From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/usb/serial/ftdi_sio.c | 2496 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 2496 insertions(+) create mode 100644 drivers/usb/serial/ftdi_sio.c (limited to 'drivers/usb/serial/ftdi_sio.c') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c new file mode 100644 index 00000000000..4afd905fe2f --- /dev/null +++ b/drivers/usb/serial/ftdi_sio.c @@ -0,0 +1,2496 @@ +/* + * USB FTDI SIO driver + * + * Copyright (C) 1999 - 2001 + * Greg Kroah-Hartman (greg@kroah.com) + * Bill Ryder (bryder@sgi.com) + * Copyright (C) 2002 + * Kuba Ober (kuba@mareimbrium.org) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * See Documentation/usb/usb-serial.txt for more information on using this driver + * + * See http://ftdi-usb-sio.sourceforge.net for upto date testing info + * and extra documentation + * + * (21/Jul/2004) Ian Abbott + * Incorporated Steven Turner's code to add support for the FT2232C chip. + * The prelimilary port to the 2.6 kernel was by Rus V. Brushkoff. I have + * fixed a couple of things. + * + * (27/May/2004) Ian Abbott + * Improved throttling code, mostly stolen from the WhiteHEAT driver. + * + * (26/Mar/2004) Jan Capek + * Added PID's for ICD-U20/ICD-U40 - incircuit PIC debuggers from CCS Inc. + * + * (09/Feb/2004) Ian Abbott + * Changed full name of USB-UIRT device to avoid "/" character. + * Added FTDI's alternate PID (0x6006) for FT232/245 devices. + * Added PID for "ELV USB Module UO100" from Stefan Frings. + * + * (21/Oct/2003) Ian Abbott + * Renamed some VID/PID macros for Matrix Orbital and Perle Systems + * devices. Removed Matrix Orbital and Perle Systems devices from the + * 8U232AM device table, but left them in the FT232BM table, as they are + * known to use only FT232BM. + * + * (17/Oct/2003) Scott Allen + * Added vid/pid for Perle Systems UltraPort USB serial converters + * + * (21/Sep/2003) Ian Abbott + * Added VID/PID for Omnidirectional Control Technology US101 USB to + * RS-232 adapter (also rebadged as Dick Smith Electronics XH6381). + * VID/PID supplied by Donald Gordon. + * + * (19/Aug/2003) Ian Abbott + * Freed urb's transfer buffer in write bulk callback. + * Omitted some paranoid checks in write bulk callback that don't matter. + * Scheduled work in write bulk callback regardless of port's open count. + * + * (05/Aug/2003) Ian Abbott + * Added VID/PID for ID TECH IDT1221U USB to RS-232 adapter. + * VID/PID provided by Steve Briggs. + * + * (23/Jul/2003) Ian Abbott + * Added PIDs for CrystalFontz 547, 633, 631, 635, 640 and 640 from + * Wayne Wylupski. + * + * (10/Jul/2003) David Glance + * Added PID for DSS-20 SyncStation cradle for Sony-Ericsson P800. + * + * (27/Jun/2003) Ian Abbott + * Reworked the urb handling logic. We have no more pool, but dynamically + * allocate the urb and the transfer buffer on the fly. In testing this + * does not incure any measurable overhead. This also relies on the fact + * that we have proper reference counting logic for urbs. I nicked this + * from Greg KH's Visor driver. + * + * (23/Jun/2003) Ian Abbott + * Reduced flip buffer pushes and corrected a data length test in + * ftdi_read_bulk_callback. + * Defererence pointers after any paranoid checks, not before. + * + * (21/Jun/2003) Erik Nygren + * Added support for Home Electronics Tira-1 IR tranceiver using FT232BM chip. + * See . Only operates properly + * at 100000 and RTS-CTS, so set custom divisor mode on startup. + * Also force the Tira-1 and USB-UIRT to only use their custom baud rates. + * + * (18/Jun/2003) Ian Abbott + * Added Device ID of the USB relais from Rudolf Gugler (backported from + * Philipp Gühring's patch for 2.5.x kernel). + * Moved read transfer buffer reallocation into startup function. + * Free existing write urb and transfer buffer in startup function. + * Only use urbs in write urb pool that were successfully allocated. + * Moved some constant macros out of functions. + * Minor whitespace and comment changes. + * + * (12/Jun/2003) David Norwood + * Added support for USB-UIRT IR tranceiver using 8U232AM chip. + * See . Only + * operates properly at 312500, so set custom divisor mode on startup. + * + * (12/Jun/2003) Ian Abbott + * Added Sealevel SeaLINK+ 210x, 220x, 240x, 280x vid/pids from Tuan Hoang + * - I've eliminated some that don't seem to exist! + * Added Home Electronics Tira-1 IR transceiver pid from Chris Horn + * Some whitespace/coding-style cleanups + * + * (11/Jun/2003) Ian Abbott + * Fixed unsafe spinlock usage in ftdi_write + * + * (24/Feb/2003) Richard Shooter + * Increase read buffer size to improve read speeds at higher baud rates + * (specifically tested with up to 1Mb/sec at 1.5M baud) + * + * (23/Feb/2003) John Wilkins + * Added Xon/xoff flow control (activating support in the ftdi device) + * Added vid/pid for Videonetworks/Homechoice (UK ISP) + * + * (23/Feb/2003) Bill Ryder + * Added matrix orb device vid/pids from Wayne Wylupski + * + * (19/Feb/2003) Ian Abbott + * For TIOCSSERIAL, set alt_speed to 0 when ASYNC_SPD_MASK value has + * changed to something other than ASYNC_SPD_HI, ASYNC_SPD_VHI, + * ASYNC_SPD_SHI or ASYNC_SPD_WARP. Also, unless ASYNC_SPD_CUST is in + * force, don't bother changing baud rate when custom_divisor has changed. + * + * (18/Feb/2003) Ian Abbott + * Fixed TIOCMGET handling to include state of DTR and RTS, the state + * of which are now saved by set_dtr() and set_rts(). + * Fixed improper storage class for buf in set_dtr() and set_rts(). + * Added FT232BM chip type and support for its extra baud rates (compared + * to FT8U232AM). + * Took account of special case divisor values for highest baud rates of + * FT8U232AM and FT232BM. + * For TIOCSSERIAL, forced alt_speed to 0 when ASYNC_SPD_CUST kludge used, + * as previous alt_speed setting is now stale. + * Moved startup code common between the startup routines for the + * different chip types into a common subroutine. + * + * (17/Feb/2003) Bill Ryder + * Added write urb buffer pool on a per device basis + * Added more checking for open file on callbacks (fixed OOPS) + * Added CrystalFontz 632 and 634 PIDs + * (thanx to CrystalFontz for the sample devices - they flushed out + * some driver bugs) + * Minor debugging message changes + * Added throttle, unthrottle and chars_in_buffer functions + * Fixed FTDI_SIO (the original device) bug + * Fixed some shutdown handling + * + * + * + * + * (07/Jun/2002) Kuba Ober + * Changed FTDI_SIO_BASE_BAUD_TO_DIVISOR macro into ftdi_baud_to_divisor + * function. It was getting too complex. + * Fix the divisor calculation logic which was setting divisor of 0.125 + * instead of 0.5 for fractional parts of divisor equal to 5/8, 6/8, 7/8. + * Also make it bump up the divisor to next integer in case of 7/8 - it's + * a better approximation. + * + * (25/Jul/2002) Bill Ryder inserted Dmitri's TIOCMIWAIT patch + * Not tested by me but it doesn't break anything I use. + * + * (04/Jan/2002) Kuba Ober + * Implemented 38400 baudrate kludge, where it can be substituted with other + * values. That's the only way to set custom baudrates. + * Implemented TIOCSSERIAL, TIOCGSERIAL ioctl's so that setserial is happy. + * FIXME: both baudrate things should eventually go to usbserial.c as other + * devices may need that functionality too. Actually, it can probably be + * merged in serial.c somehow - too many drivers repeat this code over + * and over. + * Fixed baudrate forgetfulness - open() used to reset baudrate to 9600 every time. + * Divisors for baudrates are calculated by a macro. + * Small code cleanups. Ugly whitespace changes for Plato's sake only ;-]. + * + * (04/Nov/2001) Bill Ryder + * Fixed bug in read_bulk_callback where incorrect urb buffer was used. + * Cleaned up write offset calculation + * Added write_room since default values can be incorrect for sio + * Changed write_bulk_callback to use same queue_task as other drivers + * (the previous version caused panics) + * Removed port iteration code since the device only has one I/O port and it + * was wrong anyway. + * + * (31/May/2001) gkh + * Switched from using spinlock to a semaphore, which fixes lots of problems. + * + * (23/May/2001) Bill Ryder + * Added runtime debug patch (thanx Tyson D Sawyer). + * Cleaned up comments for 8U232 + * Added parity, framing and overrun error handling + * Added receive break handling. + * + * (04/08/2001) gb + * Identify version on module load. + * + * (18/March/2001) Bill Ryder + * (Not released) + * Added send break handling. (requires kernel patch too) + * Fixed 8U232AM hardware RTS/CTS etc status reporting. + * Added flipbuf fix copied from generic device + * + * (12/3/2000) Bill Ryder + * Added support for 8U232AM device. + * Moved PID and VIDs into header file only. + * Turned on low-latency for the tty (device will do high baudrates) + * Added shutdown routine to close files when device removed. + * More debug and error message cleanups. + * + * (11/13/2000) Bill Ryder + * Added spinlock protected open code and close code. + * Multiple opens work (sort of - see webpage mentioned above). + * Cleaned up comments. Removed multiple PID/VID definitions. + * Factorised cts/dtr code + * Made use of __FUNCTION__ in dbg's + * + * (11/01/2000) Adam J. Richter + * usb_device_id table support + * + * (10/05/2000) gkh + * Fixed bug with urb->dev not being set properly, now that the usb + * core needs it. + * + * (09/11/2000) gkh + * Removed DEBUG #ifdefs with call to usb_serial_debug_data + * + * (07/19/2000) gkh + * Added module_init and module_exit functions to handle the fact that this + * driver is a loadable module now. + * + * (04/04/2000) Bill Ryder + * Fixed bugs in TCGET/TCSET ioctls (by removing them - they are + * handled elsewhere in the tty io driver chain). + * + * (03/30/2000) Bill Ryder + * Implemented lots of ioctls + * Fixed a race condition in write + * Changed some dbg's to errs + * + * (03/26/2000) gkh + * Split driver up into device specific pieces. + * + */ + +/* Bill Ryder - bryder@sgi.com - wrote the FTDI_SIO implementation */ +/* Thanx to FTDI for so kindly providing details of the protocol required */ +/* to talk to the device */ +/* Thanx to gkh and the rest of the usb dev group for all code I have assimilated :-) */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "usb-serial.h" +#include "ftdi_sio.h" + +/* + * Version Information + */ +#define DRIVER_VERSION "v1.4.1" +#define DRIVER_AUTHOR "Greg Kroah-Hartman , Bill Ryder , Kuba Ober " +#define DRIVER_DESC "USB FTDI Serial Converters Driver" + +static int debug; + +static struct usb_device_id id_table_sio [] = { + { USB_DEVICE(FTDI_VID, FTDI_SIO_PID) }, + { } /* Terminating entry */ +}; + +/* + * The 8U232AM has the same API as the sio except for: + * - it can support MUCH higher baudrates; up to: + * o 921600 for RS232 and 2000000 for RS422/485 at 48MHz + * o 230400 at 12MHz + * so .. 8U232AM's baudrate setting codes are different + * - it has a two byte status code. + * - it returns characters every 16ms (the FTDI does it every 40ms) + * + * the bcdDevice value is used to differentiate FT232BM and FT245BM from + * the earlier FT8U232AM and FT8U232BM. For now, include all known VID/PID + * combinations in both tables. + * FIXME: perhaps bcdDevice can also identify 12MHz devices, but I don't know + * if those ever went into mass production. [Ian Abbott] + */ + + +static struct usb_device_id id_table_8U232AM [] = { + { USB_DEVICE_VER(FTDI_VID, FTDI_IRTRANS_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_8U232AM_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_8U232AM_ALT_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_8U232AM_ALT_ALT_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_RELAIS_PID, 0, 0x3ff) }, + { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) }, + { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) }, + { USB_DEVICE_VER(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_XF_632_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_XF_634_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_XF_547_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_XF_633_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_XF_631_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_XF_635_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_XF_640_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_XF_642_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_VNHCPCUSB_D_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_DSS20_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2101_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2102_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2103_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2104_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2201_1_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2201_2_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2202_1_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2202_2_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2203_1_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2203_2_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_1_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_2_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_3_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_4_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_1_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_2_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_3_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_4_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_1_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_2_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_3_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_4_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_1_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_2_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_3_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_4_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_5_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_6_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_7_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_8_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_1_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_2_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_3_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_4_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_5_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_6_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_7_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_8_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_1_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_2_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_3_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_4_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_5_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_6_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_7_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_8_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(IDTECH_VID, IDTECH_IDT1221U_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(OCT_VID, OCT_US101_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_1, 0, 0x3ff) }, + { USB_DEVICE_VER(FTDI_VID, PROTEGO_R2X0, 0, 0x3ff) }, + { USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_3, 0, 0x3ff) }, + { USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_4, 0, 0x3ff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UO100_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(FTDI_VID, INSIDE_ACCESSO, 0, 0x3ff) }, + { USB_DEVICE_VER(INTREPID_VID, INTREPID_VALUECAN_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(INTREPID_VID, INTREPID_NEOVI_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(FALCOM_VID, FALCOM_TWIST_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_SUUNTO_SPORTS_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(FTDI_RM_VID, FTDI_RMCANVIEW_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(BANDB_VID, BANDB_USOTL4_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(BANDB_VID, BANDB_USTL4_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(BANDB_VID, BANDB_USO9ML2_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(FTDI_VID, EVER_ECO_PRO_CDS, 0, 0x3ff) }, + { } /* Terminating entry */ +}; + + +static struct usb_device_id id_table_FT232BM [] = { + { USB_DEVICE_VER(FTDI_VID, FTDI_IRTRANS_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_8U232AM_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_8U232AM_ALT_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_8U232AM_ALT_ALT_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_RELAIS_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_XF_632_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_XF_634_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_XF_547_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_XF_633_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_XF_631_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_XF_635_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_XF_640_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_XF_642_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_VNHCPCUSB_D_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_DSS20_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_0_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_1_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_2_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_3_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_4_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_5_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_6_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_PIEGROUP_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2101_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2102_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2103_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2104_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2201_1_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2201_2_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2202_1_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2202_2_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2203_1_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2203_2_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_1_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_2_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_3_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_4_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_1_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_2_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_3_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_4_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_1_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_2_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_3_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_4_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_1_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_2_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_3_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_4_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_5_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_6_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_7_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_8_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_1_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_2_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_3_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_4_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_5_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_6_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_7_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_8_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_1_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_2_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_3_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_4_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_5_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_6_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_7_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_8_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(IDTECH_VID, IDTECH_IDT1221U_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(OCT_VID, OCT_US101_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_1, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, PROTEGO_R2X0, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_3, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_4, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E808_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E809_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80A_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80B_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80C_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80D_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80E_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80F_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E888_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E889_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88A_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88B_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88C_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88D_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88E_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88F_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UO100_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, LINX_SDMUSBQSS_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, LINX_MASTERDEVEL2_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_0_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_1_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_2_PID, 0x400, 0xffff) }, + { USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) }, + { USB_DEVICE_VER(FTDI_VID, INSIDE_ACCESSO, 0x400, 0xffff) }, + { USB_DEVICE_VER(INTREPID_VID, INTREPID_VALUECAN_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(INTREPID_VID, INTREPID_NEOVI_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FALCOM_VID, FALCOM_TWIST_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_SUUNTO_SPORTS_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_RM_VID, FTDI_RMCANVIEW_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(BANDB_VID, BANDB_USOTL4_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(BANDB_VID, BANDB_USTL4_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(BANDB_VID, BANDB_USO9ML2_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, EVER_ECO_PRO_CDS, 0x400, 0xffff) }, + { } /* Terminating entry */ +}; + + +static struct usb_device_id id_table_USB_UIRT [] = { + { USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID) }, + { } /* Terminating entry */ +}; + + +static struct usb_device_id id_table_HE_TIRA1 [] = { + { USB_DEVICE_VER(FTDI_VID, FTDI_HE_TIRA1_PID, 0x400, 0xffff) }, + { } /* Terminating entry */ +}; + + +static struct usb_device_id id_table_FT2232C[] = { + { USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) }, + { } /* Terminating entry */ +}; + + +static struct usb_device_id id_table_combined [] = { + { USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_SIO_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_ALT_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) }, + { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) }, + { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_XF_547_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_XF_633_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_XF_631_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_XF_635_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_XF_640_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_XF_642_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_DSS20_PID) }, + { USB_DEVICE(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_VNHCPCUSB_D_PID) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_0_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_1_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_2_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_3_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_4_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_5_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_6_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID, 0x400, 0xffff) }, + { USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2101_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2102_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2103_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2104_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2201_1_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2201_2_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2202_1_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2202_2_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2203_1_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2203_2_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_1_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_2_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_3_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_4_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_1_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_2_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_3_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_4_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_1_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_2_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_3_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_4_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_1_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_2_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_3_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_4_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_5_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_6_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_7_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_8_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_1_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_2_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_3_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_4_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_5_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_6_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_7_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_8_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_1_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_2_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_3_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_4_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_5_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_6_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_7_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_8_PID) }, + { USB_DEVICE(IDTECH_VID, IDTECH_IDT1221U_PID) }, + { USB_DEVICE(OCT_VID, OCT_US101_PID) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_HE_TIRA1_PID, 0x400, 0xffff) }, + { USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID) }, + { USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_1) }, + { USB_DEVICE(FTDI_VID, PROTEGO_R2X0) }, + { USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_3) }, + { USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_4) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_UO100_PID) }, + { USB_DEVICE_VER(FTDI_VID, LINX_SDMUSBQSS_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, LINX_MASTERDEVEL2_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_0_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_1_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_2_PID, 0x400, 0xffff) }, + { USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) }, + { USB_DEVICE(FTDI_VID, INSIDE_ACCESSO) }, + { USB_DEVICE(INTREPID_VID, INTREPID_VALUECAN_PID) }, + { USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) }, + { USB_DEVICE(FALCOM_VID, FALCOM_TWIST_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_SUUNTO_SPORTS_PID) }, + { USB_DEVICE(FTDI_RM_VID, FTDI_RMCANVIEW_PID) }, + { USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) }, + { USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) }, + { USB_DEVICE(BANDB_VID, BANDB_USO9ML2_PID) }, + { USB_DEVICE(FTDI_VID, EVER_ECO_PRO_CDS) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE (usb, id_table_combined); + +static struct usb_driver ftdi_driver = { + .name = "ftdi_sio", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = id_table_combined, +}; + +static char *ftdi_chip_name[] = { + [SIO] = "SIO", /* the serial part of FT8U100AX */ + [FT8U232AM] = "FT8U232AM", + [FT232BM] = "FT232BM", + [FT2232C] = "FT2232C", +}; + + +/* Constants for read urb and write urb */ +#define BUFSZ 512 +#define PKTSZ 64 + +/* rx_flags */ +#define THROTTLED 0x01 +#define ACTUALLY_THROTTLED 0x02 + +struct ftdi_private { + ftdi_chip_type_t chip_type; + /* type of the device, either SIO or FT8U232AM */ + int baud_base; /* baud base clock for divisor setting */ + int custom_divisor; /* custom_divisor kludge, this is for baud_base (different from what goes to the chip!) */ + __u16 last_set_data_urb_value ; + /* the last data state set - needed for doing a break */ + int write_offset; /* This is the offset in the usb data block to write the serial data - + * it is different between devices + */ + int flags; /* some ASYNC_xxxx flags are supported */ + unsigned long last_dtr_rts; /* saved modem control outputs */ + wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */ + char prev_status, diff_status; /* Used for TIOCMIWAIT */ + __u8 rx_flags; /* receive state flags (throttling) */ + spinlock_t rx_lock; /* spinlock for receive state */ + + __u16 interface; /* FT2232C port interface (0 for FT232/245) */ + + int force_baud; /* if non-zero, force the baud rate to this value */ + int force_rtscts; /* if non-zero, force RTS-CTS to always be enabled */ +}; + +/* Used for TIOCMIWAIT */ +#define FTDI_STATUS_B0_MASK (FTDI_RS0_CTS | FTDI_RS0_DSR | FTDI_RS0_RI | FTDI_RS0_RLSD) +#define FTDI_STATUS_B1_MASK (FTDI_RS_BI) +/* End TIOCMIWAIT */ + +#define FTDI_IMPL_ASYNC_FLAGS = ( ASYNC_SPD_HI | ASYNC_SPD_VHI \ + ASYNC_SPD_CUST | ASYNC_SPD_SHI | ASYNC_SPD_WARP ) + +/* function prototypes for a FTDI serial converter */ +static int ftdi_SIO_startup (struct usb_serial *serial); +static int ftdi_8U232AM_startup (struct usb_serial *serial); +static int ftdi_FT232BM_startup (struct usb_serial *serial); +static int ftdi_FT2232C_startup (struct usb_serial *serial); +static int ftdi_USB_UIRT_startup (struct usb_serial *serial); +static int ftdi_HE_TIRA1_startup (struct usb_serial *serial); +static void ftdi_shutdown (struct usb_serial *serial); +static int ftdi_open (struct usb_serial_port *port, struct file *filp); +static void ftdi_close (struct usb_serial_port *port, struct file *filp); +static int ftdi_write (struct usb_serial_port *port, const unsigned char *buf, int count); +static int ftdi_write_room (struct usb_serial_port *port); +static int ftdi_chars_in_buffer (struct usb_serial_port *port); +static void ftdi_write_bulk_callback (struct urb *urb, struct pt_regs *regs); +static void ftdi_read_bulk_callback (struct urb *urb, struct pt_regs *regs); +static void ftdi_process_read (struct usb_serial_port *port); +static void ftdi_set_termios (struct usb_serial_port *port, struct termios * old); +static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file); +static int ftdi_tiocmset (struct usb_serial_port *port, struct file * file, unsigned int set, unsigned int clear); +static int ftdi_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg); +static void ftdi_break_ctl (struct usb_serial_port *port, int break_state ); +static void ftdi_throttle (struct usb_serial_port *port); +static void ftdi_unthrottle (struct usb_serial_port *port); + +static unsigned short int ftdi_232am_baud_base_to_divisor (int baud, int base); +static unsigned short int ftdi_232am_baud_to_divisor (int baud); +static __u32 ftdi_232bm_baud_base_to_divisor (int baud, int base); +static __u32 ftdi_232bm_baud_to_divisor (int baud); + +static struct usb_serial_device_type ftdi_SIO_device = { + .owner = THIS_MODULE, + .name = "FTDI SIO", + .id_table = id_table_sio, + .num_interrupt_in = 0, + .num_bulk_in = 1, + .num_bulk_out = 1, + .num_ports = 1, + .open = ftdi_open, + .close = ftdi_close, + .throttle = ftdi_throttle, + .unthrottle = ftdi_unthrottle, + .write = ftdi_write, + .write_room = ftdi_write_room, + .chars_in_buffer = ftdi_chars_in_buffer, + .read_bulk_callback = ftdi_read_bulk_callback, + .write_bulk_callback = ftdi_write_bulk_callback, + .tiocmget = ftdi_tiocmget, + .tiocmset = ftdi_tiocmset, + .ioctl = ftdi_ioctl, + .set_termios = ftdi_set_termios, + .break_ctl = ftdi_break_ctl, + .attach = ftdi_SIO_startup, + .shutdown = ftdi_shutdown, +}; + +static struct usb_serial_device_type ftdi_8U232AM_device = { + .owner = THIS_MODULE, + .name = "FTDI 8U232AM Compatible", + .id_table = id_table_8U232AM, + .num_interrupt_in = 0, + .num_bulk_in = 1, + .num_bulk_out = 1, + .num_ports = 1, + .open = ftdi_open, + .close = ftdi_close, + .throttle = ftdi_throttle, + .unthrottle = ftdi_unthrottle, + .write = ftdi_write, + .write_room = ftdi_write_room, + .chars_in_buffer = ftdi_chars_in_buffer, + .read_bulk_callback = ftdi_read_bulk_callback, + .write_bulk_callback = ftdi_write_bulk_callback, + .tiocmget = ftdi_tiocmget, + .tiocmset = ftdi_tiocmset, + .ioctl = ftdi_ioctl, + .set_termios = ftdi_set_termios, + .break_ctl = ftdi_break_ctl, + .attach = ftdi_8U232AM_startup, + .shutdown = ftdi_shutdown, +}; + +static struct usb_serial_device_type ftdi_FT232BM_device = { + .owner = THIS_MODULE, + .name = "FTDI FT232BM Compatible", + .id_table = id_table_FT232BM, + .num_interrupt_in = 0, + .num_bulk_in = 1, + .num_bulk_out = 1, + .num_ports = 1, + .open = ftdi_open, + .close = ftdi_close, + .throttle = ftdi_throttle, + .unthrottle = ftdi_unthrottle, + .write = ftdi_write, + .write_room = ftdi_write_room, + .chars_in_buffer = ftdi_chars_in_buffer, + .read_bulk_callback = ftdi_read_bulk_callback, + .write_bulk_callback = ftdi_write_bulk_callback, + .tiocmget = ftdi_tiocmget, + .tiocmset = ftdi_tiocmset, + .ioctl = ftdi_ioctl, + .set_termios = ftdi_set_termios, + .break_ctl = ftdi_break_ctl, + .attach = ftdi_FT232BM_startup, + .shutdown = ftdi_shutdown, +}; + +static struct usb_serial_device_type ftdi_FT2232C_device = { + .owner = THIS_MODULE, + .name = "FTDI FT2232C Compatible", + .id_table = id_table_FT2232C, + .num_interrupt_in = 0, + .num_bulk_in = 1, + .num_bulk_out = 1, + .num_ports = 1, + .open = ftdi_open, + .close = ftdi_close, + .throttle = ftdi_throttle, + .unthrottle = ftdi_unthrottle, + .write = ftdi_write, + .write_room = ftdi_write_room, + .chars_in_buffer = ftdi_chars_in_buffer, + .read_bulk_callback = ftdi_read_bulk_callback, + .write_bulk_callback = ftdi_write_bulk_callback, + .tiocmget = ftdi_tiocmget, + .tiocmset = ftdi_tiocmset, + .ioctl = ftdi_ioctl, + .set_termios = ftdi_set_termios, + .break_ctl = ftdi_break_ctl, + .attach = ftdi_FT2232C_startup, + .shutdown = ftdi_shutdown, +}; + +static struct usb_serial_device_type ftdi_USB_UIRT_device = { + .owner = THIS_MODULE, + .name = "USB-UIRT Infrared Tranceiver", + .id_table = id_table_USB_UIRT, + .num_interrupt_in = 0, + .num_bulk_in = 1, + .num_bulk_out = 1, + .num_ports = 1, + .open = ftdi_open, + .close = ftdi_close, + .throttle = ftdi_throttle, + .unthrottle = ftdi_unthrottle, + .write = ftdi_write, + .write_room = ftdi_write_room, + .chars_in_buffer = ftdi_chars_in_buffer, + .read_bulk_callback = ftdi_read_bulk_callback, + .write_bulk_callback = ftdi_write_bulk_callback, + .tiocmget = ftdi_tiocmget, + .tiocmset = ftdi_tiocmset, + .ioctl = ftdi_ioctl, + .set_termios = ftdi_set_termios, + .break_ctl = ftdi_break_ctl, + .attach = ftdi_USB_UIRT_startup, + .shutdown = ftdi_shutdown, +}; + +/* The TIRA1 is based on a FT232BM which requires a fixed baud rate of 100000 + * and which requires RTS-CTS to be enabled. */ +static struct usb_serial_device_type ftdi_HE_TIRA1_device = { + .owner = THIS_MODULE, + .name = "Home-Electronics TIRA-1 IR Transceiver", + .id_table = id_table_HE_TIRA1, + .num_interrupt_in = 0, + .num_bulk_in = 1, + .num_bulk_out = 1, + .num_ports = 1, + .open = ftdi_open, + .close = ftdi_close, + .throttle = ftdi_throttle, + .unthrottle = ftdi_unthrottle, + .write = ftdi_write, + .write_room = ftdi_write_room, + .chars_in_buffer = ftdi_chars_in_buffer, + .read_bulk_callback = ftdi_read_bulk_callback, + .write_bulk_callback = ftdi_write_bulk_callback, + .tiocmget = ftdi_tiocmget, + .tiocmset = ftdi_tiocmset, + .ioctl = ftdi_ioctl, + .set_termios = ftdi_set_termios, + .break_ctl = ftdi_break_ctl, + .attach = ftdi_HE_TIRA1_startup, + .shutdown = ftdi_shutdown, +}; + + + +#define WDR_TIMEOUT 5000 /* default urb timeout */ + +/* High and low are for DTR, RTS etc etc */ +#define HIGH 1 +#define LOW 0 + +/* + * *************************************************************************** + * Utlity functions + * *************************************************************************** + */ + +static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base) +{ + unsigned short int divisor; + int divisor3 = base / 2 / baud; // divisor shifted 3 bits to the left + if ((divisor3 & 0x7) == 7) divisor3 ++; // round x.7/8 up to x+1 + divisor = divisor3 >> 3; + divisor3 &= 0x7; + if (divisor3 == 1) divisor |= 0xc000; else // 0.125 + if (divisor3 >= 4) divisor |= 0x4000; else // 0.5 + if (divisor3 != 0) divisor |= 0x8000; // 0.25 + if (divisor == 1) divisor = 0; /* special case for maximum baud rate */ + return divisor; +} + +static unsigned short int ftdi_232am_baud_to_divisor(int baud) +{ + return(ftdi_232am_baud_base_to_divisor(baud, 48000000)); +} + +static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base) +{ + static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 }; + __u32 divisor; + int divisor3 = base / 2 / baud; // divisor shifted 3 bits to the left + divisor = divisor3 >> 3; + divisor |= (__u32)divfrac[divisor3 & 0x7] << 14; + /* Deal with special cases for highest baud rates. */ + if (divisor == 1) divisor = 0; else // 1.0 + if (divisor == 0x4001) divisor = 1; // 1.5 + return divisor; +} + +static __u32 ftdi_232bm_baud_to_divisor(int baud) +{ + return(ftdi_232bm_baud_base_to_divisor(baud, 48000000)); +} + +static int set_rts(struct usb_serial_port *port, int high_or_low) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + char *buf; + unsigned ftdi_high_or_low; + int rv; + + buf = kmalloc(1, GFP_NOIO); + if (!buf) + return -ENOMEM; + + if (high_or_low) { + ftdi_high_or_low = FTDI_SIO_SET_RTS_HIGH; + priv->last_dtr_rts |= TIOCM_RTS; + } else { + ftdi_high_or_low = FTDI_SIO_SET_RTS_LOW; + priv->last_dtr_rts &= ~TIOCM_RTS; + } + rv = usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + FTDI_SIO_SET_MODEM_CTRL_REQUEST, + FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE, + ftdi_high_or_low, priv->interface, + buf, 0, WDR_TIMEOUT); + + kfree(buf); + return rv; +} + + +static int set_dtr(struct usb_serial_port *port, int high_or_low) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + char *buf; + unsigned ftdi_high_or_low; + int rv; + + buf = kmalloc(1, GFP_NOIO); + if (!buf) + return -ENOMEM; + + if (high_or_low) { + ftdi_high_or_low = FTDI_SIO_SET_DTR_HIGH; + priv->last_dtr_rts |= TIOCM_DTR; + } else { + ftdi_high_or_low = FTDI_SIO_SET_DTR_LOW; + priv->last_dtr_rts &= ~TIOCM_DTR; + } + rv = usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + FTDI_SIO_SET_MODEM_CTRL_REQUEST, + FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE, + ftdi_high_or_low, priv->interface, + buf, 0, WDR_TIMEOUT); + + kfree(buf); + return rv; +} + + +static __u32 get_ftdi_divisor(struct usb_serial_port * port); + + +static int change_speed(struct usb_serial_port *port) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + char *buf; + __u16 urb_value; + __u16 urb_index; + __u32 urb_index_value; + int rv; + + buf = kmalloc(1, GFP_NOIO); + if (!buf) + return -ENOMEM; + + urb_index_value = get_ftdi_divisor(port); + urb_value = (__u16)urb_index_value; + urb_index = (__u16)(urb_index_value >> 16); + if (priv->interface) { /* FT2232C */ + urb_index = (__u16)((urb_index << 8) | priv->interface); + } + + rv = usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + FTDI_SIO_SET_BAUDRATE_REQUEST, + FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE, + urb_value, urb_index, + buf, 0, 100); + + kfree(buf); + return rv; +} + + +static __u32 get_ftdi_divisor(struct usb_serial_port * port) +{ /* get_ftdi_divisor */ + struct ftdi_private *priv = usb_get_serial_port_data(port); + __u32 div_value = 0; + int div_okay = 1; + int baud; + + /* + * The logic involved in setting the baudrate can be cleanly split in 3 steps. + * Obtaining the actual baud rate is a little tricky since unix traditionally + * somehow ignored the possibility to set non-standard baud rates. + * 1. Standard baud rates are set in tty->termios->c_cflag + * 2. If these are not enough, you can set any speed using alt_speed as follows: + * - set tty->termios->c_cflag speed to B38400 + * - set your real speed in tty->alt_speed; it gets ignored when + * alt_speed==0, (or) + * - call TIOCSSERIAL ioctl with (struct serial_struct) set as follows: + * flags & ASYNC_SPD_MASK == ASYNC_SPD_[HI, VHI, SHI, WARP], this just + * sets alt_speed to (HI: 57600, VHI: 115200, SHI: 230400, WARP: 460800) + * ** Steps 1, 2 are done courtesy of tty_get_baud_rate + * 3. You can also set baud rate by setting custom divisor as follows + * - set tty->termios->c_cflag speed to B38400 + * - call TIOCSSERIAL ioctl with (struct serial_struct) set as follows: + * o flags & ASYNC_SPD_MASK == ASYNC_SPD_CUST + * o custom_divisor set to baud_base / your_new_baudrate + * ** Step 3 is done courtesy of code borrowed from serial.c - I should really + * spend some time and separate+move this common code to serial.c, it is + * replicated in nearly every serial driver you see. + */ + + /* 1. Get the baud rate from the tty settings, this observes alt_speed hack */ + + baud = tty_get_baud_rate(port->tty); + dbg("%s - tty_get_baud_rate reports speed %d", __FUNCTION__, baud); + + /* 2. Observe async-compatible custom_divisor hack, update baudrate if needed */ + + if (baud == 38400 && + ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) && + (priv->custom_divisor)) { + baud = priv->baud_base / priv->custom_divisor; + dbg("%s - custom divisor %d sets baud rate to %d", __FUNCTION__, priv->custom_divisor, baud); + } + + /* 3. Convert baudrate to device-specific divisor */ + + if (!baud) baud = 9600; + switch(priv->chip_type) { + case SIO: /* SIO chip */ + switch(baud) { + case 300: div_value = ftdi_sio_b300; break; + case 600: div_value = ftdi_sio_b600; break; + case 1200: div_value = ftdi_sio_b1200; break; + case 2400: div_value = ftdi_sio_b2400; break; + case 4800: div_value = ftdi_sio_b4800; break; + case 9600: div_value = ftdi_sio_b9600; break; + case 19200: div_value = ftdi_sio_b19200; break; + case 38400: div_value = ftdi_sio_b38400; break; + case 57600: div_value = ftdi_sio_b57600; break; + case 115200: div_value = ftdi_sio_b115200; break; + } /* baud */ + if (div_value == 0) { + dbg("%s - Baudrate (%d) requested is not supported", __FUNCTION__, baud); + div_value = ftdi_sio_b9600; + div_okay = 0; + } + break; + case FT8U232AM: /* 8U232AM chip */ + if (baud <= 3000000) { + div_value = ftdi_232am_baud_to_divisor(baud); + } else { + dbg("%s - Baud rate too high!", __FUNCTION__); + div_value = ftdi_232am_baud_to_divisor(9600); + div_okay = 0; + } + break; + case FT232BM: /* FT232BM chip */ + case FT2232C: /* FT2232C chip */ + if (baud <= 3000000) { + div_value = ftdi_232bm_baud_to_divisor(baud); + } else { + dbg("%s - Baud rate too high!", __FUNCTION__); + div_value = ftdi_232bm_baud_to_divisor(9600); + div_okay = 0; + } + break; + } /* priv->chip_type */ + + if (div_okay) { + dbg("%s - Baud rate set to %d (divisor 0x%lX) on chip %s", + __FUNCTION__, baud, (unsigned long)div_value, + ftdi_chip_name[priv->chip_type]); + } + + return(div_value); +} + + +static int get_serial_info(struct usb_serial_port * port, struct serial_struct __user * retinfo) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + struct serial_struct tmp; + + if (!retinfo) + return -EFAULT; + memset(&tmp, 0, sizeof(tmp)); + tmp.flags = priv->flags; + tmp.baud_base = priv->baud_base; + tmp.custom_divisor = priv->custom_divisor; + if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) + return -EFAULT; + return 0; +} /* get_serial_info */ + + +static int set_serial_info(struct usb_serial_port * port, struct serial_struct __user * newinfo) +{ /* set_serial_info */ + struct ftdi_private *priv = usb_get_serial_port_data(port); + struct serial_struct new_serial; + struct ftdi_private old_priv; + + if (copy_from_user(&new_serial, newinfo, sizeof(new_serial))) + return -EFAULT; + old_priv = * priv; + + /* Do error checking and permission checking */ + + if (!capable(CAP_SYS_ADMIN)) { + if (((new_serial.flags & ~ASYNC_USR_MASK) != + (priv->flags & ~ASYNC_USR_MASK))) + return -EPERM; + priv->flags = ((priv->flags & ~ASYNC_USR_MASK) | + (new_serial.flags & ASYNC_USR_MASK)); + priv->custom_divisor = new_serial.custom_divisor; + goto check_and_exit; + } + + if ((new_serial.baud_base != priv->baud_base) && + (new_serial.baud_base < 9600)) + return -EINVAL; + + /* Make the changes - these are privileged changes! */ + + priv->flags = ((priv->flags & ~ASYNC_FLAGS) | + (new_serial.flags & ASYNC_FLAGS)); + priv->custom_divisor = new_serial.custom_divisor; + + port->tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + +check_and_exit: + if ((old_priv.flags & ASYNC_SPD_MASK) != + (priv->flags & ASYNC_SPD_MASK)) { + if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) + port->tty->alt_speed = 57600; + else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) + port->tty->alt_speed = 115200; + else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) + port->tty->alt_speed = 230400; + else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) + port->tty->alt_speed = 460800; + else + port->tty->alt_speed = 0; + } + if (((old_priv.flags & ASYNC_SPD_MASK) != + (priv->flags & ASYNC_SPD_MASK)) || + (((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) && + (old_priv.custom_divisor != priv->custom_divisor))) { + change_speed(port); + } + + return (0); + +} /* set_serial_info */ + + +/* + * *************************************************************************** + * Sysfs Attribute + * *************************************************************************** + */ + +static ssize_t show_latency_timer(struct device *dev, char *buf) +{ + struct usb_serial_port *port = to_usb_serial_port(dev); + struct ftdi_private *priv = usb_get_serial_port_data(port); + struct usb_device *udev; + unsigned short latency = 0; + int rv = 0; + + udev = to_usb_device(dev); + + dbg("%s",__FUNCTION__); + + rv = usb_control_msg(udev, + usb_rcvctrlpipe(udev, 0), + FTDI_SIO_GET_LATENCY_TIMER_REQUEST, + FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE, + 0, priv->interface, + (char*) &latency, 1, WDR_TIMEOUT); + + if (rv < 0) { + dev_err(dev, "Unable to read latency timer: %i", rv); + return -EIO; + } + return sprintf(buf, "%i\n", latency); +} + +/* Write a new value of the latency timer, in units of milliseconds. */ +static ssize_t store_latency_timer(struct device *dev, const char *valbuf, + size_t count) +{ + struct usb_serial_port *port = to_usb_serial_port(dev); + struct ftdi_private *priv = usb_get_serial_port_data(port); + struct usb_device *udev; + char buf[1]; + int v = simple_strtoul(valbuf, NULL, 10); + int rv = 0; + + udev = to_usb_device(dev); + + dbg("%s: setting latency timer = %i", __FUNCTION__, v); + + rv = usb_control_msg(udev, + usb_sndctrlpipe(udev, 0), + FTDI_SIO_SET_LATENCY_TIMER_REQUEST, + FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE, + v, priv->interface, + buf, 0, WDR_TIMEOUT); + + if (rv < 0) { + dev_err(dev, "Unable to write latency timer: %i", rv); + return -EIO; + } + + return count; +} + +/* Write an event character directly to the FTDI register. The ASCII + value is in the low 8 bits, with the enable bit in the 9th bit. */ +static ssize_t store_event_char(struct device *dev, const char *valbuf, + size_t count) +{ + struct usb_serial_port *port = to_usb_serial_port(dev); + struct ftdi_private *priv = usb_get_serial_port_data(port); + struct usb_device *udev; + char buf[1]; + int v = simple_strtoul(valbuf, NULL, 10); + int rv = 0; + + udev = to_usb_device(dev); + + dbg("%s: setting event char = %i", __FUNCTION__, v); + + rv = usb_control_msg(udev, + usb_sndctrlpipe(udev, 0), + FTDI_SIO_SET_EVENT_CHAR_REQUEST, + FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE, + v, priv->interface, + buf, 0, WDR_TIMEOUT); + + if (rv < 0) { + dbg("Unable to write event character: %i", rv); + return -EIO; + } + + return count; +} + +static DEVICE_ATTR(latency_timer, S_IWUSR | S_IRUGO, show_latency_timer, store_latency_timer); +static DEVICE_ATTR(event_char, S_IWUSR, NULL, store_event_char); + +static void create_sysfs_attrs(struct usb_serial *serial) +{ + struct ftdi_private *priv; + struct usb_device *udev; + + dbg("%s",__FUNCTION__); + + priv = usb_get_serial_port_data(serial->port[0]); + udev = serial->dev; + + /* XXX I've no idea if the original SIO supports the event_char + * sysfs parameter, so I'm playing it safe. */ + if (priv->chip_type != SIO) { + dbg("sysfs attributes for %s", ftdi_chip_name[priv->chip_type]); + device_create_file(&udev->dev, &dev_attr_event_char); + if (priv->chip_type == FT232BM || priv->chip_type == FT2232C) { + device_create_file(&udev->dev, &dev_attr_latency_timer); + } + } +} + +static void remove_sysfs_attrs(struct usb_serial *serial) +{ + struct ftdi_private *priv; + struct usb_device *udev; + + dbg("%s",__FUNCTION__); + + priv = usb_get_serial_port_data(serial->port[0]); + udev = serial->dev; + + /* XXX see create_sysfs_attrs */ + if (priv->chip_type != SIO) { + device_remove_file(&udev->dev, &dev_attr_event_char); + if (priv->chip_type == FT232BM || priv->chip_type == FT2232C) { + device_remove_file(&udev->dev, &dev_attr_latency_timer); + } + } + +} + +/* + * *************************************************************************** + * FTDI driver specific functions + * *************************************************************************** + */ + +/* Common startup subroutine */ +/* Called from ftdi_SIO_startup, etc. */ +static int ftdi_common_startup (struct usb_serial *serial) +{ + struct usb_serial_port *port = serial->port[0]; + struct ftdi_private *priv; + + dbg("%s",__FUNCTION__); + + priv = kmalloc(sizeof(struct ftdi_private), GFP_KERNEL); + if (!priv){ + err("%s- kmalloc(%Zd) failed.", __FUNCTION__, sizeof(struct ftdi_private)); + return -ENOMEM; + } + memset(priv, 0, sizeof(*priv)); + + spin_lock_init(&priv->rx_lock); + init_waitqueue_head(&priv->delta_msr_wait); + /* This will push the characters through immediately rather + than queue a task to deliver them */ + priv->flags = ASYNC_LOW_LATENCY; + + /* Increase the size of read buffers */ + if (port->bulk_in_buffer) { + kfree (port->bulk_in_buffer); + } + port->bulk_in_buffer = kmalloc (BUFSZ, GFP_KERNEL); + if (!port->bulk_in_buffer) { + kfree (priv); + return -ENOMEM; + } + if (port->read_urb) { + port->read_urb->transfer_buffer = port->bulk_in_buffer; + port->read_urb->transfer_buffer_length = BUFSZ; + } + + /* Free port's existing write urb and transfer buffer. */ + if (port->write_urb) { + usb_free_urb (port->write_urb); + port->write_urb = NULL; + } + if (port->bulk_out_buffer) { + kfree (port->bulk_out_buffer); + port->bulk_out_buffer = NULL; + } + + usb_set_serial_port_data(serial->port[0], priv); + + return (0); +} + + +/* Startup for the SIO chip */ +/* Called from usbserial:serial_probe */ +static int ftdi_SIO_startup (struct usb_serial *serial) +{ + struct ftdi_private *priv; + int err; + + dbg("%s",__FUNCTION__); + + err = ftdi_common_startup(serial); + if (err){ + return (err); + } + + priv = usb_get_serial_port_data(serial->port[0]); + priv->chip_type = SIO; + priv->baud_base = 12000000 / 16; + priv->write_offset = 1; + + return (0); +} + +/* Startup for the 8U232AM chip */ +/* Called from usbserial:serial_probe */ +static int ftdi_8U232AM_startup (struct usb_serial *serial) +{ /* ftdi_8U232AM_startup */ + struct ftdi_private *priv; + int err; + + dbg("%s",__FUNCTION__); + err = ftdi_common_startup(serial); + if (err){ + return (err); + } + + priv = usb_get_serial_port_data(serial->port[0]); + priv->chip_type = FT8U232AM; + priv->baud_base = 48000000 / 2; /* Would be / 16, but FTDI supports 0.125, 0.25 and 0.5 divisor fractions! */ + + create_sysfs_attrs(serial); + + return (0); +} /* ftdi_8U232AM_startup */ + +/* Startup for the FT232BM chip */ +/* Called from usbserial:serial_probe */ +static int ftdi_FT232BM_startup (struct usb_serial *serial) +{ /* ftdi_FT232BM_startup */ + struct ftdi_private *priv; + int err; + + dbg("%s",__FUNCTION__); + err = ftdi_common_startup(serial); + if (err){ + return (err); + } + + priv = usb_get_serial_port_data(serial->port[0]); + priv->chip_type = FT232BM; + priv->baud_base = 48000000 / 2; /* Would be / 16, but FT232BM supports multiple of 0.125 divisor fractions! */ + + create_sysfs_attrs(serial); + + return (0); +} /* ftdi_FT232BM_startup */ + +/* Startup for the FT2232C chip */ +/* Called from usbserial:serial_probe */ +static int ftdi_FT2232C_startup (struct usb_serial *serial) +{ /* ftdi_FT2232C_startup */ + struct ftdi_private *priv; + int err; + int inter; + + dbg("%s",__FUNCTION__); + err = ftdi_common_startup(serial); + if (err){ + return (err); + } + + priv = usb_get_serial_port_data(serial->port[0]); + priv->chip_type = FT2232C; + inter = serial->interface->altsetting->desc.bInterfaceNumber; + + if (inter) { + priv->interface = INTERFACE_B; + } + else { + priv->interface = INTERFACE_A; + } + priv->baud_base = 48000000 / 2; /* Would be / 16, but FT2232C supports multiple of 0.125 divisor fractions! */ + + create_sysfs_attrs(serial); + + return (0); +} /* ftdi_FT2232C_startup */ + +/* Startup for the USB-UIRT device, which requires hardwired baudrate (38400 gets mapped to 312500) */ +/* Called from usbserial:serial_probe */ +static int ftdi_USB_UIRT_startup (struct usb_serial *serial) +{ /* ftdi_USB_UIRT_startup */ + struct ftdi_private *priv; + int err; + + dbg("%s",__FUNCTION__); + err = ftdi_8U232AM_startup(serial); + if (err){ + return (err); + } + + priv = usb_get_serial_port_data(serial->port[0]); + priv->flags |= ASYNC_SPD_CUST; + priv->custom_divisor = 77; + priv->force_baud = B38400; + + return (0); +} /* ftdi_USB_UIRT_startup */ + +/* Startup for the HE-TIRA1 device, which requires hardwired + * baudrate (38400 gets mapped to 100000) */ +static int ftdi_HE_TIRA1_startup (struct usb_serial *serial) +{ /* ftdi_HE_TIRA1_startup */ + struct ftdi_private *priv; + int err; + + dbg("%s",__FUNCTION__); + err = ftdi_FT232BM_startup(serial); + if (err){ + return (err); + } + + priv = usb_get_serial_port_data(serial->port[0]); + priv->flags |= ASYNC_SPD_CUST; + priv->custom_divisor = 240; + priv->force_baud = B38400; + priv->force_rtscts = 1; + + return (0); +} /* ftdi_HE_TIRA1_startup */ + + +/* ftdi_shutdown is called from usbserial:usb_serial_disconnect + * it is called when the usb device is disconnected + * + * usbserial:usb_serial_disconnect + * calls __serial_close for each open of the port + * shutdown is called then (ie ftdi_shutdown) + */ + + +static void ftdi_shutdown (struct usb_serial *serial) +{ /* ftdi_shutdown */ + + struct usb_serial_port *port = serial->port[0]; + struct ftdi_private *priv = usb_get_serial_port_data(port); + + dbg("%s", __FUNCTION__); + + remove_sysfs_attrs(serial); + + /* all open ports are closed at this point + * (by usbserial.c:__serial_close, which calls ftdi_close) + */ + + if (priv) { + usb_set_serial_port_data(port, NULL); + kfree(priv); + } +} /* ftdi_shutdown */ + + +static int ftdi_open (struct usb_serial_port *port, struct file *filp) +{ /* ftdi_open */ + struct termios tmp_termios; + struct usb_device *dev = port->serial->dev; + struct ftdi_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + + int result = 0; + char buf[1]; /* Needed for the usb_control_msg I think */ + + dbg("%s", __FUNCTION__); + + + port->tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + + /* No error checking for this (will get errors later anyway) */ + /* See ftdi_sio.h for description of what is reset */ + usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + FTDI_SIO_RESET_REQUEST, FTDI_SIO_RESET_REQUEST_TYPE, + FTDI_SIO_RESET_SIO, + priv->interface, buf, 0, WDR_TIMEOUT); + + /* Termios defaults are set by usb_serial_init. We don't change + port->tty->termios - this would loose speed settings, etc. + This is same behaviour as serial.c/rs_open() - Kuba */ + + /* ftdi_set_termios will send usb control messages */ + ftdi_set_termios(port, &tmp_termios); + + /* FIXME: Flow control might be enabled, so it should be checked - + we have no control of defaults! */ + /* Turn on RTS and DTR since we are not flow controlling by default */ + if (set_dtr(port, HIGH) < 0) { + err("%s Error from DTR HIGH urb", __FUNCTION__); + } + if (set_rts(port, HIGH) < 0){ + err("%s Error from RTS HIGH urb", __FUNCTION__); + } + + /* Not throttled */ + spin_lock_irqsave(&priv->rx_lock, flags); + priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED); + spin_unlock_irqrestore(&priv->rx_lock, flags); + + /* Start reading from the device */ + usb_fill_bulk_urb(port->read_urb, dev, + usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress), + port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length, + ftdi_read_bulk_callback, port); + result = usb_submit_urb(port->read_urb, GFP_KERNEL); + if (result) + err("%s - failed submitting read urb, error %d", __FUNCTION__, result); + + + return result; +} /* ftdi_open */ + + + +/* + * usbserial:__serial_close only calls ftdi_close if the point is open + * + * This only gets called when it is the last close + * + * + */ + +static void ftdi_close (struct usb_serial_port *port, struct file *filp) +{ /* ftdi_close */ + unsigned int c_cflag = port->tty->termios->c_cflag; + struct ftdi_private *priv = usb_get_serial_port_data(port); + char buf[1]; + + dbg("%s", __FUNCTION__); + + if (c_cflag & HUPCL){ + /* Disable flow control */ + if (usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + FTDI_SIO_SET_FLOW_CTRL_REQUEST, + FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, + 0, priv->interface, buf, 0, + WDR_TIMEOUT) < 0) { + err("error from flowcontrol urb"); + } + + /* drop DTR */ + if (set_dtr(port, LOW) < 0){ + err("Error from DTR LOW urb"); + } + /* drop RTS */ + if (set_rts(port, LOW) < 0) { + err("Error from RTS LOW urb"); + } + } /* Note change no line if hupcl is off */ + + /* shutdown our bulk read */ + if (port->read_urb) + usb_kill_urb(port->read_urb); +} /* ftdi_close */ + + + +/* The SIO requires the first byte to have: + * B0 1 + * B1 0 + * B2..7 length of message excluding byte 0 + * + * The new devices do not require this byte + */ +static int ftdi_write (struct usb_serial_port *port, + const unsigned char *buf, int count) +{ /* ftdi_write */ + struct ftdi_private *priv = usb_get_serial_port_data(port); + struct urb *urb; + unsigned char *buffer; + int data_offset ; /* will be 1 for the SIO and 0 otherwise */ + int status; + int transfer_size; + + dbg("%s port %d, %d bytes", __FUNCTION__, port->number, count); + + if (count == 0) { + dbg("write request of 0 bytes"); + return 0; + } + + data_offset = priv->write_offset; + dbg("data_offset set to %d",data_offset); + + /* Determine total transfer size */ + transfer_size = count; + if (data_offset > 0) { + /* Original sio needs control bytes too... */ + transfer_size += (data_offset * + ((count + (PKTSZ - 1 - data_offset)) / + (PKTSZ - data_offset))); + } + + buffer = kmalloc (transfer_size, GFP_ATOMIC); + if (!buffer) { + err("%s ran out of kernel memory for urb ...", __FUNCTION__); + return -ENOMEM; + } + + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!urb) { + err("%s - no more free urbs", __FUNCTION__); + kfree (buffer); + return -ENOMEM; + } + + /* Copy data */ + if (data_offset > 0) { + /* Original sio requires control byte at start of each packet. */ + int user_pktsz = PKTSZ - data_offset; + int todo = count; + unsigned char *first_byte = buffer; + const unsigned char *current_position = buf; + + while (todo > 0) { + if (user_pktsz > todo) { + user_pktsz = todo; + } + /* Write the control byte at the front of the packet*/ + *first_byte = 1 | ((user_pktsz) << 2); + /* Copy data for packet */ + memcpy (first_byte + data_offset, + current_position, user_pktsz); + first_byte += user_pktsz + data_offset; + current_position += user_pktsz; + todo -= user_pktsz; + } + } else { + /* No control byte required. */ + /* Copy in the data to send */ + memcpy (buffer, buf, count); + } + + usb_serial_debug_data(debug, &port->dev, __FUNCTION__, transfer_size, buffer); + + /* fill the buffer and send it */ + usb_fill_bulk_urb(urb, port->serial->dev, + usb_sndbulkpipe(port->serial->dev, port->bulk_out_endpointAddress), + buffer, transfer_size, + ftdi_write_bulk_callback, port); + + status = usb_submit_urb(urb, GFP_ATOMIC); + if (status) { + err("%s - failed submitting write urb, error %d", __FUNCTION__, status); + count = status; + kfree (buffer); + } + + /* we are done with this urb, so let the host driver + * really free it when it is finished with it */ + usb_free_urb (urb); + + dbg("%s write returning: %d", __FUNCTION__, count); + return count; +} /* ftdi_write */ + + +/* This function may get called when the device is closed */ + +static void ftdi_write_bulk_callback (struct urb *urb, struct pt_regs *regs) +{ + struct usb_serial_port *port = (struct usb_serial_port *)urb->context; + + /* free up the transfer buffer, as usb_free_urb() does not do this */ + kfree (urb->transfer_buffer); + + dbg("%s - port %d", __FUNCTION__, port->number); + + if (urb->status) { + dbg("nonzero write bulk status received: %d", urb->status); + return; + } + + schedule_work(&port->work); +} /* ftdi_write_bulk_callback */ + + +static int ftdi_write_room( struct usb_serial_port *port ) +{ + dbg("%s - port %d", __FUNCTION__, port->number); + + /* + * We really can take anything the user throws at us + * but let's pick a nice big number to tell the tty + * layer that we have lots of free space + */ + return 2048; +} /* ftdi_write_room */ + + +static int ftdi_chars_in_buffer (struct usb_serial_port *port) +{ /* ftdi_chars_in_buffer */ + dbg("%s - port %d", __FUNCTION__, port->number); + + /* + * We can't really account for how much data we + * have sent out, but hasn't made it through to the + * device, so just tell the tty layer that everything + * is flushed. + */ + return 0; +} /* ftdi_chars_in_buffer */ + + + +static void ftdi_read_bulk_callback (struct urb *urb, struct pt_regs *regs) +{ /* ftdi_read_bulk_callback */ + struct usb_serial_port *port = (struct usb_serial_port *)urb->context; + struct tty_struct *tty; + struct ftdi_private *priv; + + if (urb->number_of_packets > 0) { + err("%s transfer_buffer_length %d actual_length %d number of packets %d",__FUNCTION__, + urb->transfer_buffer_length, urb->actual_length, urb->number_of_packets ); + err("%s transfer_flags %x ", __FUNCTION__,urb->transfer_flags ); + } + + dbg("%s - port %d", __FUNCTION__, port->number); + + if (port->open_count <= 0) + return; + + tty = port->tty; + if (!tty) { + dbg("%s - bad tty pointer - exiting",__FUNCTION__); + return; + } + + priv = usb_get_serial_port_data(port); + if (!priv) { + dbg("%s - bad port private data pointer - exiting", __FUNCTION__); + return; + } + + if (urb != port->read_urb) { + err("%s - Not my urb!", __FUNCTION__); + } + + if (urb->status) { + /* This will happen at close every time so it is a dbg not an err */ + dbg("(this is ok on close) nonzero read bulk status received: %d", urb->status); + return; + } + + /* If throttled, delay receive processing until unthrottled. */ + spin_lock(&priv->rx_lock); + if (priv->rx_flags & THROTTLED) { + dbg("Deferring read urb processing until unthrottled"); + priv->rx_flags |= ACTUALLY_THROTTLED; + spin_unlock(&priv->rx_lock); + return; + } + spin_unlock(&priv->rx_lock); + + ftdi_process_read(port); + +} /* ftdi_read_bulk_callback */ + + +static void ftdi_process_read (struct usb_serial_port *port) +{ /* ftdi_process_read */ + struct urb *urb; + struct tty_struct *tty; + struct ftdi_private *priv; + char error_flag; + unsigned char *data; + + int i; + int result; + int need_flip; + int packet_offset; + + dbg("%s - port %d", __FUNCTION__, port->number); + + if (port->open_count <= 0) + return; + + tty = port->tty; + if (!tty) { + dbg("%s - bad tty pointer - exiting",__FUNCTION__); + return; + } + + priv = usb_get_serial_port_data(port); + if (!priv) { + dbg("%s - bad port private data pointer - exiting", __FUNCTION__); + return; + } + + urb = port->read_urb; + if (!urb) { + dbg("%s - bad read_urb pointer - exiting", __FUNCTION__); + return; + } + + data = urb->transfer_buffer; + + /* The first two bytes of every read packet are status */ + if (urb->actual_length > 2) { + usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data); + } else { + dbg("Status only: %03oo %03oo",data[0],data[1]); + } + + + /* TO DO -- check for hung up line and handle appropriately: */ + /* send hangup */ + /* See acm.c - you do a tty_hangup - eg tty_hangup(tty) */ + /* if CD is dropped and the line is not CLOCAL then we should hangup */ + + need_flip = 0; + for (packet_offset=0; packet_offset < urb->actual_length; packet_offset += PKTSZ) { + /* Compare new line status to the old one, signal if different */ + if (priv != NULL) { + char new_status = data[packet_offset+0] & FTDI_STATUS_B0_MASK; + if (new_status != priv->prev_status) { + priv->diff_status |= new_status ^ priv->prev_status; + wake_up_interruptible(&priv->delta_msr_wait); + priv->prev_status = new_status; + } + } + + /* Handle errors and break */ + error_flag = TTY_NORMAL; + /* Although the device uses a bitmask and hence can have multiple */ + /* errors on a packet - the order here sets the priority the */ + /* error is returned to the tty layer */ + + if ( data[packet_offset+1] & FTDI_RS_OE ) { + error_flag = TTY_OVERRUN; + dbg("OVERRRUN error"); + } + if ( data[packet_offset+1] & FTDI_RS_BI ) { + error_flag = TTY_BREAK; + dbg("BREAK received"); + } + if ( data[packet_offset+1] & FTDI_RS_PE ) { + error_flag = TTY_PARITY; + dbg("PARITY error"); + } + if ( data[packet_offset+1] & FTDI_RS_FE ) { + error_flag = TTY_FRAME; + dbg("FRAMING error"); + } + if (urb->actual_length > packet_offset + 2) { + for (i = 2; (i < PKTSZ) && ((i+packet_offset) < urb->actual_length); ++i) { + /* have to make sure we don't overflow the buffer + with tty_insert_flip_char's */ + if(tty->flip.count >= TTY_FLIPBUF_SIZE) { + tty_flip_buffer_push(tty); + } + /* Note that the error flag is duplicated for + every character received since we don't know + which character it applied to */ + tty_insert_flip_char(tty, data[packet_offset+i], error_flag); + } + need_flip = 1; + } + +#ifdef NOT_CORRECT_BUT_KEEPING_IT_FOR_NOW + /* if a parity error is detected you get status packets forever + until a character is sent without a parity error. + This doesn't work well since the application receives a never + ending stream of bad data - even though new data hasn't been sent. + Therefore I (bill) have taken this out. + However - this might make sense for framing errors and so on + so I am leaving the code in for now. + */ + else { + if (error_flag != TTY_NORMAL){ + dbg("error_flag is not normal"); + /* In this case it is just status - if that is an error send a bad character */ + if(tty->flip.count >= TTY_FLIPBUF_SIZE) { + tty_flip_buffer_push(tty); + } + tty_insert_flip_char(tty, 0xff, error_flag); + need_flip = 1; + } + } +#endif + } /* "for(packet_offset=0..." */ + + /* Low latency */ + if (need_flip) { + tty_flip_buffer_push(tty); + } + + /* if the port is closed stop trying to read */ + if (port->open_count > 0){ + /* Continue trying to always read */ + usb_fill_bulk_urb(port->read_urb, port->serial->dev, + usb_rcvbulkpipe(port->serial->dev, port->bulk_in_endpointAddress), + port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length, + ftdi_read_bulk_callback, port); + + result = usb_submit_urb(port->read_urb, GFP_ATOMIC); + if (result) + err("%s - failed resubmitting read urb, error %d", __FUNCTION__, result); + } + + return; +} /* ftdi_process_read */ + + +static void ftdi_break_ctl( struct usb_serial_port *port, int break_state ) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + __u16 urb_value = 0; + char buf[1]; + + /* break_state = -1 to turn on break, and 0 to turn off break */ + /* see drivers/char/tty_io.c to see it used */ + /* last_set_data_urb_value NEVER has the break bit set in it */ + + if (break_state) { + urb_value = priv->last_set_data_urb_value | FTDI_SIO_SET_BREAK; + } else { + urb_value = priv->last_set_data_urb_value; + } + + + if (usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0), + FTDI_SIO_SET_DATA_REQUEST, + FTDI_SIO_SET_DATA_REQUEST_TYPE, + urb_value , priv->interface, + buf, 0, WDR_TIMEOUT) < 0) { + err("%s FAILED to enable/disable break state (state was %d)", __FUNCTION__,break_state); + } + + dbg("%s break state is %d - urb is %d", __FUNCTION__,break_state, urb_value); + +} + + +/* old_termios contains the original termios settings and tty->termios contains + * the new setting to be used + * WARNING: set_termios calls this with old_termios in kernel space + */ + +static void ftdi_set_termios (struct usb_serial_port *port, struct termios *old_termios) +{ /* ftdi_termios */ + struct usb_device *dev = port->serial->dev; + unsigned int cflag = port->tty->termios->c_cflag; + struct ftdi_private *priv = usb_get_serial_port_data(port); + __u16 urb_value; /* will hold the new flags */ + char buf[1]; /* Perhaps I should dynamically alloc this? */ + + // Added for xon/xoff support + unsigned int iflag = port->tty->termios->c_iflag; + unsigned char vstop; + unsigned char vstart; + + dbg("%s", __FUNCTION__); + + /* Force baud rate if this device requires it, unless it is set to B0. */ + if (priv->force_baud && ((port->tty->termios->c_cflag & CBAUD) != B0)) { + dbg("%s: forcing baud rate for this device", __FUNCTION__); + port->tty->termios->c_cflag &= ~CBAUD; + port->tty->termios->c_cflag |= priv->force_baud; + } + + /* Force RTS-CTS if this device requires it. */ + if (priv->force_rtscts) { + dbg("%s: forcing rtscts for this device", __FUNCTION__); + port->tty->termios->c_cflag |= CRTSCTS; + } + + cflag = port->tty->termios->c_cflag; + + /* FIXME -For this cut I don't care if the line is really changing or + not - so just do the change regardless - should be able to + compare old_termios and tty->termios */ + /* NOTE These routines can get interrupted by + ftdi_sio_read_bulk_callback - need to examine what this + means - don't see any problems yet */ + + /* Set number of data bits, parity, stop bits */ + + urb_value = 0; + urb_value |= (cflag & CSTOPB ? FTDI_SIO_SET_DATA_STOP_BITS_2 : + FTDI_SIO_SET_DATA_STOP_BITS_1); + urb_value |= (cflag & PARENB ? + (cflag & PARODD ? FTDI_SIO_SET_DATA_PARITY_ODD : + FTDI_SIO_SET_DATA_PARITY_EVEN) : + FTDI_SIO_SET_DATA_PARITY_NONE); + if (cflag & CSIZE) { + switch (cflag & CSIZE) { + case CS5: urb_value |= 5; dbg("Setting CS5"); break; + case CS6: urb_value |= 6; dbg("Setting CS6"); break; + case CS7: urb_value |= 7; dbg("Setting CS7"); break; + case CS8: urb_value |= 8; dbg("Setting CS8"); break; + default: + err("CSIZE was set but not CS5-CS8"); + } + } + + /* This is needed by the break command since it uses the same command - but is + * or'ed with this value */ + priv->last_set_data_urb_value = urb_value; + + if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + FTDI_SIO_SET_DATA_REQUEST, + FTDI_SIO_SET_DATA_REQUEST_TYPE, + urb_value , priv->interface, + buf, 0, 100) < 0) { + err("%s FAILED to set databits/stopbits/parity", __FUNCTION__); + } + + /* Now do the baudrate */ + if ((cflag & CBAUD) == B0 ) { + /* Disable flow control */ + if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + FTDI_SIO_SET_FLOW_CTRL_REQUEST, + FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, + 0, priv->interface, + buf, 0, WDR_TIMEOUT) < 0) { + err("%s error from disable flowcontrol urb", __FUNCTION__); + } + /* Drop RTS and DTR */ + if (set_dtr(port, LOW) < 0){ + err("%s Error from DTR LOW urb", __FUNCTION__); + } + if (set_rts(port, LOW) < 0){ + err("%s Error from RTS LOW urb", __FUNCTION__); + } + + } else { + /* set the baudrate determined before */ + if (change_speed(port)) { + err("%s urb failed to set baurdrate", __FUNCTION__); + } + /* Ensure RTS and DTR are raised */ + else if (set_dtr(port, HIGH) < 0){ + err("%s Error from DTR HIGH urb", __FUNCTION__); + } + else if (set_rts(port, HIGH) < 0){ + err("%s Error from RTS HIGH urb", __FUNCTION__); + } + } + + /* Set flow control */ + /* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */ + if (cflag & CRTSCTS) { + dbg("%s Setting to CRTSCTS flow control", __FUNCTION__); + if (usb_control_msg(dev, + usb_sndctrlpipe(dev, 0), + FTDI_SIO_SET_FLOW_CTRL_REQUEST, + FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, + 0 , (FTDI_SIO_RTS_CTS_HS | priv->interface), + buf, 0, WDR_TIMEOUT) < 0) { + err("urb failed to set to rts/cts flow control"); + } + + } else { + /* + * Xon/Xoff code + * + * Check the IXOFF status in the iflag component of the termios structure + * if IXOFF is not set, the pre-xon/xoff code is executed. + */ + if (iflag & IXOFF) { + dbg("%s request to enable xonxoff iflag=%04x",__FUNCTION__,iflag); + // Try to enable the XON/XOFF on the ftdi_sio + // Set the vstart and vstop -- could have been done up above where + // a lot of other dereferencing is done but that would be very + // inefficient as vstart and vstop are not always needed + vstart=port->tty->termios->c_cc[VSTART]; + vstop=port->tty->termios->c_cc[VSTOP]; + urb_value=(vstop << 8) | (vstart); + + if (usb_control_msg(dev, + usb_sndctrlpipe(dev, 0), + FTDI_SIO_SET_FLOW_CTRL_REQUEST, + FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, + urb_value , (FTDI_SIO_XON_XOFF_HS + | priv->interface), + buf, 0, WDR_TIMEOUT) < 0) { + err("urb failed to set to xon/xoff flow control"); + } + } else { + /* else clause to only run if cfag ! CRTSCTS and iflag ! XOFF */ + /* CHECKME Assuming XON/XOFF handled by tty stack - not by device */ + dbg("%s Turning off hardware flow control", __FUNCTION__); + if (usb_control_msg(dev, + usb_sndctrlpipe(dev, 0), + FTDI_SIO_SET_FLOW_CTRL_REQUEST, + FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, + 0, priv->interface, + buf, 0, WDR_TIMEOUT) < 0) { + err("urb failed to clear flow control"); + } + } + + } + return; +} /* ftdi_termios */ + + +static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + unsigned char buf[2]; + int ret; + + dbg("%s TIOCMGET", __FUNCTION__); + switch (priv->chip_type) { + case SIO: + /* Request the status from the device */ + if ((ret = usb_control_msg(port->serial->dev, + usb_rcvctrlpipe(port->serial->dev, 0), + FTDI_SIO_GET_MODEM_STATUS_REQUEST, + FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE, + 0, 0, + buf, 1, WDR_TIMEOUT)) < 0 ) { + err("%s Could not get modem status of device - err: %d", __FUNCTION__, + ret); + return(ret); + } + break; + case FT8U232AM: + case FT232BM: + case FT2232C: + /* the 8U232AM returns a two byte value (the sio is a 1 byte value) - in the same + format as the data returned from the in point */ + if ((ret = usb_control_msg(port->serial->dev, + usb_rcvctrlpipe(port->serial->dev, 0), + FTDI_SIO_GET_MODEM_STATUS_REQUEST, + FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE, + 0, priv->interface, + buf, 2, WDR_TIMEOUT)) < 0 ) { + err("%s Could not get modem status of device - err: %d", __FUNCTION__, + ret); + return(ret); + } + break; + default: + return -EFAULT; + break; + } + + return (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) | + (buf[0] & FTDI_SIO_CTS_MASK ? TIOCM_CTS : 0) | + (buf[0] & FTDI_SIO_RI_MASK ? TIOCM_RI : 0) | + (buf[0] & FTDI_SIO_RLSD_MASK ? TIOCM_CD : 0) | + priv->last_dtr_rts; +} + +static int ftdi_tiocmset(struct usb_serial_port *port, struct file * file, unsigned int set, unsigned int clear) +{ + int ret; + + dbg("%s TIOCMSET", __FUNCTION__); + if (set & TIOCM_DTR){ + if ((ret = set_dtr(port, HIGH)) < 0) { + err("Urb to set DTR failed"); + return(ret); + } + } + if (set & TIOCM_RTS) { + if ((ret = set_rts(port, HIGH)) < 0){ + err("Urb to set RTS failed"); + return(ret); + } + } + + if (clear & TIOCM_DTR){ + if ((ret = set_dtr(port, LOW)) < 0){ + err("Urb to unset DTR failed"); + return(ret); + } + } + if (clear & TIOCM_RTS) { + if ((ret = set_rts(port, LOW)) < 0){ + err("Urb to unset RTS failed"); + return(ret); + } + } + return(0); +} + + +static int ftdi_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + + int ret, mask; + + dbg("%s cmd 0x%04x", __FUNCTION__, cmd); + + /* Based on code from acm.c and others */ + switch (cmd) { + + case TIOCMBIS: /* turns on (Sets) the lines as specified by the mask */ + dbg("%s TIOCMBIS", __FUNCTION__); + if (get_user(mask, (unsigned long __user *) arg)) + return -EFAULT; + if (mask & TIOCM_DTR){ + if ((ret = set_dtr(port, HIGH)) < 0) { + err("Urb to set DTR failed"); + return(ret); + } + } + if (mask & TIOCM_RTS) { + if ((ret = set_rts(port, HIGH)) < 0){ + err("Urb to set RTS failed"); + return(ret); + } + } + return(0); + break; + + case TIOCMBIC: /* turns off (Clears) the lines as specified by the mask */ + dbg("%s TIOCMBIC", __FUNCTION__); + if (get_user(mask, (unsigned long __user *) arg)) + return -EFAULT; + if (mask & TIOCM_DTR){ + if ((ret = set_dtr(port, LOW)) < 0){ + err("Urb to unset DTR failed"); + return(ret); + } + } + if (mask & TIOCM_RTS) { + if ((ret = set_rts(port, LOW)) < 0){ + err("Urb to unset RTS failed"); + return(ret); + } + } + return(0); + break; + + /* + * I had originally implemented TCSET{A,S}{,F,W} and + * TCGET{A,S} here separately, however when testing I + * found that the higher layers actually do the termios + * conversions themselves and pass the call onto + * ftdi_sio_set_termios. + * + */ + + case TIOCGSERIAL: /* gets serial port data */ + return get_serial_info(port, (struct serial_struct __user *) arg); + + case TIOCSSERIAL: /* sets serial port data */ + return set_serial_info(port, (struct serial_struct __user *) arg); + + /* + * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change + * - mask passed in arg for lines of interest + * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) + * Caller should use TIOCGICOUNT to see which one it was. + * + * This code is borrowed from linux/drivers/char/serial.c + */ + case TIOCMIWAIT: + while (priv != NULL) { + interruptible_sleep_on(&priv->delta_msr_wait); + /* see if a signal did it */ + if (signal_pending(current)) + return -ERESTARTSYS; + else { + char diff = priv->diff_status; + + if (diff == 0) { + return -EIO; /* no change => error */ + } + + /* Consume all events */ + priv->diff_status = 0; + + /* Return 0 if caller wanted to know about these bits */ + if ( ((arg & TIOCM_RNG) && (diff & FTDI_RS0_RI)) || + ((arg & TIOCM_DSR) && (diff & FTDI_RS0_DSR)) || + ((arg & TIOCM_CD) && (diff & FTDI_RS0_RLSD)) || + ((arg & TIOCM_CTS) && (diff & FTDI_RS0_CTS)) ) { + return 0; + } + /* + * Otherwise caller can't care less about what happened, + * and so we continue to wait for more events. + */ + } + } + return(0); + break; + default: + break; + + } + + + /* This is not necessarily an error - turns out the higher layers will do + * some ioctls itself (see comment above) + */ + dbg("%s arg not supported - it was 0x%04x - check /usr/include/asm/ioctls.h", __FUNCTION__, cmd); + + return(-ENOIOCTLCMD); +} /* ftdi_ioctl */ + + +static void ftdi_throttle (struct usb_serial_port *port) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + + dbg("%s - port %d", __FUNCTION__, port->number); + + spin_lock_irqsave(&priv->rx_lock, flags); + priv->rx_flags |= THROTTLED; + spin_unlock_irqrestore(&priv->rx_lock, flags); +} + + +static void ftdi_unthrottle (struct usb_serial_port *port) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + int actually_throttled; + unsigned long flags; + + dbg("%s - port %d", __FUNCTION__, port->number); + + spin_lock_irqsave(&priv->rx_lock, flags); + actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED; + priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED); + spin_unlock_irqrestore(&priv->rx_lock, flags); + + if (actually_throttled) + ftdi_process_read(port); +} + +static int __init ftdi_init (void) +{ + int retval; + + dbg("%s", __FUNCTION__); + retval = usb_serial_register(&ftdi_SIO_device); + if (retval) + goto failed_SIO_register; + retval = usb_serial_register(&ftdi_8U232AM_device); + if (retval) + goto failed_8U232AM_register; + retval = usb_serial_register(&ftdi_FT232BM_device); + if (retval) + goto failed_FT232BM_register; + retval = usb_serial_register(&ftdi_FT2232C_device); + if (retval) + goto failed_FT2232C_register; + retval = usb_serial_register(&ftdi_USB_UIRT_device); + if (retval) + goto failed_USB_UIRT_register; + retval = usb_serial_register(&ftdi_HE_TIRA1_device); + if (retval) + goto failed_HE_TIRA1_register; + retval = usb_register(&ftdi_driver); + if (retval) + goto failed_usb_register; + + info(DRIVER_VERSION ":" DRIVER_DESC); + return 0; +failed_usb_register: + usb_serial_deregister(&ftdi_HE_TIRA1_device); +failed_HE_TIRA1_register: + usb_serial_deregister(&ftdi_USB_UIRT_device); +failed_USB_UIRT_register: + usb_serial_deregister(&ftdi_FT2232C_device); +failed_FT2232C_register: + usb_serial_deregister(&ftdi_FT232BM_device); +failed_FT232BM_register: + usb_serial_deregister(&ftdi_8U232AM_device); +failed_8U232AM_register: + usb_serial_deregister(&ftdi_SIO_device); +failed_SIO_register: + return retval; +} + + +static void __exit ftdi_exit (void) +{ + + dbg("%s", __FUNCTION__); + + usb_deregister (&ftdi_driver); + usb_serial_deregister (&ftdi_HE_TIRA1_device); + usb_serial_deregister (&ftdi_USB_UIRT_device); + usb_serial_deregister (&ftdi_FT2232C_device); + usb_serial_deregister (&ftdi_FT232BM_device); + usb_serial_deregister (&ftdi_8U232AM_device); + usb_serial_deregister (&ftdi_SIO_device); + +} + + +module_init(ftdi_init); +module_exit(ftdi_exit); + +MODULE_AUTHOR( DRIVER_AUTHOR ); +MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_LICENSE("GPL"); + +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug enabled or not"); + -- cgit v1.2.3