From 441b62c1edb986827154768d89bbac0ba779984f Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Mon, 3 Mar 2008 16:08:34 -0800 Subject: USB: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 156 +++++++++++++++++++++--------------------- 1 file changed, 78 insertions(+), 78 deletions(-) (limited to 'drivers/usb/serial/ftdi_sio.c') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 54b502f2924..8b531b377dc 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -525,7 +525,7 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set, unsigned int rv; if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) { - dbg("%s - DTR|RTS not being set|cleared", __FUNCTION__); + dbg("%s - DTR|RTS not being set|cleared", __func__); return 0; /* no change */ } @@ -553,13 +553,13 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set, unsigned kfree(buf); if (rv < 0) { err("%s Error from MODEM_CTRL urb: DTR %s, RTS %s", - __FUNCTION__, + __func__, (set & TIOCM_DTR) ? "HIGH" : (clear & TIOCM_DTR) ? "LOW" : "unchanged", (set & TIOCM_RTS) ? "HIGH" : (clear & TIOCM_RTS) ? "LOW" : "unchanged"); } else { - dbg("%s - DTR %s, RTS %s", __FUNCTION__, + dbg("%s - DTR %s, RTS %s", __func__, (set & TIOCM_DTR) ? "HIGH" : (clear & TIOCM_DTR) ? "LOW" : "unchanged", (set & TIOCM_RTS) ? "HIGH" : @@ -639,7 +639,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port) /* 1. Get the baud rate from the tty settings, this observes alt_speed hack */ baud = tty_get_baud_rate(port->tty); - dbg("%s - tty_get_baud_rate reports speed %d", __FUNCTION__, baud); + dbg("%s - tty_get_baud_rate reports speed %d", __func__, baud); /* 2. Observe async-compatible custom_divisor hack, update baudrate if needed */ @@ -647,7 +647,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port) ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) && (priv->custom_divisor)) { baud = priv->baud_base / priv->custom_divisor; - dbg("%s - custom divisor %d sets baud rate to %d", __FUNCTION__, priv->custom_divisor, baud); + dbg("%s - custom divisor %d sets baud rate to %d", __func__, priv->custom_divisor, baud); } /* 3. Convert baudrate to device-specific divisor */ @@ -668,7 +668,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port) case 115200: div_value = ftdi_sio_b115200; break; } /* baud */ if (div_value == 0) { - dbg("%s - Baudrate (%d) requested is not supported", __FUNCTION__, baud); + dbg("%s - Baudrate (%d) requested is not supported", __func__, baud); div_value = ftdi_sio_b9600; baud = 9600; div_okay = 0; @@ -678,7 +678,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port) if (baud <= 3000000) { div_value = ftdi_232am_baud_to_divisor(baud); } else { - dbg("%s - Baud rate too high!", __FUNCTION__); + dbg("%s - Baud rate too high!", __func__); baud = 9600; div_value = ftdi_232am_baud_to_divisor(9600); div_okay = 0; @@ -690,7 +690,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port) if (baud <= 3000000) { div_value = ftdi_232bm_baud_to_divisor(baud); } else { - dbg("%s - Baud rate too high!", __FUNCTION__); + dbg("%s - Baud rate too high!", __func__); div_value = ftdi_232bm_baud_to_divisor(9600); div_okay = 0; baud = 9600; @@ -700,7 +700,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port) if (div_okay) { dbg("%s - Baud rate set to %d (divisor 0x%lX) on chip %s", - __FUNCTION__, baud, (unsigned long)div_value, + __func__, baud, (unsigned long)div_value, ftdi_chip_name[priv->chip_type]); } @@ -801,7 +801,7 @@ static void ftdi_determine_type(struct usb_serial_port *port) version = le16_to_cpu(udev->descriptor.bcdDevice); interfaces = udev->actconfig->desc.bNumInterfaces; - dbg("%s: bcdDevice = 0x%x, bNumInterfaces = %u", __FUNCTION__, + dbg("%s: bcdDevice = 0x%x, bNumInterfaces = %u", __func__, version, interfaces); if (interfaces > 1) { int inter; @@ -819,7 +819,7 @@ static void ftdi_determine_type(struct usb_serial_port *port) * to 0x200 when iSerialNumber is 0. */ if (version < 0x500) { dbg("%s: something fishy - bcdDevice too low for multi-interface device", - __FUNCTION__); + __func__); } } else if (version < 0x200) { /* Old device. Assume its the original SIO. */ @@ -857,7 +857,7 @@ static ssize_t show_latency_timer(struct device *dev, struct device_attribute *a int rv = 0; - dbg("%s",__FUNCTION__); + dbg("%s",__func__); rv = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), @@ -884,7 +884,7 @@ static ssize_t store_latency_timer(struct device *dev, struct device_attribute * int v = simple_strtoul(valbuf, NULL, 10); int rv = 0; - dbg("%s: setting latency timer = %i", __FUNCTION__, v); + dbg("%s: setting latency timer = %i", __func__, v); rv = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), @@ -913,7 +913,7 @@ static ssize_t store_event_char(struct device *dev, struct device_attribute *att int v = simple_strtoul(valbuf, NULL, 10); int rv = 0; - dbg("%s: setting event char = %i", __FUNCTION__, v); + dbg("%s: setting event char = %i", __func__, v); rv = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), @@ -938,7 +938,7 @@ static int create_sysfs_attrs(struct usb_serial_port *port) struct ftdi_private *priv = usb_get_serial_port_data(port); int retval = 0; - dbg("%s",__FUNCTION__); + dbg("%s",__func__); /* XXX I've no idea if the original SIO supports the event_char * sysfs parameter, so I'm playing it safe. */ @@ -960,7 +960,7 @@ static void remove_sysfs_attrs(struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); - dbg("%s",__FUNCTION__); + dbg("%s",__func__); /* XXX see create_sysfs_attrs */ if (priv->chip_type != SIO) { @@ -1002,11 +1002,11 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) struct ftdi_sio_quirk *quirk = usb_get_serial_data(port->serial); - dbg("%s",__FUNCTION__); + dbg("%s",__func__); priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL); if (!priv){ - err("%s- kmalloc(%Zd) failed.", __FUNCTION__, sizeof(struct ftdi_private)); + err("%s- kmalloc(%Zd) failed.", __func__, sizeof(struct ftdi_private)); return -ENOMEM; } @@ -1055,7 +1055,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) /* Called from usbserial:serial_probe */ static void ftdi_USB_UIRT_setup (struct ftdi_private *priv) { - dbg("%s",__FUNCTION__); + dbg("%s",__func__); priv->flags |= ASYNC_SPD_CUST; priv->custom_divisor = 77; @@ -1066,7 +1066,7 @@ static void ftdi_USB_UIRT_setup (struct ftdi_private *priv) * baudrate (38400 gets mapped to 100000) and RTS-CTS enabled. */ static void ftdi_HE_TIRA1_setup (struct ftdi_private *priv) { - dbg("%s",__FUNCTION__); + dbg("%s",__func__); priv->flags |= ASYNC_SPD_CUST; priv->custom_divisor = 240; @@ -1084,7 +1084,7 @@ static int ftdi_jtag_probe(struct usb_serial *serial) struct usb_device *udev = serial->dev; struct usb_interface *interface = serial->interface; - dbg("%s",__FUNCTION__); + dbg("%s",__func__); if (interface == udev->actconfig->interface[0]) { info("Ignoring serial port reserved for JTAG"); @@ -1120,14 +1120,14 @@ static int ftdi_mtxorb_hack_setup(struct usb_serial *serial) */ static void ftdi_shutdown (struct usb_serial *serial) { - dbg("%s", __FUNCTION__); + dbg("%s", __func__); } static int ftdi_sio_port_remove(struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); - dbg("%s", __FUNCTION__); + dbg("%s", __func__); remove_sysfs_attrs(port); @@ -1152,7 +1152,7 @@ static int ftdi_open (struct usb_serial_port *port, struct file *filp) int result = 0; char buf[1]; /* Needed for the usb_control_msg I think */ - dbg("%s", __FUNCTION__); + dbg("%s", __func__); spin_lock_irqsave(&priv->tx_lock, flags); priv->tx_bytes = 0; @@ -1197,7 +1197,7 @@ static int ftdi_open (struct usb_serial_port *port, struct file *filp) ftdi_read_bulk_callback, port); result = usb_submit_urb(port->read_urb, GFP_KERNEL); if (result) - err("%s - failed submitting read urb, error %d", __FUNCTION__, result); + err("%s - failed submitting read urb, error %d", __func__, result); return result; @@ -1219,7 +1219,7 @@ static void ftdi_close (struct usb_serial_port *port, struct file *filp) struct ftdi_private *priv = usb_get_serial_port_data(port); char buf[1]; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); mutex_lock(&port->serial->disc_mutex); if (c_cflag & HUPCL && !port->serial->disconnected){ @@ -1266,7 +1266,7 @@ static int ftdi_write (struct usb_serial_port *port, int transfer_size; unsigned long flags; - dbg("%s port %d, %d bytes", __FUNCTION__, port->number, count); + dbg("%s port %d, %d bytes", __func__, port->number, count); if (count == 0) { dbg("write request of 0 bytes"); @@ -1275,7 +1275,7 @@ static int ftdi_write (struct usb_serial_port *port, spin_lock_irqsave(&priv->tx_lock, flags); if (priv->tx_outstanding_urbs > URB_UPPER_LIMIT) { spin_unlock_irqrestore(&priv->tx_lock, flags); - dbg("%s - write limit hit\n", __FUNCTION__); + dbg("%s - write limit hit\n", __func__); return 0; } priv->tx_outstanding_urbs++; @@ -1295,14 +1295,14 @@ static int ftdi_write (struct usb_serial_port *port, buffer = kmalloc (transfer_size, GFP_ATOMIC); if (!buffer) { - err("%s ran out of kernel memory for urb ...", __FUNCTION__); + err("%s ran out of kernel memory for urb ...", __func__); count = -ENOMEM; goto error_no_buffer; } urb = usb_alloc_urb(0, GFP_ATOMIC); if (!urb) { - err("%s - no more free urbs", __FUNCTION__); + err("%s - no more free urbs", __func__); count = -ENOMEM; goto error_no_urb; } @@ -1334,7 +1334,7 @@ static int ftdi_write (struct usb_serial_port *port, memcpy (buffer, buf, count); } - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, transfer_size, buffer); + usb_serial_debug_data(debug, &port->dev, __func__, transfer_size, buffer); /* fill the buffer and send it */ usb_fill_bulk_urb(urb, port->serial->dev, @@ -1344,7 +1344,7 @@ static int ftdi_write (struct usb_serial_port *port, status = usb_submit_urb(urb, GFP_ATOMIC); if (status) { - err("%s - failed submitting write urb, error %d", __FUNCTION__, status); + err("%s - failed submitting write urb, error %d", __func__, status); count = status; goto error; } else { @@ -1358,7 +1358,7 @@ static int ftdi_write (struct usb_serial_port *port, * really free it when it is finished with it */ usb_free_urb(urb); - dbg("%s write returning: %d", __FUNCTION__, count); + dbg("%s write returning: %d", __func__, count); return count; error: usb_free_urb(urb); @@ -1386,7 +1386,7 @@ static void ftdi_write_bulk_callback (struct urb *urb) /* free up the transfer buffer, as usb_free_urb() does not do this */ kfree (urb->transfer_buffer); - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (status) { dbg("nonzero write bulk status received: %d", status); @@ -1395,7 +1395,7 @@ static void ftdi_write_bulk_callback (struct urb *urb) priv = usb_get_serial_port_data(port); if (!priv) { - dbg("%s - bad port private data pointer - exiting", __FUNCTION__); + dbg("%s - bad port private data pointer - exiting", __func__); return; } /* account for transferred data */ @@ -1420,7 +1420,7 @@ static int ftdi_write_room( struct usb_serial_port *port ) int room; unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&priv->tx_lock, flags); if (priv->tx_outstanding_urbs < URB_UPPER_LIMIT) { @@ -1444,13 +1444,13 @@ static int ftdi_chars_in_buffer (struct usb_serial_port *port) int buffered; unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&priv->tx_lock, flags); buffered = (int)priv->tx_outstanding_bytes; spin_unlock_irqrestore(&priv->tx_lock, flags); if (buffered < 0) { - err("%s outstanding tx bytes is negative!", __FUNCTION__); + err("%s outstanding tx bytes is negative!", __func__); buffered = 0; } return buffered; @@ -1468,30 +1468,30 @@ static void ftdi_read_bulk_callback (struct urb *urb) int status = urb->status; if (urb->number_of_packets > 0) { - err("%s transfer_buffer_length %d actual_length %d number of packets %d",__FUNCTION__, + err("%s transfer_buffer_length %d actual_length %d number of packets %d",__func__, urb->transfer_buffer_length, urb->actual_length, urb->number_of_packets ); - err("%s transfer_flags %x ", __FUNCTION__,urb->transfer_flags ); + err("%s transfer_flags %x ", __func__,urb->transfer_flags ); } - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (port->open_count <= 0) return; tty = port->tty; if (!tty) { - dbg("%s - bad tty pointer - exiting",__FUNCTION__); + dbg("%s - bad tty pointer - exiting",__func__); return; } priv = usb_get_serial_port_data(port); if (!priv) { - dbg("%s - bad port private data pointer - exiting", __FUNCTION__); + dbg("%s - bad port private data pointer - exiting", __func__); return; } if (urb != port->read_urb) { - err("%s - Not my urb!", __FUNCTION__); + err("%s - Not my urb!", __func__); } if (status) { @@ -1529,39 +1529,39 @@ static void ftdi_process_read (struct work_struct *work) int packet_offset; unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (port->open_count <= 0) return; tty = port->tty; if (!tty) { - dbg("%s - bad tty pointer - exiting",__FUNCTION__); + dbg("%s - bad tty pointer - exiting",__func__); return; } priv = usb_get_serial_port_data(port); if (!priv) { - dbg("%s - bad port private data pointer - exiting", __FUNCTION__); + dbg("%s - bad port private data pointer - exiting", __func__); return; } urb = port->read_urb; if (!urb) { - dbg("%s - bad read_urb pointer - exiting", __FUNCTION__); + dbg("%s - bad read_urb pointer - exiting", __func__); return; } data = urb->transfer_buffer; if (priv->rx_processed) { - dbg("%s - already processed: %d bytes, %d remain", __FUNCTION__, + dbg("%s - already processed: %d bytes, %d remain", __func__, priv->rx_processed, urb->actual_length - priv->rx_processed); } else { /* The first two bytes of every read packet are status */ if (urb->actual_length > 2) { - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data); + usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); } else { dbg("Status only: %03oo %03oo",data[0],data[1]); } @@ -1591,17 +1591,17 @@ static void ftdi_process_read (struct work_struct *work) length = min(PKTSZ, urb->actual_length-packet_offset)-2; if (length < 0) { - err("%s - bad packet length: %d", __FUNCTION__, length+2); + err("%s - bad packet length: %d", __func__, length+2); length = 0; } if (priv->rx_flags & THROTTLED) { - dbg("%s - throttled", __FUNCTION__); + dbg("%s - throttled", __func__); break; } if (tty_buffer_request_room(tty, length) < length) { /* break out & wait for throttling/unthrottling to happen */ - dbg("%s - receive room low", __FUNCTION__); + dbg("%s - receive room low", __func__); break; } @@ -1669,7 +1669,7 @@ static void ftdi_process_read (struct work_struct *work) /* not completely processed - record progress */ priv->rx_processed = packet_offset; dbg("%s - incomplete, %d bytes processed, %d remain", - __FUNCTION__, packet_offset, + __func__, packet_offset, urb->actual_length - packet_offset); /* check if we were throttled while processing */ spin_lock_irqsave(&priv->rx_lock, flags); @@ -1677,7 +1677,7 @@ static void ftdi_process_read (struct work_struct *work) priv->rx_flags |= ACTUALLY_THROTTLED; spin_unlock_irqrestore(&priv->rx_lock, flags); dbg("%s - deferring remainder until unthrottled", - __FUNCTION__); + __func__); return; } spin_unlock_irqrestore(&priv->rx_lock, flags); @@ -1686,7 +1686,7 @@ static void ftdi_process_read (struct work_struct *work) /* delay processing of remainder */ schedule_delayed_work(&priv->rx_work, 1); } else { - dbg("%s - port is closed", __FUNCTION__); + dbg("%s - port is closed", __func__); } return; } @@ -1704,7 +1704,7 @@ static void ftdi_process_read (struct work_struct *work) result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) - err("%s - failed resubmitting read urb, error %d", __FUNCTION__, result); + err("%s - failed resubmitting read urb, error %d", __func__, result); } return; @@ -1733,10 +1733,10 @@ static void ftdi_break_ctl( struct usb_serial_port *port, int break_state ) FTDI_SIO_SET_DATA_REQUEST_TYPE, urb_value , priv->interface, buf, 0, WDR_TIMEOUT) < 0) { - err("%s FAILED to enable/disable break state (state was %d)", __FUNCTION__,break_state); + err("%s FAILED to enable/disable break state (state was %d)", __func__,break_state); } - dbg("%s break state is %d - urb is %d", __FUNCTION__,break_state, urb_value); + dbg("%s break state is %d - urb is %d", __func__,break_state, urb_value); } @@ -1760,18 +1760,18 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old unsigned char vstop; unsigned char vstart; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); /* Force baud rate if this device requires it, unless it is set to B0. */ if (priv->force_baud && ((termios->c_cflag & CBAUD) != B0)) { - dbg("%s: forcing baud rate for this device", __FUNCTION__); + dbg("%s: forcing baud rate for this device", __func__); tty_encode_baud_rate(port->tty, priv->force_baud, priv->force_baud); } /* Force RTS-CTS if this device requires it. */ if (priv->force_rtscts) { - dbg("%s: forcing rtscts for this device", __FUNCTION__); + dbg("%s: forcing rtscts for this device", __func__); termios->c_cflag |= CRTSCTS; } @@ -1815,7 +1815,7 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old FTDI_SIO_SET_DATA_REQUEST_TYPE, urb_value , priv->interface, buf, 0, WDR_SHORT_TIMEOUT) < 0) { - err("%s FAILED to set databits/stopbits/parity", __FUNCTION__); + err("%s FAILED to set databits/stopbits/parity", __func__); } /* Now do the baudrate */ @@ -1826,14 +1826,14 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 0, priv->interface, buf, 0, WDR_TIMEOUT) < 0) { - err("%s error from disable flowcontrol urb", __FUNCTION__); + err("%s error from disable flowcontrol urb", __func__); } /* Drop RTS and DTR */ clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); } else { /* set the baudrate determined before */ if (change_speed(port)) { - err("%s urb failed to set baudrate", __FUNCTION__); + err("%s urb failed to set baudrate", __func__); } /* Ensure RTS and DTR are raised when baudrate changed from 0 */ if (!old_termios || (old_termios->c_cflag & CBAUD) == B0) { @@ -1844,7 +1844,7 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old /* Set flow control */ /* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */ if (cflag & CRTSCTS) { - dbg("%s Setting to CRTSCTS flow control", __FUNCTION__); + dbg("%s Setting to CRTSCTS flow control", __func__); if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), FTDI_SIO_SET_FLOW_CTRL_REQUEST, @@ -1862,7 +1862,7 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old * if IXOFF is not set, the pre-xon/xoff code is executed. */ if (iflag & IXOFF) { - dbg("%s request to enable xonxoff iflag=%04x",__FUNCTION__,iflag); + dbg("%s request to enable xonxoff iflag=%04x",__func__,iflag); // Try to enable the XON/XOFF on the ftdi_sio // Set the vstart and vstop -- could have been done up above where // a lot of other dereferencing is done but that would be very @@ -1883,7 +1883,7 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old } else { /* else clause to only run if cfag ! CRTSCTS and iflag ! XOFF */ /* CHECKME Assuming XON/XOFF handled by tty stack - not by device */ - dbg("%s Turning off hardware flow control", __FUNCTION__); + dbg("%s Turning off hardware flow control", __func__); if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), FTDI_SIO_SET_FLOW_CTRL_REQUEST, @@ -1905,7 +1905,7 @@ static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file) unsigned char buf[2]; int ret; - dbg("%s TIOCMGET", __FUNCTION__); + dbg("%s TIOCMGET", __func__); switch (priv->chip_type) { case SIO: /* Request the status from the device */ @@ -1915,7 +1915,7 @@ static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file) FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE, 0, 0, buf, 1, WDR_TIMEOUT)) < 0 ) { - err("%s Could not get modem status of device - err: %d", __FUNCTION__, + err("%s Could not get modem status of device - err: %d", __func__, ret); return(ret); } @@ -1932,7 +1932,7 @@ static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file) FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE, 0, priv->interface, buf, 2, WDR_TIMEOUT)) < 0 ) { - err("%s Could not get modem status of device - err: %d", __FUNCTION__, + err("%s Could not get modem status of device - err: %d", __func__, ret); return(ret); } @@ -1951,7 +1951,7 @@ static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file) static int ftdi_tiocmset(struct usb_serial_port *port, struct file * file, unsigned int set, unsigned int clear) { - dbg("%s TIOCMSET", __FUNCTION__); + dbg("%s TIOCMSET", __func__); return update_mctrl(port, set, clear); } @@ -1960,7 +1960,7 @@ static int ftdi_ioctl (struct usb_serial_port *port, struct file * file, unsigne { struct ftdi_private *priv = usb_get_serial_port_data(port); - dbg("%s cmd 0x%04x", __FUNCTION__, cmd); + dbg("%s cmd 0x%04x", __func__, cmd); /* Based on code from acm.c and others */ switch (cmd) { @@ -2019,7 +2019,7 @@ static int ftdi_ioctl (struct usb_serial_port *port, struct file * file, unsigne /* This is not necessarily an error - turns out the higher layers will do * some ioctls itself (see comment above) */ - dbg("%s arg not supported - it was 0x%04x - check /usr/include/asm/ioctls.h", __FUNCTION__, cmd); + dbg("%s arg not supported - it was 0x%04x - check /usr/include/asm/ioctls.h", __func__, cmd); return(-ENOIOCTLCMD); } /* ftdi_ioctl */ @@ -2030,7 +2030,7 @@ static void ftdi_throttle (struct usb_serial_port *port) struct ftdi_private *priv = usb_get_serial_port_data(port); unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&priv->rx_lock, flags); priv->rx_flags |= THROTTLED; @@ -2044,7 +2044,7 @@ static void ftdi_unthrottle (struct usb_serial_port *port) int actually_throttled; unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&priv->rx_lock, flags); actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED; @@ -2059,7 +2059,7 @@ static int __init ftdi_init (void) { int retval; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); if (vendor > 0 && product > 0) { /* Add user specified VID/PID to reserved element of table. */ int i; @@ -2088,7 +2088,7 @@ failed_sio_register: static void __exit ftdi_exit (void) { - dbg("%s", __FUNCTION__); + dbg("%s", __func__); usb_deregister (&ftdi_driver); usb_serial_deregister (&ftdi_sio_device); -- cgit v1.2.3