From 33dd6f92a1a7ad85c54d47fd9d73371a32c0bde4 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 20 Feb 2009 06:53:48 -0700 Subject: [SCSI] sd: Don't try to spin up drives that are connected to an inactive port We currently try to spin up drives connected to standby and unavailable ports. This will never succeed and wastes a lot of time. Fail quickly if the sense data reports the port is in standby or unavailable state. Reported-by: Narayanan Rengarajan Tested-by: Narayanan Rengarajan Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley --- drivers/scsi/sd.c | 26 +++++++++++--------------- 1 file changed, 11 insertions(+), 15 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 55310dbc10a..4970ae4a62d 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1167,23 +1167,19 @@ sd_spinup_disk(struct scsi_disk *sdkp) /* * The device does not want the automatic start to be issued. */ - if (sdkp->device->no_start_on_add) { + if (sdkp->device->no_start_on_add) break; - } - - /* - * If manual intervention is required, or this is an - * absent USB storage device, a spinup is meaningless. - */ - if (sense_valid && - sshdr.sense_key == NOT_READY && - sshdr.asc == 4 && sshdr.ascq == 3) { - break; /* manual intervention required */ - /* - * Issue command to spin up drive when not ready - */ - } else if (sense_valid && sshdr.sense_key == NOT_READY) { + if (sense_valid && sshdr.sense_key == NOT_READY) { + if (sshdr.asc == 4 && sshdr.ascq == 3) + break; /* manual intervention required */ + if (sshdr.asc == 4 && sshdr.ascq == 0xb) + break; /* standby */ + if (sshdr.asc == 4 && sshdr.ascq == 0xc) + break; /* unavailable */ + /* + * Issue command to spin up drive when not ready + */ if (!spintime) { sd_printk(KERN_NOTICE, sdkp, "Spinning up disk..."); cmd[0] = START_STOP; -- cgit v1.2.3 From 1f6ff364ceda516f88351a8ab640e656beed0b26 Mon Sep 17 00:00:00 2001 From: Abhijeet Joglekar Date: Fri, 27 Feb 2009 10:54:35 -0800 Subject: [SCSI] libfc: Pass lport in exch_mgr_reset fc_exch_mgr structure is private to fc_exch.c. To export exch_mgr_reset to transport, transport needs access to the exch manager. Change exch_mgr_reset to use lport param which is the shared structure between libFC and transport. Alternatively, fc_exch_mgr definition can be moved to libfc.h so that lport can be accessed from mp*. Signed-off-by: Abhijeet Joglekar Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_exch.c | 3 ++- drivers/scsi/libfc/fc_lport.c | 4 ++-- drivers/scsi/libfc/fc_rport.c | 4 ++-- 3 files changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index 66db08a5f27..a09416fd843 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -1480,10 +1480,11 @@ static void fc_exch_reset(struct fc_exch *ep) * If sid is non-zero, reset only exchanges we source from that FID. * If did is non-zero, reset only exchanges destined to that FID. */ -void fc_exch_mgr_reset(struct fc_exch_mgr *mp, u32 sid, u32 did) +void fc_exch_mgr_reset(struct fc_lport *lp, u32 sid, u32 did) { struct fc_exch *ep; struct fc_exch *next; + struct fc_exch_mgr *mp = lp->emp; spin_lock_bh(&mp->em_lock); restart: diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index 0b9bdb1fb80..5db223ce3b2 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -663,7 +663,7 @@ int fc_lport_destroy(struct fc_lport *lport) { lport->tt.frame_send = fc_frame_drop; lport->tt.fcp_abort_io(lport); - lport->tt.exch_mgr_reset(lport->emp, 0, 0); + lport->tt.exch_mgr_reset(lport, 0, 0); return 0; } EXPORT_SYMBOL(fc_lport_destroy); @@ -973,7 +973,7 @@ static void fc_lport_enter_reset(struct fc_lport *lport) lport->tt.disc_stop(lport); - lport->tt.exch_mgr_reset(lport->emp, 0, 0); + lport->tt.exch_mgr_reset(lport, 0, 0); fc_host_fabric_name(lport->host) = 0; fc_host_port_id(lport->host) = 0; diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index e780d8caf70..dec7bae0e56 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -1285,7 +1285,7 @@ void fc_rport_terminate_io(struct fc_rport *rport) struct fc_rport_libfc_priv *rdata = rport->dd_data; struct fc_lport *lport = rdata->local_port; - lport->tt.exch_mgr_reset(lport->emp, 0, rport->port_id); - lport->tt.exch_mgr_reset(lport->emp, rport->port_id, 0); + lport->tt.exch_mgr_reset(lport, 0, rport->port_id); + lport->tt.exch_mgr_reset(lport, rport->port_id, 0); } EXPORT_SYMBOL(fc_rport_terminate_io); -- cgit v1.2.3 From 571f824c3cd7b7f5a40ba100f7e576b6b0fe826a Mon Sep 17 00:00:00 2001 From: Abhijeet Joglekar Date: Fri, 27 Feb 2009 10:54:41 -0800 Subject: [SCSI] libfc: when rport goes away (re-plogi), clean up exchanges to/from rport When a rport goes away, libFC does a plogi which will reset exchanges at the rport. Clean exchanges at our end, both in transport and libFC. If transport hooks into exch_mgr_reset, it will call back into fc_exch_mgr_reset() to clean up libFC exchanges. Signed-off-by: Abhijeet Joglekar Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_rport.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index dec7bae0e56..71757593415 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -214,6 +214,7 @@ static void fc_rport_state_enter(struct fc_rport *rport, static void fc_rport_work(struct work_struct *work) { + u32 port_id; struct fc_rport_libfc_priv *rdata = container_of(work, struct fc_rport_libfc_priv, event_work); enum fc_rport_event event; @@ -279,8 +280,12 @@ static void fc_rport_work(struct work_struct *work) rport_ops->event_callback(lport, rport, event); if (trans_state == FC_PORTSTATE_ROGUE) put_device(&rport->dev); - else + else { + port_id = rport->port_id; fc_remote_port_delete(rport); + lport->tt.exch_mgr_reset(lport, 0, port_id); + lport->tt.exch_mgr_reset(lport, port_id, 0); + } } else mutex_unlock(&rdata->rp_mutex); } -- cgit v1.2.3 From 78342da3682ec843e3e6301af5c723c88a46c408 Mon Sep 17 00:00:00 2001 From: Vasu Dev Date: Fri, 27 Feb 2009 10:54:46 -0800 Subject: [SCSI] libfc: handle RRQ exch timeout Cleanup exchange held due to RRQ when RRQ exch times out, in this case the ABTS is already done causing RRQ req therefore proceeding with cleanup in fc_exch_rrq_resp should be okay to restore exch resource. Signed-off-by: Vasu Dev Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_exch.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index a09416fd843..e874e77b740 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -1608,7 +1608,7 @@ static void fc_exch_rrq_resp(struct fc_seq *sp, struct fc_frame *fp, void *arg) if (IS_ERR(fp)) { int err = PTR_ERR(fp); - if (err == -FC_EX_CLOSED) + if (err == -FC_EX_CLOSED || err == -FC_EX_TIMEOUT) goto cleanup; FC_DBG("Cannot process RRQ, because of frame error %d\n", err); return; -- cgit v1.2.3 From a7e84f2b83f17f8f11da34ccef3ba5a862dc0182 Mon Sep 17 00:00:00 2001 From: Vasu Dev Date: Fri, 27 Feb 2009 10:54:51 -0800 Subject: [SCSI] libfc: fixed a soft lockup issue in fc_exch_recv_abts The fc_seq_start_next grabs ep->ex_lock but this lock was already held here, so instead called fc_seq_start_next_locked to avoid soft lockup. Signed-off-by: Vasu Dev Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_exch.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index e874e77b740..dd269e5f953 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -1096,7 +1096,7 @@ static void fc_exch_recv_abts(struct fc_exch *ep, struct fc_frame *rx_fp) ap->ba_high_seq_cnt = fh->fh_seq_cnt; ap->ba_low_seq_cnt = htons(sp->cnt); } - sp = fc_seq_start_next(sp); + sp = fc_seq_start_next_locked(sp); spin_unlock_bh(&ep->ex_lock); fc_seq_send_last(sp, fp, FC_RCTL_BA_ACC, FC_TYPE_BLS); fc_frame_free(rx_fp); -- cgit v1.2.3 From bc0e17f691085315ae9303eb5b0883fe16dfe6b1 Mon Sep 17 00:00:00 2001 From: Vasu Dev Date: Fri, 27 Feb 2009 10:54:57 -0800 Subject: [SCSI] libfc, fcoe: fixed locking issues with lport->lp_mutex around lport->link_status The fcoe_xmit could call fc_pause in case the pending skb queue len is larger than FCOE_MAX_QUEUE_DEPTH, the fc_pause was trying to grab lport->lp_muex to change lport->link_status and that had these issues :- 1. The fcoe_xmit was getting called with bh disabled, thus causing "BUG: scheduling while atomic" when grabbing lport->lp_muex with bh disabled. 2. fc_linkup and fc_linkdown function calls lport_enter function with lport->lp_mutex held and these enter function in turn calls fcoe_xmit to send lport related FC frame, e.g. fc_linkup => fc_lport_enter_flogi to send flogi req. In this case grabbing the same lport->lp_mutex again in fc_puase from fcoe_xmit would cause deadlock. The lport->lp_mutex was used for setting FC_PAUSE in fcoe_xmit path but FC_PAUSE bit was not used anywhere beside just setting and clear this bit in lport->link_status, instead used a separate field qfull in fc_lport to eliminate need for lport->lp_mutex to track pending queue full condition and in turn avoid above described two locking issues. Also added check for lp->qfull in fc_fcp_lport_queue_ready to trigger SCSI_MLQUEUE_HOST_BUSY when lp->qfull is set to prevent more scsi-ml cmds while lp->qfull is set. This patch eliminated FC_LINK_UP and FC_PAUSE and instead used dedicated fields in fc_lport for this, this simplified all related conditional code. Also removed fc_pause and fc_unpause functions and instead used newly added lport->qfull directly in fcoe. Signed-off-by: Vasu Dev Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fcoe_sw.c | 6 +++--- drivers/scsi/fcoe/libfcoe.c | 41 +++++++++++++++++------------------------ drivers/scsi/libfc/fc_fcp.c | 4 ++-- drivers/scsi/libfc/fc_lport.c | 36 ++++++------------------------------ 4 files changed, 28 insertions(+), 59 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/fcoe/fcoe_sw.c b/drivers/scsi/fcoe/fcoe_sw.c index dc4cd5e2576..cf83675a0fb 100644 --- a/drivers/scsi/fcoe/fcoe_sw.c +++ b/drivers/scsi/fcoe/fcoe_sw.c @@ -116,7 +116,8 @@ static int fcoe_sw_lport_config(struct fc_lport *lp) { int i = 0; - lp->link_status = 0; + lp->link_up = 0; + lp->qfull = 0; lp->max_retry_count = 3; lp->e_d_tov = 2 * 1000; /* FC-FS default */ lp->r_a_tov = 2 * 2 * 1000; @@ -181,9 +182,8 @@ static int fcoe_sw_netdev_config(struct fc_lport *lp, struct net_device *netdev) if (fc_set_mfs(lp, mfs)) return -EINVAL; - lp->link_status = ~FC_PAUSE & ~FC_LINK_UP; if (!fcoe_link_ok(lp)) - lp->link_status |= FC_LINK_UP; + lp->link_up = 1; /* offload features support */ if (fc->real_dev->features & NETIF_F_SG) diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index e419f486cdb..296071043f5 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -504,7 +504,7 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp) if (rc) { fcoe_insert_wait_queue(lp, skb); if (fc->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH) - fc_pause(lp); + lp->qfull = 1; } return 0; @@ -718,7 +718,7 @@ static void fcoe_recv_flogi(struct fcoe_softc *fc, struct fc_frame *fp, u8 *sa) * fcoe_watchdog - fcoe timer callback * @vp: * - * This checks the pending queue length for fcoe and put fcoe to be paused state + * This checks the pending queue length for fcoe and set lport qfull * if the FCOE_MAX_QUEUE_DEPTH is reached. This is done for all fc_lport on the * fcoe_hostlist. * @@ -728,17 +728,17 @@ void fcoe_watchdog(ulong vp) { struct fc_lport *lp; struct fcoe_softc *fc; - int paused = 0; + int qfilled = 0; read_lock(&fcoe_hostlist_lock); list_for_each_entry(fc, &fcoe_hostlist, list) { lp = fc->lp; if (lp) { if (fc->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH) - paused = 1; + qfilled = 1; if (fcoe_check_wait_queue(lp) < FCOE_MAX_QUEUE_DEPTH) { - if (paused) - fc_unpause(lp); + if (qfilled) + lp->qfull = 0; } } } @@ -767,8 +767,7 @@ void fcoe_watchdog(ulong vp) **/ static int fcoe_check_wait_queue(struct fc_lport *lp) { - int rc, unpause = 0; - int paused = 0; + int rc; struct sk_buff *skb; struct fcoe_softc *fc; @@ -776,10 +775,10 @@ static int fcoe_check_wait_queue(struct fc_lport *lp) spin_lock_bh(&fc->fcoe_pending_queue.lock); /* - * is this interface paused? + * if interface pending queue full then set qfull in lport. */ if (fc->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH) - paused = 1; + lp->qfull = 1; if (fc->fcoe_pending_queue.qlen) { while ((skb = __skb_dequeue(&fc->fcoe_pending_queue)) != NULL) { spin_unlock_bh(&fc->fcoe_pending_queue.lock); @@ -791,11 +790,9 @@ static int fcoe_check_wait_queue(struct fc_lport *lp) spin_lock_bh(&fc->fcoe_pending_queue.lock); } if (fc->fcoe_pending_queue.qlen < FCOE_MAX_QUEUE_DEPTH) - unpause = 1; + lp->qfull = 0; } spin_unlock_bh(&fc->fcoe_pending_queue.lock); - if ((unpause) && (paused)) - fc_unpause(lp); return fc->fcoe_pending_queue.qlen; } @@ -873,7 +870,7 @@ static int fcoe_device_notification(struct notifier_block *notifier, struct net_device *real_dev = ptr; struct fcoe_softc *fc; struct fcoe_dev_stats *stats; - u16 new_status; + u32 new_link_up; u32 mfs; int rc = NOTIFY_OK; @@ -890,17 +887,15 @@ static int fcoe_device_notification(struct notifier_block *notifier, goto out; } - new_status = lp->link_status; + new_link_up = lp->link_up; switch (event) { case NETDEV_DOWN: case NETDEV_GOING_DOWN: - new_status &= ~FC_LINK_UP; + new_link_up = 0; break; case NETDEV_UP: case NETDEV_CHANGE: - new_status &= ~FC_LINK_UP; - if (!fcoe_link_ok(lp)) - new_status |= FC_LINK_UP; + new_link_up = !fcoe_link_ok(lp); break; case NETDEV_CHANGEMTU: mfs = fc->real_dev->mtu - @@ -908,17 +903,15 @@ static int fcoe_device_notification(struct notifier_block *notifier, sizeof(struct fcoe_crc_eof)); if (mfs >= FC_MIN_MAX_FRAME) fc_set_mfs(lp, mfs); - new_status &= ~FC_LINK_UP; - if (!fcoe_link_ok(lp)) - new_status |= FC_LINK_UP; + new_link_up = !fcoe_link_ok(lp); break; case NETDEV_REGISTER: break; default: FC_DBG("unknown event %ld call", event); } - if (lp->link_status != new_status) { - if ((new_status & FC_LINK_UP) == FC_LINK_UP) + if (lp->link_up != new_link_up) { + if (new_link_up) fc_linkup(lp); else { stats = lp->dev_stats[smp_processor_id()]; diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index 404e63ff46b..f440aaca39c 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -1621,7 +1621,7 @@ out: static inline int fc_fcp_lport_queue_ready(struct fc_lport *lp) { /* lock ? */ - return (lp->state == LPORT_ST_READY) && (lp->link_status & FC_LINK_UP); + return (lp->state == LPORT_ST_READY) && lp->link_up && !lp->qfull; } /** @@ -1890,7 +1890,7 @@ int fc_eh_abort(struct scsi_cmnd *sc_cmd) lp = shost_priv(sc_cmd->device->host); if (lp->state != LPORT_ST_READY) return rc; - else if (!(lp->link_status & FC_LINK_UP)) + else if (!lp->link_up) return rc; spin_lock_irqsave(lp->host->host_lock, flags); diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index 5db223ce3b2..a6ab692f5f5 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -250,7 +250,7 @@ void fc_get_host_port_state(struct Scsi_Host *shost) { struct fc_lport *lp = shost_priv(shost); - if ((lp->link_status & FC_LINK_UP) == FC_LINK_UP) + if (lp->link_up) fc_host_port_state(shost) = FC_PORTSTATE_ONLINE; else fc_host_port_state(shost) = FC_PORTSTATE_OFFLINE; @@ -577,8 +577,8 @@ void fc_linkup(struct fc_lport *lport) fc_host_port_id(lport->host)); mutex_lock(&lport->lp_mutex); - if ((lport->link_status & FC_LINK_UP) != FC_LINK_UP) { - lport->link_status |= FC_LINK_UP; + if (!lport->link_up) { + lport->link_up = 1; if (lport->state == LPORT_ST_RESET) fc_lport_enter_flogi(lport); @@ -597,8 +597,8 @@ void fc_linkdown(struct fc_lport *lport) FC_DEBUG_LPORT("Link is down for port (%6x)\n", fc_host_port_id(lport->host)); - if ((lport->link_status & FC_LINK_UP) == FC_LINK_UP) { - lport->link_status &= ~(FC_LINK_UP); + if (lport->link_up) { + lport->link_up = 0; fc_lport_enter_reset(lport); lport->tt.fcp_cleanup(lport); } @@ -606,30 +606,6 @@ void fc_linkdown(struct fc_lport *lport) } EXPORT_SYMBOL(fc_linkdown); -/** - * fc_pause - Pause the flow of frames - * @lport: The lport to be paused - */ -void fc_pause(struct fc_lport *lport) -{ - mutex_lock(&lport->lp_mutex); - lport->link_status |= FC_PAUSE; - mutex_unlock(&lport->lp_mutex); -} -EXPORT_SYMBOL(fc_pause); - -/** - * fc_unpause - Unpause the flow of frames - * @lport: The lport to be unpaused - */ -void fc_unpause(struct fc_lport *lport) -{ - mutex_lock(&lport->lp_mutex); - lport->link_status &= ~(FC_PAUSE); - mutex_unlock(&lport->lp_mutex); -} -EXPORT_SYMBOL(fc_unpause); - /** * fc_fabric_logoff - Logout of the fabric * @lport: fc_lport pointer to logoff the fabric @@ -977,7 +953,7 @@ static void fc_lport_enter_reset(struct fc_lport *lport) fc_host_fabric_name(lport->host) = 0; fc_host_port_id(lport->host) = 0; - if ((lport->link_status & FC_LINK_UP) == FC_LINK_UP) + if (lport->link_up) fc_lport_enter_flogi(lport); } -- cgit v1.2.3 From 6755db1cd4587084be85f860b7aa7c0cc9d776dc Mon Sep 17 00:00:00 2001 From: Chris Leech Date: Fri, 27 Feb 2009 10:55:02 -0800 Subject: [SCSI] libfc: rport retry on LS_RJT from certain ELS This allows any rport ELS to retry on LS_RJT. The rport error handling would only retry on resource allocation failures and exchange timeouts. I have a target that will occasionally reject PLOGI when we do a quick LOGO/PLOGI. When a critical ELS was rejected, libfc would fail silently leaving the rport in a dead state. The retry count and delay are managed by fc_rport_error_retry. If the retry count is exceeded fc_rport_error will be called. When retrying is not the correct course of action, fc_rport_error can be called directly. Signed-off-by: Chris Leech Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_exch.c | 2 - drivers/scsi/libfc/fc_rport.c | 111 ++++++++++++++++++++++++------------------ 2 files changed, 64 insertions(+), 49 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index dd269e5f953..8c4018956d4 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -32,8 +32,6 @@ #include #include -#define FC_DEF_R_A_TOV (10 * 1000) /* resource allocation timeout */ - /* * fc_exch_debug can be set in debugger or at compile time to get more logs. */ diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index 71757593415..600a8fffa94 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -81,6 +81,7 @@ static void fc_rport_recv_logo_req(struct fc_rport *, struct fc_seq *, struct fc_frame *); static void fc_rport_timeout(struct work_struct *); static void fc_rport_error(struct fc_rport *, struct fc_frame *); +static void fc_rport_error_retry(struct fc_rport *, struct fc_frame *); static void fc_rport_work(struct work_struct *); static const char *fc_rport_state_names[] = { @@ -410,57 +411,73 @@ static void fc_rport_timeout(struct work_struct *work) } /** - * fc_rport_error - Handler for any errors + * fc_rport_error - Error handler, called once retries have been exhausted * @rport: The fc_rport object * @fp: The frame pointer * - * If the error was caused by a resource allocation failure - * then wait for half a second and retry, otherwise retry - * immediately. - * * Locking Note: The rport lock is expected to be held before * calling this routine */ static void fc_rport_error(struct fc_rport *rport, struct fc_frame *fp) { struct fc_rport_libfc_priv *rdata = rport->dd_data; - unsigned long delay = 0; FC_DEBUG_RPORT("Error %ld in state %s, retries %d\n", PTR_ERR(fp), fc_rport_state(rport), rdata->retries); - if (!fp || PTR_ERR(fp) == -FC_EX_TIMEOUT) { - /* - * Memory allocation failure, or the exchange timed out. - * Retry after delay - */ - if (rdata->retries < rdata->local_port->max_retry_count) { - rdata->retries++; - if (!fp) - delay = msecs_to_jiffies(500); - get_device(&rport->dev); - schedule_delayed_work(&rdata->retry_work, delay); - } else { - switch (rdata->rp_state) { - case RPORT_ST_PLOGI: - case RPORT_ST_PRLI: - case RPORT_ST_LOGO: - rdata->event = RPORT_EV_FAILED; - queue_work(rport_event_queue, - &rdata->event_work); - break; - case RPORT_ST_RTV: - fc_rport_enter_ready(rport); - break; - case RPORT_ST_NONE: - case RPORT_ST_READY: - case RPORT_ST_INIT: - break; - } - } + switch (rdata->rp_state) { + case RPORT_ST_PLOGI: + case RPORT_ST_PRLI: + case RPORT_ST_LOGO: + rdata->event = RPORT_EV_FAILED; + queue_work(rport_event_queue, + &rdata->event_work); + break; + case RPORT_ST_RTV: + fc_rport_enter_ready(rport); + break; + case RPORT_ST_NONE: + case RPORT_ST_READY: + case RPORT_ST_INIT: + break; } } +/** + * fc_rport_error_retry - Error handler when retries are desired + * @rport: The fc_rport object + * @fp: The frame pointer + * + * If the error was an exchange timeout retry immediately, + * otherwise wait for E_D_TOV. + * + * Locking Note: The rport lock is expected to be held before + * calling this routine + */ +static void fc_rport_error_retry(struct fc_rport *rport, struct fc_frame *fp) +{ + struct fc_rport_libfc_priv *rdata = rport->dd_data; + unsigned long delay = FC_DEF_E_D_TOV; + + /* make sure this isn't an FC_EX_CLOSED error, never retry those */ + if (PTR_ERR(fp) == -FC_EX_CLOSED) + return fc_rport_error(rport, fp); + + if (rdata->retries < rdata->local_port->max_retry_count) { + FC_DEBUG_RPORT("Error %ld in state %s, retrying\n", + PTR_ERR(fp), fc_rport_state(rport)); + rdata->retries++; + /* no additional delay on exchange timeouts */ + if (PTR_ERR(fp) == -FC_EX_TIMEOUT) + delay = 0; + get_device(&rport->dev); + schedule_delayed_work(&rdata->retry_work, delay); + return; + } + + return fc_rport_error(rport, fp); +} + /** * fc_rport_plogi_recv_resp - Handle incoming ELS PLOGI response * @sp: current sequence in the PLOGI exchange @@ -495,7 +512,7 @@ static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp, } if (IS_ERR(fp)) { - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); goto err; } @@ -527,7 +544,7 @@ static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp, else fc_rport_enter_prli(rport); } else - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); out: fc_frame_free(fp); @@ -557,14 +574,14 @@ static void fc_rport_enter_plogi(struct fc_rport *rport) rport->maxframe_size = FC_MIN_MAX_PAYLOAD; fp = fc_frame_alloc(lport, sizeof(struct fc_els_flogi)); if (!fp) { - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); return; } rdata->e_d_tov = lport->e_d_tov; if (!lport->tt.elsct_send(lport, rport, fp, ELS_PLOGI, fc_rport_plogi_resp, rport, lport->e_d_tov)) - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); else get_device(&rport->dev); } @@ -604,7 +621,7 @@ static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp, } if (IS_ERR(fp)) { - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); goto err; } @@ -662,7 +679,7 @@ static void fc_rport_logo_resp(struct fc_seq *sp, struct fc_frame *fp, rport->port_id); if (IS_ERR(fp)) { - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); goto err; } @@ -712,13 +729,13 @@ static void fc_rport_enter_prli(struct fc_rport *rport) fp = fc_frame_alloc(lport, sizeof(*pp)); if (!fp) { - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); return; } if (!lport->tt.elsct_send(lport, rport, fp, ELS_PRLI, fc_rport_prli_resp, rport, lport->e_d_tov)) - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); else get_device(&rport->dev); } @@ -809,13 +826,13 @@ static void fc_rport_enter_rtv(struct fc_rport *rport) fp = fc_frame_alloc(lport, sizeof(struct fc_els_rtv)); if (!fp) { - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); return; } if (!lport->tt.elsct_send(lport, rport, fp, ELS_RTV, fc_rport_rtv_resp, rport, lport->e_d_tov)) - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); else get_device(&rport->dev); } @@ -840,13 +857,13 @@ static void fc_rport_enter_logo(struct fc_rport *rport) fp = fc_frame_alloc(lport, sizeof(struct fc_els_logo)); if (!fp) { - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); return; } if (!lport->tt.elsct_send(lport, rport, fp, ELS_LOGO, fc_rport_logo_resp, rport, lport->e_d_tov)) - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); else get_device(&rport->dev); } -- cgit v1.2.3 From 26d9cab558f901051d0b69b2c445c8588931ce8d Mon Sep 17 00:00:00 2001 From: Vasu Dev Date: Fri, 27 Feb 2009 10:55:07 -0800 Subject: [SCSI] libfc: fixed a read IO data integrity issue when a IO data frame lost The fc_fcp_complete_locked detected data underrun in this case and set the FC_DATA_UNDRUN but that was ignored by fc_io_compl for all cases including read underrun. Added code to not to ignore FC_DATA_UNDRUN for read IO and instead suggested scsi-ml to retry cmd to recover from lost data frame. Not sure if it is okay to ignore FC_DATA_UNDRUN for other case, so let code as is for other cases but removed or-ing with zero valued fsp->cdb_status for those cases. Signed-off-by: Vasu Dev Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_fcp.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index f440aaca39c..ecc72612c38 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -1810,12 +1810,12 @@ static void fc_io_compl(struct fc_fcp_pkt *fsp) sc_cmd->result = DID_ERROR << 16; break; case FC_DATA_UNDRUN: - if (fsp->cdb_status == 0) { + if ((fsp->cdb_status == 0) && !(fsp->req_flags & FC_SRB_READ)) { /* * scsi status is good but transport level - * underrun. for read it should be an error?? + * underrun. */ - sc_cmd->result = (DID_OK << 16) | fsp->cdb_status; + sc_cmd->result = DID_OK << 16; } else { /* * scsi got underrun, this is an error -- cgit v1.2.3 From f7db2c150cf5082cf74555f30a1305938041de80 Mon Sep 17 00:00:00 2001 From: Steve Ma Date: Fri, 27 Feb 2009 10:55:13 -0800 Subject: [SCSI] libfc: exch mgr is freed while lport still retrying sequences When a sequence cannot be delivered to the target, the local port will schedule retries, While this process is in progress, if we destroy the FCoE interface, the fcoe_sw_destroy routine is entered, and the fc_exch_mgr_free(lp->emp) is called. Thus if fc_exch_alloc() is called when retrying the sequence, the mempool_alloc() will fail to allocate the exchange because the mempool of the exchange manager has already been released. This patch is to cancel any pending retry work of the local port before we start to destroy the interface. Also, when resetting the local port, we should also stop the scheduled pending retries. Signed-off-by: Steve Ma Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_lport.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index a6ab692f5f5..e6ea4f11953 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -619,6 +619,7 @@ int fc_fabric_logoff(struct fc_lport *lport) mutex_lock(&lport->lp_mutex); fc_lport_enter_logo(lport); mutex_unlock(&lport->lp_mutex); + cancel_delayed_work_sync(&lport->retry_work); return 0; } EXPORT_SYMBOL(fc_fabric_logoff); @@ -918,6 +919,7 @@ static void fc_lport_recv_req(struct fc_lport *lport, struct fc_seq *sp, */ int fc_lport_reset(struct fc_lport *lport) { + cancel_delayed_work_sync(&lport->retry_work); mutex_lock(&lport->lp_mutex); fc_lport_enter_reset(lport); mutex_unlock(&lport->lp_mutex); -- cgit v1.2.3 From 5101ff99f59aefb72e0c96e82aa32048ac9f8425 Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 27 Feb 2009 10:55:18 -0800 Subject: [SCSI] libfc: Don't violate transport template for rogue port creation Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_disc.c | 6 +++--- drivers/scsi/libfc/fc_lport.c | 4 ++-- drivers/scsi/libfc/fc_rport.c | 3 +++ 3 files changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c index dd1564c9e04..15e3f840c04 100644 --- a/drivers/scsi/libfc/fc_disc.c +++ b/drivers/scsi/libfc/fc_disc.c @@ -430,7 +430,7 @@ static int fc_disc_new_target(struct fc_disc *disc, dp.ids.port_name = ids->port_name; dp.ids.node_name = ids->node_name; dp.ids.roles = ids->roles; - rport = fc_rport_rogue_create(&dp); + rport = lport->tt.rport_create(&dp); } if (!rport) error = -ENOMEM; @@ -617,7 +617,7 @@ static int fc_disc_gpn_ft_parse(struct fc_disc *disc, void *buf, size_t len) if ((dp.ids.port_id != fc_host_port_id(lport->host)) && (dp.ids.port_name != lport->wwpn)) { - rport = fc_rport_rogue_create(&dp); + rport = lport->tt.rport_create(&dp); if (rport) { rdata = rport->dd_data; rdata->ops = &fc_disc_rport_ops; @@ -769,7 +769,7 @@ static void fc_disc_single(struct fc_disc *disc, struct fc_disc_port *dp) if (rport) fc_disc_del_target(disc, rport); - new_rport = fc_rport_rogue_create(dp); + new_rport = lport->tt.rport_create(dp); if (new_rport) { rdata = new_rport->dd_data; rdata->ops = &fc_disc_rport_ops; diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index e6ea4f11953..07335ae2947 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -232,7 +232,7 @@ static void fc_lport_ptp_setup(struct fc_lport *lport, lport->ptp_rp = NULL; } - lport->ptp_rp = fc_rport_rogue_create(&dp); + lport->ptp_rp = lport->tt.rport_create(&dp); lport->tt.rport_login(lport->ptp_rp); @@ -1282,7 +1282,7 @@ static void fc_lport_enter_dns(struct fc_lport *lport) fc_lport_state_enter(lport, LPORT_ST_DNS); - rport = fc_rport_rogue_create(&dp); + rport = lport->tt.rport_create(&dp); if (!rport) goto err; diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index 600a8fffa94..81b3ca18878 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -1271,6 +1271,9 @@ static void fc_rport_flush_queue(void) int fc_rport_init(struct fc_lport *lport) { + if (!lport->tt.rport_create) + lport->tt.rport_create = fc_rport_rogue_create; + if (!lport->tt.rport_login) lport->tt.rport_login = fc_rport_login; -- cgit v1.2.3 From 23f11f9076fcd6ee20c56e413b11f1b5658e3f82 Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 27 Feb 2009 10:55:23 -0800 Subject: [SCSI] libfc: correct RPORT_TO_PRIV usage We only need to use this macro when assigning a value to rport->dd_data. All other accesses should just use dd_data. Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_disc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c index 15e3f840c04..9f4e408bc7f 100644 --- a/drivers/scsi/libfc/fc_disc.c +++ b/drivers/scsi/libfc/fc_disc.c @@ -246,7 +246,7 @@ static void fc_disc_recv_rscn_req(struct fc_seq *sp, struct fc_frame *fp, list_del(&dp->peers); rport = lport->tt.rport_lookup(lport, dp->ids.port_id); if (rport) { - rdata = RPORT_TO_PRIV(rport); + rdata = rport->dd_data; list_del(&rdata->peers); lport->tt.rport_logoff(rport); } @@ -453,7 +453,7 @@ static int fc_disc_new_target(struct fc_disc *disc, static void fc_disc_del_target(struct fc_disc *disc, struct fc_rport *rport) { struct fc_lport *lport = disc->lport; - struct fc_rport_libfc_priv *rdata = RPORT_TO_PRIV(rport); + struct fc_rport_libfc_priv *rdata = rport->dd_data; list_del(&rdata->peers); lport->tt.rport_logoff(rport); } -- cgit v1.2.3 From d3b33327cab0c8e9cae2c12d908ca79433c0d1ac Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 27 Feb 2009 10:55:29 -0800 Subject: [SCSI] libfc: rename rp to rdata in fc_disc_new_target() Just rename the variable as per our naming convention. Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_disc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c index 9f4e408bc7f..cfbce893941 100644 --- a/drivers/scsi/libfc/fc_disc.c +++ b/drivers/scsi/libfc/fc_disc.c @@ -396,7 +396,7 @@ static int fc_disc_new_target(struct fc_disc *disc, struct fc_rport_identifiers *ids) { struct fc_lport *lport = disc->lport; - struct fc_rport_libfc_priv *rp; + struct fc_rport_libfc_priv *rdata; int error = 0; if (rport && ids->port_name) { @@ -436,9 +436,9 @@ static int fc_disc_new_target(struct fc_disc *disc, error = -ENOMEM; } if (rport) { - rp = rport->dd_data; - rp->ops = &fc_disc_rport_ops; - rp->rp_state = RPORT_ST_INIT; + rdata = rport->dd_data; + rdata->ops = &fc_disc_rport_ops; + rdata->rp_state = RPORT_ST_INIT; lport->tt.rport_login(rport); } } -- cgit v1.2.3 From efaf5c085dd2d31757b0ff7886970dfddd8d1808 Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 27 Feb 2009 10:55:34 -0800 Subject: [SCSI] libfc: check for err when recv and state is incorrect If we've just created an interface and the an rport is logging in we may have a request on the wire (say PRLI). If we destroy the interface, we'll go through each rport on the disc->rports list and set each rport's state to NONE. Then the lport will reset the EM. The EM reset will send a CLOSED event to the prli_resp() handler which will notice that the state != PRLI. In this case it frees the frame pointer, decrements the refcount and unlocks the rport. The problem is that there isn't a frame in this case. It's just a pointer with an embedded error code. The free causes an Oops. This patch moves the error checking to be before the state checking. Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_lport.c | 50 +++++++++++++++++++++---------------------- drivers/scsi/libfc/fc_rport.c | 30 +++++++++++++------------- 2 files changed, 40 insertions(+), 40 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index 07335ae2947..c00de2244c7 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -1031,17 +1031,17 @@ static void fc_lport_rft_id_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_LPORT("Received a RFT_ID response\n"); + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + if (lport->state != LPORT_ST_RFT_ID) { FC_DBG("Received a RFT_ID response, but in state %s\n", fc_lport_state(lport)); goto out; } - if (IS_ERR(fp)) { - fc_lport_error(lport, fp); - goto err; - } - fh = fc_frame_header_get(fp); ct = fc_frame_payload_get(fp, sizeof(*ct)); @@ -1083,17 +1083,17 @@ static void fc_lport_rpn_id_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_LPORT("Received a RPN_ID response\n"); + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + if (lport->state != LPORT_ST_RPN_ID) { FC_DBG("Received a RPN_ID response, but in state %s\n", fc_lport_state(lport)); goto out; } - if (IS_ERR(fp)) { - fc_lport_error(lport, fp); - goto err; - } - fh = fc_frame_header_get(fp); ct = fc_frame_payload_get(fp, sizeof(*ct)); if (fh && ct && fh->fh_type == FC_TYPE_CT && @@ -1133,17 +1133,17 @@ static void fc_lport_scr_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_LPORT("Received a SCR response\n"); + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + if (lport->state != LPORT_ST_SCR) { FC_DBG("Received a SCR response, but in state %s\n", fc_lport_state(lport)); goto out; } - if (IS_ERR(fp)) { - fc_lport_error(lport, fp); - goto err; - } - op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC) fc_lport_enter_ready(lport); @@ -1359,17 +1359,17 @@ static void fc_lport_logo_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_LPORT("Received a LOGO response\n"); + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + if (lport->state != LPORT_ST_LOGO) { FC_DBG("Received a LOGO response, but in state %s\n", fc_lport_state(lport)); goto out; } - if (IS_ERR(fp)) { - fc_lport_error(lport, fp); - goto err; - } - op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC) fc_lport_enter_reset(lport); @@ -1443,17 +1443,17 @@ static void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_LPORT("Received a FLOGI response\n"); + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + if (lport->state != LPORT_ST_FLOGI) { FC_DBG("Received a FLOGI response, but in state %s\n", fc_lport_state(lport)); goto out; } - if (IS_ERR(fp)) { - fc_lport_error(lport, fp); - goto err; - } - fh = fc_frame_header_get(fp); did = ntoh24(fh->fh_d_id); if (fc_frame_payload_op(fp) == ELS_LS_ACC && did != 0) { diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index 81b3ca18878..4f23a9bb15a 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -505,17 +505,17 @@ static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_RPORT("Received a PLOGI response from port (%6x)\n", rport->port_id); + if (IS_ERR(fp)) { + fc_rport_error_retry(rport, fp); + goto err; + } + if (rdata->rp_state != RPORT_ST_PLOGI) { FC_DBG("Received a PLOGI response, but in state %s\n", fc_rport_state(rport)); goto out; } - if (IS_ERR(fp)) { - fc_rport_error_retry(rport, fp); - goto err; - } - op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC && (plp = fc_frame_payload_get(fp, sizeof(*plp))) != NULL) { @@ -614,17 +614,17 @@ static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_RPORT("Received a PRLI response from port (%6x)\n", rport->port_id); + if (IS_ERR(fp)) { + fc_rport_error_retry(rport, fp); + goto err; + } + if (rdata->rp_state != RPORT_ST_PRLI) { FC_DBG("Received a PRLI response, but in state %s\n", fc_rport_state(rport)); goto out; } - if (IS_ERR(fp)) { - fc_rport_error_retry(rport, fp); - goto err; - } - op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC) { pp = fc_frame_payload_get(fp, sizeof(*pp)); @@ -764,17 +764,17 @@ static void fc_rport_rtv_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_RPORT("Received a RTV response from port (%6x)\n", rport->port_id); + if (IS_ERR(fp)) { + fc_rport_error(rport, fp); + goto err; + } + if (rdata->rp_state != RPORT_ST_RTV) { FC_DBG("Received a RTV response, but in state %s\n", fc_rport_state(rport)); goto out; } - if (IS_ERR(fp)) { - fc_rport_error(rport, fp); - goto err; - } - op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC) { struct fc_els_rtv_acc *rtv; -- cgit v1.2.3 From 34f42a070fc98f5dc07e9fa2338b7b8d1dc347eb Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 27 Feb 2009 10:55:45 -0800 Subject: [SCSI] libfc, fcoe: Fix kerneldoc comments 1) Added '()' for function names in kerneldoc comments 2) Changed comment bookends from '**/' to '*/'. The comment on the the mailing list was that '**/' "is consistently unconventional. Not wrong, just odd." The Documentation/kernel-doc-nano-HOWTO.txt states that kerneldoc comment blocks should end with '**/' but most (if not all) instance I found under drivers/scsi/ were only using the '*/' so I converted to that style. 3) Removed incorrect linebreaks in kerneldoc comments where found 4) Removed a few unnecessary blank comment lines in kerneldoc comment blocks Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fc_transport_fcoe.c | 77 ++++++++-------- drivers/scsi/fcoe/fcoe_sw.c | 42 ++++----- drivers/scsi/fcoe/libfcoe.c | 162 +++++++++++++++++----------------- drivers/scsi/libfc/fc_disc.c | 45 +++++----- drivers/scsi/libfc/fc_fcp.c | 46 +++++----- drivers/scsi/libfc/fc_lport.c | 77 ++++++++-------- drivers/scsi/libfc/fc_rport.c | 46 +++++----- 7 files changed, 245 insertions(+), 250 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/fcoe/fc_transport_fcoe.c b/drivers/scsi/fcoe/fc_transport_fcoe.c index bf7fe6fc082..0eea4c434c3 100644 --- a/drivers/scsi/fcoe/fc_transport_fcoe.c +++ b/drivers/scsi/fcoe/fc_transport_fcoe.c @@ -33,19 +33,19 @@ static LIST_HEAD(fcoe_transports); static DEFINE_MUTEX(fcoe_transports_lock); /** - * fcoe_transport_default - returns ptr to the default transport fcoe_sw - **/ + * fcoe_transport_default() - Returns ptr to the default transport fcoe_sw + */ struct fcoe_transport *fcoe_transport_default(void) { return &fcoe_sw_transport; } /** - * fcoe_transport_to_pcidev - get the pci dev from a netdev + * fcoe_transport_to_pcidev() - get the pci dev from a netdev * @netdev: the netdev that pci dev will be retrived from * * Returns: NULL or the corrsponding pci_dev - **/ + */ struct pci_dev *fcoe_transport_pcidev(const struct net_device *netdev) { if (!netdev->dev.parent) @@ -54,16 +54,14 @@ struct pci_dev *fcoe_transport_pcidev(const struct net_device *netdev) } /** - * fcoe_transport_device_lookup - find out netdev is managed by the - * transport - * assign a transport to a device + * fcoe_transport_device_lookup() - Lookup a transport * @netdev: the netdev the transport to be attached to * * This will look for existing offload driver, if not found, it falls back to * the default sw hba (fcoe_sw) as its fcoe transport. * * Returns: 0 for success - **/ + */ static struct fcoe_transport_internal *fcoe_transport_device_lookup( struct fcoe_transport *t, struct net_device *netdev) { @@ -81,14 +79,14 @@ static struct fcoe_transport_internal *fcoe_transport_device_lookup( return NULL; } /** - * fcoe_transport_device_add - assign a transport to a device + * fcoe_transport_device_add() - Assign a transport to a device * @netdev: the netdev the transport to be attached to * * This will look for existing offload driver, if not found, it falls back to * the default sw hba (fcoe_sw) as its fcoe transport. * * Returns: 0 for success - **/ + */ static int fcoe_transport_device_add(struct fcoe_transport *t, struct net_device *netdev) { @@ -123,14 +121,14 @@ static int fcoe_transport_device_add(struct fcoe_transport *t, } /** - * fcoe_transport_device_remove - remove a device from its transport + * fcoe_transport_device_remove() - Remove a device from its transport * @netdev: the netdev the transport to be attached to * - * this removes the device from the transport so the given transport will + * This removes the device from the transport so the given transport will * not manage this device any more * * Returns: 0 for success - **/ + */ static int fcoe_transport_device_remove(struct fcoe_transport *t, struct net_device *netdev) { @@ -155,13 +153,13 @@ static int fcoe_transport_device_remove(struct fcoe_transport *t, } /** - * fcoe_transport_device_remove_all - remove all from transport devlist + * fcoe_transport_device_remove_all() - Remove all from transport devlist * - * this removes the device from the transport so the given transport will + * This removes the device from the transport so the given transport will * not manage this device any more * * Returns: 0 for success - **/ + */ static void fcoe_transport_device_remove_all(struct fcoe_transport *t) { struct fcoe_transport_internal *ti, *tmp; @@ -175,16 +173,16 @@ static void fcoe_transport_device_remove_all(struct fcoe_transport *t) } /** - * fcoe_transport_match - use the bus device match function to match the hw - * @t: the fcoe transport - * @netdev: + * fcoe_transport_match() - Use the bus device match function to match the hw + * @t: The fcoe transport to check + * @netdev: The netdev to match against * - * This function is used to check if the givne transport wants to manage the + * This function is used to check if the given transport wants to manage the * input netdev. if the transports implements the match function, it will be * called, o.w. we just compare the pci vendor and device id. * * Returns: true for match up - **/ + */ static bool fcoe_transport_match(struct fcoe_transport *t, struct net_device *netdev) { @@ -210,15 +208,15 @@ static bool fcoe_transport_match(struct fcoe_transport *t, } /** - * fcoe_transport_lookup - check if the transport is already registered + * fcoe_transport_lookup() - Check if the transport is already registered * @t: the transport to be looked up * * This compares the parent device (pci) vendor and device id * * Returns: NULL if not found * - * TODO - return default sw transport if no other transport is found - **/ + * TODO: return default sw transport if no other transport is found + */ static struct fcoe_transport *fcoe_transport_lookup( struct net_device *netdev) { @@ -239,11 +237,11 @@ static struct fcoe_transport *fcoe_transport_lookup( } /** - * fcoe_transport_register - adds a fcoe transport to the fcoe transports list + * fcoe_transport_register() - Adds a fcoe transport to the fcoe transports list * @t: ptr to the fcoe transport to be added * * Returns: 0 for success - **/ + */ int fcoe_transport_register(struct fcoe_transport *t) { struct fcoe_transport *tt; @@ -269,11 +267,11 @@ int fcoe_transport_register(struct fcoe_transport *t) EXPORT_SYMBOL_GPL(fcoe_transport_register); /** - * fcoe_transport_unregister - remove the tranport fro the fcoe transports list + * fcoe_transport_unregister() - Remove the tranport fro the fcoe transports list * @t: ptr to the fcoe transport to be removed * * Returns: 0 for success - **/ + */ int fcoe_transport_unregister(struct fcoe_transport *t) { struct fcoe_transport *tt, *tmp; @@ -294,8 +292,8 @@ int fcoe_transport_unregister(struct fcoe_transport *t) } EXPORT_SYMBOL_GPL(fcoe_transport_unregister); -/* - * fcoe_load_transport_driver - load an offload driver by alias name +/** + * fcoe_load_transport_driver() - Load an offload driver by alias name * @netdev: the target net device * * Requests for an offload driver module as the fcoe transport, if fails, it @@ -307,7 +305,7 @@ EXPORT_SYMBOL_GPL(fcoe_transport_unregister); * 3. pure hw fcoe hba may not have netdev * * Returns: 0 for success - **/ + */ int fcoe_load_transport_driver(struct net_device *netdev) { struct pci_dev *pci; @@ -335,14 +333,14 @@ int fcoe_load_transport_driver(struct net_device *netdev) EXPORT_SYMBOL_GPL(fcoe_load_transport_driver); /** - * fcoe_transport_attach - load transport to fcoe + * fcoe_transport_attach() - Load transport to fcoe * @netdev: the netdev the transport to be attached to * * This will look for existing offload driver, if not found, it falls back to * the default sw hba (fcoe_sw) as its fcoe transport. * * Returns: 0 for success - **/ + */ int fcoe_transport_attach(struct net_device *netdev) { struct fcoe_transport *t; @@ -373,11 +371,11 @@ int fcoe_transport_attach(struct net_device *netdev) EXPORT_SYMBOL_GPL(fcoe_transport_attach); /** - * fcoe_transport_release - unload transport from fcoe + * fcoe_transport_release() - Unload transport from fcoe * @netdev: the net device on which fcoe is to be released * * Returns: 0 for success - **/ + */ int fcoe_transport_release(struct net_device *netdev) { struct fcoe_transport *t; @@ -410,12 +408,12 @@ int fcoe_transport_release(struct net_device *netdev) EXPORT_SYMBOL_GPL(fcoe_transport_release); /** - * fcoe_transport_init - initializes fcoe transport layer + * fcoe_transport_init() - Initializes fcoe transport layer * * This prepares for the fcoe transport layer * * Returns: none - **/ + */ int __init fcoe_transport_init(void) { INIT_LIST_HEAD(&fcoe_transports); @@ -424,12 +422,13 @@ int __init fcoe_transport_init(void) } /** - * fcoe_transport_exit - cleans up the fcoe transport layer + * fcoe_transport_exit() - Cleans up the fcoe transport layer + * * This cleans up the fcoe transport layer. removing any transport on the list, * note that the transport destroy func is not called here. * * Returns: none - **/ + */ int __exit fcoe_transport_exit(void) { struct fcoe_transport *t, *tmp; diff --git a/drivers/scsi/fcoe/fcoe_sw.c b/drivers/scsi/fcoe/fcoe_sw.c index cf83675a0fb..007d1fbae80 100644 --- a/drivers/scsi/fcoe/fcoe_sw.c +++ b/drivers/scsi/fcoe/fcoe_sw.c @@ -104,13 +104,12 @@ static struct scsi_host_template fcoe_sw_shost_template = { .max_sectors = 0xffff, }; -/* - * fcoe_sw_lport_config - sets up the fc_lport +/** + * fcoe_sw_lport_config() - sets up the fc_lport * @lp: ptr to the fc_lport * @shost: ptr to the parent scsi host * * Returns: 0 for success - * */ static int fcoe_sw_lport_config(struct fc_lport *lp) { @@ -137,16 +136,14 @@ static int fcoe_sw_lport_config(struct fc_lport *lp) return 0; } -/* - * fcoe_sw_netdev_config - sets up fcoe_softc for lport and network - * related properties +/** + * fcoe_sw_netdev_config() - Set up netdev for SW FCoE * @lp : ptr to the fc_lport * @netdev : ptr to the associated netdevice struct * * Must be called after fcoe_sw_lport_config() as it will use lport mutex * * Returns : 0 for success - * */ static int fcoe_sw_netdev_config(struct fc_lport *lp, struct net_device *netdev) { @@ -224,16 +221,15 @@ static int fcoe_sw_netdev_config(struct fc_lport *lp, struct net_device *netdev) return 0; } -/* - * fcoe_sw_shost_config - sets up fc_lport->host +/** + * fcoe_sw_shost_config() - Sets up fc_lport->host * @lp : ptr to the fc_lport * @shost : ptr to the associated scsi host * @dev : device associated to scsi host * - * Must be called after fcoe_sw_lport_config) and fcoe_sw_netdev_config() + * Must be called after fcoe_sw_lport_config() and fcoe_sw_netdev_config() * * Returns : 0 for success - * */ static int fcoe_sw_shost_config(struct fc_lport *lp, struct Scsi_Host *shost, struct device *dev) @@ -261,8 +257,8 @@ static int fcoe_sw_shost_config(struct fc_lport *lp, struct Scsi_Host *shost, return 0; } -/* - * fcoe_sw_em_config - allocates em for this lport +/** + * fcoe_sw_em_config() - allocates em for this lport * @lp: the port that em is to allocated for * * Returns : 0 on success @@ -279,8 +275,8 @@ static inline int fcoe_sw_em_config(struct fc_lport *lp) return 0; } -/* - * fcoe_sw_destroy - FCoE software HBA tear-down function +/** + * fcoe_sw_destroy() - FCoE software HBA tear-down function * @netdev: ptr to the associated net_device * * Returns: 0 if link is OK for use by FCoE. @@ -353,8 +349,8 @@ static struct libfc_function_template fcoe_sw_libfc_fcn_templ = { .frame_send = fcoe_xmit, }; -/* - * fcoe_sw_create - this function creates the fcoe interface +/** + * fcoe_sw_create() - this function creates the fcoe interface * @netdev: pointer the associated netdevice * * Creates fc_lport struct and scsi_host for lport, configures lport @@ -440,8 +436,8 @@ out_host_put: return rc; } -/* - * fcoe_sw_match - the fcoe sw transport match function +/** + * fcoe_sw_match() - The FCoE SW transport match function * * Returns : false always */ @@ -461,8 +457,8 @@ struct fcoe_transport fcoe_sw_transport = { .device = 0xffff, }; -/* - * fcoe_sw_init - registers fcoe_sw_transport +/** + * fcoe_sw_init() - Registers fcoe_sw_transport * * Returns : 0 on success */ @@ -480,8 +476,8 @@ int __init fcoe_sw_init(void) return 0; } -/* - * fcoe_sw_exit - unregisters fcoe_sw_transport +/** + * fcoe_sw_exit() - Unregisters fcoe_sw_transport * * Returns : 0 on success */ diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index 296071043f5..5e68652985b 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -91,13 +91,13 @@ static struct notifier_block fcoe_cpu_notifier = { }; /** - * fcoe_create_percpu_data - creates the associated cpu data + * fcoe_create_percpu_data() - creates the associated cpu data * @cpu: index for the cpu where fcoe cpu data will be created * * create percpu stats block, from cpu add notifier * * Returns: none - **/ + */ static void fcoe_create_percpu_data(int cpu) { struct fc_lport *lp; @@ -115,13 +115,13 @@ static void fcoe_create_percpu_data(int cpu) } /** - * fcoe_destroy_percpu_data - destroys the associated cpu data + * fcoe_destroy_percpu_data() - destroys the associated cpu data * @cpu: index for the cpu where fcoe cpu data will destroyed * * destroy percpu stats block called by cpu add/remove notifier * * Retuns: none - **/ + */ static void fcoe_destroy_percpu_data(int cpu) { struct fc_lport *lp; @@ -137,7 +137,7 @@ static void fcoe_destroy_percpu_data(int cpu) } /** - * fcoe_cpu_callback - fcoe cpu hotplug event callback + * fcoe_cpu_callback() - fcoe cpu hotplug event callback * @nfb: callback data block * @action: event triggering the callback * @hcpu: index for the cpu of this event @@ -145,7 +145,7 @@ static void fcoe_destroy_percpu_data(int cpu) * this creates or destroys per cpu data for fcoe * * Returns NOTIFY_OK always. - **/ + */ static int fcoe_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { @@ -166,7 +166,7 @@ static int fcoe_cpu_callback(struct notifier_block *nfb, unsigned long action, #endif /* CONFIG_HOTPLUG_CPU */ /** - * fcoe_rcv - this is the fcoe receive function called by NET_RX_SOFTIRQ + * fcoe_rcv() - this is the fcoe receive function called by NET_RX_SOFTIRQ * @skb: the receive skb * @dev: associated net device * @ptype: context @@ -175,7 +175,7 @@ static int fcoe_cpu_callback(struct notifier_block *nfb, unsigned long action, * this function will receive the packet and build fc frame and pass it up * * Returns: 0 for success - **/ + */ int fcoe_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *ptype, struct net_device *olddev) { @@ -265,11 +265,11 @@ err2: EXPORT_SYMBOL_GPL(fcoe_rcv); /** - * fcoe_start_io - pass to netdev to start xmit for fcoe + * fcoe_start_io() - pass to netdev to start xmit for fcoe * @skb: the skb to be xmitted * * Returns: 0 for success - **/ + */ static inline int fcoe_start_io(struct sk_buff *skb) { int rc; @@ -283,12 +283,12 @@ static inline int fcoe_start_io(struct sk_buff *skb) } /** - * fcoe_get_paged_crc_eof - in case we need alloc a page for crc_eof + * fcoe_get_paged_crc_eof() - in case we need alloc a page for crc_eof * @skb: the skb to be xmitted * @tlen: total len * * Returns: 0 for success - **/ + */ static int fcoe_get_paged_crc_eof(struct sk_buff *skb, int tlen) { struct fcoe_percpu_s *fps; @@ -326,13 +326,12 @@ static int fcoe_get_paged_crc_eof(struct sk_buff *skb, int tlen) } /** - * fcoe_fc_crc - calculates FC CRC in this fcoe skb + * fcoe_fc_crc() - calculates FC CRC in this fcoe skb * @fp: the fc_frame containg data to be checksummed * * This uses crc32() to calculate the crc for fc frame * Return : 32 bit crc - * - **/ + */ u32 fcoe_fc_crc(struct fc_frame *fp) { struct sk_buff *skb = fp_skb(fp); @@ -363,13 +362,12 @@ u32 fcoe_fc_crc(struct fc_frame *fp) EXPORT_SYMBOL_GPL(fcoe_fc_crc); /** - * fcoe_xmit - FCoE frame transmit function + * fcoe_xmit() - FCoE frame transmit function * @lp: the associated local port * @fp: the fc_frame to be transmitted * * Return : 0 for success - * - **/ + */ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp) { int wlen, rc = 0; @@ -511,12 +509,11 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp) } EXPORT_SYMBOL_GPL(fcoe_xmit); -/* - * fcoe_percpu_receive_thread - recv thread per cpu +/** + * fcoe_percpu_receive_thread() - recv thread per cpu * @arg: ptr to the fcoe per cpu struct * * Return: 0 for success - * */ int fcoe_percpu_receive_thread(void *arg) { @@ -658,7 +655,7 @@ int fcoe_percpu_receive_thread(void *arg) } /** - * fcoe_recv_flogi - flogi receive function + * fcoe_recv_flogi() - flogi receive function * @fc: associated fcoe_softc * @fp: the recieved frame * @sa: the source address of this flogi @@ -667,7 +664,7 @@ int fcoe_percpu_receive_thread(void *arg) * mac address for the initiator, eitehr OUI based or GW based. * * Returns: none - **/ + */ static void fcoe_recv_flogi(struct fcoe_softc *fc, struct fc_frame *fp, u8 *sa) { struct fc_frame_header *fh; @@ -715,7 +712,7 @@ static void fcoe_recv_flogi(struct fcoe_softc *fc, struct fc_frame *fp, u8 *sa) } /** - * fcoe_watchdog - fcoe timer callback + * fcoe_watchdog() - fcoe timer callback * @vp: * * This checks the pending queue length for fcoe and set lport qfull @@ -723,7 +720,7 @@ static void fcoe_recv_flogi(struct fcoe_softc *fc, struct fc_frame *fp, u8 *sa) * fcoe_hostlist. * * Returns: 0 for success - **/ + */ void fcoe_watchdog(ulong vp) { struct fc_lport *lp; @@ -750,7 +747,7 @@ void fcoe_watchdog(ulong vp) /** - * fcoe_check_wait_queue - put the skb into fcoe pending xmit queue + * fcoe_check_wait_queue() - put the skb into fcoe pending xmit queue * @lp: the fc_port for this skb * @skb: the associated skb to be xmitted * @@ -764,7 +761,7 @@ void fcoe_watchdog(ulong vp) * by the next skb transmit. * * Returns: 0 for success - **/ + */ static int fcoe_check_wait_queue(struct fc_lport *lp) { int rc; @@ -797,12 +794,12 @@ static int fcoe_check_wait_queue(struct fc_lport *lp) } /** - * fcoe_insert_wait_queue_head - puts skb to fcoe pending queue head + * fcoe_insert_wait_queue_head() - puts skb to fcoe pending queue head * @lp: the fc_port for this skb * @skb: the associated skb to be xmitted * * Returns: none - **/ + */ static void fcoe_insert_wait_queue_head(struct fc_lport *lp, struct sk_buff *skb) { @@ -815,12 +812,12 @@ static void fcoe_insert_wait_queue_head(struct fc_lport *lp, } /** - * fcoe_insert_wait_queue - put the skb into fcoe pending queue tail + * fcoe_insert_wait_queue() - put the skb into fcoe pending queue tail * @lp: the fc_port for this skb * @skb: the associated skb to be xmitted * * Returns: none - **/ + */ static void fcoe_insert_wait_queue(struct fc_lport *lp, struct sk_buff *skb) { @@ -833,10 +830,9 @@ static void fcoe_insert_wait_queue(struct fc_lport *lp, } /** - * fcoe_dev_setup - setup link change notification interface - * - **/ -static void fcoe_dev_setup(void) + * fcoe_dev_setup() - setup link change notification interface + */ +static void fcoe_dev_setup() { /* * here setup a interface specific wd time to @@ -846,15 +842,15 @@ static void fcoe_dev_setup(void) } /** - * fcoe_dev_setup - cleanup link change notification interface - **/ + * fcoe_dev_setup() - cleanup link change notification interface + */ static void fcoe_dev_cleanup(void) { unregister_netdevice_notifier(&fcoe_notifier); } /** - * fcoe_device_notification - netdev event notification callback + * fcoe_device_notification() - netdev event notification callback * @notifier: context of the notification * @event: type of event * @ptr: fixed array for output parsed ifname @@ -862,7 +858,7 @@ static void fcoe_dev_cleanup(void) * This function is called by the ethernet driver in case of link change event * * Returns: 0 for success - **/ + */ static int fcoe_device_notification(struct notifier_block *notifier, ulong event, void *ptr) { @@ -926,12 +922,12 @@ out: } /** - * fcoe_if_to_netdev - parse a name buffer to get netdev + * fcoe_if_to_netdev() - parse a name buffer to get netdev * @ifname: fixed array for output parsed ifname * @buffer: incoming buffer to be copied * * Returns: NULL or ptr to netdeive - **/ + */ static struct net_device *fcoe_if_to_netdev(const char *buffer) { char *cp; @@ -948,11 +944,11 @@ static struct net_device *fcoe_if_to_netdev(const char *buffer) } /** - * fcoe_netdev_to_module_owner - finds out the nic drive moddule of the netdev + * fcoe_netdev_to_module_owner() - finds out the nic drive moddule of the netdev * @netdev: the target netdev * * Returns: ptr to the struct module, NULL for failure - **/ + */ static struct module *fcoe_netdev_to_module_owner( const struct net_device *netdev) { @@ -972,12 +968,14 @@ static struct module *fcoe_netdev_to_module_owner( } /** - * fcoe_ethdrv_get - holds the nic driver module by try_module_get() for - * the corresponding netdev. + * fcoe_ethdrv_get() - Hold the Ethernet driver * @netdev: the target netdev * + * Holds the Ethernet driver module by try_module_get() for + * the corresponding netdev. + * * Returns: 0 for succsss - **/ + */ static int fcoe_ethdrv_get(const struct net_device *netdev) { struct module *owner; @@ -992,12 +990,14 @@ static int fcoe_ethdrv_get(const struct net_device *netdev) } /** - * fcoe_ethdrv_get - releases the nic driver module by module_put for - * the corresponding netdev. + * fcoe_ethdrv_put() - Release the Ethernet driver * @netdev: the target netdev * + * Releases the Ethernet driver module by module_put for + * the corresponding netdev. + * * Returns: 0 for succsss - **/ + */ static int fcoe_ethdrv_put(const struct net_device *netdev) { struct module *owner; @@ -1013,12 +1013,12 @@ static int fcoe_ethdrv_put(const struct net_device *netdev) } /** - * fcoe_destroy- handles the destroy from sysfs + * fcoe_destroy() - handles the destroy from sysfs * @buffer: expcted to be a eth if name * @kp: associated kernel param * * Returns: 0 for success - **/ + */ static int fcoe_destroy(const char *buffer, struct kernel_param *kp) { int rc; @@ -1051,12 +1051,12 @@ out_nodev: } /** - * fcoe_create - handles the create call from sysfs + * fcoe_create() - Handles the create call from sysfs * @buffer: expcted to be a eth if name * @kp: associated kernel param * * Returns: 0 for success - **/ + */ static int fcoe_create(const char *buffer, struct kernel_param *kp) { int rc; @@ -1097,8 +1097,8 @@ module_param_call(destroy, fcoe_destroy, NULL, NULL, S_IWUSR); __MODULE_PARM_TYPE(destroy, "string"); MODULE_PARM_DESC(destroy, "Destroy fcoe port"); -/* - * fcoe_link_ok - check if link is ok for the fc_lport +/** + * fcoe_link_ok() - Check if link is ok for the fc_lport * @lp: ptr to the fc_lport * * Any permanently-disqualifying conditions have been previously checked. @@ -1142,9 +1142,8 @@ int fcoe_link_ok(struct fc_lport *lp) } EXPORT_SYMBOL_GPL(fcoe_link_ok); -/* - * fcoe_percpu_clean - frees skb of the corresponding lport from the per - * cpu queue. +/** + * fcoe_percpu_clean() - Clear the pending skbs for an lport * @lp: the fc_lport */ void fcoe_percpu_clean(struct fc_lport *lp) @@ -1178,11 +1177,11 @@ void fcoe_percpu_clean(struct fc_lport *lp) EXPORT_SYMBOL_GPL(fcoe_percpu_clean); /** - * fcoe_clean_pending_queue - dequeue skb and free it + * fcoe_clean_pending_queue() - Dequeue a skb and free it * @lp: the corresponding fc_lport * * Returns: none - **/ + */ void fcoe_clean_pending_queue(struct fc_lport *lp) { struct fcoe_softc *fc = lport_priv(lp); @@ -1199,12 +1198,12 @@ void fcoe_clean_pending_queue(struct fc_lport *lp) EXPORT_SYMBOL_GPL(fcoe_clean_pending_queue); /** - * libfc_host_alloc - allocate a Scsi_Host with room for the fc_lport + * libfc_host_alloc() - Allocate a Scsi_Host with room for the fc_lport * @sht: ptr to the scsi host templ * @priv_size: size of private data after fc_lport * * Returns: ptr to Scsi_Host - * TODO - to libfc? + * TODO: to libfc? */ static inline struct Scsi_Host *libfc_host_alloc( struct scsi_host_template *sht, int priv_size) @@ -1213,7 +1212,7 @@ static inline struct Scsi_Host *libfc_host_alloc( } /** - * fcoe_host_alloc - allocate a Scsi_Host with room for the fcoe_softc + * fcoe_host_alloc() - Allocate a Scsi_Host with room for the fcoe_softc * @sht: ptr to the scsi host templ * @priv_size: size of private data after fc_lport * @@ -1225,8 +1224,8 @@ struct Scsi_Host *fcoe_host_alloc(struct scsi_host_template *sht, int priv_size) } EXPORT_SYMBOL_GPL(fcoe_host_alloc); -/* - * fcoe_reset - resets the fcoe +/** + * fcoe_reset() - Resets the fcoe * @shost: shost the reset is from * * Returns: always 0 @@ -1239,8 +1238,8 @@ int fcoe_reset(struct Scsi_Host *shost) } EXPORT_SYMBOL_GPL(fcoe_reset); -/* - * fcoe_wwn_from_mac - converts 48-bit IEEE MAC address to 64-bit FC WWN. +/** + * fcoe_wwn_from_mac() - Converts 48-bit IEEE MAC address to 64-bit FC WWN. * @mac: mac address * @scheme: check port * @port: port indicator for converting @@ -1279,8 +1278,9 @@ u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], return wwn; } EXPORT_SYMBOL_GPL(fcoe_wwn_from_mac); -/* - * fcoe_hostlist_lookup_softc - find the corresponding lport by a given device + +/** + * fcoe_hostlist_lookup_softc() - find the corresponding lport by a given device * @device: this is currently ptr to net_device * * Returns: NULL or the located fcoe_softc @@ -1301,8 +1301,8 @@ static struct fcoe_softc *fcoe_hostlist_lookup_softc( return NULL; } -/* - * fcoe_hostlist_lookup - find the corresponding lport by netdev +/** + * fcoe_hostlist_lookup() - Find the corresponding lport by netdev * @netdev: ptr to net_device * * Returns: 0 for success @@ -1317,8 +1317,8 @@ struct fc_lport *fcoe_hostlist_lookup(const struct net_device *netdev) } EXPORT_SYMBOL_GPL(fcoe_hostlist_lookup); -/* - * fcoe_hostlist_add - add a lport to lports list +/** + * fcoe_hostlist_add() - Add a lport to lports list * @lp: ptr to the fc_lport to badded * * Returns: 0 for success @@ -1338,8 +1338,8 @@ int fcoe_hostlist_add(const struct fc_lport *lp) } EXPORT_SYMBOL_GPL(fcoe_hostlist_add); -/* - * fcoe_hostlist_remove - remove a lport from lports list +/** + * fcoe_hostlist_remove() - remove a lport from lports list * @lp: ptr to the fc_lport to badded * * Returns: 0 for success @@ -1359,12 +1359,12 @@ int fcoe_hostlist_remove(const struct fc_lport *lp) EXPORT_SYMBOL_GPL(fcoe_hostlist_remove); /** - * fcoe_libfc_config - sets up libfc related properties for lport + * fcoe_libfc_config() - sets up libfc related properties for lport * @lp: ptr to the fc_lport * @tt: libfc function template * * Returns : 0 for success - **/ + */ int fcoe_libfc_config(struct fc_lport *lp, struct libfc_function_template *tt) { /* Set the function pointers set by the LLDD */ @@ -1382,14 +1382,14 @@ int fcoe_libfc_config(struct fc_lport *lp, struct libfc_function_template *tt) EXPORT_SYMBOL_GPL(fcoe_libfc_config); /** - * fcoe_init - fcoe module loading initialization + * fcoe_init() - fcoe module loading initialization * * Initialization routine * 1. Will create fc transport software structure * 2. initialize the link list of port information structure * * Returns 0 on success, negative on failure - **/ + */ static int __init fcoe_init(void) { int cpu; @@ -1452,10 +1452,10 @@ static int __init fcoe_init(void) module_init(fcoe_init); /** - * fcoe_exit - fcoe module unloading cleanup + * fcoe_exit() - fcoe module unloading cleanup * * Returns 0 on success, negative on failure - **/ + */ static void __exit fcoe_exit(void) { u32 idx; diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c index cfbce893941..e57556ea5b4 100644 --- a/drivers/scsi/libfc/fc_disc.c +++ b/drivers/scsi/libfc/fc_disc.c @@ -64,7 +64,7 @@ static void fc_disc_single(struct fc_disc *, struct fc_disc_port *); static void fc_disc_restart(struct fc_disc *); /** - * fc_disc_lookup_rport - lookup a remote port by port_id + * fc_disc_lookup_rport() - lookup a remote port by port_id * @lport: Fibre Channel host port instance * @port_id: remote port port_id to match */ @@ -92,7 +92,7 @@ struct fc_rport *fc_disc_lookup_rport(const struct fc_lport *lport, } /** - * fc_disc_stop_rports - delete all the remote ports associated with the lport + * fc_disc_stop_rports() - delete all the remote ports associated with the lport * @disc: The discovery job to stop rports on * * Locking Note: This function expects that the lport mutex is locked before @@ -117,7 +117,7 @@ void fc_disc_stop_rports(struct fc_disc *disc) } /** - * fc_disc_rport_callback - Event handler for rport events + * fc_disc_rport_callback() - Event handler for rport events * @lport: The lport which is receiving the event * @rport: The rport which the event has occured on * @event: The event that occured @@ -151,7 +151,7 @@ static void fc_disc_rport_callback(struct fc_lport *lport, } /** - * fc_disc_recv_rscn_req - Handle Registered State Change Notification (RSCN) + * fc_disc_recv_rscn_req() - Handle Registered State Change Notification (RSCN) * @sp: Current sequence of the RSCN exchange * @fp: RSCN Frame * @lport: Fibre Channel host port instance @@ -265,7 +265,7 @@ reject: } /** - * fc_disc_recv_req - Handle incoming requests + * fc_disc_recv_req() - Handle incoming requests * @sp: Current sequence of the request exchange * @fp: The frame * @lport: The FC local port @@ -294,7 +294,7 @@ static void fc_disc_recv_req(struct fc_seq *sp, struct fc_frame *fp, } /** - * fc_disc_restart - Restart discovery + * fc_disc_restart() - Restart discovery * @lport: FC discovery context * * Locking Note: This function expects that the disc mutex @@ -322,7 +322,7 @@ static void fc_disc_restart(struct fc_disc *disc) } /** - * fc_disc_start - Fibre Channel Target discovery + * fc_disc_start() - Fibre Channel Target discovery * @lport: FC local port * * Returns non-zero if discovery cannot be started. @@ -383,7 +383,7 @@ static struct fc_rport_operations fc_disc_rport_ops = { }; /** - * fc_disc_new_target - Handle new target found by discovery + * fc_disc_new_target() - Handle new target found by discovery * @lport: FC local port * @rport: The previous FC remote port (NULL if new remote port) * @ids: Identifiers for the new FC remote port @@ -446,7 +446,7 @@ static int fc_disc_new_target(struct fc_disc *disc, } /** - * fc_disc_del_target - Delete a target + * fc_disc_del_target() - Delete a target * @disc: FC discovery context * @rport: The remote port to be removed */ @@ -459,7 +459,7 @@ static void fc_disc_del_target(struct fc_disc *disc, struct fc_rport *rport) } /** - * fc_disc_done - Discovery has been completed + * fc_disc_done() - Discovery has been completed * @disc: FC discovery context */ static void fc_disc_done(struct fc_disc *disc) @@ -479,7 +479,7 @@ static void fc_disc_done(struct fc_disc *disc) } /** - * fc_disc_error - Handle error on dNS request + * fc_disc_error() - Handle error on dNS request * @disc: FC discovery context * @fp: The frame pointer */ @@ -519,7 +519,7 @@ static void fc_disc_error(struct fc_disc *disc, struct fc_frame *fp) } /** - * fc_disc_gpn_ft_req - Send Get Port Names by FC-4 type (GPN_FT) request + * fc_disc_gpn_ft_req() - Send Get Port Names by FC-4 type (GPN_FT) request * @lport: FC discovery context * * Locking Note: This function expects that the disc_mutex is locked @@ -553,7 +553,7 @@ err: } /** - * fc_disc_gpn_ft_parse - Parse the list of IDs and names resulting from a request + * fc_disc_gpn_ft_parse() - Parse the list of IDs and names resulting from a request * @lport: Fibre Channel host port instance * @buf: GPN_FT response buffer * @len: size of response buffer @@ -658,7 +658,10 @@ static int fc_disc_gpn_ft_parse(struct fc_disc *disc, void *buf, size_t len) return error; } -/* +/** + * fc_disc_timeout() - Retry handler for the disc component + * @work: Structure holding disc obj that needs retry discovery + * * Handle retry of memory allocation for remote ports. */ static void fc_disc_timeout(struct work_struct *work) @@ -673,7 +676,7 @@ static void fc_disc_timeout(struct work_struct *work) } /** - * fc_disc_gpn_ft_resp - Handle a response frame from Get Port Names (GPN_FT) + * fc_disc_gpn_ft_resp() - Handle a response frame from Get Port Names (GPN_FT) * @sp: Current sequence of GPN_FT exchange * @fp: response frame * @lp_arg: Fibre Channel host port instance @@ -712,9 +715,7 @@ static void fc_disc_gpn_ft_resp(struct fc_seq *sp, struct fc_frame *fp, fr_len(fp)); } else if (ntohs(cp->ct_cmd) == FC_FS_ACC) { - /* - * Accepted. Parse response. - */ + /* Accepted, parse the response. */ buf = cp + 1; len -= sizeof(*cp); } else if (ntohs(cp->ct_cmd) == FC_FS_RJT) { @@ -746,7 +747,7 @@ static void fc_disc_gpn_ft_resp(struct fc_seq *sp, struct fc_frame *fp, } /** - * fc_disc_single - Discover the directory information for a single target + * fc_disc_single() - Discover the directory information for a single target * @lport: FC local port * @dp: The port to rediscover * @@ -782,7 +783,7 @@ out: } /** - * fc_disc_stop - Stop discovery for a given lport + * fc_disc_stop() - Stop discovery for a given lport * @lport: The lport that discovery should stop for */ void fc_disc_stop(struct fc_lport *lport) @@ -796,7 +797,7 @@ void fc_disc_stop(struct fc_lport *lport) } /** - * fc_disc_stop_final - Stop discovery for a given lport + * fc_disc_stop_final() - Stop discovery for a given lport * @lport: The lport that discovery should stop for * * This function will block until discovery has been @@ -809,7 +810,7 @@ void fc_disc_stop_final(struct fc_lport *lport) } /** - * fc_disc_init - Initialize the discovery block + * fc_disc_init() - Initialize the discovery block * @lport: FC local port */ int fc_disc_init(struct fc_lport *lport) diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index ecc72612c38..2a631d7dbce 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -161,7 +161,7 @@ static struct fc_fcp_pkt *fc_fcp_pkt_alloc(struct fc_lport *lp, gfp_t gfp) } /** - * fc_fcp_pkt_release - release hold on scsi_pkt packet + * fc_fcp_pkt_release() - release hold on scsi_pkt packet * @fsp: fcp packet struct * * This is used by upper layer scsi driver. @@ -183,8 +183,7 @@ static void fc_fcp_pkt_hold(struct fc_fcp_pkt *fsp) } /** - * fc_fcp_pkt_destory - release hold on scsi_pkt packet - * + * fc_fcp_pkt_destory() - release hold on scsi_pkt packet * @seq: exchange sequence * @fsp: fcp packet struct * @@ -199,7 +198,7 @@ static void fc_fcp_pkt_destroy(struct fc_seq *seq, void *fsp) } /** - * fc_fcp_lock_pkt - lock a packet and get a ref to it. + * fc_fcp_lock_pkt() - lock a packet and get a ref to it. * @fsp: fcp packet * * We should only return error if we return a command to scsi-ml before @@ -291,9 +290,7 @@ static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp) buf = fc_frame_payload_get(fp, 0); if (offset + len > fsp->data_len) { - /* - * this should never happen - */ + /* this should never happen */ if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) && fc_frame_crc_check(fp)) goto crc_err; @@ -387,8 +384,8 @@ crc_err: fc_fcp_complete_locked(fsp); } -/* - * fc_fcp_send_data - Send SCSI data to target. +/** + * fc_fcp_send_data() - Send SCSI data to target. * @fsp: ptr to fc_fcp_pkt * @sp: ptr to this sequence * @offset: starting offset for this data request @@ -610,8 +607,8 @@ static void fc_fcp_abts_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp) } } -/* - * fc_fcp_reduce_can_queue - drop can_queue +/** + * fc_fcp_reduce_can_queue() - drop can_queue * @lp: lport to drop queueing for * * If we are getting memory allocation failures, then we may @@ -642,9 +639,11 @@ done: spin_unlock_irqrestore(lp->host->host_lock, flags); } -/* - * exch mgr calls this routine to process scsi - * exchanges. +/** + * fc_fcp_recv() - Reveive FCP frames + * @seq: The sequence the frame is on + * @fp: The FC frame + * @arg: The related FCP packet * * Return : None * Context : called from Soft IRQ context @@ -832,7 +831,7 @@ err: } /** - * fc_fcp_complete_locked - complete processing of a fcp packet + * fc_fcp_complete_locked() - complete processing of a fcp packet * @fsp: fcp packet * * This function may sleep if a timer is pending. The packet lock must be @@ -900,7 +899,7 @@ static void fc_fcp_cleanup_cmd(struct fc_fcp_pkt *fsp, int error) } /** - * fc_fcp_cleanup_each_cmd - run fn on each active command + * fc_fcp_cleanup_each_cmd() - Cleanup active commads * @lp: logical port * @id: target id * @lun: lun @@ -952,7 +951,7 @@ static void fc_fcp_abort_io(struct fc_lport *lp) } /** - * fc_fcp_pkt_send - send a fcp packet to the lower level. + * fc_fcp_pkt_send() - send a fcp packet to the lower level. * @lp: fc lport * @fsp: fc packet. * @@ -1727,7 +1726,7 @@ out: EXPORT_SYMBOL(fc_queuecommand); /** - * fc_io_compl - Handle responses for completed commands + * fc_io_compl() - Handle responses for completed commands * @fsp: scsi packet * * Translates a error to a Linux SCSI error. @@ -1857,7 +1856,7 @@ static void fc_io_compl(struct fc_fcp_pkt *fsp) } /** - * fc_fcp_complete - complete processing of a fcp packet + * fc_fcp_complete() - complete processing of a fcp packet * @fsp: fcp packet * * This function may sleep if a fsp timer is pending. @@ -1874,9 +1873,10 @@ void fc_fcp_complete(struct fc_fcp_pkt *fsp) EXPORT_SYMBOL(fc_fcp_complete); /** - * fc_eh_abort - Abort a command...from scsi host template + * fc_eh_abort() - Abort a command * @sc_cmd: scsi command to abort * + * From scsi host template. * send ABTS to the target device and wait for the response * sc_cmd is the pointer to the command to be aborted. */ @@ -1920,7 +1920,7 @@ release_pkt: EXPORT_SYMBOL(fc_eh_abort); /** - * fc_eh_device_reset: Reset a single LUN + * fc_eh_device_reset() Reset a single LUN * @sc_cmd: scsi command * * Set from scsi host template to send tm cmd to the target and wait for the @@ -1973,7 +1973,7 @@ out: EXPORT_SYMBOL(fc_eh_device_reset); /** - * fc_eh_host_reset - The reset function will reset the ports on the host. + * fc_eh_host_reset() - The reset function will reset the ports on the host. * @sc_cmd: scsi command */ int fc_eh_host_reset(struct scsi_cmnd *sc_cmd) @@ -1999,7 +1999,7 @@ int fc_eh_host_reset(struct scsi_cmnd *sc_cmd) EXPORT_SYMBOL(fc_eh_host_reset); /** - * fc_slave_alloc - configure queue depth + * fc_slave_alloc() - configure queue depth * @sdev: scsi device * * Configures queue depth based on host's cmd_per_len. If not set diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index c00de2244c7..2ae50a1188e 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -139,7 +139,7 @@ static int fc_frame_drop(struct fc_lport *lport, struct fc_frame *fp) } /** - * fc_lport_rport_callback - Event handler for rport events + * fc_lport_rport_callback() - Event handler for rport events * @lport: The lport which is receiving the event * @rport: The rport which the event has occured on * @event: The event that occured @@ -195,7 +195,7 @@ static void fc_lport_rport_callback(struct fc_lport *lport, } /** - * fc_lport_state - Return a string which represents the lport's state + * fc_lport_state() - Return a string which represents the lport's state * @lport: The lport whose state is to converted to a string */ static const char *fc_lport_state(struct fc_lport *lport) @@ -209,7 +209,7 @@ static const char *fc_lport_state(struct fc_lport *lport) } /** - * fc_lport_ptp_setup - Create an rport for point-to-point mode + * fc_lport_ptp_setup() - Create an rport for point-to-point mode * @lport: The lport to attach the ptp rport to * @fid: The FID of the ptp rport * @remote_wwpn: The WWPN of the ptp rport @@ -351,7 +351,7 @@ static void fc_lport_add_fc4_type(struct fc_lport *lport, enum fc_fh_type type) } /** - * fc_lport_recv_rlir_req - Handle received Registered Link Incident Report. + * fc_lport_recv_rlir_req() - Handle received Registered Link Incident Report. * @lport: Fibre Channel local port recieving the RLIR * @sp: current sequence in the RLIR exchange * @fp: RLIR request frame @@ -370,7 +370,7 @@ static void fc_lport_recv_rlir_req(struct fc_seq *sp, struct fc_frame *fp, } /** - * fc_lport_recv_echo_req - Handle received ECHO request + * fc_lport_recv_echo_req() - Handle received ECHO request * @lport: Fibre Channel local port recieving the ECHO * @sp: current sequence in the ECHO exchange * @fp: ECHO request frame @@ -412,7 +412,7 @@ static void fc_lport_recv_echo_req(struct fc_seq *sp, struct fc_frame *in_fp, } /** - * fc_lport_recv_echo_req - Handle received Request Node ID data request + * fc_lport_recv_echo_req() - Handle received Request Node ID data request * @lport: Fibre Channel local port recieving the RNID * @sp: current sequence in the RNID exchange * @fp: RNID request frame @@ -479,7 +479,7 @@ static void fc_lport_recv_rnid_req(struct fc_seq *sp, struct fc_frame *in_fp, } /** - * fc_lport_recv_adisc_req - Handle received Address Discovery Request + * fc_lport_recv_adisc_req() - Handle received Address Discovery Request * @lport: Fibre Channel local port recieving the ADISC * @sp: current sequence in the ADISC exchange * @fp: ADISC request frame @@ -529,7 +529,7 @@ static void fc_lport_recv_adisc_req(struct fc_seq *sp, struct fc_frame *in_fp, } /** - * fc_lport_recv_logo_req - Handle received fabric LOGO request + * fc_lport_recv_logo_req() - Handle received fabric LOGO request * @lport: Fibre Channel local port recieving the LOGO * @sp: current sequence in the LOGO exchange * @fp: LOGO request frame @@ -546,7 +546,7 @@ static void fc_lport_recv_logo_req(struct fc_seq *sp, struct fc_frame *fp, } /** - * fc_fabric_login - Start the lport state machine + * fc_fabric_login() - Start the lport state machine * @lport: The lport that should log into the fabric * * Locking Note: This function should not be called @@ -568,7 +568,7 @@ int fc_fabric_login(struct fc_lport *lport) EXPORT_SYMBOL(fc_fabric_login); /** - * fc_linkup - Handler for transport linkup events + * fc_linkup() - Handler for transport linkup events * @lport: The lport whose link is up */ void fc_linkup(struct fc_lport *lport) @@ -588,7 +588,7 @@ void fc_linkup(struct fc_lport *lport) EXPORT_SYMBOL(fc_linkup); /** - * fc_linkdown - Handler for transport linkdown events + * fc_linkdown() - Handler for transport linkdown events * @lport: The lport whose link is down */ void fc_linkdown(struct fc_lport *lport) @@ -607,12 +607,12 @@ void fc_linkdown(struct fc_lport *lport) EXPORT_SYMBOL(fc_linkdown); /** - * fc_fabric_logoff - Logout of the fabric + * fc_fabric_logoff() - Logout of the fabric * @lport: fc_lport pointer to logoff the fabric * * Return value: * 0 for success, -1 for failure - **/ + */ int fc_fabric_logoff(struct fc_lport *lport) { lport->tt.disc_stop_final(lport); @@ -625,7 +625,7 @@ int fc_fabric_logoff(struct fc_lport *lport) EXPORT_SYMBOL(fc_fabric_logoff); /** - * fc_lport_destroy - unregister a fc_lport + * fc_lport_destroy() - unregister a fc_lport * @lport: fc_lport pointer to unregister * * Return value: @@ -635,7 +635,7 @@ EXPORT_SYMBOL(fc_fabric_logoff); * clean-up all the allocated memory * and free up other system resources. * - **/ + */ int fc_lport_destroy(struct fc_lport *lport) { lport->tt.frame_send = fc_frame_drop; @@ -646,15 +646,14 @@ int fc_lport_destroy(struct fc_lport *lport) EXPORT_SYMBOL(fc_lport_destroy); /** - * fc_set_mfs - sets up the mfs for the corresponding fc_lport + * fc_set_mfs() - sets up the mfs for the corresponding fc_lport * @lport: fc_lport pointer to unregister * @mfs: the new mfs for fc_lport * * Set mfs for the given fc_lport to the new mfs. * * Return: 0 for success - * - **/ + */ int fc_set_mfs(struct fc_lport *lport, u32 mfs) { unsigned int old_mfs; @@ -683,7 +682,7 @@ int fc_set_mfs(struct fc_lport *lport, u32 mfs) EXPORT_SYMBOL(fc_set_mfs); /** - * fc_lport_disc_callback - Callback for discovery events + * fc_lport_disc_callback() - Callback for discovery events * @lport: FC local port * @event: The discovery event */ @@ -708,7 +707,7 @@ void fc_lport_disc_callback(struct fc_lport *lport, enum fc_disc_event event) } /** - * fc_rport_enter_ready - Enter the ready state and start discovery + * fc_rport_enter_ready() - Enter the ready state and start discovery * @lport: Fibre Channel local port that is ready * * Locking Note: The lport lock is expected to be held before calling @@ -725,7 +724,7 @@ static void fc_lport_enter_ready(struct fc_lport *lport) } /** - * fc_lport_recv_flogi_req - Receive a FLOGI request + * fc_lport_recv_flogi_req() - Receive a FLOGI request * @sp_in: The sequence the FLOGI is on * @rx_fp: The frame the FLOGI is in * @lport: The lport that recieved the request @@ -815,7 +814,7 @@ out: } /** - * fc_lport_recv_req - The generic lport request handler + * fc_lport_recv_req() - The generic lport request handler * @lport: The lport that received the request * @sp: The sequence the request is on * @fp: The frame the request is in @@ -911,7 +910,7 @@ static void fc_lport_recv_req(struct fc_lport *lport, struct fc_seq *sp, } /** - * fc_lport_reset - Reset an lport + * fc_lport_reset() - Reset an lport * @lport: The lport which should be reset * * Locking Note: This functions should not be called with the @@ -928,7 +927,7 @@ int fc_lport_reset(struct fc_lport *lport) EXPORT_SYMBOL(fc_lport_reset); /** - * fc_rport_enter_reset - Reset the local port + * fc_rport_enter_reset() - Reset the local port * @lport: Fibre Channel local port to be reset * * Locking Note: The lport lock is expected to be held before calling @@ -960,7 +959,7 @@ static void fc_lport_enter_reset(struct fc_lport *lport) } /** - * fc_lport_error - Handler for any errors + * fc_lport_error() - Handler for any errors * @lport: The fc_lport object * @fp: The frame pointer * @@ -1007,8 +1006,8 @@ static void fc_lport_error(struct fc_lport *lport, struct fc_frame *fp) } /** - * fc_lport_rft_id_resp - Handle response to Register Fibre - * Channel Types by ID (RPN_ID) request + * fc_lport_rft_id_resp() - Handle response to Register Fibre + * Channel Types by ID (RPN_ID) request * @sp: current sequence in RPN_ID exchange * @fp: response frame * @lp_arg: Fibre Channel host port instance @@ -1059,8 +1058,8 @@ err: } /** - * fc_lport_rpn_id_resp - Handle response to Register Port - * Name by ID (RPN_ID) request + * fc_lport_rpn_id_resp() - Handle response to Register Port + * Name by ID (RPN_ID) request * @sp: current sequence in RPN_ID exchange * @fp: response frame * @lp_arg: Fibre Channel host port instance @@ -1111,7 +1110,7 @@ err: } /** - * fc_lport_scr_resp - Handle response to State Change Register (SCR) request + * fc_lport_scr_resp() - Handle response to State Change Register (SCR) request * @sp: current sequence in SCR exchange * @fp: response frame * @lp_arg: Fibre Channel lport port instance that sent the registration request @@ -1157,7 +1156,7 @@ err: } /** - * fc_lport_enter_scr - Send a State Change Register (SCR) request + * fc_lport_enter_scr() - Send a State Change Register (SCR) request * @lport: Fibre Channel local port to register for state changes * * Locking Note: The lport lock is expected to be held before calling @@ -1184,7 +1183,7 @@ static void fc_lport_enter_scr(struct fc_lport *lport) } /** - * fc_lport_enter_rft_id - Register FC4-types with the name server + * fc_lport_enter_rft_id() - Register FC4-types with the name server * @lport: Fibre Channel local port to register * * Locking Note: The lport lock is expected to be held before calling @@ -1226,7 +1225,7 @@ static void fc_lport_enter_rft_id(struct fc_lport *lport) } /** - * fc_rport_enter_rft_id - Register port name with the name server + * fc_rport_enter_rft_id() - Register port name with the name server * @lport: Fibre Channel local port to register * * Locking Note: The lport lock is expected to be held before calling @@ -1259,7 +1258,7 @@ static struct fc_rport_operations fc_lport_rport_ops = { }; /** - * fc_rport_enter_dns - Create a rport to the name server + * fc_rport_enter_dns() - Create a rport to the name server * @lport: Fibre Channel local port requesting a rport for the name server * * Locking Note: The lport lock is expected to be held before calling @@ -1296,7 +1295,7 @@ err: } /** - * fc_lport_timeout - Handler for the retry_work timer. + * fc_lport_timeout() - Handler for the retry_work timer. * @work: The work struct of the fc_lport */ static void fc_lport_timeout(struct work_struct *work) @@ -1337,7 +1336,7 @@ static void fc_lport_timeout(struct work_struct *work) } /** - * fc_lport_logo_resp - Handle response to LOGO request + * fc_lport_logo_resp() - Handle response to LOGO request * @sp: current sequence in LOGO exchange * @fp: response frame * @lp_arg: Fibre Channel lport port instance that sent the LOGO request @@ -1383,7 +1382,7 @@ err: } /** - * fc_rport_enter_logo - Logout of the fabric + * fc_rport_enter_logo() - Logout of the fabric * @lport: Fibre Channel local port to be logged out * * Locking Note: The lport lock is expected to be held before calling @@ -1415,7 +1414,7 @@ static void fc_lport_enter_logo(struct fc_lport *lport) } /** - * fc_lport_flogi_resp - Handle response to FLOGI request + * fc_lport_flogi_resp() - Handle response to FLOGI request * @sp: current sequence in FLOGI exchange * @fp: response frame * @lp_arg: Fibre Channel lport port instance that sent the FLOGI request @@ -1510,7 +1509,7 @@ err: } /** - * fc_rport_enter_flogi - Send a FLOGI request to the fabric manager + * fc_rport_enter_flogi() - Send a FLOGI request to the fabric manager * @lport: Fibre Channel local port to be logged in to the fabric * * Locking Note: The lport lock is expected to be held before calling diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index 4f23a9bb15a..6f07de15c49 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -146,7 +146,7 @@ struct fc_rport *fc_rport_rogue_create(struct fc_disc_port *dp) } /** - * fc_rport_state - return a string for the state the rport is in + * fc_rport_state() - return a string for the state the rport is in * @rport: The rport whose state we want to get a string for */ static const char *fc_rport_state(struct fc_rport *rport) @@ -161,7 +161,7 @@ static const char *fc_rport_state(struct fc_rport *rport) } /** - * fc_set_rport_loss_tmo - Set the remote port loss timeout in seconds. + * fc_set_rport_loss_tmo() - Set the remote port loss timeout in seconds. * @rport: Pointer to Fibre Channel remote port structure * @timeout: timeout in seconds */ @@ -175,7 +175,7 @@ void fc_set_rport_loss_tmo(struct fc_rport *rport, u32 timeout) EXPORT_SYMBOL(fc_set_rport_loss_tmo); /** - * fc_plogi_get_maxframe - Get max payload from the common service parameters + * fc_plogi_get_maxframe() - Get max payload from the common service parameters * @flp: FLOGI payload structure * @maxval: upper limit, may be less than what is in the service parameters */ @@ -198,7 +198,7 @@ fc_plogi_get_maxframe(struct fc_els_flogi *flp, unsigned int maxval) } /** - * fc_rport_state_enter - Change the rport's state + * fc_rport_state_enter() - Change the rport's state * @rport: The rport whose state should change * @new: The new state of the rport * @@ -292,7 +292,7 @@ static void fc_rport_work(struct work_struct *work) } /** - * fc_rport_login - Start the remote port login state machine + * fc_rport_login() - Start the remote port login state machine * @rport: Fibre Channel remote port * * Locking Note: Called without the rport lock held. This @@ -315,7 +315,7 @@ int fc_rport_login(struct fc_rport *rport) } /** - * fc_rport_logoff - Logoff and remove an rport + * fc_rport_logoff() - Logoff and remove an rport * @rport: Fibre Channel remote port to be removed * * Locking Note: Called without the rport lock held. This @@ -353,7 +353,7 @@ int fc_rport_logoff(struct fc_rport *rport) } /** - * fc_rport_enter_ready - The rport is ready + * fc_rport_enter_ready() - The rport is ready * @rport: Fibre Channel remote port that is ready * * Locking Note: The rport lock is expected to be held before calling @@ -372,7 +372,7 @@ static void fc_rport_enter_ready(struct fc_rport *rport) } /** - * fc_rport_timeout - Handler for the retry_work timer. + * fc_rport_timeout() - Handler for the retry_work timer. * @work: The work struct of the fc_rport_libfc_priv * * Locking Note: Called without the rport lock held. This @@ -411,7 +411,7 @@ static void fc_rport_timeout(struct work_struct *work) } /** - * fc_rport_error - Error handler, called once retries have been exhausted + * fc_rport_error() - Error handler, called once retries have been exhausted * @rport: The fc_rport object * @fp: The frame pointer * @@ -444,7 +444,7 @@ static void fc_rport_error(struct fc_rport *rport, struct fc_frame *fp) } /** - * fc_rport_error_retry - Error handler when retries are desired + * fc_rport_error_retry() - Error handler when retries are desired * @rport: The fc_rport object * @fp: The frame pointer * @@ -479,7 +479,7 @@ static void fc_rport_error_retry(struct fc_rport *rport, struct fc_frame *fp) } /** - * fc_rport_plogi_recv_resp - Handle incoming ELS PLOGI response + * fc_rport_plogi_recv_resp() - Handle incoming ELS PLOGI response * @sp: current sequence in the PLOGI exchange * @fp: response frame * @rp_arg: Fibre Channel remote port @@ -554,7 +554,7 @@ err: } /** - * fc_rport_enter_plogi - Send Port Login (PLOGI) request to peer + * fc_rport_enter_plogi() - Send Port Login (PLOGI) request to peer * @rport: Fibre Channel remote port to send PLOGI to * * Locking Note: The rport lock is expected to be held before calling @@ -587,7 +587,7 @@ static void fc_rport_enter_plogi(struct fc_rport *rport) } /** - * fc_rport_prli_resp - Process Login (PRLI) response handler + * fc_rport_prli_resp() - Process Login (PRLI) response handler * @sp: current sequence in the PRLI exchange * @fp: response frame * @rp_arg: Fibre Channel remote port @@ -657,7 +657,7 @@ err: } /** - * fc_rport_logo_resp - Logout (LOGO) response handler + * fc_rport_logo_resp() - Logout (LOGO) response handler * @sp: current sequence in the LOGO exchange * @fp: response frame * @rp_arg: Fibre Channel remote port @@ -706,7 +706,7 @@ err: } /** - * fc_rport_enter_prli - Send Process Login (PRLI) request to peer + * fc_rport_enter_prli() - Send Process Login (PRLI) request to peer * @rport: Fibre Channel remote port to send PRLI to * * Locking Note: The rport lock is expected to be held before calling @@ -741,7 +741,7 @@ static void fc_rport_enter_prli(struct fc_rport *rport) } /** - * fc_rport_els_rtv_resp - Request Timeout Value response handler + * fc_rport_els_rtv_resp() - Request Timeout Value response handler * @sp: current sequence in the RTV exchange * @fp: response frame * @rp_arg: Fibre Channel remote port @@ -807,7 +807,7 @@ err: } /** - * fc_rport_enter_rtv - Send Request Timeout Value (RTV) request to peer + * fc_rport_enter_rtv() - Send Request Timeout Value (RTV) request to peer * @rport: Fibre Channel remote port to send RTV to * * Locking Note: The rport lock is expected to be held before calling @@ -838,7 +838,7 @@ static void fc_rport_enter_rtv(struct fc_rport *rport) } /** - * fc_rport_enter_logo - Send Logout (LOGO) request to peer + * fc_rport_enter_logo() - Send Logout (LOGO) request to peer * @rport: Fibre Channel remote port to send LOGO to * * Locking Note: The rport lock is expected to be held before calling @@ -870,7 +870,7 @@ static void fc_rport_enter_logo(struct fc_rport *rport) /** - * fc_rport_recv_req - Receive a request from a rport + * fc_rport_recv_req() - Receive a request from a rport * @sp: current sequence in the PLOGI exchange * @fp: response frame * @rp_arg: Fibre Channel remote port @@ -931,7 +931,7 @@ void fc_rport_recv_req(struct fc_seq *sp, struct fc_frame *fp, } /** - * fc_rport_recv_plogi_req - Handle incoming Port Login (PLOGI) request + * fc_rport_recv_plogi_req() - Handle incoming Port Login (PLOGI) request * @rport: Fibre Channel remote port that initiated PLOGI * @sp: current sequence in the PLOGI exchange * @fp: PLOGI request frame @@ -1053,7 +1053,7 @@ static void fc_rport_recv_plogi_req(struct fc_rport *rport, } /** - * fc_rport_recv_prli_req - Handle incoming Process Login (PRLI) request + * fc_rport_recv_prli_req() - Handle incoming Process Login (PRLI) request * @rport: Fibre Channel remote port that initiated PRLI * @sp: current sequence in the PRLI exchange * @fp: PRLI request frame @@ -1204,7 +1204,7 @@ static void fc_rport_recv_prli_req(struct fc_rport *rport, } /** - * fc_rport_recv_prlo_req - Handle incoming Process Logout (PRLO) request + * fc_rport_recv_prlo_req() - Handle incoming Process Logout (PRLO) request * @rport: Fibre Channel remote port that initiated PRLO * @sp: current sequence in the PRLO exchange * @fp: PRLO request frame @@ -1235,7 +1235,7 @@ static void fc_rport_recv_prlo_req(struct fc_rport *rport, struct fc_seq *sp, } /** - * fc_rport_recv_logo_req - Handle incoming Logout (LOGO) request + * fc_rport_recv_logo_req() - Handle incoming Logout (LOGO) request * @rport: Fibre Channel remote port that initiated LOGO * @sp: current sequence in the LOGO exchange * @fp: LOGO request frame -- cgit v1.2.3 From b2ab99c9a300e572105d6db7f6efe0a4d1572167 Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 27 Feb 2009 10:55:50 -0800 Subject: [SCSI] libfc, fcoe: Cleanup function formatting and minor typos 1) There were a few functions with a strange layout, i.e. all arguments on the second line, when not necessary. Where ever possible I moved the return value to the same line as the function name. However, when the line was too long to have a single argument on the same line I moved the return value to above line. For example: (, ) and (, ) 2) Removed one extra whitespace line 3) Fixed two typos Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fc_transport_fcoe.c | 11 ++++++----- drivers/scsi/fcoe/libfcoe.c | 15 +++++++-------- drivers/scsi/libfc/fc_exch.c | 10 +++++----- drivers/scsi/libfc/fc_rport.c | 4 ++-- 4 files changed, 20 insertions(+), 20 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/fcoe/fc_transport_fcoe.c b/drivers/scsi/fcoe/fc_transport_fcoe.c index 0eea4c434c3..847453a70c6 100644 --- a/drivers/scsi/fcoe/fc_transport_fcoe.c +++ b/drivers/scsi/fcoe/fc_transport_fcoe.c @@ -62,8 +62,9 @@ struct pci_dev *fcoe_transport_pcidev(const struct net_device *netdev) * * Returns: 0 for success */ -static struct fcoe_transport_internal *fcoe_transport_device_lookup( - struct fcoe_transport *t, struct net_device *netdev) +static struct fcoe_transport_internal * +fcoe_transport_device_lookup(struct fcoe_transport *t, + struct net_device *netdev) { struct fcoe_transport_internal *ti; @@ -184,7 +185,7 @@ static void fcoe_transport_device_remove_all(struct fcoe_transport *t) * Returns: true for match up */ static bool fcoe_transport_match(struct fcoe_transport *t, - struct net_device *netdev) + struct net_device *netdev) { /* match transport by vendor and device id */ struct pci_dev *pci; @@ -217,8 +218,8 @@ static bool fcoe_transport_match(struct fcoe_transport *t, * * TODO: return default sw transport if no other transport is found */ -static struct fcoe_transport *fcoe_transport_lookup( - struct net_device *netdev) +static struct fcoe_transport * +fcoe_transport_lookup(struct net_device *netdev) { struct fcoe_transport *t; diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index 5e68652985b..d006d657681 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -949,8 +949,8 @@ static struct net_device *fcoe_if_to_netdev(const char *buffer) * * Returns: ptr to the struct module, NULL for failure */ -static struct module *fcoe_netdev_to_module_owner( - const struct net_device *netdev) +static struct module * +fcoe_netdev_to_module_owner(const struct net_device *netdev) { struct device *dev; @@ -1205,8 +1205,8 @@ EXPORT_SYMBOL_GPL(fcoe_clean_pending_queue); * Returns: ptr to Scsi_Host * TODO: to libfc? */ -static inline struct Scsi_Host *libfc_host_alloc( - struct scsi_host_template *sht, int priv_size) +static inline struct Scsi_Host * +libfc_host_alloc(struct scsi_host_template *sht, int priv_size) { return scsi_host_alloc(sht, sizeof(struct fc_lport) + priv_size); } @@ -1285,8 +1285,8 @@ EXPORT_SYMBOL_GPL(fcoe_wwn_from_mac); * * Returns: NULL or the located fcoe_softc */ -static struct fcoe_softc *fcoe_hostlist_lookup_softc( - const struct net_device *dev) +static struct fcoe_softc * +fcoe_hostlist_lookup_softc(const struct net_device *dev) { struct fcoe_softc *fc; @@ -1426,7 +1426,6 @@ static int __init fcoe_init(void) } else { fcoe_percpu[cpu] = NULL; kfree(p); - } } } @@ -1476,7 +1475,7 @@ static void __exit fcoe_exit(void) */ del_timer_sync(&fcoe_timer); - /* releases the assocaited fcoe transport for each lport */ + /* releases the associated fcoe transport for each lport */ list_for_each_entry_safe(fc, tmp, &fcoe_hostlist, list) fcoe_transport_release(fc->real_dev); diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index 8c4018956d4..7b933954c10 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -675,8 +675,8 @@ static struct fc_exch *fc_exch_resp(struct fc_exch_mgr *mp, struct fc_frame *fp) * If fc_pf_rjt_reason is FC_RJT_NONE then this function will have a hold * on the ep that should be released by the caller. */ -static enum fc_pf_rjt_reason -fc_seq_lookup_recip(struct fc_exch_mgr *mp, struct fc_frame *fp) +static enum fc_pf_rjt_reason fc_seq_lookup_recip(struct fc_exch_mgr *mp, + struct fc_frame *fp) { struct fc_frame_header *fh = fc_frame_header_get(fp); struct fc_exch *ep = NULL; @@ -994,9 +994,9 @@ static void fc_seq_send_ack(struct fc_seq *sp, const struct fc_frame *rx_fp) * Send BLS Reject. * This is for rejecting BA_ABTS only. */ -static void -fc_exch_send_ba_rjt(struct fc_frame *rx_fp, enum fc_ba_rjt_reason reason, - enum fc_ba_rjt_explan explan) +static void fc_exch_send_ba_rjt(struct fc_frame *rx_fp, + enum fc_ba_rjt_reason reason, + enum fc_ba_rjt_explan explan) { struct fc_frame *fp; struct fc_frame_header *rx_fh; diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index 6f07de15c49..dae65133a83 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -179,8 +179,8 @@ EXPORT_SYMBOL(fc_set_rport_loss_tmo); * @flp: FLOGI payload structure * @maxval: upper limit, may be less than what is in the service parameters */ -static unsigned int -fc_plogi_get_maxframe(struct fc_els_flogi *flp, unsigned int maxval) +static unsigned int fc_plogi_get_maxframe(struct fc_els_flogi *flp, + unsigned int maxval) { unsigned int mfs; -- cgit v1.2.3 From fc47ff6b1b27fb736f255ed8cd490356e0cd228f Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 27 Feb 2009 10:55:55 -0800 Subject: [SCSI] libfc, fcoe: Remove unnecessary cast by removing inline wrapper Comment from "Andrew Morton " > +{ > + return (struct fcoe_softc *)lport_priv(lp); unneeded/undesirable cast of void*. There are probably zillions of instances of this - there always are. This whole inline function was unnecessary. The FCoE layer knows that it's data structure is stored in the lport private data, it can just access it from lport_priv(). Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fcoe_sw.c | 2 +- drivers/scsi/fcoe/libfcoe.c | 12 ++++++------ 2 files changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/fcoe/fcoe_sw.c b/drivers/scsi/fcoe/fcoe_sw.c index 007d1fbae80..f667dce1bbb 100644 --- a/drivers/scsi/fcoe/fcoe_sw.c +++ b/drivers/scsi/fcoe/fcoe_sw.c @@ -297,7 +297,7 @@ static int fcoe_sw_destroy(struct net_device *netdev) if (!lp) return -ENODEV; - fc = fcoe_softc(lp); + fc = lport_priv(lp); /* Logout of the fabric */ fc_fabric_logoff(lp); diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index d006d657681..02f044a8715 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -387,7 +387,7 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp) WARN_ON((fr_len(fp) % sizeof(u32)) != 0); - fc = fcoe_softc(lp); + fc = lport_priv(lp); /* * if it is a flogi then we need to learn gw-addr * and my own fcid @@ -768,7 +768,7 @@ static int fcoe_check_wait_queue(struct fc_lport *lp) struct sk_buff *skb; struct fcoe_softc *fc; - fc = fcoe_softc(lp); + fc = lport_priv(lp); spin_lock_bh(&fc->fcoe_pending_queue.lock); /* @@ -805,7 +805,7 @@ static void fcoe_insert_wait_queue_head(struct fc_lport *lp, { struct fcoe_softc *fc; - fc = fcoe_softc(lp); + fc = lport_priv(lp); spin_lock_bh(&fc->fcoe_pending_queue.lock); __skb_queue_head(&fc->fcoe_pending_queue, skb); spin_unlock_bh(&fc->fcoe_pending_queue.lock); @@ -823,7 +823,7 @@ static void fcoe_insert_wait_queue(struct fc_lport *lp, { struct fcoe_softc *fc; - fc = fcoe_softc(lp); + fc = lport_priv(lp); spin_lock_bh(&fc->fcoe_pending_queue.lock); __skb_queue_tail(&fc->fcoe_pending_queue, skb); spin_unlock_bh(&fc->fcoe_pending_queue.lock); @@ -1113,7 +1113,7 @@ MODULE_PARM_DESC(destroy, "Destroy fcoe port"); */ int fcoe_link_ok(struct fc_lport *lp) { - struct fcoe_softc *fc = fcoe_softc(lp); + struct fcoe_softc *fc = lport_priv(lp); struct net_device *dev = fc->real_dev; struct ethtool_cmd ecmd = { ETHTOOL_GSET }; int rc = 0; @@ -1329,7 +1329,7 @@ int fcoe_hostlist_add(const struct fc_lport *lp) fc = fcoe_hostlist_lookup_softc(fcoe_netdev(lp)); if (!fc) { - fc = fcoe_softc(lp); + fc = lport_priv(lp); write_lock_bh(&fcoe_hostlist_lock); list_add_tail(&fc->list, &fcoe_hostlist); write_unlock_bh(&fcoe_hostlist_lock); -- cgit v1.2.3 From a468f328ad83f14556e5961ef1de80b32b428d32 Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 27 Feb 2009 10:56:00 -0800 Subject: [SCSI] fcoe: Use setup_timer() and mod_timer() Use helper functions for watchdog timer setup. Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/libfcoe.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index 02f044a8715..7887f2a7c2a 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -1435,11 +1435,9 @@ static int __init fcoe_init(void) */ fcoe_dev_setup(); - init_timer(&fcoe_timer); - fcoe_timer.data = 0; - fcoe_timer.function = fcoe_watchdog; - fcoe_timer.expires = (jiffies + (10 * HZ)); - add_timer(&fcoe_timer); + setup_timer(&fcoe_timer, fcoe_watchdog, 0); + + mod_timer(&fcoe_timer, jiffies + (10 * HZ)); /* initiatlize the fcoe transport */ fcoe_transport_init(); -- cgit v1.2.3 From 03ec862dff57ca3d1fcb439b99aadc45bc5c2f28 Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 27 Feb 2009 10:56:06 -0800 Subject: [SCSI] fcoe: Correct fcoe_transports initialization vs. registration The registration function shouldn't initialize the mutex or list head. The fcoe SW transport should initialize itself before registering. Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fc_transport_fcoe.c | 3 --- drivers/scsi/fcoe/fcoe_sw.c | 5 +++++ 2 files changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/fcoe/fc_transport_fcoe.c b/drivers/scsi/fcoe/fc_transport_fcoe.c index 847453a70c6..8862758006c 100644 --- a/drivers/scsi/fcoe/fc_transport_fcoe.c +++ b/drivers/scsi/fcoe/fc_transport_fcoe.c @@ -258,9 +258,6 @@ int fcoe_transport_register(struct fcoe_transport *t) list_add_tail(&t->list, &fcoe_transports); mutex_unlock(&fcoe_transports_lock); - mutex_init(&t->devlock); - INIT_LIST_HEAD(&t->devlist); - printk(KERN_DEBUG "fcoe_transport_register:%s\n", t->name); return 0; diff --git a/drivers/scsi/fcoe/fcoe_sw.c b/drivers/scsi/fcoe/fcoe_sw.c index f667dce1bbb..37d359db164 100644 --- a/drivers/scsi/fcoe/fcoe_sw.c +++ b/drivers/scsi/fcoe/fcoe_sw.c @@ -467,10 +467,15 @@ int __init fcoe_sw_init(void) /* attach to scsi transport */ scsi_transport_fcoe_sw = fc_attach_transport(&fcoe_sw_transport_function); + if (!scsi_transport_fcoe_sw) { printk(KERN_ERR "fcoe_sw_init:fc_attach_transport() failed\n"); return -ENODEV; } + + mutex_init(&fcoe_sw_transport.devlock); + INIT_LIST_HEAD(&fcoe_sw_transport.devlist); + /* register sw transport */ fcoe_transport_register(&fcoe_sw_transport); return 0; -- cgit v1.2.3 From 422819cfa3a2605a0b3bdc33aaef0bc2feaeaada Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Fri, 27 Feb 2009 10:56:11 -0800 Subject: [SCSI] libfc: do not change the fh_rx_id of a recevied frame We shouldn't be altering inbound frames. Signed-off-by: Yi Zou Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_exch.c | 13 ------------- 1 file changed, 13 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index 7b933954c10..505825b6124 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -625,7 +625,6 @@ static struct fc_exch *fc_exch_resp(struct fc_exch_mgr *mp, struct fc_frame *fp) { struct fc_exch *ep; struct fc_frame_header *fh; - u16 rxid; ep = mp->lp->tt.exch_get(mp->lp, fp); if (ep) { @@ -652,18 +651,6 @@ static struct fc_exch *fc_exch_resp(struct fc_exch_mgr *mp, struct fc_frame *fp) if ((ntoh24(fh->fh_f_ctl) & FC_FC_SEQ_INIT) == 0) ep->esb_stat &= ~ESB_ST_SEQ_INIT; - /* - * Set the responder ID in the frame header. - * The old one should've been 0xffff. - * If it isn't, don't assign one. - * Incoming basic link service frames may specify - * a referenced RX_ID. - */ - if (fh->fh_type != FC_TYPE_BLS) { - rxid = ntohs(fh->fh_rx_id); - WARN_ON(rxid != FC_XID_UNKNOWN); - fh->fh_rx_id = htons(ep->rxid); - } fc_exch_hold(ep); /* hold for caller */ spin_unlock_bh(&ep->ex_lock); /* lock from exch_get */ } -- cgit v1.2.3 From e904158159e9812d06646767b7c81846dc3b05e6 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 27 Feb 2009 10:56:22 -0800 Subject: [SCSI] fcoe: fix kfree(skb) Use kfree_skb instead of kfree for struct sk_buff pointers. Signed-off-by: Roel Kluin Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/libfcoe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index 7887f2a7c2a..7265e093799 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -437,7 +437,7 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp) if (skb_is_nonlinear(skb)) { skb_frag_t *frag; if (fcoe_get_paged_crc_eof(skb, tlen)) { - kfree(skb); + kfree_skb(skb); return -ENOMEM; } frag = &skb_shinfo(skb)->frags[skb_shinfo(skb)->nr_frags - 1]; -- cgit v1.2.3 From c826a3145736e3baabebccfd0aecfbb6dae059f2 Mon Sep 17 00:00:00 2001 From: Vasu Dev Date: Fri, 27 Feb 2009 10:56:27 -0800 Subject: [SCSI] fcoe: Out of order tx frames was causing several check condition SCSI status frames followed by these errors in log. [sdp] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [sdp] Sense Key : Aborted Command [current] [sdp] Add. Sense: Data phase error This was causing some test apps to exit due to write failure under heavy load. This was due to a race around adding and removing tx frame skb in fcoe_pending_queue, Chris Leech helped me to find that brief unlocking period when pulling skb from fcoe_pending_queue in various contexts (fcoe_watchdog and fcoe_xmit) and then adding skb back into fcoe_pending_queue up on a failed fcoe_start_io could change skb/tx frame order in fcoe_pending_queue. Thanks Chris. This patch allows only single context to pull skb from fcoe_pending_queue at any time to prevent above described ordering issue/race by use of fcoe_pending_queue_active flag. This patch simplified fcoe_watchdog with modified fcoe_check_wait_queue by use of FCOE_LOW_QUEUE_DEPTH instead previously used several conditionals to clear and set lp->qfull. I think FCOE_MAX_QUEUE_DEPTH with FCOE_LOW_QUEUE_DEPTH will work better in re/setting lp->qfull and these could be fine tuned for performance. Signed-off-by: Vasu Dev Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fcoe_sw.c | 1 + drivers/scsi/fcoe/libfcoe.c | 45 +++++++++++++++++++++------------------------ 2 files changed, 22 insertions(+), 24 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/fcoe/fcoe_sw.c b/drivers/scsi/fcoe/fcoe_sw.c index 37d359db164..da210eba194 100644 --- a/drivers/scsi/fcoe/fcoe_sw.c +++ b/drivers/scsi/fcoe/fcoe_sw.c @@ -188,6 +188,7 @@ static int fcoe_sw_netdev_config(struct fc_lport *lp, struct net_device *netdev) skb_queue_head_init(&fc->fcoe_pending_queue); + fc->fcoe_pending_queue_active = 0; /* setup Source Mac Address */ memcpy(fc->ctl_src_addr, fc->real_dev->dev_addr, diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index 7265e093799..14dd8a0402b 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -49,6 +49,7 @@ static int debug_fcoe; #define FCOE_MAX_QUEUE_DEPTH 256 +#define FCOE_LOW_QUEUE_DEPTH 32 /* destination address mode */ #define FCOE_GW_ADDR_MODE 0x00 @@ -723,21 +724,12 @@ static void fcoe_recv_flogi(struct fcoe_softc *fc, struct fc_frame *fp, u8 *sa) */ void fcoe_watchdog(ulong vp) { - struct fc_lport *lp; struct fcoe_softc *fc; - int qfilled = 0; read_lock(&fcoe_hostlist_lock); list_for_each_entry(fc, &fcoe_hostlist, list) { - lp = fc->lp; - if (lp) { - if (fc->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH) - qfilled = 1; - if (fcoe_check_wait_queue(lp) < FCOE_MAX_QUEUE_DEPTH) { - if (qfilled) - lp->qfull = 0; - } - } + if (fc->lp) + fcoe_check_wait_queue(fc->lp); } read_unlock(&fcoe_hostlist_lock); @@ -753,8 +745,8 @@ void fcoe_watchdog(ulong vp) * * This empties the wait_queue, dequeue the head of the wait_queue queue * and calls fcoe_start_io() for each packet, if all skb have been - * transmitted, return 0 if a error occurs, then restore wait_queue and - * try again later. + * transmitted, return qlen or -1 if a error occurs, then restore + * wait_queue and try again later. * * The wait_queue is used when the skb transmit fails. skb will go * in the wait_queue which will be emptied by the time function OR @@ -764,33 +756,38 @@ void fcoe_watchdog(ulong vp) */ static int fcoe_check_wait_queue(struct fc_lport *lp) { - int rc; struct sk_buff *skb; struct fcoe_softc *fc; + int rc = -1; fc = lport_priv(lp); spin_lock_bh(&fc->fcoe_pending_queue.lock); - /* - * if interface pending queue full then set qfull in lport. - */ - if (fc->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH) - lp->qfull = 1; + if (fc->fcoe_pending_queue_active) + goto out; + fc->fcoe_pending_queue_active = 1; if (fc->fcoe_pending_queue.qlen) { while ((skb = __skb_dequeue(&fc->fcoe_pending_queue)) != NULL) { spin_unlock_bh(&fc->fcoe_pending_queue.lock); rc = fcoe_start_io(skb); - if (rc) { + if (rc) fcoe_insert_wait_queue_head(lp, skb); - return rc; - } spin_lock_bh(&fc->fcoe_pending_queue.lock); + if (rc) + break; } - if (fc->fcoe_pending_queue.qlen < FCOE_MAX_QUEUE_DEPTH) + /* + * if interface pending queue is below FCOE_LOW_QUEUE_DEPTH + * then clear qfull flag. + */ + if (fc->fcoe_pending_queue.qlen < FCOE_LOW_QUEUE_DEPTH) lp->qfull = 0; } + fc->fcoe_pending_queue_active = 0; + rc = fc->fcoe_pending_queue.qlen; +out: spin_unlock_bh(&fc->fcoe_pending_queue.lock); - return fc->fcoe_pending_queue.qlen; + return rc; } /** -- cgit v1.2.3 From 55c8bafba549e3e82f6999db8c5a62fc3c255c14 Mon Sep 17 00:00:00 2001 From: Chris Leech Date: Fri, 27 Feb 2009 10:56:32 -0800 Subject: [SCSI] fcoe: fix handling of pending queue, prevent out of order frames (v3) In fcoe_check_wait_queue() the queue length could temporarily drop to 0, before the last frame was successfully sent. This resulted in out of order data frames within a single sequence, leading to IO timeout errors. This builds on the approach from Vasu Dev to only fix the queue management in fcoe_check_wait_queue, where my first patch added locking to the transmit path even when the pending queue was not in use. This patch continues to use fcoe_pending_queue.qlen instead of introducing a new length counter, but takes precautions to ensure it never drops to 0 before the final frame in the queue has successfully been passed to the netdev qdisc layer. It also includes some cleanup of fcoe_check_wait_queue and removes the fcoe_insert_wait_queue(_head) wrapper functions. Signed-off-by: Chris Leech Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/libfcoe.c | 81 ++++++++++++++------------------------------- 1 file changed, 24 insertions(+), 57 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index 14dd8a0402b..0e0b494fc17 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -70,8 +70,6 @@ struct fcoe_percpu_s *fcoe_percpu[NR_CPUS]; /* Function Prototyes */ static int fcoe_check_wait_queue(struct fc_lport *); -static void fcoe_insert_wait_queue_head(struct fc_lport *, struct sk_buff *); -static void fcoe_insert_wait_queue(struct fc_lport *, struct sk_buff *); static void fcoe_recv_flogi(struct fcoe_softc *, struct fc_frame *, u8 *); #ifdef CONFIG_HOTPLUG_CPU static int fcoe_cpu_callback(struct notifier_block *, ulong, void *); @@ -501,7 +499,9 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp) rc = fcoe_start_io(skb); if (rc) { - fcoe_insert_wait_queue(lp, skb); + spin_lock_bh(&fc->fcoe_pending_queue.lock); + __skb_queue_tail(&fc->fcoe_pending_queue, skb); + spin_unlock_bh(&fc->fcoe_pending_queue.lock); if (fc->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH) lp->qfull = 1; } @@ -756,33 +756,36 @@ void fcoe_watchdog(ulong vp) */ static int fcoe_check_wait_queue(struct fc_lport *lp) { + struct fcoe_softc *fc = lport_priv(lp); struct sk_buff *skb; - struct fcoe_softc *fc; int rc = -1; - fc = lport_priv(lp); spin_lock_bh(&fc->fcoe_pending_queue.lock); - if (fc->fcoe_pending_queue_active) goto out; fc->fcoe_pending_queue_active = 1; - if (fc->fcoe_pending_queue.qlen) { - while ((skb = __skb_dequeue(&fc->fcoe_pending_queue)) != NULL) { - spin_unlock_bh(&fc->fcoe_pending_queue.lock); - rc = fcoe_start_io(skb); - if (rc) - fcoe_insert_wait_queue_head(lp, skb); - spin_lock_bh(&fc->fcoe_pending_queue.lock); - if (rc) - break; + + while (fc->fcoe_pending_queue.qlen) { + /* keep qlen > 0 until fcoe_start_io succeeds */ + fc->fcoe_pending_queue.qlen++; + skb = __skb_dequeue(&fc->fcoe_pending_queue); + + spin_unlock_bh(&fc->fcoe_pending_queue.lock); + rc = fcoe_start_io(skb); + spin_lock_bh(&fc->fcoe_pending_queue.lock); + + if (rc) { + __skb_queue_head(&fc->fcoe_pending_queue, skb); + /* undo temporary increment above */ + fc->fcoe_pending_queue.qlen--; + break; } - /* - * if interface pending queue is below FCOE_LOW_QUEUE_DEPTH - * then clear qfull flag. - */ - if (fc->fcoe_pending_queue.qlen < FCOE_LOW_QUEUE_DEPTH) - lp->qfull = 0; + /* undo temporary increment above */ + fc->fcoe_pending_queue.qlen--; } + + if (fc->fcoe_pending_queue.qlen < FCOE_LOW_QUEUE_DEPTH) + lp->qfull = 0; fc->fcoe_pending_queue_active = 0; rc = fc->fcoe_pending_queue.qlen; out: @@ -790,42 +793,6 @@ out: return rc; } -/** - * fcoe_insert_wait_queue_head() - puts skb to fcoe pending queue head - * @lp: the fc_port for this skb - * @skb: the associated skb to be xmitted - * - * Returns: none - */ -static void fcoe_insert_wait_queue_head(struct fc_lport *lp, - struct sk_buff *skb) -{ - struct fcoe_softc *fc; - - fc = lport_priv(lp); - spin_lock_bh(&fc->fcoe_pending_queue.lock); - __skb_queue_head(&fc->fcoe_pending_queue, skb); - spin_unlock_bh(&fc->fcoe_pending_queue.lock); -} - -/** - * fcoe_insert_wait_queue() - put the skb into fcoe pending queue tail - * @lp: the fc_port for this skb - * @skb: the associated skb to be xmitted - * - * Returns: none - */ -static void fcoe_insert_wait_queue(struct fc_lport *lp, - struct sk_buff *skb) -{ - struct fcoe_softc *fc; - - fc = lport_priv(lp); - spin_lock_bh(&fc->fcoe_pending_queue.lock); - __skb_queue_tail(&fc->fcoe_pending_queue, skb); - spin_unlock_bh(&fc->fcoe_pending_queue.lock); -} - /** * fcoe_dev_setup() - setup link change notification interface */ -- cgit v1.2.3 From 4469c195da43bf8220f53da8b576c0e154c2b662 Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 27 Feb 2009 10:56:38 -0800 Subject: [SCSI] fcoe: Change fcoe receive thread nice value from 19 (lowest priority) to -20 This change makes the fcoe Rx threads have the same nice value as lpfc and qla2xxx Rx threads. Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/libfcoe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index 0e0b494fc17..5548bf3bb58 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -531,7 +531,7 @@ int fcoe_percpu_receive_thread(void *arg) struct fcoe_softc *fc; struct fcoe_hdr *hp; - set_user_nice(current, 19); + set_user_nice(current, -20); while (!kthread_should_stop()) { -- cgit v1.2.3 From 6431c5dc5eeaa79863b4af300c081a01e2ccd0bb Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 5 Mar 2009 11:07:00 -0800 Subject: [SCSI] qla2xxx: Correct address range checking for option-rom updates. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_attr.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index f4c57227ec1..ee9d4015243 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -244,12 +244,6 @@ qla2x00_sysfs_write_optrom_ctl(struct kobject *kobj, if (ha->optrom_state != QLA_SWAITING) break; - if (start & 0xfff) { - qla_printk(KERN_WARNING, ha, - "Invalid start region 0x%x/0x%x.\n", start, size); - return -EINVAL; - } - ha->optrom_region_start = start; ha->optrom_region_size = start + size > ha->optrom_size ? ha->optrom_size - start : size; @@ -303,8 +297,7 @@ qla2x00_sysfs_write_optrom_ctl(struct kobject *kobj, else if (start == (ha->flt_region_boot * 4) || start == (ha->flt_region_fw * 4)) valid = 1; - else if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && - start == (ha->flt_region_vpd_nvram * 4)) + else if (IS_QLA25XX(ha) || IS_QLA81XX(ha)) valid = 1; if (!valid) { qla_printk(KERN_WARNING, ha, -- cgit v1.2.3 From 605aa2bcd5e9dddc4666f12e0c19822809186d6d Mon Sep 17 00:00:00 2001 From: Lalit Chandivade Date: Thu, 5 Mar 2009 11:07:01 -0800 Subject: [SCSI] qla2xxx: Use correct value for max vport in LOOP topology. Use minimum value for max vport during firmware initialization in LOOP topology. Using max vport value from get resource count in LOOP topology causes firmware initialization failure. Signed-off-by: Lalit Chandivade Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_init.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 986501759ad..14325c02733 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -1308,8 +1308,12 @@ qla2x00_init_rings(scsi_qla_host_t *vha) DEBUG(printk("scsi(%ld): Issue init firmware.\n", vha->host_no)); - if (ha->flags.npiv_supported) + if (ha->flags.npiv_supported) { + if (ha->operating_mode == LOOP) + ha->max_npiv_vports = MIN_MULTI_ID_FABRIC - 1; mid_init_cb->count = cpu_to_le16(ha->max_npiv_vports); + } + mid_init_cb->options = __constant_cpu_to_le16(BIT_1); -- cgit v1.2.3 From ee546b6e048586381462ce7bb51c7ddc03819619 Mon Sep 17 00:00:00 2001 From: Anirban Chakraborty Date: Thu, 5 Mar 2009 11:07:02 -0800 Subject: [SCSI] qla2xxx: Correct vport delete bug. Signed-off-by: Anirban Chakraborty Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_init.c | 11 +++++++---- drivers/scsi/qla2xxx/qla_mbx.c | 3 ++- drivers/scsi/qla2xxx/qla_mid.c | 10 ++++++---- 3 files changed, 15 insertions(+), 9 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 14325c02733..e54ab2f1079 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -2614,6 +2614,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha, port_id_t wrap, nxt_d_id; struct qla_hw_data *ha = vha->hw; struct scsi_qla_host *vp, *base_vha = pci_get_drvdata(ha->pdev); + struct scsi_qla_host *tvp; rval = QLA_SUCCESS; @@ -2713,7 +2714,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha, /* Bypass virtual ports of the same host. */ found = 0; if (ha->num_vhosts) { - list_for_each_entry(vp, &ha->vp_list, list) { + list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) { if (new_fcport->d_id.b24 == vp->d_id.b24) { found = 1; break; @@ -2836,6 +2837,7 @@ qla2x00_find_new_loop_id(scsi_qla_host_t *vha, fc_port_t *dev) uint16_t first_loop_id; struct qla_hw_data *ha = vha->hw; struct scsi_qla_host *vp; + struct scsi_qla_host *tvp; rval = QLA_SUCCESS; @@ -2860,7 +2862,7 @@ qla2x00_find_new_loop_id(scsi_qla_host_t *vha, fc_port_t *dev) /* Check for loop ID being already in use. */ found = 0; fcport = NULL; - list_for_each_entry(vp, &ha->vp_list, list) { + list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) { list_for_each_entry(fcport, &vp->vp_fcports, list) { if (fcport->loop_id == dev->loop_id && fcport != dev) { @@ -3295,6 +3297,7 @@ qla2x00_abort_isp(scsi_qla_host_t *vha) uint8_t status = 0; struct qla_hw_data *ha = vha->hw; struct scsi_qla_host *vp; + struct scsi_qla_host *tvp; struct req_que *req = ha->req_q_map[0]; if (vha->flags.online) { @@ -3310,7 +3313,7 @@ qla2x00_abort_isp(scsi_qla_host_t *vha) if (atomic_read(&vha->loop_state) != LOOP_DOWN) { atomic_set(&vha->loop_state, LOOP_DOWN); qla2x00_mark_all_devices_lost(vha, 0); - list_for_each_entry(vp, &ha->vp_list, list) + list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) qla2x00_mark_all_devices_lost(vp, 0); } else { if (!atomic_read(&vha->loop_down_timer)) @@ -3407,7 +3410,7 @@ qla2x00_abort_isp(scsi_qla_host_t *vha) DEBUG(printk(KERN_INFO "qla2x00_abort_isp(%ld): succeeded.\n", vha->host_no)); - list_for_each_entry(vp, &ha->vp_list, list) { + list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) { if (vp->vp_idx) qla2x00_vp_abort_isp(vp); } diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 4c7504cb399..4aab7acf752 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -2685,6 +2685,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha, uint16_t stat = le16_to_cpu(rptid_entry->vp_idx); struct qla_hw_data *ha = vha->hw; scsi_qla_host_t *vp; + scsi_qla_host_t *tvp; if (rptid_entry->entry_status != 0) return; @@ -2710,7 +2711,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha, if (MSB(stat) == 1) return; - list_for_each_entry(vp, &ha->vp_list, list) + list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) if (vp_idx == vp->vp_idx) break; if (!vp) diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c index 3f23932210c..785c61279e6 100644 --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -69,9 +69,10 @@ static scsi_qla_host_t * qla24xx_find_vhost_by_name(struct qla_hw_data *ha, uint8_t *port_name) { scsi_qla_host_t *vha; + struct scsi_qla_host *tvha; /* Locate matching device in database. */ - list_for_each_entry(vha, &ha->vp_list, list) { + list_for_each_entry_safe(vha, tvha, &ha->vp_list, list) { if (!memcmp(port_name, vha->port_name, WWN_SIZE)) return vha; } @@ -194,11 +195,11 @@ qla24xx_configure_vp(scsi_qla_host_t *vha) void qla2x00_alert_all_vps(struct rsp_que *rsp, uint16_t *mb) { - scsi_qla_host_t *vha; + scsi_qla_host_t *vha, *tvha; struct qla_hw_data *ha = rsp->hw; int i = 0; - list_for_each_entry(vha, &ha->vp_list, list) { + list_for_each_entry_safe(vha, tvha, &ha->vp_list, list) { if (vha->vp_idx) { switch (mb[0]) { case MBA_LIP_OCCURRED: @@ -300,6 +301,7 @@ qla2x00_do_dpc_all_vps(scsi_qla_host_t *vha) int ret; struct qla_hw_data *ha = vha->hw; scsi_qla_host_t *vp; + struct scsi_qla_host *tvp; if (vha->vp_idx) return; @@ -308,7 +310,7 @@ qla2x00_do_dpc_all_vps(scsi_qla_host_t *vha) clear_bit(VP_DPC_NEEDED, &vha->dpc_flags); - list_for_each_entry(vp, &ha->vp_list, list) { + list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) { if (vp->vp_idx) ret = qla2x00_do_dpc_vp(vp); } -- cgit v1.2.3 From c6b2fca8205dc33e3bb444835769e4ea4c6bc58d Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 5 Mar 2009 11:07:03 -0800 Subject: [SCSI] qla2xxx: Correct truncation in return-code status checking. QLA_* return codes are 'int' in size. There were still several legacy check-points which assumed a return-code width of 8-bits. This could cause incorrect assumptions of 'good' status if a return of QLA_FUNCTION_TIMEOUT. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_init.c | 2 +- drivers/scsi/qla2xxx/qla_os.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index e54ab2f1079..87f9abc7146 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -3435,7 +3435,7 @@ qla2x00_abort_isp(scsi_qla_host_t *vha) static int qla2x00_restart_isp(scsi_qla_host_t *vha) { - uint8_t status = 0; + int status = 0; uint32_t wait_time; struct qla_hw_data *ha = vha->hw; struct req_que *req = ha->req_q_map[0]; diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 2f5f72531e2..16c34760b95 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -2568,7 +2568,7 @@ qla2x00_do_work(struct scsi_qla_host *vha) void qla2x00_relogin(struct scsi_qla_host *vha) { fc_port_t *fcport; - uint8_t status; + int status; uint16_t next_loopid = 0; struct qla_hw_data *ha = vha->hw; -- cgit v1.2.3 From ca42f2b5f58702e5751e1423bd2f7987b0760eab Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 5 Mar 2009 11:07:04 -0800 Subject: [SCSI] qla2xxx: Correct overwrite of pre-assigned init-control-block structure size. The value is already pre-assigned prior to the qla2x00_mem_alloc(). Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_os.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 16c34760b95..3ddfa889e94 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -2222,10 +2222,6 @@ qla2x00_mem_alloc(struct qla_hw_data *ha, uint16_t req_len, uint16_t rsp_len, { char name[16]; - ha->init_cb_size = sizeof(init_cb_t); - if (IS_QLA2XXX_MIDTYPE(ha)) - ha->init_cb_size = sizeof(struct mid_init_cb_24xx); - ha->init_cb = dma_alloc_coherent(&ha->pdev->dev, ha->init_cb_size, &ha->init_cb_dma, GFP_KERNEL); if (!ha->init_cb) -- cgit v1.2.3 From 5fa0ae19822d60307059ee64b80ba9e5effdce58 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 5 Mar 2009 11:07:05 -0800 Subject: [SCSI] qla2xxx: Update version number to 8.03.00-k4. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index 79f7053da99..a772eab2f0e 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.03.00-k3" +#define QLA2XXX_VERSION "8.03.00-k4" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 3 -- cgit v1.2.3 From 7f384ce780c6091968fc848b14f17b45cb849e14 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Tue, 13 Jan 2009 21:14:51 +0100 Subject: parisc: fix dev_printk() compile warnings for accessing a device struct Fix compile warnings: drivers/scsi/zalon.c: In function `zalon_probe': drivers/scsi/zalon.c:140: warning: passing arg 1 of `dev_driver_string' from incompatible pointer type drivers/scsi/zalon.c:140: warning: passing arg 1 of `dev_name' from incompatible pointer type Signed-off-by: Helge Deller Signed-off-by: Kyle McMartin --- drivers/scsi/lasi700.c | 2 +- drivers/scsi/zalon.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/lasi700.c b/drivers/scsi/lasi700.c index 4a4e6954ec7..f23c4ca9a2e 100644 --- a/drivers/scsi/lasi700.c +++ b/drivers/scsi/lasi700.c @@ -103,7 +103,7 @@ lasi700_probe(struct parisc_device *dev) hostdata = kzalloc(sizeof(*hostdata), GFP_KERNEL); if (!hostdata) { - dev_printk(KERN_ERR, dev, "Failed to allocate host data\n"); + dev_printk(KERN_ERR, &dev->dev, "Failed to allocate host data\n"); return -ENOMEM; } diff --git a/drivers/scsi/zalon.c b/drivers/scsi/zalon.c index a8d61a62522..97f3158fa7b 100644 --- a/drivers/scsi/zalon.c +++ b/drivers/scsi/zalon.c @@ -137,7 +137,7 @@ zalon_probe(struct parisc_device *dev) goto fail; if (request_irq(dev->irq, ncr53c8xx_intr, IRQF_SHARED, "zalon", host)) { - dev_printk(KERN_ERR, dev, "irq problem with %d, detaching\n ", + dev_printk(KERN_ERR, &dev->dev, "irq problem with %d, detaching\n ", dev->irq); goto fail; } -- cgit v1.2.3 From 7a192ec334cab9fafe3a8665a65af398b0e24730 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Fri, 6 Feb 2009 23:40:12 +0800 Subject: platform driver: fix incorrect use of 'platform_bus_type' with 'struct device_driver' This patch fixes the bug reported in http://bugzilla.kernel.org/show_bug.cgi?id=11681. "Lots of device drivers register a 'struct device_driver' with the '.bus' member set to '&platform_bus_type'. This is wrong, since the platform_bus functions expect the 'struct device_driver' to be wrapped up in a 'struct platform_driver' which provides some additional callbacks (like suspend_late, resume_early). The effect may be that platform_suspend_late() uses bogus data outside the device_driver struct as a pointer pointer to the device driver's suspend_late() function or other hard to reproduce failures."(Lothar Wassmann) Signed-off-by: Ming Lei Acked-by: Henrique de Moraes Holschuh Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/scsi/a4000t.c | 26 ++++++++++++++------------ drivers/scsi/bvme6000_scsi.c | 26 ++++++++++++++------------ drivers/scsi/mvme16x_scsi.c | 26 ++++++++++++++------------ 3 files changed, 42 insertions(+), 36 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/a4000t.c b/drivers/scsi/a4000t.c index d4bda201774..6d25aca7b41 100644 --- a/drivers/scsi/a4000t.c +++ b/drivers/scsi/a4000t.c @@ -35,7 +35,7 @@ static struct platform_device *a4000t_scsi_device; #define A4000T_SCSI_ADDR 0xdd0040 -static int __devinit a4000t_probe(struct device *dev) +static int __devinit a4000t_probe(struct platform_device *dev) { struct Scsi_Host *host; struct NCR_700_Host_Parameters *hostdata; @@ -78,7 +78,7 @@ static int __devinit a4000t_probe(struct device *dev) goto out_put_host; } - dev_set_drvdata(dev, host); + platform_set_drvdata(dev, host); scsi_scan_host(host); return 0; @@ -93,9 +93,9 @@ static int __devinit a4000t_probe(struct device *dev) return -ENODEV; } -static __devexit int a4000t_device_remove(struct device *dev) +static __devexit int a4000t_device_remove(struct platform_device *dev) { - struct Scsi_Host *host = dev_get_drvdata(dev); + struct Scsi_Host *host = platform_get_drvdata(dev); struct NCR_700_Host_Parameters *hostdata = shost_priv(host); scsi_remove_host(host); @@ -108,25 +108,27 @@ static __devexit int a4000t_device_remove(struct device *dev) return 0; } -static struct device_driver a4000t_scsi_driver = { - .name = "a4000t-scsi", - .bus = &platform_bus_type, - .probe = a4000t_probe, - .remove = __devexit_p(a4000t_device_remove), +static struct platform_driver a4000t_scsi_driver = { + .driver = { + .name = "a4000t-scsi", + .owner = THIS_MODULE, + }, + .probe = a4000t_probe, + .remove = __devexit_p(a4000t_device_remove), }; static int __init a4000t_scsi_init(void) { int err; - err = driver_register(&a4000t_scsi_driver); + err = platform_driver_register(&a4000t_scsi_driver); if (err) return err; a4000t_scsi_device = platform_device_register_simple("a4000t-scsi", -1, NULL, 0); if (IS_ERR(a4000t_scsi_device)) { - driver_unregister(&a4000t_scsi_driver); + platform_driver_register(&a4000t_scsi_driver); return PTR_ERR(a4000t_scsi_device); } @@ -136,7 +138,7 @@ static int __init a4000t_scsi_init(void) static void __exit a4000t_scsi_exit(void) { platform_device_unregister(a4000t_scsi_device); - driver_unregister(&a4000t_scsi_driver); + platform_driver_unregister(&a4000t_scsi_driver); } module_init(a4000t_scsi_init); diff --git a/drivers/scsi/bvme6000_scsi.c b/drivers/scsi/bvme6000_scsi.c index d858f3d4127..9e9a82b03f2 100644 --- a/drivers/scsi/bvme6000_scsi.c +++ b/drivers/scsi/bvme6000_scsi.c @@ -34,7 +34,7 @@ static struct scsi_host_template bvme6000_scsi_driver_template = { static struct platform_device *bvme6000_scsi_device; static __devinit int -bvme6000_probe(struct device *dev) +bvme6000_probe(struct platform_device *dev) { struct Scsi_Host *host; struct NCR_700_Host_Parameters *hostdata; @@ -73,7 +73,7 @@ bvme6000_probe(struct device *dev) goto out_put_host; } - dev_set_drvdata(dev, host); + platform_set_drvdata(dev, host); scsi_scan_host(host); return 0; @@ -87,9 +87,9 @@ bvme6000_probe(struct device *dev) } static __devexit int -bvme6000_device_remove(struct device *dev) +bvme6000_device_remove(struct platform_device *dev) { - struct Scsi_Host *host = dev_get_drvdata(dev); + struct Scsi_Host *host = platform_get_drvdata(dev); struct NCR_700_Host_Parameters *hostdata = shost_priv(host); scsi_remove_host(host); @@ -100,25 +100,27 @@ bvme6000_device_remove(struct device *dev) return 0; } -static struct device_driver bvme6000_scsi_driver = { - .name = "bvme6000-scsi", - .bus = &platform_bus_type, - .probe = bvme6000_probe, - .remove = __devexit_p(bvme6000_device_remove), +static struct platform_driver bvme6000_scsi_driver = { + .driver = { + .name = "bvme6000-scsi", + .owner = THIS_MODULE, + }, + .probe = bvme6000_probe, + .remove = __devexit_p(bvme6000_device_remove), }; static int __init bvme6000_scsi_init(void) { int err; - err = driver_register(&bvme6000_scsi_driver); + err = platform_driver_register(&bvme6000_scsi_driver); if (err) return err; bvme6000_scsi_device = platform_device_register_simple("bvme6000-scsi", -1, NULL, 0); if (IS_ERR(bvme6000_scsi_device)) { - driver_unregister(&bvme6000_scsi_driver); + platform_driver_unregister(&bvme6000_scsi_driver); return PTR_ERR(bvme6000_scsi_device); } @@ -128,7 +130,7 @@ static int __init bvme6000_scsi_init(void) static void __exit bvme6000_scsi_exit(void) { platform_device_unregister(bvme6000_scsi_device); - driver_unregister(&bvme6000_scsi_driver); + platform_driver_unregister(&bvme6000_scsi_driver); } module_init(bvme6000_scsi_init); diff --git a/drivers/scsi/mvme16x_scsi.c b/drivers/scsi/mvme16x_scsi.c index b264b499d98..7794fc158b1 100644 --- a/drivers/scsi/mvme16x_scsi.c +++ b/drivers/scsi/mvme16x_scsi.c @@ -34,7 +34,7 @@ static struct scsi_host_template mvme16x_scsi_driver_template = { static struct platform_device *mvme16x_scsi_device; static __devinit int -mvme16x_probe(struct device *dev) +mvme16x_probe(struct platform_device *dev) { struct Scsi_Host * host = NULL; struct NCR_700_Host_Parameters *hostdata; @@ -88,7 +88,7 @@ mvme16x_probe(struct device *dev) out_be32(0xfff4202c, v); } - dev_set_drvdata(dev, host); + platform_set_drvdata(dev, host); scsi_scan_host(host); return 0; @@ -102,9 +102,9 @@ mvme16x_probe(struct device *dev) } static __devexit int -mvme16x_device_remove(struct device *dev) +mvme16x_device_remove(struct platform_device *dev) { - struct Scsi_Host *host = dev_get_drvdata(dev); + struct Scsi_Host *host = platform_get_drvdata(dev); struct NCR_700_Host_Parameters *hostdata = shost_priv(host); /* Disable scsi chip ints */ @@ -123,25 +123,27 @@ mvme16x_device_remove(struct device *dev) return 0; } -static struct device_driver mvme16x_scsi_driver = { - .name = "mvme16x-scsi", - .bus = &platform_bus_type, - .probe = mvme16x_probe, - .remove = __devexit_p(mvme16x_device_remove), +static struct platform_driver mvme16x_scsi_driver = { + .driver = { + .name = "mvme16x-scsi", + .owner = THIS_MODULE, + }, + .probe = mvme16x_probe, + .remove = __devexit_p(mvme16x_device_remove), }; static int __init mvme16x_scsi_init(void) { int err; - err = driver_register(&mvme16x_scsi_driver); + err = platform_driver_register(&mvme16x_scsi_driver); if (err) return err; mvme16x_scsi_device = platform_device_register_simple("mvme16x-scsi", -1, NULL, 0); if (IS_ERR(mvme16x_scsi_device)) { - driver_unregister(&mvme16x_scsi_driver); + platform_driver_unregister(&mvme16x_scsi_driver); return PTR_ERR(mvme16x_scsi_device); } @@ -151,7 +153,7 @@ static int __init mvme16x_scsi_init(void) static void __exit mvme16x_scsi_exit(void) { platform_device_unregister(mvme16x_scsi_device); - driver_unregister(&mvme16x_scsi_driver); + platform_driver_unregister(&mvme16x_scsi_driver); } module_init(mvme16x_scsi_init); -- cgit v1.2.3 From e5779a583ddb9916b37cfbb916dc53ec2eaf0b9b Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 11 Mar 2009 09:23:52 +0100 Subject: scsi/m68k: Kill NCR_700_detect() warnings The patch from Ming Lei entitled: platform driver: fix incorrect use of 'platform_bus_type' with 'struct devic introduced the following warnings on m68k, as `dev' is now a `struct platform_device *' instead of a `struct device *': | drivers/scsi/a4000t.c:64: warning: passing argument 3 of 'NCR_700_detect' from incompatible pointer type | drivers/scsi/mvme16x_scsi.c:67: warning: passing argument 3 of 'NCR_700_detect' from incompatible pointer type | drivers/scsi/bvme6000_scsi.c:61: warning: passing argument 3 of 'NCR_700_detect' from incompatible pointer type I think the below is missing (untested on real hardware). Signed-off-by: Geert Uytterhoeven Cc: Ming Lei Signed-off-by: Greg Kroah-Hartman --- drivers/scsi/a4000t.c | 3 ++- drivers/scsi/bvme6000_scsi.c | 3 ++- drivers/scsi/mvme16x_scsi.c | 3 ++- 3 files changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/a4000t.c b/drivers/scsi/a4000t.c index 6d25aca7b41..61af3d91ac8 100644 --- a/drivers/scsi/a4000t.c +++ b/drivers/scsi/a4000t.c @@ -61,7 +61,8 @@ static int __devinit a4000t_probe(struct platform_device *dev) hostdata->dcntl_extra = EA_710; /* and register the chip */ - host = NCR_700_detect(&a4000t_scsi_driver_template, hostdata, dev); + host = NCR_700_detect(&a4000t_scsi_driver_template, hostdata, + &dev->dev); if (!host) { printk(KERN_ERR "a4000t-scsi: No host detected; " "board configuration problem?\n"); diff --git a/drivers/scsi/bvme6000_scsi.c b/drivers/scsi/bvme6000_scsi.c index 9e9a82b03f2..5799cb5cba6 100644 --- a/drivers/scsi/bvme6000_scsi.c +++ b/drivers/scsi/bvme6000_scsi.c @@ -58,7 +58,8 @@ bvme6000_probe(struct platform_device *dev) hostdata->ctest7_extra = CTEST7_TT1; /* and register the chip */ - host = NCR_700_detect(&bvme6000_scsi_driver_template, hostdata, dev); + host = NCR_700_detect(&bvme6000_scsi_driver_template, hostdata, + &dev->dev); if (!host) { printk(KERN_ERR "bvme6000-scsi: No host detected; " "board configuration problem?\n"); diff --git a/drivers/scsi/mvme16x_scsi.c b/drivers/scsi/mvme16x_scsi.c index 7794fc158b1..b5fbfd6ce87 100644 --- a/drivers/scsi/mvme16x_scsi.c +++ b/drivers/scsi/mvme16x_scsi.c @@ -64,7 +64,8 @@ mvme16x_probe(struct platform_device *dev) hostdata->ctest7_extra = CTEST7_TT1; /* and register the chip */ - host = NCR_700_detect(&mvme16x_scsi_driver_template, hostdata, dev); + host = NCR_700_detect(&mvme16x_scsi_driver_template, hostdata, + &dev->dev); if (!host) { printk(KERN_ERR "mvme16x-scsi: No host detected; " "board configuration problem?\n"); -- cgit v1.2.3