From bd529cfb40c427d5b5aae0d315afb9f0a1da5e76 Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Tue, 6 Dec 2005 13:38:28 +0300 Subject: [PATCH] W1: Move w1 bus master code into 'w1/masters' and move w1 slave code into 'w1/slaves' Signed-off-by: Ben Gardner Signed-off-by: Evgeniy Polyakov Signed-off-by: Greg Kroah-Hartman --- drivers/w1/slaves/Kconfig | 38 +++++ drivers/w1/slaves/Makefile | 12 ++ drivers/w1/slaves/w1_ds2433.c | 329 ++++++++++++++++++++++++++++++++++++++++++ drivers/w1/slaves/w1_smem.c | 71 +++++++++ drivers/w1/slaves/w1_therm.c | 268 ++++++++++++++++++++++++++++++++++ 5 files changed, 718 insertions(+) create mode 100644 drivers/w1/slaves/Kconfig create mode 100644 drivers/w1/slaves/Makefile create mode 100644 drivers/w1/slaves/w1_ds2433.c create mode 100644 drivers/w1/slaves/w1_smem.c create mode 100644 drivers/w1/slaves/w1_therm.c (limited to 'drivers/w1/slaves') diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig new file mode 100644 index 00000000000..f9d4c91fc53 --- /dev/null +++ b/drivers/w1/slaves/Kconfig @@ -0,0 +1,38 @@ +# +# 1-wire slaves configuration +# + +menu "1-wire Slaves" + depends on W1 + +config W1_SLAVE_THERM + tristate "Thermal family implementation" + depends on W1 + help + Say Y here if you want to connect 1-wire thermal sensors to you + wire. + +config W1_SLAVE_SMEM + tristate "Simple 64bit memory family implementation" + depends on W1 + help + Say Y here if you want to connect 1-wire + simple 64bit memory rom(ds2401/ds2411/ds1990*) to you wire. + +config W1_SLAVE_DS2433 + tristate "4kb EEPROM family support (DS2433)" + depends on W1 + help + Say Y here if you want to use a 1-wire + 4kb EEPROM family device (DS2433). + +config W1_SLAVE_DS2433_CRC + bool "Protect DS2433 data with a CRC16" + depends on W1_DS2433 + select CRC16 + help + Say Y here to protect DS2433 data with a CRC16. + Each block has 30 bytes of data and a two byte CRC16. + Full block writes are only allowed if the CRC is valid. + +endmenu diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile new file mode 100644 index 00000000000..70e21e2d70c --- /dev/null +++ b/drivers/w1/slaves/Makefile @@ -0,0 +1,12 @@ +# +# Makefile for the Dallas's 1-wire slaves. +# + +ifeq ($(CONFIG_W1_SLAVE_DS2433_CRC), y) +EXTRA_CFLAGS += -DCONFIG_W1_F23_CRC +endif + +obj-$(CONFIG_W1_SLAVE_THERM) += w1_therm.o +obj-$(CONFIG_W1_SLAVE_SMEM) += w1_smem.o +obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o + diff --git a/drivers/w1/slaves/w1_ds2433.c b/drivers/w1/slaves/w1_ds2433.c new file mode 100644 index 00000000000..fb118be789e --- /dev/null +++ b/drivers/w1/slaves/w1_ds2433.c @@ -0,0 +1,329 @@ +/* + * w1_ds2433.c - w1 family 23 (DS2433) driver + * + * Copyright (c) 2005 Ben Gardner + * + * This source code is licensed under the GNU General Public License, + * Version 2. See the file COPYING for more details. + */ + +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_W1_F23_CRC +#include + +#define CRC16_INIT 0 +#define CRC16_VALID 0xb001 + +#endif + +#include "../w1.h" +#include "../w1_io.h" +#include "../w1_int.h" +#include "../w1_family.h" + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Ben Gardner "); +MODULE_DESCRIPTION("w1 family 23 driver for DS2433, 4kb EEPROM"); + +#define W1_EEPROM_SIZE 512 +#define W1_PAGE_COUNT 16 +#define W1_PAGE_SIZE 32 +#define W1_PAGE_BITS 5 +#define W1_PAGE_MASK 0x1F + +#define W1_F23_TIME 300 + +#define W1_F23_READ_EEPROM 0xF0 +#define W1_F23_WRITE_SCRATCH 0x0F +#define W1_F23_READ_SCRATCH 0xAA +#define W1_F23_COPY_SCRATCH 0x55 + +struct w1_f23_data { + u8 memory[W1_EEPROM_SIZE]; + u32 validcrc; +}; + +/** + * Check the file size bounds and adjusts count as needed. + * This would not be needed if the file size didn't reset to 0 after a write. + */ +static inline size_t w1_f23_fix_count(loff_t off, size_t count, size_t size) +{ + if (off > size) + return 0; + + if ((off + count) > size) + return (size - off); + + return count; +} + +#ifdef CONFIG_W1_F23_CRC +static int w1_f23_refresh_block(struct w1_slave *sl, struct w1_f23_data *data, + int block) +{ + u8 wrbuf[3]; + int off = block * W1_PAGE_SIZE; + + if (data->validcrc & (1 << block)) + return 0; + + if (w1_reset_select_slave(sl)) { + data->validcrc = 0; + return -EIO; + } + + wrbuf[0] = W1_F23_READ_EEPROM; + wrbuf[1] = off & 0xff; + wrbuf[2] = off >> 8; + w1_write_block(sl->master, wrbuf, 3); + w1_read_block(sl->master, &data->memory[off], W1_PAGE_SIZE); + + /* cache the block if the CRC is valid */ + if (crc16(CRC16_INIT, &data->memory[off], W1_PAGE_SIZE) == CRC16_VALID) + data->validcrc |= (1 << block); + + return 0; +} +#endif /* CONFIG_W1_F23_CRC */ + +static ssize_t w1_f23_read_bin(struct kobject *kobj, char *buf, loff_t off, + size_t count) +{ + struct w1_slave *sl = kobj_to_w1_slave(kobj); +#ifdef CONFIG_W1_F23_CRC + struct w1_f23_data *data = sl->family_data; + int i, min_page, max_page; +#else + u8 wrbuf[3]; +#endif + + if ((count = w1_f23_fix_count(off, count, W1_EEPROM_SIZE)) == 0) + return 0; + + atomic_inc(&sl->refcnt); + if (down_interruptible(&sl->master->mutex)) { + count = 0; + goto out_dec; + } + +#ifdef CONFIG_W1_F23_CRC + + min_page = (off >> W1_PAGE_BITS); + max_page = (off + count - 1) >> W1_PAGE_BITS; + for (i = min_page; i <= max_page; i++) { + if (w1_f23_refresh_block(sl, data, i)) { + count = -EIO; + goto out_up; + } + } + memcpy(buf, &data->memory[off], count); + +#else /* CONFIG_W1_F23_CRC */ + + /* read directly from the EEPROM */ + if (w1_reset_select_slave(sl)) { + count = -EIO; + goto out_up; + } + + wrbuf[0] = W1_F23_READ_EEPROM; + wrbuf[1] = off & 0xff; + wrbuf[2] = off >> 8; + w1_write_block(sl->master, wrbuf, 3); + w1_read_block(sl->master, buf, count); + +#endif /* CONFIG_W1_F23_CRC */ + +out_up: + up(&sl->master->mutex); +out_dec: + atomic_dec(&sl->refcnt); + + return count; +} + +/** + * Writes to the scratchpad and reads it back for verification. + * Then copies the scratchpad to EEPROM. + * The data must be on one page. + * The master must be locked. + * + * @param sl The slave structure + * @param addr Address for the write + * @param len length must be <= (W1_PAGE_SIZE - (addr & W1_PAGE_MASK)) + * @param data The data to write + * @return 0=Success -1=failure + */ +static int w1_f23_write(struct w1_slave *sl, int addr, int len, const u8 *data) +{ + u8 wrbuf[4]; + u8 rdbuf[W1_PAGE_SIZE + 3]; + u8 es = (addr + len - 1) & 0x1f; + + /* Write the data to the scratchpad */ + if (w1_reset_select_slave(sl)) + return -1; + + wrbuf[0] = W1_F23_WRITE_SCRATCH; + wrbuf[1] = addr & 0xff; + wrbuf[2] = addr >> 8; + + w1_write_block(sl->master, wrbuf, 3); + w1_write_block(sl->master, data, len); + + /* Read the scratchpad and verify */ + if (w1_reset_select_slave(sl)) + return -1; + + w1_write_8(sl->master, W1_F23_READ_SCRATCH); + w1_read_block(sl->master, rdbuf, len + 3); + + /* Compare what was read against the data written */ + if ((rdbuf[0] != wrbuf[1]) || (rdbuf[1] != wrbuf[2]) || + (rdbuf[2] != es) || (memcmp(data, &rdbuf[3], len) != 0)) + return -1; + + /* Copy the scratchpad to EEPROM */ + if (w1_reset_select_slave(sl)) + return -1; + + wrbuf[0] = W1_F23_COPY_SCRATCH; + wrbuf[3] = es; + w1_write_block(sl->master, wrbuf, 4); + + /* Sleep for 5 ms to wait for the write to complete */ + msleep(5); + + /* Reset the bus to wake up the EEPROM (this may not be needed) */ + w1_reset_bus(sl->master); + + return 0; +} + +static ssize_t w1_f23_write_bin(struct kobject *kobj, char *buf, loff_t off, + size_t count) +{ + struct w1_slave *sl = kobj_to_w1_slave(kobj); + int addr, len, idx; + + if ((count = w1_f23_fix_count(off, count, W1_EEPROM_SIZE)) == 0) + return 0; + +#ifdef CONFIG_W1_F23_CRC + /* can only write full blocks in cached mode */ + if ((off & W1_PAGE_MASK) || (count & W1_PAGE_MASK)) { + dev_err(&sl->dev, "invalid offset/count off=%d cnt=%zd\n", + (int)off, count); + return -EINVAL; + } + + /* make sure the block CRCs are valid */ + for (idx = 0; idx < count; idx += W1_PAGE_SIZE) { + if (crc16(CRC16_INIT, &buf[idx], W1_PAGE_SIZE) != CRC16_VALID) { + dev_err(&sl->dev, "bad CRC at offset %d\n", (int)off); + return -EINVAL; + } + } +#endif /* CONFIG_W1_F23_CRC */ + + atomic_inc(&sl->refcnt); + if (down_interruptible(&sl->master->mutex)) { + count = 0; + goto out_dec; + } + + /* Can only write data to one page at a time */ + idx = 0; + while (idx < count) { + addr = off + idx; + len = W1_PAGE_SIZE - (addr & W1_PAGE_MASK); + if (len > (count - idx)) + len = count - idx; + + if (w1_f23_write(sl, addr, len, &buf[idx]) < 0) { + count = -EIO; + goto out_up; + } + idx += len; + } + +out_up: + up(&sl->master->mutex); +out_dec: + atomic_dec(&sl->refcnt); + + return count; +} + +static struct bin_attribute w1_f23_bin_attr = { + .attr = { + .name = "eeprom", + .mode = S_IRUGO | S_IWUSR, + .owner = THIS_MODULE, + }, + .size = W1_EEPROM_SIZE, + .read = w1_f23_read_bin, + .write = w1_f23_write_bin, +}; + +static int w1_f23_add_slave(struct w1_slave *sl) +{ + int err; +#ifdef CONFIG_W1_F23_CRC + struct w1_f23_data *data; + + data = kmalloc(sizeof(struct w1_f23_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + memset(data, 0, sizeof(struct w1_f23_data)); + sl->family_data = data; + +#endif /* CONFIG_W1_F23_CRC */ + + err = sysfs_create_bin_file(&sl->dev.kobj, &w1_f23_bin_attr); + +#ifdef CONFIG_W1_F23_CRC + if (err) + kfree(data); +#endif /* CONFIG_W1_F23_CRC */ + + return err; +} + +static void w1_f23_remove_slave(struct w1_slave *sl) +{ +#ifdef CONFIG_W1_F23_CRC + kfree(sl->family_data); + sl->family_data = NULL; +#endif /* CONFIG_W1_F23_CRC */ + sysfs_remove_bin_file(&sl->dev.kobj, &w1_f23_bin_attr); +} + +static struct w1_family_ops w1_f23_fops = { + .add_slave = w1_f23_add_slave, + .remove_slave = w1_f23_remove_slave, +}; + +static struct w1_family w1_family_23 = { + .fid = W1_EEPROM_DS2433, + .fops = &w1_f23_fops, +}; + +static int __init w1_f23_init(void) +{ + return w1_register_family(&w1_family_23); +} + +static void __exit w1_f23_fini(void) +{ + w1_unregister_family(&w1_family_23); +} + +module_init(w1_f23_init); +module_exit(w1_f23_fini); diff --git a/drivers/w1/slaves/w1_smem.c b/drivers/w1/slaves/w1_smem.c new file mode 100644 index 00000000000..c6d3be54f94 --- /dev/null +++ b/drivers/w1/slaves/w1_smem.c @@ -0,0 +1,71 @@ +/* + * w1_smem.c + * + * Copyright (c) 2004 Evgeniy Polyakov + * + * + * This program is free software; you can redistribute it and/or modify + * it under the smems of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include + +#include +#include +#include +#include +#include + +#include "../w1.h" +#include "../w1_io.h" +#include "../w1_int.h" +#include "../w1_family.h" + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Evgeniy Polyakov "); +MODULE_DESCRIPTION("Driver for 1-wire Dallas network protocol, 64bit memory family."); + +static struct w1_family w1_smem_family_01 = { + .fid = W1_FAMILY_SMEM_01, +}; + +static struct w1_family w1_smem_family_81 = { + .fid = W1_FAMILY_SMEM_81, +}; + +static int __init w1_smem_init(void) +{ + int err; + + err = w1_register_family(&w1_smem_family_01); + if (err) + return err; + + err = w1_register_family(&w1_smem_family_81); + if (err) { + w1_unregister_family(&w1_smem_family_01); + return err; + } + + return 0; +} + +static void __exit w1_smem_fini(void) +{ + w1_unregister_family(&w1_smem_family_01); + w1_unregister_family(&w1_smem_family_81); +} + +module_init(w1_smem_init); +module_exit(w1_smem_fini); diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c new file mode 100644 index 00000000000..536d16d78de --- /dev/null +++ b/drivers/w1/slaves/w1_therm.c @@ -0,0 +1,268 @@ +/* + * w1_therm.c + * + * Copyright (c) 2004 Evgeniy Polyakov + * + * + * This program is free software; you can redistribute it and/or modify + * it under the therms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include + +#include +#include +#include +#include +#include +#include + +#include "../w1.h" +#include "../w1_io.h" +#include "../w1_int.h" +#include "../w1_family.h" + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Evgeniy Polyakov "); +MODULE_DESCRIPTION("Driver for 1-wire Dallas network protocol, temperature family."); + +static u8 bad_roms[][9] = { + {0xaa, 0x00, 0x4b, 0x46, 0xff, 0xff, 0x0c, 0x10, 0x87}, + {} + }; + +static ssize_t w1_therm_read_bin(struct kobject *, char *, loff_t, size_t); + +static struct bin_attribute w1_therm_bin_attr = { + .attr = { + .name = "w1_slave", + .mode = S_IRUGO, + .owner = THIS_MODULE, + }, + .size = W1_SLAVE_DATA_SIZE, + .read = w1_therm_read_bin, +}; + +static int w1_therm_add_slave(struct w1_slave *sl) +{ + return sysfs_create_bin_file(&sl->dev.kobj, &w1_therm_bin_attr); +} + +static void w1_therm_remove_slave(struct w1_slave *sl) +{ + sysfs_remove_bin_file(&sl->dev.kobj, &w1_therm_bin_attr); +} + +static struct w1_family_ops w1_therm_fops = { + .add_slave = w1_therm_add_slave, + .remove_slave = w1_therm_remove_slave, +}; + +static struct w1_family w1_therm_family_DS18S20 = { + .fid = W1_THERM_DS18S20, + .fops = &w1_therm_fops, +}; + +static struct w1_family w1_therm_family_DS18B20 = { + .fid = W1_THERM_DS18B20, + .fops = &w1_therm_fops, +}; + +static struct w1_family w1_therm_family_DS1822 = { + .fid = W1_THERM_DS1822, + .fops = &w1_therm_fops, +}; + +struct w1_therm_family_converter +{ + u8 broken; + u16 reserved; + struct w1_family *f; + int (*convert)(u8 rom[9]); +}; + +static inline int w1_DS18B20_convert_temp(u8 rom[9]); +static inline int w1_DS18S20_convert_temp(u8 rom[9]); + +static struct w1_therm_family_converter w1_therm_families[] = { + { + .f = &w1_therm_family_DS18S20, + .convert = w1_DS18S20_convert_temp + }, + { + .f = &w1_therm_family_DS1822, + .convert = w1_DS18B20_convert_temp + }, + { + .f = &w1_therm_family_DS18B20, + .convert = w1_DS18B20_convert_temp + }, +}; + +static inline int w1_DS18B20_convert_temp(u8 rom[9]) +{ + int t = (rom[1] << 8) | rom[0]; + t /= 16; + return t; +} + +static inline int w1_DS18S20_convert_temp(u8 rom[9]) +{ + int t, h; + + if (!rom[7]) + return 0; + + if (rom[1] == 0) + t = ((s32)rom[0] >> 1)*1000; + else + t = 1000*(-1*(s32)(0x100-rom[0]) >> 1); + + t -= 250; + h = 1000*((s32)rom[7] - (s32)rom[6]); + h /= (s32)rom[7]; + t += h; + + return t; +} + +static inline int w1_convert_temp(u8 rom[9], u8 fid) +{ + int i; + + for (i=0; ifid == fid) + return w1_therm_families[i].convert(rom); + + return 0; +} + +static int w1_therm_check_rom(u8 rom[9]) +{ + int i; + + for (i=0; imaster; + u8 rom[9], crc, verdict; + int i, max_trying = 10; + + atomic_inc(&sl->refcnt); + smp_mb__after_atomic_inc(); + if (down_interruptible(&sl->master->mutex)) { + count = 0; + goto out_dec; + } + + if (off > W1_SLAVE_DATA_SIZE) { + count = 0; + goto out; + } + if (off + count > W1_SLAVE_DATA_SIZE) { + count = 0; + goto out; + } + + memset(buf, 0, count); + memset(rom, 0, sizeof(rom)); + + count = 0; + verdict = 0; + crc = 0; + + while (max_trying--) { + if (!w1_reset_select_slave(sl)) { + int count = 0; + unsigned int tm = 750; + + w1_write_8(dev, W1_CONVERT_TEMP); + + while (tm) { + tm = msleep_interruptible(tm); + if (signal_pending(current)) + flush_signals(current); + } + + if (!w1_reset_select_slave(sl)) { + + w1_write_8(dev, W1_READ_SCRATCHPAD); + if ((count = w1_read_block(dev, rom, 9)) != 9) { + dev_warn(&dev->dev, "w1_read_block() returned %d instead of 9.\n", count); + } + + crc = w1_calc_crc8(rom, 8); + + if (rom[8] == crc && rom[0]) + verdict = 1; + } + } + + if (!w1_therm_check_rom(rom)) + break; + } + + for (i = 0; i < 9; ++i) + count += sprintf(buf + count, "%02x ", rom[i]); + count += sprintf(buf + count, ": crc=%02x %s\n", + crc, (verdict) ? "YES" : "NO"); + if (verdict) + memcpy(sl->rom, rom, sizeof(sl->rom)); + else + dev_warn(&dev->dev, "18S20 doesn't respond to CONVERT_TEMP.\n"); + + for (i = 0; i < 9; ++i) + count += sprintf(buf + count, "%02x ", sl->rom[i]); + + count += sprintf(buf + count, "t=%d\n", w1_convert_temp(rom, sl->family->fid)); +out: + up(&dev->mutex); +out_dec: + smp_mb__before_atomic_inc(); + atomic_dec(&sl->refcnt); + + return count; +} + +static int __init w1_therm_init(void) +{ + int err, i; + + for (i=0; i