From 188075211cc75a31190de4a19a084e3d83ee1c89 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 23 Nov 2005 15:45:37 -0800 Subject: [PATCH] USB: EHCI updates split init/reinit logic for resume Moving the PCI-specific parts of the EHCI driver into their own file created a few issues ... notably on resume paths which (like swsusp) require re-initializing the controller. This patch: - Splits the EHCI startup code into run-once HCD setup code and separate "init the hardware" reinit code. (That reinit code is a superset of the "early usb handoff" code.) - Then it makes the PCI init code run both, and the resume code only run the reinit code. - It also removes needless pci wrappers around EHCI start/stop methods. - Removes a byteswap issue that would be seen on big-endian hardware. The HCD glue still doesn't actually provide a good way to do all this run-one init stuff in one place though. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/usb/host/ehci-hcd.c | 157 +++++++++++++++++++++++--------------------- 1 file changed, 83 insertions(+), 74 deletions(-) (limited to 'drivers/usb/host/ehci-hcd.c') diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index f15144e96e1..29f52a44b92 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -411,50 +411,39 @@ static void ehci_stop (struct usb_hcd *hcd) dbg_status (ehci, "ehci_stop completed", readl (&ehci->regs->status)); } -static int ehci_run (struct usb_hcd *hcd) +/* one-time init, only for memory state */ +static int ehci_init(struct usb_hcd *hcd) { - struct ehci_hcd *ehci = hcd_to_ehci (hcd); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); u32 temp; int retval; u32 hcc_params; - int first; - - /* skip some things on restart paths */ - first = (ehci->watchdog.data == 0); - if (first) { - init_timer (&ehci->watchdog); - ehci->watchdog.function = ehci_watchdog; - ehci->watchdog.data = (unsigned long) ehci; - } + + spin_lock_init(&ehci->lock); + + init_timer(&ehci->watchdog); + ehci->watchdog.function = ehci_watchdog; + ehci->watchdog.data = (unsigned long) ehci; /* * hw default: 1K periodic list heads, one per frame. * periodic_size can shrink by USBCMD update if hcc_params allows. */ ehci->periodic_size = DEFAULT_I_TDPS; - if (first && (retval = ehci_mem_init (ehci, GFP_KERNEL)) < 0) + if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0) return retval; /* controllers may cache some of the periodic schedule ... */ - hcc_params = readl (&ehci->caps->hcc_params); - if (HCC_ISOC_CACHE (hcc_params)) // full frame cache + hcc_params = readl(&ehci->caps->hcc_params); + if (HCC_ISOC_CACHE(hcc_params)) // full frame cache ehci->i_thresh = 8; else // N microframes cached - ehci->i_thresh = 2 + HCC_ISOC_THRES (hcc_params); + ehci->i_thresh = 2 + HCC_ISOC_THRES(hcc_params); ehci->reclaim = NULL; ehci->reclaim_ready = 0; ehci->next_uframe = -1; - /* controller state: unknown --> reset */ - - /* EHCI spec section 4.1 */ - if ((retval = ehci_reset (ehci)) != 0) { - ehci_mem_cleanup (ehci); - return retval; - } - writel (ehci->periodic_dma, &ehci->regs->frame_list); - /* * dedicate a qh for the async ring head, since we couldn't unlink * a 'real' qh without stopping the async schedule [4.8]. use it @@ -462,37 +451,13 @@ static int ehci_run (struct usb_hcd *hcd) * its dummy is used in hw_alt_next of many tds, to prevent the qh * from automatically advancing to the next td after short reads. */ - if (first) { - ehci->async->qh_next.qh = NULL; - ehci->async->hw_next = QH_NEXT (ehci->async->qh_dma); - ehci->async->hw_info1 = cpu_to_le32 (QH_HEAD); - ehci->async->hw_token = cpu_to_le32 (QTD_STS_HALT); - ehci->async->hw_qtd_next = EHCI_LIST_END; - ehci->async->qh_state = QH_STATE_LINKED; - ehci->async->hw_alt_next = QTD_NEXT (ehci->async->dummy->qtd_dma); - } - writel ((u32)ehci->async->qh_dma, &ehci->regs->async_next); - - /* - * hcc_params controls whether ehci->regs->segment must (!!!) - * be used; it constrains QH/ITD/SITD and QTD locations. - * pci_pool consistent memory always uses segment zero. - * streaming mappings for I/O buffers, like pci_map_single(), - * can return segments above 4GB, if the device allows. - * - * NOTE: the dma mask is visible through dma_supported(), so - * drivers can pass this info along ... like NETIF_F_HIGHDMA, - * Scsi_Host.highmem_io, and so forth. It's readonly to all - * host side drivers though. - */ - if (HCC_64BIT_ADDR (hcc_params)) { - writel (0, &ehci->regs->segment); -#if 0 -// this is deeply broken on almost all architectures - if (!dma_set_mask (hcd->self.controller, DMA_64BIT_MASK)) - ehci_info (ehci, "enabled 64bit DMA\n"); -#endif - } + ehci->async->qh_next.qh = NULL; + ehci->async->hw_next = QH_NEXT(ehci->async->qh_dma); + ehci->async->hw_info1 = cpu_to_le32(QH_HEAD); + ehci->async->hw_token = cpu_to_le32(QTD_STS_HALT); + ehci->async->hw_qtd_next = EHCI_LIST_END; + ehci->async->qh_state = QH_STATE_LINKED; + ehci->async->hw_alt_next = QTD_NEXT(ehci->async->dummy->qtd_dma); /* clear interrupt enables, set irq latency */ if (log2_irq_thresh < 0 || log2_irq_thresh > 6) @@ -507,13 +472,13 @@ static int ehci_run (struct usb_hcd *hcd) * make problems: throughput reduction (!), data errors... */ if (park) { - park = min (park, (unsigned) 3); + park = min(park, (unsigned) 3); temp |= CMD_PARK; temp |= park << 8; } - ehci_info (ehci, "park %d\n", park); + ehci_dbg(ehci, "park %d\n", park); } - if (HCC_PGM_FRAMELISTLEN (hcc_params)) { + if (HCC_PGM_FRAMELISTLEN(hcc_params)) { /* periodic schedule size can be smaller than default */ temp &= ~(3 << 2); temp |= (EHCI_TUNE_FLS << 2); @@ -521,16 +486,63 @@ static int ehci_run (struct usb_hcd *hcd) case 0: ehci->periodic_size = 1024; break; case 1: ehci->periodic_size = 512; break; case 2: ehci->periodic_size = 256; break; - default: BUG (); + default: BUG(); } } + ehci->command = temp; + + ehci->reboot_notifier.notifier_call = ehci_reboot; + register_reboot_notifier(&ehci->reboot_notifier); + + return 0; +} + +/* start HC running; it's halted, ehci_init() has been run (once) */ +static int ehci_run (struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci (hcd); + int retval; + u32 temp; + u32 hcc_params; + + /* EHCI spec section 4.1 */ + if ((retval = ehci_reset(ehci)) != 0) { + unregister_reboot_notifier(&ehci->reboot_notifier); + ehci_mem_cleanup(ehci); + return retval; + } + writel(ehci->periodic_dma, &ehci->regs->frame_list); + writel((u32)ehci->async->qh_dma, &ehci->regs->async_next); + + /* + * hcc_params controls whether ehci->regs->segment must (!!!) + * be used; it constrains QH/ITD/SITD and QTD locations. + * pci_pool consistent memory always uses segment zero. + * streaming mappings for I/O buffers, like pci_map_single(), + * can return segments above 4GB, if the device allows. + * + * NOTE: the dma mask is visible through dma_supported(), so + * drivers can pass this info along ... like NETIF_F_HIGHDMA, + * Scsi_Host.highmem_io, and so forth. It's readonly to all + * host side drivers though. + */ + hcc_params = readl(&ehci->caps->hcc_params); + if (HCC_64BIT_ADDR(hcc_params)) { + writel(0, &ehci->regs->segment); +#if 0 +// this is deeply broken on almost all architectures + if (!dma_set_mask(hcd->self.controller, DMA_64BIT_MASK)) + ehci_info(ehci, "enabled 64bit DMA\n"); +#endif + } + + // Philips, Intel, and maybe others need CMD_RUN before the // root hub will detect new devices (why?); NEC doesn't - temp |= CMD_RUN; - writel (temp, &ehci->regs->command); - dbg_cmd (ehci, "init", temp); - - /* set async sleep time = 10 us ... ? */ + ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET); + ehci->command |= CMD_RUN; + writel (ehci->command, &ehci->regs->command); + dbg_cmd (ehci, "init", ehci->command); /* * Start, enabling full USB 2.0 functionality ... usb 1.1 devices @@ -538,26 +550,23 @@ static int ehci_run (struct usb_hcd *hcd) * involved with the root hub. (Except where one is integrated, * and there's no companion controller unless maybe for USB OTG.) */ - if (first) { - ehci->reboot_notifier.notifier_call = ehci_reboot; - register_reboot_notifier (&ehci->reboot_notifier); - } - hcd->state = HC_STATE_RUNNING; writel (FLAG_CF, &ehci->regs->configured_flag); - readl (&ehci->regs->command); /* unblock posted write */ + readl (&ehci->regs->command); /* unblock posted writes */ temp = HC_VERSION(readl (&ehci->caps->hc_capbase)); ehci_info (ehci, - "USB %x.%x %s, EHCI %x.%02x, driver %s\n", + "USB %x.%x started, EHCI %x.%02x, driver %s\n", ((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f), - first ? "initialized" : "restarted", temp >> 8, temp & 0xff, DRIVER_VERSION); writel (INTR_MASK, &ehci->regs->intr_enable); /* Turn On Interrupts */ - if (first) - create_debug_files (ehci); + /* GRR this is run-once init(), being done every time the HC starts. + * So long as they're part of class devices, we can't do it init() + * since the class device isn't created that early. + */ + create_debug_files(ehci); return 0; } -- cgit v1.2.3