From f0c0a376d0fcd4c5579ecf5e95f88387cba85211 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Sun, 17 Aug 2008 15:24:38 -0500 Subject: [SCSI] Add helper code so transport classes/driver can control queueing (v3) SCSI-ml manages the queueing limits for the device and host, but does not do so at the target level. However something something similar can come in userful when a driver is transitioning a transport object to the the blocked state, becuase at that time we do not want to queue io and we do not want the queuecommand to be called again. The patch adds code similar to the exisiting SCSI_ML_*BUSY handlers. You can now return SCSI_MLQUEUE_TARGET_BUSY when we hit a transport level queueing issue like the hw cannot allocate some resource at the iscsi session/connection level, or the target has temporarily closed or shrunk the queueing window, or if we are transitioning to the blocked state. bnx2i, when they rework their firmware according to netdev developers requests, will also need to be able to limit queueing at this level. bnx2i will hook into libiscsi, but will allocate a scsi host per netdevice/hba, so unlike pure software iscsi/iser which is allocating a host per session, it cannot set the scsi_host->can_queue and return SCSI_MLQUEUE_HOST_BUSY to reflect queueing limits on the transport. The iscsi class/driver can also set a scsi_target->can_queue value which reflects the max commands the driver/class can support. For iscsi this reflects the number of commands we can support for each session due to session/connection hw limits, driver limits, and to also reflect the session/targets's queueing window. Changes: v1 - initial patch. v2 - Fix scsi_run_queue handling of multiple blocked targets. Previously we would break from the main loop if a device was added back on the starved list. We now run over the list and check if any target is blocked. v3 - Rediff for scsi-misc. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/scsi.c | 10 ++++- drivers/scsi/scsi_lib.c | 104 +++++++++++++++++++++++++++++++++++++++-------- drivers/scsi/scsi_scan.c | 1 + 3 files changed, 97 insertions(+), 18 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 2ac3cb2b908..f8b79d401d5 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -754,8 +754,12 @@ int scsi_dispatch_cmd(struct scsi_cmnd *cmd) } spin_unlock_irqrestore(host->host_lock, flags); if (rtn) { - scsi_queue_insert(cmd, (rtn == SCSI_MLQUEUE_DEVICE_BUSY) ? - rtn : SCSI_MLQUEUE_HOST_BUSY); + if (rtn != SCSI_MLQUEUE_DEVICE_BUSY && + rtn != SCSI_MLQUEUE_TARGET_BUSY) + rtn = SCSI_MLQUEUE_HOST_BUSY; + + scsi_queue_insert(cmd, rtn); + SCSI_LOG_MLQUEUE(3, printk("queuecommand : request rejected\n")); } @@ -800,6 +804,7 @@ static struct scsi_driver *scsi_cmd_to_driver(struct scsi_cmnd *cmd) void scsi_finish_command(struct scsi_cmnd *cmd) { struct scsi_device *sdev = cmd->device; + struct scsi_target *starget = scsi_target(sdev); struct Scsi_Host *shost = sdev->host; struct scsi_driver *drv; unsigned int good_bytes; @@ -815,6 +820,7 @@ void scsi_finish_command(struct scsi_cmnd *cmd) * XXX(hch): What about locking? */ shost->host_blocked = 0; + starget->target_blocked = 0; sdev->device_blocked = 0; /* diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 98ee55ced59..91c74c55aa5 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -114,6 +114,7 @@ int scsi_queue_insert(struct scsi_cmnd *cmd, int reason) { struct Scsi_Host *host = cmd->device->host; struct scsi_device *device = cmd->device; + struct scsi_target *starget = scsi_target(device); struct request_queue *q = device->request_queue; unsigned long flags; @@ -133,10 +134,17 @@ int scsi_queue_insert(struct scsi_cmnd *cmd, int reason) * if a command is requeued with no other commands outstanding * either for the device or for the host. */ - if (reason == SCSI_MLQUEUE_HOST_BUSY) + switch (reason) { + case SCSI_MLQUEUE_HOST_BUSY: host->host_blocked = host->max_host_blocked; - else if (reason == SCSI_MLQUEUE_DEVICE_BUSY) + break; + case SCSI_MLQUEUE_DEVICE_BUSY: device->device_blocked = device->max_device_blocked; + break; + case SCSI_MLQUEUE_TARGET_BUSY: + starget->target_blocked = starget->max_target_blocked; + break; + } /* * Decrement the counters, since these commands are no longer @@ -460,10 +468,12 @@ static void scsi_init_cmd_errh(struct scsi_cmnd *cmd) void scsi_device_unbusy(struct scsi_device *sdev) { struct Scsi_Host *shost = sdev->host; + struct scsi_target *starget = scsi_target(sdev); unsigned long flags; spin_lock_irqsave(shost->host_lock, flags); shost->host_busy--; + starget->target_busy--; if (unlikely(scsi_host_in_recovery(shost) && (shost->host_failed || shost->host_eh_scheduled))) scsi_eh_wakeup(shost); @@ -519,6 +529,13 @@ static void scsi_single_lun_run(struct scsi_device *current_sdev) spin_unlock_irqrestore(shost->host_lock, flags); } +static inline int scsi_target_is_busy(struct scsi_target *starget) +{ + return ((starget->can_queue > 0 && + starget->target_busy >= starget->can_queue) || + starget->target_blocked); +} + /* * Function: scsi_run_queue() * @@ -533,7 +550,7 @@ static void scsi_single_lun_run(struct scsi_device *current_sdev) */ static void scsi_run_queue(struct request_queue *q) { - struct scsi_device *sdev = q->queuedata; + struct scsi_device *starved_head = NULL, *sdev = q->queuedata; struct Scsi_Host *shost = sdev->host; unsigned long flags; @@ -560,6 +577,21 @@ static void scsi_run_queue(struct request_queue *q) */ sdev = list_entry(shost->starved_list.next, struct scsi_device, starved_entry); + /* + * The *queue_ready functions can add a device back onto the + * starved list's tail, so we must check for a infinite loop. + */ + if (sdev == starved_head) + break; + if (!starved_head) + starved_head = sdev; + + if (scsi_target_is_busy(scsi_target(sdev))) { + list_move_tail(&sdev->starved_entry, + &shost->starved_list); + continue; + } + list_del_init(&sdev->starved_entry); spin_unlock(shost->host_lock); @@ -575,13 +607,6 @@ static void scsi_run_queue(struct request_queue *q) spin_unlock(sdev->request_queue->queue_lock); spin_lock(shost->host_lock); - if (unlikely(!list_empty(&sdev->starved_entry))) - /* - * sdev lost a race, and was put back on the - * starved list. This is unlikely but without this - * in theory we could loop forever. - */ - break; } spin_unlock_irqrestore(shost->host_lock, flags); @@ -1344,6 +1369,52 @@ static inline int scsi_dev_queue_ready(struct request_queue *q, return 1; } + +/* + * scsi_target_queue_ready: checks if there we can send commands to target + * @sdev: scsi device on starget to check. + * + * Called with the host lock held. + */ +static inline int scsi_target_queue_ready(struct Scsi_Host *shost, + struct scsi_device *sdev) +{ + struct scsi_target *starget = scsi_target(sdev); + + if (starget->single_lun) { + if (starget->starget_sdev_user && + starget->starget_sdev_user != sdev) + return 0; + starget->starget_sdev_user = sdev; + } + + if (starget->target_busy == 0 && starget->target_blocked) { + /* + * unblock after target_blocked iterates to zero + */ + if (--starget->target_blocked == 0) { + SCSI_LOG_MLQUEUE(3, starget_printk(KERN_INFO, starget, + "unblocking target at zero depth\n")); + } else { + blk_plug_device(sdev->request_queue); + return 0; + } + } + + if (scsi_target_is_busy(starget)) { + if (list_empty(&sdev->starved_entry)) { + list_add_tail(&sdev->starved_entry, + &shost->starved_list); + return 0; + } + } + + /* We're OK to process the command, so we can't be starved */ + if (!list_empty(&sdev->starved_entry)) + list_del_init(&sdev->starved_entry); + return 1; +} + /* * scsi_host_queue_ready: if we can send requests to shost, return 1 else * return 0. We must end up running the queue again whenever 0 is @@ -1390,6 +1461,7 @@ static void scsi_kill_request(struct request *req, struct request_queue *q) { struct scsi_cmnd *cmd = req->special; struct scsi_device *sdev = cmd->device; + struct scsi_target *starget = scsi_target(sdev); struct Scsi_Host *shost = sdev->host; blkdev_dequeue_request(req); @@ -1413,6 +1485,7 @@ static void scsi_kill_request(struct request *req, struct request_queue *q) spin_unlock(sdev->request_queue->queue_lock); spin_lock(shost->host_lock); shost->host_busy++; + starget->target_busy++; spin_unlock(shost->host_lock); spin_lock(sdev->request_queue->queue_lock); @@ -1550,14 +1623,13 @@ static void scsi_request_fn(struct request_queue *q) goto not_ready; } + if (!scsi_target_queue_ready(shost, sdev)) + goto not_ready; + if (!scsi_host_queue_ready(q, shost, sdev)) goto not_ready; - if (scsi_target(sdev)->single_lun) { - if (scsi_target(sdev)->starget_sdev_user && - scsi_target(sdev)->starget_sdev_user != sdev) - goto not_ready; - scsi_target(sdev)->starget_sdev_user = sdev; - } + + scsi_target(sdev)->target_busy++; shost->host_busy++; /* diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 334862e26a1..b14dc02c3de 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -419,6 +419,7 @@ static struct scsi_target *scsi_alloc_target(struct device *parent, dev->type = &scsi_target_type; starget->id = id; starget->channel = channel; + starget->can_queue = 0; INIT_LIST_HEAD(&starget->siblings); INIT_LIST_HEAD(&starget->devices); starget->state = STARGET_CREATED; -- cgit v1.2.3 From c5e98e912c5423a0ec2eed7aa1064578d44f8a8e Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Sun, 17 Aug 2008 15:24:39 -0500 Subject: [SCSI] qla4xxx: return SCSI_MLQUEUE_TARGET_BUSY when driver has detected session error When qla4xxx begins recovery and the iscsi class is firing up to handle it, we need to retrn SCSI_MLQUEUE_TARGET_BUSY from the driver instead of host busy, because the session recovery only affects the one target. Signed-off-by: Mike Christie Acked-by: David C Somayajulu Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_os.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index de8279ad7d8..4255b36ff96 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -439,7 +439,7 @@ static int qla4xxx_queuecommand(struct scsi_cmnd *cmd, cmd->result = DID_NO_CONNECT << 16; goto qc_fail_command; } - goto qc_host_busy; + return SCSI_MLQUEUE_TARGET_BUSY; } if (test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags)) -- cgit v1.2.3 From 7b594131c4f38edeb13d8c6c0147949173c47013 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Sun, 17 Aug 2008 15:24:40 -0500 Subject: [SCSI] qla2xxx: return SCSI_MLQUEUE_TARGET_BUSY when driver has detected rport error or race If the fcport is not online then we do not want to block IO to all ports on the host. We just want to stop IO on port not online, so we should be using the SCSI_MLQUEUE_TARGET_BUSY return value. For the case where we race with the rport memset initialization we do not want the queuecommand to be called again so we can just use SCSI_MLQUEUE_TARGET_BUSY for this. Signed-off-by: Mike Christie Acked-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_os.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 3433441b956..2aed4721c0d 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -394,10 +394,8 @@ qla2x00_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) } /* Close window on fcport/rport state-transitioning. */ - if (fcport->drport) { - cmd->result = DID_IMM_RETRY << 16; - goto qc_fail_command; - } + if (fcport->drport) + goto qc_target_busy; if (atomic_read(&fcport->state) != FCS_ONLINE) { if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD || @@ -405,7 +403,7 @@ qla2x00_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) cmd->result = DID_NO_CONNECT << 16; goto qc_fail_command; } - goto qc_host_busy; + goto qc_target_busy; } spin_unlock_irq(ha->host->host_lock); @@ -428,10 +426,11 @@ qc_host_busy_free_sp: qc_host_busy_lock: spin_lock_irq(ha->host->host_lock); - -qc_host_busy: return SCSI_MLQUEUE_HOST_BUSY; +qc_target_busy: + return SCSI_MLQUEUE_TARGET_BUSY; + qc_fail_command: done(cmd); @@ -461,10 +460,8 @@ qla24xx_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) } /* Close window on fcport/rport state-transitioning. */ - if (fcport->drport) { - cmd->result = DID_IMM_RETRY << 16; - goto qc24_fail_command; - } + if (fcport->drport) + goto qc24_target_busy; if (atomic_read(&fcport->state) != FCS_ONLINE) { if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD || @@ -472,7 +469,7 @@ qla24xx_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) cmd->result = DID_NO_CONNECT << 16; goto qc24_fail_command; } - goto qc24_host_busy; + goto qc24_target_busy; } spin_unlock_irq(ha->host->host_lock); @@ -495,10 +492,11 @@ qc24_host_busy_free_sp: qc24_host_busy_lock: spin_lock_irq(ha->host->host_lock); - -qc24_host_busy: return SCSI_MLQUEUE_HOST_BUSY; +qc24_target_busy: + return SCSI_MLQUEUE_TARGET_BUSY; + qc24_fail_command: done(cmd); -- cgit v1.2.3 From d6d13ee19da6d291c99f980dcb76f6b7dc676804 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Sun, 17 Aug 2008 15:24:43 -0500 Subject: [SCSI] libiscsi: Use SCSI_MLQUEUE_TARGET_BUSY For the conditions below we do not want the queuecommand function to call us right back, so return SCSI_MLQUEUE_TARGET_BUSY. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/libiscsi.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index da7b67d30d9..521dbf7e521 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1194,12 +1194,10 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) switch (session->state) { case ISCSI_STATE_IN_RECOVERY: reason = FAILURE_SESSION_IN_RECOVERY; - sc->result = DID_IMM_RETRY << 16; - break; + goto reject; case ISCSI_STATE_LOGGING_OUT: reason = FAILURE_SESSION_LOGGING_OUT; - sc->result = DID_IMM_RETRY << 16; - break; + goto reject; case ISCSI_STATE_RECOVERY_FAILED: reason = FAILURE_SESSION_RECOVERY_TIMEOUT; sc->result = DID_NO_CONNECT << 16; @@ -1267,7 +1265,7 @@ reject: spin_unlock(&session->lock); debug_scsi("cmd 0x%x rejected (%d)\n", sc->cmnd[0], reason); spin_lock(host->host_lock); - return SCSI_MLQUEUE_HOST_BUSY; + return SCSI_MLQUEUE_TARGET_BUSY; fault: spin_unlock(&session->lock); -- cgit v1.2.3 From a93ce0244f2e94dd48e0b4a2742a4e3bf196ab53 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Sun, 17 Aug 2008 15:24:41 -0500 Subject: [SCSI] lpfc: use SCSI_MLQUEUE_TARGET_BUSY when catching the rport transition race We do want to call right back into the queuecommand during the race, so we can just use SCSI_MLQUEUE_TARGET_BUSY. Signed-off-by: Mike Christie Acked-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_scsi.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 1bcebbd3dfa..a22bdf9548a 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -966,10 +966,9 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) * Catch race where our node has transitioned, but the * transport is still transitioning. */ - if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) { - cmnd->result = ScsiResult(DID_BUS_BUSY, 0); - goto out_fail_command; - } + if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) + goto out_target_busy; + lpfc_cmd = lpfc_get_scsi_buf(phba); if (lpfc_cmd == NULL) { lpfc_adjust_queue_depth(phba); @@ -1014,6 +1013,8 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) lpfc_release_scsi_buf(phba, lpfc_cmd); out_host_busy: return SCSI_MLQUEUE_HOST_BUSY; + out_target_busy: + return SCSI_MLQUEUE_TARGET_BUSY; out_fail_command: done(cmnd); -- cgit v1.2.3 From fff9d40ce0eb4b46f3e186823ceab6bc02c3e5d3 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Tue, 19 Aug 2008 18:45:23 -0500 Subject: [SCSI] fc class: unblock target after calling terminate callback (take 2) When we block a rport and the driver implements the terminate callback we will fail IO that was running quickly. However IO that was in the scsi_device/block queue sits there until the dev_loss_tmo fires, and this can make it look like IO is lost because new IO will get executed but that IO stuck in the blocked queue sits there for some time longer. With this patch when the fast io fail tmo fires, we will fail the blocked IO and any new IO. This patch also allows all drivers to partially support the fast io fail tmo. If the terminate io callback is not implemented, we will still fail blocked IO and any new IO, so multipath can handle that. This patch also allows the fc and iscsi classes to implement the same behavior. The timers are just unfornately named differently. This patch also fixes the problem where drivers were unblocking the target in their terminate callback, which was needed for rport removal, but for fast io fail timeout it would cause IO to bounce arround the scsi/block layer and the LLD queuecommand. And it for drivers that could have IO stuck but did not have a terminate callback the unblock calls in the class will fix them. v2. - fix up bit setting style to meet JamesS's pref. - Broke out new host byte error changes to make it easier to read. - added JamesS's ack from list. v1 - initial patch Signed-off-by: Mike Christie Acked-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_fc.c | 47 ++++++++++++++++++++++++---------------- 1 file changed, 28 insertions(+), 19 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index d5f7653bb94..1e71abf0607 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -2133,8 +2133,7 @@ fc_attach_transport(struct fc_function_template *ft) SETUP_PRIVATE_RPORT_ATTRIBUTE_RD(roles); SETUP_PRIVATE_RPORT_ATTRIBUTE_RD(port_state); SETUP_PRIVATE_RPORT_ATTRIBUTE_RD(scsi_target_id); - if (ft->terminate_rport_io) - SETUP_PRIVATE_RPORT_ATTRIBUTE_RW(fast_io_fail_tmo); + SETUP_PRIVATE_RPORT_ATTRIBUTE_RW(fast_io_fail_tmo); BUG_ON(count > FC_RPORT_NUM_ATTRS); @@ -2328,6 +2327,22 @@ fc_remove_host(struct Scsi_Host *shost) } EXPORT_SYMBOL(fc_remove_host); +static void fc_terminate_rport_io(struct fc_rport *rport) +{ + struct Scsi_Host *shost = rport_to_shost(rport); + struct fc_internal *i = to_fc_internal(shost->transportt); + + /* Involve the LLDD if possible to terminate all io on the rport. */ + if (i->f->terminate_rport_io) + i->f->terminate_rport_io(rport); + + /* + * must unblock to flush queued IO. The caller will have set + * the port_state or flags, so that fc_remote_port_chkready will + * fail IO. + */ + scsi_target_unblock(&rport->dev); +} /** * fc_starget_delete - called to delete the scsi decendents of an rport @@ -2340,13 +2355,8 @@ fc_starget_delete(struct work_struct *work) { struct fc_rport *rport = container_of(work, struct fc_rport, stgt_delete_work); - struct Scsi_Host *shost = rport_to_shost(rport); - struct fc_internal *i = to_fc_internal(shost->transportt); - - /* Involve the LLDD if possible to terminate all io on the rport. */ - if (i->f->terminate_rport_io) - i->f->terminate_rport_io(rport); + fc_terminate_rport_io(rport); scsi_remove_target(&rport->dev); } @@ -2372,10 +2382,7 @@ fc_rport_final_delete(struct work_struct *work) if (rport->flags & FC_RPORT_SCAN_PENDING) scsi_flush_work(shost); - /* involve the LLDD to terminate all pending i/o */ - if (i->f->terminate_rport_io) - i->f->terminate_rport_io(rport); - + fc_terminate_rport_io(rport); /* * Cancel any outstanding timers. These should really exist * only when rmmod'ing the LLDD and we're asking for @@ -2639,7 +2646,8 @@ fc_remote_port_add(struct Scsi_Host *shost, int channel, spin_lock_irqsave(shost->host_lock, flags); - rport->flags &= ~FC_RPORT_DEVLOSS_PENDING; + rport->flags &= ~(FC_RPORT_FAST_FAIL_TIMEDOUT | + FC_RPORT_DEVLOSS_PENDING); /* if target, initiate a scan */ if (rport->scsi_target_id != -1) { @@ -2702,6 +2710,7 @@ fc_remote_port_add(struct Scsi_Host *shost, int channel, rport->port_id = ids->port_id; rport->roles = ids->roles; rport->port_state = FC_PORTSTATE_ONLINE; + rport->flags &= ~FC_RPORT_FAST_FAIL_TIMEDOUT; if (fci->f->dd_fcrport_size) memset(rport->dd_data, 0, @@ -2784,7 +2793,6 @@ void fc_remote_port_delete(struct fc_rport *rport) { struct Scsi_Host *shost = rport_to_shost(rport); - struct fc_internal *i = to_fc_internal(shost->transportt); int timeout = rport->dev_loss_tmo; unsigned long flags; @@ -2830,7 +2838,7 @@ fc_remote_port_delete(struct fc_rport *rport) /* see if we need to kill io faster than waiting for device loss */ if ((rport->fast_io_fail_tmo != -1) && - (rport->fast_io_fail_tmo < timeout) && (i->f->terminate_rport_io)) + (rport->fast_io_fail_tmo < timeout)) fc_queue_devloss_work(shost, &rport->fail_io_work, rport->fast_io_fail_tmo * HZ); @@ -2906,7 +2914,8 @@ fc_remote_port_rolechg(struct fc_rport *rport, u32 roles) fc_flush_devloss(shost); spin_lock_irqsave(shost->host_lock, flags); - rport->flags &= ~FC_RPORT_DEVLOSS_PENDING; + rport->flags &= ~(FC_RPORT_FAST_FAIL_TIMEDOUT | + FC_RPORT_DEVLOSS_PENDING); spin_unlock_irqrestore(shost->host_lock, flags); /* ensure any stgt delete functions are done */ @@ -3001,6 +3010,7 @@ fc_timeout_deleted_rport(struct work_struct *work) rport->supported_classes = FC_COS_UNSPECIFIED; rport->roles = FC_PORT_ROLE_UNKNOWN; rport->port_state = FC_PORTSTATE_NOTPRESENT; + rport->flags &= ~FC_RPORT_FAST_FAIL_TIMEDOUT; /* remove the identifiers that aren't used in the consisting binding */ switch (fc_host->tgtid_bind_type) { @@ -3043,13 +3053,12 @@ fc_timeout_fail_rport_io(struct work_struct *work) { struct fc_rport *rport = container_of(work, struct fc_rport, fail_io_work.work); - struct Scsi_Host *shost = rport_to_shost(rport); - struct fc_internal *i = to_fc_internal(shost->transportt); if (rport->port_state != FC_PORTSTATE_BLOCKED) return; - i->f->terminate_rport_io(rport); + rport->flags |= FC_RPORT_FAST_FAIL_TIMEDOUT; + fc_terminate_rport_io(rport); } /** -- cgit v1.2.3 From 9cc328f502eacfcc52ab1c1bf9a7729cf12f14be Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Tue, 19 Aug 2008 18:45:24 -0500 Subject: [SCSI] ibmvfc, qla2xxx, lpfc: remove scsi_target_unblock calls in terminate callbacks The fc class now calls scsi_target_unblock after calling the terminate callback, so this patch removes the calls from the drivers. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/ibmvscsi/ibmvfc.c | 2 -- drivers/scsi/lpfc/lpfc_hbadisc.c | 8 -------- drivers/scsi/qla2xxx/qla_attr.c | 1 - 3 files changed, 11 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c index 4e0b7c8eb32..7650707a40d 100644 --- a/drivers/scsi/ibmvscsi/ibmvfc.c +++ b/drivers/scsi/ibmvscsi/ibmvfc.c @@ -2031,8 +2031,6 @@ static void ibmvfc_terminate_rport_io(struct fc_rport *rport) spin_unlock_irqrestore(shost->host_lock, flags); } else ibmvfc_issue_fc_host_lip(shost); - - scsi_target_unblock(&rport->dev); LEAVE; } diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index a98d11bf357..aaf398e5c93 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -88,14 +88,6 @@ lpfc_terminate_rport_io(struct fc_rport *rport) &phba->sli.ring[phba->sli.fcp_ring], ndlp->nlp_sid, 0, LPFC_CTX_TGT); } - - /* - * A device is normally blocked for rediscovery and unblocked when - * devloss timeout happens. In case a vport is removed or driver - * unloaded before devloss timeout happens, we need to unblock here. - */ - scsi_target_unblock(&rport->dev); - return; } /* diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 0ddfe7106b3..ed731968f15 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -1006,7 +1006,6 @@ qla2x00_terminate_rport_io(struct fc_rport *rport) } qla2x00_abort_fcport_cmds(fcport); - scsi_target_unblock(&rport->dev); } static int -- cgit v1.2.3 From a4dfaa6f2e55b736adf2719133996f7e7dc309bc Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Tue, 19 Aug 2008 18:45:25 -0500 Subject: [SCSI] scsi: add transport host byte errors (v3) Currently, if there is a transport problem the iscsi drivers will return outstanding commands (commands being exeucted by the driver/fw/hw) with DID_BUS_BUSY and block the session so no new commands can be queued. Commands that are caught between the failure handling and blocking are failed with DID_IMM_RETRY or one of the scsi ml queuecommand return values. When the recovery_timeout fires, the iscsi drivers then fail IO with DID_NO_CONNECT. For fcp, some drivers will fail some outstanding IO (disk but possibly not tape) with DID_BUS_BUSY or DID_ERROR or some other value that causes a retry and hits the scsi_error.c failfast check, block the rport, and commands caught in the race are failed with DID_IMM_RETRY. Other drivers, may hold onto all IO and wait for the terminate_rport_io or dev_loss_tmo_callbk to be called. The following patches attempt to unify what upper layers will see drivers like multipath can make a good guess. This relies on drivers being hooked into their transport class. This first patch just defines two new host byte errors so drivers can return the same value for when a rport/session is blocked and for when the fast_io_fail_tmo fires. The idea is that if the LLD/class detects a problem and is going to block a rport/session, then if the LLD wants or must return the command to scsi-ml, then it can return it with DID_TRANSPORT_DISRUPTED. This will requeue the IO into the same scsi queue it came from, until the fast io fail timer fires and the class decides what to do. When using multipath and the fast_io_fail_tmo fires then the class can fail commands with DID_TRANSPORT_FAILFAST or drivers can use DID_TRANSPORT_FAILFAST in their terminate_rport_io callbacks or the equivlent in iscsi if we ever implement more advanced recovery methods. A LLD, like lpfc, could continue to return DID_ERROR and then it will hit the normal failfast path, so drivers do not have fully be ported to work better. The point of the patches is that upper layers will not see a failure that could be recovered from while the rport/session is blocked until fast_io_fail_tmo/recovery_timeout fires. V3 Remove some comments. V2 Fixed patch/diff errors and renamed DID_TRANSPORT_BLOCKED to DID_TRANSPORT_DISRUPTED. V1 initial patch. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/constants.c | 3 ++- drivers/scsi/scsi_error.c | 15 ++++++++++++++- 2 files changed, 16 insertions(+), 2 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c index 9785d738419..4003deefb7d 100644 --- a/drivers/scsi/constants.c +++ b/drivers/scsi/constants.c @@ -1364,7 +1364,8 @@ EXPORT_SYMBOL(scsi_print_sense); static const char * const hostbyte_table[]={ "DID_OK", "DID_NO_CONNECT", "DID_BUS_BUSY", "DID_TIME_OUT", "DID_BAD_TARGET", "DID_ABORT", "DID_PARITY", "DID_ERROR", "DID_RESET", "DID_BAD_INTR", -"DID_PASSTHROUGH", "DID_SOFT_ERROR", "DID_IMM_RETRY", "DID_REQUEUE"}; +"DID_PASSTHROUGH", "DID_SOFT_ERROR", "DID_IMM_RETRY", "DID_REQUEUE", +"DID_TRANSPORT_DISRUPTED", "DID_TRANSPORT_FAILFAST" }; #define NUM_HOSTBYTE_STRS ARRAY_SIZE(hostbyte_table) static const char * const driverbyte_table[]={ diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index fecefa05cb6..5bf8be21a16 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -1290,7 +1290,20 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd) case DID_REQUEUE: return ADD_TO_MLQUEUE; - + case DID_TRANSPORT_DISRUPTED: + /* + * LLD/transport was disrupted during processing of the IO. + * The transport class is now blocked/blocking, + * and the transport will decide what to do with the IO + * based on its timers and recovery capablilities. + */ + return ADD_TO_MLQUEUE; + case DID_TRANSPORT_FAILFAST: + /* + * The transport decided to failfast the IO (most likely + * the fast io fail tmo fired), so send IO directly upwards. + */ + return SUCCESS; case DID_ERROR: if (msg_byte(scmd->result) == COMMAND_COMPLETE && status_byte(scmd->result) == RESERVATION_CONFLICT) -- cgit v1.2.3 From 56d7fcfa815564b40a1b0ec7a30ea8cb3bc0713e Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Tue, 19 Aug 2008 18:45:26 -0500 Subject: [SCSI] iscsi class, libiscsi and qla4xxx: convert to new transport host byte values This patch converts the iscsi drivers to the new host byte values. v2 Drop some conversions. Want to avoid conflicts with other patches. v1 initial patch. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/libiscsi.c | 8 +++++--- drivers/scsi/qla4xxx/ql4_isr.c | 4 ++-- drivers/scsi/scsi_transport_iscsi.c | 4 ++-- 3 files changed, 9 insertions(+), 7 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 521dbf7e521..0e8f26baca6 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1200,7 +1200,7 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) goto reject; case ISCSI_STATE_RECOVERY_FAILED: reason = FAILURE_SESSION_RECOVERY_TIMEOUT; - sc->result = DID_NO_CONNECT << 16; + sc->result = DID_TRANSPORT_FAILFAST << 16; break; case ISCSI_STATE_TERMINATE: reason = FAILURE_SESSION_TERMINATE; @@ -2333,8 +2333,10 @@ static void iscsi_start_session_recovery(struct iscsi_session *session, * flush queues. */ spin_lock_bh(&session->lock); - fail_all_commands(conn, -1, - STOP_CONN_RECOVER ? DID_BUS_BUSY : DID_ERROR); + if (STOP_CONN_RECOVER) + fail_all_commands(conn, -1, DID_TRANSPORT_DISRUPTED); + else + fail_all_commands(conn, -1, DID_ERROR); flush_control_queues(session, conn); spin_unlock_bh(&session->lock); mutex_unlock(&session->eh_mutex); diff --git a/drivers/scsi/qla4xxx/ql4_isr.c b/drivers/scsi/qla4xxx/ql4_isr.c index a91a57c57bf..799120fcb9b 100644 --- a/drivers/scsi/qla4xxx/ql4_isr.c +++ b/drivers/scsi/qla4xxx/ql4_isr.c @@ -139,7 +139,7 @@ static void qla4xxx_status_entry(struct scsi_qla_host *ha, ha->host_no, cmd->device->channel, cmd->device->id, cmd->device->lun)); - cmd->result = DID_BUS_BUSY << 16; + cmd->result = DID_TRANSPORT_DISRUPTED << 16; /* * Mark device missing so that we won't continue to send @@ -243,7 +243,7 @@ static void qla4xxx_status_entry(struct scsi_qla_host *ha, if (atomic_read(&ddb_entry->state) == DDB_STATE_ONLINE) qla4xxx_mark_device_missing(ha, ddb_entry); - cmd->result = DID_BUS_BUSY << 16; + cmd->result = DID_TRANSPORT_DISRUPTED << 16; break; case SCS_QUEUE_FULL: diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 0ce5f7cdfe2..cbaae48f47e 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -374,10 +374,10 @@ int iscsi_session_chkready(struct iscsi_cls_session *session) err = 0; break; case ISCSI_SESSION_FAILED: - err = DID_IMM_RETRY << 16; + err = DID_TRANSPORT_DISRUPTED << 16; break; case ISCSI_SESSION_FREE: - err = DID_NO_CONNECT << 16; + err = DID_TRANSPORT_FAILFAST << 16; break; default: err = DID_NO_CONNECT << 16; -- cgit v1.2.3 From 056a44834950ffa51fafa6c76a720fa32e86851a Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Tue, 19 Aug 2008 18:45:29 -0500 Subject: [SCSI] qla2xxx: use new host byte transport errors. This has qla2xxx use the new transport error values instead of DID_BUS_BUSY. I am not sure if all the errors in qla_isr.c I changed are transport related. We end up blocking/deleting the rport for all of them so it is better to use the new transport error since the fc classs will decide when to fail the IO. With this patch if I pull a cable then IO that had reached the driver, will be failed with DID_TRANSPORT_DISRUPTED (not including tape). The fc class will then fail the IO when the fast io fail tmo has fired, and the driver will flush any other commands running. Signed-off-by: Mike Christie Cc: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_isr.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index fc4bfa7f839..a76efd99d00 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -1187,7 +1187,12 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt) cp->serial_number, comp_status, atomic_read(&fcport->state))); - cp->result = DID_BUS_BUSY << 16; + /* + * We are going to have the fc class block the rport + * while we try to recover so instruct the mid layer + * to requeue until the class decides how to handle this. + */ + cp->result = DID_TRANSPORT_DISRUPTED << 16; if (atomic_read(&fcport->state) == FCS_ONLINE) qla2x00_mark_device_lost(fcport->ha, fcport, 1, 1); break; @@ -1214,7 +1219,12 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt) break; case CS_TIMEOUT: - cp->result = DID_BUS_BUSY << 16; + /* + * We are going to have the fc class block the rport + * while we try to recover so instruct the mid layer + * to requeue until the class decides how to handle this. + */ + cp->result = DID_TRANSPORT_DISRUPTED << 16; if (IS_FWI2_CAPABLE(ha)) { DEBUG2(printk(KERN_INFO -- cgit v1.2.3 From 6000a368cd8e6da1caf101411bdb494cd6fb8b09 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Tue, 19 Aug 2008 18:45:30 -0500 Subject: [SCSI] block: separate failfast into multiple bits. Multipath is best at handling transport errors. If it gets a device error then there is not much the multipath layer can do. It will just access the same device but from a different path. This patch breaks up failfast into device, transport and driver errors. The multipath layers (md and dm mutlipath) only ask the lower levels to fast fail transport errors. The user of failfast, read ahead, will ask to fast fail on all errors. Note that blk_noretry_request will return true if any failfast bit is set. This allows drivers that do not support the multipath failfast bits to continue to fail on any failfast error like before. Drivers like scsi that are able to fail fast specific errors can check for the specific fail fast type. In the next patch I will convert scsi. Signed-off-by: Mike Christie Cc: Jens Axboe Signed-off-by: James Bottomley --- drivers/scsi/device_handler/scsi_dh_alua.c | 3 ++- drivers/scsi/device_handler/scsi_dh_emc.c | 3 ++- drivers/scsi/device_handler/scsi_dh_hp_sw.c | 6 ++++-- drivers/scsi/device_handler/scsi_dh_rdac.c | 3 ++- drivers/scsi/scsi_transport_spi.c | 4 +++- 5 files changed, 13 insertions(+), 6 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c index 708e475896b..cb8aa3b58c2 100644 --- a/drivers/scsi/device_handler/scsi_dh_alua.c +++ b/drivers/scsi/device_handler/scsi_dh_alua.c @@ -109,7 +109,8 @@ static struct request *get_alua_req(struct scsi_device *sdev, } rq->cmd_type = REQ_TYPE_BLOCK_PC; - rq->cmd_flags |= REQ_FAILFAST | REQ_NOMERGE; + rq->cmd_flags |= REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | + REQ_FAILFAST_DRIVER | REQ_NOMERGE; rq->retries = ALUA_FAILOVER_RETRIES; rq->timeout = ALUA_FAILOVER_TIMEOUT; diff --git a/drivers/scsi/device_handler/scsi_dh_emc.c b/drivers/scsi/device_handler/scsi_dh_emc.c index 8f45570a8a0..0e572d2c5b0 100644 --- a/drivers/scsi/device_handler/scsi_dh_emc.c +++ b/drivers/scsi/device_handler/scsi_dh_emc.c @@ -303,7 +303,8 @@ static struct request *get_req(struct scsi_device *sdev, int cmd, rq->cmd[4] = len; rq->cmd_type = REQ_TYPE_BLOCK_PC; - rq->cmd_flags |= REQ_FAILFAST; + rq->cmd_flags |= REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | + REQ_FAILFAST_DRIVER; rq->timeout = CLARIION_TIMEOUT; rq->retries = CLARIION_RETRIES; diff --git a/drivers/scsi/device_handler/scsi_dh_hp_sw.c b/drivers/scsi/device_handler/scsi_dh_hp_sw.c index 5e93c88ad66..9aec4ca64e5 100644 --- a/drivers/scsi/device_handler/scsi_dh_hp_sw.c +++ b/drivers/scsi/device_handler/scsi_dh_hp_sw.c @@ -112,7 +112,8 @@ static int hp_sw_tur(struct scsi_device *sdev, struct hp_sw_dh_data *h) return SCSI_DH_RES_TEMP_UNAVAIL; req->cmd_type = REQ_TYPE_BLOCK_PC; - req->cmd_flags |= REQ_FAILFAST; + req->cmd_flags |= REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | + REQ_FAILFAST_DRIVER; req->cmd_len = COMMAND_SIZE(TEST_UNIT_READY); req->cmd[0] = TEST_UNIT_READY; req->timeout = HP_SW_TIMEOUT; @@ -204,7 +205,8 @@ static int hp_sw_start_stop(struct scsi_device *sdev, struct hp_sw_dh_data *h) return SCSI_DH_RES_TEMP_UNAVAIL; req->cmd_type = REQ_TYPE_BLOCK_PC; - req->cmd_flags |= REQ_FAILFAST; + req->cmd_flags |= REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | + REQ_FAILFAST_DRIVER; req->cmd_len = COMMAND_SIZE(START_STOP); req->cmd[0] = START_STOP; req->cmd[4] = 1; /* Start spin cycle */ diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c index 50bf95f3b5c..a43c3ed4df2 100644 --- a/drivers/scsi/device_handler/scsi_dh_rdac.c +++ b/drivers/scsi/device_handler/scsi_dh_rdac.c @@ -226,7 +226,8 @@ static struct request *get_rdac_req(struct scsi_device *sdev, } rq->cmd_type = REQ_TYPE_BLOCK_PC; - rq->cmd_flags |= REQ_FAILFAST | REQ_NOMERGE; + rq->cmd_flags |= REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | + REQ_FAILFAST_DRIVER; rq->retries = RDAC_RETRIES; rq->timeout = RDAC_TIMEOUT; diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c index b29360ed0bd..7c2d28924d2 100644 --- a/drivers/scsi/scsi_transport_spi.c +++ b/drivers/scsi/scsi_transport_spi.c @@ -109,7 +109,9 @@ static int spi_execute(struct scsi_device *sdev, const void *cmd, for(i = 0; i < DV_RETRIES; i++) { result = scsi_execute(sdev, cmd, dir, buffer, bufflen, sense, DV_TIMEOUT, /* retries */ 1, - REQ_FAILFAST); + REQ_FAILFAST_DEV | + REQ_FAILFAST_TRANSPORT | + REQ_FAILFAST_DRIVER); if (result & DRIVER_SENSE) { struct scsi_sense_hdr sshdr_tmp; if (!sshdr) -- cgit v1.2.3 From 4a27446f3e39b06c28d1c8e31d33a5340826ed5c Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Tue, 19 Aug 2008 18:45:31 -0500 Subject: [SCSI] modify scsi to handle new fail fast flags. This checks the errors the scsi-ml determined were retryable and returns if we should fast fail it based on the request fail fast flags. Without the patch, drivers like lpfc, qla2xxx and fcoe would return DID_ERROR for what it determines is a temporary communication problem. There is no loss of connectivity at that time and the driver thinks that it would be fast to retry at the driver level. SCSI-ml will however sees fast fail on the request and DID_ERROR and will fast fail the io. This will then cause dm-multipath to fail the path and possibley switch target controllers when we should be retrying at the scsi layer. We also were fast failing device errors to dm multiapth when unless the scsi_dh modules think otherwis we want to retry at the scsi layer because multipath can only retry the IO like scsi should have done. multipath is a little dumber though because it does not what the error was for and assumes that it should fail the paths. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/scsi_error.c | 38 ++++++++++++++++++++++++++++++++++++-- drivers/scsi/scsi_lib.c | 2 +- drivers/scsi/scsi_priv.h | 1 + 3 files changed, 38 insertions(+), 3 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 5bf8be21a16..ad019ece213 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -1218,6 +1218,40 @@ static void scsi_eh_offline_sdevs(struct list_head *work_q, return; } +/** + * scsi_noretry_cmd - determinte if command should be failed fast + * @scmd: SCSI cmd to examine. + */ +int scsi_noretry_cmd(struct scsi_cmnd *scmd) +{ + switch (host_byte(scmd->result)) { + case DID_OK: + break; + case DID_BUS_BUSY: + return blk_failfast_transport(scmd->request); + case DID_PARITY: + return blk_failfast_dev(scmd->request); + case DID_ERROR: + if (msg_byte(scmd->result) == COMMAND_COMPLETE && + status_byte(scmd->result) == RESERVATION_CONFLICT) + return 0; + /* fall through */ + case DID_SOFT_ERROR: + return blk_failfast_driver(scmd->request); + } + + switch (status_byte(scmd->result)) { + case CHECK_CONDITION: + /* + * assume caller has checked sense and determinted + * the check condition was retryable. + */ + return blk_failfast_dev(scmd->request); + } + + return 0; +} + /** * scsi_decide_disposition - Disposition a cmd on return from LLD. * @scmd: SCSI cmd to examine. @@ -1396,7 +1430,7 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd) * even if the request is marked fast fail, we still requeue * for queue congestion conditions (QUEUE_FULL or BUSY) */ if ((++scmd->retries) <= scmd->allowed - && !blk_noretry_request(scmd->request)) { + && !scsi_noretry_cmd(scmd)) { return NEEDS_RETRY; } else { /* @@ -1521,7 +1555,7 @@ void scsi_eh_flush_done_q(struct list_head *done_q) list_for_each_entry_safe(scmd, next, done_q, eh_entry) { list_del_init(&scmd->eh_entry); if (scsi_device_online(scmd->device) && - !blk_noretry_request(scmd->request) && + !scsi_noretry_cmd(scmd) && (++scmd->retries <= scmd->allowed)) { SCSI_LOG_ERROR_RECOVERY(3, printk("%s: flush" " retry cmd: %p\n", diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 91c74c55aa5..e5a9526d203 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -706,7 +706,7 @@ static struct scsi_cmnd *scsi_end_request(struct scsi_cmnd *cmd, int error, leftover = req->data_len; /* kill remainder if no retrys */ - if (error && blk_noretry_request(req)) + if (error && scsi_noretry_cmd(cmd)) blk_end_request(req, error, leftover); else { if (requeue) { diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h index 6cddd5dd323..e1850904ff7 100644 --- a/drivers/scsi/scsi_priv.h +++ b/drivers/scsi/scsi_priv.h @@ -59,6 +59,7 @@ void scsi_eh_ready_devs(struct Scsi_Host *shost, struct list_head *done_q); int scsi_eh_get_sense(struct list_head *work_q, struct list_head *done_q); +int scsi_noretry_cmd(struct scsi_cmnd *scmd); /* scsi_lib.c */ extern int scsi_maybe_unblock_host(struct scsi_device *sdev); -- cgit v1.2.3 From e59058c44025d71c9b7f260076a932935d3bba95 Mon Sep 17 00:00:00 2001 From: James Smart Date: Sun, 24 Aug 2008 21:49:00 -0400 Subject: [SCSI] lpfc 8.2.8 : Add kernel-doc function headers Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_attr.c | 919 +++++++++++++++++++++++++- drivers/scsi/lpfc/lpfc_debugfs.c | 327 ++++++++- drivers/scsi/lpfc/lpfc_els.c | 1345 +++++++++++++++++++++++++++++++++++++- drivers/scsi/lpfc/lpfc_init.c | 575 ++++++++++++---- drivers/scsi/lpfc/lpfc_mbox.c | 468 +++++++++++-- drivers/scsi/lpfc/lpfc_mem.c | 115 +++- drivers/scsi/lpfc/lpfc_sli.c | 1063 +++++++++++++++++++++++++++++- 7 files changed, 4556 insertions(+), 256 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 37bfa0bd1da..2926a2a7ee7 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -49,6 +49,21 @@ #define LPFC_LINK_SPEED_BITMAP 0x00000117 #define LPFC_LINK_SPEED_STRING "0, 1, 2, 4, 8" +/** + * lpfc_jedec_to_ascii: Hex to ascii convertor according to JEDEC rules. + * @incr: integer to convert. + * @hdw: ascii string holding converted integer plus a string terminator. + * + * Description: + * JEDEC Joint Electron Device Engineering Council. + * Convert a 32 bit integer composed of 8 nibbles into an 8 byte ascii + * character string. The string is then terminated with a NULL in byte 9. + * Hex 0-9 becomes ascii '0' to '9'. + * Hex a-f becomes ascii '=' to 'B' capital B. + * + * Notes: + * Coded for 32 bit integers only. + **/ static void lpfc_jedec_to_ascii(int incr, char hdw[]) { @@ -65,6 +80,14 @@ lpfc_jedec_to_ascii(int incr, char hdw[]) return; } +/** + * lpfc_drvr_version_show: Return the Emulex driver string with version number. + * @dev: class unused variable. + * @attr: device attribute, not used. + * @buf: on return contains the module description text. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_drvr_version_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -72,6 +95,14 @@ lpfc_drvr_version_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, LPFC_MODULE_DESC "\n"); } +/** + * lpfc_info_show: Return some pci info about the host in ascii. + * @dev: class converted to a Scsi_host structure. + * @attr: device attribute, not used. + * @buf: on return contains the formatted text from lpfc_info(). + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_info_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -81,6 +112,14 @@ lpfc_info_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "%s\n",lpfc_info(host)); } +/** + * lpfc_serialnum_show: Return the hba serial number in ascii. + * @dev: class converted to a Scsi_host structure. + * @attr: device attribute, not used. + * @buf: on return contains the formatted text serial number. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_serialnum_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -92,6 +131,18 @@ lpfc_serialnum_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "%s\n",phba->SerialNumber); } +/** + * lpfc_temp_sensor_show: Return the temperature sensor level. + * @dev: class converted to a Scsi_host structure. + * @attr: device attribute, not used. + * @buf: on return contains the formatted support level. + * + * Description: + * Returns a number indicating the temperature sensor level currently + * supported, zero or one in ascii. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_temp_sensor_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -102,6 +153,14 @@ lpfc_temp_sensor_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "%d\n",phba->temp_sensor_support); } +/** + * lpfc_modeldesc_show: Return the model description of the hba. + * @dev: class converted to a Scsi_host structure. + * @attr: device attribute, not used. + * @buf: on return contains the scsi vpd model description. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_modeldesc_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -113,6 +172,14 @@ lpfc_modeldesc_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "%s\n",phba->ModelDesc); } +/** + * lpfc_modelname_show: Return the model name of the hba. + * @dev: class converted to a Scsi_host structure. + * @attr: device attribute, not used. + * @buf: on return contains the scsi vpd model name. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_modelname_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -124,6 +191,14 @@ lpfc_modelname_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "%s\n",phba->ModelName); } +/** + * lpfc_programtype_show: Return the program type of the hba. + * @dev: class converted to a Scsi_host structure. + * @attr: device attribute, not used. + * @buf: on return contains the scsi vpd program type. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_programtype_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -135,6 +210,14 @@ lpfc_programtype_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "%s\n",phba->ProgramType); } +/** + * lpfc_vportnum_show: Return the port number in ascii of the hba. + * @dev: class converted to a Scsi_host structure. + * @attr: device attribute, not used. + * @buf: on return contains scsi vpd program type. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_vportnum_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -146,6 +229,14 @@ lpfc_vportnum_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "%s\n",phba->Port); } +/** + * lpfc_fwrev_show: Return the firmware rev running in the hba. + * @dev: class converted to a Scsi_host structure. + * @attr: device attribute, not used. + * @buf: on return contains the scsi vpd program type. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_fwrev_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -159,6 +250,14 @@ lpfc_fwrev_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "%s, sli-%d\n", fwrev, phba->sli_rev); } +/** + * lpfc_hdw_show: Return the jedec information about the hba. + * @dev: class converted to a Scsi_host structure. + * @attr: device attribute, not used. + * @buf: on return contains the scsi vpd program type. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_hdw_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -171,6 +270,15 @@ lpfc_hdw_show(struct device *dev, struct device_attribute *attr, char *buf) lpfc_jedec_to_ascii(vp->rev.biuRev, hdw); return snprintf(buf, PAGE_SIZE, "%s\n", hdw); } + +/** + * lpfc_option_rom_version_show: Return the adapter ROM FCode version. + * @dev: class converted to a Scsi_host structure. + * @attr: device attribute, not used. + * @buf: on return contains the ROM and FCode ascii strings. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_option_rom_version_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -181,6 +289,18 @@ lpfc_option_rom_version_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "%s\n", phba->OptionROMVersion); } + +/** + * lpfc_state_show: Return the link state of the port. + * @dev: class converted to a Scsi_host structure. + * @attr: device attribute, not used. + * @buf: on return contains text describing the state of the link. + * + * Notes: + * The switch statement has no default so zero will be returned. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_link_state_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -253,6 +373,18 @@ lpfc_link_state_show(struct device *dev, struct device_attribute *attr, return len; } +/** + * lpfc_num_discovered_ports_show: Return sum of mapped and unmapped vports. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: on return contains the sum of fc mapped and unmapped. + * + * Description: + * Returns the ascii text number of the sum of the fc mapped and unmapped + * vport counts. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_num_discovered_ports_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -264,7 +396,20 @@ lpfc_num_discovered_ports_show(struct device *dev, vport->fc_map_cnt + vport->fc_unmap_cnt); } - +/** + * lpfc_issue_lip: Misnomer, name carried over from long ago. + * @shost: Scsi_Host pointer. + * + * Description: + * Bring the link down gracefully then re-init the link. The firmware will + * re-init the fiber channel interface as required. Does not issue a LIP. + * + * Returns: + * -EPERM port offline or management commands are being blocked + * -ENOMEM cannot allocate memory for the mailbox command + * -EIO error sending the mailbox command + * zero for success + **/ static int lpfc_issue_lip(struct Scsi_Host *shost) { @@ -306,6 +451,21 @@ lpfc_issue_lip(struct Scsi_Host *shost) return 0; } +/** + * lpfc_do_offline: Issues a mailbox command to bring the link down. + * @phba: lpfc_hba pointer. + * @type: LPFC_EVT_OFFLINE, LPFC_EVT_WARM_START, LPFC_EVT_KILL. + * + * Notes: + * Assumes any error from lpfc_do_offline() will be negative. + * Can wait up to 5 seconds for the port ring buffers count + * to reach zero, prints a warning if it is not zero and continues. + * lpfc_workq_post_event() returns a non-zero return coce if call fails. + * + * Returns: + * -EIO error posting the event + * zero for success + **/ static int lpfc_do_offline(struct lpfc_hba *phba, uint32_t type) { @@ -353,6 +513,22 @@ lpfc_do_offline(struct lpfc_hba *phba, uint32_t type) return 0; } +/** + * lpfc_selective_reset: Offline then onlines the port. + * @phba: lpfc_hba pointer. + * + * Description: + * If the port is configured to allow a reset then the hba is brought + * offline then online. + * + * Notes: + * Assumes any error from lpfc_do_offline() will be negative. + * + * Returns: + * lpfc_do_offline() return code if not zero + * -EIO reset not configured or error posting the event + * zero for success + **/ static int lpfc_selective_reset(struct lpfc_hba *phba) { @@ -378,6 +554,27 @@ lpfc_selective_reset(struct lpfc_hba *phba) return 0; } +/** + * lpfc_issue_reset: Selectively resets an adapter. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: containing the string "selective". + * @count: unused variable. + * + * Description: + * If the buf contains the string "selective" then lpfc_selective_reset() + * is called to perform the reset. + * + * Notes: + * Assumes any error from lpfc_selective_reset() will be negative. + * If lpfc_selective_reset() returns zero then the length of the buffer + * is returned which indicates succcess + * + * Returns: + * -EINVAL if the buffer does not contain the string "selective" + * length of buf if lpfc-selective_reset() if the call succeeds + * return value of lpfc_selective_reset() if the call fails +**/ static ssize_t lpfc_issue_reset(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) @@ -397,6 +594,14 @@ lpfc_issue_reset(struct device *dev, struct device_attribute *attr, return status; } +/** + * lpfc_nport_evt_cnt_show: Return the number of nport events. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: on return contains the ascii number of nport events. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_nport_evt_cnt_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -408,6 +613,14 @@ lpfc_nport_evt_cnt_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "%d\n", phba->nport_event_cnt); } +/** + * lpfc_board_mode_show: Return the state of the board. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: on return contains the state of the adapter. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_board_mode_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -429,6 +642,19 @@ lpfc_board_mode_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "%s\n", state); } +/** + * lpfc_board_mode_store: Puts the hba in online, offline, warm or error state. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: containing one of the strings "online", "offline", "warm" or "error". + * @count: unused variable. + * + * Returns: + * -EACCES if enable hba reset not enabled + * -EINVAL if the buffer does not contain a valid string (see above) + * -EIO if lpfc_workq_post_event() or lpfc_do_offline() fails + * buf length greater than zero indicates success + **/ static ssize_t lpfc_board_mode_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) @@ -462,6 +688,24 @@ lpfc_board_mode_store(struct device *dev, struct device_attribute *attr, return -EIO; } +/** + * lpfc_get_hba_info: Return various bits of informaton about the adapter. + * @phba: pointer to the adapter structure. + * @mxri max xri count. + * @axri available xri count. + * @mrpi max rpi count. + * @arpi available rpi count. + * @mvpi max vpi count. + * @avpi available vpi count. + * + * Description: + * If an integer pointer for an count is not null then the value for the + * count is returned. + * + * Returns: + * zero on error + * one for success + **/ static int lpfc_get_hba_info(struct lpfc_hba *phba, uint32_t *mxri, uint32_t *axri, @@ -524,6 +768,20 @@ lpfc_get_hba_info(struct lpfc_hba *phba, return 1; } +/** + * lpfc_max_rpi_show: Return maximum rpi. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: on return contains the maximum rpi count in decimal or "Unknown". + * + * Description: + * Calls lpfc_get_hba_info() asking for just the mrpi count. + * If lpfc_get_hba_info() returns zero (failure) the buffer text is set + * to "Unknown" and the buffer length is returned, therefore the caller + * must check for "Unknown" in the buffer to detect a failure. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_max_rpi_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -538,6 +796,20 @@ lpfc_max_rpi_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "Unknown\n"); } +/** + * lpfc_used_rpi_show: Return maximum rpi minus available rpi. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: containing the used rpi count in decimal or "Unknown". + * + * Description: + * Calls lpfc_get_hba_info() asking for just the mrpi and arpi counts. + * If lpfc_get_hba_info() returns zero (failure) the buffer text is set + * to "Unknown" and the buffer length is returned, therefore the caller + * must check for "Unknown" in the buffer to detect a failure. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_used_rpi_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -552,6 +824,20 @@ lpfc_used_rpi_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "Unknown\n"); } +/** + * lpfc_max_xri_show: Return maximum xri. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: on return contains the maximum xri count in decimal or "Unknown". + * + * Description: + * Calls lpfc_get_hba_info() asking for just the mrpi count. + * If lpfc_get_hba_info() returns zero (failure) the buffer text is set + * to "Unknown" and the buffer length is returned, therefore the caller + * must check for "Unknown" in the buffer to detect a failure. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_max_xri_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -566,6 +852,20 @@ lpfc_max_xri_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "Unknown\n"); } +/** + * lpfc_used_xri_show: Return maximum xpi minus the available xpi. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: on return contains the used xri count in decimal or "Unknown". + * + * Description: + * Calls lpfc_get_hba_info() asking for just the mxri and axri counts. + * If lpfc_get_hba_info() returns zero (failure) the buffer text is set + * to "Unknown" and the buffer length is returned, therefore the caller + * must check for "Unknown" in the buffer to detect a failure. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_used_xri_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -580,6 +880,20 @@ lpfc_used_xri_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "Unknown\n"); } +/** + * lpfc_max_vpi_show: Return maximum vpi. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: on return contains the maximum vpi count in decimal or "Unknown". + * + * Description: + * Calls lpfc_get_hba_info() asking for just the mvpi count. + * If lpfc_get_hba_info() returns zero (failure) the buffer text is set + * to "Unknown" and the buffer length is returned, therefore the caller + * must check for "Unknown" in the buffer to detect a failure. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_max_vpi_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -594,6 +908,20 @@ lpfc_max_vpi_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "Unknown\n"); } +/** + * lpfc_used_vpi_show: Return maximum vpi minus the available vpi. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: on return contains the used vpi count in decimal or "Unknown". + * + * Description: + * Calls lpfc_get_hba_info() asking for just the mvpi and avpi counts. + * If lpfc_get_hba_info() returns zero (failure) the buffer text is set + * to "Unknown" and the buffer length is returned, therefore the caller + * must check for "Unknown" in the buffer to detect a failure. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_used_vpi_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -608,6 +936,19 @@ lpfc_used_vpi_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "Unknown\n"); } +/** + * lpfc_npiv_info_show: Return text about NPIV support for the adapter. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: text that must be interpreted to determine if npiv is supported. + * + * Description: + * Buffer will contain text indicating npiv is not suppoerted on the port, + * the port is an NPIV physical port, or it is an npiv virtual port with + * the id of the vport. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_npiv_info_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -623,6 +964,17 @@ lpfc_npiv_info_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "NPIV Virtual (VPI %d)\n", vport->vpi); } +/** + * lpfc_poll_show: Return text about poll support for the adapter. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: on return contains the cfg_poll in hex. + * + * Notes: + * cfg_poll should be a lpfc_polling_flags type. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_poll_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -634,6 +986,20 @@ lpfc_poll_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "%#x\n", phba->cfg_poll); } +/** + * lpfc_poll_store: Set the value of cfg_poll for the adapter. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: one or more lpfc_polling_flags values. + * @count: not used. + * + * Notes: + * buf contents converted to integer and checked for a valid value. + * + * Returns: + * -EINVAL if the buffer connot be converted or is out of range + * length of the buf on success + **/ static ssize_t lpfc_poll_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) @@ -692,6 +1058,20 @@ lpfc_poll_store(struct device *dev, struct device_attribute *attr, return strlen(buf); } +/** + * lpfc_param_show: Return a cfg attribute value in decimal. + * + * Description: + * Macro that given an attr e.g. hba_queue_depth expands + * into a function with the name lpfc_hba_queue_depth_show. + * + * lpfc_##attr##_show: Return the decimal value of an adapters cfg_xxx field. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: on return contains the attribute value in decimal. + * + * Returns: size of formatted string. + **/ #define lpfc_param_show(attr) \ static ssize_t \ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ @@ -706,6 +1086,20 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ phba->cfg_##attr);\ } +/** + * lpfc_param_hex_show: Return a cfg attribute value in hex. + * + * Description: + * Macro that given an attr e.g. hba_queue_depth expands + * into a function with the name lpfc_hba_queue_depth_show + * + * lpfc_##attr##_show: Return the hex value of an adapters cfg_xxx field. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: on return contains the attribute value in hexidecimal. + * + * Returns: size of formatted string. + **/ #define lpfc_param_hex_show(attr) \ static ssize_t \ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ @@ -720,6 +1114,25 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ phba->cfg_##attr);\ } +/** + * lpfc_param_init: Intializes a cfg attribute. + * + * Description: + * Macro that given an attr e.g. hba_queue_depth expands + * into a function with the name lpfc_hba_queue_depth_init. The macro also + * takes a default argument, a minimum and maximum argument. + * + * lpfc_##attr##_init: Initializes an attribute. + * @phba: pointer the the adapter structure. + * @val: integer attribute value. + * + * Validates the min and max values then sets the adapter config field + * accordingly, or uses the default if out of range and prints an error message. + * + * Returns: + * zero on success + * -EINVAL if default used + **/ #define lpfc_param_init(attr, default, minval, maxval) \ static int \ lpfc_##attr##_init(struct lpfc_hba *phba, int val) \ @@ -735,6 +1148,26 @@ lpfc_##attr##_init(struct lpfc_hba *phba, int val) \ return -EINVAL;\ } +/** + * lpfc_param_set: Set a cfg attribute value. + * + * Description: + * Macro that given an attr e.g. hba_queue_depth expands + * into a function with the name lpfc_hba_queue_depth_set + * + * lpfc_##attr##_set: Sets an attribute value. + * @phba: pointer the the adapter structure. + * @val: integer attribute value. + * + * Description: + * Validates the min and max values then sets the + * adapter config field if in the valid range. prints error message + * and does not set the parameter if invalid. + * + * Returns: + * zero on success + * -EINVAL if val is invalid + **/ #define lpfc_param_set(attr, default, minval, maxval) \ static int \ lpfc_##attr##_set(struct lpfc_hba *phba, int val) \ @@ -749,6 +1182,27 @@ lpfc_##attr##_set(struct lpfc_hba *phba, int val) \ return -EINVAL;\ } +/** + * lpfc_param_store: Set a vport attribute value. + * + * Description: + * Macro that given an attr e.g. hba_queue_depth expands + * into a function with the name lpfc_hba_queue_depth_store. + * + * lpfc_##attr##_store: Set an sttribute value. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: contains the attribute value in ascii. + * @count: not used. + * + * Description: + * Convert the ascii text number to an integer, then + * use the lpfc_##attr##_set function to set the value. + * + * Returns: + * -EINVAL if val is invalid or lpfc_##attr##_set() fails + * length of buffer upon success. + **/ #define lpfc_param_store(attr) \ static ssize_t \ lpfc_##attr##_store(struct device *dev, struct device_attribute *attr, \ @@ -768,6 +1222,20 @@ lpfc_##attr##_store(struct device *dev, struct device_attribute *attr, \ return -EINVAL;\ } +/** + * lpfc_vport_param_show: Return decimal formatted cfg attribute value. + * + * Description: + * Macro that given an attr e.g. hba_queue_depth expands + * into a function with the name lpfc_hba_queue_depth_show + * + * lpfc_##attr##_show: prints the attribute value in decimal. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: on return contains the attribute value in decimal. + * + * Returns: length of formatted string. + **/ #define lpfc_vport_param_show(attr) \ static ssize_t \ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ @@ -780,6 +1248,21 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ return snprintf(buf, PAGE_SIZE, "%d\n", vport->cfg_##attr);\ } +/** + * lpfc_vport_param_hex_show: Return hex formatted attribute value. + * + * Description: + * Macro that given an attr e.g. + * hba_queue_depth expands into a function with the name + * lpfc_hba_queue_depth_show + * + * lpfc_##attr##_show: prints the attribute value in hexidecimal. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: on return contains the attribute value in hexidecimal. + * + * Returns: length of formatted string. + **/ #define lpfc_vport_param_hex_show(attr) \ static ssize_t \ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ @@ -792,6 +1275,24 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ return snprintf(buf, PAGE_SIZE, "%#x\n", vport->cfg_##attr);\ } +/** + * lpfc_vport_param_init: Initialize a vport cfg attribute. + * + * Description: + * Macro that given an attr e.g. hba_queue_depth expands + * into a function with the name lpfc_hba_queue_depth_init. The macro also + * takes a default argument, a minimum and maximum argument. + * + * lpfc_##attr##_init: validates the min and max values then sets the + * adapter config field accordingly, or uses the default if out of range + * and prints an error message. + * @phba: pointer the the adapter structure. + * @val: integer attribute value. + * + * Returns: + * zero on success + * -EINVAL if default used + **/ #define lpfc_vport_param_init(attr, default, minval, maxval) \ static int \ lpfc_##attr##_init(struct lpfc_vport *vport, int val) \ @@ -807,6 +1308,23 @@ lpfc_##attr##_init(struct lpfc_vport *vport, int val) \ return -EINVAL;\ } +/** + * lpfc_vport_param_set: Set a vport cfg attribute. + * + * Description: + * Macro that given an attr e.g. hba_queue_depth expands + * into a function with the name lpfc_hba_queue_depth_set + * + * lpfc_##attr##_set: validates the min and max values then sets the + * adapter config field if in the valid range. prints error message + * and does not set the parameter if invalid. + * @phba: pointer the the adapter structure. + * @val: integer attribute value. + * + * Returns: + * zero on success + * -EINVAL if val is invalid + **/ #define lpfc_vport_param_set(attr, default, minval, maxval) \ static int \ lpfc_##attr##_set(struct lpfc_vport *vport, int val) \ @@ -821,6 +1339,23 @@ lpfc_##attr##_set(struct lpfc_vport *vport, int val) \ return -EINVAL;\ } +/** + * lpfc_vport_param_store: Set a vport attribute. + * + * Description: + * Macro that given an attr e.g. hba_queue_depth + * expands into a function with the name lpfc_hba_queue_depth_store + * + * lpfc_##attr##_store: convert the ascii text number to an integer, then + * use the lpfc_##attr##_set function to set the value. + * @cdev: class device that is converted into a Scsi_host. + * @buf: contains the attribute value in decimal. + * @count: not used. + * + * Returns: + * -EINVAL if val is invalid or lpfc_##attr##_set() fails + * length of buffer upon success. + **/ #define lpfc_vport_param_store(attr) \ static ssize_t \ lpfc_##attr##_store(struct device *dev, struct device_attribute *attr, \ @@ -958,6 +1493,17 @@ static DEVICE_ATTR(lpfc_temp_sensor, S_IRUGO, lpfc_temp_sensor_show, NULL); static char *lpfc_soft_wwn_key = "C99G71SL8032A"; +/** + * lpfc_soft_wwn_enable_store: Allows setting of the wwn if the key is valid. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: containing the string lpfc_soft_wwn_key. + * @count: must be size of lpfc_soft_wwn_key. + * + * Returns: + * -EINVAL if the buffer does not contain lpfc_soft_wwn_key + * length of buf indicates success + **/ static ssize_t lpfc_soft_wwn_enable_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) @@ -994,6 +1540,14 @@ lpfc_soft_wwn_enable_store(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR(lpfc_soft_wwn_enable, S_IWUSR, NULL, lpfc_soft_wwn_enable_store); +/** + * lpfc_soft_wwpn_show: Return the cfg soft ww port name of the adapter. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: on return contains the wwpn in hexidecimal. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_soft_wwpn_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -1006,7 +1560,19 @@ lpfc_soft_wwpn_show(struct device *dev, struct device_attribute *attr, (unsigned long long)phba->cfg_soft_wwpn); } - +/** + * lpfc_soft_wwpn_store: Set the ww port name of the adapter. + * @dev class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: contains the wwpn in hexidecimal. + * @count: number of wwpn bytes in buf + * + * Returns: + * -EACCES hba reset not enabled, adapter over temp + * -EINVAL soft wwn not enabled, count is invalid, invalid wwpn byte invalid + * -EIO error taking adapter offline or online + * value of count on success + **/ static ssize_t lpfc_soft_wwpn_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) @@ -1080,6 +1646,14 @@ lpfc_soft_wwpn_store(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR(lpfc_soft_wwpn, S_IRUGO | S_IWUSR,\ lpfc_soft_wwpn_show, lpfc_soft_wwpn_store); +/** + * lpfc_soft_wwnn_show: Return the cfg soft ww node name for the adapter. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: on return contains the wwnn in hexidecimal. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_soft_wwnn_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -1090,7 +1664,16 @@ lpfc_soft_wwnn_show(struct device *dev, struct device_attribute *attr, (unsigned long long)phba->cfg_soft_wwnn); } - +/** + * lpfc_soft_wwnn_store: sets the ww node name of the adapter. + * @cdev: class device that is converted into a Scsi_host. + * @buf: contains the ww node name in hexidecimal. + * @count: number of wwnn bytes in buf. + * + * Returns: + * -EINVAL soft wwn not enabled, count is invalid, invalid wwnn byte invalid + * value of count on success + **/ static ssize_t lpfc_soft_wwnn_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) @@ -1178,6 +1761,15 @@ module_param(lpfc_nodev_tmo, int, 0); MODULE_PARM_DESC(lpfc_nodev_tmo, "Seconds driver will hold I/O waiting " "for a device to come back"); + +/** + * lpfc_nodev_tmo_show: Return the hba dev loss timeout value. + * @dev: class converted to a Scsi_host structure. + * @attr: device attribute, not used. + * @buf: on return contains the dev loss timeout in decimal. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_nodev_tmo_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -1189,6 +1781,21 @@ lpfc_nodev_tmo_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "%d\n", vport->cfg_devloss_tmo); } +/** + * lpfc_nodev_tmo_init: Set the hba nodev timeout value. + * @vport: lpfc vport structure pointer. + * @val: contains the nodev timeout value. + * + * Description: + * If the devloss tmo is already set then nodev tmo is set to devloss tmo, + * a kernel error message is printed and zero is returned. + * Else if val is in range then nodev tmo and devloss tmo are set to val. + * Otherwise nodev tmo is set to the default value. + * + * Returns: + * zero if already set or if val is in range + * -EINVAL val out of range + **/ static int lpfc_nodev_tmo_init(struct lpfc_vport *vport, int val) { @@ -1215,6 +1822,13 @@ lpfc_nodev_tmo_init(struct lpfc_vport *vport, int val) return -EINVAL; } +/** + * lpfc_update_rport_devloss_tmo: Update dev loss tmo value. + * @vport: lpfc vport structure pointer. + * + * Description: + * Update all the ndlp's dev loss tmo with the vport devloss tmo value. + **/ static void lpfc_update_rport_devloss_tmo(struct lpfc_vport *vport) { @@ -1229,6 +1843,21 @@ lpfc_update_rport_devloss_tmo(struct lpfc_vport *vport) spin_unlock_irq(shost->host_lock); } +/** + * lpfc_nodev_tmo_set: Set the vport nodev tmo and devloss tmo values. + * @vport: lpfc vport structure pointer. + * @val: contains the tmo value. + * + * Description: + * If the devloss tmo is already set or the vport dev loss tmo has changed + * then a kernel error message is printed and zero is returned. + * Else if val is in range then nodev tmo and devloss tmo are set to val. + * Otherwise nodev tmo is set to the default value. + * + * Returns: + * zero if already set or if val is in range + * -EINVAL val out of range + **/ static int lpfc_nodev_tmo_set(struct lpfc_vport *vport, int val) { @@ -1269,6 +1898,21 @@ MODULE_PARM_DESC(lpfc_devloss_tmo, lpfc_vport_param_init(devloss_tmo, LPFC_DEF_DEVLOSS_TMO, LPFC_MIN_DEVLOSS_TMO, LPFC_MAX_DEVLOSS_TMO) lpfc_vport_param_show(devloss_tmo) + +/** + * lpfc_devloss_tmo_set: Sets vport nodev tmo, devloss tmo values, changed bit. + * @vport: lpfc vport structure pointer. + * @val: contains the tmo value. + * + * Description: + * If val is in a valid range then set the vport nodev tmo, + * devloss tmo, also set the vport dev loss tmo changed flag. + * Else a kernel error message is printed. + * + * Returns: + * zero if val is in range + * -EINVAL val out of range + **/ static int lpfc_devloss_tmo_set(struct lpfc_vport *vport, int val) { @@ -1366,6 +2010,21 @@ MODULE_PARM_DESC(lpfc_restrict_login, "Restrict virtual ports login to remote initiators."); lpfc_vport_param_show(restrict_login); +/** + * lpfc_restrict_login_init: Set the vport restrict login flag. + * @vport: lpfc vport structure pointer. + * @val: contains the restrict login value. + * + * Description: + * If val is not in a valid range then log a kernel error message and set + * the vport restrict login to one. + * If the port type is physical clear the restrict login flag and return. + * Else set the restrict login flag to val. + * + * Returns: + * zero if val is in range + * -EINVAL val out of range + **/ static int lpfc_restrict_login_init(struct lpfc_vport *vport, int val) { @@ -1385,6 +2044,22 @@ lpfc_restrict_login_init(struct lpfc_vport *vport, int val) return 0; } +/** + * lpfc_restrict_login_set: Set the vport restrict login flag. + * @vport: lpfc vport structure pointer. + * @val: contains the restrict login value. + * + * Description: + * If val is not in a valid range then log a kernel error message and set + * the vport restrict login to one. + * If the port type is physical and the val is not zero log a kernel + * error message, clear the restrict login flag and return zero. + * Else set the restrict login flag to val. + * + * Returns: + * zero if val is in range + * -EINVAL val out of range + **/ static int lpfc_restrict_login_set(struct lpfc_vport *vport, int val) { @@ -1441,6 +2116,23 @@ LPFC_VPORT_ATTR_R(scan_down, 1, 0, 1, # Set loop mode if you want to run as an NL_Port. Value range is [0,0x6]. # Default value is 0. */ + +/** + * lpfc_topology_set: Set the adapters topology field. + * @phba: lpfc_hba pointer. + * @val: topology value. + * + * Description: + * If val is in a valid range then set the adapter's topology field and + * issue a lip; if the lip fails reset the topology to the old value. + * + * If the value is not in range log a kernel error message and return an error. + * + * Returns: + * zero if val is in range and lip okay + * non-zero return value from lpfc_issue_lip() + * -EINVAL val out of range + **/ static int lpfc_topology_set(struct lpfc_hba *phba, int val) { @@ -1479,6 +2171,24 @@ static DEVICE_ATTR(lpfc_topology, S_IRUGO | S_IWUSR, # 8 = 8 Gigabaud # Value range is [0,8]. Default value is 0. */ + +/** + * lpfc_link_speed_set: Set the adapters link speed. + * @phba: lpfc_hba pointer. + * @val: link speed value. + * + * Description: + * If val is in a valid range then set the adapter's link speed field and + * issue a lip; if the lip fails reset the link speed to the old value. + * + * Notes: + * If the value is not in range log a kernel error message and return an error. + * + * Returns: + * zero if val is in range and lip okay. + * non-zero return value from lpfc_issue_lip() + * -EINVAL val out of range + **/ static int lpfc_link_speed_set(struct lpfc_hba *phba, int val) { @@ -1513,6 +2223,23 @@ static int lpfc_link_speed = 0; module_param(lpfc_link_speed, int, 0); MODULE_PARM_DESC(lpfc_link_speed, "Select link speed"); lpfc_param_show(link_speed) + +/** + * lpfc_link_speed_init: Set the adapters link speed. + * @phba: lpfc_hba pointer. + * @val: link speed value. + * + * Description: + * If val is in a valid range then set the adapter's link speed field. + * + * Notes: + * If the value is not in range log a kernel error message, clear the link + * speed and return an error. + * + * Returns: + * zero if val saved. + * -EINVAL val out of range + **/ static int lpfc_link_speed_init(struct lpfc_hba *phba, int val) { @@ -1734,6 +2461,24 @@ struct device_attribute *lpfc_vport_attrs[] = { NULL, }; +/** + * sysfs_ctlreg_write: Write method for writing to ctlreg. + * @kobj: kernel kobject that contains the kernel class device. + * @bin_attr: kernel attributes passed to us. + * @buf: contains the data to be written to the adapter IOREG space. + * @off: offset into buffer to beginning of data. + * @count: bytes to transfer. + * + * Description: + * Accessed via /sys/class/scsi_host/hostxxx/ctlreg. + * Uses the adapter io control registers to send buf contents to the adapter. + * + * Returns: + * -ERANGE off and count combo out of range + * -EINVAL off, count or buff address invalid + * -EPERM adapter is offline + * value of count, buf contents written + **/ static ssize_t sysfs_ctlreg_write(struct kobject *kobj, struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) @@ -1766,6 +2511,23 @@ sysfs_ctlreg_write(struct kobject *kobj, struct bin_attribute *bin_attr, return count; } +/** + * sysfs_ctlreg_read: Read method for reading from ctlreg. + * @kobj: kernel kobject that contains the kernel class device. + * @bin_attr: kernel attributes passed to us. + * @buf: if succesful contains the data from the adapter IOREG space. + * @off: offset into buffer to beginning of data. + * @count: bytes to transfer. + * + * Description: + * Accessed via /sys/class/scsi_host/hostxxx/ctlreg. + * Uses the adapter io control registers to read data into buf. + * + * Returns: + * -ERANGE off and count combo out of range + * -EINVAL off, count or buff address invalid + * value of count, buf contents read + **/ static ssize_t sysfs_ctlreg_read(struct kobject *kobj, struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) @@ -1810,7 +2572,10 @@ static struct bin_attribute sysfs_ctlreg_attr = { .write = sysfs_ctlreg_write, }; - +/** + * sysfs_mbox_idle: frees the sysfs mailbox. + * @phba: lpfc_hba pointer + **/ static void sysfs_mbox_idle(struct lpfc_hba *phba) { @@ -1824,6 +2589,27 @@ sysfs_mbox_idle(struct lpfc_hba *phba) } } +/** + * sysfs_mbox_write: Write method for writing information via mbox. + * @kobj: kernel kobject that contains the kernel class device. + * @bin_attr: kernel attributes passed to us. + * @buf: contains the data to be written to sysfs mbox. + * @off: offset into buffer to beginning of data. + * @count: bytes to transfer. + * + * Description: + * Accessed via /sys/class/scsi_host/hostxxx/mbox. + * Uses the sysfs mbox to send buf contents to the adapter. + * + * Returns: + * -ERANGE off and count combo out of range + * -EINVAL off, count or buff address invalid + * zero if count is zero + * -EPERM adapter is offline + * -ENOMEM failed to allocate memory for the mail box + * -EAGAIN offset, state or mbox is NULL + * count number of bytes transferred + **/ static ssize_t sysfs_mbox_write(struct kobject *kobj, struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) @@ -1878,6 +2664,29 @@ sysfs_mbox_write(struct kobject *kobj, struct bin_attribute *bin_attr, return count; } +/** + * sysfs_mbox_read: Read method for reading information via mbox. + * @kobj: kernel kobject that contains the kernel class device. + * @bin_attr: kernel attributes passed to us. + * @buf: contains the data to be read from sysfs mbox. + * @off: offset into buffer to beginning of data. + * @count: bytes to transfer. + * + * Description: + * Accessed via /sys/class/scsi_host/hostxxx/mbox. + * Uses the sysfs mbox to receive data from to the adapter. + * + * Returns: + * -ERANGE off greater than mailbox command size + * -EINVAL off, count or buff address invalid + * zero if off and count are zero + * -EACCES adapter over temp + * -EPERM garbage can value to catch a multitude of errors + * -EAGAIN management IO not permitted, state or off error + * -ETIME mailbox timeout + * -ENODEV mailbox error + * count number of bytes transferred + **/ static ssize_t sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) @@ -2059,6 +2868,14 @@ static struct bin_attribute sysfs_mbox_attr = { .write = sysfs_mbox_write, }; +/** + * lpfc_alloc_sysfs_attr: Creates the sysfs, ctlreg, menlo and mbox entries. + * @vport: address of lpfc vport structure. + * + * Return codes: + * zero on success + * error return code from sysfs_create_bin_file() + **/ int lpfc_alloc_sysfs_attr(struct lpfc_vport *vport) { @@ -2082,6 +2899,10 @@ out: return error; } +/** + * lpfc_free_sysfs_attr: Removes the sysfs, ctlreg, menlo and mbox entries. + * @vport: address of lpfc vport structure. + **/ void lpfc_free_sysfs_attr(struct lpfc_vport *vport) { @@ -2096,6 +2917,10 @@ lpfc_free_sysfs_attr(struct lpfc_vport *vport) * Dynamic FC Host Attributes Support */ +/** + * lpfc_get_host_port_id: Copy the vport DID into the scsi host port id. + * @shost: kernel scsi host pointer. + **/ static void lpfc_get_host_port_id(struct Scsi_Host *shost) { @@ -2105,6 +2930,10 @@ lpfc_get_host_port_id(struct Scsi_Host *shost) fc_host_port_id(shost) = vport->fc_myDID; } +/** + * lpfc_get_host_port_type: Set the value of the scsi host port type. + * @shost: kernel scsi host pointer. + **/ static void lpfc_get_host_port_type(struct Scsi_Host *shost) { @@ -2133,6 +2962,10 @@ lpfc_get_host_port_type(struct Scsi_Host *shost) spin_unlock_irq(shost->host_lock); } +/** + * lpfc_get_host_port_state: Set the value of the scsi host port state. + * @shost: kernel scsi host pointer. + **/ static void lpfc_get_host_port_state(struct Scsi_Host *shost) { @@ -2167,6 +3000,10 @@ lpfc_get_host_port_state(struct Scsi_Host *shost) spin_unlock_irq(shost->host_lock); } +/** + * lpfc_get_host_speed: Set the value of the scsi host speed. + * @shost: kernel scsi host pointer. + **/ static void lpfc_get_host_speed(struct Scsi_Host *shost) { @@ -2199,6 +3036,10 @@ lpfc_get_host_speed(struct Scsi_Host *shost) spin_unlock_irq(shost->host_lock); } +/** + * lpfc_get_host_fabric_name: Set the value of the scsi host fabric name. + * @shost: kernel scsi host pointer. + **/ static void lpfc_get_host_fabric_name (struct Scsi_Host *shost) { @@ -2221,6 +3062,18 @@ lpfc_get_host_fabric_name (struct Scsi_Host *shost) fc_host_fabric_name(shost) = node_name; } +/** + * lpfc_get_stats: Return statistical information about the adapter. + * @shost: kernel scsi host pointer. + * + * Notes: + * NULL on error for link down, no mbox pool, sli2 active, + * management not allowed, memory allocation error, or mbox error. + * + * Returns: + * NULL for error + * address of the adapter host statistics + **/ static struct fc_host_statistics * lpfc_get_stats(struct Scsi_Host *shost) { @@ -2334,6 +3187,10 @@ lpfc_get_stats(struct Scsi_Host *shost) return hs; } +/** + * lpfc_reset_stats: Copy the adapter link stats information. + * @shost: kernel scsi host pointer. + **/ static void lpfc_reset_stats(struct Scsi_Host *shost) { @@ -2411,6 +3268,14 @@ lpfc_reset_stats(struct Scsi_Host *shost) * are no sysfs handlers for link_down_tmo. */ +/** + * lpfc_get_node_by_target: Return the nodelist for a target. + * @starget: kernel scsi target pointer. + * + * Returns: + * address of the node list if found + * NULL target not found + **/ static struct lpfc_nodelist * lpfc_get_node_by_target(struct scsi_target *starget) { @@ -2432,6 +3297,10 @@ lpfc_get_node_by_target(struct scsi_target *starget) return NULL; } +/** + * lpfc_get_starget_port_id: Set the target port id to the ndlp DID or -1. + * @starget: kernel scsi target pointer. + **/ static void lpfc_get_starget_port_id(struct scsi_target *starget) { @@ -2440,6 +3309,12 @@ lpfc_get_starget_port_id(struct scsi_target *starget) fc_starget_port_id(starget) = ndlp ? ndlp->nlp_DID : -1; } +/** + * lpfc_get_starget_node_name: Set the target node name. + * @starget: kernel scsi target pointer. + * + * Description: Set the target node name to the ndlp node name wwn or zero. + **/ static void lpfc_get_starget_node_name(struct scsi_target *starget) { @@ -2449,6 +3324,12 @@ lpfc_get_starget_node_name(struct scsi_target *starget) ndlp ? wwn_to_u64(ndlp->nlp_nodename.u.wwn) : 0; } +/** + * lpfc_get_starget_port_name: Set the target port name. + * @starget: kernel scsi target pointer. + * + * Description: set the target port name to the ndlp port name wwn or zero. + **/ static void lpfc_get_starget_port_name(struct scsi_target *starget) { @@ -2458,6 +3339,15 @@ lpfc_get_starget_port_name(struct scsi_target *starget) ndlp ? wwn_to_u64(ndlp->nlp_portname.u.wwn) : 0; } +/** + * lpfc_set_rport_loss_tmo: Set the rport dev loss tmo. + * @rport: fc rport address. + * @timeout: new value for dev loss tmo. + * + * Description: + * If timeout is non zero set the dev_loss_tmo to timeout, else set + * dev_loss_tmo to one. + **/ static void lpfc_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout) { @@ -2467,7 +3357,18 @@ lpfc_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout) rport->dev_loss_tmo = 1; } - +/** + * lpfc_rport_show_function: Return rport target information. + * + * Description: + * Macro that uses field to generate a function with the name lpfc_show_rport_ + * + * lpfc_show_rport_##field: returns the bytes formatted in buf + * @cdev: class converted to an fc_rport. + * @buf: on return contains the target_field or zero. + * + * Returns: size of formatted string. + **/ #define lpfc_rport_show_function(field, format_string, sz, cast) \ static ssize_t \ lpfc_show_rport_##field (struct device *dev, \ @@ -2602,6 +3503,10 @@ struct fc_function_template lpfc_vport_transport_functions = { .vport_disable = lpfc_vport_disable, }; +/** + * lpfc_get_cfgparam: Used during probe_one to init the adapter structure. + * @phba: lpfc_hba pointer. + **/ void lpfc_get_cfgparam(struct lpfc_hba *phba) { @@ -2637,6 +3542,10 @@ lpfc_get_cfgparam(struct lpfc_hba *phba) return; } +/** + * lpfc_get_vport_cfgparam: Used during port create, init the vport structure. + * @vport: lpfc_vport pointer. + **/ void lpfc_get_vport_cfgparam(struct lpfc_vport *vport) { diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c index 094b47e94b2..2588eadffbb 100644 --- a/drivers/scsi/lpfc/lpfc_debugfs.c +++ b/drivers/scsi/lpfc/lpfc_debugfs.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2007 Emulex. All rights reserved. * + * Copyright (C) 2007-2008 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * * @@ -46,13 +46,14 @@ #include "lpfc_debugfs.h" #ifdef CONFIG_LPFC_DEBUG_FS -/* debugfs interface +/** + * debugfs interface * * To access this interface the user should: * # mkdir /debug * # mount -t debugfs none /debug * - * The lpfc debugfs directory hierachy is: + * The lpfc debugfs directory hierarchy is: * lpfc/lpfcX/vportY * where X is the lpfc hba unique_id * where Y is the vport VPI on that hba @@ -61,14 +62,21 @@ * discovery_trace * This is an ACSII readable file that contains a trace of the last * lpfc_debugfs_max_disc_trc events that happened on a specific vport. - * See lpfc_debugfs.h for different categories of - * discovery events. To enable the discovery trace, the following - * module parameters must be set: + * See lpfc_debugfs.h for different categories of discovery events. + * To enable the discovery trace, the following module parameters must be set: * lpfc_debugfs_enable=1 Turns on lpfc debugfs filesystem support * lpfc_debugfs_max_disc_trc=X Where X is the event trace depth for * EACH vport. X MUST also be a power of 2. * lpfc_debugfs_mask_disc_trc=Y Where Y is an event mask as defined in * lpfc_debugfs.h . + * + * slow_ring_trace + * This is an ACSII readable file that contains a trace of the last + * lpfc_debugfs_max_slow_ring_trc events that happened on a specific HBA. + * To enable the slow ring trace, the following module parameters must be set: + * lpfc_debugfs_enable=1 Turns on lpfc debugfs filesystem support + * lpfc_debugfs_max_slow_ring_trc=X Where X is the event trace depth for + * the HBA. X MUST also be a power of 2. */ static int lpfc_debugfs_enable = 1; module_param(lpfc_debugfs_enable, int, 0); @@ -117,6 +125,25 @@ struct lpfc_debug { static atomic_t lpfc_debugfs_seq_trc_cnt = ATOMIC_INIT(0); static unsigned long lpfc_debugfs_start_time = 0L; +/** + * lpfc_debugfs_disc_trc_data - Dump discovery logging to a buffer. + * @vport: The vport to gather the log info from. + * @buf: The buffer to dump log into. + * @size: The maximum amount of data to process. + * + * Description: + * This routine gathers the lpfc discovery debugfs data from the @vport and + * dumps it to @buf up to @size number of bytes. It will start at the next entry + * in the log and process the log until the end of the buffer. Then it will + * gather from the beginning of the log and process until the current entry. + * + * Notes: + * Discovery logging will be disabled while while this routine dumps the log. + * + * Return Value: + * This routine returns the amount of bytes that were dumped into @buf and will + * not exceed @size. + **/ static int lpfc_debugfs_disc_trc_data(struct lpfc_vport *vport, char *buf, int size) { @@ -125,7 +152,6 @@ lpfc_debugfs_disc_trc_data(struct lpfc_vport *vport, char *buf, int size) struct lpfc_debugfs_trc *dtp; char buffer[LPFC_DEBUG_TRC_ENTRY_SIZE]; - enable = lpfc_debugfs_enable; lpfc_debugfs_enable = 0; @@ -159,6 +185,25 @@ lpfc_debugfs_disc_trc_data(struct lpfc_vport *vport, char *buf, int size) return len; } +/** + * lpfc_debugfs_slow_ring_trc_data - Dump slow ring logging to a buffer. + * @phba: The HBA to gather the log info from. + * @buf: The buffer to dump log into. + * @size: The maximum amount of data to process. + * + * Description: + * This routine gathers the lpfc slow ring debugfs data from the @phba and + * dumps it to @buf up to @size number of bytes. It will start at the next entry + * in the log and process the log until the end of the buffer. Then it will + * gather from the beginning of the log and process until the current entry. + * + * Notes: + * Slow ring logging will be disabled while while this routine dumps the log. + * + * Return Value: + * This routine returns the amount of bytes that were dumped into @buf and will + * not exceed @size. + **/ static int lpfc_debugfs_slow_ring_trc_data(struct lpfc_hba *phba, char *buf, int size) { @@ -203,6 +248,25 @@ lpfc_debugfs_slow_ring_trc_data(struct lpfc_hba *phba, char *buf, int size) static int lpfc_debugfs_last_hbq = -1; +/** + * lpfc_debugfs_hbqinfo_data - Dump host buffer queue info to a buffer. + * @phba: The HBA to gather host buffer info from. + * @buf: The buffer to dump log into. + * @size: The maximum amount of data to process. + * + * Description: + * This routine dumps the host buffer queue info from the @phba to @buf up to + * @size number of bytes. A header that describes the current hbq state will be + * dumped to @buf first and then info on each hbq entry will be dumped to @buf + * until @size bytes have been dumped or all the hbq info has been dumped. + * + * Notes: + * This routine will rotate through each configured HBQ each time called. + * + * Return Value: + * This routine returns the amount of bytes that were dumped into @buf and will + * not exceed @size. + **/ static int lpfc_debugfs_hbqinfo_data(struct lpfc_hba *phba, char *buf, int size) { @@ -303,6 +367,24 @@ skipit: static int lpfc_debugfs_last_hba_slim_off; +/** + * lpfc_debugfs_dumpHBASlim_data - Dump HBA SLIM info to a buffer. + * @phba: The HBA to gather SLIM info from. + * @buf: The buffer to dump log into. + * @size: The maximum amount of data to process. + * + * Description: + * This routine dumps the current contents of HBA SLIM for the HBA associated + * with @phba to @buf up to @size bytes of data. This is the raw HBA SLIM data. + * + * Notes: + * This routine will only dump up to 1024 bytes of data each time called and + * should be called multiple times to dump the entire HBA SLIM. + * + * Return Value: + * This routine returns the amount of bytes that were dumped into @buf and will + * not exceed @size. + **/ static int lpfc_debugfs_dumpHBASlim_data(struct lpfc_hba *phba, char *buf, int size) { @@ -342,6 +424,21 @@ lpfc_debugfs_dumpHBASlim_data(struct lpfc_hba *phba, char *buf, int size) return len; } +/** + * lpfc_debugfs_dumpHostSlim_data - Dump host SLIM info to a buffer. + * @phba: The HBA to gather Host SLIM info from. + * @buf: The buffer to dump log into. + * @size: The maximum amount of data to process. + * + * Description: + * This routine dumps the current contents of host SLIM for the host associated + * with @phba to @buf up to @size bytes of data. The dump will contain the + * Mailbox, PCB, Rings, and Registers that are located in host memory. + * + * Return Value: + * This routine returns the amount of bytes that were dumped into @buf and will + * not exceed @size. + **/ static int lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size) { @@ -430,6 +527,21 @@ lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size) return len; } +/** + * lpfc_debugfs_nodelist_data - Dump target node list to a buffer. + * @vport: The vport to gather target node info from. + * @buf: The buffer to dump log into. + * @size: The maximum amount of data to process. + * + * Description: + * This routine dumps the current target node list associated with @vport to + * @buf up to @size bytes of data. Each node entry in the dump will contain a + * node state, DID, WWPN, WWNN, RPI, flags, type, and other useful fields. + * + * Return Value: + * This routine returns the amount of bytes that were dumped into @buf and will + * not exceed @size. + **/ static int lpfc_debugfs_nodelist_data(struct lpfc_vport *vport, char *buf, int size) { @@ -513,7 +625,22 @@ lpfc_debugfs_nodelist_data(struct lpfc_vport *vport, char *buf, int size) } #endif - +/** + * lpfc_debugfs_disc_trc - Store discovery trace log. + * @vport: The vport to associate this trace string with for retrieval. + * @mask: Log entry classification. + * @fmt: Format string to be displayed when dumping the log. + * @data1: 1st data parameter to be applied to @fmt. + * @data2: 2nd data parameter to be applied to @fmt. + * @data3: 3rd data parameter to be applied to @fmt. + * + * Description: + * This routine is used by the driver code to add a debugfs log entry to the + * discovery trace buffer associated with @vport. Only entries with a @mask that + * match the current debugfs discovery mask will be saved. Entries that do not + * match will be thrown away. @fmt, @data1, @data2, and @data3 are used like + * printf when displaying the log. + **/ inline void lpfc_debugfs_disc_trc(struct lpfc_vport *vport, int mask, char *fmt, uint32_t data1, uint32_t data2, uint32_t data3) @@ -542,6 +669,19 @@ lpfc_debugfs_disc_trc(struct lpfc_vport *vport, int mask, char *fmt, return; } +/** + * lpfc_debugfs_slow_ring_trc - Store slow ring trace log. + * @phba: The phba to associate this trace string with for retrieval. + * @fmt: Format string to be displayed when dumping the log. + * @data1: 1st data parameter to be applied to @fmt. + * @data2: 2nd data parameter to be applied to @fmt. + * @data3: 3rd data parameter to be applied to @fmt. + * + * Description: + * This routine is used by the driver code to add a debugfs log entry to the + * discovery trace buffer associated with @vport. @fmt, @data1, @data2, and + * @data3 are used like printf when displaying the log. + **/ inline void lpfc_debugfs_slow_ring_trc(struct lpfc_hba *phba, char *fmt, uint32_t data1, uint32_t data2, uint32_t data3) @@ -568,6 +708,21 @@ lpfc_debugfs_slow_ring_trc(struct lpfc_hba *phba, char *fmt, } #ifdef CONFIG_LPFC_DEBUG_FS +/** + * lpfc_debugfs_disc_trc_open - Open the discovery trace log. + * @inode: The inode pointer that contains a vport pointer. + * @file: The file pointer to attach the log output. + * + * Description: + * This routine is the entry point for the debugfs open file operation. It gets + * the vport from the i_private field in @inode, allocates the necessary buffer + * for the log, fills the buffer from the in-memory log for this vport, and then + * returns a pointer to that log in the private_data field in @file. + * + * Returns: + * This function returns zero if successful. On error it will return an negative + * error value. + **/ static int lpfc_debugfs_disc_trc_open(struct inode *inode, struct file *file) { @@ -585,7 +740,7 @@ lpfc_debugfs_disc_trc_open(struct inode *inode, struct file *file) if (!debug) goto out; - /* Round to page boundry */ + /* Round to page boundary */ size = (lpfc_debugfs_max_disc_trc * LPFC_DEBUG_TRC_ENTRY_SIZE); size = PAGE_ALIGN(size); @@ -603,6 +758,21 @@ out: return rc; } +/** + * lpfc_debugfs_slow_ring_trc_open - Open the Slow Ring trace log. + * @inode: The inode pointer that contains a vport pointer. + * @file: The file pointer to attach the log output. + * + * Description: + * This routine is the entry point for the debugfs open file operation. It gets + * the vport from the i_private field in @inode, allocates the necessary buffer + * for the log, fills the buffer from the in-memory log for this vport, and then + * returns a pointer to that log in the private_data field in @file. + * + * Returns: + * This function returns zero if successful. On error it will return an negative + * error value. + **/ static int lpfc_debugfs_slow_ring_trc_open(struct inode *inode, struct file *file) { @@ -620,7 +790,7 @@ lpfc_debugfs_slow_ring_trc_open(struct inode *inode, struct file *file) if (!debug) goto out; - /* Round to page boundry */ + /* Round to page boundary */ size = (lpfc_debugfs_max_slow_ring_trc * LPFC_DEBUG_TRC_ENTRY_SIZE); size = PAGE_ALIGN(size); @@ -638,6 +808,21 @@ out: return rc; } +/** + * lpfc_debugfs_hbqinfo_open - Open the hbqinfo debugfs buffer. + * @inode: The inode pointer that contains a vport pointer. + * @file: The file pointer to attach the log output. + * + * Description: + * This routine is the entry point for the debugfs open file operation. It gets + * the vport from the i_private field in @inode, allocates the necessary buffer + * for the log, fills the buffer from the in-memory log for this vport, and then + * returns a pointer to that log in the private_data field in @file. + * + * Returns: + * This function returns zero if successful. On error it will return an negative + * error value. + **/ static int lpfc_debugfs_hbqinfo_open(struct inode *inode, struct file *file) { @@ -649,7 +834,7 @@ lpfc_debugfs_hbqinfo_open(struct inode *inode, struct file *file) if (!debug) goto out; - /* Round to page boundry */ + /* Round to page boundary */ debug->buffer = kmalloc(LPFC_HBQINFO_SIZE, GFP_KERNEL); if (!debug->buffer) { kfree(debug); @@ -665,6 +850,21 @@ out: return rc; } +/** + * lpfc_debugfs_dumpHBASlim_open - Open the Dump HBA SLIM debugfs buffer. + * @inode: The inode pointer that contains a vport pointer. + * @file: The file pointer to attach the log output. + * + * Description: + * This routine is the entry point for the debugfs open file operation. It gets + * the vport from the i_private field in @inode, allocates the necessary buffer + * for the log, fills the buffer from the in-memory log for this vport, and then + * returns a pointer to that log in the private_data field in @file. + * + * Returns: + * This function returns zero if successful. On error it will return an negative + * error value. + **/ static int lpfc_debugfs_dumpHBASlim_open(struct inode *inode, struct file *file) { @@ -676,7 +876,7 @@ lpfc_debugfs_dumpHBASlim_open(struct inode *inode, struct file *file) if (!debug) goto out; - /* Round to page boundry */ + /* Round to page boundary */ debug->buffer = kmalloc(LPFC_DUMPHBASLIM_SIZE, GFP_KERNEL); if (!debug->buffer) { kfree(debug); @@ -692,6 +892,21 @@ out: return rc; } +/** + * lpfc_debugfs_dumpHostSlim_open - Open the Dump Host SLIM debugfs buffer. + * @inode: The inode pointer that contains a vport pointer. + * @file: The file pointer to attach the log output. + * + * Description: + * This routine is the entry point for the debugfs open file operation. It gets + * the vport from the i_private field in @inode, allocates the necessary buffer + * for the log, fills the buffer from the in-memory log for this vport, and then + * returns a pointer to that log in the private_data field in @file. + * + * Returns: + * This function returns zero if successful. On error it will return an negative + * error value. + **/ static int lpfc_debugfs_dumpHostSlim_open(struct inode *inode, struct file *file) { @@ -703,7 +918,7 @@ lpfc_debugfs_dumpHostSlim_open(struct inode *inode, struct file *file) if (!debug) goto out; - /* Round to page boundry */ + /* Round to page boundary */ debug->buffer = kmalloc(LPFC_DUMPHOSTSLIM_SIZE, GFP_KERNEL); if (!debug->buffer) { kfree(debug); @@ -719,6 +934,21 @@ out: return rc; } +/** + * lpfc_debugfs_nodelist_open - Open the nodelist debugfs file. + * @inode: The inode pointer that contains a vport pointer. + * @file: The file pointer to attach the log output. + * + * Description: + * This routine is the entry point for the debugfs open file operation. It gets + * the vport from the i_private field in @inode, allocates the necessary buffer + * for the log, fills the buffer from the in-memory log for this vport, and then + * returns a pointer to that log in the private_data field in @file. + * + * Returns: + * This function returns zero if successful. On error it will return an negative + * error value. + **/ static int lpfc_debugfs_nodelist_open(struct inode *inode, struct file *file) { @@ -730,7 +960,7 @@ lpfc_debugfs_nodelist_open(struct inode *inode, struct file *file) if (!debug) goto out; - /* Round to page boundry */ + /* Round to page boundary */ debug->buffer = kmalloc(LPFC_NODELIST_SIZE, GFP_KERNEL); if (!debug->buffer) { kfree(debug); @@ -746,6 +976,23 @@ out: return rc; } +/** + * lpfc_debugfs_lseek - Seek through a debugfs file. + * @file: The file pointer to seek through. + * @off: The offset to seek to or the amount to seek by. + * @whence: Indicates how to seek. + * + * Description: + * This routine is the entry point for the debugfs lseek file operation. The + * @whence parameter indicates whether @off is the offset to directly seek to, + * or if it is a value to seek forward or reverse by. This function figures out + * what the new offset of the debugfs file will be and assigns that value to the + * f_pos field of @file. + * + * Returns: + * This function returns the new offset if successful and returns a negative + * error if unable to process the seek. + **/ static loff_t lpfc_debugfs_lseek(struct file *file, loff_t off, int whence) { @@ -767,6 +1014,22 @@ lpfc_debugfs_lseek(struct file *file, loff_t off, int whence) return (pos < 0 || pos > debug->len) ? -EINVAL : (file->f_pos = pos); } +/** + * lpfc_debugfs_read - Read a debugfs file. + * @file: The file pointer to read from. + * @buf: The buffer to copy the data to. + * @nbytes: The number of bytes to read. + * @ppos: The position in the file to start reading from. + * + * Description: + * This routine reads data from from the buffer indicated in the private_data + * field of @file. It will start reading at @ppos and copy up to @nbytes of + * data to @buf. + * + * Returns: + * This function returns the amount of data that was read (this could be less + * than @nbytes if the end of the file was reached) or a negative error value. + **/ static ssize_t lpfc_debugfs_read(struct file *file, char __user *buf, size_t nbytes, loff_t *ppos) @@ -776,6 +1039,18 @@ lpfc_debugfs_read(struct file *file, char __user *buf, debug->len); } +/** + * lpfc_debugfs_release - Release the buffer used to store debugfs file data. + * @inode: The inode pointer that contains a vport pointer. (unused) + * @file: The file pointer that contains the buffer to release. + * + * Description: + * This routine frees the buffer that was allocated when the debugfs file was + * opened. + * + * Returns: + * This function returns zero. + **/ static int lpfc_debugfs_release(struct inode *inode, struct file *file) { @@ -845,6 +1120,16 @@ static struct dentry *lpfc_debugfs_root = NULL; static atomic_t lpfc_debugfs_hba_count; #endif +/** + * lpfc_debugfs_initialize - Initialize debugfs for a vport. + * @vport: The vport pointer to initialize. + * + * Description: + * When Debugfs is configured this routine sets up the lpfc debugfs file system. + * If not already created, this routine will create the lpfc directory, and + * lpfcX directory (for this HBA), and vportX directory for this vport. It will + * also create each file used to access lpfc specific debugfs information. + **/ inline void lpfc_debugfs_initialize(struct lpfc_vport *vport) { @@ -1033,7 +1318,17 @@ debug_failed: #endif } - +/** + * lpfc_debugfs_terminate - Tear down debugfs infrastructure for this vport. + * @vport: The vport pointer to remove from debugfs. + * + * Description: + * When Debugfs is configured this routine removes debugfs file system elements + * that are specific to this vport. It also checks to see if there are any + * users left for the debugfs directories associated with the HBA and driver. If + * this is the last user of the HBA directory or driver directory then it will + * remove those from the debugfs infrastructure as well. + **/ inline void lpfc_debugfs_terminate(struct lpfc_vport *vport) { @@ -1096,5 +1391,3 @@ lpfc_debugfs_terminate(struct lpfc_vport *vport) #endif return; } - - diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index f54e0f7eaee..43049b9d64c 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -53,6 +53,28 @@ static void lpfc_register_new_vport(struct lpfc_hba *phba, static int lpfc_max_els_tries = 3; +/** + * lpfc_els_chk_latt: Check host link attention event for a vport. + * @vport: pointer to a host virtual N_Port data structure. + * + * This routine checks whether there is an outstanding host link + * attention event during the discovery process with the @vport. It is done + * by reading the HBA's Host Attention (HA) register. If there is any host + * link attention events during this @vport's discovery process, the @vport + * shall be marked as FC_ABORT_DISCOVERY, a host link attention clear shall + * be issued if the link state is not already in host link cleared state, + * and a return code shall indicate whether the host link attention event + * had happened. + * + * Note that, if either the host link is in state LPFC_LINK_DOWN or @vport + * state in LPFC_VPORT_READY, the request for checking host link attention + * event will be ignored and a return code shall indicate no host link + * attention event had happened. + * + * Return codes + * 0 - no host link attention event happened + * 1 - host link attention event happened + **/ int lpfc_els_chk_latt(struct lpfc_vport *vport) { @@ -92,6 +114,34 @@ lpfc_els_chk_latt(struct lpfc_vport *vport) return 1; } +/** + * lpfc_prep_els_iocb: Allocate and prepare a lpfc iocb data structure. + * @vport: pointer to a host virtual N_Port data structure. + * @expectRsp: flag indicating whether response is expected. + * @cmdSize: size of the ELS command. + * @retry: number of retries to the command IOCB when it fails. + * @ndlp: pointer to a node-list data structure. + * @did: destination identifier. + * @elscmd: the ELS command code. + * + * This routine is used for allocating a lpfc-IOCB data structure from + * the driver lpfc-IOCB free-list and prepare the IOCB with the parameters + * passed into the routine for discovery state machine to issue an Extended + * Link Service (ELS) commands. It is a generic lpfc-IOCB allocation + * and preparation routine that is used by all the discovery state machine + * routines and the ELS command-specific fields will be later set up by + * the individual discovery machine routines after calling this routine + * allocating and preparing a generic IOCB data structure. It fills in the + * Buffer Descriptor Entries (BDEs), allocates buffers for both command + * payload and response payload (if expected). The reference count on the + * ndlp is incremented by 1 and the reference to the ndlp is put into + * context1 of the IOCB data structure for this IOCB to hold the ndlp + * reference for the command's callback function to access later. + * + * Return code + * Pointer to the newly allocated/prepared els iocb data structure + * NULL - when els iocb data structure allocation/preparation failed + **/ static struct lpfc_iocbq * lpfc_prep_els_iocb(struct lpfc_vport *vport, uint8_t expectRsp, uint16_t cmdSize, uint8_t retry, @@ -233,6 +283,22 @@ els_iocb_free_pcmb_exit: return NULL; } +/** + * lpfc_issue_fabric_reglogin: Issue fabric registration login for a vport. + * @vport: pointer to a host virtual N_Port data structure. + * + * This routine issues a fabric registration login for a @vport. An + * active ndlp node with Fabric_DID must already exist for this @vport. + * The routine invokes two mailbox commands to carry out fabric registration + * login through the HBA firmware: the first mailbox command requests the + * HBA to perform link configuration for the @vport; and the second mailbox + * command requests the HBA to perform the actual fabric registration login + * with the @vport. + * + * Return code + * 0 - successfully issued fabric registration login for @vport + * -ENXIO -- failed to issue fabric registration login for @vport + **/ static int lpfc_issue_fabric_reglogin(struct lpfc_vport *vport) { @@ -313,6 +379,26 @@ fail: return -ENXIO; } +/** + * lpfc_cmpl_els_flogi_fabric: Completion function for flogi to a fabric port. + * @vport: pointer to a host virtual N_Port data structure. + * @ndlp: pointer to a node-list data structure. + * @sp: pointer to service parameter data structure. + * @irsp: pointer to the IOCB within the lpfc response IOCB. + * + * This routine is invoked by the lpfc_cmpl_els_flogi() completion callback + * function to handle the completion of a Fabric Login (FLOGI) into a fabric + * port in a fabric topology. It properly sets up the parameters to the @ndlp + * from the IOCB response. It also check the newly assigned N_Port ID to the + * @vport against the previously assigned N_Port ID. If it is different from + * the previously assigned Destination ID (DID), the lpfc_unreg_rpi() routine + * is invoked on all the remaining nodes with the @vport to unregister the + * Remote Port Indicators (RPIs). Finally, the lpfc_issue_fabric_reglogin() + * is invoked to register login to the fabric. + * + * Return code + * 0 - Success (currently, always return 0) + **/ static int lpfc_cmpl_els_flogi_fabric(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, struct serv_parm *sp, IOCB_t *irsp) @@ -416,9 +502,26 @@ lpfc_cmpl_els_flogi_fabric(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, return 0; } -/* - * We FLOGIed into an NPort, initiate pt2pt protocol - */ +/** + * lpfc_cmpl_els_flogi_nport: Completion function for flogi to an N_Port. + * @vport: pointer to a host virtual N_Port data structure. + * @ndlp: pointer to a node-list data structure. + * @sp: pointer to service parameter data structure. + * + * This routine is invoked by the lpfc_cmpl_els_flogi() completion callback + * function to handle the completion of a Fabric Login (FLOGI) into an N_Port + * in a point-to-point topology. First, the @vport's N_Port Name is compared + * with the received N_Port Name: if the @vport's N_Port Name is greater than + * the received N_Port Name lexicographically, this node shall assign local + * N_Port ID (PT2PT_LocalID: 1) and remote N_Port ID (PT2PT_RemoteID: 2) and + * will send out Port Login (PLOGI) with the N_Port IDs assigned. Otherwise, + * this node shall just wait for the remote node to issue PLOGI and assign + * N_Port IDs. + * + * Return code + * 0 - Success + * -ENXIO - Fail + **/ static int lpfc_cmpl_els_flogi_nport(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, struct serv_parm *sp) @@ -516,6 +619,29 @@ fail: return -ENXIO; } +/** + * lpfc_cmpl_els_flogi: Completion callback function for flogi. + * @phba: pointer to lpfc hba data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @rspiocb: pointer to lpfc response iocb data structure. + * + * This routine is the top-level completion callback function for issuing + * a Fabric Login (FLOGI) command. If the response IOCB reported error, + * the lpfc_els_retry() routine shall be invoked to retry the FLOGI. If + * retry has been made (either immediately or delayed with lpfc_els_retry() + * returning 1), the command IOCB will be released and function returned. + * If the retry attempt has been given up (possibly reach the maximum + * number of retries), one additional decrement of ndlp reference shall be + * invoked before going out after releasing the command IOCB. This will + * actually release the remote node (Note, lpfc_els_free_iocb() will also + * invoke one decrement of ndlp reference count). If no error reported in + * the IOCB status, the command Port ID field is used to determine whether + * this is a point-to-point topology or a fabric topology: if the Port ID + * field is assigned, it is a fabric topology; otherwise, it is a + * point-to-point topology. The routine lpfc_cmpl_els_flogi_fabric() or + * lpfc_cmpl_els_flogi_nport() shall be invoked accordingly to handle the + * specific topology completion conditions. + **/ static void lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_iocbq *rspiocb) @@ -618,6 +744,28 @@ out: lpfc_els_free_iocb(phba, cmdiocb); } +/** + * lpfc_issue_els_flogi: Issue an flogi iocb command for a vport. + * @vport: pointer to a host virtual N_Port data structure. + * @ndlp: pointer to a node-list data structure. + * @retry: number of retries to the command IOCB. + * + * This routine issues a Fabric Login (FLOGI) Request ELS command + * for a @vport. The initiator service parameters are put into the payload + * of the FLOGI Request IOCB and the top-level callback function pointer + * to lpfc_cmpl_els_flogi() routine is put to the IOCB completion callback + * function field. The lpfc_issue_fabric_iocb routine is invoked to send + * out FLOGI ELS command with one outstanding fabric IOCB at a time. + * + * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp + * will be incremented by 1 for holding the ndlp and the reference to ndlp + * will be stored into the context1 field of the IOCB for the completion + * callback function to the FLOGI ELS command. + * + * Return code + * 0 - successfully issued flogi iocb for @vport + * 1 - failed to issue flogi iocb for @vport + **/ static int lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, uint8_t retry) @@ -694,6 +842,20 @@ lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, return 0; } +/** + * lpfc_els_abort_flogi: Abort all outstanding flogi iocbs. + * @phba: pointer to lpfc hba data structure. + * + * This routine aborts all the outstanding Fabric Login (FLOGI) IOCBs + * with a @phba. This routine walks all the outstanding IOCBs on the txcmplq + * list and issues an abort IOCB commond on each outstanding IOCB that + * contains a active Fabric_DID ndlp. Note that this function is to issue + * the abort IOCB command on all the outstanding IOCBs, thus when this + * function returns, it does not guarantee all the IOCBs are actually aborted. + * + * Return code + * 0 - Sucessfully issued abort iocb on all outstanding flogis (Always 0) + **/ int lpfc_els_abort_flogi(struct lpfc_hba *phba) { @@ -729,6 +891,22 @@ lpfc_els_abort_flogi(struct lpfc_hba *phba) return 0; } +/** + * lpfc_initial_flogi: Issue an initial fabric login for a vport. + * @vport: pointer to a host virtual N_Port data structure. + * + * This routine issues an initial Fabric Login (FLOGI) for the @vport + * specified. It first searches the ndlp with the Fabric_DID (0xfffffe) from + * the @vport's ndlp list. If no such ndlp found, it will create an ndlp and + * put it into the @vport's ndlp list. If an inactive ndlp found on the list, + * it will just be enabled and made active. The lpfc_issue_els_flogi() routine + * is then invoked with the @vport and the ndlp to perform the FLOGI for the + * @vport. + * + * Return code + * 0 - failed to issue initial flogi for @vport + * 1 - successfully issued initial flogi for @vport + **/ int lpfc_initial_flogi(struct lpfc_vport *vport) { @@ -764,6 +942,22 @@ lpfc_initial_flogi(struct lpfc_vport *vport) return 1; } +/** + * lpfc_initial_fdisc: Issue an initial fabric discovery for a vport. + * @vport: pointer to a host virtual N_Port data structure. + * + * This routine issues an initial Fabric Discover (FDISC) for the @vport + * specified. It first searches the ndlp with the Fabric_DID (0xfffffe) from + * the @vport's ndlp list. If no such ndlp found, it will create an ndlp and + * put it into the @vport's ndlp list. If an inactive ndlp found on the list, + * it will just be enabled and made active. The lpfc_issue_els_fdisc() routine + * is then invoked with the @vport and the ndlp to perform the FDISC for the + * @vport. + * + * Return code + * 0 - failed to issue initial fdisc for @vport + * 1 - successfully issued initial fdisc for @vport + **/ int lpfc_initial_fdisc(struct lpfc_vport *vport) { @@ -797,6 +991,17 @@ lpfc_initial_fdisc(struct lpfc_vport *vport) return 1; } +/** + * lpfc_more_plogi: Check and issue remaining plogis for a vport. + * @vport: pointer to a host virtual N_Port data structure. + * + * This routine checks whether there are more remaining Port Logins + * (PLOGI) to be issued for the @vport. If so, it will invoke the routine + * lpfc_els_disc_plogi() to go through the Node Port Recovery (NPR) nodes + * to issue ELS PLOGIs up to the configured discover threads with the + * @vport (@vport->cfg_discovery_threads). The function also decrement + * the @vport's num_disc_node by 1 if it is not already 0. + **/ void lpfc_more_plogi(struct lpfc_vport *vport) { @@ -819,6 +1024,37 @@ lpfc_more_plogi(struct lpfc_vport *vport) return; } +/** + * lpfc_plogi_confirm_nport: Confirm pologi wwpn matches stored ndlp. + * @phba: pointer to lpfc hba data structure. + * @prsp: pointer to response IOCB payload. + * @ndlp: pointer to a node-list data structure. + * + * This routine checks and indicates whether the WWPN of an N_Port, retrieved + * from a PLOGI, matches the WWPN that is stored in the @ndlp for that N_POrt. + * The following cases are considered N_Port confirmed: + * 1) The N_Port is a Fabric ndlp; 2) The @ndlp is on vport list and matches + * the WWPN of the N_Port logged into; 3) The @ndlp is not on vport list but + * it does not have WWPN assigned either. If the WWPN is confirmed, the + * pointer to the @ndlp will be returned. If the WWPN is not confirmed: + * 1) if there is a node on vport list other than the @ndlp with the same + * WWPN of the N_Port PLOGI logged into, the lpfc_unreg_rpi() will be invoked + * on that node to release the RPI associated with the node; 2) if there is + * no node found on vport list with the same WWPN of the N_Port PLOGI logged + * into, a new node shall be allocated (or activated). In either case, the + * parameters of the @ndlp shall be copied to the new_ndlp, the @ndlp shall + * be released and the new_ndlp shall be put on to the vport node list and + * its pointer returned as the confirmed node. + * + * Note that before the @ndlp got "released", the keepDID from not-matching + * or inactive "new_ndlp" on the vport node list is assigned to the nlp_DID + * of the @ndlp. This is because the release of @ndlp is actually to put it + * into an inactive state on the vport node list and the vport node list + * management algorithm does not allow two node with a same DID. + * + * Return code + * pointer to the PLOGI N_Port @ndlp + **/ static struct lpfc_nodelist * lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp, struct lpfc_nodelist *ndlp) @@ -922,6 +1158,17 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp, return new_ndlp; } +/** + * lpfc_end_rscn: Check and handle more rscn for a vport. + * @vport: pointer to a host virtual N_Port data structure. + * + * This routine checks whether more Registration State Change + * Notifications (RSCNs) came in while the discovery state machine was in + * the FC_RSCN_MODE. If so, the lpfc_els_handle_rscn() routine will be + * invoked to handle the additional RSCNs for the @vport. Otherwise, the + * FC_RSCN_MODE bit will be cleared with the @vport to mark as the end of + * handling the RSCNs. + **/ void lpfc_end_rscn(struct lpfc_vport *vport) { @@ -943,6 +1190,26 @@ lpfc_end_rscn(struct lpfc_vport *vport) } } +/** + * lpfc_cmpl_els_plogi: Completion callback function for plogi. + * @phba: pointer to lpfc hba data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @rspiocb: pointer to lpfc response iocb data structure. + * + * This routine is the completion callback function for issuing the Port + * Login (PLOGI) command. For PLOGI completion, there must be an active + * ndlp on the vport node list that matches the remote node ID from the + * PLOGI reponse IOCB. If such ndlp does not exist, the PLOGI is simply + * ignored and command IOCB released. The PLOGI response IOCB status is + * checked for error conditons. If there is error status reported, PLOGI + * retry shall be attempted by invoking the lpfc_els_retry() routine. + * Otherwise, the lpfc_plogi_confirm_nport() routine shall be invoked on + * the ndlp and the NLP_EVT_CMPL_PLOGI state to the Discover State Machine + * (DSM) is set for this PLOGI completion. Finally, it checks whether + * there are additional N_Port nodes with the vport that need to perform + * PLOGI. If so, the lpfc_more_plogi() routine is invoked to issue addition + * PLOGIs. + **/ static void lpfc_cmpl_els_plogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_iocbq *rspiocb) @@ -1048,6 +1315,27 @@ out: return; } +/** + * lpfc_issue_els_plogi: Issue an plogi iocb command for a vport. + * @vport: pointer to a host virtual N_Port data structure. + * @did: destination port identifier. + * @retry: number of retries to the command IOCB. + * + * This routine issues a Port Login (PLOGI) command to a remote N_Port + * (with the @did) for a @vport. Before issuing a PLOGI to a remote N_Port, + * the ndlp with the remote N_Port DID must exist on the @vport's ndlp list. + * This routine constructs the proper feilds of the PLOGI IOCB and invokes + * the lpfc_sli_issue_iocb() routine to send out PLOGI ELS command. + * + * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp + * will be incremented by 1 for holding the ndlp and the reference to ndlp + * will be stored into the context1 field of the IOCB for the completion + * callback function to the PLOGI ELS command. + * + * Return code + * 0 - Successfully issued a plogi for @vport + * 1 - failed to issue a plogi for @vport + **/ int lpfc_issue_els_plogi(struct lpfc_vport *vport, uint32_t did, uint8_t retry) { @@ -1106,6 +1394,19 @@ lpfc_issue_els_plogi(struct lpfc_vport *vport, uint32_t did, uint8_t retry) return 0; } +/** + * lpfc_cmpl_els_prli: Completion callback function for prli. + * @phba: pointer to lpfc hba data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @rspiocb: pointer to lpfc response iocb data structure. + * + * This routine is the completion callback function for a Process Login + * (PRLI) ELS command. The PRLI response IOCB status is checked for error + * status. If there is error status reported, PRLI retry shall be attempted + * by invoking the lpfc_els_retry() routine. Otherwise, the state + * NLP_EVT_CMPL_PRLI is sent to the Discover State Machine (DSM) for this + * ndlp to mark the PRLI completion. + **/ static void lpfc_cmpl_els_prli(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_iocbq *rspiocb) @@ -1164,6 +1465,27 @@ out: return; } +/** + * lpfc_issue_els_prli: Issue a prli iocb command for a vport. + * @vport: pointer to a host virtual N_Port data structure. + * @ndlp: pointer to a node-list data structure. + * @retry: number of retries to the command IOCB. + * + * This routine issues a Process Login (PRLI) ELS command for the + * @vport. The PRLI service parameters are set up in the payload of the + * PRLI Request command and the pointer to lpfc_cmpl_els_prli() routine + * is put to the IOCB completion callback func field before invoking the + * routine lpfc_sli_issue_iocb() to send out PRLI command. + * + * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp + * will be incremented by 1 for holding the ndlp and the reference to ndlp + * will be stored into the context1 field of the IOCB for the completion + * callback function to the PRLI ELS command. + * + * Return code + * 0 - successfully issued prli iocb command for @vport + * 1 - failed to issue prli iocb command for @vport + **/ int lpfc_issue_els_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, uint8_t retry) @@ -1233,6 +1555,15 @@ lpfc_issue_els_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, return 0; } +/** + * lpfc_more_adisc: Issue more adisc as needed. + * @vport: pointer to a host virtual N_Port data structure. + * + * This routine determines whether there are more ndlps on a @vport + * node list need to have Address Discover (ADISC) issued. If so, it will + * invoke the lpfc_els_disc_adisc() routine to issue ADISC on the @vport's + * remaining nodes which need to have ADISC sent. + **/ void lpfc_more_adisc(struct lpfc_vport *vport) { @@ -1255,6 +1586,18 @@ lpfc_more_adisc(struct lpfc_vport *vport) return; } +/** + * lpfc_rscn_disc: Perform rscn discovery for a vport. + * @vport: pointer to a host virtual N_Port data structure. + * + * This routine performs Registration State Change Notification (RSCN) + * discovery for a @vport. If the @vport's node port recovery count is not + * zero, it will invoke the lpfc_els_disc_plogi() to perform PLOGI for all + * the nodes that need recovery. If none of the PLOGI were needed through + * the lpfc_els_disc_plogi() routine, the lpfc_end_rscn() routine shall be + * invoked to check and handle possible more RSCN came in during the period + * of processing the current ones. + **/ static void lpfc_rscn_disc(struct lpfc_vport *vport) { @@ -1269,6 +1612,22 @@ lpfc_rscn_disc(struct lpfc_vport *vport) lpfc_end_rscn(vport); } +/** + * lpfc_cmpl_els_adisc: Completion callback function for adisc. + * @phba: pointer to lpfc hba data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @rspiocb: pointer to lpfc response iocb data structure. + * + * This routine is the completion function for issuing the Address Discover + * (ADISC) command. It first checks to see whether link went down during + * the discovery process. If so, the node will be marked as node port + * recovery for issuing discover IOCB by the link attention handler and + * exit. Otherwise, the response status is checked. If error was reported + * in the response status, the ADISC command shall be retried by invoking + * the lpfc_els_retry() routine. Otherwise, if no error was reported in + * the response status, the state machine is invoked to set transition + * with respect to NLP_EVT_CMPL_ADISC event. + **/ static void lpfc_cmpl_els_adisc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_iocbq *rspiocb) @@ -1384,6 +1743,26 @@ out: return; } +/** + * lpfc_issue_els_adisc: Issue an address discover iocb to an node on a vport. + * @vport: pointer to a virtual N_Port data structure. + * @ndlp: pointer to a node-list data structure. + * @retry: number of retries to the command IOCB. + * + * This routine issues an Address Discover (ADISC) for an @ndlp on a + * @vport. It prepares the payload of the ADISC ELS command, updates the + * and states of the ndlp, and invokes the lpfc_sli_issue_iocb() routine + * to issue the ADISC ELS command. + * + * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp + * will be incremented by 1 for holding the ndlp and the reference to ndlp + * will be stored into the context1 field of the IOCB for the completion + * callback function to the ADISC ELS command. + * + * Return code + * 0 - successfully issued adisc + * 1 - failed to issue adisc + **/ int lpfc_issue_els_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, uint8_t retry) @@ -1437,6 +1816,18 @@ lpfc_issue_els_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, return 0; } +/** + * lpfc_cmpl_els_logo: Completion callback function for logo. + * @phba: pointer to lpfc hba data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @rspiocb: pointer to lpfc response iocb data structure. + * + * This routine is the completion function for issuing the ELS Logout (LOGO) + * command. If no error status was reported from the LOGO response, the + * state machine of the associated ndlp shall be invoked for transition with + * respect to NLP_EVT_CMPL_LOGO event. Otherwise, if error status was reported, + * the lpfc_els_retry() routine will be invoked to retry the LOGO command. + **/ static void lpfc_cmpl_els_logo(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_iocbq *rspiocb) @@ -1502,6 +1893,26 @@ out: return; } +/** + * lpfc_issue_els_logo: Issue a logo to an node on a vport. + * @vport: pointer to a virtual N_Port data structure. + * @ndlp: pointer to a node-list data structure. + * @retry: number of retries to the command IOCB. + * + * This routine constructs and issues an ELS Logout (LOGO) iocb command + * to a remote node, referred by an @ndlp on a @vport. It constructs the + * payload of the IOCB, properly sets up the @ndlp state, and invokes the + * lpfc_sli_issue_iocb() routine to send out the LOGO ELS command. + * + * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp + * will be incremented by 1 for holding the ndlp and the reference to ndlp + * will be stored into the context1 field of the IOCB for the completion + * callback function to the LOGO ELS command. + * + * Return code + * 0 - successfully issued logo + * 1 - failed to issue logo + **/ int lpfc_issue_els_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, uint8_t retry) @@ -1563,6 +1974,22 @@ lpfc_issue_els_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, return 0; } +/** + * lpfc_cmpl_els_cmd: Completion callback function for generic els command. + * @phba: pointer to lpfc hba data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @rspiocb: pointer to lpfc response iocb data structure. + * + * This routine is a generic completion callback function for ELS commands. + * Specifically, it is the callback function which does not need to perform + * any command specific operations. It is currently used by the ELS command + * issuing routines for the ELS State Change Request (SCR), + * lpfc_issue_els_scr(), and the ELS Fibre Channel Address Resolution + * Protocol Response (FARPR) routine, lpfc_issue_els_farpr(). Other than + * certain debug loggings, this callback function simply invokes the + * lpfc_els_chk_latt() routine to check whether link went down during the + * discovery process. + **/ static void lpfc_cmpl_els_cmd(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_iocbq *rspiocb) @@ -1587,6 +2014,28 @@ lpfc_cmpl_els_cmd(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, return; } +/** + * lpfc_issue_els_scr: Issue a scr to an node on a vport. + * @vport: pointer to a host virtual N_Port data structure. + * @nportid: N_Port identifier to the remote node. + * @retry: number of retries to the command IOCB. + * + * This routine issues a State Change Request (SCR) to a fabric node + * on a @vport. The remote node @nportid is passed into the function. It + * first search the @vport node list to find the matching ndlp. If no such + * ndlp is found, a new ndlp shall be created for this (SCR) purpose. An + * IOCB is allocated, payload prepared, and the lpfc_sli_issue_iocb() + * routine is invoked to send the SCR IOCB. + * + * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp + * will be incremented by 1 for holding the ndlp and the reference to ndlp + * will be stored into the context1 field of the IOCB for the completion + * callback function to the SCR ELS command. + * + * Return code + * 0 - Successfully issued scr command + * 1 - Failed to issue scr command + **/ int lpfc_issue_els_scr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry) { @@ -1659,6 +2108,28 @@ lpfc_issue_els_scr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry) return 0; } +/** + * lpfc_issue_els_farpr: Issue a farp to an node on a vport. + * @vport: pointer to a host virtual N_Port data structure. + * @nportid: N_Port identifier to the remote node. + * @retry: number of retries to the command IOCB. + * + * This routine issues a Fibre Channel Address Resolution Response + * (FARPR) to a node on a vport. The remote node N_Port identifier (@nportid) + * is passed into the function. It first search the @vport node list to find + * the matching ndlp. If no such ndlp is found, a new ndlp shall be created + * for this (FARPR) purpose. An IOCB is allocated, payload prepared, and the + * lpfc_sli_issue_iocb() routine is invoked to send the FARPR ELS command. + * + * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp + * will be incremented by 1 for holding the ndlp and the reference to ndlp + * will be stored into the context1 field of the IOCB for the completion + * callback function to the PARPR ELS command. + * + * Return code + * 0 - Successfully issued farpr command + * 1 - Failed to issue farpr command + **/ static int lpfc_issue_els_farpr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry) { @@ -1748,6 +2219,18 @@ lpfc_issue_els_farpr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry) return 0; } +/** + * lpfc_cancel_retry_delay_tmo: Cancel the timer with delayed iocb-cmd retry. + * @vport: pointer to a host virtual N_Port data structure. + * @nlp: pointer to a node-list data structure. + * + * This routine cancels the timer with a delayed IOCB-command retry for + * a @vport's @ndlp. It stops the timer for the delayed function retrial and + * removes the ELS retry event if it presents. In addition, if the + * NLP_NPR_2B_DISC bit is set in the @nlp's nlp_flag bitmap, ADISC IOCB + * commands are sent for the @vport's nodes that require issuing discovery + * ADISC. + **/ void lpfc_cancel_retry_delay_tmo(struct lpfc_vport *vport, struct lpfc_nodelist *nlp) { @@ -1794,6 +2277,20 @@ lpfc_cancel_retry_delay_tmo(struct lpfc_vport *vport, struct lpfc_nodelist *nlp) return; } +/** + * lpfc_els_retry_delay: Timer function with a ndlp delayed function timer. + * @ptr: holder for the pointer to the timer function associated data (ndlp). + * + * This routine is invoked by the ndlp delayed-function timer to check + * whether there is any pending ELS retry event(s) with the node. If not, it + * simply returns. Otherwise, if there is at least one ELS delayed event, it + * adds the delayed events to the HBA work list and invokes the + * lpfc_worker_wake_up() routine to wake up worker thread to process the + * event. Note that lpfc_nlp_get() is called before posting the event to + * the work list to hold reference count of ndlp so that it guarantees the + * reference to ndlp will still be available when the worker thread gets + * to the event associated with the ndlp. + **/ void lpfc_els_retry_delay(unsigned long ptr) { @@ -1822,6 +2319,15 @@ lpfc_els_retry_delay(unsigned long ptr) return; } +/** + * lpfc_els_retry_delay_handler: Work thread handler for ndlp delayed function. + * @ndlp: pointer to a node-list data structure. + * + * This routine is the worker-thread handler for processing the @ndlp delayed + * event(s), posted by the lpfc_els_retry_delay() routine. It simply retrieves + * the last ELS command from the associated ndlp and invokes the proper ELS + * function according to the delayed ELS command to retry the command. + **/ void lpfc_els_retry_delay_handler(struct lpfc_nodelist *ndlp) { @@ -1884,6 +2390,27 @@ lpfc_els_retry_delay_handler(struct lpfc_nodelist *ndlp) return; } +/** + * lpfc_els_retry: Make retry decision on an els command iocb. + * @phba: pointer to lpfc hba data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @rspiocb: pointer to lpfc response iocb data structure. + * + * This routine makes a retry decision on an ELS command IOCB, which has + * failed. The following ELS IOCBs use this function for retrying the command + * when previously issued command responsed with error status: FLOGI, PLOGI, + * PRLI, ADISC, LOGO, and FDISC. Based on the ELS command type and the + * returned error status, it makes the decision whether a retry shall be + * issued for the command, and whether a retry shall be made immediately or + * delayed. In the former case, the corresponding ELS command issuing-function + * is called to retry the command. In the later case, the ELS command shall + * be posted to the ndlp delayed event and delayed function timer set to the + * ndlp for the delayed command issusing. + * + * Return code + * 0 - No retry of els command is made + * 1 - Immediate or delayed retry of els command is made + **/ static int lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_iocbq *rspiocb) @@ -2182,12 +2709,26 @@ lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, return 0; } +/** + * lpfc_els_free_data: Free lpfc dma buffer and data structure with an iocb. + * @phba: pointer to lpfc hba data structure. + * @buf_ptr1: pointer to the lpfc DMA buffer data structure. + * + * This routine releases the lpfc DMA (Direct Memory Access) buffer(s) + * associated with a command IOCB back to the lpfc DMA buffer pool. It first + * checks to see whether there is a lpfc DMA buffer associated with the + * response of the command IOCB. If so, it will be released before releasing + * the lpfc DMA buffer associated with the IOCB itself. + * + * Return code + * 0 - Successfully released lpfc DMA buffer (currently, always return 0) + **/ static int lpfc_els_free_data(struct lpfc_hba *phba, struct lpfc_dmabuf *buf_ptr1) { struct lpfc_dmabuf *buf_ptr; - /* Free the response before processing the command. */ + /* Free the response before processing the command. */ if (!list_empty(&buf_ptr1->list)) { list_remove_head(&buf_ptr1->list, buf_ptr, struct lpfc_dmabuf, @@ -2200,6 +2741,18 @@ lpfc_els_free_data(struct lpfc_hba *phba, struct lpfc_dmabuf *buf_ptr1) return 0; } +/** + * lpfc_els_free_bpl: Free lpfc dma buffer and data structure with bpl. + * @phba: pointer to lpfc hba data structure. + * @buf_ptr: pointer to the lpfc dma buffer data structure. + * + * This routine releases the lpfc Direct Memory Access (DMA) buffer + * associated with a Buffer Pointer List (BPL) back to the lpfc DMA buffer + * pool. + * + * Return code + * 0 - Successfully released lpfc DMA buffer (currently, always return 0) + **/ static int lpfc_els_free_bpl(struct lpfc_hba *phba, struct lpfc_dmabuf *buf_ptr) { @@ -2208,6 +2761,33 @@ lpfc_els_free_bpl(struct lpfc_hba *phba, struct lpfc_dmabuf *buf_ptr) return 0; } +/** + * lpfc_els_free_iocb: Free a command iocb and its associated resources. + * @phba: pointer to lpfc hba data structure. + * @elsiocb: pointer to lpfc els command iocb data structure. + * + * This routine frees a command IOCB and its associated resources. The + * command IOCB data structure contains the reference to various associated + * resources, these fields must be set to NULL if the associated reference + * not present: + * context1 - reference to ndlp + * context2 - reference to cmd + * context2->next - reference to rsp + * context3 - reference to bpl + * + * It first properly decrements the reference count held on ndlp for the + * IOCB completion callback function. If LPFC_DELAY_MEM_FREE flag is not + * set, it invokes the lpfc_els_free_data() routine to release the Direct + * Memory Access (DMA) buffers associated with the IOCB. Otherwise, it + * adds the DMA buffer the @phba data structure for the delayed release. + * If reference to the Buffer Pointer List (BPL) is present, the + * lpfc_els_free_bpl() routine is invoked to release the DMA memory + * associated with BPL. Finally, the lpfc_sli_release_iocbq() routine is + * invoked to release the IOCB data structure back to @phba IOCBQ list. + * + * Return code + * 0 - Success (currently, always return 0) + **/ int lpfc_els_free_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *elsiocb) { @@ -2274,6 +2854,23 @@ lpfc_els_free_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *elsiocb) return 0; } +/** + * lpfc_cmpl_els_logo_acc: Completion callback function to logo acc response. + * @phba: pointer to lpfc hba data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @rspiocb: pointer to lpfc response iocb data structure. + * + * This routine is the completion callback function to the Logout (LOGO) + * Accept (ACC) Response ELS command. This routine is invoked to indicate + * the completion of the LOGO process. It invokes the lpfc_nlp_not_used() to + * release the ndlp if it has the last reference remaining (reference count + * is 1). If succeeded (meaning ndlp released), it sets the IOCB context1 + * field to NULL to inform the following lpfc_els_free_iocb() routine no + * ndlp reference count needs to be decremented. Otherwise, the ndlp + * reference use-count shall be decremented by the lpfc_els_free_iocb() + * routine. Finally, the lpfc_els_free_iocb() is invoked to release the + * IOCB data structure. + **/ static void lpfc_cmpl_els_logo_acc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_iocbq *rspiocb) @@ -2311,6 +2908,19 @@ lpfc_cmpl_els_logo_acc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, return; } +/** + * lpfc_mbx_cmpl_dflt_rpi: Completion callbk func for unreg dflt rpi mbox cmd. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * This routine is the completion callback function for unregister default + * RPI (Remote Port Index) mailbox command to the @phba. It simply releases + * the associated lpfc Direct Memory Access (DMA) buffer back to the pool and + * decrements the ndlp reference count held for this completion callback + * function. After that, it invokes the lpfc_nlp_not_used() to check + * whether there is only one reference left on the ndlp. If so, it will + * perform one more decrement and trigger the release of the ndlp. + **/ void lpfc_mbx_cmpl_dflt_rpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) { @@ -2332,6 +2942,22 @@ lpfc_mbx_cmpl_dflt_rpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) return; } +/** + * lpfc_cmpl_els_rsp: Completion callback function for els response iocb cmd. + * @phba: pointer to lpfc hba data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @rspiocb: pointer to lpfc response iocb data structure. + * + * This routine is the completion callback function for ELS Response IOCB + * command. In normal case, this callback function just properly sets the + * nlp_flag bitmap in the ndlp data structure, if the mbox command reference + * field in the command IOCB is not NULL, the referred mailbox command will + * be send out, and then invokes the lpfc_els_free_iocb() routine to release + * the IOCB. Under error conditions, such as when a LS_RJT is returned or a + * link down event occurred during the discovery, the lpfc_nlp_not_used() + * routine shall be invoked trying to release the ndlp if no other threads + * are currently referring it. + **/ static void lpfc_cmpl_els_rsp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_iocbq *rspiocb) @@ -2487,6 +3113,31 @@ out: return; } +/** + * lpfc_els_rsp_acc: Prepare and issue an acc response iocb command. + * @vport: pointer to a host virtual N_Port data structure. + * @flag: the els command code to be accepted. + * @oldiocb: pointer to the original lpfc command iocb data structure. + * @ndlp: pointer to a node-list data structure. + * @mbox: pointer to the driver internal queue element for mailbox command. + * + * This routine prepares and issues an Accept (ACC) response IOCB + * command. It uses the @flag to properly set up the IOCB field for the + * specific ACC response command to be issued and invokes the + * lpfc_sli_issue_iocb() routine to send out ACC response IOCB. If a + * @mbox pointer is passed in, it will be put into the context_un.mbox + * field of the IOCB for the completion callback function to issue the + * mailbox command to the HBA later when callback is invoked. + * + * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp + * will be incremented by 1 for holding the ndlp and the reference to ndlp + * will be stored into the context1 field of the IOCB for the completion + * callback function to the corresponding response ELS IOCB command. + * + * Return code + * 0 - Successfully issued acc response + * 1 - Failed to issue acc response + **/ int lpfc_els_rsp_acc(struct lpfc_vport *vport, uint32_t flag, struct lpfc_iocbq *oldiocb, struct lpfc_nodelist *ndlp, @@ -2601,6 +3252,28 @@ lpfc_els_rsp_acc(struct lpfc_vport *vport, uint32_t flag, return 0; } +/** + * lpfc_els_rsp_reject: Propare and issue a rjt response iocb command. + * @vport: pointer to a virtual N_Port data structure. + * @rejectError: + * @oldiocb: pointer to the original lpfc command iocb data structure. + * @ndlp: pointer to a node-list data structure. + * @mbox: pointer to the driver internal queue element for mailbox command. + * + * This routine prepares and issue an Reject (RJT) response IOCB + * command. If a @mbox pointer is passed in, it will be put into the + * context_un.mbox field of the IOCB for the completion callback function + * to issue to the HBA later. + * + * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp + * will be incremented by 1 for holding the ndlp and the reference to ndlp + * will be stored into the context1 field of the IOCB for the completion + * callback function to the reject response ELS IOCB command. + * + * Return code + * 0 - Successfully issued reject response + * 1 - Failed to issue reject response + **/ int lpfc_els_rsp_reject(struct lpfc_vport *vport, uint32_t rejectError, struct lpfc_iocbq *oldiocb, struct lpfc_nodelist *ndlp, @@ -2660,6 +3333,25 @@ lpfc_els_rsp_reject(struct lpfc_vport *vport, uint32_t rejectError, return 0; } +/** + * lpfc_els_rsp_adisc_acc: Prepare and issue acc response to adisc iocb cmd. + * @vport: pointer to a virtual N_Port data structure. + * @oldiocb: pointer to the original lpfc command iocb data structure. + * @ndlp: pointer to a node-list data structure. + * + * This routine prepares and issues an Accept (ACC) response to Address + * Discover (ADISC) ELS command. It simply prepares the payload of the IOCB + * and invokes the lpfc_sli_issue_iocb() routine to send out the command. + * + * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp + * will be incremented by 1 for holding the ndlp and the reference to ndlp + * will be stored into the context1 field of the IOCB for the completion + * callback function to the ADISC Accept response ELS IOCB command. + * + * Return code + * 0 - Successfully issued acc adisc response + * 1 - Failed to issue adisc acc response + **/ int lpfc_els_rsp_adisc_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb, struct lpfc_nodelist *ndlp) @@ -2716,6 +3408,25 @@ lpfc_els_rsp_adisc_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb, return 0; } +/** + * lpfc_els_rsp_prli_acc: Prepare and issue acc response to prli iocb cmd. + * @vport: pointer to a virtual N_Port data structure. + * @oldiocb: pointer to the original lpfc command iocb data structure. + * @ndlp: pointer to a node-list data structure. + * + * This routine prepares and issues an Accept (ACC) response to Process + * Login (PRLI) ELS command. It simply prepares the payload of the IOCB + * and invokes the lpfc_sli_issue_iocb() routine to send out the command. + * + * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp + * will be incremented by 1 for holding the ndlp and the reference to ndlp + * will be stored into the context1 field of the IOCB for the completion + * callback function to the PRLI Accept response ELS IOCB command. + * + * Return code + * 0 - Successfully issued acc prli response + * 1 - Failed to issue acc prli response + **/ int lpfc_els_rsp_prli_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb, struct lpfc_nodelist *ndlp) @@ -2795,6 +3506,32 @@ lpfc_els_rsp_prli_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb, return 0; } +/** + * lpfc_els_rsp_rnid_acc: Issue rnid acc response iocb command. + * @vport: pointer to a virtual N_Port data structure. + * @format: rnid command format. + * @oldiocb: pointer to the original lpfc command iocb data structure. + * @ndlp: pointer to a node-list data structure. + * + * This routine issues a Request Node Identification Data (RNID) Accept + * (ACC) response. It constructs the RNID ACC response command according to + * the proper @format and then calls the lpfc_sli_issue_iocb() routine to + * issue the response. Note that this command does not need to hold the ndlp + * reference count for the callback. So, the ndlp reference count taken by + * the lpfc_prep_els_iocb() routine is put back and the context1 field of + * IOCB is set to NULL to indicate to the lpfc_els_free_iocb() routine that + * there is no ndlp reference available. + * + * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp + * will be incremented by 1 for holding the ndlp and the reference to ndlp + * will be stored into the context1 field of the IOCB for the completion + * callback function. However, for the RNID Accept Response ELS command, + * this is undone later by this routine after the IOCB is allocated. + * + * Return code + * 0 - Successfully issued acc rnid response + * 1 - Failed to issue acc rnid response + **/ static int lpfc_els_rsp_rnid_acc(struct lpfc_vport *vport, uint8_t format, struct lpfc_iocbq *oldiocb, struct lpfc_nodelist *ndlp) @@ -2875,6 +3612,25 @@ lpfc_els_rsp_rnid_acc(struct lpfc_vport *vport, uint8_t format, return 0; } +/** + * lpfc_els_disc_adisc: Issue remaining adisc iocbs to npr nodes of a vport. + * @vport: pointer to a host virtual N_Port data structure. + * + * This routine issues Address Discover (ADISC) ELS commands to those + * N_Ports which are in node port recovery state and ADISC has not been issued + * for the @vport. Each time an ELS ADISC IOCB is issued by invoking the + * lpfc_issue_els_adisc() routine, the per @vport number of discover count + * (num_disc_nodes) shall be incremented. If the num_disc_nodes reaches a + * pre-configured threshold (cfg_discovery_threads), the @vport fc_flag will + * be marked with FC_NLP_MORE bit and the process of issuing remaining ADISC + * IOCBs quit for later pick up. On the other hand, after walking through + * all the ndlps with the @vport and there is none ADISC IOCB issued, the + * @vport fc_flag shall be cleared with FC_NLP_MORE bit indicating there is + * no more ADISC need to be sent. + * + * Return code + * The number of N_Ports with adisc issued. + **/ int lpfc_els_disc_adisc(struct lpfc_vport *vport) { @@ -2914,6 +3670,25 @@ lpfc_els_disc_adisc(struct lpfc_vport *vport) return sentadisc; } +/** + * lpfc_els_disc_plogi: Issue plogi for all npr nodes of a vport before adisc. + * @vport: pointer to a host virtual N_Port data structure. + * + * This routine issues Port Login (PLOGI) ELS commands to all the N_Ports + * which are in node port recovery state, with a @vport. Each time an ELS + * ADISC PLOGI IOCB is issued by invoking the lpfc_issue_els_plogi() routine, + * the per @vport number of discover count (num_disc_nodes) shall be + * incremented. If the num_disc_nodes reaches a pre-configured threshold + * (cfg_discovery_threads), the @vport fc_flag will be marked with FC_NLP_MORE + * bit set and quit the process of issuing remaining ADISC PLOGIN IOCBs for + * later pick up. On the other hand, after walking through all the ndlps with + * the @vport and there is none ADISC PLOGI IOCB issued, the @vport fc_flag + * shall be cleared with the FC_NLP_MORE bit indicating there is no more ADISC + * PLOGI need to be sent. + * + * Return code + * The number of N_Ports with plogi issued. + **/ int lpfc_els_disc_plogi(struct lpfc_vport *vport) { @@ -2954,6 +3729,15 @@ lpfc_els_disc_plogi(struct lpfc_vport *vport) return sentplogi; } +/** + * lpfc_els_flush_rscn: Clean up any rscn activities with a vport. + * @vport: pointer to a host virtual N_Port data structure. + * + * This routine cleans up any Registration State Change Notification + * (RSCN) activity with a @vport. Note that the fc_rscn_flush flag of the + * @vport together with the host_lock is used to prevent multiple thread + * trying to access the RSCN array on a same @vport at the same time. + **/ void lpfc_els_flush_rscn(struct lpfc_vport *vport) { @@ -2984,6 +3768,18 @@ lpfc_els_flush_rscn(struct lpfc_vport *vport) vport->fc_rscn_flush = 0; } +/** + * lpfc_rscn_payload_check: Check whether there is a pending rscn to a did. + * @vport: pointer to a host virtual N_Port data structure. + * @did: remote destination port identifier. + * + * This routine checks whether there is any pending Registration State + * Configuration Notification (RSCN) to a @did on @vport. + * + * Return code + * None zero - The @did matched with a pending rscn + * 0 - not able to match @did with a pending rscn + **/ int lpfc_rscn_payload_check(struct lpfc_vport *vport, uint32_t did) { @@ -3053,6 +3849,17 @@ return_did_out: return did; } +/** + * lpfc_rscn_recovery_check: Send recovery event to vport nodes matching rscn + * @vport: pointer to a host virtual N_Port data structure. + * + * This routine sends recovery (NLP_EVT_DEVICE_RECOVERY) event to the + * state machine for a @vport's nodes that are with pending RSCN (Registration + * State Change Notification). + * + * Return code + * 0 - Successful (currently alway return 0) + **/ static int lpfc_rscn_recovery_check(struct lpfc_vport *vport) { @@ -3071,6 +3878,28 @@ lpfc_rscn_recovery_check(struct lpfc_vport *vport) return 0; } +/** + * lpfc_els_rcv_rscn: Process an unsolicited rscn iocb. + * @vport: pointer to a host virtual N_Port data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @ndlp: pointer to a node-list data structure. + * + * This routine processes an unsolicited RSCN (Registration State Change + * Notification) IOCB. First, the payload of the unsolicited RSCN is walked + * to invoke fc_host_post_event() routine to the FC transport layer. If the + * discover state machine is about to begin discovery, it just accepts the + * RSCN and the discovery process will satisfy the RSCN. If this RSCN only + * contains N_Port IDs for other vports on this HBA, it just accepts the + * RSCN and ignore processing it. If the state machine is in the recovery + * state, the fc_rscn_id_list of this @vport is walked and the + * lpfc_rscn_recovery_check() routine is invoked to send recovery event for + * all nodes that match RSCN payload. Otherwise, the lpfc_els_handle_rscn() + * routine is invoked to handle the RSCN event. + * + * Return code + * 0 - Just sent the acc response + * 1 - Sent the acc response and waited for name server completion + **/ static int lpfc_els_rcv_rscn(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, struct lpfc_nodelist *ndlp) @@ -3241,6 +4070,22 @@ lpfc_els_rcv_rscn(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, return lpfc_els_handle_rscn(vport); } +/** + * lpfc_els_handle_rscn: Handle rscn for a vport. + * @vport: pointer to a host virtual N_Port data structure. + * + * This routine handles the Registration State Configuration Notification + * (RSCN) for a @vport. If login to NameServer does not exist, a new ndlp shall + * be created and a Port Login (PLOGI) to the NameServer is issued. Otherwise, + * if the ndlp to NameServer exists, a Common Transport (CT) command to the + * NameServer shall be issued. If CT command to the NameServer fails to be + * issued, the lpfc_els_flush_rscn() routine shall be invoked to clean up any + * RSCN activities with the @vport. + * + * Return code + * 0 - Cleaned up rscn on the @vport + * 1 - Wait for plogi to name server before proceed + **/ int lpfc_els_handle_rscn(struct lpfc_vport *vport) { @@ -3313,6 +4158,31 @@ lpfc_els_handle_rscn(struct lpfc_vport *vport) return 0; } +/** + * lpfc_els_rcv_flogi: Process an unsolicited flogi iocb. + * @vport: pointer to a host virtual N_Port data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @ndlp: pointer to a node-list data structure. + * + * This routine processes Fabric Login (FLOGI) IOCB received as an ELS + * unsolicited event. An unsolicited FLOGI can be received in a point-to- + * point topology. As an unsolicited FLOGI should not be received in a loop + * mode, any unsolicited FLOGI received in loop mode shall be ignored. The + * lpfc_check_sparm() routine is invoked to check the parameters in the + * unsolicited FLOGI. If parameters validation failed, the routine + * lpfc_els_rsp_reject() shall be called with reject reason code set to + * LSEXP_SPARM_OPTIONS to reject the FLOGI. Otherwise, the Port WWN in the + * FLOGI shall be compared with the Port WWN of the @vport to determine who + * will initiate PLOGI. The higher lexicographical value party shall has + * higher priority (as the winning port) and will initiate PLOGI and + * communicate Port_IDs (Addresses) for both nodes in PLOGI. The result + * of this will be marked in the @vport fc_flag field with FC_PT2PT_PLOGI + * and then the lpfc_els_rsp_acc() routine is invoked to accept the FLOGI. + * + * Return code + * 0 - Successfully processed the unsolicited flogi + * 1 - Failed to process the unsolicited flogi + **/ static int lpfc_els_rcv_flogi(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, struct lpfc_nodelist *ndlp) @@ -3402,6 +4272,22 @@ lpfc_els_rcv_flogi(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, return 0; } +/** + * lpfc_els_rcv_rnid: Process an unsolicited rnid iocb. + * @vport: pointer to a host virtual N_Port data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @ndlp: pointer to a node-list data structure. + * + * This routine processes Request Node Identification Data (RNID) IOCB + * received as an ELS unsolicited event. Only when the RNID specified format + * 0x0 or 0xDF (Topology Discovery Specific Node Identification Data) + * present, this routine will invoke the lpfc_els_rsp_rnid_acc() routine to + * Accept (ACC) the RNID ELS command. All the other RNID formats are + * rejected by invoking the lpfc_els_rsp_reject() routine. + * + * Return code + * 0 - Successfully processed rnid iocb (currently always return 0) + **/ static int lpfc_els_rcv_rnid(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, struct lpfc_nodelist *ndlp) @@ -3441,6 +4327,19 @@ lpfc_els_rcv_rnid(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, return 0; } +/** + * lpfc_els_rcv_lirr: Process an unsolicited lirr iocb. + * @vport: pointer to a host virtual N_Port data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @ndlp: pointer to a node-list data structure. + * + * This routine processes a Link Incident Report Registration(LIRR) IOCB + * received as an ELS unsolicited event. Currently, this function just invokes + * the lpfc_els_rsp_reject() routine to reject the LIRR IOCB unconditionally. + * + * Return code + * 0 - Successfully processed lirr iocb (currently always return 0) + **/ static int lpfc_els_rcv_lirr(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, struct lpfc_nodelist *ndlp) @@ -3456,6 +4355,25 @@ lpfc_els_rcv_lirr(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, return 0; } +/** + * lpfc_els_rsp_rps_acc: Completion callbk func for MBX_READ_LNK_STAT mbox cmd. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * This routine is the completion callback function for the MBX_READ_LNK_STAT + * mailbox command. This callback function is to actually send the Accept + * (ACC) response to a Read Port Status (RPS) unsolicited IOCB event. It + * collects the link statistics from the completion of the MBX_READ_LNK_STAT + * mailbox command, constructs the RPS response with the link statistics + * collected, and then invokes the lpfc_sli_issue_iocb() routine to send ACC + * response to the RPS. + * + * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp + * will be incremented by 1 for holding the ndlp and the reference to ndlp + * will be stored into the context1 field of the IOCB for the completion + * callback function to the RPS Accept Response ELS IOCB command. + * + **/ static void lpfc_els_rsp_rps_acc(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) { @@ -3531,6 +4449,24 @@ lpfc_els_rsp_rps_acc(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) return; } +/** + * lpfc_els_rcv_rps: Process an unsolicited rps iocb. + * @vport: pointer to a host virtual N_Port data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @ndlp: pointer to a node-list data structure. + * + * This routine processes Read Port Status (RPS) IOCB received as an + * ELS unsolicited event. It first checks the remote port state. If the + * remote port is not in NLP_STE_UNMAPPED_NODE state or NLP_STE_MAPPED_NODE + * state, it invokes the lpfc_els_rsp_reject() routine to send the reject + * response. Otherwise, it issue the MBX_READ_LNK_STAT mailbox command + * for reading the HBA link statistics. It is for the callback function, + * lpfc_els_rsp_rps_acc(), set to the MBX_READ_LNK_STAT mailbox command + * to actually sending out RPS Accept (ACC) response. + * + * Return codes + * 0 - Successfully processed rps iocb (currently always return 0) + **/ static int lpfc_els_rcv_rps(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, struct lpfc_nodelist *ndlp) @@ -3592,6 +4528,25 @@ lpfc_els_rcv_rps(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, return 0; } +/** + * lpfc_els_rsp_rpl_acc: Issue an accept rpl els command. + * @vport: pointer to a host virtual N_Port data structure. + * @cmdsize: size of the ELS command. + * @oldiocb: pointer to the original lpfc command iocb data structure. + * @ndlp: pointer to a node-list data structure. + * + * This routine issuees an Accept (ACC) Read Port List (RPL) ELS command. + * It is to be called by the lpfc_els_rcv_rpl() routine to accept the RPL. + * + * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp + * will be incremented by 1 for holding the ndlp and the reference to ndlp + * will be stored into the context1 field of the IOCB for the completion + * callback function to the RPL Accept Response ELS command. + * + * Return code + * 0 - Successfully issued ACC RPL ELS command + * 1 - Failed to issue ACC RPL ELS command + **/ static int lpfc_els_rsp_rpl_acc(struct lpfc_vport *vport, uint16_t cmdsize, struct lpfc_iocbq *oldiocb, struct lpfc_nodelist *ndlp) @@ -3645,6 +4600,22 @@ lpfc_els_rsp_rpl_acc(struct lpfc_vport *vport, uint16_t cmdsize, return 0; } +/** + * lpfc_els_rcv_rpl: Process an unsolicited rpl iocb. + * @vport: pointer to a host virtual N_Port data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @ndlp: pointer to a node-list data structure. + * + * This routine processes Read Port List (RPL) IOCB received as an ELS + * unsolicited event. It first checks the remote port state. If the remote + * port is not in NLP_STE_UNMAPPED_NODE and NLP_STE_MAPPED_NODE states, it + * invokes the lpfc_els_rsp_reject() routine to send reject response. + * Otherwise, this routine then invokes the lpfc_els_rsp_rpl_acc() routine + * to accept the RPL. + * + * Return code + * 0 - Successfully processed rpl iocb (currently always return 0) + **/ static int lpfc_els_rcv_rpl(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, struct lpfc_nodelist *ndlp) @@ -3685,6 +4656,30 @@ lpfc_els_rcv_rpl(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, return 0; } +/** + * lpfc_els_rcv_farp: Process an unsolicited farp request els command. + * @vport: pointer to a virtual N_Port data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @ndlp: pointer to a node-list data structure. + * + * This routine processes Fibre Channel Address Resolution Protocol + * (FARP) Request IOCB received as an ELS unsolicited event. Currently, + * the lpfc driver only supports matching on WWPN or WWNN for FARP. As such, + * FARP_MATCH_PORT flag and FARP_MATCH_NODE flag are checked against the + * Match Flag in the FARP request IOCB: if FARP_MATCH_PORT flag is set, the + * remote PortName is compared against the FC PortName stored in the @vport + * data structure; if FARP_MATCH_NODE flag is set, the remote NodeName is + * compared against the FC NodeName stored in the @vport data structure. + * If any of these matches and the FARP_REQUEST_FARPR flag is set in the + * FARP request IOCB Response Flag, the lpfc_issue_els_farpr() routine is + * invoked to send out FARP Response to the remote node. Before sending the + * FARP Response, however, the FARP_REQUEST_PLOGI flag is check in the FARP + * request IOCB Response Flag and, if it is set, the lpfc_issue_els_plogi() + * routine is invoked to log into the remote port first. + * + * Return code + * 0 - Either the FARP Match Mode not supported or successfully processed + **/ static int lpfc_els_rcv_farp(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, struct lpfc_nodelist *ndlp) @@ -3744,6 +4739,20 @@ lpfc_els_rcv_farp(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, return 0; } +/** + * lpfc_els_rcv_farpr: Process an unsolicited farp response iocb. + * @vport: pointer to a host virtual N_Port data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @ndlp: pointer to a node-list data structure. + * + * This routine processes Fibre Channel Address Resolution Protocol + * Response (FARPR) IOCB received as an ELS unsolicited event. It simply + * invokes the lpfc_els_rsp_acc() routine to the remote node to accept + * the FARP response request. + * + * Return code + * 0 - Successfully processed FARPR IOCB (currently always return 0) + **/ static int lpfc_els_rcv_farpr(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, struct lpfc_nodelist *ndlp) @@ -3768,6 +4777,25 @@ lpfc_els_rcv_farpr(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, return 0; } +/** + * lpfc_els_rcv_fan: Process an unsolicited fan iocb command. + * @vport: pointer to a host virtual N_Port data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @fan_ndlp: pointer to a node-list data structure. + * + * This routine processes a Fabric Address Notification (FAN) IOCB + * command received as an ELS unsolicited event. The FAN ELS command will + * only be processed on a physical port (i.e., the @vport represents the + * physical port). The fabric NodeName and PortName from the FAN IOCB are + * compared against those in the phba data structure. If any of those is + * different, the lpfc_initial_flogi() routine is invoked to initialize + * Fabric Login (FLOGI) to the fabric to start the discover over. Otherwise, + * if both of those are identical, the lpfc_issue_fabric_reglogin() routine + * is invoked to register login to the fabric. + * + * Return code + * 0 - Successfully processed fan iocb (currently always return 0). + **/ static int lpfc_els_rcv_fan(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, struct lpfc_nodelist *fan_ndlp) @@ -3797,6 +4825,16 @@ lpfc_els_rcv_fan(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, return 0; } +/** + * lpfc_els_timeout: Handler funciton to the els timer. + * @ptr: holder for the timer function associated data. + * + * This routine is invoked by the ELS timer after timeout. It posts the ELS + * timer timeout event by setting the WORKER_ELS_TMO bit to the work port + * event bitmap and then invokes the lpfc_worker_wake_up() routine to wake + * up the worker thread. It is for the worker thread to invoke the routine + * lpfc_els_timeout_handler() to work on the posted event WORKER_ELS_TMO. + **/ void lpfc_els_timeout(unsigned long ptr) { @@ -3816,6 +4854,15 @@ lpfc_els_timeout(unsigned long ptr) return; } +/** + * lpfc_els_timeout_handler: Process an els timeout event. + * @vport: pointer to a virtual N_Port data structure. + * + * This routine is the actual handler function that processes an ELS timeout + * event. It walks the ELS ring to get and abort all the IOCBs (except the + * ABORT/CLOSE/FARP/FARPR/FDISC), which are associated with the @vport by + * invoking the lpfc_sli_issue_abort_iotag() routine. + **/ void lpfc_els_timeout_handler(struct lpfc_vport *vport) { @@ -3886,6 +4933,26 @@ lpfc_els_timeout_handler(struct lpfc_vport *vport) mod_timer(&vport->els_tmofunc, jiffies + HZ * timeout); } +/** + * lpfc_els_flush_cmd: Clean up the outstanding els commands to a vport. + * @vport: pointer to a host virtual N_Port data structure. + * + * This routine is used to clean up all the outstanding ELS commands on a + * @vport. It first aborts the @vport by invoking lpfc_fabric_abort_vport() + * routine. After that, it walks the ELS transmit queue to remove all the + * IOCBs with the @vport other than the QUE_RING and ABORT/CLOSE IOCBs. For + * the IOCBs with a non-NULL completion callback function, the callback + * function will be invoked with the status set to IOSTAT_LOCAL_REJECT and + * un.ulpWord[4] set to IOERR_SLI_ABORTED. For IOCBs with a NULL completion + * callback function, the IOCB will simply be released. Finally, it walks + * the ELS transmit completion queue to issue an abort IOCB to any transmit + * completion queue IOCB that is associated with the @vport and is not + * an IOCB from libdfc (i.e., the management plane IOCBs that are not + * part of the discovery state machine) out to HBA by invoking the + * lpfc_sli_issue_abort_iotag() routine. Note that this function issues the + * abort IOCB to any transmit completion queueed IOCB, it does not guarantee + * the IOCBs are aborted when this function returns. + **/ void lpfc_els_flush_cmd(struct lpfc_vport *vport) { @@ -3948,6 +5015,23 @@ lpfc_els_flush_cmd(struct lpfc_vport *vport) return; } +/** + * lpfc_els_flush_all_cmd: Clean up all the outstanding els commands to a HBA. + * @phba: pointer to lpfc hba data structure. + * + * This routine is used to clean up all the outstanding ELS commands on a + * @phba. It first aborts the @phba by invoking the lpfc_fabric_abort_hba() + * routine. After that, it walks the ELS transmit queue to remove all the + * IOCBs to the @phba other than the QUE_RING and ABORT/CLOSE IOCBs. For + * the IOCBs with the completion callback function associated, the callback + * function will be invoked with the status set to IOSTAT_LOCAL_REJECT and + * un.ulpWord[4] set to IOERR_SLI_ABORTED. For IOCBs without the completion + * callback function associated, the IOCB will simply be released. Finally, + * it walks the ELS transmit completion queue to issue an abort IOCB to any + * transmit completion queue IOCB that is not an IOCB from libdfc (i.e., the + * management plane IOCBs that are not part of the discovery state machine) + * out to HBA by invoking the lpfc_sli_issue_abort_iotag() routine. + **/ void lpfc_els_flush_all_cmd(struct lpfc_hba *phba) { @@ -3992,6 +5076,20 @@ lpfc_els_flush_all_cmd(struct lpfc_hba *phba) return; } +/** + * lpfc_els_unsol_buffer: Process an unsolicited event data buffer. + * @phba: pointer to lpfc hba data structure. + * @pring: pointer to a SLI ring. + * @vport: pointer to a host virtual N_Port data structure. + * @elsiocb: pointer to lpfc els command iocb data structure. + * + * This routine is used for processing the IOCB associated with a unsolicited + * event. It first determines whether there is an existing ndlp that matches + * the DID from the unsolicited IOCB. If not, it will create a new one with + * the DID from the unsolicited IOCB. The ELS command from the unsolicited + * IOCB is then used to invoke the proper routine and to set up proper state + * of the discovery state machine. + **/ static void lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, struct lpfc_vport *vport, struct lpfc_iocbq *elsiocb) @@ -4282,6 +5380,19 @@ dropit: phba->fc_stat.elsRcvDrop++; } +/** + * lpfc_find_vport_by_vpid: Find a vport on a HBA through vport identifier. + * @phba: pointer to lpfc hba data structure. + * @vpi: host virtual N_Port identifier. + * + * This routine finds a vport on a HBA (referred by @phba) through a + * @vpi. The function walks the HBA's vport list and returns the address + * of the vport with the matching @vpi. + * + * Return code + * NULL - No vport with the matching @vpi found + * Otherwise - Address to the vport with the matching @vpi. + **/ static struct lpfc_vport * lpfc_find_vport_by_vpid(struct lpfc_hba *phba, uint16_t vpi) { @@ -4299,6 +5410,18 @@ lpfc_find_vport_by_vpid(struct lpfc_hba *phba, uint16_t vpi) return NULL; } +/** + * lpfc_els_unsol_event: Process an unsolicited event from an els sli ring. + * @phba: pointer to lpfc hba data structure. + * @pring: pointer to a SLI ring. + * @elsiocb: pointer to lpfc els iocb data structure. + * + * This routine is used to process an unsolicited event received from a SLI + * (Service Level Interface) ring. The actual processing of the data buffer + * associated with the unsolicited event is done by invoking the routine + * lpfc_els_unsol_buffer() after properly set up the iocb buffer from the + * SLI ring on which the unsolicited event was received. + **/ void lpfc_els_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, struct lpfc_iocbq *elsiocb) @@ -4376,6 +5499,19 @@ lpfc_els_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } } +/** + * lpfc_do_scr_ns_plogi: Issue a plogi to the name server for scr. + * @phba: pointer to lpfc hba data structure. + * @vport: pointer to a virtual N_Port data structure. + * + * This routine issues a Port Login (PLOGI) to the Name Server with + * State Change Request (SCR) for a @vport. This routine will create an + * ndlp for the Name Server associated to the @vport if such node does + * not already exist. The PLOGI to Name Server is issued by invoking the + * lpfc_issue_els_plogi() routine. If Fabric-Device Management Interface + * (FDMI) is configured to the @vport, a FDMI node will be created and + * the PLOGI to FDMI is issued by invoking lpfc_issue_els_plogi() routine. + **/ void lpfc_do_scr_ns_plogi(struct lpfc_hba *phba, struct lpfc_vport *vport) { @@ -4434,6 +5570,18 @@ lpfc_do_scr_ns_plogi(struct lpfc_hba *phba, struct lpfc_vport *vport) return; } +/** + * lpfc_cmpl_reg_new_vport: Completion callback function to register new vport. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * This routine is the completion callback function to register new vport + * mailbox command. If the new vport mailbox command completes successfully, + * the fabric registration login shall be performed on physical port (the + * new vport created is actually a physical port, with VPI 0) or the port + * login to Name Server for State Change Request (SCR) will be performed + * on virtual port (real virtual port, with VPI greater than 0). + **/ static void lpfc_cmpl_reg_new_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) { @@ -4491,6 +5639,15 @@ lpfc_cmpl_reg_new_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) return; } +/** + * lpfc_register_new_vport: Register a new vport with a HBA. + * @phba: pointer to lpfc hba data structure. + * @vport: pointer to a host virtual N_Port data structure. + * @ndlp: pointer to a node-list data structure. + * + * This routine registers the @vport as a new virtual port with a HBA. + * It is done through a registering vpi mailbox command. + **/ static void lpfc_register_new_vport(struct lpfc_hba *phba, struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) @@ -4531,6 +5688,26 @@ mbox_err_exit: return; } +/** + * lpfc_cmpl_els_fdisc: Completion function for fdisc iocb command. + * @phba: pointer to lpfc hba data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @rspiocb: pointer to lpfc response iocb data structure. + * + * This routine is the completion callback function to a Fabric Discover + * (FDISC) ELS command. Since all the FDISC ELS commands are issued + * single threaded, each FDISC completion callback function will reset + * the discovery timer for all vports such that the timers will not get + * unnecessary timeout. The function checks the FDISC IOCB status. If error + * detected, the vport will be set to FC_VPORT_FAILED state. Otherwise,the + * vport will set to FC_VPORT_ACTIVE state. It then checks whether the DID + * assigned to the vport has been changed with the completion of the FDISC + * command. If so, both RPI (Remote Port Index) and VPI (Virtual Port Index) + * are unregistered from the HBA, and then the lpfc_register_new_vport() + * routine is invoked to register new vport with the HBA. Otherwise, the + * lpfc_do_scr_ns_plogi() routine is invoked to issue a PLOGI to the Name + * Server for State Change Request (SCR). + **/ static void lpfc_cmpl_els_fdisc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_iocbq *rspiocb) @@ -4617,6 +5794,26 @@ out: lpfc_els_free_iocb(phba, cmdiocb); } +/** + * lpfc_issue_els_fdisc: Issue a fdisc iocb command. + * @vport: pointer to a virtual N_Port data structure. + * @ndlp: pointer to a node-list data structure. + * @retry: number of retries to the command IOCB. + * + * This routine prepares and issues a Fabric Discover (FDISC) IOCB to + * a remote node (@ndlp) off a @vport. It uses the lpfc_issue_fabric_iocb() + * routine to issue the IOCB, which makes sure only one outstanding fabric + * IOCB will be sent off HBA at any given time. + * + * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp + * will be incremented by 1 for holding the ndlp and the reference to ndlp + * will be stored into the context1 field of the IOCB for the completion + * callback function to the FDISC ELS command. + * + * Return code + * 0 - Successfully issued fdisc iocb command + * 1 - Failed to issue fdisc iocb command + **/ static int lpfc_issue_els_fdisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, uint8_t retry) @@ -4691,6 +5888,20 @@ lpfc_issue_els_fdisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, return 0; } +/** + * lpfc_cmpl_els_npiv_logo: Completion function with vport logo. + * @phba: pointer to lpfc hba data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @rspiocb: pointer to lpfc response iocb data structure. + * + * This routine is the completion callback function to the issuing of a LOGO + * ELS command off a vport. It frees the command IOCB and then decrement the + * reference count held on ndlp for this completion function, indicating that + * the reference to the ndlp is no long needed. Note that the + * lpfc_els_free_iocb() routine decrements the ndlp reference held for this + * callback function and an additional explicit ndlp reference decrementation + * will trigger the actual release of the ndlp. + **/ static void lpfc_cmpl_els_npiv_logo(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_iocbq *rspiocb) @@ -4712,6 +5923,22 @@ lpfc_cmpl_els_npiv_logo(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, lpfc_nlp_put(ndlp); } +/** + * lpfc_issue_els_npiv_logo: Issue a logo off a vport. + * @vport: pointer to a virtual N_Port data structure. + * @ndlp: pointer to a node-list data structure. + * + * This routine issues a LOGO ELS command to an @ndlp off a @vport. + * + * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp + * will be incremented by 1 for holding the ndlp and the reference to ndlp + * will be stored into the context1 field of the IOCB for the completion + * callback function to the LOGO ELS command. + * + * Return codes + * 0 - Successfully issued logo off the @vport + * 1 - Failed to issue logo off the @vport + **/ int lpfc_issue_els_npiv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) { @@ -4757,6 +5984,17 @@ lpfc_issue_els_npiv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) return 0; } +/** + * lpfc_fabric_block_timeout: Handler function to the fabric block timer. + * @ptr: holder for the timer function associated data. + * + * This routine is invoked by the fabric iocb block timer after + * timeout. It posts the fabric iocb block timeout event by setting the + * WORKER_FABRIC_BLOCK_TMO bit to work port event bitmap and then invokes + * lpfc_worker_wake_up() routine to wake up the worker thread. It is for + * the worker thread to invoke the lpfc_unblock_fabric_iocbs() on the + * posted event WORKER_FABRIC_BLOCK_TMO. + **/ void lpfc_fabric_block_timeout(unsigned long ptr) { @@ -4775,6 +6013,16 @@ lpfc_fabric_block_timeout(unsigned long ptr) return; } +/** + * lpfc_resume_fabric_iocbs: Issue a fabric iocb from driver internal list. + * @phba: pointer to lpfc hba data structure. + * + * This routine issues one fabric iocb from the driver internal list to + * the HBA. It first checks whether it's ready to issue one fabric iocb to + * the HBA (whether there is no outstanding fabric iocb). If so, it shall + * remove one pending fabric iocb from the driver internal list and invokes + * lpfc_sli_issue_iocb() routine to send the fabric iocb to the HBA. + **/ static void lpfc_resume_fabric_iocbs(struct lpfc_hba *phba) { @@ -4824,6 +6072,15 @@ repeat: return; } +/** + * lpfc_unblock_fabric_iocbs: Unblock issuing fabric iocb command. + * @phba: pointer to lpfc hba data structure. + * + * This routine unblocks the issuing fabric iocb command. The function + * will clear the fabric iocb block bit and then invoke the routine + * lpfc_resume_fabric_iocbs() to issue one of the pending fabric iocb + * from the driver internal fabric iocb list. + **/ void lpfc_unblock_fabric_iocbs(struct lpfc_hba *phba) { @@ -4833,6 +6090,15 @@ lpfc_unblock_fabric_iocbs(struct lpfc_hba *phba) return; } +/** + * lpfc_block_fabric_iocbs: Block issuing fabric iocb command. + * @phba: pointer to lpfc hba data structure. + * + * This routine blocks the issuing fabric iocb for a specified amount of + * time (currently 100 ms). This is done by set the fabric iocb block bit + * and set up a timeout timer for 100ms. When the block bit is set, no more + * fabric iocb will be issued out of the HBA. + **/ static void lpfc_block_fabric_iocbs(struct lpfc_hba *phba) { @@ -4846,6 +6112,19 @@ lpfc_block_fabric_iocbs(struct lpfc_hba *phba) return; } +/** + * lpfc_cmpl_fabric_iocb: Completion callback function for fabric iocb. + * @phba: pointer to lpfc hba data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @rspiocb: pointer to lpfc response iocb data structure. + * + * This routine is the callback function that is put to the fabric iocb's + * callback function pointer (iocb->iocb_cmpl). The original iocb's callback + * function pointer has been stored in iocb->fabric_iocb_cmpl. This callback + * function first restores and invokes the original iocb's callback function + * and then invokes the lpfc_resume_fabric_iocbs() routine to issue the next + * fabric bound iocb from the driver internal fabric iocb list onto the wire. + **/ static void lpfc_cmpl_fabric_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_iocbq *rspiocb) @@ -4892,6 +6171,30 @@ lpfc_cmpl_fabric_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, } } +/** + * lpfc_issue_fabric_iocb: Issue a fabric iocb command. + * @phba: pointer to lpfc hba data structure. + * @iocb: pointer to lpfc command iocb data structure. + * + * This routine is used as the top-level API for issuing a fabric iocb command + * such as FLOGI and FDISC. To accommodate certain switch fabric, this driver + * function makes sure that only one fabric bound iocb will be outstanding at + * any given time. As such, this function will first check to see whether there + * is already an outstanding fabric iocb on the wire. If so, it will put the + * newly issued iocb onto the driver internal fabric iocb list, waiting to be + * issued later. Otherwise, it will issue the iocb on the wire and update the + * fabric iocb count it indicate that there is one fabric iocb on the wire. + * + * Note, this implementation has a potential sending out fabric IOCBs out of + * order. The problem is caused by the construction of the "ready" boolen does + * not include the condition that the internal fabric IOCB list is empty. As + * such, it is possible a fabric IOCB issued by this routine might be "jump" + * ahead of the fabric IOCBs in the internal list. + * + * Return code + * IOCB_SUCCESS - either fabric iocb put on the list or issued successfully + * IOCB_ERROR - failed to issue fabric iocb + **/ static int lpfc_issue_fabric_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *iocb) { @@ -4937,7 +6240,17 @@ lpfc_issue_fabric_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *iocb) return ret; } - +/** + * lpfc_fabric_abort_vport: Abort a vport's iocbs from driver fabric iocb list. + * @vport: pointer to a virtual N_Port data structure. + * + * This routine aborts all the IOCBs associated with a @vport from the + * driver internal fabric IOCB list. The list contains fabric IOCBs to be + * issued to the ELS IOCB ring. This abort function walks the fabric IOCB + * list, removes each IOCB associated with the @vport off the list, set the + * status feild to IOSTAT_LOCAL_REJECT, and invokes the callback function + * associated with the IOCB. + **/ static void lpfc_fabric_abort_vport(struct lpfc_vport *vport) { LIST_HEAD(completions); @@ -4967,6 +6280,17 @@ static void lpfc_fabric_abort_vport(struct lpfc_vport *vport) } } +/** + * lpfc_fabric_abort_nport: Abort a ndlp's iocbs from driver fabric iocb list. + * @ndlp: pointer to a node-list data structure. + * + * This routine aborts all the IOCBs associated with an @ndlp from the + * driver internal fabric IOCB list. The list contains fabric IOCBs to be + * issued to the ELS IOCB ring. This abort function walks the fabric IOCB + * list, removes each IOCB associated with the @ndlp off the list, set the + * status feild to IOSTAT_LOCAL_REJECT, and invokes the callback function + * associated with the IOCB. + **/ void lpfc_fabric_abort_nport(struct lpfc_nodelist *ndlp) { LIST_HEAD(completions); @@ -4996,6 +6320,17 @@ void lpfc_fabric_abort_nport(struct lpfc_nodelist *ndlp) } } +/** + * lpfc_fabric_abort_hba: Abort all iocbs on driver fabric iocb list. + * @phba: pointer to lpfc hba data structure. + * + * This routine aborts all the IOCBs currently on the driver internal + * fabric IOCB list. The list contains fabric IOCBs to be issued to the ELS + * IOCB ring. This function takes the entire IOCB list off the fabric IOCB + * list, removes IOCBs off the list, set the status feild to + * IOSTAT_LOCAL_REJECT, and invokes the callback function associated with + * the IOCB. + **/ void lpfc_fabric_abort_hba(struct lpfc_hba *phba) { LIST_HEAD(completions); diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index d51a2a4b43e..b9d553c2ac4 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -52,17 +52,20 @@ static struct scsi_transport_template *lpfc_transport_template = NULL; static struct scsi_transport_template *lpfc_vport_transport_template = NULL; static DEFINE_IDR(lpfc_hba_index); -/************************************************************************/ -/* */ -/* lpfc_config_port_prep */ -/* This routine will do LPFC initialization prior to the */ -/* CONFIG_PORT mailbox command. This will be initialized */ -/* as a SLI layer callback routine. */ -/* This routine returns 0 on success or -ERESTART if it wants */ -/* the SLI layer to reset the HBA and try again. Any */ -/* other return value indicates an error. */ -/* */ -/************************************************************************/ +/** + * lpfc_config_port_prep: Perform lpfc initialization prior to config port. + * @phba: pointer to lpfc hba data structure. + * + * This routine will do LPFC initialization prior to issuing the CONFIG_PORT + * mailbox command. It retrieves the revision information from the HBA and + * collects the Vital Product Data (VPD) about the HBA for preparing the + * configuration of the HBA. + * + * Return codes: + * 0 - success. + * -ERESTART - requests the SLI layer to reset the HBA and try again. + * Any other value - indicates an error. + **/ int lpfc_config_port_prep(struct lpfc_hba *phba) { @@ -214,7 +217,16 @@ out_free_mbox: return 0; } -/* Completion handler for config async event mailbox command. */ +/** + * lpfc_config_async_cmpl: Completion handler for config async event mbox cmd. + * @phba: pointer to lpfc hba data structure. + * @pmboxq: pointer to the driver internal queue element for mailbox command. + * + * This is the completion handler for driver's configuring asynchronous event + * mailbox command to the device. If the mailbox command returns successfully, + * it will set internal async event support flag to 1; otherwise, it will + * set internal async event support flag to 0. + **/ static void lpfc_config_async_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq) { @@ -226,16 +238,19 @@ lpfc_config_async_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq) return; } -/************************************************************************/ -/* */ -/* lpfc_config_port_post */ -/* This routine will do LPFC initialization after the */ -/* CONFIG_PORT mailbox command. This will be initialized */ -/* as a SLI layer callback routine. */ -/* This routine returns 0 on success. Any other return value */ -/* indicates an error. */ -/* */ -/************************************************************************/ +/** + * lpfc_config_port_post: Perform lpfc initialization after config port. + * @phba: pointer to lpfc hba data structure. + * + * This routine will do LPFC initialization after the CONFIG_PORT mailbox + * command call. It performs all internal resource and state setups on the + * port: post IOCB buffers, enable appropriate host interrupt attentions, + * ELS ring timers, etc. + * + * Return codes + * 0 - success. + * Any other value - error. + **/ int lpfc_config_port_post(struct lpfc_hba *phba) { @@ -450,16 +465,17 @@ lpfc_config_port_post(struct lpfc_hba *phba) return (0); } -/************************************************************************/ -/* */ -/* lpfc_hba_down_prep */ -/* This routine will do LPFC uninitialization before the */ -/* HBA is reset when bringing down the SLI Layer. This will be */ -/* initialized as a SLI layer callback routine. */ -/* This routine returns 0 on success. Any other return value */ -/* indicates an error. */ -/* */ -/************************************************************************/ +/** + * lpfc_hba_down_prep: Perform lpfc uninitialization prior to HBA reset. + * @phba: pointer to lpfc HBA data structure. + * + * This routine will do LPFC uninitialization before the HBA is reset when + * bringing down the SLI Layer. + * + * Return codes + * 0 - success. + * Any other value - error. + **/ int lpfc_hba_down_prep(struct lpfc_hba *phba) { @@ -481,15 +497,17 @@ lpfc_hba_down_prep(struct lpfc_hba *phba) return 0; } -/************************************************************************/ -/* */ -/* lpfc_hba_down_post */ -/* This routine will do uninitialization after the HBA is reset */ -/* when bringing down the SLI Layer. */ -/* This routine returns 0 on success. Any other return value */ -/* indicates an error. */ -/* */ -/************************************************************************/ +/** + * lpfc_hba_down_post: Perform lpfc uninitialization after HBA reset. + * @phba: pointer to lpfc HBA data structure. + * + * This routine will do uninitialization after the HBA is reset when bring + * down the SLI Layer. + * + * Return codes + * 0 - sucess. + * Any other value - error. + **/ int lpfc_hba_down_post(struct lpfc_hba *phba) { @@ -548,7 +566,18 @@ lpfc_hba_down_post(struct lpfc_hba *phba) return 0; } -/* HBA heart beat timeout handler */ +/** + * lpfc_hb_timeout: The HBA-timer timeout handler. + * @ptr: unsigned long holds the pointer to lpfc hba data structure. + * + * This is the HBA-timer timeout handler registered to the lpfc driver. When + * this timer fires, a HBA timeout event shall be posted to the lpfc driver + * work-port-events bitmap and the worker thread is notified. This timeout + * event will be used by the worker thread to invoke the actual timeout + * handler routine, lpfc_hb_timeout_handler. Any periodical operations will + * be performed in the timeout handler and the HBA timeout event bit shall + * be cleared by the worker thread after it has taken the event bitmap out. + **/ static void lpfc_hb_timeout(unsigned long ptr) { @@ -568,6 +597,22 @@ lpfc_hb_timeout(unsigned long ptr) return; } +/** + * lpfc_hb_mbox_cmpl: The lpfc heart-beat mailbox command callback function. + * @phba: pointer to lpfc hba data structure. + * @pmboxq: pointer to the driver internal queue element for mailbox command. + * + * This is the callback function to the lpfc heart-beat mailbox command. + * If configured, the lpfc driver issues the heart-beat mailbox command to + * the HBA every LPFC_HB_MBOX_INTERVAL (current 5) seconds. At the time the + * heart-beat mailbox command is issued, the driver shall set up heart-beat + * timeout timer to LPFC_HB_MBOX_TIMEOUT (current 30) seconds and marks + * heart-beat outstanding state. Once the mailbox command comes back and + * no error conditions detected, the heart-beat mailbox command timer is + * reset to LPFC_HB_MBOX_INTERVAL seconds and the heart-beat outstanding + * state is cleared for the next heart-beat. If the timer expired with the + * heart-beat outstanding state set, the driver will put the HBA offline. + **/ static void lpfc_hb_mbox_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq) { @@ -586,6 +631,22 @@ lpfc_hb_mbox_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq) return; } +/** + * lpfc_hb_timeout_handler: The HBA-timer timeout handler. + * @phba: pointer to lpfc hba data structure. + * + * This is the actual HBA-timer timeout handler to be invoked by the worker + * thread whenever the HBA timer fired and HBA-timeout event posted. This + * handler performs any periodic operations needed for the device. If such + * periodic event has already been attended to either in the interrupt handler + * or by processing slow-ring or fast-ring events within the HBA-timer + * timeout window (LPFC_HB_MBOX_INTERVAL), this handler just simply resets + * the timer for the next timeout period. If lpfc heart-beat mailbox command + * is configured and there is no heart-beat mailbox command outstanding, a + * heart-beat mailbox is issued and timer set properly. Otherwise, if there + * has been a heart-beat mailbox command outstanding, the HBA shall be put + * to offline. + **/ void lpfc_hb_timeout_handler(struct lpfc_hba *phba) { @@ -684,6 +745,13 @@ lpfc_hb_timeout_handler(struct lpfc_hba *phba) } } +/** + * lpfc_offline_eratt: Bring lpfc offline on hardware error attention. + * @phba: pointer to lpfc hba data structure. + * + * This routine is called to bring the HBA offline when HBA hardware error + * other than Port Error 6 has been detected. + **/ static void lpfc_offline_eratt(struct lpfc_hba *phba) { @@ -704,14 +772,16 @@ lpfc_offline_eratt(struct lpfc_hba *phba) return; } -/************************************************************************/ -/* */ -/* lpfc_handle_eratt */ -/* This routine will handle processing a Host Attention */ -/* Error Status event. This will be initialized */ -/* as a SLI layer callback routine. */ -/* */ -/************************************************************************/ +/** + * lpfc_handle_eratt: The HBA hardware error handler. + * @phba: pointer to lpfc hba data structure. + * + * This routine is invoked to handle the following HBA hardware error + * conditions: + * 1 - HBA error attention interrupt + * 2 - DMA ring index out of range + * 3 - Mailbox command came back as unknown + **/ void lpfc_handle_eratt(struct lpfc_hba *phba) { @@ -810,14 +880,13 @@ lpfc_handle_eratt(struct lpfc_hba *phba) } } -/************************************************************************/ -/* */ -/* lpfc_handle_latt */ -/* This routine will handle processing a Host Attention */ -/* Link Status event. This will be initialized */ -/* as a SLI layer callback routine. */ -/* */ -/************************************************************************/ +/** + * lpfc_handle_latt: The HBA link event handler. + * @phba: pointer to lpfc hba data structure. + * + * This routine is invoked from the worker thread to handle a HBA host + * attention link event. + **/ void lpfc_handle_latt(struct lpfc_hba *phba) { @@ -898,12 +967,20 @@ lpfc_handle_latt_err_exit: return; } -/************************************************************************/ -/* */ -/* lpfc_parse_vpd */ -/* This routine will parse the VPD data */ -/* */ -/************************************************************************/ +/** + * lpfc_parse_vpd: Parse VPD (Vital Product Data). + * @phba: pointer to lpfc hba data structure. + * @vpd: pointer to the vital product data. + * @len: length of the vital product data in bytes. + * + * This routine parses the Vital Product Data (VPD). The VPD is treated as + * an array of characters. In this routine, the ModelName, ProgramType, and + * ModelDesc, etc. fields of the phba data structure will be populated. + * + * Return codes + * 0 - pointer to the VPD passed in is NULL + * 1 - success + **/ static int lpfc_parse_vpd(struct lpfc_hba *phba, uint8_t *vpd, int len) { @@ -1040,6 +1117,18 @@ lpfc_parse_vpd(struct lpfc_hba *phba, uint8_t *vpd, int len) return(1); } +/** + * lpfc_get_hba_model_desc: Retrieve HBA device model name and description. + * @phba: pointer to lpfc hba data structure. + * @mdp: pointer to the data structure to hold the derived model name. + * @descp: pointer to the data structure to hold the derived description. + * + * This routine retrieves HBA's description based on its registered PCI device + * ID. The @descp passed into this function points to an array of 256 chars. It + * shall be returned with the model name, maximum speed, and the host bus type. + * The @mdp passed into this function points to an array of 80 chars. When the + * function returns, the @mdp will be filled with the model name. + **/ static void lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp) { @@ -1190,14 +1279,18 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp) m.name, m.max_speed, m.bus); } -/**************************************************/ -/* lpfc_post_buffer */ -/* */ -/* This routine will post count buffers to the */ -/* ring with the QUE_RING_BUF_CN command. This */ -/* allows 3 buffers / command to be posted. */ -/* Returns the number of buffers NOT posted. */ -/**************************************************/ +/** + * lpfc_post_buffer: Post IOCB(s) with DMA buffer descriptor(s) to a IOCB ring. + * @phba: pointer to lpfc hba data structure. + * @pring: pointer to a IOCB ring. + * @cnt: the number of IOCBs to be posted to the IOCB ring. + * + * This routine posts a given number of IOCBs with the associated DMA buffer + * descriptors specified by the cnt argument to the given IOCB ring. + * + * Return codes + * The number of IOCBs NOT able to be posted to the IOCB ring. + **/ int lpfc_post_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, int cnt) { @@ -1287,12 +1380,17 @@ lpfc_post_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, int cnt) return 0; } -/************************************************************************/ -/* */ -/* lpfc_post_rcv_buf */ -/* This routine post initial rcv buffers to the configured rings */ -/* */ -/************************************************************************/ +/** + * lpfc_post_rcv_buf: Post the initial receive IOCB buffers to ELS ring. + * @phba: pointer to lpfc hba data structure. + * + * This routine posts initial receive IOCB buffers to the ELS ring. The + * current number of initial IOCB buffers specified by LPFC_BUF_RING0 is + * set to 64 IOCBs. + * + * Return codes + * 0 - success (currently always success) + **/ static int lpfc_post_rcv_buf(struct lpfc_hba *phba) { @@ -1307,11 +1405,13 @@ lpfc_post_rcv_buf(struct lpfc_hba *phba) #define S(N,V) (((V)<<(N))|((V)>>(32-(N)))) -/************************************************************************/ -/* */ -/* lpfc_sha_init */ -/* */ -/************************************************************************/ +/** + * lpfc_sha_init: Set up initial array of hash table entries. + * @HashResultPointer: pointer to an array as hash table. + * + * This routine sets up the initial values to the array of hash table entries + * for the LC HBAs. + **/ static void lpfc_sha_init(uint32_t * HashResultPointer) { @@ -1322,11 +1422,16 @@ lpfc_sha_init(uint32_t * HashResultPointer) HashResultPointer[4] = 0xC3D2E1F0; } -/************************************************************************/ -/* */ -/* lpfc_sha_iterate */ -/* */ -/************************************************************************/ +/** + * lpfc_sha_iterate: Iterate initial hash table with the working hash table. + * @HashResultPointer: pointer to an initial/result hash table. + * @HashWorkingPointer: pointer to an working hash table. + * + * This routine iterates an initial hash table pointed by @HashResultPointer + * with the values from the working hash table pointeed by @HashWorkingPointer. + * The results are putting back to the initial hash table, returned through + * the @HashResultPointer as the result hash table. + **/ static void lpfc_sha_iterate(uint32_t * HashResultPointer, uint32_t * HashWorkingPointer) { @@ -1374,22 +1479,29 @@ lpfc_sha_iterate(uint32_t * HashResultPointer, uint32_t * HashWorkingPointer) } -/************************************************************************/ -/* */ -/* lpfc_challenge_key */ -/* */ -/************************************************************************/ +/** + * lpfc_challenge_key: Create challenge key based on WWPN of the HBA. + * @RandomChallenge: pointer to the entry of host challenge random number array. + * @HashWorking: pointer to the entry of the working hash array. + * + * This routine calculates the working hash array referred by @HashWorking + * from the challenge random numbers associated with the host, referred by + * @RandomChallenge. The result is put into the entry of the working hash + * array and returned by reference through @HashWorking. + **/ static void lpfc_challenge_key(uint32_t * RandomChallenge, uint32_t * HashWorking) { *HashWorking = (*RandomChallenge ^ *HashWorking); } -/************************************************************************/ -/* */ -/* lpfc_hba_init */ -/* */ -/************************************************************************/ +/** + * lpfc_hba_init: Perform special handling for LC HBA initialization. + * @phba: pointer to lpfc hba data structure. + * @hbainit: pointer to an array of unsigned 32-bit integers. + * + * This routine performs the special handling for LC HBA initialization. + **/ void lpfc_hba_init(struct lpfc_hba *phba, uint32_t *hbainit) { @@ -1412,6 +1524,15 @@ lpfc_hba_init(struct lpfc_hba *phba, uint32_t *hbainit) kfree(HashWorking); } +/** + * lpfc_cleanup: Performs vport cleanups before deleting a vport. + * @vport: pointer to a virtual N_Port data structure. + * + * This routine performs the necessary cleanups before deleting the @vport. + * It invokes the discovery state machine to perform necessary state + * transitions and to release the ndlps associated with the @vport. Note, + * the physical port is treated as @vport 0. + **/ void lpfc_cleanup(struct lpfc_vport *vport) { @@ -1498,6 +1619,14 @@ lpfc_cleanup(struct lpfc_vport *vport) return; } +/** + * lpfc_stop_vport_timers: Stop all the timers associated with a vport. + * @vport: pointer to a virtual N_Port data structure. + * + * This routine stops all the timers associated with a @vport. This function + * is invoked before disabling or deleting a @vport. Note that the physical + * port is treated as @vport 0. + **/ void lpfc_stop_vport_timers(struct lpfc_vport *vport) { @@ -1507,6 +1636,13 @@ lpfc_stop_vport_timers(struct lpfc_vport *vport) return; } +/** + * lpfc_stop_phba_timers: Stop all the timers associated with an HBA. + * @phba: pointer to lpfc hba data structure. + * + * This routine stops all the timers associated with a HBA. This function is + * invoked before either putting a HBA offline or unloading the driver. + **/ static void lpfc_stop_phba_timers(struct lpfc_hba *phba) { @@ -1519,6 +1655,16 @@ lpfc_stop_phba_timers(struct lpfc_hba *phba) return; } +/** + * lpfc_block_mgmt_io: Mark a HBA's management interface as blocked. + * @phba: pointer to lpfc hba data structure. + * + * This routine marks a HBA's management interface as blocked. Once the HBA's + * management interface is marked as blocked, all the user space access to + * the HBA, whether they are from sysfs interface or libdfc interface will + * all be blocked. The HBA is set to block the management interface when the + * driver prepares the HBA interface for online or offline. + **/ static void lpfc_block_mgmt_io(struct lpfc_hba * phba) { @@ -1529,6 +1675,18 @@ lpfc_block_mgmt_io(struct lpfc_hba * phba) spin_unlock_irqrestore(&phba->hbalock, iflag); } +/** + * lpfc_online: Initialize and bring a HBA online. + * @phba: pointer to lpfc hba data structure. + * + * This routine initializes the HBA and brings a HBA online. During this + * process, the management interface is blocked to prevent user space access + * to the HBA interfering with the driver initialization. + * + * Return codes + * 0 - successful + * 1 - failed + **/ int lpfc_online(struct lpfc_hba *phba) { @@ -1574,6 +1732,17 @@ lpfc_online(struct lpfc_hba *phba) return 0; } +/** + * lpfc_unblock_mgmt_io: Mark a HBA's management interface to be not blocked. + * @phba: pointer to lpfc hba data structure. + * + * This routine marks a HBA's management interface as not blocked. Once the + * HBA's management interface is marked as not blocked, all the user space + * access to the HBA, whether they are from sysfs interface or libdfc + * interface will be allowed. The HBA is set to block the management interface + * when the driver prepares the HBA interface for online or offline and then + * set to unblock the management interface afterwards. + **/ void lpfc_unblock_mgmt_io(struct lpfc_hba * phba) { @@ -1584,6 +1753,14 @@ lpfc_unblock_mgmt_io(struct lpfc_hba * phba) spin_unlock_irqrestore(&phba->hbalock, iflag); } +/** + * lpfc_offline_prep: Prepare a HBA to be brought offline. + * @phba: pointer to lpfc hba data structure. + * + * This routine is invoked to prepare a HBA to be brought offline. It performs + * unregistration login to all the nodes on all vports and flushes the mailbox + * queue to make it ready to be brought offline. + **/ void lpfc_offline_prep(struct lpfc_hba * phba) { @@ -1633,6 +1810,14 @@ lpfc_offline_prep(struct lpfc_hba * phba) lpfc_sli_flush_mbox_queue(phba); } +/** + * lpfc_offline: Bring a HBA offline. + * @phba: pointer to lpfc hba data structure. + * + * This routine actually brings a HBA offline. It stops all the timers + * associated with the HBA, brings down the SLI layer, and eventually + * marks the HBA as in offline state for the upper layer protocol. + **/ void lpfc_offline(struct lpfc_hba *phba) { @@ -1670,12 +1855,17 @@ lpfc_offline(struct lpfc_hba *phba) lpfc_destroy_vport_work_array(phba, vports); } -/****************************************************************************** -* Function name: lpfc_scsi_free -* -* Description: Called from lpfc_pci_remove_one free internal driver resources -* -******************************************************************************/ +/** + * lpfc_scsi_free: Free all the SCSI buffers and IOCBs from driver lists. + * @phba: pointer to lpfc hba data structure. + * + * This routine is to free all the SCSI buffers and IOCBs from the driver + * list back to kernel. It is called from lpfc_pci_remove_one to free + * the internal resources before the device is removed from the system. + * + * Return codes + * 0 - successful (for now, it always returns 0) + **/ static int lpfc_scsi_free(struct lpfc_hba *phba) { @@ -1704,6 +1894,22 @@ lpfc_scsi_free(struct lpfc_hba *phba) return 0; } +/** + * lpfc_create_port: Create an FC port. + * @phba: pointer to lpfc hba data structure. + * @instance: a unique integer ID to this FC port. + * @dev: pointer to the device data structure. + * + * This routine creates a FC port for the upper layer protocol. The FC port + * can be created on top of either a physical port or a virtual port provided + * by the HBA. This routine also allocates a SCSI host data structure (shost) + * and associates the FC port created before adding the shost into the SCSI + * layer. + * + * Return codes + * @vport - pointer to the virtual N_Port data structure. + * NULL - port create failed. + **/ struct lpfc_vport * lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev) { @@ -1777,6 +1983,13 @@ out: return NULL; } +/** + * destroy_port: Destroy an FC port. + * @vport: pointer to an lpfc virtual N_Port data structure. + * + * This routine destroys a FC port from the upper layer protocol. All the + * resources associated with the port are released. + **/ void destroy_port(struct lpfc_vport *vport) { @@ -1797,6 +2010,16 @@ destroy_port(struct lpfc_vport *vport) return; } +/** + * lpfc_get_instance: Get a unique integer ID. + * + * This routine allocates a unique integer ID from lpfc_hba_index pool. It + * uses the kernel idr facility to perform the task. + * + * Return codes: + * instance - a unique integer ID allocated as the new instance. + * -1 - lpfc get instance failed. + **/ int lpfc_get_instance(void) { @@ -1810,11 +2033,21 @@ lpfc_get_instance(void) return instance; } -/* - * Note: there is no scan_start function as adapter initialization - * will have asynchronously kicked off the link initialization. - */ - +/** + * lpfc_scan_finished: method for SCSI layer to detect whether scan is done. + * @shost: pointer to SCSI host data structure. + * @time: elapsed time of the scan in jiffies. + * + * This routine is called by the SCSI layer with a SCSI host to determine + * whether the scan host is finished. + * + * Note: there is no scan_start function as adapter initialization will have + * asynchronously kicked off the link initialization. + * + * Return codes + * 0 - SCSI host scan is not over yet. + * 1 - SCSI host scan is over. + **/ int lpfc_scan_finished(struct Scsi_Host *shost, unsigned long time) { struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; @@ -1858,6 +2091,13 @@ finished: return stat; } +/** + * lpfc_host_attrib_init: Initialize SCSI host attributes on a FC port. + * @shost: pointer to SCSI host data structure. + * + * This routine initializes a given SCSI host attributes on a FC port. The + * SCSI host can be either on top of a physical port or a virtual port. + **/ void lpfc_host_attrib_init(struct Scsi_Host *shost) { struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; @@ -1906,6 +2146,25 @@ void lpfc_host_attrib_init(struct Scsi_Host *shost) spin_unlock_irq(shost->host_lock); } +/** + * lpfc_enable_msix: Enable MSI-X interrupt mode. + * @phba: pointer to lpfc hba data structure. + * + * This routine is invoked to enable the MSI-X interrupt vectors. The kernel + * function pci_enable_msix() is called to enable the MSI-X vectors. Note that + * pci_enable_msix(), once invoked, enables either all or nothing, depending + * on the current availability of PCI vector resources. The device driver is + * responsible for calling the individual request_irq() to register each MSI-X + * vector with a interrupt handler, which is done in this function. Note that + * later when device is unloading, the driver should always call free_irq() + * on all MSI-X vectors it has done request_irq() on before calling + * pci_disable_msix(). Failure to do so results in a BUG_ON() and a device + * will be left with MSI-X enabled and leaks its vectors. + * + * Return codes + * 0 - sucessful + * other values - error + **/ static int lpfc_enable_msix(struct lpfc_hba *phba) { @@ -1935,6 +2194,13 @@ lpfc_enable_msix(struct lpfc_hba *phba) return error; } +/** + * lpfc_disable_msix: Disable MSI-X interrupt mode. + * @phba: pointer to lpfc hba data structure. + * + * This routine is invoked to release the MSI-X vectors and then disable the + * MSI-X interrupt mode. + **/ static void lpfc_disable_msix(struct lpfc_hba *phba) { @@ -1942,6 +2208,23 @@ lpfc_disable_msix(struct lpfc_hba *phba) pci_disable_msix(phba->pcidev); } +/** + * lpfc_pci_probe_one: lpfc PCI probe func to register device to PCI subsystem. + * @pdev: pointer to PCI device + * @pid: pointer to PCI device identifier + * + * This routine is to be registered to the kernel's PCI subsystem. When an + * Emulex HBA is presented in PCI bus, the kernel PCI subsystem looks at + * PCI device-specific information of the device and driver to see if the + * driver state that it can support this kind of device. If the match is + * successful, the driver core invokes this routine. If this routine + * determines it can claim the HBA, it does all the initialization that it + * needs to do to handle the HBA properly. + * + * Return code + * 0 - driver can claim the device + * negative value - driver can not claim the device + **/ static int __devinit lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) { @@ -2262,6 +2545,14 @@ out: return error; } +/** + * lpfc_pci_remove_one: lpfc PCI func to unregister device from PCI subsystem. + * @pdev: pointer to PCI device + * + * This routine is to be registered to the kernel's PCI subsystem. When an + * Emulex HBA is removed from PCI bus. It perform all the necessary cleanup + * for the HBA device to be removed from the PCI subsystem properly. + **/ static void __devexit lpfc_pci_remove_one(struct pci_dev *pdev) { @@ -2336,13 +2627,21 @@ lpfc_pci_remove_one(struct pci_dev *pdev) } /** - * lpfc_io_error_detected - called when PCI error is detected - * @pdev: Pointer to PCI device - * @state: The current pci conneection state + * lpfc_io_error_detected: Driver method for handling PCI I/O error detected. + * @pdev: pointer to PCI device. + * @state: the current PCI connection state. * - * This function is called after a PCI bus error affecting - * this device has been detected. - */ + * This routine is registered to the PCI subsystem for error handling. This + * function is called by the PCI subsystem after a PCI bus error affecting + * this device has been detected. When this function is invoked, it will + * need to stop all the I/Os and interrupt(s) to the device. Once that is + * done, it will return PCI_ERS_RESULT_NEED_RESET for the PCI subsystem to + * perform proper recovery as desired. + * + * Return codes + * PCI_ERS_RESULT_NEED_RESET - need to reset before recovery + * PCI_ERS_RESULT_DISCONNECT - device could not be recovered + **/ static pci_ers_result_t lpfc_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state) { @@ -2376,10 +2675,21 @@ static pci_ers_result_t lpfc_io_error_detected(struct pci_dev *pdev, } /** - * lpfc_io_slot_reset - called after the pci bus has been reset. - * @pdev: Pointer to PCI device + * lpfc_io_slot_reset: Restart a PCI device from scratch. + * @pdev: pointer to PCI device. + * + * This routine is registered to the PCI subsystem for error handling. This is + * called after PCI bus has been reset to restart the PCI card from scratch, + * as if from a cold-boot. During the PCI subsystem error recovery, after the + * driver returns PCI_ERS_RESULT_NEED_RESET, the PCI subsystem will perform + * proper error recovery and then call this routine before calling the .resume + * method to recover the device. This function will initialize the HBA device, + * enable the interrupt, but it will just put the HBA to offline state without + * passing any I/O traffic. * - * Restart the card from scratch, as if from a cold-boot. + * Return codes + * PCI_ERS_RESULT_RECOVERED - the device has been recovered + * PCI_ERS_RESULT_DISCONNECT - device could not be recovered */ static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev) { @@ -2440,11 +2750,13 @@ static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev) } /** - * lpfc_io_resume - called when traffic can start flowing again. - * @pdev: Pointer to PCI device + * lpfc_io_resume: Resume PCI I/O operation. + * @pdev: pointer to PCI device * - * This callback is called when the error recovery driver tells us that - * its OK to resume normal operation. + * This routine is registered to the PCI subsystem for error handling. It is + * called when kernel error recovery tells the lpfc driver that it is ok to + * resume normal PCI operation after PCI bus error recovery. After this call, + * traffic can start to flow from this device again. */ static void lpfc_io_resume(struct pci_dev *pdev) { @@ -2540,6 +2852,18 @@ static struct pci_driver lpfc_driver = { .err_handler = &lpfc_err_handler, }; +/** + * lpfc_init: lpfc module initialization routine. + * + * This routine is to be invoked when the lpfc module is loaded into the + * kernel. The special kernel macro module_init() is used to indicate the + * role of this routine to the kernel as lpfc module entry point. + * + * Return codes + * 0 - successful + * -ENOMEM - FC attach transport failed + * all others - failed + */ static int __init lpfc_init(void) { @@ -2573,6 +2897,13 @@ lpfc_init(void) return error; } +/** + * lpfc_exit: lpfc module removal routine. + * + * This routine is invoked when the lpfc module is removed from the kernel. + * The special kernel macro module_exit() is used to indicate the role of + * this routine to the kernel as lpfc module exit point. + */ static void __exit lpfc_exit(void) { diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c index 7a9be4c5b7c..7413bfdf89a 100644 --- a/drivers/scsi/lpfc/lpfc_mbox.c +++ b/drivers/scsi/lpfc/lpfc_mbox.c @@ -37,10 +37,20 @@ #include "lpfc_crtn.h" #include "lpfc_compat.h" -/**********************************************/ - -/* mailbox command */ -/**********************************************/ +/** + * lpfc_dump_mem: Prepare a mailbox command for retrieving HBA's VPD memory. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * @offset: offset for dumping VPD memory mailbox command. + * + * The dump mailbox command provides a method for the device driver to obtain + * various types of information from the HBA device. + * + * This routine prepares the mailbox command for dumping HBA Vital Product + * Data (VPD) memory. This mailbox command is to be used for retrieving a + * portion (DMP_RSP_SIZE bytes) of a HBA's VPD from the HBA at an address + * offset specified by the offset parameter. + **/ void lpfc_dump_mem(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, uint16_t offset) { @@ -65,10 +75,17 @@ lpfc_dump_mem(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, uint16_t offset) return; } -/**********************************************/ -/* lpfc_read_nv Issue a READ NVPARAM */ -/* mailbox command */ -/**********************************************/ +/** + * lpfc_read_nv: Prepare a mailbox command for reading HBA's NVRAM param. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * The read NVRAM mailbox command returns the HBA's non-volatile parameters + * that are used as defaults when the Fibre Channel link is brought on-line. + * + * This routine prepares the mailbox command for reading information stored + * in the HBA's NVRAM. Specifically, the HBA's WWNN and WWPN. + **/ void lpfc_read_nv(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) { @@ -81,10 +98,19 @@ lpfc_read_nv(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) return; } -/**********************************************/ -/* lpfc_config_async Issue a */ -/* MBX_ASYNC_EVT_ENABLE mailbox command */ -/**********************************************/ +/** + * lpfc_config_async: Prepare a mailbox command for enabling HBA async event. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * @ring: ring number for the asynchronous event to be configured. + * + * The asynchronous event enable mailbox command is used to enable the + * asynchronous event posting via the ASYNC_STATUS_CN IOCB response and + * specifies the default ring to which events are posted. + * + * This routine prepares the mailbox command for enabling HBA asynchronous + * event support on a IOCB ring. + **/ void lpfc_config_async(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, uint32_t ring) @@ -99,10 +125,19 @@ lpfc_config_async(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, return; } -/**********************************************/ -/* lpfc_heart_beat Issue a HEART_BEAT */ -/* mailbox command */ -/**********************************************/ +/** + * lpfc_heart_beat: Prepare a mailbox command for heart beat. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * The heart beat mailbox command is used to detect an unresponsive HBA, which + * is defined as any device where no error attention is sent and both mailbox + * and rings are not processed. + * + * This routine prepares the mailbox command for issuing a heart beat in the + * form of mailbox command to the HBA. The timely completion of the heart + * beat mailbox command indicates the health of the HBA. + **/ void lpfc_heart_beat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) { @@ -115,10 +150,26 @@ lpfc_heart_beat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) return; } -/**********************************************/ -/* lpfc_read_la Issue a READ LA */ -/* mailbox command */ -/**********************************************/ +/** + * lpfc_read_la: Prepare a mailbox command for reading HBA link attention. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * @mp: DMA buffer memory for reading the link attention information into. + * + * The read link attention mailbox command is issued to read the Link Event + * Attention information indicated by the HBA port when the Link Event bit + * of the Host Attention (HSTATT) register is set to 1. A Link Event + * Attention occurs based on an exception detected at the Fibre Channel link + * interface. + * + * This routine prepares the mailbox command for reading HBA link attention + * information. A DMA memory has been set aside and address passed to the + * HBA through @mp for the HBA to DMA link attention information into the + * memory as part of the execution of the mailbox command. + * + * Return codes + * 0 - Success (currently always return 0) + **/ int lpfc_read_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, struct lpfc_dmabuf *mp) { @@ -143,10 +194,21 @@ lpfc_read_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, struct lpfc_dmabuf *mp) return (0); } -/**********************************************/ -/* lpfc_clear_la Issue a CLEAR LA */ -/* mailbox command */ -/**********************************************/ +/** + * lpfc_clear_la: Prepare a mailbox command for clearing HBA link attention. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * The clear link attention mailbox command is issued to clear the link event + * attention condition indicated by the Link Event bit of the Host Attention + * (HSTATT) register. The link event attention condition is cleared only if + * the event tag specified matches that of the current link event counter. + * The current event tag is read using the read link attention event mailbox + * command. + * + * This routine prepares the mailbox command for clearing HBA link attention + * information. + **/ void lpfc_clear_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) { @@ -161,10 +223,20 @@ lpfc_clear_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) return; } -/**************************************************/ -/* lpfc_config_link Issue a CONFIG LINK */ -/* mailbox command */ -/**************************************************/ +/** + * lpfc_config_link: Prepare a mailbox command for configuring link on a HBA. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * The configure link mailbox command is used before the initialize link + * mailbox command to override default value and to configure link-oriented + * parameters such as DID address and various timers. Typically, this + * command would be used after an F_Port login to set the returned DID address + * and the fabric timeout values. This command is not valid before a configure + * port command has configured the HBA port. + * + * This routine prepares the mailbox command for configuring link on a HBA. + **/ void lpfc_config_link(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) { @@ -199,10 +271,20 @@ lpfc_config_link(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) return; } -/**********************************************/ -/* lpfc_init_link Issue an INIT LINK */ -/* mailbox command */ -/**********************************************/ +/** + * lpfc_init_link: Prepare a mailbox command for initialize link on a HBA. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * @topology: the link topology for the link to be initialized to. + * @linkspeed: the link speed for the link to be initialized to. + * + * The initialize link mailbox command is used to initialize the Fibre + * Channel link. This command must follow a configure port command that + * establishes the mode of operation. + * + * This routine prepares the mailbox command for initializing link on a HBA + * with the specified link topology and speed. + **/ void lpfc_init_link(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, uint32_t topology, uint32_t linkspeed) @@ -269,10 +351,27 @@ lpfc_init_link(struct lpfc_hba * phba, return; } -/**********************************************/ -/* lpfc_read_sparam Issue a READ SPARAM */ -/* mailbox command */ -/**********************************************/ +/** + * lpfc_read_sparam: Prepare a mailbox command for reading HBA parameters. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * @vpi: virtual N_Port identifier. + * + * The read service parameter mailbox command is used to read the HBA port + * service parameters. The service parameters are read into the buffer + * specified directly by a BDE in the mailbox command. These service + * parameters may then be used to build the payload of an N_Port/F_POrt + * login request and reply (LOGI/ACC). + * + * This routine prepares the mailbox command for reading HBA port service + * parameters. The DMA memory is allocated in this function and the addresses + * are populated into the mailbox command for the HBA to DMA the service + * parameters into. + * + * Return codes + * 0 - Success + * 1 - DMA memory allocation failed + **/ int lpfc_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb, int vpi) { @@ -312,10 +411,21 @@ lpfc_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb, int vpi) return (0); } -/********************************************/ -/* lpfc_unreg_did Issue a UNREG_DID */ -/* mailbox command */ -/********************************************/ +/** + * lpfc_unreg_did: Prepare a mailbox command for unregistering DID. + * @phba: pointer to lpfc hba data structure. + * @vpi: virtual N_Port identifier. + * @did: remote port identifier. + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * The unregister DID mailbox command is used to unregister an N_Port/F_Port + * login for an unknown RPI by specifying the DID of a remote port. This + * command frees an RPI context in the HBA port. This has the effect of + * performing an implicit N_Port/F_Port logout. + * + * This routine prepares the mailbox command for unregistering a remote + * N_Port/F_Port (DID) login. + **/ void lpfc_unreg_did(struct lpfc_hba * phba, uint16_t vpi, uint32_t did, LPFC_MBOXQ_t * pmb) @@ -333,10 +443,19 @@ lpfc_unreg_did(struct lpfc_hba * phba, uint16_t vpi, uint32_t did, return; } -/**********************************************/ -/* lpfc_read_nv Issue a READ CONFIG */ -/* mailbox command */ -/**********************************************/ +/** + * lpfc_read_config: Prepare a mailbox command for reading HBA configuration. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * The read configuration mailbox command is used to read the HBA port + * configuration parameters. This mailbox command provides a method for + * seeing any parameters that may have changed via various configuration + * mailbox commands. + * + * This routine prepares the mailbox command for reading out HBA configuration + * parameters. + **/ void lpfc_read_config(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) { @@ -350,10 +469,18 @@ lpfc_read_config(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) return; } -/*************************************************/ -/* lpfc_read_lnk_stat Issue a READ LINK STATUS */ -/* mailbox command */ -/*************************************************/ +/** + * lpfc_read_lnk_stat: Prepare a mailbox command for reading HBA link stats. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * The read link status mailbox command is used to read the link status from + * the HBA. Link status includes all link-related error counters. These + * counters are maintained by the HBA and originated in the link hardware + * unit. Note that all of these counters wrap. + * + * This routine prepares the mailbox command for reading out HBA link status. + **/ void lpfc_read_lnk_stat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) { @@ -367,10 +494,30 @@ lpfc_read_lnk_stat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) return; } -/********************************************/ -/* lpfc_reg_login Issue a REG_LOGIN */ -/* mailbox command */ -/********************************************/ +/** + * lpfc_reg_login: Prepare a mailbox command for registering remote login. + * @phba: pointer to lpfc hba data structure. + * @vpi: virtual N_Port identifier. + * @did: remote port identifier. + * @param: pointer to memory holding the server parameters. + * @pmb: pointer to the driver internal queue element for mailbox command. + * @flag: action flag to be passed back for the complete function. + * + * The registration login mailbox command is used to register an N_Port or + * F_Port login. This registration allows the HBA to cache the remote N_Port + * service parameters internally and thereby make the appropriate FC-2 + * decisions. The remote port service parameters are handed off by the driver + * to the HBA using a descriptor entry that directly identifies a buffer in + * host memory. In exchange, the HBA returns an RPI identifier. + * + * This routine prepares the mailbox command for registering remote port login. + * The function allocates DMA buffer for passing the service parameters to the + * HBA with the mailbox command. + * + * Return codes + * 0 - Success + * 1 - DMA memory allocation failed + **/ int lpfc_reg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t did, uint8_t *param, LPFC_MBOXQ_t *pmb, uint32_t flag) @@ -418,10 +565,20 @@ lpfc_reg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t did, return (0); } -/**********************************************/ -/* lpfc_unreg_login Issue a UNREG_LOGIN */ -/* mailbox command */ -/**********************************************/ +/** + * lpfc_unreg_login: Prepare a mailbox command for unregistering remote login. + * @phba: pointer to lpfc hba data structure. + * @vpi: virtual N_Port identifier. + * @rpi: remote port identifier + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * The unregistration login mailbox command is used to unregister an N_Port + * or F_Port login. This command frees an RPI context in the HBA. It has the + * effect of performing an implicit N_Port/F_Port logout. + * + * This routine prepares the mailbox command for unregistering remote port + * login. + **/ void lpfc_unreg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t rpi, LPFC_MBOXQ_t * pmb) @@ -440,10 +597,21 @@ lpfc_unreg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t rpi, return; } -/**************************************************/ -/* lpfc_reg_vpi Issue a REG_VPI */ -/* mailbox command */ -/**************************************************/ +/** + * lpfc_reg_vpi: Prepare a mailbox command for registering vport identifier. + * @phba: pointer to lpfc hba data structure. + * @vpi: virtual N_Port identifier. + * @sid: Fibre Channel S_ID (N_Port_ID assigned to a virtual N_Port). + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * The registration vport identifier mailbox command is used to activate a + * virtual N_Port after it has acquired an N_Port_ID. The HBA validates the + * N_Port_ID against the information in the selected virtual N_Port context + * block and marks it active to allow normal processing of IOCB commands and + * received unsolicited exchanges. + * + * This routine prepares the mailbox command for registering a virtual N_Port. + **/ void lpfc_reg_vpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t sid, LPFC_MBOXQ_t *pmb) @@ -461,10 +629,22 @@ lpfc_reg_vpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t sid, } -/**************************************************/ -/* lpfc_unreg_vpi Issue a UNREG_VNPI */ -/* mailbox command */ -/**************************************************/ +/** + * lpfc_unreg_vpi: Prepare a mailbox command for unregistering vport id. + * @phba: pointer to lpfc hba data structure. + * @vpi: virtual N_Port identifier. + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * The unregistration vport identifier mailbox command is used to inactivate + * a virtual N_Port. The driver must have logged out and unregistered all + * remote N_Ports to abort any activity on the virtual N_Port. The HBA will + * unregisters any default RPIs associated with the specified vpi, aborting + * any active exchanges. The HBA will post the mailbox response after making + * the virtual N_Port inactive. + * + * This routine prepares the mailbox command for unregistering a virtual + * N_Port. + **/ void lpfc_unreg_vpi(struct lpfc_hba *phba, uint16_t vpi, LPFC_MBOXQ_t *pmb) { @@ -479,6 +659,13 @@ lpfc_unreg_vpi(struct lpfc_hba *phba, uint16_t vpi, LPFC_MBOXQ_t *pmb) } +/** + * lpfc_config_pcb_setup: Set up IOCB rings in the Port Control Block (PCB) + * @phba: pointer to lpfc hba data structure. + * + * This routine sets up and initializes the IOCB rings in the Port Control + * Block (PCB). + **/ static void lpfc_config_pcb_setup(struct lpfc_hba * phba) { @@ -536,6 +723,20 @@ lpfc_config_pcb_setup(struct lpfc_hba * phba) } } +/** + * lpfc_read_rev: Prepare a mailbox command for reading HBA revision. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * The read revision mailbox command is used to read the revision levels of + * the HBA components. These components include hardware units, resident + * firmware, and available firmware. HBAs that supports SLI-3 mode of + * operation provide different response information depending on the version + * requested by the driver. + * + * This routine prepares the mailbox command for reading HBA revision + * information. + **/ void lpfc_read_rev(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) { @@ -548,6 +749,16 @@ lpfc_read_rev(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) return; } +/** + * lpfc_build_hbq_profile2: Set up the HBQ Selection Profile 2. + * @hbqmb: pointer to the HBQ configuration data structure in mailbox command. + * @hbq_desc: pointer to the HBQ selection profile descriptor. + * + * The Host Buffer Queue (HBQ) Selection Profile 2 specifies that the HBA + * tests the incoming frames' R_CTL/TYPE fields with works 10:15 and performs + * the Sequence Length Test using the fields in the Selection Profile 2 + * extension in words 20:31. + **/ static void lpfc_build_hbq_profile2(struct config_hbq_var *hbqmb, struct lpfc_hbq_init *hbq_desc) @@ -557,6 +768,16 @@ lpfc_build_hbq_profile2(struct config_hbq_var *hbqmb, hbqmb->profiles.profile2.seqlenoff = hbq_desc->seqlenoff; } +/** + * lpfc_build_hbq_profile3: Set up the HBQ Selection Profile 3. + * @hbqmb: pointer to the HBQ configuration data structure in mailbox command. + * @hbq_desc: pointer to the HBQ selection profile descriptor. + * + * The Host Buffer Queue (HBQ) Selection Profile 3 specifies that the HBA + * tests the incoming frame's R_CTL/TYPE fields with words 10:15 and performs + * the Sequence Length Test and Byte Field Test using the fields in the + * Selection Profile 3 extension in words 20:31. + **/ static void lpfc_build_hbq_profile3(struct config_hbq_var *hbqmb, struct lpfc_hbq_init *hbq_desc) @@ -569,6 +790,17 @@ lpfc_build_hbq_profile3(struct config_hbq_var *hbqmb, sizeof(hbqmb->profiles.profile3.cmdmatch)); } +/** + * lpfc_build_hbq_profile5: Set up the HBQ Selection Profile 5. + * @hbqmb: pointer to the HBQ configuration data structure in mailbox command. + * @hbq_desc: pointer to the HBQ selection profile descriptor. + * + * The Host Buffer Queue (HBQ) Selection Profile 5 specifies a header HBQ. The + * HBA tests the initial frame of an incoming sequence using the frame's + * R_CTL/TYPE fields with words 10:15 and performs the Sequence Length Test + * and Byte Field Test using the fields in the Selection Profile 5 extension + * words 20:31. + **/ static void lpfc_build_hbq_profile5(struct config_hbq_var *hbqmb, struct lpfc_hbq_init *hbq_desc) @@ -581,6 +813,20 @@ lpfc_build_hbq_profile5(struct config_hbq_var *hbqmb, sizeof(hbqmb->profiles.profile5.cmdmatch)); } +/** + * lpfc_config_hbq: Prepare a mailbox command for configuring an HBQ. + * @phba: pointer to lpfc hba data structure. + * @id: HBQ identifier. + * @hbq_desc: pointer to the HBA descriptor data structure. + * @hbq_entry_index: index of the HBQ entry data structures. + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * The configure HBQ (Host Buffer Queue) mailbox command is used to configure + * an HBQ. The configuration binds events that require buffers to a particular + * ring and HBQ based on a selection profile. + * + * This routine prepares the mailbox command for configuring an HBQ. + **/ void lpfc_config_hbq(struct lpfc_hba *phba, uint32_t id, struct lpfc_hbq_init *hbq_desc, @@ -641,8 +887,23 @@ lpfc_config_hbq(struct lpfc_hba *phba, uint32_t id, return; } - - +/** + * lpfc_config_ring: Prepare a mailbox command for configuring an IOCB ring. + * @phba: pointer to lpfc hba data structure. + * @ring: + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * The configure ring mailbox command is used to configure an IOCB ring. This + * configuration binds from one to six of HBA RC_CTL/TYPE mask entries to the + * ring. This is used to map incoming sequences to a particular ring whose + * RC_CTL/TYPE mask entry matches that of the sequence. The driver should not + * attempt to configure a ring whose number is greater than the number + * specified in the Port Control Block (PCB). It is an error to issue the + * configure ring command more than once with the same ring number. The HBA + * returns an error if the driver attempts this. + * + * This routine prepares the mailbox command for configuring IOCB ring. + **/ void lpfc_config_ring(struct lpfc_hba * phba, int ring, LPFC_MBOXQ_t * pmb) { @@ -684,6 +945,20 @@ lpfc_config_ring(struct lpfc_hba * phba, int ring, LPFC_MBOXQ_t * pmb) return; } +/** + * lpfc_config_port: Prepare a mailbox command for configuring port. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * The configure port mailbox command is used to identify the Port Control + * Block (PCB) in the driver memory. After this command is issued, the + * driver must not access the mailbox in the HBA without first resetting + * the HBA. The HBA may copy the PCB information to internal storage for + * subsequent use; the driver can not change the PCB information unless it + * resets the HBA. + * + * This routine prepares the mailbox command for configuring port. + **/ void lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) { @@ -839,6 +1114,21 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) sizeof(PCB_t)); } +/** + * lpfc_kill_board: Prepare a mailbox command for killing board. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * The kill board mailbox command is used to tell firmware to perform a + * graceful shutdown of a channel on a specified board to prepare for reset. + * When the kill board mailbox command is received, the ER3 bit is set to 1 + * in the Host Status register and the ER Attention bit is set to 1 in the + * Host Attention register of the HBA function that received the kill board + * command. + * + * This routine prepares the mailbox command for killing the board in + * preparation for a graceful shutdown. + **/ void lpfc_kill_board(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) { @@ -850,6 +1140,16 @@ lpfc_kill_board(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) return; } +/** + * lpfc_mbox_put: Put a mailbox cmd into the tail of driver's mailbox queue. + * @phba: pointer to lpfc hba data structure. + * @mbq: pointer to the driver internal queue element for mailbox command. + * + * Driver maintains a internal mailbox command queue implemented as a linked + * list. When a mailbox command is issued, it shall be put into the mailbox + * command queue such that they shall be processed orderly as HBA can process + * one mailbox command at a time. + **/ void lpfc_mbox_put(struct lpfc_hba * phba, LPFC_MBOXQ_t * mbq) { @@ -864,6 +1164,20 @@ lpfc_mbox_put(struct lpfc_hba * phba, LPFC_MBOXQ_t * mbq) return; } +/** + * lpfc_mbox_get: Remove a mailbox cmd from the head of driver's mailbox queue. + * @phba: pointer to lpfc hba data structure. + * + * Driver maintains a internal mailbox command queue implemented as a linked + * list. When a mailbox command is issued, it shall be put into the mailbox + * command queue such that they shall be processed orderly as HBA can process + * one mailbox command at a time. After HBA finished processing a mailbox + * command, the driver will remove a pending mailbox command from the head of + * the mailbox command queue and send to the HBA for processing. + * + * Return codes + * pointer to the driver internal queue element for mailbox command. + **/ LPFC_MBOXQ_t * lpfc_mbox_get(struct lpfc_hba * phba) { @@ -877,6 +1191,17 @@ lpfc_mbox_get(struct lpfc_hba * phba) return mbq; } +/** + * lpfc_mbox_cmpl_put: Put mailbox command into mailbox command complete list. + * @phba: pointer to lpfc hba data structure. + * @mbq: pointer to the driver internal queue element for mailbox command. + * + * This routine put the completed mailbox command into the mailbox command + * complete list. This routine is called from driver interrupt handler + * context.The mailbox complete list is used by the driver worker thread + * to process mailbox complete callback functions outside the driver interrupt + * handler. + **/ void lpfc_mbox_cmpl_put(struct lpfc_hba * phba, LPFC_MBOXQ_t * mbq) { @@ -887,6 +1212,17 @@ lpfc_mbox_cmpl_put(struct lpfc_hba * phba, LPFC_MBOXQ_t * mbq) return; } +/** + * lpfc_mbox_tmo_val: Retrieve mailbox command timeout value. + * @phba: pointer to lpfc hba data structure. + * @cmd: mailbox command code. + * + * This routine retrieves the proper timeout value according to the mailbox + * command code. + * + * Return codes + * Timeout value to be used for the given mailbox command + **/ int lpfc_mbox_tmo_val(struct lpfc_hba *phba, int cmd) { diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c index 3c0cebc7180..50d9136a6e0 100644 --- a/drivers/scsi/lpfc/lpfc_mem.c +++ b/drivers/scsi/lpfc/lpfc_mem.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2006 Emulex. All rights reserved. * + * Copyright (C) 2004-2008 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * @@ -39,7 +39,21 @@ #define LPFC_MEM_POOL_SIZE 64 /* max elem in non-DMA safety pool */ - +/** + * lpfc_mem_alloc: create and allocate all PCI and memory pools + * @phba: HBA to allocate pools for + * + * Description: Creates and allocates PCI pools lpfc_scsi_dma_buf_pool, + * lpfc_mbuf_pool, lpfc_hbq_pool. Creates and allocates kmalloc-backed mempools + * for LPFC_MBOXQ_t and lpfc_nodelist. Also allocates the VPI bitmask. + * + * Notes: Not interrupt-safe. Must be called with no locks held. If any + * allocation fails, frees all successfully allocated memory before returning. + * + * Returns: + * 0 on success + * -ENOMEM on failure (if any memory allocations fail) + **/ int lpfc_mem_alloc(struct lpfc_hba * phba) { @@ -120,6 +134,16 @@ lpfc_mem_alloc(struct lpfc_hba * phba) return -ENOMEM; } +/** + * lpfc_mem_free: Frees all PCI and memory allocated by lpfc_mem_alloc + * @phba: HBA to free memory for + * + * Description: Frees PCI pools lpfc_scsi_dma_buf_pool, lpfc_mbuf_pool, + * lpfc_hbq_pool. Frees kmalloc-backed mempools for LPFC_MBOXQ_t and + * lpfc_nodelist. Also frees the VPI bitmask. + * + * Returns: None + **/ void lpfc_mem_free(struct lpfc_hba * phba) { @@ -181,12 +205,29 @@ lpfc_mem_free(struct lpfc_hba * phba) phba->lpfc_scsi_dma_buf_pool = NULL; phba->lpfc_mbuf_pool = NULL; - /* Free the iocb lookup array */ + /* Free the iocb lookup array */ kfree(psli->iocbq_lookup); psli->iocbq_lookup = NULL; - } +/** + * lpfc_mbuf_alloc: Allocate an mbuf from the lpfc_mbuf_pool PCI pool + * @phba: HBA which owns the pool to allocate from + * @mem_flags: indicates if this is a priority (MEM_PRI) allocation + * @handle: used to return the DMA-mapped address of the mbuf + * + * Description: Allocates a DMA-mapped buffer from the lpfc_mbuf_pool PCI pool. + * Allocates from generic pci_pool_alloc function first and if that fails and + * mem_flags has MEM_PRI set (the only defined flag), returns an mbuf from the + * HBA's pool. + * + * Notes: Not interrupt-safe. Must be called with no locks held. Takes + * phba->hbalock. + * + * Returns: + * pointer to the allocated mbuf on success + * NULL on failure + **/ void * lpfc_mbuf_alloc(struct lpfc_hba *phba, int mem_flags, dma_addr_t *handle) { @@ -206,6 +247,20 @@ lpfc_mbuf_alloc(struct lpfc_hba *phba, int mem_flags, dma_addr_t *handle) return ret; } +/** + * __lpfc_mem_free: Free an mbuf from the lpfc_mbuf_pool PCI pool (locked) + * @phba: HBA which owns the pool to return to + * @virt: mbuf to free + * @dma: the DMA-mapped address of the lpfc_mbuf_pool to be freed + * + * Description: Returns an mbuf lpfc_mbuf_pool to the lpfc_mbuf_safety_pool if + * it is below its max_count, frees the mbuf otherwise. + * + * Notes: Must be called with phba->hbalock held to synchronize access to + * lpfc_mbuf_safety_pool. + * + * Returns: None + **/ void __lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma) { @@ -221,7 +276,21 @@ __lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma) return; } +/** + * lpfc_mem_free: Free an mbuf from the lpfc_mbuf_pool PCI pool (unlocked) + * @phba: HBA which owns the pool to return to + * @virt: mbuf to free + * @dma: the DMA-mapped address of the lpfc_mbuf_pool to be freed + * + * Description: Returns an mbuf lpfc_mbuf_pool to the lpfc_mbuf_safety_pool if + * it is below its max_count, frees the mbuf otherwise. + * + * Notes: Takes phba->hbalock. Can be called with or without other locks held. + * + * Returns: None + **/ void + lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma) { unsigned long iflags; @@ -232,6 +301,19 @@ lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma) return; } +/** + * lpfc_els_hbq_alloc: Allocate an HBQ buffer + * @phba: HBA to allocate HBQ buffer for + * + * Description: Allocates a DMA-mapped HBQ buffer from the lpfc_hbq_pool PCI + * pool along a non-DMA-mapped container for it. + * + * Notes: Not interrupt-safe. Must be called with no locks held. + * + * Returns: + * pointer to HBQ on success + * NULL on failure + **/ struct hbq_dmabuf * lpfc_els_hbq_alloc(struct lpfc_hba *phba) { @@ -251,6 +333,18 @@ lpfc_els_hbq_alloc(struct lpfc_hba *phba) return hbqbp; } +/** + * lpfc_mem_hbq_free: Frees an HBQ buffer allocated with lpfc_els_hbq_alloc + * @phba: HBA buffer was allocated for + * @hbqbp: HBQ container returned by lpfc_els_hbq_alloc + * + * Description: Frees both the container and the DMA-mapped buffer returned by + * lpfc_els_hbq_alloc. + * + * Notes: Can be called with or without locks held. + * + * Returns: None + **/ void lpfc_els_hbq_free(struct lpfc_hba *phba, struct hbq_dmabuf *hbqbp) { @@ -259,7 +353,18 @@ lpfc_els_hbq_free(struct lpfc_hba *phba, struct hbq_dmabuf *hbqbp) return; } -/* This is ONLY called for the LPFC_ELS_HBQ */ +/** + * lpfc_in_buf_free: Free a DMA buffer + * @phba: HBA buffer is associated with + * @mp: Buffer to free + * + * Description: Frees the given DMA buffer in the appropriate way given if the + * HBA is running in SLI3 mode with HBQs enabled. + * + * Notes: Takes phba->hbalock. Can be called with or without other locks held. + * + * Returns: None + **/ void lpfc_in_buf_free(struct lpfc_hba *phba, struct lpfc_dmabuf *mp) { diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 50fe0764673..3cf488496d8 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -66,10 +66,16 @@ typedef enum _lpfc_iocb_type { LPFC_ABORT_IOCB } lpfc_iocb_type; - /* SLI-2/SLI-3 provide different sized iocbs. Given a pointer - * to the start of the ring, and the slot number of the - * desired iocb entry, calc a pointer to that entry. - */ +/** + * lpfc_cmd_iocb: Get next command iocb entry in the ring. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * + * This function returns pointer to next command iocb entry + * in the command ring. The caller must hold hbalock to prevent + * other threads consume the next command iocb. + * SLI-2/SLI-3 provide different sized iocbs. + **/ static inline IOCB_t * lpfc_cmd_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) { @@ -77,6 +83,16 @@ lpfc_cmd_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) pring->cmdidx * phba->iocb_cmd_size); } +/** + * lpfc_resp_iocb: Get next response iocb entry in the ring. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * + * This function returns pointer to next response iocb entry + * in the response ring. The caller must hold hbalock to make sure + * that no other thread consume the next response iocb. + * SLI-2/SLI-3 provide different sized iocbs. + **/ static inline IOCB_t * lpfc_resp_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) { @@ -84,6 +100,15 @@ lpfc_resp_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) pring->rspidx * phba->iocb_rsp_size); } +/** + * __lpfc_sli_get_iocbq: Allocates an iocb object from iocb pool. + * @phba: Pointer to HBA context object. + * + * This function is called with hbalock held. This function + * allocates a new driver iocb object from the iocb pool. If the + * allocation is successful, it returns pointer to the newly + * allocated iocb object else it returns NULL. + **/ static struct lpfc_iocbq * __lpfc_sli_get_iocbq(struct lpfc_hba *phba) { @@ -94,6 +119,15 @@ __lpfc_sli_get_iocbq(struct lpfc_hba *phba) return iocbq; } +/** + * lpfc_sli_get_iocbq: Allocates an iocb object from iocb pool. + * @phba: Pointer to HBA context object. + * + * This function is called with no lock held. This function + * allocates a new driver iocb object from the iocb pool. If the + * allocation is successful, it returns pointer to the newly + * allocated iocb object else it returns NULL. + **/ struct lpfc_iocbq * lpfc_sli_get_iocbq(struct lpfc_hba *phba) { @@ -106,6 +140,16 @@ lpfc_sli_get_iocbq(struct lpfc_hba *phba) return iocbq; } +/** + * __lpfc_sli_release_iocbq: Release iocb to the iocb pool. + * @phba: Pointer to HBA context object. + * @iocbq: Pointer to driver iocb object. + * + * This function is called with hbalock held to release driver + * iocb object to the iocb pool. The iotag in the iocb object + * does not change for each use of the iocb object. This function + * clears all other fields of the iocb object when it is freed. + **/ static void __lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq) { @@ -118,6 +162,14 @@ __lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq) list_add_tail(&iocbq->list, &phba->lpfc_iocb_list); } +/** + * lpfc_sli_release_iocbq: Release iocb to the iocb pool. + * @phba: Pointer to HBA context object. + * @iocbq: Pointer to driver iocb object. + * + * This function is called with no lock held to release the iocb to + * iocb pool. + **/ void lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq) { @@ -131,10 +183,21 @@ lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq) spin_unlock_irqrestore(&phba->hbalock, iflags); } -/* - * Translate the iocb command to an iocb command type used to decide the final - * disposition of each completed IOCB. - */ +/** + * lpfc_sli_iocb_cmd_type: Get the iocb type. + * @iocb_cmnd : iocb command code. + * + * This function is called by ring event handler function to get the iocb type. + * This function translates the iocb command to an iocb command type used to + * decide the final disposition of each completed IOCB. + * The function returns + * LPFC_UNKNOWN_IOCB if it is an unsupported iocb + * LPFC_SOL_IOCB if it is a solicited iocb completion + * LPFC_ABORT_IOCB if it is an abort iocb + * LPFC_UNSOL_IOCB if it is an unsolicited iocb + * + * The caller is not required to hold any lock. + **/ static lpfc_iocb_type lpfc_sli_iocb_cmd_type(uint8_t iocb_cmnd) { @@ -230,6 +293,17 @@ lpfc_sli_iocb_cmd_type(uint8_t iocb_cmnd) return type; } +/** + * lpfc_sli_ring_map: Issue config_ring mbox for all rings. + * @phba: Pointer to HBA context object. + * + * This function is called from SLI initialization code + * to configure every ring of the HBA's SLI interface. The + * caller is not required to hold any lock. This function issues + * a config_ring mailbox command for each ring. + * This function returns zero if successful else returns a negative + * error code. + **/ static int lpfc_sli_ring_map(struct lpfc_hba *phba) { @@ -262,6 +336,18 @@ lpfc_sli_ring_map(struct lpfc_hba *phba) return ret; } +/** + * lpfc_sli_ringtxcmpl_put: Adds new iocb to the txcmplq. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * @piocb: Pointer to the driver iocb object. + * + * This function is called with hbalock held. The function adds the + * new iocb to txcmplq of the given ring. This function always returns + * 0. If this function is called for ELS ring, this function checks if + * there is a vport associated with the ELS command. This function also + * starts els_tmofunc timer if this is an ELS command. + **/ static int lpfc_sli_ringtxcmpl_put(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, struct lpfc_iocbq *piocb) @@ -282,6 +368,16 @@ lpfc_sli_ringtxcmpl_put(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, return 0; } +/** + * lpfc_sli_ringtx_get: Get first element of the txq. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * + * This function is called with hbalock held to get next + * iocb in txq of the given ring. If there is any iocb in + * the txq, the function returns first iocb in the list after + * removing the iocb from the list, else it returns NULL. + **/ static struct lpfc_iocbq * lpfc_sli_ringtx_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) { @@ -293,6 +389,20 @@ lpfc_sli_ringtx_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) return cmd_iocb; } +/** + * lpfc_sli_next_iocb_slot: Get next iocb slot in the ring. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * + * This function is called with hbalock held and the caller must post the + * iocb without releasing the lock. If the caller releases the lock, + * iocb slot returned by the function is not guaranteed to be available. + * The function returns pointer to the next available iocb slot if there + * is available slot in the ring, else it returns NULL. + * If the get index of the ring is ahead of the put index, the function + * will post an error attention event to the worker thread to take the + * HBA to offline state. + **/ static IOCB_t * lpfc_sli_next_iocb_slot (struct lpfc_hba *phba, struct lpfc_sli_ring *pring) { @@ -336,6 +446,18 @@ lpfc_sli_next_iocb_slot (struct lpfc_hba *phba, struct lpfc_sli_ring *pring) return lpfc_cmd_iocb(phba, pring); } +/** + * lpfc_sli_next_iotag: Get an iotag for the iocb. + * @phba: Pointer to HBA context object. + * @iocbq: Pointer to driver iocb object. + * + * This function gets an iotag for the iocb. If there is no unused iotag and + * the iocbq_lookup_len < 0xffff, this function allocates a bigger iotag_lookup + * array and assigns a new iotag. + * The function returns the allocated iotag if successful, else returns zero. + * Zero is not a valid iotag. + * The caller is not required to hold any lock. + **/ uint16_t lpfc_sli_next_iotag(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq) { @@ -399,6 +521,20 @@ lpfc_sli_next_iotag(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq) return 0; } +/** + * lpfc_sli_submit_iocb: Submit an iocb to the firmware. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * @iocb: Pointer to iocb slot in the ring. + * @nextiocb: Pointer to driver iocb object which need to be + * posted to firmware. + * + * This function is called with hbalock held to post a new iocb to + * the firmware. This function copies the new iocb to ring iocb slot and + * updates the ring pointers. It adds the new iocb to txcmplq if there is + * a completion call back for this iocb else the function will free the + * iocb object. + **/ static void lpfc_sli_submit_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, IOCB_t *iocb, struct lpfc_iocbq *nextiocb) @@ -441,6 +577,18 @@ lpfc_sli_submit_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, writel(pring->cmdidx, &phba->host_gp[pring->ringno].cmdPutInx); } +/** + * lpfc_sli_update_full_ring: Update the chip attention register. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * + * The caller is not required to hold any lock for calling this function. + * This function updates the chip attention bits for the ring to inform firmware + * that there are pending work to be done for this ring and requests an + * interrupt when there is space available in the ring. This function is + * called when the driver is unable to post more iocbs to the ring due + * to unavailability of space in the ring. + **/ static void lpfc_sli_update_full_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) { @@ -460,6 +608,15 @@ lpfc_sli_update_full_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) pring->stats.iocb_cmd_full++; } +/** + * lpfc_sli_update_ring: Update chip attention register. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * + * This function updates the chip attention register bit for the + * given ring to inform HBA that there is more work to be done + * in this ring. The caller is not required to hold any lock. + **/ static void lpfc_sli_update_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) { @@ -473,6 +630,15 @@ lpfc_sli_update_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) readl(phba->CAregaddr); /* flush */ } +/** + * lpfc_sli_resume_iocb: Process iocbs in the txq. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * + * This function is called with hbalock held to post pending iocbs + * in the txq to the firmware. This function is called when driver + * detects space available in the ring. + **/ static void lpfc_sli_resume_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) { @@ -504,6 +670,16 @@ lpfc_sli_resume_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) return; } +/** + * lpfc_sli_next_hbq_slot: Get next hbq entry for the HBQ. + * @phba: Pointer to HBA context object. + * @hbqno: HBQ number. + * + * This function is called with hbalock held to get the next + * available slot for the given HBQ. If there is free slot + * available for the HBQ it will return pointer to the next available + * HBQ entry else it will return NULL. + **/ static struct lpfc_hbq_entry * lpfc_sli_next_hbq_slot(struct lpfc_hba *phba, uint32_t hbqno) { @@ -539,6 +715,15 @@ lpfc_sli_next_hbq_slot(struct lpfc_hba *phba, uint32_t hbqno) hbqp->hbqPutIdx; } +/** + * lpfc_sli_hbqbuf_free_all: Free all the hbq buffers. + * @phba: Pointer to HBA context object. + * + * This function is called with no lock held to free all the + * hbq buffers while uninitializing the SLI interface. It also + * frees the HBQ buffers returned by the firmware but not yet + * processed by the upper layers. + **/ void lpfc_sli_hbqbuf_free_all(struct lpfc_hba *phba) { @@ -584,6 +769,18 @@ lpfc_sli_hbqbuf_free_all(struct lpfc_hba *phba) spin_unlock_irqrestore(&phba->hbalock, flags); } +/** + * lpfc_sli_hbq_to_firmware: Post the hbq buffer to firmware. + * @phba: Pointer to HBA context object. + * @hbqno: HBQ number. + * @hbq_buf: Pointer to HBQ buffer. + * + * This function is called with the hbalock held to post a + * hbq buffer to the firmware. If the function finds an empty + * slot in the HBQ, it will post the buffer. The function will return + * pointer to the hbq entry if it successfully post the buffer + * else it will return NULL. + **/ static struct lpfc_hbq_entry * lpfc_sli_hbq_to_firmware(struct lpfc_hba *phba, uint32_t hbqno, struct hbq_dmabuf *hbq_buf) @@ -612,6 +809,7 @@ lpfc_sli_hbq_to_firmware(struct lpfc_hba *phba, uint32_t hbqno, return hbqe; } +/* HBQ for ELS and CT traffic. */ static struct lpfc_hbq_init lpfc_els_hbq = { .rn = 1, .entry_count = 200, @@ -623,6 +821,7 @@ static struct lpfc_hbq_init lpfc_els_hbq = { .add_count = 5, }; +/* HBQ for the extra ring if needed */ static struct lpfc_hbq_init lpfc_extra_hbq = { .rn = 1, .entry_count = 200, @@ -634,11 +833,22 @@ static struct lpfc_hbq_init lpfc_extra_hbq = { .add_count = 5, }; +/* Array of HBQs */ struct lpfc_hbq_init *lpfc_hbq_defs[] = { &lpfc_els_hbq, &lpfc_extra_hbq, }; +/** + * lpfc_sli_hbqbuf_fill_hbqs: Post more hbq buffers to HBQ. + * @phba: Pointer to HBA context object. + * @hbqno: HBQ number. + * @count: Number of HBQ buffers to be posted. + * + * This function is called with no lock held to post more + * hbq buffers to the given HBQ. The function returns 0 + * when successful and returns 1 other wise. + **/ static int lpfc_sli_hbqbuf_fill_hbqs(struct lpfc_hba *phba, uint32_t hbqno, uint32_t count) { @@ -679,6 +889,15 @@ lpfc_sli_hbqbuf_fill_hbqs(struct lpfc_hba *phba, uint32_t hbqno, uint32_t count) return 1; } +/** + * lpfc_sli_hbqbuf_add_hbqs: Post more HBQ buffers to firmware. + * @phba: Pointer to HBA context object. + * @qno: HBQ number. + * + * This function posts more buffers to the HBQ. This function + * is called with no lock held. The function returns 0 when + * successful and returns 1 otherwise. + **/ int lpfc_sli_hbqbuf_add_hbqs(struct lpfc_hba *phba, uint32_t qno) { @@ -686,6 +905,15 @@ lpfc_sli_hbqbuf_add_hbqs(struct lpfc_hba *phba, uint32_t qno) lpfc_hbq_defs[qno]->add_count)); } +/** + * lpfc_sli_hbqbuf_init_hbqs: Post initial buffers to the HBQ. + * @phba: Pointer to HBA context object. + * @qno: HBQ queue number. + * + * This function is called from SLI initialization code path with + * no lock held to post initial HBQ buffers to firmware. The + * function returns 0 when successful and returns 1 otherwise. + **/ static int lpfc_sli_hbqbuf_init_hbqs(struct lpfc_hba *phba, uint32_t qno) { @@ -693,6 +921,16 @@ lpfc_sli_hbqbuf_init_hbqs(struct lpfc_hba *phba, uint32_t qno) lpfc_hbq_defs[qno]->init_count)); } +/** + * lpfc_sli_hbqbuf_find: Find the hbq buffer associated with a tag. + * @phba: Pointer to HBA context object. + * @tag: Tag of the hbq buffer. + * + * This function is called with hbalock held. This function searches + * for the hbq buffer associated with the given tag in the hbq buffer + * list. If it finds the hbq buffer, it returns the hbq_buffer other wise + * it returns NULL. + **/ static struct hbq_dmabuf * lpfc_sli_hbqbuf_find(struct lpfc_hba *phba, uint32_t tag) { @@ -716,6 +954,15 @@ lpfc_sli_hbqbuf_find(struct lpfc_hba *phba, uint32_t tag) return NULL; } +/** + * lpfc_sli_free_hbq: Give back the hbq buffer to firmware. + * @phba: Pointer to HBA context object. + * @hbq_buffer: Pointer to HBQ buffer. + * + * This function is called with hbalock. This function gives back + * the hbq buffer to firmware. If the HBQ does not have space to + * post the buffer, it will free the buffer. + **/ void lpfc_sli_free_hbq(struct lpfc_hba *phba, struct hbq_dmabuf *hbq_buffer) { @@ -729,6 +976,15 @@ lpfc_sli_free_hbq(struct lpfc_hba *phba, struct hbq_dmabuf *hbq_buffer) } } +/** + * lpfc_sli_chk_mbx_command: Check if the mailbox is a legitimate mailbox. + * @mbxCommand: mailbox command code. + * + * This function is called by the mailbox event handler function to verify + * that the completed mailbox command is a legitimate mailbox command. If the + * completed mailbox is not known to the function, it will return MBX_SHUTDOWN + * and the mailbox event handler will take the HBA offline. + **/ static int lpfc_sli_chk_mbx_command(uint8_t mbxCommand) { @@ -793,6 +1049,19 @@ lpfc_sli_chk_mbx_command(uint8_t mbxCommand) } return ret; } + +/** + * lpfc_sli_wake_mbox_wait: Completion handler for mbox issued from + * lpfc_sli_issue_mbox_wait. + * @phba: Pointer to HBA context object. + * @pmboxq: Pointer to mailbox command. + * + * This is completion handler function for mailbox commands issued from + * lpfc_sli_issue_mbox_wait function. This function is called by the + * mailbox event handler function with no lock held. This function + * will wake up thread waiting on the wait queue pointed by context1 + * of the mailbox. + **/ static void lpfc_sli_wake_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) { @@ -812,6 +1081,17 @@ lpfc_sli_wake_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) return; } + +/** + * lpfc_sli_def_mbox_cmpl: Default mailbox completion handler. + * @phba: Pointer to HBA context object. + * @pmb: Pointer to mailbox object. + * + * This function is the default mailbox completion handler. It + * frees the memory resources associated with the completed mailbox + * command. If the completed command is a REG_LOGIN mailbox command, + * this function will issue a UREG_LOGIN to re-claim the RPI. + **/ void lpfc_sli_def_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) { @@ -846,6 +1126,19 @@ lpfc_sli_def_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) return; } +/** + * lpfc_sli_handle_mb_event: Handle mailbox completions from firmware. + * @phba: Pointer to HBA context object. + * + * This function is called with no lock held. This function processes all + * the completed mailbox commands and gives it to upper layers. The interrupt + * service routine processes mailbox completion interrupt and adds completed + * mailbox commands to the mboxq_cmpl queue and signals the worker thread. + * Worker thread call lpfc_sli_handle_mb_event, which will return the + * completed mailbox commands in mboxq_cmpl queue to the upper layers. This + * function returns the mailbox commands to the upper layer by calling the + * completion handler function of each mailbox. + **/ int lpfc_sli_handle_mb_event(struct lpfc_hba *phba) { @@ -953,6 +1246,16 @@ lpfc_sli_handle_mb_event(struct lpfc_hba *phba) return 0; } +/** + * lpfc_sli_replace_hbqbuff: Replace the HBQ buffer with a new buffer. + * @phba: Pointer to HBA context object. + * @tag: Tag for the HBQ buffer. + * + * This function is called from unsolicited event handler code path to get the + * HBQ buffer associated with an unsolicited iocb. This function is called with + * no lock held. It returns the buffer associated with the given tag and posts + * another buffer to the firmware. + **/ static struct lpfc_dmabuf * lpfc_sli_replace_hbqbuff(struct lpfc_hba *phba, uint32_t tag) { @@ -997,6 +1300,18 @@ lpfc_sli_replace_hbqbuff(struct lpfc_hba *phba, uint32_t tag) return &new_hbq_entry->dbuf; } +/** + * lpfc_sli_get_buff: Get the buffer associated with the buffer tag. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * @tag: buffer tag. + * + * This function is called with no lock held. When QUE_BUFTAG_BIT bit + * is set in the tag the buffer is posted for a particular exchange, + * the function will return the buffer without replacing the buffer. + * If the buffer is for unsolicited ELS or CT traffic, this function + * returns the buffer and also posts another buffer to the firmware. + **/ static struct lpfc_dmabuf * lpfc_sli_get_buff(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, @@ -1008,6 +1323,21 @@ lpfc_sli_get_buff(struct lpfc_hba *phba, return lpfc_sli_replace_hbqbuff(phba, tag); } + +/** + * lpfc_sli_process_unsol_iocb: Unsolicited iocb handler. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * @saveq: Pointer to the unsolicited iocb. + * + * This function is called with no lock held by the ring event handler + * when there is an unsolicited iocb posted to the response ring by the + * firmware. This function gets the buffer associated with the iocbs + * and calls the event handler for the ring. This function handles both + * qring buffers and hbq buffers. + * When the function returns 1 the caller can free the iocb object otherwise + * upper layer functions will free the iocb objects. + **/ static int lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, struct lpfc_iocbq *saveq) @@ -1192,6 +1522,18 @@ lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, return 1; } +/** + * lpfc_sli_iocbq_lookup: Find command iocb for the given response iocb. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * @prspiocb: Pointer to response iocb object. + * + * This function looks up the iocb_lookup table to get the command iocb + * corresponding to the given response iocb using the iotag of the + * response iocb. This function is called with the hbalock held. + * This function returns the command iocb object if it finds the command + * iocb else returns NULL. + **/ static struct lpfc_iocbq * lpfc_sli_iocbq_lookup(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, @@ -1217,6 +1559,23 @@ lpfc_sli_iocbq_lookup(struct lpfc_hba *phba, return NULL; } +/** + * lpfc_sli_process_sol_iocb: process solicited iocb completion. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * @saveq: Pointer to the response iocb to be processed. + * + * This function is called by the ring event handler for non-fcp + * rings when there is a new response iocb in the response ring. + * The caller is not required to hold any locks. This function + * gets the command iocb associated with the response iocb and + * calls the completion handler for the command iocb. If there + * is no completion handler, the function will free the resources + * associated with command iocb. If the response iocb is for + * an already aborted command iocb, the status of the completion + * is changed to IOSTAT_LOCAL_REJECT/IOERR_SLI_ABORTED. + * This function always returns 1. + **/ static int lpfc_sli_process_sol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, struct lpfc_iocbq *saveq) @@ -1282,6 +1641,16 @@ lpfc_sli_process_sol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, return rc; } +/** + * lpfc_sli_rsp_pointers_error: Response ring pointer error handler. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * + * This function is called from the iocb ring event handlers when + * put pointer is ahead of the get pointer for a ring. This function signal + * an error attention condition to the worker thread and the worker + * thread will transition the HBA to offline state. + **/ static void lpfc_sli_rsp_pointers_error(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) { @@ -1312,6 +1681,21 @@ lpfc_sli_rsp_pointers_error(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) return; } +/** + * lpfc_sli_poll_fcp_ring: Handle FCP ring completion in polling mode. + * @phba: Pointer to HBA context object. + * + * This function is called from lpfc_queuecommand, lpfc_poll_timeout, + * lpfc_abort_handler and lpfc_slave_configure when FCP_RING_POLLING + * is enabled. + * + * The caller does not hold any lock. + * The function processes each response iocb in the response ring until it + * finds an iocb with LE bit set and chains all the iocbs upto the iocb with + * LE bit set. The function will call the completion handler of the command iocb + * if the response iocb indicates a completion for a command iocb or it is + * an abort completion. + **/ void lpfc_sli_poll_fcp_ring(struct lpfc_hba *phba) { struct lpfc_sli *psli = &phba->sli; @@ -1465,10 +1849,23 @@ void lpfc_sli_poll_fcp_ring(struct lpfc_hba *phba) return; } -/* +/** + * lpfc_sli_handle_fast_ring_event: Handle ring events on FCP ring. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * @mask: Host attention register mask for this ring. + * + * This function is called from the interrupt context when there is a ring + * event for the fcp ring. The caller does not hold any lock. + * The function processes each response iocb in the response ring until it + * finds an iocb with LE bit set and chains all the iocbs upto the iocb with + * LE bit set. The function will call the completion handler of the command iocb + * if the response iocb indicates a completion for a command iocb or it is + * an abort completion. The function will call lpfc_sli_process_unsol_iocb + * function if this is an unsolicited iocb. * This routine presumes LPFC_FCP_RING handling and doesn't bother - * to check it explicitly. - */ + * to check it explicitly. This function always returns 1. + **/ static int lpfc_sli_handle_fast_ring_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, uint32_t mask) @@ -1646,6 +2043,23 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba *phba, return rc; } +/** + * lpfc_sli_handle_slow_ring_event: Handle ring events for non-FCP rings. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * @mask: Host attention register mask for this ring. + * + * This function is called from the worker thread when there is a ring + * event for non-fcp rings. The caller does not hold any lock . + * The function processes each response iocb in the response ring until it + * finds an iocb with LE bit set and chains all the iocbs upto the iocb with + * LE bit set. The function will call lpfc_sli_process_sol_iocb function if the + * response iocb indicates a completion of a command iocb. The function + * will call lpfc_sli_process_unsol_iocb function if this is an unsolicited + * iocb. The function frees the resources or calls the completion handler if + * this iocb is an abort completion. The function returns 0 when the allocated + * iocbs are not freed, otherwise returns 1. + **/ int lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, uint32_t mask) @@ -1904,6 +2318,16 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba, return rc; } +/** + * lpfc_sli_abort_iocb_ring: Abort all iocbs in the ring. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * + * This function aborts all iocbs in the given ring and frees all the iocb + * objects in txq. This function issues an abort iocb for all the iocb commands + * in txcmplq. The iocbs in the txcmplq is not guaranteed to complete before + * the return of this function. The caller is not required to hold any locks. + **/ void lpfc_sli_abort_iocb_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) { @@ -1943,6 +2367,19 @@ lpfc_sli_abort_iocb_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) } } +/** + * lpfc_sli_brdready: Check for host status bits. + * @phba: Pointer to HBA context object. + * @mask: Bit mask to be checked. + * + * This function reads the host status register and compares + * with the provided bit mask to check if HBA completed + * the restart. This function will wait in a loop for the + * HBA to complete restart. If the HBA does not restart within + * 15 iterations, the function will reset the HBA again. The + * function returns 1 when HBA fail to restart otherwise returns + * zero. + **/ int lpfc_sli_brdready(struct lpfc_hba *phba, uint32_t mask) { @@ -1990,6 +2427,13 @@ lpfc_sli_brdready(struct lpfc_hba *phba, uint32_t mask) #define BARRIER_TEST_PATTERN (0xdeadbeef) +/** + * lpfc_reset_barrier: Make HBA ready for HBA reset. + * @phba: Pointer to HBA context object. + * + * This function is called before resetting an HBA. This + * function requests HBA to quiesce DMAs before a reset. + **/ void lpfc_reset_barrier(struct lpfc_hba *phba) { uint32_t __iomem *resp_buf; @@ -2063,6 +2507,17 @@ restore_hc: readl(phba->HCregaddr); /* flush */ } +/** + * lpfc_sli_brdkill: Issue a kill_board mailbox command. + * @phba: Pointer to HBA context object. + * + * This function issues a kill_board mailbox command and waits for + * the error attention interrupt. This function is called for stopping + * the firmware processing. The caller is not required to hold any + * locks. This function calls lpfc_hba_down_post function to free + * any pending commands after the kill. The function will return 1 when it + * fails to kill the board else will return 0. + **/ int lpfc_sli_brdkill(struct lpfc_hba *phba) { @@ -2139,6 +2594,17 @@ lpfc_sli_brdkill(struct lpfc_hba *phba) return ha_copy & HA_ERATT ? 0 : 1; } +/** + * lpfc_sli_brdreset: Reset the HBA. + * @phba: Pointer to HBA context object. + * + * This function resets the HBA by writing HC_INITFF to the control + * register. After the HBA resets, this function resets all the iocb ring + * indices. This function disables PCI layer parity checking during + * the reset. + * This function returns 0 always. + * The caller is not required to hold any locks. + **/ int lpfc_sli_brdreset(struct lpfc_hba *phba) { @@ -2191,6 +2657,19 @@ lpfc_sli_brdreset(struct lpfc_hba *phba) return 0; } +/** + * lpfc_sli_brdrestart: Restart the HBA. + * @phba: Pointer to HBA context object. + * + * This function is called in the SLI initialization code path to + * restart the HBA. The caller is not required to hold any lock. + * This function writes MBX_RESTART mailbox command to the SLIM and + * resets the HBA. At the end of the function, it calls lpfc_hba_down_post + * function to free any pending commands. The function enables + * POST only during the first initialization. The function returns zero. + * The function does not guarantee completion of MBX_RESTART mailbox + * command before the return of this function. + **/ int lpfc_sli_brdrestart(struct lpfc_hba *phba) { @@ -2251,6 +2730,16 @@ lpfc_sli_brdrestart(struct lpfc_hba *phba) return 0; } +/** + * lpfc_sli_chipset_init: Wait for the restart of the HBA after a restart. + * @phba: Pointer to HBA context object. + * + * This function is called after a HBA restart to wait for successful + * restart of the HBA. Successful restart of the HBA is indicated by + * HS_FFRDY and HS_MBRDY bits. If the HBA fails to restart even after 15 + * iteration, the function will restart the HBA again. The function returns + * zero if HBA successfully restarted else returns negative error code. + **/ static int lpfc_sli_chipset_init(struct lpfc_hba *phba) { @@ -2336,12 +2825,25 @@ lpfc_sli_chipset_init(struct lpfc_hba *phba) return 0; } +/** + * lpfc_sli_hbq_count: Get the number of HBQs to be configured. + * + * This function calculates and returns the number of HBQs required to be + * configured. + **/ int lpfc_sli_hbq_count(void) { return ARRAY_SIZE(lpfc_hbq_defs); } +/** + * lpfc_sli_hbq_entry_count: Calculate total number of hbq entries. + * + * This function adds the number of hbq entries in every HBQ to get + * the total number of hbq entries required for the HBA and returns + * the total count. + **/ static int lpfc_sli_hbq_entry_count(void) { @@ -2354,12 +2856,27 @@ lpfc_sli_hbq_entry_count(void) return count; } +/** + * lpfc_sli_hbq_size: Calculate memory required for all hbq entries. + * + * This function calculates amount of memory required for all hbq entries + * to be configured and returns the total memory required. + **/ int lpfc_sli_hbq_size(void) { return lpfc_sli_hbq_entry_count() * sizeof(struct lpfc_hbq_entry); } +/** + * lpfc_sli_hbq_setup: configure and initialize HBQs. + * @phba: Pointer to HBA context object. + * + * This function is called during the SLI initialization to configure + * all the HBQs and post buffers to the HBQ. The caller is not + * required to hold any locks. This function will return zero if successful + * else it will return negative error code. + **/ static int lpfc_sli_hbq_setup(struct lpfc_hba *phba) { @@ -2422,6 +2939,19 @@ lpfc_sli_hbq_setup(struct lpfc_hba *phba) return 0; } +/** + * lpfc_do_config_port: Issue config port mailbox command. + * @phba: Pointer to HBA context object. + * @sli_mode: sli mode - 2/3 + * + * This function is called by the sli intialization code path + * to issue config_port mailbox command. This function restarts the + * HBA firmware and issues a config_port mailbox command to configure + * the SLI interface in the sli mode specified by sli_mode + * variable. The caller is not required to hold any locks. + * The function returns 0 if successful, else returns negative error + * code. + **/ static int lpfc_do_config_port(struct lpfc_hba *phba, int sli_mode) { @@ -2500,6 +3030,20 @@ do_prep_failed: return rc; } + +/** + * lpfc_sli_hba_setup: SLI intialization function. + * @phba: Pointer to HBA context object. + * + * This function is the main SLI intialization function. This function + * is called by the HBA intialization code, HBA reset code and HBA + * error attention handler code. Caller is not required to hold any + * locks. This function issues config_port mailbox command to configure + * the SLI, setup iocb rings and HBQ rings. In the end the function + * calls the config_port_post function to issue init_link mailbox + * command and to start the discovery. The function will return zero + * if successful, else it will return negative error code. + **/ int lpfc_sli_hba_setup(struct lpfc_hba *phba) { @@ -2581,19 +3125,19 @@ lpfc_sli_hba_setup_error: return rc; } -/*! lpfc_mbox_timeout - * - * \pre - * \post - * \param hba Pointer to per struct lpfc_hba structure - * \param l1 Pointer to the driver's mailbox queue. - * \return - * void - * - * \b Description: + +/** + * lpfc_mbox_timeout: Timeout call back function for mbox timer. + * @ptr: context object - pointer to hba structure. * - * This routine handles mailbox timeout events at timer interrupt context. - */ + * This is the callback function for mailbox timer. The mailbox + * timer is armed when a new mailbox command is issued and the timer + * is deleted when the mailbox complete. The function is called by + * the kernel timer code when a mailbox does not complete within + * expected time. This function wakes up the worker thread to + * process the mailbox timeout and returns. All the processing is + * done by the worker thread function lpfc_mbox_timeout_handler. + **/ void lpfc_mbox_timeout(unsigned long ptr) { @@ -2612,6 +3156,15 @@ lpfc_mbox_timeout(unsigned long ptr) return; } + +/** + * lpfc_mbox_timeout_handler: Worker thread function to handle mailbox timeout. + * @phba: Pointer to HBA context object. + * + * This function is called from worker thread when a mailbox command times out. + * The caller is not required to hold any locks. This function will reset the + * HBA and recover all the pending commands. + **/ void lpfc_mbox_timeout_handler(struct lpfc_hba *phba) { @@ -2666,6 +3219,32 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba) return; } +/** + * lpfc_sli_issue_mbox: Issue a mailbox command to firmware. + * @phba: Pointer to HBA context object. + * @pmbox: Pointer to mailbox object. + * @flag: Flag indicating how the mailbox need to be processed. + * + * This function is called by discovery code and HBA management code + * to submit a mailbox command to firmware. This function gets the + * hbalock to protect the data structures. + * The mailbox command can be submitted in polling mode, in which case + * this function will wait in a polling loop for the completion of the + * mailbox. + * If the mailbox is submitted in no_wait mode (not polling) the + * function will submit the command and returns immediately without waiting + * for the mailbox completion. The no_wait is supported only when HBA + * is in SLI2/SLI3 mode - interrupts are enabled. + * The SLI interface allows only one mailbox pending at a time. If the + * mailbox is issued in polling mode and there is already a mailbox + * pending, then the function will return an error. If the mailbox is issued + * in NO_WAIT mode and there is a mailbox pending already, the function + * will return MBX_BUSY after queuing the mailbox into mailbox queue. + * The sli layer owns the mailbox object until the completion of mailbox + * command if this function return MBX_BUSY or MBX_SUCCESS. For all other + * return codes the caller owns the mailbox command after the return of + * the function. + **/ int lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag) { @@ -2980,9 +3559,16 @@ out_not_finished: return MBX_NOT_FINISHED; } -/* - * Caller needs to hold lock. - */ +/** + * __lpfc_sli_ringtx_put: Add an iocb to the txq. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * @piocb: Pointer to address of newly added command iocb. + * + * This function is called with hbalock held to add a command + * iocb to the txq when SLI layer cannot submit the command iocb + * to the ring. + **/ static void __lpfc_sli_ringtx_put(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, struct lpfc_iocbq *piocb) @@ -2992,6 +3578,23 @@ __lpfc_sli_ringtx_put(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, pring->txq_cnt++; } +/** + * lpfc_sli_next_iocb: Get the next iocb in the txq. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * @piocb: Pointer to address of newly added command iocb. + * + * This function is called with hbalock held before a new + * iocb is submitted to the firmware. This function checks + * txq to flush the iocbs in txq to Firmware before + * submitting new iocbs to the Firmware. + * If there are iocbs in the txq which need to be submitted + * to firmware, lpfc_sli_next_iocb returns the first element + * of the txq after dequeuing it from txq. + * If there is no iocb in the txq then the function will return + * *piocb and *piocb is set to NULL. Caller needs to check + * *piocb to find if there are more commands in the txq. + **/ static struct lpfc_iocbq * lpfc_sli_next_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, struct lpfc_iocbq **piocb) @@ -3007,9 +3610,30 @@ lpfc_sli_next_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, return nextiocb; } -/* - * Lockless version of lpfc_sli_issue_iocb. - */ +/** + * __lpfc_sli_issue_iocb: Lockless version of lpfc_sli_issue_iocb. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * @piocb: Pointer to command iocb. + * @flag: Flag indicating if this command can be put into txq. + * + * __lpfc_sli_issue_iocb is used by other functions in the driver + * to issue an iocb command to the HBA. If the PCI slot is recovering + * from error state or if HBA is resetting or if LPFC_STOP_IOCB_EVENT + * flag is turned on, the function returns IOCB_ERROR. + * When the link is down, this function allows only iocbs for + * posting buffers. + * This function finds next available slot in the command ring and + * posts the command to the available slot and writes the port + * attention register to request HBA start processing new iocb. + * If there is no slot available in the ring and + * flag & SLI_IOCB_RET_IOCB is set, the new iocb is added to the + * txq, otherwise the function returns IOCB_BUSY. + * + * This function is called with hbalock held. + * The function will return success after it successfully submit the + * iocb to firmware or after adding to the txq. + **/ static int __lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, struct lpfc_iocbq *piocb, uint32_t flag) @@ -3106,6 +3730,19 @@ __lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } +/** + * lpfc_sli_issue_iocb: Wrapper function for __lpfc_sli_issue_iocb. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * @piocb: Pointer to command iocb. + * @flag: Flag indicating if this command can be put into txq. + * + * lpfc_sli_issue_iocb is a wrapper around __lpfc_sli_issue_iocb + * function. This function gets the hbalock and calls + * __lpfc_sli_issue_iocb function and will return the error returned + * by __lpfc_sli_issue_iocb function. This wrapper is used by + * functions which do not hold hbalock. + **/ int lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, struct lpfc_iocbq *piocb, uint32_t flag) @@ -3120,6 +3757,17 @@ lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, return rc; } +/** + * lpfc_extra_ring_setup: Extra ring setup function. + * @phba: Pointer to HBA context object. + * + * This function is called while driver attaches with the + * HBA to setup the extra ring. The extra ring is used + * only when driver needs to support target mode functionality + * or IP over FC functionalities. + * + * This function is called with no lock held. + **/ static int lpfc_extra_ring_setup( struct lpfc_hba *phba) { @@ -3155,6 +3803,19 @@ lpfc_extra_ring_setup( struct lpfc_hba *phba) return 0; } +/** + * lpfc_sli_async_event_handler: ASYNC iocb handler function. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * @iocbq: Pointer to iocb object. + * + * This function is called by the slow ring event handler + * function when there is an ASYNC event iocb in the ring. + * This function is called with no lock held. + * Currently this function handles only temperature related + * ASYNC events. The function decodes the temperature sensor + * event message and posts events for the management applications. + **/ static void lpfc_sli_async_event_handler(struct lpfc_hba * phba, struct lpfc_sli_ring * pring, struct lpfc_iocbq * iocbq) @@ -3210,6 +3871,17 @@ lpfc_sli_async_event_handler(struct lpfc_hba * phba, } +/** + * lpfc_sli_setup: SLI ring setup function. + * @phba: Pointer to HBA context object. + * + * lpfc_sli_setup sets up rings of the SLI interface with + * number of iocbs per ring and iotags. This function is + * called while driver attach to the HBA and before the + * interrupts are enabled. So there is no need for locking. + * + * This function always returns 0. + **/ int lpfc_sli_setup(struct lpfc_hba *phba) { @@ -3321,6 +3993,17 @@ lpfc_sli_setup(struct lpfc_hba *phba) return 0; } +/** + * lpfc_sli_queue_setup: Queue initialization function. + * @phba: Pointer to HBA context object. + * + * lpfc_sli_queue_setup sets up mailbox queues and iocb queues for each + * ring. This function also initializes ring indices of each ring. + * This function is called during the initialization of the SLI + * interface of an HBA. + * This function is called with no lock held and always returns + * 1. + **/ int lpfc_sli_queue_setup(struct lpfc_hba *phba) { @@ -3349,6 +4032,23 @@ lpfc_sli_queue_setup(struct lpfc_hba *phba) return 1; } +/** + * lpfc_sli_host_down: Vport cleanup function. + * @vport: Pointer to virtual port object. + * + * lpfc_sli_host_down is called to clean up the resources + * associated with a vport before destroying virtual + * port data structures. + * This function does following operations: + * - Free discovery resources associated with this virtual + * port. + * - Free iocbs associated with this virtual port in + * the txq. + * - Send abort for all iocb commands associated with this + * vport in txcmplq. + * + * This function is called with no lock held and always returns 1. + **/ int lpfc_sli_host_down(struct lpfc_vport *vport) { @@ -3411,6 +4111,21 @@ lpfc_sli_host_down(struct lpfc_vport *vport) return 1; } +/** + * lpfc_sli_hba_down: Resource cleanup function for the HBA. + * @phba: Pointer to HBA context object. + * + * This function cleans up all iocb, buffers, mailbox commands + * while shutting down the HBA. This function is called with no + * lock held and always returns 1. + * This function does the following to cleanup driver resources: + * - Free discovery resources for each virtual port + * - Cleanup any pending fabric iocbs + * - Iterate through the iocb txq and free each entry + * in the list. + * - Free up any buffer posted to the HBA + * - Free mailbox commands in the mailbox queue. + **/ int lpfc_sli_hba_down(struct lpfc_hba *phba) { @@ -3501,6 +4216,18 @@ lpfc_sli_hba_down(struct lpfc_hba *phba) return 1; } +/** + * lpfc_sli_pcimem_bcopy: SLI memory copy function. + * @srcp: Source memory pointer. + * @destp: Destination memory pointer. + * @cnt: Number of words required to be copied. + * + * This function is used for copying data between driver memory + * and the SLI memory. This function also changes the endianness + * of each word if native endianness is different from SLI + * endianness. This function can be called with or without + * lock. + **/ void lpfc_sli_pcimem_bcopy(void *srcp, void *destp, uint32_t cnt) { @@ -3518,6 +4245,17 @@ lpfc_sli_pcimem_bcopy(void *srcp, void *destp, uint32_t cnt) } } + +/** + * lpfc_sli_ringpostbuf_put: Function to add a buffer to postbufq. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * @mp: Pointer to driver buffer object. + * + * This function is called with no lock held. + * It always return zero after adding the buffer to the postbufq + * buffer list. + **/ int lpfc_sli_ringpostbuf_put(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, struct lpfc_dmabuf *mp) @@ -3531,6 +4269,18 @@ lpfc_sli_ringpostbuf_put(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, return 0; } +/** + * lpfc_sli_get_buffer_tag: Tag allocation function for a buffer posted + * using CMD_QUE_XRI64_CX iocb. + * @phba: Pointer to HBA context object. + * + * When HBQ is enabled, buffers are searched based on tags. This function + * allocates a tag for buffer posted using CMD_QUE_XRI64_CX iocb. The + * tag is bit wise or-ed with QUE_BUFTAG_BIT to make sure that the tag + * does not conflict with tags of buffer posted for unsolicited events. + * The function returns the allocated tag. The function is called with + * no locks held. + **/ uint32_t lpfc_sli_get_buffer_tag(struct lpfc_hba *phba) { @@ -3545,6 +4295,22 @@ lpfc_sli_get_buffer_tag(struct lpfc_hba *phba) return phba->buffer_tag_count; } +/** + * lpfc_sli_ring_taggedbuf_get: Search HBQ buffer associated with + * posted using CMD_QUE_XRI64_CX iocb. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * @tag: Buffer tag. + * + * Buffers posted using CMD_QUE_XRI64_CX iocb are in pring->postbufq + * list. After HBA DMA data to these buffers, CMD_IOCB_RET_XRI64_CX + * iocb is posted to the response ring with the tag of the buffer. + * This function searches the pring->postbufq list using the tag + * to find buffer associated with CMD_IOCB_RET_XRI64_CX + * iocb. If the buffer is found then lpfc_dmabuf object of the + * buffer is returned to the caller else NULL is returned. + * This function is called with no lock held. + **/ struct lpfc_dmabuf * lpfc_sli_ring_taggedbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, uint32_t tag) @@ -3573,6 +4339,23 @@ lpfc_sli_ring_taggedbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, return NULL; } +/** + * lpfc_sli_ringpostbuf_get: SLI2 buffer search function for + * unsolicited ct and els events. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * @phys: DMA address of the buffer. + * + * This function searches the buffer list using the dma_address + * of unsolicited event to find the driver's lpfc_dmabuf object + * corresponding to the dma_address. The function returns the + * lpfc_dmabuf object if a buffer is found else it returns NULL. + * This function is called by the ct and els unsolicited event + * handlers to get the buffer associated with the unsolicited + * event. + * + * This function is called with no lock held. + **/ struct lpfc_dmabuf * lpfc_sli_ringpostbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, dma_addr_t phys) @@ -3600,6 +4383,17 @@ lpfc_sli_ringpostbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, return NULL; } +/** + * lpfc_sli_abort_els_cmpl: Completion handler for the els abort iocbs. + * @phba: Pointer to HBA context object. + * @cmdiocb: Pointer to driver command iocb object. + * @rspiocb: Pointer to driver response iocb object. + * + * This function is the completion handler for the abort iocbs for + * ELS commands. This function is called from the ELS ring event + * handler with no lock held. This function frees memory resources + * associated with the abort iocb. + **/ static void lpfc_sli_abort_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_iocbq *rspiocb) @@ -3665,6 +4459,17 @@ lpfc_sli_abort_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, return; } +/** + * lpfc_ignore_els_cmpl: Completion handler for aborted ELS command. + * @phba: Pointer to HBA context object. + * @cmdiocb: Pointer to driver command iocb object. + * @rspiocb: Pointer to driver response iocb object. + * + * The function is called from SLI ring event handler with no + * lock held. This function is the completion handler for ELS commands + * which are aborted. The function frees memory resources used for + * the aborted ELS commands. + **/ static void lpfc_ignore_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_iocbq *rspiocb) @@ -3684,6 +4489,17 @@ lpfc_ignore_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, return; } +/** + * lpfc_sli_issue_abort_iotag: Abort function for a command iocb. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * @cmdiocb: Pointer to driver command iocb object. + * + * This function issues an abort iocb for the provided command + * iocb. This function is called with hbalock held. + * The function returns 0 when it fails due to memory allocation + * failure or when the command iocb is an abort request. + **/ int lpfc_sli_issue_abort_iotag(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, struct lpfc_iocbq *cmdiocb) @@ -3757,6 +4573,29 @@ abort_iotag_exit: return retval; } +/** + * lpfc_sli_validate_fcp_iocb: Filtering function, used to find commands + * associated with a vport/SCSI target/lun. + * @iocbq: Pointer to driver iocb object. + * @vport: Pointer to driver virtual port object. + * @tgt_id: SCSI ID of the target. + * @lun_id: LUN ID of the scsi device. + * @ctx_cmd: LPFC_CTX_LUN/LPFC_CTX_TGT/LPFC_CTX_HOST + * + * This function acts as iocb filter for functions which abort or count + * all FCP iocbs pending on a lun/SCSI target/SCSI host. It will return + * 0 if the filtering criteria is met for the given iocb and will return + * 1 if the filtering criteria is not met. + * If ctx_cmd == LPFC_CTX_LUN, the function returns 0 only if the + * given iocb is for the SCSI device specified by vport, tgt_id and + * lun_id parameter. + * If ctx_cmd == LPFC_CTX_TGT, the function returns 0 only if the + * given iocb is for the SCSI target specified by vport and tgt_id + * parameters. + * If ctx_cmd == LPFC_CTX_HOST, the function returns 0 only if the + * given iocb is for the SCSI host associated with the given vport. + * This function is called with no locks held. + **/ static int lpfc_sli_validate_fcp_iocb(struct lpfc_iocbq *iocbq, struct lpfc_vport *vport, uint16_t tgt_id, uint64_t lun_id, @@ -3800,6 +4639,25 @@ lpfc_sli_validate_fcp_iocb(struct lpfc_iocbq *iocbq, struct lpfc_vport *vport, return rc; } +/** + * lpfc_sli_sum_iocb: Function to count the number of FCP iocbs pending. + * @vport: Pointer to virtual port. + * @tgt_id: SCSI ID of the target. + * @lun_id: LUN ID of the scsi device. + * @ctx_cmd: LPFC_CTX_LUN/LPFC_CTX_TGT/LPFC_CTX_HOST. + * + * This function returns number of FCP commands pending for the vport. + * When ctx_cmd == LPFC_CTX_LUN, the function returns number of FCP + * commands pending on the vport associated with SCSI device specified + * by tgt_id and lun_id parameters. + * When ctx_cmd == LPFC_CTX_TGT, the function returns number of FCP + * commands pending on the vport associated with SCSI target specified + * by tgt_id parameter. + * When ctx_cmd == LPFC_CTX_HOST, the function returns number of FCP + * commands pending on the vport. + * This function returns the number of iocbs which satisfy the filter. + * This function is called without any lock held. + **/ int lpfc_sli_sum_iocb(struct lpfc_vport *vport, uint16_t tgt_id, uint64_t lun_id, lpfc_ctx_cmd ctx_cmd) @@ -3819,6 +4677,17 @@ lpfc_sli_sum_iocb(struct lpfc_vport *vport, uint16_t tgt_id, uint64_t lun_id, return sum; } +/** + * lpfc_sli_abort_fcp_cmpl: Completion handler function for an aborted + * FCP iocb. + * @phba: Pointer to HBA context object + * @cmdiocb: Pointer to command iocb object. + * @rspiocb: Pointer to response iocb object. + * + * This function is called when an aborted FCP iocb completes. This + * function is called by the ring event handler with no lock held. + * This function frees the iocb. + **/ void lpfc_sli_abort_fcp_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_iocbq *rspiocb) @@ -3827,6 +4696,28 @@ lpfc_sli_abort_fcp_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, return; } +/** + * lpfc_sli_abort_iocb: This function issue abort for all SCSI commands + * pending on a SCSI host(vport)/target/lun. + * @vport: Pointer to virtual port. + * @pring: Pointer to driver SLI ring object. + * @tgt_id: SCSI ID of the target. + * @lun_id: LUN ID of the scsi device. + * @abort_cmd: LPFC_CTX_LUN/LPFC_CTX_TGT/LPFC_CTX_HOST. + * + * This function sends an abort command for every SCSI command + * associated with the given virtual port pending on the ring + * filtered by lpfc_sli_validate_fcp_iocb function. + * When abort_cmd == LPFC_CTX_LUN, the function sends abort only to the + * FCP iocbs associated with lun specified by tgt_id and lun_id + * parameters + * When abort_cmd == LPFC_CTX_TGT, the function sends abort only to the + * FCP iocbs associated with SCSI target specified by tgt_id parameter. + * When abort_cmd == LPFC_CTX_HOST, the function sends abort to all + * FCP iocbs associated with virtual port. + * This function returns number of iocbs it failed to abort. + * This function is called with no locks held. + **/ int lpfc_sli_abort_iocb(struct lpfc_vport *vport, struct lpfc_sli_ring *pring, uint16_t tgt_id, uint64_t lun_id, lpfc_ctx_cmd abort_cmd) @@ -3878,6 +4769,24 @@ lpfc_sli_abort_iocb(struct lpfc_vport *vport, struct lpfc_sli_ring *pring, return errcnt; } +/** + * lpfc_sli_wake_iocb_wait: iocb completion handler for iocb issued using + * lpfc_sli_issue_iocb_wait. + * @phba: Pointer to HBA context object. + * @cmdiocbq: Pointer to command iocb. + * @rspiocbq: Pointer to response iocb. + * + * This function is the completion handler for iocbs issued using + * lpfc_sli_issue_iocb_wait function. This function is called by the + * ring event handler function without any lock held. This function + * can be called from both worker thread context and interrupt + * context. This function also can be called from other thread which + * cleans up the SLI layer objects. + * This function copy the contents of the response iocb to the + * response iocb memory object provided by the caller of + * lpfc_sli_issue_iocb_wait and then wakes up the thread which + * sleeps for the iocb completion. + **/ static void lpfc_sli_wake_iocb_wait(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocbq, @@ -3899,13 +4808,36 @@ lpfc_sli_wake_iocb_wait(struct lpfc_hba *phba, return; } -/* - * Issue the caller's iocb and wait for its completion, but no longer than the - * caller's timeout. Note that iocb_flags is cleared before the - * lpfc_sli_issue_call since the wake routine sets a unique value and by - * definition this is a wait function. - */ - +/** + * lpfc_sli_issue_iocb_wait: Synchronous function to issue iocb commands. + * @phba: Pointer to HBA context object.. + * @pring: Pointer to sli ring. + * @piocb: Pointer to command iocb. + * @prspiocbq: Pointer to response iocb. + * @timeout: Timeout in number of seconds. + * + * This function issues the iocb to firmware and waits for the + * iocb to complete. If the iocb command is not + * completed within timeout seconds, it returns IOCB_TIMEDOUT. + * Caller should not free the iocb resources if this function + * returns IOCB_TIMEDOUT. + * The function waits for the iocb completion using an + * non-interruptible wait. + * This function will sleep while waiting for iocb completion. + * So, this function should not be called from any context which + * does not allow sleeping. Due to the same reason, this function + * cannot be called with interrupt disabled. + * This function assumes that the iocb completions occur while + * this function sleep. So, this function cannot be called from + * the thread which process iocb completion for this ring. + * This function clears the iocb_flag of the iocb object before + * issuing the iocb and the iocb completion handler sets this + * flag and wakes this thread when the iocb completes. + * The contents of the response iocb will be copied to prspiocbq + * by the completion handler when the command completes. + * This function returns IOCB_SUCCESS when success. + * This function is called with no lock held. + **/ int lpfc_sli_issue_iocb_wait(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, @@ -3983,6 +4915,32 @@ lpfc_sli_issue_iocb_wait(struct lpfc_hba *phba, return retval; } +/** + * lpfc_sli_issue_mbox_wait: Synchronous function to issue mailbox. + * @phba: Pointer to HBA context object. + * @pmboxq: Pointer to driver mailbox object. + * @timeout: Timeout in number of seconds. + * + * This function issues the mailbox to firmware and waits for the + * mailbox command to complete. If the mailbox command is not + * completed within timeout seconds, it returns MBX_TIMEOUT. + * The function waits for the mailbox completion using an + * interruptible wait. If the thread is woken up due to a + * signal, MBX_TIMEOUT error is returned to the caller. Caller + * should not free the mailbox resources, if this function returns + * MBX_TIMEOUT. + * This function will sleep while waiting for mailbox completion. + * So, this function should not be called from any context which + * does not allow sleeping. Due to the same reason, this function + * cannot be called with interrupt disabled. + * This function assumes that the mailbox completion occurs while + * this function sleep. So, this function cannot be called from + * the worker thread which processes mailbox completion. + * This function is called in the context of HBA management + * applications. + * This function returns MBX_SUCCESS when successful. + * This function is called with no lock held. + **/ int lpfc_sli_issue_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq, uint32_t timeout) @@ -4027,6 +4985,18 @@ lpfc_sli_issue_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq, return retval; } +/** + * lpfc_sli_flush_mbox_queue: mailbox queue cleanup function. + * @phba: Pointer to HBA context. + * + * This function is called to cleanup any pending mailbox + * objects in the driver queue before bringing the HBA offline. + * This function is called while resetting the HBA. + * The function is called without any lock held. The function + * takes hbalock to update SLI data structure. + * This function returns 1 when there is an active mailbox + * command pending else returns 0. + **/ int lpfc_sli_flush_mbox_queue(struct lpfc_hba * phba) { @@ -4058,6 +5028,27 @@ lpfc_sli_flush_mbox_queue(struct lpfc_hba * phba) return (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) ? 1 : 0; } +/** + * lpfc_intr_handler: The interrupt handler of lpfc driver. + * @irq: Interrupt number. + * @dev_id: The device context pointer. + * + * This function is called from the PCI layer when there is + * an event in the HBA which requires driver attention. When + * the PCI slot is in error recovery or the HBA is undergoing + * initialization the interrupt handler will not process the + * interrupt. + * The error attention, link attention and els ring attention + * events are handled by the worker thread. The interrupt + * handler signals the worker thread and returns for these + * events. + * The SCSI ring event and mailbox events are handled in the + * interrupt context. + * This function is called without any lock held. It gets the + * hbalock to access and update SLI data structures. + * This function returns IRQ_HANDLED when interrupt is handled + * else it returns IRQ_NONE. + **/ irqreturn_t lpfc_intr_handler(int irq, void *dev_id) { -- cgit v1.2.3 From 90160e010b6f3a91a9bb044bbe6723731e6f366c Mon Sep 17 00:00:00 2001 From: James Smart Date: Sun, 24 Aug 2008 21:49:45 -0400 Subject: [SCSI] lpfc 8.2.8 : Miscellaneous Discovery Fixes Miscellaneous Discovery fixes: - Fix rejection followed by acceptance in handling RPL and RPS unsolicited events - Fix for vport delete crash - Fix PLOGI vs ADISC race condition Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_els.c | 186 +++++++++++++++++++------------------ drivers/scsi/lpfc/lpfc_init.c | 8 -- drivers/scsi/lpfc/lpfc_nportdisc.c | 14 +-- drivers/scsi/lpfc/lpfc_vport.c | 74 +++++++++++++++ 4 files changed, 172 insertions(+), 110 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 43049b9d64c..2e24b4fe2be 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -1555,6 +1555,83 @@ lpfc_issue_els_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, return 0; } +/** + * lpfc_rscn_disc: Perform rscn discovery for a vport. + * @vport: pointer to a host virtual N_Port data structure. + * + * This routine performs Registration State Change Notification (RSCN) + * discovery for a @vport. If the @vport's node port recovery count is not + * zero, it will invoke the lpfc_els_disc_plogi() to perform PLOGI for all + * the nodes that need recovery. If none of the PLOGI were needed through + * the lpfc_els_disc_plogi() routine, the lpfc_end_rscn() routine shall be + * invoked to check and handle possible more RSCN came in during the period + * of processing the current ones. + **/ +static void +lpfc_rscn_disc(struct lpfc_vport *vport) +{ + lpfc_can_disctmo(vport); + + /* RSCN discovery */ + /* go thru NPR nodes and issue ELS PLOGIs */ + if (vport->fc_npr_cnt) + if (lpfc_els_disc_plogi(vport)) + return; + + lpfc_end_rscn(vport); +} + +/** + * lpfc_adisc_done: Complete the adisc phase of discovery. + * @vport: pointer to lpfc_vport hba data structure that finished all ADISCs. + * + * This function is called when the final ADISC is completed during discovery. + * This function handles clearing link attention or issuing reg_vpi depending + * on whether npiv is enabled. This function also kicks off the PLOGI phase of + * discovery. + * This function is called with no locks held. + **/ +static void +lpfc_adisc_done(struct lpfc_vport *vport) +{ + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + struct lpfc_hba *phba = vport->phba; + + /* + * For NPIV, cmpl_reg_vpi will set port_state to READY, + * and continue discovery. + */ + if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) && + !(vport->fc_flag & FC_RSCN_MODE)) { + lpfc_issue_reg_vpi(phba, vport); + return; + } + /* + * For SLI2, we need to set port_state to READY + * and continue discovery. + */ + if (vport->port_state < LPFC_VPORT_READY) { + /* If we get here, there is nothing to ADISC */ + if (vport->port_type == LPFC_PHYSICAL_PORT) + lpfc_issue_clear_la(phba, vport); + if (!(vport->fc_flag & FC_ABORT_DISCOVERY)) { + vport->num_disc_nodes = 0; + /* go thru NPR list, issue ELS PLOGIs */ + if (vport->fc_npr_cnt) + lpfc_els_disc_plogi(vport); + if (!vport->num_disc_nodes) { + spin_lock_irq(shost->host_lock); + vport->fc_flag &= ~FC_NDISC_ACTIVE; + spin_unlock_irq(shost->host_lock); + lpfc_can_disctmo(vport); + lpfc_end_rscn(vport); + } + } + vport->port_state = LPFC_VPORT_READY; + } else + lpfc_rscn_disc(vport); +} + /** * lpfc_more_adisc: Issue more adisc as needed. * @vport: pointer to a host virtual N_Port data structure. @@ -1583,35 +1660,11 @@ lpfc_more_adisc(struct lpfc_vport *vport) /* go thru NPR nodes and issue any remaining ELS ADISCs */ sentadisc = lpfc_els_disc_adisc(vport); } + if (!vport->num_disc_nodes) + lpfc_adisc_done(vport); return; } -/** - * lpfc_rscn_disc: Perform rscn discovery for a vport. - * @vport: pointer to a host virtual N_Port data structure. - * - * This routine performs Registration State Change Notification (RSCN) - * discovery for a @vport. If the @vport's node port recovery count is not - * zero, it will invoke the lpfc_els_disc_plogi() to perform PLOGI for all - * the nodes that need recovery. If none of the PLOGI were needed through - * the lpfc_els_disc_plogi() routine, the lpfc_end_rscn() routine shall be - * invoked to check and handle possible more RSCN came in during the period - * of processing the current ones. - **/ -static void -lpfc_rscn_disc(struct lpfc_vport *vport) -{ - lpfc_can_disctmo(vport); - - /* RSCN discovery */ - /* go thru NPR nodes and issue ELS PLOGIs */ - if (vport->fc_npr_cnt) - if (lpfc_els_disc_plogi(vport)) - return; - - lpfc_end_rscn(vport); -} - /** * lpfc_cmpl_els_adisc: Completion callback function for adisc. * @phba: pointer to lpfc hba data structure. @@ -1692,52 +1745,9 @@ lpfc_cmpl_els_adisc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, lpfc_disc_state_machine(vport, ndlp, cmdiocb, NLP_EVT_CMPL_ADISC); - if (disc && vport->num_disc_nodes) { - /* Check to see if there are more ADISCs to be sent */ + /* Check to see if there are more ADISCs to be sent */ + if (disc && vport->num_disc_nodes) lpfc_more_adisc(vport); - - /* Check to see if we are done with ADISC authentication */ - if (vport->num_disc_nodes == 0) { - /* If we get here, there is nothing left to ADISC */ - /* - * For NPIV, cmpl_reg_vpi will set port_state to READY, - * and continue discovery. - */ - if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) && - !(vport->fc_flag & FC_RSCN_MODE)) { - lpfc_issue_reg_vpi(phba, vport); - goto out; - } - /* - * For SLI2, we need to set port_state to READY - * and continue discovery. - */ - if (vport->port_state < LPFC_VPORT_READY) { - /* If we get here, there is nothing to ADISC */ - if (vport->port_type == LPFC_PHYSICAL_PORT) - lpfc_issue_clear_la(phba, vport); - - if (!(vport->fc_flag & FC_ABORT_DISCOVERY)) { - vport->num_disc_nodes = 0; - /* go thru NPR list, issue ELS PLOGIs */ - if (vport->fc_npr_cnt) - lpfc_els_disc_plogi(vport); - - if (!vport->num_disc_nodes) { - spin_lock_irq(shost->host_lock); - vport->fc_flag &= - ~FC_NDISC_ACTIVE; - spin_unlock_irq( - shost->host_lock); - lpfc_can_disctmo(vport); - } - } - vport->port_state = LPFC_VPORT_READY; - } else { - lpfc_rscn_disc(vport); - } - } - } out: lpfc_els_free_iocb(phba, cmdiocb); return; @@ -2258,19 +2268,16 @@ lpfc_cancel_retry_delay_tmo(struct lpfc_vport *vport, struct lpfc_nodelist *nlp) if (vport->port_state < LPFC_VPORT_READY) { /* Check if there are more ADISCs to be sent */ lpfc_more_adisc(vport); - if ((vport->num_disc_nodes == 0) && - (vport->fc_npr_cnt)) - lpfc_els_disc_plogi(vport); } else { /* Check if there are more PLOGIs to be sent */ lpfc_more_plogi(vport); - } - if (vport->num_disc_nodes == 0) { - spin_lock_irq(shost->host_lock); - vport->fc_flag &= ~FC_NDISC_ACTIVE; - spin_unlock_irq(shost->host_lock); - lpfc_can_disctmo(vport); - lpfc_end_rscn(vport); + if (vport->num_disc_nodes == 0) { + spin_lock_irq(shost->host_lock); + vport->fc_flag &= ~FC_NDISC_ACTIVE; + spin_unlock_irq(shost->host_lock); + lpfc_can_disctmo(vport); + lpfc_end_rscn(vport); + } } } } @@ -4480,14 +4487,9 @@ lpfc_els_rcv_rps(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, struct ls_rjt stat; if ((ndlp->nlp_state != NLP_STE_UNMAPPED_NODE) && - (ndlp->nlp_state != NLP_STE_MAPPED_NODE)) { - stat.un.b.lsRjtRsvd0 = 0; - stat.un.b.lsRjtRsnCode = LSRJT_UNABLE_TPC; - stat.un.b.lsRjtRsnCodeExp = LSEXP_CANT_GIVE_DATA; - stat.un.b.vendorUnique = 0; - lpfc_els_rsp_reject(vport, stat.un.lsRjtError, cmdiocb, ndlp, - NULL); - } + (ndlp->nlp_state != NLP_STE_MAPPED_NODE)) + /* reject the unsolicited RPS request and done with it */ + goto reject_out; pcmd = (struct lpfc_dmabuf *) cmdiocb->context2; lp = (uint32_t *) pcmd->virt; @@ -4520,6 +4522,9 @@ lpfc_els_rcv_rps(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, mempool_free(mbox, phba->mbox_mem_pool); } } + +reject_out: + /* issue rejection response */ stat.un.b.lsRjtRsvd0 = 0; stat.un.b.lsRjtRsnCode = LSRJT_UNABLE_TPC; stat.un.b.lsRjtRsnCodeExp = LSEXP_CANT_GIVE_DATA; @@ -4629,12 +4634,15 @@ lpfc_els_rcv_rpl(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, if ((ndlp->nlp_state != NLP_STE_UNMAPPED_NODE) && (ndlp->nlp_state != NLP_STE_MAPPED_NODE)) { + /* issue rejection response */ stat.un.b.lsRjtRsvd0 = 0; stat.un.b.lsRjtRsnCode = LSRJT_UNABLE_TPC; stat.un.b.lsRjtRsnCodeExp = LSEXP_CANT_GIVE_DATA; stat.un.b.vendorUnique = 0; lpfc_els_rsp_reject(vport, stat.un.lsRjtError, cmdiocb, ndlp, NULL); + /* rejected the unsolicited RPL request and done with it */ + return 0; } pcmd = (struct lpfc_dmabuf *) cmdiocb->context2; diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index b9d553c2ac4..93fd09daca8 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -1580,14 +1580,6 @@ lpfc_cleanup(struct lpfc_vport *vport) lpfc_disc_state_machine(vport, ndlp, NULL, NLP_EVT_DEVICE_RM); - /* nlp_type zero is not defined, nlp_flag zero also not defined, - * nlp_state is unused, this happens when - * an initiator has logged - * into us so cleanup this ndlp. - */ - if ((ndlp->nlp_type == 0) && (ndlp->nlp_flag == 0) && - (ndlp->nlp_state == 0)) - lpfc_nlp_put(ndlp); } /* At this point, ALL ndlp's should be gone diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index 6688a8689b5..705c4ae1bdc 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -1003,20 +1003,8 @@ lpfc_rcv_plogi_adisc_issue(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, spin_lock_irq(shost->host_lock); ndlp->nlp_flag &= ~NLP_NPR_2B_DISC; spin_unlock_irq(shost->host_lock); - - if (vport->num_disc_nodes) { + if (vport->num_disc_nodes) lpfc_more_adisc(vport); - if ((vport->num_disc_nodes == 0) && - (vport->fc_npr_cnt)) - lpfc_els_disc_plogi(vport); - if (vport->num_disc_nodes == 0) { - spin_lock_irq(shost->host_lock); - vport->fc_flag &= ~FC_NDISC_ACTIVE; - spin_unlock_irq(shost->host_lock); - lpfc_can_disctmo(vport); - lpfc_end_rscn(vport); - } - } } return ndlp->nlp_state; } diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c index 109f89d9883..ad0f6531387 100644 --- a/drivers/scsi/lpfc/lpfc_vport.c +++ b/drivers/scsi/lpfc/lpfc_vport.c @@ -204,6 +204,77 @@ lpfc_unique_wwpn(struct lpfc_hba *phba, struct lpfc_vport *new_vport) return 1; } +/** + * lpfc_discovery_wait: Wait for driver discovery to quiesce. + * @vport: The virtual port for which this call is being executed. + * + * This driver calls this routine specifically from lpfc_vport_delete + * to enforce a synchronous execution of vport + * delete relative to discovery activities. The + * lpfc_vport_delete routine should not return until it + * can reasonably guarantee that discovery has quiesced. + * Post FDISC LOGO, the driver must wait until its SAN teardown is + * complete and all resources recovered before allowing + * cleanup. + * + * This routine does not require any locks held. + **/ +static void lpfc_discovery_wait(struct lpfc_vport *vport) +{ + struct lpfc_hba *phba = vport->phba; + uint32_t wait_flags = 0; + unsigned long wait_time_max; + unsigned long start_time; + + wait_flags = FC_RSCN_MODE | FC_RSCN_DISCOVERY | FC_NLP_MORE | + FC_RSCN_DEFERRED | FC_NDISC_ACTIVE | FC_DISC_TMO; + + /* + * The time constraint on this loop is a balance between the + * fabric RA_TOV value and dev_loss tmo. The driver's + * devloss_tmo is 10 giving this loop a 3x multiplier minimally. + */ + wait_time_max = msecs_to_jiffies(((phba->fc_ratov * 3) + 3) * 1000); + wait_time_max += jiffies; + start_time = jiffies; + while (time_before(jiffies, wait_time_max)) { + if ((vport->num_disc_nodes > 0) || + (vport->fc_flag & wait_flags) || + ((vport->port_state > LPFC_VPORT_FAILED) && + (vport->port_state < LPFC_VPORT_READY))) { + lpfc_printf_log(phba, KERN_INFO, LOG_VPORT, + "1833 Vport discovery quiesce Wait:" + " vpi x%x state x%x fc_flags x%x" + " num_nodes x%x, waiting 1000 msecs" + " total wait msecs x%x\n", + vport->vpi, vport->port_state, + vport->fc_flag, vport->num_disc_nodes, + jiffies_to_msecs(jiffies - start_time)); + msleep(1000); + } else { + /* Base case. Wait variants satisfied. Break out */ + lpfc_printf_log(phba, KERN_INFO, LOG_VPORT, + "1834 Vport discovery quiesced:" + " vpi x%x state x%x fc_flags x%x" + " wait msecs x%x\n", + vport->vpi, vport->port_state, + vport->fc_flag, + jiffies_to_msecs(jiffies + - start_time)); + break; + } + } + + if (time_after(jiffies, wait_time_max)) + lpfc_printf_log(phba, KERN_ERR, LOG_VPORT, + "1835 Vport discovery quiesce failed:" + " vpi x%x state x%x fc_flags x%x" + " wait msecs x%x\n", + vport->vpi, vport->port_state, + vport->fc_flag, + jiffies_to_msecs(jiffies - start_time)); +} + int lpfc_vport_create(struct fc_vport *fc_vport, bool disable) { @@ -602,6 +673,9 @@ lpfc_vport_delete(struct fc_vport *fc_vport) timeout = schedule_timeout(timeout); } + if (!(phba->pport->load_flag & FC_UNLOADING)) + lpfc_discovery_wait(vport); + skip_logo: lpfc_cleanup(vport); lpfc_sli_host_down(vport); -- cgit v1.2.3 From 34b02dcdcf1865405f4762b991965c0c3b8a3ae0 Mon Sep 17 00:00:00 2001 From: James Smart Date: Sun, 24 Aug 2008 21:49:55 -0400 Subject: [SCSI] lpfc 8.2.8 : Update driver for new SLI-3 features Update driver for new SLI-3 features: - interrupt enhancements - lose adapter doorbell writes - inlining support for FCP_Ixx cmds Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc.h | 22 ++++-- drivers/scsi/lpfc/lpfc_ct.c | 4 +- drivers/scsi/lpfc/lpfc_debugfs.c | 52 +++---------- drivers/scsi/lpfc/lpfc_els.c | 4 +- drivers/scsi/lpfc/lpfc_hw.h | 63 ++++++++++----- drivers/scsi/lpfc/lpfc_init.c | 28 ++++--- drivers/scsi/lpfc/lpfc_mbox.c | 75 +++++++++--------- drivers/scsi/lpfc/lpfc_scsi.c | 163 ++++++++++++++++++++++++++++----------- drivers/scsi/lpfc/lpfc_sli.c | 122 +++++++++++++++-------------- 9 files changed, 314 insertions(+), 219 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index e0e018d1265..327eeb05108 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -407,10 +407,11 @@ struct lpfc_hba { struct lpfc_sli sli; uint32_t sli_rev; /* SLI2 or SLI3 */ uint32_t sli3_options; /* Mask of enabled SLI3 options */ -#define LPFC_SLI3_ENABLED 0x01 -#define LPFC_SLI3_HBQ_ENABLED 0x02 -#define LPFC_SLI3_NPIV_ENABLED 0x04 -#define LPFC_SLI3_VPORT_TEARDOWN 0x08 +#define LPFC_SLI3_HBQ_ENABLED 0x01 +#define LPFC_SLI3_NPIV_ENABLED 0x02 +#define LPFC_SLI3_VPORT_TEARDOWN 0x04 +#define LPFC_SLI3_CRP_ENABLED 0x08 +#define LPFC_SLI3_INB_ENABLED 0x10 uint32_t iocb_cmd_size; uint32_t iocb_rsp_size; @@ -422,10 +423,16 @@ struct lpfc_hba { #define LS_NPIV_FAB_SUPPORTED 0x2 /* Fabric supports NPIV */ #define LS_IGNORE_ERATT 0x4 /* intr handler should ignore ERATT */ - struct lpfc_sli2_slim *slim2p; - struct lpfc_dmabuf hbqslimp; + struct lpfc_dmabuf slim2p; + + MAILBOX_t *mbox; + uint32_t *inb_ha_copy; + uint32_t *inb_counter; + uint32_t inb_last_counter; + struct _PCB *pcb; + struct _IOCB *IOCBs; - dma_addr_t slim2p_mapping; + struct lpfc_dmabuf hbqslimp; uint16_t pci_cfg_value; @@ -514,6 +521,7 @@ struct lpfc_hba { void __iomem *HCregaddr; /* virtual address for host ctl reg */ struct lpfc_hgp __iomem *host_gp; /* Host side get/put pointers */ + struct lpfc_pgp *port_gp; uint32_t __iomem *hbq_put; /* Address in SLIM to HBQ put ptrs */ uint32_t *hbq_get; /* Host mem address of HBQ get ptrs */ diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c index 7fc74cf5823..0f387862cf7 100644 --- a/drivers/scsi/lpfc/lpfc_ct.c +++ b/drivers/scsi/lpfc/lpfc_ct.c @@ -212,7 +212,7 @@ lpfc_alloc_ct_rsp(struct lpfc_hba *phba, int cmdcode, struct ulp_bde64 *bpl, else list_add_tail(&mp->list, &mlist->list); - bpl->tus.f.bdeFlags = BUFF_USE_RCV; + bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64I; /* build buffer ptr list for IOCB */ bpl->addrLow = le32_to_cpu(putPaddrLow(mp->phys) ); bpl->addrHigh = le32_to_cpu(putPaddrHigh(mp->phys) ); @@ -283,7 +283,7 @@ lpfc_gen_req(struct lpfc_vport *vport, struct lpfc_dmabuf *bmp, icmd->un.genreq64.bdl.ulpIoTag32 = 0; icmd->un.genreq64.bdl.addrHigh = putPaddrHigh(bmp->phys); icmd->un.genreq64.bdl.addrLow = putPaddrLow(bmp->phys); - icmd->un.genreq64.bdl.bdeFlags = BUFF_TYPE_BDL; + icmd->un.genreq64.bdl.bdeFlags = BUFF_TYPE_BLP_64; icmd->un.genreq64.bdl.bdeSize = (num_entry * sizeof (struct ulp_bde64)); if (usr_flg) diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c index 2588eadffbb..2f6d34924b7 100644 --- a/drivers/scsi/lpfc/lpfc_debugfs.c +++ b/drivers/scsi/lpfc/lpfc_debugfs.c @@ -454,7 +454,7 @@ lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size) spin_lock_irq(&phba->hbalock); len += snprintf(buf+len, size-len, "SLIM Mailbox\n"); - ptr = (uint32_t *)phba->slim2p; + ptr = (uint32_t *)phba->slim2p.virt; i = sizeof(MAILBOX_t); while (i > 0) { len += snprintf(buf+len, size-len, @@ -467,7 +467,7 @@ lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size) } len += snprintf(buf+len, size-len, "SLIM PCB\n"); - ptr = (uint32_t *)&phba->slim2p->pcb; + ptr = (uint32_t *)phba->pcb; i = sizeof(PCB_t); while (i > 0) { len += snprintf(buf+len, size-len, @@ -479,44 +479,16 @@ lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size) off += (8 * sizeof(uint32_t)); } - pgpp = (struct lpfc_pgp *)&phba->slim2p->mbx.us.s3_pgp.port; - pring = &psli->ring[0]; - len += snprintf(buf+len, size-len, - "Ring 0: CMD GetInx:%d (Max:%d Next:%d Local:%d flg:x%x) " - "RSP PutInx:%d Max:%d\n", - pgpp->cmdGetInx, pring->numCiocb, - pring->next_cmdidx, pring->local_getidx, pring->flag, - pgpp->rspPutInx, pring->numRiocb); - pgpp++; - - pring = &psli->ring[1]; - len += snprintf(buf+len, size-len, - "Ring 1: CMD GetInx:%d (Max:%d Next:%d Local:%d flg:x%x) " - "RSP PutInx:%d Max:%d\n", - pgpp->cmdGetInx, pring->numCiocb, - pring->next_cmdidx, pring->local_getidx, pring->flag, - pgpp->rspPutInx, pring->numRiocb); - pgpp++; - - pring = &psli->ring[2]; - len += snprintf(buf+len, size-len, - "Ring 2: CMD GetInx:%d (Max:%d Next:%d Local:%d flg:x%x) " - "RSP PutInx:%d Max:%d\n", - pgpp->cmdGetInx, pring->numCiocb, - pring->next_cmdidx, pring->local_getidx, pring->flag, - pgpp->rspPutInx, pring->numRiocb); - pgpp++; - - pring = &psli->ring[3]; - len += snprintf(buf+len, size-len, - "Ring 3: CMD GetInx:%d (Max:%d Next:%d Local:%d flg:x%x) " - "RSP PutInx:%d Max:%d\n", - pgpp->cmdGetInx, pring->numCiocb, - pring->next_cmdidx, pring->local_getidx, pring->flag, - pgpp->rspPutInx, pring->numRiocb); - - - ptr = (uint32_t *)&phba->slim2p->mbx.us.s3_pgp.hbq_get; + for (i = 0; i < 4; i++) { + pgpp = &phba->port_gp[i]; + pring = &psli->ring[i]; + len += snprintf(buf+len, size-len, + "Ring %d: CMD GetInx:%d (Max:%d Next:%d " + "Local:%d flg:x%x) RSP PutInx:%d Max:%d\n", + i, pgpp->cmdGetInx, pring->numCiocb, + pring->next_cmdidx, pring->local_getidx, + pring->flag, pgpp->rspPutInx, pring->numRiocb); + } word0 = readl(phba->HAregaddr); word1 = readl(phba->CAregaddr); word2 = readl(phba->HSregaddr); diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 2e24b4fe2be..89bd9ab46de 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -200,7 +200,7 @@ lpfc_prep_els_iocb(struct lpfc_vport *vport, uint8_t expectRsp, icmd->un.elsreq64.bdl.addrHigh = putPaddrHigh(pbuflist->phys); icmd->un.elsreq64.bdl.addrLow = putPaddrLow(pbuflist->phys); - icmd->un.elsreq64.bdl.bdeFlags = BUFF_TYPE_BDL; + icmd->un.elsreq64.bdl.bdeFlags = BUFF_TYPE_BLP_64; icmd->un.elsreq64.remoteID = did; /* DID */ if (expectRsp) { icmd->un.elsreq64.bdl.bdeSize = (2 * sizeof(struct ulp_bde64)); @@ -235,7 +235,7 @@ lpfc_prep_els_iocb(struct lpfc_vport *vport, uint8_t expectRsp, bpl->addrLow = le32_to_cpu(putPaddrLow(prsp->phys)); bpl->addrHigh = le32_to_cpu(putPaddrHigh(prsp->phys)); bpl->tus.f.bdeSize = FCELSSIZE; - bpl->tus.f.bdeFlags = BUFF_USE_RCV; + bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64; bpl->tus.w = le32_to_cpu(bpl->tus.w); } diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h index 7773b949aa7..a986332fecf 100644 --- a/drivers/scsi/lpfc/lpfc_hw.h +++ b/drivers/scsi/lpfc/lpfc_hw.h @@ -1474,24 +1474,18 @@ struct ulp_bde64 { /* SLI-2 */ uint32_t bdeFlags:8; /* BDE Flags 0 IS A SUPPORTED VALUE !! */ #endif - -#define BUFF_USE_RSVD 0x01 /* bdeFlags */ -#define BUFF_USE_INTRPT 0x02 /* Not Implemented with LP6000 */ -#define BUFF_USE_CMND 0x04 /* Optional, 1=cmd/rsp 0=data buffer */ -#define BUFF_USE_RCV 0x08 /* "" "", 1=rcv buffer, 0=xmit - buffer */ -#define BUFF_TYPE_32BIT 0x10 /* "" "", 1=32 bit addr 0=64 bit - addr */ -#define BUFF_TYPE_SPECIAL 0x20 /* Not Implemented with LP6000 */ -#define BUFF_TYPE_BDL 0x40 /* Optional, may be set in BDL */ -#define BUFF_TYPE_INVALID 0x80 /* "" "" */ +#define BUFF_TYPE_BDE_64 0x00 /* BDE (Host_resident) */ +#define BUFF_TYPE_BDE_IMMED 0x01 /* Immediate Data BDE */ +#define BUFF_TYPE_BDE_64P 0x02 /* BDE (Port-resident) */ +#define BUFF_TYPE_BDE_64I 0x08 /* Input BDE (Host-resident) */ +#define BUFF_TYPE_BDE_64IP 0x0A /* Input BDE (Port-resident) */ +#define BUFF_TYPE_BLP_64 0x40 /* BLP (Host-resident) */ +#define BUFF_TYPE_BLP_64P 0x42 /* BLP (Port-resident) */ } f; } tus; uint32_t addrLow; uint32_t addrHigh; }; -#define BDE64_SIZE_WORD 0 -#define BPL64_SIZE_WORD 0x40 typedef struct ULP_BDL { /* SLI-2 */ #ifdef __BIG_ENDIAN_BITFIELD @@ -2715,11 +2709,19 @@ struct sli3_pgp { uint32_t hbq_get[16]; }; -typedef union { - struct sli2_desc s2; - struct sli3_desc s3; - struct sli3_pgp s3_pgp; -} SLI_VAR; +struct sli3_inb_pgp { + uint32_t ha_copy; + uint32_t counter; + struct lpfc_pgp port[MAX_RINGS]; + uint32_t hbq_get[16]; +}; + +union sli_var { + struct sli2_desc s2; + struct sli3_desc s3; + struct sli3_pgp s3_pgp; + struct sli3_inb_pgp s3_inb_pgp; +}; typedef struct { #ifdef __BIG_ENDIAN_BITFIELD @@ -2737,7 +2739,7 @@ typedef struct { #endif MAILVARIANTS un; - SLI_VAR us; + union sli_var us; } MAILBOX_t; /* @@ -3105,6 +3107,27 @@ struct que_xri64cx_ext_fields { struct lpfc_hbq_entry buff[5]; }; +#define LPFC_EXT_DATA_BDE_COUNT 3 +struct fcp_irw_ext { + uint32_t io_tag64_low; + uint32_t io_tag64_high; +#ifdef __BIG_ENDIAN_BITFIELD + uint8_t reserved1; + uint8_t reserved2; + uint8_t reserved3; + uint8_t ebde_count; +#else /* __LITTLE_ENDIAN */ + uint8_t ebde_count; + uint8_t reserved3; + uint8_t reserved2; + uint8_t reserved1; +#endif + uint32_t reserved4; + struct ulp_bde64 rbde; /* response bde */ + struct ulp_bde64 dbde[LPFC_EXT_DATA_BDE_COUNT]; /* data BDE or BPL */ + uint8_t icd[32]; /* immediate command data (32 bytes) */ +}; + typedef struct _IOCB { /* IOCB structure */ union { GENERIC_RSP grsp; /* Generic response */ @@ -3190,7 +3213,7 @@ typedef struct _IOCB { /* IOCB structure */ /* words 8-31 used for que_xri_cx iocb */ struct que_xri64cx_ext_fields que_xri64cx_ext_words; - + struct fcp_irw_ext fcp_ext; uint32_t sli3Words[24]; /* 96 extra bytes for SLI-3 */ } unsli3; diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 93fd09daca8..6a7a039e890 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -2312,12 +2312,18 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) } /* Allocate memory for SLI-2 structures */ - phba->slim2p = dma_alloc_coherent(&phba->pcidev->dev, SLI2_SLIM_SIZE, - &phba->slim2p_mapping, GFP_KERNEL); - if (!phba->slim2p) + phba->slim2p.virt = dma_alloc_coherent(&phba->pcidev->dev, + SLI2_SLIM_SIZE, + &phba->slim2p.phys, + GFP_KERNEL); + if (!phba->slim2p.virt) goto out_iounmap; - memset(phba->slim2p, 0, SLI2_SLIM_SIZE); + memset(phba->slim2p.virt, 0, SLI2_SLIM_SIZE); + phba->mbox = phba->slim2p.virt; + phba->pcb = (phba->slim2p.virt + sizeof(MAILBOX_t)); + phba->IOCBs = (phba->slim2p.virt + sizeof(MAILBOX_t) + + sizeof(struct _PCB)); phba->hbqslimp.virt = dma_alloc_coherent(&phba->pcidev->dev, lpfc_sli_hbq_size(), @@ -2513,11 +2519,11 @@ out_free_iocbq: } lpfc_mem_free(phba); out_free_hbqslimp: - dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(), phba->hbqslimp.virt, - phba->hbqslimp.phys); + dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(), + phba->hbqslimp.virt, phba->hbqslimp.phys); out_free_slim: - dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE, phba->slim2p, - phba->slim2p_mapping); + dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE, + phba->slim2p.virt, phba->slim2p.phys); out_iounmap: iounmap(phba->ctrl_regs_memmap_p); out_iounmap_slim: @@ -2599,12 +2605,12 @@ lpfc_pci_remove_one(struct pci_dev *pdev) lpfc_scsi_free(phba); lpfc_mem_free(phba); - dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(), phba->hbqslimp.virt, - phba->hbqslimp.phys); + dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(), + phba->hbqslimp.virt, phba->hbqslimp.phys); /* Free resources associated with SLI2 interface */ dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE, - phba->slim2p, phba->slim2p_mapping); + phba->slim2p.virt, phba->slim2p.phys); /* unmap adapter SLIM and Control Registers */ iounmap(phba->ctrl_regs_memmap_p); diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c index 7413bfdf89a..ca358355ec9 100644 --- a/drivers/scsi/lpfc/lpfc_mbox.c +++ b/drivers/scsi/lpfc/lpfc_mbox.c @@ -671,7 +671,7 @@ lpfc_config_pcb_setup(struct lpfc_hba * phba) { struct lpfc_sli *psli = &phba->sli; struct lpfc_sli_ring *pring; - PCB_t *pcbp = &phba->slim2p->pcb; + PCB_t *pcbp = phba->pcb; dma_addr_t pdma_addr; uint32_t offset; uint32_t iocbCnt = 0; @@ -700,23 +700,23 @@ lpfc_config_pcb_setup(struct lpfc_hba * phba) continue; } /* Command ring setup for ring */ - pring->cmdringaddr = (void *) &phba->slim2p->IOCBs[iocbCnt]; + pring->cmdringaddr = (void *)&phba->IOCBs[iocbCnt]; pcbp->rdsc[i].cmdEntries = pring->numCiocb; - offset = (uint8_t *) &phba->slim2p->IOCBs[iocbCnt] - - (uint8_t *) phba->slim2p; - pdma_addr = phba->slim2p_mapping + offset; + offset = (uint8_t *) &phba->IOCBs[iocbCnt] - + (uint8_t *) phba->slim2p.virt; + pdma_addr = phba->slim2p.phys + offset; pcbp->rdsc[i].cmdAddrHigh = putPaddrHigh(pdma_addr); pcbp->rdsc[i].cmdAddrLow = putPaddrLow(pdma_addr); iocbCnt += pring->numCiocb; /* Response ring setup for ring */ - pring->rspringaddr = (void *) &phba->slim2p->IOCBs[iocbCnt]; + pring->rspringaddr = (void *) &phba->IOCBs[iocbCnt]; pcbp->rdsc[i].rspEntries = pring->numRiocb; - offset = (uint8_t *)&phba->slim2p->IOCBs[iocbCnt] - - (uint8_t *)phba->slim2p; - pdma_addr = phba->slim2p_mapping + offset; + offset = (uint8_t *)&phba->IOCBs[iocbCnt] - + (uint8_t *)phba->slim2p.virt; + pdma_addr = phba->slim2p.phys + offset; pcbp->rdsc[i].rspAddrHigh = putPaddrHigh(pdma_addr); pcbp->rdsc[i].rspAddrLow = putPaddrLow(pdma_addr); iocbCnt += pring->numRiocb; @@ -977,8 +977,8 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) mb->un.varCfgPort.pcbLen = sizeof(PCB_t); - offset = (uint8_t *)&phba->slim2p->pcb - (uint8_t *)phba->slim2p; - pdma_addr = phba->slim2p_mapping + offset; + offset = (uint8_t *)phba->pcb - (uint8_t *)phba->slim2p.virt; + pdma_addr = phba->slim2p.phys + offset; mb->un.varCfgPort.pcbLow = putPaddrLow(pdma_addr); mb->un.varCfgPort.pcbHigh = putPaddrHigh(pdma_addr); @@ -986,12 +986,13 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) if (phba->sli_rev == 3 && phba->vpd.sli3Feat.cerbm) { mb->un.varCfgPort.cerbm = 1; /* Request HBQs */ + mb->un.varCfgPort.ccrp = 1; /* Command Ring Polling */ + mb->un.varCfgPort.cinb = 1; /* Interrupt Notification Block */ mb->un.varCfgPort.max_hbq = lpfc_sli_hbq_count(); if (phba->max_vpi && phba->cfg_enable_npiv && phba->vpd.sli3Feat.cmv) { mb->un.varCfgPort.max_vpi = phba->max_vpi; mb->un.varCfgPort.cmv = 1; - phba->sli3_options |= LPFC_SLI3_NPIV_ENABLED; } else mb->un.varCfgPort.max_vpi = phba->max_vpi = 0; } else @@ -999,16 +1000,15 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) mb->un.varCfgPort.sli_mode = phba->sli_rev; /* Now setup pcb */ - phba->slim2p->pcb.type = TYPE_NATIVE_SLI2; - phba->slim2p->pcb.feature = FEATURE_INITIAL_SLI2; + phba->pcb->type = TYPE_NATIVE_SLI2; + phba->pcb->feature = FEATURE_INITIAL_SLI2; /* Setup Mailbox pointers */ - phba->slim2p->pcb.mailBoxSize = offsetof(MAILBOX_t, us) + - sizeof(struct sli2_desc); - offset = (uint8_t *)&phba->slim2p->mbx - (uint8_t *)phba->slim2p; - pdma_addr = phba->slim2p_mapping + offset; - phba->slim2p->pcb.mbAddrHigh = putPaddrHigh(pdma_addr); - phba->slim2p->pcb.mbAddrLow = putPaddrLow(pdma_addr); + phba->pcb->mailBoxSize = sizeof(MAILBOX_t); + offset = (uint8_t *)phba->mbox - (uint8_t *)phba->slim2p.virt; + pdma_addr = phba->slim2p.phys + offset; + phba->pcb->mbAddrHigh = putPaddrHigh(pdma_addr); + phba->pcb->mbAddrLow = putPaddrLow(pdma_addr); /* * Setup Host Group ring pointer. @@ -1069,13 +1069,13 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) } /* mask off BAR0's flag bits 0 - 3 */ - phba->slim2p->pcb.hgpAddrLow = (bar_low & PCI_BASE_ADDRESS_MEM_MASK) + - (void __iomem *) phba->host_gp - + phba->pcb->hgpAddrLow = (bar_low & PCI_BASE_ADDRESS_MEM_MASK) + + (void __iomem *)phba->host_gp - (void __iomem *)phba->MBslimaddr; if (bar_low & PCI_BASE_ADDRESS_MEM_TYPE_64) - phba->slim2p->pcb.hgpAddrHigh = bar_high; + phba->pcb->hgpAddrHigh = bar_high; else - phba->slim2p->pcb.hgpAddrHigh = 0; + phba->pcb->hgpAddrHigh = 0; /* write HGP data to SLIM at the required longword offset */ memset(&hgp, 0, sizeof(struct lpfc_hgp)); @@ -1085,17 +1085,19 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) } /* Setup Port Group ring pointer */ - if (phba->sli_rev == 3) - pgp_offset = (uint8_t *)&phba->slim2p->mbx.us.s3_pgp.port - - (uint8_t *)phba->slim2p; - else - pgp_offset = (uint8_t *)&phba->slim2p->mbx.us.s2.port - - (uint8_t *)phba->slim2p; - - pdma_addr = phba->slim2p_mapping + pgp_offset; - phba->slim2p->pcb.pgpAddrHigh = putPaddrHigh(pdma_addr); - phba->slim2p->pcb.pgpAddrLow = putPaddrLow(pdma_addr); - phba->hbq_get = &phba->slim2p->mbx.us.s3_pgp.hbq_get[0]; + if (phba->sli3_options & LPFC_SLI3_INB_ENABLED) { + pgp_offset = offsetof(struct lpfc_sli2_slim, + mbx.us.s3_inb_pgp.port); + phba->hbq_get = phba->mbox->us.s3_inb_pgp.hbq_get; + } else if (phba->sli_rev == 3) { + pgp_offset = offsetof(struct lpfc_sli2_slim, + mbx.us.s3_pgp.port); + phba->hbq_get = phba->mbox->us.s3_pgp.hbq_get; + } else + pgp_offset = offsetof(struct lpfc_sli2_slim, mbx.us.s2.port); + pdma_addr = phba->slim2p.phys + pgp_offset; + phba->pcb->pgpAddrHigh = putPaddrHigh(pdma_addr); + phba->pcb->pgpAddrLow = putPaddrLow(pdma_addr); /* Use callback routine to setp rings in the pcb */ lpfc_config_pcb_setup(phba); @@ -1110,8 +1112,7 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) } /* Swap PCB if needed */ - lpfc_sli_pcimem_bcopy(&phba->slim2p->pcb, &phba->slim2p->pcb, - sizeof(PCB_t)); + lpfc_sli_pcimem_bcopy(phba->pcb, phba->pcb, sizeof(PCB_t)); } /** diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index a22bdf9548a..c1bb90cf0d0 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -198,7 +198,9 @@ lpfc_new_scsi_buf(struct lpfc_vport *vport) struct lpfc_scsi_buf *psb; struct ulp_bde64 *bpl; IOCB_t *iocb; - dma_addr_t pdma_phys; + dma_addr_t pdma_phys_fcp_cmd; + dma_addr_t pdma_phys_fcp_rsp; + dma_addr_t pdma_phys_bpl; uint16_t iotag; psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL); @@ -238,40 +240,60 @@ lpfc_new_scsi_buf(struct lpfc_vport *vport) /* Initialize local short-hand pointers. */ bpl = psb->fcp_bpl; - pdma_phys = psb->dma_handle; + pdma_phys_fcp_cmd = psb->dma_handle; + pdma_phys_fcp_rsp = psb->dma_handle + sizeof(struct fcp_cmnd); + pdma_phys_bpl = psb->dma_handle + sizeof(struct fcp_cmnd) + + sizeof(struct fcp_rsp); /* * The first two bdes are the FCP_CMD and FCP_RSP. The balance are sg * list bdes. Initialize the first two and leave the rest for * queuecommand. */ - bpl->addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys)); - bpl->addrLow = le32_to_cpu(putPaddrLow(pdma_phys)); - bpl->tus.f.bdeSize = sizeof (struct fcp_cmnd); - bpl->tus.f.bdeFlags = BUFF_USE_CMND; - bpl->tus.w = le32_to_cpu(bpl->tus.w); - bpl++; + bpl[0].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_cmd)); + bpl[0].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_cmd)); + bpl[0].tus.f.bdeSize = sizeof(struct fcp_cmnd); + bpl[0].tus.f.bdeFlags = BUFF_TYPE_BDE_64; + bpl[0].tus.w = le32_to_cpu(bpl->tus.w); /* Setup the physical region for the FCP RSP */ - pdma_phys += sizeof (struct fcp_cmnd); - bpl->addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys)); - bpl->addrLow = le32_to_cpu(putPaddrLow(pdma_phys)); - bpl->tus.f.bdeSize = sizeof (struct fcp_rsp); - bpl->tus.f.bdeFlags = (BUFF_USE_CMND | BUFF_USE_RCV); - bpl->tus.w = le32_to_cpu(bpl->tus.w); + bpl[1].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_rsp)); + bpl[1].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_rsp)); + bpl[1].tus.f.bdeSize = sizeof(struct fcp_rsp); + bpl[1].tus.f.bdeFlags = BUFF_TYPE_BDE_64; + bpl[1].tus.w = le32_to_cpu(bpl->tus.w); /* * Since the IOCB for the FCP I/O is built into this lpfc_scsi_buf, * initialize it with all known data now. */ - pdma_phys += (sizeof (struct fcp_rsp)); iocb = &psb->cur_iocbq.iocb; iocb->un.fcpi64.bdl.ulpIoTag32 = 0; - iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys); - iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys); - iocb->un.fcpi64.bdl.bdeSize = (2 * sizeof (struct ulp_bde64)); - iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDL; - iocb->ulpBdeCount = 1; + if (phba->sli_rev == 3) { + /* fill in immediate fcp command BDE */ + iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_IMMED; + iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd); + iocb->un.fcpi64.bdl.addrLow = offsetof(IOCB_t, + unsli3.fcp_ext.icd); + iocb->un.fcpi64.bdl.addrHigh = 0; + iocb->ulpBdeCount = 0; + iocb->ulpLe = 0; + /* fill in responce BDE */ + iocb->unsli3.fcp_ext.rbde.tus.f.bdeFlags = BUFF_TYPE_BDE_64; + iocb->unsli3.fcp_ext.rbde.tus.f.bdeSize = + sizeof(struct fcp_rsp); + iocb->unsli3.fcp_ext.rbde.addrLow = + putPaddrLow(pdma_phys_fcp_rsp); + iocb->unsli3.fcp_ext.rbde.addrHigh = + putPaddrHigh(pdma_phys_fcp_rsp); + } else { + iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BLP_64; + iocb->un.fcpi64.bdl.bdeSize = (2 * sizeof(struct ulp_bde64)); + iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys_bpl); + iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys_bpl); + iocb->ulpBdeCount = 1; + iocb->ulpLe = 1; + } iocb->ulpClass = CLASS3; return psb; @@ -313,8 +335,9 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd; struct ulp_bde64 *bpl = lpfc_cmd->fcp_bpl; IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb; + struct ulp_bde64 *data_bde = iocb_cmd->unsli3.fcp_ext.dbde; dma_addr_t physaddr; - uint32_t i, num_bde = 0; + uint32_t num_bde = 0; int nseg, datadir = scsi_cmnd->sc_data_direction; /* @@ -352,33 +375,64 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) * during probe that limits the number of sg elements in any * single scsi command. Just run through the seg_cnt and format * the bde's. + * When using SLI-3 the driver will try to fit all the BDEs into + * the IOCB. If it can't then the BDEs get added to a BPL as it + * does for SLI-2 mode. */ - scsi_for_each_sg(scsi_cmnd, sgel, nseg, i) { + scsi_for_each_sg(scsi_cmnd, sgel, nseg, num_bde) { physaddr = sg_dma_address(sgel); - bpl->addrLow = le32_to_cpu(putPaddrLow(physaddr)); - bpl->addrHigh = le32_to_cpu(putPaddrHigh(physaddr)); - bpl->tus.f.bdeSize = sg_dma_len(sgel); - if (datadir == DMA_TO_DEVICE) - bpl->tus.f.bdeFlags = 0; - else - bpl->tus.f.bdeFlags = BUFF_USE_RCV; - bpl->tus.w = le32_to_cpu(bpl->tus.w); - bpl++; - num_bde++; + if (phba->sli_rev == 3 && + nseg <= LPFC_EXT_DATA_BDE_COUNT) { + data_bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64; + data_bde->tus.f.bdeSize = sg_dma_len(sgel); + data_bde->addrLow = putPaddrLow(physaddr); + data_bde->addrHigh = putPaddrHigh(physaddr); + data_bde++; + } else { + bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64; + bpl->tus.f.bdeSize = sg_dma_len(sgel); + bpl->tus.w = le32_to_cpu(bpl->tus.w); + bpl->addrLow = + le32_to_cpu(putPaddrLow(physaddr)); + bpl->addrHigh = + le32_to_cpu(putPaddrHigh(physaddr)); + bpl++; + } } } /* * Finish initializing those IOCB fields that are dependent on the - * scsi_cmnd request_buffer. Note that the bdeSize is explicitly - * reinitialized since all iocb memory resources are used many times - * for transmit, receive, and continuation bpl's. + * scsi_cmnd request_buffer. Note that for SLI-2 the bdeSize is + * explicitly reinitialized and for SLI-3 the extended bde count is + * explicitly reinitialized since all iocb memory resources are reused. */ - iocb_cmd->un.fcpi64.bdl.bdeSize = (2 * sizeof (struct ulp_bde64)); - iocb_cmd->un.fcpi64.bdl.bdeSize += - (num_bde * sizeof (struct ulp_bde64)); - iocb_cmd->ulpBdeCount = 1; - iocb_cmd->ulpLe = 1; + if (phba->sli_rev == 3) { + if (num_bde > LPFC_EXT_DATA_BDE_COUNT) { + /* + * The extended IOCB format can only fit 3 BDE or a BPL. + * This I/O has more than 3 BDE so the 1st data bde will + * be a BPL that is filled in here. + */ + physaddr = lpfc_cmd->dma_handle; + data_bde->tus.f.bdeFlags = BUFF_TYPE_BLP_64; + data_bde->tus.f.bdeSize = (num_bde * + sizeof(struct ulp_bde64)); + physaddr += (sizeof(struct fcp_cmnd) + + sizeof(struct fcp_rsp) + + (2 * sizeof(struct ulp_bde64))); + data_bde->addrHigh = putPaddrHigh(physaddr); + data_bde->addrLow = putPaddrLow(physaddr); + /* ebde count includes the responce bde and data bpl */ + iocb_cmd->unsli3.fcp_ext.ebde_count = 2; + } else { + /* ebde count includes the responce bde and data bdes */ + iocb_cmd->unsli3.fcp_ext.ebde_count = (num_bde + 1); + } + } else { + iocb_cmd->un.fcpi64.bdl.bdeSize = + ((num_bde + 2) * sizeof(struct ulp_bde64)); + } fcp_cmnd->fcpDl = cpu_to_be32(scsi_bufflen(scsi_cmnd)); return 0; } @@ -692,6 +746,24 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, lpfc_release_scsi_buf(phba, lpfc_cmd); } +/** + * lpfc_fcpcmd_to_iocb - copy the fcp_cmd data into the IOCB. + * @data: A pointer to the immediate command data portion of the IOCB. + * @fcp_cmnd: The FCP Command that is provided by the SCSI layer. + * + * The routine copies the entire FCP command from @fcp_cmnd to @data while + * byte swapping the data to big endian format for transmission on the wire. + **/ +static void +lpfc_fcpcmd_to_iocb(uint8_t *data, struct fcp_cmnd *fcp_cmnd) +{ + int i, j; + for (i = 0, j = 0; i < sizeof(struct fcp_cmnd); + i += sizeof(uint32_t), j++) { + ((uint32_t *)data)[j] = cpu_to_be32(((uint32_t *)fcp_cmnd)[j]); + } +} + static void lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_nodelist *pnode) @@ -758,7 +830,8 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, fcp_cmnd->fcpCntl3 = 0; phba->fc4ControlRequests++; } - + if (phba->sli_rev == 3) + lpfc_fcpcmd_to_iocb(iocb_cmd->unsli3.fcp_ext.icd, fcp_cmnd); /* * Finish initializing those IOCB fields that are independent * of the scsi_cmnd request_buffer @@ -798,11 +871,13 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport, piocb = &piocbq->iocb; fcp_cmnd = lpfc_cmd->fcp_cmnd; - int_to_scsilun(lun, &lpfc_cmd->fcp_cmnd->fcp_lun); + /* Clear out any old data in the FCP command area */ + memset(fcp_cmnd, 0, sizeof(struct fcp_cmnd)); + int_to_scsilun(lun, &fcp_cmnd->fcp_lun); fcp_cmnd->fcpCntl2 = task_mgmt_cmd; - + if (vport->phba->sli_rev == 3) + lpfc_fcpcmd_to_iocb(piocb->unsli3.fcp_ext.icd, fcp_cmnd); piocb->ulpCommand = CMD_FCP_ICMND64_CR; - piocb->ulpContext = ndlp->nlp_rpi; if (ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE) { piocb->ulpFCP2Rcvy = 1; diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 3cf488496d8..77afa2ba6a2 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -406,11 +406,8 @@ lpfc_sli_ringtx_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) static IOCB_t * lpfc_sli_next_iocb_slot (struct lpfc_hba *phba, struct lpfc_sli_ring *pring) { - struct lpfc_pgp *pgp = (phba->sli_rev == 3) ? - &phba->slim2p->mbx.us.s3_pgp.port[pring->ringno] : - &phba->slim2p->mbx.us.s2.port[pring->ringno]; + struct lpfc_pgp *pgp = &phba->port_gp[pring->ringno]; uint32_t max_cmd_idx = pring->numCiocb; - if ((pring->next_cmdidx == pring->cmdidx) && (++pring->next_cmdidx >= max_cmd_idx)) pring->next_cmdidx = 0; @@ -625,9 +622,11 @@ lpfc_sli_update_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) /* * Tell the HBA that there is work to do in this ring. */ - wmb(); - writel(CA_R0ATT << (ringno * 4), phba->CAregaddr); - readl(phba->CAregaddr); /* flush */ + if (!(phba->sli3_options & LPFC_SLI3_CRP_ENABLED)) { + wmb(); + writel(CA_R0ATT << (ringno * 4), phba->CAregaddr); + readl(phba->CAregaddr); /* flush */ + } } /** @@ -1654,9 +1653,7 @@ lpfc_sli_process_sol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, static void lpfc_sli_rsp_pointers_error(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) { - struct lpfc_pgp *pgp = (phba->sli_rev == 3) ? - &phba->slim2p->mbx.us.s3_pgp.port[pring->ringno] : - &phba->slim2p->mbx.us.s2.port[pring->ringno]; + struct lpfc_pgp *pgp = &phba->port_gp[pring->ringno]; /* * Ring handler: portRspPut is bigger then * rsp ring @@ -1704,7 +1701,7 @@ void lpfc_sli_poll_fcp_ring(struct lpfc_hba *phba) IOCB_t *entry = NULL; struct lpfc_iocbq *cmdiocbq = NULL; struct lpfc_iocbq rspiocbq; - struct lpfc_pgp *pgp; + struct lpfc_pgp *pgp = &phba->port_gp[pring->ringno]; uint32_t status; uint32_t portRspPut, portRspMax; int type; @@ -1714,11 +1711,6 @@ void lpfc_sli_poll_fcp_ring(struct lpfc_hba *phba) pring->stats.iocb_event++; - pgp = (phba->sli_rev == 3) ? - &phba->slim2p->mbx.us.s3_pgp.port[pring->ringno] : - &phba->slim2p->mbx.us.s2.port[pring->ringno]; - - /* * The next available response entry should never exceed the maximum * entries. If it does, treat it as an adapter hardware error. @@ -1870,9 +1862,7 @@ static int lpfc_sli_handle_fast_ring_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, uint32_t mask) { - struct lpfc_pgp *pgp = (phba->sli_rev == 3) ? - &phba->slim2p->mbx.us.s3_pgp.port[pring->ringno] : - &phba->slim2p->mbx.us.s2.port[pring->ringno]; + struct lpfc_pgp *pgp = &phba->port_gp[pring->ringno]; IOCB_t *irsp = NULL; IOCB_t *entry = NULL; struct lpfc_iocbq *cmdiocbq = NULL; @@ -2064,9 +2054,7 @@ int lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, uint32_t mask) { - struct lpfc_pgp *pgp = (phba->sli_rev == 3) ? - &phba->slim2p->mbx.us.s3_pgp.port[pring->ringno] : - &phba->slim2p->mbx.us.s2.port[pring->ringno]; + struct lpfc_pgp *pgp; IOCB_t *entry; IOCB_t *irsp = NULL; struct lpfc_iocbq *rspiocbp = NULL; @@ -2080,6 +2068,7 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba, int rc = 1; unsigned long iflag; + pgp = &phba->port_gp[pring->ringno]; spin_lock_irqsave(&phba->hbalock, iflag); pring->stats.iocb_event++; @@ -2990,13 +2979,15 @@ lpfc_do_config_port(struct lpfc_hba *phba, int sli_mode) if (rc == -ERESTART) { phba->link_state = LPFC_LINK_UNKNOWN; continue; - } else if (rc) { + } else if (rc) break; - } - phba->link_state = LPFC_INIT_MBX_CMDS; lpfc_config_port(phba, pmb); rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL); + phba->sli3_options &= ~(LPFC_SLI3_NPIV_ENABLED | + LPFC_SLI3_HBQ_ENABLED | + LPFC_SLI3_CRP_ENABLED | + LPFC_SLI3_INB_ENABLED); if (rc != MBX_SUCCESS) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0442 Adapter failed to init, mbxCmd x%x " @@ -3006,25 +2997,44 @@ lpfc_do_config_port(struct lpfc_hba *phba, int sli_mode) phba->sli.sli_flag &= ~LPFC_SLI2_ACTIVE; spin_unlock_irq(&phba->hbalock); rc = -ENXIO; - } else { + } else done = 1; - phba->max_vpi = (phba->max_vpi && - pmb->mb.un.varCfgPort.gmv) != 0 - ? pmb->mb.un.varCfgPort.max_vpi - : 0; - } } - if (!done) { rc = -EINVAL; goto do_prep_failed; } - - if ((pmb->mb.un.varCfgPort.sli_mode == 3) && - (!pmb->mb.un.varCfgPort.cMA)) { - rc = -ENXIO; + if (pmb->mb.un.varCfgPort.sli_mode == 3) { + if (!pmb->mb.un.varCfgPort.cMA) { + rc = -ENXIO; + goto do_prep_failed; + } + if (phba->max_vpi && pmb->mb.un.varCfgPort.gmv) { + phba->sli3_options |= LPFC_SLI3_NPIV_ENABLED; + phba->max_vpi = pmb->mb.un.varCfgPort.max_vpi; + } else + phba->max_vpi = 0; + if (pmb->mb.un.varCfgPort.gerbm) + phba->sli3_options |= LPFC_SLI3_HBQ_ENABLED; + if (pmb->mb.un.varCfgPort.gcrp) + phba->sli3_options |= LPFC_SLI3_CRP_ENABLED; + if (pmb->mb.un.varCfgPort.ginb) { + phba->sli3_options |= LPFC_SLI3_INB_ENABLED; + phba->port_gp = phba->mbox->us.s3_inb_pgp.port; + phba->inb_ha_copy = &phba->mbox->us.s3_inb_pgp.ha_copy; + phba->inb_counter = &phba->mbox->us.s3_inb_pgp.counter; + phba->inb_last_counter = + phba->mbox->us.s3_inb_pgp.counter; + } else { + phba->port_gp = phba->mbox->us.s3_pgp.port; + phba->inb_ha_copy = NULL; + phba->inb_counter = NULL; + } + } else { + phba->port_gp = phba->mbox->us.s2.port; + phba->inb_ha_copy = NULL; + phba->inb_counter = NULL; } - do_prep_failed: mempool_free(pmb, phba->mbox_mem_pool); return rc; @@ -3085,9 +3095,6 @@ lpfc_sli_hba_setup(struct lpfc_hba *phba) if (phba->sli_rev == 3) { phba->iocb_cmd_size = SLI3_IOCB_CMD_SIZE; phba->iocb_rsp_size = SLI3_IOCB_RSP_SIZE; - phba->sli3_options |= LPFC_SLI3_ENABLED; - phba->sli3_options |= LPFC_SLI3_HBQ_ENABLED; - } else { phba->iocb_cmd_size = SLI2_IOCB_CMD_SIZE; phba->iocb_rsp_size = SLI2_IOCB_RSP_SIZE; @@ -3255,7 +3262,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag) int i; unsigned long timeout; unsigned long drvr_flag = 0; - volatile uint32_t word0, ldata; + uint32_t word0, ldata; void __iomem *to_slim; int processing_queue = 0; @@ -3415,12 +3422,11 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag) if (psli->sli_flag & LPFC_SLI2_ACTIVE) { /* First copy command data to host SLIM area */ - lpfc_sli_pcimem_bcopy(mb, &phba->slim2p->mbx, MAILBOX_CMD_SIZE); + lpfc_sli_pcimem_bcopy(mb, phba->mbox, MAILBOX_CMD_SIZE); } else { if (mb->mbxCommand == MBX_CONFIG_PORT) { /* copy command data into host mbox for cmpl */ - lpfc_sli_pcimem_bcopy(mb, &phba->slim2p->mbx, - MAILBOX_CMD_SIZE); + lpfc_sli_pcimem_bcopy(mb, phba->mbox, MAILBOX_CMD_SIZE); } /* First copy mbox command data to HBA SLIM, skip past first @@ -3430,7 +3436,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag) MAILBOX_CMD_SIZE - sizeof (uint32_t)); /* Next copy over first word, with mbxOwner set */ - ldata = *((volatile uint32_t *)mb); + ldata = *((uint32_t *)mb); to_slim = phba->MBslimaddr; writel(ldata, to_slim); readl(to_slim); /* flush */ @@ -3462,7 +3468,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag) if (psli->sli_flag & LPFC_SLI2_ACTIVE) { /* First read mbox status word */ - word0 = *((volatile uint32_t *)&phba->slim2p->mbx); + word0 = *((uint32_t *)phba->mbox); word0 = le32_to_cpu(word0); } else { /* First read mbox status word */ @@ -3501,12 +3507,11 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag) if (psli->sli_flag & LPFC_SLI2_ACTIVE) { /* First copy command data */ - word0 = *((volatile uint32_t *) - &phba->slim2p->mbx); + word0 = *((uint32_t *)phba->mbox); word0 = le32_to_cpu(word0); if (mb->mbxCommand == MBX_CONFIG_PORT) { MAILBOX_t *slimmb; - volatile uint32_t slimword0; + uint32_t slimword0; /* Check real SLIM for any errors */ slimword0 = readl(phba->MBslimaddr); slimmb = (MAILBOX_t *) & slimword0; @@ -3527,8 +3532,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag) if (psli->sli_flag & LPFC_SLI2_ACTIVE) { /* copy results back to user */ - lpfc_sli_pcimem_bcopy(&phba->slim2p->mbx, mb, - MAILBOX_CMD_SIZE); + lpfc_sli_pcimem_bcopy(phba->mbox, mb, MAILBOX_CMD_SIZE); } else { /* First copy command data */ lpfc_memcpy_from_slim(mb, phba->MBslimaddr, @@ -5095,7 +5099,16 @@ lpfc_intr_handler(int irq, void *dev_id) * preserve status) and Link Attention */ spin_lock(&phba->hbalock); - ha_copy = readl(phba->HAregaddr); + if (phba->sli3_options & LPFC_SLI3_INB_ENABLED && + (phba->inb_last_counter != *phba->inb_counter)) { + phba->inb_last_counter = *phba->inb_counter; + ha_copy = le32_to_cpu(*phba->inb_ha_copy); + } else + ha_copy = readl(phba->HAregaddr); + if (unlikely(!ha_copy)) { + spin_unlock(&phba->hbalock); + return IRQ_NONE; + } /* If somebody is waiting to handle an eratt don't process it * here. The brdkill function will do this. */ @@ -5105,9 +5118,6 @@ lpfc_intr_handler(int irq, void *dev_id) readl(phba->HAregaddr); /* flush */ spin_unlock(&phba->hbalock); - if (unlikely(!ha_copy)) - return IRQ_NONE; - work_ha_copy = ha_copy & phba->work_ha_mask; if (unlikely(work_ha_copy)) { @@ -5194,7 +5204,7 @@ lpfc_intr_handler(int irq, void *dev_id) (phba->sli.mbox_active)) { pmb = phba->sli.mbox_active; pmbox = &pmb->mb; - mbox = &phba->slim2p->mbx; + mbox = phba->mbox; vport = pmb->vport; /* First check out the status word */ -- cgit v1.2.3 From d7c255b26d8e3f12164d82093de3bf22efad2b4a Mon Sep 17 00:00:00 2001 From: James Smart Date: Sun, 24 Aug 2008 21:50:00 -0400 Subject: [SCSI] lpfc 8.2.8 : Miscellaneous Bug Fixes Miscellaneous Fixes: - Fix the wrong variable name used for checking node active usage status - Fix numerous duplicate log message numbers - Fix change KERN_WARNING messages to KERN_INFO. - Stop sending erroneous LOGO to fabric after vport is already terminated - Fix HBQ allocates that were kalloc'ing w/ GFP_KERNEL while holding a lock. - Fix gcc 4.3.2 compiler warnings and a sparse warning - Fix bugs in handling unsolicited ct event queue - Reorder some of the initial link up checks, to remove odd VPI states. - Correct poor VPI handling - Add debug messages - Expand Update_CFG mailbox definition - Fix handling of VPD data offsets - Reorder loopback flags - convert to use offsetof() Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc.h | 2 +- drivers/scsi/lpfc/lpfc_attr.c | 32 ++++++----- drivers/scsi/lpfc/lpfc_crtn.h | 2 +- drivers/scsi/lpfc/lpfc_ct.c | 15 +++--- drivers/scsi/lpfc/lpfc_debugfs.c | 20 +++---- drivers/scsi/lpfc/lpfc_els.c | 87 +++++++++++++++--------------- drivers/scsi/lpfc/lpfc_hbadisc.c | 18 +++++-- drivers/scsi/lpfc/lpfc_hw.h | 31 +++++++++++ drivers/scsi/lpfc/lpfc_init.c | 30 +++++------ drivers/scsi/lpfc/lpfc_nportdisc.c | 9 +++- drivers/scsi/lpfc/lpfc_scsi.c | 6 +-- drivers/scsi/lpfc/lpfc_sli.c | 105 ++++++++++++++++++++++--------------- drivers/scsi/lpfc/lpfc_vport.c | 14 +++-- 13 files changed, 219 insertions(+), 152 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 327eeb05108..f57a416033b 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -499,7 +499,7 @@ struct lpfc_hba { wait_queue_head_t work_waitq; struct task_struct *worker_thread; - long data_flags; + unsigned long data_flags; uint32_t hbq_in_use; /* HBQs in use flag */ struct list_head hbqbuf_in_list; /* in-fly hbq buffer list */ diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 2926a2a7ee7..172b6b0a570 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -1302,7 +1302,7 @@ lpfc_##attr##_init(struct lpfc_vport *vport, int val) \ return 0;\ }\ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, \ - "0449 lpfc_"#attr" attribute cannot be set to %d, "\ + "0423 lpfc_"#attr" attribute cannot be set to %d, "\ "allowed range is ["#minval", "#maxval"]\n", val); \ vport->cfg_##attr = default;\ return -EINVAL;\ @@ -1334,7 +1334,7 @@ lpfc_##attr##_set(struct lpfc_vport *vport, int val) \ return 0;\ }\ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, \ - "0450 lpfc_"#attr" attribute cannot be set to %d, "\ + "0424 lpfc_"#attr" attribute cannot be set to %d, "\ "allowed range is ["#minval", "#maxval"]\n", val); \ return -EINVAL;\ } @@ -1803,7 +1803,7 @@ lpfc_nodev_tmo_init(struct lpfc_vport *vport, int val) vport->cfg_nodev_tmo = vport->cfg_devloss_tmo; if (val != LPFC_DEF_DEVLOSS_TMO) lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, - "0402 Ignoring nodev_tmo module " + "0407 Ignoring nodev_tmo module " "parameter because devloss_tmo is " "set.\n"); return 0; @@ -2030,7 +2030,7 @@ lpfc_restrict_login_init(struct lpfc_vport *vport, int val) { if (val < 0 || val > 1) { lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, - "0449 lpfc_restrict_login attribute cannot " + "0422 lpfc_restrict_login attribute cannot " "be set to %d, allowed range is [0, 1]\n", val); vport->cfg_restrict_login = 1; @@ -2065,7 +2065,7 @@ lpfc_restrict_login_set(struct lpfc_vport *vport, int val) { if (val < 0 || val > 1) { lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, - "0450 lpfc_restrict_login attribute cannot " + "0425 lpfc_restrict_login attribute cannot " "be set to %d, allowed range is [0, 1]\n", val); vport->cfg_restrict_login = 1; @@ -2249,7 +2249,7 @@ lpfc_link_speed_init(struct lpfc_hba *phba, int val) return 0; } lpfc_printf_log(phba, KERN_ERR, LOG_INIT, - "0454 lpfc_link_speed attribute cannot " + "0405 lpfc_link_speed attribute cannot " "be set to %d, allowed values are " "["LPFC_LINK_SPEED_STRING"]\n", val); phba->cfg_link_speed = 0; @@ -2787,17 +2787,15 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr, /* If HBA encountered an error attention, allow only DUMP * or RESTART mailbox commands until the HBA is restarted. */ - if ((phba->pport->stopped) && - (phba->sysfs_mbox.mbox->mb.mbxCommand != - MBX_DUMP_MEMORY && - phba->sysfs_mbox.mbox->mb.mbxCommand != - MBX_RESTART && - phba->sysfs_mbox.mbox->mb.mbxCommand != - MBX_WRITE_VPARMS)) { - sysfs_mbox_idle(phba); - spin_unlock_irq(&phba->hbalock); - return -EPERM; - } + if (phba->pport->stopped && + phba->sysfs_mbox.mbox->mb.mbxCommand != MBX_DUMP_MEMORY && + phba->sysfs_mbox.mbox->mb.mbxCommand != MBX_RESTART && + phba->sysfs_mbox.mbox->mb.mbxCommand != MBX_WRITE_VPARMS && + phba->sysfs_mbox.mbox->mb.mbxCommand != MBX_WRITE_WWN) + lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX, + "1259 mbox: Issued mailbox cmd " + "0x%x while in stopped state.\n", + phba->sysfs_mbox.mbox->mb.mbxCommand); phba->sysfs_mbox.mbox->vport = vport; diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index 1b8245213b8..189ce9f8a7b 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -269,7 +269,7 @@ void lpfc_dev_loss_tmo_callbk(struct fc_rport *rport); struct lpfc_vport *lpfc_create_port(struct lpfc_hba *, int, struct device *); int lpfc_vport_disable(struct fc_vport *fc_vport, bool disable); -void lpfc_mbx_unreg_vpi(struct lpfc_vport *); +int lpfc_mbx_unreg_vpi(struct lpfc_vport *); void destroy_port(struct lpfc_vport *); int lpfc_get_instance(void); void lpfc_host_attrib_init(struct Scsi_Host *); diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c index 0f387862cf7..71cfee884b8 100644 --- a/drivers/scsi/lpfc/lpfc_ct.c +++ b/drivers/scsi/lpfc/lpfc_ct.c @@ -134,25 +134,24 @@ lpfc_ct_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } list_del(&head); } else { - struct lpfc_iocbq *next; - - list_for_each_entry_safe(iocbq, next, &piocbq->list, list) { + INIT_LIST_HEAD(&head); + list_add_tail(&head, &piocbq->list); + list_for_each_entry(iocbq, &head, list) { icmd = &iocbq->iocb; if (icmd->ulpBdeCount == 0) - lpfc_ct_unsol_buffer(phba, piocbq, NULL, 0); + lpfc_ct_unsol_buffer(phba, iocbq, NULL, 0); for (i = 0; i < icmd->ulpBdeCount; i++) { paddr = getPaddr(icmd->un.cont64[i].addrHigh, icmd->un.cont64[i].addrLow); mp = lpfc_sli_ringpostbuf_get(phba, pring, paddr); size = icmd->un.cont64[i].tus.f.bdeSize; - lpfc_ct_unsol_buffer(phba, piocbq, mp, size); + lpfc_ct_unsol_buffer(phba, iocbq, mp, size); lpfc_in_buf_free(phba, mp); } - list_del(&iocbq->list); - lpfc_sli_release_iocbq(phba, iocbq); lpfc_post_buffer(phba, pring, i); } + list_del(&head); } } @@ -861,7 +860,7 @@ lpfc_cmpl_ct(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, retry++; lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, - "0216 Retrying NS cmd %x\n", cmdcode); + "0250 Retrying NS cmd %x\n", cmdcode); rc = lpfc_ns_cmd(vport, cmdcode, retry, 0); if (rc == 0) goto out; diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c index 2f6d34924b7..f85b99a7c43 100644 --- a/drivers/scsi/lpfc/lpfc_debugfs.c +++ b/drivers/scsi/lpfc/lpfc_debugfs.c @@ -1119,7 +1119,7 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport) atomic_set(&lpfc_debugfs_hba_count, 0); if (!lpfc_debugfs_root) { lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, - "0409 Cannot create debugfs root\n"); + "0408 Cannot create debugfs root\n"); goto debug_failed; } } @@ -1133,7 +1133,7 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport) debugfs_create_dir(name, lpfc_debugfs_root); if (!phba->hba_debugfs_root) { lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, - "0409 Cannot create debugfs hba\n"); + "0412 Cannot create debugfs hba\n"); goto debug_failed; } atomic_inc(&lpfc_debugfs_hba_count); @@ -1147,7 +1147,7 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport) phba, &lpfc_debugfs_op_hbqinfo); if (!phba->debug_hbqinfo) { lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, - "0409 Cannot create debugfs hbqinfo\n"); + "0411 Cannot create debugfs hbqinfo\n"); goto debug_failed; } @@ -1159,7 +1159,7 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport) phba, &lpfc_debugfs_op_dumpHBASlim); if (!phba->debug_dumpHBASlim) { lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, - "0409 Cannot create debugfs dumpHBASlim\n"); + "0413 Cannot create debugfs dumpHBASlim\n"); goto debug_failed; } @@ -1171,7 +1171,7 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport) phba, &lpfc_debugfs_op_dumpHostSlim); if (!phba->debug_dumpHostSlim) { lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, - "0409 Cannot create debugfs dumpHostSlim\n"); + "0414 Cannot create debugfs dumpHostSlim\n"); goto debug_failed; } @@ -1201,7 +1201,7 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport) phba, &lpfc_debugfs_op_slow_ring_trc); if (!phba->debug_slow_ring_trc) { lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, - "0409 Cannot create debugfs " + "0415 Cannot create debugfs " "slow_ring_trace\n"); goto debug_failed; } @@ -1212,7 +1212,7 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport) GFP_KERNEL); if (!phba->slow_ring_trc) { lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, - "0409 Cannot create debugfs " + "0416 Cannot create debugfs " "slow_ring buffer\n"); goto debug_failed; } @@ -1229,7 +1229,7 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport) debugfs_create_dir(name, phba->hba_debugfs_root); if (!vport->vport_debugfs_root) { lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, - "0409 Cant create debugfs"); + "0417 Cant create debugfs"); goto debug_failed; } atomic_inc(&phba->debugfs_vport_count); @@ -1258,7 +1258,7 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport) if (!vport->disc_trc) { lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, - "0409 Cannot create debugfs disc trace " + "0418 Cannot create debugfs disc trace " "buffer\n"); goto debug_failed; } @@ -1271,7 +1271,7 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport) vport, &lpfc_debugfs_op_disc_trc); if (!vport->debug_disc_trc) { lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, - "0409 Cannot create debugfs " + "0419 Cannot create debugfs " "discovery_trace\n"); goto debug_failed; } diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 89bd9ab46de..d0730e79c1a 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -473,7 +473,7 @@ lpfc_cmpl_els_flogi_fabric(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, */ list_for_each_entry_safe(np, next_np, &vport->fc_nodes, nlp_listp) { - if (!NLP_CHK_NODE_ACT(ndlp)) + if (!NLP_CHK_NODE_ACT(np)) continue; if ((np->nlp_state != NLP_STE_NPR_NODE) || !(np->nlp_flag & NLP_NPR_ADISC)) @@ -2585,7 +2585,7 @@ lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, (stat.un.b.lsRjtRsnCodeExp == LSEXP_INVALID_NPORT_ID)) ) { lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS, - "0123 FDISC Failed (x%x). " + "0122 FDISC Failed (x%x). " "Fabric Detected Bad WWN\n", stat.un.lsRjtError); lpfc_vport_set_state(vport, @@ -3966,7 +3966,7 @@ lpfc_els_rcv_rscn(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, if (rscn_id == hba_id) { /* ALL NPortIDs in RSCN are on HBA */ lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, - "0214 Ignore RSCN " + "0219 Ignore RSCN " "Data: x%x x%x x%x x%x\n", vport->fc_flag, payload_len, *lp, vport->fc_rscn_id_cnt); @@ -5165,8 +5165,6 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } phba->fc_stat.elsRcvFrame++; - if (elsiocb->context1) - lpfc_nlp_put(elsiocb->context1); elsiocb->context1 = lpfc_nlp_get(ndlp); elsiocb->vport = vport; @@ -5376,6 +5374,8 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, NULL); } + lpfc_nlp_put(elsiocb->context1); + elsiocb->context1 = NULL; return; dropit: @@ -5440,6 +5440,7 @@ lpfc_els_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, struct lpfc_dmabuf *bdeBuf1 = elsiocb->context2; struct lpfc_dmabuf *bdeBuf2 = elsiocb->context3; + elsiocb->context1 = NULL; elsiocb->context2 = NULL; elsiocb->context3 = NULL; @@ -5487,8 +5488,6 @@ lpfc_els_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, * The different unsolicited event handlers would tell us * if they are done with "mp" by setting context2 to NULL. */ - lpfc_nlp_put(elsiocb->context1); - elsiocb->context1 = NULL; if (elsiocb->context2) { lpfc_in_buf_free(phba, (struct lpfc_dmabuf *)elsiocb->context2); elsiocb->context2 = NULL; @@ -5750,54 +5749,56 @@ lpfc_cmpl_els_fdisc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, goto out; /* FDISC failed */ lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS, - "0124 FDISC failed. (%d/%d)\n", + "0126 FDISC failed. (%d/%d)\n", irsp->ulpStatus, irsp->un.ulpWord[4]); + goto fdisc_failed; + } if (vport->fc_vport->vport_state == FC_VPORT_INITIALIZING) lpfc_vport_set_state(vport, FC_VPORT_FAILED); lpfc_nlp_put(ndlp); /* giving up on FDISC. Cancel discovery timer */ lpfc_can_disctmo(vport); - } else { - spin_lock_irq(shost->host_lock); - vport->fc_flag |= FC_FABRIC; - if (vport->phba->fc_topology == TOPOLOGY_LOOP) - vport->fc_flag |= FC_PUBLIC_LOOP; - spin_unlock_irq(shost->host_lock); + spin_lock_irq(shost->host_lock); + vport->fc_flag |= FC_FABRIC; + if (vport->phba->fc_topology == TOPOLOGY_LOOP) + vport->fc_flag |= FC_PUBLIC_LOOP; + spin_unlock_irq(shost->host_lock); - vport->fc_myDID = irsp->un.ulpWord[4] & Mask_DID; - lpfc_vport_set_state(vport, FC_VPORT_ACTIVE); - if ((vport->fc_prevDID != vport->fc_myDID) && - !(vport->fc_flag & FC_VPORT_NEEDS_REG_VPI)) { - /* If our NportID changed, we need to ensure all - * remaining NPORTs get unreg_login'ed so we can - * issue unreg_vpi. - */ - list_for_each_entry_safe(np, next_np, - &vport->fc_nodes, nlp_listp) { - if (!NLP_CHK_NODE_ACT(ndlp) || - (np->nlp_state != NLP_STE_NPR_NODE) || - !(np->nlp_flag & NLP_NPR_ADISC)) - continue; - spin_lock_irq(shost->host_lock); - np->nlp_flag &= ~NLP_NPR_ADISC; - spin_unlock_irq(shost->host_lock); - lpfc_unreg_rpi(vport, np); - } - lpfc_mbx_unreg_vpi(vport); + vport->fc_myDID = irsp->un.ulpWord[4] & Mask_DID; + lpfc_vport_set_state(vport, FC_VPORT_ACTIVE); + if ((vport->fc_prevDID != vport->fc_myDID) && + !(vport->fc_flag & FC_VPORT_NEEDS_REG_VPI)) { + /* If our NportID changed, we need to ensure all + * remaining NPORTs get unreg_login'ed so we can + * issue unreg_vpi. + */ + list_for_each_entry_safe(np, next_np, + &vport->fc_nodes, nlp_listp) { + if (!NLP_CHK_NODE_ACT(ndlp) || + (np->nlp_state != NLP_STE_NPR_NODE) || + !(np->nlp_flag & NLP_NPR_ADISC)) + continue; spin_lock_irq(shost->host_lock); - vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI; + np->nlp_flag &= ~NLP_NPR_ADISC; spin_unlock_irq(shost->host_lock); + lpfc_unreg_rpi(vport, np); } - - if (vport->fc_flag & FC_VPORT_NEEDS_REG_VPI) - lpfc_register_new_vport(phba, vport, ndlp); - else - lpfc_do_scr_ns_plogi(phba, vport); - - /* Unconditionaly kick off releasing fabric node for vports */ - lpfc_nlp_put(ndlp); + lpfc_mbx_unreg_vpi(vport); + spin_lock_irq(shost->host_lock); + vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI; + spin_unlock_irq(shost->host_lock); } + if (vport->fc_flag & FC_VPORT_NEEDS_REG_VPI) + lpfc_register_new_vport(phba, vport, ndlp); + else + lpfc_do_scr_ns_plogi(phba, vport); + goto out; +fdisc_failed: + lpfc_vport_set_state(vport, FC_VPORT_FAILED); + /* Cancel discovery timer */ + lpfc_can_disctmo(vport); + lpfc_nlp_put(ndlp); out: lpfc_els_free_iocb(phba, cmdiocb); } diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index aaf398e5c93..72c1cf15ef2 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -207,8 +207,16 @@ lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp) return; } - if (ndlp->nlp_state == NLP_STE_MAPPED_NODE) + if (ndlp->nlp_state == NLP_STE_MAPPED_NODE) { + lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, + "0284 Devloss timeout Ignored on " + "WWPN %x:%x:%x:%x:%x:%x:%x:%x " + "NPort x%x\n", + *name, *(name+1), *(name+2), *(name+3), + *(name+4), *(name+5), *(name+6), *(name+7), + ndlp->nlp_DID); return; + } if (ndlp->nlp_type & NLP_FABRIC) { /* We will clean up these Nodes in linkup */ @@ -1169,7 +1177,7 @@ lpfc_mbx_cmpl_unreg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) scsi_host_put(shost); } -void +int lpfc_mbx_unreg_vpi(struct lpfc_vport *vport) { struct lpfc_hba *phba = vport->phba; @@ -1178,7 +1186,7 @@ lpfc_mbx_unreg_vpi(struct lpfc_vport *vport) mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!mbox) - return; + return 1; lpfc_unreg_vpi(phba, vport->vpi, mbox); mbox->vport = vport; @@ -1189,7 +1197,9 @@ lpfc_mbx_unreg_vpi(struct lpfc_vport *vport) "1800 Could not issue unreg_vpi\n"); mempool_free(mbox, phba->mbox_mem_pool); vport->unreg_vpi_cmpl = VPORT_ERROR; + return rc; } + return 0; } static void @@ -2778,7 +2788,7 @@ restart_disc: default: lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, - "0229 Unexpected discovery timeout, " + "0273 Unexpected discovery timeout, " "vport State x%x\n", vport->port_state); break; } diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h index a986332fecf..9f94dab5ea7 100644 --- a/drivers/scsi/lpfc/lpfc_hw.h +++ b/drivers/scsi/lpfc/lpfc_hw.h @@ -2318,6 +2318,36 @@ typedef struct { #define DMP_RSP_OFFSET 0x14 /* word 5 contains first word of rsp */ #define DMP_RSP_SIZE 0x6C /* maximum of 27 words of rsp data */ +/* Structure for MB Command UPDATE_CFG (0x1B) */ + +struct update_cfg_var { +#ifdef __BIG_ENDIAN_BITFIELD + uint32_t rsvd2:16; + uint32_t type:8; + uint32_t rsvd:1; + uint32_t ra:1; + uint32_t co:1; + uint32_t cv:1; + uint32_t req:4; + uint32_t entry_length:16; + uint32_t region_id:16; +#else /* __LITTLE_ENDIAN_BITFIELD */ + uint32_t req:4; + uint32_t cv:1; + uint32_t co:1; + uint32_t ra:1; + uint32_t rsvd:1; + uint32_t type:8; + uint32_t rsvd2:16; + uint32_t region_id:16; + uint32_t entry_length:16; +#endif + + uint32_t resp_info; + uint32_t byte_cnt; + uint32_t data_offset; +}; + struct hbq_mask { #ifdef __BIG_ENDIAN_BITFIELD uint8_t tmatch; @@ -2672,6 +2702,7 @@ typedef union { * NEW_FEATURE */ struct config_hbq_var varCfgHbq;/* cmd = 0x7c (CONFIG_HBQ) */ + struct update_cfg_var varUpdateCfg; /* cmd = 0x1B (UPDATE_CFG)*/ CONFIG_PORT_VAR varCfgPort; /* cmd = 0x88 (CONFIG_PORT) */ REG_VPI_VAR varRegVpi; /* cmd = 0x96 (REG_VPI) */ UNREG_VPI_VAR varUnregVpi; /* cmd = 0x97 (UNREG_VPI) */ diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 6a7a039e890..b8989c43aaf 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -183,12 +183,9 @@ lpfc_config_port_prep(struct lpfc_hba *phba) sizeof (phba->RandomData)); /* Get adapter VPD information */ - pmb->context2 = kmalloc(DMP_RSP_SIZE, GFP_KERNEL); - if (!pmb->context2) - goto out_free_mbox; lpfc_vpd_data = kmalloc(DMP_VPD_SIZE, GFP_KERNEL); if (!lpfc_vpd_data) - goto out_free_context2; + goto out_free_mbox; do { lpfc_dump_mem(phba, pmb, offset); @@ -203,15 +200,14 @@ lpfc_config_port_prep(struct lpfc_hba *phba) } if (mb->un.varDmp.word_cnt > DMP_VPD_SIZE - offset) mb->un.varDmp.word_cnt = DMP_VPD_SIZE - offset; - lpfc_sli_pcimem_bcopy(pmb->context2, lpfc_vpd_data + offset, + lpfc_sli_pcimem_bcopy(((uint8_t *)mb) + DMP_RSP_OFFSET, + lpfc_vpd_data + offset, mb->un.varDmp.word_cnt); offset += mb->un.varDmp.word_cnt; } while (mb->un.varDmp.word_cnt && offset < DMP_VPD_SIZE); lpfc_parse_vpd(phba, lpfc_vpd_data, offset); kfree(lpfc_vpd_data); -out_free_context2: - kfree(pmb->context2); out_free_mbox: mempool_free(pmb, phba->mbox_mem_pool); return 0; @@ -425,9 +421,8 @@ lpfc_config_port_post(struct lpfc_hba *phba) lpfc_init_link(phba, pmb, phba->cfg_topology, phba->cfg_link_speed); pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; - pmb->vport = vport; - rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT); lpfc_set_loopback_flag(phba); + rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT); if (rc != MBX_SUCCESS) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0454 Adapter failed to init, mbxCmd x%x " @@ -462,7 +457,7 @@ lpfc_config_port_post(struct lpfc_hba *phba) rc); mempool_free(pmb, phba->mbox_mem_pool); } - return (0); + return 0; } /** @@ -841,7 +836,7 @@ lpfc_handle_eratt(struct lpfc_hba *phba) temp_event_data.data = (uint32_t)temperature; lpfc_printf_log(phba, KERN_ERR, LOG_INIT, - "0459 Adapter maximum temperature exceeded " + "0406 Adapter maximum temperature exceeded " "(%ld), taking this port offline " "Data: x%x x%x x%x\n", temperature, phba->work_hs, @@ -1595,7 +1590,7 @@ lpfc_cleanup(struct lpfc_vport *vport) &vport->fc_nodes, nlp_listp) { lpfc_printf_vlog(ndlp->vport, KERN_ERR, LOG_NODE, - "0282: did:x%x ndlp:x%p " + "0282 did:x%x ndlp:x%p " "usgmap:x%x refcnt:%d\n", ndlp->nlp_DID, (void *)ndlp, ndlp->nlp_usg_map, @@ -2320,10 +2315,10 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) goto out_iounmap; memset(phba->slim2p.virt, 0, SLI2_SLIM_SIZE); - phba->mbox = phba->slim2p.virt; - phba->pcb = (phba->slim2p.virt + sizeof(MAILBOX_t)); - phba->IOCBs = (phba->slim2p.virt + sizeof(MAILBOX_t) + - sizeof(struct _PCB)); + phba->mbox = phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, mbx); + phba->pcb = (phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, pcb)); + phba->IOCBs = (phba->slim2p.virt + + offsetof(struct lpfc_sli2_slim, IOCBs)); phba->hbqslimp.virt = dma_alloc_coherent(&phba->pcidev->dev, lpfc_sli_hbq_size(), @@ -2889,7 +2884,8 @@ lpfc_init(void) error = pci_register_driver(&lpfc_driver); if (error) { fc_release_transport(lpfc_transport_template); - fc_release_transport(lpfc_vport_transport_template); + if (lpfc_enable_npiv) + fc_release_transport(lpfc_vport_transport_template); } return error; diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index 705c4ae1bdc..83ffa75378e 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -1853,8 +1853,13 @@ static uint32_t lpfc_cmpl_logo_npr_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, void *arg, uint32_t evt) { + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + if (ndlp->nlp_DID == Fabric_DID) { + spin_lock_irq(shost->host_lock); + vport->fc_flag &= ~(FC_FABRIC | FC_PUBLIC_LOOP); + spin_unlock_irq(shost->host_lock); + } lpfc_unreg_rpi(vport, ndlp); - /* This routine does nothing, just return the current state */ return ndlp->nlp_state; } @@ -2143,7 +2148,7 @@ lpfc_disc_state_machine(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, lpfc_nlp_put(ndlp); } else { lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, - "0212 DSM out state %d on NPort free\n", rc); + "0213 DSM out state %d on NPort free\n", rc); lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_DSM, "DSM out: ste:%d did:x%x flg:x%x", diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index c1bb90cf0d0..b73968b2b8b 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -627,9 +627,9 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, cmd->result = ScsiResult(DID_BUS_BUSY, 0); break; case IOSTAT_LOCAL_REJECT: - if (lpfc_cmd->result == RJT_UNAVAIL_PERM || + if (lpfc_cmd->result == IOERR_INVALID_RPI || lpfc_cmd->result == IOERR_NO_RESOURCES || - lpfc_cmd->result == RJT_LOGIN_REQUIRED) { + lpfc_cmd->result == IOERR_ABORT_REQUESTED) { cmd->result = ScsiResult(DID_REQUEUE, 0); break; } /* else: fall through */ @@ -1318,7 +1318,7 @@ lpfc_bus_reset_handler(struct scsi_cmnd *cmnd) struct lpfc_hba *phba = vport->phba; struct lpfc_nodelist *ndlp = NULL; int match; - int ret = SUCCESS, status, i; + int ret = SUCCESS, status = SUCCESS, i; int cnt; struct lpfc_scsi_buf * lpfc_cmd; unsigned long later; diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 77afa2ba6a2..c7a520fa1aa 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -844,48 +844,58 @@ struct lpfc_hbq_init *lpfc_hbq_defs[] = { * @hbqno: HBQ number. * @count: Number of HBQ buffers to be posted. * - * This function is called with no lock held to post more - * hbq buffers to the given HBQ. The function returns 0 - * when successful and returns 1 other wise. + * This function is called with no lock held to post more hbq buffers to the + * given HBQ. The function returns the number of HBQ buffers successfully + * posted. **/ static int lpfc_sli_hbqbuf_fill_hbqs(struct lpfc_hba *phba, uint32_t hbqno, uint32_t count) { - uint32_t i, start, end; + uint32_t i, posted = 0; unsigned long flags; struct hbq_dmabuf *hbq_buffer; - + LIST_HEAD(hbq_buf_list); if (!phba->hbqs[hbqno].hbq_alloc_buffer) return 0; - start = phba->hbqs[hbqno].buffer_count; - end = count + start; - if (end > lpfc_hbq_defs[hbqno]->entry_count) - end = lpfc_hbq_defs[hbqno]->entry_count; - + if ((phba->hbqs[hbqno].buffer_count + count) > + lpfc_hbq_defs[hbqno]->entry_count) + count = lpfc_hbq_defs[hbqno]->entry_count - + phba->hbqs[hbqno].buffer_count; + if (!count) + return 0; + /* Allocate HBQ entries */ + for (i = 0; i < count; i++) { + hbq_buffer = (phba->hbqs[hbqno].hbq_alloc_buffer)(phba); + if (!hbq_buffer) + break; + list_add_tail(&hbq_buffer->dbuf.list, &hbq_buf_list); + } /* Check whether HBQ is still in use */ spin_lock_irqsave(&phba->hbalock, flags); if (!phba->hbq_in_use) - goto out; - - /* Populate HBQ entries */ - for (i = start; i < end; i++) { - hbq_buffer = (phba->hbqs[hbqno].hbq_alloc_buffer)(phba); - if (!hbq_buffer) - goto err; - hbq_buffer->tag = (i | (hbqno << 16)); - if (lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buffer)) + goto err; + while (!list_empty(&hbq_buf_list)) { + list_remove_head(&hbq_buf_list, hbq_buffer, struct hbq_dmabuf, + dbuf.list); + hbq_buffer->tag = (phba->hbqs[hbqno].buffer_count | + (hbqno << 16)); + if (lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buffer)) { phba->hbqs[hbqno].buffer_count++; - else + posted++; + } else (phba->hbqs[hbqno].hbq_free_buffer)(phba, hbq_buffer); } - - out: spin_unlock_irqrestore(&phba->hbalock, flags); - return 0; - err: + return posted; +err: spin_unlock_irqrestore(&phba->hbalock, flags); - return 1; + while (!list_empty(&hbq_buf_list)) { + list_remove_head(&hbq_buf_list, hbq_buffer, struct hbq_dmabuf, + dbuf.list); + (phba->hbqs[hbqno].hbq_free_buffer)(phba, hbq_buffer); + } + return 0; } /** @@ -894,8 +904,8 @@ lpfc_sli_hbqbuf_fill_hbqs(struct lpfc_hba *phba, uint32_t hbqno, uint32_t count) * @qno: HBQ number. * * This function posts more buffers to the HBQ. This function - * is called with no lock held. The function returns 0 when - * successful and returns 1 otherwise. + * is called with no lock held. The function returns the number of HBQ entries + * successfully allocated. **/ int lpfc_sli_hbqbuf_add_hbqs(struct lpfc_hba *phba, uint32_t qno) @@ -911,7 +921,7 @@ lpfc_sli_hbqbuf_add_hbqs(struct lpfc_hba *phba, uint32_t qno) * * This function is called from SLI initialization code path with * no lock held to post initial HBQ buffers to firmware. The - * function returns 0 when successful and returns 1 otherwise. + * function returns the number of HBQ entries successfully allocated. **/ static int lpfc_sli_hbqbuf_init_hbqs(struct lpfc_hba *phba, uint32_t qno) @@ -1253,7 +1263,9 @@ lpfc_sli_handle_mb_event(struct lpfc_hba *phba) * This function is called from unsolicited event handler code path to get the * HBQ buffer associated with an unsolicited iocb. This function is called with * no lock held. It returns the buffer associated with the given tag and posts - * another buffer to the firmware. + * another buffer to the firmware. Note that the new buffer must be allocated + * before taking the hbalock and that the hba lock must be held until it is + * finished with the hbq entry swap. **/ static struct lpfc_dmabuf * lpfc_sli_replace_hbqbuff(struct lpfc_hba *phba, uint32_t tag) @@ -1264,22 +1276,28 @@ lpfc_sli_replace_hbqbuff(struct lpfc_hba *phba, uint32_t tag) dma_addr_t phys; /* mapped address */ unsigned long flags; + hbqno = tag >> 16; + new_hbq_entry = (phba->hbqs[hbqno].hbq_alloc_buffer)(phba); /* Check whether HBQ is still in use */ spin_lock_irqsave(&phba->hbalock, flags); if (!phba->hbq_in_use) { + if (new_hbq_entry) + (phba->hbqs[hbqno].hbq_free_buffer)(phba, + new_hbq_entry); spin_unlock_irqrestore(&phba->hbalock, flags); return NULL; } hbq_entry = lpfc_sli_hbqbuf_find(phba, tag); if (hbq_entry == NULL) { + if (new_hbq_entry) + (phba->hbqs[hbqno].hbq_free_buffer)(phba, + new_hbq_entry); spin_unlock_irqrestore(&phba->hbalock, flags); return NULL; } list_del(&hbq_entry->dbuf.list); - hbqno = tag >> 16; - new_hbq_entry = (phba->hbqs[hbqno].hbq_alloc_buffer)(phba); if (new_hbq_entry == NULL) { list_add_tail(&hbq_entry->dbuf.list, &phba->hbqbuf_in_list); spin_unlock_irqrestore(&phba->hbalock, flags); @@ -1748,8 +1766,8 @@ void lpfc_sli_poll_fcp_ring(struct lpfc_hba *phba) irsp->un.ulpWord[3], irsp->un.ulpWord[4], irsp->un.ulpWord[5], - *(((uint32_t *) irsp) + 6), - *(((uint32_t *) irsp) + 7)); + *(uint32_t *)&irsp->un1, + *((uint32_t *)&irsp->un1 + 1)); } switch (type) { @@ -1935,8 +1953,8 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba *phba, irsp->un.ulpWord[3], irsp->un.ulpWord[4], irsp->un.ulpWord[5], - *(((uint32_t *) irsp) + 6), - *(((uint32_t *) irsp) + 7)); + *(uint32_t *)&irsp->un1, + *((uint32_t *)&irsp->un1 + 1)); } switch (type) { @@ -2921,10 +2939,8 @@ lpfc_sli_hbq_setup(struct lpfc_hba *phba) mempool_free(pmb, phba->mbox_mem_pool); /* Initially populate or replenish the HBQs */ - for (hbqno = 0; hbqno < hbq_count; ++hbqno) { - if (lpfc_sli_hbqbuf_init_hbqs(phba, hbqno)) - return -ENOMEM; - } + for (hbqno = 0; hbqno < hbq_count; ++hbqno) + lpfc_sli_hbqbuf_init_hbqs(phba, hbqno); return 0; } @@ -3034,6 +3050,7 @@ lpfc_do_config_port(struct lpfc_hba *phba, int sli_mode) phba->port_gp = phba->mbox->us.s2.port; phba->inb_ha_copy = NULL; phba->inb_counter = NULL; + phba->max_vpi = 0; } do_prep_failed: mempool_free(pmb, phba->mbox_mem_pool); @@ -4335,7 +4352,7 @@ lpfc_sli_ring_taggedbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, spin_unlock_irq(&phba->hbalock); lpfc_printf_log(phba, KERN_ERR, LOG_INIT, - "0410 Cannot find virtual addr for buffer tag on " + "0402 Cannot find virtual addr for buffer tag on " "ring %d Data x%lx x%p x%p x%x\n", pring->ringno, (unsigned long) tag, slp->next, slp->prev, pring->postbufq_cnt); @@ -4482,7 +4499,7 @@ lpfc_ignore_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, /* ELS cmd tag completes */ lpfc_printf_log(phba, KERN_INFO, LOG_ELS, - "0133 Ignoring ELS cmd tag x%x completion Data: " + "0139 Ignoring ELS cmd tag x%x completion Data: " "x%x x%x x%x\n", irsp->ulpIoTag, irsp->ulpStatus, irsp->un.ulpWord[4], irsp->ulpTimeout); @@ -4568,6 +4585,8 @@ lpfc_sli_issue_abort_iotag(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, iabt->un.acxri.abortIoTag, abtsiocbp->iotag); retval = __lpfc_sli_issue_iocb(phba, pring, abtsiocbp, 0); + if (retval) + __lpfc_sli_release_iocbq(phba, abtsiocbp); abort_iotag_exit: /* * Caller to this routine should check for IOCB_ERROR @@ -4899,7 +4918,7 @@ lpfc_sli_issue_iocb_wait(struct lpfc_hba *phba, } } else { lpfc_printf_log(phba, KERN_INFO, LOG_SLI, - ":0332 IOCB wait issue failed, Data x%x\n", + "0332 IOCB wait issue failed, Data x%x\n", retval); retval = IOCB_ERROR; } @@ -5271,7 +5290,7 @@ lpfc_intr_handler(int irq, void *dev_id) lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, - "0306 rc should have" + "0350 rc should have" "been MBX_BUSY"); goto send_current_mbox; } diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c index ad0f6531387..2578d5fd953 100644 --- a/drivers/scsi/lpfc/lpfc_vport.c +++ b/drivers/scsi/lpfc/lpfc_vport.c @@ -577,8 +577,12 @@ lpfc_vport_delete(struct fc_vport *fc_vport) * initiated after we've disposed of all other resources associated * with the port. */ - if (!scsi_host_get(shost) || !scsi_host_get(shost)) + if (!scsi_host_get(shost)) return VPORT_INVAL; + if (!scsi_host_get(shost)) { + scsi_host_put(shost); + return VPORT_INVAL; + } spin_lock_irq(&phba->hbalock); vport->load_flag |= FC_UNLOADING; spin_unlock_irq(&phba->hbalock); @@ -668,6 +672,8 @@ lpfc_vport_delete(struct fc_vport *fc_vport) } vport->unreg_vpi_cmpl = VPORT_INVAL; timeout = msecs_to_jiffies(phba->fc_ratov * 2000); + if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) + goto skip_logo; if (!lpfc_issue_els_npiv_logo(vport, ndlp)) while (vport->unreg_vpi_cmpl == VPORT_INVAL && timeout) timeout = schedule_timeout(timeout); @@ -689,8 +695,10 @@ skip_logo: * Completion of unreg_vpi (lpfc_mbx_cmpl_unreg_vpi) * does the scsi_host_put() to release the vport. */ - lpfc_mbx_unreg_vpi(vport); - } + if (lpfc_mbx_unreg_vpi(vport)) + scsi_host_put(shost); + } else + scsi_host_put(shost); lpfc_free_vpi(phba, vport->vpi); vport->work_port_events = 0; -- cgit v1.2.3 From 84774a4d0a4dba8a5767da6c58ea5a8c5b0cfe25 Mon Sep 17 00:00:00 2001 From: James Smart Date: Sun, 24 Aug 2008 21:50:06 -0400 Subject: [SCSI] lpfc 8.2.8 : Add new FCOE hardware support Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc.h | 4 ++- drivers/scsi/lpfc/lpfc_attr.c | 33 +++++++++++++++++--- drivers/scsi/lpfc/lpfc_hbadisc.c | 66 ++++++++++++++++++++++++++++++++++------ drivers/scsi/lpfc/lpfc_hw.h | 26 ++++++++++++++-- drivers/scsi/lpfc/lpfc_init.c | 30 ++++++++++++++++-- drivers/scsi/lpfc/lpfc_sli.c | 12 ++++++++ drivers/scsi/lpfc/lpfc_sli.h | 1 + 7 files changed, 153 insertions(+), 19 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index f57a416033b..aee5444b63d 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -613,6 +613,7 @@ struct lpfc_hba { unsigned long last_completion_time; struct timer_list hb_tmofunc; uint8_t hb_outstanding; + enum hba_temp_state over_temp_state; /* ndlp reference management */ spinlock_t ndlp_lock; /* @@ -621,7 +622,8 @@ struct lpfc_hba { */ #define QUE_BUFTAG_BIT (1<<31) uint32_t buffer_tag_count; - enum hba_temp_state over_temp_state; + int wait_4_mlo_maint_flg; + wait_queue_head_t wait_4_mlo_m_q; }; static inline struct Scsi_Host * diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 172b6b0a570..b9acc6eefe6 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -210,6 +210,25 @@ lpfc_programtype_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "%s\n",phba->ProgramType); } +/** + * lpfc_mlomgmt_show: Return the Menlo Maintenance sli flag. + * @dev: class converted to a Scsi_host structure. + * @attr: device attribute, not used. + * @buf: on return contains the Menlo Maintenance sli flag. + * + * Returns: size of formatted string. + **/ +static ssize_t +lpfc_mlomgmt_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; + struct lpfc_hba *phba = vport->phba; + + return snprintf(buf, PAGE_SIZE, "%d\n", + (phba->sli.sli_flag & LPFC_MENLO_MAINT)); +} + /** * lpfc_vportnum_show: Return the port number in ascii of the hba. * @dev: class converted to a Scsi_host structure. @@ -352,8 +371,10 @@ lpfc_link_state_show(struct device *dev, struct device_attribute *attr, "Unknown\n"); break; } - - if (phba->fc_topology == TOPOLOGY_LOOP) { + if (phba->sli.sli_flag & LPFC_MENLO_MAINT) + len += snprintf(buf + len, PAGE_SIZE-len, + " Menlo Maint Mode\n"); + else if (phba->fc_topology == TOPOLOGY_LOOP) { if (vport->fc_flag & FC_PUBLIC_LOOP) len += snprintf(buf + len, PAGE_SIZE-len, " Public Loop\n"); @@ -1476,6 +1497,7 @@ static DEVICE_ATTR(option_rom_version, S_IRUGO, lpfc_option_rom_version_show, NULL); static DEVICE_ATTR(num_discovered_ports, S_IRUGO, lpfc_num_discovered_ports_show, NULL); +static DEVICE_ATTR(menlo_mgmt_mode, S_IRUGO, lpfc_mlomgmt_show, NULL); static DEVICE_ATTR(nport_evt_cnt, S_IRUGO, lpfc_nport_evt_cnt_show, NULL); static DEVICE_ATTR(lpfc_drvr_version, S_IRUGO, lpfc_drvr_version_show, NULL); static DEVICE_ATTR(board_mode, S_IRUGO | S_IWUSR, @@ -2395,6 +2417,7 @@ struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_option_rom_version, &dev_attr_link_state, &dev_attr_num_discovered_ports, + &dev_attr_menlo_mgmt_mode, &dev_attr_lpfc_drvr_version, &dev_attr_lpfc_temp_sensor, &dev_attr_lpfc_log_verbose, @@ -2763,6 +2786,8 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr, case MBX_DEL_LD_ENTRY: case MBX_SET_VARIABLE: case MBX_WRITE_WWN: + case MBX_PORT_CAPABILITIES: + case MBX_PORT_IOV_CONTROL: break; case MBX_READ_SPARM64: case MBX_READ_LA: @@ -2867,7 +2892,7 @@ static struct bin_attribute sysfs_mbox_attr = { }; /** - * lpfc_alloc_sysfs_attr: Creates the sysfs, ctlreg, menlo and mbox entries. + * lpfc_alloc_sysfs_attr: Creates the ctlreg and mbox entries. * @vport: address of lpfc vport structure. * * Return codes: @@ -2898,7 +2923,7 @@ out: } /** - * lpfc_free_sysfs_attr: Removes the sysfs, ctlreg, menlo and mbox entries. + * lpfc_free_sysfs_attr: Removes the ctlreg and mbox entries. * @vport: address of lpfc vport structure. **/ void diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 72c1cf15ef2..b4ef8362353 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -1013,14 +1013,10 @@ out: } static void -lpfc_mbx_issue_link_down(struct lpfc_hba *phba) +lpfc_enable_la(struct lpfc_hba *phba) { uint32_t control; struct lpfc_sli *psli = &phba->sli; - - lpfc_linkdown(phba); - - /* turn on Link Attention interrupts - no CLEAR_LA needed */ spin_lock_irq(&phba->hbalock); psli->sli_flag |= LPFC_PROCESS_LA; control = readl(phba->HCregaddr); @@ -1030,6 +1026,15 @@ lpfc_mbx_issue_link_down(struct lpfc_hba *phba) spin_unlock_irq(&phba->hbalock); } +static void +lpfc_mbx_issue_link_down(struct lpfc_hba *phba) +{ + lpfc_linkdown(phba); + lpfc_enable_la(phba); + /* turn on Link Attention interrupts - no CLEAR_LA needed */ +} + + /* * This routine handles processing a READ_LA mailbox * command upon completion. It is setup in the LPFC_MBOXQ @@ -1077,8 +1082,12 @@ lpfc_mbx_cmpl_read_la(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) } phba->fc_eventTag = la->eventTag; + if (la->mm) + phba->sli.sli_flag |= LPFC_MENLO_MAINT; + else + phba->sli.sli_flag &= ~LPFC_MENLO_MAINT; - if (la->attType == AT_LINK_UP) { + if (la->attType == AT_LINK_UP && (!la->mm)) { phba->fc_stat.LinkUp++; if (phba->link_flag & LS_LOOPBACK_MODE) { lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, @@ -1090,13 +1099,15 @@ lpfc_mbx_cmpl_read_la(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) } else { lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, "1303 Link Up Event x%x received " - "Data: x%x x%x x%x x%x\n", + "Data: x%x x%x x%x x%x x%x x%x %d\n", la->eventTag, phba->fc_eventTag, la->granted_AL_PA, la->UlnkSpeed, - phba->alpa_map[0]); + phba->alpa_map[0], + la->mm, la->fa, + phba->wait_4_mlo_maint_flg); } lpfc_mbx_process_link_up(phba, la); - } else { + } else if (la->attType == AT_LINK_DOWN) { phba->fc_stat.LinkDown++; if (phba->link_flag & LS_LOOPBACK_MODE) { lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, @@ -1109,11 +1120,46 @@ lpfc_mbx_cmpl_read_la(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) else { lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, "1305 Link Down Event x%x received " + "Data: x%x x%x x%x x%x x%x\n", + la->eventTag, phba->fc_eventTag, + phba->pport->port_state, vport->fc_flag, + la->mm, la->fa); + } + lpfc_mbx_issue_link_down(phba); + } + if (la->mm && la->attType == AT_LINK_UP) { + if (phba->link_state != LPFC_LINK_DOWN) { + phba->fc_stat.LinkDown++; + lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, + "1312 Link Down Event x%x received " + "Data: x%x x%x x%x\n", + la->eventTag, phba->fc_eventTag, + phba->pport->port_state, vport->fc_flag); + lpfc_mbx_issue_link_down(phba); + } else + lpfc_enable_la(phba); + + lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, + "1310 Menlo Maint Mode Link up Event x%x rcvd " "Data: x%x x%x x%x\n", la->eventTag, phba->fc_eventTag, phba->pport->port_state, vport->fc_flag); + /* + * The cmnd that triggered this will be waiting for this + * signal. + */ + /* WAKEUP for MENLO_SET_MODE or MENLO_RESET command. */ + if (phba->wait_4_mlo_maint_flg) { + phba->wait_4_mlo_maint_flg = 0; + wake_up_interruptible(&phba->wait_4_mlo_m_q); } - lpfc_mbx_issue_link_down(phba); + } + + if (la->fa) { + if (la->mm) + lpfc_issue_clear_la(phba, vport); + lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT, + "1311 fa %d\n", la->fa); } lpfc_mbx_cmpl_read_la_free_mbuf: diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h index 9f94dab5ea7..ee4e50175ca 100644 --- a/drivers/scsi/lpfc/lpfc_hw.h +++ b/drivers/scsi/lpfc/lpfc_hw.h @@ -1107,6 +1107,8 @@ typedef struct { /* Start FireFly Register definitions */ #define PCI_VENDOR_ID_EMULEX 0x10df #define PCI_DEVICE_ID_FIREFLY 0x1ae5 +#define PCI_DEVICE_ID_PROTEUS_VF 0xe100 +#define PCI_DEVICE_ID_PROTEUS_PF 0xe180 #define PCI_DEVICE_ID_SAT_SMB 0xf011 #define PCI_DEVICE_ID_SAT_MID 0xf015 #define PCI_DEVICE_ID_RFLY 0xf095 @@ -1133,10 +1135,12 @@ typedef struct { #define PCI_DEVICE_ID_LP11000S 0xfc10 #define PCI_DEVICE_ID_LPE11000S 0xfc20 #define PCI_DEVICE_ID_SAT_S 0xfc40 +#define PCI_DEVICE_ID_PROTEUS_S 0xfc50 #define PCI_DEVICE_ID_HELIOS 0xfd00 #define PCI_DEVICE_ID_HELIOS_SCSP 0xfd11 #define PCI_DEVICE_ID_HELIOS_DCSP 0xfd12 #define PCI_DEVICE_ID_ZEPHYR 0xfe00 +#define PCI_DEVICE_ID_HORNET 0xfe05 #define PCI_DEVICE_ID_ZEPHYR_SCSP 0xfe11 #define PCI_DEVICE_ID_ZEPHYR_DCSP 0xfe12 @@ -1154,6 +1158,7 @@ typedef struct { #define ZEPHYR_JEDEC_ID 0x0577 #define VIPER_JEDEC_ID 0x4838 #define SATURN_JEDEC_ID 0x1004 +#define HORNET_JDEC_ID 0x2057706D #define JEDEC_ID_MASK 0x0FFFF000 #define JEDEC_ID_SHIFT 12 @@ -1289,6 +1294,9 @@ typedef struct { /* FireFly BIU registers */ #define MBX_WRITE_VPARMS 0x32 #define MBX_ASYNCEVT_ENABLE 0x33 +#define MBX_PORT_CAPABILITIES 0x3B +#define MBX_PORT_IOV_CONTROL 0x3C + #define MBX_CONFIG_HBQ 0x7C #define MBX_LOAD_AREA 0x81 #define MBX_RUN_BIU_DIAG64 0x84 @@ -2195,7 +2203,10 @@ typedef struct { typedef struct { uint32_t eventTag; /* Event tag */ #ifdef __BIG_ENDIAN_BITFIELD - uint32_t rsvd1:22; + uint32_t rsvd1:19; + uint32_t fa:1; + uint32_t mm:1; /* Menlo Maintenance mode enabled */ + uint32_t rx:1; uint32_t pb:1; uint32_t il:1; uint32_t attType:8; @@ -2203,7 +2214,10 @@ typedef struct { uint32_t attType:8; uint32_t il:1; uint32_t pb:1; - uint32_t rsvd1:22; + uint32_t rx:1; + uint32_t mm:1; + uint32_t fa:1; + uint32_t rsvd1:19; #endif #define AT_RESERVED 0x00 /* Reserved - attType */ @@ -2224,6 +2238,7 @@ typedef struct { #define TOPOLOGY_PT_PT 0x01 /* Topology is pt-pt / pt-fabric */ #define TOPOLOGY_LOOP 0x02 /* Topology is FC-AL */ +#define TOPOLOGY_LNK_MENLO_MAINTENANCE 0x05 /* maint mode zephtr to menlo */ union { struct ulp_bde lilpBde; /* This BDE points to a 128 byte buffer @@ -3346,3 +3361,10 @@ lpfc_error_lost_link(IOCB_t *iocbp) iocbp->un.ulpWord[4] == IOERR_LINK_DOWN || iocbp->un.ulpWord[4] == IOERR_SLI_DOWN)); } + +#define MENLO_TRANSPORT_TYPE 0xfe +#define MENLO_CONTEXT 0 +#define MENLO_PU 3 +#define MENLO_TIMEOUT 30 +#define SETVAR_MLOMNT 0x103107 +#define SETVAR_MLORST 0x103007 diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index b8989c43aaf..41a8c13e695 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -1130,6 +1130,7 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp) lpfc_vpd_t *vp; uint16_t dev_id = phba->pcidev->device; int max_speed; + int GE = 0; struct { char * name; int max_speed; @@ -1261,6 +1262,19 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp) case PCI_DEVICE_ID_SAT_S: m = (typeof(m)){"LPe12000-S", max_speed, "PCIe"}; break; + case PCI_DEVICE_ID_HORNET: + m = (typeof(m)){"LP21000", max_speed, "PCIe"}; + GE = 1; + break; + case PCI_DEVICE_ID_PROTEUS_VF: + m = (typeof(m)) {"LPev12000", max_speed, "PCIe IOV"}; + break; + case PCI_DEVICE_ID_PROTEUS_PF: + m = (typeof(m)) {"LPev12000", max_speed, "PCIe IOV"}; + break; + case PCI_DEVICE_ID_PROTEUS_S: + m = (typeof(m)) {"LPemv12002-S", max_speed, "PCIe IOV"}; + break; default: m = (typeof(m)){ NULL }; break; @@ -1270,8 +1284,11 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp) snprintf(mdp, 79,"%s", m.name); if (descp && descp[0] == '\0') snprintf(descp, 255, - "Emulex %s %dGb %s Fibre Channel Adapter", - m.name, m.max_speed, m.bus); + "Emulex %s %d%s %s %s", + m.name, m.max_speed, + (GE) ? "GE" : "Gb", + m.bus, + (GE) ? "FCoE Adapter" : "Fibre Channel Adapter"); } /** @@ -2248,6 +2265,7 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) goto out_free_phba; INIT_LIST_HEAD(&phba->port_list); + init_waitqueue_head(&phba->wait_4_mlo_m_q); /* * Get all the module params for configuring this host and then * establish the host. @@ -2796,6 +2814,8 @@ static struct pci_device_id lpfc_id_table[] = { PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZEPHYR, PCI_ANY_ID, PCI_ANY_ID, }, + {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_HORNET, + PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZEPHYR_SCSP, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZEPHYR_DCSP, @@ -2826,6 +2846,12 @@ static struct pci_device_id lpfc_id_table[] = { PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SAT_S, PCI_ANY_ID, PCI_ANY_ID, }, + {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PROTEUS_VF, + PCI_ANY_ID, PCI_ANY_ID, }, + {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PROTEUS_PF, + PCI_ANY_ID, PCI_ANY_ID, }, + {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PROTEUS_S, + PCI_ANY_ID, PCI_ANY_ID, }, { 0 } }; diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index c7a520fa1aa..857bc0a57c4 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -1050,6 +1050,8 @@ lpfc_sli_chk_mbx_command(uint8_t mbxCommand) case MBX_REG_VPI: case MBX_UNREG_VPI: case MBX_HEARTBEAT: + case MBX_PORT_CAPABILITIES: + case MBX_PORT_IOV_CONTROL: ret = mbxCommand; break; default: @@ -3697,6 +3699,16 @@ __lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, * can be issued if the link is not up. */ switch (piocb->iocb.ulpCommand) { + case CMD_GEN_REQUEST64_CR: + case CMD_GEN_REQUEST64_CX: + if (!(phba->sli.sli_flag & LPFC_MENLO_MAINT) || + (piocb->iocb.un.genreq64.w5.hcsw.Rctl != + FC_FCP_CMND) || + (piocb->iocb.un.genreq64.w5.hcsw.Type != + MENLO_TRANSPORT_TYPE)) + + goto iocb_busy; + break; case CMD_QUE_RING_BUF_CN: case CMD_QUE_RING_BUF64_CN: /* diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h index 7249fd252cb..883938652a6 100644 --- a/drivers/scsi/lpfc/lpfc_sli.h +++ b/drivers/scsi/lpfc/lpfc_sli.h @@ -233,6 +233,7 @@ struct lpfc_sli { #define LPFC_SLI2_ACTIVE 0x200 /* SLI2 overlay in firmware is active */ #define LPFC_PROCESS_LA 0x400 /* Able to process link attention */ #define LPFC_BLOCK_MGMT_IO 0x800 /* Don't allow mgmt mbx or iocb cmds */ +#define LPFC_MENLO_MAINT 0x1000 /* need for menl fw download */ struct lpfc_sli_ring ring[LPFC_MAX_RING]; int fcp_ring; /* ring used for FCP initiator commands */ -- cgit v1.2.3 From a8e497d51e6adb2dd6ef307ae76f3433a4dbe895 Mon Sep 17 00:00:00 2001 From: James Smart Date: Sun, 24 Aug 2008 21:50:11 -0400 Subject: [SCSI] lpfc 8.2.8 : Add support for PCI-EEH permanent disabling Add support for PCI-EEH permanent-disabling a device via lpfc_pci_remove_one() Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_crtn.h | 2 ++ drivers/scsi/lpfc/lpfc_hbadisc.c | 2 -- drivers/scsi/lpfc/lpfc_init.c | 9 +++++- drivers/scsi/lpfc/lpfc_scsi.c | 29 ++++++++++++++++++ drivers/scsi/lpfc/lpfc_sli.c | 64 ++++++++++++++++++++++++++++++++++++++++ 5 files changed, 103 insertions(+), 3 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index 189ce9f8a7b..495afd06936 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -199,6 +199,7 @@ int lpfc_sli_issue_iocb(struct lpfc_hba *, struct lpfc_sli_ring *, struct lpfc_iocbq *, uint32_t); void lpfc_sli_pcimem_bcopy(void *, void *, uint32_t); void lpfc_sli_abort_iocb_ring(struct lpfc_hba *, struct lpfc_sli_ring *); +void lpfc_sli_flush_fcp_rings(struct lpfc_hba *); int lpfc_sli_ringpostbuf_put(struct lpfc_hba *, struct lpfc_sli_ring *, struct lpfc_dmabuf *); struct lpfc_dmabuf *lpfc_sli_ringpostbuf_get(struct lpfc_hba *, @@ -290,6 +291,7 @@ void lpfc_unblock_fabric_iocbs(struct lpfc_hba *); void lpfc_adjust_queue_depth(struct lpfc_hba *); void lpfc_ramp_down_queue_handler(struct lpfc_hba *); void lpfc_ramp_up_queue_handler(struct lpfc_hba *); +void lpfc_scsi_dev_block(struct lpfc_hba *); #define ScsiResult(host_code, scsi_code) (((host_code) << 16) | scsi_code) #define HBA_EVENT_RSCN 5 diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index b4ef8362353..897ef7d7a8e 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -237,8 +237,6 @@ lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp) lpfc_sli_abort_iocb(vport, &phba->sli.ring[phba->sli.fcp_ring], ndlp->nlp_sid, 0, LPFC_CTX_TGT); } - if (vport->load_flag & FC_UNLOADING) - warn_on = 0; if (warn_on) { lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 41a8c13e695..333166b1790 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -2661,8 +2661,15 @@ static pci_ers_result_t lpfc_io_error_detected(struct pci_dev *pdev, struct lpfc_sli *psli = &phba->sli; struct lpfc_sli_ring *pring; - if (state == pci_channel_io_perm_failure) + if (state == pci_channel_io_perm_failure) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "0472 PCI channel I/O permanent failure\n"); + /* Block all SCSI devices' I/Os on the host */ + lpfc_scsi_dev_block(phba); + /* Clean up all driver's outstanding SCSI I/Os */ + lpfc_sli_flush_fcp_rings(phba); return PCI_ERS_RESULT_DISCONNECT; + } pci_disable_device(pdev); /* diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index b73968b2b8b..3606b7098fc 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -183,6 +183,35 @@ lpfc_ramp_up_queue_handler(struct lpfc_hba *phba) atomic_set(&phba->num_cmd_success, 0); } +/** + * lpfc_scsi_dev_block: set all scsi hosts to block state. + * @phba: Pointer to HBA context object. + * + * This function walks vport list and set each SCSI host to block state + * by invoking fc_remote_port_delete() routine. This function is invoked + * with EEH when device's PCI slot has been permanently disabled. + **/ +void +lpfc_scsi_dev_block(struct lpfc_hba *phba) +{ + struct lpfc_vport **vports; + struct Scsi_Host *shost; + struct scsi_device *sdev; + struct fc_rport *rport; + int i; + + vports = lpfc_create_vport_work_array(phba); + if (vports != NULL) + for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) { + shost = lpfc_shost_from_vport(vports[i]); + shost_for_each_device(sdev, shost) { + rport = starget_to_rport(scsi_target(sdev)); + fc_remote_port_delete(rport); + } + } + lpfc_destroy_vport_work_array(phba, vports); +} + /* * This routine allocates a scsi buffer, which contains all the necessary * information needed to initiate a SCSI I/O. The non-DMAable buffer region diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 857bc0a57c4..1812e18246d 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -2376,6 +2376,70 @@ lpfc_sli_abort_iocb_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) } } +/** + * lpfc_sli_flush_fcp_rings: flush all iocbs in the fcp ring. + * @phba: Pointer to HBA context object. + * + * This function flushes all iocbs in the fcp ring and frees all the iocb + * objects in txq and txcmplq. This function will not issue abort iocbs + * for all the iocb commands in txcmplq, they will just be returned with + * IOERR_SLI_DOWN. This function is invoked with EEH when device's PCI + * slot has been permanently disabled. + **/ +void +lpfc_sli_flush_fcp_rings(struct lpfc_hba *phba) +{ + LIST_HEAD(txq); + LIST_HEAD(txcmplq); + struct lpfc_iocbq *iocb; + IOCB_t *cmd = NULL; + struct lpfc_sli *psli = &phba->sli; + struct lpfc_sli_ring *pring; + + /* Currently, only one fcp ring */ + pring = &psli->ring[psli->fcp_ring]; + + spin_lock_irq(&phba->hbalock); + /* Retrieve everything on txq */ + list_splice_init(&pring->txq, &txq); + pring->txq_cnt = 0; + + /* Retrieve everything on the txcmplq */ + list_splice_init(&pring->txcmplq, &txcmplq); + pring->txcmplq_cnt = 0; + spin_unlock_irq(&phba->hbalock); + + /* Flush the txq */ + while (!list_empty(&txq)) { + iocb = list_get_first(&txq, struct lpfc_iocbq, list); + cmd = &iocb->iocb; + list_del_init(&iocb->list); + + if (!iocb->iocb_cmpl) + lpfc_sli_release_iocbq(phba, iocb); + else { + cmd->ulpStatus = IOSTAT_LOCAL_REJECT; + cmd->un.ulpWord[4] = IOERR_SLI_DOWN; + (iocb->iocb_cmpl) (phba, iocb, iocb); + } + } + + /* Flush the txcmpq */ + while (!list_empty(&txcmplq)) { + iocb = list_get_first(&txcmplq, struct lpfc_iocbq, list); + cmd = &iocb->iocb; + list_del_init(&iocb->list); + + if (!iocb->iocb_cmpl) + lpfc_sli_release_iocbq(phba, iocb); + else { + cmd->ulpStatus = IOSTAT_LOCAL_REJECT; + cmd->un.ulpWord[4] = IOERR_SLI_DOWN; + (iocb->iocb_cmpl) (phba, iocb, iocb); + } + } +} + /** * lpfc_sli_brdready: Check for host status bits. * @phba: Pointer to HBA context object. -- cgit v1.2.3 From 0f1f53a7efd60d7cdd8e82925f0c62dcf64ba092 Mon Sep 17 00:00:00 2001 From: James Smart Date: Sun, 24 Aug 2008 21:50:18 -0400 Subject: [SCSI] lpfc 8.2.8 : Update driver to use new Host byte error code DID_TRANSPORT_DISRUPTED [jejb: drop rejecting hunk altered by target busy patches] Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_scsi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 3606b7098fc..5dae4d30675 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -653,7 +653,7 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, break; case IOSTAT_NPORT_BSY: case IOSTAT_FABRIC_BSY: - cmd->result = ScsiResult(DID_BUS_BUSY, 0); + cmd->result = ScsiResult(DID_TRANSPORT_DISRUPTED, 0); break; case IOSTAT_LOCAL_REJECT: if (lpfc_cmd->result == IOERR_INVALID_RPI || @@ -669,7 +669,8 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, if (!pnode || !NLP_CHK_NODE_ACT(pnode) || (pnode->nlp_state != NLP_STE_MAPPED_NODE)) - cmd->result = ScsiResult(DID_BUS_BUSY, SAM_STAT_BUSY); + cmd->result = ScsiResult(DID_TRANSPORT_DISRUPTED, + SAM_STAT_BUSY); } else { cmd->result = ScsiResult(DID_OK, 0); } -- cgit v1.2.3 From 9399627f340794baebf7e4581470ccb92f019acc Mon Sep 17 00:00:00 2001 From: James Smart Date: Sun, 24 Aug 2008 21:50:30 -0400 Subject: [SCSI] lpfc 8.2.8 : Add MSI-X support Add support for MSI-X Multi-Message interrupts. We use different vectors for fast-path interrupts (i/o) and slow-patch interrupts (discovery, etc). Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc.h | 35 +++- drivers/scsi/lpfc/lpfc_attr.c | 8 +- drivers/scsi/lpfc/lpfc_crtn.h | 43 +++-- drivers/scsi/lpfc/lpfc_hbadisc.c | 2 + drivers/scsi/lpfc/lpfc_hw.h | 63 +++++- drivers/scsi/lpfc/lpfc_init.c | 230 +++++++++++++++++----- drivers/scsi/lpfc/lpfc_mbox.c | 80 +++++++- drivers/scsi/lpfc/lpfc_sli.c | 401 ++++++++++++++++++++++++++++++--------- drivers/scsi/lpfc/lpfc_version.h | 4 +- 9 files changed, 699 insertions(+), 167 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index aee5444b63d..18153846611 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -49,6 +49,9 @@ struct lpfc_sli2_slim; #define LPFC_HB_MBOX_INTERVAL 5 /* Heart beat interval in seconds. */ #define LPFC_HB_MBOX_TIMEOUT 30 /* Heart beat timeout in seconds. */ +/* Error Attention event polling interval */ +#define LPFC_ERATT_POLL_INTERVAL 5 /* EATT poll interval in seconds */ + /* Define macros for 64 bit support */ #define putPaddrLow(addr) ((uint32_t) (0xffffffff & (u64)(addr))) #define putPaddrHigh(addr) ((uint32_t) (0xffffffff & (((u64)(addr))>>32))) @@ -60,6 +63,9 @@ struct lpfc_sli2_slim; #define MAX_HBAEVT 32 +/* Number of MSI-X vectors the driver uses */ +#define LPFC_MSIX_VECTORS 2 + /* lpfc wait event data ready flag */ #define LPFC_DATA_READY (1<<0) @@ -423,12 +429,16 @@ struct lpfc_hba { #define LS_NPIV_FAB_SUPPORTED 0x2 /* Fabric supports NPIV */ #define LS_IGNORE_ERATT 0x4 /* intr handler should ignore ERATT */ + uint32_t hba_flag; /* hba generic flags */ +#define HBA_ERATT_HANDLED 0x1 /* This flag is set when eratt handled */ + struct lpfc_dmabuf slim2p; MAILBOX_t *mbox; uint32_t *inb_ha_copy; uint32_t *inb_counter; uint32_t inb_last_counter; + uint32_t ha_copy; struct _PCB *pcb; struct _IOCB *IOCBs; @@ -544,6 +554,7 @@ struct lpfc_hba { uint8_t soft_wwn_enable; struct timer_list fcp_poll_timer; + struct timer_list eratt_poll; /* * stat counters @@ -573,7 +584,7 @@ struct lpfc_hba { struct fc_host_statistics link_stats; enum intr_type_t intr_type; - struct msix_entry msix_entries[1]; + struct msix_entry msix_entries[LPFC_MSIX_VECTORS]; struct list_head port_list; struct lpfc_vport *pport; /* physical lpfc_vport pointer */ @@ -660,6 +671,28 @@ lpfc_worker_wake_up(struct lpfc_hba *phba) return; } +static inline void +lpfc_sli_read_hs(struct lpfc_hba *phba) +{ + /* + * There was a link/board error. Read the status register to retrieve + * the error event and process it. + */ + phba->sli.slistat.err_attn_event++; + + /* Save status info */ + phba->work_hs = readl(phba->HSregaddr); + phba->work_status[0] = readl(phba->MBslimaddr + 0xa8); + phba->work_status[1] = readl(phba->MBslimaddr + 0xac); + + /* Clear chip Host Attention error bit */ + writel(HA_ERATT, phba->HAregaddr); + readl(phba->HAregaddr); /* flush */ + phba->pport->stopped = 1; + + return; +} + #define FC_REG_DUMP_EVENT 0x10 /* Register for Dump events */ #define FC_REG_TEMPERATURE_EVENT 0x20 /* Register for temperature event */ diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index b9acc6eefe6..21397f37010 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -2372,12 +2372,12 @@ LPFC_ATTR_RW(poll_tmo, 10, 1, 255, /* # lpfc_use_msi: Use MSI (Message Signaled Interrupts) in systems that # support this feature -# 0 = MSI disabled (default) +# 0 = MSI disabled # 1 = MSI enabled -# 2 = MSI-X enabled -# Value range is [0,2]. Default value is 0. +# 2 = MSI-X enabled (default) +# Value range is [0,2]. Default value is 2. */ -LPFC_ATTR_R(use_msi, 0, 0, 2, "Use Message Signaled Interrupts (1) or " +LPFC_ATTR_R(use_msi, 2, 0, 2, "Use Message Signaled Interrupts (1) or " "MSI-X (2), if possible"); /* diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index 495afd06936..7d173f4a37f 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -18,7 +18,7 @@ * included with this package. * *******************************************************************/ -typedef int (*node_filter)(struct lpfc_nodelist *ndlp, void *param); +typedef int (*node_filter)(struct lpfc_nodelist *, void *); struct fc_rport; void lpfc_dump_mem(struct lpfc_hba *, LPFC_MBOXQ_t *, uint16_t); @@ -26,11 +26,11 @@ void lpfc_read_nv(struct lpfc_hba *, LPFC_MBOXQ_t *); void lpfc_config_async(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t); void lpfc_heart_beat(struct lpfc_hba *, LPFC_MBOXQ_t *); -int lpfc_read_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, - struct lpfc_dmabuf *mp); +int lpfc_read_la(struct lpfc_hba *, LPFC_MBOXQ_t *, struct lpfc_dmabuf *); void lpfc_clear_la(struct lpfc_hba *, LPFC_MBOXQ_t *); -void lpfc_issue_clear_la(struct lpfc_hba *phba, struct lpfc_vport *vport); +void lpfc_issue_clear_la(struct lpfc_hba *, struct lpfc_vport *); void lpfc_config_link(struct lpfc_hba *, LPFC_MBOXQ_t *); +int lpfc_config_msi(struct lpfc_hba *, LPFC_MBOXQ_t *); int lpfc_read_sparam(struct lpfc_hba *, LPFC_MBOXQ_t *, int); void lpfc_read_config(struct lpfc_hba *, LPFC_MBOXQ_t *); void lpfc_read_lnk_stat(struct lpfc_hba *, LPFC_MBOXQ_t *); @@ -43,7 +43,7 @@ void lpfc_unreg_vpi(struct lpfc_hba *, uint16_t, LPFC_MBOXQ_t *); void lpfc_init_link(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t, uint32_t); struct lpfc_vport *lpfc_find_vport_by_did(struct lpfc_hba *, uint32_t); -void lpfc_cleanup_rpis(struct lpfc_vport *vport, int remove); +void lpfc_cleanup_rpis(struct lpfc_vport *, int); int lpfc_linkdown(struct lpfc_hba *); void lpfc_port_link_failure(struct lpfc_vport *); void lpfc_mbx_cmpl_read_la(struct lpfc_hba *, LPFC_MBOXQ_t *); @@ -135,7 +135,7 @@ void lpfc_ct_unsol_event(struct lpfc_hba *, struct lpfc_sli_ring *, int lpfc_ns_cmd(struct lpfc_vport *, int, uint8_t, uint32_t); int lpfc_fdmi_cmd(struct lpfc_vport *, struct lpfc_nodelist *, int); void lpfc_fdmi_tmo(unsigned long); -void lpfc_fdmi_timeout_handler(struct lpfc_vport *vport); +void lpfc_fdmi_timeout_handler(struct lpfc_vport *); int lpfc_config_port_prep(struct lpfc_hba *); int lpfc_config_port_post(struct lpfc_hba *); @@ -155,6 +155,8 @@ int lpfc_sli_queue_setup(struct lpfc_hba *); void lpfc_handle_eratt(struct lpfc_hba *); void lpfc_handle_latt(struct lpfc_hba *); irqreturn_t lpfc_intr_handler(int, void *); +irqreturn_t lpfc_sp_intr_handler(int, void *); +irqreturn_t lpfc_fp_intr_handler(int, void *); void lpfc_read_rev(struct lpfc_hba *, LPFC_MBOXQ_t *); void lpfc_config_ring(struct lpfc_hba *, int, LPFC_MBOXQ_t *); @@ -175,11 +177,12 @@ void lpfc_mem_free(struct lpfc_hba *); void lpfc_stop_vport_timers(struct lpfc_vport *); void lpfc_poll_timeout(unsigned long ptr); -void lpfc_poll_start_timer(struct lpfc_hba * phba); -void lpfc_sli_poll_fcp_ring(struct lpfc_hba * hba); +void lpfc_poll_start_timer(struct lpfc_hba *); +void lpfc_poll_eratt(unsigned long); +void lpfc_sli_poll_fcp_ring(struct lpfc_hba *); struct lpfc_iocbq * lpfc_sli_get_iocbq(struct lpfc_hba *); -void lpfc_sli_release_iocbq(struct lpfc_hba * phba, struct lpfc_iocbq * iocb); -uint16_t lpfc_sli_next_iotag(struct lpfc_hba * phba, struct lpfc_iocbq * iocb); +void lpfc_sli_release_iocbq(struct lpfc_hba *, struct lpfc_iocbq *); +uint16_t lpfc_sli_next_iotag(struct lpfc_hba *, struct lpfc_iocbq *); void lpfc_reset_barrier(struct lpfc_hba * phba); int lpfc_sli_brdready(struct lpfc_hba *, uint32_t); @@ -187,11 +190,13 @@ int lpfc_sli_brdkill(struct lpfc_hba *); int lpfc_sli_brdreset(struct lpfc_hba *); int lpfc_sli_brdrestart(struct lpfc_hba *); int lpfc_sli_hba_setup(struct lpfc_hba *); +int lpfc_sli_config_port(struct lpfc_hba *, int); int lpfc_sli_host_down(struct lpfc_vport *); int lpfc_sli_hba_down(struct lpfc_hba *); int lpfc_sli_issue_mbox(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t); int lpfc_sli_handle_mb_event(struct lpfc_hba *); int lpfc_sli_flush_mbox_queue(struct lpfc_hba *); +int lpfc_sli_check_eratt(struct lpfc_hba *); int lpfc_sli_handle_slow_ring_event(struct lpfc_hba *, struct lpfc_sli_ring *, uint32_t); void lpfc_sli_def_mbox_cmpl(struct lpfc_hba *, LPFC_MBOXQ_t *); @@ -227,17 +232,13 @@ struct lpfc_nodelist *lpfc_findnode_did(struct lpfc_vport *, uint32_t); struct lpfc_nodelist *lpfc_findnode_wwpn(struct lpfc_vport *, struct lpfc_name *); -int lpfc_sli_issue_mbox_wait(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq, - uint32_t timeout); - -int lpfc_sli_issue_iocb_wait(struct lpfc_hba * phba, - struct lpfc_sli_ring * pring, - struct lpfc_iocbq * piocb, - struct lpfc_iocbq * prspiocbq, - uint32_t timeout); -void lpfc_sli_abort_fcp_cmpl(struct lpfc_hba * phba, - struct lpfc_iocbq * cmdiocb, - struct lpfc_iocbq * rspiocb); +int lpfc_sli_issue_mbox_wait(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t); + +int lpfc_sli_issue_iocb_wait(struct lpfc_hba *, struct lpfc_sli_ring *, + struct lpfc_iocbq *, struct lpfc_iocbq *, + uint32_t); +void lpfc_sli_abort_fcp_cmpl(struct lpfc_hba *, struct lpfc_iocbq *, + struct lpfc_iocbq *); void lpfc_sli_free_hbq(struct lpfc_hba *, struct hbq_dmabuf *); diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 897ef7d7a8e..3b00d9b86c7 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -369,6 +369,7 @@ lpfc_work_done(struct lpfc_hba *phba) spin_unlock_irq(&phba->hbalock); if (ha_copy & HA_ERATT) + /* Handle the error attention event */ lpfc_handle_eratt(phba); if (ha_copy & HA_MBATT) @@ -376,6 +377,7 @@ lpfc_work_done(struct lpfc_hba *phba) if (ha_copy & HA_LATT) lpfc_handle_latt(phba); + vports = lpfc_create_vport_work_array(phba); if (vports != NULL) for(i = 0; i <= phba->max_vpi; i++) { diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h index ee4e50175ca..5de5dabbbee 100644 --- a/drivers/scsi/lpfc/lpfc_hw.h +++ b/drivers/scsi/lpfc/lpfc_hw.h @@ -1203,6 +1203,18 @@ typedef struct { /* FireFly BIU registers */ #define HA_RXATT 0x00000008 /* Bit 3 */ #define HA_RXMASK 0x0000000f +#define HA_R0_CLR_MSK (HA_R0RE_REQ | HA_R0CE_RSP | HA_R0ATT) +#define HA_R1_CLR_MSK (HA_R1RE_REQ | HA_R1CE_RSP | HA_R1ATT) +#define HA_R2_CLR_MSK (HA_R2RE_REQ | HA_R2CE_RSP | HA_R2ATT) +#define HA_R3_CLR_MSK (HA_R3RE_REQ | HA_R3CE_RSP | HA_R3ATT) + +#define HA_R0_POS 3 +#define HA_R1_POS 7 +#define HA_R2_POS 11 +#define HA_R3_POS 15 +#define HA_LE_POS 29 +#define HA_MB_POS 30 +#define HA_ER_POS 31 /* Chip Attention Register */ #define CA_REG_OFFSET 4 /* Byte offset from register base address */ @@ -1240,7 +1252,7 @@ typedef struct { /* FireFly BIU registers */ /* Host Control Register */ -#define HC_REG_OFFSET 12 /* Word offset from register base address */ +#define HC_REG_OFFSET 12 /* Byte offset from register base address */ #define HC_MBINT_ENA 0x00000001 /* Bit 0 */ #define HC_R0INT_ENA 0x00000002 /* Bit 1 */ @@ -1253,6 +1265,19 @@ typedef struct { /* FireFly BIU registers */ #define HC_LAINT_ENA 0x20000000 /* Bit 29 */ #define HC_ERINT_ENA 0x80000000 /* Bit 31 */ +/* Message Signaled Interrupt eXtension (MSI-X) message identifiers */ +#define MSIX_DFLT_ID 0 +#define MSIX_RNG0_ID 0 +#define MSIX_RNG1_ID 1 +#define MSIX_RNG2_ID 2 +#define MSIX_RNG3_ID 3 + +#define MSIX_LINK_ID 4 +#define MSIX_MBOX_ID 5 + +#define MSIX_SPARE0_ID 6 +#define MSIX_SPARE1_ID 7 + /* Mailbox Commands */ #define MBX_SHUTDOWN 0x00 /* terminate testing */ #define MBX_LOAD_SM 0x01 @@ -1290,6 +1315,7 @@ typedef struct { /* FireFly BIU registers */ #define MBX_KILL_BOARD 0x24 #define MBX_CONFIG_FARP 0x25 #define MBX_BEACON 0x2A +#define MBX_CONFIG_MSI 0x30 #define MBX_HEARTBEAT 0x31 #define MBX_WRITE_VPARMS 0x32 #define MBX_ASYNCEVT_ENABLE 0x33 @@ -2599,6 +2625,40 @@ typedef struct { } CONFIG_PORT_VAR; +/* Structure for MB Command CONFIG_MSI (0x30) */ +struct config_msi_var { +#ifdef __BIG_ENDIAN_BITFIELD + uint32_t dfltMsgNum:8; /* Default message number */ + uint32_t rsvd1:11; /* Reserved */ + uint32_t NID:5; /* Number of secondary attention IDs */ + uint32_t rsvd2:5; /* Reserved */ + uint32_t dfltPresent:1; /* Default message number present */ + uint32_t addFlag:1; /* Add association flag */ + uint32_t reportFlag:1; /* Report association flag */ +#else /* __LITTLE_ENDIAN_BITFIELD */ + uint32_t reportFlag:1; /* Report association flag */ + uint32_t addFlag:1; /* Add association flag */ + uint32_t dfltPresent:1; /* Default message number present */ + uint32_t rsvd2:5; /* Reserved */ + uint32_t NID:5; /* Number of secondary attention IDs */ + uint32_t rsvd1:11; /* Reserved */ + uint32_t dfltMsgNum:8; /* Default message number */ +#endif + uint32_t attentionConditions[2]; + uint8_t attentionId[16]; + uint8_t messageNumberByHA[64]; + uint8_t messageNumberByID[16]; + uint32_t autoClearHA[2]; +#ifdef __BIG_ENDIAN_BITFIELD + uint32_t rsvd3:16; + uint32_t autoClearID:16; +#else /* __LITTLE_ENDIAN_BITFIELD */ + uint32_t autoClearID:16; + uint32_t rsvd3:16; +#endif + uint32_t rsvd4; +}; + /* SLI-2 Port Control Block */ /* SLIM POINTER */ @@ -2722,6 +2782,7 @@ typedef union { REG_VPI_VAR varRegVpi; /* cmd = 0x96 (REG_VPI) */ UNREG_VPI_VAR varUnregVpi; /* cmd = 0x97 (UNREG_VPI) */ ASYNCEVT_ENABLE_VAR varCfgAsyncEvent; /*cmd = x33 (CONFIG_ASYNC) */ + struct config_msi_var varCfgMSI;/* cmd = x30 (CONFIG_MSI) */ } MAILVARIANTS; /* diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 333166b1790..49577d5f130 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -389,6 +389,29 @@ lpfc_config_port_post(struct lpfc_hba *phba) if (phba->sli_rev != 3) lpfc_post_rcv_buf(phba); + /* + * Configure HBA MSI-X attention conditions to messages if MSI-X mode + */ + if (phba->intr_type == MSIX) { + rc = lpfc_config_msi(phba, pmb); + if (rc) { + mempool_free(pmb, phba->mbox_mem_pool); + return -EIO; + } + rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL); + if (rc != MBX_SUCCESS) { + lpfc_printf_log(phba, KERN_ERR, LOG_MBOX, + "0352 Config MSI mailbox command " + "failed, mbxCmd x%x, mbxStatus x%x\n", + pmb->mb.mbxCommand, pmb->mb.mbxStatus); + mempool_free(pmb, phba->mbox_mem_pool); + return -EIO; + } + } + + /* Initialize ERATT handling flag */ + phba->hba_flag &= ~HBA_ERATT_HANDLED; + /* Enable appropriate host interrupts */ spin_lock_irq(&phba->hbalock); status = readl(phba->HCregaddr); @@ -404,20 +427,21 @@ lpfc_config_port_post(struct lpfc_hba *phba) if ((phba->cfg_poll & ENABLE_FCP_RING_POLLING) && (phba->cfg_poll & DISABLE_FCP_RING_INT)) - status &= ~(HC_R0INT_ENA << LPFC_FCP_RING); + status &= ~(HC_R0INT_ENA); writel(status, phba->HCregaddr); readl(phba->HCregaddr); /* flush */ spin_unlock_irq(&phba->hbalock); - /* - * Setup the ring 0 (els) timeout handler - */ - timeout = phba->fc_ratov << 1; + /* Set up ring-0 (ELS) timer */ + timeout = phba->fc_ratov * 2; mod_timer(&vport->els_tmofunc, jiffies + HZ * timeout); + /* Set up heart beat (HB) timer */ mod_timer(&phba->hb_tmofunc, jiffies + HZ * LPFC_HB_MBOX_INTERVAL); phba->hb_outstanding = 0; phba->last_completion_time = jiffies; + /* Set up error attention (ERATT) polling timer */ + mod_timer(&phba->eratt_poll, jiffies + HZ * LPFC_ERATT_POLL_INTERVAL); lpfc_init_link(phba, pmb, phba->cfg_topology, phba->cfg_link_speed); pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; @@ -581,12 +605,15 @@ lpfc_hb_timeout(unsigned long ptr) unsigned long iflag; phba = (struct lpfc_hba *)ptr; + + /* Check for heart beat timeout conditions */ spin_lock_irqsave(&phba->pport->work_port_lock, iflag); tmo_posted = phba->pport->work_port_events & WORKER_HB_TMO; if (!tmo_posted) phba->pport->work_port_events |= WORKER_HB_TMO; spin_unlock_irqrestore(&phba->pport->work_port_lock, iflag); + /* Tell the worker thread there is work to do */ if (!tmo_posted) lpfc_worker_wake_up(phba); return; @@ -617,6 +644,7 @@ lpfc_hb_mbox_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq) phba->hb_outstanding = 0; spin_unlock_irqrestore(&phba->hbalock, drvr_flag); + /* Check and reset heart-beat timer is necessary */ mempool_free(pmboxq, phba->mbox_mem_pool); if (!(phba->pport->fc_flag & FC_OFFLINE_MODE) && !(phba->link_state == LPFC_HBA_ERROR) && @@ -856,8 +884,8 @@ lpfc_handle_eratt(struct lpfc_hba *phba) } else { /* The if clause above forces this code path when the status - * failure is a value other than FFER6. Do not call the offline - * twice. This is the adapter hardware error path. + * failure is a value other than FFER6. Do not call the offline + * twice. This is the adapter hardware error path. */ lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0457 Adapter Hardware Error " @@ -873,6 +901,7 @@ lpfc_handle_eratt(struct lpfc_hba *phba) lpfc_offline_eratt(phba); } + return; } /** @@ -1656,6 +1685,7 @@ lpfc_stop_phba_timers(struct lpfc_hba *phba) del_timer_sync(&phba->fabric_block_timer); phba->hb_outstanding = 0; del_timer_sync(&phba->hb_tmofunc); + del_timer_sync(&phba->eratt_poll); return; } @@ -2172,30 +2202,97 @@ void lpfc_host_attrib_init(struct Scsi_Host *shost) static int lpfc_enable_msix(struct lpfc_hba *phba) { - int error; + int rc, i; + LPFC_MBOXQ_t *pmb; - phba->msix_entries[0].entry = 0; - phba->msix_entries[0].vector = 0; + /* Set up MSI-X multi-message vectors */ + for (i = 0; i < LPFC_MSIX_VECTORS; i++) + phba->msix_entries[i].entry = i; - error = pci_enable_msix(phba->pcidev, phba->msix_entries, + /* Configure MSI-X capability structure */ + rc = pci_enable_msix(phba->pcidev, phba->msix_entries, ARRAY_SIZE(phba->msix_entries)); - if (error) { + if (rc) { lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "0420 Enable MSI-X failed (%d), continuing " - "with MSI\n", error); - pci_disable_msix(phba->pcidev); - return error; + "with MSI\n", rc); + goto msi_fail_out; + } else + for (i = 0; i < LPFC_MSIX_VECTORS; i++) + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "0477 MSI-X entry[%d]: vector=x%x " + "message=%d\n", i, + phba->msix_entries[i].vector, + phba->msix_entries[i].entry); + /* + * Assign MSI-X vectors to interrupt handlers + */ + + /* vector-0 is associated to slow-path handler */ + rc = request_irq(phba->msix_entries[0].vector, &lpfc_sp_intr_handler, + IRQF_SHARED, LPFC_SP_DRIVER_HANDLER_NAME, phba); + if (rc) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "0421 MSI-X slow-path request_irq failed " + "(%d), continuing with MSI\n", rc); + goto msi_fail_out; } - error = request_irq(phba->msix_entries[0].vector, lpfc_intr_handler, 0, - LPFC_DRIVER_NAME, phba); - if (error) { + /* vector-1 is associated to fast-path handler */ + rc = request_irq(phba->msix_entries[1].vector, &lpfc_fp_intr_handler, + IRQF_SHARED, LPFC_FP_DRIVER_HANDLER_NAME, phba); + + if (rc) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, - "0421 MSI-X request_irq failed (%d), " - "continuing with MSI\n", error); - pci_disable_msix(phba->pcidev); + "0429 MSI-X fast-path request_irq failed " + "(%d), continuing with MSI\n", rc); + goto irq_fail_out; } - return error; + + /* + * Configure HBA MSI-X attention conditions to messages + */ + pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + + if (!pmb) { + rc = -ENOMEM; + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "0474 Unable to allocate memory for issuing " + "MBOX_CONFIG_MSI command\n"); + goto mem_fail_out; + } + rc = lpfc_config_msi(phba, pmb); + if (rc) + goto mbx_fail_out; + rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL); + if (rc != MBX_SUCCESS) { + lpfc_printf_log(phba, KERN_ERR, LOG_MBOX, + "0351 Config MSI mailbox command failed, " + "mbxCmd x%x, mbxStatus x%x\n", + pmb->mb.mbxCommand, pmb->mb.mbxStatus); + goto mbx_fail_out; + } + + /* Free memory allocated for mailbox command */ + mempool_free(pmb, phba->mbox_mem_pool); + return rc; + +mbx_fail_out: + /* Free memory allocated for mailbox command */ + mempool_free(pmb, phba->mbox_mem_pool); + +mem_fail_out: + /* free the irq already requested */ + free_irq(phba->msix_entries[1].vector, phba); + +irq_fail_out: + /* free the irq already requested */ + free_irq(phba->msix_entries[0].vector, phba); + +msi_fail_out: + /* Unconfigure MSI-X capability structure */ + pci_disable_msix(phba->pcidev); + return rc; } /** @@ -2208,7 +2305,12 @@ lpfc_enable_msix(struct lpfc_hba *phba) static void lpfc_disable_msix(struct lpfc_hba *phba) { - free_irq(phba->msix_entries[0].vector, phba); + int i; + + /* Free up MSI-X multi-message vectors */ + for (i = 0; i < LPFC_MSIX_VECTORS; i++) + free_irq(phba->msix_entries[i].vector, phba); + /* Disable MSI-X */ pci_disable_msix(phba->pcidev); } @@ -2288,6 +2390,9 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) init_timer(&phba->fabric_block_timer); phba->fabric_block_timer.function = lpfc_fabric_block_timeout; phba->fabric_block_timer.data = (unsigned long) phba; + init_timer(&phba->eratt_poll); + phba->eratt_poll.function = lpfc_poll_eratt; + phba->eratt_poll.data = (unsigned long) phba; pci_set_master(pdev); pci_try_set_mwi(pdev); @@ -2307,7 +2412,7 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) bar2map_len = pci_resource_len(phba->pcidev, 2); /* Map HBA SLIM to a kernel virtual address. */ - phba->slim_memmap_p = ioremap(phba->pci_bar0_map, bar0map_len); + phba->slim_memmap_p = ioremap(phba->pci_bar0_map, bar0map_len); if (!phba->slim_memmap_p) { error = -ENODEV; dev_printk(KERN_ERR, &pdev->dev, @@ -2405,7 +2510,7 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) phba->fc_arbtov = FF_DEF_ARBTOV; INIT_LIST_HEAD(&phba->work_list); - phba->work_ha_mask = (HA_ERATT|HA_MBATT|HA_LATT); + phba->work_ha_mask = (HA_ERATT | HA_MBATT | HA_LATT); phba->work_ha_mask |= (HA_RXMASK << (LPFC_ELS_RING * 4)); /* Initialize the wait queue head for the kernel thread */ @@ -2440,21 +2545,42 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) pci_set_drvdata(pdev, shost); phba->intr_type = NONE; + phba->MBslimaddr = phba->slim_memmap_p; + phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET; + phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET; + phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET; + phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET; + + /* Configure and enable interrupt */ if (phba->cfg_use_msi == 2) { - error = lpfc_enable_msix(phba); - if (!error) - phba->intr_type = MSIX; + /* Need to issue conf_port mbox cmd before conf_msi mbox cmd */ + error = lpfc_sli_config_port(phba, 3); + if (error) + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "0427 Firmware not capable of SLI 3 mode.\n"); + else { + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "0426 Firmware capable of SLI 3 mode.\n"); + /* Now, try to enable MSI-X interrupt mode */ + error = lpfc_enable_msix(phba); + if (!error) { + phba->intr_type = MSIX; + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "0430 enable MSI-X mode.\n"); + } + } } /* Fallback to MSI if MSI-X initialization failed */ if (phba->cfg_use_msi >= 1 && phba->intr_type == NONE) { retval = pci_enable_msi(phba->pcidev); - if (!retval) + if (!retval) { phba->intr_type = MSI; - else lpfc_printf_log(phba, KERN_INFO, LOG_INIT, - "0452 Enable MSI failed, continuing " - "with IRQ\n"); + "0473 enable MSI mode.\n"); + } else + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "0452 enable IRQ mode.\n"); } /* MSI-X is the only case the doesn't need to call request_irq */ @@ -2470,18 +2596,16 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) phba->intr_type = INTx; } - phba->MBslimaddr = phba->slim_memmap_p; - phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET; - phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET; - phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET; - phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET; - if (lpfc_alloc_sysfs_attr(vport)) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "1476 Failed to allocate sysfs attr\n"); error = -ENOMEM; goto out_free_irq; } if (lpfc_sli_hba_setup(phba)) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "1477 Failed to set up hba\n"); error = -ENODEV; goto out_remove_device; } @@ -2500,6 +2624,8 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) spin_unlock_irq(shost->host_lock); } + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "0428 Perform SCSI scan\n"); scsi_scan_host(shost); return 0; @@ -2732,20 +2858,34 @@ static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev) /* Enable configured interrupt method */ phba->intr_type = NONE; if (phba->cfg_use_msi == 2) { - error = lpfc_enable_msix(phba); - if (!error) - phba->intr_type = MSIX; + /* Need to issue conf_port mbox cmd before conf_msi mbox cmd */ + error = lpfc_sli_config_port(phba, 3); + if (error) + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "0478 Firmware not capable of SLI 3 mode.\n"); + else { + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "0479 Firmware capable of SLI 3 mode.\n"); + /* Now, try to enable MSI-X interrupt mode */ + error = lpfc_enable_msix(phba); + if (!error) { + phba->intr_type = MSIX; + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "0480 enable MSI-X mode.\n"); + } + } } /* Fallback to MSI if MSI-X initialization failed */ if (phba->cfg_use_msi >= 1 && phba->intr_type == NONE) { retval = pci_enable_msi(phba->pcidev); - if (!retval) + if (!retval) { phba->intr_type = MSI; - else lpfc_printf_log(phba, KERN_INFO, LOG_INIT, - "0470 Enable MSI failed, continuing " - "with IRQ\n"); + "0481 enable MSI mode.\n"); + } else + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "0470 enable IRQ mode.\n"); } /* MSI-X is the only case the doesn't need to call request_irq */ diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c index ca358355ec9..65bc8e1a5f7 100644 --- a/drivers/scsi/lpfc/lpfc_mbox.c +++ b/drivers/scsi/lpfc/lpfc_mbox.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2007 Emulex. All rights reserved. * + * Copyright (C) 2004-2008 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * @@ -271,6 +271,84 @@ lpfc_config_link(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) return; } +/** + * lpfc_config_msi: Prepare a mailbox command for configuring msi-x. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * The configure MSI-X mailbox command is used to configure the HBA's SLI-3 + * MSI-X multi-message interrupt vector association to interrupt attention + * conditions. + * + * Return codes + * 0 - Success + * -EINVAL - Failure + **/ +int +lpfc_config_msi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) +{ + MAILBOX_t *mb = &pmb->mb; + uint32_t attentionConditions[2]; + + /* Sanity check */ + if (phba->cfg_use_msi != 2) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "0475 Not configured for supporting MSI-X " + "cfg_use_msi: 0x%x\n", phba->cfg_use_msi); + return -EINVAL; + } + + if (phba->sli_rev < 3) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "0476 HBA not supporting SLI-3 or later " + "SLI Revision: 0x%x\n", phba->sli_rev); + return -EINVAL; + } + + /* Clear mailbox command fields */ + memset(pmb, 0, sizeof(LPFC_MBOXQ_t)); + + /* + * SLI-3, Message Signaled Interrupt Fearure. + */ + + /* Multi-message attention configuration */ + attentionConditions[0] = (HA_R0ATT | HA_R1ATT | HA_R2ATT | HA_ERATT | + HA_LATT | HA_MBATT); + attentionConditions[1] = 0; + + mb->un.varCfgMSI.attentionConditions[0] = attentionConditions[0]; + mb->un.varCfgMSI.attentionConditions[1] = attentionConditions[1]; + + /* + * Set up message number to HA bit association + */ +#ifdef __BIG_ENDIAN_BITFIELD + /* RA0 (FCP Ring) */ + mb->un.varCfgMSI.messageNumberByHA[HA_R0_POS] = 1; + /* RA1 (Other Protocol Extra Ring) */ + mb->un.varCfgMSI.messageNumberByHA[HA_R1_POS] = 1; +#else /* __LITTLE_ENDIAN_BITFIELD */ + /* RA0 (FCP Ring) */ + mb->un.varCfgMSI.messageNumberByHA[HA_R0_POS^3] = 1; + /* RA1 (Other Protocol Extra Ring) */ + mb->un.varCfgMSI.messageNumberByHA[HA_R1_POS^3] = 1; +#endif + /* Multi-message interrupt autoclear configuration*/ + mb->un.varCfgMSI.autoClearHA[0] = attentionConditions[0]; + mb->un.varCfgMSI.autoClearHA[1] = attentionConditions[1]; + + /* For now, HBA autoclear does not work reliably, disable it */ + mb->un.varCfgMSI.autoClearHA[0] = 0; + mb->un.varCfgMSI.autoClearHA[1] = 0; + + /* Set command and owner bit */ + mb->mbxCommand = MBX_CONFIG_MSI; + mb->mbxOwner = OWN_HOST; + + return 0; +} + /** * lpfc_init_link: Prepare a mailbox command for initialize link on a HBA. * @phba: pointer to lpfc hba data structure. diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 1812e18246d..2cca39e9b93 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -1698,6 +1698,36 @@ lpfc_sli_rsp_pointers_error(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) return; } +/** + * lpfc_poll_eratt: Error attention polling timer timeout handler. + * @ptr: Pointer to address of HBA context object. + * + * This function is invoked by the Error Attention polling timer when the + * timer times out. It will check the SLI Error Attention register for + * possible attention events. If so, it will post an Error Attention event + * and wake up worker thread to process it. Otherwise, it will set up the + * Error Attention polling timer for the next poll. + **/ +void lpfc_poll_eratt(unsigned long ptr) +{ + struct lpfc_hba *phba; + uint32_t eratt = 0; + + phba = (struct lpfc_hba *)ptr; + + /* Check chip HA register for error event */ + eratt = lpfc_sli_check_eratt(phba); + + if (eratt) + /* Tell the worker thread there is work to do */ + lpfc_worker_wake_up(phba); + else + /* Restart the timer for next eratt poll */ + mod_timer(&phba->eratt_poll, jiffies + + HZ * LPFC_ERATT_POLL_INTERVAL); + return; +} + /** * lpfc_sli_poll_fcp_ring: Handle FCP ring completion in polling mode. * @phba: Pointer to HBA context object. @@ -3011,7 +3041,7 @@ lpfc_sli_hbq_setup(struct lpfc_hba *phba) } /** - * lpfc_do_config_port: Issue config port mailbox command. + * lpfc_sli_config_port: Issue config port mailbox command. * @phba: Pointer to HBA context object. * @sli_mode: sli mode - 2/3 * @@ -3023,8 +3053,8 @@ lpfc_sli_hbq_setup(struct lpfc_hba *phba) * The function returns 0 if successful, else returns negative error * code. **/ -static int -lpfc_do_config_port(struct lpfc_hba *phba, int sli_mode) +int +lpfc_sli_config_port(struct lpfc_hba *phba, int sli_mode) { LPFC_MBOXQ_t *pmb; uint32_t resetcount = 0, rc = 0, done = 0; @@ -3165,13 +3195,14 @@ lpfc_sli_hba_setup(struct lpfc_hba *phba) break; } - rc = lpfc_do_config_port(phba, mode); + rc = lpfc_sli_config_port(phba, mode); + if (rc && lpfc_sli_mode == 3) lpfc_printf_log(phba, KERN_ERR, LOG_INIT | LOG_VPORT, "1820 Unable to select SLI-3. " "Not supported by adapter.\n"); if (rc && mode != 2) - rc = lpfc_do_config_port(phba, 2); + rc = lpfc_sli_config_port(phba, 2); if (rc) goto lpfc_sli_hba_setup_error; @@ -3192,8 +3223,7 @@ lpfc_sli_hba_setup(struct lpfc_hba *phba) if (rc) goto lpfc_sli_hba_setup_error; - /* Init HBQs */ - + /* Init HBQs */ if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED) { rc = lpfc_sli_hbq_setup(phba); if (rc) @@ -5128,28 +5158,73 @@ lpfc_sli_flush_mbox_queue(struct lpfc_hba * phba) } /** - * lpfc_intr_handler: The interrupt handler of lpfc driver. + * lpfc_sli_check_eratt: check error attention events + * @phba: Pointer to HBA context. + * + * This function is called form timer soft interrupt context to check HBA's + * error attention register bit for error attention events. + * + * This fucntion returns 1 when there is Error Attention in the Host Attention + * Register and returns 0 otherwise. + **/ +int +lpfc_sli_check_eratt(struct lpfc_hba *phba) +{ + uint32_t ha_copy; + + /* If somebody is waiting to handle an eratt, don't process it + * here. The brdkill function will do this. + */ + if (phba->link_flag & LS_IGNORE_ERATT) + return 0; + + /* Check if interrupt handler handles this ERATT */ + spin_lock_irq(&phba->hbalock); + if (phba->hba_flag & HBA_ERATT_HANDLED) { + /* Interrupt handler has handled ERATT */ + spin_unlock_irq(&phba->hbalock); + return 0; + } + + /* Read chip Host Attention (HA) register */ + ha_copy = readl(phba->HAregaddr); + if (ha_copy & HA_ERATT) { + /* Read host status register to retrieve error event */ + lpfc_sli_read_hs(phba); + /* Set the driver HA work bitmap */ + phba->work_ha |= HA_ERATT; + /* Indicate polling handles this ERATT */ + phba->hba_flag |= HBA_ERATT_HANDLED; + spin_unlock_irq(&phba->hbalock); + return 1; + } + spin_unlock_irq(&phba->hbalock); + return 0; +} + +/** + * lpfc_sp_intr_handler: The slow-path interrupt handler of lpfc driver. * @irq: Interrupt number. * @dev_id: The device context pointer. * - * This function is called from the PCI layer when there is - * an event in the HBA which requires driver attention. When - * the PCI slot is in error recovery or the HBA is undergoing - * initialization the interrupt handler will not process the - * interrupt. - * The error attention, link attention and els ring attention - * events are handled by the worker thread. The interrupt - * handler signals the worker thread and returns for these - * events. - * The SCSI ring event and mailbox events are handled in the - * interrupt context. - * This function is called without any lock held. It gets the - * hbalock to access and update SLI data structures. - * This function returns IRQ_HANDLED when interrupt is handled - * else it returns IRQ_NONE. + * This function is directly called from the PCI layer as an interrupt + * service routine when the device is enabled with MSI-X multi-message + * interrupt mode and there are slow-path events in the HBA. However, + * when the device is enabled with either MSI or Pin-IRQ interrupt mode, + * this function is called as part of the device-level interrupt handler. + * When the PCI slot is in error recovery or the HBA is undergoing + * initialization, the interrupt handler will not process the interrupt. + * The link attention and ELS ring attention events are handled by the + * worker thread. The interrupt handler signals the worker thread and + * and returns for these events. This function is called without any + * lock held. It gets the hbalock to access and update SLI data + * structures. + * + * This function returns IRQ_HANDLED when interrupt is handled else it + * returns IRQ_NONE. **/ irqreturn_t -lpfc_intr_handler(int irq, void *dev_id) +lpfc_sp_intr_handler(int irq, void *dev_id) { struct lpfc_hba *phba; uint32_t ha_copy; @@ -5168,54 +5243,52 @@ lpfc_intr_handler(int irq, void *dev_id) * Get the driver's phba structure from the dev_id and * assume the HBA is not interrupting. */ - phba = (struct lpfc_hba *) dev_id; + phba = (struct lpfc_hba *)dev_id; if (unlikely(!phba)) return IRQ_NONE; - /* If the pci channel is offline, ignore all the interrupts. */ - if (unlikely(pci_channel_offline(phba->pcidev))) - return IRQ_NONE; - - phba->sli.slistat.sli_intr++; - /* - * Call the HBA to see if it is interrupting. If not, don't claim - * the interrupt + * Stuff needs to be attented to when this function is invoked as an + * individual interrupt handler in MSI-X multi-message interrupt mode */ - - /* Ignore all interrupts during initialization. */ - if (unlikely(phba->link_state < LPFC_LINK_DOWN)) - return IRQ_NONE; - - /* - * Read host attention register to determine interrupt source - * Clear Attention Sources, except Error Attention (to - * preserve status) and Link Attention - */ - spin_lock(&phba->hbalock); - if (phba->sli3_options & LPFC_SLI3_INB_ENABLED && - (phba->inb_last_counter != *phba->inb_counter)) { - phba->inb_last_counter = *phba->inb_counter; - ha_copy = le32_to_cpu(*phba->inb_ha_copy); - } else + if (phba->intr_type == MSIX) { + /* If the pci channel is offline, ignore all the interrupts */ + if (unlikely(pci_channel_offline(phba->pcidev))) + return IRQ_NONE; + /* Update device-level interrupt statistics */ + phba->sli.slistat.sli_intr++; + /* Ignore all interrupts during initialization. */ + if (unlikely(phba->link_state < LPFC_LINK_DOWN)) + return IRQ_NONE; + /* Need to read HA REG for slow-path events */ + spin_lock(&phba->hbalock); ha_copy = readl(phba->HAregaddr); - if (unlikely(!ha_copy)) { + /* If somebody is waiting to handle an eratt don't process it + * here. The brdkill function will do this. + */ + if (phba->link_flag & LS_IGNORE_ERATT) + ha_copy &= ~HA_ERATT; + /* Check the need for handling ERATT in interrupt handler */ + if (ha_copy & HA_ERATT) { + if (phba->hba_flag & HBA_ERATT_HANDLED) + /* ERATT polling has handled ERATT */ + ha_copy &= ~HA_ERATT; + else + /* Indicate interrupt handler handles ERATT */ + phba->hba_flag |= HBA_ERATT_HANDLED; + } + /* Clear up only attention source related to slow-path */ + writel((ha_copy & (HA_MBATT | HA_R2_CLR_MSK)), + phba->HAregaddr); + readl(phba->HAregaddr); /* flush */ spin_unlock(&phba->hbalock); - return IRQ_NONE; - } - /* If somebody is waiting to handle an eratt don't process it - * here. The brdkill function will do this. - */ - if (phba->link_flag & LS_IGNORE_ERATT) - ha_copy &= ~HA_ERATT; - writel((ha_copy & ~(HA_LATT | HA_ERATT)), phba->HAregaddr); - readl(phba->HAregaddr); /* flush */ - spin_unlock(&phba->hbalock); + } else + ha_copy = phba->ha_copy; work_ha_copy = ha_copy & phba->work_ha_mask; - if (unlikely(work_ha_copy)) { + if (work_ha_copy) { if (work_ha_copy & HA_LATT) { if (phba->sli.sli_flag & LPFC_PROCESS_LA) { /* @@ -5234,7 +5307,7 @@ lpfc_intr_handler(int irq, void *dev_id) work_ha_copy &= ~HA_LATT; } - if (work_ha_copy & ~(HA_ERATT|HA_MBATT|HA_LATT)) { + if (work_ha_copy & ~(HA_ERATT | HA_MBATT | HA_LATT)) { /* * Turn off Slow Rings interrupts, LPFC_ELS_RING is * the only slow ring. @@ -5275,28 +5348,10 @@ lpfc_intr_handler(int irq, void *dev_id) spin_unlock(&phba->hbalock); } } - - if (work_ha_copy & HA_ERATT) { - /* - * There was a link/board error. Read the - * status register to retrieve the error event - * and process it. - */ - phba->sli.slistat.err_attn_event++; - /* Save status info */ - phba->work_hs = readl(phba->HSregaddr); - phba->work_status[0] = readl(phba->MBslimaddr + 0xa8); - phba->work_status[1] = readl(phba->MBslimaddr + 0xac); - - /* Clear Chip error bit */ - writel(HA_ERATT, phba->HAregaddr); - readl(phba->HAregaddr); /* flush */ - phba->pport->stopped = 1; - } - spin_lock(&phba->hbalock); - if ((work_ha_copy & HA_MBATT) && - (phba->sli.mbox_active)) { + if (work_ha_copy & HA_ERATT) + lpfc_sli_read_hs(phba); + if ((work_ha_copy & HA_MBATT) && (phba->sli.mbox_active)) { pmb = phba->sli.mbox_active; pmbox = &pmb->mb; mbox = phba->mbox; @@ -5379,6 +5434,7 @@ lpfc_intr_handler(int irq, void *dev_id) } } else spin_unlock(&phba->hbalock); + if ((work_ha_copy & HA_MBATT) && (phba->sli.mbox_active == NULL)) { send_current_mbox: @@ -5398,15 +5454,74 @@ send_current_mbox: spin_unlock(&phba->hbalock); lpfc_worker_wake_up(phba); } + return IRQ_HANDLED; - ha_copy &= ~(phba->work_ha_mask); +} /* lpfc_sp_intr_handler */ + +/** + * lpfc_fp_intr_handler: The fast-path interrupt handler of lpfc driver. + * @irq: Interrupt number. + * @dev_id: The device context pointer. + * + * This function is directly called from the PCI layer as an interrupt + * service routine when the device is enabled with MSI-X multi-message + * interrupt mode and there is a fast-path FCP IOCB ring event in the + * HBA. However, when the device is enabled with either MSI or Pin-IRQ + * interrupt mode, this function is called as part of the device-level + * interrupt handler. When the PCI slot is in error recovery or the HBA + * is undergoing initialization, the interrupt handler will not process + * the interrupt. The SCSI FCP fast-path ring event are handled in the + * intrrupt context. This function is called without any lock held. It + * gets the hbalock to access and update SLI data structures. + * + * This function returns IRQ_HANDLED when interrupt is handled else it + * returns IRQ_NONE. + **/ +irqreturn_t +lpfc_fp_intr_handler(int irq, void *dev_id) +{ + struct lpfc_hba *phba; + uint32_t ha_copy; + unsigned long status; + + /* Get the driver's phba structure from the dev_id and + * assume the HBA is not interrupting. + */ + phba = (struct lpfc_hba *) dev_id; + + if (unlikely(!phba)) + return IRQ_NONE; + + /* + * Stuff needs to be attented to when this function is invoked as an + * individual interrupt handler in MSI-X multi-message interrupt mode + */ + if (phba->intr_type == MSIX) { + /* If pci channel is offline, ignore all the interrupts */ + if (unlikely(pci_channel_offline(phba->pcidev))) + return IRQ_NONE; + /* Update device-level interrupt statistics */ + phba->sli.slistat.sli_intr++; + /* Ignore all interrupts during initialization. */ + if (unlikely(phba->link_state < LPFC_LINK_DOWN)) + return IRQ_NONE; + /* Need to read HA REG for FCP ring and other ring events */ + ha_copy = readl(phba->HAregaddr); + /* Clear up only attention source related to fast-path */ + spin_lock(&phba->hbalock); + writel((ha_copy & (HA_R0_CLR_MSK | HA_R1_CLR_MSK)), + phba->HAregaddr); + readl(phba->HAregaddr); /* flush */ + spin_unlock(&phba->hbalock); + } else + ha_copy = phba->ha_copy; /* - * Process all events on FCP ring. Take the optimized path for - * FCP IO. Any other IO is slow path and is handled by - * the worker thread. + * Process all events on FCP ring. Take the optimized path for FCP IO. */ - status = (ha_copy & (HA_RXMASK << (4*LPFC_FCP_RING))); + ha_copy &= ~(phba->work_ha_mask); + + status = (ha_copy & (HA_RXMASK << (4*LPFC_FCP_RING))); status >>= (4*LPFC_FCP_RING); if (status & HA_RXMASK) lpfc_sli_handle_fast_ring_event(phba, @@ -5415,11 +5530,10 @@ send_current_mbox: if (phba->cfg_multi_ring_support == 2) { /* - * Process all events on extra ring. Take the optimized path - * for extra ring IO. Any other IO is slow path and is handled - * by the worker thread. + * Process all events on extra ring. Take the optimized path + * for extra ring IO. */ - status = (ha_copy & (HA_RXMASK << (4*LPFC_EXTRA_RING))); + status = (ha_copy & (HA_RXMASK << (4*LPFC_EXTRA_RING))); status >>= (4*LPFC_EXTRA_RING); if (status & HA_RXMASK) { lpfc_sli_handle_fast_ring_event(phba, @@ -5428,5 +5542,106 @@ send_current_mbox: } } return IRQ_HANDLED; +} /* lpfc_fp_intr_handler */ + +/** + * lpfc_intr_handler: The device-level interrupt handler of lpfc driver. + * @irq: Interrupt number. + * @dev_id: The device context pointer. + * + * This function is the device-level interrupt handler called from the PCI + * layer when either MSI or Pin-IRQ interrupt mode is enabled and there is + * an event in the HBA which requires driver attention. This function + * invokes the slow-path interrupt attention handling function and fast-path + * interrupt attention handling function in turn to process the relevant + * HBA attention events. This function is called without any lock held. It + * gets the hbalock to access and update SLI data structures. + * + * This function returns IRQ_HANDLED when interrupt is handled, else it + * returns IRQ_NONE. + **/ +irqreturn_t +lpfc_intr_handler(int irq, void *dev_id) +{ + struct lpfc_hba *phba; + irqreturn_t sp_irq_rc, fp_irq_rc; + unsigned long status1, status2; + + /* + * Get the driver's phba structure from the dev_id and + * assume the HBA is not interrupting. + */ + phba = (struct lpfc_hba *) dev_id; + + if (unlikely(!phba)) + return IRQ_NONE; + + /* If the pci channel is offline, ignore all the interrupts. */ + if (unlikely(pci_channel_offline(phba->pcidev))) + return IRQ_NONE; + + /* Update device level interrupt statistics */ + phba->sli.slistat.sli_intr++; + + /* Ignore all interrupts during initialization. */ + if (unlikely(phba->link_state < LPFC_LINK_DOWN)) + return IRQ_NONE; + + spin_lock(&phba->hbalock); + phba->ha_copy = readl(phba->HAregaddr); + if (unlikely(!phba->ha_copy)) { + spin_unlock(&phba->hbalock); + return IRQ_NONE; + } else if (phba->ha_copy & HA_ERATT) { + if (phba->hba_flag & HBA_ERATT_HANDLED) + /* ERATT polling has handled ERATT */ + phba->ha_copy &= ~HA_ERATT; + else + /* Indicate interrupt handler handles ERATT */ + phba->hba_flag |= HBA_ERATT_HANDLED; + } + + /* Clear attention sources except link and error attentions */ + writel((phba->ha_copy & ~(HA_LATT | HA_ERATT)), phba->HAregaddr); + readl(phba->HAregaddr); /* flush */ + spin_unlock(&phba->hbalock); + + /* + * Invokes slow-path host attention interrupt handling as appropriate. + */ + + /* status of events with mailbox and link attention */ + status1 = phba->ha_copy & (HA_MBATT | HA_LATT | HA_ERATT); + + /* status of events with ELS ring */ + status2 = (phba->ha_copy & (HA_RXMASK << (4*LPFC_ELS_RING))); + status2 >>= (4*LPFC_ELS_RING); + + if (status1 || (status2 & HA_RXMASK)) + sp_irq_rc = lpfc_sp_intr_handler(irq, dev_id); + else + sp_irq_rc = IRQ_NONE; + + /* + * Invoke fast-path host attention interrupt handling as appropriate. + */ + + /* status of events with FCP ring */ + status1 = (phba->ha_copy & (HA_RXMASK << (4*LPFC_FCP_RING))); + status1 >>= (4*LPFC_FCP_RING); + + /* status of events with extra ring */ + if (phba->cfg_multi_ring_support == 2) { + status2 = (phba->ha_copy & (HA_RXMASK << (4*LPFC_EXTRA_RING))); + status2 >>= (4*LPFC_EXTRA_RING); + } else + status2 = 0; + + if ((status1 & HA_RXMASK) || (status2 & HA_RXMASK)) + fp_irq_rc = lpfc_fp_intr_handler(irq, dev_id); + else + fp_irq_rc = IRQ_NONE; -} /* lpfc_intr_handler */ + /* Return device-level interrupt handling status */ + return (sp_irq_rc == IRQ_HANDLED) ? sp_irq_rc : fp_irq_rc; +} /* lpfc_intr_handler */ diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h index ad24cacfbe1..1a62e57a6a2 100644 --- a/drivers/scsi/lpfc/lpfc_version.h +++ b/drivers/scsi/lpfc/lpfc_version.h @@ -20,7 +20,9 @@ #define LPFC_DRIVER_VERSION "8.2.7" -#define LPFC_DRIVER_NAME "lpfc" +#define LPFC_DRIVER_NAME "lpfc" +#define LPFC_SP_DRIVER_HANDLER_NAME "lpfc:sp" +#define LPFC_FP_DRIVER_HANDLER_NAME "lpfc:fp" #define LPFC_MODULE_DESC "Emulex LightPulse Fibre Channel SCSI driver " \ LPFC_DRIVER_VERSION -- cgit v1.2.3 From d9cc21fa8caee54e7960114bce8946f563a8fddd Mon Sep 17 00:00:00 2001 From: James Smart Date: Sun, 24 Aug 2008 21:50:45 -0400 Subject: [SCSI] lpfc 8.2.8 : update driver version to 8.2.8 Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h index 1a62e57a6a2..cc43e9de22c 100644 --- a/drivers/scsi/lpfc/lpfc_version.h +++ b/drivers/scsi/lpfc/lpfc_version.h @@ -18,7 +18,7 @@ * included with this package. * *******************************************************************/ -#define LPFC_DRIVER_VERSION "8.2.7" +#define LPFC_DRIVER_VERSION "8.2.8" #define LPFC_DRIVER_NAME "lpfc" #define LPFC_SP_DRIVER_HANDLER_NAME "lpfc:sp" -- cgit v1.2.3 From 64f84bc1cf49aa5e0c4b945b434e5d4b74e0831d Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Sat, 6 Sep 2008 08:39:16 -0500 Subject: [SCSI] scsi_dh_alua: remove REQ_NOMERGE We do not need to set REQ_NOMERGE because when the module calls blk_execute_rq -> blk_execute_rq_nowait, blk_execute_rq_nowait sets it for us. This brings all the modules in sync for those bits. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/device_handler/scsi_dh_alua.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c index cb8aa3b58c2..e356b43753f 100644 --- a/drivers/scsi/device_handler/scsi_dh_alua.c +++ b/drivers/scsi/device_handler/scsi_dh_alua.c @@ -110,7 +110,7 @@ static struct request *get_alua_req(struct scsi_device *sdev, rq->cmd_type = REQ_TYPE_BLOCK_PC; rq->cmd_flags |= REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | - REQ_FAILFAST_DRIVER | REQ_NOMERGE; + REQ_FAILFAST_DRIVER; rq->retries = ALUA_FAILOVER_RETRIES; rq->timeout = ALUA_FAILOVER_TIMEOUT; -- cgit v1.2.3 From b522d7d42d7ce843885d4c6740c5bd50876a2971 Mon Sep 17 00:00:00 2001 From: James Smart Date: Sun, 7 Sep 2008 11:51:56 -0400 Subject: [SCSI] lpfc 8.2.8 v2 : Revert target busy in favor of transport disrupted Revert the target busy response in favor of the transport disrupted response for node state transitions. Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_scsi.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 5dae4d30675..72eef7e4a89 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -1071,8 +1071,10 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) * Catch race where our node has transitioned, but the * transport is still transitioning. */ - if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) - goto out_target_busy; + if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) { + cmnd->result = ScsiResult(DID_TRANSPORT_DISRUPTED, 0); + goto out_fail_command; + } lpfc_cmd = lpfc_get_scsi_buf(phba); if (lpfc_cmd == NULL) { @@ -1118,8 +1120,6 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) lpfc_release_scsi_buf(phba, lpfc_cmd); out_host_busy: return SCSI_MLQUEUE_HOST_BUSY; - out_target_busy: - return SCSI_MLQUEUE_TARGET_BUSY; out_fail_command: done(cmnd); -- cgit v1.2.3 From 977b5a0af6d22a1a0170057c19cde37eeac68acd Mon Sep 17 00:00:00 2001 From: James Smart Date: Sun, 7 Sep 2008 11:52:04 -0400 Subject: [SCSI] lpfc 8.2.8 v2 : Add sysfs control of target queue depth handling Added new sysfs attribute lpfc_max_scsicmpl_time. Attribute, when enabled, will control target queue depth based on I/O completion time. Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc.h | 6 ++++++ drivers/scsi/lpfc/lpfc_attr.c | 44 ++++++++++++++++++++++++++++++++++++++++ drivers/scsi/lpfc/lpfc_disc.h | 3 +++ drivers/scsi/lpfc/lpfc_hbadisc.c | 2 ++ drivers/scsi/lpfc/lpfc_scsi.c | 29 ++++++++++++++++++++++++++ drivers/scsi/lpfc/lpfc_scsi.h | 1 + 6 files changed, 85 insertions(+) (limited to 'drivers/scsi') diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 18153846611..3a500d68306 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -34,6 +34,11 @@ struct lpfc_sli2_slim; #define LPFC_IOCB_LIST_CNT 2250 /* list of IOCBs for fast-path usage. */ #define LPFC_Q_RAMP_UP_INTERVAL 120 /* lun q_depth ramp up interval */ #define LPFC_VNAME_LEN 100 /* vport symbolic name length */ +#define LPFC_TGTQ_INTERVAL 40000 /* Min amount of time between tgt + queue depth change in millisecs */ +#define LPFC_TGTQ_RAMPUP_PCENT 5 /* Target queue rampup in percentage */ +#define LPFC_MIN_TGT_QDEPTH 100 +#define LPFC_MAX_TGT_QDEPTH 0xFFFF /* * Following time intervals are used of adjusting SCSI device @@ -363,6 +368,7 @@ struct lpfc_vport { uint32_t cfg_log_verbose; uint32_t cfg_max_luns; uint32_t cfg_enable_da_id; + uint32_t cfg_max_scsicmpl_time; uint32_t dev_loss_tmo_changed; diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 21397f37010..343b0b36ed2 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -2296,6 +2296,48 @@ LPFC_VPORT_ATTR_R(fcp_class, 3, 2, 3, LPFC_VPORT_ATTR_RW(use_adisc, 0, 0, 1, "Use ADISC on rediscovery to authenticate FCP devices"); +/* +# lpfc_max_scsicmpl_time: Use scsi command completion time to control I/O queue +# depth. Default value is 0. When the value of this parameter is zero the +# SCSI command completion time is not used for controlling I/O queue depth. When +# the parameter is set to a non-zero value, the I/O queue depth is controlled +# to limit the I/O completion time to the parameter value. +# The value is set in milliseconds. +*/ +static int lpfc_max_scsicmpl_time; +module_param(lpfc_max_scsicmpl_time, int, 0); +MODULE_PARM_DESC(lpfc_max_scsicmpl_time, + "Use command completion time to control queue depth"); +lpfc_vport_param_show(max_scsicmpl_time); +lpfc_vport_param_init(max_scsicmpl_time, 0, 0, 60000); +static int +lpfc_max_scsicmpl_time_set(struct lpfc_vport *vport, int val) +{ + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + struct lpfc_nodelist *ndlp, *next_ndlp; + + if (val == vport->cfg_max_scsicmpl_time) + return 0; + if ((val < 0) || (val > 60000)) + return -EINVAL; + vport->cfg_max_scsicmpl_time = val; + + spin_lock_irq(shost->host_lock); + list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) { + if (!NLP_CHK_NODE_ACT(ndlp)) + continue; + if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) + continue; + ndlp->cmd_qdepth = LPFC_MAX_TGT_QDEPTH; + } + spin_unlock_irq(shost->host_lock); + return 0; +} +lpfc_vport_param_store(max_scsicmpl_time); +static DEVICE_ATTR(lpfc_max_scsicmpl_time, S_IRUGO | S_IWUSR, + lpfc_max_scsicmpl_time_show, + lpfc_max_scsicmpl_time_store); + /* # lpfc_ack0: Use ACK0, instead of ACK1 for class 2 acknowledgement. Value # range is [0,1]. Default value is 0. @@ -2459,6 +2501,7 @@ struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_lpfc_enable_hba_reset, &dev_attr_lpfc_enable_hba_heartbeat, &dev_attr_lpfc_sg_seg_cnt, + &dev_attr_lpfc_max_scsicmpl_time, NULL, }; @@ -3580,6 +3623,7 @@ lpfc_get_vport_cfgparam(struct lpfc_vport *vport) lpfc_restrict_login_init(vport, lpfc_restrict_login); lpfc_fcp_class_init(vport, lpfc_fcp_class); lpfc_use_adisc_init(vport, lpfc_use_adisc); + lpfc_max_scsicmpl_time_init(vport, lpfc_max_scsicmpl_time); lpfc_fdmi_on_init(vport, lpfc_fdmi_on); lpfc_discovery_threads_init(vport, lpfc_discovery_threads); lpfc_max_luns_init(vport, lpfc_max_luns); diff --git a/drivers/scsi/lpfc/lpfc_disc.h b/drivers/scsi/lpfc/lpfc_disc.h index 2db0b74b6fa..ccf8f41f345 100644 --- a/drivers/scsi/lpfc/lpfc_disc.h +++ b/drivers/scsi/lpfc/lpfc_disc.h @@ -88,6 +88,9 @@ struct lpfc_nodelist { unsigned long last_ramp_up_time; /* jiffy of last ramp up */ unsigned long last_q_full_time; /* jiffy of last queue full */ struct kref kref; + atomic_t cmd_pending; + uint32_t cmd_qdepth; + unsigned long last_change_time; }; /* Defines for nlp_flag (uint32) */ diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 3b00d9b86c7..887a5283605 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -2988,6 +2988,8 @@ lpfc_nlp_init(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, INIT_LIST_HEAD(&ndlp->nlp_listp); kref_init(&ndlp->kref); NLP_INT_NODE_ACT(ndlp); + atomic_set(&ndlp->cmd_pending, 0); + ndlp->cmd_qdepth = LPFC_MAX_TGT_QDEPTH; lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_NODE, "node init: did:x%x", diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 72eef7e4a89..7b17f52660b 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -628,6 +628,7 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, lpfc_cmd->result = pIocbOut->iocb.un.ulpWord[4]; lpfc_cmd->status = pIocbOut->iocb.ulpStatus; + atomic_dec(&pnode->cmd_pending); if (lpfc_cmd->status) { if (lpfc_cmd->status == IOSTAT_LOCAL_REJECT && @@ -688,6 +689,29 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, result = cmd->result; sdev = cmd->device; + if (vport->cfg_max_scsicmpl_time && + time_after(jiffies, lpfc_cmd->start_time + + msecs_to_jiffies(vport->cfg_max_scsicmpl_time))) { + spin_lock_irqsave(sdev->host->host_lock, flags); + if ((pnode->cmd_qdepth > atomic_read(&pnode->cmd_pending) && + (atomic_read(&pnode->cmd_pending) > LPFC_MIN_TGT_QDEPTH) && + ((cmd->cmnd[0] == READ_10) || (cmd->cmnd[0] == WRITE_10)))) + pnode->cmd_qdepth = atomic_read(&pnode->cmd_pending); + + pnode->last_change_time = jiffies; + spin_unlock_irqrestore(sdev->host->host_lock, flags); + } else if ((pnode->cmd_qdepth < LPFC_MAX_TGT_QDEPTH) && + time_after(jiffies, pnode->last_change_time + + msecs_to_jiffies(LPFC_TGTQ_INTERVAL))) { + spin_lock_irqsave(sdev->host->host_lock, flags); + pnode->cmd_qdepth += pnode->cmd_qdepth * + LPFC_TGTQ_RAMPUP_PCENT / 100; + if (pnode->cmd_qdepth > LPFC_MAX_TGT_QDEPTH) + pnode->cmd_qdepth = LPFC_MAX_TGT_QDEPTH; + pnode->last_change_time = jiffies; + spin_unlock_irqrestore(sdev->host->host_lock, flags); + } + lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd); cmd->scsi_done(cmd); @@ -1075,6 +1099,8 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) cmnd->result = ScsiResult(DID_TRANSPORT_DISRUPTED, 0); goto out_fail_command; } + if (atomic_read(&ndlp->cmd_pending) >= ndlp->cmd_qdepth) + goto out_host_busy; lpfc_cmd = lpfc_get_scsi_buf(phba); if (lpfc_cmd == NULL) { @@ -1093,6 +1119,7 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) lpfc_cmd->pCmd = cmnd; lpfc_cmd->rdata = rdata; lpfc_cmd->timeout = 0; + lpfc_cmd->start_time = jiffies; cmnd->host_scribble = (unsigned char *)lpfc_cmd; cmnd->scsi_done = done; @@ -1102,6 +1129,7 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) lpfc_scsi_prep_cmnd(vport, lpfc_cmd, ndlp); + atomic_inc(&ndlp->cmd_pending); err = lpfc_sli_issue_iocb(phba, &phba->sli.ring[psli->fcp_ring], &lpfc_cmd->cur_iocbq, SLI_IOCB_RET_IOCB); if (err) @@ -1116,6 +1144,7 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) return 0; out_host_busy_free_buf: + atomic_dec(&ndlp->cmd_pending); lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd); lpfc_release_scsi_buf(phba, lpfc_cmd); out_host_busy: diff --git a/drivers/scsi/lpfc/lpfc_scsi.h b/drivers/scsi/lpfc/lpfc_scsi.h index daba9237498..6737cabe9a7 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.h +++ b/drivers/scsi/lpfc/lpfc_scsi.h @@ -139,6 +139,7 @@ struct lpfc_scsi_buf { */ struct lpfc_iocbq cur_iocbq; wait_queue_head_t *waitq; + unsigned long start_time; }; #define LPFC_SCSI_DMA_EXT_SIZE 264 -- cgit v1.2.3 From ea2151b4e142fa2de0319d9dd80413a997bf435a Mon Sep 17 00:00:00 2001 From: James Smart Date: Sun, 7 Sep 2008 11:52:10 -0400 Subject: [SCSI] lpfc 8.2.8 v2 : Add statistical reporting control and additional fc vendor events Added support for new sysfs attributes: lpfc_stat_data_ctrl and lpfc_max_scsicmpl_time. The attributes control statistical reporting of io load. Added support for new fc vendor events for error reporting. Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc.h | 27 +-- drivers/scsi/lpfc/lpfc_attr.c | 343 ++++++++++++++++++++++++++++++++++++- drivers/scsi/lpfc/lpfc_crtn.h | 6 + drivers/scsi/lpfc/lpfc_ct.c | 1 + drivers/scsi/lpfc/lpfc_debugfs.c | 1 + drivers/scsi/lpfc/lpfc_disc.h | 20 +++ drivers/scsi/lpfc/lpfc_els.c | 114 ++++++++++++ drivers/scsi/lpfc/lpfc_hbadisc.c | 143 +++++++++++++++- drivers/scsi/lpfc/lpfc_init.c | 22 +++ drivers/scsi/lpfc/lpfc_mbox.c | 1 + drivers/scsi/lpfc/lpfc_mem.c | 1 + drivers/scsi/lpfc/lpfc_nl.h | 163 ++++++++++++++++++ drivers/scsi/lpfc/lpfc_nportdisc.c | 1 + drivers/scsi/lpfc/lpfc_scsi.c | 279 +++++++++++++++++++++++++++++- drivers/scsi/lpfc/lpfc_scsi.h | 4 + drivers/scsi/lpfc/lpfc_sli.c | 12 ++ drivers/scsi/lpfc/lpfc_vport.c | 80 +++++++++ drivers/scsi/lpfc/lpfc_vport.h | 4 + 18 files changed, 1207 insertions(+), 15 deletions(-) create mode 100644 drivers/scsi/lpfc/lpfc_nl.h (limited to 'drivers/scsi') diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 3a500d68306..60a9e6e9384 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -40,6 +40,8 @@ struct lpfc_sli2_slim; #define LPFC_MIN_TGT_QDEPTH 100 #define LPFC_MAX_TGT_QDEPTH 0xFFFF +#define LPFC_MAX_BUCKET_COUNT 20 /* Maximum no. of buckets for stat data + collection. */ /* * Following time intervals are used of adjusting SCSI device * queue depths when there are driver resource error or Firmware @@ -381,6 +383,8 @@ struct lpfc_vport { struct lpfc_debugfs_trc *disc_trc; atomic_t disc_trc_cnt; #endif + uint8_t stat_data_enabled; + uint8_t stat_data_blocked; }; struct hbq_s { @@ -641,6 +645,17 @@ struct lpfc_hba { uint32_t buffer_tag_count; int wait_4_mlo_maint_flg; wait_queue_head_t wait_4_mlo_m_q; + /* data structure used for latency data collection */ +#define LPFC_NO_BUCKET 0 +#define LPFC_LINEAR_BUCKET 1 +#define LPFC_POWER2_BUCKET 2 + uint8_t bucket_type; + uint32_t bucket_base; + uint32_t bucket_step; + +/* Maximum number of events that can be outstanding at any time*/ +#define LPFC_MAX_EVT_COUNT 512 + atomic_t fast_event_count; }; static inline struct Scsi_Host * @@ -699,15 +714,3 @@ lpfc_sli_read_hs(struct lpfc_hba *phba) return; } -#define FC_REG_DUMP_EVENT 0x10 /* Register for Dump events */ -#define FC_REG_TEMPERATURE_EVENT 0x20 /* Register for temperature - event */ - -struct temp_event { - uint32_t event_type; - uint32_t event_code; - uint32_t data; -}; -#define LPFC_CRIT_TEMP 0x1 -#define LPFC_THRESHOLD_TEMP 0x2 -#define LPFC_NORMAL_TEMP 0x3 diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 343b0b36ed2..aa3d6277581 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -32,6 +32,7 @@ #include "lpfc_hw.h" #include "lpfc_sli.h" +#include "lpfc_nl.h" #include "lpfc_disc.h" #include "lpfc_scsi.h" #include "lpfc.h" @@ -2183,6 +2184,335 @@ lpfc_param_store(topology) static DEVICE_ATTR(lpfc_topology, S_IRUGO | S_IWUSR, lpfc_topology_show, lpfc_topology_store); + +/** + * lpfc_stat_data_ctrl_store: write call back for lpfc_stat_data_ctrl + * sysfs file. + * @dev: Pointer to class device. + * @buf: Data buffer. + * @count: Size of the data buffer. + * + * This function get called when an user write to the lpfc_stat_data_ctrl + * sysfs file. This function parse the command written to the sysfs file + * and take appropriate action. These commands are used for controlling + * driver statistical data collection. + * Following are the command this function handles. + * + * setbucket + * = Set the latency buckets. + * destroybucket = destroy all the buckets. + * start = start data collection + * stop = stop data collection + * reset = reset the collected data + **/ +static ssize_t +lpfc_stat_data_ctrl_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; + struct lpfc_hba *phba = vport->phba; +#define LPFC_MAX_DATA_CTRL_LEN 1024 + static char bucket_data[LPFC_MAX_DATA_CTRL_LEN]; + unsigned long i; + char *str_ptr, *token; + struct lpfc_vport **vports; + struct Scsi_Host *v_shost; + char *bucket_type_str, *base_str, *step_str; + unsigned long base, step, bucket_type; + + if (!strncmp(buf, "setbucket", strlen("setbucket"))) { + if (strlen(buf) > LPFC_MAX_DATA_CTRL_LEN) + return -EINVAL; + + strcpy(bucket_data, buf); + str_ptr = &bucket_data[0]; + /* Ignore this token - this is command token */ + token = strsep(&str_ptr, "\t "); + if (!token) + return -EINVAL; + + bucket_type_str = strsep(&str_ptr, "\t "); + if (!bucket_type_str) + return -EINVAL; + + if (!strncmp(bucket_type_str, "linear", strlen("linear"))) + bucket_type = LPFC_LINEAR_BUCKET; + else if (!strncmp(bucket_type_str, "power2", strlen("power2"))) + bucket_type = LPFC_POWER2_BUCKET; + else + return -EINVAL; + + base_str = strsep(&str_ptr, "\t "); + if (!base_str) + return -EINVAL; + base = simple_strtoul(base_str, NULL, 0); + + step_str = strsep(&str_ptr, "\t "); + if (!step_str) + return -EINVAL; + step = simple_strtoul(step_str, NULL, 0); + if (!step) + return -EINVAL; + + /* Block the data collection for every vport */ + vports = lpfc_create_vport_work_array(phba); + if (vports == NULL) + return -ENOMEM; + + for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) { + v_shost = lpfc_shost_from_vport(vports[i]); + spin_lock_irq(v_shost->host_lock); + /* Block and reset data collection */ + vports[i]->stat_data_blocked = 1; + if (vports[i]->stat_data_enabled) + lpfc_vport_reset_stat_data(vports[i]); + spin_unlock_irq(v_shost->host_lock); + } + + /* Set the bucket attributes */ + phba->bucket_type = bucket_type; + phba->bucket_base = base; + phba->bucket_step = step; + + for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) { + v_shost = lpfc_shost_from_vport(vports[i]); + + /* Unblock data collection */ + spin_lock_irq(v_shost->host_lock); + vports[i]->stat_data_blocked = 0; + spin_unlock_irq(v_shost->host_lock); + } + lpfc_destroy_vport_work_array(phba, vports); + return strlen(buf); + } + + if (!strncmp(buf, "destroybucket", strlen("destroybucket"))) { + vports = lpfc_create_vport_work_array(phba); + if (vports == NULL) + return -ENOMEM; + + for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) { + v_shost = lpfc_shost_from_vport(vports[i]); + spin_lock_irq(shost->host_lock); + vports[i]->stat_data_blocked = 1; + lpfc_free_bucket(vport); + vport->stat_data_enabled = 0; + vports[i]->stat_data_blocked = 0; + spin_unlock_irq(shost->host_lock); + } + lpfc_destroy_vport_work_array(phba, vports); + phba->bucket_type = LPFC_NO_BUCKET; + phba->bucket_base = 0; + phba->bucket_step = 0; + return strlen(buf); + } + + if (!strncmp(buf, "start", strlen("start"))) { + /* If no buckets configured return error */ + if (phba->bucket_type == LPFC_NO_BUCKET) + return -EINVAL; + spin_lock_irq(shost->host_lock); + if (vport->stat_data_enabled) { + spin_unlock_irq(shost->host_lock); + return strlen(buf); + } + lpfc_alloc_bucket(vport); + vport->stat_data_enabled = 1; + spin_unlock_irq(shost->host_lock); + return strlen(buf); + } + + if (!strncmp(buf, "stop", strlen("stop"))) { + spin_lock_irq(shost->host_lock); + if (vport->stat_data_enabled == 0) { + spin_unlock_irq(shost->host_lock); + return strlen(buf); + } + lpfc_free_bucket(vport); + vport->stat_data_enabled = 0; + spin_unlock_irq(shost->host_lock); + return strlen(buf); + } + + if (!strncmp(buf, "reset", strlen("reset"))) { + if ((phba->bucket_type == LPFC_NO_BUCKET) + || !vport->stat_data_enabled) + return strlen(buf); + spin_lock_irq(shost->host_lock); + vport->stat_data_blocked = 1; + lpfc_vport_reset_stat_data(vport); + vport->stat_data_blocked = 0; + spin_unlock_irq(shost->host_lock); + return strlen(buf); + } + return -EINVAL; +} + + +/** + * lpfc_stat_data_ctrl_show: Read callback function for + * lpfc_stat_data_ctrl sysfs file. + * @dev: Pointer to class device object. + * @buf: Data buffer. + * + * This function is the read call back function for + * lpfc_stat_data_ctrl sysfs file. This function report the + * current statistical data collection state. + **/ +static ssize_t +lpfc_stat_data_ctrl_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; + struct lpfc_hba *phba = vport->phba; + int index = 0; + int i; + char *bucket_type; + unsigned long bucket_value; + + switch (phba->bucket_type) { + case LPFC_LINEAR_BUCKET: + bucket_type = "linear"; + break; + case LPFC_POWER2_BUCKET: + bucket_type = "power2"; + break; + default: + bucket_type = "No Bucket"; + break; + } + + sprintf(&buf[index], "Statistical Data enabled :%d, " + "blocked :%d, Bucket type :%s, Bucket base :%d," + " Bucket step :%d\nLatency Ranges :", + vport->stat_data_enabled, vport->stat_data_blocked, + bucket_type, phba->bucket_base, phba->bucket_step); + index = strlen(buf); + if (phba->bucket_type != LPFC_NO_BUCKET) { + for (i = 0; i < LPFC_MAX_BUCKET_COUNT; i++) { + if (phba->bucket_type == LPFC_LINEAR_BUCKET) + bucket_value = phba->bucket_base + + phba->bucket_step * i; + else + bucket_value = phba->bucket_base + + (1 << i) * phba->bucket_step; + + if (index + 10 > PAGE_SIZE) + break; + sprintf(&buf[index], "%08ld ", bucket_value); + index = strlen(buf); + } + } + sprintf(&buf[index], "\n"); + return strlen(buf); +} + +/* + * Sysfs attribute to control the statistical data collection. + */ +static DEVICE_ATTR(lpfc_stat_data_ctrl, S_IRUGO | S_IWUSR, + lpfc_stat_data_ctrl_show, lpfc_stat_data_ctrl_store); + +/* + * lpfc_drvr_stat_data: sysfs attr to get driver statistical data. + */ + +/* + * Each Bucket takes 11 characters and 1 new line + 17 bytes WWN + * for each target. + */ +#define STAT_DATA_SIZE_PER_TARGET(NUM_BUCKETS) ((NUM_BUCKETS) * 11 + 18) +#define MAX_STAT_DATA_SIZE_PER_TARGET \ + STAT_DATA_SIZE_PER_TARGET(LPFC_MAX_BUCKET_COUNT) + + +/** + * sysfs_drvr_stat_data_read: Read callback function for lpfc_drvr_stat_data + * sysfs attribute. + * @kobj: Pointer to the kernel object + * @bin_attr: Attribute object + * @buff: Buffer pointer + * @off: File offset + * @count: Buffer size + * + * This function is the read call back function for lpfc_drvr_stat_data + * sysfs file. This function export the statistical data to user + * applications. + **/ +static ssize_t +sysfs_drvr_stat_data_read(struct kobject *kobj, struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + struct device *dev = container_of(kobj, struct device, + kobj); + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; + struct lpfc_hba *phba = vport->phba; + int i = 0, index = 0; + unsigned long nport_index; + struct lpfc_nodelist *ndlp = NULL; + nport_index = (unsigned long)off / + MAX_STAT_DATA_SIZE_PER_TARGET; + + if (!vport->stat_data_enabled || vport->stat_data_blocked + || (phba->bucket_type == LPFC_NO_BUCKET)) + return 0; + + spin_lock_irq(shost->host_lock); + list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) { + if (!NLP_CHK_NODE_ACT(ndlp) || !ndlp->lat_data) + continue; + + if (nport_index > 0) { + nport_index--; + continue; + } + + if ((index + MAX_STAT_DATA_SIZE_PER_TARGET) + > count) + break; + + if (!ndlp->lat_data) + continue; + + /* Print the WWN */ + sprintf(&buf[index], "%02x%02x%02x%02x%02x%02x%02x%02x:", + ndlp->nlp_portname.u.wwn[0], + ndlp->nlp_portname.u.wwn[1], + ndlp->nlp_portname.u.wwn[2], + ndlp->nlp_portname.u.wwn[3], + ndlp->nlp_portname.u.wwn[4], + ndlp->nlp_portname.u.wwn[5], + ndlp->nlp_portname.u.wwn[6], + ndlp->nlp_portname.u.wwn[7]); + + index = strlen(buf); + + for (i = 0; i < LPFC_MAX_BUCKET_COUNT; i++) { + sprintf(&buf[index], "%010u,", + ndlp->lat_data[i].cmd_count); + index = strlen(buf); + } + sprintf(&buf[index], "\n"); + index = strlen(buf); + } + spin_unlock_irq(shost->host_lock); + return index; +} + +static struct bin_attribute sysfs_drvr_stat_data_attr = { + .attr = { + .name = "lpfc_drvr_stat_data", + .mode = S_IRUSR, + .owner = THIS_MODULE, + }, + .size = LPFC_MAX_TARGET * MAX_STAT_DATA_SIZE_PER_TARGET, + .read = sysfs_drvr_stat_data_read, + .write = NULL, +}; + /* # lpfc_link_speed: Link speed selection for initializing the Fibre Channel # connection. @@ -2502,6 +2832,7 @@ struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_lpfc_enable_hba_heartbeat, &dev_attr_lpfc_sg_seg_cnt, &dev_attr_lpfc_max_scsicmpl_time, + &dev_attr_lpfc_stat_data_ctrl, NULL, }; @@ -2524,6 +2855,8 @@ struct device_attribute *lpfc_vport_attrs[] = { &dev_attr_nport_evt_cnt, &dev_attr_npiv_info, &dev_attr_lpfc_enable_da_id, + &dev_attr_lpfc_max_scsicmpl_time, + &dev_attr_lpfc_stat_data_ctrl, NULL, }; @@ -2958,7 +3291,14 @@ lpfc_alloc_sysfs_attr(struct lpfc_vport *vport) if (error) goto out_remove_ctlreg_attr; + error = sysfs_create_bin_file(&shost->shost_dev.kobj, + &sysfs_drvr_stat_data_attr); + if (error) + goto out_remove_mbox_attr; + return 0; +out_remove_mbox_attr: + sysfs_remove_bin_file(&shost->shost_dev.kobj, &sysfs_mbox_attr); out_remove_ctlreg_attr: sysfs_remove_bin_file(&shost->shost_dev.kobj, &sysfs_ctlreg_attr); out: @@ -2973,7 +3313,8 @@ void lpfc_free_sysfs_attr(struct lpfc_vport *vport) { struct Scsi_Host *shost = lpfc_shost_from_vport(vport); - + sysfs_remove_bin_file(&shost->shost_dev.kobj, + &sysfs_drvr_stat_data_attr); sysfs_remove_bin_file(&shost->shost_dev.kobj, &sysfs_mbox_attr); sysfs_remove_bin_file(&shost->shost_dev.kobj, &sysfs_ctlreg_attr); } diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index 7d173f4a37f..044ef4057d2 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -294,6 +294,12 @@ void lpfc_ramp_down_queue_handler(struct lpfc_hba *); void lpfc_ramp_up_queue_handler(struct lpfc_hba *); void lpfc_scsi_dev_block(struct lpfc_hba *); +void +lpfc_send_els_failure_event(struct lpfc_hba *, struct lpfc_iocbq *, + struct lpfc_iocbq *); +struct lpfc_fast_path_event *lpfc_alloc_fast_evt(struct lpfc_hba *); +void lpfc_free_fast_evt(struct lpfc_hba *, struct lpfc_fast_path_event *); + #define ScsiResult(host_code, scsi_code) (((host_code) << 16) | scsi_code) #define HBA_EVENT_RSCN 5 #define HBA_EVENT_LINK_UP 2 diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c index 71cfee884b8..26dae8bae2d 100644 --- a/drivers/scsi/lpfc/lpfc_ct.c +++ b/drivers/scsi/lpfc/lpfc_ct.c @@ -34,6 +34,7 @@ #include "lpfc_hw.h" #include "lpfc_sli.h" +#include "lpfc_nl.h" #include "lpfc_disc.h" #include "lpfc_scsi.h" #include "lpfc.h" diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c index f85b99a7c43..771920bdde4 100644 --- a/drivers/scsi/lpfc/lpfc_debugfs.c +++ b/drivers/scsi/lpfc/lpfc_debugfs.c @@ -35,6 +35,7 @@ #include "lpfc_hw.h" #include "lpfc_sli.h" +#include "lpfc_nl.h" #include "lpfc_disc.h" #include "lpfc_scsi.h" #include "lpfc.h" diff --git a/drivers/scsi/lpfc/lpfc_disc.h b/drivers/scsi/lpfc/lpfc_disc.h index ccf8f41f345..f29e548a90d 100644 --- a/drivers/scsi/lpfc/lpfc_disc.h +++ b/drivers/scsi/lpfc/lpfc_disc.h @@ -37,6 +37,7 @@ enum lpfc_work_type { LPFC_EVT_KILL, LPFC_EVT_ELS_RETRY, LPFC_EVT_DEV_LOSS, + LPFC_EVT_FASTPATH_MGMT_EVT, }; /* structure used to queue event to the discovery tasklet */ @@ -47,6 +48,24 @@ struct lpfc_work_evt { enum lpfc_work_type evt; }; +struct lpfc_scsi_check_condition_event; +struct lpfc_scsi_varqueuedepth_event; +struct lpfc_scsi_event_header; +struct lpfc_fabric_event_header; +struct lpfc_fcprdchkerr_event; + +/* structure used for sending events from fast path */ +struct lpfc_fast_path_event { + struct lpfc_work_evt work_evt; + struct lpfc_vport *vport; + union { + struct lpfc_scsi_check_condition_event check_cond_evt; + struct lpfc_scsi_varqueuedepth_event queue_depth_evt; + struct lpfc_scsi_event_header scsi_evt; + struct lpfc_fabric_event_header fabric_evt; + struct lpfc_fcprdchkerr_event read_check_error; + } un; +}; struct lpfc_nodelist { struct list_head nlp_listp; @@ -91,6 +110,7 @@ struct lpfc_nodelist { atomic_t cmd_pending; uint32_t cmd_qdepth; unsigned long last_change_time; + struct lpfc_scsicmd_bkt *lat_data; /* Latency data */ }; /* Defines for nlp_flag (uint32) */ diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index d0730e79c1a..630bd28fb99 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -30,6 +30,7 @@ #include "lpfc_hw.h" #include "lpfc_sli.h" +#include "lpfc_nl.h" #include "lpfc_disc.h" #include "lpfc_scsi.h" #include "lpfc.h" @@ -5084,6 +5085,116 @@ lpfc_els_flush_all_cmd(struct lpfc_hba *phba) return; } +/** + * lpfc_send_els_failure_event: Posts an ELS command failure event. + * @phba: Pointer to hba context object. + * @cmdiocbp: Pointer to command iocb which reported error. + * @rspiocbp: Pointer to response iocb which reported error. + * + * This function sends an event when there is an ELS command + * failure. + **/ +void +lpfc_send_els_failure_event(struct lpfc_hba *phba, + struct lpfc_iocbq *cmdiocbp, + struct lpfc_iocbq *rspiocbp) +{ + struct lpfc_vport *vport = cmdiocbp->vport; + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + struct lpfc_lsrjt_event lsrjt_event; + struct lpfc_fabric_event_header fabric_event; + struct ls_rjt stat; + struct lpfc_nodelist *ndlp; + uint32_t *pcmd; + + ndlp = cmdiocbp->context1; + if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) + return; + + if (rspiocbp->iocb.ulpStatus == IOSTAT_LS_RJT) { + lsrjt_event.header.event_type = FC_REG_ELS_EVENT; + lsrjt_event.header.subcategory = LPFC_EVENT_LSRJT_RCV; + memcpy(lsrjt_event.header.wwpn, &ndlp->nlp_portname, + sizeof(struct lpfc_name)); + memcpy(lsrjt_event.header.wwnn, &ndlp->nlp_nodename, + sizeof(struct lpfc_name)); + pcmd = (uint32_t *) (((struct lpfc_dmabuf *) + cmdiocbp->context2)->virt); + lsrjt_event.command = *pcmd; + stat.un.lsRjtError = be32_to_cpu(rspiocbp->iocb.un.ulpWord[4]); + lsrjt_event.reason_code = stat.un.b.lsRjtRsnCode; + lsrjt_event.explanation = stat.un.b.lsRjtRsnCodeExp; + fc_host_post_vendor_event(shost, + fc_get_event_number(), + sizeof(lsrjt_event), + (char *)&lsrjt_event, + SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX); + return; + } + if ((rspiocbp->iocb.ulpStatus == IOSTAT_NPORT_BSY) || + (rspiocbp->iocb.ulpStatus == IOSTAT_FABRIC_BSY)) { + fabric_event.event_type = FC_REG_FABRIC_EVENT; + if (rspiocbp->iocb.ulpStatus == IOSTAT_NPORT_BSY) + fabric_event.subcategory = LPFC_EVENT_PORT_BUSY; + else + fabric_event.subcategory = LPFC_EVENT_FABRIC_BUSY; + memcpy(fabric_event.wwpn, &ndlp->nlp_portname, + sizeof(struct lpfc_name)); + memcpy(fabric_event.wwnn, &ndlp->nlp_nodename, + sizeof(struct lpfc_name)); + fc_host_post_vendor_event(shost, + fc_get_event_number(), + sizeof(fabric_event), + (char *)&fabric_event, + SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX); + return; + } + +} + +/** + * lpfc_send_els_event: Posts unsolicited els event. + * @vport: Pointer to vport object. + * @ndlp: Pointer FC node object. + * @cmd: ELS command code. + * + * This function posts an event when there is an incoming + * unsolicited ELS command. + **/ +static void +lpfc_send_els_event(struct lpfc_vport *vport, + struct lpfc_nodelist *ndlp, + uint32_t cmd) +{ + struct lpfc_els_event_header els_data; + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + + els_data.event_type = FC_REG_ELS_EVENT; + switch (cmd) { + case ELS_CMD_PLOGI: + els_data.subcategory = LPFC_EVENT_PLOGI_RCV; + break; + case ELS_CMD_PRLO: + els_data.subcategory = LPFC_EVENT_PRLO_RCV; + break; + case ELS_CMD_ADISC: + els_data.subcategory = LPFC_EVENT_ADISC_RCV; + break; + default: + return; + } + memcpy(els_data.wwpn, &ndlp->nlp_portname, sizeof(struct lpfc_name)); + memcpy(els_data.wwnn, &ndlp->nlp_nodename, sizeof(struct lpfc_name)); + fc_host_post_vendor_event(shost, + fc_get_event_number(), + sizeof(els_data), + (char *)&els_data, + SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX); + + return; +} + + /** * lpfc_els_unsol_buffer: Process an unsolicited event data buffer. * @phba: pointer to lpfc hba data structure. @@ -5185,6 +5296,7 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, phba->fc_stat.elsRcvPLOGI++; ndlp = lpfc_plogi_confirm_nport(phba, payload, ndlp); + lpfc_send_els_event(vport, ndlp, cmd); if (vport->port_state < LPFC_DISC_AUTH) { if (!(phba->pport->fc_flag & FC_PT2PT) || (phba->pport->fc_flag & FC_PT2PT_PLOGI)) { @@ -5234,6 +5346,7 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, did, vport->port_state, ndlp->nlp_flag); phba->fc_stat.elsRcvPRLO++; + lpfc_send_els_event(vport, ndlp, cmd); if (vport->port_state < LPFC_DISC_AUTH) { rjt_err = LSRJT_UNABLE_TPC; break; @@ -5251,6 +5364,7 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, "RCV ADISC: did:x%x/ste:x%x flg:x%x", did, vport->port_state, ndlp->nlp_flag); + lpfc_send_els_event(vport, ndlp, cmd); phba->fc_stat.elsRcvADISC++; if (vport->port_state < LPFC_DISC_AUTH) { rjt_err = LSRJT_UNABLE_TPC; diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 887a5283605..a1a70d9ffc2 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -30,6 +30,7 @@ #include #include "lpfc_hw.h" +#include "lpfc_nl.h" #include "lpfc_disc.h" #include "lpfc_sli.h" #include "lpfc_scsi.h" @@ -274,6 +275,124 @@ lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp) lpfc_disc_state_machine(vport, ndlp, NULL, NLP_EVT_DEVICE_RM); } +/** + * lpfc_alloc_fast_evt: Allocates data structure for posting event. + * @phba: Pointer to hba context object. + * + * This function is called from the functions which need to post + * events from interrupt context. This function allocates data + * structure required for posting event. It also keeps track of + * number of events pending and prevent event storm when there are + * too many events. + **/ +struct lpfc_fast_path_event * +lpfc_alloc_fast_evt(struct lpfc_hba *phba) { + struct lpfc_fast_path_event *ret; + + /* If there are lot of fast event do not exhaust memory due to this */ + if (atomic_read(&phba->fast_event_count) > LPFC_MAX_EVT_COUNT) + return NULL; + + ret = kzalloc(sizeof(struct lpfc_fast_path_event), + GFP_ATOMIC); + if (ret) + atomic_inc(&phba->fast_event_count); + INIT_LIST_HEAD(&ret->work_evt.evt_listp); + ret->work_evt.evt = LPFC_EVT_FASTPATH_MGMT_EVT; + return ret; +} + +/** + * lpfc_free_fast_evt: Frees event data structure. + * @phba: Pointer to hba context object. + * @evt: Event object which need to be freed. + * + * This function frees the data structure required for posting + * events. + **/ +void +lpfc_free_fast_evt(struct lpfc_hba *phba, + struct lpfc_fast_path_event *evt) { + + atomic_dec(&phba->fast_event_count); + kfree(evt); +} + +/** + * lpfc_send_fastpath_evt: Posts events generated from fast path. + * @phba: Pointer to hba context object. + * @evtp: Event data structure. + * + * This function is called from worker thread, when the interrupt + * context need to post an event. This function posts the event + * to fc transport netlink interface. + **/ +static void +lpfc_send_fastpath_evt(struct lpfc_hba *phba, + struct lpfc_work_evt *evtp) +{ + unsigned long evt_category, evt_sub_category; + struct lpfc_fast_path_event *fast_evt_data; + char *evt_data; + uint32_t evt_data_size; + struct Scsi_Host *shost; + + fast_evt_data = container_of(evtp, struct lpfc_fast_path_event, + work_evt); + + evt_category = (unsigned long) fast_evt_data->un.fabric_evt.event_type; + evt_sub_category = (unsigned long) fast_evt_data->un. + fabric_evt.subcategory; + shost = lpfc_shost_from_vport(fast_evt_data->vport); + if (evt_category == FC_REG_FABRIC_EVENT) { + if (evt_sub_category == LPFC_EVENT_FCPRDCHKERR) { + evt_data = (char *) &fast_evt_data->un.read_check_error; + evt_data_size = sizeof(fast_evt_data->un. + read_check_error); + } else if ((evt_sub_category == LPFC_EVENT_FABRIC_BUSY) || + (evt_sub_category == IOSTAT_NPORT_BSY)) { + evt_data = (char *) &fast_evt_data->un.fabric_evt; + evt_data_size = sizeof(fast_evt_data->un.fabric_evt); + } else { + lpfc_free_fast_evt(phba, fast_evt_data); + return; + } + } else if (evt_category == FC_REG_SCSI_EVENT) { + switch (evt_sub_category) { + case LPFC_EVENT_QFULL: + case LPFC_EVENT_DEVBSY: + evt_data = (char *) &fast_evt_data->un.scsi_evt; + evt_data_size = sizeof(fast_evt_data->un.scsi_evt); + break; + case LPFC_EVENT_CHECK_COND: + evt_data = (char *) &fast_evt_data->un.check_cond_evt; + evt_data_size = sizeof(fast_evt_data->un. + check_cond_evt); + break; + case LPFC_EVENT_VARQUEDEPTH: + evt_data = (char *) &fast_evt_data->un.queue_depth_evt; + evt_data_size = sizeof(fast_evt_data->un. + queue_depth_evt); + break; + default: + lpfc_free_fast_evt(phba, fast_evt_data); + return; + } + } else { + lpfc_free_fast_evt(phba, fast_evt_data); + return; + } + + fc_host_post_vendor_event(shost, + fc_get_event_number(), + evt_data_size, + evt_data, + SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX); + + lpfc_free_fast_evt(phba, fast_evt_data); + return; +} + static void lpfc_work_list_done(struct lpfc_hba *phba) { @@ -345,6 +464,10 @@ lpfc_work_list_done(struct lpfc_hba *phba) lpfc_unblock_mgmt_io(phba); complete((struct completion *)(evtp->evt_arg2)); break; + case LPFC_EVT_FASTPATH_MGMT_EVT: + lpfc_send_fastpath_evt(phba, evtp); + free_evt = 0; + break; } if (free_evt) kfree(evtp); @@ -1601,6 +1724,22 @@ lpfc_nlp_state_cleanup(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, */ lpfc_register_remote_port(vport, ndlp); } + if ((new_state == NLP_STE_MAPPED_NODE) && + (vport->stat_data_enabled)) { + /* + * A new target is discovered, if there is no buffer for + * statistical data collection allocate buffer. + */ + ndlp->lat_data = kcalloc(LPFC_MAX_BUCKET_COUNT, + sizeof(struct lpfc_scsicmd_bkt), + GFP_KERNEL); + + if (!ndlp->lat_data) + lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE, + "0286 lpfc_nlp_state_cleanup failed to " + "allocate statistical data buffer DID " + "0x%x\n", ndlp->nlp_DID); + } /* * if we added to Mapped list, but the remote port * registration failed or assigned a target id outside @@ -3029,8 +3168,10 @@ lpfc_nlp_release(struct kref *kref) spin_unlock_irqrestore(&phba->ndlp_lock, flags); /* free ndlp memory for final ndlp release */ - if (NLP_CHK_FREE_REQ(ndlp)) + if (NLP_CHK_FREE_REQ(ndlp)) { + kfree(ndlp->lat_data); mempool_free(ndlp, ndlp->vport->phba->nlp_mem_pool); + } } /* This routine bumps the reference count for a ndlp structure to ensure diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 49577d5f130..909be3301bb 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -36,6 +36,7 @@ #include "lpfc_hw.h" #include "lpfc_sli.h" +#include "lpfc_nl.h" #include "lpfc_disc.h" #include "lpfc_scsi.h" #include "lpfc.h" @@ -815,6 +816,7 @@ lpfc_handle_eratt(struct lpfc_hba *phba) unsigned long temperature; struct temp_event temp_event_data; struct Scsi_Host *shost; + struct lpfc_board_event_header board_event; /* If the pci channel is offline, ignore possible errors, * since we cannot communicate with the pci card anyway. */ @@ -824,6 +826,16 @@ lpfc_handle_eratt(struct lpfc_hba *phba) if (!phba->cfg_enable_hba_reset) return; + /* Send an internal error event to mgmt application */ + board_event.event_type = FC_REG_BOARD_EVENT; + board_event.subcategory = LPFC_EVENT_PORTINTERR; + shost = lpfc_shost_from_vport(phba->pport); + fc_host_post_vendor_event(shost, fc_get_event_number(), + sizeof(board_event), + (char *) &board_event, + SCSI_NL_VID_TYPE_PCI + | PCI_VENDOR_ID_EMULEX); + if (phba->work_hs & HS_FFER6) { /* Re-establishing Link */ lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT, @@ -2345,6 +2357,7 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) int i, hbq_count; uint16_t iotag; int bars = pci_select_bars(pdev, IORESOURCE_MEM); + struct lpfc_adapter_event_header adapter_event; if (pci_enable_device_mem(pdev)) goto out; @@ -2355,6 +2368,7 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) if (!phba) goto out_release_regions; + atomic_set(&phba->fast_event_count, 0); spin_lock_init(&phba->hbalock); /* Initialize ndlp management spinlock */ @@ -2626,6 +2640,14 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "0428 Perform SCSI scan\n"); + /* Send board arrival event to upper layer */ + adapter_event.event_type = FC_REG_ADAPTER_EVENT; + adapter_event.subcategory = LPFC_EVENT_ARRIVAL; + fc_host_post_vendor_event(shost, fc_get_event_number(), + sizeof(adapter_event), + (char *) &adapter_event, + SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX); + scsi_scan_host(shost); return 0; diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c index 65bc8e1a5f7..7465fe746fe 100644 --- a/drivers/scsi/lpfc/lpfc_mbox.c +++ b/drivers/scsi/lpfc/lpfc_mbox.c @@ -30,6 +30,7 @@ #include "lpfc_hw.h" #include "lpfc_sli.h" +#include "lpfc_nl.h" #include "lpfc_disc.h" #include "lpfc_scsi.h" #include "lpfc.h" diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c index 50d9136a6e0..a4bba206924 100644 --- a/drivers/scsi/lpfc/lpfc_mem.c +++ b/drivers/scsi/lpfc/lpfc_mem.c @@ -30,6 +30,7 @@ #include "lpfc_hw.h" #include "lpfc_sli.h" +#include "lpfc_nl.h" #include "lpfc_disc.h" #include "lpfc_scsi.h" #include "lpfc.h" diff --git a/drivers/scsi/lpfc/lpfc_nl.h b/drivers/scsi/lpfc/lpfc_nl.h new file mode 100644 index 00000000000..1accb5a9f4e --- /dev/null +++ b/drivers/scsi/lpfc/lpfc_nl.h @@ -0,0 +1,163 @@ +/******************************************************************* + * This file is part of the Emulex Linux Device Driver for * + * Fibre Channel Host Bus Adapters. * + * Copyright (C) 2008 Emulex. All rights reserved. * + * EMULEX and SLI are trademarks of Emulex. * + * www.emulex.com * + * * + * This program is free software; you can redistribute it and/or * + * modify it under the terms of version 2 of the GNU General * + * Public License as published by the Free Software Foundation. * + * This program is distributed in the hope that it will be useful. * + * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * + * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * + * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * + * TO BE LEGALLY INVALID. See the GNU General Public License for * + * more details, a copy of which can be found in the file COPYING * + * included with this package. * + *******************************************************************/ + +/* Event definitions for RegisterForEvent */ +#define FC_REG_LINK_EVENT 0x0001 /* link up / down events */ +#define FC_REG_RSCN_EVENT 0x0002 /* RSCN events */ +#define FC_REG_CT_EVENT 0x0004 /* CT request events */ +#define FC_REG_DUMP_EVENT 0x0008 /* Dump events */ +#define FC_REG_TEMPERATURE_EVENT 0x0010 /* temperature events */ +#define FC_REG_ELS_EVENT 0x0020 /* lpfc els events */ +#define FC_REG_FABRIC_EVENT 0x0040 /* lpfc fabric events */ +#define FC_REG_SCSI_EVENT 0x0080 /* lpfc scsi events */ +#define FC_REG_BOARD_EVENT 0x0100 /* lpfc board events */ +#define FC_REG_ADAPTER_EVENT 0x0200 /* lpfc adapter events */ +#define FC_REG_EVENT_MASK (FC_REG_LINK_EVENT | \ + FC_REG_RSCN_EVENT | \ + FC_REG_CT_EVENT | \ + FC_REG_DUMP_EVENT | \ + FC_REG_TEMPERATURE_EVENT | \ + FC_REG_ELS_EVENT | \ + FC_REG_FABRIC_EVENT | \ + FC_REG_SCSI_EVENT | \ + FC_REG_BOARD_EVENT | \ + FC_REG_ADAPTER_EVENT) +/* Temperature events */ +#define LPFC_CRIT_TEMP 0x1 +#define LPFC_THRESHOLD_TEMP 0x2 +#define LPFC_NORMAL_TEMP 0x3 +/* + * All net link event payloads will begin with and event type + * and subcategory. The event type must come first. + * The subcategory further defines the data that follows in the rest + * of the payload. Each category will have its own unique header plus + * any addtional data unique to the subcategory. + * The payload sent via the fc transport is one-way driver->application. + */ + +/* els event header */ +struct lpfc_els_event_header { + uint32_t event_type; + uint32_t subcategory; + uint8_t wwpn[8]; + uint8_t wwnn[8]; +}; + +/* subcategory codes for FC_REG_ELS_EVENT */ +#define LPFC_EVENT_PLOGI_RCV 0x01 +#define LPFC_EVENT_PRLO_RCV 0x02 +#define LPFC_EVENT_ADISC_RCV 0x04 +#define LPFC_EVENT_LSRJT_RCV 0x08 + +/* special els lsrjt event */ +struct lpfc_lsrjt_event { + struct lpfc_els_event_header header; + uint32_t command; + uint32_t reason_code; + uint32_t explanation; +}; + + +/* fabric event header */ +struct lpfc_fabric_event_header { + uint32_t event_type; + uint32_t subcategory; + uint8_t wwpn[8]; + uint8_t wwnn[8]; +}; + +/* subcategory codes for FC_REG_FABRIC_EVENT */ +#define LPFC_EVENT_FABRIC_BUSY 0x01 +#define LPFC_EVENT_PORT_BUSY 0x02 +#define LPFC_EVENT_FCPRDCHKERR 0x04 + +/* special case fabric fcprdchkerr event */ +struct lpfc_fcprdchkerr_event { + struct lpfc_fabric_event_header header; + uint32_t lun; + uint32_t opcode; + uint32_t fcpiparam; +}; + + +/* scsi event header */ +struct lpfc_scsi_event_header { + uint32_t event_type; + uint32_t subcategory; + uint32_t lun; + uint8_t wwpn[8]; + uint8_t wwnn[8]; +}; + +/* subcategory codes for FC_REG_SCSI_EVENT */ +#define LPFC_EVENT_QFULL 0x0001 +#define LPFC_EVENT_DEVBSY 0x0002 +#define LPFC_EVENT_CHECK_COND 0x0004 +#define LPFC_EVENT_LUNRESET 0x0008 +#define LPFC_EVENT_TGTRESET 0x0010 +#define LPFC_EVENT_BUSRESET 0x0020 +#define LPFC_EVENT_VARQUEDEPTH 0x0040 + +/* special case scsi varqueuedepth event */ +struct lpfc_scsi_varqueuedepth_event { + struct lpfc_scsi_event_header scsi_event; + uint32_t oldval; + uint32_t newval; +}; + +/* special case scsi check condition event */ +struct lpfc_scsi_check_condition_event { + struct lpfc_scsi_event_header scsi_event; + uint8_t sense_key; + uint8_t asc; + uint8_t ascq; +}; + +/* event codes for FC_REG_BOARD_EVENT */ +#define LPFC_EVENT_PORTINTERR 0x01 + +/* board event header */ +struct lpfc_board_event_header { + uint32_t event_type; + uint32_t subcategory; +}; + + +/* event codes for FC_REG_ADAPTER_EVENT */ +#define LPFC_EVENT_ARRIVAL 0x01 + +/* adapter event header */ +struct lpfc_adapter_event_header { + uint32_t event_type; + uint32_t subcategory; +}; + + +/* event codes for temp_event */ +#define LPFC_CRIT_TEMP 0x1 +#define LPFC_THRESHOLD_TEMP 0x2 +#define LPFC_NORMAL_TEMP 0x3 + +struct temp_event { + uint32_t event_type; + uint32_t event_code; + uint32_t data; +}; + diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index 83ffa75378e..0c25d97acb4 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -30,6 +30,7 @@ #include "lpfc_hw.h" #include "lpfc_sli.h" +#include "lpfc_nl.h" #include "lpfc_disc.h" #include "lpfc_scsi.h" #include "lpfc.h" diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 7b17f52660b..bd186741182 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -32,6 +32,7 @@ #include "lpfc_version.h" #include "lpfc_hw.h" #include "lpfc_sli.h" +#include "lpfc_nl.h" #include "lpfc_disc.h" #include "lpfc_scsi.h" #include "lpfc.h" @@ -42,6 +43,111 @@ #define LPFC_RESET_WAIT 2 #define LPFC_ABORT_WAIT 2 +/** + * lpfc_update_stats: Update statistical data for the command completion. + * @phba: Pointer to HBA object. + * @lpfc_cmd: lpfc scsi command object pointer. + * + * This function is called when there is a command completion and this + * function updates the statistical data for the command completion. + **/ +static void +lpfc_update_stats(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) +{ + struct lpfc_rport_data *rdata = lpfc_cmd->rdata; + struct lpfc_nodelist *pnode = rdata->pnode; + struct scsi_cmnd *cmd = lpfc_cmd->pCmd; + unsigned long flags; + struct Scsi_Host *shost = cmd->device->host; + struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; + unsigned long latency; + int i; + + if (cmd->result) + return; + + spin_lock_irqsave(shost->host_lock, flags); + if (!vport->stat_data_enabled || + vport->stat_data_blocked || + !pnode->lat_data || + (phba->bucket_type == LPFC_NO_BUCKET)) { + spin_unlock_irqrestore(shost->host_lock, flags); + return; + } + latency = jiffies_to_msecs(jiffies - lpfc_cmd->start_time); + + if (phba->bucket_type == LPFC_LINEAR_BUCKET) { + i = (latency + phba->bucket_step - 1 - phba->bucket_base)/ + phba->bucket_step; + if (i >= LPFC_MAX_BUCKET_COUNT) + i = LPFC_MAX_BUCKET_COUNT; + } else { + for (i = 0; i < LPFC_MAX_BUCKET_COUNT-1; i++) + if (latency <= (phba->bucket_base + + ((1<bucket_step))) + break; + } + + pnode->lat_data[i].cmd_count++; + spin_unlock_irqrestore(shost->host_lock, flags); +} + + +/** + * lpfc_send_sdev_queuedepth_change_event: Posts a queuedepth change + * event. + * @phba: Pointer to HBA context object. + * @vport: Pointer to vport object. + * @ndlp: Pointer to FC node associated with the target. + * @lun: Lun number of the scsi device. + * @old_val: Old value of the queue depth. + * @new_val: New value of the queue depth. + * + * This function sends an event to the mgmt application indicating + * there is a change in the scsi device queue depth. + **/ +static void +lpfc_send_sdev_queuedepth_change_event(struct lpfc_hba *phba, + struct lpfc_vport *vport, + struct lpfc_nodelist *ndlp, + uint32_t lun, + uint32_t old_val, + uint32_t new_val) +{ + struct lpfc_fast_path_event *fast_path_evt; + unsigned long flags; + + fast_path_evt = lpfc_alloc_fast_evt(phba); + if (!fast_path_evt) + return; + + fast_path_evt->un.queue_depth_evt.scsi_event.event_type = + FC_REG_SCSI_EVENT; + fast_path_evt->un.queue_depth_evt.scsi_event.subcategory = + LPFC_EVENT_VARQUEDEPTH; + + /* Report all luns with change in queue depth */ + fast_path_evt->un.queue_depth_evt.scsi_event.lun = lun; + if (ndlp && NLP_CHK_NODE_ACT(ndlp)) { + memcpy(&fast_path_evt->un.queue_depth_evt.scsi_event.wwpn, + &ndlp->nlp_portname, sizeof(struct lpfc_name)); + memcpy(&fast_path_evt->un.queue_depth_evt.scsi_event.wwnn, + &ndlp->nlp_nodename, sizeof(struct lpfc_name)); + } + + fast_path_evt->un.queue_depth_evt.oldval = old_val; + fast_path_evt->un.queue_depth_evt.newval = new_val; + fast_path_evt->vport = vport; + + fast_path_evt->work_evt.evt = LPFC_EVT_FASTPATH_MGMT_EVT; + spin_lock_irqsave(&phba->hbalock, flags); + list_add_tail(&fast_path_evt->work_evt.evt_listp, &phba->work_list); + spin_unlock_irqrestore(&phba->hbalock, flags); + lpfc_worker_wake_up(phba); + + return; +} + /* * This function is called with no lock held when there is a resource * error in driver or in firmware. @@ -117,9 +223,10 @@ lpfc_ramp_down_queue_handler(struct lpfc_hba *phba) struct lpfc_vport **vports; struct Scsi_Host *shost; struct scsi_device *sdev; - unsigned long new_queue_depth; + unsigned long new_queue_depth, old_queue_depth; unsigned long num_rsrc_err, num_cmd_success; int i; + struct lpfc_rport_data *rdata; num_rsrc_err = atomic_read(&phba->num_rsrc_err); num_cmd_success = atomic_read(&phba->num_cmd_success); @@ -137,6 +244,7 @@ lpfc_ramp_down_queue_handler(struct lpfc_hba *phba) else new_queue_depth = sdev->queue_depth - new_queue_depth; + old_queue_depth = sdev->queue_depth; if (sdev->ordered_tags) scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, @@ -145,6 +253,13 @@ lpfc_ramp_down_queue_handler(struct lpfc_hba *phba) scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, new_queue_depth); + rdata = sdev->hostdata; + if (rdata) + lpfc_send_sdev_queuedepth_change_event( + phba, vports[i], + rdata->pnode, + sdev->lun, old_queue_depth, + new_queue_depth); } } lpfc_destroy_vport_work_array(phba, vports); @@ -159,6 +274,7 @@ lpfc_ramp_up_queue_handler(struct lpfc_hba *phba) struct Scsi_Host *shost; struct scsi_device *sdev; int i; + struct lpfc_rport_data *rdata; vports = lpfc_create_vport_work_array(phba); if (vports != NULL) @@ -176,6 +292,14 @@ lpfc_ramp_up_queue_handler(struct lpfc_hba *phba) scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, sdev->queue_depth+1); + rdata = sdev->hostdata; + if (rdata) + lpfc_send_sdev_queuedepth_change_event( + phba, vports[i], + rdata->pnode, + sdev->lun, + sdev->queue_depth - 1, + sdev->queue_depth); } } lpfc_destroy_vport_work_array(phba, vports); @@ -466,6 +590,97 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) return 0; } +/** + * lpfc_send_scsi_error_event: Posts an event when there is SCSI error. + * @phba: Pointer to hba context object. + * @vport: Pointer to vport object. + * @lpfc_cmd: Pointer to lpfc scsi command which reported the error. + * @rsp_iocb: Pointer to response iocb object which reported error. + * + * This function posts an event when there is a SCSI command reporting + * error from the scsi device. + **/ +static void +lpfc_send_scsi_error_event(struct lpfc_hba *phba, struct lpfc_vport *vport, + struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_iocbq *rsp_iocb) { + struct scsi_cmnd *cmnd = lpfc_cmd->pCmd; + struct fcp_rsp *fcprsp = lpfc_cmd->fcp_rsp; + uint32_t resp_info = fcprsp->rspStatus2; + uint32_t scsi_status = fcprsp->rspStatus3; + uint32_t fcpi_parm = rsp_iocb->iocb.un.fcpi.fcpi_parm; + struct lpfc_fast_path_event *fast_path_evt = NULL; + struct lpfc_nodelist *pnode = lpfc_cmd->rdata->pnode; + unsigned long flags; + + /* If there is queuefull or busy condition send a scsi event */ + if ((cmnd->result == SAM_STAT_TASK_SET_FULL) || + (cmnd->result == SAM_STAT_BUSY)) { + fast_path_evt = lpfc_alloc_fast_evt(phba); + if (!fast_path_evt) + return; + fast_path_evt->un.scsi_evt.event_type = + FC_REG_SCSI_EVENT; + fast_path_evt->un.scsi_evt.subcategory = + (cmnd->result == SAM_STAT_TASK_SET_FULL) ? + LPFC_EVENT_QFULL : LPFC_EVENT_DEVBSY; + fast_path_evt->un.scsi_evt.lun = cmnd->device->lun; + memcpy(&fast_path_evt->un.scsi_evt.wwpn, + &pnode->nlp_portname, sizeof(struct lpfc_name)); + memcpy(&fast_path_evt->un.scsi_evt.wwnn, + &pnode->nlp_nodename, sizeof(struct lpfc_name)); + } else if ((resp_info & SNS_LEN_VALID) && fcprsp->rspSnsLen && + ((cmnd->cmnd[0] == READ_10) || (cmnd->cmnd[0] == WRITE_10))) { + fast_path_evt = lpfc_alloc_fast_evt(phba); + if (!fast_path_evt) + return; + fast_path_evt->un.check_cond_evt.scsi_event.event_type = + FC_REG_SCSI_EVENT; + fast_path_evt->un.check_cond_evt.scsi_event.subcategory = + LPFC_EVENT_CHECK_COND; + fast_path_evt->un.check_cond_evt.scsi_event.lun = + cmnd->device->lun; + memcpy(&fast_path_evt->un.check_cond_evt.scsi_event.wwpn, + &pnode->nlp_portname, sizeof(struct lpfc_name)); + memcpy(&fast_path_evt->un.check_cond_evt.scsi_event.wwnn, + &pnode->nlp_nodename, sizeof(struct lpfc_name)); + fast_path_evt->un.check_cond_evt.sense_key = + cmnd->sense_buffer[2] & 0xf; + fast_path_evt->un.check_cond_evt.asc = cmnd->sense_buffer[12]; + fast_path_evt->un.check_cond_evt.ascq = cmnd->sense_buffer[13]; + } else if ((cmnd->sc_data_direction == DMA_FROM_DEVICE) && + fcpi_parm && + ((be32_to_cpu(fcprsp->rspResId) != fcpi_parm) || + ((scsi_status == SAM_STAT_GOOD) && + !(resp_info & (RESID_UNDER | RESID_OVER))))) { + /* + * If status is good or resid does not match with fcp_param and + * there is valid fcpi_parm, then there is a read_check error + */ + fast_path_evt = lpfc_alloc_fast_evt(phba); + if (!fast_path_evt) + return; + fast_path_evt->un.read_check_error.header.event_type = + FC_REG_FABRIC_EVENT; + fast_path_evt->un.read_check_error.header.subcategory = + LPFC_EVENT_FCPRDCHKERR; + memcpy(&fast_path_evt->un.read_check_error.header.wwpn, + &pnode->nlp_portname, sizeof(struct lpfc_name)); + memcpy(&fast_path_evt->un.read_check_error.header.wwnn, + &pnode->nlp_nodename, sizeof(struct lpfc_name)); + fast_path_evt->un.read_check_error.lun = cmnd->device->lun; + fast_path_evt->un.read_check_error.opcode = cmnd->cmnd[0]; + fast_path_evt->un.read_check_error.fcpiparam = + fcpi_parm; + } else + return; + + fast_path_evt->vport = vport; + spin_lock_irqsave(&phba->hbalock, flags); + list_add_tail(&fast_path_evt->work_evt.evt_listp, &phba->work_list); + spin_unlock_irqrestore(&phba->hbalock, flags); + lpfc_worker_wake_up(phba); + return; +} static void lpfc_scsi_unprep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb) { @@ -494,6 +709,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, uint32_t rsplen = 0; uint32_t logit = LOG_FCP | LOG_FCP_ERROR; + /* * If this is a task management command, there is no * scsi packet associated with this lpfc_cmd. The driver @@ -609,6 +825,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, out: cmnd->result = ScsiResult(host_status, scsi_status); + lpfc_send_scsi_error_event(vport->phba, vport, lpfc_cmd, rsp_iocb); } static void @@ -625,6 +842,7 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, struct scsi_device *sdev, *tmp_sdev; int depth = 0; unsigned long flags; + struct lpfc_fast_path_event *fast_path_evt; lpfc_cmd->result = pIocbOut->iocb.un.ulpWord[4]; lpfc_cmd->status = pIocbOut->iocb.ulpStatus; @@ -655,6 +873,30 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, case IOSTAT_NPORT_BSY: case IOSTAT_FABRIC_BSY: cmd->result = ScsiResult(DID_TRANSPORT_DISRUPTED, 0); + fast_path_evt = lpfc_alloc_fast_evt(phba); + if (!fast_path_evt) + break; + fast_path_evt->un.fabric_evt.event_type = + FC_REG_FABRIC_EVENT; + fast_path_evt->un.fabric_evt.subcategory = + (lpfc_cmd->status == IOSTAT_NPORT_BSY) ? + LPFC_EVENT_PORT_BUSY : LPFC_EVENT_FABRIC_BUSY; + if (pnode && NLP_CHK_NODE_ACT(pnode)) { + memcpy(&fast_path_evt->un.fabric_evt.wwpn, + &pnode->nlp_portname, + sizeof(struct lpfc_name)); + memcpy(&fast_path_evt->un.fabric_evt.wwnn, + &pnode->nlp_nodename, + sizeof(struct lpfc_name)); + } + fast_path_evt->vport = vport; + fast_path_evt->work_evt.evt = + LPFC_EVT_FASTPATH_MGMT_EVT; + spin_lock_irqsave(&phba->hbalock, flags); + list_add_tail(&fast_path_evt->work_evt.evt_listp, + &phba->work_list); + spin_unlock_irqrestore(&phba->hbalock, flags); + lpfc_worker_wake_up(phba); break; case IOSTAT_LOCAL_REJECT: if (lpfc_cmd->result == IOERR_INVALID_RPI || @@ -687,6 +929,7 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, scsi_get_resid(cmd)); } + lpfc_update_stats(phba, lpfc_cmd); result = cmd->result; sdev = cmd->device; if (vport->cfg_max_scsicmpl_time && @@ -755,6 +998,9 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, pnode->last_ramp_up_time = jiffies; } } + lpfc_send_sdev_queuedepth_change_event(phba, vport, pnode, + 0xFFFFFFFF, + sdev->queue_depth - 1, sdev->queue_depth); } /* @@ -784,6 +1030,9 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP, "0711 detected queue full - lun queue " "depth adjusted to %d.\n", depth); + lpfc_send_sdev_queuedepth_change_event(phba, vport, + pnode, 0xFFFFFFFF, + depth+1, depth); } } @@ -1112,6 +1361,7 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) goto out_host_busy; } + lpfc_cmd->start_time = jiffies; /* * Store the midlayer's command structure for the completion phase * and complete the command initialization. @@ -1280,6 +1530,7 @@ lpfc_device_reset_handler(struct scsi_cmnd *cmnd) int ret = SUCCESS; int status; int cnt; + struct lpfc_scsi_event_header scsi_event; lpfc_block_error_handler(cmnd); /* @@ -1298,6 +1549,19 @@ lpfc_device_reset_handler(struct scsi_cmnd *cmnd) break; pnode = rdata->pnode; } + + scsi_event.event_type = FC_REG_SCSI_EVENT; + scsi_event.subcategory = LPFC_EVENT_TGTRESET; + scsi_event.lun = 0; + memcpy(scsi_event.wwpn, &pnode->nlp_portname, sizeof(struct lpfc_name)); + memcpy(scsi_event.wwnn, &pnode->nlp_nodename, sizeof(struct lpfc_name)); + + fc_host_post_vendor_event(shost, + fc_get_event_number(), + sizeof(scsi_event), + (char *)&scsi_event, + SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX); + if (!rdata || pnode->nlp_state != NLP_STE_MAPPED_NODE) { lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, "0721 LUN Reset rport " @@ -1381,6 +1645,19 @@ lpfc_bus_reset_handler(struct scsi_cmnd *cmnd) int cnt; struct lpfc_scsi_buf * lpfc_cmd; unsigned long later; + struct lpfc_scsi_event_header scsi_event; + + scsi_event.event_type = FC_REG_SCSI_EVENT; + scsi_event.subcategory = LPFC_EVENT_BUSRESET; + scsi_event.lun = 0; + memcpy(scsi_event.wwpn, &vport->fc_portname, sizeof(struct lpfc_name)); + memcpy(scsi_event.wwnn, &vport->fc_nodename, sizeof(struct lpfc_name)); + + fc_host_post_vendor_event(shost, + fc_get_event_number(), + sizeof(scsi_event), + (char *)&scsi_event, + SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX); lpfc_block_error_handler(cmnd); /* diff --git a/drivers/scsi/lpfc/lpfc_scsi.h b/drivers/scsi/lpfc/lpfc_scsi.h index 6737cabe9a7..437f182e232 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.h +++ b/drivers/scsi/lpfc/lpfc_scsi.h @@ -107,6 +107,10 @@ struct fcp_cmnd { }; +struct lpfc_scsicmd_bkt { + uint32_t cmd_count; +}; + struct lpfc_scsi_buf { struct list_head list; struct scsi_cmnd *pCmd; diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 2cca39e9b93..8ab5babdeeb 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -32,6 +32,7 @@ #include "lpfc_hw.h" #include "lpfc_sli.h" +#include "lpfc_nl.h" #include "lpfc_disc.h" #include "lpfc_scsi.h" #include "lpfc.h" @@ -1610,6 +1611,17 @@ lpfc_sli_process_sol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, if (cmdiocbp) { if (cmdiocbp->iocb_cmpl) { + /* + * If an ELS command failed send an event to mgmt + * application. + */ + if (saveq->iocb.ulpStatus && + (pring->ringno == LPFC_ELS_RING) && + (cmdiocbp->iocb.ulpCommand == + CMD_ELS_REQUEST64_CR)) + lpfc_send_els_failure_event(phba, + cmdiocbp, saveq); + /* * Post all ELS completions to the worker thread. * All other are passed to the completion callback. diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c index 2578d5fd953..a7de1cc02b4 100644 --- a/drivers/scsi/lpfc/lpfc_vport.c +++ b/drivers/scsi/lpfc/lpfc_vport.c @@ -34,6 +34,7 @@ #include #include "lpfc_hw.h" #include "lpfc_sli.h" +#include "lpfc_nl.h" #include "lpfc_disc.h" #include "lpfc_scsi.h" #include "lpfc.h" @@ -745,3 +746,82 @@ lpfc_destroy_vport_work_array(struct lpfc_hba *phba, struct lpfc_vport **vports) scsi_host_put(lpfc_shost_from_vport(vports[i])); kfree(vports); } + + +/** + * lpfc_vport_reset_stat_data: Reset the statistical data for the vport. + * @vport: Pointer to vport object. + * + * This function resets the statistical data for the vport. This function + * is called with the host_lock held + **/ +void +lpfc_vport_reset_stat_data(struct lpfc_vport *vport) +{ + struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL; + + list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) { + if (!NLP_CHK_NODE_ACT(ndlp)) + continue; + if (ndlp->lat_data) + memset(ndlp->lat_data, 0, LPFC_MAX_BUCKET_COUNT * + sizeof(struct lpfc_scsicmd_bkt)); + } +} + + +/** + * lpfc_alloc_bucket: Allocate data buffer required for collecting + * statistical data. + * @vport: Pointer to vport object. + * + * This function allocates data buffer required for all the FC + * nodes of the vport to collect statistical data. + **/ +void +lpfc_alloc_bucket(struct lpfc_vport *vport) +{ + struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL; + + list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) { + if (!NLP_CHK_NODE_ACT(ndlp)) + continue; + + kfree(ndlp->lat_data); + ndlp->lat_data = NULL; + + if (ndlp->nlp_state == NLP_STE_MAPPED_NODE) { + ndlp->lat_data = kcalloc(LPFC_MAX_BUCKET_COUNT, + sizeof(struct lpfc_scsicmd_bkt), + GFP_ATOMIC); + + if (!ndlp->lat_data) + lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE, + "0287 lpfc_alloc_bucket failed to " + "allocate statistical data buffer DID " + "0x%x\n", ndlp->nlp_DID); + } + } +} + +/** + * lpfc_free_bucket: Free data buffer required for collecting + * statistical data. + * @vport: Pointer to vport object. + * + * Th function frees statistical data buffer of all the FC + * nodes of the vport. + **/ +void +lpfc_free_bucket(struct lpfc_vport *vport) +{ + struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL; + + list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) { + if (!NLP_CHK_NODE_ACT(ndlp)) + continue; + + kfree(ndlp->lat_data); + ndlp->lat_data = NULL; + } +} diff --git a/drivers/scsi/lpfc/lpfc_vport.h b/drivers/scsi/lpfc/lpfc_vport.h index 96c445333b6..90828340ace 100644 --- a/drivers/scsi/lpfc/lpfc_vport.h +++ b/drivers/scsi/lpfc/lpfc_vport.h @@ -112,4 +112,8 @@ struct vport_cmd_tag { void lpfc_vport_set_state(struct lpfc_vport *vport, enum fc_vport_state new_state); +void lpfc_vport_reset_stat_data(struct lpfc_vport *); +void lpfc_alloc_bucket(struct lpfc_vport *); +void lpfc_free_bucket(struct lpfc_vport *); + #endif /* H_LPFC_VPORT */ -- cgit v1.2.3 From c82dc88ddaf17112841dd3a6b08352968555ee08 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Fri, 12 Sep 2008 16:46:51 -0500 Subject: [SCSI] scsi_error: fix target reset handling There's a target reset bug. This loop: for (id = 0; id <= shost->max_id; id++) { Never terminates if shost->max_id is set to ~0, like aic94xx does. It's also pretty inefficient since you mostly have compact target numbers, but the max_id can be very high. The best way would be to sort the recovery list by target id and skip them if they're equal, but even a worst case O(N^2) traversal is probably OK here, so fix it by finding the next highest target number (assuming n+1) and terminating when there isn't one. Cc: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/scsi_error.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index ad019ece213..94ed262bdf0 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -1065,10 +1065,10 @@ static int scsi_eh_target_reset(struct Scsi_Host *shost, struct list_head *done_q) { struct scsi_cmnd *scmd, *tgtr_scmd, *next; - unsigned int id; + unsigned int id = 0; int rtn; - for (id = 0; id <= shost->max_id; id++) { + do { tgtr_scmd = NULL; list_for_each_entry(scmd, work_q, eh_entry) { if (id == scmd_id(scmd)) { @@ -1076,8 +1076,18 @@ static int scsi_eh_target_reset(struct Scsi_Host *shost, break; } } + if (!tgtr_scmd) { + /* not one exactly equal; find the next highest */ + list_for_each_entry(scmd, work_q, eh_entry) { + if (scmd_id(scmd) > id && + (!tgtr_scmd || + scmd_id(tgtr_scmd) > scmd_id(scmd))) + tgtr_scmd = scmd; + } + } if (!tgtr_scmd) - continue; + /* no more commands, that's it */ + break; SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Sending target reset " "to target %d\n", @@ -1096,7 +1106,8 @@ static int scsi_eh_target_reset(struct Scsi_Host *shost, " failed target: " "%d\n", current->comm, id)); - } + id++; + } while(id != 0); return list_empty(work_q); } -- cgit v1.2.3 From bd623e79fb6bca7ab685bb1f7376476a81ce10bb Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Fri, 19 Sep 2008 18:47:19 -0400 Subject: [SCSI] sd: Issue correct protection operation Use the same logic to prepare RD/WRPROTECT and the protection operation. Fixes a corner case where we could issue an unprotected CDB and yet tell the HBA to do DIF to the drive. Signed-off-by: Martin K. Petersen Signed-off-by: James Bottomley --- drivers/scsi/sd.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index a7b53be6336..fec034557c3 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -384,7 +384,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) sector_t block = rq->sector; sector_t threshold; unsigned int this_count = rq->nr_sectors; - int ret; + int ret, host_dif; if (rq->cmd_type == REQ_TYPE_BLOCK_PC) { ret = scsi_setup_blk_pc_cmnd(sdp, rq); @@ -515,7 +515,8 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) rq->nr_sectors)); /* Set RDPROTECT/WRPROTECT if disk is formatted with DIF */ - if (scsi_host_dif_capable(sdp->host, sdkp->protection_type)) + host_dif = scsi_host_dif_capable(sdp->host, sdkp->protection_type); + if (host_dif) SCpnt->cmnd[1] = 1 << 5; else SCpnt->cmnd[1] = 0; @@ -573,7 +574,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) SCpnt->sdb.length = this_count * sdp->sector_size; /* If DIF or DIX is enabled, tell HBA how to handle request */ - if (sdkp->protection_type || scsi_prot_sg_count(SCpnt)) + if (host_dif || scsi_prot_sg_count(SCpnt)) sd_dif_op(SCpnt, sdkp->protection_type, scsi_prot_sg_count(SCpnt)); /* -- cgit v1.2.3 From be922f478f430f8fab4db952ffc20c86f23de397 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Fri, 19 Sep 2008 18:47:20 -0400 Subject: [SCSI] sd: Always print actual protection_type Now that we no longer use protection_type as trigger for preparing protected CDBs we can remove the places that set it to zero. This allows userland to see which protection type the device is formatted with regardless of whether the HBA supports DIF or not. Signed-off-by: Martin K. Petersen Signed-off-by: James Bottomley --- drivers/scsi/sd.c | 7 ++----- drivers/scsi/sd_dif.c | 1 - 2 files changed, 2 insertions(+), 6 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index fec034557c3..a494a2ec67d 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1253,14 +1253,12 @@ void sd_read_protection_type(struct scsi_disk *sdkp, unsigned char *buffer) else type = ((buffer[12] >> 1) & 7) + 1; /* P_TYPE 0 = Type 1 */ + sdkp->protection_type = type; + switch (type) { case SD_DIF_TYPE0_PROTECTION: - sdkp->protection_type = 0; - break; - case SD_DIF_TYPE1_PROTECTION: case SD_DIF_TYPE3_PROTECTION: - sdkp->protection_type = type; break; case SD_DIF_TYPE2_PROTECTION: @@ -1278,7 +1276,6 @@ void sd_read_protection_type(struct scsi_disk *sdkp, unsigned char *buffer) return; disable: - sdkp->protection_type = 0; sdkp->capacity = 0; } diff --git a/drivers/scsi/sd_dif.c b/drivers/scsi/sd_dif.c index 4d17f3d35aa..943fde7e7ff 100644 --- a/drivers/scsi/sd_dif.c +++ b/drivers/scsi/sd_dif.c @@ -321,7 +321,6 @@ void sd_dif_config_host(struct scsi_disk *sdkp) if (scsi_host_dif_capable(sdp->host, type) == 0) { sd_printk(KERN_INFO, sdkp, "Type %d protection " \ "unsupported by HBA. Disabling DIF.\n", type); - sdkp->protection_type = 0; return; } -- cgit v1.2.3 From 9e06688e7d60149cc9ef78ff29515c20186bb418 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Fri, 19 Sep 2008 18:47:21 -0400 Subject: [SCSI] sd: Correctly handle all combinations of DIF and DIX The old detection code couldn't handle all possible combinations of DIX and DIF. This version does, giving priority to DIX if the controller is capable. Signed-off-by: Martin K. Petersen Signed-off-by: James Bottomley --- drivers/scsi/sd.c | 3 ++- drivers/scsi/sd.h | 2 +- drivers/scsi/sd_dif.c | 37 ++++++++++++++++++++----------------- 3 files changed, 23 insertions(+), 19 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index a494a2ec67d..7c4d2e68df1 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -575,7 +575,8 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) /* If DIF or DIX is enabled, tell HBA how to handle request */ if (host_dif || scsi_prot_sg_count(SCpnt)) - sd_dif_op(SCpnt, sdkp->protection_type, scsi_prot_sg_count(SCpnt)); + sd_dif_op(SCpnt, host_dif, scsi_prot_sg_count(SCpnt), + sdkp->protection_type); /* * We shouldn't disconnect in the middle of a sector, so with a dumb diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h index 95b9f06534d..a92b991d98a 100644 --- a/drivers/scsi/sd.h +++ b/drivers/scsi/sd.h @@ -99,7 +99,7 @@ struct sd_dif_tuple { #if defined(CONFIG_BLK_DEV_INTEGRITY) -extern void sd_dif_op(struct scsi_cmnd *, unsigned int, unsigned int); +extern void sd_dif_op(struct scsi_cmnd *, unsigned int, unsigned int, unsigned int); extern void sd_dif_config_host(struct scsi_disk *); extern int sd_dif_prepare(struct request *rq, sector_t, unsigned int); extern void sd_dif_complete(struct scsi_cmnd *, unsigned int); diff --git a/drivers/scsi/sd_dif.c b/drivers/scsi/sd_dif.c index 943fde7e7ff..194c7706083 100644 --- a/drivers/scsi/sd_dif.c +++ b/drivers/scsi/sd_dif.c @@ -311,24 +311,26 @@ void sd_dif_config_host(struct scsi_disk *sdkp) struct scsi_device *sdp = sdkp->device; struct gendisk *disk = sdkp->disk; u8 type = sdkp->protection_type; + int dif, dix; - /* If this HBA doesn't support DIX, resort to normal I/O or DIF */ - if (scsi_host_dix_capable(sdp->host, type) == 0) { + dif = scsi_host_dif_capable(sdp->host, type); + dix = scsi_host_dix_capable(sdp->host, type); - if (type == SD_DIF_TYPE0_PROTECTION) - return; - - if (scsi_host_dif_capable(sdp->host, type) == 0) { - sd_printk(KERN_INFO, sdkp, "Type %d protection " \ - "unsupported by HBA. Disabling DIF.\n", type); - return; - } + if (!dix && scsi_host_dix_capable(sdp->host, 0)) { + dif = 0; dix = 1; + } - sd_printk(KERN_INFO, sdkp, "Enabling DIF Type %d protection\n", - type); + if (type) { + if (dif) + sd_printk(KERN_INFO, sdkp, + "Enabling DIF Type %d protection\n", type); + else + sd_printk(KERN_INFO, sdkp, + "Disabling DIF Type %d protection\n", type); + } + if (!dix) return; - } /* Enable DMA of protection information */ if (scsi_host_get_guard(sdkp->device->host) & SHOST_DIX_GUARD_IP) @@ -343,10 +345,10 @@ void sd_dif_config_host(struct scsi_disk *sdkp) blk_integrity_register(disk, &dif_type1_integrity_crc); sd_printk(KERN_INFO, sdkp, - "Enabling %s integrity protection\n", disk->integrity->name); + "Enabling DIX %s protection\n", disk->integrity->name); /* Signal to block layer that we support sector tagging */ - if (type && sdkp->ATO) { + if (dif && type && sdkp->ATO) { if (type == SD_DIF_TYPE3_PROTECTION) disk->integrity->tag_size = sizeof(u16) + sizeof(u32); else @@ -360,7 +362,7 @@ void sd_dif_config_host(struct scsi_disk *sdkp) /* * DIF DMA operation magic decoder ring. */ -void sd_dif_op(struct scsi_cmnd *scmd, unsigned int dif, unsigned int dix) +void sd_dif_op(struct scsi_cmnd *scmd, unsigned int dif, unsigned int dix, unsigned int type) { int csum_convert, prot_op; @@ -405,7 +407,8 @@ void sd_dif_op(struct scsi_cmnd *scmd, unsigned int dif, unsigned int dix) } scsi_set_prot_op(scmd, prot_op); - scsi_set_prot_type(scmd, dif); + if (dif) + scsi_set_prot_type(scmd, type); } /* -- cgit v1.2.3 From cbdc14459bd7d99d20341ec057b8f4ffab2a7fb6 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Wed, 1 Oct 2008 01:37:21 -0400 Subject: [SCSI] sd: Switch kernel printing level for DIF messages For some reason these messages ended up being printed with KERN_INFO rendering them invisible to pretty much everyone. Switch to KERN_NOTICE. Signed-off-by: Martin K. Petersen Signed-off-by: James Bottomley --- drivers/scsi/sd_dif.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/sd_dif.c b/drivers/scsi/sd_dif.c index 194c7706083..3ebb1f28949 100644 --- a/drivers/scsi/sd_dif.c +++ b/drivers/scsi/sd_dif.c @@ -322,10 +322,10 @@ void sd_dif_config_host(struct scsi_disk *sdkp) if (type) { if (dif) - sd_printk(KERN_INFO, sdkp, + sd_printk(KERN_NOTICE, sdkp, "Enabling DIF Type %d protection\n", type); else - sd_printk(KERN_INFO, sdkp, + sd_printk(KERN_NOTICE, sdkp, "Disabling DIF Type %d protection\n", type); } @@ -344,7 +344,7 @@ void sd_dif_config_host(struct scsi_disk *sdkp) else blk_integrity_register(disk, &dif_type1_integrity_crc); - sd_printk(KERN_INFO, sdkp, + sd_printk(KERN_NOTICE, sdkp, "Enabling DIX %s protection\n", disk->integrity->name); /* Signal to block layer that we support sector tagging */ @@ -354,7 +354,7 @@ void sd_dif_config_host(struct scsi_disk *sdkp) else disk->integrity->tag_size = sizeof(u16); - sd_printk(KERN_INFO, sdkp, "DIF application tag size %u\n", + sd_printk(KERN_NOTICE, sdkp, "DIF application tag size %u\n", disk->integrity->tag_size); } } -- cgit v1.2.3 From 1d9edf0270cb5a434d32e95279ce9493581906b3 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Wed, 24 Sep 2008 11:46:09 -0500 Subject: [SCSI] libiscsi: fix data corruption when target has to resend data-in packets iscsi_tcp was updating the exp_statsn (exp_statsn acknowledges status and tells the target it is ok to let the resources for a iscsi pdu to be reused) before it got all the data for pdu read into OS buffers. Data corruption was occuring if something happens to a packet and the network layer requests a retransmit, and the initiator has told the target about the udpated exp_statsn ack, then the target may be sending data from a buffer it has reused for a new iscsi pdu. This fixes the problem by having the LLD (iscsi_tcp in this case) just handle the transferring of data, and has libiscsi handle the processing of status (libiscsi completion processing is done after LLD data transfers are complete). Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/iscsi_tcp.c | 29 +++++------------------------ drivers/scsi/libiscsi.c | 41 +++++++++++++++++++++++++++++++++++------ 2 files changed, 40 insertions(+), 30 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 2a2f0094570..e960f00da93 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -523,22 +523,20 @@ iscsi_tcp_cleanup_task(struct iscsi_conn *conn, struct iscsi_task *task) } /** - * iscsi_data_rsp - SCSI Data-In Response processing + * iscsi_data_in - SCSI Data-In Response processing * @conn: iscsi connection * @task: scsi command task **/ static int -iscsi_data_rsp(struct iscsi_conn *conn, struct iscsi_task *task) +iscsi_data_in(struct iscsi_conn *conn, struct iscsi_task *task) { struct iscsi_tcp_conn *tcp_conn = conn->dd_data; struct iscsi_tcp_task *tcp_task = task->dd_data; struct iscsi_data_rsp *rhdr = (struct iscsi_data_rsp *)tcp_conn->in.hdr; - struct iscsi_session *session = conn->session; - struct scsi_cmnd *sc = task->sc; int datasn = be32_to_cpu(rhdr->datasn); - unsigned total_in_length = scsi_in(sc)->length; + unsigned total_in_length = scsi_in(task->sc)->length; - iscsi_update_cmdsn(session, (struct iscsi_nopin*)rhdr); + iscsi_update_cmdsn(conn->session, (struct iscsi_nopin*)rhdr); if (tcp_conn->in.datalen == 0) return 0; @@ -558,23 +556,6 @@ iscsi_data_rsp(struct iscsi_conn *conn, struct iscsi_task *task) return ISCSI_ERR_DATA_OFFSET; } - if (rhdr->flags & ISCSI_FLAG_DATA_STATUS) { - sc->result = (DID_OK << 16) | rhdr->cmd_status; - conn->exp_statsn = be32_to_cpu(rhdr->statsn) + 1; - if (rhdr->flags & (ISCSI_FLAG_DATA_UNDERFLOW | - ISCSI_FLAG_DATA_OVERFLOW)) { - int res_count = be32_to_cpu(rhdr->residual_count); - - if (res_count > 0 && - (rhdr->flags & ISCSI_FLAG_CMD_OVERFLOW || - res_count <= total_in_length)) - scsi_in(sc)->resid = res_count; - else - sc->result = (DID_BAD_TARGET << 16) | - rhdr->cmd_status; - } - } - conn->datain_pdus_cnt++; return 0; } @@ -774,7 +755,7 @@ iscsi_tcp_hdr_dissect(struct iscsi_conn *conn, struct iscsi_hdr *hdr) if (!task) rc = ISCSI_ERR_BAD_ITT; else - rc = iscsi_data_rsp(conn, task); + rc = iscsi_data_in(conn, task); if (rc) { spin_unlock(&conn->session->lock); break; diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 0e8f26baca6..f9539af28f0 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -633,6 +633,40 @@ out: __iscsi_put_task(task); } +/** + * iscsi_data_in_rsp - SCSI Data-In Response processing + * @conn: iscsi connection + * @hdr: iscsi pdu + * @task: scsi command task + **/ +static void +iscsi_data_in_rsp(struct iscsi_conn *conn, struct iscsi_hdr *hdr, + struct iscsi_task *task) +{ + struct iscsi_data_rsp *rhdr = (struct iscsi_data_rsp *)hdr; + struct scsi_cmnd *sc = task->sc; + + if (!(rhdr->flags & ISCSI_FLAG_DATA_STATUS)) + return; + + sc->result = (DID_OK << 16) | rhdr->cmd_status; + conn->exp_statsn = be32_to_cpu(rhdr->statsn) + 1; + if (rhdr->flags & (ISCSI_FLAG_DATA_UNDERFLOW | + ISCSI_FLAG_DATA_OVERFLOW)) { + int res_count = be32_to_cpu(rhdr->residual_count); + + if (res_count > 0 && + (rhdr->flags & ISCSI_FLAG_CMD_OVERFLOW || + res_count <= scsi_in(sc)->length)) + scsi_in(sc)->resid = res_count; + else + sc->result = (DID_BAD_TARGET << 16) | rhdr->cmd_status; + } + + conn->scsirsp_pdus_cnt++; + __iscsi_put_task(task); +} + static void iscsi_tmf_rsp(struct iscsi_conn *conn, struct iscsi_hdr *hdr) { struct iscsi_tm_rsp *tmf = (struct iscsi_tm_rsp *)hdr; @@ -818,12 +852,7 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, iscsi_scsi_cmd_rsp(conn, hdr, task, data, datalen); break; case ISCSI_OP_SCSI_DATA_IN: - if (hdr->flags & ISCSI_FLAG_DATA_STATUS) { - conn->scsirsp_pdus_cnt++; - iscsi_update_cmdsn(session, - (struct iscsi_nopin*) hdr); - __iscsi_put_task(task); - } + iscsi_data_in_rsp(conn, hdr, task); break; case ISCSI_OP_LOGOUT_RSP: iscsi_update_cmdsn(session, (struct iscsi_nopin*)hdr); -- cgit v1.2.3 From e5bd7b54e93ef7151469a12b8c28d863b9f8a088 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Wed, 24 Sep 2008 11:46:10 -0500 Subject: [SCSI] libiscsi: Support drivers initiating session removal If the driver knows when hardware is removed like with cxgb3i, bnx2i, qla4xxx and iser then we will want to remove the sessions/devices that are bound to that device before removing the host. cxgb3i and in the future bnx2i will remove the host and that will remove all the sessions on the hba. iser can call iscsi_kill_session when it gets an event that indicates that a hca is removed. And when qla4xxx is hooked in to the lib (it is only hooked into the class right now) it can call iscsi remove host like the partial offload card drivers. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/iscsi_tcp.c | 1 + drivers/scsi/libiscsi.c | 107 +++++++++++++++++++++++++++++++++--- drivers/scsi/qla4xxx/ql4_os.c | 2 +- drivers/scsi/scsi_transport_iscsi.c | 6 +- 4 files changed, 104 insertions(+), 12 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index e960f00da93..752f42884cc 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -1885,6 +1885,7 @@ static void iscsi_tcp_session_destroy(struct iscsi_cls_session *cls_session) struct Scsi_Host *shost = iscsi_session_to_shost(cls_session); iscsi_r2tpool_free(cls_session->dd_data); + iscsi_session_teardown(cls_session); iscsi_host_remove(shost); iscsi_host_free(shost); diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index f9539af28f0..390781894be 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -983,6 +983,38 @@ struct iscsi_task *iscsi_itt_to_ctask(struct iscsi_conn *conn, itt_t itt) } EXPORT_SYMBOL_GPL(iscsi_itt_to_ctask); +void iscsi_session_failure(struct iscsi_cls_session *cls_session, + enum iscsi_err err) +{ + struct iscsi_session *session = cls_session->dd_data; + struct iscsi_conn *conn; + struct device *dev; + unsigned long flags; + + spin_lock_irqsave(&session->lock, flags); + conn = session->leadconn; + if (session->state == ISCSI_STATE_TERMINATE || !conn) { + spin_unlock_irqrestore(&session->lock, flags); + return; + } + + dev = get_device(&conn->cls_conn->dev); + spin_unlock_irqrestore(&session->lock, flags); + if (!dev) + return; + /* + * if the host is being removed bypass the connection + * recovery initialization because we are going to kill + * the session. + */ + if (err == ISCSI_ERR_INVALID_HOST) + iscsi_conn_error_event(conn->cls_conn, err); + else + iscsi_conn_failure(conn, err); + put_device(dev); +} +EXPORT_SYMBOL_GPL(iscsi_session_failure); + void iscsi_conn_failure(struct iscsi_conn *conn, enum iscsi_err err) { struct iscsi_session *session = conn->session; @@ -997,9 +1029,10 @@ void iscsi_conn_failure(struct iscsi_conn *conn, enum iscsi_err err) if (conn->stop_stage == 0) session->state = ISCSI_STATE_FAILED; spin_unlock_irqrestore(&session->lock, flags); + set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx); set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx); - iscsi_conn_error(conn->cls_conn, err); + iscsi_conn_error_event(conn->cls_conn, err); } EXPORT_SYMBOL_GPL(iscsi_conn_failure); @@ -1905,6 +1938,7 @@ struct Scsi_Host *iscsi_host_alloc(struct scsi_host_template *sht, int dd_data_size, uint16_t qdepth) { struct Scsi_Host *shost; + struct iscsi_host *ihost; shost = scsi_host_alloc(sht, sizeof(struct iscsi_host) + dd_data_size); if (!shost) @@ -1919,22 +1953,43 @@ struct Scsi_Host *iscsi_host_alloc(struct scsi_host_template *sht, qdepth = ISCSI_DEF_CMD_PER_LUN; } shost->cmd_per_lun = qdepth; + + ihost = shost_priv(shost); + spin_lock_init(&ihost->lock); + ihost->state = ISCSI_HOST_SETUP; + ihost->num_sessions = 0; + init_waitqueue_head(&ihost->session_removal_wq); return shost; } EXPORT_SYMBOL_GPL(iscsi_host_alloc); +static void iscsi_notify_host_removed(struct iscsi_cls_session *cls_session) +{ + iscsi_session_failure(cls_session, ISCSI_ERR_INVALID_HOST); +} + /** * iscsi_host_remove - remove host and sessions * @shost: scsi host * - * This will also remove any sessions attached to the host, but if userspace - * is managing the session at the same time this will break. TODO: add - * refcounting to the netlink iscsi interface so a rmmod or host hot unplug - * does not remove the memory from under us. + * If there are any sessions left, this will initiate the removal and wait + * for the completion. */ void iscsi_host_remove(struct Scsi_Host *shost) { - iscsi_host_for_each_session(shost, iscsi_session_teardown); + struct iscsi_host *ihost = shost_priv(shost); + unsigned long flags; + + spin_lock_irqsave(&ihost->lock, flags); + ihost->state = ISCSI_HOST_REMOVED; + spin_unlock_irqrestore(&ihost->lock, flags); + + iscsi_host_for_each_session(shost, iscsi_notify_host_removed); + wait_event_interruptible(ihost->session_removal_wq, + ihost->num_sessions == 0); + if (signal_pending(current)) + flush_signals(current); + scsi_remove_host(shost); } EXPORT_SYMBOL_GPL(iscsi_host_remove); @@ -1950,6 +2005,27 @@ void iscsi_host_free(struct Scsi_Host *shost) } EXPORT_SYMBOL_GPL(iscsi_host_free); +static void iscsi_host_dec_session_cnt(struct Scsi_Host *shost) +{ + struct iscsi_host *ihost = shost_priv(shost); + unsigned long flags; + + shost = scsi_host_get(shost); + if (!shost) { + printk(KERN_ERR "Invalid state. Cannot notify host removal " + "of session teardown event because host already " + "removed.\n"); + return; + } + + spin_lock_irqsave(&ihost->lock, flags); + ihost->num_sessions--; + if (ihost->num_sessions == 0) + wake_up(&ihost->session_removal_wq); + spin_unlock_irqrestore(&ihost->lock, flags); + scsi_host_put(shost); +} + /** * iscsi_session_setup - create iscsi cls session and host and session * @iscsit: iscsi transport template @@ -1970,9 +2046,19 @@ iscsi_session_setup(struct iscsi_transport *iscsit, struct Scsi_Host *shost, uint16_t cmds_max, int cmd_task_size, uint32_t initial_cmdsn, unsigned int id) { + struct iscsi_host *ihost = shost_priv(shost); struct iscsi_session *session; struct iscsi_cls_session *cls_session; int cmd_i, scsi_cmds, total_cmds = cmds_max; + unsigned long flags; + + spin_lock_irqsave(&ihost->lock, flags); + if (ihost->state == ISCSI_HOST_REMOVED) { + spin_unlock_irqrestore(&ihost->lock, flags); + return NULL; + } + ihost->num_sessions++; + spin_unlock_irqrestore(&ihost->lock, flags); if (!total_cmds) total_cmds = ISCSI_DEF_XMIT_CMDS_MAX; @@ -1985,7 +2071,7 @@ iscsi_session_setup(struct iscsi_transport *iscsit, struct Scsi_Host *shost, printk(KERN_ERR "iscsi: invalid can_queue of %d. can_queue " "must be a power of two that is at least %d.\n", total_cmds, ISCSI_TOTAL_CMDS_MIN); - return NULL; + goto dec_session_count; } if (total_cmds > ISCSI_TOTAL_CMDS_MAX) { @@ -2009,7 +2095,7 @@ iscsi_session_setup(struct iscsi_transport *iscsit, struct Scsi_Host *shost, cls_session = iscsi_alloc_session(shost, iscsit, sizeof(struct iscsi_session)); if (!cls_session) - return NULL; + goto dec_session_count; session = cls_session->dd_data; session->cls_session = cls_session; session->host = shost; @@ -2048,6 +2134,7 @@ iscsi_session_setup(struct iscsi_transport *iscsit, struct Scsi_Host *shost, if (iscsi_add_session(cls_session, id)) goto cls_session_fail; + return cls_session; cls_session_fail: @@ -2056,6 +2143,8 @@ module_get_fail: iscsi_pool_free(&session->cmdpool); cmdpool_alloc_fail: iscsi_free_session(cls_session); +dec_session_count: + iscsi_host_dec_session_cnt(shost); return NULL; } EXPORT_SYMBOL_GPL(iscsi_session_setup); @@ -2071,6 +2160,7 @@ void iscsi_session_teardown(struct iscsi_cls_session *cls_session) { struct iscsi_session *session = cls_session->dd_data; struct module *owner = cls_session->transport->owner; + struct Scsi_Host *shost = session->host; iscsi_pool_free(&session->cmdpool); @@ -2083,6 +2173,7 @@ void iscsi_session_teardown(struct iscsi_cls_session *cls_session) kfree(session->ifacename); iscsi_destroy_session(cls_session); + iscsi_host_dec_session_cnt(shost); module_put(owner); } EXPORT_SYMBOL_GPL(iscsi_session_teardown); diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index 4255b36ff96..db7ea3bb4e8 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -353,7 +353,7 @@ void qla4xxx_mark_device_missing(struct scsi_qla_host *ha, ha->host_no, ddb_entry->bus, ddb_entry->target, ddb_entry->fw_ddb_index)); iscsi_block_session(ddb_entry->sess); - iscsi_conn_error(ddb_entry->conn, ISCSI_ERR_CONN_FAILED); + iscsi_conn_error_event(ddb_entry->conn, ISCSI_ERR_CONN_FAILED); } static struct srb* qla4xxx_get_new_srb(struct scsi_qla_host *ha, diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index cbaae48f47e..f9e45f83e46 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -1010,7 +1010,7 @@ int iscsi_recv_pdu(struct iscsi_cls_conn *conn, struct iscsi_hdr *hdr, skb = alloc_skb(len, GFP_ATOMIC); if (!skb) { - iscsi_conn_error(conn, ISCSI_ERR_CONN_FAILED); + iscsi_conn_error_event(conn, ISCSI_ERR_CONN_FAILED); iscsi_cls_conn_printk(KERN_ERR, conn, "can not deliver " "control PDU: OOM\n"); return -ENOMEM; @@ -1031,7 +1031,7 @@ int iscsi_recv_pdu(struct iscsi_cls_conn *conn, struct iscsi_hdr *hdr, } EXPORT_SYMBOL_GPL(iscsi_recv_pdu); -void iscsi_conn_error(struct iscsi_cls_conn *conn, enum iscsi_err error) +void iscsi_conn_error_event(struct iscsi_cls_conn *conn, enum iscsi_err error) { struct nlmsghdr *nlh; struct sk_buff *skb; @@ -1063,7 +1063,7 @@ void iscsi_conn_error(struct iscsi_cls_conn *conn, enum iscsi_err error) iscsi_cls_conn_printk(KERN_INFO, conn, "detected conn error (%d)\n", error); } -EXPORT_SYMBOL_GPL(iscsi_conn_error); +EXPORT_SYMBOL_GPL(iscsi_conn_error_event); static int iscsi_if_send_reply(int pid, int seq, int type, int done, int multi, -- cgit v1.2.3 From 21536062d98938dfcfbae593a26c154e359749dc Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Wed, 24 Sep 2008 11:46:11 -0500 Subject: [SCSI] iscsi class: fix endpoint id handling Some endpoint code was using unsigned int and some was using uint64_t. This converts it all to uint64_t. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_iscsi.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index f9e45f83e46..4a803ebaf50 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -138,7 +138,7 @@ static ssize_t show_ep_handle(struct device *dev, struct device_attribute *attr, char *buf) { struct iscsi_endpoint *ep = iscsi_dev_to_endpoint(dev); - return sprintf(buf, "%u\n", ep->id); + return sprintf(buf, "%llu\n", (unsigned long long) ep->id); } static ISCSI_ATTR(ep, handle, S_IRUGO, show_ep_handle, NULL); @@ -156,7 +156,7 @@ static struct attribute_group iscsi_endpoint_group = { static int iscsi_match_epid(struct device *dev, void *data) { struct iscsi_endpoint *ep = iscsi_dev_to_endpoint(dev); - unsigned int *epid = (unsigned int *) data; + uint64_t *epid = (uint64_t *) data; return *epid == ep->id; } @@ -166,7 +166,7 @@ iscsi_create_endpoint(int dd_size) { struct device *dev; struct iscsi_endpoint *ep; - unsigned int id; + uint64_t id; int err; for (id = 1; id < ISCSI_MAX_EPID; id++) { @@ -187,7 +187,8 @@ iscsi_create_endpoint(int dd_size) ep->id = id; ep->dev.class = &iscsi_endpoint_class; - snprintf(ep->dev.bus_id, BUS_ID_SIZE, "ep-%u", id); + snprintf(ep->dev.bus_id, BUS_ID_SIZE, "ep-%llu", + (unsigned long long) id); err = device_register(&ep->dev); if (err) goto free_ep; -- cgit v1.2.3 From 8e12452549ba2dfa17db97bc495172fac221a7ab Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Wed, 24 Sep 2008 11:46:12 -0500 Subject: [SCSI] libiscsi: rename host reset to target reset I had this in my patchset to add target reset support, but it got dropped due to patching conflicts. This initial patch just renames the function and users. We are actually just dropping the session, and so this does not have anything to do with the host exactly. It does for software iscsi because we allocate a host per session, but for cxgb3i this makes no sense. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/iscsi_tcp.c | 2 +- drivers/scsi/libiscsi.c | 10 +++++----- 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 752f42884cc..4f096de8152 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -1909,7 +1909,7 @@ static struct scsi_host_template iscsi_sht = { .cmd_per_lun = ISCSI_DEF_CMD_PER_LUN, .eh_abort_handler = iscsi_eh_abort, .eh_device_reset_handler= iscsi_eh_device_reset, - .eh_host_reset_handler = iscsi_eh_host_reset, + .eh_target_reset_handler= iscsi_eh_target_reset, .use_clustering = DISABLE_CLUSTERING, .slave_configure = iscsi_tcp_slave_configure, .proc_name = "iscsi_tcp", diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 390781894be..e3e57cce488 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1367,7 +1367,7 @@ void iscsi_session_recovery_timedout(struct iscsi_cls_session *cls_session) } EXPORT_SYMBOL_GPL(iscsi_session_recovery_timedout); -int iscsi_eh_host_reset(struct scsi_cmnd *sc) +int iscsi_eh_target_reset(struct scsi_cmnd *sc) { struct iscsi_cls_session *cls_session; struct iscsi_session *session; @@ -1381,7 +1381,7 @@ int iscsi_eh_host_reset(struct scsi_cmnd *sc) spin_lock_bh(&session->lock); if (session->state == ISCSI_STATE_TERMINATE) { failed: - debug_scsi("failing host reset: session terminated " + debug_scsi("failing target reset: session terminated " "[CID %d age %d]\n", conn->id, session->age); spin_unlock_bh(&session->lock); mutex_unlock(&session->eh_mutex); @@ -1396,7 +1396,7 @@ failed: */ iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); - debug_scsi("iscsi_eh_host_reset wait for relogin\n"); + debug_scsi("iscsi_eh_target_reset wait for relogin\n"); wait_event_interruptible(conn->ehwait, session->state == ISCSI_STATE_TERMINATE || session->state == ISCSI_STATE_LOGGED_IN || @@ -1408,14 +1408,14 @@ failed: spin_lock_bh(&session->lock); if (session->state == ISCSI_STATE_LOGGED_IN) iscsi_session_printk(KERN_INFO, session, - "host reset succeeded\n"); + "target reset succeeded\n"); else goto failed; spin_unlock_bh(&session->lock); mutex_unlock(&session->eh_mutex); return SUCCESS; } -EXPORT_SYMBOL_GPL(iscsi_eh_host_reset); +EXPORT_SYMBOL_GPL(iscsi_eh_target_reset); static void iscsi_tmf_timedout(unsigned long data) { -- cgit v1.2.3 From 6f481e3cefeb33094e87af176587e6a3027f104e Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Wed, 24 Sep 2008 11:46:13 -0500 Subject: [SCSI] iscsi_tcp: return a descriptive error value during connection errors The segment->done functions return a iscsi error value which gives a lot more info than conn failed, so this patch has us return that value. I also add a new one for xmit failures. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/iscsi_tcp.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 4f096de8152..ed6c54cae7b 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -979,7 +979,7 @@ iscsi_tcp_recv(read_descriptor_t *rd_desc, struct sk_buff *skb, error: debug_tcp("Error receiving PDU, errno=%d\n", rc); - iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); + iscsi_conn_failure(conn, rc); return 0; } @@ -1098,8 +1098,10 @@ iscsi_xmit(struct iscsi_conn *conn) while (1) { rc = iscsi_tcp_xmit_segment(tcp_conn, segment); - if (rc < 0) + if (rc < 0) { + rc = ISCSI_ERR_XMIT_FAILED; goto error; + } if (rc == 0) break; @@ -1108,7 +1110,7 @@ iscsi_xmit(struct iscsi_conn *conn) if (segment->total_copied >= segment->total_size) { if (segment->done != NULL) { rc = segment->done(tcp_conn, segment); - if (rc < 0) + if (rc != 0) goto error; } } @@ -1123,8 +1125,8 @@ error: /* Transmit error. We could initiate error recovery * here. */ debug_tcp("Error sending PDU, errno=%d\n", rc); - iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); - return rc; + iscsi_conn_failure(conn, rc); + return -EIO; } /** -- cgit v1.2.3 From 87cd9eab2dfbdf7d367d7ab30e88176d7b08b83e Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Wed, 24 Sep 2008 11:46:14 -0500 Subject: libiscsi: check reason why we are stopping iscsi session to determine error value Some wires got crossed on some patches and I messed up in the code below when rebuilding a patch. We want to be checking if flag equaled the value indicating if we killing the session due to final logout or if we just trying to relogin. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/libiscsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index e3e57cce488..5aa0db15043 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -2453,7 +2453,7 @@ static void iscsi_start_session_recovery(struct iscsi_session *session, * flush queues. */ spin_lock_bh(&session->lock); - if (STOP_CONN_RECOVER) + if (flag == STOP_CONN_RECOVER) fail_all_commands(conn, -1, DID_TRANSPORT_DISRUPTED); else fail_all_commands(conn, -1, DID_ERROR); -- cgit v1.2.3 From a343914831a8e29d89af3b26495ab1136a9e3153 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Wed, 24 Sep 2008 11:46:15 -0500 Subject: libiscsi: fix locking in iscsi_eh_device_reset We must be using the bh spin locking functions in iscsi_eh_device_reset becuase the session lock interacts with a thread and softirq. This patch also fixes up a bogus comment and check in fail_command, because no one drops the lock (bnx2i did but it is not going upstream yet and there were other refcount changes for that). Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/libiscsi.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 5aa0db15043..801c7cf54d2 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -404,11 +404,6 @@ static void fail_command(struct iscsi_conn *conn, struct iscsi_task *task, conn->session->queued_cmdsn--; else conn->session->tt->cleanup_task(conn, task); - /* - * Check if cleanup_task dropped the lock and the command completed, - */ - if (!task->sc) - return; sc->result = err; if (!scsi_bidi_cmnd(sc)) @@ -1829,10 +1824,10 @@ int iscsi_eh_device_reset(struct scsi_cmnd *sc) iscsi_suspend_tx(conn); - spin_lock(&session->lock); + spin_lock_bh(&session->lock); fail_all_commands(conn, sc->device->lun, DID_ERROR); conn->tmf_state = TMF_INITIAL; - spin_unlock(&session->lock); + spin_unlock_bh(&session->lock); iscsi_start_tx(conn); goto done; -- cgit v1.2.3 From 4c393e6e457fb41169dd110c1b96a138394c2d7b Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Mon, 13 Oct 2008 15:20:06 -0400 Subject: [SCSI] sd: fix compile failure with CONFIG_BLK_DEV_INTEGRITY=n Signed-off-by: James Bottomley --- drivers/scsi/sd.h | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h index a92b991d98a..75638e7d3f6 100644 --- a/drivers/scsi/sd.h +++ b/drivers/scsi/sd.h @@ -97,7 +97,7 @@ struct sd_dif_tuple { __be32 ref_tag; /* Target LBA or indirect LBA */ }; -#if defined(CONFIG_BLK_DEV_INTEGRITY) +#ifdef CONFIG_BLK_DEV_INTEGRITY extern void sd_dif_op(struct scsi_cmnd *, unsigned int, unsigned int, unsigned int); extern void sd_dif_config_host(struct scsi_disk *); @@ -106,10 +106,19 @@ extern void sd_dif_complete(struct scsi_cmnd *, unsigned int); #else /* CONFIG_BLK_DEV_INTEGRITY */ -#define sd_dif_op(a, b, c) do { } while (0) -#define sd_dif_config_host(a) do { } while (0) -#define sd_dif_prepare(a, b, c) (0) -#define sd_dif_complete(a, b) (0) +static inline void sd_dif_op(struct scsi_cmnd *cmd, unsigned int a, unsigned int b, unsigned int c) +{ +} +static inline void sd_dif_config_host(struct scsi_disk *disk) +{ +} +static inline int sd_dif_prepare(struct request *rq, sector_t s, unsigned int a) +{ + return 0; +} +static inline void sd_dif_complete(struct scsi_cmnd *cmd, unsigned int a) +{ +} #endif /* CONFIG_BLK_DEV_INTEGRITY */ -- cgit v1.2.3