From 752b940359089ee1bcaceeb5c62d626a92586ba2 Mon Sep 17 00:00:00 2001 From: Ryan Bradetich Date: Thu, 9 Nov 2006 04:45:08 +0000 Subject: [PARISC] [MUX] Detect multiple cards in the correct order This patch follows the example of the 8250_gsc driver by probing for specific built-in Mux cards first. This allows the system to preserve the correct detection order with multiple Mux cards. Signed-off-by: Ryan Bradetich Signed-off-by: Kyle McMartin --- drivers/serial/mux.c | 38 ++++++++++++++++++++++++++++++-------- 1 file changed, 30 insertions(+), 8 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c index 5ff7e05a152..87269cca9c7 100644 --- a/drivers/serial/mux.c +++ b/drivers/serial/mux.c @@ -453,7 +453,7 @@ static int __init mux_probe(struct parisc_device *dev) } port_count = GET_MUX_PORTS(iodc_data); - printk(KERN_INFO "Serial mux driver (%d ports) Revision: 0.5\n", port_count); + printk(KERN_INFO "Serial mux driver (%d ports) Revision: 0.6\n", port_count); dev_set_drvdata(&dev->dev, (void *)(long)port_count); request_mem_region(dev->hpa.start + MUX_OFFSET, @@ -491,6 +491,7 @@ static int __init mux_probe(struct parisc_device *dev) */ port->timeout = HZ / 50; spin_lock_init(&port->lock); + status = uart_add_one_port(&mux_driver, port); BUG_ON(status); } @@ -500,12 +501,9 @@ static int __init mux_probe(struct parisc_device *dev) static int __devexit mux_remove(struct parisc_device *dev) { - int i; + int i, j; int port_count = (long)dev_get_drvdata(&dev->dev); - /* Delete the Mux timer. */ - del_timer(&mux_timer); - /* Find Port 0 for this card in the mux_ports list. */ for(i = 0; i < port_cnt; ++i) { if(mux_ports[i].port.mapbase == dev->hpa.start + MUX_OFFSET) @@ -514,7 +512,7 @@ static int __devexit mux_remove(struct parisc_device *dev) BUG_ON(i + port_count > port_cnt); /* Release the resources associated with each port on the device. */ - for(; i < port_count; ++i) { + for(j = 0; j < port_count; ++j, ++i) { struct uart_port *port = &mux_ports[i].port; uart_remove_one_port(&mux_driver, port); @@ -526,13 +524,35 @@ static int __devexit mux_remove(struct parisc_device *dev) return 0; } +/* Hack. This idea was taken from the 8250_gsc.c on how to properly order + * the serial port detection in the proper order. The idea is we always + * want the builtin mux to be detected before addin mux cards, so we + * specifically probe for the builtin mux cards first. + * + * This table only contains the parisc_device_id of known builtin mux + * devices. All other mux cards will be detected by the generic mux_tbl. + */ +static struct parisc_device_id builtin_mux_tbl[] = { + { HPHW_A_DIRECT, HVERSION_REV_ANY_ID, 0x15, 0x0000D }, /* All K-class */ + { HPHW_A_DIRECT, HVERSION_REV_ANY_ID, 0x44, 0x0000D }, /* E35, E45, and E55 */ + { 0, } +}; + static struct parisc_device_id mux_tbl[] = { { HPHW_A_DIRECT, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0000D }, { 0, } }; +MODULE_DEVICE_TABLE(parisc, builtin_mux_tbl); MODULE_DEVICE_TABLE(parisc, mux_tbl); +static struct parisc_driver builtin_serial_mux_driver = { + .name = "builtin_serial_mux", + .id_table = builtin_mux_tbl, + .probe = mux_probe, + .remove = __devexit_p(mux_remove), +}; + static struct parisc_driver serial_mux_driver = { .name = "serial_mux", .id_table = mux_tbl, @@ -547,7 +567,8 @@ static struct parisc_driver serial_mux_driver = { */ static int __init mux_init(void) { - int status = register_parisc_driver(&serial_mux_driver); + register_parisc_driver(&builtin_serial_mux_driver); + register_parisc_driver(&serial_mux_driver); if(port_cnt > 0) { /* Start the Mux timer */ @@ -560,7 +581,7 @@ static int __init mux_init(void) #endif } - return status; + return 0; } /** @@ -578,6 +599,7 @@ static void __exit mux_exit(void) #endif } + unregister_parisc_driver(&builtin_serial_mux_driver); unregister_parisc_driver(&serial_mux_driver); uart_unregister_driver(&mux_driver); } -- cgit v1.2.3