From 0c392ed9a78cbe0f54955ea4716ade8bc22eb00d Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Sat, 4 Oct 2008 12:57:21 +0800 Subject: [ARM] ohci-pxa27x: use ioremap() and offset for register access This avoid the pre-mapping of OHCI controller register space, and the mapping is made only when necessary (OHCI is probed). Signed-off-by: Eric Miao Signed-off-by: Russell King --- drivers/usb/host/ohci-pxa27x.c | 188 ++++++++++++++++++++++++----------------- 1 file changed, 109 insertions(+), 79 deletions(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index 1fd77933a4c..e294d430733 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -23,46 +23,43 @@ #include #include #include - -#include #include /* * UHC: USB Host Controller (OHCI-like) register definitions */ -#define UHC_BASE_PHYS (0x4C000000) -#define UHCREV __REG(0x4C000000) /* UHC HCI Spec Revision */ -#define UHCHCON __REG(0x4C000004) /* UHC Host Control Register */ -#define UHCCOMS __REG(0x4C000008) /* UHC Command Status Register */ -#define UHCINTS __REG(0x4C00000C) /* UHC Interrupt Status Register */ -#define UHCINTE __REG(0x4C000010) /* UHC Interrupt Enable */ -#define UHCINTD __REG(0x4C000014) /* UHC Interrupt Disable */ -#define UHCHCCA __REG(0x4C000018) /* UHC Host Controller Comm. Area */ -#define UHCPCED __REG(0x4C00001C) /* UHC Period Current Endpt Descr */ -#define UHCCHED __REG(0x4C000020) /* UHC Control Head Endpt Descr */ -#define UHCCCED __REG(0x4C000024) /* UHC Control Current Endpt Descr */ -#define UHCBHED __REG(0x4C000028) /* UHC Bulk Head Endpt Descr */ -#define UHCBCED __REG(0x4C00002C) /* UHC Bulk Current Endpt Descr */ -#define UHCDHEAD __REG(0x4C000030) /* UHC Done Head */ -#define UHCFMI __REG(0x4C000034) /* UHC Frame Interval */ -#define UHCFMR __REG(0x4C000038) /* UHC Frame Remaining */ -#define UHCFMN __REG(0x4C00003C) /* UHC Frame Number */ -#define UHCPERS __REG(0x4C000040) /* UHC Periodic Start */ -#define UHCLS __REG(0x4C000044) /* UHC Low Speed Threshold */ - -#define UHCRHDA __REG(0x4C000048) /* UHC Root Hub Descriptor A */ +#define UHCREV (0x0000) /* UHC HCI Spec Revision */ +#define UHCHCON (0x0004) /* UHC Host Control Register */ +#define UHCCOMS (0x0008) /* UHC Command Status Register */ +#define UHCINTS (0x000C) /* UHC Interrupt Status Register */ +#define UHCINTE (0x0010) /* UHC Interrupt Enable */ +#define UHCINTD (0x0014) /* UHC Interrupt Disable */ +#define UHCHCCA (0x0018) /* UHC Host Controller Comm. Area */ +#define UHCPCED (0x001C) /* UHC Period Current Endpt Descr */ +#define UHCCHED (0x0020) /* UHC Control Head Endpt Descr */ +#define UHCCCED (0x0024) /* UHC Control Current Endpt Descr */ +#define UHCBHED (0x0028) /* UHC Bulk Head Endpt Descr */ +#define UHCBCED (0x002C) /* UHC Bulk Current Endpt Descr */ +#define UHCDHEAD (0x0030) /* UHC Done Head */ +#define UHCFMI (0x0034) /* UHC Frame Interval */ +#define UHCFMR (0x0038) /* UHC Frame Remaining */ +#define UHCFMN (0x003C) /* UHC Frame Number */ +#define UHCPERS (0x0040) /* UHC Periodic Start */ +#define UHCLS (0x0044) /* UHC Low Speed Threshold */ + +#define UHCRHDA (0x0048) /* UHC Root Hub Descriptor A */ #define UHCRHDA_NOCP (1 << 12) /* No over current protection */ #define UHCRHDA_OCPM (1 << 11) /* Over Current Protection Mode */ #define UHCRHDA_POTPGT(x) \ (((x) & 0xff) << 24) /* Power On To Power Good Time */ -#define UHCRHDB __REG(0x4C00004C) /* UHC Root Hub Descriptor B */ -#define UHCRHS __REG(0x4C000050) /* UHC Root Hub Status */ -#define UHCRHPS1 __REG(0x4C000054) /* UHC Root Hub Port 1 Status */ -#define UHCRHPS2 __REG(0x4C000058) /* UHC Root Hub Port 2 Status */ -#define UHCRHPS3 __REG(0x4C00005C) /* UHC Root Hub Port 3 Status */ +#define UHCRHDB (0x004C) /* UHC Root Hub Descriptor B */ +#define UHCRHS (0x0050) /* UHC Root Hub Status */ +#define UHCRHPS1 (0x0054) /* UHC Root Hub Port 1 Status */ +#define UHCRHPS2 (0x0058) /* UHC Root Hub Port 2 Status */ +#define UHCRHPS3 (0x005C) /* UHC Root Hub Port 3 Status */ -#define UHCSTAT __REG(0x4C000060) /* UHC Status Register */ +#define UHCSTAT (0x0060) /* UHC Status Register */ #define UHCSTAT_UPS3 (1 << 16) /* USB Power Sense Port3 */ #define UHCSTAT_SBMAI (1 << 15) /* System Bus Master Abort Interrupt*/ #define UHCSTAT_SBTAI (1 << 14) /* System Bus Target Abort Interrupt*/ @@ -73,7 +70,7 @@ #define UHCSTAT_HBA (1 << 8) /* HCI Buffer Active */ #define UHCSTAT_RWUE (1 << 7) /* HCI Remote Wake Up Event */ -#define UHCHR __REG(0x4C000064) /* UHC Reset Register */ +#define UHCHR (0x0064) /* UHC Reset Register */ #define UHCHR_SSEP3 (1 << 11) /* Sleep Standby Enable for Port3 */ #define UHCHR_SSEP2 (1 << 10) /* Sleep Standby Enable for Port2 */ #define UHCHR_SSEP1 (1 << 9) /* Sleep Standby Enable for Port1 */ @@ -86,7 +83,7 @@ #define UHCHR_FHR (1 << 1) /* Force Host Controller Reset */ #define UHCHR_FSBIR (1 << 0) /* Force System Bus Iface Reset */ -#define UHCHIE __REG(0x4C000068) /* UHC Interrupt Enable Register*/ +#define UHCHIE (0x0068) /* UHC Interrupt Enable Register*/ #define UHCHIE_UPS3IE (1 << 14) /* Power Sense Port3 IntEn */ #define UHCHIE_UPRIE (1 << 13) /* Port Resume IntEn */ #define UHCHIE_UPS2IE (1 << 12) /* Power Sense Port2 IntEn */ @@ -96,14 +93,20 @@ #define UHCHIE_HBAIE (1 << 8) /* HCI Buffer Active IntEn */ #define UHCHIE_RWIE (1 << 7) /* Remote Wake-up IntEn */ -#define UHCHIT __REG(0x4C00006C) /* UHC Interrupt Test register */ - +#define UHCHIT (0x006C) /* UHC Interrupt Test register */ #define PXA_UHC_MAX_PORTNUM 3 -#define UHCRHPS(x) __REG2( 0x4C000050, (x)<<2 ) +struct pxa27x_ohci { + /* must be 1st member here for hcd_to_ohci() to work */ + struct ohci_hcd ohci; -static struct clk *usb_clk; + struct device *dev; + struct clk *clk; + void __iomem *mmio_base; +}; + +#define to_pxa27x_ohci(hcd) (struct pxa27x_ohci *)hcd_to_ohci(hcd) /* PMM_NPS_MODE -- PMM Non-power switching mode @@ -115,30 +118,35 @@ static struct clk *usb_clk; PMM_PERPORT_MODE -- PMM per port switching mode Ports are powered individually. */ -static int pxa27x_ohci_select_pmm( int mode ) +static int pxa27x_ohci_select_pmm(struct pxa27x_ohci *ohci, int mode) { - switch ( mode ) { + uint32_t uhcrhda = __raw_readl(ohci->mmio_base + UHCRHDA); + uint32_t uhcrhdb = __raw_readl(ohci->mmio_base + UHCRHDB); + + switch (mode) { case PMM_NPS_MODE: - UHCRHDA |= RH_A_NPS; + uhcrhda |= RH_A_NPS; break; case PMM_GLOBAL_MODE: - UHCRHDA &= ~(RH_A_NPS & RH_A_PSM); + uhcrhda &= ~(RH_A_NPS & RH_A_PSM); break; case PMM_PERPORT_MODE: - UHCRHDA &= ~(RH_A_NPS); - UHCRHDA |= RH_A_PSM; + uhcrhda &= ~(RH_A_NPS); + uhcrhda |= RH_A_PSM; /* Set port power control mask bits, only 3 ports. */ - UHCRHDB |= (0x7<<17); + uhcrhdb |= (0x7<<17); break; default: printk( KERN_ERR "Invalid mode %d, set to non-power switch mode.\n", mode ); - UHCRHDA |= RH_A_NPS; + uhcrhda |= RH_A_NPS; } + __raw_writel(uhcrhda, ohci->mmio_base + UHCRHDA); + __raw_writel(uhcrhdb, ohci->mmio_base + UHCRHDB); return 0; } @@ -146,10 +154,11 @@ extern int usb_disabled(void); /*-------------------------------------------------------------------------*/ -static inline void pxa27x_setup_hc(struct pxaohci_platform_data *inf) +static inline void pxa27x_setup_hc(struct pxa27x_ohci *ohci, + struct pxaohci_platform_data *inf) { - uint32_t uhchr = UHCHR; - uint32_t uhcrhda = UHCRHDA; + uint32_t uhchr = __raw_readl(ohci->mmio_base + UHCHR); + uint32_t uhcrhda = __raw_readl(ohci->mmio_base + UHCRHDA); if (inf->flags & ENABLE_PORT1) uhchr &= ~UHCHR_SSEP1; @@ -177,8 +186,17 @@ static inline void pxa27x_setup_hc(struct pxaohci_platform_data *inf) uhcrhda |= UHCRHDA_POTPGT(inf->power_on_delay / 2); } - UHCHR = uhchr; - UHCRHDA = uhcrhda; + __raw_writel(uhchr, ohci->mmio_base + UHCHR); + __raw_writel(uhcrhda, ohci->mmio_base + UHCRHDA); +} + +static inline void pxa27x_reset_hc(struct pxa27x_ohci *ohci) +{ + uint32_t uhchr = __raw_readl(ohci->mmio_base + UHCHR); + + __raw_writel(uhchr | UHCHR_FHR, ohci->mmio_base + UHCHR); + udelay(11); + __raw_writel(uhchr & ~UHCHR_FHR, ohci->mmio_base + UHCHR); } #ifdef CONFIG_CPU_PXA27x @@ -187,24 +205,25 @@ extern void pxa27x_clear_otgph(void); #define pxa27x_clear_otgph() do {} while (0) #endif -static int pxa27x_start_hc(struct device *dev) +static int pxa27x_start_hc(struct pxa27x_ohci *ohci, struct device *dev) { int retval = 0; struct pxaohci_platform_data *inf; + uint32_t uhchr; inf = dev->platform_data; - clk_enable(usb_clk); + clk_enable(ohci->clk); - UHCHR |= UHCHR_FHR; - udelay(11); - UHCHR &= ~UHCHR_FHR; + pxa27x_reset_hc(ohci); - UHCHR |= UHCHR_FSBIR; - while (UHCHR & UHCHR_FSBIR) + uhchr = __raw_readl(ohci->mmio_base + UHCHR) | UHCHR_FSBIR; + __raw_writel(uhchr, ohci->mmio_base + UHCHR); + + while (__raw_readl(ohci->mmio_base + UHCHR) & UHCHR_FSBIR) cpu_relax(); - pxa27x_setup_hc(inf); + pxa27x_setup_hc(ohci, inf); if (inf->init) retval = inf->init(dev); @@ -212,32 +231,33 @@ static int pxa27x_start_hc(struct device *dev) if (retval < 0) return retval; - UHCHR &= ~UHCHR_SSE; - - UHCHIE = (UHCHIE_UPRIE | UHCHIE_RWIE); + uhchr = __raw_readl(ohci->mmio_base + UHCHR) & ~UHCHR_SSE; + __raw_writel(uhchr, ohci->mmio_base + UHCHR); + __raw_writel(UHCHIE_UPRIE | UHCHIE_RWIE, ohci->mmio_base + UHCHIE); /* Clear any OTG Pin Hold */ pxa27x_clear_otgph(); return 0; } -static void pxa27x_stop_hc(struct device *dev) +static void pxa27x_stop_hc(struct pxa27x_ohci *ohci, struct device *dev) { struct pxaohci_platform_data *inf; + uint32_t uhccoms; inf = dev->platform_data; if (inf->exit) inf->exit(dev); - UHCHR |= UHCHR_FHR; - udelay(11); - UHCHR &= ~UHCHR_FHR; + pxa27x_reset_hc(ohci); - UHCCOMS |= 1; + /* Host Controller Reset */ + uhccoms = __raw_readl(ohci->mmio_base + UHCCOMS) | 0x01; + __raw_writel(uhccoms, ohci->mmio_base + UHCCOMS); udelay(10); - clk_disable(usb_clk); + clk_disable(ohci->clk); } @@ -261,7 +281,9 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device int retval, irq; struct usb_hcd *hcd; struct pxaohci_platform_data *inf; + struct pxa27x_ohci *ohci; struct resource *r; + struct clk *usb_clk; inf = pdev->dev.platform_data; @@ -305,13 +327,19 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device goto err2; } - if ((retval = pxa27x_start_hc(&pdev->dev)) < 0) { + /* initialize "struct pxa27x_ohci" */ + ohci = (struct pxa27x_ohci *)hcd_to_ohci(hcd); + ohci->dev = &pdev->dev; + ohci->clk = usb_clk; + ohci->mmio_base = (void __iomem *)hcd->regs; + + if ((retval = pxa27x_start_hc(ohci, &pdev->dev)) < 0) { pr_debug("pxa27x_start_hc failed"); goto err3; } /* Select Power Management Mode */ - pxa27x_ohci_select_pmm(inf->port_mode); + pxa27x_ohci_select_pmm(ohci, inf->port_mode); if (inf->power_budget) hcd->power_budget = inf->power_budget; @@ -322,7 +350,7 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device if (retval == 0) return retval; - pxa27x_stop_hc(&pdev->dev); + pxa27x_stop_hc(ohci, &pdev->dev); err3: iounmap(hcd->regs); err2: @@ -349,12 +377,14 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device */ void usb_hcd_pxa27x_remove (struct usb_hcd *hcd, struct platform_device *pdev) { + struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd); + usb_remove_hcd(hcd); - pxa27x_stop_hc(&pdev->dev); + pxa27x_stop_hc(ohci, &pdev->dev); iounmap(hcd->regs); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); - clk_put(usb_clk); + clk_put(ohci->clk); } /*-------------------------------------------------------------------------*/ @@ -387,7 +417,7 @@ ohci_pxa27x_start (struct usb_hcd *hcd) static const struct hc_driver ohci_pxa27x_hc_driver = { .description = hcd_name, .product_desc = "PXA27x OHCI", - .hcd_priv_size = sizeof(struct ohci_hcd), + .hcd_priv_size = sizeof(struct pxa27x_ohci), /* * generic hardware linkage @@ -451,13 +481,13 @@ static int ohci_hcd_pxa27x_drv_remove(struct platform_device *pdev) static int ohci_hcd_pxa27x_drv_suspend(struct platform_device *pdev, pm_message_t state) { struct usb_hcd *hcd = platform_get_drvdata(pdev); - struct ohci_hcd *ohci = hcd_to_ohci(hcd); + struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd); - if (time_before(jiffies, ohci->next_statechange)) + if (time_before(jiffies, ohci->ohci.next_statechange)) msleep(5); - ohci->next_statechange = jiffies; + ohci->ohci.next_statechange = jiffies; - pxa27x_stop_hc(&pdev->dev); + pxa27x_stop_hc(ohci, &pdev->dev); hcd->state = HC_STATE_SUSPENDED; return 0; @@ -466,14 +496,14 @@ static int ohci_hcd_pxa27x_drv_suspend(struct platform_device *pdev, pm_message_ static int ohci_hcd_pxa27x_drv_resume(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); - struct ohci_hcd *ohci = hcd_to_ohci(hcd); + struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd); int status; - if (time_before(jiffies, ohci->next_statechange)) + if (time_before(jiffies, ohci->ohci.next_statechange)) msleep(5); - ohci->next_statechange = jiffies; + ohci->ohci.next_statechange = jiffies; - if ((status = pxa27x_start_hc(&pdev->dev)) < 0) + if ((status = pxa27x_start_hc(ohci, &pdev->dev)) < 0) return status; ohci_finish_controller_resume(hcd); -- cgit v1.2.3