From 8bf62ecee58360749c5f0e68bc97d5e02a6816b1 Mon Sep 17 00:00:00 2001
From: Albert Lee <albertcc@tw.ibm.com>
Date: Thu, 12 May 2005 15:29:42 -0400
Subject: [libata] C/H/S support, for older devices

---
 drivers/scsi/libata-core.c | 140 +++++++++++++++++++++++++++++++++++++--------
 1 file changed, 115 insertions(+), 25 deletions(-)

(limited to 'drivers/scsi/libata-core.c')

diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 0b5d3a5b7ed..96355b05fe5 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -52,6 +52,7 @@
 static unsigned int ata_busy_sleep (struct ata_port *ap,
 				    unsigned long tmout_pat,
 			    	    unsigned long tmout);
+static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev);
 static void ata_set_mode(struct ata_port *ap);
 static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev);
 static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift);
@@ -1008,7 +1009,7 @@ static inline void ata_dump_id(struct ata_device *dev)
 static void ata_dev_identify(struct ata_port *ap, unsigned int device)
 {
 	struct ata_device *dev = &ap->device[device];
-	unsigned int i;
+	unsigned int major_version;
 	u16 tmp;
 	unsigned long xfer_modes;
 	u8 status;
@@ -1106,9 +1107,9 @@ retry:
 	 * common ATA, ATAPI feature tests
 	 */
 
-	/* we require LBA and DMA support (bits 8 & 9 of word 49) */
-	if (!ata_id_has_dma(dev->id) || !ata_id_has_lba(dev->id)) {
-		printk(KERN_DEBUG "ata%u: no dma/lba\n", ap->id);
+	/* we require DMA support (bits 8 of word 49) */
+	if (!ata_id_has_dma(dev->id)) {
+		printk(KERN_DEBUG "ata%u: no dma\n", ap->id);
 		goto err_out_nosup;
 	}
 
@@ -1128,32 +1129,69 @@ retry:
 		if (!ata_id_is_ata(dev->id))	/* sanity check */
 			goto err_out_nosup;
 
+		/* get major version */
 		tmp = dev->id[ATA_ID_MAJOR_VER];
-		for (i = 14; i >= 1; i--)
-			if (tmp & (1 << i))
+		for (major_version = 14; major_version >= 1; major_version--)
+			if (tmp & (1 << major_version))
 				break;
 
-		/* we require at least ATA-3 */
-		if (i < 3) {
-			printk(KERN_DEBUG "ata%u: no ATA-3\n", ap->id);
-			goto err_out_nosup;
-		}
+		/*
+		 * The exact sequence expected by certain pre-ATA4 drives is:
+		 * SRST RESET
+		 * IDENTIFY
+		 * INITIALIZE DEVICE PARAMETERS
+		 * anything else..
+		 * Some drives were very specific about that exact sequence.
+		 */
+		if (major_version < 4 || (!ata_id_has_lba(dev->id)))
+			ata_dev_init_params(ap, dev);
+
+		if (ata_id_has_lba(dev->id)) {
+			dev->flags |= ATA_DFLAG_LBA;
+
+			if (ata_id_has_lba48(dev->id)) {
+				dev->flags |= ATA_DFLAG_LBA48;
+				dev->n_sectors = ata_id_u64(dev->id, 100);
+			} else {
+				dev->n_sectors = ata_id_u32(dev->id, 60);
+			}
+
+			/* print device info to dmesg */
+			printk(KERN_INFO "ata%u: dev %u ATA-%d, max %s, %Lu sectors:%s\n",
+			       ap->id, device,
+			       major_version,
+			       ata_mode_string(xfer_modes),
+			       (unsigned long long)dev->n_sectors,
+			       dev->flags & ATA_DFLAG_LBA48 ? " LBA48" : " LBA");
+		} else { 
+			/* CHS */
+
+			/* Default translation */
+			dev->cylinders	= dev->id[1];
+			dev->heads	= dev->id[3];
+			dev->sectors	= dev->id[6];
+			dev->n_sectors	= dev->cylinders * dev->heads * dev->sectors;
+
+			if (ata_id_current_chs_valid(dev->id)) {
+				/* Current CHS translation is valid. */
+				dev->cylinders = dev->id[54];
+				dev->heads     = dev->id[55];
+				dev->sectors   = dev->id[56];
+				
+				dev->n_sectors = ata_id_u32(dev->id, 57);
+			}
+
+			/* print device info to dmesg */
+			printk(KERN_INFO "ata%u: dev %u ATA-%d, max %s, %Lu sectors: CHS %d/%d/%d\n",
+			       ap->id, device,
+			       major_version,
+			       ata_mode_string(xfer_modes),
+			       (unsigned long long)dev->n_sectors,
+			       (int)dev->cylinders, (int)dev->heads, (int)dev->sectors);
 
-		if (ata_id_has_lba48(dev->id)) {
-			dev->flags |= ATA_DFLAG_LBA48;
-			dev->n_sectors = ata_id_u64(dev->id, 100);
-		} else {
-			dev->n_sectors = ata_id_u32(dev->id, 60);
 		}
 
 		ap->host->max_cmd_len = 16;
-
-		/* print device info to dmesg */
-		printk(KERN_INFO "ata%u: dev %u ATA, max %s, %Lu sectors:%s\n",
-		       ap->id, device,
-		       ata_mode_string(xfer_modes),
-		       (unsigned long long)dev->n_sectors,
-		       dev->flags & ATA_DFLAG_LBA48 ? " lba48" : "");
 	}
 
 	/* ATAPI-specific feature tests */
@@ -1946,6 +1984,54 @@ static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev)
 	DPRINTK("EXIT\n");
 }
 
+/**
+ *	ata_dev_init_params - Issue INIT DEV PARAMS command
+ *	@ap: Port associated with device @dev
+ *	@dev: Device to which command will be sent
+ *
+ *	LOCKING:
+ */
+
+static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev)
+{
+	DECLARE_COMPLETION(wait);
+	struct ata_queued_cmd *qc;
+	int rc;
+	unsigned long flags;
+	u16 sectors = dev->id[6];
+	u16 heads   = dev->id[3];
+
+	/* Number of sectors per track 1-255. Number of heads 1-16 */
+	if (sectors < 1 || sectors > 255 || heads < 1 || heads > 16)
+		return;
+
+	/* set up init dev params taskfile */
+	DPRINTK("init dev params \n");
+
+	qc = ata_qc_new_init(ap, dev);
+	BUG_ON(qc == NULL);
+
+	qc->tf.command = ATA_CMD_INIT_DEV_PARAMS;
+	qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+	qc->tf.protocol = ATA_PROT_NODATA;
+	qc->tf.nsect = sectors;
+	qc->tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */
+
+	qc->waiting = &wait;
+	qc->complete_fn = ata_qc_complete_noop;
+
+	spin_lock_irqsave(&ap->host_set->lock, flags);
+	rc = ata_qc_issue(qc);
+	spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+	if (rc)
+		ata_port_disable(ap);
+	else
+		wait_for_completion(&wait);
+
+	DPRINTK("EXIT\n");
+}
+
 /**
  *	ata_sg_clean -
  *	@qc:
@@ -2736,8 +2822,12 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap,
 
 		ata_tf_init(ap, &qc->tf, dev->devno);
 
-		if (dev->flags & ATA_DFLAG_LBA48)
-			qc->tf.flags |= ATA_TFLAG_LBA48;
+		if (dev->flags & ATA_DFLAG_LBA) {
+			qc->tf.flags |= ATA_TFLAG_LBA;
+
+			if (dev->flags & ATA_DFLAG_LBA48)
+				qc->tf.flags |= ATA_TFLAG_LBA48;
+		}
 	}
 
 	return qc;
-- 
cgit v1.2.3


From ee500aabf10323a7e313731b8c0be7c2c6dd27c7 Mon Sep 17 00:00:00 2001
From: Albert Lee <albertcc@tw.ibm.com>
Date: Tue, 27 Sep 2005 17:34:38 +0800
Subject: [PATCH] libata: indent and whitespace change

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
---
 drivers/scsi/libata-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/scsi/libata-core.c')

diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index e5b01997117..cc68f5706ac 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -3586,7 +3586,7 @@ u8 ata_bmdma_status(struct ata_port *ap)
 		void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
 		host_stat = readb(mmio + ATA_DMA_STATUS);
 	} else
-	host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+		host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
 	return host_stat;
 }
 
-- 
cgit v1.2.3


From 14be71f4c5c5ad1e222c5202ee6d234e9c8828b7 Mon Sep 17 00:00:00 2001
From: Albert Lee <albertcc@tw.ibm.com>
Date: Tue, 27 Sep 2005 17:36:35 +0800
Subject: [PATCH] libata: rename host states

Changes:
s/PIO_ST_/HSM_ST_/ and s/pio_task_state/hsm_task_state/.

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
---
 drivers/scsi/libata-core.c | 78 +++++++++++++++++++++++-----------------------
 1 file changed, 39 insertions(+), 39 deletions(-)

(limited to 'drivers/scsi/libata-core.c')

diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index cc68f5706ac..c4fcdc30f18 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -2425,20 +2425,20 @@ void ata_poll_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
 static unsigned long ata_pio_poll(struct ata_port *ap)
 {
 	u8 status;
-	unsigned int poll_state = PIO_ST_UNKNOWN;
-	unsigned int reg_state = PIO_ST_UNKNOWN;
-	const unsigned int tmout_state = PIO_ST_TMOUT;
-
-	switch (ap->pio_task_state) {
-	case PIO_ST:
-	case PIO_ST_POLL:
-		poll_state = PIO_ST_POLL;
-		reg_state = PIO_ST;
+	unsigned int poll_state = HSM_ST_UNKNOWN;
+	unsigned int reg_state = HSM_ST_UNKNOWN;
+	const unsigned int tmout_state = HSM_ST_TMOUT;
+
+	switch (ap->hsm_task_state) {
+	case HSM_ST:
+	case HSM_ST_POLL:
+		poll_state = HSM_ST_POLL;
+		reg_state = HSM_ST;
 		break;
-	case PIO_ST_LAST:
-	case PIO_ST_LAST_POLL:
-		poll_state = PIO_ST_LAST_POLL;
-		reg_state = PIO_ST_LAST;
+	case HSM_ST_LAST:
+	case HSM_ST_LAST_POLL:
+		poll_state = HSM_ST_LAST_POLL;
+		reg_state = HSM_ST_LAST;
 		break;
 	default:
 		BUG();
@@ -2448,14 +2448,14 @@ static unsigned long ata_pio_poll(struct ata_port *ap)
 	status = ata_chk_status(ap);
 	if (status & ATA_BUSY) {
 		if (time_after(jiffies, ap->pio_task_timeout)) {
-			ap->pio_task_state = tmout_state;
+			ap->hsm_task_state = tmout_state;
 			return 0;
 		}
-		ap->pio_task_state = poll_state;
+		ap->hsm_task_state = poll_state;
 		return ATA_SHORT_PAUSE;
 	}
 
-	ap->pio_task_state = reg_state;
+	ap->hsm_task_state = reg_state;
 	return 0;
 }
 
@@ -2480,14 +2480,14 @@ static int ata_pio_complete (struct ata_port *ap)
 	 * we enter, BSY will be cleared in a chk-status or two.  If not,
 	 * the drive is probably seeking or something.  Snooze for a couple
 	 * msecs, then chk-status again.  If still busy, fall back to
-	 * PIO_ST_POLL state.
+	 * HSM_ST_POLL state.
 	 */
 	drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 10);
 	if (drv_stat & (ATA_BUSY | ATA_DRQ)) {
 		msleep(2);
 		drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 10);
 		if (drv_stat & (ATA_BUSY | ATA_DRQ)) {
-			ap->pio_task_state = PIO_ST_LAST_POLL;
+			ap->hsm_task_state = HSM_ST_LAST_POLL;
 			ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO;
 			return 0;
 		}
@@ -2495,14 +2495,14 @@ static int ata_pio_complete (struct ata_port *ap)
 
 	drv_stat = ata_wait_idle(ap);
 	if (!ata_ok(drv_stat)) {
-		ap->pio_task_state = PIO_ST_ERR;
+		ap->hsm_task_state = HSM_ST_ERR;
 		return 0;
 	}
 
 	qc = ata_qc_from_tag(ap, ap->active_tag);
 	assert(qc != NULL);
 
-	ap->pio_task_state = PIO_ST_IDLE;
+	ap->hsm_task_state = HSM_ST_IDLE;
 
 	ata_poll_qc_complete(qc, drv_stat);
 
@@ -2662,7 +2662,7 @@ static void ata_pio_sector(struct ata_queued_cmd *qc)
 	unsigned char *buf;
 
 	if (qc->cursect == (qc->nsect - 1))
-		ap->pio_task_state = PIO_ST_LAST;
+		ap->hsm_task_state = HSM_ST_LAST;
 
 	page = sg[qc->cursg].page;
 	offset = sg[qc->cursg].offset + qc->cursg_ofs * ATA_SECT_SIZE;
@@ -2712,7 +2712,7 @@ static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes)
 	unsigned int offset, count;
 
 	if (qc->curbytes + bytes >= qc->nbytes)
-		ap->pio_task_state = PIO_ST_LAST;
+		ap->hsm_task_state = HSM_ST_LAST;
 
 next_sg:
 	if (unlikely(qc->cursg >= qc->n_elem)) {
@@ -2734,7 +2734,7 @@ next_sg:
 		for (i = 0; i < words; i++)
 			ata_data_xfer(ap, (unsigned char*)pad_buf, 2, do_write);
 
-		ap->pio_task_state = PIO_ST_LAST;
+		ap->hsm_task_state = HSM_ST_LAST;
 		return;
 	}
 
@@ -2815,7 +2815,7 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc)
 err_out:
 	printk(KERN_INFO "ata%u: dev %u: ATAPI check failed\n",
 	      ap->id, dev->devno);
-	ap->pio_task_state = PIO_ST_ERR;
+	ap->hsm_task_state = HSM_ST_ERR;
 }
 
 /**
@@ -2837,14 +2837,14 @@ static void ata_pio_block(struct ata_port *ap)
 	 * a chk-status or two.  If not, the drive is probably seeking
 	 * or something.  Snooze for a couple msecs, then
 	 * chk-status again.  If still busy, fall back to
-	 * PIO_ST_POLL state.
+	 * HSM_ST_POLL state.
 	 */
 	status = ata_busy_wait(ap, ATA_BUSY, 5);
 	if (status & ATA_BUSY) {
 		msleep(2);
 		status = ata_busy_wait(ap, ATA_BUSY, 10);
 		if (status & ATA_BUSY) {
-			ap->pio_task_state = PIO_ST_POLL;
+			ap->hsm_task_state = HSM_ST_POLL;
 			ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO;
 			return;
 		}
@@ -2856,7 +2856,7 @@ static void ata_pio_block(struct ata_port *ap)
 	if (is_atapi_taskfile(&qc->tf)) {
 		/* no more data to transfer or unsupported ATAPI command */
 		if ((status & ATA_DRQ) == 0) {
-			ap->pio_task_state = PIO_ST_LAST;
+			ap->hsm_task_state = HSM_ST_LAST;
 			return;
 		}
 
@@ -2864,7 +2864,7 @@ static void ata_pio_block(struct ata_port *ap)
 	} else {
 		/* handle BSY=0, DRQ=0 as error */
 		if ((status & ATA_DRQ) == 0) {
-			ap->pio_task_state = PIO_ST_ERR;
+			ap->hsm_task_state = HSM_ST_ERR;
 			return;
 		}
 
@@ -2884,7 +2884,7 @@ static void ata_pio_error(struct ata_port *ap)
 	printk(KERN_WARNING "ata%u: PIO error, drv_stat 0x%x\n",
 	       ap->id, drv_stat);
 
-	ap->pio_task_state = PIO_ST_IDLE;
+	ap->hsm_task_state = HSM_ST_IDLE;
 
 	ata_poll_qc_complete(qc, drv_stat | ATA_ERR);
 }
@@ -2899,25 +2899,25 @@ fsm_start:
 	timeout = 0;
 	qc_completed = 0;
 
-	switch (ap->pio_task_state) {
-	case PIO_ST_IDLE:
+	switch (ap->hsm_task_state) {
+	case HSM_ST_IDLE:
 		return;
 
-	case PIO_ST:
+	case HSM_ST:
 		ata_pio_block(ap);
 		break;
 
-	case PIO_ST_LAST:
+	case HSM_ST_LAST:
 		qc_completed = ata_pio_complete(ap);
 		break;
 
-	case PIO_ST_POLL:
-	case PIO_ST_LAST_POLL:
+	case HSM_ST_POLL:
+	case HSM_ST_LAST_POLL:
 		timeout = ata_pio_poll(ap);
 		break;
 
-	case PIO_ST_TMOUT:
-	case PIO_ST_ERR:
+	case HSM_ST_TMOUT:
+	case HSM_ST_ERR:
 		ata_pio_error(ap);
 		return;
 	}
@@ -3360,7 +3360,7 @@ int ata_qc_issue_prot(struct ata_queued_cmd *qc)
 	case ATA_PROT_PIO: /* load tf registers, initiate polling pio */
 		ata_qc_set_polling(qc);
 		ata_tf_to_host_nolock(ap, &qc->tf);
-		ap->pio_task_state = PIO_ST;
+		ap->hsm_task_state = HSM_ST;
 		queue_work(ata_wq, &ap->pio_task);
 		break;
 
@@ -3806,7 +3806,7 @@ static void atapi_packet_task(void *_data)
 		ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1);
 
 		/* PIO commands are handled by polling */
-		ap->pio_task_state = PIO_ST;
+		ap->hsm_task_state = HSM_ST;
 		queue_work(ata_wq, &ap->pio_task);
 	}
 
-- 
cgit v1.2.3


From 644dd0cc494702ecd0698f467de113ace9593888 Mon Sep 17 00:00:00 2001
From: Jeff Garzik <jgarzik@pobox.com>
Date: Mon, 3 Oct 2005 15:55:19 -0400
Subject: [libata] improve device scan

Replace SCSI's legacy "bang at the door" method of probing with one
directly controlled by the underlying ATA transport layer.

We now only call scsi_scan_target() for devices we find, rather than
probing every possible channel/id within a certain range.
---
 drivers/scsi/libata-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/scsi/libata-core.c')

diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index e5b01997117..902c76364af 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -4113,7 +4113,7 @@ int ata_device_add(struct ata_probe_ent *ent)
 	for (i = 0; i < count; i++) {
 		struct ata_port *ap = host_set->ports[i];
 
-		scsi_scan_host(ap->host);
+		ata_scsi_scan_host(ap);
 	}
 
 	dev_set_drvdata(dev, host_set);
-- 
cgit v1.2.3


From 47a8659380d40d5c0786ddb62a89b3f7f1392430 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Tue, 4 Oct 2005 08:09:19 -0400
Subject: libata: bitmask based pci init functions for one or two ports

This redoes the n_ports logic I proposed before as a bitmask.
ata_pci_init_native_mode is now used with a mask allowing for mixed mode
stuff later on. ata_pci_init_legacy_port is called with port number and
does one port now not two. Instead it is called twice by the ata init
logic which cleans both of them up.

There are stil limits in the original code left over

- IRQ/port mapping for legacy mode should be arch specific values
- You can have one legacy mode IDE adapter per PCI root bridge on some systems
- Doesn't handle mixed mode devices yet (but is now a lot closer to it)
---
 drivers/scsi/libata-core.c | 133 ++++++++++++++++++++++++++-------------------
 1 file changed, 76 insertions(+), 57 deletions(-)

(limited to 'drivers/scsi/libata-core.c')

diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 03d422e99e5..82ec7f30bf3 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -4363,85 +4363,87 @@ void ata_pci_host_stop (struct ata_host_set *host_set)
  *	ata_pci_init_native_mode - Initialize native-mode driver
  *	@pdev:  pci device to be initialized
  *	@port:  array[2] of pointers to port info structures.
+ *	@ports: bitmap of ports present
  *
  *	Utility function which allocates and initializes an
  *	ata_probe_ent structure for a standard dual-port
  *	PIO-based IDE controller.  The returned ata_probe_ent
  *	structure can be passed to ata_device_add().  The returned
  *	ata_probe_ent structure should then be freed with kfree().
+ *
+ *	The caller need only pass the address of the primary port, the
+ *	secondary will be deduced automatically. If the device has non
+ *	standard secondary port mappings this function can be called twice,
+ *	once for each interface.
  */
 
 struct ata_probe_ent *
-ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port)
+ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int ports)
 {
 	struct ata_probe_ent *probe_ent =
 		ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
+	int p = 0;
+
 	if (!probe_ent)
 		return NULL;
 
-	probe_ent->n_ports = 2;
 	probe_ent->irq = pdev->irq;
 	probe_ent->irq_flags = SA_SHIRQ;
 
-	probe_ent->port[0].cmd_addr = pci_resource_start(pdev, 0);
-	probe_ent->port[0].altstatus_addr =
-	probe_ent->port[0].ctl_addr =
-		pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS;
-	probe_ent->port[0].bmdma_addr = pci_resource_start(pdev, 4);
-
-	probe_ent->port[1].cmd_addr = pci_resource_start(pdev, 2);
-	probe_ent->port[1].altstatus_addr =
-	probe_ent->port[1].ctl_addr =
-		pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS;
-	probe_ent->port[1].bmdma_addr = pci_resource_start(pdev, 4) + 8;
+	if (ports & ATA_PORT_PRIMARY) {
+		probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 0);
+		probe_ent->port[p].altstatus_addr =
+		probe_ent->port[p].ctl_addr =
+			pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS;
+		probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4);
+		ata_std_ports(&probe_ent->port[p]);
+		p++;
+	}
 
-	ata_std_ports(&probe_ent->port[0]);
-	ata_std_ports(&probe_ent->port[1]);
+	if (ports & ATA_PORT_SECONDARY) {
+		probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 2);
+		probe_ent->port[p].altstatus_addr =
+		probe_ent->port[p].ctl_addr =
+			pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS;
+		probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4) + 8;
+		ata_std_ports(&probe_ent->port[p]);
+		p++;
+	}
 
+	probe_ent->n_ports = p;
 	return probe_ent;
 }
 
-static struct ata_probe_ent *
-ata_pci_init_legacy_mode(struct pci_dev *pdev, struct ata_port_info **port,
-    struct ata_probe_ent **ppe2)
+static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, struct ata_port_info **port, int port_num)
 {
-	struct ata_probe_ent *probe_ent, *probe_ent2;
+	struct ata_probe_ent *probe_ent;
 
 	probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
 	if (!probe_ent)
 		return NULL;
-	probe_ent2 = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[1]);
-	if (!probe_ent2) {
-		kfree(probe_ent);
-		return NULL;
-	}
-
-	probe_ent->n_ports = 1;
-	probe_ent->irq = 14;
 
-	probe_ent->hard_port_no = 0;
+	
 	probe_ent->legacy_mode = 1;
-
-	probe_ent2->n_ports = 1;
-	probe_ent2->irq = 15;
-
-	probe_ent2->hard_port_no = 1;
-	probe_ent2->legacy_mode = 1;
-
-	probe_ent->port[0].cmd_addr = 0x1f0;
-	probe_ent->port[0].altstatus_addr =
-	probe_ent->port[0].ctl_addr = 0x3f6;
-	probe_ent->port[0].bmdma_addr = pci_resource_start(pdev, 4);
-
-	probe_ent2->port[0].cmd_addr = 0x170;
-	probe_ent2->port[0].altstatus_addr =
-	probe_ent2->port[0].ctl_addr = 0x376;
-	probe_ent2->port[0].bmdma_addr = pci_resource_start(pdev, 4)+8;
-
+	probe_ent->n_ports = 1;
+	probe_ent->hard_port_no = port_num;
+
+	switch(port_num)
+	{
+		case 0:
+			probe_ent->irq = 14;
+			probe_ent->port[0].cmd_addr = 0x1f0;
+			probe_ent->port[0].altstatus_addr =
+			probe_ent->port[0].ctl_addr = 0x3f6;
+			break;
+		case 1:
+			probe_ent->irq = 15;
+			probe_ent->port[0].cmd_addr = 0x170;
+			probe_ent->port[0].altstatus_addr =
+			probe_ent->port[0].ctl_addr = 0x376;
+			break;
+	}
+	probe_ent->port[0].bmdma_addr = pci_resource_start(pdev, 4) + 8 * port_num;
 	ata_std_ports(&probe_ent->port[0]);
-	ata_std_ports(&probe_ent2->port[0]);
-
-	*ppe2 = probe_ent2;
 	return probe_ent;
 }
 
@@ -4470,7 +4472,7 @@ ata_pci_init_legacy_mode(struct pci_dev *pdev, struct ata_port_info **port,
 int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
 		      unsigned int n_ports)
 {
-	struct ata_probe_ent *probe_ent, *probe_ent2 = NULL;
+	struct ata_probe_ent *probe_ent = NULL, *probe_ent2 = NULL;
 	struct ata_port_info *port[2];
 	u8 tmp8, mask;
 	unsigned int legacy_mode = 0;
@@ -4487,7 +4489,7 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
 
 	if ((port[0]->host_flags & ATA_FLAG_NO_LEGACY) == 0
 	    && (pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
-		/* TODO: support transitioning to native mode? */
+		/* TODO: What if one channel is in native mode ... */
 		pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8);
 		mask = (1 << 2) | (1 << 0);
 		if ((tmp8 & mask) != mask)
@@ -4495,11 +4497,20 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
 	}
 
 	/* FIXME... */
-	if ((!legacy_mode) && (n_ports > 1)) {
-		printk(KERN_ERR "ata: BUG: native mode, n_ports > 1\n");
-		return -EINVAL;
+	if ((!legacy_mode) && (n_ports > 2)) {
+		printk(KERN_ERR "ata: BUG: native mode, n_ports > 2\n");
+		n_ports = 2;
+		/* For now */
 	}
 
+	/* FIXME: Really for ATA it isn't safe because the device may be
+	   multi-purpose and we want to leave it alone if it was already
+	   enabled. Secondly for shared use as Arjan says we want refcounting
+	   
+	   Checking dev->is_enabled is insufficient as this is not set at
+	   boot for the primary video which is BIOS enabled
+         */
+         
 	rc = pci_enable_device(pdev);
 	if (rc)
 		return rc;
@@ -4510,6 +4521,7 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
 		goto err_out;
 	}
 
+	/* FIXME: Should use platform specific mappers for legacy port ranges */
 	if (legacy_mode) {
 		if (!request_region(0x1f0, 8, "libata")) {
 			struct resource *conflict, res;
@@ -4554,10 +4566,17 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
 		goto err_out_regions;
 
 	if (legacy_mode) {
-		probe_ent = ata_pci_init_legacy_mode(pdev, port, &probe_ent2);
-	} else
-		probe_ent = ata_pci_init_native_mode(pdev, port);
-	if (!probe_ent) {
+		if (legacy_mode & (1 << 0))
+			probe_ent = ata_pci_init_legacy_port(pdev, port, 0);
+		if (legacy_mode & (1 << 1))
+			probe_ent2 = ata_pci_init_legacy_port(pdev, port, 1);
+	} else {
+		if (n_ports == 2)
+			probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
+		else
+			probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY);
+	}
+	if (!probe_ent && !probe_ent2) {
 		rc = -ENOMEM;
 		goto err_out_regions;
 	}
-- 
cgit v1.2.3


From 67846b30171cc4d706125f630193a76a26bb334a Mon Sep 17 00:00:00 2001
From: Jeff Garzik <jgarzik@pobox.com>
Date: Wed, 5 Oct 2005 02:58:32 -0400
Subject: libata: add ata_ratelimit(), use it in AHCI driver irq handler

---
 drivers/scsi/libata-core.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

(limited to 'drivers/scsi/libata-core.c')

diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index f0894bfa908..ceffaef37d1 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -48,6 +48,7 @@
 #include <linux/completion.h>
 #include <linux/suspend.h>
 #include <linux/workqueue.h>
+#include <linux/jiffies.h>
 #include <scsi/scsi.h>
 #include "scsi.h"
 #include "scsi_priv.h"
@@ -4688,6 +4689,27 @@ static void __exit ata_exit(void)
 module_init(ata_init);
 module_exit(ata_exit);
 
+static unsigned long ratelimit_time;
+static spinlock_t ata_ratelimit_lock = SPIN_LOCK_UNLOCKED;
+
+int ata_ratelimit(void)
+{
+	int rc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ata_ratelimit_lock, flags);
+
+	if (time_after(jiffies, ratelimit_time)) {
+		rc = 1;
+		ratelimit_time = jiffies + (HZ/5);
+	} else
+		rc = 0;
+
+	spin_unlock_irqrestore(&ata_ratelimit_lock, flags);
+
+	return rc;
+}
+
 /*
  * libata is essentially a library of internal helper functions for
  * low-level ATA host controller drivers.  As such, the API/ABI is
@@ -4729,6 +4751,7 @@ EXPORT_SYMBOL_GPL(sata_phy_reset);
 EXPORT_SYMBOL_GPL(__sata_phy_reset);
 EXPORT_SYMBOL_GPL(ata_bus_reset);
 EXPORT_SYMBOL_GPL(ata_port_disable);
+EXPORT_SYMBOL_GPL(ata_ratelimit);
 EXPORT_SYMBOL_GPL(ata_scsi_ioctl);
 EXPORT_SYMBOL_GPL(ata_scsi_queuecmd);
 EXPORT_SYMBOL_GPL(ata_scsi_error);
-- 
cgit v1.2.3


From a939c9631527053aa38aa8795a6f7203c7f20b69 Mon Sep 17 00:00:00 2001
From: Jeff Garzik <jgarzik@pobox.com>
Date: Wed, 5 Oct 2005 17:09:16 -0400
Subject: libata: move atapi_request_sense() to libata-scsi module

No content changes, just moving code around.
---
 drivers/scsi/libata-core.c | 49 +---------------------------------------------
 1 file changed, 1 insertion(+), 48 deletions(-)

(limited to 'drivers/scsi/libata-core.c')

diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index ceffaef37d1..f731bbdd423 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -71,7 +71,6 @@ static int fgb(u32 bitmap);
 static int ata_choose_xfer_mode(struct ata_port *ap,
 				u8 *xfer_mode_out,
 				unsigned int *xfer_shift_out);
-static int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat);
 static void __ata_qc_complete(struct ata_queued_cmd *qc);
 
 static unsigned int ata_unique_id = 1;
@@ -3015,52 +3014,6 @@ fsm_start:
 		goto fsm_start;
 }
 
-static void atapi_request_sense(struct ata_port *ap, struct ata_device *dev,
-				struct scsi_cmnd *cmd)
-{
-	DECLARE_COMPLETION(wait);
-	struct ata_queued_cmd *qc;
-	unsigned long flags;
-	int rc;
-
-	DPRINTK("ATAPI request sense\n");
-
-	qc = ata_qc_new_init(ap, dev);
-	BUG_ON(qc == NULL);
-
-	/* FIXME: is this needed? */
-	memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer));
-
-	ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer));
-	qc->dma_dir = DMA_FROM_DEVICE;
-
-	memset(&qc->cdb, 0, ap->cdb_len);
-	qc->cdb[0] = REQUEST_SENSE;
-	qc->cdb[4] = SCSI_SENSE_BUFFERSIZE;
-
-	qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
-	qc->tf.command = ATA_CMD_PACKET;
-
-	qc->tf.protocol = ATA_PROT_ATAPI;
-	qc->tf.lbam = (8 * 1024) & 0xff;
-	qc->tf.lbah = (8 * 1024) >> 8;
-	qc->nbytes = SCSI_SENSE_BUFFERSIZE;
-
-	qc->waiting = &wait;
-	qc->complete_fn = ata_qc_complete_noop;
-
-	spin_lock_irqsave(&ap->host_set->lock, flags);
-	rc = ata_qc_issue(qc);
-	spin_unlock_irqrestore(&ap->host_set->lock, flags);
-
-	if (rc)
-		ata_port_disable(ap);
-	else
-		wait_for_completion(&wait);
-
-	DPRINTK("EXIT\n");
-}
-
 /**
  *	ata_qc_timeout - Handle timeout of queued command
  *	@qc: Command that timed out
@@ -3254,7 +3207,7 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap,
 	return qc;
 }
 
-static int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat)
+int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat)
 {
 	return 0;
 }
-- 
cgit v1.2.3


From e12669e774be403c84baa651306d305752a35cd8 Mon Sep 17 00:00:00 2001
From: Jeff Garzik <jgarzik@pobox.com>
Date: Wed, 5 Oct 2005 18:39:23 -0400
Subject: libata: minor cleanups

A few code shuffles, to make merging future code easier.

Add (DRIVER_SENSE << 24) to certain result codes, as noted by Douglas
Gilbert.
---
 drivers/scsi/libata-core.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/scsi/libata-core.c')

diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index f731bbdd423..d568914c434 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -3131,14 +3131,14 @@ void ata_eng_timeout(struct ata_port *ap)
 	DPRINTK("ENTER\n");
 
 	qc = ata_qc_from_tag(ap, ap->active_tag);
-	if (!qc) {
+	if (qc)
+		ata_qc_timeout(qc);
+	else {
 		printk(KERN_ERR "ata%u: BUG: timeout without command\n",
 		       ap->id);
 		goto out;
 	}
 
-	ata_qc_timeout(qc);
-
 out:
 	DPRINTK("EXIT\n");
 }
-- 
cgit v1.2.3


From 07506697d1c615924298406f2357810709c09bcd Mon Sep 17 00:00:00 2001
From: Albert Lee <albertcc@tw.ibm.com>
Date: Wed, 12 Oct 2005 15:04:18 +0800
Subject: [PATCH] libata CHS: move the initialization of taskfile LBA flags
 (revise #6)

   move the initialization of taskfile LBA flags
     "ATA_TFLAG_LBA" and "ATA_TFLAG_LBA48 flags"
   to the SCSI translation functions

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>

=============
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
---
 drivers/scsi/libata-core.c | 7 -------
 1 file changed, 7 deletions(-)

(limited to 'drivers/scsi/libata-core.c')

diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index d568914c434..55d4dee133a 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -3195,13 +3195,6 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap,
 		qc->nbytes = qc->curbytes = 0;
 
 		ata_tf_init(ap, &qc->tf, dev->devno);
-
-		if (dev->flags & ATA_DFLAG_LBA) {
-			qc->tf.flags |= ATA_TFLAG_LBA;
-
-			if (dev->flags & ATA_DFLAG_LBA48)
-				qc->tf.flags |= ATA_TFLAG_LBA48;
-		}
 	}
 
 	return qc;
-- 
cgit v1.2.3


From 8cbd6df1f0ce977ab7b61feffa59879bb5e0ed8f Mon Sep 17 00:00:00 2001
From: Albert Lee <albertcc@tw.ibm.com>
Date: Wed, 12 Oct 2005 15:06:27 +0800
Subject: [PATCH] libata CHS: calculate read/write commands and protocol on the
 fly (revise #6)

     - merge ata_prot_to_cmd() and ata_dev_set_protocol() as
       ata_rwcmd_protocol()
     - pave road for read/write multiple support
     - remove usage of pre-cached command and protocol values and call
       ata_rwcmd_protocol() instead

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>

==============
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
---
 drivers/scsi/libata-core.c | 105 ++++++++++++++++-----------------------------
 1 file changed, 37 insertions(+), 68 deletions(-)

(limited to 'drivers/scsi/libata-core.c')

diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 55d4dee133a..19d3d717faf 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -616,79 +616,53 @@ void ata_tf_from_fis(u8 *fis, struct ata_taskfile *tf)
 	tf->hob_nsect	= fis[13];
 }
 
-/**
- *	ata_prot_to_cmd - determine which read/write opcodes to use
- *	@protocol: ATA_PROT_xxx taskfile protocol
- *	@lba48: true is lba48 is present
- *
- *	Given necessary input, determine which read/write commands
- *	to use to transfer data.
- *
- *	LOCKING:
- *	None.
- */
-static int ata_prot_to_cmd(int protocol, int lba48)
-{
-	int rcmd = 0, wcmd = 0;
-
-	switch (protocol) {
-	case ATA_PROT_PIO:
-		if (lba48) {
-			rcmd = ATA_CMD_PIO_READ_EXT;
-			wcmd = ATA_CMD_PIO_WRITE_EXT;
-		} else {
-			rcmd = ATA_CMD_PIO_READ;
-			wcmd = ATA_CMD_PIO_WRITE;
-		}
-		break;
-
-	case ATA_PROT_DMA:
-		if (lba48) {
-			rcmd = ATA_CMD_READ_EXT;
-			wcmd = ATA_CMD_WRITE_EXT;
-		} else {
-			rcmd = ATA_CMD_READ;
-			wcmd = ATA_CMD_WRITE;
-		}
-		break;
-
-	default:
-		return -1;
-	}
-
-	return rcmd | (wcmd << 8);
-}
+static const u8 ata_rw_cmds[] = {
+	/* pio multi */
+	ATA_CMD_READ_MULTI,
+	ATA_CMD_WRITE_MULTI,
+	ATA_CMD_READ_MULTI_EXT,
+	ATA_CMD_WRITE_MULTI_EXT,
+	/* pio */
+	ATA_CMD_PIO_READ,
+	ATA_CMD_PIO_WRITE,
+	ATA_CMD_PIO_READ_EXT,
+	ATA_CMD_PIO_WRITE_EXT,
+	/* dma */
+	ATA_CMD_READ,
+	ATA_CMD_WRITE,
+	ATA_CMD_READ_EXT,
+	ATA_CMD_WRITE_EXT
+};
 
 /**
- *	ata_dev_set_protocol - set taskfile protocol and r/w commands
- *	@dev: device to examine and configure
+ *	ata_rwcmd_protocol - set taskfile r/w commands and protocol
+ *	@qc: command to examine and configure
  *
- *	Examine the device configuration, after we have
- *	read the identify-device page and configured the
- *	data transfer mode.  Set internal state related to
- *	the ATA taskfile protocol (pio, pio mult, dma, etc.)
- *	and calculate the proper read/write commands to use.
+ *	Examine the device configuration and tf->flags to calculate 
+ *	the proper read/write commands and protocol to use.
  *
  *	LOCKING:
  *	caller.
  */
-static void ata_dev_set_protocol(struct ata_device *dev)
+void ata_rwcmd_protocol(struct ata_queued_cmd *qc)
 {
-	int pio = (dev->flags & ATA_DFLAG_PIO);
-	int lba48 = (dev->flags & ATA_DFLAG_LBA48);
-	int proto, cmd;
+	struct ata_taskfile *tf = &qc->tf;
+	struct ata_device *dev = qc->dev;
 
-	if (pio)
-		proto = dev->xfer_protocol = ATA_PROT_PIO;
-	else
-		proto = dev->xfer_protocol = ATA_PROT_DMA;
+	int index, lba48, write;
+ 
+	lba48 = (tf->flags & ATA_TFLAG_LBA48) ? 2 : 0;
+	write = (tf->flags & ATA_TFLAG_WRITE) ? 1 : 0;
 
-	cmd = ata_prot_to_cmd(proto, lba48);
-	if (cmd < 0)
-		BUG();
+	if (dev->flags & ATA_DFLAG_PIO) {
+		tf->protocol = ATA_PROT_PIO;
+		index = dev->multi_count ? 0 : 4;
+	} else {
+		tf->protocol = ATA_PROT_DMA;
+		index = 8;
+	}
 
-	dev->read_cmd = cmd & 0xff;
-	dev->write_cmd = (cmd >> 8) & 0xff;
+	tf->command = ata_rw_cmds[index + lba48 + write];
 }
 
 static const char * xfer_mode_str[] = {
@@ -1641,7 +1615,7 @@ static void ata_host_set_dma(struct ata_port *ap, u8 xfer_mode,
  */
 static void ata_set_mode(struct ata_port *ap)
 {
-	unsigned int i, xfer_shift;
+	unsigned int xfer_shift;
 	u8 xfer_mode;
 	int rc;
 
@@ -1670,11 +1644,6 @@ static void ata_set_mode(struct ata_port *ap)
 	if (ap->ops->post_set_mode)
 		ap->ops->post_set_mode(ap);
 
-	for (i = 0; i < 2; i++) {
-		struct ata_device *dev = &ap->device[i];
-		ata_dev_set_protocol(dev);
-	}
-
 	return;
 
 err_out:
-- 
cgit v1.2.3


From 59a10b172fccaea793352c00fd9065f0a5b4ef70 Mon Sep 17 00:00:00 2001
From: Albert Lee <albertcc@tw.ibm.com>
Date: Wed, 12 Oct 2005 15:09:42 +0800
Subject: [PATCH] libata CHS: reread device identify info (revise #6)

problem:
      id[53-58] might be changed after initializing device CHS settings.

changes:
    - call ata_dev_reread_id() to reread the identify device info,
      after initializing device CHS settings.

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>

============
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
---
 drivers/scsi/libata-core.c | 65 +++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 64 insertions(+), 1 deletion(-)

(limited to 'drivers/scsi/libata-core.c')

diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 19d3d717faf..175d4646333 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -63,6 +63,7 @@
 static unsigned int ata_busy_sleep (struct ata_port *ap,
 				    unsigned long tmout_pat,
 			    	    unsigned long tmout);
+static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev);
 static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev);
 static void ata_set_mode(struct ata_port *ap);
 static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev);
@@ -1240,9 +1241,15 @@ retry:
 		 * anything else..
 		 * Some drives were very specific about that exact sequence.
 		 */
-		if (major_version < 4 || (!ata_id_has_lba(dev->id)))
+		if (major_version < 4 || (!ata_id_has_lba(dev->id))) {
 			ata_dev_init_params(ap, dev);
 
+			/* current CHS translation info (id[53-58]) might be
+			 * changed. reread the identify device info.
+			 */
+			ata_dev_reread_id(ap, dev);
+		}
+
 		if (ata_id_has_lba(dev->id)) {
 			dev->flags |= ATA_DFLAG_LBA;
 
@@ -2150,6 +2157,62 @@ static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev)
 	DPRINTK("EXIT\n");
 }
 
+/**
+ *	ata_dev_reread_id - Reread the device identify device info
+ *	@ap: port where the device is
+ *	@dev: device to reread the identify device info
+ *
+ *	LOCKING:
+ */
+
+static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev)
+{
+	DECLARE_COMPLETION(wait);
+	struct ata_queued_cmd *qc;
+	unsigned long flags;
+	int rc;
+
+	qc = ata_qc_new_init(ap, dev);
+	BUG_ON(qc == NULL);
+
+	ata_sg_init_one(qc, dev->id, sizeof(dev->id));
+	qc->dma_dir = DMA_FROM_DEVICE;
+
+	if (dev->class == ATA_DEV_ATA) {
+		qc->tf.command = ATA_CMD_ID_ATA;
+		DPRINTK("do ATA identify\n");
+	} else {
+		qc->tf.command = ATA_CMD_ID_ATAPI;
+		DPRINTK("do ATAPI identify\n");
+	}
+
+	qc->tf.flags |= ATA_TFLAG_DEVICE;
+	qc->tf.protocol = ATA_PROT_PIO;
+	qc->nsect = 1;
+
+	qc->waiting = &wait;
+	qc->complete_fn = ata_qc_complete_noop;
+
+	spin_lock_irqsave(&ap->host_set->lock, flags);
+	rc = ata_qc_issue(qc);
+	spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+	if (rc)
+		goto err_out;
+
+	wait_for_completion(&wait);
+
+	swap_buf_le16(dev->id, ATA_ID_WORDS);
+
+	ata_dump_id(dev);
+
+	DPRINTK("EXIT\n");
+
+	return;
+err_out:
+	ata_port_disable(ap);
+}
+
 /**
  *	ata_dev_init_params - Issue INIT DEV PARAMS command
  *	@ap: Port associated with device @dev
-- 
cgit v1.2.3


From 11e29e21514517f3022a1f30998ac4c7b1197658 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Fri, 21 Oct 2005 18:46:32 -0400
Subject: libata: handle early device PIO modes correctly

---
 drivers/scsi/libata-core.c | 31 +++++++++++++++++++++++++++----
 1 file changed, 27 insertions(+), 4 deletions(-)

(limited to 'drivers/scsi/libata-core.c')

diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 175d4646333..09639e7aaa7 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -1082,6 +1082,31 @@ static inline void ata_dump_id(struct ata_device *dev)
 		dev->id[93]);
 }
 
+/*
+ *	Compute the PIO modes available for this device. This is not as
+ *	trivial as it seems if we must consider early devices correctly.
+ *
+ *	FIXME: pre IDE drive timing (do we care ?). 
+ */
+
+static unsigned int ata_pio_modes(struct ata_device *adev)
+{
+	u16 modes;
+
+	/* Usual case. Word 53 indicates word 88 is valid */
+	if (adev->id[ATA_ID_FIELD_VALID] & (1 << 2)) {
+		modes = adev->id[ATA_ID_PIO_MODES] & 0x03;
+		modes <<= 3;
+		modes |= 0x7;
+		return modes;
+	}
+
+	/* If word 88 isn't valid then Word 51 holds the PIO timing number
+	   for the maximum. Turn it into a mask and return it */
+	modes = (2 << (adev->id[ATA_ID_OLD_PIO_MODES] & 0xFF)) - 1 ;
+	return modes;
+}
+
 /**
  *	ata_dev_identify - obtain IDENTIFY x DEVICE page
  *	@ap: port on which device we wish to probe resides
@@ -1215,10 +1240,8 @@ retry:
 	xfer_modes = dev->id[ATA_ID_UDMA_MODES];
 	if (!xfer_modes)
 		xfer_modes = (dev->id[ATA_ID_MWDMA_MODES]) << ATA_SHIFT_MWDMA;
-	if (!xfer_modes) {
-		xfer_modes = (dev->id[ATA_ID_PIO_MODES]) << (ATA_SHIFT_PIO + 3);
-		xfer_modes |= (0x7 << ATA_SHIFT_PIO);
-	}
+	if (!xfer_modes)
+		xfer_modes = ata_pio_modes(dev);
 
 	ata_dump_id(dev);
 
-- 
cgit v1.2.3


From 452503f993feffe96e8cc9fbff4888b96e2c5e40 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Fri, 21 Oct 2005 19:01:32 -0400
Subject: Add ide-timing functionality to libata.

This is needed for full AMD and VIA drivers and possibly more. Functions
to turn actual clocking and cycle timings into register values. Also to
merge shared timings to compute an optimal timing set.

Built from the drivers/ide version by Vojtech Pavlik

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
---
 drivers/scsi/libata-core.c | 149 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 149 insertions(+)

(limited to 'drivers/scsi/libata-core.c')

diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 09639e7aaa7..9269fd9b814 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -1538,6 +1538,152 @@ void ata_port_disable(struct ata_port *ap)
 	ap->flags |= ATA_FLAG_PORT_DISABLED;
 }
 
+/*
+ * This mode timing computation functionality is ported over from
+ * drivers/ide/ide-timing.h and was originally written by Vojtech Pavlik
+ */
+/*
+ * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds).
+ * These were taken from ATA/ATAPI-6 standard, rev 0a, except
+ * for PIO 5, which is a nonstandard extension and UDMA6, which
+ * is currently supported only by Maxtor drives. 
+ */
+
+static const struct ata_timing ata_timing[] = {
+
+	{ XFER_UDMA_6,     0,   0,   0,   0,   0,   0,   0,  15 },
+	{ XFER_UDMA_5,     0,   0,   0,   0,   0,   0,   0,  20 },
+	{ XFER_UDMA_4,     0,   0,   0,   0,   0,   0,   0,  30 },
+	{ XFER_UDMA_3,     0,   0,   0,   0,   0,   0,   0,  45 },
+
+	{ XFER_UDMA_2,     0,   0,   0,   0,   0,   0,   0,  60 },
+	{ XFER_UDMA_1,     0,   0,   0,   0,   0,   0,   0,  80 },
+	{ XFER_UDMA_0,     0,   0,   0,   0,   0,   0,   0, 120 },
+
+/*	{ XFER_UDMA_SLOW,  0,   0,   0,   0,   0,   0,   0, 150 }, */
+                                          
+	{ XFER_MW_DMA_2,  25,   0,   0,   0,  70,  25, 120,   0 },
+	{ XFER_MW_DMA_1,  45,   0,   0,   0,  80,  50, 150,   0 },
+	{ XFER_MW_DMA_0,  60,   0,   0,   0, 215, 215, 480,   0 },
+                                          
+	{ XFER_SW_DMA_2,  60,   0,   0,   0, 120, 120, 240,   0 },
+	{ XFER_SW_DMA_1,  90,   0,   0,   0, 240, 240, 480,   0 },
+	{ XFER_SW_DMA_0, 120,   0,   0,   0, 480, 480, 960,   0 },
+
+/*	{ XFER_PIO_5,     20,  50,  30, 100,  50,  30, 100,   0 }, */
+	{ XFER_PIO_4,     25,  70,  25, 120,  70,  25, 120,   0 },
+	{ XFER_PIO_3,     30,  80,  70, 180,  80,  70, 180,   0 },
+
+	{ XFER_PIO_2,     30, 290,  40, 330, 100,  90, 240,   0 },
+	{ XFER_PIO_1,     50, 290,  93, 383, 125, 100, 383,   0 },
+	{ XFER_PIO_0,     70, 290, 240, 600, 165, 150, 600,   0 },
+
+/*	{ XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960,   0 }, */
+
+	{ 0xFF }
+};
+
+#define ENOUGH(v,unit)		(((v)-1)/(unit)+1)
+#define EZ(v,unit)		((v)?ENOUGH(v,unit):0)
+
+static void ata_timing_quantize(const struct ata_timing *t, struct ata_timing *q, int T, int UT)
+{
+	q->setup   = EZ(t->setup   * 1000,  T);
+	q->act8b   = EZ(t->act8b   * 1000,  T);
+	q->rec8b   = EZ(t->rec8b   * 1000,  T);
+	q->cyc8b   = EZ(t->cyc8b   * 1000,  T);
+	q->active  = EZ(t->active  * 1000,  T);
+	q->recover = EZ(t->recover * 1000,  T);
+	q->cycle   = EZ(t->cycle   * 1000,  T);
+	q->udma    = EZ(t->udma    * 1000, UT);
+}
+
+void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b,
+		      struct ata_timing *m, unsigned int what)
+{
+	if (what & ATA_TIMING_SETUP  ) m->setup   = max(a->setup,   b->setup);
+	if (what & ATA_TIMING_ACT8B  ) m->act8b   = max(a->act8b,   b->act8b);
+	if (what & ATA_TIMING_REC8B  ) m->rec8b   = max(a->rec8b,   b->rec8b);
+	if (what & ATA_TIMING_CYC8B  ) m->cyc8b   = max(a->cyc8b,   b->cyc8b);
+	if (what & ATA_TIMING_ACTIVE ) m->active  = max(a->active,  b->active);
+	if (what & ATA_TIMING_RECOVER) m->recover = max(a->recover, b->recover);
+	if (what & ATA_TIMING_CYCLE  ) m->cycle   = max(a->cycle,   b->cycle);
+	if (what & ATA_TIMING_UDMA   ) m->udma    = max(a->udma,    b->udma);
+}
+
+static const struct ata_timing* ata_timing_find_mode(unsigned short speed)
+{
+	const struct ata_timing *t;
+
+	for (t = ata_timing; t->mode != speed; t++)
+		if (t->mode != 0xFF)
+			return NULL;
+	return t; 
+}
+
+int ata_timing_compute(struct ata_device *adev, unsigned short speed,
+		       struct ata_timing *t, int T, int UT)
+{
+	const struct ata_timing *s;
+	struct ata_timing p;
+
+	/*
+	 * Find the mode. 
+	*/
+
+	if (!(s = ata_timing_find_mode(speed)))
+		return -EINVAL;
+
+	/*
+	 * If the drive is an EIDE drive, it can tell us it needs extended
+	 * PIO/MW_DMA cycle timing.
+	 */
+
+	if (adev->id[ATA_ID_FIELD_VALID] & 2) {	/* EIDE drive */
+		memset(&p, 0, sizeof(p));
+		if(speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) {
+			if (speed <= XFER_PIO_2) p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO];
+					    else p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO_IORDY];
+		} else if(speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) {
+			p.cycle = adev->id[ATA_ID_EIDE_DMA_MIN];
+		}
+		ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B);
+	}
+
+	/*
+	 * Convert the timing to bus clock counts.
+	 */
+
+	ata_timing_quantize(s, t, T, UT);
+
+	/*
+	 * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, S.M.A.R.T
+	 * and some other commands. We have to ensure that the DMA cycle timing is
+	 * slower/equal than the fastest PIO timing.
+	 */
+
+	if (speed > XFER_PIO_4) {
+		ata_timing_compute(adev, adev->pio_mode, &p, T, UT);
+		ata_timing_merge(&p, t, t, ATA_TIMING_ALL);
+	}
+
+	/*
+	 * Lenghten active & recovery time so that cycle time is correct.
+	 */
+
+	if (t->act8b + t->rec8b < t->cyc8b) {
+		t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2;
+		t->rec8b = t->cyc8b - t->act8b;
+	}
+
+	if (t->active + t->recover < t->cycle) {
+		t->active += (t->cycle - (t->active + t->recover)) / 2;
+		t->recover = t->cycle - t->active;
+	}
+
+	return 0;
+}
+
 static struct {
 	unsigned int shift;
 	u8 base;
@@ -4764,6 +4910,9 @@ EXPORT_SYMBOL_GPL(ata_dev_id_string);
 EXPORT_SYMBOL_GPL(ata_dev_config);
 EXPORT_SYMBOL_GPL(ata_scsi_simulate);
 
+EXPORT_SYMBOL_GPL(ata_timing_compute);
+EXPORT_SYMBOL_GPL(ata_timing_merge);
+
 #ifdef CONFIG_PCI
 EXPORT_SYMBOL_GPL(pci_test_config_bits);
 EXPORT_SYMBOL_GPL(ata_pci_host_stop);
-- 
cgit v1.2.3


From 057ace5e79da9ebf2aa82833cfea825533ac06fb Mon Sep 17 00:00:00 2001
From: Jeff Garzik <jgarzik@pobox.com>
Date: Sat, 22 Oct 2005 14:27:05 -0400
Subject: libata: const-ification bombing run

Enforce access rules where appropriate.

If the compiler is smart enough, this may buy us an optimization or two
as a side effect.
---
 drivers/scsi/libata-core.c | 68 +++++++++++++++++++++++-----------------------
 1 file changed, 34 insertions(+), 34 deletions(-)

(limited to 'drivers/scsi/libata-core.c')

diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 9269fd9b814..d55f12dacfc 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -67,9 +67,9 @@ static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev);
 static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev);
 static void ata_set_mode(struct ata_port *ap);
 static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev);
-static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift);
+static unsigned int ata_get_mode_mask(const struct ata_port *ap, int shift);
 static int fgb(u32 bitmap);
-static int ata_choose_xfer_mode(struct ata_port *ap,
+static int ata_choose_xfer_mode(const struct ata_port *ap,
 				u8 *xfer_mode_out,
 				unsigned int *xfer_shift_out);
 static void __ata_qc_complete(struct ata_queued_cmd *qc);
@@ -97,7 +97,7 @@ MODULE_VERSION(DRV_VERSION);
  *	Inherited from caller.
  */
 
-static void ata_tf_load_pio(struct ata_port *ap, struct ata_taskfile *tf)
+static void ata_tf_load_pio(struct ata_port *ap, const struct ata_taskfile *tf)
 {
 	struct ata_ioports *ioaddr = &ap->ioaddr;
 	unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
@@ -155,7 +155,7 @@ static void ata_tf_load_pio(struct ata_port *ap, struct ata_taskfile *tf)
  *	Inherited from caller.
  */
 
-static void ata_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf)
+static void ata_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
 {
 	struct ata_ioports *ioaddr = &ap->ioaddr;
 	unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
@@ -224,7 +224,7 @@ static void ata_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf)
  *	LOCKING:
  *	Inherited from caller.
  */
-void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf)
+void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
 {
 	if (ap->flags & ATA_FLAG_MMIO)
 		ata_tf_load_mmio(ap, tf);
@@ -244,7 +244,7 @@ void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf)
  *	spin_lock_irqsave(host_set lock)
  */
 
-static void ata_exec_command_pio(struct ata_port *ap, struct ata_taskfile *tf)
+static void ata_exec_command_pio(struct ata_port *ap, const struct ata_taskfile *tf)
 {
 	DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command);
 
@@ -265,7 +265,7 @@ static void ata_exec_command_pio(struct ata_port *ap, struct ata_taskfile *tf)
  *	spin_lock_irqsave(host_set lock)
  */
 
-static void ata_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf)
+static void ata_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
 {
 	DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command);
 
@@ -285,7 +285,7 @@ static void ata_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf)
  *	LOCKING:
  *	spin_lock_irqsave(host_set lock)
  */
-void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf)
+void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf)
 {
 	if (ap->flags & ATA_FLAG_MMIO)
 		ata_exec_command_mmio(ap, tf);
@@ -305,7 +305,7 @@ void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf)
  *	Obtains host_set lock.
  */
 
-static inline void ata_exec(struct ata_port *ap, struct ata_taskfile *tf)
+static inline void ata_exec(struct ata_port *ap, const struct ata_taskfile *tf)
 {
 	unsigned long flags;
 
@@ -328,7 +328,7 @@ static inline void ata_exec(struct ata_port *ap, struct ata_taskfile *tf)
  *	Obtains host_set lock.
  */
 
-static void ata_tf_to_host(struct ata_port *ap, struct ata_taskfile *tf)
+static void ata_tf_to_host(struct ata_port *ap, const struct ata_taskfile *tf)
 {
 	ap->ops->tf_load(ap, tf);
 
@@ -348,7 +348,7 @@ static void ata_tf_to_host(struct ata_port *ap, struct ata_taskfile *tf)
  *	spin_lock_irqsave(host_set lock)
  */
 
-void ata_tf_to_host_nolock(struct ata_port *ap, struct ata_taskfile *tf)
+void ata_tf_to_host_nolock(struct ata_port *ap, const struct ata_taskfile *tf)
 {
 	ap->ops->tf_load(ap, tf);
 	ap->ops->exec_command(ap, tf);
@@ -558,7 +558,7 @@ u8 ata_chk_err(struct ata_port *ap)
  *	Inherited from caller.
  */
 
-void ata_tf_to_fis(struct ata_taskfile *tf, u8 *fis, u8 pmp)
+void ata_tf_to_fis(const struct ata_taskfile *tf, u8 *fis, u8 pmp)
 {
 	fis[0] = 0x27;	/* Register - Host to Device FIS */
 	fis[1] = (pmp & 0xf) | (1 << 7); /* Port multiplier number,
@@ -599,7 +599,7 @@ void ata_tf_to_fis(struct ata_taskfile *tf, u8 *fis, u8 pmp)
  *	Inherited from caller.
  */
 
-void ata_tf_from_fis(u8 *fis, struct ata_taskfile *tf)
+void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf)
 {
 	tf->command	= fis[2];	/* status */
 	tf->feature	= fis[3];	/* error */
@@ -845,7 +845,7 @@ static unsigned int ata_devchk(struct ata_port *ap,
  *	the event of failure.
  */
 
-unsigned int ata_dev_classify(struct ata_taskfile *tf)
+unsigned int ata_dev_classify(const struct ata_taskfile *tf)
 {
 	/* Apple's open source Darwin code hints that some devices only
 	 * put a proper signature into the LBA mid/high registers,
@@ -937,7 +937,7 @@ static u8 ata_dev_try_classify(struct ata_port *ap, unsigned int device)
  *	caller.
  */
 
-void ata_dev_id_string(u16 *id, unsigned char *s,
+void ata_dev_id_string(const u16 *id, unsigned char *s,
 		       unsigned int ofs, unsigned int len)
 {
 	unsigned int c;
@@ -1054,7 +1054,7 @@ void ata_dev_select(struct ata_port *ap, unsigned int device,
  *	caller.
  */
 
-static inline void ata_dump_id(struct ata_device *dev)
+static inline void ata_dump_id(const struct ata_device *dev)
 {
 	DPRINTK("49==0x%04x  "
 		"53==0x%04x  "
@@ -1089,7 +1089,7 @@ static inline void ata_dump_id(struct ata_device *dev)
  *	FIXME: pre IDE drive timing (do we care ?). 
  */
 
-static unsigned int ata_pio_modes(struct ata_device *adev)
+static unsigned int ata_pio_modes(const struct ata_device *adev)
 {
 	u16 modes;
 
@@ -1352,7 +1352,7 @@ err_out:
 }
 
 
-static inline u8 ata_dev_knobble(struct ata_port *ap)
+static inline u8 ata_dev_knobble(const struct ata_port *ap)
 {
 	return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(ap->device->id)));
 }
@@ -1684,7 +1684,7 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed,
 	return 0;
 }
 
-static struct {
+static const struct {
 	unsigned int shift;
 	u8 base;
 } xfer_mode_classes[] = {
@@ -2093,7 +2093,8 @@ err_out:
 	DPRINTK("EXIT\n");
 }
 
-static void ata_pr_blacklisted(struct ata_port *ap, struct ata_device *dev)
+static void ata_pr_blacklisted(const struct ata_port *ap,
+			       const struct ata_device *dev)
 {
 	printk(KERN_WARNING "ata%u: dev %u is on DMA blacklist, disabling DMA\n",
 		ap->id, dev->devno);
@@ -2131,7 +2132,7 @@ static const char * ata_dma_blacklist [] = {
 	"_NEC DV5800A",
 };
 
-static int ata_dma_blacklisted(struct ata_port *ap, struct ata_device *dev)
+static int ata_dma_blacklisted(const struct ata_device *dev)
 {
 	unsigned char model_num[40];
 	char *s;
@@ -2156,9 +2157,9 @@ static int ata_dma_blacklisted(struct ata_port *ap, struct ata_device *dev)
 	return 0;
 }
 
-static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift)
+static unsigned int ata_get_mode_mask(const struct ata_port *ap, int shift)
 {
-	struct ata_device *master, *slave;
+	const struct ata_device *master, *slave;
 	unsigned int mask;
 
 	master = &ap->device[0];
@@ -2170,14 +2171,14 @@ static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift)
 		mask = ap->udma_mask;
 		if (ata_dev_present(master)) {
 			mask &= (master->id[ATA_ID_UDMA_MODES] & 0xff);
-			if (ata_dma_blacklisted(ap, master)) {
+			if (ata_dma_blacklisted(master)) {
 				mask = 0;
 				ata_pr_blacklisted(ap, master);
 			}
 		}
 		if (ata_dev_present(slave)) {
 			mask &= (slave->id[ATA_ID_UDMA_MODES] & 0xff);
-			if (ata_dma_blacklisted(ap, slave)) {
+			if (ata_dma_blacklisted(slave)) {
 				mask = 0;
 				ata_pr_blacklisted(ap, slave);
 			}
@@ -2187,14 +2188,14 @@ static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift)
 		mask = ap->mwdma_mask;
 		if (ata_dev_present(master)) {
 			mask &= (master->id[ATA_ID_MWDMA_MODES] & 0x07);
-			if (ata_dma_blacklisted(ap, master)) {
+			if (ata_dma_blacklisted(master)) {
 				mask = 0;
 				ata_pr_blacklisted(ap, master);
 			}
 		}
 		if (ata_dev_present(slave)) {
 			mask &= (slave->id[ATA_ID_MWDMA_MODES] & 0x07);
-			if (ata_dma_blacklisted(ap, slave)) {
+			if (ata_dma_blacklisted(slave)) {
 				mask = 0;
 				ata_pr_blacklisted(ap, slave);
 			}
@@ -2258,7 +2259,7 @@ static int fgb(u32 bitmap)
  *	Zero on success, negative on error.
  */
 
-static int ata_choose_xfer_mode(struct ata_port *ap,
+static int ata_choose_xfer_mode(const struct ata_port *ap,
 				u8 *xfer_mode_out,
 				unsigned int *xfer_shift_out)
 {
@@ -4144,7 +4145,7 @@ static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister)
 
 static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host,
 			  struct ata_host_set *host_set,
-			  struct ata_probe_ent *ent, unsigned int port_no)
+			  const struct ata_probe_ent *ent, unsigned int port_no)
 {
 	unsigned int i;
 
@@ -4203,7 +4204,7 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host,
  *
  */
 
-static struct ata_port * ata_host_add(struct ata_probe_ent *ent,
+static struct ata_port * ata_host_add(const struct ata_probe_ent *ent,
 				      struct ata_host_set *host_set,
 				      unsigned int port_no)
 {
@@ -4251,7 +4252,7 @@ err_out:
  *
  */
 
-int ata_device_add(struct ata_probe_ent *ent)
+int ata_device_add(const struct ata_probe_ent *ent)
 {
 	unsigned int count = 0, i;
 	struct device *dev = ent->dev;
@@ -4470,7 +4471,7 @@ void ata_std_ports(struct ata_ioports *ioaddr)
 }
 
 static struct ata_probe_ent *
-ata_probe_ent_alloc(struct device *dev, struct ata_port_info *port)
+ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port)
 {
 	struct ata_probe_ent *probe_ent;
 
@@ -4570,7 +4571,6 @@ static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, stru
 	if (!probe_ent)
 		return NULL;
 
-	
 	probe_ent->legacy_mode = 1;
 	probe_ent->n_ports = 1;
 	probe_ent->hard_port_no = port_num;
@@ -4783,7 +4783,7 @@ void ata_pci_remove_one (struct pci_dev *pdev)
 }
 
 /* move to PCI subsystem */
-int pci_test_config_bits(struct pci_dev *pdev, struct pci_bits *bits)
+int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits)
 {
 	unsigned long tmp = 0;
 
-- 
cgit v1.2.3


From 6f0ef4fa57b9ba27d7b1c330bad041f1665501fe Mon Sep 17 00:00:00 2001
From: Randy Dunlap <rdunlap@xenotime.net>
Date: Tue, 25 Oct 2005 01:44:30 -0400
Subject: [PATCH] libata kernel-doc fixes

Correct some function names in kernel-doc.
Add some kernel-doc descriptions.
Fix some typos.
Remove a few blank lines.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
---
 drivers/scsi/libata-core.c | 36 ++++++++++++++----------------------
 1 file changed, 14 insertions(+), 22 deletions(-)

(limited to 'drivers/scsi/libata-core.c')

diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index d55f12dacfc..dcd3b5553cc 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -87,7 +87,7 @@ MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
 
 /**
- *	ata_tf_load - send taskfile registers to host controller
+ *	ata_tf_load_pio - send taskfile registers to host controller
  *	@ap: Port to which output is sent
  *	@tf: ATA taskfile register set
  *
@@ -2701,13 +2701,13 @@ void ata_poll_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
 
 /**
  *	ata_pio_poll -
- *	@ap:
+ *	@ap: the target ata_port
  *
  *	LOCKING:
  *	None.  (executing in kernel thread context)
  *
  *	RETURNS:
- *
+ *	timeout value to use
  */
 
 static unsigned long ata_pio_poll(struct ata_port *ap)
@@ -2748,8 +2748,8 @@ static unsigned long ata_pio_poll(struct ata_port *ap)
 }
 
 /**
- *	ata_pio_complete -
- *	@ap:
+ *	ata_pio_complete - check if drive is busy or idle
+ *	@ap: the target ata_port
  *
  *	LOCKING:
  *	None.  (executing in kernel thread context)
@@ -2801,7 +2801,7 @@ static int ata_pio_complete (struct ata_port *ap)
 
 
 /**
- *	swap_buf_le16 -
+ *	swap_buf_le16 - swap halves of 16-words in place
  *	@buf:  Buffer to swap
  *	@buf_words:  Number of 16-bit words in buffer.
  *
@@ -2810,6 +2810,7 @@ static int ata_pio_complete (struct ata_port *ap)
  *	vice-versa.
  *
  *	LOCKING:
+ *	Inherited from caller.
  */
 void swap_buf_le16(u16 *buf, unsigned int buf_words)
 {
@@ -2832,7 +2833,6 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words)
  *
  *	LOCKING:
  *	Inherited from caller.
- *
  */
 
 static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf,
@@ -2878,7 +2878,6 @@ static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf,
  *
  *	LOCKING:
  *	Inherited from caller.
- *
  */
 
 static void ata_pio_data_xfer(struct ata_port *ap, unsigned char *buf,
@@ -2918,7 +2917,6 @@ static void ata_pio_data_xfer(struct ata_port *ap, unsigned char *buf,
  *
  *	LOCKING:
  *	Inherited from caller.
- *
  */
 
 static void ata_data_xfer(struct ata_port *ap, unsigned char *buf,
@@ -3071,7 +3069,6 @@ next_sg:
  *
  *	LOCKING:
  *	Inherited from caller.
- *
  */
 
 static void atapi_pio_bytes(struct ata_queued_cmd *qc)
@@ -3107,8 +3104,8 @@ err_out:
 }
 
 /**
- *	ata_pio_sector -
- *	@ap:
+ *	ata_pio_block - start PIO on a block
+ *	@ap: the target ata_port
  *
  *	LOCKING:
  *	None.  (executing in kernel thread context)
@@ -3120,7 +3117,7 @@ static void ata_pio_block(struct ata_port *ap)
 	u8 status;
 
 	/*
-	 * This is purely hueristic.  This is a fast path.
+	 * This is purely heuristic.  This is a fast path.
 	 * Sometimes when we enter, BSY will be cleared in
 	 * a chk-status or two.  If not, the drive is probably seeking
 	 * or something.  Snooze for a couple msecs, then
@@ -3440,7 +3437,6 @@ static void __ata_qc_complete(struct ata_queued_cmd *qc)
  *
  *	LOCKING:
  *	spin_lock_irqsave(host_set lock)
- *
  */
 void ata_qc_free(struct ata_queued_cmd *qc)
 {
@@ -3460,7 +3456,6 @@ void ata_qc_free(struct ata_queued_cmd *qc)
  *
  *	LOCKING:
  *	spin_lock_irqsave(host_set lock)
- *
  */
 
 void ata_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
@@ -3954,7 +3949,6 @@ idle_irq:
  *
  *	RETURNS:
  *	IRQ_NONE or IRQ_HANDLED.
- *
  */
 
 irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs)
@@ -4066,6 +4060,7 @@ err_out:
  *	May be used as the port_start() entry in ata_port_operations.
  *
  *	LOCKING:
+ *	Inherited from caller.
  */
 
 int ata_port_start (struct ata_port *ap)
@@ -4091,6 +4086,7 @@ int ata_port_start (struct ata_port *ap)
  *	May be used as the port_stop() entry in ata_port_operations.
  *
  *	LOCKING:
+ *	Inherited from caller.
  */
 
 void ata_port_stop (struct ata_port *ap)
@@ -4113,6 +4109,7 @@ void ata_host_stop (struct ata_host_set *host_set)
  *	@do_unregister: 1 if we fully unregister, 0 to just stop the port
  *
  *	LOCKING:
+ *	Inherited from caller.
  */
 
 static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister)
@@ -4140,7 +4137,6 @@ static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister)
  *
  *	LOCKING:
  *	Inherited from caller.
- *
  */
 
 static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host,
@@ -4201,7 +4197,6 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host,
  *
  *	RETURNS:
  *	New ata_port on success, for NULL on error.
- *
  */
 
 static struct ata_port * ata_host_add(const struct ata_probe_ent *ent,
@@ -4249,7 +4244,6 @@ err_out:
  *
  *	RETURNS:
  *	Number of ports registered.  Zero on error (no ports registered).
- *
  */
 
 int ata_device_add(const struct ata_probe_ent *ent)
@@ -4381,7 +4375,6 @@ err_out:
  *	Inherited from calling layer (may sleep).
  */
 
-
 void ata_host_set_remove(struct ata_host_set *host_set)
 {
 	struct ata_port *ap;
@@ -4614,7 +4607,6 @@ static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, stru
  *
  *	RETURNS:
  *	Zero on success, negative on errno-based value on error.
- *
  */
 
 int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
@@ -4762,7 +4754,7 @@ err_out:
  *	@pdev: PCI device that was removed
  *
  *	PCI layer indicates to libata via this hook that
- *	hot-unplug or module unload event has occured.
+ *	hot-unplug or module unload event has occurred.
  *	Handle this by unregistering all objects associated
  *	with this PCI device.  Free those objects.  Then finally
  *	release PCI resources and disable device.
-- 
cgit v1.2.3


From 91190758d410a5d33c6051ba9ca95baa430256bb Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Wed, 26 Oct 2005 12:17:46 -0400
Subject: [libata] ata_timing fix

---
 drivers/scsi/libata-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/scsi/libata-core.c')

diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index dcd3b5553cc..f53d7b8ac33 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -1616,7 +1616,7 @@ static const struct ata_timing* ata_timing_find_mode(unsigned short speed)
 	const struct ata_timing *t;
 
 	for (t = ata_timing; t->mode != speed; t++)
-		if (t->mode != 0xFF)
+		if (t->mode == 0xFF)
 			return NULL;
 	return t; 
 }
-- 
cgit v1.2.3