From ccf06998fe179ae2cc9517ed1d75433dc0b5032d Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 20 May 2006 15:00:15 -0700 Subject: [PATCH] spi: add spi master driver for Freescale MPC83xx SPI controller This driver supports the SPI controller on the MPC83xx SoC devices from Freescale. Note, this driver supports only the simple shift register SPI controller and not the descriptor based CPM or QUICCEngine SPI controller. Signed-off-by: Kumar Gala Signed-off-by: David Brownell Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/Kconfig | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers/spi/Kconfig') diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 9ce1d01469b..3867c6ef24f 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -75,6 +75,18 @@ config SPI_BUTTERFLY inexpensive battery powered microcontroller evaluation board. This same cable can be used to flash new firmware. +config SPI_MPC83xx + tristate "Freescale MPC83xx SPI controller" + depends on SPI_MASTER && PPC_83xx && EXPERIMENTAL + select SPI_BITBANG + help + This enables using the Freescale MPC83xx SPI controller in master + mode. + + Note, this driver uniquely supports the SPI controller on the MPC83xx + family of PowerPC processors. The MPC83xx uses a simple set of shift + registers for data (opposed to the CPM based descriptor model). + config SPI_PXA2XX tristate "PXA2xx SSP SPI master" depends on SPI_MASTER && ARCH_PXA && EXPERIMENTAL -- cgit v1.2.3