From 0af36739af81f152cc24a0fdfa0754ef657afe3d Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 24 Jul 2008 17:27:57 -0700 Subject: usb: move ehci reg def prepare x86: usb debug port early console move ehci struct def to linux/usrb/ehci_def.h from host/ehci.h Signed-off-by: Yinghai Lu Acked-by: David Brownell Cc: Andrew Morton Cc: Andi Kleen Cc: "Arjan van de Ven" Cc: "Eric W. Biederman" Cc: "Greg KH" Signed-off-by: Ingo Molnar --- drivers/usb/host/ehci.h | 138 +----------------------------------------------- 1 file changed, 1 insertion(+), 137 deletions(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 5799298364f..b697a13364e 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -210,143 +210,7 @@ timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action) /*-------------------------------------------------------------------------*/ -/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */ - -/* Section 2.2 Host Controller Capability Registers */ -struct ehci_caps { - /* these fields are specified as 8 and 16 bit registers, - * but some hosts can't perform 8 or 16 bit PCI accesses. - */ - u32 hc_capbase; -#define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */ -#define HC_VERSION(p) (((p)>>16)&0xffff) /* bits 31:16 */ - u32 hcs_params; /* HCSPARAMS - offset 0x4 */ -#define HCS_DEBUG_PORT(p) (((p)>>20)&0xf) /* bits 23:20, debug port? */ -#define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */ -#define HCS_N_CC(p) (((p)>>12)&0xf) /* bits 15:12, #companion HCs */ -#define HCS_N_PCC(p) (((p)>>8)&0xf) /* bits 11:8, ports per CC */ -#define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */ -#define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */ -#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */ - - u32 hcc_params; /* HCCPARAMS - offset 0x8 */ -#define HCC_EXT_CAPS(p) (((p)>>8)&0xff) /* for pci extended caps */ -#define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */ -#define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */ -#define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */ -#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/ -#define HCC_64BIT_ADDR(p) ((p)&(1)) /* true: can use 64-bit addr */ - u8 portroute [8]; /* nibbles for routing - offset 0xC */ -} __attribute__ ((packed)); - - -/* Section 2.3 Host Controller Operational Registers */ -struct ehci_regs { - - /* USBCMD: offset 0x00 */ - u32 command; -/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */ -#define CMD_PARK (1<<11) /* enable "park" on async qh */ -#define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */ -#define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */ -#define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */ -#define CMD_ASE (1<<5) /* async schedule enable */ -#define CMD_PSE (1<<4) /* periodic schedule enable */ -/* 3:2 is periodic frame list size */ -#define CMD_RESET (1<<1) /* reset HC not bus */ -#define CMD_RUN (1<<0) /* start/stop HC */ - - /* USBSTS: offset 0x04 */ - u32 status; -#define STS_ASS (1<<15) /* Async Schedule Status */ -#define STS_PSS (1<<14) /* Periodic Schedule Status */ -#define STS_RECL (1<<13) /* Reclamation */ -#define STS_HALT (1<<12) /* Not running (any reason) */ -/* some bits reserved */ - /* these STS_* flags are also intr_enable bits (USBINTR) */ -#define STS_IAA (1<<5) /* Interrupted on async advance */ -#define STS_FATAL (1<<4) /* such as some PCI access errors */ -#define STS_FLR (1<<3) /* frame list rolled over */ -#define STS_PCD (1<<2) /* port change detect */ -#define STS_ERR (1<<1) /* "error" completion (overflow, ...) */ -#define STS_INT (1<<0) /* "normal" completion (short, ...) */ - - /* USBINTR: offset 0x08 */ - u32 intr_enable; - - /* FRINDEX: offset 0x0C */ - u32 frame_index; /* current microframe number */ - /* CTRLDSSEGMENT: offset 0x10 */ - u32 segment; /* address bits 63:32 if needed */ - /* PERIODICLISTBASE: offset 0x14 */ - u32 frame_list; /* points to periodic list */ - /* ASYNCLISTADDR: offset 0x18 */ - u32 async_next; /* address of next async queue head */ - - u32 reserved [9]; - - /* CONFIGFLAG: offset 0x40 */ - u32 configured_flag; -#define FLAG_CF (1<<0) /* true: we'll support "high speed" */ - - /* PORTSC: offset 0x44 */ - u32 port_status [0]; /* up to N_PORTS */ -/* 31:23 reserved */ -#define PORT_WKOC_E (1<<22) /* wake on overcurrent (enable) */ -#define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */ -#define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */ -/* 19:16 for port testing */ -#define PORT_LED_OFF (0<<14) -#define PORT_LED_AMBER (1<<14) -#define PORT_LED_GREEN (2<<14) -#define PORT_LED_MASK (3<<14) -#define PORT_OWNER (1<<13) /* true: companion hc owns this port */ -#define PORT_POWER (1<<12) /* true: has power (see PPC) */ -#define PORT_USB11(x) (((x)&(3<<10))==(1<<10)) /* USB 1.1 device */ -/* 11:10 for detecting lowspeed devices (reset vs release ownership) */ -/* 9 reserved */ -#define PORT_RESET (1<<8) /* reset port */ -#define PORT_SUSPEND (1<<7) /* suspend port */ -#define PORT_RESUME (1<<6) /* resume it */ -#define PORT_OCC (1<<5) /* over current change */ -#define PORT_OC (1<<4) /* over current active */ -#define PORT_PEC (1<<3) /* port enable change */ -#define PORT_PE (1<<2) /* port enable */ -#define PORT_CSC (1<<1) /* connect status change */ -#define PORT_CONNECT (1<<0) /* device connected */ -#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC) -} __attribute__ ((packed)); - -#define USBMODE 0x68 /* USB Device mode */ -#define USBMODE_SDIS (1<<3) /* Stream disable */ -#define USBMODE_BE (1<<2) /* BE/LE endianness select */ -#define USBMODE_CM_HC (3<<0) /* host controller mode */ -#define USBMODE_CM_IDLE (0<<0) /* idle state */ - -/* Appendix C, Debug port ... intended for use with special "debug devices" - * that can help if there's no serial console. (nonstandard enumeration.) - */ -struct ehci_dbg_port { - u32 control; -#define DBGP_OWNER (1<<30) -#define DBGP_ENABLED (1<<28) -#define DBGP_DONE (1<<16) -#define DBGP_INUSE (1<<10) -#define DBGP_ERRCODE(x) (((x)>>7)&0x07) -# define DBGP_ERR_BAD 1 -# define DBGP_ERR_SIGNAL 2 -#define DBGP_ERROR (1<<6) -#define DBGP_GO (1<<5) -#define DBGP_OUT (1<<4) -#define DBGP_LEN(x) (((x)>>0)&0x0f) - u32 pids; -#define DBGP_PID_GET(x) (((x)>>16)&0xff) -#define DBGP_PID_SET(data,tok) (((data)<<8)|(tok)) - u32 data03; - u32 data47; - u32 address; -#define DBGP_EPADDR(dev,ep) (((dev)<<8)|(ep)) -} __attribute__ ((packed)); +#include /*-------------------------------------------------------------------------*/ -- cgit v1.2.3 From 84e2d34004dcd0c90d1af43a143511b334f11a4d Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Tue, 29 Jul 2008 08:38:55 +0200 Subject: pcmcia: use pcmcia_loop_config in misc pcmcia drivers Use the config loop helper in misc pcmcia drivers. CC: Harald Welte CC: CC: Russell King CC: Ed Okerson CC: linux-serial@vger.kernel.org CC: boti@rocketmail.com CC: linux-usb@vger.kernel.org Signed-off-by: Dominik Brodowski --- drivers/usb/host/sl811_cs.c | 140 ++++++++++++++++++++++---------------------- 1 file changed, 69 insertions(+), 71 deletions(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c index 5da63f53500..9773601bf0b 100644 --- a/drivers/usb/host/sl811_cs.c +++ b/drivers/usb/host/sl811_cs.c @@ -155,88 +155,84 @@ static void sl811_cs_release(struct pcmcia_device * link) platform_device_unregister(&platform_dev); } +struct sl811_css_cfg { + cistpl_cftable_entry_t dflt; + config_info_t conf; +}; + +static int sl811_cs_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + void *priv_data) +{ + struct sl811_css_cfg *cfg_mem = priv_data; + + if (cfg->flags & CISTPL_CFTABLE_DEFAULT) + memcpy(&cfg_mem->dflt, cfg, sizeof(cistpl_cftable_entry_t)); + + if (cfg->index == 0) + return -ENODEV; + + p_dev->conf.ConfigIndex = cfg->index; + + /* Use power settings for Vcc and Vpp if present */ + /* Note that the CIS values need to be rescaled */ + if (cfg->vcc.present & (1<vcc.param[CISTPL_POWER_VNOM]/10000 != + cfg_mem->conf.Vcc) + return -ENODEV; + } else if (cfg_mem->dflt.vcc.present & (1<dflt.vcc.param[CISTPL_POWER_VNOM]/10000 + != cfg_mem->conf.Vcc) + return -ENODEV; + } + + if (cfg->vpp1.present & (1<conf.Vpp = + cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; + else if (cfg_mem->dflt.vpp1.present & (1<conf.Vpp = + cfg_mem->dflt.vpp1.param[CISTPL_POWER_VNOM]/10000; + + /* we need an interrupt */ + if (cfg->irq.IRQInfo1 || cfg_mem->dflt.irq.IRQInfo1) + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + + /* IO window settings */ + p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + if ((cfg->io.nwin > 0) || (cfg_mem->dflt.io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &cfg_mem->dflt.io; + + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->io.BasePort1 = io->win[0].base; + p_dev->io.NumPorts1 = io->win[0].len; + + return pcmcia_request_io(p_dev, &p_dev->io); + } + pcmcia_disable_device(p_dev); + return -ENODEV; +} + + static int sl811_cs_config(struct pcmcia_device *link) { struct device *parent = &handle_to_dev(link); local_info_t *dev = link->priv; - tuple_t tuple; - cisparse_t parse; int last_fn, last_ret; - u_char buf[64]; - config_info_t conf; - cistpl_cftable_entry_t dflt = { 0 }; + struct sl811_css_cfg *cfg_mem; DBG(0, "sl811_cs_config(0x%p)\n", link); + cfg_mem = kzalloc(sizeof(struct sl811_css_cfg), GFP_KERNEL); + if (!cfg_mem) + return -ENOMEM; + /* Look up the current Vcc */ CS_CHECK(GetConfigurationInfo, - pcmcia_get_configuration_info(link, &conf)); - - tuple.Attributes = 0; - tuple.TupleData = buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - while (1) { - cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); - - if (pcmcia_get_tuple_data(link, &tuple) != 0 - || pcmcia_parse_tuple(link, &tuple, &parse) - != 0) - goto next_entry; - - if (cfg->flags & CISTPL_CFTABLE_DEFAULT) { - dflt = *cfg; - } + pcmcia_get_configuration_info(link, &cfg_mem->conf)); - if (cfg->index == 0) - goto next_entry; - - link->conf.ConfigIndex = cfg->index; - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1<vcc.param[CISTPL_POWER_VNOM]/10000 - != conf.Vcc) - goto next_entry; - } else if (dflt.vcc.present & (1<vpp1.present & (1<conf.Vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; - else if (dflt.vpp1.present & (1<conf.Vpp = - dflt.vpp1.param[CISTPL_POWER_VNOM]/10000; - - /* we need an interrupt */ - if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) - link->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - link->io.NumPorts1 = link->io.NumPorts2 = 0; - if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io; - - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - link->io.BasePort1 = io->win[0].base; - link->io.NumPorts1 = io->win[0].len; - - if (pcmcia_request_io(link, &link->io) != 0) - goto next_entry; - } - break; - -next_entry: - pcmcia_disable_device(link); - last_ret = pcmcia_get_next_tuple(link, &tuple); - } + if (pcmcia_loop_config(link, sl811_cs_config_check, cfg_mem)) + return -ENODEV; /* require an IRQ and two registers */ if (!link->io.NumPorts1 || link->io.NumPorts1 < 2) @@ -269,8 +265,10 @@ cs_failed: printk("sl811_cs_config failed\n"); cs_error(link, last_fn, last_ret); sl811_cs_release(link); + kfree(cfg_mem); return -ENODEV; } + kfree(cfg_mem); return 0; } -- cgit v1.2.3 From 498ac1899b62626bf6879a251d75c22ec564c559 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Sat, 2 Aug 2008 14:59:13 +0200 Subject: pcmcia: pcmcia_config_loop() ConfigIndex unification Almost all drivers set p_dev->conf.ConfigIndex to cfg->index in the pcmcia_config_loop() callback function. Therefore, factor it out. Signed-off-by: Dominik Brodowski --- drivers/usb/host/sl811_cs.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c index 9773601bf0b..5b55c72c710 100644 --- a/drivers/usb/host/sl811_cs.c +++ b/drivers/usb/host/sl811_cs.c @@ -172,8 +172,6 @@ static int sl811_cs_config_check(struct pcmcia_device *p_dev, if (cfg->index == 0) return -ENODEV; - p_dev->conf.ConfigIndex = cfg->index; - /* Use power settings for Vcc and Vpp if present */ /* Note that the CIS values need to be rescaled */ if (cfg->vcc.present & (1< Date: Sat, 2 Aug 2008 15:30:31 +0200 Subject: pcmcia: pcmcia_config_loop() default CIS entry handling Many drivers use the default CIS entry within their pcmcia_config_loop() callback function. Therefore, factor the default CIS entry handling out. Signed-off-by: Dominik Brodowski --- drivers/usb/host/sl811_cs.c | 19 ++++++++----------- 1 file changed, 8 insertions(+), 11 deletions(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c index 5b55c72c710..78cc32e7b01 100644 --- a/drivers/usb/host/sl811_cs.c +++ b/drivers/usb/host/sl811_cs.c @@ -156,19 +156,16 @@ static void sl811_cs_release(struct pcmcia_device * link) } struct sl811_css_cfg { - cistpl_cftable_entry_t dflt; config_info_t conf; }; static int sl811_cs_config_check(struct pcmcia_device *p_dev, cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, void *priv_data) { struct sl811_css_cfg *cfg_mem = priv_data; - if (cfg->flags & CISTPL_CFTABLE_DEFAULT) - memcpy(&cfg_mem->dflt, cfg, sizeof(cistpl_cftable_entry_t)); - if (cfg->index == 0) return -ENODEV; @@ -178,8 +175,8 @@ static int sl811_cs_config_check(struct pcmcia_device *p_dev, if (cfg->vcc.param[CISTPL_POWER_VNOM]/10000 != cfg_mem->conf.Vcc) return -ENODEV; - } else if (cfg_mem->dflt.vcc.present & (1<dflt.vcc.param[CISTPL_POWER_VNOM]/10000 + } else if (dflt->vcc.present & (1<vcc.param[CISTPL_POWER_VNOM]/10000 != cfg_mem->conf.Vcc) return -ENODEV; } @@ -187,18 +184,18 @@ static int sl811_cs_config_check(struct pcmcia_device *p_dev, if (cfg->vpp1.present & (1<conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; - else if (cfg_mem->dflt.vpp1.present & (1<vpp1.present & (1<conf.Vpp = - cfg_mem->dflt.vpp1.param[CISTPL_POWER_VNOM]/10000; + dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; /* we need an interrupt */ - if (cfg->irq.IRQInfo1 || cfg_mem->dflt.irq.IRQInfo1) + if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1) p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; - if ((cfg->io.nwin > 0) || (cfg_mem->dflt.io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &cfg_mem->dflt.io; + if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; -- cgit v1.2.3 From ad913c11928f51abb6174f165db8d8d205b22e21 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Sat, 2 Aug 2008 16:12:00 +0200 Subject: pcmcia: pcmcia_config_loop() improvement by passing vcc By passing the current Vcc setting to the pcmcia_config_loop callback function, we can remove pcmcia_get_configuration_info() calls from many drivers. Signed-off-by: Dominik Brodowski --- drivers/usb/host/sl811_cs.c | 35 +++++++++-------------------------- 1 file changed, 9 insertions(+), 26 deletions(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c index 78cc32e7b01..ca733b7caea 100644 --- a/drivers/usb/host/sl811_cs.c +++ b/drivers/usb/host/sl811_cs.c @@ -155,29 +155,22 @@ static void sl811_cs_release(struct pcmcia_device * link) platform_device_unregister(&platform_dev); } -struct sl811_css_cfg { - config_info_t conf; -}; - static int sl811_cs_config_check(struct pcmcia_device *p_dev, cistpl_cftable_entry_t *cfg, cistpl_cftable_entry_t *dflt, + unsigned int vcc, void *priv_data) { - struct sl811_css_cfg *cfg_mem = priv_data; - if (cfg->index == 0) return -ENODEV; /* Use power settings for Vcc and Vpp if present */ /* Note that the CIS values need to be rescaled */ if (cfg->vcc.present & (1<vcc.param[CISTPL_POWER_VNOM]/10000 != - cfg_mem->conf.Vcc) + if (cfg->vcc.param[CISTPL_POWER_VNOM]/10000 != vcc) return -ENODEV; } else if (dflt->vcc.present & (1<vcc.param[CISTPL_POWER_VNOM]/10000 - != cfg_mem->conf.Vcc) + if (dflt->vcc.param[CISTPL_POWER_VNOM]/10000 != vcc) return -ENODEV; } @@ -214,29 +207,20 @@ static int sl811_cs_config(struct pcmcia_device *link) struct device *parent = &handle_to_dev(link); local_info_t *dev = link->priv; int last_fn, last_ret; - struct sl811_css_cfg *cfg_mem; DBG(0, "sl811_cs_config(0x%p)\n", link); - cfg_mem = kzalloc(sizeof(struct sl811_css_cfg), GFP_KERNEL); - if (!cfg_mem) - return -ENOMEM; - - /* Look up the current Vcc */ - CS_CHECK(GetConfigurationInfo, - pcmcia_get_configuration_info(link, &cfg_mem->conf)); - - if (pcmcia_loop_config(link, sl811_cs_config_check, cfg_mem)) - return -ENODEV; + if (pcmcia_loop_config(link, sl811_cs_config_check, NULL)) + goto failed; /* require an IRQ and two registers */ if (!link->io.NumPorts1 || link->io.NumPorts1 < 2) - goto cs_failed; + goto failed; if (link->conf.Attributes & CONF_ENABLE_IRQ) CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); else - goto cs_failed; + goto failed; CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); @@ -257,13 +241,12 @@ static int sl811_cs_config(struct pcmcia_device *link) if (sl811_hc_init(parent, link->io.BasePort1, link->irq.AssignedIRQ) < 0) { cs_failed: - printk("sl811_cs_config failed\n"); cs_error(link, last_fn, last_ret); +failed: + printk(KERN_WARNING "sl811_cs_config failed\n"); sl811_cs_release(link); - kfree(cfg_mem); return -ENODEV; } - kfree(cfg_mem); return 0; } -- cgit v1.2.3 From d39bd56452b509f8d6054883b8a0129950ba50cc Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Thu, 28 Aug 2008 01:05:34 +0200 Subject: pcmcia: encapsulate ioaddr_t By now, ioaddr_t should only be used by the deprecated ioctl, as it does not correctly reflect the maximum ioport range at least on some architectures. Signed-off-by: Dominik Brodowski --- drivers/usb/host/sl811_cs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c index ca733b7caea..516848dd9b4 100644 --- a/drivers/usb/host/sl811_cs.c +++ b/drivers/usb/host/sl811_cs.c @@ -112,7 +112,8 @@ static struct platform_device platform_dev = { .num_resources = ARRAY_SIZE(resources), }; -static int sl811_hc_init(struct device *parent, ioaddr_t base_addr, int irq) +static int sl811_hc_init(struct device *parent, resource_size_t base_addr, + int irq) { if (platform_dev.dev.parent) return -EBUSY; -- cgit v1.2.3 From d6b52039c95556ade5c4f99592a0dc46473fbf93 Mon Sep 17 00:00:00 2001 From: Vladimir Barinov Date: Mon, 29 Sep 2008 23:14:11 +0400 Subject: ALSA: Correct Vladimir Barinov's e-mail address Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- drivers/usb/host/ehci-ixp4xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/ehci-ixp4xx.c b/drivers/usb/host/ehci-ixp4xx.c index f9575c40912..9c32063a0c2 100644 --- a/drivers/usb/host/ehci-ixp4xx.c +++ b/drivers/usb/host/ehci-ixp4xx.c @@ -1,7 +1,7 @@ /* * IXP4XX EHCI Host Controller Driver * - * Author: Vladimir Barinov + * Author: Vladimir Barinov * * Based on "ehci-fsl.c" by Randy Vinson * -- cgit v1.2.3