter *adapter, struct sk_buff *skb) struct e1000_context_desc *context_desc; unsigned int i; uint32_t cmd_length = 0; - uint16_t ipcse, tucse, mss; + uint16_t ipcse = 0, tucse, mss; uint8_t ipcss, ipcso, tucss, tucso, hdr_len; int err; @@ -1682,23 +1894,37 @@ e1000_tso(struct e1000_adapter *adapter, struct sk_buff *skb) hdr_len = ((skb->h.raw - skb->data) + (skb->h.th->doff << 2)); mss = skb_shinfo(skb)->tso_size; - skb->nh.iph->tot_len = 0; - skb->nh.iph->check = 0; - skb->h.th->check = ~csum_tcpudp_magic(skb->nh.iph->saddr, - skb->nh.iph->daddr, - 0, - IPPROTO_TCP, - 0); + if(skb->protocol == ntohs(ETH_P_IP)) { + skb->nh.iph->tot_len = 0; + skb->nh.iph->check = 0; + skb->h.th->check = + ~csum_tcpudp_magic(skb->nh.iph->saddr, + skb->nh.iph->daddr, + 0, + IPPROTO_TCP, + 0); + cmd_length = E1000_TXD_CMD_IP; + ipcse = skb->h.raw - skb->data - 1; +#ifdef NETIF_F_TSO_IPV6 + } else if(skb->protocol == ntohs(ETH_P_IPV6)) { + skb->nh.ipv6h->payload_len = 0; + skb->h.th->check = + ~csum_ipv6_magic(&skb->nh.ipv6h->saddr, + &skb->nh.ipv6h->daddr, + 0, + IPPROTO_TCP, + 0); + ipcse = 0; +#endif + } ipcss = skb->nh.raw - skb->data; ipcso = (void *)&(skb->nh.iph->check) - (void *)skb->data; - ipcse = skb->h.raw - skb->data - 1; tucss = skb->h.raw - skb->data; tucso = (void *)&(skb->h.th->check) - (void *)skb->data; tucse = 0; cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE | - E1000_TXD_CMD_IP | E1000_TXD_CMD_TCP | - (skb->len - (hdr_len))); + E1000_TXD_CMD_TCP | (skb->len - (hdr_len))); i = adapter->tx_ring.next_to_use; context_desc = E1000_CONTEXT_DESC(adapter->tx_ring, i); @@ -1866,7 +2092,10 @@ e1000_tx_queue(struct e1000_adapter *adapter, int count, int tx_flags) if(likely(tx_flags & E1000_TX_FLAGS_TSO)) { txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D | E1000_TXD_CMD_TSE; - txd_upper |= (E1000_TXD_POPTS_IXSM | E1000_TXD_POPTS_TXSM) << 8; + txd_upper |= E1000_TXD_POPTS_TXSM << 8; + + if(likely(tx_flags & E1000_TX_FLAGS_IPV4)) + txd_upper |= E1000_TXD_POPTS_IXSM << 8; } if(likely(tx_flags & E1000_TX_FLAGS_CSUM)) { @@ -1941,6 +2170,53 @@ no_fifo_stall_required: return 0; } +#define MINIMUM_DHCP_PACKET_SIZE 282 +static inline int +e1000_transfer_dhcp_info(struct e1000_adapter *adapter, struct sk_buff *skb) +{ + struct e1000_hw *hw = &adapter->hw; + uint16_t length, offset; + if(vlan_tx_tag_present(skb)) { + if(!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) && + ( adapter->hw.mng_cookie.status & + E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) ) + return 0; + } + if(htons(ETH_P_IP) == skb->protocol) { + const struct iphdr *ip = skb->nh.iph; + if(IPPROTO_UDP == ip->protocol) { + struct udphdr *udp = (struct udphdr *)(skb->h.uh); + if(ntohs(udp->dest) == 67) { + offset = (uint8_t *)udp + 8 - skb->data; + length = skb->len - offset; + + return e1000_mng_write_dhcp_info(hw, + (uint8_t *)udp + 8, length); + } + } + } else if((skb->len > MINIMUM_DHCP_PACKET_SIZE) && (!skb->protocol)) { + struct ethhdr *eth = (struct ethhdr *) skb->data; + if((htons(ETH_P_IP) == eth->h_proto)) { + const struct iphdr *ip = + (struct iphdr *)((uint8_t *)skb->data+14); + if(IPPROTO_UDP == ip->protocol) { + struct udphdr *udp = + (struct udphdr *)((uint8_t *)ip + + (ip->ihl << 2)); + if(ntohs(udp->dest) == 67) { + offset = (uint8_t *)udp + 8 - skb->data; + length = skb->len - offset; + + return e1000_mng_write_dhcp_info(hw, + (uint8_t *)udp + 8, + length); + } + } + } + } + return 0; +} + #define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 ) static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) @@ -2008,6 +2284,9 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) local_irq_restore(flags); return NETDEV_TX_LOCKED; } + if(adapter->hw.tx_pkt_filtering && (adapter->hw.mac_type == e1000_82573) ) + e1000_transfer_dhcp_info(adapter, skb); + /* need: count + 2 desc gap to keep tail from touching * head, otherwise try next time */ @@ -2044,6 +2323,12 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) else if(likely(e1000_tx_csum(adapter, skb))) tx_flags |= E1000_TX_FLAGS_CSUM; + /* Old method was to assume IPv4 packet by default if TSO was enabled. + * 82573 hardware supports TSO capabilities for IPv6 as well... + * no longer assume, we must. */ + if(likely(skb->protocol == ntohs(ETH_P_IP))) + tx_flags |= E1000_TX_FLAGS_IPV4; + e1000_tx_queue(adapter, e1000_tx_map(adapter, skb, first, max_per_txd, nr_frags, mss), tx_flags); @@ -2110,7 +2395,6 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) { struct e1000_adapter *adapter = netdev->priv; - int old_mtu = adapter->rx_buffer_len; int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE; if((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) || @@ -2119,29 +2403,45 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu) return -EINVAL; } - if(max_frame <= MAXIMUM_ETHERNET_FRAME_SIZE) { - adapter->rx_buffer_len = E1000_RXBUFFER_2048; - - } else if(adapter->hw.mac_type < e1000_82543) { - DPRINTK(PROBE, ERR, "Jumbo Frames not supported on 82542\n"); +#define MAX_STD_JUMBO_FRAME_SIZE 9216 + /* might want this to be bigger enum check... */ + if (adapter->hw.mac_type == e1000_82573 && + max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) { + DPRINTK(PROBE, ERR, "Jumbo Frames not supported " + "on 82573\n"); return -EINVAL; + } - } else if(max_frame <= E1000_RXBUFFER_4096) { - adapter->rx_buffer_len = E1000_RXBUFFER_4096; - - } else if(max_frame <= E1000_RXBUFFER_8192) { - adapter->rx_buffer_len = E1000_RXBUFFER_8192; - + if(adapter->hw.mac_type > e1000_82547_rev_2) { + adapter->rx_buffer_len = max_frame; + E1000_ROUNDUP(adapter->rx_buffer_len, 1024); } else { - adapter->rx_buffer_len = E1000_RXBUFFER_16384; + if(unlikely((adapter->hw.mac_type < e1000_82543) && + (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE))) { + DPRINTK(PROBE, ERR, "Jumbo Frames not supported " + "on 82542\n"); + return -EINVAL; + + } else { + if(max_frame <= E1000_RXBUFFER_2048) { + adapter->rx_buffer_len = E1000_RXBUFFER_2048; + } else if(max_frame <= E1000_RXBUFFER_4096) { + adapter->rx_buffer_len = E1000_RXBUFFER_4096; + } else if(max_frame <= E1000_RXBUFFER_8192) { + adapter->rx_buffer_len = E1000_RXBUFFER_8192; + } else if(max_frame <= E1000_RXBUFFER_16384) { + adapter->rx_buffer_len = E1000_RXBUFFER_16384; + } + } } - if(old_mtu != adapter->rx_buffer_len && netif_running(netdev)) { + netdev->mtu = new_mtu; + + if(netif_running(netdev)) { e1000_down(adapter); e1000_up(adapter); } - netdev->mtu = new_mtu; adapter->hw.max_frame_size = max_frame; return 0; @@ -2232,6 +2532,17 @@ e1000_update_stats(struct e1000_adapter *adapter) adapter->stats.tsctc += E1000_READ_REG(hw, TSCTC); adapter->stats.tsctfc += E1000_READ_REG(hw, TSCTFC); } + if(hw->mac_type > e1000_82547_rev_2) { + adapter->stats.iac += E1000_READ_REG(hw, IAC); + adapter->stats.icrxoc += E1000_READ_REG(hw, ICRXOC); + adapter->stats.icrxptc += E1000_READ_REG(hw, ICRXPTC); + adapter->stats.icrxatc += E1000_READ_REG(hw, ICRXATC); + adapter->stats.ictxptc += E1000_READ_REG(hw, ICTXPTC); + adapter->stats.ictxatc += E1000_READ_REG(hw, ICTXATC); + adapter->stats.ictxqec += E1000_READ_REG(hw, ICTXQEC); + adapter->stats.ictxqmtc += E1000_READ_REG(hw, ICTXQMTC); + adapter->stats.icrxdmtc += E1000_READ_REG(hw, ICRXDMTC); + } /* Fill out the OS statistics structure */ @@ -2337,7 +2648,7 @@ e1000_intr(int irq, void *data, struct pt_regs *regs) } for(i = 0; i < E1000_MAX_INTR; i++) - if(unlikely(!e1000_clean_rx_irq(adapter) & + if(unlikely(!adapter->clean_rx(adapter) & !e1000_clean_tx_irq(adapter))) break; @@ -2363,7 +2674,7 @@ e1000_clean(struct net_device *netdev, int *budget) int work_done = 0; tx_cleaned = e1000_clean_tx_irq(adapter); - e1000_clean_rx_irq(adapter, &work_done, work_to_do); + adapter->clean_rx(adapter, &work_done, work_to_do); *budget -= work_done; netdev->quota -= work_done; @@ -2501,41 +2812,57 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter) /** * e1000_rx_checksum - Receive Checksum Offload for 82543 - * @adapter: board private structure - * @rx_desc: receive descriptor - * @sk_buff: socket buffer with received data + * @adapter: board private structure + * @status_err: receive descriptor status and error fields + * @csum: receive descriptor csum field + * @sk_buff: socket buffer with received data **/ static inline void e1000_rx_checksum(struct e1000_adapter *adapter, - struct e1000_rx_desc *rx_desc, - struct sk_buff *skb) + uint32_t status_err, uint32_t csum, + struct sk_buff *skb) { + uint16_t status = (uint16_t)status_err; + uint8_t errors = (uint8_t)(status_err >> 24); + skb->ip_summed = CHECKSUM_NONE; + /* 82543 or newer only */ - if(unlikely((adapter->hw.mac_type < e1000_82543) || + if(unlikely(adapter->hw.mac_type < e1000_82543)) return; /* Ignore Checksum bit is set */ - (rx_desc->status & E1000_RXD_STAT_IXSM) || - /* TCP Checksum has not been calculated */ - (!(rx_desc->status & E1000_RXD_STAT_TCPCS)))) { - skb->ip_summed = CHECKSUM_NONE; - return; - } - - /* At this point we know the hardware did the TCP checksum */ - /* now look at the TCP checksum error bit */ - if(rx_desc->errors & E1000_RXD_ERR_TCPE) { + if(unlikely(status & E1000_RXD_STAT_IXSM)) return; + /* TCP/UDP checksum error bit is set */ + if(unlikely(errors & E1000_RXD_ERR_TCPE)) { /* let the stack verify checksum errors */ - skb->ip_summed = CHECKSUM_NONE; adapter->hw_csum_err++; + return; + } + /* TCP/UDP Checksum has not been calculated */ + if(adapter->hw.mac_type <= e1000_82547_rev_2) { + if(!(status & E1000_RXD_STAT_TCPCS)) + return; } else { + if(!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS))) + return; + } + /* It must be a TCP or UDP packet with a valid checksum */ + if (likely(status & E1000_RXD_STAT_TCPCS)) { /* TCP checksum is good */ skb->ip_summed = CHECKSUM_UNNECESSARY; - adapter->hw_csum_good++; + } else if (adapter->hw.mac_type > e1000_82547_rev_2) { + /* IP fragment with UDP payload */ + /* Hardware complements the payload checksum, so we undo it + * and then put the value in host order for further stack use. + */ + csum = ntohl(csum ^ 0xFFFF); + skb->csum = csum; + skb->ip_summed = CHECKSUM_HW; } + adapter->hw_csum_good++; } /** - * e1000_clean_rx_irq - Send received data up the network stack + * e1000_clean_rx_irq - Send received data up the network stack; legacy * @adapter: board private structure **/ @@ -2608,15 +2935,17 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter) skb_put(skb, length - ETHERNET_FCS_SIZE); /* Receive Checksum Offload */ - e1000_rx_checksum(adapter, rx_desc, skb); - + e1000_rx_checksum(adapter, + (uint32_t)(rx_desc->status) | + ((uint32_t)(rx_desc->errors) << 24), + rx_desc->csum, skb); skb->protocol = eth_type_trans(skb, netdev); #ifdef CONFIG_E1000_NAPI if(unlikely(adapter->vlgrp && (rx_desc->status & E1000_RXD_STAT_VP))) { vlan_hwaccel_receive_skb(skb, adapter->vlgrp, - le16_to_cpu(rx_desc->special) & - E1000_RXD_SPC_VLAN_MASK); + le16_to_cpu(rx_desc->special) & + E1000_RXD_SPC_VLAN_MASK); } else { netif_receive_skb(skb); } @@ -2639,16 +2968,142 @@ next_desc: rx_desc = E1000_RX_DESC(*rx_ring, i); } - rx_ring->next_to_clean = i; + adapter->alloc_rx_buf(adapter); + + return cleaned; +} + +/** + * e1000_clean_rx_irq_ps - Send received data up the network stack; packet split + * @adapter: board private structure + **/ + +static boolean_t +#ifdef CONFIG_E1000_NAPI +e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, int *work_done, + int work_to_do) +#else +e1000_clean_rx_irq_ps(struct e1000_adapter *adapter) +#endif +{ + struct e1000_desc_ring *rx_ring = &adapter->rx_ring; + union e1000_rx_desc_packet_split *rx_desc; + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + struct e1000_buffer *buffer_info; + struct e1000_ps_page *ps_page; + struct e1000_ps_page_dma *ps_page_dma; + struct sk_buff *skb; + unsigned int i, j; + uint32_t length, staterr; + boolean_t cleaned = FALSE; + + i = rx_ring->next_to_clean; + rx_desc = E1000_RX_DESC_PS(*rx_ring, i); + staterr = rx_desc->wb.middle.status_error; + + while(staterr & E1000_RXD_STAT_DD) { + buffer_info = &rx_ring->buffer_info[i]; + ps_page = &rx_ring->ps_page[i]; + ps_page_dma = &rx_ring->ps_page_dma[i]; +#ifdef CONFIG_E1000_NAPI + if(unlikely(*work_done >= work_to_do)) + break; + (*work_done)++; +#endif + cleaned = TRUE; + pci_unmap_single(pdev, buffer_info->dma, + buffer_info->length, + PCI_DMA_FROMDEVICE); + + skb = buffer_info->skb; + + if(unlikely(!(staterr & E1000_RXD_STAT_EOP))) { + E1000_DBG("%s: Packet Split buffers didn't pick up" + " the full packet\n", netdev->name); + dev_kfree_skb_irq(skb); + goto next_desc; + } - e1000_alloc_rx_buffers(adapter); + if(unlikely(staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK)) { + dev_kfree_skb_irq(skb); + goto next_desc; + } + + length = le16_to_cpu(rx_desc->wb.middle.length0); + + if(unlikely(!length)) { + E1000_DBG("%s: Last part of the packet spanning" + " multiple descriptors\n", netdev->name); + dev_kfree_skb_irq(skb); + goto next_desc; + } + + /* Good Receive */ + skb_put(skb, length); + + for(j = 0; j < PS_PAGE_BUFFERS; j++) { + if(!(length = le16_to_cpu(rx_desc->wb.upper.length[j]))) + break; + + pci_unmap_page(pdev, ps_page_dma->ps_page_dma[j], + PAGE_SIZE, PCI_DMA_FROMDEVICE); + ps_page_dma->ps_page_dma[j] = 0; + skb_shinfo(skb)->frags[j].page = + ps_page->ps_page[j]; + ps_page->ps_page[j] = NULL; + skb_shinfo(skb)->frags[j].page_offset = 0; + skb_shinfo(skb)->frags[j].size = length; + skb_shinfo(skb)->nr_frags++; + skb->len += length; + skb->data_len += length; + } + + e1000_rx_checksum(adapter, staterr, + rx_desc->wb.lower.hi_dword.csum_ip.csum, skb); + skb->protocol = eth_type_trans(skb, netdev); + +#ifdef HAVE_RX_ZERO_COPY + if(likely(rx_desc->wb.upper.header_status & + E1000_RXDPS_HDRSTAT_HDRSP)) + skb_shinfo(skb)->zero_copy = TRUE; +#endif +#ifdef CONFIG_E1000_NAPI + if(unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) { + vlan_hwaccel_receive_skb(skb, adapter->vlgrp, + le16_to_cpu(rx_desc->wb.middle.vlan & + E1000_RXD_SPC_VLAN_MASK)); + } else { + netif_receive_skb(skb); + } +#else /* CONFIG_E1000_NAPI */ + if(unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) { + vlan_hwaccel_rx(skb, adapter->vlgrp, + le16_to_cpu(rx_desc->wb.middle.vlan & + E1000_RXD_SPC_VLAN_MASK)); + } else { + netif_rx(skb); + } +#endif /* CONFIG_E1000_NAPI */ + netdev->last_rx = jiffies; + +next_desc: + rx_desc->wb.middle.status_error &= ~0xFF; + buffer_info->skb = NULL; + if(unlikely(++i == rx_ring->count)) i = 0; + + rx_desc = E1000_RX_DESC_PS(*rx_ring, i); + staterr = rx_desc->wb.middle.status_error; + } + rx_ring->next_to_clean = i; + adapter->alloc_rx_buf(adapter); return cleaned; } /** - * e1000_alloc_rx_buffers - Replace used receive buffers + * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended * @adapter: address of board private structure **/ @@ -2752,6 +3207,95 @@ e1000_alloc_rx_buffers(struct e1000_adapter *adapter) rx_ring->next_to_use = i; } +/** + * e1000_alloc_rx_buffers_ps - Replace used receive buffers; packet split + * @adapter: address of board private structure + **/ + +static void +e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter) +{ + struct e1000_desc_ring *rx_ring = &adapter->rx_ring; + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + union e1000_rx_desc_packet_split *rx_desc; + struct e1000_buffer *buffer_info; + struct e1000_ps_page *ps_page; + struct e1000_ps_page_dma *ps_page_dma; + struct sk_buff *skb; + unsigned int i, j; + + i = rx_ring->next_to_use; + buffer_info = &rx_ring->buffer_info[i]; + ps_page = &rx_ring->ps_page[i]; + ps_page_dma = &rx_ring->ps_page_dma[i]; + + while(!buffer_info->skb) { + rx_desc = E1000_RX_DESC_PS(*rx_ring, i); + + for(j = 0; j < PS_PAGE_BUFFERS; j++) { + if(unlikely(!ps_page->ps_page[j])) { + ps_page->ps_page[j] = + alloc_page(GFP_ATOMIC); + if(unlikely(!ps_page->ps_page[j])) + goto no_buffers; + ps_page_dma->ps_page_dma[j] = + pci_map_page(pdev, + ps_page->ps_page[j], + 0, PAGE_SIZE, + PCI_DMA_FROMDEVICE); + } + /* Refresh the desc even if buffer_addrs didn't + * change because each write-back erases this info. + */ + rx_desc->read.buffer_addr[j+1] = + cpu_to_le64(ps_page_dma->ps_page_dma[j]); + } + + skb = dev_alloc_skb(adapter->rx_ps_bsize0 + NET_IP_ALIGN); + + if(unlikely(!skb)) + break; + + /* Make buffer alignment 2 beyond a 16 byte boundary + * this will result in a 16 byte aligned IP header after + * the 14 byte MAC header is removed + */ + skb_reserve(skb, NET_IP_ALIGN); + + skb->dev = netdev; + + buffer_info->skb = skb; + buffer_info->length = adapter->rx_ps_bsize0; + buffer_info->dma = pci_map_single(pdev, skb->data, + adapter->rx_ps_bsize0, + PCI_DMA_FROMDEVICE); + + rx_desc->read.buffer_addr[0] = cpu_to_le64(buffer_info->dma); + + if(unlikely((i & ~(E1000_RX_BUFFER_WRITE - 1)) == i)) { + /* Force memory writes to complete before letting h/w + * know there are new descriptors to fetch. (Only + * applicable for weak-ordered memory model archs, + * such as IA-64). */ + wmb(); + /* Hardware increments by 16 bytes, but packet split + * descriptors are 32 bytes...so we increment tail + * twice as much. + */ + E1000_WRITE_REG(&adapter->hw, RDT, i<<1); + } + + if(unlikely(++i == rx_ring->count)) i = 0; + buffer_info = &rx_ring->buffer_info[i]; + ps_page = &rx_ring->ps_page[i]; + ps_page_dma = &rx_ring->ps_page_dma[i]; + } + +no_buffers: + rx_ring->next_to_use = i; +} + /** * e1000_smartspeed - Workaround for SmartSpeed on 82541 and 82547 controllers. * @adapter: @@ -2986,6 +3530,7 @@ e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp) rctl |= E1000_RCTL_VFE; rctl &= ~E1000_RCTL_CFIEN; E1000_WRITE_REG(&adapter->hw, RCTL, rctl); + e1000_update_mng_vlan(adapter); } else { /* disable VLAN tag insert/strip */ ctrl = E1000_READ_REG(&adapter->hw, CTRL); @@ -2996,6 +3541,10 @@ e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp) rctl = E1000_READ_REG(&adapter->hw, RCTL); rctl &= ~E1000_RCTL_VFE; E1000_WRITE_REG(&adapter->hw, RCTL, rctl); + if(adapter->mng_vlan_id != (uint16_t)E1000_MNG_VLAN_NONE) { + e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id); + adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; + } } e1000_irq_enable(adapter); @@ -3006,7 +3555,10 @@ e1000_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid) { struct e1000_adapter *adapter = netdev->priv; uint32_t vfta, index; - + if((adapter->hw.mng_cookie.status & + E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) && + (vid == adapter->mng_vlan_id)) + return; /* add VID to filter table */ index = (vid >> 5) & 0x7F; vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index); @@ -3027,6 +3579,10 @@ e1000_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid) e1000_irq_enable(adapter); + if((adapter->hw.mng_cookie.status & + E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) && + (vid == adapter->mng_vlan_id)) + return; /* remove VID from filter table */ index = (vid >> 5) & 0x7F; vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index); @@ -3102,7 +3658,7 @@ e1000_suspend(struct pci_dev *pdev, uint32_t state) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev->priv; - uint32_t ctrl, ctrl_ext, rctl, manc, status; + uint32_t ctrl, ctrl_ext, rctl, manc, status, swsm; uint32_t wufc = adapter->wol; netif_device_detach(netdev); @@ -3144,6 +3700,9 @@ e1000_suspend(struct pci_dev *pdev, uint32_t state) E1000_WRITE_REG(&adapter->hw, CTRL_EXT, ctrl_ext); } + /* Allow time for pending master requests to run */ + e1000_disable_pciex_master(&adapter->hw); + E1000_WRITE_REG(&adapter->hw, WUC, E1000_WUC_PME_EN); E1000_WRITE_REG(&adapter->hw, WUFC, wufc); pci_enable_wake(pdev, 3, 1); @@ -3168,6 +3727,16 @@ e1000_suspend(struct pci_dev *pdev, uint32_t state) } } + switch(adapter->hw.mac_type) { + case e1000_82573: + swsm = E1000_READ_REG(&adapter->hw, SWSM); + E1000_WRITE_REG(&adapter->hw, SWSM, + swsm & ~E1000_SWSM_DRV_LOAD); + break; + default: + break; + } + pci_disable_device(pdev); state = (state > 0) ? 3 : 0; @@ -3182,7 +3751,7 @@ e1000_resume(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev->priv; - uint32_t manc, ret; + uint32_t manc, ret, swsm; pci_set_power_state(pdev, 0); pci_restore_state(pdev); @@ -3207,10 +3776,19 @@ e1000_resume(struct pci_dev *pdev) E1000_WRITE_REG(&adapter->hw, MANC, manc); } + switch(adapter->hw.mac_type) { + case e1000_82573: + swsm = E1000_READ_REG(&adapter->hw, SWSM); + E1000_WRITE_REG(&adapter->hw, SWSM, + swsm | E1000_SWSM_DRV_LOAD); + break; + default: + break; + } + return 0; } #endif - #ifdef CONFIG_NET_POLL_CONTROLLER /* * Polling 'interrupt' - used by things like netconsole to send skbs diff --git a/drivers/net/e1000/e1000_osdep.h b/drivers/net/e1000/e1000_osdep.h index 2efa3b1b64d..b1915e8eb56 100644 --- a/drivers/net/e1000/e1000_osdep.h +++ b/drivers/net/e1000/e1000_osdep.h @@ -101,6 +101,29 @@ typedef enum { (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \ ((offset) << 2))) +#define E1000_READ_REG_ARRAY_DWORD E1000_READ_REG_ARRAY +#define E1000_WRITE_REG_ARRAY_DWORD E1000_WRITE_REG_ARRAY + +#define E1000_WRITE_REG_ARRAY_WORD(a, reg, offset, value) ( \ + writew((value), ((a)->hw_addr + \ + (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \ + ((offset) << 1)))) + +#define E1000_READ_REG_ARRAY_WORD(a, reg, offset) ( \ + readw((a)->hw_addr + \ + (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \ + ((offset) << 1))) + +#define E1000_WRITE_REG_ARRAY_BYTE(a, reg, offset, value) ( \ + writeb((value), ((a)->hw_addr + \ + (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \ + (offset)))) + +#define E1000_READ_REG_ARRAY_BYTE(a, reg, offset) ( \ + readb((a)->hw_addr + \ + (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \ + (offset))) + #define E1000_WRITE_FLUSH(a) E1000_READ_REG(a, STATUS) #endif /* _E1000_OSDEP_H_ */ -- cgit v1.2.3 From 0e6ef3e02b6f07e37ba1c1abc059f8bee4e0847f Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 28 Apr 2005 19:44:14 -0700 Subject: [PATCH] e1000:Fix Packet Buffer Allocation logic for 82547_rev_2 Fix Packet Buffer Allocation logic for 82547_rev_2 controller Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak diff -up net-drivers-2.6/drivers/net/e1000/e1000_main.c net-drivers-2.6/drivers/net/e1000.new/e1000_main.c --- drivers/net/e1000/e1000_main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 5e6e1f7fd77..13bde909053 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -417,6 +417,7 @@ e1000_reset(struct e1000_adapter *adapter) switch (adapter->hw.mac_type) { case e1000_82547: + case e1000_82547_rev_2: pba = E1000_PBA_30K; break; case e1000_82573: -- cgit v1.2.3 From 1125ecbc0a89db07bb4eb1ba892a23367c3bdeb5 Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 28 Apr 2005 19:44:25 -0700 Subject: [PATCH] e1000:Adjust flow control watermarks for Jumbo Frames Adjust flow control watermarks for Jumbo Frames Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak diff -up net-drivers-2.6/drivers/net/e1000/e1000_main.c net-drivers-2.6/drivers/net/e1000.new/e1000_main.c --- drivers/net/e1000/e1000_main.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 13bde909053..24d96c02b50 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -409,7 +409,10 @@ e1000_down(struct e1000_adapter *adapter) void e1000_reset(struct e1000_adapter *adapter) { + struct net_device *netdev = adapter->netdev; uint32_t pba, manc; + uint16_t fc_high_water_mark = E1000_FC_HIGH_DIFF; + uint16_t fc_low_water_mark = E1000_FC_LOW_DIFF; /* Repartition Pba for greater than 9k mtu * To take effect CTRL.RST is required. @@ -428,6 +431,16 @@ e1000_reset(struct e1000_adapter *adapter) break; } + if((adapter->hw.mac_type != e1000_82573) && + (adapter->rx_buffer_len > E1000_RXBUFFER_8192)) { + pba -= 8; /* allocate more FIFO for Tx */ + /* send an XOFF when there is enough space in the + * Rx FIFO to hold one extra full size Rx packet + */ + fc_high_water_mark = netdev->mtu + ENET_HEADER_SIZE + + ETHERNET_FCS_SIZE + 1; + fc_low_water_mark = fc_high_water_mark + 8; + } if(adapter->hw.mac_type == e1000_82547) { @@ -442,9 +455,9 @@ e1000_reset(struct e1000_adapter *adapter) /* flow control settings */ adapter->hw.fc_high_water = (pba << E1000_PBA_BYTES_SHIFT) - - E1000_FC_HIGH_DIFF; + fc_high_water_mark; adapter->hw.fc_low_water = (pba << E1000_PBA_BYTES_SHIFT) - - E1000_FC_LOW_DIFF; + fc_low_water_mark; adapter->hw.fc_pause_time = E1000_FC_PAUSE_TIME; adapter->hw.fc_send_xon = 1; adapter->hw.fc = adapter->hw.original_fc; -- cgit v1.2.3 From 2648345fcbadfae8e7113112ff9402e465a184dc Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 28 Apr 2005 19:44:46 -0700 Subject: [PATCH] e1000:Driver version,white space,comments,device id Driver version, white space, comments, device id & other Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak diff -up net-drivers-2.6/drivers/net/e1000/e1000_ethtool.c net-drivers-2.6/drivers/net/e1000.new/e1000_ethtool.c --- drivers/net/e1000/e1000.h | 8 +- drivers/net/e1000/e1000_ethtool.c | 24 +++-- drivers/net/e1000/e1000_hw.c | 3 +- drivers/net/e1000/e1000_hw.h | 2 +- drivers/net/e1000/e1000_main.c | 199 +++++++++++++++++--------------------- drivers/net/e1000/e1000_osdep.h | 2 +- drivers/net/e1000/e1000_param.c | 3 +- 7 files changed, 106 insertions(+), 135 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h index 19858c26753..af1e82c5b80 100644 --- a/drivers/net/e1000/e1000.h +++ b/drivers/net/e1000/e1000.h @@ -1,7 +1,7 @@ /******************************************************************************* - Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved. + Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free @@ -139,9 +139,9 @@ struct e1000_adapter; /* How many Rx Buffers do we bundle into one write to the hardware ? */ #define E1000_RX_BUFFER_WRITE 16 /* Must be power of 2 */ -#define AUTO_ALL_MODES 0 -#define E1000_EEPROM_82544_APM 0x0004 -#define E1000_EEPROM_APME 0x0400 +#define AUTO_ALL_MODES 0 +#define E1000_EEPROM_82544_APM 0x0400 +#define E1000_EEPROM_APME 0x0400 #ifndef E1000_MASTER_SLAVE /* Switch to override PHY master/slave setting */ diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index fae58545346..237247f74df 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -1,7 +1,7 @@ /******************************************************************************* - Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved. + Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free @@ -69,6 +69,7 @@ static const struct e1000_stats e1000_gstrings_stats[] = { { "rx_crc_errors", E1000_STAT(net_stats.rx_crc_errors) }, { "rx_frame_errors", E1000_STAT(net_stats.rx_frame_errors) }, { "rx_fifo_errors", E1000_STAT(net_stats.rx_fifo_errors) }, + { "rx_no_buffer_count", E1000_STAT(stats.rnbc) }, { "rx_missed_errors", E1000_STAT(net_stats.rx_missed_errors) }, { "tx_aborted_errors", E1000_STAT(net_stats.tx_aborted_errors) }, { "tx_carrier_errors", E1000_STAT(net_stats.tx_carrier_errors) }, @@ -593,7 +594,7 @@ e1000_set_ringparam(struct net_device *netdev, tx_old = adapter->tx_ring; rx_old = adapter->rx_ring; - if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) + if((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) return -EINVAL; if(netif_running(adapter->netdev)) @@ -784,8 +785,8 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) /* Hook up test interrupt handler just for this test */ if(!request_irq(irq, &e1000_test_intr, 0, netdev->name, netdev)) { shared_int = FALSE; - } else if(request_irq(irq, &e1000_test_intr, SA_SHIRQ, - netdev->name, netdev)){ + } else if(request_irq(irq, &e1000_test_intr, SA_SHIRQ, + netdev->name, netdev)){ *data = 1; return -1; } @@ -842,10 +843,8 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) * test failed. */ adapter->test_icr = 0; - E1000_WRITE_REG(&adapter->hw, IMC, - (~mask & 0x00007FFF)); - E1000_WRITE_REG(&adapter->hw, ICS, - (~mask & 0x00007FFF)); + E1000_WRITE_REG(&adapter->hw, IMC, ~mask & 0x00007FFF); + E1000_WRITE_REG(&adapter->hw, ICS, ~mask & 0x00007FFF); msec_delay(10); if(adapter->test_icr) { @@ -1010,7 +1009,7 @@ e1000_setup_desc_rings(struct e1000_adapter *adapter) struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rxdr, i); struct sk_buff *skb; - if(!(skb = alloc_skb(E1000_RXBUFFER_2048 + NET_IP_ALIGN, + if(!(skb = alloc_skb(E1000_RXBUFFER_2048 + NET_IP_ALIGN, GFP_KERNEL))) { ret_val = 6; goto err_nomem; @@ -1387,13 +1386,12 @@ static int e1000_link_test(struct e1000_adapter *adapter, uint64_t *data) { *data = 0; - if (adapter->hw.media_type == e1000_media_type_internal_serdes) { int i = 0; adapter->hw.serdes_link_down = TRUE; - /* on some blade server designs link establishment */ - /* could take as long as 2-3 minutes. */ + /* On some blade server designs, link establishment + * could take as long as 2-3 minutes */ do { e1000_check_for_link(&adapter->hw); if (adapter->hw.serdes_link_down == FALSE) @@ -1401,7 +1399,7 @@ e1000_link_test(struct e1000_adapter *adapter, uint64_t *data) msec_delay(20); } while (i++ < 3750); - *data = 1; + *data = 1; } else { e1000_check_for_link(&adapter->hw); if(adapter->hw.autoneg) /* if auto_neg is set wait for it */ diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index b7a7ceb67f4..723589b28be 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -1,7 +1,7 @@ /******************************************************************************* - Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved. + Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free @@ -144,7 +144,6 @@ e1000_phy_init_script(struct e1000_hw *hw) DEBUGFUNC("e1000_phy_init_script"); - if(hw->phy_init_script) { msec_delay(20); diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index 1573f608fb6..a0263ee96c6 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -1,7 +1,7 @@ /******************************************************************************* - Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved. + Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 24d96c02b50..325495b8b60 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -1,7 +1,7 @@ /******************************************************************************* - Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved. + Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free @@ -29,33 +29,9 @@ #include "e1000.h" /* Change Log - * 5.3.12 6/7/04 - * - kcompat NETIF_MSG for older kernels (2.4.9) - * - if_mii support and associated kcompat for older kernels - * - More errlogging support from Jon Mason - * - Fix TSO issues on PPC64 machines -- Jon Mason - * - * 5.7.1 12/16/04 - * - Resurrect 82547EI/GI related fix in e1000_intr to avoid deadlocks. This - * fix was removed as it caused system instability. The suspected cause of - * this is the called to e1000_irq_disable in e1000_intr. Inlined the - * required piece of e1000_irq_disable into e1000_intr - Anton Blanchard - * 5.7.0 12/10/04 - * - include fix to the condition that determines when to quit NAPI - Robert Olsson - * - use netif_poll_{disable/enable} to synchronize between NAPI and i/f up/down - * 5.6.5 11/01/04 - * - Enabling NETIF_F_SG without checksum offload is illegal - - John Mason - * 5.6.3 10/26/04 - * - Remove redundant initialization - Jamal Hadi - * - Reset buffer_info->dma in tx resource cleanup logic - * 5.6.2 10/12/04 - * - Avoid filling tx_ring completely - shemminger@osdl.org - * - Replace schedule_timeout() with msleep()/msleep_interruptible() - - * nacc@us.ibm.com - * - Sparse cleanup - shemminger@osdl.org - * - Fix tx resource cleanup logic - * - LLTX support - ak@suse.de and hadi@cyberus.ca + * 6.0.44+ 2/15/05 + * o applied Anton's patch to resolve tx hang in hardware + * o Applied Andrew Mortons patch - e1000 stops working after resume */ char e1000_driver_name[] = "e1000"; @@ -65,7 +41,7 @@ char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver"; #else #define DRIVERNAPI "-NAPI" #endif -#define DRV_VERSION "5.7.6-k2"DRIVERNAPI +#define DRV_VERSION "6.0.54-k2"DRIVERNAPI char e1000_driver_version[] = DRV_VERSION; char e1000_copyright[] = "Copyright (c) 1999-2004 Intel Corporation."; @@ -96,6 +72,7 @@ static struct pci_device_id e1000_pci_tbl[] = { INTEL_E1000_ETHERNET_DEVICE(0x1017), INTEL_E1000_ETHERNET_DEVICE(0x1018), INTEL_E1000_ETHERNET_DEVICE(0x1019), + INTEL_E1000_ETHERNET_DEVICE(0x101A), INTEL_E1000_ETHERNET_DEVICE(0x101D), INTEL_E1000_ETHERNET_DEVICE(0x101E), INTEL_E1000_ETHERNET_DEVICE(0x1026), @@ -110,6 +87,9 @@ static struct pci_device_id e1000_pci_tbl[] = { INTEL_E1000_ETHERNET_DEVICE(0x107B), INTEL_E1000_ETHERNET_DEVICE(0x107C), INTEL_E1000_ETHERNET_DEVICE(0x108A), + INTEL_E1000_ETHERNET_DEVICE(0x108B), + INTEL_E1000_ETHERNET_DEVICE(0x108C), + INTEL_E1000_ETHERNET_DEVICE(0x1099), /* required last entry */ {0,} }; @@ -350,8 +330,11 @@ e1000_up(struct e1000_adapter *adapter) #endif if((err = request_irq(adapter->pdev->irq, &e1000_intr, SA_SHIRQ | SA_SAMPLE_RANDOM, - netdev->name, netdev))) + netdev->name, netdev))) { + DPRINTK(PROBE, ERR, + "Unable to allocate interrupt Error: %d\n", err); return err; + } mod_timer(&adapter->watchdog_timer, jiffies); @@ -636,7 +619,7 @@ e1000_probe(struct pci_dev *pdev, /* copy the MAC address out of the EEPROM */ - if (e1000_read_mac_addr(&adapter->hw)) + if(e1000_read_mac_addr(&adapter->hw)) DPRINTK(PROBE, ERR, "EEPROM Read Error\n"); memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len); @@ -963,12 +946,10 @@ e1000_check_64k_bound(struct e1000_adapter *adapter, unsigned long begin = (unsigned long) start; unsigned long end = begin + len; - /* first rev 82545 and 82546 need to not allow any memory - * write location to cross a 64k boundary due to errata 23 */ + /* First rev 82545 and 82546 need to not allow any memory + * write location to cross 64k boundary due to errata 23 */ if (adapter->hw.mac_type == e1000_82545 || - adapter->hw.mac_type == e1000_82546 ) { - - /* check buffer doesn't cross 64kB */ + adapter->hw.mac_type == e1000_82546) { return ((begin ^ (end - 1)) >> 16) != 0 ? FALSE : TRUE; } @@ -992,8 +973,8 @@ e1000_setup_tx_resources(struct e1000_adapter *adapter) size = sizeof(struct e1000_buffer) * txdr->count; txdr->buffer_info = vmalloc(size); if(!txdr->buffer_info) { - DPRINTK(PROBE, ERR, - "Unable to Allocate Memory for the Transmit descriptor ring\n"); + DPRINTK(PROBE, ERR, + "Unable to allocate memory for the transmit descriptor ring\n"); return -ENOMEM; } memset(txdr->buffer_info, 0, size); @@ -1006,38 +987,38 @@ e1000_setup_tx_resources(struct e1000_adapter *adapter) txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma); if(!txdr->desc) { setup_tx_desc_die: - DPRINTK(PROBE, ERR, - "Unable to Allocate Memory for the Transmit descriptor ring\n"); vfree(txdr->buffer_info); + DPRINTK(PROBE, ERR, + "Unable to allocate memory for the transmit descriptor ring\n"); return -ENOMEM; } - /* fix for errata 23, cant cross 64kB boundary */ + /* Fix for errata 23, can't cross 64kB boundary */ if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) { void *olddesc = txdr->desc; dma_addr_t olddma = txdr->dma; - DPRINTK(TX_ERR,ERR,"txdr align check failed: %u bytes at %p\n", - txdr->size, txdr->desc); - /* try again, without freeing the previous */ + DPRINTK(TX_ERR, ERR, "txdr align check failed: %u bytes " + "at %p\n", txdr->size, txdr->desc); + /* Try again, without freeing the previous */ txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma); - /* failed allocation, critial failure */ if(!txdr->desc) { + /* Failed allocation, critical failure */ pci_free_consistent(pdev, txdr->size, olddesc, olddma); goto setup_tx_desc_die; } if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) { /* give up */ - pci_free_consistent(pdev, txdr->size, - txdr->desc, txdr->dma); + pci_free_consistent(pdev, txdr->size, txdr->desc, + txdr->dma); pci_free_consistent(pdev, txdr->size, olddesc, olddma); DPRINTK(PROBE, ERR, - "Unable to Allocate aligned Memory for the Transmit" - " descriptor ring\n"); + "Unable to allocate aligned memory " + "for the transmit descriptor ring\n"); vfree(txdr->buffer_info); return -ENOMEM; } else { - /* free old, move on with the new one since its okay */ + /* Free old allocation, new allocation was successful */ pci_free_consistent(pdev, txdr->size, olddesc, olddma); } } @@ -1144,8 +1125,8 @@ e1000_setup_rx_resources(struct e1000_adapter *adapter) size = sizeof(struct e1000_buffer) * rxdr->count; rxdr->buffer_info = vmalloc(size); if(!rxdr->buffer_info) { - DPRINTK(PROBE, ERR, - "Unable to Allocate Memory for the Recieve descriptor ring\n"); + DPRINTK(PROBE, ERR, + "Unable to allocate memory for the receive descriptor ring\n"); return -ENOMEM; } memset(rxdr->buffer_info, 0, size); @@ -1185,43 +1166,42 @@ e1000_setup_rx_resources(struct e1000_adapter *adapter) if(!rxdr->desc) { setup_rx_desc_die: - DPRINTK(PROBE, ERR, - "Unble to Allocate Memory for the Recieve descriptor ring\n"); vfree(rxdr->buffer_info); kfree(rxdr->ps_page); kfree(rxdr->ps_page_dma); + DPRINTK(PROBE, ERR, + "Unable to allocate memory for the receive descriptor ring\n"); return -ENOMEM; } - /* fix for errata 23, cant cross 64kB boundary */ + /* Fix for errata 23, can't cross 64kB boundary */ if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) { void *olddesc = rxdr->desc; dma_addr_t olddma = rxdr->dma; - DPRINTK(RX_ERR,ERR, - "rxdr align check failed: %u bytes at %p\n", - rxdr->size, rxdr->desc); - /* try again, without freeing the previous */ + DPRINTK(RX_ERR, ERR, "rxdr align check failed: %u bytes " + "at %p\n", rxdr->size, rxdr->desc); + /* Try again, without freeing the previous */ rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma); - /* failed allocation, critial failure */ if(!rxdr->desc) { + /* Failed allocation, critical failure */ pci_free_consistent(pdev, rxdr->size, olddesc, olddma); goto setup_rx_desc_die; } if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) { /* give up */ - pci_free_consistent(pdev, rxdr->size, - rxdr->desc, rxdr->dma); + pci_free_consistent(pdev, rxdr->size, rxdr->desc, + rxdr->dma); pci_free_consistent(pdev, rxdr->size, olddesc, olddma); - DPRINTK(PROBE, ERR, - "Unable to Allocate aligned Memory for the" - " Receive descriptor ring\n"); + DPRINTK(PROBE, ERR, + "Unable to allocate aligned memory " + "for the receive descriptor ring\n"); vfree(rxdr->buffer_info); kfree(rxdr->ps_page); kfree(rxdr->ps_page_dma); return -ENOMEM; } else { - /* free old, move on with the new one since its okay */ + /* Free old allocation, new allocation was successful */ pci_free_consistent(pdev, rxdr->size, olddesc, olddma); } } @@ -1234,7 +1214,7 @@ setup_rx_desc_die: } /** - * e1000_setup_rctl - configure the receive control register + * e1000_setup_rctl - configure the receive control registers * @adapter: Board private structure **/ @@ -1426,13 +1406,11 @@ static inline void e1000_unmap_and_free_tx_resource(struct e1000_adapter *adapter, struct e1000_buffer *buffer_info) { - struct pci_dev *pdev = adapter->pdev; - if(buffer_info->dma) { - pci_unmap_page(pdev, - buffer_info->dma, - buffer_info->length, - PCI_DMA_TODEVICE); + pci_unmap_page(adapter->pdev, + buffer_info->dma, + buffer_info->length, + PCI_DMA_TODEVICE); buffer_info->dma = 0; } if(buffer_info->skb) { @@ -1457,7 +1435,7 @@ e1000_clean_tx_ring(struct e1000_adapter *adapter) /* Free all the Tx ring sk_buffs */ if (likely(adapter->previous_buffer_info.skb != NULL)) { - e1000_unmap_and_free_tx_resource(adapter, + e1000_unmap_and_free_tx_resource(adapter, &adapter->previous_buffer_info); } @@ -1659,15 +1637,15 @@ e1000_set_multi(struct net_device *netdev) struct e1000_adapter *adapter = netdev->priv; struct e1000_hw *hw = &adapter->hw; struct dev_mc_list *mc_ptr; + unsigned long flags; uint32_t rctl; uint32_t hash_value; int i; - unsigned long flags; - - /* Check for Promiscuous and All Multicast modes */ spin_lock_irqsave(&adapter->tx_lock, flags); + /* Check for Promiscuous and All Multicast modes */ + rctl = E1000_READ_REG(hw, RCTL); if(netdev->flags & IFF_PROMISC) { @@ -1874,7 +1852,7 @@ e1000_watchdog_task(struct e1000_adapter *adapter) /* Cause software interrupt to ensure rx ring is cleaned */ E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_RXDMT0); - /* Force detection of hung controller every watchdog period*/ + /* Force detection of hung controller every watchdog period */ adapter->detect_tx_hung = TRUE; /* Reset the timer */ @@ -2255,7 +2233,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) #ifdef NETIF_F_TSO mss = skb_shinfo(skb)->tso_size; - /* The controller does a simple calculation to + /* The controller does a simple calculation to * make sure there is enough room in the FIFO before * initiating the DMA for each buffer. The calc is: * 4 = ceil(buffer len/mss). To make sure we don't @@ -2268,7 +2246,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) if((mss) || (skb->ip_summed == CHECKSUM_HW)) count++; - count++; /* for sentinel desc */ + count++; #else if(skb->ip_summed == CHECKSUM_HW) count++; @@ -2658,7 +2636,7 @@ e1000_intr(int irq, void *data, struct pt_regs *regs) */ if(hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2){ atomic_inc(&adapter->irq_sem); - E1000_WRITE_REG(&adapter->hw, IMC, ~0); + E1000_WRITE_REG(hw, IMC, ~0); } for(i = 0; i < E1000_MAX_INTR; i++) @@ -2686,7 +2664,7 @@ e1000_clean(struct net_device *netdev, int *budget) int work_to_do = min(*budget, netdev->quota); int tx_cleaned; int work_done = 0; - + tx_cleaned = e1000_clean_tx_irq(adapter); adapter->clean_rx(adapter, &work_done, work_to_do); @@ -2776,9 +2754,9 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter) netif_wake_queue(netdev); spin_unlock(&adapter->tx_lock); - if(adapter->detect_tx_hung) { - /* detect a transmit hang in hardware, this serializes the + + /* Detect a transmit hang in hardware, this serializes the * check with the clearing of time_stamp and movement of i */ adapter->detect_tx_hung = FALSE; if (tx_ring->buffer_info[i].dma && @@ -2923,7 +2901,7 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter) if(unlikely(!(rx_desc->status & E1000_RXD_STAT_EOP))) { /* All receives must fit into a single buffer */ E1000_DBG("%s: Receive packet consumed multiple" - " buffers\n", netdev->name); + " buffers\n", netdev->name); dev_kfree_skb_irq(skb); goto next_desc; } @@ -3130,43 +3108,43 @@ e1000_alloc_rx_buffers(struct e1000_adapter *adapter) struct e1000_rx_desc *rx_desc; struct e1000_buffer *buffer_info; struct sk_buff *skb; - unsigned int i, bufsz; + unsigned int i; + unsigned int bufsz = adapter->rx_buffer_len + NET_IP_ALIGN; i = rx_ring->next_to_use; buffer_info = &rx_ring->buffer_info[i]; while(!buffer_info->skb) { - bufsz = adapter->rx_buffer_len + NET_IP_ALIGN; - skb = dev_alloc_skb(bufsz); + if(unlikely(!skb)) { /* Better luck next round */ break; } - /* fix for errata 23, cant cross 64kB boundary */ + /* Fix for errata 23, can't cross 64kB boundary */ if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) { struct sk_buff *oldskb = skb; - DPRINTK(RX_ERR,ERR, - "skb align check failed: %u bytes at %p\n", - bufsz, skb->data); - /* try again, without freeing the previous */ + DPRINTK(RX_ERR, ERR, "skb align check failed: %u bytes " + "at %p\n", bufsz, skb->data); + /* Try again, without freeing the previous */ skb = dev_alloc_skb(bufsz); + /* Failed allocation, critical failure */ if (!skb) { dev_kfree_skb(oldskb); break; } + if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) { /* give up */ dev_kfree_skb(skb); dev_kfree_skb(oldskb); break; /* while !buffer_info->skb */ } else { - /* move on with the new one */ + /* Use new allocation */ dev_kfree_skb(oldskb); } } - /* Make buffer alignment 2 beyond a 16 byte boundary * this will result in a 16 byte aligned IP header after * the 14 byte MAC header is removed @@ -3182,25 +3160,23 @@ e1000_alloc_rx_buffers(struct e1000_adapter *adapter) adapter->rx_buffer_len, PCI_DMA_FROMDEVICE); - /* fix for errata 23, cant cross 64kB boundary */ - if(!e1000_check_64k_bound(adapter, - (void *)(unsigned long)buffer_info->dma, - adapter->rx_buffer_len)) { - DPRINTK(RX_ERR,ERR, - "dma align check failed: %u bytes at %ld\n", - adapter->rx_buffer_len, (unsigned long)buffer_info->dma); - + /* Fix for errata 23, can't cross 64kB boundary */ + if (!e1000_check_64k_bound(adapter, + (void *)(unsigned long)buffer_info->dma, + adapter->rx_buffer_len)) { + DPRINTK(RX_ERR, ERR, + "dma align check failed: %u bytes at %p\n", + adapter->rx_buffer_len, + (void *)(unsigned long)buffer_info->dma); dev_kfree_skb(skb); buffer_info->skb = NULL; - pci_unmap_single(pdev, - buffer_info->dma, + pci_unmap_single(pdev, buffer_info->dma, adapter->rx_buffer_len, PCI_DMA_FROMDEVICE); break; /* while !buffer_info->skb */ } - rx_desc = E1000_RX_DESC(*rx_ring, i); rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma); @@ -3210,7 +3186,6 @@ e1000_alloc_rx_buffers(struct e1000_adapter *adapter) * applicable for weak-ordered memory model archs, * such as IA-64). */ wmb(); - E1000_WRITE_REG(&adapter->hw, RDT, i); } @@ -3483,9 +3458,10 @@ void e1000_pci_set_mwi(struct e1000_hw *hw) { struct e1000_adapter *adapter = hw->back; + int ret_val = pci_set_mwi(adapter->pdev); - int ret; - ret = pci_set_mwi(adapter->pdev); + if(ret_val) + DPRINTK(PROBE, ERR, "Error in setting MWI\n"); } void @@ -3643,8 +3619,7 @@ e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx) break; case SPEED_1000 + DUPLEX_HALF: /* not supported */ default: - DPRINTK(PROBE, ERR, - "Unsupported Speed/Duplexity configuration\n"); + DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n"); return -EINVAL; } return 0; @@ -3810,7 +3785,7 @@ e1000_resume(struct pci_dev *pdev) * the interrupt routine is executing. */ static void -e1000_netpoll (struct net_device *netdev) +e1000_netpoll(struct net_device *netdev) { struct e1000_adapter *adapter = netdev->priv; disable_irq(adapter->pdev->irq); diff --git a/drivers/net/e1000/e1000_osdep.h b/drivers/net/e1000/e1000_osdep.h index b1915e8eb56..aac64de6143 100644 --- a/drivers/net/e1000/e1000_osdep.h +++ b/drivers/net/e1000/e1000_osdep.h @@ -1,7 +1,7 @@ /******************************************************************************* - Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved. + Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c index e914d09fe6f..676247f9f1c 100644 --- a/drivers/net/e1000/e1000_param.c +++ b/drivers/net/e1000/e1000_param.c @@ -1,7 +1,7 @@ /******************************************************************************* - Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved. + Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free @@ -478,7 +478,6 @@ e1000_check_options(struct e1000_adapter *adapter) DPRINTK(PROBE, INFO, "%s set to dynamic mode\n", opt.name); break; - case -1: default: e1000_validate_option(&adapter->itr, &opt, adapter); -- cgit v1.2.3 From 5633684d008b777ab169e8efcef39a898482f531 Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 28 Apr 2005 18:45:50 -0700 Subject: [PATCH] ixgb: Fix multi-cast packet count in statistics Fix multi-cast packet count in statistics Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak diff -up net-drivers-2.6/drivers/net/ixgb/ixgb_main.c net-drivers-2.6/drivers/net/ixgb.new/ixgb_main.c --- drivers/net/ixgb/ixgb_main.c | 27 +++++++++++++++++++++++---- 1 file changed, 23 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c index 7d26623d859..1498b4e4246 100644 --- a/drivers/net/ixgb/ixgb_main.c +++ b/drivers/net/ixgb/ixgb_main.c @@ -1526,14 +1526,33 @@ ixgb_change_mtu(struct net_device *netdev, int new_mtu) void ixgb_update_stats(struct ixgb_adapter *adapter) { + struct net_device *netdev = adapter->netdev; + + if((netdev->flags & IFF_PROMISC) || (netdev->flags & IFF_ALLMULTI) || + (netdev->mc_count > IXGB_MAX_NUM_MULTICAST_ADDRESSES)) { + u64 multi = IXGB_READ_REG(&adapter->hw, MPRCL); + u32 bcast_l = IXGB_READ_REG(&adapter->hw, BPRCL); + u32 bcast_h = IXGB_READ_REG(&adapter->hw, BPRCH); + u64 bcast = ((u64)bcast_h << 32) | bcast_l; + + multi |= ((u64)IXGB_READ_REG(&adapter->hw, MPRCH) << 32); + /* fix up multicast stats by removing broadcasts */ + multi -= bcast; + + adapter->stats.mprcl += (multi & 0xFFFFFFFF); + adapter->stats.mprch += (multi >> 32); + adapter->stats.bprcl += bcast_l; + adapter->stats.bprch += bcast_h; + } else { + adapter->stats.mprcl += IXGB_READ_REG(&adapter->hw, MPRCL); + adapter->stats.mprch += IXGB_READ_REG(&adapter->hw, MPRCH); + adapter->stats.bprcl += IXGB_READ_REG(&adapter->hw, BPRCL); + adapter->stats.bprch += IXGB_READ_REG(&adapter->hw, BPRCH); + } adapter->stats.tprl += IXGB_READ_REG(&adapter->hw, TPRL); adapter->stats.tprh += IXGB_READ_REG(&adapter->hw, TPRH); adapter->stats.gprcl += IXGB_READ_REG(&adapter->hw, GPRCL); adapter->stats.gprch += IXGB_READ_REG(&adapter->hw, GPRCH); - adapter->stats.bprcl += IXGB_READ_REG(&adapter->hw, BPRCL); - adapter->stats.bprch += IXGB_READ_REG(&adapter->hw, BPRCH); - adapter->stats.mprcl += IXGB_READ_REG(&adapter->hw, MPRCL); - adapter->stats.mprch += IXGB_READ_REG(&adapter->hw, MPRCH); adapter->stats.uprcl += IXGB_READ_REG(&adapter->hw, UPRCL); adapter->stats.uprch += IXGB_READ_REG(&adapter->hw, UPRCH); adapter->stats.vprcl += IXGB_READ_REG(&adapter->hw, VPRCL); -- cgit v1.2.3 From 06c2f9ecb5b53f9d4fc1ef596da16683cc4af5ba Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 28 Apr 2005 18:46:51 -0700 Subject: [PATCH] ixgb: Do not set the RS bit on context descriptors Don't set the RS bit on context descriptors, causes un-necessary bus activity Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak diff -up net-drivers-2.6/drivers/net/ixgb/ixgb_main.c net-drivers-2.6/drivers/net/ixgb.new/ixgb_main.c --- drivers/net/ixgb/ixgb_main.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c index 1498b4e4246..364a9e78b0c 100644 --- a/drivers/net/ixgb/ixgb_main.c +++ b/drivers/net/ixgb/ixgb_main.c @@ -1209,10 +1209,10 @@ ixgb_tso(struct ixgb_adapter *adapter, struct sk_buff *skb) | IXGB_CONTEXT_DESC_CMD_TSE | IXGB_CONTEXT_DESC_CMD_IP | IXGB_CONTEXT_DESC_CMD_TCP - | IXGB_CONTEXT_DESC_CMD_RS | IXGB_CONTEXT_DESC_CMD_IDE | (skb->len - (hdr_len))); + if(++i == adapter->tx_ring.count) i = 0; adapter->tx_ring.next_to_use = i; @@ -1247,8 +1247,7 @@ ixgb_tx_csum(struct ixgb_adapter *adapter, struct sk_buff *skb) context_desc->mss = 0; context_desc->cmd_type_len = cpu_to_le32(IXGB_CONTEXT_DESC_TYPE - | IXGB_TX_DESC_CMD_RS - | IXGB_TX_DESC_CMD_IDE); + | IXGB_TX_DESC_CMD_IDE); if(++i == adapter->tx_ring.count) i = 0; adapter->tx_ring.next_to_use = i; -- cgit v1.2.3 From 0c73f58636385a4d3dc68d0d0829d4c39d61b621 Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 28 Apr 2005 18:48:06 -0700 Subject: [PATCH] ixgb: Change RDT write bump size to 4 Change RDT write bump size back to 4 Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak diff -up net-drivers-2.6/drivers/net/ixgb/ixgb.h net-drivers-2.6/drivers/net/ixgb.new/ixgb.h --- drivers/net/ixgb/ixgb.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ixgb/ixgb.h b/drivers/net/ixgb/ixgb.h index 26c4f15f7fc..f8d3385c784 100644 --- a/drivers/net/ixgb/ixgb.h +++ b/drivers/net/ixgb/ixgb.h @@ -110,7 +110,7 @@ struct ixgb_adapter; #define IXGB_TX_QUEUE_WAKE 16 /* How many Rx Buffers do we bundle into one write to the hardware ? */ -#define IXGB_RX_BUFFER_WRITE 16 /* Must be power of 2 */ +#define IXGB_RX_BUFFER_WRITE 4 /* Must be power of 2 */ /* only works for sizes that are powers of 2 */ #define IXGB_ROUNDUP(i, size) ((i) = (((i) + (size) - 1) & ~((size) - 1))) -- cgit v1.2.3 From 6dfbb6dd391139be9f1cd333877c6e2b03da4bba Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 28 Apr 2005 18:56:40 -0700 Subject: [PATCH] ixgb: Mask RXO interrupt Disable RXO interrupt to decrease recovery time when system is overloaded with data Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak diff -up net-drivers-2.6/drivers/net/ixgb/ixgb_main.c net-drivers-2.6/drivers/net/ixgb.new/ixgb_main.c --- drivers/net/ixgb/ixgb_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c index 364a9e78b0c..da6b9d6e6db 100644 --- a/drivers/net/ixgb/ixgb_main.c +++ b/drivers/net/ixgb/ixgb_main.c @@ -224,8 +224,8 @@ ixgb_irq_enable(struct ixgb_adapter *adapter) { if(atomic_dec_and_test(&adapter->irq_sem)) { IXGB_WRITE_REG(&adapter->hw, IMS, - IXGB_INT_RXT0 | IXGB_INT_RXDMT0 | IXGB_INT_TXDW | - IXGB_INT_RXO | IXGB_INT_LSC); + IXGB_INT_RXT0 | IXGB_INT_RXDMT0 | IXGB_INT_TXDW | + IXGB_INT_LSC); IXGB_WRITE_FLUSH(&adapter->hw); } } -- cgit v1.2.3 From 41639fed1b32dde4ea3d94242a89308435d341be Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 28 Apr 2005 18:51:54 -0700 Subject: [PATCH] ixgb: Reset status in the Rx Reset status in the Rx descriptor prior to handing it to the controller. Leave three Rx descriptors unused Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak diff -up net-drivers-2.6/drivers/net/ixgb/ixgb_main.c net-drivers-2.6/drivers/net/ixgb.new/ixgb_main.c --- drivers/net/ixgb/ixgb_main.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c index da6b9d6e6db..a6a13f6fe65 100644 --- a/drivers/net/ixgb/ixgb_main.c +++ b/drivers/net/ixgb/ixgb_main.c @@ -1977,8 +1977,8 @@ ixgb_alloc_rx_buffers(struct ixgb_adapter *adapter) num_group_tail_writes = IXGB_RX_BUFFER_WRITE; - /* leave one descriptor unused */ - while(--cleancount > 0) { + /* leave three descriptors unused */ + while(--cleancount > 2) { rx_desc = IXGB_RX_DESC(*rx_ring, i); skb = dev_alloc_skb(adapter->rx_buffer_len + NET_IP_ALIGN); @@ -2005,6 +2005,10 @@ ixgb_alloc_rx_buffers(struct ixgb_adapter *adapter) PCI_DMA_FROMDEVICE); rx_desc->buff_addr = cpu_to_le64(buffer_info->dma); + /* guarantee DD bit not set now before h/w gets descriptor + * this is the rest of the workaround for h/w double + * writeback. */ + rx_desc->status = 0; if((i & ~(num_group_tail_writes- 1)) == i) { /* Force memory writes to complete before letting h/w -- cgit v1.2.3 From abf481d6af8670c89f33f354c6fbd9977b23cebc Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 28 Apr 2005 19:03:32 -0700 Subject: [PATCH] ixgb: Fix EEPROM functions to be endian-aware Fix EEPROM functions to be endian-aware Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak diff -up net-drivers-2.6/drivers/net/ixgb/ixgb_ee.c net-drivers-2.6/drivers/net/ixgb.new/ixgb_ee.c --- drivers/net/ixgb/ixgb_ee.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ixgb/ixgb_ee.c b/drivers/net/ixgb/ixgb_ee.c index 653e99f919c..3aae110c556 100644 --- a/drivers/net/ixgb/ixgb_ee.c +++ b/drivers/net/ixgb/ixgb_ee.c @@ -411,7 +411,7 @@ ixgb_write_eeprom(struct ixgb_hw *hw, uint16_t offset, uint16_t data) ixgb_cleanup_eeprom(hw); /* clear the init_ctrl_reg_1 to signify that the cache is invalidated */ - ee_map->init_ctrl_reg_1 = EEPROM_ICW1_SIGNATURE_CLEAR; + ee_map->init_ctrl_reg_1 = le16_to_cpu(EEPROM_ICW1_SIGNATURE_CLEAR); return; } @@ -483,7 +483,7 @@ ixgb_get_eeprom_data(struct ixgb_hw *hw) DEBUGOUT("ixgb_ee: Checksum invalid.\n"); /* clear the init_ctrl_reg_1 to signify that the cache is * invalidated */ - ee_map->init_ctrl_reg_1 = EEPROM_ICW1_SIGNATURE_CLEAR; + ee_map->init_ctrl_reg_1 = le16_to_cpu(EEPROM_ICW1_SIGNATURE_CLEAR); return (FALSE); } @@ -579,7 +579,7 @@ ixgb_get_ee_compatibility(struct ixgb_hw *hw) struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return(ee_map->compatibility); + return (le16_to_cpu(ee_map->compatibility)); return(0); } @@ -616,7 +616,7 @@ ixgb_get_ee_init_ctrl_reg_1(struct ixgb_hw *hw) struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return(ee_map->init_ctrl_reg_1); + return (le16_to_cpu(ee_map->init_ctrl_reg_1)); return(0); } @@ -635,7 +635,7 @@ ixgb_get_ee_init_ctrl_reg_2(struct ixgb_hw *hw) struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return(ee_map->init_ctrl_reg_2); + return (le16_to_cpu(ee_map->init_ctrl_reg_2)); return(0); } @@ -654,7 +654,7 @@ ixgb_get_ee_subsystem_id(struct ixgb_hw *hw) struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return(ee_map->subsystem_id); + return (le16_to_cpu(ee_map->subsystem_id)); return(0); } @@ -673,7 +673,7 @@ ixgb_get_ee_subvendor_id(struct ixgb_hw *hw) struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return(ee_map->subvendor_id); + return (le16_to_cpu(ee_map->subvendor_id)); return(0); } @@ -692,7 +692,7 @@ ixgb_get_ee_device_id(struct ixgb_hw *hw) struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return(ee_map->device_id); + return (le16_to_cpu(ee_map->device_id)); return(0); } @@ -711,7 +711,7 @@ ixgb_get_ee_vendor_id(struct ixgb_hw *hw) struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return(ee_map->vendor_id); + return (le16_to_cpu(ee_map->vendor_id)); return(0); } @@ -730,7 +730,7 @@ ixgb_get_ee_swdpins_reg(struct ixgb_hw *hw) struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return(ee_map->swdpins_reg); + return (le16_to_cpu(ee_map->swdpins_reg)); return(0); } @@ -749,7 +749,7 @@ ixgb_get_ee_d3_power(struct ixgb_hw *hw) struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return(ee_map->d3_power); + return (le16_to_cpu(ee_map->d3_power)); return(0); } @@ -768,7 +768,7 @@ ixgb_get_ee_d0_power(struct ixgb_hw *hw) struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return(ee_map->d0_power); + return (le16_to_cpu(ee_map->d0_power)); return(0); } -- cgit v1.2.3 From 5e3c30deb21d0eb0da44830fb1c1fc7054e54229 Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 28 Apr 2005 19:04:07 -0700 Subject: [PATCH] ixgb: Support for ethtool -d ixgb support for ethtool -d Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak diff -up net-drivers-2.6/drivers/net/ixgb/ixgb_ethtool.c net-drivers-2.6/drivers/net/ixgb.new/ixgb_ethtool.c --- drivers/net/ixgb/ixgb_ethtool.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c index aea10e8aaa7..3fa113854ee 100644 --- a/drivers/net/ixgb/ixgb_ethtool.c +++ b/drivers/net/ixgb/ixgb_ethtool.c @@ -252,7 +252,9 @@ ixgb_get_regs(struct net_device *netdev, uint32_t *reg_start = reg; uint8_t i; - regs->version = (adapter->hw.device_id << 16) | adapter->hw.subsystem_id; + /* the 1 (one) below indicates an attempt at versioning, if the + * interface in ethtool or the driver this 1 should be incremented */ + regs->version = (1<<24) | hw->revision_id << 16 | hw->device_id; /* General Registers */ *reg++ = IXGB_READ_REG(hw, CTRL0); /* 0 */ -- cgit v1.2.3 From c2eba932b14718e34ac2609e35c6d41e032a2478 Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 28 Apr 2005 19:04:32 -0700 Subject: [PATCH] ixgb: Remove hook for suspend, no power management Remove hook for suspend. No power management in 10GbE Controllers Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak diff -up net-drivers-2.6/drivers/net/ixgb/ixgb_main.c net-drivers-2.6/drivers/net/ixgb.new/ixgb_main.c --- drivers/net/ixgb/ixgb_main.c | 75 +++----------------------------------------- 1 file changed, 4 insertions(+), 71 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c index a6a13f6fe65..0a0f0417f85 100644 --- a/drivers/net/ixgb/ixgb_main.c +++ b/drivers/net/ixgb/ixgb_main.c @@ -120,33 +120,20 @@ static void ixgb_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid); static void ixgb_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid); static void ixgb_restore_vlan(struct ixgb_adapter *adapter); -static int ixgb_notify_reboot(struct notifier_block *, unsigned long event, - void *ptr); -static int ixgb_suspend(struct pci_dev *pdev, uint32_t state); - #ifdef CONFIG_NET_POLL_CONTROLLER /* for netdump / net console */ static void ixgb_netpoll(struct net_device *dev); #endif -struct notifier_block ixgb_notifier_reboot = { - .notifier_call = ixgb_notify_reboot, - .next = NULL, - .priority = 0 -}; - /* Exported from other modules */ extern void ixgb_check_options(struct ixgb_adapter *adapter); static struct pci_driver ixgb_driver = { - .name = ixgb_driver_name, + .name = ixgb_driver_name, .id_table = ixgb_pci_tbl, - .probe = ixgb_probe, - .remove = __devexit_p(ixgb_remove), - /* Power Managment Hooks */ - .suspend = NULL, - .resume = NULL + .probe = ixgb_probe, + .remove = __devexit_p(ixgb_remove), }; MODULE_AUTHOR("Intel Corporation, "); @@ -169,17 +156,12 @@ MODULE_LICENSE("GPL"); static int __init ixgb_init_module(void) { - int ret; printk(KERN_INFO "%s - version %s\n", ixgb_driver_string, ixgb_driver_version); printk(KERN_INFO "%s\n", ixgb_copyright); - ret = pci_module_init(&ixgb_driver); - if(ret >= 0) { - register_reboot_notifier(&ixgb_notifier_reboot); - } - return ret; + return pci_module_init(&ixgb_driver); } module_init(ixgb_init_module); @@ -194,7 +176,6 @@ module_init(ixgb_init_module); static void __exit ixgb_exit_module(void) { - unregister_reboot_notifier(&ixgb_notifier_reboot); pci_unregister_driver(&ixgb_driver); } @@ -2121,54 +2102,6 @@ ixgb_restore_vlan(struct ixgb_adapter *adapter) } } -/** - * ixgb_notify_reboot - handles OS notification of reboot event. - * @param nb notifier block, unused - * @param event Event being passed to driver to act upon - * @param p A pointer to our net device - **/ -static int -ixgb_notify_reboot(struct notifier_block *nb, unsigned long event, void *p) -{ - struct pci_dev *pdev = NULL; - - switch(event) { - case SYS_DOWN: - case SYS_HALT: - case SYS_POWER_OFF: - while ((pdev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pdev))) { - if (pci_dev_driver(pdev) == &ixgb_driver) - ixgb_suspend(pdev, 3); - } - } - return NOTIFY_DONE; -} - -/** - * ixgb_suspend - driver suspend function called from notify. - * @param pdev pci driver structure used for passing to - * @param state power state to enter - **/ -static int -ixgb_suspend(struct pci_dev *pdev, uint32_t state) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct ixgb_adapter *adapter = netdev->priv; - - netif_device_detach(netdev); - - if(netif_running(netdev)) - ixgb_down(adapter, TRUE); - - pci_save_state(pdev); - - state = (state > 0) ? 3 : 0; - pci_set_power_state(pdev, state); - msec_delay(200); - - return 0; -} - #ifdef CONFIG_NET_POLL_CONTROLLER /* * Polling 'interrupt' - used by things like netconsole to send skbs -- cgit v1.2.3 From f404de1cd407c1f56fa478810c6c48e015d377bd Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 28 Apr 2005 19:04:54 -0700 Subject: [PATCH] ixgb: Code optimization Code optimization Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak diff -up net-drivers-2.6/drivers/net/ixgb/ixgb_main.c net-drivers-2.6/drivers/net/ixgb.new/ixgb_main.c --- drivers/net/ixgb/ixgb_main.c | 28 ++++++++++++---------------- 1 file changed, 12 insertions(+), 16 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c index 0a0f0417f85..db1089c67eb 100644 --- a/drivers/net/ixgb/ixgb_main.c +++ b/drivers/net/ixgb/ixgb_main.c @@ -1822,7 +1822,6 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter) struct pci_dev *pdev = adapter->pdev; struct ixgb_rx_desc *rx_desc, *next_rxd; struct ixgb_buffer *buffer_info, *next_buffer, *next2_buffer; - struct sk_buff *skb, *next_skb; uint32_t length; unsigned int i, j; boolean_t cleaned = FALSE; @@ -1832,6 +1831,8 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter) buffer_info = &rx_ring->buffer_info[i]; while(rx_desc->status & IXGB_RX_DESC_STATUS_DD) { + struct sk_buff *skb, *next_skb; + u8 status; #ifdef CONFIG_IXGB_NAPI if(*work_done >= work_to_do) @@ -1839,7 +1840,9 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter) (*work_done)++; #endif + status = rx_desc->status; skb = buffer_info->skb; + prefetch(skb->data); if(++i == rx_ring->count) i = 0; @@ -1864,7 +1867,7 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter) length = le16_to_cpu(rx_desc->length); - if(unlikely(!(rx_desc->status & IXGB_RX_DESC_STATUS_EOP))) { + if(unlikely(!(status & IXGB_RX_DESC_STATUS_EOP))) { /* All receives must fit into a single buffer */ @@ -1872,12 +1875,7 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter) "length<%x>\n", length); dev_kfree_skb_irq(skb); - rx_desc->status = 0; - buffer_info->skb = NULL; - - rx_desc = next_rxd; - buffer_info = next_buffer; - continue; + goto rxdesc_done; } if (unlikely(rx_desc->errors @@ -1886,12 +1884,7 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter) IXGB_RX_DESC_ERRORS_RXE))) { dev_kfree_skb_irq(skb); - rx_desc->status = 0; - buffer_info->skb = NULL; - - rx_desc = next_rxd; - buffer_info = next_buffer; - continue; + goto rxdesc_done; } /* Good Receive */ @@ -1902,7 +1895,7 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter) skb->protocol = eth_type_trans(skb, netdev); #ifdef CONFIG_IXGB_NAPI - if(adapter->vlgrp && (rx_desc->status & IXGB_RX_DESC_STATUS_VP)) { + if(adapter->vlgrp && (status & IXGB_RX_DESC_STATUS_VP)) { vlan_hwaccel_receive_skb(skb, adapter->vlgrp, le16_to_cpu(rx_desc->special) & IXGB_RX_DESC_SPECIAL_VLAN_MASK); @@ -1910,7 +1903,7 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter) netif_receive_skb(skb); } #else /* CONFIG_IXGB_NAPI */ - if(adapter->vlgrp && (rx_desc->status & IXGB_RX_DESC_STATUS_VP)) { + if(adapter->vlgrp && (status & IXGB_RX_DESC_STATUS_VP)) { vlan_hwaccel_rx(skb, adapter->vlgrp, le16_to_cpu(rx_desc->special) & IXGB_RX_DESC_SPECIAL_VLAN_MASK); @@ -1920,9 +1913,12 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter) #endif /* CONFIG_IXGB_NAPI */ netdev->last_rx = jiffies; +rxdesc_done: + /* clean up descriptor, might be written over by hw */ rx_desc->status = 0; buffer_info->skb = NULL; + /* use prefetched values */ rx_desc = next_rxd; buffer_info = next_buffer; } -- cgit v1.2.3 From 37d16f823799918107440cb9e552b0709347f77c Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 28 Apr 2005 19:05:12 -0700 Subject: [PATCH] ixgb: Fixed msec_delay in osdep to use msleep Fixed msec_delay in osdep to use msleep Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak diff -up net-drivers-2.6/drivers/net/ixgb/ixgb_osdep.h net-drivers-2.6/drivers/net/ixgb.new/ixgb_osdep.h --- drivers/net/ixgb/ixgb_osdep.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ixgb/ixgb_osdep.h b/drivers/net/ixgb/ixgb_osdep.h index 9eba9289190..dba20481ee8 100644 --- a/drivers/net/ixgb/ixgb_osdep.h +++ b/drivers/net/ixgb/ixgb_osdep.h @@ -45,8 +45,7 @@ /* Don't mdelay in interrupt context! */ \ BUG(); \ } else { \ - set_current_state(TASK_UNINTERRUPTIBLE); \ - schedule_timeout((x * HZ)/1000 + 2); \ + msleep(x); \ } } while(0) #endif -- cgit v1.2.3 From ac79c82e793bc2440c4765e5eb1b834d2c18edf2 Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 28 Apr 2005 19:05:32 -0700 Subject: [PATCH] ixgb: Driver version, white space, comments, device id Driver version, white space, comments, device id & other Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak diff -up net-drivers-2.6/drivers/net/ixgb/ixgb_main.c net-drivers-2.6/drivers/net/ixgb.new/ixgb_main.c --- drivers/net/ixgb/ixgb_main.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c index db1089c67eb..35f6a7c271a 100644 --- a/drivers/net/ixgb/ixgb_main.c +++ b/drivers/net/ixgb/ixgb_main.c @@ -47,7 +47,7 @@ char ixgb_driver_string[] = "Intel(R) PRO/10GbE Network Driver"; #else #define DRIVERNAPI "-NAPI" #endif -char ixgb_driver_version[] = "1.0.90-k2"DRIVERNAPI; +char ixgb_driver_version[] = "1.0.95-k2"DRIVERNAPI; char ixgb_copyright[] = "Copyright (c) 1999-2005 Intel Corporation."; /* ixgb_pci_tbl - PCI Device ID Table @@ -103,6 +103,7 @@ static int ixgb_change_mtu(struct net_device *netdev, int new_mtu); static int ixgb_set_mac(struct net_device *netdev, void *p); static irqreturn_t ixgb_intr(int irq, void *data, struct pt_regs *regs); static boolean_t ixgb_clean_tx_irq(struct ixgb_adapter *adapter); + #ifdef CONFIG_IXGB_NAPI static int ixgb_clean(struct net_device *netdev, int *budget); static boolean_t ixgb_clean_rx_irq(struct ixgb_adapter *adapter, @@ -1253,6 +1254,7 @@ ixgb_tx_map(struct ixgb_adapter *adapter, struct sk_buff *skb, unsigned int nr_frags = skb_shinfo(skb)->nr_frags; unsigned int f; + len -= skb->data_len; i = tx_ring->next_to_use; @@ -1857,7 +1859,6 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter) next_skb = next_buffer->skb; prefetch(next_skb); - cleaned = TRUE; pci_unmap_single(pdev, @@ -2108,6 +2109,7 @@ ixgb_restore_vlan(struct ixgb_adapter *adapter) static void ixgb_netpoll(struct net_device *dev) { struct ixgb_adapter *adapter = dev->priv; + disable_irq(adapter->pdev->irq); ixgb_intr(adapter->pdev->irq, dev, NULL); enable_irq(adapter->pdev->irq); -- cgit v1.2.3 From 2acdb1e05c1a92e05ee710ed8f226a8f3183d5a0 Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 28 Apr 2005 19:16:58 -0700 Subject: [PATCH] e100: Execute tx_timeout task outside interrupt context Execute tx_timeout task outside the interrupt context Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak --- drivers/net/e100.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 1b68dd5a49b..0f2837ebaab 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -539,6 +539,7 @@ struct nic { struct timer_list watchdog; struct timer_list blink_timer; struct mii_if_info mii; + struct work_struct tx_timeout_task; enum loopback loopback; struct mem *mem; @@ -1716,6 +1717,15 @@ static void e100_tx_timeout(struct net_device *netdev) { struct nic *nic = netdev_priv(netdev); + /* Reset outside of interrupt context, to avoid request_irq + * in interrupt context */ + schedule_work(&nic->tx_timeout_task); +} + +static void e100_tx_timeout_task(struct net_device *netdev) +{ + struct nic *nic = netdev_priv(netdev); + DPRINTK(TX_ERR, DEBUG, "scb.status=0x%02X\n", readb(&nic->csr->scb.status)); e100_down(netdev_priv(netdev)); @@ -2240,6 +2250,9 @@ static int __devinit e100_probe(struct pci_dev *pdev, nic->blink_timer.function = e100_blink_led; nic->blink_timer.data = (unsigned long)nic; + INIT_WORK(&nic->tx_timeout_task, + (void (*)(void *))e100_tx_timeout_task, netdev); + if((err = e100_alloc(nic))) { DPRINTK(PROBE, ERR, "Cannot alloc driver memory, aborting.\n"); goto err_out_iounmap; -- cgit v1.2.3 From 1f53367d5d75ba37f258f6e955d6fc24814051a0 Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 28 Apr 2005 19:17:20 -0700 Subject: [PATCH] e100: Render e100 NAPI state machine Render e100 NAPI state machine to be similar to the non-NAPI one. Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak --- drivers/net/e100.c | 86 ++++++++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 71 insertions(+), 15 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 0f2837ebaab..2c8c14ebf20 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -269,6 +269,12 @@ enum scb_status { rus_mask = 0x3C, }; +enum ru_state { + RU_SUSPENDED = 0, + RU_RUNNING = 1, + RU_UNINITIALIZED = -1, +}; + enum scb_stat_ack { stat_ack_not_ours = 0x00, stat_ack_sw_gen = 0x04, @@ -510,7 +516,7 @@ struct nic { struct rx *rx_to_use; struct rx *rx_to_clean; struct rfd blank_rfd; - int ru_running; + enum ru_state ru_running; spinlock_t cb_lock ____cacheline_aligned; spinlock_t cmd_lock; @@ -1204,7 +1210,9 @@ static void e100_update_stats(struct nic *nic) } } - e100_exec_cmd(nic, cuc_dump_reset, 0); + + if(e100_exec_cmd(nic, cuc_dump_reset, 0)) + DPRINTK(TX_ERR, DEBUG, "exec cuc_dump_reset failed\n"); } static void e100_adjust_adaptive_ifs(struct nic *nic, int speed, int duplex) @@ -1298,7 +1306,8 @@ static int e100_xmit_frame(struct sk_buff *skb, struct net_device *netdev) /* SW workaround for ICH[x] 10Mbps/half duplex Tx hang. Issue a NOP command followed by a 1us delay before issuing the Tx command. */ - e100_exec_cmd(nic, cuc_nop, 0); + if(e100_exec_cmd(nic, cuc_nop, 0)) + DPRINTK(TX_ERR, DEBUG, "exec cuc_nop failed\n"); udelay(1); } @@ -1416,12 +1425,18 @@ static int e100_alloc_cbs(struct nic *nic) return 0; } -static inline void e100_start_receiver(struct nic *nic) +static inline void e100_start_receiver(struct nic *nic, struct rx *rx) { + if(!nic->rxs) return; + if(RU_SUSPENDED != nic->ru_running) return; + + /* handle init time starts */ + if(!rx) rx = nic->rxs; + /* (Re)start RU if suspended or idle and RFA is non-NULL */ - if(!nic->ru_running && nic->rx_to_clean->skb) { - e100_exec_cmd(nic, ruc_start, nic->rx_to_clean->dma_addr); - nic->ru_running = 1; + if(rx->skb) { + e100_exec_cmd(nic, ruc_start, rx->dma_addr); + nic->ru_running = RU_RUNNING; } } @@ -1438,6 +1453,13 @@ static inline int e100_rx_alloc_skb(struct nic *nic, struct rx *rx) rx->dma_addr = pci_map_single(nic->pdev, rx->skb->data, RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL); + if(pci_dma_mapping_error(rx->dma_addr)) { + dev_kfree_skb_any(rx->skb); + rx->skb = 0; + rx->dma_addr = 0; + return -ENOMEM; + } + /* Link the RFD to end of RFA by linking previous RFD to * this one, and clearing EL bit of previous. */ if(rx->prev->skb) { @@ -1472,7 +1494,7 @@ static inline int e100_rx_indicate(struct nic *nic, struct rx *rx, /* If data isn't ready, nothing to indicate */ if(unlikely(!(rfd_status & cb_complete))) - return -EAGAIN; + return -ENODATA; /* Get actual data size */ actual_size = le16_to_cpu(rfd->actual_size) & 0x3FFF; @@ -1483,6 +1505,10 @@ static inline int e100_rx_indicate(struct nic *nic, struct rx *rx, pci_unmap_single(nic->pdev, rx->dma_addr, RFD_BUF_LEN, PCI_DMA_FROMDEVICE); + /* this allows for a fast restart without re-enabling interrupts */ + if(le16_to_cpu(rfd->command) & cb_el) + nic->ru_running = RU_SUSPENDED; + /* Pull off the RFD and put the actual data (minus eth hdr) */ skb_reserve(skb, sizeof(struct rfd)); skb_put(skb, actual_size); @@ -1515,20 +1541,45 @@ static inline void e100_rx_clean(struct nic *nic, unsigned int *work_done, unsigned int work_to_do) { struct rx *rx; + int restart_required = 0; + struct rx *rx_to_start = NULL; + + /* are we already rnr? then pay attention!!! this ensures that + * the state machine progression never allows a start with a + * partially cleaned list, avoiding a race between hardware + * and rx_to_clean when in NAPI mode */ + if(RU_SUSPENDED == nic->ru_running) + restart_required = 1; /* Indicate newly arrived packets */ for(rx = nic->rx_to_clean; rx->skb; rx = nic->rx_to_clean = rx->next) { - if(e100_rx_indicate(nic, rx, work_done, work_to_do)) + int err = e100_rx_indicate(nic, rx, work_done, work_to_do); + if(-EAGAIN == err) { + /* hit quota so have more work to do, restart once + * cleanup is complete */ + restart_required = 0; + break; + } else if(-ENODATA == err) break; /* No more to clean */ } + /* save our starting point as the place we'll restart the receiver */ + if(restart_required) + rx_to_start = nic->rx_to_clean; + /* Alloc new skbs to refill list */ for(rx = nic->rx_to_use; !rx->skb; rx = nic->rx_to_use = rx->next) { if(unlikely(e100_rx_alloc_skb(nic, rx))) break; /* Better luck next time (see watchdog) */ } - e100_start_receiver(nic); + if(restart_required) { + // ack the rnr? + writeb(stat_ack_rnr, &nic->csr->scb.stat_ack); + e100_start_receiver(nic, rx_to_start); + if(work_done) + (*work_done)++; + } } static void e100_rx_clean_list(struct nic *nic) @@ -1536,6 +1587,8 @@ static void e100_rx_clean_list(struct nic *nic) struct rx *rx; unsigned int i, count = nic->params.rfds.count; + nic->ru_running = RU_UNINITIALIZED; + if(nic->rxs) { for(rx = nic->rxs, i = 0; i < count; rx++, i++) { if(rx->skb) { @@ -1549,7 +1602,6 @@ static void e100_rx_clean_list(struct nic *nic) } nic->rx_to_use = nic->rx_to_clean = NULL; - nic->ru_running = 0; } static int e100_rx_alloc_list(struct nic *nic) @@ -1558,6 +1610,7 @@ static int e100_rx_alloc_list(struct nic *nic) unsigned int i, count = nic->params.rfds.count; nic->rx_to_use = nic->rx_to_clean = NULL; + nic->ru_running = RU_UNINITIALIZED; if(!(nic->rxs = kmalloc(sizeof(struct rx) * count, GFP_ATOMIC))) return -ENOMEM; @@ -1573,6 +1626,7 @@ static int e100_rx_alloc_list(struct nic *nic) } nic->rx_to_use = nic->rx_to_clean = nic->rxs; + nic->ru_running = RU_SUSPENDED; return 0; } @@ -1594,7 +1648,7 @@ static irqreturn_t e100_intr(int irq, void *dev_id, struct pt_regs *regs) /* We hit Receive No Resource (RNR); restart RU after cleaning */ if(stat_ack & stat_ack_rnr) - nic->ru_running = 0; + nic->ru_running = RU_SUSPENDED; e100_disable_irq(nic); netif_rx_schedule(netdev); @@ -1684,7 +1738,7 @@ static int e100_up(struct nic *nic) if((err = e100_hw_init(nic))) goto err_clean_cbs; e100_set_multicast_list(nic->netdev); - e100_start_receiver(nic); + e100_start_receiver(nic, 0); mod_timer(&nic->watchdog, jiffies); if((err = request_irq(nic->pdev->irq, e100_intr, SA_SHIRQ, nic->netdev->name, nic->netdev))) @@ -1759,7 +1813,7 @@ static int e100_loopback_test(struct nic *nic, enum loopback loopback_mode) mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR, BMCR_LOOPBACK); - e100_start_receiver(nic); + e100_start_receiver(nic, 0); if(!(skb = dev_alloc_skb(ETH_DATA_LEN))) { err = -ENOMEM; @@ -2233,6 +2287,7 @@ static int __devinit e100_probe(struct pci_dev *pdev, e100_get_defaults(nic); + /* locks must be initialized before calling hw_reset */ spin_lock_init(&nic->cb_lock); spin_lock_init(&nic->cmd_lock); @@ -2348,7 +2403,8 @@ static int e100_resume(struct pci_dev *pdev) pci_set_power_state(pdev, PCI_D0); pci_restore_state(pdev); - e100_hw_init(nic); + if(e100_hw_init(nic)) + DPRINTK(HW, ERR, "e100_hw_init failed\n"); netif_device_attach(netdev); if(netif_running(netdev)) -- cgit v1.2.3 From 0236ebb7ae85935b3b96eef7e8a4e203ea9958a0 Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 28 Apr 2005 19:17:42 -0700 Subject: [PATCH] e100: Synchronize interface link state with poll routine Synchronize interface link state with e100 poll routine Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak --- drivers/net/e100.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 2c8c14ebf20..c1ca2dae7c4 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -1743,8 +1743,11 @@ static int e100_up(struct nic *nic) if((err = request_irq(nic->pdev->irq, e100_intr, SA_SHIRQ, nic->netdev->name, nic->netdev))) goto err_no_irq; - e100_enable_irq(nic); netif_wake_queue(nic->netdev); + netif_poll_enable(nic->netdev); + /* enable ints _after_ enabling poll, preventing a race between + * disable ints+schedule */ + e100_enable_irq(nic); return 0; err_no_irq: @@ -1758,11 +1761,13 @@ err_rx_clean_list: static void e100_down(struct nic *nic) { + /* wait here for poll to complete */ + netif_poll_disable(nic->netdev); + netif_stop_queue(nic->netdev); e100_hw_reset(nic); free_irq(nic->pdev->irq, nic->netdev); del_timer_sync(&nic->watchdog); netif_carrier_off(nic->netdev); - netif_stop_queue(nic->netdev); e100_clean_cbs(nic); e100_rx_clean_list(nic); } -- cgit v1.2.3 From 6bdacb1ad58bb6b772a4fc18f21684437bd5f439 Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 28 Apr 2005 19:17:54 -0700 Subject: [PATCH] e100: Fix Wake on lan related issues Fix Wake on lan related issues Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak --- drivers/net/e100.c | 31 ++++++++++++++++++++++++++++--- 1 file changed, 28 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e100.c b/drivers/net/e100.c index c1ca2dae7c4..a43b82512b6 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -971,7 +971,8 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb) if(nic->flags & multicast_all) config->multicast_all = 0x1; /* 1=accept, 0=no */ - if(!(nic->flags & wol_magic)) + /* disable WoL when up */ + if(netif_running(nic->netdev) || !(nic->flags & wol_magic)) config->magic_packet_disable = 0x1; /* 1=off, 0=on */ if(nic->mac >= mac_82558_D101_A4) { @@ -1718,6 +1719,7 @@ static int e100_change_mtu(struct net_device *netdev, int new_mtu) return 0; } +#ifdef CONFIG_PM static int e100_asf(struct nic *nic) { /* ASF can be enabled from eeprom */ @@ -1726,6 +1728,7 @@ static int e100_asf(struct nic *nic) !(nic->eeprom[eeprom_config_asf] & eeprom_gcl) && ((nic->eeprom[eeprom_smbus_addr] & 0xFF) != 0xFE)); } +#endif static int e100_up(struct nic *nic) { @@ -1938,7 +1941,6 @@ static int e100_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) else nic->flags &= ~wol_magic; - pci_enable_wake(nic->pdev, 0, nic->flags & (wol_magic | e100_asf(nic))); e100_exec_cb(nic, NULL, e100_configure); return 0; @@ -2336,7 +2338,8 @@ static int __devinit e100_probe(struct pci_dev *pdev, (nic->eeprom[eeprom_id] & eeprom_id_wol)) nic->flags |= wol_magic; - pci_enable_wake(pdev, 0, nic->flags & (wol_magic | e100_asf(nic))); + /* ack any pending wake events, disable PME */ + pci_enable_wake(pdev, 0, 0); strcpy(netdev->name, "eth%d"); if((err = register_netdev(netdev))) { @@ -2408,6 +2411,8 @@ static int e100_resume(struct pci_dev *pdev) pci_set_power_state(pdev, PCI_D0); pci_restore_state(pdev); + /* ack any pending wake events, disable PME */ + pci_enable_wake(pdev, 0, 0); if(e100_hw_init(nic)) DPRINTK(HW, ERR, "e100_hw_init failed\n"); @@ -2419,6 +2424,21 @@ static int e100_resume(struct pci_dev *pdev) } #endif + +static void e100_shutdown(struct device *dev) +{ + struct pci_dev *pdev = container_of(dev, struct pci_dev, dev); + struct net_device *netdev = pci_get_drvdata(pdev); + struct nic *nic = netdev_priv(netdev); + +#ifdef CONFIG_PM + pci_enable_wake(pdev, 0, nic->flags & (wol_magic | e100_asf(nic))); +#else + pci_enable_wake(pdev, 0, nic->flags & (wol_magic)); +#endif +} + + static struct pci_driver e100_driver = { .name = DRV_NAME, .id_table = e100_id_table, @@ -2428,6 +2448,11 @@ static struct pci_driver e100_driver = { .suspend = e100_suspend, .resume = e100_resume, #endif + + .driver = { + .shutdown = e100_shutdown, + } + }; static int __init e100_init_module(void) -- cgit v1.2.3 From 962082b6df11fe8cabafd2971b07c914cd52ee2a Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 28 Apr 2005 19:19:46 -0700 Subject: [PATCH] e100: Performance optimizations to e100 Tx Path Performance optimizations to e100 Tx Path Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak --- drivers/net/e100.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e100.c b/drivers/net/e100.c index a43b82512b6..fc2a401d561 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -777,7 +777,7 @@ static int e100_eeprom_save(struct nic *nic, u16 start, u16 count) return 0; } -#define E100_WAIT_SCB_TIMEOUT 40 +#define E100_WAIT_SCB_TIMEOUT 20000 /* we might have to wait 100ms!!! */ static inline int e100_exec_cmd(struct nic *nic, u8 cmd, dma_addr_t dma_addr) { unsigned long flags; @@ -847,6 +847,10 @@ static inline int e100_exec_cb(struct nic *nic, struct sk_buff *skb, * because the controller is too busy, so * let's just queue the command and try again * when another command is scheduled. */ + if(err == -ENOSPC) { + //request a reset + schedule_work(&nic->tx_timeout_task); + } break; } else { nic->cuc_cmd = cuc_resume; @@ -891,7 +895,7 @@ static void mdio_write(struct net_device *netdev, int addr, int reg, int data) static void e100_get_defaults(struct nic *nic) { - struct param_range rfds = { .min = 64, .max = 256, .count = 64 }; + struct param_range rfds = { .min = 16, .max = 256, .count = 64 }; struct param_range cbs = { .min = 64, .max = 256, .count = 64 }; pci_read_config_byte(nic->pdev, PCI_REVISION_ID, &nic->rev_id); @@ -906,8 +910,9 @@ static void e100_get_defaults(struct nic *nic) /* Quadwords to DMA into FIFO before starting frame transmit */ nic->tx_threshold = 0xE0; - nic->tx_command = cpu_to_le16(cb_tx | cb_i | cb_tx_sf | - ((nic->mac >= mac_82558_D101_A4) ? cb_cid : 0)); + /* no interrupt for every tx completion, delay = 256us if not 557*/ + nic->tx_command = cpu_to_le16(cb_tx | cb_tx_sf | + ((nic->mac >= mac_82558_D101_A4) ? cb_cid : cb_i)); /* Template for a freshly allocated RFD */ nic->blank_rfd.command = cpu_to_le16(cb_el); @@ -1289,12 +1294,15 @@ static inline void e100_xmit_prepare(struct nic *nic, struct cb *cb, struct sk_buff *skb) { cb->command = nic->tx_command; + /* interrupt every 16 packets regardless of delay */ + if((nic->cbs_avail & ~15) == nic->cbs_avail) cb->command |= cb_i; cb->u.tcb.tbd_array = cb->dma_addr + offsetof(struct cb, u.tcb.tbd); cb->u.tcb.tcb_byte_count = 0; cb->u.tcb.threshold = nic->tx_threshold; cb->u.tcb.tbd_count = 1; cb->u.tcb.tbd.buf_addr = cpu_to_le32(pci_map_single(nic->pdev, skb->data, skb->len, PCI_DMA_TODEVICE)); + // check for mapping failure? cb->u.tcb.tbd.size = cpu_to_le16(skb->len); } -- cgit v1.2.3 From 042e2fb70006f135469d546726451b7d14768980 Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 28 Apr 2005 19:20:14 -0700 Subject: [PATCH] e100: Driver version, white space, comments, device id Driver version, white space, comments. Also enabled ICH-7 support Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak --- drivers/net/e100.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e100.c b/drivers/net/e100.c index fc2a401d561..4a47df5a9ff 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -155,9 +155,9 @@ #define DRV_NAME "e100" #define DRV_EXT "-NAPI" -#define DRV_VERSION "3.3.6-k2"DRV_EXT +#define DRV_VERSION "3.4.8-k2"DRV_EXT #define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver" -#define DRV_COPYRIGHT "Copyright(c) 1999-2004 Intel Corporation" +#define DRV_COPYRIGHT "Copyright(c) 1999-2005 Intel Corporation" #define PFX DRV_NAME ": " #define E100_WATCHDOG_PERIOD (2 * HZ) @@ -210,11 +210,17 @@ static struct pci_device_id e100_id_table[] = { INTEL_8255X_ETHERNET_DEVICE(0x1069, 6), INTEL_8255X_ETHERNET_DEVICE(0x106A, 6), INTEL_8255X_ETHERNET_DEVICE(0x106B, 6), + INTEL_8255X_ETHERNET_DEVICE(0x1091, 7), + INTEL_8255X_ETHERNET_DEVICE(0x1092, 7), + INTEL_8255X_ETHERNET_DEVICE(0x1093, 7), + INTEL_8255X_ETHERNET_DEVICE(0x1094, 7), + INTEL_8255X_ETHERNET_DEVICE(0x1095, 7), INTEL_8255X_ETHERNET_DEVICE(0x1209, 0), INTEL_8255X_ETHERNET_DEVICE(0x1229, 0), INTEL_8255X_ETHERNET_DEVICE(0x2449, 2), INTEL_8255X_ETHERNET_DEVICE(0x2459, 2), INTEL_8255X_ETHERNET_DEVICE(0x245D, 2), + INTEL_8255X_ETHERNET_DEVICE(0x27DC, 7), { 0, } }; MODULE_DEVICE_TABLE(pci, e100_id_table); -- cgit v1.2.3 From 5aa83a4c0a1568257ff7e249d39af64f75978b97 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 12 May 2005 22:27:35 -0400 Subject: [PATCH] remove two obsolete net drivers The options FMV18X and SK_G16 do depend on the non-available CONFIG_OBSOLETE even in kernel 2.4 - IOW, the last time it was able to select them was in kernel 2.2 (or even before). Since it seems noone misses these drivers, this patch removes them. Signed-off-by: Adrian Bunk Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 23 - drivers/net/Makefile | 2 - drivers/net/Space.c | 6 - drivers/net/fmv18x.c | 689 ----------------- drivers/net/sk_g16.c | 2066 -------------------------------------------------- drivers/net/sk_g16.h | 165 ---- 6 files changed, 2951 deletions(-) delete mode 100644 drivers/net/fmv18x.c delete mode 100644 drivers/net/sk_g16.c delete mode 100644 drivers/net/sk_g16.h (limited to 'drivers/net') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 3a0a55b62aa..20bdc12d5f2 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -989,21 +989,6 @@ config EEXPRESS_PRO . The module will be called eepro. -config FMV18X - tristate "FMV-181/182/183/184 support (OBSOLETE)" - depends on NET_ISA && OBSOLETE - ---help--- - If you have a Fujitsu FMV-181/182/183/184 network (Ethernet) card, - say Y and read the Ethernet-HOWTO, available from - . - - If you use an FMV-183 or FMV-184 and it is not working, you may need - to disable Plug & Play mode of the card. - - To compile this driver as a module, choose M here and read - . The module - will be called fmv18x. - config HPLAN_PLUS tristate "HP PCLAN+ (27247B and 27252A) support" depends on NET_ISA @@ -1092,14 +1077,6 @@ config SEEQ8005 . The module will be called seeq8005. -config SK_G16 - tristate "SK_G16 support (OBSOLETE)" - depends on NET_ISA && OBSOLETE - help - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - . - config SKMC tristate "SKnet MCA support" depends on NET_ETHERNET && MCA && BROKEN diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 6202b10dbb4..b52026109c2 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -73,7 +73,6 @@ obj-$(CONFIG_MAC8390) += mac8390.o 8390.o obj-$(CONFIG_APNE) += apne.o 8390.o obj-$(CONFIG_PCMCIA_PCNET) += 8390.o obj-$(CONFIG_SHAPER) += shaper.o -obj-$(CONFIG_SK_G16) += sk_g16.o obj-$(CONFIG_HP100) += hp100.o obj-$(CONFIG_SMC9194) += smc9194.o obj-$(CONFIG_FEC) += fec.o @@ -121,7 +120,6 @@ obj-$(CONFIG_DEFXX) += defxx.o obj-$(CONFIG_SGISEEQ) += sgiseeq.o obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o obj-$(CONFIG_AT1700) += at1700.o -obj-$(CONFIG_FMV18X) += fmv18x.o obj-$(CONFIG_EL1) += 3c501.o obj-$(CONFIG_EL16) += 3c507.o obj-$(CONFIG_ELMC) += 3c523.o diff --git a/drivers/net/Space.c b/drivers/net/Space.c index fb433325aa2..3707df6b0cf 100644 --- a/drivers/net/Space.c +++ b/drivers/net/Space.c @@ -210,9 +210,6 @@ static struct devprobe2 isa_probes[] __initdata = { #ifdef CONFIG_AT1700 {at1700_probe, 0}, #endif -#ifdef CONFIG_FMV18X /* Fujitsu FMV-181/182 */ - {fmv18x_probe, 0}, -#endif #ifdef CONFIG_ETH16I {eth16i_probe, 0}, /* ICL EtherTeam 16i/32 */ #endif @@ -243,9 +240,6 @@ static struct devprobe2 isa_probes[] __initdata = { #ifdef CONFIG_ELPLUS /* 3c505 */ {elplus_probe, 0}, #endif -#ifdef CONFIG_SK_G16 - {SK_init, 0}, -#endif #ifdef CONFIG_NI5010 {ni5010_probe, 0}, #endif diff --git a/drivers/net/fmv18x.c b/drivers/net/fmv18x.c deleted file mode 100644 index 04c74852347..00000000000 --- a/drivers/net/fmv18x.c +++ /dev/null @@ -1,689 +0,0 @@ -/* fmv18x.c: A network device driver for the Fujitsu FMV-181/182/183/184. - - Original: at1700.c (1993-94 by Donald Becker). - Copyright 1993 United States Government as represented by the - Director, National Security Agency. - The author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - Modified by Yutaka TAMIYA (tamy@flab.fujitsu.co.jp) - Copyright 1994 Fujitsu Laboratories Ltd. - Special thanks to: - Masayoshi UTAKA (utaka@ace.yk.fujitsu.co.jp) - for testing this driver. - H. NEGISHI (agy, negishi@sun45.psd.cs.fujitsu.co.jp) - for suggestion of some program modification. - Masahiro SEKIGUCHI - for suggestion of some program modification. - Kazutoshi MORIOKA (morioka@aurora.oaks.cs.fujitsu.co.jp) - for testing this driver. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - This is a device driver for the Fujitsu FMV-181/182/183/184, which - is a straight-forward Fujitsu MB86965 implementation. - - Sources: - at1700.c - The Fujitsu MB86965 datasheet. - The Fujitsu FMV-181/182 user's guide -*/ - -static const char version[] = - "fmv18x.c:v2.2.0 09/24/98 Yutaka TAMIYA (tamy@flab.fujitsu.co.jp)\n"; - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#define DRV_NAME "fmv18x" - -static unsigned fmv18x_probe_list[] __initdata = { - 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x300, 0x340, 0 -}; - -/* use 0 for production, 1 for verification, >2 for debug */ -#ifndef NET_DEBUG -#define NET_DEBUG 1 -#endif -static unsigned int net_debug = NET_DEBUG; - -typedef unsigned char uchar; - -/* Information that need to be kept for each board. */ -struct net_local { - struct net_device_stats stats; - long open_time; /* Useless example local info. */ - uint tx_started:1; /* Number of packet on the Tx queue. */ - uint tx_queue_ready:1; /* Tx queue is ready to be sent. */ - uint rx_started:1; /* Packets are Rxing. */ - uchar tx_queue; /* Number of packet on the Tx queue. */ - ushort tx_queue_len; /* Current length of the Tx queue. */ - spinlock_t lock; -}; - - -/* Offsets from the base address. */ -#define STATUS 0 -#define TX_STATUS 0 -#define RX_STATUS 1 -#define TX_INTR 2 /* Bit-mapped interrupt enable registers. */ -#define RX_INTR 3 -#define TX_MODE 4 -#define RX_MODE 5 -#define CONFIG_0 6 /* Misc. configuration settings. */ -#define CONFIG_1 7 -/* Run-time register bank 2 definitions. */ -#define DATAPORT 8 /* Word-wide DMA or programmed-I/O dataport. */ -#define TX_START 10 -#define COL16CNTL 11 /* Controll Reg for 16 collisions */ -#define MODE13 13 -/* Fujitsu FMV-18x Card Configuration */ -#define FJ_STATUS0 0x10 -#define FJ_STATUS1 0x11 -#define FJ_CONFIG0 0x12 -#define FJ_CONFIG1 0x13 -#define FJ_MACADDR 0x14 /* 0x14 - 0x19 */ -#define FJ_BUFCNTL 0x1A -#define FJ_BUFDATA 0x1C -#define FMV18X_IO_EXTENT 32 - -/* Index to functions, as function prototypes. */ - -static int fmv18x_probe1(struct net_device *dev, short ioaddr); -static int net_open(struct net_device *dev); -static int net_send_packet(struct sk_buff *skb, struct net_device *dev); -static irqreturn_t net_interrupt(int irq, void *dev_id, struct pt_regs *regs); -static void net_rx(struct net_device *dev); -static void net_timeout(struct net_device *dev); -static int net_close(struct net_device *dev); -static struct net_device_stats *net_get_stats(struct net_device *dev); -static void set_multicast_list(struct net_device *dev); - - -/* Check for a network adaptor of this type, and return '0' iff one exists. - If dev->base_addr == 0, probe all likely locations. - If dev->base_addr == 1, always return failure. - If dev->base_addr == 2, allocate space for the device and return success - (detachable devices only). - */ - -static int io = 0x220; -static int irq; - -struct net_device * __init fmv18x_probe(int unit) -{ - struct net_device *dev = alloc_etherdev(sizeof(struct net_local)); - unsigned *port; - int err = 0; - - if (!dev) - return ERR_PTR(-ENODEV); - - if (unit >= 0) { - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - io = dev->base_addr; - irq = dev->irq; - } - - SET_MODULE_OWNER(dev); - - if (io > 0x1ff) { /* Check a single specified location. */ - err = fmv18x_probe1(dev, io); - } else if (io != 0) { /* Don't probe at all. */ - err = -ENXIO; - } else { - for (port = fmv18x_probe_list; *port; port++) - if (fmv18x_probe1(dev, *port) == 0) - break; - if (!*port) - err = -ENODEV; - } - if (err) - goto out; - err = register_netdev(dev); - if (err) - goto out1; - return dev; -out1: - free_irq(dev->irq, dev); - release_region(dev->base_addr, FMV18X_IO_EXTENT); -out: - free_netdev(dev); - return ERR_PTR(err); -} - -/* The Fujitsu datasheet suggests that the NIC be probed for by checking its - "signature", the default bit pattern after a reset. This *doesn't* work -- - there is no way to reset the bus interface without a complete power-cycle! - - It turns out that ATI came to the same conclusion I did: the only thing - that can be done is checking a few bits and then diving right into MAC - address check. */ - -static int __init fmv18x_probe1(struct net_device *dev, short ioaddr) -{ - char irqmap[4] = {3, 7, 10, 15}; - char irqmap_pnp[8] = {3, 4, 5, 7, 9, 10, 11, 15}; - unsigned int i, retval; - struct net_local *lp; - - /* Resetting the chip doesn't reset the ISA interface, so don't bother. - That means we have to be careful with the register values we probe for. - */ - - if (!request_region(ioaddr, FMV18X_IO_EXTENT, DRV_NAME)) - return -EBUSY; - - dev->irq = irq; - dev->base_addr = ioaddr; - - /* Check I/O address configuration and Fujitsu vendor code */ - if (inb(ioaddr+FJ_MACADDR ) != 0x00 - || inb(ioaddr+FJ_MACADDR+1) != 0x00 - || inb(ioaddr+FJ_MACADDR+2) != 0x0e) { - retval = -ENODEV; - goto out; - } - - /* Check PnP mode for FMV-183/184/183A/184A. */ - /* This PnP routine is very poor. IO and IRQ should be known. */ - if (inb(ioaddr + FJ_STATUS1) & 0x20) { - for (i = 0; i < 8; i++) { - if (dev->irq == irqmap_pnp[i]) - break; - } - if (i == 8) { - retval = -ENODEV; - goto out; - } - } else { - if (fmv18x_probe_list[inb(ioaddr + FJ_CONFIG0) & 0x07] != ioaddr) - return -ENODEV; - dev->irq = irqmap[(inb(ioaddr + FJ_CONFIG0)>>6) & 0x03]; - } - - /* Snarf the interrupt vector now. */ - retval = request_irq(dev->irq, &net_interrupt, 0, DRV_NAME, dev); - if (retval) { - printk ("FMV-18x found at %#3x, but it's unusable due to a conflict on" - "IRQ %d.\n", ioaddr, dev->irq); - goto out; - } - - printk("%s: FMV-18x found at %#3x, IRQ %d, address ", dev->name, - ioaddr, dev->irq); - - for(i = 0; i < 6; i++) { - unsigned char val = inb(ioaddr + FJ_MACADDR + i); - printk("%02x", val); - dev->dev_addr[i] = val; - } - - /* "FJ_STATUS0" 12 bit 0x0400 means use regular 100 ohm 10baseT signals, - rather than 150 ohm shielded twisted pair compensation. - 0x0000 == auto-sense the interface - 0x0800 == use TP interface - 0x1800 == use coax interface - */ - { - const char *porttype[] = {"auto-sense", "10baseT", "auto-sense", "10base2/5"}; - ushort setup_value = inb(ioaddr + FJ_STATUS0); - - switch( setup_value & 0x07 ){ - case 0x01 /* 10base5 */: - case 0x02 /* 10base2 */: dev->if_port = 0x18; break; - case 0x04 /* 10baseT */: dev->if_port = 0x08; break; - default /* auto-sense*/: dev->if_port = 0x00; break; - } - printk(" %s interface.\n", porttype[(dev->if_port>>3) & 3]); - } - - /* Initialize LAN Controller and LAN Card */ - outb(0xda, ioaddr + CONFIG_0); /* Initialize LAN Controller */ - outb(0x00, ioaddr + CONFIG_1); /* Stand by mode */ - outb(0x00, ioaddr + FJ_CONFIG1); /* Disable IRQ of LAN Card */ - outb(0x00, ioaddr + FJ_BUFCNTL); /* Reset ? I'm not sure (TAMIYA) */ - - /* wait for a while */ - udelay(200); - - /* Set the station address in bank zero. */ - outb(0x00, ioaddr + CONFIG_1); - for (i = 0; i < 6; i++) - outb(dev->dev_addr[i], ioaddr + 8 + i); - - /* Switch to bank 1 and set the multicast table to accept none. */ - outb(0x04, ioaddr + CONFIG_1); - for (i = 0; i < 8; i++) - outb(0x00, ioaddr + 8 + i); - - /* Switch to bank 2 and lock our I/O address. */ - outb(0x08, ioaddr + CONFIG_1); - outb(dev->if_port, ioaddr + MODE13); - outb(0x00, ioaddr + COL16CNTL); - - if (net_debug) - printk(version); - - /* Initialize the device structure. */ - dev->priv = kmalloc(sizeof(struct net_local), GFP_KERNEL); - if (!dev->priv) { - retval = -ENOMEM; - goto out_irq; - } - memset(dev->priv, 0, sizeof(struct net_local)); - lp = dev->priv; - spin_lock_init(&lp->lock); - - dev->open = net_open; - dev->stop = net_close; - dev->hard_start_xmit = net_send_packet; - dev->tx_timeout = net_timeout; - dev->watchdog_timeo = HZ/10; - dev->get_stats = net_get_stats; - dev->set_multicast_list = set_multicast_list; - return 0; - -out_irq: - free_irq(dev->irq, dev); -out: - release_region(ioaddr, FMV18X_IO_EXTENT); - return retval; -} - - -static int net_open(struct net_device *dev) -{ - struct net_local *lp = dev->priv; - int ioaddr = dev->base_addr; - - /* Set the configuration register 0 to 32K 100ns. byte-wide memory, - 16 bit bus access, and two 4K Tx, enable the Rx and Tx. */ - outb(0x5a, ioaddr + CONFIG_0); - - /* Powerup and switch to register bank 2 for the run-time registers. */ - outb(0xe8, ioaddr + CONFIG_1); - - lp->tx_started = 0; - lp->tx_queue_ready = 1; - lp->rx_started = 0; - lp->tx_queue = 0; - lp->tx_queue_len = 0; - - /* Clear Tx and Rx Status */ - outb(0xff, ioaddr + TX_STATUS); - outb(0xff, ioaddr + RX_STATUS); - lp->open_time = jiffies; - - netif_start_queue(dev); - - /* Enable the IRQ of the LAN Card */ - outb(0x80, ioaddr + FJ_CONFIG1); - - /* Enable both Tx and Rx interrupts */ - outw(0x8182, ioaddr+TX_INTR); - - return 0; -} - -static void net_timeout(struct net_device *dev) -{ - struct net_local *lp = dev->priv; - int ioaddr = dev->base_addr; - unsigned long flags; - - - printk(KERN_WARNING "%s: transmit timed out with status %04x, %s?\n", dev->name, - htons(inw(ioaddr + TX_STATUS)), - inb(ioaddr + TX_STATUS) & 0x80 - ? "IRQ conflict" : "network cable problem"); - printk(KERN_WARNING "%s: timeout registers: %04x %04x %04x %04x %04x %04x %04x %04x.\n", - dev->name, htons(inw(ioaddr + 0)), - htons(inw(ioaddr + 2)), htons(inw(ioaddr + 4)), - htons(inw(ioaddr + 6)), htons(inw(ioaddr + 8)), - htons(inw(ioaddr +10)), htons(inw(ioaddr +12)), - htons(inw(ioaddr +14))); - printk(KERN_WARNING "eth card: %04x %04x\n", - htons(inw(ioaddr+FJ_STATUS0)), - htons(inw(ioaddr+FJ_CONFIG0))); - lp->stats.tx_errors++; - /* ToDo: We should try to restart the adaptor... */ - spin_lock_irqsave(&lp->lock, flags); - - /* Initialize LAN Controller and LAN Card */ - outb(0xda, ioaddr + CONFIG_0); /* Initialize LAN Controller */ - outb(0x00, ioaddr + CONFIG_1); /* Stand by mode */ - outb(0x00, ioaddr + FJ_CONFIG1); /* Disable IRQ of LAN Card */ - outb(0x00, ioaddr + FJ_BUFCNTL); /* Reset ? I'm not sure */ - net_open(dev); - spin_unlock_irqrestore(&lp->lock, flags); - - netif_wake_queue(dev); -} - -static int net_send_packet(struct sk_buff *skb, struct net_device *dev) -{ - struct net_local *lp = dev->priv; - int ioaddr = dev->base_addr; - short length = skb->len; - unsigned char *buf; - unsigned long flags; - - /* Block a transmit from overlapping. */ - - if (length > ETH_FRAME_LEN) { - if (net_debug) - printk("%s: Attempting to send a large packet (%d bytes).\n", - dev->name, length); - return 1; - } - - if (length < ETH_ZLEN) { - skb = skb_padto(skb, ETH_ZLEN); - if (skb == NULL) - return 0; - length = ETH_ZLEN; - } - buf = skb->data; - - if (net_debug > 4) - printk("%s: Transmitting a packet of length %lu.\n", dev->name, - (unsigned long)skb->len); - /* We may not start transmitting unless we finish transferring - a packet into the Tx queue. During executing the following - codes we possibly catch a Tx interrupt. Thus we flag off - tx_queue_ready, so that we prevent the interrupt routine - (net_interrupt) to start transmitting. */ - spin_lock_irqsave(&lp->lock, flags); - lp->tx_queue_ready = 0; - { - outw(length, ioaddr + DATAPORT); - outsw(ioaddr + DATAPORT, buf, (length + 1) >> 1); - lp->tx_queue++; - lp->tx_queue_len += length + 2; - } - lp->tx_queue_ready = 1; - spin_unlock_irqrestore(&lp->lock, flags); - - if (lp->tx_started == 0) { - /* If the Tx is idle, always trigger a transmit. */ - outb(0x80 | lp->tx_queue, ioaddr + TX_START); - lp->tx_queue = 0; - lp->tx_queue_len = 0; - dev->trans_start = jiffies; - lp->tx_started = 1; - } else if (lp->tx_queue_len >= 4096 - 1502) /* No room for a packet */ - netif_stop_queue(dev); - - dev_kfree_skb(skb); - return 0; -} - -/* The typical workload of the driver: - Handle the network interface interrupts. */ -static irqreturn_t -net_interrupt(int irq, void *dev_id, struct pt_regs *regs) -{ - struct net_device *dev = dev_id; - struct net_local *lp; - int ioaddr, status; - - ioaddr = dev->base_addr; - lp = dev->priv; - status = inw(ioaddr + TX_STATUS); - outw(status, ioaddr + TX_STATUS); - - if (net_debug > 4) - printk("%s: Interrupt with status %04x.\n", dev->name, status); - if (lp->rx_started == 0 && - (status & 0xff00 || (inb(ioaddr + RX_MODE) & 0x40) == 0)) { - /* Got a packet(s). - We cannot execute net_rx more than once at the same time for - the same device. During executing net_rx, we possibly catch a - Tx interrupt. Thus we flag on rx_started, so that we prevent - the interrupt routine (net_interrupt) to dive into net_rx - again. */ - lp->rx_started = 1; - outb(0x00, ioaddr + RX_INTR); /* Disable RX intr. */ - net_rx(dev); - outb(0x81, ioaddr + RX_INTR); /* Enable RX intr. */ - lp->rx_started = 0; - } - if (status & 0x00ff) { - if (status & 0x02) { - /* More than 16 collisions occurred */ - if (net_debug > 4) - printk("%s: 16 Collision occur during Txing.\n", dev->name); - /* Cancel sending a packet. */ - outb(0x03, ioaddr + COL16CNTL); - lp->stats.collisions++; - } - if (status & 0x82) { - spin_lock(&lp->lock); - lp->stats.tx_packets++; - if (lp->tx_queue && lp->tx_queue_ready) { - outb(0x80 | lp->tx_queue, ioaddr + TX_START); - lp->tx_queue = 0; - lp->tx_queue_len = 0; - dev->trans_start = jiffies; - netif_wake_queue(dev); /* Inform upper layers. */ - } else { - lp->tx_started = 0; - netif_wake_queue(dev); /* Inform upper layers. */ - } - spin_unlock(&lp->lock); - } - } - return IRQ_RETVAL(status); -} - -/* We have a good packet(s), get it/them out of the buffers. */ -static void net_rx(struct net_device *dev) -{ - struct net_local *lp = dev->priv; - int ioaddr = dev->base_addr; - int boguscount = 5; - - while ((inb(ioaddr + RX_MODE) & 0x40) == 0) { - /* Clear PKT_RDY bit: by agy 19940922 */ - /* outb(0x80, ioaddr + RX_STATUS); */ - ushort status = inw(ioaddr + DATAPORT); - - if (net_debug > 4) - printk("%s: Rxing packet mode %02x status %04x.\n", - dev->name, inb(ioaddr + RX_MODE), status); -#ifndef final_version - if (status == 0) { - outb(0x05, ioaddr + 14); - break; - } -#endif - - if ((status & 0xF0) != 0x20) { /* There was an error. */ - lp->stats.rx_errors++; - if (status & 0x08) lp->stats.rx_length_errors++; - if (status & 0x04) lp->stats.rx_frame_errors++; - if (status & 0x02) lp->stats.rx_crc_errors++; - if (status & 0x01) lp->stats.rx_over_errors++; - } else { - ushort pkt_len = inw(ioaddr + DATAPORT); - /* Malloc up new buffer. */ - struct sk_buff *skb; - - if (pkt_len > 1550) { - printk("%s: The FMV-18x claimed a very large packet, size %d.\n", - dev->name, pkt_len); - outb(0x05, ioaddr + 14); - lp->stats.rx_errors++; - break; - } - skb = dev_alloc_skb(pkt_len+3); - if (skb == NULL) { - printk("%s: Memory squeeze, dropping packet (len %d).\n", - dev->name, pkt_len); - outb(0x05, ioaddr + 14); - lp->stats.rx_dropped++; - break; - } - skb->dev = dev; - skb_reserve(skb,2); - - insw(ioaddr + DATAPORT, skb_put(skb,pkt_len), (pkt_len + 1) >> 1); - - if (net_debug > 5) { - int i; - printk("%s: Rxed packet of length %d: ", dev->name, pkt_len); - for (i = 0; i < 14; i++) - printk(" %02x", skb->data[i]); - printk(".\n"); - } - - skb->protocol=eth_type_trans(skb, dev); - netif_rx(skb); - dev->last_rx = jiffies; - lp->stats.rx_packets++; - lp->stats.rx_bytes += pkt_len; - } - if (--boguscount <= 0) - break; - } - - /* If any worth-while packets have been received, dev_rint() - has done a mark_bh(NET_BH) for us and will work on them - when we get to the bottom-half routine. */ - { - int i; - for (i = 0; i < 20; i++) { - if ((inb(ioaddr + RX_MODE) & 0x40) == 0x40) - break; - (void)inw(ioaddr + DATAPORT); /* dummy status read */ - outb(0x05, ioaddr + 14); - } - - if (net_debug > 5 && i > 0) - printk("%s: Exint Rx packet with mode %02x after %d ticks.\n", - dev->name, inb(ioaddr + RX_MODE), i); - } - - return; -} - -/* The inverse routine to net_open(). */ -static int net_close(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - - ((struct net_local *)dev->priv)->open_time = 0; - - netif_stop_queue(dev); - - /* Set configuration register 0 to disable Tx and Rx. */ - outb(0xda, ioaddr + CONFIG_0); - - /* Update the statistics -- ToDo. */ - - /* Power-down the chip. Green, green, green! */ - outb(0x00, ioaddr + CONFIG_1); - - /* Set the ethernet adaptor disable IRQ */ - outb(0x00, ioaddr + FJ_CONFIG1); - - return 0; -} - -/* Get the current statistics. This may be called with the card open or - closed. */ -static struct net_device_stats *net_get_stats(struct net_device *dev) -{ - struct net_local *lp = dev->priv; - return &lp->stats; -} - -/* Set or clear the multicast filter for this adaptor. - num_addrs == -1 Promiscuous mode, receive all packets - num_addrs == 0 Normal mode, clear multicast list - num_addrs > 0 Multicast mode, receive normal and MC packets, and do - best-effort filtering. - */ - -static void set_multicast_list(struct net_device *dev) -{ - short ioaddr = dev->base_addr; - if (dev->mc_count || dev->flags&(IFF_PROMISC|IFF_ALLMULTI)) - { - /* - * We must make the kernel realise we had to move - * into promisc mode or we start all out war on - * the cable. - AC - */ - dev->flags|=IFF_PROMISC; - - outb(3, ioaddr + RX_MODE); /* Enable promiscuous mode */ - } - else - outb(2, ioaddr + RX_MODE); /* Disable promiscuous, use normal mode */ -} - -#ifdef MODULE -static struct net_device *dev_fmv18x; - -MODULE_PARM(io, "i"); -MODULE_PARM(irq, "i"); -MODULE_PARM(net_debug, "i"); -MODULE_PARM_DESC(io, "FMV-18X I/O address"); -MODULE_PARM_DESC(irq, "FMV-18X IRQ number"); -MODULE_PARM_DESC(net_debug, "FMV-18X debug level (0-1,5-6)"); -MODULE_LICENSE("GPL"); - -int init_module(void) -{ - if (io == 0) - printk("fmv18x: You should not use auto-probing with insmod!\n"); - dev_fmv18x = fmv18x_probe(-1); - if (IS_ERR(dev_fmv18x)) - return PTR_ERR(dev_fmv18x); - return 0; -} - -void -cleanup_module(void) -{ - unregister_netdev(dev_fmv18x); - free_irq(dev_fmv18x->irq, dev_fmv18x); - release_region(dev_fmv18x->base_addr, FMV18X_IO_EXTENT); - free_netdev(dev_fmv18x); -} -#endif /* MODULE */ - -/* - * Local variables: - * compile-command: "gcc -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -m486 -c fmv18x.c" - * version-control: t - * kept-new-versions: 5 - * tab-width: 4 - * c-indent-level: 4 - * End: - */ diff --git a/drivers/net/sk_g16.c b/drivers/net/sk_g16.c deleted file mode 100644 index 134ae0e6495..00000000000 --- a/drivers/net/sk_g16.c +++ /dev/null @@ -1,2066 +0,0 @@ -/*- - * Copyright (C) 1994 by PJD Weichmann & SWS Bern, Switzerland - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - * Module : sk_g16.c - * - * Version : $Revision: 1.1 $ - * - * Author : Patrick J.D. Weichmann - * - * Date Created : 94/05/26 - * Last Updated : $Date: 1994/06/30 16:25:15 $ - * - * Description : Schneider & Koch G16 Ethernet Device Driver for - * Linux Kernel >= 1.1.22 - * Update History : - * Paul Gortmaker, 03/97: Fix for v2.1.x to use read{b,w} - * write{b,w} and memcpy -> memcpy_{to,from}io - * - * Jeff Garzik, 06/2000, Modularize - * --*/ - -static const char rcsid[] = "$Id: sk_g16.c,v 1.1 1994/06/30 16:25:15 root Exp $"; - -/* - * The Schneider & Koch (SK) G16 Network device driver is based - * on the 'ni6510' driver from Michael Hipp which can be found at - * ftp://sunsite.unc.edu/pub/Linux/system/Network/drivers/nidrivers.tar.gz - * - * Sources: 1) ni6510.c by M. Hipp - * 2) depca.c by D.C. Davies - * 3) skeleton.c by D. Becker - * 4) Am7990 Local Area Network Controller for Ethernet (LANCE), - * AMD, Pub. #05698, June 1989 - * - * Many Thanks for helping me to get things working to: - * - * A. Cox (A.Cox@swansea.ac.uk) - * M. Hipp (mhipp@student.uni-tuebingen.de) - * R. Bolz (Schneider & Koch, Germany) - * - * To Do: - * - Support of SK_G8 and other SK Network Cards. - * - Autoset memory mapped RAM. Check for free memory and then - * configure RAM correctly. - * - SK_close should really set card in to initial state. - * - Test if IRQ 3 is not switched off. Use autoirq() functionality. - * (as in /drivers/net/skeleton.c) - * - Implement Multicast addressing. At minimum something like - * in depca.c. - * - Redo the statistics part. - * - Try to find out if the board is in 8 Bit or 16 Bit slot. - * If in 8 Bit mode don't use IRQ 11. - * - (Try to make it slightly faster.) - * - Power management support - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include "sk_g16.h" - -/* - * Schneider & Koch Card Definitions - * ================================= - */ - -#define SK_NAME "SK_G16" - -/* - * SK_G16 Configuration - * -------------------- - */ - -/* - * Abbreviations - * ------------- - * - * RAM - used for the 16KB shared memory - * Boot_ROM, ROM - are used for referencing the BootEPROM - * - * SK_BOOT_ROM and SK_ADDR are symbolic constants used to configure - * the behaviour of the driver and the SK_G16. - * - * ! See sk_g16.install on how to install and configure the driver ! - * - * SK_BOOT_ROM defines if the Boot_ROM should be switched off or not. - * - * SK_ADDR defines the address where the RAM will be mapped into the real - * host memory. - * valid addresses are from 0xa0000 to 0xfc000 in 16Kbyte steps. - */ - -#define SK_BOOT_ROM 1 /* 1=BootROM on 0=off */ - -#define SK_ADDR 0xcc000 - -/* - * In POS3 are bits A14-A19 of the address bus. These bits can be set - * to choose the RAM address. That's why we only can choose the RAM address - * in 16KB steps. - */ - -#define POS_ADDR (rom_addr>>14) /* Do not change this line */ - -/* - * SK_G16 I/O PORT's + IRQ's + Boot_ROM locations - * ---------------------------------------------- - */ - -/* - * As nearly every card has also SK_G16 a specified I/O Port region and - * only a few possible IRQ's. - * In the Installation Guide from Schneider & Koch is listed a possible - * Interrupt IRQ2. IRQ2 is always IRQ9 in boards with two cascaded interrupt - * controllers. So we use in SK_IRQS IRQ9. - */ - -/* Don't touch any of the following #defines. */ - -#define SK_IO_PORTS { 0x100, 0x180, 0x208, 0x220, 0x288, 0x320, 0x328, 0x390, 0 } - -#define SK_IRQS { 3, 5, 9, 11, 0 } - -#define SK_BOOT_ROM_LOCATIONS { 0xc0000, 0xc4000, 0xc8000, 0xcc000, 0xd0000, 0xd4000, 0xd8000, 0xdc000, 0 } - -#define SK_BOOT_ROM_ID { 0x55, 0xaa, 0x10, 0x50, 0x06, 0x33 } - -/* - * SK_G16 POS REGISTERS - * -------------------- - */ - -/* - * SK_G16 has a Programmable Option Select (POS) Register. - * The POS is composed of 8 separate registers (POS0-7) which - * are I/O mapped on an address set by the W1 switch. - * - */ - -#define SK_POS_SIZE 8 /* 8 I/O Ports are used by SK_G16 */ - -#define SK_POS0 ioaddr /* Card-ID Low (R) */ -#define SK_POS1 ioaddr+1 /* Card-ID High (R) */ -#define SK_POS2 ioaddr+2 /* Card-Enable, Boot-ROM Disable (RW) */ -#define SK_POS3 ioaddr+3 /* Base address of RAM */ -#define SK_POS4 ioaddr+4 /* IRQ */ - -/* POS5 - POS7 are unused */ - -/* - * SK_G16 MAC PREFIX - * ----------------- - */ - -/* - * Scheider & Koch manufacturer code (00:00:a5). - * This must be checked, that we are sure it is a SK card. - */ - -#define SK_MAC0 0x00 -#define SK_MAC1 0x00 -#define SK_MAC2 0x5a - -/* - * SK_G16 ID - * --------- - */ - -/* - * If POS0,POS1 contain the following ID, then we know - * at which I/O Port Address we are. - */ - -#define SK_IDLOW 0xfd -#define SK_IDHIGH 0x6a - - -/* - * LANCE POS Bit definitions - * ------------------------- - */ - -#define SK_ROM_RAM_ON (POS2_CARD) -#define SK_ROM_RAM_OFF (POS2_EPROM) -#define SK_ROM_ON (inb(SK_POS2) & POS2_CARD) -#define SK_ROM_OFF (inb(SK_POS2) | POS2_EPROM) -#define SK_RAM_ON (inb(SK_POS2) | POS2_CARD) -#define SK_RAM_OFF (inb(SK_POS2) & POS2_EPROM) - -#define POS2_CARD 0x0001 /* 1 = SK_G16 on 0 = off */ -#define POS2_EPROM 0x0002 /* 1 = Boot EPROM off 0 = on */ - -/* - * SK_G16 Memory mapped Registers - * ------------------------------ - * - */ - -#define SK_IOREG (&board->ioreg) /* LANCE data registers. */ -#define SK_PORT (&board->port) /* Control, Status register */ -#define SK_IOCOM (&board->iocom) /* I/O Command */ - -/* - * SK_G16 Status/Control Register bits - * ----------------------------------- - * - * (C) Controlreg (S) Statusreg - */ - -/* - * Register transfer: 0 = no transfer - * 1 = transferring data between LANCE and I/O reg - */ -#define SK_IORUN 0x20 - -/* - * LANCE interrupt: 0 = LANCE interrupt occurred - * 1 = no LANCE interrupt occurred - */ -#define SK_IRQ 0x10 - -#define SK_RESET 0x08 /* Reset SK_CARD: 0 = RESET 1 = normal */ -#define SK_RW 0x02 /* 0 = write to 1 = read from */ -#define SK_ADR 0x01 /* 0 = REG DataPort 1 = RAP Reg addr port */ - - -#define SK_RREG SK_RW /* Transferdirection to read from lance */ -#define SK_WREG 0 /* Transferdirection to write to lance */ -#define SK_RAP SK_ADR /* Destination Register RAP */ -#define SK_RDATA 0 /* Destination Register REG DataPort */ - -/* - * SK_G16 I/O Command - * ------------------ - */ - -/* - * Any bitcombination sets the internal I/O bit (transfer will start) - * when written to I/O Command - */ - -#define SK_DOIO 0x80 /* Do Transfer */ - -/* - * LANCE RAP (Register Address Port). - * --------------------------------- - */ - -/* - * The LANCE internal registers are selected through the RAP. - * The Registers are: - * - * CSR0 - Status and Control flags - * CSR1 - Low order bits of initialize block (bits 15:00) - * CSR2 - High order bits of initialize block (bits 07:00, 15:08 are reserved) - * CSR3 - Allows redefinition of the Bus Master Interface. - * This register must be set to 0x0002, which means BSWAP = 0, - * ACON = 1, BCON = 0; - * - */ - -#define CSR0 0x00 -#define CSR1 0x01 -#define CSR2 0x02 -#define CSR3 0x03 - -/* - * General Definitions - * =================== - */ - -/* - * Set the number of Tx and Rx buffers, using Log_2(# buffers). - * We have 16KB RAM which can be accessed by the LANCE. In the - * memory are not only the buffers but also the ring descriptors and - * the initialize block. - * Don't change anything unless you really know what you do. - */ - -#define LC_LOG_TX_BUFFERS 1 /* (2 == 2^^1) 2 Transmit buffers */ -#define LC_LOG_RX_BUFFERS 3 /* (8 == 2^^3) 8 Receive buffers */ - -/* Descriptor ring sizes */ - -#define TMDNUM (1 << (LC_LOG_TX_BUFFERS)) /* 2 Transmit descriptor rings */ -#define RMDNUM (1 << (LC_LOG_RX_BUFFERS)) /* 8 Receive Buffers */ - -/* Define Mask for setting RMD, TMD length in the LANCE init_block */ - -#define TMDNUMMASK (LC_LOG_TX_BUFFERS << 29) -#define RMDNUMMASK (LC_LOG_RX_BUFFERS << 29) - -/* - * Data Buffer size is set to maximum packet length. - */ - -#define PKT_BUF_SZ 1518 - -/* - * The number of low I/O ports used by the ethercard. - */ - -#define ETHERCARD_TOTAL_SIZE SK_POS_SIZE - -/* - * SK_DEBUG - * - * Here you can choose what level of debugging wanted. - * - * If SK_DEBUG and SK_DEBUG2 are undefined, then only the - * necessary messages will be printed. - * - * If SK_DEBUG is defined, there will be many debugging prints - * which can help to find some mistakes in configuration or even - * in the driver code. - * - * If SK_DEBUG2 is defined, many many messages will be printed - * which normally you don't need. I used this to check the interrupt - * routine. - * - * (If you define only SK_DEBUG2 then only the messages for - * checking interrupts will be printed!) - * - * Normal way of live is: - * - * For the whole thing get going let both symbolic constants - * undefined. If you face any problems and you know what's going - * on (you know something about the card and you can interpret some - * hex LANCE register output) then define SK_DEBUG - * - */ - -#undef SK_DEBUG /* debugging */ -#undef SK_DEBUG2 /* debugging with more verbose report */ - -#ifdef SK_DEBUG -#define PRINTK(x) printk x -#else -#define PRINTK(x) /**/ -#endif - -#ifdef SK_DEBUG2 -#define PRINTK2(x) printk x -#else -#define PRINTK2(x) /**/ -#endif - -/* - * SK_G16 RAM - * - * The components are memory mapped and can be set in a region from - * 0x00000 through 0xfc000 in 16KB steps. - * - * The Network components are: dual ported RAM, Prom, I/O Reg, Status-, - * Controlregister and I/O Command. - * - * dual ported RAM: This is the only memory region which the LANCE chip - * has access to. From the Lance it is addressed from 0x0000 to - * 0x3fbf. The host accesses it normally. - * - * PROM: The PROM obtains the ETHERNET-MAC-Address. It is realised as a - * 8-Bit PROM, this means only the 16 even addresses are used of the - * 32 Byte Address region. Access to an odd address results in invalid - * data. - * - * LANCE I/O Reg: The I/O Reg is build of 4 single Registers, Low-Byte Write, - * Hi-Byte Write, Low-Byte Read, Hi-Byte Read. - * Transfer from or to the LANCE is always in 16Bit so Low and High - * registers are always relevant. - * - * The Data from the Readregister is not the data in the Writeregister!! - * - * Port: Status- and Controlregister. - * Two different registers which share the same address, Status is - * read-only, Control is write-only. - * - * I/O Command: - * Any bitcombination written in here starts the transmission between - * Host and LANCE. - */ - -typedef struct -{ - unsigned char ram[0x3fc0]; /* 16KB dual ported ram */ - unsigned char rom[0x0020]; /* 32Byte PROM containing 6Byte MAC */ - unsigned char res1[0x0010]; /* reserved */ - unsigned volatile short ioreg;/* LANCE I/O Register */ - unsigned volatile char port; /* Statusregister and Controlregister */ - unsigned char iocom; /* I/O Command Register */ -} SK_RAM; - -/* struct */ - -/* - * This is the structure for the dual ported ram. We - * have exactly 16 320 Bytes. In here there must be: - * - * - Initialize Block (starting at a word boundary) - * - Receive and Transmit Descriptor Rings (quadword boundary) - * - Data Buffers (arbitrary boundary) - * - * This is because LANCE has on SK_G16 only access to the dual ported - * RAM and nowhere else. - */ - -struct SK_ram -{ - struct init_block ib; - struct tmd tmde[TMDNUM]; - struct rmd rmde[RMDNUM]; - char tmdbuf[TMDNUM][PKT_BUF_SZ]; - char rmdbuf[RMDNUM][PKT_BUF_SZ]; -}; - -/* - * Structure where all necessary information is for ring buffer - * management and statistics. - */ - -struct priv -{ - struct SK_ram *ram; /* dual ported ram structure */ - struct rmd *rmdhead; /* start of receive ring descriptors */ - struct tmd *tmdhead; /* start of transmit ring descriptors */ - int rmdnum; /* actual used ring descriptor */ - int tmdnum; /* actual transmit descriptor for transmitting data */ - int tmdlast; /* last sent descriptor used for error handling, etc */ - void *rmdbufs[RMDNUM]; /* pointer to the receive buffers */ - void *tmdbufs[TMDNUM]; /* pointer to the transmit buffers */ - struct net_device_stats stats; /* Device driver statistics */ -}; - -/* global variable declaration */ - -/* IRQ map used to reserve a IRQ (see SK_open()) */ - -/* static variables */ - -static SK_RAM *board; /* pointer to our memory mapped board components */ -static DEFINE_SPINLOCK(SK_lock); - -/* Macros */ - - -/* Function Prototypes */ - -/* - * Device Driver functions - * ----------------------- - * See for short explanation of each function its definitions header. - */ - -static int SK_probe(struct net_device *dev, short ioaddr); - -static void SK_timeout(struct net_device *dev); -static int SK_open(struct net_device *dev); -static int SK_send_packet(struct sk_buff *skb, struct net_device *dev); -static irqreturn_t SK_interrupt(int irq, void *dev_id, struct pt_regs * regs); -static void SK_rxintr(struct net_device *dev); -static void SK_txintr(struct net_device *dev); -static int SK_close(struct net_device *dev); - -static struct net_device_stats *SK_get_stats(struct net_device *dev); - -unsigned int SK_rom_addr(void); - -static void set_multicast_list(struct net_device *dev); - -/* - * LANCE Functions - * --------------- - */ - -static int SK_lance_init(struct net_device *dev, unsigned short mode); -void SK_reset_board(void); -void SK_set_RAP(int reg_number); -int SK_read_reg(int reg_number); -int SK_rread_reg(void); -void SK_write_reg(int reg_number, int value); - -/* - * Debugging functions - * ------------------- - */ - -void SK_print_pos(struct net_device *dev, char *text); -void SK_print_dev(struct net_device *dev, char *text); -void SK_print_ram(struct net_device *dev); - - -/*- - * Function : SK_init - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/26 - * - * Description : Check for a SK_G16 network adaptor and initialize it. - * This function gets called by dev_init which initializes - * all Network devices. - * - * Parameters : I : struct net_device *dev - structure preconfigured - * from Space.c - * Return Value : 0 = Driver Found and initialized - * Errors : ENODEV - no device found - * ENXIO - not probed - * Globals : None - * Update History : - * YY/MM/DD uid Description --*/ - -static int io; /* 0 == probe */ - -/* - * Check for a network adaptor of this type, and return '0' if one exists. - * If dev->base_addr == 0, probe all likely locations. - * If dev->base_addr == 1, always return failure. - */ - -struct net_device * __init SK_init(int unit) -{ - int *port, ports[] = SK_IO_PORTS; /* SK_G16 supported ports */ - static unsigned version_printed; - struct net_device *dev = alloc_etherdev(sizeof(struct priv)); - int err = -ENODEV; - - if (!dev) - return ERR_PTR(-ENOMEM); - - if (unit >= 0) { - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - io = dev->base_addr; - } - - if (version_printed++ == 0) - PRINTK(("%s: %s", SK_NAME, rcsid)); - - if (io > 0xff) { /* Check a single specified address */ - err = -EBUSY; - /* Check if on specified address is a SK_G16 */ - if (request_region(io, ETHERCARD_TOTAL_SIZE, "sk_g16")) { - err = SK_probe(dev, io); - if (!err) - goto got_it; - release_region(io, ETHERCARD_TOTAL_SIZE); - } - } else if (io > 0) { /* Don't probe at all */ - err = -ENXIO; - } else { - /* Autoprobe base_addr */ - for (port = &ports[0]; *port; port++) { - io = *port; - - /* Check if I/O Port region is used by another board */ - if (!request_region(io, ETHERCARD_TOTAL_SIZE, "sk_g16")) - continue; /* Try next Port address */ - - /* Check if at ioaddr is a SK_G16 */ - if (SK_probe(dev, io) == 0) - goto got_it; - - release_region(io, ETHERCARD_TOTAL_SIZE); - } - } -err_out: - free_netdev(dev); - return ERR_PTR(err); - -got_it: - err = register_netdev(dev); - if (err) { - release_region(dev->base_addr, ETHERCARD_TOTAL_SIZE); - goto err_out; - } - return dev; - -} /* End of SK_init */ - - -MODULE_AUTHOR("Patrick J.D. Weichmann"); -MODULE_DESCRIPTION("Schneider & Koch G16 Ethernet Device Driver"); -MODULE_LICENSE("GPL"); -MODULE_PARM(io, "i"); -MODULE_PARM_DESC(io, "0 to probe common ports (unsafe), or the I/O base of the board"); - - -#ifdef MODULE - -static struct net_device *SK_dev; - -static int __init SK_init_module (void) -{ - SK_dev = SK_init(-1); - return IS_ERR(SK_dev) ? PTR_ERR(SK_dev) : 0; -} - -static void __exit SK_cleanup_module (void) -{ - unregister_netdev(SK_dev); - release_region(SK_dev->base_addr, ETHERCARD_TOTAL_SIZE); - free_netdev(SK_dev); -} - -module_init(SK_init_module); -module_exit(SK_cleanup_module); -#endif - - -/*- - * Function : SK_probe - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/26 - * - * Description : This function is called by SK_init and - * does the main part of initialization. - * - * Parameters : I : struct net_device *dev - SK_G16 device structure - * I : short ioaddr - I/O Port address where POS is. - * Return Value : 0 = Initialization done - * Errors : ENODEV - No SK_G16 found - * -1 - Configuration problem - * Globals : board - pointer to SK_RAM - * Update History : - * YY/MM/DD uid Description - * 94/06/30 pwe SK_ADDR now checked and at the correct place --*/ - -int __init SK_probe(struct net_device *dev, short ioaddr) -{ - int i,j; /* Counters */ - int sk_addr_flag = 0; /* SK ADDR correct? 1 - no, 0 - yes */ - unsigned int rom_addr; /* used to store RAM address used for POS_ADDR */ - - struct priv *p = netdev_priv(dev); /* SK_G16 private structure */ - - if (inb(SK_POS0) != SK_IDLOW || inb(SK_POS1) != SK_IDHIGH) - return -ENODEV; - dev->base_addr = ioaddr; - - if (SK_ADDR & 0x3fff || SK_ADDR < 0xa0000) - { - - sk_addr_flag = 1; - - /* - * Now here we could use a routine which searches for a free - * place in the ram and set SK_ADDR if found. TODO. - */ - } - - if (SK_BOOT_ROM) /* Shall we keep Boot_ROM on ? */ - { - PRINTK(("## %s: SK_BOOT_ROM is set.\n", SK_NAME)); - - rom_addr = SK_rom_addr(); - - if (rom_addr == 0) /* No Boot_ROM found */ - { - if (sk_addr_flag) /* No or Invalid SK_ADDR is defined */ - { - printk("%s: SK_ADDR %#08x is not valid. Check configuration.\n", - dev->name, SK_ADDR); - return -1; - } - - rom_addr = SK_ADDR; /* assign predefined address */ - - PRINTK(("## %s: NO Bootrom found \n", SK_NAME)); - - outb(SK_ROM_RAM_OFF, SK_POS2); /* Boot_ROM + RAM off */ - outb(POS_ADDR, SK_POS3); /* Set RAM address */ - outb(SK_RAM_ON, SK_POS2); /* enable RAM */ - } - else if (rom_addr == SK_ADDR) - { - printk("%s: RAM + ROM are set to the same address %#08x\n" - " Check configuration. Now switching off Boot_ROM\n", - SK_NAME, rom_addr); - - outb(SK_ROM_RAM_OFF, SK_POS2); /* Boot_ROM + RAM off*/ - outb(POS_ADDR, SK_POS3); /* Set RAM address */ - outb(SK_RAM_ON, SK_POS2); /* enable RAM */ - } - else - { - PRINTK(("## %s: Found ROM at %#08x\n", SK_NAME, rom_addr)); - PRINTK(("## %s: Keeping Boot_ROM on\n", SK_NAME)); - - if (sk_addr_flag) /* No or Invalid SK_ADDR is defined */ - { - printk("%s: SK_ADDR %#08x is not valid. Check configuration.\n", - dev->name, SK_ADDR); - return -1; - } - - rom_addr = SK_ADDR; - - outb(SK_ROM_RAM_OFF, SK_POS2); /* Boot_ROM + RAM off */ - outb(POS_ADDR, SK_POS3); /* Set RAM address */ - outb(SK_ROM_RAM_ON, SK_POS2); /* RAM on, BOOT_ROM on */ - } - } - else /* Don't keep Boot_ROM */ - { - PRINTK(("## %s: SK_BOOT_ROM is not set.\n", SK_NAME)); - - if (sk_addr_flag) /* No or Invalid SK_ADDR is defined */ - { - printk("%s: SK_ADDR %#08x is not valid. Check configuration.\n", - dev->name, SK_ADDR); - return -1; - } - - rom_addr = SK_rom_addr(); /* Try to find a Boot_ROM */ - - /* IF we find a Boot_ROM disable it */ - - outb(SK_ROM_RAM_OFF, SK_POS2); /* Boot_ROM + RAM off */ - - /* We found a Boot_ROM and it's gone. Set RAM address on - * Boot_ROM address. - */ - - if (rom_addr) - { - printk("%s: We found Boot_ROM at %#08x. Now setting RAM on" - "that address\n", SK_NAME, rom_addr); - - outb(POS_ADDR, SK_POS3); /* Set RAM on Boot_ROM address */ - } - else /* We did not find a Boot_ROM, use predefined SK_ADDR for ram */ - { - if (sk_addr_flag) /* No or Invalid SK_ADDR is defined */ - { - printk("%s: SK_ADDR %#08x is not valid. Check configuration.\n", - dev->name, SK_ADDR); - return -1; - } - - rom_addr = SK_ADDR; - - outb(POS_ADDR, SK_POS3); /* Set RAM address */ - } - outb(SK_RAM_ON, SK_POS2); /* enable RAM */ - } - -#ifdef SK_DEBUG - SK_print_pos(dev, "POS registers after ROM, RAM config"); -#endif - - board = (SK_RAM *) isa_bus_to_virt(rom_addr); - - /* Read in station address */ - for (i = 0, j = 0; i < ETH_ALEN; i++, j+=2) - { - dev->dev_addr[i] = readb(board->rom+j); - } - - /* Check for manufacturer code */ - if (!(dev->dev_addr[0] == SK_MAC0 && - dev->dev_addr[1] == SK_MAC1 && - dev->dev_addr[2] == SK_MAC2) ) - { - PRINTK(("## %s: We did not find SK_G16 at RAM location.\n", - SK_NAME)); - return -ENODEV; /* NO SK_G16 found */ - } - - printk("%s: %s found at %#3x, HW addr: %#04x:%02x:%02x:%02x:%02x:%02x\n", - dev->name, - "Schneider & Koch Netcard", - (unsigned int) dev->base_addr, - dev->dev_addr[0], - dev->dev_addr[1], - dev->dev_addr[2], - dev->dev_addr[3], - dev->dev_addr[4], - dev->dev_addr[5]); - - memset((char *) dev->priv, 0, sizeof(struct priv)); /* clear memory */ - - /* Assign our Device Driver functions */ - - dev->open = SK_open; - dev->stop = SK_close; - dev->hard_start_xmit = SK_send_packet; - dev->get_stats = SK_get_stats; - dev->set_multicast_list = set_multicast_list; - dev->tx_timeout = SK_timeout; - dev->watchdog_timeo = HZ/7; - - - dev->flags &= ~IFF_MULTICAST; - - /* Initialize private structure */ - - p->ram = (struct SK_ram *) rom_addr; /* Set dual ported RAM addr */ - p->tmdhead = &(p->ram)->tmde[0]; /* Set TMD head */ - p->rmdhead = &(p->ram)->rmde[0]; /* Set RMD head */ - - /* Initialize buffer pointers */ - - for (i = 0; i < TMDNUM; i++) - { - p->tmdbufs[i] = &(p->ram)->tmdbuf[i]; - } - - for (i = 0; i < RMDNUM; i++) - { - p->rmdbufs[i] = &(p->ram)->rmdbuf[i]; - } - -#ifdef SK_DEBUG - SK_print_pos(dev, "End of SK_probe"); - SK_print_ram(dev); -#endif - return 0; /* Initialization done */ -} /* End of SK_probe() */ - - -/*- - * Function : SK_open - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/26 - * - * Description : This function is called sometimes after booting - * when ifconfig program is run. - * - * This function requests an IRQ, sets the correct - * IRQ in the card. Then calls SK_lance_init() to - * init and start the LANCE chip. Then if everything is - * ok returns with 0 (OK), which means SK_G16 is now - * opened and operational. - * - * (Called by dev_open() /net/inet/dev.c) - * - * Parameters : I : struct net_device *dev - SK_G16 device structure - * Return Value : 0 - Device opened - * Errors : -EAGAIN - Open failed - * Side Effects : None - * Update History : - * YY/MM/DD uid Description --*/ - -static int SK_open(struct net_device *dev) -{ - int i = 0; - int irqval = 0; - int ioaddr = dev->base_addr; - - int irqtab[] = SK_IRQS; - - struct priv *p = netdev_priv(dev); - - PRINTK(("## %s: At beginning of SK_open(). CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0))); - - if (dev->irq == 0) /* Autoirq */ - { - i = 0; - - /* - * Check if one IRQ out of SK_IRQS is free and install - * interrupt handler. - * Most done by request_irq(). - * irqval: 0 - interrupt handler installed for IRQ irqtab[i] - * -EBUSY - interrupt busy - * -EINVAL - irq > 15 or handler = NULL - */ - - do - { - irqval = request_irq(irqtab[i], &SK_interrupt, 0, "sk_g16", dev); - i++; - } while (irqval && irqtab[i]); - - if (irqval) /* We tried every possible IRQ but no success */ - { - printk("%s: unable to get an IRQ\n", dev->name); - return -EAGAIN; - } - - dev->irq = irqtab[--i]; - - outb(i<<2, SK_POS4); /* Set Card on probed IRQ */ - - } - else if (dev->irq == 2) /* IRQ2 is always IRQ9 */ - { - if (request_irq(9, &SK_interrupt, 0, "sk_g16", dev)) - { - printk("%s: unable to get IRQ 9\n", dev->name); - return -EAGAIN; - } - dev->irq = 9; - - /* - * Now we set card on IRQ2. - * This can be confusing, but remember that IRQ2 on the network - * card is in reality IRQ9 - */ - outb(0x08, SK_POS4); /* set card to IRQ2 */ - - } - else /* Check IRQ as defined in Space.c */ - { - int i = 0; - - /* check if IRQ free and valid. Then install Interrupt handler */ - - if (request_irq(dev->irq, &SK_interrupt, 0, "sk_g16", dev)) - { - printk("%s: unable to get selected IRQ\n", dev->name); - return -EAGAIN; - } - - switch(dev->irq) - { - case 3: i = 0; - break; - case 5: i = 1; - break; - case 2: i = 2; - break; - case 11:i = 3; - break; - default: - printk("%s: Preselected IRQ %d is invalid for %s boards", - dev->name, - dev->irq, - SK_NAME); - return -EAGAIN; - } - - outb(i<<2, SK_POS4); /* Set IRQ on card */ - } - - printk("%s: Schneider & Koch G16 at %#3x, IRQ %d, shared mem at %#08x\n", - dev->name, (unsigned int)dev->base_addr, - (int) dev->irq, (unsigned int) p->ram); - - if (!(i = SK_lance_init(dev, 0))) /* LANCE init OK? */ - { - netif_start_queue(dev); - -#ifdef SK_DEBUG - - /* - * This debug block tries to stop LANCE, - * reinit LANCE with transmitter and receiver disabled, - * then stop again and reinit with NORMAL_MODE - */ - - printk("## %s: After lance init. CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0)); - SK_write_reg(CSR0, CSR0_STOP); - printk("## %s: LANCE stopped. CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0)); - SK_lance_init(dev, MODE_DTX | MODE_DRX); - printk("## %s: Reinit with DTX + DRX off. CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0)); - SK_write_reg(CSR0, CSR0_STOP); - printk("## %s: LANCE stopped. CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0)); - SK_lance_init(dev, MODE_NORMAL); - printk("## %s: LANCE back to normal mode. CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0)); - SK_print_pos(dev, "POS regs before returning OK"); - -#endif /* SK_DEBUG */ - - return 0; /* SK_open() is successful */ - } - else /* LANCE init failed */ - { - - PRINTK(("## %s: LANCE init failed: CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0))); - - return -EAGAIN; - } - -} /* End of SK_open() */ - - -/*- - * Function : SK_lance_init - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/26 - * - * Description : Reset LANCE chip, fill RMD, TMD structures with - * start values and Start LANCE. - * - * Parameters : I : struct net_device *dev - SK_G16 device structure - * I : int mode - put LANCE into "mode" see data-sheet for - * more info. - * Return Value : 0 - Init done - * Errors : -1 - Init failed - * Update History : - * YY/MM/DD uid Description --*/ - -static int SK_lance_init(struct net_device *dev, unsigned short mode) -{ - int i; - unsigned long flags; - struct priv *p = netdev_priv(dev); - struct tmd *tmdp; - struct rmd *rmdp; - - PRINTK(("## %s: At beginning of LANCE init. CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0))); - - /* Reset LANCE */ - SK_reset_board(); - - /* Initialize TMD's with start values */ - p->tmdnum = 0; /* First descriptor for transmitting */ - p->tmdlast = 0; /* First descriptor for reading stats */ - - for (i = 0; i < TMDNUM; i++) /* Init all TMD's */ - { - tmdp = p->tmdhead + i; - - writel((unsigned long) p->tmdbufs[i], tmdp->u.buffer); /* assign buffer */ - - /* Mark TMD as start and end of packet */ - writeb(TX_STP | TX_ENP, &tmdp->u.s.status); - } - - - /* Initialize RMD's with start values */ - - p->rmdnum = 0; /* First RMD which will be used */ - - for (i = 0; i < RMDNUM; i++) /* Init all RMD's */ - { - rmdp = p->rmdhead + i; - - - writel((unsigned long) p->rmdbufs[i], rmdp->u.buffer); /* assign buffer */ - - /* - * LANCE must be owner at beginning so that he can fill in - * receiving packets, set status and release RMD - */ - - writeb(RX_OWN, &rmdp->u.s.status); - - writew(-PKT_BUF_SZ, &rmdp->blen); /* Buffer Size (two's complement) */ - - writeb(0, &rmdp->mlen); /* init message length */ - - } - - /* Fill LANCE Initialize Block */ - - writew(mode, (&((p->ram)->ib.mode))); /* Set operation mode */ - - for (i = 0; i < ETH_ALEN; i++) /* Set physical address */ - { - writeb(dev->dev_addr[i], (&((p->ram)->ib.paddr[i]))); - } - - for (i = 0; i < 8; i++) /* Set multicast, logical address */ - { - writeb(0, (&((p->ram)->ib.laddr[i]))); /* We do not use logical addressing */ - } - - /* Set ring descriptor pointers and set number of descriptors */ - - writel((int)p->rmdhead | RMDNUMMASK, (&((p->ram)->ib.rdrp))); - writel((int)p->tmdhead | TMDNUMMASK, (&((p->ram)->ib.tdrp))); - - /* Prepare LANCE Control and Status Registers */ - - spin_lock_irqsave(&SK_lock, flags); - - SK_write_reg(CSR3, CSR3_ACON); /* Ale Control !!!THIS MUST BE SET!!!! */ - - /* - * LANCE addresses the RAM from 0x0000 to 0x3fbf and has no access to - * PC Memory locations. - * - * In structure SK_ram is defined that the first thing in ram - * is the initialization block. So his address is for LANCE always - * 0x0000 - * - * CSR1 contains low order bits 15:0 of initialization block address - * CSR2 is built of: - * 7:0 High order bits 23:16 of initialization block address - * 15:8 reserved, must be 0 - */ - - /* Set initialization block address (must be on word boundary) */ - SK_write_reg(CSR1, 0); /* Set low order bits 15:0 */ - SK_write_reg(CSR2, 0); /* Set high order bits 23:16 */ - - - PRINTK(("## %s: After setting CSR1-3. CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0))); - - /* Initialize LANCE */ - - /* - * INIT = Initialize, when set, causes the LANCE to begin the - * initialization procedure and access the Init Block. - */ - - SK_write_reg(CSR0, CSR0_INIT); - - spin_unlock_irqrestore(&SK_lock, flags); - - /* Wait until LANCE finished initialization */ - - SK_set_RAP(CSR0); /* Register Address Pointer to CSR0 */ - - for (i = 0; (i < 100) && !(SK_rread_reg() & CSR0_IDON); i++) - ; /* Wait until init done or go ahead if problems (i>=100) */ - - if (i >= 100) /* Something is wrong ! */ - { - printk("%s: can't init am7990, status: %04x " - "init_block: %#08x\n", - dev->name, (int) SK_read_reg(CSR0), - (unsigned int) &(p->ram)->ib); - -#ifdef SK_DEBUG - SK_print_pos(dev, "LANCE INIT failed"); - SK_print_dev(dev,"Device Structure:"); -#endif - - return -1; /* LANCE init failed */ - } - - PRINTK(("## %s: init done after %d ticks\n", SK_NAME, i)); - - /* Clear Initialize done, enable Interrupts, start LANCE */ - - SK_write_reg(CSR0, CSR0_IDON | CSR0_INEA | CSR0_STRT); - - PRINTK(("## %s: LANCE started. CSR0: %#06x\n", SK_NAME, - SK_read_reg(CSR0))); - - return 0; /* LANCE is up and running */ - -} /* End of SK_lance_init() */ - - - -/*- - * Function : SK_send_packet - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/27 - * - * Description : Writes an socket buffer into a transmit descriptor - * and starts transmission. - * - * Parameters : I : struct sk_buff *skb - packet to transfer - * I : struct net_device *dev - SK_G16 device structure - * Return Value : 0 - OK - * 1 - Could not transmit (dev_queue_xmit will queue it) - * and try to sent it later - * Globals : None - * Side Effects : None - * Update History : - * YY/MM/DD uid Description --*/ - -static void SK_timeout(struct net_device *dev) -{ - printk(KERN_WARNING "%s: xmitter timed out, try to restart!\n", dev->name); - SK_lance_init(dev, MODE_NORMAL); /* Reinit LANCE */ - netif_wake_queue(dev); /* Clear Transmitter flag */ - dev->trans_start = jiffies; /* Mark Start of transmission */ -} - -static int SK_send_packet(struct sk_buff *skb, struct net_device *dev) -{ - struct priv *p = netdev_priv(dev); - struct tmd *tmdp; - static char pad[64]; - - PRINTK2(("## %s: SK_send_packet() called, CSR0 %#04x.\n", - SK_NAME, SK_read_reg(CSR0))); - - - /* - * Block a timer-based transmit from overlapping. - * This means check if we are already in. - */ - - netif_stop_queue (dev); - - { - - /* Evaluate Packet length */ - short len = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN; - - tmdp = p->tmdhead + p->tmdnum; /* Which descriptor for transmitting */ - - /* Fill in Transmit Message Descriptor */ - - /* Copy data into dual ported ram */ - - memcpy_toio((tmdp->u.buffer & 0x00ffffff), skb->data, skb->len); - if (len != skb->len) - memcpy_toio((tmdp->u.buffer & 0x00ffffff) + skb->len, pad, len-skb->len); - - writew(-len, &tmdp->blen); /* set length to transmit */ - - /* - * Packet start and end is always set because we use the maximum - * packet length as buffer length. - * Relinquish ownership to LANCE - */ - - writeb(TX_OWN | TX_STP | TX_ENP, &tmdp->u.s.status); - - /* Start Demand Transmission */ - SK_write_reg(CSR0, CSR0_TDMD | CSR0_INEA); - - dev->trans_start = jiffies; /* Mark start of transmission */ - - /* Set pointer to next transmit buffer */ - p->tmdnum++; - p->tmdnum &= TMDNUM-1; - - /* Do we own the next transmit buffer ? */ - if (! (readb(&((p->tmdhead + p->tmdnum)->u.s.status)) & TX_OWN) ) - { - /* - * We own next buffer and are ready to transmit, so - * clear busy flag - */ - netif_start_queue(dev); - } - - p->stats.tx_bytes += skb->len; - - } - - dev_kfree_skb(skb); - return 0; -} /* End of SK_send_packet */ - - -/*- - * Function : SK_interrupt - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/27 - * - * Description : SK_G16 interrupt handler which checks for LANCE - * Errors, handles transmit and receive interrupts - * - * Parameters : I : int irq, void *dev_id, struct pt_regs * regs - - * Return Value : None - * Errors : None - * Globals : None - * Side Effects : None - * Update History : - * YY/MM/DD uid Description --*/ - -static irqreturn_t SK_interrupt(int irq, void *dev_id, struct pt_regs * regs) -{ - int csr0; - struct net_device *dev = dev_id; - struct priv *p = netdev_priv(dev); - - - PRINTK2(("## %s: SK_interrupt(). status: %#06x\n", - SK_NAME, SK_read_reg(CSR0))); - - if (dev == NULL) - { - printk("SK_interrupt(): IRQ %d for unknown device.\n", irq); - } - - spin_lock (&SK_lock); - - csr0 = SK_read_reg(CSR0); /* store register for checking */ - - /* - * Acknowledge all of the current interrupt sources, disable - * Interrupts (INEA = 0) - */ - - SK_write_reg(CSR0, csr0 & CSR0_CLRALL); - - if (csr0 & CSR0_ERR) /* LANCE Error */ - { - printk("%s: error: %04x\n", dev->name, csr0); - - if (csr0 & CSR0_MISS) /* No place to store packet ? */ - { - p->stats.rx_dropped++; - } - } - - if (csr0 & CSR0_RINT) /* Receive Interrupt (packet arrived) */ - { - SK_rxintr(dev); - } - - if (csr0 & CSR0_TINT) /* Transmit interrupt (packet sent) */ - { - SK_txintr(dev); - } - - SK_write_reg(CSR0, CSR0_INEA); /* Enable Interrupts */ - - spin_unlock (&SK_lock); - return IRQ_HANDLED; -} /* End of SK_interrupt() */ - - -/*- - * Function : SK_txintr - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/27 - * - * Description : After sending a packet we check status, update - * statistics and relinquish ownership of transmit - * descriptor ring. - * - * Parameters : I : struct net_device *dev - SK_G16 device structure - * Return Value : None - * Errors : None - * Globals : None - * Update History : - * YY/MM/DD uid Description --*/ - -static void SK_txintr(struct net_device *dev) -{ - int tmdstat; - struct tmd *tmdp; - struct priv *p = netdev_priv(dev); - - - PRINTK2(("## %s: SK_txintr() status: %#06x\n", - SK_NAME, SK_read_reg(CSR0))); - - tmdp = p->tmdhead + p->tmdlast; /* Which buffer we sent at last ? */ - - /* Set next buffer */ - p->tmdlast++; - p->tmdlast &= TMDNUM-1; - - tmdstat = readb(&tmdp->u.s.status); - - /* - * We check status of transmitted packet. - * see LANCE data-sheet for error explanation - */ - if (tmdstat & TX_ERR) /* Error occurred */ - { - int stat2 = readw(&tmdp->status2); - - printk("%s: TX error: %04x %04x\n", dev->name, tmdstat, stat2); - - if (stat2 & TX_TDR) /* TDR problems? */ - { - printk("%s: tdr-problems \n", dev->name); - } - - if (stat2 & TX_RTRY) /* Failed in 16 attempts to transmit ? */ - p->stats.tx_aborted_errors++; - if (stat2 & TX_LCOL) /* Late collision ? */ - p->stats.tx_window_errors++; - if (stat2 & TX_LCAR) /* Loss of Carrier ? */ - p->stats.tx_carrier_errors++; - if (stat2 & TX_UFLO) /* Underflow error ? */ - { - p->stats.tx_fifo_errors++; - - /* - * If UFLO error occurs it will turn transmitter of. - * So we must reinit LANCE - */ - - SK_lance_init(dev, MODE_NORMAL); - } - - p->stats.tx_errors++; - - writew(0, &tmdp->status2); /* Clear error flags */ - } - else if (tmdstat & TX_MORE) /* Collisions occurred ? */ - { - /* - * Here I have a problem. - * I only know that there must be one or up to 15 collisions. - * That's why TX_MORE is set, because after 16 attempts TX_RTRY - * will be set which means couldn't send packet aborted transfer. - * - * First I did not have this in but then I thought at minimum - * we see that something was not ok. - * If anyone knows something better than this to handle this - * please report it. - */ - - p->stats.collisions++; - } - else /* Packet sent without any problems */ - { - p->stats.tx_packets++; - } - - /* - * We mark transmitter not busy anymore, because now we have a free - * transmit descriptor which can be filled by SK_send_packet and - * afterwards sent by the LANCE - * - * The function which do handle slow IRQ parts is do_bottom_half() - * which runs at normal kernel priority, that means all interrupt are - * enabled. (see kernel/irq.c) - * - * net_bh does something like this: - * - check if already in net_bh - * - try to transmit something from the send queue - * - if something is in the receive queue send it up to higher - * levels if it is a known protocol - * - try to transmit something from the send queue - */ - - netif_wake_queue(dev); - -} /* End of SK_txintr() */ - - -/*- - * Function : SK_rxintr - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/27 - * - * Description : Buffer sent, check for errors, relinquish ownership - * of the receive message descriptor. - * - * Parameters : I : SK_G16 device structure - * Return Value : None - * Globals : None - * Update History : - * YY/MM/DD uid Description --*/ - -static void SK_rxintr(struct net_device *dev) -{ - - struct rmd *rmdp; - int rmdstat; - struct priv *p = netdev_priv(dev); - - PRINTK2(("## %s: SK_rxintr(). CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0))); - - rmdp = p->rmdhead + p->rmdnum; - - /* As long as we own the next entry, check status and send - * it up to higher layer - */ - - while (!( (rmdstat = readb(&rmdp->u.s.status)) & RX_OWN)) - { - /* - * Start and end of packet must be set, because we use - * the ethernet maximum packet length (1518) as buffer size. - * - * Because our buffers are at maximum OFLO and BUFF errors are - * not to be concerned (see Data sheet) - */ - - if ((rmdstat & (RX_STP | RX_ENP)) != (RX_STP | RX_ENP)) - { - /* Start of a frame > 1518 Bytes ? */ - - if (rmdstat & RX_STP) - { - p->stats.rx_errors++; /* bad packet received */ - p->stats.rx_length_errors++; /* packet too long */ - - printk("%s: packet too long\n", dev->name); - } - - /* - * All other packets will be ignored until a new frame with - * start (RX_STP) set follows. - * - * What we do is just give descriptor free for new incoming - * packets. - */ - - writeb(RX_OWN, &rmdp->u.s.status); /* Relinquish ownership to LANCE */ - - } - else if (rmdstat & RX_ERR) /* Receive Error ? */ - { - printk("%s: RX error: %04x\n", dev->name, (int) rmdstat); - - p->stats.rx_errors++; - - if (rmdstat & RX_FRAM) p->stats.rx_frame_errors++; - if (rmdstat & RX_CRC) p->stats.rx_crc_errors++; - - writeb(RX_OWN, &rmdp->u.s.status); /* Relinquish ownership to LANCE */ - - } - else /* We have a packet which can be queued for the upper layers */ - { - - int len = readw(&rmdp->mlen) & 0x0fff; /* extract message length from receive buffer */ - struct sk_buff *skb; - - skb = dev_alloc_skb(len+2); /* allocate socket buffer */ - - if (skb == NULL) /* Could not get mem ? */ - { - - /* - * Couldn't allocate sk_buffer so we give descriptor back - * to Lance, update statistics and go ahead. - */ - - writeb(RX_OWN, &rmdp->u.s.status); /* Relinquish ownership to LANCE */ - printk("%s: Couldn't allocate sk_buff, deferring packet.\n", - dev->name); - p->stats.rx_dropped++; - - break; /* Jump out */ - } - - /* Prepare sk_buff to queue for upper layers */ - - skb->dev = dev; - skb_reserve(skb,2); /* Align IP header on 16 byte boundary */ - - /* - * Copy data out of our receive descriptor into sk_buff. - * - * (rmdp->u.buffer & 0x00ffffff) -> get address of buffer and - * ignore status fields) - */ - - memcpy_fromio(skb_put(skb,len), (rmdp->u.buffer & 0x00ffffff), len); - - - /* - * Notify the upper protocol layers that there is another packet - * to handle - * - * netif_rx() always succeeds. see /net/inet/dev.c for more. - */ - - skb->protocol=eth_type_trans(skb,dev); - netif_rx(skb); /* queue packet and mark it for processing */ - - /* - * Packet is queued and marked for processing so we - * free our descriptor and update statistics - */ - - writeb(RX_OWN, &rmdp->u.s.status); - dev->last_rx = jiffies; - p->stats.rx_packets++; - p->stats.rx_bytes += len; - - - p->rmdnum++; - p->rmdnum %= RMDNUM; - - rmdp = p->rmdhead + p->rmdnum; - } - } -} /* End of SK_rxintr() */ - - -/*- - * Function : SK_close - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/26 - * - * Description : close gets called from dev_close() and should - * deinstall the card (free_irq, mem etc). - * - * Parameters : I : struct net_device *dev - our device structure - * Return Value : 0 - closed device driver - * Errors : None - * Globals : None - * Update History : - * YY/MM/DD uid Description --*/ - -/* I have tried to set BOOT_ROM on and RAM off but then, after a 'ifconfig - * down' the system stops. So I don't shut set card to init state. - */ - -static int SK_close(struct net_device *dev) -{ - - PRINTK(("## %s: SK_close(). CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0))); - - netif_stop_queue(dev); /* Transmitter busy */ - - printk("%s: Shutting %s down CSR0 %#06x\n", dev->name, SK_NAME, - (int) SK_read_reg(CSR0)); - - SK_write_reg(CSR0, CSR0_STOP); /* STOP the LANCE */ - - free_irq(dev->irq, dev); /* Free IRQ */ - - return 0; /* always succeed */ - -} /* End of SK_close() */ - - -/*- - * Function : SK_get_stats - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/26 - * - * Description : Return current status structure to upper layers. - * It is called by sprintf_stats (dev.c). - * - * Parameters : I : struct net_device *dev - our device structure - * Return Value : struct net_device_stats * - our current statistics - * Errors : None - * Side Effects : None - * Update History : - * YY/MM/DD uid Description --*/ - -static struct net_device_stats *SK_get_stats(struct net_device *dev) -{ - - struct priv *p = netdev_priv(dev); - - PRINTK(("## %s: SK_get_stats(). CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0))); - - return &p->stats; /* Return Device status */ - -} /* End of SK_get_stats() */ - - -/*- - * Function : set_multicast_list - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/26 - * - * Description : This function gets called when a program performs - * a SIOCSIFFLAGS call. Ifconfig does this if you call - * 'ifconfig [-]allmulti' which enables or disables the - * Promiscuous mode. - * Promiscuous mode is when the Network card accepts all - * packets, not only the packets which match our MAC - * Address. It is useful for writing a network monitor, - * but it is also a security problem. You have to remember - * that all information on the net is not encrypted. - * - * Parameters : I : struct net_device *dev - SK_G16 device Structure - * Return Value : None - * Errors : None - * Globals : None - * Update History : - * YY/MM/DD uid Description - * 95/10/18 ACox New multicast calling scheme --*/ - - -/* Set or clear the multicast filter for SK_G16. - */ - -static void set_multicast_list(struct net_device *dev) -{ - - if (dev->flags&IFF_PROMISC) - { - /* Reinitialize LANCE with MODE_PROM set */ - SK_lance_init(dev, MODE_PROM); - } - else if (dev->mc_count==0 && !(dev->flags&IFF_ALLMULTI)) - { - /* Reinitialize LANCE without MODE_PROM */ - SK_lance_init(dev, MODE_NORMAL); - } - else - { - /* Multicast with logical address filter on */ - /* Reinitialize LANCE without MODE_PROM */ - SK_lance_init(dev, MODE_NORMAL); - - /* Not implemented yet. */ - } -} /* End of set_multicast_list() */ - - - -/*- - * Function : SK_rom_addr - * Author : Patrick J.D. Weichmann - * Date Created : 94/06/01 - * - * Description : Try to find a Boot_ROM at all possible locations - * - * Parameters : None - * Return Value : Address where Boot_ROM is - * Errors : 0 - Did not find Boot_ROM - * Globals : None - * Update History : - * YY/MM/DD uid Description --*/ - -unsigned int __init SK_rom_addr(void) -{ - int i,j; - int rom_found = 0; - unsigned int rom_location[] = SK_BOOT_ROM_LOCATIONS; - unsigned char rom_id[] = SK_BOOT_ROM_ID; - unsigned char test_byte; - - /* Autodetect Boot_ROM */ - PRINTK(("## %s: Autodetection of Boot_ROM\n", SK_NAME)); - - for (i = 0; (rom_location[i] != 0) && (rom_found == 0); i++) - { - - PRINTK(("## Trying ROM location %#08x", rom_location[i])); - - rom_found = 1; - for (j = 0; j < 6; j++) - { - test_byte = readb(rom_location[i]+j); - PRINTK((" %02x ", *test_byte)); - - if(test_byte != rom_id[j]) - { - rom_found = 0; - } - } - PRINTK(("\n")); - } - - if (rom_found == 1) - { - PRINTK(("## %s: Boot_ROM found at %#08x\n", - SK_NAME, rom_location[(i-1)])); - - return (rom_location[--i]); - } - else - { - PRINTK(("%s: No Boot_ROM found\n", SK_NAME)); - return 0; - } -} /* End of SK_rom_addr() */ - - - -/* LANCE access functions - * - * ! CSR1-3 can only be accessed when in CSR0 the STOP bit is set ! - */ - - -/*- - * Function : SK_reset_board - * - * Author : Patrick J.D. Weichmann - * - * Date Created : 94/05/25 - * - * Description : This function resets SK_G16 and all components, but - * POS registers are not changed - * - * Parameters : None - * Return Value : None - * Errors : None - * Globals : SK_RAM *board - SK_RAM structure pointer - * - * Update History : - * YY/MM/DD uid Description --*/ - -void SK_reset_board(void) -{ - writeb(0x00, SK_PORT); /* Reset active */ - mdelay(5); /* Delay min 5ms */ - writeb(SK_RESET, SK_PORT); /* Set back to normal operation */ - -} /* End of SK_reset_board() */ - - -/*- - * Function : SK_set_RAP - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/25 - * - * Description : Set LANCE Register Address Port to register - * for later data transfer. - * - * Parameters : I : reg_number - which CSR to read/write from/to - * Return Value : None - * Errors : None - * Globals : SK_RAM *board - SK_RAM structure pointer - * Update History : - * YY/MM/DD uid Description --*/ - -void SK_set_RAP(int reg_number) -{ - writew(reg_number, SK_IOREG); - writeb(SK_RESET | SK_RAP | SK_WREG, SK_PORT); - writeb(SK_DOIO, SK_IOCOM); - - while (readb(SK_PORT) & SK_IORUN) - barrier(); -} /* End of SK_set_RAP() */ - - -/*- - * Function : SK_read_reg - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/25 - * - * Description : Set RAP and read data from a LANCE CSR register - * - * Parameters : I : reg_number - which CSR to read from - * Return Value : Register contents - * Errors : None - * Globals : SK_RAM *board - SK_RAM structure pointer - * Update History : - * YY/MM/DD uid Description --*/ - -int SK_read_reg(int reg_number) -{ - SK_set_RAP(reg_number); - - writeb(SK_RESET | SK_RDATA | SK_RREG, SK_PORT); - writeb(SK_DOIO, SK_IOCOM); - - while (readb(SK_PORT) & SK_IORUN) - barrier(); - return (readw(SK_IOREG)); - -} /* End of SK_read_reg() */ - - -/*- - * Function : SK_rread_reg - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/28 - * - * Description : Read data from preseted register. - * This function requires that you know which - * Register is actually set. Be aware that CSR1-3 - * can only be accessed when in CSR0 STOP is set. - * - * Return Value : Register contents - * Errors : None - * Globals : SK_RAM *board - SK_RAM structure pointer - * Update History : - * YY/MM/DD uid Description --*/ - -int SK_rread_reg(void) -{ - writeb(SK_RESET | SK_RDATA | SK_RREG, SK_PORT); - - writeb(SK_DOIO, SK_IOCOM); - - while (readb(SK_PORT) & SK_IORUN) - barrier(); - return (readw(SK_IOREG)); - -} /* End of SK_rread_reg() */ - - -/*- - * Function : SK_write_reg - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/25 - * - * Description : This function sets the RAP then fills in the - * LANCE I/O Reg and starts Transfer to LANCE. - * It waits until transfer has ended which is max. 7 ms - * and then it returns. - * - * Parameters : I : reg_number - which CSR to write to - * I : value - what value to fill into register - * Return Value : None - * Errors : None - * Globals : SK_RAM *board - SK_RAM structure pointer - * Update History : - * YY/MM/DD uid Description --*/ - -void SK_write_reg(int reg_number, int value) -{ - SK_set_RAP(reg_number); - - writew(value, SK_IOREG); - writeb(SK_RESET | SK_RDATA | SK_WREG, SK_PORT); - writeb(SK_DOIO, SK_IOCOM); - - while (readb(SK_PORT) & SK_IORUN) - barrier(); -} /* End of SK_write_reg */ - - - -/* - * Debugging functions - * ------------------- - */ - -/*- - * Function : SK_print_pos - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/25 - * - * Description : This function prints out the 4 POS (Programmable - * Option Select) Registers. Used mainly to debug operation. - * - * Parameters : I : struct net_device *dev - SK_G16 device structure - * I : char * - Text which will be printed as title - * Return Value : None - * Errors : None - * Update History : - * YY/MM/DD uid Description --*/ - -void SK_print_pos(struct net_device *dev, char *text) -{ - int ioaddr = dev->base_addr; - - unsigned char pos0 = inb(SK_POS0), - pos1 = inb(SK_POS1), - pos2 = inb(SK_POS2), - pos3 = inb(SK_POS3), - pos4 = inb(SK_POS4); - - - printk("## %s: %s.\n" - "## pos0=%#4x pos1=%#4x pos2=%#04x pos3=%#08x pos4=%#04x\n", - SK_NAME, text, pos0, pos1, pos2, (pos3<<14), pos4); - -} /* End of SK_print_pos() */ - - - -/*- - * Function : SK_print_dev - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/25 - * - * Description : This function simply prints out the important fields - * of the device structure. - * - * Parameters : I : struct net_device *dev - SK_G16 device structure - * I : char *text - Title for printing - * Return Value : None - * Errors : None - * Update History : - * YY/MM/DD uid Description --*/ - -void SK_print_dev(struct net_device *dev, char *text) -{ - if (dev == NULL) - { - printk("## %s: Device Structure. %s\n", SK_NAME, text); - printk("## DEVICE == NULL\n"); - } - else - { - printk("## %s: Device Structure. %s\n", SK_NAME, text); - printk("## Device Name: %s Base Address: %#06lx IRQ: %d\n", - dev->name, dev->base_addr, dev->irq); - - printk("## next device: %#08x init function: %#08x\n", - (int) dev->next, (int) dev->init); - } - -} /* End of SK_print_dev() */ - - - -/*- - * Function : SK_print_ram - * Author : Patrick J.D. Weichmann - * Date Created : 94/06/02 - * - * Description : This function is used to check how are things set up - * in the 16KB RAM. Also the pointers to the receive and - * transmit descriptor rings and rx and tx buffers locations. - * It contains a minor bug in printing, but has no effect to the values - * only newlines are not correct. - * - * Parameters : I : struct net_device *dev - SK_G16 device structure - * Return Value : None - * Errors : None - * Globals : None - * Update History : - * YY/MM/DD uid Description --*/ - -void __init SK_print_ram(struct net_device *dev) -{ - - int i; - struct priv *p = netdev_priv(dev); - - printk("## %s: RAM Details.\n" - "## RAM at %#08x tmdhead: %#08x rmdhead: %#08x initblock: %#08x\n", - SK_NAME, - (unsigned int) p->ram, - (unsigned int) p->tmdhead, - (unsigned int) p->rmdhead, - (unsigned int) &(p->ram)->ib); - - printk("## "); - - for(i = 0; i < TMDNUM; i++) - { - if (!(i % 3)) /* Every third line do a newline */ - { - printk("\n## "); - } - printk("tmdbufs%d: %#08x ", (i+1), (int) p->tmdbufs[i]); - } - printk("## "); - - for(i = 0; i < RMDNUM; i++) - { - if (!(i % 3)) /* Every third line do a newline */ - { - printk("\n## "); - } - printk("rmdbufs%d: %#08x ", (i+1), (int) p->rmdbufs[i]); - } - printk("\n"); - -} /* End of SK_print_ram() */ - diff --git a/drivers/net/sk_g16.h b/drivers/net/sk_g16.h deleted file mode 100644 index 0a5dc0908a0..00000000000 --- a/drivers/net/sk_g16.h +++ /dev/null @@ -1,165 +0,0 @@ -/*- - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - * Module : sk_g16.h - * Version : $Revision$ - * - * Author : M.Hipp (mhipp@student.uni-tuebingen.de) - * changes by : Patrick J.D. Weichmann - * - * Date Created : 94/05/25 - * - * Description : In here are all necessary definitions of - * the am7990 (LANCE) chip used for writing a - * network device driver which uses this chip - * - * $Log$ --*/ - -#ifndef SK_G16_H - -#define SK_G16_H - - -/* - * Control and Status Register 0 (CSR0) bit definitions - * - * (R=Readable) (W=Writeable) (S=Set on write) (C-Clear on write) - * - */ - -#define CSR0_ERR 0x8000 /* Error summary (R) */ -#define CSR0_BABL 0x4000 /* Babble transmitter timeout error (RC) */ -#define CSR0_CERR 0x2000 /* Collision Error (RC) */ -#define CSR0_MISS 0x1000 /* Missed packet (RC) */ -#define CSR0_MERR 0x0800 /* Memory Error (RC) */ -#define CSR0_RINT 0x0400 /* Receiver Interrupt (RC) */ -#define CSR0_TINT 0x0200 /* Transmit Interrupt (RC) */ -#define CSR0_IDON 0x0100 /* Initialization Done (RC) */ -#define CSR0_INTR 0x0080 /* Interrupt Flag (R) */ -#define CSR0_INEA 0x0040 /* Interrupt Enable (RW) */ -#define CSR0_RXON 0x0020 /* Receiver on (R) */ -#define CSR0_TXON 0x0010 /* Transmitter on (R) */ -#define CSR0_TDMD 0x0008 /* Transmit Demand (RS) */ -#define CSR0_STOP 0x0004 /* Stop (RS) */ -#define CSR0_STRT 0x0002 /* Start (RS) */ -#define CSR0_INIT 0x0001 /* Initialize (RS) */ - -#define CSR0_CLRALL 0x7f00 /* mask for all clearable bits */ - -/* - * Control and Status Register 3 (CSR3) bit definitions - * - */ - -#define CSR3_BSWAP 0x0004 /* Byte Swap (RW) */ -#define CSR3_ACON 0x0002 /* ALE Control (RW) */ -#define CSR3_BCON 0x0001 /* Byte Control (RW) */ - -/* - * Initialization Block Mode operation Bit Definitions. - */ - -#define MODE_PROM 0x8000 /* Promiscuous Mode */ -#define MODE_INTL 0x0040 /* Internal Loopback */ -#define MODE_DRTY 0x0020 /* Disable Retry */ -#define MODE_COLL 0x0010 /* Force Collision */ -#define MODE_DTCR 0x0008 /* Disable Transmit CRC) */ -#define MODE_LOOP 0x0004 /* Loopback */ -#define MODE_DTX 0x0002 /* Disable the Transmitter */ -#define MODE_DRX 0x0001 /* Disable the Receiver */ - -#define MODE_NORMAL 0x0000 /* Normal operation mode */ - -/* - * Receive message descriptor status bit definitions. - */ - -#define RX_OWN 0x80 /* Owner bit 0 = host, 1 = lance */ -#define RX_ERR 0x40 /* Error Summary */ -#define RX_FRAM 0x20 /* Framing Error */ -#define RX_OFLO 0x10 /* Overflow Error */ -#define RX_CRC 0x08 /* CRC Error */ -#define RX_BUFF 0x04 /* Buffer Error */ -#define RX_STP 0x02 /* Start of Packet */ -#define RX_ENP 0x01 /* End of Packet */ - - -/* - * Transmit message descriptor status bit definitions. - */ - -#define TX_OWN 0x80 /* Owner bit 0 = host, 1 = lance */ -#define TX_ERR 0x40 /* Error Summary */ -#define TX_MORE 0x10 /* More the 1 retry needed to Xmit */ -#define TX_ONE 0x08 /* One retry needed to Xmit */ -#define TX_DEF 0x04 /* Deferred */ -#define TX_STP 0x02 /* Start of Packet */ -#define TX_ENP 0x01 /* End of Packet */ - -/* - * Transmit status (2) (valid if TX_ERR == 1) - */ - -#define TX_BUFF 0x8000 /* Buffering error (no ENP) */ -#define TX_UFLO 0x4000 /* Underflow (late memory) */ -#define TX_LCOL 0x1000 /* Late collision */ -#define TX_LCAR 0x0400 /* Loss of Carrier */ -#define TX_RTRY 0x0200 /* Failed after 16 retransmissions */ -#define TX_TDR 0x003f /* Time-domain-reflectometer-value */ - - -/* - * Structures used for Communication with the LANCE - */ - -/* LANCE Initialize Block */ - -struct init_block -{ - unsigned short mode; /* Mode Register */ - unsigned char paddr[6]; /* Physical Address (MAC) */ - unsigned char laddr[8]; /* Logical Filter Address (not used) */ - unsigned int rdrp; /* Receive Descriptor Ring pointer */ - unsigned int tdrp; /* Transmit Descriptor Ring pointer */ -}; - - -/* Receive Message Descriptor Entry */ - -struct rmd -{ - union - { - unsigned long buffer; /* Address of buffer */ - struct - { - unsigned char unused[3]; - unsigned volatile char status; /* Status Bits */ - } s; - } u; - volatile short blen; /* Buffer Length (two's complement) */ - unsigned short mlen; /* Message Byte Count */ -}; - - -/* Transmit Message Descriptor Entry */ - -struct tmd -{ - union - { - unsigned long buffer; /* Address of buffer */ - struct - { - unsigned char unused[3]; - unsigned volatile char status; /* Status Bits */ - } s; - } u; - unsigned short blen; /* Buffer Length (two's complement) */ - unsigned volatile short status2; /* Error Status Bits */ -}; - -#endif /* End of SK_G16_H */ -- cgit v1.2.3 From d0e3e87ff4516d1b9d7bc6734a99168838f79635 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sat, 14 May 2005 17:29:58 +0200 Subject: [PATCH] orinoco: fix setting of 32 character ESSIDs Patch from Thomas Schulz Index: linux-2.6/drivers/net/wireless/orinoco.c =================================================================== --- drivers/net/wireless/orinoco.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index d910b89e648..76875dac9d6 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -2907,13 +2907,14 @@ static int orinoco_ioctl_setessid(struct net_device *dev, struct iw_point *erq) memset(&essidbuf, 0, sizeof(essidbuf)); if (erq->flags) { - if (erq->length > IW_ESSID_MAX_SIZE) + /* iwconfig includes the NUL in the specified length */ + if (erq->length > IW_ESSID_MAX_SIZE+1) return -E2BIG; if (copy_from_user(&essidbuf, erq->pointer, erq->length)) return -EFAULT; - essidbuf[erq->length] = '\0'; + essidbuf[IW_ESSID_MAX_SIZE] = '\0'; } if (orinoco_lock(priv, &flags) != 0) -- cgit v1.2.3 From 8551cb980086eb9952387a9f135d6f96af3b82ee Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sat, 14 May 2005 17:30:04 +0200 Subject: [PATCH] orinoco: disconnect the network device on reset errors Patch from Pavel Roskin Index: linux-2.6/drivers/net/wireless/orinoco.c =================================================================== --- drivers/net/wireless/orinoco.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index 76875dac9d6..48800b91448 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -1919,7 +1919,7 @@ static void orinoco_reset(struct net_device *dev) { struct orinoco_private *priv = netdev_priv(dev); struct hermes *hw = &priv->hw; - int err = 0; + int err; unsigned long flags; if (orinoco_lock(priv, &flags) != 0) @@ -1941,20 +1941,20 @@ static void orinoco_reset(struct net_device *dev) orinoco_unlock(priv, &flags); - if (priv->hard_reset) + if (priv->hard_reset) { err = (*priv->hard_reset)(priv); - if (err) { - printk(KERN_ERR "%s: orinoco_reset: Error %d " - "performing hard reset\n", dev->name, err); - /* FIXME: shutdown of some sort */ - return; + if (err) { + printk(KERN_ERR "%s: orinoco_reset: Error %d " + "performing hard reset\n", dev->name, err); + goto disable; + } } err = orinoco_reinit_firmware(dev); if (err) { printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n", dev->name, err); - return; + goto disable; } spin_lock_irq(&priv->lock); /* This has to be called from user context */ @@ -1975,6 +1975,10 @@ static void orinoco_reset(struct net_device *dev) spin_unlock_irq(&priv->lock); return; + disable: + hermes_set_irqmask(hw, 0); + netif_device_detach(dev); + printk(KERN_ERR "%s: Device has been disabled!\n", dev->name); } /********************************************************************/ -- cgit v1.2.3 From 649e59e6ab7817bf1c556b1898356c1a17aa2650 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sat, 14 May 2005 17:30:10 +0200 Subject: [PATCH] orinoco: Symbol 3.0x firmware needs broken_disableport Patch from Pavel Roskin. Index: linux-2.6/drivers/net/wireless/orinoco.c =================================================================== --- drivers/net/wireless/orinoco.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index 48800b91448..74ee47fd108 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -2222,6 +2222,8 @@ static int determine_firmware(struct net_device *dev) firmver >= 0x31000; priv->has_preamble = (firmver >= 0x20000); priv->ibss_port = 4; + priv->broken_disableport = (firmver == 0x25013) || + (firmver >= 0x30000 && firmver <= 0x31000); /* Tested with Intel firmware : 0x20015 => Jean II */ /* Tested with 3Com firmware : 0x15012 & 0x22001 => Jean II */ break; -- cgit v1.2.3 From ad8f451b41b3c3438ec4eef15527972bebd854eb Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sat, 14 May 2005 17:30:17 +0200 Subject: [PATCH] orinoco: make orinoco_stop() static Patch from Pavel Roskin Index: linux-2.6/drivers/net/wireless/orinoco.c =================================================================== --- drivers/net/wireless/orinoco.c | 3 +-- drivers/net/wireless/orinoco.h | 1 - 2 files changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index 74ee47fd108..cf55eca5586 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -657,7 +657,7 @@ static int orinoco_open(struct net_device *dev) return err; } -int orinoco_stop(struct net_device *dev) +static int orinoco_stop(struct net_device *dev) { struct orinoco_private *priv = netdev_priv(dev); int err = 0; @@ -4019,7 +4019,6 @@ EXPORT_SYMBOL(free_orinocodev); EXPORT_SYMBOL(__orinoco_up); EXPORT_SYMBOL(__orinoco_down); -EXPORT_SYMBOL(orinoco_stop); EXPORT_SYMBOL(orinoco_reinit_firmware); EXPORT_SYMBOL(orinoco_interrupt); diff --git a/drivers/net/wireless/orinoco.h b/drivers/net/wireless/orinoco.h index 13e42c2afb2..f749b50d108 100644 --- a/drivers/net/wireless/orinoco.h +++ b/drivers/net/wireless/orinoco.h @@ -119,7 +119,6 @@ extern struct net_device *alloc_orinocodev(int sizeof_card, extern void free_orinocodev(struct net_device *dev); extern int __orinoco_up(struct net_device *dev); extern int __orinoco_down(struct net_device *dev); -extern int orinoco_stop(struct net_device *dev); extern int orinoco_reinit_firmware(struct net_device *dev); extern irqreturn_t orinoco_interrupt(int irq, void * dev_id, struct pt_regs *regs); -- cgit v1.2.3 From 84d8a2fb56b1d3c915591a2c1aa321b783c7d00f Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sat, 14 May 2005 17:30:22 +0200 Subject: [PATCH] orinoco: misc fixes small fixes from CVS that didn't fit elsewhere Index: linux-2.6/drivers/net/wireless/orinoco.c =================================================================== --- drivers/net/wireless/orinoco.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index cf55eca5586..b1078baa1d5 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -1280,9 +1280,10 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) len = sizeof(tallies); } - /* Read directly the data (no seek) */ - hermes_read_words(hw, HERMES_DATA1, (void *) &tallies, - len / 2); /* FIXME: blech! */ + err = hermes_bap_pread(hw, IRQ_BAP, &tallies, len, + infofid, sizeof(info)); + if (err) + break; /* Increment our various counters */ /* wstats->discard.nwid - no wrong BSSID stuff */ @@ -1312,8 +1313,10 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) break; } - hermes_read_words(hw, HERMES_DATA1, (void *) &linkstatus, - len / 2); + err = hermes_bap_pread(hw, IRQ_BAP, &linkstatus, len, + infofid, sizeof(info)); + if (err) + break; newstatus = le16_to_cpu(linkstatus.linkstatus); connected = (newstatus == HERMES_LINKSTATUS_CONNECTED) @@ -1355,6 +1358,8 @@ int __orinoco_up(struct net_device *dev) struct hermes *hw = &priv->hw; int err; + netif_carrier_off(dev); /* just to make sure */ + err = __orinoco_program_rids(dev); if (err) { printk(KERN_ERR "%s: Error %d configuring card\n", @@ -2063,7 +2068,7 @@ irqreturn_t orinoco_interrupt(int irq, void *dev_id, struct pt_regs *regs) if (events & HERMES_EV_ALLOC) __orinoco_ev_alloc(dev, hw); - hermes_write_regn(hw, EVACK, events); + hermes_write_regn(hw, EVACK, evstat); evstat = hermes_read_regn(hw, EVSTAT); events = evstat & hw->inten; @@ -2440,7 +2445,7 @@ struct net_device *alloc_orinocodev(int sizeof_card, priv = netdev_priv(dev); priv->ndev = dev; if (sizeof_card) - priv->card = (void *)((unsigned long)netdev_priv(dev) + priv->card = (void *)((unsigned long)priv + sizeof(struct orinoco_private)); else priv->card = NULL; @@ -2545,6 +2550,7 @@ static int orinoco_hw_get_essid(struct orinoco_private *priv, int *active, } len = le16_to_cpu(essidbuf.len); + BUG_ON(len > IW_ESSID_MAX_SIZE); memset(buf, 0, IW_ESSID_MAX_SIZE+1); memcpy(buf, p, len); -- cgit v1.2.3 From f27eff1ffd65236b8e421188f76ad1b0b94e06eb Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 12 May 2005 17:47:27 +1000 Subject: [PATCH] iseries_veth: Don't send packets to LPARs which aren't up Hi Andrew, Jeff, The iseries_veth driver has a logic bug which means it will erroneously send packets to LPARs for which we don't have a connection. This usually isn't a big problem because the Hypervisor call fails gracefully and we return, but if packets are TX'ed during the negotiation of the connection bad things might happen. Regardless, the right thing is to bail early if we know there's no connection. Signed-off-by: Michael Ellerman --- drivers/net/iseries_veth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c index 855f8b2cf13..7d0ef2969b4 100644 --- a/drivers/net/iseries_veth.c +++ b/drivers/net/iseries_veth.c @@ -924,7 +924,7 @@ static int veth_transmit_to_one(struct sk_buff *skb, HvLpIndex rlp, spin_lock_irqsave(&cnx->lock, flags); - if (! cnx->state & VETH_STATE_READY) + if (! (cnx->state & VETH_STATE_READY)) goto drop; if ((skb->len - 14) > VETH_MAX_MTU) -- cgit v1.2.3 From eb235aef724568ae15af831968000cf9a3974b26 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 12 May 2005 17:53:18 +1000 Subject: [PATCH] iseries_veth: Set dev->trans_start so watchdog timer works right Hi Andrew, Jeff, The iseries_veth driver doesn't set dev->trans_start in it's TX path. This will cause the net device watchdog timer to fire earlier than we want it to, which causes the driver to needlessly reset its connections to other LPARs. Signed-off-by: Michael Ellerman --- drivers/net/iseries_veth.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c index 7d0ef2969b4..1e869df656c 100644 --- a/drivers/net/iseries_veth.c +++ b/drivers/net/iseries_veth.c @@ -1023,6 +1023,8 @@ static int veth_start_xmit(struct sk_buff *skb, struct net_device *dev) lpmask = veth_transmit_to_many(skb, lpmask, dev); + dev->trans_start = jiffies; + if (! lpmask) { dev_kfree_skb(skb); } else { -- cgit v1.2.3 From 41664c03f6c96a1f8a91714309b36f1b5ca85610 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 12 May 2005 17:55:08 +1000 Subject: [PATCH] iseries_veth: Don't leak skbs in RX path Hi Andrew, Jeff, Under some strange circumstances the iseries_veth driver can leak skbs. Fix is simply to call dev_kfree_skb() in the right place. Fix up the comment as well. Signed-off-by: Michael Ellerman --- drivers/net/iseries_veth.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c index 1e869df656c..1edecb10993 100644 --- a/drivers/net/iseries_veth.c +++ b/drivers/net/iseries_veth.c @@ -1264,13 +1264,18 @@ static void veth_receive(struct veth_lpar_connection *cnx, vlan = skb->data[9]; dev = veth_dev[vlan]; - if (! dev) - /* Some earlier versions of the driver sent - broadcasts down all connections, even to - lpars that weren't on the relevant vlan. - So ignore packets belonging to a vlan we're - not on. */ + if (! dev) { + /* + * Some earlier versions of the driver sent + * broadcasts down all connections, even to lpars + * that weren't on the relevant vlan. So ignore + * packets belonging to a vlan we're not on. + * We can also be here if we receive packets while + * the driver is going down, because then dev is NULL. + */ + dev_kfree_skb_irq(skb); continue; + } port = (struct veth_port *)dev->priv; dest = *((u64 *) skb->data) & 0xFFFFFFFFFFFF0000; -- cgit v1.2.3 From b2e0852e1eee7c445b1789bef41204b64f981102 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 12 May 2005 18:09:45 +1000 Subject: [PATCH] iseries_veth: Cleanup skbs to prevent unregister_netdevice() hanging Hi Andrew, Jeff, The iseries_veth driver is badly behaved in that it will keep TX packets hanging around forever if they're not ACK'ed and the queue never fills up. This causes the unregister_netdevice code to wait forever when we try to take the device down, because there's still skbs around with references to our struct net_device. There's already code to cleanup any un-ACK'ed packets in veth_stop_connection() but it's being called after we unregister the net_device, which is too late. The fix is to rearrange the module exit function so that we cleanup any outstanding skbs and then unregister the driver. Signed-off-by: Michael Ellerman --- drivers/net/iseries_veth.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c index 1edecb10993..13ed8dc1e91 100644 --- a/drivers/net/iseries_veth.c +++ b/drivers/net/iseries_veth.c @@ -1388,18 +1388,25 @@ void __exit veth_module_cleanup(void) { int i; - vio_unregister_driver(&veth_driver); + /* Stop the queues first to stop any new packets being sent. */ + for (i = 0; i < HVMAXARCHITECTEDVIRTUALLANS; i++) + if (veth_dev[i]) + netif_stop_queue(veth_dev[i]); + /* Stop the connections before we unregister the driver. This + * ensures there's no skbs lying around holding the device open. */ for (i = 0; i < HVMAXARCHITECTEDLPS; ++i) veth_stop_connection(i); HvLpEvent_unregisterHandler(HvLpEvent_Type_VirtualLan); /* Hypervisor callbacks may have scheduled more work while we - * were destroying connections. Now that we've disconnected from + * were stoping connections. Now that we've disconnected from * the hypervisor make sure everything's finished. */ flush_scheduled_work(); + vio_unregister_driver(&veth_driver); + for (i = 0; i < HVMAXARCHITECTEDLPS; ++i) veth_destroy_connection(i); -- cgit v1.2.3 From 22c6d143f33f10721216a8cfa3a83f7edfc2bd4e Mon Sep 17 00:00:00 2001 From: Manfred Spraul Date: Tue, 19 Apr 2005 21:17:09 +0200 Subject: [PATCH] forcedeth: Update error handling Ayaz wrote an update to the error handling for forcedeth (which I modified heavily, thus all bugs are mine): The ERROR4 bit is not a fatal error, it just indicates a mismatch between the actual packet len and the len according to the 802.3 header. The patch adds proper handling. The patch also removes the code that drops all packets with RX_ERROR & (!RX_FRAMINGERR): ERROR4 errors are also not fatal. --- drivers/net/forcedeth.c | 93 ++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 76 insertions(+), 17 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index c93f3d08dc4..4ebcd052e15 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -81,6 +81,7 @@ * cause DMA to kfree'd memory. * 0.31: 14 Nov 2004: ethtool support for getting/setting link * capabilities. + * 0.32: 16 Apr 2005: RX_ERROR4 handling added. * * Known bugs: * We suspect that on some hardware no TX done interrupts are generated. @@ -92,7 +93,7 @@ * DEV_NEED_TIMERIRQ will not harm you on sane hardware, only generating a few * superfluous timer interrupts from the nic. */ -#define FORCEDETH_VERSION "0.31" +#define FORCEDETH_VERSION "0.32" #define DRV_NAME "forcedeth" #include @@ -109,6 +110,7 @@ #include #include #include +#include #include #include @@ -1013,6 +1015,59 @@ static void nv_tx_timeout(struct net_device *dev) spin_unlock_irq(&np->lock); } +/* + * Called when the nic notices a mismatch between the actual data len on the + * wire and the len indicated in the 802 header + */ +static int nv_getlen(struct net_device *dev, void *packet, int datalen) +{ + int hdrlen; /* length of the 802 header */ + int protolen; /* length as stored in the proto field */ + + /* 1) calculate len according to header */ + if ( ((struct vlan_ethhdr *)packet)->h_vlan_proto == __constant_htons(ETH_P_8021Q)) { + protolen = ntohs( ((struct vlan_ethhdr *)packet)->h_vlan_encapsulated_proto ); + hdrlen = VLAN_HLEN; + } else { + protolen = ntohs( ((struct ethhdr *)packet)->h_proto); + hdrlen = ETH_HLEN; + } + dprintk(KERN_DEBUG "%s: nv_getlen: datalen %d, protolen %d, hdrlen %d\n", + dev->name, datalen, protolen, hdrlen); + if (protolen > ETH_DATA_LEN) + return datalen; /* Value in proto field not a len, no checks possible */ + + protolen += hdrlen; + /* consistency checks: */ + if (datalen > ETH_ZLEN) { + if (datalen >= protolen) { + /* more data on wire than in 802 header, trim of + * additional data. + */ + dprintk(KERN_DEBUG "%s: nv_getlen: accepting %d bytes.\n", + dev->name, protolen); + return protolen; + } else { + /* less data on wire than mentioned in header. + * Discard the packet. + */ + dprintk(KERN_DEBUG "%s: nv_getlen: discarding long packet.\n", + dev->name); + return -1; + } + } else { + /* short packet. Accept only if 802 values are also short */ + if (protolen > ETH_ZLEN) { + dprintk(KERN_DEBUG "%s: nv_getlen: discarding short packet.\n", + dev->name); + return -1; + } + dprintk(KERN_DEBUG "%s: nv_getlen: accepting %d bytes.\n", + dev->name, datalen); + return datalen; + } +} + static void nv_rx_process(struct net_device *dev) { struct fe_priv *np = get_nvpriv(dev); @@ -1064,7 +1119,7 @@ static void nv_rx_process(struct net_device *dev) np->stats.rx_errors++; goto next_pkt; } - if (Flags & (NV_RX_ERROR1|NV_RX_ERROR2|NV_RX_ERROR3|NV_RX_ERROR4)) { + if (Flags & (NV_RX_ERROR1|NV_RX_ERROR2|NV_RX_ERROR3)) { np->stats.rx_errors++; goto next_pkt; } @@ -1078,22 +1133,24 @@ static void nv_rx_process(struct net_device *dev) np->stats.rx_errors++; goto next_pkt; } - if (Flags & NV_RX_ERROR) { - /* framing errors are soft errors, the rest is fatal. */ - if (Flags & NV_RX_FRAMINGERR) { - if (Flags & NV_RX_SUBSTRACT1) { - len--; - } - } else { + if (Flags & NV_RX_ERROR4) { + len = nv_getlen(dev, np->rx_skbuff[i]->data, len); + if (len < 0) { np->stats.rx_errors++; goto next_pkt; } } + /* framing errors are soft errors. */ + if (Flags & NV_RX_FRAMINGERR) { + if (Flags & NV_RX_SUBSTRACT1) { + len--; + } + } } else { if (!(Flags & NV_RX2_DESCRIPTORVALID)) goto next_pkt; - if (Flags & (NV_RX2_ERROR1|NV_RX2_ERROR2|NV_RX2_ERROR3|NV_RX2_ERROR4)) { + if (Flags & (NV_RX2_ERROR1|NV_RX2_ERROR2|NV_RX2_ERROR3)) { np->stats.rx_errors++; goto next_pkt; } @@ -1107,17 +1164,19 @@ static void nv_rx_process(struct net_device *dev) np->stats.rx_errors++; goto next_pkt; } - if (Flags & NV_RX2_ERROR) { - /* framing errors are soft errors, the rest is fatal. */ - if (Flags & NV_RX2_FRAMINGERR) { - if (Flags & NV_RX2_SUBSTRACT1) { - len--; - } - } else { + if (Flags & NV_RX2_ERROR4) { + len = nv_getlen(dev, np->rx_skbuff[i]->data, len); + if (len < 0) { np->stats.rx_errors++; goto next_pkt; } } + /* framing errors are soft errors */ + if (Flags & NV_RX2_FRAMINGERR) { + if (Flags & NV_RX2_SUBSTRACT1) { + len--; + } + } Flags &= NV_RX2_CHECKSUMMASK; if (Flags == NV_RX2_CHECKSUMOK1 || Flags == NV_RX2_CHECKSUMOK2 || -- cgit v1.2.3 From e885b5e83965c320e8eff1ec3ebfbf821b375568 Mon Sep 17 00:00:00 2001 From: "simon@thekelleys.org.uk" Date: Sat, 7 May 2005 21:33:31 +0100 Subject: [PATCH] atmel wireless Below is a one-liner for the atmel wireless driver, just adding another card to the table. --- drivers/net/wireless/atmel_cs.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index a91b507e0a7..a4ed28d9c78 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -321,6 +321,7 @@ static struct { { 0x01bf, 0x3302, NULL, ATMEL_FW_TYPE_502E, "Belkin F5D6020-V2" }, { 0, 0, "BT/Voyager 1020 Laptop Adapter", ATMEL_FW_TYPE_502, "BT Voyager 1020" }, { 0, 0, "IEEE 802.11b/Wireless LAN PC Card", ATMEL_FW_TYPE_502, "Siemens Gigaset PC Card II" }, + { 0, 0, "IEEE 802.11b/Wireless LAN Card S", ATMEL_FW_TYPE_504_2958, "Siemens Gigaset PC Card II" }, { 0, 0, "CNet/CNWLC 11Mbps Wireless PC Card V-5", ATMEL_FW_TYPE_502E, "CNet CNWLC-811ARL" }, { 0, 0, "Wireless/PC_CARD", ATMEL_FW_TYPE_502D, "Planet WL-3552" }, { 0, 0, "OEM/11Mbps Wireless LAN PC Card V-3", ATMEL_FW_TYPE_502, "OEM 11Mbps WLAN PCMCIA Card" }, -- cgit v1.2.3 From 760f86d78d92f39e2ceb55b40f0885eb755c8c2f Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sat, 16 Apr 2005 16:24:16 +1000 Subject: [PATCH] Fw: [Bugme-new] [Bug 4482] New: natsemi: incorrect initialization of IPv6 Neighbor-discovery multicast On Wed, Apr 13, 2005 at 05:36:42PM +0000, Andrew Morton wrote: > Summary: natsemi: incorrect initialization of IPv6 Neighbor- > discovery multicast I've got a pair of FA312 cards and this problem has bothered me for ages. This has finally prompted me to do something about it :) Turns out that somebody wasn't following the documentation. We were doing 16-bit writes to 32-bit registers which led to some addresses working and others not so lucky. This patch should fix the problem. Signed-off-by: Herbert Xu --- drivers/net/natsemi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c index 223bdadd4c0..babb59e146e 100644 --- a/drivers/net/natsemi.c +++ b/drivers/net/natsemi.c @@ -2433,9 +2433,9 @@ static void __set_rx_mode(struct net_device *dev) rx_mode = RxFilterEnable | AcceptBroadcast | AcceptMulticast | AcceptMyPhys; for (i = 0; i < 64; i += 2) { - writew(HASH_TABLE + i, ioaddr + RxFilterAddr); - writew((mc_filter[i+1]<<8) + mc_filter[i], - ioaddr + RxFilterData); + writel(HASH_TABLE + i, ioaddr + RxFilterAddr); + writel((mc_filter[i + 1] << 8) + mc_filter[i], + ioaddr + RxFilterData); } } writel(rx_mode, ioaddr + RxFilterAddr); -- cgit v1.2.3 From 41480af27a85d6008d9e11db8bc2730407c25e1d Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 10 May 2005 09:45:51 -0400 Subject: [PATCH] wireless/airo: WEXT and quality corrections This patch brings the airo driver into line with the current WEXT specification of signal quality. It also fixes the values used to determine signal quality and level for MPI & PCMCIA 350 cards. It turns out that BSSListRid.rssi was actually in dBm for 350 series cards, and that we can use the normalized signal strength reported by the card as our "quality" value, on a scale of 0 - 100. Since signal level values are in dBm for this driver, max_qual->level MUST be 0, as specified in the WEXT spec. This patch also uses the IW_QUAL constants new in WEXT version 17. Signed-off-by: Dan Williams --- drivers/net/wireless/airo.c | 150 ++++++++++++++++++++++++++++++-------------- 1 file changed, 104 insertions(+), 46 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index 463c789cdc7..fb10a2db63a 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -754,7 +754,7 @@ typedef struct { u8 zero; u8 ssidLen; u8 ssid[32]; - u16 rssi; + u16 dBm; #define CAP_ESS (1<<0) #define CAP_IBSS (1<<1) #define CAP_PRIVACY (1<<4) @@ -1125,6 +1125,9 @@ static int micsetup(struct airo_info *ai); static int encapsulate(struct airo_info *ai, etherHead *pPacket, MICBuffer *buffer, int len); static int decapsulate(struct airo_info *ai, MICBuffer *mic, etherHead *pPacket, u16 payLen); +static u8 airo_rssi_to_dbm (tdsRssiEntry *rssi_rid, u8 rssi); +static u8 airo_dbm_to_pct (tdsRssiEntry *rssi_rid, u8 dbm); + #include #endif @@ -1713,6 +1716,7 @@ static int readBSSListRid(struct airo_info *ai, int first, list->fh.dwell = le16_to_cpu(list->fh.dwell); list->dsChannel = le16_to_cpu(list->dsChannel); list->atimWindow = le16_to_cpu(list->atimWindow); + list->dBm = le16_to_cpu(list->dBm); return rc; } @@ -3245,7 +3249,10 @@ badrx: wstats.level = 0x100 - apriv->rssi[hdr.rssi[1]].rssidBm; else wstats.level = (hdr.rssi[1] + 321) / 2; - wstats.updated = 3; + wstats.noise = apriv->wstats.qual.noise; + wstats.updated = IW_QUAL_LEVEL_UPDATED + | IW_QUAL_QUAL_UPDATED + | IW_QUAL_NOISE_UPDATED; /* Update spy records */ wireless_spy_update(dev, sa, &wstats); } @@ -3588,7 +3595,10 @@ void mpi_receive_802_11 (struct airo_info *ai) wstats.level = 0x100 - ai->rssi[hdr.rssi[1]].rssidBm; else wstats.level = (hdr.rssi[1] + 321) / 2; - wstats.updated = 3; + wstats.noise = ai->wstats.qual.noise; + wstats.updated = IW_QUAL_QUAL_UPDATED + | IW_QUAL_LEVEL_UPDATED + | IW_QUAL_NOISE_UPDATED; /* Update spy records */ wireless_spy_update(ai->dev, sa, &wstats); } @@ -3679,7 +3689,7 @@ static u16 setup_card(struct airo_info *ai, u8 *mac, int lock) status = PC4500_readrid(ai,RID_RSSI,&rssi_rid,sizeof(rssi_rid),lock); if ( status == SUCCESS ) { if (ai->rssi || (ai->rssi = kmalloc(512, GFP_KERNEL)) != NULL) - memcpy(ai->rssi, (u8*)&rssi_rid + 2, 512); + memcpy(ai->rssi, (u8*)&rssi_rid + 2, 512); /* Skip RID length member */ } else { if (ai->rssi) { @@ -5348,7 +5358,7 @@ static int proc_BSSList_open( struct inode *inode, struct file *file ) { (int)BSSList_rid.bssid[5], (int)BSSList_rid.ssidLen, BSSList_rid.ssid, - (int)BSSList_rid.rssi); + (int)BSSList_rid.dBm); ptr += sprintf(ptr, " channel = %d %s %s %s %s\n", (int)BSSList_rid.dsChannel, BSSList_rid.cap & CAP_ESS ? "ESS" : "", @@ -5593,6 +5603,29 @@ static void __exit airo_cleanup_module( void ) * would not work at all... - Jean II */ +static u8 airo_rssi_to_dbm (tdsRssiEntry *rssi_rid, u8 rssi) +{ + if( !rssi_rid ) + return 0; + + return (0x100 - rssi_rid[rssi].rssidBm); +} + +static u8 airo_dbm_to_pct (tdsRssiEntry *rssi_rid, u8 dbm) +{ + int i; + + if( !rssi_rid ) + return 0; + + for( i = 0; i < 256; i++ ) + if (rssi_rid[i].rssidBm == dbm) + return rssi_rid[i].rssipct; + + return 0; +} + + static int airo_get_quality (StatusRid *status_rid, CapabilityRid *cap_rid) { int quality = 0; @@ -6443,11 +6476,29 @@ static int airo_get_range(struct net_device *dev, } range->num_frequency = k; + range->sensitivity = 65535; + /* Hum... Should put the right values there */ - range->max_qual.qual = airo_get_max_quality(&cap_rid); - range->max_qual.level = 0x100 - 120; /* -120 dBm */ + if (local->rssi) + range->max_qual.qual = 100; /* % */ + else + range->max_qual.qual = airo_get_max_quality(&cap_rid); + range->max_qual.level = 0; /* 0 means we use dBm */ range->max_qual.noise = 0; - range->sensitivity = 65535; + range->max_qual.updated = 0; + + /* Experimental measurements - boundary 11/5.5 Mb/s */ + /* Note : with or without the (local->rssi), results + * are somewhat different. - Jean II */ + if (local->rssi) { + range->avg_qual.qual = 50; /* % */ + range->avg_qual.level = 186; /* -70 dBm */ + } else { + range->avg_qual.qual = airo_get_avg_quality(&cap_rid); + range->avg_qual.level = 176; /* -80 dBm */ + } + range->avg_qual.noise = 0; + range->avg_qual.updated = 0; for(i = 0 ; i < 8 ; i++) { range->bitrate[i] = cap_rid.supportedRates[i] * 500000; @@ -6508,15 +6559,6 @@ static int airo_get_range(struct net_device *dev, range->max_retry = 65535; range->min_r_time = 1024; range->max_r_time = 65535 * 1024; - /* Experimental measurements - boundary 11/5.5 Mb/s */ - /* Note : with or without the (local->rssi), results - * are somewhat different. - Jean II */ - range->avg_qual.qual = airo_get_avg_quality(&cap_rid); - if (local->rssi) - range->avg_qual.level = 186; /* -70 dBm */ - else - range->avg_qual.level = 176; /* -80 dBm */ - range->avg_qual.noise = 0; /* Event capability (kernel + driver) */ range->event_capa[0] = (IW_EVENT_CAPA_K_0 | @@ -6676,12 +6718,18 @@ static int airo_get_aplist(struct net_device *dev, loseSync = 0; memcpy(address[i].sa_data, BSSList.bssid, ETH_ALEN); address[i].sa_family = ARPHRD_ETHER; - if (local->rssi) - qual[i].level = 0x100 - local->rssi[BSSList.rssi].rssidBm; - else - qual[i].level = (BSSList.rssi + 321) / 2; - qual[i].qual = qual[i].noise = 0; - qual[i].updated = 2; + if (local->rssi) { + qual[i].level = 0x100 - BSSList.dBm; + qual[i].qual = airo_dbm_to_pct( local->rssi, BSSList.dBm ); + qual[i].updated = IW_QUAL_QUAL_UPDATED; + } else { + qual[i].level = (BSSList.dBm + 321) / 2; + qual[i].qual = 0; + qual[i].updated = IW_QUAL_QUAL_INVALID; + } + qual[i].noise = local->wstats.qual.noise; + qual[i].updated = IW_QUAL_LEVEL_UPDATED + | IW_QUAL_NOISE_UPDATED; if (BSSList.index == 0xffff) break; } @@ -6760,7 +6808,7 @@ static int airo_set_scan(struct net_device *dev, static inline char *airo_translate_scan(struct net_device *dev, char *current_ev, char *end_buf, - BSSListRid *list) + BSSListRid *bss) { struct airo_info *ai = dev->priv; struct iw_event iwe; /* Temporary buffer */ @@ -6771,22 +6819,22 @@ static inline char *airo_translate_scan(struct net_device *dev, /* First entry *MUST* be the AP MAC address */ iwe.cmd = SIOCGIWAP; iwe.u.ap_addr.sa_family = ARPHRD_ETHER; - memcpy(iwe.u.ap_addr.sa_data, list->bssid, ETH_ALEN); + memcpy(iwe.u.ap_addr.sa_data, bss->bssid, ETH_ALEN); current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_ADDR_LEN); /* Other entries will be displayed in the order we give them */ /* Add the ESSID */ - iwe.u.data.length = list->ssidLen; + iwe.u.data.length = bss->ssidLen; if(iwe.u.data.length > 32) iwe.u.data.length = 32; iwe.cmd = SIOCGIWESSID; iwe.u.data.flags = 1; - current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, list->ssid); + current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, bss->ssid); /* Add mode */ iwe.cmd = SIOCGIWMODE; - capabilities = le16_to_cpu(list->cap); + capabilities = le16_to_cpu(bss->cap); if(capabilities & (CAP_ESS | CAP_IBSS)) { if(capabilities & CAP_ESS) iwe.u.mode = IW_MODE_MASTER; @@ -6797,19 +6845,25 @@ static inline char *airo_translate_scan(struct net_device *dev, /* Add frequency */ iwe.cmd = SIOCGIWFREQ; - iwe.u.freq.m = le16_to_cpu(list->dsChannel); + iwe.u.freq.m = le16_to_cpu(bss->dsChannel); iwe.u.freq.m = frequency_list[iwe.u.freq.m] * 100000; iwe.u.freq.e = 1; current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_FREQ_LEN); /* Add quality statistics */ iwe.cmd = IWEVQUAL; - if (ai->rssi) - iwe.u.qual.level = 0x100 - ai->rssi[list->rssi].rssidBm; - else - iwe.u.qual.level = (list->rssi + 321) / 2; - iwe.u.qual.noise = 0; - iwe.u.qual.qual = 0; + if (ai->rssi) { + iwe.u.qual.level = 0x100 - bss->dBm; + iwe.u.qual.qual = airo_dbm_to_pct( ai->rssi, bss->dBm ); + iwe.u.qual.updated = IW_QUAL_QUAL_UPDATED; + } else { + iwe.u.qual.level = (bss->dBm + 321) / 2; + iwe.u.qual.qual = 0; + iwe.u.qual.updated = IW_QUAL_QUAL_INVALID; + } + iwe.u.qual.noise = ai->wstats.qual.noise; + iwe.u.qual.updated = IW_QUAL_LEVEL_UPDATED + | IW_QUAL_NOISE_UPDATED; current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_QUAL_LEN); /* Add encryption capability */ @@ -6819,7 +6873,7 @@ static inline char *airo_translate_scan(struct net_device *dev, else iwe.u.data.flags = IW_ENCODE_DISABLED; iwe.u.data.length = 0; - current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, list->ssid); + current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, bss->ssid); /* Rate : stuffing multiple values in a single event require a bit * more of magic - Jean II */ @@ -6831,10 +6885,10 @@ static inline char *airo_translate_scan(struct net_device *dev, /* Max 8 values */ for(i = 0 ; i < 8 ; i++) { /* NULL terminated */ - if(list->rates[i] == 0) + if(bss->rates[i] == 0) break; /* Bit rate given in 500 kb/s units (+ 0x80) */ - iwe.u.bitrate.value = ((list->rates[i] & 0x7f) * 500000); + iwe.u.bitrate.value = ((bss->rates[i] & 0x7f) * 500000); /* Add new value to event */ current_val = iwe_stream_add_value(current_ev, current_val, end_buf, &iwe, IW_EV_PARAM_LEN); } @@ -7153,18 +7207,22 @@ static void airo_read_wireless_stats(struct airo_info *local) /* The status */ local->wstats.status = status_rid.mode; - /* Signal quality and co. But where is the noise level ??? */ - local->wstats.qual.qual = airo_get_quality(&status_rid, &cap_rid); - if (local->rssi) - local->wstats.qual.level = 0x100 - local->rssi[status_rid.sigQuality].rssidBm; - else + /* Signal quality and co */ + if (local->rssi) { + local->wstats.qual.level = airo_rssi_to_dbm( local->rssi, status_rid.sigQuality ); + /* normalizedSignalStrength appears to be a percentage */ + local->wstats.qual.qual = status_rid.normalizedSignalStrength; + } else { local->wstats.qual.level = (status_rid.normalizedSignalStrength + 321) / 2; + local->wstats.qual.qual = airo_get_quality(&status_rid, &cap_rid); + } + local->wstats.qual.updated = IW_QUAL_QUAL_UPDATED | IW_QUAL_LEVEL_UPDATED; if (status_rid.len >= 124) { - local->wstats.qual.noise = 256 - status_rid.noisedBm; - local->wstats.qual.updated = 7; + local->wstats.qual.noise = 0x100 - status_rid.noisedBm; + local->wstats.qual.updated |= IW_QUAL_NOISE_UPDATED; } else { local->wstats.qual.noise = 0; - local->wstats.qual.updated = 3; + local->wstats.qual.updated |= IW_QUAL_NOISE_INVALID; } /* Packets discarded in the wireless adapter due to wireless -- cgit v1.2.3 From 1bcd315362e215a72b56d1330bbf32f1c74eefb5 Mon Sep 17 00:00:00 2001 From: Don Fry Date: Fri, 29 Apr 2005 14:51:17 -0700 Subject: [PATCH] pcnet32: fix resource leak with loopback test When running the loopback test, resources are not properly released on completion. This patch frees all transmit resources after running the loopback test. Tested on ia32 and ppc64 hardware. Signed-off-by: Don Fry --- drivers/net/pcnet32.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index 17947e6c879..13f11487696 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -22,8 +22,8 @@ *************************************************************************/ #define DRV_NAME "pcnet32" -#define DRV_VERSION "1.30i" -#define DRV_RELDATE "06.28.2004" +#define DRV_VERSION "1.30j" +#define DRV_RELDATE "29.04.2005" #define PFX DRV_NAME ": " static const char *version = @@ -256,6 +256,7 @@ static int homepna[MAX_UNITS]; * homepna for selecting HomePNA mode for PCNet/Home 79C978. * v1.30h 24 Jun 2004 Don Fry correctly select auto, speed, duplex in bcr32. * v1.30i 28 Jun 2004 Don Fry change to use module_param. + * v1.30j 29 Apr 2005 Don Fry fix skb/map leak with loopback test. */ @@ -395,6 +396,7 @@ static void pcnet32_led_blink_callback(struct net_device *dev); static int pcnet32_get_regs_len(struct net_device *dev); static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *ptr); +static void pcnet32_purge_tx_ring(struct net_device *dev); enum pci_flags_bit { PCI_USES_IO=1, PCI_USES_MEM=2, PCI_USES_MASTER=4, @@ -785,6 +787,7 @@ static int pcnet32_loopback_test(struct net_device *dev, uint64_t *data1) } clean_up: + pcnet32_purge_tx_ring(dev); x = a->read_csr(ioaddr, 15) & 0xFFFF; a->write_csr(ioaddr, 15, (x & ~0x0044)); /* reset bits 6 and 2 */ -- cgit v1.2.3 From 6da0f685935e13458a2206ac872d0d3c67a52f65 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Sat, 30 Apr 2005 13:52:49 +0200 Subject: [PATCH] SIS900 must select MII This patch fixes the following compile error caused by bk-netdev: <-- snip --> ... LD .tmp_vmlinux1 drivers/built-in.o(.text+0x98528): In function `sis900_get_settings': : undefined reference to `mii_ethtool_gset' drivers/built-in.o(.text+0x98538): In function `sis900_set_settings': : undefined reference to `mii_ethtool_sset' drivers/built-in.o(.text+0x98517): In function `sis900_get_link': : undefined reference to `mii_link_ok' drivers/built-in.o(.text+0x98547): In function `sis900_nway_reset': : undefined reference to `mii_nway_restart' make: *** [.tmp_vmlinux1] Error 1 <-- snip --> Signed-off-by: Adrian Bunk Signed-off-by: Daniele Venzano --- drivers/net/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 3a0a55b62aa..7c5c1acd147 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1555,6 +1555,7 @@ config SIS900 tristate "SiS 900/7016 PCI Fast Ethernet Adapter support" depends on NET_PCI && PCI select CRC32 + select MII ---help--- This is a driver for the Fast Ethernet PCI network cards based on the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in -- cgit v1.2.3 From 15efa9bb2d4da7cd9feb1c67fcf3d9e0e1bd00c6 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 4 May 2005 15:33:11 -0700 Subject: [PATCH] tlan: restore deleted module parameters. The module parameter values got lost in the conversion to the new module_param interface. This should fix it. Signed-off-by: Stephen Hemminger Index: tlan/drivers/net/tlan.c =================================================================== --- drivers/net/tlan.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c index a7ffa64502d..f0851c42409 100644 --- a/drivers/net/tlan.c +++ b/drivers/net/tlan.c @@ -193,6 +193,12 @@ static int aui[MAX_TLAN_BOARDS]; static int duplex[MAX_TLAN_BOARDS]; static int speed[MAX_TLAN_BOARDS]; static int boards_found; +module_param_array(aui, int, NULL, 0); +module_param_array(duplex, int, NULL, 0); +module_param_array(speed, int, NULL, 0); +MODULE_PARM_DESC(aui, "ThunderLAN use AUI port(s) (0-1)"); +MODULE_PARM_DESC(duplex, "ThunderLAN duplex setting(s) (0-default, 1-half, 2-full)"); +MODULE_PARM_DESC(speed, "ThunderLAN port speen setting(s) (0,10,100)"); MODULE_AUTHOR("Maintainer: Samuel Chessman "); MODULE_DESCRIPTION("Driver for TI ThunderLAN based ethernet PCI adapters"); @@ -204,8 +210,13 @@ MODULE_LICENSE("GPL"); /* Turn on debugging. See Documentation/networking/tlan.txt for details */ static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "ThunderLAN debug mask"); static int bbuf; +module_param(bbuf, int, 0); +MODULE_PARM_DESC(bbuf, "ThunderLAN use big buffer (0-1)"); + static u8 *TLanPadBuffer; static dma_addr_t TLanPadBufferDMA; static char TLanSignature[] = "TLAN"; -- cgit v1.2.3 From a1365275e745bb0a173c918a52bcdfa6ce122f7e Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 5 May 2005 15:14:15 -0700 Subject: [PATCH] DM9000 network driver This patch adds support for the davicom dm9000 network driver. The dm9000 is found on some embedded arm boards such as the pimx1 or the scb9328. Signed-off-by: Sascha Hauer Signed-off-by: Ben Dooks Signed-off-by: Andrew Morton diff -puN /dev/null drivers/net/dm9000.c --- drivers/net/Kconfig | 12 + drivers/net/Makefile | 1 + drivers/net/dm9000.c | 1219 ++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/net/dm9000.h | 135 ++++++ 4 files changed, 1367 insertions(+) create mode 100644 drivers/net/dm9000.c create mode 100644 drivers/net/dm9000.h (limited to 'drivers/net') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 3a0a55b62aa..4d0c1fb15c7 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -824,6 +824,18 @@ config SMC9194 . The module will be called smc9194. +config DM9000 + tristate "DM9000 support" + depends on ARM && NET_ETHERNET + select CRC32 + select MII + ---help--- + Support for DM9000 chipset. + + To compile this driver as a module, choose M here and read + . The module will be + called dm9000. + config NET_VENDOR_RACAL bool "Racal-Interlan (Micom) NI cards" depends on NET_ETHERNET && ISA diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 6202b10dbb4..cbd11688608 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -179,6 +179,7 @@ obj-$(CONFIG_AMD8111_ETH) += amd8111e.o obj-$(CONFIG_IBMVETH) += ibmveth.o obj-$(CONFIG_S2IO) += s2io.o obj-$(CONFIG_SMC91X) += smc91x.o +obj-$(CONFIG_DM9000) += dm9000.o obj-$(CONFIG_FEC_8XX) += fec_8xx/ obj-$(CONFIG_ARM) += arm/ diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c new file mode 100644 index 00000000000..f4ba0ffb863 --- /dev/null +++ b/drivers/net/dm9000.c @@ -0,0 +1,1219 @@ +/* + * dm9000.c: Version 1.2 03/18/2003 + * + * A Davicom DM9000 ISA NIC fast Ethernet driver for Linux. + * Copyright (C) 1997 Sten Wang + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * (C)Copyright 1997-1998 DAVICOM Semiconductor,Inc. All Rights Reserved. + * + * V0.11 06/20/2001 REG_0A bit3=1, default enable BP with DA match + * 06/22/2001 Support DM9801 progrmming + * E3: R25 = ((R24 + NF) & 0x00ff) | 0xf000 + * E4: R25 = ((R24 + NF) & 0x00ff) | 0xc200 + * R17 = (R17 & 0xfff0) | NF + 3 + * E5: R25 = ((R24 + NF - 3) & 0x00ff) | 0xc200 + * R17 = (R17 & 0xfff0) | NF + * + * v1.00 modify by simon 2001.9.5 + * change for kernel 2.4.x + * + * v1.1 11/09/2001 fix force mode bug + * + * v1.2 03/18/2003 Weilun Huang : + * Fixed phy reset. + * Added tx/rx 32 bit mode. + * Cleaned up for kernel merge. + * + * 03/03/2004 Sascha Hauer + * Port to 2.6 kernel + * + * 24-Sep-2004 Ben Dooks + * Cleanup of code to remove ifdefs + * Allowed platform device data to influence access width + * Reformatting areas of code + * + * 17-Mar-2005 Sascha Hauer + * * removed 2.4 style module parameters + * * removed removed unused stat counter and fixed + * net_device_stats + * * introduced tx_timeout function + * * reworked locking + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "dm9000.h" + +/* Board/System/Debug information/definition ---------------- */ + +#define DM9000_PHY 0x40 /* PHY address 0x01 */ + +#define TRUE 1 +#define FALSE 0 + +#define CARDNAME "dm9000" +#define PFX CARDNAME ": " + +#define DM9000_TIMER_WUT jiffies+(HZ*2) /* timer wakeup time : 2 second */ + +#define DM9000_DEBUG 0 + +#if DM9000_DEBUG > 2 +#define PRINTK3(args...) printk(CARDNAME ": " args) +#else +#define PRINTK3(args...) do { } while(0) +#endif + +#if DM9000_DEBUG > 1 +#define PRINTK2(args...) printk(CARDNAME ": " args) +#else +#define PRINTK2(args...) do { } while(0) +#endif + +#if DM9000_DEBUG > 0 +#define PRINTK1(args...) printk(CARDNAME ": " args) +#define PRINTK(args...) printk(CARDNAME ": " args) +#else +#define PRINTK1(args...) do { } while(0) +#define PRINTK(args...) printk(KERN_DEBUG args) +#endif + +/* + * Transmit timeout, default 5 seconds. + */ +static int watchdog = 5000; +module_param(watchdog, int, 0400); +MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds"); + +/* Structure/enum declaration ------------------------------- */ +typedef struct board_info { + + void __iomem *io_addr; /* Register I/O base address */ + void __iomem *io_data; /* Data I/O address */ + u16 irq; /* IRQ */ + + u16 tx_pkt_cnt; + u16 queue_pkt_len; + u16 queue_start_addr; + u16 dbug_cnt; + u8 io_mode; /* 0:word, 2:byte */ + u8 phy_addr; + + void (*inblk)(void __iomem *port, void *data, int length); + void (*outblk)(void __iomem *port, void *data, int length); + void (*dumpblk)(void __iomem *port, int length); + + struct resource *addr_res; /* resources found */ + struct resource *data_res; + struct resource *addr_req; /* resources requested */ + struct resource *data_req; + struct resource *irq_res; + + struct timer_list timer; + struct net_device_stats stats; + unsigned char srom[128]; + spinlock_t lock; + + struct mii_if_info mii; + u32 msg_enable; +} board_info_t; + +/* function declaration ------------------------------------- */ +static int dm9000_probe(struct device *); +static int dm9000_open(struct net_device *); +static int dm9000_start_xmit(struct sk_buff *, struct net_device *); +static int dm9000_stop(struct net_device *); +static int dm9000_do_ioctl(struct net_device *, struct ifreq *, int); + + +static void dm9000_timer(unsigned long); +static void dm9000_init_dm9000(struct net_device *); + +static struct net_device_stats *dm9000_get_stats(struct net_device *); + +static irqreturn_t dm9000_interrupt(int, void *, struct pt_regs *); + +static int dm9000_phy_read(struct net_device *dev, int phyaddr_unsused, int reg); +static void dm9000_phy_write(struct net_device *dev, int phyaddr_unused, int reg, + int value); +static u16 read_srom_word(board_info_t *, int); +static void dm9000_rx(struct net_device *); +static void dm9000_hash_table(struct net_device *); + +//#define DM9000_PROGRAM_EEPROM +#ifdef DM9000_PROGRAM_EEPROM +static void program_eeprom(board_info_t * db); +#endif +/* DM9000 network board routine ---------------------------- */ + +static void +dm9000_reset(board_info_t * db) +{ + PRINTK1("dm9000x: resetting\n"); + /* RESET device */ + writeb(DM9000_NCR, db->io_addr); + udelay(200); + writeb(NCR_RST, db->io_data); + udelay(200); +} + +/* + * Read a byte from I/O port + */ +static u8 +ior(board_info_t * db, int reg) +{ + writeb(reg, db->io_addr); + return readb(db->io_data); +} + +/* + * Write a byte to I/O port + */ + +static void +iow(board_info_t * db, int reg, int value) +{ + writeb(reg, db->io_addr); + writeb(value, db->io_data); +} + +/* routines for sending block to chip */ + +static void dm9000_outblk_8bit(void __iomem *reg, void *data, int count) +{ + writesb(reg, data, count); +} + +static void dm9000_outblk_16bit(void __iomem *reg, void *data, int count) +{ + writesw(reg, data, (count+1) >> 1); +} + +static void dm9000_outblk_32bit(void __iomem *reg, void *data, int count) +{ + writesl(reg, data, (count+3) >> 2); +} + +/* input block from chip to memory */ + +static void dm9000_inblk_8bit(void __iomem *reg, void *data, int count) +{ + readsb(reg, data, count+1); +} + + +static void dm9000_inblk_16bit(void __iomem *reg, void *data, int count) +{ + readsw(reg, data, (count+1) >> 1); +} + +static void dm9000_inblk_32bit(void __iomem *reg, void *data, int count) +{ + readsl(reg, data, (count+3) >> 2); +} + +/* dump block from chip to null */ + +static void dm9000_dumpblk_8bit(void __iomem *reg, int count) +{ + int i; + int tmp; + + for (i = 0; i < count; i++) + tmp = readb(reg); +} + +static void dm9000_dumpblk_16bit(void __iomem *reg, int count) +{ + int i; + int tmp; + + count = (count + 1) >> 1; + + for (i = 0; i < count; i++) + tmp = readw(reg); +} + +static void dm9000_dumpblk_32bit(void __iomem *reg, int count) +{ + int i; + int tmp; + + count = (count + 3) >> 2; + + for (i = 0; i < count; i++) + tmp = readl(reg); +} + +/* dm9000_set_io + * + * select the specified set of io routines to use with the + * device + */ + +static void dm9000_set_io(struct board_info *db, int byte_width) +{ + /* use the size of the data resource to work out what IO + * routines we want to use + */ + + switch (byte_width) { + case 1: + db->dumpblk = dm9000_dumpblk_8bit; + db->outblk = dm9000_outblk_8bit; + db->inblk = dm9000_inblk_8bit; + break; + + case 2: + db->dumpblk = dm9000_dumpblk_16bit; + db->outblk = dm9000_outblk_16bit; + db->inblk = dm9000_inblk_16bit; + break; + + case 3: + printk(KERN_ERR PFX ": 3 byte IO, falling back to 16bit\n"); + db->dumpblk = dm9000_dumpblk_16bit; + db->outblk = dm9000_outblk_16bit; + db->inblk = dm9000_inblk_16bit; + break; + + case 4: + default: + db->dumpblk = dm9000_dumpblk_32bit; + db->outblk = dm9000_outblk_32bit; + db->inblk = dm9000_inblk_32bit; + break; + } +} + + +/* Our watchdog timed out. Called by the networking layer */ +static void dm9000_timeout(struct net_device *dev) +{ + board_info_t *db = (board_info_t *) dev->priv; + u8 reg_save; + unsigned long flags; + + /* Save previous register address */ + reg_save = readb(db->io_addr); + spin_lock_irqsave(db->lock,flags); + + netif_stop_queue(dev); + dm9000_reset(db); + dm9000_init_dm9000(dev); + /* We can accept TX packets again */ + dev->trans_start = jiffies; + netif_wake_queue(dev); + + /* Restore previous register address */ + writeb(reg_save, db->io_addr); + spin_unlock_irqrestore(db->lock,flags); +} + + +/* dm9000_release_board + * + * release a board, and any mapped resources + */ + +static void +dm9000_release_board(struct platform_device *pdev, struct board_info *db) +{ + if (db->data_res == NULL) { + if (db->addr_res != NULL) + release_mem_region((unsigned long)db->io_addr, 4); + return; + } + + /* unmap our resources */ + + iounmap(db->io_addr); + iounmap(db->io_data); + + /* release the resources */ + + if (db->data_req != NULL) { + release_resource(db->data_req); + kfree(db->data_req); + } + + if (db->addr_res != NULL) { + release_resource(db->data_req); + kfree(db->addr_req); + } +} + +#define res_size(_r) (((_r)->end - (_r)->start) + 1) + +/* + * Search DM9000 board, allocate space and register it + */ +static int +dm9000_probe(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct dm9000_plat_data *pdata = pdev->dev.platform_data; + struct board_info *db; /* Point a board information structure */ + struct net_device *ndev; + unsigned long base; + int ret = 0; + int iosize; + int i; + u32 id_val; + + printk(KERN_INFO "%s Ethernet Driver\n", CARDNAME); + + /* Init network device */ + ndev = alloc_etherdev(sizeof (struct board_info)); + if (!ndev) { + printk("%s: could not allocate device.\n", CARDNAME); + return -ENOMEM; + } + + SET_MODULE_OWNER(ndev); + SET_NETDEV_DEV(ndev, dev); + + PRINTK2("dm9000_probe()"); + + /* setup board info structure */ + db = (struct board_info *) ndev->priv; + memset(db, 0, sizeof (*db)); + + if (pdev->num_resources < 2) { + ret = -ENODEV; + goto out; + } + + switch (pdev->num_resources) { + case 2: + base = pdev->resource[0].start; + + if (!request_mem_region(base, 4, ndev->name)) { + ret = -EBUSY; + goto out; + } + + ndev->base_addr = base; + ndev->irq = pdev->resource[1].start; + db->io_addr = (void *)base; + db->io_data = (void *)(base + 4); + + break; + + case 3: + db->addr_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + db->data_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + db->irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + + if (db->addr_res == NULL || db->data_res == NULL) { + printk(KERN_ERR PFX "insufficient resources\n"); + ret = -ENOENT; + goto out; + } + + i = res_size(db->addr_res); + db->addr_req = request_mem_region(db->addr_res->start, i, + pdev->name); + + if (db->addr_req == NULL) { + printk(KERN_ERR PFX "cannot claim address reg area\n"); + ret = -EIO; + goto out; + } + + db->io_addr = ioremap(db->addr_res->start, i); + + if (db->io_addr == NULL) { + printk(KERN_ERR "failed to ioremap address reg\n"); + ret = -EINVAL; + goto out; + } + + iosize = res_size(db->data_res); + db->data_req = request_mem_region(db->data_res->start, iosize, + pdev->name); + + if (db->data_req == NULL) { + printk(KERN_ERR PFX "cannot claim data reg area\n"); + ret = -EIO; + goto out; + } + + db->io_data = ioremap(db->data_res->start, iosize); + + if (db->io_data == NULL) { + printk(KERN_ERR "failed to ioremap data reg\n"); + ret = -EINVAL; + goto out; + } + + /* fill in parameters for net-dev structure */ + + ndev->base_addr = (unsigned long)db->io_addr; + ndev->irq = db->irq_res->start; + + /* ensure at least we have a default set of IO routines */ + dm9000_set_io(db, iosize); + + } + + /* check to see if anything is being over-ridden */ + if (pdata != NULL) { + /* check to see if the driver wants to over-ride the + * default IO width */ + + if (pdata->flags & DM9000_PLATF_8BITONLY) + dm9000_set_io(db, 1); + + if (pdata->flags & DM9000_PLATF_16BITONLY) + dm9000_set_io(db, 2); + + if (pdata->flags & DM9000_PLATF_32BITONLY) + dm9000_set_io(db, 4); + + /* check to see if there are any IO routine + * over-rides */ + + if (pdata->inblk != NULL) + db->inblk = pdata->inblk; + + if (pdata->outblk != NULL) + db->outblk = pdata->outblk; + + if (pdata->dumpblk != NULL) + db->dumpblk = pdata->dumpblk; + } + + dm9000_reset(db); + + /* try two times, DM9000 sometimes gets the first read wrong */ + for (i = 0; i < 2; i++) { + id_val = ior(db, DM9000_VIDL); + id_val |= (u32)ior(db, DM9000_VIDH) << 8; + id_val |= (u32)ior(db, DM9000_PIDL) << 16; + id_val |= (u32)ior(db, DM9000_PIDH) << 24; + + if (id_val == DM9000_ID) + break; + printk("%s: read wrong id 0x%08x\n", CARDNAME, id_val); + } + + if (id_val != DM9000_ID) { + printk("%s: wrong id: 0x%08x\n", CARDNAME, id_val); + goto release; + } + + /* from this point we assume that we have found a DM9000 */ + + /* driver system function */ + ether_setup(ndev); + + ndev->open = &dm9000_open; + ndev->hard_start_xmit = &dm9000_start_xmit; + ndev->tx_timeout = &dm9000_timeout; + ndev->watchdog_timeo = msecs_to_jiffies(watchdog); + ndev->stop = &dm9000_stop; + ndev->get_stats = &dm9000_get_stats; + ndev->set_multicast_list = &dm9000_hash_table; + ndev->do_ioctl = &dm9000_do_ioctl; + +#ifdef DM9000_PROGRAM_EEPROM + program_eeprom(db); +#endif + db->msg_enable = NETIF_MSG_LINK; + db->mii.phy_id_mask = 0x1f; + db->mii.reg_num_mask = 0x1f; + db->mii.force_media = 0; + db->mii.full_duplex = 0; + db->mii.dev = ndev; + db->mii.mdio_read = dm9000_phy_read; + db->mii.mdio_write = dm9000_phy_write; + + /* Read SROM content */ + for (i = 0; i < 64; i++) + ((u16 *) db->srom)[i] = read_srom_word(db, i); + + /* Set Node Address */ + for (i = 0; i < 6; i++) + ndev->dev_addr[i] = db->srom[i]; + + if (!is_valid_ether_addr(ndev->dev_addr)) + printk("%s: Invalid ethernet MAC address. Please " + "set using ifconfig\n", ndev->name); + + dev_set_drvdata(dev, ndev); + ret = register_netdev(ndev); + + if (ret == 0) { + printk("%s: dm9000 at %p,%p IRQ %d MAC: ", + ndev->name, db->io_addr, db->io_data, ndev->irq); + for (i = 0; i < 5; i++) + printk("%02x:", ndev->dev_addr[i]); + printk("%02x\n", ndev->dev_addr[5]); + } + return 0; + + release: + out: + printk("%s: not found (%d).\n", CARDNAME, ret); + + dm9000_release_board(pdev, db); + kfree(ndev); + + return ret; +} + +/* + * Open the interface. + * The interface is opened whenever "ifconfig" actives it. + */ +static int +dm9000_open(struct net_device *dev) +{ + board_info_t *db = (board_info_t *) dev->priv; + + PRINTK2("entering dm9000_open\n"); + + if (request_irq(dev->irq, &dm9000_interrupt, SA_SHIRQ, dev->name, dev)) + return -EAGAIN; + + /* Initialize DM9000 board */ + dm9000_reset(db); + dm9000_init_dm9000(dev); + + /* Init driver variable */ + db->dbug_cnt = 0; + + /* set and active a timer process */ + init_timer(&db->timer); + db->timer.expires = DM9000_TIMER_WUT * 2; + db->timer.data = (unsigned long) dev; + db->timer.function = &dm9000_timer; + add_timer(&db->timer); + + mii_check_media(&db->mii, netif_msg_link(db), 1); + netif_start_queue(dev); + + return 0; +} + +/* + * Initilize dm9000 board + */ +static void +dm9000_init_dm9000(struct net_device *dev) +{ + board_info_t *db = (board_info_t *) dev->priv; + + PRINTK1("entering %s\n",__FUNCTION__); + + /* I/O mode */ + db->io_mode = ior(db, DM9000_ISR) >> 6; /* ISR bit7:6 keeps I/O mode */ + + /* GPIO0 on pre-activate PHY */ + iow(db, DM9000_GPR, 0); /* REG_1F bit0 activate phyxcer */ + iow(db, DM9000_GPCR, GPCR_GEP_CNTL); /* Let GPIO0 output */ + iow(db, DM9000_GPR, 0); /* Enable PHY */ + + /* Program operating register */ + iow(db, DM9000_TCR, 0); /* TX Polling clear */ + iow(db, DM9000_BPTR, 0x3f); /* Less 3Kb, 200us */ + iow(db, DM9000_FCR, 0xff); /* Flow Control */ + iow(db, DM9000_SMCR, 0); /* Special Mode */ + /* clear TX status */ + iow(db, DM9000_NSR, NSR_WAKEST | NSR_TX2END | NSR_TX1END); + iow(db, DM9000_ISR, ISR_CLR_STATUS); /* Clear interrupt status */ + + /* Set address filter table */ + dm9000_hash_table(dev); + + /* Activate DM9000 */ + iow(db, DM9000_RCR, RCR_DIS_LONG | RCR_DIS_CRC | RCR_RXEN); + /* Enable TX/RX interrupt mask */ + iow(db, DM9000_IMR, IMR_PAR | IMR_PTM | IMR_PRM); + + /* Init Driver variable */ + db->tx_pkt_cnt = 0; + db->queue_pkt_len = 0; + dev->trans_start = 0; + spin_lock_init(&db->lock); +} + +/* + * Hardware start transmission. + * Send a packet to media from the upper layer. + */ +static int +dm9000_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + board_info_t *db = (board_info_t *) dev->priv; + + PRINTK3("dm9000_start_xmit\n"); + + if (db->tx_pkt_cnt > 1) + return 1; + + netif_stop_queue(dev); + + /* Disable all interrupts */ + iow(db, DM9000_IMR, IMR_PAR); + + /* Move data to DM9000 TX RAM */ + writeb(DM9000_MWCMD, db->io_addr); + + (db->outblk)(db->io_data, skb->data, skb->len); + db->stats.tx_bytes += skb->len; + + /* TX control: First packet immediately send, second packet queue */ + if (db->tx_pkt_cnt == 0) { + + /* First Packet */ + db->tx_pkt_cnt++; + + /* Set TX length to DM9000 */ + iow(db, DM9000_TXPLL, skb->len & 0xff); + iow(db, DM9000_TXPLH, (skb->len >> 8) & 0xff); + + /* Issue TX polling command */ + iow(db, DM9000_TCR, TCR_TXREQ); /* Cleared after TX complete */ + + dev->trans_start = jiffies; /* save the time stamp */ + + } else { + /* Second packet */ + db->tx_pkt_cnt++; + db->queue_pkt_len = skb->len; + } + + /* free this SKB */ + dev_kfree_skb(skb); + + /* Re-enable resource check */ + if (db->tx_pkt_cnt == 1) + netif_wake_queue(dev); + + /* Re-enable interrupt */ + iow(db, DM9000_IMR, IMR_PAR | IMR_PTM | IMR_PRM); + + return 0; +} + +static void +dm9000_shutdown(struct net_device *dev) +{ + board_info_t *db = (board_info_t *) dev->priv; + + /* RESET device */ + dm9000_phy_write(dev, 0, MII_BMCR, BMCR_RESET); /* PHY RESET */ + iow(db, DM9000_GPR, 0x01); /* Power-Down PHY */ + iow(db, DM9000_IMR, IMR_PAR); /* Disable all interrupt */ + iow(db, DM9000_RCR, 0x00); /* Disable RX */ +} + +/* + * Stop the interface. + * The interface is stopped when it is brought. + */ +static int +dm9000_stop(struct net_device *ndev) +{ + board_info_t *db = (board_info_t *) ndev->priv; + + PRINTK1("entering %s\n",__FUNCTION__); + + /* deleted timer */ + del_timer(&db->timer); + + netif_stop_queue(ndev); + netif_carrier_off(ndev); + + /* free interrupt */ + free_irq(ndev->irq, ndev); + + dm9000_shutdown(ndev); + + return 0; +} + +/* + * DM9000 interrupt handler + * receive the packet to upper layer, free the transmitted packet + */ + +void +dm9000_tx_done(struct net_device *dev, board_info_t * db) +{ + int tx_status = ior(db, DM9000_NSR); /* Got TX status */ + + if (tx_status & (NSR_TX2END | NSR_TX1END)) { + /* One packet sent complete */ + db->tx_pkt_cnt--; + db->stats.tx_packets++; + + /* Queue packet check & send */ + if (db->tx_pkt_cnt > 0) { + iow(db, DM9000_TXPLL, db->queue_pkt_len & 0xff); + iow(db, DM9000_TXPLH, (db->queue_pkt_len >> 8) & 0xff); + iow(db, DM9000_TCR, TCR_TXREQ); + dev->trans_start = jiffies; + } + netif_wake_queue(dev); + } +} + +static irqreturn_t +dm9000_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = dev_id; + board_info_t *db; + int int_status; + u8 reg_save; + + PRINTK3("entering %s\n",__FUNCTION__); + + if (!dev) { + PRINTK1("dm9000_interrupt() without DEVICE arg\n"); + return IRQ_HANDLED; + } + + /* A real interrupt coming */ + db = (board_info_t *) dev->priv; + spin_lock(&db->lock); + + /* Save previous register address */ + reg_save = readb(db->io_addr); + + /* Disable all interrupts */ + iow(db, DM9000_IMR, IMR_PAR); + + /* Got DM9000 interrupt status */ + int_status = ior(db, DM9000_ISR); /* Got ISR */ + iow(db, DM9000_ISR, int_status); /* Clear ISR status */ + + /* Received the coming packet */ + if (int_status & ISR_PRS) + dm9000_rx(dev); + + /* Trnasmit Interrupt check */ + if (int_status & ISR_PTS) + dm9000_tx_done(dev, db); + + /* Re-enable interrupt mask */ + iow(db, DM9000_IMR, IMR_PAR | IMR_PTM | IMR_PRM); + + /* Restore previous register address */ + writeb(reg_save, db->io_addr); + + spin_unlock(&db->lock); + + return IRQ_HANDLED; +} + +/* + * Get statistics from driver. + */ +static struct net_device_stats * +dm9000_get_stats(struct net_device *dev) +{ + board_info_t *db = (board_info_t *) dev->priv; + return &db->stats; +} + +/* + * Process the upper socket ioctl command + */ +static int +dm9000_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + PRINTK1("entering %s\n",__FUNCTION__); + return 0; +} + +/* + * A periodic timer routine + * Dynamic media sense, allocated Rx buffer... + */ +static void +dm9000_timer(unsigned long data) +{ + struct net_device *dev = (struct net_device *) data; + board_info_t *db = (board_info_t *) dev->priv; + u8 reg_save; + unsigned long flags; + + PRINTK3("dm9000_timer()\n"); + + spin_lock_irqsave(db->lock,flags); + /* Save previous register address */ + reg_save = readb(db->io_addr); + + mii_check_media(&db->mii, netif_msg_link(db), 0); + + /* Restore previous register address */ + writeb(reg_save, db->io_addr); + spin_unlock_irqrestore(db->lock,flags); + + /* Set timer again */ + db->timer.expires = DM9000_TIMER_WUT; + add_timer(&db->timer); +} + +struct dm9000_rxhdr { + u16 RxStatus; + u16 RxLen; +} __attribute__((__packed__)); + +/* + * Received a packet and pass to upper layer + */ +static void +dm9000_rx(struct net_device *dev) +{ + board_info_t *db = (board_info_t *) dev->priv; + struct dm9000_rxhdr rxhdr; + struct sk_buff *skb; + u8 rxbyte, *rdptr; + int GoodPacket; + int RxLen; + + /* Check packet ready or not */ + do { + ior(db, DM9000_MRCMDX); /* Dummy read */ + + /* Get most updated data */ + rxbyte = readb(db->io_data); + + /* Status check: this byte must be 0 or 1 */ + if (rxbyte > DM9000_PKT_RDY) { + printk("status check failed: %d\n", rxbyte); + iow(db, DM9000_RCR, 0x00); /* Stop Device */ + iow(db, DM9000_ISR, IMR_PAR); /* Stop INT request */ + return; + } + + if (rxbyte != DM9000_PKT_RDY) + return; + + /* A packet ready now & Get status/length */ + GoodPacket = TRUE; + writeb(DM9000_MRCMD, db->io_addr); + + (db->inblk)(db->io_data, &rxhdr, sizeof(rxhdr)); + + RxLen = rxhdr.RxLen; + + /* Packet Status check */ + if (RxLen < 0x40) { + GoodPacket = FALSE; + PRINTK1("Bad Packet received (runt)\n"); + } + + if (RxLen > DM9000_PKT_MAX) { + PRINTK1("RST: RX Len:%x\n", RxLen); + } + + if (rxhdr.RxStatus & 0xbf00) { + GoodPacket = FALSE; + if (rxhdr.RxStatus & 0x100) { + PRINTK1("fifo error\n"); + db->stats.rx_fifo_errors++; + } + if (rxhdr.RxStatus & 0x200) { + PRINTK1("crc error\n"); + db->stats.rx_crc_errors++; + } + if (rxhdr.RxStatus & 0x8000) { + PRINTK1("length error\n"); + db->stats.rx_length_errors++; + } + } + + /* Move data from DM9000 */ + if (GoodPacket + && ((skb = dev_alloc_skb(RxLen + 4)) != NULL)) { + skb->dev = dev; + skb_reserve(skb, 2); + rdptr = (u8 *) skb_put(skb, RxLen - 4); + + /* Read received packet from RX SRAM */ + + (db->inblk)(db->io_data, rdptr, RxLen); + db->stats.rx_bytes += RxLen; + + /* Pass to upper layer */ + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + db->stats.rx_packets++; + + } else { + /* need to dump the packet's data */ + + (db->dumpblk)(db->io_data, RxLen); + } + } while (rxbyte == DM9000_PKT_RDY); +} + +/* + * Read a word data from SROM + */ +static u16 +read_srom_word(board_info_t * db, int offset) +{ + iow(db, DM9000_EPAR, offset); + iow(db, DM9000_EPCR, EPCR_ERPRR); + mdelay(8); /* according to the datasheet 200us should be enough, + but it doesn't work */ + iow(db, DM9000_EPCR, 0x0); + return (ior(db, DM9000_EPDRL) + (ior(db, DM9000_EPDRH) << 8)); +} + +#ifdef DM9000_PROGRAM_EEPROM +/* + * Write a word data to SROM + */ +static void +write_srom_word(board_info_t * db, int offset, u16 val) +{ + iow(db, DM9000_EPAR, offset); + iow(db, DM9000_EPDRH, ((val >> 8) & 0xff)); + iow(db, DM9000_EPDRL, (val & 0xff)); + iow(db, DM9000_EPCR, EPCR_WEP | EPCR_ERPRW); + mdelay(8); /* same shit */ + iow(db, DM9000_EPCR, 0); +} + +/* + * Only for development: + * Here we write static data to the eeprom in case + * we don't have valid content on a new board + */ +static void +program_eeprom(board_info_t * db) +{ + u16 eeprom[] = { 0x0c00, 0x007f, 0x1300, /* MAC Address */ + 0x0000, /* Autoload: accept nothing */ + 0x0a46, 0x9000, /* Vendor / Product ID */ + 0x0000, /* pin control */ + 0x0000, + }; /* Wake-up mode control */ + int i; + for (i = 0; i < 8; i++) + write_srom_word(db, i, eeprom[i]); +} +#endif + + +/* + * Calculate the CRC valude of the Rx packet + * flag = 1 : return the reverse CRC (for the received packet CRC) + * 0 : return the normal CRC (for Hash Table index) + */ + +static unsigned long +cal_CRC(unsigned char *Data, unsigned int Len, u8 flag) +{ + + u32 crc = ether_crc_le(Len, Data); + + if (flag) + return ~crc; + + return crc; +} + +/* + * Set DM9000 multicast address + */ +static void +dm9000_hash_table(struct net_device *dev) +{ + board_info_t *db = (board_info_t *) dev->priv; + struct dev_mc_list *mcptr = dev->mc_list; + int mc_cnt = dev->mc_count; + u32 hash_val; + u16 i, oft, hash_table[4]; + unsigned long flags; + + PRINTK2("dm9000_hash_table()\n"); + + spin_lock_irqsave(&db->lock,flags); + + for (i = 0, oft = 0x10; i < 6; i++, oft++) + iow(db, oft, dev->dev_addr[i]); + + /* Clear Hash Table */ + for (i = 0; i < 4; i++) + hash_table[i] = 0x0; + + /* broadcast address */ + hash_table[3] = 0x8000; + + /* the multicast address in Hash Table : 64 bits */ + for (i = 0; i < mc_cnt; i++, mcptr = mcptr->next) { + hash_val = cal_CRC((char *) mcptr->dmi_addr, 6, 0) & 0x3f; + hash_table[hash_val / 16] |= (u16) 1 << (hash_val % 16); + } + + /* Write the hash table to MAC MD table */ + for (i = 0, oft = 0x16; i < 4; i++) { + iow(db, oft++, hash_table[i] & 0xff); + iow(db, oft++, (hash_table[i] >> 8) & 0xff); + } + + spin_unlock_irqrestore(&db->lock,flags); +} + + +/* + * Read a word from phyxcer + */ +static int +dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg) +{ + board_info_t *db = (board_info_t *) dev->priv; + unsigned long flags; + int ret; + + spin_lock_irqsave(&db->lock,flags); + /* Fill the phyxcer register into REG_0C */ + iow(db, DM9000_EPAR, DM9000_PHY | reg); + + iow(db, DM9000_EPCR, 0xc); /* Issue phyxcer read command */ + udelay(100); /* Wait read complete */ + iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer read command */ + + /* The read data keeps on REG_0D & REG_0E */ + ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL); + + spin_unlock_irqrestore(&db->lock,flags); + + return ret; +} + +/* + * Write a word to phyxcer + */ +static void +dm9000_phy_write(struct net_device *dev, int phyaddr_unused, int reg, int value) +{ + board_info_t *db = (board_info_t *) dev->priv; + unsigned long flags; + + spin_lock_irqsave(&db->lock,flags); + + /* Fill the phyxcer register into REG_0C */ + iow(db, DM9000_EPAR, DM9000_PHY | reg); + + /* Fill the written data into REG_0D & REG_0E */ + iow(db, DM9000_EPDRL, (value & 0xff)); + iow(db, DM9000_EPDRH, ((value >> 8) & 0xff)); + + iow(db, DM9000_EPCR, 0xa); /* Issue phyxcer write command */ + udelay(500); /* Wait write complete */ + iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer write command */ + + spin_unlock_irqrestore(&db->lock,flags); +} + +static int +dm9000_drv_suspend(struct device *dev, u32 state, u32 level) +{ + struct net_device *ndev = dev_get_drvdata(dev); + + if (ndev && level == SUSPEND_DISABLE) { + if (netif_running(ndev)) { + netif_device_detach(ndev); + dm9000_shutdown(ndev); + } + } + return 0; +} + +static int +dm9000_drv_resume(struct device *dev, u32 level) +{ + struct net_device *ndev = dev_get_drvdata(dev); + board_info_t *db = (board_info_t *) ndev->priv; + + if (ndev && level == RESUME_ENABLE) { + + if (netif_running(ndev)) { + dm9000_reset(db); + dm9000_init_dm9000(ndev); + + netif_device_attach(ndev); + } + } + return 0; +} + +static int +dm9000_drv_remove(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct net_device *ndev = dev_get_drvdata(dev); + + dev_set_drvdata(dev, NULL); + + unregister_netdev(ndev); + dm9000_release_board(pdev, (board_info_t *) ndev->priv); + kfree(ndev); /* free device structure */ + + PRINTK1("clean_module() exit\n"); + + return 0; +} + +static struct device_driver dm9000_driver = { + .name = "dm9000", + .bus = &platform_bus_type, + .probe = dm9000_probe, + .remove = dm9000_drv_remove, + .suspend = dm9000_drv_suspend, + .resume = dm9000_drv_resume, +}; + +static int __init +dm9000_init(void) +{ + return driver_register(&dm9000_driver); /* search board and register */ +} + +static void __exit +dm9000_cleanup(void) +{ + driver_unregister(&dm9000_driver); +} + +module_init(dm9000_init); +module_exit(dm9000_cleanup); + +MODULE_AUTHOR("Sascha Hauer, Ben Dooks"); +MODULE_DESCRIPTION("Davicom DM9000 network driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/dm9000.h b/drivers/net/dm9000.h new file mode 100644 index 00000000000..82cad360baf --- /dev/null +++ b/drivers/net/dm9000.h @@ -0,0 +1,135 @@ +/* + * dm9000 Ethernet + */ + +#ifndef _DM9000X_H_ +#define _DM9000X_H_ + +#define DM9000_ID 0x90000A46 + +/* although the registers are 16 bit, they are 32-bit aligned. + */ + +#define DM9000_NCR 0x00 +#define DM9000_NSR 0x01 +#define DM9000_TCR 0x02 +#define DM9000_TSR1 0x03 +#define DM9000_TSR2 0x04 +#define DM9000_RCR 0x05 +#define DM9000_RSR 0x06 +#define DM9000_ROCR 0x07 +#define DM9000_BPTR 0x08 +#define DM9000_FCTR 0x09 +#define DM9000_FCR 0x0A +#define DM9000_EPCR 0x0B +#define DM9000_EPAR 0x0C +#define DM9000_EPDRL 0x0D +#define DM9000_EPDRH 0x0E +#define DM9000_WCR 0x0F + +#define DM9000_PAR 0x10 +#define DM9000_MAR 0x16 + +#define DM9000_GPCR 0x1e +#define DM9000_GPR 0x1f +#define DM9000_TRPAL 0x22 +#define DM9000_TRPAH 0x23 +#define DM9000_RWPAL 0x24 +#define DM9000_RWPAH 0x25 + +#define DM9000_VIDL 0x28 +#define DM9000_VIDH 0x29 +#define DM9000_PIDL 0x2A +#define DM9000_PIDH 0x2B + +#define DM9000_CHIPR 0x2C +#define DM9000_SMCR 0x2F + +#define DM9000_MRCMDX 0xF0 +#define DM9000_MRCMD 0xF2 +#define DM9000_MRRL 0xF4 +#define DM9000_MRRH 0xF5 +#define DM9000_MWCMDX 0xF6 +#define DM9000_MWCMD 0xF8 +#define DM9000_MWRL 0xFA +#define DM9000_MWRH 0xFB +#define DM9000_TXPLL 0xFC +#define DM9000_TXPLH 0xFD +#define DM9000_ISR 0xFE +#define DM9000_IMR 0xFF + +#define NCR_EXT_PHY (1<<7) +#define NCR_WAKEEN (1<<6) +#define NCR_FCOL (1<<4) +#define NCR_FDX (1<<3) +#define NCR_LBK (3<<1) +#define NCR_RST (1<<0) + +#define NSR_SPEED (1<<7) +#define NSR_LINKST (1<<6) +#define NSR_WAKEST (1<<5) +#define NSR_TX2END (1<<3) +#define NSR_TX1END (1<<2) +#define NSR_RXOV (1<<1) + +#define TCR_TJDIS (1<<6) +#define TCR_EXCECM (1<<5) +#define TCR_PAD_DIS2 (1<<4) +#define TCR_CRC_DIS2 (1<<3) +#define TCR_PAD_DIS1 (1<<2) +#define TCR_CRC_DIS1 (1<<1) +#define TCR_TXREQ (1<<0) + +#define TSR_TJTO (1<<7) +#define TSR_LC (1<<6) +#define TSR_NC (1<<5) +#define TSR_LCOL (1<<4) +#define TSR_COL (1<<3) +#define TSR_EC (1<<2) + +#define RCR_WTDIS (1<<6) +#define RCR_DIS_LONG (1<<5) +#define RCR_DIS_CRC (1<<4) +#define RCR_ALL (1<<3) +#define RCR_RUNT (1<<2) +#define RCR_PRMSC (1<<1) +#define RCR_RXEN (1<<0) + +#define RSR_RF (1<<7) +#define RSR_MF (1<<6) +#define RSR_LCS (1<<5) +#define RSR_RWTO (1<<4) +#define RSR_PLE (1<<3) +#define RSR_AE (1<<2) +#define RSR_CE (1<<1) +#define RSR_FOE (1<<0) + +#define FCTR_HWOT(ot) (( ot & 0xf ) << 4 ) +#define FCTR_LWOT(ot) ( ot & 0xf ) + +#define IMR_PAR (1<<7) +#define IMR_ROOM (1<<3) +#define IMR_ROM (1<<2) +#define IMR_PTM (1<<1) +#define IMR_PRM (1<<0) + +#define ISR_ROOS (1<<3) +#define ISR_ROS (1<<2) +#define ISR_PTS (1<<1) +#define ISR_PRS (1<<0) +#define ISR_CLR_STATUS (ISR_ROOS | ISR_ROS | ISR_PTS | ISR_PRS) + +#define EPCR_REEP (1<<5) +#define EPCR_WEP (1<<4) +#define EPCR_EPOS (1<<3) +#define EPCR_ERPRR (1<<2) +#define EPCR_ERPRW (1<<1) +#define EPCR_ERRE (1<<0) + +#define GPCR_GEP_CNTL (1<<0) + +#define DM9000_PKT_RDY 0x01 /* Packet ready to receive */ +#define DM9000_PKT_MAX 1536 /* Received packet max size */ + +#endif /* _DM9000X_H_ */ + -- cgit v1.2.3 From 4075400b8b2b279df1c2be38edb95ace7f75d772 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 3 Apr 2005 09:15:52 +0100 Subject: [PATCH] skge missing include Signed-off-by: Al Viro --- drivers/net/skge.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 11e158346ac..48503e7963b 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -36,6 +36,7 @@ #include #include #include +#include #include #include "skge.h" -- cgit v1.2.3 From 0b2d7fea1c3893c3790e0b89c310ec1321f1b8c0 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 3 Apr 2005 09:15:52 +0100 Subject: [PATCH] skge 64bit portability ptrdiff_t is %td, not %d Signed-off-by: Al Viro --- drivers/net/skge.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 48503e7963b..30e8d589d16 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -2376,7 +2376,7 @@ static int skge_xmit_frame(struct sk_buff *skb, struct net_device *dev) skge_write8(hw, Q_ADDR(txqaddr[skge->port], Q_CSR), CSR_START); if (netif_msg_tx_queued(skge)) - printk(KERN_DEBUG "%s: tx queued, slot %d, len %d\n", + printk(KERN_DEBUG "%s: tx queued, slot %td, len %d\n", dev->name, e - ring->start, skb->len); ring->to_use = e->next; @@ -2607,7 +2607,7 @@ static int skge_poll(struct net_device *dev, int *budget) } if (netif_msg_rx_status(skge)) - printk(KERN_DEBUG PFX "%s: rx slot %d status 0x%x len %d\n", + printk(KERN_DEBUG PFX "%s: rx slot %td status 0x%x len %d\n", dev->name, e - ring->start, rd->status, len); skb_put(skb, len); @@ -2667,7 +2667,7 @@ static inline void skge_tx_intr(struct net_device *dev) break; if (unlikely(netif_msg_tx_done(skge))) - printk(KERN_DEBUG PFX "%s: tx done slot %d status 0x%x\n", + printk(KERN_DEBUG PFX "%s: tx done slot %td status 0x%x\n", dev->name, e - ring->start, td->status); skge_tx_free(hw, e); -- cgit v1.2.3 From 507ef165e8bc078e877db293a5e3048e692491fb Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 3 Apr 2005 09:15:52 +0100 Subject: [PATCH] etherh iomem annotations the usual echo Signed-off-by: Al Viro --- drivers/net/arm/etherh.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/arm/etherh.c b/drivers/net/arm/etherh.c index 942a2819576..2e28c201dcc 100644 --- a/drivers/net/arm/etherh.c +++ b/drivers/net/arm/etherh.c @@ -68,6 +68,7 @@ struct etherh_priv { void __iomem *dma_base; unsigned int id; void __iomem *ctrl_port; + void __iomem *base; unsigned char ctrl; u32 supported; }; @@ -177,7 +178,7 @@ etherh_setif(struct net_device *dev) switch (etherh_priv(dev)->id) { case PROD_I3_ETHERLAN600: case PROD_I3_ETHERLAN600A: - addr = (void *)dev->base_addr + EN0_RCNTHI; + addr = etherh_priv(dev)->base + EN0_RCNTHI; switch (dev->if_port) { case IF_PORT_10BASE2: @@ -218,7 +219,7 @@ etherh_getifstat(struct net_device *dev) switch (etherh_priv(dev)->id) { case PROD_I3_ETHERLAN600: case PROD_I3_ETHERLAN600A: - addr = (void *)dev->base_addr + EN0_RCNTHI; + addr = etherh_priv(dev)->base + EN0_RCNTHI; switch (dev->if_port) { case IF_PORT_10BASE2: stat = 1; @@ -281,7 +282,7 @@ static void etherh_reset(struct net_device *dev) { struct ei_device *ei_local = netdev_priv(dev); - void __iomem *addr = (void *)dev->base_addr; + void __iomem *addr = etherh_priv(dev)->base; writeb(E8390_NODMA+E8390_PAGE0+E8390_STOP, addr); @@ -327,7 +328,7 @@ etherh_block_output (struct net_device *dev, int count, const unsigned char *buf ei_local->dmaing = 1; - addr = (void *)dev->base_addr; + addr = etherh_priv(dev)->base; dma_base = etherh_priv(dev)->dma_base; count = (count + 1) & ~1; @@ -387,7 +388,7 @@ etherh_block_input (struct net_device *dev, int count, struct sk_buff *skb, int ei_local->dmaing = 1; - addr = (void *)dev->base_addr; + addr = etherh_priv(dev)->base; dma_base = etherh_priv(dev)->dma_base; buf = skb->data; @@ -427,7 +428,7 @@ etherh_get_header (struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_p ei_local->dmaing = 1; - addr = (void *)dev->base_addr; + addr = etherh_priv(dev)->base; dma_base = etherh_priv(dev)->dma_base; writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD); @@ -696,7 +697,8 @@ etherh_probe(struct expansion_card *ec, const struct ecard_id *id) eh->ctrl_port = eh->ioc_fast; } - dev->base_addr = (unsigned long)eh->memc + data->ns8390_offset; + eh->base = eh->memc + data->ns8390_offset; + dev->base_addr = (unsigned long)eh->base; eh->dma_base = eh->memc + data->dataport_offset; eh->ctrl_port += data->ctrlport_offset; -- cgit v1.2.3 From 99417769bae55d34348320d7a05615e8a891fd3d Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 3 Apr 2005 09:15:52 +0100 Subject: [PATCH] pcnet_cs cleanup killed abuse of ->rmem_end Signed-off-by: Al Viro --- drivers/net/pcmcia/pcnet_cs.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index b0126304ca0..181b6ed5500 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -1537,20 +1537,20 @@ static void shmem_get_8390_hdr(struct net_device *dev, static void shmem_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) { - void __iomem *xfer_start = ei_status.mem + (TX_PAGES<<8) - + ring_offset + void __iomem *base = ei_status.mem; + unsigned long offset = (TX_PAGES<<8) + ring_offset - (ei_status.rx_start_page << 8); char *buf = skb->data; - if (xfer_start + count > (void __iomem *)ei_status.rmem_end) { + if (offset + count > ei_status.priv) { /* We must wrap the input move. */ - int semi_count = (void __iomem *)ei_status.rmem_end - xfer_start; - copyin(buf, xfer_start, semi_count); + int semi_count = ei_status.priv - offset; + copyin(buf, base + offset, semi_count); buf += semi_count; - xfer_start = ei_status.mem + (TX_PAGES<<8); + offset = TX_PAGES<<8; count -= semi_count; } - copyin(buf, xfer_start, count); + copyin(buf, base + offset, count); } /*====================================================================*/ @@ -1611,8 +1611,9 @@ static int setup_shmem_window(dev_link_t *link, int start_pg, } ei_status.mem = info->base + offset; + ei_status.priv = req.Size; dev->mem_start = (u_long)ei_status.mem; - dev->mem_end = ei_status.rmem_end = (u_long)info->base + req.Size; + dev->mem_end = dev->mem_start + req.Size; ei_status.tx_start_page = start_pg; ei_status.rx_start_page = start_pg + TX_PAGES; -- cgit v1.2.3 From f7a3aae1723e7ffc9c4fcdb489365da7a3d81255 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 3 Apr 2005 09:15:52 +0100 Subject: [PATCH] drivers/net/wireless enabled by wrong option NET_WIRELESS is only a subset of the stuff in drivers/net/wireless; NET_RADIO is what covers all of them. Signed-off-by: Al Viro --- drivers/net/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 6202b10dbb4..e038d55e4f6 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -187,7 +187,7 @@ obj-$(CONFIG_TR) += tokenring/ obj-$(CONFIG_WAN) += wan/ obj-$(CONFIG_ARCNET) += arcnet/ obj-$(CONFIG_NET_PCMCIA) += pcmcia/ -obj-$(CONFIG_NET_WIRELESS) += wireless/ +obj-$(CONFIG_NET_RADIO) += wireless/ obj-$(CONFIG_NET_TULIP) += tulip/ obj-$(CONFIG_HAMRADIO) += hamradio/ obj-$(CONFIG_IRDA) += irda/ -- cgit v1.2.3 From b3dd65f958354226275522b5a64157834bdc5415 Mon Sep 17 00:00:00 2001 From: Krzysztof Halasa Date: Thu, 21 Apr 2005 15:57:25 +0200 Subject: [PATCH] Generic HDLC update The attached patch updates generic HDLC to version 1.18. FR Cisco LMI production-tested. Please apply to Linux 2.6. Thanks. Changes: - doc updates - added Cisco LMI support to Frame-Relay code - cleaned hdlc_fr.c a bit, removed some orphaned #defines etc. - fixed a problem with non-functional LMI in FR DCE mode. - changed diagnostic messages to better conform to FR standards - all protocols: information about carrier changes (DCD line) is now printed to kernel logs. Signed-Off-By: Krzysztof Halasa --- drivers/net/wan/hdlc_fr.c | 320 ++++++++++++++++++++++------------------- drivers/net/wan/hdlc_generic.c | 16 ++- 2 files changed, 187 insertions(+), 149 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c index 7f450b51a6c..a5d6891c9d4 100644 --- a/drivers/net/wan/hdlc_fr.c +++ b/drivers/net/wan/hdlc_fr.c @@ -2,7 +2,7 @@ * Generic HDLC support routines for Linux * Frame Relay support * - * Copyright (C) 1999 - 2003 Krzysztof Halasa + * Copyright (C) 1999 - 2005 Krzysztof Halasa * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License @@ -27,6 +27,10 @@ active = open and "link reliable" exist = new = not used + CCITT LMI: ITU-T Q.933 Annex A + ANSI LMI: ANSI T1.617 Annex D + CISCO LMI: the original, aka "Gang of Four" LMI + */ #include @@ -49,45 +53,41 @@ #undef DEBUG_ECN #undef DEBUG_LINK -#define MAXLEN_LMISTAT 20 /* max size of status enquiry frame */ - -#define PVC_STATE_NEW 0x01 -#define PVC_STATE_ACTIVE 0x02 -#define PVC_STATE_FECN 0x08 /* FECN condition */ -#define PVC_STATE_BECN 0x10 /* BECN condition */ - - -#define FR_UI 0x03 -#define FR_PAD 0x00 - -#define NLPID_IP 0xCC -#define NLPID_IPV6 0x8E -#define NLPID_SNAP 0x80 -#define NLPID_PAD 0x00 -#define NLPID_Q933 0x08 - - -#define LMI_DLCI 0 /* LMI DLCI */ -#define LMI_PROTO 0x08 -#define LMI_CALLREF 0x00 /* Call Reference */ -#define LMI_ANSI_LOCKSHIFT 0x95 /* ANSI lockshift */ -#define LMI_REPTYPE 1 /* report type */ -#define LMI_CCITT_REPTYPE 0x51 -#define LMI_ALIVE 3 /* keep alive */ -#define LMI_CCITT_ALIVE 0x53 -#define LMI_PVCSTAT 7 /* pvc status */ -#define LMI_CCITT_PVCSTAT 0x57 -#define LMI_FULLREP 0 /* full report */ -#define LMI_INTEGRITY 1 /* link integrity report */ -#define LMI_SINGLE 2 /* single pvc report */ +#define FR_UI 0x03 +#define FR_PAD 0x00 + +#define NLPID_IP 0xCC +#define NLPID_IPV6 0x8E +#define NLPID_SNAP 0x80 +#define NLPID_PAD 0x00 +#define NLPID_CCITT_ANSI_LMI 0x08 +#define NLPID_CISCO_LMI 0x09 + + +#define LMI_CCITT_ANSI_DLCI 0 /* LMI DLCI */ +#define LMI_CISCO_DLCI 1023 + +#define LMI_CALLREF 0x00 /* Call Reference */ +#define LMI_ANSI_LOCKSHIFT 0x95 /* ANSI locking shift */ +#define LMI_ANSI_CISCO_REPTYPE 0x01 /* report type */ +#define LMI_CCITT_REPTYPE 0x51 +#define LMI_ANSI_CISCO_ALIVE 0x03 /* keep alive */ +#define LMI_CCITT_ALIVE 0x53 +#define LMI_ANSI_CISCO_PVCSTAT 0x07 /* PVC status */ +#define LMI_CCITT_PVCSTAT 0x57 + +#define LMI_FULLREP 0x00 /* full report */ +#define LMI_INTEGRITY 0x01 /* link integrity report */ +#define LMI_SINGLE 0x02 /* single PVC report */ + #define LMI_STATUS_ENQUIRY 0x75 #define LMI_STATUS 0x7D /* reply */ #define LMI_REPT_LEN 1 /* report type element length */ #define LMI_INTEG_LEN 2 /* link integrity element length */ -#define LMI_LENGTH 13 /* standard LMI frame length */ -#define LMI_ANSI_LENGTH 14 +#define LMI_CCITT_CISCO_LENGTH 13 /* LMI frame lengths */ +#define LMI_ANSI_LENGTH 14 typedef struct { @@ -223,51 +223,34 @@ static inline struct net_device** get_dev_p(pvc_device *pvc, int type) } -static inline u16 status_to_dlci(u8 *status, int *active, int *new) -{ - *new = (status[2] & 0x08) ? 1 : 0; - *active = (status[2] & 0x02) ? 1 : 0; - - return ((status[0] & 0x3F) << 4) | ((status[1] & 0x78) >> 3); -} - - -static inline void dlci_to_status(u16 dlci, u8 *status, int active, int new) -{ - status[0] = (dlci >> 4) & 0x3F; - status[1] = ((dlci << 3) & 0x78) | 0x80; - status[2] = 0x80; - - if (new) - status[2] |= 0x08; - else if (active) - status[2] |= 0x02; -} - - - static int fr_hard_header(struct sk_buff **skb_p, u16 dlci) { u16 head_len; struct sk_buff *skb = *skb_p; switch (skb->protocol) { - case __constant_ntohs(ETH_P_IP): + case __constant_ntohs(NLPID_CCITT_ANSI_LMI): head_len = 4; skb_push(skb, head_len); - skb->data[3] = NLPID_IP; + skb->data[3] = NLPID_CCITT_ANSI_LMI; break; - case __constant_ntohs(ETH_P_IPV6): + case __constant_ntohs(NLPID_CISCO_LMI): head_len = 4; skb_push(skb, head_len); - skb->data[3] = NLPID_IPV6; + skb->data[3] = NLPID_CISCO_LMI; break; - case __constant_ntohs(LMI_PROTO): + case __constant_ntohs(ETH_P_IP): + head_len = 4; + skb_push(skb, head_len); + skb->data[3] = NLPID_IP; + break; + + case __constant_ntohs(ETH_P_IPV6): head_len = 4; skb_push(skb, head_len); - skb->data[3] = LMI_PROTO; + skb->data[3] = NLPID_IPV6; break; case __constant_ntohs(ETH_P_802_3): @@ -461,13 +444,14 @@ static void fr_lmi_send(struct net_device *dev, int fullrep) hdlc_device *hdlc = dev_to_hdlc(dev); struct sk_buff *skb; pvc_device *pvc = hdlc->state.fr.first_pvc; - int len = (hdlc->state.fr.settings.lmi == LMI_ANSI) ? LMI_ANSI_LENGTH - : LMI_LENGTH; - int stat_len = 3; + int lmi = hdlc->state.fr.settings.lmi; + int dce = hdlc->state.fr.settings.dce; + int len = lmi == LMI_ANSI ? LMI_ANSI_LENGTH : LMI_CCITT_CISCO_LENGTH; + int stat_len = (lmi == LMI_CISCO) ? 6 : 3; u8 *data; int i = 0; - if (hdlc->state.fr.settings.dce && fullrep) { + if (dce && fullrep) { len += hdlc->state.fr.dce_pvc_count * (2 + stat_len); if (len > HDLC_MAX_MRU) { printk(KERN_WARNING "%s: Too many PVCs while sending " @@ -484,29 +468,31 @@ static void fr_lmi_send(struct net_device *dev, int fullrep) } memset(skb->data, 0, len); skb_reserve(skb, 4); - skb->protocol = __constant_htons(LMI_PROTO); - fr_hard_header(&skb, LMI_DLCI); + if (lmi == LMI_CISCO) { + skb->protocol = __constant_htons(NLPID_CISCO_LMI); + fr_hard_header(&skb, LMI_CISCO_DLCI); + } else { + skb->protocol = __constant_htons(NLPID_CCITT_ANSI_LMI); + fr_hard_header(&skb, LMI_CCITT_ANSI_DLCI); + } data = skb->tail; data[i++] = LMI_CALLREF; - data[i++] = hdlc->state.fr.settings.dce - ? LMI_STATUS : LMI_STATUS_ENQUIRY; - if (hdlc->state.fr.settings.lmi == LMI_ANSI) + data[i++] = dce ? LMI_STATUS : LMI_STATUS_ENQUIRY; + if (lmi == LMI_ANSI) data[i++] = LMI_ANSI_LOCKSHIFT; - data[i++] = (hdlc->state.fr.settings.lmi == LMI_CCITT) - ? LMI_CCITT_REPTYPE : LMI_REPTYPE; + data[i++] = lmi == LMI_CCITT ? LMI_CCITT_REPTYPE : + LMI_ANSI_CISCO_REPTYPE; data[i++] = LMI_REPT_LEN; data[i++] = fullrep ? LMI_FULLREP : LMI_INTEGRITY; - - data[i++] = (hdlc->state.fr.settings.lmi == LMI_CCITT) - ? LMI_CCITT_ALIVE : LMI_ALIVE; + data[i++] = lmi == LMI_CCITT ? LMI_CCITT_ALIVE : LMI_ANSI_CISCO_ALIVE; data[i++] = LMI_INTEG_LEN; data[i++] = hdlc->state.fr.txseq =fr_lmi_nextseq(hdlc->state.fr.txseq); data[i++] = hdlc->state.fr.rxseq; - if (hdlc->state.fr.settings.dce && fullrep) { + if (dce && fullrep) { while (pvc) { - data[i++] = (hdlc->state.fr.settings.lmi == LMI_CCITT) - ? LMI_CCITT_PVCSTAT : LMI_PVCSTAT; + data[i++] = lmi == LMI_CCITT ? LMI_CCITT_PVCSTAT : + LMI_ANSI_CISCO_PVCSTAT; data[i++] = stat_len; /* LMI start/restart */ @@ -523,8 +509,20 @@ static void fr_lmi_send(struct net_device *dev, int fullrep) fr_log_dlci_active(pvc); } - dlci_to_status(pvc->dlci, data + i, - pvc->state.active, pvc->state.new); + if (lmi == LMI_CISCO) { + data[i] = pvc->dlci >> 8; + data[i + 1] = pvc->dlci & 0xFF; + } else { + data[i] = (pvc->dlci >> 4) & 0x3F; + data[i + 1] = ((pvc->dlci << 3) & 0x78) | 0x80; + data[i + 2] = 0x80; + } + + if (pvc->state.new) + data[i + 2] |= 0x08; + else if (pvc->state.active) + data[i + 2] |= 0x02; + i += stat_len; pvc = pvc->next; } @@ -569,6 +567,8 @@ static void fr_set_link_state(int reliable, struct net_device *dev) pvc_carrier(0, pvc); pvc->state.exist = pvc->state.active = 0; pvc->state.new = 0; + if (!hdlc->state.fr.settings.dce) + pvc->state.bandwidth = 0; pvc = pvc->next; } } @@ -583,11 +583,12 @@ static void fr_timer(unsigned long arg) int i, cnt = 0, reliable; u32 list; - if (hdlc->state.fr.settings.dce) + if (hdlc->state.fr.settings.dce) { reliable = hdlc->state.fr.request && time_before(jiffies, hdlc->state.fr.last_poll + hdlc->state.fr.settings.t392 * HZ); - else { + hdlc->state.fr.request = 0; + } else { hdlc->state.fr.last_errors <<= 1; /* Shift the list */ if (hdlc->state.fr.request) { if (hdlc->state.fr.reliable) @@ -634,65 +635,88 @@ static void fr_timer(unsigned long arg) static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb) { hdlc_device *hdlc = dev_to_hdlc(dev); - int stat_len; pvc_device *pvc; - int reptype = -1, error, no_ram; u8 rxseq, txseq; - int i; + int lmi = hdlc->state.fr.settings.lmi; + int dce = hdlc->state.fr.settings.dce; + int stat_len = (lmi == LMI_CISCO) ? 6 : 3, reptype, error, no_ram, i; - if (skb->len < ((hdlc->state.fr.settings.lmi == LMI_ANSI) - ? LMI_ANSI_LENGTH : LMI_LENGTH)) { + if (skb->len < (lmi == LMI_ANSI ? LMI_ANSI_LENGTH : + LMI_CCITT_CISCO_LENGTH)) { printk(KERN_INFO "%s: Short LMI frame\n", dev->name); return 1; } - if (skb->data[5] != (!hdlc->state.fr.settings.dce ? - LMI_STATUS : LMI_STATUS_ENQUIRY)) { - printk(KERN_INFO "%s: LMI msgtype=%x, Not LMI status %s\n", - dev->name, skb->data[2], - hdlc->state.fr.settings.dce ? "enquiry" : "reply"); + if (skb->data[3] != (lmi == LMI_CISCO ? NLPID_CISCO_LMI : + NLPID_CCITT_ANSI_LMI)) { + printk(KERN_INFO "%s: Received non-LMI frame with LMI" + " DLCI\n", dev->name); + return 1; + } + + if (skb->data[4] != LMI_CALLREF) { + printk(KERN_INFO "%s: Invalid LMI Call reference (0x%02X)\n", + dev->name, skb->data[4]); + return 1; + } + + if (skb->data[5] != (dce ? LMI_STATUS_ENQUIRY : LMI_STATUS)) { + printk(KERN_INFO "%s: Invalid LMI Message type (0x%02X)\n", + dev->name, skb->data[5]); return 1; } - i = (hdlc->state.fr.settings.lmi == LMI_ANSI) ? 7 : 6; + if (lmi == LMI_ANSI) { + if (skb->data[6] != LMI_ANSI_LOCKSHIFT) { + printk(KERN_INFO "%s: Not ANSI locking shift in LMI" + " message (0x%02X)\n", dev->name, skb->data[6]); + return 1; + } + i = 7; + } else + i = 6; - if (skb->data[i] != - ((hdlc->state.fr.settings.lmi == LMI_CCITT) - ? LMI_CCITT_REPTYPE : LMI_REPTYPE)) { - printk(KERN_INFO "%s: Not a report type=%x\n", + if (skb->data[i] != (lmi == LMI_CCITT ? LMI_CCITT_REPTYPE : + LMI_ANSI_CISCO_REPTYPE)) { + printk(KERN_INFO "%s: Not an LMI Report type IE (0x%02X)\n", dev->name, skb->data[i]); return 1; } - i++; - i++; /* Skip length field */ + if (skb->data[++i] != LMI_REPT_LEN) { + printk(KERN_INFO "%s: Invalid LMI Report type IE length" + " (%u)\n", dev->name, skb->data[i]); + return 1; + } - reptype = skb->data[i++]; + reptype = skb->data[++i]; + if (reptype != LMI_INTEGRITY && reptype != LMI_FULLREP) { + printk(KERN_INFO "%s: Unsupported LMI Report type (0x%02X)\n", + dev->name, reptype); + return 1; + } - if (skb->data[i]!= - ((hdlc->state.fr.settings.lmi == LMI_CCITT) - ? LMI_CCITT_ALIVE : LMI_ALIVE)) { - printk(KERN_INFO "%s: Unsupported status element=%x\n", - dev->name, skb->data[i]); + if (skb->data[++i] != (lmi == LMI_CCITT ? LMI_CCITT_ALIVE : + LMI_ANSI_CISCO_ALIVE)) { + printk(KERN_INFO "%s: Not an LMI Link integrity verification" + " IE (0x%02X)\n", dev->name, skb->data[i]); return 1; } - i++; - i++; /* Skip length field */ + if (skb->data[++i] != LMI_INTEG_LEN) { + printk(KERN_INFO "%s: Invalid LMI Link integrity verification" + " IE length (%u)\n", dev->name, skb->data[i]); + return 1; + } + i++; hdlc->state.fr.rxseq = skb->data[i++]; /* TX sequence from peer */ rxseq = skb->data[i++]; /* Should confirm our sequence */ txseq = hdlc->state.fr.txseq; - if (hdlc->state.fr.settings.dce) { - if (reptype != LMI_FULLREP && reptype != LMI_INTEGRITY) { - printk(KERN_INFO "%s: Unsupported report type=%x\n", - dev->name, reptype); - return 1; - } + if (dce) hdlc->state.fr.last_poll = jiffies; - } error = 0; if (!hdlc->state.fr.reliable) @@ -703,7 +727,7 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb) error = 1; } - if (hdlc->state.fr.settings.dce) { + if (dce) { if (hdlc->state.fr.fullrep_sent && !error) { /* Stop sending full report - the last one has been confirmed by DTE */ hdlc->state.fr.fullrep_sent = 0; @@ -725,6 +749,7 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb) hdlc->state.fr.dce_changed = 0; } + hdlc->state.fr.request = 1; /* got request */ fr_lmi_send(dev, reptype == LMI_FULLREP ? 1 : 0); return 0; } @@ -739,7 +764,6 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb) if (reptype != LMI_FULLREP) return 0; - stat_len = 3; pvc = hdlc->state.fr.first_pvc; while (pvc) { @@ -750,24 +774,35 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb) no_ram = 0; while (skb->len >= i + 2 + stat_len) { u16 dlci; + u32 bw; unsigned int active, new; - if (skb->data[i] != ((hdlc->state.fr.settings.lmi == LMI_CCITT) - ? LMI_CCITT_PVCSTAT : LMI_PVCSTAT)) { - printk(KERN_WARNING "%s: Invalid PVCSTAT ID: %x\n", - dev->name, skb->data[i]); + if (skb->data[i] != (lmi == LMI_CCITT ? LMI_CCITT_PVCSTAT : + LMI_ANSI_CISCO_PVCSTAT)) { + printk(KERN_INFO "%s: Not an LMI PVC status IE" + " (0x%02X)\n", dev->name, skb->data[i]); return 1; } - i++; - if (skb->data[i] != stat_len) { - printk(KERN_WARNING "%s: Invalid PVCSTAT length: %x\n", - dev->name, skb->data[i]); + if (skb->data[++i] != stat_len) { + printk(KERN_INFO "%s: Invalid LMI PVC status IE length" + " (%u)\n", dev->name, skb->data[i]); return 1; } i++; - dlci = status_to_dlci(skb->data + i, &active, &new); + new = !! (skb->data[i + 2] & 0x08); + active = !! (skb->data[i + 2] & 0x02); + if (lmi == LMI_CISCO) { + dlci = (skb->data[i] << 8) | skb->data[i + 1]; + bw = (skb->data[i + 3] << 16) | + (skb->data[i + 4] << 8) | + (skb->data[i + 5]); + } else { + dlci = ((skb->data[i] & 0x3F) << 4) | + ((skb->data[i + 1] & 0x78) >> 3); + bw = 0; + } pvc = add_pvc(dev, dlci); @@ -783,9 +818,11 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb) pvc->state.deleted = 0; if (active != pvc->state.active || new != pvc->state.new || + bw != pvc->state.bandwidth || !pvc->state.exist) { pvc->state.new = new; pvc->state.active = active; + pvc->state.bandwidth = bw; pvc_carrier(active, pvc); fr_log_dlci_active(pvc); } @@ -801,6 +838,7 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb) pvc_carrier(0, pvc); pvc->state.active = pvc->state.new = 0; pvc->state.exist = 0; + pvc->state.bandwidth = 0; fr_log_dlci_active(pvc); } pvc = pvc->next; @@ -829,22 +867,15 @@ static int fr_rx(struct sk_buff *skb) dlci = q922_to_dlci(skb->data); - if (dlci == LMI_DLCI) { - if (hdlc->state.fr.settings.lmi == LMI_NONE) - goto rx_error; /* LMI packet with no LMI? */ - - if (data[3] == LMI_PROTO) { - if (fr_lmi_recv(ndev, skb)) - goto rx_error; - else { - dev_kfree_skb_any(skb); - return NET_RX_SUCCESS; - } - } - - printk(KERN_INFO "%s: Received non-LMI frame with LMI DLCI\n", - ndev->name); - goto rx_error; + if ((dlci == LMI_CCITT_ANSI_DLCI && + (hdlc->state.fr.settings.lmi == LMI_ANSI || + hdlc->state.fr.settings.lmi == LMI_CCITT)) || + (dlci == LMI_CISCO_DLCI && + hdlc->state.fr.settings.lmi == LMI_CISCO)) { + if (fr_lmi_recv(ndev, skb)) + goto rx_error; + dev_kfree_skb_any(skb); + return NET_RX_SUCCESS; } pvc = find_pvc(hdlc, dlci); @@ -1170,7 +1201,8 @@ int hdlc_fr_ioctl(struct net_device *dev, struct ifreq *ifr) if ((new_settings.lmi != LMI_NONE && new_settings.lmi != LMI_ANSI && - new_settings.lmi != LMI_CCITT) || + new_settings.lmi != LMI_CCITT && + new_settings.lmi != LMI_CISCO) || new_settings.t391 < 1 || new_settings.t392 < 2 || new_settings.n391 < 1 || diff --git a/drivers/net/wan/hdlc_generic.c b/drivers/net/wan/hdlc_generic.c index 6ed064cb446..a63f6a2cc4f 100644 --- a/drivers/net/wan/hdlc_generic.c +++ b/drivers/net/wan/hdlc_generic.c @@ -1,7 +1,7 @@ /* * Generic HDLC support routines for Linux * - * Copyright (C) 1999 - 2003 Krzysztof Halasa + * Copyright (C) 1999 - 2005 Krzysztof Halasa * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License @@ -38,7 +38,7 @@ #include -static const char* version = "HDLC support module revision 1.17"; +static const char* version = "HDLC support module revision 1.18"; #undef DEBUG_LINK @@ -126,10 +126,13 @@ void hdlc_set_carrier(int on, struct net_device *dev) if (!hdlc->open) goto carrier_exit; - if (hdlc->carrier) + if (hdlc->carrier) { + printk(KERN_INFO "%s: Carrier detected\n", dev->name); __hdlc_set_carrier_on(dev); - else + } else { + printk(KERN_INFO "%s: Carrier lost\n", dev->name); __hdlc_set_carrier_off(dev); + } carrier_exit: spin_unlock_irqrestore(&hdlc->state_lock, flags); @@ -157,8 +160,11 @@ int hdlc_open(struct net_device *dev) spin_lock_irq(&hdlc->state_lock); - if (hdlc->carrier) + if (hdlc->carrier) { + printk(KERN_INFO "%s: Carrier detected\n", dev->name); __hdlc_set_carrier_on(dev); + } else + printk(KERN_INFO "%s: No carrier\n", dev->name); hdlc->open = 1; -- cgit v1.2.3 From c16ef1ceedff27c1b452724ca7f89b729651098f Mon Sep 17 00:00:00 2001 From: Benjamin LaHaise Date: Wed, 6 Apr 2005 11:17:59 -0400 Subject: [PATCH] ns83820 update Changes: - improved DAC ifdefs from Andi Kleen - removal of dead code from Adrian Bunk - fix half duplex collision behaviour --- drivers/net/ns83820.c | 69 ++++++++++++++++++++++----------------------------- 1 file changed, 29 insertions(+), 40 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c index 2fcc181a862..c336b46bd33 100644 --- a/drivers/net/ns83820.c +++ b/drivers/net/ns83820.c @@ -1,4 +1,4 @@ -#define _VERSION "0.20" +#define VERSION "0.22" /* ns83820.c by Benjamin LaHaise with contributions. * * Questions/comments/discussion to linux-ns83820@kvack.org. @@ -63,9 +63,11 @@ * - fix missed txok introduced during performance * tuning * 0.20 - fix stupid RFEN thinko. i am such a smurf. - * * 20040828 0.21 - add hardware vlan accleration * by Neil Horman + * 20050406 0.22 - improved DAC ifdefs from Andi Kleen + * - removal of dead code from Adrian Bunk + * - fix half duplex collision behaviour * Driver Overview * =============== * @@ -129,18 +131,6 @@ static int lnksts = 0; /* CFG_LNKSTS bit polarity */ #undef Dprintk #define Dprintk dprintk -#if defined(CONFIG_HIGHMEM64G) || defined(__ia64__) -#define USE_64BIT_ADDR "+" -#endif - -#if defined(USE_64BIT_ADDR) -#define VERSION _VERSION USE_64BIT_ADDR -#define TRY_DAC 1 -#else -#define VERSION _VERSION -#define TRY_DAC 0 -#endif - /* tunables */ #define RX_BUF_SIZE 1500 /* 8192 */ #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) @@ -386,22 +376,16 @@ static int lnksts = 0; /* CFG_LNKSTS bit polarity */ #define LINK_DOWN 0x02 #define LINK_UP 0x04 -#ifdef USE_64BIT_ADDR -#define HW_ADDR_LEN 8 +#define HW_ADDR_LEN sizeof(dma_addr_t) #define desc_addr_set(desc, addr) \ do { \ - u64 __addr = (addr); \ - (desc)[0] = cpu_to_le32(__addr); \ - (desc)[1] = cpu_to_le32(__addr >> 32); \ + ((desc)[0] = cpu_to_le32(addr)); \ + if (HW_ADDR_LEN == 8) \ + (desc)[1] = cpu_to_le32(((u64)addr) >> 32); \ } while(0) #define desc_addr_get(desc) \ - (((u64)le32_to_cpu((desc)[1]) << 32) \ - | le32_to_cpu((desc)[0])) -#else -#define HW_ADDR_LEN 4 -#define desc_addr_set(desc, addr) ((desc)[0] = cpu_to_le32(addr)) -#define desc_addr_get(desc) (le32_to_cpu((desc)[0])) -#endif + (le32_to_cpu((desc)[0]) | \ + (HW_ADDR_LEN == 8 ? ((dma_addr_t)le32_to_cpu((desc)[1]))<<32 : 0)) #define DESC_LINK 0 #define DESC_BUFPTR (DESC_LINK + HW_ADDR_LEN/4) @@ -727,11 +711,23 @@ static void fastcall phy_intr(struct net_device *ndev) speed = ((cfg / CFG_SPDSTS0) & 3); fullduplex = (cfg & CFG_DUPSTS); - if (fullduplex) + if (fullduplex) { new_cfg |= CFG_SB; + writel(readl(dev->base + TXCFG) + | TXCFG_CSI | TXCFG_HBI, + dev->base + TXCFG); + writel(readl(dev->base + RXCFG) | RXCFG_RX_FD, + dev->base + RXCFG); + } else { + writel(readl(dev->base + TXCFG) + & ~(TXCFG_CSI | TXCFG_HBI), + dev->base + TXCFG); + writel(readl(dev->base + RXCFG) & ~(RXCFG_RX_FD), + dev->base + RXCFG); + } if ((cfg & CFG_LNKSTS) && - ((new_cfg ^ dev->CFG_cache) & CFG_MODE_1000)) { + ((new_cfg ^ dev->CFG_cache) != 0)) { writel(new_cfg, dev->base + CFG); dev->CFG_cache = new_cfg; } @@ -1189,7 +1185,6 @@ again: for (;;) { volatile u32 *desc = dev->tx_descs + (free_idx * DESC_SIZE); - u32 residue = 0; dprintk("frag[%3u]: %4u @ 0x%08Lx\n", free_idx, len, (unsigned long long)buf); @@ -1199,17 +1194,11 @@ again: desc_addr_set(desc + DESC_BUFPTR, buf); desc[DESC_EXTSTS] = cpu_to_le32(extsts); - cmdsts = ((nr_frags|residue) ? CMDSTS_MORE : do_intr ? CMDSTS_INTR : 0); + cmdsts = ((nr_frags) ? CMDSTS_MORE : do_intr ? CMDSTS_INTR : 0); cmdsts |= (desc == first_desc) ? 0 : CMDSTS_OWN; cmdsts |= len; desc[DESC_CMDSTS] = cpu_to_le32(cmdsts); - if (residue) { - buf += len; - len = residue; - continue; - } - if (!nr_frags) break; @@ -1841,7 +1830,8 @@ static int __devinit ns83820_init_one(struct pci_dev *pci_dev, const struct pci_ int using_dac = 0; /* See if we can set the dma mask early on; failure is fatal. */ - if (TRY_DAC && !pci_set_dma_mask(pci_dev, 0xffffffffffffffffULL)) { + if (sizeof(dma_addr_t) == 8 && + !pci_set_dma_mask(pci_dev, 0xffffffffffffffffULL)) { using_dac = 1; } else if (!pci_set_dma_mask(pci_dev, 0xffffffff)) { using_dac = 0; @@ -1972,9 +1962,8 @@ static int __devinit ns83820_init_one(struct pci_dev *pci_dev, const struct pci_ /* When compiled with 64 bit addressing, we must always enable * the 64 bit descriptor format. */ -#ifdef USE_64BIT_ADDR - dev->CFG_cache |= CFG_M64ADDR; -#endif + if (sizeof(dma_addr_t) == 8) + dev->CFG_cache |= CFG_M64ADDR; if (using_dac) dev->CFG_cache |= CFG_T64ADDR; -- cgit v1.2.3 From 99718699f5746cc365f3a9ab4769568a1da97635 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 14 Apr 2005 11:20:32 -0700 Subject: [PATCH] {PATCH] Fix IBM EMAC driver ioctl bug Fix IBM EMAC driver ioctl bug. I found IBM EMAC driver bug. So mii-tool command print wrong status. # mii-tool eth0: 10 Mbit, half duplex, no link eth1: 10 Mbit, half duplex, no link I can get correct status on fixed kernel. # mii-tool eth0: negotiated 100baseTx-FD, link okZZ eth1: negotiated 100baseTx-FD, link ok Hiroaki Fuse Signed-off-by: Geoff Levand for CELF --- drivers/net/ibm_emac/ibm_emac_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c index ab44358ddbf..6482d994d48 100644 --- a/drivers/net/ibm_emac/ibm_emac_core.c +++ b/drivers/net/ibm_emac/ibm_emac_core.c @@ -1595,7 +1595,7 @@ static struct ethtool_ops emac_ethtool_ops = { static int emac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) { struct ocp_enet_private *fep = dev->priv; - uint *data = (uint *) & rq->ifr_ifru; + uint16_t *data = (uint16_t *) & rq->ifr_ifru; switch (cmd) { case SIOCGMIIPHY: -- cgit v1.2.3 From 562faf469f35bf63c0b021550811280c81bdc52e Mon Sep 17 00:00:00 2001 From: James Harper Date: Thu, 5 May 2005 15:14:18 -0700 Subject: [PATCH] fix PROMISC/bridging in TLAN driver This has been a problem for me for ages. When using bridging, the driver is switched into promiscuous mode before the link init is complete. The init complete routine then resets the promisc bit on the card so the kernel still thinks the card is in promiscuous mode but the card isn't. doh. I think this bug only shows up in bridging when the bridge is started at boot time (or something else that sets promisc at the same time the card was started). If promisc is enabled later it works. Here's a trivial (and hopefully correct) patch that works for me. It just calls the promisc/multicast setup routine after init. Cc: Jeff Garzik Signed-off-by: Andrew Morton --- drivers/net/tlan.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c index f0851c42409..9680a308c62 100644 --- a/drivers/net/tlan.c +++ b/drivers/net/tlan.c @@ -2392,6 +2392,7 @@ TLan_FinishReset( struct net_device *dev ) TLan_SetTimer( dev, (10*HZ), TLAN_TIMER_FINISH_RESET ); return; } + TLan_SetMulticastList(dev); } /* TLan_FinishReset */ -- cgit v1.2.3 From c4cc26d3310a6614a20e32276228a5d44159fc9b Mon Sep 17 00:00:00 2001 From: Jiri Benc Date: Wed, 27 Apr 2005 12:48:56 +0200 Subject: [PATCH] Typo in tulip driver This patch fixes a typo in tulip driver in 2.6.12-rc3. --- drivers/net/tulip/tulip_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c index d098b3ba353..e0ae3ed6e57 100644 --- a/drivers/net/tulip/tulip_core.c +++ b/drivers/net/tulip/tulip_core.c @@ -1104,7 +1104,7 @@ static void set_rx_mode(struct net_device *dev) if (entry != 0) { /* Avoid a chip errata by prefixing a dummy entry. Don't do this on the ULI526X as it triggers a different problem */ - if (!(tp->chip_id == ULI526X && (tp->revision = 0x40 || tp->revision == 0x50))) { + if (!(tp->chip_id == ULI526X && (tp->revision == 0x40 || tp->revision == 0x50))) { tp->tx_buffers[entry].skb = NULL; tp->tx_buffers[entry].mapping = 0; tp->tx_ring[entry].length = -- cgit v1.2.3 From c8920ba041c8934b29370f5d62ab9ea8f147966b Mon Sep 17 00:00:00 2001 From: Daniel Andersen Date: Thu, 5 May 2005 15:14:09 -0700 Subject: [PATCH] wireless: 3CRWE154G72 Kconfig help fix Version 2 of the 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 is not supported by the prism54 project. To stop confusion, the kernel documentation should state so as 3com made a good job hiding the version. Signed-off-by: Andrew Morton diff -puN drivers/net/wireless/Kconfig~wireless-3crwe154g72-kconfig-help-fix drivers/net/wireless/Kconfig --- drivers/net/wireless/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 0aaa12c0c09..1d3231cc471 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -323,7 +323,7 @@ config PRISM54 For a complete list of supported cards visit . Here is the latest confirmed list of supported cards: - 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 + 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 (version 1) Allnet ALL0271 PCI Card Compex WL54G Cardbus Card Corega CG-WLCB54GT Cardbus Card -- cgit v1.2.3 From fac9b83ea79aa3112ed245d9a4fc2a5c3ec2b7ec Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 18 May 2005 22:46:34 -0700 Subject: [TG3]: Add tagged status support. When supported, use the TAGGED interrupt processing support the chip provides. In this mode, instead of a "on/off" binary semaphore, an incrementing tag scheme is used to ACK interrupts. All MSI supporting chips support TAGGED mode, so the tg3_msi() interrupt handler uses it unconditionally. This invariant is verified when MSI support is tested. Since we can invoke tg3_poll() multiple times per interrupt under high packet load, we fetch a new copy of the tag value in the status block right before we actually do the work. Also, because the tagged status tells the chip exactly which work we have processed, we can make two optimizations: 1) tg3_restart_ints() need not check tg3_has_work() 2) the tg3_timer() need not poke the chip 10 times per second to keep from losing interrupt events Based upon valuable feedback from Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 195 +++++++++++++++++++++++++++++++++++++++--------------- drivers/net/tg3.h | 2 + 2 files changed, 142 insertions(+), 55 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index f79b02e80e7..488b8c65252 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -420,7 +420,8 @@ static void tg3_enable_ints(struct tg3 *tp) { tw32(TG3PCI_MISC_HOST_CTRL, (tp->misc_host_ctrl & ~MISC_HOST_CTRL_MASK_PCI_INT)); - tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000000); + tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, + (tp->last_tag << 24)); tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW); tg3_cond_int(tp); @@ -455,10 +456,16 @@ static void tg3_restart_ints(struct tg3 *tp) { tw32(TG3PCI_MISC_HOST_CTRL, (tp->misc_host_ctrl & ~MISC_HOST_CTRL_MASK_PCI_INT)); - tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000000); + tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, + tp->last_tag << 24); mmiowb(); - if (tg3_has_work(tp)) + /* When doing tagged status, this work check is unnecessary. + * The last_tag we write above tells the chip which piece of + * work we've completed. + */ + if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) && + tg3_has_work(tp)) tw32(HOSTCC_MODE, tp->coalesce_mode | (HOSTCC_MODE_ENABLE | HOSTCC_MODE_NOW)); } @@ -2862,6 +2869,9 @@ static int tg3_poll(struct net_device *netdev, int *budget) spin_lock_irqsave(&tp->lock, flags); + if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) + tp->last_tag = sblk->status_tag; + /* handle link change and other phy events */ if (!(tp->tg3_flags & (TG3_FLAG_USE_LINKCHG_REG | @@ -2928,22 +2938,21 @@ static irqreturn_t tg3_msi(int irq, void *dev_id, struct pt_regs *regs) spin_lock_irqsave(&tp->lock, flags); /* - * writing any value to intr-mbox-0 clears PCI INTA# and + * Writing any value to intr-mbox-0 clears PCI INTA# and * chip-internal interrupt pending events. - * writing non-zero to intr-mbox-0 additional tells the + * Writing non-zero to intr-mbox-0 additional tells the * NIC to stop sending us irqs, engaging "in-intr-handler" * event coalescing. */ tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001); + tp->last_tag = sblk->status_tag; sblk->status &= ~SD_STATUS_UPDATED; - if (likely(tg3_has_work(tp))) netif_rx_schedule(dev); /* schedule NAPI poll */ else { - /* no work, re-enable interrupts - */ + /* No work, re-enable interrupts. */ tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, - 0x00000000); + tp->last_tag << 24); } spin_unlock_irqrestore(&tp->lock, flags); @@ -2969,21 +2978,62 @@ static irqreturn_t tg3_interrupt(int irq, void *dev_id, struct pt_regs *regs) if ((sblk->status & SD_STATUS_UPDATED) || !(tr32(TG3PCI_PCISTATE) & PCISTATE_INT_NOT_ACTIVE)) { /* - * writing any value to intr-mbox-0 clears PCI INTA# and + * Writing any value to intr-mbox-0 clears PCI INTA# and * chip-internal interrupt pending events. - * writing non-zero to intr-mbox-0 additional tells the + * Writing non-zero to intr-mbox-0 additional tells the * NIC to stop sending us irqs, engaging "in-intr-handler" * event coalescing. */ tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001); + sblk->status &= ~SD_STATUS_UPDATED; + if (likely(tg3_has_work(tp))) + netif_rx_schedule(dev); /* schedule NAPI poll */ + else { + /* No work, shared interrupt perhaps? re-enable + * interrupts, and flush that PCI write + */ + tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, + 0x00000000); + tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW); + } + } else { /* shared interrupt */ + handled = 0; + } + + spin_unlock_irqrestore(&tp->lock, flags); + + return IRQ_RETVAL(handled); +} + +static irqreturn_t tg3_interrupt_tagged(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = dev_id; + struct tg3 *tp = netdev_priv(dev); + struct tg3_hw_status *sblk = tp->hw_status; + unsigned long flags; + unsigned int handled = 1; + + spin_lock_irqsave(&tp->lock, flags); + + /* In INTx mode, it is possible for the interrupt to arrive at + * the CPU before the status block posted prior to the interrupt. + * Reading the PCI State register will confirm whether the + * interrupt is ours and will flush the status block. + */ + if ((sblk->status & SD_STATUS_UPDATED) || + !(tr32(TG3PCI_PCISTATE) & PCISTATE_INT_NOT_ACTIVE)) { /* - * Flush PCI write. This also guarantees that our - * status block has been flushed to host memory. + * writing any value to intr-mbox-0 clears PCI INTA# and + * chip-internal interrupt pending events. + * writing non-zero to intr-mbox-0 additional tells the + * NIC to stop sending us irqs, engaging "in-intr-handler" + * event coalescing. */ - tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW); + tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, + 0x00000001); + tp->last_tag = sblk->status_tag; sblk->status &= ~SD_STATUS_UPDATED; - if (likely(tg3_has_work(tp))) netif_rx_schedule(dev); /* schedule NAPI poll */ else { @@ -2991,7 +3041,7 @@ static irqreturn_t tg3_interrupt(int irq, void *dev_id, struct pt_regs *regs) * interrupts, and flush that PCI write */ tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, - 0x00000000); + tp->last_tag << 24); tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW); } } else { /* shared interrupt */ @@ -5445,7 +5495,8 @@ static int tg3_reset_hw(struct tg3 *tp) udelay(100); tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0); - tr32(MAILBOX_INTERRUPT_0); + tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW); + tp->last_tag = 0; if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) { tw32_f(DMAC_MODE, DMAC_MODE_ENABLE); @@ -5723,31 +5774,33 @@ static void tg3_timer(unsigned long __opaque) spin_lock_irqsave(&tp->lock, flags); spin_lock(&tp->tx_lock); - /* All of this garbage is because when using non-tagged - * IRQ status the mailbox/status_block protocol the chip - * uses with the cpu is race prone. - */ - if (tp->hw_status->status & SD_STATUS_UPDATED) { - tw32(GRC_LOCAL_CTRL, - tp->grc_local_ctrl | GRC_LCLCTRL_SETINT); - } else { - tw32(HOSTCC_MODE, tp->coalesce_mode | - (HOSTCC_MODE_ENABLE | HOSTCC_MODE_NOW)); - } + if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) { + /* All of this garbage is because when using non-tagged + * IRQ status the mailbox/status_block protocol the chip + * uses with the cpu is race prone. + */ + if (tp->hw_status->status & SD_STATUS_UPDATED) { + tw32(GRC_LOCAL_CTRL, + tp->grc_local_ctrl | GRC_LCLCTRL_SETINT); + } else { + tw32(HOSTCC_MODE, tp->coalesce_mode | + (HOSTCC_MODE_ENABLE | HOSTCC_MODE_NOW)); + } - if (!(tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) { - tp->tg3_flags2 |= TG3_FLG2_RESTART_TIMER; - spin_unlock(&tp->tx_lock); - spin_unlock_irqrestore(&tp->lock, flags); - schedule_work(&tp->reset_task); - return; + if (!(tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) { + tp->tg3_flags2 |= TG3_FLG2_RESTART_TIMER; + spin_unlock(&tp->tx_lock); + spin_unlock_irqrestore(&tp->lock, flags); + schedule_work(&tp->reset_task); + return; + } } - if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) - tg3_periodic_fetch_stats(tp); - /* This part only runs once per second. */ if (!--tp->timer_counter) { + if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) + tg3_periodic_fetch_stats(tp); + if (tp->tg3_flags & TG3_FLAG_USE_LINKCHG_REG) { u32 mac_stat; int phy_event; @@ -5846,9 +5899,13 @@ static int tg3_test_interrupt(struct tg3 *tp) if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) err = request_irq(tp->pdev->irq, tg3_msi, SA_SAMPLE_RANDOM, dev->name, dev); - else - err = request_irq(tp->pdev->irq, tg3_interrupt, + else { + irqreturn_t (*fn)(int, void *, struct pt_regs *)=tg3_interrupt; + if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) + fn = tg3_interrupt_tagged; + err = request_irq(tp->pdev->irq, fn, SA_SHIRQ | SA_SAMPLE_RANDOM, dev->name, dev); + } if (err) return err; @@ -5900,9 +5957,14 @@ static int tg3_test_msi(struct tg3 *tp) tp->tg3_flags2 &= ~TG3_FLG2_USING_MSI; - err = request_irq(tp->pdev->irq, tg3_interrupt, - SA_SHIRQ | SA_SAMPLE_RANDOM, dev->name, dev); + { + irqreturn_t (*fn)(int, void *, struct pt_regs *)=tg3_interrupt; + if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) + fn = tg3_interrupt_tagged; + err = request_irq(tp->pdev->irq, fn, + SA_SHIRQ | SA_SAMPLE_RANDOM, dev->name, dev); + } if (err) return err; @@ -5948,7 +6010,13 @@ static int tg3_open(struct net_device *dev) if ((tp->tg3_flags2 & TG3_FLG2_5750_PLUS) && (GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5750_AX) && (GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5750_BX)) { - if (pci_enable_msi(tp->pdev) == 0) { + /* All MSI supporting chips should support tagged + * status. Assert that this is the case. + */ + if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) { + printk(KERN_WARNING PFX "%s: MSI without TAGGED? " + "Not using MSI.\n", tp->dev->name); + } else if (pci_enable_msi(tp->pdev) == 0) { u32 msi_mode; msi_mode = tr32(MSGINT_MODE); @@ -5959,9 +6027,14 @@ static int tg3_open(struct net_device *dev) if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) err = request_irq(tp->pdev->irq, tg3_msi, SA_SAMPLE_RANDOM, dev->name, dev); - else - err = request_irq(tp->pdev->irq, tg3_interrupt, + else { + irqreturn_t (*fn)(int, void *, struct pt_regs *)=tg3_interrupt; + if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) + fn = tg3_interrupt_tagged; + + err = request_irq(tp->pdev->irq, fn, SA_SHIRQ | SA_SAMPLE_RANDOM, dev->name, dev); + } if (err) { if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) { @@ -5980,9 +6053,16 @@ static int tg3_open(struct net_device *dev) tg3_halt(tp, 1); tg3_free_rings(tp); } else { - tp->timer_offset = HZ / 10; - tp->timer_counter = tp->timer_multiplier = 10; - tp->asf_counter = tp->asf_multiplier = (10 * 120); + if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) + tp->timer_offset = HZ; + else + tp->timer_offset = HZ / 10; + + BUG_ON(tp->timer_offset > HZ); + tp->timer_counter = tp->timer_multiplier = + (HZ / tp->timer_offset); + tp->asf_counter = tp->asf_multiplier = + ((HZ / tp->timer_offset) * 120); init_timer(&tp->timer); tp->timer.expires = jiffies + tp->timer_offset; @@ -6005,6 +6085,7 @@ static int tg3_open(struct net_device *dev) if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) { err = tg3_test_msi(tp); + if (err) { spin_lock_irq(&tp->lock); spin_lock(&tp->tx_lock); @@ -8422,15 +8503,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) tp->tg3_flags2 |= TG3_FLG2_PHY_BER_BUG; - /* Only 5701 and later support tagged irq status mode. - * Also, 5788 chips cannot use tagged irq status. - * - * However, since we are using NAPI avoid tagged irq status - * because the interrupt condition is more difficult to - * fully clear in that mode. - */ tp->coalesce_mode = 0; - if (GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5700_AX && GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5700_BX) tp->coalesce_mode |= HOSTCC_MODE_32BYTE; @@ -8494,6 +8567,18 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) grc_misc_cfg == GRC_MISC_CFG_BOARD_ID_5788M)) tp->tg3_flags2 |= TG3_FLG2_IS_5788; + if (!(tp->tg3_flags2 & TG3_FLG2_IS_5788) && + (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700)) + tp->tg3_flags |= TG3_FLAG_TAGGED_STATUS; + if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) { + tp->coalesce_mode |= (HOSTCC_MODE_CLRTICK_RXBD | + HOSTCC_MODE_CLRTICK_TXBD); + + tp->misc_host_ctrl |= MISC_HOST_CTRL_TAGGED_STATUS; + pci_write_config_dword(tp->pdev, TG3PCI_MISC_HOST_CTRL, + tp->misc_host_ctrl); + } + /* these are limited to 10/100 only */ if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 && (grc_misc_cfg == 0x8000 || grc_misc_cfg == 0x4000)) || diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index 8de6f21037b..44c65160a20 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -2023,6 +2023,7 @@ struct tg3 { struct tg3_hw_status *hw_status; dma_addr_t status_mapping; + u32 last_tag; u32 msg_enable; @@ -2068,6 +2069,7 @@ struct tg3 { u32 rx_offset; u32 tg3_flags; +#define TG3_FLAG_TAGGED_STATUS 0x00000001 #define TG3_FLAG_TXD_MBOX_HWBUG 0x00000002 #define TG3_FLAG_RX_CHECKSUMS 0x00000004 #define TG3_FLAG_USE_LINKCHG_REG 0x00000008 -- cgit v1.2.3 From 15f9850d3c2d46f5851a424d2990a18b5bb5ebfd Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 18 May 2005 22:49:26 -0700 Subject: [TG3]: Set minimal hw interrupt mitigation. Even though we do software interrupt mitigation via NAPI, it still helps to have some minimal hw assisted mitigation. This helps, particularly, on systems where register I/O overhead is much greater than the CPU horsepower. For example, it helps on NUMA systems. In such cases the PIO overhead to disable interrupts for NAPI accounts for the majority of the packet processing cost. The CPU is fast enough such that only a single packet is processed by each NAPI poll call. Thanks to Michael Chan for reviewing this patch. Signed-off-by: David S. Miller --- drivers/net/tg3.c | 72 +++++++++++++++++++++++++++++++++++++++++++++---------- drivers/net/tg3.h | 6 ++++- 2 files changed, 64 insertions(+), 14 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 488b8c65252..3df5b78d269 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -2507,7 +2507,7 @@ static int tg3_setup_phy(struct tg3 *tp, int force_reset) if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) { if (netif_carrier_ok(tp->dev)) { tw32(HOSTCC_STAT_COAL_TICKS, - DEFAULT_STAT_COAL_TICKS); + tp->coal.stats_block_coalesce_usecs); } else { tw32(HOSTCC_STAT_COAL_TICKS, 0); } @@ -5094,6 +5094,27 @@ static void tg3_set_bdinfo(struct tg3 *tp, u32 bdinfo_addr, } static void __tg3_set_rx_mode(struct net_device *); +static void tg3_set_coalesce(struct tg3 *tp, struct ethtool_coalesce *ec) +{ + tw32(HOSTCC_RXCOL_TICKS, ec->rx_coalesce_usecs); + tw32(HOSTCC_TXCOL_TICKS, ec->tx_coalesce_usecs); + tw32(HOSTCC_RXMAX_FRAMES, ec->rx_max_coalesced_frames); + tw32(HOSTCC_TXMAX_FRAMES, ec->tx_max_coalesced_frames); + if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) { + tw32(HOSTCC_RXCOAL_TICK_INT, ec->rx_coalesce_usecs_irq); + tw32(HOSTCC_TXCOAL_TICK_INT, ec->tx_coalesce_usecs_irq); + } + tw32(HOSTCC_RXCOAL_MAXF_INT, ec->rx_max_coalesced_frames_irq); + tw32(HOSTCC_TXCOAL_MAXF_INT, ec->tx_max_coalesced_frames_irq); + if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) { + u32 val = ec->stats_block_coalesce_usecs; + + if (!netif_carrier_ok(tp->dev)) + val = 0; + + tw32(HOSTCC_STAT_COAL_TICKS, val); + } +} /* tp->lock is held. */ static int tg3_reset_hw(struct tg3 *tp) @@ -5416,16 +5437,7 @@ static int tg3_reset_hw(struct tg3 *tp) udelay(10); } - tw32(HOSTCC_RXCOL_TICKS, 0); - tw32(HOSTCC_TXCOL_TICKS, LOW_TXCOL_TICKS); - tw32(HOSTCC_RXMAX_FRAMES, 1); - tw32(HOSTCC_TXMAX_FRAMES, LOW_RXMAX_FRAMES); - if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) { - tw32(HOSTCC_RXCOAL_TICK_INT, 0); - tw32(HOSTCC_TXCOAL_TICK_INT, 0); - } - tw32(HOSTCC_RXCOAL_MAXF_INT, 1); - tw32(HOSTCC_TXCOAL_MAXF_INT, 0); + tg3_set_coalesce(tp, &tp->coal); /* set status block DMA address */ tw32(HOSTCC_STATUS_BLK_HOST_ADDR + TG3_64BIT_REG_HIGH, @@ -5438,8 +5450,6 @@ static int tg3_reset_hw(struct tg3 *tp) * the tg3_periodic_fetch_stats call there, and * tg3_get_stats to see how this works for 5705/5750 chips. */ - tw32(HOSTCC_STAT_COAL_TICKS, - DEFAULT_STAT_COAL_TICKS); tw32(HOSTCC_STATS_BLK_HOST_ADDR + TG3_64BIT_REG_HIGH, ((u64) tp->stats_mapping >> 32)); tw32(HOSTCC_STATS_BLK_HOST_ADDR + TG3_64BIT_REG_LOW, @@ -7284,6 +7294,14 @@ static void tg3_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) } #endif +static int tg3_get_coalesce(struct net_device *dev, struct ethtool_coalesce *ec) +{ + struct tg3 *tp = netdev_priv(dev); + + memcpy(ec, &tp->coal, sizeof(*ec)); + return 0; +} + static struct ethtool_ops tg3_ethtool_ops = { .get_settings = tg3_get_settings, .set_settings = tg3_set_settings, @@ -7316,6 +7334,7 @@ static struct ethtool_ops tg3_ethtool_ops = { .get_strings = tg3_get_strings, .get_stats_count = tg3_get_stats_count, .get_ethtool_stats = tg3_get_ethtool_stats, + .get_coalesce = tg3_get_coalesce, }; static void __devinit tg3_get_eeprom_size(struct tg3 *tp) @@ -9096,6 +9115,31 @@ static struct pci_dev * __devinit tg3_find_5704_peer(struct tg3 *tp) return peer; } +static void __devinit tg3_init_coal(struct tg3 *tp) +{ + struct ethtool_coalesce *ec = &tp->coal; + + memset(ec, 0, sizeof(*ec)); + ec->cmd = ETHTOOL_GCOALESCE; + ec->rx_coalesce_usecs = LOW_RXCOL_TICKS; + ec->tx_coalesce_usecs = LOW_TXCOL_TICKS; + ec->rx_max_coalesced_frames = LOW_RXMAX_FRAMES; + ec->tx_max_coalesced_frames = LOW_TXMAX_FRAMES; + ec->rx_coalesce_usecs_irq = DEFAULT_RXCOAL_TICK_INT; + ec->tx_coalesce_usecs_irq = DEFAULT_TXCOAL_TICK_INT; + ec->rx_max_coalesced_frames_irq = DEFAULT_RXCOAL_MAXF_INT; + ec->tx_max_coalesced_frames_irq = DEFAULT_TXCOAL_MAXF_INT; + ec->stats_block_coalesce_usecs = DEFAULT_STAT_COAL_TICKS; + + if (tp->coalesce_mode & (HOSTCC_MODE_CLRTICK_RXBD | + HOSTCC_MODE_CLRTICK_TXBD)) { + ec->rx_coalesce_usecs = LOW_RXCOL_TICKS_CLRTCKS; + ec->rx_coalesce_usecs_irq = DEFAULT_RXCOAL_TICK_INT_CLRTCKS; + ec->tx_coalesce_usecs = LOW_TXCOL_TICKS_CLRTCKS; + ec->tx_coalesce_usecs_irq = DEFAULT_TXCOAL_TICK_INT_CLRTCKS; + } +} + static int __devinit tg3_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -9341,6 +9385,8 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, /* flow control autonegotiation is default behavior */ tp->tg3_flags |= TG3_FLAG_PAUSE_AUTONEG; + tg3_init_coal(tp); + err = register_netdev(dev); if (err) { printk(KERN_ERR PFX "Cannot register net device, " diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index 44c65160a20..993f84c93dc 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -876,10 +876,12 @@ #define HOSTCC_STATUS_ERROR_ATTN 0x00000004 #define HOSTCC_RXCOL_TICKS 0x00003c08 #define LOW_RXCOL_TICKS 0x00000032 +#define LOW_RXCOL_TICKS_CLRTCKS 0x00000014 #define DEFAULT_RXCOL_TICKS 0x00000048 #define HIGH_RXCOL_TICKS 0x00000096 #define HOSTCC_TXCOL_TICKS 0x00003c0c #define LOW_TXCOL_TICKS 0x00000096 +#define LOW_TXCOL_TICKS_CLRTCKS 0x00000048 #define DEFAULT_TXCOL_TICKS 0x0000012c #define HIGH_TXCOL_TICKS 0x00000145 #define HOSTCC_RXMAX_FRAMES 0x00003c10 @@ -892,8 +894,10 @@ #define HIGH_TXMAX_FRAMES 0x00000052 #define HOSTCC_RXCOAL_TICK_INT 0x00003c18 #define DEFAULT_RXCOAL_TICK_INT 0x00000019 +#define DEFAULT_RXCOAL_TICK_INT_CLRTCKS 0x00000014 #define HOSTCC_TXCOAL_TICK_INT 0x00003c1c #define DEFAULT_TXCOAL_TICK_INT 0x00000019 +#define DEFAULT_TXCOAL_TICK_INT_CLRTCKS 0x00000014 #define HOSTCC_RXCOAL_MAXF_INT 0x00003c20 #define DEFAULT_RXCOAL_MAXF_INT 0x00000005 #define HOSTCC_TXCOAL_MAXF_INT 0x00003c24 @@ -2227,7 +2231,7 @@ struct tg3 { #define SST_25VF0X0_PAGE_SIZE 4098 - + struct ethtool_coalesce coal; }; #endif /* !(_T3_H) */ -- cgit v1.2.3 From 59e6b4343299373bc10dd131ab5142f53ddd838a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 18 May 2005 22:50:10 -0700 Subject: [TG3]: Refine DMA boundary setting. Extract DMA boundary bit selection into a seperate function, tg3_calc_dma_bndry(). Call this from tg3_test_dma(). Make DMA test more reliable by using no DMA boundry setting during the test. If the test passes, then use the setting we selected before the test. Signed-off-by: David S. Miller Signed-off-by: Michael Chan --- drivers/net/tg3.c | 207 ++++++++++++++++++++++++++++++++++++++++++------------ 1 file changed, 163 insertions(+), 44 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 3df5b78d269..4ab9680ffbd 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -8775,6 +8775,146 @@ static int __devinit tg3_get_device_address(struct tg3 *tp) return 0; } +#define BOUNDARY_SINGLE_CACHELINE 1 +#define BOUNDARY_MULTI_CACHELINE 2 + +static u32 __devinit tg3_calc_dma_bndry(struct tg3 *tp, u32 val) +{ + int cacheline_size; + u8 byte; + int goal; + + pci_read_config_byte(tp->pdev, PCI_CACHE_LINE_SIZE, &byte); + if (byte == 0) + cacheline_size = 1024; + else + cacheline_size = (int) byte * 4; + + /* On 5703 and later chips, the boundary bits have no + * effect. + */ + if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700 && + GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701 && + !(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)) + goto out; + +#if defined(CONFIG_PPC64) || defined(CONFIG_IA64) || defined(CONFIG_PARISC) + goal = BOUNDARY_MULTI_CACHELINE; +#else +#if defined(CONFIG_SPARC64) || defined(CONFIG_ALPHA) + goal = BOUNDARY_SINGLE_CACHELINE; +#else + goal = 0; +#endif +#endif + + if (!goal) + goto out; + + /* PCI controllers on most RISC systems tend to disconnect + * when a device tries to burst across a cache-line boundary. + * Therefore, letting tg3 do so just wastes PCI bandwidth. + * + * Unfortunately, for PCI-E there are only limited + * write-side controls for this, and thus for reads + * we will still get the disconnects. We'll also waste + * these PCI cycles for both read and write for chips + * other than 5700 and 5701 which do not implement the + * boundary bits. + */ + if ((tp->tg3_flags & TG3_FLAG_PCIX_MODE) && + !(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)) { + switch (cacheline_size) { + case 16: + case 32: + case 64: + case 128: + if (goal == BOUNDARY_SINGLE_CACHELINE) { + val |= (DMA_RWCTRL_READ_BNDRY_128_PCIX | + DMA_RWCTRL_WRITE_BNDRY_128_PCIX); + } else { + val |= (DMA_RWCTRL_READ_BNDRY_384_PCIX | + DMA_RWCTRL_WRITE_BNDRY_384_PCIX); + } + break; + + case 256: + val |= (DMA_RWCTRL_READ_BNDRY_256_PCIX | + DMA_RWCTRL_WRITE_BNDRY_256_PCIX); + break; + + default: + val |= (DMA_RWCTRL_READ_BNDRY_384_PCIX | + DMA_RWCTRL_WRITE_BNDRY_384_PCIX); + break; + }; + } else if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) { + switch (cacheline_size) { + case 16: + case 32: + case 64: + if (goal == BOUNDARY_SINGLE_CACHELINE) { + val &= ~DMA_RWCTRL_WRITE_BNDRY_DISAB_PCIE; + val |= DMA_RWCTRL_WRITE_BNDRY_64_PCIE; + break; + } + /* fallthrough */ + case 128: + default: + val &= ~DMA_RWCTRL_WRITE_BNDRY_DISAB_PCIE; + val |= DMA_RWCTRL_WRITE_BNDRY_128_PCIE; + break; + }; + } else { + switch (cacheline_size) { + case 16: + if (goal == BOUNDARY_SINGLE_CACHELINE) { + val |= (DMA_RWCTRL_READ_BNDRY_16 | + DMA_RWCTRL_WRITE_BNDRY_16); + break; + } + /* fallthrough */ + case 32: + if (goal == BOUNDARY_SINGLE_CACHELINE) { + val |= (DMA_RWCTRL_READ_BNDRY_32 | + DMA_RWCTRL_WRITE_BNDRY_32); + break; + } + /* fallthrough */ + case 64: + if (goal == BOUNDARY_SINGLE_CACHELINE) { + val |= (DMA_RWCTRL_READ_BNDRY_64 | + DMA_RWCTRL_WRITE_BNDRY_64); + break; + } + /* fallthrough */ + case 128: + if (goal == BOUNDARY_SINGLE_CACHELINE) { + val |= (DMA_RWCTRL_READ_BNDRY_128 | + DMA_RWCTRL_WRITE_BNDRY_128); + break; + } + /* fallthrough */ + case 256: + val |= (DMA_RWCTRL_READ_BNDRY_256 | + DMA_RWCTRL_WRITE_BNDRY_256); + break; + case 512: + val |= (DMA_RWCTRL_READ_BNDRY_512 | + DMA_RWCTRL_WRITE_BNDRY_512); + break; + case 1024: + default: + val |= (DMA_RWCTRL_READ_BNDRY_1024 | + DMA_RWCTRL_WRITE_BNDRY_1024); + break; + }; + } + +out: + return val; +} + static int __devinit tg3_do_test_dma(struct tg3 *tp, u32 *buf, dma_addr_t buf_dma, int size, int to_device) { struct tg3_internal_buffer_desc test_desc; @@ -8861,7 +9001,7 @@ static int __devinit tg3_do_test_dma(struct tg3 *tp, u32 *buf, dma_addr_t buf_dm static int __devinit tg3_test_dma(struct tg3 *tp) { dma_addr_t buf_dma; - u32 *buf; + u32 *buf, saved_dma_rwctrl; int ret; buf = pci_alloc_consistent(tp->pdev, TEST_BUFFER_SIZE, &buf_dma); @@ -8873,46 +9013,7 @@ static int __devinit tg3_test_dma(struct tg3 *tp) tp->dma_rwctrl = ((0x7 << DMA_RWCTRL_PCI_WRITE_CMD_SHIFT) | (0x6 << DMA_RWCTRL_PCI_READ_CMD_SHIFT)); -#ifndef CONFIG_X86 - { - u8 byte; - int cacheline_size; - pci_read_config_byte(tp->pdev, PCI_CACHE_LINE_SIZE, &byte); - - if (byte == 0) - cacheline_size = 1024; - else - cacheline_size = (int) byte * 4; - - switch (cacheline_size) { - case 16: - case 32: - case 64: - case 128: - if ((tp->tg3_flags & TG3_FLAG_PCIX_MODE) && - !(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)) { - tp->dma_rwctrl |= - DMA_RWCTRL_WRITE_BNDRY_384_PCIX; - break; - } else if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) { - tp->dma_rwctrl &= - ~(DMA_RWCTRL_PCI_WRITE_CMD); - tp->dma_rwctrl |= - DMA_RWCTRL_WRITE_BNDRY_128_PCIE; - break; - } - /* fallthrough */ - case 256: - if (!(tp->tg3_flags & TG3_FLAG_PCIX_MODE) && - !(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)) - tp->dma_rwctrl |= - DMA_RWCTRL_WRITE_BNDRY_256; - else if (!(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)) - tp->dma_rwctrl |= - DMA_RWCTRL_WRITE_BNDRY_256_PCIX; - }; - } -#endif + tp->dma_rwctrl = tg3_calc_dma_bndry(tp, tp->dma_rwctrl); if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) { /* DMA read watermark not used on PCIE */ @@ -8931,7 +9032,7 @@ static int __devinit tg3_test_dma(struct tg3 *tp) if (ccval == 0x6 || ccval == 0x7) tp->dma_rwctrl |= DMA_RWCTRL_ONE_DMA; - /* Set bit 23 to renable PCIX hw bug fix */ + /* Set bit 23 to enable PCIX hw bug fix */ tp->dma_rwctrl |= 0x009f0000; } else { tp->dma_rwctrl |= 0x001b000f; @@ -8972,6 +9073,13 @@ static int __devinit tg3_test_dma(struct tg3 *tp) GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701) goto out; + /* It is best to perform DMA test with maximum write burst size + * to expose the 5700/5701 write DMA bug. + */ + saved_dma_rwctrl = tp->dma_rwctrl; + tp->dma_rwctrl &= ~DMA_RWCTRL_WRITE_BNDRY_MASK; + tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl); + while (1) { u32 *p = buf, i; @@ -9010,8 +9118,9 @@ static int __devinit tg3_test_dma(struct tg3 *tp) if (p[i] == i) continue; - if ((tp->dma_rwctrl & DMA_RWCTRL_WRITE_BNDRY_MASK) == - DMA_RWCTRL_WRITE_BNDRY_DISAB) { + if ((tp->dma_rwctrl & DMA_RWCTRL_WRITE_BNDRY_MASK) != + DMA_RWCTRL_WRITE_BNDRY_16) { + tp->dma_rwctrl &= ~DMA_RWCTRL_WRITE_BNDRY_MASK; tp->dma_rwctrl |= DMA_RWCTRL_WRITE_BNDRY_16; tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl); break; @@ -9028,6 +9137,14 @@ static int __devinit tg3_test_dma(struct tg3 *tp) break; } } + if ((tp->dma_rwctrl & DMA_RWCTRL_WRITE_BNDRY_MASK) != + DMA_RWCTRL_WRITE_BNDRY_16) { + /* DMA test passed without adjusting DMA boundary, + * just restore the calculated DMA boundary + */ + tp->dma_rwctrl = saved_dma_rwctrl; + tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl); + } out: pci_free_consistent(tp->pdev, TEST_BUFFER_SIZE, buf, buf_dma); @@ -9429,6 +9546,8 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, (tp->tg3_flags & TG3_FLAG_SPLIT_MODE) != 0, (tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED) == 0, (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) != 0); + printk(KERN_INFO "%s: dma_rwctrl[%08x]\n", + dev->name, tp->dma_rwctrl); return 0; -- cgit v1.2.3 From f7383c22246cfccbe912541dd83103009ed2b537 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 18 May 2005 22:50:53 -0700 Subject: [TG3]: In tg3_poll(), resample status_tag after doing work. Signed-off-by: David S. Miller --- drivers/net/tg3.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 4ab9680ffbd..4d2bdbdd34e 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -2869,9 +2869,6 @@ static int tg3_poll(struct net_device *netdev, int *budget) spin_lock_irqsave(&tp->lock, flags); - if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) - tp->last_tag = sblk->status_tag; - /* handle link change and other phy events */ if (!(tp->tg3_flags & (TG3_FLAG_USE_LINKCHG_REG | @@ -2896,7 +2893,6 @@ static int tg3_poll(struct net_device *netdev, int *budget) * All RX "locking" is done by ensuring outside * code synchronizes with dev->poll() */ - done = 1; if (sblk->idx[0].rx_producer != tp->rx_rcb_ptr) { int orig_budget = *budget; int work_done; @@ -2908,12 +2904,14 @@ static int tg3_poll(struct net_device *netdev, int *budget) *budget -= work_done; netdev->quota -= work_done; - - if (work_done >= orig_budget) - done = 0; } + if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) + tp->last_tag = sblk->status_tag; + rmb(); + /* if no more work, tell net stack and NIC we're done */ + done = !tg3_has_work(tp); if (done) { spin_lock_irqsave(&tp->lock, flags); __netif_rx_complete(netdev); -- cgit v1.2.3 From d8659255c599ba497bcfb8b4abc187d9e0951d99 Mon Sep 17 00:00:00 2001 From: Xose Vazquez Perez Date: Mon, 23 May 2005 12:54:51 -0700 Subject: [TG3]: Add 5752M device ID. Add 0x1601 as 5752M, it's a 5752 but for mobile PCs. Stolen from Broadcom bcm5700-8.1.55 driver. Someone forgot to add it to tg3 ;-) Signed-off-by: David S. Miller --- drivers/net/tg3.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 4d2bdbdd34e..ebd882fbc70 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -206,6 +206,8 @@ static struct pci_device_id tg3_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5752, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, + { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5752M, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5753, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5753M, -- cgit v1.2.3 From 413f5431a5a27e44c6610de640e507e1e3c885f4 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 23 May 2005 13:13:15 -0700 Subject: [TG3]: Update driver version and reldate. Signed-off-by: David S. Miller --- drivers/net/tg3.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index ebd882fbc70..fb168855b25 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -61,8 +61,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.27" -#define DRV_MODULE_RELDATE "May 5, 2005" +#define DRV_MODULE_VERSION "3.28" +#define DRV_MODULE_RELDATE "May 23, 2005" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 -- cgit v1.2.3 From ded7340d9d9142807a1ef94ab9c51d13ab76a1c9 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 23 May 2005 13:59:47 -0700 Subject: [TG3]: Increase TEST_BUFFER_SIZE to 8K. This makes the DMA bug workaround test more likely to find the problem on some systems. Signed-off-by: David S. Miller --- drivers/net/tg3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index fb168855b25..2bb022ab668 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -8996,7 +8996,7 @@ static int __devinit tg3_do_test_dma(struct tg3 *tp, u32 *buf, dma_addr_t buf_dm return ret; } -#define TEST_BUFFER_SIZE 0x400 +#define TEST_BUFFER_SIZE 0x2000 static int __devinit tg3_test_dma(struct tg3 *tp) { -- cgit v1.2.3 From d1faeaeb95a05275cf0c5b51b88f2fa833434625 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 23 May 2005 14:00:44 -0700 Subject: [TG3]: Update driver version. Signed-off-by: David S. Miller --- drivers/net/tg3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 2bb022ab668..f10dd74988c 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -61,7 +61,7 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.28" +#define DRV_MODULE_VERSION "3.29" #define DRV_MODULE_RELDATE "May 23, 2005" #define TG3_DEF_MAC_MODE 0 -- cgit v1.2.3 From 9092f46b5aed4515d9a427d5dab3be1584851f07 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Wed, 18 May 2005 13:41:33 -0400 Subject: [PATCH] tulip: add return to ULI526X clause in tulip_mdio_write The 'if' clause for ULI526X in tulip_mdio_write allows for spin_unlock_irqrestore to be called twice for tp->mii_lock. I believe this is caused by the unintentional omission of a return at the end of that clause. This patch adds that return. Signed-off-by: John W. Linville --- drivers/net/tulip/media.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/tulip/media.c b/drivers/net/tulip/media.c index edae09a4b02..919c40cd635 100644 --- a/drivers/net/tulip/media.c +++ b/drivers/net/tulip/media.c @@ -174,6 +174,7 @@ void tulip_mdio_write(struct net_device *dev, int phy_id, int location, int val) break; } spin_unlock_irqrestore(&tp->mii_lock, flags); + return; } /* Establish sync by sending 32 logic ones. */ -- cgit v1.2.3 From 2f872f0401d4b470990864fbf99c19130f25ad4d Mon Sep 17 00:00:00 2001 From: Jay Vosburgh Date: Thu, 26 May 2005 12:56:59 -0700 Subject: [BONDING]: bonding using arp_ip_target may stay down with active path Correcting the list traversal makes the problem go away. Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 770e28f98fd..269a5e40734 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3037,7 +3037,7 @@ static void bond_activebackup_arp_mon(struct net_device *bond_dev) bond_set_slave_inactive_flags(bond->current_arp_slave); /* search for next candidate */ - bond_for_each_slave_from(bond, slave, i, bond->current_arp_slave) { + bond_for_each_slave_from(bond, slave, i, bond->current_arp_slave->next) { if (IS_UP(slave->dev)) { slave->link = BOND_LINK_BACK; bond_set_slave_active_flags(slave); -- cgit v1.2.3 From b6016b767397258b58163494a869f8f1199e6897 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Thu, 26 May 2005 13:03:09 -0700 Subject: [BNX2]: New Broadcom gigabit network driver. A new driver bnx2 for Broadcom bcm5706 is available. The patch also includes new 1000BASE-X advertisement bit definitions in mii.h Thanks to David Miller and Jeff Garzik for reviewing and their valuable feedback. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/Kconfig | 9 + drivers/net/Makefile | 1 + drivers/net/bnx2.c | 5530 +++++++++++++++++++++++++++++++++++++++++++++++++ drivers/net/bnx2.h | 4352 ++++++++++++++++++++++++++++++++++++++ drivers/net/bnx2_fw.h | 2468 ++++++++++++++++++++++ 5 files changed, 12360 insertions(+) create mode 100644 drivers/net/bnx2.c create mode 100644 drivers/net/bnx2.h create mode 100644 drivers/net/bnx2_fw.h (limited to 'drivers/net') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 3a0a55b62aa..9e6501d9881 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2031,6 +2031,15 @@ config TIGON3 To compile this driver as a module, choose M here: the module will be called tg3. This is recommended. +config BNX2 + tristate "Broadcom NetXtremeII support" + depends on PCI + help + This driver supports Broadcom NetXtremeII gigabit Ethernet cards. + + To compile this driver as a module, choose M here: the module + will be called bnx2. This is recommended. + config GIANFAR tristate "Gianfar Ethernet" depends on 85xx || 83xx diff --git a/drivers/net/Makefile b/drivers/net/Makefile index e038d55e4f6..30c7567001f 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -51,6 +51,7 @@ obj-$(CONFIG_NS83820) += ns83820.o obj-$(CONFIG_STNIC) += stnic.o 8390.o obj-$(CONFIG_FEALNX) += fealnx.o obj-$(CONFIG_TIGON3) += tg3.o +obj-$(CONFIG_BNX2) += bnx2.o obj-$(CONFIG_TC35815) += tc35815.o obj-$(CONFIG_SK98LIN) += sk98lin/ obj-$(CONFIG_SKFP) += skfp/ diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c new file mode 100644 index 00000000000..8acc655ec1e --- /dev/null +++ b/drivers/net/bnx2.c @@ -0,0 +1,5530 @@ +/* bnx2.c: Broadcom NX2 network driver. + * + * Copyright (c) 2004, 2005 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * Written by: Michael Chan (mchan@broadcom.com) + */ + +#include "bnx2.h" +#include "bnx2_fw.h" + +#define DRV_MODULE_NAME "bnx2" +#define PFX DRV_MODULE_NAME ": " +#define DRV_MODULE_VERSION "1.2.19" +#define DRV_MODULE_RELDATE "May 23, 2005" + +#define RUN_AT(x) (jiffies + (x)) + +/* Time in jiffies before concluding the transmitter is hung. */ +#define TX_TIMEOUT (5*HZ) + +static char version[] __devinitdata = + "Broadcom NetXtreme II Gigabit Ethernet Driver " DRV_MODULE_NAME " v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; + +MODULE_AUTHOR("Michael Chan "); +MODULE_DESCRIPTION("Broadcom NetXtreme II BCM5706 Driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_MODULE_VERSION); + +static int disable_msi = 0; + +module_param(disable_msi, int, 0); +MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)"); + +typedef enum { + BCM5706 = 0, + NC370T, + NC370I, + BCM5706S, + NC370F, +} board_t; + +/* indexed by board_t, above */ +static struct { + char *name; +} board_info[] __devinitdata = { + { "Broadcom NetXtreme II BCM5706 1000Base-T" }, + { "HP NC370T Multifunction Gigabit Server Adapter" }, + { "HP NC370i Multifunction Gigabit Server Adapter" }, + { "Broadcom NetXtreme II BCM5706 1000Base-SX" }, + { "HP NC370F Multifunction Gigabit Server Adapter" }, + { 0 }, + }; + +static struct pci_device_id bnx2_pci_tbl[] = { + { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_5706, + PCI_VENDOR_ID_HP, 0x3101, 0, 0, NC370T }, + { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_5706, + PCI_VENDOR_ID_HP, 0x3106, 0, 0, NC370I }, + { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_5706, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5706 }, + { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_5706S, + PCI_VENDOR_ID_HP, 0x3102, 0, 0, NC370F }, + { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_5706S, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5706S }, + { 0, } +}; + +static struct flash_spec flash_table[] = +{ + /* Slow EEPROM */ + {0x00000000, 0x40030380, 0x009f0081, 0xa184a053, 0xaf000400, + 1, SEEPROM_PAGE_BITS, SEEPROM_PAGE_SIZE, + SEEPROM_BYTE_ADDR_MASK, SEEPROM_TOTAL_SIZE, + "EEPROM - slow"}, + /* Fast EEPROM */ + {0x02000000, 0x62008380, 0x009f0081, 0xa184a053, 0xaf000400, + 1, SEEPROM_PAGE_BITS, SEEPROM_PAGE_SIZE, + SEEPROM_BYTE_ADDR_MASK, SEEPROM_TOTAL_SIZE, + "EEPROM - fast"}, + /* ATMEL AT45DB011B (buffered flash) */ + {0x02000003, 0x6e008173, 0x00570081, 0x68848353, 0xaf000400, + 1, BUFFERED_FLASH_PAGE_BITS, BUFFERED_FLASH_PAGE_SIZE, + BUFFERED_FLASH_BYTE_ADDR_MASK, BUFFERED_FLASH_TOTAL_SIZE, + "Buffered flash"}, + /* Saifun SA25F005 (non-buffered flash) */ + /* strap, cfg1, & write1 need updates */ + {0x01000003, 0x5f008081, 0x00050081, 0x03840253, 0xaf020406, + 0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE, + SAIFUN_FLASH_BYTE_ADDR_MASK, SAIFUN_FLASH_BASE_TOTAL_SIZE, + "Non-buffered flash (64kB)"}, + /* Saifun SA25F010 (non-buffered flash) */ + /* strap, cfg1, & write1 need updates */ + {0x00000001, 0x47008081, 0x00050081, 0x03840253, 0xaf020406, + 0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE, + SAIFUN_FLASH_BYTE_ADDR_MASK, SAIFUN_FLASH_BASE_TOTAL_SIZE*2, + "Non-buffered flash (128kB)"}, + /* Saifun SA25F020 (non-buffered flash) */ + /* strap, cfg1, & write1 need updates */ + {0x00000003, 0x4f008081, 0x00050081, 0x03840253, 0xaf020406, + 0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE, + SAIFUN_FLASH_BYTE_ADDR_MASK, SAIFUN_FLASH_BASE_TOTAL_SIZE*4, + "Non-buffered flash (256kB)"}, +}; + +MODULE_DEVICE_TABLE(pci, bnx2_pci_tbl); + +static u32 +bnx2_reg_rd_ind(struct bnx2 *bp, u32 offset) +{ + REG_WR(bp, BNX2_PCICFG_REG_WINDOW_ADDRESS, offset); + return (REG_RD(bp, BNX2_PCICFG_REG_WINDOW)); +} + +static void +bnx2_reg_wr_ind(struct bnx2 *bp, u32 offset, u32 val) +{ + REG_WR(bp, BNX2_PCICFG_REG_WINDOW_ADDRESS, offset); + REG_WR(bp, BNX2_PCICFG_REG_WINDOW, val); +} + +static void +bnx2_ctx_wr(struct bnx2 *bp, u32 cid_addr, u32 offset, u32 val) +{ + offset += cid_addr; + REG_WR(bp, BNX2_CTX_DATA_ADR, offset); + REG_WR(bp, BNX2_CTX_DATA, val); +} + +static int +bnx2_read_phy(struct bnx2 *bp, u32 reg, u32 *val) +{ + u32 val1; + int i, ret; + + if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) { + val1 = REG_RD(bp, BNX2_EMAC_MDIO_MODE); + val1 &= ~BNX2_EMAC_MDIO_MODE_AUTO_POLL; + + REG_WR(bp, BNX2_EMAC_MDIO_MODE, val1); + REG_RD(bp, BNX2_EMAC_MDIO_MODE); + + udelay(40); + } + + val1 = (bp->phy_addr << 21) | (reg << 16) | + BNX2_EMAC_MDIO_COMM_COMMAND_READ | BNX2_EMAC_MDIO_COMM_DISEXT | + BNX2_EMAC_MDIO_COMM_START_BUSY; + REG_WR(bp, BNX2_EMAC_MDIO_COMM, val1); + + for (i = 0; i < 50; i++) { + udelay(10); + + val1 = REG_RD(bp, BNX2_EMAC_MDIO_COMM); + if (!(val1 & BNX2_EMAC_MDIO_COMM_START_BUSY)) { + udelay(5); + + val1 = REG_RD(bp, BNX2_EMAC_MDIO_COMM); + val1 &= BNX2_EMAC_MDIO_COMM_DATA; + + break; + } + } + + if (val1 & BNX2_EMAC_MDIO_COMM_START_BUSY) { + *val = 0x0; + ret = -EBUSY; + } + else { + *val = val1; + ret = 0; + } + + if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) { + val1 = REG_RD(bp, BNX2_EMAC_MDIO_MODE); + val1 |= BNX2_EMAC_MDIO_MODE_AUTO_POLL; + + REG_WR(bp, BNX2_EMAC_MDIO_MODE, val1); + REG_RD(bp, BNX2_EMAC_MDIO_MODE); + + udelay(40); + } + + return ret; +} + +static int +bnx2_write_phy(struct bnx2 *bp, u32 reg, u32 val) +{ + u32 val1; + int i, ret; + + if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) { + val1 = REG_RD(bp, BNX2_EMAC_MDIO_MODE); + val1 &= ~BNX2_EMAC_MDIO_MODE_AUTO_POLL; + + REG_WR(bp, BNX2_EMAC_MDIO_MODE, val1); + REG_RD(bp, BNX2_EMAC_MDIO_MODE); + + udelay(40); + } + + val1 = (bp->phy_addr << 21) | (reg << 16) | val | + BNX2_EMAC_MDIO_COMM_COMMAND_WRITE | + BNX2_EMAC_MDIO_COMM_START_BUSY | BNX2_EMAC_MDIO_COMM_DISEXT; + REG_WR(bp, BNX2_EMAC_MDIO_COMM, val1); + + for (i = 0; i < 50; i++) { + udelay(10); + + val1 = REG_RD(bp, BNX2_EMAC_MDIO_COMM); + if (!(val1 & BNX2_EMAC_MDIO_COMM_START_BUSY)) { + udelay(5); + break; + } + } + + if (val1 & BNX2_EMAC_MDIO_COMM_START_BUSY) + ret = -EBUSY; + else + ret = 0; + + if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) { + val1 = REG_RD(bp, BNX2_EMAC_MDIO_MODE); + val1 |= BNX2_EMAC_MDIO_MODE_AUTO_POLL; + + REG_WR(bp, BNX2_EMAC_MDIO_MODE, val1); + REG_RD(bp, BNX2_EMAC_MDIO_MODE); + + udelay(40); + } + + return ret; +} + +static void +bnx2_disable_int(struct bnx2 *bp) +{ + REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD, + BNX2_PCICFG_INT_ACK_CMD_MASK_INT); + REG_RD(bp, BNX2_PCICFG_INT_ACK_CMD); +} + +static void +bnx2_enable_int(struct bnx2 *bp) +{ + u32 val; + + REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD, + BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID | bp->last_status_idx); + + val = REG_RD(bp, BNX2_HC_COMMAND); + REG_WR(bp, BNX2_HC_COMMAND, val | BNX2_HC_COMMAND_COAL_NOW); +} + +static void +bnx2_disable_int_sync(struct bnx2 *bp) +{ + atomic_inc(&bp->intr_sem); + bnx2_disable_int(bp); + synchronize_irq(bp->pdev->irq); +} + +static void +bnx2_netif_stop(struct bnx2 *bp) +{ + bnx2_disable_int_sync(bp); + if (netif_running(bp->dev)) { + netif_poll_disable(bp->dev); + netif_tx_disable(bp->dev); + bp->dev->trans_start = jiffies; /* prevent tx timeout */ + } +} + +static void +bnx2_netif_start(struct bnx2 *bp) +{ + if (atomic_dec_and_test(&bp->intr_sem)) { + if (netif_running(bp->dev)) { + netif_wake_queue(bp->dev); + netif_poll_enable(bp->dev); + bnx2_enable_int(bp); + } + } +} + +static void +bnx2_free_mem(struct bnx2 *bp) +{ + if (bp->stats_blk) { + pci_free_consistent(bp->pdev, sizeof(struct statistics_block), + bp->stats_blk, bp->stats_blk_mapping); + bp->stats_blk = NULL; + } + if (bp->status_blk) { + pci_free_consistent(bp->pdev, sizeof(struct status_block), + bp->status_blk, bp->status_blk_mapping); + bp->status_blk = NULL; + } + if (bp->tx_desc_ring) { + pci_free_consistent(bp->pdev, + sizeof(struct tx_bd) * TX_DESC_CNT, + bp->tx_desc_ring, bp->tx_desc_mapping); + bp->tx_desc_ring = NULL; + } + if (bp->tx_buf_ring) { + kfree(bp->tx_buf_ring); + bp->tx_buf_ring = NULL; + } + if (bp->rx_desc_ring) { + pci_free_consistent(bp->pdev, + sizeof(struct rx_bd) * RX_DESC_CNT, + bp->rx_desc_ring, bp->rx_desc_mapping); + bp->rx_desc_ring = NULL; + } + if (bp->rx_buf_ring) { + kfree(bp->rx_buf_ring); + bp->rx_buf_ring = NULL; + } +} + +static int +bnx2_alloc_mem(struct bnx2 *bp) +{ + bp->tx_buf_ring = kmalloc(sizeof(struct sw_bd) * TX_DESC_CNT, + GFP_KERNEL); + if (bp->tx_buf_ring == NULL) + return -ENOMEM; + + memset(bp->tx_buf_ring, 0, sizeof(struct sw_bd) * TX_DESC_CNT); + bp->tx_desc_ring = pci_alloc_consistent(bp->pdev, + sizeof(struct tx_bd) * + TX_DESC_CNT, + &bp->tx_desc_mapping); + if (bp->tx_desc_ring == NULL) + goto alloc_mem_err; + + bp->rx_buf_ring = kmalloc(sizeof(struct sw_bd) * RX_DESC_CNT, + GFP_KERNEL); + if (bp->rx_buf_ring == NULL) + goto alloc_mem_err; + + memset(bp->rx_buf_ring, 0, sizeof(struct sw_bd) * RX_DESC_CNT); + bp->rx_desc_ring = pci_alloc_consistent(bp->pdev, + sizeof(struct rx_bd) * + RX_DESC_CNT, + &bp->rx_desc_mapping); + if (bp->rx_desc_ring == NULL) + goto alloc_mem_err; + + bp->status_blk = pci_alloc_consistent(bp->pdev, + sizeof(struct status_block), + &bp->status_blk_mapping); + if (bp->status_blk == NULL) + goto alloc_mem_err; + + memset(bp->status_blk, 0, sizeof(struct status_block)); + + bp->stats_blk = pci_alloc_consistent(bp->pdev, + sizeof(struct statistics_block), + &bp->stats_blk_mapping); + if (bp->stats_blk == NULL) + goto alloc_mem_err; + + memset(bp->stats_blk, 0, sizeof(struct statistics_block)); + + return 0; + +alloc_mem_err: + bnx2_free_mem(bp); + return -ENOMEM; +} + +static void +bnx2_report_link(struct bnx2 *bp) +{ + if (bp->link_up) { + netif_carrier_on(bp->dev); + printk(KERN_INFO PFX "%s NIC Link is Up, ", bp->dev->name); + + printk("%d Mbps ", bp->line_speed); + + if (bp->duplex == DUPLEX_FULL) + printk("full duplex"); + else + printk("half duplex"); + + if (bp->flow_ctrl) { + if (bp->flow_ctrl & FLOW_CTRL_RX) { + printk(", receive "); + if (bp->flow_ctrl & FLOW_CTRL_TX) + printk("& transmit "); + } + else { + printk(", transmit "); + } + printk("flow control ON"); + } + printk("\n"); + } + else { + netif_carrier_off(bp->dev); + printk(KERN_ERR PFX "%s NIC Link is Down\n", bp->dev->name); + } +} + +static void +bnx2_resolve_flow_ctrl(struct bnx2 *bp) +{ + u32 local_adv, remote_adv; + + bp->flow_ctrl = 0; + if ((bp->autoneg & (AUTONEG_SPEED | AUTONEG_FLOW_CTRL)) != + (AUTONEG_SPEED | AUTONEG_FLOW_CTRL)) { + + if (bp->duplex == DUPLEX_FULL) { + bp->flow_ctrl = bp->req_flow_ctrl; + } + return; + } + + if (bp->duplex != DUPLEX_FULL) { + return; + } + + bnx2_read_phy(bp, MII_ADVERTISE, &local_adv); + bnx2_read_phy(bp, MII_LPA, &remote_adv); + + if (bp->phy_flags & PHY_SERDES_FLAG) { + u32 new_local_adv = 0; + u32 new_remote_adv = 0; + + if (local_adv & ADVERTISE_1000XPAUSE) + new_local_adv |= ADVERTISE_PAUSE_CAP; + if (local_adv & ADVERTISE_1000XPSE_ASYM) + new_local_adv |= ADVERTISE_PAUSE_ASYM; + if (remote_adv & ADVERTISE_1000XPAUSE) + new_remote_adv |= ADVERTISE_PAUSE_CAP; + if (remote_adv & ADVERTISE_1000XPSE_ASYM) + new_remote_adv |= ADVERTISE_PAUSE_ASYM; + + local_adv = new_local_adv; + remote_adv = new_remote_adv; + } + + /* See Table 28B-3 of 802.3ab-1999 spec. */ + if (local_adv & ADVERTISE_PAUSE_CAP) { + if(local_adv & ADVERTISE_PAUSE_ASYM) { + if (remote_adv & ADVERTISE_PAUSE_CAP) { + bp->flow_ctrl = FLOW_CTRL_TX | FLOW_CTRL_RX; + } + else if (remote_adv & ADVERTISE_PAUSE_ASYM) { + bp->flow_ctrl = FLOW_CTRL_RX; + } + } + else { + if (remote_adv & ADVERTISE_PAUSE_CAP) { + bp->flow_ctrl = FLOW_CTRL_TX | FLOW_CTRL_RX; + } + } + } + else if (local_adv & ADVERTISE_PAUSE_ASYM) { + if ((remote_adv & ADVERTISE_PAUSE_CAP) && + (remote_adv & ADVERTISE_PAUSE_ASYM)) { + + bp->flow_ctrl = FLOW_CTRL_TX; + } + } +} + +static int +bnx2_serdes_linkup(struct bnx2 *bp) +{ + u32 bmcr, local_adv, remote_adv, common; + + bp->link_up = 1; + bp->line_speed = SPEED_1000; + + bnx2_read_phy(bp, MII_BMCR, &bmcr); + if (bmcr & BMCR_FULLDPLX) { + bp->duplex = DUPLEX_FULL; + } + else { + bp->duplex = DUPLEX_HALF; + } + + if (!(bmcr & BMCR_ANENABLE)) { + return 0; + } + + bnx2_read_phy(bp, MII_ADVERTISE, &local_adv); + bnx2_read_phy(bp, MII_LPA, &remote_adv); + + common = local_adv & remote_adv; + if (common & (ADVERTISE_1000XHALF | ADVERTISE_1000XFULL)) { + + if (common & ADVERTISE_1000XFULL) { + bp->duplex = DUPLEX_FULL; + } + else { + bp->duplex = DUPLEX_HALF; + } + } + + return 0; +} + +static int +bnx2_copper_linkup(struct bnx2 *bp) +{ + u32 bmcr; + + bnx2_read_phy(bp, MII_BMCR, &bmcr); + if (bmcr & BMCR_ANENABLE) { + u32 local_adv, remote_adv, common; + + bnx2_read_phy(bp, MII_CTRL1000, &local_adv); + bnx2_read_phy(bp, MII_STAT1000, &remote_adv); + + common = local_adv & (remote_adv >> 2); + if (common & ADVERTISE_1000FULL) { + bp->line_speed = SPEED_1000; + bp->duplex = DUPLEX_FULL; + } + else if (common & ADVERTISE_1000HALF) { + bp->line_speed = SPEED_1000; + bp->duplex = DUPLEX_HALF; + } + else { + bnx2_read_phy(bp, MII_ADVERTISE, &local_adv); + bnx2_read_phy(bp, MII_LPA, &remote_adv); + + common = local_adv & remote_adv; + if (common & ADVERTISE_100FULL) { + bp->line_speed = SPEED_100; + bp->duplex = DUPLEX_FULL; + } + else if (common & ADVERTISE_100HALF) { + bp->line_speed = SPEED_100; + bp->duplex = DUPLEX_HALF; + } + else if (common & ADVERTISE_10FULL) { + bp->line_speed = SPEED_10; + bp->duplex = DUPLEX_FULL; + } + else if (common & ADVERTISE_10HALF) { + bp->line_speed = SPEED_10; + bp->duplex = DUPLEX_HALF; + } + else { + bp->line_speed = 0; + bp->link_up = 0; + } + } + } + else { + if (bmcr & BMCR_SPEED100) { + bp->line_speed = SPEED_100; + } + else { + bp->line_speed = SPEED_10; + } + if (bmcr & BMCR_FULLDPLX) { + bp->duplex = DUPLEX_FULL; + } + else { + bp->duplex = DUPLEX_HALF; + } + } + + return 0; +} + +static int +bnx2_set_mac_link(struct bnx2 *bp) +{ + u32 val; + + REG_WR(bp, BNX2_EMAC_TX_LENGTHS, 0x2620); + if (bp->link_up && (bp->line_speed == SPEED_1000) && + (bp->duplex == DUPLEX_HALF)) { + REG_WR(bp, BNX2_EMAC_TX_LENGTHS, 0x26ff); + } + + /* Configure the EMAC mode register. */ + val = REG_RD(bp, BNX2_EMAC_MODE); + + val &= ~(BNX2_EMAC_MODE_PORT | BNX2_EMAC_MODE_HALF_DUPLEX | + BNX2_EMAC_MODE_MAC_LOOP | BNX2_EMAC_MODE_FORCE_LINK); + + if (bp->link_up) { + if (bp->line_speed != SPEED_1000) + val |= BNX2_EMAC_MODE_PORT_MII; + else + val |= BNX2_EMAC_MODE_PORT_GMII; + } + else { + val |= BNX2_EMAC_MODE_PORT_GMII; + } + + /* Set the MAC to operate in the appropriate duplex mode. */ + if (bp->duplex == DUPLEX_HALF) + val |= BNX2_EMAC_MODE_HALF_DUPLEX; + REG_WR(bp, BNX2_EMAC_MODE, val); + + /* Enable/disable rx PAUSE. */ + bp->rx_mode &= ~BNX2_EMAC_RX_MODE_FLOW_EN; + + if (bp->flow_ctrl & FLOW_CTRL_RX) + bp->rx_mode |= BNX2_EMAC_RX_MODE_FLOW_EN; + REG_WR(bp, BNX2_EMAC_RX_MODE, bp->rx_mode); + + /* Enable/disable tx PAUSE. */ + val = REG_RD(bp, BNX2_EMAC_TX_MODE); + val &= ~BNX2_EMAC_TX_MODE_FLOW_EN; + + if (bp->flow_ctrl & FLOW_CTRL_TX) + val |= BNX2_EMAC_TX_MODE_FLOW_EN; + REG_WR(bp, BNX2_EMAC_TX_MODE, val); + + /* Acknowledge the interrupt. */ + REG_WR(bp, BNX2_EMAC_STATUS, BNX2_EMAC_STATUS_LINK_CHANGE); + + return 0; +} + +static int +bnx2_set_link(struct bnx2 *bp) +{ + u32 bmsr; + u8 link_up; + + if (bp->loopback == MAC_LOOPBACK) { + bp->link_up = 1; + return 0; + } + + link_up = bp->link_up; + + bnx2_read_phy(bp, MII_BMSR, &bmsr); + bnx2_read_phy(bp, MII_BMSR, &bmsr); + + if ((bp->phy_flags & PHY_SERDES_FLAG) && + (CHIP_NUM(bp) == CHIP_NUM_5706)) { + u32 val; + + val = REG_RD(bp, BNX2_EMAC_STATUS); + if (val & BNX2_EMAC_STATUS_LINK) + bmsr |= BMSR_LSTATUS; + else + bmsr &= ~BMSR_LSTATUS; + } + + if (bmsr & BMSR_LSTATUS) { + bp->link_up = 1; + + if (bp->phy_flags & PHY_SERDES_FLAG) { + bnx2_serdes_linkup(bp); + } + else { + bnx2_copper_linkup(bp); + } + bnx2_resolve_flow_ctrl(bp); + } + else { + if ((bp->phy_flags & PHY_SERDES_FLAG) && + (bp->autoneg & AUTONEG_SPEED)) { + + u32 bmcr; + + bnx2_read_phy(bp, MII_BMCR, &bmcr); + if (!(bmcr & BMCR_ANENABLE)) { + bnx2_write_phy(bp, MII_BMCR, bmcr | + BMCR_ANENABLE); + } + } + bp->phy_flags &= ~PHY_PARALLEL_DETECT_FLAG; + bp->link_up = 0; + } + + if (bp->link_up != link_up) { + bnx2_report_link(bp); + } + + bnx2_set_mac_link(bp); + + return 0; +} + +static int +bnx2_reset_phy(struct bnx2 *bp) +{ + int i; + u32 reg; + + bnx2_write_phy(bp, MII_BMCR, BMCR_RESET); + +#define PHY_RESET_MAX_WAIT 100 + for (i = 0; i < PHY_RESET_MAX_WAIT; i++) { + udelay(10); + + bnx2_read_phy(bp, MII_BMCR, ®); + if (!(reg & BMCR_RESET)) { + udelay(20); + break; + } + } + if (i == PHY_RESET_MAX_WAIT) { + return -EBUSY; + } + return 0; +} + +static u32 +bnx2_phy_get_pause_adv(struct bnx2 *bp) +{ + u32 adv = 0; + + if ((bp->req_flow_ctrl & (FLOW_CTRL_RX | FLOW_CTRL_TX)) == + (FLOW_CTRL_RX | FLOW_CTRL_TX)) { + + if (bp->phy_flags & PHY_SERDES_FLAG) { + adv = ADVERTISE_1000XPAUSE; + } + else { + adv = ADVERTISE_PAUSE_CAP; + } + } + else if (bp->req_flow_ctrl & FLOW_CTRL_TX) { + if (bp->phy_flags & PHY_SERDES_FLAG) { + adv = ADVERTISE_1000XPSE_ASYM; + } + else { + adv = ADVERTISE_PAUSE_ASYM; + } + } + else if (bp->req_flow_ctrl & FLOW_CTRL_RX) { + if (bp->phy_flags & PHY_SERDES_FLAG) { + adv = ADVERTISE_1000XPAUSE | ADVERTISE_1000XPSE_ASYM; + } + else { + adv = ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; + } + } + return adv; +} + +static int +bnx2_setup_serdes_phy(struct bnx2 *bp) +{ + u32 adv, bmcr; + u32 new_adv = 0; + + if (!(bp->autoneg & AUTONEG_SPEED)) { + u32 new_bmcr; + + bnx2_read_phy(bp, MII_BMCR, &bmcr); + new_bmcr = bmcr & ~BMCR_ANENABLE; + new_bmcr |= BMCR_SPEED1000; + if (bp->req_duplex == DUPLEX_FULL) { + new_bmcr |= BMCR_FULLDPLX; + } + else { + new_bmcr &= ~BMCR_FULLDPLX; + } + if (new_bmcr != bmcr) { + /* Force a link down visible on the other side */ + if (bp->link_up) { + bnx2_read_phy(bp, MII_ADVERTISE, &adv); + adv &= ~(ADVERTISE_1000XFULL | + ADVERTISE_1000XHALF); + bnx2_write_phy(bp, MII_ADVERTISE, adv); + bnx2_write_phy(bp, MII_BMCR, bmcr | + BMCR_ANRESTART | BMCR_ANENABLE); + + bp->link_up = 0; + netif_carrier_off(bp->dev); + } + bnx2_write_phy(bp, MII_BMCR, new_bmcr); + } + return 0; + } + + if (bp->advertising & ADVERTISED_1000baseT_Full) + new_adv |= ADVERTISE_1000XFULL; + + new_adv |= bnx2_phy_get_pause_adv(bp); + + bnx2_read_phy(bp, MII_ADVERTISE, &adv); + bnx2_read_phy(bp, MII_BMCR, &bmcr); + + bp->serdes_an_pending = 0; + if ((adv != new_adv) || ((bmcr & BMCR_ANENABLE) == 0)) { + /* Force a link down visible on the other side */ + if (bp->link_up) { + int i; + + bnx2_write_phy(bp, MII_BMCR, BMCR_LOOPBACK); + for (i = 0; i < 110; i++) { + udelay(100); + } + } + + bnx2_write_phy(bp, MII_ADVERTISE, new_adv); + bnx2_write_phy(bp, MII_BMCR, bmcr | BMCR_ANRESTART | + BMCR_ANENABLE); + bp->serdes_an_pending = SERDES_AN_TIMEOUT / bp->timer_interval; + } + + return 0; +} + +#define ETHTOOL_ALL_FIBRE_SPEED \ + (ADVERTISED_1000baseT_Full) + +#define ETHTOOL_ALL_COPPER_SPEED \ + (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | \ + ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full | \ + ADVERTISED_1000baseT_Full) + +#define PHY_ALL_10_100_SPEED (ADVERTISE_10HALF | ADVERTISE_10FULL | \ + ADVERTISE_100HALF | ADVERTISE_100FULL | ADVERTISE_CSMA) + +#define PHY_ALL_1000_SPEED (ADVERTISE_1000HALF | ADVERTISE_1000FULL) + +static int +bnx2_setup_copper_phy(struct bnx2 *bp) +{ + u32 bmcr; + u32 new_bmcr; + + bnx2_read_phy(bp, MII_BMCR, &bmcr); + + if (bp->autoneg & AUTONEG_SPEED) { + u32 adv_reg, adv1000_reg; + u32 new_adv_reg = 0; + u32 new_adv1000_reg = 0; + + bnx2_read_phy(bp, MII_ADVERTISE, &adv_reg); + adv_reg &= (PHY_ALL_10_100_SPEED | ADVERTISE_PAUSE_CAP | + ADVERTISE_PAUSE_ASYM); + + bnx2_read_phy(bp, MII_CTRL1000, &adv1000_reg); + adv1000_reg &= PHY_ALL_1000_SPEED; + + if (bp->advertising & ADVERTISED_10baseT_Half) + new_adv_reg |= ADVERTISE_10HALF; + if (bp->advertising & ADVERTISED_10baseT_Full) + new_adv_reg |= ADVERTISE_10FULL; + if (bp->advertising & ADVERTISED_100baseT_Half) + new_adv_reg |= ADVERTISE_100HALF; + if (bp->advertising & ADVERTISED_100baseT_Full) + new_adv_reg |= ADVERTISE_100FULL; + if (bp->advertising & ADVERTISED_1000baseT_Full) + new_adv1000_reg |= ADVERTISE_1000FULL; + + new_adv_reg |= ADVERTISE_CSMA; + + new_adv_reg |= bnx2_phy_get_pause_adv(bp); + + if ((adv1000_reg != new_adv1000_reg) || + (adv_reg != new_adv_reg) || + ((bmcr & BMCR_ANENABLE) == 0)) { + + bnx2_write_phy(bp, MII_ADVERTISE, new_adv_reg); + bnx2_write_phy(bp, MII_CTRL1000, new_adv1000_reg); + bnx2_write_phy(bp, MII_BMCR, BMCR_ANRESTART | + BMCR_ANENABLE); + } + else if (bp->link_up) { + /* Flow ctrl may have changed from auto to forced */ + /* or vice-versa. */ + + bnx2_resolve_flow_ctrl(bp); + bnx2_set_mac_link(bp); + } + return 0; + } + + new_bmcr = 0; + if (bp->req_line_speed == SPEED_100) { + new_bmcr |= BMCR_SPEED100; + } + if (bp->req_duplex == DUPLEX_FULL) { + new_bmcr |= BMCR_FULLDPLX; + } + if (new_bmcr != bmcr) { + u32 bmsr; + int i = 0; + + bnx2_read_phy(bp, MII_BMSR, &bmsr); + bnx2_read_phy(bp, MII_BMSR, &bmsr); + + if (bmsr & BMSR_LSTATUS) { + /* Force link down */ + bnx2_write_phy(bp, MII_BMCR, BMCR_LOOPBACK); + do { + udelay(100); + bnx2_read_phy(bp, MII_BMSR, &bmsr); + bnx2_read_phy(bp, MII_BMSR, &bmsr); + i++; + } while ((bmsr & BMSR_LSTATUS) && (i < 620)); + } + + bnx2_write_phy(bp, MII_BMCR, new_bmcr); + + /* Normally, the new speed is setup after the link has + * gone down and up again. In some cases, link will not go + * down so we need to set up the new speed here. + */ + if (bmsr & BMSR_LSTATUS) { + bp->line_speed = bp->req_line_speed; + bp->duplex = bp->req_duplex; + bnx2_resolve_flow_ctrl(bp); + bnx2_set_mac_link(bp); + } + } + return 0; +} + +static int +bnx2_setup_phy(struct bnx2 *bp) +{ + if (bp->loopback == MAC_LOOPBACK) + return 0; + + if (bp->phy_flags & PHY_SERDES_FLAG) { + return (bnx2_setup_serdes_phy(bp)); + } + else { + return (bnx2_setup_copper_phy(bp)); + } +} + +static int +bnx2_init_serdes_phy(struct bnx2 *bp) +{ + bp->phy_flags &= ~PHY_PARALLEL_DETECT_FLAG; + + if (CHIP_NUM(bp) == CHIP_NUM_5706) { + REG_WR(bp, BNX2_MISC_UNUSED0, 0x300); + } + + if (bp->dev->mtu > 1500) { + u32 val; + + /* Set extended packet length bit */ + bnx2_write_phy(bp, 0x18, 0x7); + bnx2_read_phy(bp, 0x18, &val); + bnx2_write_phy(bp, 0x18, (val & 0xfff8) | 0x4000); + + bnx2_write_phy(bp, 0x1c, 0x6c00); + bnx2_read_phy(bp, 0x1c, &val); + bnx2_write_phy(bp, 0x1c, (val & 0x3ff) | 0xec02); + } + else { + u32 val; + + bnx2_write_phy(bp, 0x18, 0x7); + bnx2_read_phy(bp, 0x18, &val); + bnx2_write_phy(bp, 0x18, val & ~0x4007); + + bnx2_write_phy(bp, 0x1c, 0x6c00); + bnx2_read_phy(bp, 0x1c, &val); + bnx2_write_phy(bp, 0x1c, (val & 0x3fd) | 0xec00); + } + + return 0; +} + +static int +bnx2_init_copper_phy(struct bnx2 *bp) +{ + bp->phy_flags |= PHY_CRC_FIX_FLAG; + + if (bp->phy_flags & PHY_CRC_FIX_FLAG) { + bnx2_write_phy(bp, 0x18, 0x0c00); + bnx2_write_phy(bp, 0x17, 0x000a); + bnx2_write_phy(bp, 0x15, 0x310b); + bnx2_write_phy(bp, 0x17, 0x201f); + bnx2_write_phy(bp, 0x15, 0x9506); + bnx2_write_phy(bp, 0x17, 0x401f); + bnx2_write_phy(bp, 0x15, 0x14e2); + bnx2_write_phy(bp, 0x18, 0x0400); + } + + if (bp->dev->mtu > 1500) { + u32 val; + + /* Set extended packet length bit */ + bnx2_write_phy(bp, 0x18, 0x7); + bnx2_read_phy(bp, 0x18, &val); + bnx2_write_phy(bp, 0x18, val | 0x4000); + + bnx2_read_phy(bp, 0x10, &val); + bnx2_write_phy(bp, 0x10, val | 0x1); + } + else { + u32 val; + + bnx2_write_phy(bp, 0x18, 0x7); + bnx2_read_phy(bp, 0x18, &val); + bnx2_write_phy(bp, 0x18, val & ~0x4007); + + bnx2_read_phy(bp, 0x10, &val); + bnx2_write_phy(bp, 0x10, val & ~0x1); + } + + return 0; +} + + +static int +bnx2_init_phy(struct bnx2 *bp) +{ + u32 val; + int rc = 0; + + bp->phy_flags &= ~PHY_INT_MODE_MASK_FLAG; + bp->phy_flags |= PHY_INT_MODE_LINK_READY_FLAG; + + REG_WR(bp, BNX2_EMAC_ATTENTION_ENA, BNX2_EMAC_ATTENTION_ENA_LINK); + + bnx2_reset_phy(bp); + + bnx2_read_phy(bp, MII_PHYSID1, &val); + bp->phy_id = val << 16; + bnx2_read_phy(bp, MII_PHYSID2, &val); + bp->phy_id |= val & 0xffff; + + if (bp->phy_flags & PHY_SERDES_FLAG) { + rc = bnx2_init_serdes_phy(bp); + } + else { + rc = bnx2_init_copper_phy(bp); + } + + bnx2_setup_phy(bp); + + return rc; +} + +static int +bnx2_set_mac_loopback(struct bnx2 *bp) +{ + u32 mac_mode; + + mac_mode = REG_RD(bp, BNX2_EMAC_MODE); + mac_mode &= ~BNX2_EMAC_MODE_PORT; + mac_mode |= BNX2_EMAC_MODE_MAC_LOOP | BNX2_EMAC_MODE_FORCE_LINK; + REG_WR(bp, BNX2_EMAC_MODE, mac_mode); + bp->link_up = 1; + return 0; +} + +static int +bnx2_fw_sync(struct bnx2 *bp, u32 msg_data) +{ + int i; + u32 val; + + if (bp->fw_timed_out) + return -EBUSY; + + bp->fw_wr_seq++; + msg_data |= bp->fw_wr_seq; + + REG_WR_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_DRV_MB, msg_data); + + /* wait for an acknowledgement. */ + for (i = 0; i < (FW_ACK_TIME_OUT_MS * 1000)/5; i++) { + udelay(5); + + val = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_FW_MB); + + if ((val & BNX2_FW_MSG_ACK) == (msg_data & BNX2_DRV_MSG_SEQ)) + break; + } + + /* If we timed out, inform the firmware that this is the case. */ + if (((val & BNX2_FW_MSG_ACK) != (msg_data & BNX2_DRV_MSG_SEQ)) && + ((msg_data & BNX2_DRV_MSG_DATA) != BNX2_DRV_MSG_DATA_WAIT0)) { + + msg_data &= ~BNX2_DRV_MSG_CODE; + msg_data |= BNX2_DRV_MSG_CODE_FW_TIMEOUT; + + REG_WR_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_DRV_MB, msg_data); + + bp->fw_timed_out = 1; + + return -EBUSY; + } + + return 0; +} + +static void +bnx2_init_context(struct bnx2 *bp) +{ + u32 vcid; + + vcid = 96; + while (vcid) { + u32 vcid_addr, pcid_addr, offset; + + vcid--; + + if (CHIP_ID(bp) == CHIP_ID_5706_A0) { + u32 new_vcid; + + vcid_addr = GET_PCID_ADDR(vcid); + if (vcid & 0x8) { + new_vcid = 0x60 + (vcid & 0xf0) + (vcid & 0x7); + } + else { + new_vcid = vcid; + } + pcid_addr = GET_PCID_ADDR(new_vcid); + } + else { + vcid_addr = GET_CID_ADDR(vcid); + pcid_addr = vcid_addr; + } + + REG_WR(bp, BNX2_CTX_VIRT_ADDR, 0x00); + REG_WR(bp, BNX2_CTX_PAGE_TBL, pcid_addr); + + /* Zero out the context. */ + for (offset = 0; offset < PHY_CTX_SIZE; offset += 4) { + CTX_WR(bp, 0x00, offset, 0); + } + + REG_WR(bp, BNX2_CTX_VIRT_ADDR, vcid_addr); + REG_WR(bp, BNX2_CTX_PAGE_TBL, pcid_addr); + } +} + +static int +bnx2_alloc_bad_rbuf(struct bnx2 *bp) +{ + u16 *good_mbuf; + u32 good_mbuf_cnt; + u32 val; + + good_mbuf = kmalloc(512 * sizeof(u16), GFP_KERNEL); + if (good_mbuf == NULL) { + printk(KERN_ERR PFX "Failed to allocate memory in " + "bnx2_alloc_bad_rbuf\n"); + return -ENOMEM; + } + + REG_WR(bp, BNX2_MISC_ENABLE_SET_BITS, + BNX2_MISC_ENABLE_SET_BITS_RX_MBUF_ENABLE); + + good_mbuf_cnt = 0; + + /* Allocate a bunch of mbufs and save the good ones in an array. */ + val = REG_RD_IND(bp, BNX2_RBUF_STATUS1); + while (val & BNX2_RBUF_STATUS1_FREE_COUNT) { + REG_WR_IND(bp, BNX2_RBUF_COMMAND, BNX2_RBUF_COMMAND_ALLOC_REQ); + + val = REG_RD_IND(bp, BNX2_RBUF_FW_BUF_ALLOC); + + val &= BNX2_RBUF_FW_BUF_ALLOC_VALUE; + + /* The addresses with Bit 9 set are bad memory blocks. */ + if (!(val & (1 << 9))) { + good_mbuf[good_mbuf_cnt] = (u16) val; + good_mbuf_cnt++; + } + + val = REG_RD_IND(bp, BNX2_RBUF_STATUS1); + } + + /* Free the good ones back to the mbuf pool thus discarding + * all the bad ones. */ + while (good_mbuf_cnt) { + good_mbuf_cnt--; + + val = good_mbuf[good_mbuf_cnt]; + val = (val << 9) | val | 1; + + REG_WR_IND(bp, BNX2_RBUF_FW_BUF_FREE, val); + } + kfree(good_mbuf); + return 0; +} + +static void +bnx2_set_mac_addr(struct bnx2 *bp) +{ + u32 val; + u8 *mac_addr = bp->dev->dev_addr; + + val = (mac_addr[0] << 8) | mac_addr[1]; + + REG_WR(bp, BNX2_EMAC_MAC_MATCH0, val); + + val = (mac_addr[2] << 24) | (mac_addr[3] << 16) | + (mac_addr[4] << 8) | mac_addr[5]; + + REG_WR(bp, BNX2_EMAC_MAC_MATCH1, val); +} + +static inline int +bnx2_alloc_rx_skb(struct bnx2 *bp, u16 index) +{ + struct sk_buff *skb; + struct sw_bd *rx_buf = &bp->rx_buf_ring[index]; + dma_addr_t mapping; + struct rx_bd *rxbd = &bp->rx_desc_ring[index]; + unsigned long align; + + skb = dev_alloc_skb(bp->rx_buf_size); + if (skb == NULL) { + return -ENOMEM; + } + + if (unlikely((align = (unsigned long) skb->data & 0x7))) { + skb_reserve(skb, 8 - align); + } + + skb->dev = bp->dev; + mapping = pci_map_single(bp->pdev, skb->data, bp->rx_buf_use_size, + PCI_DMA_FROMDEVICE); + + rx_buf->skb = skb; + pci_unmap_addr_set(rx_buf, mapping, mapping); + + rxbd->rx_bd_haddr_hi = (u64) mapping >> 32; + rxbd->rx_bd_haddr_lo = (u64) mapping & 0xffffffff; + + bp->rx_prod_bseq += bp->rx_buf_use_size; + + return 0; +} + +static void +bnx2_phy_int(struct bnx2 *bp) +{ + u32 new_link_state, old_link_state; + + new_link_state = bp->status_blk->status_attn_bits & + STATUS_ATTN_BITS_LINK_STATE; + old_link_state = bp->status_blk->status_attn_bits_ack & + STATUS_ATTN_BITS_LINK_STATE; + if (new_link_state != old_link_state) { + if (new_link_state) { + REG_WR(bp, BNX2_PCICFG_STATUS_BIT_SET_CMD, + STATUS_ATTN_BITS_LINK_STATE); + } + else { + REG_WR(bp, BNX2_PCICFG_STATUS_BIT_CLEAR_CMD, + STATUS_ATTN_BITS_LINK_STATE); + } + bnx2_set_link(bp); + } +} + +static void +bnx2_tx_int(struct bnx2 *bp) +{ + u16 hw_cons, sw_cons, sw_ring_cons; + int tx_free_bd = 0; + + hw_cons = bp->status_blk->status_tx_quick_consumer_index0; + if ((hw_cons & MAX_TX_DESC_CNT) == MAX_TX_DESC_CNT) { + hw_cons++; + } + sw_cons = bp->tx_cons; + + while (sw_cons != hw_cons) { + struct sw_bd *tx_buf; + struct sk_buff *skb; + int i, last; + + sw_ring_cons = TX_RING_IDX(sw_cons); + + tx_buf = &bp->tx_buf_ring[sw_ring_cons]; + skb = tx_buf->skb; +#ifdef BCM_TSO + /* partial BD completions possible with TSO packets */ + if (skb_shinfo(skb)->tso_size) { + u16 last_idx, last_ring_idx; + + last_idx = sw_cons + + skb_shinfo(skb)->nr_frags + 1; + last_ring_idx = sw_ring_cons + + skb_shinfo(skb)->nr_frags + 1; + if (unlikely(last_ring_idx >= MAX_TX_DESC_CNT)) { + last_idx++; + } + if (((s16) ((s16) last_idx - (s16) hw_cons)) > 0) { + break; + } + } +#endif + pci_unmap_single(bp->pdev, pci_unmap_addr(tx_buf, mapping), + skb_headlen(skb), PCI_DMA_TODEVICE); + + tx_buf->skb = NULL; + last = skb_shinfo(skb)->nr_frags; + + for (i = 0; i < last; i++) { + sw_cons = NEXT_TX_BD(sw_cons); + + pci_unmap_page(bp->pdev, + pci_unmap_addr( + &bp->tx_buf_ring[TX_RING_IDX(sw_cons)], + mapping), + skb_shinfo(skb)->frags[i].size, + PCI_DMA_TODEVICE); + } + + sw_cons = NEXT_TX_BD(sw_cons); + + tx_free_bd += last + 1; + + dev_kfree_skb_irq(skb); + + hw_cons = bp->status_blk->status_tx_quick_consumer_index0; + if ((hw_cons & MAX_TX_DESC_CNT) == MAX_TX_DESC_CNT) { + hw_cons++; + } + } + + atomic_add(tx_free_bd, &bp->tx_avail_bd); + + if (unlikely(netif_queue_stopped(bp->dev))) { + unsigned long flags; + + spin_lock_irqsave(&bp->tx_lock, flags); + if ((netif_queue_stopped(bp->dev)) && + (atomic_read(&bp->tx_avail_bd) > MAX_SKB_FRAGS)) { + + netif_wake_queue(bp->dev); + } + spin_unlock_irqrestore(&bp->tx_lock, flags); + } + + bp->tx_cons = sw_cons; + +} + +static inline void +bnx2_reuse_rx_skb(struct bnx2 *bp, struct sk_buff *skb, + u16 cons, u16 prod) +{ + struct sw_bd *cons_rx_buf = &bp->rx_buf_ring[cons]; + struct sw_bd *prod_rx_buf = &bp->rx_buf_ring[prod]; + struct rx_bd *cons_bd = &bp->rx_desc_ring[cons]; + struct rx_bd *prod_bd = &bp->rx_desc_ring[prod]; + + pci_dma_sync_single_for_device(bp->pdev, + pci_unmap_addr(cons_rx_buf, mapping), + bp->rx_offset + RX_COPY_THRESH, PCI_DMA_FROMDEVICE); + + prod_rx_buf->skb = cons_rx_buf->skb; + pci_unmap_addr_set(prod_rx_buf, mapping, + pci_unmap_addr(cons_rx_buf, mapping)); + + memcpy(prod_bd, cons_bd, 8); + + bp->rx_prod_bseq += bp->rx_buf_use_size; + +} + +static int +bnx2_rx_int(struct bnx2 *bp, int budget) +{ + u16 hw_cons, sw_cons, sw_ring_cons, sw_prod, sw_ring_prod; + struct l2_fhdr *rx_hdr; + int rx_pkt = 0; + + hw_cons = bp->status_blk->status_rx_quick_consumer_index0; + if ((hw_cons & MAX_RX_DESC_CNT) == MAX_RX_DESC_CNT) { + hw_cons++; + } + sw_cons = bp->rx_cons; + sw_prod = bp->rx_prod; + + /* Memory barrier necessary as speculative reads of the rx + * buffer can be ahead of the index in the status block + */ + rmb(); + while (sw_cons != hw_cons) { + unsigned int len; + u16 status; + struct sw_bd *rx_buf; + struct sk_buff *skb; + + sw_ring_cons = RX_RING_IDX(sw_cons); + sw_ring_prod = RX_RING_IDX(sw_prod); + + rx_buf = &bp->rx_buf_ring[sw_ring_cons]; + skb = rx_buf->skb; + pci_dma_sync_single_for_cpu(bp->pdev, + pci_unmap_addr(rx_buf, mapping), + bp->rx_offset + RX_COPY_THRESH, PCI_DMA_FROMDEVICE); + + rx_hdr = (struct l2_fhdr *) skb->data; + len = rx_hdr->l2_fhdr_pkt_len - 4; + + if (rx_hdr->l2_fhdr_errors & + (L2_FHDR_ERRORS_BAD_CRC | + L2_FHDR_ERRORS_PHY_DECODE | + L2_FHDR_ERRORS_ALIGNMENT | + L2_FHDR_ERRORS_TOO_SHORT | + L2_FHDR_ERRORS_GIANT_FRAME)) { + + goto reuse_rx; + } + + /* Since we don't have a jumbo ring, copy small packets + * if mtu > 1500 + */ + if ((bp->dev->mtu > 1500) && (len <= RX_COPY_THRESH)) { + struct sk_buff *new_skb; + + new_skb = dev_alloc_skb(len + 2); + if (new_skb == NULL) + goto reuse_rx; + + /* aligned copy */ + memcpy(new_skb->data, + skb->data + bp->rx_offset - 2, + len + 2); + + skb_reserve(new_skb, 2); + skb_put(new_skb, len); + new_skb->dev = bp->dev; + + bnx2_reuse_rx_skb(bp, skb, + sw_ring_cons, sw_ring_prod); + + skb = new_skb; + } + else if (bnx2_alloc_rx_skb(bp, sw_ring_prod) == 0) { + pci_unmap_single(bp->pdev, + pci_unmap_addr(rx_buf, mapping), + bp->rx_buf_use_size, PCI_DMA_FROMDEVICE); + + skb_reserve(skb, bp->rx_offset); + skb_put(skb, len); + } + else { +reuse_rx: + bnx2_reuse_rx_skb(bp, skb, + sw_ring_cons, sw_ring_prod); + goto next_rx; + } + + skb->protocol = eth_type_trans(skb, bp->dev); + + if ((len > (bp->dev->mtu + ETH_HLEN)) && + (htons(skb->protocol) != 0x8100)) { + + dev_kfree_skb_irq(skb); + goto next_rx; + + } + + status = rx_hdr->l2_fhdr_status; + skb->ip_summed = CHECKSUM_NONE; + if (bp->rx_csum && + (status & (L2_FHDR_STATUS_TCP_SEGMENT | + L2_FHDR_STATUS_UDP_DATAGRAM))) { + + u16 cksum = rx_hdr->l2_fhdr_tcp_udp_xsum; + + if (cksum == 0xffff) + skb->ip_summed = CHECKSUM_UNNECESSARY; + } + +#ifdef BCM_VLAN + if ((status & L2_FHDR_STATUS_L2_VLAN_TAG) && (bp->vlgrp != 0)) { + vlan_hwaccel_receive_skb(skb, bp->vlgrp, + rx_hdr->l2_fhdr_vlan_tag); + } + else +#endif + netif_receive_skb(skb); + + bp->dev->last_rx = jiffies; + rx_pkt++; + +next_rx: + rx_buf->skb = NULL; + + sw_cons = NEXT_RX_BD(sw_cons); + sw_prod = NEXT_RX_BD(sw_prod); + + if ((rx_pkt == budget)) + break; + } + bp->rx_cons = sw_cons; + bp->rx_prod = sw_prod; + + REG_WR16(bp, MB_RX_CID_ADDR + BNX2_L2CTX_HOST_BDIDX, sw_prod); + + REG_WR(bp, MB_RX_CID_ADDR + BNX2_L2CTX_HOST_BSEQ, bp->rx_prod_bseq); + + mmiowb(); + + return rx_pkt; + +} + +/* MSI ISR - The only difference between this and the INTx ISR + * is that the MSI interrupt is always serviced. + */ +static irqreturn_t +bnx2_msi(int irq, void *dev_instance, struct pt_regs *regs) +{ + struct net_device *dev = dev_instance; + struct bnx2 *bp = dev->priv; + + REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD, + BNX2_PCICFG_INT_ACK_CMD_USE_INT_HC_PARAM | + BNX2_PCICFG_INT_ACK_CMD_MASK_INT); + + /* Return here if interrupt is disabled. */ + if (unlikely(atomic_read(&bp->intr_sem) != 0)) { + return IRQ_RETVAL(1); + } + + if (netif_rx_schedule_prep(dev)) { + __netif_rx_schedule(dev); + } + + return IRQ_RETVAL(1); +} + +static irqreturn_t +bnx2_interrupt(int irq, void *dev_instance, struct pt_regs *regs) +{ + struct net_device *dev = dev_instance; + struct bnx2 *bp = dev->priv; + + /* When using INTx, it is possible for the interrupt to arrive + * at the CPU before the status block posted prior to the + * interrupt. Reading a register will flush the status block. + * When using MSI, the MSI message will always complete after + * the status block write. + */ + if ((bp->status_blk->status_idx == bp->last_status_idx) || + (REG_RD(bp, BNX2_PCICFG_MISC_STATUS) & + BNX2_PCICFG_MISC_STATUS_INTA_VALUE)) + return IRQ_RETVAL(0); + + REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD, + BNX2_PCICFG_INT_ACK_CMD_USE_INT_HC_PARAM | + BNX2_PCICFG_INT_ACK_CMD_MASK_INT); + + /* Return here if interrupt is shared and is disabled. */ + if (unlikely(atomic_read(&bp->intr_sem) != 0)) { + return IRQ_RETVAL(1); + } + + if (netif_rx_schedule_prep(dev)) { + __netif_rx_schedule(dev); + } + + return IRQ_RETVAL(1); +} + +static int +bnx2_poll(struct net_device *dev, int *budget) +{ + struct bnx2 *bp = dev->priv; + int rx_done = 1; + + bp->last_status_idx = bp->status_blk->status_idx; + + rmb(); + if ((bp->status_blk->status_attn_bits & + STATUS_ATTN_BITS_LINK_STATE) != + (bp->status_blk->status_attn_bits_ack & + STATUS_ATTN_BITS_LINK_STATE)) { + + unsigned long flags; + + spin_lock_irqsave(&bp->phy_lock, flags); + bnx2_phy_int(bp); + spin_unlock_irqrestore(&bp->phy_lock, flags); + } + + if (bp->status_blk->status_tx_quick_consumer_index0 != bp->tx_cons) { + bnx2_tx_int(bp); + } + + if (bp->status_blk->status_rx_quick_consumer_index0 != bp->rx_cons) { + int orig_budget = *budget; + int work_done; + + if (orig_budget > dev->quota) + orig_budget = dev->quota; + + work_done = bnx2_rx_int(bp, orig_budget); + *budget -= work_done; + dev->quota -= work_done; + + if (work_done >= orig_budget) { + rx_done = 0; + } + } + + if (rx_done) { + netif_rx_complete(dev); + REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD, + BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID | + bp->last_status_idx); + return 0; + } + + return 1; +} + +/* Called with rtnl_lock from vlan functions and also dev->xmit_lock + * from set_multicast. + */ +static void +bnx2_set_rx_mode(struct net_device *dev) +{ + struct bnx2 *bp = dev->priv; + u32 rx_mode, sort_mode; + int i; + unsigned long flags; + + spin_lock_irqsave(&bp->phy_lock, flags); + + rx_mode = bp->rx_mode & ~(BNX2_EMAC_RX_MODE_PROMISCUOUS | + BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG); + sort_mode = 1 | BNX2_RPM_SORT_USER0_BC_EN; +#ifdef BCM_VLAN + if (!bp->vlgrp) { + rx_mode |= BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG; + } +#else + rx_mode |= BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG; +#endif + if (dev->flags & IFF_PROMISC) { + /* Promiscuous mode. */ + rx_mode |= BNX2_EMAC_RX_MODE_PROMISCUOUS; + sort_mode |= BNX2_RPM_SORT_USER0_PROM_EN; + } + else if (dev->flags & IFF_ALLMULTI) { + for (i = 0; i < NUM_MC_HASH_REGISTERS; i++) { + REG_WR(bp, BNX2_EMAC_MULTICAST_HASH0 + (i * 4), + 0xffffffff); + } + sort_mode |= BNX2_RPM_SORT_USER0_MC_EN; + } + else { + /* Accept one or more multicast(s). */ + struct dev_mc_list *mclist; + u32 mc_filter[NUM_MC_HASH_REGISTERS]; + u32 regidx; + u32 bit; + u32 crc; + + memset(mc_filter, 0, 4 * NUM_MC_HASH_REGISTERS); + + for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; + i++, mclist = mclist->next) { + + crc = ether_crc_le(ETH_ALEN, mclist->dmi_addr); + bit = crc & 0xff; + regidx = (bit & 0xe0) >> 5; + bit &= 0x1f; + mc_filter[regidx] |= (1 << bit); + } + + for (i = 0; i < NUM_MC_HASH_REGISTERS; i++) { + REG_WR(bp, BNX2_EMAC_MULTICAST_HASH0 + (i * 4), + mc_filter[i]); + } + + sort_mode |= BNX2_RPM_SORT_USER0_MC_HSH_EN; + } + + if (rx_mode != bp->rx_mode) { + bp->rx_mode = rx_mode; + REG_WR(bp, BNX2_EMAC_RX_MODE, rx_mode); + } + + REG_WR(bp, BNX2_RPM_SORT_USER0, 0x0); + REG_WR(bp, BNX2_RPM_SORT_USER0, sort_mode); + REG_WR(bp, BNX2_RPM_SORT_USER0, sort_mode | BNX2_RPM_SORT_USER0_ENA); + + spin_unlock_irqrestore(&bp->phy_lock, flags); +} + +static void +load_rv2p_fw(struct bnx2 *bp, u32 *rv2p_code, u32 rv2p_code_len, + u32 rv2p_proc) +{ + int i; + u32 val; + + + for (i = 0; i < rv2p_code_len; i += 8) { + REG_WR(bp, BNX2_RV2P_INSTR_HIGH, *rv2p_code); + rv2p_code++; + REG_WR(bp, BNX2_RV2P_INSTR_LOW, *rv2p_code); + rv2p_code++; + + if (rv2p_proc == RV2P_PROC1) { + val = (i / 8) | BNX2_RV2P_PROC1_ADDR_CMD_RDWR; + REG_WR(bp, BNX2_RV2P_PROC1_ADDR_CMD, val); + } + else { + val = (i / 8) | BNX2_RV2P_PROC2_ADDR_CMD_RDWR; + REG_WR(bp, BNX2_RV2P_PROC2_ADDR_CMD, val); + } + } + + /* Reset the processor, un-stall is done later. */ + if (rv2p_proc == RV2P_PROC1) { + REG_WR(bp, BNX2_RV2P_COMMAND, BNX2_RV2P_COMMAND_PROC1_RESET); + } + else { + REG_WR(bp, BNX2_RV2P_COMMAND, BNX2_RV2P_COMMAND_PROC2_RESET); + } +} + +static void +load_cpu_fw(struct bnx2 *bp, struct cpu_reg *cpu_reg, struct fw_info *fw) +{ + u32 offset; + u32 val; + + /* Halt the CPU. */ + val = REG_RD_IND(bp, cpu_reg->mode); + val |= cpu_reg->mode_value_halt; + REG_WR_IND(bp, cpu_reg->mode, val); + REG_WR_IND(bp, cpu_reg->state, cpu_reg->state_value_clear); + + /* Load the Text area. */ + offset = cpu_reg->spad_base + (fw->text_addr - cpu_reg->mips_view_base); + if (fw->text) { + int j; + + for (j = 0; j < (fw->text_len / 4); j++, offset += 4) { + REG_WR_IND(bp, offset, fw->text[j]); + } + } + + /* Load the Data area. */ + offset = cpu_reg->spad_base + (fw->data_addr - cpu_reg->mips_view_base); + if (fw->data) { + int j; + + for (j = 0; j < (fw->data_len / 4); j++, offset += 4) { + REG_WR_IND(bp, offset, fw->data[j]); + } + } + + /* Load the SBSS area. */ + offset = cpu_reg->spad_base + (fw->sbss_addr - cpu_reg->mips_view_base); + if (fw->sbss) { + int j; + + for (j = 0; j < (fw->sbss_len / 4); j++, offset += 4) { + REG_WR_IND(bp, offset, fw->sbss[j]); + } + } + + /* Load the BSS area. */ + offset = cpu_reg->spad_base + (fw->bss_addr - cpu_reg->mips_view_base); + if (fw->bss) { + int j; + + for (j = 0; j < (fw->bss_len/4); j++, offset += 4) { + REG_WR_IND(bp, offset, fw->bss[j]); + } + } + + /* Load the Read-Only area. */ + offset = cpu_reg->spad_base + + (fw->rodata_addr - cpu_reg->mips_view_base); + if (fw->rodata) { + int j; + + for (j = 0; j < (fw->rodata_len / 4); j++, offset += 4) { + REG_WR_IND(bp, offset, fw->rodata[j]); + } + } + + /* Clear the pre-fetch instruction. */ + REG_WR_IND(bp, cpu_reg->inst, 0); + REG_WR_IND(bp, cpu_reg->pc, fw->start_addr); + + /* Start the CPU. */ + val = REG_RD_IND(bp, cpu_reg->mode); + val &= ~cpu_reg->mode_value_halt; + REG_WR_IND(bp, cpu_reg->state, cpu_reg->state_value_clear); + REG_WR_IND(bp, cpu_reg->mode, val); +} + +static void +bnx2_init_cpus(struct bnx2 *bp) +{ + struct cpu_reg cpu_reg; + struct fw_info fw; + + /* Initialize the RV2P processor. */ + load_rv2p_fw(bp, bnx2_rv2p_proc1, sizeof(bnx2_rv2p_proc1), RV2P_PROC1); + load_rv2p_fw(bp, bnx2_rv2p_proc2, sizeof(bnx2_rv2p_proc2), RV2P_PROC2); + + /* Initialize the RX Processor. */ + cpu_reg.mode = BNX2_RXP_CPU_MODE; + cpu_reg.mode_value_halt = BNX2_RXP_CPU_MODE_SOFT_HALT; + cpu_reg.mode_value_sstep = BNX2_RXP_CPU_MODE_STEP_ENA; + cpu_reg.state = BNX2_RXP_CPU_STATE; + cpu_reg.state_value_clear = 0xffffff; + cpu_reg.gpr0 = BNX2_RXP_CPU_REG_FILE; + cpu_reg.evmask = BNX2_RXP_CPU_EVENT_MASK; + cpu_reg.pc = BNX2_RXP_CPU_PROGRAM_COUNTER; + cpu_reg.inst = BNX2_RXP_CPU_INSTRUCTION; + cpu_reg.bp = BNX2_RXP_CPU_HW_BREAKPOINT; + cpu_reg.spad_base = BNX2_RXP_SCRATCH; + cpu_reg.mips_view_base = 0x8000000; + + fw.ver_major = bnx2_RXP_b06FwReleaseMajor; + fw.ver_minor = bnx2_RXP_b06FwReleaseMinor; + fw.ver_fix = bnx2_RXP_b06FwReleaseFix; + fw.start_addr = bnx2_RXP_b06FwStartAddr; + + fw.text_addr = bnx2_RXP_b06FwTextAddr; + fw.text_len = bnx2_RXP_b06FwTextLen; + fw.text_index = 0; + fw.text = bnx2_RXP_b06FwText; + + fw.data_addr = bnx2_RXP_b06FwDataAddr; + fw.data_len = bnx2_RXP_b06FwDataLen; + fw.data_index = 0; + fw.data = bnx2_RXP_b06FwData; + + fw.sbss_addr = bnx2_RXP_b06FwSbssAddr; + fw.sbss_len = bnx2_RXP_b06FwSbssLen; + fw.sbss_index = 0; + fw.sbss = bnx2_RXP_b06FwSbss; + + fw.bss_addr = bnx2_RXP_b06FwBssAddr; + fw.bss_len = bnx2_RXP_b06FwBssLen; + fw.bss_index = 0; + fw.bss = bnx2_RXP_b06FwBss; + + fw.rodata_addr = bnx2_RXP_b06FwRodataAddr; + fw.rodata_len = bnx2_RXP_b06FwRodataLen; + fw.rodata_index = 0; + fw.rodata = bnx2_RXP_b06FwRodata; + + load_cpu_fw(bp, &cpu_reg, &fw); + + /* Initialize the TX Processor. */ + cpu_reg.mode = BNX2_TXP_CPU_MODE; + cpu_reg.mode_value_halt = BNX2_TXP_CPU_MODE_SOFT_HALT; + cpu_reg.mode_value_sstep = BNX2_TXP_CPU_MODE_STEP_ENA; + cpu_reg.state = BNX2_TXP_CPU_STATE; + cpu_reg.state_value_clear = 0xffffff; + cpu_reg.gpr0 = BNX2_TXP_CPU_REG_FILE; + cpu_reg.evmask = BNX2_TXP_CPU_EVENT_MASK; + cpu_reg.pc = BNX2_TXP_CPU_PROGRAM_COUNTER; + cpu_reg.inst = BNX2_TXP_CPU_INSTRUCTION; + cpu_reg.bp = BNX2_TXP_CPU_HW_BREAKPOINT; + cpu_reg.spad_base = BNX2_TXP_SCRATCH; + cpu_reg.mips_view_base = 0x8000000; + + fw.ver_major = bnx2_TXP_b06FwReleaseMajor; + fw.ver_minor = bnx2_TXP_b06FwReleaseMinor; + fw.ver_fix = bnx2_TXP_b06FwReleaseFix; + fw.start_addr = bnx2_TXP_b06FwStartAddr; + + fw.text_addr = bnx2_TXP_b06FwTextAddr; + fw.text_len = bnx2_TXP_b06FwTextLen; + fw.text_index = 0; + fw.text = bnx2_TXP_b06FwText; + + fw.data_addr = bnx2_TXP_b06FwDataAddr; + fw.data_len = bnx2_TXP_b06FwDataLen; + fw.data_index = 0; + fw.data = bnx2_TXP_b06FwData; + + fw.sbss_addr = bnx2_TXP_b06FwSbssAddr; + fw.sbss_len = bnx2_TXP_b06FwSbssLen; + fw.sbss_index = 0; + fw.sbss = bnx2_TXP_b06FwSbss; + + fw.bss_addr = bnx2_TXP_b06FwBssAddr; + fw.bss_len = bnx2_TXP_b06FwBssLen; + fw.bss_index = 0; + fw.bss = bnx2_TXP_b06FwBss; + + fw.rodata_addr = bnx2_TXP_b06FwRodataAddr; + fw.rodata_len = bnx2_TXP_b06FwRodataLen; + fw.rodata_index = 0; + fw.rodata = bnx2_TXP_b06FwRodata; + + load_cpu_fw(bp, &cpu_reg, &fw); + + /* Initialize the TX Patch-up Processor. */ + cpu_reg.mode = BNX2_TPAT_CPU_MODE; + cpu_reg.mode_value_halt = BNX2_TPAT_CPU_MODE_SOFT_HALT; + cpu_reg.mode_value_sstep = BNX2_TPAT_CPU_MODE_STEP_ENA; + cpu_reg.state = BNX2_TPAT_CPU_STATE; + cpu_reg.state_value_clear = 0xffffff; + cpu_reg.gpr0 = BNX2_TPAT_CPU_REG_FILE; + cpu_reg.evmask = BNX2_TPAT_CPU_EVENT_MASK; + cpu_reg.pc = BNX2_TPAT_CPU_PROGRAM_COUNTER; + cpu_reg.inst = BNX2_TPAT_CPU_INSTRUCTION; + cpu_reg.bp = BNX2_TPAT_CPU_HW_BREAKPOINT; + cpu_reg.spad_base = BNX2_TPAT_SCRATCH; + cpu_reg.mips_view_base = 0x8000000; + + fw.ver_major = bnx2_TPAT_b06FwReleaseMajor; + fw.ver_minor = bnx2_TPAT_b06FwReleaseMinor; + fw.ver_fix = bnx2_TPAT_b06FwReleaseFix; + fw.start_addr = bnx2_TPAT_b06FwStartAddr; + + fw.text_addr = bnx2_TPAT_b06FwTextAddr; + fw.text_len = bnx2_TPAT_b06FwTextLen; + fw.text_index = 0; + fw.text = bnx2_TPAT_b06FwText; + + fw.data_addr = bnx2_TPAT_b06FwDataAddr; + fw.data_len = bnx2_TPAT_b06FwDataLen; + fw.data_index = 0; + fw.data = bnx2_TPAT_b06FwData; + + fw.sbss_addr = bnx2_TPAT_b06FwSbssAddr; + fw.sbss_len = bnx2_TPAT_b06FwSbssLen; + fw.sbss_index = 0; + fw.sbss = bnx2_TPAT_b06FwSbss; + + fw.bss_addr = bnx2_TPAT_b06FwBssAddr; + fw.bss_len = bnx2_TPAT_b06FwBssLen; + fw.bss_index = 0; + fw.bss = bnx2_TPAT_b06FwBss; + + fw.rodata_addr = bnx2_TPAT_b06FwRodataAddr; + fw.rodata_len = bnx2_TPAT_b06FwRodataLen; + fw.rodata_index = 0; + fw.rodata = bnx2_TPAT_b06FwRodata; + + load_cpu_fw(bp, &cpu_reg, &fw); + + /* Initialize the Completion Processor. */ + cpu_reg.mode = BNX2_COM_CPU_MODE; + cpu_reg.mode_value_halt = BNX2_COM_CPU_MODE_SOFT_HALT; + cpu_reg.mode_value_sstep = BNX2_COM_CPU_MODE_STEP_ENA; + cpu_reg.state = BNX2_COM_CPU_STATE; + cpu_reg.state_value_clear = 0xffffff; + cpu_reg.gpr0 = BNX2_COM_CPU_REG_FILE; + cpu_reg.evmask = BNX2_COM_CPU_EVENT_MASK; + cpu_reg.pc = BNX2_COM_CPU_PROGRAM_COUNTER; + cpu_reg.inst = BNX2_COM_CPU_INSTRUCTION; + cpu_reg.bp = BNX2_COM_CPU_HW_BREAKPOINT; + cpu_reg.spad_base = BNX2_COM_SCRATCH; + cpu_reg.mips_view_base = 0x8000000; + + fw.ver_major = bnx2_COM_b06FwReleaseMajor; + fw.ver_minor = bnx2_COM_b06FwReleaseMinor; + fw.ver_fix = bnx2_COM_b06FwReleaseFix; + fw.start_addr = bnx2_COM_b06FwStartAddr; + + fw.text_addr = bnx2_COM_b06FwTextAddr; + fw.text_len = bnx2_COM_b06FwTextLen; + fw.text_index = 0; + fw.text = bnx2_COM_b06FwText; + + fw.data_addr = bnx2_COM_b06FwDataAddr; + fw.data_len = bnx2_COM_b06FwDataLen; + fw.data_index = 0; + fw.data = bnx2_COM_b06FwData; + + fw.sbss_addr = bnx2_COM_b06FwSbssAddr; + fw.sbss_len = bnx2_COM_b06FwSbssLen; + fw.sbss_index = 0; + fw.sbss = bnx2_COM_b06FwSbss; + + fw.bss_addr = bnx2_COM_b06FwBssAddr; + fw.bss_len = bnx2_COM_b06FwBssLen; + fw.bss_index = 0; + fw.bss = bnx2_COM_b06FwBss; + + fw.rodata_addr = bnx2_COM_b06FwRodataAddr; + fw.rodata_len = bnx2_COM_b06FwRodataLen; + fw.rodata_index = 0; + fw.rodata = bnx2_COM_b06FwRodata; + + load_cpu_fw(bp, &cpu_reg, &fw); + +} + +static int +bnx2_set_power_state(struct bnx2 *bp, int state) +{ + u16 pmcsr; + + pci_read_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, &pmcsr); + + switch (state) { + case 0: { + u32 val; + + pci_write_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, + (pmcsr & ~PCI_PM_CTRL_STATE_MASK) | + PCI_PM_CTRL_PME_STATUS); + + if (pmcsr & PCI_PM_CTRL_STATE_MASK) + /* delay required during transition out of D3hot */ + msleep(20); + + val = REG_RD(bp, BNX2_EMAC_MODE); + val |= BNX2_EMAC_MODE_MPKT_RCVD | BNX2_EMAC_MODE_ACPI_RCVD; + val &= ~BNX2_EMAC_MODE_MPKT; + REG_WR(bp, BNX2_EMAC_MODE, val); + + val = REG_RD(bp, BNX2_RPM_CONFIG); + val &= ~BNX2_RPM_CONFIG_ACPI_ENA; + REG_WR(bp, BNX2_RPM_CONFIG, val); + break; + } + case 3: { + int i; + u32 val, wol_msg; + + if (bp->wol) { + u32 advertising; + u8 autoneg; + + autoneg = bp->autoneg; + advertising = bp->advertising; + + bp->autoneg = AUTONEG_SPEED; + bp->advertising = ADVERTISED_10baseT_Half | + ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full | + ADVERTISED_Autoneg; + + bnx2_setup_copper_phy(bp); + + bp->autoneg = autoneg; + bp->advertising = advertising; + + bnx2_set_mac_addr(bp); + + val = REG_RD(bp, BNX2_EMAC_MODE); + + /* Enable port mode. */ + val &= ~BNX2_EMAC_MODE_PORT; + val |= BNX2_EMAC_MODE_PORT_MII | + BNX2_EMAC_MODE_MPKT_RCVD | + BNX2_EMAC_MODE_ACPI_RCVD | + BNX2_EMAC_MODE_FORCE_LINK | + BNX2_EMAC_MODE_MPKT; + + REG_WR(bp, BNX2_EMAC_MODE, val); + + /* receive all multicast */ + for (i = 0; i < NUM_MC_HASH_REGISTERS; i++) { + REG_WR(bp, BNX2_EMAC_MULTICAST_HASH0 + (i * 4), + 0xffffffff); + } + REG_WR(bp, BNX2_EMAC_RX_MODE, + BNX2_EMAC_RX_MODE_SORT_MODE); + + val = 1 | BNX2_RPM_SORT_USER0_BC_EN | + BNX2_RPM_SORT_USER0_MC_EN; + REG_WR(bp, BNX2_RPM_SORT_USER0, 0x0); + REG_WR(bp, BNX2_RPM_SORT_USER0, val); + REG_WR(bp, BNX2_RPM_SORT_USER0, val | + BNX2_RPM_SORT_USER0_ENA); + + /* Need to enable EMAC and RPM for WOL. */ + REG_WR(bp, BNX2_MISC_ENABLE_SET_BITS, + BNX2_MISC_ENABLE_SET_BITS_RX_PARSER_MAC_ENABLE | + BNX2_MISC_ENABLE_SET_BITS_TX_HEADER_Q_ENABLE | + BNX2_MISC_ENABLE_SET_BITS_EMAC_ENABLE); + + val = REG_RD(bp, BNX2_RPM_CONFIG); + val &= ~BNX2_RPM_CONFIG_ACPI_ENA; + REG_WR(bp, BNX2_RPM_CONFIG, val); + + wol_msg = BNX2_DRV_MSG_CODE_SUSPEND_WOL; + } + else { + wol_msg = BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL; + } + + bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT3 | wol_msg); + + pmcsr &= ~PCI_PM_CTRL_STATE_MASK; + if ((CHIP_ID(bp) == CHIP_ID_5706_A0) || + (CHIP_ID(bp) == CHIP_ID_5706_A1)) { + + if (bp->wol) + pmcsr |= 3; + } + else { + pmcsr |= 3; + } + if (bp->wol) { + pmcsr |= PCI_PM_CTRL_PME_ENABLE; + } + pci_write_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, + pmcsr); + + /* No more memory access after this point until + * device is brought back to D0. + */ + udelay(50); + break; + } + default: + return -EINVAL; + } + return 0; +} + +static int +bnx2_acquire_nvram_lock(struct bnx2 *bp) +{ + u32 val; + int j; + + /* Request access to the flash interface. */ + REG_WR(bp, BNX2_NVM_SW_ARB, BNX2_NVM_SW_ARB_ARB_REQ_SET2); + for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) { + val = REG_RD(bp, BNX2_NVM_SW_ARB); + if (val & BNX2_NVM_SW_ARB_ARB_ARB2) + break; + + udelay(5); + } + + if (j >= NVRAM_TIMEOUT_COUNT) + return -EBUSY; + + return 0; +} + +static int +bnx2_release_nvram_lock(struct bnx2 *bp) +{ + int j; + u32 val; + + /* Relinquish nvram interface. */ + REG_WR(bp, BNX2_NVM_SW_ARB, BNX2_NVM_SW_ARB_ARB_REQ_CLR2); + + for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) { + val = REG_RD(bp, BNX2_NVM_SW_ARB); + if (!(val & BNX2_NVM_SW_ARB_ARB_ARB2)) + break; + + udelay(5); + } + + if (j >= NVRAM_TIMEOUT_COUNT) + return -EBUSY; + + return 0; +} + + +static int +bnx2_enable_nvram_write(struct bnx2 *bp) +{ + u32 val; + + val = REG_RD(bp, BNX2_MISC_CFG); + REG_WR(bp, BNX2_MISC_CFG, val | BNX2_MISC_CFG_NVM_WR_EN_PCI); + + if (!bp->flash_info->buffered) { + int j; + + REG_WR(bp, BNX2_NVM_COMMAND, BNX2_NVM_COMMAND_DONE); + REG_WR(bp, BNX2_NVM_COMMAND, + BNX2_NVM_COMMAND_WREN | BNX2_NVM_COMMAND_DOIT); + + for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) { + udelay(5); + + val = REG_RD(bp, BNX2_NVM_COMMAND); + if (val & BNX2_NVM_COMMAND_DONE) + break; + } + + if (j >= NVRAM_TIMEOUT_COUNT) + return -EBUSY; + } + return 0; +} + +static void +bnx2_disable_nvram_write(struct bnx2 *bp) +{ + u32 val; + + val = REG_RD(bp, BNX2_MISC_CFG); + REG_WR(bp, BNX2_MISC_CFG, val & ~BNX2_MISC_CFG_NVM_WR_EN); +} + + +static void +bnx2_enable_nvram_access(struct bnx2 *bp) +{ + u32 val; + + val = REG_RD(bp, BNX2_NVM_ACCESS_ENABLE); + /* Enable both bits, even on read. */ + REG_WR(bp, BNX2_NVM_ACCESS_ENABLE, + val | BNX2_NVM_ACCESS_ENABLE_EN | BNX2_NVM_ACCESS_ENABLE_WR_EN); +} + +static void +bnx2_disable_nvram_access(struct bnx2 *bp) +{ + u32 val; + + val = REG_RD(bp, BNX2_NVM_ACCESS_ENABLE); + /* Disable both bits, even after read. */ + REG_WR(bp, BNX2_NVM_ACCESS_ENABLE, + val & ~(BNX2_NVM_ACCESS_ENABLE_EN | + BNX2_NVM_ACCESS_ENABLE_WR_EN)); +} + +static int +bnx2_nvram_erase_page(struct bnx2 *bp, u32 offset) +{ + u32 cmd; + int j; + + if (bp->flash_info->buffered) + /* Buffered flash, no erase needed */ + return 0; + + /* Build an erase command */ + cmd = BNX2_NVM_COMMAND_ERASE | BNX2_NVM_COMMAND_WR | + BNX2_NVM_COMMAND_DOIT; + + /* Need to clear DONE bit separately. */ + REG_WR(bp, BNX2_NVM_COMMAND, BNX2_NVM_COMMAND_DONE); + + /* Address of the NVRAM to read from. */ + REG_WR(bp, BNX2_NVM_ADDR, offset & BNX2_NVM_ADDR_NVM_ADDR_VALUE); + + /* Issue an erase command. */ + REG_WR(bp, BNX2_NVM_COMMAND, cmd); + + /* Wait for completion. */ + for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) { + u32 val; + + udelay(5); + + val = REG_RD(bp, BNX2_NVM_COMMAND); + if (val & BNX2_NVM_COMMAND_DONE) + break; + } + + if (j >= NVRAM_TIMEOUT_COUNT) + return -EBUSY; + + return 0; +} + +static int +bnx2_nvram_read_dword(struct bnx2 *bp, u32 offset, u8 *ret_val, u32 cmd_flags) +{ + u32 cmd; + int j; + + /* Build the command word. */ + cmd = BNX2_NVM_COMMAND_DOIT | cmd_flags; + + /* Calculate an offset of a buffered flash. */ + if (bp->flash_info->buffered) { + offset = ((offset / bp->flash_info->page_size) << + bp->flash_info->page_bits) + + (offset % bp->flash_info->page_size); + } + + /* Need to clear DONE bit separately. */ + REG_WR(bp, BNX2_NVM_COMMAND, BNX2_NVM_COMMAND_DONE); + + /* Address of the NVRAM to read from. */ + REG_WR(bp, BNX2_NVM_ADDR, offset & BNX2_NVM_ADDR_NVM_ADDR_VALUE); + + /* Issue a read command. */ + REG_WR(bp, BNX2_NVM_COMMAND, cmd); + + /* Wait for completion. */ + for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) { + u32 val; + + udelay(5); + + val = REG_RD(bp, BNX2_NVM_COMMAND); + if (val & BNX2_NVM_COMMAND_DONE) { + val = REG_RD(bp, BNX2_NVM_READ); + + val = be32_to_cpu(val); + memcpy(ret_val, &val, 4); + break; + } + } + if (j >= NVRAM_TIMEOUT_COUNT) + return -EBUSY; + + return 0; +} + + +static int +bnx2_nvram_write_dword(struct bnx2 *bp, u32 offset, u8 *val, u32 cmd_flags) +{ + u32 cmd, val32; + int j; + + /* Build the command word. */ + cmd = BNX2_NVM_COMMAND_DOIT | BNX2_NVM_COMMAND_WR | cmd_flags; + + /* Calculate an offset of a buffered flash. */ + if (bp->flash_info->buffered) { + offset = ((offset / bp->flash_info->page_size) << + bp->flash_info->page_bits) + + (offset % bp->flash_info->page_size); + } + + /* Need to clear DONE bit separately. */ + REG_WR(bp, BNX2_NVM_COMMAND, BNX2_NVM_COMMAND_DONE); + + memcpy(&val32, val, 4); + val32 = cpu_to_be32(val32); + + /* Write the data. */ + REG_WR(bp, BNX2_NVM_WRITE, val32); + + /* Address of the NVRAM to write to. */ + REG_WR(bp, BNX2_NVM_ADDR, offset & BNX2_NVM_ADDR_NVM_ADDR_VALUE); + + /* Issue the write command. */ + REG_WR(bp, BNX2_NVM_COMMAND, cmd); + + /* Wait for completion. */ + for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) { + udelay(5); + + if (REG_RD(bp, BNX2_NVM_COMMAND) & BNX2_NVM_COMMAND_DONE) + break; + } + if (j >= NVRAM_TIMEOUT_COUNT) + return -EBUSY; + + return 0; +} + +static int +bnx2_init_nvram(struct bnx2 *bp) +{ + u32 val; + int j, entry_count, rc; + struct flash_spec *flash; + + /* Determine the selected interface. */ + val = REG_RD(bp, BNX2_NVM_CFG1); + + entry_count = sizeof(flash_table) / sizeof(struct flash_spec); + + rc = 0; + if (val & 0x40000000) { + + /* Flash interface has been reconfigured */ + for (j = 0, flash = &flash_table[0]; j < entry_count; + j++, flash++) { + + if (val == flash->config1) { + bp->flash_info = flash; + break; + } + } + } + else { + /* Not yet been reconfigured */ + + for (j = 0, flash = &flash_table[0]; j < entry_count; + j++, flash++) { + + if ((val & FLASH_STRAP_MASK) == flash->strapping) { + bp->flash_info = flash; + + /* Request access to the flash interface. */ + if ((rc = bnx2_acquire_nvram_lock(bp)) != 0) + return rc; + + /* Enable access to flash interface */ + bnx2_enable_nvram_access(bp); + + /* Reconfigure the flash interface */ + REG_WR(bp, BNX2_NVM_CFG1, flash->config1); + REG_WR(bp, BNX2_NVM_CFG2, flash->config2); + REG_WR(bp, BNX2_NVM_CFG3, flash->config3); + REG_WR(bp, BNX2_NVM_WRITE1, flash->write1); + + /* Disable access to flash interface */ + bnx2_disable_nvram_access(bp); + bnx2_release_nvram_lock(bp); + + break; + } + } + } /* if (val & 0x40000000) */ + + if (j == entry_count) { + bp->flash_info = NULL; + printk(KERN_ALERT "Unknown flash/EEPROM type.\n"); + rc = -ENODEV; + } + + return rc; +} + +static int +bnx2_nvram_read(struct bnx2 *bp, u32 offset, u8 *ret_buf, + int buf_size) +{ + int rc = 0; + u32 cmd_flags, offset32, len32, extra; + + if (buf_size == 0) + return 0; + + /* Request access to the flash interface. */ + if ((rc = bnx2_acquire_nvram_lock(bp)) != 0) + return rc; + + /* Enable access to flash interface */ + bnx2_enable_nvram_access(bp); + + len32 = buf_size; + offset32 = offset; + extra = 0; + + cmd_flags = 0; + + if (offset32 & 3) { + u8 buf[4]; + u32 pre_len; + + offset32 &= ~3; + pre_len = 4 - (offset & 3); + + if (pre_len >= len32) { + pre_len = len32; + cmd_flags = BNX2_NVM_COMMAND_FIRST | + BNX2_NVM_COMMAND_LAST; + } + else { + cmd_flags = BNX2_NVM_COMMAND_FIRST; + } + + rc = bnx2_nvram_read_dword(bp, offset32, buf, cmd_flags); + + if (rc) + return rc; + + memcpy(ret_buf, buf + (offset & 3), pre_len); + + offset32 += 4; + ret_buf += pre_len; + len32 -= pre_len; + } + if (len32 & 3) { + extra = 4 - (len32 & 3); + len32 = (len32 + 4) & ~3; + } + + if (len32 == 4) { + u8 buf[4]; + + if (cmd_flags) + cmd_flags = BNX2_NVM_COMMAND_LAST; + else + cmd_flags = BNX2_NVM_COMMAND_FIRST | + BNX2_NVM_COMMAND_LAST; + + rc = bnx2_nvram_read_dword(bp, offset32, buf, cmd_flags); + + memcpy(ret_buf, buf, 4 - extra); + } + else if (len32 > 0) { + u8 buf[4]; + + /* Read the first word. */ + if (cmd_flags) + cmd_flags = 0; + else + cmd_flags = BNX2_NVM_COMMAND_FIRST; + + rc = bnx2_nvram_read_dword(bp, offset32, ret_buf, cmd_flags); + + /* Advance to the next dword. */ + offset32 += 4; + ret_buf += 4; + len32 -= 4; + + while (len32 > 4 && rc == 0) { + rc = bnx2_nvram_read_dword(bp, offset32, ret_buf, 0); + + /* Advance to the next dword. */ + offset32 += 4; + ret_buf += 4; + len32 -= 4; + } + + if (rc) + return rc; + + cmd_flags = BNX2_NVM_COMMAND_LAST; + rc = bnx2_nvram_read_dword(bp, offset32, buf, cmd_flags); + + memcpy(ret_buf, buf, 4 - extra); + } + + /* Disable access to flash interface */ + bnx2_disable_nvram_access(bp); + + bnx2_release_nvram_lock(bp); + + return rc; +} + +static int +bnx2_nvram_write(struct bnx2 *bp, u32 offset, u8 *data_buf, + int buf_size) +{ + u32 written, offset32, len32; + u8 *buf, start[4], end[4]; + int rc = 0; + int align_start, align_end; + + buf = data_buf; + offset32 = offset; + len32 = buf_size; + align_start = align_end = 0; + + if ((align_start = (offset32 & 3))) { + offset32 &= ~3; + len32 += align_start; + if ((rc = bnx2_nvram_read(bp, offset32, start, 4))) + return rc; + } + + if (len32 & 3) { + if ((len32 > 4) || !align_start) { + align_end = 4 - (len32 & 3); + len32 += align_end; + if ((rc = bnx2_nvram_read(bp, offset32 + len32 - 4, + end, 4))) { + return rc; + } + } + } + + if (align_start || align_end) { + buf = kmalloc(len32, GFP_KERNEL); + if (buf == 0) + return -ENOMEM; + if (align_start) { + memcpy(buf, start, 4); + } + if (align_end) { + memcpy(buf + len32 - 4, end, 4); + } + memcpy(buf + align_start, data_buf, buf_size); + } + + written = 0; + while ((written < len32) && (rc == 0)) { + u32 page_start, page_end, data_start, data_end; + u32 addr, cmd_flags; + int i; + u8 flash_buffer[264]; + + /* Find the page_start addr */ + page_start = offset32 + written; + page_start -= (page_start % bp->flash_info->page_size); + /* Find the page_end addr */ + page_end = page_start + bp->flash_info->page_size; + /* Find the data_start addr */ + data_start = (written == 0) ? offset32 : page_start; + /* Find the data_end addr */ + data_end = (page_end > offset32 + len32) ? + (offset32 + len32) : page_end; + + /* Request access to the flash interface. */ + if ((rc = bnx2_acquire_nvram_lock(bp)) != 0) + goto nvram_write_end; + + /* Enable access to flash interface */ + bnx2_enable_nvram_access(bp); + + cmd_flags = BNX2_NVM_COMMAND_FIRST; + if (bp->flash_info->buffered == 0) { + int j; + + /* Read the whole page into the buffer + * (non-buffer flash only) */ + for (j = 0; j < bp->flash_info->page_size; j += 4) { + if (j == (bp->flash_info->page_size - 4)) { + cmd_flags |= BNX2_NVM_COMMAND_LAST; + } + rc = bnx2_nvram_read_dword(bp, + page_start + j, + &flash_buffer[j], + cmd_flags); + + if (rc) + goto nvram_write_end; + + cmd_flags = 0; + } + } + + /* Enable writes to flash interface (unlock write-protect) */ + if ((rc = bnx2_enable_nvram_write(bp)) != 0) + goto nvram_write_end; + + /* Erase the page */ + if ((rc = bnx2_nvram_erase_page(bp, page_start)) != 0) + goto nvram_write_end; + + /* Re-enable the write again for the actual write */ + bnx2_enable_nvram_write(bp); + + /* Loop to write back the buffer data from page_start to + * data_start */ + i = 0; + if (bp->flash_info->buffered == 0) { + for (addr = page_start; addr < data_start; + addr += 4, i += 4) { + + rc = bnx2_nvram_write_dword(bp, addr, + &flash_buffer[i], cmd_flags); + + if (rc != 0) + goto nvram_write_end; + + cmd_flags = 0; + } + } + + /* Loop to write the new data from data_start to data_end */ + for (addr = data_start; addr < data_end; addr += 4, i++) { + if ((addr == page_end - 4) || + ((bp->flash_info->buffered) && + (addr == data_end - 4))) { + + cmd_flags |= BNX2_NVM_COMMAND_LAST; + } + rc = bnx2_nvram_write_dword(bp, addr, buf, + cmd_flags); + + if (rc != 0) + goto nvram_write_end; + + cmd_flags = 0; + buf += 4; + } + + /* Loop to write back the buffer data from data_end + * to page_end */ + if (bp->flash_info->buffered == 0) { + for (addr = data_end; addr < page_end; + addr += 4, i += 4) { + + if (addr == page_end-4) { + cmd_flags = BNX2_NVM_COMMAND_LAST; + } + rc = bnx2_nvram_write_dword(bp, addr, + &flash_buffer[i], cmd_flags); + + if (rc != 0) + goto nvram_write_end; + + cmd_flags = 0; + } + } + + /* Disable writes to flash interface (lock write-protect) */ + bnx2_disable_nvram_write(bp); + + /* Disable access to flash interface */ + bnx2_disable_nvram_access(bp); + bnx2_release_nvram_lock(bp); + + /* Increment written */ + written += data_end - data_start; + } + +nvram_write_end: + if (align_start || align_end) + kfree(buf); + return rc; +} + +static int +bnx2_reset_chip(struct bnx2 *bp, u32 reset_code) +{ + u32 val; + int i, rc = 0; + + /* Wait for the current PCI transaction to complete before + * issuing a reset. */ + REG_WR(bp, BNX2_MISC_ENABLE_CLR_BITS, + BNX2_MISC_ENABLE_CLR_BITS_TX_DMA_ENABLE | + BNX2_MISC_ENABLE_CLR_BITS_DMA_ENGINE_ENABLE | + BNX2_MISC_ENABLE_CLR_BITS_RX_DMA_ENABLE | + BNX2_MISC_ENABLE_CLR_BITS_HOST_COALESCE_ENABLE); + val = REG_RD(bp, BNX2_MISC_ENABLE_CLR_BITS); + udelay(5); + + /* Deposit a driver reset signature so the firmware knows that + * this is a soft reset. */ + REG_WR_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_DRV_RESET_SIGNATURE, + BNX2_DRV_RESET_SIGNATURE_MAGIC); + + bp->fw_timed_out = 0; + + /* Wait for the firmware to tell us it is ok to issue a reset. */ + bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT0 | reset_code); + + /* Do a dummy read to force the chip to complete all current transaction + * before we issue a reset. */ + val = REG_RD(bp, BNX2_MISC_ID); + + val = BNX2_PCICFG_MISC_CONFIG_CORE_RST_REQ | + BNX2_PCICFG_MISC_CONFIG_REG_WINDOW_ENA | + BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP; + + /* Chip reset. */ + REG_WR(bp, BNX2_PCICFG_MISC_CONFIG, val); + + if ((CHIP_ID(bp) == CHIP_ID_5706_A0) || + (CHIP_ID(bp) == CHIP_ID_5706_A1)) + msleep(15); + + /* Reset takes approximate 30 usec */ + for (i = 0; i < 10; i++) { + val = REG_RD(bp, BNX2_PCICFG_MISC_CONFIG); + if ((val & (BNX2_PCICFG_MISC_CONFIG_CORE_RST_REQ | + BNX2_PCICFG_MISC_CONFIG_CORE_RST_BSY)) == 0) { + break; + } + udelay(10); + } + + if (val & (BNX2_PCICFG_MISC_CONFIG_CORE_RST_REQ | + BNX2_PCICFG_MISC_CONFIG_CORE_RST_BSY)) { + printk(KERN_ERR PFX "Chip reset did not complete\n"); + return -EBUSY; + } + + /* Make sure byte swapping is properly configured. */ + val = REG_RD(bp, BNX2_PCI_SWAP_DIAG0); + if (val != 0x01020304) { + printk(KERN_ERR PFX "Chip not in correct endian mode\n"); + return -ENODEV; + } + + bp->fw_timed_out = 0; + + /* Wait for the firmware to finish its initialization. */ + bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT1 | reset_code); + + if (CHIP_ID(bp) == CHIP_ID_5706_A0) { + /* Adjust the voltage regular to two steps lower. The default + * of this register is 0x0000000e. */ + REG_WR(bp, BNX2_MISC_VREG_CONTROL, 0x000000fa); + + /* Remove bad rbuf memory from the free pool. */ + rc = bnx2_alloc_bad_rbuf(bp); + } + + return rc; +} + +static int +bnx2_init_chip(struct bnx2 *bp) +{ + u32 val; + + /* Make sure the interrupt is not active. */ + REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD, BNX2_PCICFG_INT_ACK_CMD_MASK_INT); + + val = BNX2_DMA_CONFIG_DATA_BYTE_SWAP | + BNX2_DMA_CONFIG_DATA_WORD_SWAP | +#ifdef __BIG_ENDIAN + BNX2_DMA_CONFIG_CNTL_BYTE_SWAP | +#endif + BNX2_DMA_CONFIG_CNTL_WORD_SWAP | + DMA_READ_CHANS << 12 | + DMA_WRITE_CHANS << 16; + + val |= (0x2 << 20) | (1 << 11); + + if ((bp->flags & PCIX_FLAG) && (bp->bus_speed_mhz = 133)) + val |= (1 << 23); + + if ((CHIP_NUM(bp) == CHIP_NUM_5706) && + (CHIP_ID(bp) != CHIP_ID_5706_A0) && !(bp->flags & PCIX_FLAG)) + val |= BNX2_DMA_CONFIG_CNTL_PING_PONG_DMA; + + REG_WR(bp, BNX2_DMA_CONFIG, val); + + if (CHIP_ID(bp) == CHIP_ID_5706_A0) { + val = REG_RD(bp, BNX2_TDMA_CONFIG); + val |= BNX2_TDMA_CONFIG_ONE_DMA; + REG_WR(bp, BNX2_TDMA_CONFIG, val); + } + + if (bp->flags & PCIX_FLAG) { + u16 val16; + + pci_read_config_word(bp->pdev, bp->pcix_cap + PCI_X_CMD, + &val16); + pci_write_config_word(bp->pdev, bp->pcix_cap + PCI_X_CMD, + val16 & ~PCI_X_CMD_ERO); + } + + REG_WR(bp, BNX2_MISC_ENABLE_SET_BITS, + BNX2_MISC_ENABLE_SET_BITS_HOST_COALESCE_ENABLE | + BNX2_MISC_ENABLE_STATUS_BITS_RX_V2P_ENABLE | + BNX2_MISC_ENABLE_STATUS_BITS_CONTEXT_ENABLE); + + /* Initialize context mapping and zero out the quick contexts. The + * context block must have already been enabled. */ + bnx2_init_context(bp); + + bnx2_init_cpus(bp); + bnx2_init_nvram(bp); + + bnx2_set_mac_addr(bp); + + val = REG_RD(bp, BNX2_MQ_CONFIG); + val &= ~BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE; + val |= BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE_256; + REG_WR(bp, BNX2_MQ_CONFIG, val); + + val = 0x10000 + (MAX_CID_CNT * MB_KERNEL_CTX_SIZE); + REG_WR(bp, BNX2_MQ_KNL_BYP_WIND_START, val); + REG_WR(bp, BNX2_MQ_KNL_WIND_END, val); + + val = (BCM_PAGE_BITS - 8) << 24; + REG_WR(bp, BNX2_RV2P_CONFIG, val); + + /* Configure page size. */ + val = REG_RD(bp, BNX2_TBDR_CONFIG); + val &= ~BNX2_TBDR_CONFIG_PAGE_SIZE; + val |= (BCM_PAGE_BITS - 8) << 24 | 0x40; + REG_WR(bp, BNX2_TBDR_CONFIG, val); + + val = bp->mac_addr[0] + + (bp->mac_addr[1] << 8) + + (bp->mac_addr[2] << 16) + + bp->mac_addr[3] + + (bp->mac_addr[4] << 8) + + (bp->mac_addr[5] << 16); + REG_WR(bp, BNX2_EMAC_BACKOFF_SEED, val); + + /* Program the MTU. Also include 4 bytes for CRC32. */ + val = bp->dev->mtu + ETH_HLEN + 4; + if (val > (MAX_ETHERNET_PACKET_SIZE + 4)) + val |= BNX2_EMAC_RX_MTU_SIZE_JUMBO_ENA; + REG_WR(bp, BNX2_EMAC_RX_MTU_SIZE, val); + + bp->last_status_idx = 0; + bp->rx_mode = BNX2_EMAC_RX_MODE_SORT_MODE; + + /* Set up how to generate a link change interrupt. */ + REG_WR(bp, BNX2_EMAC_ATTENTION_ENA, BNX2_EMAC_ATTENTION_ENA_LINK); + + REG_WR(bp, BNX2_HC_STATUS_ADDR_L, + (u64) bp->status_blk_mapping & 0xffffffff); + REG_WR(bp, BNX2_HC_STATUS_ADDR_H, (u64) bp->status_blk_mapping >> 32); + + REG_WR(bp, BNX2_HC_STATISTICS_ADDR_L, + (u64) bp->stats_blk_mapping & 0xffffffff); + REG_WR(bp, BNX2_HC_STATISTICS_ADDR_H, + (u64) bp->stats_blk_mapping >> 32); + + REG_WR(bp, BNX2_HC_TX_QUICK_CONS_TRIP, + (bp->tx_quick_cons_trip_int << 16) | bp->tx_quick_cons_trip); + + REG_WR(bp, BNX2_HC_RX_QUICK_CONS_TRIP, + (bp->rx_quick_cons_trip_int << 16) | bp->rx_quick_cons_trip); + + REG_WR(bp, BNX2_HC_COMP_PROD_TRIP, + (bp->comp_prod_trip_int << 16) | bp->comp_prod_trip); + + REG_WR(bp, BNX2_HC_TX_TICKS, (bp->tx_ticks_int << 16) | bp->tx_ticks); + + REG_WR(bp, BNX2_HC_RX_TICKS, (bp->rx_ticks_int << 16) | bp->rx_ticks); + + REG_WR(bp, BNX2_HC_COM_TICKS, + (bp->com_ticks_int << 16) | bp->com_ticks); + + REG_WR(bp, BNX2_HC_CMD_TICKS, + (bp->cmd_ticks_int << 16) | bp->cmd_ticks); + + REG_WR(bp, BNX2_HC_STATS_TICKS, bp->stats_ticks & 0xffff00); + REG_WR(bp, BNX2_HC_STAT_COLLECT_TICKS, 0xbb8); /* 3ms */ + + if (CHIP_ID(bp) == CHIP_ID_5706_A1) + REG_WR(bp, BNX2_HC_CONFIG, BNX2_HC_CONFIG_COLLECT_STATS); + else { + REG_WR(bp, BNX2_HC_CONFIG, BNX2_HC_CONFIG_RX_TMR_MODE | + BNX2_HC_CONFIG_TX_TMR_MODE | + BNX2_HC_CONFIG_COLLECT_STATS); + } + + /* Clear internal stats counters. */ + REG_WR(bp, BNX2_HC_COMMAND, BNX2_HC_COMMAND_CLR_STAT_NOW); + + REG_WR(bp, BNX2_HC_ATTN_BITS_ENABLE, STATUS_ATTN_BITS_LINK_STATE); + + /* Initialize the receive filter. */ + bnx2_set_rx_mode(bp->dev); + + bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT2 | BNX2_DRV_MSG_CODE_RESET); + + REG_WR(bp, BNX2_MISC_ENABLE_SET_BITS, 0x5ffffff); + REG_RD(bp, BNX2_MISC_ENABLE_SET_BITS); + + udelay(20); + + return 0; +} + + +static void +bnx2_init_tx_ring(struct bnx2 *bp) +{ + struct tx_bd *txbd; + u32 val; + + txbd = &bp->tx_desc_ring[MAX_TX_DESC_CNT]; + + txbd->tx_bd_haddr_hi = (u64) bp->tx_desc_mapping >> 32; + txbd->tx_bd_haddr_lo = (u64) bp->tx_desc_mapping & 0xffffffff; + + bp->tx_prod = 0; + bp->tx_cons = 0; + bp->tx_prod_bseq = 0; + atomic_set(&bp->tx_avail_bd, bp->tx_ring_size); + + val = BNX2_L2CTX_TYPE_TYPE_L2; + val |= BNX2_L2CTX_TYPE_SIZE_L2; + CTX_WR(bp, GET_CID_ADDR(TX_CID), BNX2_L2CTX_TYPE, val); + + val = BNX2_L2CTX_CMD_TYPE_TYPE_L2; + val |= 8 << 16; + CTX_WR(bp, GET_CID_ADDR(TX_CID), BNX2_L2CTX_CMD_TYPE, val); + + val = (u64) bp->tx_desc_mapping >> 32; + CTX_WR(bp, GET_CID_ADDR(TX_CID), BNX2_L2CTX_TBDR_BHADDR_HI, val); + + val = (u64) bp->tx_desc_mapping & 0xffffffff; + CTX_WR(bp, GET_CID_ADDR(TX_CID), BNX2_L2CTX_TBDR_BHADDR_LO, val); +} + +static void +bnx2_init_rx_ring(struct bnx2 *bp) +{ + struct rx_bd *rxbd; + int i; + u16 prod, ring_prod; + u32 val; + + /* 8 for CRC and VLAN */ + bp->rx_buf_use_size = bp->dev->mtu + ETH_HLEN + bp->rx_offset + 8; + /* 8 for alignment */ + bp->rx_buf_size = bp->rx_buf_use_size + 8; + + ring_prod = prod = bp->rx_prod = 0; + bp->rx_cons = 0; + bp->rx_prod_bseq = 0; + + rxbd = &bp->rx_desc_ring[0]; + for (i = 0; i < MAX_RX_DESC_CNT; i++, rxbd++) { + rxbd->rx_bd_len = bp->rx_buf_use_size; + rxbd->rx_bd_flags = RX_BD_FLAGS_START | RX_BD_FLAGS_END; + } + + rxbd->rx_bd_haddr_hi = (u64) bp->rx_desc_mapping >> 32; + rxbd->rx_bd_haddr_lo = (u64) bp->rx_desc_mapping & 0xffffffff; + + val = BNX2_L2CTX_CTX_TYPE_CTX_BD_CHN_TYPE_VALUE; + val |= BNX2_L2CTX_CTX_TYPE_SIZE_L2; + val |= 0x02 << 8; + CTX_WR(bp, GET_CID_ADDR(RX_CID), BNX2_L2CTX_CTX_TYPE, val); + + val = (u64) bp->rx_desc_mapping >> 32; + CTX_WR(bp, GET_CID_ADDR(RX_CID), BNX2_L2CTX_NX_BDHADDR_HI, val); + + val = (u64) bp->rx_desc_mapping & 0xffffffff; + CTX_WR(bp, GET_CID_ADDR(RX_CID), BNX2_L2CTX_NX_BDHADDR_LO, val); + + for ( ;ring_prod < bp->rx_ring_size; ) { + if (bnx2_alloc_rx_skb(bp, ring_prod) < 0) { + break; + } + prod = NEXT_RX_BD(prod); + ring_prod = RX_RING_IDX(prod); + } + bp->rx_prod = prod; + + REG_WR16(bp, MB_RX_CID_ADDR + BNX2_L2CTX_HOST_BDIDX, prod); + + REG_WR(bp, MB_RX_CID_ADDR + BNX2_L2CTX_HOST_BSEQ, bp->rx_prod_bseq); +} + +static void +bnx2_free_tx_skbs(struct bnx2 *bp) +{ + int i; + + if (bp->tx_buf_ring == NULL) + return; + + for (i = 0; i < TX_DESC_CNT; ) { + struct sw_bd *tx_buf = &bp->tx_buf_ring[i]; + struct sk_buff *skb = tx_buf->skb; + int j, last; + + if (skb == NULL) { + i++; + continue; + } + + pci_unmap_single(bp->pdev, pci_unmap_addr(tx_buf, mapping), + skb_headlen(skb), PCI_DMA_TODEVICE); + + tx_buf->skb = NULL; + + last = skb_shinfo(skb)->nr_frags; + for (j = 0; j < last; j++) { + tx_buf = &bp->tx_buf_ring[i + j + 1]; + pci_unmap_page(bp->pdev, + pci_unmap_addr(tx_buf, mapping), + skb_shinfo(skb)->frags[j].size, + PCI_DMA_TODEVICE); + } + dev_kfree_skb_any(skb); + i += j + 1; + } + +} + +static void +bnx2_free_rx_skbs(struct bnx2 *bp) +{ + int i; + + if (bp->rx_buf_ring == NULL) + return; + + for (i = 0; i < RX_DESC_CNT; i++) { + struct sw_bd *rx_buf = &bp->rx_buf_ring[i]; + struct sk_buff *skb = rx_buf->skb; + + if (skb == 0) + continue; + + pci_unmap_single(bp->pdev, pci_unmap_addr(rx_buf, mapping), + bp->rx_buf_use_size, PCI_DMA_FROMDEVICE); + + rx_buf->skb = NULL; + + dev_kfree_skb_any(skb); + } +} + +static void +bnx2_free_skbs(struct bnx2 *bp) +{ + bnx2_free_tx_skbs(bp); + bnx2_free_rx_skbs(bp); +} + +static int +bnx2_reset_nic(struct bnx2 *bp, u32 reset_code) +{ + int rc; + + rc = bnx2_reset_chip(bp, reset_code); + bnx2_free_skbs(bp); + if (rc) + return rc; + + bnx2_init_chip(bp); + bnx2_init_tx_ring(bp); + bnx2_init_rx_ring(bp); + return 0; +} + +static int +bnx2_init_nic(struct bnx2 *bp) +{ + int rc; + + if ((rc = bnx2_reset_nic(bp, BNX2_DRV_MSG_CODE_RESET)) != 0) + return rc; + + bnx2_init_phy(bp); + bnx2_set_link(bp); + return 0; +} + +static int +bnx2_test_registers(struct bnx2 *bp) +{ + int ret; + int i; + static struct { + u16 offset; + u16 flags; + u32 rw_mask; + u32 ro_mask; + } reg_tbl[] = { + { 0x006c, 0, 0x00000000, 0x0000003f }, + { 0x0090, 0, 0xffffffff, 0x00000000 }, + { 0x0094, 0, 0x00000000, 0x00000000 }, + + { 0x0404, 0, 0x00003f00, 0x00000000 }, + { 0x0418, 0, 0x00000000, 0xffffffff }, + { 0x041c, 0, 0x00000000, 0xffffffff }, + { 0x0420, 0, 0x00000000, 0x80ffffff }, + { 0x0424, 0, 0x00000000, 0x00000000 }, + { 0x0428, 0, 0x00000000, 0x00000001 }, + { 0x0450, 0, 0x00000000, 0x0000ffff }, + { 0x0454, 0, 0x00000000, 0xffffffff }, + { 0x0458, 0, 0x00000000, 0xffffffff }, + + { 0x0808, 0, 0x00000000, 0xffffffff }, + { 0x0854, 0, 0x00000000, 0xffffffff }, + { 0x0868, 0, 0x00000000, 0x77777777 }, + { 0x086c, 0, 0x00000000, 0x77777777 }, + { 0x0870, 0, 0x00000000, 0x77777777 }, + { 0x0874, 0, 0x00000000, 0x77777777 }, + + { 0x0c00, 0, 0x00000000, 0x00000001 }, + { 0x0c04, 0, 0x00000000, 0x03ff0001 }, + { 0x0c08, 0, 0x0f0ff073, 0x00000000 }, + { 0x0c0c, 0, 0x00ffffff, 0x00000000 }, + { 0x0c30, 0, 0x00000000, 0xffffffff }, + { 0x0c34, 0, 0x00000000, 0xffffffff }, + { 0x0c38, 0, 0x00000000, 0xffffffff }, + { 0x0c3c, 0, 0x00000000, 0xffffffff }, + { 0x0c40, 0, 0x00000000, 0xffffffff }, + { 0x0c44, 0, 0x00000000, 0xffffffff }, + { 0x0c48, 0, 0x00000000, 0x0007ffff }, + { 0x0c4c, 0, 0x00000000, 0xffffffff }, + { 0x0c50, 0, 0x00000000, 0xffffffff }, + { 0x0c54, 0, 0x00000000, 0xffffffff }, + { 0x0c58, 0, 0x00000000, 0xffffffff }, + { 0x0c5c, 0, 0x00000000, 0xffffffff }, + { 0x0c60, 0, 0x00000000, 0xffffffff }, + { 0x0c64, 0, 0x00000000, 0xffffffff }, + { 0x0c68, 0, 0x00000000, 0xffffffff }, + { 0x0c6c, 0, 0x00000000, 0xffffffff }, + { 0x0c70, 0, 0x00000000, 0xffffffff }, + { 0x0c74, 0, 0x00000000, 0xffffffff }, + { 0x0c78, 0, 0x00000000, 0xffffffff }, + { 0x0c7c, 0, 0x00000000, 0xffffffff }, + { 0x0c80, 0, 0x00000000, 0xffffffff }, + { 0x0c84, 0, 0x00000000, 0xffffffff }, + { 0x0c88, 0, 0x00000000, 0xffffffff }, + { 0x0c8c, 0, 0x00000000, 0xffffffff }, + { 0x0c90, 0, 0x00000000, 0xffffffff }, + { 0x0c94, 0, 0x00000000, 0xffffffff }, + { 0x0c98, 0, 0x00000000, 0xffffffff }, + { 0x0c9c, 0, 0x00000000, 0xffffffff }, + { 0x0ca0, 0, 0x00000000, 0xffffffff }, + { 0x0ca4, 0, 0x00000000, 0xffffffff }, + { 0x0ca8, 0, 0x00000000, 0x0007ffff }, + { 0x0cac, 0, 0x00000000, 0xffffffff }, + { 0x0cb0, 0, 0x00000000, 0xffffffff }, + { 0x0cb4, 0, 0x00000000, 0xffffffff }, + { 0x0cb8, 0, 0x00000000, 0xffffffff }, + { 0x0cbc, 0, 0x00000000, 0xffffffff }, + { 0x0cc0, 0, 0x00000000, 0xffffffff }, + { 0x0cc4, 0, 0x00000000, 0xffffffff }, + { 0x0cc8, 0, 0x00000000, 0xffffffff }, + { 0x0ccc, 0, 0x00000000, 0xffffffff }, + { 0x0cd0, 0, 0x00000000, 0xffffffff }, + { 0x0cd4, 0, 0x00000000, 0xffffffff }, + { 0x0cd8, 0, 0x00000000, 0xffffffff }, + { 0x0cdc, 0, 0x00000000, 0xffffffff }, + { 0x0ce0, 0, 0x00000000, 0xffffffff }, + { 0x0ce4, 0, 0x00000000, 0xffffffff }, + { 0x0ce8, 0, 0x00000000, 0xffffffff }, + { 0x0cec, 0, 0x00000000, 0xffffffff }, + { 0x0cf0, 0, 0x00000000, 0xffffffff }, + { 0x0cf4, 0, 0x00000000, 0xffffffff }, + { 0x0cf8, 0, 0x00000000, 0xffffffff }, + { 0x0cfc, 0, 0x00000000, 0xffffffff }, + { 0x0d00, 0, 0x00000000, 0xffffffff }, + { 0x0d04, 0, 0x00000000, 0xffffffff }, + + { 0x1000, 0, 0x00000000, 0x00000001 }, + { 0x1004, 0, 0x00000000, 0x000f0001 }, + { 0x1044, 0, 0x00000000, 0xffc003ff }, + { 0x1080, 0, 0x00000000, 0x0001ffff }, + { 0x1084, 0, 0x00000000, 0xffffffff }, + { 0x1088, 0, 0x00000000, 0xffffffff }, + { 0x108c, 0, 0x00000000, 0xffffffff }, + { 0x1090, 0, 0x00000000, 0xffffffff }, + { 0x1094, 0, 0x00000000, 0xffffffff }, + { 0x1098, 0, 0x00000000, 0xffffffff }, + { 0x109c, 0, 0x00000000, 0xffffffff }, + { 0x10a0, 0, 0x00000000, 0xffffffff }, + + { 0x1408, 0, 0x01c00800, 0x00000000 }, + { 0x149c, 0, 0x8000ffff, 0x00000000 }, + { 0x14a8, 0, 0x00000000, 0x000001ff }, + { 0x14ac, 0, 0x4fffffff, 0x10000000 }, + { 0x14b0, 0, 0x00000002, 0x00000001 }, + { 0x14b8, 0, 0x00000000, 0x00000000 }, + { 0x14c0, 0, 0x00000000, 0x00000009 }, + { 0x14c4, 0, 0x00003fff, 0x00000000 }, + { 0x14cc, 0, 0x00000000, 0x00000001 }, + { 0x14d0, 0, 0xffffffff, 0x00000000 }, + { 0x1500, 0, 0x00000000, 0xffffffff }, + { 0x1504, 0, 0x00000000, 0xffffffff }, + { 0x1508, 0, 0x00000000, 0xffffffff }, + { 0x150c, 0, 0x00000000, 0xffffffff }, + { 0x1510, 0, 0x00000000, 0xffffffff }, + { 0x1514, 0, 0x00000000, 0xffffffff }, + { 0x1518, 0, 0x00000000, 0xffffffff }, + { 0x151c, 0, 0x00000000, 0xffffffff }, + { 0x1520, 0, 0x00000000, 0xffffffff }, + { 0x1524, 0, 0x00000000, 0xffffffff }, + { 0x1528, 0, 0x00000000, 0xffffffff }, + { 0x152c, 0, 0x00000000, 0xffffffff }, + { 0x1530, 0, 0x00000000, 0xffffffff }, + { 0x1534, 0, 0x00000000, 0xffffffff }, + { 0x1538, 0, 0x00000000, 0xffffffff }, + { 0x153c, 0, 0x00000000, 0xffffffff }, + { 0x1540, 0, 0x00000000, 0xffffffff }, + { 0x1544, 0, 0x00000000, 0xffffffff }, + { 0x1548, 0, 0x00000000, 0xffffffff }, + { 0x154c, 0, 0x00000000, 0xffffffff }, + { 0x1550, 0, 0x00000000, 0xffffffff }, + { 0x1554, 0, 0x00000000, 0xffffffff }, + { 0x1558, 0, 0x00000000, 0xffffffff }, + { 0x1600, 0, 0x00000000, 0xffffffff }, + { 0x1604, 0, 0x00000000, 0xffffffff }, + { 0x1608, 0, 0x00000000, 0xffffffff }, + { 0x160c, 0, 0x00000000, 0xffffffff }, + { 0x1610, 0, 0x00000000, 0xffffffff }, + { 0x1614, 0, 0x00000000, 0xffffffff }, + { 0x1618, 0, 0x00000000, 0xffffffff }, + { 0x161c, 0, 0x00000000, 0xffffffff }, + { 0x1620, 0, 0x00000000, 0xffffffff }, + { 0x1624, 0, 0x00000000, 0xffffffff }, + { 0x1628, 0, 0x00000000, 0xffffffff }, + { 0x162c, 0, 0x00000000, 0xffffffff }, + { 0x1630, 0, 0x00000000, 0xffffffff }, + { 0x1634, 0, 0x00000000, 0xffffffff }, + { 0x1638, 0, 0x00000000, 0xffffffff }, + { 0x163c, 0, 0x00000000, 0xffffffff }, + { 0x1640, 0, 0x00000000, 0xffffffff }, + { 0x1644, 0, 0x00000000, 0xffffffff }, + { 0x1648, 0, 0x00000000, 0xffffffff }, + { 0x164c, 0, 0x00000000, 0xffffffff }, + { 0x1650, 0, 0x00000000, 0xffffffff }, + { 0x1654, 0, 0x00000000, 0xffffffff }, + + { 0x1800, 0, 0x00000000, 0x00000001 }, + { 0x1804, 0, 0x00000000, 0x00000003 }, + { 0x1840, 0, 0x00000000, 0xffffffff }, + { 0x1844, 0, 0x00000000, 0xffffffff }, + { 0x1848, 0, 0x00000000, 0xffffffff }, + { 0x184c, 0, 0x00000000, 0xffffffff }, + { 0x1850, 0, 0x00000000, 0xffffffff }, + { 0x1900, 0, 0x7ffbffff, 0x00000000 }, + { 0x1904, 0, 0xffffffff, 0x00000000 }, + { 0x190c, 0, 0xffffffff, 0x00000000 }, + { 0x1914, 0, 0xffffffff, 0x00000000 }, + { 0x191c, 0, 0xffffffff, 0x00000000 }, + { 0x1924, 0, 0xffffffff, 0x00000000 }, + { 0x192c, 0, 0xffffffff, 0x00000000 }, + { 0x1934, 0, 0xffffffff, 0x00000000 }, + { 0x193c, 0, 0xffffffff, 0x00000000 }, + { 0x1944, 0, 0xffffffff, 0x00000000 }, + { 0x194c, 0, 0xffffffff, 0x00000000 }, + { 0x1954, 0, 0xffffffff, 0x00000000 }, + { 0x195c, 0, 0xffffffff, 0x00000000 }, + { 0x1964, 0, 0xffffffff, 0x00000000 }, + { 0x196c, 0, 0xffffffff, 0x00000000 }, + { 0x1974, 0, 0xffffffff, 0x00000000 }, + { 0x197c, 0, 0xffffffff, 0x00000000 }, + { 0x1980, 0, 0x0700ffff, 0x00000000 }, + + { 0x1c00, 0, 0x00000000, 0x00000001 }, + { 0x1c04, 0, 0x00000000, 0x00000003 }, + { 0x1c08, 0, 0x0000000f, 0x00000000 }, + { 0x1c40, 0, 0x00000000, 0xffffffff }, + { 0x1c44, 0, 0x00000000, 0xffffffff }, + { 0x1c48, 0, 0x00000000, 0xffffffff }, + { 0x1c4c, 0, 0x00000000, 0xffffffff }, + { 0x1c50, 0, 0x00000000, 0xffffffff }, + { 0x1d00, 0, 0x7ffbffff, 0x00000000 }, + { 0x1d04, 0, 0xffffffff, 0x00000000 }, + { 0x1d0c, 0, 0xffffffff, 0x00000000 }, + { 0x1d14, 0, 0xffffffff, 0x00000000 }, + { 0x1d1c, 0, 0xffffffff, 0x00000000 }, + { 0x1d24, 0, 0xffffffff, 0x00000000 }, + { 0x1d2c, 0, 0xffffffff, 0x00000000 }, + { 0x1d34, 0, 0xffffffff, 0x00000000 }, + { 0x1d3c, 0, 0xffffffff, 0x00000000 }, + { 0x1d44, 0, 0xffffffff, 0x00000000 }, + { 0x1d4c, 0, 0xffffffff, 0x00000000 }, + { 0x1d54, 0, 0xffffffff, 0x00000000 }, + { 0x1d5c, 0, 0xffffffff, 0x00000000 }, + { 0x1d64, 0, 0xffffffff, 0x00000000 }, + { 0x1d6c, 0, 0xffffffff, 0x00000000 }, + { 0x1d74, 0, 0xffffffff, 0x00000000 }, + { 0x1d7c, 0, 0xffffffff, 0x00000000 }, + { 0x1d80, 0, 0x0700ffff, 0x00000000 }, + + { 0x2004, 0, 0x00000000, 0x0337000f }, + { 0x2008, 0, 0xffffffff, 0x00000000 }, + { 0x200c, 0, 0xffffffff, 0x00000000 }, + { 0x2010, 0, 0xffffffff, 0x00000000 }, + { 0x2014, 0, 0x801fff80, 0x00000000 }, + { 0x2018, 0, 0x000003ff, 0x00000000 }, + + { 0x2800, 0, 0x00000000, 0x00000001 }, + { 0x2804, 0, 0x00000000, 0x00003f01 }, + { 0x2808, 0, 0x0f3f3f03, 0x00000000 }, + { 0x2810, 0, 0xffff0000, 0x00000000 }, + { 0x2814, 0, 0xffff0000, 0x00000000 }, + { 0x2818, 0, 0xffff0000, 0x00000000 }, + { 0x281c, 0, 0xffff0000, 0x00000000 }, + { 0x2834, 0, 0xffffffff, 0x00000000 }, + { 0x2840, 0, 0x00000000, 0xffffffff }, + { 0x2844, 0, 0x00000000, 0xffffffff }, + { 0x2848, 0, 0xffffffff, 0x00000000 }, + { 0x284c, 0, 0xf800f800, 0x07ff07ff }, + + { 0x2c00, 0, 0x00000000, 0x00000011 }, + { 0x2c04, 0, 0x00000000, 0x00030007 }, + + { 0x3000, 0, 0x00000000, 0x00000001 }, + { 0x3004, 0, 0x00000000, 0x007007ff }, + { 0x3008, 0, 0x00000003, 0x00000000 }, + { 0x300c, 0, 0xffffffff, 0x00000000 }, + { 0x3010, 0, 0xffffffff, 0x00000000 }, + { 0x3014, 0, 0xffffffff, 0x00000000 }, + { 0x3034, 0, 0xffffffff, 0x00000000 }, + { 0x3038, 0, 0xffffffff, 0x00000000 }, + { 0x3050, 0, 0x00000001, 0x00000000 }, + + { 0x3c00, 0, 0x00000000, 0x00000001 }, + { 0x3c04, 0, 0x00000000, 0x00070000 }, + { 0x3c08, 0, 0x00007f71, 0x07f00000 }, + { 0x3c0c, 0, 0x1f3ffffc, 0x00000000 }, + { 0x3c10, 0, 0xffffffff, 0x00000000 }, + { 0x3c14, 0, 0x00000000, 0xffffffff }, + { 0x3c18, 0, 0x00000000, 0xffffffff }, + { 0x3c1c, 0, 0xfffff000, 0x00000000 }, + { 0x3c20, 0, 0xffffff00, 0x00000000 }, + { 0x3c24, 0, 0xffffffff, 0x00000000 }, + { 0x3c28, 0, 0xffffffff, 0x00000000 }, + { 0x3c2c, 0, 0xffffffff, 0x00000000 }, + { 0x3c30, 0, 0xffffffff, 0x00000000 }, + { 0x3c34, 0, 0xffffffff, 0x00000000 }, + { 0x3c38, 0, 0xffffffff, 0x00000000 }, + { 0x3c3c, 0, 0xffffffff, 0x00000000 }, + { 0x3c40, 0, 0xffffffff, 0x00000000 }, + { 0x3c44, 0, 0xffffffff, 0x00000000 }, + { 0x3c48, 0, 0xffffffff, 0x00000000 }, + { 0x3c4c, 0, 0xffffffff, 0x00000000 }, + { 0x3c50, 0, 0xffffffff, 0x00000000 }, + { 0x3c54, 0, 0xffffffff, 0x00000000 }, + { 0x3c58, 0, 0xffffffff, 0x00000000 }, + { 0x3c5c, 0, 0xffffffff, 0x00000000 }, + { 0x3c60, 0, 0xffffffff, 0x00000000 }, + { 0x3c64, 0, 0xffffffff, 0x00000000 }, + { 0x3c68, 0, 0xffffffff, 0x00000000 }, + { 0x3c6c, 0, 0xffffffff, 0x00000000 }, + { 0x3c70, 0, 0xffffffff, 0x00000000 }, + { 0x3c74, 0, 0x0000003f, 0x00000000 }, + { 0x3c78, 0, 0x00000000, 0x00000000 }, + { 0x3c7c, 0, 0x00000000, 0x00000000 }, + { 0x3c80, 0, 0x3fffffff, 0x00000000 }, + { 0x3c84, 0, 0x0000003f, 0x00000000 }, + { 0x3c88, 0, 0x00000000, 0xffffffff }, + { 0x3c8c, 0, 0x00000000, 0xffffffff }, + + { 0x4000, 0, 0x00000000, 0x00000001 }, + { 0x4004, 0, 0x00000000, 0x00030000 }, + { 0x4008, 0, 0x00000ff0, 0x00000000 }, + { 0x400c, 0, 0xffffffff, 0x00000000 }, + { 0x4088, 0, 0x00000000, 0x00070303 }, + + { 0x4400, 0, 0x00000000, 0x00000001 }, + { 0x4404, 0, 0x00000000, 0x00003f01 }, + { 0x4408, 0, 0x7fff00ff, 0x00000000 }, + { 0x440c, 0, 0xffffffff, 0x00000000 }, + { 0x4410, 0, 0xffff, 0x0000 }, + { 0x4414, 0, 0xffff, 0x0000 }, + { 0x4418, 0, 0xffff, 0x0000 }, + { 0x441c, 0, 0xffff, 0x0000 }, + { 0x4428, 0, 0xffffffff, 0x00000000 }, + { 0x442c, 0, 0xffffffff, 0x00000000 }, + { 0x4430, 0, 0xffffffff, 0x00000000 }, + { 0x4434, 0, 0xffffffff, 0x00000000 }, + { 0x4438, 0, 0xffffffff, 0x00000000 }, + { 0x443c, 0, 0xffffffff, 0x00000000 }, + { 0x4440, 0, 0xffffffff, 0x00000000 }, + { 0x4444, 0, 0xffffffff, 0x00000000 }, + + { 0x4c00, 0, 0x00000000, 0x00000001 }, + { 0x4c04, 0, 0x00000000, 0x0000003f }, + { 0x4c08, 0, 0xffffffff, 0x00000000 }, + { 0x4c0c, 0, 0x0007fc00, 0x00000000 }, + { 0x4c10, 0, 0x80003fe0, 0x00000000 }, + { 0x4c14, 0, 0xffffffff, 0x00000000 }, + { 0x4c44, 0, 0x00000000, 0x9fff9fff }, + { 0x4c48, 0, 0x00000000, 0xb3009fff }, + { 0x4c4c, 0, 0x00000000, 0x77f33b30 }, + { 0x4c50, 0, 0x00000000, 0xffffffff }, + + { 0x5004, 0, 0x00000000, 0x0000007f }, + { 0x5008, 0, 0x0f0007ff, 0x00000000 }, + { 0x500c, 0, 0xf800f800, 0x07ff07ff }, + + { 0x5400, 0, 0x00000008, 0x00000001 }, + { 0x5404, 0, 0x00000000, 0x0000003f }, + { 0x5408, 0, 0x0000001f, 0x00000000 }, + { 0x540c, 0, 0xffffffff, 0x00000000 }, + { 0x5410, 0, 0xffffffff, 0x00000000 }, + { 0x5414, 0, 0x0000ffff, 0x00000000 }, + { 0x5418, 0, 0x0000ffff, 0x00000000 }, + { 0x541c, 0, 0x0000ffff, 0x00000000 }, + { 0x5420, 0, 0x0000ffff, 0x00000000 }, + { 0x5428, 0, 0x000000ff, 0x00000000 }, + { 0x542c, 0, 0xff00ffff, 0x00000000 }, + { 0x5430, 0, 0x001fff80, 0x00000000 }, + { 0x5438, 0, 0xffffffff, 0x00000000 }, + { 0x543c, 0, 0xffffffff, 0x00000000 }, + { 0x5440, 0, 0xf800f800, 0x07ff07ff }, + + { 0x5c00, 0, 0x00000000, 0x00000001 }, + { 0x5c04, 0, 0x00000000, 0x0003000f }, + { 0x5c08, 0, 0x00000003, 0x00000000 }, + { 0x5c0c, 0, 0x0000fff8, 0x00000000 }, + { 0x5c10, 0, 0x00000000, 0xffffffff }, + { 0x5c80, 0, 0x00000000, 0x0f7113f1 }, + { 0x5c84, 0, 0x00000000, 0x0000f333 }, + { 0x5c88, 0, 0x00000000, 0x00077373 }, + { 0x5c8c, 0, 0x00000000, 0x0007f737 }, + + { 0x6808, 0, 0x0000ff7f, 0x00000000 }, + { 0x680c, 0, 0xffffffff, 0x00000000 }, + { 0x6810, 0, 0xffffffff, 0x00000000 }, + { 0x6814, 0, 0xffffffff, 0x00000000 }, + { 0x6818, 0, 0xffffffff, 0x00000000 }, + { 0x681c, 0, 0xffffffff, 0x00000000 }, + { 0x6820, 0, 0x00ff00ff, 0x00000000 }, + { 0x6824, 0, 0x00ff00ff, 0x00000000 }, + { 0x6828, 0, 0x00ff00ff, 0x00000000 }, + { 0x682c, 0, 0x03ff03ff, 0x00000000 }, + { 0x6830, 0, 0x03ff03ff, 0x00000000 }, + { 0x6834, 0, 0x03ff03ff, 0x00000000 }, + { 0x6838, 0, 0x03ff03ff, 0x00000000 }, + { 0x683c, 0, 0x0000ffff, 0x00000000 }, + { 0x6840, 0, 0x00000ff0, 0x00000000 }, + { 0x6844, 0, 0x00ffff00, 0x00000000 }, + { 0x684c, 0, 0xffffffff, 0x00000000 }, + { 0x6850, 0, 0x7f7f7f7f, 0x00000000 }, + { 0x6854, 0, 0x7f7f7f7f, 0x00000000 }, + { 0x6858, 0, 0x7f7f7f7f, 0x00000000 }, + { 0x685c, 0, 0x7f7f7f7f, 0x00000000 }, + { 0x6908, 0, 0x00000000, 0x0001ff0f }, + { 0x690c, 0, 0x00000000, 0x0ffe00f0 }, + + { 0xffff, 0, 0x00000000, 0x00000000 }, + }; + + ret = 0; + for (i = 0; reg_tbl[i].offset != 0xffff; i++) { + u32 offset, rw_mask, ro_mask, save_val, val; + + offset = (u32) reg_tbl[i].offset; + rw_mask = reg_tbl[i].rw_mask; + ro_mask = reg_tbl[i].ro_mask; + + save_val = readl((u8 *) bp->regview + offset); + + writel(0, (u8 *) bp->regview + offset); + + val = readl((u8 *) bp->regview + offset); + if ((val & rw_mask) != 0) { + goto reg_test_err; + } + + if ((val & ro_mask) != (save_val & ro_mask)) { + goto reg_test_err; + } + + writel(0xffffffff, (u8 *) bp->regview + offset); + + val = readl((u8 *) bp->regview + offset); + if ((val & rw_mask) != rw_mask) { + goto reg_test_err; + } + + if ((val & ro_mask) != (save_val & ro_mask)) { + goto reg_test_err; + } + + writel(save_val, (u8 *) bp->regview + offset); + continue; + +reg_test_err: + writel(save_val, (u8 *) bp->regview + offset); + ret = -ENODEV; + break; + } + return ret; +} + +static int +bnx2_do_mem_test(struct bnx2 *bp, u32 start, u32 size) +{ + static u32 test_pattern[] = { 0x00000000, 0xffffffff, 0x55555555, + 0xaaaaaaaa , 0xaa55aa55, 0x55aa55aa }; + int i; + + for (i = 0; i < sizeof(test_pattern) / 4; i++) { + u32 offset; + + for (offset = 0; offset < size; offset += 4) { + + REG_WR_IND(bp, start + offset, test_pattern[i]); + + if (REG_RD_IND(bp, start + offset) != + test_pattern[i]) { + return -ENODEV; + } + } + } + return 0; +} + +static int +bnx2_test_memory(struct bnx2 *bp) +{ + int ret = 0; + int i; + static struct { + u32 offset; + u32 len; + } mem_tbl[] = { + { 0x60000, 0x4000 }, + { 0xa0000, 0x4000 }, + { 0xe0000, 0x4000 }, + { 0x120000, 0x4000 }, + { 0x1a0000, 0x4000 }, + { 0x160000, 0x4000 }, + { 0xffffffff, 0 }, + }; + + for (i = 0; mem_tbl[i].offset != 0xffffffff; i++) { + if ((ret = bnx2_do_mem_test(bp, mem_tbl[i].offset, + mem_tbl[i].len)) != 0) { + return ret; + } + } + + return ret; +} + +static int +bnx2_test_loopback(struct bnx2 *bp) +{ + unsigned int pkt_size, num_pkts, i; + struct sk_buff *skb, *rx_skb; + unsigned char *packet; + u16 rx_start_idx, rx_idx, send_idx; + u32 send_bseq, val; + dma_addr_t map; + struct tx_bd *txbd; + struct sw_bd *rx_buf; + struct l2_fhdr *rx_hdr; + int ret = -ENODEV; + + if (!netif_running(bp->dev)) + return -ENODEV; + + bp->loopback = MAC_LOOPBACK; + bnx2_reset_nic(bp, BNX2_DRV_MSG_CODE_DIAG); + bnx2_set_mac_loopback(bp); + + pkt_size = 1514; + skb = dev_alloc_skb(pkt_size); + packet = skb_put(skb, pkt_size); + memcpy(packet, bp->mac_addr, 6); + memset(packet + 6, 0x0, 8); + for (i = 14; i < pkt_size; i++) + packet[i] = (unsigned char) (i & 0xff); + + map = pci_map_single(bp->pdev, skb->data, pkt_size, + PCI_DMA_TODEVICE); + + val = REG_RD(bp, BNX2_HC_COMMAND); + REG_WR(bp, BNX2_HC_COMMAND, val | BNX2_HC_COMMAND_COAL_NOW_WO_INT); + REG_RD(bp, BNX2_HC_COMMAND); + + udelay(5); + rx_start_idx = bp->status_blk->status_rx_quick_consumer_index0; + + send_idx = 0; + send_bseq = 0; + num_pkts = 0; + + txbd = &bp->tx_desc_ring[send_idx]; + + txbd->tx_bd_haddr_hi = (u64) map >> 32; + txbd->tx_bd_haddr_lo = (u64) map & 0xffffffff; + txbd->tx_bd_mss_nbytes = pkt_size; + txbd->tx_bd_vlan_tag_flags = TX_BD_FLAGS_START | TX_BD_FLAGS_END; + + num_pkts++; + send_idx = NEXT_TX_BD(send_idx); + + send_bseq += pkt_size; + + REG_WR16(bp, MB_TX_CID_ADDR + BNX2_L2CTX_TX_HOST_BIDX, send_idx); + REG_WR(bp, MB_TX_CID_ADDR + BNX2_L2CTX_TX_HOST_BSEQ, send_bseq); + + + udelay(100); + + val = REG_RD(bp, BNX2_HC_COMMAND); + REG_WR(bp, BNX2_HC_COMMAND, val | BNX2_HC_COMMAND_COAL_NOW_WO_INT); + REG_RD(bp, BNX2_HC_COMMAND); + + udelay(5); + + pci_unmap_single(bp->pdev, map, pkt_size, PCI_DMA_TODEVICE); + dev_kfree_skb_irq(skb); + + if (bp->status_blk->status_tx_quick_consumer_index0 != send_idx) { + goto loopback_test_done; + } + + rx_idx = bp->status_blk->status_rx_quick_consumer_index0; + if (rx_idx != rx_start_idx + num_pkts) { + goto loopback_test_done; + } + + rx_buf = &bp->rx_buf_ring[rx_start_idx]; + rx_skb = rx_buf->skb; + + rx_hdr = (struct l2_fhdr *) rx_skb->data; + skb_reserve(rx_skb, bp->rx_offset); + + pci_dma_sync_single_for_cpu(bp->pdev, + pci_unmap_addr(rx_buf, mapping), + bp->rx_buf_size, PCI_DMA_FROMDEVICE); + + if (rx_hdr->l2_fhdr_errors & + (L2_FHDR_ERRORS_BAD_CRC | + L2_FHDR_ERRORS_PHY_DECODE | + L2_FHDR_ERRORS_ALIGNMENT | + L2_FHDR_ERRORS_TOO_SHORT | + L2_FHDR_ERRORS_GIANT_FRAME)) { + + goto loopback_test_done; + } + + if ((rx_hdr->l2_fhdr_pkt_len - 4) != pkt_size) { + goto loopback_test_done; + } + + for (i = 14; i < pkt_size; i++) { + if (*(rx_skb->data + i) != (unsigned char) (i & 0xff)) { + goto loopback_test_done; + } + } + + ret = 0; + +loopback_test_done: + bp->loopback = 0; + return ret; +} + +#define NVRAM_SIZE 0x200 +#define CRC32_RESIDUAL 0xdebb20e3 + +static int +bnx2_test_nvram(struct bnx2 *bp) +{ + u32 buf[NVRAM_SIZE / 4]; + u8 *data = (u8 *) buf; + int rc = 0; + u32 magic, csum; + + if ((rc = bnx2_nvram_read(bp, 0, data, 4)) != 0) + goto test_nvram_done; + + magic = be32_to_cpu(buf[0]); + if (magic != 0x669955aa) { + rc = -ENODEV; + goto test_nvram_done; + } + + if ((rc = bnx2_nvram_read(bp, 0x100, data, NVRAM_SIZE)) != 0) + goto test_nvram_done; + + csum = ether_crc_le(0x100, data); + if (csum != CRC32_RESIDUAL) { + rc = -ENODEV; + goto test_nvram_done; + } + + csum = ether_crc_le(0x100, data + 0x100); + if (csum != CRC32_RESIDUAL) { + rc = -ENODEV; + } + +test_nvram_done: + return rc; +} + +static int +bnx2_test_link(struct bnx2 *bp) +{ + u32 bmsr; + + spin_lock_irq(&bp->phy_lock); + bnx2_read_phy(bp, MII_BMSR, &bmsr); + bnx2_read_phy(bp, MII_BMSR, &bmsr); + spin_unlock_irq(&bp->phy_lock); + + if (bmsr & BMSR_LSTATUS) { + return 0; + } + return -ENODEV; +} + +static int +bnx2_test_intr(struct bnx2 *bp) +{ + int i; + u32 val; + u16 status_idx; + + if (!netif_running(bp->dev)) + return -ENODEV; + + status_idx = REG_RD(bp, BNX2_PCICFG_INT_ACK_CMD) & 0xffff; + + /* This register is not touched during run-time. */ + val = REG_RD(bp, BNX2_HC_COMMAND); + REG_WR(bp, BNX2_HC_COMMAND, val | BNX2_HC_COMMAND_COAL_NOW); + REG_RD(bp, BNX2_HC_COMMAND); + + for (i = 0; i < 10; i++) { + if ((REG_RD(bp, BNX2_PCICFG_INT_ACK_CMD) & 0xffff) != + status_idx) { + + break; + } + + msleep_interruptible(10); + } + if (i < 10) + return 0; + + return -ENODEV; +} + +static void +bnx2_timer(unsigned long data) +{ + struct bnx2 *bp = (struct bnx2 *) data; + u32 msg; + + if (atomic_read(&bp->intr_sem) != 0) + goto bnx2_restart_timer; + + msg = (u32) ++bp->fw_drv_pulse_wr_seq; + REG_WR_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_DRV_PULSE_MB, msg); + + if ((bp->phy_flags & PHY_SERDES_FLAG) && + (CHIP_NUM(bp) == CHIP_NUM_5706)) { + unsigned long flags; + + spin_lock_irqsave(&bp->phy_lock, flags); + if (bp->serdes_an_pending) { + bp->serdes_an_pending--; + } + else if ((bp->link_up == 0) && (bp->autoneg & AUTONEG_SPEED)) { + u32 bmcr; + + bnx2_read_phy(bp, MII_BMCR, &bmcr); + + if (bmcr & BMCR_ANENABLE) { + u32 phy1, phy2; + + bnx2_write_phy(bp, 0x1c, 0x7c00); + bnx2_read_phy(bp, 0x1c, &phy1); + + bnx2_write_phy(bp, 0x17, 0x0f01); + bnx2_read_phy(bp, 0x15, &phy2); + bnx2_write_phy(bp, 0x17, 0x0f01); + bnx2_read_phy(bp, 0x15, &phy2); + + if ((phy1 & 0x10) && /* SIGNAL DETECT */ + !(phy2 & 0x20)) { /* no CONFIG */ + + bmcr &= ~BMCR_ANENABLE; + bmcr |= BMCR_SPEED1000 | + BMCR_FULLDPLX; + bnx2_write_phy(bp, MII_BMCR, bmcr); + bp->phy_flags |= + PHY_PARALLEL_DETECT_FLAG; + } + } + } + else if ((bp->link_up) && (bp->autoneg & AUTONEG_SPEED) && + (bp->phy_flags & PHY_PARALLEL_DETECT_FLAG)) { + u32 phy2; + + bnx2_write_phy(bp, 0x17, 0x0f01); + bnx2_read_phy(bp, 0x15, &phy2); + if (phy2 & 0x20) { + u32 bmcr; + + bnx2_read_phy(bp, MII_BMCR, &bmcr); + bmcr |= BMCR_ANENABLE; + bnx2_write_phy(bp, MII_BMCR, bmcr); + + bp->phy_flags &= ~PHY_PARALLEL_DETECT_FLAG; + + } + } + + spin_unlock_irqrestore(&bp->phy_lock, flags); + } + +bnx2_restart_timer: + bp->timer.expires = RUN_AT(bp->timer_interval); + + add_timer(&bp->timer); +} + +/* Called with rtnl_lock */ +static int +bnx2_open(struct net_device *dev) +{ + struct bnx2 *bp = dev->priv; + int rc; + + bnx2_set_power_state(bp, 0); + bnx2_disable_int(bp); + + rc = bnx2_alloc_mem(bp); + if (rc) + return rc; + + if ((CHIP_ID(bp) != CHIP_ID_5706_A0) && + (CHIP_ID(bp) != CHIP_ID_5706_A1) && + !disable_msi) { + + if (pci_enable_msi(bp->pdev) == 0) { + bp->flags |= USING_MSI_FLAG; + rc = request_irq(bp->pdev->irq, bnx2_msi, 0, dev->name, + dev); + } + else { + rc = request_irq(bp->pdev->irq, bnx2_interrupt, + SA_SHIRQ, dev->name, dev); + } + } + else { + rc = request_irq(bp->pdev->irq, bnx2_interrupt, SA_SHIRQ, + dev->name, dev); + } + if (rc) { + bnx2_free_mem(bp); + return rc; + } + + rc = bnx2_init_nic(bp); + + if (rc) { + free_irq(bp->pdev->irq, dev); + if (bp->flags & USING_MSI_FLAG) { + pci_disable_msi(bp->pdev); + bp->flags &= ~USING_MSI_FLAG; + } + bnx2_free_skbs(bp); + bnx2_free_mem(bp); + return rc; + } + + init_timer(&bp->timer); + + bp->timer.expires = RUN_AT(bp->timer_interval); + bp->timer.data = (unsigned long) bp; + bp->timer.function = bnx2_timer; + add_timer(&bp->timer); + + atomic_set(&bp->intr_sem, 0); + + bnx2_enable_int(bp); + + if (bp->flags & USING_MSI_FLAG) { + /* Test MSI to make sure it is working + * If MSI test fails, go back to INTx mode + */ + if (bnx2_test_intr(bp) != 0) { + printk(KERN_WARNING PFX "%s: No interrupt was generated" + " using MSI, switching to INTx mode. Please" + " report this failure to the PCI maintainer" + " and include system chipset information.\n", + bp->dev->name); + + bnx2_disable_int(bp); + free_irq(bp->pdev->irq, dev); + pci_disable_msi(bp->pdev); + bp->flags &= ~USING_MSI_FLAG; + + rc = bnx2_init_nic(bp); + + if (!rc) { + rc = request_irq(bp->pdev->irq, bnx2_interrupt, + SA_SHIRQ, dev->name, dev); + } + if (rc) { + bnx2_free_skbs(bp); + bnx2_free_mem(bp); + del_timer_sync(&bp->timer); + return rc; + } + bnx2_enable_int(bp); + } + } + if (bp->flags & USING_MSI_FLAG) { + printk(KERN_INFO PFX "%s: using MSI\n", dev->name); + } + + netif_start_queue(dev); + + return 0; +} + +static void +bnx2_reset_task(void *data) +{ + struct bnx2 *bp = data; + + bnx2_netif_stop(bp); + + bnx2_init_nic(bp); + + atomic_set(&bp->intr_sem, 1); + bnx2_netif_start(bp); +} + +static void +bnx2_tx_timeout(struct net_device *dev) +{ + struct bnx2 *bp = dev->priv; + + /* This allows the netif to be shutdown gracefully before resetting */ + schedule_work(&bp->reset_task); +} + +#ifdef BCM_VLAN +/* Called with rtnl_lock */ +static void +bnx2_vlan_rx_register(struct net_device *dev, struct vlan_group *vlgrp) +{ + struct bnx2 *bp = dev->priv; + + bnx2_netif_stop(bp); + + bp->vlgrp = vlgrp; + bnx2_set_rx_mode(dev); + + bnx2_netif_start(bp); +} + +/* Called with rtnl_lock */ +static void +bnx2_vlan_rx_kill_vid(struct net_device *dev, uint16_t vid) +{ + struct bnx2 *bp = dev->priv; + + bnx2_netif_stop(bp); + + if (bp->vlgrp) + bp->vlgrp->vlan_devices[vid] = NULL; + bnx2_set_rx_mode(dev); + + bnx2_netif_start(bp); +} +#endif + +/* Called with dev->xmit_lock. + * hard_start_xmit is pseudo-lockless - a lock is only required when + * the tx queue is full. This way, we get the benefit of lockless + * operations most of the time without the complexities to handle + * netif_stop_queue/wake_queue race conditions. + */ +static int +bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct bnx2 *bp = dev->priv; + dma_addr_t mapping; + struct tx_bd *txbd; + struct sw_bd *tx_buf; + u32 len, vlan_tag_flags, last_frag, mss; + u16 prod, ring_prod; + int i; + + if (unlikely(atomic_read(&bp->tx_avail_bd) < + (skb_shinfo(skb)->nr_frags + 1))) { + + netif_stop_queue(dev); + printk(KERN_ERR PFX "%s: BUG! Tx ring full when queue awake!\n", + dev->name); + + return NETDEV_TX_BUSY; + } + len = skb_headlen(skb); + prod = bp->tx_prod; + ring_prod = TX_RING_IDX(prod); + + vlan_tag_flags = 0; + if (skb->ip_summed == CHECKSUM_HW) { + vlan_tag_flags |= TX_BD_FLAGS_TCP_UDP_CKSUM; + } + + if (bp->vlgrp != 0 && vlan_tx_tag_present(skb)) { + vlan_tag_flags |= + (TX_BD_FLAGS_VLAN_TAG | (vlan_tx_tag_get(skb) << 16)); + } +#ifdef BCM_TSO + if ((mss = skb_shinfo(skb)->tso_size) && + (skb->len > (bp->dev->mtu + ETH_HLEN))) { + u32 tcp_opt_len, ip_tcp_len; + + if (skb_header_cloned(skb) && + pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) { + dev_kfree_skb(skb); + return NETDEV_TX_OK; + } + + tcp_opt_len = ((skb->h.th->doff - 5) * 4); + vlan_tag_flags |= TX_BD_FLAGS_SW_LSO; + + tcp_opt_len = 0; + if (skb->h.th->doff > 5) { + tcp_opt_len = (skb->h.th->doff - 5) << 2; + } + ip_tcp_len = (skb->nh.iph->ihl << 2) + sizeof(struct tcphdr); + + skb->nh.iph->check = 0; + skb->nh.iph->tot_len = ntohs(mss + ip_tcp_len + tcp_opt_len); + skb->h.th->check = + ~csum_tcpudp_magic(skb->nh.iph->saddr, + skb->nh.iph->daddr, + 0, IPPROTO_TCP, 0); + + if (tcp_opt_len || (skb->nh.iph->ihl > 5)) { + vlan_tag_flags |= ((skb->nh.iph->ihl - 5) + + (tcp_opt_len >> 2)) << 8; + } + } + else +#endif + { + mss = 0; + } + + mapping = pci_map_single(bp->pdev, skb->data, len, PCI_DMA_TODEVICE); + + tx_buf = &bp->tx_buf_ring[ring_prod]; + tx_buf->skb = skb; + pci_unmap_addr_set(tx_buf, mapping, mapping); + + txbd = &bp->tx_desc_ring[ring_prod]; + + txbd->tx_bd_haddr_hi = (u64) mapping >> 32; + txbd->tx_bd_haddr_lo = (u64) mapping & 0xffffffff; + txbd->tx_bd_mss_nbytes = len | (mss << 16); + txbd->tx_bd_vlan_tag_flags = vlan_tag_flags | TX_BD_FLAGS_START; + + last_frag = skb_shinfo(skb)->nr_frags; + + for (i = 0; i < last_frag; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + + prod = NEXT_TX_BD(prod); + ring_prod = TX_RING_IDX(prod); + txbd = &bp->tx_desc_ring[ring_prod]; + + len = frag->size; + mapping = pci_map_page(bp->pdev, frag->page, frag->page_offset, + len, PCI_DMA_TODEVICE); + pci_unmap_addr_set(&bp->tx_buf_ring[ring_prod], + mapping, mapping); + + txbd->tx_bd_haddr_hi = (u64) mapping >> 32; + txbd->tx_bd_haddr_lo = (u64) mapping & 0xffffffff; + txbd->tx_bd_mss_nbytes = len | (mss << 16); + txbd->tx_bd_vlan_tag_flags = vlan_tag_flags; + + } + txbd->tx_bd_vlan_tag_flags |= TX_BD_FLAGS_END; + + prod = NEXT_TX_BD(prod); + bp->tx_prod_bseq += skb->len; + + atomic_sub(last_frag + 1, &bp->tx_avail_bd); + + REG_WR16(bp, MB_TX_CID_ADDR + BNX2_L2CTX_TX_HOST_BIDX, prod); + REG_WR(bp, MB_TX_CID_ADDR + BNX2_L2CTX_TX_HOST_BSEQ, bp->tx_prod_bseq); + + mmiowb(); + + bp->tx_prod = prod; + dev->trans_start = jiffies; + + if (unlikely(atomic_read(&bp->tx_avail_bd) <= MAX_SKB_FRAGS)) { + unsigned long flags; + + spin_lock_irqsave(&bp->tx_lock, flags); + if (atomic_read(&bp->tx_avail_bd) <= MAX_SKB_FRAGS) { + netif_stop_queue(dev); + + if (atomic_read(&bp->tx_avail_bd) > MAX_SKB_FRAGS) + netif_wake_queue(dev); + } + spin_unlock_irqrestore(&bp->tx_lock, flags); + } + + return NETDEV_TX_OK; +} + +/* Called with rtnl_lock */ +static int +bnx2_close(struct net_device *dev) +{ + struct bnx2 *bp = dev->priv; + u32 reset_code; + + flush_scheduled_work(); + bnx2_netif_stop(bp); + del_timer_sync(&bp->timer); + if (bp->wol) + reset_code = BNX2_DRV_MSG_CODE_SUSPEND_WOL; + else + reset_code = BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL; + bnx2_reset_chip(bp, reset_code); + free_irq(bp->pdev->irq, dev); + if (bp->flags & USING_MSI_FLAG) { + pci_disable_msi(bp->pdev); + bp->flags &= ~USING_MSI_FLAG; + } + bnx2_free_skbs(bp); + bnx2_free_mem(bp); + bp->link_up = 0; + netif_carrier_off(bp->dev); + bnx2_set_power_state(bp, 3); + return 0; +} + +#define GET_NET_STATS64(ctr) \ + (unsigned long) ((unsigned long) (ctr##_hi) << 32) + \ + (unsigned long) (ctr##_lo) + +#define GET_NET_STATS32(ctr) \ + (ctr##_lo) + +#if (BITS_PER_LONG == 64) +#define GET_NET_STATS GET_NET_STATS64 +#else +#define GET_NET_STATS GET_NET_STATS32 +#endif + +static struct net_device_stats * +bnx2_get_stats(struct net_device *dev) +{ + struct bnx2 *bp = dev->priv; + struct statistics_block *stats_blk = bp->stats_blk; + struct net_device_stats *net_stats = &bp->net_stats; + + if (bp->stats_blk == NULL) { + return net_stats; + } + net_stats->rx_packets = + GET_NET_STATS(stats_blk->stat_IfHCInUcastPkts) + + GET_NET_STATS(stats_blk->stat_IfHCInMulticastPkts) + + GET_NET_STATS(stats_blk->stat_IfHCInBroadcastPkts); + + net_stats->tx_packets = + GET_NET_STATS(stats_blk->stat_IfHCOutUcastPkts) + + GET_NET_STATS(stats_blk->stat_IfHCOutMulticastPkts) + + GET_NET_STATS(stats_blk->stat_IfHCOutBroadcastPkts); + + net_stats->rx_bytes = + GET_NET_STATS(stats_blk->stat_IfHCInOctets); + + net_stats->tx_bytes = + GET_NET_STATS(stats_blk->stat_IfHCOutOctets); + + net_stats->multicast = + GET_NET_STATS(stats_blk->stat_IfHCOutMulticastPkts); + + net_stats->collisions = + (unsigned long) stats_blk->stat_EtherStatsCollisions; + + net_stats->rx_length_errors = + (unsigned long) (stats_blk->stat_EtherStatsUndersizePkts + + stats_blk->stat_EtherStatsOverrsizePkts); + + net_stats->rx_over_errors = + (unsigned long) stats_blk->stat_IfInMBUFDiscards; + + net_stats->rx_frame_errors = + (unsigned long) stats_blk->stat_Dot3StatsAlignmentErrors; + + net_stats->rx_crc_errors = + (unsigned long) stats_blk->stat_Dot3StatsFCSErrors; + + net_stats->rx_errors = net_stats->rx_length_errors + + net_stats->rx_over_errors + net_stats->rx_frame_errors + + net_stats->rx_crc_errors; + + net_stats->tx_aborted_errors = + (unsigned long) (stats_blk->stat_Dot3StatsExcessiveCollisions + + stats_blk->stat_Dot3StatsLateCollisions); + + if (CHIP_NUM(bp) == CHIP_NUM_5706) + net_stats->tx_carrier_errors = 0; + else { + net_stats->tx_carrier_errors = + (unsigned long) + stats_blk->stat_Dot3StatsCarrierSenseErrors; + } + + net_stats->tx_errors = + (unsigned long) + stats_blk->stat_emac_tx_stat_dot3statsinternalmactransmiterrors + + + net_stats->tx_aborted_errors + + net_stats->tx_carrier_errors; + + return net_stats; +} + +/* All ethtool functions called with rtnl_lock */ + +static int +bnx2_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct bnx2 *bp = dev->priv; + + cmd->supported = SUPPORTED_Autoneg; + if (bp->phy_flags & PHY_SERDES_FLAG) { + cmd->supported |= SUPPORTED_1000baseT_Full | + SUPPORTED_FIBRE; + + cmd->port = PORT_FIBRE; + } + else { + cmd->supported |= SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_TP; + + cmd->port = PORT_TP; + } + + cmd->advertising = bp->advertising; + + if (bp->autoneg & AUTONEG_SPEED) { + cmd->autoneg = AUTONEG_ENABLE; + } + else { + cmd->autoneg = AUTONEG_DISABLE; + } + + if (netif_carrier_ok(dev)) { + cmd->speed = bp->line_speed; + cmd->duplex = bp->duplex; + } + else { + cmd->speed = -1; + cmd->duplex = -1; + } + + cmd->transceiver = XCVR_INTERNAL; + cmd->phy_address = bp->phy_addr; + + return 0; +} + +static int +bnx2_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct bnx2 *bp = dev->priv; + u8 autoneg = bp->autoneg; + u8 req_duplex = bp->req_duplex; + u16 req_line_speed = bp->req_line_speed; + u32 advertising = bp->advertising; + + if (cmd->autoneg == AUTONEG_ENABLE) { + autoneg |= AUTONEG_SPEED; + + cmd->advertising &= ETHTOOL_ALL_COPPER_SPEED; + + /* allow advertising 1 speed */ + if ((cmd->advertising == ADVERTISED_10baseT_Half) || + (cmd->advertising == ADVERTISED_10baseT_Full) || + (cmd->advertising == ADVERTISED_100baseT_Half) || + (cmd->advertising == ADVERTISED_100baseT_Full)) { + + if (bp->phy_flags & PHY_SERDES_FLAG) + return -EINVAL; + + advertising = cmd->advertising; + + } + else if (cmd->advertising == ADVERTISED_1000baseT_Full) { + advertising = cmd->advertising; + } + else if (cmd->advertising == ADVERTISED_1000baseT_Half) { + return -EINVAL; + } + else { + if (bp->phy_flags & PHY_SERDES_FLAG) { + advertising = ETHTOOL_ALL_FIBRE_SPEED; + } + else { + advertising = ETHTOOL_ALL_COPPER_SPEED; + } + } + advertising |= ADVERTISED_Autoneg; + } + else { + if (bp->phy_flags & PHY_SERDES_FLAG) { + if ((cmd->speed != SPEED_1000) || + (cmd->duplex != DUPLEX_FULL)) { + return -EINVAL; + } + } + else if (cmd->speed == SPEED_1000) { + return -EINVAL; + } + autoneg &= ~AUTONEG_SPEED; + req_line_speed = cmd->speed; + req_duplex = cmd->duplex; + advertising = 0; + } + + bp->autoneg = autoneg; + bp->advertising = advertising; + bp->req_line_speed = req_line_speed; + bp->req_duplex = req_duplex; + + spin_lock_irq(&bp->phy_lock); + + bnx2_setup_phy(bp); + + spin_unlock_irq(&bp->phy_lock); + + return 0; +} + +static void +bnx2_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + struct bnx2 *bp = dev->priv; + + strcpy(info->driver, DRV_MODULE_NAME); + strcpy(info->version, DRV_MODULE_VERSION); + strcpy(info->bus_info, pci_name(bp->pdev)); + info->fw_version[0] = ((bp->fw_ver & 0xff000000) >> 24) + '0'; + info->fw_version[2] = ((bp->fw_ver & 0xff0000) >> 16) + '0'; + info->fw_version[4] = ((bp->fw_ver & 0xff00) >> 8) + '0'; + info->fw_version[6] = (bp->fw_ver & 0xff) + '0'; + info->fw_version[1] = info->fw_version[3] = info->fw_version[5] = '.'; + info->fw_version[7] = 0; +} + +static void +bnx2_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct bnx2 *bp = dev->priv; + + if (bp->flags & NO_WOL_FLAG) { + wol->supported = 0; + wol->wolopts = 0; + } + else { + wol->supported = WAKE_MAGIC; + if (bp->wol) + wol->wolopts = WAKE_MAGIC; + else + wol->wolopts = 0; + } + memset(&wol->sopass, 0, sizeof(wol->sopass)); +} + +static int +bnx2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct bnx2 *bp = dev->priv; + + if (wol->wolopts & ~WAKE_MAGIC) + return -EINVAL; + + if (wol->wolopts & WAKE_MAGIC) { + if (bp->flags & NO_WOL_FLAG) + return -EINVAL; + + bp->wol = 1; + } + else { + bp->wol = 0; + } + return 0; +} + +static int +bnx2_nway_reset(struct net_device *dev) +{ + struct bnx2 *bp = dev->priv; + u32 bmcr; + + if (!(bp->autoneg & AUTONEG_SPEED)) { + return -EINVAL; + } + + spin_lock_irq(&bp->phy_lock); + + /* Force a link down visible on the other side */ + if (bp->phy_flags & PHY_SERDES_FLAG) { + bnx2_write_phy(bp, MII_BMCR, BMCR_LOOPBACK); + spin_unlock_irq(&bp->phy_lock); + + msleep(20); + + spin_lock_irq(&bp->phy_lock); + if (CHIP_NUM(bp) == CHIP_NUM_5706) { + bp->serdes_an_pending = SERDES_AN_TIMEOUT / + bp->timer_interval; + } + } + + bnx2_read_phy(bp, MII_BMCR, &bmcr); + bmcr &= ~BMCR_LOOPBACK; + bnx2_write_phy(bp, MII_BMCR, bmcr | BMCR_ANRESTART | BMCR_ANENABLE); + + spin_unlock_irq(&bp->phy_lock); + + return 0; +} + +static int +bnx2_get_eeprom_len(struct net_device *dev) +{ + struct bnx2 *bp = dev->priv; + + if (bp->flash_info == 0) + return 0; + + return (int) bp->flash_info->total_size; +} + +static int +bnx2_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, + u8 *eebuf) +{ + struct bnx2 *bp = dev->priv; + int rc; + + if (eeprom->offset > bp->flash_info->total_size) + return -EINVAL; + + if ((eeprom->offset + eeprom->len) > bp->flash_info->total_size) + eeprom->len = bp->flash_info->total_size - eeprom->offset; + + rc = bnx2_nvram_read(bp, eeprom->offset, eebuf, eeprom->len); + + return rc; +} + +static int +bnx2_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, + u8 *eebuf) +{ + struct bnx2 *bp = dev->priv; + int rc; + + if (eeprom->offset > bp->flash_info->total_size) + return -EINVAL; + + if ((eeprom->offset + eeprom->len) > bp->flash_info->total_size) + eeprom->len = bp->flash_info->total_size - eeprom->offset; + + rc = bnx2_nvram_write(bp, eeprom->offset, eebuf, eeprom->len); + + return rc; +} + +static int +bnx2_get_coalesce(struct net_device *dev, struct ethtool_coalesce *coal) +{ + struct bnx2 *bp = dev->priv; + + memset(coal, 0, sizeof(struct ethtool_coalesce)); + + coal->rx_coalesce_usecs = bp->rx_ticks; + coal->rx_max_coalesced_frames = bp->rx_quick_cons_trip; + coal->rx_coalesce_usecs_irq = bp->rx_ticks_int; + coal->rx_max_coalesced_frames_irq = bp->rx_quick_cons_trip_int; + + coal->tx_coalesce_usecs = bp->tx_ticks; + coal->tx_max_coalesced_frames = bp->tx_quick_cons_trip; + coal->tx_coalesce_usecs_irq = bp->tx_ticks_int; + coal->tx_max_coalesced_frames_irq = bp->tx_quick_cons_trip_int; + + coal->stats_block_coalesce_usecs = bp->stats_ticks; + + return 0; +} + +static int +bnx2_set_coalesce(struct net_device *dev, struct ethtool_coalesce *coal) +{ + struct bnx2 *bp = dev->priv; + + bp->rx_ticks = (u16) coal->rx_coalesce_usecs; + if (bp->rx_ticks > 0x3ff) bp->rx_ticks = 0x3ff; + + bp->rx_quick_cons_trip = (u16) coal->rx_max_coalesced_frames; + if (bp->rx_quick_cons_trip > 0xff) bp->rx_quick_cons_trip = 0xff; + + bp->rx_ticks_int = (u16) coal->rx_coalesce_usecs_irq; + if (bp->rx_ticks_int > 0x3ff) bp->rx_ticks_int = 0x3ff; + + bp->rx_quick_cons_trip_int = (u16) coal->rx_max_coalesced_frames_irq; + if (bp->rx_quick_cons_trip_int > 0xff) + bp->rx_quick_cons_trip_int = 0xff; + + bp->tx_ticks = (u16) coal->tx_coalesce_usecs; + if (bp->tx_ticks > 0x3ff) bp->tx_ticks = 0x3ff; + + bp->tx_quick_cons_trip = (u16) coal->tx_max_coalesced_frames; + if (bp->tx_quick_cons_trip > 0xff) bp->tx_quick_cons_trip = 0xff; + + bp->tx_ticks_int = (u16) coal->tx_coalesce_usecs_irq; + if (bp->tx_ticks_int > 0x3ff) bp->tx_ticks_int = 0x3ff; + + bp->tx_quick_cons_trip_int = (u16) coal->tx_max_coalesced_frames_irq; + if (bp->tx_quick_cons_trip_int > 0xff) bp->tx_quick_cons_trip_int = + 0xff; + + bp->stats_ticks = coal->stats_block_coalesce_usecs; + if (bp->stats_ticks > 0xffff00) bp->stats_ticks = 0xffff00; + bp->stats_ticks &= 0xffff00; + + if (netif_running(bp->dev)) { + bnx2_netif_stop(bp); + bnx2_init_nic(bp); + bnx2_netif_start(bp); + } + + return 0; +} + +static void +bnx2_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ering) +{ + struct bnx2 *bp = dev->priv; + + ering->rx_max_pending = MAX_RX_DESC_CNT; + ering->rx_mini_max_pending = 0; + ering->rx_jumbo_max_pending = 0; + + ering->rx_pending = bp->rx_ring_size; + ering->rx_mini_pending = 0; + ering->rx_jumbo_pending = 0; + + ering->tx_max_pending = MAX_TX_DESC_CNT; + ering->tx_pending = bp->tx_ring_size; +} + +static int +bnx2_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ering) +{ + struct bnx2 *bp = dev->priv; + + if ((ering->rx_pending > MAX_RX_DESC_CNT) || + (ering->tx_pending > MAX_TX_DESC_CNT) || + (ering->tx_pending <= MAX_SKB_FRAGS)) { + + return -EINVAL; + } + bp->rx_ring_size = ering->rx_pending; + bp->tx_ring_size = ering->tx_pending; + + if (netif_running(bp->dev)) { + bnx2_netif_stop(bp); + bnx2_init_nic(bp); + bnx2_netif_start(bp); + } + + return 0; +} + +static void +bnx2_get_pauseparam(struct net_device *dev, struct ethtool_pauseparam *epause) +{ + struct bnx2 *bp = dev->priv; + + epause->autoneg = ((bp->autoneg & AUTONEG_FLOW_CTRL) != 0); + epause->rx_pause = ((bp->flow_ctrl & FLOW_CTRL_RX) != 0); + epause->tx_pause = ((bp->flow_ctrl & FLOW_CTRL_TX) != 0); +} + +static int +bnx2_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam *epause) +{ + struct bnx2 *bp = dev->priv; + + bp->req_flow_ctrl = 0; + if (epause->rx_pause) + bp->req_flow_ctrl |= FLOW_CTRL_RX; + if (epause->tx_pause) + bp->req_flow_ctrl |= FLOW_CTRL_TX; + + if (epause->autoneg) { + bp->autoneg |= AUTONEG_FLOW_CTRL; + } + else { + bp->autoneg &= ~AUTONEG_FLOW_CTRL; + } + + spin_lock_irq(&bp->phy_lock); + + bnx2_setup_phy(bp); + + spin_unlock_irq(&bp->phy_lock); + + return 0; +} + +static u32 +bnx2_get_rx_csum(struct net_device *dev) +{ + struct bnx2 *bp = dev->priv; + + return bp->rx_csum; +} + +static int +bnx2_set_rx_csum(struct net_device *dev, u32 data) +{ + struct bnx2 *bp = dev->priv; + + bp->rx_csum = data; + return 0; +} + +#define BNX2_NUM_STATS 45 + +struct { + char string[ETH_GSTRING_LEN]; +} bnx2_stats_str_arr[BNX2_NUM_STATS] = { + { "rx_bytes" }, + { "rx_error_bytes" }, + { "tx_bytes" }, + { "tx_error_bytes" }, + { "rx_ucast_packets" }, + { "rx_mcast_packets" }, + { "rx_bcast_packets" }, + { "tx_ucast_packets" }, + { "tx_mcast_packets" }, + { "tx_bcast_packets" }, + { "tx_mac_errors" }, + { "tx_carrier_errors" }, + { "rx_crc_errors" }, + { "rx_align_errors" }, + { "tx_single_collisions" }, + { "tx_multi_collisions" }, + { "tx_deferred" }, + { "tx_excess_collisions" }, + { "tx_late_collisions" }, + { "tx_total_collisions" }, + { "rx_fragments" }, + { "rx_jabbers" }, + { "rx_undersize_packets" }, + { "rx_oversize_packets" }, + { "rx_64_byte_packets" }, + { "rx_65_to_127_byte_packets" }, + { "rx_128_to_255_byte_packets" }, + { "rx_256_to_511_byte_packets" }, + { "rx_512_to_1023_byte_packets" }, + { "rx_1024_to_1522_byte_packets" }, + { "rx_1523_to_9022_byte_packets" }, + { "tx_64_byte_packets" }, + { "tx_65_to_127_byte_packets" }, + { "tx_128_to_255_byte_packets" }, + { "tx_256_to_511_byte_packets" }, + { "tx_512_to_1023_byte_packets" }, + { "tx_1024_to_1522_byte_packets" }, + { "tx_1523_to_9022_byte_packets" }, + { "rx_xon_frames" }, + { "rx_xoff_frames" }, + { "tx_xon_frames" }, + { "tx_xoff_frames" }, + { "rx_mac_ctrl_frames" }, + { "rx_filtered_packets" }, + { "rx_discards" }, +}; + +#define STATS_OFFSET32(offset_name) (offsetof(struct statistics_block, offset_name) / 4) + +unsigned long bnx2_stats_offset_arr[BNX2_NUM_STATS] = { + STATS_OFFSET32(stat_IfHCInOctets_hi), + STATS_OFFSET32(stat_IfHCInBadOctets_hi), + STATS_OFFSET32(stat_IfHCOutOctets_hi), + STATS_OFFSET32(stat_IfHCOutBadOctets_hi), + STATS_OFFSET32(stat_IfHCInUcastPkts_hi), + STATS_OFFSET32(stat_IfHCInMulticastPkts_hi), + STATS_OFFSET32(stat_IfHCInBroadcastPkts_hi), + STATS_OFFSET32(stat_IfHCOutUcastPkts_hi), + STATS_OFFSET32(stat_IfHCOutMulticastPkts_hi), + STATS_OFFSET32(stat_IfHCOutBroadcastPkts_hi), + STATS_OFFSET32(stat_emac_tx_stat_dot3statsinternalmactransmiterrors), + STATS_OFFSET32(stat_Dot3StatsCarrierSenseErrors), + STATS_OFFSET32(stat_Dot3StatsFCSErrors), + STATS_OFFSET32(stat_Dot3StatsAlignmentErrors), + STATS_OFFSET32(stat_Dot3StatsSingleCollisionFrames), + STATS_OFFSET32(stat_Dot3StatsMultipleCollisionFrames), + STATS_OFFSET32(stat_Dot3StatsDeferredTransmissions), + STATS_OFFSET32(stat_Dot3StatsExcessiveCollisions), + STATS_OFFSET32(stat_Dot3StatsLateCollisions), + STATS_OFFSET32(stat_EtherStatsCollisions), + STATS_OFFSET32(stat_EtherStatsFragments), + STATS_OFFSET32(stat_EtherStatsJabbers), + STATS_OFFSET32(stat_EtherStatsUndersizePkts), + STATS_OFFSET32(stat_EtherStatsOverrsizePkts), + STATS_OFFSET32(stat_EtherStatsPktsRx64Octets), + STATS_OFFSET32(stat_EtherStatsPktsRx65Octetsto127Octets), + STATS_OFFSET32(stat_EtherStatsPktsRx128Octetsto255Octets), + STATS_OFFSET32(stat_EtherStatsPktsRx256Octetsto511Octets), + STATS_OFFSET32(stat_EtherStatsPktsRx512Octetsto1023Octets), + STATS_OFFSET32(stat_EtherStatsPktsRx1024Octetsto1522Octets), + STATS_OFFSET32(stat_EtherStatsPktsRx1523Octetsto9022Octets), + STATS_OFFSET32(stat_EtherStatsPktsTx64Octets), + STATS_OFFSET32(stat_EtherStatsPktsTx65Octetsto127Octets), + STATS_OFFSET32(stat_EtherStatsPktsTx128Octetsto255Octets), + STATS_OFFSET32(stat_EtherStatsPktsTx256Octetsto511Octets), + STATS_OFFSET32(stat_EtherStatsPktsTx512Octetsto1023Octets), + STATS_OFFSET32(stat_EtherStatsPktsTx1024Octetsto1522Octets), + STATS_OFFSET32(stat_EtherStatsPktsTx1523Octetsto9022Octets), + STATS_OFFSET32(stat_XonPauseFramesReceived), + STATS_OFFSET32(stat_XoffPauseFramesReceived), + STATS_OFFSET32(stat_OutXonSent), + STATS_OFFSET32(stat_OutXoffSent), + STATS_OFFSET32(stat_MacControlFramesReceived), + STATS_OFFSET32(stat_IfInFramesL2FilterDiscards), + STATS_OFFSET32(stat_IfInMBUFDiscards), +}; + +/* stat_IfHCInBadOctets and stat_Dot3StatsCarrierSenseErrors are + * skipped because of errata. + */ +u8 bnx2_5706_stats_len_arr[BNX2_NUM_STATS] = { + 8,0,8,8,8,8,8,8,8,8, + 4,0,4,4,4,4,4,4,4,4, + 4,4,4,4,4,4,4,4,4,4, + 4,4,4,4,4,4,4,4,4,4, + 4,4,4,4,4, +}; + +#define BNX2_NUM_TESTS 6 + +struct { + char string[ETH_GSTRING_LEN]; +} bnx2_tests_str_arr[BNX2_NUM_TESTS] = { + { "register_test (offline)" }, + { "memory_test (offline)" }, + { "loopback_test (offline)" }, + { "nvram_test (online)" }, + { "interrupt_test (online)" }, + { "link_test (online)" }, +}; + +static int +bnx2_self_test_count(struct net_device *dev) +{ + return BNX2_NUM_TESTS; +} + +static void +bnx2_self_test(struct net_device *dev, struct ethtool_test *etest, u64 *buf) +{ + struct bnx2 *bp = dev->priv; + + memset(buf, 0, sizeof(u64) * BNX2_NUM_TESTS); + if (etest->flags & ETH_TEST_FL_OFFLINE) { + bnx2_netif_stop(bp); + bnx2_reset_chip(bp, BNX2_DRV_MSG_CODE_DIAG); + bnx2_free_skbs(bp); + + if (bnx2_test_registers(bp) != 0) { + buf[0] = 1; + etest->flags |= ETH_TEST_FL_FAILED; + } + if (bnx2_test_memory(bp) != 0) { + buf[1] = 1; + etest->flags |= ETH_TEST_FL_FAILED; + } + if (bnx2_test_loopback(bp) != 0) { + buf[2] = 1; + etest->flags |= ETH_TEST_FL_FAILED; + } + + if (!netif_running(bp->dev)) { + bnx2_reset_chip(bp, BNX2_DRV_MSG_CODE_RESET); + } + else { + bnx2_init_nic(bp); + bnx2_netif_start(bp); + } + + /* wait for link up */ + msleep_interruptible(3000); + if ((!bp->link_up) && !(bp->phy_flags & PHY_SERDES_FLAG)) + msleep_interruptible(4000); + } + + if (bnx2_test_nvram(bp) != 0) { + buf[3] = 1; + etest->flags |= ETH_TEST_FL_FAILED; + } + if (bnx2_test_intr(bp) != 0) { + buf[4] = 1; + etest->flags |= ETH_TEST_FL_FAILED; + } + + if (bnx2_test_link(bp) != 0) { + buf[5] = 1; + etest->flags |= ETH_TEST_FL_FAILED; + + } +} + +static void +bnx2_get_strings(struct net_device *dev, u32 stringset, u8 *buf) +{ + switch (stringset) { + case ETH_SS_STATS: + memcpy(buf, bnx2_stats_str_arr, + sizeof(bnx2_stats_str_arr)); + break; + case ETH_SS_TEST: + memcpy(buf, bnx2_tests_str_arr, + sizeof(bnx2_tests_str_arr)); + break; + } +} + +static int +bnx2_get_stats_count(struct net_device *dev) +{ + return BNX2_NUM_STATS; +} + +static void +bnx2_get_ethtool_stats(struct net_device *dev, + struct ethtool_stats *stats, u64 *buf) +{ + struct bnx2 *bp = dev->priv; + int i; + u32 *hw_stats = (u32 *) bp->stats_blk; + u8 *stats_len_arr = 0; + + if (hw_stats == NULL) { + memset(buf, 0, sizeof(u64) * BNX2_NUM_STATS); + return; + } + + if (CHIP_NUM(bp) == CHIP_NUM_5706) + stats_len_arr = bnx2_5706_stats_len_arr; + + for (i = 0; i < BNX2_NUM_STATS; i++) { + if (stats_len_arr[i] == 0) { + /* skip this counter */ + buf[i] = 0; + continue; + } + if (stats_len_arr[i] == 4) { + /* 4-byte counter */ + buf[i] = (u64) + *(hw_stats + bnx2_stats_offset_arr[i]); + continue; + } + /* 8-byte counter */ + buf[i] = (((u64) *(hw_stats + + bnx2_stats_offset_arr[i])) << 32) + + *(hw_stats + bnx2_stats_offset_arr[i] + 1); + } +} + +static int +bnx2_phys_id(struct net_device *dev, u32 data) +{ + struct bnx2 *bp = dev->priv; + int i; + u32 save; + + if (data == 0) + data = 2; + + save = REG_RD(bp, BNX2_MISC_CFG); + REG_WR(bp, BNX2_MISC_CFG, BNX2_MISC_CFG_LEDMODE_MAC); + + for (i = 0; i < (data * 2); i++) { + if ((i % 2) == 0) { + REG_WR(bp, BNX2_EMAC_LED, BNX2_EMAC_LED_OVERRIDE); + } + else { + REG_WR(bp, BNX2_EMAC_LED, BNX2_EMAC_LED_OVERRIDE | + BNX2_EMAC_LED_1000MB_OVERRIDE | + BNX2_EMAC_LED_100MB_OVERRIDE | + BNX2_EMAC_LED_10MB_OVERRIDE | + BNX2_EMAC_LED_TRAFFIC_OVERRIDE | + BNX2_EMAC_LED_TRAFFIC); + } + msleep_interruptible(500); + if (signal_pending(current)) + break; + } + REG_WR(bp, BNX2_EMAC_LED, 0); + REG_WR(bp, BNX2_MISC_CFG, save); + return 0; +} + +static struct ethtool_ops bnx2_ethtool_ops = { + .get_settings = bnx2_get_settings, + .set_settings = bnx2_set_settings, + .get_drvinfo = bnx2_get_drvinfo, + .get_wol = bnx2_get_wol, + .set_wol = bnx2_set_wol, + .nway_reset = bnx2_nway_reset, + .get_link = ethtool_op_get_link, + .get_eeprom_len = bnx2_get_eeprom_len, + .get_eeprom = bnx2_get_eeprom, + .set_eeprom = bnx2_set_eeprom, + .get_coalesce = bnx2_get_coalesce, + .set_coalesce = bnx2_set_coalesce, + .get_ringparam = bnx2_get_ringparam, + .set_ringparam = bnx2_set_ringparam, + .get_pauseparam = bnx2_get_pauseparam, + .set_pauseparam = bnx2_set_pauseparam, + .get_rx_csum = bnx2_get_rx_csum, + .set_rx_csum = bnx2_set_rx_csum, + .get_tx_csum = ethtool_op_get_tx_csum, + .set_tx_csum = ethtool_op_set_tx_csum, + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, +#ifdef BCM_TSO + .get_tso = ethtool_op_get_tso, + .set_tso = ethtool_op_set_tso, +#endif + .self_test_count = bnx2_self_test_count, + .self_test = bnx2_self_test, + .get_strings = bnx2_get_strings, + .phys_id = bnx2_phys_id, + .get_stats_count = bnx2_get_stats_count, + .get_ethtool_stats = bnx2_get_ethtool_stats, +}; + +/* Called with rtnl_lock */ +static int +bnx2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + struct mii_ioctl_data *data = (struct mii_ioctl_data *)&ifr->ifr_data; + struct bnx2 *bp = dev->priv; + int err; + + switch(cmd) { + case SIOCGMIIPHY: + data->phy_id = bp->phy_addr; + + /* fallthru */ + case SIOCGMIIREG: { + u32 mii_regval; + + spin_lock_irq(&bp->phy_lock); + err = bnx2_read_phy(bp, data->reg_num & 0x1f, &mii_regval); + spin_unlock_irq(&bp->phy_lock); + + data->val_out = mii_regval; + + return err; + } + + case SIOCSMIIREG: + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + spin_lock_irq(&bp->phy_lock); + err = bnx2_write_phy(bp, data->reg_num & 0x1f, data->val_in); + spin_unlock_irq(&bp->phy_lock); + + return err; + + default: + /* do nothing */ + break; + } + return -EOPNOTSUPP; +} + +/* Called with rtnl_lock */ +static int +bnx2_change_mac_addr(struct net_device *dev, void *p) +{ + struct sockaddr *addr = p; + struct bnx2 *bp = dev->priv; + + memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); + if (netif_running(dev)) + bnx2_set_mac_addr(bp); + + return 0; +} + +/* Called with rtnl_lock */ +static int +bnx2_change_mtu(struct net_device *dev, int new_mtu) +{ + struct bnx2 *bp = dev->priv; + + if (((new_mtu + ETH_HLEN) > MAX_ETHERNET_JUMBO_PACKET_SIZE) || + ((new_mtu + ETH_HLEN) < MIN_ETHERNET_PACKET_SIZE)) + return -EINVAL; + + dev->mtu = new_mtu; + if (netif_running(dev)) { + bnx2_netif_stop(bp); + + bnx2_init_nic(bp); + + bnx2_netif_start(bp); + } + return 0; +} + +#if defined(HAVE_POLL_CONTROLLER) || defined(CONFIG_NET_POLL_CONTROLLER) +static void +poll_bnx2(struct net_device *dev) +{ + struct bnx2 *bp = dev->priv; + + disable_irq(bp->pdev->irq); + bnx2_interrupt(bp->pdev->irq, dev, NULL); + enable_irq(bp->pdev->irq); +} +#endif + +static int __devinit +bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) +{ + struct bnx2 *bp; + unsigned long mem_len; + int rc; + u32 reg; + + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, &pdev->dev); + bp = dev->priv; + + bp->flags = 0; + bp->phy_flags = 0; + + /* enable device (incl. PCI PM wakeup), and bus-mastering */ + rc = pci_enable_device(pdev); + if (rc) { + printk(KERN_ERR PFX "Cannot enable PCI device, aborting."); + goto err_out; + } + + if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { + printk(KERN_ERR PFX "Cannot find PCI device base address, " + "aborting.\n"); + rc = -ENODEV; + goto err_out_disable; + } + + rc = pci_request_regions(pdev, DRV_MODULE_NAME); + if (rc) { + printk(KERN_ERR PFX "Cannot obtain PCI resources, aborting.\n"); + goto err_out_disable; + } + + pci_set_master(pdev); + + bp->pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM); + if (bp->pm_cap == 0) { + printk(KERN_ERR PFX "Cannot find power management capability, " + "aborting.\n"); + rc = -EIO; + goto err_out_release; + } + + bp->pcix_cap = pci_find_capability(pdev, PCI_CAP_ID_PCIX); + if (bp->pcix_cap == 0) { + printk(KERN_ERR PFX "Cannot find PCIX capability, aborting.\n"); + rc = -EIO; + goto err_out_release; + } + + if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) == 0) { + bp->flags |= USING_DAC_FLAG; + if (pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK) != 0) { + printk(KERN_ERR PFX "pci_set_consistent_dma_mask " + "failed, aborting.\n"); + rc = -EIO; + goto err_out_release; + } + } + else if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0) { + printk(KERN_ERR PFX "System does not support DMA, aborting.\n"); + rc = -EIO; + goto err_out_release; + } + + bp->dev = dev; + bp->pdev = pdev; + + spin_lock_init(&bp->phy_lock); + spin_lock_init(&bp->tx_lock); + INIT_WORK(&bp->reset_task, bnx2_reset_task, bp); + + dev->base_addr = dev->mem_start = pci_resource_start(pdev, 0); + mem_len = MB_GET_CID_ADDR(17); + dev->mem_end = dev->mem_start + mem_len; + dev->irq = pdev->irq; + + bp->regview = ioremap_nocache(dev->base_addr, mem_len); + + if (!bp->regview) { + printk(KERN_ERR PFX "Cannot map register space, aborting.\n"); + rc = -ENOMEM; + goto err_out_release; + } + + /* Configure byte swap and enable write to the reg_window registers. + * Rely on CPU to do target byte swapping on big endian systems + * The chip's target access swapping will not swap all accesses + */ + pci_write_config_dword(bp->pdev, BNX2_PCICFG_MISC_CONFIG, + BNX2_PCICFG_MISC_CONFIG_REG_WINDOW_ENA | + BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP); + + bnx2_set_power_state(bp, 0); + + bp->chip_id = REG_RD(bp, BNX2_MISC_ID); + + bp->phy_addr = 1; + + /* Get bus information. */ + reg = REG_RD(bp, BNX2_PCICFG_MISC_STATUS); + if (reg & BNX2_PCICFG_MISC_STATUS_PCIX_DET) { + u32 clkreg; + + bp->flags |= PCIX_FLAG; + + clkreg = REG_RD(bp, BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS); + + clkreg &= BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET; + switch (clkreg) { + case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_133MHZ: + bp->bus_speed_mhz = 133; + break; + + case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_95MHZ: + bp->bus_speed_mhz = 100; + break; + + case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_66MHZ: + case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_80MHZ: + bp->bus_speed_mhz = 66; + break; + + case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_48MHZ: + case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_55MHZ: + bp->bus_speed_mhz = 50; + break; + + case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_LOW: + case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_32MHZ: + case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_38MHZ: + bp->bus_speed_mhz = 33; + break; + } + } + else { + if (reg & BNX2_PCICFG_MISC_STATUS_M66EN) + bp->bus_speed_mhz = 66; + else + bp->bus_speed_mhz = 33; + } + + if (reg & BNX2_PCICFG_MISC_STATUS_32BIT_DET) + bp->flags |= PCI_32BIT_FLAG; + + /* 5706A0 may falsely detect SERR and PERR. */ + if (CHIP_ID(bp) == CHIP_ID_5706_A0) { + reg = REG_RD(bp, PCI_COMMAND); + reg &= ~(PCI_COMMAND_SERR | PCI_COMMAND_PARITY); + REG_WR(bp, PCI_COMMAND, reg); + } + else if ((CHIP_ID(bp) == CHIP_ID_5706_A1) && + !(bp->flags & PCIX_FLAG)) { + + printk(KERN_ERR PFX "5706 A1 can only be used in a PCIX bus, " + "aborting.\n"); + goto err_out_unmap; + } + + bnx2_init_nvram(bp); + + /* Get the permanent MAC address. First we need to make sure the + * firmware is actually running. + */ + reg = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_DEV_INFO_SIGNATURE); + + if ((reg & BNX2_DEV_INFO_SIGNATURE_MAGIC_MASK) != + BNX2_DEV_INFO_SIGNATURE_MAGIC) { + printk(KERN_ERR PFX "Firmware not running, aborting.\n"); + rc = -ENODEV; + goto err_out_unmap; + } + + bp->fw_ver = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + + BNX2_DEV_INFO_BC_REV); + + reg = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_PORT_HW_CFG_MAC_UPPER); + bp->mac_addr[0] = (u8) (reg >> 8); + bp->mac_addr[1] = (u8) reg; + + reg = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_PORT_HW_CFG_MAC_LOWER); + bp->mac_addr[2] = (u8) (reg >> 24); + bp->mac_addr[3] = (u8) (reg >> 16); + bp->mac_addr[4] = (u8) (reg >> 8); + bp->mac_addr[5] = (u8) reg; + + bp->tx_ring_size = MAX_TX_DESC_CNT; + bp->rx_ring_size = 100; + + bp->rx_csum = 1; + + bp->rx_offset = sizeof(struct l2_fhdr) + 2; + + bp->tx_quick_cons_trip_int = 20; + bp->tx_quick_cons_trip = 20; + bp->tx_ticks_int = 80; + bp->tx_ticks = 80; + + bp->rx_quick_cons_trip_int = 6; + bp->rx_quick_cons_trip = 6; + bp->rx_ticks_int = 18; + bp->rx_ticks = 18; + + bp->stats_ticks = 1000000 & 0xffff00; + + bp->timer_interval = HZ; + + /* Disable WOL support if we are running on a SERDES chip. */ + if (CHIP_BOND_ID(bp) & CHIP_BOND_ID_SERDES_BIT) { + bp->phy_flags |= PHY_SERDES_FLAG; + bp->flags |= NO_WOL_FLAG; + } + + if (CHIP_ID(bp) == CHIP_ID_5706_A0) { + bp->tx_quick_cons_trip_int = + bp->tx_quick_cons_trip; + bp->tx_ticks_int = bp->tx_ticks; + bp->rx_quick_cons_trip_int = + bp->rx_quick_cons_trip; + bp->rx_ticks_int = bp->rx_ticks; + bp->comp_prod_trip_int = bp->comp_prod_trip; + bp->com_ticks_int = bp->com_ticks; + bp->cmd_ticks_int = bp->cmd_ticks; + } + + bp->autoneg = AUTONEG_SPEED | AUTONEG_FLOW_CTRL; + bp->req_line_speed = 0; + if (bp->phy_flags & PHY_SERDES_FLAG) { + bp->advertising = ETHTOOL_ALL_FIBRE_SPEED | ADVERTISED_Autoneg; + } + else { + bp->advertising = ETHTOOL_ALL_COPPER_SPEED | ADVERTISED_Autoneg; + } + + bp->req_flow_ctrl = FLOW_CTRL_RX | FLOW_CTRL_TX; + + return 0; + +err_out_unmap: + if (bp->regview) { + iounmap(bp->regview); + } + +err_out_release: + pci_release_regions(pdev); + +err_out_disable: + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + +err_out: + return rc; +} + +static int __devinit +bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int version_printed = 0; + struct net_device *dev = NULL; + struct bnx2 *bp; + int rc, i; + + if (version_printed++ == 0) + printk(KERN_INFO "%s", version); + + /* dev zeroed in init_etherdev */ + dev = alloc_etherdev(sizeof(*bp)); + + if (!dev) + return -ENOMEM; + + rc = bnx2_init_board(pdev, dev); + if (rc < 0) { + free_netdev(dev); + return rc; + } + + dev->open = bnx2_open; + dev->hard_start_xmit = bnx2_start_xmit; + dev->stop = bnx2_close; + dev->get_stats = bnx2_get_stats; + dev->set_multicast_list = bnx2_set_rx_mode; + dev->do_ioctl = bnx2_ioctl; + dev->set_mac_address = bnx2_change_mac_addr; + dev->change_mtu = bnx2_change_mtu; + dev->tx_timeout = bnx2_tx_timeout; + dev->watchdog_timeo = TX_TIMEOUT; +#ifdef BCM_VLAN + dev->vlan_rx_register = bnx2_vlan_rx_register; + dev->vlan_rx_kill_vid = bnx2_vlan_rx_kill_vid; +#endif + dev->poll = bnx2_poll; + dev->ethtool_ops = &bnx2_ethtool_ops; + dev->weight = 64; + + bp = dev->priv; + +#if defined(HAVE_POLL_CONTROLLER) || defined(CONFIG_NET_POLL_CONTROLLER) + dev->poll_controller = poll_bnx2; +#endif + + if ((rc = register_netdev(dev))) { + printk(KERN_ERR PFX "Cannot register net device\n"); + if (bp->regview) + iounmap(bp->regview); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + free_netdev(dev); + return rc; + } + + pci_set_drvdata(pdev, dev); + + memcpy(dev->dev_addr, bp->mac_addr, 6); + bp->name = board_info[ent->driver_data].name, + printk(KERN_INFO "%s: %s (%c%d) PCI%s %s %dMHz found at mem %lx, " + "IRQ %d, ", + dev->name, + bp->name, + ((CHIP_ID(bp) & 0xf000) >> 12) + 'A', + ((CHIP_ID(bp) & 0x0ff0) >> 4), + ((bp->flags & PCIX_FLAG) ? "-X" : ""), + ((bp->flags & PCI_32BIT_FLAG) ? "32-bit" : "64-bit"), + bp->bus_speed_mhz, + dev->base_addr, + bp->pdev->irq); + + printk("node addr "); + for (i = 0; i < 6; i++) + printk("%2.2x", dev->dev_addr[i]); + printk("\n"); + + dev->features |= NETIF_F_SG; + if (bp->flags & USING_DAC_FLAG) + dev->features |= NETIF_F_HIGHDMA; + dev->features |= NETIF_F_IP_CSUM; +#ifdef BCM_VLAN + dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; +#endif +#ifdef BCM_TSO + dev->features |= NETIF_F_TSO; +#endif + + netif_carrier_off(bp->dev); + + return 0; +} + +static void __devexit +bnx2_remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct bnx2 *bp = dev->priv; + + unregister_netdev(dev); + + if (bp->regview) + iounmap(bp->regview); + + free_netdev(dev); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); +} + +static int +bnx2_suspend(struct pci_dev *pdev, u32 state) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct bnx2 *bp = dev->priv; + u32 reset_code; + + if (!netif_running(dev)) + return 0; + + bnx2_netif_stop(bp); + netif_device_detach(dev); + del_timer_sync(&bp->timer); + if (bp->wol) + reset_code = BNX2_DRV_MSG_CODE_SUSPEND_WOL; + else + reset_code = BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL; + bnx2_reset_chip(bp, reset_code); + bnx2_free_skbs(bp); + bnx2_set_power_state(bp, state); + return 0; +} + +static int +bnx2_resume(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct bnx2 *bp = dev->priv; + + if (!netif_running(dev)) + return 0; + + bnx2_set_power_state(bp, 0); + netif_device_attach(dev); + bnx2_init_nic(bp); + bnx2_netif_start(bp); + return 0; +} + +static struct pci_driver bnx2_pci_driver = { + name: DRV_MODULE_NAME, + id_table: bnx2_pci_tbl, + probe: bnx2_init_one, + remove: __devexit_p(bnx2_remove_one), + suspend: bnx2_suspend, + resume: bnx2_resume, +}; + +static int __init bnx2_init(void) +{ + return pci_module_init(&bnx2_pci_driver); +} + +static void __exit bnx2_cleanup(void) +{ + pci_unregister_driver(&bnx2_pci_driver); +} + +module_init(bnx2_init); +module_exit(bnx2_cleanup); + + + diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h new file mode 100644 index 00000000000..8214a2853d0 --- /dev/null +++ b/drivers/net/bnx2.h @@ -0,0 +1,4352 @@ +/* bnx2.h: Broadcom NX2 network driver. + * + * Copyright (c) 2004, 2005 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * Written by: Michael Chan (mchan@broadcom.com) + */ + + +#ifndef BNX2_H +#define BNX2_H + +#include + +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#ifdef NETIF_F_HW_VLAN_TX +#include +#define BCM_VLAN 1 +#endif +#ifdef NETIF_F_TSO +#include +#include +#include +#define BCM_TSO 1 +#endif +#include +#include + +/* Hardware data structures and register definitions automatically + * generated from RTL code. Do not modify. + */ + +/* + * tx_bd definition + */ +struct tx_bd { + u32 tx_bd_haddr_hi; + u32 tx_bd_haddr_lo; + u32 tx_bd_mss_nbytes; + u32 tx_bd_vlan_tag_flags; + #define TX_BD_FLAGS_CONN_FAULT (1<<0) + #define TX_BD_FLAGS_TCP_UDP_CKSUM (1<<1) + #define TX_BD_FLAGS_IP_CKSUM (1<<2) + #define TX_BD_FLAGS_VLAN_TAG (1<<3) + #define TX_BD_FLAGS_COAL_NOW (1<<4) + #define TX_BD_FLAGS_DONT_GEN_CRC (1<<5) + #define TX_BD_FLAGS_END (1<<6) + #define TX_BD_FLAGS_START (1<<7) + #define TX_BD_FLAGS_SW_OPTION_WORD (0x1f<<8) + #define TX_BD_FLAGS_SW_FLAGS (1<<13) + #define TX_BD_FLAGS_SW_SNAP (1<<14) + #define TX_BD_FLAGS_SW_LSO (1<<15) + +}; + + +/* + * rx_bd definition + */ +struct rx_bd { + u32 rx_bd_haddr_hi; + u32 rx_bd_haddr_lo; + u32 rx_bd_len; + u32 rx_bd_flags; + #define RX_BD_FLAGS_NOPUSH (1<<0) + #define RX_BD_FLAGS_DUMMY (1<<1) + #define RX_BD_FLAGS_END (1<<2) + #define RX_BD_FLAGS_START (1<<3) + +}; + + +/* + * status_block definition + */ +struct status_block { + u32 status_attn_bits; + #define STATUS_ATTN_BITS_LINK_STATE (1L<<0) + #define STATUS_ATTN_BITS_TX_SCHEDULER_ABORT (1L<<1) + #define STATUS_ATTN_BITS_TX_BD_READ_ABORT (1L<<2) + #define STATUS_ATTN_BITS_TX_BD_CACHE_ABORT (1L<<3) + #define STATUS_ATTN_BITS_TX_PROCESSOR_ABORT (1L<<4) + #define STATUS_ATTN_BITS_TX_DMA_ABORT (1L<<5) + #define STATUS_ATTN_BITS_TX_PATCHUP_ABORT (1L<<6) + #define STATUS_ATTN_BITS_TX_ASSEMBLER_ABORT (1L<<7) + #define STATUS_ATTN_BITS_RX_PARSER_MAC_ABORT (1L<<8) + #define STATUS_ATTN_BITS_RX_PARSER_CATCHUP_ABORT (1L<<9) + #define STATUS_ATTN_BITS_RX_MBUF_ABORT (1L<<10) + #define STATUS_ATTN_BITS_RX_LOOKUP_ABORT (1L<<11) + #define STATUS_ATTN_BITS_RX_PROCESSOR_ABORT (1L<<12) + #define STATUS_ATTN_BITS_RX_V2P_ABORT (1L<<13) + #define STATUS_ATTN_BITS_RX_BD_CACHE_ABORT (1L<<14) + #define STATUS_ATTN_BITS_RX_DMA_ABORT (1L<<15) + #define STATUS_ATTN_BITS_COMPLETION_ABORT (1L<<16) + #define STATUS_ATTN_BITS_HOST_COALESCE_ABORT (1L<<17) + #define STATUS_ATTN_BITS_MAILBOX_QUEUE_ABORT (1L<<18) + #define STATUS_ATTN_BITS_CONTEXT_ABORT (1L<<19) + #define STATUS_ATTN_BITS_CMD_SCHEDULER_ABORT (1L<<20) + #define STATUS_ATTN_BITS_CMD_PROCESSOR_ABORT (1L<<21) + #define STATUS_ATTN_BITS_MGMT_PROCESSOR_ABORT (1L<<22) + #define STATUS_ATTN_BITS_MAC_ABORT (1L<<23) + #define STATUS_ATTN_BITS_TIMER_ABORT (1L<<24) + #define STATUS_ATTN_BITS_DMAE_ABORT (1L<<25) + #define STATUS_ATTN_BITS_FLSH_ABORT (1L<<26) + #define STATUS_ATTN_BITS_GRC_ABORT (1L<<27) + #define STATUS_ATTN_BITS_PARITY_ERROR (1L<<31) + + u32 status_attn_bits_ack; +#if defined(__BIG_ENDIAN) + u16 status_tx_quick_consumer_index0; + u16 status_tx_quick_consumer_index1; + u16 status_tx_quick_consumer_index2; + u16 status_tx_quick_consumer_index3; + u16 status_rx_quick_consumer_index0; + u16 status_rx_quick_consumer_index1; + u16 status_rx_quick_consumer_index2; + u16 status_rx_quick_consumer_index3; + u16 status_rx_quick_consumer_index4; + u16 status_rx_quick_consumer_index5; + u16 status_rx_quick_consumer_index6; + u16 status_rx_quick_consumer_index7; + u16 status_rx_quick_consumer_index8; + u16 status_rx_quick_consumer_index9; + u16 status_rx_quick_consumer_index10; + u16 status_rx_quick_consumer_index11; + u16 status_rx_quick_consumer_index12; + u16 status_rx_quick_consumer_index13; + u16 status_rx_quick_consumer_index14; + u16 status_rx_quick_consumer_index15; + u16 status_completion_producer_index; + u16 status_cmd_consumer_index; + u16 status_idx; + u16 status_unused; +#elif defined(__LITTLE_ENDIAN) + u16 status_tx_quick_consumer_index1; + u16 status_tx_quick_consumer_index0; + u16 status_tx_quick_consumer_index3; + u16 status_tx_quick_consumer_index2; + u16 status_rx_quick_consumer_index1; + u16 status_rx_quick_consumer_index0; + u16 status_rx_quick_consumer_index3; + u16 status_rx_quick_consumer_index2; + u16 status_rx_quick_consumer_index5; + u16 status_rx_quick_consumer_index4; + u16 status_rx_quick_consumer_index7; + u16 status_rx_quick_consumer_index6; + u16 status_rx_quick_consumer_index9; + u16 status_rx_quick_consumer_index8; + u16 status_rx_quick_consumer_index11; + u16 status_rx_quick_consumer_index10; + u16 status_rx_quick_consumer_index13; + u16 status_rx_quick_consumer_index12; + u16 status_rx_quick_consumer_index15; + u16 status_rx_quick_consumer_index14; + u16 status_cmd_consumer_index; + u16 status_completion_producer_index; + u16 status_unused; + u16 status_idx; +#endif +}; + + +/* + * statistics_block definition + */ +struct statistics_block { + u32 stat_IfHCInOctets_hi; + u32 stat_IfHCInOctets_lo; + u32 stat_IfHCInBadOctets_hi; + u32 stat_IfHCInBadOctets_lo; + u32 stat_IfHCOutOctets_hi; + u32 stat_IfHCOutOctets_lo; + u32 stat_IfHCOutBadOctets_hi; + u32 stat_IfHCOutBadOctets_lo; + u32 stat_IfHCInUcastPkts_hi; + u32 stat_IfHCInUcastPkts_lo; + u32 stat_IfHCInMulticastPkts_hi; + u32 stat_IfHCInMulticastPkts_lo; + u32 stat_IfHCInBroadcastPkts_hi; + u32 stat_IfHCInBroadcastPkts_lo; + u32 stat_IfHCOutUcastPkts_hi; + u32 stat_IfHCOutUcastPkts_lo; + u32 stat_IfHCOutMulticastPkts_hi; + u32 stat_IfHCOutMulticastPkts_lo; + u32 stat_IfHCOutBroadcastPkts_hi; + u32 stat_IfHCOutBroadcastPkts_lo; + u32 stat_emac_tx_stat_dot3statsinternalmactransmiterrors; + u32 stat_Dot3StatsCarrierSenseErrors; + u32 stat_Dot3StatsFCSErrors; + u32 stat_Dot3StatsAlignmentErrors; + u32 stat_Dot3StatsSingleCollisionFrames; + u32 stat_Dot3StatsMultipleCollisionFrames; + u32 stat_Dot3StatsDeferredTransmissions; + u32 stat_Dot3StatsExcessiveCollisions; + u32 stat_Dot3StatsLateCollisions; + u32 stat_EtherStatsCollisions; + u32 stat_EtherStatsFragments; + u32 stat_EtherStatsJabbers; + u32 stat_EtherStatsUndersizePkts; + u32 stat_EtherStatsOverrsizePkts; + u32 stat_EtherStatsPktsRx64Octets; + u32 stat_EtherStatsPktsRx65Octetsto127Octets; + u32 stat_EtherStatsPktsRx128Octetsto255Octets; + u32 stat_EtherStatsPktsRx256Octetsto511Octets; + u32 stat_EtherStatsPktsRx512Octetsto1023Octets; + u32 stat_EtherStatsPktsRx1024Octetsto1522Octets; + u32 stat_EtherStatsPktsRx1523Octetsto9022Octets; + u32 stat_EtherStatsPktsTx64Octets; + u32 stat_EtherStatsPktsTx65Octetsto127Octets; + u32 stat_EtherStatsPktsTx128Octetsto255Octets; + u32 stat_EtherStatsPktsTx256Octetsto511Octets; + u32 stat_EtherStatsPktsTx512Octetsto1023Octets; + u32 stat_EtherStatsPktsTx1024Octetsto1522Octets; + u32 stat_EtherStatsPktsTx1523Octetsto9022Octets; + u32 stat_XonPauseFramesReceived; + u32 stat_XoffPauseFramesReceived; + u32 stat_OutXonSent; + u32 stat_OutXoffSent; + u32 stat_FlowControlDone; + u32 stat_MacControlFramesReceived; + u32 stat_XoffStateEntered; + u32 stat_IfInFramesL2FilterDiscards; + u32 stat_IfInRuleCheckerDiscards; + u32 stat_IfInFTQDiscards; + u32 stat_IfInMBUFDiscards; + u32 stat_IfInRuleCheckerP4Hit; + u32 stat_CatchupInRuleCheckerDiscards; + u32 stat_CatchupInFTQDiscards; + u32 stat_CatchupInMBUFDiscards; + u32 stat_CatchupInRuleCheckerP4Hit; + u32 stat_GenStat00; + u32 stat_GenStat01; + u32 stat_GenStat02; + u32 stat_GenStat03; + u32 stat_GenStat04; + u32 stat_GenStat05; + u32 stat_GenStat06; + u32 stat_GenStat07; + u32 stat_GenStat08; + u32 stat_GenStat09; + u32 stat_GenStat10; + u32 stat_GenStat11; + u32 stat_GenStat12; + u32 stat_GenStat13; + u32 stat_GenStat14; + u32 stat_GenStat15; +}; + + +/* + * l2_fhdr definition + */ +struct l2_fhdr { +#if defined(__BIG_ENDIAN) + u16 l2_fhdr_errors; + u16 l2_fhdr_status; +#elif defined(__LITTLE_ENDIAN) + u16 l2_fhdr_status; + u16 l2_fhdr_errors; +#endif + #define L2_FHDR_ERRORS_BAD_CRC (1<<1) + #define L2_FHDR_ERRORS_PHY_DECODE (1<<2) + #define L2_FHDR_ERRORS_ALIGNMENT (1<<3) + #define L2_FHDR_ERRORS_TOO_SHORT (1<<4) + #define L2_FHDR_ERRORS_GIANT_FRAME (1<<5) + + #define L2_FHDR_STATUS_RULE_CLASS (0x7<<0) + #define L2_FHDR_STATUS_RULE_P2 (1<<3) + #define L2_FHDR_STATUS_RULE_P3 (1<<4) + #define L2_FHDR_STATUS_RULE_P4 (1<<5) + #define L2_FHDR_STATUS_L2_VLAN_TAG (1<<6) + #define L2_FHDR_STATUS_L2_LLC_SNAP (1<<7) + #define L2_FHDR_STATUS_RSS_HASH (1<<8) + #define L2_FHDR_STATUS_IP_DATAGRAM (1<<13) + #define L2_FHDR_STATUS_TCP_SEGMENT (1<<14) + #define L2_FHDR_STATUS_UDP_DATAGRAM (1<<15) + + u32 l2_fhdr_hash; +#if defined(__BIG_ENDIAN) + u16 l2_fhdr_pkt_len; + u16 l2_fhdr_vlan_tag; + u16 l2_fhdr_ip_xsum; + u16 l2_fhdr_tcp_udp_xsum; +#elif defined(__LITTLE_ENDIAN) + u16 l2_fhdr_vlan_tag; + u16 l2_fhdr_pkt_len; + u16 l2_fhdr_tcp_udp_xsum; + u16 l2_fhdr_ip_xsum; +#endif +}; + + +/* + * l2_context definition + */ +#define BNX2_L2CTX_TYPE 0x00000000 +#define BNX2_L2CTX_TYPE_SIZE_L2 ((0xc0/0x20)<<16) +#define BNX2_L2CTX_TYPE_TYPE (0xf<<28) +#define BNX2_L2CTX_TYPE_TYPE_EMPTY (0<<28) +#define BNX2_L2CTX_TYPE_TYPE_L2 (1<<28) + +#define BNX2_L2CTX_TX_HOST_BIDX 0x00000088 +#define BNX2_L2CTX_EST_NBD 0x00000088 +#define BNX2_L2CTX_CMD_TYPE 0x00000088 +#define BNX2_L2CTX_CMD_TYPE_TYPE (0xf<<24) +#define BNX2_L2CTX_CMD_TYPE_TYPE_L2 (0<<24) +#define BNX2_L2CTX_CMD_TYPE_TYPE_TCP (1<<24) + +#define BNX2_L2CTX_TX_HOST_BSEQ 0x00000090 +#define BNX2_L2CTX_TSCH_BSEQ 0x00000094 +#define BNX2_L2CTX_TBDR_BSEQ 0x00000098 +#define BNX2_L2CTX_TBDR_BOFF 0x0000009c +#define BNX2_L2CTX_TBDR_BIDX 0x0000009c +#define BNX2_L2CTX_TBDR_BHADDR_HI 0x000000a0 +#define BNX2_L2CTX_TBDR_BHADDR_LO 0x000000a4 +#define BNX2_L2CTX_TXP_BOFF 0x000000a8 +#define BNX2_L2CTX_TXP_BIDX 0x000000a8 +#define BNX2_L2CTX_TXP_BSEQ 0x000000ac + + +/* + * l2_bd_chain_context definition + */ +#define BNX2_L2CTX_BD_PRE_READ 0x00000000 +#define BNX2_L2CTX_CTX_SIZE 0x00000000 +#define BNX2_L2CTX_CTX_TYPE 0x00000000 +#define BNX2_L2CTX_CTX_TYPE_SIZE_L2 ((0x20/20)<<16) +#define BNX2_L2CTX_CTX_TYPE_CTX_BD_CHN_TYPE (0xf<<28) +#define BNX2_L2CTX_CTX_TYPE_CTX_BD_CHN_TYPE_UNDEFINED (0<<28) +#define BNX2_L2CTX_CTX_TYPE_CTX_BD_CHN_TYPE_VALUE (1<<28) + +#define BNX2_L2CTX_HOST_BDIDX 0x00000004 +#define BNX2_L2CTX_HOST_BSEQ 0x00000008 +#define BNX2_L2CTX_NX_BSEQ 0x0000000c +#define BNX2_L2CTX_NX_BDHADDR_HI 0x00000010 +#define BNX2_L2CTX_NX_BDHADDR_LO 0x00000014 +#define BNX2_L2CTX_NX_BDIDX 0x00000018 + + +/* + * pci_config_l definition + * offset: 0000 + */ +#define BNX2_PCICFG_MISC_CONFIG 0x00000068 +#define BNX2_PCICFG_MISC_CONFIG_TARGET_BYTE_SWAP (1L<<2) +#define BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP (1L<<3) +#define BNX2_PCICFG_MISC_CONFIG_CLOCK_CTL_ENA (1L<<5) +#define BNX2_PCICFG_MISC_CONFIG_TARGET_GRC_WORD_SWAP (1L<<6) +#define BNX2_PCICFG_MISC_CONFIG_REG_WINDOW_ENA (1L<<7) +#define BNX2_PCICFG_MISC_CONFIG_CORE_RST_REQ (1L<<8) +#define BNX2_PCICFG_MISC_CONFIG_CORE_RST_BSY (1L<<9) +#define BNX2_PCICFG_MISC_CONFIG_ASIC_METAL_REV (0xffL<<16) +#define BNX2_PCICFG_MISC_CONFIG_ASIC_BASE_REV (0xfL<<24) +#define BNX2_PCICFG_MISC_CONFIG_ASIC_ID (0xfL<<28) + +#define BNX2_PCICFG_MISC_STATUS 0x0000006c +#define BNX2_PCICFG_MISC_STATUS_INTA_VALUE (1L<<0) +#define BNX2_PCICFG_MISC_STATUS_32BIT_DET (1L<<1) +#define BNX2_PCICFG_MISC_STATUS_M66EN (1L<<2) +#define BNX2_PCICFG_MISC_STATUS_PCIX_DET (1L<<3) +#define BNX2_PCICFG_MISC_STATUS_PCIX_SPEED (0x3L<<4) +#define BNX2_PCICFG_MISC_STATUS_PCIX_SPEED_66 (0L<<4) +#define BNX2_PCICFG_MISC_STATUS_PCIX_SPEED_100 (1L<<4) +#define BNX2_PCICFG_MISC_STATUS_PCIX_SPEED_133 (2L<<4) +#define BNX2_PCICFG_MISC_STATUS_PCIX_SPEED_PCI_MODE (3L<<4) + +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS 0x00000070 +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET (0xfL<<0) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_32MHZ (0L<<0) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_38MHZ (1L<<0) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_48MHZ (2L<<0) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_55MHZ (3L<<0) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_66MHZ (4L<<0) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_80MHZ (5L<<0) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_95MHZ (6L<<0) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_133MHZ (7L<<0) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_LOW (0xfL<<0) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_DISABLE (1L<<6) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_ALT (1L<<7) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC (0x7L<<8) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_UNDEF (0L<<8) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_12 (1L<<8) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_6 (2L<<8) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_62 (4L<<8) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PLAY_DEAD (1L<<11) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED (0xfL<<12) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_100 (0L<<12) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_80 (1L<<12) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_50 (2L<<12) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_40 (4L<<12) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_25 (8L<<12) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_PLL_STOP (1L<<16) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_PLL_STOP (1L<<17) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_RESERVED_18 (1L<<18) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_USE_SPD_DET (1L<<19) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_RESERVED (0xfffL<<20) + +#define BNX2_PCICFG_REG_WINDOW_ADDRESS 0x00000078 +#define BNX2_PCICFG_REG_WINDOW 0x00000080 +#define BNX2_PCICFG_INT_ACK_CMD 0x00000084 +#define BNX2_PCICFG_INT_ACK_CMD_INDEX (0xffffL<<0) +#define BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID (1L<<16) +#define BNX2_PCICFG_INT_ACK_CMD_USE_INT_HC_PARAM (1L<<17) +#define BNX2_PCICFG_INT_ACK_CMD_MASK_INT (1L<<18) + +#define BNX2_PCICFG_STATUS_BIT_SET_CMD 0x00000088 +#define BNX2_PCICFG_STATUS_BIT_CLEAR_CMD 0x0000008c +#define BNX2_PCICFG_MAILBOX_QUEUE_ADDR 0x00000090 +#define BNX2_PCICFG_MAILBOX_QUEUE_DATA 0x00000094 + + +/* + * pci_reg definition + * offset: 0x400 + */ +#define BNX2_PCI_GRC_WINDOW_ADDR 0x00000400 +#define BNX2_PCI_GRC_WINDOW_ADDR_PCI_GRC_WINDOW_ADDR_VALUE (0x3ffffL<<8) + +#define BNX2_PCI_CONFIG_1 0x00000404 +#define BNX2_PCI_CONFIG_1_READ_BOUNDARY (0x7L<<8) +#define BNX2_PCI_CONFIG_1_READ_BOUNDARY_OFF (0L<<8) +#define BNX2_PCI_CONFIG_1_READ_BOUNDARY_16 (1L<<8) +#define BNX2_PCI_CONFIG_1_READ_BOUNDARY_32 (2L<<8) +#define BNX2_PCI_CONFIG_1_READ_BOUNDARY_64 (3L<<8) +#define BNX2_PCI_CONFIG_1_READ_BOUNDARY_128 (4L<<8) +#define BNX2_PCI_CONFIG_1_READ_BOUNDARY_256 (5L<<8) +#define BNX2_PCI_CONFIG_1_READ_BOUNDARY_512 (6L<<8) +#define BNX2_PCI_CONFIG_1_READ_BOUNDARY_1024 (7L<<8) +#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY (0x7L<<11) +#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY_OFF (0L<<11) +#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY_16 (1L<<11) +#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY_32 (2L<<11) +#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY_64 (3L<<11) +#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY_128 (4L<<11) +#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY_256 (5L<<11) +#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY_512 (6L<<11) +#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY_1024 (7L<<11) + +#define BNX2_PCI_CONFIG_2 0x00000408 +#define BNX2_PCI_CONFIG_2_BAR1_SIZE (0xfL<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_DISABLED (0L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_64K (1L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_128K (2L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_256K (3L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_512K (4L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_1M (5L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_2M (6L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_4M (7L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_8M (8L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_16M (9L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_32M (10L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_64M (11L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_128M (12L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_256M (13L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_512M (14L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_1G (15L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_64ENA (1L<<4) +#define BNX2_PCI_CONFIG_2_EXP_ROM_RETRY (1L<<5) +#define BNX2_PCI_CONFIG_2_CFG_CYCLE_RETRY (1L<<6) +#define BNX2_PCI_CONFIG_2_FIRST_CFG_DONE (1L<<7) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE (0xffL<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_DISABLED (0L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_1K (1L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_2K (2L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_4K (3L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_8K (4L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_16K (5L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_32K (6L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_64K (7L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_128K (8L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_256K (9L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_512K (10L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_1M (11L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_2M (12L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_4M (13L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_8M (14L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_16M (15L<<8) +#define BNX2_PCI_CONFIG_2_MAX_SPLIT_LIMIT (0x1fL<<16) +#define BNX2_PCI_CONFIG_2_MAX_READ_LIMIT (0x3L<<21) +#define BNX2_PCI_CONFIG_2_MAX_READ_LIMIT_512 (0L<<21) +#define BNX2_PCI_CONFIG_2_MAX_READ_LIMIT_1K (1L<<21) +#define BNX2_PCI_CONFIG_2_MAX_READ_LIMIT_2K (2L<<21) +#define BNX2_PCI_CONFIG_2_MAX_READ_LIMIT_4K (3L<<21) +#define BNX2_PCI_CONFIG_2_FORCE_32_BIT_MSTR (1L<<23) +#define BNX2_PCI_CONFIG_2_FORCE_32_BIT_TGT (1L<<24) +#define BNX2_PCI_CONFIG_2_KEEP_REQ_ASSERT (1L<<25) + +#define BNX2_PCI_CONFIG_3 0x0000040c +#define BNX2_PCI_CONFIG_3_STICKY_BYTE (0xffL<<0) +#define BNX2_PCI_CONFIG_3_FORCE_PME (1L<<24) +#define BNX2_PCI_CONFIG_3_PME_STATUS (1L<<25) +#define BNX2_PCI_CONFIG_3_PME_ENABLE (1L<<26) +#define BNX2_PCI_CONFIG_3_PM_STATE (0x3L<<27) +#define BNX2_PCI_CONFIG_3_VAUX_PRESET (1L<<30) +#define BNX2_PCI_CONFIG_3_PCI_POWER (1L<<31) + +#define BNX2_PCI_PM_DATA_A 0x00000410 +#define BNX2_PCI_PM_DATA_A_PM_DATA_0_PRG (0xffL<<0) +#define BNX2_PCI_PM_DATA_A_PM_DATA_1_PRG (0xffL<<8) +#define BNX2_PCI_PM_DATA_A_PM_DATA_2_PRG (0xffL<<16) +#define BNX2_PCI_PM_DATA_A_PM_DATA_3_PRG (0xffL<<24) + +#define BNX2_PCI_PM_DATA_B 0x00000414 +#define BNX2_PCI_PM_DATA_B_PM_DATA_4_PRG (0xffL<<0) +#define BNX2_PCI_PM_DATA_B_PM_DATA_5_PRG (0xffL<<8) +#define BNX2_PCI_PM_DATA_B_PM_DATA_6_PRG (0xffL<<16) +#define BNX2_PCI_PM_DATA_B_PM_DATA_7_PRG (0xffL<<24) + +#define BNX2_PCI_SWAP_DIAG0 0x00000418 +#define BNX2_PCI_SWAP_DIAG1 0x0000041c +#define BNX2_PCI_EXP_ROM_ADDR 0x00000420 +#define BNX2_PCI_EXP_ROM_ADDR_ADDRESS (0x3fffffL<<2) +#define BNX2_PCI_EXP_ROM_ADDR_REQ (1L<<31) + +#define BNX2_PCI_EXP_ROM_DATA 0x00000424 +#define BNX2_PCI_VPD_INTF 0x00000428 +#define BNX2_PCI_VPD_INTF_INTF_REQ (1L<<0) + +#define BNX2_PCI_VPD_ADDR_FLAG 0x0000042c +#define BNX2_PCI_VPD_ADDR_FLAG_ADDRESS (0x1fff<<2) +#define BNX2_PCI_VPD_ADDR_FLAG_WR (1<<15) + +#define BNX2_PCI_VPD_DATA 0x00000430 +#define BNX2_PCI_ID_VAL1 0x00000434 +#define BNX2_PCI_ID_VAL1_DEVICE_ID (0xffffL<<0) +#define BNX2_PCI_ID_VAL1_VENDOR_ID (0xffffL<<16) + +#define BNX2_PCI_ID_VAL2 0x00000438 +#define BNX2_PCI_ID_VAL2_SUBSYSTEM_VENDOR_ID (0xffffL<<0) +#define BNX2_PCI_ID_VAL2_SUBSYSTEM_ID (0xffffL<<16) + +#define BNX2_PCI_ID_VAL3 0x0000043c +#define BNX2_PCI_ID_VAL3_CLASS_CODE (0xffffffL<<0) +#define BNX2_PCI_ID_VAL3_REVISION_ID (0xffL<<24) + +#define BNX2_PCI_ID_VAL4 0x00000440 +#define BNX2_PCI_ID_VAL4_CAP_ENA (0xfL<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_0 (0L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_1 (1L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_2 (2L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_3 (3L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_4 (4L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_5 (5L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_6 (6L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_7 (7L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_8 (8L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_9 (9L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_10 (10L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_11 (11L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_12 (12L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_13 (13L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_14 (14L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_15 (15L<<0) +#define BNX2_PCI_ID_VAL4_PM_SCALE_PRG (0x3L<<6) +#define BNX2_PCI_ID_VAL4_PM_SCALE_PRG_0 (0L<<6) +#define BNX2_PCI_ID_VAL4_PM_SCALE_PRG_1 (1L<<6) +#define BNX2_PCI_ID_VAL4_PM_SCALE_PRG_2 (2L<<6) +#define BNX2_PCI_ID_VAL4_PM_SCALE_PRG_3 (3L<<6) +#define BNX2_PCI_ID_VAL4_MSI_LIMIT (0x7L<<9) +#define BNX2_PCI_ID_VAL4_MSI_ADVERTIZE (0x7L<<12) +#define BNX2_PCI_ID_VAL4_MSI_ENABLE (1L<<15) +#define BNX2_PCI_ID_VAL4_MAX_64_ADVERTIZE (1L<<16) +#define BNX2_PCI_ID_VAL4_MAX_133_ADVERTIZE (1L<<17) +#define BNX2_PCI_ID_VAL4_MAX_MEM_READ_SIZE (0x3L<<21) +#define BNX2_PCI_ID_VAL4_MAX_SPLIT_SIZE (0x7L<<23) +#define BNX2_PCI_ID_VAL4_MAX_CUMULATIVE_SIZE (0x7L<<26) + +#define BNX2_PCI_ID_VAL5 0x00000444 +#define BNX2_PCI_ID_VAL5_D1_SUPPORT (1L<<0) +#define BNX2_PCI_ID_VAL5_D2_SUPPORT (1L<<1) +#define BNX2_PCI_ID_VAL5_PME_IN_D0 (1L<<2) +#define BNX2_PCI_ID_VAL5_PME_IN_D1 (1L<<3) +#define BNX2_PCI_ID_VAL5_PME_IN_D2 (1L<<4) +#define BNX2_PCI_ID_VAL5_PME_IN_D3_HOT (1L<<5) + +#define BNX2_PCI_PCIX_EXTENDED_STATUS 0x00000448 +#define BNX2_PCI_PCIX_EXTENDED_STATUS_NO_SNOOP (1L<<8) +#define BNX2_PCI_PCIX_EXTENDED_STATUS_LONG_BURST (1L<<9) +#define BNX2_PCI_PCIX_EXTENDED_STATUS_SPLIT_COMP_MSG_CLASS (0xfL<<16) +#define BNX2_PCI_PCIX_EXTENDED_STATUS_SPLIT_COMP_MSG_IDX (0xffL<<24) + +#define BNX2_PCI_ID_VAL6 0x0000044c +#define BNX2_PCI_ID_VAL6_MAX_LAT (0xffL<<0) +#define BNX2_PCI_ID_VAL6_MIN_GNT (0xffL<<8) +#define BNX2_PCI_ID_VAL6_BIST (0xffL<<16) + +#define BNX2_PCI_MSI_DATA 0x00000450 +#define BNX2_PCI_MSI_DATA_PCI_MSI_DATA (0xffffL<<0) + +#define BNX2_PCI_MSI_ADDR_H 0x00000454 +#define BNX2_PCI_MSI_ADDR_L 0x00000458 + + +/* + * misc_reg definition + * offset: 0x800 + */ +#define BNX2_MISC_COMMAND 0x00000800 +#define BNX2_MISC_COMMAND_ENABLE_ALL (1L<<0) +#define BNX2_MISC_COMMAND_DISABLE_ALL (1L<<1) +#define BNX2_MISC_COMMAND_CORE_RESET (1L<<4) +#define BNX2_MISC_COMMAND_HARD_RESET (1L<<5) +#define BNX2_MISC_COMMAND_PAR_ERROR (1L<<8) +#define BNX2_MISC_COMMAND_PAR_ERR_RAM (0x7fL<<16) + +#define BNX2_MISC_CFG 0x00000804 +#define BNX2_MISC_CFG_PCI_GRC_TMOUT (1L<<0) +#define BNX2_MISC_CFG_NVM_WR_EN (0x3L<<1) +#define BNX2_MISC_CFG_NVM_WR_EN_PROTECT (0L<<1) +#define BNX2_MISC_CFG_NVM_WR_EN_PCI (1L<<1) +#define BNX2_MISC_CFG_NVM_WR_EN_ALLOW (2L<<1) +#define BNX2_MISC_CFG_NVM_WR_EN_ALLOW2 (3L<<1) +#define BNX2_MISC_CFG_BIST_EN (1L<<3) +#define BNX2_MISC_CFG_CK25_OUT_ALT_SRC (1L<<4) +#define BNX2_MISC_CFG_BYPASS_BSCAN (1L<<5) +#define BNX2_MISC_CFG_BYPASS_EJTAG (1L<<6) +#define BNX2_MISC_CFG_CLK_CTL_OVERRIDE (1L<<7) +#define BNX2_MISC_CFG_LEDMODE (0x3L<<8) +#define BNX2_MISC_CFG_LEDMODE_MAC (0L<<8) +#define BNX2_MISC_CFG_LEDMODE_GPHY1 (1L<<8) +#define BNX2_MISC_CFG_LEDMODE_GPHY2 (2L<<8) + +#define BNX2_MISC_ID 0x00000808 +#define BNX2_MISC_ID_BOND_ID (0xfL<<0) +#define BNX2_MISC_ID_CHIP_METAL (0xffL<<4) +#define BNX2_MISC_ID_CHIP_REV (0xfL<<12) +#define BNX2_MISC_ID_CHIP_NUM (0xffffL<<16) + +#define BNX2_MISC_ENABLE_STATUS_BITS 0x0000080c +#define BNX2_MISC_ENABLE_STATUS_BITS_TX_SCHEDULER_ENABLE (1L<<0) +#define BNX2_MISC_ENABLE_STATUS_BITS_TX_BD_READ_ENABLE (1L<<1) +#define BNX2_MISC_ENABLE_STATUS_BITS_TX_BD_CACHE_ENABLE (1L<<2) +#define BNX2_MISC_ENABLE_STATUS_BITS_TX_PROCESSOR_ENABLE (1L<<3) +#define BNX2_MISC_ENABLE_STATUS_BITS_TX_DMA_ENABLE (1L<<4) +#define BNX2_MISC_ENABLE_STATUS_BITS_TX_PATCHUP_ENABLE (1L<<5) +#define BNX2_MISC_ENABLE_STATUS_BITS_TX_PAYLOAD_Q_ENABLE (1L<<6) +#define BNX2_MISC_ENABLE_STATUS_BITS_TX_HEADER_Q_ENABLE (1L<<7) +#define BNX2_MISC_ENABLE_STATUS_BITS_TX_ASSEMBLER_ENABLE (1L<<8) +#define BNX2_MISC_ENABLE_STATUS_BITS_EMAC_ENABLE (1L<<9) +#define BNX2_MISC_ENABLE_STATUS_BITS_RX_PARSER_MAC_ENABLE (1L<<10) +#define BNX2_MISC_ENABLE_STATUS_BITS_RX_PARSER_CATCHUP_ENABLE (1L<<11) +#define BNX2_MISC_ENABLE_STATUS_BITS_RX_MBUF_ENABLE (1L<<12) +#define BNX2_MISC_ENABLE_STATUS_BITS_RX_LOOKUP_ENABLE (1L<<13) +#define BNX2_MISC_ENABLE_STATUS_BITS_RX_PROCESSOR_ENABLE (1L<<14) +#define BNX2_MISC_ENABLE_STATUS_BITS_RX_V2P_ENABLE (1L<<15) +#define BNX2_MISC_ENABLE_STATUS_BITS_RX_BD_CACHE_ENABLE (1L<<16) +#define BNX2_MISC_ENABLE_STATUS_BITS_RX_DMA_ENABLE (1L<<17) +#define BNX2_MISC_ENABLE_STATUS_BITS_COMPLETION_ENABLE (1L<<18) +#define BNX2_MISC_ENABLE_STATUS_BITS_HOST_COALESCE_ENABLE (1L<<19) +#define BNX2_MISC_ENABLE_STATUS_BITS_MAILBOX_QUEUE_ENABLE (1L<<20) +#define BNX2_MISC_ENABLE_STATUS_BITS_CONTEXT_ENABLE (1L<<21) +#define BNX2_MISC_ENABLE_STATUS_BITS_CMD_SCHEDULER_ENABLE (1L<<22) +#define BNX2_MISC_ENABLE_STATUS_BITS_CMD_PROCESSOR_ENABLE (1L<<23) +#define BNX2_MISC_ENABLE_STATUS_BITS_MGMT_PROCESSOR_ENABLE (1L<<24) +#define BNX2_MISC_ENABLE_STATUS_BITS_TIMER_ENABLE (1L<<25) +#define BNX2_MISC_ENABLE_STATUS_BITS_DMA_ENGINE_ENABLE (1L<<26) +#define BNX2_MISC_ENABLE_STATUS_BITS_UMP_ENABLE (1L<<27) + +#define BNX2_MISC_ENABLE_SET_BITS 0x00000810 +#define BNX2_MISC_ENABLE_SET_BITS_TX_SCHEDULER_ENABLE (1L<<0) +#define BNX2_MISC_ENABLE_SET_BITS_TX_BD_READ_ENABLE (1L<<1) +#define BNX2_MISC_ENABLE_SET_BITS_TX_BD_CACHE_ENABLE (1L<<2) +#define BNX2_MISC_ENABLE_SET_BITS_TX_PROCESSOR_ENABLE (1L<<3) +#define BNX2_MISC_ENABLE_SET_BITS_TX_DMA_ENABLE (1L<<4) +#define BNX2_MISC_ENABLE_SET_BITS_TX_PATCHUP_ENABLE (1L<<5) +#define BNX2_MISC_ENABLE_SET_BITS_TX_PAYLOAD_Q_ENABLE (1L<<6) +#define BNX2_MISC_ENABLE_SET_BITS_TX_HEADER_Q_ENABLE (1L<<7) +#define BNX2_MISC_ENABLE_SET_BITS_TX_ASSEMBLER_ENABLE (1L<<8) +#define BNX2_MISC_ENABLE_SET_BITS_EMAC_ENABLE (1L<<9) +#define BNX2_MISC_ENABLE_SET_BITS_RX_PARSER_MAC_ENABLE (1L<<10) +#define BNX2_MISC_ENABLE_SET_BITS_RX_PARSER_CATCHUP_ENABLE (1L<<11) +#define BNX2_MISC_ENABLE_SET_BITS_RX_MBUF_ENABLE (1L<<12) +#define BNX2_MISC_ENABLE_SET_BITS_RX_LOOKUP_ENABLE (1L<<13) +#define BNX2_MISC_ENABLE_SET_BITS_RX_PROCESSOR_ENABLE (1L<<14) +#define BNX2_MISC_ENABLE_SET_BITS_RX_V2P_ENABLE (1L<<15) +#define BNX2_MISC_ENABLE_SET_BITS_RX_BD_CACHE_ENABLE (1L<<16) +#define BNX2_MISC_ENABLE_SET_BITS_RX_DMA_ENABLE (1L<<17) +#define BNX2_MISC_ENABLE_SET_BITS_COMPLETION_ENABLE (1L<<18) +#define BNX2_MISC_ENABLE_SET_BITS_HOST_COALESCE_ENABLE (1L<<19) +#define BNX2_MISC_ENABLE_SET_BITS_MAILBOX_QUEUE_ENABLE (1L<<20) +#define BNX2_MISC_ENABLE_SET_BITS_CONTEXT_ENABLE (1L<<21) +#define BNX2_MISC_ENABLE_SET_BITS_CMD_SCHEDULER_ENABLE (1L<<22) +#define BNX2_MISC_ENABLE_SET_BITS_CMD_PROCESSOR_ENABLE (1L<<23) +#define BNX2_MISC_ENABLE_SET_BITS_MGMT_PROCESSOR_ENABLE (1L<<24) +#define BNX2_MISC_ENABLE_SET_BITS_TIMER_ENABLE (1L<<25) +#define BNX2_MISC_ENABLE_SET_BITS_DMA_ENGINE_ENABLE (1L<<26) +#define BNX2_MISC_ENABLE_SET_BITS_UMP_ENABLE (1L<<27) + +#define BNX2_MISC_ENABLE_CLR_BITS 0x00000814 +#define BNX2_MISC_ENABLE_CLR_BITS_TX_SCHEDULER_ENABLE (1L<<0) +#define BNX2_MISC_ENABLE_CLR_BITS_TX_BD_READ_ENABLE (1L<<1) +#define BNX2_MISC_ENABLE_CLR_BITS_TX_BD_CACHE_ENABLE (1L<<2) +#define BNX2_MISC_ENABLE_CLR_BITS_TX_PROCESSOR_ENABLE (1L<<3) +#define BNX2_MISC_ENABLE_CLR_BITS_TX_DMA_ENABLE (1L<<4) +#define BNX2_MISC_ENABLE_CLR_BITS_TX_PATCHUP_ENABLE (1L<<5) +#define BNX2_MISC_ENABLE_CLR_BITS_TX_PAYLOAD_Q_ENABLE (1L<<6) +#define BNX2_MISC_ENABLE_CLR_BITS_TX_HEADER_Q_ENABLE (1L<<7) +#define BNX2_MISC_ENABLE_CLR_BITS_TX_ASSEMBLER_ENABLE (1L<<8) +#define BNX2_MISC_ENABLE_CLR_BITS_EMAC_ENABLE (1L<<9) +#define BNX2_MISC_ENABLE_CLR_BITS_RX_PARSER_MAC_ENABLE (1L<<10) +#define BNX2_MISC_ENABLE_CLR_BITS_RX_PARSER_CATCHUP_ENABLE (1L<<11) +#define BNX2_MISC_ENABLE_CLR_BITS_RX_MBUF_ENABLE (1L<<12) +#define BNX2_MISC_ENABLE_CLR_BITS_RX_LOOKUP_ENABLE (1L<<13) +#define BNX2_MISC_ENABLE_CLR_BITS_RX_PROCESSOR_ENABLE (1L<<14) +#define BNX2_MISC_ENABLE_CLR_BITS_RX_V2P_ENABLE (1L<<15) +#define BNX2_MISC_ENABLE_CLR_BITS_RX_BD_CACHE_ENABLE (1L<<16) +#define BNX2_MISC_ENABLE_CLR_BITS_RX_DMA_ENABLE (1L<<17) +#define BNX2_MISC_ENABLE_CLR_BITS_COMPLETION_ENABLE (1L<<18) +#define BNX2_MISC_ENABLE_CLR_BITS_HOST_COALESCE_ENABLE (1L<<19) +#define BNX2_MISC_ENABLE_CLR_BITS_MAILBOX_QUEUE_ENABLE (1L<<20) +#define BNX2_MISC_ENABLE_CLR_BITS_CONTEXT_ENABLE (1L<<21) +#define BNX2_MISC_ENABLE_CLR_BITS_CMD_SCHEDULER_ENABLE (1L<<22) +#define BNX2_MISC_ENABLE_CLR_BITS_CMD_PROCESSOR_ENABLE (1L<<23) +#define BNX2_MISC_ENABLE_CLR_BITS_MGMT_PROCESSOR_ENABLE (1L<<24) +#define BNX2_MISC_ENABLE_CLR_BITS_TIMER_ENABLE (1L<<25) +#define BNX2_MISC_ENABLE_CLR_BITS_DMA_ENGINE_ENABLE (1L<<26) +#define BNX2_MISC_ENABLE_CLR_BITS_UMP_ENABLE (1L<<27) + +#define BNX2_MISC_CLOCK_CONTROL_BITS 0x00000818 +#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET (0xfL<<0) +#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_32MHZ (0L<<0) +#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_38MHZ (1L<<0) +#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_48MHZ (2L<<0) +#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_55MHZ (3L<<0) +#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_66MHZ (4L<<0) +#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_80MHZ (5L<<0) +#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_95MHZ (6L<<0) +#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_133MHZ (7L<<0) +#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_LOW (0xfL<<0) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_DISABLE (1L<<6) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_ALT (1L<<7) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC (0x7L<<8) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_UNDEF (0L<<8) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_12 (1L<<8) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_6 (2L<<8) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_62 (4L<<8) +#define BNX2_MISC_CLOCK_CONTROL_BITS_PLAY_DEAD (1L<<11) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED (0xfL<<12) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_100 (0L<<12) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_80 (1L<<12) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_50 (2L<<12) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_40 (4L<<12) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_25 (8L<<12) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_STOP (1L<<16) +#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_PLL_STOP (1L<<17) +#define BNX2_MISC_CLOCK_CONTROL_BITS_RESERVED_18 (1L<<18) +#define BNX2_MISC_CLOCK_CONTROL_BITS_USE_SPD_DET (1L<<19) +#define BNX2_MISC_CLOCK_CONTROL_BITS_RESERVED (0xfffL<<20) + +#define BNX2_MISC_GPIO 0x0000081c +#define BNX2_MISC_GPIO_VALUE (0xffL<<0) +#define BNX2_MISC_GPIO_SET (0xffL<<8) +#define BNX2_MISC_GPIO_CLR (0xffL<<16) +#define BNX2_MISC_GPIO_FLOAT (0xffL<<24) + +#define BNX2_MISC_GPIO_INT 0x00000820 +#define BNX2_MISC_GPIO_INT_INT_STATE (0xfL<<0) +#define BNX2_MISC_GPIO_INT_OLD_VALUE (0xfL<<8) +#define BNX2_MISC_GPIO_INT_OLD_SET (0xfL<<16) +#define BNX2_MISC_GPIO_INT_OLD_CLR (0xfL<<24) + +#define BNX2_MISC_CONFIG_LFSR 0x00000824 +#define BNX2_MISC_CONFIG_LFSR_DIV (0xffffL<<0) + +#define BNX2_MISC_LFSR_MASK_BITS 0x00000828 +#define BNX2_MISC_LFSR_MASK_BITS_TX_SCHEDULER_ENABLE (1L<<0) +#define BNX2_MISC_LFSR_MASK_BITS_TX_BD_READ_ENABLE (1L<<1) +#define BNX2_MISC_LFSR_MASK_BITS_TX_BD_CACHE_ENABLE (1L<<2) +#define BNX2_MISC_LFSR_MASK_BITS_TX_PROCESSOR_ENABLE (1L<<3) +#define BNX2_MISC_LFSR_MASK_BITS_TX_DMA_ENABLE (1L<<4) +#define BNX2_MISC_LFSR_MASK_BITS_TX_PATCHUP_ENABLE (1L<<5) +#define BNX2_MISC_LFSR_MASK_BITS_TX_PAYLOAD_Q_ENABLE (1L<<6) +#define BNX2_MISC_LFSR_MASK_BITS_TX_HEADER_Q_ENABLE (1L<<7) +#define BNX2_MISC_LFSR_MASK_BITS_TX_ASSEMBLER_ENABLE (1L<<8) +#define BNX2_MISC_LFSR_MASK_BITS_EMAC_ENABLE (1L<<9) +#define BNX2_MISC_LFSR_MASK_BITS_RX_PARSER_MAC_ENABLE (1L<<10) +#define BNX2_MISC_LFSR_MASK_BITS_RX_PARSER_CATCHUP_ENABLE (1L<<11) +#define BNX2_MISC_LFSR_MASK_BITS_RX_MBUF_ENABLE (1L<<12) +#define BNX2_MISC_LFSR_MASK_BITS_RX_LOOKUP_ENABLE (1L<<13) +#define BNX2_MISC_LFSR_MASK_BITS_RX_PROCESSOR_ENABLE (1L<<14) +#define BNX2_MISC_LFSR_MASK_BITS_RX_V2P_ENABLE (1L<<15) +#define BNX2_MISC_LFSR_MASK_BITS_RX_BD_CACHE_ENABLE (1L<<16) +#define BNX2_MISC_LFSR_MASK_BITS_RX_DMA_ENABLE (1L<<17) +#define BNX2_MISC_LFSR_MASK_BITS_COMPLETION_ENABLE (1L<<18) +#define BNX2_MISC_LFSR_MASK_BITS_HOST_COALESCE_ENABLE (1L<<19) +#define BNX2_MISC_LFSR_MASK_BITS_MAILBOX_QUEUE_ENABLE (1L<<20) +#define BNX2_MISC_LFSR_MASK_BITS_CONTEXT_ENABLE (1L<<21) +#define BNX2_MISC_LFSR_MASK_BITS_CMD_SCHEDULER_ENABLE (1L<<22) +#define BNX2_MISC_LFSR_MASK_BITS_CMD_PROCESSOR_ENABLE (1L<<23) +#define BNX2_MISC_LFSR_MASK_BITS_MGMT_PROCESSOR_ENABLE (1L<<24) +#define BNX2_MISC_LFSR_MASK_BITS_TIMER_ENABLE (1L<<25) +#define BNX2_MISC_LFSR_MASK_BITS_DMA_ENGINE_ENABLE (1L<<26) +#define BNX2_MISC_LFSR_MASK_BITS_UMP_ENABLE (1L<<27) + +#define BNX2_MISC_ARB_REQ0 0x0000082c +#define BNX2_MISC_ARB_REQ1 0x00000830 +#define BNX2_MISC_ARB_REQ2 0x00000834 +#define BNX2_MISC_ARB_REQ3 0x00000838 +#define BNX2_MISC_ARB_REQ4 0x0000083c +#define BNX2_MISC_ARB_FREE0 0x00000840 +#define BNX2_MISC_ARB_FREE1 0x00000844 +#define BNX2_MISC_ARB_FREE2 0x00000848 +#define BNX2_MISC_ARB_FREE3 0x0000084c +#define BNX2_MISC_ARB_FREE4 0x00000850 +#define BNX2_MISC_ARB_REQ_STATUS0 0x00000854 +#define BNX2_MISC_ARB_REQ_STATUS1 0x00000858 +#define BNX2_MISC_ARB_REQ_STATUS2 0x0000085c +#define BNX2_MISC_ARB_REQ_STATUS3 0x00000860 +#define BNX2_MISC_ARB_REQ_STATUS4 0x00000864 +#define BNX2_MISC_ARB_GNT0 0x00000868 +#define BNX2_MISC_ARB_GNT0_0 (0x7L<<0) +#define BNX2_MISC_ARB_GNT0_1 (0x7L<<4) +#define BNX2_MISC_ARB_GNT0_2 (0x7L<<8) +#define BNX2_MISC_ARB_GNT0_3 (0x7L<<12) +#define BNX2_MISC_ARB_GNT0_4 (0x7L<<16) +#define BNX2_MISC_ARB_GNT0_5 (0x7L<<20) +#define BNX2_MISC_ARB_GNT0_6 (0x7L<<24) +#define BNX2_MISC_ARB_GNT0_7 (0x7L<<28) + +#define BNX2_MISC_ARB_GNT1 0x0000086c +#define BNX2_MISC_ARB_GNT1_8 (0x7L<<0) +#define BNX2_MISC_ARB_GNT1_9 (0x7L<<4) +#define BNX2_MISC_ARB_GNT1_10 (0x7L<<8) +#define BNX2_MISC_ARB_GNT1_11 (0x7L<<12) +#define BNX2_MISC_ARB_GNT1_12 (0x7L<<16) +#define BNX2_MISC_ARB_GNT1_13 (0x7L<<20) +#define BNX2_MISC_ARB_GNT1_14 (0x7L<<24) +#define BNX2_MISC_ARB_GNT1_15 (0x7L<<28) + +#define BNX2_MISC_ARB_GNT2 0x00000870 +#define BNX2_MISC_ARB_GNT2_16 (0x7L<<0) +#define BNX2_MISC_ARB_GNT2_17 (0x7L<<4) +#define BNX2_MISC_ARB_GNT2_18 (0x7L<<8) +#define BNX2_MISC_ARB_GNT2_19 (0x7L<<12) +#define BNX2_MISC_ARB_GNT2_20 (0x7L<<16) +#define BNX2_MISC_ARB_GNT2_21 (0x7L<<20) +#define BNX2_MISC_ARB_GNT2_22 (0x7L<<24) +#define BNX2_MISC_ARB_GNT2_23 (0x7L<<28) + +#define BNX2_MISC_ARB_GNT3 0x00000874 +#define BNX2_MISC_ARB_GNT3_24 (0x7L<<0) +#define BNX2_MISC_ARB_GNT3_25 (0x7L<<4) +#define BNX2_MISC_ARB_GNT3_26 (0x7L<<8) +#define BNX2_MISC_ARB_GNT3_27 (0x7L<<12) +#define BNX2_MISC_ARB_GNT3_28 (0x7L<<16) +#define BNX2_MISC_ARB_GNT3_29 (0x7L<<20) +#define BNX2_MISC_ARB_GNT3_30 (0x7L<<24) +#define BNX2_MISC_ARB_GNT3_31 (0x7L<<28) + +#define BNX2_MISC_PRBS_CONTROL 0x00000878 +#define BNX2_MISC_PRBS_CONTROL_EN (1L<<0) +#define BNX2_MISC_PRBS_CONTROL_RSTB (1L<<1) +#define BNX2_MISC_PRBS_CONTROL_INV (1L<<2) +#define BNX2_MISC_PRBS_CONTROL_ERR_CLR (1L<<3) +#define BNX2_MISC_PRBS_CONTROL_ORDER (0x3L<<4) +#define BNX2_MISC_PRBS_CONTROL_ORDER_7TH (0L<<4) +#define BNX2_MISC_PRBS_CONTROL_ORDER_15TH (1L<<4) +#define BNX2_MISC_PRBS_CONTROL_ORDER_23RD (2L<<4) +#define BNX2_MISC_PRBS_CONTROL_ORDER_31ST (3L<<4) + +#define BNX2_MISC_PRBS_STATUS 0x0000087c +#define BNX2_MISC_PRBS_STATUS_LOCK (1L<<0) +#define BNX2_MISC_PRBS_STATUS_STKY (1L<<1) +#define BNX2_MISC_PRBS_STATUS_ERRORS (0x3fffL<<2) +#define BNX2_MISC_PRBS_STATUS_STATE (0xfL<<16) + +#define BNX2_MISC_SM_ASF_CONTROL 0x00000880 +#define BNX2_MISC_SM_ASF_CONTROL_ASF_RST (1L<<0) +#define BNX2_MISC_SM_ASF_CONTROL_TSC_EN (1L<<1) +#define BNX2_MISC_SM_ASF_CONTROL_WG_TO (1L<<2) +#define BNX2_MISC_SM_ASF_CONTROL_HB_TO (1L<<3) +#define BNX2_MISC_SM_ASF_CONTROL_PA_TO (1L<<4) +#define BNX2_MISC_SM_ASF_CONTROL_PL_TO (1L<<5) +#define BNX2_MISC_SM_ASF_CONTROL_RT_TO (1L<<6) +#define BNX2_MISC_SM_ASF_CONTROL_SMB_EVENT (1L<<7) +#define BNX2_MISC_SM_ASF_CONTROL_RES (0xfL<<8) +#define BNX2_MISC_SM_ASF_CONTROL_SMB_EN (1L<<12) +#define BNX2_MISC_SM_ASF_CONTROL_SMB_BB_EN (1L<<13) +#define BNX2_MISC_SM_ASF_CONTROL_SMB_NO_ADDR_FILT (1L<<14) +#define BNX2_MISC_SM_ASF_CONTROL_SMB_AUTOREAD (1L<<15) +#define BNX2_MISC_SM_ASF_CONTROL_NIC_SMB_ADDR1 (0x3fL<<16) +#define BNX2_MISC_SM_ASF_CONTROL_NIC_SMB_ADDR2 (0x3fL<<24) +#define BNX2_MISC_SM_ASF_CONTROL_EN_NIC_SMB_ADDR_0 (1L<<30) +#define BNX2_MISC_SM_ASF_CONTROL_SMB_EARLY_ATTN (1L<<31) + +#define BNX2_MISC_SMB_IN 0x00000884 +#define BNX2_MISC_SMB_IN_DAT_IN (0xffL<<0) +#define BNX2_MISC_SMB_IN_RDY (1L<<8) +#define BNX2_MISC_SMB_IN_DONE (1L<<9) +#define BNX2_MISC_SMB_IN_FIRSTBYTE (1L<<10) +#define BNX2_MISC_SMB_IN_STATUS (0x7L<<11) +#define BNX2_MISC_SMB_IN_STATUS_OK (0x0L<<11) +#define BNX2_MISC_SMB_IN_STATUS_PEC (0x1L<<11) +#define BNX2_MISC_SMB_IN_STATUS_OFLOW (0x2L<<11) +#define BNX2_MISC_SMB_IN_STATUS_STOP (0x3L<<11) +#define BNX2_MISC_SMB_IN_STATUS_TIMEOUT (0x4L<<11) + +#define BNX2_MISC_SMB_OUT 0x00000888 +#define BNX2_MISC_SMB_OUT_DAT_OUT (0xffL<<0) +#define BNX2_MISC_SMB_OUT_RDY (1L<<8) +#define BNX2_MISC_SMB_OUT_START (1L<<9) +#define BNX2_MISC_SMB_OUT_LAST (1L<<10) +#define BNX2_MISC_SMB_OUT_ACC_TYPE (1L<<11) +#define BNX2_MISC_SMB_OUT_ENB_PEC (1L<<12) +#define BNX2_MISC_SMB_OUT_GET_RX_LEN (1L<<13) +#define BNX2_MISC_SMB_OUT_SMB_READ_LEN (0x3fL<<14) +#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS (0xfL<<20) +#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_OK (0L<<20) +#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_FIRST_NACK (1L<<20) +#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_SUB_NACK (9L<<20) +#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_UFLOW (2L<<20) +#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_STOP (3L<<20) +#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_TIMEOUT (4L<<20) +#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_FIRST_LOST (5L<<20) +#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_SUB_LOST (0xdL<<20) +#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_BADACK (0x6L<<20) +#define BNX2_MISC_SMB_OUT_SMB_OUT_SLAVEMODE (1L<<24) +#define BNX2_MISC_SMB_OUT_SMB_OUT_DAT_EN (1L<<25) +#define BNX2_MISC_SMB_OUT_SMB_OUT_DAT_IN (1L<<26) +#define BNX2_MISC_SMB_OUT_SMB_OUT_CLK_EN (1L<<27) +#define BNX2_MISC_SMB_OUT_SMB_OUT_CLK_IN (1L<<28) + +#define BNX2_MISC_SMB_WATCHDOG 0x0000088c +#define BNX2_MISC_SMB_WATCHDOG_WATCHDOG (0xffffL<<0) + +#define BNX2_MISC_SMB_HEARTBEAT 0x00000890 +#define BNX2_MISC_SMB_HEARTBEAT_HEARTBEAT (0xffffL<<0) + +#define BNX2_MISC_SMB_POLL_ASF 0x00000894 +#define BNX2_MISC_SMB_POLL_ASF_POLL_ASF (0xffffL<<0) + +#define BNX2_MISC_SMB_POLL_LEGACY 0x00000898 +#define BNX2_MISC_SMB_POLL_LEGACY_POLL_LEGACY (0xffffL<<0) + +#define BNX2_MISC_SMB_RETRAN 0x0000089c +#define BNX2_MISC_SMB_RETRAN_RETRAN (0xffL<<0) + +#define BNX2_MISC_SMB_TIMESTAMP 0x000008a0 +#define BNX2_MISC_SMB_TIMESTAMP_TIMESTAMP (0xffffffffL<<0) + +#define BNX2_MISC_PERR_ENA0 0x000008a4 +#define BNX2_MISC_PERR_ENA0_COM_MISC_CTXC (1L<<0) +#define BNX2_MISC_PERR_ENA0_COM_MISC_REGF (1L<<1) +#define BNX2_MISC_PERR_ENA0_COM_MISC_SCPAD (1L<<2) +#define BNX2_MISC_PERR_ENA0_CP_MISC_CTXC (1L<<3) +#define BNX2_MISC_PERR_ENA0_CP_MISC_REGF (1L<<4) +#define BNX2_MISC_PERR_ENA0_CP_MISC_SCPAD (1L<<5) +#define BNX2_MISC_PERR_ENA0_CS_MISC_TMEM (1L<<6) +#define BNX2_MISC_PERR_ENA0_CTX_MISC_ACCM0 (1L<<7) +#define BNX2_MISC_PERR_ENA0_CTX_MISC_ACCM1 (1L<<8) +#define BNX2_MISC_PERR_ENA0_CTX_MISC_ACCM2 (1L<<9) +#define BNX2_MISC_PERR_ENA0_CTX_MISC_ACCM3 (1L<<10) +#define BNX2_MISC_PERR_ENA0_CTX_MISC_ACCM4 (1L<<11) +#define BNX2_MISC_PERR_ENA0_CTX_MISC_ACCM5 (1L<<12) +#define BNX2_MISC_PERR_ENA0_CTX_MISC_PGTBL (1L<<13) +#define BNX2_MISC_PERR_ENA0_DMAE_MISC_DR0 (1L<<14) +#define BNX2_MISC_PERR_ENA0_DMAE_MISC_DR1 (1L<<15) +#define BNX2_MISC_PERR_ENA0_DMAE_MISC_DR2 (1L<<16) +#define BNX2_MISC_PERR_ENA0_DMAE_MISC_DR3 (1L<<17) +#define BNX2_MISC_PERR_ENA0_DMAE_MISC_DR4 (1L<<18) +#define BNX2_MISC_PERR_ENA0_DMAE_MISC_DW0 (1L<<19) +#define BNX2_MISC_PERR_ENA0_DMAE_MISC_DW1 (1L<<20) +#define BNX2_MISC_PERR_ENA0_DMAE_MISC_DW2 (1L<<21) +#define BNX2_MISC_PERR_ENA0_HC_MISC_DMA (1L<<22) +#define BNX2_MISC_PERR_ENA0_MCP_MISC_REGF (1L<<23) +#define BNX2_MISC_PERR_ENA0_MCP_MISC_SCPAD (1L<<24) +#define BNX2_MISC_PERR_ENA0_MQ_MISC_CTX (1L<<25) +#define BNX2_MISC_PERR_ENA0_RBDC_MISC (1L<<26) +#define BNX2_MISC_PERR_ENA0_RBUF_MISC_MB (1L<<27) +#define BNX2_MISC_PERR_ENA0_RBUF_MISC_PTR (1L<<28) +#define BNX2_MISC_PERR_ENA0_RDE_MISC_RPC (1L<<29) +#define BNX2_MISC_PERR_ENA0_RDE_MISC_RPM (1L<<30) +#define BNX2_MISC_PERR_ENA0_RV2P_MISC_CB0REGS (1L<<31) + +#define BNX2_MISC_PERR_ENA1 0x000008a8 +#define BNX2_MISC_PERR_ENA1_RV2P_MISC_CB1REGS (1L<<0) +#define BNX2_MISC_PERR_ENA1_RV2P_MISC_P1IRAM (1L<<1) +#define BNX2_MISC_PERR_ENA1_RV2P_MISC_P2IRAM (1L<<2) +#define BNX2_MISC_PERR_ENA1_RXP_MISC_CTXC (1L<<3) +#define BNX2_MISC_PERR_ENA1_RXP_MISC_REGF (1L<<4) +#define BNX2_MISC_PERR_ENA1_RXP_MISC_SCPAD (1L<<5) +#define BNX2_MISC_PERR_ENA1_RXP_MISC_RBUFC (1L<<6) +#define BNX2_MISC_PERR_ENA1_TBDC_MISC (1L<<7) +#define BNX2_MISC_PERR_ENA1_TDMA_MISC (1L<<8) +#define BNX2_MISC_PERR_ENA1_THBUF_MISC_MB0 (1L<<9) +#define BNX2_MISC_PERR_ENA1_THBUF_MISC_MB1 (1L<<10) +#define BNX2_MISC_PERR_ENA1_TPAT_MISC_REGF (1L<<11) +#define BNX2_MISC_PERR_ENA1_TPAT_MISC_SCPAD (1L<<12) +#define BNX2_MISC_PERR_ENA1_TPBUF_MISC_MB (1L<<13) +#define BNX2_MISC_PERR_ENA1_TSCH_MISC_LR (1L<<14) +#define BNX2_MISC_PERR_ENA1_TXP_MISC_CTXC (1L<<15) +#define BNX2_MISC_PERR_ENA1_TXP_MISC_REGF (1L<<16) +#define BNX2_MISC_PERR_ENA1_TXP_MISC_SCPAD (1L<<17) +#define BNX2_MISC_PERR_ENA1_UMP_MISC_FIORX (1L<<18) +#define BNX2_MISC_PERR_ENA1_UMP_MISC_FIOTX (1L<<19) +#define BNX2_MISC_PERR_ENA1_UMP_MISC_RX (1L<<20) +#define BNX2_MISC_PERR_ENA1_UMP_MISC_TX (1L<<21) +#define BNX2_MISC_PERR_ENA1_RDMAQ_MISC (1L<<22) +#define BNX2_MISC_PERR_ENA1_CSQ_MISC (1L<<23) +#define BNX2_MISC_PERR_ENA1_CPQ_MISC (1L<<24) +#define BNX2_MISC_PERR_ENA1_MCPQ_MISC (1L<<25) +#define BNX2_MISC_PERR_ENA1_RV2PMQ_MISC (1L<<26) +#define BNX2_MISC_PERR_ENA1_RV2PPQ_MISC (1L<<27) +#define BNX2_MISC_PERR_ENA1_RV2PTQ_MISC (1L<<28) +#define BNX2_MISC_PERR_ENA1_RXPQ_MISC (1L<<29) +#define BNX2_MISC_PERR_ENA1_RXPCQ_MISC (1L<<30) +#define BNX2_MISC_PERR_ENA1_RLUPQ_MISC (1L<<31) + +#define BNX2_MISC_PERR_ENA2 0x000008ac +#define BNX2_MISC_PERR_ENA2_COMQ_MISC (1L<<0) +#define BNX2_MISC_PERR_ENA2_COMXQ_MISC (1L<<1) +#define BNX2_MISC_PERR_ENA2_COMTQ_MISC (1L<<2) +#define BNX2_MISC_PERR_ENA2_TSCHQ_MISC (1L<<3) +#define BNX2_MISC_PERR_ENA2_TBDRQ_MISC (1L<<4) +#define BNX2_MISC_PERR_ENA2_TXPQ_MISC (1L<<5) +#define BNX2_MISC_PERR_ENA2_TDMAQ_MISC (1L<<6) +#define BNX2_MISC_PERR_ENA2_TPATQ_MISC (1L<<7) +#define BNX2_MISC_PERR_ENA2_TASQ_MISC (1L<<8) + +#define BNX2_MISC_DEBUG_VECTOR_SEL 0x000008b0 +#define BNX2_MISC_DEBUG_VECTOR_SEL_0 (0xfffL<<0) +#define BNX2_MISC_DEBUG_VECTOR_SEL_1 (0xfffL<<12) + +#define BNX2_MISC_VREG_CONTROL 0x000008b4 +#define BNX2_MISC_VREG_CONTROL_1_2 (0xfL<<0) +#define BNX2_MISC_VREG_CONTROL_2_5 (0xfL<<4) + +#define BNX2_MISC_FINAL_CLK_CTL_VAL 0x000008b8 +#define BNX2_MISC_FINAL_CLK_CTL_VAL_MISC_FINAL_CLK_CTL_VAL (0x3ffffffL<<6) + +#define BNX2_MISC_UNUSED0 0x000008bc + + +/* + * nvm_reg definition + * offset: 0x6400 + */ +#define BNX2_NVM_COMMAND 0x00006400 +#define BNX2_NVM_COMMAND_RST (1L<<0) +#define BNX2_NVM_COMMAND_DONE (1L<<3) +#define BNX2_NVM_COMMAND_DOIT (1L<<4) +#define BNX2_NVM_COMMAND_WR (1L<<5) +#define BNX2_NVM_COMMAND_ERASE (1L<<6) +#define BNX2_NVM_COMMAND_FIRST (1L<<7) +#define BNX2_NVM_COMMAND_LAST (1L<<8) +#define BNX2_NVM_COMMAND_WREN (1L<<16) +#define BNX2_NVM_COMMAND_WRDI (1L<<17) +#define BNX2_NVM_COMMAND_EWSR (1L<<18) +#define BNX2_NVM_COMMAND_WRSR (1L<<19) + +#define BNX2_NVM_STATUS 0x00006404 +#define BNX2_NVM_STATUS_PI_FSM_STATE (0xfL<<0) +#define BNX2_NVM_STATUS_EE_FSM_STATE (0xfL<<4) +#define BNX2_NVM_STATUS_EQ_FSM_STATE (0xfL<<8) + +#define BNX2_NVM_WRITE 0x00006408 +#define BNX2_NVM_WRITE_NVM_WRITE_VALUE (0xffffffffL<<0) +#define BNX2_NVM_WRITE_NVM_WRITE_VALUE_BIT_BANG (0L<<0) +#define BNX2_NVM_WRITE_NVM_WRITE_VALUE_EECLK (1L<<0) +#define BNX2_NVM_WRITE_NVM_WRITE_VALUE_EEDATA (2L<<0) +#define BNX2_NVM_WRITE_NVM_WRITE_VALUE_SCLK (4L<<0) +#define BNX2_NVM_WRITE_NVM_WRITE_VALUE_CS_B (8L<<0) +#define BNX2_NVM_WRITE_NVM_WRITE_VALUE_SO (16L<<0) +#define BNX2_NVM_WRITE_NVM_WRITE_VALUE_SI (32L<<0) + +#define BNX2_NVM_ADDR 0x0000640c +#define BNX2_NVM_ADDR_NVM_ADDR_VALUE (0xffffffL<<0) +#define BNX2_NVM_ADDR_NVM_ADDR_VALUE_BIT_BANG (0L<<0) +#define BNX2_NVM_ADDR_NVM_ADDR_VALUE_EECLK (1L<<0) +#define BNX2_NVM_ADDR_NVM_ADDR_VALUE_EEDATA (2L<<0) +#define BNX2_NVM_ADDR_NVM_ADDR_VALUE_SCLK (4L<<0) +#define BNX2_NVM_ADDR_NVM_ADDR_VALUE_CS_B (8L<<0) +#define BNX2_NVM_ADDR_NVM_ADDR_VALUE_SO (16L<<0) +#define BNX2_NVM_ADDR_NVM_ADDR_VALUE_SI (32L<<0) + +#define BNX2_NVM_READ 0x00006410 +#define BNX2_NVM_READ_NVM_READ_VALUE (0xffffffffL<<0) +#define BNX2_NVM_READ_NVM_READ_VALUE_BIT_BANG (0L<<0) +#define BNX2_NVM_READ_NVM_READ_VALUE_EECLK (1L<<0) +#define BNX2_NVM_READ_NVM_READ_VALUE_EEDATA (2L<<0) +#define BNX2_NVM_READ_NVM_READ_VALUE_SCLK (4L<<0) +#define BNX2_NVM_READ_NVM_READ_VALUE_CS_B (8L<<0) +#define BNX2_NVM_READ_NVM_READ_VALUE_SO (16L<<0) +#define BNX2_NVM_READ_NVM_READ_VALUE_SI (32L<<0) + +#define BNX2_NVM_CFG1 0x00006414 +#define BNX2_NVM_CFG1_FLASH_MODE (1L<<0) +#define BNX2_NVM_CFG1_BUFFER_MODE (1L<<1) +#define BNX2_NVM_CFG1_PASS_MODE (1L<<2) +#define BNX2_NVM_CFG1_BITBANG_MODE (1L<<3) +#define BNX2_NVM_CFG1_STATUS_BIT (0x7L<<4) +#define BNX2_NVM_CFG1_STATUS_BIT_FLASH_RDY (0L<<4) +#define BNX2_NVM_CFG1_STATUS_BIT_BUFFER_RDY (7L<<4) +#define BNX2_NVM_CFG1_SPI_CLK_DIV (0xfL<<7) +#define BNX2_NVM_CFG1_SEE_CLK_DIV (0x7ffL<<11) +#define BNX2_NVM_CFG1_PROTECT_MODE (1L<<24) +#define BNX2_NVM_CFG1_FLASH_SIZE (1L<<25) +#define BNX2_NVM_CFG1_COMPAT_BYPASSS (1L<<31) + +#define BNX2_NVM_CFG2 0x00006418 +#define BNX2_NVM_CFG2_ERASE_CMD (0xffL<<0) +#define BNX2_NVM_CFG2_DUMMY (0xffL<<8) +#define BNX2_NVM_CFG2_STATUS_CMD (0xffL<<16) + +#define BNX2_NVM_CFG3 0x0000641c +#define BNX2_NVM_CFG3_BUFFER_RD_CMD (0xffL<<0) +#define BNX2_NVM_CFG3_WRITE_CMD (0xffL<<8) +#define BNX2_NVM_CFG3_BUFFER_WRITE_CMD (0xffL<<16) +#define BNX2_NVM_CFG3_READ_CMD (0xffL<<24) + +#define BNX2_NVM_SW_ARB 0x00006420 +#define BNX2_NVM_SW_ARB_ARB_REQ_SET0 (1L<<0) +#define BNX2_NVM_SW_ARB_ARB_REQ_SET1 (1L<<1) +#define BNX2_NVM_SW_ARB_ARB_REQ_SET2 (1L<<2) +#define BNX2_NVM_SW_ARB_ARB_REQ_SET3 (1L<<3) +#define BNX2_NVM_SW_ARB_ARB_REQ_CLR0 (1L<<4) +#define BNX2_NVM_SW_ARB_ARB_REQ_CLR1 (1L<<5) +#define BNX2_NVM_SW_ARB_ARB_REQ_CLR2 (1L<<6) +#define BNX2_NVM_SW_ARB_ARB_REQ_CLR3 (1L<<7) +#define BNX2_NVM_SW_ARB_ARB_ARB0 (1L<<8) +#define BNX2_NVM_SW_ARB_ARB_ARB1 (1L<<9) +#define BNX2_NVM_SW_ARB_ARB_ARB2 (1L<<10) +#define BNX2_NVM_SW_ARB_ARB_ARB3 (1L<<11) +#define BNX2_NVM_SW_ARB_REQ0 (1L<<12) +#define BNX2_NVM_SW_ARB_REQ1 (1L<<13) +#define BNX2_NVM_SW_ARB_REQ2 (1L<<14) +#define BNX2_NVM_SW_ARB_REQ3 (1L<<15) + +#define BNX2_NVM_ACCESS_ENABLE 0x00006424 +#define BNX2_NVM_ACCESS_ENABLE_EN (1L<<0) +#define BNX2_NVM_ACCESS_ENABLE_WR_EN (1L<<1) + +#define BNX2_NVM_WRITE1 0x00006428 +#define BNX2_NVM_WRITE1_WREN_CMD (0xffL<<0) +#define BNX2_NVM_WRITE1_WRDI_CMD (0xffL<<8) +#define BNX2_NVM_WRITE1_SR_DATA (0xffL<<16) + + + +/* + * dma_reg definition + * offset: 0xc00 + */ +#define BNX2_DMA_COMMAND 0x00000c00 +#define BNX2_DMA_COMMAND_ENABLE (1L<<0) + +#define BNX2_DMA_STATUS 0x00000c04 +#define BNX2_DMA_STATUS_PAR_ERROR_STATE (1L<<0) +#define BNX2_DMA_STATUS_READ_TRANSFERS_STAT (1L<<16) +#define BNX2_DMA_STATUS_READ_DELAY_PCI_CLKS_STAT (1L<<17) +#define BNX2_DMA_STATUS_BIG_READ_TRANSFERS_STAT (1L<<18) +#define BNX2_DMA_STATUS_BIG_READ_DELAY_PCI_CLKS_STAT (1L<<19) +#define BNX2_DMA_STATUS_BIG_READ_RETRY_AFTER_DATA_STAT (1L<<20) +#define BNX2_DMA_STATUS_WRITE_TRANSFERS_STAT (1L<<21) +#define BNX2_DMA_STATUS_WRITE_DELAY_PCI_CLKS_STAT (1L<<22) +#define BNX2_DMA_STATUS_BIG_WRITE_TRANSFERS_STAT (1L<<23) +#define BNX2_DMA_STATUS_BIG_WRITE_DELAY_PCI_CLKS_STAT (1L<<24) +#define BNX2_DMA_STATUS_BIG_WRITE_RETRY_AFTER_DATA_STAT (1L<<25) + +#define BNX2_DMA_CONFIG 0x00000c08 +#define BNX2_DMA_CONFIG_DATA_BYTE_SWAP (1L<<0) +#define BNX2_DMA_CONFIG_DATA_WORD_SWAP (1L<<1) +#define BNX2_DMA_CONFIG_CNTL_BYTE_SWAP (1L<<4) +#define BNX2_DMA_CONFIG_CNTL_WORD_SWAP (1L<<5) +#define BNX2_DMA_CONFIG_ONE_DMA (1L<<6) +#define BNX2_DMA_CONFIG_CNTL_TWO_DMA (1L<<7) +#define BNX2_DMA_CONFIG_CNTL_FPGA_MODE (1L<<8) +#define BNX2_DMA_CONFIG_CNTL_PING_PONG_DMA (1L<<10) +#define BNX2_DMA_CONFIG_CNTL_PCI_COMP_DLY (1L<<11) +#define BNX2_DMA_CONFIG_NO_RCHANS_IN_USE (0xfL<<12) +#define BNX2_DMA_CONFIG_NO_WCHANS_IN_USE (0xfL<<16) +#define BNX2_DMA_CONFIG_PCI_CLK_CMP_BITS (0x7L<<20) +#define BNX2_DMA_CONFIG_PCI_FAST_CLK_CMP (1L<<23) +#define BNX2_DMA_CONFIG_BIG_SIZE (0xfL<<24) +#define BNX2_DMA_CONFIG_BIG_SIZE_NONE (0x0L<<24) +#define BNX2_DMA_CONFIG_BIG_SIZE_64 (0x1L<<24) +#define BNX2_DMA_CONFIG_BIG_SIZE_128 (0x2L<<24) +#define BNX2_DMA_CONFIG_BIG_SIZE_256 (0x4L<<24) +#define BNX2_DMA_CONFIG_BIG_SIZE_512 (0x8L<<24) + +#define BNX2_DMA_BLACKOUT 0x00000c0c +#define BNX2_DMA_BLACKOUT_RD_RETRY_BLACKOUT (0xffL<<0) +#define BNX2_DMA_BLACKOUT_2ND_RD_RETRY_BLACKOUT (0xffL<<8) +#define BNX2_DMA_BLACKOUT_WR_RETRY_BLACKOUT (0xffL<<16) + +#define BNX2_DMA_RCHAN_STAT 0x00000c30 +#define BNX2_DMA_RCHAN_STAT_COMP_CODE_0 (0x7L<<0) +#define BNX2_DMA_RCHAN_STAT_PAR_ERR_0 (1L<<3) +#define BNX2_DMA_RCHAN_STAT_COMP_CODE_1 (0x7L<<4) +#define BNX2_DMA_RCHAN_STAT_PAR_ERR_1 (1L<<7) +#define BNX2_DMA_RCHAN_STAT_COMP_CODE_2 (0x7L<<8) +#define BNX2_DMA_RCHAN_STAT_PAR_ERR_2 (1L<<11) +#define BNX2_DMA_RCHAN_STAT_COMP_CODE_3 (0x7L<<12) +#define BNX2_DMA_RCHAN_STAT_PAR_ERR_3 (1L<<15) +#define BNX2_DMA_RCHAN_STAT_COMP_CODE_4 (0x7L<<16) +#define BNX2_DMA_RCHAN_STAT_PAR_ERR_4 (1L<<19) +#define BNX2_DMA_RCHAN_STAT_COMP_CODE_5 (0x7L<<20) +#define BNX2_DMA_RCHAN_STAT_PAR_ERR_5 (1L<<23) +#define BNX2_DMA_RCHAN_STAT_COMP_CODE_6 (0x7L<<24) +#define BNX2_DMA_RCHAN_STAT_PAR_ERR_6 (1L<<27) +#define BNX2_DMA_RCHAN_STAT_COMP_CODE_7 (0x7L<<28) +#define BNX2_DMA_RCHAN_STAT_PAR_ERR_7 (1L<<31) + +#define BNX2_DMA_WCHAN_STAT 0x00000c34 +#define BNX2_DMA_WCHAN_STAT_COMP_CODE_0 (0x7L<<0) +#define BNX2_DMA_WCHAN_STAT_PAR_ERR_0 (1L<<3) +#define BNX2_DMA_WCHAN_STAT_COMP_CODE_1 (0x7L<<4) +#define BNX2_DMA_WCHAN_STAT_PAR_ERR_1 (1L<<7) +#define BNX2_DMA_WCHAN_STAT_COMP_CODE_2 (0x7L<<8) +#define BNX2_DMA_WCHAN_STAT_PAR_ERR_2 (1L<<11) +#define BNX2_DMA_WCHAN_STAT_COMP_CODE_3 (0x7L<<12) +#define BNX2_DMA_WCHAN_STAT_PAR_ERR_3 (1L<<15) +#define BNX2_DMA_WCHAN_STAT_COMP_CODE_4 (0x7L<<16) +#define BNX2_DMA_WCHAN_STAT_PAR_ERR_4 (1L<<19) +#define BNX2_DMA_WCHAN_STAT_COMP_CODE_5 (0x7L<<20) +#define BNX2_DMA_WCHAN_STAT_PAR_ERR_5 (1L<<23) +#define BNX2_DMA_WCHAN_STAT_COMP_CODE_6 (0x7L<<24) +#define BNX2_DMA_WCHAN_STAT_PAR_ERR_6 (1L<<27) +#define BNX2_DMA_WCHAN_STAT_COMP_CODE_7 (0x7L<<28) +#define BNX2_DMA_WCHAN_STAT_PAR_ERR_7 (1L<<31) + +#define BNX2_DMA_RCHAN_ASSIGNMENT 0x00000c38 +#define BNX2_DMA_RCHAN_ASSIGNMENT_0 (0xfL<<0) +#define BNX2_DMA_RCHAN_ASSIGNMENT_1 (0xfL<<4) +#define BNX2_DMA_RCHAN_ASSIGNMENT_2 (0xfL<<8) +#define BNX2_DMA_RCHAN_ASSIGNMENT_3 (0xfL<<12) +#define BNX2_DMA_RCHAN_ASSIGNMENT_4 (0xfL<<16) +#define BNX2_DMA_RCHAN_ASSIGNMENT_5 (0xfL<<20) +#define BNX2_DMA_RCHAN_ASSIGNMENT_6 (0xfL<<24) +#define BNX2_DMA_RCHAN_ASSIGNMENT_7 (0xfL<<28) + +#define BNX2_DMA_WCHAN_ASSIGNMENT 0x00000c3c +#define BNX2_DMA_WCHAN_ASSIGNMENT_0 (0xfL<<0) +#define BNX2_DMA_WCHAN_ASSIGNMENT_1 (0xfL<<4) +#define BNX2_DMA_WCHAN_ASSIGNMENT_2 (0xfL<<8) +#define BNX2_DMA_WCHAN_ASSIGNMENT_3 (0xfL<<12) +#define BNX2_DMA_WCHAN_ASSIGNMENT_4 (0xfL<<16) +#define BNX2_DMA_WCHAN_ASSIGNMENT_5 (0xfL<<20) +#define BNX2_DMA_WCHAN_ASSIGNMENT_6 (0xfL<<24) +#define BNX2_DMA_WCHAN_ASSIGNMENT_7 (0xfL<<28) + +#define BNX2_DMA_RCHAN_STAT_00 0x00000c40 +#define BNX2_DMA_RCHAN_STAT_00_RCHAN_STA_HOST_ADDR_LOW (0xffffffffL<<0) + +#define BNX2_DMA_RCHAN_STAT_01 0x00000c44 +#define BNX2_DMA_RCHAN_STAT_01_RCHAN_STA_HOST_ADDR_HIGH (0xffffffffL<<0) + +#define BNX2_DMA_RCHAN_STAT_02 0x00000c48 +#define BNX2_DMA_RCHAN_STAT_02_LENGTH (0xffffL<<0) +#define BNX2_DMA_RCHAN_STAT_02_WORD_SWAP (1L<<16) +#define BNX2_DMA_RCHAN_STAT_02_BYTE_SWAP (1L<<17) +#define BNX2_DMA_RCHAN_STAT_02_PRIORITY_LVL (1L<<18) + +#define BNX2_DMA_RCHAN_STAT_10 0x00000c4c +#define BNX2_DMA_RCHAN_STAT_11 0x00000c50 +#define BNX2_DMA_RCHAN_STAT_12 0x00000c54 +#define BNX2_DMA_RCHAN_STAT_20 0x00000c58 +#define BNX2_DMA_RCHAN_STAT_21 0x00000c5c +#define BNX2_DMA_RCHAN_STAT_22 0x00000c60 +#define BNX2_DMA_RCHAN_STAT_30 0x00000c64 +#define BNX2_DMA_RCHAN_STAT_31 0x00000c68 +#define BNX2_DMA_RCHAN_STAT_32 0x00000c6c +#define BNX2_DMA_RCHAN_STAT_40 0x00000c70 +#define BNX2_DMA_RCHAN_STAT_41 0x00000c74 +#define BNX2_DMA_RCHAN_STAT_42 0x00000c78 +#define BNX2_DMA_RCHAN_STAT_50 0x00000c7c +#define BNX2_DMA_RCHAN_STAT_51 0x00000c80 +#define BNX2_DMA_RCHAN_STAT_52 0x00000c84 +#define BNX2_DMA_RCHAN_STAT_60 0x00000c88 +#define BNX2_DMA_RCHAN_STAT_61 0x00000c8c +#define BNX2_DMA_RCHAN_STAT_62 0x00000c90 +#define BNX2_DMA_RCHAN_STAT_70 0x00000c94 +#define BNX2_DMA_RCHAN_STAT_71 0x00000c98 +#define BNX2_DMA_RCHAN_STAT_72 0x00000c9c +#define BNX2_DMA_WCHAN_STAT_00 0x00000ca0 +#define BNX2_DMA_WCHAN_STAT_00_WCHAN_STA_HOST_ADDR_LOW (0xffffffffL<<0) + +#define BNX2_DMA_WCHAN_STAT_01 0x00000ca4 +#define BNX2_DMA_WCHAN_STAT_01_WCHAN_STA_HOST_ADDR_HIGH (0xffffffffL<<0) + +#define BNX2_DMA_WCHAN_STAT_02 0x00000ca8 +#define BNX2_DMA_WCHAN_STAT_02_LENGTH (0xffffL<<0) +#define BNX2_DMA_WCHAN_STAT_02_WORD_SWAP (1L<<16) +#define BNX2_DMA_WCHAN_STAT_02_BYTE_SWAP (1L<<17) +#define BNX2_DMA_WCHAN_STAT_02_PRIORITY_LVL (1L<<18) + +#define BNX2_DMA_WCHAN_STAT_10 0x00000cac +#define BNX2_DMA_WCHAN_STAT_11 0x00000cb0 +#define BNX2_DMA_WCHAN_STAT_12 0x00000cb4 +#define BNX2_DMA_WCHAN_STAT_20 0x00000cb8 +#define BNX2_DMA_WCHAN_STAT_21 0x00000cbc +#define BNX2_DMA_WCHAN_STAT_22 0x00000cc0 +#define BNX2_DMA_WCHAN_STAT_30 0x00000cc4 +#define BNX2_DMA_WCHAN_STAT_31 0x00000cc8 +#define BNX2_DMA_WCHAN_STAT_32 0x00000ccc +#define BNX2_DMA_WCHAN_STAT_40 0x00000cd0 +#define BNX2_DMA_WCHAN_STAT_41 0x00000cd4 +#define BNX2_DMA_WCHAN_STAT_42 0x00000cd8 +#define BNX2_DMA_WCHAN_STAT_50 0x00000cdc +#define BNX2_DMA_WCHAN_STAT_51 0x00000ce0 +#define BNX2_DMA_WCHAN_STAT_52 0x00000ce4 +#define BNX2_DMA_WCHAN_STAT_60 0x00000ce8 +#define BNX2_DMA_WCHAN_STAT_61 0x00000cec +#define BNX2_DMA_WCHAN_STAT_62 0x00000cf0 +#define BNX2_DMA_WCHAN_STAT_70 0x00000cf4 +#define BNX2_DMA_WCHAN_STAT_71 0x00000cf8 +#define BNX2_DMA_WCHAN_STAT_72 0x00000cfc +#define BNX2_DMA_ARB_STAT_00 0x00000d00 +#define BNX2_DMA_ARB_STAT_00_MASTER (0xffffL<<0) +#define BNX2_DMA_ARB_STAT_00_MASTER_ENC (0xffL<<16) +#define BNX2_DMA_ARB_STAT_00_CUR_BINMSTR (0xffL<<24) + +#define BNX2_DMA_ARB_STAT_01 0x00000d04 +#define BNX2_DMA_ARB_STAT_01_LPR_RPTR (0xfL<<0) +#define BNX2_DMA_ARB_STAT_01_LPR_WPTR (0xfL<<4) +#define BNX2_DMA_ARB_STAT_01_LPB_RPTR (0xfL<<8) +#define BNX2_DMA_ARB_STAT_01_LPB_WPTR (0xfL<<12) +#define BNX2_DMA_ARB_STAT_01_HPR_RPTR (0xfL<<16) +#define BNX2_DMA_ARB_STAT_01_HPR_WPTR (0xfL<<20) +#define BNX2_DMA_ARB_STAT_01_HPB_RPTR (0xfL<<24) +#define BNX2_DMA_ARB_STAT_01_HPB_WPTR (0xfL<<28) + +#define BNX2_DMA_FUSE_CTRL0_CMD 0x00000f00 +#define BNX2_DMA_FUSE_CTRL0_CMD_PWRUP_DONE (1L<<0) +#define BNX2_DMA_FUSE_CTRL0_CMD_SHIFT_DONE (1L<<1) +#define BNX2_DMA_FUSE_CTRL0_CMD_SHIFT (1L<<2) +#define BNX2_DMA_FUSE_CTRL0_CMD_LOAD (1L<<3) +#define BNX2_DMA_FUSE_CTRL0_CMD_SEL (0xfL<<8) + +#define BNX2_DMA_FUSE_CTRL0_DATA 0x00000f04 +#define BNX2_DMA_FUSE_CTRL1_CMD 0x00000f08 +#define BNX2_DMA_FUSE_CTRL1_CMD_PWRUP_DONE (1L<<0) +#define BNX2_DMA_FUSE_CTRL1_CMD_SHIFT_DONE (1L<<1) +#define BNX2_DMA_FUSE_CTRL1_CMD_SHIFT (1L<<2) +#define BNX2_DMA_FUSE_CTRL1_CMD_LOAD (1L<<3) +#define BNX2_DMA_FUSE_CTRL1_CMD_SEL (0xfL<<8) + +#define BNX2_DMA_FUSE_CTRL1_DATA 0x00000f0c +#define BNX2_DMA_FUSE_CTRL2_CMD 0x00000f10 +#define BNX2_DMA_FUSE_CTRL2_CMD_PWRUP_DONE (1L<<0) +#define BNX2_DMA_FUSE_CTRL2_CMD_SHIFT_DONE (1L<<1) +#define BNX2_DMA_FUSE_CTRL2_CMD_SHIFT (1L<<2) +#define BNX2_DMA_FUSE_CTRL2_CMD_LOAD (1L<<3) +#define BNX2_DMA_FUSE_CTRL2_CMD_SEL (0xfL<<8) + +#define BNX2_DMA_FUSE_CTRL2_DATA 0x00000f14 + + +/* + * context_reg definition + * offset: 0x1000 + */ +#define BNX2_CTX_COMMAND 0x00001000 +#define BNX2_CTX_COMMAND_ENABLED (1L<<0) + +#define BNX2_CTX_STATUS 0x00001004 +#define BNX2_CTX_STATUS_LOCK_WAIT (1L<<0) +#define BNX2_CTX_STATUS_READ_STAT (1L<<16) +#define BNX2_CTX_STATUS_WRITE_STAT (1L<<17) +#define BNX2_CTX_STATUS_ACC_STALL_STAT (1L<<18) +#define BNX2_CTX_STATUS_LOCK_STALL_STAT (1L<<19) + +#define BNX2_CTX_VIRT_ADDR 0x00001008 +#define BNX2_CTX_VIRT_ADDR_VIRT_ADDR (0x7fffL<<6) + +#define BNX2_CTX_PAGE_TBL 0x0000100c +#define BNX2_CTX_PAGE_TBL_PAGE_TBL (0x3fffL<<6) + +#define BNX2_CTX_DATA_ADR 0x00001010 +#define BNX2_CTX_DATA_ADR_DATA_ADR (0x7ffffL<<2) + +#define BNX2_CTX_DATA 0x00001014 +#define BNX2_CTX_LOCK 0x00001018 +#define BNX2_CTX_LOCK_TYPE (0x7L<<0) +#define BNX2_CTX_LOCK_TYPE_LOCK_TYPE_VOID (0x0L<<0) +#define BNX2_CTX_LOCK_TYPE_LOCK_TYPE_COMPLETE (0x7L<<0) +#define BNX2_CTX_LOCK_TYPE_LOCK_TYPE_PROTOCOL (0x1L<<0) +#define BNX2_CTX_LOCK_TYPE_LOCK_TYPE_TX (0x2L<<0) +#define BNX2_CTX_LOCK_TYPE_LOCK_TYPE_TIMER (0x4L<<0) +#define BNX2_CTX_LOCK_CID_VALUE (0x3fffL<<7) +#define BNX2_CTX_LOCK_GRANTED (1L<<26) +#define BNX2_CTX_LOCK_MODE (0x7L<<27) +#define BNX2_CTX_LOCK_MODE_UNLOCK (0x0L<<27) +#define BNX2_CTX_LOCK_MODE_IMMEDIATE (0x1L<<27) +#define BNX2_CTX_LOCK_MODE_SURE (0x2L<<27) +#define BNX2_CTX_LOCK_STATUS (1L<<30) +#define BNX2_CTX_LOCK_REQ (1L<<31) + +#define BNX2_CTX_ACCESS_STATUS 0x00001040 +#define BNX2_CTX_ACCESS_STATUS_MASTERENCODED (0xfL<<0) +#define BNX2_CTX_ACCESS_STATUS_ACCESSMEMORYSM (0x3L<<10) +#define BNX2_CTX_ACCESS_STATUS_PAGETABLEINITSM (0x3L<<12) +#define BNX2_CTX_ACCESS_STATUS_ACCESSMEMORYINITSM (0x3L<<14) +#define BNX2_CTX_ACCESS_STATUS_QUALIFIED_REQUEST (0x7ffL<<17) + +#define BNX2_CTX_DBG_LOCK_STATUS 0x00001044 +#define BNX2_CTX_DBG_LOCK_STATUS_SM (0x3ffL<<0) +#define BNX2_CTX_DBG_LOCK_STATUS_MATCH (0x3ffL<<22) + +#define BNX2_CTX_CHNL_LOCK_STATUS_0 0x00001080 +#define BNX2_CTX_CHNL_LOCK_STATUS_0_CID (0x3fffL<<0) +#define BNX2_CTX_CHNL_LOCK_STATUS_0_TYPE (0x3L<<14) +#define BNX2_CTX_CHNL_LOCK_STATUS_0_MODE (1L<<16) + +#define BNX2_CTX_CHNL_LOCK_STATUS_1 0x00001084 +#define BNX2_CTX_CHNL_LOCK_STATUS_2 0x00001088 +#define BNX2_CTX_CHNL_LOCK_STATUS_3 0x0000108c +#define BNX2_CTX_CHNL_LOCK_STATUS_4 0x00001090 +#define BNX2_CTX_CHNL_LOCK_STATUS_5 0x00001094 +#define BNX2_CTX_CHNL_LOCK_STATUS_6 0x00001098 +#define BNX2_CTX_CHNL_LOCK_STATUS_7 0x0000109c +#define BNX2_CTX_CHNL_LOCK_STATUS_8 0x000010a0 + + +/* + * emac_reg definition + * offset: 0x1400 + */ +#define BNX2_EMAC_MODE 0x00001400 +#define BNX2_EMAC_MODE_RESET (1L<<0) +#define BNX2_EMAC_MODE_HALF_DUPLEX (1L<<1) +#define BNX2_EMAC_MODE_PORT (0x3L<<2) +#define BNX2_EMAC_MODE_PORT_NONE (0L<<2) +#define BNX2_EMAC_MODE_PORT_MII (1L<<2) +#define BNX2_EMAC_MODE_PORT_GMII (2L<<2) +#define BNX2_EMAC_MODE_PORT_UNDEF (3L<<2) +#define BNX2_EMAC_MODE_MAC_LOOP (1L<<4) +#define BNX2_EMAC_MODE_TAGGED_MAC_CTL (1L<<7) +#define BNX2_EMAC_MODE_TX_BURST (1L<<8) +#define BNX2_EMAC_MODE_MAX_DEFER_DROP_ENA (1L<<9) +#define BNX2_EMAC_MODE_EXT_LINK_POL (1L<<10) +#define BNX2_EMAC_MODE_FORCE_LINK (1L<<11) +#define BNX2_EMAC_MODE_MPKT (1L<<18) +#define BNX2_EMAC_MODE_MPKT_RCVD (1L<<19) +#define BNX2_EMAC_MODE_ACPI_RCVD (1L<<20) + +#define BNX2_EMAC_STATUS 0x00001404 +#define BNX2_EMAC_STATUS_LINK (1L<<11) +#define BNX2_EMAC_STATUS_LINK_CHANGE (1L<<12) +#define BNX2_EMAC_STATUS_MI_COMPLETE (1L<<22) +#define BNX2_EMAC_STATUS_MI_INT (1L<<23) +#define BNX2_EMAC_STATUS_AP_ERROR (1L<<24) +#define BNX2_EMAC_STATUS_PARITY_ERROR_STATE (1L<<31) + +#define BNX2_EMAC_ATTENTION_ENA 0x00001408 +#define BNX2_EMAC_ATTENTION_ENA_LINK (1L<<11) +#define BNX2_EMAC_ATTENTION_ENA_MI_COMPLETE (1L<<22) +#define BNX2_EMAC_ATTENTION_ENA_MI_INT (1L<<23) +#define BNX2_EMAC_ATTENTION_ENA_AP_ERROR (1L<<24) + +#define BNX2_EMAC_LED 0x0000140c +#define BNX2_EMAC_LED_OVERRIDE (1L<<0) +#define BNX2_EMAC_LED_1000MB_OVERRIDE (1L<<1) +#define BNX2_EMAC_LED_100MB_OVERRIDE (1L<<2) +#define BNX2_EMAC_LED_10MB_OVERRIDE (1L<<3) +#define BNX2_EMAC_LED_TRAFFIC_OVERRIDE (1L<<4) +#define BNX2_EMAC_LED_BLNK_TRAFFIC (1L<<5) +#define BNX2_EMAC_LED_TRAFFIC (1L<<6) +#define BNX2_EMAC_LED_1000MB (1L<<7) +#define BNX2_EMAC_LED_100MB (1L<<8) +#define BNX2_EMAC_LED_10MB (1L<<9) +#define BNX2_EMAC_LED_TRAFFIC_STAT (1L<<10) +#define BNX2_EMAC_LED_BLNK_RATE (0xfffL<<19) +#define BNX2_EMAC_LED_BLNK_RATE_ENA (1L<<31) + +#define BNX2_EMAC_MAC_MATCH0 0x00001410 +#define BNX2_EMAC_MAC_MATCH1 0x00001414 +#define BNX2_EMAC_MAC_MATCH2 0x00001418 +#define BNX2_EMAC_MAC_MATCH3 0x0000141c +#define BNX2_EMAC_MAC_MATCH4 0x00001420 +#define BNX2_EMAC_MAC_MATCH5 0x00001424 +#define BNX2_EMAC_MAC_MATCH6 0x00001428 +#define BNX2_EMAC_MAC_MATCH7 0x0000142c +#define BNX2_EMAC_MAC_MATCH8 0x00001430 +#define BNX2_EMAC_MAC_MATCH9 0x00001434 +#define BNX2_EMAC_MAC_MATCH10 0x00001438 +#define BNX2_EMAC_MAC_MATCH11 0x0000143c +#define BNX2_EMAC_MAC_MATCH12 0x00001440 +#define BNX2_EMAC_MAC_MATCH13 0x00001444 +#define BNX2_EMAC_MAC_MATCH14 0x00001448 +#define BNX2_EMAC_MAC_MATCH15 0x0000144c +#define BNX2_EMAC_MAC_MATCH16 0x00001450 +#define BNX2_EMAC_MAC_MATCH17 0x00001454 +#define BNX2_EMAC_MAC_MATCH18 0x00001458 +#define BNX2_EMAC_MAC_MATCH19 0x0000145c +#define BNX2_EMAC_MAC_MATCH20 0x00001460 +#define BNX2_EMAC_MAC_MATCH21 0x00001464 +#define BNX2_EMAC_MAC_MATCH22 0x00001468 +#define BNX2_EMAC_MAC_MATCH23 0x0000146c +#define BNX2_EMAC_MAC_MATCH24 0x00001470 +#define BNX2_EMAC_MAC_MATCH25 0x00001474 +#define BNX2_EMAC_MAC_MATCH26 0x00001478 +#define BNX2_EMAC_MAC_MATCH27 0x0000147c +#define BNX2_EMAC_MAC_MATCH28 0x00001480 +#define BNX2_EMAC_MAC_MATCH29 0x00001484 +#define BNX2_EMAC_MAC_MATCH30 0x00001488 +#define BNX2_EMAC_MAC_MATCH31 0x0000148c +#define BNX2_EMAC_BACKOFF_SEED 0x00001498 +#define BNX2_EMAC_BACKOFF_SEED_EMAC_BACKOFF_SEED (0x3ffL<<0) + +#define BNX2_EMAC_RX_MTU_SIZE 0x0000149c +#define BNX2_EMAC_RX_MTU_SIZE_MTU_SIZE (0xffffL<<0) +#define BNX2_EMAC_RX_MTU_SIZE_JUMBO_ENA (1L<<31) + +#define BNX2_EMAC_SERDES_CNTL 0x000014a4 +#define BNX2_EMAC_SERDES_CNTL_RXR (0x7L<<0) +#define BNX2_EMAC_SERDES_CNTL_RXG (0x3L<<3) +#define BNX2_EMAC_SERDES_CNTL_RXCKSEL (1L<<6) +#define BNX2_EMAC_SERDES_CNTL_TXBIAS (0x7L<<7) +#define BNX2_EMAC_SERDES_CNTL_BGMAX (1L<<10) +#define BNX2_EMAC_SERDES_CNTL_BGMIN (1L<<11) +#define BNX2_EMAC_SERDES_CNTL_TXMODE (1L<<12) +#define BNX2_EMAC_SERDES_CNTL_TXEDGE (1L<<13) +#define BNX2_EMAC_SERDES_CNTL_SERDES_MODE (1L<<14) +#define BNX2_EMAC_SERDES_CNTL_PLLTEST (1L<<15) +#define BNX2_EMAC_SERDES_CNTL_CDET_EN (1L<<16) +#define BNX2_EMAC_SERDES_CNTL_TBI_LBK (1L<<17) +#define BNX2_EMAC_SERDES_CNTL_REMOTE_LBK (1L<<18) +#define BNX2_EMAC_SERDES_CNTL_REV_PHASE (1L<<19) +#define BNX2_EMAC_SERDES_CNTL_REGCTL12 (0x3L<<20) +#define BNX2_EMAC_SERDES_CNTL_REGCTL25 (0x3L<<22) + +#define BNX2_EMAC_SERDES_STATUS 0x000014a8 +#define BNX2_EMAC_SERDES_STATUS_RX_STAT (0xffL<<0) +#define BNX2_EMAC_SERDES_STATUS_COMMA_DET (1L<<8) + +#define BNX2_EMAC_MDIO_COMM 0x000014ac +#define BNX2_EMAC_MDIO_COMM_DATA (0xffffL<<0) +#define BNX2_EMAC_MDIO_COMM_REG_ADDR (0x1fL<<16) +#define BNX2_EMAC_MDIO_COMM_PHY_ADDR (0x1fL<<21) +#define BNX2_EMAC_MDIO_COMM_COMMAND (0x3L<<26) +#define BNX2_EMAC_MDIO_COMM_COMMAND_UNDEFINED_0 (0L<<26) +#define BNX2_EMAC_MDIO_COMM_COMMAND_WRITE (1L<<26) +#define BNX2_EMAC_MDIO_COMM_COMMAND_READ (2L<<26) +#define BNX2_EMAC_MDIO_COMM_COMMAND_UNDEFINED_3 (3L<<26) +#define BNX2_EMAC_MDIO_COMM_FAIL (1L<<28) +#define BNX2_EMAC_MDIO_COMM_START_BUSY (1L<<29) +#define BNX2_EMAC_MDIO_COMM_DISEXT (1L<<30) + +#define BNX2_EMAC_MDIO_STATUS 0x000014b0 +#define BNX2_EMAC_MDIO_STATUS_LINK (1L<<0) +#define BNX2_EMAC_MDIO_STATUS_10MB (1L<<1) + +#define BNX2_EMAC_MDIO_MODE 0x000014b4 +#define BNX2_EMAC_MDIO_MODE_SHORT_PREAMBLE (1L<<1) +#define BNX2_EMAC_MDIO_MODE_AUTO_POLL (1L<<4) +#define BNX2_EMAC_MDIO_MODE_BIT_BANG (1L<<8) +#define BNX2_EMAC_MDIO_MODE_MDIO (1L<<9) +#define BNX2_EMAC_MDIO_MODE_MDIO_OE (1L<<10) +#define BNX2_EMAC_MDIO_MODE_MDC (1L<<11) +#define BNX2_EMAC_MDIO_MODE_MDINT (1L<<12) +#define BNX2_EMAC_MDIO_MODE_CLOCK_CNT (0x1fL<<16) + +#define BNX2_EMAC_MDIO_AUTO_STATUS 0x000014b8 +#define BNX2_EMAC_MDIO_AUTO_STATUS_AUTO_ERR (1L<<0) + +#define BNX2_EMAC_TX_MODE 0x000014bc +#define BNX2_EMAC_TX_MODE_RESET (1L<<0) +#define BNX2_EMAC_TX_MODE_EXT_PAUSE_EN (1L<<3) +#define BNX2_EMAC_TX_MODE_FLOW_EN (1L<<4) +#define BNX2_EMAC_TX_MODE_BIG_BACKOFF (1L<<5) +#define BNX2_EMAC_TX_MODE_LONG_PAUSE (1L<<6) +#define BNX2_EMAC_TX_MODE_LINK_AWARE (1L<<7) + +#define BNX2_EMAC_TX_STATUS 0x000014c0 +#define BNX2_EMAC_TX_STATUS_XOFFED (1L<<0) +#define BNX2_EMAC_TX_STATUS_XOFF_SENT (1L<<1) +#define BNX2_EMAC_TX_STATUS_XON_SENT (1L<<2) +#define BNX2_EMAC_TX_STATUS_LINK_UP (1L<<3) +#define BNX2_EMAC_TX_STATUS_UNDERRUN (1L<<4) + +#define BNX2_EMAC_TX_LENGTHS 0x000014c4 +#define BNX2_EMAC_TX_LENGTHS_SLOT (0xffL<<0) +#define BNX2_EMAC_TX_LENGTHS_IPG (0xfL<<8) +#define BNX2_EMAC_TX_LENGTHS_IPG_CRS (0x3L<<12) + +#define BNX2_EMAC_RX_MODE 0x000014c8 +#define BNX2_EMAC_RX_MODE_RESET (1L<<0) +#define BNX2_EMAC_RX_MODE_FLOW_EN (1L<<2) +#define BNX2_EMAC_RX_MODE_KEEP_MAC_CONTROL (1L<<3) +#define BNX2_EMAC_RX_MODE_KEEP_PAUSE (1L<<4) +#define BNX2_EMAC_RX_MODE_ACCEPT_OVERSIZE (1L<<5) +#define BNX2_EMAC_RX_MODE_ACCEPT_RUNTS (1L<<6) +#define BNX2_EMAC_RX_MODE_LLC_CHK (1L<<7) +#define BNX2_EMAC_RX_MODE_PROMISCUOUS (1L<<8) +#define BNX2_EMAC_RX_MODE_NO_CRC_CHK (1L<<9) +#define BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG (1L<<10) +#define BNX2_EMAC_RX_MODE_FILT_BROADCAST (1L<<11) +#define BNX2_EMAC_RX_MODE_SORT_MODE (1L<<12) + +#define BNX2_EMAC_RX_STATUS 0x000014cc +#define BNX2_EMAC_RX_STATUS_FFED (1L<<0) +#define BNX2_EMAC_RX_STATUS_FF_RECEIVED (1L<<1) +#define BNX2_EMAC_RX_STATUS_N_RECEIVED (1L<<2) + +#define BNX2_EMAC_MULTICAST_HASH0 0x000014d0 +#define BNX2_EMAC_MULTICAST_HASH1 0x000014d4 +#define BNX2_EMAC_MULTICAST_HASH2 0x000014d8 +#define BNX2_EMAC_MULTICAST_HASH3 0x000014dc +#define BNX2_EMAC_MULTICAST_HASH4 0x000014e0 +#define BNX2_EMAC_MULTICAST_HASH5 0x000014e4 +#define BNX2_EMAC_MULTICAST_HASH6 0x000014e8 +#define BNX2_EMAC_MULTICAST_HASH7 0x000014ec +#define BNX2_EMAC_RX_STAT_IFHCINOCTETS 0x00001500 +#define BNX2_EMAC_RX_STAT_IFHCINBADOCTETS 0x00001504 +#define BNX2_EMAC_RX_STAT_ETHERSTATSFRAGMENTS 0x00001508 +#define BNX2_EMAC_RX_STAT_IFHCINUCASTPKTS 0x0000150c +#define BNX2_EMAC_RX_STAT_IFHCINMULTICASTPKTS 0x00001510 +#define BNX2_EMAC_RX_STAT_IFHCINBROADCASTPKTS 0x00001514 +#define BNX2_EMAC_RX_STAT_DOT3STATSFCSERRORS 0x00001518 +#define BNX2_EMAC_RX_STAT_DOT3STATSALIGNMENTERRORS 0x0000151c +#define BNX2_EMAC_RX_STAT_DOT3STATSCARRIERSENSEERRORS 0x00001520 +#define BNX2_EMAC_RX_STAT_XONPAUSEFRAMESRECEIVED 0x00001524 +#define BNX2_EMAC_RX_STAT_XOFFPAUSEFRAMESRECEIVED 0x00001528 +#define BNX2_EMAC_RX_STAT_MACCONTROLFRAMESRECEIVED 0x0000152c +#define BNX2_EMAC_RX_STAT_XOFFSTATEENTERED 0x00001530 +#define BNX2_EMAC_RX_STAT_DOT3STATSFRAMESTOOLONG 0x00001534 +#define BNX2_EMAC_RX_STAT_ETHERSTATSJABBERS 0x00001538 +#define BNX2_EMAC_RX_STAT_ETHERSTATSUNDERSIZEPKTS 0x0000153c +#define BNX2_EMAC_RX_STAT_ETHERSTATSPKTS64OCTETS 0x00001540 +#define BNX2_EMAC_RX_STAT_ETHERSTATSPKTS65OCTETSTO127OCTETS 0x00001544 +#define BNX2_EMAC_RX_STAT_ETHERSTATSPKTS128OCTETSTO255OCTETS 0x00001548 +#define BNX2_EMAC_RX_STAT_ETHERSTATSPKTS256OCTETSTO511OCTETS 0x0000154c +#define BNX2_EMAC_RX_STAT_ETHERSTATSPKTS512OCTETSTO1023OCTETS 0x00001550 +#define BNX2_EMAC_RX_STAT_ETHERSTATSPKTS1024OCTETSTO1522OCTETS 0x00001554 +#define BNX2_EMAC_RX_STAT_ETHERSTATSPKTS1523OCTETSTO9022OCTETS 0x00001558 +#define BNX2_EMAC_RXMAC_DEBUG0 0x0000155c +#define BNX2_EMAC_RXMAC_DEBUG1 0x00001560 +#define BNX2_EMAC_RXMAC_DEBUG1_LENGTH_NE_BYTE_COUNT (1L<<0) +#define BNX2_EMAC_RXMAC_DEBUG1_LENGTH_OUT_RANGE (1L<<1) +#define BNX2_EMAC_RXMAC_DEBUG1_BAD_CRC (1L<<2) +#define BNX2_EMAC_RXMAC_DEBUG1_RX_ERROR (1L<<3) +#define BNX2_EMAC_RXMAC_DEBUG1_ALIGN_ERROR (1L<<4) +#define BNX2_EMAC_RXMAC_DEBUG1_LAST_DATA (1L<<5) +#define BNX2_EMAC_RXMAC_DEBUG1_ODD_BYTE_START (1L<<6) +#define BNX2_EMAC_RXMAC_DEBUG1_BYTE_COUNT (0xffffL<<7) +#define BNX2_EMAC_RXMAC_DEBUG1_SLOT_TIME (0xffL<<23) + +#define BNX2_EMAC_RXMAC_DEBUG2 0x00001564 +#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE (0x7L<<0) +#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE_IDLE (0x0L<<0) +#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE_SFD (0x1L<<0) +#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE_DATA (0x2L<<0) +#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE_SKEEP (0x3L<<0) +#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE_EXT (0x4L<<0) +#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE_DROP (0x5L<<0) +#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE_SDROP (0x6L<<0) +#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE_FC (0x7L<<0) +#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE (0xfL<<3) +#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_IDLE (0x0L<<3) +#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_DATA0 (0x1L<<3) +#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_DATA1 (0x2L<<3) +#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_DATA2 (0x3L<<3) +#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_DATA3 (0x4L<<3) +#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_ABORT (0x5L<<3) +#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_WAIT (0x6L<<3) +#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_STATUS (0x7L<<3) +#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_LAST (0x8L<<3) +#define BNX2_EMAC_RXMAC_DEBUG2_BYTE_IN (0xffL<<7) +#define BNX2_EMAC_RXMAC_DEBUG2_FALSEC (1L<<15) +#define BNX2_EMAC_RXMAC_DEBUG2_TAGGED (1L<<16) +#define BNX2_EMAC_RXMAC_DEBUG2_PAUSE_STATE (1L<<18) +#define BNX2_EMAC_RXMAC_DEBUG2_PAUSE_STATE_IDLE (0L<<18) +#define BNX2_EMAC_RXMAC_DEBUG2_PAUSE_STATE_PAUSED (1L<<18) +#define BNX2_EMAC_RXMAC_DEBUG2_SE_COUNTER (0xfL<<19) +#define BNX2_EMAC_RXMAC_DEBUG2_QUANTA (0x1fL<<23) + +#define BNX2_EMAC_RXMAC_DEBUG3 0x00001568 +#define BNX2_EMAC_RXMAC_DEBUG3_PAUSE_CTR (0xffffL<<0) +#define BNX2_EMAC_RXMAC_DEBUG3_TMP_PAUSE_CTR (0xffffL<<16) + +#define BNX2_EMAC_RXMAC_DEBUG4 0x0000156c +#define BNX2_EMAC_RXMAC_DEBUG4_TYPE_FIELD (0xffffL<<0) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE (0x3fL<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_IDLE (0x0L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_UMAC2 (0x1L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_UMAC3 (0x2L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_UNI (0x3L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MMAC2 (0x7L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MMAC3 (0x5L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_PSA1 (0x6L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_PSA2 (0x7L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_PSA3 (0x8L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MC2 (0x9L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MC3 (0xaL<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MWAIT1 (0xeL<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MWAIT2 (0xfL<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MCHECK (0x10L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MC (0x11L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_BC2 (0x12L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_BC3 (0x13L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_BSA1 (0x14L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_BSA2 (0x15L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_BSA3 (0x16L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_BTYPE (0x17L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_BC (0x18L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_PTYPE (0x19L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_CMD (0x1aL<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MAC (0x1bL<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_LATCH (0x1cL<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_XOFF (0x1dL<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_XON (0x1eL<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_PAUSED (0x1fL<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_NPAUSED (0x20L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_TTYPE (0x21L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_TVAL (0x22L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_USA1 (0x23L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_USA2 (0x24L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_USA3 (0x25L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_UTYPE (0x26L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_UTTYPE (0x27L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_UTVAL (0x28L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MTYPE (0x29L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_DROP (0x2aL<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_DROP_PKT (1L<<22) +#define BNX2_EMAC_RXMAC_DEBUG4_SLOT_FILLED (1L<<23) +#define BNX2_EMAC_RXMAC_DEBUG4_FALSE_CARRIER (1L<<24) +#define BNX2_EMAC_RXMAC_DEBUG4_LAST_DATA (1L<<25) +#define BNX2_EMAC_RXMAC_DEBUG4_sfd_FOUND (1L<<26) +#define BNX2_EMAC_RXMAC_DEBUG4_ADVANCE (1L<<27) +#define BNX2_EMAC_RXMAC_DEBUG4_START (1L<<28) + +#define BNX2_EMAC_RXMAC_DEBUG5 0x00001570 +#define BNX2_EMAC_RXMAC_DEBUG5_PS_IDISM (0x7L<<0) +#define BNX2_EMAC_RXMAC_DEBUG5_PS_IDISM_IDLE (0L<<0) +#define BNX2_EMAC_RXMAC_DEBUG5_PS_IDISM_WAIT_EOF (1L<<0) +#define BNX2_EMAC_RXMAC_DEBUG5_PS_IDISM_WAIT_STAT (2L<<0) +#define BNX2_EMAC_RXMAC_DEBUG5_PS_IDISM_SET_EOF4FCRC (3L<<0) +#define BNX2_EMAC_RXMAC_DEBUG5_PS_IDISM_SET_EOF4RDE (4L<<0) +#define BNX2_EMAC_RXMAC_DEBUG5_PS_IDISM_SET_EOF4ALL (5L<<0) +#define BNX2_EMAC_RXMAC_DEBUG5_PS_IDISM_1WD_WAIT_STAT (6L<<0) +#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF1 (0x7L<<4) +#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF1_VDW (0x0L<<4) +#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF1_STAT (0x1L<<4) +#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF1_AEOF (0x2L<<4) +#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF1_NEOF (0x3L<<4) +#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF1_SOF (0x4L<<4) +#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF1_SAEOF (0x6L<<4) +#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF1_SNEOF (0x7L<<4) +#define BNX2_EMAC_RXMAC_DEBUG5_EOF_DETECTED (1L<<7) +#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF0 (0x7L<<8) +#define BNX2_EMAC_RXMAC_DEBUG5_RPM_IDI_FIFO_FULL (1L<<11) +#define BNX2_EMAC_RXMAC_DEBUG5_LOAD_CCODE (1L<<12) +#define BNX2_EMAC_RXMAC_DEBUG5_LOAD_DATA (1L<<13) +#define BNX2_EMAC_RXMAC_DEBUG5_LOAD_STAT (1L<<14) +#define BNX2_EMAC_RXMAC_DEBUG5_CLR_STAT (1L<<15) +#define BNX2_EMAC_RXMAC_DEBUG5_IDI_RPM_CCODE (0x3L<<16) +#define BNX2_EMAC_RXMAC_DEBUG5_IDI_RPM_ACCEPT (1L<<19) +#define BNX2_EMAC_RXMAC_DEBUG5_FMLEN (0xfffL<<20) + +#define BNX2_EMAC_RX_STAT_AC0 0x00001580 +#define BNX2_EMAC_RX_STAT_AC1 0x00001584 +#define BNX2_EMAC_RX_STAT_AC2 0x00001588 +#define BNX2_EMAC_RX_STAT_AC3 0x0000158c +#define BNX2_EMAC_RX_STAT_AC4 0x00001590 +#define BNX2_EMAC_RX_STAT_AC5 0x00001594 +#define BNX2_EMAC_RX_STAT_AC6 0x00001598 +#define BNX2_EMAC_RX_STAT_AC7 0x0000159c +#define BNX2_EMAC_RX_STAT_AC8 0x000015a0 +#define BNX2_EMAC_RX_STAT_AC9 0x000015a4 +#define BNX2_EMAC_RX_STAT_AC10 0x000015a8 +#define BNX2_EMAC_RX_STAT_AC11 0x000015ac +#define BNX2_EMAC_RX_STAT_AC12 0x000015b0 +#define BNX2_EMAC_RX_STAT_AC13 0x000015b4 +#define BNX2_EMAC_RX_STAT_AC14 0x000015b8 +#define BNX2_EMAC_RX_STAT_AC15 0x000015bc +#define BNX2_EMAC_RX_STAT_AC16 0x000015c0 +#define BNX2_EMAC_RX_STAT_AC17 0x000015c4 +#define BNX2_EMAC_RX_STAT_AC18 0x000015c8 +#define BNX2_EMAC_RX_STAT_AC19 0x000015cc +#define BNX2_EMAC_RX_STAT_AC20 0x000015d0 +#define BNX2_EMAC_RX_STAT_AC21 0x000015d4 +#define BNX2_EMAC_RX_STAT_AC22 0x000015d8 +#define BNX2_EMAC_RXMAC_SUC_DBG_OVERRUNVEC 0x000015dc +#define BNX2_EMAC_TX_STAT_IFHCOUTOCTETS 0x00001600 +#define BNX2_EMAC_TX_STAT_IFHCOUTBADOCTETS 0x00001604 +#define BNX2_EMAC_TX_STAT_ETHERSTATSCOLLISIONS 0x00001608 +#define BNX2_EMAC_TX_STAT_OUTXONSENT 0x0000160c +#define BNX2_EMAC_TX_STAT_OUTXOFFSENT 0x00001610 +#define BNX2_EMAC_TX_STAT_FLOWCONTROLDONE 0x00001614 +#define BNX2_EMAC_TX_STAT_DOT3STATSSINGLECOLLISIONFRAMES 0x00001618 +#define BNX2_EMAC_TX_STAT_DOT3STATSMULTIPLECOLLISIONFRAMES 0x0000161c +#define BNX2_EMAC_TX_STAT_DOT3STATSDEFERREDTRANSMISSIONS 0x00001620 +#define BNX2_EMAC_TX_STAT_DOT3STATSEXCESSIVECOLLISIONS 0x00001624 +#define BNX2_EMAC_TX_STAT_DOT3STATSLATECOLLISIONS 0x00001628 +#define BNX2_EMAC_TX_STAT_IFHCOUTUCASTPKTS 0x0000162c +#define BNX2_EMAC_TX_STAT_IFHCOUTMULTICASTPKTS 0x00001630 +#define BNX2_EMAC_TX_STAT_IFHCOUTBROADCASTPKTS 0x00001634 +#define BNX2_EMAC_TX_STAT_ETHERSTATSPKTS64OCTETS 0x00001638 +#define BNX2_EMAC_TX_STAT_ETHERSTATSPKTS65OCTETSTO127OCTETS 0x0000163c +#define BNX2_EMAC_TX_STAT_ETHERSTATSPKTS128OCTETSTO255OCTETS 0x00001640 +#define BNX2_EMAC_TX_STAT_ETHERSTATSPKTS256OCTETSTO511OCTETS 0x00001644 +#define BNX2_EMAC_TX_STAT_ETHERSTATSPKTS512OCTETSTO1023OCTETS 0x00001648 +#define BNX2_EMAC_TX_STAT_ETHERSTATSPKTS1024OCTETSTO1522OCTETS 0x0000164c +#define BNX2_EMAC_TX_STAT_ETHERSTATSPKTS1523OCTETSTO9022OCTETS 0x00001650 +#define BNX2_EMAC_TX_STAT_DOT3STATSINTERNALMACTRANSMITERRORS 0x00001654 +#define BNX2_EMAC_TXMAC_DEBUG0 0x00001658 +#define BNX2_EMAC_TXMAC_DEBUG1 0x0000165c +#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE (0xfL<<0) +#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE_IDLE (0x0L<<0) +#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE_START0 (0x1L<<0) +#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE_DATA0 (0x4L<<0) +#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE_DATA1 (0x5L<<0) +#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE_DATA2 (0x6L<<0) +#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE_DATA3 (0x7L<<0) +#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE_WAIT0 (0x8L<<0) +#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE_WAIT1 (0x9L<<0) +#define BNX2_EMAC_TXMAC_DEBUG1_CRS_ENABLE (1L<<4) +#define BNX2_EMAC_TXMAC_DEBUG1_BAD_CRC (1L<<5) +#define BNX2_EMAC_TXMAC_DEBUG1_SE_COUNTER (0xfL<<6) +#define BNX2_EMAC_TXMAC_DEBUG1_SEND_PAUSE (1L<<10) +#define BNX2_EMAC_TXMAC_DEBUG1_LATE_COLLISION (1L<<11) +#define BNX2_EMAC_TXMAC_DEBUG1_MAX_DEFER (1L<<12) +#define BNX2_EMAC_TXMAC_DEBUG1_DEFERRED (1L<<13) +#define BNX2_EMAC_TXMAC_DEBUG1_ONE_BYTE (1L<<14) +#define BNX2_EMAC_TXMAC_DEBUG1_IPG_TIME (0xfL<<15) +#define BNX2_EMAC_TXMAC_DEBUG1_SLOT_TIME (0xffL<<19) + +#define BNX2_EMAC_TXMAC_DEBUG2 0x00001660 +#define BNX2_EMAC_TXMAC_DEBUG2_BACK_OFF (0x3ffL<<0) +#define BNX2_EMAC_TXMAC_DEBUG2_BYTE_COUNT (0xffffL<<10) +#define BNX2_EMAC_TXMAC_DEBUG2_COL_COUNT (0x1fL<<26) +#define BNX2_EMAC_TXMAC_DEBUG2_COL_BIT (1L<<31) + +#define BNX2_EMAC_TXMAC_DEBUG3 0x00001664 +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE (0xfL<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_IDLE (0x0L<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_PRE1 (0x1L<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_PRE2 (0x2L<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_SFD (0x3L<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_DATA (0x4L<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_CRC1 (0x5L<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_CRC2 (0x6L<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_EXT (0x7L<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_STATB (0x8L<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_STATG (0x9L<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_JAM (0xaL<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_EJAM (0xbL<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_BJAM (0xcL<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_SWAIT (0xdL<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_BACKOFF (0xeL<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_FILT_STATE (0x7L<<4) +#define BNX2_EMAC_TXMAC_DEBUG3_FILT_STATE_IDLE (0x0L<<4) +#define BNX2_EMAC_TXMAC_DEBUG3_FILT_STATE_WAIT (0x1L<<4) +#define BNX2_EMAC_TXMAC_DEBUG3_FILT_STATE_UNI (0x2L<<4) +#define BNX2_EMAC_TXMAC_DEBUG3_FILT_STATE_MC (0x3L<<4) +#define BNX2_EMAC_TXMAC_DEBUG3_FILT_STATE_BC2 (0x4L<<4) +#define BNX2_EMAC_TXMAC_DEBUG3_FILT_STATE_BC3 (0x5L<<4) +#define BNX2_EMAC_TXMAC_DEBUG3_FILT_STATE_BC (0x6L<<4) +#define BNX2_EMAC_TXMAC_DEBUG3_CRS_DONE (1L<<7) +#define BNX2_EMAC_TXMAC_DEBUG3_XOFF (1L<<8) +#define BNX2_EMAC_TXMAC_DEBUG3_SE_COUNTER (0xfL<<9) +#define BNX2_EMAC_TXMAC_DEBUG3_QUANTA_COUNTER (0x1fL<<13) + +#define BNX2_EMAC_TXMAC_DEBUG4 0x00001668 +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_COUNTER (0xffffL<<0) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE (0xfL<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_IDLE (0x0L<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_MCA1 (0x2L<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_MCA2 (0x3L<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_MCA3 (0x6L<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_SRC1 (0x7L<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_SRC2 (0x5L<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_SRC3 (0x4L<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_TYPE (0xcL<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_CMD (0xeL<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_TIME (0xaL<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_CRC1 (0x8L<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_CRC2 (0x9L<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_WAIT (0xdL<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_STATS0_VALID (1L<<20) +#define BNX2_EMAC_TXMAC_DEBUG4_APPEND_CRC (1L<<21) +#define BNX2_EMAC_TXMAC_DEBUG4_SLOT_FILLED (1L<<22) +#define BNX2_EMAC_TXMAC_DEBUG4_MAX_DEFER (1L<<23) +#define BNX2_EMAC_TXMAC_DEBUG4_SEND_EXTEND (1L<<24) +#define BNX2_EMAC_TXMAC_DEBUG4_SEND_PADDING (1L<<25) +#define BNX2_EMAC_TXMAC_DEBUG4_EOF_LOC (1L<<26) +#define BNX2_EMAC_TXMAC_DEBUG4_COLLIDING (1L<<27) +#define BNX2_EMAC_TXMAC_DEBUG4_COL_IN (1L<<28) +#define BNX2_EMAC_TXMAC_DEBUG4_BURSTING (1L<<29) +#define BNX2_EMAC_TXMAC_DEBUG4_ADVANCE (1L<<30) +#define BNX2_EMAC_TXMAC_DEBUG4_GO (1L<<31) + +#define BNX2_EMAC_TX_STAT_AC0 0x00001680 +#define BNX2_EMAC_TX_STAT_AC1 0x00001684 +#define BNX2_EMAC_TX_STAT_AC2 0x00001688 +#define BNX2_EMAC_TX_STAT_AC3 0x0000168c +#define BNX2_EMAC_TX_STAT_AC4 0x00001690 +#define BNX2_EMAC_TX_STAT_AC5 0x00001694 +#define BNX2_EMAC_TX_STAT_AC6 0x00001698 +#define BNX2_EMAC_TX_STAT_AC7 0x0000169c +#define BNX2_EMAC_TX_STAT_AC8 0x000016a0 +#define BNX2_EMAC_TX_STAT_AC9 0x000016a4 +#define BNX2_EMAC_TX_STAT_AC10 0x000016a8 +#define BNX2_EMAC_TX_STAT_AC11 0x000016ac +#define BNX2_EMAC_TX_STAT_AC12 0x000016b0 +#define BNX2_EMAC_TX_STAT_AC13 0x000016b4 +#define BNX2_EMAC_TX_STAT_AC14 0x000016b8 +#define BNX2_EMAC_TX_STAT_AC15 0x000016bc +#define BNX2_EMAC_TX_STAT_AC16 0x000016c0 +#define BNX2_EMAC_TX_STAT_AC17 0x000016c4 +#define BNX2_EMAC_TX_STAT_AC18 0x000016c8 +#define BNX2_EMAC_TX_STAT_AC19 0x000016cc +#define BNX2_EMAC_TX_STAT_AC20 0x000016d0 +#define BNX2_EMAC_TX_STAT_AC21 0x000016d4 +#define BNX2_EMAC_TXMAC_SUC_DBG_OVERRUNVEC 0x000016d8 + + +/* + * rpm_reg definition + * offset: 0x1800 + */ +#define BNX2_RPM_COMMAND 0x00001800 +#define BNX2_RPM_COMMAND_ENABLED (1L<<0) +#define BNX2_RPM_COMMAND_OVERRUN_ABORT (1L<<4) + +#define BNX2_RPM_STATUS 0x00001804 +#define BNX2_RPM_STATUS_MBUF_WAIT (1L<<0) +#define BNX2_RPM_STATUS_FREE_WAIT (1L<<1) + +#define BNX2_RPM_CONFIG 0x00001808 +#define BNX2_RPM_CONFIG_NO_PSD_HDR_CKSUM (1L<<0) +#define BNX2_RPM_CONFIG_ACPI_ENA (1L<<1) +#define BNX2_RPM_CONFIG_ACPI_KEEP (1L<<2) +#define BNX2_RPM_CONFIG_MP_KEEP (1L<<3) +#define BNX2_RPM_CONFIG_SORT_VECT_VAL (0xfL<<4) +#define BNX2_RPM_CONFIG_IGNORE_VLAN (1L<<31) + +#define BNX2_RPM_VLAN_MATCH0 0x00001810 +#define BNX2_RPM_VLAN_MATCH0_RPM_VLAN_MTCH0_VALUE (0xfffL<<0) + +#define BNX2_RPM_VLAN_MATCH1 0x00001814 +#define BNX2_RPM_VLAN_MATCH1_RPM_VLAN_MTCH1_VALUE (0xfffL<<0) + +#define BNX2_RPM_VLAN_MATCH2 0x00001818 +#define BNX2_RPM_VLAN_MATCH2_RPM_VLAN_MTCH2_VALUE (0xfffL<<0) + +#define BNX2_RPM_VLAN_MATCH3 0x0000181c +#define BNX2_RPM_VLAN_MATCH3_RPM_VLAN_MTCH3_VALUE (0xfffL<<0) + +#define BNX2_RPM_SORT_USER0 0x00001820 +#define BNX2_RPM_SORT_USER0_PM_EN (0xffffL<<0) +#define BNX2_RPM_SORT_USER0_BC_EN (1L<<16) +#define BNX2_RPM_SORT_USER0_MC_EN (1L<<17) +#define BNX2_RPM_SORT_USER0_MC_HSH_EN (1L<<18) +#define BNX2_RPM_SORT_USER0_PROM_EN (1L<<19) +#define BNX2_RPM_SORT_USER0_VLAN_EN (0xfL<<20) +#define BNX2_RPM_SORT_USER0_PROM_VLAN (1L<<24) +#define BNX2_RPM_SORT_USER0_ENA (1L<<31) + +#define BNX2_RPM_SORT_USER1 0x00001824 +#define BNX2_RPM_SORT_USER1_PM_EN (0xffffL<<0) +#define BNX2_RPM_SORT_USER1_BC_EN (1L<<16) +#define BNX2_RPM_SORT_USER1_MC_EN (1L<<17) +#define BNX2_RPM_SORT_USER1_MC_HSH_EN (1L<<18) +#define BNX2_RPM_SORT_USER1_PROM_EN (1L<<19) +#define BNX2_RPM_SORT_USER1_VLAN_EN (0xfL<<20) +#define BNX2_RPM_SORT_USER1_PROM_VLAN (1L<<24) +#define BNX2_RPM_SORT_USER1_ENA (1L<<31) + +#define BNX2_RPM_SORT_USER2 0x00001828 +#define BNX2_RPM_SORT_USER2_PM_EN (0xffffL<<0) +#define BNX2_RPM_SORT_USER2_BC_EN (1L<<16) +#define BNX2_RPM_SORT_USER2_MC_EN (1L<<17) +#define BNX2_RPM_SORT_USER2_MC_HSH_EN (1L<<18) +#define BNX2_RPM_SORT_USER2_PROM_EN (1L<<19) +#define BNX2_RPM_SORT_USER2_VLAN_EN (0xfL<<20) +#define BNX2_RPM_SORT_USER2_PROM_VLAN (1L<<24) +#define BNX2_RPM_SORT_USER2_ENA (1L<<31) + +#define BNX2_RPM_SORT_USER3 0x0000182c +#define BNX2_RPM_SORT_USER3_PM_EN (0xffffL<<0) +#define BNX2_RPM_SORT_USER3_BC_EN (1L<<16) +#define BNX2_RPM_SORT_USER3_MC_EN (1L<<17) +#define BNX2_RPM_SORT_USER3_MC_HSH_EN (1L<<18) +#define BNX2_RPM_SORT_USER3_PROM_EN (1L<<19) +#define BNX2_RPM_SORT_USER3_VLAN_EN (0xfL<<20) +#define BNX2_RPM_SORT_USER3_PROM_VLAN (1L<<24) +#define BNX2_RPM_SORT_USER3_ENA (1L<<31) + +#define BNX2_RPM_STAT_L2_FILTER_DISCARDS 0x00001840 +#define BNX2_RPM_STAT_RULE_CHECKER_DISCARDS 0x00001844 +#define BNX2_RPM_STAT_IFINFTQDISCARDS 0x00001848 +#define BNX2_RPM_STAT_IFINMBUFDISCARD 0x0000184c +#define BNX2_RPM_STAT_RULE_CHECKER_P4_HIT 0x00001850 +#define BNX2_RPM_STAT_AC0 0x00001880 +#define BNX2_RPM_STAT_AC1 0x00001884 +#define BNX2_RPM_STAT_AC2 0x00001888 +#define BNX2_RPM_STAT_AC3 0x0000188c +#define BNX2_RPM_STAT_AC4 0x00001890 +#define BNX2_RPM_RC_CNTL_0 0x00001900 +#define BNX2_RPM_RC_CNTL_0_OFFSET (0xffL<<0) +#define BNX2_RPM_RC_CNTL_0_CLASS (0x7L<<8) +#define BNX2_RPM_RC_CNTL_0_PRIORITY (1L<<11) +#define BNX2_RPM_RC_CNTL_0_P4 (1L<<12) +#define BNX2_RPM_RC_CNTL_0_HDR_TYPE (0x7L<<13) +#define BNX2_RPM_RC_CNTL_0_HDR_TYPE_START (0L<<13) +#define BNX2_RPM_RC_CNTL_0_HDR_TYPE_IP (1L<<13) +#define BNX2_RPM_RC_CNTL_0_HDR_TYPE_TCP (2L<<13) +#define BNX2_RPM_RC_CNTL_0_HDR_TYPE_UDP (3L<<13) +#define BNX2_RPM_RC_CNTL_0_HDR_TYPE_DATA (4L<<13) +#define BNX2_RPM_RC_CNTL_0_COMP (0x3L<<16) +#define BNX2_RPM_RC_CNTL_0_COMP_EQUAL (0L<<16) +#define BNX2_RPM_RC_CNTL_0_COMP_NEQUAL (1L<<16) +#define BNX2_RPM_RC_CNTL_0_COMP_GREATER (2L<<16) +#define BNX2_RPM_RC_CNTL_0_COMP_LESS (3L<<16) +#define BNX2_RPM_RC_CNTL_0_SBIT (1L<<19) +#define BNX2_RPM_RC_CNTL_0_CMDSEL (0xfL<<20) +#define BNX2_RPM_RC_CNTL_0_MAP (1L<<24) +#define BNX2_RPM_RC_CNTL_0_DISCARD (1L<<25) +#define BNX2_RPM_RC_CNTL_0_MASK (1L<<26) +#define BNX2_RPM_RC_CNTL_0_P1 (1L<<27) +#define BNX2_RPM_RC_CNTL_0_P2 (1L<<28) +#define BNX2_RPM_RC_CNTL_0_P3 (1L<<29) +#define BNX2_RPM_RC_CNTL_0_NBIT (1L<<30) + +#define BNX2_RPM_RC_VALUE_MASK_0 0x00001904 +#define BNX2_RPM_RC_VALUE_MASK_0_VALUE (0xffffL<<0) +#define BNX2_RPM_RC_VALUE_MASK_0_MASK (0xffffL<<16) + +#define BNX2_RPM_RC_CNTL_1 0x00001908 +#define BNX2_RPM_RC_CNTL_1_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_1_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_1 0x0000190c +#define BNX2_RPM_RC_CNTL_2 0x00001910 +#define BNX2_RPM_RC_CNTL_2_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_2_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_2 0x00001914 +#define BNX2_RPM_RC_CNTL_3 0x00001918 +#define BNX2_RPM_RC_CNTL_3_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_3_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_3 0x0000191c +#define BNX2_RPM_RC_CNTL_4 0x00001920 +#define BNX2_RPM_RC_CNTL_4_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_4_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_4 0x00001924 +#define BNX2_RPM_RC_CNTL_5 0x00001928 +#define BNX2_RPM_RC_CNTL_5_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_5_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_5 0x0000192c +#define BNX2_RPM_RC_CNTL_6 0x00001930 +#define BNX2_RPM_RC_CNTL_6_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_6_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_6 0x00001934 +#define BNX2_RPM_RC_CNTL_7 0x00001938 +#define BNX2_RPM_RC_CNTL_7_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_7_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_7 0x0000193c +#define BNX2_RPM_RC_CNTL_8 0x00001940 +#define BNX2_RPM_RC_CNTL_8_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_8_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_8 0x00001944 +#define BNX2_RPM_RC_CNTL_9 0x00001948 +#define BNX2_RPM_RC_CNTL_9_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_9_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_9 0x0000194c +#define BNX2_RPM_RC_CNTL_10 0x00001950 +#define BNX2_RPM_RC_CNTL_10_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_10_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_10 0x00001954 +#define BNX2_RPM_RC_CNTL_11 0x00001958 +#define BNX2_RPM_RC_CNTL_11_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_11_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_11 0x0000195c +#define BNX2_RPM_RC_CNTL_12 0x00001960 +#define BNX2_RPM_RC_CNTL_12_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_12_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_12 0x00001964 +#define BNX2_RPM_RC_CNTL_13 0x00001968 +#define BNX2_RPM_RC_CNTL_13_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_13_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_13 0x0000196c +#define BNX2_RPM_RC_CNTL_14 0x00001970 +#define BNX2_RPM_RC_CNTL_14_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_14_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_14 0x00001974 +#define BNX2_RPM_RC_CNTL_15 0x00001978 +#define BNX2_RPM_RC_CNTL_15_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_15_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_15 0x0000197c +#define BNX2_RPM_RC_CONFIG 0x00001980 +#define BNX2_RPM_RC_CONFIG_RULE_ENABLE (0xffffL<<0) +#define BNX2_RPM_RC_CONFIG_DEF_CLASS (0x7L<<24) + +#define BNX2_RPM_DEBUG0 0x00001984 +#define BNX2_RPM_DEBUG0_FM_BCNT (0xffffL<<0) +#define BNX2_RPM_DEBUG0_T_DATA_OFST_VLD (1L<<16) +#define BNX2_RPM_DEBUG0_T_UDP_OFST_VLD (1L<<17) +#define BNX2_RPM_DEBUG0_T_TCP_OFST_VLD (1L<<18) +#define BNX2_RPM_DEBUG0_T_IP_OFST_VLD (1L<<19) +#define BNX2_RPM_DEBUG0_IP_MORE_FRGMT (1L<<20) +#define BNX2_RPM_DEBUG0_T_IP_NO_TCP_UDP_HDR (1L<<21) +#define BNX2_RPM_DEBUG0_LLC_SNAP (1L<<22) +#define BNX2_RPM_DEBUG0_FM_STARTED (1L<<23) +#define BNX2_RPM_DEBUG0_DONE (1L<<24) +#define BNX2_RPM_DEBUG0_WAIT_4_DONE (1L<<25) +#define BNX2_RPM_DEBUG0_USE_TPBUF_CKSUM (1L<<26) +#define BNX2_RPM_DEBUG0_RX_NO_PSD_HDR_CKSUM (1L<<27) +#define BNX2_RPM_DEBUG0_IGNORE_VLAN (1L<<28) +#define BNX2_RPM_DEBUG0_RP_ENA_ACTIVE (1L<<31) + +#define BNX2_RPM_DEBUG1 0x00001988 +#define BNX2_RPM_DEBUG1_FSM_CUR_ST (0xffffL<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_IDLE (0L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_ETYPE_B6_ALL (1L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_ETYPE_B2_IPLLC (2L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_ETYPE_B6_IP (4L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_ETYPE_B2_IP (8L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_IP_START (16L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_IP (32L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_TCP (64L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_UDP (128L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_AH (256L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_ESP (512L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_ESP_PAYLOAD (1024L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_DATA (2048L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_ADD_CARRY (0x2000L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_ADD_CARRYOUT (0x4000L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_LATCH_RESULT (0x8000L<<0) +#define BNX2_RPM_DEBUG1_HDR_BCNT (0x7ffL<<16) +#define BNX2_RPM_DEBUG1_UNKNOWN_ETYPE_D (1L<<28) +#define BNX2_RPM_DEBUG1_VLAN_REMOVED_D2 (1L<<29) +#define BNX2_RPM_DEBUG1_VLAN_REMOVED_D1 (1L<<30) +#define BNX2_RPM_DEBUG1_EOF_0XTRA_WD (1L<<31) + +#define BNX2_RPM_DEBUG2 0x0000198c +#define BNX2_RPM_DEBUG2_CMD_HIT_VEC (0xffffL<<0) +#define BNX2_RPM_DEBUG2_IP_BCNT (0xffL<<16) +#define BNX2_RPM_DEBUG2_THIS_CMD_M4 (1L<<24) +#define BNX2_RPM_DEBUG2_THIS_CMD_M3 (1L<<25) +#define BNX2_RPM_DEBUG2_THIS_CMD_M2 (1L<<26) +#define BNX2_RPM_DEBUG2_THIS_CMD_M1 (1L<<27) +#define BNX2_RPM_DEBUG2_IPIPE_EMPTY (1L<<28) +#define BNX2_RPM_DEBUG2_FM_DISCARD (1L<<29) +#define BNX2_RPM_DEBUG2_LAST_RULE_IN_FM_D2 (1L<<30) +#define BNX2_RPM_DEBUG2_LAST_RULE_IN_FM_D1 (1L<<31) + +#define BNX2_RPM_DEBUG3 0x00001990 +#define BNX2_RPM_DEBUG3_AVAIL_MBUF_PTR (0x1ffL<<0) +#define BNX2_RPM_DEBUG3_RDE_RLUPQ_WR_REQ_INT (1L<<9) +#define BNX2_RPM_DEBUG3_RDE_RBUF_WR_LAST_INT (1L<<10) +#define BNX2_RPM_DEBUG3_RDE_RBUF_WR_REQ_INT (1L<<11) +#define BNX2_RPM_DEBUG3_RDE_RBUF_FREE_REQ (1L<<12) +#define BNX2_RPM_DEBUG3_RDE_RBUF_ALLOC_REQ (1L<<13) +#define BNX2_RPM_DEBUG3_DFSM_MBUF_NOTAVAIL (1L<<14) +#define BNX2_RPM_DEBUG3_RBUF_RDE_SOF_DROP (1L<<15) +#define BNX2_RPM_DEBUG3_DFIFO_VLD_ENTRY_CT (0xfL<<16) +#define BNX2_RPM_DEBUG3_RDE_SRC_FIFO_ALMFULL (1L<<21) +#define BNX2_RPM_DEBUG3_DROP_NXT_VLD (1L<<22) +#define BNX2_RPM_DEBUG3_DROP_NXT (1L<<23) +#define BNX2_RPM_DEBUG3_FTQ_FSM (0x3L<<24) +#define BNX2_RPM_DEBUG3_FTQ_FSM_IDLE (0x0L<<24) +#define BNX2_RPM_DEBUG3_FTQ_FSM_WAIT_ACK (0x1L<<24) +#define BNX2_RPM_DEBUG3_FTQ_FSM_WAIT_FREE (0x2L<<24) +#define BNX2_RPM_DEBUG3_MBWRITE_FSM (0x3L<<26) +#define BNX2_RPM_DEBUG3_MBWRITE_FSM_WAIT_SOF (0x0L<<26) +#define BNX2_RPM_DEBUG3_MBWRITE_FSM_GET_MBUF (0x1L<<26) +#define BNX2_RPM_DEBUG3_MBWRITE_FSM_DMA_DATA (0x2L<<26) +#define BNX2_RPM_DEBUG3_MBWRITE_FSM_WAIT_DATA (0x3L<<26) +#define BNX2_RPM_DEBUG3_MBWRITE_FSM_WAIT_EOF (0x4L<<26) +#define BNX2_RPM_DEBUG3_MBWRITE_FSM_WAIT_MF_ACK (0x5L<<26) +#define BNX2_RPM_DEBUG3_MBWRITE_FSM_WAIT_DROP_NXT_VLD (0x6L<<26) +#define BNX2_RPM_DEBUG3_MBWRITE_FSM_DONE (0x7L<<26) +#define BNX2_RPM_DEBUG3_MBFREE_FSM (1L<<29) +#define BNX2_RPM_DEBUG3_MBFREE_FSM_IDLE (0L<<29) +#define BNX2_RPM_DEBUG3_MBFREE_FSM_WAIT_ACK (1L<<29) +#define BNX2_RPM_DEBUG3_MBALLOC_FSM (1L<<30) +#define BNX2_RPM_DEBUG3_MBALLOC_FSM_ET_MBUF (0x0L<<30) +#define BNX2_RPM_DEBUG3_MBALLOC_FSM_IVE_MBUF (0x1L<<30) +#define BNX2_RPM_DEBUG3_CCODE_EOF_ERROR (1L<<31) + +#define BNX2_RPM_DEBUG4 0x00001994 +#define BNX2_RPM_DEBUG4_DFSM_MBUF_CLUSTER (0x1ffffffL<<0) +#define BNX2_RPM_DEBUG4_DFIFO_CUR_CCODE (0x7L<<25) +#define BNX2_RPM_DEBUG4_MBWRITE_FSM (0x7L<<28) +#define BNX2_RPM_DEBUG4_DFIFO_EMPTY (1L<<31) + +#define BNX2_RPM_DEBUG5 0x00001998 +#define BNX2_RPM_DEBUG5_RDROP_WPTR (0x1fL<<0) +#define BNX2_RPM_DEBUG5_RDROP_ACPI_RPTR (0x1fL<<5) +#define BNX2_RPM_DEBUG5_RDROP_MC_RPTR (0x1fL<<10) +#define BNX2_RPM_DEBUG5_RDROP_RC_RPTR (0x1fL<<15) +#define BNX2_RPM_DEBUG5_RDROP_ACPI_EMPTY (1L<<20) +#define BNX2_RPM_DEBUG5_RDROP_MC_EMPTY (1L<<21) +#define BNX2_RPM_DEBUG5_RDROP_AEOF_VEC_AT_RDROP_MC_RPTR (1L<<22) +#define BNX2_RPM_DEBUG5_HOLDREG_WOL_DROP_INT (1L<<23) +#define BNX2_RPM_DEBUG5_HOLDREG_DISCARD (1L<<24) +#define BNX2_RPM_DEBUG5_HOLDREG_MBUF_NOTAVAIL (1L<<25) +#define BNX2_RPM_DEBUG5_HOLDREG_MC_EMPTY (1L<<26) +#define BNX2_RPM_DEBUG5_HOLDREG_RC_EMPTY (1L<<27) +#define BNX2_RPM_DEBUG5_HOLDREG_FC_EMPTY (1L<<28) +#define BNX2_RPM_DEBUG5_HOLDREG_ACPI_EMPTY (1L<<29) +#define BNX2_RPM_DEBUG5_HOLDREG_FULL_T (1L<<30) +#define BNX2_RPM_DEBUG5_HOLDREG_RD (1L<<31) + +#define BNX2_RPM_DEBUG6 0x0000199c +#define BNX2_RPM_DEBUG6_ACPI_VEC (0xffffL<<0) +#define BNX2_RPM_DEBUG6_VEC (0xffffL<<16) + +#define BNX2_RPM_DEBUG7 0x000019a0 +#define BNX2_RPM_DEBUG7_RPM_DBG7_LAST_CRC (0xffffffffL<<0) + +#define BNX2_RPM_DEBUG8 0x000019a4 +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM (0xfL<<0) +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_IDLE (0L<<0) +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_SOF_W1_ADDR (1L<<0) +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_SOF_W2_ADDR (2L<<0) +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_SOF_W3_ADDR (3L<<0) +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_SOF_WAIT_THBUF (4L<<0) +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_W3_DATA (5L<<0) +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_W0_ADDR (6L<<0) +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_W1_ADDR (7L<<0) +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_W2_ADDR (8L<<0) +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_W3_ADDR (9L<<0) +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_WAIT_THBUF (10L<<0) +#define BNX2_RPM_DEBUG8_COMPARE_AT_W0 (1L<<4) +#define BNX2_RPM_DEBUG8_COMPARE_AT_W3_DATA (1L<<5) +#define BNX2_RPM_DEBUG8_COMPARE_AT_SOF_WAIT (1L<<6) +#define BNX2_RPM_DEBUG8_COMPARE_AT_SOF_W3 (1L<<7) +#define BNX2_RPM_DEBUG8_COMPARE_AT_SOF_W2 (1L<<8) +#define BNX2_RPM_DEBUG8_EOF_W_LTEQ6_VLDBYTES (1L<<9) +#define BNX2_RPM_DEBUG8_EOF_W_LTEQ4_VLDBYTES (1L<<10) +#define BNX2_RPM_DEBUG8_NXT_EOF_W_12_VLDBYTES (1L<<11) +#define BNX2_RPM_DEBUG8_EOF_DET (1L<<12) +#define BNX2_RPM_DEBUG8_SOF_DET (1L<<13) +#define BNX2_RPM_DEBUG8_WAIT_4_SOF (1L<<14) +#define BNX2_RPM_DEBUG8_ALL_DONE (1L<<15) +#define BNX2_RPM_DEBUG8_THBUF_ADDR (0x7fL<<16) +#define BNX2_RPM_DEBUG8_BYTE_CTR (0xffL<<24) + +#define BNX2_RPM_DEBUG9 0x000019a8 +#define BNX2_RPM_DEBUG9_OUTFIFO_COUNT (0x7L<<0) +#define BNX2_RPM_DEBUG9_RDE_ACPI_RDY (1L<<3) +#define BNX2_RPM_DEBUG9_VLD_RD_ENTRY_CT (0x7L<<4) +#define BNX2_RPM_DEBUG9_OUTFIFO_OVERRUN_OCCURRED (1L<<28) +#define BNX2_RPM_DEBUG9_INFIFO_OVERRUN_OCCURRED (1L<<29) +#define BNX2_RPM_DEBUG9_ACPI_MATCH_INT (1L<<30) +#define BNX2_RPM_DEBUG9_ACPI_ENABLE_SYN (1L<<31) + +#define BNX2_RPM_ACPI_DBG_BUF_W00 0x000019c0 +#define BNX2_RPM_ACPI_DBG_BUF_W01 0x000019c4 +#define BNX2_RPM_ACPI_DBG_BUF_W02 0x000019c8 +#define BNX2_RPM_ACPI_DBG_BUF_W03 0x000019cc +#define BNX2_RPM_ACPI_DBG_BUF_W10 0x000019d0 +#define BNX2_RPM_ACPI_DBG_BUF_W11 0x000019d4 +#define BNX2_RPM_ACPI_DBG_BUF_W12 0x000019d8 +#define BNX2_RPM_ACPI_DBG_BUF_W13 0x000019dc +#define BNX2_RPM_ACPI_DBG_BUF_W20 0x000019e0 +#define BNX2_RPM_ACPI_DBG_BUF_W21 0x000019e4 +#define BNX2_RPM_ACPI_DBG_BUF_W22 0x000019e8 +#define BNX2_RPM_ACPI_DBG_BUF_W23 0x000019ec +#define BNX2_RPM_ACPI_DBG_BUF_W30 0x000019f0 +#define BNX2_RPM_ACPI_DBG_BUF_W31 0x000019f4 +#define BNX2_RPM_ACPI_DBG_BUF_W32 0x000019f8 +#define BNX2_RPM_ACPI_DBG_BUF_W33 0x000019fc + + +/* + * rbuf_reg definition + * offset: 0x200000 + */ +#define BNX2_RBUF_COMMAND 0x00200000 +#define BNX2_RBUF_COMMAND_ENABLED (1L<<0) +#define BNX2_RBUF_COMMAND_FREE_INIT (1L<<1) +#define BNX2_RBUF_COMMAND_RAM_INIT (1L<<2) +#define BNX2_RBUF_COMMAND_OVER_FREE (1L<<4) +#define BNX2_RBUF_COMMAND_ALLOC_REQ (1L<<5) + +#define BNX2_RBUF_STATUS1 0x00200004 +#define BNX2_RBUF_STATUS1_FREE_COUNT (0x3ffL<<0) + +#define BNX2_RBUF_STATUS2 0x00200008 +#define BNX2_RBUF_STATUS2_FREE_TAIL (0x3ffL<<0) +#define BNX2_RBUF_STATUS2_FREE_HEAD (0x3ffL<<16) + +#define BNX2_RBUF_CONFIG 0x0020000c +#define BNX2_RBUF_CONFIG_XOFF_TRIP (0x3ffL<<0) +#define BNX2_RBUF_CONFIG_XON_TRIP (0x3ffL<<16) + +#define BNX2_RBUF_FW_BUF_ALLOC 0x00200010 +#define BNX2_RBUF_FW_BUF_ALLOC_VALUE (0x1ffL<<7) + +#define BNX2_RBUF_FW_BUF_FREE 0x00200014 +#define BNX2_RBUF_FW_BUF_FREE_COUNT (0x7fL<<0) +#define BNX2_RBUF_FW_BUF_FREE_TAIL (0x1ffL<<7) +#define BNX2_RBUF_FW_BUF_FREE_HEAD (0x1ffL<<16) + +#define BNX2_RBUF_FW_BUF_SEL 0x00200018 +#define BNX2_RBUF_FW_BUF_SEL_COUNT (0x7fL<<0) +#define BNX2_RBUF_FW_BUF_SEL_TAIL (0x1ffL<<7) +#define BNX2_RBUF_FW_BUF_SEL_HEAD (0x1ffL<<16) + +#define BNX2_RBUF_CONFIG2 0x0020001c +#define BNX2_RBUF_CONFIG2_MAC_DROP_TRIP (0x3ffL<<0) +#define BNX2_RBUF_CONFIG2_MAC_KEEP_TRIP (0x3ffL<<16) + +#define BNX2_RBUF_CONFIG3 0x00200020 +#define BNX2_RBUF_CONFIG3_CU_DROP_TRIP (0x3ffL<<0) +#define BNX2_RBUF_CONFIG3_CU_KEEP_TRIP (0x3ffL<<16) + +#define BNX2_RBUF_PKT_DATA 0x00208000 +#define BNX2_RBUF_CLIST_DATA 0x00210000 +#define BNX2_RBUF_BUF_DATA 0x00220000 + + +/* + * rv2p_reg definition + * offset: 0x2800 + */ +#define BNX2_RV2P_COMMAND 0x00002800 +#define BNX2_RV2P_COMMAND_ENABLED (1L<<0) +#define BNX2_RV2P_COMMAND_PROC1_INTRPT (1L<<1) +#define BNX2_RV2P_COMMAND_PROC2_INTRPT (1L<<2) +#define BNX2_RV2P_COMMAND_ABORT0 (1L<<4) +#define BNX2_RV2P_COMMAND_ABORT1 (1L<<5) +#define BNX2_RV2P_COMMAND_ABORT2 (1L<<6) +#define BNX2_RV2P_COMMAND_ABORT3 (1L<<7) +#define BNX2_RV2P_COMMAND_ABORT4 (1L<<8) +#define BNX2_RV2P_COMMAND_ABORT5 (1L<<9) +#define BNX2_RV2P_COMMAND_PROC1_RESET (1L<<16) +#define BNX2_RV2P_COMMAND_PROC2_RESET (1L<<17) +#define BNX2_RV2P_COMMAND_CTXIF_RESET (1L<<18) + +#define BNX2_RV2P_STATUS 0x00002804 +#define BNX2_RV2P_STATUS_ALWAYS_0 (1L<<0) +#define BNX2_RV2P_STATUS_RV2P_GEN_STAT0_CNT (1L<<8) +#define BNX2_RV2P_STATUS_RV2P_GEN_STAT1_CNT (1L<<9) +#define BNX2_RV2P_STATUS_RV2P_GEN_STAT2_CNT (1L<<10) +#define BNX2_RV2P_STATUS_RV2P_GEN_STAT3_CNT (1L<<11) +#define BNX2_RV2P_STATUS_RV2P_GEN_STAT4_CNT (1L<<12) +#define BNX2_RV2P_STATUS_RV2P_GEN_STAT5_CNT (1L<<13) + +#define BNX2_RV2P_CONFIG 0x00002808 +#define BNX2_RV2P_CONFIG_STALL_PROC1 (1L<<0) +#define BNX2_RV2P_CONFIG_STALL_PROC2 (1L<<1) +#define BNX2_RV2P_CONFIG_PROC1_STALL_ON_ABORT0 (1L<<8) +#define BNX2_RV2P_CONFIG_PROC1_STALL_ON_ABORT1 (1L<<9) +#define BNX2_RV2P_CONFIG_PROC1_STALL_ON_ABORT2 (1L<<10) +#define BNX2_RV2P_CONFIG_PROC1_STALL_ON_ABORT3 (1L<<11) +#define BNX2_RV2P_CONFIG_PROC1_STALL_ON_ABORT4 (1L<<12) +#define BNX2_RV2P_CONFIG_PROC1_STALL_ON_ABORT5 (1L<<13) +#define BNX2_RV2P_CONFIG_PROC2_STALL_ON_ABORT0 (1L<<16) +#define BNX2_RV2P_CONFIG_PROC2_STALL_ON_ABORT1 (1L<<17) +#define BNX2_RV2P_CONFIG_PROC2_STALL_ON_ABORT2 (1L<<18) +#define BNX2_RV2P_CONFIG_PROC2_STALL_ON_ABORT3 (1L<<19) +#define BNX2_RV2P_CONFIG_PROC2_STALL_ON_ABORT4 (1L<<20) +#define BNX2_RV2P_CONFIG_PROC2_STALL_ON_ABORT5 (1L<<21) +#define BNX2_RV2P_CONFIG_PAGE_SIZE (0xfL<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_256 (0L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_512 (1L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_1K (2L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_2K (3L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_4K (4L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_8K (5L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_16K (6L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_32K (7L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_64K (8L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_128K (9L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_256K (10L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_512K (11L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_1M (12L<<24) + +#define BNX2_RV2P_GEN_BFR_ADDR_0 0x00002810 +#define BNX2_RV2P_GEN_BFR_ADDR_0_VALUE (0xffffL<<16) + +#define BNX2_RV2P_GEN_BFR_ADDR_1 0x00002814 +#define BNX2_RV2P_GEN_BFR_ADDR_1_VALUE (0xffffL<<16) + +#define BNX2_RV2P_GEN_BFR_ADDR_2 0x00002818 +#define BNX2_RV2P_GEN_BFR_ADDR_2_VALUE (0xffffL<<16) + +#define BNX2_RV2P_GEN_BFR_ADDR_3 0x0000281c +#define BNX2_RV2P_GEN_BFR_ADDR_3_VALUE (0xffffL<<16) + +#define BNX2_RV2P_INSTR_HIGH 0x00002830 +#define BNX2_RV2P_INSTR_HIGH_HIGH (0x1fL<<0) + +#define BNX2_RV2P_INSTR_LOW 0x00002834 +#define BNX2_RV2P_PROC1_ADDR_CMD 0x00002838 +#define BNX2_RV2P_PROC1_ADDR_CMD_ADD (0x3ffL<<0) +#define BNX2_RV2P_PROC1_ADDR_CMD_RDWR (1L<<31) + +#define BNX2_RV2P_PROC2_ADDR_CMD 0x0000283c +#define BNX2_RV2P_PROC2_ADDR_CMD_ADD (0x3ffL<<0) +#define BNX2_RV2P_PROC2_ADDR_CMD_RDWR (1L<<31) + +#define BNX2_RV2P_PROC1_GRC_DEBUG 0x00002840 +#define BNX2_RV2P_PROC2_GRC_DEBUG 0x00002844 +#define BNX2_RV2P_GRC_PROC_DEBUG 0x00002848 +#define BNX2_RV2P_DEBUG_VECT_PEEK 0x0000284c +#define BNX2_RV2P_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0) +#define BNX2_RV2P_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11) +#define BNX2_RV2P_DEBUG_VECT_PEEK_1_SEL (0xfL<<12) +#define BNX2_RV2P_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16) +#define BNX2_RV2P_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27) +#define BNX2_RV2P_DEBUG_VECT_PEEK_2_SEL (0xfL<<28) + +#define BNX2_RV2P_PFTQ_DATA 0x00002b40 +#define BNX2_RV2P_PFTQ_CMD 0x00002b78 +#define BNX2_RV2P_PFTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_RV2P_PFTQ_CMD_WR_TOP (1L<<10) +#define BNX2_RV2P_PFTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_RV2P_PFTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_RV2P_PFTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_RV2P_PFTQ_CMD_RD_DATA (1L<<26) +#define BNX2_RV2P_PFTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_RV2P_PFTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_RV2P_PFTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_RV2P_PFTQ_CMD_POP (1L<<30) +#define BNX2_RV2P_PFTQ_CMD_BUSY (1L<<31) + +#define BNX2_RV2P_PFTQ_CTL 0x00002b7c +#define BNX2_RV2P_PFTQ_CTL_INTERVENE (1L<<0) +#define BNX2_RV2P_PFTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_RV2P_PFTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_RV2P_PFTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_RV2P_PFTQ_CTL_CUR_DEPTH (0x3ffL<<22) + +#define BNX2_RV2P_TFTQ_DATA 0x00002b80 +#define BNX2_RV2P_TFTQ_CMD 0x00002bb8 +#define BNX2_RV2P_TFTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_RV2P_TFTQ_CMD_WR_TOP (1L<<10) +#define BNX2_RV2P_TFTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_RV2P_TFTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_RV2P_TFTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_RV2P_TFTQ_CMD_RD_DATA (1L<<26) +#define BNX2_RV2P_TFTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_RV2P_TFTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_RV2P_TFTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_RV2P_TFTQ_CMD_POP (1L<<30) +#define BNX2_RV2P_TFTQ_CMD_BUSY (1L<<31) + +#define BNX2_RV2P_TFTQ_CTL 0x00002bbc +#define BNX2_RV2P_TFTQ_CTL_INTERVENE (1L<<0) +#define BNX2_RV2P_TFTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_RV2P_TFTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_RV2P_TFTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_RV2P_TFTQ_CTL_CUR_DEPTH (0x3ffL<<22) + +#define BNX2_RV2P_MFTQ_DATA 0x00002bc0 +#define BNX2_RV2P_MFTQ_CMD 0x00002bf8 +#define BNX2_RV2P_MFTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_RV2P_MFTQ_CMD_WR_TOP (1L<<10) +#define BNX2_RV2P_MFTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_RV2P_MFTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_RV2P_MFTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_RV2P_MFTQ_CMD_RD_DATA (1L<<26) +#define BNX2_RV2P_MFTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_RV2P_MFTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_RV2P_MFTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_RV2P_MFTQ_CMD_POP (1L<<30) +#define BNX2_RV2P_MFTQ_CMD_BUSY (1L<<31) + +#define BNX2_RV2P_MFTQ_CTL 0x00002bfc +#define BNX2_RV2P_MFTQ_CTL_INTERVENE (1L<<0) +#define BNX2_RV2P_MFTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_RV2P_MFTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_RV2P_MFTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_RV2P_MFTQ_CTL_CUR_DEPTH (0x3ffL<<22) + + + +/* + * mq_reg definition + * offset: 0x3c00 + */ +#define BNX2_MQ_COMMAND 0x00003c00 +#define BNX2_MQ_COMMAND_ENABLED (1L<<0) +#define BNX2_MQ_COMMAND_OVERFLOW (1L<<4) +#define BNX2_MQ_COMMAND_WR_ERROR (1L<<5) +#define BNX2_MQ_COMMAND_RD_ERROR (1L<<6) + +#define BNX2_MQ_STATUS 0x00003c04 +#define BNX2_MQ_STATUS_CTX_ACCESS_STAT (1L<<16) +#define BNX2_MQ_STATUS_CTX_ACCESS64_STAT (1L<<17) +#define BNX2_MQ_STATUS_PCI_STALL_STAT (1L<<18) + +#define BNX2_MQ_CONFIG 0x00003c08 +#define BNX2_MQ_CONFIG_TX_HIGH_PRI (1L<<0) +#define BNX2_MQ_CONFIG_HALT_DIS (1L<<1) +#define BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE (0x7L<<4) +#define BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE_256 (0L<<4) +#define BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE_512 (1L<<4) +#define BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE_1K (2L<<4) +#define BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE_2K (3L<<4) +#define BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE_4K (4L<<4) +#define BNX2_MQ_CONFIG_MAX_DEPTH (0x7fL<<8) +#define BNX2_MQ_CONFIG_CUR_DEPTH (0x7fL<<20) + +#define BNX2_MQ_ENQUEUE1 0x00003c0c +#define BNX2_MQ_ENQUEUE1_OFFSET (0x3fL<<2) +#define BNX2_MQ_ENQUEUE1_CID (0x3fffL<<8) +#define BNX2_MQ_ENQUEUE1_BYTE_MASK (0xfL<<24) +#define BNX2_MQ_ENQUEUE1_KNL_MODE (1L<<28) + +#define BNX2_MQ_ENQUEUE2 0x00003c10 +#define BNX2_MQ_BAD_WR_ADDR 0x00003c14 +#define BNX2_MQ_BAD_RD_ADDR 0x00003c18 +#define BNX2_MQ_KNL_BYP_WIND_START 0x00003c1c +#define BNX2_MQ_KNL_BYP_WIND_START_VALUE (0xfffffL<<12) + +#define BNX2_MQ_KNL_WIND_END 0x00003c20 +#define BNX2_MQ_KNL_WIND_END_VALUE (0xffffffL<<8) + +#define BNX2_MQ_KNL_WRITE_MASK1 0x00003c24 +#define BNX2_MQ_KNL_TX_MASK1 0x00003c28 +#define BNX2_MQ_KNL_CMD_MASK1 0x00003c2c +#define BNX2_MQ_KNL_COND_ENQUEUE_MASK1 0x00003c30 +#define BNX2_MQ_KNL_RX_V2P_MASK1 0x00003c34 +#define BNX2_MQ_KNL_WRITE_MASK2 0x00003c38 +#define BNX2_MQ_KNL_TX_MASK2 0x00003c3c +#define BNX2_MQ_KNL_CMD_MASK2 0x00003c40 +#define BNX2_MQ_KNL_COND_ENQUEUE_MASK2 0x00003c44 +#define BNX2_MQ_KNL_RX_V2P_MASK2 0x00003c48 +#define BNX2_MQ_KNL_BYP_WRITE_MASK1 0x00003c4c +#define BNX2_MQ_KNL_BYP_TX_MASK1 0x00003c50 +#define BNX2_MQ_KNL_BYP_CMD_MASK1 0x00003c54 +#define BNX2_MQ_KNL_BYP_COND_ENQUEUE_MASK1 0x00003c58 +#define BNX2_MQ_KNL_BYP_RX_V2P_MASK1 0x00003c5c +#define BNX2_MQ_KNL_BYP_WRITE_MASK2 0x00003c60 +#define BNX2_MQ_KNL_BYP_TX_MASK2 0x00003c64 +#define BNX2_MQ_KNL_BYP_CMD_MASK2 0x00003c68 +#define BNX2_MQ_KNL_BYP_COND_ENQUEUE_MASK2 0x00003c6c +#define BNX2_MQ_KNL_BYP_RX_V2P_MASK2 0x00003c70 +#define BNX2_MQ_MEM_WR_ADDR 0x00003c74 +#define BNX2_MQ_MEM_WR_ADDR_VALUE (0x3fL<<0) + +#define BNX2_MQ_MEM_WR_DATA0 0x00003c78 +#define BNX2_MQ_MEM_WR_DATA0_VALUE (0xffffffffL<<0) + +#define BNX2_MQ_MEM_WR_DATA1 0x00003c7c +#define BNX2_MQ_MEM_WR_DATA1_VALUE (0xffffffffL<<0) + +#define BNX2_MQ_MEM_WR_DATA2 0x00003c80 +#define BNX2_MQ_MEM_WR_DATA2_VALUE (0x3fffffffL<<0) + +#define BNX2_MQ_MEM_RD_ADDR 0x00003c84 +#define BNX2_MQ_MEM_RD_ADDR_VALUE (0x3fL<<0) + +#define BNX2_MQ_MEM_RD_DATA0 0x00003c88 +#define BNX2_MQ_MEM_RD_DATA0_VALUE (0xffffffffL<<0) + +#define BNX2_MQ_MEM_RD_DATA1 0x00003c8c +#define BNX2_MQ_MEM_RD_DATA1_VALUE (0xffffffffL<<0) + +#define BNX2_MQ_MEM_RD_DATA2 0x00003c90 +#define BNX2_MQ_MEM_RD_DATA2_VALUE (0x3fffffffL<<0) + + + +/* + * tbdr_reg definition + * offset: 0x5000 + */ +#define BNX2_TBDR_COMMAND 0x00005000 +#define BNX2_TBDR_COMMAND_ENABLE (1L<<0) +#define BNX2_TBDR_COMMAND_SOFT_RST (1L<<1) +#define BNX2_TBDR_COMMAND_MSTR_ABORT (1L<<4) + +#define BNX2_TBDR_STATUS 0x00005004 +#define BNX2_TBDR_STATUS_DMA_WAIT (1L<<0) +#define BNX2_TBDR_STATUS_FTQ_WAIT (1L<<1) +#define BNX2_TBDR_STATUS_FIFO_OVERFLOW (1L<<2) +#define BNX2_TBDR_STATUS_FIFO_UNDERFLOW (1L<<3) +#define BNX2_TBDR_STATUS_SEARCHMISS_ERROR (1L<<4) +#define BNX2_TBDR_STATUS_FTQ_ENTRY_CNT (1L<<5) +#define BNX2_TBDR_STATUS_BURST_CNT (1L<<6) + +#define BNX2_TBDR_CONFIG 0x00005008 +#define BNX2_TBDR_CONFIG_MAX_BDS (0xffL<<0) +#define BNX2_TBDR_CONFIG_SWAP_MODE (1L<<8) +#define BNX2_TBDR_CONFIG_PRIORITY (1L<<9) +#define BNX2_TBDR_CONFIG_CACHE_NEXT_PAGE_PTRS (1L<<10) +#define BNX2_TBDR_CONFIG_PAGE_SIZE (0xfL<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_256 (0L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_512 (1L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_1K (2L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_2K (3L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_4K (4L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_8K (5L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_16K (6L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_32K (7L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_64K (8L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_128K (9L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_256K (10L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_512K (11L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_1M (12L<<24) + +#define BNX2_TBDR_DEBUG_VECT_PEEK 0x0000500c +#define BNX2_TBDR_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0) +#define BNX2_TBDR_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11) +#define BNX2_TBDR_DEBUG_VECT_PEEK_1_SEL (0xfL<<12) +#define BNX2_TBDR_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16) +#define BNX2_TBDR_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27) +#define BNX2_TBDR_DEBUG_VECT_PEEK_2_SEL (0xfL<<28) + +#define BNX2_TBDR_FTQ_DATA 0x000053c0 +#define BNX2_TBDR_FTQ_CMD 0x000053f8 +#define BNX2_TBDR_FTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_TBDR_FTQ_CMD_WR_TOP (1L<<10) +#define BNX2_TBDR_FTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_TBDR_FTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_TBDR_FTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_TBDR_FTQ_CMD_RD_DATA (1L<<26) +#define BNX2_TBDR_FTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_TBDR_FTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_TBDR_FTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_TBDR_FTQ_CMD_POP (1L<<30) +#define BNX2_TBDR_FTQ_CMD_BUSY (1L<<31) + +#define BNX2_TBDR_FTQ_CTL 0x000053fc +#define BNX2_TBDR_FTQ_CTL_INTERVENE (1L<<0) +#define BNX2_TBDR_FTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_TBDR_FTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_TBDR_FTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_TBDR_FTQ_CTL_CUR_DEPTH (0x3ffL<<22) + + + +/* + * tdma_reg definition + * offset: 0x5c00 + */ +#define BNX2_TDMA_COMMAND 0x00005c00 +#define BNX2_TDMA_COMMAND_ENABLED (1L<<0) +#define BNX2_TDMA_COMMAND_MASTER_ABORT (1L<<4) +#define BNX2_TDMA_COMMAND_BAD_L2_LENGTH_ABORT (1L<<7) + +#define BNX2_TDMA_STATUS 0x00005c04 +#define BNX2_TDMA_STATUS_DMA_WAIT (1L<<0) +#define BNX2_TDMA_STATUS_PAYLOAD_WAIT (1L<<1) +#define BNX2_TDMA_STATUS_PATCH_FTQ_WAIT (1L<<2) +#define BNX2_TDMA_STATUS_LOCK_WAIT (1L<<3) +#define BNX2_TDMA_STATUS_FTQ_ENTRY_CNT (1L<<16) +#define BNX2_TDMA_STATUS_BURST_CNT (1L<<17) + +#define BNX2_TDMA_CONFIG 0x00005c08 +#define BNX2_TDMA_CONFIG_ONE_DMA (1L<<0) +#define BNX2_TDMA_CONFIG_ONE_RECORD (1L<<1) +#define BNX2_TDMA_CONFIG_LIMIT_SZ (0xfL<<4) +#define BNX2_TDMA_CONFIG_LIMIT_SZ_64 (0L<<4) +#define BNX2_TDMA_CONFIG_LIMIT_SZ_128 (0x4L<<4) +#define BNX2_TDMA_CONFIG_LIMIT_SZ_256 (0x6L<<4) +#define BNX2_TDMA_CONFIG_LIMIT_SZ_512 (0x8L<<4) +#define BNX2_TDMA_CONFIG_LINE_SZ (0xfL<<8) +#define BNX2_TDMA_CONFIG_LINE_SZ_64 (0L<<8) +#define BNX2_TDMA_CONFIG_LINE_SZ_128 (4L<<8) +#define BNX2_TDMA_CONFIG_LINE_SZ_256 (6L<<8) +#define BNX2_TDMA_CONFIG_LINE_SZ_512 (8L<<8) +#define BNX2_TDMA_CONFIG_ALIGN_ENA (1L<<15) +#define BNX2_TDMA_CONFIG_CHK_L2_BD (1L<<16) +#define BNX2_TDMA_CONFIG_FIFO_CMP (0xfL<<20) + +#define BNX2_TDMA_PAYLOAD_PROD 0x00005c0c +#define BNX2_TDMA_PAYLOAD_PROD_VALUE (0x1fffL<<3) + +#define BNX2_TDMA_DBG_WATCHDOG 0x00005c10 +#define BNX2_TDMA_DBG_TRIGGER 0x00005c14 +#define BNX2_TDMA_DMAD_FSM 0x00005c80 +#define BNX2_TDMA_DMAD_FSM_BD_INVLD (1L<<0) +#define BNX2_TDMA_DMAD_FSM_PUSH (0xfL<<4) +#define BNX2_TDMA_DMAD_FSM_ARB_TBDC (0x3L<<8) +#define BNX2_TDMA_DMAD_FSM_ARB_CTX (1L<<12) +#define BNX2_TDMA_DMAD_FSM_DR_INTF (1L<<16) +#define BNX2_TDMA_DMAD_FSM_DMAD (0x7L<<20) +#define BNX2_TDMA_DMAD_FSM_BD (0xfL<<24) + +#define BNX2_TDMA_DMAD_STATUS 0x00005c84 +#define BNX2_TDMA_DMAD_STATUS_RHOLD_PUSH_ENTRY (0x3L<<0) +#define BNX2_TDMA_DMAD_STATUS_RHOLD_DMAD_ENTRY (0x3L<<4) +#define BNX2_TDMA_DMAD_STATUS_RHOLD_BD_ENTRY (0x3L<<8) +#define BNX2_TDMA_DMAD_STATUS_IFTQ_ENUM (0xfL<<12) + +#define BNX2_TDMA_DR_INTF_FSM 0x00005c88 +#define BNX2_TDMA_DR_INTF_FSM_L2_COMP (0x3L<<0) +#define BNX2_TDMA_DR_INTF_FSM_TPATQ (0x7L<<4) +#define BNX2_TDMA_DR_INTF_FSM_TPBUF (0x3L<<8) +#define BNX2_TDMA_DR_INTF_FSM_DR_BUF (0x7L<<12) +#define BNX2_TDMA_DR_INTF_FSM_DMAD (0x7L<<16) + +#define BNX2_TDMA_DR_INTF_STATUS 0x00005c8c +#define BNX2_TDMA_DR_INTF_STATUS_HOLE_PHASE (0x7L<<0) +#define BNX2_TDMA_DR_INTF_STATUS_DATA_AVAIL (0x3L<<4) +#define BNX2_TDMA_DR_INTF_STATUS_SHIFT_ADDR (0x7L<<8) +#define BNX2_TDMA_DR_INTF_STATUS_NXT_PNTR (0xfL<<12) +#define BNX2_TDMA_DR_INTF_STATUS_BYTE_COUNT (0x7L<<16) + +#define BNX2_TDMA_FTQ_DATA 0x00005fc0 +#define BNX2_TDMA_FTQ_CMD 0x00005ff8 +#define BNX2_TDMA_FTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_TDMA_FTQ_CMD_WR_TOP (1L<<10) +#define BNX2_TDMA_FTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_TDMA_FTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_TDMA_FTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_TDMA_FTQ_CMD_RD_DATA (1L<<26) +#define BNX2_TDMA_FTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_TDMA_FTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_TDMA_FTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_TDMA_FTQ_CMD_POP (1L<<30) +#define BNX2_TDMA_FTQ_CMD_BUSY (1L<<31) + +#define BNX2_TDMA_FTQ_CTL 0x00005ffc +#define BNX2_TDMA_FTQ_CTL_INTERVENE (1L<<0) +#define BNX2_TDMA_FTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_TDMA_FTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_TDMA_FTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_TDMA_FTQ_CTL_CUR_DEPTH (0x3ffL<<22) + + + +/* + * hc_reg definition + * offset: 0x6800 + */ +#define BNX2_HC_COMMAND 0x00006800 +#define BNX2_HC_COMMAND_ENABLE (1L<<0) +#define BNX2_HC_COMMAND_SKIP_ABORT (1L<<4) +#define BNX2_HC_COMMAND_COAL_NOW (1L<<16) +#define BNX2_HC_COMMAND_COAL_NOW_WO_INT (1L<<17) +#define BNX2_HC_COMMAND_STATS_NOW (1L<<18) +#define BNX2_HC_COMMAND_FORCE_INT (0x3L<<19) +#define BNX2_HC_COMMAND_FORCE_INT_NULL (0L<<19) +#define BNX2_HC_COMMAND_FORCE_INT_HIGH (1L<<19) +#define BNX2_HC_COMMAND_FORCE_INT_LOW (2L<<19) +#define BNX2_HC_COMMAND_FORCE_INT_FREE (3L<<19) +#define BNX2_HC_COMMAND_CLR_STAT_NOW (1L<<21) + +#define BNX2_HC_STATUS 0x00006804 +#define BNX2_HC_STATUS_MASTER_ABORT (1L<<0) +#define BNX2_HC_STATUS_PARITY_ERROR_STATE (1L<<1) +#define BNX2_HC_STATUS_PCI_CLK_CNT_STAT (1L<<16) +#define BNX2_HC_STATUS_CORE_CLK_CNT_STAT (1L<<17) +#define BNX2_HC_STATUS_NUM_STATUS_BLOCKS_STAT (1L<<18) +#define BNX2_HC_STATUS_NUM_INT_GEN_STAT (1L<<19) +#define BNX2_HC_STATUS_NUM_INT_MBOX_WR_STAT (1L<<20) +#define BNX2_HC_STATUS_CORE_CLKS_TO_HW_INTACK_STAT (1L<<23) +#define BNX2_HC_STATUS_CORE_CLKS_TO_SW_INTACK_STAT (1L<<24) +#define BNX2_HC_STATUS_CORE_CLKS_DURING_SW_INTACK_STAT (1L<<25) + +#define BNX2_HC_CONFIG 0x00006808 +#define BNX2_HC_CONFIG_COLLECT_STATS (1L<<0) +#define BNX2_HC_CONFIG_RX_TMR_MODE (1L<<1) +#define BNX2_HC_CONFIG_TX_TMR_MODE (1L<<2) +#define BNX2_HC_CONFIG_COM_TMR_MODE (1L<<3) +#define BNX2_HC_CONFIG_CMD_TMR_MODE (1L<<4) +#define BNX2_HC_CONFIG_STATISTIC_PRIORITY (1L<<5) +#define BNX2_HC_CONFIG_STATUS_PRIORITY (1L<<6) +#define BNX2_HC_CONFIG_STAT_MEM_ADDR (0xffL<<8) + +#define BNX2_HC_ATTN_BITS_ENABLE 0x0000680c +#define BNX2_HC_STATUS_ADDR_L 0x00006810 +#define BNX2_HC_STATUS_ADDR_H 0x00006814 +#define BNX2_HC_STATISTICS_ADDR_L 0x00006818 +#define BNX2_HC_STATISTICS_ADDR_H 0x0000681c +#define BNX2_HC_TX_QUICK_CONS_TRIP 0x00006820 +#define BNX2_HC_TX_QUICK_CONS_TRIP_VALUE (0xffL<<0) +#define BNX2_HC_TX_QUICK_CONS_TRIP_INT (0xffL<<16) + +#define BNX2_HC_COMP_PROD_TRIP 0x00006824 +#define BNX2_HC_COMP_PROD_TRIP_VALUE (0xffL<<0) +#define BNX2_HC_COMP_PROD_TRIP_INT (0xffL<<16) + +#define BNX2_HC_RX_QUICK_CONS_TRIP 0x00006828 +#define BNX2_HC_RX_QUICK_CONS_TRIP_VALUE (0xffL<<0) +#define BNX2_HC_RX_QUICK_CONS_TRIP_INT (0xffL<<16) + +#define BNX2_HC_RX_TICKS 0x0000682c +#define BNX2_HC_RX_TICKS_VALUE (0x3ffL<<0) +#define BNX2_HC_RX_TICKS_INT (0x3ffL<<16) + +#define BNX2_HC_TX_TICKS 0x00006830 +#define BNX2_HC_TX_TICKS_VALUE (0x3ffL<<0) +#define BNX2_HC_TX_TICKS_INT (0x3ffL<<16) + +#define BNX2_HC_COM_TICKS 0x00006834 +#define BNX2_HC_COM_TICKS_VALUE (0x3ffL<<0) +#define BNX2_HC_COM_TICKS_INT (0x3ffL<<16) + +#define BNX2_HC_CMD_TICKS 0x00006838 +#define BNX2_HC_CMD_TICKS_VALUE (0x3ffL<<0) +#define BNX2_HC_CMD_TICKS_INT (0x3ffL<<16) + +#define BNX2_HC_PERIODIC_TICKS 0x0000683c +#define BNX2_HC_PERIODIC_TICKS_HC_PERIODIC_TICKS (0xffffL<<0) + +#define BNX2_HC_STAT_COLLECT_TICKS 0x00006840 +#define BNX2_HC_STAT_COLLECT_TICKS_HC_STAT_COLL_TICKS (0xffL<<4) + +#define BNX2_HC_STATS_TICKS 0x00006844 +#define BNX2_HC_STATS_TICKS_HC_STAT_TICKS (0xffffL<<8) + +#define BNX2_HC_STAT_MEM_DATA 0x0000684c +#define BNX2_HC_STAT_GEN_SEL_0 0x00006850 +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0 (0x7fL<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT0 (0L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT1 (1L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT2 (2L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT3 (3L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT4 (4L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT5 (5L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT6 (6L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT7 (7L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT8 (8L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT9 (9L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT10 (10L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT11 (11L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXP_STAT0 (12L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXP_STAT1 (13L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXP_STAT2 (14L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXP_STAT3 (15L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXP_STAT4 (16L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXP_STAT5 (17L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXP_STAT6 (18L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXP_STAT7 (19L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT0 (20L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT1 (21L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT2 (22L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT3 (23L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT4 (24L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT5 (25L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT6 (26L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT7 (27L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT8 (28L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT9 (29L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT10 (30L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT11 (31L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TPAT_STAT0 (32L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TPAT_STAT1 (33L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TPAT_STAT2 (34L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TPAT_STAT3 (35L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CP_STAT0 (36L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CP_STAT1 (37L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CP_STAT2 (38L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CP_STAT3 (39L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CP_STAT4 (40L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CP_STAT5 (41L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CP_STAT6 (42L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CP_STAT7 (43L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MCP_STAT0 (44L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MCP_STAT1 (45L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MCP_STAT2 (46L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MCP_STAT3 (47L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MCP_STAT4 (48L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MCP_STAT5 (49L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MCP_STAT6 (50L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MCP_STAT7 (51L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_PCI_CLK_CNT (52L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CORE_CLK_CNT (53L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_STATUS_BLOCKS (54L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_INT_GEN (55L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_INT_MBOX_WR (56L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_TO_HW_INTACK (59L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_TO_SW_INTACK (60L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_DURING_SW_INTACK (61L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TSCH_CMD_CNT (62L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TSCH_SLOT_CNT (63L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CSCH_CMD_CNT (64L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CSCH_SLOT_CNT (65L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RLUPQ_VALID_CNT (66L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXPQ_VALID_CNT (67L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXPCQ_VALID_CNT (68L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2PPQ_VALID_CNT (69L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2PMQ_VALID_CNT (70L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2PTQ_VALID_CNT (71L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RDMAQ_VALID_CNT (72L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TSCHQ_VALID_CNT (73L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TBDRQ_VALID_CNT (74L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXPQ_VALID_CNT (75L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TDMAQ_VALID_CNT (76L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TPATQ_VALID_CNT (77L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TASQ_VALID_CNT (78L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CSQ_VALID_CNT (79L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CPQ_VALID_CNT (80L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COMXQ_VALID_CNT (81L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COMTQ_VALID_CNT (82L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COMQ_VALID_CNT (83L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MGMQ_VALID_CNT (84L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_READ_TRANSFERS_CNT (85L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_READ_DELAY_PCI_CLKS_CNT (86L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_BIG_READ_TRANSFERS_CNT (87L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_BIG_READ_DELAY_PCI_CLKS_CNT (88L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_BIG_READ_RETRY_AFTER_DATA_CNT (89L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_WRITE_TRANSFERS_CNT (90L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_WRITE_DELAY_PCI_CLKS_CNT (91L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_BIG_WRITE_TRANSFERS_CNT (92L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_BIG_WRITE_DELAY_PCI_CLKS_CNT (93L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_BIG_WRITE_RETRY_AFTER_DATA_CNT (94L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CTX_WR_CNT64 (95L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CTX_RD_CNT64 (96L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CTX_ACC_STALL_CLKS (97L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CTX_LOCK_STALL_CLKS (98L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MBQ_CTX_ACCESS_STAT (99L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MBQ_CTX_ACCESS64_STAT (100L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MBQ_PCI_STALL_STAT (101L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TBDR_FTQ_ENTRY_CNT (102L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TBDR_BURST_CNT (103L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TDMA_FTQ_ENTRY_CNT (104L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TDMA_BURST_CNT (105L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RDMA_FTQ_ENTRY_CNT (106L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RDMA_BURST_CNT (107L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RLUP_MATCH_CNT (108L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TMR_POLL_PASS_CNT (109L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TMR_TMR1_CNT (110L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TMR_TMR2_CNT (111L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TMR_TMR3_CNT (112L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TMR_TMR4_CNT (113L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TMR_TMR5_CNT (114L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2P_STAT0 (115L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2P_STAT1 (116L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2P_STAT2 (117L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2P_STAT3 (118L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2P_STAT4 (119L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2P_STAT5 (120L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RBDC_PROC1_MISS (121L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RBDC_PROC2_MISS (122L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RBDC_BURST_CNT (127L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_1 (0x7fL<<8) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_2 (0x7fL<<16) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_3 (0x7fL<<24) + +#define BNX2_HC_STAT_GEN_SEL_1 0x00006854 +#define BNX2_HC_STAT_GEN_SEL_1_GEN_SEL_4 (0x7fL<<0) +#define BNX2_HC_STAT_GEN_SEL_1_GEN_SEL_5 (0x7fL<<8) +#define BNX2_HC_STAT_GEN_SEL_1_GEN_SEL_6 (0x7fL<<16) +#define BNX2_HC_STAT_GEN_SEL_1_GEN_SEL_7 (0x7fL<<24) + +#define BNX2_HC_STAT_GEN_SEL_2 0x00006858 +#define BNX2_HC_STAT_GEN_SEL_2_GEN_SEL_8 (0x7fL<<0) +#define BNX2_HC_STAT_GEN_SEL_2_GEN_SEL_9 (0x7fL<<8) +#define BNX2_HC_STAT_GEN_SEL_2_GEN_SEL_10 (0x7fL<<16) +#define BNX2_HC_STAT_GEN_SEL_2_GEN_SEL_11 (0x7fL<<24) + +#define BNX2_HC_STAT_GEN_SEL_3 0x0000685c +#define BNX2_HC_STAT_GEN_SEL_3_GEN_SEL_12 (0x7fL<<0) +#define BNX2_HC_STAT_GEN_SEL_3_GEN_SEL_13 (0x7fL<<8) +#define BNX2_HC_STAT_GEN_SEL_3_GEN_SEL_14 (0x7fL<<16) +#define BNX2_HC_STAT_GEN_SEL_3_GEN_SEL_15 (0x7fL<<24) + +#define BNX2_HC_STAT_GEN_STAT0 0x00006888 +#define BNX2_HC_STAT_GEN_STAT1 0x0000688c +#define BNX2_HC_STAT_GEN_STAT2 0x00006890 +#define BNX2_HC_STAT_GEN_STAT3 0x00006894 +#define BNX2_HC_STAT_GEN_STAT4 0x00006898 +#define BNX2_HC_STAT_GEN_STAT5 0x0000689c +#define BNX2_HC_STAT_GEN_STAT6 0x000068a0 +#define BNX2_HC_STAT_GEN_STAT7 0x000068a4 +#define BNX2_HC_STAT_GEN_STAT8 0x000068a8 +#define BNX2_HC_STAT_GEN_STAT9 0x000068ac +#define BNX2_HC_STAT_GEN_STAT10 0x000068b0 +#define BNX2_HC_STAT_GEN_STAT11 0x000068b4 +#define BNX2_HC_STAT_GEN_STAT12 0x000068b8 +#define BNX2_HC_STAT_GEN_STAT13 0x000068bc +#define BNX2_HC_STAT_GEN_STAT14 0x000068c0 +#define BNX2_HC_STAT_GEN_STAT15 0x000068c4 +#define BNX2_HC_STAT_GEN_STAT_AC0 0x000068c8 +#define BNX2_HC_STAT_GEN_STAT_AC1 0x000068cc +#define BNX2_HC_STAT_GEN_STAT_AC2 0x000068d0 +#define BNX2_HC_STAT_GEN_STAT_AC3 0x000068d4 +#define BNX2_HC_STAT_GEN_STAT_AC4 0x000068d8 +#define BNX2_HC_STAT_GEN_STAT_AC5 0x000068dc +#define BNX2_HC_STAT_GEN_STAT_AC6 0x000068e0 +#define BNX2_HC_STAT_GEN_STAT_AC7 0x000068e4 +#define BNX2_HC_STAT_GEN_STAT_AC8 0x000068e8 +#define BNX2_HC_STAT_GEN_STAT_AC9 0x000068ec +#define BNX2_HC_STAT_GEN_STAT_AC10 0x000068f0 +#define BNX2_HC_STAT_GEN_STAT_AC11 0x000068f4 +#define BNX2_HC_STAT_GEN_STAT_AC12 0x000068f8 +#define BNX2_HC_STAT_GEN_STAT_AC13 0x000068fc +#define BNX2_HC_STAT_GEN_STAT_AC14 0x00006900 +#define BNX2_HC_STAT_GEN_STAT_AC15 0x00006904 +#define BNX2_HC_VIS 0x00006908 +#define BNX2_HC_VIS_STAT_BUILD_STATE (0xfL<<0) +#define BNX2_HC_VIS_STAT_BUILD_STATE_IDLE (0L<<0) +#define BNX2_HC_VIS_STAT_BUILD_STATE_START (1L<<0) +#define BNX2_HC_VIS_STAT_BUILD_STATE_REQUEST (2L<<0) +#define BNX2_HC_VIS_STAT_BUILD_STATE_UPDATE64 (3L<<0) +#define BNX2_HC_VIS_STAT_BUILD_STATE_UPDATE32 (4L<<0) +#define BNX2_HC_VIS_STAT_BUILD_STATE_UPDATE_DONE (5L<<0) +#define BNX2_HC_VIS_STAT_BUILD_STATE_DMA (6L<<0) +#define BNX2_HC_VIS_STAT_BUILD_STATE_MSI_CONTROL (7L<<0) +#define BNX2_HC_VIS_STAT_BUILD_STATE_MSI_LOW (8L<<0) +#define BNX2_HC_VIS_STAT_BUILD_STATE_MSI_HIGH (9L<<0) +#define BNX2_HC_VIS_STAT_BUILD_STATE_MSI_DATA (10L<<0) +#define BNX2_HC_VIS_DMA_STAT_STATE (0xfL<<8) +#define BNX2_HC_VIS_DMA_STAT_STATE_IDLE (0L<<8) +#define BNX2_HC_VIS_DMA_STAT_STATE_STATUS_PARAM (1L<<8) +#define BNX2_HC_VIS_DMA_STAT_STATE_STATUS_DMA (2L<<8) +#define BNX2_HC_VIS_DMA_STAT_STATE_WRITE_COMP (3L<<8) +#define BNX2_HC_VIS_DMA_STAT_STATE_COMP (4L<<8) +#define BNX2_HC_VIS_DMA_STAT_STATE_STATISTIC_PARAM (5L<<8) +#define BNX2_HC_VIS_DMA_STAT_STATE_STATISTIC_DMA (6L<<8) +#define BNX2_HC_VIS_DMA_STAT_STATE_WRITE_COMP_1 (7L<<8) +#define BNX2_HC_VIS_DMA_STAT_STATE_WRITE_COMP_2 (8L<<8) +#define BNX2_HC_VIS_DMA_STAT_STATE_WAIT (9L<<8) +#define BNX2_HC_VIS_DMA_STAT_STATE_ABORT (15L<<8) +#define BNX2_HC_VIS_DMA_MSI_STATE (0x7L<<12) +#define BNX2_HC_VIS_STATISTIC_DMA_EN_STATE (0x3L<<15) +#define BNX2_HC_VIS_STATISTIC_DMA_EN_STATE_IDLE (0L<<15) +#define BNX2_HC_VIS_STATISTIC_DMA_EN_STATE_COUNT (1L<<15) +#define BNX2_HC_VIS_STATISTIC_DMA_EN_STATE_START (2L<<15) + +#define BNX2_HC_VIS_1 0x0000690c +#define BNX2_HC_VIS_1_HW_INTACK_STATE (1L<<4) +#define BNX2_HC_VIS_1_HW_INTACK_STATE_IDLE (0L<<4) +#define BNX2_HC_VIS_1_HW_INTACK_STATE_COUNT (1L<<4) +#define BNX2_HC_VIS_1_SW_INTACK_STATE (1L<<5) +#define BNX2_HC_VIS_1_SW_INTACK_STATE_IDLE (0L<<5) +#define BNX2_HC_VIS_1_SW_INTACK_STATE_COUNT (1L<<5) +#define BNX2_HC_VIS_1_DURING_SW_INTACK_STATE (1L<<6) +#define BNX2_HC_VIS_1_DURING_SW_INTACK_STATE_IDLE (0L<<6) +#define BNX2_HC_VIS_1_DURING_SW_INTACK_STATE_COUNT (1L<<6) +#define BNX2_HC_VIS_1_MAILBOX_COUNT_STATE (1L<<7) +#define BNX2_HC_VIS_1_MAILBOX_COUNT_STATE_IDLE (0L<<7) +#define BNX2_HC_VIS_1_MAILBOX_COUNT_STATE_COUNT (1L<<7) +#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE (0xfL<<17) +#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE_IDLE (0L<<17) +#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE_DMA (1L<<17) +#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE_UPDATE (2L<<17) +#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE_ASSIGN (3L<<17) +#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE_WAIT (4L<<17) +#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE_REG_UPDATE (5L<<17) +#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE_REG_ASSIGN (6L<<17) +#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE_REG_WAIT (7L<<17) +#define BNX2_HC_VIS_1_RAM_WR_ARB_STATE (0x3L<<21) +#define BNX2_HC_VIS_1_RAM_WR_ARB_STATE_NORMAL (0L<<21) +#define BNX2_HC_VIS_1_RAM_WR_ARB_STATE_CLEAR (1L<<21) +#define BNX2_HC_VIS_1_INT_GEN_STATE (1L<<23) +#define BNX2_HC_VIS_1_INT_GEN_STATE_DLE (0L<<23) +#define BNX2_HC_VIS_1_INT_GEN_STATE_NTERRUPT (1L<<23) +#define BNX2_HC_VIS_1_STAT_CHAN_ID (0x7L<<24) +#define BNX2_HC_VIS_1_INT_B (1L<<27) + +#define BNX2_HC_DEBUG_VECT_PEEK 0x00006910 +#define BNX2_HC_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0) +#define BNX2_HC_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11) +#define BNX2_HC_DEBUG_VECT_PEEK_1_SEL (0xfL<<12) +#define BNX2_HC_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16) +#define BNX2_HC_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27) +#define BNX2_HC_DEBUG_VECT_PEEK_2_SEL (0xfL<<28) + + + +/* + * txp_reg definition + * offset: 0x40000 + */ +#define BNX2_TXP_CPU_MODE 0x00045000 +#define BNX2_TXP_CPU_MODE_LOCAL_RST (1L<<0) +#define BNX2_TXP_CPU_MODE_STEP_ENA (1L<<1) +#define BNX2_TXP_CPU_MODE_PAGE_0_DATA_ENA (1L<<2) +#define BNX2_TXP_CPU_MODE_PAGE_0_INST_ENA (1L<<3) +#define BNX2_TXP_CPU_MODE_MSG_BIT1 (1L<<6) +#define BNX2_TXP_CPU_MODE_INTERRUPT_ENA (1L<<7) +#define BNX2_TXP_CPU_MODE_SOFT_HALT (1L<<10) +#define BNX2_TXP_CPU_MODE_BAD_DATA_HALT_ENA (1L<<11) +#define BNX2_TXP_CPU_MODE_BAD_INST_HALT_ENA (1L<<12) +#define BNX2_TXP_CPU_MODE_FIO_ABORT_HALT_ENA (1L<<13) +#define BNX2_TXP_CPU_MODE_SPAD_UNDERFLOW_HALT_ENA (1L<<15) + +#define BNX2_TXP_CPU_STATE 0x00045004 +#define BNX2_TXP_CPU_STATE_BREAKPOINT (1L<<0) +#define BNX2_TXP_CPU_STATE_BAD_INST_HALTED (1L<<2) +#define BNX2_TXP_CPU_STATE_PAGE_0_DATA_HALTED (1L<<3) +#define BNX2_TXP_CPU_STATE_PAGE_0_INST_HALTED (1L<<4) +#define BNX2_TXP_CPU_STATE_BAD_DATA_ADDR_HALTED (1L<<5) +#define BNX2_TXP_CPU_STATE_BAD_pc_HALTED (1L<<6) +#define BNX2_TXP_CPU_STATE_ALIGN_HALTED (1L<<7) +#define BNX2_TXP_CPU_STATE_FIO_ABORT_HALTED (1L<<8) +#define BNX2_TXP_CPU_STATE_SOFT_HALTED (1L<<10) +#define BNX2_TXP_CPU_STATE_SPAD_UNDERFLOW (1L<<11) +#define BNX2_TXP_CPU_STATE_INTERRRUPT (1L<<12) +#define BNX2_TXP_CPU_STATE_DATA_ACCESS_STALL (1L<<14) +#define BNX2_TXP_CPU_STATE_INST_FETCH_STALL (1L<<15) +#define BNX2_TXP_CPU_STATE_BLOCKED_READ (1L<<31) + +#define BNX2_TXP_CPU_EVENT_MASK 0x00045008 +#define BNX2_TXP_CPU_EVENT_MASK_BREAKPOINT_MASK (1L<<0) +#define BNX2_TXP_CPU_EVENT_MASK_BAD_INST_HALTED_MASK (1L<<2) +#define BNX2_TXP_CPU_EVENT_MASK_PAGE_0_DATA_HALTED_MASK (1L<<3) +#define BNX2_TXP_CPU_EVENT_MASK_PAGE_0_INST_HALTED_MASK (1L<<4) +#define BNX2_TXP_CPU_EVENT_MASK_BAD_DATA_ADDR_HALTED_MASK (1L<<5) +#define BNX2_TXP_CPU_EVENT_MASK_BAD_PC_HALTED_MASK (1L<<6) +#define BNX2_TXP_CPU_EVENT_MASK_ALIGN_HALTED_MASK (1L<<7) +#define BNX2_TXP_CPU_EVENT_MASK_FIO_ABORT_MASK (1L<<8) +#define BNX2_TXP_CPU_EVENT_MASK_SOFT_HALTED_MASK (1L<<10) +#define BNX2_TXP_CPU_EVENT_MASK_SPAD_UNDERFLOW_MASK (1L<<11) +#define BNX2_TXP_CPU_EVENT_MASK_INTERRUPT_MASK (1L<<12) + +#define BNX2_TXP_CPU_PROGRAM_COUNTER 0x0004501c +#define BNX2_TXP_CPU_INSTRUCTION 0x00045020 +#define BNX2_TXP_CPU_DATA_ACCESS 0x00045024 +#define BNX2_TXP_CPU_INTERRUPT_ENABLE 0x00045028 +#define BNX2_TXP_CPU_INTERRUPT_VECTOR 0x0004502c +#define BNX2_TXP_CPU_INTERRUPT_SAVED_PC 0x00045030 +#define BNX2_TXP_CPU_HW_BREAKPOINT 0x00045034 +#define BNX2_TXP_CPU_HW_BREAKPOINT_DISABLE (1L<<0) +#define BNX2_TXP_CPU_HW_BREAKPOINT_ADDRESS (0x3fffffffL<<2) + +#define BNX2_TXP_CPU_DEBUG_VECT_PEEK 0x00045038 +#define BNX2_TXP_CPU_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0) +#define BNX2_TXP_CPU_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11) +#define BNX2_TXP_CPU_DEBUG_VECT_PEEK_1_SEL (0xfL<<12) +#define BNX2_TXP_CPU_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16) +#define BNX2_TXP_CPU_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27) +#define BNX2_TXP_CPU_DEBUG_VECT_PEEK_2_SEL (0xfL<<28) + +#define BNX2_TXP_CPU_LAST_BRANCH_ADDR 0x00045048 +#define BNX2_TXP_CPU_LAST_BRANCH_ADDR_TYPE (1L<<1) +#define BNX2_TXP_CPU_LAST_BRANCH_ADDR_TYPE_JUMP (0L<<1) +#define BNX2_TXP_CPU_LAST_BRANCH_ADDR_TYPE_BRANCH (1L<<1) +#define BNX2_TXP_CPU_LAST_BRANCH_ADDR_LBA (0x3fffffffL<<2) + +#define BNX2_TXP_CPU_REG_FILE 0x00045200 +#define BNX2_TXP_FTQ_DATA 0x000453c0 +#define BNX2_TXP_FTQ_CMD 0x000453f8 +#define BNX2_TXP_FTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_TXP_FTQ_CMD_WR_TOP (1L<<10) +#define BNX2_TXP_FTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_TXP_FTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_TXP_FTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_TXP_FTQ_CMD_RD_DATA (1L<<26) +#define BNX2_TXP_FTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_TXP_FTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_TXP_FTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_TXP_FTQ_CMD_POP (1L<<30) +#define BNX2_TXP_FTQ_CMD_BUSY (1L<<31) + +#define BNX2_TXP_FTQ_CTL 0x000453fc +#define BNX2_TXP_FTQ_CTL_INTERVENE (1L<<0) +#define BNX2_TXP_FTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_TXP_FTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_TXP_FTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_TXP_FTQ_CTL_CUR_DEPTH (0x3ffL<<22) + +#define BNX2_TXP_SCRATCH 0x00060000 + + +/* + * tpat_reg definition + * offset: 0x80000 + */ +#define BNX2_TPAT_CPU_MODE 0x00085000 +#define BNX2_TPAT_CPU_MODE_LOCAL_RST (1L<<0) +#define BNX2_TPAT_CPU_MODE_STEP_ENA (1L<<1) +#define BNX2_TPAT_CPU_MODE_PAGE_0_DATA_ENA (1L<<2) +#define BNX2_TPAT_CPU_MODE_PAGE_0_INST_ENA (1L<<3) +#define BNX2_TPAT_CPU_MODE_MSG_BIT1 (1L<<6) +#define BNX2_TPAT_CPU_MODE_INTERRUPT_ENA (1L<<7) +#define BNX2_TPAT_CPU_MODE_SOFT_HALT (1L<<10) +#define BNX2_TPAT_CPU_MODE_BAD_DATA_HALT_ENA (1L<<11) +#define BNX2_TPAT_CPU_MODE_BAD_INST_HALT_ENA (1L<<12) +#define BNX2_TPAT_CPU_MODE_FIO_ABORT_HALT_ENA (1L<<13) +#define BNX2_TPAT_CPU_MODE_SPAD_UNDERFLOW_HALT_ENA (1L<<15) + +#define BNX2_TPAT_CPU_STATE 0x00085004 +#define BNX2_TPAT_CPU_STATE_BREAKPOINT (1L<<0) +#define BNX2_TPAT_CPU_STATE_BAD_INST_HALTED (1L<<2) +#define BNX2_TPAT_CPU_STATE_PAGE_0_DATA_HALTED (1L<<3) +#define BNX2_TPAT_CPU_STATE_PAGE_0_INST_HALTED (1L<<4) +#define BNX2_TPAT_CPU_STATE_BAD_DATA_ADDR_HALTED (1L<<5) +#define BNX2_TPAT_CPU_STATE_BAD_pc_HALTED (1L<<6) +#define BNX2_TPAT_CPU_STATE_ALIGN_HALTED (1L<<7) +#define BNX2_TPAT_CPU_STATE_FIO_ABORT_HALTED (1L<<8) +#define BNX2_TPAT_CPU_STATE_SOFT_HALTED (1L<<10) +#define BNX2_TPAT_CPU_STATE_SPAD_UNDERFLOW (1L<<11) +#define BNX2_TPAT_CPU_STATE_INTERRRUPT (1L<<12) +#define BNX2_TPAT_CPU_STATE_DATA_ACCESS_STALL (1L<<14) +#define BNX2_TPAT_CPU_STATE_INST_FETCH_STALL (1L<<15) +#define BNX2_TPAT_CPU_STATE_BLOCKED_READ (1L<<31) + +#define BNX2_TPAT_CPU_EVENT_MASK 0x00085008 +#define BNX2_TPAT_CPU_EVENT_MASK_BREAKPOINT_MASK (1L<<0) +#define BNX2_TPAT_CPU_EVENT_MASK_BAD_INST_HALTED_MASK (1L<<2) +#define BNX2_TPAT_CPU_EVENT_MASK_PAGE_0_DATA_HALTED_MASK (1L<<3) +#define BNX2_TPAT_CPU_EVENT_MASK_PAGE_0_INST_HALTED_MASK (1L<<4) +#define BNX2_TPAT_CPU_EVENT_MASK_BAD_DATA_ADDR_HALTED_MASK (1L<<5) +#define BNX2_TPAT_CPU_EVENT_MASK_BAD_PC_HALTED_MASK (1L<<6) +#define BNX2_TPAT_CPU_EVENT_MASK_ALIGN_HALTED_MASK (1L<<7) +#define BNX2_TPAT_CPU_EVENT_MASK_FIO_ABORT_MASK (1L<<8) +#define BNX2_TPAT_CPU_EVENT_MASK_SOFT_HALTED_MASK (1L<<10) +#define BNX2_TPAT_CPU_EVENT_MASK_SPAD_UNDERFLOW_MASK (1L<<11) +#define BNX2_TPAT_CPU_EVENT_MASK_INTERRUPT_MASK (1L<<12) + +#define BNX2_TPAT_CPU_PROGRAM_COUNTER 0x0008501c +#define BNX2_TPAT_CPU_INSTRUCTION 0x00085020 +#define BNX2_TPAT_CPU_DATA_ACCESS 0x00085024 +#define BNX2_TPAT_CPU_INTERRUPT_ENABLE 0x00085028 +#define BNX2_TPAT_CPU_INTERRUPT_VECTOR 0x0008502c +#define BNX2_TPAT_CPU_INTERRUPT_SAVED_PC 0x00085030 +#define BNX2_TPAT_CPU_HW_BREAKPOINT 0x00085034 +#define BNX2_TPAT_CPU_HW_BREAKPOINT_DISABLE (1L<<0) +#define BNX2_TPAT_CPU_HW_BREAKPOINT_ADDRESS (0x3fffffffL<<2) + +#define BNX2_TPAT_CPU_DEBUG_VECT_PEEK 0x00085038 +#define BNX2_TPAT_CPU_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0) +#define BNX2_TPAT_CPU_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11) +#define BNX2_TPAT_CPU_DEBUG_VECT_PEEK_1_SEL (0xfL<<12) +#define BNX2_TPAT_CPU_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16) +#define BNX2_TPAT_CPU_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27) +#define BNX2_TPAT_CPU_DEBUG_VECT_PEEK_2_SEL (0xfL<<28) + +#define BNX2_TPAT_CPU_LAST_BRANCH_ADDR 0x00085048 +#define BNX2_TPAT_CPU_LAST_BRANCH_ADDR_TYPE (1L<<1) +#define BNX2_TPAT_CPU_LAST_BRANCH_ADDR_TYPE_JUMP (0L<<1) +#define BNX2_TPAT_CPU_LAST_BRANCH_ADDR_TYPE_BRANCH (1L<<1) +#define BNX2_TPAT_CPU_LAST_BRANCH_ADDR_LBA (0x3fffffffL<<2) + +#define BNX2_TPAT_CPU_REG_FILE 0x00085200 +#define BNX2_TPAT_FTQ_DATA 0x000853c0 +#define BNX2_TPAT_FTQ_CMD 0x000853f8 +#define BNX2_TPAT_FTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_TPAT_FTQ_CMD_WR_TOP (1L<<10) +#define BNX2_TPAT_FTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_TPAT_FTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_TPAT_FTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_TPAT_FTQ_CMD_RD_DATA (1L<<26) +#define BNX2_TPAT_FTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_TPAT_FTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_TPAT_FTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_TPAT_FTQ_CMD_POP (1L<<30) +#define BNX2_TPAT_FTQ_CMD_BUSY (1L<<31) + +#define BNX2_TPAT_FTQ_CTL 0x000853fc +#define BNX2_TPAT_FTQ_CTL_INTERVENE (1L<<0) +#define BNX2_TPAT_FTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_TPAT_FTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_TPAT_FTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_TPAT_FTQ_CTL_CUR_DEPTH (0x3ffL<<22) + +#define BNX2_TPAT_SCRATCH 0x000a0000 + + +/* + * rxp_reg definition + * offset: 0xc0000 + */ +#define BNX2_RXP_CPU_MODE 0x000c5000 +#define BNX2_RXP_CPU_MODE_LOCAL_RST (1L<<0) +#define BNX2_RXP_CPU_MODE_STEP_ENA (1L<<1) +#define BNX2_RXP_CPU_MODE_PAGE_0_DATA_ENA (1L<<2) +#define BNX2_RXP_CPU_MODE_PAGE_0_INST_ENA (1L<<3) +#define BNX2_RXP_CPU_MODE_MSG_BIT1 (1L<<6) +#define BNX2_RXP_CPU_MODE_INTERRUPT_ENA (1L<<7) +#define BNX2_RXP_CPU_MODE_SOFT_HALT (1L<<10) +#define BNX2_RXP_CPU_MODE_BAD_DATA_HALT_ENA (1L<<11) +#define BNX2_RXP_CPU_MODE_BAD_INST_HALT_ENA (1L<<12) +#define BNX2_RXP_CPU_MODE_FIO_ABORT_HALT_ENA (1L<<13) +#define BNX2_RXP_CPU_MODE_SPAD_UNDERFLOW_HALT_ENA (1L<<15) + +#define BNX2_RXP_CPU_STATE 0x000c5004 +#define BNX2_RXP_CPU_STATE_BREAKPOINT (1L<<0) +#define BNX2_RXP_CPU_STATE_BAD_INST_HALTED (1L<<2) +#define BNX2_RXP_CPU_STATE_PAGE_0_DATA_HALTED (1L<<3) +#define BNX2_RXP_CPU_STATE_PAGE_0_INST_HALTED (1L<<4) +#define BNX2_RXP_CPU_STATE_BAD_DATA_ADDR_HALTED (1L<<5) +#define BNX2_RXP_CPU_STATE_BAD_pc_HALTED (1L<<6) +#define BNX2_RXP_CPU_STATE_ALIGN_HALTED (1L<<7) +#define BNX2_RXP_CPU_STATE_FIO_ABORT_HALTED (1L<<8) +#define BNX2_RXP_CPU_STATE_SOFT_HALTED (1L<<10) +#define BNX2_RXP_CPU_STATE_SPAD_UNDERFLOW (1L<<11) +#define BNX2_RXP_CPU_STATE_INTERRRUPT (1L<<12) +#define BNX2_RXP_CPU_STATE_DATA_ACCESS_STALL (1L<<14) +#define BNX2_RXP_CPU_STATE_INST_FETCH_STALL (1L<<15) +#define BNX2_RXP_CPU_STATE_BLOCKED_READ (1L<<31) + +#define BNX2_RXP_CPU_EVENT_MASK 0x000c5008 +#define BNX2_RXP_CPU_EVENT_MASK_BREAKPOINT_MASK (1L<<0) +#define BNX2_RXP_CPU_EVENT_MASK_BAD_INST_HALTED_MASK (1L<<2) +#define BNX2_RXP_CPU_EVENT_MASK_PAGE_0_DATA_HALTED_MASK (1L<<3) +#define BNX2_RXP_CPU_EVENT_MASK_PAGE_0_INST_HALTED_MASK (1L<<4) +#define BNX2_RXP_CPU_EVENT_MASK_BAD_DATA_ADDR_HALTED_MASK (1L<<5) +#define BNX2_RXP_CPU_EVENT_MASK_BAD_PC_HALTED_MASK (1L<<6) +#define BNX2_RXP_CPU_EVENT_MASK_ALIGN_HALTED_MASK (1L<<7) +#define BNX2_RXP_CPU_EVENT_MASK_FIO_ABORT_MASK (1L<<8) +#define BNX2_RXP_CPU_EVENT_MASK_SOFT_HALTED_MASK (1L<<10) +#define BNX2_RXP_CPU_EVENT_MASK_SPAD_UNDERFLOW_MASK (1L<<11) +#define BNX2_RXP_CPU_EVENT_MASK_INTERRUPT_MASK (1L<<12) + +#define BNX2_RXP_CPU_PROGRAM_COUNTER 0x000c501c +#define BNX2_RXP_CPU_INSTRUCTION 0x000c5020 +#define BNX2_RXP_CPU_DATA_ACCESS 0x000c5024 +#define BNX2_RXP_CPU_INTERRUPT_ENABLE 0x000c5028 +#define BNX2_RXP_CPU_INTERRUPT_VECTOR 0x000c502c +#define BNX2_RXP_CPU_INTERRUPT_SAVED_PC 0x000c5030 +#define BNX2_RXP_CPU_HW_BREAKPOINT 0x000c5034 +#define BNX2_RXP_CPU_HW_BREAKPOINT_DISABLE (1L<<0) +#define BNX2_RXP_CPU_HW_BREAKPOINT_ADDRESS (0x3fffffffL<<2) + +#define BNX2_RXP_CPU_DEBUG_VECT_PEEK 0x000c5038 +#define BNX2_RXP_CPU_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0) +#define BNX2_RXP_CPU_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11) +#define BNX2_RXP_CPU_DEBUG_VECT_PEEK_1_SEL (0xfL<<12) +#define BNX2_RXP_CPU_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16) +#define BNX2_RXP_CPU_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27) +#define BNX2_RXP_CPU_DEBUG_VECT_PEEK_2_SEL (0xfL<<28) + +#define BNX2_RXP_CPU_LAST_BRANCH_ADDR 0x000c5048 +#define BNX2_RXP_CPU_LAST_BRANCH_ADDR_TYPE (1L<<1) +#define BNX2_RXP_CPU_LAST_BRANCH_ADDR_TYPE_JUMP (0L<<1) +#define BNX2_RXP_CPU_LAST_BRANCH_ADDR_TYPE_BRANCH (1L<<1) +#define BNX2_RXP_CPU_LAST_BRANCH_ADDR_LBA (0x3fffffffL<<2) + +#define BNX2_RXP_CPU_REG_FILE 0x000c5200 +#define BNX2_RXP_CFTQ_DATA 0x000c5380 +#define BNX2_RXP_CFTQ_CMD 0x000c53b8 +#define BNX2_RXP_CFTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_RXP_CFTQ_CMD_WR_TOP (1L<<10) +#define BNX2_RXP_CFTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_RXP_CFTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_RXP_CFTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_RXP_CFTQ_CMD_RD_DATA (1L<<26) +#define BNX2_RXP_CFTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_RXP_CFTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_RXP_CFTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_RXP_CFTQ_CMD_POP (1L<<30) +#define BNX2_RXP_CFTQ_CMD_BUSY (1L<<31) + +#define BNX2_RXP_CFTQ_CTL 0x000c53bc +#define BNX2_RXP_CFTQ_CTL_INTERVENE (1L<<0) +#define BNX2_RXP_CFTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_RXP_CFTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_RXP_CFTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_RXP_CFTQ_CTL_CUR_DEPTH (0x3ffL<<22) + +#define BNX2_RXP_FTQ_DATA 0x000c53c0 +#define BNX2_RXP_FTQ_CMD 0x000c53f8 +#define BNX2_RXP_FTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_RXP_FTQ_CMD_WR_TOP (1L<<10) +#define BNX2_RXP_FTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_RXP_FTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_RXP_FTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_RXP_FTQ_CMD_RD_DATA (1L<<26) +#define BNX2_RXP_FTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_RXP_FTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_RXP_FTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_RXP_FTQ_CMD_POP (1L<<30) +#define BNX2_RXP_FTQ_CMD_BUSY (1L<<31) + +#define BNX2_RXP_FTQ_CTL 0x000c53fc +#define BNX2_RXP_FTQ_CTL_INTERVENE (1L<<0) +#define BNX2_RXP_FTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_RXP_FTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_RXP_FTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_RXP_FTQ_CTL_CUR_DEPTH (0x3ffL<<22) + +#define BNX2_RXP_SCRATCH 0x000e0000 + + +/* + * com_reg definition + * offset: 0x100000 + */ +#define BNX2_COM_CPU_MODE 0x00105000 +#define BNX2_COM_CPU_MODE_LOCAL_RST (1L<<0) +#define BNX2_COM_CPU_MODE_STEP_ENA (1L<<1) +#define BNX2_COM_CPU_MODE_PAGE_0_DATA_ENA (1L<<2) +#define BNX2_COM_CPU_MODE_PAGE_0_INST_ENA (1L<<3) +#define BNX2_COM_CPU_MODE_MSG_BIT1 (1L<<6) +#define BNX2_COM_CPU_MODE_INTERRUPT_ENA (1L<<7) +#define BNX2_COM_CPU_MODE_SOFT_HALT (1L<<10) +#define BNX2_COM_CPU_MODE_BAD_DATA_HALT_ENA (1L<<11) +#define BNX2_COM_CPU_MODE_BAD_INST_HALT_ENA (1L<<12) +#define BNX2_COM_CPU_MODE_FIO_ABORT_HALT_ENA (1L<<13) +#define BNX2_COM_CPU_MODE_SPAD_UNDERFLOW_HALT_ENA (1L<<15) + +#define BNX2_COM_CPU_STATE 0x00105004 +#define BNX2_COM_CPU_STATE_BREAKPOINT (1L<<0) +#define BNX2_COM_CPU_STATE_BAD_INST_HALTED (1L<<2) +#define BNX2_COM_CPU_STATE_PAGE_0_DATA_HALTED (1L<<3) +#define BNX2_COM_CPU_STATE_PAGE_0_INST_HALTED (1L<<4) +#define BNX2_COM_CPU_STATE_BAD_DATA_ADDR_HALTED (1L<<5) +#define BNX2_COM_CPU_STATE_BAD_pc_HALTED (1L<<6) +#define BNX2_COM_CPU_STATE_ALIGN_HALTED (1L<<7) +#define BNX2_COM_CPU_STATE_FIO_ABORT_HALTED (1L<<8) +#define BNX2_COM_CPU_STATE_SOFT_HALTED (1L<<10) +#define BNX2_COM_CPU_STATE_SPAD_UNDERFLOW (1L<<11) +#define BNX2_COM_CPU_STATE_INTERRRUPT (1L<<12) +#define BNX2_COM_CPU_STATE_DATA_ACCESS_STALL (1L<<14) +#define BNX2_COM_CPU_STATE_INST_FETCH_STALL (1L<<15) +#define BNX2_COM_CPU_STATE_BLOCKED_READ (1L<<31) + +#define BNX2_COM_CPU_EVENT_MASK 0x00105008 +#define BNX2_COM_CPU_EVENT_MASK_BREAKPOINT_MASK (1L<<0) +#define BNX2_COM_CPU_EVENT_MASK_BAD_INST_HALTED_MASK (1L<<2) +#define BNX2_COM_CPU_EVENT_MASK_PAGE_0_DATA_HALTED_MASK (1L<<3) +#define BNX2_COM_CPU_EVENT_MASK_PAGE_0_INST_HALTED_MASK (1L<<4) +#define BNX2_COM_CPU_EVENT_MASK_BAD_DATA_ADDR_HALTED_MASK (1L<<5) +#define BNX2_COM_CPU_EVENT_MASK_BAD_PC_HALTED_MASK (1L<<6) +#define BNX2_COM_CPU_EVENT_MASK_ALIGN_HALTED_MASK (1L<<7) +#define BNX2_COM_CPU_EVENT_MASK_FIO_ABORT_MASK (1L<<8) +#define BNX2_COM_CPU_EVENT_MASK_SOFT_HALTED_MASK (1L<<10) +#define BNX2_COM_CPU_EVENT_MASK_SPAD_UNDERFLOW_MASK (1L<<11) +#define BNX2_COM_CPU_EVENT_MASK_INTERRUPT_MASK (1L<<12) + +#define BNX2_COM_CPU_PROGRAM_COUNTER 0x0010501c +#define BNX2_COM_CPU_INSTRUCTION 0x00105020 +#define BNX2_COM_CPU_DATA_ACCESS 0x00105024 +#define BNX2_COM_CPU_INTERRUPT_ENABLE 0x00105028 +#define BNX2_COM_CPU_INTERRUPT_VECTOR 0x0010502c +#define BNX2_COM_CPU_INTERRUPT_SAVED_PC 0x00105030 +#define BNX2_COM_CPU_HW_BREAKPOINT 0x00105034 +#define BNX2_COM_CPU_HW_BREAKPOINT_DISABLE (1L<<0) +#define BNX2_COM_CPU_HW_BREAKPOINT_ADDRESS (0x3fffffffL<<2) + +#define BNX2_COM_CPU_DEBUG_VECT_PEEK 0x00105038 +#define BNX2_COM_CPU_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0) +#define BNX2_COM_CPU_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11) +#define BNX2_COM_CPU_DEBUG_VECT_PEEK_1_SEL (0xfL<<12) +#define BNX2_COM_CPU_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16) +#define BNX2_COM_CPU_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27) +#define BNX2_COM_CPU_DEBUG_VECT_PEEK_2_SEL (0xfL<<28) + +#define BNX2_COM_CPU_LAST_BRANCH_ADDR 0x00105048 +#define BNX2_COM_CPU_LAST_BRANCH_ADDR_TYPE (1L<<1) +#define BNX2_COM_CPU_LAST_BRANCH_ADDR_TYPE_JUMP (0L<<1) +#define BNX2_COM_CPU_LAST_BRANCH_ADDR_TYPE_BRANCH (1L<<1) +#define BNX2_COM_CPU_LAST_BRANCH_ADDR_LBA (0x3fffffffL<<2) + +#define BNX2_COM_CPU_REG_FILE 0x00105200 +#define BNX2_COM_COMXQ_FTQ_DATA 0x00105340 +#define BNX2_COM_COMXQ_FTQ_CMD 0x00105378 +#define BNX2_COM_COMXQ_FTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_COM_COMXQ_FTQ_CMD_WR_TOP (1L<<10) +#define BNX2_COM_COMXQ_FTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_COM_COMXQ_FTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_COM_COMXQ_FTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_COM_COMXQ_FTQ_CMD_RD_DATA (1L<<26) +#define BNX2_COM_COMXQ_FTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_COM_COMXQ_FTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_COM_COMXQ_FTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_COM_COMXQ_FTQ_CMD_POP (1L<<30) +#define BNX2_COM_COMXQ_FTQ_CMD_BUSY (1L<<31) + +#define BNX2_COM_COMXQ_FTQ_CTL 0x0010537c +#define BNX2_COM_COMXQ_FTQ_CTL_INTERVENE (1L<<0) +#define BNX2_COM_COMXQ_FTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_COM_COMXQ_FTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_COM_COMXQ_FTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_COM_COMXQ_FTQ_CTL_CUR_DEPTH (0x3ffL<<22) + +#define BNX2_COM_COMTQ_FTQ_DATA 0x00105380 +#define BNX2_COM_COMTQ_FTQ_CMD 0x001053b8 +#define BNX2_COM_COMTQ_FTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_COM_COMTQ_FTQ_CMD_WR_TOP (1L<<10) +#define BNX2_COM_COMTQ_FTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_COM_COMTQ_FTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_COM_COMTQ_FTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_COM_COMTQ_FTQ_CMD_RD_DATA (1L<<26) +#define BNX2_COM_COMTQ_FTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_COM_COMTQ_FTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_COM_COMTQ_FTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_COM_COMTQ_FTQ_CMD_POP (1L<<30) +#define BNX2_COM_COMTQ_FTQ_CMD_BUSY (1L<<31) + +#define BNX2_COM_COMTQ_FTQ_CTL 0x001053bc +#define BNX2_COM_COMTQ_FTQ_CTL_INTERVENE (1L<<0) +#define BNX2_COM_COMTQ_FTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_COM_COMTQ_FTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_COM_COMTQ_FTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_COM_COMTQ_FTQ_CTL_CUR_DEPTH (0x3ffL<<22) + +#define BNX2_COM_COMQ_FTQ_DATA 0x001053c0 +#define BNX2_COM_COMQ_FTQ_CMD 0x001053f8 +#define BNX2_COM_COMQ_FTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_COM_COMQ_FTQ_CMD_WR_TOP (1L<<10) +#define BNX2_COM_COMQ_FTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_COM_COMQ_FTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_COM_COMQ_FTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_COM_COMQ_FTQ_CMD_RD_DATA (1L<<26) +#define BNX2_COM_COMQ_FTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_COM_COMQ_FTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_COM_COMQ_FTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_COM_COMQ_FTQ_CMD_POP (1L<<30) +#define BNX2_COM_COMQ_FTQ_CMD_BUSY (1L<<31) + +#define BNX2_COM_COMQ_FTQ_CTL 0x001053fc +#define BNX2_COM_COMQ_FTQ_CTL_INTERVENE (1L<<0) +#define BNX2_COM_COMQ_FTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_COM_COMQ_FTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_COM_COMQ_FTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_COM_COMQ_FTQ_CTL_CUR_DEPTH (0x3ffL<<22) + +#define BNX2_COM_SCRATCH 0x00120000 + + +/* + * cp_reg definition + * offset: 0x180000 + */ +#define BNX2_CP_CPU_MODE 0x00185000 +#define BNX2_CP_CPU_MODE_LOCAL_RST (1L<<0) +#define BNX2_CP_CPU_MODE_STEP_ENA (1L<<1) +#define BNX2_CP_CPU_MODE_PAGE_0_DATA_ENA (1L<<2) +#define BNX2_CP_CPU_MODE_PAGE_0_INST_ENA (1L<<3) +#define BNX2_CP_CPU_MODE_MSG_BIT1 (1L<<6) +#define BNX2_CP_CPU_MODE_INTERRUPT_ENA (1L<<7) +#define BNX2_CP_CPU_MODE_SOFT_HALT (1L<<10) +#define BNX2_CP_CPU_MODE_BAD_DATA_HALT_ENA (1L<<11) +#define BNX2_CP_CPU_MODE_BAD_INST_HALT_ENA (1L<<12) +#define BNX2_CP_CPU_MODE_FIO_ABORT_HALT_ENA (1L<<13) +#define BNX2_CP_CPU_MODE_SPAD_UNDERFLOW_HALT_ENA (1L<<15) + +#define BNX2_CP_CPU_STATE 0x00185004 +#define BNX2_CP_CPU_STATE_BREAKPOINT (1L<<0) +#define BNX2_CP_CPU_STATE_BAD_INST_HALTED (1L<<2) +#define BNX2_CP_CPU_STATE_PAGE_0_DATA_HALTED (1L<<3) +#define BNX2_CP_CPU_STATE_PAGE_0_INST_HALTED (1L<<4) +#define BNX2_CP_CPU_STATE_BAD_DATA_ADDR_HALTED (1L<<5) +#define BNX2_CP_CPU_STATE_BAD_pc_HALTED (1L<<6) +#define BNX2_CP_CPU_STATE_ALIGN_HALTED (1L<<7) +#define BNX2_CP_CPU_STATE_FIO_ABORT_HALTED (1L<<8) +#define BNX2_CP_CPU_STATE_SOFT_HALTED (1L<<10) +#define BNX2_CP_CPU_STATE_SPAD_UNDERFLOW (1L<<11) +#define BNX2_CP_CPU_STATE_INTERRRUPT (1L<<12) +#define BNX2_CP_CPU_STATE_DATA_ACCESS_STALL (1L<<14) +#define BNX2_CP_CPU_STATE_INST_FETCH_STALL (1L<<15) +#define BNX2_CP_CPU_STATE_BLOCKED_READ (1L<<31) + +#define BNX2_CP_CPU_EVENT_MASK 0x00185008 +#define BNX2_CP_CPU_EVENT_MASK_BREAKPOINT_MASK (1L<<0) +#define BNX2_CP_CPU_EVENT_MASK_BAD_INST_HALTED_MASK (1L<<2) +#define BNX2_CP_CPU_EVENT_MASK_PAGE_0_DATA_HALTED_MASK (1L<<3) +#define BNX2_CP_CPU_EVENT_MASK_PAGE_0_INST_HALTED_MASK (1L<<4) +#define BNX2_CP_CPU_EVENT_MASK_BAD_DATA_ADDR_HALTED_MASK (1L<<5) +#define BNX2_CP_CPU_EVENT_MASK_BAD_PC_HALTED_MASK (1L<<6) +#define BNX2_CP_CPU_EVENT_MASK_ALIGN_HALTED_MASK (1L<<7) +#define BNX2_CP_CPU_EVENT_MASK_FIO_ABORT_MASK (1L<<8) +#define BNX2_CP_CPU_EVENT_MASK_SOFT_HALTED_MASK (1L<<10) +#define BNX2_CP_CPU_EVENT_MASK_SPAD_UNDERFLOW_MASK (1L<<11) +#define BNX2_CP_CPU_EVENT_MASK_INTERRUPT_MASK (1L<<12) + +#define BNX2_CP_CPU_PROGRAM_COUNTER 0x0018501c +#define BNX2_CP_CPU_INSTRUCTION 0x00185020 +#define BNX2_CP_CPU_DATA_ACCESS 0x00185024 +#define BNX2_CP_CPU_INTERRUPT_ENABLE 0x00185028 +#define BNX2_CP_CPU_INTERRUPT_VECTOR 0x0018502c +#define BNX2_CP_CPU_INTERRUPT_SAVED_PC 0x00185030 +#define BNX2_CP_CPU_HW_BREAKPOINT 0x00185034 +#define BNX2_CP_CPU_HW_BREAKPOINT_DISABLE (1L<<0) +#define BNX2_CP_CPU_HW_BREAKPOINT_ADDRESS (0x3fffffffL<<2) + +#define BNX2_CP_CPU_DEBUG_VECT_PEEK 0x00185038 +#define BNX2_CP_CPU_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0) +#define BNX2_CP_CPU_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11) +#define BNX2_CP_CPU_DEBUG_VECT_PEEK_1_SEL (0xfL<<12) +#define BNX2_CP_CPU_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16) +#define BNX2_CP_CPU_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27) +#define BNX2_CP_CPU_DEBUG_VECT_PEEK_2_SEL (0xfL<<28) + +#define BNX2_CP_CPU_LAST_BRANCH_ADDR 0x00185048 +#define BNX2_CP_CPU_LAST_BRANCH_ADDR_TYPE (1L<<1) +#define BNX2_CP_CPU_LAST_BRANCH_ADDR_TYPE_JUMP (0L<<1) +#define BNX2_CP_CPU_LAST_BRANCH_ADDR_TYPE_BRANCH (1L<<1) +#define BNX2_CP_CPU_LAST_BRANCH_ADDR_LBA (0x3fffffffL<<2) + +#define BNX2_CP_CPU_REG_FILE 0x00185200 +#define BNX2_CP_CPQ_FTQ_DATA 0x001853c0 +#define BNX2_CP_CPQ_FTQ_CMD 0x001853f8 +#define BNX2_CP_CPQ_FTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_CP_CPQ_FTQ_CMD_WR_TOP (1L<<10) +#define BNX2_CP_CPQ_FTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_CP_CPQ_FTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_CP_CPQ_FTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_CP_CPQ_FTQ_CMD_RD_DATA (1L<<26) +#define BNX2_CP_CPQ_FTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_CP_CPQ_FTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_CP_CPQ_FTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_CP_CPQ_FTQ_CMD_POP (1L<<30) +#define BNX2_CP_CPQ_FTQ_CMD_BUSY (1L<<31) + +#define BNX2_CP_CPQ_FTQ_CTL 0x001853fc +#define BNX2_CP_CPQ_FTQ_CTL_INTERVENE (1L<<0) +#define BNX2_CP_CPQ_FTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_CP_CPQ_FTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_CP_CPQ_FTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_CP_CPQ_FTQ_CTL_CUR_DEPTH (0x3ffL<<22) + +#define BNX2_CP_SCRATCH 0x001a0000 + + +/* + * mcp_reg definition + * offset: 0x140000 + */ +#define BNX2_MCP_CPU_MODE 0x00145000 +#define BNX2_MCP_CPU_MODE_LOCAL_RST (1L<<0) +#define BNX2_MCP_CPU_MODE_STEP_ENA (1L<<1) +#define BNX2_MCP_CPU_MODE_PAGE_0_DATA_ENA (1L<<2) +#define BNX2_MCP_CPU_MODE_PAGE_0_INST_ENA (1L<<3) +#define BNX2_MCP_CPU_MODE_MSG_BIT1 (1L<<6) +#define BNX2_MCP_CPU_MODE_INTERRUPT_ENA (1L<<7) +#define BNX2_MCP_CPU_MODE_SOFT_HALT (1L<<10) +#define BNX2_MCP_CPU_MODE_BAD_DATA_HALT_ENA (1L<<11) +#define BNX2_MCP_CPU_MODE_BAD_INST_HALT_ENA (1L<<12) +#define BNX2_MCP_CPU_MODE_FIO_ABORT_HALT_ENA (1L<<13) +#define BNX2_MCP_CPU_MODE_SPAD_UNDERFLOW_HALT_ENA (1L<<15) + +#define BNX2_MCP_CPU_STATE 0x00145004 +#define BNX2_MCP_CPU_STATE_BREAKPOINT (1L<<0) +#define BNX2_MCP_CPU_STATE_BAD_INST_HALTED (1L<<2) +#define BNX2_MCP_CPU_STATE_PAGE_0_DATA_HALTED (1L<<3) +#define BNX2_MCP_CPU_STATE_PAGE_0_INST_HALTED (1L<<4) +#define BNX2_MCP_CPU_STATE_BAD_DATA_ADDR_HALTED (1L<<5) +#define BNX2_MCP_CPU_STATE_BAD_pc_HALTED (1L<<6) +#define BNX2_MCP_CPU_STATE_ALIGN_HALTED (1L<<7) +#define BNX2_MCP_CPU_STATE_FIO_ABORT_HALTED (1L<<8) +#define BNX2_MCP_CPU_STATE_SOFT_HALTED (1L<<10) +#define BNX2_MCP_CPU_STATE_SPAD_UNDERFLOW (1L<<11) +#define BNX2_MCP_CPU_STATE_INTERRRUPT (1L<<12) +#define BNX2_MCP_CPU_STATE_DATA_ACCESS_STALL (1L<<14) +#define BNX2_MCP_CPU_STATE_INST_FETCH_STALL (1L<<15) +#define BNX2_MCP_CPU_STATE_BLOCKED_READ (1L<<31) + +#define BNX2_MCP_CPU_EVENT_MASK 0x00145008 +#define BNX2_MCP_CPU_EVENT_MASK_BREAKPOINT_MASK (1L<<0) +#define BNX2_MCP_CPU_EVENT_MASK_BAD_INST_HALTED_MASK (1L<<2) +#define BNX2_MCP_CPU_EVENT_MASK_PAGE_0_DATA_HALTED_MASK (1L<<3) +#define BNX2_MCP_CPU_EVENT_MASK_PAGE_0_INST_HALTED_MASK (1L<<4) +#define BNX2_MCP_CPU_EVENT_MASK_BAD_DATA_ADDR_HALTED_MASK (1L<<5) +#define BNX2_MCP_CPU_EVENT_MASK_BAD_PC_HALTED_MASK (1L<<6) +#define BNX2_MCP_CPU_EVENT_MASK_ALIGN_HALTED_MASK (1L<<7) +#define BNX2_MCP_CPU_EVENT_MASK_FIO_ABORT_MASK (1L<<8) +#define BNX2_MCP_CPU_EVENT_MASK_SOFT_HALTED_MASK (1L<<10) +#define BNX2_MCP_CPU_EVENT_MASK_SPAD_UNDERFLOW_MASK (1L<<11) +#define BNX2_MCP_CPU_EVENT_MASK_INTERRUPT_MASK (1L<<12) + +#define BNX2_MCP_CPU_PROGRAM_COUNTER 0x0014501c +#define BNX2_MCP_CPU_INSTRUCTION 0x00145020 +#define BNX2_MCP_CPU_DATA_ACCESS 0x00145024 +#define BNX2_MCP_CPU_INTERRUPT_ENABLE 0x00145028 +#define BNX2_MCP_CPU_INTERRUPT_VECTOR 0x0014502c +#define BNX2_MCP_CPU_INTERRUPT_SAVED_PC 0x00145030 +#define BNX2_MCP_CPU_HW_BREAKPOINT 0x00145034 +#define BNX2_MCP_CPU_HW_BREAKPOINT_DISABLE (1L<<0) +#define BNX2_MCP_CPU_HW_BREAKPOINT_ADDRESS (0x3fffffffL<<2) + +#define BNX2_MCP_CPU_DEBUG_VECT_PEEK 0x00145038 +#define BNX2_MCP_CPU_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0) +#define BNX2_MCP_CPU_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11) +#define BNX2_MCP_CPU_DEBUG_VECT_PEEK_1_SEL (0xfL<<12) +#define BNX2_MCP_CPU_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16) +#define BNX2_MCP_CPU_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27) +#define BNX2_MCP_CPU_DEBUG_VECT_PEEK_2_SEL (0xfL<<28) + +#define BNX2_MCP_CPU_LAST_BRANCH_ADDR 0x00145048 +#define BNX2_MCP_CPU_LAST_BRANCH_ADDR_TYPE (1L<<1) +#define BNX2_MCP_CPU_LAST_BRANCH_ADDR_TYPE_JUMP (0L<<1) +#define BNX2_MCP_CPU_LAST_BRANCH_ADDR_TYPE_BRANCH (1L<<1) +#define BNX2_MCP_CPU_LAST_BRANCH_ADDR_LBA (0x3fffffffL<<2) + +#define BNX2_MCP_CPU_REG_FILE 0x00145200 +#define BNX2_MCP_MCPQ_FTQ_DATA 0x001453c0 +#define BNX2_MCP_MCPQ_FTQ_CMD 0x001453f8 +#define BNX2_MCP_MCPQ_FTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_MCP_MCPQ_FTQ_CMD_WR_TOP (1L<<10) +#define BNX2_MCP_MCPQ_FTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_MCP_MCPQ_FTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_MCP_MCPQ_FTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_MCP_MCPQ_FTQ_CMD_RD_DATA (1L<<26) +#define BNX2_MCP_MCPQ_FTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_MCP_MCPQ_FTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_MCP_MCPQ_FTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_MCP_MCPQ_FTQ_CMD_POP (1L<<30) +#define BNX2_MCP_MCPQ_FTQ_CMD_BUSY (1L<<31) + +#define BNX2_MCP_MCPQ_FTQ_CTL 0x001453fc +#define BNX2_MCP_MCPQ_FTQ_CTL_INTERVENE (1L<<0) +#define BNX2_MCP_MCPQ_FTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_MCP_MCPQ_FTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_MCP_MCPQ_FTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_MCP_MCPQ_FTQ_CTL_CUR_DEPTH (0x3ffL<<22) + +#define BNX2_MCP_ROM 0x00150000 +#define BNX2_MCP_SCRATCH 0x00160000 + + +#define NUM_MC_HASH_REGISTERS 8 + + +/* PHY_ID1: bits 31-16; PHY_ID2: bits 15-0. */ +#define PHY_BCM5706_PHY_ID 0x00206160 + +#define PHY_ID(id) ((id) & 0xfffffff0) +#define PHY_REV_ID(id) ((id) & 0xf) + +#define MIN_ETHERNET_PACKET_SIZE 60 +#define MAX_ETHERNET_PACKET_SIZE 1514 +#define MAX_ETHERNET_JUMBO_PACKET_SIZE 9014 + +#define RX_COPY_THRESH 92 + +#define DMA_READ_CHANS 5 +#define DMA_WRITE_CHANS 3 + +#define BCM_PAGE_BITS 12 +#define BCM_PAGE_SIZE (1 << BCM_PAGE_BITS) + +#define TX_DESC_CNT (BCM_PAGE_SIZE / sizeof(struct tx_bd)) +#define MAX_TX_DESC_CNT (TX_DESC_CNT - 1) + +#define RX_DESC_CNT (BCM_PAGE_SIZE / sizeof(struct rx_bd)) +#define MAX_RX_DESC_CNT (RX_DESC_CNT - 1) + +#define NEXT_TX_BD(x) (((x) & (MAX_TX_DESC_CNT - 1)) == \ + (MAX_TX_DESC_CNT - 1)) ? \ + (x) + 2 : (x) + 1 + +#define TX_RING_IDX(x) ((x) & MAX_TX_DESC_CNT) + +#define NEXT_RX_BD(x) (((x) & (MAX_RX_DESC_CNT - 1)) == \ + (MAX_RX_DESC_CNT - 1)) ? \ + (x) + 2 : (x) + 1 + +#define RX_RING_IDX(x) ((x) & MAX_RX_DESC_CNT) + + +/* Context size. */ +#define CTX_SHIFT 7 +#define CTX_SIZE (1 << CTX_SHIFT) +#define CTX_MASK (CTX_SIZE - 1) +#define GET_CID_ADDR(_cid) ((_cid) << CTX_SHIFT) +#define GET_CID(_cid_addr) ((_cid_addr) >> CTX_SHIFT) + +#define PHY_CTX_SHIFT 6 +#define PHY_CTX_SIZE (1 << PHY_CTX_SHIFT) +#define PHY_CTX_MASK (PHY_CTX_SIZE - 1) +#define GET_PCID_ADDR(_pcid) ((_pcid) << PHY_CTX_SHIFT) +#define GET_PCID(_pcid_addr) ((_pcid_addr) >> PHY_CTX_SHIFT) + +#define MB_KERNEL_CTX_SHIFT 8 +#define MB_KERNEL_CTX_SIZE (1 << MB_KERNEL_CTX_SHIFT) +#define MB_KERNEL_CTX_MASK (MB_KERNEL_CTX_SIZE - 1) +#define MB_GET_CID_ADDR(_cid) (0x10000 + ((_cid) << MB_KERNEL_CTX_SHIFT)) + +#define MAX_CID_CNT 0x4000 +#define MAX_CID_ADDR (GET_CID_ADDR(MAX_CID_CNT)) +#define INVALID_CID_ADDR 0xffffffff + +#define TX_CID 16 +#define RX_CID 0 + +#define MB_TX_CID_ADDR MB_GET_CID_ADDR(TX_CID) +#define MB_RX_CID_ADDR MB_GET_CID_ADDR(RX_CID) + +struct sw_bd { + struct sk_buff *skb; + DECLARE_PCI_UNMAP_ADDR(mapping) +}; + +/* Buffered flash (Atmel: AT45DB011B) specific information */ +#define SEEPROM_PAGE_BITS 2 +#define SEEPROM_PHY_PAGE_SIZE (1 << SEEPROM_PAGE_BITS) +#define SEEPROM_BYTE_ADDR_MASK (SEEPROM_PHY_PAGE_SIZE-1) +#define SEEPROM_PAGE_SIZE 4 +#define SEEPROM_TOTAL_SIZE 65536 + +#define BUFFERED_FLASH_PAGE_BITS 9 +#define BUFFERED_FLASH_PHY_PAGE_SIZE (1 << BUFFERED_FLASH_PAGE_BITS) +#define BUFFERED_FLASH_BYTE_ADDR_MASK (BUFFERED_FLASH_PHY_PAGE_SIZE-1) +#define BUFFERED_FLASH_PAGE_SIZE 264 +#define BUFFERED_FLASH_TOTAL_SIZE 131072 + +#define SAIFUN_FLASH_PAGE_BITS 8 +#define SAIFUN_FLASH_PHY_PAGE_SIZE (1 << SAIFUN_FLASH_PAGE_BITS) +#define SAIFUN_FLASH_BYTE_ADDR_MASK (SAIFUN_FLASH_PHY_PAGE_SIZE-1) +#define SAIFUN_FLASH_PAGE_SIZE 256 +#define SAIFUN_FLASH_BASE_TOTAL_SIZE 65536 + +#define NVRAM_TIMEOUT_COUNT 30000 + + +#define FLASH_STRAP_MASK (BNX2_NVM_CFG1_FLASH_MODE | \ + BNX2_NVM_CFG1_BUFFER_MODE | \ + BNX2_NVM_CFG1_PROTECT_MODE | \ + BNX2_NVM_CFG1_FLASH_SIZE) + +struct flash_spec { + u32 strapping; + u32 config1; + u32 config2; + u32 config3; + u32 write1; + u32 buffered; + u32 page_bits; + u32 page_size; + u32 addr_mask; + u32 total_size; + u8 *name; +}; + +struct bnx2 { + /* Fields used in the tx and intr/napi performance paths are grouped */ + /* together in the beginning of the structure. */ + void __iomem *regview; + + struct net_device *dev; + struct pci_dev *pdev; + + atomic_t intr_sem; + + struct status_block *status_blk; + u32 last_status_idx; + + atomic_t tx_avail_bd; + struct tx_bd *tx_desc_ring; + struct sw_bd *tx_buf_ring; + u32 tx_prod_bseq; + u16 tx_prod; + u16 tx_cons; + +#ifdef BCM_VLAN + struct vlan_group *vlgrp; +#endif + + u32 rx_offset; + u32 rx_buf_use_size; /* useable size */ + u32 rx_buf_size; /* with alignment */ + struct rx_bd *rx_desc_ring; + struct sw_bd *rx_buf_ring; + u32 rx_prod_bseq; + u16 rx_prod; + u16 rx_cons; + + u32 rx_csum; + + /* Only used to synchronize netif_stop_queue/wake_queue when tx */ + /* ring is full */ + spinlock_t tx_lock; + + /* End of fileds used in the performance code paths. */ + + char *name; + + int timer_interval; + struct timer_list timer; + struct work_struct reset_task; + + /* Used to synchronize phy accesses. */ + spinlock_t phy_lock; + + u32 flags; +#define PCIX_FLAG 1 +#define PCI_32BIT_FLAG 2 +#define ONE_TDMA_FLAG 4 /* no longer used */ +#define NO_WOL_FLAG 8 +#define USING_DAC_FLAG 0x10 +#define USING_MSI_FLAG 0x20 + + u32 phy_flags; +#define PHY_SERDES_FLAG 1 +#define PHY_CRC_FIX_FLAG 2 +#define PHY_PARALLEL_DETECT_FLAG 4 +#define PHY_INT_MODE_MASK_FLAG 0x300 +#define PHY_INT_MODE_AUTO_POLLING_FLAG 0x100 +#define PHY_INT_MODE_LINK_READY_FLAG 0x200 + + u32 chip_id; + /* chip num:16-31, rev:12-15, metal:4-11, bond_id:0-3 */ +#define CHIP_NUM(bp) (((bp)->chip_id) & 0xffff0000) +#define CHIP_NUM_5706 0x57060000 + +#define CHIP_REV(bp) (((bp)->chip_id) & 0x0000f000) +#define CHIP_REV_Ax 0x00000000 +#define CHIP_REV_Bx 0x00001000 +#define CHIP_REV_Cx 0x00002000 + +#define CHIP_METAL(bp) (((bp)->chip_id) & 0x00000ff0) +#define CHIP_BONDING(bp) (((bp)->chip_id) & 0x0000000f) + +#define CHIP_ID(bp) (((bp)->chip_id) & 0xfffffff0) +#define CHIP_ID_5706_A0 0x57060000 +#define CHIP_ID_5706_A1 0x57060010 + +#define CHIP_BOND_ID(bp) (((bp)->chip_id) & 0xf) + +/* A serdes chip will have the first bit of the bond id set. */ +#define CHIP_BOND_ID_SERDES_BIT 0x01 + + u32 phy_addr; + u32 phy_id; + + u16 bus_speed_mhz; + u8 wol; + + u8 fw_timed_out; + + u16 fw_wr_seq; + u16 fw_drv_pulse_wr_seq; + + int tx_ring_size; + dma_addr_t tx_desc_mapping; + + + int rx_ring_size; + dma_addr_t rx_desc_mapping; + + u16 tx_quick_cons_trip; + u16 tx_quick_cons_trip_int; + u16 rx_quick_cons_trip; + u16 rx_quick_cons_trip_int; + u16 comp_prod_trip; + u16 comp_prod_trip_int; + u16 tx_ticks; + u16 tx_ticks_int; + u16 com_ticks; + u16 com_ticks_int; + u16 cmd_ticks; + u16 cmd_ticks_int; + u16 rx_ticks; + u16 rx_ticks_int; + + u32 stats_ticks; + + dma_addr_t status_blk_mapping; + + struct statistics_block *stats_blk; + dma_addr_t stats_blk_mapping; + + u32 rx_mode; + + u16 req_line_speed; + u8 req_duplex; + + u8 link_up; + + u16 line_speed; + u8 duplex; + u8 flow_ctrl; /* actual flow ctrl settings */ + /* may be different from */ + /* req_flow_ctrl if autoneg */ +#define FLOW_CTRL_TX 1 +#define FLOW_CTRL_RX 2 + + u32 advertising; + + u8 req_flow_ctrl; /* flow ctrl advertisement */ + /* settings or forced */ + /* settings */ + u8 autoneg; +#define AUTONEG_SPEED 1 +#define AUTONEG_FLOW_CTRL 2 + + u8 loopback; +#define MAC_LOOPBACK 1 +#define PHY_LOOPBACK 2 + + u8 serdes_an_pending; +#define SERDES_AN_TIMEOUT (2 * HZ) + + u8 mac_addr[8]; + + u32 fw_ver; + + int pm_cap; + int pcix_cap; + + struct net_device_stats net_stats; + + struct flash_spec *flash_info; +}; + +static u32 bnx2_reg_rd_ind(struct bnx2 *bp, u32 offset); +static void bnx2_reg_wr_ind(struct bnx2 *bp, u32 offset, u32 val); + +#define REG_RD(bp, offset) \ + readl(bp->regview + offset) + +#define REG_WR(bp, offset, val) \ + writel(val, bp->regview + offset) + +#define REG_WR16(bp, offset, val) \ + writew(val, bp->regview + offset) + +#define REG_RD_IND(bp, offset) \ + bnx2_reg_rd_ind(bp, offset) + +#define REG_WR_IND(bp, offset, val) \ + bnx2_reg_wr_ind(bp, offset, val) + +/* Indirect context access. Unlike the MBQ_WR, these macros will not + * trigger a chip event. */ +static void bnx2_ctx_wr(struct bnx2 *bp, u32 cid_addr, u32 offset, u32 val); + +#define CTX_WR(bp, cid_addr, offset, val) \ + bnx2_ctx_wr(bp, cid_addr, offset, val) + +struct cpu_reg { + u32 mode; + u32 mode_value_halt; + u32 mode_value_sstep; + + u32 state; + u32 state_value_clear; + + u32 gpr0; + u32 evmask; + u32 pc; + u32 inst; + u32 bp; + + u32 spad_base; + + u32 mips_view_base; +}; + +struct fw_info { + u32 ver_major; + u32 ver_minor; + u32 ver_fix; + + u32 start_addr; + + /* Text section. */ + u32 text_addr; + u32 text_len; + u32 text_index; + u32 *text; + + /* Data section. */ + u32 data_addr; + u32 data_len; + u32 data_index; + u32 *data; + + /* SBSS section. */ + u32 sbss_addr; + u32 sbss_len; + u32 sbss_index; + u32 *sbss; + + /* BSS section. */ + u32 bss_addr; + u32 bss_len; + u32 bss_index; + u32 *bss; + + /* Read-only section. */ + u32 rodata_addr; + u32 rodata_len; + u32 rodata_index; + u32 *rodata; +}; + +#define RV2P_PROC1 0 +#define RV2P_PROC2 1 + + +/* This value (in milliseconds) determines the frequency of the driver + * issuing the PULSE message code. The firmware monitors this periodic + * pulse to determine when to switch to an OS-absent mode. */ +#define DRV_PULSE_PERIOD_MS 250 + +/* This value (in milliseconds) determines how long the driver should + * wait for an acknowledgement from the firmware before timing out. Once + * the firmware has timed out, the driver will assume there is no firmware + * running and there won't be any firmware-driver synchronization during a + * driver reset. */ +#define FW_ACK_TIME_OUT_MS 50 + + +#define BNX2_DRV_RESET_SIGNATURE 0x00000000 +#define BNX2_DRV_RESET_SIGNATURE_MAGIC 0x4841564b /* HAVK */ +//#define DRV_RESET_SIGNATURE_MAGIC 0x47495352 /* RSIG */ + +#define BNX2_DRV_MB 0x00000004 +#define BNX2_DRV_MSG_CODE 0xff000000 +#define BNX2_DRV_MSG_CODE_RESET 0x01000000 +#define BNX2_DRV_MSG_CODE_UNLOAD 0x02000000 +#define BNX2_DRV_MSG_CODE_SHUTDOWN 0x03000000 +#define BNX2_DRV_MSG_CODE_SUSPEND_WOL 0x04000000 +#define BNX2_DRV_MSG_CODE_FW_TIMEOUT 0x05000000 +#define BNX2_DRV_MSG_CODE_PULSE 0x06000000 +#define BNX2_DRV_MSG_CODE_DIAG 0x07000000 +#define BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL 0x09000000 + +#define BNX2_DRV_MSG_DATA 0x00ff0000 +#define BNX2_DRV_MSG_DATA_WAIT0 0x00010000 +#define BNX2_DRV_MSG_DATA_WAIT1 0x00020000 +#define BNX2_DRV_MSG_DATA_WAIT2 0x00030000 +#define BNX2_DRV_MSG_DATA_WAIT3 0x00040000 + +#define BNX2_DRV_MSG_SEQ 0x0000ffff + +#define BNX2_FW_MB 0x00000008 +#define BNX2_FW_MSG_ACK 0x0000ffff +#define BNX2_FW_MSG_STATUS_MASK 0x00ff0000 +#define BNX2_FW_MSG_STATUS_OK 0x00000000 +#define BNX2_FW_MSG_STATUS_FAILURE 0x00ff0000 + +#define BNX2_LINK_STATUS 0x0000000c + +#define BNX2_DRV_PULSE_MB 0x00000010 +#define BNX2_DRV_PULSE_SEQ_MASK 0x0000ffff + +/* Indicate to the firmware not to go into the + * OS absent when it is not getting driver pulse. + * This is used for debugging. */ +#define BNX2_DRV_MSG_DATA_PULSE_CODE_ALWAYS_ALIVE 0x00010000 + +#define BNX2_DEV_INFO_SIGNATURE 0x00000020 +#define BNX2_DEV_INFO_SIGNATURE_MAGIC 0x44564900 +#define BNX2_DEV_INFO_SIGNATURE_MAGIC_MASK 0xffffff00 +#define BNX2_DEV_INFO_FEATURE_CFG_VALID 0x01 +#define BNX2_DEV_INFO_SECONDARY_PORT 0x80 +#define BNX2_DEV_INFO_DRV_ALWAYS_ALIVE 0x40 + +#define BNX2_SHARED_HW_CFG_PART_NUM 0x00000024 + +#define BNX2_SHARED_HW_CFG_POWER_DISSIPATED 0x00000034 +#define BNX2_SHARED_HW_CFG_POWER_STATE_D3_MASK 0xff000000 +#define BNX2_SHARED_HW_CFG_POWER_STATE_D2_MASK 0xff0000 +#define BNX2_SHARED_HW_CFG_POWER_STATE_D1_MASK 0xff00 +#define BNX2_SHARED_HW_CFG_POWER_STATE_D0_MASK 0xff + +#define BNX2_SHARED_HW_CFG POWER_CONSUMED 0x00000038 +#define BNX2_SHARED_HW_CFG_CONFIG 0x0000003c +#define BNX2_SHARED_HW_CFG_DESIGN_NIC 0 +#define BNX2_SHARED_HW_CFG_DESIGN_LOM 0x1 +#define BNX2_SHARED_HW_CFG_PHY_COPPER 0 +#define BNX2_SHARED_HW_CFG_PHY_FIBER 0x2 +#define BNX2_SHARED_HW_CFG_LED_MODE_SHIFT_BITS 8 +#define BNX2_SHARED_HW_CFG_LED_MODE_MASK 0x300 +#define BNX2_SHARED_HW_CFG_LED_MODE_MAC 0 +#define BNX2_SHARED_HW_CFG_LED_MODE_GPHY1 0x100 +#define BNX2_SHARED_HW_CFG_LED_MODE_GPHY2 0x200 + +#define BNX2_DEV_INFO_BC_REV 0x0000004c + +#define BNX2_PORT_HW_CFG_MAC_UPPER 0x00000050 +#define BNX2_PORT_HW_CFG_UPPERMAC_MASK 0xffff + +#define BNX2_PORT_HW_CFG_MAC_LOWER 0x00000054 +#define BNX2_PORT_HW_CFG_CONFIG 0x00000058 + +#define BNX2_PORT_HW_CFG_IMD_MAC_A_UPPER 0x00000068 +#define BNX2_PORT_HW_CFG_IMD_MAC_A_LOWER 0x0000006c +#define BNX2_PORT_HW_CFG_IMD_MAC_B_UPPER 0x00000070 +#define BNX2_PORT_HW_CFG_IMD_MAC_B_LOWER 0x00000074 +#define BNX2_PORT_HW_CFG_ISCSI_MAC_UPPER 0x00000078 +#define BNX2_PORT_HW_CFG_ISCSI_MAC_LOWER 0x0000007c + +#define BNX2_DEV_INFO_PER_PORT_HW_CONFIG2 0x000000b4 + +#define BNX2_DEV_INFO_FORMAT_REV 0x000000c4 +#define BNX2_DEV_INFO_FORMAT_REV_MASK 0xff000000 +#define BNX2_DEV_INFO_FORMAT_REV_ID ('A' << 24) + +#define BNX2_SHARED_FEATURE 0x000000c8 +#define BNX2_SHARED_FEATURE_MASK 0xffffffff + +#define BNX2_PORT_FEATURE 0x000000d8 +#define BNX2_PORT2_FEATURE 0x00000014c +#define BNX2_PORT_FEATURE_WOL_ENABLED 0x01000000 +#define BNX2_PORT_FEATURE_MBA_ENABLED 0x02000000 +#define BNX2_PORT_FEATURE_ASF_ENABLED 0x04000000 +#define BNX2_PORT_FEATURE_IMD_ENABLED 0x08000000 +#define BNX2_PORT_FEATURE_BAR1_SIZE_MASK 0xf +#define BNX2_PORT_FEATURE_BAR1_SIZE_DISABLED 0x0 +#define BNX2_PORT_FEATURE_BAR1_SIZE_64K 0x1 +#define BNX2_PORT_FEATURE_BAR1_SIZE_128K 0x2 +#define BNX2_PORT_FEATURE_BAR1_SIZE_256K 0x3 +#define BNX2_PORT_FEATURE_BAR1_SIZE_512K 0x4 +#define BNX2_PORT_FEATURE_BAR1_SIZE_1M 0x5 +#define BNX2_PORT_FEATURE_BAR1_SIZE_2M 0x6 +#define BNX2_PORT_FEATURE_BAR1_SIZE_4M 0x7 +#define BNX2_PORT_FEATURE_BAR1_SIZE_8M 0x8 +#define BNX2_PORT_FEATURE_BAR1_SIZE_16M 0x9 +#define BNX2_PORT_FEATURE_BAR1_SIZE_32M 0xa +#define BNX2_PORT_FEATURE_BAR1_SIZE_64M 0xb +#define BNX2_PORT_FEATURE_BAR1_SIZE_128M 0xc +#define BNX2_PORT_FEATURE_BAR1_SIZE_256M 0xd +#define BNX2_PORT_FEATURE_BAR1_SIZE_512M 0xe +#define BNX2_PORT_FEATURE_BAR1_SIZE_1G 0xf + +#define BNX2_PORT_FEATURE_WOL 0xdc +#define BNX2_PORT2_FEATURE_WOL 0x150 +#define BNX2_PORT_FEATURE_WOL_DEFAULT_SHIFT_BITS 4 +#define BNX2_PORT_FEATURE_WOL_DEFAULT_MASK 0x30 +#define BNX2_PORT_FEATURE_WOL_DEFAULT_DISABLE 0 +#define BNX2_PORT_FEATURE_WOL_DEFAULT_MAGIC 0x10 +#define BNX2_PORT_FEATURE_WOL_DEFAULT_ACPI 0x20 +#define BNX2_PORT_FEATURE_WOL_DEFAULT_MAGIC_AND_ACPI 0x30 +#define BNX2_PORT_FEATURE_WOL_LINK_SPEED_MASK 0xf +#define BNX2_PORT_FEATURE_WOL_LINK_SPEED_AUTONEG 0 +#define BNX2_PORT_FEATURE_WOL_LINK_SPEED_10HALF 1 +#define BNX2_PORT_FEATURE_WOL_LINK_SPEED_10FULL 2 +#define BNX2_PORT_FEATURE_WOL_LINK_SPEED_100HALF 3 +#define BNX2_PORT_FEATURE_WOL_LINK_SPEED_100FULL 4 +#define BNX2_PORT_FEATURE_WOL_LINK_SPEED_1000HALF 5 +#define BNX2_PORT_FEATURE_WOL_LINK_SPEED_1000FULL 6 +#define BNX2_PORT_FEATURE_WOL_AUTONEG_ADVERTISE_1000 0x40 +#define BNX2_PORT_FEATURE_WOL_RESERVED_PAUSE_CAP 0x400 +#define BNX2_PORT_FEATURE_WOL_RESERVED_ASYM_PAUSE_CAP 0x800 + +#define BNX2_PORT_FEATURE_MBA 0xe0 +#define BNX2_PORT2_FEATURE_MBA 0x154 +#define BNX2_PORT_FEATURE_MBA_BOOT_AGENT_TYPE_SHIFT_BITS 0 +#define BNX2_PORT_FEATURE_MBA_BOOT_AGENT_TYPE_MASK 0x3 +#define BNX2_PORT_FEATURE_MBA_BOOT_AGENT_TYPE_PXE 0 +#define BNX2_PORT_FEATURE_MBA_BOOT_AGENT_TYPE_RPL 1 +#define BNX2_PORT_FEATURE_MBA_BOOT_AGENT_TYPE_BOOTP 2 +#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_SHIFT_BITS 2 +#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_MASK 0x3c +#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_AUTONEG 0 +#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_10HALF 0x4 +#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_10FULL 0x8 +#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_100HALF 0xc +#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_100FULL 0x10 +#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_1000HALF 0x14 +#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_1000FULL 0x18 +#define BNX2_PORT_FEATURE_MBA_SETUP_PROMPT_ENABLE 0x40 +#define BNX2_PORT_FEATURE_MBA_HOTKEY_CTRL_S 0 +#define BNX2_PORT_FEATURE_MBA_HOTKEY_CTRL_B 0x80 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_SHIFT_BITS 8 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_MASK 0xff00 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_DISABLED 0 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_1K 0x100 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_2K 0x200 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_4K 0x300 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_8K 0x400 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_16K 0x500 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_32K 0x600 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_64K 0x700 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_128K 0x800 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_256K 0x900 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_512K 0xa00 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_1M 0xb00 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_2M 0xc00 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_4M 0xd00 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_8M 0xe00 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_16M 0xf00 +#define BNX2_PORT_FEATURE_MBA_MSG_TIMEOUT_SHIFT_BITS 16 +#define BNX2_PORT_FEATURE_MBA_MSG_TIMEOUT_MASK 0xf0000 +#define BNX2_PORT_FEATURE_MBA_BIOS_BOOTSTRAP_SHIFT_BITS 20 +#define BNX2_PORT_FEATURE_MBA_BIOS_BOOTSTRAP_MASK 0x300000 +#define BNX2_PORT_FEATURE_MBA_BIOS_BOOTSTRAP_AUTO 0 +#define BNX2_PORT_FEATURE_MBA_BIOS_BOOTSTRAP_BBS 0x100000 +#define BNX2_PORT_FEATURE_MBA_BIOS_BOOTSTRAP_INT18H 0x200000 +#define BNX2_PORT_FEATURE_MBA_BIOS_BOOTSTRAP_INT19H 0x300000 + +#define BNX2_PORT_FEATURE_IMD 0xe4 +#define BNX2_PORT2_FEATURE_IMD 0x158 +#define BNX2_PORT_FEATURE_IMD_LINK_OVERRIDE_DEFAULT 0 +#define BNX2_PORT_FEATURE_IMD_LINK_OVERRIDE_ENABLE 1 + +#define BNX2_PORT_FEATURE_VLAN 0xe8 +#define BNX2_PORT2_FEATURE_VLAN 0x15c +#define BNX2_PORT_FEATURE_MBA_VLAN_TAG_MASK 0xffff +#define BNX2_PORT_FEATURE_MBA_VLAN_ENABLE 0x10000 + +#define BNX2_BC_STATE_RESET_TYPE 0x000001c0 +#define BNX2_BC_STATE_RESET_TYPE_SIG 0x00005254 +#define BNX2_BC_STATE_RESET_TYPE_SIG_MASK 0x0000ffff +#define BNX2_BC_STATE_RESET_TYPE_NONE (BNX2_BC_STATE_RESET_TYPE_SIG | \ + 0x00010000) +#define BNX2_BC_STATE_RESET_TYPE_PCI (BNX2_BC_STATE_RESET_TYPE_SIG | \ + 0x00020000) +#define BNX2_BC_STATE_RESET_TYPE_VAUX (BNX2_BC_STATE_RESET_TYPE_SIG | \ + 0x00030000) +#define BNX2_BC_STATE_RESET_TYPE_DRV_MASK DRV_MSG_CODE +#define BNX2_BC_STATE_RESET_TYPE_DRV_RESET (BNX2_BC_STATE_RESET_TYPE_SIG | \ + DRV_MSG_CODE_RESET) +#define BNX2_BC_STATE_RESET_TYPE_DRV_UNLOAD (BNX2_BC_STATE_RESET_TYPE_SIG | \ + DRV_MSG_CODE_UNLOAD) +#define BNX2_BC_STATE_RESET_TYPE_DRV_SHUTDOWN (BNX2_BC_STATE_RESET_TYPE_SIG | \ + DRV_MSG_CODE_SHUTDOWN) +#define BNX2_BC_STATE_RESET_TYPE_DRV_WOL (BNX2_BC_STATE_RESET_TYPE_SIG | \ + DRV_MSG_CODE_WOL) +#define BNX2_BC_STATE_RESET_TYPE_DRV_DIAG (BNX2_BC_STATE_RESET_TYPE_SIG | \ + DRV_MSG_CODE_DIAG) +#define BNX2_BC_STATE_RESET_TYPE_VALUE(msg) (BNX2_BC_STATE_RESET_TYPE_SIG | \ + (msg)) + +#define BNX2_BC_STATE 0x000001c4 +#define BNX2_BC_STATE_ERR_MASK 0x0000ff00 +#define BNX2_BC_STATE_SIGN 0x42530000 +#define BNX2_BC_STATE_SIGN_MASK 0xffff0000 +#define BNX2_BC_STATE_BC1_START (BNX2_BC_STATE_SIGN | 0x1) +#define BNX2_BC_STATE_GET_NVM_CFG1 (BNX2_BC_STATE_SIGN | 0x2) +#define BNX2_BC_STATE_PROG_BAR (BNX2_BC_STATE_SIGN | 0x3) +#define BNX2_BC_STATE_INIT_VID (BNX2_BC_STATE_SIGN | 0x4) +#define BNX2_BC_STATE_GET_NVM_CFG2 (BNX2_BC_STATE_SIGN | 0x5) +#define BNX2_BC_STATE_APPLY_WKARND (BNX2_BC_STATE_SIGN | 0x6) +#define BNX2_BC_STATE_LOAD_BC2 (BNX2_BC_STATE_SIGN | 0x7) +#define BNX2_BC_STATE_GOING_BC2 (BNX2_BC_STATE_SIGN | 0x8) +#define BNX2_BC_STATE_GOING_DIAG (BNX2_BC_STATE_SIGN | 0x9) +#define BNX2_BC_STATE_RT_FINAL_INIT (BNX2_BC_STATE_SIGN | 0x81) +#define BNX2_BC_STATE_RT_WKARND (BNX2_BC_STATE_SIGN | 0x82) +#define BNX2_BC_STATE_RT_DRV_PULSE (BNX2_BC_STATE_SIGN | 0x83) +#define BNX2_BC_STATE_RT_FIOEVTS (BNX2_BC_STATE_SIGN | 0x84) +#define BNX2_BC_STATE_RT_DRV_CMD (BNX2_BC_STATE_SIGN | 0x85) +#define BNX2_BC_STATE_RT_LOW_POWER (BNX2_BC_STATE_SIGN | 0x86) +#define BNX2_BC_STATE_RT_SET_WOL (BNX2_BC_STATE_SIGN | 0x87) +#define BNX2_BC_STATE_RT_OTHER_FW (BNX2_BC_STATE_SIGN | 0x88) +#define BNX2_BC_STATE_RT_GOING_D3 (BNX2_BC_STATE_SIGN | 0x89) +#define BNX2_BC_STATE_ERR_BAD_VERSION (BNX2_BC_STATE_SIGN | 0x0100) +#define BNX2_BC_STATE_ERR_BAD_BC2_CRC (BNX2_BC_STATE_SIGN | 0x0200) +#define BNX2_BC_STATE_ERR_BC1_LOOP (BNX2_BC_STATE_SIGN | 0x0300) +#define BNX2_BC_STATE_ERR_UNKNOWN_CMD (BNX2_BC_STATE_SIGN | 0x0400) +#define BNX2_BC_STATE_ERR_DRV_DEAD (BNX2_BC_STATE_SIGN | 0x0500) +#define BNX2_BC_STATE_ERR_NO_RXP (BNX2_BC_STATE_SIGN | 0x0600) +#define BNX2_BC_STATE_ERR_TOO_MANY_RBUF (BNX2_BC_STATE_SIGN | 0x0700) + +#define BNX2_BC_STATE_DEBUG_CMD 0x1dc +#define BNX2_BC_STATE_BC_DBG_CMD_SIGNATURE 0x42440000 +#define BNX2_BC_STATE_BC_DBG_CMD_SIGNATURE_MASK 0xffff0000 +#define BNX2_BC_STATE_BC_DBG_CMD_LOOP_CNT_MASK 0xffff +#define BNX2_BC_STATE_BC_DBG_CMD_LOOP_INFINITE 0xffff + +#define HOST_VIEW_SHMEM_BASE 0x167c00 + +#endif diff --git a/drivers/net/bnx2_fw.h b/drivers/net/bnx2_fw.h new file mode 100644 index 00000000000..35f3a2ae5ef --- /dev/null +++ b/drivers/net/bnx2_fw.h @@ -0,0 +1,2468 @@ +/* bnx2_fw.h: Broadcom NX2 network driver. + * + * Copyright (c) 2004, 2005 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, except as noted below. + * + * This file contains firmware data derived from proprietary unpublished + * source code, Copyright (c) 2004, 2005 Broadcom Corporation. + * + * Permission is hereby granted for the distribution of this firmware data + * in hexadecimal or equivalent format, provided this copyright notice is + * accompanying it. + */ + + +static int bnx2_COM_b06FwReleaseMajor = 0x0; +static int bnx2_COM_b06FwReleaseMinor = 0x0; +static int bnx2_COM_b06FwReleaseFix = 0x0; +static u32 bnx2_COM_b06FwStartAddr = 0x080004a0; +static u32 bnx2_COM_b06FwTextAddr = 0x08000000; +static int bnx2_COM_b06FwTextLen = 0x4594; +static u32 bnx2_COM_b06FwDataAddr = 0x080045e0; +static int bnx2_COM_b06FwDataLen = 0x0; +static u32 bnx2_COM_b06FwRodataAddr = 0x08004598; +static int bnx2_COM_b06FwRodataLen = 0x18; +static u32 bnx2_COM_b06FwBssAddr = 0x08004600; +static int bnx2_COM_b06FwBssLen = 0x88; +static u32 bnx2_COM_b06FwSbssAddr = 0x080045e0; +static int bnx2_COM_b06FwSbssLen = 0x1c; +static u32 bnx2_COM_b06FwText[(0x4594/4) + 1] = { + 0x0a000128, 0x00000000, 0x00000000, 0x0000000d, 0x636f6d20, 0x302e362e, + 0x39000000, 0x00060902, 0x00000000, 0x00000003, 0x00000014, 0x00000032, + 0x00000003, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000010, 0x000003e8, 0x0000ea60, 0x00000001, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x0000ffff, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000002, 0x00000020, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x10000003, 0x00000000, 0x0000000d, + 0x0000000d, 0x3c020800, 0x244245e0, 0x3c030800, 0x24634688, 0xac400000, + 0x0043202b, 0x1480fffd, 0x24420004, 0x3c1d0800, 0x37bd7ffc, 0x03a0f021, + 0x3c100800, 0x261004a0, 0x3c1c0800, 0x279c45e0, 0x0e0001f2, 0x00000000, + 0x0000000d, 0x27bdffe8, 0x3c1a8000, 0x3c020008, 0x0342d825, 0x3c036010, + 0xafbf0010, 0x8c655000, 0x3c020800, 0x24470ac8, 0x3c040800, 0x24864600, + 0x2402ff7f, 0x00a22824, 0x34a5380c, 0xac655000, 0x00002821, 0x24020037, + 0x24030c80, 0xaf420008, 0xaf430024, 0xacc70000, 0x24a50001, 0x2ca20016, + 0x1440fffc, 0x24c60004, 0x24844600, 0x3c020800, 0x24420ad4, 0x3c030800, + 0x246309d4, 0xac820004, 0x3c020800, 0x24420618, 0x3c050800, 0x24a50ca0, + 0xac82000c, 0x3c020800, 0x24423100, 0xac830008, 0x3c030800, 0x246325c8, + 0xac820014, 0x3c020800, 0x24422b0c, 0xac830018, 0xac83001c, 0x3c030800, + 0x24630adc, 0xac820024, 0x3c020800, 0x24423040, 0xac83002c, 0x3c030800, + 0x24633060, 0xac820030, 0x3c020800, 0x24422f6c, 0xac830034, 0x3c030800, + 0x24632c60, 0xac82003c, 0x3c020800, 0x24420b6c, 0xac850010, 0xac850020, + 0xac830040, 0x0e000bd6, 0xac820050, 0x8fbf0010, 0x03e00008, 0x27bd0018, + 0x27bdffe0, 0xafb00010, 0x27500100, 0xafbf0018, 0xafb10014, 0x9203000b, + 0x24020003, 0x1462005b, 0x96110008, 0x32220001, 0x10400009, 0x27430080, + 0x8e020000, 0x96040014, 0x000211c2, 0x00021040, 0x00621821, 0xa4640000, + 0x0a0001cb, 0x3c020800, 0x3c020800, 0x8c430020, 0x1060002a, 0x3c030800, + 0x0e001006, 0x00000000, 0x97420108, 0x8f850018, 0x9743010c, 0x3042003e, + 0x00021400, 0x00621825, 0xaca30000, 0x8f840018, 0x8f420100, 0xac820004, + 0x97430116, 0x9742010e, 0x8f840018, 0x00031c00, 0x00431025, 0xac820008, + 0x97430110, 0x97440112, 0x8f850018, 0x00031c00, 0x00832025, 0xaca4000c, + 0x97420114, 0x8f840018, 0x3042ffff, 0xac820010, 0x8f830018, 0xac600014, + 0x8f820018, 0x3c030800, 0xac400018, 0x9462466e, 0x8f840018, 0x3c032000, + 0x00431025, 0xac82001c, 0x0e001044, 0x24040001, 0x3c030800, 0x8c620040, + 0x24420001, 0xac620040, 0x3c020800, 0x8c430044, 0x32240004, 0x24630001, + 0x10800017, 0xac430044, 0x8f4202b8, 0x04430007, 0x8e020020, 0x3c040800, + 0x8c830060, 0x24020001, 0x24630001, 0x0a0001ed, 0xac830060, 0x3c060800, + 0x8cc4005c, 0xaf420280, 0x96030016, 0x00001021, 0xa7430284, 0x8e050004, + 0x24840001, 0x3c031000, 0xaf450288, 0xaf4302b8, 0x0a0001ed, 0xacc4005c, + 0x32220002, 0x0a0001ed, 0x0002102b, 0x3c026000, 0xac400808, 0x0000000d, + 0x00001021, 0x8fbf0018, 0x8fb10014, 0x8fb00010, 0x03e00008, 0x27bd0020, + 0x27bdffc8, 0xafbf0034, 0xafbe0030, 0xafb7002c, 0xafb60028, 0xafb50024, + 0xafb40020, 0xafb3001c, 0xafb20018, 0xafb10014, 0x0e00013f, 0xafb00010, + 0x24110020, 0x24150030, 0x2794000c, 0x27930008, 0x3c124000, 0x3c1e0800, + 0x3c170800, 0x3c160800, 0x8f820004, 0x3c040800, 0x8c830020, 0x10430004, + 0x00000000, 0xaf830004, 0x0e00110b, 0x00000000, 0x8f500000, 0x32020007, + 0x1040fff5, 0x32020001, 0x1040002b, 0x32020002, 0x8f420100, 0xaf420020, + 0x8f430104, 0xaf4300a8, 0x9342010b, 0x93630000, 0x306300ff, 0x10710005, + 0x304400ff, 0x10750006, 0x2c820016, 0x0a000227, 0x00000000, 0xaf940000, + 0x0a000228, 0x2c820016, 0xaf930000, 0x0a000228, 0x00000000, 0xaf800000, + 0x14400005, 0x00041880, 0x0e0002b2, 0x00000000, 0x0a000234, 0x00000000, + 0x3c020800, 0x24424600, 0x00621821, 0x8c620000, 0x0040f809, 0x00000000, + 0x10400005, 0x8fc20034, 0x8f420104, 0x3c016020, 0xac220014, 0x8fc20034, + 0xaf520138, 0x24420001, 0xafc20034, 0x32020002, 0x10400019, 0x32020004, + 0x8f420140, 0xaf420020, 0x93630000, 0x306300ff, 0x10710005, 0x00000000, + 0x10750006, 0x00000000, 0x0a000250, 0x00000000, 0xaf940000, 0x0a000251, + 0x00000000, 0xaf930000, 0x0a000251, 0x00000000, 0xaf800000, 0x0e0008b9, + 0x00000000, 0x8ee20038, 0xaf520178, 0x24420001, 0xaee20038, 0x32020004, + 0x1040ffad, 0x00000000, 0x8f420180, 0xaf420020, 0x93630000, 0x306300ff, + 0x10710005, 0x00000000, 0x10750006, 0x00000000, 0x0a00026a, 0x00000000, + 0xaf940000, 0x0a00026b, 0x00000000, 0xaf930000, 0x0a00026b, 0x00000000, + 0xaf800000, 0x93620000, 0x14510004, 0x8ec2003c, 0x0e000835, 0x00000000, + 0x8ec2003c, 0xaf5201b8, 0x24420001, 0x0a000206, 0xaec2003c, 0x27bdffe8, + 0xafbf0010, 0x97420108, 0x24033000, 0x30447000, 0x10830012, 0x28823001, + 0x10400007, 0x24024000, 0x1080000b, 0x24022000, 0x1082001a, 0x24020001, + 0x0a000299, 0x00000000, 0x1082000c, 0x24025000, 0x1082000e, 0x00000000, + 0x0a000299, 0x00000000, 0x0000000d, 0x0a00029b, 0x00001021, 0x0e000300, + 0x00000000, 0x0a00029b, 0x00001021, 0x0e00048f, 0x00000000, 0x0a00029b, + 0x00001021, 0x0e000fdf, 0x00000000, 0x0a00029b, 0x00001021, 0x0000000d, + 0x00001021, 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x93620000, 0x24030020, + 0x304400ff, 0x10830005, 0x24020030, 0x10820007, 0x00000000, 0x0a0002af, + 0x00000000, 0x2782000c, 0xaf820000, 0x03e00008, 0x00000000, 0x27820008, + 0xaf820000, 0x03e00008, 0x00000000, 0xaf800000, 0x03e00008, 0x00000000, + 0x0000000d, 0x03e00008, 0x00001021, 0x03e00008, 0x00001021, 0x27440100, + 0x94830008, 0x30620004, 0x10400017, 0x30620002, 0x8f4202b8, 0x04430007, + 0x8c820020, 0x3c040800, 0x8c830060, 0x24020001, 0x24630001, 0x03e00008, + 0xac830060, 0xaf420280, 0x94830016, 0x3c060800, 0xa7430284, 0x8c850004, + 0x8cc4005c, 0x00001021, 0x3c031000, 0x24840001, 0xaf450288, 0xaf4302b8, + 0x03e00008, 0xacc4005c, 0x14400003, 0x3c040800, 0x03e00008, 0x00001021, + 0x8c830084, 0x24020001, 0x24630001, 0x03e00008, 0xac830084, 0x27450100, + 0x3c040800, 0x8c820088, 0x94a3000c, 0x24420001, 0x007a1821, 0xac820088, + 0x8ca40018, 0x90664000, 0xaf440038, 0x8ca2001c, 0x2403fff8, 0x00063600, + 0x00431024, 0x34420004, 0x3c030005, 0xaf42003c, 0xaf430030, 0x00000000, + 0x00000000, 0x00000000, 0xaf460404, 0x00000000, 0x00000000, 0x00000000, + 0x3c020006, 0x34420001, 0xaf420030, 0x00000000, 0x00000000, 0x00000000, + 0x8f420000, 0x30420010, 0x1040fffd, 0x00001021, 0x03e00008, 0x00000000, + 0x3c020800, 0x8c430020, 0x27bdffe8, 0xafb00010, 0x27500100, 0x1060001e, + 0xafbf0014, 0x0e001006, 0x00000000, 0x8f830018, 0x8e020018, 0xac620000, + 0x8f840018, 0x9602000c, 0xac820004, 0x8f830018, 0xac600008, 0x8f820018, + 0xac40000c, 0x8f830018, 0xac600010, 0x8f820018, 0xac400014, 0x8f840018, + 0x3c026000, 0x8c434448, 0xac830018, 0x96020008, 0x3c030800, 0x9464466e, + 0x8f850018, 0x00021400, 0x00441025, 0x24040001, 0x0e001044, 0xaca2001c, + 0x8fbf0014, 0x8fb00010, 0x03e00008, 0x27bd0018, 0x27bdffc8, 0xafb3001c, + 0x00009821, 0xafb7002c, 0x0000b821, 0xafbe0030, 0x0000f021, 0xafb50024, + 0x27550100, 0xafbf0034, 0xafb60028, 0xafb40020, 0xafb20018, 0xafb10014, + 0xafb00010, 0x96a20008, 0x8f540100, 0x8eb20018, 0x30420001, 0x10400037, + 0x02a0b021, 0x8f630054, 0x2642ffff, 0x00431023, 0x18400006, 0x00000000, + 0x0000000d, 0x00000000, 0x24000128, 0x0a000372, 0x00002021, 0x8f62004c, + 0x02421023, 0x18400028, 0x00002021, 0x93650120, 0x93640121, 0x3c030800, + 0x8c62008c, 0x308400ff, 0x24420001, 0x30a500ff, 0x00803821, 0x1485000b, + 0xac62008c, 0x3c040800, 0x8c830090, 0x24630001, 0xac830090, 0x93620122, + 0x30420001, 0x00021023, 0x30420005, 0x0a000372, 0x34440004, 0x27660100, + 0x00041080, 0x00c21021, 0x8c430000, 0x02431823, 0x04600004, 0x24820001, + 0x30440007, 0x1485fff9, 0x00041080, 0x10870007, 0x3c030800, 0xa3640121, + 0x8c620094, 0x24040005, 0x24420001, 0x0a000372, 0xac620094, 0x24040004, + 0x00809821, 0x9362003f, 0x304400ff, 0x38830016, 0x2c630001, 0x38820010, + 0x2c420001, 0x00621825, 0x1460000c, 0x24020001, 0x38830008, 0x2c630001, + 0x38820014, 0x2c420001, 0x00621825, 0x14600005, 0x24020001, 0x24020012, + 0x14820002, 0x00001021, 0x24020001, 0x50400007, 0x8eb10020, 0x8ea20020, + 0x8f630040, 0x00408821, 0x00431023, 0x5c400001, 0x8f710040, 0x9343010b, + 0x24020004, 0x54620005, 0x36730080, 0x96a20008, 0x36730002, 0x24170001, + 0x305e0020, 0x2402fffb, 0x02628024, 0x1200002a, 0x3c030800, 0x8c620030, + 0x02021024, 0x10400026, 0x3c020800, 0x8c430020, 0x10600024, 0x32620004, + 0x0e001006, 0x00000000, 0x8f830018, 0x8f420100, 0xac620000, 0x8f840018, + 0x02201821, 0x32620002, 0xac900004, 0x8f840018, 0x50400001, 0x8ec30014, + 0xac830008, 0x8f830018, 0x8ec20020, 0xac62000c, 0x8f840018, 0x8f620040, + 0xac820010, 0x8f830018, 0x8ec20018, 0xac620014, 0x8f840018, 0x3c026000, + 0x8c434448, 0x3c020800, 0xac830018, 0x9443466e, 0x8f840018, 0x3c024010, + 0x00621825, 0xac83001c, 0x0e001044, 0x24040001, 0x32620004, 0x10400076, + 0x00003821, 0x3c029000, 0x34420001, 0x3c038000, 0x02821025, 0xa360007c, + 0xaf420020, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x93620023, + 0x30420080, 0x10400011, 0x00000000, 0x8f65005c, 0x8f63004c, 0x9764003c, + 0x8f620064, 0x00a32823, 0x00852821, 0x00a2102b, 0x54400006, 0x3c023fff, + 0x93620023, 0x3042007f, 0xa3620023, 0xaf720064, 0x3c023fff, 0x0a0003f1, + 0x3442ffff, 0x8f62005c, 0x02421023, 0x04400011, 0x00000000, 0x8f65005c, + 0x8f630064, 0x9764003c, 0x3c023fff, 0x3442ffff, 0xaf720064, 0x00a32823, + 0x00852821, 0x0045102b, 0x10400004, 0x02451021, 0x3c053fff, 0x34a5ffff, + 0x02451021, 0xaf62005c, 0x24070001, 0xaf72004c, 0x8f620054, 0x16420005, + 0x00000000, 0x93620023, 0x30420040, 0x10400017, 0x24020001, 0x9762006a, + 0x00022880, 0x50a00001, 0x24050001, 0x97630068, 0x93640081, 0x3c020800, + 0x8c46004c, 0x00652821, 0x00852804, 0x00c5102b, 0x54400001, 0x00a03021, + 0x3c020800, 0x8c440050, 0x00c4182b, 0x54600001, 0x00c02021, 0x8f420074, + 0x2403fffe, 0x00832824, 0x00a21021, 0xaf62000c, 0x3c028000, 0x34420001, + 0x02821025, 0xa3600081, 0xaf420020, 0x9363007e, 0x9362007a, 0x10620004, + 0x00000000, 0x0e000f2a, 0x00000000, 0x00403821, 0x10e00017, 0x3c029000, + 0x34420001, 0x02821025, 0xaf420020, 0x3c038000, 0x8f420020, 0x00431024, + 0x1440fffd, 0x3c028000, 0x9363007d, 0x34420001, 0x3c048000, 0x02821025, + 0xa363007d, 0xaf420020, 0x8f4201f8, 0x00441024, 0x1440fffd, 0x24020002, + 0x3c031000, 0xaf5401c0, 0xa34201c4, 0xaf4301f8, 0x8ea30014, 0x8f620040, + 0x14430003, 0x00431023, 0x0a000443, 0x00001021, 0x28420001, 0x10400034, + 0x00000000, 0x8f620040, 0xaf630040, 0x9362003e, 0x30420001, 0x1440000b, + 0x3c029000, 0x93620022, 0x24420001, 0xa3620022, 0x93630022, 0x3c020800, + 0x8c440098, 0x0064182b, 0x1460001e, 0x3c020800, 0x3c029000, 0x34420001, + 0x02821025, 0xaf420020, 0x3c038000, 0x8f420020, 0x00431024, 0x1440fffd, + 0x00000000, 0x3c038000, 0x9362007d, 0x34630001, 0x3c048000, 0x02831825, + 0x34420001, 0xa362007d, 0xaf430020, 0x8f4201f8, 0x00441024, 0x1440fffd, + 0x24020002, 0x3c031000, 0xaf5401c0, 0xa34201c4, 0x24020001, 0xaf4301f8, + 0xa7620012, 0x0a000476, 0xa3600022, 0x9743007a, 0x9444002a, 0x00641821, + 0x3063fffe, 0xa7630012, 0x0e000b68, 0x00000000, 0x12e00003, 0x00000000, + 0x0e000f27, 0x00000000, 0x53c00004, 0x96a20008, 0x0e000c10, 0x00000000, + 0x96a20008, 0x8fbf0034, 0x8fbe0030, 0x8fb7002c, 0x8fb60028, 0x8fb50024, + 0x8fb40020, 0x8fb3001c, 0x8fb20018, 0x8fb10014, 0x8fb00010, 0x00021042, + 0x30420001, 0x03e00008, 0x27bd0038, 0x27bdffe8, 0xafbf0010, 0x97420108, + 0x2403000b, 0x304400ff, 0x1083004e, 0x2882000c, 0x10400011, 0x24020006, + 0x1082003e, 0x28820007, 0x10400007, 0x28820008, 0x1080002b, 0x24020001, + 0x1082002e, 0x3c026000, 0x0a000504, 0x00000000, 0x14400061, 0x2882000a, + 0x1440002b, 0x00000000, 0x0a0004ec, 0x00000000, 0x2402001c, 0x1082004e, + 0x2882001d, 0x1040000e, 0x24020019, 0x10820041, 0x2882001a, 0x10400005, + 0x2402000e, 0x10820036, 0x00000000, 0x0a000504, 0x00000000, 0x2402001b, + 0x1082003c, 0x00000000, 0x0a000504, 0x00000000, 0x240200c1, 0x10820040, + 0x288200c2, 0x10400005, 0x24020080, 0x1082001f, 0x00000000, 0x0a000504, + 0x00000000, 0x240200c2, 0x1082003b, 0x00000000, 0x0a000504, 0x00000000, + 0x3c026000, 0x0e000c7d, 0xac400808, 0x0a000506, 0x8fbf0010, 0x8c444448, + 0x3c030800, 0xac640064, 0x0e000c7d, 0x00000000, 0x3c026000, 0x8c444448, + 0x3c030800, 0x0a000505, 0xac640068, 0x8f440100, 0x0e000508, 0x00000000, + 0x3c026000, 0x8c444448, 0x3c030800, 0x0a000505, 0xac64006c, 0x0e000cab, + 0x00000000, 0x0a000506, 0x8fbf0010, 0x8f440100, 0x0e000cd5, 0x00000000, + 0x0a000506, 0x8fbf0010, 0x0e000d1c, 0x00000000, 0x0a000506, 0x8fbf0010, + 0x0000000d, 0x0a000506, 0x8fbf0010, 0x0e0005d7, 0x00000000, 0x0a000506, + 0x8fbf0010, 0x8f440100, 0x0e000d7e, 0x00000000, 0x0a000506, 0x8fbf0010, + 0x0e000e95, 0x00000000, 0x0a000506, 0x8fbf0010, 0x0e000626, 0x00000000, + 0x0a000506, 0x8fbf0010, 0x0e000b68, 0x00000000, 0x0a000506, 0x8fbf0010, + 0x0000000d, 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x27bdffe8, 0x3c029000, + 0x34420001, 0xafb00010, 0x00808021, 0x02021025, 0x3c038000, 0xafbf0014, + 0xaf420020, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x93620005, + 0x34420001, 0xa3620005, 0x8f63004c, 0x8f620054, 0x10620019, 0x3c028000, + 0x9762006a, 0x00022880, 0x50a00001, 0x24050001, 0x97630068, 0x93640081, + 0x3c020800, 0x8c46004c, 0x00652821, 0x00852804, 0x00c5102b, 0x54400001, + 0x00a03021, 0x3c020800, 0x8c440050, 0x00c4182b, 0x54600001, 0x00c02021, + 0x8f420074, 0x2403fffe, 0x00832824, 0x00a21021, 0xaf62000c, 0x3c028000, + 0x34420001, 0x02021025, 0x0e000c7d, 0xaf420020, 0x3c029000, 0x34420001, + 0x3c038000, 0x02021025, 0xaf420020, 0x8f420020, 0x00431024, 0x1440fffd, + 0x3c028000, 0x9363007d, 0x34420001, 0x3c048000, 0x02021025, 0xa363007d, + 0xaf420020, 0x8f4201f8, 0x00441024, 0x1440fffd, 0x8fbf0014, 0xaf5001c0, + 0x8fb00010, 0x24020002, 0x3c031000, 0xa34201c4, 0xaf4301f8, 0x03e00008, + 0x27bd0018, 0x27bdffd8, 0xafbf0020, 0xafb3001c, 0xafb20018, 0xafb10014, + 0xafb00010, 0x93630005, 0x00809021, 0x24020030, 0x30630030, 0x14620072, + 0x00a09821, 0x3c020800, 0x8c430020, 0x1060006c, 0x00000000, 0x0e001006, + 0x00000000, 0x8f820018, 0xac520000, 0x9363003e, 0x9362003f, 0x8f840018, + 0x00031a00, 0x00431025, 0xac820004, 0x93630081, 0x93620082, 0x8f850018, + 0x00031e00, 0x00021400, 0x00621825, 0xaca30008, 0x8f840018, 0x8f620040, + 0xac82000c, 0x8f830018, 0x8f620048, 0xac620010, 0x8f840018, 0x8f62004c, + 0x3c110800, 0xac820014, 0x8f830018, 0x8f620050, 0x26304660, 0x00002021, + 0xac620018, 0x9602000e, 0x8f850018, 0x3c03c00b, 0x00431025, 0x0e001044, + 0xaca2001c, 0x8f830018, 0x8f620054, 0xac620000, 0x8f840018, 0x8f620058, + 0xac820004, 0x8f830018, 0x8f62005c, 0xac620008, 0x8f840018, 0x8f620060, + 0xac82000c, 0x8f850018, 0x8f620064, 0xaca20010, 0x97630068, 0x9762006a, + 0x8f840018, 0x00031c00, 0x00431025, 0xac820014, 0x8f830018, 0x00002021, + 0xac600018, 0x9602000e, 0x8f850018, 0x3c03c00c, 0x00431025, 0x0e001044, + 0xaca2001c, 0x8f840018, 0x8f630018, 0xac830000, 0x936200c4, 0x30420002, + 0x10400006, 0x00000000, 0x976200c8, 0x8f830018, 0x3042ffff, 0x0a0005b5, + 0xac620004, 0x8f820018, 0xac400004, 0x8f830018, 0x8f62006c, 0xac620008, + 0x8f840018, 0x8f6200dc, 0xac82000c, 0x8f830018, 0xac600010, 0x93620005, + 0x8f830018, 0x00021600, 0x00531025, 0xac620014, 0x8f850018, 0x3c026000, + 0x8c434448, 0x24040001, 0x26224660, 0xaca30018, 0x9443000e, 0x8f850018, + 0x3c02400d, 0x00621825, 0x0e001044, 0xaca3001c, 0x0e000d48, 0x02402021, + 0x8fbf0020, 0x8fb3001c, 0x8fb20018, 0x8fb10014, 0x8fb00010, 0x03e00008, + 0x27bd0028, 0x27bdffe0, 0xafb00010, 0x27500100, 0xafbf0018, 0xafb10014, + 0x9603000c, 0x240200c1, 0x5462001d, 0x8e040000, 0x3c029000, 0x8f440100, + 0x34420001, 0x3c038000, 0x00821025, 0xaf420020, 0x8f420020, 0x00431024, + 0x1440fffd, 0x00000000, 0x3c038000, 0x9362007d, 0x34630001, 0x3c058000, + 0x00831825, 0x34420004, 0xa362007d, 0xaf430020, 0x8f4201f8, 0x00451024, + 0x1440fffd, 0x24020002, 0x3c031000, 0xaf4401c0, 0xa34201c4, 0xaf4301f8, + 0x0a000622, 0x8fbf0018, 0x8f65004c, 0x24060001, 0x0e000db5, 0x2407049f, + 0x3c020800, 0x8c430020, 0x9611000c, 0x1060001d, 0x8e100000, 0x0e001006, + 0x00000000, 0x8f820018, 0xac500000, 0x8f840018, 0x00111400, 0xac820004, + 0x8f830018, 0xac600008, 0x8f820018, 0xac40000c, 0x8f830018, 0xac600010, + 0x8f840018, 0x240204a2, 0xac820014, 0x8f850018, 0x3c026000, 0x8c434448, + 0x24040001, 0x3c020800, 0xaca30018, 0x9443466e, 0x8f850018, 0x3c024019, + 0x00621825, 0x0e001044, 0xaca3001c, 0x8fbf0018, 0x8fb10014, 0x8fb00010, + 0x03e00008, 0x27bd0020, 0x27bdffb0, 0xafb1002c, 0x27510100, 0xafbf004c, + 0xafbe0048, 0xafb70044, 0xafb60040, 0xafb5003c, 0xafb40038, 0xafb30034, + 0xafb20030, 0xafb00028, 0x8e350000, 0x9634000c, 0x3c026000, 0x8c434448, + 0x0000f021, 0xaf630170, 0x8f620040, 0x8e230014, 0x0000b821, 0x00431023, + 0x044001ec, 0x0000b021, 0x32820010, 0x1040002e, 0x3c026000, 0x9363003f, + 0x9222000e, 0x10430006, 0x2402000c, 0x9223000f, 0x10620003, 0x24020014, + 0x14620025, 0x3c026000, 0x32820004, 0x10400007, 0x241e0001, 0x8f620050, + 0x24420001, 0xaf620050, 0x8f630054, 0x24630001, 0xaf630054, 0x32830102, + 0x24020002, 0x5462000d, 0x9222000f, 0x8f620040, 0x24420001, 0xaf620040, + 0x8f630048, 0x8f620040, 0x24630001, 0x54620005, 0x9222000f, 0x8f620048, + 0x24420001, 0xaf620048, 0x9222000f, 0xa362003f, 0x9223000f, 0x24020012, + 0x14620007, 0x3c026000, 0x3c030800, 0x8c620074, 0x24420001, 0x0e000f6e, + 0xac620074, 0x3c026000, 0x8c434448, 0x32820040, 0xaf630174, 0x32830020, + 0xafa30010, 0x32830080, 0xafa30014, 0x32830001, 0xafa3001c, 0x32830008, + 0xafa30020, 0x32830100, 0x104000bb, 0xafa30018, 0x8e260010, 0x8f630054, + 0x24c2ffff, 0x00431023, 0x18400006, 0x00000000, 0x0000000d, 0x00000000, + 0x24000128, 0x0a0006b2, 0x00009021, 0x8f62004c, 0x00c21023, 0x18400028, + 0x00009021, 0x93650120, 0x93640121, 0x3c030800, 0x8c62008c, 0x308400ff, + 0x24420001, 0x30a500ff, 0x00804021, 0x1485000b, 0xac62008c, 0x3c040800, + 0x8c830090, 0x24630001, 0xac830090, 0x93620122, 0x30420001, 0x00021023, + 0x30420005, 0x0a0006b2, 0x34520004, 0x27670100, 0x00041080, 0x00e21021, + 0x8c430000, 0x00c31823, 0x04600004, 0x24820001, 0x30440007, 0x1485fff9, + 0x00041080, 0x10880007, 0x3c030800, 0xa3640121, 0x8c620094, 0x24120005, + 0x24420001, 0x0a0006b2, 0xac620094, 0x24120004, 0x32420001, 0x10400020, + 0x3c020800, 0x8c430020, 0x8e300000, 0x1060001c, 0x8e330010, 0x0e001006, + 0x00000000, 0x8f820018, 0xac500000, 0x8f840018, 0x24020001, 0xac820004, + 0x8f830018, 0xac600008, 0x8f820018, 0xac40000c, 0x8f830018, 0xac600010, + 0x8f820018, 0xac530014, 0x8f850018, 0x3c026000, 0x8c434448, 0x24040001, + 0x3c020800, 0xaca30018, 0x9443466e, 0x8f850018, 0x3c024010, 0x00621825, + 0x0e001044, 0xaca3001c, 0x32420004, 0x10400060, 0x00003821, 0x3c029000, + 0x8e260010, 0x34420001, 0x3c038000, 0x02a21025, 0xa360007c, 0xaf420020, + 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x93620023, 0x30420080, + 0x10400011, 0x00000000, 0x8f65005c, 0x8f63004c, 0x9764003c, 0x8f620064, + 0x00a32823, 0x00852821, 0x00a2102b, 0x54400006, 0x3c023fff, 0x93620023, + 0x3042007f, 0xa3620023, 0xaf660064, 0x3c023fff, 0x0a000702, 0x3442ffff, + 0x8f62005c, 0x00c21023, 0x04400011, 0x00000000, 0x8f65005c, 0x8f630064, + 0x9764003c, 0x3c023fff, 0x3442ffff, 0xaf660064, 0x00a32823, 0x00852821, + 0x0045102b, 0x10400004, 0x00c51021, 0x3c053fff, 0x34a5ffff, 0x00c51021, + 0xaf62005c, 0x24070001, 0xaf66004c, 0x8f620054, 0x14c20005, 0x00000000, + 0x93620023, 0x30420040, 0x10400017, 0x24020001, 0x9762006a, 0x00022880, + 0x50a00001, 0x24050001, 0x97630068, 0x93640081, 0x3c020800, 0x8c46004c, + 0x00652821, 0x00852804, 0x00c5102b, 0x54400001, 0x00a03021, 0x3c020800, + 0x8c440050, 0x00c4182b, 0x54600001, 0x00c02021, 0x8f420074, 0x2403fffe, + 0x00832824, 0x00a21021, 0xaf62000c, 0x3c028000, 0x34420001, 0x02a21025, + 0xa3600081, 0xaf420020, 0x9363007e, 0x9362007a, 0x10620005, 0x00e0b021, + 0x0e000f2a, 0x00000000, 0x00403821, 0x00e0b021, 0x8fa20010, 0x10400008, + 0x00000000, 0x8e220018, 0xaf620018, 0x8e23001c, 0xaf63001c, 0x8e220020, + 0x24160001, 0xaf620058, 0x13c00036, 0x32820004, 0x10400035, 0x8fa30014, + 0x93620023, 0x30420040, 0x10400031, 0x3c020800, 0x8c430020, 0x1060001c, + 0x8e300000, 0x0e001006, 0x00000000, 0x8f820018, 0xac500000, 0x8f830018, + 0xac600004, 0x8f820018, 0xac400008, 0x8f830018, 0xac60000c, 0x8f820018, + 0xac400010, 0x8f830018, 0x24020587, 0xac620014, 0x8f850018, 0x3c026000, + 0x8c434448, 0x24040001, 0x3c020800, 0xaca30018, 0x9443466e, 0x8f850018, + 0x3c024019, 0x00621825, 0x0e001044, 0xaca3001c, 0x3c029000, 0x34420001, + 0x02a21025, 0xaf420020, 0x3c038000, 0x8f420020, 0x00431024, 0x1440fffd, + 0x24020001, 0xaf62000c, 0x93630023, 0x3c028000, 0x34420001, 0x02a21025, + 0x306300bf, 0xa3630023, 0xaf420020, 0x8fa30014, 0x10600012, 0x8fa3001c, + 0x9362007c, 0x24420001, 0xa362007c, 0x9363007e, 0x9362007a, 0x1462000b, + 0x8fa3001c, 0x9362007c, 0x3c030800, 0x8c640024, 0x0044102b, 0x14400005, + 0x8fa3001c, 0x0e000f2a, 0x00000000, 0x02c2b025, 0x8fa3001c, 0x3062ffff, + 0x10400003, 0x32820200, 0x0a000793, 0x24170004, 0x10400003, 0x00000000, + 0x24170040, 0x24160001, 0x13c0005d, 0x32820002, 0x1040005c, 0x8fa20020, + 0x9222000a, 0x30420020, 0x10400033, 0x3c100800, 0x93620023, 0x30420040, + 0x1040002f, 0x8e020020, 0x1040001e, 0x3c029000, 0x0e001006, 0x00000000, + 0x8f820018, 0xac550000, 0x8f840018, 0x3c02008d, 0xac820004, 0x8f830018, + 0xac600008, 0x8f820018, 0xac40000c, 0x8f830018, 0xac600010, 0x8f840018, + 0x240205bf, 0xac820014, 0x8f850018, 0x3c026000, 0x8c434448, 0x24040001, + 0x3c020800, 0xaca30018, 0x9443466e, 0x8f850018, 0x3c024019, 0x00621825, + 0x0e001044, 0xaca3001c, 0x3c029000, 0x34420001, 0x02a21025, 0xaf420020, + 0x3c038000, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x93630023, + 0x3c028000, 0x34420001, 0x02a21025, 0x306300bf, 0xa3630023, 0xaf420020, + 0x8e020020, 0x10400023, 0x8fa20020, 0x0e001006, 0x00000000, 0x8f840018, + 0x8e230000, 0xac830000, 0x9222000a, 0x8f830018, 0x00021600, 0xac620004, + 0x8f840018, 0x8f620040, 0xac820008, 0x8f850018, 0x8f63004c, 0xaca3000c, + 0x9362003f, 0x8f840018, 0x304200ff, 0xac820010, 0x8f830018, 0x3c026000, + 0xac600014, 0x8f850018, 0x8c434448, 0x24040001, 0x3c020800, 0xaca30018, + 0x9443466e, 0x8f850018, 0x3c02401a, 0x00621825, 0x0e001044, 0xaca3001c, + 0x8fa20020, 0x1040000e, 0x8fa20018, 0x9222000a, 0xa3620082, 0x56e00005, + 0x36f70008, 0x8fa30018, 0x10600004, 0x00000000, 0x36f70008, 0x0a000801, + 0x24160001, 0x0e000de1, 0x02a02021, 0x8fa20018, 0x10400003, 0x00000000, + 0x36f70010, 0x24160001, 0x12c00019, 0x3c029000, 0x34420001, 0x02a21025, + 0xaf420020, 0x3c038000, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, + 0x3c038000, 0x9362007d, 0x34630001, 0x3c048000, 0x02a31825, 0x02e21025, + 0xa362007d, 0xaf430020, 0x8f4201f8, 0x00441024, 0x1440fffd, 0x24020002, + 0x3c031000, 0xaf5501c0, 0xa34201c4, 0xaf4301f8, 0x9363003f, 0x24020012, + 0x14620004, 0x3c026000, 0x0e000f6e, 0x00000000, 0x3c026000, 0x8c434448, + 0xaf630178, 0x8fbf004c, 0x8fbe0048, 0x8fb70044, 0x8fb60040, 0x8fb5003c, + 0x8fb40038, 0x8fb30034, 0x8fb20030, 0x8fb1002c, 0x8fb00028, 0x03e00008, + 0x27bd0050, 0x27bdffe8, 0xafbf0014, 0xafb00010, 0x8f500180, 0x97420184, + 0x30420200, 0x14400015, 0x00000000, 0x8f430188, 0x3c02ff00, 0x00621824, + 0x3c020200, 0x10620031, 0x0043102b, 0x14400007, 0x3c020300, 0x1060000b, + 0x3c020100, 0x1062000d, 0x00000000, 0x0a0008b4, 0x00000000, 0x10620027, + 0x3c020400, 0x1062003e, 0x02002021, 0x0a0008b4, 0x00000000, 0x0e000e1e, + 0x02002021, 0x0a0008b6, 0x8fbf0014, 0x93620005, 0x30420020, 0x1440005e, + 0x8fbf0014, 0x3c029000, 0x34420001, 0x02021025, 0xaf420020, 0x3c038000, + 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x93620005, 0x3c038000, + 0x34630001, 0x02031825, 0x34420020, 0xa3620005, 0xaf430020, 0x93620005, + 0x30420020, 0x14400003, 0x02002021, 0x0000000d, 0x02002021, 0x0e000553, + 0x24055854, 0x0a0008b6, 0x8fbf0014, 0x93620005, 0x30420001, 0x1040003f, + 0x3c029000, 0x34420001, 0x02021025, 0xaf420020, 0x3c038000, 0x8f420020, + 0x00431024, 0x1440fffd, 0x00000000, 0x93620005, 0x3c048000, 0x3c030800, + 0x304200fe, 0xa3620005, 0x8c620020, 0x34840001, 0x02042025, 0xaf440020, + 0x1040002d, 0x8fbf0014, 0x0a000894, 0x00000000, 0x00002821, 0x00003021, + 0x0e000f78, 0x240706a4, 0x3c020800, 0x8c430020, 0x10600023, 0x8fbf0014, + 0x0e001006, 0x00000000, 0x8f820018, 0xac500000, 0x93630082, 0x9362003f, + 0x8f840018, 0x00031a00, 0x00431025, 0xac820004, 0x8f830018, 0xac600008, + 0x8f820018, 0xac40000c, 0x8f830018, 0xac600010, 0x8f820018, 0xac400014, + 0x8f850018, 0x3c026000, 0x8c434448, 0x24040001, 0x3c020800, 0xaca30018, + 0x9443466e, 0x8f850018, 0x3c02400a, 0x00621825, 0x0e001044, 0xaca3001c, + 0x0a0008b6, 0x8fbf0014, 0x0000000d, 0x8fbf0014, 0x8fb00010, 0x03e00008, + 0x27bd0018, 0x27bdffe8, 0xafbf0010, 0x93420148, 0x2444ffff, 0x2c830005, + 0x10600047, 0x3c020800, 0x24424598, 0x00041880, 0x00621821, 0x8c640000, + 0x00800008, 0x00000000, 0x8f430144, 0x8f62000c, 0x14620006, 0x24020001, + 0xaf62000c, 0x0e000909, 0x00000000, 0x0a000907, 0x8fbf0010, 0x8f62000c, + 0x0a000900, 0x00000000, 0x97630010, 0x8f420144, 0x14430006, 0x24020001, + 0xa7620010, 0x0e000eeb, 0x00000000, 0x0a000907, 0x8fbf0010, 0x97620010, + 0x0a000900, 0x00000000, 0x97630012, 0x8f420144, 0x14430006, 0x24020001, + 0xa7620012, 0x0e000f06, 0x00000000, 0x0a000907, 0x8fbf0010, 0x97620012, + 0x0a000900, 0x00000000, 0x97630014, 0x8f420144, 0x14430006, 0x24020001, + 0xa7620014, 0x0e000f21, 0x00000000, 0x0a000907, 0x8fbf0010, 0x97620014, + 0x0a000900, 0x00000000, 0x97630016, 0x8f420144, 0x14430006, 0x24020001, + 0xa7620016, 0x0e000f24, 0x00000000, 0x0a000907, 0x8fbf0010, 0x97620016, + 0x14400006, 0x8fbf0010, 0x3c030800, 0x8c620070, 0x24420001, 0xac620070, + 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x27bdffe8, 0xafbf0010, 0x93620081, + 0x3c030800, 0x8c640048, 0x0044102b, 0x14400028, 0x3c029000, 0x8f460140, + 0x34420001, 0x3c038000, 0x00c21025, 0xaf420020, 0x8f420020, 0x00431024, + 0x1440fffd, 0x3c048000, 0x34840001, 0x3c059000, 0x34a50001, 0x3c078000, + 0x24020012, 0x24030080, 0x00c42025, 0x00c52825, 0xa362003f, 0xa3630082, + 0xaf440020, 0xaf450020, 0x8f420020, 0x00471024, 0x1440fffd, 0x3c038000, + 0x9362007d, 0x34630001, 0x3c048000, 0x00c31825, 0x34420020, 0xa362007d, + 0xaf430020, 0x8f4201f8, 0x00441024, 0x1440fffd, 0x24020002, 0x3c031000, + 0x0a00096d, 0xaf4601c0, 0x93620081, 0x24420001, 0x0e000f2a, 0xa3620081, + 0x9763006a, 0x00032880, 0x14a00002, 0x00403821, 0x24050001, 0x97630068, + 0x93640081, 0x3c020800, 0x8c46004c, 0x00652821, 0x00852804, 0x00c5102b, + 0x54400001, 0x00a03021, 0x3c020800, 0x8c440050, 0x00c4182b, 0x54600001, + 0x00c02021, 0x8f420074, 0x2403fffe, 0x00832824, 0x00a21021, 0xaf62000c, + 0x10e0001a, 0x3c029000, 0x8f440140, 0x34420001, 0x3c038000, 0x00821025, + 0xaf420020, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x3c038000, + 0x9362007d, 0x34630001, 0x3c058000, 0x00831825, 0x34420004, 0xa362007d, + 0xaf430020, 0x8f4201f8, 0x00451024, 0x1440fffd, 0x24020002, 0x3c031000, + 0xaf4401c0, 0xa34201c4, 0xaf4301f8, 0x8fbf0010, 0x03e00008, 0x27bd0018, + 0x27bdffd8, 0xafb3001c, 0x27530100, 0xafbf0024, 0xafb40020, 0xafb20018, + 0xafb10014, 0xafb00010, 0x96620008, 0x3c140800, 0x8f520100, 0x30420001, + 0x104000cf, 0x00000000, 0x8e700018, 0x8f630054, 0x2602ffff, 0x00431023, + 0x18400006, 0x00000000, 0x0000000d, 0x00000000, 0x24000128, 0x0a0009b6, + 0x00008821, 0x8f62004c, 0x02021023, 0x18400028, 0x00008821, 0x93650120, + 0x93640121, 0x3c030800, 0x8c62008c, 0x308400ff, 0x24420001, 0x30a500ff, + 0x00803821, 0x1485000b, 0xac62008c, 0x3c040800, 0x8c830090, 0x24630001, + 0xac830090, 0x93620122, 0x30420001, 0x00021023, 0x30420005, 0x0a0009b6, + 0x34510004, 0x27660100, 0x00041080, 0x00c21021, 0x8c430000, 0x02031823, + 0x04600004, 0x24820001, 0x30440007, 0x1485fff9, 0x00041080, 0x10870007, + 0x3c030800, 0xa3640121, 0x8c620094, 0x24110005, 0x24420001, 0x0a0009b6, + 0xac620094, 0x24110004, 0x32220001, 0x1040001e, 0x8e820020, 0x1040001d, + 0x32220004, 0x0e001006, 0x00000000, 0x8f820018, 0xac520000, 0x8f840018, + 0x24020001, 0xac820004, 0x8f830018, 0xac600008, 0x8f820018, 0xac40000c, + 0x8f830018, 0xac600010, 0x8f820018, 0xac500014, 0x8f850018, 0x3c026000, + 0x8c434448, 0x24040001, 0x3c020800, 0xaca30018, 0x9443466e, 0x8f850018, + 0x3c024010, 0x00621825, 0x0e001044, 0xaca3001c, 0x32220004, 0x10400076, + 0x00003821, 0x3c029000, 0x34420001, 0x3c038000, 0x02421025, 0xa360007c, + 0xaf420020, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x93620023, + 0x30420080, 0x10400011, 0x00000000, 0x8f65005c, 0x8f63004c, 0x9764003c, + 0x8f620064, 0x00a32823, 0x00852821, 0x00a2102b, 0x54400006, 0x3c023fff, + 0x93620023, 0x3042007f, 0xa3620023, 0xaf700064, 0x3c023fff, 0x0a000a03, + 0x3442ffff, 0x8f62005c, 0x02021023, 0x04400011, 0x00000000, 0x8f65005c, + 0x8f630064, 0x9764003c, 0x3c023fff, 0x3442ffff, 0xaf700064, 0x00a32823, + 0x00852821, 0x0045102b, 0x10400004, 0x02051021, 0x3c053fff, 0x34a5ffff, + 0x02051021, 0xaf62005c, 0x24070001, 0xaf70004c, 0x8f620054, 0x16020005, + 0x00000000, 0x93620023, 0x30420040, 0x10400017, 0x24020001, 0x9762006a, + 0x00022880, 0x50a00001, 0x24050001, 0x97630068, 0x93640081, 0x3c020800, + 0x8c46004c, 0x00652821, 0x00852804, 0x00c5102b, 0x54400001, 0x00a03021, + 0x3c020800, 0x8c440050, 0x00c4182b, 0x54600001, 0x00c02021, 0x8f420074, + 0x2403fffe, 0x00832824, 0x00a21021, 0xaf62000c, 0x3c028000, 0x34420001, + 0x02421025, 0xa3600081, 0xaf420020, 0x9363007e, 0x9362007a, 0x10620004, + 0x00000000, 0x0e000f2a, 0x00000000, 0x00403821, 0x10e00017, 0x3c029000, + 0x34420001, 0x02421025, 0xaf420020, 0x3c038000, 0x8f420020, 0x00431024, + 0x1440fffd, 0x3c028000, 0x9363007d, 0x34420001, 0x3c048000, 0x02421025, + 0xa363007d, 0xaf420020, 0x8f4201f8, 0x00441024, 0x1440fffd, 0x24020002, + 0x3c031000, 0xaf5201c0, 0xa34201c4, 0xaf4301f8, 0x9342010b, 0x8e830020, + 0x27500100, 0x38420006, 0x10600029, 0x2c510001, 0x0e001006, 0x00000000, + 0x8f830018, 0x8e020000, 0xac620000, 0x8f840018, 0x96020008, 0xac820004, + 0x8f830018, 0x8e020014, 0xac620008, 0x8f850018, 0x3c026000, 0x8c434448, + 0xaca3000c, 0x8f840018, 0x96020012, 0xac820010, 0x8f850018, 0x8e030020, + 0xaca30014, 0x9602000c, 0x9603000e, 0x8f840018, 0x00021400, 0x00431025, + 0xac820018, 0x12200005, 0x3c020800, 0x9443466e, 0x8f840018, 0x0a000a78, + 0x3c024013, 0x9443466e, 0x8f840018, 0x3c024014, 0x00621825, 0xac83001c, + 0x0e001044, 0x24040001, 0x8e630014, 0x8f620040, 0x14430003, 0x00431023, + 0x0a000a83, 0x00001021, 0x28420001, 0x10400034, 0x00000000, 0x8f620040, + 0xaf630040, 0x9362003e, 0x30420001, 0x1440000b, 0x3c029000, 0x93620022, + 0x24420001, 0xa3620022, 0x93630022, 0x3c020800, 0x8c440098, 0x0064182b, + 0x1460001e, 0x3c020800, 0x3c029000, 0x34420001, 0x02421025, 0xaf420020, + 0x3c038000, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x3c038000, + 0x9362007d, 0x34630001, 0x3c048000, 0x02431825, 0x34420001, 0xa362007d, + 0xaf430020, 0x8f4201f8, 0x00441024, 0x1440fffd, 0x24020002, 0x3c031000, + 0xaf5201c0, 0xa34201c4, 0x24020001, 0xaf4301f8, 0xa7620012, 0x0a000ab6, + 0xa3600022, 0x9743007a, 0x9444002a, 0x00641821, 0x3063fffe, 0xa7630012, + 0x0e000b68, 0x00000000, 0x97420108, 0x8fbf0024, 0x8fb40020, 0x8fb3001c, + 0x8fb20018, 0x8fb10014, 0x8fb00010, 0x00021042, 0x30420001, 0x03e00008, + 0x27bd0028, 0x27bdffe0, 0xafb20018, 0x3c120800, 0x8e420020, 0xafb00010, + 0x27500100, 0xafbf001c, 0x10400046, 0xafb10014, 0x0e001006, 0x00000000, + 0x8f840018, 0x8e020000, 0xac820000, 0x936300b1, 0x936200c5, 0x8f850018, + 0x00031e00, 0x00021400, 0x34420100, 0x00621825, 0xaca30004, 0x8f840018, + 0x8e02001c, 0xac820008, 0x8f830018, 0x8f620048, 0xac62000c, 0x8f840018, + 0x96020012, 0xac820010, 0x8f830018, 0x8f620040, 0x24040001, 0xac620014, + 0x8f850018, 0x3c026000, 0x8c434448, 0x3c020800, 0x24514660, 0xaca30018, + 0x9623000e, 0x8f850018, 0x3c024016, 0x00621825, 0x0e001044, 0xaca3001c, + 0x96030008, 0x30630010, 0x1060001c, 0x8e420020, 0x1040001a, 0x8e100000, + 0x0e001006, 0x00000000, 0x8f820018, 0xac500000, 0x8f830018, 0xac600004, + 0x8f820018, 0xac400008, 0x8f830018, 0xac60000c, 0x8f820018, 0xac400010, + 0x8f830018, 0xac600014, 0x8f850018, 0x3c036000, 0x8c634448, 0x24040001, + 0xaca30018, 0x9622000e, 0x8f850018, 0x3c034015, 0x00431025, 0x0e001044, + 0xaca2001c, 0x00001021, 0x8fbf001c, 0x8fb20018, 0x8fb10014, 0x8fb00010, + 0x03e00008, 0x27bd0020, 0x27bdffe0, 0xafb20018, 0x3c120800, 0x8e420020, + 0xafb00010, 0x27500100, 0xafbf001c, 0x10400041, 0xafb10014, 0x0e001006, + 0x00000000, 0x8f830018, 0x8e020000, 0xac620000, 0x8f840018, 0x24020100, + 0xac820004, 0x8f830018, 0x8e02001c, 0xac620008, 0x8f840018, 0x8e020018, + 0xac82000c, 0x8f830018, 0x96020012, 0xac620010, 0x8f840018, 0x96020008, + 0xac820014, 0x8f850018, 0x3c026000, 0x8c434448, 0x24040001, 0x3c020800, + 0x24514660, 0xaca30018, 0x9623000e, 0x8f850018, 0x3c024017, 0x00621825, + 0x0e001044, 0xaca3001c, 0x96030008, 0x30630010, 0x1060001c, 0x8e420020, + 0x1040001a, 0x8e100000, 0x0e001006, 0x00000000, 0x8f820018, 0xac500000, + 0x8f830018, 0xac600004, 0x8f820018, 0xac400008, 0x8f830018, 0xac60000c, + 0x8f820018, 0xac400010, 0x8f830018, 0xac600014, 0x8f850018, 0x3c036000, + 0x8c634448, 0x24040001, 0xaca30018, 0x9622000e, 0x8f850018, 0x3c034015, + 0x00431025, 0x0e001044, 0xaca2001c, 0x00001021, 0x8fbf001c, 0x8fb20018, + 0x8fb10014, 0x8fb00010, 0x03e00008, 0x27bd0020, 0x27bdffe8, 0xafbf0010, + 0x936200c4, 0x30420002, 0x10400019, 0x00000000, 0x936200c5, 0x936300b1, + 0x00431023, 0x304400ff, 0x30830080, 0x10600004, 0x00000000, 0x0000000d, + 0x00000000, 0x24000a6a, 0x93620004, 0x00441023, 0x304400ff, 0x30830080, + 0x10600004, 0x2482ffff, 0x8f650024, 0x0a000b82, 0x00000000, 0x00022b00, + 0x8f620024, 0x0045102b, 0x10400002, 0x00000000, 0x8f650024, 0x8f620048, + 0x8f630040, 0x00431823, 0x0065202b, 0x10800004, 0x00000000, 0x8f620040, + 0x00451021, 0xaf620048, 0x9762003c, 0x0062102b, 0x10400041, 0x8fbf0010, + 0x10a0003f, 0x3c029000, 0x34420001, 0x3c040800, 0x8c830080, 0x8f450100, + 0x3c068000, 0x24630001, 0x00a21025, 0xac830080, 0xaf420020, 0x8f420020, + 0x00461024, 0x1440fffd, 0x3c038000, 0x9362007d, 0x34630001, 0x3c048000, + 0x00a31825, 0x34420004, 0xa362007d, 0xaf430020, 0x8f4201f8, 0x00441024, + 0x1440fffd, 0x24020002, 0x3c030800, 0xaf4501c0, 0xa34201c4, 0x8c640020, + 0x3c021000, 0xaf4201f8, 0x1080001f, 0x8fbf0010, 0x0e001006, 0x00000000, + 0x8f830018, 0x8f420100, 0xac620000, 0x8f840018, 0x8f620040, 0xac820004, + 0x8f850018, 0x8f620048, 0xaca20008, 0x8f830018, 0xac60000c, 0x8f820018, + 0xac400010, 0x8f830018, 0x3c026000, 0xac600014, 0x8f840018, 0x8c434448, + 0x3c020800, 0xac830018, 0x9443466e, 0x8f840018, 0x3c0240c2, 0x00621825, + 0xac83001c, 0x0e001044, 0x24040001, 0x8fbf0010, 0x03e00008, 0x27bd0018, + 0x3c020800, 0x24423958, 0xaf82000c, 0x03e00008, 0x00000000, 0x27bdffe8, + 0xafb00010, 0x27500100, 0xafbf0014, 0x8e02001c, 0x14400003, 0x3c020800, + 0x0000000d, 0x3c020800, 0x8c430020, 0x10600026, 0x00001021, 0x0e001006, + 0x00000000, 0x8f830018, 0x8e020000, 0xac620000, 0x8f840018, 0x8e02001c, + 0xac820004, 0x8f830018, 0xac600008, 0x8f840018, 0x8e020018, 0xac82000c, + 0x8f850018, 0x96020012, 0xaca20010, 0x8f830018, 0x3c106000, 0xac600014, + 0x8f840018, 0x8e024448, 0x3c030800, 0xac820018, 0x9462466e, 0x8f840018, + 0x3c034012, 0x00431025, 0xac82001c, 0x0e001044, 0x24040001, 0x8e036800, + 0x00001021, 0x3c040001, 0x00641825, 0xae036800, 0x0a000c0d, 0x8fbf0014, + 0x8fbf0014, 0x8fb00010, 0x03e00008, 0x27bd0018, 0x3c020800, 0x97430078, + 0x9444002e, 0x00001021, 0x00641821, 0x3063fffe, 0x03e00008, 0xa7630010, + 0x27450100, 0x8f640048, 0x8ca30018, 0x00641023, 0x18400021, 0x00000000, + 0xaf630048, 0x8f620040, 0x9763003c, 0x00821023, 0x0043102a, 0x1040001a, + 0x3c029000, 0x8ca40000, 0x34420001, 0x3c038000, 0x00821025, 0xaf420020, + 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x3c038000, 0x9362007d, + 0x34630001, 0x3c058000, 0x00831825, 0x34420004, 0xa362007d, 0xaf430020, + 0x8f4201f8, 0x00451024, 0x1440fffd, 0x24020002, 0x3c031000, 0xaf4401c0, + 0xa34201c4, 0xaf4301f8, 0x03e00008, 0x00001021, 0x8f420100, 0x34420001, + 0xaf4200a4, 0x03e00008, 0x00001021, 0x27bdffe0, 0xafbf0018, 0xafb10014, + 0xafb00010, 0x9362007e, 0x30d000ff, 0x16020029, 0x00808821, 0x93620080, + 0x16020026, 0x00000000, 0x9362007f, 0x16020023, 0x00000000, 0x9362007a, + 0x16020004, 0x00000000, 0x0000000d, 0x00000000, 0x24000771, 0x0e000f49, + 0x00000000, 0x3c039000, 0x34630001, 0x3c048000, 0x02231825, 0xa370007a, + 0xaf430020, 0x8f420020, 0x00441024, 0x1440fffd, 0x3c028000, 0x9363007d, + 0x34420001, 0x3c048000, 0x02221025, 0xa363007d, 0xaf420020, 0x8f4201f8, + 0x00441024, 0x1440fffd, 0x24020002, 0x3c031000, 0xaf5101c0, 0xa34201c4, + 0xaf4301f8, 0x0a000c79, 0x8fbf0018, 0x0000000d, 0x00000000, 0x24000781, + 0x8fbf0018, 0x8fb10014, 0x8fb00010, 0x03e00008, 0x27bd0020, 0x3c020800, + 0x8c430020, 0x27bdffe8, 0xafb00010, 0x27500100, 0x10600024, 0xafbf0014, + 0x0e001006, 0x00000000, 0x8f830018, 0x8e020000, 0xac620000, 0x8f840018, + 0x8e020004, 0xac820004, 0x8f830018, 0x8e020018, 0xac620008, 0x8f840018, + 0x8e03001c, 0xac83000c, 0x9602000c, 0x9203000a, 0x8f840018, 0x00021400, + 0x00431025, 0xac820010, 0x8f830018, 0x3c026000, 0xac600014, 0x8f840018, + 0x8c434448, 0xac830018, 0x96020008, 0x3c030800, 0x9464466e, 0x8f850018, + 0x00021400, 0x00441025, 0x24040001, 0x0e001044, 0xaca2001c, 0x8fbf0014, + 0x8fb00010, 0x03e00008, 0x27bd0018, 0x3c020800, 0x8c430020, 0x27bdffe8, + 0xafb00010, 0x27500100, 0x10600020, 0xafbf0014, 0x0e001006, 0x00000000, + 0x8f820018, 0xac400000, 0x8f830018, 0xac600004, 0x8f820018, 0xac400008, + 0x8f830018, 0xac60000c, 0x9602000c, 0x9603000e, 0x8f840018, 0x00021400, + 0x00431025, 0xac820010, 0x8f830018, 0x3c026000, 0xac600014, 0x8f840018, + 0x8c434448, 0xac830018, 0x96020008, 0x3c030800, 0x9464466e, 0x8f850018, + 0x00021400, 0x00441025, 0x24040001, 0x0e001044, 0xaca2001c, 0x8fbf0014, + 0x8fb00010, 0x03e00008, 0x27bd0018, 0x27bdffe8, 0xafb00010, 0x27500100, + 0xafbf0014, 0x9602000c, 0x10400024, 0x00802821, 0x3c020800, 0x8c430020, + 0x1060003a, 0x8fbf0014, 0x0e001006, 0x00000000, 0x8f840018, 0x8e030000, + 0xac830000, 0x9602000c, 0x8f840018, 0x00021400, 0xac820004, 0x8f830018, + 0xac600008, 0x8f820018, 0xac40000c, 0x8f830018, 0xac600010, 0x8f820018, + 0xac400014, 0x8f850018, 0x3c026000, 0x8c434448, 0x24040001, 0x3c020800, + 0xaca30018, 0x9443466e, 0x8f850018, 0x3c02400b, 0x00621825, 0x0e001044, + 0xaca3001c, 0x0a000d19, 0x8fbf0014, 0x93620005, 0x30420010, 0x14400015, + 0x3c029000, 0x34420001, 0x00a21025, 0xaf420020, 0x3c038000, 0x8f420020, + 0x00431024, 0x1440fffd, 0x00000000, 0x3c038000, 0x93620005, 0x34630001, + 0x00a02021, 0x00a31825, 0x24055852, 0x34420010, 0xa3620005, 0x0e000553, + 0xaf430020, 0x0a000d19, 0x8fbf0014, 0x0000000d, 0x8fbf0014, 0x8fb00010, + 0x03e00008, 0x27bd0018, 0x3c020800, 0x8c430020, 0x27bdffe8, 0xafb00010, + 0x27500100, 0x10600022, 0xafbf0014, 0x0e001006, 0x00000000, 0x8f840018, + 0x8e020004, 0xac820000, 0x9603000c, 0x9762002c, 0x8f840018, 0x00031c00, + 0x00431025, 0xac820004, 0x8f830018, 0xac600008, 0x8f820018, 0xac40000c, + 0x8f830018, 0xac600010, 0x8f820018, 0xac400014, 0x8f850018, 0x3c026000, + 0x8c434448, 0x24040001, 0x3c020800, 0xaca30018, 0x9443466e, 0x8f850018, + 0x3c02400e, 0x00621825, 0x0e001044, 0xaca3001c, 0x0e000d48, 0x8e040000, + 0x8fbf0014, 0x8fb00010, 0x03e00008, 0x27bd0018, 0x3c038000, 0x8f420278, + 0x00431024, 0x1440fffd, 0x24020002, 0x3c031000, 0xaf440240, 0xa3420244, + 0x03e00008, 0xaf430278, 0x3c020800, 0x8c430020, 0x27bdffe0, 0xafb10014, + 0x00808821, 0xafb20018, 0x00c09021, 0xafb00010, 0x30b0ffff, 0x1060001c, + 0xafbf001c, 0x0e001006, 0x00000000, 0x8f820018, 0xac510000, 0x8f840018, + 0x00101400, 0xac820004, 0x8f830018, 0xac600008, 0x8f820018, 0xac40000c, + 0x8f830018, 0xac600010, 0x8f820018, 0xac520014, 0x8f840018, 0x3c026000, + 0x8c434448, 0x3c020800, 0xac830018, 0x9443466e, 0x8f840018, 0x3c024019, + 0x00621825, 0xac83001c, 0x0e001044, 0x24040001, 0x8fbf001c, 0x8fb20018, + 0x8fb10014, 0x8fb00010, 0x03e00008, 0x27bd0020, 0x27bdffe8, 0x27450100, + 0xafbf0010, 0x94a3000c, 0x240200c1, 0x14620029, 0x00803021, 0x3c029000, + 0x34420001, 0x00c21025, 0xaf420020, 0x3c038000, 0x8f420020, 0x00431024, + 0x1440fffd, 0x3c028000, 0x34420001, 0x3c049000, 0x34840001, 0x3c058000, + 0x24030012, 0x00c21025, 0x00c42025, 0xa363003f, 0xaf420020, 0xaf440020, + 0x8f420020, 0x00451024, 0x1440fffd, 0x3c038000, 0x9362007d, 0x34630001, + 0x3c048000, 0x00c31825, 0x34420020, 0xa362007d, 0xaf430020, 0x8f4201f8, + 0x00441024, 0x1440fffd, 0x24020002, 0x3c031000, 0xaf4601c0, 0xa34201c4, + 0xaf4301f8, 0x0a000db3, 0x8fbf0010, 0x00c02021, 0x94a5000c, 0x24060001, + 0x0e000f78, 0x240706d8, 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x3c020800, + 0x8c430020, 0x27bdffe0, 0xafb00010, 0x00808021, 0xafb20018, 0x00a09021, + 0xafb10014, 0x30d100ff, 0x1060001c, 0xafbf001c, 0x0e001006, 0x00000000, + 0x8f820018, 0xac500000, 0x8f840018, 0x24020001, 0xac820004, 0x8f830018, + 0xac600008, 0x8f820018, 0xac40000c, 0x8f830018, 0xac600010, 0x8f820018, + 0xac520014, 0x8f840018, 0x3c026000, 0x8c434448, 0x3c020800, 0xac830018, + 0x9443466e, 0x8f840018, 0x3c024010, 0x00621825, 0xac83001c, 0x0e001044, + 0x02202021, 0x8fbf001c, 0x8fb20018, 0x8fb10014, 0x8fb00010, 0x03e00008, + 0x27bd0020, 0x27bdffe8, 0xafbf0014, 0xafb00010, 0x93620005, 0x30420001, + 0x10400033, 0x00808021, 0x3c029000, 0x34420001, 0x02021025, 0xaf420020, + 0x3c038000, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x93620005, + 0x3c048000, 0x3c030800, 0x304200fe, 0xa3620005, 0x8c620020, 0x34840001, + 0x02042025, 0xaf440020, 0x10400020, 0x8fbf0014, 0x0e001006, 0x00000000, + 0x8f820018, 0xac500000, 0x93630082, 0x9362003f, 0x8f840018, 0x00031a00, + 0x00431025, 0xac820004, 0x8f830018, 0xac600008, 0x8f820018, 0xac40000c, + 0x8f830018, 0xac600010, 0x8f820018, 0xac400014, 0x8f840018, 0x3c026000, + 0x8c434448, 0x3c020800, 0xac830018, 0x9443466e, 0x8f840018, 0x3c02400a, + 0x00621825, 0xac83001c, 0x0e001044, 0x24040001, 0x8fbf0014, 0x8fb00010, + 0x03e00008, 0x27bd0018, 0x27bdffe8, 0xafbf0010, 0x8f420188, 0x00803021, + 0x9364003f, 0x24030012, 0x00021402, 0x1483001c, 0x304500ff, 0x3c029000, + 0x34420001, 0x3c038000, 0x00c21025, 0xa3650080, 0xa365007a, 0xaf420020, + 0x8f420020, 0x00431024, 0x1440fffd, 0x3c028000, 0x9363007d, 0x34420001, + 0x3c048000, 0x00c21025, 0xa363007d, 0xaf420020, 0x8f4201f8, 0x00441024, + 0x1440fffd, 0x24020002, 0x3c031000, 0xaf4601c0, 0xa34201c4, 0xaf4301f8, + 0x0a000e54, 0x8fbf0010, 0x9362007e, 0x1445000e, 0x00000000, 0x93620080, + 0x1045000b, 0x00000000, 0xa3650080, 0x8f820000, 0x93660080, 0x8f440180, + 0x8f65004c, 0x8c430000, 0x0060f809, 0x00000000, 0x0a000e54, 0x8fbf0010, + 0xa3650080, 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x3c020800, 0x8c430020, + 0x27bdffe0, 0xafb10014, 0x00808821, 0xafb20018, 0x00a09021, 0xafb00010, + 0x30d000ff, 0x1060002f, 0xafbf001c, 0x0e001006, 0x00000000, 0x8f820018, + 0xac510000, 0x8f830018, 0xac700004, 0x8f820018, 0xac520008, 0x8f830018, + 0xac60000c, 0x8f820018, 0xac400010, 0x9763006a, 0x00032880, 0x50a00001, + 0x24050001, 0x97630068, 0x93640081, 0x3c020800, 0x8c46004c, 0x00652821, + 0x00852804, 0x00c5102b, 0x54400001, 0x00a03021, 0x3c020800, 0x8c440050, + 0x00c4182b, 0x54600001, 0x00c02021, 0x8f830018, 0x2402fffe, 0x00822824, + 0x3c026000, 0xac650014, 0x8f840018, 0x8c434448, 0x3c020800, 0xac830018, + 0x9443466e, 0x8f840018, 0x3c024011, 0x00621825, 0xac83001c, 0x0e001044, + 0x24040001, 0x8fbf001c, 0x8fb20018, 0x8fb10014, 0x8fb00010, 0x03e00008, + 0x27bd0020, 0x27bdffe8, 0xafbf0014, 0xafb00010, 0x8f440100, 0x27500100, + 0x8f650050, 0x0e000c45, 0x9206001b, 0x3c020800, 0x8c430020, 0x1060001d, + 0x8e100018, 0x0e001006, 0x00000000, 0x8f840018, 0x8f420100, 0xac820000, + 0x8f830018, 0xac700004, 0x8f840018, 0x8f620050, 0xac820008, 0x8f830018, + 0xac60000c, 0x8f820018, 0xac400010, 0x8f830018, 0x3c026000, 0xac600014, + 0x8f850018, 0x8c434448, 0x24040001, 0x3c020800, 0xaca30018, 0x9443466e, + 0x8f850018, 0x3c02401c, 0x00621825, 0x0e001044, 0xaca3001c, 0x8fbf0014, + 0x8fb00010, 0x03e00008, 0x27bd0018, 0x3c029000, 0x8f460140, 0x34420001, + 0x3c038000, 0x00c21025, 0xaf420020, 0x8f420020, 0x00431024, 0x1440fffd, + 0x3c048000, 0x34840001, 0x3c059000, 0x34a50001, 0x3c078000, 0x24020012, + 0x24030080, 0x00c42025, 0x00c52825, 0xa362003f, 0xa3630082, 0xaf440020, + 0xaf450020, 0x8f420020, 0x00471024, 0x1440fffd, 0x3c038000, 0x9362007d, + 0x34630001, 0x3c048000, 0x00c31825, 0x34420020, 0xa362007d, 0xaf430020, + 0x8f4201f8, 0x00441024, 0x1440fffd, 0x24020002, 0x3c031000, 0xaf4601c0, + 0xa34201c4, 0x03e00008, 0xaf4301f8, 0x8f430238, 0x3c020800, 0x04610013, + 0x8c44009c, 0x2406fffe, 0x3c050800, 0x3c038000, 0x2484ffff, 0x14800009, + 0x00000000, 0x97420078, 0x8ca3007c, 0x24420001, 0x00461024, 0x24630001, + 0xa7620010, 0x03e00008, 0xaca3007c, 0x8f420238, 0x00431024, 0x1440fff3, + 0x2484ffff, 0x8f420140, 0x3c031000, 0xaf420200, 0x03e00008, 0xaf430238, + 0x3c029000, 0x8f440140, 0x34420001, 0x3c038000, 0x00821025, 0xaf420020, + 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x3c038000, 0x9362007d, + 0x34630001, 0x3c058000, 0x00831825, 0x34420001, 0xa362007d, 0xaf430020, + 0x8f4201f8, 0x00451024, 0x1440fffd, 0x24020002, 0x3c031000, 0xaf4401c0, + 0xa34201c4, 0x03e00008, 0xaf4301f8, 0x0000000d, 0x03e00008, 0x00000000, + 0x0000000d, 0x03e00008, 0x00000000, 0x24020001, 0x03e00008, 0xa7620010, + 0x9362003f, 0x304400ff, 0x3883000e, 0x2c630001, 0x38820010, 0x2c420001, + 0x00621825, 0x14600003, 0x24020012, 0x14820003, 0x00000000, 0x03e00008, + 0x00001021, 0x9363007e, 0x9362007a, 0x14620006, 0x00000000, 0x9363007e, + 0x24020001, 0x24630001, 0x03e00008, 0xa363007e, 0x9363007e, 0x93620080, + 0x14620004, 0x24020001, 0xa362000b, 0x03e00008, 0x24020001, 0x03e00008, + 0x00001021, 0x9362000b, 0x10400021, 0x00001021, 0xa360000b, 0x9362003f, + 0x304400ff, 0x3883000e, 0x2c630001, 0x38820010, 0x2c420001, 0x00621825, + 0x14600015, 0x00001821, 0x24020012, 0x10820012, 0x00000000, 0x9363007e, + 0x9362007a, 0x14620007, 0x00000000, 0x9362007e, 0x24030001, 0x24420001, + 0xa362007e, 0x03e00008, 0x00601021, 0x9363007e, 0x93620080, 0x14620004, + 0x00001821, 0x24020001, 0xa362000b, 0x24030001, 0x03e00008, 0x00601021, + 0x03e00008, 0x00000000, 0x24040001, 0xaf64000c, 0x8f6300dc, 0x8f6200cc, + 0x50620001, 0xa7640010, 0xa7640012, 0xa7640014, 0x03e00008, 0xa7640016, + 0x27bdffd8, 0xafb00010, 0x00808021, 0xafb3001c, 0x00c09821, 0xafbf0020, + 0xafb20018, 0xafb10014, 0x93620023, 0x00e09021, 0x30420040, 0x10400020, + 0x30b1ffff, 0x3c020800, 0x8c430020, 0x1060001c, 0x00000000, 0x0e001006, + 0x00000000, 0x8f820018, 0xac500000, 0x8f840018, 0x3c02008d, 0xac820004, + 0x8f830018, 0xac600008, 0x8f820018, 0xac40000c, 0x8f830018, 0xac600010, + 0x8f820018, 0xac520014, 0x8f850018, 0x3c026000, 0x8c434448, 0x24040001, + 0x3c020800, 0xaca30018, 0x9443466e, 0x8f850018, 0x3c024019, 0x00621825, + 0x0e001044, 0xaca3001c, 0x93620023, 0x30420020, 0x14400003, 0x3c020800, + 0x52600020, 0x3c029000, 0x8c430020, 0x1060001d, 0x3c029000, 0x0e001006, + 0x00000000, 0x8f820018, 0xac500000, 0x8f840018, 0x00111400, 0xac820004, + 0x8f830018, 0xac720008, 0x8f820018, 0xac40000c, 0x8f830018, 0xac600010, + 0x8f820018, 0xac400014, 0x8f850018, 0x3c026000, 0x8c434448, 0x24040001, + 0x3c020800, 0xaca30018, 0x9443466e, 0x8f850018, 0x3c02401b, 0x00621825, + 0x0e001044, 0xaca3001c, 0x3c029000, 0x34420001, 0x02021025, 0xaf420020, + 0x3c038000, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x93630023, + 0x3c028000, 0x34420001, 0x02021025, 0x8fbf0020, 0x8fb3001c, 0x8fb20018, + 0x8fb10014, 0x8fb00010, 0x3063009f, 0xa3630023, 0xaf420020, 0x03e00008, + 0x27bd0028, 0x3c020800, 0x8c430020, 0x27bdffe8, 0xafb00010, 0x27500100, + 0x1060001d, 0xafbf0014, 0x0e001006, 0x00000000, 0x8f830018, 0x8e020004, + 0xac620000, 0x8f840018, 0x8e020018, 0xac820004, 0x8f850018, 0x8e020000, + 0xaca20008, 0x8f830018, 0xac60000c, 0x8f820018, 0xac400010, 0x8f830018, + 0xac600014, 0x8f820018, 0xac400018, 0x96030008, 0x3c020800, 0x9444466e, + 0x8f850018, 0x00031c00, 0x00641825, 0x24040001, 0x0e001044, 0xaca3001c, + 0x8fbf0014, 0x8fb00010, 0x03e00008, 0x27bd0018, 0x3c060800, 0x24c54660, + 0x3c02000a, 0x03421821, 0x94640006, 0x94a2000a, 0x00441023, 0x00021400, + 0x00021c03, 0x04610006, 0xa4a40006, 0x0000000d, 0x00000000, 0x2400005a, + 0x0a00101b, 0x24020001, 0x8f820014, 0x0062102b, 0x14400002, 0x00001021, + 0x24020001, 0x304200ff, 0x1040001c, 0x274a0400, 0x3c07000a, 0x3c020800, + 0x24454660, 0x94a9000a, 0x8f880014, 0x03471021, 0x94430006, 0x00402021, + 0xa4a30006, 0x94820006, 0xa4a20006, 0x01221023, 0x00021400, 0x00021403, + 0x04410006, 0x0048102b, 0x0000000d, 0x00000000, 0x2400005a, 0x0a001036, + 0x24020001, 0x14400002, 0x00001021, 0x24020001, 0x304200ff, 0x1440ffec, + 0x03471021, 0x24c44660, 0x8c820010, 0xaf420038, 0x8c830014, 0x3c020005, + 0xaf43003c, 0xaf420030, 0xaf800010, 0xaf8a0018, 0x03e00008, 0x00000000, + 0x27bdffe0, 0x8f820010, 0x8f850018, 0x3c070800, 0x24e84660, 0xafbf001c, + 0xafb20018, 0xafb10014, 0xafb00010, 0x9503000a, 0x8d060014, 0x00009021, + 0x309000ff, 0x00e08821, 0x24420001, 0x24a50020, 0x24630001, 0xaf820010, + 0xaf850018, 0xa503000a, 0x24c30020, 0x3c028000, 0x04c10007, 0xad030014, + 0x00621024, 0x14400005, 0x26224660, 0x8d020010, 0x24420001, 0xad020010, + 0x26224660, 0x9444000a, 0x94450018, 0x0010102b, 0x00a41826, 0x2c630001, + 0x00621825, 0x1060001c, 0x3c030006, 0x8f820010, 0x24120001, 0x00021140, + 0x00431025, 0xaf420030, 0x00000000, 0x00000000, 0x00000000, 0x27450400, + 0x8f420000, 0x30420010, 0x1040fffd, 0x26224660, 0x9444000a, 0x94430018, + 0xaf800010, 0xaf850018, 0x14830012, 0x26274660, 0x0e0010d2, 0x00000000, + 0x1600000e, 0x26274660, 0x0e001006, 0x00000000, 0x0a00108f, 0x26274660, + 0x00041c00, 0x00031c03, 0x00051400, 0x00021403, 0x00621823, 0x18600002, + 0x3c026000, 0xac400808, 0x26274660, 0x94e2000e, 0x94e3000c, 0x24420001, + 0xa4e2000e, 0x3042ffff, 0x50430001, 0xa4e0000e, 0x12000005, 0x3c02000a, + 0x94e2000a, 0xa74200a2, 0x0a0010cc, 0x02401021, 0x03421821, 0x94640006, + 0x94e2000a, 0x00441023, 0x00021400, 0x00021c03, 0x04610006, 0xa4e40006, + 0x0000000d, 0x00000000, 0x2400005a, 0x0a0010ae, 0x24020001, 0x8f820014, + 0x0062102b, 0x14400002, 0x00001021, 0x24020001, 0x304200ff, 0x1040001b, + 0x3c020800, 0x3c06000a, 0x24454660, 0x94a8000a, 0x8f870014, 0x03461021, + 0x94430006, 0x00402021, 0xa4a30006, 0x94820006, 0xa4a20006, 0x01021023, + 0x00021400, 0x00021403, 0x04410006, 0x0047102b, 0x0000000d, 0x00000000, + 0x2400005a, 0x0a0010c8, 0x24020001, 0x14400002, 0x00001021, 0x24020001, + 0x304200ff, 0x1440ffec, 0x03461021, 0x02401021, 0x8fbf001c, 0x8fb20018, + 0x8fb10014, 0x8fb00010, 0x03e00008, 0x27bd0020, 0x3c020800, 0x24454660, + 0x94a3001a, 0x8ca40024, 0x00403021, 0x000318c0, 0x00832021, 0xaf44003c, + 0x8ca20020, 0xaf420038, 0x3c020050, 0x34420008, 0xaf420030, 0x00000000, + 0x00000000, 0x00000000, 0x8f420000, 0x30420020, 0x1040fffd, 0x00000000, + 0x8f430400, 0x24c64660, 0xacc30010, 0x8f420404, 0x3c030020, 0xacc20014, + 0xaf430030, 0x94c40018, 0x94c3001c, 0x94c2001a, 0x94c5001e, 0x00832021, + 0x24420001, 0xa4c2001a, 0x3042ffff, 0x14450002, 0xa4c40018, 0xa4c0001a, + 0x03e00008, 0x00000000, 0x8f820010, 0x3c030006, 0x00021140, 0x00431025, + 0xaf420030, 0x00000000, 0x00000000, 0x00000000, 0x27430400, 0x8f420000, + 0x30420010, 0x1040fffd, 0x00000000, 0xaf800010, 0xaf830018, 0x03e00008, + 0x00000000, 0x27bdffe8, 0xafb00010, 0x3c100800, 0x26104660, 0x3c05000a, + 0x02002021, 0x03452821, 0xafbf0014, 0x0e001128, 0x2406000a, 0x96020002, + 0x9603001e, 0x3042000f, 0x24420003, 0x00431804, 0x24027fff, 0x0043102b, + 0xaf830014, 0x10400004, 0x00000000, 0x0000000d, 0x00000000, 0x24000043, + 0x0e0010d2, 0x00000000, 0x8fbf0014, 0x8fb00010, 0x03e00008, 0x27bd0018, + 0x10c00007, 0x00000000, 0x8ca20000, 0x24c6ffff, 0x24a50004, 0xac820000, + 0x14c0fffb, 0x24840004, 0x03e00008, 0x00000000, 0x0a001137, 0x00a01021, + 0xac860000, 0x24840004, 0x00a01021, 0x1440fffc, 0x24a5ffff, 0x03e00008, + 0x00000000, 0x3c036000, 0x8c642b7c, 0x3c036010, 0x8c6553fc, 0x00041582, + 0x00042302, 0x308403ff, 0x00052d82, 0x00441026, 0x0002102b, 0x0005282b, + 0x00451025, 0x1440000d, 0x3c020050, 0x34420004, 0xaf400038, 0xaf40003c, + 0xaf420030, 0x00000000, 0x00000000, 0x8f420000, 0x30420020, 0x1040fffd, + 0x3c020020, 0xaf420030, 0x0000000d, 0x03e00008, 0x00000000, 0x3c020050, + 0x34420004, 0xaf440038, 0xaf45003c, 0xaf420030, 0x00000000, 0x00000000, + 0x8f420000, 0x30420020, 0x1040fffd, 0x3c020020, 0xaf420030, 0x03e00008, + 0x00000000, 0x00000000 }; + +static u32 bnx2_COM_b06FwData[(0x0/4) + 1] = { 0x00000000 }; +static u32 bnx2_COM_b06FwRodata[(0x18/4) + 1] = { + 0x08002318, 0x08002348, 0x08002378, 0x080023a8, 0x080023d8, 0x00000000, + 0x00000000 }; + +static u32 bnx2_COM_b06FwBss[(0x88/4) + 1] = { 0x00000000 }; +static u32 bnx2_COM_b06FwSbss[(0x1c/4) + 1] = { 0x00000000 }; + +static int bnx2_RXP_b06FwReleaseMajor = 0x0; +static int bnx2_RXP_b06FwReleaseMinor = 0x0; +static int bnx2_RXP_b06FwReleaseFix = 0x0; +static u32 bnx2_RXP_b06FwStartAddr = 0x08000060; +static u32 bnx2_RXP_b06FwTextAddr = 0x08000000; +static int bnx2_RXP_b06FwTextLen = 0x20b8; +static u32 bnx2_RXP_b06FwDataAddr = 0x080020e0; +static int bnx2_RXP_b06FwDataLen = 0x0; +static u32 bnx2_RXP_b06FwRodataAddr = 0x00000000; +static int bnx2_RXP_b06FwRodataLen = 0x0; +static u32 bnx2_RXP_b06FwBssAddr = 0x08002100; +static int bnx2_RXP_b06FwBssLen = 0x239c; +static u32 bnx2_RXP_b06FwSbssAddr = 0x080020e0; +static int bnx2_RXP_b06FwSbssLen = 0x14; + +static u32 bnx2_RXP_b06FwText[(0x20b8/4) + 1] = { + 0x0a000018, 0x00000000, 0x00000000, 0x0000000d, 0x72787020, 0x302e362e, + 0x39000000, 0x00060903, 0x00000000, 0x0000000d, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x10000003, 0x00000000, 0x0000000d, 0x0000000d, 0x3c020800, + 0x244220e0, 0x3c030800, 0x2463449c, 0xac400000, 0x0043202b, 0x1480fffd, + 0x24420004, 0x3c1d0800, 0x37bd3ffc, 0x03a0f021, 0x3c100800, 0x26100060, + 0x3c1c0800, 0x279c20e0, 0x0e000329, 0x00000000, 0x0000000d, 0x8f870008, + 0x2ce20080, 0x10400018, 0x3c030800, 0x24633490, 0x8f460100, 0x00072140, + 0x00831021, 0xac460000, 0x8f450104, 0x00641021, 0xac450004, 0x8f460108, + 0xac460008, 0x8f45010c, 0xac45000c, 0x8f460114, 0xac460010, 0x8f450118, + 0xac450014, 0x8f460124, 0xac460018, 0x8f450128, 0x00641821, 0x24e20001, + 0xaf820008, 0xac65001c, 0x03e00008, 0x00000000, 0x00804021, 0x8f830000, + 0x24070001, 0x3c020001, 0x00621024, 0x10400037, 0x00603021, 0x9742010e, + 0x3c038000, 0x3045ffff, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003, + 0xa342018b, 0x8f840004, 0x24020080, 0x24030002, 0xaf420180, 0xa743018c, + 0x10800005, 0xa745018e, 0x9743011c, 0x9742011e, 0x0a000069, 0x00021400, + 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f84000c, + 0x24020003, 0x30838000, 0x1060000d, 0xa7420188, 0x93420116, 0x304200fc, + 0x005a1021, 0x24424004, 0x8c430000, 0x3063ffff, 0x14600005, 0x00000000, + 0x3c02ffff, 0x34427fff, 0x00821024, 0xaf82000c, 0x9782000e, 0x9743010c, + 0x8f440104, 0x3042bfff, 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, + 0xaf4301ac, 0x3c021000, 0xaf4201b8, 0x03e00008, 0x00001021, 0x30c21000, + 0x1040000f, 0x00000000, 0x9742010c, 0x3042fc00, 0x5440000b, 0x24070005, + 0x3c021000, 0x00c21024, 0x10400007, 0x3c030dff, 0x3463ffff, 0x3c020e00, + 0x00c21024, 0x0062182b, 0x54600001, 0x24070005, 0x8f82000c, 0x30434000, + 0x10600016, 0x00404821, 0x3c020f00, 0x00c21024, 0x14400012, 0x00000000, + 0x93420116, 0x34424000, 0x03421821, 0x94650002, 0x2ca21389, 0x1040000b, + 0x3c020800, 0x24422100, 0x00051942, 0x00031880, 0x00621821, 0x30a5001f, + 0x8c640000, 0x24020001, 0x00a21004, 0x00822024, 0x01044025, 0x11000037, + 0x3c021000, 0x9742010e, 0x34e60002, 0x3c038000, 0x24420004, 0x3045ffff, + 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003, 0xa342018b, 0x8f840004, + 0x24020180, 0x24030002, 0xaf420180, 0xa743018c, 0x10800005, 0xa745018e, + 0x9743011c, 0x9742011e, 0x0a0000cd, 0x00021400, 0x9743011e, 0x9742011c, + 0x00021400, 0x00621825, 0xaf4301a8, 0x8f84000c, 0x30828000, 0x1040000c, + 0xa7460188, 0x93420116, 0x304200fc, 0x005a1021, 0x24424004, 0x8c430000, + 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, 0x00821024, 0xaf82000c, + 0x9782000e, 0x9743010c, 0x8f440104, 0x3042bfff, 0x00031c00, 0x3084ffff, + 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000, 0xaf4201b8, 0x03e00008, + 0x00001021, 0x00c21024, 0x104000ba, 0x3c020800, 0x8c430030, 0x1060003e, + 0x31224000, 0x1040003c, 0x3c030f00, 0x00c31824, 0x3c020100, 0x0043102b, + 0x14400038, 0x3c030800, 0x9742010e, 0x34e60002, 0x3c038000, 0x24420004, + 0x3045ffff, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003, 0xa342018b, + 0x8f840004, 0x24020080, 0x24030002, 0xaf420180, 0xa743018c, 0x10800005, + 0xa745018e, 0x9743011c, 0x9742011e, 0x0a000110, 0x00021400, 0x9743011e, + 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f84000c, 0x30828000, + 0x1040000c, 0xa7460188, 0x93420116, 0x304200fc, 0x005a1021, 0x24424004, + 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, 0x00821024, + 0xaf82000c, 0x9782000e, 0x9743010c, 0x8f440104, 0x3042bfff, 0x00031c00, + 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000, 0xaf4201b8, + 0x03e00008, 0x00001021, 0x3c030800, 0x8c620024, 0x30420008, 0x1040003d, + 0x34e80002, 0x3c020f00, 0x00c21024, 0x5440003a, 0x3107ffff, 0x9742010c, + 0x30420200, 0x50400036, 0x3107ffff, 0x9742010e, 0x30e6fffb, 0x3c038000, + 0x24420004, 0x3045ffff, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003, + 0xa342018b, 0x8f840004, 0x24020180, 0x24030002, 0xaf420180, 0xa743018c, + 0x10800005, 0xa745018e, 0x9743011c, 0x9742011e, 0x0a000153, 0x00021400, + 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f84000c, + 0x30828000, 0x1040000c, 0xa7460188, 0x93420116, 0x304200fc, 0x005a1021, + 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, + 0x00821024, 0xaf82000c, 0x9782000e, 0x9743010c, 0x8f440104, 0x3042bfff, + 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000, + 0xaf4201b8, 0x3107ffff, 0x8f820000, 0x3c068000, 0x9743010e, 0x00021442, + 0x30440780, 0x24630004, 0x3065ffff, 0x8f4201b8, 0x00461024, 0x1440fffd, + 0x24020003, 0xa342018b, 0x8f830004, 0x24020002, 0xaf440180, 0xa742018c, + 0x10600005, 0xa745018e, 0x9743011c, 0x9742011e, 0x0a000189, 0x00021400, + 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f84000c, + 0x30828000, 0x1040000c, 0xa7470188, 0x93420116, 0x304200fc, 0x005a1021, + 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, + 0x00821024, 0xaf82000c, 0x9782000e, 0x9743010c, 0x8f440104, 0x3042bfff, + 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000, + 0xaf4201b8, 0x03e00008, 0x00001021, 0x8f424000, 0x30420100, 0x104000ef, + 0x3c020800, 0x8c440024, 0x24030001, 0x14830036, 0x00404021, 0x9742010e, + 0x34e50002, 0x3c038000, 0x24420004, 0x3044ffff, 0x8f4201b8, 0x00431024, + 0x1440fffd, 0x24020003, 0xa342018b, 0x8f830004, 0x24020002, 0xaf400180, + 0xa742018c, 0x10600005, 0xa744018e, 0x9743011c, 0x9742011e, 0x0a0001c6, + 0x00021400, 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, + 0x8f84000c, 0x30828000, 0x1040000c, 0xa7450188, 0x93420116, 0x304200fc, + 0x005a1021, 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, + 0x34427fff, 0x00821024, 0xaf82000c, 0x9782000e, 0x9743010c, 0x8f440104, + 0x3042bfff, 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, + 0x3c021000, 0xaf4201b8, 0x03e00008, 0x00001021, 0x30820001, 0x10400035, + 0x30e90004, 0x9742010e, 0x30e6fffb, 0x3c038000, 0x24420004, 0x3044ffff, + 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003, 0xa342018b, 0x8f830004, + 0x24020002, 0xaf400180, 0xa742018c, 0x10600005, 0xa744018e, 0x9743011c, + 0x9742011e, 0x0a0001fe, 0x00021400, 0x9743011e, 0x9742011c, 0x00021400, + 0x00621825, 0xaf4301a8, 0x8f84000c, 0x30828000, 0x1040000c, 0xa7470188, + 0x93420116, 0x304200fc, 0x005a1021, 0x24424004, 0x8c430000, 0x3063ffff, + 0x14600004, 0x3c02ffff, 0x34427fff, 0x00821024, 0xaf82000c, 0x9782000e, + 0x9743010c, 0x8f440104, 0x3042bfff, 0x00031c00, 0x3084ffff, 0x00641825, + 0xa74201a6, 0xaf4301ac, 0x3c021000, 0xaf4201b8, 0x30c7ffff, 0x8d020024, + 0x30420004, 0x10400037, 0x8d020024, 0x9742010e, 0x30e6fffb, 0x3c038000, + 0x24420004, 0x3045ffff, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003, + 0xa342018b, 0x8f840004, 0x24020100, 0x24030002, 0xaf420180, 0xa743018c, + 0x10800005, 0xa745018e, 0x9743011c, 0x9742011e, 0x0a000237, 0x00021400, + 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f84000c, + 0x30828000, 0x1040000c, 0xa7470188, 0x93420116, 0x304200fc, 0x005a1021, + 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, + 0x00821024, 0xaf82000c, 0x9782000e, 0x9743010c, 0x8f440104, 0x3042bfff, + 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000, + 0xaf4201b8, 0x30c7ffff, 0x8d020024, 0x30420008, 0x10400034, 0x00000000, + 0x9742010e, 0x3c038000, 0x24420004, 0x3045ffff, 0x8f4201b8, 0x00431024, + 0x1440fffd, 0x24020003, 0xa342018b, 0x8f840004, 0x24020180, 0x24030002, + 0xaf420180, 0xa743018c, 0x10800005, 0xa745018e, 0x9743011c, 0x9742011e, + 0x0a00026f, 0x00021400, 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, + 0xaf4301a8, 0x8f84000c, 0x30828000, 0x1040000c, 0xa7470188, 0x93420116, + 0x304200fc, 0x005a1021, 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, + 0x3c02ffff, 0x34427fff, 0x00821024, 0xaf82000c, 0x9782000e, 0x9743010c, + 0x8f440104, 0x3042bfff, 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, + 0xaf4301ac, 0x3c021000, 0xaf4201b8, 0x15200046, 0x00001021, 0x3c038000, + 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020002, 0x24032000, 0xa342018b, + 0xa7430188, 0x3c021000, 0xaf4201b8, 0x03e00008, 0x00001021, 0x3c030800, + 0x8c620024, 0x30420001, 0x10400035, 0x00001021, 0x9742010e, 0x34e50002, + 0x3c038000, 0x24420004, 0x3044ffff, 0x8f4201b8, 0x00431024, 0x1440fffd, + 0x24020003, 0xa342018b, 0x8f830004, 0x24020002, 0xaf400180, 0xa742018c, + 0x10600005, 0xa744018e, 0x9743011c, 0x9742011e, 0x0a0002b5, 0x00021400, + 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f84000c, + 0x30828000, 0x1040000c, 0xa7450188, 0x93420116, 0x304200fc, 0x005a1021, + 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, + 0x00821024, 0xaf82000c, 0x9782000e, 0x9743010c, 0x8f440104, 0x3042bfff, + 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000, + 0xaf4201b8, 0x00001021, 0x03e00008, 0x00000000, 0x27bdffe0, 0xafbf0018, + 0xafb10014, 0xafb00010, 0x8f420140, 0xaf420020, 0x8f430148, 0x3c027000, + 0x00621824, 0x3c024000, 0x1062000c, 0x0043102b, 0x14400006, 0x3c025000, + 0x3c023000, 0x1062000b, 0x3c024000, 0x0a00031f, 0x00000000, 0x10620034, + 0x3c024000, 0x0a00031f, 0x00000000, 0x0e00067c, 0x00000000, 0x0a00031f, + 0x3c024000, 0x8f420148, 0x24030002, 0x3044ffff, 0x00021402, 0x305000ff, + 0x1203000c, 0x27510180, 0x2a020003, 0x10400005, 0x24020003, 0x0600001d, + 0x36053000, 0x0a00030a, 0x3c038000, 0x12020007, 0x00000000, 0x0a000317, + 0x00000000, 0x0e000423, 0x00000000, 0x0a000308, 0x00402021, 0x0e000435, + 0x00000000, 0x00402021, 0x36053000, 0x3c038000, 0x8f4201b8, 0x00431024, + 0x1440fffd, 0x24020002, 0xa6250008, 0xa222000b, 0xa6240010, 0x8f420144, + 0x3c031000, 0xae220024, 0xaf4301b8, 0x0a00031f, 0x3c024000, 0x0000000d, + 0x00000000, 0x240001c3, 0x0a00031f, 0x3c024000, 0x0e0007f7, 0x00000000, + 0x3c024000, 0xaf420178, 0x00000000, 0x8fbf0018, 0x8fb10014, 0x8fb00010, + 0x03e00008, 0x27bd0020, 0x24020800, 0x03e00008, 0xaf4201b8, 0x27bdffe8, + 0x3c04600c, 0xafbf0014, 0xafb00010, 0x8c825000, 0x3c1a8000, 0x2403ff7f, + 0x3c106000, 0x00431024, 0x3442380c, 0x24030003, 0xac825000, 0x3c040008, + 0xaf430008, 0x8e020808, 0x3c030800, 0xac600020, 0x3042fff0, 0x2c420001, + 0xaf820004, 0x0e000819, 0x0344d825, 0x0e000781, 0x00000000, 0x3c020400, + 0x3442000c, 0x3c03ffff, 0x34630806, 0xae021948, 0xae03194c, 0x8e021980, + 0x34420200, 0xae021980, 0x8f500000, 0x32020003, 0x1040fffd, 0x32020001, + 0x10400004, 0x32020002, 0x0e0003bd, 0x00000000, 0x32020002, 0x1040fff6, + 0x00000000, 0x0e0002d4, 0x00000000, 0x0a00034a, 0x00000000, 0x27bdffe8, + 0x3c04600c, 0xafbf0014, 0xafb00010, 0x8c825000, 0x3c1a8000, 0x2403ff7f, + 0x3c106000, 0x00431024, 0x3442380c, 0x24030003, 0xac825000, 0x3c040008, + 0xaf430008, 0x8e020808, 0x3c030800, 0xac600020, 0x3042fff0, 0x2c420001, + 0xaf820004, 0x0e000819, 0x0344d825, 0x0e000781, 0x00000000, 0x3c020400, + 0x3442000c, 0x3c03ffff, 0x34630806, 0xae021948, 0xae03194c, 0x8e021980, + 0x8fbf0014, 0x34420200, 0xae021980, 0x8fb00010, 0x03e00008, 0x27bd0018, + 0x30a5ffff, 0x30c6ffff, 0x30e7ffff, 0x3c038000, 0x8f4201b8, 0x00431024, + 0x1440fffd, 0x24020003, 0xa342018b, 0x8f830004, 0xaf440180, 0xa745018c, + 0x10600005, 0xa746018e, 0x9743011c, 0x9742011e, 0x0a000393, 0x00021400, + 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f84000c, + 0x30828000, 0x1040000c, 0xa7470188, 0x93420116, 0x304200fc, 0x005a1021, + 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, + 0x00821024, 0xaf82000c, 0x9782000e, 0x9743010c, 0x8f440104, 0x3042bfff, + 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000, + 0xaf4201b8, 0x03e00008, 0x00000000, 0x3c038000, 0x8f4201b8, 0x00431024, + 0x1440fffd, 0x24020002, 0x24032000, 0xa342018b, 0xa7430188, 0x3c021000, + 0xaf4201b8, 0x03e00008, 0x00000000, 0x27bdffe8, 0xafbf0010, 0x8f460128, + 0xaf460020, 0x8f420104, 0x8f450100, 0x24030800, 0x3c040010, 0xaf820000, + 0x00441024, 0xaf85000c, 0xaf4301b8, 0x14400005, 0x3c02001f, 0x3c030800, + 0x8c620020, 0x0a0003d5, 0x00002021, 0x3442ff00, 0x14c20009, 0x2402bfff, + 0x3c030800, 0x8c620020, 0x24040001, 0x24420001, 0x0e00004c, 0xac620020, + 0x0a0003e4, 0x00000000, 0x00a21024, 0x14400006, 0x00000000, 0xaf400048, + 0x0e000448, 0xaf400040, 0x0a0003e4, 0x00000000, 0x0e000783, 0x00000000, + 0x10400005, 0x3c024000, 0x8f430124, 0x3c026020, 0xac430014, 0x3c024000, + 0xaf420138, 0x00000000, 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x27bdffe0, + 0xafbf0018, 0xafb10014, 0xafb00010, 0x8f420148, 0x24030002, 0x3044ffff, + 0x00021402, 0x305000ff, 0x1203000c, 0x27510180, 0x2a020003, 0x10400005, + 0x24020003, 0x0600001d, 0x36053000, 0x0a00040e, 0x3c038000, 0x12020007, + 0x00000000, 0x0a00041b, 0x00000000, 0x0e000423, 0x00000000, 0x0a00040c, + 0x00402021, 0x0e000435, 0x00000000, 0x00402021, 0x36053000, 0x3c038000, + 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020002, 0xa6250008, 0xa222000b, + 0xa6240010, 0x8f420144, 0x3c031000, 0xae220024, 0xaf4301b8, 0x0a00041f, + 0x8fbf0018, 0x0000000d, 0x00000000, 0x240001c3, 0x8fbf0018, 0x8fb10014, + 0x8fb00010, 0x03e00008, 0x27bd0020, 0x3084ffff, 0x2c821389, 0x1040000d, + 0x00001021, 0x3c030800, 0x24632100, 0x00042942, 0x00052880, 0x00a32821, + 0x3086001f, 0x8ca40000, 0x24030001, 0x00c31804, 0x00832025, 0x03e00008, + 0xaca40000, 0x03e00008, 0x24020091, 0x3084ffff, 0x2c821389, 0x1040000e, + 0x00001021, 0x3c030800, 0x24632100, 0x00042942, 0x00052880, 0x00a32821, + 0x3086001f, 0x24030001, 0x8ca40000, 0x00c31804, 0x00031827, 0x00832024, + 0x03e00008, 0xaca40000, 0x03e00008, 0x24020091, 0x27bdffb0, 0x3c026000, + 0xafbf0048, 0x8c434448, 0xaf630140, 0x93620005, 0x30420001, 0x14400005, + 0x00000000, 0x0e0007ed, 0x00000000, 0x0a00067a, 0x8fbf0048, 0x93420116, + 0x93430112, 0x8f430104, 0x3c040020, 0x34424000, 0x00641824, 0x1060000d, + 0x03426021, 0x8f430128, 0x27420180, 0xac430000, 0x8f650040, 0x24040008, + 0x240340c1, 0xa4430008, 0x24030002, 0xa043000b, 0x3c031000, 0x0a000563, + 0xa044000a, 0x8f420104, 0x3c030040, 0x00431024, 0x10400007, 0x00000000, + 0x8f430128, 0x27420180, 0xac430000, 0x8f650040, 0x0a00055c, 0x24040010, + 0xaf400048, 0xaf400054, 0xaf400040, 0x8f630048, 0x8f620040, 0x00624823, + 0x05210004, 0x00000000, 0x0000000d, 0x00000000, 0x24000132, 0x9742011a, + 0x3046ffff, 0x10c00004, 0x8d880004, 0x01061021, 0x0a000487, 0x2445ffff, + 0x01002821, 0x918a000d, 0xa7a00020, 0xafa00028, 0x9364003f, 0x3c026000, + 0x8c434448, 0x308700ff, 0x31420004, 0x10400033, 0xaf630144, 0x24090012, + 0x14e90006, 0x3c040800, 0x8c830028, 0x24020001, 0x24630001, 0x0a00054e, + 0xac830028, 0x8f620044, 0x15020012, 0x97a20020, 0x27a60010, 0x27450180, + 0x3442001a, 0xa7a20020, 0x8f630040, 0x3c048000, 0x24020020, 0xa3a70022, + 0xa3a90023, 0xa3a2001a, 0xafa30028, 0x8f4201b8, 0x00441024, 0x1440fffd, + 0x00000000, 0x0a000533, 0x00000000, 0x8f620044, 0x01021023, 0x0440009e, + 0x24020001, 0x8f620048, 0x01021023, 0x0441009a, 0x24020001, 0x97a20020, + 0x27a60010, 0x34420001, 0xa7a20020, 0x8f630040, 0x27450180, 0x3c048000, + 0xafa30028, 0x8f4201b8, 0x00441024, 0x1440fffd, 0x00000000, 0x0a000533, + 0x00000000, 0x3c026000, 0x8c424448, 0xaf620148, 0x8f630040, 0x00685823, + 0x19600013, 0x00cb102a, 0x54400007, 0x314a00fe, 0x5566000c, 0x010b4021, + 0x31420001, 0x54400009, 0x010b4021, 0x314a00fe, 0x24020001, 0xa7a20020, + 0x8f630040, 0x00c05821, 0x00003021, 0x0a0004dd, 0xafa30028, 0x00cb1023, + 0x0a0004dd, 0x3046ffff, 0x00005821, 0x8f620048, 0x2442ffff, 0x00a21823, + 0x18600019, 0x0066102a, 0x14400013, 0x24020001, 0xa7a20020, 0x8f630040, + 0xafa30028, 0x8f620040, 0x55020005, 0x27a60010, 0x55200003, 0x27a60010, + 0x0a0004f6, 0x00c01821, 0x27450180, 0x3c038000, 0x8f4201b8, 0x00431024, + 0x1440fffd, 0x00000000, 0x0a000533, 0x00000000, 0x8f650048, 0x00c31023, + 0x3046ffff, 0x314a00f6, 0x3c046000, 0x8c824448, 0x31430002, 0x1060001e, + 0xaf62014c, 0x8f620044, 0x1502000e, 0x97a20020, 0x27a60010, 0x34420200, + 0xa7a20020, 0x8f630040, 0x27450180, 0x3c048000, 0xafa30028, 0x8f4201b8, + 0x00441024, 0x1440fffd, 0x00000000, 0x0a000533, 0x00000000, 0x27a60010, + 0x34420001, 0xa7a20020, 0x8f630040, 0x27450180, 0x3c048000, 0xafa30028, + 0x8f4201b8, 0x00441024, 0x1440fffd, 0x00000000, 0x0a000533, 0x00000000, + 0x3c026000, 0x8c424448, 0x31430010, 0xaf620150, 0x54600003, 0x8d890008, + 0x0a00054e, 0x24020001, 0x8f630054, 0x2522ffff, 0x00431023, 0x1840002a, + 0x24020001, 0x27a60010, 0xa7a20020, 0x8f630040, 0x27450180, 0x3c048000, + 0xafa30028, 0x8f4201b8, 0x00441024, 0x1440fffd, 0x00000000, 0x8f420128, + 0xaca20000, 0x8cc30018, 0x240240c1, 0xa4a20008, 0xaca30018, 0x90c4000a, + 0x24020002, 0xa0a2000b, 0xa0a4000a, 0x94c20010, 0xa4a20010, 0x90c30012, + 0xa0a30012, 0x90c20013, 0xa0a20013, 0x8cc30014, 0xaca30014, 0x8cc20024, + 0xaca20024, 0x8cc30028, 0xaca30028, 0x8cc4002c, 0x24020001, 0x3c031000, + 0xaca4002c, 0xaf4301b8, 0xaf400044, 0xaf400050, 0x0a00067a, 0x8fbf0048, + 0x3c026000, 0x8c424448, 0x31430020, 0x10600019, 0xaf620154, 0x8f430128, + 0x27420180, 0xac430000, 0x8f650040, 0x24040004, 0x240340c1, 0xa4430008, + 0x24030002, 0xa044000a, 0x24040008, 0xa043000b, 0x3c031000, 0xa4440010, + 0xa0400012, 0xa0400013, 0xac400014, 0xac400024, 0xac400028, 0xac40002c, + 0xac450018, 0x0e0007ed, 0xaf4301b8, 0x0a00067a, 0x8fbf0048, 0x8f430104, + 0x8c824448, 0x38e3000a, 0x2c630001, 0xaf620158, 0x38e2000c, 0x2c420001, + 0x00621825, 0x14600003, 0x2402000e, 0x14e2002a, 0x00000000, 0x50c00008, + 0x9584000e, 0x10c00004, 0xa7a60040, 0x01061021, 0x0a000583, 0x2445ffff, + 0x01002821, 0x9584000e, 0x93630035, 0x8f62004c, 0x00642004, 0x00892021, + 0x00821023, 0x1840001f, 0x3c026000, 0x8f620018, 0x01021023, 0x1c40000f, + 0x97a20020, 0x8f620018, 0x15020018, 0x3c026000, 0x8f62001c, 0x01221023, + 0x1c400008, 0x97a20020, 0x8f62001c, 0x15220011, 0x3c026000, 0x8f620058, + 0x00821023, 0x1840000c, 0x97a20020, 0xafa50028, 0xafa80034, 0xafa90038, + 0xafa4003c, 0x34420020, 0x0a0005a8, 0xa7a20020, 0x8f680040, 0x00003021, + 0x8f640058, 0x01002821, 0x3c026000, 0x8c434448, 0xaf63015c, 0x8f62004c, + 0x01221023, 0x18400009, 0x00000000, 0x8f620054, 0x01221023, 0x1c400005, + 0x97a20020, 0xafa50028, 0xafa90024, 0x0a0005c3, 0x34420040, 0x9742011a, + 0x1440000c, 0x24020014, 0x8f620058, 0x14820009, 0x24020014, 0x8f63004c, + 0x8f620054, 0x10620004, 0x97a20020, 0xafa50028, 0x34420080, 0xa7a20020, + 0x24020014, 0x10e2000a, 0x28e20015, 0x10400005, 0x2402000c, 0x10e20006, + 0x3c026000, 0x0a000600, 0x00000000, 0x24020016, 0x14e20031, 0x3c026000, + 0x8f620054, 0x24420001, 0x1522002d, 0x3c026000, 0x24020014, 0x10e2001e, + 0x28e20015, 0x10400005, 0x2402000c, 0x10e20008, 0x3c026000, 0x0a000600, + 0x00000000, 0x24020016, 0x10e2000c, 0x97a20020, 0x0a000600, 0x3c026000, + 0x97a30020, 0x2402000e, 0xafa50028, 0xa3a70022, 0xa3a20023, 0xafa90024, + 0x34630054, 0x0a0005ff, 0xa7a30020, 0x24030010, 0x24040002, 0xafa50028, + 0xa3a70022, 0xa3a30023, 0xa3a4001a, 0xafa90024, 0x0a0005fe, 0x3442005d, + 0x97a20020, 0x24030012, 0x24040002, 0xafa50028, 0xa3a70022, 0xa3a30023, + 0xa3a4001a, 0xafa90024, 0x3042fffe, 0x3442005c, 0xa7a20020, 0x3c026000, + 0x8c434448, 0x31420001, 0xaf630160, 0x1040002c, 0x2402000c, 0x10e20014, + 0x28e2000d, 0x10400005, 0x2402000a, 0x10e20008, 0x97a20020, 0x0a000631, + 0x3c026000, 0x2402000e, 0x10e20018, 0x3c026000, 0x0a000631, 0x00000000, + 0x24030008, 0x24040002, 0xafa50028, 0xa3a70022, 0xa3a30023, 0xa3a4001a, + 0x0a00062f, 0x34420013, 0x97a30020, 0x30620004, 0x1440000b, 0x97a20020, + 0x3462001b, 0xa7a20020, 0x24020016, 0x24030002, 0xafa50028, 0xa3a70022, + 0xa3a20023, 0x0a000630, 0xa3a3001a, 0x97a20020, 0x24030010, 0x24040002, + 0xafa50028, 0xa3a70022, 0xa3a30023, 0xa3a4001a, 0x3442001b, 0xa7a20020, + 0x3c026000, 0x8c434448, 0x31420009, 0x0002102b, 0x00021023, 0x30420007, + 0x34440003, 0xaf630164, 0x10c00016, 0x24030800, 0x8f820010, 0x27450180, + 0x24420001, 0xaf820010, 0x24020004, 0xaf4301b8, 0xa4a40008, 0xa0a2000b, + 0x93440120, 0x3c031000, 0xa4a6000e, 0xaca90024, 0xaca80028, 0x008b2021, + 0xa4a4000c, 0xaf4301b8, 0x97a20020, 0x00003021, 0x3042ffbf, 0x0a000650, + 0xa7a20020, 0x24060001, 0x3c026000, 0x8c434448, 0xaf630168, 0x97a20020, + 0x10400020, 0x27450180, 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd, + 0x00000000, 0x8f420128, 0xaca20000, 0x8fa30028, 0x240240c1, 0xa4a20008, + 0xaca30018, 0x93a4001a, 0x24020002, 0xa0a2000b, 0xa0a4000a, 0x97a20020, + 0xa4a20010, 0x93a30022, 0xa0a30012, 0x93a20023, 0xa0a20013, 0x8fa30024, + 0xaca30014, 0x8fa20034, 0xaca20024, 0x8fa30038, 0xaca30028, 0x8fa2003c, + 0x3c031000, 0xaca2002c, 0xaf4301b8, 0x3c026000, 0x8c434448, 0x00c01021, + 0xaf63016c, 0x8fbf0048, 0x03e00008, 0x27bd0050, 0x8f460140, 0x8f470148, + 0x3c028000, 0x00e24024, 0x00072c02, 0x30a300ff, 0x2402000b, 0x1062008f, + 0x27440180, 0x2862000c, 0x10400011, 0x24020006, 0x1062005a, 0x28620007, + 0x10400007, 0x24020008, 0x10600024, 0x24020001, 0x10620037, 0x00000000, + 0x0a00077e, 0x00000000, 0x106200a9, 0x24020009, 0x106200bb, 0x00071c02, + 0x0a00077e, 0x00000000, 0x2402001b, 0x106200c7, 0x2862001c, 0x10400007, + 0x2402000e, 0x106200b1, 0x24020019, 0x106200c2, 0x00071c02, 0x0a00077e, + 0x00000000, 0x24020080, 0x10620060, 0x28620081, 0x10400005, 0x2402001c, + 0x10620094, 0x00071c02, 0x0a00077e, 0x00000000, 0x240200c2, 0x106200c5, + 0x00a01821, 0x0a00077e, 0x00000000, 0x00a01821, 0x3c058000, 0x8f4201b8, + 0x00451024, 0x1440fffd, 0x24020001, 0xa4830008, 0x24030002, 0xac860000, + 0xac800004, 0xa082000a, 0xa083000b, 0xa4870010, 0x8f430144, 0x3c021000, + 0xac800028, 0xac830024, 0x3c036000, 0xaf4201b8, 0x03e00008, 0xac600808, + 0x11000009, 0x00a01821, 0x3c020800, 0x24030002, 0xa0434490, 0x24424490, + 0xac460008, 0x8f430144, 0x03e00008, 0xac430004, 0x3c058000, 0x8f4201b8, + 0x00451024, 0x1440fffd, 0x24020002, 0xac800000, 0xac860004, 0xa4830008, + 0xa082000a, 0xa082000b, 0xa4870010, 0xac800024, 0x8f420144, 0x3c031000, + 0xac820028, 0x3c026000, 0xaf4301b8, 0x03e00008, 0xac400808, 0x00a01821, + 0x3c080800, 0x3c058000, 0x8f4201b8, 0x00451024, 0x1440fffd, 0x00000000, + 0xac860000, 0x91024490, 0x00002821, 0x10400002, 0x25064490, 0x8cc50008, + 0xac850004, 0xa4830008, 0x91034490, 0x24020002, 0xa082000b, 0xa4870010, + 0x34630001, 0xa083000a, 0x8f420144, 0xac820024, 0x91034490, 0x10600002, + 0x00001021, 0x8cc20004, 0xac820028, 0x3c021000, 0xaf4201b8, 0x3c026000, + 0xa1004490, 0x03e00008, 0xac400808, 0x00a01821, 0x3c058000, 0x8f4201b8, + 0x00451024, 0x1440fffd, 0x24020002, 0xa082000b, 0xa4830008, 0xa4870010, + 0x8f420144, 0x3c031000, 0xa4820012, 0x03e00008, 0xaf4301b8, 0x30e2ffff, + 0x14400028, 0x00071c02, 0x93620005, 0x30420004, 0x14400020, 0x3c029000, + 0x34420001, 0x00c21025, 0xaf420020, 0x3c038000, 0x8f420020, 0x00431024, + 0x1440fffd, 0x00000000, 0x93620005, 0x3c038000, 0x34630001, 0x00c31825, + 0x34420004, 0xa3620005, 0xaf430020, 0x93620005, 0x30420004, 0x14400003, + 0x3c038000, 0x0000000d, 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd, + 0x24020005, 0x3c031000, 0xac860000, 0xa082000b, 0xaf4301b8, 0x0a00073d, + 0x00071c02, 0x0000000d, 0x03e00008, 0x00000000, 0x00071c02, 0x3c058000, + 0x8f4201b8, 0x00451024, 0x1440fffd, 0x24020001, 0xa4830008, 0x24030002, + 0xac860000, 0xac800004, 0xa082000a, 0xa083000b, 0xa4870010, 0x8f430144, + 0x3c021000, 0xac800028, 0xac830024, 0x03e00008, 0xaf4201b8, 0x00071c02, + 0x3c058000, 0x8f4201b8, 0x00451024, 0x1440fffd, 0x24020002, 0xac800000, + 0xac860004, 0xa4830008, 0xa082000a, 0xa082000b, 0xa4870010, 0xac800024, + 0x8f420144, 0x3c031000, 0xac820028, 0x03e00008, 0xaf4301b8, 0x00071c02, + 0x3c058000, 0x8f4201b8, 0x00451024, 0x1440fffd, 0x24020001, 0xa4830008, + 0x24030002, 0xa082000a, 0x3c021000, 0xac860000, 0xac800004, 0xa083000b, + 0xa4870010, 0xac800024, 0xac800028, 0x03e00008, 0xaf4201b8, 0x3c058000, + 0x8f4201b8, 0x00451024, 0x1440fffd, 0x24020002, 0xac860000, 0xac800004, + 0xa4830008, 0xa080000a, 0x0a000748, 0xa082000b, 0x0000000d, 0x03e00008, + 0x00000000, 0x03e00008, 0x00000000, 0x8f420100, 0x3042003e, 0x14400011, + 0x24020001, 0xaf400048, 0x8f420100, 0x304207c0, 0x10400005, 0x00000000, + 0xaf40004c, 0xaf400050, 0x03e00008, 0x24020001, 0xaf400054, 0xaf400040, + 0x8f420100, 0x30423800, 0x54400001, 0xaf400044, 0x24020001, 0x03e00008, + 0x00000000, 0x3c029000, 0x34420001, 0x00822025, 0xaf440020, 0x3c038000, + 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x03e00008, 0x00000000, + 0x3c028000, 0x34420001, 0x00822025, 0x03e00008, 0xaf440020, 0x8f430128, + 0x27420180, 0xac430000, 0x8f650040, 0x240340c1, 0xa4430008, 0x24030002, + 0xa044000a, 0x24040008, 0xa043000b, 0x3c031000, 0xa4440010, 0xa0400012, + 0xa0400013, 0xac400014, 0xac400024, 0xac400028, 0xac40002c, 0xac450018, + 0x03e00008, 0xaf4301b8, 0x24020001, 0xacc40000, 0x03e00008, 0xa4e50000, + 0x03e00008, 0x24020001, 0x24020001, 0xaf400044, 0x03e00008, 0xaf400050, + 0x00803021, 0x27450180, 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd, + 0x00000000, 0x8f420128, 0xaca20000, 0x8cc30018, 0x240240c1, 0xa4a20008, + 0xaca30018, 0x90c4000a, 0x24020002, 0xa0a2000b, 0xa0a4000a, 0x94c20010, + 0xa4a20010, 0x90c30012, 0xa0a30012, 0x90c20013, 0xa0a20013, 0x8cc30014, + 0xaca30014, 0x8cc20024, 0xaca20024, 0x8cc30028, 0xaca30028, 0x8cc2002c, + 0x3c031000, 0xaca2002c, 0x24020001, 0xaf4301b8, 0xaf400044, 0x03e00008, + 0xaf400050, 0x27bdffe8, 0xafbf0010, 0x0e000326, 0x00000000, 0x00002021, + 0x0e00004c, 0xaf400180, 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x8f460148, + 0x27450180, 0x3c038000, 0x00061402, 0x304700ff, 0x8f4201b8, 0x00431024, + 0x1440fffd, 0x00000000, 0x8f440140, 0x00061202, 0x304200ff, 0x00061c02, + 0xaca20004, 0x24020002, 0xa4a30008, 0x30c300ff, 0xa0a2000b, 0xaca30024, + 0x10e0000a, 0xaca40000, 0x28e20004, 0x14400005, 0x24020001, 0x24020005, + 0x54e20005, 0xa0a0000a, 0x24020001, 0x0a000816, 0xa0a2000a, 0xa0a0000a, + 0x3c021000, 0x03e00008, 0xaf4201b8, 0x03e00008, 0x00001021, 0x10c00007, + 0x00000000, 0x8ca20000, 0x24c6ffff, 0x24a50004, 0xac820000, 0x14c0fffb, + 0x24840004, 0x03e00008, 0x00000000, 0x0a00082a, 0x00a01021, 0xac860000, + 0x24840004, 0x00a01021, 0x1440fffc, 0x24a5ffff, 0x03e00008, 0x00000000, + 0x00000000 }; + +static u32 bnx2_RXP_b06FwData[(0x0/4) + 1] = { 0x00000000 }; +static u32 bnx2_RXP_b06FwRodata[(0x0/4) + 1] = { 0x00000000 }; +static u32 bnx2_RXP_b06FwBss[(0x239c/4) + 1] = { 0x00000000 }; +static u32 bnx2_RXP_b06FwSbss[(0x14/4) + 1] = { 0x00000000 }; + +static u32 bnx2_rv2p_proc1[] = { + 0x00000008, 0xac000001, 0x0000000c, 0x2f800001, 0x00000010, 0x213f0004, + 0x00000010, 0x20bf002c, 0x00000010, 0x203f0143, 0x00000018, 0x8000fffd, + 0x00000010, 0xb1b8b017, 0x0000000b, 0x2fdf0002, 0x00000000, 0x03d80000, + 0x00000000, 0x2c380000, 0x00000008, 0x2c800000, 0x00000008, 0x2d000000, + 0x00000010, 0x91d40000, 0x00000008, 0x2d800108, 0x00000008, 0x02000002, + 0x00000010, 0x91de0000, 0x0000000f, 0x42e0001c, 0x00000010, 0x91840a08, + 0x00000008, 0x2c8000b0, 0x00000008, 0x2d000008, 0x00000008, 0x2d800150, + 0x00000000, 0x00000000, 0x00000010, 0x91de0000, 0x00000010, 0x2c620002, + 0x00000018, 0x80000012, 0x0000000b, 0x2fdf0002, 0x0000000c, 0x1f800002, + 0x00000000, 0x2c070000, 0x00000018, 0x8000ffe6, 0x00000008, 0x02000002, + 0x0000000f, 0x42e0001c, 0x00000010, 0x91840a08, 0x00000008, 0x2c8000b0, + 0x00000008, 0x2d000008, 0x00000010, 0x91d40000, 0x00000008, 0x2d800108, + 0x00000000, 0x00000000, 0x00000010, 0x91de0000, 0x00000018, 0x80000004, + 0x0000000c, 0x1f800002, 0x00000000, 0x00000000, 0x00000018, 0x8000ffd9, + 0x0000000c, 0x29800002, 0x0000000c, 0x1f800002, 0x00000000, 0x2adf0000, + 0x00000008, 0x2a000005, 0x00000018, 0x8000ffd4, 0x00000008, 0x02240030, + 0x00000018, 0x00040000, 0x00000018, 0x80000015, 0x00000018, 0x80000017, + 0x00000018, 0x8000001b, 0x00000018, 0x8000004c, 0x00000018, 0x8000008c, + 0x00000018, 0x8000000f, 0x00000018, 0x8000000e, 0x00000018, 0x8000000d, + 0x00000018, 0x8000000c, 0x00000018, 0x800000c2, 0x00000018, 0x8000000a, + 0x00000018, 0x80000009, 0x00000018, 0x80000008, 0x00000018, 0x800000fd, + 0x00000018, 0x80000006, 0x00000018, 0x80000005, 0x00000018, 0x800000ff, + 0x00000018, 0x80000104, 0x00000018, 0x80000002, 0x00000018, 0x80000098, + 0x00000018, 0x80000000, 0x0000000c, 0x1f800001, 0x00000000, 0x00000000, + 0x00000018, 0x8000ffba, 0x00000010, 0x91d40000, 0x0000000c, 0x29800001, + 0x0000000c, 0x1f800001, 0x00000008, 0x2a000002, 0x00000018, 0x8000ffb5, + 0x00000010, 0xb1a0b012, 0x0000000b, 0x2fdf0002, 0x00000000, 0x2c200000, + 0x00000008, 0x2c800000, 0x00000008, 0x2d000000, 0x00000010, 0x91d40000, + 0x00000008, 0x2d80011c, 0x00000000, 0x00000000, 0x00000010, 0x91de0000, + 0x0000000f, 0x47600008, 0x0000000f, 0x060e0001, 0x00000010, 0x001f0000, + 0x00000000, 0x0f580000, 0x00000000, 0x0a640000, 0x00000000, 0x0ae50000, + 0x00000000, 0x0b660000, 0x00000000, 0x0d610000, 0x00000018, 0x80000013, + 0x0000000f, 0x47600008, 0x0000000b, 0x2fdf0002, 0x00000008, 0x2c800000, + 0x00000008, 0x2d000000, 0x00000010, 0x91d40000, 0x00000008, 0x2d80011c, + 0x0000000f, 0x060e0001, 0x00000010, 0x001f0000, 0x00000000, 0x0f580000, + 0x00000010, 0x91de0000, 0x00000000, 0x0a640000, 0x00000000, 0x0ae50000, + 0x00000000, 0x0b660000, 0x00000000, 0x0d610000, 0x00000000, 0x02620000, + 0x0000000b, 0x2fdf0002, 0x00000000, 0x309a0000, 0x00000000, 0x31040000, + 0x00000000, 0x0c961800, 0x00000009, 0x0c99ffff, 0x00000004, 0xcc993400, + 0x00000010, 0xb1963202, 0x00000008, 0x0f800000, 0x0000000c, 0x29800001, + 0x00000010, 0x00220002, 0x0000000c, 0x29520001, 0x0000000c, 0x29520000, + 0x00000008, 0x22000001, 0x0000000c, 0x1f800001, 0x00000000, 0x2adf0000, + 0x00000008, 0x2a000003, 0x00000018, 0x8000ff83, 0x00000010, 0xb1a0b01d, + 0x0000000b, 0x2fdf0002, 0x00000000, 0x2c200000, 0x00000008, 0x2c8000b0, + 0x00000008, 0x2d000008, 0x00000010, 0x91d40000, 0x00000008, 0x2d800150, + 0x00000000, 0x00000000, 0x00000010, 0x205f0000, 0x00000008, 0x2c800000, + 0x00000008, 0x2d000000, 0x00000008, 0x2d800108, 0x00000000, 0x00000000, + 0x00000010, 0x91de0000, 0x0000000f, 0x47600008, 0x00000000, 0x060e0000, + 0x00000010, 0x001f0000, 0x00000000, 0x0f580000, 0x00000010, 0x91de0000, + 0x00000000, 0x0a640000, 0x00000000, 0x0ae50000, 0x00000000, 0x0b670000, + 0x00000000, 0x0d620000, 0x00000000, 0x0ce71800, 0x00000009, 0x0c99ffff, + 0x00000004, 0xcc993400, 0x00000010, 0xb1963220, 0x00000008, 0x0f800000, + 0x00000018, 0x8000001e, 0x0000000f, 0x47600008, 0x0000000b, 0x2fdf0002, + 0x00000008, 0x2c8000b0, 0x00000008, 0x2d000008, 0x00000010, 0x91d40000, + 0x00000008, 0x2d80012c, 0x0000000f, 0x060e0001, 0x00000010, 0x001f0000, + 0x00000000, 0x0f580000, 0x00000010, 0x91de0000, 0x00000000, 0x0a640000, + 0x00000000, 0x0ae50000, 0x00000000, 0x0b670000, 0x00000000, 0x0d620000, + 0x00000000, 0x02630000, 0x0000000f, 0x47620010, 0x00000000, 0x0ce71800, + 0x0000000b, 0x2fdf0002, 0x00000000, 0x311a0000, 0x00000000, 0x31840000, + 0x0000000b, 0xc20000ff, 0x00000002, 0x42040000, 0x00000001, 0x31620800, + 0x0000000f, 0x020e0010, 0x00000002, 0x31620800, 0x00000009, 0x0c99ffff, + 0x00000004, 0xcc993400, 0x00000010, 0xb1963202, 0x00000008, 0x0f800000, + 0x0000000c, 0x29800001, 0x0000000c, 0x1f800001, 0x0000000c, 0x61420006, + 0x00000008, 0x22000008, 0x00000000, 0x2adf0000, 0x00000008, 0x2a000004, + 0x00000018, 0x8000ff42, 0x00000008, 0x2c8000b0, 0x00000008, 0x2d000008, + 0x00000010, 0x91a0b008, 0x00000010, 0x91d40000, 0x0000000c, 0x31620018, + 0x00000008, 0x2d800001, 0x00000000, 0x00000000, 0x00000010, 0x91de0000, + 0x00000008, 0xac000001, 0x00000018, 0x8000000e, 0x00000000, 0x0380b000, + 0x0000000b, 0x2fdf0002, 0x00000000, 0x2c004000, 0x00000010, 0x91d40000, + 0x00000008, 0x2d800101, 0x00000000, 0x00000000, 0x00000010, 0x91de0000, + 0x0000000c, 0x31620018, 0x00000008, 0x2d800001, 0x00000000, 0x00000000, + 0x00000010, 0x91de0000, 0x0000000b, 0x2fdf0002, 0x00000000, 0x2c000e00, + 0x0000000c, 0x29800001, 0x0000000c, 0x1f800001, 0x00000008, 0x2a000007, + 0x00000018, 0x8000ff27, 0x00000010, 0xb1a0b016, 0x0000000b, 0x2fdf0002, + 0x00000000, 0x03d80000, 0x00000000, 0x2c200000, 0x00000008, 0x2c8000b0, + 0x00000008, 0x2d000008, 0x00000010, 0x91d40000, 0x00000008, 0x2d800150, + 0x00000000, 0x00000000, 0x00000010, 0x205f0000, 0x00000008, 0x2c800000, + 0x00000008, 0x2d000000, 0x00000008, 0x2d800108, 0x00000008, 0x07000001, + 0x00000010, 0xb5de1c00, 0x00000010, 0x2c620002, 0x00000018, 0x8000000a, + 0x0000000b, 0x2fdf0002, 0x00000000, 0x2c070000, 0x0000000c, 0x1f800001, + 0x00000010, 0x91de0000, 0x00000018, 0x8000ff11, 0x00000008, 0x2c8000b0, + 0x00000008, 0x2d000008, 0x00000010, 0x91d40000, 0x00000008, 0x2d800108, + 0x0000000c, 0x29800001, 0x0000000c, 0x1f800001, 0x00000010, 0x91de0000, + 0x00000000, 0x2adf0000, 0x00000008, 0x2a00000a, 0x00000018, 0x8000ff07, + 0x00000000, 0x82265600, 0x0000000f, 0x47220008, 0x00000009, 0x070e000f, + 0x00000008, 0x070e0008, 0x00000008, 0x02800001, 0x00000007, 0x02851c00, + 0x00000008, 0x82850001, 0x00000000, 0x02840a00, 0x00000007, 0x42851c00, + 0x00000003, 0xc3aa5200, 0x00000000, 0x03b10e00, 0x00000010, 0x001f0000, + 0x0000000f, 0x0f280007, 0x00000007, 0x4b071c00, 0x00000000, 0x00000000, + 0x0000000f, 0x0a960003, 0x00000000, 0x0a955c00, 0x00000000, 0x4a005a00, + 0x00000000, 0x0c960a00, 0x00000009, 0x0c99ffff, 0x00000008, 0x0d00ffff, + 0x00000010, 0xb1963202, 0x00000008, 0x0f800005, 0x00000010, 0x00220020, + 0x00000000, 0x02a70000, 0x00000010, 0xb1850002, 0x00000008, 0x82850200, + 0x00000000, 0x02000000, 0x00000000, 0x03a60000, 0x00000018, 0x8000004e, + 0x00000000, 0x072b0000, 0x00000001, 0x878c1c00, 0x00000000, 0x870e1e00, + 0x00000000, 0x860c1e00, 0x00000000, 0x03061e00, 0x00000010, 0xb18e0003, + 0x00000018, 0x80000047, 0x00000018, 0x8000fffa, 0x00000010, 0x918c0003, + 0x00000010, 0xb1870002, 0x00000018, 0x80000043, 0x00000010, 0x91d40000, + 0x0000000c, 0x29800001, 0x00000000, 0x2a860000, 0x00000000, 0x230c0000, + 0x00000000, 0x2b070000, 0x00000010, 0xb187000e, 0x00000008, 0x2a000008, + 0x00000018, 0x8000003b, 0x00000010, 0x91d40000, 0x00000000, 0x28d18c00, + 0x00000000, 0x2a860000, 0x00000000, 0x230c0000, 0x00000000, 0x2b070000, + 0x00000018, 0x8000fff8, 0x00000010, 0x91d40000, 0x0000000c, 0x29800001, + 0x00000000, 0x2aab0000, 0x00000000, 0xa3265600, 0x00000000, 0x2b000000, + 0x0000000c, 0x1f800001, 0x00000008, 0x2a000008, 0x00000018, 0x8000fec8, + 0x00000010, 0x91d40000, 0x0000000c, 0x29800001, 0x0000000c, 0x1f800001, + 0x00000008, 0x2a000009, 0x00000018, 0x8000fec3, 0x00000010, 0x91d40000, + 0x0000000c, 0x29800001, 0x0000000c, 0x1f800001, 0x00000000, 0x29420000, + 0x00000008, 0x2a000002, 0x00000018, 0x8000febd, 0x00000018, 0x8000febc, + 0x00000010, 0xb1bcb016, 0x0000000b, 0x2fdf0002, 0x00000000, 0x03d80000, + 0x00000000, 0x2c3c0000, 0x00000008, 0x2c8000b0, 0x00000008, 0x2d000008, + 0x00000010, 0x91d40000, 0x00000008, 0x2d800150, 0x00000000, 0x00000000, + 0x00000010, 0x205f0000, 0x00000008, 0x2c800000, 0x00000008, 0x2d000000, + 0x00000008, 0x2d800108, 0x00000008, 0x07000001, 0x00000010, 0xb5de1c00, + 0x00000010, 0x2c620002, 0x00000018, 0x8000000a, 0x0000000b, 0x2fdf0002, + 0x00000000, 0x2c070000, 0x0000000c, 0x1f800000, 0x00000010, 0x91de0000, + 0x00000018, 0x8000fea6, 0x00000008, 0x2c8000b0, 0x00000008, 0x2d000008, + 0x00000010, 0x91d40000, 0x00000008, 0x2d800108, 0x0000000c, 0x29800000, + 0x0000000c, 0x1f800000, 0x00000010, 0x91de0000, 0x00000000, 0x2adf0000, + 0x00000008, 0x2a000006, 0x00000018, 0x8000fe9c, 0x00000008, 0x03050004, + 0x00000006, 0x83040c00, 0x00000008, 0x02850200, 0x00000000, 0x86050c00, + 0x00000001, 0x860c0e00, 0x00000008, 0x02040004, 0x00000000, 0x02041800, + 0x00000000, 0x83871800, 0x00000018, 0x00020000 }; + +static u32 bnx2_rv2p_proc2[] = { + 0x00000000, 0x2a000000, 0x00000010, 0xb1d40000, 0x00000008, 0x02540003, + 0x00000018, 0x00040000, 0x00000018, 0x8000000a, 0x00000018, 0x8000000a, + 0x00000018, 0x8000000e, 0x00000018, 0x80000056, 0x00000018, 0x800001b9, + 0x00000018, 0x800001e1, 0x00000018, 0x8000019b, 0x00000018, 0x800001f9, + 0x00000018, 0x8000019f, 0x00000018, 0x800001a6, 0x00000018, 0x80000000, + 0x0000000c, 0x29800001, 0x00000000, 0x2a000000, 0x0000000c, 0x29800000, + 0x00000010, 0x20530000, 0x00000018, 0x8000ffee, 0x0000000c, 0x29800001, + 0x00000010, 0x91de0000, 0x00000010, 0x001f0000, 0x00000000, 0x2f80aa00, + 0x00000000, 0x2a000000, 0x00000000, 0x0d610000, 0x00000000, 0x03620000, + 0x00000000, 0x2c400000, 0x00000000, 0x02638c00, 0x00000000, 0x26460000, + 0x00000010, 0x00420002, 0x00000008, 0x02040012, 0x00000010, 0xb9060836, + 0x00000000, 0x0f580000, 0x00000000, 0x0a640000, 0x00000000, 0x0ae50000, + 0x00000000, 0x0b660000, 0x00000000, 0x0c000000, 0x00000000, 0x0b800000, + 0x00000010, 0x00420009, 0x00000008, 0x0cc60012, 0x00000008, 0x0f800003, + 0x00000000, 0x00000000, 0x00000010, 0x009f0000, 0x00000008, 0x27110012, + 0x00000000, 0x66900000, 0x00000008, 0xa31b0012, 0x00000018, 0x80000008, + 0x00000000, 0x0cc60000, 0x00000008, 0x0f800003, 0x00000000, 0x00000000, + 0x00000010, 0x009f0000, 0x00000000, 0x27110000, 0x00000000, 0x66900000, + 0x00000000, 0x231b0000, 0x00000010, 0xb197320e, 0x00000000, 0x25960000, + 0x00000000, 0x021b0000, 0x00000010, 0x001f0000, 0x00000008, 0x0f800003, + 0x0000000c, 0x29800000, 0x00000010, 0x20530000, 0x00000000, 0x22c50800, + 0x00000010, 0x009f0000, 0x00000000, 0x27002200, 0x00000000, 0x26802000, + 0x00000000, 0x231b0000, 0x0000000c, 0x69520001, 0x00000018, 0x8000fff3, + 0x00000010, 0x01130002, 0x00000010, 0xb1980003, 0x00000010, 0x001f0000, + 0x00000008, 0x0f800004, 0x00000008, 0x22000003, 0x00000008, 0x2c80000c, + 0x00000008, 0x2d00000c, 0x00000010, 0x009f0000, 0x00000000, 0x25960000, + 0x0000000c, 0x29800000, 0x00000000, 0x32140000, 0x00000000, 0x32950000, + 0x00000000, 0x33160000, 0x00000000, 0x31e32e00, 0x00000008, 0x2d800010, + 0x00000010, 0x20530000, 0x00000018, 0x8000ffac, 0x00000000, 0x23000000, + 0x00000000, 0x25e60000, 0x00000008, 0x2200000b, 0x0000000c, 0x69520000, + 0x0000000c, 0x29800000, 0x00000010, 0x20530000, 0x00000018, 0x8000ffa5, + 0x0000000c, 0x29800001, 0x00000010, 0x91de0000, 0x00000000, 0x2fd50000, + 0x00000010, 0x001f0000, 0x00000000, 0x02700000, 0x00000000, 0x0d620000, + 0x00000000, 0xbb630800, 0x00000000, 0x2a000000, 0x00000009, 0x076000ff, + 0x0000000f, 0x2c0e0007, 0x00000008, 0x2c800000, 0x00000008, 0x2d000064, + 0x00000008, 0x2d80011c, 0x00000009, 0x06420002, 0x0000000c, 0x61420001, + 0x00000000, 0x0f400000, 0x00000000, 0x02d08c00, 0x00000000, 0x23000000, + 0x00000004, 0x826da000, 0x00000000, 0x8304a000, 0x00000000, 0x22c50c00, + 0x00000000, 0x03760000, 0x00000004, 0x83860a00, 0x00000000, 0x83870c00, + 0x00000010, 0x91de0000, 0x00000000, 0x037c0000, 0x00000000, 0x837b0c00, + 0x00000001, 0x83060e00, 0x00000000, 0x83870c00, 0x00000000, 0x82850e00, + 0x00000010, 0xb1860016, 0x0000000f, 0x47610018, 0x00000000, 0x068e0000, + 0x0000000f, 0x47670010, 0x0000000f, 0x47e20010, 0x00000000, 0x870e1e00, + 0x00000010, 0xb70e1a10, 0x00000010, 0x0ce7000e, 0x00000008, 0x22000009, + 0x00000000, 0x286d0000, 0x0000000f, 0x65680010, 0x00000003, 0xf66c9400, + 0x00000010, 0xb972a003, 0x0000000c, 0x73e70019, 0x0000000c, 0x21420004, + 0x00000018, 0x8000023f, 0x00000000, 0x37ed0000, 0x0000000c, 0x73e7001a, + 0x00000010, 0x20530000, 0x00000008, 0x22000008, 0x0000000c, 0x61420004, + 0x00000000, 0x02f60000, 0x00000004, 0x82840a00, 0x00000010, 0xb1840a2b, + 0x00000010, 0x2d67000a, 0x00000010, 0xb96d0804, 0x00000004, 0xb6ed0a00, + 0x00000000, 0x37ed0000, 0x00000018, 0x80000029, 0x0000000c, 0x61420000, + 0x00000000, 0x37040000, 0x00000000, 0x37850000, 0x0000000c, 0x33e7001a, + 0x00000018, 0x80000024, 0x00000010, 0xb96d0809, 0x00000004, 0xb6ed0a00, + 0x00000000, 0x036d0000, 0x00000004, 0xb76e0c00, 0x00000010, 0x91ee0c1f, + 0x0000000c, 0x73e7001a, 0x00000004, 0xb6ef0c00, 0x00000000, 0x37ed0000, + 0x00000018, 0x8000001b, 0x0000000c, 0x61420000, 0x00000010, 0xb7ee0a05, + 0x00000010, 0xb96f0815, 0x00000003, 0xb76e0800, 0x00000004, 0xb7ef0a00, + 0x00000018, 0x80000015, 0x00000010, 0x0ce7000c, 0x00000008, 0x22000009, + 0x00000000, 0x286d0000, 0x0000000f, 0x65680010, 0x00000003, 0xf66c9400, + 0x00000010, 0xb972a003, 0x0000000c, 0x73e70019, 0x0000000c, 0x21420004, + 0x00000018, 0x80000215, 0x00000010, 0x20530000, 0x00000008, 0x22000008, + 0x0000000c, 0x61420004, 0x00000000, 0x37040000, 0x00000000, 0x37850000, + 0x00000000, 0x036d0000, 0x00000003, 0xb8f10c00, 0x00000018, 0x80000004, + 0x00000000, 0x02840000, 0x00000002, 0x21421800, 0x0000000c, 0x61420000, + 0x00000000, 0x286d0000, 0x0000000f, 0x65ed0010, 0x00000009, 0x266dffff, + 0x00000000, 0x23000000, 0x00000010, 0xb1840a3d, 0x00000010, 0x01420002, + 0x00000004, 0xb8f10a00, 0x00000003, 0x83760a00, 0x00000010, 0xb8040c39, + 0x00000010, 0xb7e6080a, 0x00000000, 0x0a640000, 0x00000000, 0x0ae50000, + 0x00000009, 0x0c68ffff, 0x00000009, 0x0b67ffff, 0x00000000, 0x0be60000, + 0x00000000, 0x0c840000, 0x00000010, 0xb197320c, 0x00000008, 0x0f800002, + 0x00000018, 0x8000000a, 0x00000000, 0x0a6a0000, 0x00000000, 0x0aeb0000, + 0x00000000, 0x0c000000, 0x00000009, 0x0b6cffff, 0x00000000, 0x0be90000, + 0x00000000, 0x0c840000, 0x00000010, 0xb1973203, 0x00000008, 0x0f800002, + 0x00000018, 0x80000001, 0x00000010, 0x001f0000, 0x00000000, 0x0c860000, + 0x00000000, 0x06980000, 0x00000008, 0x0f800003, 0x00000000, 0x00000000, + 0x00000010, 0x009f0000, 0x00000010, 0xb1973210, 0x00000000, 0x231b0000, + 0x00000000, 0x02043600, 0x00000003, 0x8384a000, 0x0000000f, 0x65870010, + 0x00000009, 0x2607ffff, 0x00000000, 0x27111a00, 0x00000000, 0x66900000, + 0x0000000c, 0x29000000, 0x00000018, 0x800001de, 0x00000000, 0x06980000, + 0x00000010, 0x20530000, 0x00000000, 0x22c58c00, 0x00000010, 0x001f0000, + 0x00000008, 0x0f800003, 0x00000018, 0x8000fff0, 0x00000000, 0x02043600, + 0x00000000, 0x231b0000, 0x00000003, 0x8384a000, 0x0000000f, 0x65870010, + 0x00000009, 0x2607ffff, 0x00000000, 0x27111a00, 0x00000000, 0x66900000, + 0x0000000c, 0x29000000, 0x00000010, 0x91840a02, 0x00000002, 0x21421800, + 0x00000000, 0x32140000, 0x00000000, 0x32950000, 0x00000005, 0x73e72c00, + 0x00000005, 0x74683000, 0x00000000, 0x33170000, 0x00000018, 0x80000138, + 0x00000010, 0x91c60004, 0x00000008, 0x07000004, 0x00000010, 0xb1c41c02, + 0x00000010, 0x91840a04, 0x00000018, 0x800001c3, 0x00000010, 0x20530000, + 0x00000000, 0x22c58c00, 0x00000010, 0xb1840a8e, 0x0000000c, 0x21420006, + 0x00000010, 0x0ce7001a, 0x0000000f, 0x43680010, 0x00000000, 0x03f30c00, + 0x00000010, 0x91870850, 0x0000000f, 0x46ec0010, 0x00000010, 0xb68d0c4e, + 0x00000000, 0x838d0c00, 0x00000000, 0xa3050800, 0x00000001, 0xa3460e00, + 0x00000000, 0x02048c00, 0x00000010, 0x91840a02, 0x00000002, 0x21421800, + 0x00000010, 0x001f0000, 0x00000008, 0x22000008, 0x00000003, 0x8384a000, + 0x0000000f, 0x65870010, 0x00000009, 0x2607ffff, 0x00000000, 0x27750c00, + 0x00000000, 0x66f40000, 0x0000000c, 0x29000000, 0x00000018, 0x800001aa, + 0x00000000, 0x03068c00, 0x00000003, 0xf4680c00, 0x00000010, 0x20530000, + 0x00000000, 0x22c58c00, 0x00000018, 0x8000ffe5, 0x00000000, 0x39760000, + 0x00000000, 0x39840000, 0x0000000c, 0x33e70019, 0x00000010, 0x001f0000, + 0x00000000, 0x031e0000, 0x00000000, 0x0760fe00, 0x0000000f, 0x0f0e0007, + 0x00000000, 0x83850800, 0x00000000, 0x0a7d0000, 0x00000000, 0x0afe0000, + 0x00000000, 0x0b7f0000, 0x00000000, 0x0d7a0000, 0x00000000, 0x0c000000, + 0x00000000, 0x0bfc0000, 0x00000000, 0x0c970e00, 0x00000008, 0x0f800003, + 0x0000000f, 0x47670010, 0x00000008, 0x070e0001, 0x0000000b, 0xc38000ff, + 0x00000002, 0x43870000, 0x00000001, 0x33e70e00, 0x0000000f, 0x038e0010, + 0x00000002, 0x33e70e00, 0x00000000, 0x28f30000, 0x00000010, 0x009f0000, + 0x00000000, 0x02043600, 0x00000010, 0x91840a02, 0x00000002, 0x21421800, + 0x00000008, 0x22000006, 0x00000000, 0x231b0000, 0x00000000, 0x23ff0000, + 0x00000000, 0x241b0000, 0x00000003, 0x8384a000, 0x0000000f, 0x65870010, + 0x00000009, 0x2607ffff, 0x00000000, 0x27110000, 0x00000000, 0x26900000, + 0x0000000c, 0x29000000, 0x00000018, 0x8000017e, 0x00000003, 0xf4683600, + 0x00000000, 0x3a100000, 0x00000000, 0x3a910000, 0x00000003, 0xf66c2400, + 0x00000010, 0x001f0000, 0x00000010, 0xb1923604, 0x00000008, 0x0f800004, + 0x00000000, 0x00000000, 0x00000010, 0x009f0000, 0x00000000, 0x3e170000, + 0x00000000, 0x3e940000, 0x00000000, 0x3f150000, 0x00000000, 0x3f960000, + 0x00000010, 0x001f0000, 0x00000000, 0x0f060000, 0x00000010, 0x20530000, + 0x00000000, 0x22c53600, 0x00000018, 0x8000ffac, 0x00000010, 0x001f0000, + 0x00000000, 0x031e0000, 0x00000000, 0x83850800, 0x00000009, 0x076000ff, + 0x0000000f, 0x0f0e0007, 0x00000000, 0x0c000000, 0x00000000, 0x0a7d0000, + 0x00000000, 0x0afe0000, 0x00000000, 0x0b7f0000, 0x00000000, 0x0d7a0000, + 0x00000000, 0x0bfc0000, 0x00000000, 0x0c970e00, 0x00000008, 0x0f800003, + 0x0000000f, 0x47670010, 0x00000008, 0x070e0001, 0x0000000b, 0xc38000ff, + 0x00000002, 0x43870000, 0x00000001, 0x33e70e00, 0x0000000f, 0x038e0010, + 0x00000002, 0x33e70e00, 0x00000000, 0x39840000, 0x00000003, 0xb9720800, + 0x00000000, 0x28f30000, 0x0000000f, 0x65680010, 0x00000010, 0x009f0000, + 0x00000000, 0x02043600, 0x00000010, 0x91840a02, 0x00000002, 0x21421800, + 0x00000008, 0x22000007, 0x00000000, 0x231b0000, 0x00000000, 0x23ff0000, + 0x00000000, 0x241b0000, 0x00000003, 0x8384a000, 0x0000000f, 0x65870010, + 0x00000009, 0x2607ffff, 0x00000000, 0x27110000, 0x00000000, 0x26900000, + 0x0000000c, 0x29000000, 0x00000018, 0x80000145, 0x00000003, 0xf4683600, + 0x00000000, 0x3a100000, 0x00000000, 0x3a910000, 0x00000003, 0xf66c2400, + 0x00000010, 0x001f0000, 0x00000010, 0xb1923604, 0x00000008, 0x0f800004, + 0x00000000, 0x00000000, 0x00000010, 0x009f0000, 0x00000000, 0x3e170000, + 0x00000000, 0x3e940000, 0x00000000, 0x3f150000, 0x00000000, 0x3f960000, + 0x00000010, 0x001f0000, 0x00000000, 0x0f060000, 0x00000010, 0x20530000, + 0x00000000, 0x22c53600, 0x00000018, 0x8000ff73, 0x00000010, 0x0ce70005, + 0x00000008, 0x2c80000c, 0x00000008, 0x2d000070, 0x00000008, 0x2d800010, + 0x00000000, 0x00000000, 0x00000010, 0x205f0000, 0x00000018, 0x8000011d, + 0x00000000, 0x2c1e0000, 0x00000008, 0x2c8000b8, 0x00000008, 0x2d000010, + 0x00000008, 0x2d800048, 0x00000000, 0x00000000, 0x00000010, 0x91de0000, + 0x00000018, 0x8000fe5d, 0x0000000c, 0x29800001, 0x00000000, 0x2a000000, + 0x00000010, 0x001f0000, 0x00000000, 0x0f008000, 0x00000008, 0x0f800007, + 0x00000018, 0x80000006, 0x0000000c, 0x29800001, 0x00000000, 0x2a000000, + 0x00000010, 0x001f0000, 0x0000000f, 0x0f470007, 0x00000008, 0x0f800008, + 0x00000018, 0x80000119, 0x00000010, 0x20530000, 0x00000018, 0x8000fe4f, + 0x0000000c, 0x29800001, 0x00000010, 0x91de0000, 0x00000000, 0x2fd50000, + 0x00000000, 0x2a000000, 0x00000009, 0x0261ffff, 0x0000000d, 0x70e10001, + 0x00000018, 0x80000101, 0x00000000, 0x2c400000, 0x00000008, 0x2c8000c4, + 0x00000008, 0x2d00001c, 0x00000008, 0x2d800001, 0x00000005, 0x70e10800, + 0x00000010, 0x91de0000, 0x00000018, 0x8000fe41, 0x0000000c, 0x29800001, + 0x00000010, 0x91de0000, 0x00000000, 0x2fd50000, 0x00000010, 0x001f0000, + 0x00000000, 0x02700000, 0x00000000, 0x0d620000, 0x00000000, 0xbb630800, + 0x00000000, 0x2a000000, 0x00000000, 0x0f400000, 0x00000000, 0x2c400000, + 0x0000000c, 0x73e7001b, 0x00000010, 0x0ce7000e, 0x00000000, 0x286d0000, + 0x0000000f, 0x65ed0010, 0x00000009, 0x266dffff, 0x00000018, 0x80000069, + 0x00000008, 0x02000004, 0x00000010, 0x91c40803, 0x00000018, 0x800000f6, + 0x00000010, 0x20530000, 0x00000018, 0x800000e5, 0x00000008, 0x2c8000b8, + 0x00000008, 0x2d000010, 0x00000008, 0x2d800048, 0x00000018, 0x80000005, + 0x00000008, 0x2c8000c4, 0x00000008, 0x2d00001c, 0x00000008, 0x2d800001, + 0x00000000, 0x00000000, 0x00000010, 0x205f0000, 0x00000008, 0x2c800048, + 0x00000008, 0x2d000068, 0x00000008, 0x2d800104, 0x00000000, 0x00000000, + 0x00000010, 0x91de0000, 0x00000000, 0x27f60000, 0x00000010, 0xb87a9e04, + 0x00000008, 0x2200000d, 0x00000018, 0x800000e2, 0x00000010, 0x20530000, + 0x00000018, 0x8000fe18, 0x0000000c, 0x29800001, 0x00000010, 0x91de0000, + 0x00000000, 0x2fd50000, 0x00000010, 0x001f0000, 0x00000000, 0x02700000, + 0x00000000, 0x0d620000, 0x00000000, 0xbb630800, 0x00000000, 0x2a000000, + 0x00000010, 0x0e670011, 0x00000000, 0x286d0000, 0x0000000f, 0x65ed0010, + 0x00000009, 0x266dffff, 0x00000004, 0xb8f1a000, 0x00000000, 0x0f400000, + 0x0000000c, 0x73e7001c, 0x00000018, 0x80000040, 0x00000008, 0x02000004, + 0x00000010, 0x91c40802, 0x00000018, 0x800000cd, 0x00000000, 0x2c1e0000, + 0x00000008, 0x2c8000b8, 0x00000008, 0x2d000010, 0x00000008, 0x2d800048, + 0x00000010, 0x20530000, 0x00000010, 0x91de0000, 0x00000018, 0x8000fdfe, + 0x0000000c, 0x29800001, 0x00000000, 0x03550000, 0x00000000, 0x06460000, + 0x00000000, 0x03d60000, 0x00000000, 0x2a000000, 0x0000000f, 0x0f480007, + 0x00000010, 0xb18c0027, 0x0000000f, 0x47420008, 0x00000009, 0x070e000f, + 0x00000008, 0x070e0008, 0x00000010, 0x001f0000, 0x00000008, 0x09000001, + 0x00000007, 0x09121c00, 0x00000003, 0xcbca9200, 0x00000000, 0x0b97a200, + 0x00000007, 0x4b171c00, 0x0000000f, 0x0a960003, 0x00000000, 0x0a959c00, + 0x00000000, 0x4a009a00, 0x00000008, 0x82120001, 0x00000001, 0x0c170800, + 0x00000000, 0x02180000, 0x00000000, 0x0c971800, 0x00000008, 0x0d00ffff, + 0x00000008, 0x0f800006, 0x0000000c, 0x29000000, 0x00000008, 0x22000001, + 0x00000000, 0x22c50c00, 0x00000010, 0x009f0000, 0x00000010, 0xb197320b, + 0x00000000, 0x231b0000, 0x00000000, 0x27110800, 0x00000000, 0x66900000, + 0x00000018, 0x800000a4, 0x00000000, 0x02180000, 0x00000010, 0x20530000, + 0x00000000, 0x22c53600, 0x00000010, 0x001f0000, 0x00000008, 0x0f800006, + 0x00000018, 0x8000fff5, 0x00000010, 0x91870002, 0x00000008, 0x2200000a, + 0x00000000, 0x231b0000, 0x00000000, 0x27110800, 0x00000000, 0x66900000, + 0x00000018, 0x80000098, 0x00000008, 0x0200000a, 0x00000010, 0x91c40804, + 0x00000010, 0x02c20003, 0x00000010, 0x001f0000, 0x00000008, 0x0f800008, + 0x00000010, 0x20530000, 0x00000018, 0x8000fdc9, 0x00000000, 0x06820000, + 0x00000010, 0x001f0000, 0x00000010, 0x0ce70028, 0x00000000, 0x03720000, + 0x00000000, 0xa8760c00, 0x00000000, 0x0cf60000, 0x00000010, 0xb8723224, + 0x00000000, 0x03440000, 0x00000008, 0x22000010, 0x00000000, 0x03ca0000, + 0x0000000f, 0x65680010, 0x00000000, 0x0bcf0000, 0x00000000, 0x27f20000, + 0x00000010, 0xb7ef3203, 0x0000000c, 0x21420004, 0x0000000c, 0x73e70019, + 0x00000000, 0x07520000, 0x00000000, 0x29000000, 0x00000018, 0x8000007e, + 0x00000004, 0xb9723200, 0x00000010, 0x20530000, 0x00000000, 0x22060000, + 0x0000000c, 0x61420004, 0x00000000, 0x25070000, 0x00000000, 0x27970000, + 0x00000000, 0x290e0000, 0x00000010, 0x0ce70010, 0x00000010, 0xb873320f, + 0x0000000f, 0x436c0010, 0x00000000, 0x03f30c00, 0x00000000, 0x03f30000, + 0x00000000, 0x83990e00, 0x00000001, 0x83860e00, 0x00000000, 0x83060e00, + 0x00000003, 0xf66c0c00, 0x00000000, 0x39f30e00, 0x00000000, 0x3af50e00, + 0x00000000, 0x7a740000, 0x0000000f, 0x43680010, 0x00000001, 0x83860e00, + 0x00000000, 0x83060e00, 0x00000003, 0xf4680c00, 0x00000000, 0x286d0000, + 0x00000000, 0x03690000, 0x00000010, 0xb1f60c54, 0x00000000, 0x0a6a0000, + 0x00000000, 0x0aeb0000, 0x00000009, 0x0b6cffff, 0x00000000, 0x0c000000, + 0x00000000, 0x0be90000, 0x00000003, 0x8cf6a000, 0x0000000c, 0x09800002, + 0x00000010, 0x009f0000, 0x00000010, 0xb8173209, 0x00000000, 0x35140000, + 0x00000000, 0x35950000, 0x00000005, 0x766c2c00, 0x00000000, 0x34970000, + 0x00000004, 0xb8f12e00, 0x00000010, 0x001f0000, 0x00000008, 0x0f800004, + 0x00000018, 0x8000fff7, 0x00000000, 0x03e90000, 0x00000010, 0xb8f6a01a, + 0x00000010, 0x20130019, 0x00000010, 0xb1f10e18, 0x00000000, 0x83973200, + 0x00000000, 0x38700e00, 0x00000000, 0xbb760e00, 0x00000000, 0x37d00000, + 0x0000000c, 0x73e7001a, 0x00000003, 0xb8f1a000, 0x00000000, 0x32140000, + 0x00000000, 0x32950000, 0x00000005, 0x73e72c00, 0x00000000, 0x33190000, + 0x00000005, 0x74680000, 0x00000010, 0x0ce7000d, 0x00000008, 0x22000009, + 0x00000000, 0x07520000, 0x00000000, 0x29000000, 0x0000000c, 0x73e70019, + 0x0000000f, 0x65680010, 0x0000000c, 0x21420004, 0x00000018, 0x8000003c, + 0x00000010, 0x20530000, 0x0000000c, 0x61420004, 0x00000000, 0x290e0000, + 0x00000018, 0x80000002, 0x00000010, 0x91973206, 0x00000000, 0x35140000, + 0x00000000, 0x35950000, 0x00000005, 0x766c2c00, 0x00000000, 0x34990000, + 0x00000004, 0xb8f13200, 0x00000000, 0x83690c00, 0x00000010, 0xb1860013, + 0x00000000, 0x28e90000, 0x00000008, 0x22000004, 0x00000000, 0x23ec0000, + 0x00000000, 0x03690000, 0x00000010, 0xb8660c07, 0x00000009, 0x036cffff, + 0x00000000, 0x326a0000, 0x00000000, 0x32eb0000, 0x00000005, 0x73e70c00, + 0x00000000, 0x33690000, 0x00000005, 0x74680000, 0x0000000c, 0x73e7001c, + 0x00000000, 0x03690000, 0x00000010, 0xb1f60c12, 0x00000010, 0xb1d00c11, + 0x0000000c, 0x21420005, 0x0000000c, 0x33e7001c, 0x00000018, 0x8000000e, + 0x00000010, 0x2e67000d, 0x00000000, 0x03690000, 0x00000010, 0xb1f60c0b, + 0x00000010, 0xb1d00c0a, 0x00000000, 0x03440000, 0x00000008, 0x2200000c, + 0x00000000, 0x07520000, 0x00000000, 0x29000000, 0x00000018, 0x80000015, + 0x0000000c, 0x33e7001c, 0x00000010, 0x20530000, 0x00000000, 0x22060000, + 0x00000000, 0x290e0000, 0x00000018, 0x000d0000, 0x00000000, 0x06820000, + 0x00000010, 0x2de7000d, 0x00000010, 0x0ce7000c, 0x00000000, 0x27f20000, + 0x00000010, 0xb96d9e0a, 0x00000000, 0xa86d9e00, 0x00000009, 0x0361ffff, + 0x00000010, 0xb7500c07, 0x00000008, 0x2200000f, 0x0000000f, 0x65680010, + 0x00000000, 0x29000000, 0x00000018, 0x80000004, 0x0000000c, 0x33e7001b, + 0x00000010, 0x20530000, 0x00000018, 0x000d0000, 0x00000000, 0x2b820000, + 0x00000010, 0x20d2002f, 0x00000010, 0x0052002e, 0x00000009, 0x054e0007, + 0x00000010, 0xb18a002c, 0x00000000, 0x050a8c00, 0x00000008, 0x850a0008, + 0x00000010, 0x918a0029, 0x00000003, 0xc5008800, 0x00000008, 0xa3460001, + 0x00000010, 0xb1c60007, 0x00000008, 0x22000001, 0x0000000c, 0x29800000, + 0x00000010, 0x20530000, 0x00000000, 0x274e8c00, 0x00000000, 0x66cd0000, + 0x00000000, 0x22c58c00, 0x00000008, 0x22000014, 0x00000003, 0x22c58e00, + 0x00000003, 0x23c58e00, 0x00000003, 0x22c58e00, 0x00000003, 0x26cd9e00, + 0x00000003, 0x27cd9e00, 0x00000003, 0x26cd9e00, 0x00000003, 0x274ea000, + 0x00000003, 0x284ea000, 0x00000003, 0x274ea000, 0x0000000c, 0x69520000, + 0x0000000c, 0x29800000, 0x00000010, 0x20530000, 0x00000003, 0x22c58e00, + 0x00000003, 0x23c58e00, 0x00000003, 0x22c58e00, 0x00000003, 0x26cd9e00, + 0x00000003, 0x27cd9e00, 0x00000003, 0x26cd9e00, 0x00000003, 0x274ea000, + 0x00000003, 0x284ea000, 0x00000003, 0x274ea000, 0x00000000, 0xa2c58c00, + 0x00000000, 0xa74e8c00, 0x00000000, 0xe6cd0000, 0x0000000f, 0x620a0010, + 0x00000008, 0x23460001, 0x0000000c, 0x29800000, 0x00000010, 0x20530000, + 0x0000000c, 0x29520000, 0x00000018, 0x80000002, 0x0000000c, 0x29800000, + 0x00000018, 0x00570000 }; + +static int bnx2_TPAT_b06FwReleaseMajor = 0x0; +static int bnx2_TPAT_b06FwReleaseMinor = 0x0; +static int bnx2_TPAT_b06FwReleaseFix = 0x0; +static u32 bnx2_TPAT_b06FwStartAddr = 0x08000858; +static u32 bnx2_TPAT_b06FwTextAddr = 0x08000800; +static int bnx2_TPAT_b06FwTextLen = 0x1314; +static u32 bnx2_TPAT_b06FwDataAddr = 0x08001b40; +static int bnx2_TPAT_b06FwDataLen = 0x0; +static u32 bnx2_TPAT_b06FwRodataAddr = 0x00000000; +static int bnx2_TPAT_b06FwRodataLen = 0x0; +static u32 bnx2_TPAT_b06FwBssAddr = 0x08001b90; +static int bnx2_TPAT_b06FwBssLen = 0x80; +static u32 bnx2_TPAT_b06FwSbssAddr = 0x08001b40; +static int bnx2_TPAT_b06FwSbssLen = 0x48; + +static u32 bnx2_TPAT_b06FwText[(0x1314/4) + 1] = { + 0x0a000216, 0x00000000, 0x00000000, 0x0000000d, 0x74706174, 0x20302e36, + 0x2e390000, 0x00060901, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x10000003, + 0x00000000, 0x0000000d, 0x0000000d, 0x3c020800, 0x24421b40, 0x3c030800, + 0x24631c10, 0xac400000, 0x0043202b, 0x1480fffd, 0x24420004, 0x3c1d0800, + 0x37bd3ffc, 0x03a0f021, 0x3c100800, 0x26100858, 0x3c1c0800, 0x279c1b40, + 0x0e00051f, 0x00000000, 0x0000000d, 0x8f820024, 0x27bdffe8, 0xafbf0014, + 0x10400004, 0xafb00010, 0x0000000d, 0x00000000, 0x2400015f, 0x8f82001c, + 0x8c450008, 0x24030800, 0xaf430178, 0x97430104, 0x3c020008, 0xaf420140, + 0x8f820034, 0x30420001, 0x10400006, 0x3070ffff, 0x24020002, 0x2603fffe, + 0xa7420146, 0x0a000246, 0xa7430148, 0xa7400146, 0x8f850034, 0x30a20020, + 0x0002102b, 0x00021023, 0x30460009, 0x30a30c00, 0x24020400, 0x14620002, + 0x34c40001, 0x34c40005, 0xa744014a, 0x3c020800, 0x8c440820, 0x3c030048, + 0x24020002, 0x00832025, 0x30a30006, 0x1062000d, 0x2c620003, 0x50400005, + 0x24020004, 0x10600012, 0x3c020001, 0x0a000271, 0x00000000, 0x10620007, + 0x24020006, 0x1462000f, 0x3c020111, 0x0a000269, 0x00821025, 0x0a000268, + 0x3c020101, 0x3c020011, 0x00821025, 0x24030001, 0xaf421000, 0xaf830030, + 0x0a000271, 0x00000000, 0x00821025, 0xaf421000, 0xaf800030, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x8f830030, 0x1060003f, 0x3c048000, + 0x8f421000, 0x00441024, 0x1040fffd, 0x00000000, 0x10600039, 0x00000000, + 0x8f421000, 0x3c030020, 0x00431024, 0x10400034, 0x00000000, 0x97421014, + 0x14400031, 0x00000000, 0x97421008, 0x8f84001c, 0x24420006, 0x00024082, + 0x00081880, 0x00643821, 0x8ce50000, 0x30430003, 0x30420001, 0x10400004, + 0x00000000, 0x0000000d, 0x0a0002b0, 0x00081080, 0x5460000f, 0x30a5ffff, + 0x3c06ffff, 0x00a62824, 0x0005182b, 0x00a61026, 0x0002102b, 0x00621824, + 0x10600004, 0x00000000, 0x0000000d, 0x00000000, 0x240001fc, 0x8ce20000, + 0x0a0002af, 0x00462825, 0x0005182b, 0x38a2ffff, 0x0002102b, 0x00621824, + 0x10600004, 0x00000000, 0x0000000d, 0x00000000, 0x24000206, 0x8ce20000, + 0x3445ffff, 0x00081080, 0x00441021, 0x3c030800, 0xac450000, 0x8c620840, + 0x24420001, 0xac620840, 0x8f820008, 0x10400003, 0x00000000, 0x0e000660, + 0x00000000, 0x8f840028, 0x02002821, 0x24820008, 0x30421fff, 0x24434000, + 0x0343d821, 0x30a30007, 0xaf840018, 0xaf820028, 0xaf420084, 0x10600002, + 0x24a20007, 0x3045fff8, 0x8f820044, 0x8f840004, 0x00451821, 0xaf82002c, + 0x0064102b, 0xaf830044, 0x14400002, 0x00641023, 0xaf820044, 0x8f840044, + 0x34028000, 0x8fbf0014, 0x8fb00010, 0x00821021, 0x03421821, 0x3c021000, + 0xaf83001c, 0xaf440080, 0xaf420178, 0x03e00008, 0x27bd0018, 0x8f820024, + 0x27bdffe8, 0xafbf0014, 0x10400004, 0xafb00010, 0x0000000d, 0x00000000, + 0x24000249, 0x8f85001c, 0x24020001, 0xaf820024, 0x8ca70008, 0xa3800023, + 0x8f620004, 0x3c100800, 0x26041b90, 0x00021402, 0xa3820010, 0x304600ff, + 0x24c60005, 0x0e00064a, 0x00063082, 0x8f640004, 0x8f430108, 0x3c021000, + 0x00621824, 0xa7840020, 0x10600008, 0x00000000, 0x97420104, 0x93830023, + 0x2442ffec, 0x34630002, 0xa3830023, 0x0a000304, 0x3045ffff, 0x97420104, + 0x2442fff0, 0x3045ffff, 0x8f620004, 0x3042ffff, 0x2c420013, 0x14400004, + 0x00000000, 0x93820023, 0x34420001, 0xa3820023, 0x93830023, 0x24020001, + 0x10620009, 0x28620002, 0x14400014, 0x24020002, 0x10620012, 0x24020003, + 0x1062000a, 0x00000000, 0x0a000325, 0x00000000, 0x8f82001c, 0x8c43000c, + 0x3c04ffff, 0x00641824, 0x00651825, 0x0a000325, 0xac43000c, 0x8f82001c, + 0x8c430010, 0x3c04ffff, 0x00641824, 0x00651825, 0xac430010, 0x8f620004, + 0x3042ffff, 0x24420002, 0x00021083, 0xa3820038, 0x304500ff, 0x8f82001c, + 0x3c04ffff, 0x00052880, 0x00a22821, 0x8ca70000, 0x97820020, 0x97430104, + 0x00e42024, 0x24420002, 0x00621823, 0x00833825, 0xaca70000, 0x93840038, + 0x26061b90, 0x00041080, 0x00461021, 0x90430000, 0x3063000f, 0x00832021, + 0xa3840022, 0x308200ff, 0x3c04fff6, 0x24420003, 0x00021080, 0x00461021, + 0x8c450000, 0x93830022, 0x8f82001c, 0x3484ffff, 0x00a43824, 0x00031880, + 0x00621821, 0xaf850000, 0xac67000c, 0x93820022, 0x93830022, 0x8f84001c, + 0x24420003, 0x00021080, 0x00461021, 0x24630004, 0x00031880, 0xac470000, + 0x93820022, 0x00661821, 0x94670002, 0x00021080, 0x00441021, 0xac670000, + 0x24030010, 0xac470010, 0xa7430140, 0x24030002, 0xa7400142, 0xa7400144, + 0xa7430146, 0x97420104, 0x8f840034, 0x24030001, 0x2442fffe, 0x30840006, + 0xa7420148, 0x24020002, 0xa743014a, 0x1082000d, 0x2c820003, 0x10400005, + 0x24020004, 0x10800011, 0x3c020009, 0x0a000383, 0x00000000, 0x10820007, + 0x24020006, 0x1482000d, 0x3c020119, 0x0a00037d, 0x24030001, 0x0a00037c, + 0x3c020109, 0x3c020019, 0x24030001, 0xaf421000, 0xaf830030, 0x0a000383, + 0x00000000, 0xaf421000, 0xaf800030, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x93820010, 0x24030008, 0x8f840030, 0x24420002, 0x30420007, + 0x00621823, 0x30630007, 0xaf83000c, 0x10800005, 0x3c038000, 0x8f421000, + 0x00431024, 0x1040fffd, 0x00000000, 0x8f820028, 0xaf820018, 0x24420010, + 0x30421fff, 0xaf820028, 0xaf420084, 0x97430104, 0x24424000, 0x0342d821, + 0x3063ffff, 0x30620007, 0x10400002, 0x24620007, 0x3043fff8, 0x8f820044, + 0x8f840004, 0x00431821, 0xaf82002c, 0x0064102b, 0xaf830044, 0x14400002, + 0x00641023, 0xaf820044, 0x8f840044, 0x34028000, 0x8fbf0014, 0x8fb00010, + 0x00821021, 0x03421821, 0x3c021000, 0xaf83001c, 0xaf440080, 0xaf420178, + 0x03e00008, 0x27bd0018, 0x8f820024, 0x27bdffe8, 0xafbf0014, 0x14400004, + 0xafb00010, 0x0000000d, 0x00000000, 0x240002db, 0x8f620004, 0x04410009, + 0x3c050800, 0x93820022, 0x8f830000, 0x24a41b90, 0xaf800024, 0x24420003, + 0x00021080, 0x00441021, 0xac430000, 0x93820038, 0x24a51b90, 0x93860010, + 0x3c040001, 0x27700008, 0x24420001, 0x00021080, 0x00451021, 0x8c430000, + 0x24c60005, 0x00063082, 0x00641821, 0x02002021, 0x0e00064a, 0xac430000, + 0x93840022, 0x3c057fff, 0x8f620004, 0x00042080, 0x00902021, 0x8c830004, + 0x34a5ffff, 0x00451024, 0x00621821, 0xac830004, 0x93850038, 0x3c07ffff, + 0x93840010, 0x00052880, 0x00b02821, 0x8ca30000, 0x97420104, 0x97860020, + 0x00671824, 0x00441021, 0x00461023, 0x3042ffff, 0x00621825, 0xaca30000, + 0x93830023, 0x24020001, 0x10620009, 0x28620002, 0x1440001a, 0x24020002, + 0x10620018, 0x24020003, 0x1062000d, 0x00000000, 0x0a000411, 0x00000000, + 0x93820010, 0x97430104, 0x8e04000c, 0x00621821, 0x2463fff2, 0x3063ffff, + 0x00872024, 0x00832025, 0x0a000411, 0xae04000c, 0x93820010, 0x97430104, + 0x8e040010, 0x00621821, 0x2463ffee, 0x3063ffff, 0x00872024, 0x00832025, + 0xae040010, 0x9783000e, 0x8f840034, 0x2402000a, 0xa7420140, 0xa7430142, + 0x93820010, 0xa7420144, 0xa7400146, 0x97430104, 0x30840006, 0x24020001, + 0xa7430148, 0xa742014a, 0x24020002, 0x1082000d, 0x2c820003, 0x10400005, + 0x24020004, 0x10800011, 0x3c020041, 0x0a000437, 0x00000000, 0x10820007, + 0x24020006, 0x1482000d, 0x3c020151, 0x0a000431, 0x24030001, 0x0a000430, + 0x3c020141, 0x3c020051, 0x24030001, 0xaf421000, 0xaf830030, 0x0a000437, + 0x00000000, 0xaf421000, 0xaf800030, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x8f820030, 0x93840010, 0x8f850028, 0x10400005, 0x3c038000, + 0x8f421000, 0x00431024, 0x1040fffd, 0x00000000, 0x2483000a, 0x30620007, + 0x10400002, 0x24620007, 0x304303f8, 0x00a31021, 0x30421fff, 0xaf850018, + 0xaf820028, 0xaf420084, 0x97430104, 0x24424000, 0x0342d821, 0x3063ffff, + 0x30620007, 0x10400002, 0x24620007, 0x3043fff8, 0x8f820044, 0x8f840004, + 0x00431821, 0xaf82002c, 0x0064102b, 0xaf830044, 0x14400002, 0x00641023, + 0xaf820044, 0x8f840044, 0x34028000, 0x8fbf0014, 0x8fb00010, 0x00821021, + 0x03421821, 0x3c021000, 0xaf83001c, 0xaf440080, 0xaf420178, 0x03e00008, + 0x27bd0018, 0x3c026000, 0x8c444448, 0x3c030800, 0xac64082c, 0x8f620000, + 0x97430104, 0x3c048000, 0x3046ffff, 0x3067ffff, 0x8f420178, 0x00441024, + 0x1440fffd, 0x2402000a, 0x30c30007, 0xa7420140, 0x24020008, 0x00431023, + 0x30420007, 0x24c3fffe, 0xa7420142, 0xa7430144, 0xa7400146, 0xa7470148, + 0x8f420108, 0x3c036000, 0x8f850034, 0x30420020, 0x0002102b, 0x00021023, + 0x30420009, 0x34420001, 0xa742014a, 0x8c644448, 0x3c020800, 0x30a50006, + 0xac440830, 0x24020002, 0x10a2000d, 0x2ca20003, 0x10400005, 0x24020004, + 0x10a00011, 0x3c020041, 0x0a0004a8, 0x00000000, 0x10a20007, 0x24020006, + 0x14a2000d, 0x3c020151, 0x0a0004a2, 0x24030001, 0x0a0004a1, 0x3c020141, + 0x3c020051, 0x24030001, 0xaf421000, 0xaf830030, 0x0a0004a8, 0x00000000, + 0xaf421000, 0xaf800030, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x8f820030, 0x24c30008, 0x10400006, 0x30e6ffff, 0x3c048000, 0x8f421000, + 0x00441024, 0x1040fffd, 0x00000000, 0x3c026000, 0x8c444448, 0x3065ffff, + 0x3c020800, 0x30a30007, 0x10600003, 0xac440834, 0x24a20007, 0x3045fff8, + 0x8f840028, 0x00851021, 0x30421fff, 0x24434000, 0x0343d821, 0x30c30007, + 0xaf840018, 0xaf820028, 0xaf420084, 0x10600002, 0x24c20007, 0x3046fff8, + 0x8f820044, 0x8f840004, 0x00461821, 0xaf82002c, 0x0064102b, 0xaf830044, + 0x14400002, 0x00641023, 0xaf820044, 0x8f840044, 0x34028000, 0x3c030800, + 0x8c650844, 0x00821021, 0x03421821, 0xaf83001c, 0xaf440080, 0x10a00006, + 0x2402000e, 0x93830043, 0x14620004, 0x3c021000, 0x2402043f, 0xa7420148, + 0x3c021000, 0x3c036000, 0xaf420178, 0x8c644448, 0x3c020800, 0x03e00008, + 0xac440838, 0x8f820034, 0x30424000, 0x10400005, 0x24020800, 0x0000000d, + 0x00000000, 0x24000405, 0x24020800, 0xaf420178, 0x97440104, 0x3c030008, + 0xaf430140, 0x8f820034, 0x30420001, 0x10400006, 0x3085ffff, 0x24020002, + 0x24a3fffe, 0xa7420146, 0x0a0004ff, 0xa7430148, 0xa7400146, 0x8f840028, + 0x2402000d, 0xa742014a, 0x24830008, 0x30631fff, 0x24624000, 0x0342d821, + 0x30a20007, 0xaf840018, 0xaf830028, 0xaf430084, 0x10400002, 0x24a20007, + 0x3045fff8, 0x8f820044, 0x8f840004, 0x00451821, 0xaf82002c, 0x0064102b, + 0xaf830044, 0x14400002, 0x00641023, 0xaf820044, 0x8f840044, 0x34028000, + 0x00821021, 0x03421821, 0x3c021000, 0xaf83001c, 0xaf440080, 0x03e00008, + 0xaf420178, 0x27bdffe8, 0x3c046008, 0xafbf0014, 0xafb00010, 0x8c825000, + 0x3c1a8000, 0x2403ff7f, 0x375b4000, 0x00431024, 0x3442380c, 0xac825000, + 0x8f430008, 0x3c100800, 0x37428000, 0x34630001, 0xaf430008, 0xaf82001c, + 0x3c02601c, 0xaf800028, 0xaf400080, 0xaf400084, 0x8c450008, 0x3c036000, + 0x8c620808, 0x3c040800, 0x3c030080, 0xac830820, 0x3042fff0, 0x38420010, + 0x2c420001, 0xaf850004, 0xaf820008, 0x0e00062f, 0x00000000, 0x8f420000, + 0x30420001, 0x1040fffb, 0x00000000, 0x8f440108, 0x30822000, 0xaf840034, + 0x10400004, 0x8e02083c, 0x24420001, 0x0a00059d, 0xae02083c, 0x30820200, + 0x10400027, 0x00000000, 0x97420104, 0x1040001c, 0x30824000, 0x14400005, + 0x00000000, 0x0e00022d, 0x00000000, 0x0a000592, 0x00000000, 0x8f620008, + 0x8f630000, 0x24020030, 0x00031e02, 0x306300f0, 0x10620007, 0x28620031, + 0x14400031, 0x24020040, 0x10620007, 0x00000000, 0x0a000592, 0x00000000, + 0x0e0002dd, 0x00000000, 0x0a000592, 0x00000000, 0x0e0003b8, 0x00000000, + 0x0a000592, 0x00000000, 0x30820040, 0x1440002d, 0x00000000, 0x0000000d, + 0x00000000, 0x240004a6, 0x0a00059d, 0x00000000, 0x8f430100, 0x24020d00, + 0x1462000f, 0x30820006, 0x97420104, 0x10400005, 0x30820040, 0x0e0004e9, + 0x00000000, 0x0a000592, 0x00000000, 0x1440001b, 0x00000000, 0x0000000d, + 0x00000000, 0x240004b8, 0x0a00059d, 0x00000000, 0x1040000e, 0x30821000, + 0x10400005, 0x00000000, 0x0e00065d, 0x00000000, 0x0a000592, 0x00000000, + 0x0e00046b, 0x00000000, 0x8f820040, 0x24420001, 0xaf820040, 0x0a00059d, + 0x00000000, 0x30820040, 0x14400004, 0x00000000, 0x0000000d, 0x00000000, + 0x240004cf, 0x8f420138, 0x3c034000, 0x00431025, 0xaf420138, 0x0a00053f, + 0x00000000, 0x3c046008, 0x8c835000, 0x3c1a8000, 0x2402ff7f, 0x375b4000, + 0x00621824, 0x3463380c, 0xac835000, 0x8f420008, 0x3c056000, 0x3c03601c, + 0x34420001, 0xaf420008, 0x37428000, 0xaf800028, 0xaf82001c, 0xaf400080, + 0xaf400084, 0x8c660008, 0x8ca20808, 0x3c040800, 0x3c030080, 0xac830820, + 0x3042fff0, 0x38420010, 0x2c420001, 0xaf860004, 0xaf820008, 0x03e00008, + 0x00000000, 0x3084ffff, 0x30820007, 0x10400002, 0x24820007, 0x3044fff8, + 0x8f820028, 0x00441821, 0x30631fff, 0x24644000, 0x0344d821, 0xaf820018, + 0xaf830028, 0x03e00008, 0xaf430084, 0x3084ffff, 0x30820007, 0x10400002, + 0x24820007, 0x3044fff8, 0x8f820044, 0x8f830004, 0x00442021, 0xaf82002c, + 0x0083102b, 0xaf840044, 0x14400002, 0x00831023, 0xaf820044, 0x8f820044, + 0x34038000, 0x00431821, 0x03432021, 0xaf84001c, 0x03e00008, 0xaf420080, + 0x8f830034, 0x24020002, 0x30630006, 0x1062000d, 0x2c620003, 0x50400005, + 0x24020004, 0x10600012, 0x3c020001, 0x0a000601, 0x00000000, 0x10620007, + 0x24020006, 0x1462000f, 0x3c020111, 0x0a0005f9, 0x00821025, 0x0a0005f8, + 0x3c020101, 0x3c020011, 0x00821025, 0x24030001, 0xaf421000, 0xaf830030, + 0x0a000601, 0x00000000, 0x00821025, 0xaf421000, 0xaf800030, 0x00000000, + 0x00000000, 0x00000000, 0x03e00008, 0x00000000, 0x8f820030, 0x10400005, + 0x3c038000, 0x8f421000, 0x00431024, 0x1040fffd, 0x00000000, 0x03e00008, + 0x00000000, 0x8f820034, 0x27bdffe8, 0x30424000, 0x14400005, 0xafbf0010, + 0x0e00022d, 0x00000000, 0x0a00062d, 0x8fbf0010, 0x8f620008, 0x8f630000, + 0x24020030, 0x00031e02, 0x306300f0, 0x10620008, 0x28620031, 0x1440000d, + 0x8fbf0010, 0x24020040, 0x10620007, 0x00000000, 0x0a00062d, 0x00000000, + 0x0e0002dd, 0x00000000, 0x0a00062d, 0x8fbf0010, 0x0e0003b8, 0x00000000, + 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x8f84003c, 0x1080000f, 0x3c026000, + 0x8c430c3c, 0x30630fff, 0xaf830014, 0x14600011, 0x3082000f, 0x10400005, + 0x308200f0, 0x10400003, 0x30820f00, 0x14400006, 0x00000000, 0x0000000d, + 0x00000000, 0x2400050e, 0x03e00008, 0x00000000, 0x0000000d, 0x00000000, + 0x24000513, 0x03e00008, 0x00000000, 0xaf83003c, 0x03e00008, 0x00000000, + 0x10c00007, 0x00000000, 0x8ca20000, 0x24c6ffff, 0x24a50004, 0xac820000, + 0x14c0fffb, 0x24840004, 0x03e00008, 0x00000000, 0x0a000659, 0x00a01021, + 0xac860000, 0x24840004, 0x00a01021, 0x1440fffc, 0x24a5ffff, 0x03e00008, + 0x00000000, 0x0000000d, 0x03e00008, 0x00000000, 0x3c040800, 0x8c82084c, + 0x54400007, 0xac80084c, 0x8f820034, 0x24030400, 0x30420c00, 0x1443005b, + 0x00000000, 0xac80084c, 0x0000000d, 0x00000000, 0x2400003c, 0x3c026000, + 0x8c444448, 0x3c030800, 0xac640850, 0x24000043, 0x97420104, 0x3045ffff, + 0x000530c2, 0x24a2007f, 0x000239c2, 0x2400004e, 0x3c046020, 0x24030020, + 0xac830000, 0x8c820000, 0x30420020, 0x10400005, 0x3c036020, 0x8c620000, + 0x30420020, 0x1440fffd, 0x00000000, 0x3c026020, 0x8c430010, 0x24040001, + 0x0087102b, 0x30ea007f, 0x24abfffe, 0x10400010, 0x00034240, 0x3c056020, + 0x24090020, 0xaca90000, 0x8ca20000, 0x30420020, 0x10400006, 0x24840001, + 0x3c036020, 0x8c620000, 0x30420020, 0x1440fffd, 0x00000000, 0x0087102b, + 0x1440fff4, 0x00000000, 0x8f85001c, 0x3c026020, 0x8c430010, 0x3c046020, + 0x34848000, 0x006a1825, 0x01034025, 0x2400006b, 0x10c0000b, 0x00000000, + 0x8ca30000, 0x24a50004, 0x8ca20000, 0x24a50004, 0x24c6ffff, 0xac820000, + 0x24840004, 0xac830000, 0x14c0fff7, 0x24840004, 0x24000077, 0x3c020007, + 0x34427700, 0x3c036000, 0xac6223c8, 0xac6b23cc, 0xac6823e4, 0x24000086, + 0x3c046000, 0x3c038000, 0x8c8223f8, 0x00431024, 0x1440fffd, 0x3c021000, + 0x3c056000, 0x24030019, 0xaca223f8, 0xa743014a, 0x8ca44448, 0x3c020800, + 0xac440854, 0x03e00008, 0x00000000, 0x00000000 }; + +static u32 bnx2_TPAT_b06FwData[(0x0/4) + 1] = { 0x00000000 }; +static u32 bnx2_TPAT_b06FwRodata[(0x0/4) + 1] = { 0x00000000 }; +static u32 bnx2_TPAT_b06FwBss[(0x80/4) + 1] = { 0x00000000 }; +static u32 bnx2_TPAT_b06FwSbss[(0x48/4) + 1] = { 0x00000000 }; + +static int bnx2_TXP_b06FwReleaseMajor = 0x0; +static int bnx2_TXP_b06FwReleaseMinor = 0x0; +static int bnx2_TXP_b06FwReleaseFix = 0x0; +static u32 bnx2_TXP_b06FwStartAddr = 0x08002090; +static u32 bnx2_TXP_b06FwTextAddr = 0x08000000; +static int bnx2_TXP_b06FwTextLen = 0x3ffc; +static u32 bnx2_TXP_b06FwDataAddr = 0x08004020; +static int bnx2_TXP_b06FwDataLen = 0x0; +static u32 bnx2_TXP_b06FwRodataAddr = 0x00000000; +static int bnx2_TXP_b06FwRodataLen = 0x0; +static u32 bnx2_TXP_b06FwBssAddr = 0x08004060; +static int bnx2_TXP_b06FwBssLen = 0x194; +static u32 bnx2_TXP_b06FwSbssAddr = 0x08004020; +static int bnx2_TXP_b06FwSbssLen = 0x34; +static u32 bnx2_TXP_b06FwText[(0x3ffc/4) + 1] = { + 0x0a000824, 0x00000000, 0x00000000, 0x0000000d, 0x74787020, 0x302e362e, + 0x39000000, 0x00060900, 0x0000000a, 0x000003e8, 0x0000ea60, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x10000003, 0x00000000, 0x0000000d, + 0x0000000d, 0x3c020800, 0x24424020, 0x3c030800, 0x246341f4, 0xac400000, + 0x0043202b, 0x1480fffd, 0x24420004, 0x3c1d0800, 0x37bd7ffc, 0x03a0f021, + 0x3c100800, 0x26102090, 0x3c1c0800, 0x279c4020, 0x0e000a0e, 0x00000000, + 0x0000000d, 0x8f840014, 0x27bdffe8, 0xafb00010, 0x8f460104, 0x8f830008, + 0x8c8500ac, 0xaf430080, 0x948200a8, 0xa7420e10, 0x948300aa, 0xa7430e12, + 0x8c8200ac, 0xaf420e18, 0x97430e10, 0xa7430e14, 0x97420e12, 0xa7420e16, + 0x8f430e18, 0x00005021, 0x00c53023, 0x10c001a3, 0xaf430e1c, 0x240f0800, + 0x3c0e1000, 0x2419fff8, 0x24100010, 0x3c188100, 0x93620008, 0x10400009, + 0x00000000, 0x97620010, 0x00c2102b, 0x14400005, 0x00000000, 0x97620010, + 0x3042ffff, 0x0a000862, 0xaf420e00, 0xaf460e00, 0x8f420000, 0x30420008, + 0x1040fffd, 0x00000000, 0x97420e08, 0x8f450e04, 0x3044ffff, 0x30820001, + 0x14400005, 0x00000000, 0x14a00005, 0x3083a040, 0x0a0009e6, 0x00000000, + 0x0000000d, 0x3083a040, 0x24020040, 0x14620049, 0x3082a000, 0x8f87000c, + 0x30880036, 0x30890008, 0xaf4f0178, 0x00e01821, 0x9742008a, 0x00431023, + 0x2442ffff, 0x30421fff, 0x2c420008, 0x1440fffa, 0x00000000, 0x8f830018, + 0x00a05021, 0x00c53023, 0x24e24000, 0x03422821, 0x306b00ff, 0x24630001, + 0xaf830018, 0x93840012, 0x000b1400, 0x3c030100, 0x00431025, 0xaca20000, + 0x8f820018, 0x30840007, 0x00042240, 0x34870001, 0x00e83825, 0x1120000f, + 0xaca20004, 0x97430e0a, 0x8f84000c, 0x00ee3825, 0x2402000e, 0x00781825, + 0xaf430160, 0x25430006, 0x24840008, 0x30841fff, 0xa742015a, 0xa7430158, + 0xaf84000c, 0x0a0008a9, 0x00000000, 0x8f83000c, 0x25420002, 0xa7420158, + 0x24630008, 0x30631fff, 0xaf83000c, 0x54c0000c, 0x8f420e14, 0x97420e10, + 0x97430e12, 0x8f840014, 0x00021400, 0x00621825, 0xac8300a8, 0x8f850014, + 0x8f420e18, 0x34e70040, 0xaca200ac, 0x8f420e14, 0x8f430e1c, 0xaf420144, + 0xaf430148, 0xa34b0152, 0xaf470154, 0x0a0009f1, 0xaf4e0178, 0x10400128, + 0x00000000, 0x97620010, 0x00a2102b, 0x10400003, 0x30820040, 0x10400122, + 0x00000000, 0xafa60008, 0xa7840010, 0xaf850004, 0x93620008, 0x1440005e, + 0x27ac0008, 0xaf60000c, 0x97820010, 0x30424000, 0x10400002, 0x2403000e, + 0x24030016, 0xa363000a, 0x24034007, 0xaf630014, 0x93820012, 0x8f630014, + 0x30420007, 0x00021240, 0x00621825, 0xaf630014, 0x97820010, 0x8f630014, + 0x30420010, 0x00621825, 0xaf630014, 0x97820010, 0x30420008, 0x5040000e, + 0x00002821, 0x8f620014, 0x004e1025, 0xaf620014, 0x97430e0a, 0x2402000e, + 0x00781825, 0xaf630004, 0xa3620002, 0x9363000a, 0x3405fffc, 0x24630004, + 0x0a0008f2, 0xa363000a, 0xaf600004, 0xa3600002, 0x97820010, 0x9363000a, + 0x30421f00, 0x00021182, 0x24420028, 0x00621821, 0xa3630009, 0x97420e0c, + 0xa7620010, 0x93630009, 0x24020008, 0x24630002, 0x30630007, 0x00431023, + 0x30420007, 0xa362000b, 0x93640009, 0x97620010, 0x8f890004, 0x97830010, + 0x00441021, 0x00a21021, 0x30630040, 0x10600006, 0x3045ffff, 0x15250005, + 0x0125102b, 0x3c068000, 0x0a000925, 0x00005821, 0x0125102b, 0x144000c8, + 0x00005021, 0x97420e14, 0xa7420e10, 0x97430e16, 0xa7430e12, 0x8f420e1c, + 0xaf420e18, 0xaf450e00, 0x8f420000, 0x30420008, 0x1040fffd, 0x00000000, + 0x97420e08, 0x00a04821, 0xa7820010, 0x8f430e04, 0x00003021, 0x240b0001, + 0xaf830004, 0x97620010, 0x0a000936, 0x304dffff, 0x8f890004, 0x97820010, + 0x30420040, 0x10400004, 0x01206821, 0x3c068000, 0x0a000936, 0x00005821, + 0x97630010, 0x8f820004, 0x144300a7, 0x00005021, 0x00003021, 0x240b0001, + 0x8d820000, 0x00491023, 0x1440000d, 0xad820000, 0x8f620014, 0x34420040, + 0xaf620014, 0x97430e10, 0x97420e12, 0x8f840014, 0x00031c00, 0x00431025, + 0xac8200a8, 0x8f830014, 0x8f420e18, 0xac6200ac, 0x93620008, 0x1440003f, + 0x00000000, 0x25260002, 0x8f84000c, 0x9743008a, 0x3063ffff, 0xafa30000, + 0x8fa20000, 0x00441023, 0x2442ffff, 0x30421fff, 0x2c420010, 0x1440fff7, + 0x00000000, 0x8f82000c, 0x8f830018, 0x00021082, 0x00021080, 0x24424000, + 0x03422821, 0x00605021, 0x24630001, 0x314200ff, 0x00021400, 0xaf830018, + 0x3c033200, 0x00431025, 0xaca20000, 0x93630009, 0x9362000a, 0x00031c00, + 0x00431025, 0xaca20004, 0x8f830018, 0xaca30008, 0x97820010, 0x30420008, + 0x10400002, 0x00c04021, 0x25280006, 0x97430e14, 0x93640002, 0x8f450e1c, + 0x8f660004, 0x8f670014, 0xaf4f0178, 0x3063ffff, 0xa7430144, 0x97420e16, + 0xa7420146, 0xaf450148, 0xa34a0152, 0x8f82000c, 0x308400ff, 0xa744015a, + 0xaf460160, 0xa7480158, 0xaf470154, 0xaf4e0178, 0x00501021, 0x30421fff, + 0xaf82000c, 0x0a0009c5, 0x8d820000, 0x93620009, 0x9363000b, 0x8f85000c, + 0x2463000a, 0x00435021, 0x25440007, 0x00992024, 0x9743008a, 0x3063ffff, + 0xafa30000, 0x8fa20000, 0x00451023, 0x2442ffff, 0x30421fff, 0x0044102b, + 0x1440fff7, 0x00000000, 0x8f82000c, 0x8f840018, 0x00021082, 0x00021080, + 0x24424000, 0x03422821, 0x00804021, 0x24840001, 0xaf840018, 0x93630009, + 0x310200ff, 0x00022400, 0x3c024100, 0x24630002, 0x00621825, 0x00832025, + 0xaca40000, 0x8f62000c, 0x00461025, 0xaca20004, 0x97430e14, 0x93640002, + 0x8f450e1c, 0x8f660004, 0x8f670014, 0xaf4f0178, 0x3063ffff, 0xa7430144, + 0x97420e16, 0x308400ff, 0xa7420146, 0xaf450148, 0xa3480152, 0x8f83000c, + 0x25420007, 0x00591024, 0xa744015a, 0xaf460160, 0xa7490158, 0xaf470154, + 0xaf4e0178, 0x00621821, 0x30631fff, 0xaf83000c, 0x8d820000, 0x14400005, + 0x00000000, 0x8f620014, 0x2403ffbf, 0x00431024, 0xaf620014, 0x8f62000c, + 0x004d1021, 0xaf62000c, 0x93630008, 0x14600008, 0x00000000, 0x11600006, + 0x00000000, 0x8f630014, 0x3c02efff, 0x3442fffe, 0x00621824, 0xaf630014, + 0xa36b0008, 0x01205021, 0x15400016, 0x8fa60008, 0x97420e14, 0x97430e16, + 0x8f850014, 0x00021400, 0x00621825, 0xaca300a8, 0x8f840014, 0x8f420e1c, + 0x0a0009f3, 0xac8200ac, 0x97420e14, 0x97430e16, 0x8f840014, 0x00021400, + 0x00621825, 0xac8300a8, 0x8f850014, 0x8f420e1c, 0x00005021, 0x0a0009f3, + 0xaca200ac, 0x14c0fe64, 0x00000000, 0x55400018, 0x8fb00010, 0x3c038000, + 0x8f420178, 0x00431024, 0x1440fffd, 0x00000000, 0x97430e14, 0x8f440e1c, + 0x24020800, 0xaf420178, 0x3063ffff, 0xa7430144, 0x97420e16, 0x3c031000, + 0xa7420146, 0x24020240, 0xaf440148, 0xa3400152, 0xa740015a, 0xaf400160, + 0xa7400158, 0xaf420154, 0xaf430178, 0x8fb00010, 0x03e00008, 0x27bd0018, + 0x27bdffd8, 0x3c1a8000, 0x3c0420ff, 0x3484fffd, 0x3c020008, 0x03421821, + 0xafbf0020, 0xafb3001c, 0xafb20018, 0xafb10014, 0xafb00010, 0xaf830014, + 0xaf440e00, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x3c0200ff, 0x3442fffd, 0x3c046004, 0xaf420e00, 0x8c835000, 0x24130d00, + 0x3c120800, 0x3c114000, 0x2402ff7f, 0x00621824, 0x3463380c, 0x24020009, + 0xac835000, 0xaf420008, 0xaf800018, 0xaf80000c, 0x0e000fa1, 0x00000000, + 0x0e000a96, 0x00000000, 0x3c020800, 0x24504080, 0x8f420000, 0x30420001, + 0x1040fffd, 0x00000000, 0x8f440100, 0xaf840008, 0xaf440020, 0x93430108, + 0xa3830012, 0x93820012, 0x30420001, 0x10400008, 0x00000000, 0x93820012, + 0x30420006, 0x00021100, 0x0e00083b, 0x0050d821, 0x0a000a52, 0x00000000, + 0x14930005, 0x00000000, 0x0e00083b, 0x265b4100, 0x0a000a52, 0x00000000, + 0x0e000ba3, 0x00000000, 0xaf510138, 0x0a000a36, 0x00000000, 0x27bdfff8, + 0x3084ffff, 0x24820007, 0x3044fff8, 0x8f85000c, 0x9743008a, 0x3063ffff, + 0xafa30000, 0x8fa20000, 0x00451023, 0x2442ffff, 0x30421fff, 0x0044102b, + 0x1440fff7, 0x00000000, 0x8f82000c, 0x00021082, 0x00021080, 0x24424000, + 0x03421021, 0x03e00008, 0x27bd0008, 0x3084ffff, 0x8f82000c, 0x24840007, + 0x3084fff8, 0x00441021, 0x30421fff, 0xaf82000c, 0x03e00008, 0x00000000, + 0x27bdffe8, 0x3c1a8000, 0x3c0420ff, 0x3484fffd, 0x3c020008, 0x03421821, + 0xafbf0010, 0xaf830014, 0xaf440e00, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x3c0200ff, 0x3442fffd, 0x3c046004, 0xaf420e00, + 0x8c825000, 0x2403ff7f, 0x00431024, 0x3442380c, 0x24030009, 0xac825000, + 0xaf430008, 0xaf800018, 0xaf80000c, 0x0e000fa1, 0x00000000, 0x0e000a96, + 0x00000000, 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x27bdffe8, 0x3c02000a, + 0x03421821, 0x3c040800, 0x24844120, 0x24050018, 0xafbf0010, 0xaf830024, + 0x0e000fad, 0x00003021, 0x3c050800, 0x3c020800, 0x24423d60, 0xaca24180, + 0x24a54180, 0x3c020800, 0x24423e18, 0x3c030800, 0x24633e2c, 0x3c040800, + 0xaca20004, 0x3c020800, 0x24423d68, 0xaca30008, 0xac824190, 0x24844190, + 0x3c020800, 0x24423da4, 0x3c070800, 0x24e73de4, 0x3c060800, 0x24c63e40, + 0x3c050800, 0x24a52b28, 0x3c030800, 0xac820004, 0x3c020800, 0x24423e48, + 0xac870008, 0xac86000c, 0xac850010, 0xac6241b0, 0x246341b0, 0x8fbf0010, + 0x3c020800, 0x24423e60, 0xac620004, 0xac670008, 0xac66000c, 0xac650010, + 0x03e00008, 0x27bd0018, 0x27bdffc8, 0x3c020800, 0x24424120, 0xafbf0030, + 0xafb3002c, 0xafb20028, 0xafb10024, 0xafb00020, 0x90470021, 0x8c510008, + 0x8c45001c, 0x8f900020, 0x3c060800, 0x3c038000, 0x8f420178, 0x00431024, + 0x1440fffd, 0x8cc2414c, 0x24c3414c, 0x2473ffd4, 0xaf420144, 0x8e620030, + 0x30b22000, 0xaf420148, 0x3c021000, 0xaf50014c, 0xa3470152, 0xa7510158, + 0xaf450154, 0xaf420178, 0x12400004, 0x3c030800, 0x8c620030, 0x24420001, + 0xac620030, 0x93420109, 0x9344010a, 0x00111c00, 0xafa30018, 0x00071a00, + 0xafa50014, 0x8cc5414c, 0x00021600, 0x00042400, 0x00441025, 0x00431025, + 0xafa20010, 0x8f440100, 0x8e660030, 0x0e000fe1, 0x02003821, 0x1640000e, + 0x8fbf0030, 0x8f820000, 0x8e630030, 0x8c44017c, 0x02031823, 0x00711823, + 0x00641823, 0x2c630002, 0x14600006, 0x8fb3002c, 0x0000000d, 0x00000000, + 0x240000ca, 0x8fbf0030, 0x8fb3002c, 0x8fb20028, 0x8fb10024, 0x8fb00020, + 0x03e00008, 0x27bd0038, 0x974309da, 0x00804021, 0xad030000, 0x8f4209dc, + 0xad020004, 0x8f4309e0, 0xad030008, 0x934409d9, 0x24020001, 0x30840003, + 0x1082001f, 0x30a900ff, 0x28820002, 0x10400005, 0x24020002, 0x10800009, + 0x3c0a0800, 0x0a000b64, 0x93420934, 0x1082000b, 0x24020003, 0x10820026, + 0x3c0a0800, 0x0a000b64, 0x93420934, 0x974209e4, 0x00021400, 0x34420800, + 0xad02000c, 0x0a000b63, 0x25080010, 0x974209e4, 0x00021400, 0x34428100, + 0xad02000c, 0x974309e8, 0x3c0a0800, 0x00031c00, 0x34630800, 0xad030010, + 0x0a000b63, 0x25080014, 0x974409e4, 0x3c050800, 0x24a24120, 0x94430018, + 0x94460010, 0x9447000c, 0x00a05021, 0x24020800, 0xad000010, 0xad020014, + 0x00042400, 0x00661821, 0x00671823, 0x2463fff2, 0x00832025, 0xad04000c, + 0x0a000b63, 0x25080018, 0x974209e4, 0x3c050800, 0x00021400, 0x34428100, + 0xad02000c, 0x974409e8, 0x24a24120, 0x94430018, 0x94460010, 0x9447000c, + 0x00a05021, 0x24020800, 0xad000014, 0xad020018, 0x00042400, 0x00661821, + 0x00671823, 0x2463ffee, 0x00832025, 0xad040010, 0x2508001c, 0x93420934, + 0x93450921, 0x3c074000, 0x25444120, 0x94830014, 0x94860010, 0x00021082, + 0x00021600, 0x00052c00, 0x00a72825, 0x00451025, 0x00661821, 0x00431025, + 0xad020000, 0x97830028, 0x974209ea, 0x00621821, 0x00031c00, 0xad030004, + 0x97820028, 0x24420001, 0x30427fff, 0xa7820028, 0x93430920, 0x3c020006, + 0x00031e00, 0x00621825, 0xad030008, 0x8f42092c, 0xad02000c, 0x8f430930, + 0xad030010, 0x8f440938, 0x25080014, 0xad040000, 0x8f820020, 0x11200004, + 0xad020004, 0x8f420940, 0x0a000b8d, 0x2442ffff, 0x8f420940, 0xad020008, + 0x8f440948, 0x8f420940, 0x93430936, 0x00822823, 0x00652806, 0x3402ffff, + 0x0045102b, 0x54400001, 0x3405ffff, 0x93420937, 0x25444120, 0x90830020, + 0xad000010, 0x00021700, 0x34630010, 0x00031c00, 0x00431025, 0x00451025, + 0xad02000c, 0x03e00008, 0x25020014, 0x27bdffb0, 0x3c020008, 0x03421821, + 0xafbf004c, 0xafbe0048, 0xafb70044, 0xafb60040, 0xafb5003c, 0xafb40038, + 0xafb30034, 0xafb20030, 0xafb1002c, 0xafb00028, 0xaf830000, 0x24020040, + 0xaf420814, 0xaf400810, 0x8f420944, 0x8f430950, 0x8f440954, 0x8f45095c, + 0xaf820030, 0xaf830020, 0xaf84001c, 0xaf85002c, 0x93430900, 0x24020020, + 0x10620005, 0x24020030, 0x10620022, 0x3c030800, 0x0a000bf1, 0x8c62002c, + 0x24020088, 0xaf420818, 0x3c020800, 0x24424180, 0xafa20020, 0x93430109, + 0x3c020800, 0x10600009, 0x24574190, 0x3c026000, 0x24030100, 0xac43081c, + 0x3c030001, 0xac43081c, 0x0000000d, 0x00000000, 0x2400031d, 0x9342010a, + 0x30420080, 0x1440001c, 0x00000000, 0x3c026000, 0x24030100, 0xac43081c, + 0x3c030001, 0xac43081c, 0x0000000d, 0x00000000, 0x24000324, 0x0a000bf4, + 0x00000000, 0x93430109, 0x3063007f, 0x00031140, 0x000318c0, 0x00431021, + 0x24430088, 0xaf430818, 0x0000000d, 0x3c020800, 0x244241d0, 0x3c030800, + 0x247741e0, 0x0a000bf4, 0xafa20020, 0x24420001, 0x0a000f4c, 0xac62002c, + 0x8f840000, 0x8f850020, 0x24020800, 0xaf420178, 0x8f4209a4, 0x8c83017c, + 0x00a21023, 0x00431023, 0x2c420002, 0x14400004, 0x00000000, 0x0000000d, + 0x00000000, 0x24000349, 0x8f420104, 0x8f430988, 0x00431023, 0x58400005, + 0x8f4209a0, 0x0000000d, 0x00000000, 0x2400034d, 0x8f4209a0, 0x3c100800, + 0xae02414c, 0x8f4309a4, 0x2604414c, 0x2491ffd4, 0xae230030, 0x8f420104, + 0xae250024, 0x00431023, 0xac82ffd4, 0x8fa30020, 0x8c620000, 0x0040f809, + 0x0200b021, 0x00409021, 0x32440010, 0x32420002, 0x10400007, 0xafa40024, + 0x8e22001c, 0x32500040, 0x2403ffbf, 0x00431024, 0x0a000f13, 0xae22001c, + 0x32420020, 0x10400002, 0x3c020800, 0x245741b0, 0x32420001, 0x14400007, + 0x00000000, 0x8f820008, 0xaf420080, 0x8ec3414c, 0xaf430e10, 0x8e220030, + 0xaf420e18, 0x9343010b, 0x93420905, 0x30420008, 0x1040003c, 0x307400ff, + 0x8f820000, 0x8c430074, 0x0460000a, 0x00000000, 0x3c026000, 0x24030100, + 0xac43081c, 0x3c030001, 0xac43081c, 0x0000000d, 0x00000000, 0x24000384, + 0x8f820000, 0x9044007b, 0x9343010a, 0x14830027, 0x32500040, 0x24072000, + 0x3c090800, 0x3c038000, 0x8f420178, 0x00431024, 0x1440fffd, 0x8ec2414c, + 0x26c4414c, 0x2484ffd4, 0xaf420144, 0x8c820030, 0x3c030100, 0xaf420148, + 0x24020047, 0xaf43014c, 0x00001821, 0xa3420152, 0x3c021000, 0xa7430158, + 0xaf470154, 0xaf420178, 0x8ec5414c, 0x8d230030, 0x8c860030, 0x24630001, + 0xad230030, 0x93420109, 0x9343010a, 0xafa70014, 0xafa00018, 0x00021600, + 0x00031c00, 0x00431025, 0x34424700, 0xafa20010, 0x8f440100, 0x0e000fe1, + 0x3c070100, 0x3c030800, 0x24624120, 0x0a000d01, 0x8c43001c, 0x32820002, + 0x10400047, 0x3c039000, 0x34630001, 0x8f820008, 0x32500040, 0x3c048000, + 0x00431025, 0xaf420020, 0x8f420020, 0x00441024, 0x1440fffd, 0x00000000, + 0x8f830000, 0x90620005, 0x3c058000, 0x34420008, 0xa0620005, 0x8f860000, + 0x34a50001, 0x8f840008, 0x8cc20074, 0x3c038000, 0x00852025, 0x00431025, + 0xacc20074, 0xaf440020, 0x90c3007b, 0x9342010a, 0x14620028, 0x3c040800, + 0x24072000, 0x3c090800, 0x3c038000, 0x8f420178, 0x00431024, 0x1440fffd, + 0x8ec2414c, 0x26c4414c, 0x2484ffd4, 0xaf420144, 0x8c820030, 0x3c030100, + 0xaf420148, 0x24020046, 0xaf43014c, 0x00001821, 0xa3420152, 0x3c021000, + 0xa7430158, 0xaf470154, 0xaf420178, 0x8ec5414c, 0x8d230030, 0x8c860030, + 0x24630001, 0xad230030, 0x93420109, 0x9343010a, 0xafa70014, 0xafa00018, + 0x00021600, 0x00031c00, 0x00431025, 0x34424600, 0xafa20010, 0x8f440100, + 0x0e000fe1, 0x3c070100, 0x3c040800, 0x24824120, 0x0a000d01, 0x8c43001c, + 0x93420108, 0x30420010, 0x50400050, 0x9343093f, 0x8f860000, 0x90c3007f, + 0x90c2007e, 0x90c40080, 0x306800ff, 0x00021600, 0x00081c00, 0x00431025, + 0x00042200, 0x90c3007a, 0x90c5000a, 0x00441025, 0x11050028, 0x00623825, + 0xa0c8000a, 0x24086000, 0x3c090800, 0x3c038000, 0x8f420178, 0x00431024, + 0x1440fffd, 0x8ec2414c, 0x26c4414c, 0x2484ffd4, 0xaf420144, 0x8c820030, + 0x00001821, 0xaf420148, 0x24020052, 0xaf47014c, 0xa3420152, 0x3c021000, + 0xa7430158, 0xaf480154, 0xaf420178, 0x8ec5414c, 0x8d230030, 0x8c860030, + 0x24630001, 0xad230030, 0x93420109, 0x9343010a, 0xafa80014, 0xafa00018, + 0x00021600, 0x00031c00, 0x00431025, 0x34425200, 0xafa20010, 0x0e000fe1, + 0x8f440100, 0x0a000cfb, 0x00000000, 0x3c026000, 0x24030100, 0xac43081c, + 0x3c030001, 0xac43081c, 0x0000000d, 0x00000000, 0x240003cd, 0x16800009, + 0x3c040800, 0x3c030800, 0x24624120, 0x8c43001c, 0x32500040, 0x2404ffbf, + 0x00641824, 0x0a000f13, 0xac43001c, 0x8c824120, 0x10400005, 0x3c030800, + 0x8c620034, 0xac804120, 0x24420001, 0xac620034, 0x9343093f, 0x24020012, + 0x1462000f, 0x329e0038, 0x17c0000c, 0x3c030800, 0x8f830000, 0x8c62004c, + 0xac62005c, 0x3c020800, 0x24444120, 0x8c82001c, 0x32500040, 0x2403ffbf, + 0x00431024, 0x0a000f13, 0xac82001c, 0xac604120, 0x97420908, 0x000211c0, + 0xaf420024, 0x97420908, 0x3c030080, 0x34630003, 0x000211c0, 0xaf42080c, + 0xaf43081c, 0x974209ec, 0x8f4309a4, 0xa7820028, 0x3c020800, 0x24444120, + 0xac830028, 0x93420937, 0x93430934, 0x00021080, 0x00621821, 0xa4830014, + 0x934209d8, 0x00621821, 0xa4830016, 0x934209d8, 0x93430934, 0x00809821, + 0x00431021, 0x24420010, 0xa4820012, 0x0000a821, 0x24020006, 0x13c00003, + 0xae62001c, 0x0a000d82, 0x24120008, 0x8f420958, 0x8f830020, 0x8f84002c, + 0x00431023, 0x00832023, 0x04800003, 0xae620004, 0x04410003, 0x0082102b, + 0x0a000d4e, 0xae600004, 0x54400001, 0xae640004, 0x8ee20000, 0x0040f809, + 0x00000000, 0x00409021, 0x32420001, 0x5440001e, 0x8ee20004, 0x8e630008, + 0x1060002b, 0x3c02c000, 0x00621025, 0xaf420e00, 0x8f420000, 0x30420008, + 0x1040fffd, 0x00000000, 0x97420e08, 0xa7820010, 0x8f430e04, 0x8e620008, + 0xaf830004, 0x8f840004, 0x0044102b, 0x1040000b, 0x24150001, 0x24020100, + 0x3c016000, 0xac22081c, 0x3c020001, 0x3c016000, 0xac22081c, 0x0000000d, + 0x00000000, 0x24000449, 0x24150001, 0x8ee20004, 0x0040f809, 0x00000000, + 0x02429025, 0x32420002, 0x5040001d, 0x8f470940, 0x12a00006, 0x8ec2414c, + 0x8f830000, 0xac6200a8, 0x8f840000, 0x8e620030, 0xac8200ac, 0x32420004, + 0x50400013, 0x8f470940, 0x3c020800, 0x3283007d, 0x106000fe, 0x245741b0, + 0x32820001, 0x50400006, 0x36520002, 0x8f830030, 0x8f420940, 0x106200f7, + 0x00000000, 0x36520002, 0x24020008, 0xa660000c, 0xa662000e, 0xae600008, + 0xa2600020, 0x8f470940, 0x3c030800, 0x24684120, 0x8d020028, 0x8d050008, + 0x9504000c, 0x9506000a, 0x95030022, 0x00451021, 0x00862021, 0x00641821, + 0xaf870030, 0xad020028, 0x32820030, 0x10400006, 0xa5030010, 0x91020020, + 0x32910040, 0x34420004, 0x0a000dd4, 0xa1020020, 0x93420923, 0x30420040, + 0x10400029, 0x32910040, 0x8f830000, 0x8f840020, 0x8c620084, 0x00441023, + 0x0442000a, 0x3c039000, 0x95020010, 0x8c630084, 0x00821021, 0x00621823, + 0x1c600004, 0x3c039000, 0x91020020, 0x34420001, 0xa1020020, 0x34630001, + 0x8f820008, 0x32910040, 0x3c048000, 0x00431025, 0xaf420020, 0x8f420020, + 0x00441024, 0x1440fffd, 0x00000000, 0x8f840000, 0x9083003f, 0x2402000a, + 0x10620005, 0x2402000c, 0x9083003f, 0x24020008, 0x14620002, 0x24020014, + 0xa082003f, 0x8f830008, 0x3c028000, 0x34420001, 0x00621825, 0xaf430020, + 0x3c040800, 0x24904120, 0x9602000c, 0x96030016, 0x9604000e, 0x00431021, + 0x00442021, 0x24840002, 0x3084ffff, 0x0e000a55, 0xa6020018, 0x8f850018, + 0x00a01821, 0xa2030021, 0x8ee60008, 0x00402021, 0x24a50001, 0xaf850018, + 0x00c0f809, 0x00000000, 0x00402021, 0x0e000b12, 0x02202821, 0x8ee3000c, + 0x0060f809, 0x00402021, 0x96040018, 0x9602000e, 0x00822021, 0x24840002, + 0x0e000a6b, 0x3084ffff, 0x3c030800, 0x8c624120, 0x8e030008, 0x3c040800, + 0x00431023, 0x14400012, 0xac824120, 0x54600006, 0x8e02001c, 0x3243004a, + 0x24020002, 0x14620005, 0x00000000, 0x8e02001c, 0x34420040, 0x0a000e0b, + 0xae02001c, 0x52a00006, 0x36520002, 0x8e02002c, 0xaf420e10, 0x8e030030, + 0xaf430e18, 0x36520002, 0x52a00008, 0x96670010, 0x8f830000, 0x8f420e10, + 0xac6200a8, 0x8f840000, 0x8f420e18, 0xac8200ac, 0x96670010, 0x92680020, + 0x24020040, 0xaf420814, 0x8f830020, 0x8f82001c, 0x00671821, 0x00621023, + 0xaf830020, 0x58400005, 0x8f42095c, 0x8f820000, 0xaf83001c, 0xac430054, + 0x8f42095c, 0x31030008, 0xaf82002c, 0x1060001a, 0x00000000, 0x8f840000, + 0x90820120, 0x90830121, 0x304600ff, 0x00c31823, 0x30630007, 0x24020007, + 0x1062000e, 0x00000000, 0x90820122, 0x304200fe, 0xa0820122, 0x8f850000, + 0x00061880, 0x8f840020, 0x24a20100, 0x00431021, 0x24c30001, 0x30630007, + 0xac440000, 0x0a000e40, 0xa0a30120, 0x90820122, 0x34420001, 0xa0820122, + 0x14e00003, 0x31020001, 0x10400031, 0x32510002, 0x8f820000, 0x8c43000c, + 0x30630001, 0x1060002c, 0x32510002, 0x3c029000, 0x8f830008, 0x34420001, + 0x3c048000, 0x00621825, 0xaf430020, 0x8f420020, 0x00441024, 0x1440fffd, + 0x00000000, 0x8f870000, 0x8ce2000c, 0x30420001, 0x10400018, 0x00000000, + 0x94e2006a, 0x00022880, 0x50a00001, 0x24050001, 0x94e30068, 0x90e40081, + 0x3c020800, 0x8c460024, 0x00652821, 0x00852804, 0x00c5102b, 0x54400001, + 0x00a03021, 0x3c020800, 0x8c440028, 0x00c4182b, 0x54600001, 0x00c02021, + 0x8f430074, 0x2402fffe, 0x00822824, 0x00a31821, 0xace3000c, 0x8f830008, + 0x3c028000, 0x34420001, 0x00621825, 0xaf430020, 0x8f830020, 0x3c020800, + 0x24504120, 0xae030024, 0x8ee20010, 0x0040f809, 0x00000000, 0x12a00005, + 0x00000000, 0x8f420e10, 0xae02002c, 0x8f430e18, 0xae030030, 0x1220feba, + 0x0000a821, 0x8f870024, 0x97860028, 0x8f830000, 0x8f820030, 0x8f840020, + 0x8f85001c, 0x32500040, 0xa4e6002c, 0xac620044, 0x32420008, 0xac640050, + 0xac650054, 0x1040007a, 0x32820020, 0x10400027, 0x32910010, 0x24072000, + 0x3c090800, 0x3c038000, 0x8f420178, 0x00431024, 0x1440fffd, 0x8ec2414c, + 0x26c4414c, 0x2484ffd4, 0xaf420144, 0x8c820030, 0x3c030400, 0xaf420148, + 0x24020041, 0xaf43014c, 0x00001821, 0xa3420152, 0x3c021000, 0xa7430158, + 0xaf470154, 0xaf420178, 0x8ec5414c, 0x8d230030, 0x8c860030, 0x24630001, + 0xad230030, 0x93420109, 0x9343010a, 0xafa70014, 0xafa00018, 0x00021600, + 0x00031c00, 0x00431025, 0x34424100, 0xafa20010, 0x8f440100, 0x0e000fe1, + 0x3c070400, 0x12200028, 0x24072000, 0x3c090800, 0x3c038000, 0x8f420178, + 0x00431024, 0x1440fffd, 0x8ec2414c, 0x26c4414c, 0x2484ffd4, 0xaf420144, + 0x8c820030, 0x3c030300, 0xaf420148, 0x2402004e, 0xaf43014c, 0x00001821, + 0xa3420152, 0x3c021000, 0xa7430158, 0xaf470154, 0xaf420178, 0x8ec5414c, + 0x8d230030, 0x8c860030, 0x24630001, 0xad230030, 0x93420109, 0x9343010a, + 0xafa70014, 0xafa00018, 0x00021600, 0x00031c00, 0x00431025, 0x34424e00, + 0xafa20010, 0x8f440100, 0x0e000fe1, 0x3c070300, 0x0a000f0b, 0x8fa30024, + 0x32820008, 0x10400026, 0x3c090800, 0x24072000, 0x3c038000, 0x8f420178, + 0x00431024, 0x1440fffd, 0x8ec2414c, 0x26c4414c, 0x2484ffd4, 0xaf420144, + 0x8c820030, 0x3c030200, 0xaf420148, 0x2402004b, 0xaf43014c, 0x00001821, + 0xa3420152, 0x3c021000, 0xa7430158, 0xaf470154, 0xaf420178, 0x8ec5414c, + 0x8d230030, 0x8c860030, 0x24630001, 0xad230030, 0x93420109, 0x9343010a, + 0xafa70014, 0xafa00018, 0x00021600, 0x00031c00, 0x00431025, 0x34424b00, + 0xafa20010, 0x8f440100, 0x0e000fe1, 0x3c070200, 0x8fa30024, 0x14600004, + 0x8fa40020, 0x32420010, 0x10400004, 0x00000000, 0x8c820004, 0x0040f809, + 0x00000000, 0x12000006, 0x8fa30020, 0x8c620008, 0x0040f809, 0x00000000, + 0x0a000f4d, 0x8fbf004c, 0x3c030800, 0x8c62413c, 0x30420040, 0x1440002f, + 0x8fbf004c, 0x24040040, 0x8f910020, 0x3c038000, 0x8f420178, 0x00431024, + 0x1440fffd, 0x8ec2414c, 0x26d0414c, 0x2610ffd4, 0xaf420144, 0x8e020030, + 0x00001821, 0xaf420148, 0x24020049, 0xaf51014c, 0xa3420152, 0x3c021000, + 0xa7430158, 0xaf440154, 0xaf420178, 0x8ec5414c, 0x8e060030, 0x93420109, + 0x9343010a, 0xafa40014, 0xafa00018, 0x00021600, 0x00031c00, 0x00431025, + 0x34424900, 0xafa20010, 0x8f440100, 0x0e000fe1, 0x02203821, 0x8f830000, + 0x8e020030, 0x8c64017c, 0x02221023, 0x00441023, 0x2c420002, 0x14400005, + 0x8fbf004c, 0x0000000d, 0x00000000, 0x240000ca, 0x8fbf004c, 0x8fbe0048, + 0x8fb70044, 0x8fb60040, 0x8fb5003c, 0x8fb40038, 0x8fb30034, 0x8fb20030, + 0x8fb1002c, 0x8fb00028, 0x03e00008, 0x27bd0050, 0x03e00008, 0x00001021, + 0x3c030800, 0x24654120, 0x8ca40004, 0x8c634120, 0x0064102b, 0x54400001, + 0x00602021, 0x9743093c, 0x0083102b, 0x54400001, 0x00801821, 0x00001021, + 0xaca30008, 0x03e00008, 0xa4a00022, 0x8f850004, 0x97840010, 0x3c030800, + 0x24634120, 0x24020008, 0xa462000e, 0x8f820004, 0xa460000c, 0x000420c2, + 0x30840008, 0x2c420001, 0x00021023, 0x30420006, 0xac650008, 0x03e00008, + 0xa0640020, 0x3c020800, 0x24424120, 0x90450021, 0x94430018, 0x3c021100, + 0xac800004, 0x00052c00, 0x24630002, 0x00621825, 0x00a32825, 0x24820008, + 0x03e00008, 0xac850000, 0x0000000d, 0x00000000, 0x2400016f, 0x03e00008, + 0x00000000, 0x0000000d, 0x00000000, 0x2400017b, 0x03e00008, 0x00000000, + 0x03e00008, 0x00000000, 0x3c020800, 0x24424120, 0xac400008, 0xa4400022, + 0x03e00008, 0x24020001, 0x3c020800, 0x24424120, 0x24030008, 0xac400008, + 0xa440000c, 0xa443000e, 0xa0400020, 0x03e00008, 0x24020004, 0x03e00008, + 0x00001021, 0x10c00007, 0x00000000, 0x8ca20000, 0x24c6ffff, 0x24a50004, + 0xac820000, 0x14c0fffb, 0x24840004, 0x03e00008, 0x00000000, 0x0a000fb2, + 0x00a01021, 0xac860000, 0x24840004, 0x00a01021, 0x1440fffc, 0x24a5ffff, + 0x03e00008, 0x00000000, 0x3c0a0800, 0x8d490068, 0x3c050800, 0x24a51090, + 0x00093140, 0x00c51021, 0xac440000, 0x8f440e04, 0x00a61021, 0xac440004, + 0x97430e08, 0x97420e0c, 0x00a62021, 0x00031c00, 0x00431025, 0xac820008, + 0x8f430e10, 0x00801021, 0xac43000c, 0x8f440e14, 0xac440010, 0x8f430e18, + 0x3c0800ff, 0xac430014, 0x8f470e1c, 0x3508ffff, 0x25290001, 0xac470018, + 0x3c070800, 0x8ce3006c, 0x9344010a, 0x3c026000, 0x24630001, 0xace3006c, + 0x8c434448, 0x3129007f, 0x00a62821, 0xad490068, 0x00042600, 0x00681824, + 0x00832025, 0x03e00008, 0xaca4001c, 0x8fac0010, 0x8fad0014, 0x8fae0018, + 0x3c0b0800, 0x8d6a0060, 0x3c080800, 0x25080078, 0x000a4940, 0x01281021, + 0x01091821, 0xac440000, 0x00601021, 0xac650004, 0xac460008, 0xac67000c, + 0xac4c0010, 0xac6d0014, 0x3c036000, 0xac4e0018, 0x8c654448, 0x3c040800, + 0x8c820064, 0x254a0001, 0x314a007f, 0x01094021, 0xad6a0060, 0x24420001, + 0xac820064, 0x03e00008, 0xad05001c, 0x00000000 }; + +static u32 bnx2_TXP_b06FwData[(0x0/4) + 1] = { 0x00000000 }; +static u32 bnx2_TXP_b06FwRodata[(0x0/4) + 1] = { 0x00000000 }; +static u32 bnx2_TXP_b06FwBss[(0x194/4) + 1] = { 0x00000000 }; +static u32 bnx2_TXP_b06FwSbss[(0x34/4) + 1] = { 0x00000000 }; + -- cgit v1.2.3 From a7b6459de19c85432f791728317089459316da32 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Fri, 27 May 2005 21:11:33 +0200 Subject: [PATCH] r8169: new PCI id The USR 997902 is based on the 8169 chipset. The value has been extracted from the sources of the driver which comes with the manufacturer's cdrom. Heads-up and test by TommyDrum . Signed-off-by: Francois Romieu --- drivers/net/r8169.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index b3768d84474..d064b5b0d19 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -176,6 +176,7 @@ const static struct { static struct pci_device_id rtl8169_pci_tbl[] = { {0x10ec, 0x8169, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {0x1186, 0x4300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x16ec, 0x0116, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {0,}, }; -- cgit v1.2.3 From 53456f607a7ec02905823dc92a94c7e36d4ded1a Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Fri, 27 May 2005 21:11:37 +0200 Subject: [PATCH] r8169: de-obfuscate supported PCI ID De-obfuscate supported PCI ID Signed-off-by: Francois Romieu --- drivers/net/r8169.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index d064b5b0d19..0f1f81b50c4 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -174,9 +174,9 @@ const static struct { #undef _R static struct pci_device_id rtl8169_pci_tbl[] = { - {0x10ec, 0x8169, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - {0x1186, 0x4300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - {0x16ec, 0x0116, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8169), }, + { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4300), }, + { PCI_DEVICE(0x16ec, 0x0116), }, {0,}, }; -- cgit v1.2.3 From f7ccf420e5d5553d2cb25d21f8bb77e7747f1c35 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 27 May 2005 21:11:41 +0200 Subject: [PATCH] r8169: identify the napi version To tell if driver is configured for NAPI or not, put -NAPI on driver version. Remove the NAPI printk since the complete version information is displayed once in the pci probe routine or returned via ethtool. Signed-off-by: Stephen Hemminger Signed-off-by: Francois Romieu --- drivers/net/r8169.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 0f1f81b50c4..e9592f52350 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -69,7 +69,13 @@ VERSION 2.2LK <2005/01/25> #include #include -#define RTL8169_VERSION "2.2LK" +#ifdef CONFIG_R8169_NAPI +#define NAPI_SUFFIX "-NAPI" +#else +#define NAPI_SUFFIX "" +#endif + +#define RTL8169_VERSION "2.2LK" NAPI_SUFFIX #define MODULENAME "r8169" #define PFX MODULENAME ": " @@ -1367,7 +1373,6 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) #ifdef CONFIG_R8169_NAPI dev->poll = rtl8169_poll; dev->weight = R8169_NAPI_WEIGHT; - printk(KERN_INFO PFX "NAPI enabled\n"); #endif #ifdef CONFIG_R8169_VLAN -- cgit v1.2.3 From 1b7efd58bb2c89f408118888b659b51ff66c47b9 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 27 May 2005 21:11:45 +0200 Subject: [PATCH] r8169: add module parameter (copybreak) Add module parameter description for copybreak. Signed-off-by: Stephen Hemminger Signed-off-by: Francois Romieu --- drivers/net/r8169.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index e9592f52350..bf4bd390976 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -426,6 +426,7 @@ MODULE_AUTHOR("Realtek and the Linux r8169 crew "); MODULE_DESCRIPTION("RealTek RTL-8169 Gigabit Ethernet driver"); module_param_array(media, int, &num_media, 0); module_param(rx_copybreak, int, 0); +MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames"); module_param(use_dac, int, 0); MODULE_PARM_DESC(use_dac, "Enable PCI DAC. Unsafe on 32 bit PCI slot."); MODULE_LICENSE("GPL"); -- cgit v1.2.3 From df0a1bf63403c2decec2c11cdd1b304363174e90 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Fri, 27 May 2005 21:11:49 +0200 Subject: [PATCH] r8169: add module parameter (media) Add module parameter description for the media option. Signed-off-by: Francois Romieu --- drivers/net/r8169.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index bf4bd390976..6f3b1383788 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -425,6 +425,7 @@ struct rtl8169_private { MODULE_AUTHOR("Realtek and the Linux r8169 crew "); MODULE_DESCRIPTION("RealTek RTL-8169 Gigabit Ethernet driver"); module_param_array(media, int, &num_media, 0); +MODULE_PARM_DESC(media, "force phy operation. Deprecated by ethtool (8)."); module_param(rx_copybreak, int, 0); MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames"); module_param(use_dac, int, 0); -- cgit v1.2.3 From b57b7e5a11c4e45565cf34d786d74ad35483fe83 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 27 May 2005 21:11:52 +0200 Subject: [PATCH] r8169: ethtool message level control support Also: - ratelimit the too much work at interrupt message, so if under massive packet load the console doesn't get flooded; - removal of a few PFX used in contexts where dev->name is available; - s/->slot_name/pci_name/; - printed_version is redundant with the debug option. Remove it and let the user decide. Signed-off-by: Stephen Hemminger Signed-off-by: Francois Romieu --- drivers/net/r8169.c | 191 +++++++++++++++++++++++++++++++++++++--------------- 1 file changed, 135 insertions(+), 56 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 6f3b1383788..d795b31649f 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -91,6 +91,10 @@ VERSION 2.2LK <2005/01/25> #define dprintk(fmt, args...) do {} while (0) #endif /* RTL8169_DEBUG */ +#define R8169_MSG_DEFAULT \ + (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | NETIF_MSG_IFUP | \ + NETIF_MSG_IFDOWN) + #define TX_BUFFS_AVAIL(tp) \ (tp->dirty_tx + NUM_TX_DESC - tp->cur_tx - 1) @@ -190,6 +194,9 @@ MODULE_DEVICE_TABLE(pci, rtl8169_pci_tbl); static int rx_copybreak = 200; static int use_dac; +static struct { + u32 msg_enable; +} debug = { -1 }; enum RTL8169_registers { MAC0 = 0, /* Ethernet hardware address. */ @@ -392,6 +399,7 @@ struct rtl8169_private { struct pci_dev *pci_dev; /* Index of PCI device */ struct net_device_stats stats; /* statistics of net device */ spinlock_t lock; /* spin lock flag */ + u32 msg_enable; int chipset; int mac_version; int phy_version; @@ -430,6 +438,8 @@ module_param(rx_copybreak, int, 0); MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames"); module_param(use_dac, int, 0); MODULE_PARM_DESC(use_dac, "Enable PCI DAC. Unsafe on 32 bit PCI slot."); +module_param_named(debug, debug.msg_enable, int, 0); +MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., 16=all)"); MODULE_LICENSE("GPL"); MODULE_VERSION(RTL8169_VERSION); @@ -552,9 +562,13 @@ static void rtl8169_check_link_status(struct net_device *dev, spin_lock_irqsave(&tp->lock, flags); if (tp->link_ok(ioaddr)) { netif_carrier_on(dev); - printk(KERN_INFO PFX "%s: link up\n", dev->name); - } else + if (netif_msg_ifup(tp)) + printk(KERN_INFO PFX "%s: link up\n", dev->name); + } else { + if (netif_msg_ifdown(tp)) + printk(KERN_INFO PFX "%s: link down\n", dev->name); netif_carrier_off(dev); + } spin_unlock_irqrestore(&tp->lock, flags); } @@ -578,7 +592,7 @@ static void rtl8169_link_option(int idx, u8 *autoneg, u16 *speed, u8 *duplex) option = ((idx < MAX_UNITS) && (idx >= 0)) ? media[idx] : 0xff; - if ((option != 0xff) && !idx) + if ((option != 0xff) && !idx && netif_msg_drv(&debug)) printk(KERN_WARNING PFX "media option is deprecated.\n"); for (p = link_settings; p->media != 0xff; p++) { @@ -620,9 +634,11 @@ static int rtl8169_set_speed_tbi(struct net_device *dev, } else if (autoneg == AUTONEG_ENABLE) RTL_W32(TBICSR, reg | TBINwEnable | TBINwRestart); else { - printk(KERN_WARNING PFX - "%s: incorrect speed setting refused in TBI mode\n", - dev->name); + if (netif_msg_link(tp)) { + printk(KERN_WARNING "%s: " + "incorrect speed setting refused in TBI mode\n", + dev->name); + } ret = -EOPNOTSUPP; } @@ -880,12 +896,28 @@ static void rtl8169_get_regs(struct net_device *dev, struct ethtool_regs *regs, spin_unlock_irqrestore(&tp->lock, flags); } +static u32 rtl8169_get_msglevel(struct net_device *dev) +{ + struct rtl8169_private *tp = netdev_priv(dev); + + return tp->msg_enable; +} + +static void rtl8169_set_msglevel(struct net_device *dev, u32 value) +{ + struct rtl8169_private *tp = netdev_priv(dev); + + tp->msg_enable = value; +} + static struct ethtool_ops rtl8169_ethtool_ops = { .get_drvinfo = rtl8169_get_drvinfo, .get_regs_len = rtl8169_get_regs_len, .get_link = ethtool_op_get_link, .get_settings = rtl8169_get_settings, .set_settings = rtl8169_set_settings, + .get_msglevel = rtl8169_get_msglevel, + .set_msglevel = rtl8169_set_msglevel, .get_rx_csum = rtl8169_get_rx_csum, .set_rx_csum = rtl8169_set_rx_csum, .get_tx_csum = ethtool_op_get_tx_csum, @@ -1100,7 +1132,8 @@ static void rtl8169_phy_timer(unsigned long __opaque) if (tp->link_ok(ioaddr)) goto out_unlock; - printk(KERN_WARNING PFX "%s: PHY reset until link up\n", dev->name); + if (netif_msg_link(tp)) + printk(KERN_WARNING "%s: PHY reset until link up\n", dev->name); tp->phy_reset_enable(ioaddr); @@ -1178,18 +1211,23 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, /* dev zeroed in alloc_etherdev */ dev = alloc_etherdev(sizeof (*tp)); if (dev == NULL) { - printk(KERN_ERR PFX "unable to alloc new ethernet\n"); + if (netif_msg_drv(&debug)) + printk(KERN_ERR PFX "unable to alloc new ethernet\n"); goto err_out; } SET_MODULE_OWNER(dev); SET_NETDEV_DEV(dev, &pdev->dev); tp = netdev_priv(dev); + tp->msg_enable = netif_msg_init(debug.msg_enable, R8169_MSG_DEFAULT); /* enable device (incl. PCI PM wakeup and hotplug setup) */ rc = pci_enable_device(pdev); - if (rc) { - printk(KERN_ERR PFX "%s: enable failure\n", pci_name(pdev)); + if (rc < 0) { + if (netif_msg_probe(tp)) { + printk(KERN_ERR PFX "%s: enable failure\n", + pci_name(pdev)); + } goto err_out_free_dev; } @@ -1205,29 +1243,39 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, pci_read_config_word(pdev, pm_cap + PCI_PM_CTRL, &pwr_command); acpi_idle_state = pwr_command & PCI_PM_CTRL_STATE_MASK; } else { - printk(KERN_ERR PFX - "Cannot find PowerManagement capability, aborting.\n"); + if (netif_msg_probe(tp)) { + printk(KERN_ERR PFX + "Cannot find PowerManagement capability. " + "Aborting.\n"); + } goto err_out_mwi; } /* make sure PCI base addr 1 is MMIO */ if (!(pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) { - printk(KERN_ERR PFX - "region #1 not an MMIO resource, aborting\n"); + if (netif_msg_probe(tp)) { + printk(KERN_ERR PFX + "region #1 not an MMIO resource, aborting\n"); + } rc = -ENODEV; goto err_out_mwi; } /* check for weird/broken PCI region reporting */ if (pci_resource_len(pdev, 1) < R8169_REGS_SIZE) { - printk(KERN_ERR PFX "Invalid PCI region size(s), aborting\n"); + if (netif_msg_probe(tp)) { + printk(KERN_ERR PFX + "Invalid PCI region size(s), aborting\n"); + } rc = -ENODEV; goto err_out_mwi; } rc = pci_request_regions(pdev, MODULENAME); - if (rc) { - printk(KERN_ERR PFX "%s: could not request regions.\n", - pci_name(pdev)); + if (rc < 0) { + if (netif_msg_probe(tp)) { + printk(KERN_ERR PFX "%s: could not request regions.\n", + pci_name(pdev)); + } goto err_out_mwi; } @@ -1240,7 +1288,10 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, } else { rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); if (rc < 0) { - printk(KERN_ERR PFX "DMA configuration failed.\n"); + if (netif_msg_probe(tp)) { + printk(KERN_ERR PFX + "DMA configuration failed.\n"); + } goto err_out_free_res; } } @@ -1250,7 +1301,8 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, /* ioremap MMIO region */ ioaddr = ioremap(pci_resource_start(pdev, 1), R8169_REGS_SIZE); if (ioaddr == NULL) { - printk(KERN_ERR PFX "cannot remap MMIO, aborting\n"); + if (netif_msg_probe(tp)) + printk(KERN_ERR PFX "cannot remap MMIO, aborting\n"); rc = -EIO; goto err_out_free_res; } @@ -1281,9 +1333,11 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, } if (i < 0) { /* Unknown chip: assume array element #0, original RTL-8169 */ - printk(KERN_DEBUG PFX - "PCI device %s: unknown chip version, assuming %s\n", - pci_name(pdev), rtl_chip_info[0].name); + if (netif_msg_probe(tp)) { + printk(KERN_DEBUG PFX "PCI device %s: " + "unknown chip version, assuming %s\n", + pci_name(pdev), rtl_chip_info[0].name); + } i++; } tp->chipset = i; @@ -1317,7 +1371,6 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) struct rtl8169_private *tp; void __iomem *ioaddr = NULL; static int board_idx = -1; - static int printed_version = 0; u8 autoneg, duplex; u16 speed; int i, rc; @@ -1327,10 +1380,9 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) board_idx++; - if (!printed_version) { + if (netif_msg_drv(&debug)) { printk(KERN_INFO "%s Gigabit Ethernet driver %s loaded\n", MODULENAME, RTL8169_VERSION); - printed_version = 1; } rc = rtl8169_init_board(pdev, &dev, &ioaddr); @@ -1399,20 +1451,24 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) return rc; } - printk(KERN_DEBUG "%s: Identified chip type is '%s'.\n", dev->name, - rtl_chip_info[tp->chipset].name); + if (netif_msg_probe(tp)) { + printk(KERN_DEBUG "%s: Identified chip type is '%s'.\n", + dev->name, rtl_chip_info[tp->chipset].name); + } pci_set_drvdata(pdev, dev); - printk(KERN_INFO "%s: %s at 0x%lx, " - "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x, " - "IRQ %d\n", - dev->name, - rtl_chip_info[ent->driver_data].name, - dev->base_addr, - dev->dev_addr[0], dev->dev_addr[1], - dev->dev_addr[2], dev->dev_addr[3], - dev->dev_addr[4], dev->dev_addr[5], dev->irq); + if (netif_msg_probe(tp)) { + printk(KERN_INFO "%s: %s at 0x%lx, " + "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x, " + "IRQ %d\n", + dev->name, + rtl_chip_info[ent->driver_data].name, + dev->base_addr, + dev->dev_addr[0], dev->dev_addr[1], + dev->dev_addr[2], dev->dev_addr[3], + dev->dev_addr[4], dev->dev_addr[5], dev->irq); + } rtl8169_hw_phy_config(dev); @@ -1435,7 +1491,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) rtl8169_set_speed(dev, autoneg, speed, duplex); - if (RTL_R8(PHYstatus) & TBI_Enable) + if ((RTL_R8(PHYstatus) & TBI_Enable) && netif_msg_link(tp)) printk(KERN_INFO PFX "%s: TBI auto-negotiating\n", dev->name); return 0; @@ -1868,8 +1924,13 @@ static void rtl8169_reinit_task(void *_data) ret = rtl8169_open(dev); if (unlikely(ret < 0)) { if (net_ratelimit()) { - printk(PFX KERN_ERR "%s: reinit failure (status = %d)." - " Rescheduling.\n", dev->name, ret); + struct rtl8169_private *tp = netdev_priv(dev); + + if (netif_msg_drv(tp)) { + printk(PFX KERN_ERR + "%s: reinit failure (status = %d)." + " Rescheduling.\n", dev->name, ret); + } } rtl8169_schedule_work(dev, rtl8169_reinit_task); } @@ -1894,8 +1955,12 @@ static void rtl8169_reset_task(void *_data) netif_wake_queue(dev); } else { if (net_ratelimit()) { - printk(PFX KERN_EMERG "%s: Rx buffers shortage\n", - dev->name); + struct rtl8169_private *tp = netdev_priv(dev); + + if (netif_msg_intr(tp)) { + printk(PFX KERN_EMERG + "%s: Rx buffers shortage\n", dev->name); + } } rtl8169_schedule_work(dev, rtl8169_reset_task); } @@ -1981,8 +2046,11 @@ static int rtl8169_start_xmit(struct sk_buff *skb, struct net_device *dev) int ret = 0; if (unlikely(TX_BUFFS_AVAIL(tp) < skb_shinfo(skb)->nr_frags)) { - printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n", - dev->name); + if (netif_msg_drv(tp)) { + printk(KERN_ERR + "%s: BUG! Tx Ring full when queue awake!\n", + dev->name); + } goto err_stop; } @@ -2057,8 +2125,11 @@ static void rtl8169_pcierr_interrupt(struct net_device *dev) pci_read_config_word(pdev, PCI_COMMAND, &pci_cmd); pci_read_config_word(pdev, PCI_STATUS, &pci_status); - printk(KERN_ERR PFX "%s: PCI error (cmd = 0x%04x, status = 0x%04x).\n", - dev->name, pci_cmd, pci_status); + if (netif_msg_intr(tp)) { + printk(KERN_ERR + "%s: PCI error (cmd = 0x%04x, status = 0x%04x).\n", + dev->name, pci_cmd, pci_status); + } /* * The recovery sequence below admits a very elaborated explanation: @@ -2077,7 +2148,8 @@ static void rtl8169_pcierr_interrupt(struct net_device *dev) /* The infamous DAC f*ckup only happens at boot time */ if ((tp->cp_cmd & PCIDAC) && !tp->dirty_rx && !tp->cur_rx) { - printk(KERN_INFO PFX "%s: disabling PCI DAC.\n", dev->name); + if (netif_msg_intr(tp)) + printk(KERN_INFO "%s: disabling PCI DAC.\n", dev->name); tp->cp_cmd &= ~PCIDAC; RTL_W16(CPlusCmd, tp->cp_cmd); dev->features &= ~NETIF_F_HIGHDMA; @@ -2199,8 +2271,11 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp, if (status & DescOwn) break; if (status & RxRES) { - printk(KERN_INFO "%s: Rx ERROR. status = %08x\n", - dev->name, status); + if (netif_msg_rx_err(tp)) { + printk(KERN_INFO + "%s: Rx ERROR. status = %08x\n", + dev->name, status); + } tp->stats.rx_errors++; if (status & (RxRWT | RxRUNT)) tp->stats.rx_length_errors++; @@ -2260,7 +2335,7 @@ move_on: tp->cur_rx = cur_rx; delta = rtl8169_rx_fill(tp, dev, tp->dirty_rx, tp->cur_rx); - if (!delta && count) + if (!delta && count && netif_msg_intr(tp)) printk(KERN_INFO "%s: no Rx buffer allocated\n", dev->name); tp->dirty_rx += delta; @@ -2271,7 +2346,7 @@ move_on: * after refill ? * - how do others driver handle this condition (Uh oh...). */ - if (tp->dirty_rx + NUM_RX_DESC == tp->cur_rx) + if ((tp->dirty_rx + NUM_RX_DESC == tp->cur_rx) && netif_msg_intr(tp)) printk(KERN_EMERG "%s: Rx buffers exhausted\n", dev->name); return count; @@ -2323,7 +2398,7 @@ rtl8169_interrupt(int irq, void *dev_instance, struct pt_regs *regs) if (likely(netif_rx_schedule_prep(dev))) __netif_rx_schedule(dev); - else { + else if (netif_msg_intr(tp)) { printk(KERN_INFO "%s: interrupt %04x taken in poll\n", dev->name, status); } @@ -2342,8 +2417,10 @@ rtl8169_interrupt(int irq, void *dev_instance, struct pt_regs *regs) } while (boguscnt > 0); if (boguscnt <= 0) { - printk(KERN_WARNING "%s: Too much work at interrupt!\n", - dev->name); + if (net_ratelimit() && netif_msg_intr(tp)) { + printk(KERN_WARNING + "%s: Too much work at interrupt!\n", dev->name); + } /* Clear all interrupt sources. */ RTL_W16(IntrStatus, 0xffff); } @@ -2466,8 +2543,10 @@ rtl8169_set_rx_mode(struct net_device *dev) if (dev->flags & IFF_PROMISC) { /* Unconditionally log net taps. */ - printk(KERN_NOTICE "%s: Promiscuous mode enabled.\n", - dev->name); + if (netif_msg_link(tp)) { + printk(KERN_NOTICE "%s: Promiscuous mode enabled.\n", + dev->name); + } rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys | AcceptAllPhys; -- cgit v1.2.3 From d4a3a0fc9c2d012093cf75a8d95034966c17e71e Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 27 May 2005 21:11:56 +0200 Subject: [PATCH] r8169: add ethtool support for dumping the chip statistics There aren't lots of statistics available, but this is what is available according to the RealTek documentation. Signed-off-by: Stephen Hemminger Signed-off-by: Francois Romieu --- drivers/net/r8169.c | 100 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 100 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index d795b31649f..b30e13867e1 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -201,6 +201,8 @@ static struct { enum RTL8169_registers { MAC0 = 0, /* Ethernet hardware address. */ MAR0 = 8, /* Multicast filter. */ + CounterAddrLow = 0x10, + CounterAddrHigh = 0x14, TxDescStartAddrLow = 0x20, TxDescStartAddrHigh = 0x24, TxHDescStartAddrLow = 0x28, @@ -342,6 +344,9 @@ enum RTL8169_register_content { /* _TBICSRBit */ TBILinkOK = 0x02000000, + + /* DumpCounterCommand */ + CounterDump = 0x8, }; enum _DescStatusBit { @@ -910,6 +915,98 @@ static void rtl8169_set_msglevel(struct net_device *dev, u32 value) tp->msg_enable = value; } +static const char rtl8169_gstrings[][ETH_GSTRING_LEN] = { + "tx_packets", + "rx_packets", + "tx_errors", + "rx_errors", + "rx_missed", + "align_errors", + "tx_single_collisions", + "tx_multi_collisions", + "unicast", + "broadcast", + "multicast", + "tx_aborted", + "tx_underrun", +}; + +struct rtl8169_counters { + u64 tx_packets; + u64 rx_packets; + u64 tx_errors; + u32 rx_errors; + u16 rx_missed; + u16 align_errors; + u32 tx_one_collision; + u32 tx_multi_collision; + u64 rx_unicast; + u64 rx_broadcast; + u32 rx_multicast; + u16 tx_aborted; + u16 tx_underun; +}; + +static int rtl8169_get_stats_count(struct net_device *dev) +{ + return ARRAY_SIZE(rtl8169_gstrings); +} + +static void rtl8169_get_ethtool_stats(struct net_device *dev, + struct ethtool_stats *stats, u64 *data) +{ + struct rtl8169_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + struct rtl8169_counters *counters; + dma_addr_t paddr; + u32 cmd; + + ASSERT_RTNL(); + + counters = pci_alloc_consistent(tp->pci_dev, sizeof(*counters), &paddr); + if (!counters) + return; + + RTL_W32(CounterAddrHigh, (u64)paddr >> 32); + cmd = (u64)paddr & DMA_32BIT_MASK; + RTL_W32(CounterAddrLow, cmd); + RTL_W32(CounterAddrLow, cmd | CounterDump); + + while (RTL_R32(CounterAddrLow) & CounterDump) { + if (msleep_interruptible(1)) + break; + } + + RTL_W32(CounterAddrLow, 0); + RTL_W32(CounterAddrHigh, 0); + + data[0] = le64_to_cpu(counters->tx_packets); + data[1] = le64_to_cpu(counters->rx_packets); + data[2] = le64_to_cpu(counters->tx_errors); + data[3] = le32_to_cpu(counters->rx_errors); + data[4] = le16_to_cpu(counters->rx_missed); + data[5] = le16_to_cpu(counters->align_errors); + data[6] = le32_to_cpu(counters->tx_one_collision); + data[7] = le32_to_cpu(counters->tx_multi_collision); + data[8] = le64_to_cpu(counters->rx_unicast); + data[9] = le64_to_cpu(counters->rx_broadcast); + data[10] = le32_to_cpu(counters->rx_multicast); + data[11] = le16_to_cpu(counters->tx_aborted); + data[12] = le16_to_cpu(counters->tx_underun); + + pci_free_consistent(tp->pci_dev, sizeof(*counters), counters, paddr); +} + +static void rtl8169_get_strings(struct net_device *dev, u32 stringset, u8 *data) +{ + switch(stringset) { + case ETH_SS_STATS: + memcpy(data, *rtl8169_gstrings, sizeof(rtl8169_gstrings)); + break; + } +} + + static struct ethtool_ops rtl8169_ethtool_ops = { .get_drvinfo = rtl8169_get_drvinfo, .get_regs_len = rtl8169_get_regs_len, @@ -927,6 +1024,9 @@ static struct ethtool_ops rtl8169_ethtool_ops = { .get_tso = ethtool_op_get_tso, .set_tso = ethtool_op_set_tso, .get_regs = rtl8169_get_regs, + .get_strings = rtl8169_get_strings, + .get_stats_count = rtl8169_get_stats_count, + .get_ethtool_stats = rtl8169_get_ethtool_stats, }; static void rtl8169_write_gmii_reg_bit(void __iomem *ioaddr, int reg, int bitnum, -- cgit v1.2.3 From 4dcb7d33770541ae3e65a57351f3875df64e8af6 Mon Sep 17 00:00:00 2001 From: Richard Dawe Date: Fri, 27 May 2005 21:12:00 +0200 Subject: [PATCH] r8169: minor cleanup - more consistent prototypes; - rtl8169_rx_interrupt() o the error condition should be rare; o goto removal. Signed-off-by: Richard Dawe Signed-off-by: Francois Romieu --- drivers/net/r8169.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index b30e13867e1..882c59fe9f8 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -457,10 +457,10 @@ static void rtl8169_hw_start(struct net_device *dev); static int rtl8169_close(struct net_device *dev); static void rtl8169_set_rx_mode(struct net_device *dev); static void rtl8169_tx_timeout(struct net_device *dev); -static struct net_device_stats *rtl8169_get_stats(struct net_device *netdev); +static struct net_device_stats *rtl8169_get_stats(struct net_device *dev); static int rtl8169_rx_interrupt(struct net_device *, struct rtl8169_private *, void __iomem *); -static int rtl8169_change_mtu(struct net_device *netdev, int new_mtu); +static int rtl8169_change_mtu(struct net_device *dev, int new_mtu); static void rtl8169_down(struct net_device *dev); #ifdef CONFIG_R8169_NAPI @@ -2360,7 +2360,7 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp, rx_left = NUM_RX_DESC + tp->dirty_rx - cur_rx; rx_left = rtl8169_rx_quota(rx_left, (u32) dev->quota); - while (rx_left > 0) { + for (; rx_left > 0; rx_left--, cur_rx++) { unsigned int entry = cur_rx % NUM_RX_DESC; struct RxDesc *desc = tp->RxDescArray + entry; u32 status; @@ -2370,7 +2370,7 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp, if (status & DescOwn) break; - if (status & RxRES) { + if (unlikely(status & RxRES)) { if (netif_msg_rx_err(tp)) { printk(KERN_INFO "%s: Rx ERROR. status = %08x\n", @@ -2397,7 +2397,7 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp, tp->stats.rx_dropped++; tp->stats.rx_length_errors++; rtl8169_mark_to_asic(desc, tp->rx_buf_sz); - goto move_on; + continue; } rtl8169_rx_csum(skb, desc); @@ -2426,9 +2426,6 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp, tp->stats.rx_bytes += pkt_size; tp->stats.rx_packets++; } -move_on: - cur_rx++; - rx_left--; } count = cur_rx - tp->cur_rx; -- cgit v1.2.3 From b9a6eaffe7ff3d3481efa9fa353b2c6a02eda756 Mon Sep 17 00:00:00 2001 From: Daniel Ritz Date: Sun, 10 Apr 2005 20:27:45 +0200 Subject: [PATCH] 3c574_cs: disable interrupts in el3_close 3c574_cs forgets to disable interrupts during el3_close(). fix it by doing what 3c59x does. Signed-off-by: Daniel Ritz --- drivers/net/pcmcia/3c574_cs.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c index 41e51711480..c6e8b25f968 100644 --- a/drivers/net/pcmcia/3c574_cs.c +++ b/drivers/net/pcmcia/3c574_cs.c @@ -1274,6 +1274,9 @@ static int el3_close(struct net_device *dev) spin_lock_irqsave(&lp->window_lock, flags); update_stats(dev); spin_unlock_irqrestore(&lp->window_lock, flags); + + /* force interrupts off */ + outw(SetIntrEnb | 0x0000, ioaddr + EL3_CMD); } link->open--; -- cgit v1.2.3 From 8de901150f3c58b019b2a3ce497d23ab662dbb8b Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Tue, 12 Apr 2005 16:21:11 -0400 Subject: [PATCH] smc91x: improve diagnostic info ... and remove duplicate status defines. Signed-off-by: Nicolas Pitre Index: linux-2.6/drivers/net/smc91x.c =================================================================== --- drivers/net/smc91x.c | 30 +++++++++++++++++++----------- drivers/net/smc91x.h | 9 +-------- 2 files changed, 20 insertions(+), 19 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index 1e2b860dab2..a6c0628fdb2 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -792,17 +792,20 @@ static void smc_tx(struct net_device *dev) DBG(2, "%s: TX STATUS 0x%04x PNR 0x%02x\n", dev->name, tx_status, packet_no); - if (!(tx_status & TS_SUCCESS)) + if (!(tx_status & ES_TX_SUC)) lp->stats.tx_errors++; - if (tx_status & TS_LOSTCAR) + + if (tx_status & ES_LOSTCARR) lp->stats.tx_carrier_errors++; - if (tx_status & TS_LATCOL) { - PRINTK("%s: late collision occurred on last xmit\n", dev->name); + if (tx_status & (ES_LATCOL | ES_16COL)) { + PRINTK("%s: %s occurred on last xmit\n", dev->name, + (tx_status & ES_LATCOL) ? + "late collision" : "too many collisions"); lp->stats.tx_window_errors++; if (!(lp->stats.tx_window_errors & 63) && net_ratelimit()) { - printk(KERN_INFO "%s: unexpectedly large numbers of " - "late collisions. Please check duplex " + printk(KERN_INFO "%s: unexpectedly large number of " + "bad collisions. Please check duplex " "setting.\n", dev->name); } } @@ -1236,7 +1239,7 @@ static void smc_10bt_check_media(struct net_device *dev, int init) old_carrier = netif_carrier_ok(dev) ? 1 : 0; SMC_SELECT_BANK(0); - new_carrier = SMC_inw(ioaddr, EPH_STATUS_REG) & ES_LINK_OK ? 1 : 0; + new_carrier = (SMC_GET_EPH_STATUS() & ES_LINK_OK) ? 1 : 0; SMC_SELECT_BANK(2); if (init || (old_carrier != new_carrier)) { @@ -1337,7 +1340,10 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id, struct pt_regs *regs) /* multiple collisions */ lp->stats.collisions += card_stats & 0xF; } else if (status & IM_RX_OVRN_INT) { - DBG(1, "%s: RX overrun\n", dev->name); + DBG(1, "%s: RX overrun (EPH_ST 0x%04x)\n", dev->name, + ({ int eph_st; SMC_SELECT_BANK(0); + eph_st = SMC_GET_EPH_STATUS(); + SMC_SELECT_BANK(2); eph_st; }) ); SMC_ACK_INT(IM_RX_OVRN_INT); lp->stats.rx_errors++; lp->stats.rx_fifo_errors++; @@ -1389,7 +1395,7 @@ static void smc_timeout(struct net_device *dev) { struct smc_local *lp = netdev_priv(dev); void __iomem *ioaddr = lp->base; - int status, mask, meminfo, fifo; + int status, mask, eph_st, meminfo, fifo; DBG(2, "%s: %s\n", dev->name, __FUNCTION__); @@ -1398,11 +1404,13 @@ static void smc_timeout(struct net_device *dev) mask = SMC_GET_INT_MASK(); fifo = SMC_GET_FIFO(); SMC_SELECT_BANK(0); + eph_st = SMC_GET_EPH_STATUS(); meminfo = SMC_GET_MIR(); SMC_SELECT_BANK(2); spin_unlock_irq(&lp->lock); - PRINTK( "%s: INT 0x%02x MASK 0x%02x MEM 0x%04x FIFO 0x%04x\n", - dev->name, status, mask, meminfo, fifo ); + PRINTK( "%s: TX timeout (INT 0x%02x INTMASK 0x%02x " + "MEM 0x%04x FIFO 0x%04x EPH_ST 0x%04x)\n", + dev->name, status, mask, meminfo, fifo, eph_st ); smc_reset(dev); smc_enable(dev); diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index c3bf0cf7cf9..946528e6b74 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -680,14 +680,6 @@ static const char * chip_ids[ 16 ] = { NULL, NULL, NULL}; -/* - . Transmit status bits -*/ -#define TS_SUCCESS 0x0001 -#define TS_LOSTCAR 0x0400 -#define TS_LATCOL 0x0200 -#define TS_16COL 0x0010 - /* . Receive status bits */ @@ -845,6 +837,7 @@ static const char * chip_ids[ 16 ] = { #define SMC_GET_FIFO() SMC_inw( ioaddr, FIFO_REG ) #define SMC_GET_PTR() SMC_inw( ioaddr, PTR_REG ) #define SMC_SET_PTR(x) SMC_outw( x, ioaddr, PTR_REG ) +#define SMC_GET_EPH_STATUS() SMC_inw( ioaddr, EPH_STATUS_REG ) #define SMC_GET_RCR() SMC_inw( ioaddr, RCR_REG ) #define SMC_SET_RCR(x) SMC_outw( x, ioaddr, RCR_REG ) #define SMC_GET_REV() SMC_inw( ioaddr, REV_REG ) -- cgit v1.2.3 From ea9375607f8b312cf4389d68909330ed32a622ef Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Tue, 12 Apr 2005 16:26:40 -0400 Subject: [PATCH] smc91x: more tweaks to help with RX overruns Signed-off-by: Nicolas Pitre Index: linux-2.6/drivers/net/smc91x.c =================================================================== --- drivers/net/smc91x.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index a6c0628fdb2..fd80048f7f7 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -129,7 +129,7 @@ MODULE_PARM_DESC(nowait, "set to 1 for no wait state"); /* * Transmit timeout, default 5 seconds. */ -static int watchdog = 5000; +static int watchdog = 1000; module_param(watchdog, int, 0400); MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds"); @@ -660,15 +660,14 @@ static void smc_hardware_send_pkt(unsigned long data) SMC_outw(((len & 1) ? (0x2000 | buf[len-1]) : 0), ioaddr, DATA_REG); /* - * If THROTTLE_TX_PKTS is set, we look at the TX_EMPTY flag - * before queueing this packet for TX, and if it's clear then - * we stop the queue here. This will have the effect of - * having at most 2 packets queued for TX in the chip's memory - * at all time. If THROTTLE_TX_PKTS is not set then the queue - * is stopped only when memory allocation (MC_ALLOC) does not - * succeed right away. + * If THROTTLE_TX_PKTS is set, we stop the queue here. This will + * have the effect of having at most one packet queued for TX + * in the chip's memory at all time. + * + * If THROTTLE_TX_PKTS is not set then the queue is stopped only + * when memory allocation (MC_ALLOC) does not succeed right away. */ - if (THROTTLE_TX_PKTS && !(SMC_GET_INT() & IM_TX_EMPTY_INT)) + if (THROTTLE_TX_PKTS) netif_stop_queue(dev); /* queue the packet for TX */ @@ -1311,15 +1310,16 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id, struct pt_regs *regs) if (!status) break; - if (status & IM_RCV_INT) { - DBG(3, "%s: RX irq\n", dev->name); - smc_rcv(dev); - } else if (status & IM_TX_INT) { + if (status & IM_TX_INT) { + /* do this before RX as it will free memory quickly */ DBG(3, "%s: TX int\n", dev->name); smc_tx(dev); SMC_ACK_INT(IM_TX_INT); if (THROTTLE_TX_PKTS) netif_wake_queue(dev); + } else if (status & IM_RCV_INT) { + DBG(3, "%s: RX irq\n", dev->name); + smc_rcv(dev); } else if (status & IM_ALLOC_INT) { DBG(3, "%s: Allocation irq\n", dev->name); tasklet_hi_schedule(&lp->tx_task); -- cgit v1.2.3 From 4cafd3f533475c976879d85773735c004f09f576 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Sun, 29 May 2005 14:56:34 -0700 Subject: [TG3]: Add basic selftest infrastructure Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index f10dd74988c..088ed9f634e 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -133,6 +133,8 @@ /* number of ETHTOOL_GSTATS u64's */ #define TG3_NUM_STATS (sizeof(struct tg3_ethtool_stats)/sizeof(u64)) +#define TG3_NUM_TEST 6 + static char version[] __devinitdata = DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; @@ -316,6 +318,17 @@ static struct { { "nic_tx_threshold_hit" } }; +static struct { + const char string[ETH_GSTRING_LEN]; +} ethtool_test_keys[TG3_NUM_TEST] = { + { "nvram test (online) " }, + { "link test (online) " }, + { "register test (offline)" }, + { "memory test (offline)" }, + { "loopback test (offline)" }, + { "interrupt test (offline)" }, +}; + static void tg3_write_indirect_reg32(struct tg3 *tp, u32 off, u32 val) { if ((tp->tg3_flags & TG3_FLAG_PCIX_TARGET_HWBUG) != 0) { @@ -7199,12 +7212,20 @@ static int tg3_get_stats_count (struct net_device *dev) return TG3_NUM_STATS; } +static int tg3_get_test_count (struct net_device *dev) +{ + return TG3_NUM_TEST; +} + static void tg3_get_strings (struct net_device *dev, u32 stringset, u8 *buf) { switch (stringset) { case ETH_SS_STATS: memcpy(buf, ðtool_stats_keys, sizeof(ethtool_stats_keys)); break; + case ETH_SS_TEST: + memcpy(buf, ðtool_test_keys, sizeof(ethtool_test_keys)); + break; default: WARN_ON(1); /* we need a WARN() */ break; @@ -7218,6 +7239,11 @@ static void tg3_get_ethtool_stats (struct net_device *dev, memcpy(tmp_stats, tg3_get_estats(tp), sizeof(tp->estats)); } +static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest, + u64 *data) +{ +} + static int tg3_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) { struct mii_ioctl_data *data = if_mii(ifr); @@ -7331,6 +7357,8 @@ static struct ethtool_ops tg3_ethtool_ops = { .get_tso = ethtool_op_get_tso, .set_tso = tg3_set_tso, #endif + .self_test_count = tg3_get_test_count, + .self_test = tg3_self_test, .get_strings = tg3_get_strings, .get_stats_count = tg3_get_stats_count, .get_ethtool_stats = tg3_get_ethtool_stats, -- cgit v1.2.3 From 566f86adb336637d03900f53b886d879aa5f5d56 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Sun, 29 May 2005 14:56:58 -0700 Subject: [TG3]: Add nvram test Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 50 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 088ed9f634e..ab2fa213b30 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -7239,9 +7239,59 @@ static void tg3_get_ethtool_stats (struct net_device *dev, memcpy(tmp_stats, tg3_get_estats(tp), sizeof(tp->estats)); } +#define NVRAM_TEST_SIZE 0x100 + +static int tg3_test_nvram(struct tg3 *tp) +{ + u32 *buf, csum; + int i, j, err = 0; + + buf = kmalloc(NVRAM_TEST_SIZE, GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + + for (i = 0, j = 0; i < NVRAM_TEST_SIZE; i += 4, j++) { + u32 val; + + if ((err = tg3_nvram_read(tp, i, &val)) != 0) + break; + buf[j] = cpu_to_le32(val); + } + if (i < NVRAM_TEST_SIZE) + goto out; + + err = -EIO; + if (cpu_to_be32(buf[0]) != TG3_EEPROM_MAGIC) + goto out; + + /* Bootstrap checksum at offset 0x10 */ + csum = calc_crc((unsigned char *) buf, 0x10); + if(csum != cpu_to_le32(buf[0x10/4])) + goto out; + + /* Manufacturing block starts at offset 0x74, checksum at 0xfc */ + csum = calc_crc((unsigned char *) &buf[0x74/4], 0x88); + if (csum != cpu_to_le32(buf[0xfc/4])) + goto out; + + err = 0; + +out: + kfree(buf); + return err; +} + static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest, u64 *data) { + struct tg3 *tp = netdev_priv(dev); + + memset(data, 0, sizeof(u64) * TG3_NUM_TEST); + + if (tg3_test_nvram(tp) != 0) { + etest->flags |= ETH_TEST_FL_FAILED; + data[0] = 1; + } } static int tg3_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -- cgit v1.2.3 From ca43007a92662621e5819912fc31c346e3a2eed8 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Sun, 29 May 2005 14:57:23 -0700 Subject: [TG3]: Add link test Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index ab2fa213b30..30349c5fd73 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -7281,6 +7281,32 @@ out: return err; } +#define TG3_SERDES_TIMEOUT_SEC 2 +#define TG3_COPPER_TIMEOUT_SEC 6 + +static int tg3_test_link(struct tg3 *tp) +{ + int i, max; + + if (!netif_running(tp->dev)) + return -ENODEV; + + if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) + max = TG3_SERDES_TIMEOUT_SEC; + else + max = TG3_COPPER_TIMEOUT_SEC; + + for (i = 0; i < max; i++) { + if (netif_carrier_ok(tp->dev)) + return 0; + + if (msleep_interruptible(1000)) + break; + } + + return -EIO; +} + static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest, u64 *data) { @@ -7292,6 +7318,10 @@ static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest, etest->flags |= ETH_TEST_FL_FAILED; data[0] = 1; } + if (tg3_test_link(tp) != 0) { + etest->flags |= ETH_TEST_FL_FAILED; + data[1] = 1; + } } static int tg3_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -- cgit v1.2.3 From 944d980ecaabe44616a9e2d50101ce774f517bb6 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Sun, 29 May 2005 14:57:48 -0700 Subject: [TG3]: Add parameter to tg3_halt Add a reset kind parameter to tg3_halt() so that the RESET_KIND_SUSPEND parameter can be passed to tg3_halt() before doing offline tests. All other calls to tg3_halt() will use the RESET_KIND_SHUTDOWN parameter. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 30349c5fd73..73f6e962ed5 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -3083,7 +3083,7 @@ static irqreturn_t tg3_test_isr(int irq, void *dev_id, } static int tg3_init_hw(struct tg3 *); -static int tg3_halt(struct tg3 *, int); +static int tg3_halt(struct tg3 *, int, int); #ifdef CONFIG_NET_POLL_CONTROLLER static void tg3_poll_controller(struct net_device *dev) @@ -3107,7 +3107,7 @@ static void tg3_reset_task(void *_data) restart_timer = tp->tg3_flags2 & TG3_FLG2_RESTART_TIMER; tp->tg3_flags2 &= ~TG3_FLG2_RESTART_TIMER; - tg3_halt(tp, 0); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 0); tg3_init_hw(tp); tg3_netif_start(tp); @@ -3453,7 +3453,7 @@ static int tg3_change_mtu(struct net_device *dev, int new_mtu) spin_lock_irq(&tp->lock); spin_lock(&tp->tx_lock); - tg3_halt(tp, 1); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); tg3_set_mtu(dev, tp, new_mtu); @@ -4144,19 +4144,19 @@ static void tg3_stop_fw(struct tg3 *tp) } /* tp->lock is held. */ -static int tg3_halt(struct tg3 *tp, int silent) +static int tg3_halt(struct tg3 *tp, int kind, int silent) { int err; tg3_stop_fw(tp); - tg3_write_sig_pre_reset(tp, RESET_KIND_SHUTDOWN); + tg3_write_sig_pre_reset(tp, kind); tg3_abort_hw(tp, silent); err = tg3_chip_reset(tp); - tg3_write_sig_legacy(tp, RESET_KIND_SHUTDOWN); - tg3_write_sig_post_reset(tp, RESET_KIND_SHUTDOWN); + tg3_write_sig_legacy(tp, kind); + tg3_write_sig_post_reset(tp, kind); if (err) return err; @@ -5997,7 +5997,7 @@ static int tg3_test_msi(struct tg3 *tp) spin_lock_irq(&tp->lock); spin_lock(&tp->tx_lock); - tg3_halt(tp, 1); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); err = tg3_init_hw(tp); spin_unlock(&tp->tx_lock); @@ -6073,7 +6073,7 @@ static int tg3_open(struct net_device *dev) err = tg3_init_hw(tp); if (err) { - tg3_halt(tp, 1); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); tg3_free_rings(tp); } else { if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) @@ -6117,7 +6117,7 @@ static int tg3_open(struct net_device *dev) pci_disable_msi(tp->pdev); tp->tg3_flags2 &= ~TG3_FLG2_USING_MSI; } - tg3_halt(tp, 1); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); tg3_free_rings(tp); tg3_free_consistent(tp); @@ -6390,7 +6390,7 @@ static int tg3_close(struct net_device *dev) tg3_disable_ints(tp); - tg3_halt(tp, 1); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); tg3_free_rings(tp); tp->tg3_flags &= ~(TG3_FLAG_INIT_COMPLETE | @@ -7110,7 +7110,7 @@ static int tg3_set_ringparam(struct net_device *dev, struct ethtool_ringparam *e tp->tx_pending = ering->tx_pending; if (netif_running(dev)) { - tg3_halt(tp, 1); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); tg3_init_hw(tp); tg3_netif_start(tp); } @@ -7153,7 +7153,7 @@ static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam tp->tg3_flags &= ~TG3_FLAG_TX_PAUSE; if (netif_running(dev)) { - tg3_halt(tp, 1); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); tg3_init_hw(tp); tg3_netif_start(tp); } @@ -9586,7 +9586,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, (tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) { pci_save_state(tp->pdev); tw32(MEMARB_MODE, MEMARB_MODE_ENABLE); - tg3_halt(tp, 1); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); } err = tg3_test_dma(tp); @@ -9713,7 +9713,7 @@ static int tg3_suspend(struct pci_dev *pdev, pm_message_t state) spin_lock_irq(&tp->lock); spin_lock(&tp->tx_lock); - tg3_halt(tp, 1); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); spin_unlock(&tp->tx_lock); spin_unlock_irq(&tp->lock); -- cgit v1.2.3 From a71116d1f3b85a69fe3a3acec9223fefb4b1fc66 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Sun, 29 May 2005 14:58:11 -0700 Subject: [TG3]: Add register test Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 241 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 241 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 73f6e962ed5..4589f8f9011 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -7307,6 +7307,219 @@ static int tg3_test_link(struct tg3 *tp) return -EIO; } +/* Only test the commonly used registers */ +static int tg3_test_registers(struct tg3 *tp) +{ + int i, is_5705; + u32 offset, read_mask, write_mask, val, save_val, read_val; + static struct { + u16 offset; + u16 flags; +#define TG3_FL_5705 0x1 +#define TG3_FL_NOT_5705 0x2 +#define TG3_FL_NOT_5788 0x4 + u32 read_mask; + u32 write_mask; + } reg_tbl[] = { + /* MAC Control Registers */ + { MAC_MODE, TG3_FL_NOT_5705, + 0x00000000, 0x00ef6f8c }, + { MAC_MODE, TG3_FL_5705, + 0x00000000, 0x01ef6b8c }, + { MAC_STATUS, TG3_FL_NOT_5705, + 0x03800107, 0x00000000 }, + { MAC_STATUS, TG3_FL_5705, + 0x03800100, 0x00000000 }, + { MAC_ADDR_0_HIGH, 0x0000, + 0x00000000, 0x0000ffff }, + { MAC_ADDR_0_LOW, 0x0000, + 0x00000000, 0xffffffff }, + { MAC_RX_MTU_SIZE, 0x0000, + 0x00000000, 0x0000ffff }, + { MAC_TX_MODE, 0x0000, + 0x00000000, 0x00000070 }, + { MAC_TX_LENGTHS, 0x0000, + 0x00000000, 0x00003fff }, + { MAC_RX_MODE, TG3_FL_NOT_5705, + 0x00000000, 0x000007fc }, + { MAC_RX_MODE, TG3_FL_5705, + 0x00000000, 0x000007dc }, + { MAC_HASH_REG_0, 0x0000, + 0x00000000, 0xffffffff }, + { MAC_HASH_REG_1, 0x0000, + 0x00000000, 0xffffffff }, + { MAC_HASH_REG_2, 0x0000, + 0x00000000, 0xffffffff }, + { MAC_HASH_REG_3, 0x0000, + 0x00000000, 0xffffffff }, + + /* Receive Data and Receive BD Initiator Control Registers. */ + { RCVDBDI_JUMBO_BD+0, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { RCVDBDI_JUMBO_BD+4, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { RCVDBDI_JUMBO_BD+8, TG3_FL_NOT_5705, + 0x00000000, 0x00000003 }, + { RCVDBDI_JUMBO_BD+0xc, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { RCVDBDI_STD_BD+0, 0x0000, + 0x00000000, 0xffffffff }, + { RCVDBDI_STD_BD+4, 0x0000, + 0x00000000, 0xffffffff }, + { RCVDBDI_STD_BD+8, 0x0000, + 0x00000000, 0xffff0002 }, + { RCVDBDI_STD_BD+0xc, 0x0000, + 0x00000000, 0xffffffff }, + + /* Receive BD Initiator Control Registers. */ + { RCVBDI_STD_THRESH, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { RCVBDI_STD_THRESH, TG3_FL_5705, + 0x00000000, 0x000003ff }, + { RCVBDI_JUMBO_THRESH, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + + /* Host Coalescing Control Registers. */ + { HOSTCC_MODE, TG3_FL_NOT_5705, + 0x00000000, 0x00000004 }, + { HOSTCC_MODE, TG3_FL_5705, + 0x00000000, 0x000000f6 }, + { HOSTCC_RXCOL_TICKS, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_RXCOL_TICKS, TG3_FL_5705, + 0x00000000, 0x000003ff }, + { HOSTCC_TXCOL_TICKS, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_TXCOL_TICKS, TG3_FL_5705, + 0x00000000, 0x000003ff }, + { HOSTCC_RXMAX_FRAMES, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_RXMAX_FRAMES, TG3_FL_5705 | TG3_FL_NOT_5788, + 0x00000000, 0x000000ff }, + { HOSTCC_TXMAX_FRAMES, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_TXMAX_FRAMES, TG3_FL_5705 | TG3_FL_NOT_5788, + 0x00000000, 0x000000ff }, + { HOSTCC_RXCOAL_TICK_INT, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_TXCOAL_TICK_INT, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_RXCOAL_MAXF_INT, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_RXCOAL_MAXF_INT, TG3_FL_5705 | TG3_FL_NOT_5788, + 0x00000000, 0x000000ff }, + { HOSTCC_TXCOAL_MAXF_INT, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_TXCOAL_MAXF_INT, TG3_FL_5705 | TG3_FL_NOT_5788, + 0x00000000, 0x000000ff }, + { HOSTCC_STAT_COAL_TICKS, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_STATS_BLK_HOST_ADDR, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_STATS_BLK_HOST_ADDR+4, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_STATUS_BLK_HOST_ADDR, 0x0000, + 0x00000000, 0xffffffff }, + { HOSTCC_STATUS_BLK_HOST_ADDR+4, 0x0000, + 0x00000000, 0xffffffff }, + { HOSTCC_STATS_BLK_NIC_ADDR, 0x0000, + 0xffffffff, 0x00000000 }, + { HOSTCC_STATUS_BLK_NIC_ADDR, 0x0000, + 0xffffffff, 0x00000000 }, + + /* Buffer Manager Control Registers. */ + { BUFMGR_MB_POOL_ADDR, 0x0000, + 0x00000000, 0x007fff80 }, + { BUFMGR_MB_POOL_SIZE, 0x0000, + 0x00000000, 0x007fffff }, + { BUFMGR_MB_RDMA_LOW_WATER, 0x0000, + 0x00000000, 0x0000003f }, + { BUFMGR_MB_MACRX_LOW_WATER, 0x0000, + 0x00000000, 0x000001ff }, + { BUFMGR_MB_HIGH_WATER, 0x0000, + 0x00000000, 0x000001ff }, + { BUFMGR_DMA_DESC_POOL_ADDR, TG3_FL_NOT_5705, + 0xffffffff, 0x00000000 }, + { BUFMGR_DMA_DESC_POOL_SIZE, TG3_FL_NOT_5705, + 0xffffffff, 0x00000000 }, + + /* Mailbox Registers */ + { GRCMBOX_RCVSTD_PROD_IDX+4, 0x0000, + 0x00000000, 0x000001ff }, + { GRCMBOX_RCVJUMBO_PROD_IDX+4, TG3_FL_NOT_5705, + 0x00000000, 0x000001ff }, + { GRCMBOX_RCVRET_CON_IDX_0+4, 0x0000, + 0x00000000, 0x000007ff }, + { GRCMBOX_SNDHOST_PROD_IDX_0+4, 0x0000, + 0x00000000, 0x000001ff }, + + { 0xffff, 0x0000, 0x00000000, 0x00000000 }, + }; + + if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) + is_5705 = 1; + else + is_5705 = 0; + + for (i = 0; reg_tbl[i].offset != 0xffff; i++) { + if (is_5705 && (reg_tbl[i].flags & TG3_FL_NOT_5705)) + continue; + + if (!is_5705 && (reg_tbl[i].flags & TG3_FL_5705)) + continue; + + if ((tp->tg3_flags2 & TG3_FLG2_IS_5788) && + (reg_tbl[i].flags & TG3_FL_NOT_5788)) + continue; + + offset = (u32) reg_tbl[i].offset; + read_mask = reg_tbl[i].read_mask; + write_mask = reg_tbl[i].write_mask; + + /* Save the original register content */ + save_val = tr32(offset); + + /* Determine the read-only value. */ + read_val = save_val & read_mask; + + /* Write zero to the register, then make sure the read-only bits + * are not changed and the read/write bits are all zeros. + */ + tw32(offset, 0); + + val = tr32(offset); + + /* Test the read-only and read/write bits. */ + if (((val & read_mask) != read_val) || (val & write_mask)) + goto out; + + /* Write ones to all the bits defined by RdMask and WrMask, then + * make sure the read-only bits are not changed and the + * read/write bits are all ones. + */ + tw32(offset, read_mask | write_mask); + + val = tr32(offset); + + /* Test the read-only bits. */ + if ((val & read_mask) != read_val) + goto out; + + /* Test the read/write bits. */ + if ((val & write_mask) != write_mask) + goto out; + + tw32(offset, save_val); + } + + return 0; + +out: + printk(KERN_ERR PFX "Register test failed at offset %x\n", offset); + tw32(offset, save_val); + return -EIO; +} + static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest, u64 *data) { @@ -7322,6 +7535,34 @@ static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest, etest->flags |= ETH_TEST_FL_FAILED; data[1] = 1; } + if (etest->flags & ETH_TEST_FL_OFFLINE) { + if (netif_running(dev)) + tg3_netif_stop(tp); + + spin_lock_irq(&tp->lock); + spin_lock(&tp->tx_lock); + + tg3_halt(tp, RESET_KIND_SUSPEND, 1); + tg3_nvram_lock(tp); + tg3_halt_cpu(tp, RX_CPU_BASE); + if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) + tg3_halt_cpu(tp, TX_CPU_BASE); + tg3_nvram_unlock(tp); + + if (tg3_test_registers(tp) != 0) { + etest->flags |= ETH_TEST_FL_FAILED; + data[2] = 1; + } + + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); + if (netif_running(dev)) { + tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE; + tg3_init_hw(tp); + tg3_netif_start(tp); + } + spin_unlock(&tp->tx_lock); + spin_unlock_irq(&tp->lock); + } } static int tg3_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -- cgit v1.2.3 From 7942e1dbd7252b480ed238096dca617189d293df Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Sun, 29 May 2005 14:58:36 -0700 Subject: [TG3]: Add memory test Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 60 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 4589f8f9011..49cb7b3e283 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -7520,6 +7520,62 @@ out: return -EIO; } +static int tg3_do_mem_test(struct tg3 *tp, u32 offset, u32 len) +{ + static u32 test_pattern[] = { 0x00000000, 0xffffffff, 0xaa55a55a }; + int i; + u32 j; + + for (i = 0; i < sizeof(test_pattern)/sizeof(u32); i++) { + for (j = 0; j < len; j += 4) { + u32 val; + + tg3_write_mem(tp, offset + j, test_pattern[i]); + tg3_read_mem(tp, offset + j, &val); + if (val != test_pattern[i]) + return -EIO; + } + } + return 0; +} + +static int tg3_test_memory(struct tg3 *tp) +{ + static struct mem_entry { + u32 offset; + u32 len; + } mem_tbl_570x[] = { + { 0x00000000, 0x01000}, + { 0x00002000, 0x1c000}, + { 0xffffffff, 0x00000} + }, mem_tbl_5705[] = { + { 0x00000100, 0x0000c}, + { 0x00000200, 0x00008}, + { 0x00000b50, 0x00400}, + { 0x00004000, 0x00800}, + { 0x00006000, 0x01000}, + { 0x00008000, 0x02000}, + { 0x00010000, 0x0e000}, + { 0xffffffff, 0x00000} + }; + struct mem_entry *mem_tbl; + int err = 0; + int i; + + if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) + mem_tbl = mem_tbl_5705; + else + mem_tbl = mem_tbl_570x; + + for (i = 0; mem_tbl[i].offset != 0xffffffff; i++) { + if ((err = tg3_do_mem_test(tp, mem_tbl[i].offset, + mem_tbl[i].len)) != 0) + break; + } + + return err; +} + static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest, u64 *data) { @@ -7553,6 +7609,10 @@ static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest, etest->flags |= ETH_TEST_FL_FAILED; data[2] = 1; } + if (tg3_test_memory(tp) != 0) { + etest->flags |= ETH_TEST_FL_FAILED; + data[3] = 1; + } tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); if (netif_running(dev)) { -- cgit v1.2.3 From c76949a6826fc11efcd6bb1abdca1ae02761071d Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Sun, 29 May 2005 14:58:59 -0700 Subject: [TG3]: Add loopback test The test will loopback one packet in MAC loopback mode and verify the packet data. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 115 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 115 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 49cb7b3e283..2a771fd4c7c 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -7576,6 +7576,117 @@ static int tg3_test_memory(struct tg3 *tp) return err; } +static int tg3_test_loopback(struct tg3 *tp) +{ + u32 mac_mode, send_idx, rx_start_idx, rx_idx, tx_idx, opaque_key; + u32 desc_idx; + struct sk_buff *skb, *rx_skb; + u8 *tx_data; + dma_addr_t map; + int num_pkts, tx_len, rx_len, i, err; + struct tg3_rx_buffer_desc *desc; + + if (!netif_running(tp->dev)) + return -ENODEV; + + err = -EIO; + + tg3_abort_hw(tp, 1); + + /* Clearing this flag to keep interrupts disabled */ + tp->tg3_flags &= ~TG3_FLAG_INIT_COMPLETE; + tg3_reset_hw(tp); + + mac_mode = (tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK) | + MAC_MODE_PORT_INT_LPBACK | MAC_MODE_LINK_POLARITY | + MAC_MODE_PORT_MODE_GMII; + tw32(MAC_MODE, mac_mode); + + tx_len = 1514; + skb = dev_alloc_skb(tx_len); + tx_data = skb_put(skb, tx_len); + memcpy(tx_data, tp->dev->dev_addr, 6); + memset(tx_data + 6, 0x0, 8); + + tw32(MAC_RX_MTU_SIZE, tx_len + 4); + + for (i = 14; i < tx_len; i++) + tx_data[i] = (u8) (i & 0xff); + + map = pci_map_single(tp->pdev, skb->data, tx_len, PCI_DMA_TODEVICE); + + tw32_f(HOSTCC_MODE, tp->coalesce_mode | HOSTCC_MODE_ENABLE | + HOSTCC_MODE_NOW); + + udelay(10); + + rx_start_idx = tp->hw_status->idx[0].rx_producer; + + send_idx = 0; + num_pkts = 0; + + tg3_set_txd(tp, send_idx, map, tx_len, 0, 1); + + send_idx++; + num_pkts++; + + tw32_tx_mbox(MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW, send_idx); + tr32(MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW); + + udelay(10); + + for (i = 0; i < 10; i++) { + tw32_f(HOSTCC_MODE, tp->coalesce_mode | HOSTCC_MODE_ENABLE | + HOSTCC_MODE_NOW); + + udelay(10); + + tx_idx = tp->hw_status->idx[0].tx_consumer; + rx_idx = tp->hw_status->idx[0].rx_producer; + if ((tx_idx == send_idx) && + (rx_idx == (rx_start_idx + num_pkts))) + break; + } + + pci_unmap_single(tp->pdev, map, tx_len, PCI_DMA_TODEVICE); + dev_kfree_skb(skb); + + if (tx_idx != send_idx) + goto out; + + if (rx_idx != rx_start_idx + num_pkts) + goto out; + + desc = &tp->rx_rcb[rx_start_idx]; + desc_idx = desc->opaque & RXD_OPAQUE_INDEX_MASK; + opaque_key = desc->opaque & RXD_OPAQUE_RING_MASK; + if (opaque_key != RXD_OPAQUE_RING_STD) + goto out; + + if ((desc->err_vlan & RXD_ERR_MASK) != 0 && + (desc->err_vlan != RXD_ERR_ODD_NIBBLE_RCVD_MII)) + goto out; + + rx_len = ((desc->idx_len & RXD_LEN_MASK) >> RXD_LEN_SHIFT) - 4; + if (rx_len != tx_len) + goto out; + + rx_skb = tp->rx_std_buffers[desc_idx].skb; + + map = pci_unmap_addr(&tp->rx_std_buffers[desc_idx], mapping); + pci_dma_sync_single_for_cpu(tp->pdev, map, rx_len, PCI_DMA_FROMDEVICE); + + for (i = 14; i < tx_len; i++) { + if (*(rx_skb->data + i) != (u8) (i & 0xff)) + goto out; + } + err = 0; + + /* tg3_free_rings will unmap and free the rx_skb */ +out: + return err; +} + static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest, u64 *data) { @@ -7613,6 +7724,10 @@ static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest, etest->flags |= ETH_TEST_FL_FAILED; data[3] = 1; } + if (tg3_test_loopback(tp) != 0) { + etest->flags |= ETH_TEST_FL_FAILED; + data[4] = 1; + } tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); if (netif_running(dev)) { -- cgit v1.2.3 From d4bc3927d284784b3f0bff05b4eed2242cc3e226 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Sun, 29 May 2005 14:59:20 -0700 Subject: [TG3]: Add interrupt test This test uses the previously added tg3_test_interrupt() to perform the test. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 2a771fd4c7c..82afd26a829 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -5894,6 +5894,9 @@ static int tg3_test_interrupt(struct tg3 *tp) int err, i; u32 int_mbox = 0; + if (!netif_running(dev)) + return -ENODEV; + tg3_disable_ints(tp); free_irq(tp->pdev->irq, dev); @@ -7729,6 +7732,15 @@ static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest, data[4] = 1; } + spin_unlock(&tp->tx_lock); + spin_unlock_irq(&tp->lock); + if (tg3_test_interrupt(tp) != 0) { + etest->flags |= ETH_TEST_FL_FAILED; + data[5] = 1; + } + spin_lock_irq(&tp->lock); + spin_lock(&tp->tx_lock); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); if (netif_running(dev)) { tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE; -- cgit v1.2.3 From 1b62815193f6c20c60958e5347751155833e3d35 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Sun, 29 May 2005 14:59:49 -0700 Subject: [TG3]: Fix bug in tg3_load_firmware_cpu Add tg3_nvram_lock() and tg3_nvram_unlock() calls around tg3_halt_cpu(). It is possible that the bootcode may be loading code from nvram during this call and stopping the cpu without getting the lock may cause uncompleted nvram data to be left in the nvram data register. Subsequent calls to read/write nvram data will fail. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 82afd26a829..fc9b5cd957a 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -4370,7 +4370,12 @@ static int tg3_load_firmware_cpu(struct tg3 *tp, u32 cpu_base, u32 cpu_scratch_b */ tp->tg3_flags |= TG3_FLAG_PCIX_TARGET_HWBUG; + /* It is possible that bootcode is still loading at this point. + * Get the nvram lock first before halting the cpu. + */ + tg3_nvram_lock(tp); err = tg3_halt_cpu(tp, cpu_base); + tg3_nvram_unlock(tp); if (err) goto out; -- cgit v1.2.3 From 0fd56f67890acf7904c83e7de6cb71723eb1c962 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 2 Jun 2005 14:04:00 -0700 Subject: [PATCH] drivers/net/hamradio/baycom_epp.c: cleanups The times when tricky goto's produced better codes are long gone. This patch should express the same in a better way. (Also fixes the final gcc-4.0 x86 compile error) Signed-off-by: Adrian Bunk Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/net/hamradio/baycom_epp.c | 126 +++++++++++--------------------------- 1 file changed, 36 insertions(+), 90 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c index 1c563f905a5..a7f15d9f13e 100644 --- a/drivers/net/hamradio/baycom_epp.c +++ b/drivers/net/hamradio/baycom_epp.c @@ -374,29 +374,6 @@ static inline void do_kiss_params(struct baycom_state *bc, } /* --------------------------------------------------------------------- */ -/* - * high performance HDLC encoder - * yes, it's ugly, but generates pretty good code - */ - -#define ENCODEITERA(j) \ -({ \ - if (!(notbitstream & (0x1f0 << j))) \ - goto stuff##j; \ - encodeend##j: ; \ -}) - -#define ENCODEITERB(j) \ -({ \ - stuff##j: \ - bitstream &= ~(0x100 << j); \ - bitbuf = (bitbuf & (((2 << j) << numbit) - 1)) | \ - ((bitbuf & ~(((2 << j) << numbit) - 1)) << 1); \ - numbit++; \ - notbitstream = ~bitstream; \ - goto encodeend##j; \ -}) - static void encode_hdlc(struct baycom_state *bc) { @@ -405,6 +382,7 @@ static void encode_hdlc(struct baycom_state *bc) int pkt_len; unsigned bitstream, notbitstream, bitbuf, numbit, crc; unsigned char crcarr[2]; + int j; if (bc->hdlctx.bufcnt > 0) return; @@ -429,24 +407,14 @@ static void encode_hdlc(struct baycom_state *bc) pkt_len--; if (!pkt_len) bp = crcarr; - ENCODEITERA(0); - ENCODEITERA(1); - ENCODEITERA(2); - ENCODEITERA(3); - ENCODEITERA(4); - ENCODEITERA(5); - ENCODEITERA(6); - ENCODEITERA(7); - goto enditer; - ENCODEITERB(0); - ENCODEITERB(1); - ENCODEITERB(2); - ENCODEITERB(3); - ENCODEITERB(4); - ENCODEITERB(5); - ENCODEITERB(6); - ENCODEITERB(7); - enditer: + for (j = 0; j < 8; j++) + if (unlikely(!(notbitstream & (0x1f0 << j)))) { + bitstream &= ~(0x100 << j); + bitbuf = (bitbuf & (((2 << j) << numbit) - 1)) | + ((bitbuf & ~(((2 << j) << numbit) - 1)) << 1); + numbit++; + notbitstream = ~bitstream; + } numbit += 8; while (numbit >= 8) { *wp++ = bitbuf; @@ -610,37 +578,6 @@ static void do_rxpacket(struct net_device *dev) bc->stats.rx_packets++; } -#define DECODEITERA(j) \ -({ \ - if (!(notbitstream & (0x0fc << j))) /* flag or abort */ \ - goto flgabrt##j; \ - if ((bitstream & (0x1f8 << j)) == (0xf8 << j)) /* stuffed bit */ \ - goto stuff##j; \ - enditer##j: ; \ -}) - -#define DECODEITERB(j) \ -({ \ - flgabrt##j: \ - if (!(notbitstream & (0x1fc << j))) { /* abort received */ \ - state = 0; \ - goto enditer##j; \ - } \ - if ((bitstream & (0x1fe << j)) != (0x0fc << j)) /* flag received */ \ - goto enditer##j; \ - if (state) \ - do_rxpacket(dev); \ - bc->hdlcrx.bufcnt = 0; \ - bc->hdlcrx.bufptr = bc->hdlcrx.buf; \ - state = 1; \ - numbits = 7-j; \ - goto enditer##j; \ - stuff##j: \ - numbits--; \ - bitbuf = (bitbuf & ((~0xff) << j)) | ((bitbuf & ~((~0xff) << j)) << 1); \ - goto enditer##j; \ -}) - static int receive(struct net_device *dev, int cnt) { struct baycom_state *bc = netdev_priv(dev); @@ -649,6 +586,7 @@ static int receive(struct net_device *dev, int cnt) unsigned char tmp[128]; unsigned char *cp; int cnt2, ret = 0; + int j; numbits = bc->hdlcrx.numbits; state = bc->hdlcrx.state; @@ -669,24 +607,32 @@ static int receive(struct net_device *dev, int cnt) bitbuf |= (*cp) << 8; numbits += 8; notbitstream = ~bitstream; - DECODEITERA(0); - DECODEITERA(1); - DECODEITERA(2); - DECODEITERA(3); - DECODEITERA(4); - DECODEITERA(5); - DECODEITERA(6); - DECODEITERA(7); - goto enddec; - DECODEITERB(0); - DECODEITERB(1); - DECODEITERB(2); - DECODEITERB(3); - DECODEITERB(4); - DECODEITERB(5); - DECODEITERB(6); - DECODEITERB(7); - enddec: + for (j = 0; j < 8; j++) { + + /* flag or abort */ + if (unlikely(!(notbitstream & (0x0fc << j)))) { + + /* abort received */ + if (!(notbitstream & (0x1fc << j))) + state = 0; + + /* not flag received */ + else if (!(bitstream & (0x1fe << j)) != (0x0fc << j)) { + if (state) + do_rxpacket(dev); + bc->hdlcrx.bufcnt = 0; + bc->hdlcrx.bufptr = bc->hdlcrx.buf; + state = 1; + numbits = 7-j; + } + } + + /* stuffed bit */ + else if (unlikely((bitstream & (0x1f8 << j)) == (0xf8 << j))) { + numbits--; + bitbuf = (bitbuf & ((~0xff) << j)) | ((bitbuf & ~((~0xff) << j)) << 1); + } + } while (state && numbits >= 8) { if (bc->hdlcrx.bufcnt >= TXBUFFER_SIZE) { state = 0; -- cgit v1.2.3 From b597ef4712c05c962640a655386a7f06cc1a1fbc Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 2 Jun 2005 16:36:00 -0700 Subject: [NET]: Fix locking in shaper driver. o use a semaphore instead of an opencoded and racy lock o move locking out of shaper_kick and into the callers - most just released the lock before calling shaper_kick o remove in_interrupt() tests. from ->close we can always block, from ->hard_start_xmit and timer context never Signed-off-by: Christoph Hellwig Signed-off-by: David S. Miller --- drivers/net/shaper.c | 86 ++++++++++++---------------------------------------- 1 file changed, 19 insertions(+), 67 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/shaper.c b/drivers/net/shaper.c index e68cf5fb492..20edeb34579 100644 --- a/drivers/net/shaper.c +++ b/drivers/net/shaper.c @@ -100,35 +100,8 @@ static int sh_debug; /* Debug flag */ #define SHAPER_BANNER "CymruNet Traffic Shaper BETA 0.04 for Linux 2.1\n" -/* - * Locking - */ - -static int shaper_lock(struct shaper *sh) -{ - /* - * Lock in an interrupt must fail - */ - while (test_and_set_bit(0, &sh->locked)) - { - if (!in_interrupt()) - sleep_on(&sh->wait_queue); - else - return 0; - - } - return 1; -} - static void shaper_kick(struct shaper *sh); -static void shaper_unlock(struct shaper *sh) -{ - clear_bit(0, &sh->locked); - wake_up(&sh->wait_queue); - shaper_kick(sh); -} - /* * Compute clocks on a buffer */ @@ -157,17 +130,15 @@ static void shaper_setspeed(struct shaper *shaper, int bitspersec) * Throw a frame at a shaper. */ -static int shaper_qframe(struct shaper *shaper, struct sk_buff *skb) + +static int shaper_start_xmit(struct sk_buff *skb, struct net_device *dev) { + struct shaper *shaper = dev->priv; struct sk_buff *ptr; - /* - * Get ready to work on this shaper. Lock may fail if its - * an interrupt and locked. - */ - - if(!shaper_lock(shaper)) - return -1; + if (down_trylock(&shaper->sem)) + return -1; + ptr=shaper->sendq.prev; /* @@ -260,7 +231,8 @@ static int shaper_qframe(struct shaper *shaper, struct sk_buff *skb) dev_kfree_skb(ptr); shaper->stats.collisions++; } - shaper_unlock(shaper); + shaper_kick(shaper); + up(&shaper->sem); return 0; } @@ -297,8 +269,13 @@ static void shaper_queue_xmit(struct shaper *shaper, struct sk_buff *skb) static void shaper_timer(unsigned long data) { - struct shaper *sh=(struct shaper *)data; - shaper_kick(sh); + struct shaper *shaper = (struct shaper *)data; + + if (!down_trylock(&shaper->sem)) { + shaper_kick(shaper); + up(&shaper->sem); + } else + mod_timer(&shaper->timer, jiffies); } /* @@ -310,19 +287,6 @@ static void shaper_kick(struct shaper *shaper) { struct sk_buff *skb; - /* - * Shaper unlock will kick - */ - - if (test_and_set_bit(0, &shaper->locked)) - { - if(sh_debug) - printk("Shaper locked.\n"); - mod_timer(&shaper->timer, jiffies); - return; - } - - /* * Walk the list (may be empty) */ @@ -364,8 +328,6 @@ static void shaper_kick(struct shaper *shaper) if(skb!=NULL) mod_timer(&shaper->timer, SHAPERCB(skb)->shapeclock); - - clear_bit(0, &shaper->locked); } @@ -376,14 +338,12 @@ static void shaper_kick(struct shaper *shaper) static void shaper_flush(struct shaper *shaper) { struct sk_buff *skb; - if(!shaper_lock(shaper)) - { - printk(KERN_ERR "shaper: shaper_flush() called by an irq!\n"); - return; - } + + down(&shaper->sem); while((skb=skb_dequeue(&shaper->sendq))!=NULL) dev_kfree_skb(skb); - shaper_unlock(shaper); + shaper_kick(shaper); + up(&shaper->sem); } /* @@ -426,13 +386,6 @@ static int shaper_close(struct net_device *dev) * ARP and other resolutions and not before. */ - -static int shaper_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct shaper *sh=dev->priv; - return shaper_qframe(sh, skb); -} - static struct net_device_stats *shaper_get_stats(struct net_device *dev) { struct shaper *sh=dev->priv; @@ -623,7 +576,6 @@ static void shaper_init_priv(struct net_device *dev) init_timer(&sh->timer); sh->timer.function=shaper_timer; sh->timer.data=(unsigned long)sh; - init_waitqueue_head(&sh->wait_queue); } /* -- cgit v1.2.3 From 49cabf49abd7676d026a61baabf5aae9337a82be Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 6 Jun 2005 15:15:17 -0700 Subject: [TG3]: Add TSO firmware license Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index fc9b5cd957a..d2050133930 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -7,7 +7,12 @@ * Copyright (C) 2005 Broadcom Corporation. * * Firmware is: - * Copyright (C) 2000-2003 Broadcom Corporation. + * Derived from proprietary unpublished source code, + * Copyright (C) 2000-2003 Broadcom Corporation. + * + * Permission is hereby granted for the distribution of this firmware + * data in hexadecimal or equivalent format, provided this copyright + * notice is accompanying it. */ #include -- cgit v1.2.3 From 9ba27794197a18168b99ccecfb7b799f18b64426 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 6 Jun 2005 15:16:20 -0700 Subject: [TG3] Fix link failure in 5701 On some 5701 devices with older bootcode, the LED configuration bits in SRAM may be invalid with value zero. The fix is to check for invalid bits (0) and default to PHY 1 mode. Incorrect LED mode will lead to error in programming the PHY. Thanks to Grant Grundler for debugging the problem. >From Grant: | In May, 2004, tg3 v3.4 changed how MAC_LED_CTRL (0x40c) was getting | programmed and how to determine what to program into LED_CTRL. The new | code trusted NIC_SRAM_DATA_CFG (0x00000b58) to indicate what to write | to LED_CTRL and MII EXT_CTRL registers. On "IOX Core Lan", SRAM was | saying MODE_MAC (0x0) and that doesn't work. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index d2050133930..6315564d2dc 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -8560,6 +8560,16 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp) case NIC_SRAM_DATA_CFG_LED_MODE_MAC: tp->led_ctrl = LED_CTRL_MODE_MAC; + + /* Default to PHY_1_MODE if 0 (MAC_MODE) is + * read on some older 5700/5701 bootcode. + */ + if (GET_ASIC_REV(tp->pci_chip_rev_id) == + ASIC_REV_5700 || + GET_ASIC_REV(tp->pci_chip_rev_id) == + ASIC_REV_5701) + tp->led_ctrl = LED_CTRL_MODE_PHY_1; + break; case SHASTA_EXT_LED_SHARED: -- cgit v1.2.3 From 15def7bfb6902aa2b2bc67059f26d696fb27c235 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 6 Jun 2005 15:22:56 -0700 Subject: [TG3]: Update driver version and release date. Signed-off-by: David S. Miller --- drivers/net/tg3.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 6315564d2dc..e944aac258e 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -66,8 +66,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.29" -#define DRV_MODULE_RELDATE "May 23, 2005" +#define DRV_MODULE_VERSION "3.30" +#define DRV_MODULE_RELDATE "June 6, 2005" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 -- cgit v1.2.3 From 6d1cfbab4de64f2d0c5b0f81177ade0d75b69288 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Wed, 8 Jun 2005 14:13:14 -0700 Subject: [TG3]: Fix 5700/5701 DMA corruption on Apple G4. Fix 5700/5701 DMA write corruption on Apple G4 by detecting the Apple UniNorth PCI 1.5 chipset and adjusting the DMA write boundary to 16. DMA test fails to detect the problem with this chipset. Thanks to Manuel Perez Ayala for reporting the problem and helping to debug it. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index e944aac258e..77337c3b428 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -9695,10 +9695,24 @@ static int __devinit tg3_test_dma(struct tg3 *tp) } if ((tp->dma_rwctrl & DMA_RWCTRL_WRITE_BNDRY_MASK) != DMA_RWCTRL_WRITE_BNDRY_16) { + static struct pci_device_id dma_wait_state_chipsets[] = { + { PCI_DEVICE(PCI_VENDOR_ID_APPLE, + PCI_DEVICE_ID_APPLE_UNI_N_PCI15) }, + { }, + }; + /* DMA test passed without adjusting DMA boundary, - * just restore the calculated DMA boundary + * now look for chipsets that are known to expose the + * DMA bug without failing the test. */ - tp->dma_rwctrl = saved_dma_rwctrl; + if (pci_dev_present(dma_wait_state_chipsets)) { + tp->dma_rwctrl &= ~DMA_RWCTRL_WRITE_BNDRY_MASK; + tp->dma_rwctrl |= DMA_RWCTRL_WRITE_BNDRY_16; + } + else + /* Safe to use the calculated DMA boundary. */ + tp->dma_rwctrl = saved_dma_rwctrl; + tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl); } -- cgit v1.2.3 From ed7fce6c13bdd802817e1988d67047d432e7e30b Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 8 Jun 2005 14:15:52 -0700 Subject: [TG3]: Update driver version and release date. Signed-off-by: David S. Miller --- drivers/net/tg3.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 77337c3b428..a0b8848049c 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -66,8 +66,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.30" -#define DRV_MODULE_RELDATE "June 6, 2005" +#define DRV_MODULE_VERSION "3.31" +#define DRV_MODULE_RELDATE "June 8, 2005" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 -- cgit v1.2.3 From 243cd55e021baf28babdd88112ac03ae5cd4bb9c Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 9 Jun 2005 12:36:33 -0700 Subject: [PATCH] iseries_veth: Supress spurious WARN_ON() at module unload My patch from a few weeks back (now in mainline), called "Cleanup skbs to prevent unregister_netdevice() hanging", can cause our TX timeout code to fire on machines with lots of VLANs (because it takes > 2 seconds between when we stop the queues and when we're finished stopping the connections). When that happens the TX timeout code freaks out and does a WARN_ON() because as far as it's concerned there shouldn't be a TX timeout happening, which is fair enough. I have a "proper" fix for this, which is to a) do refcounting on connections and b) implement a proper ack timer so we don't keep unacked skbs lying around for ever. But for 2.6.12 I propose just supressing the WARN_ON(). Users will still see the "NETDEV WATCHDOG" warning, but that's not nearly as bad as a WARN_ON() which users interpret as an Oops. Signed-off-by: Michael Ellerman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/net/iseries_veth.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c index 13ed8dc1e91..55af32e9bf0 100644 --- a/drivers/net/iseries_veth.c +++ b/drivers/net/iseries_veth.c @@ -802,13 +802,14 @@ static void veth_tx_timeout(struct net_device *dev) spin_lock_irqsave(&port->pending_gate, flags); + if (!port->pending_lpmask) { + spin_unlock_irqrestore(&port->pending_gate, flags); + return; + } + printk(KERN_WARNING "%s: Tx timeout! Resetting lp connections: %08x\n", dev->name, port->pending_lpmask); - /* If we've timed out the queue must be stopped, which should - * only ever happen when there is a pending packet. */ - WARN_ON(! port->pending_lpmask); - for (i = 0; i < HVMAXARCHITECTEDLPS; i++) { struct veth_lpar_connection *cnx = veth_cnx[i]; -- cgit v1.2.3 From 392a8b7efe069564bf7ed057103b1a3f41e55734 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 12 Jun 2005 10:57:40 +0200 Subject: [PATCH] IrDA: IrDA: Fix CONFIG_VIA_FIR typo (double `those') Signed-off-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds --- drivers/net/irda/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig index 1c553d7efdd..ca5914091d3 100644 --- a/drivers/net/irda/Kconfig +++ b/drivers/net/irda/Kconfig @@ -389,7 +389,7 @@ config VIA_FIR help Say Y here if you want to build support for the VIA VT8231 and VIA VT1211 IrDA controllers, found on the motherboards using - those those VIA chipsets. To use this controller, you will need + those VIA chipsets. To use this controller, you will need to plug a specific 5 pins FIR IrDA dongle in the specific motherboard connector. The driver provides support for SIR, MIR and FIR (4Mbps) speeds. -- cgit v1.2.3 From 979b6c135fc4d466a39d8e3ec05583e5ee30261a Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 13 Jun 2005 14:30:40 -0700 Subject: [NET]: Move the netdev list to vger.kernel.org. From: Ralf Baechle There are archives of the old list at http://oss.sgi.com/archives/netdev Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/net/r8169.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index b3768d84474..d6d0e43dab6 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -415,7 +415,7 @@ struct rtl8169_private { struct work_struct task; }; -MODULE_AUTHOR("Realtek and the Linux r8169 crew "); +MODULE_AUTHOR("Realtek and the Linux r8169 crew "); MODULE_DESCRIPTION("RealTek RTL-8169 Gigabit Ethernet driver"); module_param_array(media, int, &num_media, 0); module_param(rx_copybreak, int, 0); -- cgit v1.2.3 From 56b2293595b2eb52cc2aa2baf92c6cfa8265f9d5 Mon Sep 17 00:00:00 2001 From: "gregkh@suse.de" Date: Wed, 23 Mar 2005 10:01:41 -0800 Subject: [PATCH] class: convert drivers/* to use the new class api instead of class_simple Signed-off-by: Greg Kroah-Hartman --- drivers/net/ppp_generic.c | 14 +++++++------- drivers/net/wan/cosa.c | 12 ++++++------ 2 files changed, 13 insertions(+), 13 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c index ad4b58af6b7..ab726ab4379 100644 --- a/drivers/net/ppp_generic.c +++ b/drivers/net/ppp_generic.c @@ -273,7 +273,7 @@ static int ppp_connect_channel(struct channel *pch, int unit); static int ppp_disconnect_channel(struct channel *pch); static void ppp_destroy_channel(struct channel *pch); -static struct class_simple *ppp_class; +static struct class *ppp_class; /* Translates a PPP protocol number to a NP index (NP == network protocol) */ static inline int proto_to_npindex(int proto) @@ -858,12 +858,12 @@ static int __init ppp_init(void) printk(KERN_INFO "PPP generic driver version " PPP_VERSION "\n"); err = register_chrdev(PPP_MAJOR, "ppp", &ppp_device_fops); if (!err) { - ppp_class = class_simple_create(THIS_MODULE, "ppp"); + ppp_class = class_create(THIS_MODULE, "ppp"); if (IS_ERR(ppp_class)) { err = PTR_ERR(ppp_class); goto out_chrdev; } - class_simple_device_add(ppp_class, MKDEV(PPP_MAJOR, 0), NULL, "ppp"); + class_device_create(ppp_class, MKDEV(PPP_MAJOR, 0), NULL, "ppp"); err = devfs_mk_cdev(MKDEV(PPP_MAJOR, 0), S_IFCHR|S_IRUSR|S_IWUSR, "ppp"); if (err) @@ -876,8 +876,8 @@ out: return err; out_class: - class_simple_device_remove(MKDEV(PPP_MAJOR,0)); - class_simple_destroy(ppp_class); + class_device_destroy(ppp_class, MKDEV(PPP_MAJOR,0)); + class_destroy(ppp_class); out_chrdev: unregister_chrdev(PPP_MAJOR, "ppp"); goto out; @@ -2654,8 +2654,8 @@ static void __exit ppp_cleanup(void) if (unregister_chrdev(PPP_MAJOR, "ppp") != 0) printk(KERN_ERR "PPP: failed to unregister PPP device\n"); devfs_remove("ppp"); - class_simple_device_remove(MKDEV(PPP_MAJOR, 0)); - class_simple_destroy(ppp_class); + class_device_destroy(ppp_class, MKDEV(PPP_MAJOR, 0)); + class_destroy(ppp_class); } /* diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c index 921a573372e..7ff814fd65d 100644 --- a/drivers/net/wan/cosa.c +++ b/drivers/net/wan/cosa.c @@ -235,7 +235,7 @@ static int dma[MAX_CARDS+1]; static int irq[MAX_CARDS+1] = { -1, -1, -1, -1, -1, -1, 0, }; /* for class stuff*/ -static struct class_simple *cosa_class; +static struct class *cosa_class; #ifdef MODULE module_param_array(io, int, NULL, 0); @@ -394,19 +394,19 @@ static int __init cosa_init(void) goto out; } devfs_mk_dir("cosa"); - cosa_class = class_simple_create(THIS_MODULE, "cosa"); + cosa_class = class_create(THIS_MODULE, "cosa"); if (IS_ERR(cosa_class)) { err = PTR_ERR(cosa_class); goto out_chrdev; } for (i=0; i Date: Tue, 21 Jun 2005 17:15:14 -0700 Subject: [PATCH] 3c59x: remove superfluous vortex_debug test from boomerang_start_xmit() Remove the superfluous test of "if (vortex_debug > 3)" inside the "if (vortex_debug > 6)" clause early in boomerang_start_xmit. Signed-off-by: John W. Linville Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/net/3c59x.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c index b5e07604343..80ec9aa575b 100644 --- a/drivers/net/3c59x.c +++ b/drivers/net/3c59x.c @@ -2202,9 +2202,8 @@ boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev) if (vortex_debug > 6) { printk(KERN_DEBUG "boomerang_start_xmit()\n"); - if (vortex_debug > 3) - printk(KERN_DEBUG "%s: Trying to send a packet, Tx index %d.\n", - dev->name, vp->cur_tx); + printk(KERN_DEBUG "%s: Trying to send a packet, Tx index %d.\n", + dev->name, vp->cur_tx); } if (vp->cur_tx - vp->dirty_tx >= TX_RING_SIZE) { -- cgit v1.2.3 From 0adbb44a146d6dff3f74ea7a9d3826f8942ed709 Mon Sep 17 00:00:00 2001 From: Hirokazu Takata Date: Tue, 21 Jun 2005 17:16:16 -0700 Subject: [PATCH] m32r: Remove include/asm-m32r/m32102peri.h This patch removes an obsolete header file include/asm-m32r/m32102peri.h. In this header, there are some undesirable single character types, like V. And the header is almost no longer used. Signed-off-by: Hayato Fujiwara Signed-off-by: Hirokazu Takata Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/net/8390.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/8390.c b/drivers/net/8390.c index bab16bcc9ae..6d76f3a99b1 100644 --- a/drivers/net/8390.c +++ b/drivers/net/8390.c @@ -225,9 +225,9 @@ void ei_tx_timeout(struct net_device *dev) unsigned long icucr; local_irq_save(flags); - icucr = inl(ICUCR1); + icucr = inl(M32R_ICU_CR1_PORTL); icucr |= M32R_ICUCR_ISMOD11; - outl(icucr, ICUCR1); + outl(icucr, M32R_ICU_CR1_PORTL); local_irq_restore(flags); #endif ei_local->stat.tx_errors++; -- cgit v1.2.3 From 2c4ee8f907fc4a3c69273a958f853bf4b358eb49 Mon Sep 17 00:00:00 2001 From: Nishanth Aravamudan Date: Wed, 22 Jun 2005 22:19:52 -0700 Subject: [LTPC]: Replace schedule_timeout() with ssleep()/msleep() Use ssleep() / msleep() [as appropriate] instead of schedule_timeout() to guarantee the task delays as expected. Signed-off-by: Nishanth Aravamudan Acked-by: Arnaldo Carvalho de Melo Signed-off-by: Maximilian Attems Signed-off-by: Domen Puncer Signed-off-by: David S. Miller --- drivers/net/appletalk/ltpc.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/appletalk/ltpc.c b/drivers/net/appletalk/ltpc.c index db4f369637b..d5666c37cb0 100644 --- a/drivers/net/appletalk/ltpc.c +++ b/drivers/net/appletalk/ltpc.c @@ -1109,8 +1109,7 @@ struct net_device * __init ltpc_probe(void) inb_p(io+1); inb_p(io+3); - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(2*HZ/100); + msleep(20); inb_p(io+0); inb_p(io+2); @@ -1120,8 +1119,7 @@ struct net_device * __init ltpc_probe(void) inb_p(io+5); /* enable dma */ inb_p(io+6); /* tri-state interrupt line */ - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(HZ); + ssleep(1); /* now, figure out which dma channel we're using, unless it's already been specified */ -- cgit v1.2.3 From b2b3d8247951f298897b395599849957ee271c55 Mon Sep 17 00:00:00 2001 From: Mitch Williams Date: Thu, 23 Jun 2005 03:41:00 -0400 Subject: e1000: fix spinlock bug This patch fixes an obvious and nasty bug where we could exit the transmit routine while holding tx_lock. Signed-off-by: Mitch Williams --- drivers/net/e1000/e1000_main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 325495b8b60..137226d98d4 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -2307,6 +2307,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) tso = e1000_tso(adapter, skb); if (tso < 0) { dev_kfree_skb_any(skb); + spin_unlock_irqrestore(&adapter->tx_lock, flags); return NETDEV_TX_OK; } -- cgit v1.2.3 From 64ccd715d3cf498318b14b646ce5f97e7ab15bb5 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 23 Jun 2005 00:10:33 -0700 Subject: [PATCH] Convert users to tty_unregister_ldisc() tty_register_ldisc(N_FOO, NULL) => tty_unregister_ldisc(N_FOO) Signed-off-by: Alexey Dobriyan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/net/hamradio/6pack.c | 2 +- drivers/net/hamradio/mkiss.c | 2 +- drivers/net/irda/irtty-sir.c | 2 +- drivers/net/ppp_async.c | 2 +- drivers/net/ppp_synctty.c | 2 +- drivers/net/slip.c | 2 +- drivers/net/wan/x25_asy.c | 2 +- drivers/net/wireless/strip.c | 2 +- 8 files changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c index 89454915b85..e44f8e9055e 100644 --- a/drivers/net/hamradio/6pack.c +++ b/drivers/net/hamradio/6pack.c @@ -848,7 +848,7 @@ static void __exit sixpack_exit_driver(void) { int ret; - if ((ret = tty_register_ldisc(N_6PACK, NULL))) + if ((ret = tty_unregister_ldisc(N_6PACK))) printk(msg_unregfail, ret); } diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c index 62790511098..3035422f5ad 100644 --- a/drivers/net/hamradio/mkiss.c +++ b/drivers/net/hamradio/mkiss.c @@ -934,7 +934,7 @@ static void __exit mkiss_exit_driver(void) kfree(ax25_ctrls); ax25_ctrls = NULL; - if ((i = tty_register_ldisc(N_AX25, NULL))) + if ((i = tty_unregister_ldisc(N_AX25))) printk(KERN_ERR "mkiss: can't unregister line discipline (err = %d)\n", i); } diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c index 7d23aa37590..b8d112348ba 100644 --- a/drivers/net/irda/irtty-sir.c +++ b/drivers/net/irda/irtty-sir.c @@ -626,7 +626,7 @@ static void __exit irtty_sir_cleanup(void) { int err; - if ((err = tty_register_ldisc(N_IRDA, NULL))) { + if ((err = tty_unregister_ldisc(N_IRDA))) { IRDA_ERROR("%s(), can't unregister line discipline (err = %d)\n", __FUNCTION__, err); } diff --git a/drivers/net/ppp_async.c b/drivers/net/ppp_async.c index 33b9d79b1aa..5e48b9ab304 100644 --- a/drivers/net/ppp_async.c +++ b/drivers/net/ppp_async.c @@ -1025,7 +1025,7 @@ static void async_lcp_peek(struct asyncppp *ap, unsigned char *data, static void __exit ppp_async_cleanup(void) { - if (tty_register_ldisc(N_PPP, NULL) != 0) + if (tty_unregister_ldisc(N_PPP) != 0) printk(KERN_ERR "failed to unregister PPP line discipline\n"); } diff --git a/drivers/net/ppp_synctty.c b/drivers/net/ppp_synctty.c index 7d0150b4c62..fd9f5018035 100644 --- a/drivers/net/ppp_synctty.c +++ b/drivers/net/ppp_synctty.c @@ -793,7 +793,7 @@ err: static void __exit ppp_sync_cleanup(void) { - if (tty_register_ldisc(N_SYNC_PPP, NULL) != 0) + if (tty_unregister_ldisc(N_SYNC_PPP) != 0) printk(KERN_ERR "failed to unregister Sync PPP line discipline\n"); } diff --git a/drivers/net/slip.c b/drivers/net/slip.c index 8f7841c0374..19112712daf 100644 --- a/drivers/net/slip.c +++ b/drivers/net/slip.c @@ -1430,7 +1430,7 @@ static void __exit slip_exit(void) kfree(slip_devs); slip_devs = NULL; - if ((i = tty_register_ldisc(N_SLIP, NULL))) + if ((i = tty_unregister_ldisc(N_SLIP))) { printk(KERN_ERR "SLIP: can't unregister line discipline (err = %d)\n", i); } diff --git a/drivers/net/wan/x25_asy.c b/drivers/net/wan/x25_asy.c index 1c540d82555..bdf672c4818 100644 --- a/drivers/net/wan/x25_asy.c +++ b/drivers/net/wan/x25_asy.c @@ -829,7 +829,7 @@ static void __exit exit_x25_asy(void) } kfree(x25_asy_devs); - tty_register_ldisc(N_X25, NULL); + tty_unregister_ldisc(N_X25); } module_init(init_x25_asy); diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c index ec8cf29ffce..6c42b573a95 100644 --- a/drivers/net/wireless/strip.c +++ b/drivers/net/wireless/strip.c @@ -2828,7 +2828,7 @@ static void __exit strip_exit_driver(void) /* Unregister with the /proc/net file here. */ proc_net_remove("strip"); - if ((i = tty_register_ldisc(N_STRIP, NULL))) + if ((i = tty_unregister_ldisc(N_STRIP))) printk(KERN_ERR "STRIP: can't unregister line discipline (err = %d)\n", i); printk(signoff); -- cgit v1.2.3 From 9b200b02a6c9cddca5132d64aa41156bbcddcbaa Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Thu, 23 Jun 2005 21:06:56 -0700 Subject: [SLIP]: Simplify sl_free_bufs() We can avoid assignments to the local variable 'tmp' and actually get rid of tmp alltogether in sl_free_bufs(). This patch does that. This is safe since both kfree() and slhc_free() handles NULL pointers gracefully. Signed-off-by: Jesper Juhl Signed-off-by: David S. Miller --- drivers/net/slip.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/slip.c b/drivers/net/slip.c index 19112712daf..c79e0ad4ba0 100644 --- a/drivers/net/slip.c +++ b/drivers/net/slip.c @@ -198,18 +198,12 @@ err_exit: static void sl_free_bufs(struct slip *sl) { - void * tmp; - /* Free all SLIP frame buffers. */ - tmp = xchg(&sl->rbuff, NULL); - kfree(tmp); - tmp = xchg(&sl->xbuff, NULL); - kfree(tmp); + kfree(xchg(&sl->rbuff, NULL)); + kfree(xchg(&sl->xbuff, NULL)); #ifdef SL_INCLUDE_CSLIP - tmp = xchg(&sl->cbuff, NULL); - kfree(tmp); - if ((tmp = xchg(&sl->slcomp, NULL)) != NULL) - slhc_free(tmp); + kfree(xchg(&sl->cbuff, NULL)); + slhc_free(xchg(&sl->slcomp, NULL)); #endif } -- cgit v1.2.3 From cd024c8baf9756759c57f0a19be639da8d3d4f8c Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 24 Jun 2005 20:17:10 -0700 Subject: [TG3]: Fix missing memory barriers and SD_STATUS_UPDATED bit clearing. There must be a rmb() between reading the status block tag and calling tg3_has_work(). This was missing in tg3_mis() and tg3_interrupt_tagged(). tg3_poll() got it right. Also, SD_STATUS_UPDATED must be cleared in the status block right before we call tg3_has_work(). Only tg3_poll() got this wrong. Based upon patches and commentary from Grant Grundler and Michael Chan. Signed-off-by: David S. Miller --- drivers/net/tg3.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index a0b8848049c..fef1d087107 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -2929,6 +2929,7 @@ static int tg3_poll(struct net_device *netdev, int *budget) if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) tp->last_tag = sblk->status_tag; rmb(); + sblk->status &= ~SD_STATUS_UPDATED; /* if no more work, tell net stack and NIC we're done */ done = !tg3_has_work(tp); @@ -2964,6 +2965,7 @@ static irqreturn_t tg3_msi(int irq, void *dev_id, struct pt_regs *regs) */ tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001); tp->last_tag = sblk->status_tag; + rmb(); sblk->status &= ~SD_STATUS_UPDATED; if (likely(tg3_has_work(tp))) netif_rx_schedule(dev); /* schedule NAPI poll */ @@ -3051,6 +3053,7 @@ static irqreturn_t tg3_interrupt_tagged(int irq, void *dev_id, struct pt_regs *r tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001); tp->last_tag = sblk->status_tag; + rmb(); sblk->status &= ~SD_STATUS_UPDATED; if (likely(tg3_has_work(tp))) netif_rx_schedule(dev); /* schedule NAPI poll */ -- cgit v1.2.3 From f47c11eeccc8820010992eb32dbe7370a08f8bd3 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 24 Jun 2005 20:18:35 -0700 Subject: [TG3]: Eliminate all hw IRQ handler spinlocks. Move all driver spinlocks to be taken at sw IRQ context only. This fixes the skb_copy() we were doing with hw IRQs disabled (which is illegal and triggers a BUG() with HIGHMEM enabled). It also simplifies the locking all over the driver tremendously. We accomplish this feat by creating a special sequence to synchronize with the hw IRQ handler using a binary state and synchronize_irq(). This idea is from Herbert Xu. Thanks to Michael Chan for helping to track down all of the race conditions in initial versions of this code. Signed-off-by: David S. Miller --- drivers/net/tg3.c | 304 +++++++++++++++++++++++------------------------------- drivers/net/tg3.h | 24 ++++- 2 files changed, 149 insertions(+), 179 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index fef1d087107..8b8aa2ad578 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -337,12 +337,10 @@ static struct { static void tg3_write_indirect_reg32(struct tg3 *tp, u32 off, u32 val) { if ((tp->tg3_flags & TG3_FLAG_PCIX_TARGET_HWBUG) != 0) { - unsigned long flags; - - spin_lock_irqsave(&tp->indirect_lock, flags); + spin_lock_bh(&tp->indirect_lock); pci_write_config_dword(tp->pdev, TG3PCI_REG_BASE_ADDR, off); pci_write_config_dword(tp->pdev, TG3PCI_REG_DATA, val); - spin_unlock_irqrestore(&tp->indirect_lock, flags); + spin_unlock_bh(&tp->indirect_lock); } else { writel(val, tp->regs + off); if ((tp->tg3_flags & TG3_FLAG_5701_REG_WRITE_BUG) != 0) @@ -353,12 +351,10 @@ static void tg3_write_indirect_reg32(struct tg3 *tp, u32 off, u32 val) static void _tw32_flush(struct tg3 *tp, u32 off, u32 val) { if ((tp->tg3_flags & TG3_FLAG_PCIX_TARGET_HWBUG) != 0) { - unsigned long flags; - - spin_lock_irqsave(&tp->indirect_lock, flags); + spin_lock_bh(&tp->indirect_lock); pci_write_config_dword(tp->pdev, TG3PCI_REG_BASE_ADDR, off); pci_write_config_dword(tp->pdev, TG3PCI_REG_DATA, val); - spin_unlock_irqrestore(&tp->indirect_lock, flags); + spin_unlock_bh(&tp->indirect_lock); } else { void __iomem *dest = tp->regs + off; writel(val, dest); @@ -398,28 +394,24 @@ static inline void _tw32_tx_mbox(struct tg3 *tp, u32 off, u32 val) static void tg3_write_mem(struct tg3 *tp, u32 off, u32 val) { - unsigned long flags; - - spin_lock_irqsave(&tp->indirect_lock, flags); + spin_lock_bh(&tp->indirect_lock); pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, off); pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_DATA, val); /* Always leave this as zero. */ pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, 0); - spin_unlock_irqrestore(&tp->indirect_lock, flags); + spin_unlock_bh(&tp->indirect_lock); } static void tg3_read_mem(struct tg3 *tp, u32 off, u32 *val) { - unsigned long flags; - - spin_lock_irqsave(&tp->indirect_lock, flags); + spin_lock_bh(&tp->indirect_lock); pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, off); pci_read_config_dword(tp->pdev, TG3PCI_MEM_WIN_DATA, val); /* Always leave this as zero. */ pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, 0); - spin_unlock_irqrestore(&tp->indirect_lock, flags); + spin_unlock_bh(&tp->indirect_lock); } static void tg3_disable_ints(struct tg3 *tp) @@ -443,7 +435,7 @@ static void tg3_enable_ints(struct tg3 *tp) tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, (tp->last_tag << 24)); tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW); - + tp->irq_sync = 0; tg3_cond_int(tp); } @@ -504,7 +496,8 @@ static inline void tg3_netif_start(struct tg3 *tp) * (such as after tg3_init_hw) */ netif_poll_enable(tp->dev); - tg3_cond_int(tp); + tp->hw_status->status |= SD_STATUS_UPDATED; + tg3_enable_ints(tp); } static void tg3_switch_clocks(struct tg3 *tp) @@ -2578,7 +2571,7 @@ static void tg3_tx(struct tg3 *tp) sw_idx = NEXT_TX(sw_idx); } - dev_kfree_skb_irq(skb); + dev_kfree_skb(skb); } tp->tx_cons = sw_idx; @@ -2884,11 +2877,8 @@ static int tg3_poll(struct net_device *netdev, int *budget) { struct tg3 *tp = netdev_priv(netdev); struct tg3_hw_status *sblk = tp->hw_status; - unsigned long flags; int done; - spin_lock_irqsave(&tp->lock, flags); - /* handle link change and other phy events */ if (!(tp->tg3_flags & (TG3_FLAG_USE_LINKCHG_REG | @@ -2896,7 +2886,9 @@ static int tg3_poll(struct net_device *netdev, int *budget) if (sblk->status & SD_STATUS_LINK_CHG) { sblk->status = SD_STATUS_UPDATED | (sblk->status & ~SD_STATUS_LINK_CHG); + spin_lock(&tp->lock); tg3_setup_phy(tp, 0); + spin_unlock(&tp->lock); } } @@ -2907,8 +2899,6 @@ static int tg3_poll(struct net_device *netdev, int *budget) spin_unlock(&tp->tx_lock); } - spin_unlock_irqrestore(&tp->lock, flags); - /* run RX thread, within the bounds set by NAPI. * All RX "locking" is done by ensuring outside * code synchronizes with dev->poll() @@ -2934,15 +2924,49 @@ static int tg3_poll(struct net_device *netdev, int *budget) /* if no more work, tell net stack and NIC we're done */ done = !tg3_has_work(tp); if (done) { - spin_lock_irqsave(&tp->lock, flags); - __netif_rx_complete(netdev); + spin_lock(&tp->lock); + netif_rx_complete(netdev); tg3_restart_ints(tp); - spin_unlock_irqrestore(&tp->lock, flags); + spin_unlock(&tp->lock); } return (done ? 0 : 1); } +static void tg3_irq_quiesce(struct tg3 *tp) +{ + BUG_ON(tp->irq_sync); + + tp->irq_sync = 1; + smp_mb(); + + synchronize_irq(tp->pdev->irq); +} + +static inline int tg3_irq_sync(struct tg3 *tp) +{ + return tp->irq_sync; +} + +/* Fully shutdown all tg3 driver activity elsewhere in the system. + * If irq_sync is non-zero, then the IRQ handler must be synchronized + * with as well. Most of the time, this is not necessary except when + * shutting down the device. + */ +static inline void tg3_full_lock(struct tg3 *tp, int irq_sync) +{ + if (irq_sync) + tg3_irq_quiesce(tp); + spin_lock_bh(&tp->lock); + spin_lock(&tp->tx_lock); +} + +static inline void tg3_full_unlock(struct tg3 *tp) +{ + spin_unlock(&tp->tx_lock); + spin_unlock_bh(&tp->lock); +} + /* MSI ISR - No need to check for interrupt sharing and no need to * flush status block and interrupt mailbox. PCI ordering rules * guarantee that MSI will arrive after the status block. @@ -2952,9 +2976,6 @@ static irqreturn_t tg3_msi(int irq, void *dev_id, struct pt_regs *regs) struct net_device *dev = dev_id; struct tg3 *tp = netdev_priv(dev); struct tg3_hw_status *sblk = tp->hw_status; - unsigned long flags; - - spin_lock_irqsave(&tp->lock, flags); /* * Writing any value to intr-mbox-0 clears PCI INTA# and @@ -2966,6 +2987,8 @@ static irqreturn_t tg3_msi(int irq, void *dev_id, struct pt_regs *regs) tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001); tp->last_tag = sblk->status_tag; rmb(); + if (tg3_irq_sync(tp)) + goto out; sblk->status &= ~SD_STATUS_UPDATED; if (likely(tg3_has_work(tp))) netif_rx_schedule(dev); /* schedule NAPI poll */ @@ -2974,9 +2997,7 @@ static irqreturn_t tg3_msi(int irq, void *dev_id, struct pt_regs *regs) tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, tp->last_tag << 24); } - - spin_unlock_irqrestore(&tp->lock, flags); - +out: return IRQ_RETVAL(1); } @@ -2985,11 +3006,8 @@ static irqreturn_t tg3_interrupt(int irq, void *dev_id, struct pt_regs *regs) struct net_device *dev = dev_id; struct tg3 *tp = netdev_priv(dev); struct tg3_hw_status *sblk = tp->hw_status; - unsigned long flags; unsigned int handled = 1; - spin_lock_irqsave(&tp->lock, flags); - /* In INTx mode, it is possible for the interrupt to arrive at * the CPU before the status block posted prior to the interrupt. * Reading the PCI State register will confirm whether the @@ -3006,6 +3024,8 @@ static irqreturn_t tg3_interrupt(int irq, void *dev_id, struct pt_regs *regs) */ tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001); + if (tg3_irq_sync(tp)) + goto out; sblk->status &= ~SD_STATUS_UPDATED; if (likely(tg3_has_work(tp))) netif_rx_schedule(dev); /* schedule NAPI poll */ @@ -3020,9 +3040,7 @@ static irqreturn_t tg3_interrupt(int irq, void *dev_id, struct pt_regs *regs) } else { /* shared interrupt */ handled = 0; } - - spin_unlock_irqrestore(&tp->lock, flags); - +out: return IRQ_RETVAL(handled); } @@ -3031,11 +3049,8 @@ static irqreturn_t tg3_interrupt_tagged(int irq, void *dev_id, struct pt_regs *r struct net_device *dev = dev_id; struct tg3 *tp = netdev_priv(dev); struct tg3_hw_status *sblk = tp->hw_status; - unsigned long flags; unsigned int handled = 1; - spin_lock_irqsave(&tp->lock, flags); - /* In INTx mode, it is possible for the interrupt to arrive at * the CPU before the status block posted prior to the interrupt. * Reading the PCI State register will confirm whether the @@ -3054,6 +3069,8 @@ static irqreturn_t tg3_interrupt_tagged(int irq, void *dev_id, struct pt_regs *r 0x00000001); tp->last_tag = sblk->status_tag; rmb(); + if (tg3_irq_sync(tp)) + goto out; sblk->status &= ~SD_STATUS_UPDATED; if (likely(tg3_has_work(tp))) netif_rx_schedule(dev); /* schedule NAPI poll */ @@ -3068,9 +3085,7 @@ static irqreturn_t tg3_interrupt_tagged(int irq, void *dev_id, struct pt_regs *r } else { /* shared interrupt */ handled = 0; } - - spin_unlock_irqrestore(&tp->lock, flags); - +out: return IRQ_RETVAL(handled); } @@ -3109,8 +3124,7 @@ static void tg3_reset_task(void *_data) tg3_netif_stop(tp); - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + tg3_full_lock(tp, 1); restart_timer = tp->tg3_flags2 & TG3_FLG2_RESTART_TIMER; tp->tg3_flags2 &= ~TG3_FLG2_RESTART_TIMER; @@ -3120,8 +3134,7 @@ static void tg3_reset_task(void *_data) tg3_netif_start(tp); - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); if (restart_timer) mod_timer(&tp->timer, jiffies + 1); @@ -3227,39 +3240,21 @@ static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev) unsigned int i; u32 len, entry, base_flags, mss; int would_hit_hwbug; - unsigned long flags; len = skb_headlen(skb); /* No BH disabling for tx_lock here. We are running in BH disabled * context and TX reclaim runs via tp->poll inside of a software - * interrupt. Rejoice! - * - * Actually, things are not so simple. If we are to take a hw - * IRQ here, we can deadlock, consider: - * - * CPU1 CPU2 - * tg3_start_xmit - * take tp->tx_lock - * tg3_timer - * take tp->lock - * tg3_interrupt - * spin on tp->lock - * spin on tp->tx_lock - * - * So we really do need to disable interrupts when taking - * tx_lock here. + * interrupt. Furthermore, IRQ processing runs lockless so we have + * no IRQ context deadlocks to worry about either. Rejoice! */ - local_irq_save(flags); - if (!spin_trylock(&tp->tx_lock)) { - local_irq_restore(flags); + if (!spin_trylock(&tp->tx_lock)) return NETDEV_TX_LOCKED; - } /* This is a hard error, log it. */ if (unlikely(TX_BUFFS_AVAIL(tp) <= (skb_shinfo(skb)->nr_frags + 1))) { netif_stop_queue(dev); - spin_unlock_irqrestore(&tp->tx_lock, flags); + spin_unlock(&tp->tx_lock); printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n", dev->name); return NETDEV_TX_BUSY; @@ -3424,7 +3419,7 @@ static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev) out_unlock: mmiowb(); - spin_unlock_irqrestore(&tp->tx_lock, flags); + spin_unlock(&tp->tx_lock); dev->trans_start = jiffies; @@ -3458,8 +3453,8 @@ static int tg3_change_mtu(struct net_device *dev, int new_mtu) } tg3_netif_stop(tp); - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + + tg3_full_lock(tp, 1); tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); @@ -3469,8 +3464,7 @@ static int tg3_change_mtu(struct net_device *dev, int new_mtu) tg3_netif_start(tp); - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); return 0; } @@ -5091,9 +5085,9 @@ static int tg3_set_mac_addr(struct net_device *dev, void *p) memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); - spin_lock_irq(&tp->lock); + spin_lock_bh(&tp->lock); __tg3_set_mac_addr(tp); - spin_unlock_irq(&tp->lock); + spin_unlock_bh(&tp->lock); return 0; } @@ -5805,10 +5799,8 @@ static void tg3_periodic_fetch_stats(struct tg3 *tp) static void tg3_timer(unsigned long __opaque) { struct tg3 *tp = (struct tg3 *) __opaque; - unsigned long flags; - spin_lock_irqsave(&tp->lock, flags); - spin_lock(&tp->tx_lock); + spin_lock(&tp->lock); if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) { /* All of this garbage is because when using non-tagged @@ -5825,8 +5817,7 @@ static void tg3_timer(unsigned long __opaque) if (!(tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) { tp->tg3_flags2 |= TG3_FLG2_RESTART_TIMER; - spin_unlock(&tp->tx_lock); - spin_unlock_irqrestore(&tp->lock, flags); + spin_unlock(&tp->lock); schedule_work(&tp->reset_task); return; } @@ -5894,8 +5885,7 @@ static void tg3_timer(unsigned long __opaque) tp->asf_counter = tp->asf_multiplier; } - spin_unlock(&tp->tx_lock); - spin_unlock_irqrestore(&tp->lock, flags); + spin_unlock(&tp->lock); tp->timer.expires = jiffies + tp->timer_offset; add_timer(&tp->timer); @@ -6010,14 +6000,12 @@ static int tg3_test_msi(struct tg3 *tp) /* Need to reset the chip because the MSI cycle may have terminated * with Master Abort. */ - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + tg3_full_lock(tp, 1); tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); err = tg3_init_hw(tp); - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); if (err) free_irq(tp->pdev->irq, dev); @@ -6030,14 +6018,12 @@ static int tg3_open(struct net_device *dev) struct tg3 *tp = netdev_priv(dev); int err; - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + tg3_full_lock(tp, 0); tg3_disable_ints(tp); tp->tg3_flags &= ~TG3_FLAG_INIT_COMPLETE; - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); /* The placement of this call is tied * to the setup and use of Host TX descriptors. @@ -6084,8 +6070,7 @@ static int tg3_open(struct net_device *dev) return err; } - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + tg3_full_lock(tp, 0); err = tg3_init_hw(tp); if (err) { @@ -6109,8 +6094,7 @@ static int tg3_open(struct net_device *dev) tp->timer.function = tg3_timer; } - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); if (err) { free_irq(tp->pdev->irq, dev); @@ -6126,8 +6110,7 @@ static int tg3_open(struct net_device *dev) err = tg3_test_msi(tp); if (err) { - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + tg3_full_lock(tp, 0); if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) { pci_disable_msi(tp->pdev); @@ -6137,22 +6120,19 @@ static int tg3_open(struct net_device *dev) tg3_free_rings(tp); tg3_free_consistent(tp); - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); return err; } } - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + tg3_full_lock(tp, 0); add_timer(&tp->timer); tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE; tg3_enable_ints(tp); - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); netif_start_queue(dev); @@ -6398,8 +6378,7 @@ static int tg3_close(struct net_device *dev) del_timer_sync(&tp->timer); - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + tg3_full_lock(tp, 1); #if 0 tg3_dump_state(tp); #endif @@ -6413,8 +6392,7 @@ static int tg3_close(struct net_device *dev) TG3_FLAG_GOT_SERDES_FLOWCTL); netif_carrier_off(tp->dev); - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); free_irq(tp->pdev->irq, dev); if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) { @@ -6451,16 +6429,15 @@ static unsigned long calc_crc_errors(struct tg3 *tp) if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) && (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 || GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)) { - unsigned long flags; u32 val; - spin_lock_irqsave(&tp->lock, flags); + spin_lock_bh(&tp->lock); if (!tg3_readphy(tp, 0x1e, &val)) { tg3_writephy(tp, 0x1e, val | 0x8000); tg3_readphy(tp, 0x14, &val); } else val = 0; - spin_unlock_irqrestore(&tp->lock, flags); + spin_unlock_bh(&tp->lock); tp->phy_crc_errors += val; @@ -6722,11 +6699,9 @@ static void tg3_set_rx_mode(struct net_device *dev) { struct tg3 *tp = netdev_priv(dev); - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + tg3_full_lock(tp, 0); __tg3_set_rx_mode(dev); - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); } #define TG3_REGDUMP_LEN (32 * 1024) @@ -6748,8 +6723,7 @@ static void tg3_get_regs(struct net_device *dev, memset(p, 0, TG3_REGDUMP_LEN); - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + tg3_full_lock(tp, 0); #define __GET_REG32(reg) (*(p)++ = tr32(reg)) #define GET_REG32_LOOP(base,len) \ @@ -6799,8 +6773,7 @@ do { p = (u32 *)(orig_p + (reg)); \ #undef GET_REG32_LOOP #undef GET_REG32_1 - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); } static int tg3_get_eeprom_len(struct net_device *dev) @@ -6976,8 +6949,7 @@ static int tg3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) return -EINVAL; } - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + tg3_full_lock(tp, 0); tp->link_config.autoneg = cmd->autoneg; if (cmd->autoneg == AUTONEG_ENABLE) { @@ -6993,8 +6965,7 @@ static int tg3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) if (netif_running(dev)) tg3_setup_phy(tp, 1); - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); return 0; } @@ -7030,12 +7001,12 @@ static int tg3_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) !(tp->tg3_flags & TG3_FLAG_SERDES_WOL_CAP)) return -EINVAL; - spin_lock_irq(&tp->lock); + spin_lock_bh(&tp->lock); if (wol->wolopts & WAKE_MAGIC) tp->tg3_flags |= TG3_FLAG_WOL_ENABLE; else tp->tg3_flags &= ~TG3_FLAG_WOL_ENABLE; - spin_unlock_irq(&tp->lock); + spin_unlock_bh(&tp->lock); return 0; } @@ -7075,7 +7046,7 @@ static int tg3_nway_reset(struct net_device *dev) if (!netif_running(dev)) return -EAGAIN; - spin_lock_irq(&tp->lock); + spin_lock_bh(&tp->lock); r = -EINVAL; tg3_readphy(tp, MII_BMCR, &bmcr); if (!tg3_readphy(tp, MII_BMCR, &bmcr) && @@ -7083,7 +7054,7 @@ static int tg3_nway_reset(struct net_device *dev) tg3_writephy(tp, MII_BMCR, bmcr | BMCR_ANRESTART); r = 0; } - spin_unlock_irq(&tp->lock); + spin_unlock_bh(&tp->lock); return r; } @@ -7114,8 +7085,7 @@ static int tg3_set_ringparam(struct net_device *dev, struct ethtool_ringparam *e if (netif_running(dev)) tg3_netif_stop(tp); - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + tg3_full_lock(tp, 0); tp->rx_pending = ering->rx_pending; @@ -7131,8 +7101,7 @@ static int tg3_set_ringparam(struct net_device *dev, struct ethtool_ringparam *e tg3_netif_start(tp); } - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); return 0; } @@ -7153,8 +7122,8 @@ static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam if (netif_running(dev)) tg3_netif_stop(tp); - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + tg3_full_lock(tp, 1); + if (epause->autoneg) tp->tg3_flags |= TG3_FLAG_PAUSE_AUTONEG; else @@ -7173,8 +7142,8 @@ static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam tg3_init_hw(tp); tg3_netif_start(tp); } - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + + tg3_full_unlock(tp); return 0; } @@ -7195,12 +7164,12 @@ static int tg3_set_rx_csum(struct net_device *dev, u32 data) return 0; } - spin_lock_irq(&tp->lock); + spin_lock_bh(&tp->lock); if (data) tp->tg3_flags |= TG3_FLAG_RX_CHECKSUMS; else tp->tg3_flags &= ~TG3_FLAG_RX_CHECKSUMS; - spin_unlock_irq(&tp->lock); + spin_unlock_bh(&tp->lock); return 0; } @@ -7722,8 +7691,7 @@ static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest, if (netif_running(dev)) tg3_netif_stop(tp); - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + tg3_full_lock(tp, 1); tg3_halt(tp, RESET_KIND_SUSPEND, 1); tg3_nvram_lock(tp); @@ -7745,14 +7713,14 @@ static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest, data[4] = 1; } - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); + if (tg3_test_interrupt(tp) != 0) { etest->flags |= ETH_TEST_FL_FAILED; data[5] = 1; } - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + + tg3_full_lock(tp, 0); tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); if (netif_running(dev)) { @@ -7760,8 +7728,8 @@ static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest, tg3_init_hw(tp); tg3_netif_start(tp); } - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + + tg3_full_unlock(tp); } } @@ -7782,9 +7750,9 @@ static int tg3_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) break; /* We have no PHY */ - spin_lock_irq(&tp->lock); + spin_lock_bh(&tp->lock); err = tg3_readphy(tp, data->reg_num & 0x1f, &mii_regval); - spin_unlock_irq(&tp->lock); + spin_unlock_bh(&tp->lock); data->val_out = mii_regval; @@ -7798,9 +7766,9 @@ static int tg3_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) if (!capable(CAP_NET_ADMIN)) return -EPERM; - spin_lock_irq(&tp->lock); + spin_lock_bh(&tp->lock); err = tg3_writephy(tp, data->reg_num & 0x1f, data->val_in); - spin_unlock_irq(&tp->lock); + spin_unlock_bh(&tp->lock); return err; @@ -7816,28 +7784,24 @@ static void tg3_vlan_rx_register(struct net_device *dev, struct vlan_group *grp) { struct tg3 *tp = netdev_priv(dev); - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + tg3_full_lock(tp, 0); tp->vlgrp = grp; /* Update RX_MODE_KEEP_VLAN_TAG bit in RX_MODE register. */ __tg3_set_rx_mode(dev); - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); } static void tg3_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) { struct tg3 *tp = netdev_priv(dev); - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + tg3_full_lock(tp, 0); if (tp->vlgrp) tp->vlgrp->vlan_devices[vid] = NULL; - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); } #endif @@ -10168,24 +10132,19 @@ static int tg3_suspend(struct pci_dev *pdev, pm_message_t state) del_timer_sync(&tp->timer); - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + tg3_full_lock(tp, 1); tg3_disable_ints(tp); - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); netif_device_detach(dev); - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + tg3_full_lock(tp, 0); tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); err = tg3_set_power_state(tp, pci_choose_state(pdev, state)); if (err) { - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + tg3_full_lock(tp, 0); tg3_init_hw(tp); @@ -10195,8 +10154,7 @@ static int tg3_suspend(struct pci_dev *pdev, pm_message_t state) netif_device_attach(dev); tg3_netif_start(tp); - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); } return err; @@ -10219,8 +10177,7 @@ static int tg3_resume(struct pci_dev *pdev) netif_device_attach(dev); - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + tg3_full_lock(tp, 0); tg3_init_hw(tp); @@ -10231,8 +10188,7 @@ static int tg3_resume(struct pci_dev *pdev) tg3_netif_start(tp); - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); return 0; } diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index 993f84c93dc..99c5f9675a5 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -2006,17 +2006,31 @@ struct tg3_ethtool_stats { struct tg3 { /* begin "general, frequently-used members" cacheline section */ + /* If the IRQ handler (which runs lockless) needs to be + * quiesced, the following bitmask state is used. The + * SYNC flag is set by non-IRQ context code to initiate + * the quiescence. + * + * When the IRQ handler notices that SYNC is set, it + * disables interrupts and returns. + * + * When all outstanding IRQ handlers have returned after + * the SYNC flag has been set, the setter can be assured + * that interrupts will no longer get run. + * + * In this way all SMP driver locks are never acquired + * in hw IRQ context, only sw IRQ context or lower. + */ + unsigned int irq_sync; + /* SMP locking strategy: * * lock: Held during all operations except TX packet * processing. * - * tx_lock: Held during tg3_start_xmit{,_4gbug} and tg3_tx + * tx_lock: Held during tg3_start_xmit and tg3_tx * - * If you want to shut up all asynchronous processing you must - * acquire both locks, 'lock' taken before 'tx_lock'. IRQs must - * be disabled to take 'lock' but only softirq disabling is - * necessary for acquisition of 'tx_lock'. + * Both of these locks are to be held with BH safety. */ spinlock_t lock; spinlock_t indirect_lock; -- cgit v1.2.3 From bbe832c09233738c100145fd535b6b8fc97640f6 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Fri, 24 Jun 2005 20:20:04 -0700 Subject: [TG3]: Refinements to new locking strategy. 1. Move tp->irq_sync = 0 to before the interrupt mailbox IO in tg3_enable_ints() so that the interrupt handler will always see irq_sync == 0 when interrupts are enabled. 2. Remove the tg3_enable_ints() call in tg3_reset_hw(). Interrupts are always enabled explicitly or through tg3_netif_start(). This is to prevent interrupts being enabled while poll is disabled. 3. Update trans_start with jiffies in tg3_netif_stop() to prevent false NETDEV WATCHDOG. 4. Pass in the proper irq_sync parameter to tg3_full_lock() depending on netif_running() in some of the ethtool set calls. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 34 ++++++++++++++++++++-------------- 1 file changed, 20 insertions(+), 14 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 8b8aa2ad578..04e747aa1a8 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -430,12 +430,14 @@ static inline void tg3_cond_int(struct tg3 *tp) static void tg3_enable_ints(struct tg3 *tp) { + tp->irq_sync = 0; + wmb(); + tw32(TG3PCI_MISC_HOST_CTRL, (tp->misc_host_ctrl & ~MISC_HOST_CTRL_MASK_PCI_INT)); tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, (tp->last_tag << 24)); tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW); - tp->irq_sync = 0; tg3_cond_int(tp); } @@ -484,6 +486,7 @@ static void tg3_restart_ints(struct tg3 *tp) static inline void tg3_netif_stop(struct tg3 *tp) { + tp->dev->trans_start = jiffies; /* prevent tx timeout */ netif_poll_disable(tp->dev); netif_tx_disable(tp->dev); } @@ -5724,9 +5727,6 @@ static int tg3_reset_hw(struct tg3 *tp) tg3_write_sig_post_reset(tp, RESET_KIND_INIT); - if (tp->tg3_flags & TG3_FLAG_INIT_COMPLETE) - tg3_enable_ints(tp); - return 0; } @@ -7076,16 +7076,19 @@ static void tg3_get_ringparam(struct net_device *dev, struct ethtool_ringparam * static int tg3_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ering) { struct tg3 *tp = netdev_priv(dev); + int irq_sync = 0; if ((ering->rx_pending > TG3_RX_RING_SIZE - 1) || (ering->rx_jumbo_pending > TG3_RX_JUMBO_RING_SIZE - 1) || (ering->tx_pending > TG3_TX_RING_SIZE - 1)) return -EINVAL; - if (netif_running(dev)) + if (netif_running(dev)) { tg3_netif_stop(tp); + irq_sync = 1; + } - tg3_full_lock(tp, 0); + tg3_full_lock(tp, irq_sync); tp->rx_pending = ering->rx_pending; @@ -7118,11 +7121,14 @@ static void tg3_get_pauseparam(struct net_device *dev, struct ethtool_pauseparam static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam *epause) { struct tg3 *tp = netdev_priv(dev); + int irq_sync = 0; - if (netif_running(dev)) + if (netif_running(dev)) { tg3_netif_stop(tp); + irq_sync = 1; + } - tg3_full_lock(tp, 1); + tg3_full_lock(tp, irq_sync); if (epause->autoneg) tp->tg3_flags |= TG3_FLAG_PAUSE_AUTONEG; @@ -7578,8 +7584,6 @@ static int tg3_test_loopback(struct tg3 *tp) tg3_abort_hw(tp, 1); - /* Clearing this flag to keep interrupts disabled */ - tp->tg3_flags &= ~TG3_FLAG_INIT_COMPLETE; tg3_reset_hw(tp); mac_mode = (tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK) | @@ -7688,10 +7692,14 @@ static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest, data[1] = 1; } if (etest->flags & ETH_TEST_FL_OFFLINE) { - if (netif_running(dev)) + int irq_sync = 0; + + if (netif_running(dev)) { tg3_netif_stop(tp); + irq_sync = 1; + } - tg3_full_lock(tp, 1); + tg3_full_lock(tp, irq_sync); tg3_halt(tp, RESET_KIND_SUSPEND, 1); tg3_nvram_lock(tp); @@ -10184,8 +10192,6 @@ static int tg3_resume(struct pci_dev *pdev) tp->timer.expires = jiffies + tp->timer_offset; add_timer(&tp->timer); - tg3_enable_ints(tp); - tg3_netif_start(tp); tg3_full_unlock(tp); -- cgit v1.2.3 From 5f70eaa0d5768775a7492f3e3841fcca94bb0d13 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 24 Jun 2005 20:21:01 -0700 Subject: [TG3]: Update driver version and reldate. Signed-off-by: David S. Miller --- drivers/net/tg3.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 04e747aa1a8..7e371b1209a 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -66,8 +66,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.31" -#define DRV_MODULE_RELDATE "June 8, 2005" +#define DRV_MODULE_VERSION "3.32" +#define DRV_MODULE_RELDATE "June 24, 2005" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 -- cgit v1.2.3 From c9ff7d6644827a7cc1b2ecf636112c4703f32633 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Sat, 25 Jun 2005 14:59:28 -0700 Subject: [PATCH] Remove duplicate file in Documentation/networking (drivers_net_wan_Kconfig) wanpipe.txt and wan-router.txt in Documentation/networking contain the exact same information (diff between the two shows no drivers/net/wan/Kconfig. Signed-off-by: Tobias Klauser Signed-off-by: Domen Puncer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/net/wan/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index 66b94668ddd..18c27e1e788 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -435,7 +435,7 @@ config VENDOR_SANGOMA the driver to support. If you have one or more of these cards, say M to this option; - and read . + and read . To compile this driver as a module, choose M here: the module will be called wanpipe. -- cgit v1.2.3 From 3e1d1d28d99dabe63c64f7f40f1ca1d646de1f73 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Fri, 24 Jun 2005 23:13:50 -0700 Subject: [PATCH] Cleanup patch for process freezing 1. Establish a simple API for process freezing defined in linux/include/sched.h: frozen(process) Check for frozen process freezing(process) Check if a process is being frozen freeze(process) Tell a process to freeze (go to refrigerator) thaw_process(process) Restart process frozen_process(process) Process is frozen now 2. Remove all references to PF_FREEZE and PF_FROZEN from all kernel sources except sched.h 3. Fix numerous locations where try_to_freeze is manually done by a driver 4. Remove the argument that is no longer necessary from two function calls. 5. Some whitespace cleanup 6. Clear potential race in refrigerator (provides an open window of PF_FREEZE cleared before setting PF_FROZEN, recalc_sigpending does not check PF_FROZEN). This patch does not address the problem of freeze_processes() violating the rule that a task may only modify its own flags by setting PF_FREEZE. This is not clean in an SMP environment. freeze(process) is therefore not SMP safe! Signed-off-by: Christoph Lameter Signed-off-by: Linus Torvalds --- drivers/net/8139too.c | 2 +- drivers/net/irda/sir_kthread.c | 3 +-- drivers/net/irda/stir4200.c | 4 ++-- drivers/net/wireless/airo.c | 2 +- 4 files changed, 5 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c index 047202c4d9a..5a4a08a7c95 100644 --- a/drivers/net/8139too.c +++ b/drivers/net/8139too.c @@ -1606,7 +1606,7 @@ static int rtl8139_thread (void *data) do { timeout = interruptible_sleep_on_timeout (&tp->thr_wait, timeout); /* make swsusp happy with our thread */ - try_to_freeze(PF_FREEZE); + try_to_freeze(); } while (!signal_pending (current) && (timeout > 0)); if (signal_pending (current)) { diff --git a/drivers/net/irda/sir_kthread.c b/drivers/net/irda/sir_kthread.c index 18cea109953..c65054364bc 100644 --- a/drivers/net/irda/sir_kthread.c +++ b/drivers/net/irda/sir_kthread.c @@ -135,8 +135,7 @@ static int irda_thread(void *startup) remove_wait_queue(&irda_rq_queue.kick, &wait); /* make swsusp happy with our thread */ - if (current->flags & PF_FREEZE) - refrigerator(PF_FREEZE); + try_to_freeze(); run_irda_queue(); } diff --git a/drivers/net/irda/stir4200.c b/drivers/net/irda/stir4200.c index 66f488c1371..15f207323d9 100644 --- a/drivers/net/irda/stir4200.c +++ b/drivers/net/irda/stir4200.c @@ -763,7 +763,7 @@ static int stir_transmit_thread(void *arg) { #ifdef CONFIG_PM /* if suspending, then power off and wait */ - if (unlikely(current->flags & PF_FREEZE)) { + if (unlikely(freezing(current))) { if (stir->receiving) receive_stop(stir); else @@ -771,7 +771,7 @@ static int stir_transmit_thread(void *arg) write_reg(stir, REG_CTRL1, CTRL1_TXPWD|CTRL1_RXPWD); - refrigerator(PF_FREEZE); + refrigerator(); if (change_speed(stir, stir->speed)) break; diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index fb10a2db63a..d72e0385e4f 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -2918,7 +2918,7 @@ static int airo_thread(void *data) { flush_signals(current); /* make swsusp happy with our thread */ - try_to_freeze(PF_FREEZE); + try_to_freeze(); if (test_bit(JOB_DIE, &ai->flags)) break; -- cgit v1.2.3