From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@ppc970.osdl.org>
Date: Sat, 16 Apr 2005 15:20:36 -0700
Subject: Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
---
 drivers/scsi/pcmcia/nsp_message.c | 78 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 78 insertions(+)
 create mode 100644 drivers/scsi/pcmcia/nsp_message.c

(limited to 'drivers/scsi/pcmcia/nsp_message.c')

diff --git a/drivers/scsi/pcmcia/nsp_message.c b/drivers/scsi/pcmcia/nsp_message.c
new file mode 100644
index 00000000000..d7057737ff3
--- /dev/null
+++ b/drivers/scsi/pcmcia/nsp_message.c
@@ -0,0 +1,78 @@
+/*==========================================================================
+  NinjaSCSI-3 message handler
+      By: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
+
+   This software may be used and distributed according to the terms of
+   the GNU General Public License.
+ */
+
+/* $Id: nsp_message.c,v 1.6 2003/07/26 14:21:09 elca Exp $ */
+
+static void nsp_message_in(Scsi_Cmnd *SCpnt)
+{
+	unsigned int  base = SCpnt->device->host->io_port;
+	nsp_hw_data  *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
+	unsigned char data_reg, control_reg;
+	int           ret, len;
+
+	/*
+	 * XXX: NSP QUIRK
+	 * NSP invoke interrupts only in the case of scsi phase changes,
+	 * therefore we should poll the scsi phase here to catch 
+	 * the next "msg in" if exists (no scsi phase changes).
+	 */
+	ret = 16;
+	len = 0;
+
+	nsp_dbg(NSP_DEBUG_MSGINOCCUR, "msgin loop");
+	do {
+		/* read data */
+		data_reg = nsp_index_read(base, SCSIDATAIN);
+
+		/* assert ACK */
+		control_reg = nsp_index_read(base, SCSIBUSCTRL);
+		control_reg |= SCSI_ACK;
+		nsp_index_write(base, SCSIBUSCTRL, control_reg);
+		nsp_negate_signal(SCpnt, BUSMON_REQ, "msgin<REQ>");
+
+		data->MsgBuffer[len] = data_reg; len++;
+
+		/* deassert ACK */
+		control_reg =  nsp_index_read(base, SCSIBUSCTRL);
+		control_reg &= ~SCSI_ACK;
+		nsp_index_write(base, SCSIBUSCTRL, control_reg);
+
+		/* catch a next signal */
+		ret = nsp_expect_signal(SCpnt, BUSPHASE_MESSAGE_IN, BUSMON_REQ);
+	} while (ret > 0 && MSGBUF_SIZE > len);
+
+	data->MsgLen = len;
+
+}
+
+static void nsp_message_out(Scsi_Cmnd *SCpnt)
+{
+	nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
+	int ret = 1;
+	int len = data->MsgLen;
+
+	/*
+	 * XXX: NSP QUIRK
+	 * NSP invoke interrupts only in the case of scsi phase changes,
+	 * therefore we should poll the scsi phase here to catch 
+	 * the next "msg out" if exists (no scsi phase changes).
+	 */
+
+	nsp_dbg(NSP_DEBUG_MSGOUTOCCUR, "msgout loop");
+	do {
+		if (nsp_xfer(SCpnt, BUSPHASE_MESSAGE_OUT)) {
+			nsp_msg(KERN_DEBUG, "msgout: xfer short");
+		}
+
+		/* catch a next signal */
+		ret = nsp_expect_signal(SCpnt, BUSPHASE_MESSAGE_OUT, BUSMON_REQ);
+	} while (ret > 0 && len-- > 0);
+
+}
+
+/* end */
-- 
cgit v1.2.3