From 3a8a3b1cee6c525661732b8bcf29ac63d42945ed Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Mon, 21 Dec 2009 10:43:06 -0500 Subject: USB: gadget: use ep5 for bulk-in and ep6 for bulk-out for Blackfin MUSB Normally, the musb uses ep1 as the bidirectional bulk endpoint. This won't work on the Blackfin musb as all endpoints (except ep0) are unidirectional. Further, ep1-ep4 have a small 128 byte FIFO which makes them undesirable for bulk endpoints (which need more like a 512 byte FIFO). This leaves us with ep5-ep7 which have 1024 byte FIFOs and can be configured as either in/out and bulk/interrupt/iso on the fly. Signed-off-by: Bryan Wu Signed-off-by: Cliff Cai Signed-off-by: Mike Frysinger Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/epautoconf.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c index cd0914ec898..4671d5d7973 100644 --- a/drivers/usb/gadget/epautoconf.c +++ b/drivers/usb/gadget/epautoconf.c @@ -275,6 +275,20 @@ struct usb_ep * __init usb_ep_autoconfig ( ep = find_ep (gadget, "ep1-bulk"); if (ep && ep_matches (gadget, ep, desc)) return ep; + +#ifdef CONFIG_BLACKFIN + } else if (gadget_is_musbhsfc(gadget) || gadget_is_musbhdrc(gadget)) { + if ((USB_ENDPOINT_XFER_BULK == type) || + (USB_ENDPOINT_XFER_ISOC == type)) { + if (USB_DIR_IN & desc->bEndpointAddress) + ep = find_ep (gadget, "ep5in"); + else + ep = find_ep (gadget, "ep6out"); + } else + ep = NULL; + if (ep && ep_matches (gadget, ep, desc)) + return ep; +#endif } /* Second, look at endpoints until an unclaimed one looks usable */ -- cgit v1.2.3