From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/sbus/char/cd180.h | 240 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 240 insertions(+) create mode 100644 drivers/sbus/char/cd180.h (limited to 'drivers/sbus/char/cd180.h') diff --git a/drivers/sbus/char/cd180.h b/drivers/sbus/char/cd180.h new file mode 100644 index 00000000000..445b86cc65e --- /dev/null +++ b/drivers/sbus/char/cd180.h @@ -0,0 +1,240 @@ + +/* Definitions for Cirrus Logic CL-CD180 8-port async mux chip */ +#define CD180_NCH 8 /* Total number of channels */ +#define CD180_TPC 16 /* Ticks per character */ +#define CD180_NFIFO 8 /* TX FIFO size */ + +/* Global registers */ +#define CD180_GFRCR 0x6b /* Global Firmware Revision Code Register */ +#define CD180_SRCR 0x66 /* Service Request Configuration Register */ +#define CD180_PPRH 0x70 /* Prescaler Period Register High */ +#define CD180_PPRL 0x71 /* Prescaler Period Register Low */ +#define CD180_MSMR 0x61 /* Modem Service Match Register */ +#define CD180_TSMR 0x62 /* Transmit Service Match Register */ +#define CD180_RSMR 0x63 /* Receive Service Match Register */ +#define CD180_GSVR 0x40 /* Global Service Vector Register */ +#define CD180_SRSR 0x65 /* Service Request Status Register */ +#define CD180_GSCR 0x41 /* Global Service Channel Register */ +#define CD180_CAR 0x64 /* Channel Access Register */ + +/* Indexed registers */ +#define CD180_RDCR 0x07 /* Receive Data Count Register */ +#define CD180_RDR 0x78 /* Receiver Data Register */ +#define CD180_RCSR 0x7a /* Receiver Character Status Register */ +#define CD180_TDR 0x7b /* Transmit Data Register */ +#define CD180_EOSRR 0x7f /* End of Service Request Register */ + +/* Channel Registers */ +#define CD180_SRER 0x02 /* Service Request Enable Register */ +#define CD180_CCR 0x01 /* Channel Command Register */ +#define CD180_COR1 0x03 /* Channel Option Register 1 */ +#define CD180_COR2 0x04 /* Channel Option Register 2 */ +#define CD180_COR3 0x05 /* Channel Option Register 3 */ +#define CD180_CCSR 0x06 /* Channel Control Status Register */ +#define CD180_RTPR 0x18 /* Receive Timeout Period Register */ +#define CD180_RBPRH 0x31 /* Receive Bit Rate Period Register High */ +#define CD180_RBPRL 0x32 /* Receive Bit Rate Period Register Low */ +#define CD180_TBPRH 0x39 /* Transmit Bit Rate Period Register High */ +#define CD180_TBPRL 0x3a /* Transmit Bit Rate Period Register Low */ +#define CD180_SCHR1 0x09 /* Special Character Register 1 */ +#define CD180_SCHR2 0x0a /* Special Character Register 2 */ +#define CD180_SCHR3 0x0b /* Special Character Register 3 */ +#define CD180_SCHR4 0x0c /* Special Character Register 4 */ +#define CD180_MCR 0x12 /* Modem Change Register */ +#define CD180_MCOR1 0x10 /* Modem Change Option 1 Register */ +#define CD180_MCOR2 0x11 /* Modem Change Option 2 Register */ +#define CD180_MSVR 0x28 /* Modem Signal Value Register */ +#define CD180_MSVRTS 0x29 /* Modem Signal Value RTS */ +#define CD180_MSVDTR 0x2a /* Modem Signal Value DTR */ + +/* Global Interrupt Vector Register (R/W) */ + +#define GSVR_ITMASK 0x07 /* Interrupt type mask */ +#define GSVR_IT_MDM 0x01 /* Modem Signal Change Interrupt */ +#define GSVR_IT_TX 0x02 /* Transmit Data Interrupt */ +#define GSVR_IT_RGD 0x03 /* Receive Good Data Interrupt */ +#define GSVR_IT_REXC 0x07 /* Receive Exception Interrupt */ + + +/* Global Interrupt Channel Register (R/W) */ + +#define GSCR_CHAN 0x1c /* Channel Number Mask */ +#define GSCR_CHAN_OFF 2 /* Channel Number Offset */ + + +/* Channel Address Register (R/W) */ + +#define CAR_CHAN 0x07 /* Channel Number Mask */ + + +/* Receive Character Status Register (R/O) */ + +#define RCSR_TOUT 0x80 /* Rx Timeout */ +#define RCSR_SCDET 0x70 /* Special Character Detected Mask */ +#define RCSR_NO_SC 0x00 /* No Special Characters Detected */ +#define RCSR_SC_1 0x10 /* Special Char 1 (or 1 & 3) Detected */ +#define RCSR_SC_2 0x20 /* Special Char 2 (or 2 & 4) Detected */ +#define RCSR_SC_3 0x30 /* Special Char 3 Detected */ +#define RCSR_SC_4 0x40 /* Special Char 4 Detected */ +#define RCSR_BREAK 0x08 /* Break has been detected */ +#define RCSR_PE 0x04 /* Parity Error */ +#define RCSR_FE 0x02 /* Frame Error */ +#define RCSR_OE 0x01 /* Overrun Error */ + + +/* Channel Command Register (R/W) (commands in groups can be OR-ed) */ + +#define CCR_HARDRESET 0x81 /* Reset the chip */ + +#define CCR_SOFTRESET 0x80 /* Soft Channel Reset */ + +#define CCR_CORCHG1 0x42 /* Channel Option Register 1 Changed */ +#define CCR_CORCHG2 0x44 /* Channel Option Register 2 Changed */ +#define CCR_CORCHG3 0x48 /* Channel Option Register 3 Changed */ + +#define CCR_SSCH1 0x21 /* Send Special Character 1 */ + +#define CCR_SSCH2 0x22 /* Send Special Character 2 */ + +#define CCR_SSCH3 0x23 /* Send Special Character 3 */ + +#define CCR_SSCH4 0x24 /* Send Special Character 4 */ + +#define CCR_TXEN 0x18 /* Enable Transmitter */ +#define CCR_RXEN 0x12 /* Enable Receiver */ + +#define CCR_TXDIS 0x14 /* Disable Transmitter */ +#define CCR_RXDIS 0x11 /* Disable Receiver */ + + +/* Service Request Enable Register (R/W) */ + +#define SRER_DSR 0x80 /* Enable interrupt on DSR change */ +#define SRER_CD 0x40 /* Enable interrupt on CD change */ +#define SRER_CTS 0x20 /* Enable interrupt on CTS change */ +#define SRER_RXD 0x10 /* Enable interrupt on Receive Data */ +#define SRER_RXSC 0x08 /* Enable interrupt on Receive Spec. Char */ +#define SRER_TXRDY 0x04 /* Enable interrupt on TX FIFO empty */ +#define SRER_TXEMPTY 0x02 /* Enable interrupt on TX completely empty */ +#define SRER_RET 0x01 /* Enable interrupt on RX Exc. Timeout */ + + +/* Channel Option Register 1 (R/W) */ + +#define COR1_ODDP 0x80 /* Odd Parity */ +#define COR1_PARMODE 0x60 /* Parity Mode mask */ +#define COR1_NOPAR 0x00 /* No Parity */ +#define COR1_FORCEPAR 0x20 /* Force Parity */ +#define COR1_NORMPAR 0x40 /* Normal Parity */ +#define COR1_IGNORE 0x10 /* Ignore Parity on RX */ +#define COR1_STOPBITS 0x0c /* Number of Stop Bits */ +#define COR1_1SB 0x00 /* 1 Stop Bit */ +#define COR1_15SB 0x04 /* 1.5 Stop Bits */ +#define COR1_2SB 0x08 /* 2 Stop Bits */ +#define COR1_CHARLEN 0x03 /* Character Length */ +#define COR1_5BITS 0x00 /* 5 bits */ +#define COR1_6BITS 0x01 /* 6 bits */ +#define COR1_7BITS 0x02 /* 7 bits */ +#define COR1_8BITS 0x03 /* 8 bits */ + + +/* Channel Option Register 2 (R/W) */ + +#define COR2_IXM 0x80 /* Implied XON mode */ +#define COR2_TXIBE 0x40 /* Enable In-Band (XON/XOFF) Flow Control */ +#define COR2_ETC 0x20 /* Embedded Tx Commands Enable */ +#define COR2_LLM 0x10 /* Local Loopback Mode */ +#define COR2_RLM 0x08 /* Remote Loopback Mode */ +#define COR2_RTSAO 0x04 /* RTS Automatic Output Enable */ +#define COR2_CTSAE 0x02 /* CTS Automatic Enable */ +#define COR2_DSRAE 0x01 /* DSR Automatic Enable */ + + +/* Channel Option Register 3 (R/W) */ + +#define COR3_XONCH 0x80 /* XON is a pair of characters (1 & 3) */ +#define COR3_XOFFCH 0x40 /* XOFF is a pair of characters (2 & 4) */ +#define COR3_FCT 0x20 /* Flow-Control Transparency Mode */ +#define COR3_SCDE 0x10 /* Special Character Detection Enable */ +#define COR3_RXTH 0x0f /* RX FIFO Threshold value (1-8) */ + + +/* Channel Control Status Register (R/O) */ + +#define CCSR_RXEN 0x80 /* Receiver Enabled */ +#define CCSR_RXFLOFF 0x40 /* Receive Flow Off (XOFF was sent) */ +#define CCSR_RXFLON 0x20 /* Receive Flow On (XON was sent) */ +#define CCSR_TXEN 0x08 /* Transmitter Enabled */ +#define CCSR_TXFLOFF 0x04 /* Transmit Flow Off (got XOFF) */ +#define CCSR_TXFLON 0x02 /* Transmit Flow On (got XON) */ + + +/* Modem Change Option Register 1 (R/W) */ + +#define MCOR1_DSRZD 0x80 /* Detect 0->1 transition of DSR */ +#define MCOR1_CDZD 0x40 /* Detect 0->1 transition of CD */ +#define MCOR1_CTSZD 0x20 /* Detect 0->1 transition of CTS */ +#define MCOR1_DTRTH 0x0f /* Auto DTR flow control Threshold (1-8) */ +#define MCOR1_NODTRFC 0x0 /* Automatic DTR flow control disabled */ + + +/* Modem Change Option Register 2 (R/W) */ + +#define MCOR2_DSROD 0x80 /* Detect 1->0 transition of DSR */ +#define MCOR2_CDOD 0x40 /* Detect 1->0 transition of CD */ +#define MCOR2_CTSOD 0x20 /* Detect 1->0 transition of CTS */ + + +/* Modem Change Register (R/W) */ + +#define MCR_DSRCHG 0x80 /* DSR Changed */ +#define MCR_CDCHG 0x40 /* CD Changed */ +#define MCR_CTSCHG 0x20 /* CTS Changed */ + + +/* Modem Signal Value Register (R/W) */ + +#define MSVR_DSR 0x80 /* Current state of DSR input */ +#define MSVR_CD 0x40 /* Current state of CD input */ +#define MSVR_CTS 0x20 /* Current state of CTS input */ +#define MSVR_DTR 0x02 /* Current state of DTR output */ +#define MSVR_RTS 0x01 /* Current state of RTS output */ + + +/* Service Request Status Register */ + +#define SRSR_CMASK 0xC0 /* Current Service Context Mask */ +#define SRSR_CNONE 0x00 /* Not in a service context */ +#define SRSR_CRX 0x40 /* Rx Context */ +#define SRSR_CTX 0x80 /* Tx Context */ +#define SRSR_CMDM 0xC0 /* Modem Context */ +#define SRSR_ANYINT 0x6F /* Any interrupt flag */ +#define SRSR_RINT 0x10 /* Receive Interrupt */ +#define SRSR_TINT 0x04 /* Transmit Interrupt */ +#define SRSR_MINT 0x01 /* Modem Interrupt */ +#define SRSR_REXT 0x20 /* Receive External Interrupt */ +#define SRSR_TEXT 0x08 /* Transmit External Interrupt */ +#define SRSR_MEXT 0x02 /* Modem External Interrupt */ + + +/* Service Request Configuration Register */ + +#define SRCR_PKGTYPE 0x80 +#define SRCR_REGACKEN 0x40 +#define SRCR_DAISYEN 0x20 +#define SRCR_GLOBPRI 0x10 +#define SRCR_UNFAIR 0x08 +#define SRCR_AUTOPRI 0x02 +#define SRCR_PRISEL 0x01 + +/* Values for register-based Interrupt ACKs */ +#define CD180_ACK_MINT 0x75 /* goes to MSMR */ +#define CD180_ACK_TINT 0x76 /* goes to TSMR */ +#define CD180_ACK_RINT 0x77 /* goes to RSMR */ + +/* Escape characters */ + +#define CD180_C_ESC 0x00 /* Escape character */ +#define CD180_C_SBRK 0x81 /* Start sending BREAK */ +#define CD180_C_DELAY 0x82 /* Delay output */ +#define CD180_C_EBRK 0x83 /* Stop sending BREAK */ -- cgit v1.2.3