From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/scsi/arm/Kconfig | 89 ++ drivers/scsi/arm/Makefile | 14 + drivers/scsi/arm/acornscsi-io.S | 145 ++ drivers/scsi/arm/acornscsi.c | 3130 +++++++++++++++++++++++++++++++++++++++ drivers/scsi/arm/acornscsi.h | 358 +++++ drivers/scsi/arm/arxescsi.c | 395 +++++ drivers/scsi/arm/cumana_1.c | 357 +++++ drivers/scsi/arm/cumana_2.c | 556 +++++++ drivers/scsi/arm/ecoscsi.c | 239 +++ drivers/scsi/arm/eesox.c | 680 +++++++++ drivers/scsi/arm/fas216.c | 3043 +++++++++++++++++++++++++++++++++++++ drivers/scsi/arm/fas216.h | 394 +++++ drivers/scsi/arm/msgqueue.c | 171 +++ drivers/scsi/arm/msgqueue.h | 82 + drivers/scsi/arm/oak.c | 217 +++ drivers/scsi/arm/powertec.c | 472 ++++++ drivers/scsi/arm/queue.c | 319 ++++ drivers/scsi/arm/queue.h | 105 ++ drivers/scsi/arm/scsi.h | 115 ++ 19 files changed, 10881 insertions(+) create mode 100644 drivers/scsi/arm/Kconfig create mode 100644 drivers/scsi/arm/Makefile create mode 100644 drivers/scsi/arm/acornscsi-io.S create mode 100644 drivers/scsi/arm/acornscsi.c create mode 100644 drivers/scsi/arm/acornscsi.h create mode 100644 drivers/scsi/arm/arxescsi.c create mode 100644 drivers/scsi/arm/cumana_1.c create mode 100644 drivers/scsi/arm/cumana_2.c create mode 100644 drivers/scsi/arm/ecoscsi.c create mode 100644 drivers/scsi/arm/eesox.c create mode 100644 drivers/scsi/arm/fas216.c create mode 100644 drivers/scsi/arm/fas216.h create mode 100644 drivers/scsi/arm/msgqueue.c create mode 100644 drivers/scsi/arm/msgqueue.h create mode 100644 drivers/scsi/arm/oak.c create mode 100644 drivers/scsi/arm/powertec.c create mode 100644 drivers/scsi/arm/queue.c create mode 100644 drivers/scsi/arm/queue.h create mode 100644 drivers/scsi/arm/scsi.h (limited to 'drivers/scsi/arm') diff --git a/drivers/scsi/arm/Kconfig b/drivers/scsi/arm/Kconfig new file mode 100644 index 00000000000..54b32868aaf --- /dev/null +++ b/drivers/scsi/arm/Kconfig @@ -0,0 +1,89 @@ +# +# SCSI driver configuration for Acorn +# +config SCSI_ACORNSCSI_3 + tristate "Acorn SCSI card (aka30) support" + depends on ARCH_ACORN && SCSI + help + This enables support for the Acorn SCSI card (aka30). If you have an + Acorn system with one of these, say Y. If unsure, say N. + +config SCSI_ACORNSCSI_TAGGED_QUEUE + bool "Support SCSI 2 Tagged queueing" + depends on SCSI_ACORNSCSI_3 + help + Say Y here to enable tagged queuing support on the Acorn SCSI card. + + This is a feature of SCSI-2 which improves performance: the host + adapter can send several SCSI commands to a device's queue even if + previous commands haven't finished yet. Some SCSI devices don't + implement this properly, so the safe answer is N. + +config SCSI_ACORNSCSI_SYNC + bool "Support SCSI 2 Synchronous Transfers" + depends on SCSI_ACORNSCSI_3 + help + Say Y here to enable synchronous transfer negotiation with all + targets on the Acorn SCSI card. + + In general, this improves performance; however some SCSI devices + don't implement it properly, so the safe answer is N. + +config SCSI_ARXESCSI + tristate "ARXE SCSI support" + depends on ARCH_ACORN && SCSI + help + Around 1991, Arxe Systems Limited released a high density floppy + disc interface for the Acorn Archimedes range, to allow the use of + HD discs from the then new A5000 on earlier models. This interface + was either sold on its own or with an integral SCSI controller. + Technical details on this NCR53c94-based device are available at + + Say Y here to compile in support for the SCSI controller. + +config SCSI_CUMANA_2 + tristate "CumanaSCSI II support" + depends on ARCH_ACORN && SCSI + help + This enables support for the Cumana SCSI II card. If you have an + Acorn system with one of these, say Y. If unsure, say N. + +config SCSI_EESOXSCSI + tristate "EESOX support" + depends on ARCH_ACORN && SCSI + help + This enables support for the EESOX SCSI card. If you have an Acorn + system with one of these, say Y, otherwise say N. + +config SCSI_POWERTECSCSI + tristate "PowerTec support" + depends on ARCH_ACORN && SCSI + help + This enables support for the Powertec SCSI card on Acorn systems. If + you have one of these, say Y. If unsure, say N. + +comment "The following drivers are not fully supported" + depends on ARCH_ACORN && EXPERIMENTAL + +config SCSI_CUMANA_1 + tristate "CumanaSCSI I support (EXPERIMENTAL)" + depends on ARCH_ACORN && EXPERIMENTAL && SCSI + help + This enables support for the Cumana SCSI I card. If you have an + Acorn system with one of these, say Y. If unsure, say N. + +config SCSI_ECOSCSI + tristate "EcoScsi support (EXPERIMENTAL)" + depends on ARCH_ACORN && EXPERIMENTAL && (ARCH_ARC || ARCH_A5K) && SCSI + help + This enables support for the EcoSCSI card -- a small card that sits + in the Econet socket. If you have an Acorn system with one of these, + say Y. If unsure, say N. + +config SCSI_OAK1 + tristate "Oak SCSI support (EXPERIMENTAL)" + depends on ARCH_ACORN && EXPERIMENTAL && SCSI + help + This enables support for the Oak SCSI card. If you have an Acorn + system with one of these, say Y. If unsure, say N. + diff --git a/drivers/scsi/arm/Makefile b/drivers/scsi/arm/Makefile new file mode 100644 index 00000000000..e8db17924c1 --- /dev/null +++ b/drivers/scsi/arm/Makefile @@ -0,0 +1,14 @@ +# +# Makefile for drivers/scsi/arm +# + +acornscsi_mod-objs := acornscsi.o acornscsi-io.o + +obj-$(CONFIG_SCSI_ACORNSCSI_3) += acornscsi_mod.o queue.o msgqueue.o +obj-$(CONFIG_SCSI_ARXESCSI) += arxescsi.o fas216.o queue.o msgqueue.o +obj-$(CONFIG_SCSI_CUMANA_1) += cumana_1.o +obj-$(CONFIG_SCSI_CUMANA_2) += cumana_2.o fas216.o queue.o msgqueue.o +obj-$(CONFIG_SCSI_ECOSCSI) += ecoscsi.o +obj-$(CONFIG_SCSI_OAK1) += oak.o +obj-$(CONFIG_SCSI_POWERTECSCSI) += powertec.o fas216.o queue.o msgqueue.o +obj-$(CONFIG_SCSI_EESOXSCSI) += eesox.o fas216.o queue.o msgqueue.o diff --git a/drivers/scsi/arm/acornscsi-io.S b/drivers/scsi/arm/acornscsi-io.S new file mode 100644 index 00000000000..93467e6ac92 --- /dev/null +++ b/drivers/scsi/arm/acornscsi-io.S @@ -0,0 +1,145 @@ +/* + * linux/drivers/acorn/scsi/acornscsi-io.S: Acorn SCSI card IO + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include + +#include +#include + +#if (IO_BASE == (PCIO_BASE & 0xff000000)) +#define ADDR(off,reg) \ + tst off, $0x80000000 ;\ + mov reg, $IO_BASE ;\ + orreq reg, reg, $(PCIO_BASE & 0x00ff0000) +#else +#define ADDR(off,reg) \ + tst off, $0x80000000 ;\ + movne reg, $IO_BASE ;\ + moveq reg, $(PCIO_BASE & 0xff000000) ;\ + orreq reg, reg, $(PCIO_BASE & 0x00ff0000) +#endif + +@ Purpose: transfer a block of data from the acorn scsi card to memory +@ Proto : void acornscsi_in(unsigned int addr_start, char *buffer, int length) +@ Returns: nothing + + .align +ENTRY(__acornscsi_in) + stmfd sp!, {r4 - r7, lr} + bic r0, r0, #3 + mov lr, #0xff + orr lr, lr, #0xff00 +acornscsi_in16lp: + subs r2, r2, #16 + bmi acornscsi_in8 + ldmia r0!, {r3, r4, r5, r6} + and r3, r3, lr + orr r3, r3, r4, lsl #16 + and r4, r5, lr + orr r4, r4, r6, lsl #16 + ldmia r0!, {r5, r6, r7, ip} + and r5, r5, lr + orr r5, r5, r6, lsl #16 + and r6, r7, lr + orr r6, r6, ip, lsl #16 + stmia r1!, {r3 - r6} + bne acornscsi_in16lp + LOADREGS(fd, sp!, {r4 - r7, pc}) + +acornscsi_in8: adds r2, r2, #8 + bmi acornscsi_in4 + ldmia r0!, {r3, r4, r5, r6} + and r3, r3, lr + orr r3, r3, r4, lsl #16 + and r4, r5, lr + orr r4, r4, r6, lsl #16 + stmia r1!, {r3 - r4} + LOADREGS(eqfd, sp!, {r4 - r7, pc}) + sub r2, r2, #8 + +acornscsi_in4: adds r2, r2, #4 + bmi acornscsi_in2 + ldmia r0!, {r3, r4} + and r3, r3, lr + orr r3, r3, r4, lsl #16 + str r3, [r1], #4 + LOADREGS(eqfd, sp!, {r4 - r7, pc}) + sub r2, r2, #4 + +acornscsi_in2: adds r2, r2, #2 + ldr r3, [r0], #4 + and r3, r3, lr + strb r3, [r1], #1 + mov r3, r3, lsr #8 + strplb r3, [r1], #1 + LOADREGS(fd, sp!, {r4 - r7, pc}) + +@ Purpose: transfer a block of data from memory to the acorn scsi card +@ Proto : void acornscsi_in(unsigned int addr_start, char *buffer, int length) +@ Returns: nothing + +ENTRY(__acornscsi_out) + stmfd sp!, {r4 - r6, lr} + bic r0, r0, #3 +acornscsi_out16lp: + subs r2, r2, #16 + bmi acornscsi_out8 + ldmia r1!, {r4, r6, ip, lr} + mov r3, r4, lsl #16 + orr r3, r3, r3, lsr #16 + mov r4, r4, lsr #16 + orr r4, r4, r4, lsl #16 + mov r5, r6, lsl #16 + orr r5, r5, r5, lsr #16 + mov r6, r6, lsr #16 + orr r6, r6, r6, lsl #16 + stmia r0!, {r3, r4, r5, r6} + mov r3, ip, lsl #16 + orr r3, r3, r3, lsr #16 + mov r4, ip, lsr #16 + orr r4, r4, r4, lsl #16 + mov ip, lr, lsl #16 + orr ip, ip, ip, lsr #16 + mov lr, lr, lsr #16 + orr lr, lr, lr, lsl #16 + stmia r0!, {r3, r4, ip, lr} + bne acornscsi_out16lp + LOADREGS(fd, sp!, {r4 - r6, pc}) + +acornscsi_out8: adds r2, r2, #8 + bmi acornscsi_out4 + ldmia r1!, {r4, r6} + mov r3, r4, lsl #16 + orr r3, r3, r3, lsr #16 + mov r4, r4, lsr #16 + orr r4, r4, r4, lsl #16 + mov r5, r6, lsl #16 + orr r5, r5, r5, lsr #16 + mov r6, r6, lsr #16 + orr r6, r6, r6, lsl #16 + stmia r0!, {r3, r4, r5, r6} + LOADREGS(eqfd, sp!, {r4 - r6, pc}) + + sub r2, r2, #8 +acornscsi_out4: adds r2, r2, #4 + bmi acornscsi_out2 + ldr r4, [r1], #4 + mov r3, r4, lsl #16 + orr r3, r3, r3, lsr #16 + mov r4, r4, lsr #16 + orr r4, r4, r4, lsl #16 + stmia r0!, {r3, r4} + LOADREGS(eqfd, sp!, {r4 - r6, pc}) + + sub r2, r2, #4 +acornscsi_out2: adds r2, r2, #2 + ldr r3, [r1], #2 + strb r3, [r0], #1 + mov r3, r3, lsr #8 + strplb r3, [r0], #1 + LOADREGS(fd, sp!, {r4 - r6, pc}) + diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c new file mode 100644 index 00000000000..24dd0b890dd --- /dev/null +++ b/drivers/scsi/arm/acornscsi.c @@ -0,0 +1,3130 @@ +/* + * linux/drivers/acorn/scsi/acornscsi.c + * + * Acorn SCSI 3 driver + * By R.M.King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Abandoned using the Select and Transfer command since there were + * some nasty races between our software and the target devices that + * were not easy to solve, and the device errata had a lot of entries + * for this command, some of them quite nasty... + * + * Changelog: + * 26-Sep-1997 RMK Re-jigged to use the queue module. + * Re-coded state machine to be based on driver + * state not scsi state. Should be easier to debug. + * Added acornscsi_release to clean up properly. + * Updated proc/scsi reporting. + * 05-Oct-1997 RMK Implemented writing to SCSI devices. + * 06-Oct-1997 RMK Corrected small (non-serious) bug with the connect/ + * reconnect race condition causing a warning message. + * 12-Oct-1997 RMK Added catch for re-entering interrupt routine. + * 15-Oct-1997 RMK Improved handling of commands. + * 27-Jun-1998 RMK Changed asm/delay.h to linux/delay.h. + * 13-Dec-1998 RMK Better abort code and command handling. Extra state + * transitions added to allow dodgy devices to work. + */ +#define DEBUG_NO_WRITE 1 +#define DEBUG_QUEUES 2 +#define DEBUG_DMA 4 +#define DEBUG_ABORT 8 +#define DEBUG_DISCON 16 +#define DEBUG_CONNECT 32 +#define DEBUG_PHASES 64 +#define DEBUG_WRITE 128 +#define DEBUG_LINK 256 +#define DEBUG_MESSAGES 512 +#define DEBUG_RESET 1024 +#define DEBUG_ALL (DEBUG_RESET|DEBUG_MESSAGES|DEBUG_LINK|DEBUG_WRITE|\ + DEBUG_PHASES|DEBUG_CONNECT|DEBUG_DISCON|DEBUG_ABORT|\ + DEBUG_DMA|DEBUG_QUEUES) + +/* DRIVER CONFIGURATION + * + * SCSI-II Tagged queue support. + * + * I don't have any SCSI devices that support it, so it is totally untested + * (except to make sure that it doesn't interfere with any non-tagging + * devices). It is not fully implemented either - what happens when a + * tagging device reconnects??? + * + * You can tell if you have a device that supports tagged queueing my + * cating (eg) /proc/scsi/acornscsi/0 and see if the SCSI revision is reported + * as '2 TAG'. + * + * Also note that CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE is normally set in the config + * scripts, but disabled here. Once debugged, remove the #undef, otherwise to debug, + * comment out the undef. + */ +#undef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE +/* + * SCSI-II Linked command support. + * + * The higher level code doesn't support linked commands yet, and so the option + * is undef'd here. + */ +#undef CONFIG_SCSI_ACORNSCSI_LINK +/* + * SCSI-II Synchronous transfer support. + * + * Tried and tested... + * + * SDTR_SIZE - maximum number of un-acknowledged bytes (0 = off, 12 = max) + * SDTR_PERIOD - period of REQ signal (min=125, max=1020) + * DEFAULT_PERIOD - default REQ period. + */ +#define SDTR_SIZE 12 +#define SDTR_PERIOD 125 +#define DEFAULT_PERIOD 500 + +/* + * Debugging information + * + * DEBUG - bit mask from list above + * DEBUG_TARGET - is defined to the target number if you want to debug + * a specific target. [only recon/write/dma]. + */ +#define DEBUG (DEBUG_RESET|DEBUG_WRITE|DEBUG_NO_WRITE) +/* only allow writing to SCSI device 0 */ +#define NO_WRITE 0xFE +/*#define DEBUG_TARGET 2*/ +/* + * Select timeout time (in 10ms units) + * + * This is the timeout used between the start of selection and the WD33C93 + * chip deciding that the device isn't responding. + */ +#define TIMEOUT_TIME 10 +/* + * Define this if you want to have verbose explaination of SCSI + * status/messages. + */ +#undef CONFIG_ACORNSCSI_CONSTANTS +/* + * Define this if you want to use the on board DMAC [don't remove this option] + * If not set, then use PIO mode (not currently supported). + */ +#define USE_DMAC + +/* + * ==================================================================================== + */ + +#ifdef DEBUG_TARGET +#define DBG(cmd,xxx...) \ + if (cmd->device->id == DEBUG_TARGET) { \ + xxx; \ + } +#else +#define DBG(cmd,xxx...) xxx +#endif + +#ifndef STRINGIFY +#define STRINGIFY(x) #x +#endif +#define STRx(x) STRINGIFY(x) +#define NO_WRITE_STR STRx(NO_WRITE) + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "../scsi.h" +#include +#include "acornscsi.h" +#include "msgqueue.h" +#include "scsi.h" + +#include + +#define VER_MAJOR 2 +#define VER_MINOR 0 +#define VER_PATCH 6 + +#ifndef ABORT_TAG +#define ABORT_TAG 0xd +#else +#error "Yippee! ABORT TAG is now defined! Remove this error!" +#endif + +#ifdef CONFIG_SCSI_ACORNSCSI_LINK +#error SCSI2 LINKed commands not supported (yet)! +#endif + +#ifdef USE_DMAC +/* + * DMAC setup parameters + */ +#define INIT_DEVCON0 (DEVCON0_RQL|DEVCON0_EXW|DEVCON0_CMP) +#define INIT_DEVCON1 (DEVCON1_BHLD) +#define DMAC_READ (MODECON_READ) +#define DMAC_WRITE (MODECON_WRITE) +#define INIT_SBICDMA (CTRL_DMABURST) + +#define scsi_xferred have_data_in + +/* + * Size of on-board DMA buffer + */ +#define DMAC_BUFFER_SIZE 65536 +#endif + +#define STATUS_BUFFER_TO_PRINT 24 + +unsigned int sdtr_period = SDTR_PERIOD; +unsigned int sdtr_size = SDTR_SIZE; + +static void acornscsi_done(AS_Host *host, Scsi_Cmnd **SCpntp, unsigned int result); +static int acornscsi_reconnect_finish(AS_Host *host); +static void acornscsi_dma_cleanup(AS_Host *host); +static void acornscsi_abortcmd(AS_Host *host, unsigned char tag); + +/* ==================================================================================== + * Miscellaneous + */ + +static inline void +sbic_arm_write(unsigned int io_port, int reg, int value) +{ + __raw_writeb(reg, io_port); + __raw_writeb(value, io_port + 4); +} + +#define sbic_arm_writenext(io,val) \ + __raw_writeb((val), (io) + 4) + +static inline +int sbic_arm_read(unsigned int io_port, int reg) +{ + if(reg == SBIC_ASR) + return __raw_readl(io_port) & 255; + __raw_writeb(reg, io_port); + return __raw_readl(io_port + 4) & 255; +} + +#define sbic_arm_readnext(io) \ + __raw_readb((io) + 4) + +#ifdef USE_DMAC +#define dmac_read(io_port,reg) \ + inb((io_port) + (reg)) + +#define dmac_write(io_port,reg,value) \ + ({ outb((value), (io_port) + (reg)); }) + +#define dmac_clearintr(io_port) \ + ({ outb(0, (io_port)); }) + +static inline +unsigned int dmac_address(unsigned int io_port) +{ + return dmac_read(io_port, DMAC_TXADRHI) << 16 | + dmac_read(io_port, DMAC_TXADRMD) << 8 | + dmac_read(io_port, DMAC_TXADRLO); +} + +static +void acornscsi_dumpdma(AS_Host *host, char *where) +{ + unsigned int mode, addr, len; + + mode = dmac_read(host->dma.io_port, DMAC_MODECON); + addr = dmac_address(host->dma.io_port); + len = dmac_read(host->dma.io_port, DMAC_TXCNTHI) << 8 | + dmac_read(host->dma.io_port, DMAC_TXCNTLO); + + printk("scsi%d: %s: DMAC %02x @%06x+%04x msk %02x, ", + host->host->host_no, where, + mode, addr, (len + 1) & 0xffff, + dmac_read(host->dma.io_port, DMAC_MASKREG)); + + printk("DMA @%06x, ", host->dma.start_addr); + printk("BH @%p +%04x, ", host->scsi.SCp.ptr, + host->scsi.SCp.this_residual); + printk("DT @+%04x ST @+%04x", host->dma.transferred, + host->scsi.SCp.scsi_xferred); + printk("\n"); +} +#endif + +static +unsigned long acornscsi_sbic_xfcount(AS_Host *host) +{ + unsigned long length; + + length = sbic_arm_read(host->scsi.io_port, SBIC_TRANSCNTH) << 16; + length |= sbic_arm_readnext(host->scsi.io_port) << 8; + length |= sbic_arm_readnext(host->scsi.io_port); + + return length; +} + +static int +acornscsi_sbic_wait(AS_Host *host, int stat_mask, int stat, int timeout, char *msg) +{ + int asr; + + do { + asr = sbic_arm_read(host->scsi.io_port, SBIC_ASR); + + if ((asr & stat_mask) == stat) + return 0; + + udelay(1); + } while (--timeout); + + printk("scsi%d: timeout while %s\n", host->host->host_no, msg); + + return -1; +} + +static +int acornscsi_sbic_issuecmd(AS_Host *host, int command) +{ + if (acornscsi_sbic_wait(host, ASR_CIP, 0, 1000, "issuing command")) + return -1; + + sbic_arm_write(host->scsi.io_port, SBIC_CMND, command); + + return 0; +} + +static void +acornscsi_csdelay(unsigned int cs) +{ + unsigned long target_jiffies, flags; + + target_jiffies = jiffies + 1 + cs * HZ / 100; + + local_save_flags(flags); + local_irq_enable(); + + while (time_before(jiffies, target_jiffies)) barrier(); + + local_irq_restore(flags); +} + +static +void acornscsi_resetcard(AS_Host *host) +{ + unsigned int i, timeout; + + /* assert reset line */ + host->card.page_reg = 0x80; + outb(host->card.page_reg, host->card.io_page); + + /* wait 3 cs. SCSI standard says 25ms. */ + acornscsi_csdelay(3); + + host->card.page_reg = 0; + outb(host->card.page_reg, host->card.io_page); + + /* + * Should get a reset from the card + */ + timeout = 1000; + do { + if (inb(host->card.io_intr) & 8) + break; + udelay(1); + } while (--timeout); + + if (timeout == 0) + printk("scsi%d: timeout while resetting card\n", + host->host->host_no); + + sbic_arm_read(host->scsi.io_port, SBIC_ASR); + sbic_arm_read(host->scsi.io_port, SBIC_SSR); + + /* setup sbic - WD33C93A */ + sbic_arm_write(host->scsi.io_port, SBIC_OWNID, OWNID_EAF | host->host->this_id); + sbic_arm_write(host->scsi.io_port, SBIC_CMND, CMND_RESET); + + /* + * Command should cause a reset interrupt + */ + timeout = 1000; + do { + if (inb(host->card.io_intr) & 8) + break; + udelay(1); + } while (--timeout); + + if (timeout == 0) + printk("scsi%d: timeout while resetting card\n", + host->host->host_no); + + sbic_arm_read(host->scsi.io_port, SBIC_ASR); + if (sbic_arm_read(host->scsi.io_port, SBIC_SSR) != 0x01) + printk(KERN_CRIT "scsi%d: WD33C93A didn't give enhanced reset interrupt\n", + host->host->host_no); + + sbic_arm_write(host->scsi.io_port, SBIC_CTRL, INIT_SBICDMA | CTRL_IDI); + sbic_arm_write(host->scsi.io_port, SBIC_TIMEOUT, TIMEOUT_TIME); + sbic_arm_write(host->scsi.io_port, SBIC_SYNCHTRANSFER, SYNCHTRANSFER_2DBA); + sbic_arm_write(host->scsi.io_port, SBIC_SOURCEID, SOURCEID_ER | SOURCEID_DSP); + + host->card.page_reg = 0x40; + outb(host->card.page_reg, host->card.io_page); + + /* setup dmac - uPC71071 */ + dmac_write(host->dma.io_port, DMAC_INIT, 0); +#ifdef USE_DMAC + dmac_write(host->dma.io_port, DMAC_INIT, INIT_8BIT); + dmac_write(host->dma.io_port, DMAC_CHANNEL, CHANNEL_0); + dmac_write(host->dma.io_port, DMAC_DEVCON0, INIT_DEVCON0); + dmac_write(host->dma.io_port, DMAC_DEVCON1, INIT_DEVCON1); +#endif + + host->SCpnt = NULL; + host->scsi.phase = PHASE_IDLE; + host->scsi.disconnectable = 0; + + memset(host->busyluns, 0, sizeof(host->busyluns)); + + for (i = 0; i < 8; i++) { + host->device[i].sync_state = SYNC_NEGOCIATE; + host->device[i].disconnect_ok = 1; + } + + /* wait 25 cs. SCSI standard says 250ms. */ + acornscsi_csdelay(25); +} + +/*============================================================================================= + * Utility routines (eg. debug) + */ +#ifdef CONFIG_ACORNSCSI_CONSTANTS +static char *acornscsi_interrupttype[] = { + "rst", "suc", "p/a", "3", + "term", "5", "6", "7", + "serv", "9", "a", "b", + "c", "d", "e", "f" +}; + +static signed char acornscsi_map[] = { + 0, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, 2, -1, -1, -1, -1, 3, -1, 4, 5, 6, 7, 8, 9, 10, 11, + 12, 13, 14, -1, -1, -1, -1, -1, 4, 5, 6, 7, 8, 9, 10, 11, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + 15, 16, 17, 18, 19, -1, -1, 20, 4, 5, 6, 7, 8, 9, 10, 11, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + 21, 22, -1, -1, -1, 23, -1, -1, 4, 5, 6, 7, 8, 9, 10, 11, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 +}; + +static char *acornscsi_interruptcode[] = { + /* 0 */ + "reset - normal mode", /* 00 */ + "reset - advanced mode", /* 01 */ + + /* 2 */ + "sel", /* 11 */ + "sel+xfer", /* 16 */ + "data-out", /* 18 */ + "data-in", /* 19 */ + "cmd", /* 1A */ + "stat", /* 1B */ + "??-out", /* 1C */ + "??-in", /* 1D */ + "msg-out", /* 1E */ + "msg-in", /* 1F */ + + /* 12 */ + "/ACK asserted", /* 20 */ + "save-data-ptr", /* 21 */ + "{re}sel", /* 22 */ + + /* 15 */ + "inv cmd", /* 40 */ + "unexpected disconnect", /* 41 */ + "sel timeout", /* 42 */ + "P err", /* 43 */ + "P err+ATN", /* 44 */ + "bad status byte", /* 47 */ + + /* 21 */ + "resel, no id", /* 80 */ + "resel", /* 81 */ + "discon", /* 85 */ +}; + +static +void print_scsi_status(unsigned int ssr) +{ + if (acornscsi_map[ssr] != -1) + printk("%s:%s", + acornscsi_interrupttype[(ssr >> 4)], + acornscsi_interruptcode[acornscsi_map[ssr]]); + else + printk("%X:%X", ssr >> 4, ssr & 0x0f); +} +#endif + +static +void print_sbic_status(int asr, int ssr, int cmdphase) +{ +#ifdef CONFIG_ACORNSCSI_CONSTANTS + printk("sbic: %c%c%c%c%c%c ", + asr & ASR_INT ? 'I' : 'i', + asr & ASR_LCI ? 'L' : 'l', + asr & ASR_BSY ? 'B' : 'b', + asr & ASR_CIP ? 'C' : 'c', + asr & ASR_PE ? 'P' : 'p', + asr & ASR_DBR ? 'D' : 'd'); + printk("scsi: "); + print_scsi_status(ssr); + printk(" ph %02X\n", cmdphase); +#else + printk("sbic: %02X scsi: %X:%X ph: %02X\n", + asr, (ssr & 0xf0)>>4, ssr & 0x0f, cmdphase); +#endif +} + +static void +acornscsi_dumplogline(AS_Host *host, int target, int line) +{ + unsigned long prev; + signed int ptr; + + ptr = host->status_ptr[target] - STATUS_BUFFER_TO_PRINT; + if (ptr < 0) + ptr += STATUS_BUFFER_SIZE; + + printk("%c: %3s:", target == 8 ? 'H' : '0' + target, + line == 0 ? "ph" : line == 1 ? "ssr" : "int"); + + prev = host->status[target][ptr].when; + + for (; ptr != host->status_ptr[target]; ptr = (ptr + 1) & (STATUS_BUFFER_SIZE - 1)) { + unsigned long time_diff; + + if (!host->status[target][ptr].when) + continue; + + switch (line) { + case 0: + printk("%c%02X", host->status[target][ptr].irq ? '-' : ' ', + host->status[target][ptr].ph); + break; + + case 1: + printk(" %02X", host->status[target][ptr].ssr); + break; + + case 2: + time_diff = host->status[target][ptr].when - prev; + prev = host->status[target][ptr].when; + if (time_diff == 0) + printk("==^"); + else if (time_diff >= 100) + printk(" "); + else + printk(" %02ld", time_diff); + break; + } + } + + printk("\n"); +} + +static +void acornscsi_dumplog(AS_Host *host, int target) +{ + do { + acornscsi_dumplogline(host, target, 0); + acornscsi_dumplogline(host, target, 1); + acornscsi_dumplogline(host, target, 2); + + if (target == 8) + break; + + target = 8; + } while (1); +} + +static +char acornscsi_target(AS_Host *host) +{ + if (host->SCpnt) + return '0' + host->SCpnt->device->id; + return 'H'; +} + +/* + * Prototype: cmdtype_t acornscsi_cmdtype(int command) + * Purpose : differentiate READ from WRITE from other commands + * Params : command - command to interpret + * Returns : CMD_READ - command reads data, + * CMD_WRITE - command writes data, + * CMD_MISC - everything else + */ +static inline +cmdtype_t acornscsi_cmdtype(int command) +{ + switch (command) { + case WRITE_6: case WRITE_10: case WRITE_12: + return CMD_WRITE; + case READ_6: case READ_10: case READ_12: + return CMD_READ; + default: + return CMD_MISC; + } +} + +/* + * Prototype: int acornscsi_datadirection(int command) + * Purpose : differentiate between commands that have a DATA IN phase + * and a DATA OUT phase + * Params : command - command to interpret + * Returns : DATADIR_OUT - data out phase expected + * DATADIR_IN - data in phase expected + */ +static +datadir_t acornscsi_datadirection(int command) +{ + switch (command) { + case CHANGE_DEFINITION: case COMPARE: case COPY: + case COPY_VERIFY: case LOG_SELECT: case MODE_SELECT: + case MODE_SELECT_10: case SEND_DIAGNOSTIC: case WRITE_BUFFER: + case FORMAT_UNIT: case REASSIGN_BLOCKS: case RESERVE: + case SEARCH_EQUAL: case SEARCH_HIGH: case SEARCH_LOW: + case WRITE_6: case WRITE_10: case WRITE_VERIFY: + case UPDATE_BLOCK: case WRITE_LONG: case WRITE_SAME: + case SEARCH_HIGH_12: case SEARCH_EQUAL_12: case SEARCH_LOW_12: + case WRITE_12: case WRITE_VERIFY_12: case SET_WINDOW: + case MEDIUM_SCAN: case SEND_VOLUME_TAG: case 0xea: + return DATADIR_OUT; + default: + return DATADIR_IN; + } +} + +/* + * Purpose : provide values for synchronous transfers with 33C93. + * Copyright: Copyright (c) 1996 John Shifflett, GeoLog Consulting + * Modified by Russell King for 8MHz WD33C93A + */ +static struct sync_xfer_tbl { + unsigned int period_ns; + unsigned char reg_value; +} sync_xfer_table[] = { + { 1, 0x20 }, { 249, 0x20 }, { 374, 0x30 }, + { 499, 0x40 }, { 624, 0x50 }, { 749, 0x60 }, + { 874, 0x70 }, { 999, 0x00 }, { 0, 0 } +}; + +/* + * Prototype: int acornscsi_getperiod(unsigned char syncxfer) + * Purpose : period for the synchronous transfer setting + * Params : syncxfer SYNCXFER register value + * Returns : period in ns. + */ +static +int acornscsi_getperiod(unsigned char syncxfer) +{ + int i; + + syncxfer &= 0xf0; + if (syncxfer == 0x10) + syncxfer = 0; + + for (i = 1; sync_xfer_table[i].period_ns; i++) + if (syncxfer == sync_xfer_table[i].reg_value) + return sync_xfer_table[i].period_ns; + return 0; +} + +/* + * Prototype: int round_period(unsigned int period) + * Purpose : return index into above table for a required REQ period + * Params : period - time (ns) for REQ + * Returns : table index + * Copyright: Copyright (c) 1996 John Shifflett, GeoLog Consulting + */ +static inline +int round_period(unsigned int period) +{ + int i; + + for (i = 1; sync_xfer_table[i].period_ns; i++) { + if ((period <= sync_xfer_table[i].period_ns) && + (period > sync_xfer_table[i - 1].period_ns)) + return i; + } + return 7; +} + +/* + * Prototype: unsigned char calc_sync_xfer(unsigned int period, unsigned int offset) + * Purpose : calculate value for 33c93s SYNC register + * Params : period - time (ns) for REQ + * offset - offset in bytes between REQ/ACK + * Returns : value for SYNC register + * Copyright: Copyright (c) 1996 John Shifflett, GeoLog Consulting + */ +static +unsigned char calc_sync_xfer(unsigned int period, unsigned int offset) +{ + return sync_xfer_table[round_period(period)].reg_value | + ((offset < SDTR_SIZE) ? offset : SDTR_SIZE); +} + +/* ==================================================================================== + * Command functions + */ +/* + * Function: acornscsi_kick(AS_Host *host) + * Purpose : kick next command to interface + * Params : host - host to send command to + * Returns : INTR_IDLE if idle, otherwise INTR_PROCESSING + * Notes : interrupts are always disabled! + */ +static +intr_ret_t acornscsi_kick(AS_Host *host) +{ + int from_queue = 0; + Scsi_Cmnd *SCpnt; + + /* first check to see if a command is waiting to be executed */ + SCpnt = host->origSCpnt; + host->origSCpnt = NULL; + + /* retrieve next command */ + if (!SCpnt) { + SCpnt = queue_remove_exclude(&host->queues.issue, host->busyluns); + if (!SCpnt) + return INTR_IDLE; + + from_queue = 1; + } + + if (host->scsi.disconnectable && host->SCpnt) { + queue_add_cmd_tail(&host->queues.disconnected, host->SCpnt); + host->scsi.disconnectable = 0; +#if (DEBUG & (DEBUG_QUEUES|DEBUG_DISCON)) + DBG(host->SCpnt, printk("scsi%d.%c: moved command to disconnected queue\n", + host->host->host_no, acornscsi_target(host))); +#endif + host->SCpnt = NULL; + } + + /* + * If we have an interrupt pending, then we may have been reselected. + * In this case, we don't want to write to the registers + */ + if (!(sbic_arm_read(host->scsi.io_port, SBIC_ASR) & (ASR_INT|ASR_BSY|ASR_CIP))) { + sbic_arm_write(host->scsi.io_port, SBIC_DESTID, SCpnt->device->id); + sbic_arm_write(host->scsi.io_port, SBIC_CMND, CMND_SELWITHATN); + } + + /* + * claim host busy - all of these must happen atomically wrt + * our interrupt routine. Failure means command loss. + */ + host->scsi.phase = PHASE_CONNECTING; + host->SCpnt = SCpnt; + host->scsi.SCp = SCpnt->SCp; + host->dma.xfer_setup = 0; + host->dma.xfer_required = 0; + host->dma.xfer_done = 0; + +#if (DEBUG & (DEBUG_ABORT|DEBUG_CONNECT)) + DBG(SCpnt,printk("scsi%d.%c: starting cmd %02X\n", + host->host->host_no, '0' + SCpnt->device->id, + SCpnt->cmnd[0])); +#endif + + if (from_queue) { +#ifdef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE + /* + * tagged queueing - allocate a new tag to this command + */ + if (SCpnt->device->simple_tags) { + SCpnt->device->current_tag += 1; + if (SCpnt->device->current_tag == 0) + SCpnt->device->current_tag = 1; + SCpnt->tag = SCpnt->device->current_tag; + } else +#endif + set_bit(SCpnt->device->id * 8 + SCpnt->device->lun, host->busyluns); + + host->stats.removes += 1; + + switch (acornscsi_cmdtype(SCpnt->cmnd[0])) { + case CMD_WRITE: + host->stats.writes += 1; + break; + case CMD_READ: + host->stats.reads += 1; + break; + case CMD_MISC: + host->stats.miscs += 1; + break; + } + } + + return INTR_PROCESSING; +} + +/* + * Function: void acornscsi_done(AS_Host *host, Scsi_Cmnd **SCpntp, unsigned int result) + * Purpose : complete processing for command + * Params : host - interface that completed + * result - driver byte of result + */ +static +void acornscsi_done(AS_Host *host, Scsi_Cmnd **SCpntp, unsigned int result) +{ + Scsi_Cmnd *SCpnt = *SCpntp; + + /* clean up */ + sbic_arm_write(host->scsi.io_port, SBIC_SOURCEID, SOURCEID_ER | SOURCEID_DSP); + + host->stats.fins += 1; + + if (SCpnt) { + *SCpntp = NULL; + + acornscsi_dma_cleanup(host); + + SCpnt->result = result << 16 | host->scsi.SCp.Message << 8 | host->scsi.SCp.Status; + + /* + * In theory, this should not happen. In practice, it seems to. + * Only trigger an error if the device attempts to report all happy + * but with untransferred buffers... If we don't do something, then + * data loss will occur. Should we check SCpnt->underflow here? + * It doesn't appear to be set to something meaningful by the higher + * levels all the time. + */ + if (result == DID_OK) { + int xfer_warn = 0; + + if (SCpnt->underflow == 0) { + if (host->scsi.SCp.ptr && + acornscsi_cmdtype(SCpnt->cmnd[0]) != CMD_MISC) + xfer_warn = 1; + } else { + if (host->scsi.SCp.scsi_xferred < SCpnt->underflow || + host->scsi.SCp.scsi_xferred != host->dma.transferred) + xfer_warn = 1; + } + + /* ANSI standard says: (SCSI-2 Rev 10c Sect 5.6.6) + * Targets which break data transfers into multiple + * connections shall end each successful connection + * (except possibly the last) with a SAVE DATA + * POINTER - DISCONNECT message sequence. + * + * This makes it difficult to ensure that a transfer has + * completed. If we reach the end of a transfer during + * the command, then we can only have finished the transfer. + * therefore, if we seem to have some data remaining, this + * is not a problem. + */ + if (host->dma.xfer_done) + xfer_warn = 0; + + if (xfer_warn) { + switch (status_byte(SCpnt->result)) { + case CHECK_CONDITION: + case COMMAND_TERMINATED: + case BUSY: + case QUEUE_FULL: + case RESERVATION_CONFLICT: + break; + + default: + printk(KERN_ERR "scsi%d.H: incomplete data transfer detected: result=%08X command=", + host->host->host_no, SCpnt->result); + print_command(SCpnt->cmnd); + acornscsi_dumpdma(host, "done"); + acornscsi_dumplog(host, SCpnt->device->id); + SCpnt->result &= 0xffff; + SCpnt->result |= DID_ERROR << 16; + } + } + } + + if (!SCpnt->scsi_done) + panic("scsi%d.H: null scsi_done function in acornscsi_done", host->host->host_no); + + clear_bit(SCpnt->device->id * 8 + SCpnt->device->lun, host->busyluns); + + SCpnt->scsi_done(SCpnt); + } else + printk("scsi%d: null command in acornscsi_done", host->host->host_no); + + host->scsi.phase = PHASE_IDLE; +} + +/* ==================================================================================== + * DMA routines + */ +/* + * Purpose : update SCSI Data Pointer + * Notes : this will only be one SG entry or less + */ +static +void acornscsi_data_updateptr(AS_Host *host, Scsi_Pointer *SCp, unsigned int length) +{ + SCp->ptr += length; + SCp->this_residual -= length; + + if (SCp->this_residual == 0 && next_SCp(SCp) == 0) + host->dma.xfer_done = 1; +} + +/* + * Prototype: void acornscsi_data_read(AS_Host *host, char *ptr, + * unsigned int start_addr, unsigned int length) + * Purpose : read data from DMA RAM + * Params : host - host to transfer from + * ptr - DRAM address + * start_addr - host mem address + * length - number of bytes to transfer + * Notes : this will only be one SG entry or less + */ +static +void acornscsi_data_read(AS_Host *host, char *ptr, + unsigned int start_addr, unsigned int length) +{ + extern void __acornscsi_in(int port, char *buf, int len); + unsigned int page, offset, len = length; + + page = (start_addr >> 12); + offset = start_addr & ((1 << 12) - 1); + + outb((page & 0x3f) | host->card.page_reg, host->card.io_page); + + while (len > 0) { + unsigned int this_len; + + if (len + offset > (1 << 12)) + this_len = (1 << 12) - offset; + else + this_len = len; + + __acornscsi_in(host->card.io_ram + (offset << 1), ptr, this_len); + + offset += this_len; + ptr += this_len; + len -= this_len; + + if (offset == (1 << 12)) { + offset = 0; + page ++; + outb((page & 0x3f) | host->card.page_reg, host->card.io_page); + } + } + outb(host->card.page_reg, host->card.io_page); +} + +/* + * Prototype: void acornscsi_data_write(AS_Host *host, char *ptr, + * unsigned int start_addr, unsigned int length) + * Purpose : write data to DMA RAM + * Params : host - host to transfer from + * ptr - DRAM address + * start_addr - host mem address + * length - number of bytes to transfer + * Notes : this will only be one SG entry or less + */ +static +void acornscsi_data_write(AS_Host *host, char *ptr, + unsigned int start_addr, unsigned int length) +{ + extern void __acornscsi_out(int port, char *buf, int len); + unsigned int page, offset, len = length; + + page = (start_addr >> 12); + offset = start_addr & ((1 << 12) - 1); + + outb((page & 0x3f) | host->card.page_reg, host->card.io_page); + + while (len > 0) { + unsigned int this_len; + + if (len + offset > (1 << 12)) + this_len = (1 << 12) - offset; + else + this_len = len; + + __acornscsi_out(host->card.io_ram + (offset << 1), ptr, this_len); + + offset += this_len; + ptr += this_len; + len -= this_len; + + if (offset == (1 << 12)) { + offset = 0; + page ++; + outb((page & 0x3f) | host->card.page_reg, host->card.io_page); + } + } + outb(host->card.page_reg, host->card.io_page); +} + +/* ========================================================================================= + * On-board DMA routines + */ +#ifdef USE_DMAC +/* + * Prototype: void acornscsi_dmastop(AS_Host *host) + * Purpose : stop all DMA + * Params : host - host on which to stop DMA + * Notes : This is called when leaving DATA IN/OUT phase, + * or when interface is RESET + */ +static inline +void acornscsi_dma_stop(AS_Host *host) +{ + dmac_write(host->dma.io_port, DMAC_MASKREG, MASK_ON); + dmac_clearintr(host->dma.io_intr_clear); + +#if (DEBUG & DEBUG_DMA) + DBG(host->SCpnt, acornscsi_dumpdma(host, "stop")); +#endif +} + +/* + * Function: void acornscsi_dma_setup(AS_Host *host, dmadir_t direction) + * Purpose : setup DMA controller for data transfer + * Params : host - host to setup + * direction - data transfer direction + * Notes : This is called when entering DATA I/O phase, not + * while we're in a DATA I/O phase + */ +static +void acornscsi_dma_setup(AS_Host *host, dmadir_t direction) +{ + unsigned int address, length, mode; + + host->dma.direction = direction; + + dmac_write(host->dma.io_port, DMAC_MASKREG, MASK_ON); + + if (direction == DMA_OUT) { +#if (DEBUG & DEBUG_NO_WRITE) + if (NO_WRITE & (1 << host->SCpnt->device->id)) { + printk(KERN_CRIT "scsi%d.%c: I can't handle DMA_OUT!\n", + host->host->host_no, acornscsi_target(host)); + return; + } +#endif + mode = DMAC_WRITE; + } else + mode = DMAC_READ; + + /* + * Allocate some buffer space, limited to half the buffer size + */ + length = min_t(unsigned int, host->scsi.SCp.this_residual, DMAC_BUFFER_SIZE / 2); + if (length) { + host->dma.start_addr = address = host->dma.free_addr; + host->dma.free_addr = (host->dma.free_addr + length) & + (DMAC_BUFFER_SIZE - 1); + + /* + * Transfer data to DMA memory + */ + if (direction == DMA_OUT) + acornscsi_data_write(host, host->scsi.SCp.ptr, host->dma.start_addr, + length); + + length -= 1; + dmac_write(host->dma.io_port, DMAC_TXCNTLO, length); + dmac_write(host->dma.io_port, DMAC_TXCNTHI, length >> 8); + dmac_write(host->dma.io_port, DMAC_TXADRLO, address); + dmac_write(host->dma.io_port, DMAC_TXADRMD, address >> 8); + dmac_write(host->dma.io_port, DMAC_TXADRHI, 0); + dmac_write(host->dma.io_port, DMAC_MODECON, mode); + dmac_write(host->dma.io_port, DMAC_MASKREG, MASK_OFF); + +#if (DEBUG & DEBUG_DMA) + DBG(host->SCpnt, acornscsi_dumpdma(host, "strt")); +#endif + host->dma.xfer_setup = 1; + } +} + +/* + * Function: void acornscsi_dma_cleanup(AS_Host *host) + * Purpose : ensure that all DMA transfers are up-to-date & host->scsi.SCp is correct + * Params : host - host to finish + * Notes : This is called when a command is: + * terminating, RESTORE_POINTERS, SAVE_POINTERS, DISCONECT + * : This must not return until all transfers are completed. + */ +static +void acornscsi_dma_cleanup(AS_Host *host) +{ + dmac_write(host->dma.io_port, DMAC_MASKREG, MASK_ON); + dmac_clearintr(host->dma.io_intr_clear); + + /* + * Check for a pending transfer + */ + if (host->dma.xfer_required) { + host->dma.xfer_required = 0; + if (host->dma.direction == DMA_IN) + acornscsi_data_read(host, host->dma.xfer_ptr, + host->dma.xfer_start, host->dma.xfer_length); + } + + /* + * Has a transfer been setup? + */ + if (host->dma.xfer_setup) { + unsigned int transferred; + + host->dma.xfer_setup = 0; + +#if (DEBUG & DEBUG_DMA) + DBG(host->SCpnt, acornscsi_dumpdma(host, "cupi")); +#endif + + /* + * Calculate number of bytes transferred from DMA. + */ + transferred = dmac_address(host->dma.io_port) - host->dma.start_addr; + host->dma.transferred += transferred; + + if (host->dma.direction == DMA_IN) + acornscsi_data_read(host, host->scsi.SCp.ptr, + host->dma.start_addr, transferred); + + /* + * Update SCSI pointers + */ + acornscsi_data_updateptr(host, &host->scsi.SCp, transferred); +#if (DEBUG & DEBUG_DMA) + DBG(host->SCpnt, acornscsi_dumpdma(host, "cupo")); +#endif + } +} + +/* + * Function: void acornscsi_dmacintr(AS_Host *host) + * Purpose : handle interrupts from DMAC device + * Params : host - host to process + * Notes : If reading, we schedule the read to main memory & + * allow the transfer to continue. + * : If writing, we fill the onboard DMA memory from main + * memory. + * : Called whenever DMAC finished it's current transfer. + */ +static +void acornscsi_dma_intr(AS_Host *host) +{ + unsigned int address, length, transferred; + +#if (DEBUG & DEBUG_DMA) + DBG(host->SCpnt, acornscsi_dumpdma(host, "inti")); +#endif + + dmac_write(host->dma.io_port, DMAC_MASKREG, MASK_ON); + dmac_clearintr(host->dma.io_intr_clear); + + /* + * Calculate amount transferred via DMA + */ + transferred = dmac_address(host->dma.io_port) - host->dma.start_addr; + host->dma.transferred += transferred; + + /* + * Schedule DMA transfer off board + */ + if (host->dma.direction == DMA_IN) { + host->dma.xfer_start = host->dma.start_addr; + host->dma.xfer_length = transferred; + host->dma.xfer_ptr = host->scsi.SCp.ptr; + host->dma.xfer_required = 1; + } + + acornscsi_data_updateptr(host, &host->scsi.SCp, transferred); + + /* + * Allocate some buffer space, limited to half the on-board RAM size + */ + length = min_t(unsigned int, host->scsi.SCp.this_residual, DMAC_BUFFER_SIZE / 2); + if (length) { + host->dma.start_addr = address = host->dma.free_addr; + host->dma.free_addr = (host->dma.free_addr + length) & + (DMAC_BUFFER_SIZE - 1); + + /* + * Transfer data to DMA memory + */ + if (host->dma.direction == DMA_OUT) + acornscsi_data_write(host, host->scsi.SCp.ptr, host->dma.start_addr, + length); + + length -= 1; + dmac_write(host->dma.io_port, DMAC_TXCNTLO, length); + dmac_write(host->dma.io_port, DMAC_TXCNTHI, length >> 8); + dmac_write(host->dma.io_port, DMAC_TXADRLO, address); + dmac_write(host->dma.io_port, DMAC_TXADRMD, address >> 8); + dmac_write(host->dma.io_port, DMAC_TXADRHI, 0); + dmac_write(host->dma.io_port, DMAC_MASKREG, MASK_OFF); + +#if (DEBUG & DEBUG_DMA) + DBG(host->SCpnt, acornscsi_dumpdma(host, "into")); +#endif + } else { + host->dma.xfer_setup = 0; +#if 0 + /* + * If the interface still wants more, then this is an error. + * We give it another byte, but we also attempt to raise an + * attention condition. We continue giving one byte until + * the device recognises the attention. + */ + if (dmac_read(host->dma.io_port, DMAC_STATUS) & STATUS_RQ0) { + acornscsi_abortcmd(host, host->SCpnt->tag); + + dmac_write(host->dma.io_port, DMAC_TXCNTLO, 0); + dmac_write(host->dma.io_port, DMAC_TXCNTHI, 0); + dmac_write(host->dma.io_port, DMAC_TXADRLO, 0); + dmac_write(host->dma.io_port, DMAC_TXADRMD, 0); + dmac_write(host->dma.io_port, DMAC_TXADRHI, 0); + dmac_write(host->dma.io_port, DMAC_MASKREG, MASK_OFF); + } +#endif + } +} + +/* + * Function: void acornscsi_dma_xfer(AS_Host *host) + * Purpose : transfer data between AcornSCSI and memory + * Params : host - host to process + */ +static +void acornscsi_dma_xfer(AS_Host *host) +{ + host->dma.xfer_required = 0; + + if (host->dma.direction == DMA_IN) + acornscsi_data_read(host, host->dma.xfer_ptr, + host->dma.xfer_start, host->dma.xfer_length); +} + +/* + * Function: void acornscsi_dma_adjust(AS_Host *host) + * Purpose : adjust DMA pointers & count for bytes transferred to + * SBIC but not SCSI bus. + * Params : host - host to adjust DMA count for + */ +static +void acornscsi_dma_adjust(AS_Host *host) +{ + if (host->dma.xfer_setup) { + signed long transferred; +#if (DEBUG & (DEBUG_DMA|DEBUG_WRITE)) + DBG(host->SCpnt, acornscsi_dumpdma(host, "adji")); +#endif + /* + * Calculate correct DMA address - DMA is ahead of SCSI bus while + * writing. + * host->scsi.SCp.scsi_xferred is the number of bytes + * actually transferred to/from the SCSI bus. + * host->dma.transferred is the number of bytes transferred + * over DMA since host->dma.start_addr was last set. + * + * real_dma_addr = host->dma.start_addr + host->scsi.SCp.scsi_xferred + * - host->dma.transferred + */ + transferred = host->scsi.SCp.scsi_xferred - host->dma.transferred; + if (transferred < 0) + printk("scsi%d.%c: Ack! DMA write correction %ld < 0!\n", + host->host->host_no, acornscsi_target(host), transferred); + else if (transferred == 0) + host->dma.xfer_setup = 0; + else { + transferred += host->dma.start_addr; + dmac_write(host->dma.io_port, DMAC_TXADRLO, transferred); + dmac_write(host->dma.io_port, DMAC_TXADRMD, transferred >> 8); + dmac_write(host->dma.io_port, DMAC_TXADRHI, transferred >> 16); +#if (DEBUG & (DEBUG_DMA|DEBUG_WRITE)) + DBG(host->SCpnt, acornscsi_dumpdma(host, "adjo")); +#endif + } + } +} +#endif + +/* ========================================================================================= + * Data I/O + */ +static int +acornscsi_write_pio(AS_Host *host, char *bytes, int *ptr, int len, unsigned int max_timeout) +{ + unsigned int asr, timeout = max_timeout; + int my_ptr = *ptr; + + while (my_ptr < len) { + asr = sbic_arm_read(host->scsi.io_port, SBIC_ASR); + + if (asr & ASR_DBR) { + timeout = max_timeout; + + sbic_arm_write(host->scsi.io_port, SBIC_DATA, bytes[my_ptr++]); + } else if (asr & ASR_INT) + break; + else if (--timeout == 0) + break; + udelay(1); + } + + *ptr = my_ptr; + + return (timeout == 0) ? -1 : 0; +} + +/* + * Function: void acornscsi_sendcommand(AS_Host *host) + * Purpose : send a command to a target + * Params : host - host which is connected to target + */ +static void +acornscsi_sendcommand(AS_Host *host) +{ + Scsi_Cmnd *SCpnt = host->SCpnt; + + sbic_arm_write(host->scsi.io_port, SBIC_TRANSCNTH, 0); + sbic_arm_writenext(host->scsi.io_port, 0); + sbic_arm_writenext(host->scsi.io_port, SCpnt->cmd_len - host->scsi.SCp.sent_command); + + acornscsi_sbic_issuecmd(host, CMND_XFERINFO); + + if (acornscsi_write_pio(host, SCpnt->cmnd, + (int *)&host->scsi.SCp.sent_command, SCpnt->cmd_len, 1000000)) + printk("scsi%d: timeout while sending command\n", host->host->host_no); + + host->scsi.phase = PHASE_COMMAND; +} + +static +void acornscsi_sendmessage(AS_Host *host) +{ + unsigned int message_length = msgqueue_msglength(&host->scsi.msgs); + unsigned int msgnr; + struct message *msg; + +#if (DEBUG & DEBUG_MESSAGES) + printk("scsi%d.%c: sending message ", + host->host->host_no, acornscsi_target(host)); +#endif + + switch (message_length) { + case 0: + acornscsi_sbic_issuecmd(host, CMND_XFERINFO | CMND_SBT); + + acornscsi_sbic_wait(host, ASR_DBR, ASR_DBR, 1000, "sending message 1"); + + sbic_arm_write(host->scsi.io_port, SBIC_DATA, NOP); + + host->scsi.last_message = NOP; +#if (DEBUG & DEBUG_MESSAGES) + printk("NOP"); +#endif + break; + + case 1: + acornscsi_sbic_issuecmd(host, CMND_XFERINFO | CMND_SBT); + msg = msgqueue_getmsg(&host->scsi.msgs, 0); + + acornscsi_sbic_wait(host, ASR_DBR, ASR_DBR, 1000, "sending message 2"); + + sbic_arm_write(host->scsi.io_port, SBIC_DATA, msg->msg[0]); + + host->scsi.last_message = msg->msg[0]; +#if (DEBUG & DEBUG_MESSAGES) + print_msg(msg->msg); +#endif + break; + + default: + /* + * ANSI standard says: (SCSI-2 Rev 10c Sect 5.6.14) + * 'When a target sends this (MESSAGE_REJECT) message, it + * shall change to MESSAGE IN phase and send this message + * prior to requesting additional message bytes from the + * initiator. This provides an interlock so that the + * initiator can determine which message byte is rejected. + */ + sbic_arm_write(host->scsi.io_port, SBIC_TRANSCNTH, 0); + sbic_arm_writenext(host->scsi.io_port, 0); + sbic_arm_writenext(host->scsi.io_port, message_length); + acornscsi_sbic_issuecmd(host, CMND_XFERINFO); + + msgnr = 0; + while ((msg = msgqueue_getmsg(&host->scsi.msgs, msgnr++)) != NULL) { + unsigned int i; +#if (DEBUG & DEBUG_MESSAGES) + print_msg(msg); +#endif + i = 0; + if (acornscsi_write_pio(host, msg->msg, &i, msg->length, 1000000)) + printk("scsi%d: timeout while sending message\n", host->host->host_no); + + host->scsi.last_message = msg->msg[0]; + if (msg->msg[0] == EXTENDED_MESSAGE) + host->scsi.last_message |= msg->msg[2] << 8; + + if (i != msg->length) + break; + } + break; + } +#if (DEBUG & DEBUG_MESSAGES) + printk("\n"); +#endif +} + +/* + * Function: void acornscsi_readstatusbyte(AS_Host *host) + * Purpose : Read status byte from connected target + * Params : host - host connected to target + */ +static +void acornscsi_readstatusbyte(AS_Host *host) +{ + acornscsi_sbic_issuecmd(host, CMND_XFERINFO|CMND_SBT); + acornscsi_sbic_wait(host, ASR_DBR, ASR_DBR, 1000, "reading status byte"); + host->scsi.SCp.Status = sbic_arm_read(host->scsi.io_port, SBIC_DATA); +} + +/* + * Function: unsigned char acornscsi_readmessagebyte(AS_Host *host) + * Purpose : Read one message byte from connected target + * Params : host - host connected to target + */ +static +unsigned char acornscsi_readmessagebyte(AS_Host *host) +{ + unsigned char message; + + acornscsi_sbic_issuecmd(host, CMND_XFERINFO | CMND_SBT); + + acornscsi_sbic_wait(host, ASR_DBR, ASR_DBR, 1000, "for message byte"); + + message = sbic_arm_read(host->scsi.io_port, SBIC_DATA); + + /* wait for MSGIN-XFER-PAUSED */ + acornscsi_sbic_wait(host, ASR_INT, ASR_INT, 1000, "for interrupt after message byte"); + + sbic_arm_read(host->scsi.io_port, SBIC_SSR); + + return message; +} + +/* + * Function: void acornscsi_message(AS_Host *host) + * Purpose : Read complete message from connected target & action message + * Params : host - host connected to target + */ +static +void acornscsi_message(AS_Host *host) +{ + unsigned char message[16]; + unsigned int msgidx = 0, msglen = 1; + + do { + message[msgidx] = acornscsi_readmessagebyte(host); + + switch (msgidx) { + case 0: + if (message[0] == EXTENDED_MESSAGE || + (message[0] >= 0x20 && message[0] <= 0x2f)) + msglen = 2; + break; + + case 1: + if (message[0] == EXTENDED_MESSAGE) + msglen += message[msgidx]; + break; + } + msgidx += 1; + if (msgidx < msglen) { + acornscsi_sbic_issuecmd(host, CMND_NEGATEACK); + + /* wait for next msg-in */ + acornscsi_sbic_wait(host, ASR_INT, ASR_INT, 1000, "for interrupt after negate ack"); + sbic_arm_read(host->scsi.io_port, SBIC_SSR); + } + } while (msgidx < msglen); + +#if (DEBUG & DEBUG_MESSAGES) + printk("scsi%d.%c: message in: ", + host->host->host_no, acornscsi_target(host)); + print_msg(message); + printk("\n"); +#endif + + if (host->scsi.phase == PHASE_RECONNECTED) { + /* + * ANSI standard says: (Section SCSI-2 Rev. 10c Sect 5.6.17) + * 'Whenever a target reconnects to an initiator to continue + * a tagged I/O process, the SIMPLE QUEUE TAG message shall + * be sent immediately following the IDENTIFY message...' + */ + if (message[0] == SIMPLE_QUEUE_TAG) + host->scsi.reconnected.tag = message[1]; + if (acornscsi_reconnect_finish(host)) + host->scsi.phase = PHASE_MSGIN; + } + + switch (message[0]) { + case ABORT: + case ABORT_TAG: + case COMMAND_COMPLETE: + if (host->scsi.phase != PHASE_STATUSIN) { + printk(KERN_ERR "scsi%d.%c: command complete following non-status in phase?\n", + host->host->host_no, acornscsi_target(host)); + acornscsi_dumplog(host, host->SCpnt->device->id); + } + host->scsi.phase = PHASE_DONE; + host->scsi.SCp.Message = message[0]; + break; + + case SAVE_POINTERS: + /* + * ANSI standard says: (Section SCSI-2 Rev. 10c Sect 5.6.20) + * 'The SAVE DATA POINTER message is sent from a target to + * direct the initiator to copy the active data pointer to + * the saved data pointer for the current I/O process. + */ + acornscsi_dma_cleanup(host); + host->SCpnt->SCp = host->scsi.SCp; + host->SCpnt->SCp.sent_command = 0; + host->scsi.phase = PHASE_MSGIN; + break; + + case RESTORE_POINTERS: + /* + * ANSI standard says: (Section SCSI-2 Rev. 10c Sect 5.6.19) + * 'The RESTORE POINTERS message is sent from a target to + * direct the initiator to copy the most recently saved + * command, data, and status pointers for the I/O process + * to the corresponding active pointers. The command and + * status pointers shall be restored to the beginning of + * the present command and status areas.' + */ + acornscsi_dma_cleanup(host); + host->scsi.SCp = host->SCpnt->SCp; + host->scsi.phase = PHASE_MSGIN; + break; + + case DISCONNECT: + /* + * ANSI standard says: (Section SCSI-2 Rev. 10c Sect 6.4.2) + * 'On those occasions when an error or exception condition occurs + * and the target elects to repeat the information transfer, the + * target may repeat the transfer either issuing a RESTORE POINTERS + * message or by disconnecting without issuing a SAVE POINTERS + * message. When reconnection is completed, the most recent + * saved pointer values are restored.' + */ + acornscsi_dma_cleanup(host); + host->scsi.phase = PHASE_DISCONNECT; + break; + + case MESSAGE_REJECT: +#if 0 /* this isn't needed any more */ + /* + * If we were negociating sync transfer, we don't yet know if + * this REJECT is for the sync transfer or for the tagged queue/wide + * transfer. Re-initiate sync transfer negociation now, and if + * we got a REJECT in response to SDTR, then it'll be set to DONE. + */ + if (host->device[host->SCpnt->device->id].sync_state == SYNC_SENT_REQUEST) + host->device[host->SCpnt->device->id].sync_state = SYNC_NEGOCIATE; +#endif + + /* + * If we have any messages waiting to go out, then assert ATN now + */ + if (msgqueue_msglength(&host->scsi.msgs)) + acornscsi_sbic_issuecmd(host, CMND_ASSERTATN); + + switch (host->scsi.last_message) { +#ifdef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE + case HEAD_OF_QUEUE_TAG: + case ORDERED_QUEUE_TAG: + case SIMPLE_QUEUE_TAG: + /* + * ANSI standard says: (Section SCSI-2 Rev. 10c Sect 5.6.17) + * If a target does not implement tagged queuing and a queue tag + * message is received, it shall respond with a MESSAGE REJECT + * message and accept the I/O process as if it were untagged. + */ + printk(KERN_NOTICE "scsi%d.%c: disabling tagged queueing\n", + host->host->host_no, acornscsi_target(host)); + host->SCpnt->device->simple_tags = 0; + set_bit(host->SCpnt->device->id * 8 + host->SCpnt->device->lun, host->busyluns); + break; +#endif + case EXTENDED_MESSAGE | (EXTENDED_SDTR << 8): + /* + * Target can't handle synchronous transfers + */ + printk(KERN_NOTICE "scsi%d.%c: Using asynchronous transfer\n", + host->host->host_no, acornscsi_target(host)); + host->device[host->SCpnt->device->id].sync_xfer = SYNCHTRANSFER_2DBA; + host->device[host->SCpnt->device->id].sync_state = SYNC_ASYNCHRONOUS; + sbic_arm_write(host->scsi.io_port, SBIC_SYNCHTRANSFER, host->device[host->SCpnt->device->id].sync_xfer); + break; + + default: + break; + } + break; + + case QUEUE_FULL: + /* TODO: target queue is full */ + break; + + case SIMPLE_QUEUE_TAG: + /* tag queue reconnect... message[1] = queue tag. Print something to indicate something happened! */ + printk("scsi%d.%c: reconnect queue tag %02X\n", + host->host->host_no, acornscsi_target(host), + message[1]); + break; + + case EXTENDED_MESSAGE: + switch (message[2]) { +#ifdef CONFIG_SCSI_ACORNSCSI_SYNC + case EXTENDED_SDTR: + if (host->device[host->SCpnt->device->id].sync_state == SYNC_SENT_REQUEST) { + /* + * We requested synchronous transfers. This isn't quite right... + * We can only say if this succeeded if we proceed on to execute the + * command from this message. If we get a MESSAGE PARITY ERROR, + * and the target retries fail, then we fallback to asynchronous mode + */ + host->device[host->SCpnt->device->id].sync_state = SYNC_COMPLETED; + printk(KERN_NOTICE "scsi%d.%c: Using synchronous transfer, offset %d, %d ns\n", + host->host->host_no, acornscsi_target(host), + message[4], message[3] * 4); + host->device[host->SCpnt->device->id].sync_xfer = + calc_sync_xfer(message[3] * 4, message[4]); + } else { + unsigned char period, length; + /* + * Target requested synchronous transfers. The agreement is only + * to be in operation AFTER the target leaves message out phase. + */ + acornscsi_sbic_issuecmd(host, CMND_ASSERTATN); + period = max_t(unsigned int, message[3], sdtr_period / 4); + length = min_t(unsigned int, message[4], sdtr_size); + msgqueue_addmsg(&host->scsi.msgs, 5, EXTENDED_MESSAGE, 3, + EXTENDED_SDTR, period, length); + host->device[host->SCpnt->device->id].sync_xfer = + calc_sync_xfer(period * 4, length); + } + sbic_arm_write(host->scsi.io_port, SBIC_SYNCHTRANSFER, host->device[host->SCpnt->device->id].sync_xfer); + break; +#else + /* We do not accept synchronous transfers. Respond with a + * MESSAGE_REJECT. + */ +#endif + + case EXTENDED_WDTR: + /* The WD33C93A is only 8-bit. We respond with a MESSAGE_REJECT + * to a wide data transfer request. + */ + default: + acornscsi_sbic_issuecmd(host, CMND_ASSERTATN); + msgqueue_flush(&host->scsi.msgs); + msgqueue_addmsg(&host->scsi.msgs, 1, MESSAGE_REJECT); + break; + } + break; + +#ifdef CONFIG_SCSI_ACORNSCSI_LINK + case LINKED_CMD_COMPLETE: + case LINKED_FLG_CMD_COMPLETE: + /* + * We don't support linked commands yet + */ + if (0) { +#if (DEBUG & DEBUG_LINK) + printk("scsi%d.%c: lun %d tag %d linked command complete\n", + host->host->host_no, acornscsi_target(host), host->SCpnt->tag); +#endif + /* + * A linked command should only terminate with one of these messages + * if there are more linked commands available. + */ + if (!host->SCpnt->next_link) { + printk(KERN_WARNING "scsi%d.%c: lun %d tag %d linked command complete, but no next_link\n", + instance->host_no, acornscsi_target(host), host->SCpnt->tag); + acornscsi_sbic_issuecmd(host, CMND_ASSERTATN); + msgqueue_addmsg(&host->scsi.msgs, 1, ABORT); + } else { + Scsi_Cmnd *SCpnt = host->SCpnt; + + acornscsi_dma_cleanup(host); + + host->SCpnt = host->SCpnt->next_link; + host->SCpnt->tag = SCpnt->tag; + SCpnt->result = DID_OK | host->scsi.SCp.Message << 8 | host->Scsi.SCp.Status; + SCpnt->done(SCpnt); + + /* initialise host->SCpnt->SCp */ + } + break; + } +#endif + + default: /* reject message */ + printk(KERN_ERR "scsi%d.%c: unrecognised message %02X, rejecting\n", + host->host->host_no, acornscsi_target(host), + message[0]); + acornscsi_sbic_issuecmd(host, CMND_ASSERTATN); + msgqueue_flush(&host->scsi.msgs); + msgqueue_addmsg(&host->scsi.msgs, 1, MESSAGE_REJECT); + host->scsi.phase = PHASE_MSGIN; + break; + } + acornscsi_sbic_issuecmd(host, CMND_NEGATEACK); +} + +/* + * Function: int acornscsi_buildmessages(AS_Host *host) + * Purpose : build the connection messages for a host + * Params : host - host to add messages to + */ +static +void acornscsi_buildmessages(AS_Host *host) +{ +#if 0 + /* does the device need resetting? */ + if (cmd_reset) { + msgqueue_addmsg(&host->scsi.msgs, 1, BUS_DEVICE_RESET); + return; + } +#endif + + msgqueue_addmsg(&host->scsi.msgs, 1, + IDENTIFY(host->device[host->SCpnt->device->id].disconnect_ok, + host->SCpnt->device->lun)); + +#if 0 + /* does the device need the current command aborted */ + if (cmd_aborted) { + acornscsi_abortcmd(host->SCpnt->tag); + return; + } +#endif + +#ifdef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE + if (host->SCpnt->tag) { + unsigned int tag_type; + + if (host->SCpnt->cmnd[0] == REQUEST_SENSE || + host->SCpnt->cmnd[0] == TEST_UNIT_READY || + host->SCpnt->cmnd[0] == INQUIRY) + tag_type = HEAD_OF_QUEUE_TAG; + else + tag_type = SIMPLE_QUEUE_TAG; + msgqueue_addmsg(&host->scsi.msgs, 2, tag_type, host->SCpnt->tag); + } +#endif + +#ifdef CONFIG_SCSI_ACORNSCSI_SYNC + if (host->device[host->SCpnt->device->id].sync_state == SYNC_NEGOCIATE) { + host->device[host->SCpnt->device->id].sync_state = SYNC_SENT_REQUEST; + msgqueue_addmsg(&host->scsi.msgs, 5, + EXTENDED_MESSAGE, 3, EXTENDED_SDTR, + sdtr_period / 4, sdtr_size); + } +#endif +} + +/* + * Function: int acornscsi_starttransfer(AS_Host *host) + * Purpose : transfer data to/from connected target + * Params : host - host to which target is connected + * Returns : 0 if failure + */ +static +int acornscsi_starttransfer(AS_Host *host) +{ + int residual; + + if (!host->scsi.SCp.ptr /*&& host->scsi.SCp.this_residual*/) { + printk(KERN_ERR "scsi%d.%c: null buffer passed to acornscsi_starttransfer\n", + host->host->host_no, acornscsi_target(host)); + return 0; + } + + residual = host->SCpnt->request_bufflen - host->scsi.SCp.scsi_xferred; + + sbic_arm_write(host->scsi.io_port, SBIC_SYNCHTRANSFER, host->device[host->SCpnt->device->id].sync_xfer); + sbic_arm_writenext(host->scsi.io_port, residual >> 16); + sbic_arm_writenext(host->scsi.io_port, residual >> 8); + sbic_arm_writenext(host->scsi.io_port, residual); + acornscsi_sbic_issuecmd(host, CMND_XFERINFO); + return 1; +} + +/* ========================================================================================= + * Connection & Disconnection + */ +/* + * Function : acornscsi_reconnect(AS_Host *host) + * Purpose : reconnect a previously disconnected command + * Params : host - host specific data + * Remarks : SCSI spec says: + * 'The set of active pointers is restored from the set + * of saved pointers upon reconnection of the I/O process' + */ +static +int acornscsi_reconnect(AS_Host *host) +{ + unsigned int target, lun, ok = 0; + + target = sbic_arm_read(host->scsi.io_port, SBIC_SOURCEID); + + if (!(target & 8)) + printk(KERN_ERR "scsi%d: invalid source id after reselection " + "- device fault?\n", + host->host->host_no); + + target &= 7; + + if (host->SCpnt && !host->scsi.disconnectable) { + printk(KERN_ERR "scsi%d.%d: reconnected while command in " + "progress to target %d?\n", + host->host->host_no, target, host->SCpnt->device->id); + host->SCpnt = NULL; + } + + lun = sbic_arm_read(host->scsi.io_port, SBIC_DATA) & 7; + + host->scsi.reconnected.target = target; + host->scsi.reconnected.lun = lun; + host->scsi.reconnected.tag = 0; + + if (host->scsi.disconnectable && host->SCpnt && + host->SCpnt->device->id == target && host->SCpnt->device->lun == lun) + ok = 1; + + if (!ok && queue_probetgtlun(&host->queues.disconnected, target, lun)) + ok = 1; + + ADD_STATUS(target, 0x81, host->scsi.phase, 0); + + if (ok) { + host->scsi.phase = PHASE_RECONNECTED; + } else { + /* this doesn't seem to work */ + printk(KERN_ERR "scsi%d.%c: reselected with no command " + "to reconnect with\n", + host->host->host_no, '0' + target); + acornscsi_dumplog(host, target); + acornscsi_abortcmd(host, 0); + if (host->SCpnt) { + queue_add_cmd_tail(&host->queues.disconnected, host->SCpnt); + host->SCpnt = NULL; + } + } + acornscsi_sbic_issuecmd(host, CMND_NEGATEACK); + return !ok; +} + +/* + * Function: int acornscsi_reconect_finish(AS_Host *host) + * Purpose : finish reconnecting a command + * Params : host - host to complete + * Returns : 0 if failed + */ +static +int acornscsi_reconnect_finish(AS_Host *host) +{ + if (host->scsi.disconnectable && host->SCpnt) { + host->scsi.disconnectable = 0; + if (host->SCpnt->device->id == host->scsi.reconnected.target && + host->SCpnt->device->lun == host->scsi.reconnected.lun && + host->SCpnt->tag == host->scsi.reconnected.tag) { +#if (DEBUG & (DEBUG_QUEUES|DEBUG_DISCON)) + DBG(host->SCpnt, printk("scsi%d.%c: reconnected", + host->host->host_no, acornscsi_target(host))); +#endif + } else { + queue_add_cmd_tail(&host->queues.disconnected, host->SCpnt); +#if (DEBUG & (DEBUG_QUEUES|DEBUG_DISCON)) + DBG(host->SCpnt, printk("scsi%d.%c: had to move command " + "to disconnected queue\n", + host->host->host_no, acornscsi_target(host))); +#endif + host->SCpnt = NULL; + } + } + if (!host->SCpnt) { + host->SCpnt = queue_remove_tgtluntag(&host->queues.disconnected, + host->scsi.reconnected.target, + host->scsi.reconnected.lun, + host->scsi.reconnected.tag); +#if (DEBUG & (DEBUG_QUEUES|DEBUG_DISCON)) + DBG(host->SCpnt, printk("scsi%d.%c: had to get command", + host->host->host_no, acornscsi_target(host))); +#endif + } + + if (!host->SCpnt) + acornscsi_abortcmd(host, host->scsi.reconnected.tag); + else { + /* + * Restore data pointer from SAVED pointers. + */ + host->scsi.SCp = host->SCpnt->SCp; +#if (DEBUG & (DEBUG_QUEUES|DEBUG_DISCON)) + printk(", data pointers: [%p, %X]", + host->scsi.SCp.ptr, host->scsi.SCp.this_residual); +#endif + } +#if (DEBUG & (DEBUG_QUEUES|DEBUG_DISCON)) + printk("\n"); +#endif + + host->dma.transferred = host->scsi.SCp.scsi_xferred; + + return host->SCpnt != NULL; +} + +/* + * Function: void acornscsi_disconnect_unexpected(AS_Host *host) + * Purpose : handle an unexpected disconnect + * Params : host - host on which disconnect occurred + */ +static +void acornscsi_disconnect_unexpected(AS_Host *host) +{ + printk(KERN_ERR "scsi%d.%c: unexpected disconnect\n", + host->host->host_no, acornscsi_target(host)); +#if (DEBUG & DEBUG_ABORT) + acornscsi_dumplog(host, 8); +#endif + + acornscsi_done(host, &host->SCpnt, DID_ERROR); +} + +/* + * Function: void acornscsi_abortcmd(AS_host *host, unsigned char tag) + * Purpose : abort a currently executing command + * Params : host - host with connected command to abort + * tag - tag to abort + */ +static +void acornscsi_abortcmd(AS_Host *host, unsigned char tag) +{ + host->scsi.phase = PHASE_ABORTED; + sbic_arm_write(host->scsi.io_port, SBIC_CMND, CMND_ASSERTATN); + + msgqueue_flush(&host->scsi.msgs); +#ifdef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE + if (tag) + msgqueue_addmsg(&host->scsi.msgs, 2, ABORT_TAG, tag); + else +#endif + msgqueue_addmsg(&host->scsi.msgs, 1, ABORT); +} + +/* ========================================================================================== + * Interrupt routines. + */ +/* + * Function: int acornscsi_sbicintr(AS_Host *host) + * Purpose : handle interrupts from SCSI device + * Params : host - host to process + * Returns : INTR_PROCESS if expecting another SBIC interrupt + * INTR_IDLE if no interrupt + * INTR_NEXT_COMMAND if we have finished processing the command + */ +static +intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq) +{ + unsigned int asr, ssr; + + asr = sbic_arm_read(host->scsi.io_port, SBIC_ASR); + if (!(asr & ASR_INT)) + return INTR_IDLE; + + ssr = sbic_arm_read(host->scsi.io_port, SBIC_SSR); + +#if (DEBUG & DEBUG_PHASES) + print_sbic_status(asr, ssr, host->scsi.phase); +#endif + + ADD_STATUS(8, ssr, host->scsi.phase, in_irq); + + if (host->SCpnt && !host->scsi.disconnectable) + ADD_STATUS(host->SCpnt->device->id, ssr, host->scsi.phase, in_irq); + + switch (ssr) { + case 0x00: /* reset state - not advanced */ + printk(KERN_ERR "scsi%d: reset in standard mode but wanted advanced mode.\n", + host->host->host_no); + /* setup sbic - WD33C93A */ + sbic_arm_write(host->scsi.io_port, SBIC_OWNID, OWNID_EAF | host->host->this_id); + sbic_arm_write(host->scsi.io_port, SBIC_CMND, CMND_RESET); + return INTR_IDLE; + + case 0x01: /* reset state - advanced */ + sbic_arm_write(host->scsi.io_port, SBIC_CTRL, INIT_SBICDMA | CTRL_IDI); + sbic_arm_write(host->scsi.io_port, SBIC_TIMEOUT, TIMEOUT_TIME); + sbic_arm_write(host->scsi.io_port, SBIC_SYNCHTRANSFER, SYNCHTRANSFER_2DBA); + sbic_arm_write(host->scsi.io_port, SBIC_SOURCEID, SOURCEID_ER | SOURCEID_DSP); + msgqueue_flush(&host->scsi.msgs); + return INTR_IDLE; + + case 0x41: /* unexpected disconnect aborted command */ + acornscsi_disconnect_unexpected(host); + return INTR_NEXT_COMMAND; + } + + switch (host->scsi.phase) { + case PHASE_CONNECTING: /* STATE: command removed from issue queue */ + switch (ssr) { + case 0x11: /* -> PHASE_CONNECTED */ + /* BUS FREE -> SELECTION */ + host->scsi.phase = PHASE_CONNECTED; + msgqueue_flush(&host->scsi.msgs); + host->dma.transferred = host->scsi.SCp.scsi_xferred; + /* 33C93 gives next interrupt indicating bus phase */ + asr = sbic_arm_read(host->scsi.io_port, SBIC_ASR); + if (!(asr & ASR_INT)) + break; + ssr = sbic_arm_read(host->scsi.io_port, SBIC_SSR); + ADD_STATUS(8, ssr, host->scsi.phase, 1); + ADD_STATUS(host->SCpnt->device->id, ssr, host->scsi.phase, 1); + goto connected; + + case 0x42: /* select timed out */ + /* -> PHASE_IDLE */ + acornscsi_done(host, &host->SCpnt, DID_NO_CONNECT); + return INTR_NEXT_COMMAND; + + case 0x81: /* -> PHASE_RECONNECTED or PHASE_ABORTED */ + /* BUS FREE -> RESELECTION */ + host->origSCpnt = host->SCpnt; + host->SCpnt = NULL; + msgqueue_flush(&host->scsi.msgs); + acornscsi_reconnect(host); + break; + + default: + printk(KERN_ERR "scsi%d.%c: PHASE_CONNECTING, SSR %02X?\n", + host->host->host_no, acornscsi_target(host), ssr); + acornscsi_dumplog(host, host->SCpnt ? host->SCpnt->device->id : 8); + acornscsi_abortcmd(host, host->SCpnt->tag); + } + return INTR_PROCESSING; + + connected: + case PHASE_CONNECTED: /* STATE: device selected ok */ + switch (ssr) { +#ifdef NONSTANDARD + case 0x8a: /* -> PHASE_COMMAND, PHASE_COMMANDPAUSED */ + /* SELECTION -> COMMAND */ + acornscsi_sendcommand(host); + break; + + case 0x8b: /* -> PHASE_STATUS */ + /* SELECTION -> STATUS */ + acornscsi_readstatusbyte(host); + host->scsi.phase = PHASE_STATUSIN; + break; +#endif + + case 0x8e: /* -> PHASE_MSGOUT */ + /* SELECTION ->MESSAGE OUT */ + host->scsi.phase = PHASE_MSGOUT; + acornscsi_buildmessages(host); + acornscsi_sendmessage(host); + break; + + /* these should not happen */ + case 0x85: /* target disconnected */ + acornscsi_done(host, &host->SCpnt, DID_ERROR); + break; + + default: + printk(KERN_ERR "scsi%d.%c: PHASE_CONNECTED, SSR %02X?\n", + host->host->host_no, acornscsi_target(host), ssr); + acornscsi_dumplog(host, host->SCpnt ? host->SCpnt->device->id : 8); + acornscsi_abortcmd(host, host->SCpnt->tag); + } + return INTR_PROCESSING; + + case PHASE_MSGOUT: /* STATE: connected & sent IDENTIFY message */ + /* + * SCSI standard says that MESSAGE OUT phases can be followed by a + * DATA phase, STATUS phase, MESSAGE IN phase or COMMAND phase + */ + switch (ssr) { + case 0x8a: /* -> PHASE_COMMAND, PHASE_COMMANDPAUSED */ + case 0x1a: /* -> PHASE_COMMAND, PHASE_COMMANDPAUSED */ + /* MESSAGE OUT -> COMMAND */ + acornscsi_sendcommand(host); + break; + + case 0x8b: /* -> PHASE_STATUS */ + case 0x1b: /* -> PHASE_STATUS */ + /* MESSAGE OUT -> STATUS */ + acornscsi_readstatusbyte(host); + host->scsi.phase = PHASE_STATUSIN; + break; + + case 0x8e: /* -> PHASE_MSGOUT */ + /* MESSAGE_OUT(MESSAGE_IN) ->MESSAGE OUT */ + acornscsi_sendmessage(host); + break; + + case 0x4f: /* -> PHASE_MSGIN, PHASE_DISCONNECT */ + case 0x1f: /* -> PHASE_MSGIN, PHASE_DISCONNECT */ + /* MESSAGE OUT -> MESSAGE IN */ + acornscsi_message(host); + break; + + default: + printk(KERN_ERR "scsi%d.%c: PHASE_MSGOUT, SSR %02X?\n", + host->host->host_no, acornscsi_target(host), ssr); + acornscsi_dumplog(host, host->SCpnt ? host->SCpnt->device->id : 8); + } + return INTR_PROCESSING; + + case PHASE_COMMAND: /* STATE: connected & command sent */ + switch (ssr) { + case 0x18: /* -> PHASE_DATAOUT */ + /* COMMAND -> DATA OUT */ + if (host->scsi.SCp.sent_command != host->SCpnt->cmd_len) + acornscsi_abortcmd(host, host->SCpnt->tag); + acornscsi_dma_setup(host, DMA_OUT); + if (!acornscsi_starttransfer(host)) + acornscsi_abortcmd(host, host->SCpnt->tag); + host->scsi.phase = PHASE_DATAOUT; + return INTR_IDLE; + + case 0x19: /* -> PHASE_DATAIN */ + /* COMMAND -> DATA IN */ + if (host->scsi.SCp.sent_command != host->SCpnt->cmd_len) + acornscsi_abortcmd(host, host->SCpnt->tag); + acornscsi_dma_setup(host, DMA_IN); + if (!acornscsi_starttransfer(host)) + acornscsi_abortcmd(host, host->SCpnt->tag); + host->scsi.phase = PHASE_DATAIN; + return INTR_IDLE; + + case 0x1b: /* -> PHASE_STATUS */ + /* COMMAND -> STATUS */ + acornscsi_readstatusbyte(host); + host->scsi.phase = PHASE_STATUSIN; + break; + + case 0x1e: /* -> PHASE_MSGOUT */ + /* COMMAND -> MESSAGE OUT */ + acornscsi_sendmessage(host); + break; + + case 0x1f: /* -> PHASE_MSGIN, PHASE_DISCONNECT */ + /* COMMAND -> MESSAGE IN */ + acornscsi_message(host); + break; + + default: + printk(KERN_ERR "scsi%d.%c: PHASE_COMMAND, SSR %02X?\n", + host->host->host_no, acornscsi_target(host), ssr); + acornscsi_dumplog(host, host->SCpnt ? host->SCpnt->device->id : 8); + } + return INTR_PROCESSING; + + case PHASE_DISCONNECT: /* STATE: connected, received DISCONNECT msg */ + if (ssr == 0x85) { /* -> PHASE_IDLE */ + host->scsi.disconnectable = 1; + host->scsi.reconnected.tag = 0; + host->scsi.phase = PHASE_IDLE; + host->stats.disconnects += 1; + } else { + printk(KERN_ERR "scsi%d.%c: PHASE_DISCONNECT, SSR %02X instead of disconnect?\n", + host->host->host_no, acornscsi_target(host), ssr); + acornscsi_dumplog(host, host->SCpnt ? host->SCpnt->device->id : 8); + } + return INTR_NEXT_COMMAND; + + case PHASE_IDLE: /* STATE: disconnected */ + if (ssr == 0x81) /* -> PHASE_RECONNECTED or PHASE_ABORTED */ + acornscsi_reconnect(host); + else { + printk(KERN_ERR "scsi%d.%c: PHASE_IDLE, SSR %02X while idle?\n", + host->host->host_no, acornscsi_target(host), ssr); + acornscsi_dumplog(host, host->SCpnt ? host->SCpnt->device->id : 8); + } + return INTR_PROCESSING; + + case PHASE_RECONNECTED: /* STATE: device reconnected to initiator */ + /* + * Command reconnected - if MESGIN, get message - it may be + * the tag. If not, get command out of disconnected queue + */ + /* + * If we reconnected and we're not in MESSAGE IN phase after IDENTIFY, + * reconnect I_T_L command + */ + if (ssr != 0x8f && !acornscsi_reconnect_finish(host)) + return INTR_IDLE; + ADD_STATUS(host->SCpnt->device->id, ssr, host->scsi.phase, in_irq); + switch (ssr) { + case 0x88: /* data out phase */ + /* -> PHASE_DATAOUT */ + /* MESSAGE IN -> DATA OUT */ + acornscsi_dma_setup(host, DMA_OUT); + if (!acornscsi_starttransfer(host)) + acornscsi_abortcmd(host, host->SCpnt->tag); + host->scsi.phase = PHASE_DATAOUT; + return INTR_IDLE; + + case 0x89: /* data in phase */ + /* -> PHASE_DATAIN */ + /* MESSAGE IN -> DATA IN */ + acornscsi_dma_setup(host, DMA_IN); + if (!acornscsi_starttransfer(host)) + acornscsi_abortcmd(host, host->SCpnt->tag); + host->scsi.phase = PHASE_DATAIN; + return INTR_IDLE; + + case 0x8a: /* command out */ + /* MESSAGE IN -> COMMAND */ + acornscsi_sendcommand(host);/* -> PHASE_COMMAND, PHASE_COMMANDPAUSED */ + break; + + case 0x8b: /* status in */ + /* -> PHASE_STATUSIN */ + /* MESSAGE IN -> STATUS */ + acornscsi_readstatusbyte(host); + host->scsi.phase = PHASE_STATUSIN; + break; + + case 0x8e: /* message out */ + /* -> PHASE_MSGOUT */ + /* MESSAGE IN -> MESSAGE OUT */ + acornscsi_sendmessage(host); + break; + + case 0x8f: /* message in */ + acornscsi_message(host); /* -> PHASE_MSGIN, PHASE_DISCONNECT */ + break; + + default: + printk(KERN_ERR "scsi%d.%c: PHASE_RECONNECTED, SSR %02X after reconnect?\n", + host->host->host_no, acornscsi_target(host), ssr); + acornscsi_dumplog(host, host->SCpnt ? host->SCpnt->device->id : 8); + } + return INTR_PROCESSING; + + case PHASE_DATAIN: /* STATE: transferred data in */ + /* + * This is simple - if we disconnect then the DMA address & count is + * correct. + */ + switch (ssr) { + case 0x19: /* -> PHASE_DATAIN */ + case 0x89: /* -> PHASE_DATAIN */ + acornscsi_abortcmd(host, host->SCpnt->tag); + return INTR_IDLE; + + case 0x1b: /* -> PHASE_STATUSIN */ + case 0x4b: /* -> PHASE_STATUSIN */ + case 0x8b: /* -> PHASE_STATUSIN */ + /* DATA IN -> STATUS */ + host->scsi.SCp.scsi_xferred = host->SCpnt->request_bufflen - + acornscsi_sbic_xfcount(host); + acornscsi_dma_stop(host); + acornscsi_readstatusbyte(host); + host->scsi.phase = PHASE_STATUSIN; + break; + + case 0x1e: /* -> PHASE_MSGOUT */ + case 0x4e: /* -> PHASE_MSGOUT */ + case 0x8e: /* -> PHASE_MSGOUT */ + /* DATA IN -> MESSAGE OUT */ + host->scsi.SCp.scsi_xferred = host->SCpnt->request_bufflen - + acornscsi_sbic_xfcount(host); + acornscsi_dma_stop(host); + acornscsi_sendmessage(host); + break; + + case 0x1f: /* message in */ + case 0x4f: /* message in */ + case 0x8f: /* message in */ + /* DATA IN -> MESSAGE IN */ + host->scsi.SCp.scsi_xferred = host->SCpnt->request_bufflen - + acornscsi_sbic_xfcount(host); + acornscsi_dma_stop(host); + acornscsi_message(host); /* -> PHASE_MSGIN, PHASE_DISCONNECT */ + break; + + default: + printk(KERN_ERR "scsi%d.%c: PHASE_DATAIN, SSR %02X?\n", + host->host->host_no, acornscsi_target(host), ssr); + acornscsi_dumplog(host, host->SCpnt ? host->SCpnt->device->id : 8); + } + return INTR_PROCESSING; + + case PHASE_DATAOUT: /* STATE: transferred data out */ + /* + * This is more complicated - if we disconnect, the DMA could be 12 + * bytes ahead of us. We need to correct this. + */ + switch (ssr) { + case 0x18: /* -> PHASE_DATAOUT */ + case 0x88: /* -> PHASE_DATAOUT */ + acornscsi_abortcmd(host, host->SCpnt->tag); + return INTR_IDLE; + + case 0x1b: /* -> PHASE_STATUSIN */ + case 0x4b: /* -> PHASE_STATUSIN */ + case 0x8b: /* -> PHASE_STATUSIN */ + /* DATA OUT -> STATUS */ + host->scsi.SCp.scsi_xferred = host->SCpnt->request_bufflen - + acornscsi_sbic_xfcount(host); + acornscsi_dma_stop(host); + acornscsi_dma_adjust(host); + acornscsi_readstatusbyte(host); + host->scsi.phase = PHASE_STATUSIN; + break; + + case 0x1e: /* -> PHASE_MSGOUT */ + case 0x4e: /* -> PHASE_MSGOUT */ + case 0x8e: /* -> PHASE_MSGOUT */ + /* DATA OUT -> MESSAGE OUT */ + host->scsi.SCp.scsi_xferred = host->SCpnt->request_bufflen - + acornscsi_sbic_xfcount(host); + acornscsi_dma_stop(host); + acornscsi_dma_adjust(host); + acornscsi_sendmessage(host); + break; + + case 0x1f: /* message in */ + case 0x4f: /* message in */ + case 0x8f: /* message in */ + /* DATA OUT -> MESSAGE IN */ + host->scsi.SCp.scsi_xferred = host->SCpnt->request_bufflen - + acornscsi_sbic_xfcount(host); + acornscsi_dma_stop(host); + acornscsi_dma_adjust(host); + acornscsi_message(host); /* -> PHASE_MSGIN, PHASE_DISCONNECT */ + break; + + default: + printk(KERN_ERR "scsi%d.%c: PHASE_DATAOUT, SSR %02X?\n", + host->host->host_no, acornscsi_target(host), ssr); + acornscsi_dumplog(host, host->SCpnt ? host->SCpnt->device->id : 8); + } + return INTR_PROCESSING; + + case PHASE_STATUSIN: /* STATE: status in complete */ + switch (ssr) { + case 0x1f: /* -> PHASE_MSGIN, PHASE_DONE, PHASE_DISCONNECT */ + case 0x8f: /* -> PHASE_MSGIN, PHASE_DONE, PHASE_DISCONNECT */ + /* STATUS -> MESSAGE IN */ + acornscsi_message(host); + break; + + case 0x1e: /* -> PHASE_MSGOUT */ + case 0x8e: /* -> PHASE_MSGOUT */ + /* STATUS -> MESSAGE OUT */ + acornscsi_sendmessage(host); + break; + + default: + printk(KERN_ERR "scsi%d.%c: PHASE_STATUSIN, SSR %02X instead of MESSAGE_IN?\n", + host->host->host_no, acornscsi_target(host), ssr); + acornscsi_dumplog(host, host->SCpnt ? host->SCpnt->device->id : 8); + } + return INTR_PROCESSING; + + case PHASE_MSGIN: /* STATE: message in */ + switch (ssr) { + case 0x1e: /* -> PHASE_MSGOUT */ + case 0x4e: /* -> PHASE_MSGOUT */ + case 0x8e: /* -> PHASE_MSGOUT */ + /* MESSAGE IN -> MESSAGE OUT */ + acornscsi_sendmessage(host); + break; + + case 0x1f: /* -> PHASE_MSGIN, PHASE_DONE, PHASE_DISCONNECT */ + case 0x2f: + case 0x4f: + case 0x8f: + acornscsi_message(host); + break; + + case 0x85: + printk("scsi%d.%c: strange message in disconnection\n", + host->host->host_no, acornscsi_target(host)); + acornscsi_dumplog(host, host->SCpnt ? host->SCpnt->device->id : 8); + acornscsi_done(host, &host->SCpnt, DID_ERROR); + break; + + default: + printk(KERN_ERR "scsi%d.%c: PHASE_MSGIN, SSR %02X after message in?\n", + host->host->host_no, acornscsi_target(host), ssr); + acornscsi_dumplog(host, host->SCpnt ? host->SCpnt->device->id : 8); + } + return INTR_PROCESSING; + + case PHASE_DONE: /* STATE: received status & message */ + switch (ssr) { + case 0x85: /* -> PHASE_IDLE */ + acornscsi_done(host, &host->SCpnt, DID_OK); + return INTR_NEXT_COMMAND; + + case 0x1e: + case 0x8e: + acornscsi_sendmessage(host); + break; + + default: + printk(KERN_ERR "scsi%d.%c: PHASE_DONE, SSR %02X instead of disconnect?\n", + host->host->host_no, acornscsi_target(host), ssr); + acornscsi_dumplog(host, host->SCpnt ? host->SCpnt->device->id : 8); + } + return INTR_PROCESSING; + + case PHASE_ABORTED: + switch (ssr) { + case 0x85: + if (host->SCpnt) + acornscsi_done(host, &host->SCpnt, DID_ABORT); + else { + clear_bit(host->scsi.reconnected.target * 8 + host->scsi.reconnected.lun, + host->busyluns); + host->scsi.phase = PHASE_IDLE; + } + return INTR_NEXT_COMMAND; + + case 0x1e: + case 0x2e: + case 0x4e: + case 0x8e: + acornscsi_sendmessage(host); + break; + + default: + printk(KERN_ERR "scsi%d.%c: PHASE_ABORTED, SSR %02X?\n", + host->host->host_no, acornscsi_target(host), ssr); + acornscsi_dumplog(host, host->SCpnt ? host->SCpnt->device->id : 8); + } + return INTR_PROCESSING; + + default: + printk(KERN_ERR "scsi%d.%c: unknown driver phase %d\n", + host->host->host_no, acornscsi_target(host), ssr); + acornscsi_dumplog(host, host->SCpnt ? host->SCpnt->device->id : 8); + } + return INTR_PROCESSING; +} + +/* + * Prototype: void acornscsi_intr(int irq, void *dev_id, struct pt_regs *regs) + * Purpose : handle interrupts from Acorn SCSI card + * Params : irq - interrupt number + * dev_id - device specific data (AS_Host structure) + * regs - processor registers when interrupt occurred + */ +static irqreturn_t +acornscsi_intr(int irq, void *dev_id, struct pt_regs *regs) +{ + AS_Host *host = (AS_Host *)dev_id; + intr_ret_t ret; + int iostatus; + int in_irq = 0; + + do { + ret = INTR_IDLE; + + iostatus = inb(host->card.io_intr); + + if (iostatus & 2) { + acornscsi_dma_intr(host); + iostatus = inb(host->card.io_intr); + } + + if (iostatus & 8) + ret = acornscsi_sbicintr(host, in_irq); + + /* + * If we have a transfer pending, start it. + * Only start it if the interface has already started transferring + * it's data + */ + if (host->dma.xfer_required) + acornscsi_dma_xfer(host); + + if (ret == INTR_NEXT_COMMAND) + ret = acornscsi_kick(host); + + in_irq = 1; + } while (ret != INTR_IDLE); + + return IRQ_HANDLED; +} + +/*============================================================================================= + * Interfaces between interrupt handler and rest of scsi code + */ + +/* + * Function : acornscsi_queuecmd(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *)) + * Purpose : queues a SCSI command + * Params : cmd - SCSI command + * done - function called on completion, with pointer to command descriptor + * Returns : 0, or < 0 on error. + */ +int acornscsi_queuecmd(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *)) +{ + AS_Host *host = (AS_Host *)SCpnt->device->host->hostdata; + + if (!done) { + /* there should be some way of rejecting errors like this without panicing... */ + panic("scsi%d: queuecommand called with NULL done function [cmd=%p]", + host->host->host_no, SCpnt); + return -EINVAL; + } + +#if (DEBUG & DEBUG_NO_WRITE) + if (acornscsi_cmdtype(SCpnt->cmnd[0]) == CMD_WRITE && (NO_WRITE & (1 << SCpnt->device->id))) { + printk(KERN_CRIT "scsi%d.%c: WRITE attempted with NO_WRITE flag set\n", + host->host->host_no, '0' + SCpnt->device->id); + SCpnt->result = DID_NO_CONNECT << 16; + done(SCpnt); + return 0; + } +#endif + + SCpnt->scsi_done = done; + SCpnt->host_scribble = NULL; + SCpnt->result = 0; + SCpnt->tag = 0; + SCpnt->SCp.phase = (int)acornscsi_datadirection(SCpnt->cmnd[0]); + SCpnt->SCp.sent_command = 0; + SCpnt->SCp.scsi_xferred = 0; + + init_SCp(SCpnt); + + host->stats.queues += 1; + + { + unsigned long flags; + + if (!queue_add_cmd_ordered(&host->queues.issue, SCpnt)) { + SCpnt->result = DID_ERROR << 16; + done(SCpnt); + return 0; + } + local_irq_save(flags); + if (host->scsi.phase == PHASE_IDLE) + acornscsi_kick(host); + local_irq_restore(flags); + } + return 0; +} + +/* + * Prototype: void acornscsi_reportstatus(Scsi_Cmnd **SCpntp1, Scsi_Cmnd **SCpntp2, int result) + * Purpose : pass a result to *SCpntp1, and check if *SCpntp1 = *SCpntp2 + * Params : SCpntp1 - pointer to command to return + * SCpntp2 - pointer to command to check + * result - result to pass back to mid-level done function + * Returns : *SCpntp2 = NULL if *SCpntp1 is the same command structure as *SCpntp2. + */ +static inline +void acornscsi_reportstatus(Scsi_Cmnd **SCpntp1, Scsi_Cmnd **SCpntp2, int result) +{ + Scsi_Cmnd *SCpnt = *SCpntp1; + + if (SCpnt) { + *SCpntp1 = NULL; + + SCpnt->result = result; + SCpnt->scsi_done(SCpnt); + } + + if (SCpnt == *SCpntp2) + *SCpntp2 = NULL; +} + +enum res_abort { res_not_running, res_success, res_success_clear, res_snooze }; + +/* + * Prototype: enum res acornscsi_do_abort(Scsi_Cmnd *SCpnt) + * Purpose : abort a command on this host + * Params : SCpnt - command to abort + * Returns : our abort status + */ +static enum res_abort +acornscsi_do_abort(AS_Host *host, Scsi_Cmnd *SCpnt) +{ + enum res_abort res = res_not_running; + + if (queue_remove_cmd(&host->queues.issue, SCpnt)) { + /* + * The command was on the issue queue, and has not been + * issued yet. We can remove the command from the queue, + * and acknowledge the abort. Neither the devices nor the + * interface know about the command. + */ +//#if (DEBUG & DEBUG_ABORT) + printk("on issue queue "); +//#endif + res = res_success; + } else if (queue_remove_cmd(&host->queues.disconnected, SCpnt)) { + /* + * The command was on the disconnected queue. Simply + * acknowledge the abort condition, and when the target + * reconnects, we will give it an ABORT message. The + * target should then disconnect, and we will clear + * the busylun bit. + */ +//#if (DEBUG & DEBUG_ABORT) + printk("on disconnected queue "); +//#endif + res = res_success; + } else if (host->SCpnt == SCpnt) { + unsigned long flags; + +//#if (DEBUG & DEBUG_ABORT) + printk("executing "); +//#endif + + local_irq_save(flags); + switch (host->scsi.phase) { + /* + * If the interface is idle, and the command is 'disconnectable', + * then it is the same as on the disconnected queue. We simply + * remove all traces of the command. When the target reconnects, + * we will give it an ABORT message since the command could not + * be found. When the target finally disconnects, we will clear + * the busylun bit. + */ + case PHASE_IDLE: + if (host->scsi.disconnectable) { + host->scsi.disconnectable = 0; + host->SCpnt = NULL; + res = res_success; + } + break; + + /* + * If the command has connected and done nothing further, + * simply force a disconnect. We also need to clear the + * busylun bit. + */ + case PHASE_CONNECTED: + sbic_arm_write(host->scsi.io_port, SBIC_CMND, CMND_DISCONNECT); + host->SCpnt = NULL; + res = res_success_clear; + break; + + default: + acornscsi_abortcmd(host, host->SCpnt->tag); + res = res_snooze; + } + local_irq_restore(flags); + } else if (host->origSCpnt == SCpnt) { + /* + * The command will be executed next, but a command + * is currently using the interface. This is similar to + * being on the issue queue, except the busylun bit has + * been set. + */ + host->origSCpnt = NULL; +//#if (DEBUG & DEBUG_ABORT) + printk("waiting for execution "); +//#endif + res = res_success_clear; + } else + printk("unknown "); + + return res; +} + +/* + * Prototype: int acornscsi_abort(Scsi_Cmnd *SCpnt) + * Purpose : abort a command on this host + * Params : SCpnt - command to abort + * Returns : one of SCSI_ABORT_ macros + */ +int acornscsi_abort(Scsi_Cmnd *SCpnt) +{ + AS_Host *host = (AS_Host *) SCpnt->device->host->hostdata; + int result; + + host->stats.aborts += 1; + +#if (DEBUG & DEBUG_ABORT) + { + int asr, ssr; + asr = sbic_arm_read(host->scsi.io_port, SBIC_ASR); + ssr = sbic_arm_read(host->scsi.io_port, SBIC_SSR); + + printk(KERN_WARNING "acornscsi_abort: "); + print_sbic_status(asr, ssr, host->scsi.phase); + acornscsi_dumplog(host, SCpnt->device->id); + } +#endif + + printk("scsi%d: ", host->host->host_no); + + switch (acornscsi_do_abort(host, SCpnt)) { + /* + * We managed to find the command and cleared it out. + * We do not expect the command to be executing on the + * target, but we have set the busylun bit. + */ + case res_success_clear: +//#if (DEBUG & DEBUG_ABORT) + printk("clear "); +//#endif + clear_bit(SCpnt->device->id * 8 + SCpnt->device->lun, host->busyluns); + + /* + * We found the command, and cleared it out. Either + * the command is still known to be executing on the + * target, or the busylun bit is not set. + */ + case res_success: +//#if (DEBUG & DEBUG_ABORT) + printk("success\n"); +//#endif + SCpnt->result = DID_ABORT << 16; + SCpnt->scsi_done(SCpnt); + result = SCSI_ABORT_SUCCESS; + break; + + /* + * We did find the command, but unfortunately we couldn't + * unhook it from ourselves. Wait some more, and if it + * still doesn't complete, reset the interface. + */ + case res_snooze: +//#if (DEBUG & DEBUG_ABORT) + printk("snooze\n"); +//#endif + result = SCSI_ABORT_SNOOZE; + break; + + /* + * The command could not be found (either because it completed, + * or it got dropped. + */ + default: + case res_not_running: + acornscsi_dumplog(host, SCpnt->device->id); +#if (DEBUG & DEBUG_ABORT) + result = SCSI_ABORT_SNOOZE; +#else + result = SCSI_ABORT_NOT_RUNNING; +#endif +//#if (DEBUG & DEBUG_ABORT) + printk("not running\n"); +//#endif + break; + } + + return result; +} + +/* + * Prototype: int acornscsi_reset(Scsi_Cmnd *SCpnt, unsigned int reset_flags) + * Purpose : reset a command on this host/reset this host + * Params : SCpnt - command causing reset + * result - what type of reset to perform + * Returns : one of SCSI_RESET_ macros + */ +int acornscsi_reset(Scsi_Cmnd *SCpnt, unsigned int reset_flags) +{ + AS_Host *host = (AS_Host *)SCpnt->device->host->hostdata; + Scsi_Cmnd *SCptr; + + host->stats.resets += 1; + +#if (DEBUG & DEBUG_RESET) + { + int asr, ssr; + + asr = sbic_arm_read(host->scsi.io_port, SBIC_ASR); + ssr = sbic_arm_read(host->scsi.io_port, SBIC_SSR); + + printk(KERN_WARNING "acornscsi_reset: "); + print_sbic_status(asr, ssr, host->scsi.phase); + acornscsi_dumplog(host, SCpnt->device->id); + } +#endif + + acornscsi_dma_stop(host); + + SCptr = host->SCpnt; + + /* + * do hard reset. This resets all devices on this host, and so we + * must set the reset status on all commands. + */ + acornscsi_resetcard(host); + + /* + * report reset on commands current connected/disconnected + */ + acornscsi_reportstatus(&host->SCpnt, &SCptr, DID_RESET); + + while ((SCptr = queue_remove(&host->queues.disconnected)) != NULL) + acornscsi_reportstatus(&SCptr, &SCpnt, DID_RESET); + + if (SCpnt) { + SCpnt->result = DID_RESET << 16; + SCpnt->scsi_done(SCpnt); + } + + return SCSI_RESET_BUS_RESET | SCSI_RESET_HOST_RESET | SCSI_RESET_SUCCESS; +} + +/*============================================================================================== + * initialisation & miscellaneous support + */ + +/* + * Function: char *acornscsi_info(struct Scsi_Host *host) + * Purpose : return a string describing this interface + * Params : host - host to give information on + * Returns : a constant string + */ +const +char *acornscsi_info(struct Scsi_Host *host) +{ + static char string[100], *p; + + p = string; + + p += sprintf(string, "%s at port %08lX irq %d v%d.%d.%d" +#ifdef CONFIG_SCSI_ACORNSCSI_SYNC + " SYNC" +#endif +#ifdef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE + " TAG" +#endif +#ifdef CONFIG_SCSI_ACORNSCSI_LINK + " LINK" +#endif +#if (DEBUG & DEBUG_NO_WRITE) + " NOWRITE ("NO_WRITE_STR")" +#endif + , host->hostt->name, host->io_port, host->irq, + VER_MAJOR, VER_MINOR, VER_PATCH); + return string; +} + +int acornscsi_proc_info(struct Scsi_Host *instance, char *buffer, char **start, off_t offset, + int length, int inout) +{ + int pos, begin = 0, devidx; + Scsi_Device *scd; + AS_Host *host; + char *p = buffer; + + if (inout == 1) + return -EINVAL; + + host = (AS_Host *)instance->hostdata; + + p += sprintf(p, "AcornSCSI driver v%d.%d.%d" +#ifdef CONFIG_SCSI_ACORNSCSI_SYNC + " SYNC" +#endif +#ifdef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE + " TAG" +#endif +#ifdef CONFIG_SCSI_ACORNSCSI_LINK + " LINK" +#endif +#if (DEBUG & DEBUG_NO_WRITE) + " NOWRITE ("NO_WRITE_STR")" +#endif + "\n\n", VER_MAJOR, VER_MINOR, VER_PATCH); + + p += sprintf(p, "SBIC: WD33C93A Address: %08X IRQ : %d\n", + host->scsi.io_port, host->scsi.irq); +#ifdef USE_DMAC + p += sprintf(p, "DMAC: uPC71071 Address: %08X IRQ : %d\n\n", + host->dma.io_port, host->scsi.irq); +#endif + + p += sprintf(p, "Statistics:\n" + "Queued commands: %-10u Issued commands: %-10u\n" + "Done commands : %-10u Reads : %-10u\n" + "Writes : %-10u Others : %-10u\n" + "Disconnects : %-10u Aborts : %-10u\n" + "Resets : %-10u\n\nLast phases:", + host->stats.queues, host->stats.removes, + host->stats.fins, host->stats.reads, + host->stats.writes, host->stats.miscs, + host->stats.disconnects, host->stats.aborts, + host->stats.resets); + + for (devidx = 0; devidx < 9; devidx ++) { + unsigned int statptr, prev; + + p += sprintf(p, "\n%c:", devidx == 8 ? 'H' : ('0' + devidx)); + statptr = host->status_ptr[devidx] - 10; + + if ((signed int)statptr < 0) + statptr += STATUS_BUFFER_SIZE; + + prev = host->status[devidx][statptr].when; + + for (; statptr != host->status_ptr[devidx]; statptr = (statptr + 1) & (STATUS_BUFFER_SIZE - 1)) { + if (host->status[devidx][statptr].when) { + p += sprintf(p, "%c%02X:%02X+%2ld", + host->status[devidx][statptr].irq ? '-' : ' ', + host->status[devidx][statptr].ph, + host->status[devidx][statptr].ssr, + (host->status[devidx][statptr].when - prev) < 100 ? + (host->status[devidx][statptr].when - prev) : 99); + prev = host->status[devidx][statptr].when; + } + } + } + + p += sprintf(p, "\nAttached devices:\n"); + + shost_for_each_device(scd, instance) { + p += sprintf(p, "Device/Lun TaggedQ Sync\n"); + p += sprintf(p, " %d/%d ", scd->id, scd->lun); + if (scd->tagged_supported) + p += sprintf(p, "%3sabled(%3d) ", + scd->simple_tags ? "en" : "dis", + scd->current_tag); + else + p += sprintf(p, "unsupported "); + + if (host->device[scd->id].sync_xfer & 15) + p += sprintf(p, "offset %d, %d ns\n", + host->device[scd->id].sync_xfer & 15, + acornscsi_getperiod(host->device[scd->id].sync_xfer)); + else + p += sprintf(p, "async\n"); + + pos = p - buffer; + if (pos + begin < offset) { + begin += pos; + p = buffer; + } + pos = p - buffer; + if (pos + begin > offset + length) { + scsi_device_put(scd); + break; + } + } + + pos = p - buffer; + + *start = buffer + (offset - begin); + pos -= offset - begin; + + if (pos > length) + pos = length; + + return pos; +} + +static Scsi_Host_Template acornscsi_template = { + .module = THIS_MODULE, + .proc_info = acornscsi_proc_info, + .name = "AcornSCSI", + .info = acornscsi_info, + .queuecommand = acornscsi_queuecmd, +#warning fixme + .abort = acornscsi_abort, + .reset = acornscsi_reset, + .can_queue = 16, + .this_id = 7, + .sg_tablesize = SG_ALL, + .cmd_per_lun = 2, + .unchecked_isa_dma = 0, + .use_clustering = DISABLE_CLUSTERING, + .proc_name = "acornscsi", +}; + +static int __devinit +acornscsi_probe(struct expansion_card *ec, const struct ecard_id *id) +{ + struct Scsi_Host *host; + AS_Host *ashost; + int ret = -ENOMEM; + + host = scsi_host_alloc(&acornscsi_template, sizeof(AS_Host)); + if (!host) + goto out; + + ashost = (AS_Host *)host->hostdata; + + host->io_port = ecard_address(ec, ECARD_MEMC, 0); + host->irq = ec->irq; + + ashost->host = host; + ashost->scsi.io_port = ioaddr(host->io_port + 0x800); + ashost->scsi.irq = host->irq; + ashost->card.io_intr = POD_SPACE(host->io_port) + 0x800; + ashost->card.io_page = POD_SPACE(host->io_port) + 0xc00; + ashost->card.io_ram = ioaddr(host->io_port); + ashost->dma.io_port = host->io_port + 0xc00; + ashost->dma.io_intr_clear = POD_SPACE(host->io_port) + 0x800; + + ec->irqaddr = (char *)ioaddr(ashost->card.io_intr); + ec->irqmask = 0x0a; + + ret = -EBUSY; + if (!request_region(host->io_port + 0x800, 2, "acornscsi(sbic)")) + goto err_1; + if (!request_region(ashost->card.io_intr, 1, "acornscsi(intr)")) + goto err_2; + if (!request_region(ashost->card.io_page, 1, "acornscsi(page)")) + goto err_3; +#ifdef USE_DMAC + if (!request_region(ashost->dma.io_port, 256, "acornscsi(dmac)")) + goto err_4; +#endif + if (!request_region(host->io_port, 2048, "acornscsi(ram)")) + goto err_5; + + ret = request_irq(host->irq, acornscsi_intr, SA_INTERRUPT, "acornscsi", ashost); + if (ret) { + printk(KERN_CRIT "scsi%d: IRQ%d not free: %d\n", + host->host_no, ashost->scsi.irq, ret); + goto err_6; + } + + memset(&ashost->stats, 0, sizeof (ashost->stats)); + queue_initialise(&ashost->queues.issue); + queue_initialise(&ashost->queues.disconnected); + msgqueue_initialise(&ashost->scsi.msgs); + + acornscsi_resetcard(ashost); + + ret = scsi_add_host(host, &ec->dev); + if (ret) + goto err_7; + + scsi_scan_host(host); + goto out; + + err_7: + free_irq(host->irq, ashost); + err_6: + release_region(host->io_port, 2048); + err_5: +#ifdef USE_DMAC + release_region(ashost->dma.io_port, 256); +#endif + err_4: + release_region(ashost->card.io_page, 1); + err_3: + release_region(ashost->card.io_intr, 1); + err_2: + release_region(host->io_port + 0x800, 2); + err_1: + scsi_host_put(host); + out: + return ret; +} + +static void __devexit acornscsi_remove(struct expansion_card *ec) +{ + struct Scsi_Host *host = ecard_get_drvdata(ec); + AS_Host *ashost = (AS_Host *)host->hostdata; + + ecard_set_drvdata(ec, NULL); + scsi_remove_host(host); + + /* + * Put card into RESET state + */ + outb(0x80, ashost->card.io_page); + + free_irq(host->irq, ashost); + + release_region(host->io_port + 0x800, 2); + release_region(ashost->card.io_intr, 1); + release_region(ashost->card.io_page, 1); + release_region(ashost->dma.io_port, 256); + release_region(host->io_port, 2048); + + msgqueue_free(&ashost->scsi.msgs); + queue_free(&ashost->queues.disconnected); + queue_free(&ashost->queues.issue); + scsi_host_put(host); +} + +static const struct ecard_id acornscsi_cids[] = { + { MANU_ACORN, PROD_ACORN_SCSI }, + { 0xffff, 0xffff }, +}; + +static struct ecard_driver acornscsi_driver = { + .probe = acornscsi_probe, + .remove = __devexit_p(acornscsi_remove), + .id_table = acornscsi_cids, + .drv = { + .name = "acornscsi", + }, +}; + +static int __init acornscsi_init(void) +{ + return ecard_register_driver(&acornscsi_driver); +} + +static void __exit acornscsi_exit(void) +{ + ecard_remove_driver(&acornscsi_driver); +} + +module_init(acornscsi_init); +module_exit(acornscsi_exit); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("AcornSCSI driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/arm/acornscsi.h b/drivers/scsi/arm/acornscsi.h new file mode 100644 index 00000000000..03881f09164 --- /dev/null +++ b/drivers/scsi/arm/acornscsi.h @@ -0,0 +1,358 @@ +/* + * linux/drivers/acorn/scsi/acornscsi.h + * + * Copyright (C) 1997 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Acorn SCSI driver + */ +#ifndef ACORNSCSI_H +#define ACORNSCSI_H + +/* SBIC registers */ +#define SBIC_OWNID 0 +#define OWNID_FS1 (1<<7) +#define OWNID_FS2 (1<<6) +#define OWNID_EHP (1<<4) +#define OWNID_EAF (1<<3) + +#define SBIC_CTRL 1 +#define CTRL_DMAMODE (1<<7) +#define CTRL_DMADBAMODE (1<<6) +#define CTRL_DMABURST (1<<5) +#define CTRL_DMAPOLLED 0 +#define CTRL_HHP (1<<4) +#define CTRL_EDI (1<<3) +#define CTRL_IDI (1<<2) +#define CTRL_HA (1<<1) +#define CTRL_HSP (1<<0) + +#define SBIC_TIMEOUT 2 +#define SBIC_TOTSECTS 3 +#define SBIC_TOTHEADS 4 +#define SBIC_TOTCYLH 5 +#define SBIC_TOTCYLL 6 +#define SBIC_LOGADDRH 7 +#define SBIC_LOGADDRM2 8 +#define SBIC_LOGADDRM1 9 +#define SBIC_LOGADDRL 10 +#define SBIC_SECTORNUM 11 +#define SBIC_HEADNUM 12 +#define SBIC_CYLH 13 +#define SBIC_CYLL 14 +#define SBIC_TARGETLUN 15 +#define TARGETLUN_TLV (1<<7) +#define TARGETLUN_DOK (1<<6) + +#define SBIC_CMNDPHASE 16 +#define SBIC_SYNCHTRANSFER 17 +#define SYNCHTRANSFER_OF0 0x00 +#define SYNCHTRANSFER_OF1 0x01 +#define SYNCHTRANSFER_OF2 0x02 +#define SYNCHTRANSFER_OF3 0x03 +#define SYNCHTRANSFER_OF4 0x04 +#define SYNCHTRANSFER_OF5 0x05 +#define SYNCHTRANSFER_OF6 0x06 +#define SYNCHTRANSFER_OF7 0x07 +#define SYNCHTRANSFER_OF8 0x08 +#define SYNCHTRANSFER_OF9 0x09 +#define SYNCHTRANSFER_OF10 0x0A +#define SYNCHTRANSFER_OF11 0x0B +#define SYNCHTRANSFER_OF12 0x0C +#define SYNCHTRANSFER_8DBA 0x00 +#define SYNCHTRANSFER_2DBA 0x20 +#define SYNCHTRANSFER_3DBA 0x30 +#define SYNCHTRANSFER_4DBA 0x40 +#define SYNCHTRANSFER_5DBA 0x50 +#define SYNCHTRANSFER_6DBA 0x60 +#define SYNCHTRANSFER_7DBA 0x70 + +#define SBIC_TRANSCNTH 18 +#define SBIC_TRANSCNTM 19 +#define SBIC_TRANSCNTL 20 +#define SBIC_DESTID 21 +#define DESTID_SCC (1<<7) +#define DESTID_DPD (1<<6) + +#define SBIC_SOURCEID 22 +#define SOURCEID_ER (1<<7) +#define SOURCEID_ES (1<<6) +#define SOURCEID_DSP (1<<5) +#define SOURCEID_SIV (1<<4) + +#define SBIC_SSR 23 +#define SBIC_CMND 24 +#define CMND_RESET 0x00 +#define CMND_ABORT 0x01 +#define CMND_ASSERTATN 0x02 +#define CMND_NEGATEACK 0x03 +#define CMND_DISCONNECT 0x04 +#define CMND_RESELECT 0x05 +#define CMND_SELWITHATN 0x06 +#define CMND_SELECT 0x07 +#define CMND_SELECTATNTRANSFER 0x08 +#define CMND_SELECTTRANSFER 0x09 +#define CMND_RESELECTRXDATA 0x0A +#define CMND_RESELECTTXDATA 0x0B +#define CMND_WAITFORSELRECV 0x0C +#define CMND_SENDSTATCMD 0x0D +#define CMND_SENDDISCONNECT 0x0E +#define CMND_SETIDI 0x0F +#define CMND_RECEIVECMD 0x10 +#define CMND_RECEIVEDTA 0x11 +#define CMND_RECEIVEMSG 0x12 +#define CMND_RECEIVEUSP 0x13 +#define CMND_SENDCMD 0x14 +#define CMND_SENDDATA 0x15 +#define CMND_SENDMSG 0x16 +#define CMND_SENDUSP 0x17 +#define CMND_TRANSLATEADDR 0x18 +#define CMND_XFERINFO 0x20 +#define CMND_SBT (1<<7) + +#define SBIC_DATA 25 +#define SBIC_ASR 26 +#define ASR_INT (1<<7) +#define ASR_LCI (1<<6) +#define ASR_BSY (1<<5) +#define ASR_CIP (1<<4) +#define ASR_PE (1<<1) +#define ASR_DBR (1<<0) + +/* DMAC registers */ +#define DMAC_INIT 0x00 +#define INIT_8BIT (1) + +#define DMAC_CHANNEL 0x80 +#define CHANNEL_0 0x00 +#define CHANNEL_1 0x01 +#define CHANNEL_2 0x02 +#define CHANNEL_3 0x03 + +#define DMAC_TXCNTLO 0x01 +#define DMAC_TXCNTHI 0x81 +#define DMAC_TXADRLO 0x02 +#define DMAC_TXADRMD 0x82 +#define DMAC_TXADRHI 0x03 + +#define DMAC_DEVCON0 0x04 +#define DEVCON0_AKL (1<<7) +#define DEVCON0_RQL (1<<6) +#define DEVCON0_EXW (1<<5) +#define DEVCON0_ROT (1<<4) +#define DEVCON0_CMP (1<<3) +#define DEVCON0_DDMA (1<<2) +#define DEVCON0_AHLD (1<<1) +#define DEVCON0_MTM (1<<0) + +#define DMAC_DEVCON1 0x84 +#define DEVCON1_WEV (1<<1) +#define DEVCON1_BHLD (1<<0) + +#define DMAC_MODECON 0x05 +#define MODECON_WOED 0x01 +#define MODECON_VERIFY 0x00 +#define MODECON_READ 0x04 +#define MODECON_WRITE 0x08 +#define MODECON_AUTOINIT 0x10 +#define MODECON_ADDRDIR 0x20 +#define MODECON_DEMAND 0x00 +#define MODECON_SINGLE 0x40 +#define MODECON_BLOCK 0x80 +#define MODECON_CASCADE 0xC0 + +#define DMAC_STATUS 0x85 +#define STATUS_TC0 (1<<0) +#define STATUS_RQ0 (1<<4) + +#define DMAC_TEMPLO 0x06 +#define DMAC_TEMPHI 0x86 +#define DMAC_REQREG 0x07 +#define DMAC_MASKREG 0x87 +#define MASKREG_M0 0x01 +#define MASKREG_M1 0x02 +#define MASKREG_M2 0x04 +#define MASKREG_M3 0x08 + +/* miscellaneous internal variables */ + +#define POD_SPACE(x) ((x) + 0xd0000) +#define MASK_ON (MASKREG_M3|MASKREG_M2|MASKREG_M1|MASKREG_M0) +#define MASK_OFF (MASKREG_M3|MASKREG_M2|MASKREG_M1) + +/* + * SCSI driver phases + */ +typedef enum { + PHASE_IDLE, /* we're not planning on doing anything */ + PHASE_CONNECTING, /* connecting to a target */ + PHASE_CONNECTED, /* connected to a target */ + PHASE_MSGOUT, /* message out to device */ + PHASE_RECONNECTED, /* reconnected */ + PHASE_COMMANDPAUSED, /* command partly sent */ + PHASE_COMMAND, /* command all sent */ + PHASE_DATAOUT, /* data out to device */ + PHASE_DATAIN, /* data in from device */ + PHASE_STATUSIN, /* status in from device */ + PHASE_MSGIN, /* message in from device */ + PHASE_DONE, /* finished */ + PHASE_ABORTED, /* aborted */ + PHASE_DISCONNECT, /* disconnecting */ +} phase_t; + +/* + * After interrupt, what to do now + */ +typedef enum { + INTR_IDLE, /* not expecting another IRQ */ + INTR_NEXT_COMMAND, /* start next command */ + INTR_PROCESSING, /* interrupt routine still processing */ +} intr_ret_t; + +/* + * DMA direction + */ +typedef enum { + DMA_OUT, /* DMA from memory to chip */ + DMA_IN /* DMA from chip to memory */ +} dmadir_t; + +/* + * Synchronous transfer state + */ +typedef enum { /* Synchronous transfer state */ + SYNC_ASYNCHRONOUS, /* don't negociate synchronous transfers*/ + SYNC_NEGOCIATE, /* start negociation */ + SYNC_SENT_REQUEST, /* sent SDTR message */ + SYNC_COMPLETED, /* received SDTR reply */ +} syncxfer_t; + +/* + * Command type + */ +typedef enum { /* command type */ + CMD_READ, /* READ_6, READ_10, READ_12 */ + CMD_WRITE, /* WRITE_6, WRITE_10, WRITE_12 */ + CMD_MISC, /* Others */ +} cmdtype_t; + +/* + * Data phase direction + */ +typedef enum { /* Data direction */ + DATADIR_IN, /* Data in phase expected */ + DATADIR_OUT /* Data out phase expected */ +} datadir_t; + +#include "queue.h" +#include "msgqueue.h" + +#define STATUS_BUFFER_SIZE 32 +/* + * This is used to dump the previous states of the SBIC + */ +struct status_entry { + unsigned long when; + unsigned char ssr; + unsigned char ph; + unsigned char irq; + unsigned char unused; +}; + +#define ADD_STATUS(_q,_ssr,_ph,_irq) \ +({ \ + host->status[(_q)][host->status_ptr[(_q)]].when = jiffies; \ + host->status[(_q)][host->status_ptr[(_q)]].ssr = (_ssr); \ + host->status[(_q)][host->status_ptr[(_q)]].ph = (_ph); \ + host->status[(_q)][host->status_ptr[(_q)]].irq = (_irq); \ + host->status_ptr[(_q)] = (host->status_ptr[(_q)] + 1) & (STATUS_BUFFER_SIZE - 1); \ +}) + +/* + * AcornSCSI host specific data + */ +typedef struct acornscsi_hostdata { + /* miscellaneous */ + struct Scsi_Host *host; /* host */ + Scsi_Cmnd *SCpnt; /* currently processing command */ + Scsi_Cmnd *origSCpnt; /* original connecting command */ + + /* driver information */ + struct { + unsigned int io_port; /* base address of WD33C93 */ + unsigned int irq; /* interrupt */ + phase_t phase; /* current phase */ + + struct { + unsigned char target; /* reconnected target */ + unsigned char lun; /* reconnected lun */ + unsigned char tag; /* reconnected tag */ + } reconnected; + + Scsi_Pointer SCp; /* current commands data pointer */ + + MsgQueue_t msgs; + + unsigned short last_message; /* last message to be sent */ + unsigned char disconnectable:1; /* this command can be disconnected */ + } scsi; + + /* statistics information */ + struct { + unsigned int queues; + unsigned int removes; + unsigned int fins; + unsigned int reads; + unsigned int writes; + unsigned int miscs; + unsigned int disconnects; + unsigned int aborts; + unsigned int resets; + } stats; + + /* queue handling */ + struct { + Queue_t issue; /* issue queue */ + Queue_t disconnected; /* disconnected command queue */ + } queues; + + /* per-device info */ + struct { + unsigned char sync_xfer; /* synchronous transfer (SBIC value) */ + syncxfer_t sync_state; /* sync xfer negociation state */ + unsigned char disconnect_ok:1; /* device can disconnect */ + } device[8]; + unsigned long busyluns[64 / sizeof(unsigned long)];/* array of bits indicating LUNs busy */ + + /* DMA info */ + struct { + unsigned int io_port; /* base address of DMA controller */ + unsigned int io_intr_clear; /* address of DMA interrupt clear */ + unsigned int free_addr; /* next free address */ + unsigned int start_addr; /* start address of current transfer */ + dmadir_t direction; /* dma direction */ + unsigned int transferred; /* number of bytes transferred */ + unsigned int xfer_start; /* scheduled DMA transfer start */ + unsigned int xfer_length; /* scheduled DMA transfer length */ + char *xfer_ptr; /* pointer to area */ + unsigned char xfer_required:1; /* set if we need to transfer something */ + unsigned char xfer_setup:1; /* set if DMA is setup */ + unsigned char xfer_done:1; /* set if DMA reached end of BH list */ + } dma; + + /* card info */ + struct { + unsigned int io_intr; /* base address of interrupt id reg */ + unsigned int io_page; /* base address of page reg */ + unsigned int io_ram; /* base address of RAM access */ + unsigned char page_reg; /* current setting of page reg */ + } card; + + unsigned char status_ptr[9]; + struct status_entry status[9][STATUS_BUFFER_SIZE]; +} AS_Host; + +#endif /* ACORNSCSI_H */ diff --git a/drivers/scsi/arm/arxescsi.c b/drivers/scsi/arm/arxescsi.c new file mode 100644 index 00000000000..29811f5891e --- /dev/null +++ b/drivers/scsi/arm/arxescsi.c @@ -0,0 +1,395 @@ +/* + * linux/arch/arm/drivers/scsi/arxescsi.c + * + * Copyright (C) 1997-2000 Russell King, Stefan Hanske + * + * This driver is based on experimentation. Hence, it may have made + * assumptions about the particular card that I have available, and + * may not be reliable! + * + * Changelog: + * 30-08-1997 RMK 0.0.0 Created, READONLY version as cumana_2.c + * 22-01-1998 RMK 0.0.1 Updated to 2.1.80 + * 15-04-1998 RMK 0.0.1 Only do PIO if FAS216 will allow it. + * 11-06-1998 SH 0.0.2 Changed to support ARXE 16-bit SCSI card + * enabled writing + * 01-01-2000 SH 0.1.0 Added *real* pseudo dma writing + * (arxescsi_pseudo_dma_write) + * 02-04-2000 RMK 0.1.1 Updated for new error handling code. + * 22-10-2000 SH Updated for new registering scheme. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "../scsi.h" +#include +#include "fas216.h" + +struct arxescsi_info { + FAS216_Info info; + struct expansion_card *ec; + void __iomem *base; +}; + +#define DMADATA_OFFSET (0x200) + +#define DMASTAT_OFFSET (0x600) +#define DMASTAT_DRQ (1 << 0) + +#define CSTATUS_IRQ (1 << 0) + +#define VERSION "1.10 (23/01/2003 2.5.57)" + +/* + * Function: int arxescsi_dma_setup(host, SCpnt, direction, min_type) + * Purpose : initialises DMA/PIO + * Params : host - host + * SCpnt - command + * direction - DMA on to/off of card + * min_type - minimum DMA support that we must have for this transfer + * Returns : 0 if we should not set CMD_WITHDMA for transfer info command + */ +static fasdmatype_t +arxescsi_dma_setup(struct Scsi_Host *host, Scsi_Pointer *SCp, + fasdmadir_t direction, fasdmatype_t min_type) +{ + /* + * We don't do real DMA + */ + return fasdma_pseudo; +} + +static void arxescsi_pseudo_dma_write(unsigned char *addr, void __iomem *base) +{ + __asm__ __volatile__( + " stmdb sp!, {r0-r12}\n" + " mov r3, %0\n" + " mov r1, %1\n" + " add r2, r1, #512\n" + " mov r4, #256\n" + ".loop_1: ldmia r3!, {r6, r8, r10, r12}\n" + " mov r5, r6, lsl #16\n" + " mov r7, r8, lsl #16\n" + ".loop_2: ldrb r0, [r1, #1536]\n" + " tst r0, #1\n" + " beq .loop_2\n" + " stmia r2, {r5-r8}\n\t" + " mov r9, r10, lsl #16\n" + " mov r11, r12, lsl #16\n" + ".loop_3: ldrb r0, [r1, #1536]\n" + " tst r0, #1\n" + " beq .loop_3\n" + " stmia r2, {r9-r12}\n" + " subs r4, r4, #16\n" + " bne .loop_1\n" + " ldmia sp!, {r0-r12}\n" + : + : "r" (addr), "r" (base)); +} + +/* + * Function: int arxescsi_dma_pseudo(host, SCpnt, direction, transfer) + * Purpose : handles pseudo DMA + * Params : host - host + * SCpnt - command + * direction - DMA on to/off of card + * transfer - minimum number of bytes we expect to transfer + */ +static void +arxescsi_dma_pseudo(struct Scsi_Host *host, Scsi_Pointer *SCp, + fasdmadir_t direction, int transfer) +{ + struct arxescsi_info *info = (struct arxescsi_info *)host->hostdata; + unsigned int length, error = 0; + void __iomem *base = info->info.scsi.io_base; + unsigned char *addr; + + length = SCp->this_residual; + addr = SCp->ptr; + + if (direction == DMA_OUT) { + unsigned int word; + while (length > 256) { + if (readb(base + 0x80) & STAT_INT) { + error = 1; + break; + } + arxescsi_pseudo_dma_write(addr, base); + addr += 256; + length -= 256; + } + + if (!error) + while (length > 0) { + if (readb(base + 0x80) & STAT_INT) + break; + + if (!(readb(base + DMASTAT_OFFSET) & DMASTAT_DRQ)) + continue; + + word = *addr | *(addr + 1) << 8; + + writew(word, base + DMADATA_OFFSET); + if (length > 1) { + addr += 2; + length -= 2; + } else { + addr += 1; + length -= 1; + } + } + } + else { + if (transfer && (transfer & 255)) { + while (length >= 256) { + if (readb(base + 0x80) & STAT_INT) { + error = 1; + break; + } + + if (!(readb(base + DMASTAT_OFFSET) & DMASTAT_DRQ)) + continue; + + readsw(base + DMADATA_OFFSET, addr, 256 >> 1); + addr += 256; + length -= 256; + } + } + + if (!(error)) + while (length > 0) { + unsigned long word; + + if (readb(base + 0x80) & STAT_INT) + break; + + if (!(readb(base + DMASTAT_OFFSET) & DMASTAT_DRQ)) + continue; + + word = readw(base + DMADATA_OFFSET); + *addr++ = word; + if (--length > 0) { + *addr++ = word >> 8; + length --; + } + } + } +} + +/* + * Function: int arxescsi_dma_stop(host, SCpnt) + * Purpose : stops DMA/PIO + * Params : host - host + * SCpnt - command + */ +static void arxescsi_dma_stop(struct Scsi_Host *host, Scsi_Pointer *SCp) +{ + /* + * no DMA to stop + */ +} + +/* + * Function: const char *arxescsi_info(struct Scsi_Host * host) + * Purpose : returns a descriptive string about this interface, + * Params : host - driver host structure to return info for. + * Returns : pointer to a static buffer containing null terminated string. + */ +static const char *arxescsi_info(struct Scsi_Host *host) +{ + struct arxescsi_info *info = (struct arxescsi_info *)host->hostdata; + static char string[150]; + + sprintf(string, "%s (%s) in slot %d v%s", + host->hostt->name, info->info.scsi.type, info->ec->slot_no, + VERSION); + + return string; +} + +/* + * Function: int arxescsi_proc_info(char *buffer, char **start, off_t offset, + * int length, int host_no, int inout) + * Purpose : Return information about the driver to a user process accessing + * the /proc filesystem. + * Params : buffer - a buffer to write information to + * start - a pointer into this buffer set by this routine to the start + * of the required information. + * offset - offset into information that we have read upto. + * length - length of buffer + * host_no - host number to return information for + * inout - 0 for reading, 1 for writing. + * Returns : length of data written to buffer. + */ +static int +arxescsi_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset, int length, + int inout) +{ + struct arxescsi_info *info; + char *p = buffer; + int pos; + + info = (struct arxescsi_info *)host->hostdata; + if (inout == 1) + return -EINVAL; + + p += sprintf(p, "ARXE 16-bit SCSI driver v%s\n", VERSION); + p += fas216_print_host(&info->info, p); + p += fas216_print_stats(&info->info, p); + p += fas216_print_devices(&info->info, p); + + *start = buffer + offset; + pos = p - buffer - offset; + if (pos > length) + pos = length; + + return pos; +} + +static Scsi_Host_Template arxescsi_template = { + .proc_info = arxescsi_proc_info, + .name = "ARXE SCSI card", + .info = arxescsi_info, + .queuecommand = fas216_noqueue_command, + .eh_host_reset_handler = fas216_eh_host_reset, + .eh_bus_reset_handler = fas216_eh_bus_reset, + .eh_device_reset_handler = fas216_eh_device_reset, + .eh_abort_handler = fas216_eh_abort, + .can_queue = 0, + .this_id = 7, + .sg_tablesize = SG_ALL, + .cmd_per_lun = 1, + .use_clustering = DISABLE_CLUSTERING, + .proc_name = "arxescsi", +}; + +static int __devinit +arxescsi_probe(struct expansion_card *ec, const struct ecard_id *id) +{ + struct Scsi_Host *host; + struct arxescsi_info *info; + unsigned long resbase, reslen; + void __iomem *base; + int ret; + + ret = ecard_request_resources(ec); + if (ret) + goto out; + + resbase = ecard_resource_start(ec, ECARD_RES_MEMC); + reslen = ecard_resource_len(ec, ECARD_RES_MEMC); + base = ioremap(resbase, reslen); + if (!base) { + ret = -ENOMEM; + goto out_region; + } + + host = scsi_host_alloc(&arxescsi_template, sizeof(struct arxescsi_info)); + if (!host) { + ret = -ENOMEM; + goto out_unmap; + } + + info = (struct arxescsi_info *)host->hostdata; + info->ec = ec; + info->base = base; + + info->info.scsi.io_base = base + 0x2000; + info->info.scsi.irq = NO_IRQ; + info->info.scsi.dma = NO_DMA; + info->info.scsi.io_shift = 5; + info->info.ifcfg.clockrate = 24; /* MHz */ + info->info.ifcfg.select_timeout = 255; + info->info.ifcfg.asyncperiod = 200; /* ns */ + info->info.ifcfg.sync_max_depth = 0; + info->info.ifcfg.cntl3 = CNTL3_FASTSCSI | CNTL3_FASTCLK; + info->info.ifcfg.disconnect_ok = 0; + info->info.ifcfg.wide_max_size = 0; + info->info.ifcfg.capabilities = FASCAP_PSEUDODMA; + info->info.dma.setup = arxescsi_dma_setup; + info->info.dma.pseudo = arxescsi_dma_pseudo; + info->info.dma.stop = arxescsi_dma_stop; + + ec->irqaddr = base; + ec->irqmask = CSTATUS_IRQ; + + ret = fas216_init(host); + if (ret) + goto out_unregister; + + ret = fas216_add(host, &ec->dev); + if (ret == 0) + goto out; + + fas216_release(host); + out_unregister: + scsi_host_put(host); + out_unmap: + iounmap(base); + out_region: + ecard_release_resources(ec); + out: + return ret; +} + +static void __devexit arxescsi_remove(struct expansion_card *ec) +{ + struct Scsi_Host *host = ecard_get_drvdata(ec); + struct arxescsi_info *info = (struct arxescsi_info *)host->hostdata; + + ecard_set_drvdata(ec, NULL); + fas216_remove(host); + + iounmap(info->base); + + fas216_release(host); + scsi_host_put(host); + ecard_release_resources(ec); +} + +static const struct ecard_id arxescsi_cids[] = { + { MANU_ARXE, PROD_ARXE_SCSI }, + { 0xffff, 0xffff }, +}; + +static struct ecard_driver arxescsi_driver = { + .probe = arxescsi_probe, + .remove = __devexit_p(arxescsi_remove), + .id_table = arxescsi_cids, + .drv = { + .name = "arxescsi", + }, +}; + +static int __init init_arxe_scsi_driver(void) +{ + return ecard_register_driver(&arxescsi_driver); +} + +static void __exit exit_arxe_scsi_driver(void) +{ + ecard_remove_driver(&arxescsi_driver); +} + +module_init(init_arxe_scsi_driver); +module_exit(exit_arxe_scsi_driver); + +MODULE_AUTHOR("Stefan Hanske"); +MODULE_DESCRIPTION("ARXESCSI driver for Acorn machines"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/scsi/arm/cumana_1.c b/drivers/scsi/arm/cumana_1.c new file mode 100644 index 00000000000..27271bfc01d --- /dev/null +++ b/drivers/scsi/arm/cumana_1.c @@ -0,0 +1,357 @@ +/* + * Generic Generic NCR5380 driver + * + * Copyright 1995-2002, Russell King + */ +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "../scsi.h" +#include + +#include + +#define AUTOSENSE +#define PSEUDO_DMA + +#define CUMANASCSI_PUBLIC_RELEASE 1 + +#define NCR5380_implementation_fields int port, ctrl +#define NCR5380_local_declare() struct Scsi_Host *_instance +#define NCR5380_setup(instance) _instance = instance +#define NCR5380_read(reg) cumanascsi_read(_instance, reg) +#define NCR5380_write(reg, value) cumanascsi_write(_instance, reg, value) +#define NCR5380_intr cumanascsi_intr +#define NCR5380_queue_command cumanascsi_queue_command +#define NCR5380_proc_info cumanascsi_proc_info + +#define BOARD_NORMAL 0 +#define BOARD_NCR53C400 1 + +#include "../NCR5380.h" + +void cumanascsi_setup(char *str, int *ints) +{ +} + +const char *cumanascsi_info(struct Scsi_Host *spnt) +{ + return ""; +} + +#ifdef NOT_EFFICIENT +#define CTRL(p,v) outb(*ctrl = (v), (p) - 577) +#define STAT(p) inb((p)+1) +#define IN(p) inb((p)) +#define OUT(v,p) outb((v), (p)) +#else +#define CTRL(p,v) (p[-2308] = (*ctrl = (v))) +#define STAT(p) (p[4]) +#define IN(p) (*(p)) +#define IN2(p) ((unsigned short)(*(volatile unsigned long *)(p))) +#define OUT(v,p) (*(p) = (v)) +#define OUT2(v,p) (*((volatile unsigned long *)(p)) = (v)) +#endif +#define L(v) (((v)<<16)|((v) & 0x0000ffff)) +#define H(v) (((v)>>16)|((v) & 0xffff0000)) + +static inline int +NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *addr, int len) +{ + int *ctrl = &((struct NCR5380_hostdata *)instance->hostdata)->ctrl; + int oldctrl = *ctrl; + unsigned long *laddr; +#ifdef NOT_EFFICIENT + int iobase = instance->io_port; + int dma_io = iobase & ~(0x3C0000>>2); +#else + volatile unsigned char *iobase = (unsigned char *)ioaddr(instance->io_port); + volatile unsigned char *dma_io = (unsigned char *)((int)iobase & ~0x3C0000); +#endif + + if(!len) return 0; + + CTRL(iobase, 0x02); + laddr = (unsigned long *)addr; + while(len >= 32) + { + int status; + unsigned long v; + status = STAT(iobase); + if(status & 0x80) + goto end; + if(!(status & 0x40)) + continue; + v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io); + v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io); + v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io); + v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io); + v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io); + v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io); + v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io); + v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io); + len -= 32; + if(len == 0) + break; + } + + addr = (unsigned char *)laddr; + CTRL(iobase, 0x12); + while(len > 0) + { + int status; + status = STAT(iobase); + if(status & 0x80) + goto end; + if(status & 0x40) + { + OUT(*addr++, dma_io); + if(--len == 0) + break; + } + + status = STAT(iobase); + if(status & 0x80) + goto end; + if(status & 0x40) + { + OUT(*addr++, dma_io); + if(--len == 0) + break; + } + } +end: + CTRL(iobase, oldctrl|0x40); + return len; +} + +static inline int +NCR5380_pread(struct Scsi_Host *instance, unsigned char *addr, int len) +{ + int *ctrl = &((struct NCR5380_hostdata *)instance->hostdata)->ctrl; + int oldctrl = *ctrl; + unsigned long *laddr; +#ifdef NOT_EFFICIENT + int iobase = instance->io_port; + int dma_io = iobase & ~(0x3C0000>>2); +#else + volatile unsigned char *iobase = (unsigned char *)ioaddr(instance->io_port); + volatile unsigned char *dma_io = (unsigned char *)((int)iobase & ~0x3C0000); +#endif + + if(!len) return 0; + + CTRL(iobase, 0x00); + laddr = (unsigned long *)addr; + while(len >= 32) + { + int status; + status = STAT(iobase); + if(status & 0x80) + goto end; + if(!(status & 0x40)) + continue; + *laddr++ = IN2(dma_io)|(IN2(dma_io)<<16); + *laddr++ = IN2(dma_io)|(IN2(dma_io)<<16); + *laddr++ = IN2(dma_io)|(IN2(dma_io)<<16); + *laddr++ = IN2(dma_io)|(IN2(dma_io)<<16); + *laddr++ = IN2(dma_io)|(IN2(dma_io)<<16); + *laddr++ = IN2(dma_io)|(IN2(dma_io)<<16); + *laddr++ = IN2(dma_io)|(IN2(dma_io)<<16); + *laddr++ = IN2(dma_io)|(IN2(dma_io)<<16); + len -= 32; + if(len == 0) + break; + } + + addr = (unsigned char *)laddr; + CTRL(iobase, 0x10); + while(len > 0) + { + int status; + status = STAT(iobase); + if(status & 0x80) + goto end; + if(status & 0x40) + { + *addr++ = IN(dma_io); + if(--len == 0) + break; + } + + status = STAT(iobase); + if(status & 0x80) + goto end; + if(status & 0x40) + { + *addr++ = IN(dma_io); + if(--len == 0) + break; + } + } +end: + CTRL(iobase, oldctrl|0x40); + return len; +} + +#undef STAT +#undef CTRL +#undef IN +#undef OUT + +#define CTRL(p,v) outb(*ctrl = (v), (p) - 577) + +static char cumanascsi_read(struct Scsi_Host *instance, int reg) +{ + unsigned int iobase = instance->io_port; + int i; + int *ctrl = &((struct NCR5380_hostdata *)instance->hostdata)->ctrl; + + CTRL(iobase, 0); + i = inb(iobase + 64 + reg); + CTRL(iobase, 0x40); + + return i; +} + +static void cumanascsi_write(struct Scsi_Host *instance, int reg, int value) +{ + int iobase = instance->io_port; + int *ctrl = &((struct NCR5380_hostdata *)instance->hostdata)->ctrl; + + CTRL(iobase, 0); + outb(value, iobase + 64 + reg); + CTRL(iobase, 0x40); +} + +#undef CTRL + +#include "../NCR5380.c" + +static Scsi_Host_Template cumanascsi_template = { + .module = THIS_MODULE, + .name = "Cumana 16-bit SCSI", + .info = cumanascsi_info, + .queuecommand = cumanascsi_queue_command, + .eh_abort_handler = NCR5380_abort, + .eh_device_reset_handler= NCR5380_device_reset, + .eh_bus_reset_handler = NCR5380_bus_reset, + .eh_host_reset_handler = NCR5380_host_reset, + .can_queue = 16, + .this_id = 7, + .sg_tablesize = SG_ALL, + .cmd_per_lun = 2, + .unchecked_isa_dma = 0, + .use_clustering = DISABLE_CLUSTERING, + .proc_name = "CumanaSCSI-1", +}; + +static int __devinit +cumanascsi1_probe(struct expansion_card *ec, const struct ecard_id *id) +{ + struct Scsi_Host *host; + int ret = -ENOMEM; + + host = scsi_host_alloc(&cumanascsi_template, sizeof(struct NCR5380_hostdata)); + if (!host) + goto out; + + host->io_port = ecard_address(ec, ECARD_IOC, ECARD_SLOW) + 0x800; + host->irq = ec->irq; + + NCR5380_init(host, 0); + + host->n_io_port = 255; + if (!(request_region(host->io_port, host->n_io_port, "CumanaSCSI-1"))) { + ret = -EBUSY; + goto out_free; + } + + ((struct NCR5380_hostdata *)host->hostdata)->ctrl = 0; + outb(0x00, host->io_port - 577); + + ret = request_irq(host->irq, cumanascsi_intr, SA_INTERRUPT, + "CumanaSCSI-1", host); + if (ret) { + printk("scsi%d: IRQ%d not free: %d\n", + host->host_no, host->irq, ret); + goto out_release; + } + + printk("scsi%d: at port 0x%08lx irq %d", + host->host_no, host->io_port, host->irq); + printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d", + host->can_queue, host->cmd_per_lun, CUMANASCSI_PUBLIC_RELEASE); + printk("\nscsi%d:", host->host_no); + NCR5380_print_options(host); + printk("\n"); + + ret = scsi_add_host(host, &ec->dev); + if (ret) + goto out_free_irq; + + scsi_scan_host(host); + goto out; + + out_free_irq: + free_irq(host->irq, host); + out_release: + release_region(host->io_port, host->n_io_port); + out_free: + scsi_host_put(host); + out: + return ret; +} + +static void __devexit cumanascsi1_remove(struct expansion_card *ec) +{ + struct Scsi_Host *host = ecard_get_drvdata(ec); + + ecard_set_drvdata(ec, NULL); + + scsi_remove_host(host); + free_irq(host->irq, host); + NCR5380_exit(host); + release_region(host->io_port, host->n_io_port); + scsi_host_put(host); +} + +static const struct ecard_id cumanascsi1_cids[] = { + { MANU_CUMANA, PROD_CUMANA_SCSI_1 }, + { 0xffff, 0xffff } +}; + +static struct ecard_driver cumanascsi1_driver = { + .probe = cumanascsi1_probe, + .remove = __devexit_p(cumanascsi1_remove), + .id_table = cumanascsi1_cids, + .drv = { + .name = "cumanascsi1", + }, +}; + +static int __init cumanascsi_init(void) +{ + return ecard_register_driver(&cumanascsi1_driver); +} + +static void __exit cumanascsi_exit(void) +{ + ecard_remove_driver(&cumanascsi1_driver); +} + +module_init(cumanascsi_init); +module_exit(cumanascsi_exit); + +MODULE_DESCRIPTION("Cumana SCSI-1 driver for Acorn machines"); +MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/arm/cumana_2.c b/drivers/scsi/arm/cumana_2.c new file mode 100644 index 00000000000..0ef0644eeb2 --- /dev/null +++ b/drivers/scsi/arm/cumana_2.c @@ -0,0 +1,556 @@ +/* + * linux/drivers/acorn/scsi/cumana_2.c + * + * Copyright (C) 1997-2005 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: + * 30-08-1997 RMK 0.0.0 Created, READONLY version. + * 22-01-1998 RMK 0.0.1 Updated to 2.1.80. + * 15-04-1998 RMK 0.0.1 Only do PIO if FAS216 will allow it. + * 02-05-1998 RMK 0.0.2 Updated & added DMA support. + * 27-06-1998 RMK Changed asm/delay.h to linux/delay.h + * 18-08-1998 RMK 0.0.3 Fixed synchronous transfer depth. + * 02-04-2000 RMK 0.0.4 Updated for new error handling code. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "../scsi.h" +#include +#include "fas216.h" +#include "scsi.h" + +#include + +#define CUMANASCSI2_STATUS (0x0000) +#define STATUS_INT (1 << 0) +#define STATUS_DRQ (1 << 1) +#define STATUS_LATCHED (1 << 3) + +#define CUMANASCSI2_ALATCH (0x0014) +#define ALATCH_ENA_INT (3) +#define ALATCH_DIS_INT (2) +#define ALATCH_ENA_TERM (5) +#define ALATCH_DIS_TERM (4) +#define ALATCH_ENA_BIT32 (11) +#define ALATCH_DIS_BIT32 (10) +#define ALATCH_ENA_DMA (13) +#define ALATCH_DIS_DMA (12) +#define ALATCH_DMA_OUT (15) +#define ALATCH_DMA_IN (14) + +#define CUMANASCSI2_PSEUDODMA (0x0200) + +#define CUMANASCSI2_FAS216_OFFSET (0x0300) +#define CUMANASCSI2_FAS216_SHIFT 2 + +/* + * Version + */ +#define VERSION "1.00 (13/11/2002 2.5.47)" + +/* + * Use term=0,1,0,0,0 to turn terminators on/off + */ +static int term[MAX_ECARDS] = { 1, 1, 1, 1, 1, 1, 1, 1 }; + +#define NR_SG 256 + +struct cumanascsi2_info { + FAS216_Info info; + struct expansion_card *ec; + void __iomem *base; + unsigned int terms; /* Terminator state */ + struct scatterlist sg[NR_SG]; /* Scatter DMA list */ +}; + +#define CSTATUS_IRQ (1 << 0) +#define CSTATUS_DRQ (1 << 1) + +/* Prototype: void cumanascsi_2_irqenable(ec, irqnr) + * Purpose : Enable interrupts on Cumana SCSI 2 card + * Params : ec - expansion card structure + * : irqnr - interrupt number + */ +static void +cumanascsi_2_irqenable(struct expansion_card *ec, int irqnr) +{ + struct cumanascsi2_info *info = ec->irq_data; + writeb(ALATCH_ENA_INT, info->base + CUMANASCSI2_ALATCH); +} + +/* Prototype: void cumanascsi_2_irqdisable(ec, irqnr) + * Purpose : Disable interrupts on Cumana SCSI 2 card + * Params : ec - expansion card structure + * : irqnr - interrupt number + */ +static void +cumanascsi_2_irqdisable(struct expansion_card *ec, int irqnr) +{ + struct cumanascsi2_info *info = ec->irq_data; + writeb(ALATCH_DIS_INT, info->base + CUMANASCSI2_ALATCH); +} + +static const expansioncard_ops_t cumanascsi_2_ops = { + .irqenable = cumanascsi_2_irqenable, + .irqdisable = cumanascsi_2_irqdisable, +}; + +/* Prototype: void cumanascsi_2_terminator_ctl(host, on_off) + * Purpose : Turn the Cumana SCSI 2 terminators on or off + * Params : host - card to turn on/off + * : on_off - !0 to turn on, 0 to turn off + */ +static void +cumanascsi_2_terminator_ctl(struct Scsi_Host *host, int on_off) +{ + struct cumanascsi2_info *info = (struct cumanascsi2_info *)host->hostdata; + + if (on_off) { + info->terms = 1; + writeb(ALATCH_ENA_TERM, info->base + CUMANASCSI2_ALATCH); + } else { + info->terms = 0; + writeb(ALATCH_DIS_TERM, info->base + CUMANASCSI2_ALATCH); + } +} + +/* Prototype: void cumanascsi_2_intr(irq, *dev_id, *regs) + * Purpose : handle interrupts from Cumana SCSI 2 card + * Params : irq - interrupt number + * dev_id - user-defined (Scsi_Host structure) + * regs - processor registers at interrupt + */ +static irqreturn_t +cumanascsi_2_intr(int irq, void *dev_id, struct pt_regs *regs) +{ + struct cumanascsi2_info *info = dev_id; + + return fas216_intr(&info->info); +} + +/* Prototype: fasdmatype_t cumanascsi_2_dma_setup(host, SCpnt, direction, min_type) + * Purpose : initialises DMA/PIO + * Params : host - host + * SCpnt - command + * direction - DMA on to/off of card + * min_type - minimum DMA support that we must have for this transfer + * Returns : type of transfer to be performed + */ +static fasdmatype_t +cumanascsi_2_dma_setup(struct Scsi_Host *host, Scsi_Pointer *SCp, + fasdmadir_t direction, fasdmatype_t min_type) +{ + struct cumanascsi2_info *info = (struct cumanascsi2_info *)host->hostdata; + struct device *dev = scsi_get_device(host); + int dmach = info->info.scsi.dma; + + writeb(ALATCH_DIS_DMA, info->base + CUMANASCSI2_ALATCH); + + if (dmach != NO_DMA && + (min_type == fasdma_real_all || SCp->this_residual >= 512)) { + int bufs, map_dir, dma_dir, alatch_dir; + + bufs = copy_SCp_to_sg(&info->sg[0], SCp, NR_SG); + + if (direction == DMA_OUT) + map_dir = DMA_TO_DEVICE, + dma_dir = DMA_MODE_WRITE, + alatch_dir = ALATCH_DMA_OUT; + else + map_dir = DMA_FROM_DEVICE, + dma_dir = DMA_MODE_READ, + alatch_dir = ALATCH_DMA_IN; + + dma_map_sg(dev, info->sg, bufs + 1, map_dir); + + disable_dma(dmach); + set_dma_sg(dmach, info->sg, bufs + 1); + writeb(alatch_dir, info->base + CUMANASCSI2_ALATCH); + set_dma_mode(dmach, dma_dir); + enable_dma(dmach); + writeb(ALATCH_ENA_DMA, info->base + CUMANASCSI2_ALATCH); + writeb(ALATCH_DIS_BIT32, info->base + CUMANASCSI2_ALATCH); + return fasdma_real_all; + } + + /* + * If we're not doing DMA, + * we'll do pseudo DMA + */ + return fasdma_pio; +} + +/* + * Prototype: void cumanascsi_2_dma_pseudo(host, SCpnt, direction, transfer) + * Purpose : handles pseudo DMA + * Params : host - host + * SCpnt - command + * direction - DMA on to/off of card + * transfer - minimum number of bytes we expect to transfer + */ +static void +cumanascsi_2_dma_pseudo(struct Scsi_Host *host, Scsi_Pointer *SCp, + fasdmadir_t direction, int transfer) +{ + struct cumanascsi2_info *info = (struct cumanascsi2_info *)host->hostdata; + unsigned int length; + unsigned char *addr; + + length = SCp->this_residual; + addr = SCp->ptr; + + if (direction == DMA_OUT) +#if 0 + while (length > 1) { + unsigned long word; + unsigned int status = readb(info->base + CUMANASCSI2_STATUS); + + if (status & STATUS_INT) + goto end; + + if (!(status & STATUS_DRQ)) + continue; + + word = *addr | *(addr + 1) << 8; + writew(word, info->base + CUMANASCSI2_PSEUDODMA); + addr += 2; + length -= 2; + } +#else + printk ("PSEUDO_OUT???\n"); +#endif + else { + if (transfer && (transfer & 255)) { + while (length >= 256) { + unsigned int status = readb(info->base + CUMANASCSI2_STATUS); + + if (status & STATUS_INT) + return; + + if (!(status & STATUS_DRQ)) + continue; + + readsw(info->base + CUMANASCSI2_PSEUDODMA, + addr, 256 >> 1); + addr += 256; + length -= 256; + } + } + + while (length > 0) { + unsigned long word; + unsigned int status = readb(info->base + CUMANASCSI2_STATUS); + + if (status & STATUS_INT) + return; + + if (!(status & STATUS_DRQ)) + continue; + + word = readw(info->base + CUMANASCSI2_PSEUDODMA); + *addr++ = word; + if (--length > 0) { + *addr++ = word >> 8; + length --; + } + } + } +} + +/* Prototype: int cumanascsi_2_dma_stop(host, SCpnt) + * Purpose : stops DMA/PIO + * Params : host - host + * SCpnt - command + */ +static void +cumanascsi_2_dma_stop(struct Scsi_Host *host, Scsi_Pointer *SCp) +{ + struct cumanascsi2_info *info = (struct cumanascsi2_info *)host->hostdata; + if (info->info.scsi.dma != NO_DMA) { + writeb(ALATCH_DIS_DMA, info->base + CUMANASCSI2_ALATCH); + disable_dma(info->info.scsi.dma); + } +} + +/* Prototype: const char *cumanascsi_2_info(struct Scsi_Host * host) + * Purpose : returns a descriptive string about this interface, + * Params : host - driver host structure to return info for. + * Returns : pointer to a static buffer containing null terminated string. + */ +const char *cumanascsi_2_info(struct Scsi_Host *host) +{ + struct cumanascsi2_info *info = (struct cumanascsi2_info *)host->hostdata; + static char string[150]; + + sprintf(string, "%s (%s) in slot %d v%s terminators o%s", + host->hostt->name, info->info.scsi.type, info->ec->slot_no, + VERSION, info->terms ? "n" : "ff"); + + return string; +} + +/* Prototype: int cumanascsi_2_set_proc_info(struct Scsi_Host *host, char *buffer, int length) + * Purpose : Set a driver specific function + * Params : host - host to setup + * : buffer - buffer containing string describing operation + * : length - length of string + * Returns : -EINVAL, or 0 + */ +static int +cumanascsi_2_set_proc_info(struct Scsi_Host *host, char *buffer, int length) +{ + int ret = length; + + if (length >= 11 && strcmp(buffer, "CUMANASCSI2") == 0) { + buffer += 11; + length -= 11; + + if (length >= 5 && strncmp(buffer, "term=", 5) == 0) { + if (buffer[5] == '1') + cumanascsi_2_terminator_ctl(host, 1); + else if (buffer[5] == '0') + cumanascsi_2_terminator_ctl(host, 0); + else + ret = -EINVAL; + } else + ret = -EINVAL; + } else + ret = -EINVAL; + + return ret; +} + +/* Prototype: int cumanascsi_2_proc_info(char *buffer, char **start, off_t offset, + * int length, int host_no, int inout) + * Purpose : Return information about the driver to a user process accessing + * the /proc filesystem. + * Params : buffer - a buffer to write information to + * start - a pointer into this buffer set by this routine to the start + * of the required information. + * offset - offset into information that we have read upto. + * length - length of buffer + * host_no - host number to return information for + * inout - 0 for reading, 1 for writing. + * Returns : length of data written to buffer. + */ +int cumanascsi_2_proc_info (struct Scsi_Host *host, char *buffer, char **start, off_t offset, + int length, int inout) +{ + struct cumanascsi2_info *info; + char *p = buffer; + int pos; + + if (inout == 1) + return cumanascsi_2_set_proc_info(host, buffer, length); + + info = (struct cumanascsi2_info *)host->hostdata; + + p += sprintf(p, "Cumana SCSI II driver v%s\n", VERSION); + p += fas216_print_host(&info->info, p); + p += sprintf(p, "Term : o%s\n", + info->terms ? "n" : "ff"); + + p += fas216_print_stats(&info->info, p); + p += fas216_print_devices(&info->info, p); + + *start = buffer + offset; + pos = p - buffer - offset; + if (pos > length) + pos = length; + + return pos; +} + +static Scsi_Host_Template cumanascsi2_template = { + .module = THIS_MODULE, + .proc_info = cumanascsi_2_proc_info, + .name = "Cumana SCSI II", + .info = cumanascsi_2_info, + .queuecommand = fas216_queue_command, + .eh_host_reset_handler = fas216_eh_host_reset, + .eh_bus_reset_handler = fas216_eh_bus_reset, + .eh_device_reset_handler = fas216_eh_device_reset, + .eh_abort_handler = fas216_eh_abort, + .can_queue = 1, + .this_id = 7, + .sg_tablesize = SG_ALL, + .cmd_per_lun = 1, + .use_clustering = DISABLE_CLUSTERING, + .proc_name = "cumanascsi2", +}; + +static int __devinit +cumanascsi2_probe(struct expansion_card *ec, const struct ecard_id *id) +{ + struct Scsi_Host *host; + struct cumanascsi2_info *info; + unsigned long resbase, reslen; + void __iomem *base; + int ret; + + ret = ecard_request_resources(ec); + if (ret) + goto out; + + resbase = ecard_resource_start(ec, ECARD_RES_MEMC); + reslen = ecard_resource_len(ec, ECARD_RES_MEMC); + base = ioremap(resbase, reslen); + if (!base) { + ret = -ENOMEM; + goto out_region; + } + + host = scsi_host_alloc(&cumanascsi2_template, + sizeof(struct cumanascsi2_info)); + if (!host) { + ret = -ENOMEM; + goto out_unmap; + } + + ecard_set_drvdata(ec, host); + + info = (struct cumanascsi2_info *)host->hostdata; + info->ec = ec; + info->base = base; + + cumanascsi_2_terminator_ctl(host, term[ec->slot_no]); + + info->info.scsi.io_base = base + CUMANASCSI2_FAS216_OFFSET; + info->info.scsi.io_shift = CUMANASCSI2_FAS216_SHIFT; + info->info.scsi.irq = ec->irq; + info->info.scsi.dma = ec->dma; + info->info.ifcfg.clockrate = 40; /* MHz */ + info->info.ifcfg.select_timeout = 255; + info->info.ifcfg.asyncperiod = 200; /* ns */ + info->info.ifcfg.sync_max_depth = 7; + info->info.ifcfg.cntl3 = CNTL3_BS8 | CNTL3_FASTSCSI | CNTL3_FASTCLK; + info->info.ifcfg.disconnect_ok = 1; + info->info.ifcfg.wide_max_size = 0; + info->info.ifcfg.capabilities = FASCAP_PSEUDODMA; + info->info.dma.setup = cumanascsi_2_dma_setup; + info->info.dma.pseudo = cumanascsi_2_dma_pseudo; + info->info.dma.stop = cumanascsi_2_dma_stop; + + ec->irqaddr = info->base + CUMANASCSI2_STATUS; + ec->irqmask = STATUS_INT; + ec->irq_data = info; + ec->ops = &cumanascsi_2_ops; + + ret = fas216_init(host); + if (ret) + goto out_free; + + ret = request_irq(ec->irq, cumanascsi_2_intr, + SA_INTERRUPT, "cumanascsi2", info); + if (ret) { + printk("scsi%d: IRQ%d not free: %d\n", + host->host_no, ec->irq, ret); + goto out_release; + } + + if (info->info.scsi.dma != NO_DMA) { + if (request_dma(info->info.scsi.dma, "cumanascsi2")) { + printk("scsi%d: DMA%d not free, using PIO\n", + host->host_no, info->info.scsi.dma); + info->info.scsi.dma = NO_DMA; + } else { + set_dma_speed(info->info.scsi.dma, 180); + info->info.ifcfg.capabilities |= FASCAP_DMA; + } + } + + ret = fas216_add(host, &ec->dev); + if (ret == 0) + goto out; + + if (info->info.scsi.dma != NO_DMA) + free_dma(info->info.scsi.dma); + free_irq(ec->irq, host); + + out_release: + fas216_release(host); + + out_free: + scsi_host_put(host); + + out_unmap: + iounmap(base); + + out_region: + ecard_release_resources(ec); + + out: + return ret; +} + +static void __devexit cumanascsi2_remove(struct expansion_card *ec) +{ + struct Scsi_Host *host = ecard_get_drvdata(ec); + struct cumanascsi2_info *info = (struct cumanascsi2_info *)host->hostdata; + + ecard_set_drvdata(ec, NULL); + fas216_remove(host); + + if (info->info.scsi.dma != NO_DMA) + free_dma(info->info.scsi.dma); + free_irq(ec->irq, info); + + iounmap(info->base); + + fas216_release(host); + scsi_host_put(host); + ecard_release_resources(ec); +} + +static const struct ecard_id cumanascsi2_cids[] = { + { MANU_CUMANA, PROD_CUMANA_SCSI_2 }, + { 0xffff, 0xffff }, +}; + +static struct ecard_driver cumanascsi2_driver = { + .probe = cumanascsi2_probe, + .remove = __devexit_p(cumanascsi2_remove), + .id_table = cumanascsi2_cids, + .drv = { + .name = "cumanascsi2", + }, +}; + +static int __init cumanascsi2_init(void) +{ + return ecard_register_driver(&cumanascsi2_driver); +} + +static void __exit cumanascsi2_exit(void) +{ + ecard_remove_driver(&cumanascsi2_driver); +} + +module_init(cumanascsi2_init); +module_exit(cumanascsi2_exit); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("Cumana SCSI-2 driver for Acorn machines"); +MODULE_PARM(term, "1-8i"); +MODULE_PARM_DESC(term, "SCSI bus termination"); +MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/arm/ecoscsi.c b/drivers/scsi/arm/ecoscsi.c new file mode 100644 index 00000000000..303648a8470 --- /dev/null +++ b/drivers/scsi/arm/ecoscsi.c @@ -0,0 +1,239 @@ +#define AUTOSENSE +/* #define PSEUDO_DMA */ + +/* + * EcoSCSI Generic NCR5380 driver + * + * Copyright 1995, Russell King + * + * ALPHA RELEASE 1. + * + * For more information, please consult + * + * NCR 5380 Family + * SCSI Protocol Controller + * Databook + * + * NCR Microelectronics + * 1635 Aeroplaza Drive + * Colorado Springs, CO 80916 + * 1+ (719) 578-3400 + * 1+ (800) 334-5454 + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "../scsi.h" +#include + +#define NCR5380_implementation_fields int port, ctrl +#define NCR5380_local_declare() struct Scsi_Host *_instance +#define NCR5380_setup(instance) _instance = instance + +#define NCR5380_read(reg) ecoscsi_read(_instance, reg) +#define NCR5380_write(reg, value) ecoscsi_write(_instance, reg, value) + +#define NCR5380_intr ecoscsi_intr +#define NCR5380_queue_command ecoscsi_queue_command +#define NCR5380_proc_info ecoscsi_proc_info + +#include "../NCR5380.h" + +#define ECOSCSI_PUBLIC_RELEASE 1 + +static char ecoscsi_read(struct Scsi_Host *instance, int reg) +{ + int iobase = instance->io_port; + outb(reg | 8, iobase); + return inb(iobase + 1); +} + +static void ecoscsi_write(struct Scsi_Host *instance, int reg, int value) +{ + int iobase = instance->io_port; + outb(reg | 8, iobase); + outb(value, iobase + 1); +} + +/* + * Function : ecoscsi_setup(char *str, int *ints) + * + * Purpose : LILO command line initialization of the overrides array, + * + * Inputs : str - unused, ints - array of integer parameters with ints[0] + * equal to the number of ints. + * + */ + +void ecoscsi_setup(char *str, int *ints) +{ +} + +const char * ecoscsi_info (struct Scsi_Host *spnt) +{ + return ""; +} + +#if 0 +#define STAT(p) inw(p + 144) + +static inline int NCR5380_pwrite(struct Scsi_Host *host, unsigned char *addr, + int len) +{ + int iobase = host->io_port; +printk("writing %p len %d\n",addr, len); + if(!len) return -1; + + while(1) + { + int status; + while(((status = STAT(iobase)) & 0x100)==0); + } +} + +static inline int NCR5380_pread(struct Scsi_Host *host, unsigned char *addr, + int len) +{ + int iobase = host->io_port; + int iobase2= host->io_port + 0x100; + unsigned char *start = addr; + int s; +printk("reading %p len %d\n",addr, len); + outb(inb(iobase + 128), iobase + 135); + while(len > 0) + { + int status,b,i, timeout; + timeout = 0x07FFFFFF; + while(((status = STAT(iobase)) & 0x100)==0) + { + timeout--; + if(status & 0x200 || !timeout) + { + printk("status = %p\n",status); + outb(0, iobase + 135); + return 1; + } + } + if(len >= 128) + { + for(i=0; i<64; i++) + { + b = inw(iobase + 136); + *addr++ = b; + *addr++ = b>>8; + } + len -= 128; + } + else + { + b = inw(iobase + 136); + *addr ++ = b; + len -= 1; + if(len) + *addr ++ = b>>8; + len -= 1; + } + } + outb(0, iobase + 135); + printk("first bytes = %02X %02X %02X %20X %02X %02X %02X\n",*start, start[1], start[2], start[3], start[4], start[5], start[6]); + return 1; +} +#endif +#undef STAT + +#define BOARD_NORMAL 0 +#define BOARD_NCR53C400 1 + +#include "../NCR5380.c" + +static Scsi_Host_Template ecoscsi_template = { + .module = THIS_MODULE, + .name = "Serial Port EcoSCSI NCR5380", + .proc_name = "ecoscsi", + .info = ecoscsi_info, + .queuecommand = ecoscsi_queue_command, + .eh_abort_handler = NCR5380_abort, + .eh_device_reset_handler= NCR5380_device_reset, + .eh_bus_reset_handler = NCR5380_bus_reset, + .eh_host_reset_handler = NCR5380_host_reset, + .can_queue = 16, + .this_id = 7, + .sg_tablesize = SG_ALL, + .cmd_per_lun = 2, + .use_clustering = DISABLE_CLUSTERING +}; + +static struct Scsi_Host *host; + +static int __init ecoscsi_init(void) +{ + + host = scsi_host_alloc(tpnt, sizeof(struct NCR5380_hostdata)); + if (!host) + return 0; + + host->io_port = 0x80ce8000; + host->n_io_port = 144; + host->irq = IRQ_NONE; + + if (!(request_region(host->io_port, host->n_io_port, "ecoscsi")) ) + goto unregister_scsi; + + ecoscsi_write(host, MODE_REG, 0x20); /* Is it really SCSI? */ + if (ecoscsi_read(host, MODE_REG) != 0x20) /* Write to a reg. */ + goto release_reg; + + ecoscsi_write(host, MODE_REG, 0x00 ); /* it back. */ + if (ecoscsi_read(host, MODE_REG) != 0x00) + goto release_reg; + + NCR5380_init(host, 0); + + printk("scsi%d: at port 0x%08lx irqs disabled", host->host_no, host->io_port); + printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d", + host->can_queue, host->cmd_per_lun, ECOSCSI_PUBLIC_RELEASE); + printk("\nscsi%d:", host->host_no); + NCR5380_print_options(host); + printk("\n"); + + scsi_add_host(host, NULL); /* XXX handle failure */ + scsi_scan_host(host); + return 0; + +release_reg: + release_region(host->io_port, host->n_io_port); +unregister_scsi: + scsi_host_put(host); + return -ENODEV; +} + +static void __exit ecoscsi_exit(void) +{ + scsi_remove_host(host); + + if (shpnt->irq != IRQ_NONE) + free_irq(shpnt->irq, NULL); + NCR5380_exit(host); + if (shpnt->io_port) + release_region(shpnt->io_port, shpnt->n_io_port); + + scsi_host_put(host); + return 0; +} + +module_init(ecoscsi_init); +module_exit(ecoscsi_exit); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("Econet-SCSI driver for Acorn machines"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/scsi/arm/eesox.c b/drivers/scsi/arm/eesox.c new file mode 100644 index 00000000000..78b7e543471 --- /dev/null +++ b/drivers/scsi/arm/eesox.c @@ -0,0 +1,680 @@ +/* + * linux/drivers/acorn/scsi/eesox.c + * + * Copyright (C) 1997-2005 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This driver is based on experimentation. Hence, it may have made + * assumptions about the particular card that I have available, and + * may not be reliable! + * + * Changelog: + * 01-10-1997 RMK Created, READONLY version + * 15-02-1998 RMK READ/WRITE version + * added DMA support and hardware definitions + * 14-03-1998 RMK Updated DMA support + * Added terminator control + * 15-04-1998 RMK Only do PIO if FAS216 will allow it. + * 27-06-1998 RMK Changed asm/delay.h to linux/delay.h + * 02-04-2000 RMK 0.0.3 Fixed NO_IRQ/NO_DMA problem, updated for new + * error handling code. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "../scsi.h" +#include +#include "fas216.h" +#include "scsi.h" + +#include + +#define EESOX_FAS216_OFFSET 0x3000 +#define EESOX_FAS216_SHIFT 5 + +#define EESOX_DMASTAT 0x2800 +#define EESOX_STAT_INTR 0x01 +#define EESOX_STAT_DMA 0x02 + +#define EESOX_CONTROL 0x2800 +#define EESOX_INTR_ENABLE 0x04 +#define EESOX_TERM_ENABLE 0x02 +#define EESOX_RESET 0x01 + +#define EESOX_DMADATA 0x3800 + +#define VERSION "1.10 (17/01/2003 2.5.59)" + +/* + * Use term=0,1,0,0,0 to turn terminators on/off + */ +static int term[MAX_ECARDS] = { 1, 1, 1, 1, 1, 1, 1, 1 }; + +#define NR_SG 256 + +struct eesoxscsi_info { + FAS216_Info info; + struct expansion_card *ec; + void __iomem *base; + void __iomem *ctl_port; + unsigned int control; + struct scatterlist sg[NR_SG]; /* Scatter DMA list */ +}; + +/* Prototype: void eesoxscsi_irqenable(ec, irqnr) + * Purpose : Enable interrupts on EESOX SCSI card + * Params : ec - expansion card structure + * : irqnr - interrupt number + */ +static void +eesoxscsi_irqenable(struct expansion_card *ec, int irqnr) +{ + struct eesoxscsi_info *info = (struct eesoxscsi_info *)ec->irq_data; + + info->control |= EESOX_INTR_ENABLE; + + writeb(info->control, info->ctl_port); +} + +/* Prototype: void eesoxscsi_irqdisable(ec, irqnr) + * Purpose : Disable interrupts on EESOX SCSI card + * Params : ec - expansion card structure + * : irqnr - interrupt number + */ +static void +eesoxscsi_irqdisable(struct expansion_card *ec, int irqnr) +{ + struct eesoxscsi_info *info = (struct eesoxscsi_info *)ec->irq_data; + + info->control &= ~EESOX_INTR_ENABLE; + + writeb(info->control, info->ctl_port); +} + +static const expansioncard_ops_t eesoxscsi_ops = { + .irqenable = eesoxscsi_irqenable, + .irqdisable = eesoxscsi_irqdisable, +}; + +/* Prototype: void eesoxscsi_terminator_ctl(*host, on_off) + * Purpose : Turn the EESOX SCSI terminators on or off + * Params : host - card to turn on/off + * : on_off - !0 to turn on, 0 to turn off + */ +static void +eesoxscsi_terminator_ctl(struct Scsi_Host *host, int on_off) +{ + struct eesoxscsi_info *info = (struct eesoxscsi_info *)host->hostdata; + unsigned long flags; + + spin_lock_irqsave(host->host_lock, flags); + if (on_off) + info->control |= EESOX_TERM_ENABLE; + else + info->control &= ~EESOX_TERM_ENABLE; + + writeb(info->control, info->ctl_port); + spin_unlock_irqrestore(host->host_lock, flags); +} + +/* Prototype: void eesoxscsi_intr(irq, *dev_id, *regs) + * Purpose : handle interrupts from EESOX SCSI card + * Params : irq - interrupt number + * dev_id - user-defined (Scsi_Host structure) + * regs - processor registers at interrupt + */ +static irqreturn_t +eesoxscsi_intr(int irq, void *dev_id, struct pt_regs *regs) +{ + struct eesoxscsi_info *info = dev_id; + + return fas216_intr(&info->info); +} + +/* Prototype: fasdmatype_t eesoxscsi_dma_setup(host, SCpnt, direction, min_type) + * Purpose : initialises DMA/PIO + * Params : host - host + * SCpnt - command + * direction - DMA on to/off of card + * min_type - minimum DMA support that we must have for this transfer + * Returns : type of transfer to be performed + */ +static fasdmatype_t +eesoxscsi_dma_setup(struct Scsi_Host *host, Scsi_Pointer *SCp, + fasdmadir_t direction, fasdmatype_t min_type) +{ + struct eesoxscsi_info *info = (struct eesoxscsi_info *)host->hostdata; + struct device *dev = scsi_get_device(host); + int dmach = info->info.scsi.dma; + + if (dmach != NO_DMA && + (min_type == fasdma_real_all || SCp->this_residual >= 512)) { + int bufs, map_dir, dma_dir; + + bufs = copy_SCp_to_sg(&info->sg[0], SCp, NR_SG); + + if (direction == DMA_OUT) + map_dir = DMA_TO_DEVICE, + dma_dir = DMA_MODE_WRITE; + else + map_dir = DMA_FROM_DEVICE, + dma_dir = DMA_MODE_READ; + + dma_map_sg(dev, info->sg, bufs + 1, map_dir); + + disable_dma(dmach); + set_dma_sg(dmach, info->sg, bufs + 1); + set_dma_mode(dmach, dma_dir); + enable_dma(dmach); + return fasdma_real_all; + } + /* + * We don't do DMA, we only do slow PIO + * + * Some day, we will do Pseudo DMA + */ + return fasdma_pseudo; +} + +static void eesoxscsi_buffer_in(void *buf, int length, void __iomem *base) +{ + const void __iomem *reg_fas = base + EESOX_FAS216_OFFSET; + const void __iomem *reg_dmastat = base + EESOX_DMASTAT; + const void __iomem *reg_dmadata = base + EESOX_DMADATA; + const register unsigned long mask = 0xffff; + + do { + unsigned int status; + + /* + * Interrupt request? + */ + status = readb(reg_fas + (REG_STAT << EESOX_FAS216_SHIFT)); + if (status & STAT_INT) + break; + + /* + * DMA request active? + */ + status = readb(reg_dmastat); + if (!(status & EESOX_STAT_DMA)) + continue; + + /* + * Get number of bytes in FIFO + */ + status = readb(reg_fas + (REG_CFIS << EESOX_FAS216_SHIFT)) & CFIS_CF; + if (status > 16) + status = 16; + if (status > length) + status = length; + + /* + * Align buffer. + */ + if (((u32)buf) & 2 && status >= 2) { + *(u16 *)buf = readl(reg_dmadata); + buf += 2; + status -= 2; + length -= 2; + } + + if (status >= 8) { + unsigned long l1, l2; + + l1 = readl(reg_dmadata) & mask; + l1 |= readl(reg_dmadata) << 16; + l2 = readl(reg_dmadata) & mask; + l2 |= readl(reg_dmadata) << 16; + *(u32 *)buf = l1; + buf += 4; + *(u32 *)buf = l2; + buf += 4; + length -= 8; + continue; + } + + if (status >= 4) { + unsigned long l1; + + l1 = readl(reg_dmadata) & mask; + l1 |= readl(reg_dmadata) << 16; + + *(u32 *)buf = l1; + buf += 4; + length -= 4; + continue; + } + + if (status >= 2) { + *(u16 *)buf = readl(reg_dmadata); + buf += 2; + length -= 2; + } + } while (length); +} + +static void eesoxscsi_buffer_out(void *buf, int length, void __iomem *base) +{ + const void __iomem *reg_fas = base + EESOX_FAS216_OFFSET; + const void __iomem *reg_dmastat = base + EESOX_DMASTAT; + const void __iomem *reg_dmadata = base + EESOX_DMADATA; + + do { + unsigned int status; + + /* + * Interrupt request? + */ + status = readb(reg_fas + (REG_STAT << EESOX_FAS216_SHIFT)); + if (status & STAT_INT) + break; + + /* + * DMA request active? + */ + status = readb(reg_dmastat); + if (!(status & EESOX_STAT_DMA)) + continue; + + /* + * Get number of bytes in FIFO + */ + status = readb(reg_fas + (REG_CFIS << EESOX_FAS216_SHIFT)) & CFIS_CF; + if (status > 16) + status = 16; + status = 16 - status; + if (status > length) + status = length; + status &= ~1; + + /* + * Align buffer. + */ + if (((u32)buf) & 2 && status >= 2) { + writel(*(u16 *)buf << 16, reg_dmadata); + buf += 2; + status -= 2; + length -= 2; + } + + if (status >= 8) { + unsigned long l1, l2; + + l1 = *(u32 *)buf; + buf += 4; + l2 = *(u32 *)buf; + buf += 4; + + writel(l1 << 16, reg_dmadata); + writel(l1, reg_dmadata); + writel(l2 << 16, reg_dmadata); + writel(l2, reg_dmadata); + length -= 8; + continue; + } + + if (status >= 4) { + unsigned long l1; + + l1 = *(u32 *)buf; + buf += 4; + + writel(l1 << 16, reg_dmadata); + writel(l1, reg_dmadata); + length -= 4; + continue; + } + + if (status >= 2) { + writel(*(u16 *)buf << 16, reg_dmadata); + buf += 2; + length -= 2; + } + } while (length); +} + +static void +eesoxscsi_dma_pseudo(struct Scsi_Host *host, Scsi_Pointer *SCp, + fasdmadir_t dir, int transfer_size) +{ + struct eesoxscsi_info *info = (struct eesoxscsi_info *)host->hostdata; + if (dir == DMA_IN) { + eesoxscsi_buffer_in(SCp->ptr, SCp->this_residual, info->base); + } else { + eesoxscsi_buffer_out(SCp->ptr, SCp->this_residual, info->base); + } +} + +/* Prototype: int eesoxscsi_dma_stop(host, SCpnt) + * Purpose : stops DMA/PIO + * Params : host - host + * SCpnt - command + */ +static void +eesoxscsi_dma_stop(struct Scsi_Host *host, Scsi_Pointer *SCp) +{ + struct eesoxscsi_info *info = (struct eesoxscsi_info *)host->hostdata; + if (info->info.scsi.dma != NO_DMA) + disable_dma(info->info.scsi.dma); +} + +/* Prototype: const char *eesoxscsi_info(struct Scsi_Host * host) + * Purpose : returns a descriptive string about this interface, + * Params : host - driver host structure to return info for. + * Returns : pointer to a static buffer containing null terminated string. + */ +const char *eesoxscsi_info(struct Scsi_Host *host) +{ + struct eesoxscsi_info *info = (struct eesoxscsi_info *)host->hostdata; + static char string[150]; + + sprintf(string, "%s (%s) in slot %d v%s terminators o%s", + host->hostt->name, info->info.scsi.type, info->ec->slot_no, + VERSION, info->control & EESOX_TERM_ENABLE ? "n" : "ff"); + + return string; +} + +/* Prototype: int eesoxscsi_set_proc_info(struct Scsi_Host *host, char *buffer, int length) + * Purpose : Set a driver specific function + * Params : host - host to setup + * : buffer - buffer containing string describing operation + * : length - length of string + * Returns : -EINVAL, or 0 + */ +static int +eesoxscsi_set_proc_info(struct Scsi_Host *host, char *buffer, int length) +{ + int ret = length; + + if (length >= 9 && strncmp(buffer, "EESOXSCSI", 9) == 0) { + buffer += 9; + length -= 9; + + if (length >= 5 && strncmp(buffer, "term=", 5) == 0) { + if (buffer[5] == '1') + eesoxscsi_terminator_ctl(host, 1); + else if (buffer[5] == '0') + eesoxscsi_terminator_ctl(host, 0); + else + ret = -EINVAL; + } else + ret = -EINVAL; + } else + ret = -EINVAL; + + return ret; +} + +/* Prototype: int eesoxscsi_proc_info(char *buffer, char **start, off_t offset, + * int length, int host_no, int inout) + * Purpose : Return information about the driver to a user process accessing + * the /proc filesystem. + * Params : buffer - a buffer to write information to + * start - a pointer into this buffer set by this routine to the start + * of the required information. + * offset - offset into information that we have read upto. + * length - length of buffer + * host_no - host number to return information for + * inout - 0 for reading, 1 for writing. + * Returns : length of data written to buffer. + */ +int eesoxscsi_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset, + int length, int inout) +{ + struct eesoxscsi_info *info; + char *p = buffer; + int pos; + + if (inout == 1) + return eesoxscsi_set_proc_info(host, buffer, length); + + info = (struct eesoxscsi_info *)host->hostdata; + + p += sprintf(p, "EESOX SCSI driver v%s\n", VERSION); + p += fas216_print_host(&info->info, p); + p += sprintf(p, "Term : o%s\n", + info->control & EESOX_TERM_ENABLE ? "n" : "ff"); + + p += fas216_print_stats(&info->info, p); + p += fas216_print_devices(&info->info, p); + + *start = buffer + offset; + pos = p - buffer - offset; + if (pos > length) + pos = length; + + return pos; +} + +static ssize_t eesoxscsi_show_term(struct device *dev, char *buf) +{ + struct expansion_card *ec = ECARD_DEV(dev); + struct Scsi_Host *host = ecard_get_drvdata(ec); + struct eesoxscsi_info *info = (struct eesoxscsi_info *)host->hostdata; + + return sprintf(buf, "%d\n", info->control & EESOX_TERM_ENABLE ? 1 : 0); +} + +static ssize_t eesoxscsi_store_term(struct device *dev, const char *buf, size_t len) +{ + struct expansion_card *ec = ECARD_DEV(dev); + struct Scsi_Host *host = ecard_get_drvdata(ec); + struct eesoxscsi_info *info = (struct eesoxscsi_info *)host->hostdata; + unsigned long flags; + + if (len > 1) { + spin_lock_irqsave(host->host_lock, flags); + if (buf[0] != '0') { + info->control |= EESOX_TERM_ENABLE; + } else { + info->control &= ~EESOX_TERM_ENABLE; + } + writeb(info->control, info->ctl_port); + spin_unlock_irqrestore(host->host_lock, flags); + } + + return len; +} + +static DEVICE_ATTR(bus_term, S_IRUGO | S_IWUSR, + eesoxscsi_show_term, eesoxscsi_store_term); + +static Scsi_Host_Template eesox_template = { + .module = THIS_MODULE, + .proc_info = eesoxscsi_proc_info, + .name = "EESOX SCSI", + .info = eesoxscsi_info, + .queuecommand = fas216_queue_command, + .eh_host_reset_handler = fas216_eh_host_reset, + .eh_bus_reset_handler = fas216_eh_bus_reset, + .eh_device_reset_handler = fas216_eh_device_reset, + .eh_abort_handler = fas216_eh_abort, + .can_queue = 1, + .this_id = 7, + .sg_tablesize = SG_ALL, + .cmd_per_lun = 1, + .use_clustering = DISABLE_CLUSTERING, + .proc_name = "eesox", +}; + +static int __devinit +eesoxscsi_probe(struct expansion_card *ec, const struct ecard_id *id) +{ + struct Scsi_Host *host; + struct eesoxscsi_info *info; + unsigned long resbase, reslen; + void __iomem *base; + int ret; + + ret = ecard_request_resources(ec); + if (ret) + goto out; + + resbase = ecard_resource_start(ec, ECARD_RES_IOCFAST); + reslen = ecard_resource_len(ec, ECARD_RES_IOCFAST); + base = ioremap(resbase, reslen); + if (!base) { + ret = -ENOMEM; + goto out_region; + } + + host = scsi_host_alloc(&eesox_template, + sizeof(struct eesoxscsi_info)); + if (!host) { + ret = -ENOMEM; + goto out_unmap; + } + + ecard_set_drvdata(ec, host); + + info = (struct eesoxscsi_info *)host->hostdata; + info->ec = ec; + info->base = base; + info->ctl_port = base + EESOX_CONTROL; + info->control = term[ec->slot_no] ? EESOX_TERM_ENABLE : 0; + writeb(info->control, info->ctl_port); + + info->info.scsi.io_base = base + EESOX_FAS216_OFFSET; + info->info.scsi.io_shift = EESOX_FAS216_SHIFT; + info->info.scsi.irq = ec->irq; + info->info.scsi.dma = ec->dma; + info->info.ifcfg.clockrate = 40; /* MHz */ + info->info.ifcfg.select_timeout = 255; + info->info.ifcfg.asyncperiod = 200; /* ns */ + info->info.ifcfg.sync_max_depth = 7; + info->info.ifcfg.cntl3 = CNTL3_FASTSCSI | CNTL3_FASTCLK; + info->info.ifcfg.disconnect_ok = 1; + info->info.ifcfg.wide_max_size = 0; + info->info.ifcfg.capabilities = FASCAP_PSEUDODMA; + info->info.dma.setup = eesoxscsi_dma_setup; + info->info.dma.pseudo = eesoxscsi_dma_pseudo; + info->info.dma.stop = eesoxscsi_dma_stop; + + ec->irqaddr = base + EESOX_DMASTAT; + ec->irqmask = EESOX_STAT_INTR; + ec->irq_data = info; + ec->ops = &eesoxscsi_ops; + + device_create_file(&ec->dev, &dev_attr_bus_term); + + ret = fas216_init(host); + if (ret) + goto out_free; + + ret = request_irq(ec->irq, eesoxscsi_intr, 0, "eesoxscsi", info); + if (ret) { + printk("scsi%d: IRQ%d not free: %d\n", + host->host_no, ec->irq, ret); + goto out_remove; + } + + if (info->info.scsi.dma != NO_DMA) { + if (request_dma(info->info.scsi.dma, "eesox")) { + printk("scsi%d: DMA%d not free, DMA disabled\n", + host->host_no, info->info.scsi.dma); + info->info.scsi.dma = NO_DMA; + } else { + set_dma_speed(info->info.scsi.dma, 180); + info->info.ifcfg.capabilities |= FASCAP_DMA; + info->info.ifcfg.cntl3 |= CNTL3_BS8; + } + } + + ret = fas216_add(host, &ec->dev); + if (ret == 0) + goto out; + + if (info->info.scsi.dma != NO_DMA) + free_dma(info->info.scsi.dma); + free_irq(ec->irq, host); + + out_remove: + fas216_remove(host); + + out_free: + device_remove_file(&ec->dev, &dev_attr_bus_term); + scsi_host_put(host); + + out_unmap: + iounmap(base); + + out_region: + ecard_release_resources(ec); + + out: + return ret; +} + +static void __devexit eesoxscsi_remove(struct expansion_card *ec) +{ + struct Scsi_Host *host = ecard_get_drvdata(ec); + struct eesoxscsi_info *info = (struct eesoxscsi_info *)host->hostdata; + + ecard_set_drvdata(ec, NULL); + fas216_remove(host); + + if (info->info.scsi.dma != NO_DMA) + free_dma(info->info.scsi.dma); + free_irq(ec->irq, info); + + device_remove_file(&ec->dev, &dev_attr_bus_term); + + iounmap(info->base); + + fas216_release(host); + scsi_host_put(host); + ecard_release_resources(ec); +} + +static const struct ecard_id eesoxscsi_cids[] = { + { MANU_EESOX, PROD_EESOX_SCSI2 }, + { 0xffff, 0xffff }, +}; + +static struct ecard_driver eesoxscsi_driver = { + .probe = eesoxscsi_probe, + .remove = __devexit_p(eesoxscsi_remove), + .id_table = eesoxscsi_cids, + .drv = { + .name = "eesoxscsi", + }, +}; + +static int __init eesox_init(void) +{ + return ecard_register_driver(&eesoxscsi_driver); +} + +static void __exit eesox_exit(void) +{ + ecard_remove_driver(&eesoxscsi_driver); +} + +module_init(eesox_init); +module_exit(eesox_exit); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("EESOX 'Fast' SCSI driver for Acorn machines"); +MODULE_PARM(term, "1-8i"); +MODULE_PARM_DESC(term, "SCSI bus termination"); +MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c new file mode 100644 index 00000000000..5411e850c83 --- /dev/null +++ b/drivers/scsi/arm/fas216.c @@ -0,0 +1,3043 @@ +/* + * linux/drivers/acorn/scsi/fas216.c + * + * Copyright (C) 1997-2003 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Based on information in qlogicfas.c by Tom Zerucha, Michael Griffith, and + * other sources, including: + * the AMD Am53CF94 data sheet + * the AMD Am53C94 data sheet + * + * This is a generic driver. To use it, have a look at cumana_2.c. You + * should define your own structure that overlays FAS216_Info, eg: + * struct my_host_data { + * FAS216_Info info; + * ... my host specific data ... + * }; + * + * Changelog: + * 30-08-1997 RMK Created + * 14-09-1997 RMK Started disconnect support + * 08-02-1998 RMK Corrected real DMA support + * 15-02-1998 RMK Started sync xfer support + * 06-04-1998 RMK Tightened conditions for printing incomplete + * transfers + * 02-05-1998 RMK Added extra checks in fas216_reset + * 24-05-1998 RMK Fixed synchronous transfers with period >= 200ns + * 27-06-1998 RMK Changed asm/delay.h to linux/delay.h + * 26-08-1998 RMK Improved message support wrt MESSAGE_REJECT + * 02-04-2000 RMK Converted to use the new error handling, and + * automatically request sense data upon check + * condition status from targets. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "../scsi.h" +#include +#include "fas216.h" +#include "scsi.h" + +/* NOTE: SCSI2 Synchronous transfers *require* DMA according to + * the data sheet. This restriction is crazy, especially when + * you only want to send 16 bytes! What were the guys who + * designed this chip on at that time? Did they read the SCSI2 + * spec at all? The following sections are taken from the SCSI2 + * standard (s2r10) concerning this: + * + * > IMPLEMENTORS NOTES: + * > (1) Re-negotiation at every selection is not recommended, since a + * > significant performance impact is likely. + * + * > The implied synchronous agreement shall remain in effect until a BUS DEVICE + * > RESET message is received, until a hard reset condition occurs, or until one + * > of the two SCSI devices elects to modify the agreement. The default data + * > transfer mode is asynchronous data transfer mode. The default data transfer + * > mode is entered at power on, after a BUS DEVICE RESET message, or after a hard + * > reset condition. + * + * In total, this means that once you have elected to use synchronous + * transfers, you must always use DMA. + * + * I was thinking that this was a good chip until I found this restriction ;( + */ +#define SCSI2_SYNC +#undef SCSI2_TAG + +#undef DEBUG_CONNECT +#undef DEBUG_MESSAGES + +#undef CHECK_STRUCTURE + +#define LOG_CONNECT (1 << 0) +#define LOG_BUSSERVICE (1 << 1) +#define LOG_FUNCTIONDONE (1 << 2) +#define LOG_MESSAGES (1 << 3) +#define LOG_BUFFER (1 << 4) +#define LOG_ERROR (1 << 8) + +static int level_mask = LOG_ERROR; + +module_param(level_mask, int, 0644); + +static int __init fas216_log_setup(char *str) +{ + char *s; + + level_mask = 0; + + while ((s = strsep(&str, ",")) != NULL) { + switch (s[0]) { + case 'a': + if (strcmp(s, "all") == 0) + level_mask |= -1; + break; + case 'b': + if (strncmp(s, "bus", 3) == 0) + level_mask |= LOG_BUSSERVICE; + if (strncmp(s, "buf", 3) == 0) + level_mask |= LOG_BUFFER; + break; + case 'c': + level_mask |= LOG_CONNECT; + break; + case 'e': + level_mask |= LOG_ERROR; + break; + case 'm': + level_mask |= LOG_MESSAGES; + break; + case 'n': + if (strcmp(s, "none") == 0) + level_mask = 0; + break; + case 's': + level_mask |= LOG_FUNCTIONDONE; + break; + } + } + return 1; +} + +__setup("fas216_logging=", fas216_log_setup); + +static inline unsigned char fas216_readb(FAS216_Info *info, unsigned int reg) +{ + unsigned int off = reg << info->scsi.io_shift; + return readb(info->scsi.io_base + off); +} + +static inline void fas216_writeb(FAS216_Info *info, unsigned int reg, unsigned int val) +{ + unsigned int off = reg << info->scsi.io_shift; + writeb(val, info->scsi.io_base + off); +} + +static void fas216_dumpstate(FAS216_Info *info) +{ + unsigned char is, stat, inst; + + is = fas216_readb(info, REG_IS); + stat = fas216_readb(info, REG_STAT); + inst = fas216_readb(info, REG_INST); + + printk("FAS216: CTCL=%02X CTCM=%02X CMD=%02X STAT=%02X" + " INST=%02X IS=%02X CFIS=%02X", + fas216_readb(info, REG_CTCL), + fas216_readb(info, REG_CTCM), + fas216_readb(info, REG_CMD), stat, inst, is, + fas216_readb(info, REG_CFIS)); + printk(" CNTL1=%02X CNTL2=%02X CNTL3=%02X CTCH=%02X\n", + fas216_readb(info, REG_CNTL1), + fas216_readb(info, REG_CNTL2), + fas216_readb(info, REG_CNTL3), + fas216_readb(info, REG_CTCH)); +} + +static void print_SCp(Scsi_Pointer *SCp, const char *prefix, const char *suffix) +{ + printk("%sptr %p this_residual 0x%x buffer %p buffers_residual 0x%x%s", + prefix, SCp->ptr, SCp->this_residual, SCp->buffer, + SCp->buffers_residual, suffix); +} + +static void fas216_dumpinfo(FAS216_Info *info) +{ + static int used = 0; + int i; + + if (used++) + return; + + printk("FAS216_Info=\n"); + printk(" { magic_start=%lX host=%p SCpnt=%p origSCpnt=%p\n", + info->magic_start, info->host, info->SCpnt, + info->origSCpnt); + printk(" scsi={ io_shift=%X irq=%X cfg={ %X %X %X %X }\n", + info->scsi.io_shift, info->scsi.irq, + info->scsi.cfg[0], info->scsi.cfg[1], info->scsi.cfg[2], + info->scsi.cfg[3]); + printk(" type=%p phase=%X\n", + info->scsi.type, info->scsi.phase); + print_SCp(&info->scsi.SCp, " SCp={ ", " }\n"); + printk(" msgs async_stp=%X disconnectable=%d aborting=%d }\n", + info->scsi.async_stp, + info->scsi.disconnectable, info->scsi.aborting); + printk(" stats={ queues=%X removes=%X fins=%X reads=%X writes=%X miscs=%X\n" + " disconnects=%X aborts=%X bus_resets=%X host_resets=%X}\n", + info->stats.queues, info->stats.removes, info->stats.fins, + info->stats.reads, info->stats.writes, info->stats.miscs, + info->stats.disconnects, info->stats.aborts, info->stats.bus_resets, + info->stats.host_resets); + printk(" ifcfg={ clockrate=%X select_timeout=%X asyncperiod=%X sync_max_depth=%X }\n", + info->ifcfg.clockrate, info->ifcfg.select_timeout, + info->ifcfg.asyncperiod, info->ifcfg.sync_max_depth); + for (i = 0; i < 8; i++) { + printk(" busyluns[%d]=%08lx dev[%d]={ disconnect_ok=%d stp=%X sof=%X sync_state=%X }\n", + i, info->busyluns[i], i, + info->device[i].disconnect_ok, info->device[i].stp, + info->device[i].sof, info->device[i].sync_state); + } + printk(" dma={ transfer_type=%X setup=%p pseudo=%p stop=%p }\n", + info->dma.transfer_type, info->dma.setup, + info->dma.pseudo, info->dma.stop); + printk(" internal_done=%X magic_end=%lX }\n", + info->internal_done, info->magic_end); +} + +#ifdef CHECK_STRUCTURE +static void __fas216_checkmagic(FAS216_Info *info, const char *func) +{ + int corruption = 0; + if (info->magic_start != MAGIC) { + printk(KERN_CRIT "FAS216 Error: magic at start corrupted\n"); + corruption++; + } + if (info->magic_end != MAGIC) { + printk(KERN_CRIT "FAS216 Error: magic at end corrupted\n"); + corruption++; + } + if (corruption) { + fas216_dumpinfo(info); + panic("scsi memory space corrupted in %s", func); + } +} +#define fas216_checkmagic(info) __fas216_checkmagic((info), __FUNCTION__) +#else +#define fas216_checkmagic(info) +#endif + +static const char *fas216_bus_phase(int stat) +{ + static const char *phases[] = { + "DATA OUT", "DATA IN", + "COMMAND", "STATUS", + "MISC OUT", "MISC IN", + "MESG OUT", "MESG IN" + }; + + return phases[stat & STAT_BUSMASK]; +} + +static const char *fas216_drv_phase(FAS216_Info *info) +{ + static const char *phases[] = { + [PHASE_IDLE] = "idle", + [PHASE_SELECTION] = "selection", + [PHASE_COMMAND] = "command", + [PHASE_DATAOUT] = "data out", + [PHASE_DATAIN] = "data in", + [PHASE_MSGIN] = "message in", + [PHASE_MSGIN_DISCONNECT]= "disconnect", + [PHASE_MSGOUT_EXPECT] = "expect message out", + [PHASE_MSGOUT] = "message out", + [PHASE_STATUS] = "status", + [PHASE_DONE] = "done", + }; + + if (info->scsi.phase < ARRAY_SIZE(phases) && + phases[info->scsi.phase]) + return phases[info->scsi.phase]; + return "???"; +} + +static char fas216_target(FAS216_Info *info) +{ + if (info->SCpnt) + return '0' + info->SCpnt->device->id; + else + return 'H'; +} + +static void +fas216_do_log(FAS216_Info *info, char target, char *fmt, va_list ap) +{ + static char buf[1024]; + + vsnprintf(buf, sizeof(buf), fmt, ap); + printk("scsi%d.%c: %s", info->host->host_no, target, buf); +} + +static void +fas216_log_command(FAS216_Info *info, int level, Scsi_Cmnd *SCpnt, char *fmt, ...) +{ + va_list args; + + if (level != 0 && !(level & level_mask)) + return; + + va_start(args, fmt); + fas216_do_log(info, '0' + SCpnt->device->id, fmt, args); + va_end(args); + + printk(" CDB: "); + print_command(SCpnt->cmnd); +} + +static void +fas216_log_target(FAS216_Info *info, int level, int target, char *fmt, ...) +{ + va_list args; + + if (level != 0 && !(level & level_mask)) + return; + + if (target < 0) + target = 'H'; + else + target += '0'; + + va_start(args, fmt); + fas216_do_log(info, target, fmt, args); + va_end(args); + + printk("\n"); +} + +static void fas216_log(FAS216_Info *info, int level, char *fmt, ...) +{ + va_list args; + + if (level != 0 && !(level & level_mask)) + return; + + va_start(args, fmt); + fas216_do_log(info, fas216_target(info), fmt, args); + va_end(args); + + printk("\n"); +} + +#define PH_SIZE 32 + +static struct { int stat, ssr, isr, ph; } ph_list[PH_SIZE]; +static int ph_ptr; + +static void add_debug_list(int stat, int ssr, int isr, int ph) +{ + ph_list[ph_ptr].stat = stat; + ph_list[ph_ptr].ssr = ssr; + ph_list[ph_ptr].isr = isr; + ph_list[ph_ptr].ph = ph; + + ph_ptr = (ph_ptr + 1) & (PH_SIZE-1); +} + +static struct { int command; void *from; } cmd_list[8]; +static int cmd_ptr; + +static void fas216_cmd(FAS216_Info *info, unsigned int command) +{ + cmd_list[cmd_ptr].command = command; + cmd_list[cmd_ptr].from = __builtin_return_address(0); + + cmd_ptr = (cmd_ptr + 1) & 7; + + fas216_writeb(info, REG_CMD, command); +} + +static void print_debug_list(void) +{ + int i; + + i = ph_ptr; + + printk(KERN_ERR "SCSI IRQ trail\n"); + do { + printk(" %02x:%02x:%02x:%1x", + ph_list[i].stat, ph_list[i].ssr, + ph_list[i].isr, ph_list[i].ph); + i = (i + 1) & (PH_SIZE - 1); + if (((i ^ ph_ptr) & 7) == 0) + printk("\n"); + } while (i != ph_ptr); + if ((i ^ ph_ptr) & 7) + printk("\n"); + + i = cmd_ptr; + printk(KERN_ERR "FAS216 commands: "); + do { + printk("%02x:%p ", cmd_list[i].command, cmd_list[i].from); + i = (i + 1) & 7; + } while (i != cmd_ptr); + printk("\n"); +} + +static void fas216_done(FAS216_Info *info, unsigned int result); + +/** + * fas216_get_last_msg - retrive last message from the list + * @info: interface to search + * @pos: current fifo position + * + * Retrieve a last message from the list, using position in fifo. + */ +static inline unsigned short +fas216_get_last_msg(FAS216_Info *info, int pos) +{ + unsigned short packed_msg = NOP; + struct message *msg; + int msgnr = 0; + + while ((msg = msgqueue_getmsg(&info->scsi.msgs, msgnr++)) != NULL) { + if (pos >= msg->fifo) + break; + } + + if (msg) { + if (msg->msg[0] == EXTENDED_MESSAGE) + packed_msg = EXTENDED_MESSAGE | msg->msg[2] << 8; + else + packed_msg = msg->msg[0]; + } + + fas216_log(info, LOG_MESSAGES, + "Message: %04x found at position %02x\n", packed_msg, pos); + + return packed_msg; +} + +/** + * fas216_syncperiod - calculate STP register value + * @info: state structure for interface connected to device + * @ns: period in ns (between subsequent bytes) + * + * Calculate value to be loaded into the STP register for a given period + * in ns. Returns a value suitable for REG_STP. + */ +static int fas216_syncperiod(FAS216_Info *info, int ns) +{ + int value = (info->ifcfg.clockrate * ns) / 1000; + + fas216_checkmagic(info); + + if (value < 4) + value = 4; + else if (value > 35) + value = 35; + + return value & 31; +} + +/** + * fas216_set_sync - setup FAS216 chip for specified transfer period. + * @info: state structure for interface connected to device + * @target: target + * + * Correctly setup FAS216 chip for specified transfer period. + * Notes : we need to switch the chip out of FASTSCSI mode if we have + * a transfer period >= 200ns - otherwise the chip will violate + * the SCSI timings. + */ +static void fas216_set_sync(FAS216_Info *info, int target) +{ + unsigned int cntl3; + + fas216_writeb(info, REG_SOF, info->device[target].sof); + fas216_writeb(info, REG_STP, info->device[target].stp); + + cntl3 = info->scsi.cfg[2]; + if (info->device[target].period >= (200 / 4)) + cntl3 = cntl3 & ~CNTL3_FASTSCSI; + + fas216_writeb(info, REG_CNTL3, cntl3); +} + +/* Synchronous transfer support + * + * Note: The SCSI II r10 spec says (5.6.12): + * + * (2) Due to historical problems with early host adapters that could + * not accept an SDTR message, some targets may not initiate synchronous + * negotiation after a power cycle as required by this standard. Host + * adapters that support synchronous mode may avoid the ensuing failure + * modes when the target is independently power cycled by initiating a + * synchronous negotiation on each REQUEST SENSE and INQUIRY command. + * This approach increases the SCSI bus overhead and is not recommended + * for new implementations. The correct method is to respond to an + * SDTR message with a MESSAGE REJECT message if the either the + * initiator or target devices does not support synchronous transfers + * or does not want to negotiate for synchronous transfers at the time. + * Using the correct method assures compatibility with wide data + * transfers and future enhancements. + * + * We will always initiate a synchronous transfer negotiation request on + * every INQUIRY or REQUEST SENSE message, unless the target itself has + * at some point performed a synchronous transfer negotiation request, or + * we have synchronous transfers disabled for this device. + */ + +/** + * fas216_handlesync - Handle a synchronous transfer message + * @info: state structure for interface + * @msg: message from target + * + * Handle a synchronous transfer message from the target + */ +static void fas216_handlesync(FAS216_Info *info, char *msg) +{ + struct fas216_device *dev = &info->device[info->SCpnt->device->id]; + enum { sync, async, none, reject } res = none; + +#ifdef SCSI2_SYNC + switch (msg[0]) { + case MESSAGE_REJECT: + /* Synchronous transfer request failed. + * Note: SCSI II r10: + * + * SCSI devices that are capable of synchronous + * data transfers shall not respond to an SDTR + * message with a MESSAGE REJECT message. + * + * Hence, if we get this condition, we disable + * negotiation for this device. + */ + if (dev->sync_state == neg_inprogress) { + dev->sync_state = neg_invalid; + res = async; + } + break; + + case EXTENDED_MESSAGE: + switch (dev->sync_state) { + /* We don't accept synchronous transfer requests. + * Respond with a MESSAGE_REJECT to prevent a + * synchronous transfer agreement from being reached. + */ + case neg_invalid: + res = reject; + break; + + /* We were not negotiating a synchronous transfer, + * but the device sent us a negotiation request. + * Honour the request by sending back a SDTR + * message containing our capability, limited by + * the targets capability. + */ + default: + fas216_cmd(info, CMD_SETATN); + if (msg[4] > info->ifcfg.sync_max_depth) + msg[4] = info->ifcfg.sync_max_depth; + if (msg[3] < 1000 / info->ifcfg.clockrate) + msg[3] = 1000 / info->ifcfg.clockrate; + + msgqueue_flush(&info->scsi.msgs); + msgqueue_addmsg(&info->scsi.msgs, 5, + EXTENDED_MESSAGE, 3, EXTENDED_SDTR, + msg[3], msg[4]); + info->scsi.phase = PHASE_MSGOUT_EXPECT; + + /* This is wrong. The agreement is not in effect + * until this message is accepted by the device + */ + dev->sync_state = neg_targcomplete; + res = sync; + break; + + /* We initiated the synchronous transfer negotiation, + * and have successfully received a response from the + * target. The synchronous transfer agreement has been + * reached. Note: if the values returned are out of our + * bounds, we must reject the message. + */ + case neg_inprogress: + res = reject; + if (msg[4] <= info->ifcfg.sync_max_depth && + msg[3] >= 1000 / info->ifcfg.clockrate) { + dev->sync_state = neg_complete; + res = sync; + } + break; + } + } +#else + res = reject; +#endif + + switch (res) { + case sync: + dev->period = msg[3]; + dev->sof = msg[4]; + dev->stp = fas216_syncperiod(info, msg[3] * 4); + fas216_set_sync(info, info->SCpnt->device->id); + break; + + case reject: + fas216_cmd(info, CMD_SETATN); + msgqueue_flush(&info->scsi.msgs); + msgqueue_addmsg(&info->scsi.msgs, 1, MESSAGE_REJECT); + info->scsi.phase = PHASE_MSGOUT_EXPECT; + + case async: + dev->period = info->ifcfg.asyncperiod / 4; + dev->sof = 0; + dev->stp = info->scsi.async_stp; + fas216_set_sync(info, info->SCpnt->device->id); + break; + + case none: + break; + } +} + +/** + * fas216_updateptrs - update data pointers after transfer suspended/paused + * @info: interface's local pointer to update + * @bytes_transferred: number of bytes transferred + * + * Update data pointers after transfer suspended/paused + */ +static void fas216_updateptrs(FAS216_Info *info, int bytes_transferred) +{ + Scsi_Pointer *SCp = &info->scsi.SCp; + + fas216_checkmagic(info); + + BUG_ON(bytes_transferred < 0); + + info->SCpnt->request_bufflen -= bytes_transferred; + + while (bytes_transferred != 0) { + if (SCp->this_residual > bytes_transferred) + break; + /* + * We have used up this buffer. Move on to the + * next buffer. + */ + bytes_transferred -= SCp->this_residual; + if (!next_SCp(SCp) && bytes_transferred) { + printk(KERN_WARNING "scsi%d.%c: out of buffers\n", + info->host->host_no, '0' + info->SCpnt->device->id); + return; + } + } + + SCp->this_residual -= bytes_transferred; + if (SCp->this_residual) + SCp->ptr += bytes_transferred; + else + SCp->ptr = NULL; +} + +/** + * fas216_pio - transfer data off of/on to card using programmed IO + * @info: interface to transfer data to/from + * @direction: direction to transfer data (DMA_OUT/DMA_IN) + * + * Transfer data off of/on to card using programmed IO. + * Notes: this is incredibly slow. + */ +static void fas216_pio(FAS216_Info *info, fasdmadir_t direction) +{ + Scsi_Pointer *SCp = &info->scsi.SCp; + + fas216_checkmagic(info); + + if (direction == DMA_OUT) + fas216_writeb(info, REG_FF, get_next_SCp_byte(SCp)); + else + put_next_SCp_byte(SCp, fas216_readb(info, REG_FF)); + + if (SCp->this_residual == 0) + next_SCp(SCp); +} + +static void fas216_set_stc(FAS216_Info *info, unsigned int length) +{ + fas216_writeb(info, REG_STCL, length); + fas216_writeb(info, REG_STCM, length >> 8); + fas216_writeb(info, REG_STCH, length >> 16); +} + +static unsigned int fas216_get_ctc(FAS216_Info *info) +{ + return fas216_readb(info, REG_CTCL) + + (fas216_readb(info, REG_CTCM) << 8) + + (fas216_readb(info, REG_CTCH) << 16); +} + +/** + * fas216_cleanuptransfer - clean up after a transfer has completed. + * @info: interface to clean up + * + * Update the data pointers according to the number of bytes transferred + * on the SCSI bus. + */ +static void fas216_cleanuptransfer(FAS216_Info *info) +{ + unsigned long total, residual, fifo; + fasdmatype_t dmatype = info->dma.transfer_type; + + info->dma.transfer_type = fasdma_none; + + /* + * PIO transfers do not need to be cleaned up. + */ + if (dmatype == fasdma_pio || dmatype == fasdma_none) + return; + + if (dmatype == fasdma_real_all) + total = info->SCpnt->request_bufflen; + else + total = info->scsi.SCp.this_residual; + + residual = fas216_get_ctc(info); + + fifo = fas216_readb(info, REG_CFIS) & CFIS_CF; + + fas216_log(info, LOG_BUFFER, "cleaning up from previous " + "transfer: length 0x%06x, residual 0x%x, fifo %d", + total, residual, fifo); + + /* + * If we were performing Data-Out, the transfer counter + * counts down each time a byte is transferred by the + * host to the FIFO. This means we must include the + * bytes left in the FIFO from the transfer counter. + */ + if (info->scsi.phase == PHASE_DATAOUT) + residual += fifo; + + fas216_updateptrs(info, total - residual); +} + +/** + * fas216_transfer - Perform a DMA/PIO transfer off of/on to card + * @info: interface from which device disconnected from + * + * Start a DMA/PIO transfer off of/on to card + */ +static void fas216_transfer(FAS216_Info *info) +{ + fasdmadir_t direction; + fasdmatype_t dmatype; + + fas216_log(info, LOG_BUFFER, + "starttransfer: buffer %p length 0x%06x reqlen 0x%06x", + info->scsi.SCp.ptr, info->scsi.SCp.this_residual, + info->SCpnt->request_bufflen); + + if (!info->scsi.SCp.ptr) { + fas216_log(info, LOG_ERROR, "null buffer passed to " + "fas216_starttransfer"); + print_SCp(&info->scsi.SCp, "SCp: ", "\n"); + print_SCp(&info->SCpnt->SCp, "Cmnd SCp: ", "\n"); + return; + } + + /* + * If we have a synchronous transfer agreement in effect, we must + * use DMA mode. If we are using asynchronous transfers, we may + * use DMA mode or PIO mode. + */ + if (info->device[info->SCpnt->device->id].sof) + dmatype = fasdma_real_all; + else + dmatype = fasdma_pio; + + if (info->scsi.phase == PHASE_DATAOUT) + direction = DMA_OUT; + else + direction = DMA_IN; + + if (info->dma.setup) + dmatype = info->dma.setup(info->host, &info->scsi.SCp, + direction, dmatype); + info->dma.transfer_type = dmatype; + + if (dmatype == fasdma_real_all) + fas216_set_stc(info, info->SCpnt->request_bufflen); + else + fas216_set_stc(info, info->scsi.SCp.this_residual); + + switch (dmatype) { + case fasdma_pio: + fas216_log(info, LOG_BUFFER, "PIO transfer"); + fas216_writeb(info, REG_SOF, 0); + fas216_writeb(info, REG_STP, info->scsi.async_stp); + fas216_cmd(info, CMD_TRANSFERINFO); + fas216_pio(info, direction); + break; + + case fasdma_pseudo: + fas216_log(info, LOG_BUFFER, "pseudo transfer"); + fas216_cmd(info, CMD_TRANSFERINFO | CMD_WITHDMA); + info->dma.pseudo(info->host, &info->scsi.SCp, + direction, info->SCpnt->transfersize); + break; + + case fasdma_real_block: + fas216_log(info, LOG_BUFFER, "block dma transfer"); + fas216_cmd(info, CMD_TRANSFERINFO | CMD_WITHDMA); + break; + + case fasdma_real_all: + fas216_log(info, LOG_BUFFER, "total dma transfer"); + fas216_cmd(info, CMD_TRANSFERINFO | CMD_WITHDMA); + break; + + default: + fas216_log(info, LOG_BUFFER | LOG_ERROR, + "invalid FAS216 DMA type"); + break; + } +} + +/** + * fas216_stoptransfer - Stop a DMA transfer onto / off of the card + * @info: interface from which device disconnected from + * + * Called when we switch away from DATA IN or DATA OUT phases. + */ +static void fas216_stoptransfer(FAS216_Info *info) +{ + fas216_checkmagic(info); + + if (info->dma.transfer_type == fasdma_real_all || + info->dma.transfer_type == fasdma_real_block) + info->dma.stop(info->host, &info->scsi.SCp); + + fas216_cleanuptransfer(info); + + if (info->scsi.phase == PHASE_DATAIN) { + unsigned int fifo; + + /* + * If we were performing Data-In, then the FIFO counter + * contains the number of bytes not transferred via DMA + * from the on-board FIFO. Read them manually. + */ + fifo = fas216_readb(info, REG_CFIS) & CFIS_CF; + while (fifo && info->scsi.SCp.ptr) { + *info->scsi.SCp.ptr = fas216_readb(info, REG_FF); + fas216_updateptrs(info, 1); + fifo--; + } + } else { + /* + * After a Data-Out phase, there may be unsent + * bytes left in the FIFO. Flush them out. + */ + fas216_cmd(info, CMD_FLUSHFIFO); + } +} + +static void fas216_aborttransfer(FAS216_Info *info) +{ + fas216_checkmagic(info); + + if (info->dma.transfer_type == fasdma_real_all || + info->dma.transfer_type == fasdma_real_block) + info->dma.stop(info->host, &info->scsi.SCp); + + info->dma.transfer_type = fasdma_none; + fas216_cmd(info, CMD_FLUSHFIFO); +} + +static void fas216_kick(FAS216_Info *info); + +/** + * fas216_disconnected_intr - handle device disconnection + * @info: interface from which device disconnected from + * + * Handle device disconnection + */ +static void fas216_disconnect_intr(FAS216_Info *info) +{ + unsigned long flags; + + fas216_checkmagic(info); + + fas216_log(info, LOG_CONNECT, "disconnect phase=%02x", + info->scsi.phase); + + msgqueue_flush(&info->scsi.msgs); + + switch (info->scsi.phase) { + case PHASE_SELECTION: /* while selecting - no target */ + case PHASE_SELSTEPS: + fas216_done(info, DID_NO_CONNECT); + break; + + case PHASE_MSGIN_DISCONNECT: /* message in - disconnecting */ + info->scsi.disconnectable = 1; + info->scsi.phase = PHASE_IDLE; + info->stats.disconnects += 1; + spin_lock_irqsave(&info->host_lock, flags); + if (info->scsi.phase == PHASE_IDLE) + fas216_kick(info); + spin_unlock_irqrestore(&info->host_lock, flags); + break; + + case PHASE_DONE: /* at end of command - complete */ + fas216_done(info, DID_OK); + break; + + case PHASE_MSGOUT: /* message out - possible ABORT message */ + if (fas216_get_last_msg(info, info->scsi.msgin_fifo) == ABORT) { + info->scsi.aborting = 0; + fas216_done(info, DID_ABORT); + break; + } + + default: /* huh? */ + printk(KERN_ERR "scsi%d.%c: unexpected disconnect in phase %s\n", + info->host->host_no, fas216_target(info), fas216_drv_phase(info)); + print_debug_list(); + fas216_stoptransfer(info); + fas216_done(info, DID_ERROR); + break; + } +} + +/** + * fas216_reselected_intr - start reconnection of a device + * @info: interface which was reselected + * + * Start reconnection of a device + */ +static void +fas216_reselected_intr(FAS216_Info *info) +{ + unsigned int cfis, i; + unsigned char msg[4]; + unsigned char target, lun, tag; + + fas216_checkmagic(info); + + WARN_ON(info->scsi.phase == PHASE_SELECTION || + info->scsi.phase == PHASE_SELSTEPS); + + cfis = fas216_readb(info, REG_CFIS); + + fas216_log(info, LOG_CONNECT, "reconnect phase=%02x cfis=%02x", + info->scsi.phase, cfis); + + cfis &= CFIS_CF; + + if (cfis < 2 || cfis > 4) { + printk(KERN_ERR "scsi%d.H: incorrect number of bytes after reselect\n", + info->host->host_no); + goto bad_message; + } + + for (i = 0; i < cfis; i++) + msg[i] = fas216_readb(info, REG_FF); + + if (!(msg[0] & (1 << info->host->this_id)) || + !(msg[1] & 0x80)) + goto initiator_error; + + target = msg[0] & ~(1 << info->host->this_id); + target = ffs(target) - 1; + lun = msg[1] & 7; + tag = 0; + + if (cfis >= 3) { + if (msg[2] != SIMPLE_QUEUE_TAG) + goto initiator_error; + + tag = msg[3]; + } + + /* set up for synchronous transfers */ + fas216_writeb(info, REG_SDID, target); + fas216_set_sync(info, target); + msgqueue_flush(&info->scsi.msgs); + + fas216_log(info, LOG_CONNECT, "Reconnected: target %1x lun %1x tag %02x", + target, lun, tag); + + if (info->scsi.disconnectable && info->SCpnt) { + info->scsi.disconnectable = 0; + if (info->SCpnt->device->id == target && + info->SCpnt->device->lun == lun && + info->SCpnt->tag == tag) { + fas216_log(info, LOG_CONNECT, "reconnected previously executing command"); + } else { + queue_add_cmd_tail(&info->queues.disconnected, info->SCpnt); + fas216_log(info, LOG_CONNECT, "had to move command to disconnected queue"); + info->SCpnt = NULL; + } + } + if (!info->SCpnt) { + info->SCpnt = queue_remove_tgtluntag(&info->queues.disconnected, + target, lun, tag); + fas216_log(info, LOG_CONNECT, "had to get command"); + } + + if (info->SCpnt) { + /* + * Restore data pointer from SAVED data pointer + */ + info->scsi.SCp = info->SCpnt->SCp; + + fas216_log(info, LOG_CONNECT, "data pointers: [%p, %X]", + info->scsi.SCp.ptr, info->scsi.SCp.this_residual); + info->scsi.phase = PHASE_MSGIN; + } else { + /* + * Our command structure not found - abort the + * command on the target. Since we have no + * record of this command, we can't send + * an INITIATOR DETECTED ERROR message. + */ + fas216_cmd(info, CMD_SETATN); + +#if 0 + if (tag) + msgqueue_addmsg(&info->scsi.msgs, 2, ABORT_TAG, tag); + else +#endif + msgqueue_addmsg(&info->scsi.msgs, 1, ABORT); + info->scsi.phase = PHASE_MSGOUT_EXPECT; + info->scsi.aborting = 1; + } + + fas216_cmd(info, CMD_MSGACCEPTED); + return; + + initiator_error: + printk(KERN_ERR "scsi%d.H: error during reselection: bytes", + info->host->host_no); + for (i = 0; i < cfis; i++) + printk(" %02x", msg[i]); + printk("\n"); + bad_message: + fas216_cmd(info, CMD_SETATN); + msgqueue_flush(&info->scsi.msgs); + msgqueue_addmsg(&info->scsi.msgs, 1, INITIATOR_ERROR); + info->scsi.phase = PHASE_MSGOUT_EXPECT; + fas216_cmd(info, CMD_MSGACCEPTED); +} + +static void fas216_parse_message(FAS216_Info *info, unsigned char *message, int msglen) +{ + int i; + + switch (message[0]) { + case COMMAND_COMPLETE: + if (msglen != 1) + goto unrecognised; + + printk(KERN_ERR "scsi%d.%c: command complete with no " + "status in MESSAGE_IN?\n", + info->host->host_no, fas216_target(info)); + break; + + case SAVE_POINTERS: + if (msglen != 1) + goto unrecognised; + + /* + * Save current data pointer to SAVED data pointer + * SCSI II standard says that we must not acknowledge + * this until we have really saved pointers. + * NOTE: we DO NOT save the command nor status pointers + * as required by the SCSI II standard. These always + * point to the start of their respective areas. + */ + info->SCpnt->SCp = info->scsi.SCp; + info->SCpnt->SCp.sent_command = 0; + fas216_log(info, LOG_CONNECT | LOG_MESSAGES | LOG_BUFFER, + "save data pointers: [%p, %X]", + info->scsi.SCp.ptr, info->scsi.SCp.this_residual); + break; + + case RESTORE_POINTERS: + if (msglen != 1) + goto unrecognised; + + /* + * Restore current data pointer from SAVED data pointer + */ + info->scsi.SCp = info->SCpnt->SCp; + fas216_log(info, LOG_CONNECT | LOG_MESSAGES | LOG_BUFFER, + "restore data pointers: [%p, 0x%x]", + info->scsi.SCp.ptr, info->scsi.SCp.this_residual); + break; + + case DISCONNECT: + if (msglen != 1) + goto unrecognised; + + info->scsi.phase = PHASE_MSGIN_DISCONNECT; + break; + + case MESSAGE_REJECT: + if (msglen != 1) + goto unrecognised; + + switch (fas216_get_last_msg(info, info->scsi.msgin_fifo)) { + case EXTENDED_MESSAGE | EXTENDED_SDTR << 8: + fas216_handlesync(info, message); + break; + + default: + fas216_log(info, 0, "reject, last message 0x%04x", + fas216_get_last_msg(info, info->scsi.msgin_fifo)); + } + break; + + case NOP: + break; + + case EXTENDED_MESSAGE: + if (msglen < 3) + goto unrecognised; + + switch (message[2]) { + case EXTENDED_SDTR: /* Sync transfer negotiation request/reply */ + fas216_handlesync(info, message); + break; + + default: + goto unrecognised; + } + break; + + default: + goto unrecognised; + } + return; + +unrecognised: + fas216_log(info, 0, "unrecognised message, rejecting"); + printk("scsi%d.%c: message was", info->host->host_no, fas216_target(info)); + for (i = 0; i < msglen; i++) + printk("%s%02X", i & 31 ? " " : "\n ", message[i]); + printk("\n"); + + /* + * Something strange seems to be happening here - + * I can't use SETATN since the chip gives me an + * invalid command interrupt when I do. Weird. + */ +fas216_cmd(info, CMD_NOP); +fas216_dumpstate(info); + fas216_cmd(info, CMD_SETATN); + msgqueue_flush(&info->scsi.msgs); + msgqueue_addmsg(&info->scsi.msgs, 1, MESSAGE_REJECT); + info->scsi.phase = PHASE_MSGOUT_EXPECT; +fas216_dumpstate(info); +} + +static int fas216_wait_cmd(FAS216_Info *info, int cmd) +{ + int tout; + int stat; + + fas216_cmd(info, cmd); + + for (tout = 1000; tout; tout -= 1) { + stat = fas216_readb(info, REG_STAT); + if (stat & (STAT_INT|STAT_PARITYERROR)) + break; + udelay(1); + } + + return stat; +} + +static int fas216_get_msg_byte(FAS216_Info *info) +{ + unsigned int stat = fas216_wait_cmd(info, CMD_MSGACCEPTED); + + if ((stat & STAT_INT) == 0) + goto timedout; + + if ((stat & STAT_BUSMASK) != STAT_MESGIN) + goto unexpected_phase_change; + + fas216_readb(info, REG_INST); + + stat = fas216_wait_cmd(info, CMD_TRANSFERINFO); + + if ((stat & STAT_INT) == 0) + goto timedout; + + if (stat & STAT_PARITYERROR) + goto parity_error; + + if ((stat & STAT_BUSMASK) != STAT_MESGIN) + goto unexpected_phase_change; + + fas216_readb(info, REG_INST); + + return fas216_readb(info, REG_FF); + +timedout: + fas216_log(info, LOG_ERROR, "timed out waiting for message byte"); + return -1; + +unexpected_phase_change: + fas216_log(info, LOG_ERROR, "unexpected phase change: status = %02x", stat); + return -2; + +parity_error: + fas216_log(info, LOG_ERROR, "parity error during message in phase"); + return -3; +} + +/** + * fas216_message - handle a function done interrupt from FAS216 chip + * @info: interface which caused function done interrupt + * + * Handle a function done interrupt from FAS216 chip + */ +static void fas216_message(FAS216_Info *info) +{ + unsigned char *message = info->scsi.message; + unsigned int msglen = 1; + int msgbyte = 0; + + fas216_checkmagic(info); + + message[0] = fas216_readb(info, REG_FF); + + if (message[0] == EXTENDED_MESSAGE) { + msgbyte = fas216_get_msg_byte(info); + + if (msgbyte >= 0) { + message[1] = msgbyte; + + for (msglen = 2; msglen < message[1] + 2; msglen++) { + msgbyte = fas216_get_msg_byte(info); + + if (msgbyte >= 0) + message[msglen] = msgbyte; + else + break; + } + } + } + + if (msgbyte == -3) + goto parity_error; + +#ifdef DEBUG_MESSAGES + { + int i; + + printk("scsi%d.%c: message in: ", + info->host->host_no, fas216_target(info)); + for (i = 0; i < msglen; i++) + printk("%02X ", message[i]); + printk("\n"); + } +#endif + + fas216_parse_message(info, message, msglen); + fas216_cmd(info, CMD_MSGACCEPTED); + return; + +parity_error: + fas216_cmd(info, CMD_SETATN); + msgqueue_flush(&info->scsi.msgs); + msgqueue_addmsg(&info->scsi.msgs, 1, MSG_PARITY_ERROR); + info->scsi.phase = PHASE_MSGOUT_EXPECT; + fas216_cmd(info, CMD_MSGACCEPTED); + return; +} + +/** + * fas216_send_command - send command after all message bytes have been sent + * @info: interface which caused bus service + * + * Send a command to a target after all message bytes have been sent + */ +static void fas216_send_command(FAS216_Info *info) +{ + int i; + + fas216_checkmagic(info); + + fas216_cmd(info, CMD_NOP|CMD_WITHDMA); + fas216_cmd(info, CMD_FLUSHFIFO); + + /* load command */ + for (i = info->scsi.SCp.sent_command; i < info->SCpnt->cmd_len; i++) + fas216_writeb(info, REG_FF, info->SCpnt->cmnd[i]); + + fas216_cmd(info, CMD_TRANSFERINFO); + + info->scsi.phase = PHASE_COMMAND; +} + +/** + * fas216_send_messageout - handle bus service to send a message + * @info: interface which caused bus service + * + * Handle bus service to send a message. + * Note: We do not allow the device to change the data direction! + */ +static void fas216_send_messageout(FAS216_Info *info, int start) +{ + unsigned int tot_msglen = msgqueue_msglength(&info->scsi.msgs); + + fas216_checkmagic(info); + + fas216_cmd(info, CMD_FLUSHFIFO); + + if (tot_msglen) { + struct message *msg; + int msgnr = 0; + + while ((msg = msgqueue_getmsg(&info->scsi.msgs, msgnr++)) != NULL) { + int i; + + for (i = start; i < msg->length; i++) + fas216_writeb(info, REG_FF, msg->msg[i]); + + msg->fifo = tot_msglen - (fas216_readb(info, REG_CFIS) & CFIS_CF); + start = 0; + } + } else + fas216_writeb(info, REG_FF, NOP); + + fas216_cmd(info, CMD_TRANSFERINFO); + + info->scsi.phase = PHASE_MSGOUT; +} + +/** + * fas216_busservice_intr - handle bus service interrupt from FAS216 chip + * @info: interface which caused bus service interrupt + * @stat: Status register contents + * @is: SCSI Status register contents + * + * Handle a bus service interrupt from FAS216 chip + */ +static void fas216_busservice_intr(FAS216_Info *info, unsigned int stat, unsigned int is) +{ + fas216_checkmagic(info); + + fas216_log(info, LOG_BUSSERVICE, + "bus service: stat=%02x is=%02x phase=%02x", + stat, is, info->scsi.phase); + + switch (info->scsi.phase) { + case PHASE_SELECTION: + if ((is & IS_BITS) != IS_MSGBYTESENT) + goto bad_is; + break; + + case PHASE_SELSTEPS: + switch (is & IS_BITS) { + case IS_SELARB: + case IS_MSGBYTESENT: + goto bad_is; + + case IS_NOTCOMMAND: + case IS_EARLYPHASE: + if ((stat & STAT_BUSMASK) == STAT_MESGIN) + break; + goto bad_is; + + case IS_COMPLETE: + break; + } + + default: + break; + } + + fas216_cmd(info, CMD_NOP); + +#define STATE(st,ph) ((ph) << 3 | (st)) + /* This table describes the legal SCSI state transitions, + * as described by the SCSI II spec. + */ + switch (STATE(stat & STAT_BUSMASK, info->scsi.phase)) { + case STATE(STAT_DATAIN, PHASE_SELSTEPS):/* Sel w/ steps -> Data In */ + case STATE(STAT_DATAIN, PHASE_MSGOUT): /* Message Out -> Data In */ + case STATE(STAT_DATAIN, PHASE_COMMAND): /* Command -> Data In */ + case STATE(STAT_DATAIN, PHASE_MSGIN): /* Message In -> Data In */ + info->scsi.phase = PHASE_DATAIN; + fas216_transfer(info); + return; + + case STATE(STAT_DATAIN, PHASE_DATAIN): /* Data In -> Data In */ + case STATE(STAT_DATAOUT, PHASE_DATAOUT):/* Data Out -> Data Out */ + fas216_cleanuptransfer(info); + fas216_transfer(info); + return; + + case STATE(STAT_DATAOUT, PHASE_SELSTEPS):/* Sel w/ steps-> Data Out */ + case STATE(STAT_DATAOUT, PHASE_MSGOUT): /* Message Out -> Data Out */ + case STATE(STAT_DATAOUT, PHASE_COMMAND):/* Command -> Data Out */ + case STATE(STAT_DATAOUT, PHASE_MSGIN): /* Message In -> Data Out */ + fas216_cmd(info, CMD_FLUSHFIFO); + info->scsi.phase = PHASE_DATAOUT; + fas216_transfer(info); + return; + + case STATE(STAT_STATUS, PHASE_DATAOUT): /* Data Out -> Status */ + case STATE(STAT_STATUS, PHASE_DATAIN): /* Data In -> Status */ + fas216_stoptransfer(info); + case STATE(STAT_STATUS, PHASE_SELSTEPS):/* Sel w/ steps -> Status */ + case STATE(STAT_STATUS, PHASE_MSGOUT): /* Message Out -> Status */ + case STATE(STAT_STATUS, PHASE_COMMAND): /* Command -> Status */ + case STATE(STAT_STATUS, PHASE_MSGIN): /* Message In -> Status */ + fas216_cmd(info, CMD_INITCMDCOMPLETE); + info->scsi.phase = PHASE_STATUS; + return; + + case STATE(STAT_MESGIN, PHASE_DATAOUT): /* Data Out -> Message In */ + case STATE(STAT_MESGIN, PHASE_DATAIN): /* Data In -> Message In */ + fas216_stoptransfer(info); + case STATE(STAT_MESGIN, PHASE_COMMAND): /* Command -> Message In */ + case STATE(STAT_MESGIN, PHASE_SELSTEPS):/* Sel w/ steps -> Message In */ + case STATE(STAT_MESGIN, PHASE_MSGOUT): /* Message Out -> Message In */ + info->scsi.msgin_fifo = fas216_readb(info, REG_CFIS) & CFIS_CF; + fas216_cmd(info, CMD_FLUSHFIFO); + fas216_cmd(info, CMD_TRANSFERINFO); + info->scsi.phase = PHASE_MSGIN; + return; + + case STATE(STAT_MESGIN, PHASE_MSGIN): + info->scsi.msgin_fifo = fas216_readb(info, REG_CFIS) & CFIS_CF; + fas216_cmd(info, CMD_TRANSFERINFO); + return; + + case STATE(STAT_COMMAND, PHASE_MSGOUT): /* Message Out -> Command */ + case STATE(STAT_COMMAND, PHASE_MSGIN): /* Message In -> Command */ + fas216_send_command(info); + info->scsi.phase = PHASE_COMMAND; + return; + + + /* + * Selection -> Message Out + */ + case STATE(STAT_MESGOUT, PHASE_SELECTION): + fas216_send_messageout(info, 1); + return; + + /* + * Message Out -> Message Out + */ + case STATE(STAT_MESGOUT, PHASE_SELSTEPS): + case STATE(STAT_MESGOUT, PHASE_MSGOUT): + /* + * If we get another message out phase, this usually + * means some parity error occurred. Resend complete + * set of messages. If we have more than one byte to + * send, we need to assert ATN again. + */ + if (info->device[info->SCpnt->device->id].parity_check) { + /* + * We were testing... good, the device + * supports parity checking. + */ + info->device[info->SCpnt->device->id].parity_check = 0; + info->device[info->SCpnt->device->id].parity_enabled = 1; + fas216_writeb(info, REG_CNTL1, info->scsi.cfg[0]); + } + + if (msgqueue_msglength(&info->scsi.msgs) > 1) + fas216_cmd(info, CMD_SETATN); + /*FALLTHROUGH*/ + + /* + * Any -> Message Out + */ + case STATE(STAT_MESGOUT, PHASE_MSGOUT_EXPECT): + fas216_send_messageout(info, 0); + return; + + /* Error recovery rules. + * These either attempt to abort or retry the operation. + * TODO: we need more of these + */ + case STATE(STAT_COMMAND, PHASE_COMMAND):/* Command -> Command */ + /* error - we've sent out all the command bytes + * we have. + * NOTE: we need SAVE DATA POINTERS/RESTORE DATA POINTERS + * to include the command bytes sent for this to work + * correctly. + */ + printk(KERN_ERR "scsi%d.%c: " + "target trying to receive more command bytes\n", + info->host->host_no, fas216_target(info)); + fas216_cmd(info, CMD_SETATN); + fas216_set_stc(info, 15); + fas216_cmd(info, CMD_PADBYTES | CMD_WITHDMA); + msgqueue_flush(&info->scsi.msgs); + msgqueue_addmsg(&info->scsi.msgs, 1, INITIATOR_ERROR); + info->scsi.phase = PHASE_MSGOUT_EXPECT; + return; + } + + if (info->scsi.phase == PHASE_MSGIN_DISCONNECT) { + printk(KERN_ERR "scsi%d.%c: disconnect message received, but bus service %s?\n", + info->host->host_no, fas216_target(info), + fas216_bus_phase(stat)); + msgqueue_flush(&info->scsi.msgs); + fas216_cmd(info, CMD_SETATN); + msgqueue_addmsg(&info->scsi.msgs, 1, INITIATOR_ERROR); + info->scsi.phase = PHASE_MSGOUT_EXPECT; + info->scsi.aborting = 1; + fas216_cmd(info, CMD_TRANSFERINFO); + return; + } + printk(KERN_ERR "scsi%d.%c: bus phase %s after %s?\n", + info->host->host_no, fas216_target(info), + fas216_bus_phase(stat), + fas216_drv_phase(info)); + print_debug_list(); + return; + +bad_is: + fas216_log(info, 0, "bus service at step %d?", is & IS_BITS); + fas216_dumpstate(info); + print_debug_list(); + + fas216_done(info, DID_ERROR); +} + +/** + * fas216_funcdone_intr - handle a function done interrupt from FAS216 chip + * @info: interface which caused function done interrupt + * @stat: Status register contents + * @is: SCSI Status register contents + * + * Handle a function done interrupt from FAS216 chip + */ +static void fas216_funcdone_intr(FAS216_Info *info, unsigned int stat, unsigned int is) +{ + unsigned int fifo_len = fas216_readb(info, REG_CFIS) & CFIS_CF; + + fas216_checkmagic(info); + + fas216_log(info, LOG_FUNCTIONDONE, + "function done: stat=%02x is=%02x phase=%02x", + stat, is, info->scsi.phase); + + switch (info->scsi.phase) { + case PHASE_STATUS: /* status phase - read status and msg */ + if (fifo_len != 2) { + fas216_log(info, 0, "odd number of bytes in FIFO: %d", fifo_len); + } + /* + * Read status then message byte. + */ + info->scsi.SCp.Status = fas216_readb(info, REG_FF); + info->scsi.SCp.Message = fas216_readb(info, REG_FF); + info->scsi.phase = PHASE_DONE; + fas216_cmd(info, CMD_MSGACCEPTED); + break; + + case PHASE_IDLE: + case PHASE_SELECTION: + case PHASE_SELSTEPS: + break; + + case PHASE_MSGIN: /* message in phase */ + if ((stat & STAT_BUSMASK) == STAT_MESGIN) { + info->scsi.msgin_fifo = fifo_len; + fas216_message(info); + break; + } + + default: + fas216_log(info, 0, "internal phase %s for function done?" + " What do I do with this?", + fas216_target(info), fas216_drv_phase(info)); + } +} + +static void fas216_bus_reset(FAS216_Info *info) +{ + neg_t sync_state; + int i; + + msgqueue_flush(&info->scsi.msgs); + + sync_state = neg_invalid; + +#ifdef SCSI2_SYNC + if (info->ifcfg.capabilities & (FASCAP_DMA|FASCAP_PSEUDODMA)) + sync_state = neg_wait; +#endif + + info->scsi.phase = PHASE_IDLE; + info->SCpnt = NULL; /* bug! */ + memset(&info->scsi.SCp, 0, sizeof(info->scsi.SCp)); + + for (i = 0; i < 8; i++) { + info->device[i].disconnect_ok = info->ifcfg.disconnect_ok; + info->device[i].sync_state = sync_state; + info->device[i].period = info->ifcfg.asyncperiod / 4; + info->device[i].stp = info->scsi.async_stp; + info->device[i].sof = 0; + info->device[i].wide_xfer = 0; + } + + info->rst_bus_status = 1; + wake_up(&info->eh_wait); +} + +/** + * fas216_intr - handle interrupts to progress a command + * @info: interface to service + * + * Handle interrupts from the interface to progress a command + */ +irqreturn_t fas216_intr(FAS216_Info *info) +{ + unsigned char inst, is, stat; + int handled = IRQ_NONE; + + fas216_checkmagic(info); + + stat = fas216_readb(info, REG_STAT); + is = fas216_readb(info, REG_IS); + inst = fas216_readb(info, REG_INST); + + add_debug_list(stat, is, inst, info->scsi.phase); + + if (stat & STAT_INT) { + if (inst & INST_BUSRESET) { + fas216_log(info, 0, "bus reset detected"); + fas216_bus_reset(info); + scsi_report_bus_reset(info->host, 0); + } else if (inst & INST_ILLEGALCMD) { + fas216_log(info, LOG_ERROR, "illegal command given\n"); + fas216_dumpstate(info); + print_debug_list(); + } else if (inst & INST_DISCONNECT) + fas216_disconnect_intr(info); + else if (inst & INST_RESELECTED) /* reselected */ + fas216_reselected_intr(info); + else if (inst & INST_BUSSERVICE) /* bus service request */ + fas216_busservice_intr(info, stat, is); + else if (inst & INST_FUNCDONE) /* function done */ + fas216_funcdone_intr(info, stat, is); + else + fas216_log(info, 0, "unknown interrupt received:" + " phase %s inst %02X is %02X stat %02X", + fas216_drv_phase(info), inst, is, stat); + handled = IRQ_HANDLED; + } + return handled; +} + +static void __fas216_start_command(FAS216_Info *info, Scsi_Cmnd *SCpnt) +{ + int tot_msglen; + + /* following what the ESP driver says */ + fas216_set_stc(info, 0); + fas216_cmd(info, CMD_NOP | CMD_WITHDMA); + + /* flush FIFO */ + fas216_cmd(info, CMD_FLUSHFIFO); + + /* load bus-id and timeout */ + fas216_writeb(info, REG_SDID, BUSID(SCpnt->device->id)); + fas216_writeb(info, REG_STIM, info->ifcfg.select_timeout); + + /* synchronous transfers */ + fas216_set_sync(info, SCpnt->device->id); + + tot_msglen = msgqueue_msglength(&info->scsi.msgs); + +#ifdef DEBUG_MESSAGES + { + struct message *msg; + int msgnr = 0, i; + + printk("scsi%d.%c: message out: ", + info->host->host_no, '0' + SCpnt->device->id); + while ((msg = msgqueue_getmsg(&info->scsi.msgs, msgnr++)) != NULL) { + printk("{ "); + for (i = 0; i < msg->length; i++) + printk("%02x ", msg->msg[i]); + printk("} "); + } + printk("\n"); + } +#endif + + if (tot_msglen == 1 || tot_msglen == 3) { + /* + * We have an easy message length to send... + */ + struct message *msg; + int msgnr = 0, i; + + info->scsi.phase = PHASE_SELSTEPS; + + /* load message bytes */ + while ((msg = msgqueue_getmsg(&info->scsi.msgs, msgnr++)) != NULL) { + for (i = 0; i < msg->length; i++) + fas216_writeb(info, REG_FF, msg->msg[i]); + msg->fifo = tot_msglen - (fas216_readb(info, REG_CFIS) & CFIS_CF); + } + + /* load command */ + for (i = 0; i < SCpnt->cmd_len; i++) + fas216_writeb(info, REG_FF, SCpnt->cmnd[i]); + + if (tot_msglen == 1) + fas216_cmd(info, CMD_SELECTATN); + else + fas216_cmd(info, CMD_SELECTATN3); + } else { + /* + * We have an unusual number of message bytes to send. + * Load first byte into fifo, and issue SELECT with ATN and + * stop steps. + */ + struct message *msg = msgqueue_getmsg(&info->scsi.msgs, 0); + + fas216_writeb(info, REG_FF, msg->msg[0]); + msg->fifo = 1; + + fas216_cmd(info, CMD_SELECTATNSTOP); + } +} + +/* + * Decide whether we need to perform a parity test on this device. + * Can also be used to force parity error conditions during initial + * information transfer phase (message out) for test purposes. + */ +static int parity_test(FAS216_Info *info, int target) +{ +#if 0 + if (target == 3) { + info->device[target].parity_check = 0; + return 1; + } +#endif + return info->device[target].parity_check; +} + +static void fas216_start_command(FAS216_Info *info, Scsi_Cmnd *SCpnt) +{ + int disconnect_ok; + + /* + * claim host busy + */ + info->scsi.phase = PHASE_SELECTION; + info->scsi.SCp = SCpnt->SCp; + info->SCpnt = SCpnt; + info->dma.transfer_type = fasdma_none; + + if (parity_test(info, SCpnt->device->id)) + fas216_writeb(info, REG_CNTL1, info->scsi.cfg[0] | CNTL1_PTE); + else + fas216_writeb(info, REG_CNTL1, info->scsi.cfg[0]); + + /* + * Don't allow request sense commands to disconnect. + */ + disconnect_ok = SCpnt->cmnd[0] != REQUEST_SENSE && + info->device[SCpnt->device->id].disconnect_ok; + + /* + * build outgoing message bytes + */ + msgqueue_flush(&info->scsi.msgs); + msgqueue_addmsg(&info->scsi.msgs, 1, IDENTIFY(disconnect_ok, SCpnt->device->lun)); + + /* + * add tag message if required + */ + if (SCpnt->tag) + msgqueue_addmsg(&info->scsi.msgs, 2, SIMPLE_QUEUE_TAG, SCpnt->tag); + + do { +#ifdef SCSI2_SYNC + if ((info->device[SCpnt->device->id].sync_state == neg_wait || + info->device[SCpnt->device->id].sync_state == neg_complete) && + (SCpnt->cmnd[0] == REQUEST_SENSE || + SCpnt->cmnd[0] == INQUIRY)) { + info->device[SCpnt->device->id].sync_state = neg_inprogress; + msgqueue_addmsg(&info->scsi.msgs, 5, + EXTENDED_MESSAGE, 3, EXTENDED_SDTR, + 1000 / info->ifcfg.clockrate, + info->ifcfg.sync_max_depth); + break; + } +#endif + } while (0); + + __fas216_start_command(info, SCpnt); +} + +static void fas216_allocate_tag(FAS216_Info *info, Scsi_Cmnd *SCpnt) +{ +#ifdef SCSI2_TAG + /* + * tagged queuing - allocate a new tag to this command + */ + if (SCpnt->device->simple_tags && SCpnt->cmnd[0] != REQUEST_SENSE && + SCpnt->cmnd[0] != INQUIRY) { + SCpnt->device->current_tag += 1; + if (SCpnt->device->current_tag == 0) + SCpnt->device->current_tag = 1; + SCpnt->tag = SCpnt->device->current_tag; + } else +#endif + set_bit(SCpnt->device->id * 8 + SCpnt->device->lun, info->busyluns); + + info->stats.removes += 1; + switch (SCpnt->cmnd[0]) { + case WRITE_6: + case WRITE_10: + case WRITE_12: + info->stats.writes += 1; + break; + case READ_6: + case READ_10: + case READ_12: + info->stats.reads += 1; + break; + default: + info->stats.miscs += 1; + break; + } +} + +static void fas216_do_bus_device_reset(FAS216_Info *info, Scsi_Cmnd *SCpnt) +{ + struct message *msg; + + /* + * claim host busy + */ + info->scsi.phase = PHASE_SELECTION; + info->scsi.SCp = SCpnt->SCp; + info->SCpnt = SCpnt; + info->dma.transfer_type = fasdma_none; + + fas216_log(info, LOG_ERROR, "sending bus device reset"); + + msgqueue_flush(&info->scsi.msgs); + msgqueue_addmsg(&info->scsi.msgs, 1, BUS_DEVICE_RESET); + + /* following what the ESP driver says */ + fas216_set_stc(info, 0); + fas216_cmd(info, CMD_NOP | CMD_WITHDMA); + + /* flush FIFO */ + fas216_cmd(info, CMD_FLUSHFIFO); + + /* load bus-id and timeout */ + fas216_writeb(info, REG_SDID, BUSID(SCpnt->device->id)); + fas216_writeb(info, REG_STIM, info->ifcfg.select_timeout); + + /* synchronous transfers */ + fas216_set_sync(info, SCpnt->device->id); + + msg = msgqueue_getmsg(&info->scsi.msgs, 0); + + fas216_writeb(info, REG_FF, BUS_DEVICE_RESET); + msg->fifo = 1; + + fas216_cmd(info, CMD_SELECTATNSTOP); +} + +/** + * fas216_kick - kick a command to the interface + * @info: our host interface to kick + * + * Kick a command to the interface, interface should be idle. + * Notes: Interrupts are always disabled! + */ +static void fas216_kick(FAS216_Info *info) +{ + Scsi_Cmnd *SCpnt = NULL; +#define TYPE_OTHER 0 +#define TYPE_RESET 1 +#define TYPE_QUEUE 2 + int where_from = TYPE_OTHER; + + fas216_checkmagic(info); + + /* + * Obtain the next command to process. + */ + do { + if (info->rstSCpnt) { + SCpnt = info->rstSCpnt; + /* don't remove it */ + where_from = TYPE_RESET; + break; + } + + if (info->reqSCpnt) { + SCpnt = info->reqSCpnt; + info->reqSCpnt = NULL; + break; + } + + if (info->origSCpnt) { + SCpnt = info->origSCpnt; + info->origSCpnt = NULL; + break; + } + + /* retrieve next command */ + if (!SCpnt) { + SCpnt = queue_remove_exclude(&info->queues.issue, + info->busyluns); + where_from = TYPE_QUEUE; + break; + } + } while (0); + + if (!SCpnt) { + /* + * no command pending, so enable reselection. + */ + fas216_cmd(info, CMD_ENABLESEL); + return; + } + + /* + * We're going to start a command, so disable reselection + */ + fas216_cmd(info, CMD_DISABLESEL); + + if (info->scsi.disconnectable && info->SCpnt) { + fas216_log(info, LOG_CONNECT, + "moved command for %d to disconnected queue", + info->SCpnt->device->id); + queue_add_cmd_tail(&info->queues.disconnected, info->SCpnt); + info->scsi.disconnectable = 0; + info->SCpnt = NULL; + } + + fas216_log_command(info, LOG_CONNECT | LOG_MESSAGES, SCpnt, + "starting"); + + switch (where_from) { + case TYPE_QUEUE: + fas216_allocate_tag(info, SCpnt); + case TYPE_OTHER: + fas216_start_command(info, SCpnt); + break; + case TYPE_RESET: + fas216_do_bus_device_reset(info, SCpnt); + break; + } + + fas216_log(info, LOG_CONNECT, "select: data pointers [%p, %X]", + info->scsi.SCp.ptr, info->scsi.SCp.this_residual); + + /* + * should now get either DISCONNECT or + * (FUNCTION DONE with BUS SERVICE) interrupt + */ +} + +/* + * Clean up from issuing a BUS DEVICE RESET message to a device. + */ +static void +fas216_devicereset_done(FAS216_Info *info, Scsi_Cmnd *SCpnt, unsigned int result) +{ + fas216_log(info, LOG_ERROR, "fas216 device reset complete"); + + info->rstSCpnt = NULL; + info->rst_dev_status = 1; + wake_up(&info->eh_wait); +} + +/** + * fas216_rq_sns_done - Finish processing automatic request sense command + * @info: interface that completed + * @SCpnt: command that completed + * @result: driver byte of result + * + * Finish processing automatic request sense command + */ +static void +fas216_rq_sns_done(FAS216_Info *info, Scsi_Cmnd *SCpnt, unsigned int result) +{ + fas216_log_target(info, LOG_CONNECT, SCpnt->device->id, + "request sense complete, result=0x%04x%02x%02x", + result, SCpnt->SCp.Message, SCpnt->SCp.Status); + + if (result != DID_OK || SCpnt->SCp.Status != GOOD) + /* + * Something went wrong. Make sure that we don't + * have valid data in the sense buffer that could + * confuse the higher levels. + */ + memset(SCpnt->sense_buffer, 0, sizeof(SCpnt->sense_buffer)); +//printk("scsi%d.%c: sense buffer: ", info->host->host_no, '0' + SCpnt->device->id); +//{ int i; for (i = 0; i < 32; i++) printk("%02x ", SCpnt->sense_buffer[i]); printk("\n"); } + /* + * Note that we don't set SCpnt->result, since that should + * reflect the status of the command that we were asked by + * the upper layers to process. This would have been set + * correctly by fas216_std_done. + */ + SCpnt->scsi_done(SCpnt); +} + +/** + * fas216_std_done - finish processing of standard command + * @info: interface that completed + * @SCpnt: command that completed + * @result: driver byte of result + * + * Finish processing of standard command + */ +static void +fas216_std_done(FAS216_Info *info, Scsi_Cmnd *SCpnt, unsigned int result) +{ + info->stats.fins += 1; + + SCpnt->result = result << 16 | info->scsi.SCp.Message << 8 | + info->scsi.SCp.Status; + + fas216_log_command(info, LOG_CONNECT, SCpnt, + "command complete, result=0x%08x", SCpnt->result); + + /* + * If the driver detected an error, we're all done. + */ + if (host_byte(SCpnt->result) != DID_OK || + msg_byte(SCpnt->result) != COMMAND_COMPLETE) + goto done; + + /* + * If the command returned CHECK_CONDITION or COMMAND_TERMINATED + * status, request the sense information. + */ + if (status_byte(SCpnt->result) == CHECK_CONDITION || + status_byte(SCpnt->result) == COMMAND_TERMINATED) + goto request_sense; + + /* + * If the command did not complete with GOOD status, + * we are all done here. + */ + if (status_byte(SCpnt->result) != GOOD) + goto done; + + /* + * We have successfully completed a command. Make sure that + * we do not have any buffers left to transfer. The world + * is not perfect, and we seem to occasionally hit this. + * It can be indicative of a buggy driver, target or the upper + * levels of the SCSI code. + */ + if (info->scsi.SCp.ptr) { + switch (SCpnt->cmnd[0]) { + case INQUIRY: + case START_STOP: + case MODE_SENSE: + break; + + default: + printk(KERN_ERR "scsi%d.%c: incomplete data transfer " + "detected: res=%08X ptr=%p len=%X CDB: ", + info->host->host_no, '0' + SCpnt->device->id, + SCpnt->result, info->scsi.SCp.ptr, + info->scsi.SCp.this_residual); + print_command(SCpnt->cmnd); + SCpnt->result &= ~(255 << 16); + SCpnt->result |= DID_BAD_TARGET << 16; + goto request_sense; + } + } + +done: + if (SCpnt->scsi_done) { + SCpnt->scsi_done(SCpnt); + return; + } + + panic("scsi%d.H: null scsi_done function in fas216_done", + info->host->host_no); + + +request_sense: + if (SCpnt->cmnd[0] == REQUEST_SENSE) + goto done; + + fas216_log_target(info, LOG_CONNECT, SCpnt->device->id, + "requesting sense"); + memset(SCpnt->cmnd, 0, sizeof (SCpnt->cmnd)); + SCpnt->cmnd[0] = REQUEST_SENSE; + SCpnt->cmnd[1] = SCpnt->device->lun << 5; + SCpnt->cmnd[4] = sizeof(SCpnt->sense_buffer); + SCpnt->cmd_len = COMMAND_SIZE(SCpnt->cmnd[0]); + SCpnt->SCp.buffer = NULL; + SCpnt->SCp.buffers_residual = 0; + SCpnt->SCp.ptr = (char *)SCpnt->sense_buffer; + SCpnt->SCp.this_residual = sizeof(SCpnt->sense_buffer); + SCpnt->SCp.Message = 0; + SCpnt->SCp.Status = 0; + SCpnt->request_bufflen = sizeof(SCpnt->sense_buffer); + SCpnt->sc_data_direction = SCSI_DATA_READ; + SCpnt->use_sg = 0; + SCpnt->tag = 0; + SCpnt->host_scribble = (void *)fas216_rq_sns_done; + + /* + * Place this command into the high priority "request + * sense" slot. This will be the very next command + * executed, unless a target connects to us. + */ + if (info->reqSCpnt) + printk(KERN_WARNING "scsi%d.%c: loosing request command\n", + info->host->host_no, '0' + SCpnt->device->id); + info->reqSCpnt = SCpnt; +} + +/** + * fas216_done - complete processing for current command + * @info: interface that completed + * @result: driver byte of result + * + * Complete processing for current command + */ +static void fas216_done(FAS216_Info *info, unsigned int result) +{ + void (*fn)(FAS216_Info *, Scsi_Cmnd *, unsigned int); + Scsi_Cmnd *SCpnt; + unsigned long flags; + + fas216_checkmagic(info); + + if (!info->SCpnt) + goto no_command; + + SCpnt = info->SCpnt; + info->SCpnt = NULL; + info->scsi.phase = PHASE_IDLE; + + if (info->scsi.aborting) { + fas216_log(info, 0, "uncaught abort - returning DID_ABORT"); + result = DID_ABORT; + info->scsi.aborting = 0; + } + + /* + * Sanity check the completion - if we have zero bytes left + * to transfer, we should not have a valid pointer. + */ + if (info->scsi.SCp.ptr && info->scsi.SCp.this_residual == 0) { + printk("scsi%d.%c: zero bytes left to transfer, but " + "buffer pointer still valid: ptr=%p len=%08x CDB: ", + info->host->host_no, '0' + SCpnt->device->id, + info->scsi.SCp.ptr, info->scsi.SCp.this_residual); + info->scsi.SCp.ptr = NULL; + print_command(SCpnt->cmnd); + } + + /* + * Clear down this command as completed. If we need to request + * the sense information, fas216_kick will re-assert the busy + * status. + */ + info->device[SCpnt->device->id].parity_check = 0; + clear_bit(SCpnt->device->id * 8 + SCpnt->device->lun, info->busyluns); + + fn = (void (*)(FAS216_Info *, Scsi_Cmnd *, unsigned int))SCpnt->host_scribble; + fn(info, SCpnt, result); + + if (info->scsi.irq != NO_IRQ) { + spin_lock_irqsave(&info->host_lock, flags); + if (info->scsi.phase == PHASE_IDLE) + fas216_kick(info); + spin_unlock_irqrestore(&info->host_lock, flags); + } + return; + +no_command: + panic("scsi%d.H: null command in fas216_done", + info->host->host_no); +} + +/** + * fas216_queue_command - queue a command for adapter to process. + * @SCpnt: Command to queue + * @done: done function to call once command is complete + * + * Queue a command for adapter to process. + * Returns: 0 on success, else error. + * Notes: io_request_lock is held, interrupts are disabled. + */ +int fas216_queue_command(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *)) +{ + FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata; + int result; + + fas216_checkmagic(info); + + fas216_log_command(info, LOG_CONNECT, SCpnt, + "received command (%p)", SCpnt); + + SCpnt->scsi_done = done; + SCpnt->host_scribble = (void *)fas216_std_done; + SCpnt->result = 0; + + init_SCp(SCpnt); + + info->stats.queues += 1; + SCpnt->tag = 0; + + spin_lock(&info->host_lock); + + /* + * Add command into execute queue and let it complete under + * whatever scheme we're using. + */ + result = !queue_add_cmd_ordered(&info->queues.issue, SCpnt); + + /* + * If we successfully added the command, + * kick the interface to get it moving. + */ + if (result == 0 && info->scsi.phase == PHASE_IDLE) + fas216_kick(info); + spin_unlock(&info->host_lock); + + fas216_log_target(info, LOG_CONNECT, -1, "queue %s", + result ? "failure" : "success"); + + return result; +} + +/** + * fas216_internal_done - trigger restart of a waiting thread in fas216_noqueue_command + * @SCpnt: Command to wake + * + * Trigger restart of a waiting thread in fas216_command + */ +static void fas216_internal_done(Scsi_Cmnd *SCpnt) +{ + FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata; + + fas216_checkmagic(info); + + info->internal_done = 1; +} + +/** + * fas216_noqueue_command - process a command for the adapter. + * @SCpnt: Command to queue + * + * Queue a command for adapter to process. + * Returns: scsi result code. + * Notes: io_request_lock is held, interrupts are disabled. + */ +int fas216_noqueue_command(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *)) +{ + FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata; + + fas216_checkmagic(info); + + /* + * We should only be using this if we don't have an interrupt. + * Provide some "incentive" to use the queueing code. + */ + BUG_ON(info->scsi.irq != NO_IRQ); + + info->internal_done = 0; + fas216_queue_command(SCpnt, fas216_internal_done); + + /* + * This wastes time, since we can't return until the command is + * complete. We can't sleep either since we may get re-entered! + * However, we must re-enable interrupts, or else we'll be + * waiting forever. + */ + spin_unlock_irq(info->host->host_lock); + + while (!info->internal_done) { + /* + * If we don't have an IRQ, then we must poll the card for + * it's interrupt, and use that to call this driver's + * interrupt routine. That way, we keep the command + * progressing. Maybe we can add some inteligence here + * and go to sleep if we know that the device is going + * to be some time (eg, disconnected). + */ + if (fas216_readb(info, REG_STAT) & STAT_INT) { + spin_lock_irq(info->host->host_lock); + fas216_intr(info); + spin_unlock_irq(info->host->host_lock); + } + } + + spin_lock_irq(info->host->host_lock); + + done(SCpnt); + + return 0; +} + +/* + * Error handler timeout function. Indicate that we timed out, + * and wake up any error handler process so it can continue. + */ +static void fas216_eh_timer(unsigned long data) +{ + FAS216_Info *info = (FAS216_Info *)data; + + fas216_log(info, LOG_ERROR, "error handling timed out\n"); + + del_timer(&info->eh_timer); + + if (info->rst_bus_status == 0) + info->rst_bus_status = -1; + if (info->rst_dev_status == 0) + info->rst_dev_status = -1; + + wake_up(&info->eh_wait); +} + +enum res_find { + res_failed, /* not found */ + res_success, /* command on issue queue */ + res_hw_abort /* command on disconnected dev */ +}; + +/** + * fas216_do_abort - decide how to abort a command + * @SCpnt: command to abort + * + * Decide how to abort a command. + * Returns: abort status + */ +static enum res_find fas216_find_command(FAS216_Info *info, Scsi_Cmnd *SCpnt) +{ + enum res_find res = res_failed; + + if (queue_remove_cmd(&info->queues.issue, SCpnt)) { + /* + * The command was on the issue queue, and has not been + * issued yet. We can remove the command from the queue, + * and acknowledge the abort. Neither the device nor the + * interface know about the command. + */ + printk("on issue queue "); + + res = res_success; + } else if (queue_remove_cmd(&info->queues.disconnected, SCpnt)) { + /* + * The command was on the disconnected queue. We must + * reconnect with the device if possible, and send it + * an abort message. + */ + printk("on disconnected queue "); + + res = res_hw_abort; + } else if (info->SCpnt == SCpnt) { + printk("executing "); + + switch (info->scsi.phase) { + /* + * If the interface is idle, and the command is 'disconnectable', + * then it is the same as on the disconnected queue. + */ + case PHASE_IDLE: + if (info->scsi.disconnectable) { + info->scsi.disconnectable = 0; + info->SCpnt = NULL; + res = res_hw_abort; + } + break; + + default: + break; + } + } else if (info->origSCpnt == SCpnt) { + /* + * The command will be executed next, but a command + * is currently using the interface. This is similar to + * being on the issue queue, except the busylun bit has + * been set. + */ + info->origSCpnt = NULL; + clear_bit(SCpnt->device->id * 8 + SCpnt->device->lun, info->busyluns); + printk("waiting for execution "); + res = res_success; + } else + printk("unknown "); + + return res; +} + +/** + * fas216_eh_abort - abort this command + * @SCpnt: command to abort + * + * Abort this command. + * Returns: FAILED if unable to abort + * Notes: io_request_lock is taken, and irqs are disabled + */ +int fas216_eh_abort(Scsi_Cmnd *SCpnt) +{ + FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata; + int result = FAILED; + + fas216_checkmagic(info); + + info->stats.aborts += 1; + + printk(KERN_WARNING "scsi%d: abort command ", info->host->host_no); + print_command(SCpnt->data_cmnd); + + print_debug_list(); + fas216_dumpstate(info); + + printk(KERN_WARNING "scsi%d: abort %p ", info->host->host_no, SCpnt); + + switch (fas216_find_command(info, SCpnt)) { + /* + * We found the command, and cleared it out. Either + * the command is still known to be executing on the + * target, or the busylun bit is not set. + */ + case res_success: + printk("success\n"); + result = SUCCESS; + break; + + /* + * We need to reconnect to the target and send it an + * ABORT or ABORT_TAG message. We can only do this + * if the bus is free. + */ + case res_hw_abort: + + + /* + * We are unable to abort the command for some reason. + */ + default: + case res_failed: + printk("failed\n"); + break; + } + + return result; +} + +/** + * fas216_eh_device_reset - Reset the device associated with this command + * @SCpnt: command specifing device to reset + * + * Reset the device associated with this command. + * Returns: FAILED if unable to reset. + * Notes: We won't be re-entered, so we'll only have one device + * reset on the go at one time. + */ +int fas216_eh_device_reset(Scsi_Cmnd *SCpnt) +{ + FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata; + unsigned long flags; + int i, res = FAILED, target = SCpnt->device->id; + + fas216_log(info, LOG_ERROR, "device reset for target %d", target); + + spin_lock_irqsave(&info->host_lock, flags); + + do { + /* + * If we are currently connected to a device, and + * it is the device we want to reset, there is + * nothing we can do here. Chances are it is stuck, + * and we need a bus reset. + */ + if (info->SCpnt && !info->scsi.disconnectable && + info->SCpnt->device->id == SCpnt->device->id) + break; + + /* + * We're going to be resetting this device. Remove + * all pending commands from the driver. By doing + * so, we guarantee that we won't touch the command + * structures except to process the reset request. + */ + queue_remove_all_target(&info->queues.issue, target); + queue_remove_all_target(&info->queues.disconnected, target); + if (info->origSCpnt && info->origSCpnt->device->id == target) + info->origSCpnt = NULL; + if (info->reqSCpnt && info->reqSCpnt->device->id == target) + info->reqSCpnt = NULL; + for (i = 0; i < 8; i++) + clear_bit(target * 8 + i, info->busyluns); + + /* + * Hijack this SCSI command structure to send + * a bus device reset message to this device. + */ + SCpnt->host_scribble = (void *)fas216_devicereset_done; + + info->rst_dev_status = 0; + info->rstSCpnt = SCpnt; + + if (info->scsi.phase == PHASE_IDLE) + fas216_kick(info); + + mod_timer(&info->eh_timer, 30 * HZ); + spin_unlock_irqrestore(&info->host_lock, flags); + + /* + * Wait up to 30 seconds for the reset to complete. + */ + wait_event(info->eh_wait, info->rst_dev_status); + + del_timer_sync(&info->eh_timer); + spin_lock_irqsave(&info->host_lock, flags); + info->rstSCpnt = NULL; + + if (info->rst_dev_status == 1) + res = SUCCESS; + } while (0); + + SCpnt->host_scribble = NULL; + spin_unlock_irqrestore(&info->host_lock, flags); + + fas216_log(info, LOG_ERROR, "device reset complete: %s\n", + res == SUCCESS ? "success" : "failed"); + + return res; +} + +/** + * fas216_eh_bus_reset - Reset the bus associated with the command + * @SCpnt: command specifing bus to reset + * + * Reset the bus associated with the command. + * Returns: FAILED if unable to reset. + * Notes: Further commands are blocked. + */ +int fas216_eh_bus_reset(Scsi_Cmnd *SCpnt) +{ + FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata; + unsigned long flags; + Scsi_Device *SDpnt; + + fas216_checkmagic(info); + fas216_log(info, LOG_ERROR, "resetting bus"); + + info->stats.bus_resets += 1; + + spin_lock_irqsave(&info->host_lock, flags); + + /* + * Stop all activity on this interface. + */ + fas216_aborttransfer(info); + fas216_writeb(info, REG_CNTL3, info->scsi.cfg[2]); + + /* + * Clear any pending interrupts. + */ + while (fas216_readb(info, REG_STAT) & STAT_INT) + fas216_readb(info, REG_INST); + + info->rst_bus_status = 0; + + /* + * For each attached hard-reset device, clear out + * all command structures. Leave the running + * command in place. + */ + shost_for_each_device(SDpnt, info->host) { + int i; + + if (SDpnt->soft_reset) + continue; + + queue_remove_all_target(&info->queues.issue, SDpnt->id); + queue_remove_all_target(&info->queues.disconnected, SDpnt->id); + if (info->origSCpnt && info->origSCpnt->device->id == SDpnt->id) + info->origSCpnt = NULL; + if (info->reqSCpnt && info->reqSCpnt->device->id == SDpnt->id) + info->reqSCpnt = NULL; + info->SCpnt = NULL; + + for (i = 0; i < 8; i++) + clear_bit(SDpnt->id * 8 + i, info->busyluns); + } + + info->scsi.phase = PHASE_IDLE; + + /* + * Reset the SCSI bus. Device cleanup happens in + * the interrupt handler. + */ + fas216_cmd(info, CMD_RESETSCSI); + + mod_timer(&info->eh_timer, jiffies + HZ); + spin_unlock_irqrestore(&info->host_lock, flags); + + /* + * Wait one second for the interrupt. + */ + wait_event(info->eh_wait, info->rst_bus_status); + del_timer_sync(&info->eh_timer); + + fas216_log(info, LOG_ERROR, "bus reset complete: %s\n", + info->rst_bus_status == 1 ? "success" : "failed"); + + return info->rst_bus_status == 1 ? SUCCESS : FAILED; +} + +/** + * fas216_init_chip - Initialise FAS216 state after reset + * @info: state structure for interface + * + * Initialise FAS216 state after reset + */ +static void fas216_init_chip(FAS216_Info *info) +{ + unsigned int clock = ((info->ifcfg.clockrate - 1) / 5 + 1) & 7; + fas216_writeb(info, REG_CLKF, clock); + fas216_writeb(info, REG_CNTL1, info->scsi.cfg[0]); + fas216_writeb(info, REG_CNTL2, info->scsi.cfg[1]); + fas216_writeb(info, REG_CNTL3, info->scsi.cfg[2]); + fas216_writeb(info, REG_STIM, info->ifcfg.select_timeout); + fas216_writeb(info, REG_SOF, 0); + fas216_writeb(info, REG_STP, info->scsi.async_stp); + fas216_writeb(info, REG_CNTL1, info->scsi.cfg[0]); +} + +/** + * fas216_eh_host_reset - Reset the host associated with this command + * @SCpnt: command specifing host to reset + * + * Reset the host associated with this command. + * Returns: FAILED if unable to reset. + * Notes: io_request_lock is taken, and irqs are disabled + */ +int fas216_eh_host_reset(Scsi_Cmnd *SCpnt) +{ + FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata; + + fas216_checkmagic(info); + + printk("scsi%d.%c: %s: resetting host\n", + info->host->host_no, '0' + SCpnt->device->id, __FUNCTION__); + + /* + * Reset the SCSI chip. + */ + fas216_cmd(info, CMD_RESETCHIP); + + /* + * Ugly ugly ugly! + * We need to release the host_lock and enable + * IRQs if we sleep, but we must relock and disable + * IRQs after the sleep. + */ + spin_unlock_irq(info->host->host_lock); + msleep(50 * 1000/100); + spin_lock_irq(info->host->host_lock); + + /* + * Release the SCSI reset. + */ + fas216_cmd(info, CMD_NOP); + + fas216_init_chip(info); + + return SUCCESS; +} + +#define TYPE_UNKNOWN 0 +#define TYPE_NCR53C90 1 +#define TYPE_NCR53C90A 2 +#define TYPE_NCR53C9x 3 +#define TYPE_Am53CF94 4 +#define TYPE_EmFAS216 5 +#define TYPE_QLFAS216 6 + +static char *chip_types[] = { + "unknown", + "NS NCR53C90", + "NS NCR53C90A", + "NS NCR53C9x", + "AMD Am53CF94", + "Emulex FAS216", + "QLogic FAS216" +}; + +static int fas216_detect_type(FAS216_Info *info) +{ + int family, rev; + + /* + * Reset the chip. + */ + fas216_writeb(info, REG_CMD, CMD_RESETCHIP); + udelay(50); + fas216_writeb(info, REG_CMD, CMD_NOP); + + /* + * Check to see if control reg 2 is present. + */ + fas216_writeb(info, REG_CNTL3, 0); + fas216_writeb(info, REG_CNTL2, CNTL2_S2FE); + + /* + * If we are unable to read back control reg 2 + * correctly, it is not present, and we have a + * NCR53C90. + */ + if ((fas216_readb(info, REG_CNTL2) & (~0xe0)) != CNTL2_S2FE) + return TYPE_NCR53C90; + + /* + * Now, check control register 3 + */ + fas216_writeb(info, REG_CNTL2, 0); + fas216_writeb(info, REG_CNTL3, 0); + fas216_writeb(info, REG_CNTL3, 5); + + /* + * If we are unable to read the register back + * correctly, we have a NCR53C90A + */ + if (fas216_readb(info, REG_CNTL3) != 5) + return TYPE_NCR53C90A; + + /* + * Now read the ID from the chip. + */ + fas216_writeb(info, REG_CNTL3, 0); + + fas216_writeb(info, REG_CNTL3, CNTL3_ADIDCHK); + fas216_writeb(info, REG_CNTL3, 0); + + fas216_writeb(info, REG_CMD, CMD_RESETCHIP); + udelay(50); + fas216_writeb(info, REG_CMD, CMD_WITHDMA | CMD_NOP); + + fas216_writeb(info, REG_CNTL2, CNTL2_ENF); + fas216_writeb(info, REG_CMD, CMD_RESETCHIP); + udelay(50); + fas216_writeb(info, REG_CMD, CMD_NOP); + + rev = fas216_readb(info, REG_ID); + family = rev >> 3; + rev &= 7; + + switch (family) { + case 0x01: + if (rev == 4) + return TYPE_Am53CF94; + break; + + case 0x02: + switch (rev) { + case 2: + return TYPE_EmFAS216; + case 3: + return TYPE_QLFAS216; + } + break; + + default: + break; + } + printk("family %x rev %x\n", family, rev); + return TYPE_NCR53C9x; +} + +/** + * fas216_reset_state - Initialise driver internal state + * @info: state to initialise + * + * Initialise driver internal state + */ +static void fas216_reset_state(FAS216_Info *info) +{ + int i; + + fas216_checkmagic(info); + + fas216_bus_reset(info); + + /* + * Clear out all stale info in our state structure + */ + memset(info->busyluns, 0, sizeof(info->busyluns)); + info->scsi.disconnectable = 0; + info->scsi.aborting = 0; + + for (i = 0; i < 8; i++) { + info->device[i].parity_enabled = 0; + info->device[i].parity_check = 1; + } + + /* + * Drain all commands on disconnected queue + */ + while (queue_remove(&info->queues.disconnected) != NULL); + + /* + * Remove executing commands. + */ + info->SCpnt = NULL; + info->reqSCpnt = NULL; + info->rstSCpnt = NULL; + info->origSCpnt = NULL; +} + +/** + * fas216_init - initialise FAS/NCR/AMD SCSI structures. + * @host: a driver-specific filled-out structure + * + * Initialise FAS/NCR/AMD SCSI structures. + * Returns: 0 on success + */ +int fas216_init(struct Scsi_Host *host) +{ + FAS216_Info *info = (FAS216_Info *)host->hostdata; + + info->magic_start = MAGIC; + info->magic_end = MAGIC; + info->host = host; + info->scsi.cfg[0] = host->this_id | CNTL1_PERE; + info->scsi.cfg[1] = CNTL2_ENF | CNTL2_S2FE; + info->scsi.cfg[2] = info->ifcfg.cntl3 | + CNTL3_ADIDCHK | CNTL3_QTAG | CNTL3_G2CB | CNTL3_LBTM; + info->scsi.async_stp = fas216_syncperiod(info, info->ifcfg.asyncperiod); + + info->rst_dev_status = -1; + info->rst_bus_status = -1; + init_waitqueue_head(&info->eh_wait); + init_timer(&info->eh_timer); + info->eh_timer.data = (unsigned long)info; + info->eh_timer.function = fas216_eh_timer; + + spin_lock_init(&info->host_lock); + + memset(&info->stats, 0, sizeof(info->stats)); + + msgqueue_initialise(&info->scsi.msgs); + + if (!queue_initialise(&info->queues.issue)) + return -ENOMEM; + + if (!queue_initialise(&info->queues.disconnected)) { + queue_free(&info->queues.issue); + return -ENOMEM; + } + + return 0; +} + +/** + * fas216_add - initialise FAS/NCR/AMD SCSI ic. + * @host: a driver-specific filled-out structure + * @dev: parent device + * + * Initialise FAS/NCR/AMD SCSI ic. + * Returns: 0 on success + */ +int fas216_add(struct Scsi_Host *host, struct device *dev) +{ + FAS216_Info *info = (FAS216_Info *)host->hostdata; + int type, ret; + + if (info->ifcfg.clockrate <= 10 || info->ifcfg.clockrate > 40) { + printk(KERN_CRIT "fas216: invalid clock rate %u MHz\n", + info->ifcfg.clockrate); + return -EINVAL; + } + + fas216_reset_state(info); + type = fas216_detect_type(info); + info->scsi.type = chip_types[type]; + + udelay(300); + + /* + * Initialise the chip correctly. + */ + fas216_init_chip(info); + + /* + * Reset the SCSI bus. We don't want to see + * the resulting reset interrupt, so mask it + * out. + */ + fas216_writeb(info, REG_CNTL1, info->scsi.cfg[0] | CNTL1_DISR); + fas216_writeb(info, REG_CMD, CMD_RESETSCSI); + + /* + * scsi standard says wait 250ms + */ + spin_unlock_irq(info->host->host_lock); + msleep(100*1000/100); + spin_lock_irq(info->host->host_lock); + + fas216_writeb(info, REG_CNTL1, info->scsi.cfg[0]); + fas216_readb(info, REG_INST); + + fas216_checkmagic(info); + + ret = scsi_add_host(host, dev); + if (ret) + fas216_writeb(info, REG_CMD, CMD_RESETCHIP); + else + scsi_scan_host(host); + + return ret; +} + +void fas216_remove(struct Scsi_Host *host) +{ + FAS216_Info *info = (FAS216_Info *)host->hostdata; + + fas216_checkmagic(info); + scsi_remove_host(host); + + fas216_writeb(info, REG_CMD, CMD_RESETCHIP); + scsi_host_put(host); +} + +/** + * fas216_release - release all resources for FAS/NCR/AMD SCSI ic. + * @host: a driver-specific filled-out structure + * + * release all resources and put everything to bed for FAS/NCR/AMD SCSI ic. + */ +void fas216_release(struct Scsi_Host *host) +{ + FAS216_Info *info = (FAS216_Info *)host->hostdata; + + queue_free(&info->queues.disconnected); + queue_free(&info->queues.issue); +} + +int fas216_print_host(FAS216_Info *info, char *buffer) +{ + return sprintf(buffer, + "\n" + "Chip : %s\n" + " Address: 0x%p\n" + " IRQ : %d\n" + " DMA : %d\n", + info->scsi.type, info->scsi.io_base, + info->scsi.irq, info->scsi.dma); +} + +int fas216_print_stats(FAS216_Info *info, char *buffer) +{ + char *p = buffer; + + p += sprintf(p, "\n" + "Command Statistics:\n" + " Queued : %u\n" + " Issued : %u\n" + " Completed : %u\n" + " Reads : %u\n" + " Writes : %u\n" + " Others : %u\n" + " Disconnects: %u\n" + " Aborts : %u\n" + " Bus resets : %u\n" + " Host resets: %u\n", + info->stats.queues, info->stats.removes, + info->stats.fins, info->stats.reads, + info->stats.writes, info->stats.miscs, + info->stats.disconnects, info->stats.aborts, + info->stats.bus_resets, info->stats.host_resets); + + return p - buffer; +} + +int fas216_print_devices(FAS216_Info *info, char *buffer) +{ + struct fas216_device *dev; + Scsi_Device *scd; + char *p = buffer; + + p += sprintf(p, "Device/Lun TaggedQ Parity Sync\n"); + + shost_for_each_device(scd, info->host) { + dev = &info->device[scd->id]; + p += sprintf(p, " %d/%d ", scd->id, scd->lun); + if (scd->tagged_supported) + p += sprintf(p, "%3sabled(%3d) ", + scd->simple_tags ? "en" : "dis", + scd->current_tag); + else + p += sprintf(p, "unsupported "); + + p += sprintf(p, "%3sabled ", dev->parity_enabled ? "en" : "dis"); + + if (dev->sof) + p += sprintf(p, "offset %d, %d ns\n", + dev->sof, dev->period * 4); + else + p += sprintf(p, "async\n"); + } + + return p - buffer; +} + +EXPORT_SYMBOL(fas216_init); +EXPORT_SYMBOL(fas216_add); +EXPORT_SYMBOL(fas216_queue_command); +EXPORT_SYMBOL(fas216_noqueue_command); +EXPORT_SYMBOL(fas216_intr); +EXPORT_SYMBOL(fas216_remove); +EXPORT_SYMBOL(fas216_release); +EXPORT_SYMBOL(fas216_eh_abort); +EXPORT_SYMBOL(fas216_eh_device_reset); +EXPORT_SYMBOL(fas216_eh_bus_reset); +EXPORT_SYMBOL(fas216_eh_host_reset); +EXPORT_SYMBOL(fas216_print_host); +EXPORT_SYMBOL(fas216_print_stats); +EXPORT_SYMBOL(fas216_print_devices); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("Generic FAS216/NCR53C9x driver core"); +MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/arm/fas216.h b/drivers/scsi/arm/fas216.h new file mode 100644 index 00000000000..60a2a120205 --- /dev/null +++ b/drivers/scsi/arm/fas216.h @@ -0,0 +1,394 @@ +/* + * linux/drivers/acorn/scsi/fas216.h + * + * Copyright (C) 1997-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * FAS216 generic driver + */ +#ifndef FAS216_H +#define FAS216_H + +#ifndef NO_IRQ +#define NO_IRQ 255 +#endif + +#include "queue.h" +#include "msgqueue.h" + +/* FAS register definitions */ + +/* transfer count low */ +#define REG_CTCL (0) +#define REG_STCL (0) + +/* transfer count medium */ +#define REG_CTCM (1) +#define REG_STCM (1) + +/* fifo data */ +#define REG_FF (2) + +/* command */ +#define REG_CMD (3) +#define CMD_NOP 0x00 +#define CMD_FLUSHFIFO 0x01 +#define CMD_RESETCHIP 0x02 +#define CMD_RESETSCSI 0x03 + +#define CMD_TRANSFERINFO 0x10 +#define CMD_INITCMDCOMPLETE 0x11 +#define CMD_MSGACCEPTED 0x12 +#define CMD_PADBYTES 0x18 +#define CMD_SETATN 0x1a +#define CMD_RSETATN 0x1b + +#define CMD_SELECTWOATN 0x41 +#define CMD_SELECTATN 0x42 +#define CMD_SELECTATNSTOP 0x43 +#define CMD_ENABLESEL 0x44 +#define CMD_DISABLESEL 0x45 +#define CMD_SELECTATN3 0x46 +#define CMD_RESEL3 0x47 + +#define CMD_WITHDMA 0x80 + +/* status register (read) */ +#define REG_STAT (4) +#define STAT_IO (1 << 0) /* IO phase */ +#define STAT_CD (1 << 1) /* CD phase */ +#define STAT_MSG (1 << 2) /* MSG phase */ +#define STAT_TRANSFERDONE (1 << 3) /* Transfer completed */ +#define STAT_TRANSFERCNTZ (1 << 4) /* Transfer counter is zero */ +#define STAT_PARITYERROR (1 << 5) /* Parity error */ +#define STAT_REALBAD (1 << 6) /* Something bad */ +#define STAT_INT (1 << 7) /* Interrupt */ + +#define STAT_BUSMASK (STAT_MSG|STAT_CD|STAT_IO) +#define STAT_DATAOUT (0) /* Data out */ +#define STAT_DATAIN (STAT_IO) /* Data in */ +#define STAT_COMMAND (STAT_CD) /* Command out */ +#define STAT_STATUS (STAT_CD|STAT_IO) /* Status In */ +#define STAT_MESGOUT (STAT_MSG|STAT_CD) /* Message out */ +#define STAT_MESGIN (STAT_MSG|STAT_CD|STAT_IO) /* Message In */ + +/* bus ID for select / reselect */ +#define REG_SDID (4) +#define BUSID(target) ((target) & 7) + +/* Interrupt status register (read) */ +#define REG_INST (5) +#define INST_SELWOATN (1 << 0) /* Select w/o ATN */ +#define INST_SELATN (1 << 1) /* Select w/ATN */ +#define INST_RESELECTED (1 << 2) /* Reselected */ +#define INST_FUNCDONE (1 << 3) /* Function done */ +#define INST_BUSSERVICE (1 << 4) /* Bus service */ +#define INST_DISCONNECT (1 << 5) /* Disconnect */ +#define INST_ILLEGALCMD (1 << 6) /* Illegal command */ +#define INST_BUSRESET (1 << 7) /* SCSI Bus reset */ + +/* Timeout register (write) */ +#define REG_STIM (5) + +/* Sequence step register (read) */ +#define REG_IS (6) +#define IS_BITS 0x07 +#define IS_SELARB 0x00 /* Select & Arb ok */ +#define IS_MSGBYTESENT 0x01 /* One byte message sent*/ +#define IS_NOTCOMMAND 0x02 /* Not in command state */ +#define IS_EARLYPHASE 0x03 /* Early phase change */ +#define IS_COMPLETE 0x04 /* Command ok */ +#define IS_SOF 0x08 /* Sync off flag */ + +/* Transfer period step (write) */ +#define REG_STP (6) + +/* Synchronous Offset (write) */ +#define REG_SOF (7) + +/* Fifo state register (read) */ +#define REG_CFIS (7) +#define CFIS_CF 0x1f /* Num bytes in FIFO */ +#define CFIS_IS 0xe0 /* Step */ + +/* config register 1 */ +#define REG_CNTL1 (8) +#define CNTL1_CID (7 << 0) /* Chip ID */ +#define CNTL1_STE (1 << 3) /* Self test enable */ +#define CNTL1_PERE (1 << 4) /* Parity enable reporting en. */ +#define CNTL1_PTE (1 << 5) /* Parity test enable */ +#define CNTL1_DISR (1 << 6) /* Disable Irq on SCSI reset */ +#define CNTL1_ETM (1 << 7) /* Extended Timing Mode */ + +/* Clock conversion factor (read) */ +#define REG_CLKF (9) +#define CLKF_F37MHZ 0x00 /* 35.01 - 40 MHz */ +#define CLKF_F10MHZ 0x02 /* 10 MHz */ +#define CLKF_F12MHZ 0x03 /* 10.01 - 15 MHz */ +#define CLKF_F17MHZ 0x04 /* 15.01 - 20 MHz */ +#define CLKF_F22MHZ 0x05 /* 20.01 - 25 MHz */ +#define CLKF_F27MHZ 0x06 /* 25.01 - 30 MHz */ +#define CLKF_F32MHZ 0x07 /* 30.01 - 35 MHz */ + +/* Chip test register (write) */ +#define REG_FTM (10) +#define TEST_FTM 0x01 /* Force target mode */ +#define TEST_FIM 0x02 /* Force initiator mode */ +#define TEST_FHI 0x04 /* Force high impedance mode */ + +/* Configuration register 2 (read/write) */ +#define REG_CNTL2 (11) +#define CNTL2_PGDP (1 << 0) /* Pass Th/Generate Data Parity */ +#define CNTL2_PGRP (1 << 1) /* Pass Th/Generate Reg Parity */ +#define CNTL2_ACDPE (1 << 2) /* Abort on Cmd/Data Parity Err */ +#define CNTL2_S2FE (1 << 3) /* SCSI2 Features Enable */ +#define CNTL2_TSDR (1 << 4) /* Tristate DREQ */ +#define CNTL2_SBO (1 << 5) /* Select Byte Order */ +#define CNTL2_ENF (1 << 6) /* Enable features */ +#define CNTL2_DAE (1 << 7) /* Data Alignment Enable */ + +/* Configuration register 3 (read/write) */ +#define REG_CNTL3 (12) +#define CNTL3_BS8 (1 << 0) /* Burst size 8 */ +#define CNTL3_MDM (1 << 1) /* Modify DMA mode */ +#define CNTL3_LBTM (1 << 2) /* Last Byte Transfer mode */ +#define CNTL3_FASTCLK (1 << 3) /* Fast SCSI clocking */ +#define CNTL3_FASTSCSI (1 << 4) /* Fast SCSI */ +#define CNTL3_G2CB (1 << 5) /* Group2 SCSI support */ +#define CNTL3_QTAG (1 << 6) /* Enable 3 byte msgs */ +#define CNTL3_ADIDCHK (1 << 7) /* Additional ID check */ + +/* High transfer count (read/write) */ +#define REG_CTCH (14) +#define REG_STCH (14) + +/* ID register (read only) */ +#define REG_ID (14) + +/* Data alignment */ +#define REG_DAL (15) + +typedef enum { + PHASE_IDLE, /* we're not planning on doing anything */ + PHASE_SELECTION, /* selecting a device */ + PHASE_SELSTEPS, /* selection with command steps */ + PHASE_COMMAND, /* command sent */ + PHASE_MESSAGESENT, /* selected, and we're sending cmd */ + PHASE_DATAOUT, /* data out to device */ + PHASE_DATAIN, /* data in from device */ + PHASE_MSGIN, /* message in from device */ + PHASE_MSGIN_DISCONNECT, /* disconnecting from bus */ + PHASE_MSGOUT, /* after message out phase */ + PHASE_MSGOUT_EXPECT, /* expecting message out */ + PHASE_STATUS, /* status from device */ + PHASE_DONE /* Command complete */ +} phase_t; + +typedef enum { + DMA_OUT, /* DMA from memory to chip */ + DMA_IN /* DMA from chip to memory */ +} fasdmadir_t; + +typedef enum { + fasdma_none, /* No dma */ + fasdma_pio, /* PIO mode */ + fasdma_pseudo, /* Pseudo DMA */ + fasdma_real_block, /* Real DMA, on block by block basis */ + fasdma_real_all /* Real DMA, on request by request */ +} fasdmatype_t; + +typedef enum { + neg_wait, /* Negociate with device */ + neg_inprogress, /* Negociation sent */ + neg_complete, /* Negociation complete */ + neg_targcomplete, /* Target completed negociation */ + neg_invalid /* Negociation not supported */ +} neg_t; + +#define MAGIC 0x441296bdUL +#define NR_MSGS 8 + +#define FASCAP_DMA (1 << 0) +#define FASCAP_PSEUDODMA (1 << 1) + +typedef struct { + unsigned long magic_start; + spinlock_t host_lock; + struct Scsi_Host *host; /* host */ + Scsi_Cmnd *SCpnt; /* currently processing command */ + Scsi_Cmnd *origSCpnt; /* original connecting command */ + Scsi_Cmnd *reqSCpnt; /* request sense command */ + Scsi_Cmnd *rstSCpnt; /* reset command */ + Scsi_Cmnd *pending_SCpnt[8]; /* per-device pending commands */ + int next_pending; /* next pending device */ + + /* + * Error recovery + */ + wait_queue_head_t eh_wait; + struct timer_list eh_timer; + unsigned int rst_dev_status; + unsigned int rst_bus_status; + + /* driver information */ + struct { + phase_t phase; /* current phase */ + void __iomem *io_base; /* iomem base of FAS216 */ + unsigned int io_shift; /* shift to adjust reg offsets by */ + unsigned char cfg[4]; /* configuration registers */ + const char *type; /* chip type */ + unsigned int irq; /* interrupt */ + int dma; /* dma channel */ + + Scsi_Pointer SCp; /* current commands data pointer */ + + MsgQueue_t msgs; /* message queue for connected device */ + + unsigned int async_stp; /* Async transfer STP value */ + unsigned char msgin_fifo; /* bytes in fifo at time of message in */ + unsigned char message[256]; /* last message received from device */ + + unsigned char disconnectable:1; /* this command can be disconnected */ + unsigned char aborting:1; /* aborting command */ + } scsi; + + /* statistics information */ + struct { + unsigned int queues; + unsigned int removes; + unsigned int fins; + unsigned int reads; + unsigned int writes; + unsigned int miscs; + unsigned int disconnects; + unsigned int aborts; + unsigned int bus_resets; + unsigned int host_resets; + } stats; + + /* configuration information */ + struct { + unsigned char clockrate; /* clock rate of FAS device (MHz) */ + unsigned char select_timeout; /* timeout (R5) */ + unsigned char sync_max_depth; /* Synchronous xfer max fifo depth */ + unsigned char wide_max_size; /* Maximum wide transfer size */ + unsigned char cntl3; /* Control Reg 3 */ + unsigned int asyncperiod; /* Async transfer period (ns) */ + unsigned int capabilities; /* driver capabilities */ + unsigned int disconnect_ok:1; /* Disconnects allowed? */ + } ifcfg; + + /* queue handling */ + struct { + Queue_t issue; /* issue queue */ + Queue_t disconnected; /* disconnected command queue */ + } queues; + + /* per-device info */ + struct fas216_device { + unsigned char disconnect_ok:1; /* device can disconnect */ + unsigned char parity_enabled:1; /* parity checking enabled */ + unsigned char parity_check:1; /* need to check parity checking */ + unsigned char period; /* sync xfer period in (*4ns) */ + unsigned char stp; /* synchronous transfer period */ + unsigned char sof; /* synchronous offset register */ + unsigned char wide_xfer; /* currently negociated wide transfer */ + neg_t sync_state; /* synchronous transfer mode */ + neg_t wide_state; /* wide transfer mode */ + } device[8]; + unsigned long busyluns[64/sizeof(unsigned long)];/* array of bits indicating LUNs busy */ + + /* dma */ + struct { + fasdmatype_t transfer_type; /* current type of DMA transfer */ + fasdmatype_t (*setup) (struct Scsi_Host *host, Scsi_Pointer *SCp, fasdmadir_t direction, fasdmatype_t min_dma); + void (*pseudo)(struct Scsi_Host *host, Scsi_Pointer *SCp, fasdmadir_t direction, int transfer); + void (*stop) (struct Scsi_Host *host, Scsi_Pointer *SCp); + } dma; + + /* miscellaneous */ + int internal_done; /* flag to indicate request done */ + unsigned long magic_end; +} FAS216_Info; + +/* Function: int fas216_init (struct Scsi_Host *instance) + * Purpose : initialise FAS/NCR/AMD SCSI structures. + * Params : instance - a driver-specific filled-out structure + * Returns : 0 on success + */ +extern int fas216_init (struct Scsi_Host *instance); + +/* Function: int fas216_add (struct Scsi_Host *instance, struct device *dev) + * Purpose : initialise FAS/NCR/AMD SCSI ic. + * Params : instance - a driver-specific filled-out structure + * Returns : 0 on success + */ +extern int fas216_add (struct Scsi_Host *instance, struct device *dev); + +/* Function: int fas216_queue_command (Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *)) + * Purpose : queue a command for adapter to process. + * Params : SCpnt - Command to queue + * done - done function to call once command is complete + * Returns : 0 - success, else error + */ +extern int fas216_queue_command (Scsi_Cmnd *, void (*done)(Scsi_Cmnd *)); + +/* Function: int fas216_noqueue_command (Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *)) + * Purpose : queue a command for adapter to process, and process it to completion. + * Params : SCpnt - Command to queue + * done - done function to call once command is complete + * Returns : 0 - success, else error + */ +extern int fas216_noqueue_command (Scsi_Cmnd *, void (*done)(Scsi_Cmnd *)); + +/* Function: irqreturn_t fas216_intr (FAS216_Info *info) + * Purpose : handle interrupts from the interface to progress a command + * Params : info - interface to service + */ +extern irqreturn_t fas216_intr (FAS216_Info *info); + +extern void fas216_remove (struct Scsi_Host *instance); + +/* Function: void fas216_release (struct Scsi_Host *instance) + * Purpose : release all resources and put everything to bed for FAS/NCR/AMD SCSI ic. + * Params : instance - a driver-specific filled-out structure + * Returns : 0 on success + */ +extern void fas216_release (struct Scsi_Host *instance); + +extern int fas216_print_host(FAS216_Info *info, char *buffer); +extern int fas216_print_stats(FAS216_Info *info, char *buffer); +extern int fas216_print_devices(FAS216_Info *info, char *buffer); + +/* Function: int fas216_eh_abort(Scsi_Cmnd *SCpnt) + * Purpose : abort this command + * Params : SCpnt - command to abort + * Returns : FAILED if unable to abort + */ +extern int fas216_eh_abort(Scsi_Cmnd *SCpnt); + +/* Function: int fas216_eh_device_reset(Scsi_Cmnd *SCpnt) + * Purpose : Reset the device associated with this command + * Params : SCpnt - command specifing device to reset + * Returns : FAILED if unable to reset + */ +extern int fas216_eh_device_reset(Scsi_Cmnd *SCpnt); + +/* Function: int fas216_eh_bus_reset(Scsi_Cmnd *SCpnt) + * Purpose : Reset the complete bus associated with this command + * Params : SCpnt - command specifing bus to reset + * Returns : FAILED if unable to reset + */ +extern int fas216_eh_bus_reset(Scsi_Cmnd *SCpnt); + +/* Function: int fas216_eh_host_reset(Scsi_Cmnd *SCpnt) + * Purpose : Reset the host associated with this command + * Params : SCpnt - command specifing host to reset + * Returns : FAILED if unable to reset + */ +extern int fas216_eh_host_reset(Scsi_Cmnd *SCpnt); + +#endif /* FAS216_H */ diff --git a/drivers/scsi/arm/msgqueue.c b/drivers/scsi/arm/msgqueue.c new file mode 100644 index 00000000000..7c95c7582b2 --- /dev/null +++ b/drivers/scsi/arm/msgqueue.c @@ -0,0 +1,171 @@ +/* + * linux/drivers/acorn/scsi/msgqueue.c + * + * Copyright (C) 1997-1998 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * message queue handling + */ +#include +#include +#include +#include + +#include "msgqueue.h" + +/* + * Function: struct msgqueue_entry *mqe_alloc(MsgQueue_t *msgq) + * Purpose : Allocate a message queue entry + * Params : msgq - message queue to claim entry for + * Returns : message queue entry or NULL. + */ +static struct msgqueue_entry *mqe_alloc(MsgQueue_t *msgq) +{ + struct msgqueue_entry *mq; + + if ((mq = msgq->free) != NULL) + msgq->free = mq->next; + + return mq; +} + +/* + * Function: void mqe_free(MsgQueue_t *msgq, struct msgqueue_entry *mq) + * Purpose : free a message queue entry + * Params : msgq - message queue to free entry from + * mq - message queue entry to free + */ +static void mqe_free(MsgQueue_t *msgq, struct msgqueue_entry *mq) +{ + if (mq) { + mq->next = msgq->free; + msgq->free = mq; + } +} + +/* + * Function: void msgqueue_initialise(MsgQueue_t *msgq) + * Purpose : initialise a message queue + * Params : msgq - queue to initialise + */ +void msgqueue_initialise(MsgQueue_t *msgq) +{ + int i; + + msgq->qe = NULL; + msgq->free = &msgq->entries[0]; + + for (i = 0; i < NR_MESSAGES; i++) + msgq->entries[i].next = &msgq->entries[i + 1]; + + msgq->entries[NR_MESSAGES - 1].next = NULL; +} + + +/* + * Function: void msgqueue_free(MsgQueue_t *msgq) + * Purpose : free a queue + * Params : msgq - queue to free + */ +void msgqueue_free(MsgQueue_t *msgq) +{ +} + +/* + * Function: int msgqueue_msglength(MsgQueue_t *msgq) + * Purpose : calculate the total length of all messages on the message queue + * Params : msgq - queue to examine + * Returns : number of bytes of messages in queue + */ +int msgqueue_msglength(MsgQueue_t *msgq) +{ + struct msgqueue_entry *mq = msgq->qe; + int length = 0; + + for (mq = msgq->qe; mq; mq = mq->next) + length += mq->msg.length; + + return length; +} + +/* + * Function: struct message *msgqueue_getmsg(MsgQueue_t *msgq, int msgno) + * Purpose : return a message + * Params : msgq - queue to obtain message from + * : msgno - message number + * Returns : pointer to message string, or NULL + */ +struct message *msgqueue_getmsg(MsgQueue_t *msgq, int msgno) +{ + struct msgqueue_entry *mq; + + for (mq = msgq->qe; mq && msgno; mq = mq->next, msgno--); + + return mq ? &mq->msg : NULL; +} + +/* + * Function: int msgqueue_addmsg(MsgQueue_t *msgq, int length, ...) + * Purpose : add a message onto a message queue + * Params : msgq - queue to add message on + * length - length of message + * ... - message bytes + * Returns : != 0 if successful + */ +int msgqueue_addmsg(MsgQueue_t *msgq, int length, ...) +{ + struct msgqueue_entry *mq = mqe_alloc(msgq); + va_list ap; + + if (mq) { + struct msgqueue_entry **mqp; + int i; + + va_start(ap, length); + for (i = 0; i < length; i++) + mq->msg.msg[i] = va_arg(ap, unsigned int); + va_end(ap); + + mq->msg.length = length; + mq->msg.fifo = 0; + mq->next = NULL; + + mqp = &msgq->qe; + while (*mqp) + mqp = &(*mqp)->next; + + *mqp = mq; + } + + return mq != NULL; +} + +/* + * Function: void msgqueue_flush(MsgQueue_t *msgq) + * Purpose : flush all messages from message queue + * Params : msgq - queue to flush + */ +void msgqueue_flush(MsgQueue_t *msgq) +{ + struct msgqueue_entry *mq, *mqnext; + + for (mq = msgq->qe; mq; mq = mqnext) { + mqnext = mq->next; + mqe_free(msgq, mq); + } + msgq->qe = NULL; +} + +EXPORT_SYMBOL(msgqueue_initialise); +EXPORT_SYMBOL(msgqueue_free); +EXPORT_SYMBOL(msgqueue_msglength); +EXPORT_SYMBOL(msgqueue_getmsg); +EXPORT_SYMBOL(msgqueue_addmsg); +EXPORT_SYMBOL(msgqueue_flush); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("SCSI message queue handling"); +MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/arm/msgqueue.h b/drivers/scsi/arm/msgqueue.h new file mode 100644 index 00000000000..41c7333df3e --- /dev/null +++ b/drivers/scsi/arm/msgqueue.h @@ -0,0 +1,82 @@ +/* + * linux/drivers/acorn/scsi/msgqueue.h + * + * Copyright (C) 1997 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * message queue handling + */ +#ifndef MSGQUEUE_H +#define MSGQUEUE_H + +struct message { + char msg[8]; + int length; + int fifo; +}; + +struct msgqueue_entry { + struct message msg; + struct msgqueue_entry *next; +}; + +#define NR_MESSAGES 4 + +typedef struct { + struct msgqueue_entry *qe; + struct msgqueue_entry *free; + struct msgqueue_entry entries[NR_MESSAGES]; +} MsgQueue_t; + +/* + * Function: void msgqueue_initialise(MsgQueue_t *msgq) + * Purpose : initialise a message queue + * Params : msgq - queue to initialise + */ +extern void msgqueue_initialise(MsgQueue_t *msgq); + +/* + * Function: void msgqueue_free(MsgQueue_t *msgq) + * Purpose : free a queue + * Params : msgq - queue to free + */ +extern void msgqueue_free(MsgQueue_t *msgq); + +/* + * Function: int msgqueue_msglength(MsgQueue_t *msgq) + * Purpose : calculate the total length of all messages on the message queue + * Params : msgq - queue to examine + * Returns : number of bytes of messages in queue + */ +extern int msgqueue_msglength(MsgQueue_t *msgq); + +/* + * Function: struct message *msgqueue_getmsg(MsgQueue_t *msgq, int msgno) + * Purpose : return a message & its length + * Params : msgq - queue to obtain message from + * : msgno - message number + * Returns : pointer to message string, or NULL + */ +extern struct message *msgqueue_getmsg(MsgQueue_t *msgq, int msgno); + +/* + * Function: int msgqueue_addmsg(MsgQueue_t *msgq, int length, ...) + * Purpose : add a message onto a message queue + * Params : msgq - queue to add message on + * length - length of message + * ... - message bytes + * Returns : != 0 if successful + */ +extern int msgqueue_addmsg(MsgQueue_t *msgq, int length, ...); + +/* + * Function: void msgqueue_flush(MsgQueue_t *msgq) + * Purpose : flush all messages from message queue + * Params : msgq - queue to flush + */ +extern void msgqueue_flush(MsgQueue_t *msgq); + +#endif diff --git a/drivers/scsi/arm/oak.c b/drivers/scsi/arm/oak.c new file mode 100644 index 00000000000..ff2554f4cb8 --- /dev/null +++ b/drivers/scsi/arm/oak.c @@ -0,0 +1,217 @@ +/* + * Oak Generic NCR5380 driver + * + * Copyright 1995-2002, Russell King + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "../scsi.h" +#include + +#define AUTOSENSE +/*#define PSEUDO_DMA*/ + +#define OAKSCSI_PUBLIC_RELEASE 1 + +#define NCR5380_read(reg) oakscsi_read(_instance, reg) +#define NCR5380_write(reg, value) oakscsi_write(_instance, reg, value) +#define NCR5380_intr oakscsi_intr +#define NCR5380_queue_command oakscsi_queue_command +#define NCR5380_proc_info oakscsi_proc_info + +#define NCR5380_implementation_fields int port, ctrl +#define NCR5380_local_declare() struct Scsi_Host *_instance +#define NCR5380_setup(instance) _instance = instance + +#define BOARD_NORMAL 0 +#define BOARD_NCR53C400 1 + +#include "../NCR5380.h" + +#undef START_DMA_INITIATOR_RECEIVE_REG +#define START_DMA_INITIATOR_RECEIVE_REG (7 + 128) + +const char * oakscsi_info (struct Scsi_Host *spnt) +{ + return ""; +} + +#define STAT(p) inw(p + 144) +extern void inswb(int from, void *to, int len); + +static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *addr, + int len) +{ + int iobase = instance->io_port; +printk("writing %p len %d\n",addr, len); + if(!len) return -1; + + while(1) + { + int status; + while(((status = STAT(iobase)) & 0x100)==0); + } +} + +static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *addr, + int len) +{ + int iobase = instance->io_port; +printk("reading %p len %d\n", addr, len); + while(len > 0) + { + int status, timeout; + unsigned long b; + + timeout = 0x01FFFFFF; + + while(((status = STAT(iobase)) & 0x100)==0) + { + timeout--; + if(status & 0x200 || !timeout) + { + printk("status = %08X\n",status); + return 1; + } + } + if(len >= 128) + { + inswb(iobase + 136, addr, 128); + addr += 128; + len -= 128; + } + else + { + b = (unsigned long) inw(iobase + 136); + *addr ++ = b; + len -= 1; + if(len) + *addr ++ = b>>8; + len -= 1; + } + } + return 0; +} + +#define oakscsi_read(instance,reg) (inb((instance)->io_port + (reg))) +#define oakscsi_write(instance,reg,val) (outb((val), (instance)->io_port + (reg))) + +#undef STAT + +#include "../NCR5380.c" + +static Scsi_Host_Template oakscsi_template = { + .module = THIS_MODULE, + .proc_info = oakscsi_proc_info, + .name = "Oak 16-bit SCSI", + .info = oakscsi_info, + .queuecommand = oakscsi_queue_command, + .eh_abort_handler = NCR5380_abort, + .eh_device_reset_handler= NCR5380_device_reset, + .eh_bus_reset_handler = NCR5380_bus_reset, + .eh_host_reset_handler = NCR5380_host_reset, + .can_queue = 16, + .this_id = 7, + .sg_tablesize = SG_ALL, + .cmd_per_lun = 2, + .use_clustering = DISABLE_CLUSTERING, + .proc_name = "oakscsi", +}; + +static int __devinit +oakscsi_probe(struct expansion_card *ec, const struct ecard_id *id) +{ + struct Scsi_Host *host; + int ret = -ENOMEM; + + host = scsi_host_alloc(&oakscsi_template, sizeof(struct NCR5380_hostdata)); + if (!host) + goto out; + + host->io_port = ecard_address(ec, ECARD_MEMC, 0); + host->irq = IRQ_NONE; + host->n_io_port = 255; + + ret = -EBUSY; + if (!request_region (host->io_port, host->n_io_port, "Oak SCSI")) + goto unreg; + + NCR5380_init(host, 0); + + printk("scsi%d: at port 0x%08lx irqs disabled", + host->host_no, host->io_port); + printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d", + host->can_queue, host->cmd_per_lun, OAKSCSI_PUBLIC_RELEASE); + printk("\nscsi%d:", host->host_no); + NCR5380_print_options(host); + printk("\n"); + + ret = scsi_add_host(host, &ec->dev); + if (ret) + goto out_release; + + scsi_scan_host(host); + goto out; + + out_release: + release_region(host->io_port, host->n_io_port); + unreg: + scsi_host_put(host); + out: + return ret; +} + +static void __devexit oakscsi_remove(struct expansion_card *ec) +{ + struct Scsi_Host *host = ecard_get_drvdata(ec); + + ecard_set_drvdata(ec, NULL); + scsi_remove_host(host); + + NCR5380_exit(host); + release_region(host->io_port, host->n_io_port); + scsi_host_put(host); +} + +static const struct ecard_id oakscsi_cids[] = { + { MANU_OAK, PROD_OAK_SCSI }, + { 0xffff, 0xffff } +}; + +static struct ecard_driver oakscsi_driver = { + .probe = oakscsi_probe, + .remove = __devexit_p(oakscsi_remove), + .id_table = oakscsi_cids, + .drv = { + .name = "oakscsi", + }, +}; + +static int __init oakscsi_init(void) +{ + return ecard_register_driver(&oakscsi_driver); +} + +static void __exit oakscsi_exit(void) +{ + ecard_remove_driver(&oakscsi_driver); +} + +module_init(oakscsi_init); +module_exit(oakscsi_exit); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("Oak SCSI driver"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/scsi/arm/powertec.c b/drivers/scsi/arm/powertec.c new file mode 100644 index 00000000000..54f23be6460 --- /dev/null +++ b/drivers/scsi/arm/powertec.c @@ -0,0 +1,472 @@ +/* + * linux/drivers/acorn/scsi/powertec.c + * + * Copyright (C) 1997-2005 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "../scsi.h" +#include +#include "fas216.h" +#include "scsi.h" + +#include + +#define POWERTEC_FAS216_OFFSET 0x3000 +#define POWERTEC_FAS216_SHIFT 6 + +#define POWERTEC_INTR_STATUS 0x2000 +#define POWERTEC_INTR_BIT 0x80 + +#define POWERTEC_RESET_CONTROL 0x1018 +#define POWERTEC_RESET_BIT 1 + +#define POWERTEC_TERM_CONTROL 0x2018 +#define POWERTEC_TERM_ENABLE 1 + +#define POWERTEC_INTR_CONTROL 0x101c +#define POWERTEC_INTR_ENABLE 1 +#define POWERTEC_INTR_DISABLE 0 + +#define VERSION "1.10 (19/01/2003 2.5.59)" + +/* + * Use term=0,1,0,0,0 to turn terminators on/off. + * One entry per slot. + */ +static int term[MAX_ECARDS] = { 1, 1, 1, 1, 1, 1, 1, 1 }; + +#define NR_SG 256 + +struct powertec_info { + FAS216_Info info; + struct expansion_card *ec; + void __iomem *base; + unsigned int term_ctl; + struct scatterlist sg[NR_SG]; +}; + +/* Prototype: void powertecscsi_irqenable(ec, irqnr) + * Purpose : Enable interrupts on Powertec SCSI card + * Params : ec - expansion card structure + * : irqnr - interrupt number + */ +static void +powertecscsi_irqenable(struct expansion_card *ec, int irqnr) +{ + struct powertec_info *info = ec->irq_data; + writeb(POWERTEC_INTR_ENABLE, info->base + POWERTEC_INTR_CONTROL); +} + +/* Prototype: void powertecscsi_irqdisable(ec, irqnr) + * Purpose : Disable interrupts on Powertec SCSI card + * Params : ec - expansion card structure + * : irqnr - interrupt number + */ +static void +powertecscsi_irqdisable(struct expansion_card *ec, int irqnr) +{ + struct powertec_info *info = ec->irq_data; + writeb(POWERTEC_INTR_DISABLE, info->base + POWERTEC_INTR_CONTROL); +} + +static const expansioncard_ops_t powertecscsi_ops = { + .irqenable = powertecscsi_irqenable, + .irqdisable = powertecscsi_irqdisable, +}; + +/* Prototype: void powertecscsi_terminator_ctl(host, on_off) + * Purpose : Turn the Powertec SCSI terminators on or off + * Params : host - card to turn on/off + * : on_off - !0 to turn on, 0 to turn off + */ +static void +powertecscsi_terminator_ctl(struct Scsi_Host *host, int on_off) +{ + struct powertec_info *info = (struct powertec_info *)host->hostdata; + + info->term_ctl = on_off ? POWERTEC_TERM_ENABLE : 0; + writeb(info->term_ctl, info->base + POWERTEC_TERM_CONTROL); +} + +/* Prototype: void powertecscsi_intr(irq, *dev_id, *regs) + * Purpose : handle interrupts from Powertec SCSI card + * Params : irq - interrupt number + * dev_id - user-defined (Scsi_Host structure) + * regs - processor registers at interrupt + */ +static irqreturn_t +powertecscsi_intr(int irq, void *dev_id, struct pt_regs *regs) +{ + struct powertec_info *info = dev_id; + + return fas216_intr(&info->info); +} + +/* Prototype: fasdmatype_t powertecscsi_dma_setup(host, SCpnt, direction, min_type) + * Purpose : initialises DMA/PIO + * Params : host - host + * SCpnt - command + * direction - DMA on to/off of card + * min_type - minimum DMA support that we must have for this transfer + * Returns : type of transfer to be performed + */ +static fasdmatype_t +powertecscsi_dma_setup(struct Scsi_Host *host, Scsi_Pointer *SCp, + fasdmadir_t direction, fasdmatype_t min_type) +{ + struct powertec_info *info = (struct powertec_info *)host->hostdata; + struct device *dev = scsi_get_device(host); + int dmach = info->info.scsi.dma; + + if (info->info.ifcfg.capabilities & FASCAP_DMA && + min_type == fasdma_real_all) { + int bufs, map_dir, dma_dir; + + bufs = copy_SCp_to_sg(&info->sg[0], SCp, NR_SG); + + if (direction == DMA_OUT) + map_dir = DMA_TO_DEVICE, + dma_dir = DMA_MODE_WRITE; + else + map_dir = DMA_FROM_DEVICE, + dma_dir = DMA_MODE_READ; + + dma_map_sg(dev, info->sg, bufs + 1, map_dir); + + disable_dma(dmach); + set_dma_sg(dmach, info->sg, bufs + 1); + set_dma_mode(dmach, dma_dir); + enable_dma(dmach); + return fasdma_real_all; + } + + /* + * If we're not doing DMA, + * we'll do slow PIO + */ + return fasdma_pio; +} + +/* Prototype: int powertecscsi_dma_stop(host, SCpnt) + * Purpose : stops DMA/PIO + * Params : host - host + * SCpnt - command + */ +static void +powertecscsi_dma_stop(struct Scsi_Host *host, Scsi_Pointer *SCp) +{ + struct powertec_info *info = (struct powertec_info *)host->hostdata; + if (info->info.scsi.dma != NO_DMA) + disable_dma(info->info.scsi.dma); +} + +/* Prototype: const char *powertecscsi_info(struct Scsi_Host * host) + * Purpose : returns a descriptive string about this interface, + * Params : host - driver host structure to return info for. + * Returns : pointer to a static buffer containing null terminated string. + */ +const char *powertecscsi_info(struct Scsi_Host *host) +{ + struct powertec_info *info = (struct powertec_info *)host->hostdata; + static char string[150]; + + sprintf(string, "%s (%s) in slot %d v%s terminators o%s", + host->hostt->name, info->info.scsi.type, info->ec->slot_no, + VERSION, info->term_ctl ? "n" : "ff"); + + return string; +} + +/* Prototype: int powertecscsi_set_proc_info(struct Scsi_Host *host, char *buffer, int length) + * Purpose : Set a driver specific function + * Params : host - host to setup + * : buffer - buffer containing string describing operation + * : length - length of string + * Returns : -EINVAL, or 0 + */ +static int +powertecscsi_set_proc_info(struct Scsi_Host *host, char *buffer, int length) +{ + int ret = length; + + if (length >= 12 && strncmp(buffer, "POWERTECSCSI", 12) == 0) { + buffer += 12; + length -= 12; + + if (length >= 5 && strncmp(buffer, "term=", 5) == 0) { + if (buffer[5] == '1') + powertecscsi_terminator_ctl(host, 1); + else if (buffer[5] == '0') + powertecscsi_terminator_ctl(host, 0); + else + ret = -EINVAL; + } else + ret = -EINVAL; + } else + ret = -EINVAL; + + return ret; +} + +/* Prototype: int powertecscsi_proc_info(char *buffer, char **start, off_t offset, + * int length, int host_no, int inout) + * Purpose : Return information about the driver to a user process accessing + * the /proc filesystem. + * Params : buffer - a buffer to write information to + * start - a pointer into this buffer set by this routine to the start + * of the required information. + * offset - offset into information that we have read upto. + * length - length of buffer + * inout - 0 for reading, 1 for writing. + * Returns : length of data written to buffer. + */ +int powertecscsi_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset, + int length, int inout) +{ + struct powertec_info *info; + char *p = buffer; + int pos; + + if (inout == 1) + return powertecscsi_set_proc_info(host, buffer, length); + + info = (struct powertec_info *)host->hostdata; + + p += sprintf(p, "PowerTec SCSI driver v%s\n", VERSION); + p += fas216_print_host(&info->info, p); + p += sprintf(p, "Term : o%s\n", + info->term_ctl ? "n" : "ff"); + + p += fas216_print_stats(&info->info, p); + p += fas216_print_devices(&info->info, p); + + *start = buffer + offset; + pos = p - buffer - offset; + if (pos > length) + pos = length; + + return pos; +} + +static ssize_t powertecscsi_show_term(struct device *dev, char *buf) +{ + struct expansion_card *ec = ECARD_DEV(dev); + struct Scsi_Host *host = ecard_get_drvdata(ec); + struct powertec_info *info = (struct powertec_info *)host->hostdata; + + return sprintf(buf, "%d\n", info->term_ctl ? 1 : 0); +} + +static ssize_t +powertecscsi_store_term(struct device *dev, const char *buf, size_t len) +{ + struct expansion_card *ec = ECARD_DEV(dev); + struct Scsi_Host *host = ecard_get_drvdata(ec); + + if (len > 1) + powertecscsi_terminator_ctl(host, buf[0] != '0'); + + return len; +} + +static DEVICE_ATTR(bus_term, S_IRUGO | S_IWUSR, + powertecscsi_show_term, powertecscsi_store_term); + +static Scsi_Host_Template powertecscsi_template = { + .module = THIS_MODULE, + .proc_info = powertecscsi_proc_info, + .name = "PowerTec SCSI", + .info = powertecscsi_info, + .queuecommand = fas216_queue_command, + .eh_host_reset_handler = fas216_eh_host_reset, + .eh_bus_reset_handler = fas216_eh_bus_reset, + .eh_device_reset_handler = fas216_eh_device_reset, + .eh_abort_handler = fas216_eh_abort, + + .can_queue = 8, + .this_id = 7, + .sg_tablesize = SG_ALL, + .cmd_per_lun = 2, + .use_clustering = ENABLE_CLUSTERING, + .proc_name = "powertec", +}; + +static int __devinit +powertecscsi_probe(struct expansion_card *ec, const struct ecard_id *id) +{ + struct Scsi_Host *host; + struct powertec_info *info; + unsigned long resbase, reslen; + void __iomem *base; + int ret; + + ret = ecard_request_resources(ec); + if (ret) + goto out; + + resbase = ecard_resource_start(ec, ECARD_RES_IOCFAST); + reslen = ecard_resource_len(ec, ECARD_RES_IOCFAST); + base = ioremap(resbase, reslen); + if (!base) { + ret = -ENOMEM; + goto out_region; + } + + host = scsi_host_alloc(&powertecscsi_template, + sizeof (struct powertec_info)); + if (!host) { + ret = -ENOMEM; + goto out_unmap; + } + + ecard_set_drvdata(ec, host); + + info = (struct powertec_info *)host->hostdata; + info->base = base; + powertecscsi_terminator_ctl(host, term[ec->slot_no]); + + info->info.scsi.io_base = base + POWERTEC_FAS216_OFFSET; + info->info.scsi.io_shift = POWERTEC_FAS216_SHIFT; + info->info.scsi.irq = ec->irq; + info->info.scsi.dma = ec->dma; + info->info.ifcfg.clockrate = 40; /* MHz */ + info->info.ifcfg.select_timeout = 255; + info->info.ifcfg.asyncperiod = 200; /* ns */ + info->info.ifcfg.sync_max_depth = 7; + info->info.ifcfg.cntl3 = CNTL3_BS8 | CNTL3_FASTSCSI | CNTL3_FASTCLK; + info->info.ifcfg.disconnect_ok = 1; + info->info.ifcfg.wide_max_size = 0; + info->info.ifcfg.capabilities = 0; + info->info.dma.setup = powertecscsi_dma_setup; + info->info.dma.pseudo = NULL; + info->info.dma.stop = powertecscsi_dma_stop; + + ec->irqaddr = base + POWERTEC_INTR_STATUS; + ec->irqmask = POWERTEC_INTR_BIT; + ec->irq_data = info; + ec->ops = &powertecscsi_ops; + + device_create_file(&ec->dev, &dev_attr_bus_term); + + ret = fas216_init(host); + if (ret) + goto out_free; + + ret = request_irq(ec->irq, powertecscsi_intr, + SA_INTERRUPT, "powertec", info); + if (ret) { + printk("scsi%d: IRQ%d not free: %d\n", + host->host_no, ec->irq, ret); + goto out_release; + } + + if (info->info.scsi.dma != NO_DMA) { + if (request_dma(info->info.scsi.dma, "powertec")) { + printk("scsi%d: DMA%d not free, using PIO\n", + host->host_no, info->info.scsi.dma); + info->info.scsi.dma = NO_DMA; + } else { + set_dma_speed(info->info.scsi.dma, 180); + info->info.ifcfg.capabilities |= FASCAP_DMA; + } + } + + ret = fas216_add(host, &ec->dev); + if (ret == 0) + goto out; + + if (info->info.scsi.dma != NO_DMA) + free_dma(info->info.scsi.dma); + free_irq(ec->irq, host); + + out_release: + fas216_release(host); + + out_free: + device_remove_file(&ec->dev, &dev_attr_bus_term); + scsi_host_put(host); + + out_unmap: + iounmap(base); + + out_region: + ecard_release_resources(ec); + + out: + return ret; +} + +static void __devexit powertecscsi_remove(struct expansion_card *ec) +{ + struct Scsi_Host *host = ecard_get_drvdata(ec); + struct powertec_info *info = (struct powertec_info *)host->hostdata; + + ecard_set_drvdata(ec, NULL); + fas216_remove(host); + + device_remove_file(&ec->dev, &dev_attr_bus_term); + + if (info->info.scsi.dma != NO_DMA) + free_dma(info->info.scsi.dma); + free_irq(ec->irq, info); + + iounmap(info->base); + + fas216_release(host); + scsi_host_put(host); + ecard_release_resources(ec); +} + +static const struct ecard_id powertecscsi_cids[] = { + { MANU_ALSYSTEMS, PROD_ALSYS_SCSIATAPI }, + { 0xffff, 0xffff }, +}; + +static struct ecard_driver powertecscsi_driver = { + .probe = powertecscsi_probe, + .remove = __devexit_p(powertecscsi_remove), + .id_table = powertecscsi_cids, + .drv = { + .name = "powertecscsi", + }, +}; + +static int __init powertecscsi_init(void) +{ + return ecard_register_driver(&powertecscsi_driver); +} + +static void __exit powertecscsi_exit(void) +{ + ecard_remove_driver(&powertecscsi_driver); +} + +module_init(powertecscsi_init); +module_exit(powertecscsi_exit); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("Powertec SCSI driver"); +MODULE_PARM(term, "1-8i"); +MODULE_PARM_DESC(term, "SCSI bus termination"); +MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/arm/queue.c b/drivers/scsi/arm/queue.c new file mode 100644 index 00000000000..e6d159270d2 --- /dev/null +++ b/drivers/scsi/arm/queue.c @@ -0,0 +1,319 @@ +/* + * linux/drivers/acorn/scsi/queue.c: queue handling primitives + * + * Copyright (C) 1997-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: + * 15-Sep-1997 RMK Created. + * 11-Oct-1997 RMK Corrected problem with queue_remove_exclude + * not updating internal linked list properly + * (was causing commands to go missing). + * 30-Aug-2000 RMK Use Linux list handling and spinlocks + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../scsi.h" + +#define DEBUG + +typedef struct queue_entry { + struct list_head list; + Scsi_Cmnd *SCpnt; +#ifdef DEBUG + unsigned long magic; +#endif +} QE_t; + +#ifdef DEBUG +#define QUEUE_MAGIC_FREE 0xf7e1c9a3 +#define QUEUE_MAGIC_USED 0xf7e1cc33 + +#define SET_MAGIC(q,m) ((q)->magic = (m)) +#define BAD_MAGIC(q,m) ((q)->magic != (m)) +#else +#define SET_MAGIC(q,m) do { } while (0) +#define BAD_MAGIC(q,m) (0) +#endif + +#include "queue.h" + +#define NR_QE 32 + +/* + * Function: void queue_initialise (Queue_t *queue) + * Purpose : initialise a queue + * Params : queue - queue to initialise + */ +int queue_initialise (Queue_t *queue) +{ + unsigned int nqueues = NR_QE; + QE_t *q; + + spin_lock_init(&queue->queue_lock); + INIT_LIST_HEAD(&queue->head); + INIT_LIST_HEAD(&queue->free); + + /* + * If life was easier, then SCpnt would have a + * host-available list head, and we wouldn't + * need to keep free lists or allocate this + * memory. + */ + queue->alloc = q = kmalloc(sizeof(QE_t) * nqueues, GFP_KERNEL); + if (q) { + for (; nqueues; q++, nqueues--) { + SET_MAGIC(q, QUEUE_MAGIC_FREE); + q->SCpnt = NULL; + list_add(&q->list, &queue->free); + } + } + + return queue->alloc != NULL; +} + +/* + * Function: void queue_free (Queue_t *queue) + * Purpose : free a queue + * Params : queue - queue to free + */ +void queue_free (Queue_t *queue) +{ + if (!list_empty(&queue->head)) + printk(KERN_WARNING "freeing non-empty queue %p\n", queue); + if (queue->alloc) + kfree(queue->alloc); +} + + +/* + * Function: int queue_add_cmd(Queue_t *queue, Scsi_Cmnd *SCpnt, int head) + * Purpose : Add a new command onto a queue, adding REQUEST_SENSE to head. + * Params : queue - destination queue + * SCpnt - command to add + * head - add command to head of queue + * Returns : 0 on error, !0 on success + */ +int __queue_add(Queue_t *queue, Scsi_Cmnd *SCpnt, int head) +{ + unsigned long flags; + struct list_head *l; + QE_t *q; + int ret = 0; + + spin_lock_irqsave(&queue->queue_lock, flags); + if (list_empty(&queue->free)) + goto empty; + + l = queue->free.next; + list_del(l); + + q = list_entry(l, QE_t, list); + if (BAD_MAGIC(q, QUEUE_MAGIC_FREE)) + BUG(); + + SET_MAGIC(q, QUEUE_MAGIC_USED); + q->SCpnt = SCpnt; + + if (head) + list_add(l, &queue->head); + else + list_add_tail(l, &queue->head); + + ret = 1; +empty: + spin_unlock_irqrestore(&queue->queue_lock, flags); + return ret; +} + +static Scsi_Cmnd *__queue_remove(Queue_t *queue, struct list_head *ent) +{ + QE_t *q; + + /* + * Move the entry from the "used" list onto the "free" list + */ + list_del(ent); + q = list_entry(ent, QE_t, list); + if (BAD_MAGIC(q, QUEUE_MAGIC_USED)) + BUG(); + + SET_MAGIC(q, QUEUE_MAGIC_FREE); + list_add(ent, &queue->free); + + return q->SCpnt; +} + +/* + * Function: Scsi_Cmnd *queue_remove_exclude (queue, exclude) + * Purpose : remove a SCSI command from a queue + * Params : queue - queue to remove command from + * exclude - bit array of target&lun which is busy + * Returns : Scsi_Cmnd if successful (and a reference), or NULL if no command available + */ +Scsi_Cmnd *queue_remove_exclude(Queue_t *queue, unsigned long *exclude) +{ + unsigned long flags; + struct list_head *l; + Scsi_Cmnd *SCpnt = NULL; + + spin_lock_irqsave(&queue->queue_lock, flags); + list_for_each(l, &queue->head) { + QE_t *q = list_entry(l, QE_t, list); + if (!test_bit(q->SCpnt->device->id * 8 + q->SCpnt->device->lun, exclude)) { + SCpnt = __queue_remove(queue, l); + break; + } + } + spin_unlock_irqrestore(&queue->queue_lock, flags); + + return SCpnt; +} + +/* + * Function: Scsi_Cmnd *queue_remove (queue) + * Purpose : removes first SCSI command from a queue + * Params : queue - queue to remove command from + * Returns : Scsi_Cmnd if successful (and a reference), or NULL if no command available + */ +Scsi_Cmnd *queue_remove(Queue_t *queue) +{ + unsigned long flags; + Scsi_Cmnd *SCpnt = NULL; + + spin_lock_irqsave(&queue->queue_lock, flags); + if (!list_empty(&queue->head)) + SCpnt = __queue_remove(queue, queue->head.next); + spin_unlock_irqrestore(&queue->queue_lock, flags); + + return SCpnt; +} + +/* + * Function: Scsi_Cmnd *queue_remove_tgtluntag (queue, target, lun, tag) + * Purpose : remove a SCSI command from the queue for a specified target/lun/tag + * Params : queue - queue to remove command from + * target - target that we want + * lun - lun on device + * tag - tag on device + * Returns : Scsi_Cmnd if successful, or NULL if no command satisfies requirements + */ +Scsi_Cmnd *queue_remove_tgtluntag (Queue_t *queue, int target, int lun, int tag) +{ + unsigned long flags; + struct list_head *l; + Scsi_Cmnd *SCpnt = NULL; + + spin_lock_irqsave(&queue->queue_lock, flags); + list_for_each(l, &queue->head) { + QE_t *q = list_entry(l, QE_t, list); + if (q->SCpnt->device->id == target && q->SCpnt->device->lun == lun && + q->SCpnt->tag == tag) { + SCpnt = __queue_remove(queue, l); + break; + } + } + spin_unlock_irqrestore(&queue->queue_lock, flags); + + return SCpnt; +} + +/* + * Function: queue_remove_all_target(queue, target) + * Purpose : remove all SCSI commands from the queue for a specified target + * Params : queue - queue to remove command from + * target - target device id + * Returns : nothing + */ +void queue_remove_all_target(Queue_t *queue, int target) +{ + unsigned long flags; + struct list_head *l; + + spin_lock_irqsave(&queue->queue_lock, flags); + list_for_each(l, &queue->head) { + QE_t *q = list_entry(l, QE_t, list); + if (q->SCpnt->device->id == target) + __queue_remove(queue, l); + } + spin_unlock_irqrestore(&queue->queue_lock, flags); +} + +/* + * Function: int queue_probetgtlun (queue, target, lun) + * Purpose : check to see if we have a command in the queue for the specified + * target/lun. + * Params : queue - queue to look in + * target - target we want to probe + * lun - lun on target + * Returns : 0 if not found, != 0 if found + */ +int queue_probetgtlun (Queue_t *queue, int target, int lun) +{ + unsigned long flags; + struct list_head *l; + int found = 0; + + spin_lock_irqsave(&queue->queue_lock, flags); + list_for_each(l, &queue->head) { + QE_t *q = list_entry(l, QE_t, list); + if (q->SCpnt->device->id == target && q->SCpnt->device->lun == lun) { + found = 1; + break; + } + } + spin_unlock_irqrestore(&queue->queue_lock, flags); + + return found; +} + +/* + * Function: int queue_remove_cmd(Queue_t *queue, Scsi_Cmnd *SCpnt) + * Purpose : remove a specific command from the queues + * Params : queue - queue to look in + * SCpnt - command to find + * Returns : 0 if not found + */ +int queue_remove_cmd(Queue_t *queue, Scsi_Cmnd *SCpnt) +{ + unsigned long flags; + struct list_head *l; + int found = 0; + + spin_lock_irqsave(&queue->queue_lock, flags); + list_for_each(l, &queue->head) { + QE_t *q = list_entry(l, QE_t, list); + if (q->SCpnt == SCpnt) { + __queue_remove(queue, l); + found = 1; + break; + } + } + spin_unlock_irqrestore(&queue->queue_lock, flags); + + return found; +} + +EXPORT_SYMBOL(queue_initialise); +EXPORT_SYMBOL(queue_free); +EXPORT_SYMBOL(__queue_add); +EXPORT_SYMBOL(queue_remove); +EXPORT_SYMBOL(queue_remove_exclude); +EXPORT_SYMBOL(queue_remove_tgtluntag); +EXPORT_SYMBOL(queue_remove_cmd); +EXPORT_SYMBOL(queue_remove_all_target); +EXPORT_SYMBOL(queue_probetgtlun); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("SCSI command queueing"); +MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/arm/queue.h b/drivers/scsi/arm/queue.h new file mode 100644 index 00000000000..0c9dec4c171 --- /dev/null +++ b/drivers/scsi/arm/queue.h @@ -0,0 +1,105 @@ +/* + * linux/drivers/acorn/scsi/queue.h: queue handling + * + * Copyright (C) 1997 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef QUEUE_H +#define QUEUE_H + +typedef struct { + struct list_head head; + struct list_head free; + spinlock_t queue_lock; + void *alloc; /* start of allocated mem */ +} Queue_t; + +/* + * Function: void queue_initialise (Queue_t *queue) + * Purpose : initialise a queue + * Params : queue - queue to initialise + */ +extern int queue_initialise (Queue_t *queue); + +/* + * Function: void queue_free (Queue_t *queue) + * Purpose : free a queue + * Params : queue - queue to free + */ +extern void queue_free (Queue_t *queue); + +/* + * Function: Scsi_Cmnd *queue_remove (queue) + * Purpose : removes first SCSI command from a queue + * Params : queue - queue to remove command from + * Returns : Scsi_Cmnd if successful (and a reference), or NULL if no command available + */ +extern Scsi_Cmnd *queue_remove (Queue_t *queue); + +/* + * Function: Scsi_Cmnd *queue_remove_exclude_ref (queue, exclude) + * Purpose : remove a SCSI command from a queue + * Params : queue - queue to remove command from + * exclude - array of busy LUNs + * Returns : Scsi_Cmnd if successful (and a reference), or NULL if no command available + */ +extern Scsi_Cmnd *queue_remove_exclude (Queue_t *queue, unsigned long *exclude); + +#define queue_add_cmd_ordered(queue,SCpnt) \ + __queue_add(queue,SCpnt,(SCpnt)->cmnd[0] == REQUEST_SENSE) +#define queue_add_cmd_tail(queue,SCpnt) \ + __queue_add(queue,SCpnt,0) +/* + * Function: int __queue_add(Queue_t *queue, Scsi_Cmnd *SCpnt, int head) + * Purpose : Add a new command onto a queue + * Params : queue - destination queue + * SCpnt - command to add + * head - add command to head of queue + * Returns : 0 on error, !0 on success + */ +extern int __queue_add(Queue_t *queue, Scsi_Cmnd *SCpnt, int head); + +/* + * Function: Scsi_Cmnd *queue_remove_tgtluntag (queue, target, lun, tag) + * Purpose : remove a SCSI command from the queue for a specified target/lun/tag + * Params : queue - queue to remove command from + * target - target that we want + * lun - lun on device + * tag - tag on device + * Returns : Scsi_Cmnd if successful, or NULL if no command satisfies requirements + */ +extern Scsi_Cmnd *queue_remove_tgtluntag (Queue_t *queue, int target, int lun, int tag); + +/* + * Function: queue_remove_all_target(queue, target) + * Purpose : remove all SCSI commands from the queue for a specified target + * Params : queue - queue to remove command from + * target - target device id + * Returns : nothing + */ +extern void queue_remove_all_target(Queue_t *queue, int target); + +/* + * Function: int queue_probetgtlun (queue, target, lun) + * Purpose : check to see if we have a command in the queue for the specified + * target/lun. + * Params : queue - queue to look in + * target - target we want to probe + * lun - lun on target + * Returns : 0 if not found, != 0 if found + */ +extern int queue_probetgtlun (Queue_t *queue, int target, int lun); + +/* + * Function: int queue_remove_cmd (Queue_t *queue, Scsi_Cmnd *SCpnt) + * Purpose : remove a specific command from the queues + * Params : queue - queue to look in + * SCpnt - command to find + * Returns : 0 if not found + */ +int queue_remove_cmd(Queue_t *queue, Scsi_Cmnd *SCpnt); + +#endif /* QUEUE_H */ diff --git a/drivers/scsi/arm/scsi.h b/drivers/scsi/arm/scsi.h new file mode 100644 index 00000000000..2f1b3f4bf95 --- /dev/null +++ b/drivers/scsi/arm/scsi.h @@ -0,0 +1,115 @@ +/* + * linux/drivers/acorn/scsi/scsi.h + * + * Copyright (C) 2002 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Commonly used scsi driver functions. + */ + +#define BELT_AND_BRACES + +/* + * The scatter-gather list handling. This contains all + * the yucky stuff that needs to be fixed properly. + */ +static inline int copy_SCp_to_sg(struct scatterlist *sg, Scsi_Pointer *SCp, int max) +{ + int bufs = SCp->buffers_residual; + + BUG_ON(bufs + 1 > max); + + sg->page = virt_to_page(SCp->ptr); + sg->offset = offset_in_page(SCp->ptr); + sg->length = SCp->this_residual; + + if (bufs) + memcpy(sg + 1, SCp->buffer + 1, + sizeof(struct scatterlist) * bufs); + return bufs + 1; +} + +static inline int next_SCp(Scsi_Pointer *SCp) +{ + int ret = SCp->buffers_residual; + if (ret) { + SCp->buffer++; + SCp->buffers_residual--; + SCp->ptr = (char *) + (page_address(SCp->buffer->page) + + SCp->buffer->offset); + SCp->this_residual = SCp->buffer->length; + } else { + SCp->ptr = NULL; + SCp->this_residual = 0; + } + return ret; +} + +static inline unsigned char get_next_SCp_byte(Scsi_Pointer *SCp) +{ + char c = *SCp->ptr; + + SCp->ptr += 1; + SCp->this_residual -= 1; + + return c; +} + +static inline void put_next_SCp_byte(Scsi_Pointer *SCp, unsigned char c) +{ + *SCp->ptr = c; + SCp->ptr += 1; + SCp->this_residual -= 1; +} + +static inline void init_SCp(Scsi_Cmnd *SCpnt) +{ + memset(&SCpnt->SCp, 0, sizeof(struct scsi_pointer)); + + if (SCpnt->use_sg) { + unsigned long len = 0; + int buf; + + SCpnt->SCp.buffer = (struct scatterlist *) SCpnt->buffer; + SCpnt->SCp.buffers_residual = SCpnt->use_sg - 1; + SCpnt->SCp.ptr = (char *) + (page_address(SCpnt->SCp.buffer->page) + + SCpnt->SCp.buffer->offset); + SCpnt->SCp.this_residual = SCpnt->SCp.buffer->length; + +#ifdef BELT_AND_BRACES + /* + * Calculate correct buffer length. Some commands + * come in with the wrong request_bufflen. + */ + for (buf = 0; buf <= SCpnt->SCp.buffers_residual; buf++) + len += SCpnt->SCp.buffer[buf].length; + + if (SCpnt->request_bufflen != len) + printk(KERN_WARNING "scsi%d.%c: bad request buffer " + "length %d, should be %ld\n", SCpnt->device->host->host_no, + '0' + SCpnt->device->id, SCpnt->request_bufflen, len); + SCpnt->request_bufflen = len; +#endif + } else { + SCpnt->SCp.ptr = (unsigned char *)SCpnt->request_buffer; + SCpnt->SCp.this_residual = SCpnt->request_bufflen; + } + + /* + * If the upper SCSI layers pass a buffer, but zero length, + * we aren't interested in the buffer pointer. + */ + if (SCpnt->SCp.this_residual == 0 && SCpnt->SCp.ptr) { +#if 0 //def BELT_AND_BRACES + printk(KERN_WARNING "scsi%d.%c: zero length buffer passed for " + "command ", SCpnt->host->host_no, '0' + SCpnt->target); + print_command(SCpnt->cmnd); +#endif + SCpnt->SCp.ptr = NULL; + } +} -- cgit v1.2.3