From 85ae97d816da3f8af9dcfbc4197a2950b55c3b0d Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Wed, 8 Mar 2006 00:14:22 -0800 Subject: [SCSI] drivers/scsi/FlashPoint.c: remove unused things * Remove unused #define's * Remove unused typedefs. * Remove prototypes for non-existing functions. Signed-off-by: Alexey Dobriyan Signed-off-by: Andrew Morton Signed-off-by: James Bottomley --- drivers/scsi/FlashPoint.c | 345 +--------------------------------------------- 1 file changed, 1 insertion(+), 344 deletions(-) (limited to 'drivers/scsi/FlashPoint.c') diff --git a/drivers/scsi/FlashPoint.c b/drivers/scsi/FlashPoint.c index 8d64f0bed62..38e6b71484b 100644 --- a/drivers/scsi/FlashPoint.c +++ b/drivers/scsi/FlashPoint.c @@ -47,15 +47,10 @@ #define SccbMgr_isr FlashPoint_HandleInterrupt -#define MAX_CDBLEN 12 -#define SCAM_LEV_2 1 #define CRCMASK 0xA001 -#define BL_VENDOR_ID 0x104B -#define FP_DEVICE_ID 0x8130 -#define MM_DEVICE_ID 0x1040 #define FAILURE 0xFFFFFFFFL @@ -65,15 +60,9 @@ typedef unsigned char UCHAR; typedef unsigned short USHORT; typedef unsigned int UINT; typedef unsigned long ULONG; -typedef unsigned char * PUCHAR; -typedef unsigned short* PUSHORT; -typedef unsigned long * PULONG; -typedef void * PVOID; -typedef unsigned char * uchar_ptr; typedef unsigned short * ushort_ptr; -typedef unsigned long * ulong_ptr; #define s08bits char @@ -84,9 +73,6 @@ typedef unsigned long * ulong_ptr; #define u16bits unsigned s16bits #define u32bits unsigned s32bits -typedef u08bits * pu08bits; -typedef u16bits * pu16bits; -typedef u32bits * pu32bits; #define BIT(x) ((UCHAR)(1<<(x))) /* single-bit mask in bit position x */ @@ -144,10 +130,6 @@ typedef SCCBMGR_INFO * PSCCBMGR_INFO; #define HARPOON_FAMILY 0x02 -#define ISA_BUS_CARD 0x01 -#define EISA_BUS_CARD 0x02 -#define PCI_BUS_CARD 0x03 -#define VESA_BUS_CARD 0x04 /* SCCB struct used for both SCCB and UCB manager compiles! * The UCB Manager treats the SCCB as it's 'native hardware structure' @@ -200,14 +182,11 @@ typedef struct _SCCB { ULONG Sccb_SGoffset; } SCCB; -#define SCCB_SIZE sizeof(SCCB) #pragma pack() -#define SCSI_INITIATOR_COMMAND 0x00 -#define TARGET_MODE_COMMAND 0x01 #define SCATTER_GATHER_COMMAND 0x02 #define RESIDUAL_COMMAND 0x03 #define RESIDUAL_SG_COMMAND 0x04 @@ -216,12 +195,10 @@ typedef struct _SCCB { #define F_USE_CMD_Q 0x20 /*Inidcates TAGGED command. */ #define TAG_TYPE_MASK 0xC0 /*Type of tag msg to send. */ -#define TAG_Q_MASK 0xE0 #define SCCB_DATA_XFER_OUT 0x10 /* Write */ #define SCCB_DATA_XFER_IN 0x08 /* Read */ -#define FOURTEEN_BYTES 0x00 /* Request Sense Buffer size */ #define NO_AUTO_REQUEST_SENSE 0x01 /* No Request Sense Buffer */ @@ -235,9 +212,7 @@ typedef struct _SCCB { #define DATA_OUT_ST 7 #define DATA_IN_ST 8 #define DISCONNECT_ST 9 -#define STATUS_ST 10 #define ABORT_ST 11 -#define MESSAGE_ST 12 #define F_HOST_XFER_DIR 0x01 @@ -249,7 +224,6 @@ typedef struct _SCCB { #define F_STATUSLOADED 0x01 -#define F_MSGLOADED 0x02 #define F_DEV_SELECTED 0x04 @@ -257,56 +231,39 @@ typedef struct _SCCB { #define SCCB_DATA_UNDER_RUN 0x0C #define SCCB_SELECTION_TIMEOUT 0x11 /* Set SCSI selection timed out */ #define SCCB_DATA_OVER_RUN 0x12 -#define SCCB_UNEXPECTED_BUS_FREE 0x13 /* Target dropped SCSI BSY */ #define SCCB_PHASE_SEQUENCE_FAIL 0x14 /* Target bus phase sequence failure */ -#define SCCB_INVALID_OP_CODE 0x16 /* SCCB invalid operation code */ -#define SCCB_INVALID_SCCB 0x1A /* Invalid SCCB - bad parameter */ #define SCCB_GROSS_FW_ERR 0x27 /* Major problem! */ #define SCCB_BM_ERR 0x30 /* BusMaster error. */ #define SCCB_PARITY_ERR 0x34 /* SCSI parity error */ -#define SCCB_INVALID_DIRECTION 0x18 /* Invalid target direction */ -#define SCCB_DUPLICATE_SCCB 0x19 /* Duplicate SCCB */ -#define SCCB_SCSI_RST 0x35 /* SCSI RESET detected. */ #define SCCB_IN_PROCESS 0x00 #define SCCB_SUCCESS 0x01 #define SCCB_ABORT 0x02 -#define SCCB_NOT_FOUND 0x03 #define SCCB_ERROR 0x04 -#define SCCB_INVALID 0x05 -#define SCCB_SIZE sizeof(SCCB) #define ORION_FW_REV 3110 -#define HARP_REVD 1 #define QUEUE_DEPTH 254+1 /*1 for Normal disconnect 32 for Q'ing. */ #define MAX_MB_CARDS 4 /* Max. no of cards suppoerted on Mother Board */ -#define WIDE_SCSI 1 #define MAX_SCSI_TAR 16 #define MAX_LUN 32 #define LUN_MASK 0x1f -#if defined(HARP_REVA) -#define SG_BUF_CNT 15 /*Number of prefetched elements. */ -#else #define SG_BUF_CNT 16 /*Number of prefetched elements. */ -#endif #define SG_ELEMENT_SIZE 8 /*Eight byte per element. */ -#define SG_LOCAL_MASK 0x00000000L -#define SG_ELEMENT_MASK 0xFFFFFFFFL #define RD_HARPOON(ioport) OS_InPortByte((u32bits)ioport) @@ -318,31 +275,25 @@ typedef struct _SCCB { #define TAR_SYNC_MASK (BIT(7)+BIT(6)) -#define SYNC_UNKNOWN 0x00 #define SYNC_TRYING BIT(6) #define SYNC_SUPPORTED (BIT(7)+BIT(6)) #define TAR_WIDE_MASK (BIT(5)+BIT(4)) -#define WIDE_DISABLED 0x00 #define WIDE_ENABLED BIT(4) #define WIDE_NEGOCIATED BIT(5) #define TAR_TAG_Q_MASK (BIT(3)+BIT(2)) -#define TAG_Q_UNKNOWN 0x00 #define TAG_Q_TRYING BIT(2) #define TAG_Q_REJECT BIT(3) -#define TAG_Q_SUPPORTED (BIT(3)+BIT(2)) #define TAR_ALLOW_DISC BIT(0) #define EE_SYNC_MASK (BIT(0)+BIT(1)) -#define EE_SYNC_ASYNC 0x00 #define EE_SYNC_5MB BIT(0) #define EE_SYNC_10MB BIT(1) #define EE_SYNC_20MB (BIT(0)+BIT(1)) -#define EE_ALLOW_DISC BIT(6) #define EE_WIDE_SCSI BIT(7) @@ -418,7 +369,6 @@ typedef struct SCCBcard *PSCCBcard; #define ID_STRING_LENGTH 32 #define TYPE_CODE0 0x63 /*Level2 Mstr (bits 7-6), */ -#define TYPE_CODE1 00 /*No ID yet */ #define SLV_TYPE_CODE0 0xA3 /*Priority Bit set (bits 7-6), */ @@ -430,16 +380,9 @@ typedef struct SCCBcard *PSCCBcard; #define ID_0_7 0x18 #define ID_8_F 0x11 -#define ID_10_17 0x12 -#define ID_18_1F 0x0B #define MISC_CODE 0x14 #define CLR_P_FLAG 0x18 -#define LOCATE_ON 0x12 -#define LOCATE_OFF 0x0B -#define LVL_1_MST 0x00 -#define LVL_2_MST 0x40 -#define DOM_LVL_2 0xC0 #define INIT_SELTD 0x01 @@ -455,64 +398,24 @@ typedef struct SCCBscam_info { UCHAR id_string[ID_STRING_LENGTH]; enum scam_id_st state; -} SCCBSCAM_INFO, *PSCCBSCAM_INFO; +} SCCBSCAM_INFO; -#define SCSI_TEST_UNIT_READY 0x00 -#define SCSI_REZERO_UNIT 0x01 #define SCSI_REQUEST_SENSE 0x03 -#define SCSI_FORMAT_UNIT 0x04 -#define SCSI_REASSIGN 0x07 #define SCSI_READ 0x08 #define SCSI_WRITE 0x0A -#define SCSI_SEEK 0x0B -#define SCSI_INQUIRY 0x12 -#define SCSI_MODE_SELECT 0x15 -#define SCSI_RESERVE_UNIT 0x16 -#define SCSI_RELEASE_UNIT 0x17 -#define SCSI_MODE_SENSE 0x1A #define SCSI_START_STOP_UNIT 0x1B -#define SCSI_SEND_DIAGNOSTIC 0x1D -#define SCSI_READ_CAPACITY 0x25 #define SCSI_READ_EXTENDED 0x28 #define SCSI_WRITE_EXTENDED 0x2A -#define SCSI_SEEK_EXTENDED 0x2B #define SCSI_WRITE_AND_VERIFY 0x2E -#define SCSI_VERIFY 0x2F -#define SCSI_READ_DEFECT_DATA 0x37 -#define SCSI_WRITE_BUFFER 0x3B -#define SCSI_READ_BUFFER 0x3C -#define SCSI_RECV_DIAGNOSTIC 0x1C -#define SCSI_READ_LONG 0x3E -#define SCSI_WRITE_LONG 0x3F -#define SCSI_LAST_SCSI_CMND SCSI_WRITE_LONG -#define SCSI_INVALID_CMND 0xFF #define SSGOOD 0x00 #define SSCHECK 0x02 -#define SSCOND_MET 0x04 -#define SSBUSY 0x08 -#define SSRESERVATION_CONFLICT 0x18 -#define SSCMD_TERM 0x22 #define SSQ_FULL 0x28 -#define SKNO_SEN 0x00 -#define SKRECOV_ERR 0x01 -#define SKNOT_RDY 0x02 -#define SKMED_ERR 0x03 -#define SKHW_ERR 0x04 -#define SKILL_REQ 0x05 -#define SKUNIT_ATTN 0x06 -#define SKDATA_PROTECT 0x07 -#define SKBLNK_CHK 0x08 -#define SKCPY_ABORT 0x0A -#define SKABORT_CMD 0x0B -#define SKEQUAL 0x0C -#define SKVOL_OVF 0x0D -#define SKMIS_CMP 0x0E #define SMCMD_COMP 0x00 @@ -520,7 +423,6 @@ typedef struct SCCBscam_info { #define SMSAVE_DATA_PTR 0x02 #define SMREST_DATA_PTR 0x03 #define SMDISC 0x04 -#define SMINIT_DETEC_ERR 0x05 #define SMABORT 0x06 #define SMREJECT 0x07 #define SMNO_OP 0x08 @@ -535,35 +437,22 @@ typedef struct SCCBscam_info { #define SMSYNC 0x01 -#define SM10MBS 0x19 /* 100ns */ -#define SM5MBS 0x32 /* 200ns */ -#define SMOFFSET 0x0F /* Maxoffset value */ #define SMWDTR 0x03 #define SM8BIT 0x00 #define SM16BIT 0x01 -#define SM32BIT 0x02 #define SMIGNORWR 0x23 /* Ignore Wide Residue */ -#define ARBITRATION_DELAY 0x01 /* 2.4us using a 40Mhz clock */ -#define BUS_SETTLE_DELAY 0x01 /* 400ns */ -#define BUS_CLEAR_DELAY 0x01 /* 800ns */ -#define SPHASE_TO 0x0A /* 10 second timeout waiting for */ -#define SCMD_TO 0x0F /* Overall command timeout */ #define SIX_BYTE_CMD 0x06 -#define TEN_BYTE_CMD 0x0A #define TWELVE_BYTE_CMD 0x0C #define ASYNC 0x00 -#define PERI25NS 0x06 /* 25/4ns to next clock for xbow. */ -#define SYNC10MBS 0x19 -#define SYNC5MBS 0x32 #define MAX_OFFSET 0x0F /* Maxbyteoffset for Sync Xfers */ @@ -572,19 +461,11 @@ typedef struct SCCBscam_info { #define EEPROM_CHECK_SUM 0 #define FW_SIGNATURE 2 #define MODEL_NUMB_0 4 -#define MODEL_NUMB_1 5 #define MODEL_NUMB_2 6 -#define MODEL_NUMB_3 7 #define MODEL_NUMB_4 8 -#define MODEL_NUMB_5 9 -#define IO_BASE_ADDR 10 -#define IRQ_NUMBER 12 -#define PCI_INT_PIN 13 -#define BUS_DELAY 14 /*On time in byte 14 off delay in 15 */ #define SYSTEM_CONFIG 16 #define SCSI_CONFIG 17 #define BIOS_CONFIG 18 -#define SPIN_UP_DELAY 19 #define SCAM_CONFIG 20 #define ADAPTER_SCSI_ID 24 @@ -609,7 +490,6 @@ typedef struct SCCBscam_info { - #define DOM_MASTER (BIT(0) + BIT(1)) #define SCAM_ENABLED BIT(2) #define SCAM_LEVEL2 BIT(3) @@ -644,16 +524,9 @@ typedef struct SCCBscam_info { /* Sub Vendor ID and Sub Device ID only available in Harpoon Version 2 and higher */ - #define hp_sub_vendor_id_0 0x04 /* LSB */ - #define hp_sub_vendor_id_1 0x05 /* MSB */ #define hp_sub_device_id_0 0x06 /* LSB */ - #define hp_sub_device_id_1 0x07 /* MSB */ - #define hp_dual_addr_lo 0x08 - #define hp_dual_addr_lmi 0x09 - #define hp_dual_addr_hmi 0x0A - #define hp_dual_addr_hi 0x0B #define hp_semaphore 0x0C #define SCCB_MGR_ACTIVE BIT(0) @@ -661,9 +534,7 @@ typedef struct SCCBscam_info { #define SCCB_MGR_PRESENT BIT(3) #define BIOS_IN_USE BIT(4) - #define hp_user_defined_D 0x0D - #define hp_reserved_E 0x0E #define hp_sys_ctrl 0x0F @@ -671,95 +542,49 @@ typedef struct SCCBscam_info { #define DRVR_RST BIT(1) /*Firmware Reset to 80C15 chip */ #define HALT_MACH BIT(3) /*Halt State Machine */ #define HARD_ABORT BIT(4) /*Hard Abort */ - #define DIAG_MODE BIT(5) /*Diagnostic Mode */ - #define BM_ABORT_TMOUT 0x50 /*Halt State machine time out */ - #define hp_sys_cfg 0x10 - #define DONT_RST_FIFO BIT(7) /*Don't reset FIFO */ - #define hp_host_ctrl0 0x11 - #define DUAL_ADDR_MODE BIT(0) /*Enable 64-bit addresses */ - #define IO_MEM_SPACE BIT(1) /*I/O Memory Space */ - #define RESOURCE_LOCK BIT(2) /*Enable Resource Lock */ - #define IGNOR_ACCESS_ERR BIT(3) /*Ignore Access Error */ - #define HOST_INT_EDGE BIT(4) /*Host interrupt level/edge mode sel */ - #define SIX_CLOCKS BIT(5) /*6 Clocks between Strobe */ - #define DMA_EVEN_PARITY BIT(6) /*Enable DMA Enen Parity */ -/* - #define BURST_MODE BIT(0) -*/ - #define hp_reserved_12 0x12 #define hp_host_blk_cnt 0x13 - #define XFER_BLK1 0x00 /* 0 0 0 1 byte per block*/ - #define XFER_BLK2 0x01 /* 0 0 1 2 byte per block*/ - #define XFER_BLK4 0x02 /* 0 1 0 4 byte per block*/ - #define XFER_BLK8 0x03 /* 0 1 1 8 byte per block*/ - #define XFER_BLK16 0x04 /* 1 0 0 16 byte per block*/ - #define XFER_BLK32 0x05 /* 1 0 1 32 byte per block*/ #define XFER_BLK64 0x06 /* 1 1 0 64 byte per block*/ #define BM_THRESHOLD 0x40 /* PCI mode can only xfer 16 bytes*/ - #define hp_reserved_14 0x14 - #define hp_reserved_15 0x15 - #define hp_reserved_16 0x16 #define hp_int_mask 0x17 #define INT_CMD_COMPL BIT(0) /* DMA command complete */ #define INT_EXT_STATUS BIT(1) /* Extended Status Set */ - #define INT_SCSI BIT(2) /* Scsi block interrupt */ - #define INT_FIFO_RDY BIT(4) /* FIFO data ready */ #define hp_xfer_cnt_lo 0x18 - #define hp_xfer_cnt_mi 0x19 #define hp_xfer_cnt_hi 0x1A #define hp_xfer_cmd 0x1B #define XFER_HOST_DMA 0x00 /* 0 0 0 Transfer Host -> DMA */ #define XFER_DMA_HOST 0x01 /* 0 0 1 Transfer DMA -> Host */ - #define XFER_HOST_MPU 0x02 /* 0 1 0 Transfer Host -> MPU */ - #define XFER_MPU_HOST 0x03 /* 0 1 1 Transfer MPU -> Host */ - #define XFER_DMA_MPU 0x04 /* 1 0 0 Transfer DMA -> MPU */ - #define XFER_MPU_DMA 0x05 /* 1 0 1 Transfer MPU -> DMA */ - #define SET_SEMAPHORE 0x06 /* 1 1 0 Set Semaphore */ - #define XFER_NOP 0x07 /* 1 1 1 Transfer NOP */ - #define XFER_MB_MPU 0x06 /* 1 1 0 Transfer MB -> MPU */ - #define XFER_MB_DMA 0x07 /* 1 1 1 Transfer MB -> DMA */ #define XFER_HOST_AUTO 0x00 /* 0 0 Auto Transfer Size */ - #define XFER_HOST_8BIT 0x08 /* 0 1 8 BIT Transfer Size */ - #define XFER_HOST_16BIT 0x10 /* 1 0 16 BIT Transfer Size */ - #define XFER_HOST_32BIT 0x18 /* 1 1 32 BIT Transfer Size */ #define XFER_DMA_8BIT 0x20 /* 0 1 8 BIT Transfer Size */ - #define XFER_DMA_16BIT 0x40 /* 1 0 16 BIT Transfer Size */ #define DISABLE_INT BIT(7) /*Do not interrupt at end of cmd. */ #define HOST_WRT_CMD ((DISABLE_INT + XFER_HOST_DMA + XFER_HOST_AUTO + XFER_DMA_8BIT)) #define HOST_RD_CMD ((DISABLE_INT + XFER_DMA_HOST + XFER_HOST_AUTO + XFER_DMA_8BIT)) - #define WIDE_HOST_WRT_CMD ((DISABLE_INT + XFER_HOST_DMA + XFER_HOST_AUTO + XFER_DMA_16BIT)) - #define WIDE_HOST_RD_CMD ((DISABLE_INT + XFER_DMA_HOST + XFER_HOST_AUTO + XFER_DMA_16BIT)) #define hp_host_addr_lo 0x1C - #define hp_host_addr_lmi 0x1D #define hp_host_addr_hmi 0x1E - #define hp_host_addr_hi 0x1F - #define hp_pio_data 0x20 - #define hp_reserved_21 0x21 #define hp_ee_ctrl 0x22 #define EXT_ARB_ACK BIT(7) @@ -777,17 +602,8 @@ typedef struct SCCBscam_info { #define EWDS 0x04 #define EWDS_ADDR 0x0000 - #define hp_brdctl 0x23 - #define DAT_7 BIT(7) - #define DAT_6 BIT(6) - #define DAT_5 BIT(5) - #define BRD_STB BIT(4) - #define BRD_CS BIT(3) - #define BRD_WR BIT(2) - #define hp_reserved_24 0x24 - #define hp_reserved_25 0x25 @@ -796,70 +612,36 @@ typedef struct SCCBscam_info { #define SCSI_TERM_ENA_L BIT(0) /*Enable/Disable external terminators */ #define FLUSH_XFER_CNTR BIT(1) /*Flush transfer counter */ - #define BM_XFER_MIN_8 BIT(2) /*Enable bus master transfer of 9 */ - #define BIOS_ENA BIT(3) /*Enable BIOS/FLASH Enable */ #define FORCE1_XFER BIT(5) /*Always xfer one byte in byte mode */ #define FAST_SINGLE BIT(6) /*?? */ #define BMCTRL_DEFAULT (FORCE1_XFER|FAST_SINGLE|SCSI_TERM_ENA_L) - #define hp_reserved_27 0x27 #define hp_sg_addr 0x28 #define hp_page_ctrl 0x29 #define SCATTER_EN BIT(0) #define SGRAM_ARAM BIT(1) - #define BIOS_SHADOW BIT(2) #define G_INT_DISABLE BIT(3) /* Enable/Disable all Interrupts */ #define NARROW_SCSI_CARD BIT(4) /* NARROW/WIDE SCSI config pin */ - #define hp_reserved_2A 0x2A - #define hp_pci_cmd_cfg 0x2B - #define IO_SPACE_ENA BIT(0) /*enable I/O space */ - #define MEM_SPACE_ENA BIT(1) /*enable memory space */ - #define BUS_MSTR_ENA BIT(2) /*enable bus master operation */ - #define MEM_WI_ENA BIT(4) /*enable Write and Invalidate */ - #define PAR_ERR_RESP BIT(6) /*enable parity error responce. */ - #define hp_reserved_2C 0x2C #define hp_pci_stat_cfg 0x2D - #define DATA_PARITY_ERR BIT(0) - #define REC_TARGET_ABORT BIT(4) /*received Target abort */ #define REC_MASTER_ABORT BIT(5) /*received Master abort */ - #define SIG_SYSTEM_ERR BIT(6) - #define DETECTED_PAR_ERR BIT(7) - #define hp_reserved_2E 0x2E - #define hp_sys_status 0x2F - #define SLV_DATA_RDY BIT(0) /*Slave data ready */ - #define XFER_CNT_ZERO BIT(1) /*Transfer counter = 0 */ - #define BM_FIFO_EMPTY BIT(2) /*FIFO empty */ - #define BM_FIFO_FULL BIT(3) /*FIFO full */ - #define HOST_OP_DONE BIT(4) /*host operation done */ - #define DMA_OP_DONE BIT(5) /*DMA operation done */ - #define SLV_OP_DONE BIT(6) /*Slave operation done */ - #define PWR_ON_FLAG BIT(7) /*Power on flag */ - #define hp_reserved_30 0x30 - #define hp_host_status0 0x31 - #define HOST_TERM BIT(5) /*Host Terminal Count */ - #define HOST_TRSHLD BIT(6) /*Host Threshold */ - #define CONNECTED_2_HOST BIT(7) /*Connected to Host */ - #define hp_reserved_32 0x32 #define hp_rev_num 0x33 - #define REV_A_CONST 0x0E - #define REV_B_CONST 0x0E #define hp_stack_data 0x34 #define hp_stack_addr 0x35 @@ -869,8 +651,6 @@ typedef struct SCCBscam_info { #define BM_FORCE_OFF BIT(0) /*Bus Master is forced to get off */ #define PCI_TGT_ABORT BIT(0) /*PCI bus master transaction aborted */ #define PCI_DEV_TMOUT BIT(1) /*PCI Device Time out */ - #define FIFO_TC_NOT_ZERO BIT(2) /*FIFO or transfer counter not zero */ - #define CHIP_RST_OCCUR BIT(3) /*Chip reset occurs */ #define CMD_ABORTED BIT(4) /*Command aborted */ #define BM_PARITY_ERR BIT(5) /*parity error on data received */ #define PIO_OVERRUN BIT(6) /*Slave data overrun */ @@ -880,24 +660,13 @@ typedef struct SCCBscam_info { #define hp_int_status 0x37 - #define BM_CMD_CMPL BIT(0) /*Bus Master command complete */ #define EXT_STATUS_ON BIT(1) /*Extended status is valid */ #define SCSI_INTERRUPT BIT(2) /*Global indication of a SCSI int. */ - #define BM_FIFO_RDY BIT(4) #define INT_ASSERTED BIT(5) /* */ - #define SRAM_BUSY BIT(6) /*Scatter/Gather RAM busy */ - #define CMD_REG_BUSY BIT(7) #define hp_fifo_cnt 0x38 - #define hp_curr_host_cnt 0x39 - #define hp_reserved_3A 0x3A - #define hp_fifo_in_addr 0x3B - #define hp_fifo_out_addr 0x3C - #define hp_reserved_3D 0x3D - #define hp_reserved_3E 0x3E - #define hp_reserved_3F 0x3F @@ -937,9 +706,7 @@ typedef struct SCCBscam_info { #define SCSI_IOBIT BIT(0) #define S_SCSI_PHZ (BIT(2)+BIT(1)+BIT(0)) - #define S_CMD_PH (BIT(2) ) #define S_MSGO_PH (BIT(2)+BIT(1) ) - #define S_STAT_PH (BIT(2) +BIT(0)) #define S_MSGI_PH (BIT(2)+BIT(1)+BIT(0)) #define S_DATAI_PH ( BIT(0)) #define S_DATAO_PH 0x00 @@ -947,7 +714,6 @@ typedef struct SCCBscam_info { #define hp_scsictrl_0 0x45 - #define NO_ARB BIT(7) #define SEL_TAR BIT(6) #define ENA_ATN BIT(4) #define ENA_RESEL BIT(2) @@ -969,44 +735,33 @@ typedef struct SCCBscam_info { #define hp_scsireset 0x47 - #define SCSI_TAR BIT(7) #define SCSI_INI BIT(6) #define SCAM_EN BIT(5) - #define ACK_HOLD BIT(4) #define DMA_RESET BIT(3) #define HPSCSI_RESET BIT(2) #define PROG_RESET BIT(1) #define FIFO_CLR BIT(0) #define hp_xfercnt_0 0x48 - #define hp_xfercnt_1 0x49 #define hp_xfercnt_2 0x4A - #define hp_xfercnt_3 0x4B #define hp_fifodata_0 0x4C - #define hp_fifodata_1 0x4D #define hp_addstat 0x4E #define SCAM_TIMER BIT(7) - #define AUTO_RUNNING BIT(6) - #define FAST_SYNC BIT(5) #define SCSI_MODE8 BIT(3) #define SCSI_PAR_ERR BIT(0) #define hp_prgmcnt_0 0x4F - #define AUTO_PC_MASK 0x3F #define hp_selfid_0 0x50 #define hp_selfid_1 0x51 #define hp_arb_id 0x52 - #define ARB_ID (BIT(3) + BIT(2) + BIT(1) + BIT(0)) #define hp_select_id 0x53 - #define RESEL_ID (BIT(7) + BIT(6) + BIT(5) + BIT(4)) - #define SELECT_ID (BIT(3) + BIT(2) + BIT(1) + BIT(0)) #define hp_synctarg_base 0x54 #define hp_synctarg_12 0x54 @@ -1029,63 +784,38 @@ typedef struct SCCBscam_info { #define hp_synctarg_2 0x62 #define hp_synctarg_3 0x63 - #define RATE_20MB 0x00 - #define RATE_10MB ( BIT(5)) - #define RATE_6_6MB ( BIT(6) ) - #define RATE_5MB ( BIT(6)+BIT(5)) - #define RATE_4MB (BIT(7) ) - #define RATE_3_33MB (BIT(7) +BIT(5)) - #define RATE_2_85MB (BIT(7)+BIT(6) ) - #define RATE_2_5MB (BIT(7)+BIT(5)+BIT(6)) - #define NEXT_CLK BIT(5) - #define SLOWEST_SYNC (BIT(7)+BIT(6)+BIT(5)) #define NARROW_SCSI BIT(4) - #define SYNC_OFFSET (BIT(3) + BIT(2) + BIT(1) + BIT(0)) - #define DEFAULT_ASYNC 0x00 #define DEFAULT_OFFSET 0x0F #define hp_autostart_0 0x64 #define hp_autostart_1 0x65 - #define hp_autostart_2 0x66 #define hp_autostart_3 0x67 - #define DISABLE 0x00 #define AUTO_IMMED BIT(5) #define SELECT BIT(6) - #define RESELECT (BIT(6)+BIT(5)) - #define BUSFREE BIT(7) - #define XFER_0 (BIT(7)+BIT(5)) #define END_DATA (BIT(7)+BIT(6)) - #define MSG_PHZ (BIT(7)+BIT(6)+BIT(5)) #define hp_gp_reg_0 0x68 #define hp_gp_reg_1 0x69 - #define hp_gp_reg_2 0x6A #define hp_gp_reg_3 0x6B #define hp_seltimeout 0x6C - #define TO_2ms 0x54 /* 2.0503ms */ #define TO_4ms 0x67 /* 3.9959ms */ #define TO_5ms 0x03 /* 4.9152ms */ #define TO_10ms 0x07 /* 11.xxxms */ #define TO_250ms 0x99 /* 250.68ms */ #define TO_290ms 0xB1 /* 289.99ms */ - #define TO_350ms 0xD6 /* 350.62ms */ - #define TO_417ms 0xFF /* 417.79ms */ #define hp_clkctrl_0 0x6D #define PWR_DWN BIT(6) #define ACTdeassert BIT(4) - #define ATNonErr BIT(3) - #define CLK_30MHZ BIT(1) #define CLK_40MHZ (BIT(1) + BIT(0)) - #define CLK_50MHZ BIT(2) #define CLKCTRL_DEFAULT (ACTdeassert | CLK_40MHZ) @@ -1095,38 +825,21 @@ typedef struct SCCBscam_info { #define hp_offsetctr 0x70 #define hp_xferstat 0x71 - #define FIFO_FULL BIT(7) #define FIFO_EMPTY BIT(6) - #define FIFO_MASK 0x3F /* Mask for the FIFO count value. */ - #define FIFO_LEN 0x20 #define hp_portctrl_1 0x72 - #define EVEN_HOST_P BIT(5) - #define INVT_SCSI BIT(4) #define CHK_SCSI_P BIT(3) #define HOST_MODE8 BIT(0) - #define HOST_MODE16 0x00 #define hp_xfer_pad 0x73 #define ID_UNLOCK BIT(3) - #define XFER_PAD BIT(2) #define hp_scsidata_0 0x74 #define hp_scsidata_1 0x75 - #define hp_timer_0 0x76 - #define hp_timer_1 0x77 - #define hp_reserved_78 0x78 - #define hp_reserved_79 0x79 - #define hp_reserved_7A 0x7A - #define hp_reserved_7B 0x7B - #define hp_reserved_7C 0x7C - #define hp_reserved_7D 0x7D - #define hp_reserved_7E 0x7E - #define hp_reserved_7F 0x7F #define hp_aramBase 0x80 #define BIOS_DATA_OFFSET 0x60 @@ -1135,22 +848,15 @@ typedef struct SCCBscam_info { - #define AUTO_LEN 0x80 - #define AR0 0x00 - #define AR1 BITW(8) - #define AR2 BITW(9) #define AR3 (BITW(9) + BITW(8)) #define SDATA BITW(10) - #define NOP_OP 0x00 /* Nop command */ #define CRD_OP BITW(11) /* Cmp Reg. w/ Data */ #define CRR_OP BITW(12) /* Cmp Reg. w. Reg. */ - #define CBE_OP (BITW(14)+BITW(12)+BITW(11)) /* Cmp SCSI cmd class & Branch EQ */ - #define CBN_OP (BITW(14)+BITW(13)) /* Cmp SCSI cmd class & Branch NOT EQ */ #define CPE_OP (BITW(14)+BITW(11)) /* Cmp SCSI phs & Branch EQ */ @@ -1163,7 +869,6 @@ typedef struct SCCBscam_info { #define ASTATUS (BITW(10)+BITW(8)) #define AMSG_OUT (BITW(10)+BITW(9)) #define AMSG_IN (BITW(10)+BITW(9)+BITW(8)) - #define AILLEGAL (BITW(9)+BITW(8)) #define BRH_OP BITW(13) /* Branch */ @@ -1176,17 +881,11 @@ typedef struct SCCBscam_info { #define TCB_OP (BITW(13)+BITW(11)) /* Test condition & branch */ - #define ATN_SET BITW(8) - #define ATN_RESET BITW(9) - #define XFER_CNT (BITW(9)+BITW(8)) #define FIFO_0 BITW(10) - #define FIFO_NOT0 (BITW(10)+BITW(8)) - #define T_USE_SYNC0 (BITW(10)+BITW(9)) #define MPM_OP BITW(15) /* Match phase and move data */ - #define MDR_OP (BITW(12)+BITW(11)) /* Move data to Reg. */ #define MRR_OP BITW(14) /* Move DReg. to Reg. */ @@ -1196,34 +895,14 @@ typedef struct SCCBscam_info { #define D_AR0 0x00 #define D_AR1 BIT(0) - #define D_AR2 BIT(1) - #define D_AR3 (BIT(1) + BIT(0)) - #define D_SDATA BIT(2) #define D_BUCKET (BIT(2) + BIT(1) + BIT(0)) - #define ADR_OP (BITW(13)+BITW(12)) /* Logical AND Reg. w. Data */ - #define ADS_OP (BITW(14)+BITW(13)+BITW(12)) - #define ODR_OP (BITW(13)+BITW(12)+BITW(11)) - #define ODS_OP (BITW(14)+BITW(13)+BITW(12)+BITW(11)) - #define STR_OP (BITW(15)+BITW(14)) /* Store to A_Reg. */ - #define AINT_ENA1 0x00 - #define AINT_STAT1 BITW(8) - #define ASCSI_SIG BITW(9) - #define ASCSI_CNTL (BITW(9)+BITW(8)) - #define APORT_CNTL BITW(10) - #define ARST_CNTL (BITW(10)+BITW(8)) - #define AXFERCNT0 (BITW(10)+BITW(9)) - #define AXFERCNT1 (BITW(10)+BITW(9)+BITW(8)) - #define AXFERCNT2 BITW(11) - #define AFIFO_DATA (BITW(11)+BITW(8)) - #define ASCSISELID (BITW(11)+BITW(9)) - #define ASCSISYNC0 (BITW(11)+BITW(9)+BITW(8)) #define RAT_OP (BITW(14)+BITW(13)+BITW(11)) @@ -1233,7 +912,6 @@ typedef struct SCCBscam_info { #define SSI_ITAR_DISC (ITAR_DISC >> 8) #define SSI_IDO_STRT (IDO_STRT >> 8) - #define SSI_IDI_STRT (IDO_STRT >> 8) #define SSI_ICMD_COMP (ICMD_COMP >> 8) #define SSI_ITICKLE (ITICKLE >> 8) @@ -1248,13 +926,11 @@ typedef struct SCCBscam_info { #define CMDPZ 0x04 /*Command phase */ #define DINT 0x12 /*Data Out/In interrupt */ #define DI 0x13 /*Data Out */ - #define MI 0x14 /*Message In */ #define DC 0x19 /*Disconnect Message */ #define ST 0x1D /*Status Phase */ #define UNKNWN 0x24 /*Unknown bus action */ #define CC 0x25 /*Command Completion failure */ #define TICK 0x26 /*New target reselected us. */ - #define RFAIL 0x27 /*Reselection failed */ #define SELCHK 0x28 /*Select & Check SCSI ID latch reg */ @@ -1268,25 +944,18 @@ typedef struct SCCBscam_info { #define TAG_STRT 0x00 - #define SELECTION_START 0x00 #define DISCONNECT_START 0x10/2 #define END_DATA_START 0x14/2 - #define NONTAG_STRT 0x02/2 #define CMD_ONLY_STRT CMDPZ/2 - #define TICKLE_STRT TICK/2 #define SELCHK_STRT SELCHK/2 -#define mEEPROM_CLK_DELAY(port) (RD_HARPOON(port+hp_intstat_1)) -#define mWAIT_10MS(port) (RD_HARPOON(port+hp_intstat_1)) -#define CLR_XFER_CNT(port) (WR_HARPOON(port+hp_xfercnt_0, 0x00)) -#define SET_XFER_CNT(port, data) (WR_HARP32(port,hp_xfercnt_0,data)) #define GET_XFER_CNT(port, xfercnt) {RD_HARP32(port,hp_xfercnt_0,xfercnt); xfercnt &= 0xFFFFFF;} /* #define GET_XFER_CNT(port, xfercnt) (xfercnt = RD_HARPOON(port+hp_xfercnt_2), \ @@ -1308,11 +977,7 @@ typedef struct SCCBscam_info { #define ACCEPT_MSG_ATN(port) {while(RD_HARPOON(port+hp_scsisig) & SCSI_REQ){}\ WR_HARPOON(port+hp_scsisig, (S_ILL_PH|SCSI_ATN));} -#define ACCEPT_STAT(port) {while(RD_HARPOON(port+hp_scsisig) & SCSI_REQ){}\ - WR_HARPOON(port+hp_scsisig, S_ILL_PH);} -#define ACCEPT_STAT_ATN(port) {while(RD_HARPOON(port+hp_scsisig) & SCSI_REQ){}\ - WR_HARPOON(port+hp_scsisig, (S_ILL_PH|SCSI_ATN));} #define DISABLE_AUTO(port) (WR_HARPOON(port+hp_scsireset, PROG_RESET),\ WR_HARPOON(port+hp_scsireset, 0x00)) @@ -1332,7 +997,6 @@ typedef struct SCCBscam_info { -void scsiStartAuto(ULONG port); static UCHAR FPT_sisyncn(ULONG port, UCHAR p_card, UCHAR syncFlag); static void FPT_ssel(ULONG port, UCHAR p_card); static void FPT_sres(ULONG port, UCHAR p_card, PSCCBcard pCurrCard); @@ -1405,7 +1069,6 @@ static void FPT_DiagEEPROM(ULONG p_port); -void busMstrAbort(ULONG port); static void FPT_dataXferProcessor(ULONG port, PSCCBcard pCurrCard); static void FPT_busMstrSGDataXferStart(ULONG port, PSCCB pCurrSCCB); static void FPT_busMstrDataXferStart(ULONG port, PSCCB pCurrSCCB); @@ -1446,12 +1109,6 @@ static void FPT_autoLoadDefaultMap(ULONG p_port); -void OS_start_timer(unsigned long ioport, unsigned long timeout); -void OS_stop_timer(unsigned long ioport, unsigned long timeout); -void OS_disable_int(unsigned char intvec); -void OS_enable_int(unsigned char intvec); -void OS_delay(unsigned long count); -int OS_VirtToPhys(u32bits CardHandle, u32bits *physaddr, u32bits *virtaddr); static SCCBMGR_TAR_INFO FPT_sccbMgrTbl[MAX_CARDS][MAX_SCSI_TAR] = { { { 0 } } }; static SCCBCARD FPT_BL_Card[MAX_CARDS] = { { 0 } }; -- cgit v1.2.3