From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/parport/Kconfig | 145 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 145 insertions(+) create mode 100644 drivers/parport/Kconfig (limited to 'drivers/parport/Kconfig') diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig new file mode 100644 index 00000000000..731010e0e6f --- /dev/null +++ b/drivers/parport/Kconfig @@ -0,0 +1,145 @@ +# +# For a description of the syntax of this configuration file, +# see Documentation/kbuild/kconfig-language.txt. +# +# Parport configuration. +# + +menu "Parallel port support" + +config PARPORT + tristate "Parallel port support" + ---help--- + If you want to use devices connected to your machine's parallel port + (the connector at the computer with 25 holes), e.g. printer, ZIP + drive, PLIP link (Parallel Line Internet Protocol is mainly used to + create a mini network by connecting the parallel ports of two local + machines) etc., then you need to say Y here; please read + and + . + + For extensive information about drivers for many devices attaching + to the parallel port see on + the WWW. + + It is possible to share a single parallel port among several devices + and it is safe to compile all the corresponding drivers into the + kernel. To compile parallel port support as a module, choose M here: + the module will be called parport. + If you have more than one parallel port and want to specify which + port and IRQ to be used by this driver at module load time, take a + look at . + + If unsure, say Y. + +config PARPORT_PC + tristate "PC-style hardware" + depends on PARPORT && (!SPARC64 || PCI) && (!SPARC32 || BROKEN) + ---help--- + You should say Y here if you have a PC-style parallel port. All + IBM PC compatible computers and some Alphas have PC-style + parallel ports. PA-RISC owners should only say Y here if they + have a SuperIO parallel port. + + To compile this driver as a module, choose M here: the + module will be called parport_pc. + + If unsure, say Y. + +config PARPORT_SERIAL + tristate "Multi-IO cards (parallel and serial)" + depends on SERIAL_8250 && PARPORT_PC && PCI + help + This adds support for multi-IO PCI cards that have parallel and + serial ports. You should say Y or M here. If you say M, the module + will be called parport_serial. + +config PARPORT_PC_FIFO + bool "Use FIFO/DMA if available (EXPERIMENTAL)" + depends on PARPORT_PC && EXPERIMENTAL + help + Many parallel port chipsets provide hardware that can speed up + printing. Say Y here if you want to take advantage of that. + + As well as actually having a FIFO, or DMA capability, the kernel + will need to know which IRQ the parallel port has. By default, + parallel port interrupts will not be used, and so neither will the + FIFO. See to find out how to + specify which IRQ/DMA to use. + +config PARPORT_PC_SUPERIO + bool "SuperIO chipset support (EXPERIMENTAL)" + depends on PARPORT_PC && EXPERIMENTAL + help + Saying Y here enables some probes for Super-IO chipsets in order to + find out things like base addresses, IRQ lines and DMA channels. It + is safe to say N. + +config PARPORT_PC_PCMCIA + tristate "Support for PCMCIA management for PC-style ports" + depends on PARPORT!=n && (PCMCIA!=n && PARPORT_PC=m && PARPORT_PC || PARPORT_PC=y && PCMCIA) + help + Say Y here if you need PCMCIA support for your PC-style parallel + ports. If unsure, say N. + +config PARPORT_NOT_PC + bool + +config PARPORT_ARC + tristate "Archimedes hardware" + depends on ARM && PARPORT + select PARPORT_NOT_PC + +config PARPORT_AMIGA + tristate "Amiga builtin port" + depends on AMIGA && PARPORT + select PARPORT_NOT_PC + help + Say Y here if you need support for the parallel port hardware on + Amiga machines. This code is also available as a module (say M), + called parport_amiga. If in doubt, saying N is the safe plan. + +config PARPORT_MFC3 + tristate "Multiface III parallel port" + depends on ZORRO && PARPORT + select PARPORT_NOT_PC + help + Say Y here if you need parallel port support for the MFC3 card. + This code is also available as a module (say M), called + parport_mfc3. If in doubt, saying N is the safe plan. + +config PARPORT_ATARI + tristate "Atari hardware" + depends on ATARI && PARPORT + select PARPORT_NOT_PC + help + Say Y here if you need support for the parallel port hardware on + Atari machines. This code is also available as a module (say M), + called parport_atari. If in doubt, saying N is the safe plan. + +config PARPORT_GSC + tristate + default GSC + depends on PARPORT + +config PARPORT_SUNBPP + tristate "Sparc hardware (EXPERIMENTAL)" + depends on SBUS && PARPORT && EXPERIMENTAL + select PARPORT_NOT_PC + help + This driver provides support for the bidirectional parallel port + found on many Sun machines. Note that many of the newer Ultras + actually have pc style hardware instead. + +config PARPORT_1284 + bool "IEEE 1284 transfer modes" + depends on PARPORT + help + If you have a printer that supports status readback or device ID, or + want to use a device that uses enhanced parallel port transfer modes + such as EPP and ECP, say Y here to enable advanced IEEE 1284 + transfer modes. Also say Y if you want device ID information to + appear in /proc/sys/dev/parport/*/autoprobe*. It is safe to say N. + +endmenu + -- cgit v1.2.3