From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/serial/amba-pl011.c | 869 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 869 insertions(+) create mode 100644 drivers/serial/amba-pl011.c (limited to 'drivers/serial/amba-pl011.c') diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c new file mode 100644 index 00000000000..ff658a830f3 --- /dev/null +++ b/drivers/serial/amba-pl011.c @@ -0,0 +1,869 @@ +/* + * linux/drivers/char/amba.c + * + * Driver for AMBA serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright 1999 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * $Id: amba.c,v 1.41 2002/07/28 10:03:27 rmk Exp $ + * + * This is a generic driver for ARM AMBA-type serial ports. They + * have a lot of 16550-like features, but are not register compatible. + * Note that although they do have CTS, DCD and DSR inputs, they do + * not have an RI input, nor do they have DTR or RTS outputs. If + * required, these have to be supplied via some other means (eg, GPIO) + * and hooked into this driver. + */ +#include + +#if defined(CONFIG_SERIAL_AMBA_PL011_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#define UART_NR 14 + +#define SERIAL_AMBA_MAJOR 204 +#define SERIAL_AMBA_MINOR 64 +#define SERIAL_AMBA_NR UART_NR + +#define AMBA_ISR_PASS_LIMIT 256 + +#define UART_DUMMY_RSR_RX 256 + +/* + * We wrap our port structure around the generic uart_port. + */ +struct uart_amba_port { + struct uart_port port; + struct clk *clk; + unsigned int im; /* interrupt mask */ + unsigned int old_status; +}; + +static void pl011_stop_tx(struct uart_port *port, unsigned int tty_stop) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + + uap->im &= ~UART011_TXIM; + writew(uap->im, uap->port.membase + UART011_IMSC); +} + +static void pl011_start_tx(struct uart_port *port, unsigned int tty_start) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + + uap->im |= UART011_TXIM; + writew(uap->im, uap->port.membase + UART011_IMSC); +} + +static void pl011_stop_rx(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + + uap->im &= ~(UART011_RXIM|UART011_RTIM|UART011_FEIM| + UART011_PEIM|UART011_BEIM|UART011_OEIM); + writew(uap->im, uap->port.membase + UART011_IMSC); +} + +static void pl011_enable_ms(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + + uap->im |= UART011_RIMIM|UART011_CTSMIM|UART011_DCDMIM|UART011_DSRMIM; + writew(uap->im, uap->port.membase + UART011_IMSC); +} + +static void +#ifdef SUPPORT_SYSRQ +pl011_rx_chars(struct uart_amba_port *uap, struct pt_regs *regs) +#else +pl011_rx_chars(struct uart_amba_port *uap) +#endif +{ + struct tty_struct *tty = uap->port.info->tty; + unsigned int status, ch, flag, rsr, max_count = 256; + + status = readw(uap->port.membase + UART01x_FR); + while ((status & UART01x_FR_RXFE) == 0 && max_count--) { + if (tty->flip.count >= TTY_FLIPBUF_SIZE) { + if (tty->low_latency) + tty_flip_buffer_push(tty); + /* + * If this failed then we will throw away the + * bytes but must do so to clear interrupts + */ + } + + ch = readw(uap->port.membase + UART01x_DR); + flag = TTY_NORMAL; + uap->port.icount.rx++; + + /* + * Note that the error handling code is + * out of the main execution path + */ + rsr = readw(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX; + if (rsr & UART01x_RSR_ANY) { + if (rsr & UART01x_RSR_BE) { + rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE); + uap->port.icount.brk++; + if (uart_handle_break(&uap->port)) + goto ignore_char; + } else if (rsr & UART01x_RSR_PE) + uap->port.icount.parity++; + else if (rsr & UART01x_RSR_FE) + uap->port.icount.frame++; + if (rsr & UART01x_RSR_OE) + uap->port.icount.overrun++; + + rsr &= uap->port.read_status_mask; + + if (rsr & UART01x_RSR_BE) + flag = TTY_BREAK; + else if (rsr & UART01x_RSR_PE) + flag = TTY_PARITY; + else if (rsr & UART01x_RSR_FE) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(&uap->port, ch, regs)) + goto ignore_char; + + if ((rsr & uap->port.ignore_status_mask) == 0) { + tty_insert_flip_char(tty, ch, flag); + } + if ((rsr & UART01x_RSR_OE) && + tty->flip.count < TTY_FLIPBUF_SIZE) { + /* + * Overrun is special, since it's reported + * immediately, and doesn't affect the current + * character + */ + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + ignore_char: + status = readw(uap->port.membase + UART01x_FR); + } + tty_flip_buffer_push(tty); + return; +} + +static void pl011_tx_chars(struct uart_amba_port *uap) +{ + struct circ_buf *xmit = &uap->port.info->xmit; + int count; + + if (uap->port.x_char) { + writew(uap->port.x_char, uap->port.membase + UART01x_DR); + uap->port.icount.tx++; + uap->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&uap->port)) { + pl011_stop_tx(&uap->port, 0); + return; + } + + count = uap->port.fifosize >> 1; + do { + writew(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + uap->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&uap->port); + + if (uart_circ_empty(xmit)) + pl011_stop_tx(&uap->port, 0); +} + +static void pl011_modem_status(struct uart_amba_port *uap) +{ + unsigned int status, delta; + + status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; + + delta = status ^ uap->old_status; + uap->old_status = status; + + if (!delta) + return; + + if (delta & UART01x_FR_DCD) + uart_handle_dcd_change(&uap->port, status & UART01x_FR_DCD); + + if (delta & UART01x_FR_DSR) + uap->port.icount.dsr++; + + if (delta & UART01x_FR_CTS) + uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS); + + wake_up_interruptible(&uap->port.info->delta_msr_wait); +} + +static irqreturn_t pl011_int(int irq, void *dev_id, struct pt_regs *regs) +{ + struct uart_amba_port *uap = dev_id; + unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT; + int handled = 0; + + spin_lock(&uap->port.lock); + + status = readw(uap->port.membase + UART011_MIS); + if (status) { + do { + writew(status & ~(UART011_TXIS|UART011_RTIS| + UART011_RXIS), + uap->port.membase + UART011_ICR); + + if (status & (UART011_RTIS|UART011_RXIS)) +#ifdef SUPPORT_SYSRQ + pl011_rx_chars(uap, regs); +#else + pl011_rx_chars(uap); +#endif + if (status & (UART011_DSRMIS|UART011_DCDMIS| + UART011_CTSMIS|UART011_RIMIS)) + pl011_modem_status(uap); + if (status & UART011_TXIS) + pl011_tx_chars(uap); + + if (pass_counter-- == 0) + break; + + status = readw(uap->port.membase + UART011_MIS); + } while (status != 0); + handled = 1; + } + + spin_unlock(&uap->port.lock); + + return IRQ_RETVAL(handled); +} + +static unsigned int pl01x_tx_empty(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int status = readw(uap->port.membase + UART01x_FR); + return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT; +} + +static unsigned int pl01x_get_mctrl(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int result = 0; + unsigned int status = readw(uap->port.membase + UART01x_FR); + +#define BIT(uartbit, tiocmbit) \ + if (status & uartbit) \ + result |= tiocmbit + + BIT(UART01x_FR_DCD, TIOCM_CAR); + BIT(UART01x_FR_DSR, TIOCM_DSR); + BIT(UART01x_FR_CTS, TIOCM_CTS); + BIT(UART011_FR_RI, TIOCM_RNG); +#undef BIT + return result; +} + +static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int cr; + + cr = readw(uap->port.membase + UART011_CR); + +#define BIT(tiocmbit, uartbit) \ + if (mctrl & tiocmbit) \ + cr |= uartbit; \ + else \ + cr &= ~uartbit + + BIT(TIOCM_RTS, UART011_CR_RTS); + BIT(TIOCM_DTR, UART011_CR_DTR); + BIT(TIOCM_OUT1, UART011_CR_OUT1); + BIT(TIOCM_OUT2, UART011_CR_OUT2); + BIT(TIOCM_LOOP, UART011_CR_LBE); +#undef BIT + + writew(cr, uap->port.membase + UART011_CR); +} + +static void pl011_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned long flags; + unsigned int lcr_h; + + spin_lock_irqsave(&uap->port.lock, flags); + lcr_h = readw(uap->port.membase + UART011_LCRH); + if (break_state == -1) + lcr_h |= UART01x_LCRH_BRK; + else + lcr_h &= ~UART01x_LCRH_BRK; + writew(lcr_h, uap->port.membase + UART011_LCRH); + spin_unlock_irqrestore(&uap->port.lock, flags); +} + +static int pl011_startup(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int cr; + int retval; + + /* + * Try to enable the clock producer. + */ + retval = clk_enable(uap->clk); + if (retval) + goto out; + + uap->port.uartclk = clk_get_rate(uap->clk); + + /* + * Allocate the IRQ + */ + retval = request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap); + if (retval) + goto clk_dis; + + writew(UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, + uap->port.membase + UART011_IFLS); + + /* + * Provoke TX FIFO interrupt into asserting. + */ + cr = UART01x_CR_UARTEN | UART011_CR_TXE | UART011_CR_LBE; + writew(cr, uap->port.membase + UART011_CR); + writew(0, uap->port.membase + UART011_FBRD); + writew(1, uap->port.membase + UART011_IBRD); + writew(0, uap->port.membase + UART011_LCRH); + writew(0, uap->port.membase + UART01x_DR); + while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY) + barrier(); + + cr = UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE; + writew(cr, uap->port.membase + UART011_CR); + + /* + * initialise the old status of the modem signals + */ + uap->old_status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; + + /* + * Finally, enable interrupts + */ + spin_lock_irq(&uap->port.lock); + uap->im = UART011_RXIM | UART011_RTIM; + writew(uap->im, uap->port.membase + UART011_IMSC); + spin_unlock_irq(&uap->port.lock); + + return 0; + + clk_dis: + clk_disable(uap->clk); + out: + return retval; +} + +static void pl011_shutdown(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned long val; + + /* + * disable all interrupts + */ + spin_lock_irq(&uap->port.lock); + uap->im = 0; + writew(uap->im, uap->port.membase + UART011_IMSC); + writew(0xffff, uap->port.membase + UART011_ICR); + spin_unlock_irq(&uap->port.lock); + + /* + * Free the interrupt + */ + free_irq(uap->port.irq, uap); + + /* + * disable the port + */ + writew(UART01x_CR_UARTEN | UART011_CR_TXE, uap->port.membase + UART011_CR); + + /* + * disable break condition and fifos + */ + val = readw(uap->port.membase + UART011_LCRH); + val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN); + writew(val, uap->port.membase + UART011_LCRH); + + /* + * Shut down the clock producer + */ + clk_disable(uap->clk); +} + +static void +pl011_set_termios(struct uart_port *port, struct termios *termios, + struct termios *old) +{ + unsigned int lcr_h, old_cr; + unsigned long flags; + unsigned int baud, quot; + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = port->uartclk * 4 / baud; + + switch (termios->c_cflag & CSIZE) { + case CS5: + lcr_h = UART01x_LCRH_WLEN_5; + break; + case CS6: + lcr_h = UART01x_LCRH_WLEN_6; + break; + case CS7: + lcr_h = UART01x_LCRH_WLEN_7; + break; + default: // CS8 + lcr_h = UART01x_LCRH_WLEN_8; + break; + } + if (termios->c_cflag & CSTOPB) + lcr_h |= UART01x_LCRH_STP2; + if (termios->c_cflag & PARENB) { + lcr_h |= UART01x_LCRH_PEN; + if (!(termios->c_cflag & PARODD)) + lcr_h |= UART01x_LCRH_EPS; + } + if (port->fifosize > 1) + lcr_h |= UART01x_LCRH_FEN; + + spin_lock_irqsave(&port->lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + port->read_status_mask = UART01x_RSR_OE; + if (termios->c_iflag & INPCK) + port->read_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE; + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= UART01x_RSR_BE; + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= UART01x_RSR_BE; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= UART01x_RSR_OE; + } + + /* + * Ignore all characters if CREAD is not set. + */ + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= UART_DUMMY_RSR_RX; + + if (UART_ENABLE_MS(port, termios->c_cflag)) + pl011_enable_ms(port); + + /* first, disable everything */ + old_cr = readw(port->membase + UART011_CR); + writew(0, port->membase + UART011_CR); + + /* Set baud rate */ + writew(quot & 0x3f, port->membase + UART011_FBRD); + writew(quot >> 6, port->membase + UART011_IBRD); + + /* + * ----------v----------v----------v----------v----- + * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L + * ----------^----------^----------^----------^----- + */ + writew(lcr_h, port->membase + UART011_LCRH); + writew(old_cr, port->membase + UART011_CR); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *pl011_type(struct uart_port *port) +{ + return port->type == PORT_AMBA ? "AMBA/PL011" : NULL; +} + +/* + * Release the memory region(s) being used by 'port' + */ +static void pl010_release_port(struct uart_port *port) +{ + release_mem_region(port->mapbase, SZ_4K); +} + +/* + * Request the memory region(s) being used by 'port' + */ +static int pl010_request_port(struct uart_port *port) +{ + return request_mem_region(port->mapbase, SZ_4K, "uart-pl011") + != NULL ? 0 : -EBUSY; +} + +/* + * Configure/autoconfigure the port. + */ +static void pl010_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_AMBA; + pl010_request_port(port); + } +} + +/* + * verify the new serial_struct (for TIOCSSERIAL). + */ +static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + int ret = 0; + if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA) + ret = -EINVAL; + if (ser->irq < 0 || ser->irq >= NR_IRQS) + ret = -EINVAL; + if (ser->baud_base < 9600) + ret = -EINVAL; + return ret; +} + +static struct uart_ops amba_pl011_pops = { + .tx_empty = pl01x_tx_empty, + .set_mctrl = pl011_set_mctrl, + .get_mctrl = pl01x_get_mctrl, + .stop_tx = pl011_stop_tx, + .start_tx = pl011_start_tx, + .stop_rx = pl011_stop_rx, + .enable_ms = pl011_enable_ms, + .break_ctl = pl011_break_ctl, + .startup = pl011_startup, + .shutdown = pl011_shutdown, + .set_termios = pl011_set_termios, + .type = pl011_type, + .release_port = pl010_release_port, + .request_port = pl010_request_port, + .config_port = pl010_config_port, + .verify_port = pl010_verify_port, +}; + +static struct uart_amba_port *amba_ports[UART_NR]; + +#ifdef CONFIG_SERIAL_AMBA_PL011_CONSOLE + +static inline void +pl011_console_write_char(struct uart_amba_port *uap, char ch) +{ + unsigned int status; + + do { + status = readw(uap->port.membase + UART01x_FR); + } while (status & UART01x_FR_TXFF); + writew(ch, uap->port.membase + UART01x_DR); +} + +static void +pl011_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_amba_port *uap = amba_ports[co->index]; + unsigned int status, old_cr, new_cr; + int i; + + clk_enable(uap->clk); + + /* + * First save the CR then disable the interrupts + */ + old_cr = readw(uap->port.membase + UART011_CR); + new_cr = old_cr & ~UART011_CR_CTSEN; + new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE; + writew(new_cr, uap->port.membase + UART011_CR); + + /* + * Now, do each character + */ + for (i = 0; i < count; i++) { + pl011_console_write_char(uap, s[i]); + if (s[i] == '\n') + pl011_console_write_char(uap, '\r'); + } + + /* + * Finally, wait for transmitter to become empty + * and restore the TCR + */ + do { + status = readw(uap->port.membase + UART01x_FR); + } while (status & UART01x_FR_BUSY); + writew(old_cr, uap->port.membase + UART011_CR); + + clk_disable(uap->clk); +} + +static void __init +pl011_console_get_options(struct uart_amba_port *uap, int *baud, + int *parity, int *bits) +{ + if (readw(uap->port.membase + UART011_CR) & UART01x_CR_UARTEN) { + unsigned int lcr_h, ibrd, fbrd; + + lcr_h = readw(uap->port.membase + UART011_LCRH); + + *parity = 'n'; + if (lcr_h & UART01x_LCRH_PEN) { + if (lcr_h & UART01x_LCRH_EPS) + *parity = 'e'; + else + *parity = 'o'; + } + + if ((lcr_h & 0x60) == UART01x_LCRH_WLEN_7) + *bits = 7; + else + *bits = 8; + + ibrd = readw(uap->port.membase + UART011_IBRD); + fbrd = readw(uap->port.membase + UART011_FBRD); + + *baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd); + } +} + +static int __init pl011_console_setup(struct console *co, char *options) +{ + struct uart_amba_port *uap; + int baud = 38400; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= UART_NR) + co->index = 0; + uap = amba_ports[co->index]; + + uap->port.uartclk = clk_get_rate(uap->clk); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + pl011_console_get_options(uap, &baud, &parity, &bits); + + return uart_set_options(&uap->port, co, baud, parity, bits, flow); +} + +extern struct uart_driver amba_reg; +static struct console amba_console = { + .name = "ttyAMA", + .write = pl011_console_write, + .device = uart_console_device, + .setup = pl011_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &amba_reg, +}; + +#define AMBA_CONSOLE (&amba_console) +#else +#define AMBA_CONSOLE NULL +#endif + +static struct uart_driver amba_reg = { + .owner = THIS_MODULE, + .driver_name = "ttyAMA", + .dev_name = "ttyAMA", + .major = SERIAL_AMBA_MAJOR, + .minor = SERIAL_AMBA_MINOR, + .nr = UART_NR, + .cons = AMBA_CONSOLE, +}; + +static int pl011_probe(struct amba_device *dev, void *id) +{ + struct uart_amba_port *uap; + void __iomem *base; + int i, ret; + + for (i = 0; i < ARRAY_SIZE(amba_ports); i++) + if (amba_ports[i] == NULL) + break; + + if (i == ARRAY_SIZE(amba_ports)) { + ret = -EBUSY; + goto out; + } + + uap = kmalloc(sizeof(struct uart_amba_port), GFP_KERNEL); + if (uap == NULL) { + ret = -ENOMEM; + goto out; + } + + base = ioremap(dev->res.start, PAGE_SIZE); + if (!base) { + ret = -ENOMEM; + goto free; + } + + memset(uap, 0, sizeof(struct uart_amba_port)); + uap->clk = clk_get(&dev->dev, "UARTCLK"); + if (IS_ERR(uap->clk)) { + ret = PTR_ERR(uap->clk); + goto unmap; + } + + ret = clk_use(uap->clk); + if (ret) + goto putclk; + + uap->port.dev = &dev->dev; + uap->port.mapbase = dev->res.start; + uap->port.membase = base; + uap->port.iotype = UPIO_MEM; + uap->port.irq = dev->irq[0]; + uap->port.fifosize = 16; + uap->port.ops = &amba_pl011_pops; + uap->port.flags = UPF_BOOT_AUTOCONF; + uap->port.line = i; + + amba_ports[i] = uap; + + amba_set_drvdata(dev, uap); + ret = uart_add_one_port(&amba_reg, &uap->port); + if (ret) { + amba_set_drvdata(dev, NULL); + amba_ports[i] = NULL; + clk_unuse(uap->clk); + putclk: + clk_put(uap->clk); + unmap: + iounmap(base); + free: + kfree(uap); + } + out: + return ret; +} + +static int pl011_remove(struct amba_device *dev) +{ + struct uart_amba_port *uap = amba_get_drvdata(dev); + int i; + + amba_set_drvdata(dev, NULL); + + uart_remove_one_port(&amba_reg, &uap->port); + + for (i = 0; i < ARRAY_SIZE(amba_ports); i++) + if (amba_ports[i] == uap) + amba_ports[i] = NULL; + + iounmap(uap->port.membase); + clk_unuse(uap->clk); + clk_put(uap->clk); + kfree(uap); + return 0; +} + +static struct amba_id pl011_ids[] __initdata = { + { + .id = 0x00041011, + .mask = 0x000fffff, + }, + { 0, 0 }, +}; + +static struct amba_driver pl011_driver = { + .drv = { + .name = "uart-pl011", + }, + .id_table = pl011_ids, + .probe = pl011_probe, + .remove = pl011_remove, +}; + +static int __init pl011_init(void) +{ + int ret; + printk(KERN_INFO "Serial: AMBA PL011 UART driver\n"); + + ret = uart_register_driver(&amba_reg); + if (ret == 0) { + ret = amba_driver_register(&pl011_driver); + if (ret) + uart_unregister_driver(&amba_reg); + } + return ret; +} + +static void __exit pl011_exit(void) +{ + amba_driver_unregister(&pl011_driver); + uart_unregister_driver(&amba_reg); +} + +module_init(pl011_init); +module_exit(pl011_exit); + +MODULE_AUTHOR("ARM Ltd/Deep Blue Solutions Ltd"); +MODULE_DESCRIPTION("ARM AMBA serial port driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3