From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/serial/mcfserial.c | 1883 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1883 insertions(+) create mode 100644 drivers/serial/mcfserial.c (limited to 'drivers/serial/mcfserial.c') diff --git a/drivers/serial/mcfserial.c b/drivers/serial/mcfserial.c new file mode 100644 index 00000000000..8c40167778d --- /dev/null +++ b/drivers/serial/mcfserial.c @@ -0,0 +1,1883 @@ +/* + * mcfserial.c -- serial driver for ColdFire internal UARTS. + * + * Copyright (C) 1999-2003 Greg Ungerer + * Copyright (c) 2000-2001 Lineo, Inc. + * Copyright (C) 2001-2002 SnapGear Inc. + * + * Based on code from 68332serial.c which was: + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 1998 TSHG + * Copyright (c) 1999 Rt-Control Inc. + * + * Changes: + * 08/07/2003 Daniele Bellucci + * some cleanups in mcfrs_write. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "mcfserial.h" + +struct timer_list mcfrs_timer_struct; + +/* + * Default console baud rate, we use this as the default + * for all ports so init can just open /dev/console and + * keep going. Perhaps one day the cflag settings for the + * console can be used instead. + */ +#if defined(CONFIG_ARNEWSH) || defined(CONFIG_MOTOROLA) || defined(CONFIG_senTec) || defined(CONFIG_SNEHA) +#define CONSOLE_BAUD_RATE 19200 +#define DEFAULT_CBAUD B19200 +#endif + +#if defined(CONFIG_HW_FEITH) + #define CONSOLE_BAUD_RATE 38400 + #define DEFAULT_CBAUD B38400 +#endif + +#ifndef CONSOLE_BAUD_RATE +#define CONSOLE_BAUD_RATE 9600 +#define DEFAULT_CBAUD B9600 +#endif + +int mcfrs_console_inited = 0; +int mcfrs_console_port = -1; +int mcfrs_console_baud = CONSOLE_BAUD_RATE; +int mcfrs_console_cbaud = DEFAULT_CBAUD; + +/* + * Driver data structures. + */ +static struct tty_driver *mcfrs_serial_driver; + +/* number of characters left in xmit buffer before we ask for more */ +#define WAKEUP_CHARS 256 + +/* Debugging... + */ +#undef SERIAL_DEBUG_OPEN +#undef SERIAL_DEBUG_FLOW + +#if defined(CONFIG_M527x) || defined(CONFIG_M528x) +#define IRQBASE (MCFINT_VECBASE+MCFINT_UART0) +#else +#define IRQBASE 73 +#endif + +/* + * Configuration table, UARTs to look for at startup. + */ +static struct mcf_serial mcfrs_table[] = { + { /* ttyS0 */ + .magic = 0, + .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE1), + .irq = IRQBASE, + .flags = ASYNC_BOOT_AUTOCONF, + }, + { /* ttyS1 */ + .magic = 0, + .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE2), + .irq = IRQBASE+1, + .flags = ASYNC_BOOT_AUTOCONF, + }, +}; + + +#define NR_PORTS (sizeof(mcfrs_table) / sizeof(struct mcf_serial)) + +/* + * This is used to figure out the divisor speeds and the timeouts. + */ +static int mcfrs_baud_table[] = { + 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, + 9600, 19200, 38400, 57600, 115200, 230400, 460800, 0 +}; +#define MCFRS_BAUD_TABLE_SIZE \ + (sizeof(mcfrs_baud_table)/sizeof(mcfrs_baud_table[0])) + + +#ifdef CONFIG_MAGIC_SYSRQ +/* + * Magic system request keys. Used for debugging... + */ +extern int magic_sysrq_key(int ch); +#endif + + +/* + * Forware declarations... + */ +static void mcfrs_change_speed(struct mcf_serial *info); +static void mcfrs_wait_until_sent(struct tty_struct *tty, int timeout); + + +static inline int serial_paranoia_check(struct mcf_serial *info, + char *name, const char *routine) +{ +#ifdef SERIAL_PARANOIA_CHECK + static const char badmagic[] = + "MCFRS(warning): bad magic number for serial struct %s in %s\n"; + static const char badinfo[] = + "MCFRS(warning): null mcf_serial for %s in %s\n"; + + if (!info) { + printk(badinfo, name, routine); + return 1; + } + if (info->magic != SERIAL_MAGIC) { + printk(badmagic, name, routine); + return 1; + } +#endif + return 0; +} + +/* + * Sets or clears DTR and RTS on the requested line. + */ +static void mcfrs_setsignals(struct mcf_serial *info, int dtr, int rts) +{ + volatile unsigned char *uartp; + unsigned long flags; + +#if 0 + printk("%s(%d): mcfrs_setsignals(info=%x,dtr=%d,rts=%d)\n", + __FILE__, __LINE__, info, dtr, rts); +#endif + + local_irq_save(flags); + if (dtr >= 0) { +#ifdef MCFPP_DTR0 + if (info->line) + mcf_setppdata(MCFPP_DTR1, (dtr ? 0 : MCFPP_DTR1)); + else + mcf_setppdata(MCFPP_DTR0, (dtr ? 0 : MCFPP_DTR0)); +#endif + } + if (rts >= 0) { + uartp = info->addr; + if (rts) { + info->sigs |= TIOCM_RTS; + uartp[MCFUART_UOP1] = MCFUART_UOP_RTS; + } else { + info->sigs &= ~TIOCM_RTS; + uartp[MCFUART_UOP0] = MCFUART_UOP_RTS; + } + } + local_irq_restore(flags); + return; +} + +/* + * Gets values of serial signals. + */ +static int mcfrs_getsignals(struct mcf_serial *info) +{ + volatile unsigned char *uartp; + unsigned long flags; + int sigs; +#if defined(CONFIG_NETtel) && defined(CONFIG_M5307) + unsigned short ppdata; +#endif + +#if 0 + printk("%s(%d): mcfrs_getsignals(info=%x)\n", __FILE__, __LINE__); +#endif + + local_irq_save(flags); + uartp = info->addr; + sigs = (uartp[MCFUART_UIPR] & MCFUART_UIPR_CTS) ? 0 : TIOCM_CTS; + sigs |= (info->sigs & TIOCM_RTS); + +#ifdef MCFPP_DCD0 +{ + unsigned int ppdata; + ppdata = mcf_getppdata(); + if (info->line == 0) { + sigs |= (ppdata & MCFPP_DCD0) ? 0 : TIOCM_CD; + sigs |= (ppdata & MCFPP_DTR0) ? 0 : TIOCM_DTR; + } else if (info->line == 1) { + sigs |= (ppdata & MCFPP_DCD1) ? 0 : TIOCM_CD; + sigs |= (ppdata & MCFPP_DTR1) ? 0 : TIOCM_DTR; + } +} +#endif + + local_irq_restore(flags); + return(sigs); +} + +/* + * ------------------------------------------------------------ + * mcfrs_stop() and mcfrs_start() + * + * This routines are called before setting or resetting tty->stopped. + * They enable or disable transmitter interrupts, as necessary. + * ------------------------------------------------------------ + */ +static void mcfrs_stop(struct tty_struct *tty) +{ + volatile unsigned char *uartp; + struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "mcfrs_stop")) + return; + + local_irq_save(flags); + uartp = info->addr; + info->imr &= ~MCFUART_UIR_TXREADY; + uartp[MCFUART_UIMR] = info->imr; + local_irq_restore(flags); +} + +static void mcfrs_start(struct tty_struct *tty) +{ + volatile unsigned char *uartp; + struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "mcfrs_start")) + return; + + local_irq_save(flags); + if (info->xmit_cnt && info->xmit_buf) { + uartp = info->addr; + info->imr |= MCFUART_UIR_TXREADY; + uartp[MCFUART_UIMR] = info->imr; + } + local_irq_restore(flags); +} + +/* + * ---------------------------------------------------------------------- + * + * Here starts the interrupt handling routines. All of the following + * subroutines are declared as inline and are folded into + * mcfrs_interrupt(). They were separated out for readability's sake. + * + * Note: mcfrs_interrupt() is a "fast" interrupt, which means that it + * runs with interrupts turned off. People who may want to modify + * mcfrs_interrupt() should try to keep the interrupt handler as fast as + * possible. After you are done making modifications, it is not a bad + * idea to do: + * + * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c + * + * and look at the resulting assemble code in serial.s. + * + * - Ted Ts'o (tytso@mit.edu), 7-Mar-93 + * ----------------------------------------------------------------------- + */ + +static inline void receive_chars(struct mcf_serial *info) +{ + volatile unsigned char *uartp; + struct tty_struct *tty = info->tty; + unsigned char status, ch; + + if (!tty) + return; + + uartp = info->addr; + + while ((status = uartp[MCFUART_USR]) & MCFUART_USR_RXREADY) { + + if (tty->flip.count >= TTY_FLIPBUF_SIZE) + break; + + ch = uartp[MCFUART_URB]; + info->stats.rx++; + +#ifdef CONFIG_MAGIC_SYSRQ + if (mcfrs_console_inited && (info->line == mcfrs_console_port)) { + if (magic_sysrq_key(ch)) + continue; + } +#endif + + tty->flip.count++; + if (status & MCFUART_USR_RXERR) { + uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETERR; + if (status & MCFUART_USR_RXBREAK) { + info->stats.rxbreak++; + *tty->flip.flag_buf_ptr++ = TTY_BREAK; + } else if (status & MCFUART_USR_RXPARITY) { + info->stats.rxparity++; + *tty->flip.flag_buf_ptr++ = TTY_PARITY; + } else if (status & MCFUART_USR_RXOVERRUN) { + info->stats.rxoverrun++; + *tty->flip.flag_buf_ptr++ = TTY_OVERRUN; + } else if (status & MCFUART_USR_RXFRAMING) { + info->stats.rxframing++; + *tty->flip.flag_buf_ptr++ = TTY_FRAME; + } else { + /* This should never happen... */ + *tty->flip.flag_buf_ptr++ = 0; + } + } else { + *tty->flip.flag_buf_ptr++ = 0; + } + *tty->flip.char_buf_ptr++ = ch; + } + + schedule_work(&tty->flip.work); + return; +} + +static inline void transmit_chars(struct mcf_serial *info) +{ + volatile unsigned char *uartp; + + uartp = info->addr; + + if (info->x_char) { + /* Send special char - probably flow control */ + uartp[MCFUART_UTB] = info->x_char; + info->x_char = 0; + info->stats.tx++; + } + + if ((info->xmit_cnt <= 0) || info->tty->stopped) { + info->imr &= ~MCFUART_UIR_TXREADY; + uartp[MCFUART_UIMR] = info->imr; + return; + } + + while (uartp[MCFUART_USR] & MCFUART_USR_TXREADY) { + uartp[MCFUART_UTB] = info->xmit_buf[info->xmit_tail++]; + info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); + info->stats.tx++; + if (--info->xmit_cnt <= 0) + break; + } + + if (info->xmit_cnt < WAKEUP_CHARS) + schedule_work(&info->tqueue); + return; +} + +/* + * This is the serial driver's generic interrupt routine + */ +irqreturn_t mcfrs_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct mcf_serial *info; + unsigned char isr; + + info = &mcfrs_table[(irq - IRQBASE)]; + isr = info->addr[MCFUART_UISR] & info->imr; + + if (isr & MCFUART_UIR_RXREADY) + receive_chars(info); + if (isr & MCFUART_UIR_TXREADY) + transmit_chars(info); + return IRQ_HANDLED; +} + +/* + * ------------------------------------------------------------------- + * Here ends the serial interrupt routines. + * ------------------------------------------------------------------- + */ + +static void mcfrs_offintr(void *private) +{ + struct mcf_serial *info = (struct mcf_serial *) private; + struct tty_struct *tty; + + tty = info->tty; + if (!tty) + return; + tty_wakeup(tty); +} + + +/* + * Change of state on a DCD line. + */ +void mcfrs_modem_change(struct mcf_serial *info, int dcd) +{ + if (info->count == 0) + return; + + if (info->flags & ASYNC_CHECK_CD) { + if (dcd) + wake_up_interruptible(&info->open_wait); + else + schedule_work(&info->tqueue_hangup); + } +} + + +#ifdef MCFPP_DCD0 + +unsigned short mcfrs_ppstatus; + +/* + * This subroutine is called when the RS_TIMER goes off. It is used + * to monitor the state of the DCD lines - since they have no edge + * sensors and interrupt generators. + */ +static void mcfrs_timer(void) +{ + unsigned int ppstatus, dcdval, i; + + ppstatus = mcf_getppdata() & (MCFPP_DCD0 | MCFPP_DCD1); + + if (ppstatus != mcfrs_ppstatus) { + for (i = 0; (i < 2); i++) { + dcdval = (i ? MCFPP_DCD1 : MCFPP_DCD0); + if ((ppstatus & dcdval) != (mcfrs_ppstatus & dcdval)) { + mcfrs_modem_change(&mcfrs_table[i], + ((ppstatus & dcdval) ? 0 : 1)); + } + } + } + mcfrs_ppstatus = ppstatus; + + /* Re-arm timer */ + mcfrs_timer_struct.expires = jiffies + HZ/25; + add_timer(&mcfrs_timer_struct); +} + +#endif /* MCFPP_DCD0 */ + + +/* + * This routine is called from the scheduler tqueue when the interrupt + * routine has signalled that a hangup has occurred. The path of + * hangup processing is: + * + * serial interrupt routine -> (scheduler tqueue) -> + * do_serial_hangup() -> tty->hangup() -> mcfrs_hangup() + * + */ +static void do_serial_hangup(void *private) +{ + struct mcf_serial *info = (struct mcf_serial *) private; + struct tty_struct *tty; + + tty = info->tty; + if (!tty) + return; + + tty_hangup(tty); +} + +static int startup(struct mcf_serial * info) +{ + volatile unsigned char *uartp; + unsigned long flags; + + if (info->flags & ASYNC_INITIALIZED) + return 0; + + if (!info->xmit_buf) { + info->xmit_buf = (unsigned char *) __get_free_page(GFP_KERNEL); + if (!info->xmit_buf) + return -ENOMEM; + } + + local_irq_save(flags); + +#ifdef SERIAL_DEBUG_OPEN + printk("starting up ttyS%d (irq %d)...\n", info->line, info->irq); +#endif + + /* + * Reset UART, get it into known state... + */ + uartp = info->addr; + uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */ + uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */ + mcfrs_setsignals(info, 1, 1); + + if (info->tty) + clear_bit(TTY_IO_ERROR, &info->tty->flags); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + + /* + * and set the speed of the serial port + */ + mcfrs_change_speed(info); + + /* + * Lastly enable the UART transmitter and receiver, and + * interrupt enables. + */ + info->imr = MCFUART_UIR_RXREADY; + uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE; + uartp[MCFUART_UIMR] = info->imr; + + info->flags |= ASYNC_INITIALIZED; + local_irq_restore(flags); + return 0; +} + +/* + * This routine will shutdown a serial port; interrupts are disabled, and + * DTR is dropped if the hangup on close termio flag is on. + */ +static void shutdown(struct mcf_serial * info) +{ + volatile unsigned char *uartp; + unsigned long flags; + + if (!(info->flags & ASYNC_INITIALIZED)) + return; + +#ifdef SERIAL_DEBUG_OPEN + printk("Shutting down serial port %d (irq %d)....\n", info->line, + info->irq); +#endif + + local_irq_save(flags); + + uartp = info->addr; + uartp[MCFUART_UIMR] = 0; /* mask all interrupts */ + uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */ + uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */ + + if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) + mcfrs_setsignals(info, 0, 0); + + if (info->xmit_buf) { + free_page((unsigned long) info->xmit_buf); + info->xmit_buf = 0; + } + + if (info->tty) + set_bit(TTY_IO_ERROR, &info->tty->flags); + + info->flags &= ~ASYNC_INITIALIZED; + local_irq_restore(flags); +} + + +/* + * This routine is called to set the UART divisor registers to match + * the specified baud rate for a serial port. + */ +static void mcfrs_change_speed(struct mcf_serial *info) +{ + volatile unsigned char *uartp; + unsigned int baudclk, cflag; + unsigned long flags; + unsigned char mr1, mr2; + int i; +#ifdef CONFIG_M5272 + unsigned int fraction; +#endif + + if (!info->tty || !info->tty->termios) + return; + cflag = info->tty->termios->c_cflag; + if (info->addr == 0) + return; + +#if 0 + printk("%s(%d): mcfrs_change_speed()\n", __FILE__, __LINE__); +#endif + + i = cflag & CBAUD; + if (i & CBAUDEX) { + i &= ~CBAUDEX; + if (i < 1 || i > 4) + info->tty->termios->c_cflag &= ~CBAUDEX; + else + i += 15; + } + if (i == 0) { + mcfrs_setsignals(info, 0, -1); + return; + } + + /* compute the baudrate clock */ +#ifdef CONFIG_M5272 + /* + * For the MCF5272, also compute the baudrate fraction. + */ + baudclk = (MCF_BUSCLK / mcfrs_baud_table[i]) / 32; + fraction = MCF_BUSCLK - (baudclk * 32 * mcfrs_baud_table[i]); + fraction *= 16; + fraction /= (32 * mcfrs_baud_table[i]); +#else + baudclk = ((MCF_BUSCLK / mcfrs_baud_table[i]) + 16) / 32; +#endif + + info->baud = mcfrs_baud_table[i]; + + mr1 = MCFUART_MR1_RXIRQRDY | MCFUART_MR1_RXERRCHAR; + mr2 = 0; + + switch (cflag & CSIZE) { + case CS5: mr1 |= MCFUART_MR1_CS5; break; + case CS6: mr1 |= MCFUART_MR1_CS6; break; + case CS7: mr1 |= MCFUART_MR1_CS7; break; + case CS8: + default: mr1 |= MCFUART_MR1_CS8; break; + } + + if (cflag & PARENB) { + if (cflag & CMSPAR) { + if (cflag & PARODD) + mr1 |= MCFUART_MR1_PARITYMARK; + else + mr1 |= MCFUART_MR1_PARITYSPACE; + } else { + if (cflag & PARODD) + mr1 |= MCFUART_MR1_PARITYODD; + else + mr1 |= MCFUART_MR1_PARITYEVEN; + } + } else { + mr1 |= MCFUART_MR1_PARITYNONE; + } + + if (cflag & CSTOPB) + mr2 |= MCFUART_MR2_STOP2; + else + mr2 |= MCFUART_MR2_STOP1; + + if (cflag & CRTSCTS) { + mr1 |= MCFUART_MR1_RXRTS; + mr2 |= MCFUART_MR2_TXCTS; + } + + if (cflag & CLOCAL) + info->flags &= ~ASYNC_CHECK_CD; + else + info->flags |= ASYNC_CHECK_CD; + + uartp = info->addr; + + local_irq_save(flags); +#if 0 + printk("%s(%d): mr1=%x mr2=%x baudclk=%x\n", __FILE__, __LINE__, + mr1, mr2, baudclk); +#endif + /* + Note: pg 12-16 of MCF5206e User's Manual states that a + software reset should be performed prior to changing + UMR1,2, UCSR, UACR, bit 7 + */ + uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */ + uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */ + uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETMRPTR; /* reset MR pointer */ + uartp[MCFUART_UMR] = mr1; + uartp[MCFUART_UMR] = mr2; + uartp[MCFUART_UBG1] = (baudclk & 0xff00) >> 8; /* set msb byte */ + uartp[MCFUART_UBG2] = (baudclk & 0xff); /* set lsb byte */ +#ifdef CONFIG_M5272 + uartp[MCFUART_UFPD] = (fraction & 0xf); /* set fraction */ +#endif + uartp[MCFUART_UCSR] = MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER; + uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE; + mcfrs_setsignals(info, 1, -1); + local_irq_restore(flags); + return; +} + +static void mcfrs_flush_chars(struct tty_struct *tty) +{ + volatile unsigned char *uartp; + struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "mcfrs_flush_chars")) + return; + + uartp = (volatile unsigned char *) info->addr; + + /* + * re-enable receiver interrupt + */ + local_irq_save(flags); + if ((!(info->imr & MCFUART_UIR_RXREADY)) && + (info->flags & ASYNC_INITIALIZED) ) { + info->imr |= MCFUART_UIR_RXREADY; + uartp[MCFUART_UIMR] = info->imr; + } + local_irq_restore(flags); + + if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || + !info->xmit_buf) + return; + + /* Enable transmitter */ + local_irq_save(flags); + info->imr |= MCFUART_UIR_TXREADY; + uartp[MCFUART_UIMR] = info->imr; + local_irq_restore(flags); +} + +static int mcfrs_write(struct tty_struct * tty, + const unsigned char *buf, int count) +{ + volatile unsigned char *uartp; + struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; + unsigned long flags; + int c, total = 0; + +#if 0 + printk("%s(%d): mcfrs_write(tty=%x,buf=%x,count=%d)\n", + __FILE__, __LINE__, (int)tty, (int)buf, count); +#endif + + if (serial_paranoia_check(info, tty->name, "mcfrs_write")) + return 0; + + if (!tty || !info->xmit_buf) + return 0; + + local_save_flags(flags); + while (1) { + local_irq_disable(); + c = min(count, (int) min(((int)SERIAL_XMIT_SIZE) - info->xmit_cnt - 1, + ((int)SERIAL_XMIT_SIZE) - info->xmit_head)); + local_irq_restore(flags); + + if (c <= 0) + break; + + memcpy(info->xmit_buf + info->xmit_head, buf, c); + + local_irq_disable(); + info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1); + info->xmit_cnt += c; + local_irq_restore(flags); + + buf += c; + count -= c; + total += c; + } + + local_irq_disable(); + uartp = info->addr; + info->imr |= MCFUART_UIR_TXREADY; + uartp[MCFUART_UIMR] = info->imr; + local_irq_restore(flags); + + return total; +} + +static int mcfrs_write_room(struct tty_struct *tty) +{ + struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; + int ret; + + if (serial_paranoia_check(info, tty->name, "mcfrs_write_room")) + return 0; + ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; + if (ret < 0) + ret = 0; + return ret; +} + +static int mcfrs_chars_in_buffer(struct tty_struct *tty) +{ + struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "mcfrs_chars_in_buffer")) + return 0; + return info->xmit_cnt; +} + +static void mcfrs_flush_buffer(struct tty_struct *tty) +{ + struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "mcfrs_flush_buffer")) + return; + + local_irq_save(flags); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + local_irq_restore(flags); + + tty_wakeup(tty); +} + +/* + * ------------------------------------------------------------ + * mcfrs_throttle() + * + * This routine is called by the upper-layer tty layer to signal that + * incoming characters should be throttled. + * ------------------------------------------------------------ + */ +static void mcfrs_throttle(struct tty_struct * tty) +{ + struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; +#ifdef SERIAL_DEBUG_THROTTLE + char buf[64]; + + printk("throttle %s: %d....\n", _tty_name(tty, buf), + tty->ldisc.chars_in_buffer(tty)); +#endif + + if (serial_paranoia_check(info, tty->name, "mcfrs_throttle")) + return; + + if (I_IXOFF(tty)) + info->x_char = STOP_CHAR(tty); + + /* Turn off RTS line (do this atomic) */ +} + +static void mcfrs_unthrottle(struct tty_struct * tty) +{ + struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; +#ifdef SERIAL_DEBUG_THROTTLE + char buf[64]; + + printk("unthrottle %s: %d....\n", _tty_name(tty, buf), + tty->ldisc.chars_in_buffer(tty)); +#endif + + if (serial_paranoia_check(info, tty->name, "mcfrs_unthrottle")) + return; + + if (I_IXOFF(tty)) { + if (info->x_char) + info->x_char = 0; + else + info->x_char = START_CHAR(tty); + } + + /* Assert RTS line (do this atomic) */ +} + +/* + * ------------------------------------------------------------ + * mcfrs_ioctl() and friends + * ------------------------------------------------------------ + */ + +static int get_serial_info(struct mcf_serial * info, + struct serial_struct * retinfo) +{ + struct serial_struct tmp; + + if (!retinfo) + return -EFAULT; + memset(&tmp, 0, sizeof(tmp)); + tmp.type = info->type; + tmp.line = info->line; + tmp.port = (unsigned int) info->addr; + tmp.irq = info->irq; + tmp.flags = info->flags; + tmp.baud_base = info->baud_base; + tmp.close_delay = info->close_delay; + tmp.closing_wait = info->closing_wait; + tmp.custom_divisor = info->custom_divisor; + return copy_to_user(retinfo,&tmp,sizeof(*retinfo)) ? -EFAULT : 0; +} + +static int set_serial_info(struct mcf_serial * info, + struct serial_struct * new_info) +{ + struct serial_struct new_serial; + struct mcf_serial old_info; + int retval = 0; + + if (!new_info) + return -EFAULT; + if (copy_from_user(&new_serial,new_info,sizeof(new_serial))) + return -EFAULT; + old_info = *info; + + if (!capable(CAP_SYS_ADMIN)) { + if ((new_serial.baud_base != info->baud_base) || + (new_serial.type != info->type) || + (new_serial.close_delay != info->close_delay) || + ((new_serial.flags & ~ASYNC_USR_MASK) != + (info->flags & ~ASYNC_USR_MASK))) + return -EPERM; + info->flags = ((info->flags & ~ASYNC_USR_MASK) | + (new_serial.flags & ASYNC_USR_MASK)); + info->custom_divisor = new_serial.custom_divisor; + goto check_and_exit; + } + + if (info->count > 1) + return -EBUSY; + + /* + * OK, past this point, all the error checking has been done. + * At this point, we start making changes..... + */ + + info->baud_base = new_serial.baud_base; + info->flags = ((info->flags & ~ASYNC_FLAGS) | + (new_serial.flags & ASYNC_FLAGS)); + info->type = new_serial.type; + info->close_delay = new_serial.close_delay; + info->closing_wait = new_serial.closing_wait; + +check_and_exit: + retval = startup(info); + return retval; +} + +/* + * get_lsr_info - get line status register info + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + */ +static int get_lsr_info(struct mcf_serial * info, unsigned int *value) +{ + volatile unsigned char *uartp; + unsigned long flags; + unsigned char status; + + local_irq_save(flags); + uartp = info->addr; + status = (uartp[MCFUART_USR] & MCFUART_USR_TXEMPTY) ? TIOCSER_TEMT : 0; + local_irq_restore(flags); + + return put_user(status,value); +} + +/* + * This routine sends a break character out the serial port. + */ +static void send_break( struct mcf_serial * info, int duration) +{ + volatile unsigned char *uartp; + unsigned long flags; + + if (!info->addr) + return; + set_current_state(TASK_INTERRUPTIBLE); + uartp = info->addr; + + local_irq_save(flags); + uartp[MCFUART_UCR] = MCFUART_UCR_CMDBREAKSTART; + schedule_timeout(duration); + uartp[MCFUART_UCR] = MCFUART_UCR_CMDBREAKSTOP; + local_irq_restore(flags); +} + +static int mcfrs_tiocmget(struct tty_struct *tty, struct file *file) +{ + struct mcf_serial * info = (struct mcf_serial *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "mcfrs_ioctl")) + return -ENODEV; + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + + return mcfrs_getsignals(info); +} + +static int mcfrs_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) +{ + struct mcf_serial * info = (struct mcf_serial *)tty->driver_data; + int rts = -1, dtr = -1; + + if (serial_paranoia_check(info, tty->name, "mcfrs_ioctl")) + return -ENODEV; + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + + if (set & TIOCM_RTS) + rts = 1; + if (set & TIOCM_DTR) + dtr = 1; + if (clear & TIOCM_RTS) + rts = 0; + if (clear & TIOCM_DTR) + dtr = 0; + + mcfrs_setsignals(info, dtr, rts); + + return 0; +} + +static int mcfrs_ioctl(struct tty_struct *tty, struct file * file, + unsigned int cmd, unsigned long arg) +{ + struct mcf_serial * info = (struct mcf_serial *)tty->driver_data; + int retval, error; + + if (serial_paranoia_check(info, tty->name, "mcfrs_ioctl")) + return -ENODEV; + + if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && + (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) && + (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) { + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + } + + switch (cmd) { + case TCSBRK: /* SVID version: non-zero arg --> no break */ + retval = tty_check_change(tty); + if (retval) + return retval; + tty_wait_until_sent(tty, 0); + if (!arg) + send_break(info, HZ/4); /* 1/4 second */ + return 0; + case TCSBRKP: /* support for POSIX tcsendbreak() */ + retval = tty_check_change(tty); + if (retval) + return retval; + tty_wait_until_sent(tty, 0); + send_break(info, arg ? arg*(HZ/10) : HZ/4); + return 0; + case TIOCGSOFTCAR: + error = put_user(C_CLOCAL(tty) ? 1 : 0, + (unsigned long *) arg); + if (error) + return error; + return 0; + case TIOCSSOFTCAR: + get_user(arg, (unsigned long *) arg); + tty->termios->c_cflag = + ((tty->termios->c_cflag & ~CLOCAL) | + (arg ? CLOCAL : 0)); + return 0; + case TIOCGSERIAL: + if (access_ok(VERIFY_WRITE, (void *) arg, + sizeof(struct serial_struct))) + return get_serial_info(info, + (struct serial_struct *) arg); + return -EFAULT; + case TIOCSSERIAL: + return set_serial_info(info, + (struct serial_struct *) arg); + case TIOCSERGETLSR: /* Get line status register */ + if (access_ok(VERIFY_WRITE, (void *) arg, + sizeof(unsigned int))) + return get_lsr_info(info, (unsigned int *) arg); + return -EFAULT; + case TIOCSERGSTRUCT: + error = copy_to_user((struct mcf_serial *) arg, + info, sizeof(struct mcf_serial)); + if (error) + return -EFAULT; + return 0; + +#ifdef TIOCSET422 + case TIOCSET422: { + unsigned int val; + get_user(val, (unsigned int *) arg); + mcf_setpa(MCFPP_PA11, (val ? 0 : MCFPP_PA11)); + break; + } + case TIOCGET422: { + unsigned int val; + val = (mcf_getpa() & MCFPP_PA11) ? 0 : 1; + put_user(val, (unsigned int *) arg); + break; + } +#endif + + default: + return -ENOIOCTLCMD; + } + return 0; +} + +static void mcfrs_set_termios(struct tty_struct *tty, struct termios *old_termios) +{ + struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; + + if (tty->termios->c_cflag == old_termios->c_cflag) + return; + + mcfrs_change_speed(info); + + if ((old_termios->c_cflag & CRTSCTS) && + !(tty->termios->c_cflag & CRTSCTS)) { + tty->hw_stopped = 0; + mcfrs_setsignals(info, -1, 1); +#if 0 + mcfrs_start(tty); +#endif + } +} + +/* + * ------------------------------------------------------------ + * mcfrs_close() + * + * This routine is called when the serial port gets closed. First, we + * wait for the last remaining data to be sent. Then, we unlink its + * S structure from the interrupt chain if necessary, and we free + * that IRQ if nothing is left in the chain. + * ------------------------------------------------------------ + */ +static void mcfrs_close(struct tty_struct *tty, struct file * filp) +{ + volatile unsigned char *uartp; + struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; + unsigned long flags; + + if (!info || serial_paranoia_check(info, tty->name, "mcfrs_close")) + return; + + local_irq_save(flags); + + if (tty_hung_up_p(filp)) { + local_irq_restore(flags); + return; + } + +#ifdef SERIAL_DEBUG_OPEN + printk("mcfrs_close ttyS%d, count = %d\n", info->line, info->count); +#endif + if ((tty->count == 1) && (info->count != 1)) { + /* + * Uh, oh. tty->count is 1, which means that the tty + * structure will be freed. Info->count should always + * be one in these conditions. If it's greater than + * one, we've got real problems, since it means the + * serial port won't be shutdown. + */ + printk("MCFRS: bad serial port count; tty->count is 1, " + "info->count is %d\n", info->count); + info->count = 1; + } + if (--info->count < 0) { + printk("MCFRS: bad serial port count for ttyS%d: %d\n", + info->line, info->count); + info->count = 0; + } + if (info->count) { + local_irq_restore(flags); + return; + } + info->flags |= ASYNC_CLOSING; + + /* + * Now we wait for the transmit buffer to clear; and we notify + * the line discipline to only process XON/XOFF characters. + */ + tty->closing = 1; + if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) + tty_wait_until_sent(tty, info->closing_wait); + + /* + * At this point we stop accepting input. To do this, we + * disable the receive line status interrupts, and tell the + * interrupt driver to stop checking the data ready bit in the + * line status register. + */ + info->imr &= ~MCFUART_UIR_RXREADY; + uartp = info->addr; + uartp[MCFUART_UIMR] = info->imr; + +#if 0 + /* FIXME: do we need to keep this enabled for console?? */ + if (mcfrs_console_inited && (mcfrs_console_port == info->line)) { + /* Do not disable the UART */ ; + } else +#endif + shutdown(info); + if (tty->driver->flush_buffer) + tty->driver->flush_buffer(tty); + tty_ldisc_flush(tty); + + tty->closing = 0; + info->event = 0; + info->tty = 0; +#if 0 + if (tty->ldisc.num != ldiscs[N_TTY].num) { + if (tty->ldisc.close) + (tty->ldisc.close)(tty); + tty->ldisc = ldiscs[N_TTY]; + tty->termios->c_line = N_TTY; + if (tty->ldisc.open) + (tty->ldisc.open)(tty); + } +#endif + if (info->blocked_open) { + if (info->close_delay) { + msleep_interruptible(jiffies_to_msecs(info->close_delay)); + } + wake_up_interruptible(&info->open_wait); + } + info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); + wake_up_interruptible(&info->close_wait); + local_irq_restore(flags); +} + +/* + * mcfrs_wait_until_sent() --- wait until the transmitter is empty + */ +static void +mcfrs_wait_until_sent(struct tty_struct *tty, int timeout) +{ +#ifdef CONFIG_M5272 +#define MCF5272_FIFO_SIZE 25 /* fifo size + shift reg */ + + struct mcf_serial * info = (struct mcf_serial *)tty->driver_data; + volatile unsigned char *uartp; + unsigned long orig_jiffies, fifo_time, char_time, fifo_cnt; + + if (serial_paranoia_check(info, tty->name, "mcfrs_wait_until_sent")) + return; + + orig_jiffies = jiffies; + + /* + * Set the check interval to be 1/5 of the approximate time + * to send the entire fifo, and make it at least 1. The check + * interval should also be less than the timeout. + * + * Note: we have to use pretty tight timings here to satisfy + * the NIST-PCTS. + */ + fifo_time = (MCF5272_FIFO_SIZE * HZ * 10) / info->baud; + char_time = fifo_time / 5; + if (char_time == 0) + char_time = 1; + if (timeout && timeout < char_time) + char_time = timeout; + + /* + * Clamp the timeout period at 2 * the time to empty the + * fifo. Just to be safe, set the minimum at .5 seconds. + */ + fifo_time *= 2; + if (fifo_time < (HZ/2)) + fifo_time = HZ/2; + if (!timeout || timeout > fifo_time) + timeout = fifo_time; + + /* + * Account for the number of bytes in the UART + * transmitter FIFO plus any byte being shifted out. + */ + uartp = (volatile unsigned char *) info->addr; + for (;;) { + fifo_cnt = (uartp[MCFUART_UTF] & MCFUART_UTF_TXB); + if ((uartp[MCFUART_USR] & (MCFUART_USR_TXREADY| + MCFUART_USR_TXEMPTY)) == + MCFUART_USR_TXREADY) + fifo_cnt++; + if (fifo_cnt == 0) + break; + msleep_interruptible(jiffies_to_msecs(char_time)); + if (signal_pending(current)) + break; + if (timeout && time_after(jiffies, orig_jiffies + timeout)) + break; + } +#else + /* + * For the other coldfire models, assume all data has been sent + */ +#endif +} + +/* + * mcfrs_hangup() --- called by tty_hangup() when a hangup is signaled. + */ +void mcfrs_hangup(struct tty_struct *tty) +{ + struct mcf_serial * info = (struct mcf_serial *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "mcfrs_hangup")) + return; + + mcfrs_flush_buffer(tty); + shutdown(info); + info->event = 0; + info->count = 0; + info->flags &= ~ASYNC_NORMAL_ACTIVE; + info->tty = 0; + wake_up_interruptible(&info->open_wait); +} + +/* + * ------------------------------------------------------------ + * mcfrs_open() and friends + * ------------------------------------------------------------ + */ +static int block_til_ready(struct tty_struct *tty, struct file * filp, + struct mcf_serial *info) +{ + DECLARE_WAITQUEUE(wait, current); + int retval; + int do_clocal = 0; + + /* + * If the device is in the middle of being closed, then block + * until it's done, and then try again. + */ + if (info->flags & ASYNC_CLOSING) { + interruptible_sleep_on(&info->close_wait); +#ifdef SERIAL_DO_RESTART + if (info->flags & ASYNC_HUP_NOTIFY) + return -EAGAIN; + else + return -ERESTARTSYS; +#else + return -EAGAIN; +#endif + } + + /* + * If non-blocking mode is set, or the port is not enabled, + * then make the check up front and then exit. + */ + if ((filp->f_flags & O_NONBLOCK) || + (tty->flags & (1 << TTY_IO_ERROR))) { + info->flags |= ASYNC_NORMAL_ACTIVE; + return 0; + } + + if (tty->termios->c_cflag & CLOCAL) + do_clocal = 1; + + /* + * Block waiting for the carrier detect and the line to become + * free (i.e., not in use by the callout). While we are in + * this loop, info->count is dropped by one, so that + * mcfrs_close() knows when to free things. We restore it upon + * exit, either normal or abnormal. + */ + retval = 0; + add_wait_queue(&info->open_wait, &wait); +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready before block: ttyS%d, count = %d\n", + info->line, info->count); +#endif + info->count--; + info->blocked_open++; + while (1) { + local_irq_disable(); + mcfrs_setsignals(info, 1, 1); + local_irq_enable(); + current->state = TASK_INTERRUPTIBLE; + if (tty_hung_up_p(filp) || + !(info->flags & ASYNC_INITIALIZED)) { +#ifdef SERIAL_DO_RESTART + if (info->flags & ASYNC_HUP_NOTIFY) + retval = -EAGAIN; + else + retval = -ERESTARTSYS; +#else + retval = -EAGAIN; +#endif + break; + } + if (!(info->flags & ASYNC_CLOSING) && + (do_clocal || (mcfrs_getsignals(info) & TIOCM_CD))) + break; + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready blocking: ttyS%d, count = %d\n", + info->line, info->count); +#endif + schedule(); + } + current->state = TASK_RUNNING; + remove_wait_queue(&info->open_wait, &wait); + if (!tty_hung_up_p(filp)) + info->count++; + info->blocked_open--; +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready after blocking: ttyS%d, count = %d\n", + info->line, info->count); +#endif + if (retval) + return retval; + info->flags |= ASYNC_NORMAL_ACTIVE; + return 0; +} + +/* + * This routine is called whenever a serial port is opened. It + * enables interrupts for a serial port, linking in its structure into + * the IRQ chain. It also performs the serial-specific + * initialization for the tty structure. + */ +int mcfrs_open(struct tty_struct *tty, struct file * filp) +{ + struct mcf_serial *info; + int retval, line; + + line = tty->index; + if ((line < 0) || (line >= NR_PORTS)) + return -ENODEV; + info = mcfrs_table + line; + if (serial_paranoia_check(info, tty->name, "mcfrs_open")) + return -ENODEV; +#ifdef SERIAL_DEBUG_OPEN + printk("mcfrs_open %s, count = %d\n", tty->name, info->count); +#endif + info->count++; + tty->driver_data = info; + info->tty = tty; + + /* + * Start up serial port + */ + retval = startup(info); + if (retval) + return retval; + + retval = block_til_ready(tty, filp, info); + if (retval) { +#ifdef SERIAL_DEBUG_OPEN + printk("mcfrs_open returning after block_til_ready with %d\n", + retval); +#endif + return retval; + } + +#ifdef SERIAL_DEBUG_OPEN + printk("mcfrs_open %s successful...\n", tty->name); +#endif + return 0; +} + +/* + * Based on the line number set up the internal interrupt stuff. + */ +static void mcfrs_irqinit(struct mcf_serial *info) +{ +#if defined(CONFIG_M5272) + volatile unsigned long *icrp; + volatile unsigned long *portp; + volatile unsigned char *uartp; + + uartp = info->addr; + icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR2); + + switch (info->line) { + case 0: + *icrp = 0xe0000000; + break; + case 1: + *icrp = 0x0e000000; + break; + default: + printk("MCFRS: don't know how to handle UART %d interrupt?\n", + info->line); + return; + } + + /* Enable the output lines for the serial ports */ + portp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PBCNT); + *portp = (*portp & ~0x000000ff) | 0x00000055; + portp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PDCNT); + *portp = (*portp & ~0x000003fc) | 0x000002a8; +#elif defined(CONFIG_M527x) || defined(CONFIG_M528x) + volatile unsigned char *icrp, *uartp; + volatile unsigned long *imrp; + + uartp = info->addr; + + icrp = (volatile unsigned char *) (MCF_MBAR + MCFICM_INTC0 + + MCFINTC_ICR0 + MCFINT_UART0 + info->line); + *icrp = 0x33; /* UART0 with level 6, priority 3 */ + + imrp = (volatile unsigned long *) (MCF_MBAR + MCFICM_INTC0 + + MCFINTC_IMRL); + *imrp &= ~((1 << (info->irq - MCFINT_VECBASE)) | 1); +#else + volatile unsigned char *icrp, *uartp; + + switch (info->line) { + case 0: + icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_UART1ICR); + *icrp = /*MCFSIM_ICR_AUTOVEC |*/ MCFSIM_ICR_LEVEL6 | + MCFSIM_ICR_PRI1; + mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1); + break; + case 1: + icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_UART2ICR); + *icrp = /*MCFSIM_ICR_AUTOVEC |*/ MCFSIM_ICR_LEVEL6 | + MCFSIM_ICR_PRI2; + mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2); + break; + default: + printk("MCFRS: don't know how to handle UART %d interrupt?\n", + info->line); + return; + } + + uartp = info->addr; + uartp[MCFUART_UIVR] = info->irq; +#endif + + /* Clear mask, so no surprise interrupts. */ + uartp[MCFUART_UIMR] = 0; + + if (request_irq(info->irq, mcfrs_interrupt, SA_INTERRUPT, + "ColdFire UART", NULL)) { + printk("MCFRS: Unable to attach ColdFire UART %d interrupt " + "vector=%d\n", info->line, info->irq); + } + + return; +} + + +char *mcfrs_drivername = "ColdFire internal UART serial driver version 1.00\n"; + + +/* + * Serial stats reporting... + */ +int mcfrs_readproc(char *page, char **start, off_t off, int count, + int *eof, void *data) +{ + struct mcf_serial *info; + char str[20]; + int len, sigs, i; + + len = sprintf(page, mcfrs_drivername); + for (i = 0; (i < NR_PORTS); i++) { + info = &mcfrs_table[i]; + len += sprintf((page + len), "%d: port:%x irq=%d baud:%d ", + i, (unsigned int) info->addr, info->irq, info->baud); + if (info->stats.rx || info->stats.tx) + len += sprintf((page + len), "tx:%d rx:%d ", + info->stats.tx, info->stats.rx); + if (info->stats.rxframing) + len += sprintf((page + len), "fe:%d ", + info->stats.rxframing); + if (info->stats.rxparity) + len += sprintf((page + len), "pe:%d ", + info->stats.rxparity); + if (info->stats.rxbreak) + len += sprintf((page + len), "brk:%d ", + info->stats.rxbreak); + if (info->stats.rxoverrun) + len += sprintf((page + len), "oe:%d ", + info->stats.rxoverrun); + + str[0] = str[1] = 0; + if ((sigs = mcfrs_getsignals(info))) { + if (sigs & TIOCM_RTS) + strcat(str, "|RTS"); + if (sigs & TIOCM_CTS) + strcat(str, "|CTS"); + if (sigs & TIOCM_DTR) + strcat(str, "|DTR"); + if (sigs & TIOCM_CD) + strcat(str, "|CD"); + } + + len += sprintf((page + len), "%s\n", &str[1]); + } + + return(len); +} + + +/* Finally, routines used to initialize the serial driver. */ + +static void show_serial_version(void) +{ + printk(mcfrs_drivername); +} + +static struct tty_operations mcfrs_ops = { + .open = mcfrs_open, + .close = mcfrs_close, + .write = mcfrs_write, + .flush_chars = mcfrs_flush_chars, + .write_room = mcfrs_write_room, + .chars_in_buffer = mcfrs_chars_in_buffer, + .flush_buffer = mcfrs_flush_buffer, + .ioctl = mcfrs_ioctl, + .throttle = mcfrs_throttle, + .unthrottle = mcfrs_unthrottle, + .set_termios = mcfrs_set_termios, + .stop = mcfrs_stop, + .start = mcfrs_start, + .hangup = mcfrs_hangup, + .read_proc = mcfrs_readproc, + .wait_until_sent = mcfrs_wait_until_sent, + .tiocmget = mcfrs_tiocmget, + .tiocmset = mcfrs_tiocmset, +}; + +/* mcfrs_init inits the driver */ +static int __init +mcfrs_init(void) +{ + struct mcf_serial *info; + unsigned long flags; + int i; + + /* Setup base handler, and timer table. */ +#ifdef MCFPP_DCD0 + init_timer(&mcfrs_timer_struct); + mcfrs_timer_struct.function = mcfrs_timer; + mcfrs_timer_struct.data = 0; + mcfrs_timer_struct.expires = jiffies + HZ/25; + add_timer(&mcfrs_timer_struct); + mcfrs_ppstatus = mcf_getppdata() & (MCFPP_DCD0 | MCFPP_DCD1); +#endif + mcfrs_serial_driver = alloc_tty_driver(NR_PORTS); + if (!mcfrs_serial_driver) + return -ENOMEM; + + show_serial_version(); + + /* Initialize the tty_driver structure */ + mcfrs_serial_driver->owner = THIS_MODULE; + mcfrs_serial_driver->name = "ttyS"; + mcfrs_serial_driver->devfs_name = "ttys/"; + mcfrs_serial_driver->driver_name = "serial"; + mcfrs_serial_driver->major = TTY_MAJOR; + mcfrs_serial_driver->minor_start = 64; + mcfrs_serial_driver->type = TTY_DRIVER_TYPE_SERIAL; + mcfrs_serial_driver->subtype = SERIAL_TYPE_NORMAL; + mcfrs_serial_driver->init_termios = tty_std_termios; + + mcfrs_serial_driver->init_termios.c_cflag = + mcfrs_console_cbaud | CS8 | CREAD | HUPCL | CLOCAL; + mcfrs_serial_driver->flags = TTY_DRIVER_REAL_RAW; + + tty_set_operations(mcfrs_serial_driver, &mcfrs_ops); + + if (tty_register_driver(mcfrs_serial_driver)) { + printk("MCFRS: Couldn't register serial driver\n"); + put_tty_driver(mcfrs_serial_driver); + return(-EBUSY); + } + + local_irq_save(flags); + + /* + * Configure all the attached serial ports. + */ + for (i = 0, info = mcfrs_table; (i < NR_PORTS); i++, info++) { + info->magic = SERIAL_MAGIC; + info->line = i; + info->tty = 0; + info->custom_divisor = 16; + info->close_delay = 50; + info->closing_wait = 3000; + info->x_char = 0; + info->event = 0; + info->count = 0; + info->blocked_open = 0; + INIT_WORK(&info->tqueue, mcfrs_offintr, info); + INIT_WORK(&info->tqueue_hangup, do_serial_hangup, info); + init_waitqueue_head(&info->open_wait); + init_waitqueue_head(&info->close_wait); + + info->imr = 0; + mcfrs_setsignals(info, 0, 0); + mcfrs_irqinit(info); + + printk("ttyS%d at 0x%04x (irq = %d)", info->line, + (unsigned int) info->addr, info->irq); + printk(" is a builtin ColdFire UART\n"); + } + + local_irq_restore(flags); + return 0; +} + +module_init(mcfrs_init); + +/****************************************************************************/ +/* Serial Console */ +/****************************************************************************/ + +/* + * Quick and dirty UART initialization, for console output. + */ + +void mcfrs_init_console(void) +{ + volatile unsigned char *uartp; + unsigned int clk; + + /* + * Reset UART, get it into known state... + */ + uartp = (volatile unsigned char *) (MCF_MBAR + + (mcfrs_console_port ? MCFUART_BASE2 : MCFUART_BASE1)); + + uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */ + uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */ + uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETMRPTR; /* reset MR pointer */ + + /* + * Set port for defined baud , 8 data bits, 1 stop bit, no parity. + */ + uartp[MCFUART_UMR] = MCFUART_MR1_PARITYNONE | MCFUART_MR1_CS8; + uartp[MCFUART_UMR] = MCFUART_MR2_STOP1; + + clk = ((MCF_BUSCLK / mcfrs_console_baud) + 16) / 32; /* set baud */ + uartp[MCFUART_UBG1] = (clk & 0xff00) >> 8; /* set msb baud */ + uartp[MCFUART_UBG2] = (clk & 0xff); /* set lsb baud */ + + uartp[MCFUART_UCSR] = MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER; + uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE; + + mcfrs_console_inited++; + return; +} + + +/* + * Setup for console. Argument comes from the boot command line. + */ + +int mcfrs_console_setup(struct console *cp, char *arg) +{ + int i, n = CONSOLE_BAUD_RATE; + + if (!cp) + return(-1); + + if (!strncmp(cp->name, "ttyS", 4)) + mcfrs_console_port = cp->index; + else if (!strncmp(cp->name, "cua", 3)) + mcfrs_console_port = cp->index; + else + return(-1); + + if (arg) + n = simple_strtoul(arg,NULL,0); + for (i = 0; i < MCFRS_BAUD_TABLE_SIZE; i++) + if (mcfrs_baud_table[i] == n) + break; + if (i < MCFRS_BAUD_TABLE_SIZE) { + mcfrs_console_baud = n; + mcfrs_console_cbaud = 0; + if (i > 15) { + mcfrs_console_cbaud |= CBAUDEX; + i -= 15; + } + mcfrs_console_cbaud |= i; + } + mcfrs_init_console(); /* make sure baud rate changes */ + return(0); +} + + +static struct tty_driver *mcfrs_console_device(struct console *c, int *index) +{ + *index = c->index; + return mcfrs_serial_driver; +} + + +/* + * Output a single character, using UART polled mode. + * This is used for console output. + */ + +void mcfrs_put_char(char ch) +{ + volatile unsigned char *uartp; + unsigned long flags; + int i; + + uartp = (volatile unsigned char *) (MCF_MBAR + + (mcfrs_console_port ? MCFUART_BASE2 : MCFUART_BASE1)); + + local_irq_save(flags); + for (i = 0; (i < 0x10000); i++) { + if (uartp[MCFUART_USR] & MCFUART_USR_TXREADY) + break; + } + if (i < 0x10000) { + uartp[MCFUART_UTB] = ch; + for (i = 0; (i < 0x10000); i++) + if (uartp[MCFUART_USR] & MCFUART_USR_TXEMPTY) + break; + } + if (i >= 0x10000) + mcfrs_init_console(); /* try and get it back */ + local_irq_restore(flags); + + return; +} + + +/* + * rs_console_write is registered for printk output. + */ + +void mcfrs_console_write(struct console *cp, const char *p, unsigned len) +{ + if (!mcfrs_console_inited) + mcfrs_init_console(); + while (len-- > 0) { + if (*p == '\n') + mcfrs_put_char('\r'); + mcfrs_put_char(*p++); + } +} + +/* + * declare our consoles + */ + +struct console mcfrs_console = { + .name = "ttyS", + .write = mcfrs_console_write, + .device = mcfrs_console_device, + .setup = mcfrs_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + +static int __init mcfrs_console_init(void) +{ + register_console(&mcfrs_console); + return 0; +} + +console_initcall(mcfrs_console_init); + +/****************************************************************************/ -- cgit v1.2.3