From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/parisc/wax.c | 140 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 140 insertions(+) create mode 100644 drivers/parisc/wax.c (limited to 'drivers/parisc/wax.c') diff --git a/drivers/parisc/wax.c b/drivers/parisc/wax.c new file mode 100644 index 00000000000..e547d7d024d --- /dev/null +++ b/drivers/parisc/wax.c @@ -0,0 +1,140 @@ +/* + * WAX Device Driver + * + * (c) Copyright 2000 The Puffin Group Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * by Helge Deller + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "gsc.h" + +#define WAX_GSC_IRQ 7 /* Hardcoded Interrupt for GSC */ + +static void wax_choose_irq(struct parisc_device *dev, void *ctrl) +{ + int irq; + + switch (dev->id.sversion) { + case 0x73: irq = 1; break; /* i8042 General */ + case 0x8c: irq = 6; break; /* Serial */ + case 0x90: irq = 10; break; /* EISA */ + default: return; /* Unknown */ + } + + gsc_asic_assign_irq(ctrl, irq, &dev->irq); + + switch (dev->id.sversion) { + case 0x73: irq = 2; break; /* i8042 High-priority */ + case 0x90: irq = 0; break; /* EISA NMI */ + default: return; /* No secondary IRQ */ + } + + gsc_asic_assign_irq(ctrl, irq, &dev->aux_irq); +} + +static void __init +wax_init_irq(struct gsc_asic *wax) +{ + unsigned long base = wax->hpa; + + /* Wax-off */ + gsc_writel(0x00000000, base+OFFSET_IMR); + + /* clear pending interrupts */ + gsc_readl(base+OFFSET_IRR); + + /* We're not really convinced we want to reset the onboard + * devices. Firmware does it for us... + */ + + /* Resets */ +// gsc_writel(0xFFFFFFFF, base+0x1000); /* HIL */ +// gsc_writel(0xFFFFFFFF, base+0x2000); /* RS232-B on Wax */ +} + +int __init +wax_init_chip(struct parisc_device *dev) +{ + struct gsc_asic *wax; + struct parisc_device *parent; + struct gsc_irq gsc_irq; + int ret; + + wax = kmalloc(sizeof(*wax), GFP_KERNEL); + if (!wax) + return -ENOMEM; + + wax->name = "wax"; + wax->hpa = dev->hpa; + + wax->version = 0; /* gsc_readb(wax->hpa+WAX_VER); */ + printk(KERN_INFO "%s at 0x%lx found.\n", wax->name, wax->hpa); + + /* Stop wax hissing for a bit */ + wax_init_irq(wax); + + /* the IRQ wax should use */ + dev->irq = gsc_claim_irq(&gsc_irq, WAX_GSC_IRQ); + if (dev->irq < 0) { + printk(KERN_ERR "%s(): cannot get GSC irq\n", + __FUNCTION__); + kfree(wax); + return -EBUSY; + } + + wax->eim = ((u32) gsc_irq.txn_addr) | gsc_irq.txn_data; + + ret = request_irq(gsc_irq.irq, gsc_asic_intr, 0, "wax", wax); + if (ret < 0) { + kfree(wax); + return ret; + } + + /* enable IRQ's for devices below WAX */ + gsc_writel(wax->eim, wax->hpa + OFFSET_IAR); + + /* Done init'ing, register this driver */ + ret = gsc_common_setup(dev, wax); + if (ret) { + kfree(wax); + return ret; + } + + gsc_fixup_irqs(dev, wax, wax_choose_irq); + /* On 715-class machines, Wax EISA is a sibling of Wax, not a child. */ + parent = parisc_parent(dev); + if (parent->id.hw_type != HPHW_IOA) { + gsc_fixup_irqs(parent, wax, wax_choose_irq); + } + + return ret; +} + +static struct parisc_device_id wax_tbl[] = { + { HPHW_BA, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008e }, + { 0, } +}; + +MODULE_DEVICE_TABLE(parisc, wax_tbl); + +struct parisc_driver wax_driver = { + .name = "wax", + .id_table = wax_tbl, + .probe = wax_init_chip, +}; -- cgit v1.2.3