From f6dd337ee4c440f29a873da3779eb3af44bd1623 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 1 May 2008 14:49:59 -0700 Subject: [SCSI] scsi_dh: add hp sw device handler This patch provides the device handler to support the older hp boxes which cannot be upgraded. Signed-off-by: Mike Christie Signed-off-by: Chandra Seetharaman Signed-off-by: James Bottomley --- drivers/scsi/device_handler/Kconfig | 8 ++ drivers/scsi/device_handler/Makefile | 1 + drivers/scsi/device_handler/scsi_dh_hp_sw.c | 202 ++++++++++++++++++++++++++++ 3 files changed, 211 insertions(+) create mode 100644 drivers/scsi/device_handler/scsi_dh_hp_sw.c (limited to 'drivers/scsi/device_handler') diff --git a/drivers/scsi/device_handler/Kconfig b/drivers/scsi/device_handler/Kconfig index 404f3773262..61578d84fa6 100644 --- a/drivers/scsi/device_handler/Kconfig +++ b/drivers/scsi/device_handler/Kconfig @@ -16,3 +16,11 @@ config SCSI_DH_RDAC depends on SCSI_DH help If you have a LSI RDAC select y. Otherwise, say N. + +config SCSI_DH_HP_SW + tristate "HP/COMPAQ MSA Device Handler" + depends on SCSI_DH + help + If you have a HP/COMPAQ MSA device that requires START_STOP to + be sent to start it and cannot upgrade the firmware then select y. + Otherwise, say N. diff --git a/drivers/scsi/device_handler/Makefile b/drivers/scsi/device_handler/Makefile index 1a42b349831..08ec1943f19 100644 --- a/drivers/scsi/device_handler/Makefile +++ b/drivers/scsi/device_handler/Makefile @@ -3,3 +3,4 @@ # obj-$(CONFIG_SCSI_DH) += scsi_dh.o obj-$(CONFIG_SCSI_DH_RDAC) += scsi_dh_rdac.o +obj-$(CONFIG_SCSI_DH_HP_SW) += scsi_dh_hp_sw.o diff --git a/drivers/scsi/device_handler/scsi_dh_hp_sw.c b/drivers/scsi/device_handler/scsi_dh_hp_sw.c new file mode 100644 index 00000000000..12ceab7b366 --- /dev/null +++ b/drivers/scsi/device_handler/scsi_dh_hp_sw.c @@ -0,0 +1,202 @@ +/* + * Basic HP/COMPAQ MSA 1000 support. This is only needed if your HW cannot be + * upgraded. + * + * Copyright (C) 2006 Red Hat, Inc. All rights reserved. + * Copyright (C) 2006 Mike Christie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include + +#define HP_SW_NAME "hp_sw" + +#define HP_SW_TIMEOUT (60 * HZ) +#define HP_SW_RETRIES 3 + +struct hp_sw_dh_data { + unsigned char sense[SCSI_SENSE_BUFFERSIZE]; + int retries; +}; + +static inline struct hp_sw_dh_data *get_hp_sw_data(struct scsi_device *sdev) +{ + struct scsi_dh_data *scsi_dh_data = sdev->scsi_dh_data; + BUG_ON(scsi_dh_data == NULL); + return ((struct hp_sw_dh_data *) scsi_dh_data->buf); +} + +static int hp_sw_done(struct scsi_device *sdev) +{ + struct hp_sw_dh_data *h = get_hp_sw_data(sdev); + struct scsi_sense_hdr sshdr; + int rc; + + sdev_printk(KERN_INFO, sdev, "hp_sw_done\n"); + + rc = scsi_normalize_sense(h->sense, SCSI_SENSE_BUFFERSIZE, &sshdr); + if (!rc) + goto done; + switch (sshdr.sense_key) { + case NOT_READY: + if ((sshdr.asc == 0x04) && (sshdr.ascq == 3)) { + rc = SCSI_DH_RETRY; + h->retries++; + break; + } + /* fall through */ + default: + h->retries++; + rc = SCSI_DH_IMM_RETRY; + } + +done: + if (rc == SCSI_DH_OK || rc == SCSI_DH_IO) + h->retries = 0; + else if (h->retries > HP_SW_RETRIES) { + h->retries = 0; + rc = SCSI_DH_IO; + } + return rc; +} + +static int hp_sw_activate(struct scsi_device *sdev) +{ + struct hp_sw_dh_data *h = get_hp_sw_data(sdev); + struct request *req; + int ret = SCSI_DH_RES_TEMP_UNAVAIL; + + req = blk_get_request(sdev->request_queue, WRITE, GFP_ATOMIC); + if (!req) + goto done; + + sdev_printk(KERN_INFO, sdev, "sending START_STOP."); + + req->cmd_type = REQ_TYPE_BLOCK_PC; + req->cmd_flags |= REQ_FAILFAST; + req->cmd_len = COMMAND_SIZE(START_STOP); + memset(req->cmd, 0, MAX_COMMAND_SIZE); + req->cmd[0] = START_STOP; + req->cmd[4] = 1; /* Start spin cycle */ + req->timeout = HP_SW_TIMEOUT; + req->sense = h->sense; + memset(req->sense, 0, SCSI_SENSE_BUFFERSIZE); + req->sense_len = 0; + + ret = blk_execute_rq(req->q, NULL, req, 1); + if (!ret) /* SUCCESS */ + ret = hp_sw_done(sdev); + else + ret = SCSI_DH_IO; +done: + return ret; +} + +static const struct { + char *vendor; + char *model; +} hp_sw_dh_data_list[] = { + {"COMPAQ", "MSA"}, + {"HP", "HSV"}, + {"DEC", "HSG80"}, + {NULL, NULL}, +}; + +static int hp_sw_bus_notify(struct notifier_block *, unsigned long, void *); + +static struct scsi_device_handler hp_sw_dh = { + .name = HP_SW_NAME, + .module = THIS_MODULE, + .nb.notifier_call = hp_sw_bus_notify, + .activate = hp_sw_activate, +}; + +static int hp_sw_bus_notify(struct notifier_block *nb, + unsigned long action, void *data) +{ + struct device *dev = data; + struct scsi_device *sdev = to_scsi_device(dev); + struct scsi_dh_data *scsi_dh_data; + int i, found = 0; + unsigned long flags; + + if (action == BUS_NOTIFY_ADD_DEVICE) { + for (i = 0; hp_sw_dh_data_list[i].vendor; i++) { + if (!strncmp(sdev->vendor, hp_sw_dh_data_list[i].vendor, + strlen(hp_sw_dh_data_list[i].vendor)) && + !strncmp(sdev->model, hp_sw_dh_data_list[i].model, + strlen(hp_sw_dh_data_list[i].model))) { + found = 1; + break; + } + } + if (!found) + goto out; + + scsi_dh_data = kzalloc(sizeof(struct scsi_device_handler *) + + sizeof(struct hp_sw_dh_data) , GFP_KERNEL); + if (!scsi_dh_data) { + sdev_printk(KERN_ERR, sdev, "Attach Failed %s.\n", + HP_SW_NAME); + goto out; + } + + scsi_dh_data->scsi_dh = &hp_sw_dh; + spin_lock_irqsave(sdev->request_queue->queue_lock, flags); + sdev->scsi_dh_data = scsi_dh_data; + spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags); + try_module_get(THIS_MODULE); + + sdev_printk(KERN_NOTICE, sdev, "Attached %s.\n", HP_SW_NAME); + } else if (action == BUS_NOTIFY_DEL_DEVICE) { + if (sdev->scsi_dh_data == NULL || + sdev->scsi_dh_data->scsi_dh != &hp_sw_dh) + goto out; + + spin_lock_irqsave(sdev->request_queue->queue_lock, flags); + scsi_dh_data = sdev->scsi_dh_data; + sdev->scsi_dh_data = NULL; + spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags); + module_put(THIS_MODULE); + + sdev_printk(KERN_NOTICE, sdev, "Dettached %s.\n", HP_SW_NAME); + + kfree(scsi_dh_data); + } + +out: + return 0; +} + +static int __init hp_sw_init(void) +{ + return scsi_register_device_handler(&hp_sw_dh); +} + +static void __exit hp_sw_exit(void) +{ + scsi_unregister_device_handler(&hp_sw_dh); +} + +module_init(hp_sw_init); +module_exit(hp_sw_exit); + +MODULE_DESCRIPTION("HP MSA 1000"); +MODULE_AUTHOR("Mike Christie