From 0565c26de7b2c069add553106f210b3128b67785 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Mon, 13 Feb 2006 18:55:25 +0800 Subject: [PATCH] libata: minor fix for 2.6.16-rc3 - Fix the array index value in ata_rwcmd_protocol() for the added FUA commands. - Filter out ATAPI packet command error messages in ata_pio_error() Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/scsi/libata-core.c') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 46c4cdbaee8..7ddd5a69352 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -614,7 +614,7 @@ int ata_rwcmd_protocol(struct ata_queued_cmd *qc) } else if (lba48 && (qc->ap->flags & ATA_FLAG_PIO_LBA48)) { /* Unable to use DMA due to host limitation */ tf->protocol = ATA_PROT_PIO; - index = dev->multi_count ? 0 : 4; + index = dev->multi_count ? 0 : 8; } else { tf->protocol = ATA_PROT_DMA; index = 16; @@ -3357,11 +3357,12 @@ static void ata_pio_error(struct ata_port *ap) { struct ata_queued_cmd *qc; - printk(KERN_WARNING "ata%u: PIO error\n", ap->id); - qc = ata_qc_from_tag(ap, ap->active_tag); assert(qc != NULL); + if (qc->tf.command != ATA_CMD_PACKET) + printk(KERN_WARNING "ata%u: PIO error\n", ap->id); + /* make sure qc->err_mask is available to * know what's wrong and recover */ -- cgit v1.2.3 From 9ae61c6cb69f5251d160576c324948805f97e901 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 20 Feb 2006 23:48:37 +0900 Subject: [PATCH] libata: fix WARN_ON() condition in *_fill_sg() For ATAPI commands, padding can reduce qc->n_elem by one and thus to zero making assert(qc->n_elem > 0)'s in ata_fill_sg() and qs_fill_sg() fail for legal commands. This patch fixes the assert()'s to take qc->pad_len into account. Although the condition check seems a bit excessive, as this part of code isn't still stable yet, I think it's worth to keep those. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/scsi/libata-core.c') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 7ddd5a69352..bbac87a13d5 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2570,7 +2570,7 @@ static void ata_fill_sg(struct ata_queued_cmd *qc) unsigned int idx; assert(qc->__sg != NULL); - assert(qc->n_elem > 0); + assert(qc->n_elem > 0 || qc->pad_len > 0); idx = 0; ata_for_each_sg(sg, qc) { -- cgit v1.2.3 From 2e242fa994428bd1a40b6a7e97430413246d0a16 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 20 Feb 2006 23:48:38 +0900 Subject: [PATCH] libata: make ata_sg_setup_one() trim zero length sg This patch makes ata_sg_setup_one() trim sg entry (thus making qc->n_elem zero) if padding results in zero length sg entry. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers/scsi/libata-core.c') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index bbac87a13d5..5f1d7580218 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2514,7 +2514,7 @@ static void ata_sg_clean(struct ata_queued_cmd *qc) assert(sg != NULL); if (qc->flags & ATA_QCFLAG_SINGLE) - assert(qc->n_elem == 1); + assert(qc->n_elem <= 1); VPRINTK("unmapping %u sg elements\n", qc->n_elem); @@ -2537,7 +2537,7 @@ static void ata_sg_clean(struct ata_queued_cmd *qc) kunmap_atomic(addr, KM_IRQ0); } } else { - if (sg_dma_len(&sg[0]) > 0) + if (qc->n_elem) dma_unmap_single(ap->host_set->dev, sg_dma_address(&sg[0]), sg_dma_len(&sg[0]), dir); @@ -2715,6 +2715,7 @@ static int ata_sg_setup_one(struct ata_queued_cmd *qc) int dir = qc->dma_dir; struct scatterlist *sg = qc->__sg; dma_addr_t dma_address; + int trim_sg = 0; /* we must lengthen transfers to end on a 32-bit boundary */ qc->pad_len = sg->length & 3; @@ -2734,13 +2735,15 @@ static int ata_sg_setup_one(struct ata_queued_cmd *qc) sg_dma_len(psg) = ATA_DMA_PAD_SZ; /* trim sg */ sg->length -= qc->pad_len; + if (sg->length == 0) + trim_sg = 1; DPRINTK("padding done, sg->length=%u pad_len=%u\n", sg->length, qc->pad_len); } - if (!sg->length) { - sg_dma_address(sg) = 0; + if (trim_sg) { + qc->n_elem--; goto skip_map; } @@ -2753,9 +2756,9 @@ static int ata_sg_setup_one(struct ata_queued_cmd *qc) } sg_dma_address(sg) = dma_address; -skip_map: sg_dma_len(sg) = sg->length; +skip_map: DPRINTK("mapped buffer of %d bytes for %s\n", sg_dma_len(sg), qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); -- cgit v1.2.3 From c3c013a2c218cdede2d2e73df01ed4f813538941 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Mon, 27 Feb 2006 22:31:19 -0500 Subject: [libata] Disable FUA Until problems are sorted. --- drivers/scsi/libata-core.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/scsi/libata-core.c') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 5f1d7580218..4f91b0dc572 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -82,6 +82,10 @@ int atapi_enabled = 0; module_param(atapi_enabled, int, 0444); MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)"); +int libata_fua = 0; +module_param_named(fua, libata_fua, int, 0444); +MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)"); + MODULE_AUTHOR("Jeff Garzik"); MODULE_DESCRIPTION("Library module for ATA devices"); MODULE_LICENSE("GPL"); -- cgit v1.2.3