From a5766f11cfd3a0c03450d99c8fe548c2940be884 Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Fri, 10 Oct 2008 13:22:20 +0100 Subject: regulator: core - Rework machine API to remove string based functions. This improves the machine level API in order to configure regulator constraints and consumers as platform data and removes the old string based API that required several calls to set up each regulator. The intention is to create a struct regulator_init_data, populate it's fields with constraints, consumers devices, etc and then register the regulator device from board.c in the standard Linux way. e.g. regulator LDO2 (supplying codec and sim) platform data. /* regulator LDO2 consumer devices */ static struct regulator_consumer_supply ldo2_consumers[] = { { .dev = &platform_audio_device.dev, .supply = "codec_avdd", }, { .dev = &platform_sim_device.dev, .supply = "sim_vcc", } }; /* regulator LDO2 constraints */ static struct regulator_init_data ldo2_data = { .constraints = { .min_uV = 3300000, .max_uV = 3300000, .valid_modes_mask = REGULATOR_MODE_NORMAL, .apply_uV = 1, }, .num_consumer_supplies = ARRAY_SIZE(ldo2_consumers), .consumer_supplies = ldo2_consumers, }; /* machine regulator devices with thier consumers and constraints */ static struct platform_device wm8350_regulator_devices[] = { { .name = "wm8350-regulator", .id = WM8350_LDO_2, .dev = { .platform_data = &ldo2_data, }, }, }; Changes in detail:- o Removed all const char* regulator config functions in machine API. o Created new struct regulator_init_data to contain regulator machine configuration constraints and consmuers. o Changed set_supply(), set_machine_constraints(), set_consumer_device_supply() to remove their string identifier parameters. Also made them static and moved functions nearer top of core.c. o Removed no longer used inline func to_rdev() o Added regulator_get_init_drvdata() to retrieve init data. o Added struct device* as parameter to regulator_register(). o Changed my email address. Signed-off-by: Eric Miao Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/bq24022.c | 21 +- drivers/regulator/core.c | 457 ++++++++++++++++++++++---------------------- 2 files changed, 235 insertions(+), 243 deletions(-) (limited to 'drivers/regulator') diff --git a/drivers/regulator/bq24022.c b/drivers/regulator/bq24022.c index 263699d6152..366565aba86 100644 --- a/drivers/regulator/bq24022.c +++ b/drivers/regulator/bq24022.c @@ -18,13 +18,13 @@ #include #include + static int bq24022_set_current_limit(struct regulator_dev *rdev, int min_uA, int max_uA) { - struct platform_device *pdev = rdev_get_drvdata(rdev); - struct bq24022_mach_info *pdata = pdev->dev.platform_data; + struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev); - dev_dbg(&pdev->dev, "setting current limit to %s mA\n", + dev_dbg(rdev_get_dev(rdev), "setting current limit to %s mA\n", max_uA >= 500000 ? "500" : "100"); /* REVISIT: maybe return error if min_uA != 0 ? */ @@ -34,18 +34,16 @@ static int bq24022_set_current_limit(struct regulator_dev *rdev, static int bq24022_get_current_limit(struct regulator_dev *rdev) { - struct platform_device *pdev = rdev_get_drvdata(rdev); - struct bq24022_mach_info *pdata = pdev->dev.platform_data; + struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev); return gpio_get_value(pdata->gpio_iset2) ? 500000 : 100000; } static int bq24022_enable(struct regulator_dev *rdev) { - struct platform_device *pdev = rdev_get_drvdata(rdev); - struct bq24022_mach_info *pdata = pdev->dev.platform_data; + struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev); - dev_dbg(&pdev->dev, "enabling charger\n"); + dev_dbg(rdev_get_dev(rdev), "enabling charger\n"); gpio_set_value(pdata->gpio_nce, 0); return 0; @@ -53,10 +51,9 @@ static int bq24022_enable(struct regulator_dev *rdev) static int bq24022_disable(struct regulator_dev *rdev) { - struct platform_device *pdev = rdev_get_drvdata(rdev); - struct bq24022_mach_info *pdata = pdev->dev.platform_data; + struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev); - dev_dbg(&pdev->dev, "disabling charger\n"); + dev_dbg(rdev_get_dev(rdev), "disabling charger\n"); gpio_set_value(pdata->gpio_nce, 1); return 0; @@ -108,7 +105,7 @@ static int __init bq24022_probe(struct platform_device *pdev) ret = gpio_direction_output(pdata->gpio_iset2, 0); ret = gpio_direction_output(pdata->gpio_nce, 1); - bq24022 = regulator_register(&bq24022_desc, pdev); + bq24022 = regulator_register(&bq24022_desc, &pdev->dev, pdata); if (IS_ERR(bq24022)) { dev_dbg(&pdev->dev, "couldn't register regulator\n"); ret = PTR_ERR(bq24022); diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 9c798626156..84202eaace5 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2,8 +2,9 @@ * core.c -- Voltage/Current Regulator framework. * * Copyright 2007, 2008 Wolfson Microelectronics PLC. + * Copyright 2008 SlimLogic Ltd. * - * Author: Liam Girdwood + * Author: Liam Girdwood * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -64,14 +65,9 @@ struct regulator_map { struct list_head list; struct device *dev; const char *supply; - const char *regulator; + struct regulator_dev *regulator; }; -static inline struct regulator_dev *to_rdev(struct device *d) -{ - return container_of(d, struct regulator_dev, dev); -} - /* * struct regulator * @@ -227,7 +223,7 @@ static ssize_t device_requested_uA_show(struct device *dev, static ssize_t regulator_uV_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); ssize_t ret; mutex_lock(&rdev->mutex); @@ -240,7 +236,7 @@ static ssize_t regulator_uV_show(struct device *dev, static ssize_t regulator_uA_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); return sprintf(buf, "%d\n", _regulator_get_current_limit(rdev)); } @@ -248,7 +244,7 @@ static ssize_t regulator_uA_show(struct device *dev, static ssize_t regulator_opmode_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); int mode = _regulator_get_mode(rdev); switch (mode) { @@ -267,7 +263,7 @@ static ssize_t regulator_opmode_show(struct device *dev, static ssize_t regulator_state_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); int state = _regulator_is_enabled(rdev); if (state > 0) @@ -281,7 +277,7 @@ static ssize_t regulator_state_show(struct device *dev, static ssize_t regulator_min_uA_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "constraint not defined\n"); @@ -292,7 +288,7 @@ static ssize_t regulator_min_uA_show(struct device *dev, static ssize_t regulator_max_uA_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "constraint not defined\n"); @@ -303,7 +299,7 @@ static ssize_t regulator_max_uA_show(struct device *dev, static ssize_t regulator_min_uV_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "constraint not defined\n"); @@ -314,7 +310,7 @@ static ssize_t regulator_min_uV_show(struct device *dev, static ssize_t regulator_max_uV_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "constraint not defined\n"); @@ -325,7 +321,7 @@ static ssize_t regulator_max_uV_show(struct device *dev, static ssize_t regulator_total_uA_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); struct regulator *regulator; int uA = 0; @@ -339,14 +335,14 @@ static ssize_t regulator_total_uA_show(struct device *dev, static ssize_t regulator_num_users_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); return sprintf(buf, "%d\n", rdev->use_count); } static ssize_t regulator_type_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); switch (rdev->desc->type) { case REGULATOR_VOLTAGE: @@ -360,7 +356,7 @@ static ssize_t regulator_type_show(struct device *dev, static ssize_t regulator_suspend_mem_uV_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -370,7 +366,7 @@ static ssize_t regulator_suspend_mem_uV_show(struct device *dev, static ssize_t regulator_suspend_disk_uV_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -380,7 +376,7 @@ static ssize_t regulator_suspend_disk_uV_show(struct device *dev, static ssize_t regulator_suspend_standby_uV_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -406,7 +402,7 @@ static ssize_t suspend_opmode_show(struct regulator_dev *rdev, static ssize_t regulator_suspend_mem_mode_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -417,7 +413,7 @@ static ssize_t regulator_suspend_mem_mode_show(struct device *dev, static ssize_t regulator_suspend_disk_mode_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -428,7 +424,7 @@ static ssize_t regulator_suspend_disk_mode_show(struct device *dev, static ssize_t regulator_suspend_standby_mode_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -439,7 +435,7 @@ static ssize_t regulator_suspend_standby_mode_show(struct device *dev, static ssize_t regulator_suspend_mem_state_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -453,7 +449,7 @@ static ssize_t regulator_suspend_mem_state_show(struct device *dev, static ssize_t regulator_suspend_disk_state_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -467,7 +463,7 @@ static ssize_t regulator_suspend_disk_state_show(struct device *dev, static ssize_t regulator_suspend_standby_state_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -512,7 +508,7 @@ static struct device_attribute regulator_dev_attrs[] = { static void regulator_dev_release(struct device *dev) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); kfree(rdev); } @@ -569,8 +565,11 @@ static int suspend_set_state(struct regulator_dev *rdev, /* enable & disable are mandatory for suspend control */ if (!rdev->desc->ops->set_suspend_enable || - !rdev->desc->ops->set_suspend_disable) + !rdev->desc->ops->set_suspend_disable) { + printk(KERN_ERR "%s: no way to set suspend state\n", + __func__); return -EINVAL; + } if (rstate->enabled) ret = rdev->desc->ops->set_suspend_enable(rdev); @@ -656,6 +655,125 @@ static void print_constraints(struct regulator_dev *rdev) printk(KERN_INFO "regulator: %s: %s\n", rdev->desc->name, buf); } +/** + * set_machine_constraints - sets regulator constraints + * @regulator: regulator source + * + * Allows platform initialisation code to define and constrain + * regulator circuits e.g. valid voltage/current ranges, etc. NOTE: + * Constraints *must* be set by platform code in order for some + * regulator operations to proceed i.e. set_voltage, set_current_limit, + * set_mode. + */ +static int set_machine_constraints(struct regulator_dev *rdev, + struct regulation_constraints *constraints) +{ + int ret = 0; + + rdev->constraints = constraints; + + /* do we need to apply the constraint voltage */ + if (rdev->constraints->apply_uV && + rdev->constraints->min_uV == rdev->constraints->max_uV && + rdev->desc->ops->set_voltage) { + ret = rdev->desc->ops->set_voltage(rdev, + rdev->constraints->min_uV, rdev->constraints->max_uV); + if (ret < 0) { + printk(KERN_ERR "%s: failed to apply %duV" + " constraint\n", __func__, + rdev->constraints->min_uV); + rdev->constraints = NULL; + goto out; + } + } + + /* are we enabled at boot time by firmware / bootloader */ + if (rdev->constraints->boot_on) + rdev->use_count = 1; + + /* do we need to setup our suspend state */ + if (constraints->initial_state) + ret = suspend_prepare(rdev, constraints->initial_state); + + print_constraints(rdev); +out: + return ret; +} + +/** + * set_supply - set regulator supply regulator + * @regulator: regulator name + * @supply: supply regulator name + * + * Called by platform initialisation code to set the supply regulator for this + * regulator. This ensures that a regulators supply will also be enabled by the + * core if it's child is enabled. + */ +static int set_supply(struct regulator_dev *rdev, + struct regulator_dev *supply_rdev) +{ + int err; + + err = sysfs_create_link(&rdev->dev.kobj, &supply_rdev->dev.kobj, + "supply"); + if (err) { + printk(KERN_ERR + "%s: could not add device link %s err %d\n", + __func__, supply_rdev->dev.kobj.name, err); + goto out; + } + rdev->supply = supply_rdev; + list_add(&rdev->slist, &supply_rdev->supply_list); +out: + return err; +} + +/** + * set_consumer_device_supply: Bind a regulator to a symbolic supply + * @regulator: regulator source + * @dev: device the supply applies to + * @supply: symbolic name for supply + * + * Allows platform initialisation code to map physical regulator + * sources to symbolic names for supplies for use by devices. Devices + * should use these symbolic names to request regulators, avoiding the + * need to provide board-specific regulator names as platform data. + */ +static int set_consumer_device_supply(struct regulator_dev *rdev, + struct device *consumer_dev, const char *supply) +{ + struct regulator_map *node; + + if (supply == NULL) + return -EINVAL; + + node = kmalloc(sizeof(struct regulator_map), GFP_KERNEL); + if (node == NULL) + return -ENOMEM; + + node->regulator = rdev; + node->dev = consumer_dev; + node->supply = supply; + + list_add(&node->list, ®ulator_map_list); + return 0; +} + +static void unset_consumer_device_supply(struct regulator_dev *rdev, + struct device *consumer_dev) +{ + struct regulator_map *node, *n; + + list_for_each_entry_safe(node, n, ®ulator_map_list, list) { + if (rdev == node->regulator && + consumer_dev == node->dev) { + list_del(&node->list); + kfree(node); + return; + } + } +} + #define REG_STR_SIZE 32 static struct regulator *create_regulator(struct regulator_dev *rdev, @@ -746,7 +864,6 @@ struct regulator *regulator_get(struct device *dev, const char *id) struct regulator_dev *rdev; struct regulator_map *map; struct regulator *regulator = ERR_PTR(-ENODEV); - const char *supply = id; if (id == NULL) { printk(KERN_ERR "regulator: get() with no identifier\n"); @@ -758,15 +875,9 @@ struct regulator *regulator_get(struct device *dev, const char *id) list_for_each_entry(map, ®ulator_map_list, list) { if (dev == map->dev && strcmp(map->supply, id) == 0) { - supply = map->regulator; - break; - } - } - - list_for_each_entry(rdev, ®ulator_list, list) { - if (strcmp(supply, rdev->desc->name) == 0 && - try_module_get(rdev->owner)) + rdev = map->regulator; goto found; + } } printk(KERN_ERR "regulator: Unable to get requested regulator: %s\n", id); @@ -774,12 +885,16 @@ struct regulator *regulator_get(struct device *dev, const char *id) return regulator; found: + if (!try_module_get(rdev->owner)) + goto out; + regulator = create_regulator(rdev, dev, id); if (regulator == NULL) { regulator = ERR_PTR(-ENOMEM); module_put(rdev->owner); } +out: mutex_unlock(®ulator_list_mutex); return regulator; } @@ -1559,11 +1674,12 @@ EXPORT_SYMBOL_GPL(regulator_notifier_call_chain); * Returns 0 on success. */ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, - void *reg_data) + struct device *dev, void *driver_data) { static atomic_t regulator_no = ATOMIC_INIT(0); struct regulator_dev *rdev; - int ret; + struct regulator_init_data *init_data = dev->platform_data; + int ret, i; if (regulator_desc == NULL) return ERR_PTR(-EINVAL); @@ -1582,7 +1698,7 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, mutex_lock(®ulator_list_mutex); mutex_init(&rdev->mutex); - rdev->reg_data = reg_data; + rdev->reg_data = driver_data; rdev->owner = regulator_desc->owner; rdev->desc = regulator_desc; INIT_LIST_HEAD(&rdev->consumer_list); @@ -1591,20 +1707,68 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, INIT_LIST_HEAD(&rdev->slist); BLOCKING_INIT_NOTIFIER_HEAD(&rdev->notifier); + /* preform any regulator specific init */ + if (init_data->regulator_init) { + ret = init_data->regulator_init(rdev->reg_data); + if (ret < 0) { + kfree(rdev); + rdev = ERR_PTR(ret); + goto out; + } + } + + /* set regulator constraints */ + ret = set_machine_constraints(rdev, &init_data->constraints); + if (ret < 0) { + kfree(rdev); + rdev = ERR_PTR(ret); + goto out; + } + + /* register with sysfs */ rdev->dev.class = ®ulator_class; - device_initialize(&rdev->dev); + rdev->dev.parent = dev; snprintf(rdev->dev.bus_id, sizeof(rdev->dev.bus_id), - "regulator_%ld_%s", - (unsigned long)atomic_inc_return(®ulator_no) - 1, - regulator_desc->name); - - ret = device_add(&rdev->dev); - if (ret == 0) - list_add(&rdev->list, ®ulator_list); - else { + "regulator.%d", atomic_inc_return(®ulator_no) - 1); + ret = device_register(&rdev->dev); + if (ret != 0) { kfree(rdev); rdev = ERR_PTR(ret); + goto out; + } + + dev_set_drvdata(&rdev->dev, rdev); + + /* set supply regulator if it exists */ + if (init_data->supply_regulator_dev) { + ret = set_supply(rdev, + dev_get_drvdata(init_data->supply_regulator_dev)); + if (ret < 0) { + device_unregister(&rdev->dev); + kfree(rdev); + rdev = ERR_PTR(ret); + goto out; + } + } + + /* add consumers devices */ + for (i = 0; i < init_data->num_consumer_supplies; i++) { + ret = set_consumer_device_supply(rdev, + init_data->consumer_supplies[i].dev, + init_data->consumer_supplies[i].supply); + if (ret < 0) { + for (--i; i >= 0; i--) + unset_consumer_device_supply(rdev, + init_data->consumer_supplies[i].dev); + device_unregister(&rdev->dev); + kfree(rdev); + rdev = ERR_PTR(ret); + goto out; + } } + + list_add(&rdev->list, ®ulator_list); +out: mutex_unlock(®ulator_list_mutex); return rdev; } @@ -1630,187 +1794,6 @@ void regulator_unregister(struct regulator_dev *rdev) } EXPORT_SYMBOL_GPL(regulator_unregister); -/** - * regulator_set_supply - set regulator supply regulator - * @regulator: regulator name - * @supply: supply regulator name - * - * Called by platform initialisation code to set the supply regulator for this - * regulator. This ensures that a regulators supply will also be enabled by the - * core if it's child is enabled. - */ -int regulator_set_supply(const char *regulator, const char *supply) -{ - struct regulator_dev *rdev, *supply_rdev; - int err; - - if (regulator == NULL || supply == NULL) - return -EINVAL; - - mutex_lock(®ulator_list_mutex); - - list_for_each_entry(rdev, ®ulator_list, list) { - if (!strcmp(rdev->desc->name, regulator)) - goto found_regulator; - } - mutex_unlock(®ulator_list_mutex); - return -ENODEV; - -found_regulator: - list_for_each_entry(supply_rdev, ®ulator_list, list) { - if (!strcmp(supply_rdev->desc->name, supply)) - goto found_supply; - } - mutex_unlock(®ulator_list_mutex); - return -ENODEV; - -found_supply: - err = sysfs_create_link(&rdev->dev.kobj, &supply_rdev->dev.kobj, - "supply"); - if (err) { - printk(KERN_ERR - "%s: could not add device link %s err %d\n", - __func__, supply_rdev->dev.kobj.name, err); - goto out; - } - rdev->supply = supply_rdev; - list_add(&rdev->slist, &supply_rdev->supply_list); -out: - mutex_unlock(®ulator_list_mutex); - return err; -} -EXPORT_SYMBOL_GPL(regulator_set_supply); - -/** - * regulator_get_supply - get regulator supply regulator - * @regulator: regulator name - * - * Returns the supply supply regulator name or NULL if no supply regulator - * exists (i.e the regulator is supplied directly from USB, Line, Battery, etc) - */ -const char *regulator_get_supply(const char *regulator) -{ - struct regulator_dev *rdev; - - if (regulator == NULL) - return NULL; - - mutex_lock(®ulator_list_mutex); - list_for_each_entry(rdev, ®ulator_list, list) { - if (!strcmp(rdev->desc->name, regulator)) - goto found; - } - mutex_unlock(®ulator_list_mutex); - return NULL; - -found: - mutex_unlock(®ulator_list_mutex); - if (rdev->supply) - return rdev->supply->desc->name; - else - return NULL; -} -EXPORT_SYMBOL_GPL(regulator_get_supply); - -/** - * regulator_set_machine_constraints - sets regulator constraints - * @regulator: regulator source - * - * Allows platform initialisation code to define and constrain - * regulator circuits e.g. valid voltage/current ranges, etc. NOTE: - * Constraints *must* be set by platform code in order for some - * regulator operations to proceed i.e. set_voltage, set_current_limit, - * set_mode. - */ -int regulator_set_machine_constraints(const char *regulator_name, - struct regulation_constraints *constraints) -{ - struct regulator_dev *rdev; - int ret = 0; - - if (regulator_name == NULL) - return -EINVAL; - - mutex_lock(®ulator_list_mutex); - - list_for_each_entry(rdev, ®ulator_list, list) { - if (!strcmp(regulator_name, rdev->desc->name)) - goto found; - } - ret = -ENODEV; - goto out; - -found: - mutex_lock(&rdev->mutex); - rdev->constraints = constraints; - - /* do we need to apply the constraint voltage */ - if (rdev->constraints->apply_uV && - rdev->constraints->min_uV == rdev->constraints->max_uV && - rdev->desc->ops->set_voltage) { - ret = rdev->desc->ops->set_voltage(rdev, - rdev->constraints->min_uV, rdev->constraints->max_uV); - if (ret < 0) { - printk(KERN_ERR "%s: failed to apply %duV" - " constraint\n", __func__, - rdev->constraints->min_uV); - rdev->constraints = NULL; - goto out; - } - } - - /* are we enabled at boot time by firmware / bootloader */ - if (rdev->constraints->boot_on) - rdev->use_count = 1; - - /* do we need to setup our suspend state */ - if (constraints->initial_state) - ret = suspend_prepare(rdev, constraints->initial_state); - - print_constraints(rdev); - mutex_unlock(&rdev->mutex); - -out: - mutex_unlock(®ulator_list_mutex); - return ret; -} -EXPORT_SYMBOL_GPL(regulator_set_machine_constraints); - - -/** - * regulator_set_device_supply: Bind a regulator to a symbolic supply - * @regulator: regulator source - * @dev: device the supply applies to - * @supply: symbolic name for supply - * - * Allows platform initialisation code to map physical regulator - * sources to symbolic names for supplies for use by devices. Devices - * should use these symbolic names to request regulators, avoiding the - * need to provide board-specific regulator names as platform data. - */ -int regulator_set_device_supply(const char *regulator, struct device *dev, - const char *supply) -{ - struct regulator_map *node; - - if (regulator == NULL || supply == NULL) - return -EINVAL; - - node = kmalloc(sizeof(struct regulator_map), GFP_KERNEL); - if (node == NULL) - return -ENOMEM; - - node->regulator = regulator; - node->dev = dev; - node->supply = supply; - - mutex_lock(®ulator_list_mutex); - list_add(&node->list, ®ulator_map_list); - mutex_unlock(®ulator_list_mutex); - return 0; -} -EXPORT_SYMBOL_GPL(regulator_set_device_supply); - /** * regulator_suspend_prepare: prepare regulators for system wide suspend * @state: system suspend state @@ -1893,6 +1876,18 @@ int rdev_get_id(struct regulator_dev *rdev) } EXPORT_SYMBOL_GPL(rdev_get_id); +struct device *rdev_get_dev(struct regulator_dev *rdev) +{ + return &rdev->dev; +} +EXPORT_SYMBOL_GPL(rdev_get_dev); + +void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data) +{ + return reg_init_data->driver_data; +} +EXPORT_SYMBOL_GPL(regulator_get_init_drvdata); + static int __init regulator_init(void) { printk(KERN_INFO "regulator: core version %s\n", REGULATOR_VERSION); -- cgit v1.2.3 From 46fabe1edd44a8893d88d7982f88d01ccf77f0bb Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 9 Sep 2008 16:21:18 +0100 Subject: regulator: check for init_data on registration Since it is now mandatory to supply constraints via init_data on device registration check for that when registering, saving us from oopsing later on. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/core.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/regulator') diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 84202eaace5..65e07b941a3 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1691,6 +1691,9 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, !regulator_desc->type == REGULATOR_CURRENT) return ERR_PTR(-EINVAL); + if (!init_data) + return ERR_PTR(-EINVAL); + rdev = kzalloc(sizeof(struct regulator_dev), GFP_KERNEL); if (rdev == NULL) return ERR_PTR(-ENOMEM); -- cgit v1.2.3 From e06f5b4fea243b152c79fe5d9552a852069de483 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 9 Sep 2008 16:21:19 +0100 Subject: regulator: Additional diagnostics for machine constraints Try to find a human readable name for the regulator we're failing on and print a specific diagnostic when we fail to set the suspend state. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/core.c | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-) (limited to 'drivers/regulator') diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 65e07b941a3..04408896705 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -669,6 +669,14 @@ static int set_machine_constraints(struct regulator_dev *rdev, struct regulation_constraints *constraints) { int ret = 0; + const char *name; + + if (constraints->name) + name = constraints->name; + else if (rdev->desc->name) + name = rdev->desc->name; + else + name = "regulator"; rdev->constraints = constraints; @@ -679,9 +687,9 @@ static int set_machine_constraints(struct regulator_dev *rdev, ret = rdev->desc->ops->set_voltage(rdev, rdev->constraints->min_uV, rdev->constraints->max_uV); if (ret < 0) { - printk(KERN_ERR "%s: failed to apply %duV" - " constraint\n", __func__, - rdev->constraints->min_uV); + printk(KERN_ERR "%s: failed to apply %duV constraint to %s\n", + __func__, + rdev->constraints->min_uV, name); rdev->constraints = NULL; goto out; } @@ -692,8 +700,15 @@ static int set_machine_constraints(struct regulator_dev *rdev, rdev->use_count = 1; /* do we need to setup our suspend state */ - if (constraints->initial_state) + if (constraints->initial_state) { ret = suspend_prepare(rdev, constraints->initial_state); + if (ret < 0) { + printk(KERN_ERR "%s: failed to set suspend state for %s\n", + __func__, name); + rdev->constraints = NULL; + goto out; + } + } print_constraints(rdev); out: -- cgit v1.2.3 From e5fda26c7ea9430d7d953364f900bafdce2be67b Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 9 Sep 2008 16:21:20 +0100 Subject: regulator: Enable regulators marked as always_on If the machine constraints mark a regulator as always_on but this was not done by the bootloader then enable the regulator when applying constraints. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/core.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) (limited to 'drivers/regulator') diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 04408896705..9a6757decd3 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -670,6 +670,7 @@ static int set_machine_constraints(struct regulator_dev *rdev, { int ret = 0; const char *name; + struct regulator_ops *ops = rdev->desc->ops; if (constraints->name) name = constraints->name; @@ -683,8 +684,8 @@ static int set_machine_constraints(struct regulator_dev *rdev, /* do we need to apply the constraint voltage */ if (rdev->constraints->apply_uV && rdev->constraints->min_uV == rdev->constraints->max_uV && - rdev->desc->ops->set_voltage) { - ret = rdev->desc->ops->set_voltage(rdev, + ops->set_voltage) { + ret = ops->set_voltage(rdev, rdev->constraints->min_uV, rdev->constraints->max_uV); if (ret < 0) { printk(KERN_ERR "%s: failed to apply %duV constraint to %s\n", @@ -710,6 +711,20 @@ static int set_machine_constraints(struct regulator_dev *rdev, } } + /* if always_on is set then turn the regulator on if it's not + * already on. */ + if (constraints->always_on && ops->enable && + ((ops->is_enabled && !ops->is_enabled(rdev)) || + (!ops->is_enabled && !constraints->boot_on))) { + ret = ops->enable(rdev); + if (ret < 0) { + printk(KERN_ERR "%s: failed to enable %s\n", + __func__, name); + rdev->constraints = NULL; + goto out; + } + } + print_constraints(rdev); out: return ret; -- cgit v1.2.3 From 42fad570b666256a3fd009e23e74cbb365a29ca8 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 11 Sep 2008 11:12:01 +0100 Subject: regulator: Add WM8400 regulator support The WM8400 provides two programmable DCDC step-down (buck) convertors and four low-dropout (LDO) regulators. This driver provides support for runtime managment of these in the standard regulator API. Support for configuration of the suspend and hibernate mode behaviour of the regulators is not yet included. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/Kconfig | 7 + drivers/regulator/Makefile | 1 + drivers/regulator/wm8400-regulator.c | 368 +++++++++++++++++++++++++++++++++++ 3 files changed, 376 insertions(+) create mode 100644 drivers/regulator/wm8400-regulator.c (limited to 'drivers/regulator') diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index a656128f1fd..99906872cb9 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -56,4 +56,11 @@ config REGULATOR_BQ24022 charging select between 100 mA and 500 mA charging current limit. +config REGULATOR_WM8400 + tristate "Wolfson Microelectroncis WM8400 AudioPlus PMIC" + depends on MFD_WM8400 + select REGULATOR + help + This driver provides support for the voltage regulators of the + WM8400 AudioPlus PMIC. endmenu diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index ac2c64efe65..3c6ac73af15 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -8,5 +8,6 @@ obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o +obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG diff --git a/drivers/regulator/wm8400-regulator.c b/drivers/regulator/wm8400-regulator.c new file mode 100644 index 00000000000..48b372e038a --- /dev/null +++ b/drivers/regulator/wm8400-regulator.c @@ -0,0 +1,368 @@ +/* + * Regulator support for WM8400 + * + * Copyright 2008 Wolfson Microelectronics PLC. + * + * Author: Mark Brown + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include + +static int wm8400_ldo_is_enabled(struct regulator_dev *dev) +{ + struct wm8400 *wm8400 = rdev_get_drvdata(dev); + u16 val; + + val = wm8400_reg_read(wm8400, WM8400_LDO1_CONTROL + rdev_get_id(dev)); + return (val & WM8400_LDO1_ENA) != 0; +} + +static int wm8400_ldo_enable(struct regulator_dev *dev) +{ + struct wm8400 *wm8400 = rdev_get_drvdata(dev); + + return wm8400_set_bits(wm8400, WM8400_LDO1_CONTROL + rdev_get_id(dev), + WM8400_LDO1_ENA, WM8400_LDO1_ENA); +} + +static int wm8400_ldo_disable(struct regulator_dev *dev) +{ + struct wm8400 *wm8400 = rdev_get_drvdata(dev); + + return wm8400_set_bits(wm8400, WM8400_LDO1_CONTROL + rdev_get_id(dev), + WM8400_LDO1_ENA, 0); +} + +static int wm8400_ldo_get_voltage(struct regulator_dev *dev) +{ + struct wm8400 *wm8400 = rdev_get_drvdata(dev); + u16 val; + + val = wm8400_reg_read(wm8400, WM8400_LDO1_CONTROL + rdev_get_id(dev)); + val &= WM8400_LDO1_VSEL_MASK; + + if (val < 15) + return 900000 + (val * 50000); + else + return 1600000 + ((val - 14) * 100000); +} + +static int wm8400_ldo_set_voltage(struct regulator_dev *dev, + int min_uV, int max_uV) +{ + struct wm8400 *wm8400 = rdev_get_drvdata(dev); + u16 val; + + if (min_uV < 900000 || min_uV > 3300000) + return -EINVAL; + + if (min_uV < 1700000) { + /* Steps of 50mV from 900mV; */ + val = (min_uV - 850001) / 50000; + + if ((val * 50000) + 900000 > max_uV) + return -EINVAL; + BUG_ON((val * 50000) + 900000 < min_uV); + } else { + /* Steps of 100mV from 1700mV */ + val = ((min_uV - 1600001) / 100000); + + if ((val * 100000) + 1700000 > max_uV) + return -EINVAL; + BUG_ON((val * 100000) + 1700000 < min_uV); + + val += 0xf; + } + + return wm8400_set_bits(wm8400, WM8400_LDO1_CONTROL + rdev_get_id(dev), + WM8400_LDO1_VSEL_MASK, val); +} + +static struct regulator_ops wm8400_ldo_ops = { + .is_enabled = wm8400_ldo_is_enabled, + .enable = wm8400_ldo_enable, + .disable = wm8400_ldo_disable, + .get_voltage = wm8400_ldo_get_voltage, + .set_voltage = wm8400_ldo_set_voltage, +}; + +static int wm8400_dcdc_is_enabled(struct regulator_dev *dev) +{ + struct wm8400 *wm8400 = rdev_get_drvdata(dev); + int offset = (rdev_get_id(dev) - WM8400_DCDC1) * 2; + u16 val; + + val = wm8400_reg_read(wm8400, WM8400_DCDC1_CONTROL_1 + offset); + return (val & WM8400_DC1_ENA) != 0; +} + +static int wm8400_dcdc_enable(struct regulator_dev *dev) +{ + struct wm8400 *wm8400 = rdev_get_drvdata(dev); + int offset = (rdev_get_id(dev) - WM8400_DCDC1) * 2; + + return wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_1 + offset, + WM8400_DC1_ENA, WM8400_DC1_ENA); +} + +static int wm8400_dcdc_disable(struct regulator_dev *dev) +{ + struct wm8400 *wm8400 = rdev_get_drvdata(dev); + int offset = (rdev_get_id(dev) - WM8400_DCDC1) * 2; + + return wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_1 + offset, + WM8400_DC1_ENA, 0); +} + +static int wm8400_dcdc_get_voltage(struct regulator_dev *dev) +{ + struct wm8400 *wm8400 = rdev_get_drvdata(dev); + u16 val; + int offset = (rdev_get_id(dev) - WM8400_DCDC1) * 2; + + val = wm8400_reg_read(wm8400, WM8400_DCDC1_CONTROL_1 + offset); + val &= WM8400_DC1_VSEL_MASK; + + return 850000 + (25000 * val); +} + +static int wm8400_dcdc_set_voltage(struct regulator_dev *dev, + int min_uV, int max_uV) +{ + struct wm8400 *wm8400 = rdev_get_drvdata(dev); + u16 val; + int offset = (rdev_get_id(dev) - WM8400_DCDC1) * 2; + + if (min_uV < 850000) + return -EINVAL; + + val = (min_uV - 825001) / 25000; + + if (850000 + (25000 * val) > max_uV) + return -EINVAL; + BUG_ON(850000 + (25000 * val) < min_uV); + + return wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_1 + offset, + WM8400_DC1_VSEL_MASK, val); +} + +static unsigned int wm8400_dcdc_get_mode(struct regulator_dev *dev) +{ + struct wm8400 *wm8400 = rdev_get_drvdata(dev); + int offset = (rdev_get_id(dev) - WM8400_DCDC1) * 2; + u16 data[2]; + int ret; + + ret = wm8400_block_read(wm8400, WM8400_DCDC1_CONTROL_1 + offset, 2, + data); + if (ret != 0) + return 0; + + /* Datasheet: hibernate */ + if (data[0] & WM8400_DC1_SLEEP) + return REGULATOR_MODE_STANDBY; + + /* Datasheet: standby */ + if (!(data[0] & WM8400_DC1_ACTIVE)) + return REGULATOR_MODE_IDLE; + + /* Datasheet: active with or without force PWM */ + if (data[1] & WM8400_DC1_FRC_PWM) + return REGULATOR_MODE_FAST; + else + return REGULATOR_MODE_NORMAL; +} + +static int wm8400_dcdc_set_mode(struct regulator_dev *dev, unsigned int mode) +{ + struct wm8400 *wm8400 = rdev_get_drvdata(dev); + int offset = (rdev_get_id(dev) - WM8400_DCDC1) * 2; + int ret; + + switch (mode) { + case REGULATOR_MODE_FAST: + /* Datasheet: active with force PWM */ + ret = wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_2 + offset, + WM8400_DC1_FRC_PWM, WM8400_DC1_FRC_PWM); + if (ret != 0) + return ret; + + return wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_1 + offset, + WM8400_DC1_ACTIVE | WM8400_DC1_SLEEP, + WM8400_DC1_ACTIVE); + + case REGULATOR_MODE_NORMAL: + /* Datasheet: active */ + ret = wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_2 + offset, + WM8400_DC1_FRC_PWM, 0); + if (ret != 0) + return ret; + + return wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_1 + offset, + WM8400_DC1_ACTIVE | WM8400_DC1_SLEEP, + WM8400_DC1_ACTIVE); + + case REGULATOR_MODE_IDLE: + /* Datasheet: standby */ + ret = wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_1 + offset, + WM8400_DC1_ACTIVE, 0); + if (ret != 0) + return ret; + return wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_1 + offset, + WM8400_DC1_SLEEP, 0); + + default: + return -EINVAL; + } +} + +static unsigned int wm8400_dcdc_get_optimum_mode(struct regulator_dev *dev, + int input_uV, int output_uV, + int load_uA) +{ + return REGULATOR_MODE_NORMAL; +} + +static struct regulator_ops wm8400_dcdc_ops = { + .is_enabled = wm8400_dcdc_is_enabled, + .enable = wm8400_dcdc_enable, + .disable = wm8400_dcdc_disable, + .get_voltage = wm8400_dcdc_get_voltage, + .set_voltage = wm8400_dcdc_set_voltage, + .get_mode = wm8400_dcdc_get_mode, + .set_mode = wm8400_dcdc_set_mode, + .get_optimum_mode = wm8400_dcdc_get_optimum_mode, +}; + +static struct regulator_desc regulators[] = { + { + .name = "LDO1", + .id = WM8400_LDO1, + .ops = &wm8400_ldo_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "LDO2", + .id = WM8400_LDO2, + .ops = &wm8400_ldo_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "LDO3", + .id = WM8400_LDO3, + .ops = &wm8400_ldo_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "LDO4", + .id = WM8400_LDO4, + .ops = &wm8400_ldo_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "DCDC1", + .id = WM8400_DCDC1, + .ops = &wm8400_dcdc_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "DCDC2", + .id = WM8400_DCDC2, + .ops = &wm8400_dcdc_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, +}; + +static int __init wm8400_regulator_probe(struct platform_device *pdev) +{ + struct regulator_dev *rdev; + + rdev = regulator_register(®ulators[pdev->id], &pdev->dev, + pdev->dev.driver_data); + + if (IS_ERR(rdev)) + return PTR_ERR(rdev); + + return 0; +} + +static int __devexit wm8400_regulator_remove(struct platform_device *pdev) +{ + struct regulator_dev *rdev = platform_get_drvdata(pdev); + + regulator_unregister(rdev); + + return 0; +} + +static struct platform_driver wm8400_regulator_driver = { + .driver = { + .name = "wm8400-regulator", + }, + .probe = wm8400_regulator_probe, + .remove = __devexit_p(wm8400_regulator_remove), +}; + +/** + * wm8400_register_regulator - enable software control of a WM8400 regulator + * + * This function enables software control of a WM8400 regulator via + * the regulator API. It is intended to be called from the + * platform_init() callback of the WM8400 MFD driver. + * + * @param dev The WM8400 device to operate on. + * @param reg The regulator to control. + * @param initdata Regulator initdata for the regulator. + */ +int wm8400_register_regulator(struct device *dev, int reg, + struct regulator_init_data *initdata) +{ + struct wm8400 *wm8400 = dev->driver_data; + + if (wm8400->regulators[reg].name) + return -EBUSY; + + initdata->driver_data = wm8400; + + wm8400->regulators[reg].name = "wm8400-regulator"; + wm8400->regulators[reg].id = reg; + wm8400->regulators[reg].dev.parent = dev; + wm8400->regulators[reg].dev.driver_data = wm8400; + wm8400->regulators[reg].dev.platform_data = initdata; + + return platform_device_register(&wm8400->regulators[reg]); +} +EXPORT_SYMBOL_GPL(wm8400_register_regulator); + +static int __init wm8400_regulator_init(void) +{ + return platform_driver_register(&wm8400_regulator_driver); +} +module_init(wm8400_regulator_init); + +static void __exit wm8400_regulator_exit(void) +{ + platform_driver_unregister(&wm8400_regulator_driver); +} +module_exit(wm8400_regulator_exit); + +MODULE_AUTHOR("Mark Brown "); +MODULE_DESCRIPTION("WM8400 regulator driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm8400-regulator"); -- cgit v1.2.3 From bc558a60b58f638ee0188affb627d4894a97b1c7 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 10 Oct 2008 15:33:20 +0100 Subject: regulator: Export regulator name via sysfs Provide a new file 'name' in the regulator sysfs class with a human readable name for the regulator for use in applications. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/core.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'drivers/regulator') diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 9a6757decd3..02a774424e8 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -241,6 +241,22 @@ static ssize_t regulator_uA_show(struct device *dev, return sprintf(buf, "%d\n", _regulator_get_current_limit(rdev)); } +static ssize_t regulator_name_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = dev_get_drvdata(dev); + const char *name; + + if (rdev->constraints->name) + name = rdev->constraints->name; + else if (rdev->desc->name) + name = rdev->desc->name; + else + name = ""; + + return sprintf(buf, "%s\n", name); +} + static ssize_t regulator_opmode_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -473,7 +489,9 @@ static ssize_t regulator_suspend_standby_state_show(struct device *dev, else return sprintf(buf, "disabled\n"); } + static struct device_attribute regulator_dev_attrs[] = { + __ATTR(name, 0444, regulator_name_show, NULL), __ATTR(microvolts, 0444, regulator_uV_show, NULL), __ATTR(microamps, 0444, regulator_uA_show, NULL), __ATTR(opmode, 0444, regulator_opmode_show, NULL), -- cgit v1.2.3 From da09155ac8d3f04c299b3d82a6ab0df8d03da632 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 10 Oct 2008 15:58:15 +0100 Subject: regulator: Add WM8350 regulator support The WM8350 features six DCDC convertors (four buck and two boost), four LDO voltage regulators and two constant current sinks. This driver adds support for these through the regulator API. This driver was written by Liam Girdwood with updates for submission from Mark Brown. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/Kconfig | 9 + drivers/regulator/Makefile | 1 + drivers/regulator/wm8350-regulator.c | 1431 ++++++++++++++++++++++++++++++++++ 3 files changed, 1441 insertions(+) create mode 100644 drivers/regulator/wm8350-regulator.c (limited to 'drivers/regulator') diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 99906872cb9..a620023169b 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -56,6 +56,14 @@ config REGULATOR_BQ24022 charging select between 100 mA and 500 mA charging current limit. +config REGULATOR_WM8350 + tristate "Wolfson Microelectroncis WM8350 AudioPlus PMIC" + depends on MFD_WM8350 + select REGULATOR + help + This driver provides support for the voltage and current regulators + of the WM8350 AudioPlus PMIC. + config REGULATOR_WM8400 tristate "Wolfson Microelectroncis WM8400 AudioPlus PMIC" depends on MFD_WM8400 @@ -63,4 +71,5 @@ config REGULATOR_WM8400 help This driver provides support for the voltage regulators of the WM8400 AudioPlus PMIC. + endmenu diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 3c6ac73af15..0de39fe2eae 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o +obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c new file mode 100644 index 00000000000..1f44b17e23b --- /dev/null +++ b/drivers/regulator/wm8350-regulator.c @@ -0,0 +1,1431 @@ +/* + * wm8350.c -- Voltage and current regulation for the Wolfson WM8350 PMIC + * + * Copyright 2007, 2008 Wolfson Microelectronics PLC. + * + * Author: Liam Girdwood + * linux@wolfsonmicro.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Microamps */ +static const int isink_cur[] = { + 4, + 5, + 6, + 7, + 8, + 10, + 11, + 14, + 16, + 19, + 23, + 27, + 32, + 39, + 46, + 54, + 65, + 77, + 92, + 109, + 130, + 154, + 183, + 218, + 259, + 308, + 367, + 436, + 518, + 616, + 733, + 872, + 1037, + 1233, + 1466, + 1744, + 2073, + 2466, + 2933, + 3487, + 4147, + 4932, + 5865, + 6975, + 8294, + 9864, + 11730, + 13949, + 16589, + 19728, + 23460, + 27899, + 33178, + 39455, + 46920, + 55798, + 66355, + 78910, + 93840, + 111596, + 132710, + 157820, + 187681, + 223191 +}; + +static int get_isink_val(int min_uA, int max_uA, u16 *setting) +{ + int i; + + for (i = ARRAY_SIZE(isink_cur) - 1; i >= 0; i--) { + if (min_uA <= isink_cur[i] && max_uA >= isink_cur[i]) { + *setting = i; + return 0; + } + } + return -EINVAL; +} + +static inline int wm8350_ldo_val_to_mvolts(unsigned int val) +{ + if (val < 16) + return (val * 50) + 900; + else + return ((val - 16) * 100) + 1800; + +} + +static inline unsigned int wm8350_ldo_mvolts_to_val(int mV) +{ + if (mV < 1800) + return (mV - 900) / 50; + else + return ((mV - 1800) / 100) + 16; +} + +static inline int wm8350_dcdc_val_to_mvolts(unsigned int val) +{ + return (val * 25) + 850; +} + +static inline unsigned int wm8350_dcdc_mvolts_to_val(int mV) +{ + return (mV - 850) / 25; +} + +static int wm8350_isink_set_current(struct regulator_dev *rdev, int min_uA, + int max_uA) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int isink = rdev_get_id(rdev); + u16 val, setting; + int ret; + + ret = get_isink_val(min_uA, max_uA, &setting); + if (ret != 0) + return ret; + + switch (isink) { + case WM8350_ISINK_A: + val = wm8350_reg_read(wm8350, WM8350_CURRENT_SINK_DRIVER_A) & + ~WM8350_CS1_ISEL_MASK; + wm8350_reg_write(wm8350, WM8350_CURRENT_SINK_DRIVER_A, + val | setting); + break; + case WM8350_ISINK_B: + val = wm8350_reg_read(wm8350, WM8350_CURRENT_SINK_DRIVER_B) & + ~WM8350_CS1_ISEL_MASK; + wm8350_reg_write(wm8350, WM8350_CURRENT_SINK_DRIVER_B, + val | setting); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int wm8350_isink_get_current(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int isink = rdev_get_id(rdev); + u16 val; + + switch (isink) { + case WM8350_ISINK_A: + val = wm8350_reg_read(wm8350, WM8350_CURRENT_SINK_DRIVER_A) & + WM8350_CS1_ISEL_MASK; + break; + case WM8350_ISINK_B: + val = wm8350_reg_read(wm8350, WM8350_CURRENT_SINK_DRIVER_B) & + WM8350_CS1_ISEL_MASK; + break; + default: + return 0; + } + + return (isink_cur[val] + 50) / 100; +} + +/* turn on ISINK followed by DCDC */ +static int wm8350_isink_enable(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int isink = rdev_get_id(rdev); + + switch (isink) { + case WM8350_ISINK_A: + switch (wm8350->pmic.isink_A_dcdc) { + case WM8350_DCDC_2: + case WM8350_DCDC_5: + wm8350_set_bits(wm8350, WM8350_POWER_MGMT_7, + WM8350_CS1_ENA); + wm8350_set_bits(wm8350, WM8350_CSA_FLASH_CONTROL, + WM8350_CS1_DRIVE); + wm8350_set_bits(wm8350, WM8350_DCDC_LDO_REQUESTED, + 1 << (wm8350->pmic.isink_A_dcdc - + WM8350_DCDC_1)); + break; + default: + return -EINVAL; + } + break; + case WM8350_ISINK_B: + switch (wm8350->pmic.isink_B_dcdc) { + case WM8350_DCDC_2: + case WM8350_DCDC_5: + wm8350_set_bits(wm8350, WM8350_POWER_MGMT_7, + WM8350_CS2_ENA); + wm8350_set_bits(wm8350, WM8350_CSB_FLASH_CONTROL, + WM8350_CS2_DRIVE); + wm8350_set_bits(wm8350, WM8350_DCDC_LDO_REQUESTED, + 1 << (wm8350->pmic.isink_B_dcdc - + WM8350_DCDC_1)); + break; + default: + return -EINVAL; + } + break; + default: + return -EINVAL; + } + return 0; +} + +static int wm8350_isink_disable(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int isink = rdev_get_id(rdev); + + switch (isink) { + case WM8350_ISINK_A: + switch (wm8350->pmic.isink_A_dcdc) { + case WM8350_DCDC_2: + case WM8350_DCDC_5: + wm8350_clear_bits(wm8350, WM8350_DCDC_LDO_REQUESTED, + 1 << (wm8350->pmic.isink_A_dcdc - + WM8350_DCDC_1)); + wm8350_clear_bits(wm8350, WM8350_POWER_MGMT_7, + WM8350_CS1_ENA); + break; + default: + return -EINVAL; + } + break; + case WM8350_ISINK_B: + switch (wm8350->pmic.isink_B_dcdc) { + case WM8350_DCDC_2: + case WM8350_DCDC_5: + wm8350_clear_bits(wm8350, WM8350_DCDC_LDO_REQUESTED, + 1 << (wm8350->pmic.isink_B_dcdc - + WM8350_DCDC_1)); + wm8350_clear_bits(wm8350, WM8350_POWER_MGMT_7, + WM8350_CS2_ENA); + break; + default: + return -EINVAL; + } + break; + default: + return -EINVAL; + } + return 0; +} + +static int wm8350_isink_is_enabled(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int isink = rdev_get_id(rdev); + + switch (isink) { + case WM8350_ISINK_A: + return wm8350_reg_read(wm8350, WM8350_CURRENT_SINK_DRIVER_A) & + 0x8000; + case WM8350_ISINK_B: + return wm8350_reg_read(wm8350, WM8350_CURRENT_SINK_DRIVER_B) & + 0x8000; + } + return -EINVAL; +} + +int wm8350_isink_set_flash(struct wm8350 *wm8350, int isink, u16 mode, + u16 trigger, u16 duration, u16 on_ramp, u16 off_ramp, + u16 drive) +{ + switch (isink) { + case WM8350_ISINK_A: + wm8350_reg_write(wm8350, WM8350_CSA_FLASH_CONTROL, + (mode ? WM8350_CS1_FLASH_MODE : 0) | + (trigger ? WM8350_CS1_TRIGSRC : 0) | + duration | on_ramp | off_ramp | drive); + break; + case WM8350_ISINK_B: + wm8350_reg_write(wm8350, WM8350_CSB_FLASH_CONTROL, + (mode ? WM8350_CS2_FLASH_MODE : 0) | + (trigger ? WM8350_CS2_TRIGSRC : 0) | + duration | on_ramp | off_ramp | drive); + break; + default: + return -EINVAL; + } + return 0; +} +EXPORT_SYMBOL_GPL(wm8350_isink_set_flash); + +static int wm8350_dcdc_set_voltage(struct regulator_dev *rdev, int min_uV, + int max_uV) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int volt_reg, dcdc = rdev_get_id(rdev), mV, + min_mV = min_uV / 1000, max_mV = max_uV / 1000; + u16 val; + + if (min_mV < 850 || min_mV > 4025) + return -EINVAL; + if (max_mV < 850 || max_mV > 4025) + return -EINVAL; + + /* step size is 25mV */ + mV = (min_mV - 826) / 25; + if (wm8350_dcdc_val_to_mvolts(mV) > max_mV) + return -EINVAL; + BUG_ON(wm8350_dcdc_val_to_mvolts(mV) < min_mV); + + switch (dcdc) { + case WM8350_DCDC_1: + volt_reg = WM8350_DCDC1_CONTROL; + break; + case WM8350_DCDC_3: + volt_reg = WM8350_DCDC3_CONTROL; + break; + case WM8350_DCDC_4: + volt_reg = WM8350_DCDC4_CONTROL; + break; + case WM8350_DCDC_6: + volt_reg = WM8350_DCDC6_CONTROL; + break; + case WM8350_DCDC_2: + case WM8350_DCDC_5: + default: + return -EINVAL; + } + + /* all DCDCs have same mV bits */ + val = wm8350_reg_read(wm8350, volt_reg) & ~WM8350_DC1_VSEL_MASK; + wm8350_reg_write(wm8350, volt_reg, val | mV); + return 0; +} + +static int wm8350_dcdc_get_voltage(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int volt_reg, dcdc = rdev_get_id(rdev); + u16 val; + + switch (dcdc) { + case WM8350_DCDC_1: + volt_reg = WM8350_DCDC1_CONTROL; + break; + case WM8350_DCDC_3: + volt_reg = WM8350_DCDC3_CONTROL; + break; + case WM8350_DCDC_4: + volt_reg = WM8350_DCDC4_CONTROL; + break; + case WM8350_DCDC_6: + volt_reg = WM8350_DCDC6_CONTROL; + break; + case WM8350_DCDC_2: + case WM8350_DCDC_5: + default: + return -EINVAL; + } + + /* all DCDCs have same mV bits */ + val = wm8350_reg_read(wm8350, volt_reg) & WM8350_DC1_VSEL_MASK; + return wm8350_dcdc_val_to_mvolts(val) * 1000; +} + +static int wm8350_dcdc_set_suspend_voltage(struct regulator_dev *rdev, int uV) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int volt_reg, mV = uV / 1000, dcdc = rdev_get_id(rdev); + u16 val; + + dev_dbg(wm8350->dev, "%s %d mV %d\n", __func__, dcdc, mV); + + if (mV && (mV < 850 || mV > 4025)) { + dev_err(wm8350->dev, + "DCDC%d suspend voltage %d mV out of range\n", + dcdc, mV); + return -EINVAL; + } + if (mV == 0) + mV = 850; + + switch (dcdc) { + case WM8350_DCDC_1: + volt_reg = WM8350_DCDC1_LOW_POWER; + break; + case WM8350_DCDC_3: + volt_reg = WM8350_DCDC3_LOW_POWER; + break; + case WM8350_DCDC_4: + volt_reg = WM8350_DCDC4_LOW_POWER; + break; + case WM8350_DCDC_6: + volt_reg = WM8350_DCDC6_LOW_POWER; + break; + case WM8350_DCDC_2: + case WM8350_DCDC_5: + default: + return -EINVAL; + } + + /* all DCDCs have same mV bits */ + val = wm8350_reg_read(wm8350, volt_reg) & ~WM8350_DC1_VSEL_MASK; + wm8350_reg_write(wm8350, volt_reg, + val | wm8350_dcdc_mvolts_to_val(mV)); + return 0; +} + +static int wm8350_dcdc_set_suspend_enable(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int dcdc = rdev_get_id(rdev); + u16 val; + + switch (dcdc) { + case WM8350_DCDC_1: + val = wm8350_reg_read(wm8350, WM8350_DCDC1_LOW_POWER) + & ~WM8350_DCDC_HIB_MODE_MASK; + wm8350_reg_write(wm8350, WM8350_DCDC1_LOW_POWER, + wm8350->pmic.dcdc1_hib_mode); + break; + case WM8350_DCDC_3: + val = wm8350_reg_read(wm8350, WM8350_DCDC3_LOW_POWER) + & ~WM8350_DCDC_HIB_MODE_MASK; + wm8350_reg_write(wm8350, WM8350_DCDC3_LOW_POWER, + wm8350->pmic.dcdc3_hib_mode); + break; + case WM8350_DCDC_4: + val = wm8350_reg_read(wm8350, WM8350_DCDC4_LOW_POWER) + & ~WM8350_DCDC_HIB_MODE_MASK; + wm8350_reg_write(wm8350, WM8350_DCDC4_LOW_POWER, + wm8350->pmic.dcdc4_hib_mode); + break; + case WM8350_DCDC_6: + val = wm8350_reg_read(wm8350, WM8350_DCDC6_LOW_POWER) + & ~WM8350_DCDC_HIB_MODE_MASK; + wm8350_reg_write(wm8350, WM8350_DCDC6_LOW_POWER, + wm8350->pmic.dcdc6_hib_mode); + break; + case WM8350_DCDC_2: + case WM8350_DCDC_5: + default: + return -EINVAL; + } + + return 0; +} + +static int wm8350_dcdc_set_suspend_disable(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int dcdc = rdev_get_id(rdev); + u16 val; + + switch (dcdc) { + case WM8350_DCDC_1: + val = wm8350_reg_read(wm8350, WM8350_DCDC1_LOW_POWER); + wm8350->pmic.dcdc1_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK; + wm8350_reg_write(wm8350, WM8350_DCDC1_LOW_POWER, + WM8350_DCDC_HIB_MODE_DIS); + break; + case WM8350_DCDC_3: + val = wm8350_reg_read(wm8350, WM8350_DCDC3_LOW_POWER); + wm8350->pmic.dcdc3_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK; + wm8350_reg_write(wm8350, WM8350_DCDC3_LOW_POWER, + WM8350_DCDC_HIB_MODE_DIS); + break; + case WM8350_DCDC_4: + val = wm8350_reg_read(wm8350, WM8350_DCDC4_LOW_POWER); + wm8350->pmic.dcdc4_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK; + wm8350_reg_write(wm8350, WM8350_DCDC4_LOW_POWER, + WM8350_DCDC_HIB_MODE_DIS); + break; + case WM8350_DCDC_6: + val = wm8350_reg_read(wm8350, WM8350_DCDC6_LOW_POWER); + wm8350->pmic.dcdc6_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK; + wm8350_reg_write(wm8350, WM8350_DCDC6_LOW_POWER, + WM8350_DCDC_HIB_MODE_DIS); + break; + case WM8350_DCDC_2: + case WM8350_DCDC_5: + default: + return -EINVAL; + } + + return 0; +} + +static int wm8350_dcdc25_set_suspend_enable(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int dcdc = rdev_get_id(rdev); + u16 val; + + switch (dcdc) { + case WM8350_DCDC_2: + val = wm8350_reg_read(wm8350, WM8350_DCDC2_CONTROL) + & ~WM8350_DC2_HIB_MODE_MASK; + wm8350_reg_write(wm8350, WM8350_DCDC2_CONTROL, val | + WM8350_DC2_HIB_MODE_ACTIVE); + break; + case WM8350_DCDC_5: + val = wm8350_reg_read(wm8350, WM8350_DCDC5_CONTROL) + & ~WM8350_DC2_HIB_MODE_MASK; + wm8350_reg_write(wm8350, WM8350_DCDC5_CONTROL, val | + WM8350_DC5_HIB_MODE_ACTIVE); + break; + default: + return -EINVAL; + } + return 0; +} + +static int wm8350_dcdc25_set_suspend_disable(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int dcdc = rdev_get_id(rdev); + u16 val; + + switch (dcdc) { + case WM8350_DCDC_2: + val = wm8350_reg_read(wm8350, WM8350_DCDC2_CONTROL) + & ~WM8350_DC2_HIB_MODE_MASK; + wm8350_reg_write(wm8350, WM8350_DCDC2_CONTROL, val | + WM8350_DC2_HIB_MODE_DISABLE); + break; + case WM8350_DCDC_5: + val = wm8350_reg_read(wm8350, WM8350_DCDC5_CONTROL) + & ~WM8350_DC2_HIB_MODE_MASK; + wm8350_reg_write(wm8350, WM8350_DCDC5_CONTROL, val | + WM8350_DC2_HIB_MODE_DISABLE); + break; + default: + return -EINVAL; + } + return 0; +} + +static int wm8350_dcdc_set_suspend_mode(struct regulator_dev *rdev, + unsigned int mode) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int dcdc = rdev_get_id(rdev); + u16 *hib_mode; + + switch (dcdc) { + case WM8350_DCDC_1: + hib_mode = &wm8350->pmic.dcdc1_hib_mode; + break; + case WM8350_DCDC_3: + hib_mode = &wm8350->pmic.dcdc3_hib_mode; + break; + case WM8350_DCDC_4: + hib_mode = &wm8350->pmic.dcdc4_hib_mode; + break; + case WM8350_DCDC_6: + hib_mode = &wm8350->pmic.dcdc6_hib_mode; + break; + case WM8350_DCDC_2: + case WM8350_DCDC_5: + default: + return -EINVAL; + } + + switch (mode) { + case REGULATOR_MODE_NORMAL: + *hib_mode = WM8350_DCDC_HIB_MODE_IMAGE; + break; + case REGULATOR_MODE_IDLE: + *hib_mode = WM8350_DCDC_HIB_MODE_STANDBY; + break; + case REGULATOR_MODE_STANDBY: + *hib_mode = WM8350_DCDC_HIB_MODE_LDO_IM; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int wm8350_ldo_set_suspend_voltage(struct regulator_dev *rdev, int uV) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int volt_reg, mV = uV / 1000, ldo = rdev_get_id(rdev); + u16 val; + + dev_dbg(wm8350->dev, "%s %d mV %d\n", __func__, ldo, mV); + + if (mV < 900 || mV > 3300) { + dev_err(wm8350->dev, "LDO%d voltage %d mV out of range\n", + ldo, mV); + return -EINVAL; + } + + switch (ldo) { + case WM8350_LDO_1: + volt_reg = WM8350_LDO1_LOW_POWER; + break; + case WM8350_LDO_2: + volt_reg = WM8350_LDO2_LOW_POWER; + break; + case WM8350_LDO_3: + volt_reg = WM8350_LDO3_LOW_POWER; + break; + case WM8350_LDO_4: + volt_reg = WM8350_LDO4_LOW_POWER; + break; + default: + return -EINVAL; + } + + /* all LDOs have same mV bits */ + val = wm8350_reg_read(wm8350, volt_reg) & ~WM8350_LDO1_VSEL_MASK; + wm8350_reg_write(wm8350, volt_reg, + val | wm8350_ldo_mvolts_to_val(mV)); + return 0; +} + +static int wm8350_ldo_set_suspend_enable(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int volt_reg, ldo = rdev_get_id(rdev); + u16 val; + + switch (ldo) { + case WM8350_LDO_1: + volt_reg = WM8350_LDO1_LOW_POWER; + break; + case WM8350_LDO_2: + volt_reg = WM8350_LDO2_LOW_POWER; + break; + case WM8350_LDO_3: + volt_reg = WM8350_LDO3_LOW_POWER; + break; + case WM8350_LDO_4: + volt_reg = WM8350_LDO4_LOW_POWER; + break; + default: + return -EINVAL; + } + + /* all LDOs have same mV bits */ + val = wm8350_reg_read(wm8350, volt_reg) & ~WM8350_LDO1_HIB_MODE_MASK; + wm8350_reg_write(wm8350, volt_reg, val); + return 0; +} + +static int wm8350_ldo_set_suspend_disable(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int volt_reg, ldo = rdev_get_id(rdev); + u16 val; + + switch (ldo) { + case WM8350_LDO_1: + volt_reg = WM8350_LDO1_LOW_POWER; + break; + case WM8350_LDO_2: + volt_reg = WM8350_LDO2_LOW_POWER; + break; + case WM8350_LDO_3: + volt_reg = WM8350_LDO3_LOW_POWER; + break; + case WM8350_LDO_4: + volt_reg = WM8350_LDO4_LOW_POWER; + break; + default: + return -EINVAL; + } + + /* all LDOs have same mV bits */ + val = wm8350_reg_read(wm8350, volt_reg) & ~WM8350_LDO1_HIB_MODE_MASK; + wm8350_reg_write(wm8350, volt_reg, WM8350_LDO1_HIB_MODE_DIS); + return 0; +} + +static int wm8350_ldo_set_voltage(struct regulator_dev *rdev, int min_uV, + int max_uV) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int volt_reg, ldo = rdev_get_id(rdev), mV, min_mV = min_uV / 1000, + max_mV = max_uV / 1000; + u16 val; + + if (min_mV < 900 || min_mV > 3300) + return -EINVAL; + if (max_mV < 900 || max_mV > 3300) + return -EINVAL; + + if (min_mV < 1800) { + /* step size is 50mV < 1800mV */ + mV = (min_mV - 851) / 50; + if (wm8350_ldo_val_to_mvolts(mV) > max_mV) + return -EINVAL; + BUG_ON(wm8350_ldo_val_to_mvolts(mV) < min_mV); + } else { + /* step size is 100mV > 1800mV */ + mV = ((min_mV - 1701) / 100) + 16; + if (wm8350_ldo_val_to_mvolts(mV) > max_mV) + return -EINVAL; + BUG_ON(wm8350_ldo_val_to_mvolts(mV) < min_mV); + } + + switch (ldo) { + case WM8350_LDO_1: + volt_reg = WM8350_LDO1_CONTROL; + break; + case WM8350_LDO_2: + volt_reg = WM8350_LDO2_CONTROL; + break; + case WM8350_LDO_3: + volt_reg = WM8350_LDO3_CONTROL; + break; + case WM8350_LDO_4: + volt_reg = WM8350_LDO4_CONTROL; + break; + default: + return -EINVAL; + } + + /* all LDOs have same mV bits */ + val = wm8350_reg_read(wm8350, volt_reg) & ~WM8350_LDO1_VSEL_MASK; + wm8350_reg_write(wm8350, volt_reg, val | mV); + return 0; +} + +static int wm8350_ldo_get_voltage(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int volt_reg, ldo = rdev_get_id(rdev); + u16 val; + + switch (ldo) { + case WM8350_LDO_1: + volt_reg = WM8350_LDO1_CONTROL; + break; + case WM8350_LDO_2: + volt_reg = WM8350_LDO2_CONTROL; + break; + case WM8350_LDO_3: + volt_reg = WM8350_LDO3_CONTROL; + break; + case WM8350_LDO_4: + volt_reg = WM8350_LDO4_CONTROL; + break; + default: + return -EINVAL; + } + + /* all LDOs have same mV bits */ + val = wm8350_reg_read(wm8350, volt_reg) & WM8350_LDO1_VSEL_MASK; + return wm8350_ldo_val_to_mvolts(val) * 1000; +} + +int wm8350_dcdc_set_slot(struct wm8350 *wm8350, int dcdc, u16 start, + u16 stop, u16 fault) +{ + int slot_reg; + u16 val; + + dev_dbg(wm8350->dev, "%s %d start %d stop %d\n", + __func__, dcdc, start, stop); + + /* slot valid ? */ + if (start > 15 || stop > 15) + return -EINVAL; + + switch (dcdc) { + case WM8350_DCDC_1: + slot_reg = WM8350_DCDC1_TIMEOUTS; + break; + case WM8350_DCDC_2: + slot_reg = WM8350_DCDC2_TIMEOUTS; + break; + case WM8350_DCDC_3: + slot_reg = WM8350_DCDC3_TIMEOUTS; + break; + case WM8350_DCDC_4: + slot_reg = WM8350_DCDC4_TIMEOUTS; + break; + case WM8350_DCDC_5: + slot_reg = WM8350_DCDC5_TIMEOUTS; + break; + case WM8350_DCDC_6: + slot_reg = WM8350_DCDC6_TIMEOUTS; + break; + default: + return -EINVAL; + } + + val = wm8350_reg_read(wm8350, slot_reg) & + ~(WM8350_DC1_ENSLOT_MASK | WM8350_DC1_SDSLOT_MASK | + WM8350_DC1_ERRACT_MASK); + wm8350_reg_write(wm8350, slot_reg, + val | (start << WM8350_DC1_ENSLOT_SHIFT) | + (stop << WM8350_DC1_SDSLOT_SHIFT) | + (fault << WM8350_DC1_ERRACT_SHIFT)); + + return 0; +} +EXPORT_SYMBOL_GPL(wm8350_dcdc_set_slot); + +int wm8350_ldo_set_slot(struct wm8350 *wm8350, int ldo, u16 start, u16 stop) +{ + int slot_reg; + u16 val; + + dev_dbg(wm8350->dev, "%s %d start %d stop %d\n", + __func__, ldo, start, stop); + + /* slot valid ? */ + if (start > 15 || stop > 15) + return -EINVAL; + + switch (ldo) { + case WM8350_LDO_1: + slot_reg = WM8350_LDO1_TIMEOUTS; + break; + case WM8350_LDO_2: + slot_reg = WM8350_LDO2_TIMEOUTS; + break; + case WM8350_LDO_3: + slot_reg = WM8350_LDO3_TIMEOUTS; + break; + case WM8350_LDO_4: + slot_reg = WM8350_LDO4_TIMEOUTS; + break; + default: + return -EINVAL; + } + + val = wm8350_reg_read(wm8350, slot_reg) & ~WM8350_LDO1_SDSLOT_MASK; + wm8350_reg_write(wm8350, slot_reg, val | ((start << 10) | (stop << 6))); + return 0; +} +EXPORT_SYMBOL_GPL(wm8350_ldo_set_slot); + +int wm8350_dcdc25_set_mode(struct wm8350 *wm8350, int dcdc, u16 mode, + u16 ilim, u16 ramp, u16 feedback) +{ + u16 val; + + dev_dbg(wm8350->dev, "%s %d mode: %s %s\n", __func__, dcdc, + mode ? "normal" : "boost", ilim ? "low" : "normal"); + + switch (dcdc) { + case WM8350_DCDC_2: + val = wm8350_reg_read(wm8350, WM8350_DCDC2_CONTROL) + & ~(WM8350_DC2_MODE_MASK | WM8350_DC2_ILIM_MASK | + WM8350_DC2_RMP_MASK | WM8350_DC2_FBSRC_MASK); + wm8350_reg_write(wm8350, WM8350_DCDC2_CONTROL, val | + (mode << WM8350_DC2_MODE_SHIFT) | + (ilim << WM8350_DC2_ILIM_SHIFT) | + (ramp << WM8350_DC2_RMP_SHIFT) | + (feedback << WM8350_DC2_FBSRC_SHIFT)); + break; + case WM8350_DCDC_5: + val = wm8350_reg_read(wm8350, WM8350_DCDC5_CONTROL) + & ~(WM8350_DC5_MODE_MASK | WM8350_DC5_ILIM_MASK | + WM8350_DC5_RMP_MASK | WM8350_DC5_FBSRC_MASK); + wm8350_reg_write(wm8350, WM8350_DCDC5_CONTROL, val | + (mode << WM8350_DC5_MODE_SHIFT) | + (ilim << WM8350_DC5_ILIM_SHIFT) | + (ramp << WM8350_DC5_RMP_SHIFT) | + (feedback << WM8350_DC5_FBSRC_SHIFT)); + break; + default: + return -EINVAL; + } + + return 0; +} +EXPORT_SYMBOL_GPL(wm8350_dcdc25_set_mode); + +static int wm8350_dcdc_enable(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int dcdc = rdev_get_id(rdev); + u16 shift; + + if (dcdc < WM8350_DCDC_1 || dcdc > WM8350_DCDC_6) + return -EINVAL; + + shift = dcdc - WM8350_DCDC_1; + wm8350_set_bits(wm8350, WM8350_DCDC_LDO_REQUESTED, 1 << shift); + return 0; +} + +static int wm8350_dcdc_disable(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int dcdc = rdev_get_id(rdev); + u16 shift; + + if (dcdc < WM8350_DCDC_1 || dcdc > WM8350_DCDC_6) + return -EINVAL; + + shift = dcdc - WM8350_DCDC_1; + wm8350_clear_bits(wm8350, WM8350_DCDC_LDO_REQUESTED, 1 << shift); + + return 0; +} + +static int wm8350_ldo_enable(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int ldo = rdev_get_id(rdev); + u16 shift; + + if (ldo < WM8350_LDO_1 || ldo > WM8350_LDO_4) + return -EINVAL; + + shift = (ldo - WM8350_LDO_1) + 8; + wm8350_set_bits(wm8350, WM8350_DCDC_LDO_REQUESTED, 1 << shift); + return 0; +} + +static int wm8350_ldo_disable(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int ldo = rdev_get_id(rdev); + u16 shift; + + if (ldo < WM8350_LDO_1 || ldo > WM8350_LDO_4) + return -EINVAL; + + shift = (ldo - WM8350_LDO_1) + 8; + wm8350_clear_bits(wm8350, WM8350_DCDC_LDO_REQUESTED, 1 << shift); + return 0; +} + +static int force_continuous_enable(struct wm8350 *wm8350, int dcdc, int enable) +{ + int reg = 0, ret; + + switch (dcdc) { + case WM8350_DCDC_1: + reg = WM8350_DCDC1_FORCE_PWM; + break; + case WM8350_DCDC_3: + reg = WM8350_DCDC3_FORCE_PWM; + break; + case WM8350_DCDC_4: + reg = WM8350_DCDC4_FORCE_PWM; + break; + case WM8350_DCDC_6: + reg = WM8350_DCDC6_FORCE_PWM; + break; + default: + return -EINVAL; + } + + if (enable) + ret = wm8350_set_bits(wm8350, reg, + WM8350_DCDC1_FORCE_PWM_ENA); + else + ret = wm8350_clear_bits(wm8350, reg, + WM8350_DCDC1_FORCE_PWM_ENA); + return ret; +} + +static int wm8350_dcdc_set_mode(struct regulator_dev *rdev, unsigned int mode) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int dcdc = rdev_get_id(rdev); + u16 val; + + if (dcdc < WM8350_DCDC_1 || dcdc > WM8350_DCDC_6) + return -EINVAL; + + if (dcdc == WM8350_DCDC_2 || dcdc == WM8350_DCDC_5) + return -EINVAL; + + val = 1 << (dcdc - WM8350_DCDC_1); + + switch (mode) { + case REGULATOR_MODE_FAST: + /* force continuous mode */ + wm8350_set_bits(wm8350, WM8350_DCDC_ACTIVE_OPTIONS, val); + wm8350_clear_bits(wm8350, WM8350_DCDC_SLEEP_OPTIONS, val); + force_continuous_enable(wm8350, dcdc, 1); + break; + case REGULATOR_MODE_NORMAL: + /* active / pulse skipping */ + wm8350_set_bits(wm8350, WM8350_DCDC_ACTIVE_OPTIONS, val); + wm8350_clear_bits(wm8350, WM8350_DCDC_SLEEP_OPTIONS, val); + force_continuous_enable(wm8350, dcdc, 0); + break; + case REGULATOR_MODE_IDLE: + /* standby mode */ + force_continuous_enable(wm8350, dcdc, 0); + wm8350_clear_bits(wm8350, WM8350_DCDC_SLEEP_OPTIONS, val); + wm8350_clear_bits(wm8350, WM8350_DCDC_ACTIVE_OPTIONS, val); + break; + case REGULATOR_MODE_STANDBY: + /* LDO mode */ + force_continuous_enable(wm8350, dcdc, 0); + wm8350_set_bits(wm8350, WM8350_DCDC_SLEEP_OPTIONS, val); + break; + } + + return 0; +} + +static unsigned int wm8350_dcdc_get_mode(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int dcdc = rdev_get_id(rdev); + u16 mask, sleep, active, force; + int mode = REGULATOR_MODE_NORMAL; + + if (dcdc < WM8350_DCDC_1 || dcdc > WM8350_DCDC_6) + return -EINVAL; + + if (dcdc == WM8350_DCDC_2 || dcdc == WM8350_DCDC_5) + return -EINVAL; + + mask = 1 << (dcdc - WM8350_DCDC_1); + active = wm8350_reg_read(wm8350, WM8350_DCDC_ACTIVE_OPTIONS) & mask; + sleep = wm8350_reg_read(wm8350, WM8350_DCDC_SLEEP_OPTIONS) & mask; + force = wm8350_reg_read(wm8350, WM8350_DCDC1_FORCE_PWM) + & WM8350_DCDC1_FORCE_PWM_ENA; + dev_dbg(wm8350->dev, "mask %x active %x sleep %x force %x", + mask, active, sleep, force); + + if (active && !sleep) { + if (force) + mode = REGULATOR_MODE_FAST; + else + mode = REGULATOR_MODE_NORMAL; + } else if (!active && !sleep) + mode = REGULATOR_MODE_IDLE; + else if (!sleep) + mode = REGULATOR_MODE_STANDBY; + + return mode; +} + +static unsigned int wm8350_ldo_get_mode(struct regulator_dev *rdev) +{ + return REGULATOR_MODE_NORMAL; +} + +struct wm8350_dcdc_efficiency { + int uA_load_min; + int uA_load_max; + unsigned int mode; +}; + +static const struct wm8350_dcdc_efficiency dcdc1_6_efficiency[] = { + {0, 10000, REGULATOR_MODE_STANDBY}, /* 0 - 10mA - LDO */ + {10000, 100000, REGULATOR_MODE_IDLE}, /* 10mA - 100mA - Standby */ + {100000, 1000000, REGULATOR_MODE_NORMAL}, /* > 100mA - Active */ + {-1, -1, REGULATOR_MODE_NORMAL}, +}; + +static const struct wm8350_dcdc_efficiency dcdc3_4_efficiency[] = { + {0, 10000, REGULATOR_MODE_STANDBY}, /* 0 - 10mA - LDO */ + {10000, 100000, REGULATOR_MODE_IDLE}, /* 10mA - 100mA - Standby */ + {100000, 800000, REGULATOR_MODE_NORMAL}, /* > 100mA - Active */ + {-1, -1, REGULATOR_MODE_NORMAL}, +}; + +static unsigned int get_mode(int uA, const struct wm8350_dcdc_efficiency *eff) +{ + int i = 0; + + while (eff[i].uA_load_min != -1) { + if (uA >= eff[i].uA_load_min && uA <= eff[i].uA_load_max) + return eff[i].mode; + } + return REGULATOR_MODE_NORMAL; +} + +/* Query the regulator for it's most efficient mode @ uV,uA + * WM8350 regulator efficiency is pretty similar over + * different input and output uV. + */ +static unsigned int wm8350_dcdc_get_optimum_mode(struct regulator_dev *rdev, + int input_uV, int output_uV, + int output_uA) +{ + int dcdc = rdev_get_id(rdev), mode; + + switch (dcdc) { + case WM8350_DCDC_1: + case WM8350_DCDC_6: + mode = get_mode(output_uA, dcdc1_6_efficiency); + break; + case WM8350_DCDC_3: + case WM8350_DCDC_4: + mode = get_mode(output_uA, dcdc3_4_efficiency); + break; + default: + mode = REGULATOR_MODE_NORMAL; + break; + } + return mode; +} + +static int wm8350_dcdc_is_enabled(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int dcdc = rdev_get_id(rdev), shift; + + if (dcdc < WM8350_DCDC_1 || dcdc > WM8350_DCDC_6) + return -EINVAL; + + shift = dcdc - WM8350_DCDC_1; + return wm8350_reg_read(wm8350, WM8350_DCDC_LDO_REQUESTED) + & (1 << shift); +} + +static int wm8350_ldo_is_enabled(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int ldo = rdev_get_id(rdev), shift; + + if (ldo < WM8350_LDO_1 || ldo > WM8350_LDO_4) + return -EINVAL; + + shift = (ldo - WM8350_LDO_1) + 8; + return wm8350_reg_read(wm8350, WM8350_DCDC_LDO_REQUESTED) + & (1 << shift); +} + +static struct regulator_ops wm8350_dcdc_ops = { + .set_voltage = wm8350_dcdc_set_voltage, + .get_voltage = wm8350_dcdc_get_voltage, + .enable = wm8350_dcdc_enable, + .disable = wm8350_dcdc_disable, + .get_mode = wm8350_dcdc_get_mode, + .set_mode = wm8350_dcdc_set_mode, + .get_optimum_mode = wm8350_dcdc_get_optimum_mode, + .is_enabled = wm8350_dcdc_is_enabled, + .set_suspend_voltage = wm8350_dcdc_set_suspend_voltage, + .set_suspend_enable = wm8350_dcdc_set_suspend_enable, + .set_suspend_disable = wm8350_dcdc_set_suspend_disable, + .set_suspend_mode = wm8350_dcdc_set_suspend_mode, +}; + +static struct regulator_ops wm8350_dcdc2_5_ops = { + .enable = wm8350_dcdc_enable, + .disable = wm8350_dcdc_disable, + .is_enabled = wm8350_dcdc_is_enabled, + .set_suspend_enable = wm8350_dcdc25_set_suspend_enable, + .set_suspend_disable = wm8350_dcdc25_set_suspend_disable, +}; + +static struct regulator_ops wm8350_ldo_ops = { + .set_voltage = wm8350_ldo_set_voltage, + .get_voltage = wm8350_ldo_get_voltage, + .enable = wm8350_ldo_enable, + .disable = wm8350_ldo_disable, + .is_enabled = wm8350_ldo_is_enabled, + .get_mode = wm8350_ldo_get_mode, + .set_suspend_voltage = wm8350_ldo_set_suspend_voltage, + .set_suspend_enable = wm8350_ldo_set_suspend_enable, + .set_suspend_disable = wm8350_ldo_set_suspend_disable, +}; + +static struct regulator_ops wm8350_isink_ops = { + .set_current_limit = wm8350_isink_set_current, + .get_current_limit = wm8350_isink_get_current, + .enable = wm8350_isink_enable, + .disable = wm8350_isink_disable, + .is_enabled = wm8350_isink_is_enabled, +}; + +static struct regulator_desc wm8350_reg[NUM_WM8350_REGULATORS] = { + { + .name = "DCDC1", + .id = WM8350_DCDC_1, + .ops = &wm8350_dcdc_ops, + .irq = WM8350_IRQ_UV_DC1, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "DCDC2", + .id = WM8350_DCDC_2, + .ops = &wm8350_dcdc2_5_ops, + .irq = WM8350_IRQ_UV_DC2, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "DCDC3", + .id = WM8350_DCDC_3, + .ops = &wm8350_dcdc_ops, + .irq = WM8350_IRQ_UV_DC3, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "DCDC4", + .id = WM8350_DCDC_4, + .ops = &wm8350_dcdc_ops, + .irq = WM8350_IRQ_UV_DC4, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "DCDC5", + .id = WM8350_DCDC_5, + .ops = &wm8350_dcdc2_5_ops, + .irq = WM8350_IRQ_UV_DC5, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "DCDC6", + .id = WM8350_DCDC_6, + .ops = &wm8350_dcdc_ops, + .irq = WM8350_IRQ_UV_DC6, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "LDO1", + .id = WM8350_LDO_1, + .ops = &wm8350_ldo_ops, + .irq = WM8350_IRQ_UV_LDO1, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "LDO2", + .id = WM8350_LDO_2, + .ops = &wm8350_ldo_ops, + .irq = WM8350_IRQ_UV_LDO2, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "LDO3", + .id = WM8350_LDO_3, + .ops = &wm8350_ldo_ops, + .irq = WM8350_IRQ_UV_LDO3, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "LDO4", + .id = WM8350_LDO_4, + .ops = &wm8350_ldo_ops, + .irq = WM8350_IRQ_UV_LDO4, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "ISINKA", + .id = WM8350_ISINK_A, + .ops = &wm8350_isink_ops, + .irq = WM8350_IRQ_CS1, + .type = REGULATOR_CURRENT, + .owner = THIS_MODULE, + }, + { + .name = "ISINKB", + .id = WM8350_ISINK_B, + .ops = &wm8350_isink_ops, + .irq = WM8350_IRQ_CS2, + .type = REGULATOR_CURRENT, + .owner = THIS_MODULE, + }, +}; + +static void pmic_uv_handler(struct wm8350 *wm8350, int irq, void *data) +{ + struct regulator_dev *rdev = (struct regulator_dev *)data; + + if (irq == WM8350_IRQ_CS1 || irq == WM8350_IRQ_CS2) + regulator_notifier_call_chain(rdev, + REGULATOR_EVENT_REGULATION_OUT, + wm8350); + else + regulator_notifier_call_chain(rdev, + REGULATOR_EVENT_UNDER_VOLTAGE, + wm8350); +} + +static int wm8350_regulator_probe(struct platform_device *pdev) +{ + struct wm8350 *wm8350 = dev_get_drvdata(&pdev->dev); + struct regulator_dev *rdev; + int ret; + u16 val; + + if (pdev->id < WM8350_DCDC_1 || pdev->id > WM8350_ISINK_B) + return -ENODEV; + + /* do any regulatior specific init */ + switch (pdev->id) { + case WM8350_DCDC_1: + val = wm8350_reg_read(wm8350, WM8350_DCDC1_LOW_POWER); + wm8350->pmic.dcdc1_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK; + break; + case WM8350_DCDC_3: + val = wm8350_reg_read(wm8350, WM8350_DCDC3_LOW_POWER); + wm8350->pmic.dcdc3_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK; + break; + case WM8350_DCDC_4: + val = wm8350_reg_read(wm8350, WM8350_DCDC4_LOW_POWER); + wm8350->pmic.dcdc4_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK; + break; + case WM8350_DCDC_6: + val = wm8350_reg_read(wm8350, WM8350_DCDC6_LOW_POWER); + wm8350->pmic.dcdc6_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK; + break; + } + + + /* register regulator */ + rdev = regulator_register(&wm8350_reg[pdev->id], &pdev->dev, + dev_get_drvdata(&pdev->dev)); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "failed to register %s\n", + wm8350_reg[pdev->id].name); + return PTR_ERR(rdev); + } + + /* register regulator IRQ */ + ret = wm8350_register_irq(wm8350, wm8350_reg[pdev->id].irq, + pmic_uv_handler, rdev); + if (ret < 0) { + regulator_unregister(rdev); + dev_err(&pdev->dev, "failed to register regulator %s IRQ\n", + wm8350_reg[pdev->id].name); + return ret; + } + + wm8350_unmask_irq(wm8350, wm8350_reg[pdev->id].irq); + + return 0; +} + +static int wm8350_regulator_remove(struct platform_device *pdev) +{ + struct regulator_dev *rdev = platform_get_drvdata(pdev); + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + + wm8350_mask_irq(wm8350, wm8350_reg[pdev->id].irq); + wm8350_free_irq(wm8350, wm8350_reg[pdev->id].irq); + + regulator_unregister(rdev); + + return 0; +} + +int wm8350_register_regulator(struct wm8350 *wm8350, int reg, + struct regulator_init_data *initdata) +{ + struct platform_device *pdev; + int ret; + + if (wm8350->pmic.pdev[reg]) + return -EBUSY; + + pdev = platform_device_alloc("wm8350-regulator", reg); + if (!pdev) + return -ENOMEM; + + wm8350->pmic.pdev[reg] = pdev; + + initdata->driver_data = wm8350; + + pdev->dev.platform_data = initdata; + pdev->dev.parent = wm8350->dev; + platform_set_drvdata(pdev, wm8350); + + ret = platform_device_add(pdev); + + if (ret != 0) { + dev_err(wm8350->dev, "Failed to register regulator %d: %d\n", + reg, ret); + platform_device_del(pdev); + wm8350->pmic.pdev[reg] = NULL; + } + + return ret; +} +EXPORT_SYMBOL_GPL(wm8350_register_regulator); + +static struct platform_driver wm8350_regulator_driver = { + .probe = wm8350_regulator_probe, + .remove = wm8350_regulator_remove, + .driver = { + .name = "wm8350-regulator", + }, +}; + +static int __init wm8350_regulator_init(void) +{ + return platform_driver_register(&wm8350_regulator_driver); +} +subsys_initcall(wm8350_regulator_init); + +static void __exit wm8350_regulator_exit(void) +{ + platform_driver_unregister(&wm8350_regulator_driver); +} +module_exit(wm8350_regulator_exit); + +/* Module information */ +MODULE_AUTHOR("Liam Girdwood"); +MODULE_DESCRIPTION("WM8350 voltage and current regulator driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 129eef96c9e25ce6516e2ddd5a338a14362b815b Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Wed, 27 Aug 2008 04:16:08 +0800 Subject: da903x: add regulator support for DA9030/DA9034 Signed-off-by: Eric Miao Signed-off-by: Mike Rapoport Signed-off-by: Liam Girdwood --- drivers/regulator/Kconfig | 8 + drivers/regulator/Makefile | 1 + drivers/regulator/da903x.c | 513 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 522 insertions(+) create mode 100644 drivers/regulator/da903x.c (limited to 'drivers/regulator') diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index a620023169b..4dada6ee111 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -72,4 +72,12 @@ config REGULATOR_WM8400 This driver provides support for the voltage regulators of the WM8400 AudioPlus PMIC. +config REGULATOR_DA903X + tristate "Support regulators on Dialog Semiconductor DA9030/DA9034 PMIC" + depends on PMIC_DA903X + select REGULATOR + help + Say y here to support the BUCKs and LDOs regulators found on + Dialog Semiconductor DA9030/DA9034 PMIC. + endmenu diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 0de39fe2eae..254d40c02ee 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -10,5 +10,6 @@ obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o +obj-$(CONFIG_REGULATOR_DA903X) += da903x.o ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c new file mode 100644 index 00000000000..3688e339db8 --- /dev/null +++ b/drivers/regulator/da903x.c @@ -0,0 +1,513 @@ +/* + * Regulators driver for Dialog Semiconductor DA903x + * + * Copyright (C) 2006-2008 Marvell International Ltd. + * Copyright (C) 2008 Compulab Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +/* DA9030 Registers */ +#define DA9030_INVAL (-1) +#define DA9030_LDO1011 (0x10) +#define DA9030_LDO15 (0x11) +#define DA9030_LDO1416 (0x12) +#define DA9030_LDO1819 (0x13) +#define DA9030_LDO17 (0x14) +#define DA9030_BUCK2DVM1 (0x15) +#define DA9030_BUCK2DVM2 (0x16) +#define DA9030_RCTL11 (0x17) +#define DA9030_RCTL21 (0x18) +#define DA9030_LDO1 (0x90) +#define DA9030_LDO23 (0x91) +#define DA9030_LDO45 (0x92) +#define DA9030_LDO6 (0x93) +#define DA9030_LDO78 (0x94) +#define DA9030_LDO912 (0x95) +#define DA9030_BUCK (0x96) +#define DA9030_RCTL12 (0x97) +#define DA9030_RCTL22 (0x98) +#define DA9030_LDO_UNLOCK (0xa0) +#define DA9030_LDO_UNLOCK_MASK (0xe0) +#define DA9034_OVER1 (0x10) + +/* DA9034 Registers */ +#define DA9034_INVAL (-1) +#define DA9034_OVER2 (0x11) +#define DA9034_OVER3 (0x12) +#define DA9034_LDO643 (0x13) +#define DA9034_LDO987 (0x14) +#define DA9034_LDO1110 (0x15) +#define DA9034_LDO1312 (0x16) +#define DA9034_LDO1514 (0x17) +#define DA9034_VCC1 (0x20) +#define DA9034_ADTV1 (0x23) +#define DA9034_ADTV2 (0x24) +#define DA9034_AVRC (0x25) +#define DA9034_CDTV1 (0x26) +#define DA9034_CDTV2 (0x27) +#define DA9034_CVRC (0x28) +#define DA9034_SDTV1 (0x29) +#define DA9034_SDTV2 (0x2a) +#define DA9034_SVRC (0x2b) +#define DA9034_MDTV1 (0x32) +#define DA9034_MDTV2 (0x33) +#define DA9034_MVRC (0x34) + +struct da903x_regulator_info { + struct regulator_desc desc; + + int min_uV; + int max_uV; + int step_uV; + int vol_reg; + int vol_shift; + int vol_nbits; + int update_reg; + int update_bit; + int enable_reg; + int enable_bit; +}; + +static inline int check_range(struct da903x_regulator_info *info, + int min_uV, int max_uV) +{ + if (min_uV < info->min_uV || min_uV > info->max_uV) + return -EINVAL; + + return 0; +} + +/* DA9030/DA9034 common operations */ +static int da903x_set_ldo_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da9034_dev = rdev_get_dev(rdev)->parent; + uint8_t val, mask; + + if (check_range(info, min_uV, max_uV)) { + pr_err("invalid voltage range (%d, %d) uV", min_uV, max_uV); + return -EINVAL; + } + + val = (min_uV - info->min_uV + info->step_uV - 1) / info->step_uV; + val <<= info->vol_shift; + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + + return da903x_update(da9034_dev, info->vol_reg, val, mask); +} + +static int da903x_get_voltage(struct regulator_dev *rdev) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da9034_dev = rdev_get_dev(rdev)->parent; + uint8_t val, mask; + int ret; + + ret = da903x_read(da9034_dev, info->vol_reg, &val); + if (ret) + return ret; + + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + val = (val & mask) >> info->vol_shift; + + return info->min_uV + info->step_uV * val; +} + +static int da903x_enable(struct regulator_dev *rdev) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da9034_dev = rdev_get_dev(rdev)->parent; + + return da903x_set_bits(da9034_dev, info->enable_reg, + 1 << info->enable_bit); +} + +static int da903x_disable(struct regulator_dev *rdev) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da9034_dev = rdev_get_dev(rdev)->parent; + + return da903x_clr_bits(da9034_dev, info->enable_reg, + 1 << info->enable_bit); +} + +static int da903x_is_enabled(struct regulator_dev *rdev) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da9034_dev = rdev_get_dev(rdev)->parent; + uint8_t reg_val; + int ret; + + ret = da903x_read(da9034_dev, info->enable_reg, ®_val); + if (ret) + return ret; + + return reg_val & (1 << info->enable_bit); +} + +/* DA9030 specific operations */ +static int da9030_set_ldo1_15_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da903x_dev = rdev_get_dev(rdev)->parent; + uint8_t val, mask; + int ret; + + if (check_range(info, min_uV, max_uV)) { + pr_err("invalid voltage range (%d, %d) uV", min_uV, max_uV); + return -EINVAL; + } + + val = (min_uV - info->min_uV + info->step_uV - 1) / info->step_uV; + val <<= info->vol_shift; + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + val |= DA9030_LDO_UNLOCK; /* have to set UNLOCK bits */ + mask |= DA9030_LDO_UNLOCK_MASK; + + /* write twice */ + ret = da903x_update(da903x_dev, info->vol_reg, val, mask); + if (ret) + return ret; + + return da903x_update(da903x_dev, info->vol_reg, val, mask); +} + +static int da9030_set_ldo14_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da903x_dev = rdev_get_dev(rdev)->parent; + uint8_t val, mask; + int thresh; + + if (check_range(info, min_uV, max_uV)) { + pr_err("invalid voltage range (%d, %d) uV", min_uV, max_uV); + return -EINVAL; + } + + thresh = (info->max_uV + info->min_uV) / 2; + if (min_uV < thresh) { + val = (thresh - min_uV + info->step_uV - 1) / info->step_uV; + val |= 0x4; + } else { + val = (min_uV - thresh + info->step_uV - 1) / info->step_uV; + } + + val <<= info->vol_shift; + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + + return da903x_update(da903x_dev, info->vol_reg, val, mask); +} + +static int da9030_get_ldo14_voltage(struct regulator_dev *rdev) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da903x_dev = rdev_get_dev(rdev)->parent; + uint8_t val, mask; + int ret; + + ret = da903x_read(da903x_dev, info->vol_reg, &val); + if (ret) + return ret; + + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + val = (val & mask) >> info->vol_shift; + + if (val & 0x4) + return info->min_uV + info->step_uV * (3 - (val & ~0x4)); + else + return (info->max_uV + info->min_uV) / 2 + + info->step_uV * (val & ~0x4); +} + +/* DA9034 specific operations */ +static int da9034_set_dvc_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da9034_dev = rdev_get_dev(rdev)->parent; + uint8_t val, mask; + int ret; + + if (check_range(info, min_uV, max_uV)) { + pr_err("invalid voltage range (%d, %d) uV", min_uV, max_uV); + return -EINVAL; + } + + val = (min_uV - info->min_uV + info->step_uV - 1) / info->step_uV; + val <<= info->vol_shift; + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + + ret = da903x_update(da9034_dev, info->vol_reg, val, mask); + if (ret) + return ret; + + ret = da903x_set_bits(da9034_dev, info->update_reg, + 1 << info->update_bit); + return ret; +} + +static int da9034_set_ldo12_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da9034_dev = rdev_get_dev(rdev)->parent; + uint8_t val, mask; + + if (check_range(info, min_uV, max_uV)) { + pr_err("invalid voltage range (%d, %d) uV", min_uV, max_uV); + return -EINVAL; + } + + val = (min_uV - info->min_uV + info->step_uV - 1) / info->step_uV; + val = (val > 7 || val < 20) ? 8 : val - 12; + val <<= info->vol_shift; + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + + return da903x_update(da9034_dev, info->vol_reg, val, mask); +} + +static int da9034_get_ldo12_voltage(struct regulator_dev *rdev) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da9034_dev = rdev_get_dev(rdev)->parent; + uint8_t val, mask; + int ret; + + ret = da903x_read(da9034_dev, info->vol_reg, &val); + if (ret) + return ret; + + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + val = (val & mask) >> info->vol_shift; + + if (val >= 8) + return 2700000 + info->step_uV * (val - 8); + + return info->min_uV + info->step_uV * val; +} + +static struct regulator_ops da903x_regulator_ldo_ops = { + .set_voltage = da903x_set_ldo_voltage, + .get_voltage = da903x_get_voltage, + .enable = da903x_enable, + .disable = da903x_disable, + .is_enabled = da903x_is_enabled, +}; + +/* NOTE: this is dedicated for the insane DA9030 LDO14 */ +static struct regulator_ops da9030_regulator_ldo14_ops = { + .set_voltage = da9030_set_ldo14_voltage, + .get_voltage = da9030_get_ldo14_voltage, + .enable = da903x_enable, + .disable = da903x_disable, + .is_enabled = da903x_is_enabled, +}; + +/* NOTE: this is dedicated for the DA9030 LDO1 and LDO15 that have locks */ +static struct regulator_ops da9030_regulator_ldo1_15_ops = { + .set_voltage = da9030_set_ldo1_15_voltage, + .get_voltage = da903x_get_voltage, + .enable = da903x_enable, + .disable = da903x_disable, + .is_enabled = da903x_is_enabled, +}; + +static struct regulator_ops da9034_regulator_dvc_ops = { + .set_voltage = da9034_set_dvc_voltage, + .get_voltage = da903x_get_voltage, + .enable = da903x_enable, + .disable = da903x_disable, + .is_enabled = da903x_is_enabled, +}; + +/* NOTE: this is dedicated for the insane LDO12 */ +static struct regulator_ops da9034_regulator_ldo12_ops = { + .set_voltage = da9034_set_ldo12_voltage, + .get_voltage = da9034_get_ldo12_voltage, + .enable = da903x_enable, + .disable = da903x_disable, + .is_enabled = da903x_is_enabled, +}; + +#define DA903x_LDO(_pmic, _id, min, max, step, vreg, shift, nbits, ereg, ebit) \ +{ \ + .desc = { \ + .name = "LDO" #_id, \ + .ops = &da903x_regulator_ldo_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = _pmic##_ID_LDO##_id, \ + .owner = THIS_MODULE, \ + }, \ + .min_uV = (min) * 1000, \ + .max_uV = (max) * 1000, \ + .step_uV = (step) * 1000, \ + .vol_reg = _pmic##_##vreg, \ + .vol_shift = (shift), \ + .vol_nbits = (nbits), \ + .enable_reg = _pmic##_##ereg, \ + .enable_bit = (ebit), \ +} + +#define DA9034_DVC(_id, min, max, step, vreg, nbits, ureg, ubit, ereg, ebit) \ +{ \ + .desc = { \ + .name = #_id, \ + .ops = &da9034_regulator_dvc_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = DA9034_ID_##_id, \ + .owner = THIS_MODULE, \ + }, \ + .min_uV = (min) * 1000, \ + .max_uV = (max) * 1000, \ + .step_uV = (step) * 1000, \ + .vol_reg = DA9034_##vreg, \ + .vol_shift = (0), \ + .vol_nbits = (nbits), \ + .update_reg = DA9034_##ureg, \ + .update_bit = (ubit), \ + .enable_reg = DA9034_##ereg, \ + .enable_bit = (ebit), \ +} + +#define DA9034_LDO(_id, min, max, step, vreg, shift, nbits, ereg, ebit) \ + DA903x_LDO(DA9034, _id, min, max, step, vreg, shift, nbits, ereg, ebit) + +#define DA9030_LDO(_id, min, max, step, vreg, shift, nbits, ereg, ebit) \ + DA903x_LDO(DA9030, _id, min, max, step, vreg, shift, nbits, ereg, ebit) + +static struct da903x_regulator_info da903x_regulator_info[] = { + /* DA9030 */ + DA9030_LDO( 1, 1200, 3200, 100, LDO1, 0, 5, RCTL12, 1), + DA9030_LDO( 2, 1800, 3200, 100, LDO23, 0, 4, RCTL12, 2), + DA9030_LDO( 3, 1800, 3200, 100, LDO23, 4, 4, RCTL12, 3), + DA9030_LDO( 4, 1800, 3200, 100, LDO45, 0, 4, RCTL12, 4), + DA9030_LDO( 5, 1800, 3200, 100, LDO45, 4, 4, RCTL12, 5), + DA9030_LDO( 6, 1800, 3200, 100, LDO6, 0, 4, RCTL12, 6), + DA9030_LDO( 7, 1800, 3200, 100, LDO78, 0, 4, RCTL12, 7), + DA9030_LDO( 8, 1800, 3200, 100, LDO78, 4, 4, RCTL22, 0), + DA9030_LDO( 9, 1800, 3200, 100, LDO912, 0, 4, RCTL22, 1), + DA9030_LDO(10, 1800, 3200, 100, LDO1011, 0, 4, RCTL22, 2), + DA9030_LDO(11, 1800, 3200, 100, LDO1011, 4, 4, RCTL22, 3), + DA9030_LDO(12, 1800, 3200, 100, LDO912, 4, 4, RCTL22, 4), + DA9030_LDO(14, 2760, 2940, 30, LDO1416, 0, 3, RCTL11, 4), + DA9030_LDO(15, 1100, 2650, 50, LDO15, 0, 5, RCTL11, 5), + DA9030_LDO(16, 1100, 2650, 50, LDO1416, 3, 5, RCTL11, 6), + DA9030_LDO(17, 1800, 3200, 100, LDO17, 0, 4, RCTL11, 7), + DA9030_LDO(18, 1800, 3200, 100, LDO1819, 0, 4, RCTL21, 2), + DA9030_LDO(19, 1800, 3200, 100, LDO1819, 4, 4, RCTL21, 1), + DA9030_LDO(13, 2100, 2100, 0, INVAL, 0, 0, RCTL11, 3), /* fixed @2.1V */ + + /* DA9034 */ + DA9034_DVC(BUCK1, 725, 1500, 25, ADTV1, 5, VCC1, 0, OVER1, 0), + DA9034_DVC(BUCK2, 725, 1500, 25, CDTV1, 5, VCC1, 2, OVER1, 1), + DA9034_DVC(LDO2, 725, 1500, 25, SDTV1, 5, VCC1, 4, OVER1, 2), + DA9034_DVC(LDO1, 1700, 2075, 25, MDTV1, 4, VCC1, 6, OVER3, 4), + + DA9034_LDO( 3, 1800, 3300, 100, LDO643, 0, 4, OVER3, 5), + DA9034_LDO( 4, 1800, 2900,1100, LDO643, 4, 1, OVER3, 6), + DA9034_LDO( 6, 2500, 2850, 50, LDO643, 5, 3, OVER2, 0), + DA9034_LDO( 7, 2700, 3050, 50, LDO987, 0, 3, OVER2, 1), + DA9034_LDO( 8, 2700, 2850, 50, LDO987, 3, 2, OVER2, 2), + DA9034_LDO( 9, 2700, 3050, 50, LDO987, 5, 3, OVER2, 3), + DA9034_LDO(10, 2700, 3050, 50, LDO1110, 0, 3, OVER2, 4), + DA9034_LDO(11, 1800, 3300, 100, LDO1110, 4, 4, OVER2, 5), + DA9034_LDO(12, 1700, 3050, 50, LDO1312, 0, 4, OVER3, 6), + DA9034_LDO(13, 1800, 3300, 100, LDO1312, 4, 4, OVER2, 7), + DA9034_LDO(14, 1800, 3300, 100, LDO1514, 0, 4, OVER3, 0), + DA9034_LDO(15, 1800, 3300, 100, LDO1514, 4, 4, OVER3, 1), + DA9034_LDO(5, 3100, 3100, 0, INVAL, 0, 0, OVER3, 7), /* fixed @3.1V */ +}; + +static inline struct da903x_regulator_info *find_regulator_info(int id) +{ + struct da903x_regulator_info *ri; + int i; + + for (i = 0; i < ARRAY_SIZE(da903x_regulator_info); i++) { + ri = &da903x_regulator_info[i]; + if (ri->desc.id == id) + return ri; + } + return NULL; +} + +static int __devinit da903x_regulator_probe(struct platform_device *pdev) +{ + struct da903x_regulator_info *ri = NULL; + struct regulator_dev *rdev; + + ri = find_regulator_info(pdev->id); + if (ri == NULL) { + dev_err(&pdev->dev, "invalid regulator ID specified\n"); + return -EINVAL; + } + + /* Workaround for the weird LDO12 voltage setting */ + if (ri->desc.id == DA9034_ID_LDO12) + ri->desc.ops = &da9034_regulator_ldo12_ops; + + if (ri->desc.id == DA9030_ID_LDO14) + ri->desc.ops = &da9030_regulator_ldo14_ops; + + if (ri->desc.id == DA9030_ID_LDO1 || ri->desc.id == DA9030_ID_LDO15) + ri->desc.ops = &da9030_regulator_ldo1_15_ops; + + rdev = regulator_register(&ri->desc, pdev->dev.parent, ri); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "failed to register regulator %s\n", + ri->desc.name); + return PTR_ERR(rdev); + } + + platform_set_drvdata(pdev, rdev); + return 0; +} + +static int __devexit da903x_regulator_remove(struct platform_device *pdev) +{ + struct regulator_dev *rdev = platform_get_drvdata(pdev); + + regulator_unregister(rdev); + return 0; +} + +static struct platform_driver da903x_regulator_driver = { + .driver = { + .name = "da903x-regulator", + .owner = THIS_MODULE, + }, + .probe = da903x_regulator_probe, + .remove = da903x_regulator_remove, +}; + +static int __init da903x_regulator_init(void) +{ + return platform_driver_register(&da903x_regulator_driver); +} +module_init(da903x_regulator_init); + +static void __exit da903x_regulator_exit(void) +{ + platform_driver_unregister(&da903x_regulator_driver); +} +module_exit(da903x_regulator_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Eric Miao " + "Mike Rapoport "); +MODULE_DESCRIPTION("Regulator Driver for Dialog Semiconductor DA903X PMIC"); +MODULE_ALIAS("platform:da903x-regulator"); -- cgit v1.2.3