From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/scsi/aacraid/dpcsup.c | 215 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 215 insertions(+) create mode 100644 drivers/scsi/aacraid/dpcsup.c (limited to 'drivers/scsi/aacraid/dpcsup.c') diff --git a/drivers/scsi/aacraid/dpcsup.c b/drivers/scsi/aacraid/dpcsup.c new file mode 100644 index 00000000000..8480b427a6d --- /dev/null +++ b/drivers/scsi/aacraid/dpcsup.c @@ -0,0 +1,215 @@ +/* + * Adaptec AAC series RAID controller driver + * (c) Copyright 2001 Red Hat Inc. + * + * based on the old aacraid driver that is.. + * Adaptec aacraid device driver for Linux. + * + * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Module Name: + * dpcsup.c + * + * Abstract: All DPC processing routines for the cyclone board occur here. + * + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "aacraid.h" + +/** + * aac_response_normal - Handle command replies + * @q: Queue to read from + * + * This DPC routine will be run when the adapter interrupts us to let us + * know there is a response on our normal priority queue. We will pull off + * all QE there are and wake up all the waiters before exiting. We will + * take a spinlock out on the queue before operating on it. + */ + +unsigned int aac_response_normal(struct aac_queue * q) +{ + struct aac_dev * dev = q->dev; + struct aac_entry *entry; + struct hw_fib * hwfib; + struct fib * fib; + int consumed = 0; + unsigned long flags; + + spin_lock_irqsave(q->lock, flags); + /* + * Keep pulling response QEs off the response queue and waking + * up the waiters until there are no more QEs. We then return + * back to the system. If no response was requesed we just + * deallocate the Fib here and continue. + */ + while(aac_consumer_get(dev, q, &entry)) + { + int fast; + u32 index = le32_to_cpu(entry->addr); + fast = index & 0x01; + fib = &dev->fibs[index >> 1]; + hwfib = fib->hw_fib; + + aac_consumer_free(dev, q, HostNormRespQueue); + /* + * Remove this fib from the Outstanding I/O queue. + * But only if it has not already been timed out. + * + * If the fib has been timed out already, then just + * continue. The caller has already been notified that + * the fib timed out. + */ + if (!(fib->flags & FIB_CONTEXT_FLAG_TIMED_OUT)) { + list_del(&fib->queue); + dev->queues->queue[AdapNormCmdQueue].numpending--; + } else { + printk(KERN_WARNING "aacraid: FIB timeout (%x).\n", fib->flags); + printk(KERN_DEBUG"aacraid: hwfib=%p fib index=%i fib=%p\n",hwfib, hwfib->header.SenderData,fib); + continue; + } + spin_unlock_irqrestore(q->lock, flags); + + if (fast) { + /* + * Doctor the fib + */ + *(u32 *)hwfib->data = cpu_to_le32(ST_OK); + hwfib->header.XferState |= cpu_to_le32(AdapterProcessed); + } + + FIB_COUNTER_INCREMENT(aac_config.FibRecved); + + if (hwfib->header.Command == cpu_to_le16(NuFileSystem)) + { + u32 *pstatus = (u32 *)hwfib->data; + if (*pstatus & cpu_to_le32(0xffff0000)) + *pstatus = cpu_to_le32(ST_OK); + } + if (hwfib->header.XferState & cpu_to_le32(NoResponseExpected | Async)) + { + if (hwfib->header.XferState & cpu_to_le32(NoResponseExpected)) + FIB_COUNTER_INCREMENT(aac_config.NoResponseRecved); + else + FIB_COUNTER_INCREMENT(aac_config.AsyncRecved); + /* + * NOTE: we cannot touch the fib after this + * call, because it may have been deallocated. + */ + fib->callback(fib->callback_data, fib); + } else { + unsigned long flagv; + spin_lock_irqsave(&fib->event_lock, flagv); + fib->done = 1; + up(&fib->event_wait); + spin_unlock_irqrestore(&fib->event_lock, flagv); + FIB_COUNTER_INCREMENT(aac_config.NormalRecved); + } + consumed++; + spin_lock_irqsave(q->lock, flags); + } + + if (consumed > aac_config.peak_fibs) + aac_config.peak_fibs = consumed; + if (consumed == 0) + aac_config.zero_fibs++; + + spin_unlock_irqrestore(q->lock, flags); + return 0; +} + + +/** + * aac_command_normal - handle commands + * @q: queue to process + * + * This DPC routine will be queued when the adapter interrupts us to + * let us know there is a command on our normal priority queue. We will + * pull off all QE there are and wake up all the waiters before exiting. + * We will take a spinlock out on the queue before operating on it. + */ + +unsigned int aac_command_normal(struct aac_queue *q) +{ + struct aac_dev * dev = q->dev; + struct aac_entry *entry; + unsigned long flags; + + spin_lock_irqsave(q->lock, flags); + + /* + * Keep pulling response QEs off the response queue and waking + * up the waiters until there are no more QEs. We then return + * back to the system. + */ + while(aac_consumer_get(dev, q, &entry)) + { + struct fib fibctx; + struct hw_fib * hw_fib; + u32 index; + struct fib *fib = &fibctx; + + index = le32_to_cpu(entry->addr) / sizeof(struct hw_fib); + hw_fib = &dev->aif_base_va[index]; + + /* + * Allocate a FIB at all costs. For non queued stuff + * we can just use the stack so we are happy. We need + * a fib object in order to manage the linked lists + */ + if (dev->aif_thread) + if((fib = kmalloc(sizeof(struct fib), GFP_ATOMIC)) == NULL) + fib = &fibctx; + + memset(fib, 0, sizeof(struct fib)); + INIT_LIST_HEAD(&fib->fiblink); + fib->type = FSAFS_NTC_FIB_CONTEXT; + fib->size = sizeof(struct fib); + fib->hw_fib = hw_fib; + fib->data = hw_fib->data; + fib->dev = dev; + + + if (dev->aif_thread && fib != &fibctx) { + list_add_tail(&fib->fiblink, &q->cmdq); + aac_consumer_free(dev, q, HostNormCmdQueue); + wake_up_interruptible(&q->cmdready); + } else { + aac_consumer_free(dev, q, HostNormCmdQueue); + spin_unlock_irqrestore(q->lock, flags); + /* + * Set the status of this FIB + */ + *(u32 *)hw_fib->data = cpu_to_le32(ST_OK); + fib_adapter_complete(fib, sizeof(u32)); + spin_lock_irqsave(q->lock, flags); + } + } + spin_unlock_irqrestore(q->lock, flags); + return 0; +} -- cgit v1.2.3