From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/serial/cpm_uart/cpm_uart_cpm1.c | 290 ++++++++++++++++++++++++++++++++ 1 file changed, 290 insertions(+) create mode 100644 drivers/serial/cpm_uart/cpm_uart_cpm1.c (limited to 'drivers/serial/cpm_uart/cpm_uart_cpm1.c') diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c new file mode 100644 index 00000000000..de26cf7b003 --- /dev/null +++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c @@ -0,0 +1,290 @@ +/* + * linux/drivers/serial/cpm_uart.c + * + * Driver for CPM (SCC/SMC) serial ports; CPM1 definitions + * + * Maintainer: Kumar Gala (kumar.gala@freescale.com) (CPM2) + * Pantelis Antoniou (panto@intracom.gr) (CPM1) + * + * Copyright (C) 2004 Freescale Semiconductor, Inc. + * (C) 2004 Intracom, S.A. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#include "cpm_uart.h" + +/**************************************************************/ + +void cpm_line_cr_cmd(int line, int cmd) +{ + ushort val; + volatile cpm8xx_t *cp = cpmp; + + switch (line) { + case UART_SMC1: + val = mk_cr_cmd(CPM_CR_CH_SMC1, cmd) | CPM_CR_FLG; + break; + case UART_SMC2: + val = mk_cr_cmd(CPM_CR_CH_SMC2, cmd) | CPM_CR_FLG; + break; + case UART_SCC1: + val = mk_cr_cmd(CPM_CR_CH_SCC1, cmd) | CPM_CR_FLG; + break; + case UART_SCC2: + val = mk_cr_cmd(CPM_CR_CH_SCC2, cmd) | CPM_CR_FLG; + break; + case UART_SCC3: + val = mk_cr_cmd(CPM_CR_CH_SCC3, cmd) | CPM_CR_FLG; + break; + case UART_SCC4: + val = mk_cr_cmd(CPM_CR_CH_SCC4, cmd) | CPM_CR_FLG; + break; + default: + return; + + } + cp->cp_cpcr = val; + while (cp->cp_cpcr & CPM_CR_FLG) ; +} + +void smc1_lineif(struct uart_cpm_port *pinfo) +{ + volatile cpm8xx_t *cp = cpmp; + unsigned int iobits = 0x000000c0; + + if (!pinfo->is_portb) { + cp->cp_pbpar |= iobits; + cp->cp_pbdir &= ~iobits; + cp->cp_pbodr &= ~iobits; + } else { + ((immap_t *)IMAP_ADDR)->im_ioport.iop_papar |= iobits; + ((immap_t *)IMAP_ADDR)->im_ioport.iop_padir &= ~iobits; + ((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits; + } + + pinfo->brg = 1; +} + +void smc2_lineif(struct uart_cpm_port *pinfo) +{ + /* XXX SMC2: insert port configuration here */ + pinfo->brg = 2; +} + +void scc1_lineif(struct uart_cpm_port *pinfo) +{ + /* XXX SCC1: insert port configuration here */ + pinfo->brg = 1; +} + +void scc2_lineif(struct uart_cpm_port *pinfo) +{ + /* XXX SCC2: insert port configuration here */ + pinfo->brg = 2; +} + +void scc3_lineif(struct uart_cpm_port *pinfo) +{ + /* XXX SCC3: insert port configuration here */ + pinfo->brg = 3; +} + +void scc4_lineif(struct uart_cpm_port *pinfo) +{ + /* XXX SCC4: insert port configuration here */ + pinfo->brg = 4; +} + +/* + * Allocate DP-Ram and memory buffers. We need to allocate a transmit and + * receive buffer descriptors from dual port ram, and a character + * buffer area from host mem. If we are allocating for the console we need + * to do it from bootmem + */ +int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con) +{ + int dpmemsz, memsz; + u8 *dp_mem; + uint dp_offset; + u8 *mem_addr; + dma_addr_t dma_addr = 0; + + pr_debug("CPM uart[%d]:allocbuf\n", pinfo->port.line); + + dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos); + dp_offset = cpm_dpalloc(dpmemsz, 8); + if (IS_DPERR(dp_offset)) { + printk(KERN_ERR + "cpm_uart_cpm1.c: could not allocate buffer descriptors\n"); + return -ENOMEM; + } + dp_mem = cpm_dpram_addr(dp_offset); + + memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) + + L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize); + if (is_con) { + mem_addr = (u8 *) m8xx_cpm_hostalloc(memsz); + dma_addr = 0; + } else + mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr, + GFP_KERNEL); + + if (mem_addr == NULL) { + cpm_dpfree(dp_offset); + printk(KERN_ERR + "cpm_uart_cpm1.c: could not allocate coherent memory\n"); + return -ENOMEM; + } + + pinfo->dp_addr = dp_offset; + pinfo->mem_addr = mem_addr; + pinfo->dma_addr = dma_addr; + + pinfo->rx_buf = mem_addr; + pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos + * pinfo->rx_fifosize); + + pinfo->rx_bd_base = (volatile cbd_t *)dp_mem; + pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos; + + return 0; +} + +void cpm_uart_freebuf(struct uart_cpm_port *pinfo) +{ + dma_free_coherent(NULL, L1_CACHE_ALIGN(pinfo->rx_nrfifos * + pinfo->rx_fifosize) + + L1_CACHE_ALIGN(pinfo->tx_nrfifos * + pinfo->tx_fifosize), pinfo->mem_addr, + pinfo->dma_addr); + + cpm_dpfree(pinfo->dp_addr); +} + +/* Setup any dynamic params in the uart desc */ +int cpm_uart_init_portdesc(void) +{ + pr_debug("CPM uart[-]:init portdesc\n"); + + cpm_uart_nr = 0; +#ifdef CONFIG_SERIAL_CPM_SMC1 + cpm_uart_ports[UART_SMC1].smcp = &cpmp->cp_smc[0]; +/* + * Is SMC1 being relocated? + */ +# ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH + cpm_uart_ports[UART_SMC1].smcup = + (smc_uart_t *) & cpmp->cp_dparam[0x3C0]; +# else + cpm_uart_ports[UART_SMC1].smcup = + (smc_uart_t *) & cpmp->cp_dparam[PROFF_SMC1]; +# endif + cpm_uart_ports[UART_SMC1].port.mapbase = + (unsigned long)&cpmp->cp_smc[0]; + cpm_uart_ports[UART_SMC1].smcp->smc_smcm |= (SMCM_RX | SMCM_TX); + cpm_uart_ports[UART_SMC1].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); + cpm_uart_ports[UART_SMC1].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1; +#endif + +#ifdef CONFIG_SERIAL_CPM_SMC2 + cpm_uart_ports[UART_SMC2].smcp = &cpmp->cp_smc[1]; + cpm_uart_ports[UART_SMC2].smcup = + (smc_uart_t *) & cpmp->cp_dparam[PROFF_SMC2]; + cpm_uart_ports[UART_SMC2].port.mapbase = + (unsigned long)&cpmp->cp_smc[1]; + cpm_uart_ports[UART_SMC2].smcp->smc_smcm |= (SMCM_RX | SMCM_TX); + cpm_uart_ports[UART_SMC2].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); + cpm_uart_ports[UART_SMC2].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2; +#endif + +#ifdef CONFIG_SERIAL_CPM_SCC1 + cpm_uart_ports[UART_SCC1].sccp = &cpmp->cp_scc[0]; + cpm_uart_ports[UART_SCC1].sccup = + (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC1]; + cpm_uart_ports[UART_SCC1].port.mapbase = + (unsigned long)&cpmp->cp_scc[0]; + cpm_uart_ports[UART_SCC1].sccp->scc_sccm &= + ~(UART_SCCM_TX | UART_SCCM_RX); + cpm_uart_ports[UART_SCC1].sccp->scc_gsmrl &= + ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); + cpm_uart_ports[UART_SCC1].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1; +#endif + +#ifdef CONFIG_SERIAL_CPM_SCC2 + cpm_uart_ports[UART_SCC2].sccp = &cpmp->cp_scc[1]; + cpm_uart_ports[UART_SCC2].sccup = + (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC2]; + cpm_uart_ports[UART_SCC2].port.mapbase = + (unsigned long)&cpmp->cp_scc[1]; + cpm_uart_ports[UART_SCC2].sccp->scc_sccm &= + ~(UART_SCCM_TX | UART_SCCM_RX); + cpm_uart_ports[UART_SCC2].sccp->scc_gsmrl &= + ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); + cpm_uart_ports[UART_SCC2].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2; +#endif + +#ifdef CONFIG_SERIAL_CPM_SCC3 + cpm_uart_ports[UART_SCC3].sccp = &cpmp->cp_scc[2]; + cpm_uart_ports[UART_SCC3].sccup = + (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC3]; + cpm_uart_ports[UART_SCC3].port.mapbase = + (unsigned long)&cpmp->cp_scc[2]; + cpm_uart_ports[UART_SCC3].sccp->scc_sccm &= + ~(UART_SCCM_TX | UART_SCCM_RX); + cpm_uart_ports[UART_SCC3].sccp->scc_gsmrl &= + ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); + cpm_uart_ports[UART_SCC3].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3; +#endif + +#ifdef CONFIG_SERIAL_CPM_SCC4 + cpm_uart_ports[UART_SCC4].sccp = &cpmp->cp_scc[3]; + cpm_uart_ports[UART_SCC4].sccup = + (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC4]; + cpm_uart_ports[UART_SCC4].port.mapbase = + (unsigned long)&cpmp->cp_scc[3]; + cpm_uart_ports[UART_SCC4].sccp->scc_sccm &= + ~(UART_SCCM_TX | UART_SCCM_RX); + cpm_uart_ports[UART_SCC4].sccp->scc_gsmrl &= + ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); + cpm_uart_ports[UART_SCC4].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4; +#endif + return 0; +} -- cgit v1.2.3