From c63847a3621d2bac054f5709783860ecabd0ee7e Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Fri, 6 Jun 2008 17:04:08 +0900 Subject: sh: Add SCIF2 support for SH7763. SH7763 has 3 SCIF device. Current code supports SCIF0 and 1. SCIF0 and 1 are same register constitution, but only SCIF2 is different. I added support of SCIF2. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.c | 17 ++++++++++++++++- drivers/serial/sh-sci.h | 38 +++++++++++++++++++++++++++----------- 2 files changed, 43 insertions(+), 12 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 208e42ba945..3df2aaec829 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -410,7 +410,6 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) #endif #if defined(CONFIG_CPU_SUBTYPE_SH7760) || \ - defined(CONFIG_CPU_SUBTYPE_SH7763) || \ defined(CONFIG_CPU_SUBTYPE_SH7780) || \ defined(CONFIG_CPU_SUBTYPE_SH7785) static inline int scif_txroom(struct uart_port *port) @@ -422,6 +421,22 @@ static inline int scif_rxroom(struct uart_port *port) { return sci_in(port, SCRFDR) & 0xff; } +#elif defined(CONFIG_CPU_SUBTYPE_SH7763) +static inline int scif_txroom(struct uart_port *port) +{ + if((port->mapbase == 0xffe00000) || (port->mapbase == 0xffe08000)) /* SCIF0/1*/ + return SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0xff); + else /* SCIF2 */ + return SCIF2_TXROOM_MAX - (sci_in(port, SCFDR) >> 8); +} + +static inline int scif_rxroom(struct uart_port *port) +{ + if((port->mapbase == 0xffe00000) || (port->mapbase == 0xffe08000)) /* SCIF0/1*/ + return sci_in(port, SCRFDR) & 0xff; + else /* SCIF2 */ + return sci_in(port, SCFDR) & SCIF2_RFDC_MASK; +} #else static inline int scif_txroom(struct uart_port *port) { diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index eb84833233f..cd728df6a01 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -123,8 +123,9 @@ #elif defined(CONFIG_CPU_SUBTYPE_SH7763) # define SCSPTR0 0xffe00024 /* 16 bit SCIF */ # define SCSPTR1 0xffe08024 /* 16 bit SCIF */ +# define SCSPTR2 0xffe10020 /* 16 bit SCIF/IRDA */ # define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ # define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7770) # define SCSPTR0 0xff923020 /* 16 bit SCIF */ @@ -188,6 +189,7 @@ defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ defined(CONFIG_CPU_SUBTYPE_SH7751) || \ defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ + defined(CONFIG_CPU_SUBTYPE_SH7763) || \ defined(CONFIG_CPU_SUBTYPE_SH7780) || \ defined(CONFIG_CPU_SUBTYPE_SH7785) || \ defined(CONFIG_CPU_SUBTYPE_SHX3) @@ -225,14 +227,21 @@ #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) -#define SCIF_ORER 0x0200 -#define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER) -#define SCIF_RFDC_MASK 0x007f -#define SCIF_TXROOM_MAX 64 +# define SCIF_ORER 0x0200 +# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER) +# define SCIF_RFDC_MASK 0x007f +# define SCIF_TXROOM_MAX 64 +#elif defined(CONFIG_CPU_SUBTYPE_SH7763) +# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK ) +# define SCIF_RFDC_MASK 0x007f +# define SCIF_TXROOM_MAX 64 +/* SH7763 SCIF2 support */ +# define SCIF2_RFDC_MASK 0x001f +# define SCIF2_TXROOM_MAX 16 #else -#define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK) -#define SCIF_RFDC_MASK 0x001f -#define SCIF_TXROOM_MAX 16 +# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK) +# define SCIF_RFDC_MASK 0x001f +# define SCIF_TXROOM_MAX 16 #endif #if defined(SCI_ONLY) @@ -445,11 +454,16 @@ SCIF_FNS(SCFCR, 0x0c, 8, 0x18, 16) defined(CONFIG_CPU_SUBTYPE_SH7763) || \ defined(CONFIG_CPU_SUBTYPE_SH7780) || \ defined(CONFIG_CPU_SUBTYPE_SH7785) -SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16) SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16) SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16) SCIF_FNS(SCSPTR, 0, 0, 0x24, 16) SCIF_FNS(SCLSR, 0, 0, 0x28, 16) +#if defined(CONFIG_CPU_SUBTYPE_SH7763) +/* SH7763 SCIF2 */ +SCIF_FNS(SCFDR, 0, 0, 0x1C, 16) +SCIF_FNS(SCSPTR2, 0, 0, 0x20, 16) +SCIF_FNS(SCLSR2, 0, 0, 0x24, 16) +#endif /* CONFIG_CPU_SUBTYPE_SH7763 */ #else SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16) #if defined(CONFIG_CPU_SUBTYPE_SH7722) @@ -652,6 +666,9 @@ static inline int sci_rxd_in(struct uart_port *port) return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffe08000) return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + if (port->mapbase == 0xffe10000) + return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF/IRDA */ + return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7770) @@ -764,8 +781,7 @@ static inline int sci_rxd_in(struct uart_port *port) * -- Mitch Davis - 15 Jul 2000 */ -#if defined(CONFIG_CPU_SUBTYPE_SH7763) || \ - defined(CONFIG_CPU_SUBTYPE_SH7780) || \ +#if defined(CONFIG_CPU_SUBTYPE_SH7780) || \ defined(CONFIG_CPU_SUBTYPE_SH7785) #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1) #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \ -- cgit v1.2.3 From 7485d26b7e13ee8ff82adb271ac90a996c1fe830 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 24 Jul 2008 18:36:37 +0200 Subject: cpm_uart: Modem control lines support This patch replaces the get_mctrl/set_mctrl stubs with modem control line read/write access through the GPIO lib. Available modem control lines are described in the device tree using GPIO bindings. The driver expect a GPIO pin for each of the CTS, RTS, DCD, DSR, DTR and RI signals. Unused control lines can be left out. Signed-off-by: Laurent Pinchart Signed-off-by: Kumar Gala --- drivers/serial/cpm_uart/cpm_uart.h | 10 +++++++++ drivers/serial/cpm_uart/cpm_uart_core.c | 40 ++++++++++++++++++++++++++++++--- 2 files changed, 47 insertions(+), 3 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h index 5c76e0ae058..5999ef5ac78 100644 --- a/drivers/serial/cpm_uart/cpm_uart.h +++ b/drivers/serial/cpm_uart/cpm_uart.h @@ -50,6 +50,15 @@ #define SCC_WAIT_CLOSING 100 +#define GPIO_CTS 0 +#define GPIO_RTS 1 +#define GPIO_DCD 2 +#define GPIO_DSR 3 +#define GPIO_DTR 4 +#define GPIO_RI 5 + +#define NUM_GPIOS (GPIO_RI+1) + struct uart_cpm_port { struct uart_port port; u16 rx_nrfifos; @@ -82,6 +91,7 @@ struct uart_cpm_port { int wait_closing; /* value to combine with opcode to form cpm command */ u32 command; + int gpios[NUM_GPIOS]; }; extern int cpm_uart_nr; diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index a4f86927a74..5e0c17f7165 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -43,6 +43,8 @@ #include #include #include +#include +#include #include #include @@ -96,13 +98,41 @@ static unsigned int cpm_uart_tx_empty(struct uart_port *port) static void cpm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) { - /* Whee. Do nothing. */ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + + if (pinfo->gpios[GPIO_RTS] >= 0) + gpio_set_value(pinfo->gpios[GPIO_RTS], !(mctrl & TIOCM_RTS)); + + if (pinfo->gpios[GPIO_DTR] >= 0) + gpio_set_value(pinfo->gpios[GPIO_DTR], !(mctrl & TIOCM_DTR)); } static unsigned int cpm_uart_get_mctrl(struct uart_port *port) { - /* Whee. Do nothing. */ - return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + unsigned int mctrl = TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; + + if (pinfo->gpios[GPIO_CTS] >= 0) { + if (gpio_get_value(pinfo->gpios[GPIO_CTS])) + mctrl &= ~TIOCM_CTS; + } + + if (pinfo->gpios[GPIO_DSR] >= 0) { + if (gpio_get_value(pinfo->gpios[GPIO_DSR])) + mctrl &= ~TIOCM_DSR; + } + + if (pinfo->gpios[GPIO_DCD] >= 0) { + if (gpio_get_value(pinfo->gpios[GPIO_DCD])) + mctrl &= ~TIOCM_CAR; + } + + if (pinfo->gpios[GPIO_RI] >= 0) { + if (!gpio_get_value(pinfo->gpios[GPIO_RI])) + mctrl |= TIOCM_RNG; + } + + return mctrl; } /* @@ -991,6 +1021,7 @@ static int cpm_uart_init_port(struct device_node *np, void __iomem *mem, *pram; int len; int ret; + int i; data = of_get_property(np, "fsl,cpm-brg", &len); if (!data || len != 4) { @@ -1050,6 +1081,9 @@ static int cpm_uart_init_port(struct device_node *np, goto out_pram; } + for (i = 0; i < NUM_GPIOS; i++) + pinfo->gpios[i] = of_get_gpio(np, i); + return cpm_uart_request_port(&pinfo->port); out_pram: -- cgit v1.2.3 From 80776554b6c93cf828ddc702010c6a189aa0d0e9 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Mon, 28 Jul 2008 10:42:16 +0200 Subject: cpm_uart: Add generic clock API support to set baudrates This patch introduces baudrate setting support via the generic clock API. When present the optional device tree clock property is used instead of fsl-cpm-brg. Platforms can then define complex clock schemes, to output the serial clock on an external pin for instance. Signed-off-by: Laurent Pinchart Signed-off-by: Kumar Gala --- drivers/serial/cpm_uart/cpm_uart.h | 1 + drivers/serial/cpm_uart/cpm_uart_core.c | 26 +++++++++++++++++++------- 2 files changed, 20 insertions(+), 7 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h index 5999ef5ac78..7274b527a3c 100644 --- a/drivers/serial/cpm_uart/cpm_uart.h +++ b/drivers/serial/cpm_uart/cpm_uart.h @@ -77,6 +77,7 @@ struct uart_cpm_port { unsigned char *rx_buf; u32 flags; void (*set_lineif)(struct uart_cpm_port *); + struct clk *clk; u8 brg; uint dp_addr; void *mem_addr; diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index 5e0c17f7165..25efca5a7a1 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -45,6 +45,7 @@ #include #include #include +#include #include #include @@ -596,7 +597,10 @@ static void cpm_uart_set_termios(struct uart_port *port, out_be16(&sccp->scc_psmr, (sbits << 12) | scval); } - cpm_set_brg(pinfo->brg - 1, baud); + if (pinfo->clk) + clk_set_rate(pinfo->clk, baud); + else + cpm_set_brg(pinfo->brg - 1, baud); spin_unlock_irqrestore(&port->lock, flags); } @@ -1023,13 +1027,21 @@ static int cpm_uart_init_port(struct device_node *np, int ret; int i; - data = of_get_property(np, "fsl,cpm-brg", &len); - if (!data || len != 4) { - printk(KERN_ERR "CPM UART %s has no/invalid " - "fsl,cpm-brg property.\n", np->name); - return -EINVAL; + data = of_get_property(np, "clock", NULL); + if (data) { + struct clk *clk = clk_get(NULL, (const char*)data); + if (!IS_ERR(clk)) + pinfo->clk = clk; + } + if (!pinfo->clk) { + data = of_get_property(np, "fsl,cpm-brg", &len); + if (!data || len != 4) { + printk(KERN_ERR "CPM UART %s has no/invalid " + "fsl,cpm-brg property.\n", np->name); + return -EINVAL; + } + pinfo->brg = *data; } - pinfo->brg = *data; data = of_get_property(np, "fsl,cpm-command", &len); if (!data || len != 4) { -- cgit v1.2.3 From c2697968c012cfdba2d92fa6e27e3e34f918af2f Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 30 Jul 2008 00:56:39 +0900 Subject: serial: sh-sci: Fix up SH7760/SH7780/SH7785 early printk regression. As noted by Manuel: Commit c63847a3621d2bac054f5709783860ecabd0ee7e ("sh: Add SCIF2 support for SH7763.") broke build with CONFIG_EARLY_PRINTK enabled for me (SH7760): CC arch/sh/kernel/early_printk.o /mnt/work/sh7760/kernel/linux-2.6.git/arch/sh/kernel/early_printk.c: In function 'scif_sercon_putc': /mnt/work/sh7760/kernel/linux-2.6.git/arch/sh/kernel/early_printk.c:84: error: implicit declaration of function 'sci_SCFDR_in' Move the SH7763 definitions out on their own, so they don't create additional confusion within the SH7760/SH7780/SH7785 block. Restore the deleted SCFDR definition for these parts. Reported-by: Manuel Lauss Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.h | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index cd728df6a01..8a0749e34ca 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -451,19 +451,21 @@ SCIx_FNS(SCxSR, 0x08, 8, 0x10, 8, 0x08, 16, 0x10, 16, 0x04, 8) SCIx_FNS(SCxRDR, 0x0a, 8, 0x14, 8, 0x0A, 8, 0x14, 8, 0x05, 8) SCIF_FNS(SCFCR, 0x0c, 8, 0x18, 16) #if defined(CONFIG_CPU_SUBTYPE_SH7760) || \ - defined(CONFIG_CPU_SUBTYPE_SH7763) || \ defined(CONFIG_CPU_SUBTYPE_SH7780) || \ defined(CONFIG_CPU_SUBTYPE_SH7785) +SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16) SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16) SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16) SCIF_FNS(SCSPTR, 0, 0, 0x24, 16) SCIF_FNS(SCLSR, 0, 0, 0x28, 16) -#if defined(CONFIG_CPU_SUBTYPE_SH7763) -/* SH7763 SCIF2 */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7763) SCIF_FNS(SCFDR, 0, 0, 0x1C, 16) SCIF_FNS(SCSPTR2, 0, 0, 0x20, 16) -SCIF_FNS(SCLSR2, 0, 0, 0x24, 16) -#endif /* CONFIG_CPU_SUBTYPE_SH7763 */ +SCIF_FNS(SCLSR2, 0, 0, 0x24, 16) +SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16) +SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16) +SCIF_FNS(SCSPTR, 0, 0, 0x24, 16) +SCIF_FNS(SCLSR, 0, 0, 0x28, 16) #else SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16) #if defined(CONFIG_CPU_SUBTYPE_SH7722) -- cgit v1.2.3 From c389d27b5e643d745f55ffb939b1426060ba63d4 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Tue, 29 Jul 2008 22:33:32 -0700 Subject: 8250.c: port.lock is irq-safe serial8250_startup() doesn't disable interrupts while taking the &up->port.lock which might race against the interrupt handler serial8250_interrupt(), which when entered, will deadlock waiting for the lock to be released. Signed-off-by: Borislav Petkov Tested-by: Ingo Molnar Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/8250.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index a97f1ae11f7..342e12fb1c2 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -1885,7 +1885,7 @@ static int serial8250_startup(struct uart_port *port) * the interrupt is enabled. Delays are necessary to * allow register changes to become visible. */ - spin_lock(&up->port.lock); + spin_lock_irqsave(&up->port.lock, flags); if (up->port.flags & UPF_SHARE_IRQ) disable_irq_nosync(up->port.irq); @@ -1901,7 +1901,7 @@ static int serial8250_startup(struct uart_port *port) if (up->port.flags & UPF_SHARE_IRQ) enable_irq(up->port.irq); - spin_unlock(&up->port.lock); + spin_unlock_irqrestore(&up->port.lock, flags); /* * If the interrupt is not reasserted, setup a timer to -- cgit v1.2.3 From 07a887d399b84668bc26cd040d699b26ec3086c2 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 29 Jul 2008 22:33:44 -0700 Subject: remove drivers/serial/v850e_uart.c The removal of drivers/serial/v850e_uart.c originally was in my v850 removal patch, but it seems it got lost somewhere. Reported-by: Robert P. J. Day Signed-off-by: Adrian Bunk Acked-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/Makefile | 1 - drivers/serial/v850e_uart.c | 548 -------------------------------------------- 2 files changed, 549 deletions(-) delete mode 100644 drivers/serial/v850e_uart.c (limited to 'drivers/serial') diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 3a0bbbe17aa..7e7383e890d 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -42,7 +42,6 @@ obj-$(CONFIG_SERIAL_68328) += 68328serial.o obj-$(CONFIG_SERIAL_68360) += 68360serial.o obj-$(CONFIG_SERIAL_COLDFIRE) += mcfserial.o obj-$(CONFIG_SERIAL_MCF) += mcf.o -obj-$(CONFIG_V850E_UART) += v850e_uart.o obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o obj-$(CONFIG_SERIAL_DZ) += dz.o diff --git a/drivers/serial/v850e_uart.c b/drivers/serial/v850e_uart.c deleted file mode 100644 index 5acf061b6cd..00000000000 --- a/drivers/serial/v850e_uart.c +++ /dev/null @@ -1,548 +0,0 @@ -/* - * drivers/serial/v850e_uart.c -- Serial I/O using V850E on-chip UART or UARTB - * - * Copyright (C) 2001,02,03 NEC Electronics Corporation - * Copyright (C) 2001,02,03 Miles Bader - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader - */ - -/* This driver supports both the original V850E UART interface (called - merely `UART' in the docs) and the newer `UARTB' interface, which is - roughly a superset of the first one. The selection is made at - configure time -- if CONFIG_V850E_UARTB is defined, then UARTB is - presumed, otherwise the old UART -- as these are on-CPU UARTS, a system - can never have both. - - The UARTB interface also has a 16-entry FIFO mode, which is not - yet supported by this driver. */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -/* Initial UART state. This may be overridden by machine-dependent headers. */ -#ifndef V850E_UART_INIT_BAUD -#define V850E_UART_INIT_BAUD 115200 -#endif -#ifndef V850E_UART_INIT_CFLAGS -#define V850E_UART_INIT_CFLAGS (B115200 | CS8 | CREAD) -#endif - -/* A string used for prefixing printed descriptions; since the same UART - macro is actually used on other chips than the V850E. This must be a - constant string. */ -#ifndef V850E_UART_CHIP_NAME -#define V850E_UART_CHIP_NAME "V850E" -#endif - -#define V850E_UART_MINOR_BASE 64 /* First tty minor number */ - - -/* Low-level UART functions. */ - -/* Configure and turn on uart channel CHAN, using the termios `control - modes' bits in CFLAGS, and a baud-rate of BAUD. */ -void v850e_uart_configure (unsigned chan, unsigned cflags, unsigned baud) -{ - int flags; - v850e_uart_speed_t old_speed; - v850e_uart_config_t old_config; - v850e_uart_speed_t new_speed = v850e_uart_calc_speed (baud); - v850e_uart_config_t new_config = v850e_uart_calc_config (cflags); - - /* Disable interrupts while we're twiddling the hardware. */ - local_irq_save (flags); - -#ifdef V850E_UART_PRE_CONFIGURE - V850E_UART_PRE_CONFIGURE (chan, cflags, baud); -#endif - - old_config = V850E_UART_CONFIG (chan); - old_speed = v850e_uart_speed (chan); - - if (! v850e_uart_speed_eq (old_speed, new_speed)) { - /* The baud rate has changed. First, disable the UART. */ - V850E_UART_CONFIG (chan) = V850E_UART_CONFIG_FINI; - old_config = 0; /* Force the uart to be re-initialized. */ - - /* Reprogram the baud-rate generator. */ - v850e_uart_set_speed (chan, new_speed); - } - - if (! (old_config & V850E_UART_CONFIG_ENABLED)) { - /* If we are using the uart for the first time, start by - enabling it, which must be done before turning on any - other bits. */ - V850E_UART_CONFIG (chan) = V850E_UART_CONFIG_INIT; - /* See the initial state. */ - old_config = V850E_UART_CONFIG (chan); - } - - if (new_config != old_config) { - /* Which of the TXE/RXE bits we'll temporarily turn off - before changing other control bits. */ - unsigned temp_disable = 0; - /* Which of the TXE/RXE bits will be enabled. */ - unsigned enable = 0; - unsigned changed_bits = new_config ^ old_config; - - /* Which of RX/TX will be enabled in the new configuration. */ - if (new_config & V850E_UART_CONFIG_RX_BITS) - enable |= (new_config & V850E_UART_CONFIG_RX_ENABLE); - if (new_config & V850E_UART_CONFIG_TX_BITS) - enable |= (new_config & V850E_UART_CONFIG_TX_ENABLE); - - /* Figure out which of RX/TX needs to be disabled; note - that this will only happen if they're not already - disabled. */ - if (changed_bits & V850E_UART_CONFIG_RX_BITS) - temp_disable - |= (old_config & V850E_UART_CONFIG_RX_ENABLE); - if (changed_bits & V850E_UART_CONFIG_TX_BITS) - temp_disable - |= (old_config & V850E_UART_CONFIG_TX_ENABLE); - - /* We have to turn off RX and/or TX mode before changing - any associated control bits. */ - if (temp_disable) - V850E_UART_CONFIG (chan) = old_config & ~temp_disable; - - /* Write the new control bits, while RX/TX are disabled. */ - if (changed_bits & ~enable) - V850E_UART_CONFIG (chan) = new_config & ~enable; - - v850e_uart_config_delay (new_config, new_speed); - - /* Write the final version, with enable bits turned on. */ - V850E_UART_CONFIG (chan) = new_config; - } - - local_irq_restore (flags); -} - - -/* Low-level console. */ - -#ifdef CONFIG_V850E_UART_CONSOLE - -static void v850e_uart_cons_write (struct console *co, - const char *s, unsigned count) -{ - if (count > 0) { - unsigned chan = co->index; - unsigned irq = V850E_UART_TX_IRQ (chan); - int irq_was_enabled, irq_was_pending, flags; - - /* We don't want to get `transmission completed' - interrupts, since we're busy-waiting, so we disable them - while sending (we don't disable interrupts entirely - because sending over a serial line is really slow). We - save the status of the tx interrupt and restore it when - we're done so that using printk doesn't interfere with - normal serial transmission (other than interleaving the - output, of course!). This should work correctly even if - this function is interrupted and the interrupt printks - something. */ - - /* Disable interrupts while fiddling with tx interrupt. */ - local_irq_save (flags); - /* Get current tx interrupt status. */ - irq_was_enabled = v850e_intc_irq_enabled (irq); - irq_was_pending = v850e_intc_irq_pending (irq); - /* Disable tx interrupt if necessary. */ - if (irq_was_enabled) - v850e_intc_disable_irq (irq); - /* Turn interrupts back on. */ - local_irq_restore (flags); - - /* Send characters. */ - while (count > 0) { - int ch = *s++; - - if (ch == '\n') { - /* We don't have the benefit of a tty - driver, so translate NL into CR LF. */ - v850e_uart_wait_for_xmit_ok (chan); - v850e_uart_putc (chan, '\r'); - } - - v850e_uart_wait_for_xmit_ok (chan); - v850e_uart_putc (chan, ch); - - count--; - } - - /* Restore saved tx interrupt status. */ - if (irq_was_enabled) { - /* Wait for the last character we sent to be - completely transmitted (as we'll get an - interrupt interrupt at that point). */ - v850e_uart_wait_for_xmit_done (chan); - /* Clear pending interrupts received due - to our transmission, unless there was already - one pending, in which case we want the - handler to be called. */ - if (! irq_was_pending) - v850e_intc_clear_pending_irq (irq); - /* ... and then turn back on handling. */ - v850e_intc_enable_irq (irq); - } - } -} - -extern struct uart_driver v850e_uart_driver; -static struct console v850e_uart_cons = -{ - .name = "ttyS", - .write = v850e_uart_cons_write, - .device = uart_console_device, - .flags = CON_PRINTBUFFER, - .cflag = V850E_UART_INIT_CFLAGS, - .index = -1, - .data = &v850e_uart_driver, -}; - -void v850e_uart_cons_init (unsigned chan) -{ - v850e_uart_configure (chan, V850E_UART_INIT_CFLAGS, - V850E_UART_INIT_BAUD); - v850e_uart_cons.index = chan; - register_console (&v850e_uart_cons); - printk ("Console: %s on-chip UART channel %d\n", - V850E_UART_CHIP_NAME, chan); -} - -/* This is what the init code actually calls. */ -static int v850e_uart_console_init (void) -{ - v850e_uart_cons_init (V850E_UART_CONSOLE_CHANNEL); - return 0; -} -console_initcall(v850e_uart_console_init); - -#define V850E_UART_CONSOLE &v850e_uart_cons - -#else /* !CONFIG_V850E_UART_CONSOLE */ -#define V850E_UART_CONSOLE 0 -#endif /* CONFIG_V850E_UART_CONSOLE */ - -/* TX/RX interrupt handlers. */ - -static void v850e_uart_stop_tx (struct uart_port *port); - -void v850e_uart_tx (struct uart_port *port) -{ - struct circ_buf *xmit = &port->info->xmit; - int stopped = uart_tx_stopped (port); - - if (v850e_uart_xmit_ok (port->line)) { - int tx_ch; - - if (port->x_char) { - tx_ch = port->x_char; - port->x_char = 0; - } else if (!uart_circ_empty (xmit) && !stopped) { - tx_ch = xmit->buf[xmit->tail]; - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - } else - goto no_xmit; - - v850e_uart_putc (port->line, tx_ch); - port->icount.tx++; - - if (uart_circ_chars_pending (xmit) < WAKEUP_CHARS) - uart_write_wakeup (port); - } - - no_xmit: - if (uart_circ_empty (xmit) || stopped) - v850e_uart_stop_tx (port, stopped); -} - -static irqreturn_t v850e_uart_tx_irq(int irq, void *data) -{ - struct uart_port *port = data; - v850e_uart_tx (port); - return IRQ_HANDLED; -} - -static irqreturn_t v850e_uart_rx_irq(int irq, void *data) -{ - struct uart_port *port = data; - unsigned ch_stat = TTY_NORMAL; - unsigned ch = v850e_uart_getc (port->line); - unsigned err = v850e_uart_err (port->line); - - if (err) { - if (err & V850E_UART_ERR_OVERRUN) { - ch_stat = TTY_OVERRUN; - port->icount.overrun++; - } else if (err & V850E_UART_ERR_FRAME) { - ch_stat = TTY_FRAME; - port->icount.frame++; - } else if (err & V850E_UART_ERR_PARITY) { - ch_stat = TTY_PARITY; - port->icount.parity++; - } - } - - port->icount.rx++; - - tty_insert_flip_char (port->info->port.tty, ch, ch_stat); - tty_schedule_flip (port->info->port.tty); - - return IRQ_HANDLED; -} - - -/* Control functions for the serial framework. */ - -static void v850e_uart_nop (struct uart_port *port) { } -static int v850e_uart_success (struct uart_port *port) { return 0; } - -static unsigned v850e_uart_tx_empty (struct uart_port *port) -{ - return TIOCSER_TEMT; /* Can't detect. */ -} - -static void v850e_uart_set_mctrl (struct uart_port *port, unsigned mctrl) -{ -#ifdef V850E_UART_SET_RTS - V850E_UART_SET_RTS (port->line, (mctrl & TIOCM_RTS)); -#endif -} - -static unsigned v850e_uart_get_mctrl (struct uart_port *port) -{ - /* We don't support DCD or DSR, so consider them permanently active. */ - int mctrl = TIOCM_CAR | TIOCM_DSR; - - /* We may support CTS. */ -#ifdef V850E_UART_CTS - mctrl |= V850E_UART_CTS(port->line) ? TIOCM_CTS : 0; -#else - mctrl |= TIOCM_CTS; -#endif - - return mctrl; -} - -static void v850e_uart_start_tx (struct uart_port *port) -{ - v850e_intc_disable_irq (V850E_UART_TX_IRQ (port->line)); - v850e_uart_tx (port); - v850e_intc_enable_irq (V850E_UART_TX_IRQ (port->line)); -} - -static void v850e_uart_stop_tx (struct uart_port *port) -{ - v850e_intc_disable_irq (V850E_UART_TX_IRQ (port->line)); -} - -static void v850e_uart_start_rx (struct uart_port *port) -{ - v850e_intc_enable_irq (V850E_UART_RX_IRQ (port->line)); -} - -static void v850e_uart_stop_rx (struct uart_port *port) -{ - v850e_intc_disable_irq (V850E_UART_RX_IRQ (port->line)); -} - -static void v850e_uart_break_ctl (struct uart_port *port, int break_ctl) -{ - /* Umm, do this later. */ -} - -static int v850e_uart_startup (struct uart_port *port) -{ - int err; - - /* Alloc RX irq. */ - err = request_irq (V850E_UART_RX_IRQ (port->line), v850e_uart_rx_irq, - IRQF_DISABLED, "v850e_uart", port); - if (err) - return err; - - /* Alloc TX irq. */ - err = request_irq (V850E_UART_TX_IRQ (port->line), v850e_uart_tx_irq, - IRQF_DISABLED, "v850e_uart", port); - if (err) { - free_irq (V850E_UART_RX_IRQ (port->line), port); - return err; - } - - v850e_uart_start_rx (port); - - return 0; -} - -static void v850e_uart_shutdown (struct uart_port *port) -{ - /* Disable port interrupts. */ - free_irq (V850E_UART_TX_IRQ (port->line), port); - free_irq (V850E_UART_RX_IRQ (port->line), port); - - /* Turn off xmit/recv enable bits. */ - V850E_UART_CONFIG (port->line) - &= ~(V850E_UART_CONFIG_TX_ENABLE - | V850E_UART_CONFIG_RX_ENABLE); - /* Then reset the channel. */ - V850E_UART_CONFIG (port->line) = 0; -} - -static void -v850e_uart_set_termios (struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - unsigned cflags = termios->c_cflag; - - /* Restrict flags to legal values. */ - if ((cflags & CSIZE) != CS7 && (cflags & CSIZE) != CS8) - /* The new value of CSIZE is invalid, use the old value. */ - cflags = (cflags & ~CSIZE) - | (old ? (old->c_cflag & CSIZE) : CS8); - - termios->c_cflag = cflags; - - v850e_uart_configure (port->line, cflags, - uart_get_baud_rate (port, termios, old, - v850e_uart_min_baud(), - v850e_uart_max_baud())); -} - -static const char *v850e_uart_type (struct uart_port *port) -{ - return port->type == PORT_V850E_UART ? "v850e_uart" : 0; -} - -static void v850e_uart_config_port (struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE) - port->type = PORT_V850E_UART; -} - -static int -v850e_uart_verify_port (struct uart_port *port, struct serial_struct *ser) -{ - if (ser->type != PORT_UNKNOWN && ser->type != PORT_V850E_UART) - return -EINVAL; - if (ser->irq != V850E_UART_TX_IRQ (port->line)) - return -EINVAL; - return 0; -} - -static struct uart_ops v850e_uart_ops = { - .tx_empty = v850e_uart_tx_empty, - .get_mctrl = v850e_uart_get_mctrl, - .set_mctrl = v850e_uart_set_mctrl, - .start_tx = v850e_uart_start_tx, - .stop_tx = v850e_uart_stop_tx, - .stop_rx = v850e_uart_stop_rx, - .enable_ms = v850e_uart_nop, - .break_ctl = v850e_uart_break_ctl, - .startup = v850e_uart_startup, - .shutdown = v850e_uart_shutdown, - .set_termios = v850e_uart_set_termios, - .type = v850e_uart_type, - .release_port = v850e_uart_nop, - .request_port = v850e_uart_success, - .config_port = v850e_uart_config_port, - .verify_port = v850e_uart_verify_port, -}; - -/* Initialization and cleanup. */ - -static struct uart_driver v850e_uart_driver = { - .owner = THIS_MODULE, - .driver_name = "v850e_uart", - .dev_name = "ttyS", - .major = TTY_MAJOR, - .minor = V850E_UART_MINOR_BASE, - .nr = V850E_UART_NUM_CHANNELS, - .cons = V850E_UART_CONSOLE, -}; - - -static struct uart_port v850e_uart_ports[V850E_UART_NUM_CHANNELS]; - -static int __init v850e_uart_init (void) -{ - int rval; - - printk (KERN_INFO "%s on-chip UART\n", V850E_UART_CHIP_NAME); - - rval = uart_register_driver (&v850e_uart_driver); - if (rval == 0) { - unsigned chan; - - for (chan = 0; chan < V850E_UART_NUM_CHANNELS; chan++) { - struct uart_port *port = &v850e_uart_ports[chan]; - - memset (port, 0, sizeof *port); - - port->ops = &v850e_uart_ops; - port->line = chan; - port->iotype = UPIO_MEM; - port->flags = UPF_BOOT_AUTOCONF; - - /* We actually use multiple IRQs, but the serial - framework seems to mainly use this for - informational purposes anyway. Here we use the TX - irq. */ - port->irq = V850E_UART_TX_IRQ (chan); - - /* The serial framework doesn't really use these - membase/mapbase fields for anything useful, but - it requires that they be something non-zero to - consider the port `valid', and also uses them - for informational purposes. */ - port->membase = (void *)V850E_UART_BASE_ADDR (chan); - port->mapbase = V850E_UART_BASE_ADDR (chan); - - /* The framework insists on knowing the uart's master - clock freq, though it doesn't seem to do anything - useful for us with it. We must make it at least - higher than (the maximum baud rate * 16), otherwise - the framework will puke during its internal - calculations, and force the baud rate to be 9600. - To be accurate though, just repeat the calculation - we use when actually setting the speed. */ - port->uartclk = v850e_uart_max_clock() * 16; - - uart_add_one_port (&v850e_uart_driver, port); - } - } - - return rval; -} - -static void __exit v850e_uart_exit (void) -{ - unsigned chan; - - for (chan = 0; chan < V850E_UART_NUM_CHANNELS; chan++) - uart_remove_one_port (&v850e_uart_driver, - &v850e_uart_ports[chan]); - - uart_unregister_driver (&v850e_uart_driver); -} - -module_init (v850e_uart_init); -module_exit (v850e_uart_exit); - -MODULE_AUTHOR ("Miles Bader"); -MODULE_DESCRIPTION ("NEC " V850E_UART_CHIP_NAME " on-chip UART"); -MODULE_LICENSE ("GPL"); -- cgit v1.2.3 From b1cbefe5d5fc2d4a6109961d914027172ce8e152 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 4 Aug 2008 17:22:11 +0100 Subject: blackfin: Fix compile failure in tty code Blackfin peers into the ldisc in an odd way for IRDA snooping which therefore got missed. Simple enough fix. Closes bug #11233 Signed-off-by: Linus Torvalds --- drivers/serial/bfin_5xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/serial') diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 9d8543762a3..efcd44344fb 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -817,7 +817,7 @@ static void bfin_serial_set_ldisc(struct uart_port *port) if (line >= port->info->port.tty->driver->num) return; - switch (port->info->port.tty->ldisc.num) { + switch (port->info->port.tty->termios->c_line) { case N_IRDA: val = UART_GET_GCTL(&bfin_serial_ports[line]); val |= (IREN | RPOLC); -- cgit v1.2.3 From d7283353221e73a793847252d063ff9186885160 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 4 Aug 2008 17:21:18 +0100 Subject: cris: Fixup compile problems It now compiles with the tty changes but isn't tested (which has to be better than not compiling.. Closes bug #11218 Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/crisv10.c | 79 ++++++++++++++++++++++++------------------------ drivers/serial/crisv10.h | 3 +- 2 files changed, 42 insertions(+), 40 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c index 8249ac49055..bf94a770bb4 100644 --- a/drivers/serial/crisv10.c +++ b/drivers/serial/crisv10.c @@ -234,7 +234,7 @@ unsigned long r_alt_ser_baudrate_shadow = 0; static struct e100_serial rs_table[] = { { .baud = DEF_BAUD, - .port = (unsigned char *)R_SERIAL0_CTRL, + .ioport = (unsigned char *)R_SERIAL0_CTRL, .irq = 1U << 12, /* uses DMA 6 and 7 */ .oclrintradr = R_DMA_CH6_CLR_INTR, .ofirstadr = R_DMA_CH6_FIRST, @@ -288,7 +288,7 @@ static struct e100_serial rs_table[] = { }, /* ttyS0 */ #ifndef CONFIG_SVINTO_SIM { .baud = DEF_BAUD, - .port = (unsigned char *)R_SERIAL1_CTRL, + .ioport = (unsigned char *)R_SERIAL1_CTRL, .irq = 1U << 16, /* uses DMA 8 and 9 */ .oclrintradr = R_DMA_CH8_CLR_INTR, .ofirstadr = R_DMA_CH8_FIRST, @@ -344,7 +344,7 @@ static struct e100_serial rs_table[] = { }, /* ttyS1 */ { .baud = DEF_BAUD, - .port = (unsigned char *)R_SERIAL2_CTRL, + .ioport = (unsigned char *)R_SERIAL2_CTRL, .irq = 1U << 4, /* uses DMA 2 and 3 */ .oclrintradr = R_DMA_CH2_CLR_INTR, .ofirstadr = R_DMA_CH2_FIRST, @@ -398,7 +398,7 @@ static struct e100_serial rs_table[] = { }, /* ttyS2 */ { .baud = DEF_BAUD, - .port = (unsigned char *)R_SERIAL3_CTRL, + .ioport = (unsigned char *)R_SERIAL3_CTRL, .irq = 1U << 8, /* uses DMA 4 and 5 */ .oclrintradr = R_DMA_CH4_CLR_INTR, .ofirstadr = R_DMA_CH4_FIRST, @@ -939,7 +939,7 @@ static const struct control_pins e100_modem_pins[NR_PORTS] = /* Output */ #define E100_RTS_GET(info) ((info)->rx_ctrl & E100_RTS_MASK) /* Input */ -#define E100_CTS_GET(info) ((info)->port[REG_STATUS] & E100_CTS_MASK) +#define E100_CTS_GET(info) ((info)->ioport[REG_STATUS] & E100_CTS_MASK) /* These are typically PA or PB and 0 means 0V, 1 means 3.3V */ /* Is an output */ @@ -1092,7 +1092,7 @@ e100_rts(struct e100_serial *info, int set) local_irq_save(flags); info->rx_ctrl &= ~E100_RTS_MASK; info->rx_ctrl |= (set ? 0 : E100_RTS_MASK); /* RTS is active low */ - info->port[REG_REC_CTRL] = info->rx_ctrl; + info->ioport[REG_REC_CTRL] = info->rx_ctrl; local_irq_restore(flags); #ifdef SERIAL_DEBUG_IO printk("ser%i rts %i\n", info->line, set); @@ -1142,7 +1142,7 @@ e100_disable_rx(struct e100_serial *info) { #ifndef CONFIG_SVINTO_SIM /* disable the receiver */ - info->port[REG_REC_CTRL] = + info->ioport[REG_REC_CTRL] = (info->rx_ctrl &= ~IO_MASK(R_SERIAL0_REC_CTRL, rec_enable)); #endif } @@ -1152,7 +1152,7 @@ e100_enable_rx(struct e100_serial *info) { #ifndef CONFIG_SVINTO_SIM /* enable the receiver */ - info->port[REG_REC_CTRL] = + info->ioport[REG_REC_CTRL] = (info->rx_ctrl |= IO_MASK(R_SERIAL0_REC_CTRL, rec_enable)); #endif } @@ -1490,7 +1490,7 @@ rs_stop(struct tty_struct *tty) xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable); } - *((unsigned long *)&info->port[REG_XOFF]) = xoff; + *((unsigned long *)&info->ioport[REG_XOFF]) = xoff; local_irq_restore(flags); } } @@ -1513,7 +1513,7 @@ rs_start(struct tty_struct *tty) xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable); } - *((unsigned long *)&info->port[REG_XOFF]) = xoff; + *((unsigned long *)&info->ioport[REG_XOFF]) = xoff; if (!info->uses_dma_out && info->xmit.head != info->xmit.tail && info->xmit.buf) e100_enable_serial_tx_ready_irq(info); @@ -1888,7 +1888,7 @@ static void receive_chars_dma(struct e100_serial *info) handle_all_descr_data(info); /* Read the status register to detect errors */ - rstat = info->port[REG_STATUS]; + rstat = info->ioport[REG_STATUS]; if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) { DFLOW(DEBUG_LOG(info->line, "XOFF detect stat %x\n", rstat)); } @@ -1897,7 +1897,7 @@ static void receive_chars_dma(struct e100_serial *info) /* If we got an error, we must reset it by reading the * data_in field */ - unsigned char data = info->port[REG_DATA]; + unsigned char data = info->ioport[REG_DATA]; PROCSTAT(ser_stat[info->line].errors_cnt++); DEBUG_LOG(info->line, "#dERR: s d 0x%04X\n", @@ -2077,7 +2077,7 @@ static int force_eop_if_needed(struct e100_serial *info) /* We check data_avail bit to determine if data has * arrived since last time */ - unsigned char rstat = info->port[REG_STATUS]; + unsigned char rstat = info->ioport[REG_STATUS]; /* error or datavail? */ if (rstat & SER_ERROR_MASK) { @@ -2096,7 +2096,7 @@ static int force_eop_if_needed(struct e100_serial *info) TIMERD(DEBUG_LOG(info->line, "timeout: rstat 0x%03X\n", rstat | (info->line << 8))); /* Read data to clear status flags */ - (void)info->port[REG_DATA]; + (void)info->ioport[REG_DATA]; info->forced_eop = 0; START_FLUSH_FAST_TIMER(info, "magic"); @@ -2296,7 +2296,7 @@ struct e100_serial * handle_ser_rx_interrupt_no_dma(struct e100_serial *info) } /* Read data and status at the same time */ - data_read = *((unsigned long *)&info->port[REG_DATA_STATUS32]); + data_read = *((unsigned long *)&info->ioport[REG_DATA_STATUS32]); more_data: if (data_read & IO_MASK(R_SERIAL0_READ, xoff_detect) ) { DFLOW(DEBUG_LOG(info->line, "XOFF detect\n", 0)); @@ -2391,7 +2391,7 @@ more_data: info->icount.rx++; - data_read = *((unsigned long *)&info->port[REG_DATA_STATUS32]); + data_read = *((unsigned long *)&info->ioport[REG_DATA_STATUS32]); if (data_read & IO_MASK(R_SERIAL0_READ, data_avail)) { DEBUG_LOG(info->line, "ser_rx %c in loop\n", IO_EXTRACT(R_SERIAL0_READ, data_in, data_read)); goto more_data; @@ -2413,7 +2413,7 @@ static struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info) return handle_ser_rx_interrupt_no_dma(info); } /* DMA is used */ - rstat = info->port[REG_STATUS]; + rstat = info->ioport[REG_STATUS]; if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) { DFLOW(DEBUG_LOG(info->line, "XOFF detect\n", 0)); } @@ -2426,7 +2426,7 @@ static struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info) /* If we got an error, we must reset it by reading the * data_in field */ - data = info->port[REG_DATA]; + data = info->ioport[REG_DATA]; DINTR1(DEBUG_LOG(info->line, "ser_rx! %c\n", data)); DINTR1(DEBUG_LOG(info->line, "ser_rx err stat %02X\n", rstat)); if (!data && (rstat & SER_FRAMING_ERR_MASK)) { @@ -2528,10 +2528,10 @@ static void handle_ser_tx_interrupt(struct e100_serial *info) unsigned char rstat; DFLOW(DEBUG_LOG(info->line, "tx_int: xchar 0x%02X\n", info->x_char)); local_irq_save(flags); - rstat = info->port[REG_STATUS]; + rstat = info->ioport[REG_STATUS]; DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat)); - info->port[REG_TR_DATA] = info->x_char; + info->ioport[REG_TR_DATA] = info->x_char; info->icount.tx++; info->x_char = 0; /* We must enable since it is disabled in ser_interrupt */ @@ -2545,7 +2545,7 @@ static void handle_ser_tx_interrupt(struct e100_serial *info) /* We only use normal tx interrupt when sending x_char */ DFLOW(DEBUG_LOG(info->line, "tx_int: xchar sent\n", 0)); local_irq_save(flags); - rstat = info->port[REG_STATUS]; + rstat = info->ioport[REG_STATUS]; DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat)); e100_disable_serial_tx_ready_irq(info); if (info->port.tty->stopped) @@ -2573,7 +2573,7 @@ static void handle_ser_tx_interrupt(struct e100_serial *info) DINTR2(DEBUG_LOG(info->line, "tx_int %c\n", info->xmit.buf[info->xmit.tail])); /* Send a byte, rs485 timing is critical so turn of ints */ local_irq_save(flags); - info->port[REG_TR_DATA] = info->xmit.buf[info->xmit.tail]; + info->ioport[REG_TR_DATA] = info->xmit.buf[info->xmit.tail]; info->xmit.tail = (info->xmit.tail + 1) & (SERIAL_XMIT_SIZE-1); info->icount.tx++; if (info->xmit.head == info->xmit.tail) { @@ -2848,7 +2848,7 @@ startup(struct e100_serial * info) /* dummy read to reset any serial errors */ - (void)info->port[REG_DATA]; + (void)info->ioport[REG_DATA]; /* enable the interrupts */ if (info->uses_dma_out) @@ -2897,7 +2897,7 @@ shutdown(struct e100_serial * info) /* shut down the transmitter and receiver */ DFLOW(DEBUG_LOG(info->line, "shutdown %i\n", info->line)); e100_disable_rx(info); - info->port[REG_TR_CTRL] = (info->tx_ctrl &= ~0x40); + info->ioport[REG_TR_CTRL] = (info->tx_ctrl &= ~0x40); /* disable interrupts, reset dma channels */ if (info->uses_dma_in) { @@ -2968,7 +2968,7 @@ change_speed(struct e100_serial *info) if (!info->port.tty || !info->port.tty->termios) return; - if (!info->port) + if (!info->ioport) return; cflag = info->port.tty->termios->c_cflag; @@ -3037,7 +3037,7 @@ change_speed(struct e100_serial *info) info->baud = cflag_to_baud(cflag); #ifndef CONFIG_SVINTO_SIM - info->port[REG_BAUD] = cflag_to_etrax_baud(cflag); + info->ioport[REG_BAUD] = cflag_to_etrax_baud(cflag); #endif /* CONFIG_SVINTO_SIM */ } @@ -3097,8 +3097,8 @@ change_speed(struct e100_serial *info) /* actually write the control regs to the hardware */ - info->port[REG_TR_CTRL] = info->tx_ctrl; - info->port[REG_REC_CTRL] = info->rx_ctrl; + info->ioport[REG_TR_CTRL] = info->tx_ctrl; + info->ioport[REG_REC_CTRL] = info->rx_ctrl; xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(info->port.tty)); xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable); if (info->port.tty->termios->c_iflag & IXON ) { @@ -3107,7 +3107,7 @@ change_speed(struct e100_serial *info) xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable); } - *((unsigned long *)&info->port[REG_XOFF]) = xoff; + *((unsigned long *)&info->ioport[REG_XOFF]) = xoff; local_irq_restore(flags); #endif /* !CONFIG_SVINTO_SIM */ @@ -3156,7 +3156,7 @@ static int rs_raw_write(struct tty_struct *tty, #ifdef SERIAL_DEBUG_DATA if (info->line == SERIAL_DEBUG_LINE) printk("rs_raw_write (%d), status %d\n", - count, info->port[REG_STATUS]); + count, info->ioport[REG_STATUS]); #endif #ifdef CONFIG_SVINTO_SIM @@ -3427,7 +3427,7 @@ get_serial_info(struct e100_serial * info, memset(&tmp, 0, sizeof(tmp)); tmp.type = info->type; tmp.line = info->line; - tmp.port = (int)info->port; + tmp.port = (int)info->ioport; tmp.irq = info->irq; tmp.flags = info->flags; tmp.baud_base = info->baud_base; @@ -3557,14 +3557,14 @@ char *get_control_state_str(int MLines, char *s) } #endif -static void +static int rs_break(struct tty_struct *tty, int break_state) { struct e100_serial *info = (struct e100_serial *)tty->driver_data; unsigned long flags; - if (!info->port) - return; + if (!info->ioport) + return -EIO; local_irq_save(flags); if (break_state == -1) { @@ -3575,8 +3575,9 @@ rs_break(struct tty_struct *tty, int break_state) /* Set bit 7 (txd) and 6 (tr_enable) */ info->tx_ctrl |= (0x80 | 0x40); } - info->port[REG_TR_CTRL] = info->tx_ctrl; + info->ioport[REG_TR_CTRL] = info->tx_ctrl; local_irq_restore(flags); + return 0; } static int @@ -4231,9 +4232,9 @@ static int line_info(char *buf, struct e100_serial *info) unsigned long tmp; ret = sprintf(buf, "%d: uart:E100 port:%lX irq:%d", - info->line, (unsigned long)info->port, info->irq); + info->line, (unsigned long)info->ioport, info->irq); - if (!info->port || (info->type == PORT_UNKNOWN)) { + if (!info->ioport || (info->type == PORT_UNKNOWN)) { ret += sprintf(buf+ret, "\n"); return ret; } @@ -4281,7 +4282,7 @@ static int line_info(char *buf, struct e100_serial *info) } { - unsigned char rstat = info->port[REG_STATUS]; + unsigned char rstat = info->ioport[REG_STATUS]; if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) ret += sprintf(buf+ret, " xoff_detect:1"); } @@ -4502,7 +4503,7 @@ rs_init(void) if (info->enabled) { printk(KERN_INFO "%s%d at 0x%x is a builtin UART with DMA\n", - serial_driver->name, info->line, (unsigned int)info->port); + serial_driver->name, info->line, (unsigned int)info->ioport); } } #ifdef CONFIG_ETRAX_FAST_TIMER diff --git a/drivers/serial/crisv10.h b/drivers/serial/crisv10.h index ccd0f32b737..e3c5c8c3c09 100644 --- a/drivers/serial/crisv10.h +++ b/drivers/serial/crisv10.h @@ -36,8 +36,9 @@ struct etrax_recv_buffer { }; struct e100_serial { + struct tty_port port; int baud; - volatile u8 *port; /* R_SERIALx_CTRL */ + volatile u8 *ioport; /* R_SERIALx_CTRL */ u32 irq; /* bitnr in R_IRQ_MASK2 for dmaX_descr */ /* Output registers */ -- cgit v1.2.3