From 5f53d8ca3d5d6afa55011e1e858a4bf255a3abf4 Mon Sep 17 00:00:00 2001 From: Jerry Chuang Date: Thu, 21 May 2009 22:16:02 -0700 Subject: Staging: add rtl8192SU wireless usb driver Driver from Realtek for the Realtek RTL8192 USB wifi device Based on the r8187 driver from Andrea Merello and others. Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8192su/r8192S_hw.h | 1677 +++++++++++++++++++++++++++++++++ 1 file changed, 1677 insertions(+) create mode 100644 drivers/staging/rtl8192su/r8192S_hw.h (limited to 'drivers/staging/rtl8192su/r8192S_hw.h') diff --git a/drivers/staging/rtl8192su/r8192S_hw.h b/drivers/staging/rtl8192su/r8192S_hw.h new file mode 100644 index 00000000000..7a3d850de0b --- /dev/null +++ b/drivers/staging/rtl8192su/r8192S_hw.h @@ -0,0 +1,1677 @@ +/***************************************************************************** + * Copyright(c) 2008, RealTEK Technology Inc. All Right Reserved. + * + * Module: __INC_HAL8192SEREG_H + * + * + * Note: 1. Define Mac register address and corresponding bit mask map + * 2. CCX register + * 3. Backward compatible register with useless address. + * 4. Define 92SU required register address and definition. + * + * + * Export: Constants, macro, functions(API), global variables(None). + * + * Abbrev: + * + * History: + * Data Who Remark + * 08/07/2007 MHC 1. Porting from 9x series PHYCFG.h. + * 2. Reorganize code architecture. + * + *****************************************************************************/ +#ifndef R8192S_HW +#define R8192S_HW + +typedef enum _VERSION_8192S{ + VERSION_8192S_ACUT, + VERSION_8192S_BCUT, + VERSION_8192S_CCUT +}VERSION_8192S,*PVERSION_8192S; + +//#ifdef RTL8192SU +typedef enum _VERSION_8192SUsb{ + VERSION_8192SU_A, //A-Cut + VERSION_8192SU_B, //B-Cut + VERSION_8192SU_C, //C-Cut +}VERSION_8192SUsb, *PVERSION_8192SUsb; +//#else +typedef enum _VERSION_819xU{ + VERSION_819xU_A, // A-cut + VERSION_819xU_B, // B-cut + VERSION_819xU_C,// C-cut +}VERSION_819xU,*PVERSION_819xU; +//#endif + +/* 2007/11/15 MH Define different RF type. */ +typedef enum _RT_RF_TYPE_DEFINITION +{ + RF_1T2R = 0, + RF_2T4R, + RF_2T2R, +#ifdef RTL8192SU + RF_1T1R, + RF_2T2R_GREEN, +#endif + //RF_3T3R, + //RF_3T4R, + //RF_4T4R, + RF_819X_MAX_TYPE +}RT_RF_TYPE_DEF_E; + +typedef enum _BaseBand_Config_Type{ + BaseBand_Config_PHY_REG = 0, //Radio Path A + BaseBand_Config_AGC_TAB = 1, //Radio Path B +}BaseBand_Config_Type, *PBaseBand_Config_Type; + +#if 0 +typedef enum _RT_RF_TYPE_819xU{ + RF_TYPE_MIN = 0, + RF_8225, + RF_8256, + RF_8258, + RF_PSEUDO_11N = 4, +}RT_RF_TYPE_819xU, *PRT_RF_TYPE_819xU; +#endif + +#define RTL8187_REQT_READ 0xc0 +#define RTL8187_REQT_WRITE 0x40 +#define RTL8187_REQ_GET_REGS 0x05 +#define RTL8187_REQ_SET_REGS 0x05 + +#define MAX_TX_URB 5 +#define MAX_RX_URB 16 + +#define R8180_MAX_RETRY 255 +//#define MAX_RX_NORMAL_URB 3 +//#define MAX_RX_COMMAND_URB 2 +#define RX_URB_SIZE 9100 + +#define BB_ANTATTEN_CHAN14 0x0c +#define BB_ANTENNA_B 0x40 + +#define BB_HOST_BANG (1<<30) +#define BB_HOST_BANG_EN (1<<2) +#define BB_HOST_BANG_CLK (1<<1) +#define BB_HOST_BANG_RW (1<<3) +#define BB_HOST_BANG_DATA 1 + + +//============================================================ +// 8192S Regsiter bit +//============================================================ +#define BB_GLOBAL_RESET_BIT 0x1 + +#define CR_RST 0x10 +#define CR_RE 0x08 +#define CR_TE 0x04 +#define CR_MulRW 0x01 + +#define MAC_FILTER_MASK ((1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<5) | \ + (1<<12) | (1<<18) | (1<<19) | (1<<20) | (1<<21) | (1<<22) | (1<<23)) + +#define RX_FIFO_THRESHOLD_MASK ((1<<13) | (1<<14) | (1<<15)) +#define RX_FIFO_THRESHOLD_SHIFT 13 +#define RX_FIFO_THRESHOLD_128 3 +#define RX_FIFO_THRESHOLD_256 4 +#define RX_FIFO_THRESHOLD_512 5 +#define RX_FIFO_THRESHOLD_1024 6 +#define RX_FIFO_THRESHOLD_NONE 7 + +#define MAX_RX_DMA_MASK ((1<<8) | (1<<9) | (1<<10)) + +//---------------------------------------------------------------------------- +// 8190 CPU General Register (offset 0x100, 4 byte) +//---------------------------------------------------------------------------- +#define CPU_CCK_LOOPBACK 0x00030000 +#define CPU_GEN_SYSTEM_RESET 0x00000001 +#define CPU_GEN_FIRMWARE_RESET 0x00000008 +#define CPU_GEN_BOOT_RDY 0x00000010 +#define CPU_GEN_FIRM_RDY 0x00000020 +#define CPU_GEN_PUT_CODE_OK 0x00000080 +#define CPU_GEN_BB_RST 0x00000100 +#define CPU_GEN_PWR_STB_CPU 0x00000004 +#define CPU_GEN_NO_LOOPBACK_MSK 0xFFF8FFFF // Set bit18,17,16 to 0. Set bit19 +#define CPU_GEN_NO_LOOPBACK_SET 0x00080000 // Set BIT19 to 1 +//---------------------------------------------------------------------------- +//// +//// 8190 AcmHwCtrl bits (offset 0x171, 1 byte) +////---------------------------------------------------------------------------- +#define MSR_LINK_MASK ((1<<0)|(1<<1)) +#define MSR_LINK_MANAGED 2 +#define MSR_LINK_NONE 0 +#define MSR_LINK_SHIFT 0 +#define MSR_LINK_ADHOC 1 +#define MSR_LINK_MASTER 3 +#define MSR_LINK_ENEDCA (1<<4) + + +//#define Cmd9346CR_9356SEL (1<<4) +#define EPROM_CMD_RESERVED_MASK (1<<5) +#define EPROM_CMD_OPERATING_MODE_SHIFT 6 +#define EPROM_CMD_OPERATING_MODE_MASK ((1<<7)|(1<<6)) +#define EPROM_CMD_CONFIG 0x3 +#define EPROM_CMD_NORMAL 0 +#define EPROM_CMD_LOAD 1 +#define EPROM_CMD_PROGRAM 2 +#define EPROM_CS_SHIFT 3 +#define EPROM_CK_SHIFT 2 +#define EPROM_W_SHIFT 1 +#define EPROM_R_SHIFT 0 + +//#define MAC0 0x000, +//#define MAC1 0x001, +//#define MAC2 0x002, +//#define MAC3 0x003, +//#define MAC4 0x004, +//#define MAC5 0x005, + +//============================================================ +// 8192S Regsiter offset definition +//============================================================ + +// +// MAC register 0x0 - 0x5xx +// 1. System configuration registers. +// 2. Command Control Registers +// 3. MACID Setting Registers +// 4. Timing Control Registers +// 5. FIFO Control Registers +// 6. Adaptive Control Registers +// 7. EDCA Setting Registers +// 8. WMAC, BA and CCX related Register. +// 9. Security Control Registers +// 10. Power Save Control Registers +// 11. General Purpose Registers +// 12. Host Interrupt Status Registers +// 13. Test Mode and Debug Control Registers +// 14. PCIE config register +// + + +// +// 1. System Configuration Registers (Offset: 0x0000 - 0x003F) +// +#define SYS_ISO_CTRL 0x0000 // System Isolation Interface Control. +#define SYS_FUNC_EN 0x0002 // System Function Enable. +#define PMC_FSM 0x0004 // Power Sequence Control. +#define SYS_CLKR 0x0008 // System Clock. +#define EPROM_CMD 0x000A // 93C46/93C56 Command Register. (win CR93C46) +#define EE_VPD 0x000C // EEPROM VPD Data. +#define AFE_MISC 0x0010 // AFE Misc. +#define SPS0_CTRL 0x0011 // Switching Power Supply 0 Control. +#define SPS1_CTRL 0x0018 // Switching Power Supply 1 Control. +#define RF_CTRL 0x001F // RF Block Control. +#define LDOA15_CTRL 0x0020 // V15 Digital LDO Control. +#define LDOV12D_CTRL 0x0021 // V12 Digital LDO Control. +#define LDOHCI12_CTRL 0x0022 // V12 Digital LDO Control. +#define LDO_USB_SDIO 0x0023 // LDO USB Control. +#define LPLDO_CTRL 0x0024 // Low Power LDO Control. +#define AFE_XTAL_CTRL 0x0026 // AFE Crystal Control. +#define AFE_PLL_CTRL 0x0028 // System Function Enable. +#define EFUSE_CTRL 0x0030 // E-Fuse Control. +#define EFUSE_TEST 0x0034 // E-Fuse Test. +#define PWR_DATA 0x0038 // Power on date. +#define DBG_PORT 0x003A // MAC debug port select +#define DPS_TIMER 0x003C // Deep Power Save Timer Register. +#define RCLK_MON 0x003E // Retention Clock Monitor. + +// +// 2. Command Control Registers (Offset: 0x0040 - 0x004F) +// +#define CMDR 0x0040 // MAC Command Register. +#define TXPAUSE 0x0042 // Transmission Pause Register. +#define LBKMD_SEL 0x0043 // Loopback Mode Select Register. +#define TCR 0x0044 // Transmit Configuration Register +#define RCR 0x0048 // Receive Configuration Register +#define MSR 0x004C // Media Status register +#define SYSF_CFG 0x004D // System Function Configuration. +#define RX_PKY_LIMIT 0x004E // RX packet length limit +#define MBIDCTRL 0x004F // MBSSID Control. + +// +// 3. MACID Setting Registers (Offset: 0x0050 - 0x007F) +// +#define MACIDR 0x0050 // MAC ID Register, Offset 0x0050-0x0055 +#define MACIDR0 0x0050 // MAC ID Register, Offset 0x0050-0x0053 +#define MACIDR4 0x0054 // MAC ID Register, Offset 0x0054-0x0055 +#define BSSIDR 0x0058 // BSSID Register, Offset 0x0058-0x005D +#define HWVID 0x005E // HW Version ID. +#define MAR 0x0060 // Multicase Address. +#define MBIDCAMCONTENT 0x0068 // MBSSID CAM Content. +#define MBIDCAMCFG 0x0070 // MBSSID CAM Configuration. +#define BUILDTIME 0x0074 // Build Time Register. +#define BUILDUSER 0x0078 // Build User Register. + +// Redifine MACID register, to compatible prior ICs. +#define IDR0 MACIDR0 +#define IDR4 MACIDR4 + +// +// 4. Timing Control Registers (Offset: 0x0080 - 0x009F) +// +#define TSFR 0x0080 // Timing Sync Function Timer Register. +#define SLOT_TIME 0x0089 // Slot Time Register, in us. +#define USTIME 0x008A // EDCA/TSF clock unit time us unit. +#define SIFS_CCK 0x008C // SIFS for CCK, in us. +#define SIFS_OFDM 0x008E // SIFS for OFDM, in us. +#define PIFS_TIME 0x0090 // PIFS time register. +#define ACK_TIMEOUT 0x0091 // Ack Timeout Register +#define EIFSTR 0x0092 // EIFS time regiser. +#define BCN_INTERVAL 0x0094 // Beacon Interval, in TU. +#define ATIMWND 0x0096 // ATIM Window width, in TU. +#define BCN_DRV_EARLY_INT 0x0098 // Driver Early Interrupt. +#define BCN_DMATIME 0x009A // Beacon DMA and ATIM INT Time. +#define BCN_ERR_THRESH 0x009C // Beacon Error Threshold. +#define MLT 0x009D // MSDU Lifetime. +#define RSVD_MAC_TUNE_US 0x009E // MAC Internal USE. + +// +// 5. FIFO Control Registers (Offset: 0x00A0 - 0x015F) +// +#define RQPN 0x00A0 +#define RQPN1 0x00A0 // Reserved Queue Page Number for BK +#define RQPN2 0x00A1 // Reserved Queue Page Number for BE +#define RQPN3 0x00A2 // Reserved Queue Page Number for VI +#define RQPN4 0x00A3 // Reserved Queue Page Number for VO +#define RQPN5 0x00A4 // Reserved Queue Page Number for HCCA +#define RQPN6 0x00A5 // Reserved Queue Page Number for CMD +#define RQPN7 0x00A6 // Reserved Queue Page Number for MGNT +#define RQPN8 0x00A7 // Reserved Queue Page Number for HIGH +#define RQPN9 0x00A8 // Reserved Queue Page Number for Beacon +#define RQPN10 0x00A9 // Reserved Queue Page Number for Public +#define LD_RQPN 0x00AB // +#define RXFF_BNDY 0x00AC // +#define RXRPT_BNDY 0x00B0 // +#define TXPKTBUF_PGBNDY 0x00B4 // +#define PBP 0x00B5 // +#define RXDRVINFO_SZ 0x00B6 // +#define TXFF_STATUS 0x00B7 // +#define RXFF_STATUS 0x00B8 // +#define TXFF_EMPTY_TH 0x00B9 // +#define SDIO_RX_BLKSZ 0x00BC // +#define RXDMA 0x00BD // +#define RXPKT_NUM 0x00BE // +#define C2HCMD_UDT_SIZE 0x00C0 // +#define C2HCMD_UDT_ADDR 0x00C2 // +#define FIFOPAGE1 0x00C4 // Available public queue page number +#define FIFOPAGE2 0x00C8 // +#define FIFOPAGE3 0x00CC // +#define FIFOPAGE4 0x00D0 // +#define FIFOPAGE5 0x00D4 // +#define FW_RSVD_PG_CRTL 0x00D8 // +#define RXDMA_AGG_PG_TH 0x00D9 // +#define TXRPTFF_RDPTR 0x00E0 // +#define TXRPTFF_WTPTR 0x00E4 // +#define C2HFF_RDPTR 0x00E8 //FIFO Read pointer register. +#define C2HFF_WTPTR 0x00EC //FIFO Write pointer register. +#define RXFF0_RDPTR 0x00F0 // +#define RXFF0_WTPTR 0x00F4 // +#define RXFF1_RDPTR 0x00F8 // +#define RXFF1_WTPTR 0x00FC // +#define RXRPT0_RDPTR 0x0100 // +#define RXRPT0_WTPTR 0x0104 // +#define RXRPT1_RDPTR 0x0108 // +#define RXRPT1_WTPTR 0x010C // +#define RX0_UDT_SIZE 0x0110 // +#define RX1PKTNUM 0x0114 // +#define RXFILTERMAP 0x0116 // +#define RXFILTERMAP_GP1 0x0118 // +#define RXFILTERMAP_GP2 0x011A // +#define RXFILTERMAP_GP3 0x011C // +#define BCNQ_CTRL 0x0120 // +#define MGTQ_CTRL 0x0124 // +#define HIQ_CTRL 0x0128 // +#define VOTID7_CTRL 0x012c // +#define VOTID6_CTRL 0x0130 // +#define VITID5_CTRL 0x0134 // +#define VITID4_CTRL 0x0138 // +#define BETID3_CTRL 0x013c // +#define BETID0_CTRL 0x0140 // +#define BKTID2_CTRL 0x0144 // +#define BKTID1_CTRL 0x0148 // +#define CMDQ_CTRL 0x014c // +#define TXPKT_NUM_CTRL 0x0150 // +#define TXQ_PGADD 0x0152 // +#define TXFF_PG_NUM 0x0154 // +#define TRXDMA_STATUS 0x0156 // + +// +// 6. Adaptive Control Registers (Offset: 0x0160 - 0x01CF) +// +#define INIMCS_SEL 0x0160 // Init MCSrate for 32 MACID 0x160-17f +#define TX_RATE_REG INIMCS_SEL //Current Tx rate register +#define INIRTSMCS_SEL 0x0180 // Init RTSMCSrate +#define RRSR 0x0181 // Response rate setting. +#define ARFR0 0x0184 // Auto Rate Fallback 0 Register. +#define ARFR1 0x0188 // +#define ARFR2 0x018C // +#define ARFR3 0x0190 // +#define ARFR4 0x0194 // +#define ARFR5 0x0198 // +#define ARFR6 0x019C // +#define ARFR7 0x01A0 // +#define AGGLEN_LMT_H 0x01A7 // Aggregation Length Limit for High-MCS +#define AGGLEN_LMT_L 0x01A8 // Aggregation Length Limit for Low-MCS. +#define DARFRC 0x01B0 // Data Auto Rate Fallback Retry Count. +#define RARFRC 0x01B8 // Response Auto Rate Fallback Count. +#define MCS_TXAGC 0x01C0 +#define CCK_TXAGC 0x01C8 + +// +// 7. EDCA Setting Registers (Offset: 0x01D0 - 0x01FF) +// +#define EDCAPARA_VO 0x01D0 // EDCA Parameter Register for VO queue. +#define EDCAPARA_VI 0x01D4 // EDCA Parameter Register for VI queue. +#define EDCAPARA_BE 0x01D8 // EDCA Parameter Register for BE queue. +#define EDCAPARA_BK 0x01DC // EDCA Parameter Register for BK queue. +#define BCNTCFG 0x01E0 // Beacon Time Configuration Register. +#define CWRR 0x01E2 // Contention Window Report Register. +#define ACMAVG 0x01E4 // ACM Average Register. +#define AcmHwCtrl 0x01E7 +#define VO_ADMTM 0x01E8 // Admission Time Register. +#define VI_ADMTM 0x01EC +#define BE_ADMTM 0x01F0 +#define RETRY_LIMIT 0x01F4 // Retry Limit Registers[15:8]-short, [7:0]-long +#define SG_RATE 0x01F6 // Max MCS Rate Available Register, which we Set the hightst SG rate. + +// +// 8. WMAC, BA and CCX related Register. (Offset: 0x0200 - 0x023F) +// +#define NAV_CTRL 0x0200 +#define BW_OPMODE 0x0203 +#define BACAMCMD 0x0204 +#define BACAMCONTENT 0x0208 // Block ACK CAM R/W Register. + +// Roger had defined the 0x2xx register WMAC definition +#define LBDLY 0x0210 // Loopback Delay Register. +#define FWDLY 0x0211 // FW Delay Register. +#define HWPC_RX_CTRL 0x0218 // HW Packet Conversion RX Control Reg +#define MQIR 0x0220 // Mesh Qos Type Indication Register. +#define MAIR 0x0222 // Mesh ACK. +#define MSIR 0x0224 // Mesh HW Security Requirement Indication Reg +#define CLM_RESULT 0x0227 // CCA Busy Fraction(Channel Load) +#define NHM_RPI_CNT 0x0228 // Noise Histogram Measurement (NHM) RPI Report. +#define RXERR_RPT 0x0230 // Rx Error Report. +#define NAV_PROT_LEN 0x0234 // NAV Protection Length. +#define CFEND_TH 0x0236 // CF-End Threshold. +#define AMPDU_MIN_SPACE 0x0237 // AMPDU Min Space. +#define TXOP_STALL_CTRL 0x0238 + +// +// 9. Security Control Registers (Offset: 0x0240 - 0x025F) +// +#define RWCAM 0x0240 //IN 8190 Data Sheet is called CAMcmd +#define WCAMI 0x0244 // Software write CAM input content +#define RCAMO 0x0248 // Software read/write CAM config +#define CAMDBG 0x024C +#define SECR 0x0250 //Security Configuration Register + +// +// 10. Power Save Control Registers (Offset: 0x0260 - 0x02DF) +// +#define WOW_CTRL 0x0260 //Wake On WLAN Control. +#define PSSTATUS 0x0261 // Power Save Status. +#define PSSWITCH 0x0262 // Power Save Switch. +#define MIMOPS_WAIT_PERIOD 0x0263 +#define LPNAV_CTRL 0x0264 +#define WFM0 0x0270 // Wakeup Frame Mask. +#define WFM1 0x0280 // +#define WFM2 0x0290 // +#define WFM3 0x02A0 // +#define WFM4 0x02B0 // +#define WFM5 0x02C0 // FW Control register. +#define WFCRC 0x02D0 // Wakeup Frame CRC. +#define RPWM 0x02DC // Host Request Power Mode. +#define CPWM 0x02DD // Current Power Mode. +#define FW_RPT_REG 0x02c4 + +// +// 11. General Purpose Registers (Offset: 0x02E0 - 0x02FF) +// +#define PSTIME 0x02E0 // Power Save Timer Register +#define TIMER0 0x02E4 // +#define TIMER1 0x02E8 // +#define GPIO_CTRL 0x02EC // GPIO Control Register +#define GPIO_IN 0x02EC // GPIO pins input value +#define GPIO_OUT 0x02ED // GPIO pins output value +#define GPIO_IO_SEL 0x02EE // GPIO pins output enable when a bit is set to "1"; otherwise, input is configured. +#define GPIO_MOD 0x02EF // +#define GPIO_INTCTRL 0x02F0 // GPIO Interrupt Control Register[7:0] +#define MAC_PINMUX_CFG 0x02F1 // MAC PINMUX Configuration Reg[7:0] +#define LEDCFG 0x02F2 // System PINMUX Configuration Reg[7:0] +#define PHY_REG 0x02F3 // RPT: PHY REG Access Report Reg[7:0] +#define PHY_REG_DATA 0x02F4 // PHY REG Read DATA Register [31:0] +#define EFUSE_CLK 0x02F8 // CTRL: E-FUSE Clock Control Reg[7:0] +//#define GPIO_INTCTRL 0x02F9 // GPIO Interrupt Control Register[7:0] + +// +// 12. Host Interrupt Status Registers (Offset: 0x0300 - 0x030F) +// +#define IMR 0x0300 // Interrupt Mask Register +#define ISR 0x0308 // Interrupt Status Register + +// +// 13. Test Mode and Debug Control Registers (Offset: 0x0310 - 0x034F) +// +#define DBG_PORT_SWITCH 0x003A +#define BIST 0x0310 // Bist reg definition +#define DBS 0x0314 // Debug Select ??? +#define CPUINST 0x0318 // CPU Instruction Read Register +#define CPUCAUSE 0x031C // CPU Cause Register +#define LBUS_ERR_ADDR 0x0320 // Lexra Bus Error Address Register +#define LBUS_ERR_CMD 0x0324 // Lexra Bus Error Command Register +#define LBUS_ERR_DATA_L 0x0328 // Lexra Bus Error Data Low DW Register +#define LBUS_ERR_DATA_H 0x032C // +#define LX_EXCEPTION_ADDR 0x0330 // Lexra Bus Exception Address Register +#define WDG_CTRL 0x0334 // Watch Dog Control Register +#define INTMTU 0x0338 // Interrupt Mitigation Time Unit Reg +#define INTM 0x033A // Interrupt Mitigation Register +#define FDLOCKTURN0 0x033C // FW/DRV Lock Turn 0 Register +#define FDLOCKTURN1 0x033D // FW/DRV Lock Turn 1 Register +#define TRXPKTBUF_DBG_DATA 0x0340 // TRX Packet Buffer Debug Data Register +#define TRXPKTBUF_DBG_CTRL 0x0348 // TRX Packet Buffer Debug Control Reg +#define DPLL 0x034A // DPLL Monitor Register [15:0] +#define CBUS_ERR_ADDR 0x0350 // CPU Bus Error Address Register +#define CBUS_ERR_CMD 0x0354 // CPU Bus Error Command Register +#define CBUS_ERR_DATA_L 0x0358 // CPU Bus Error Data Low DW Register +#define CBUS_ERR_DATA_H 0x035C // +#define USB_SIE_INTF_ADDR 0x0360 // USB SIE Access Interface Address Reg +#define USB_SIE_INTF_WD 0x0361 // USB SIE Access Interface WData Reg +#define USB_SIE_INTF_RD 0x0362 // USB SIE Access Interface RData Reg +#define USB_SIE_INTF_CTRL 0x0363 // USB SIE Access Interface Control Reg + +// Boundary is 0x37F + +// +// 14. PCIE config register (Offset 0x500-) +// +#define TPPoll 0x0500 // Transmit Polling +#define PM_CTRL 0x0502 // PCIE power management control Register +#define PCIF 0x0503 // PCI Function Register 0x0009h~0x000bh + +#define THPDA 0x0514 // Transmit High Priority Desc Addr +#define TMDA 0x0518 // Transmit Management Desc Addr +#define TCDA 0x051C // Transmit Command Desc Addr +#define HDA 0x0520 // HCCA Desc Addr +#define TVODA 0x0524 // Transmit VO Desc Addr +#define TVIDA 0x0528 // Transmit VI Desc Addr +#define TBEDA 0x052C // Transmit BE Desc Addr +#define TBKDA 0x0530 // Transmit BK Desc Addr +#define TBDA 0x0534 // Transmit Beacon Desc Addr +#define RCDA 0x0538 // Receive Command Desc Addr +#define RDSA 0x053C // Receive Desc Starting Addr +#define DBI_WDATA 0x0540 // DBI write data Register +#define DBI_RDATA 0x0544 // DBI read data Register +#define DBI_CTRL 0x0548 // PCIE DBI control Register +#define MDIO_DATA 0x0550 // PCIE MDIO data Register +#define MDIO_CTRL 0x0554 // PCIE MDIO control Register +#define PCI_RPWM 0x0561 // PCIE RPWM register +#define PCI_CPWM 0x0563 // Current Power Mode. + +// +// Config register (Offset 0x800-) +// +#define PHY_CCA 0x803 // CCA related register + +//============================================================================ +// 8192S USB specific Regsiter Offset and Content definition, +// 2008.08.28, added by Roger. +//============================================================================ +// Rx Aggregation time-out reg. +#define USB_RX_AGG_TIMEOUT 0xFE5B + +// Firware reserved Tx page control. +#define FW_OFFLOAD_EN BIT7 + +// Min Spacing related settings. +#define MAX_MSS_DENSITY 0x13 +#define MAX_MSS_DENSITY_2T 0x13 +#define MAX_MSS_DENSITY_1T 0x0A + +// Rx DMA Control related settings +#define RXDMA_AGG_EN BIT7 + +// USB Rx Aggregation TimeOut settings +#define RXDMA_AGG_TIMEOUT_DISABLE 0x00 +#define RXDMA_AGG_TIMEOUT_17MS 0x01 +#define RXDMA_AGG_TIMEOUT_17_2_MS 0x02 +#define RXDMA_AGG_TIMEOUT_17_4_MS 0x04 +#define RXDMA_AGG_TIMEOUT_17_10_MS 0x0A +// USB RPWM register +#define USB_RPWM 0xFE58 + +//FIXLZM SVN_BRACH NOT MOD HERE, IF MOD RX IS LITTLE LOW +//#if ((HAL_CODE_BASE == RTL8192_S) && (DEV_BUS_TYPE==PCI_INTERFACE)) +//#define RPWM PCI_RPWM +//#elif ((HAL_CODE_BASE == RTL8192_S) && (DEV_BUS_TYPE==USB_INTERFACE)) +//#define RPWM USB_RPWM +//#endif + + +//============================================================================ +// 8190 Regsiter offset definition +//============================================================================ +#if 1 // Delete the register later +#define AFR 0x010 // AutoLoad Function Register +#define BCN_TCFG 0x062 // Beacon Time Configuration +#define RATR0 0x320 // Rate Adaptive Table register1 +#endif +// TODO: Remove unused register, We must declare backward compatiable +//Undefined register set in 8192S. 0x320/350 DW is useless +#define UnusedRegister 0x0320 +#define PSR UnusedRegister // Page Select Register +//Security Related +#define DCAM UnusedRegister // Debug CAM Interface +//PHY Configuration related +#define BBAddr UnusedRegister // Phy register address register +#define PhyDataR UnusedRegister // Phy register data read +#define UFWP UnusedRegister + + +//============================================================================ +// 8192S Regsiter Bit and Content definition +//============================================================================ + +// +// 1. System Configuration Registers (Offset: 0x0000 - 0x003F) +// +//---------------------------------------------------------------------------- +// 8192S SYS_ISO_CTRL bits (Offset 0x0, 16bit) +//---------------------------------------------------------------------------- +#define ISO_MD2PP BIT0 // MACTOP/BB/PCIe Digital to Power On. +#define ISO_PA2PCIE BIT3 // PCIe Analog 1.2V to PCIe 3.3V +#define ISO_PLL2MD BIT4 // AFE PLL to MACTOP/BB/PCIe Digital. +#define ISO_PWC_DV2RP BIT11 // Digital Vdd to Retention Path +#define ISO_PWC_RV2RP BIT12 // LPLDOR12 to Retenrion Path, 1: isolation, 0: attach. + +//---------------------------------------------------------------------------- +// 8192S SYS_FUNC_EN bits (Offset 0x2, 16bit) +//---------------------------------------------------------------------------- +#define FEN_MREGEN BIT15 // MAC I/O Registers Enable. +#define FEN_DCORE BIT11 // Enable Core Digital. +#define FEN_CPUEN BIT10 // Enable CPU Core Digital. +// 8192S PMC_FSM bits (Offset 0x4, 32bit) +//---------------------------------------------------------------------------- +#define PAD_HWPD_IDN BIT22 // HWPDN PAD status Indicator + +//---------------------------------------------------------------------------- + +//---------------------------------------------------------------------------- +// 8192S SYS_CLKR bits (Offset 0x8, 16bit) +//---------------------------------------------------------------------------- +#define SYS_CLKSEL_80M BIT0 // System Clock 80MHz +#define SYS_PS_CLKSEL BIT1 //System power save clock select. +#define SYS_CPU_CLKSEL BIT2 // System Clock select, 1: AFE source, 0: System clock(L-Bus) +#define SYS_MAC_CLK_EN BIT11 // MAC Clock Enable. +#define SYS_SWHW_SEL BIT14 // Load done, control path seitch. +#define SYS_FWHW_SEL BIT15 // Sleep exit, control path swith. + + +//---------------------------------------------------------------------------- +// 8192S Cmd9346CR bits (Offset 0xA, 16bit) +//---------------------------------------------------------------------------- +#define CmdEEPROM_En BIT5 // EEPROM enable when set 1 +#define CmdEERPOMSEL BIT4 // System EEPROM select, 0: boot from E-FUSE, 1: The EEPROM used is 9346 +#define Cmd9346CR_9356SEL BIT4 +#define AutoLoadEEPROM (CmdEEPROM_En|CmdEERPOMSEL) +#define AutoLoadEFUSE CmdEEPROM_En + + +//---------------------------------------------------------------------------- +// 8192S AFE_MISC bits AFE Misc (Offset 0x10, 8bits) +//---------------------------------------------------------------------------- +#define AFE_MBEN BIT1 // Enable AFE Macro Block's Mbias. +#define AFE_BGEN BIT0 // Enable AFE Macro Block's Bandgap. + +//---------------------------------------------------------------------------- +// 8192S SPS1_CTRL bits (Offset 0x18-1E, 56bits) +//---------------------------------------------------------------------------- +#define SPS1_SWEN BIT1 // Enable vsps18 SW Macro Block. +#define SPS1_LDEN BIT0 // Enable VSPS12 LDO Macro block. + +//---------------------------------------------------------------------------- +// 8192S RF_CTRL bits (Offset 0x1F, 8bits) +//---------------------------------------------------------------------------- +#define RF_EN BIT0 // Enable RF module. +#define RF_RSTB BIT1 // Reset RF module. +#define RF_SDMRSTB BIT2 // Reset RF SDM module. + +//---------------------------------------------------------------------------- +// 8192S LDOA15_CTRL bits (Offset 0x20, 8bits) +//---------------------------------------------------------------------------- +#define LDA15_EN BIT0 // Enable LDOA15 Macro Block + +//---------------------------------------------------------------------------- +// 8192S LDOV12D_CTRL bits (Offset 0x21, 8bits) +//---------------------------------------------------------------------------- +#define LDV12_EN BIT0 // Enable LDOVD12 Macro Block +#define LDV12_SDBY BIT1 // LDOVD12 standby mode + +//---------------------------------------------------------------------------- +// 8192S AFE_XTAL_CTRL bits AFE Crystal Control. (Offset 0x26,16bits) +//---------------------------------------------------------------------------- +#define XTAL_GATE_AFE BIT10 +// Gated Control. 1: AFE Clock source gated, 0: Clock enable. + +//---------------------------------------------------------------------------- +// 8192S AFE_PLL_CTRL bits System Function Enable (Offset 0x28,64bits) +//---------------------------------------------------------------------------- +#define APLL_EN BIT0 // Enable AFE PLL Macro Block. + +// Find which card bus type +#define AFR_CardBEn BIT0 +#define AFR_CLKRUN_SEL BIT1 +#define AFR_FuncRegEn BIT2 + +// +// 2. Command Control Registers (Offset: 0x0040 - 0x004F) +// +//---------------------------------------------------------------------------- +// 8192S (CMD) command register bits (Offset 0x40, 16 bits) +//---------------------------------------------------------------------------- +#define APSDOFF_STATUS BIT15 // +#define APSDOFF BIT14 // +#define BBRSTn BIT13 //Enable OFDM/CCK +#define BB_GLB_RSTn BIT12 //Enable BB +#define SCHEDULE_EN BIT10 //Enable MAC scheduler +#define MACRXEN BIT9 // +#define MACTXEN BIT8 // +#define DDMA_EN BIT7 //FW off load function enable +#define FW2HW_EN BIT6 //MAC every module reset as below +#define RXDMA_EN BIT5 // +#define TXDMA_EN BIT4 // +#define HCI_RXDMA_EN BIT3 // +#define HCI_TXDMA_EN BIT2 // + +//---------------------------------------------------------------------------- +// 8192S (TXPAUSE) transmission pause (Offset 0x42, 8 bits) +//---------------------------------------------------------------------------- +#define StopHCCA BIT6 +#define StopHigh BIT5 +#define StopMgt BIT4 +#define StopVO BIT3 +#define StopVI BIT2 +#define StopBE BIT1 +#define StopBK BIT0 + +//---------------------------------------------------------------------------- +// 8192S (LBKMD) LoopBack Mode Select (Offset 0x43, 8 bits) +//---------------------------------------------------------------------------- +// +// [3] no buffer, 1: no delay, 0: delay; [2] dmalbk, [1] no_txphy, [0] diglbk. +// 0000: Normal +// 1011: MAC loopback (involving CPU) +// 0011: MAC Delay Loopback +// 0001: PHY loopback (not yet implemented) +// 0111: DMA loopback (only uses TxPktBuffer and DMA engine) +// All other combinations are reserved. +// Default: 0000b. +// +#define LBK_NORMAL 0x00 +#define LBK_MAC_LB (BIT0|BIT1|BIT3) +#define LBK_MAC_DLB (BIT0|BIT1) +#define LBK_DMA_LB (BIT0|BIT1|BIT2) + +//---------------------------------------------------------------------------- +// 8192S (TCR) transmission Configuration Register (Offset 0x44, 32 bits) +//---------------------------------------------------------------------------- +#define TCP_OFDL_EN BIT25 //For CE packet conversion +#define HWPC_TX_EN BIT24 //"" +#define TXDMAPRE2FULL BIT23 //TXDMA enable pre2full sync +#define DISCW BIT20 //CW disable +#define TCRICV BIT19 //Append ICV or not +#define CfendForm BIT17 //AP mode +#define TCRCRC BIT16 //Append CRC32 +#define FAKE_IMEM_EN BIT15 // +#define TSFRST BIT9 // +#define TSFEN BIT8 // +// For TCR FW download ready --> write by FW Bit0-7 must all one +#define FWALLRDY (BIT0|BIT1|BIT2|BIT3|BIT4|BIT5|BIT6|BIT7) +#define FWRDY BIT7 +#define BASECHG BIT6 +#define IMEM BIT5 +#define DMEM_CODE_DONE BIT4 +#define EXT_IMEM_CHK_RPT BIT3 +#define EXT_IMEM_CODE_DONE BIT2 +#define IMEM_CHK_RPT BIT1 +#define IMEM_CODE_DONE BIT0 +// Copy fomr 92SU definition +#define IMEM_CODE_DONE BIT0 +#define IMEM_CHK_RPT BIT1 +#define EMEM_CODE_DONE BIT2 +#define EMEM_CHK_RPT BIT3 +#define DMEM_CODE_DONE BIT4 +#define IMEM_RDY BIT5 +#define BASECHG BIT6 +#define FWRDY BIT7 +#define LOAD_FW_READY (IMEM_CODE_DONE|IMEM_CHK_RPT|EMEM_CODE_DONE|\ + EMEM_CHK_RPT|DMEM_CODE_DONE|IMEM_RDY|BASECHG|\ + FWRDY) +#define TCR_TSFEN BIT8 // TSF function on or off. +#define TCR_TSFRST BIT9 // Reset TSF function to zero. +#define TCR_FAKE_IMEM_EN BIT15 +#define TCR_CRC BIT16 +#define TCR_ICV BIT19 // Integrity Check Value. +#define TCR_DISCW BIT20 // Disable Contention Windows Backoff. +#define TCR_HWPC_TX_EN BIT24 +#define TCR_TCP_OFDL_EN BIT25 +#define TXDMA_INIT_VALUE (IMEM_CHK_RPT|EXT_IMEM_CHK_RPT) +//---------------------------------------------------------------------------- +// 8192S (RCR) Receive Configuration Register (Offset 0x48, 32 bits) +//---------------------------------------------------------------------------- +#define RCR_APPFCS BIT31 //WMAC append FCS after pauload +#define RCR_DIS_ENC_2BYTE BIT30 //HW encrypt 2 or 1 byte mode +#define RCR_DIS_AES_2BYTE BIT29 // +#define RCR_HTC_LOC_CTRL BIT28 //MFC<--HTC=1 MFC-->HTC=0 +#define RCR_ENMBID BIT27 //Enable Multiple BssId. +#define RCR_RX_TCPOFDL_EN BIT26 // +#define RCR_APP_PHYST_RXFF BIT25 // +#define RCR_APP_PHYST_STAFF BIT24 // +#define RCR_CBSSID BIT23 //Accept BSSID match packet +#define RCR_APWRMGT BIT22 //Accept power management packet +#define RCR_ADD3 BIT21 //Accept address 3 match packet +#define RCR_AMF BIT20 //Accept management type frame +#define RCR_ACF BIT19 //Accept control type frame +#define RCR_ADF BIT18 //Accept data type frame +#define RCR_APP_MIC BIT17 // +#define RCR_APP_ICV BIT16 // +#define RCR_RXFTH BIT13 //Rx FIFO Threshold Bot 13 - 15 +#define RCR_AICV BIT12 //Accept ICV error packet +#define RCR_RXDESC_LK_EN BIT11 //Accept to update rx desc length +#define RCR_APP_BA_SSN BIT6 //Accept BA SSN +#define RCR_ACRC32 BIT5 //Accept CRC32 error packet +#define RCR_RXSHFT_EN BIT4 //Accept broadcast packet +#define RCR_AB BIT3 //Accept broadcast packet +#define RCR_AM BIT2 //Accept multicast packet +#define RCR_APM BIT1 //Accept physical match packet +#define RCR_AAP BIT0 //Accept all unicast packet +#define RCR_MXDMA_OFFSET 8 +#define RCR_FIFO_OFFSET 13 + +//in 92U FIXLZM +//#ifdef RTL8192U +#define RCR_ONLYERLPKT BIT31 // Early Receiving based on Packet Size. +#define RCR_ENCS2 BIT30 // Enable Carrier Sense Detection Method 2 +#define RCR_ENCS1 BIT29 // Enable Carrier Sense Detection Method 1 +#define RCR_ACKTXBW (BIT24|BIT25) // TXBW Setting of ACK frames +//#endif +//---------------------------------------------------------------------------- +// 8192S (MSR) Media Status Register (Offset 0x4C, 8 bits) +//---------------------------------------------------------------------------- +/* +Network Type +00: No link +01: Link in ad hoc network +10: Link in infrastructure network +11: AP mode +Default: 00b. +*/ +#define MSR_NOLINK 0x00 +#define MSR_ADHOC 0x01 +#define MSR_INFRA 0x02 +#define MSR_AP 0x03 + +//---------------------------------------------------------------------------- +// 8192S (SYSF_CFG) system Fucntion Config Reg (Offset 0x4D, 8 bits) +//---------------------------------------------------------------------------- +#define ENUART BIT7 +#define ENJTAG BIT3 +#define BTMODE (BIT2|BIT1) +#define ENBT BIT0 + +//---------------------------------------------------------------------------- +// 8192S (MBIDCTRL) MBSSID Control Register (Offset 0x4F, 8 bits) +//---------------------------------------------------------------------------- +#define ENMBID BIT7 +#define BCNUM (BIT6|BIT5|BIT4) + +// +// 3. MACID Setting Registers (Offset: 0x0050 - 0x007F) +// + +// +// 4. Timing Control Registers (Offset: 0x0080 - 0x009F) +// +//---------------------------------------------------------------------------- +// 8192S (USTIME) US Time Tunning Register (Offset 0x8A, 16 bits) +//---------------------------------------------------------------------------- +#define USTIME_EDCA 0xFF00 +#define USTIME_TSF 0x00FF + +//---------------------------------------------------------------------------- +// 8192S (SIFS_CCK/OFDM) US Time Tunning Register (Offset 0x8C/8E,16 bits) +//---------------------------------------------------------------------------- +#define SIFS_TRX 0xFF00 +#define SIFS_CTX 0x00FF + +//---------------------------------------------------------------------------- +// 8192S (DRVERLYINT) Driver Early Interrupt Reg (Offset 0x98, 16bit) +//---------------------------------------------------------------------------- +#define ENSWBCN BIT15 +#define DRVERLY_TU 0x0FF0 +#define DRVERLY_US 0x000F +#define BCN_TCFG_CW_SHIFT 8 +#define BCN_TCFG_IFS 0 + +// +// 5. FIFO Control Registers (Offset: 0x00A0 - 0x015F) +// + +// +// 6. Adaptive Control Registers (Offset: 0x0160 - 0x01CF) +// +//---------------------------------------------------------------------------- +// 8192S Response Rate Set Register (offset 0x181, 24bits) +//---------------------------------------------------------------------------- +#define RRSR_RSC_OFFSET 21 +#define RRSR_SHORT_OFFSET 23 +#define RRSR_RSC_BW_40M 0x600000 +#define RRSR_RSC_UPSUBCHNL 0x400000 +#define RRSR_RSC_LOWSUBCHNL 0x200000 +#define RRSR_SHORT 0x800000 +#define RRSR_1M BIT0 +#define RRSR_2M BIT1 +#define RRSR_5_5M BIT2 +#define RRSR_11M BIT3 +#define RRSR_6M BIT4 +#define RRSR_9M BIT5 +#define RRSR_12M BIT6 +#define RRSR_18M BIT7 +#define RRSR_24M BIT8 +#define RRSR_36M BIT9 +#define RRSR_48M BIT10 +#define RRSR_54M BIT11 +#define RRSR_MCS0 BIT12 +#define RRSR_MCS1 BIT13 +#define RRSR_MCS2 BIT14 +#define RRSR_MCS3 BIT15 +#define RRSR_MCS4 BIT16 +#define RRSR_MCS5 BIT17 +#define RRSR_MCS6 BIT18 +#define RRSR_MCS7 BIT19 +#define BRSR_AckShortPmb BIT23 + +#define RRSR_RSC_UPSUBCHANL 0x200000 +// CCK ACK: use Short Preamble or not + +//---------------------------------------------------------------------------- +// 8192S Rate Definition +//---------------------------------------------------------------------------- +//CCK +#define RATR_1M 0x00000001 +#define RATR_2M 0x00000002 +#define RATR_55M 0x00000004 +#define RATR_11M 0x00000008 +//OFDM +#define RATR_6M 0x00000010 +#define RATR_9M 0x00000020 +#define RATR_12M 0x00000040 +#define RATR_18M 0x00000080 +#define RATR_24M 0x00000100 +#define RATR_36M 0x00000200 +#define RATR_48M 0x00000400 +#define RATR_54M 0x00000800 +//MCS 1 Spatial Stream +#define RATR_MCS0 0x00001000 +#define RATR_MCS1 0x00002000 +#define RATR_MCS2 0x00004000 +#define RATR_MCS3 0x00008000 +#define RATR_MCS4 0x00010000 +#define RATR_MCS5 0x00020000 +#define RATR_MCS6 0x00040000 +#define RATR_MCS7 0x00080000 +//MCS 2 Spatial Stream +#define RATR_MCS8 0x00100000 +#define RATR_MCS9 0x00200000 +#define RATR_MCS10 0x00400000 +#define RATR_MCS11 0x00800000 +#define RATR_MCS12 0x01000000 +#define RATR_MCS13 0x02000000 +#define RATR_MCS14 0x04000000 +#define RATR_MCS15 0x08000000 +// ALL CCK Rate +#define RATE_ALL_CCK RATR_1M|RATR_2M|RATR_55M|RATR_11M +#define RATE_ALL_OFDM_AG RATR_6M|RATR_9M|RATR_12M|RATR_18M|RATR_24M|\ + RATR_36M|RATR_48M|RATR_54M +#define RATE_ALL_OFDM_1SS RATR_MCS0|RATR_MCS1|RATR_MCS2|RATR_MCS3 |\ + RATR_MCS4|RATR_MCS5|RATR_MCS6 |RATR_MCS7 +#define RATE_ALL_OFDM_2SS RATR_MCS8|RATR_MCS9 |RATR_MCS10|RATR_MCS11|\ + RATR_MCS12|RATR_MCS13|RATR_MCS14|RATR_MCS15 + +// +// 7. EDCA Setting Registers (Offset: 0x01D0 - 0x01FF) +// +//---------------------------------------------------------------------------- +// 8192S EDCA Setting (offset 0x1D0-1DF, 4DW VO/VI/BE/BK) +//---------------------------------------------------------------------------- +#define AC_PARAM_TXOP_LIMIT_OFFSET 16 +#define AC_PARAM_ECW_MAX_OFFSET 12 +#define AC_PARAM_ECW_MIN_OFFSET 8 +#define AC_PARAM_AIFS_OFFSET 0 + +//---------------------------------------------------------------------------- +// 8192S AcmHwCtrl bits (offset 0x1E7, 1 byte) +//---------------------------------------------------------------------------- +#define AcmHw_HwEn BIT0 +#define AcmHw_BeqEn BIT1 +#define AcmHw_ViqEn BIT2 +#define AcmHw_VoqEn BIT3 +#define AcmHw_BeqStatus BIT4 +#define AcmHw_ViqStatus BIT5 +#define AcmHw_VoqStatus BIT6 + +//---------------------------------------------------------------------------- +// 8192S Retry Limit (Offset 0x1F4, 16bit) +//---------------------------------------------------------------------------- +#define RETRY_LIMIT_SHORT_SHIFT 8 +#define RETRY_LIMIT_LONG_SHIFT 0 + +// +// 8. WMAC, BA and CCX related Register. (Offset: 0x0200 - 0x023F) +// +//---------------------------------------------------------------------------- +// 8192S NAV_CTRL bits (Offset 0x200, 24bit) +//---------------------------------------------------------------------------- +#define NAV_UPPER_EN BIT16 +#define NAV_UPPER 0xFF00 +#define NAV_RTSRST 0xFF +//---------------------------------------------------------------------------- +// 8192S BW_OPMODE bits (Offset 0x203, 8bit) +//---------------------------------------------------------------------------- +#define BW_OPMODE_20MHZ BIT2 +#define BW_OPMODE_5G BIT1 +#define BW_OPMODE_11J BIT0 +//---------------------------------------------------------------------------- +// 8192S BW_OPMODE bits (Offset 0x230, 4 Byte) +//---------------------------------------------------------------------------- +#define RXERR_RPT_RST BIT27 // Write "one" to set the counter to zero. +// RXERR_RPT_SEL +#define RXERR_OFDM_PPDU 0 +#define RXERR_OFDM_FALSE_ALARM 1 +#define RXERR_OFDM_MPDU_OK 2 +#define RXERR_OFDM_MPDU_FAIL 3 +#define RXERR_CCK_PPDU 4 +#define RXERR_CCK_FALSE_ALARM 5 +#define RXERR_CCK_MPDU_OK 6 +#define RXERR_CCK_MPDU_FAIL 7 +#define RXERR_HT_PPDU 8 +#define RXERR_HT_FALSE_ALARM 9 +#define RXERR_HT_MPDU_TOTAL 10 +#define RXERR_HT_MPDU_OK 11 +#define RXERR_HT_MPDU_FAIL 12 +#define RXERR_RX_FULL_DROP 15 + +// +// 9. Security Control Registers (Offset: 0x0240 - 0x025F) +// +//---------------------------------------------------------------------------- +// 8192S RWCAM CAM Command Register (offset 0x240, 4 byte) +//---------------------------------------------------------------------------- +#define CAM_CM_SecCAMPolling BIT31 //Security CAM Polling +#define CAM_CM_SecCAMClr BIT30 //Clear all bits in CAM +#define CAM_CM_SecCAMWE BIT16 //Security CAM enable +#define CAM_ADDR 0xFF //CAM Address Offset + +//---------------------------------------------------------------------------- +// 8192S CAMDBG Debug CAM Register (offset 0x24C, 4 byte) +//---------------------------------------------------------------------------- +#define Dbg_CAM_TXSecCAMInfo BIT31 //Retrieve lastest Tx Info +#define Dbg_CAM_SecKeyFound BIT30 //Security KEY Found + + +//---------------------------------------------------------------------------- +// 8192S SECR Security Configuration Register (offset 0x250, 1 byte) +//---------------------------------------------------------------------------- +#define SCR_TxUseDK BIT0 //Force Tx Use Default Key +#define SCR_RxUseDK BIT1 //Force Rx Use Default Key +#define SCR_TxEncEnable BIT2 //Enable Tx Encryption +#define SCR_RxDecEnable BIT3 //Enable Rx Decryption +#define SCR_SKByA2 BIT4 //Search kEY BY A2 +#define SCR_NoSKMC BIT5 //No Key Search Multicast +//---------------------------------------------------------------------------- +// 8192S CAM Config Setting (offset 0x250, 1 byte) +//---------------------------------------------------------------------------- +#define CAM_VALID BIT15 +#define CAM_NOTVALID 0x0000 +#define CAM_USEDK BIT5 + +#define CAM_NONE 0x0 +#define CAM_WEP40 0x01 +#define CAM_TKIP 0x02 +#define CAM_AES 0x04 +#define CAM_WEP104 0x05 + +#define TOTAL_CAM_ENTRY 32 + +#define CAM_CONFIG_USEDK TRUE +#define CAM_CONFIG_NO_USEDK FALSE + +#define CAM_WRITE BIT16 +#define CAM_READ 0x00000000 +#define CAM_POLLINIG BIT31 + +#define SCR_UseDK 0x01 +#define SCR_TxSecEnable 0x02 +#define SCR_RxSecEnable 0x04 + +// +// 10. Power Save Control Registers (Offset: 0x0260 - 0x02DF) +// +#define WOW_PMEN BIT0 // Power management Enable. +#define WOW_WOMEN BIT1 // WoW function on or off. +#define WOW_MAGIC BIT2 // Magic packet +#define WOW_UWF BIT3 // Unicast Wakeup frame. + +// +// 11. General Purpose Registers (Offset: 0x02E0 - 0x02FF) +// 8192S GPIO Config Setting (offset 0x2F1, 1 byte) +//---------------------------------------------------------------------------- +#define GPIOMUX_EN BIT3 // When this bit is set to "1", GPIO PINs will switch to MAC GPIO Function +#define GPIOSEL_GPIO 0 // UART or JTAG or pure GPIO +#define GPIOSEL_PHYDBG 1 // PHYDBG +#define GPIOSEL_BT 2 // BT_coex +#define GPIOSEL_WLANDBG 3 // WLANDBG +#define GPIOSEL_GPIO_MASK ~(BIT0|BIT1) + +//---------------------------------------------------------------------------- + +//---------------------------------------------------------------------------- +// PHY REG Access Report Register definition +//---------------------------------------------------------------------------- +#define HST_RDBUSY BIT0 +#define CPU_WTBUSY BIT1 + +// +// 12. Host Interrupt Status Registers (Offset: 0x0300 - 0x030F) +// +//---------------------------------------------------------------------------- +// 8190 IMR/ISR bits (offset 0xfd, 8bits) +//---------------------------------------------------------------------------- +#define IMR8190_DISABLED 0x0 + +// IMR DW1 Bit 0-31 +#define IMR_CPUERR BIT5 // CPU error interrupt +#define IMR_ATIMEND BIT4 // ATIM Window End Interrupt +#define IMR_TBDOK BIT3 // Transmit Beacon OK Interrupt +#define IMR_TBDER BIT2 // Transmit Beacon Error Interrupt +#define IMR_BCNDMAINT8 BIT1 // Beacon DMA Interrupt 8 +#define IMR_BCNDMAINT7 BIT0 // Beacon DMA Interrupt 7 +// IMR DW0 Bit 0-31 + +#define IMR_BCNDMAINT6 BIT31 // Beacon DMA Interrupt 6 +#define IMR_BCNDMAINT5 BIT30 // Beacon DMA Interrupt 5 +#define IMR_BCNDMAINT4 BIT29 // Beacon DMA Interrupt 4 +#define IMR_BCNDMAINT3 BIT28 // Beacon DMA Interrupt 3 +#define IMR_BCNDMAINT2 BIT27 // Beacon DMA Interrupt 2 +#define IMR_BCNDMAINT1 BIT26 // Beacon DMA Interrupt 1 +#define IMR_BCNDOK8 BIT25 // Beacon Queue DMA OK Interrup 8 +#define IMR_BCNDOK7 BIT24 // Beacon Queue DMA OK Interrup 7 +#define IMR_BCNDOK6 BIT23 // Beacon Queue DMA OK Interrup 6 +#define IMR_BCNDOK5 BIT22 // Beacon Queue DMA OK Interrup 5 +#define IMR_BCNDOK4 BIT21 // Beacon Queue DMA OK Interrup 4 +#define IMR_BCNDOK3 BIT20 // Beacon Queue DMA OK Interrup 3 +#define IMR_BCNDOK2 BIT19 // Beacon Queue DMA OK Interrup 2 +#define IMR_BCNDOK1 BIT18 // Beacon Queue DMA OK Interrup 1 +#define IMR_TIMEOUT2 BIT17 // Timeout interrupt 2 +#define IMR_TIMEOUT1 BIT16 // Timeout interrupt 1 +#define IMR_TXFOVW BIT15 // Transmit FIFO Overflow +#define IMR_PSTIMEOUT BIT14 // Power save time out interrupt +#define IMR_BcnInt BIT13 // Beacon DMA Interrupt 0 +#define IMR_RXFOVW BIT12 // Receive FIFO Overflow +#define IMR_RDU BIT11 // Receive Descriptor Unavailable +#define IMR_RXCMDOK BIT10 // Receive Command Packet OK +#define IMR_BDOK BIT9 // Beacon Queue DMA OK Interrup +#define IMR_HIGHDOK BIT8 // High Queue DMA OK Interrupt +#define IMR_COMDOK BIT7 // Command Queue DMA OK Interrupt +#define IMR_MGNTDOK BIT6 // Management Queue DMA OK Interrupt +#define IMR_HCCADOK BIT5 // HCCA Queue DMA OK Interrupt +#define IMR_BKDOK BIT4 // AC_BK DMA OK Interrupt +#define IMR_BEDOK BIT3 // AC_BE DMA OK Interrupt +#define IMR_VIDOK BIT2 // AC_VI DMA OK Interrupt +#define IMR_VODOK BIT1 // AC_VO DMA Interrupt +#define IMR_ROK BIT0 // Receive DMA OK Interrupt + +// +// 13. Test Mode and Debug Control Registers (Offset: 0x0310 - 0x034F) +// + +// +// 14. PCIE config register (Offset 0x500-) +// +//---------------------------------------------------------------------------- +// 8190 TPPool bits (offset 0xd9, 2 byte) +//---------------------------------------------------------------------------- +#define TPPoll_BKQ BIT0 // BK queue polling +#define TPPoll_BEQ BIT1 // BE queue polling +#define TPPoll_VIQ BIT2 // VI queue polling +#define TPPoll_VOQ BIT3 // VO queue polling +#define TPPoll_BQ BIT4 // Beacon queue polling +#define TPPoll_CQ BIT5 // Command queue polling +#define TPPoll_MQ BIT6 // Management queue polling +#define TPPoll_HQ BIT7 // High queue polling +#define TPPoll_HCCAQ BIT8 // HCCA queue polling +#define TPPoll_StopBK BIT9 // Stop BK queue +#define TPPoll_StopBE BIT10 // Stop BE queue +#define TPPoll_StopVI BIT11 // Stop VI queue +#define TPPoll_StopVO BIT12 // Stop VO queue +#define TPPoll_StopMgt BIT13 // Stop Mgnt queue +#define TPPoll_StopHigh BIT14 // Stop High queue +#define TPPoll_StopHCCA BIT15 // Stop HCCA queue +#define TPPoll_SHIFT 8 // Queue ID mapping + +//---------------------------------------------------------------------------- +// 8192S PCIF (Offset 0x500, 32bit) +//---------------------------------------------------------------------------- +#define MXDMA2_16bytes 0x000 +#define MXDMA2_32bytes 0x001 +#define MXDMA2_64bytes 0x010 +#define MXDMA2_128bytes 0x011 +#define MXDMA2_256bytes 0x100 +#define MXDMA2_512bytes 0x101 +#define MXDMA2_1024bytes 0x110 +#define MXDMA2_NoLimit 0x7 + +#define MULRW_SHIFT 3 +#define MXDMA2_RX_SHIFT 4 +#define MXDMA2_TX_SHIFT 0 + +//---------------------------------------------------------------------------- +// 8190 CCX_COMMAND_REG Setting (offset 0x25A, 1 byte) +//---------------------------------------------------------------------------- +#define CCX_CMD_CLM_ENABLE BIT0 // Enable Channel Load +#define CCX_CMD_NHM_ENABLE BIT1 // Enable Noise Histogram +#define CCX_CMD_FUNCTION_ENABLE BIT8 +// CCX function (Channel Load/RPI/Noise Histogram). +#define CCX_CMD_IGNORE_CCA BIT9 +// Treat CCA period as IDLE time for NHM. +#define CCX_CMD_IGNORE_TXON BIT10 +// Treat TXON period as IDLE time for NHM. +#define CCX_CLM_RESULT_READY BIT16 +// 1: Indicate the result of Channel Load is ready. +#define CCX_NHM_RESULT_READY BIT16 +// 1: Indicate the result of Noise histogram is ready. +#define CCX_CMD_RESET 0x0 +// Clear all the result of CCX measurement and disable the CCX function. + + +//---------------------------------------------------------------------------- +// 8192S EFUSE +//---------------------------------------------------------------------------- +//#define HWSET_MAX_SIZE_92S 128 + + +//---------------------------------------------------------------------------- +// 8192S EEPROM/EFUSE share register definition. +//---------------------------------------------------------------------------- + +#ifdef RTL8192SE +// +// 2008/11/05 MH Redefine EEPROM address for 8192SE +// 92SE/SU EEPROM definition seems not the same!!!!!! +// EEPROM MAP REgister Definition!!!! Please refer to 8192SE EEPROM V0.5 2008/10/21 +// Update to 8192SE EEPROM V0.6 2008/11/11 +// +#define RTL8190_EEPROM_ID 0x8129 // 0-1 +#define EEPROM_HPON 0x02 // LDO settings.2-5 +#define EEPROM_CLK 0x06 // Clock settings.6-7 +#define EEPROM_TESTR 0x08 // SE Test mode.8 + +#define EEPROM_VID 0x0A // SE Vendor ID.A-B +#define EEPROM_DID 0x0C // SE Device ID. C-D +#define EEPROM_SVID 0x0E // SE Vendor ID.E-F +#define EEPROM_SMID 0x10 // SE PCI Subsystem ID. 10-11 + +#define EEPROM_MAC_ADDR 0x12 // SEMAC Address. 12-17 +#define EEPROM_NODE_ADDRESS_BYTE_0 0x12 // MAC address. + +#define EEPROM_PwDiff 0x54 // Difference of gain index between legacy and high throughput OFDM. + +// +// 0x20 - 4B EPHY parameter!!! +// +// +#define EEPROM_TxPowerBase 0x50 // Tx Power of serving station. +#define EEPROM_TxPwIndex_CCK_24G 0x5D // 0x50~0x5D Range = 0~0x24//FIXLZM +#define EEPROM_TxPwIndex_OFDM_24G 0x6B // 0x5E~0x6B Range = 0~0x24//FIXLZM +#define EEPROM_TX_PWR_INDEX_RANGE 28 // CCK and OFDM 14 channel + + +// 2009/01/21 MH Add for SD3 requirement +#define EEPROM_TX_PWR_HT20_DIFF 0x62// HT20 Tx Power Index Difference +#define DEFAULT_HT20_TXPWR_DIFF 2 // HT20<->40 default Tx Power Index Difference +#define EEPROM_TX_PWR_OFDM_DIFF 0x65// OFDM Tx Power Index Difference +#define EEPROM_TX_PWR_BAND_EDGE 0x67// TX Power offset at band-edge channel +#define TX_PWR_BAND_EDGE_CHK 0x6D// Check if band-edge scheme is enabled + +// Oly old EEPROM format support the definition============================= +// +#define EEPROM_TxPwIndex_CCK_24G 0x5D // 0x50~0x5D Range = 0~0x24 +#define EEPROM_TxPwIndex_OFDM_24G 0x6B // 0x5E~0x6B Range = 0~0x24 +#define EEPROM_HT2T_CH1_A 0x6c //HT 2T path A channel 1 Power Index. +#define EEPROM_HT2T_CH7_A 0x6d //HT 2T path A channel 7 Power Index. +#define EEPROM_HT2T_CH13_A 0x6e //HT 2T path A channel 13 Power Index. +#define EEPROM_HT2T_CH1_B 0x6f //HT 2T path B channel 1 Power Index. +#define EEPROM_HT2T_CH7_B 0x70 //HT 2T path B channel 7 Power Index. +#define EEPROM_HT2T_CH13_B 0x71 //HT 2T path B channel 13 Power Index. +// +#define EEPROM_TSSI_A 0x74 //TSSI value of path A. +#define EEPROM_TSSI_B 0x75 //TSSI value of path B. +// +#define EEPROM_RFInd_PowerDiff 0x76 +#define EEPROM_Default_LegacyHTTxPowerDiff 0x3 +// +#define EEPROM_ThermalMeter 0x77 // Thermal meter default value. +#define EEPROM_CrystalCap 0x79 // Crystal Cap. +#define EEPROM_ChannelPlan 0x7B // Map of supported channels. +#define EEPROM_Version 0x7C // The EEPROM content version +#define EEPROM_CustomID 0x7A +#define EEPROM_BoardType 0x7E +// 0: 2x2 Green RTL8192GE miniCard (QFN68) +// 1: 1x2 RTL8191SE miniCard (QFN64) +// 2: 2x2 RTL8192SE miniCard (QFN68) +// 3: 1x2 RTL8191SR minicCard(QFN64) + +// +// Default Value for EEPROM or EFUSE!!! +// +#define EEPROM_Default_TSSI 0x0 +#define EEPROM_Default_TxPowerDiff 0x0 +#define EEPROM_Default_CrystalCap 0x5 +#define EEPROM_Default_BoardType 0x02 // Default: 2X2, RTL8192SE(QFPN68) +#define EEPROM_Default_TxPower 0x1010 +#define EEPROM_Default_HT2T_TxPwr 0x10 + +#ifdef EEPROM_OLD_FORMAT_SUPPORT +#define EEPROM_Default_TxPowerBase 0x0 +#define EEPROM_Default_ThermalMeter 0x12 +#define EEPROM_Default_PwDiff 0x4 +#else +#define EEPROM_Default_LegacyHTTxPowerDiff 0x3 +#define EEPROM_Default_ThermalMeter 0x12 +#define EEPROM_Default_AntTxPowerDiff 0x0 +#define EEPROM_Default_TxPwDiff_CrystalCap 0x5 +#define EEPROM_Default_TxPowerLevel 0x22 +#endif + +#define EEPROM_CHANNEL_PLAN_FCC 0x0 +#define EEPROM_CHANNEL_PLAN_IC 0x1 +#define EEPROM_CHANNEL_PLAN_ETSI 0x2 +#define EEPROM_CHANNEL_PLAN_SPAIN 0x3 +#define EEPROM_CHANNEL_PLAN_FRANCE 0x4 +#define EEPROM_CHANNEL_PLAN_MKK 0x5 +#define EEPROM_CHANNEL_PLAN_MKK1 0x6 +#define EEPROM_CHANNEL_PLAN_ISRAEL 0x7 +#define EEPROM_CHANNEL_PLAN_TELEC 0x8 +#define EEPROM_CHANNEL_PLAN_GLOBAL_DOMAIN 0x9 +#define EEPROM_CHANNEL_PLAN_WORLD_WIDE_13 0xA +#define EEPROM_CHANNEL_PLAN_BY_HW_MASK 0x80 + + +#define EEPROM_CID_DEFAULT 0x0 +#define EEPROM_CID_TOSHIBA 0x4 +#else +//---------------------------------------------------------------------------- +// 8192S EEROM and Compatible E-Fuse definition. Added by Roger, 2008.10.21. +//---------------------------------------------------------------------------- +#define RTL8190_EEPROM_ID 0x8129 +#define EEPROM_HPON 0x02 // LDO settings. +#define EEPROM_VID 0x08 // USB Vendor ID. +#define EEPROM_PID 0x0A // USB Product ID. +#define EEPROM_USB_OPTIONAL 0x0C // For optional function. +#define EEPROM_USB_PHY_PARA1 0x0D // For fine tune USB PHY. +#define EEPROM_NODE_ADDRESS_BYTE_0 0x12 // MAC address. +#define EEPROM_TxPowerDiff 0x1F + +#define EEPROM_Version 0x50 +#define EEPROM_ChannelPlan 0x51 // Map of supported channels. +#define EEPROM_CustomID 0x52 +#define EEPROM_SubCustomID 0x53 // Reserved for customer use. + + + // The followin are for different version of EEPROM contents purpose. 2008.11.22. +#ifdef EEPROM_OLD_FORMAT_SUPPORT +#define EEPROM_PwDiff 0x54 // Difference of gain index between legacy and high throughput OFDM. +#define EEPROM_ThermalMeter 0x55 // Thermal meter default value. +#define EEPROM_Reserved 0x56 // Reserved. +#define EEPROM_CrystalCap 0x57 // Crystal Cap. +#define EEPROM_TxPowerBase 0x58 // Tx Power of serving station. +#define EEPROM_TxPwIndex_CCK_24G 0x59 // 0x59~0x66 +#define EEPROM_TxPwIndex_OFDM_24G 0x67 // 0x67~0x74 +#define EEPROM_TSSI_A 0x75 //TSSI value of path A. +#define EEPROM_TSSI_B 0x76 //TSSI value of path B. +#define EEPROM_TxPwTkMode 0x77 //Tx Power tracking mode. +#define EEPROM_HT2T_CH1_A 0x78 //HT 2T path A channel 1 Power Index. +#define EEPROM_HT2T_CH7_A 0x79 //HT 2T path A channel 7 Power Index. +#define EEPROM_HT2T_CH13_A 0x7a //HT 2T path A channel 13 Power Index. +#define EEPROM_HT2T_CH1_B 0x7b //HT 2T path B channel 1 Power Index. +#define EEPROM_HT2T_CH7_B 0x7c //HT 2T path B channel 7 Power Index. +#define EEPROM_HT2T_CH13_B 0x7d //HT 2T path B channel 13 Power Index. +#define EEPROM_BoardType 0x7e //0x0: RTL8188SU, 0x1: RTL8191SU, 0x2: RTL8192SU, 0x3: RTL8191GU +#else +#define EEPROM_BoardType 0x54 //0x0: RTL8188SU, 0x1: RTL8191SU, 0x2: RTL8192SU, 0x3: RTL8191GU +#define EEPROM_TxPwIndex 0x55 //0x55-0x66, Tx Power index. +#define EEPROM_PwDiff 0x67 // Difference of gain index between legacy and high throughput OFDM. +#define EEPROM_ThermalMeter 0x68 // Thermal meter default value. +#define EEPROM_CrystalCap 0x69 // Crystal Cap. +#define EEPROM_TxPowerBase 0x6a // Tx Power of serving station. +#define EEPROM_TSSI_A 0x6b //TSSI value of path A. +#define EEPROM_TSSI_B 0x6c //TSSI value of path B. +#define EEPROM_TxPwTkMode 0x6d //Tx Power tracking mode. +//#define EEPROM_Reserved 0x6e //0x6e-0x7f, reserved. + +// 2009/02/09 Cosa Add for SD3 requirement +#define EEPROM_TX_PWR_HT20_DIFF 0x6e// HT20 Tx Power Index Difference +#define DEFAULT_HT20_TXPWR_DIFF 2 // HT20<->40 default Tx Power Index Difference +#define EEPROM_TX_PWR_OFDM_DIFF 0x71// OFDM Tx Power Index Difference +#define EEPROM_TX_PWR_BAND_EDGE 0x73// TX Power offset at band-edge channel +#define TX_PWR_BAND_EDGE_CHK 0x79// Check if band-edge scheme is enabled +#endif +#define EEPROM_Default_LegacyHTTxPowerDiff 0x3 +#define EEPROM_USB_Default_OPTIONAL_FUNC 0x8 +#define EEPROM_USB_Default_PHY_PARAM 0x0 +#define EEPROM_Default_TSSI 0x0 +#define EEPROM_Default_TxPwrTkMode 0x0 +#define EEPROM_Default_TxPowerDiff 0x0 +#define EEPROM_Default_TxPowerBase 0x0 +#define EEPROM_Default_ThermalMeter 0x7 +#define EEPROM_Default_PwDiff 0x4 +#define EEPROM_Default_CrystalCap 0x5 +#define EEPROM_Default_TxPower 0x1010 +#define EEPROM_Default_BoardType 0x02 // Default: 2X2, RTL8192SU(QFPN68) +#define EEPROM_Default_HT2T_TxPwr 0x10 +#define EEPROM_USB_SN BIT0 +#define EEPROM_USB_REMOTE_WAKEUP BIT1 +#define EEPROM_USB_DEVICE_PWR BIT2 +#define EEPROM_EP_NUMBER (BIT3|BIT4) + +#define EEPROM_CHANNEL_PLAN_FCC 0x0 +#define EEPROM_CHANNEL_PLAN_IC 0x1 +#define EEPROM_CHANNEL_PLAN_ETSI 0x2 +#define EEPROM_CHANNEL_PLAN_SPAIN 0x3 +#define EEPROM_CHANNEL_PLAN_FRANCE 0x4 +#define EEPROM_CHANNEL_PLAN_MKK 0x5 +#define EEPROM_CHANNEL_PLAN_MKK1 0x6 +#define EEPROM_CHANNEL_PLAN_ISRAEL 0x7 +#define EEPROM_CHANNEL_PLAN_TELEC 0x8 +#define EEPROM_CHANNEL_PLAN_GLOBAL_DOMAIN 0x9 +#define EEPROM_CHANNEL_PLAN_WORLD_WIDE_13 0xA +#define EEPROM_CHANNEL_PLAN_BY_HW_MASK 0x80 + +#define EEPROM_CID_DEFAULT 0x0 +#define EEPROM_CID_ALPHA 0x1 +#define EEPROM_CID_CAMEO 0X8 +#define EEPROM_CID_SITECOM 0x9 + +//#define EEPROM_CID_RUNTOP 0x2 +//#define EEPROM_CID_Senao 0x3 +//#define EEPROM_CID_TOSHIBA 0x4 +//#define EEPROM_CID_NetCore 0x5 +#define EEPROM_CID_WHQL 0xFE // added by chiyoko for dtm, 20090108 +#endif + +//----------------------------------------------------------------- +// 0x2c0 FW Command Control register definition, added by Roger, 2008.11.27. +//----------------------------------------------------------------- +#define FW_DIG_DISABLE 0xfd00cc00 +#define FW_DIG_ENABLE 0xfd000000 +#define FW_DIG_HALT 0xfd000001 +#define FW_DIG_RESUME 0xfd000002 +#define FW_HIGH_PWR_DISABLE 0xfd000008 +#define FW_HIGH_PWR_ENABLE 0xfd000009 +#define FW_TXPWR_TRACK_ENABLE 0xfd000017 +#define FW_TXPWR_TRACK_DISABLE 0xfd000018 +#define FW_RA_RESET 0xfd0000af +#define FW_RA_ACTIVE 0xfd0000a6 +#define FW_RA_REFRESH 0xfd0000a0 +#define FW_RA_ENABLE_BG 0xfd0000ac +#define FW_IQK_ENABLE 0xf0000020 +#define FW_IQK_SUCCESS 0x0000dddd +#define FW_IQK_FAIL 0x0000ffff +#define FW_OP_FAILURE 0xffffffff +#define FW_DM_DISABLE 0xfd00aa00 +#define FW_BB_RESET_ENABLE 0xff00000d +#define FW_BB_RESET_DISABLE 0xff00000e +#if 0 +//---------------------------------------------------------------------------- +// 8190 EEROM +//---------------------------------------------------------------------------- +#define RTL8190_EEPROM_ID 0x8129 +//#define EEPROM_NODE_ADDRESS_BYTE_0 0x0C + +#define EEPROM_RFInd_PowerDiff 0x28 +#define EEPROM_ThermalMeter 0x29 +#define EEPROM_TxPwDiff_CrystalCap 0x2A //0x2A~0x2B +#define EEPROM_TxPwIndex_CCK 0x2C //0x2C~0x39 +#define EEPROM_TxPwIndex_OFDM_24G 0x3A //0x3A~0x47 +#define EEPROM_TxPwIndex_OFDM_5G 0x34 //0x34~0x7B + +//The following definition is for eeprom 93c56......modified 20080220 +#define EEPROM_C56_CrystalCap 0x17 //0x17 +#define EEPROM_C56_RfA_CCK_Chnl1_TxPwIndex 0x80 //0x80 +#define EEPROM_C56_RfA_HT_OFDM_TxPwIndex 0x81 //0x81~0x83 +#define EEPROM_C56_RfC_CCK_Chnl1_TxPwIndex 0xbc //0xb8 +#define EEPROM_C56_RfC_HT_OFDM_TxPwIndex 0xb9 //0xb9~0xbb +#define EEPROM_Customer_ID 0x7B //0x7B:CustomerID +#define EEPROM_ICVersion_ChannelPlan 0x7C //0x7C:ChnlPlan, + //0x7D:IC_Ver +#define EEPROM_CRC 0x7E //0x7E~0x7F + +#define EEPROM_Default_LegacyHTTxPowerDiff 0x4 +#define EEPROM_Default_ThermalMeter 0x77 +#define EEPROM_Default_AntTxPowerDiff 0x0 +#define EEPROM_Default_TxPwDiff_CrystalCap 0x5 +#define EEPROM_Default_TxPower 0x1010 +#define EEPROM_Default_TxPowerLevel 0x10 + +// +// Define Different EEPROM type for customer +// +#define EEPROM_CID_DEFAULT 0x0 +#define EEPROM_CID_CAMEO 0x1 +#define EEPROM_CID_RUNTOP 0x2 +#define EEPROM_CID_Senao 0x3 +#define EEPROM_CID_TOSHIBA 0x4 +#define EEPROM_CID_NetCore 0x5 +#define EEPROM_CID_Nettronix 0x6 +#define EEPROM_CID_Pronet 0x7 + +#endif + +// +//--------------92SU require delete or move to other place later +// + + + +// +// +// 2008/08/06 MH For share the same 92S source/header files, we copy some +// definition to pass 92SU compiler. But we must delete thm later. +// +// + +//============================================================================ +// 819xUsb Regsiter offset definition +//============================================================================ + +//2 define it temp!!! +#define RFPC 0x5F // Rx FIFO Packet Count +#define RCR_9356SEL BIT6 +#define TCR_LRL_OFFSET 0 +#define TCR_SRL_OFFSET 8 +#define TCR_MXDMA_OFFSET 21 +#define TCR_MXDMA_2048 7 +#define TCR_SAT BIT24 // Enable Rate depedent ack timeout timer +#define RCR_MXDMA_OFFSET 8 +#define RCR_FIFO_OFFSET 13 +#define RCR_OnlyErlPkt BIT31 // Rx Early mode is performed for packet size greater than 1536 +#define CWR 0xDC // Contention window register +#define RetryCTR 0xDE // Retry Count register + + +// For backward compatible for 9xUSB +#define LED1Cfg UnusedRegister // LED1 Configuration Register +#define LED0Cfg UnusedRegister // LED0 Configuration Register +#define GPI UnusedRegister // LED0 Configuration Register +#define BRSR UnusedRegister // LED0 Configuration Register +#define CPU_GEN UnusedRegister // LED0 Configuration Register +#define SIFS UnusedRegister // LED0 Configuration Register + +//---------------------------------------------------------------------------- +// 8190 CPU General Register (offset 0x100, 4 byte) +//---------------------------------------------------------------------------- +//#define CPU_CCK_LOOPBACK 0x00030000 +#define CPU_GEN_SYSTEM_RESET 0x00000001 +//#define CPU_GEN_FIRMWARE_RESET 0x00000008 +//#define CPU_GEN_BOOT_RDY 0x00000010 +//#define CPU_GEN_FIRM_RDY 0x00000020 +//#define CPU_GEN_PUT_CODE_OK 0x00000080 +//#define CPU_GEN_BB_RST 0x00000100 +//#define CPU_GEN_PWR_STB_CPU 0x00000004 +//#define CPU_GEN_NO_LOOPBACK_MSK 0xFFF8FFFF // Set bit18,17,16 to 0. Set bit19 +//#define CPU_GEN_NO_LOOPBACK_SET 0x00080000 // Set BIT19 to 1 + +//---------------------------------------------------------------------------- +// 8192S EEROM +//---------------------------------------------------------------------------- + +//#define RTL8190_EEPROM_ID 0x8129 +//#define EEPROM_VID 0x08 +//#define EEPROM_PID 0x0A +//#define EEPROM_USB_OPTIONAL 0x0C +//#define EEPROM_NODE_ADDRESS_BYTE_0 0x12 +// +//#define EEPROM_TxPowerDiff 0x1F +//#define EEPROM_ThermalMeter 0x20 +//#define EEPROM_PwDiff 0x21 //0x21 +//#define EEPROM_CrystalCap 0x22 //0x22 +// +//#define EEPROM_TxPwIndex_CCK 0x23 //0x23 +//#define EEPROM_TxPwIndex_OFDM_24G 0x24 //0x24~0x26 +#define EEPROM_TxPwIndex_CCK_V1 0x29 //0x29~0x2B +#define EEPROM_TxPwIndex_OFDM_24G_V1 0x2C //0x2C~0x2E +#define EEPROM_TxPwIndex_Ver 0x27 //0x27 +// +//#define EEPROM_Default_TxPowerDiff 0x0 +//#define EEPROM_Default_ThermalMeter 0x7 +//#define EEPROM_Default_PwDiff 0x4 +//#define EEPROM_Default_CrystalCap 0x5 +//#define EEPROM_Default_TxPower 0x1010 +//#define EEPROM_Customer_ID 0x7B //0x7B:CustomerID +//#define EEPROM_Version 0x50 // 0x50 +//#define EEPROM_CustomID 0x52 +//#define EEPROM_ChannelPlan 0x7c //0x7C +//#define EEPROM_IC_VER 0x7d //0x7D +//#define EEPROM_CRC 0x7e //0x7E~0x7F +// +// +//#define EEPROM_CID_DEFAULT 0x0 +//#define EEPROM_CID_CAMEO 0x1 +//#define EEPROM_CID_RUNTOP 0x2 +//#define EEPROM_CID_Senao 0x3 +//#define EEPROM_CID_TOSHIBA 0x4 // Toshiba setting, Merge by Jacken, 2008/01/31 +//#define EEPROM_CID_NetCore 0x5 + + +// +//--------------92SU require delete or move to other place later +// + +//============================================================ +// CCX Related Register +//============================================================ +#define CCX_COMMAND_REG 0x890 +// CCX Measurement Command Register. 4 Bytes. +// Bit[0]: R_CLM_En, 1=enable, 0=disable. Enable or disable "Channel Load +// Measurement (CLM)". +// Bit[1]: R_NHM_En, 1=enable, 0=disable. Enable or disalbe "Noise Histogram +// Measurement (NHM)". +// Bit[2~7]: Reserved +// Bit[8]: R_CCX_En: 1=enable, 0=disable. Enable or disable CCX function. +// Note: After clearing this bit, all the result of all NHM_Result and CLM_ +// Result are cleared concurrently. +// Bit[9]: R_Ignore_CCA: 1=enable, 0=disable. Enable means that treat CCA +// period as idle time for NHM. +// Bit[10]: R_Ignore_TXON: 1=enable, 0=disable. Enable means that treat TXON +// period as idle time for NHM. +// Bit[11~31]: Reserved. +#define CLM_PERIOD_REG 0x894 +// CCX Measurement Period Register, in unit of 4us. 2 Bytes. +#define NHM_PERIOD_REG 0x896 +// Noise Histogram Measurement Period Register, in unit of 4us. 2Bytes. +#define NHM_THRESHOLD0 0x898 // Noise Histogram Meashorement0 +#define NHM_THRESHOLD1 0x899 // Noise Histogram Meashorement1 +#define NHM_THRESHOLD2 0x89A // Noise Histogram Meashorement2 +#define NHM_THRESHOLD3 0x89B // Noise Histogram Meashorement3 +#define NHM_THRESHOLD4 0x89C // Noise Histogram Meashorement4 +#define NHM_THRESHOLD5 0x89D // Noise Histogram Meashorement5 +#define NHM_THRESHOLD6 0x89E // Noise Histogram Meashorement6 +#define CLM_RESULT_REG 0x8D0 +// Channel Load result register. 4 Bytes. +// Bit[0~15]: Total measured duration of CLM. The CCA busy fraction is caculate +// by CLM_RESULT_REG/CLM_PERIOD_REG. +// Bit[16]: Indicate the CLM result is ready. +// Bit[17~31]: Reserved. +#define NHM_RESULT_REG 0x8D4 +// Noise Histogram result register. 4 Bytes. +// Bit[0~15]: Total measured duration of NHM. If R_Ignore_CCA=1 or +// R_Ignore_TXON=1, this value will be less than NHM_PERIOD_REG. +// Bit[16]: Indicate the NHM result is ready. +// Bit[17~31]: Reserved. +#define NHM_RPI_COUNTER0 0x8D8 +// NHM RPI counter0, the fraction of signal strength < NHM_THRESHOLD0. +#define NHM_RPI_COUNTER1 0x8D9 +// NHM RPI counter1, the fraction of signal stren in NHM_THRESH0, NHM_THRESH1 +#define NHM_RPI_COUNTER2 0x8DA +// NHM RPI counter2, the fraction of signal stren in NHM_THRESH2, NHM_THRESH3 +#define NHM_RPI_COUNTER3 0x8DB +// NHM RPI counter3, the fraction of signal stren in NHM_THRESH4, NHM_THRESH5 +#define NHM_RPI_COUNTER4 0x8DC +// NHM RPI counter4, the fraction of signal stren in NHM_THRESH6, NHM_THRESH7 +#define NHM_RPI_COUNTER5 0x8DD +// NHM RPI counter5, the fraction of signal stren in NHM_THRESH8, NHM_THRESH9 +#define NHM_RPI_COUNTER6 0x8DE +// NHM RPI counter6, the fraction of signal stren in NHM_THRESH10, NHM_THRESH11 +#define NHM_RPI_COUNTER7 0x8DF +// NHM RPI counter7, the fraction of signal stren in NHM_THRESH12, NHM_THRESH13 + +#define HAL_RETRY_LIMIT_INFRA 48 +#define HAL_RETRY_LIMIT_AP_ADHOC 7 + +// HW Readio OFF switch (GPIO BIT) +#define HAL_8192S_HW_GPIO_OFF_BIT BIT3 +#define HAL_8192S_HW_GPIO_OFF_MASK 0xF7 +#define HAL_8192S_HW_GPIO_WPS_BIT BIT4 + +#endif //R8192S_HW + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + -- cgit v1.2.3