From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/scsi/cpqfcTSworker.c | 6516 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 6516 insertions(+) create mode 100644 drivers/scsi/cpqfcTSworker.c (limited to 'drivers/scsi/cpqfcTSworker.c') diff --git a/drivers/scsi/cpqfcTSworker.c b/drivers/scsi/cpqfcTSworker.c new file mode 100644 index 00000000000..a5fd7427e9d --- /dev/null +++ b/drivers/scsi/cpqfcTSworker.c @@ -0,0 +1,6516 @@ +/* Copyright(c) 2000, Compaq Computer Corporation + * Fibre Channel Host Bus Adapter + * 64-bit, 66MHz PCI + * Originally developed and tested on: + * (front): [chip] Tachyon TS HPFC-5166A/1.2 L2C1090 ... + * SP# P225CXCBFIEL6T, Rev XC + * SP# 161290-001, Rev XD + * (back): Board No. 010008-001 A/W Rev X5, FAB REV X5 + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * Written by Don Zimmerman +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define SHUTDOWN_SIGS (sigmask(SIGKILL)|sigmask(SIGINT)|sigmask(SIGTERM)) + +#include +#include +#include + +#include "scsi.h" +#include // struct Scsi_Host definition for T handler +#include "cpqfcTSchip.h" +#include "cpqfcTSstructs.h" +#include "cpqfcTStrigger.h" + +//#define LOGIN_DBG 1 + +// REMARKS: +// Since Tachyon chips may be permitted to wait from 500ms up to 2 sec +// to empty an outgoing frame from its FIFO to the Fibre Channel stream, +// we cannot do everything we need to in the interrupt handler. Specifically, +// every time a link re-init (e.g. LIP) takes place, all SCSI I/O has to be +// suspended until the login sequences have been completed. Login commands +// are frames just like SCSI commands are frames; they are subject to the same +// timeout issues and delays. Also, various specs provide up to 2 seconds for +// devices to log back in (i.e. respond with ACC to a login frame), so I/O to +// that device has to be suspended. +// A serious problem here occurs on highly loaded FC-AL systems. If our FC port +// has a low priority (e.g. high arbitrated loop physical address, alpa), and +// some other device is hogging bandwidth (permissible under FC-AL), we might +// time out thinking the link is hung, when it's simply busy. Many such +// considerations complicate the design. Although Tachyon assumes control +// (in silicon) for many link-specific issues, the Linux driver is left with the +// rest, which turns out to be a difficult, time critical chore. + +// These "worker" functions will handle things like FC Logins; all +// processes with I/O to our device must wait for the Login to complete +// and (if successful) I/O to resume. In the event of a malfunctioning or +// very busy loop, it may take hundreds of millisecs or even seconds to complete +// a frame send. We don't want to hang up the entire server (and all +// processes which don't depend on Fibre) during this wait. + +// The Tachyon chip can have around 30,000 I/O operations ("exchanges") +// open at one time. However, each exchange must be initiated +// synchronously (i.e. each of the 30k I/O had to be started one at a +// time by sending a starting frame via Tachyon's outbound que). + +// To accommodate kernel "module" build, this driver limits the exchanges +// to 256, because of the contiguous physical memory limitation of 128M. + +// Typical FC Exchanges are opened presuming the FC frames start without errors, +// while Exchange completion is handled in the interrupt handler. This +// optimizes performance for the "everything's working" case. +// However, when we have FC related errors or hot plugging of FC ports, we pause +// I/O and handle FC-specific tasks in the worker thread. These FC-specific +// functions will handle things like FC Logins and Aborts. As the Login sequence +// completes to each and every target, I/O can resume to that target. + +// Our kernel "worker thread" must share the HBA with threads calling +// "queuecommand". We define a "BoardLock" semaphore which indicates +// to "queuecommand" that the HBA is unavailable, and Cmnds are added to a +// board lock Q. When the worker thread finishes with the board, the board +// lock Q commands are completed with status causing immediate retry. +// Typically, the board is locked while Logins are in progress after an +// FC Link Down condition. When Cmnds are re-queued after board lock, the +// particular Scsi channel/target may or may not have logged back in. When +// the device is waiting for login, the "prli" flag is clear, in which case +// commands are passed to a Link Down Q. Whenever the login finally completes, +// the LinkDown Q is completed, again with status causing immediate retry. +// When FC devices are logged in, we build and start FC commands to the +// devices. + +// NOTE!! As of May 2000, kernel 2.2.14, the error recovery logic for devices +// that never log back in (e.g. physically removed) is NOT completely +// understood. I've still seen instances of system hangs on failed Write +// commands (possibly from the ext2 layer?) on device removal. Such special +// cases need to be evaluated from a system/application view - e.g., how +// exactly does the system want me to complete commands when the device is +// physically removed?? + +// local functions + +static void SetLoginFields( + PFC_LOGGEDIN_PORT pLoggedInPort, + TachFCHDR_GCMND* fchs, + BOOLEAN PDisc, + BOOLEAN Originator); + +static void AnalyzeIncomingFrame( + CPQFCHBA *cpqfcHBAdata, + ULONG QNdx ); + +static void SendLogins( CPQFCHBA *cpqfcHBAdata, __u32 *FabricPortIds ); + +static int verify_PLOGI( PTACHYON fcChip, + TachFCHDR_GCMND* fchs, ULONG* reject_explain); +static int verify_PRLI( TachFCHDR_GCMND* fchs, ULONG* reject_explain); + +static void LoadWWN( PTACHYON fcChip, UCHAR* dest, UCHAR type); +static void BuildLinkServicePayload( + PTACHYON fcChip, ULONG type, void* payload); + +static void UnblockScsiDevice( struct Scsi_Host *HostAdapter, + PFC_LOGGEDIN_PORT pLoggedInPort); + +static void cpqfcTSCheckandSnoopFCP( PTACHYON fcChip, ULONG x_ID); + +static void CompleteBoardLockCmnd( CPQFCHBA *cpqfcHBAdata); + +static void RevalidateSEST( struct Scsi_Host *HostAdapter, + PFC_LOGGEDIN_PORT pLoggedInPort); + +static void IssueReportLunsCommand( + CPQFCHBA* cpqfcHBAdata, + TachFCHDR_GCMND* fchs); + +// (see scsi_error.c comments on kernel task creation) + +void cpqfcTSWorkerThread( void *host) +{ + struct Scsi_Host *HostAdapter = (struct Scsi_Host*)host; + CPQFCHBA *cpqfcHBAdata = (CPQFCHBA *)HostAdapter->hostdata; +#ifdef PCI_KERNEL_TRACE + PTACHYON fcChip = &cpqfcHBAdata->fcChip; +#endif + DECLARE_MUTEX_LOCKED(fcQueReady); + DECLARE_MUTEX_LOCKED(fcTYOBcomplete); + DECLARE_MUTEX_LOCKED(TachFrozen); + DECLARE_MUTEX_LOCKED(BoardLock); + + ENTER("WorkerThread"); + + lock_kernel(); + daemonize("cpqfcTS_wt_%d", HostAdapter->host_no); + siginitsetinv(¤t->blocked, SHUTDOWN_SIGS); + + + cpqfcHBAdata->fcQueReady = &fcQueReady; // primary wait point + cpqfcHBAdata->TYOBcomplete = &fcTYOBcomplete; + cpqfcHBAdata->TachFrozen = &TachFrozen; + + + cpqfcHBAdata->worker_thread = current; + + unlock_kernel(); + + if( cpqfcHBAdata->notify_wt != NULL ) + up( cpqfcHBAdata->notify_wt); // OK to continue + + while(1) + { + unsigned long flags; + + down_interruptible( &fcQueReady); // wait for something to do + + if (signal_pending(current) ) + break; + + PCI_TRACE( 0x90) + // first, take the IO lock so the SCSI upper layers can't call + // into our _quecommand function (this also disables INTs) + spin_lock_irqsave( HostAdapter->host_lock, flags); // STOP _que function + PCI_TRACE( 0x90) + + CPQ_SPINLOCK_HBA( cpqfcHBAdata) + // next, set this pointer to indicate to the _quecommand function + // that the board is in use, so it should que the command and + // immediately return (we don't actually require the semaphore function + // in this driver rev) + + cpqfcHBAdata->BoardLock = &BoardLock; + + PCI_TRACE( 0x90) + + // release the IO lock (and re-enable interrupts) + spin_unlock_irqrestore( HostAdapter->host_lock, flags); + + // disable OUR HBA interrupt (keep them off as much as possible + // during error recovery) + disable_irq( cpqfcHBAdata->HostAdapter->irq); + + // OK, let's process the Fibre Channel Link Q and do the work + cpqfcTS_WorkTask( HostAdapter); + + // hopefully, no more "work" to do; + // re-enable our INTs for "normal" completion processing + enable_irq( cpqfcHBAdata->HostAdapter->irq); + + + cpqfcHBAdata->BoardLock = NULL; // allow commands to be queued + CPQ_SPINUNLOCK_HBA( cpqfcHBAdata) + + + // Now, complete any Cmnd we Q'd up while BoardLock was held + + CompleteBoardLockCmnd( cpqfcHBAdata); + + + } + // hopefully, the signal was for our module exit... + if( cpqfcHBAdata->notify_wt != NULL ) + up( cpqfcHBAdata->notify_wt); // yep, we're outta here +} + + +// Freeze Tachyon routine. +// If Tachyon is already frozen, return FALSE +// If Tachyon is not frozen, call freeze function, return TRUE +// +static BOOLEAN FreezeTach( CPQFCHBA *cpqfcHBAdata) +{ + PTACHYON fcChip = &cpqfcHBAdata->fcChip; + BOOLEAN FrozeTach = FALSE; + // It's possible that the chip is already frozen; if so, + // "Freezing" again will NOT! generate another Freeze + // Completion Message. + + if( (fcChip->Registers.TYstatus.value & 0x70000) != 0x70000) + { // (need to freeze...) + fcChip->FreezeTachyon( fcChip, 2); // both ERQ and FCP assists + + // 2. Get Tach freeze confirmation + // (synchronize SEST manipulation with Freeze Completion Message) + // we need INTs on so semaphore can be set. + enable_irq( cpqfcHBAdata->HostAdapter->irq); // only way to get Semaphore + down_interruptible( cpqfcHBAdata->TachFrozen); // wait for INT handler sem. + // can we TIMEOUT semaphore wait?? TBD + disable_irq( cpqfcHBAdata->HostAdapter->irq); + + FrozeTach = TRUE; + } // (else, already frozen) + + return FrozeTach; +} + + + + +// This is the kernel worker thread task, which processes FC +// tasks which were queued by the Interrupt handler or by +// other WorkTask functions. + +#define DBG 1 +//#undef DBG +void cpqfcTS_WorkTask( struct Scsi_Host *HostAdapter) +{ + CPQFCHBA *cpqfcHBAdata = (CPQFCHBA *)HostAdapter->hostdata; + PTACHYON fcChip = &cpqfcHBAdata->fcChip; + FC_EXCHANGES *Exchanges = fcChip->Exchanges; + ULONG QconsumerNdx; + LONG ExchangeID; + ULONG ulStatus=0; + TachFCHDR_GCMND fchs; + PFC_LINK_QUE fcLQ = cpqfcHBAdata->fcLQ; + + ENTER("WorkTask"); + + // copy current index to work on + QconsumerNdx = fcLQ->consumer; + + PCI_TRACEO( fcLQ->Qitem[QconsumerNdx].Type, 0x90) + + + // NOTE: when this switch completes, we will "consume" the Que item +// printk("Que type %Xh\n", fcLQ->Qitem[QconsumerNdx].Type); + switch( fcLQ->Qitem[QconsumerNdx].Type ) + { + // incoming frame - link service (ACC, UNSOL REQ, etc.) + // or FCP-SCSI command + case SFQ_UNKNOWN: + AnalyzeIncomingFrame( cpqfcHBAdata, QconsumerNdx ); + + break; + + + + case EXCHANGE_QUEUED: // an Exchange (i.e. FCP-SCSI) was previously + // Queued because the link was down. The + // heartbeat timer detected it and Queued it here. + // We attempt to start it again, and if + // successful we clear the EXCHANGE_Q flag. + // If the link doesn't come up, the Exchange + // will eventually time-out. + + ExchangeID = (LONG) // x_ID copied from DPC timeout function + fcLQ->Qitem[QconsumerNdx].ulBuff[0]; + + // It's possible that a Q'd exchange could have already + // been started by other logic (e.g. ABTS process) + // Don't start if already started (Q'd flag clear) + + if( Exchanges->fcExchange[ExchangeID].status & EXCHANGE_QUEUED ) + { +// printk(" *Start Q'd x_ID %Xh: type %Xh ", +// ExchangeID, Exchanges->fcExchange[ExchangeID].type); + + ulStatus = cpqfcTSStartExchange( cpqfcHBAdata, ExchangeID); + if( !ulStatus ) + { +// printk("success* "); + } + else + { +#ifdef DBG + + if( ulStatus == EXCHANGE_QUEUED) + printk("Queued* "); + else + printk("failed* "); + +#endif + } + } + break; + + + case LINKDOWN: + // (lots of things already done in INT handler) future here? + break; + + + case LINKACTIVE: // Tachyon set the Lup bit in FM status + // NOTE: some misbehaving FC ports (like Tach2.1) + // can re-LIP immediately after a LIP completes. + + // if "initiator", need to verify LOGs with ports +// printk("\n*LNKUP* "); + + if( fcChip->Options.initiator ) + SendLogins( cpqfcHBAdata, NULL ); // PLOGI or PDISC, based on fcPort data + // if SendLogins successfully completes, PortDiscDone + // will be set. + + + // If SendLogins was successful, then we expect to get incoming + // ACCepts or REJECTs, which are handled below. + + break; + + // LinkService and Fabric request/reply processing + case ELS_FDISC: // need to send Fabric Discovery (Login) + case ELS_FLOGI: // need to send Fabric Login + case ELS_SCR: // need to send State Change Registration + case FCS_NSR: // need to send Name Service Request + case ELS_PLOGI: // need to send PLOGI + case ELS_ACC: // send generic ACCept + case ELS_PLOGI_ACC: // need to send ELS ACCept frame to recv'd PLOGI + case ELS_PRLI_ACC: // need to send ELS ACCept frame to recv'd PRLI + case ELS_LOGO: // need to send ELS LOGO (logout) + case ELS_LOGO_ACC: // need to send ELS ACCept frame to recv'd PLOGI + case ELS_RJT: // ReJecT reply + case ELS_PRLI: // need to send ELS PRLI + + +// printk(" *ELS %Xh* ", fcLQ->Qitem[QconsumerNdx].Type); + // if PortDiscDone is not set, it means the SendLogins routine + // failed to complete -- assume that LDn occurred, so login frames + // are invalid + if( !cpqfcHBAdata->PortDiscDone) // cleared by LDn + { + printk("Discard Q'd ELS login frame\n"); + break; + } + + ulStatus = cpqfcTSBuildExchange( + cpqfcHBAdata, + fcLQ->Qitem[QconsumerNdx].Type, // e.g. PLOGI + (TachFCHDR_GCMND*) + fcLQ->Qitem[QconsumerNdx].ulBuff, // incoming fchs + NULL, // no data (no scatter/gather list) + &ExchangeID );// fcController->fcExchanges index, -1 if failed + + if( !ulStatus ) // Exchange setup? + { + ulStatus = cpqfcTSStartExchange( cpqfcHBAdata, ExchangeID ); + if( !ulStatus ) + { + // submitted to Tach's Outbound Que (ERQ PI incremented) + // waited for completion for ELS type (Login frames issued + // synchronously) + } + else + // check reason for Exchange not being started - we might + // want to Queue and start later, or fail with error + { + + } + } + + else // Xchange setup failed... + printk(" cpqfcTSBuildExchange failed: %Xh\n", ulStatus ); + + break; + + case SCSI_REPORT_LUNS: + // pass the incoming frame (actually, it's a PRLI frame) + // so we can send REPORT_LUNS, in order to determine VSA/PDU + // FCP-SCSI Lun address mode + IssueReportLunsCommand( cpqfcHBAdata, (TachFCHDR_GCMND*) + fcLQ->Qitem[QconsumerNdx].ulBuff); + + break; + + + + + case BLS_ABTS: // need to ABORT one or more exchanges + { + LONG x_ID = fcLQ->Qitem[QconsumerNdx].ulBuff[0]; + BOOLEAN FrozeTach = FALSE; + + if ( x_ID >= TACH_SEST_LEN ) // (in)sanity check + { +// printk( " cpqfcTS ERROR! BOGUS x_ID %Xh", x_ID); + break; + } + + + if( Exchanges->fcExchange[ x_ID].Cmnd == NULL ) // should be RARE + { +// printk(" ABTS %Xh Scsi Cmnd null! ", x_ID); + + break; // nothing to abort! + } + +//#define ABTS_DBG +#ifdef ABTS_DBG + printk("INV SEST[%X] ", x_ID); + if( Exchanges->fcExchange[x_ID].status & FC2_TIMEOUT) + { + printk("FC2TO"); + } + if( Exchanges->fcExchange[x_ID].status & INITIATOR_ABORT) + { + printk("IA"); + } + if( Exchanges->fcExchange[x_ID].status & PORTID_CHANGED) + { + printk("PORTID"); + } + if( Exchanges->fcExchange[x_ID].status & DEVICE_REMOVED) + { + printk("DEVRM"); + } + if( Exchanges->fcExchange[x_ID].status & LINKFAIL_TX) + { + printk("LKF"); + } + if( Exchanges->fcExchange[x_ID].status & FRAME_TO) + { + printk("FRMTO"); + } + if( Exchanges->fcExchange[x_ID].status & ABORTSEQ_NOTIFY) + { + printk("ABSQ"); + } + if( Exchanges->fcExchange[x_ID].status & SFQ_FRAME) + { + printk("SFQFR"); + } + + if( Exchanges->fcExchange[ x_ID].type == 0x2000) + printk(" WR"); + else if( Exchanges->fcExchange[ x_ID].type == 0x3000) + printk(" RD"); + else if( Exchanges->fcExchange[ x_ID].type == 0x10) + printk(" ABTS"); + else + printk(" %Xh", Exchanges->fcExchange[ x_ID].type); + + if( !(Exchanges->fcExchange[x_ID].status & INITIATOR_ABORT)) + { + printk(" Cmd %p, ", + Exchanges->fcExchange[ x_ID].Cmnd); + + printk(" brd/chn/trg/lun %d/%d/%d/%d port_id %06X\n", + cpqfcHBAdata->HBAnum, + Exchanges->fcExchange[ x_ID].Cmnd->channel, + Exchanges->fcExchange[ x_ID].Cmnd->target, + Exchanges->fcExchange[ x_ID].Cmnd->lun, + Exchanges->fcExchange[ x_ID].fchs.d_id & 0xFFFFFF); + } + else // assume that Cmnd ptr is invalid on _abort() + { + printk(" Cmd ptr invalid\n"); + } + +#endif + + + // Steps to ABORT a SEST exchange: + // 1. Freeze TL SCSI assists & ERQ (everything) + // 2. Receive FROZEN inbound CM (must succeed!) + // 3. Invalidate x_ID SEST entry + // 4. Resume TL SCSI assists & ERQ (everything) + // 5. Build/start on exchange - change "type" to BLS_ABTS, + // timeout to X sec (RA_TOV from PLDA is actually 0) + // 6. Set Exchange Q'd status if ABTS cannot be started, + // or simply complete Exchange in "Terminate" condition + + PCI_TRACEO( x_ID, 0xB4) + + // 1 & 2 . Freeze Tach & get confirmation of freeze + FrozeTach = FreezeTach( cpqfcHBAdata); + + // 3. OK, Tachyon is frozen, so we can invalidate SEST exchange. + // FC2_TIMEOUT means we are originating the abort, while + // TARGET_ABORT means we are ACCepting an abort. + // LINKFAIL_TX, ABORTSEQ_NOFITY, INV_ENTRY or FRAME_TO are + // all from Tachyon: + // Exchange was corrupted by LDn or other FC physical failure + // INITIATOR_ABORT means the upper layer driver/application + // requested the abort. + + + + // clear bit 31 (VALid), to invalidate & take control from TL + fcChip->SEST->u[ x_ID].IWE.Hdr_Len &= 0x7FFFFFFF; + + + // examine and Tach's "Linked List" for IWEs that + // received (nearly) simultaneous transfer ready (XRDY) + // repair linked list if necessary (TBD!) + // (If we ignore the "Linked List", we will time out + // WRITE commands where we received the FCP-SCSI XFRDY + // frame (because Tachyon didn't processes it). Linked List + // management should be done as an optimization. + +// readl( fcChip->Registers.ReMapMemBase+TL_MEM_SEST_LINKED_LIST )); + + + + + // 4. Resume all Tachlite functions (for other open Exchanges) + // as quickly as possible to allow other exchanges to other ports + // to resume. Freezing Tachyon may cause cascading errors, because + // any received SEST frame cannot be processed by the SEST. + // Don't "unfreeze" unless Link is operational + if( FrozeTach ) // did we just freeze it (above)? + fcChip->UnFreezeTachyon( fcChip, 2); // both ERQ and FCP assists + + + PCI_TRACEO( x_ID, 0xB4) + + // Note there is no confirmation that the chip is "unfrozen". Also, + // if the Link is down when unfreeze is called, it has no effect. + // Chip will unfreeze when the Link is back up. + + // 5. Now send out Abort commands if possible + // Some Aborts can't be "sent" (Port_id changed or gone); + // if the device is gone, there is no port_id to send the ABTS to. + + if( !(Exchanges->fcExchange[ x_ID].status & PORTID_CHANGED) + && + !(Exchanges->fcExchange[ x_ID].status & DEVICE_REMOVED) ) + { + Exchanges->fcExchange[ x_ID].type = BLS_ABTS; + fchs.s_id = Exchanges->fcExchange[ x_ID].fchs.d_id; + ulStatus = cpqfcTSBuildExchange( + cpqfcHBAdata, + BLS_ABTS, + &fchs, // (uses only s_id) + NULL, // (no scatter/gather list for ABTS) + &x_ID );// ABTS on this Exchange ID + + if( !ulStatus ) // Exchange setup build OK? + { + + // ABTS may be needed because an Exchange was corrupted + // by a Link disruption. If the Link is UP, we can + // presume that this ABTS can start immediately; otherwise, + // set Que'd status so the Login functions + // can restart it when the FC physical Link is restored + if( ((fcChip->Registers.FMstatus.value &0xF0) &0x80)) // loop init? + { +// printk(" *set Q status x_ID %Xh on LDn* ", x_ID); + Exchanges->fcExchange[ x_ID].status |= EXCHANGE_QUEUED; + } + + else // what FC device (port_id) does the Cmd belong to? + { + PFC_LOGGEDIN_PORT pLoggedInPort = + Exchanges->fcExchange[ x_ID].pLoggedInPort; + + // if Port is logged in, we might start the abort. + + if( (pLoggedInPort != NULL) + && + (pLoggedInPort->prli == TRUE) ) + { + // it's possible that an Exchange has already been Queued + // to start after Login completes. Check and don't + // start it (again) here if Q'd status set +// printk(" ABTS xchg %Xh ", x_ID); + if( Exchanges->fcExchange[x_ID].status & EXCHANGE_QUEUED) + { +// printk("already Q'd "); + } + else + { +// printk("starting "); + + fcChip->fcStats.FC2aborted++; + ulStatus = cpqfcTSStartExchange( cpqfcHBAdata, x_ID ); + if( !ulStatus ) + { + // OK + // submitted to Tach's Outbound Que (ERQ PI incremented) + } + else + { +/* printk("ABTS exchange start failed -status %Xh, x_ID %Xh ", + ulStatus, x_ID); +*/ + } + } + } + else + { +/* printk(" ABTS NOT starting xchg %Xh, %p ", + x_ID, pLoggedInPort); + if( pLoggedInPort ) + printk("prli %d ", pLoggedInPort->prli); +*/ + } + } + } + else // what the #@! + { // how do we fail to build an Exchange for ABTS?? + printk("ABTS exchange build failed -status %Xh, x_ID %Xh\n", + ulStatus, x_ID); + } + } + else // abort without ABTS -- just complete exchange/Cmnd to Linux + { +// printk(" *Terminating x_ID %Xh on %Xh* ", +// x_ID, Exchanges->fcExchange[x_ID].status); + cpqfcTSCompleteExchange( cpqfcHBAdata->PciDev, fcChip, x_ID); + + } + } // end of ABTS case + break; + + + + case BLS_ABTS_ACC: // need to ACCept one ABTS + // (NOTE! this code not updated for Linux yet..) + + + printk(" *ABTS_ACC* "); + // 1. Freeze TL + + fcChip->FreezeTachyon( fcChip, 2); // both ERQ and FCP assists + + memcpy( // copy the incoming ABTS frame + &fchs, + fcLQ->Qitem[QconsumerNdx].ulBuff, // incoming fchs + sizeof( fchs)); + + // 3. OK, Tachyon is frozen so we can invalidate SEST entry + // (if necessary) + // Status FC2_TIMEOUT means we are originating the abort, while + // TARGET_ABORT means we are ACCepting an abort + + ExchangeID = fchs.ox_rx_id & 0x7FFF; // RX_ID for exchange +// printk("ABTS ACC for Target ExchangeID %Xh\n", ExchangeID); + + + // sanity check on received ExchangeID + if( Exchanges->fcExchange[ ExchangeID].status == TARGET_ABORT ) + { + // clear bit 31 (VALid), to invalidate & take control from TL +// printk("Invalidating SEST exchange %Xh\n", ExchangeID); + fcChip->SEST->u[ ExchangeID].IWE.Hdr_Len &= 0x7FFFFFFF; + } + + + // 4. Resume all Tachlite functions (for other open Exchanges) + // as quickly as possible to allow other exchanges to other ports + // to resume. Freezing Tachyon for too long may royally screw + // up everything! + fcChip->UnFreezeTachyon( fcChip, 2); // both ERQ and FCP assists + + // Note there is no confirmation that the chip is "unfrozen". Also, + // if the Link is down when unfreeze is called, it has no effect. + // Chip will unfreeze when the Link is back up. + + // 5. Now send out Abort ACC reply for this exchange + Exchanges->fcExchange[ ExchangeID].type = BLS_ABTS_ACC; + + fchs.s_id = Exchanges->fcExchange[ ExchangeID].fchs.d_id; + ulStatus = cpqfcTSBuildExchange( + cpqfcHBAdata, + BLS_ABTS_ACC, + &fchs, + NULL, // no data (no scatter/gather list) + &ExchangeID );// fcController->fcExchanges index, -1 if failed + + if( !ulStatus ) // Exchange setup? + { + ulStatus = cpqfcTSStartExchange( cpqfcHBAdata, ExchangeID ); + if( !ulStatus ) + { + // submitted to Tach's Outbound Que (ERQ PI incremented) + // waited for completion for ELS type (Login frames issued + // synchronously) + } + else + // check reason for Exchange not being started - we might + // want to Queue and start later, or fail with error + { + + } + } + break; + + + case BLS_ABTS_RJT: // need to ReJecT one ABTS; reject implies the + // exchange doesn't exist in the TARGET context. + // ExchangeID has to come from LinkService space. + + printk(" *ABTS_RJT* "); + ulStatus = cpqfcTSBuildExchange( + cpqfcHBAdata, + BLS_ABTS_RJT, + (TachFCHDR_GCMND*) + fcLQ->Qitem[QconsumerNdx].ulBuff, // incoming fchs + NULL, // no data (no scatter/gather list) + &ExchangeID );// fcController->fcExchanges index, -1 if failed + + if( !ulStatus ) // Exchange setup OK? + { + ulStatus = cpqfcTSStartExchange( cpqfcHBAdata, ExchangeID ); + // If it fails, we aren't required to retry. + } + if( ulStatus ) + { + printk("Failed to send BLS_RJT for ABTS, X_ID %Xh\n", ExchangeID); + } + else + { + printk("Sent BLS_RJT for ABTS, X_ID %Xh\n", ExchangeID); + + } + + break; + + + + default: + break; + } // end switch +//doNothing: + // done with this item - now set the NEXT index + + if( QconsumerNdx+1 >= FC_LINKQ_DEPTH ) // rollover test + { + fcLQ->consumer = 0; + } + else + { + fcLQ->consumer++; + } + + PCI_TRACEO( fcLQ->Qitem[QconsumerNdx].Type, 0x94) + + LEAVE("WorkTask"); + return; +} + + + + +// When Tachyon reports link down, bad al_pa, or Link Service (e.g. Login) +// commands come in, post to the LinkQ so that action can be taken outside the +// interrupt handler. +// This circular Q works like Tachyon's que - the producer points to the next +// (unused) entry. Called by Interrupt handler, WorkerThread, Timer +// sputlinkq +void cpqfcTSPutLinkQue( CPQFCHBA *cpqfcHBAdata, + int Type, + void *QueContent) +{ + PTACHYON fcChip = &cpqfcHBAdata->fcChip; +// FC_EXCHANGES *Exchanges = fcChip->Exchanges; + PFC_LINK_QUE fcLQ = cpqfcHBAdata->fcLQ; + ULONG ndx; + + ENTER("cpqfcTSPutLinkQ"); + + ndx = fcLQ->producer; + + ndx += 1; // test for Que full + + + + if( ndx >= FC_LINKQ_DEPTH ) // rollover test + ndx = 0; + + if( ndx == fcLQ->consumer ) // QUE full test + { + // QUE was full! lost LK command (fatal to logic) + fcChip->fcStats.lnkQueFull++; + + printk("*LinkQ Full!*"); + TriggerHBA( fcChip->Registers.ReMapMemBase, 1); +/* + { + int i; + printk("LinkQ PI %d, CI %d\n", fcLQ->producer, + fcLQ->consumer); + + for( i=0; i< FC_LINKQ_DEPTH; ) + { + printk(" [%d]%Xh ", i, fcLQ->Qitem[i].Type); + if( (++i %8) == 0) printk("\n"); + } + + } +*/ + printk( "cpqfcTS: WARNING!! PutLinkQue - FULL!\n"); // we're hung + } + else // QUE next element + { + // Prevent certain multiple (back-to-back) requests. + // This is important in that we don't want to issue multiple + // ABTS for the same Exchange, or do multiple FM inits, etc. + // We can never be sure of the timing of events reported to + // us by Tach's IMQ, which can depend on system/bus speeds, + // FC physical link circumstances, etc. + + if( (fcLQ->producer != fcLQ->consumer) + && + (Type == FMINIT) ) + { + LONG lastNdx; // compute previous producer index + if( fcLQ->producer) + lastNdx = fcLQ->producer- 1; + else + lastNdx = FC_LINKQ_DEPTH-1; + + + if( fcLQ->Qitem[lastNdx].Type == FMINIT) + { +// printk(" *skip FMINIT Q post* "); +// goto DoneWithPutQ; + } + + } + + // OK, add the Q'd item... + + fcLQ->Qitem[fcLQ->producer].Type = Type; + + memcpy( + fcLQ->Qitem[fcLQ->producer].ulBuff, + QueContent, + sizeof(fcLQ->Qitem[fcLQ->producer].ulBuff)); + + fcLQ->producer = ndx; // increment Que producer + + // set semaphore to wake up Kernel (worker) thread + // + up( cpqfcHBAdata->fcQueReady ); + } + +//DoneWithPutQ: + + LEAVE("cpqfcTSPutLinkQ"); +} + + + + +// reset device ext FC link Q +void cpqfcTSLinkQReset( CPQFCHBA *cpqfcHBAdata) + +{ + PFC_LINK_QUE fcLQ = cpqfcHBAdata->fcLQ; + fcLQ->producer = 0; + fcLQ->consumer = 0; + +} + + + + + +// When Tachyon gets an unassisted FCP-SCSI frame, post here so +// an arbitrary context thread (e.g. IOCTL loopback test function) +// can process it. + +// (NOTE: Not revised for Linux) +// This Q works like Tachyon's que - the producer points to the next +// (unused) entry. +void cpqfcTSPutScsiQue( CPQFCHBA *cpqfcHBAdata, + int Type, + void *QueContent) +{ +// CPQFCHBA *cpqfcHBAdata = (CPQFCHBA *)HostAdapter->hostdata; +// PTACHYON fcChip = &cpqfcHBAdata->fcChip; + +// ULONG ndx; + +// ULONG *pExchangeID; +// LONG ExchangeID; + +/* + KeAcquireSpinLockAtDpcLevel( &pDevExt->fcScsiQueLock); + ndx = pDevExt->fcScsiQue.producer + 1; // test for Que full + + if( ndx >= FC_SCSIQ_DEPTH ) // rollover test + ndx = 0; + + if( ndx == pDevExt->fcScsiQue.consumer ) // QUE full test + { + // QUE was full! lost LK command (fatal to logic) + fcChip->fcStats.ScsiQueFull++; +#ifdef DBG + printk( "fcPutScsiQue - FULL!\n"); +#endif + + } + else // QUE next element + { + pDevExt->fcScsiQue.Qitem[pDevExt->fcScsiQue.producer].Type = Type; + + if( Type == FCP_RSP ) + { + // this TL inbound message type means that a TL SEST exchange has + // copied an FCP response frame into a buffer pointed to by the SEST + // entry. That buffer is allocated in the SEST structure at ->RspHDR. + // Copy the RspHDR for use by the Que handler. + pExchangeID = (ULONG *)QueContent; + + memcpy( + pDevExt->fcScsiQue.Qitem[pDevExt->fcScsiQue.producer].ulBuff, + &fcChip->SEST->RspHDR[ *pExchangeID ], + sizeof(pDevExt->fcScsiQue.Qitem[0].ulBuff)); // (any element for size) + + } + else + { + memcpy( + pDevExt->fcScsiQue.Qitem[pDevExt->fcScsiQue.producer].ulBuff, + QueContent, + sizeof(pDevExt->fcScsiQue.Qitem[pDevExt->fcScsiQue.producer].ulBuff)); + } + + pDevExt->fcScsiQue.producer = ndx; // increment Que + + + KeSetEvent( &pDevExt->TYIBscsi, // signal any waiting thread + 0, // no priority boost + FALSE ); // no waiting later for this event + } + KeReleaseSpinLockFromDpcLevel( &pDevExt->fcScsiQueLock); +*/ +} + + + + + + + +static void ProcessELS_Request( CPQFCHBA*,TachFCHDR_GCMND*); + +static void ProcessELS_Reply( CPQFCHBA*,TachFCHDR_GCMND*); + +static void ProcessFCS_Reply( CPQFCHBA*,TachFCHDR_GCMND*); + +void cpqfcTSImplicitLogout( CPQFCHBA* cpqfcHBAdata, + PFC_LOGGEDIN_PORT pFcPort) +{ + PTACHYON fcChip = &cpqfcHBAdata->fcChip; + + if( pFcPort->port_id != 0xFFFC01 ) // don't care about Fabric + { + fcChip->fcStats.logouts++; + printk("cpqfcTS: Implicit logout of WWN %08X%08X, port_id %06X\n", + (ULONG)pFcPort->u.liWWN, + (ULONG)(pFcPort->u.liWWN >>32), + pFcPort->port_id); + + // Terminate I/O with this (Linux) Scsi target + cpqfcTSTerminateExchange( cpqfcHBAdata, + &pFcPort->ScsiNexus, + DEVICE_REMOVED); + } + + // Do an "implicit logout" - we can't really Logout the device + // (i.e. with LOGOut Request) because of port_id confusion + // (i.e. the Other port has no port_id). + // A new login for that WWN will have to re-write port_id (0 invalid) + pFcPort->port_id = 0; // invalid! + pFcPort->pdisc = FALSE; + pFcPort->prli = FALSE; + pFcPort->plogi = FALSE; + pFcPort->flogi = FALSE; + pFcPort->LOGO_timer = 0; + pFcPort->device_blocked = TRUE; // block Scsi Requests + pFcPort->ScsiNexus.VolumeSetAddressing=0; +} + + +// On FC-AL, there is a chance that a previously known device can +// be quietly removed (e.g. with non-managed hub), +// while a NEW device (with different WWN) took the same alpa or +// even 24-bit port_id. This chance is unlikely but we must always +// check for it. +static void TestDuplicatePortId( CPQFCHBA* cpqfcHBAdata, + PFC_LOGGEDIN_PORT pLoggedInPort) +{ + PTACHYON fcChip = &cpqfcHBAdata->fcChip; + // set "other port" at beginning of fcPorts list + PFC_LOGGEDIN_PORT pOtherPortWithPortId = fcChip->fcPorts.pNextPort; + while( pOtherPortWithPortId ) + { + if( (pOtherPortWithPortId->port_id == + pLoggedInPort->port_id) + && + (pOtherPortWithPortId != pLoggedInPort) ) + { + // trouble! (Implicitly) Log the other guy out + printk(" *port_id %Xh is duplicated!* ", + pOtherPortWithPortId->port_id); + cpqfcTSImplicitLogout( cpqfcHBAdata, pOtherPortWithPortId); + } + pOtherPortWithPortId = pOtherPortWithPortId->pNextPort; + } +} + + + + + + +// Dynamic Memory Allocation for newly discovered FC Ports. +// For simplicity, maintain fcPorts structs for ALL +// for discovered devices, including those we never do I/O with +// (e.g. Fabric addresses) + +static PFC_LOGGEDIN_PORT CreateFcPort( + CPQFCHBA* cpqfcHBAdata, + PFC_LOGGEDIN_PORT pLastLoggedInPort, + TachFCHDR_GCMND* fchs, + LOGIN_PAYLOAD* plogi) +{ + PTACHYON fcChip = &cpqfcHBAdata->fcChip; + PFC_LOGGEDIN_PORT pNextLoggedInPort = NULL; + int i; + + + printk("cpqfcTS: New FC port %06Xh WWN: ", fchs->s_id); + for( i=3; i>=0; i--) // copy the LOGIN port's WWN + printk("%02X", plogi->port_name[i]); + for( i=7; i>3; i--) // copy the LOGIN port's WWN + printk("%02X", plogi->port_name[i]); + + + // allocate mem for new port + // (these are small and rare allocations...) + pNextLoggedInPort = kmalloc( sizeof( FC_LOGGEDIN_PORT), GFP_ATOMIC ); + + + // allocation succeeded? Fill out NEW PORT + if( pNextLoggedInPort ) + { + // clear out any garbage (sometimes exists) + memset( pNextLoggedInPort, 0, sizeof( FC_LOGGEDIN_PORT)); + + + // If we login to a Fabric, we don't want to treat it + // as a SCSI device... + if( (fchs->s_id & 0xFFF000) != 0xFFF000) + { + int i; + + // create a unique "virtual" SCSI Nexus (for now, just a + // new target ID) -- we will update channel/target on REPORT_LUNS + // special case for very first SCSI target... + if( cpqfcHBAdata->HostAdapter->max_id == 0) + { + pNextLoggedInPort->ScsiNexus.target = 0; + fcChip->fcPorts.ScsiNexus.target = -1; // don't use "stub" + } + else + { + pNextLoggedInPort->ScsiNexus.target = + cpqfcHBAdata->HostAdapter->max_id; + } + + // initialize the lun[] Nexus struct for lun masking + for( i=0; i< CPQFCTS_MAX_LUN; i++) + pNextLoggedInPort->ScsiNexus.lun[i] = 0xFF; // init to NOT USED + + pNextLoggedInPort->ScsiNexus.channel = 0; // cpqfcTS has 1 FC port + + printk(" SCSI Chan/Trgt %d/%d", + pNextLoggedInPort->ScsiNexus.channel, + pNextLoggedInPort->ScsiNexus.target); + + // tell Scsi layers about the new target... + cpqfcHBAdata->HostAdapter->max_id++; +// printk("HostAdapter->max_id = %d\n", +// cpqfcHBAdata->HostAdapter->max_id); + } + else + { + // device is NOT SCSI (in case of Fabric) + pNextLoggedInPort->ScsiNexus.target = -1; // invalid + } + + // create forward link to new port + pLastLoggedInPort->pNextPort = pNextLoggedInPort; + printk("\n"); + + } + return pNextLoggedInPort; // NULL on allocation failure +} // end NEW PORT (WWN) logic + + + +// For certain cases, we want to terminate exchanges without +// sending ABTS to the device. Examples include when an FC +// device changed it's port_id after Loop re-init, or when +// the device sent us a logout. In the case of changed port_id, +// we want to complete the command and return SOFT_ERROR to +// force a re-try. In the case of LOGOut, we might return +// BAD_TARGET if the device is really gone. +// Since we must ensure that Tachyon is not operating on the +// exchange, we have to freeze the chip +// sterminateex +void cpqfcTSTerminateExchange( + CPQFCHBA* cpqfcHBAdata, SCSI_NEXUS *ScsiNexus, int TerminateStatus) +{ + PTACHYON fcChip = &cpqfcHBAdata->fcChip; + FC_EXCHANGES *Exchanges = fcChip->Exchanges; + ULONG x_ID; + + if( ScsiNexus ) + { +// printk("TerminateExchange: ScsiNexus chan/target %d/%d\n", +// ScsiNexus->channel, ScsiNexus->target); + + } + + for( x_ID = 0; x_ID < TACH_SEST_LEN; x_ID++) + { + if( Exchanges->fcExchange[x_ID].type ) // in use? + { + if( ScsiNexus == NULL ) // our HBA changed - term. all + { + Exchanges->fcExchange[x_ID].status = TerminateStatus; + cpqfcTSPutLinkQue( cpqfcHBAdata, BLS_ABTS, &x_ID ); + } + else + { + // If a device, according to WWN, has been removed, it's + // port_id may be used by another working device, so we + // have to terminate by SCSI target, NOT port_id. + if( Exchanges->fcExchange[x_ID].Cmnd) // Cmnd in progress? + { + if( (Exchanges->fcExchange[x_ID].Cmnd->device->id == ScsiNexus->target) + && + (Exchanges->fcExchange[x_ID].Cmnd->device->channel == ScsiNexus->channel)) + { + Exchanges->fcExchange[x_ID].status = TerminateStatus; + cpqfcTSPutLinkQue( cpqfcHBAdata, BLS_ABTS, &x_ID ); // timed-out + } + } + + // (in case we ever need it...) + // all SEST structures have a remote node ID at SEST DWORD 2 + // if( (fcChip->SEST->u[ x_ID ].TWE.Remote_Node_ID >> 8) + // == port_id) + } + } + } +} + + +static void ProcessELS_Request( + CPQFCHBA* cpqfcHBAdata, TachFCHDR_GCMND* fchs) +{ + PTACHYON fcChip = &cpqfcHBAdata->fcChip; +// FC_EXCHANGES *Exchanges = fcChip->Exchanges; +// ULONG ox_id = (fchs->ox_rx_id >>16); + PFC_LOGGEDIN_PORT pLoggedInPort=NULL, pLastLoggedInPort; + BOOLEAN NeedReject = FALSE; + ULONG ls_reject_code = 0; // default don'n know?? + + + // Check the incoming frame for a supported ELS type + switch( fchs->pl[0] & 0xFFFF) + { + case 0x0050: // PDISC? + + // Payload for PLOGI and PDISC is identical (request & reply) + if( !verify_PLOGI( fcChip, fchs, &ls_reject_code) ) // valid payload? + { + LOGIN_PAYLOAD logi; // FC-PH Port Login + + // PDISC payload OK. If critical login fields + // (e.g. WWN) matches last login for this port_id, + // we may resume any prior exchanges + // with the other port + + + BigEndianSwap( (UCHAR*)&fchs->pl[0], (UCHAR*)&logi, sizeof(logi)); + + pLoggedInPort = fcFindLoggedInPort( + fcChip, + NULL, // don't search Scsi Nexus + 0, // don't search linked list for port_id + &logi.port_name[0], // search linked list for WWN + &pLastLoggedInPort); // must return non-NULL; when a port_id + // is not found, this pointer marks the + // end of the singly linked list + + if( pLoggedInPort != NULL) // WWN found (prior login OK) + { + + if( (fchs->s_id & 0xFFFFFF) == pLoggedInPort->port_id) + { + // Yes. We were expecting PDISC? + if( pLoggedInPort->pdisc ) + { + // Yes; set fields accordingly. (PDISC, not Originator) + SetLoginFields( pLoggedInPort, fchs, TRUE, FALSE); + + // send 'ACC' reply + cpqfcTSPutLinkQue( cpqfcHBAdata, + ELS_PLOGI_ACC, // (PDISC same as PLOGI ACC) + fchs ); + + // OK to resume I/O... + } + else + { + printk("Not expecting PDISC (pdisc=FALSE)\n"); + NeedReject = TRUE; + // set reject reason code + ls_reject_code = + LS_RJT_REASON( PROTOCOL_ERROR, INITIATOR_CTL_ERROR); + } + } + else + { + if( pLoggedInPort->port_id != 0) + { + printk("PDISC PortID change: old %Xh, new %Xh\n", + pLoggedInPort->port_id, fchs->s_id &0xFFFFFF); + } + NeedReject = TRUE; + // set reject reason code + ls_reject_code = + LS_RJT_REASON( PROTOCOL_ERROR, INITIATOR_CTL_ERROR); + + } + } + else + { + printk("PDISC Request from unknown WWN\n"); + NeedReject = TRUE; + + // set reject reason code + ls_reject_code = + LS_RJT_REASON( LOGICAL_ERROR, INVALID_PORT_NAME); + } + + } + else // Payload unacceptable + { + printk("payload unacceptable\n"); + NeedReject = TRUE; // reject code already set + + } + + if( NeedReject) + { + ULONG port_id; + // The PDISC failed. Set login struct flags accordingly, + // terminate any I/O to this port, and Q a PLOGI + if( pLoggedInPort ) + { + pLoggedInPort->pdisc = FALSE; + pLoggedInPort->prli = FALSE; + pLoggedInPort->plogi = FALSE; + + cpqfcTSTerminateExchange( cpqfcHBAdata, + &pLoggedInPort->ScsiNexus, PORTID_CHANGED); + port_id = pLoggedInPort->port_id; + } + else + { + port_id = fchs->s_id &0xFFFFFF; + } + fchs->reserved = ls_reject_code; // borrow this (unused) field + cpqfcTSPutLinkQue( cpqfcHBAdata, ELS_RJT, fchs ); + } + + break; + + + + case 0x0003: // PLOGI? + + // Payload for PLOGI and PDISC is identical (request & reply) + if( !verify_PLOGI( fcChip, fchs, &ls_reject_code) ) // valid payload? + { + LOGIN_PAYLOAD logi; // FC-PH Port Login + BOOLEAN NeedReject = FALSE; + + // PDISC payload OK. If critical login fields + // (e.g. WWN) matches last login for this port_id, + // we may resume any prior exchanges + // with the other port + + + BigEndianSwap( (UCHAR*)&fchs->pl[0], (UCHAR*)&logi, sizeof(logi)); + + pLoggedInPort = fcFindLoggedInPort( + fcChip, + NULL, // don't search Scsi Nexus + 0, // don't search linked list for port_id + &logi.port_name[0], // search linked list for WWN + &pLastLoggedInPort); // must return non-NULL; when a port_id + // is not found, this pointer marks the + // end of the singly linked list + + if( pLoggedInPort == NULL) // WWN not found -New Port + { + pLoggedInPort = CreateFcPort( + cpqfcHBAdata, + pLastLoggedInPort, + fchs, + &logi); + if( pLoggedInPort == NULL ) + { + printk(" cpqfcTS: New port allocation failed - lost FC device!\n"); + // Now Q a LOGOut Request, since we won't be talking to that device + + NeedReject = TRUE; + + // set reject reason code + ls_reject_code = + LS_RJT_REASON( LOGICAL_ERROR, NO_LOGIN_RESOURCES); + + } + } + if( !NeedReject ) + { + + // OK - we have valid fcPort ptr; set fields accordingly. + // (not PDISC, not Originator) + SetLoginFields( pLoggedInPort, fchs, FALSE, FALSE); + + // send 'ACC' reply + cpqfcTSPutLinkQue( cpqfcHBAdata, + ELS_PLOGI_ACC, // (PDISC same as PLOGI ACC) + fchs ); + } + } + else // Payload unacceptable + { + printk("payload unacceptable\n"); + NeedReject = TRUE; // reject code already set + } + + if( NeedReject) + { + // The PDISC failed. Set login struct flags accordingly, + // terminate any I/O to this port, and Q a PLOGI + pLoggedInPort->pdisc = FALSE; + pLoggedInPort->prli = FALSE; + pLoggedInPort->plogi = FALSE; + + fchs->reserved = ls_reject_code; // borrow this (unused) field + + // send 'RJT' reply + cpqfcTSPutLinkQue( cpqfcHBAdata, ELS_RJT, fchs ); + } + + // terminate any exchanges with this device... + if( pLoggedInPort ) + { + cpqfcTSTerminateExchange( cpqfcHBAdata, + &pLoggedInPort->ScsiNexus, PORTID_CHANGED); + } + break; + + + + case 0x1020: // PRLI? + { + BOOLEAN NeedReject = TRUE; + pLoggedInPort = fcFindLoggedInPort( + fcChip, + NULL, // don't search Scsi Nexus + (fchs->s_id & 0xFFFFFF), // search linked list for port_id + NULL, // DON'T search linked list for WWN + NULL); // don't care + + if( pLoggedInPort == NULL ) + { + // huh? + printk(" Unexpected PRLI Request -not logged in!\n"); + + // set reject reason code + ls_reject_code = LS_RJT_REASON( PROTOCOL_ERROR, INITIATOR_CTL_ERROR); + + // Q a LOGOut here? + } + else + { + // verify the PRLI ACC payload + if( !verify_PRLI( fchs, &ls_reject_code) ) + { + // PRLI Reply is acceptable; were we expecting it? + if( pLoggedInPort->plogi ) + { + // yes, we expected the PRLI ACC (not PDISC; not Originator) + SetLoginFields( pLoggedInPort, fchs, FALSE, FALSE); + + // Q an ACCept Reply + cpqfcTSPutLinkQue( cpqfcHBAdata, + ELS_PRLI_ACC, + fchs ); + + NeedReject = FALSE; + } + else + { + // huh? + printk(" (unexpected) PRLI REQEST with plogi FALSE\n"); + + // set reject reason code + ls_reject_code = LS_RJT_REASON( PROTOCOL_ERROR, INITIATOR_CTL_ERROR); + + // Q a LOGOut here? + + } + } + else + { + printk(" PRLI REQUEST payload failed verify\n"); + // (reject code set by "verify") + + // Q a LOGOut here? + } + } + + if( NeedReject ) + { + // Q a ReJecT Reply with reason code + fchs->reserved = ls_reject_code; + cpqfcTSPutLinkQue( cpqfcHBAdata, + ELS_RJT, // Q Type + fchs ); + } + } + break; + + + + + case 0x0005: // LOGOut? + { + // was this LOGOUT because we sent a ELS_PDISC to an FC device + // with changed (or new) port_id, or does the port refuse + // to communicate to us? + // We maintain a logout counter - if we get 3 consecutive LOGOuts, + // give up! + LOGOUT_PAYLOAD logo; + BOOLEAN GiveUpOnDevice = FALSE; + ULONG ls_reject_code = 0; + + BigEndianSwap( (UCHAR*)&fchs->pl[0], (UCHAR*)&logo, sizeof(logo)); + + pLoggedInPort = fcFindLoggedInPort( + fcChip, + NULL, // don't search Scsi Nexus + 0, // don't search linked list for port_id + &logo.port_name[0], // search linked list for WWN + NULL); // don't care about end of list + + if( pLoggedInPort ) // found the device? + { + // Q an ACC reply + cpqfcTSPutLinkQue( cpqfcHBAdata, + ELS_LOGO_ACC, // Q Type + fchs ); // device to respond to + + // set login struct fields (LOGO_counter increment) + SetLoginFields( pLoggedInPort, fchs, FALSE, FALSE); + + // are we an Initiator? + if( fcChip->Options.initiator) + { + // we're an Initiator, so check if we should + // try (another?) login + + // Fabrics routinely log out from us after + // getting device info - don't try to log them + // back in. + if( (fchs->s_id & 0xFFF000) == 0xFFF000 ) + { + ; // do nothing + } + else if( pLoggedInPort->LOGO_counter <= 3) + { + // try (another) login (PLOGI request) + + cpqfcTSPutLinkQue( cpqfcHBAdata, + ELS_PLOGI, // Q Type + fchs ); + + // Terminate I/O with "retry" potential + cpqfcTSTerminateExchange( cpqfcHBAdata, + &pLoggedInPort->ScsiNexus, + PORTID_CHANGED); + } + else + { + printk(" Got 3 LOGOuts - terminating comm. with port_id %Xh\n", + fchs->s_id &&0xFFFFFF); + GiveUpOnDevice = TRUE; + } + } + else + { + GiveUpOnDevice = TRUE; + } + + + if( GiveUpOnDevice == TRUE ) + { + cpqfcTSTerminateExchange( cpqfcHBAdata, + &pLoggedInPort->ScsiNexus, + DEVICE_REMOVED); + } + } + else // we don't know this WWN! + { + // Q a ReJecT Reply with reason code + fchs->reserved = ls_reject_code; + cpqfcTSPutLinkQue( cpqfcHBAdata, + ELS_RJT, // Q Type + fchs ); + } + } + break; + + + + + // FABRIC only case + case 0x0461: // ELS RSCN (Registered State Change Notification)? + { + int Ports; + int i; + __u32 Buff; + // Typically, one or more devices have been added to or dropped + // from the Fabric. + // The format of this frame is defined in FC-FLA (Rev 2.7, Aug 1997) + // The first 32-bit word has a 2-byte Payload Length, which + // includes the 4 bytes of the first word. Consequently, + // this PL len must never be less than 4, must be a multiple of 4, + // and has a specified max value 256. + // (Endianess!) + Ports = ((fchs->pl[0] >>24) - 4) / 4; + Ports = Ports > 63 ? 63 : Ports; + + printk(" RSCN ports: %d\n", Ports); + if( Ports <= 0 ) // huh? + { + // ReJecT the command + fchs->reserved = LS_RJT_REASON( UNABLE_TO_PERFORM, 0); + + cpqfcTSPutLinkQue( cpqfcHBAdata, + ELS_RJT, // Q Type + fchs ); + + break; + } + else // Accept the command + { + cpqfcTSPutLinkQue( cpqfcHBAdata, + ELS_ACC, // Q Type + fchs ); + } + + // Check the "address format" to determine action. + // We have 3 cases: + // 0 = Port Address; 24-bit address of affected device + // 1 = Area Address; MS 16 bits valid + // 2 = Domain Address; MS 8 bits valid + for( i=0; ipl[i+1],(UCHAR*)&Buff, 4); + switch( Buff & 0xFF000000) + { + + case 0: // Port Address? + + case 0x01000000: // Area Domain? + case 0x02000000: // Domain Address + // For example, "port_id" 0x201300 + // OK, let's try a Name Service Request (Query) + fchs->s_id = 0xFFFFFC; // Name Server Address + cpqfcTSPutLinkQue( cpqfcHBAdata, FCS_NSR, fchs); + + break; + + + default: // huh? new value on version change? + break; + } + } + } + break; + + + + + default: // don't support this request (yet) + // set reject reason code + fchs->reserved = LS_RJT_REASON( UNABLE_TO_PERFORM, + REQUEST_NOT_SUPPORTED); + + cpqfcTSPutLinkQue( cpqfcHBAdata, + ELS_RJT, // Q Type + fchs ); + break; + } +} + + +static void ProcessELS_Reply( + CPQFCHBA* cpqfcHBAdata, TachFCHDR_GCMND* fchs) +{ + PTACHYON fcChip = &cpqfcHBAdata->fcChip; + FC_EXCHANGES *Exchanges = fcChip->Exchanges; + ULONG ox_id = (fchs->ox_rx_id >>16); + ULONG ls_reject_code; + PFC_LOGGEDIN_PORT pLoggedInPort, pLastLoggedInPort; + + // If this is a valid reply, then we MUST have sent a request. + // Verify that we can find a valid request OX_ID corresponding to + // this reply + + + if( Exchanges->fcExchange[(fchs->ox_rx_id >>16)].type == 0) + { + printk(" *Discarding ACC/RJT frame, xID %04X/%04X* ", + ox_id, fchs->ox_rx_id & 0xffff); + goto Quit; // exit this routine + } + + + // Is the reply a RJT (reject)? + if( (fchs->pl[0] & 0xFFFFL) == 0x01) // Reject reply? + { +// ****** REJECT REPLY ******** + switch( Exchanges->fcExchange[ox_id].type ) + { + + case ELS_FDISC: // we sent out Fabric Discovery + case ELS_FLOGI: // we sent out FLOGI + + printk("RJT received on Fabric Login from %Xh, reason %Xh\n", + fchs->s_id, fchs->pl[1]); + + break; + + default: + break; + } + + goto Done; + } + + // OK, we have an ACCept... + // What's the ACC type? (according to what we sent) + switch( Exchanges->fcExchange[ox_id].type ) + { + + case ELS_PLOGI: // we sent out PLOGI + if( !verify_PLOGI( fcChip, fchs, &ls_reject_code) ) + { + LOGIN_PAYLOAD logi; // FC-PH Port Login + + // login ACC payload acceptable; search for WWN in our list + // of fcPorts + + BigEndianSwap( (UCHAR*)&fchs->pl[0], (UCHAR*)&logi, sizeof(logi)); + + pLoggedInPort = fcFindLoggedInPort( + fcChip, + NULL, // don't search Scsi Nexus + 0, // don't search linked list for port_id + &logi.port_name[0], // search linked list for WWN + &pLastLoggedInPort); // must return non-NULL; when a port_id + // is not found, this pointer marks the + // end of the singly linked list + + if( pLoggedInPort == NULL) // WWN not found - new port + { + + pLoggedInPort = CreateFcPort( + cpqfcHBAdata, + pLastLoggedInPort, + fchs, + &logi); + + if( pLoggedInPort == NULL ) + { + printk(" cpqfcTS: New port allocation failed - lost FC device!\n"); + // Now Q a LOGOut Request, since we won't be talking to that device + + goto Done; // exit with error! dropped login frame + } + } + else // WWN was already known. Ensure that any open + // exchanges for this WWN are terminated. + // NOTE: It's possible that a device can change its + // 24-bit port_id after a Link init or Fabric change + // (e.g. LIP or Fabric RSCN). In that case, the old + // 24-bit port_id may be duplicated, or no longer exist. + { + + cpqfcTSTerminateExchange( cpqfcHBAdata, + &pLoggedInPort->ScsiNexus, PORTID_CHANGED); + } + + // We have an fcPort struct - set fields accordingly + // not PDISC, originator + SetLoginFields( pLoggedInPort, fchs, FALSE, TRUE); + + // We just set a "port_id"; is it duplicated? + TestDuplicatePortId( cpqfcHBAdata, pLoggedInPort); + + // For Fabric operation, we issued PLOGI to 0xFFFFFC + // so we can send SCR (State Change Registration) + // Check for this special case... + if( fchs->s_id == 0xFFFFFC ) + { + // PLOGI ACC was a Fabric response... issue SCR + fchs->s_id = 0xFFFFFD; // address for SCR + cpqfcTSPutLinkQue( cpqfcHBAdata, ELS_SCR, fchs); + } + + else + { + // Now we need a PRLI to enable FCP-SCSI operation + // set flags and Q up a ELS_PRLI + cpqfcTSPutLinkQue( cpqfcHBAdata, ELS_PRLI, fchs); + } + } + else + { + // login payload unacceptable - reason in ls_reject_code + // Q up a Logout Request + printk("Login Payload unacceptable\n"); + + } + break; + + + // PDISC logic very similar to PLOGI, except we never want + // to allocate mem for "new" port, and we set flags differently + // (might combine later with PLOGI logic for efficiency) + case ELS_PDISC: // we sent out PDISC + if( !verify_PLOGI( fcChip, fchs, &ls_reject_code) ) + { + LOGIN_PAYLOAD logi; // FC-PH Port Login + BOOLEAN NeedLogin = FALSE; + + // login payload acceptable; search for WWN in our list + // of (previously seen) fcPorts + + BigEndianSwap( (UCHAR*)&fchs->pl[0], (UCHAR*)&logi, sizeof(logi)); + + pLoggedInPort = fcFindLoggedInPort( + fcChip, + NULL, // don't search Scsi Nexus + 0, // don't search linked list for port_id + &logi.port_name[0], // search linked list for WWN + &pLastLoggedInPort); // must return non-NULL; when a port_id + // is not found, this pointer marks the + // end of the singly linked list + + if( pLoggedInPort != NULL) // WWN found? + { + // WWN has same port_id as last login? (Of course, a properly + // working FC device should NEVER ACCept a PDISC if it's + // port_id changed, but check just in case...) + if( (fchs->s_id & 0xFFFFFF) == pLoggedInPort->port_id) + { + // Yes. We were expecting PDISC? + if( pLoggedInPort->pdisc ) + { + int i; + + + // PDISC expected -- set fields. (PDISC, Originator) + SetLoginFields( pLoggedInPort, fchs, TRUE, TRUE); + + // We are ready to resume FCP-SCSI to this device... + // Do we need to start anything that was Queued? + + for( i=0; i< TACH_SEST_LEN; i++) + { + // see if any exchange for this PDISC'd port was queued + if( ((fchs->s_id &0xFFFFFF) == + (Exchanges->fcExchange[i].fchs.d_id & 0xFFFFFF)) + && + (Exchanges->fcExchange[i].status & EXCHANGE_QUEUED)) + { + fchs->reserved = i; // copy ExchangeID +// printk(" *Q x_ID %Xh after PDISC* ",i); + + cpqfcTSPutLinkQue( cpqfcHBAdata, EXCHANGE_QUEUED, fchs ); + } + } + + // Complete commands Q'd while we were waiting for Login + + UnblockScsiDevice( cpqfcHBAdata->HostAdapter, pLoggedInPort); + } + else + { + printk("Not expecting PDISC (pdisc=FALSE)\n"); + NeedLogin = TRUE; + } + } + else + { + printk("PDISC PortID change: old %Xh, new %Xh\n", + pLoggedInPort->port_id, fchs->s_id &0xFFFFFF); + NeedLogin = TRUE; + + } + } + else + { + printk("PDISC ACC from unknown WWN\n"); + NeedLogin = TRUE; + } + + if( NeedLogin) + { + + // The PDISC failed. Set login struct flags accordingly, + // terminate any I/O to this port, and Q a PLOGI + if( pLoggedInPort ) // FC device previously known? + { + + cpqfcTSPutLinkQue( cpqfcHBAdata, + ELS_LOGO, // Q Type + fchs ); // has port_id to send to + + // There are a variety of error scenarios which can result + // in PDISC failure, so as a catchall, add the check for + // duplicate port_id. + TestDuplicatePortId( cpqfcHBAdata, pLoggedInPort); + +// TriggerHBA( fcChip->Registers.ReMapMemBase, 0); + pLoggedInPort->pdisc = FALSE; + pLoggedInPort->prli = FALSE; + pLoggedInPort->plogi = FALSE; + + cpqfcTSTerminateExchange( cpqfcHBAdata, + &pLoggedInPort->ScsiNexus, PORTID_CHANGED); + } + cpqfcTSPutLinkQue( cpqfcHBAdata, ELS_PLOGI, fchs ); + } + } + else + { + // login payload unacceptable - reason in ls_reject_code + // Q up a Logout Request + printk("ERROR: Login Payload unacceptable!\n"); + + } + + break; + + + + case ELS_PRLI: // we sent out PRLI + + + pLoggedInPort = fcFindLoggedInPort( + fcChip, + NULL, // don't search Scsi Nexus + (fchs->s_id & 0xFFFFFF), // search linked list for port_id + NULL, // DON'T search linked list for WWN + NULL); // don't care + + if( pLoggedInPort == NULL ) + { + // huh? + printk(" Unexpected PRLI ACCept frame!\n"); + + // Q a LOGOut here? + + goto Done; + } + + // verify the PRLI ACC payload + if( !verify_PRLI( fchs, &ls_reject_code) ) + { + // PRLI Reply is acceptable; were we expecting it? + if( pLoggedInPort->plogi ) + { + // yes, we expected the PRLI ACC (not PDISC; Originator) + SetLoginFields( pLoggedInPort, fchs, FALSE, TRUE); + + // OK, let's send a REPORT_LUNS command to determine + // whether VSA or PDA FCP-LUN addressing is used. + + cpqfcTSPutLinkQue( cpqfcHBAdata, SCSI_REPORT_LUNS, fchs ); + + // It's possible that a device we were talking to changed + // port_id, and has logged back in. This function ensures + // that I/O will resume. + UnblockScsiDevice( cpqfcHBAdata->HostAdapter, pLoggedInPort); + + } + else + { + // huh? + printk(" (unexpected) PRLI ACCept with plogi FALSE\n"); + + // Q a LOGOut here? + goto Done; + } + } + else + { + printk(" PRLI ACCept payload failed verify\n"); + + // Q a LOGOut here? + } + + break; + + case ELS_FLOGI: // we sent out FLOGI (Fabric Login) + + // update the upper 16 bits of our port_id in Tachyon + // the switch adds those upper 16 bits when responding + // to us (i.e. we are the destination_id) + fcChip->Registers.my_al_pa = (fchs->d_id & 0xFFFFFF); + writel( fcChip->Registers.my_al_pa, + fcChip->Registers.ReMapMemBase + TL_MEM_TACH_My_ID); + + // now send out a PLOGI to the well known port_id 0xFFFFFC + fchs->s_id = 0xFFFFFC; + cpqfcTSPutLinkQue( cpqfcHBAdata, ELS_PLOGI, fchs); + + break; + + + case ELS_FDISC: // we sent out FDISC (Fabric Discovery (Login)) + + printk( " ELS_FDISC success "); + break; + + + case ELS_SCR: // we sent out State Change Registration + // now we can issue Name Service Request to find any + // Fabric-connected devices we might want to login to. + + + fchs->s_id = 0xFFFFFC; // Name Server Address + cpqfcTSPutLinkQue( cpqfcHBAdata, FCS_NSR, fchs); + + + break; + + + default: + printk(" *Discarding unknown ACC frame, xID %04X/%04X* ", + ox_id, fchs->ox_rx_id & 0xffff); + break; + } + + +Done: + // Regardless of whether the Reply is valid or not, the + // the exchange is done - complete + cpqfcTSCompleteExchange(cpqfcHBAdata->PciDev, fcChip, (fchs->ox_rx_id >>16)); + +Quit: + return; +} + + + + + + +// **************** Fibre Channel Services ************** +// This is where we process the Directory (Name) Service Reply +// to know which devices are on the Fabric + +static void ProcessFCS_Reply( + CPQFCHBA* cpqfcHBAdata, TachFCHDR_GCMND* fchs) +{ + PTACHYON fcChip = &cpqfcHBAdata->fcChip; + FC_EXCHANGES *Exchanges = fcChip->Exchanges; + ULONG ox_id = (fchs->ox_rx_id >>16); +// ULONG ls_reject_code; +// PFC_LOGGEDIN_PORT pLoggedInPort, pLastLoggedInPort; + + // If this is a valid reply, then we MUST have sent a request. + // Verify that we can find a valid request OX_ID corresponding to + // this reply + + if( Exchanges->fcExchange[(fchs->ox_rx_id >>16)].type == 0) + { + printk(" *Discarding Reply frame, xID %04X/%04X* ", + ox_id, fchs->ox_rx_id & 0xffff); + goto Quit; // exit this routine + } + + + // OK, we were expecting it. Now check to see if it's a + // "Name Service" Reply, and if so force a re-validation of + // Fabric device logins (i.e. Start the login timeout and + // send PDISC or PLOGI) + // (Endianess Byte Swap?) + if( fchs->pl[1] == 0x02FC ) // Name Service + { + // got a new (or NULL) list of Fabric attach devices... + // Invalidate current logins + + PFC_LOGGEDIN_PORT pLoggedInPort = &fcChip->fcPorts; + while( pLoggedInPort ) // for all ports which are expecting + // PDISC after the next LIP, set the + // logoutTimer + { + + if( (pLoggedInPort->port_id & 0xFFFF00) // Fabric device? + && + (pLoggedInPort->port_id != 0xFFFFFC) ) // NOT the F_Port + { + pLoggedInPort->LOGO_timer = 6; // what's the Fabric timeout?? + // suspend any I/O in progress until + // PDISC received... + pLoggedInPort->prli = FALSE; // block FCP-SCSI commands + } + + pLoggedInPort = pLoggedInPort->pNextPort; + } + + if( fchs->pl[2] == 0x0280) // ACCept? + { + // Send PLOGI or PDISC to these Fabric devices + SendLogins( cpqfcHBAdata, &fchs->pl[4] ); + } + + + // As of this writing, the only reason to reject is because NO + // devices are left on the Fabric. We already started + // "logged out" timers; if the device(s) don't come + // back, we'll do the implicit logout in the heart beat + // timer routine + else // ReJecT + { + // this just means no Fabric device is visible at this instant + } + } + + // Regardless of whether the Reply is valid or not, the + // the exchange is done - complete + cpqfcTSCompleteExchange(cpqfcHBAdata->PciDev, fcChip, (fchs->ox_rx_id >>16)); + +Quit: + return; +} + + + + + + + +static void AnalyzeIncomingFrame( + CPQFCHBA *cpqfcHBAdata, + ULONG QNdx ) +{ + PTACHYON fcChip = &cpqfcHBAdata->fcChip; + FC_EXCHANGES *Exchanges = fcChip->Exchanges; + PFC_LINK_QUE fcLQ = cpqfcHBAdata->fcLQ; + TachFCHDR_GCMND* fchs = + (TachFCHDR_GCMND*)fcLQ->Qitem[QNdx].ulBuff; +// ULONG ls_reject_code; // reason for rejecting login + LONG ExchangeID; +// FC_LOGGEDIN_PORT *pLoggedInPort; + BOOLEAN AbortAccept; + + ENTER("AnalyzeIncomingFrame"); + + + + switch( fcLQ->Qitem[QNdx].Type) // FCP or Unknown + { + + case SFQ_UNKNOWN: // unknown frame (e.g. LIP position frame, NOP, etc.) + + + // ********* FC-4 Device Data/ Fibre Channel Service ************* + if( ((fchs->d_id &0xF0000000) == 0) // R_CTL (upper nibble) 0x0? + && + (fchs->f_ctl & 0x20000000) ) // TYPE 20h is Fibre Channel Service + { + + // ************** FCS Reply ********************** + + if( (fchs->d_id & 0xff000000L) == 0x03000000L) // (31:23 R_CTL) + { + ProcessFCS_Reply( cpqfcHBAdata, fchs ); + + } // end of FCS logic + + } + + + // *********** Extended Link Service ************** + + else if( fchs->d_id & 0x20000000 // R_CTL 0x2? + && + (fchs->f_ctl & 0x01000000) ) // TYPE = 1 + { + + // these frames are either a response to + // something we sent (0x23) or "unsolicited" + // frames (0x22). + + + // **************Extended Link REPLY ********************** + // R_CTL Solicited Control Reply + + if( (fchs->d_id & 0xff000000L) == 0x23000000L) // (31:23 R_CTL) + { + + ProcessELS_Reply( cpqfcHBAdata, fchs ); + + } // end of "R_CTL Solicited Control Reply" + + + + + // **************Extended Link REQUEST ********************** + // (unsolicited commands from another port or task...) + + // R_CTL Ext Link REQUEST + else if( (fchs->d_id & 0xff000000L) == 0x22000000L && + (fchs->ox_rx_id != 0xFFFFFFFFL) ) // (ignore LIP frame) + { + + + + ProcessELS_Request( cpqfcHBAdata, fchs ); + + } + + + + // ************** LILP ********************** + else if( (fchs->d_id & 0xff000000L) == 0x22000000L && + (fchs->ox_rx_id == 0xFFFFFFFFL)) // (e.g., LIP frames) + + { + // SANMark specifies that when available, we must use + // the LILP frame to determine which ALPAs to send Port Discovery + // to... + + if( fchs->pl[0] == 0x0711L) // ELS_PLOGI? + { +// UCHAR *ptr = (UCHAR*)&fchs->pl[1]; +// printk(" %d ALPAs found\n", *ptr); + memcpy( fcChip->LILPmap, &fchs->pl[1], 32*4); // 32 DWORDs + fcChip->Options.LILPin = 1; // our LILPmap is valid! + // now post to make Port Discovery happen... + cpqfcTSPutLinkQue( cpqfcHBAdata, LINKACTIVE, fchs); + } + } + } + + + // ***************** BASIC LINK SERVICE ***************** + + else if( fchs->d_id & 0x80000000 // R_CTL: + && // Basic Link Service Request + !(fchs->f_ctl & 0xFF000000) ) // type=0 for BLS + { + + // Check for ABTS (Abort Sequence) + if( (fchs->d_id & 0x8F000000) == 0x81000000) + { + // look for OX_ID, S_ID pair that matches in our + // fcExchanges table; if found, reply with ACCept and complete + // the exchange + + // Per PLDA, an ABTS is sent by an initiator; therefore + // assume that if we have an exhange open to the port who + // sent ABTS, it will be the d_id of what we sent. + for( ExchangeID = 0, AbortAccept=FALSE; + ExchangeID < TACH_SEST_LEN; ExchangeID++) + { + // Valid "target" exchange 24-bit port_id matches? + // NOTE: For the case of handling Intiator AND Target + // functions on the same chip, we can have TWO Exchanges + // with the same OX_ID -- OX_ID/FFFF for the CMND, and + // OX_ID/RX_ID for the XRDY or DATA frame(s). Ideally, + // we would like to support ABTS from Initiators or Targets, + // but it's not clear that can be supported on Tachyon for + // all cases (requires more investigation). + + if( (Exchanges->fcExchange[ ExchangeID].type == SCSI_TWE || + Exchanges->fcExchange[ ExchangeID].type == SCSI_TRE) + && + ((Exchanges->fcExchange[ ExchangeID].fchs.d_id & 0xFFFFFF) == + (fchs->s_id & 0xFFFFFF)) ) + { + + // target xchnge port_id matches -- how about OX_ID? + if( (Exchanges->fcExchange[ ExchangeID].fchs.ox_rx_id &0xFFFF0000) + == (fchs->ox_rx_id & 0xFFFF0000) ) + // yes! post ACCept response; will be completed by fcStart + { + Exchanges->fcExchange[ ExchangeID].status = TARGET_ABORT; + + // copy (add) rx_id field for simplified ACCept reply + fchs->ox_rx_id = + Exchanges->fcExchange[ ExchangeID].fchs.ox_rx_id; + + cpqfcTSPutLinkQue( cpqfcHBAdata, + BLS_ABTS_ACC, // Q Type + fchs ); // void QueContent + AbortAccept = TRUE; + printk("ACCepting ABTS for x_ID %8.8Xh, SEST pair %8.8Xh\n", + fchs->ox_rx_id, Exchanges->fcExchange[ ExchangeID].fchs.ox_rx_id); + break; // ABTS can affect only ONE exchange -exit loop + } + } + } // end of FOR loop + if( !AbortAccept ) // can't ACCept ABTS - send Reject + { + printk("ReJecTing: can't find ExchangeID %8.8Xh for ABTS command\n", + fchs->ox_rx_id); + if( Exchanges->fcExchange[ ExchangeID].type + && + !(fcChip->SEST->u[ ExchangeID].IWE.Hdr_Len + & 0x80000000)) + { + cpqfcTSCompleteExchange( cpqfcHBAdata->PciDev, fcChip, ExchangeID); + } + else + { + printk("Unexpected ABTS ReJecT! SEST[%X] Dword 0: %Xh\n", + ExchangeID, fcChip->SEST->u[ ExchangeID].IWE.Hdr_Len); + } + } + } + + // Check for BLS {ABTS? (Abort Sequence)} ACCept + else if( (fchs->d_id & 0x8F000000) == 0x84000000) + { + // target has responded with ACC for our ABTS; + // complete the indicated exchange with ABORTED status + // Make no checks for correct RX_ID, since + // all we need to conform ABTS ACC is the OX_ID. + // Verify that the d_id matches! + + ExchangeID = (fchs->ox_rx_id >> 16) & 0x7FFF; // x_id from ACC +// printk("ABTS ACC x_ID 0x%04X 0x%04X, status %Xh\n", +// fchs->ox_rx_id >> 16, fchs->ox_rx_id & 0xffff, +// Exchanges->fcExchange[ExchangeID].status); + + + + if( ExchangeID < TACH_SEST_LEN ) // x_ID makes sense + { + // Does "target" exchange 24-bit port_id match? + // (See "NOTE" above for handling Intiator AND Target in + // the same device driver) + // First, if this is a target response, then we originated + // (initiated) it with BLS_ABTS: + + if( (Exchanges->fcExchange[ ExchangeID].type == BLS_ABTS) + + && + // Second, does the source of this ACC match the destination + // of who we originally sent it to? + ((Exchanges->fcExchange[ ExchangeID].fchs.d_id & 0xFFFFFF) == + (fchs->s_id & 0xFFFFFF)) ) + { + cpqfcTSCompleteExchange( cpqfcHBAdata->PciDev, fcChip, ExchangeID ); + } + } + } + // Check for BLS {ABTS? (Abort Sequence)} ReJecT + else if( (fchs->d_id & 0x8F000000) == 0x85000000) + { + // target has responded with RJT for our ABTS; + // complete the indicated exchange with ABORTED status + // Make no checks for correct RX_ID, since + // all we need to conform ABTS ACC is the OX_ID. + // Verify that the d_id matches! + + ExchangeID = (fchs->ox_rx_id >> 16) & 0x7FFF; // x_id from ACC +// printk("BLS_ABTS RJT on Exchange 0x%04X 0x%04X\n", +// fchs->ox_rx_id >> 16, fchs->ox_rx_id & 0xffff); + + if( ExchangeID < TACH_SEST_LEN ) // x_ID makes sense + { + // Does "target" exchange 24-bit port_id match? + // (See "NOTE" above for handling Intiator AND Target in + // the same device driver) + // First, if this is a target response, then we originated + // (initiated) it with BLS_ABTS: + + if( (Exchanges->fcExchange[ ExchangeID].type == BLS_ABTS) + + && + // Second, does the source of this ACC match the destination + // of who we originally sent it to? + ((Exchanges->fcExchange[ ExchangeID].fchs.d_id & 0xFFFFFF) == + (fchs->s_id & 0xFFFFFF)) ) + { + // YES! NOTE: There is a bug in CPQ's RA-4000 box + // where the "reason code" isn't returned in the payload + // For now, simply presume the reject is because the target + // already completed the exchange... + +// printk("complete x_ID %Xh on ABTS RJT\n", ExchangeID); + cpqfcTSCompleteExchange( cpqfcHBAdata->PciDev, fcChip, ExchangeID ); + } + } + } // end of ABTS check + } // end of Basic Link Service Request + break; + + default: + printk("AnalyzeIncomingFrame: unknown type: %Xh(%d)\n", + fcLQ->Qitem[QNdx].Type, + fcLQ->Qitem[QNdx].Type); + break; + } +} + + +// Function for Port Discovery necessary after every FC +// initialization (e.g. LIP). +// Also may be called if from Fabric Name Service logic. + +static void SendLogins( CPQFCHBA *cpqfcHBAdata, __u32 *FabricPortIds ) +{ + PTACHYON fcChip = &cpqfcHBAdata->fcChip; + FC_EXCHANGES *Exchanges = fcChip->Exchanges; + ULONG ulStatus=0; + TachFCHDR_GCMND fchs; // copy fields for transmission + int i; + ULONG loginType; + LONG ExchangeID; + PFC_LOGGEDIN_PORT pLoggedInPort; + __u32 PortIds[ number_of_al_pa]; + int NumberOfPorts=0; + + // We're going to presume (for now) that our limit of Fabric devices + // is the same as the number of alpa on a private loop (126 devices). + // (Of course this could be changed to support however many we have + // memory for). + memset( &PortIds[0], 0, sizeof(PortIds)); + + // First, check if this login is for our own Link Initialization + // (e.g. LIP on FC-AL), or if we have knowledge of Fabric devices + // from a switch. If we are logging into Fabric devices, we'll + // have a non-NULL FabricPortId pointer + + if( FabricPortIds != NULL) // may need logins + { + int LastPort=FALSE; + i = 0; + while( !LastPort) + { + // port IDs From NSR payload; byte swap needed? + BigEndianSwap( (UCHAR*)FabricPortIds, (UCHAR*)&PortIds[i], 4); + +// printk("FPortId[%d] %Xh ", i, PortIds[i]); + if( PortIds[i] & 0x80000000) + LastPort = TRUE; + + PortIds[i] &= 0xFFFFFF; // get 24-bit port_id + // some non-Fabric devices (like the Crossroads Fibre/Scsi bridge) + // erroneously use ALPA 0. + if( PortIds[i] ) // need non-zero port_id... + i++; + + if( i >= number_of_al_pa ) // (in)sanity check + break; + FabricPortIds++; // next... + } + + NumberOfPorts = i; +// printk("NumberOf Fabric ports %d", NumberOfPorts); + } + + else // need to send logins on our "local" link + { + + // are we a loop port? If so, check for reception of LILP frame, + // and if received use it (SANMark requirement) + if( fcChip->Options.LILPin ) + { + int j=0; + // sanity check on number of ALPAs from LILP frame... + // For format of LILP frame, see FC-AL specs or + // "Fibre Channel Bench Reference", J. Stai, 1995 (ISBN 1-879936-17-8) + // First byte is number of ALPAs + i = fcChip->LILPmap[0] >= (32*4) ? 32*4 : fcChip->LILPmap[0]; + NumberOfPorts = i; +// printk(" LILP alpa count %d ", i); + while( i > 0) + { + PortIds[j] = fcChip->LILPmap[1+ j]; + j++; i--; + } + } + else // have to send login to everybody + { + int j=0; + i = number_of_al_pa; + NumberOfPorts = i; + while( i > 0) + { + PortIds[j] = valid_al_pa[j]; // all legal ALPAs + j++; i--; + } + } + } + + + // Now we have a copy of the port_ids (and how many)... + for( i = 0; i < NumberOfPorts; i++) + { + // 24-bit FC Port ID + fchs.s_id = PortIds[i]; // note: only 8-bits used for ALPA + + + // don't log into ourselves (Linux Scsi disk scan will stop on + // no TARGET support error on us, and quit trying for rest of devices) + if( (fchs.s_id & 0xFF ) == (fcChip->Registers.my_al_pa & 0xFF) ) + continue; + + // fabric login needed? + if( (fchs.s_id == 0) || + (fcChip->Options.fabric == 1) ) + { + fcChip->Options.flogi = 1; // fabric needs longer for login + // Do we need FLOGI or FDISC? + pLoggedInPort = fcFindLoggedInPort( + fcChip, + NULL, // don't search SCSI Nexus + 0xFFFFFC, // search linked list for Fabric port_id + NULL, // don't search WWN + NULL); // (don't care about end of list) + + if( pLoggedInPort ) // If found, we have prior experience with + // this port -- check whether PDISC is needed + { + if( pLoggedInPort->flogi ) + { + // does the switch support FDISC?? (FLOGI for now...) + loginType = ELS_FLOGI; // prior FLOGI still valid + } + else + loginType = ELS_FLOGI; // expired FLOGI + } + else // first FLOGI? + loginType = ELS_FLOGI; + + + fchs.s_id = 0xFFFFFE; // well known F_Port address + + // Fabrics are not required to support FDISC, and + // it's not clear if that helps us anyway, since + // we'll want a Name Service Request to re-verify + // visible devices... + // Consequently, we always want our upper 16 bit + // port_id to be zero (we'll be rejected if we + // use our prior port_id if we've been plugged into + // a different switch port). + // Trick Tachyon to send to ALPA 0 (see TL/TS UG, pg 87) + // If our ALPA is 55h for instance, we want the FC frame + // s_id to be 0x000055, while Tach's my_al_pa register + // must be 0x000155, to force an OPN at ALPA 0 + // (the Fabric port) + fcChip->Registers.my_al_pa &= 0xFF; // only use ALPA for FLOGI + writel( fcChip->Registers.my_al_pa | 0x0100, + fcChip->Registers.ReMapMemBase + TL_MEM_TACH_My_ID); + } + + else // not FLOGI... + { + // should we send PLOGI or PDISC? Check if any prior port_id + // (e.g. alpa) completed a PLOGI/PRLI exchange by checking + // the pdisc flag. + + pLoggedInPort = fcFindLoggedInPort( + fcChip, + NULL, // don't search SCSI Nexus + fchs.s_id, // search linked list for al_pa + NULL, // don't search WWN + NULL); // (don't care about end of list) + + + + if( pLoggedInPort ) // If found, we have prior experience with + // this port -- check whether PDISC is needed + { + if( pLoggedInPort->pdisc ) + { + loginType = ELS_PDISC; // prior PLOGI and PRLI maybe still valid + + } + else + loginType = ELS_PLOGI; // prior knowledge, but can't use PDISC + } + else // never talked to this port_id before + loginType = ELS_PLOGI; // prior knowledge, but can't use PDISC + } + + + + ulStatus = cpqfcTSBuildExchange( + cpqfcHBAdata, + loginType, // e.g. PLOGI + &fchs, // no incoming frame (we are originator) + NULL, // no data (no scatter/gather list) + &ExchangeID );// fcController->fcExchanges index, -1 if failed + + if( !ulStatus ) // Exchange setup OK? + { + ulStatus = cpqfcTSStartExchange( cpqfcHBAdata, ExchangeID ); + if( !ulStatus ) + { + // submitted to Tach's Outbound Que (ERQ PI incremented) + // waited for completion for ELS type (Login frames issued + // synchronously) + + if( loginType == ELS_PDISC ) + { + // now, we really shouldn't Revalidate SEST exchanges until + // we get an ACC reply from our target and verify that + // the target address/WWN is unchanged. However, when a fast + // target gets the PDISC, they can send SEST Exchange data + // before we even get around to processing the PDISC ACC. + // Consequently, we lose the I/O. + // To avoid this, go ahead and Revalidate when the PDISC goes + // out, anticipating that the ACC will be truly acceptable + // (this happens 99.9999....% of the time). + // If we revalidate a SEST write, and write data goes to a + // target that is NOT the one we originated the WRITE to, + // that target is required (FCP-SCSI specs, etc) to discard + // our WRITE data. + + // Re-validate SEST entries (Tachyon hardware assists) + RevalidateSEST( cpqfcHBAdata->HostAdapter, pLoggedInPort); + //TriggerHBA( fcChip->Registers.ReMapMemBase, 1); + } + } + else // give up immediately on error + { +#ifdef LOGIN_DBG + printk("SendLogins: fcStartExchange failed: %Xh\n", ulStatus ); +#endif + break; + } + + + if( fcChip->Registers.FMstatus.value & 0x080 ) // LDn during Port Disc. + { + ulStatus = LNKDWN_OSLS; +#ifdef LOGIN_DBG + printk("SendLogins: PortDisc aborted (LDn) @alpa %Xh\n", fchs.s_id); +#endif + break; + } + // Check the exchange for bad status (i.e. FrameTimeOut), + // and complete on bad status (most likely due to BAD_ALPA) + // on LDn, DPC function may already complete (ABORT) a started + // exchange, so check type first (type = 0 on complete). + if( Exchanges->fcExchange[ExchangeID].status ) + { +#ifdef LOGIN_DBG + printk("completing x_ID %X on status %Xh\n", + ExchangeID, Exchanges->fcExchange[ExchangeID].status); +#endif + cpqfcTSCompleteExchange( cpqfcHBAdata->PciDev, fcChip, ExchangeID); + } + } + else // Xchange setup failed... + { +#ifdef LOGIN_DBG + printk("FC: cpqfcTSBuildExchange failed: %Xh\n", ulStatus ); +#endif + break; + } + } + if( !ulStatus ) + { + // set the event signifying that all ALPAs were sent out. +#ifdef LOGIN_DBG + printk("SendLogins: PortDiscDone\n"); +#endif + cpqfcHBAdata->PortDiscDone = 1; + + + // TL/TS UG, pg. 184 + // 0x0065 = 100ms for RT_TOV + // 0x01f5 = 500ms for ED_TOV + fcChip->Registers.ed_tov.value = 0x006501f5L; + writel( fcChip->Registers.ed_tov.value, + (fcChip->Registers.ed_tov.address)); + + // set the LP_TOV back to ED_TOV (i.e. 500 ms) + writel( 0x00000010, fcChip->Registers.ReMapMemBase +TL_MEM_FM_TIMEOUT2); + } + else + { + printk("SendLogins: failed at xchng %Xh, alpa %Xh, status %Xh\n", + ExchangeID, fchs.s_id, ulStatus); + } + LEAVE("SendLogins"); + +} + + +// for REPORT_LUNS documentation, see "In-Depth Exploration of Scsi", +// D. Deming, 1994, pg 7-19 (ISBN 1-879936-08-9) +static void ScsiReportLunsDone(Scsi_Cmnd *Cmnd) +{ + struct Scsi_Host *HostAdapter = Cmnd->device->host; + CPQFCHBA *cpqfcHBAdata = (CPQFCHBA *)HostAdapter->hostdata; + PTACHYON fcChip = &cpqfcHBAdata->fcChip; + FC_EXCHANGES *Exchanges = fcChip->Exchanges; + PFC_LOGGEDIN_PORT pLoggedInPort; + int LunListLen=0; + int i; + ULONG x_ID = 0xFFFFFFFF; + UCHAR *ucBuff = Cmnd->request_buffer; + +// printk("cpqfcTS: ReportLunsDone \n"); + // first, we need to find the Exchange for this command, + // so we can find the fcPort struct to make the indicated + // changes. + for( i=0; i< TACH_SEST_LEN; i++) + { + if( Exchanges->fcExchange[i].type // exchange defined? + && + (Exchanges->fcExchange[i].Cmnd == Cmnd) ) // matches? + + { + x_ID = i; // found exchange! + break; + } + } + if( x_ID == 0xFFFFFFFF) + { +// printk("cpqfcTS: ReportLuns failed - no FC Exchange\n"); + goto Done; // Report Luns FC Exchange gone; + // exchange probably Terminated by Implicit logout + } + + + // search linked list for the port_id we sent INQUIRY to + pLoggedInPort = fcFindLoggedInPort( fcChip, + NULL, // DON'T search Scsi Nexus (we will set it) + Exchanges->fcExchange[ x_ID].fchs.d_id & 0xFFFFFF, + NULL, // DON'T search linked list for FC WWN + NULL); // DON'T care about end of list + + if( !pLoggedInPort ) + { +// printk("cpqfcTS: ReportLuns failed - device gone\n"); + goto Done; // error! can't find logged in Port + } + LunListLen = ucBuff[3]; + LunListLen += ucBuff[2]>>8; + + if( !LunListLen ) // failed + { + // generically speaking, a soft error means we should retry... + if( (Cmnd->result >> 16) == DID_SOFT_ERROR ) + { + if( ((Cmnd->sense_buffer[2] & 0xF) == 0x6) && + (Cmnd->sense_buffer[12] == 0x29) ) // Sense Code "reset" + { + TachFCHDR_GCMND *fchs = &Exchanges->fcExchange[ x_ID].fchs; + // did we fail because of "check condition, device reset?" + // e.g. the device was reset (i.e., at every power up) + // retry the Report Luns + + // who are we sending it to? + // we know this because we have a copy of the command + // frame from the original Report Lun command - + // switch the d_id/s_id fields, because the Exchange Build + // context is "reply to source". + + fchs->s_id = fchs->d_id; // (temporarily re-use the struct) + cpqfcTSPutLinkQue( cpqfcHBAdata, SCSI_REPORT_LUNS, fchs ); + } + } + else // probably, the device doesn't support Report Luns + pLoggedInPort->ScsiNexus.VolumeSetAddressing = 0; + } + else // we have LUN info - check VSA mode + { + // for now, assume all LUNs will have same addr mode + // for VSA, payload byte 8 will be 0x40; otherwise, 0 + pLoggedInPort->ScsiNexus.VolumeSetAddressing = ucBuff[8]; + + // Since we got a Report Luns answer, set lun masking flag + pLoggedInPort->ScsiNexus.LunMasking = 1; + + if( LunListLen > 8*CPQFCTS_MAX_LUN) // We expect CPQFCTS_MAX_LUN max + LunListLen = 8*CPQFCTS_MAX_LUN; + +/* + printk("Device WWN %08X%08X Reports Luns @: ", + (ULONG)(pLoggedInPort->u.liWWN &0xFFFFFFFF), + (ULONG)(pLoggedInPort->u.liWWN>>32)); + + for( i=8; iScsiNexus.lun[j] != 0xFF ) + { + AppendLunList = 1; + break; + } + } + if( AppendLunList ) + { + int k; + int FreeLunIndex; +// printk("cpqfcTS: AppendLunList\n"); + + // If we get a new Report Luns, we cannot change + // any existing LUN mapping! (Only additive entry) + // For all LUNs in ReportLun list + // if RL lun != ScsiNexus lun + // if RL lun present in ScsiNexus lun[], continue + // else find ScsiNexus lun[]==FF and add, continue + + for( i=8, j=0; iScsiNexus.lun[j] != ucBuff[i+1] ) + { + // something changed from the last Report Luns + printk(" cpqfcTS: Report Lun change!\n"); + for( k=0, FreeLunIndex=CPQFCTS_MAX_LUN; + k < CPQFCTS_MAX_LUN; k++) + { + if( pLoggedInPort->ScsiNexus.lun[k] == 0xFF) + { + FreeLunIndex = k; + break; + } + if( pLoggedInPort->ScsiNexus.lun[k] == ucBuff[i+1] ) + break; // we already masked this lun + } + if( k >= CPQFCTS_MAX_LUN ) + { + printk(" no room for new LUN %d\n", ucBuff[i+1]); + } + else if( k == FreeLunIndex ) // need to add LUN + { + pLoggedInPort->ScsiNexus.lun[k] = ucBuff[i+1]; +// printk("add [%d]->%02d\n", k, pLoggedInPort->ScsiNexus.lun[k]); + + } + else + { + // lun already known + } + break; + } + } + // print out the new list... + for( j=0; j< CPQFCTS_MAX_LUN; j++) + { + if( pLoggedInPort->ScsiNexus.lun[j] == 0xFF) + break; // done +// printk("[%d]->%02d ", j, pLoggedInPort->ScsiNexus.lun[j]); + } + } + else + { +// printk("Linux SCSI LUNs[] -> Device LUNs: "); + // first time - this is easy + for( i=8, j=0; iScsiNexus.lun[j] = ucBuff[i+1]; +// printk("[%d]->%02d ", j, pLoggedInPort->ScsiNexus.lun[j]); + } +// printk("\n"); + } + } + } + +Done: ; +} + +extern int is_private_data_of_cpqfc(CPQFCHBA *hba, void * pointer); +extern void cpqfc_free_private_data(CPQFCHBA *hba, cpqfc_passthru_private_t *data); + +static void +call_scsi_done(Scsi_Cmnd *Cmnd) +{ + CPQFCHBA *hba; + hba = (CPQFCHBA *) Cmnd->device->host->hostdata; + // Was this command a cpqfc passthru ioctl ? + if (Cmnd->sc_request != NULL && Cmnd->device->host != NULL && + Cmnd->device->host->hostdata != NULL && + is_private_data_of_cpqfc((CPQFCHBA *) Cmnd->device->host->hostdata, + Cmnd->sc_request->upper_private_data)) { + cpqfc_free_private_data(hba, + Cmnd->sc_request->upper_private_data); + Cmnd->sc_request->upper_private_data = NULL; + Cmnd->result &= 0xff00ffff; + Cmnd->result |= (DID_PASSTHROUGH << 16); // prevents retry + } + if (Cmnd->scsi_done != NULL) + (*Cmnd->scsi_done)(Cmnd); +} + +// After successfully getting a "Process Login" (PRLI) from an +// FC port, we want to Discover the LUNs so that we know the +// addressing type (e.g., FCP-SCSI Volume Set Address, Peripheral +// Unit Device), and whether SSP (Selective Storage Presentation or +// Lun Masking) has made the LUN numbers non-zero based or +// non-contiguous. To remain backward compatible with the SCSI-2 +// driver model, which expects a contiguous LUNs starting at 0, +// will use the ReportLuns info to map from "device" to "Linux" +// LUNs. +static void IssueReportLunsCommand( + CPQFCHBA* cpqfcHBAdata, + TachFCHDR_GCMND* fchs) +{ + PTACHYON fcChip = &cpqfcHBAdata->fcChip; + PFC_LOGGEDIN_PORT pLoggedInPort; + struct scsi_cmnd *Cmnd = NULL; + struct scsi_device *ScsiDev = NULL; + LONG x_ID; + ULONG ulStatus; + UCHAR *ucBuff; + + if( !cpqfcHBAdata->PortDiscDone) // cleared by LDn + { + printk("Discard Q'd ReportLun command\n"); + goto Done; + } + + // find the device (from port_id) we're talking to + pLoggedInPort = fcFindLoggedInPort( fcChip, + NULL, // DON'T search Scsi Nexus + fchs->s_id & 0xFFFFFF, + NULL, // DON'T search linked list for FC WWN + NULL); // DON'T care about end of list + if( pLoggedInPort ) // we'd BETTER find it! + { + + + if( !(pLoggedInPort->fcp_info & TARGET_FUNCTION) ) + goto Done; // forget it - FC device not a "target" + + + ScsiDev = scsi_get_host_dev (cpqfcHBAdata->HostAdapter); + if (!ScsiDev) + goto Done; + + Cmnd = scsi_get_command (ScsiDev, GFP_KERNEL); + if (!Cmnd) + goto Done; + + ucBuff = pLoggedInPort->ReportLunsPayload; + + memset( ucBuff, 0, REPORT_LUNS_PL); + + Cmnd->scsi_done = ScsiReportLunsDone; + + Cmnd->request_buffer = pLoggedInPort->ReportLunsPayload; + Cmnd->request_bufflen = REPORT_LUNS_PL; + + Cmnd->cmnd[0] = 0xA0; + Cmnd->cmnd[8] = REPORT_LUNS_PL >> 8; + Cmnd->cmnd[9] = (UCHAR)REPORT_LUNS_PL; + Cmnd->cmd_len = 12; + + Cmnd->device->channel = pLoggedInPort->ScsiNexus.channel; + Cmnd->device->id = pLoggedInPort->ScsiNexus.target; + + + ulStatus = cpqfcTSBuildExchange( + cpqfcHBAdata, + SCSI_IRE, + fchs, + Cmnd, // buffer for Report Lun data + &x_ID );// fcController->fcExchanges index, -1 if failed + + if( !ulStatus ) // Exchange setup? + { + ulStatus = cpqfcTSStartExchange( cpqfcHBAdata, x_ID ); + if( !ulStatus ) + { + // submitted to Tach's Outbound Que (ERQ PI incremented) + // waited for completion for ELS type (Login frames issued + // synchronously) + } + else + // check reason for Exchange not being started - we might + // want to Queue and start later, or fail with error + { + + } + } + + else // Xchange setup failed... + printk(" cpqfcTSBuildExchange failed: %Xh\n", ulStatus ); + } + else // like, we just got a PRLI ACC, and now the port is gone? + { + printk(" can't send ReportLuns - no login for port_id %Xh\n", + fchs->s_id & 0xFFFFFF); + } + + + +Done: + + if (Cmnd) + scsi_put_command (Cmnd); + if (ScsiDev) + scsi_free_host_dev (ScsiDev); +} + + + + + + + +static void CompleteBoardLockCmnd( CPQFCHBA *cpqfcHBAdata) +{ + int i; + for( i = CPQFCTS_REQ_QUEUE_LEN-1; i>= 0; i--) + { + if( cpqfcHBAdata->BoardLockCmnd[i] != NULL ) + { + Scsi_Cmnd *Cmnd = cpqfcHBAdata->BoardLockCmnd[i]; + cpqfcHBAdata->BoardLockCmnd[i] = NULL; + Cmnd->result = (DID_SOFT_ERROR << 16); // ask for retry +// printk(" BoardLockCmnd[%d] %p Complete, chnl/target/lun %d/%d/%d\n", +// i,Cmnd, Cmnd->channel, Cmnd->target, Cmnd->lun); + call_scsi_done(Cmnd); + } + } +} + + + + + + +// runs every 1 second for FC exchange timeouts and implicit FC device logouts + +void cpqfcTSheartbeat( unsigned long ptr ) +{ + CPQFCHBA *cpqfcHBAdata = (CPQFCHBA *)ptr; + PTACHYON fcChip = &cpqfcHBAdata->fcChip; + FC_EXCHANGES *Exchanges = fcChip->Exchanges; + PFC_LOGGEDIN_PORT pLoggedInPort = &fcChip->fcPorts; + ULONG i; + unsigned long flags; + DECLARE_MUTEX_LOCKED(BoardLock); + + PCI_TRACE( 0xA8) + + if( cpqfcHBAdata->BoardLock) // Worker Task Running? + goto Skip; + + // STOP _que function + spin_lock_irqsave( cpqfcHBAdata->HostAdapter->host_lock, flags); + + PCI_TRACE( 0xA8) + + + cpqfcHBAdata->BoardLock = &BoardLock; // stop Linux SCSI command queuing + + // release the IO lock (and re-enable interrupts) + spin_unlock_irqrestore( cpqfcHBAdata->HostAdapter->host_lock, flags); + + // Ensure no contention from _quecommand or Worker process + CPQ_SPINLOCK_HBA( cpqfcHBAdata) + + PCI_TRACE( 0xA8) + + + disable_irq( cpqfcHBAdata->HostAdapter->irq); // our IRQ + + // Complete the "bad target" commands (normally only used during + // initialization, since we aren't supposed to call "scsi_done" + // inside the queuecommand() function). (this is overly contorted, + // scsi_done can be safely called from queuecommand for + // this bad target case. May want to simplify this later) + + for( i=0; i< CPQFCTS_MAX_TARGET_ID; i++) + { + if( cpqfcHBAdata->BadTargetCmnd[i] ) + { + Scsi_Cmnd *Cmnd = cpqfcHBAdata->BadTargetCmnd[i]; + cpqfcHBAdata->BadTargetCmnd[i] = NULL; + Cmnd->result = (DID_BAD_TARGET << 16); + call_scsi_done(Cmnd); + } + else + break; + } + + + // logged in ports -- re-login check (ports required to verify login with + // PDISC after LIP within 2 secs) + + // prevent contention + while( pLoggedInPort ) // for all ports which are expecting + // PDISC after the next LIP, check to see if + // time is up! + { + // Important: we only detect "timeout" condition on TRANSITION + // from non-zero to zero + if( pLoggedInPort->LOGO_timer ) // time-out "armed"? + { + if( !(--pLoggedInPort->LOGO_timer) ) // DEC from 1 to 0? + { + // LOGOUT time! Per PLDA, PDISC hasn't complete in 2 secs, so + // issue LOGO request and destroy all I/O with other FC port(s). + +/* + printk(" ~cpqfcTS heartbeat: LOGOut!~ "); + printk("Linux SCSI Chanl/Target %d/%d (port_id %06Xh) WWN %08X%08X\n", + pLoggedInPort->ScsiNexus.channel, + pLoggedInPort->ScsiNexus.target, + pLoggedInPort->port_id, + (ULONG)(pLoggedInPort->u.liWWN &0xFFFFFFFF), + (ULONG)(pLoggedInPort->u.liWWN>>32)); + +*/ + cpqfcTSImplicitLogout( cpqfcHBAdata, pLoggedInPort); + + } + // else simply decremented - maybe next time... + } + pLoggedInPort = pLoggedInPort->pNextPort; + } + + + + + + // ************ FC EXCHANGE TIMEOUT CHECK ************** + + for( i=0; i< TACH_MAX_XID; i++) + { + if( Exchanges->fcExchange[i].type ) // exchange defined? + { + + if( !Exchanges->fcExchange[i].timeOut ) // time expired + { + // Set Exchange timeout status + Exchanges->fcExchange[i].status |= FC2_TIMEOUT; + + if( i >= TACH_SEST_LEN ) // Link Service Exchange + { + cpqfcTSCompleteExchange( cpqfcHBAdata->PciDev, fcChip, i); // Don't "abort" LinkService + } + + else // SEST Exchange TO -- may post ABTS to Worker Thread Que + { + // (Make sure we don't keep timing it out; let other functions + // complete it or set the timeOut as needed) + Exchanges->fcExchange[i].timeOut = 30000; // seconds default + + if( Exchanges->fcExchange[i].type + & + (BLS_ABTS | BLS_ABTS_ACC ) ) + { + // For BLS_ABTS*, an upper level might still have + // an outstanding command waiting for low-level completion. + // Also, in the case of a WRITE, we MUST get confirmation + // of either ABTS ACC or RJT before re-using the Exchange. + // It's possible that the RAID cache algorithm can hang + // if we fail to complete a WRITE to a LBA, when a READ + // comes later to that same LBA. Therefore, we must + // ensure that the target verifies receipt of ABTS for + // the exchange + + printk("~TO Q'd ABTS (x_ID %Xh)~ ", i); +// TriggerHBA( fcChip->Registers.ReMapMemBase); + + // On timeout of a ABTS exchange, check to + // see if the FC device has a current valid login. + // If so, restart it. + pLoggedInPort = fcFindLoggedInPort( fcChip, + Exchanges->fcExchange[i].Cmnd, // find Scsi Nexus + 0, // DON'T search linked list for FC port id + NULL, // DON'T search linked list for FC WWN + NULL); // DON'T care about end of list + + // device exists? + if( pLoggedInPort ) // device exists? + { + if( pLoggedInPort->prli ) // logged in for FCP-SCSI? + { + // attempt to restart the ABTS + printk(" ~restarting ABTS~ "); + cpqfcTSStartExchange( cpqfcHBAdata, i ); + + } + } + } + else // not an ABTS + { + + // We expect the WorkerThread to change the xchng type to + // abort and set appropriate timeout. + cpqfcTSPutLinkQue( cpqfcHBAdata, BLS_ABTS, &i ); // timed-out + } + } + } + else // time not expired... + { + // decrement timeout: 1 or more seconds left + --Exchanges->fcExchange[i].timeOut; + } + } + } + + + enable_irq( cpqfcHBAdata->HostAdapter->irq); + + + CPQ_SPINUNLOCK_HBA( cpqfcHBAdata) + + cpqfcHBAdata->BoardLock = NULL; // Linux SCSI commands may be queued + + // Now, complete any Cmnd we Q'd up while BoardLock was held + + CompleteBoardLockCmnd( cpqfcHBAdata); + + + // restart the timer to run again (1 sec later) +Skip: + mod_timer( &cpqfcHBAdata->cpqfcTStimer, jiffies + HZ); + + PCI_TRACEO( i, 0xA8) + return; +} + + +// put valid FC-AL physical address in spec order +static const UCHAR valid_al_pa[]={ + 0xef, 0xe8, 0xe4, 0xe2, + 0xe1, 0xE0, 0xDC, 0xDA, + 0xD9, 0xD6, 0xD5, 0xD4, + 0xD3, 0xD2, 0xD1, 0xCe, + 0xCd, 0xCc, 0xCb, 0xCa, + 0xC9, 0xC7, 0xC6, 0xC5, + 0xC3, 0xBc, 0xBa, 0xB9, + 0xB6, 0xB5, 0xB4, 0xB3, + 0xB2, 0xB1, 0xae, 0xad, + 0xAc, 0xAb, 0xAa, 0xA9, + + 0xA7, 0xA6, 0xA5, 0xA3, + 0x9f, 0x9e, 0x9d, 0x9b, + 0x98, 0x97, 0x90, 0x8f, + 0x88, 0x84, 0x82, 0x81, + 0x80, 0x7c, 0x7a, 0x79, + 0x76, 0x75, 0x74, 0x73, + 0x72, 0x71, 0x6e, 0x6d, + 0x6c, 0x6b, 0x6a, 0x69, + 0x67, 0x66, 0x65, 0x63, + 0x5c, 0x5a, 0x59, 0x56, + + 0x55, 0x54, 0x53, 0x52, + 0x51, 0x4e, 0x4d, 0x4c, + 0x4b, 0x4a, 0x49, 0x47, + 0x46, 0x45, 0x43, 0x3c, + 0x3a, 0x39, 0x36, 0x35, + 0x34, 0x33, 0x32, 0x31, + 0x2e, 0x2d, 0x2c, 0x2b, + 0x2a, 0x29, 0x27, 0x26, + 0x25, 0x23, 0x1f, 0x1E, + 0x1d, 0x1b, 0x18, 0x17, + + 0x10, 0x0f, 8, 4, 2, 1 }; // ALPA 0 (Fabric) is special case + +const int number_of_al_pa = (sizeof(valid_al_pa) ); + + + +// this function looks up an al_pa from the table of valid al_pa's +// we decrement from the last decimal loop ID, because soft al_pa +// (our typical case) are assigned with highest priority (and high al_pa) +// first. See "In-Depth FC-AL", R. Kembel pg. 38 +// INPUTS: +// al_pa - 24 bit port identifier (8 bit al_pa on private loop) +// RETURN: +// Loop ID - serves are index to array of logged in ports +// -1 - invalid al_pa (not all 8 bit values are legal) + +#if (0) +static int GetLoopID( ULONG al_pa ) +{ + int i; + + for( i = number_of_al_pa -1; i >= 0; i--) // dec. + { + if( valid_al_pa[i] == (UCHAR)al_pa ) // take lowest 8 bits + return i; // success - found valid al_pa; return decimal LoopID + } + return -1; // failed - not found +} +#endif + +extern cpqfc_passthru_private_t *cpqfc_private(Scsi_Request *sr); + +// Search the singly (forward) linked list "fcPorts" looking for +// either the SCSI target (if != -1), port_id (if not NULL), +// or WWN (if not null), in that specific order. +// If we find a SCSI nexus (from Cmnd arg), set the SCp.phase +// field according to VSA or PDU +// RETURNS: +// Ptr to logged in port struct if found +// (NULL if not found) +// pLastLoggedInPort - ptr to last struct (for adding new ones) +// +PFC_LOGGEDIN_PORT fcFindLoggedInPort( + PTACHYON fcChip, + Scsi_Cmnd *Cmnd, // search linked list for Scsi Nexus (channel/target/lun) + ULONG port_id, // search linked list for al_pa, or + UCHAR wwn[8], // search linked list for WWN, or... + PFC_LOGGEDIN_PORT *pLastLoggedInPort ) + +{ + PFC_LOGGEDIN_PORT pLoggedInPort = &fcChip->fcPorts; + BOOLEAN target_id_valid=FALSE; + BOOLEAN port_id_valid=FALSE; + BOOLEAN wwn_valid=FALSE; + int i; + + + if( Cmnd != NULL ) + target_id_valid = TRUE; + + else if( port_id ) // note! 24-bit NULL address is illegal + port_id_valid = TRUE; + + else + { + if( wwn ) // non-null arg? (OK to pass NULL when not searching WWN) + { + for( i=0; i<8; i++) // valid WWN passed? NULL WWN invalid + { + if( wwn[i] != 0 ) + wwn_valid = TRUE; // any non-zero byte makes (presumably) valid + } + } + } + // check other options ... + + + // In case multiple search options are given, we use a priority + // scheme: + // While valid pLoggedIn Ptr + // If port_id is valid + // if port_id matches, return Ptr + // If wwn is valid + // if wwn matches, return Ptr + // Next Ptr in list + // + // Return NULL (not found) + + + while( pLoggedInPort ) // NULL marks end of list (1st ptr always valid) + { + if( pLastLoggedInPort ) // caller's pointer valid? + *pLastLoggedInPort = pLoggedInPort; // end of linked list + + if( target_id_valid ) + { + // check Linux Scsi Cmnd for channel/target Nexus match + // (all luns are accessed through matching "pLoggedInPort") + if( (pLoggedInPort->ScsiNexus.target == Cmnd->device->id) + && + (pLoggedInPort->ScsiNexus.channel == Cmnd->device->channel)) + { + // For "passthru" modes, the IOCTL caller is responsible + // for setting the FCP-LUN addressing + if (Cmnd->sc_request != NULL && Cmnd->device->host != NULL && + Cmnd->device->host->hostdata != NULL && + is_private_data_of_cpqfc((CPQFCHBA *) Cmnd->device->host->hostdata, + Cmnd->sc_request->upper_private_data)) { + /* This is a passthru... */ + cpqfc_passthru_private_t *pd; + pd = Cmnd->sc_request->upper_private_data; + Cmnd->SCp.phase = pd->bus; + // Cmnd->SCp.have_data_in = pd->pdrive; + Cmnd->SCp.have_data_in = Cmnd->device->lun; + } else { + /* This is not a passthru... */ + + // set the FCP-LUN addressing type + Cmnd->SCp.phase = pLoggedInPort->ScsiNexus.VolumeSetAddressing; + + // set the Device Type we got from the snooped INQUIRY string + Cmnd->SCp.Message = pLoggedInPort->ScsiNexus.InqDeviceType; + + // handle LUN masking; if not "default" (illegal) lun value, + // the use it. These lun values are set by a successful + // Report Luns command + if( pLoggedInPort->ScsiNexus.LunMasking == 1) + { + if (Cmnd->device->lun > sizeof(pLoggedInPort->ScsiNexus.lun)) + return NULL; + // we KNOW all the valid LUNs... 0xFF is invalid! + Cmnd->SCp.have_data_in = pLoggedInPort->ScsiNexus.lun[Cmnd->device->lun]; + if (pLoggedInPort->ScsiNexus.lun[Cmnd->device->lun] == 0xFF) + return NULL; + // printk("xlating lun %d to 0x%02x\n", Cmnd->lun, + // pLoggedInPort->ScsiNexus.lun[Cmnd->lun]); + } + else + Cmnd->SCp.have_data_in = Cmnd->device->lun; // Linux & target luns match + } + break; // found it! + } + } + + if( port_id_valid ) // look for alpa first + { + if( pLoggedInPort->port_id == port_id ) + break; // found it! + } + if( wwn_valid ) // look for wwn second + { + + if( !memcmp( &pLoggedInPort->u.ucWWN[0], &wwn[0], 8)) + { + // all 8 bytes of WWN match + break; // found it! + } + } + + pLoggedInPort = pLoggedInPort->pNextPort; // try next port + } + + return pLoggedInPort; +} + + + + +// +// We need to examine the SEST table and re-validate +// any open Exchanges for this LoggedInPort +// To make Tachyon pay attention, Freeze FCP assists, +// set VAL bits, Unfreeze FCP assists +static void RevalidateSEST( struct Scsi_Host *HostAdapter, + PFC_LOGGEDIN_PORT pLoggedInPort) +{ + CPQFCHBA *cpqfcHBAdata = (CPQFCHBA *)HostAdapter->hostdata; + PTACHYON fcChip = &cpqfcHBAdata->fcChip; + FC_EXCHANGES *Exchanges = fcChip->Exchanges; + ULONG x_ID; + BOOLEAN TachFroze = FALSE; + + + // re-validate any SEST exchanges that are permitted + // to survive the link down (e.g., good PDISC performed) + for( x_ID = 0; x_ID < TACH_SEST_LEN; x_ID++) + { + + // If the SEST entry port_id matches the pLoggedInPort, + // we need to re-validate + if( (Exchanges->fcExchange[ x_ID].type == SCSI_IRE) + || + (Exchanges->fcExchange[ x_ID].type == SCSI_IWE)) + { + + if( (Exchanges->fcExchange[ x_ID].fchs.d_id & 0xFFFFFF) // (24-bit port ID) + == pLoggedInPort->port_id) + { +// printk(" re-val xID %Xh ", x_ID); + if( !TachFroze ) // freeze if not already frozen + TachFroze |= FreezeTach( cpqfcHBAdata); + fcChip->SEST->u[ x_ID].IWE.Hdr_Len |= 0x80000000; // set VAL bit + } + } + } + + if( TachFroze) + { + fcChip->UnFreezeTachyon( fcChip, 2); // both ERQ and FCP assists + } +} + + +// Complete an Linux Cmnds that we Queued because +// our FC link was down (cause immediate retry) + +static void UnblockScsiDevice( struct Scsi_Host *HostAdapter, + PFC_LOGGEDIN_PORT pLoggedInPort) +{ + CPQFCHBA *cpqfcHBAdata = (CPQFCHBA *)HostAdapter->hostdata; + Scsi_Cmnd* *SCptr = &cpqfcHBAdata->LinkDnCmnd[0]; + Scsi_Cmnd *Cmnd; + int indx; + + + + // if the device was previously "blocked", make sure + // we unblock it so Linux SCSI will resume + + pLoggedInPort->device_blocked = FALSE; // clear our flag + + // check the Link Down command ptr buffer; + // we can complete now causing immediate retry + for( indx=0; indx < CPQFCTS_REQ_QUEUE_LEN; indx++, SCptr++) + { + if( *SCptr != NULL ) // scsi command to complete? + { +#ifdef DUMMYCMND_DBG + printk("complete Cmnd %p in LinkDnCmnd[%d]\n", *SCptr,indx); +#endif + Cmnd = *SCptr; + + + // Are there any Q'd commands for this target? + if( (Cmnd->device->id == pLoggedInPort->ScsiNexus.target) + && + (Cmnd->device->channel == pLoggedInPort->ScsiNexus.channel) ) + { + Cmnd->result = (DID_SOFT_ERROR <<16); // force retry + if( Cmnd->scsi_done == NULL) + { + printk("LinkDnCmnd scsi_done ptr null, port_id %Xh\n", + pLoggedInPort->port_id); + } + else + call_scsi_done(Cmnd); + *SCptr = NULL; // free this slot for next use + } + } + } +} + + +//#define WWN_DBG 1 + +static void SetLoginFields( + PFC_LOGGEDIN_PORT pLoggedInPort, + TachFCHDR_GCMND* fchs, + BOOLEAN PDisc, + BOOLEAN Originator) +{ + LOGIN_PAYLOAD logi; // FC-PH Port Login + PRLI_REQUEST prli; // copy for BIG ENDIAN switch + int i; +#ifdef WWN_DBG + ULONG ulBuff; +#endif + + BigEndianSwap( (UCHAR*)&fchs->pl[0], (UCHAR*)&logi, sizeof(logi)); + + pLoggedInPort->Originator = Originator; + pLoggedInPort->port_id = fchs->s_id & 0xFFFFFF; + + switch( fchs->pl[0] & 0xffff ) + { + case 0x00000002: // PLOGI or PDISC ACCept? + if( PDisc ) // PDISC accept + goto PDISC_case; + + case 0x00000003: // ELS_PLOGI or ELS_PLOGI_ACC + + // Login BB_credit typically 0 for Tachyons + pLoggedInPort->BB_credit = logi.cmn_services.bb_credit; + + // e.g. 128, 256, 1024, 2048 per FC-PH spec + // We have to use this when setting up SEST Writes, + // since that determines frame size we send. + pLoggedInPort->rx_data_size = logi.class3.rx_data_size; + pLoggedInPort->plogi = TRUE; + pLoggedInPort->pdisc = FALSE; + pLoggedInPort->prli = FALSE; // ELS_PLOGI resets + pLoggedInPort->flogi = FALSE; // ELS_PLOGI resets + pLoggedInPort->logo = FALSE; // ELS_PLOGI resets + pLoggedInPort->LOGO_counter = 0;// ELS_PLOGI resets + pLoggedInPort->LOGO_timer = 0;// ELS_PLOGI resets + + // was this PLOGI to a Fabric? + if( pLoggedInPort->port_id == 0xFFFFFC ) // well know address + pLoggedInPort->flogi = TRUE; + + + for( i=0; i<8; i++) // copy the LOGIN port's WWN + pLoggedInPort->u.ucWWN[i] = logi.port_name[i]; + +#ifdef WWN_DBG + ulBuff = (ULONG)pLoggedInPort->u.liWWN; + if( pLoggedInPort->Originator) + printk("o"); + else + printk("r"); + printk("PLOGI port_id %Xh, WWN %08X", + pLoggedInPort->port_id, ulBuff); + + ulBuff = (ULONG)(pLoggedInPort->u.liWWN >> 32); + printk("%08Xh fcPort %p\n", ulBuff, pLoggedInPort); +#endif + break; + + + + + case 0x00000005: // ELS_LOGO (logout) + + + pLoggedInPort->plogi = FALSE; + pLoggedInPort->pdisc = FALSE; + pLoggedInPort->prli = FALSE; // ELS_PLOGI resets + pLoggedInPort->flogi = FALSE; // ELS_PLOGI resets + pLoggedInPort->logo = TRUE; // ELS_PLOGI resets + pLoggedInPort->LOGO_counter++; // ELS_PLOGI resets + pLoggedInPort->LOGO_timer = 0; +#ifdef WWN_DBG + ulBuff = (ULONG)pLoggedInPort->u.liWWN; + if( pLoggedInPort->Originator) + printk("o"); + else + printk("r"); + printk("LOGO port_id %Xh, WWN %08X", + pLoggedInPort->port_id, ulBuff); + + ulBuff = (ULONG)(pLoggedInPort->u.liWWN >> 32); + printk("%08Xh\n", ulBuff); +#endif + break; + + + +PDISC_case: + case 0x00000050: // ELS_PDISC or ELS_PDISC_ACC + pLoggedInPort->LOGO_timer = 0; // stop the time-out + + pLoggedInPort->prli = TRUE; // ready to accept FCP-SCSI I/O + + + +#ifdef WWN_DBG + ulBuff = (ULONG)pLoggedInPort->u.liWWN; + if( pLoggedInPort->Originator) + printk("o"); + else + printk("r"); + printk("PDISC port_id %Xh, WWN %08X", + pLoggedInPort->port_id, ulBuff); + + ulBuff = (ULONG)(pLoggedInPort->u.liWWN >> 32); + printk("%08Xh\n", ulBuff); +#endif + + + + break; + + + + case 0x1020L: // PRLI? + case 0x1002L: // PRLI ACCept? + BigEndianSwap( (UCHAR*)&fchs->pl[0], (UCHAR*)&prli, sizeof(prli)); + + pLoggedInPort->fcp_info = prli.fcp_info; // target/initiator flags + pLoggedInPort->prli = TRUE; // PLOGI resets, PDISC doesn't + + pLoggedInPort->pdisc = TRUE; // expect to send (or receive) PDISC + // next time + pLoggedInPort->LOGO_timer = 0; // will be set next LinkDown +#ifdef WWN_DBG + ulBuff = (ULONG)pLoggedInPort->u.liWWN; + if( pLoggedInPort->Originator) + printk("o"); + else + printk("r"); + printk("PRLI port_id %Xh, WWN %08X", + pLoggedInPort->port_id, ulBuff); + + ulBuff = (ULONG)(pLoggedInPort->u.liWWN >> 32); + printk("%08Xh\n", ulBuff); +#endif + + break; + + } + + return; +} + + + + + + +static void BuildLinkServicePayload( PTACHYON fcChip, ULONG type, void* payload) +{ + LOGIN_PAYLOAD *plogi; // FC-PH Port Login + LOGIN_PAYLOAD PlogiPayload; // copy for BIG ENDIAN switch + PRLI_REQUEST *prli; // FCP-SCSI Process Login + PRLI_REQUEST PrliPayload; // copy for BIG ENDIAN switch + LOGOUT_PAYLOAD *logo; + LOGOUT_PAYLOAD LogoutPayload; +// PRLO_REQUEST *prlo; +// PRLO_REQUEST PrloPayload; + REJECT_MESSAGE rjt, *prjt; + + memset( &PlogiPayload, 0, sizeof( PlogiPayload)); + plogi = &PlogiPayload; // load into stack buffer, + // then BIG-ENDIAN switch a copy to caller + + + switch( type ) // payload type can be ELS_PLOGI, ELS_PRLI, ADISC, ... + { + case ELS_FDISC: + case ELS_FLOGI: + case ELS_PLOGI_ACC: // FC-PH PORT Login Accept + case ELS_PLOGI: // FC-PH PORT Login + case ELS_PDISC: // FC-PH2 Port Discovery - same payload as ELS_PLOGI + plogi->login_cmd = LS_PLOGI; + if( type == ELS_PDISC) + plogi->login_cmd = LS_PDISC; + else if( type == ELS_PLOGI_ACC ) + plogi->login_cmd = LS_ACC; + + plogi->cmn_services.bb_credit = 0x00; + plogi->cmn_services.lowest_ver = fcChip->lowest_FCPH_ver; + plogi->cmn_services.highest_ver = fcChip->highest_FCPH_ver; + plogi->cmn_services.bb_rx_size = TACHLITE_TS_RX_SIZE; + plogi->cmn_services.common_features = CONTINUOSLY_INCREASING | + RANDOM_RELATIVE_OFFSET; + + // fill in with World Wide Name based Port Name - 8 UCHARs + // get from Tach registers WWN hi & lo + LoadWWN( fcChip, plogi->port_name, 0); + // fill in with World Wide Name based Node/Fabric Name - 8 UCHARs + // get from Tach registers WWN hi & lo + LoadWWN( fcChip, plogi->node_name, 1); + + // For Seagate Drives. + // + plogi->cmn_services.common_features |= 0x800; + plogi->cmn_services.rel_offset = 0xFE; + plogi->cmn_services.concurrent_seq = 1; + plogi->class1.service_options = 0x00; + plogi->class2.service_options = 0x00; + plogi->class3.service_options = CLASS_VALID; + plogi->class3.initiator_control = 0x00; + plogi->class3.rx_data_size = MAX_RX_PAYLOAD; + plogi->class3.recipient_control = + ERROR_DISCARD | ONE_CATEGORY_SEQUENCE; + plogi->class3.concurrent_sequences = 1; + plogi->class3.open_sequences = 1; + plogi->vendor_id[0] = 'C'; plogi->vendor_id[1] = 'Q'; + plogi->vendor_version[0] = 'C'; plogi->vendor_version[1] = 'Q'; + plogi->vendor_version[2] = ' '; plogi->vendor_version[3] = '0'; + plogi->vendor_version[4] = '0'; plogi->vendor_version[5] = '0'; + + + // FLOGI specific fields... (see FC-FLA, Rev 2.7, Aug 1999, sec 5.1) + if( (type == ELS_FLOGI) || (type == ELS_FDISC) ) + { + if( type == ELS_FLOGI ) + plogi->login_cmd = LS_FLOGI; + else + plogi->login_cmd = LS_FDISC; + + plogi->cmn_services.lowest_ver = 0x20; + plogi->cmn_services.common_features = 0x0800; + plogi->cmn_services.rel_offset = 0; + plogi->cmn_services.concurrent_seq = 0; + + plogi->class3.service_options = 0x8800; + plogi->class3.rx_data_size = 0; + plogi->class3.recipient_control = 0; + plogi->class3.concurrent_sequences = 0; + plogi->class3.open_sequences = 0; + } + + // copy back to caller's buff, w/ BIG ENDIAN swap + BigEndianSwap( (UCHAR*)&PlogiPayload, payload, sizeof(PlogiPayload)); + break; + + + case ELS_ACC: // generic Extended Link Service ACCept + plogi->login_cmd = LS_ACC; + // copy back to caller's buff, w/ BIG ENDIAN swap + BigEndianSwap( (UCHAR*)&PlogiPayload, payload, 4); + break; + + + + case ELS_SCR: // Fabric State Change Registration + { + SCR_PL scr; // state change registration + + memset( &scr, 0, sizeof(scr)); + + scr.command = LS_SCR; // 0x62000000 + // see FC-FLA, Rev 2.7, Table A.22 (pg 82) + scr.function = 3; // 1 = Events detected by Fabric + // 2 = N_Port detected registration + // 3 = Full registration + + // copy back to caller's buff, w/ BIG ENDIAN swap + BigEndianSwap( (UCHAR*)&scr, payload, sizeof(SCR_PL)); + } + + break; + + + case FCS_NSR: // Fabric Name Service Request + { + NSR_PL nsr; // Name Server Req. payload + + memset( &nsr, 0, sizeof(NSR_PL)); + + // see Brocade Fabric Programming Guide, + // Rev 1.3, pg 4-44 + nsr.CT_Rev = 0x01000000; + nsr.FCS_Type = 0xFC020000; + nsr.Command_code = 0x01710000; + nsr.FCP = 8; + + // copy back to caller's buff, w/ BIG ENDIAN swap + BigEndianSwap( (UCHAR*)&nsr, payload, sizeof(NSR_PL)); + } + + break; + + + + + case ELS_LOGO: // FC-PH PORT LogOut + logo = &LogoutPayload; // load into stack buffer, + // then BIG-ENDIAN switch a copy to caller + logo->cmd = LS_LOGO; + // load the 3 UCHARs of the node name + // (if private loop, upper two UCHARs 0) + logo->reserved = 0; + + logo->n_port_identifier[0] = (UCHAR)(fcChip->Registers.my_al_pa); + logo->n_port_identifier[1] = + (UCHAR)(fcChip->Registers.my_al_pa>>8); + logo->n_port_identifier[2] = + (UCHAR)(fcChip->Registers.my_al_pa>>16); + // fill in with World Wide Name based Port Name - 8 UCHARs + // get from Tach registers WWN hi & lo + LoadWWN( fcChip, logo->port_name, 0); + + BigEndianSwap( (UCHAR*)&LogoutPayload, + payload, sizeof(LogoutPayload) ); // 16 UCHAR struct + break; + + + case ELS_LOGO_ACC: // Logout Accept (FH-PH pg 149, table 74) + logo = &LogoutPayload; // load into stack buffer, + // then BIG-ENDIAN switch a copy to caller + logo->cmd = LS_ACC; + BigEndianSwap( (UCHAR*)&LogoutPayload, payload, 4 ); // 4 UCHAR cmnd + break; + + + case ELS_RJT: // ELS_RJT link service reject (FH-PH pg 155) + + prjt = (REJECT_MESSAGE*)payload; // pick up passed data + rjt.command_code = ELS_RJT; + // reverse fields, because of Swap that follows... + rjt.vendor = prjt->reserved; // vendor specific + rjt.explain = prjt->reason; // + rjt.reason = prjt->explain; // + rjt.reserved = prjt->vendor; // + // BIG-ENDIAN switch a copy to caller + BigEndianSwap( (UCHAR*)&rjt, payload, 8 ); // 8 UCHAR cmnd + break; + + + + + + case ELS_PRLI_ACC: // Process Login ACCept + case ELS_PRLI: // Process Login + case ELS_PRLO: // Process Logout + memset( &PrliPayload, 0, sizeof( PrliPayload)); + prli = &PrliPayload; // load into stack buffer, + + if( type == ELS_PRLI ) + prli->cmd = 0x20; // Login + else if( type == ELS_PRLO ) + prli->cmd = 0x21; // Logout + else if( type == ELS_PRLI_ACC ) + { + prli->cmd = 0x02; // Login ACCept + prli->valid = REQUEST_EXECUTED; + } + + + prli->valid |= SCSI_FCP | ESTABLISH_PAIR; + prli->fcp_info = READ_XFER_RDY; + prli->page_length = 0x10; + prli->payload_length = 20; + // Can be initiator AND target + + if( fcChip->Options.initiator ) + prli->fcp_info |= INITIATOR_FUNCTION; + if( fcChip->Options.target ) + prli->fcp_info |= TARGET_FUNCTION; + + BigEndianSwap( (UCHAR*)&PrliPayload, payload, prli->payload_length); + break; + + + + default: // no can do - programming error + printk(" BuildLinkServicePayload unknown!\n"); + break; + } +} + +// loads 8 UCHARs for PORT name or NODE name base on +// controller's WWN. +void LoadWWN( PTACHYON fcChip, UCHAR* dest, UCHAR type) +{ + UCHAR* bPtr, i; + + switch( type ) + { + case 0: // Port_Name + bPtr = (UCHAR*)&fcChip->Registers.wwn_hi; + for( i =0; i<4; i++) + dest[i] = *bPtr++; + bPtr = (UCHAR*)&fcChip->Registers.wwn_lo; + for( i =4; i<8; i++) + dest[i] = *bPtr++; + break; + case 1: // Node/Fabric _Name + bPtr = (UCHAR*)&fcChip->Registers.wwn_hi; + for( i =0; i<4; i++) + dest[i] = *bPtr++; + bPtr = (UCHAR*)&fcChip->Registers.wwn_lo; + for( i =4; i<8; i++) + dest[i] = *bPtr++; + break; + } + +} + + + +// We check the Port Login payload for required values. Note that +// ELS_PLOGI and ELS_PDISC (Port DISCover) use the same payload. + + +int verify_PLOGI( PTACHYON fcChip, + TachFCHDR_GCMND* fchs, + ULONG* reject_explain) +{ + LOGIN_PAYLOAD login; + + // source, dest, len (should be mult. of 4) + BigEndianSwap( (UCHAR*)&fchs->pl[0], (UCHAR*)&login, sizeof(login)); + + // check FC version + // if other port's highest supported version + // is less than our lowest, and + // if other port's lowest + if( login.cmn_services.highest_ver < fcChip->lowest_FCPH_ver || + login.cmn_services.lowest_ver > fcChip->highest_FCPH_ver ) + { + *reject_explain = LS_RJT_REASON( LOGICAL_ERROR, OPTIONS_ERROR); + return LOGICAL_ERROR; + } + + // Receive Data Field Size must be >=128 + // per FC-PH + if (login.cmn_services.bb_rx_size < 128) + { + *reject_explain = LS_RJT_REASON( LOGICAL_ERROR, DATA_FIELD_SIZE_ERROR); + return LOGICAL_ERROR; + } + + // Only check Class 3 params + if( login.class3.service_options & CLASS_VALID) + { + if (login.class3.rx_data_size < 128) + { + *reject_explain = LS_RJT_REASON( LOGICAL_ERROR, INVALID_CSP); + return LOGICAL_ERROR; + } + if( login.class3.initiator_control & XID_REQUIRED) + { + *reject_explain = LS_RJT_REASON( LOGICAL_ERROR, INITIATOR_CTL_ERROR); + return LOGICAL_ERROR; + } + } + return 0; // success +} + + + + +int verify_PRLI( TachFCHDR_GCMND* fchs, ULONG* reject_explain) +{ + PRLI_REQUEST prli; // buffer for BIG ENDIAN + + // source, dest, len (should be mult. of 4) + BigEndianSwap( (UCHAR*)&fchs->pl[0], (UCHAR*)&prli, sizeof(prli)); + + if( prli.fcp_info == 0 ) // i.e., not target or initiator? + { + *reject_explain = LS_RJT_REASON( LOGICAL_ERROR, OPTIONS_ERROR); + return LOGICAL_ERROR; + } + + return 0; // success +} + + +// SWAP UCHARs as required by Fibre Channel (i.e. BIG ENDIAN) +// INPUTS: +// source - ptr to LITTLE ENDIAN ULONGS +// cnt - number of UCHARs to switch (should be mult. of ULONG) +// OUTPUTS: +// dest - ptr to BIG ENDIAN copy +// RETURN: +// none +// +void BigEndianSwap( UCHAR *source, UCHAR *dest, USHORT cnt) +{ + int i,j; + + source+=3; // start at MSB of 1st ULONG + for( j=0; j < cnt; j+=4, source+=4, dest+=4) // every ULONG + { + for( i=0; i<4; i++) // every UCHAR in ULONG + *(dest+i) = *(source-i); + } +} + + + + +// Build FC Exchanges............ + +static void buildFCPstatus( + PTACHYON fcChip, + ULONG ExchangeID); + +static LONG FindFreeExchange( PTACHYON fcChip, ULONG type ); + +static ULONG build_SEST_sgList( + struct pci_dev *pcidev, + ULONG *SESTalPairStart, + Scsi_Cmnd *Cmnd, + ULONG *sgPairs, + PSGPAGES *sgPages_head // link list of TL Ext. S/G pages from O/S Pool +); + +static int build_FCP_payload( Scsi_Cmnd *Cmnd, + UCHAR* payload, ULONG type, ULONG fcp_dl ); + + +/* + IRB + ERQ __________________ + | | / | Req_A_SFS_Len | ____________________ + |----------| / | Req_A_SFS_Addr |------->| Reserved | + | IRB | / | Req_A_D_ID | | SOF EOF TimeStamp | + |-----------/ | Req_A_SEST_Index |-+ | R_CTL | D_ID | + | IRB | | Req_B... | | | CS_CTL| S_ID | + |-----------\ | | | | TYPE | F_CTL | + | IRB | \ | | | | SEQ_ID | SEQ_CNT | + |----------- \ | | +-->+--| OX_ID | RX_ID | + | | \ |__________________| | | RO | + | | pl (payload/cmnd) | + | | ..... | + | |___________________| + | + | ++-------------------------------------------+ +| +| +| e.g. IWE +| SEST __________________ for FCP_DATA +| | | / | | Hdr_Len | ____________________ +| |----------| / | Hdr_Addr_Addr |------->| Reserved | +| | [0] | / |Remote_ID| RSP_Len| | SOF EOF TimeStamp | +| |-----------/ | RSP_Addr |---+ | R_CTL | D_ID | ++-> [1] | | | Buff_Off | | | CS_CTL| S_ID | + |-----------\ |BuffIndex| Link | | | TYPE | F_CTL | + | [2] | \ | Rsvd | RX_ID | | | SEQ_ID | SEQ_CNT | + |----------- \ | Data_Len | | | OX_ID | RX_ID | + | ... | \ | Exp_RO | | | RO | + |----------| | Exp_Byte_Cnt | | |___________________| + | SEST_LEN | +--| Len | | + |__________| | | Address | | + | | ... | | for FCP_RSP + | |__________________| | ____________________ + | +----| Reserved | + | | SOF EOF TimeStamp | + | | R_CTL | D_ID | + | | CS_CTL| S_ID | + +--- local or extended | .... | + scatter/gather lists + defining upper-layer + data (e.g. from user's App) + + +*/ +// All TachLite commands must start with a SFS (Single Frame Sequence) +// command. In the simplest case (a NOP Basic Link command), +// only one frame header and ERQ entry is required. The most complex +// case is the SCSI assisted command, which requires an ERQ entry, +// SEST entry, and several frame headers and data buffers all +// logically linked together. +// Inputs: +// cpqfcHBAdata - controller struct +// type - PLOGI, SCSI_IWE, etc. +// InFCHS - Incoming Tachlite FCHS which prompted this exchange +// (only s_id set if we are originating) +// Data - PVOID to data struct consistent with "type" +// fcExchangeIndex - pointer to OX/RD ID value of built exchange +// Return: +// fcExchangeIndex - OX/RD ID value if successful +// 0 - success +// INVALID_ARGS - NULL/ invalid passed args +// BAD_ALPA - Bad source al_pa address +// LNKDWN_OSLS - Link Down (according to this controller) +// OUTQUE_FULL - Outbound Que full +// DRIVERQ_FULL - controller's Exchange array full +// SEST_FULL - SEST table full +// +// Remarks: +// Psuedo code: +// Check for NULL pointers / bad args +// Build outgoing FCHS - the header/payload struct +// Build IRB (for ERQ entry) +// if SCSI command, build SEST entry (e.g. IWE, TRE,...) +// return success + +//sbuildex +ULONG cpqfcTSBuildExchange( + CPQFCHBA *cpqfcHBAdata, + ULONG type, // e.g. PLOGI + TachFCHDR_GCMND* InFCHS, // incoming FCHS + void *Data, // the CDB, scatter/gather, etc. + LONG *fcExchangeIndex ) // points to allocated exchange, +{ + PTACHYON fcChip = &cpqfcHBAdata->fcChip; + FC_EXCHANGES *Exchanges = fcChip->Exchanges; + ULONG ulStatus = 0; // assume OK + USHORT ox_ID, rx_ID=0xFFFF; + ULONG SfsLen=0L; + TachLiteIRB* pIRB; + IRBflags IRB_flags; + UCHAR *pIRB_flags = (UCHAR*)&IRB_flags; + TachFCHDR_GCMND* CMDfchs; + TachFCHDR* dataHDR; // 32 byte HEADER ONLY FCP-DATA buffer + TachFCHDR_RSP* rspHDR; // 32 byte header + RSP payload + Scsi_Cmnd *Cmnd = (Scsi_Cmnd*)Data; // Linux Scsi CDB, S/G, ... + TachLiteIWE* pIWE; + TachLiteIRE* pIRE; + TachLiteTWE* pTWE; + TachLiteTRE* pTRE; + ULONG fcp_dl; // total byte length of DATA transferred + ULONG fl; // frame length (FC frame size, 128, 256, 512, 1024) + ULONG sgPairs; // number of valid scatter/gather pairs + int FCP_SCSI_command; + BA_ACC_PAYLOAD *ba_acc; + BA_RJT_PAYLOAD *ba_rjt; + + // check passed ARGS + if( !fcChip->ERQ ) // NULL ptr means uninitialized Tachlite chip + return INVALID_ARGS; + + + if( type == SCSI_IRE || + type == SCSI_TRE || + type == SCSI_IWE || + type == SCSI_TWE) + FCP_SCSI_command = 1; + + else + FCP_SCSI_command = 0; + + + // for commands that pass payload data (e.g. SCSI write) + // examine command struct - verify that the + // length of s/g buffers is adequate for total payload + // length (end of list is NULL address) + + if( FCP_SCSI_command ) + { + if( Data ) // must have data descriptor (S/G list -- at least + // one address with at least 1 byte of data) + { + // something to do (later)? + } + + else + return INVALID_ARGS; // invalid DATA ptr + } + + + + // we can build an Exchange for later Queuing (on the TL chip) + // if an empty slot is available in the DevExt for this controller + // look for available Exchange slot... + + if( type != FCP_RESPONSE && + type != BLS_ABTS && + type != BLS_ABTS_ACC ) // already have Exchange slot! + *fcExchangeIndex = FindFreeExchange( fcChip, type ); + + if( *fcExchangeIndex != -1 ) // Exchange is available? + { + // assign tmp ptr (shorthand) + CMDfchs = &Exchanges->fcExchange[ *fcExchangeIndex].fchs; + + if( Cmnd != NULL ) // (necessary for ABTS cases) + { + Exchanges->fcExchange[ *fcExchangeIndex].Cmnd = Cmnd; // Linux Scsi + Exchanges->fcExchange[ *fcExchangeIndex].pLoggedInPort = + fcFindLoggedInPort( fcChip, + Exchanges->fcExchange[ *fcExchangeIndex].Cmnd, // find Scsi Nexus + 0, // DON'T search linked list for FC port id + NULL, // DON'T search linked list for FC WWN + NULL); // DON'T care about end of list + + } + + + // Build the command frame header (& data) according + // to command type + + // fields common for all SFS frame types + CMDfchs->reserved = 0L; // must clear + CMDfchs->sof_eof = 0x75000000L; // SOFi3:EOFn no UAM; LCr=0, no TS + + // get the destination port_id from incoming FCHS + // (initialized before calling if we're Originator) + // Frame goes to port it was from - the source_id + + CMDfchs->d_id = InFCHS->s_id &0xFFFFFF; // destination (add R_CTL later) + CMDfchs->s_id = fcChip->Registers.my_al_pa; // CS_CTL = 0 + + + // now enter command-specific fields + switch( type ) + { + + case BLS_NOP: // FC defined basic link service command NO-OP + // ensure unique X_IDs! (use tracking function) + + *pIRB_flags = 0; // clear IRB flags + IRB_flags.SFA = 1; // send SFS (not SEST index) + SfsLen = *pIRB_flags; + + SfsLen <<= 24; // shift flags to MSB + SfsLen += 32L; // add len to LSB (header only - no payload) + + // TYPE[31-24] 00 Basic Link Service + // f_ctl[23:0] exchg originator, 1st seq, xfer S.I. + CMDfchs->d_id |= 0x80000000L; // R_CTL = 80 for NOP (Basic Link Ser.) + CMDfchs->f_ctl = 0x00310000L; // xchng originator, 1st seq,.... + CMDfchs->seq_cnt = 0x0L; + CMDfchs->ox_rx_id = 0xFFFF; // RX_ID for now; OX_ID on start + CMDfchs->ro = 0x0L; // relative offset (n/a) + CMDfchs->pl[0] = 0xaabbccddL; // words 8-15 frame data payload (n/a) + Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 1; // seconds + // (NOP should complete ~instantly) + break; + + + + + case BLS_ABTS_ACC: // Abort Sequence ACCept + *pIRB_flags = 0; // clear IRB flags + IRB_flags.SFA = 1; // send SFS (not SEST index) + SfsLen = *pIRB_flags; + + SfsLen <<= 24; // shift flags to MSB + SfsLen += 32 + 12; // add len to LSB (header + 3 DWORD payload) + + CMDfchs->d_id |= 0x84000000L; // R_CTL = 84 for BASIC ACCept + // TYPE[31-24] 00 Basic Link Service + // f_ctl[23:0] exchg originator, not 1st seq, xfer S.I. + CMDfchs->f_ctl = 0x00910000L; // xchnge responder, last seq, xfer SI + // CMDfchs->seq_id & count might be set from DataHdr? + CMDfchs->ro = 0x0L; // relative offset (n/a) + Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 5; // seconds + // (Timeout in case of weird error) + + // now set the ACCept payload... + ba_acc = (BA_ACC_PAYLOAD*)&CMDfchs->pl[0]; + memset( ba_acc, 0, sizeof( BA_ACC_PAYLOAD)); + // Since PLDA requires (only) entire Exchange aborts, we don't need + // to worry about what the last sequence was. + + // We expect that a "target" task is accepting the abort, so we + // can use the OX/RX ID pair + ba_acc->ox_rx_id = CMDfchs->ox_rx_id; + + // source, dest, #bytes + BigEndianSwap((UCHAR *)&CMDfchs->ox_rx_id, (UCHAR *)&ba_acc->ox_rx_id, 4); + + ba_acc->low_seq_cnt = 0; + ba_acc->high_seq_cnt = 0xFFFF; + + + break; + + + case BLS_ABTS_RJT: // Abort Sequence ACCept + *pIRB_flags = 0; // clear IRB flags + IRB_flags.SFA = 1; // send SFS (not SEST index) + SfsLen = *pIRB_flags; + + SfsLen <<= 24; // shift flags to MSB + SfsLen += 32 + 12; // add len to LSB (header + 3 DWORD payload) + + CMDfchs->d_id |= 0x85000000L; // R_CTL = 85 for BASIC ReJecT + // f_ctl[23:0] exchg originator, not 1st seq, xfer S.I. + // TYPE[31-24] 00 Basic Link Service + CMDfchs->f_ctl = 0x00910000L; // xchnge responder, last seq, xfer SI + // CMDfchs->seq_id & count might be set from DataHdr? + CMDfchs->ro = 0x0L; // relative offset (n/a) + Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 5; // seconds + // (Timeout in case of weird error) + + CMDfchs->ox_rx_id = InFCHS->ox_rx_id; // copy from sender! + + // now set the ReJecT payload... + ba_rjt = (BA_RJT_PAYLOAD*)&CMDfchs->pl[0]; + memset( ba_rjt, 0, sizeof( BA_RJT_PAYLOAD)); + + // We expect that a "target" task couldn't find the Exhange in the + // array of active exchanges, so we use a new LinkService X_ID. + // See Reject payload description in FC-PH (Rev 4.3), pg. 140 + ba_rjt->reason_code = 0x09; // "unable to perform command request" + ba_rjt->reason_explain = 0x03; // invalid OX/RX ID pair + + + break; + + + case BLS_ABTS: // FC defined basic link service command ABTS + // Abort Sequence + + + *pIRB_flags = 0; // clear IRB flags + IRB_flags.SFA = 1; // send SFS (not SEST index) + SfsLen = *pIRB_flags; + + SfsLen <<= 24; // shift flags to MSB + SfsLen += 32L; // add len to LSB (header only - no payload) + + // TYPE[31-24] 00 Basic Link Service + // f_ctl[23:0] exchg originator, not 1st seq, xfer S.I. + CMDfchs->d_id |= 0x81000000L; // R_CTL = 81 for ABTS + CMDfchs->f_ctl = 0x00110000L; // xchnge originator, last seq, xfer SI + // CMDfchs->seq_id & count might be set from DataHdr? + CMDfchs->ro = 0x0L; // relative offset (n/a) + Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 2; // seconds + // (ABTS must timeout when responder is gone) + break; + + + + case FCS_NSR: // Fabric Name Service Request + Exchanges->fcExchange[ *fcExchangeIndex].reTries = 2; + + + Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 2; // seconds + // OX_ID, linked to Driver Transaction ID + // (fix-up at Queing time) + CMDfchs->ox_rx_id = 0xFFFF; // RX_ID - Responder (target) to modify + // OX_ID set at ERQueing time + *pIRB_flags = 0; // clear IRB flags + IRB_flags.SFA = 1; // send SFS (not SEST index) + SfsLen = *pIRB_flags; + + SfsLen <<= 24; // shift flags to MSB + SfsLen += (32L + sizeof(NSR_PL)); // add len (header & NSR payload) + + CMDfchs->d_id |= 0x02000000L; // R_CTL = 02 for - + // Name Service Request: Unsolicited + // TYPE[31-24] 01 Extended Link Service + // f_ctl[23:0] exchg originator, 1st seq, xfer S.I. + CMDfchs->f_ctl = 0x20210000L; + // OX_ID will be fixed-up at Tachyon enqueing time + CMDfchs->seq_cnt = 0; // seq ID, DF_ctl, seq cnt + CMDfchs->ro = 0x0L; // relative offset (n/a) + + BuildLinkServicePayload( fcChip, type, &CMDfchs->pl[0]); + + + + + + + break; + + + + + case ELS_PLOGI: // FC-PH extended link service command Port Login + // (May, 2000) + // NOTE! This special case facilitates SANMark testing. The SANMark + // test script for initialization-timeout.fcal.SANMark-1.fc + // "eats" the OPN() primitive without issuing an R_RDY, causing + // Tachyon to report LST (loop state timeout), which causes a + // LIP. To avoid this, simply send out the frame (i.e. assuming a + // buffer credit of 1) without waiting for R_RDY. Many FC devices + // (other than Tachyon) have been doing this for years. We don't + // ever want to do this for non-Link Service frames unless the + // other device really did report non-zero login BB credit (i.e. + // in the PLOGI ACCept frame). +// CMDfchs->sof_eof |= 0x00000400L; // LCr=1 + + case ELS_FDISC: // Fabric Discovery (Login) + case ELS_FLOGI: // Fabric Login + case ELS_SCR: // Fabric State Change Registration + case ELS_LOGO: // FC-PH extended link service command Port Logout + case ELS_PDISC: // FC-PH extended link service cmnd Port Discovery + case ELS_PRLI: // FC-PH extended link service cmnd Process Login + + Exchanges->fcExchange[ *fcExchangeIndex].reTries = 2; + + + Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 2; // seconds + // OX_ID, linked to Driver Transaction ID + // (fix-up at Queing time) + CMDfchs->ox_rx_id = 0xFFFF; // RX_ID - Responder (target) to modify + // OX_ID set at ERQueing time + *pIRB_flags = 0; // clear IRB flags + IRB_flags.SFA = 1; // send SFS (not SEST index) + SfsLen = *pIRB_flags; + + SfsLen <<= 24; // shift flags to MSB + if( type == ELS_LOGO ) + SfsLen += (32L + 16L); // add len (header & PLOGI payload) + else if( type == ELS_PRLI ) + SfsLen += (32L + 20L); // add len (header & PRLI payload) + else if( type == ELS_SCR ) + SfsLen += (32L + sizeof(SCR_PL)); // add len (header & SCR payload) + else + SfsLen += (32L + 116L); // add len (header & PLOGI payload) + + CMDfchs->d_id |= 0x22000000L; // R_CTL = 22 for - + // Extended Link_Data: Unsolicited Control + // TYPE[31-24] 01 Extended Link Service + // f_ctl[23:0] exchg originator, 1st seq, xfer S.I. + CMDfchs->f_ctl = 0x01210000L; + // OX_ID will be fixed-up at Tachyon enqueing time + CMDfchs->seq_cnt = 0; // seq ID, DF_ctl, seq cnt + CMDfchs->ro = 0x0L; // relative offset (n/a) + + BuildLinkServicePayload( fcChip, type, &CMDfchs->pl[0]); + + break; + + + + case ELS_LOGO_ACC: // FC-PH extended link service logout accept + case ELS_RJT: // extended link service reject (add reason) + case ELS_ACC: // ext. link service generic accept + case ELS_PLOGI_ACC:// ext. link service login accept (PLOGI or PDISC) + case ELS_PRLI_ACC: // ext. link service process login accept + + + Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 1; // assume done + // ensure unique X_IDs! (use tracking function) + // OX_ID from initiator cmd + ox_ID = (USHORT)(InFCHS->ox_rx_id >> 16); + rx_ID = 0xFFFF; // RX_ID, linked to Driver Exchange ID + + *pIRB_flags = 0; // clear IRB flags + IRB_flags.SFA = 1; // send SFS (not SEST index) + SfsLen = *pIRB_flags; + + SfsLen <<= 24; // shift flags to MSB + if( type == ELS_RJT ) + { + SfsLen += (32L + 8L); // add len (header + payload) + + // ELS_RJT reason codes (utilize unused "reserved" field) + CMDfchs->pl[0] = 1; + CMDfchs->pl[1] = InFCHS->reserved; + + } + else if( (type == ELS_LOGO_ACC) || (type == ELS_ACC) ) + SfsLen += (32L + 4L); // add len (header + payload) + else if( type == ELS_PLOGI_ACC ) + SfsLen += (32L + 116L); // add len (header + payload) + else if( type == ELS_PRLI_ACC ) + SfsLen += (32L + 20L); // add len (header + payload) + + CMDfchs->d_id |= 0x23000000L; // R_CTL = 23 for - + // Extended Link_Data: Control Reply + // TYPE[31-24] 01 Extended Link Service + // f_ctl[23:0] exchg responder, last seq, e_s, tsi + CMDfchs->f_ctl = 0x01990000L; + CMDfchs->seq_cnt = 0x0L; + CMDfchs->ox_rx_id = 0L; // clear + CMDfchs->ox_rx_id = ox_ID; // load upper 16 bits + CMDfchs->ox_rx_id <<= 16; // shift them + + CMDfchs->ro = 0x0L; // relative offset (n/a) + + BuildLinkServicePayload( fcChip, type, &CMDfchs->pl[0]); + + break; + + + // Fibre Channel SCSI 'originator' sequences... + // (originator means 'initiator' in FCP-SCSI) + + case SCSI_IWE: // TachLite Initiator Write Entry + { + PFC_LOGGEDIN_PORT pLoggedInPort = + Exchanges->fcExchange[ *fcExchangeIndex].pLoggedInPort; + + Exchanges->fcExchange[ *fcExchangeIndex].reTries = 1; + Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 7; // FC2 timeout + + // first, build FCP_CMND + // unique X_ID fix-ups in StartExchange + + *pIRB_flags = 0; // clear IRB flags + IRB_flags.SFA = 1; // send SFS FCP-CMND (not SEST index) + + // NOTE: unlike FC LinkService login frames, normal + // SCSI commands are sent without outgoing verification + IRB_flags.DCM = 1; // Disable completion message for Cmnd frame + SfsLen = *pIRB_flags; + + SfsLen <<= 24; // shift flags to MSB + SfsLen += 64L; // add len to LSB (header & CMND payload) + + CMDfchs->d_id |= (0x06000000L); // R_CTL = 6 for command + + // TYPE[31-24] 8 for FCP SCSI + // f_ctl[23:0] exchg originator, 1st seq, xfer S.I. + // valid RO + CMDfchs->f_ctl = 0x08210008L; + CMDfchs->seq_cnt = 0x0L; + CMDfchs->ox_rx_id = 0L; // clear for now (-or- in later) + CMDfchs->ro = 0x0L; // relative offset (n/a) + + // now, fill out FCP-DATA header + // (use buffer inside SEST object) + dataHDR = &fcChip->SEST->DataHDR[ *fcExchangeIndex ]; + dataHDR->reserved = 0L; // must clear + dataHDR->sof_eof = 0x75002000L; // SOFi3:EOFn no UAM; no CLS, noLCr, no TS + dataHDR->d_id = (InFCHS->s_id | 0x01000000L); // R_CTL= FCP_DATA + dataHDR->s_id = fcChip->Registers.my_al_pa; // CS_CTL = 0 + // TYPE[31-24] 8 for FCP SCSI + // f_ctl[23:0] xfer S.I.| valid RO + dataHDR->f_ctl = 0x08010008L; + dataHDR->seq_cnt = 0x02000000L; // sequence ID: df_ctl : seqence count + dataHDR->ox_rx_id = 0L; // clear; fix-up dataHDR fields later + dataHDR->ro = 0x0L; // relative offset (n/a) + + // Now setup the SEST entry + pIWE = &fcChip->SEST->u[ *fcExchangeIndex ].IWE; + + // fill out the IWE: + + // VALid entry:Dir outbound:DCM:enable CM:enal INT: FC frame len + pIWE->Hdr_Len = 0x8e000020L; // data frame Len always 32 bytes + + + // from login parameters with other port, what's the largest frame + // we can send? + if( pLoggedInPort == NULL) + { + ulStatus = INVALID_ARGS; // failed! give up + break; + } + if( pLoggedInPort->rx_data_size >= 2048) + fl = 0x00020000; // 2048 code (only support 1024!) + else if( pLoggedInPort->rx_data_size >= 1024) + fl = 0x00020000; // 1024 code + else if( pLoggedInPort->rx_data_size >= 512) + fl = 0x00010000; // 512 code + else + fl = 0; // 128 bytes -- should never happen + + + pIWE->Hdr_Len |= fl; // add xmit FC frame len for data phase + pIWE->Hdr_Addr = fcChip->SEST->base + + ((unsigned long)&fcChip->SEST->DataHDR[*fcExchangeIndex] - + (unsigned long)fcChip->SEST); + + pIWE->RSP_Len = sizeof(TachFCHDR_RSP) ; // hdr+data (recv'd RSP frame) + pIWE->RSP_Len |= (InFCHS->s_id << 8); // MS 24 bits Remote_ID + + memset( &fcChip->SEST->RspHDR[ *fcExchangeIndex].pl, 0, + sizeof( FCP_STATUS_RESPONSE) ); // clear out previous status + + pIWE->RSP_Addr = fcChip->SEST->base + + ((unsigned long)&fcChip->SEST->RspHDR[*fcExchangeIndex] - + (unsigned long)fcChip->SEST); + + // Do we need local or extended gather list? + // depends on size - we can handle 3 len/addr pairs + // locally. + + fcp_dl = build_SEST_sgList( + cpqfcHBAdata->PciDev, + &pIWE->GLen1, + Cmnd, // S/G list + &sgPairs, // return # of pairs in S/G list (from "Data" descriptor) + &fcChip->SEST->sgPages[ *fcExchangeIndex ]);// (for Freeing later) + + if( !fcp_dl ) // error building S/G list? + { + ulStatus = MEMPOOL_FAIL; + break; // give up + } + + // Now that we know total data length in + // the passed S/G buffer, set FCP CMND frame + build_FCP_payload( Cmnd, (UCHAR*)&CMDfchs->pl[0], type, fcp_dl ); + + + + if( sgPairs > 3 ) // need extended s/g list + pIWE->Buff_Off = 0x78000000L; // extended data | (no offset) + else // local data pointers (in SEST) + pIWE->Buff_Off = 0xf8000000L; // local data | (no offset) + + // ULONG 5 + pIWE->Link = 0x0000ffffL; // Buff_Index | Link + + pIWE->RX_ID = 0x0L; // DWord 6: RX_ID set by target XFER_RDY + + // DWord 7 + pIWE->Data_Len = 0L; // TL enters rcv'd XFER_RDY BURST_LEN + pIWE->Exp_RO = 0L; // DWord 8 + // DWord 9 + pIWE->Exp_Byte_Cnt = fcp_dl; // sum of gather buffers + } + break; + + + + + + case SCSI_IRE: // TachLite Initiator Read Entry + + if( Cmnd->timeout != 0) + { +// printk("Cmnd->timeout %d\n", Cmnd->timeout); + // per Linux Scsi + Exchanges->fcExchange[ *fcExchangeIndex].timeOut = Cmnd->timeout; + } + else // use our best guess, based on FC & device + { + + if( Cmnd->SCp.Message == 1 ) // Tape device? (from INQUIRY) + { + // turn off our timeouts (for now...) + Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 0xFFFFFFFF; + } + else + { + Exchanges->fcExchange[ *fcExchangeIndex].reTries = 1; + Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 7; // per SCSI req. + } + } + + + // first, build FCP_CMND + + + *pIRB_flags = 0; // clear IRB flags + IRB_flags.SFA = 1; // send SFS FCP-CMND (not SEST index) + // NOTE: unlike FC LinkService login frames, + // normal SCSI commands are sent "open loop" + IRB_flags.DCM = 1; // Disable completion message for Cmnd frame + SfsLen = *pIRB_flags; + + SfsLen <<= 24; // shift flags to MSB + SfsLen += 64L; // add len to LSB (header & CMND payload) + + CMDfchs->d_id |= (0x06000000L); // R_CTL = 6 for command + + // TYPE[31-24] 8 for FCP SCSI + // f_ctl[23:0] exchg originator, 1st seq, xfer S.I. + // valid RO + CMDfchs->f_ctl = 0x08210008L; + CMDfchs->seq_cnt = 0x0L; + // x_ID & data direction bit set later + CMDfchs->ox_rx_id = 0xFFFF; // clear + CMDfchs->ro = 0x0L; // relative offset (n/a) + + + + // Now setup the SEST entry + pIRE = &fcChip->SEST->u[ *fcExchangeIndex ].IRE; + + // fill out the IRE: + // VALid entry:Dir outbound:enable CM:enal INT: + pIRE->Seq_Accum = 0xCE000000L; // VAL,DIR inbound,DCM| INI,DAT,RSP + + pIRE->reserved = 0L; + pIRE->RSP_Len = sizeof(TachFCHDR_RSP) ; // hdr+data (recv'd RSP frame) + pIRE->RSP_Len |= (InFCHS->s_id << 8); // MS 24 bits Remote_ID + + pIRE->RSP_Addr = fcChip->SEST->base + + ((unsigned long)&fcChip->SEST->RspHDR[*fcExchangeIndex] - + (unsigned long)fcChip->SEST); + + // Do we need local or extended gather list? + // depends on size - we can handle 3 len/addr pairs + // locally. + + fcp_dl = build_SEST_sgList( + cpqfcHBAdata->PciDev, + &pIRE->SLen1, + Cmnd, // SCSI command Data desc. with S/G list + &sgPairs, // return # of pairs in S/G list (from "Data" descriptor) + &fcChip->SEST->sgPages[ *fcExchangeIndex ]);// (for Freeing later) + + + if( !fcp_dl ) // error building S/G list? + { + // It is permissible to have a ZERO LENGTH Read command. + // If there is the case, simply set fcp_dl (and Exp_Byte_Cnt) + // to 0 and continue. + if( Cmnd->request_bufflen == 0 ) + { + fcp_dl = 0; // no FC DATA frames expected + + } + else + { + ulStatus = MEMPOOL_FAIL; + break; // give up + } + } + + // now that we know the S/G length, build CMND payload + build_FCP_payload( Cmnd, (UCHAR*)&CMDfchs->pl[0], type, fcp_dl ); + + + if( sgPairs > 3 ) // need extended s/g list + pIRE->Buff_Off = 0x00000000; // DWord 4: extended s/g list, no offset + else + pIRE->Buff_Off = 0x80000000; // local data, no offset + + pIRE->Buff_Index = 0x0L; // DWord 5: Buff_Index | Reserved + + pIRE->Exp_RO = 0x0L; // DWord 6: Expected Rel. Offset + + pIRE->Byte_Count = 0; // DWord 7: filled in by TL on err + pIRE->reserved_ = 0; // DWord 8: reserved + // NOTE: 0 length READ is OK. + pIRE->Exp_Byte_Cnt = fcp_dl;// DWord 9: sum of scatter buffers + + break; + + + + + // Fibre Channel SCSI 'responder' sequences... + // (originator means 'target' in FCP-SCSI) + case SCSI_TWE: // TachLite Target Write Entry + + Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 10; // per SCSI req. + + // first, build FCP_CMND + + *pIRB_flags = 0; // clear IRB flags + IRB_flags.SFA = 1; // send SFS (XFER_RDY) + SfsLen = *pIRB_flags; + + SfsLen <<= 24; // shift flags to MSB + SfsLen += (32L + 12L);// add SFS len (header & XFER_RDY payload) + + CMDfchs->d_id |= (0x05000000L); // R_CTL = 5 for XFER_RDY + + // TYPE[31-24] 8 for FCP SCSI + // f_ctl[23:0] exchg responder, 1st seq, xfer S.I. + // valid RO + CMDfchs->f_ctl = 0x08810008L; + CMDfchs->seq_cnt = 0x01000000; // sequence ID: df_ctl: sequence count + // use originator (other port's) OX_ID + CMDfchs->ox_rx_id = InFCHS->ox_rx_id; // we want upper 16 bits + CMDfchs->ro = 0x0L; // relative offset (n/a) + + // now, fill out FCP-RSP header + // (use buffer inside SEST object) + + rspHDR = &fcChip->SEST->RspHDR[ *fcExchangeIndex ]; + rspHDR->reserved = 0L; // must clear + rspHDR->sof_eof = 0x75000000L; // SOFi3:EOFn no UAM; no CLS, noLCr, no TS + rspHDR->d_id = (InFCHS->s_id | 0x07000000L); // R_CTL= FCP_RSP + rspHDR->s_id = fcChip->Registers.my_al_pa; // CS_CTL = 0 + // TYPE[31-24] 8 for FCP SCSI + // f_ctl[23:0] responder|last seq| xfer S.I. + rspHDR->f_ctl = 0x08910000L; + rspHDR->seq_cnt = 0x03000000; // sequence ID + rspHDR->ox_rx_id = InFCHS->ox_rx_id; // gives us OX_ID + rspHDR->ro = 0x0L; // relative offset (n/a) + + + // Now setup the SEST entry + + pTWE = &fcChip->SEST->u[ *fcExchangeIndex ].TWE; + + // fill out the TWE: + + // VALid entry:Dir outbound:enable CM:enal INT: + pTWE->Seq_Accum = 0xC4000000L; // upper word flags + pTWE->reserved = 0L; + pTWE->Remote_Node_ID = 0L; // no more auto RSP frame! (TL/TS change) + pTWE->Remote_Node_ID |= (InFCHS->s_id << 8); // MS 24 bits Remote_ID + + + // Do we need local or extended gather list? + // depends on size - we can handle 3 len/addr pairs + // locally. + + fcp_dl = build_SEST_sgList( + cpqfcHBAdata->PciDev, + &pTWE->SLen1, + Cmnd, // S/G list + &sgPairs, // return # of pairs in S/G list (from "Data" descriptor) + &fcChip->SEST->sgPages[ *fcExchangeIndex ]);// (for Freeing later) + + + if( !fcp_dl ) // error building S/G list? + { + ulStatus = MEMPOOL_FAIL; + break; // give up + } + + // now that we know the S/G length, build CMND payload + build_FCP_payload( Cmnd, (UCHAR*)&CMDfchs->pl[0], type, fcp_dl ); + + + if( sgPairs > 3 ) // need extended s/g list + pTWE->Buff_Off = 0x00000000; // extended s/g list, no offset + else + pTWE->Buff_Off = 0x80000000; // local data, no offset + + pTWE->Buff_Index = 0; // Buff_Index | Link + pTWE->Exp_RO = 0; + pTWE->Byte_Count = 0; // filled in by TL on err + pTWE->reserved_ = 0; + pTWE->Exp_Byte_Cnt = fcp_dl;// sum of scatter buffers + + break; + + + + + + + case SCSI_TRE: // TachLite Target Read Entry + + // It doesn't make much sense for us to "time-out" a READ, + // but we'll use it for design consistency and internal error recovery. + Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 10; // per SCSI req. + + // I/O request block settings... + *pIRB_flags = 0; // clear IRB flags + // check PRLI (process login) info + // to see if Initiator Requires XFER_RDY + // if not, don't send one! + // { PRLI check...} + IRB_flags.SFA = 0; // don't send XFER_RDY - start data + SfsLen = *pIRB_flags; + + SfsLen <<= 24; // shift flags to MSB + SfsLen += (32L + 12L);// add SFS len (header & XFER_RDY payload) + + + + // now, fill out FCP-DATA header + // (use buffer inside SEST object) + dataHDR = &fcChip->SEST->DataHDR[ *fcExchangeIndex ]; + + dataHDR->reserved = 0L; // must clear + dataHDR->sof_eof = 0x75000000L; // SOFi3:EOFn no UAM; no CLS,noLCr,no TS + dataHDR->d_id = (InFCHS->s_id | 0x01000000L); // R_CTL= FCP_DATA + dataHDR->s_id = fcChip->Registers.my_al_pa; // CS_CTL = 0 + + + // TYPE[31-24] 8 for FCP SCSI + // f_ctl[23:0] exchg responder, not 1st seq, xfer S.I. + // valid RO + dataHDR->f_ctl = 0x08810008L; + dataHDR->seq_cnt = 0x01000000; // sequence ID (no XRDY) + dataHDR->ox_rx_id = InFCHS->ox_rx_id & 0xFFFF0000; // we want upper 16 bits + dataHDR->ro = 0x0L; // relative offset (n/a) + + // now, fill out FCP-RSP header + // (use buffer inside SEST object) + rspHDR = &fcChip->SEST->RspHDR[ *fcExchangeIndex ]; + + rspHDR->reserved = 0L; // must clear + rspHDR->sof_eof = 0x75000000L; // SOFi3:EOFn no UAM; no CLS, noLCr, no TS + rspHDR->d_id = (InFCHS->s_id | 0x07000000L); // R_CTL= FCP_RSP + rspHDR->s_id = fcChip->Registers.my_al_pa; // CS_CTL = 0 + // TYPE[31-24] 8 for FCP SCSI + // f_ctl[23:0] responder|last seq| xfer S.I. + rspHDR->f_ctl = 0x08910000L; + rspHDR->seq_cnt = 0x02000000; // sequence ID: df_ctl: sequence count + + rspHDR->ro = 0x0L; // relative offset (n/a) + + + // Now setup the SEST entry + pTRE = &fcChip->SEST->u[ *fcExchangeIndex ].TRE; + + + // VALid entry:Dir outbound:enable CM:enal INT: + pTRE->Hdr_Len = 0x86010020L; // data frame Len always 32 bytes + pTRE->Hdr_Addr = // bus address of dataHDR; + fcChip->SEST->base + + ((unsigned long)&fcChip->SEST->DataHDR[ *fcExchangeIndex ] - + (unsigned long)fcChip->SEST); + + pTRE->RSP_Len = 64L; // hdr+data (TL assisted RSP frame) + pTRE->RSP_Len |= (InFCHS->s_id << 8); // MS 24 bits Remote_ID + pTRE->RSP_Addr = // bus address of rspHDR + fcChip->SEST->base + + ((unsigned long)&fcChip->SEST->RspHDR[ *fcExchangeIndex ] - + (unsigned long)fcChip->SEST); + + // Do we need local or extended gather list? + // depends on size - we can handle 3 len/addr pairs + // locally. + + fcp_dl = build_SEST_sgList( + cpqfcHBAdata->PciDev, + &pTRE->GLen1, + Cmnd, // S/G list + &sgPairs, // return # of pairs in S/G list (from "Data" descriptor) + &fcChip->SEST->sgPages[ *fcExchangeIndex ]);// (for Freeing later) + + + if( !fcp_dl ) // error building S/G list? + { + ulStatus = MEMPOOL_FAIL; + break; // give up + } + + // no payload or command to build -- READ doesn't need XRDY + + + if( sgPairs > 3 ) // need extended s/g list + pTRE->Buff_Off = 0x78000000L; // extended data | (no offset) + else // local data pointers (in SEST) + pTRE->Buff_Off = 0xf8000000L; // local data | (no offset) + + // ULONG 5 + pTRE->Buff_Index = 0L; // Buff_Index | reserved + pTRE->reserved = 0x0L; // DWord 6 + + // DWord 7: NOTE: zero length will + // hang TachLite! + pTRE->Data_Len = fcp_dl; // e.g. sum of scatter buffers + + pTRE->reserved_ = 0L; // DWord 8 + pTRE->reserved__ = 0L; // DWord 9 + + break; + + + + + + + + case FCP_RESPONSE: + // Target response frame: this sequence uses an OX/RX ID + // pair from a completed SEST exchange. We built most + // of the response frame when we created the TWE/TRE. + + *pIRB_flags = 0; // clear IRB flags + IRB_flags.SFA = 1; // send SFS (RSP) + SfsLen = *pIRB_flags; + + SfsLen <<= 24; // shift flags to MSB + SfsLen += sizeof(TachFCHDR_RSP);// add SFS len (header & RSP payload) + + + Exchanges->fcExchange[ *fcExchangeIndex].type = + FCP_RESPONSE; // change Exchange type to "response" phase + + // take advantage of prior knowledge of OX/RX_ID pair from + // previous XFER outbound frame (still in fchs of exchange) + fcChip->SEST->RspHDR[ *fcExchangeIndex ].ox_rx_id = + CMDfchs->ox_rx_id; + + // Check the status of the DATA phase of the exchange so we can report + // status to the initiator + buildFCPstatus( fcChip, *fcExchangeIndex); // set RSP payload fields + + memcpy( + CMDfchs, // re-use same XFER fchs for Response frame + &fcChip->SEST->RspHDR[ *fcExchangeIndex ], + sizeof( TachFCHDR_RSP )); + + + break; + + default: + printk("cpqfcTS: don't know how to build FC type: %Xh(%d)\n", type,type); + break; + + } + + + + if( !ulStatus) // no errors above? + { + // FCHS is built; now build IRB + + // link the just built FCHS (the "command") to the IRB entry + // for this Exchange. + pIRB = &Exchanges->fcExchange[ *fcExchangeIndex].IRB; + + // len & flags according to command type above + pIRB->Req_A_SFS_Len = SfsLen; // includes IRB flags & len + pIRB->Req_A_SFS_Addr = // TL needs physical addr of frame to send + fcChip->exch_dma_handle + (unsigned long)CMDfchs - + (unsigned long)Exchanges; + + pIRB->Req_A_SFS_D_ID = CMDfchs->d_id << 8; // Dest_ID must be consistent! + + // Exchange is complete except for "fix-up" fields to be set + // at Tachyon Queuing time: + // IRB->Req_A_Trans_ID (OX_ID/ RX_ID): + // for SEST entry, lower bits correspond to actual FC Exchange ID + // fchs->OX_ID or RX_ID + } + else + { +#ifdef DBG + printk( "FC Error: SEST build Pool Allocation failed\n"); +#endif + // return resources... + cpqfcTSCompleteExchange( cpqfcHBAdata->PciDev, fcChip, *fcExchangeIndex); // SEST build failed + } + } + else // no Exchanges available + { + ulStatus = SEST_FULL; + printk( "FC Error: no fcExchanges available\n"); + } + return ulStatus; +} + + + + + + +// set RSP payload fields +static void buildFCPstatus( PTACHYON fcChip, ULONG ExchangeID) +{ + FC_EXCHANGES *Exchanges = fcChip->Exchanges; + FC_EXCHANGE *pExchange = &Exchanges->fcExchange[ExchangeID]; // shorthand + PFCP_STATUS_RESPONSE pFcpStatus; + + memset( &fcChip->SEST->RspHDR[ ExchangeID ].pl, 0, + sizeof( FCP_STATUS_RESPONSE) ); + if( pExchange->status ) // something wrong? + { + pFcpStatus = (PFCP_STATUS_RESPONSE) // cast RSP buffer for this xchng + &fcChip->SEST->RspHDR[ ExchangeID ].pl; + if( pExchange->status & COUNT_ERROR ) + { + + // set FCP response len valid (so we can report count error) + pFcpStatus->fcp_status |= FCP_RSP_LEN_VALID; + pFcpStatus->fcp_rsp_len = 0x04000000; // 4 byte len (BIG Endian) + + pFcpStatus->fcp_rsp_info = FCP_DATA_LEN_NOT_BURST_LEN; // RSP_CODE + } + } +} + + +static dma_addr_t +cpqfc_pci_map_sg_page( + struct pci_dev *pcidev, + ULONG *hw_paddr, // where to put phys addr for HW use + void *sgp_vaddr, // the virtual address of the sg page + dma_addr_t *umap_paddr, // where to put phys addr for unmap + unsigned int *maplen, // where to store sg entry length + int PairCount) // number of sg pairs used in the page. +{ + unsigned long aligned_addr = (unsigned long) sgp_vaddr; + + *maplen = PairCount * 8; + aligned_addr += TL_EXT_SG_PAGE_BYTELEN; + aligned_addr &= ~(TL_EXT_SG_PAGE_BYTELEN -1); + + *umap_paddr = pci_map_single(pcidev, (void *) aligned_addr, + *maplen, PCI_DMA_TODEVICE); + *hw_paddr = (ULONG) *umap_paddr; + +# if BITS_PER_LONG > 32 + if( *umap_paddr >>32 ) { + printk("cqpfcTS:Tach SG DMA addr %p>32 bits\n", + (void*)umap_paddr); + return 0; + } +# endif + return *umap_paddr; +} + +static void +cpqfc_undo_SEST_mappings(struct pci_dev *pcidev, + unsigned long contigaddr, int len, int dir, + struct scatterlist *sgl, int use_sg, + PSGPAGES *sgPages_head, + int allocated_pages) +{ + PSGPAGES i, next; + + if (contigaddr != (unsigned long) NULL) + pci_unmap_single(pcidev, contigaddr, len, dir); + + if (sgl != NULL) + pci_unmap_sg(pcidev, sgl, use_sg, dir); + + for (i=*sgPages_head; i != NULL ;i = next) + { + pci_unmap_single(pcidev, i->busaddr, i->maplen, + scsi_to_pci_dma_dir(PCI_DMA_TODEVICE)); + i->busaddr = (dma_addr_t) NULL; + i->maplen = 0L; + next = i->next; + kfree(i); + } + *sgPages_head = NULL; +} + +// This routine builds scatter/gather lists into SEST entries +// INPUTS: +// SESTalPair - SEST address @DWordA "Local Buffer Length" +// sgList - Scatter/Gather linked list of Len/Address data buffers +// OUTPUT: +// sgPairs - number of valid address/length pairs +// Remarks: +// The SEST data buffer pointers only depend on number of +// length/ address pairs, NOT on the type (IWE, TRE,...) +// Up to 3 pairs can be referenced in the SEST - more than 3 +// require this Extended S/G list page. The page holds 4, 8, 16... +// len/addr pairs, per Scatter/Gather List Page Length Reg. +// TachLite allows pages to be linked to any depth. + +//#define DBG_SEST_SGLIST 1 // for printing out S/G pairs with Ext. pages + +static int ap_hi_water = TL_DANGER_SGPAGES; + +static ULONG build_SEST_sgList( + struct pci_dev *pcidev, + ULONG *SESTalPairStart, // the 3 len/address buffers in SEST + Scsi_Cmnd *Cmnd, + ULONG *sgPairs, + PSGPAGES *sgPages_head) // link list of TL Ext. S/G pages from O/S Pool + +{ + ULONG i, AllocatedPages=0; // Tach Ext. S/G page allocations + ULONG* alPair = SESTalPairStart; + ULONG* ext_sg_page_phys_addr_place = NULL; + int PairCount; + unsigned long ulBuff, contigaddr; + ULONG total_data_len=0; // (in bytes) + ULONG bytes_to_go = Cmnd->request_bufflen; // total xfer (S/G sum) + ULONG thisMappingLen; + struct scatterlist *sgl = NULL; // S/G list (Linux format) + int sg_count, totalsgs; + dma_addr_t busaddr; + unsigned long thislen, offset; + PSGPAGES *sgpage = sgPages_head; + PSGPAGES prev_page = NULL; + +# define WE_HAVE_SG_LIST (sgl != (unsigned long) NULL) + contigaddr = (unsigned long) NULL; + + if( !Cmnd->use_sg ) // no S/G list? + { + if (bytes_to_go <= TL_MAX_SG_ELEM_LEN) + { + *sgPairs = 1; // use "local" S/G pair in SEST entry + // (for now, ignore address bits above #31) + + *alPair++ = bytes_to_go; // bits 18-0, length + + if (bytes_to_go != 0) { + contigaddr = ulBuff = pci_map_single(pcidev, + Cmnd->request_buffer, + Cmnd->request_bufflen, + scsi_to_pci_dma_dir(Cmnd->sc_data_direction)); + // printk("ms %p ", ulBuff); + } + else { + // No data transfer, (e.g.: Test Unit Ready) + // printk("btg=0 "); + *sgPairs = 0; + memset(alPair, 0, sizeof(*alPair)); + return 0; + } + +# if BITS_PER_LONG > 32 + if( ulBuff >>32 ) { + printk("FATAL! Tachyon DMA address %p " + "exceeds 32 bits\n", (void*)ulBuff ); + return 0; + } +# endif + *alPair = (ULONG)ulBuff; + return bytes_to_go; + } + else // We have a single large (too big) contiguous buffer. + { // We will have to break it up. We'll use the scatter + // gather code way below, but use contigaddr instead + // of sg_dma_addr(). (this is a very rare case). + + unsigned long btg; + contigaddr = pci_map_single(pcidev, Cmnd->request_buffer, + Cmnd->request_bufflen, + scsi_to_pci_dma_dir(Cmnd->sc_data_direction)); + + // printk("contigaddr = %p, len = %d\n", + // (void *) contigaddr, bytes_to_go); + totalsgs = 0; + for (btg = bytes_to_go; btg > 0; ) { + btg -= ( btg > TL_MAX_SG_ELEM_LEN ? + TL_MAX_SG_ELEM_LEN : btg ); + totalsgs++; + } + sgl = NULL; + *sgPairs = totalsgs; + } + } + else // we do have a scatter gather list + { + // [TBD - update for Linux to support > 32 bits addressing] + // since the format for local & extended S/G lists is different, + // check if S/G pairs exceeds 3. + // *sgPairs = Cmnd->use_sg; Nope, that's wrong. + + sgl = (struct scatterlist*)Cmnd->request_buffer; + sg_count = pci_map_sg(pcidev, sgl, Cmnd->use_sg, + scsi_to_pci_dma_dir(Cmnd->sc_data_direction)); + if( sg_count <= 3 ) { + + // we need to be careful here that no individual mapping + // is too large, and if any is, that breaking it up + // doesn't push us over 3 sgs, or, if it does, that we + // handle that case. Tachyon can take 0x7FFFF bits for length, + // but sg structure uses "unsigned int", on the face of it, + // up to 0xFFFFFFFF or even more. + + int i; + unsigned long thislen; + + totalsgs = 0; + for (i=0;i= TL_MAX_SG_ELEM_LEN) { + totalsgs++; + thislen -= TL_MAX_SG_ELEM_LEN; + } + if (thislen > 0) totalsgs++; + } + *sgPairs = totalsgs; + } else totalsgs = 999; // as a first estimate, definitely >3, + + // if (totalsgs != sg_count) + // printk("totalsgs = %d, sgcount=%d\n",totalsgs,sg_count); + } + + if( totalsgs <= 3 ) // can (must) use "local" SEST list + { + while( bytes_to_go) + { + offset = 0L; + + if ( WE_HAVE_SG_LIST ) + thisMappingLen = sg_dma_len(sgl); + else // or contiguous buffer? + thisMappingLen = bytes_to_go; + + while (thisMappingLen > 0) + { + thislen = thisMappingLen > TL_MAX_SG_ELEM_LEN ? + TL_MAX_SG_ELEM_LEN : thisMappingLen; + bytes_to_go = bytes_to_go - thislen; + + // we have L/A pair; L = thislen, A = physicalAddress + // load into SEST... + + total_data_len += thislen; + *alPair = thislen; // bits 18-0, length + + alPair++; + + if ( WE_HAVE_SG_LIST ) + ulBuff = sg_dma_address(sgl) + offset; + else + ulBuff = contigaddr + offset; + + offset += thislen; + +# if BITS_PER_LONG > 32 + if( ulBuff >>32 ) { + printk("cqpfcTS: 2Tach DMA address %p > 32 bits\n", + (void*)ulBuff ); + printk("%s = %p, offset = %ld\n", + WE_HAVE_SG_LIST ? "ulBuff" : "contigaddr", + WE_HAVE_SG_LIST ? (void *) ulBuff : (void *) contigaddr, + offset); + return 0; + } +# endif + *alPair++ = (ULONG)ulBuff; // lower 32 bits (31-0) + thisMappingLen -= thislen; + } + + if ( WE_HAVE_SG_LIST ) ++sgl; // next S/G pair + else if (bytes_to_go != 0) printk("BTG not zero!\n"); + +# ifdef DBG_SEST_SGLIST + printk("L=%d ", thisMappingLen); + printk("btg=%d ", bytes_to_go); +# endif + + } + // printk("i:%d\n", *sgPairs); + } + else // more than 3 pairs requires Extended S/G page (Pool Allocation) + { + // clear out SEST DWORDs (local S/G addr) C-F (A-B set in following logic) + for( i=2; i<6; i++) + alPair[i] = 0; + + PairCount = TL_EXT_SG_PAGE_COUNT; // forces initial page allocation + totalsgs = 0; + while( bytes_to_go ) + { + // Per SEST format, we can support 524287 byte lengths per + // S/G pair. Typical user buffers are 4k, and very rarely + // exceed 12k due to fragmentation of physical memory pages. + // However, on certain O/S system (not "user") buffers (on platforms + // with huge memories), it's possible to exceed this + // length in a single S/G address/len mapping, so we have to handle + // that. + + offset = 0L; + if ( WE_HAVE_SG_LIST ) + thisMappingLen = sg_dma_len(sgl); + else + thisMappingLen = bytes_to_go; + + while (thisMappingLen > 0) + { + thislen = thisMappingLen > TL_MAX_SG_ELEM_LEN ? + TL_MAX_SG_ELEM_LEN : thisMappingLen; + // printk("%d/%d/%d\n", thislen, thisMappingLen, bytes_to_go); + + // should we load into "this" extended S/G page, or allocate + // new page? + + if( PairCount >= TL_EXT_SG_PAGE_COUNT ) + { + // Now, we have to map the previous page, (triggering buffer bounce) + // The first time thru the loop, there won't be a previous page. + if (prev_page != NULL) // is there a prev page? + { + // this code is normally kind of hard to trigger, + // you have to use up more than 256 scatter gather + // elements to get here. Cranking down TL_MAX_SG_ELEM_LEN + // to an absurdly low value (128 bytes or so) to artificially + // break i/o's into a zillion pieces is how I tested it. + busaddr = cpqfc_pci_map_sg_page(pcidev, + ext_sg_page_phys_addr_place, + prev_page->page, + &prev_page->busaddr, + &prev_page->maplen, + PairCount); + } + // Allocate the TL Extended S/G list page. We have + // to allocate twice what we want to ensure required TL alignment + // (Tachlite TL/TS User Man. Rev 6.0, p 168) + // We store the original allocated PVOID so we can free later + *sgpage = kmalloc( sizeof(SGPAGES), GFP_ATOMIC); + if ( ! *sgpage ) + { + printk("cpqfc: Allocation failed @ %d S/G page allocations\n", + AllocatedPages); + total_data_len = 0; // failure!! Ext. S/G is All-or-none affair + + // unmap the previous mappings, if any. + + cpqfc_undo_SEST_mappings(pcidev, contigaddr, + Cmnd->request_bufflen, + scsi_to_pci_dma_dir(Cmnd->sc_data_direction), + sgl, Cmnd->use_sg, sgPages_head, AllocatedPages+1); + + // FIXME: testing shows that if we get here, + // it's bad news. (this has been this way for a long + // time though, AFAIK. Not that that excuses it.) + + return 0; // give up (and probably hang the system) + } + // clear out memory we just allocated + memset( (*sgpage)->page,0,TL_EXT_SG_PAGE_BYTELEN*2); + (*sgpage)->next = NULL; + (*sgpage)->busaddr = (dma_addr_t) NULL; + (*sgpage)->maplen = 0L; + + // align the memory - TL requires sizeof() Ext. S/G page alignment. + // We doubled the actual required size so we could mask off LSBs + // to get desired offset + + ulBuff = (unsigned long) (*sgpage)->page; + ulBuff += TL_EXT_SG_PAGE_BYTELEN; + ulBuff &= ~(TL_EXT_SG_PAGE_BYTELEN -1); + + // set pointer, in SEST if first Ext. S/G page, or in last pair + // of linked Ext. S/G pages... (Only 32-bit PVOIDs, so just + // load lower 32 bits) + // NOTE: the Len field must be '0' if this is the first Ext. S/G + // pointer in SEST, and not 0 otherwise (we know thislen != 0). + + *alPair = (alPair != SESTalPairStart) ? thislen : 0; + +# ifdef DBG_SEST_SGLIST + printk("PairCount %d @%p even %Xh, ", + PairCount, alPair, *alPair); +# endif + + // Save the place where we need to store the physical + // address of this scatter gather page which we get when we map it + // (and mapping we can do only after we fill it in.) + alPair++; // next DWORD, will contain phys addr of the ext page + ext_sg_page_phys_addr_place = alPair; + + // Now, set alPair = the virtual addr of the (Extended) S/G page + // which will accept the Len/ PhysicalAddress pairs + alPair = (ULONG *) ulBuff; + + AllocatedPages++; + if (AllocatedPages >= ap_hi_water) + { + // This message should rarely, if ever, come out. + // Previously (cpqfc version <= 2.0.5) the driver would + // just puke if more than 4 SG pages were used, and nobody + // ever complained about that. This only comes out if + // more than 8 pages are used. + + printk(KERN_WARNING + "cpqfc: Possible danger. %d scatter gather pages used.\n" + "cpqfc: detected seemingly extreme memory " + "fragmentation or huge data transfers.\n", + AllocatedPages); + ap_hi_water = AllocatedPages+1; + } + + PairCount = 1; // starting new Ext. S/G page + prev_page = (*sgpage); // remember this page, for next time thru + sgpage = &((*sgpage)->next); + } // end of new TL Ext. S/G page allocation + + *alPair = thislen; // bits 18-0, length (range check above) + +# ifdef DBG_SEST_SGLIST + printk("PairCount %d @%p, even %Xh, ", PairCount, alPair, *alPair); +# endif + + alPair++; // next DWORD, physical address + + if ( WE_HAVE_SG_LIST ) + ulBuff = sg_dma_address(sgl) + offset; + else + ulBuff = contigaddr + offset; + offset += thislen; + +# if BITS_PER_LONG > 32 + if( ulBuff >>32 ) + { + printk("cqpfcTS: 1Tach DMA address %p > 32 bits\n", (void*)ulBuff ); + printk("%s = %p, offset = %ld\n", + WE_HAVE_SG_LIST ? "ulBuff" : "contigaddr", + WE_HAVE_SG_LIST ? (void *) ulBuff : (void *) contigaddr, + offset); + return 0; + } +# endif + + *alPair = (ULONG) ulBuff; // lower 32 bits (31-0) + +# ifdef DBG_SEST_SGLIST + printk("odd %Xh\n", *alPair); +# endif + alPair++; // next DWORD, next address/length pair + + PairCount++; // next Length/Address pair + + // if (PairCount > pc_hi_water) + // { + // printk("pc hi = %d ", PairCount); + // pc_hi_water = PairCount; + // } + bytes_to_go -= thislen; + total_data_len += thislen; + thisMappingLen -= thislen; + totalsgs++; + } // while (thisMappingLen > 0) + if ( WE_HAVE_SG_LIST ) sgl++; // next S/G pair + } // while (bytes_to_go) + + // printk("Totalsgs=%d\n", totalsgs); + *sgPairs = totalsgs; + + // PCI map (and bounce) the last (and usually only) extended SG page + busaddr = cpqfc_pci_map_sg_page(pcidev, + ext_sg_page_phys_addr_place, + prev_page->page, + &prev_page->busaddr, + &prev_page->maplen, + PairCount); + } + return total_data_len; +} + + + +// The Tachlite SEST table is referenced to OX_ID (or RX_ID). To optimize +// performance and debuggability, we index the Exchange structure to FC X_ID +// This enables us to build exchanges for later en-queing to Tachyon, +// provided we have an open X_ID slot. At Tachyon queing time, we only +// need an ERQ slot; then "fix-up" references in the +// IRB, FCHS, etc. as needed. +// RETURNS: +// 0 if successful +// non-zero on error +//sstartex +ULONG cpqfcTSStartExchange( + CPQFCHBA *cpqfcHBAdata, + LONG ExchangeID ) +{ + PTACHYON fcChip = &cpqfcHBAdata->fcChip; + FC_EXCHANGES *Exchanges = fcChip->Exchanges; + FC_EXCHANGE *pExchange = &Exchanges->fcExchange[ ExchangeID ]; // shorthand + USHORT producer, consumer; + ULONG ulStatus=0; + short int ErqIndex; + BOOLEAN CompleteExchange = FALSE; // e.g. ACC replies are complete + BOOLEAN SestType=FALSE; + ULONG InboundData=0; + + // We will manipulate Tachlite chip registers here to successfully + // start exchanges. + + // Check that link is not down -- we can't start an exchange on a + // down link! + + if( fcChip->Registers.FMstatus.value & 0x80) // LPSM offline? + { +printk("fcStartExchange: PSM offline (%Xh), x_ID %Xh, type %Xh, port_id %Xh\n", + fcChip->Registers.FMstatus.value & 0xFF, + ExchangeID, + pExchange->type, + pExchange->fchs.d_id); + + if( ExchangeID >= TACH_SEST_LEN ) // Link Service Outbound frame? + { + // Our most popular LinkService commands are port discovery types + // (PLOGI/ PDISC...), which are implicitly nullified by Link Down + // events, so it makes no sense to Que them. However, ABTS should + // be queued, since exchange sequences are likely destroyed by + // Link Down events, and we want to notify other ports of broken + // sequences by aborting the corresponding exchanges. + if( pExchange->type != BLS_ABTS ) + { + ulStatus = LNKDWN_OSLS; + goto Done; + // don't Que most LinkServ exchanges on LINK DOWN + } + } + + printk("fcStartExchange: Que x_ID %Xh, type %Xh\n", + ExchangeID, pExchange->type); + pExchange->status |= EXCHANGE_QUEUED; + ulStatus = EXCHANGE_QUEUED; + goto Done; + } + + // Make sure ERQ has available space. + + producer = (USHORT)fcChip->ERQ->producerIndex; // copies for logical arith. + consumer = (USHORT)fcChip->ERQ->consumerIndex; + producer++; // We are testing for full que by incrementing + + if( producer >= ERQ_LEN ) // rollover condition? + producer = 0; + if( consumer != producer ) // ERQ not full? + { + // ****************** Need Atomic access to chip registers!!******** + + // remember ERQ PI for copying IRB + ErqIndex = (USHORT)fcChip->ERQ->producerIndex; + fcChip->ERQ->producerIndex = producer; // this is written to Tachyon + // we have an ERQ slot! If SCSI command, need SEST slot + // otherwise we are done. + + // Note that Tachyon requires that bit 15 of the OX_ID or RX_ID be + // set according to direction of data to/from Tachyon for SEST assists. + // For consistency, enforce this rule for Link Service (non-SEST) + // exchanges as well. + + // fix-up the X_ID field in IRB + pExchange->IRB.Req_A_Trans_ID = ExchangeID & 0x7FFF; // 15-bit field + + // fix-up the X_ID field in fchs -- depends on Originator or Responder, + // outgoing or incoming data? + switch( pExchange->type ) + { + // ORIGINATOR types... we're setting our OX_ID and + // defaulting the responder's RX_ID to 0xFFFF + + case SCSI_IRE: + // Requirement: set MSB of x_ID for Incoming TL data + // (see "Tachyon TL/TS User's Manual", Rev 6.0, Sept.'98, pg. 50) + InboundData = 0x8000; + + case SCSI_IWE: + SestType = TRUE; + pExchange->fchs.ox_rx_id = (ExchangeID | InboundData); + pExchange->fchs.ox_rx_id <<= 16; // MSW shift + pExchange->fchs.ox_rx_id |= 0xffff; // add default RX_ID + + // now fix-up the Data HDR OX_ID (TL automatically does rx_id) + // (not necessary for IRE -- data buffer unused) + if( pExchange->type == SCSI_IWE) + { + fcChip->SEST->DataHDR[ ExchangeID ].ox_rx_id = + pExchange->fchs.ox_rx_id; + + } + + break; + + + case FCS_NSR: // ext. link service Name Service Request + case ELS_SCR: // ext. link service State Change Registration + case ELS_FDISC:// ext. link service login + case ELS_FLOGI:// ext. link service login + case ELS_LOGO: // FC-PH extended link service logout + case BLS_NOP: // Basic link service No OPeration + case ELS_PLOGI:// ext. link service login (PLOGI) + case ELS_PDISC:// ext. link service login (PDISC) + case ELS_PRLI: // ext. link service process login + + pExchange->fchs.ox_rx_id = ExchangeID; + pExchange->fchs.ox_rx_id <<= 16; // MSW shift + pExchange->fchs.ox_rx_id |= 0xffff; // and RX_ID + + break; + + + + + // RESPONDER types... we must set our RX_ID while preserving + // sender's OX_ID + // outgoing (or no) data + case ELS_RJT: // extended link service reject + case ELS_LOGO_ACC: // FC-PH extended link service logout accept + case ELS_ACC: // ext. generic link service accept + case ELS_PLOGI_ACC:// ext. link service login accept (PLOGI or PDISC) + case ELS_PRLI_ACC: // ext. link service process login accept + + CompleteExchange = TRUE; // Reply (ACC or RJT) is end of exchange + pExchange->fchs.ox_rx_id |= (ExchangeID & 0xFFFF); + + break; + + + // since we are a Responder, OX_ID should already be set by + // cpqfcTSBuildExchange(). We need to -OR- in RX_ID + case SCSI_TWE: + SestType = TRUE; + // Requirement: set MSB of x_ID for Incoming TL data + // (see "Tachyon TL/TS User's Manual", Rev 6.0, Sept.'98, pg. 50) + + pExchange->fchs.ox_rx_id &= 0xFFFF0000; // clear RX_ID + // Requirement: set MSB of RX_ID for Incoming TL data + // (see "Tachyon TL/TS User's Manual", Rev 6.0, Sept.'98, pg. 50) + pExchange->fchs.ox_rx_id |= (ExchangeID | 0x8000); + break; + + + case SCSI_TRE: + SestType = TRUE; + + // there is no XRDY for SEST target read; the data + // header needs to be updated. Also update the RSP + // exchange IDs for the status frame, in case it is sent automatically + fcChip->SEST->DataHDR[ ExchangeID ].ox_rx_id |= ExchangeID; + fcChip->SEST->RspHDR[ ExchangeID ].ox_rx_id = + fcChip->SEST->DataHDR[ ExchangeID ].ox_rx_id; + + // for easier FCP response logic (works for TWE and TRE), + // copy exchange IDs. (Not needed if TRE 'RSP' bit set) + pExchange->fchs.ox_rx_id = + fcChip->SEST->DataHDR[ ExchangeID ].ox_rx_id; + + break; + + + case FCP_RESPONSE: // using existing OX_ID/ RX_ID pair, + // start SFS FCP-RESPONSE frame + // OX/RX_ID should already be set! (See "fcBuild" above) + CompleteExchange = TRUE; // RSP is end of FCP-SCSI exchange + + + break; + + + case BLS_ABTS_RJT: // uses new RX_ID, since SEST x_ID non-existent + case BLS_ABTS_ACC: // using existing OX_ID/ RX_ID pair from SEST entry + CompleteExchange = TRUE; // ACC or RJT marks end of FCP-SCSI exchange + case BLS_ABTS: // using existing OX_ID/ RX_ID pair from SEST entry + + + break; + + + default: + printk("Error on fcStartExchange: undefined type %Xh(%d)\n", + pExchange->type, pExchange->type); + return INVALID_ARGS; + } + + + // X_ID fields are entered -- copy IRB to Tachyon's ERQ + + + memcpy( + &fcChip->ERQ->QEntry[ ErqIndex ], // dest. + &pExchange->IRB, + 32); // fixed (hardware) length! + + PCI_TRACEO( ExchangeID, 0xA0) + + // ACTION! May generate INT and IMQ entry + writel( fcChip->ERQ->producerIndex, + fcChip->Registers.ERQproducerIndex.address); + + + if( ExchangeID >= TACH_SEST_LEN ) // Link Service Outbound frame? + { + + // wait for completion! (TDB -- timeout and chip reset) + + + PCI_TRACEO( ExchangeID, 0xA4) + + enable_irq( cpqfcHBAdata->HostAdapter->irq); // only way to get Sem. + + down_interruptible( cpqfcHBAdata->TYOBcomplete); + + disable_irq( cpqfcHBAdata->HostAdapter->irq); + PCI_TRACE( 0xA4) + + // On login exchanges, BAD_ALPA (non-existent port_id) results in + // FTO (Frame Time Out) on the Outbound Completion message. + // If we got an FTO status, complete the exchange (free up slot) + if( CompleteExchange || // flag from Reply frames + pExchange->status ) // typically, can get FRAME_TO + { + cpqfcTSCompleteExchange( cpqfcHBAdata->PciDev, fcChip, ExchangeID); + } + } + + else // SEST Exchange + { + ulStatus = 0; // ship & pray success (e.g. FCP-SCSI) + + if( CompleteExchange ) // by Type of exchange (e.g. end-of-xchng) + { + cpqfcTSCompleteExchange( cpqfcHBAdata->PciDev, fcChip, ExchangeID); + } + + else + pExchange->status &= ~EXCHANGE_QUEUED; // clear ExchangeQueued flag + + } + } + + + else // ERQ 'producer' = 'consumer' and QUE is full + { + ulStatus = OUTQUE_FULL; // Outbound (ERQ) Que full + } + +Done: + PCI_TRACE( 0xA0) + return ulStatus; +} + + + + + +// Scan fcController->fcExchanges array for a usuable index (a "free" +// exchange). +// Inputs: +// fcChip - pointer to TachLite chip structure +// Return: +// index - exchange array element where exchange can be built +// -1 - exchange array is full +// REMARKS: +// Although this is a (yuk!) linear search, we presume +// that the system will complete exchanges about as quickly as +// they are submitted. A full Exchange array (and hence, max linear +// search time for free exchange slot) almost guarantees a Fibre problem +// of some sort. +// In the interest of making exchanges easier to debug, we want a LRU +// (Least Recently Used) scheme. + + +static LONG FindFreeExchange( PTACHYON fcChip, ULONG type ) +{ + FC_EXCHANGES *Exchanges = fcChip->Exchanges; + ULONG i; + ULONG ulStatus=-1; // assume failure + + + if( type == SCSI_IRE || + type == SCSI_TRE || + type == SCSI_IWE || + type == SCSI_TWE) + { + // SCSI type - X_IDs should be from 0 to TACH_SEST_LEN-1 + if( fcChip->fcSestExchangeLRU >= TACH_SEST_LEN) // rollover? + fcChip->fcSestExchangeLRU = 0; + i = fcChip->fcSestExchangeLRU; // typically it's already free! + + if( Exchanges->fcExchange[i].type == 0 ) // check for "free" element + { + ulStatus = 0; // success! + } + + else + { // YUK! we need to do a linear search for free element. + // Fragmentation of the fcExchange array is due to excessively + // long completions or timeouts. + + while( TRUE ) + { + if( ++i >= TACH_SEST_LEN ) // rollover check + i = 0; // beginning of SEST X_IDs + +// printk( "looping for SCSI xchng ID: i=%d, type=%Xh\n", +// i, Exchanges->fcExchange[i].type); + + if( Exchanges->fcExchange[i].type == 0 ) // "free"? + { + ulStatus = 0; // success! + break; + } + if( i == fcChip->fcSestExchangeLRU ) // wrapped-around array? + { + printk( "SEST X_ID space full\n"); + break; // failed - prevent inf. loop + } + } + } + fcChip->fcSestExchangeLRU = i + 1; // next! (rollover check next pass) + } + + + + else // Link Service type - X_IDs should be from TACH_SEST_LEN + // to TACH_MAX_XID + { + if( fcChip->fcLsExchangeLRU >= TACH_MAX_XID || // range check + fcChip->fcLsExchangeLRU < TACH_SEST_LEN ) // (e.g. startup) + fcChip->fcLsExchangeLRU = TACH_SEST_LEN; + + i = fcChip->fcLsExchangeLRU; // typically it's already free! + if( Exchanges->fcExchange[i].type == 0 ) // check for "free" element + { + ulStatus = 0; // success! + } + + else + { // YUK! we need to do a linear search for free element + // Fragmentation of the fcExchange array is due to excessively + // long completions or timeouts. + + while( TRUE ) + { + if( ++i >= TACH_MAX_XID ) // rollover check + i = TACH_SEST_LEN;// beginning of Link Service X_IDs + +// printk( "looping for xchng ID: i=%d, type=%Xh\n", +// i, Exchanges->fcExchange[i].type); + + if( Exchanges->fcExchange[i].type == 0 ) // "free"? + { + ulStatus = 0; // success! + break; + } + if( i == fcChip->fcLsExchangeLRU ) // wrapped-around array? + { + printk( "LinkService X_ID space full\n"); + break; // failed - prevent inf. loop + } + } + } + fcChip->fcLsExchangeLRU = i + 1; // next! (rollover check next pass) + + } + + if( !ulStatus ) // success? + Exchanges->fcExchange[i].type = type; // allocate it. + + else + i = -1; // error - all exchanges "open" + + return i; +} + +static void +cpqfc_pci_unmap_extended_sg(struct pci_dev *pcidev, + PTACHYON fcChip, + ULONG x_ID) +{ + // Unmaps the memory regions used to hold the scatter gather lists + + PSGPAGES i; + + // Were there any such regions needing unmapping? + if (! USES_EXTENDED_SGLIST(fcChip->SEST, x_ID)) + return; // No such regions, we're outta here. + + // for each extended scatter gather region needing unmapping... + for (i=fcChip->SEST->sgPages[x_ID] ; i != NULL ; i = i->next) + pci_unmap_single(pcidev, i->busaddr, i->maplen, + scsi_to_pci_dma_dir(PCI_DMA_TODEVICE)); +} + +// Called also from cpqfcTScontrol.o, so can't be static +void +cpqfc_pci_unmap(struct pci_dev *pcidev, + Scsi_Cmnd *cmd, + PTACHYON fcChip, + ULONG x_ID) +{ + // Undo the DMA mappings + if (cmd->use_sg) { // Used scatter gather list for data buffer? + cpqfc_pci_unmap_extended_sg(pcidev, fcChip, x_ID); + pci_unmap_sg(pcidev, cmd->buffer, cmd->use_sg, + scsi_to_pci_dma_dir(cmd->sc_data_direction)); + // printk("umsg %d\n", cmd->use_sg); + } + else if (cmd->request_bufflen) { + // printk("ums %p ", fcChip->SEST->u[ x_ID ].IWE.GAddr1); + pci_unmap_single(pcidev, fcChip->SEST->u[ x_ID ].IWE.GAddr1, + cmd->request_bufflen, + scsi_to_pci_dma_dir(cmd->sc_data_direction)); + } +} + +// We call this routine to free an Exchange for any reason: +// completed successfully, completed with error, aborted, etc. + +// returns FALSE if Exchange failed and "retry" is acceptable +// returns TRUE if Exchange was successful, or retry is impossible +// (e.g. port/device gone). +//scompleteexchange + +void cpqfcTSCompleteExchange( + struct pci_dev *pcidev, + PTACHYON fcChip, + ULONG x_ID) +{ + FC_EXCHANGES *Exchanges = fcChip->Exchanges; + int already_unmapped = 0; + + if( x_ID < TACH_SEST_LEN ) // SEST-based (or LinkServ for FCP exchange) + { + if( Exchanges->fcExchange[ x_ID ].Cmnd == NULL ) // what#@! + { +// TriggerHBA( fcChip->Registers.ReMapMemBase, 0); + printk(" x_ID %Xh, type %Xh, NULL ptr!\n", x_ID, + Exchanges->fcExchange[ x_ID ].type); + + goto CleanUpSestResources; // this path should be very rare. + } + + // we have Linux Scsi Cmnd ptr..., now check our Exchange status + // to decide how to complete this SEST FCP exchange + + if( Exchanges->fcExchange[ x_ID ].status ) // perhaps a Tach indicated problem, + // or abnormal exchange completion + { + // set FCP Link statistics + + if( Exchanges->fcExchange[ x_ID ].status & FC2_TIMEOUT) + fcChip->fcStats.timeouts++; + if( Exchanges->fcExchange[ x_ID ].status & INITIATOR_ABORT) + fcChip->fcStats.FC4aborted++; + if( Exchanges->fcExchange[ x_ID ].status & COUNT_ERROR) + fcChip->fcStats.CntErrors++; + if( Exchanges->fcExchange[ x_ID ].status & LINKFAIL_TX) + fcChip->fcStats.linkFailTX++; + if( Exchanges->fcExchange[ x_ID ].status & LINKFAIL_RX) + fcChip->fcStats.linkFailRX++; + if( Exchanges->fcExchange[ x_ID ].status & OVERFLOW) + fcChip->fcStats.CntErrors++; + + // First, see if the Scsi upper level initiated an ABORT on this + // exchange... + if( Exchanges->fcExchange[ x_ID ].status == INITIATOR_ABORT ) + { + printk(" DID_ABORT, x_ID %Xh, Cmnd %p ", + x_ID, Exchanges->fcExchange[ x_ID ].Cmnd); + goto CleanUpSestResources; // (we don't expect Linux _aborts) + } + + // Did our driver timeout the Exchange, or did Tachyon indicate + // a failure during transmission? Ask for retry with "SOFT_ERROR" + else if( Exchanges->fcExchange[ x_ID ].status & FC2_TIMEOUT) + { +// printk("result DID_SOFT_ERROR, x_ID %Xh, Cmnd %p\n", +// x_ID, Exchanges->fcExchange[ x_ID ].Cmnd); + Exchanges->fcExchange[ x_ID ].Cmnd->result = (DID_SOFT_ERROR <<16); + } + + // Did frame(s) for an open exchange arrive in the SFQ, + // meaning the SEST was unable to process them? + else if( Exchanges->fcExchange[ x_ID ].status & SFQ_FRAME) + { +// printk("result DID_SOFT_ERROR, x_ID %Xh, Cmnd %p\n", +// x_ID, Exchanges->fcExchange[ x_ID ].Cmnd); + Exchanges->fcExchange[ x_ID ].Cmnd->result = (DID_SOFT_ERROR <<16); + } + + // Did our driver timeout the Exchange, or did Tachyon indicate + // a failure during transmission? Ask for retry with "SOFT_ERROR" + else if( + (Exchanges->fcExchange[ x_ID ].status & LINKFAIL_TX) || + (Exchanges->fcExchange[ x_ID ].status & PORTID_CHANGED) || + (Exchanges->fcExchange[ x_ID ].status & FRAME_TO) || + (Exchanges->fcExchange[ x_ID ].status & INV_ENTRY) || + (Exchanges->fcExchange[ x_ID ].status & ABORTSEQ_NOTIFY) ) + + + { +// printk("result DID_SOFT_ERROR, x_ID %Xh, Cmnd %p\n", +// x_ID, Exchanges->fcExchange[ x_ID ].Cmnd); + Exchanges->fcExchange[ x_ID ].Cmnd->result = (DID_SOFT_ERROR <<16); + + + } + + // e.g., a LOGOut happened, or device never logged back in. + else if( Exchanges->fcExchange[ x_ID ].status & DEVICE_REMOVED) + { +// printk(" *LOGOut or timeout on login!* "); + // trigger? +// TriggerHBA( fcChip->Registers.ReMapMemBase, 0); + + Exchanges->fcExchange[ x_ID ].Cmnd->result = (DID_BAD_TARGET <<16); + } + + + // Did Tachyon indicate a CNT error? We need further analysis + // to determine if the exchange is acceptable + else if( Exchanges->fcExchange[ x_ID ].status == COUNT_ERROR) + { + UCHAR ScsiStatus; + FCP_STATUS_RESPONSE *pFcpStatus = + (PFCP_STATUS_RESPONSE)&fcChip->SEST->RspHDR[ x_ID ].pl; + + ScsiStatus = pFcpStatus->fcp_status >>24; + + // If the command is a SCSI Read/Write type, we don't tolerate + // count errors of any kind; assume the count error is due to + // a dropped frame and ask for retry... + + if(( (Exchanges->fcExchange[ x_ID ].Cmnd->cmnd[0] == 0x8) || + (Exchanges->fcExchange[ x_ID ].Cmnd->cmnd[0] == 0x28) || + (Exchanges->fcExchange[ x_ID ].Cmnd->cmnd[0] == 0xA) || + (Exchanges->fcExchange[ x_ID ].Cmnd->cmnd[0] == 0x2A) ) + && + ScsiStatus == 0 ) + { + // ask for retry +/* printk("COUNT_ERROR retry, x_ID %Xh, status %Xh, Cmnd %p\n", + x_ID, Exchanges->fcExchange[ x_ID ].status, + Exchanges->fcExchange[ x_ID ].Cmnd);*/ + Exchanges->fcExchange[ x_ID ].Cmnd->result = (DID_SOFT_ERROR <<16); + } + + else // need more analysis + { + cpqfcTSCheckandSnoopFCP(fcChip, x_ID); // (will set ->result) + } + } + + // default: NOTE! We don't ever want to get here. Getting here + // implies something new is happening that we've never had a test + // case for. Need code maintenance! Return "ERROR" + else + { + unsigned int stat = Exchanges->fcExchange[ x_ID ].status; + printk("DEFAULT result %Xh, x_ID %Xh, Cmnd %p", + Exchanges->fcExchange[ x_ID ].status, x_ID, + Exchanges->fcExchange[ x_ID ].Cmnd); + + if (stat & INVALID_ARGS) printk(" INVALID_ARGS "); + if (stat & LNKDWN_OSLS) printk(" LNKDWN_OSLS "); + if (stat & LNKDWN_LASER) printk(" LNKDWN_LASER "); + if (stat & OUTQUE_FULL) printk(" OUTQUE_FULL "); + if (stat & DRIVERQ_FULL) printk(" DRIVERQ_FULL "); + if (stat & SEST_FULL) printk(" SEST_FULL "); + if (stat & BAD_ALPA) printk(" BAD_ALPA "); + if (stat & OVERFLOW) printk(" OVERFLOW "); + if (stat & COUNT_ERROR) printk(" COUNT_ERROR "); + if (stat & LINKFAIL_RX) printk(" LINKFAIL_RX "); + if (stat & ABORTSEQ_NOTIFY) printk(" ABORTSEQ_NOTIFY "); + if (stat & LINKFAIL_TX) printk(" LINKFAIL_TX "); + if (stat & HOSTPROG_ERR) printk(" HOSTPROG_ERR "); + if (stat & FRAME_TO) printk(" FRAME_TO "); + if (stat & INV_ENTRY) printk(" INV_ENTRY "); + if (stat & SESTPROG_ERR) printk(" SESTPROG_ERR "); + if (stat & OUTBOUND_TIMEOUT) printk(" OUTBOUND_TIMEOUT "); + if (stat & INITIATOR_ABORT) printk(" INITIATOR_ABORT "); + if (stat & MEMPOOL_FAIL) printk(" MEMPOOL_FAIL "); + if (stat & FC2_TIMEOUT) printk(" FC2_TIMEOUT "); + if (stat & TARGET_ABORT) printk(" TARGET_ABORT "); + if (stat & EXCHANGE_QUEUED) printk(" EXCHANGE_QUEUED "); + if (stat & PORTID_CHANGED) printk(" PORTID_CHANGED "); + if (stat & DEVICE_REMOVED) printk(" DEVICE_REMOVED "); + if (stat & SFQ_FRAME) printk(" SFQ_FRAME "); + printk("\n"); + + Exchanges->fcExchange[ x_ID ].Cmnd->result = (DID_ERROR <<16); + } + } + else // definitely no Tach problem, but perhaps an FCP problem + { + // set FCP Link statistic + fcChip->fcStats.ok++; + cpqfcTSCheckandSnoopFCP( fcChip, x_ID); // (will set ->result) + } + + cpqfc_pci_unmap(pcidev, Exchanges->fcExchange[x_ID].Cmnd, + fcChip, x_ID); // undo DMA mappings. + already_unmapped = 1; + + // OK, we've set the Scsi "->result" field, so proceed with calling + // Linux Scsi "done" (if not NULL), and free any kernel memory we + // may have allocated for the exchange. + + PCI_TRACEO( (ULONG)Exchanges->fcExchange[x_ID].Cmnd, 0xAC); + // complete the command back to upper Scsi drivers + if( Exchanges->fcExchange[ x_ID ].Cmnd->scsi_done != NULL) + { + // Calling "done" on an Linux _abort() aborted + // Cmnd causes a kernel panic trying to re-free mem. + // Actually, we shouldn't do anything with an _abort CMND + if( Exchanges->fcExchange[ x_ID ].Cmnd->result != (DID_ABORT<<16) ) + { + PCI_TRACE(0xAC) + call_scsi_done(Exchanges->fcExchange[ x_ID ].Cmnd); + } + else + { +// printk(" not calling scsi_done on x_ID %Xh, Cmnd %p\n", +// x_ID, Exchanges->fcExchange[ x_ID ].Cmnd); + } + } + else{ + printk(" x_ID %Xh, type %Xh, Cdb0 %Xh\n", x_ID, + Exchanges->fcExchange[ x_ID ].type, + Exchanges->fcExchange[ x_ID ].Cmnd->cmnd[0]); + printk(" cpqfcTS: Null scsi_done function pointer!\n"); + } + + + // Now, clean up non-Scsi_Cmnd items... +CleanUpSestResources: + + if (!already_unmapped) + cpqfc_pci_unmap(pcidev, Exchanges->fcExchange[x_ID].Cmnd, + fcChip, x_ID); // undo DMA mappings. + + // Was an Extended Scatter/Gather page allocated? We know + // this by checking DWORD 4, bit 31 ("LOC") of SEST entry + if( !(fcChip->SEST->u[ x_ID ].IWE.Buff_Off & 0x80000000)) + { + PSGPAGES p, next; + + // extended S/G list was used -- Free the allocated ext. S/G pages + for (p = fcChip->SEST->sgPages[x_ID]; p != NULL; p = next) { + next = p->next; + kfree(p); + } + fcChip->SEST->sgPages[x_ID] = NULL; + } + + Exchanges->fcExchange[ x_ID ].Cmnd = NULL; + } // Done with FCP (SEST) exchanges + + + // the remaining logic is common to ALL Exchanges: + // FCP(SEST) and LinkServ. + + Exchanges->fcExchange[ x_ID ].type = 0; // there -- FREE! + Exchanges->fcExchange[ x_ID ].status = 0; + + PCI_TRACEO( x_ID, 0xAC) + + + return; +} // (END of CompleteExchange function) + + + + +// Unfortunately, we must snoop all command completions in +// order to manipulate certain return fields, and take note of +// device types, etc., to facilitate the Fibre-Channel to SCSI +// "mapping". +// (Watch for BIG Endian confusion on some payload fields) +void cpqfcTSCheckandSnoopFCP( PTACHYON fcChip, ULONG x_ID) +{ + FC_EXCHANGES *Exchanges = fcChip->Exchanges; + Scsi_Cmnd *Cmnd = Exchanges->fcExchange[ x_ID].Cmnd; + FCP_STATUS_RESPONSE *pFcpStatus = + (PFCP_STATUS_RESPONSE)&fcChip->SEST->RspHDR[ x_ID ].pl; + UCHAR ScsiStatus; + + ScsiStatus = pFcpStatus->fcp_status >>24; + +#ifdef FCP_COMPLETION_DBG + printk("ScsiStatus = 0x%X\n", ScsiStatus); +#endif + + // First, check FCP status + if( pFcpStatus->fcp_status & FCP_RSP_LEN_VALID ) + { + // check response code (RSP_CODE) -- most popular is bad len + // 1st 4 bytes of rsp info -- only byte 3 interesting + if( pFcpStatus->fcp_rsp_info & FCP_DATA_LEN_NOT_BURST_LEN ) + { + + // do we EVER get here? + printk("cpqfcTS: FCP data len not burst len, x_ID %Xh\n", x_ID); + } + } + + // for now, go by the ScsiStatus, and manipulate certain + // commands when necessary... + if( ScsiStatus == 0) // SCSI status byte "good"? + { + Cmnd->result = 0; // everything's OK + + if( (Cmnd->cmnd[0] == INQUIRY)) + { + UCHAR *InquiryData = Cmnd->request_buffer; + PFC_LOGGEDIN_PORT pLoggedInPort; + + // We need to manipulate INQUIRY + // strings for COMPAQ RAID controllers to force + // Linux to scan additional LUNs. Namely, set + // the Inquiry string byte 2 (ANSI-approved version) + // to 2. + + if( !memcmp( &InquiryData[8], "COMPAQ", 6 )) + { + InquiryData[2] = 0x2; // claim SCSI-2 compliance, + // so multiple LUNs may be scanned. + // (no SCSI-2 problems known in CPQ) + } + + // snoop the Inquiry to detect Disk, Tape, etc. type + // (search linked list for the port_id we sent INQUIRY to) + pLoggedInPort = fcFindLoggedInPort( fcChip, + NULL, // DON'T search Scsi Nexus (we will set it) + Exchanges->fcExchange[ x_ID].fchs.d_id & 0xFFFFFF, + NULL, // DON'T search linked list for FC WWN + NULL); // DON'T care about end of list + + if( pLoggedInPort ) + { + pLoggedInPort->ScsiNexus.InqDeviceType = InquiryData[0]; + } + else + { + printk("cpqfcTS: can't find LoggedIn FC port %06X for INQUIRY\n", + Exchanges->fcExchange[ x_ID].fchs.d_id & 0xFFFFFF); + } + } + } + + + // Scsi Status not good -- pass it back to caller + + else + { + Cmnd->result = ScsiStatus; // SCSI status byte is 1st + + // check for valid "sense" data + + if( pFcpStatus->fcp_status & FCP_SNS_LEN_VALID ) + { // limit Scsi Sense field length! + int SenseLen = pFcpStatus->fcp_sns_len >>24; // (BigEndian) lower byte + + SenseLen = SenseLen > sizeof( Cmnd->sense_buffer) ? + sizeof( Cmnd->sense_buffer) : SenseLen; + + +#ifdef FCP_COMPLETION_DBG + printk("copy sense_buffer %p, len %d, result %Xh\n", + Cmnd->sense_buffer, SenseLen, Cmnd->result); +#endif + + // NOTE: There is some dispute over the FCP response + // format. Most FC devices assume that FCP_RSP_INFO + // is 8 bytes long, in spite of the fact that FCP_RSP_LEN + // is (virtually) always 0 and the field is "invalid". + // Some other devices assume that + // the FCP_SNS_INFO begins after FCP_RSP_LEN bytes (i.e. 0) + // when the FCP_RSP is invalid (this almost appears to be + // one of those "religious" issues). + // Consequently, we test the usual position of FCP_SNS_INFO + // for 7Xh, since the SCSI sense format says the first + // byte ("error code") should be 0x70 or 0x71. In practice, + // we find that every device does in fact have 0x70 or 0x71 + // in the first byte position, so this test works for all + // FC devices. + // (This logic is especially effective for the CPQ/DEC HSG80 + // & HSG60 controllers). + + if( (pFcpStatus->fcp_sns_info[0] & 0x70) == 0x70 ) + memcpy( Cmnd->sense_buffer, + &pFcpStatus->fcp_sns_info[0], SenseLen); + else + { + unsigned char *sbPtr = + (unsigned char *)&pFcpStatus->fcp_sns_info[0]; + sbPtr -= 8; // back up 8 bytes hoping to find the + // start of the sense buffer + memcpy( Cmnd->sense_buffer, sbPtr, SenseLen); + } + + // in the special case of Device Reset, tell upper layer + // to immediately retry (with SOFT_ERROR status) + // look for Sense Key Unit Attention (0x6) with ASC Device + // Reset (0x29) + // printk("SenseLen %d, Key = 0x%X, ASC = 0x%X\n", + // SenseLen, Cmnd->sense_buffer[2], + // Cmnd->sense_buffer[12]); + if( ((Cmnd->sense_buffer[2] & 0xF) == 0x6) && + (Cmnd->sense_buffer[12] == 0x29) ) // Sense Code "reset" + { + Cmnd->result |= (DID_SOFT_ERROR << 16); // "Host" status byte 3rd + } + + // check for SenseKey "HARDWARE ERROR", ASC InternalTargetFailure + else if( ((Cmnd->sense_buffer[2] & 0xF) == 0x4) && // "hardware error" + (Cmnd->sense_buffer[12] == 0x44) ) // Addtl. Sense Code + { +// printk("HARDWARE_ERROR, Channel/Target/Lun %d/%d/%d\n", +// Cmnd->channel, Cmnd->target, Cmnd->lun); + Cmnd->result |= (DID_ERROR << 16); // "Host" status byte 3rd + } + + } // (end of sense len valid) + + // there is no sense data to help out Linux's Scsi layers... + // We'll just return the Scsi status and hope he will "do the + // right thing" + else + { + // as far as we know, the Scsi status is sufficient + Cmnd->result |= (DID_OK << 16); // "Host" status byte 3rd + } + } +} + + + +//PPPPPPPPPPPPPPPPPPPPPPPPP PAYLOAD PPPPPPPPP +// build data PAYLOAD; SCSI FCP_CMND I.U. +// remember BIG ENDIAN payload - DWord values must be byte-reversed +// (hence the affinity for byte pointer building). + +static int build_FCP_payload( Scsi_Cmnd *Cmnd, + UCHAR* payload, ULONG type, ULONG fcp_dl ) +{ + int i; + + + switch( type) + { + + case SCSI_IWE: + case SCSI_IRE: + // 8 bytes FCP_LUN + // Peripheral Device or Volume Set addressing, and LUN mapping + // When the FC port was looked up, we copied address mode + // and any LUN mask to the scratch pad SCp.phase & .mode + + *payload++ = (UCHAR)Cmnd->SCp.phase; + + // Now, because of "lun masking" + // (aka selective storage presentation), + // the contiguous Linux Scsi lun number may not match the + // device's lun number, so we may have to "map". + + *payload++ = (UCHAR)Cmnd->SCp.have_data_in; + + // We don't know of anyone in the FC business using these + // extra "levels" of addressing. In fact, confusion still exists + // just using the FIRST level... ;-) + + *payload++ = 0; // 2nd level addressing + *payload++ = 0; + *payload++ = 0; // 3rd level addressing + *payload++ = 0; + *payload++ = 0; // 4th level addressing + *payload++ = 0; + + // 4 bytes Control Field FCP_CNTL + *payload++ = 0; // byte 0: (MSB) reserved + *payload++ = 0; // byte 1: task codes + + // byte 2: task management flags + // another "use" of the spare field to accomplish TDR + // note combination needed + if( (Cmnd->cmnd[0] == RELEASE) && + (Cmnd->SCp.buffers_residual == FCP_TARGET_RESET) ) + { + Cmnd->cmnd[0] = 0; // issue "Test Unit Ready" for TDR + *payload++ = 0x20; // target device reset bit + } + else + *payload++ = 0; // no TDR + // byte 3: (LSB) execution management codes + // bit 0 write, bit 1 read (don't set together) + + if( fcp_dl != 0 ) + { + if( type == SCSI_IWE ) // WRITE + *payload++ = 1; + else // READ + *payload++ = 2; + } + else + { + // On some devices, if RD or WR bits are set, + // and fcp_dl is 0, they will generate an error on the command. + // (i.e., if direction is specified, they insist on a length). + *payload++ = 0; // no data (necessary for CPQ) + } + + + // NOTE: clean this up if/when MAX_COMMAND_SIZE is increased to 16 + // FCP_CDB allows 16 byte SCSI command descriptor blk; + // Linux SCSI CDB array is MAX_COMMAND_SIZE (12 at this time...) + for( i=0; (i < Cmnd->cmd_len) && i < MAX_COMMAND_SIZE; i++) + *payload++ = Cmnd->cmnd[i]; + + // if( Cmnd->cmd_len == 16 ) + // { + // memcpy( payload, &Cmnd->SCp.buffers_residual, 4); + // } + payload+= (16 - i); + + // FCP_DL is largest number of expected data bytes + // per CDB (i.e. read/write command) + *payload++ = (UCHAR)(fcp_dl >>24); // (MSB) 8 bytes data len FCP_DL + *payload++ = (UCHAR)(fcp_dl >>16); + *payload++ = (UCHAR)(fcp_dl >>8); + *payload++ = (UCHAR)fcp_dl; // (LSB) + break; + + case SCSI_TWE: // need FCP_XFER_RDY + *payload++ = 0; // (4 bytes) DATA_RO (MSB byte 0) + *payload++ = 0; + *payload++ = 0; + *payload++ = 0; // LSB (byte 3) + // (4 bytes) BURST_LEN + // size of following FCP_DATA payload + *payload++ = (UCHAR)(fcp_dl >>24); // (MSB) 8 bytes data len FCP_DL + *payload++ = (UCHAR)(fcp_dl >>16); + *payload++ = (UCHAR)(fcp_dl >>8); + *payload++ = (UCHAR)fcp_dl; // (LSB) + // 4 bytes RESERVED + *payload++ = 0; + *payload++ = 0; + *payload++ = 0; + *payload++ = 0; + break; + + default: + break; + } + + return 0; +} + -- cgit v1.2.3