From 181d683d752c432635eda0f182ee71548c1f1820 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 16 Sep 2009 01:06:43 -0700 Subject: Input: libps2 - additional locking for i8042 ports The serio ports on i8042 are not completely isolated; while we provide enough locking to ensure proper serialization when accessing control and data registers AUX and KBD ports can still have an effect on each other on PS/2 protocol level. The most prominent effect is that issuing a command for the device connected to one port may cause abort of the command currently executing by the device connected to another port. Since i8042 nor serio subsystem are not aware of the details of the PS/2 protocol (length of the commands and their replies and so on) the locking should be done on libps2 level by adding special handling when we see that we are dealing with serio port on i8042. Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/sentelic.c | 18 ++++++++++-------- drivers/input/serio/i8042.c | 41 +++++++++++++++++++++++++++++++++++++++++ drivers/input/serio/libps2.c | 28 ++++++++++++++++++++++++---- drivers/leds/leds-clevo-mail.c | 8 ++++++++ drivers/platform/x86/acer-wmi.c | 2 ++ 5 files changed, 85 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c index 84e2fc04d11..f84cbd97c88 100644 --- a/drivers/input/mouse/sentelic.c +++ b/drivers/input/mouse/sentelic.c @@ -92,7 +92,8 @@ static int fsp_reg_read(struct psmouse *psmouse, int reg_addr, int *reg_val) */ ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE); psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); - mutex_lock(&ps2dev->cmd_mutex); + + ps2_begin_command(ps2dev); if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0) goto out; @@ -126,7 +127,7 @@ static int fsp_reg_read(struct psmouse *psmouse, int reg_addr, int *reg_val) rc = 0; out: - mutex_unlock(&ps2dev->cmd_mutex); + ps2_end_command(ps2dev); ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE); psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); dev_dbg(&ps2dev->serio->dev, "READ REG: 0x%02x is 0x%02x (rc = %d)\n", @@ -140,7 +141,7 @@ static int fsp_reg_write(struct psmouse *psmouse, int reg_addr, int reg_val) unsigned char v; int rc = -1; - mutex_lock(&ps2dev->cmd_mutex); + ps2_begin_command(ps2dev); if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0) goto out; @@ -179,7 +180,7 @@ static int fsp_reg_write(struct psmouse *psmouse, int reg_addr, int reg_val) rc = 0; out: - mutex_unlock(&ps2dev->cmd_mutex); + ps2_end_command(ps2dev); dev_dbg(&ps2dev->serio->dev, "WRITE REG: 0x%02x to 0x%02x (rc = %d)\n", reg_addr, reg_val, rc); return rc; @@ -214,7 +215,8 @@ static int fsp_page_reg_read(struct psmouse *psmouse, int *reg_val) ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE); psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); - mutex_lock(&ps2dev->cmd_mutex); + + ps2_begin_command(ps2dev); if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0) goto out; @@ -236,7 +238,7 @@ static int fsp_page_reg_read(struct psmouse *psmouse, int *reg_val) rc = 0; out: - mutex_unlock(&ps2dev->cmd_mutex); + ps2_end_command(ps2dev); ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE); psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); dev_dbg(&ps2dev->serio->dev, "READ PAGE REG: 0x%02x (rc = %d)\n", @@ -250,7 +252,7 @@ static int fsp_page_reg_write(struct psmouse *psmouse, int reg_val) unsigned char v; int rc = -1; - mutex_lock(&ps2dev->cmd_mutex); + ps2_begin_command(ps2dev); if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0) goto out; @@ -275,7 +277,7 @@ static int fsp_page_reg_write(struct psmouse *psmouse, int reg_val) rc = 0; out: - mutex_unlock(&ps2dev->cmd_mutex); + ps2_end_command(ps2dev); dev_dbg(&ps2dev->serio->dev, "WRITE PAGE REG: to 0x%02x (rc = %d)\n", reg_val, rc); return rc; diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index eb3ff94af58..bc56e52b945 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -87,8 +87,22 @@ static bool i8042_bypass_aux_irq_test; #include "i8042.h" +/* + * i8042_lock protects serialization between i8042_command and + * the interrupt handler. + */ static DEFINE_SPINLOCK(i8042_lock); +/* + * Writers to AUX and KBD ports as well as users issuing i8042_command + * directly should acquire i8042_mutex (by means of calling + * i8042_lock_chip() and i8042_unlock_ship() helpers) to ensure that + * they do not disturb each other (unfortunately in many i8042 + * implementations write to one of the ports will immediately abort + * command that is being processed by another port). + */ +static DEFINE_MUTEX(i8042_mutex); + struct i8042_port { struct serio *serio; int irq; @@ -113,6 +127,18 @@ static struct platform_device *i8042_platform_device; static irqreturn_t i8042_interrupt(int irq, void *dev_id); +void i8042_lock_chip(void) +{ + mutex_lock(&i8042_mutex); +} +EXPORT_SYMBOL(i8042_lock_chip); + +void i8042_unlock_chip(void) +{ + mutex_unlock(&i8042_mutex); +} +EXPORT_SYMBOL(i8042_unlock_chip); + /* * The i8042_wait_read() and i8042_wait_write functions wait for the i8042 to * be ready for reading values from it / writing values to it. @@ -1161,6 +1187,21 @@ static void __devexit i8042_unregister_ports(void) } } +/* + * Checks whether port belongs to i8042 controller. + */ +bool i8042_check_port_owner(const struct serio *port) +{ + int i; + + for (i = 0; i < I8042_NUM_PORTS; i++) + if (i8042_ports[i].serio == port) + return true; + + return false; +} +EXPORT_SYMBOL(i8042_check_port_owner); + static void i8042_free_irqs(void) { if (i8042_aux_irq_registered) diff --git a/drivers/input/serio/libps2.c b/drivers/input/serio/libps2.c index 3a95b508bf2..769ba65a585 100644 --- a/drivers/input/serio/libps2.c +++ b/drivers/input/serio/libps2.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include @@ -54,6 +55,24 @@ int ps2_sendbyte(struct ps2dev *ps2dev, unsigned char byte, int timeout) } EXPORT_SYMBOL(ps2_sendbyte); +void ps2_begin_command(struct ps2dev *ps2dev) +{ + mutex_lock(&ps2dev->cmd_mutex); + + if (i8042_check_port_owner(ps2dev->serio)) + i8042_lock_chip(); +} +EXPORT_SYMBOL(ps2_begin_command); + +void ps2_end_command(struct ps2dev *ps2dev) +{ + if (i8042_check_port_owner(ps2dev->serio)) + i8042_unlock_chip(); + + mutex_unlock(&ps2dev->cmd_mutex); +} +EXPORT_SYMBOL(ps2_end_command); + /* * ps2_drain() waits for device to transmit requested number of bytes * and discards them. @@ -66,7 +85,7 @@ void ps2_drain(struct ps2dev *ps2dev, int maxbytes, int timeout) maxbytes = sizeof(ps2dev->cmdbuf); } - mutex_lock(&ps2dev->cmd_mutex); + ps2_begin_command(ps2dev); serio_pause_rx(ps2dev->serio); ps2dev->flags = PS2_FLAG_CMD; @@ -76,7 +95,8 @@ void ps2_drain(struct ps2dev *ps2dev, int maxbytes, int timeout) wait_event_timeout(ps2dev->wait, !(ps2dev->flags & PS2_FLAG_CMD), msecs_to_jiffies(timeout)); - mutex_unlock(&ps2dev->cmd_mutex); + + ps2_end_command(ps2dev); } EXPORT_SYMBOL(ps2_drain); @@ -237,9 +257,9 @@ int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command) { int rc; - mutex_lock(&ps2dev->cmd_mutex); + ps2_begin_command(ps2dev); rc = __ps2_command(ps2dev, param, command); - mutex_unlock(&ps2dev->cmd_mutex); + ps2_end_command(ps2dev); return rc; } diff --git a/drivers/leds/leds-clevo-mail.c b/drivers/leds/leds-clevo-mail.c index 1813c84ea5f..f2242db5401 100644 --- a/drivers/leds/leds-clevo-mail.c +++ b/drivers/leds/leds-clevo-mail.c @@ -93,6 +93,8 @@ static struct dmi_system_id __initdata mail_led_whitelist[] = { static void clevo_mail_led_set(struct led_classdev *led_cdev, enum led_brightness value) { + i8042_lock_chip(); + if (value == LED_OFF) i8042_command(NULL, CLEVO_MAIL_LED_OFF); else if (value <= LED_HALF) @@ -100,6 +102,8 @@ static void clevo_mail_led_set(struct led_classdev *led_cdev, else i8042_command(NULL, CLEVO_MAIL_LED_BLINK_1HZ); + i8042_unlock_chip(); + } static int clevo_mail_led_blink(struct led_classdev *led_cdev, @@ -108,6 +112,8 @@ static int clevo_mail_led_blink(struct led_classdev *led_cdev, { int status = -EINVAL; + i8042_lock_chip(); + if (*delay_on == 0 /* ms */ && *delay_off == 0 /* ms */) { /* Special case: the leds subsystem requested us to * chose one user friendly blinking of the LED, and @@ -135,6 +141,8 @@ static int clevo_mail_led_blink(struct led_classdev *led_cdev, *delay_on, *delay_off); } + i8042_unlock_chip(); + return status; } diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index fb45f5ee8df..454970d2d70 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -746,7 +746,9 @@ static acpi_status WMID_set_u32(u32 value, u32 cap, struct wmi_interface *iface) return AE_BAD_PARAMETER; if (quirks->mailled == 1) { param = value ? 0x92 : 0x93; + i8042_lock_chip(); i8042_command(¶m, 0x1059); + i8042_unlock_chip(); return 0; } break; -- cgit v1.2.3 From ffd0db97196c1057f09c2ab42dd5b30e94e511d9 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 16 Sep 2009 01:06:43 -0700 Subject: Input: add generic suspend and resume for input devices Automatically turn off leds and sound effects as part of suspend process and restore led state, sounds and repeat rate at resume. Signed-off-by: Dmitry Torokhov --- drivers/input/input.c | 64 ++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 63 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/input.c b/drivers/input/input.c index 7c237e6ac71..b8ed4294fcc 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -11,6 +11,7 @@ */ #include +#include #include #include #include @@ -514,7 +515,7 @@ static void input_disconnect_device(struct input_dev *dev) * that there are no threads in the middle of input_open_device() */ mutex_lock(&dev->mutex); - dev->going_away = 1; + dev->going_away = true; mutex_unlock(&dev->mutex); spin_lock_irq(&dev->event_lock); @@ -1259,10 +1260,71 @@ static int input_dev_uevent(struct device *device, struct kobj_uevent_env *env) return 0; } +#define INPUT_DO_TOGGLE(dev, type, bits, on) \ + do { \ + int i; \ + if (!test_bit(EV_##type, dev->evbit)) \ + break; \ + for (i = 0; i < type##_MAX; i++) { \ + if (!test_bit(i, dev->bits##bit) || \ + !test_bit(i, dev->bits)) \ + continue; \ + dev->event(dev, EV_##type, i, on); \ + } \ + } while (0) + +static void input_dev_reset(struct input_dev *dev, bool activate) +{ + if (!dev->event) + return; + + INPUT_DO_TOGGLE(dev, LED, led, activate); + INPUT_DO_TOGGLE(dev, SND, snd, activate); + + if (activate && test_bit(EV_REP, dev->evbit)) { + dev->event(dev, EV_REP, REP_PERIOD, dev->rep[REP_PERIOD]); + dev->event(dev, EV_REP, REP_DELAY, dev->rep[REP_DELAY]); + } +} + +#ifdef CONFIG_PM +static int input_dev_suspend(struct device *dev) +{ + struct input_dev *input_dev = to_input_dev(dev); + + mutex_lock(&input_dev->mutex); + input_dev_reset(input_dev, false); + mutex_unlock(&input_dev->mutex); + + return 0; +} + +static int input_dev_resume(struct device *dev) +{ + struct input_dev *input_dev = to_input_dev(dev); + + mutex_lock(&input_dev->mutex); + input_dev_reset(input_dev, true); + mutex_unlock(&input_dev->mutex); + + return 0; +} + +static const struct dev_pm_ops input_dev_pm_ops = { + .suspend = input_dev_suspend, + .resume = input_dev_resume, + .poweroff = input_dev_suspend, + .restore = input_dev_resume, +}; +#endif /* CONFIG_PM */ + static struct device_type input_dev_type = { .groups = input_dev_attr_groups, .release = input_dev_release, .uevent = input_dev_uevent, +#ifdef CONFIG_PM + .pm = &input_dev_pm_ops, +#endif }; static char *input_nodename(struct device *dev) -- cgit v1.2.3 From 9605fb48e1998935a5ee70c965f90ad1ac023add Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 16 Sep 2009 01:06:43 -0700 Subject: Input: atkbd - rely on input core to restore state on resume Now that input core takes care of restoring state of input devices upon resume we don't need to do anything special here. Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/atkbd.c | 25 ------------------------- 1 file changed, 25 deletions(-) (limited to 'drivers') diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index c9523e48c6a..904d4c9fbf2 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -773,23 +773,6 @@ static int atkbd_select_set(struct atkbd *atkbd, int target_set, int allow_extra static int atkbd_activate(struct atkbd *atkbd) { struct ps2dev *ps2dev = &atkbd->ps2dev; - unsigned char param[1]; - -/* - * Set the LEDs to a defined state. - */ - - param[0] = 0; - if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS)) - return -1; - -/* - * Set autorepeat to fastest possible. - */ - - param[0] = 0; - if (ps2_command(ps2dev, param, ATKBD_CMD_SETREP)) - return -1; /* * Enable the keyboard to receive keystrokes. @@ -1158,14 +1141,6 @@ static int atkbd_reconnect(struct serio *serio) return -1; atkbd_activate(atkbd); - -/* - * Restore repeat rate and LEDs (that were reset by atkbd_activate) - * to pre-resume state - */ - if (!atkbd->softrepeat) - atkbd_set_repeat_rate(atkbd); - atkbd_set_leds(atkbd); } atkbd_enable(atkbd); -- cgit v1.2.3 From 36fb25277825b6ef6acd57091e6aaa6dc8a4c203 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Wed, 16 Sep 2009 01:06:42 -0700 Subject: Input: ad7879 - add support for AD7889 The AD7889 is a new part but 100% software compatible with the AD7879, so add it to the id_table and help text. Signed-off-by: Michael Hennerich Signed-off-by: Mike Frysinger Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/Kconfig | 6 +++--- drivers/input/touchscreen/ad7879.c | 6 ++++-- 2 files changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 87a1ae63bcc..5a252d449e5 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -48,8 +48,8 @@ config TOUCHSCREEN_AD7879_I2C select TOUCHSCREEN_AD7879 help Say Y here if you have a touchscreen interface using the - AD7879-1 controller, and your board-specific initialization - code includes that in its table of I2C devices. + AD7879-1/AD7889-1 controller, and your board-specific + initialization code includes that in its table of I2C devices. If unsure, say N (but it's safe to say "Y"). @@ -62,7 +62,7 @@ config TOUCHSCREEN_AD7879_SPI select TOUCHSCREEN_AD7879 help Say Y here if you have a touchscreen interface using the - AD7879 controller, and your board-specific initialization + AD7879/AD7889 controller, and your board-specific initialization code includes that in its table of SPI devices. If unsure, say N (but it's safe to say "Y"). diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c index 5d8a7039880..806464177e0 100644 --- a/drivers/input/touchscreen/ad7879.c +++ b/drivers/input/touchscreen/ad7879.c @@ -1,7 +1,8 @@ /* - * Copyright (C) 2008 Michael Hennerich, Analog Devices Inc. + * Copyright (C) 2008-2009 Michael Hennerich, Analog Devices Inc. * - * Description: AD7879 based touchscreen, and GPIO driver (I2C/SPI Interface) + * Description: AD7879/AD7889 based touchscreen, and GPIO driver + * (I2C/SPI Interface) * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * @@ -747,6 +748,7 @@ static int __devexit ad7879_remove(struct i2c_client *client) static const struct i2c_device_id ad7879_id[] = { { "ad7879", 0 }, + { "ad7889", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, ad7879_id); -- cgit v1.2.3 From 30b37131aa63f4f73ebc48a026666448e5907255 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 16 Sep 2009 01:06:42 -0700 Subject: Input: synaptics_i2c - switch to using __cancel_delayed_work() cancel_delayed_work() may spin and therefore should not be used in interrupt contexts. Acked-by: Mike Rapoport Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/synaptics_i2c.c | 51 +++++++++++++++++++++++-------------- 1 file changed, 32 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/input/mouse/synaptics_i2c.c b/drivers/input/mouse/synaptics_i2c.c index eac9fdde7ee..7283c78044a 100644 --- a/drivers/input/mouse/synaptics_i2c.c +++ b/drivers/input/mouse/synaptics_i2c.c @@ -203,7 +203,7 @@ MODULE_PARM_DESC(no_filter, "No Filter. Default = 0 (off)"); * and the irq configuration should be set to Falling Edge Trigger */ /* Control IRQ / Polling option */ -static int polling_req; +static bool polling_req; module_param(polling_req, bool, 0444); MODULE_PARM_DESC(polling_req, "Request Polling. Default = 0 (use irq)"); @@ -217,6 +217,7 @@ struct synaptics_i2c { struct i2c_client *client; struct input_dev *input; struct delayed_work dwork; + spinlock_t lock; int no_data_count; int no_decel_param; int reduce_report_param; @@ -366,17 +367,28 @@ static bool synaptics_i2c_get_input(struct synaptics_i2c *touch) return xy_delta || gesture; } -static irqreturn_t synaptics_i2c_irq(int irq, void *dev_id) +static void synaptics_i2c_reschedule_work(struct synaptics_i2c *touch, + unsigned long delay) { - struct synaptics_i2c *touch = dev_id; + unsigned long flags; + + spin_lock_irqsave(&touch->lock, flags); /* - * We want to have the work run immediately but it might have - * already been scheduled with a delay, that's why we have to - * cancel it first. + * If work is already scheduled then subsequent schedules will not + * change the scheduled time that's why we have to cancel it first. */ - cancel_delayed_work(&touch->dwork); - schedule_delayed_work(&touch->dwork, 0); + __cancel_delayed_work(&touch->dwork); + schedule_delayed_work(&touch->dwork, delay); + + spin_unlock_irqrestore(&touch->lock, flags); +} + +static irqreturn_t synaptics_i2c_irq(int irq, void *dev_id) +{ + struct synaptics_i2c *touch = dev_id; + + synaptics_i2c_reschedule_work(touch, 0); return IRQ_HANDLED; } @@ -452,7 +464,7 @@ static void synaptics_i2c_work_handler(struct work_struct *work) * We poll the device once in THREAD_IRQ_SLEEP_SECS and * if error is detected, we try to reset and reconfigure the touchpad. */ - schedule_delayed_work(&touch->dwork, delay); + synaptics_i2c_reschedule_work(touch, delay); } static int synaptics_i2c_open(struct input_dev *input) @@ -465,8 +477,8 @@ static int synaptics_i2c_open(struct input_dev *input) return ret; if (polling_req) - schedule_delayed_work(&touch->dwork, - msecs_to_jiffies(NO_DATA_SLEEP_MSECS)); + synaptics_i2c_reschedule_work(touch, + msecs_to_jiffies(NO_DATA_SLEEP_MSECS)); return 0; } @@ -521,6 +533,7 @@ struct synaptics_i2c *synaptics_i2c_touch_create(struct i2c_client *client) touch->scan_rate_param = scan_rate; set_scan_rate(touch, scan_rate); INIT_DELAYED_WORK(&touch->dwork, synaptics_i2c_work_handler); + spin_lock_init(&touch->lock); return touch; } @@ -535,14 +548,12 @@ static int __devinit synaptics_i2c_probe(struct i2c_client *client, if (!touch) return -ENOMEM; - i2c_set_clientdata(client, touch); - ret = synaptics_i2c_reset_config(client); if (ret) goto err_mem_free; if (client->irq < 1) - polling_req = 1; + polling_req = true; touch->input = input_allocate_device(); if (!touch->input) { @@ -563,7 +574,7 @@ static int __devinit synaptics_i2c_probe(struct i2c_client *client, dev_warn(&touch->client->dev, "IRQ request failed: %d, " "falling back to polling\n", ret); - polling_req = 1; + polling_req = true; synaptics_i2c_reg_set(touch->client, INTERRUPT_EN_REG, 0); } @@ -580,12 +591,14 @@ static int __devinit synaptics_i2c_probe(struct i2c_client *client, "Input device register failed: %d\n", ret); goto err_input_free; } + + i2c_set_clientdata(client, touch); + return 0; err_input_free: input_free_device(touch->input); err_mem_free: - i2c_set_clientdata(client, NULL); kfree(touch); return ret; @@ -596,7 +609,7 @@ static int __devexit synaptics_i2c_remove(struct i2c_client *client) struct synaptics_i2c *touch = i2c_get_clientdata(client); if (!polling_req) - free_irq(touch->client->irq, touch); + free_irq(client->irq, touch); input_unregister_device(touch->input); i2c_set_clientdata(client, NULL); @@ -627,8 +640,8 @@ static int synaptics_i2c_resume(struct i2c_client *client) if (ret) return ret; - schedule_delayed_work(&touch->dwork, - msecs_to_jiffies(NO_DATA_SLEEP_MSECS)); + synaptics_i2c_reschedule_work(touch, + msecs_to_jiffies(NO_DATA_SLEEP_MSECS)); return 0; } -- cgit v1.2.3 From 3b0a9ce0a6918e881c3f44bf1fc2194a8d019104 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 16 Sep 2009 01:06:42 -0700 Subject: Input: dm355evm_keys - remove dm355evm_keys_hardirq The genirq already provides default hard IRQ handler for threaded IRQs, no need to implement our own here. Signed-off-by: Dmitry Torokhov --- drivers/input/misc/dm355evm_keys.c | 26 +++++++++----------------- 1 file changed, 9 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/input/misc/dm355evm_keys.c b/drivers/input/misc/dm355evm_keys.c index 0918acae584..f2b67dc81d8 100644 --- a/drivers/input/misc/dm355evm_keys.c +++ b/drivers/input/misc/dm355evm_keys.c @@ -96,7 +96,13 @@ static struct { { 0x3169, KEY_PAUSE, }, }; -/* runs in an IRQ thread -- can (and will!) sleep */ +/* + * Because we communicate with the MSP430 using I2C, and all I2C calls + * in Linux sleep, we use a threaded IRQ handler. The IRQ itself is + * active low, but we go through the GPIO controller so we can trigger + * on falling edges and not worry about enabling/disabling the IRQ in + * the keypress handling path. + */ static irqreturn_t dm355evm_keys_irq(int irq, void *_keys) { struct dm355evm_keys *keys = _keys; @@ -171,18 +177,6 @@ static irqreturn_t dm355evm_keys_irq(int irq, void *_keys) return IRQ_HANDLED; } -/* - * Because we communicate with the MSP430 using I2C, and all I2C calls - * in Linux sleep, we use a threaded IRQ handler. The IRQ itself is - * active low, but we go through the GPIO controller so we can trigger - * on falling edges and not worry about enabling/disabling the IRQ in - * the keypress handling path. - */ -static irqreturn_t dm355evm_keys_hardirq(int irq, void *_keys) -{ - return IRQ_WAKE_THREAD; -} - static int dm355evm_setkeycode(struct input_dev *dev, int index, int keycode) { u16 old_keycode; @@ -257,10 +251,8 @@ static int __devinit dm355evm_keys_probe(struct platform_device *pdev) /* REVISIT: flush the event queue? */ - status = request_threaded_irq(keys->irq, - dm355evm_keys_hardirq, dm355evm_keys_irq, - IRQF_TRIGGER_FALLING, - dev_name(&pdev->dev), keys); + status = request_threaded_irq(keys->irq, NULL, dm355evm_keys_irq, + IRQF_TRIGGER_FALLING, dev_name(&pdev->dev), keys); if (status < 0) goto fail1; -- cgit v1.2.3 From 422b552debae59b4bebc0ea5fbb9c809d3dfd057 Mon Sep 17 00:00:00 2001 From: Javier Herrero Date: Wed, 16 Sep 2009 01:06:42 -0700 Subject: Input: add driver for OpenCores Keyboard Controller Driver for the keyboard hardware documented here: http://www.opencores.org/project,keyboardcontroller Signed-off-by: Javier Herrero Signed-off-by: Bryan Wu Signed-off-by: Mike Frysinger Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/Kconfig | 9 ++ drivers/input/keyboard/Makefile | 1 + drivers/input/keyboard/opencores-kbd.c | 180 +++++++++++++++++++++++++++++++++ 3 files changed, 190 insertions(+) create mode 100644 drivers/input/keyboard/opencores-kbd.c (limited to 'drivers') diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 3525c19be42..b14bd3a0714 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -260,6 +260,15 @@ config KEYBOARD_NEWTON To compile this driver as a module, choose M here: the module will be called newtonkbd. +config KEYBOARD_OPENCORES + tristate "OpenCores Keyboard Controller" + help + Say Y here if you want to use the OpenCores Keyboard Controller + http://www.opencores.org/project,keyboardcontroller + + To compile this driver as a module, choose M here; the + module will be called opencores-kbd. + config KEYBOARD_PXA27x tristate "PXA27x/PXA3xx keypad support" depends on PXA27x || PXA3xx diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 8a7a22b3026..ab35ac36111 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -23,6 +23,7 @@ obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o +obj-$(CONFIG_KEYBOARD_OPENCORES) += opencores-kbd.o obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keypad.o obj-$(CONFIG_KEYBOARD_PXA930_ROTARY) += pxa930_rotary.o obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o diff --git a/drivers/input/keyboard/opencores-kbd.c b/drivers/input/keyboard/opencores-kbd.c new file mode 100644 index 00000000000..78cccddbf55 --- /dev/null +++ b/drivers/input/keyboard/opencores-kbd.c @@ -0,0 +1,180 @@ +/* + * OpenCores Keyboard Controller Driver + * http://www.opencores.org/project,keyboardcontroller + * + * Copyright 2007-2009 HV Sistemas S.L. + * + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include +#include +#include +#include + +struct opencores_kbd { + struct input_dev *input; + struct resource *addr_res; + void __iomem *addr; + int irq; + unsigned short keycodes[128]; +}; + +static irqreturn_t opencores_kbd_isr(int irq, void *dev_id) +{ + struct opencores_kbd *opencores_kbd = dev_id; + struct input_dev *input = opencores_kbd->input; + unsigned char c; + + c = readb(opencores_kbd->addr); + input_report_key(input, c & 0x7f, c & 0x80 ? 0 : 1); + input_sync(input); + + return IRQ_HANDLED; +} + +static int __devinit opencores_kbd_probe(struct platform_device *pdev) +{ + struct input_dev *input; + struct opencores_kbd *opencores_kbd; + struct resource *res; + int irq, i, error; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "missing board memory resource\n"); + return -EINVAL; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "missing board IRQ resource\n"); + return -EINVAL; + } + + opencores_kbd = kzalloc(sizeof(*opencores_kbd), GFP_KERNEL); + input = input_allocate_device(); + if (!opencores_kbd || !input) { + dev_err(&pdev->dev, "failed to allocate device structures\n"); + error = -ENOMEM; + goto err_free_mem; + } + + opencores_kbd->addr_res = res; + res = request_mem_region(res->start, resource_size(res), pdev->name); + if (!res) { + dev_err(&pdev->dev, "failed to request I/O memory\n"); + error = -EBUSY; + goto err_free_mem; + } + + opencores_kbd->addr = ioremap(res->start, resource_size(res)); + if (!opencores_kbd->addr) { + dev_err(&pdev->dev, "failed to remap I/O memory\n"); + error = -ENXIO; + goto err_rel_mem; + } + + opencores_kbd->input = input; + opencores_kbd->irq = irq; + + input->name = pdev->name; + input->phys = "opencores-kbd/input0"; + input->dev.parent = &pdev->dev; + + input_set_drvdata(input, opencores_kbd); + + input->id.bustype = BUS_HOST; + input->id.vendor = 0x0001; + input->id.product = 0x0001; + input->id.version = 0x0100; + + input->keycode = opencores_kbd->keycodes; + input->keycodesize = sizeof(opencores_kbd->keycodes[0]); + input->keycodemax = ARRAY_SIZE(opencores_kbd->keycodes); + + __set_bit(EV_KEY, input->evbit); + + for (i = 0; i < ARRAY_SIZE(opencores_kbd->keycodes); i++) { + /* + * OpenCores controller happens to have scancodes match + * our KEY_* definitions. + */ + opencores_kbd->keycodes[i] = i; + __set_bit(opencores_kbd->keycodes[i], input->keybit); + } + __clear_bit(KEY_RESERVED, input->keybit); + + error = request_irq(irq, &opencores_kbd_isr, + IRQF_TRIGGER_RISING, pdev->name, opencores_kbd); + if (error) { + dev_err(&pdev->dev, "unable to claim irq %d\n", irq); + goto err_unmap_mem; + } + + error = input_register_device(input); + if (error) { + dev_err(&pdev->dev, "unable to register input device\n"); + goto err_free_irq; + } + + platform_set_drvdata(pdev, opencores_kbd); + + return 0; + + err_free_irq: + free_irq(irq, opencores_kbd); + err_unmap_mem: + iounmap(opencores_kbd->addr); + err_rel_mem: + release_mem_region(res->start, resource_size(res)); + err_free_mem: + input_free_device(input); + kfree(opencores_kbd); + + return error; +} + +static int __devexit opencores_kbd_remove(struct platform_device *pdev) +{ + struct opencores_kbd *opencores_kbd = platform_get_drvdata(pdev); + + free_irq(opencores_kbd->irq, opencores_kbd); + + iounmap(opencores_kbd->addr); + release_mem_region(opencores_kbd->addr_res->start, + resource_size(opencores_kbd->addr_res)); + input_unregister_device(opencores_kbd->input); + kfree(opencores_kbd); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver opencores_kbd_device_driver = { + .probe = opencores_kbd_probe, + .remove = __devexit_p(opencores_kbd_remove), + .driver = { + .name = "opencores-kbd", + }, +}; + +static int __init opencores_kbd_init(void) +{ + return platform_driver_register(&opencores_kbd_device_driver); +} +module_init(opencores_kbd_init); + +static void __exit opencores_kbd_exit(void) +{ + platform_driver_unregister(&opencores_kbd_device_driver); +} +module_exit(opencores_kbd_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Javier Herrero "); +MODULE_DESCRIPTION("Keyboard driver for OpenCores Keyboard Controller"); -- cgit v1.2.3 From 38e783b38148531c0840ac130b97eb8158f84b48 Mon Sep 17 00:00:00 2001 From: Joonyoung Shim Date: Thu, 17 Sep 2009 22:35:45 -0700 Subject: Input: add touchscreen driver for MELFAS MCS-5000 controller The MELPAS MCS-5000 is the touchscreen controller. The overview of this controller can see at the following website: http://www.melfas.com/product/product01.asp?k_r=eng_ This driver is tested on s3c6410 NCP board and supports only the i2c interface. Signed-off-by: Joonyoung Shim Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/Kconfig | 11 ++ drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/mcs5000_ts.c | 318 +++++++++++++++++++++++++++++++++ 3 files changed, 330 insertions(+) create mode 100644 drivers/input/touchscreen/mcs5000_ts.c (limited to 'drivers') diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 5a252d449e5..6dfb0a2b0a7 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -169,6 +169,17 @@ config TOUCHSCREEN_WACOM_W8001 To compile this driver as a module, choose M here: the module will be called wacom_w8001. +config TOUCHSCREEN_MCS5000 + tristate "MELFAS MCS-5000 touchscreen" + depends on I2C + help + Say Y here if you have the MELFAS MCS-5000 touchscreen controller + chip in your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called mcs5000_ts. config TOUCHSCREEN_MTOUCH tristate "MicroTouch serial touchscreens" diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 3e1c5e0b952..a882ca16506 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_TOUCHSCREEN_EETI) += eeti_ts.o obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o +obj-$(CONFIG_TOUCHSCREEN_MCS5000) += mcs5000_ts.o obj-$(CONFIG_TOUCHSCREEN_MIGOR) += migor_ts.o obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o obj-$(CONFIG_TOUCHSCREEN_MK712) += mk712.o diff --git a/drivers/input/touchscreen/mcs5000_ts.c b/drivers/input/touchscreen/mcs5000_ts.c new file mode 100644 index 00000000000..4c28b89757f --- /dev/null +++ b/drivers/input/touchscreen/mcs5000_ts.c @@ -0,0 +1,318 @@ +/* + * mcs5000_ts.c - Touchscreen driver for MELFAS MCS-5000 controller + * + * Copyright (C) 2009 Samsung Electronics Co.Ltd + * Author: Joonyoung Shim + * + * Based on wm97xx-core.c + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +/* Registers */ +#define MCS5000_TS_STATUS 0x00 +#define STATUS_OFFSET 0 +#define STATUS_NO (0 << STATUS_OFFSET) +#define STATUS_INIT (1 << STATUS_OFFSET) +#define STATUS_SENSING (2 << STATUS_OFFSET) +#define STATUS_COORD (3 << STATUS_OFFSET) +#define STATUS_GESTURE (4 << STATUS_OFFSET) +#define ERROR_OFFSET 4 +#define ERROR_NO (0 << ERROR_OFFSET) +#define ERROR_POWER_ON_RESET (1 << ERROR_OFFSET) +#define ERROR_INT_RESET (2 << ERROR_OFFSET) +#define ERROR_EXT_RESET (3 << ERROR_OFFSET) +#define ERROR_INVALID_REG_ADDRESS (8 << ERROR_OFFSET) +#define ERROR_INVALID_REG_VALUE (9 << ERROR_OFFSET) + +#define MCS5000_TS_OP_MODE 0x01 +#define RESET_OFFSET 0 +#define RESET_NO (0 << RESET_OFFSET) +#define RESET_EXT_SOFT (1 << RESET_OFFSET) +#define OP_MODE_OFFSET 1 +#define OP_MODE_SLEEP (0 << OP_MODE_OFFSET) +#define OP_MODE_ACTIVE (1 << OP_MODE_OFFSET) +#define GESTURE_OFFSET 4 +#define GESTURE_DISABLE (0 << GESTURE_OFFSET) +#define GESTURE_ENABLE (1 << GESTURE_OFFSET) +#define PROXIMITY_OFFSET 5 +#define PROXIMITY_DISABLE (0 << PROXIMITY_OFFSET) +#define PROXIMITY_ENABLE (1 << PROXIMITY_OFFSET) +#define SCAN_MODE_OFFSET 6 +#define SCAN_MODE_INTERRUPT (0 << SCAN_MODE_OFFSET) +#define SCAN_MODE_POLLING (1 << SCAN_MODE_OFFSET) +#define REPORT_RATE_OFFSET 7 +#define REPORT_RATE_40 (0 << REPORT_RATE_OFFSET) +#define REPORT_RATE_80 (1 << REPORT_RATE_OFFSET) + +#define MCS5000_TS_SENS_CTL 0x02 +#define MCS5000_TS_FILTER_CTL 0x03 +#define PRI_FILTER_OFFSET 0 +#define SEC_FILTER_OFFSET 4 + +#define MCS5000_TS_X_SIZE_UPPER 0x08 +#define MCS5000_TS_X_SIZE_LOWER 0x09 +#define MCS5000_TS_Y_SIZE_UPPER 0x0A +#define MCS5000_TS_Y_SIZE_LOWER 0x0B + +#define MCS5000_TS_INPUT_INFO 0x10 +#define INPUT_TYPE_OFFSET 0 +#define INPUT_TYPE_NONTOUCH (0 << INPUT_TYPE_OFFSET) +#define INPUT_TYPE_SINGLE (1 << INPUT_TYPE_OFFSET) +#define INPUT_TYPE_DUAL (2 << INPUT_TYPE_OFFSET) +#define INPUT_TYPE_PALM (3 << INPUT_TYPE_OFFSET) +#define INPUT_TYPE_PROXIMITY (7 << INPUT_TYPE_OFFSET) +#define GESTURE_CODE_OFFSET 3 +#define GESTURE_CODE_NO (0 << GESTURE_CODE_OFFSET) + +#define MCS5000_TS_X_POS_UPPER 0x11 +#define MCS5000_TS_X_POS_LOWER 0x12 +#define MCS5000_TS_Y_POS_UPPER 0x13 +#define MCS5000_TS_Y_POS_LOWER 0x14 +#define MCS5000_TS_Z_POS 0x15 +#define MCS5000_TS_WIDTH 0x16 +#define MCS5000_TS_GESTURE_VAL 0x17 +#define MCS5000_TS_MODULE_REV 0x20 +#define MCS5000_TS_FIRMWARE_VER 0x21 + +/* Touchscreen absolute values */ +#define MCS5000_MAX_XC 0x3ff +#define MCS5000_MAX_YC 0x3ff + +enum mcs5000_ts_read_offset { + READ_INPUT_INFO, + READ_X_POS_UPPER, + READ_X_POS_LOWER, + READ_Y_POS_UPPER, + READ_Y_POS_LOWER, + READ_BLOCK_SIZE, +}; + +/* Each client has this additional data */ +struct mcs5000_ts_data { + struct i2c_client *client; + struct input_dev *input_dev; + const struct mcs5000_ts_platform_data *platform_data; +}; + +static irqreturn_t mcs5000_ts_interrupt(int irq, void *dev_id) +{ + struct mcs5000_ts_data *data = dev_id; + struct i2c_client *client = data->client; + u8 buffer[READ_BLOCK_SIZE]; + int err; + int x; + int y; + + err = i2c_smbus_read_i2c_block_data(client, MCS5000_TS_INPUT_INFO, + READ_BLOCK_SIZE, buffer); + if (err < 0) { + dev_err(&client->dev, "%s, err[%d]\n", __func__, err); + goto out; + } + + switch (buffer[READ_INPUT_INFO]) { + case INPUT_TYPE_NONTOUCH: + input_report_key(data->input_dev, BTN_TOUCH, 0); + input_sync(data->input_dev); + break; + + case INPUT_TYPE_SINGLE: + x = (buffer[READ_X_POS_UPPER] << 8) | buffer[READ_X_POS_LOWER]; + y = (buffer[READ_Y_POS_UPPER] << 8) | buffer[READ_Y_POS_LOWER]; + + input_report_key(data->input_dev, BTN_TOUCH, 1); + input_report_abs(data->input_dev, ABS_X, x); + input_report_abs(data->input_dev, ABS_Y, y); + input_sync(data->input_dev); + break; + + case INPUT_TYPE_DUAL: + /* TODO */ + break; + + case INPUT_TYPE_PALM: + /* TODO */ + break; + + case INPUT_TYPE_PROXIMITY: + /* TODO */ + break; + + default: + dev_err(&client->dev, "Unknown ts input type %d\n", + buffer[READ_INPUT_INFO]); + break; + } + + out: + return IRQ_HANDLED; +} + +static void mcs5000_ts_phys_init(struct mcs5000_ts_data *data) +{ + const struct mcs5000_ts_platform_data *platform_data = + data->platform_data; + struct i2c_client *client = data->client; + + /* Touch reset & sleep mode */ + i2c_smbus_write_byte_data(client, MCS5000_TS_OP_MODE, + RESET_EXT_SOFT | OP_MODE_SLEEP); + + /* Touch size */ + i2c_smbus_write_byte_data(client, MCS5000_TS_X_SIZE_UPPER, + platform_data->x_size >> 8); + i2c_smbus_write_byte_data(client, MCS5000_TS_X_SIZE_LOWER, + platform_data->x_size & 0xff); + i2c_smbus_write_byte_data(client, MCS5000_TS_Y_SIZE_UPPER, + platform_data->y_size >> 8); + i2c_smbus_write_byte_data(client, MCS5000_TS_Y_SIZE_LOWER, + platform_data->y_size & 0xff); + + /* Touch active mode & 80 report rate */ + i2c_smbus_write_byte_data(data->client, MCS5000_TS_OP_MODE, + OP_MODE_ACTIVE | REPORT_RATE_80); +} + +static int __devinit mcs5000_ts_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct mcs5000_ts_data *data; + struct input_dev *input_dev; + int ret; + + if (!client->dev.platform_data) + return -EINVAL; + + data = kzalloc(sizeof(struct mcs5000_ts_data), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!data || !input_dev) { + dev_err(&client->dev, "Failed to allocate memory\n"); + ret = -ENOMEM; + goto err_free_mem; + } + + data->client = client; + data->input_dev = input_dev; + data->platform_data = client->dev.platform_data; + + input_dev->name = "MELPAS MCS-5000 Touchscreen"; + input_dev->id.bustype = BUS_I2C; + input_dev->dev.parent = &client->dev; + + __set_bit(EV_ABS, input_dev->evbit); + __set_bit(EV_KEY, input_dev->evbit); + __set_bit(BTN_TOUCH, input_dev->keybit); + input_set_abs_params(input_dev, ABS_X, 0, MCS5000_MAX_XC, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, MCS5000_MAX_YC, 0, 0); + + input_set_drvdata(input_dev, data); + + if (data->platform_data->cfg_pin) + data->platform_data->cfg_pin(); + + ret = request_threaded_irq(client->irq, NULL, mcs5000_ts_interrupt, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, "mcs5000_ts", data); + + if (ret < 0) { + dev_err(&client->dev, "Failed to register interrupt\n"); + goto err_free_mem; + } + + ret = input_register_device(data->input_dev); + if (ret < 0) + goto err_free_irq; + + mcs5000_ts_phys_init(data); + i2c_set_clientdata(client, data); + + return 0; + +err_free_irq: + free_irq(client->irq, data); +err_free_mem: + input_free_device(input_dev); + kfree(data); + return ret; +} + +static int __devexit mcs5000_ts_remove(struct i2c_client *client) +{ + struct mcs5000_ts_data *data = i2c_get_clientdata(client); + + free_irq(client->irq, data); + input_unregister_device(data->input_dev); + kfree(data); + i2c_set_clientdata(client, NULL); + + return 0; +} + +#ifdef CONFIG_PM +static int mcs5000_ts_suspend(struct i2c_client *client, pm_message_t mesg) +{ + /* Touch sleep mode */ + i2c_smbus_write_byte_data(client, MCS5000_TS_OP_MODE, OP_MODE_SLEEP); + + return 0; +} + +static int mcs5000_ts_resume(struct i2c_client *client) +{ + struct mcs5000_ts_data *data = i2c_get_clientdata(client); + + mcs5000_ts_phys_init(data); + + return 0; +} +#else +#define mcs5000_ts_suspend NULL +#define mcs5000_ts_resume NULL +#endif + +static const struct i2c_device_id mcs5000_ts_id[] = { + { "mcs5000_ts", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mcs5000_ts_id); + +static struct i2c_driver mcs5000_ts_driver = { + .probe = mcs5000_ts_probe, + .remove = __devexit_p(mcs5000_ts_remove), + .suspend = mcs5000_ts_suspend, + .resume = mcs5000_ts_resume, + .driver = { + .name = "mcs5000_ts", + }, + .id_table = mcs5000_ts_id, +}; + +static int __init mcs5000_ts_init(void) +{ + return i2c_add_driver(&mcs5000_ts_driver); +} + +static void __exit mcs5000_ts_exit(void) +{ + i2c_del_driver(&mcs5000_ts_driver); +} + +module_init(mcs5000_ts_init); +module_exit(mcs5000_ts_exit); + +/* Module information */ +MODULE_AUTHOR("Joonyoung Shim "); +MODULE_DESCRIPTION("Touchscreen driver for MELFAS MCS-5000 controller"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 88751dd6ce1fb0627c36c4ab08a40730e5a50d3e Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Thu, 17 Sep 2009 22:39:38 -0700 Subject: Input: add driver for ADP5588 QWERTY I2C Keypad Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu Signed-off-by: Mike Frysinger Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/Kconfig | 10 + drivers/input/keyboard/Makefile | 1 + drivers/input/keyboard/adp5588-keys.c | 361 ++++++++++++++++++++++++++++++++++ 3 files changed, 372 insertions(+) create mode 100644 drivers/input/keyboard/adp5588-keys.c (limited to 'drivers') diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index b14bd3a0714..d615c09a83c 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -24,6 +24,16 @@ config KEYBOARD_AAED2000 To compile this driver as a module, choose M here: the module will be called aaed2000_kbd. +config KEYBOARD_ADP5588 + tristate "ADP5588 I2C QWERTY Keypad and IO Expander" + depends on I2C + help + Say Y here if you want to use a ADP5588 attached to your + system I2C bus. + + To compile this driver as a module, choose M here: the + module will be called adp5588-keys. + config KEYBOARD_AMIGA tristate "Amiga keyboard" depends on AMIGA diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index ab35ac36111..a5c08cdf808 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -5,6 +5,7 @@ # Each configuration option enables a list of files. obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o +obj-$(CONFIG_KEYBOARD_ADP5588) += adp5588-keys.o obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c new file mode 100644 index 00000000000..d48c808d592 --- /dev/null +++ b/drivers/input/keyboard/adp5588-keys.c @@ -0,0 +1,361 @@ +/* + * File: drivers/input/keyboard/adp5588_keys.c + * Description: keypad driver for ADP5588 I2C QWERTY Keypad and IO Expander + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * Copyright (C) 2008-2009 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + + /* Configuration Register1 */ +#define AUTO_INC (1 << 7) +#define GPIEM_CFG (1 << 6) +#define OVR_FLOW_M (1 << 5) +#define INT_CFG (1 << 4) +#define OVR_FLOW_IEN (1 << 3) +#define K_LCK_IM (1 << 2) +#define GPI_IEN (1 << 1) +#define KE_IEN (1 << 0) + +/* Interrupt Status Register */ +#define CMP2_INT (1 << 5) +#define CMP1_INT (1 << 4) +#define OVR_FLOW_INT (1 << 3) +#define K_LCK_INT (1 << 2) +#define GPI_INT (1 << 1) +#define KE_INT (1 << 0) + +/* Key Lock and Event Counter Register */ +#define K_LCK_EN (1 << 6) +#define LCK21 0x30 +#define KEC 0xF + +/* Key Event Register xy */ +#define KEY_EV_PRESSED (1 << 7) +#define KEY_EV_MASK (0x7F) + +#define KP_SEL(x) (0xFFFF >> (16 - x)) /* 2^x-1 */ + +#define KEYP_MAX_EVENT 10 + +/* + * Early pre 4.0 Silicon required to delay readout by at least 25ms, + * since the Event Counter Register updated 25ms after the interrupt + * asserted. + */ +#define WA_DELAYED_READOUT_REVID(rev) ((rev) < 4) + +struct adp5588_kpad { + struct i2c_client *client; + struct input_dev *input; + struct delayed_work work; + unsigned long delay; + unsigned short keycode[ADP5588_KEYMAPSIZE]; +}; + +static int adp5588_read(struct i2c_client *client, u8 reg) +{ + int ret = i2c_smbus_read_byte_data(client, reg); + + if (ret < 0) + dev_err(&client->dev, "Read Error\n"); + + return ret; +} + +static int adp5588_write(struct i2c_client *client, u8 reg, u8 val) +{ + return i2c_smbus_write_byte_data(client, reg, val); +} + +static void adp5588_work(struct work_struct *work) +{ + struct adp5588_kpad *kpad = container_of(work, + struct adp5588_kpad, work.work); + struct i2c_client *client = kpad->client; + int i, key, status, ev_cnt; + + status = adp5588_read(client, INT_STAT); + + if (status & OVR_FLOW_INT) /* Unlikely and should never happen */ + dev_err(&client->dev, "Event Overflow Error\n"); + + if (status & KE_INT) { + ev_cnt = adp5588_read(client, KEY_LCK_EC_STAT) & KEC; + if (ev_cnt) { + for (i = 0; i < ev_cnt; i++) { + key = adp5588_read(client, Key_EVENTA + i); + input_report_key(kpad->input, + kpad->keycode[(key & KEY_EV_MASK) - 1], + key & KEY_EV_PRESSED); + } + input_sync(kpad->input); + } + } + adp5588_write(client, INT_STAT, status); /* Status is W1C */ +} + +static irqreturn_t adp5588_irq(int irq, void *handle) +{ + struct adp5588_kpad *kpad = handle; + + /* + * use keventd context to read the event fifo registers + * Schedule readout at least 25ms after notification for + * REVID < 4 + */ + + schedule_delayed_work(&kpad->work, kpad->delay); + + return IRQ_HANDLED; +} + +static int __devinit adp5588_setup(struct i2c_client *client) +{ + struct adp5588_kpad_platform_data *pdata = client->dev.platform_data; + int i, ret; + + ret = adp5588_write(client, KP_GPIO1, KP_SEL(pdata->rows)); + ret |= adp5588_write(client, KP_GPIO2, KP_SEL(pdata->cols) & 0xFF); + ret |= adp5588_write(client, KP_GPIO3, KP_SEL(pdata->cols) >> 8); + + if (pdata->en_keylock) { + ret |= adp5588_write(client, UNLOCK1, pdata->unlock_key1); + ret |= adp5588_write(client, UNLOCK2, pdata->unlock_key2); + ret |= adp5588_write(client, KEY_LCK_EC_STAT, K_LCK_EN); + } + + for (i = 0; i < KEYP_MAX_EVENT; i++) + ret |= adp5588_read(client, Key_EVENTA); + + ret |= adp5588_write(client, INT_STAT, CMP2_INT | CMP1_INT | + OVR_FLOW_INT | K_LCK_INT | + GPI_INT | KE_INT); /* Status is W1C */ + + ret |= adp5588_write(client, CFG, INT_CFG | OVR_FLOW_IEN | KE_IEN); + + if (ret < 0) { + dev_err(&client->dev, "Write Error\n"); + return ret; + } + + return 0; +} + +static int __devinit adp5588_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adp5588_kpad *kpad; + struct adp5588_kpad_platform_data *pdata = client->dev.platform_data; + struct input_dev *input; + unsigned int revid; + int ret, i; + int error; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_err(&client->dev, "SMBUS Byte Data not Supported\n"); + return -EIO; + } + + if (!pdata) { + dev_err(&client->dev, "no platform data?\n"); + return -EINVAL; + } + + if (!pdata->rows || !pdata->cols || !pdata->keymap) { + dev_err(&client->dev, "no rows, cols or keymap from pdata\n"); + return -EINVAL; + } + + if (pdata->keymapsize != ADP5588_KEYMAPSIZE) { + dev_err(&client->dev, "invalid keymapsize\n"); + return -EINVAL; + } + + if (!client->irq) { + dev_err(&client->dev, "no IRQ?\n"); + return -EINVAL; + } + + kpad = kzalloc(sizeof(*kpad), GFP_KERNEL); + input = input_allocate_device(); + if (!kpad || !input) { + error = -ENOMEM; + goto err_free_mem; + } + + kpad->client = client; + kpad->input = input; + INIT_DELAYED_WORK(&kpad->work, adp5588_work); + + ret = adp5588_read(client, DEV_ID); + if (ret < 0) { + error = ret; + goto err_free_mem; + } + + revid = (u8) ret & ADP5588_DEVICE_ID_MASK; + if (WA_DELAYED_READOUT_REVID(revid)) + kpad->delay = msecs_to_jiffies(30); + + input->name = client->name; + input->phys = "adp5588-keys/input0"; + input->dev.parent = &client->dev; + + input_set_drvdata(input, kpad); + + input->id.bustype = BUS_I2C; + input->id.vendor = 0x0001; + input->id.product = 0x0001; + input->id.version = revid; + + input->keycodesize = sizeof(kpad->keycode[0]); + input->keycodemax = pdata->keymapsize; + input->keycode = kpad->keycode; + + memcpy(kpad->keycode, pdata->keymap, + pdata->keymapsize * input->keycodesize); + + /* setup input device */ + __set_bit(EV_KEY, input->evbit); + + if (pdata->repeat) + __set_bit(EV_REP, input->evbit); + + for (i = 0; i < input->keycodemax; i++) + __set_bit(kpad->keycode[i] & KEY_MAX, input->keybit); + __clear_bit(KEY_RESERVED, input->keybit); + + error = input_register_device(input); + if (error) { + dev_err(&client->dev, "unable to register input device\n"); + goto err_free_mem; + } + + error = request_irq(client->irq, adp5588_irq, + IRQF_TRIGGER_FALLING | IRQF_DISABLED, + client->dev.driver->name, kpad); + if (error) { + dev_err(&client->dev, "irq %d busy?\n", client->irq); + goto err_unreg_dev; + } + + error = adp5588_setup(client); + if (error) + goto err_free_irq; + + device_init_wakeup(&client->dev, 1); + i2c_set_clientdata(client, kpad); + + dev_info(&client->dev, "Rev.%d keypad, irq %d\n", revid, client->irq); + return 0; + + err_free_irq: + free_irq(client->irq, kpad); + err_unreg_dev: + input_unregister_device(input); + input = NULL; + err_free_mem: + input_free_device(input); + kfree(kpad); + + return error; +} + +static int __devexit adp5588_remove(struct i2c_client *client) +{ + struct adp5588_kpad *kpad = i2c_get_clientdata(client); + + adp5588_write(client, CFG, 0); + free_irq(client->irq, kpad); + cancel_delayed_work_sync(&kpad->work); + input_unregister_device(kpad->input); + i2c_set_clientdata(client, NULL); + kfree(kpad); + + return 0; +} + +#ifdef CONFIG_PM +static int adp5588_suspend(struct device *dev) +{ + struct adp5588_kpad *kpad = dev_get_drvdata(dev); + struct i2c_client *client = kpad->client; + + disable_irq(client->irq); + cancel_delayed_work_sync(&kpad->work); + + if (device_may_wakeup(&client->dev)) + enable_irq_wake(client->irq); + + return 0; +} + +static int adp5588_resume(struct device *dev) +{ + struct adp5588_kpad *kpad = dev_get_drvdata(dev); + struct i2c_client *client = kpad->client; + + if (device_may_wakeup(&client->dev)) + disable_irq_wake(client->irq); + + enable_irq(client->irq); + + return 0; +} + +static struct dev_pm_ops adp5588_dev_pm_ops = { + .suspend = adp5588_suspend, + .resume = adp5588_resume, +}; +#endif + +static const struct i2c_device_id adp5588_id[] = { + { KBUILD_MODNAME, 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adp5588_id); + +static struct i2c_driver adp5588_driver = { + .driver = { + .name = KBUILD_MODNAME, +#ifdef CONFIG_PM + .pm = &adp5588_dev_pm_ops, +#endif + }, + .probe = adp5588_probe, + .remove = __devexit_p(adp5588_remove), + .id_table = adp5588_id, +}; + +static int __init adp5588_init(void) +{ + return i2c_add_driver(&adp5588_driver); +} +module_init(adp5588_init); + +static void __exit adp5588_exit(void) +{ + i2c_del_driver(&adp5588_driver); +} +module_exit(adp5588_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Michael Hennerich "); +MODULE_DESCRIPTION("ADP5588 Keypad driver"); +MODULE_ALIAS("platform:adp5588-keys"); -- cgit v1.2.3 From 0baf81ba157cb2b89448f0b73fcd9a4f191be8c6 Mon Sep 17 00:00:00 2001 From: Kim Kyuwon Date: Mon, 21 Sep 2009 22:17:04 -0700 Subject: Input: add driver for Maxim MAX7359 key switch controller The Maxim MAX7359 is a I2C interfaced key switch controller which provides microprocessors with management of up to 64 key switches. This patch adds support for the MAX7359 key switch controller. Signed-off-by: Kim Kyuwon Reviewed-by: Trilok Soni Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/Kconfig | 11 + drivers/input/keyboard/Makefile | 1 + drivers/input/keyboard/max7359_keypad.c | 352 ++++++++++++++++++++++++++++++++ 3 files changed, 364 insertions(+) create mode 100644 drivers/input/keyboard/max7359_keypad.c (limited to 'drivers') diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index d615c09a83c..57055bcbd7a 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -261,6 +261,17 @@ config KEYBOARD_MAPLE To compile this driver as a module, choose M here: the module will be called maple_keyb. +config KEYBOARD_MAX7359 + tristate "Maxim MAX7359 Key Switch Controller" + depends on I2C + help + If you say yes here you get support for the Maxim MAX7359 Key + Switch Controller chip. This providers microprocessors with + management of up to 64 key switches + + To compile this driver as a module, choose M here: the + module will be called max7359_keypad. + config KEYBOARD_NEWTON tristate "Newton keyboard" select SERIO diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index a5c08cdf808..85ab894f613 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_KEYBOARD_LM8323) += lm8323.o obj-$(CONFIG_KEYBOARD_LOCOMO) += locomokbd.o obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o +obj-$(CONFIG_KEYBOARD_MAX7359) += max7359_keypad.o obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o obj-$(CONFIG_KEYBOARD_OPENCORES) += opencores-kbd.o diff --git a/drivers/input/keyboard/max7359_keypad.c b/drivers/input/keyboard/max7359_keypad.c new file mode 100644 index 00000000000..8b3ee142a6c --- /dev/null +++ b/drivers/input/keyboard/max7359_keypad.c @@ -0,0 +1,352 @@ +/* + * max7359_keypad.c - MAX7359 Key Switch Controller Driver + * + * Copyright (C) 2009 Samsung Electronics + * Kim Kyuwon + * + * Based on pxa27x_keypad.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Datasheet: http://www.maxim-ic.com/quick_view2.cfm/qv_pk/5456 + */ + +#include +#include +#include +#include +#include + +#define MAX7359_MAX_KEY_ROWS 8 +#define MAX7359_MAX_KEY_COLS 8 +#define MAX7359_MAX_KEY_NUM (MAX7359_MAX_KEY_ROWS * MAX7359_MAX_KEY_COLS) +#define MAX7359_ROW_SHIFT 3 + +/* + * MAX7359 registers + */ +#define MAX7359_REG_KEYFIFO 0x00 +#define MAX7359_REG_CONFIG 0x01 +#define MAX7359_REG_DEBOUNCE 0x02 +#define MAX7359_REG_INTERRUPT 0x03 +#define MAX7359_REG_PORTS 0x04 +#define MAX7359_REG_KEYREP 0x05 +#define MAX7359_REG_SLEEP 0x06 + +/* + * Configuration register bits + */ +#define MAX7359_CFG_SLEEP (1 << 7) +#define MAX7359_CFG_INTERRUPT (1 << 5) +#define MAX7359_CFG_KEY_RELEASE (1 << 3) +#define MAX7359_CFG_WAKEUP (1 << 1) +#define MAX7359_CFG_TIMEOUT (1 << 0) + +/* + * Autosleep register values (ms) + */ +#define MAX7359_AUTOSLEEP_8192 0x01 +#define MAX7359_AUTOSLEEP_4096 0x02 +#define MAX7359_AUTOSLEEP_2048 0x03 +#define MAX7359_AUTOSLEEP_1024 0x04 +#define MAX7359_AUTOSLEEP_512 0x05 +#define MAX7359_AUTOSLEEP_256 0x06 + +struct max7359_keypad { + /* matrix key code map */ + unsigned short keycodes[MAX7359_MAX_KEY_NUM]; + + struct work_struct work; + + struct input_dev *input_dev; + struct i2c_client *client; + + u32 irq; +}; + +static int max7359_write_reg(struct i2c_client *client, u8 reg, u8 val) +{ + int ret = i2c_smbus_write_byte_data(client, reg, val); + + if (ret < 0) + dev_err(&client->dev, "%s: reg 0x%x, val 0x%x, err %d\n", + __func__, reg, val, ret); + return ret; +} + +static int max7359_read_reg(struct i2c_client *client, int reg) +{ + int ret = i2c_smbus_read_byte_data(client, reg); + + if (ret < 0) + dev_err(&client->dev, "%s: reg 0x%x, err %d\n", + __func__, reg, ret); + return ret; +} + +static void max7359_build_keycode(struct max7359_keypad *keypad, + const struct matrix_keymap_data *keymap_data) +{ + struct input_dev *input_dev = keypad->input_dev; + int i; + + for (i = 0; i < keymap_data->keymap_size; i++) { + unsigned int key = keymap_data->keymap[i]; + unsigned int row = KEY_ROW(key); + unsigned int col = KEY_COL(key); + unsigned int scancode = MATRIX_SCAN_CODE(row, col, + MAX7359_ROW_SHIFT); + unsigned short keycode = KEY_VAL(key); + + keypad->keycodes[scancode] = keycode; + __set_bit(keycode, input_dev->keybit); + } + __clear_bit(KEY_RESERVED, input_dev->keybit); +} + +static void max7359_worker(struct work_struct *work) +{ + struct max7359_keypad *keypad = + container_of(work, struct max7359_keypad, work); + struct input_dev *input_dev = keypad->input_dev; + int val, row, col, release, code; + + val = max7359_read_reg(keypad->client, MAX7359_REG_KEYFIFO); + row = val & 0x7; + col = (val >> 3) & 0x7; + release = val & 0x40; + + code = MATRIX_SCAN_CODE(row, col, MAX7359_ROW_SHIFT); + + input_event(input_dev, EV_MSC, MSC_SCAN, code); + input_report_key(input_dev, keypad->keycodes[code], !release); + input_sync(input_dev); + + enable_irq(keypad->irq); + + dev_dbg(&keypad->client->dev, "key[%d:%d] %s\n", row, col, + (release ? "release" : "press")); +} + +static irqreturn_t max7359_interrupt(int irq, void *dev_id) +{ + struct max7359_keypad *keypad = dev_id; + + if (!work_pending(&keypad->work)) { + disable_irq_nosync(keypad->irq); + schedule_work(&keypad->work); + } + + return IRQ_HANDLED; +} + +/* + * Let MAX7359 fall into a deep sleep: + * If no keys are pressed, enter sleep mode for 8192 ms. And if any + * key is pressed, the MAX7359 returns to normal operating mode. + */ +static inline void max7359_fall_deepsleep(struct i2c_client *client) +{ + max7359_write_reg(client, MAX7359_REG_SLEEP, MAX7359_AUTOSLEEP_8192); +} + +/* + * Let MAX7359 take a catnap: + * Autosleep just for 256 ms. + */ +static inline void max7359_take_catnap(struct i2c_client *client) +{ + max7359_write_reg(client, MAX7359_REG_SLEEP, MAX7359_AUTOSLEEP_256); +} + +static int max7359_open(struct input_dev *dev) +{ + struct max7359_keypad *keypad = input_get_drvdata(dev); + + max7359_take_catnap(keypad->client); + + return 0; +} + +static void max7359_close(struct input_dev *dev) +{ + struct max7359_keypad *keypad = input_get_drvdata(dev); + + max7359_fall_deepsleep(keypad->client); +} + +static void max7359_initialize(struct i2c_client *client) +{ + max7359_write_reg(client, MAX7359_REG_CONFIG, + MAX7359_CFG_INTERRUPT | /* Irq clears after host read */ + MAX7359_CFG_KEY_RELEASE | /* Key release enable */ + MAX7359_CFG_WAKEUP); /* Key press wakeup enable */ + + /* Full key-scan functionality */ + max7359_write_reg(client, MAX7359_REG_DEBOUNCE, 0x1F); + + /* nINT asserts every debounce cycles */ + max7359_write_reg(client, MAX7359_REG_INTERRUPT, 0x01); + + max7359_fall_deepsleep(client); +} + +static int __devinit max7359_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + const struct matrix_keymap_data *keymap_data = client->dev.platform_data; + struct max7359_keypad *keypad; + struct input_dev *input_dev; + int ret; + int error; + + if (!client->irq) { + dev_err(&client->dev, "The irq number should not be zero\n"); + return -EINVAL; + } + + /* Detect MAX7359: The initial Keys FIFO value is '0x3F' */ + ret = max7359_read_reg(client, MAX7359_REG_KEYFIFO); + if (ret < 0) { + dev_err(&client->dev, "failed to detect device\n"); + return -ENODEV; + } + + dev_dbg(&client->dev, "keys FIFO is 0x%02x\n", ret); + + keypad = kzalloc(sizeof(struct max7359_keypad), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!keypad || !input_dev) { + dev_err(&client->dev, "failed to allocate memory\n"); + error = -ENOMEM; + goto failed_free_mem; + } + + keypad->client = client; + keypad->input_dev = input_dev; + keypad->irq = client->irq; + INIT_WORK(&keypad->work, max7359_worker); + + input_dev->name = client->name; + input_dev->id.bustype = BUS_I2C; + input_dev->open = max7359_open; + input_dev->close = max7359_close; + input_dev->dev.parent = &client->dev; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); + input_dev->keycodesize = sizeof(keypad->keycodes[0]); + input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes); + input_dev->keycode = keypad->keycodes; + + input_set_capability(input_dev, EV_MSC, MSC_SCAN); + input_set_drvdata(input_dev, keypad); + + max7359_build_keycode(keypad, keymap_data); + + error = request_irq(keypad->irq, max7359_interrupt, + IRQF_TRIGGER_LOW, client->name, keypad); + if (error) { + dev_err(&client->dev, "failed to register interrupt\n"); + goto failed_free_mem; + } + + /* Register the input device */ + error = input_register_device(input_dev); + if (error) { + dev_err(&client->dev, "failed to register input device\n"); + goto failed_free_irq; + } + + /* Initialize MAX7359 */ + max7359_initialize(client); + + i2c_set_clientdata(client, keypad); + device_init_wakeup(&client->dev, 1); + + return 0; + +failed_free_irq: + free_irq(keypad->irq, keypad); +failed_free_mem: + input_free_device(input_dev); + kfree(keypad); + return error; +} + +static int __devexit max7359_remove(struct i2c_client *client) +{ + struct max7359_keypad *keypad = i2c_get_clientdata(client); + + cancel_work_sync(&keypad->work); + input_unregister_device(keypad->input_dev); + free_irq(keypad->irq, keypad); + i2c_set_clientdata(client, NULL); + kfree(keypad); + + return 0; +} + +#ifdef CONFIG_PM +static int max7359_suspend(struct i2c_client *client, pm_message_t mesg) +{ + struct max7359_keypad *keypad = i2c_get_clientdata(client); + + max7359_fall_deepsleep(client); + + if (device_may_wakeup(&client->dev)) + enable_irq_wake(keypad->irq); + + return 0; +} + +static int max7359_resume(struct i2c_client *client) +{ + struct max7359_keypad *keypad = i2c_get_clientdata(client); + + if (device_may_wakeup(&client->dev)) + disable_irq_wake(keypad->irq); + + /* Restore the default setting */ + max7359_take_catnap(client); + + return 0; +} +#else +#define max7359_suspend NULL +#define max7359_resume NULL +#endif + +static const struct i2c_device_id max7359_ids[] = { + { "max7359", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, max7359_ids); + +static struct i2c_driver max7359_i2c_driver = { + .driver = { + .name = "max7359", + }, + .probe = max7359_probe, + .remove = __devexit_p(max7359_remove), + .suspend = max7359_suspend, + .resume = max7359_resume, + .id_table = max7359_ids, +}; + +static int __init max7359_init(void) +{ + return i2c_add_driver(&max7359_i2c_driver); +} +module_init(max7359_init); + +static void __exit max7359_exit(void) +{ + i2c_del_driver(&max7359_i2c_driver); +} +module_exit(max7359_exit); + +MODULE_AUTHOR("Kim Kyuwon "); +MODULE_DESCRIPTION("MAX7359 Key Switch Controller Driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From 44ca397bcfda83a2b1c3e778c547c05678d7ec69 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 21 Sep 2009 22:17:57 -0700 Subject: Input: max7359 - use threaded IRQs Convert max7359 driver to use IRQ threading instead of using workqueue. Tested-by: Joonyoung Shim Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/max7359_keypad.c | 48 +++++++++------------------------ 1 file changed, 13 insertions(+), 35 deletions(-) (limited to 'drivers') diff --git a/drivers/input/keyboard/max7359_keypad.c b/drivers/input/keyboard/max7359_keypad.c index 8b3ee142a6c..3b5b948eba3 100644 --- a/drivers/input/keyboard/max7359_keypad.c +++ b/drivers/input/keyboard/max7359_keypad.c @@ -58,12 +58,8 @@ struct max7359_keypad { /* matrix key code map */ unsigned short keycodes[MAX7359_MAX_KEY_NUM]; - struct work_struct work; - struct input_dev *input_dev; struct i2c_client *client; - - u32 irq; }; static int max7359_write_reg(struct i2c_client *client, u8 reg, u8 val) @@ -106,10 +102,10 @@ static void max7359_build_keycode(struct max7359_keypad *keypad, __clear_bit(KEY_RESERVED, input_dev->keybit); } -static void max7359_worker(struct work_struct *work) +/* runs in an IRQ thread -- can (and will!) sleep */ +static irqreturn_t max7359_interrupt(int irq, void *dev_id) { - struct max7359_keypad *keypad = - container_of(work, struct max7359_keypad, work); + struct max7359_keypad *keypad = dev_id; struct input_dev *input_dev = keypad->input_dev; int val, row, col, release, code; @@ -120,25 +116,13 @@ static void max7359_worker(struct work_struct *work) code = MATRIX_SCAN_CODE(row, col, MAX7359_ROW_SHIFT); + dev_dbg(&keypad->client->dev, + "key[%d:%d] %s\n", row, col, release ? "release" : "press"); + input_event(input_dev, EV_MSC, MSC_SCAN, code); input_report_key(input_dev, keypad->keycodes[code], !release); input_sync(input_dev); - enable_irq(keypad->irq); - - dev_dbg(&keypad->client->dev, "key[%d:%d] %s\n", row, col, - (release ? "release" : "press")); -} - -static irqreturn_t max7359_interrupt(int irq, void *dev_id) -{ - struct max7359_keypad *keypad = dev_id; - - if (!work_pending(&keypad->work)) { - disable_irq_nosync(keypad->irq); - schedule_work(&keypad->work); - } - return IRQ_HANDLED; } @@ -226,8 +210,6 @@ static int __devinit max7359_probe(struct i2c_client *client, keypad->client = client; keypad->input_dev = input_dev; - keypad->irq = client->irq; - INIT_WORK(&keypad->work, max7359_worker); input_dev->name = client->name; input_dev->id.bustype = BUS_I2C; @@ -245,8 +227,9 @@ static int __devinit max7359_probe(struct i2c_client *client, max7359_build_keycode(keypad, keymap_data); - error = request_irq(keypad->irq, max7359_interrupt, - IRQF_TRIGGER_LOW, client->name, keypad); + error = request_threaded_irq(client->irq, NULL, max7359_interrupt, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + client->name, keypad); if (error) { dev_err(&client->dev, "failed to register interrupt\n"); goto failed_free_mem; @@ -268,7 +251,7 @@ static int __devinit max7359_probe(struct i2c_client *client, return 0; failed_free_irq: - free_irq(keypad->irq, keypad); + free_irq(client->irq, keypad); failed_free_mem: input_free_device(input_dev); kfree(keypad); @@ -279,9 +262,8 @@ static int __devexit max7359_remove(struct i2c_client *client) { struct max7359_keypad *keypad = i2c_get_clientdata(client); - cancel_work_sync(&keypad->work); + free_irq(client->irq, keypad); input_unregister_device(keypad->input_dev); - free_irq(keypad->irq, keypad); i2c_set_clientdata(client, NULL); kfree(keypad); @@ -291,22 +273,18 @@ static int __devexit max7359_remove(struct i2c_client *client) #ifdef CONFIG_PM static int max7359_suspend(struct i2c_client *client, pm_message_t mesg) { - struct max7359_keypad *keypad = i2c_get_clientdata(client); - max7359_fall_deepsleep(client); if (device_may_wakeup(&client->dev)) - enable_irq_wake(keypad->irq); + enable_irq_wake(client->irq); return 0; } static int max7359_resume(struct i2c_client *client) { - struct max7359_keypad *keypad = i2c_get_clientdata(client); - if (device_may_wakeup(&client->dev)) - disable_irq_wake(keypad->irq); + disable_irq_wake(client->irq); /* Restore the default setting */ max7359_take_catnap(client); -- cgit v1.2.3 From fde1132374c9ba7da98a73b9a3c150dca6cf8502 Mon Sep 17 00:00:00 2001 From: Raphael Derosso Pereira Date: Mon, 21 Sep 2009 22:24:06 -0700 Subject: Input: add driver for Atmel AT42QT2160 Sensor Chip This version only supports individual cells (no slide support yet). The code has been tested on proprietary development ARM board, but should work fine on other machines. Signed-off-by: Raphael Derosso Pereira Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/Kconfig | 10 + drivers/input/keyboard/Makefile | 1 + drivers/input/keyboard/qt2160.c | 397 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 408 insertions(+) create mode 100644 drivers/input/keyboard/qt2160.c (limited to 'drivers') diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 57055bcbd7a..ee98b1bc5d8 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -114,6 +114,16 @@ config KEYBOARD_ATKBD_RDI_KEYCODES right-hand column will be interpreted as the key shown in the left-hand column. +config QT2160 + tristate "Atmel AT42QT2160 Touch Sensor Chip" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for Atmel AT42QT2160 Touch + Sensor chip as a keyboard input. + + This driver can also be built as a module. If so, the module + will be called qt2160. + config KEYBOARD_BFIN tristate "Blackfin BF54x keypad support" depends on (BF54x && !BF544) diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 85ab894f613..babad5e58b7 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o obj-$(CONFIG_KEYBOARD_OPENCORES) += opencores-kbd.o obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keypad.o obj-$(CONFIG_KEYBOARD_PXA930_ROTARY) += pxa930_rotary.o +obj-$(CONFIG_KEYBOARD_QT2160) += qt2160.o obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o diff --git a/drivers/input/keyboard/qt2160.c b/drivers/input/keyboard/qt2160.c new file mode 100644 index 00000000000..191cc51d6cf --- /dev/null +++ b/drivers/input/keyboard/qt2160.c @@ -0,0 +1,397 @@ +/* + * qt2160.c - Atmel AT42QT2160 Touch Sense Controller + * + * Copyright (C) 2009 Raphael Derosso Pereira + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define QT2160_VALID_CHIPID 0x11 + +#define QT2160_CMD_CHIPID 0 +#define QT2160_CMD_CODEVER 1 +#define QT2160_CMD_GSTAT 2 +#define QT2160_CMD_KEYS3 3 +#define QT2160_CMD_KEYS4 4 +#define QT2160_CMD_SLIDE 5 +#define QT2160_CMD_GPIOS 6 +#define QT2160_CMD_SUBVER 7 +#define QT2160_CMD_CALIBRATE 10 + +#define QT2160_CYCLE_INTERVAL (2*HZ) + +static unsigned char qt2160_key2code[] = { + KEY_0, KEY_1, KEY_2, KEY_3, + KEY_4, KEY_5, KEY_6, KEY_7, + KEY_8, KEY_9, KEY_A, KEY_B, + KEY_C, KEY_D, KEY_E, KEY_F, +}; + +struct qt2160_data { + struct i2c_client *client; + struct input_dev *input; + struct delayed_work dwork; + spinlock_t lock; /* Protects canceling/rescheduling of dwork */ + unsigned short keycodes[ARRAY_SIZE(qt2160_key2code)]; + u16 key_matrix; +}; + +static int qt2160_read_block(struct i2c_client *client, + u8 inireg, u8 *buffer, unsigned int count) +{ + int error, idx = 0; + + /* + * Can't use SMBus block data read. Check for I2C functionality to speed + * things up whenever possible. Otherwise we will be forced to read + * sequentially. + */ + if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + + error = i2c_smbus_write_byte(client, inireg + idx); + if (error) { + dev_err(&client->dev, + "couldn't send request. Returned %d\n", error); + return error; + } + + error = i2c_master_recv(client, buffer, count); + if (error != count) { + dev_err(&client->dev, + "couldn't read registers. Returned %d bytes\n", error); + return error; + } + } else { + + while (count--) { + int data; + + error = i2c_smbus_write_byte(client, inireg + idx); + if (error) { + dev_err(&client->dev, + "couldn't send request. Returned %d\n", error); + return error; + } + + data = i2c_smbus_read_byte(client); + if (data < 0) { + dev_err(&client->dev, + "couldn't read register. Returned %d\n", data); + return data; + } + + buffer[idx++] = data; + } + } + + return 0; +} + +static int qt2160_get_key_matrix(struct qt2160_data *qt2160) +{ + struct i2c_client *client = qt2160->client; + struct input_dev *input = qt2160->input; + u8 regs[6]; + u16 old_matrix, new_matrix; + int ret, i, mask; + + dev_dbg(&client->dev, "requesting keys...\n"); + + /* + * Read all registers from General Status Register + * to GPIOs register + */ + ret = qt2160_read_block(client, QT2160_CMD_GSTAT, regs, 6); + if (ret) { + dev_err(&client->dev, + "could not perform chip read.\n"); + return ret; + } + + old_matrix = qt2160->key_matrix; + qt2160->key_matrix = new_matrix = (regs[2] << 8) | regs[1]; + + mask = 0x01; + for (i = 0; i < 16; ++i, mask <<= 1) { + int keyval = new_matrix & mask; + + if ((old_matrix & mask) != keyval) { + input_report_key(input, qt2160->keycodes[i], keyval); + dev_dbg(&client->dev, "key %d %s\n", + i, keyval ? "pressed" : "released"); + } + } + + input_sync(input); + + return 0; +} + +static irqreturn_t qt2160_irq(int irq, void *_qt2160) +{ + struct qt2160_data *qt2160 = _qt2160; + unsigned long flags; + + spin_lock_irqsave(&qt2160->lock, flags); + + __cancel_delayed_work(&qt2160->dwork); + schedule_delayed_work(&qt2160->dwork, 0); + + spin_unlock_irqrestore(&qt2160->lock, flags); + + return IRQ_HANDLED; +} + +static void qt2160_schedule_read(struct qt2160_data *qt2160) +{ + spin_lock_irq(&qt2160->lock); + schedule_delayed_work(&qt2160->dwork, QT2160_CYCLE_INTERVAL); + spin_unlock_irq(&qt2160->lock); +} + +static void qt2160_worker(struct work_struct *work) +{ + struct qt2160_data *qt2160 = + container_of(work, struct qt2160_data, dwork.work); + + dev_dbg(&qt2160->client->dev, "worker\n"); + + qt2160_get_key_matrix(qt2160); + + /* Avoid device lock up by checking every so often */ + qt2160_schedule_read(qt2160); +} + +static int __devinit qt2160_read(struct i2c_client *client, u8 reg) +{ + int ret; + + ret = i2c_smbus_write_byte(client, reg); + if (ret) { + dev_err(&client->dev, + "couldn't send request. Returned %d\n", ret); + return ret; + } + + ret = i2c_smbus_read_byte(client); + if (ret < 0) { + dev_err(&client->dev, + "couldn't read register. Returned %d\n", ret); + return ret; + } + + return ret; +} + +static int __devinit qt2160_write(struct i2c_client *client, u8 reg, u8 data) +{ + int error; + + error = i2c_smbus_write_byte(client, reg); + if (error) { + dev_err(&client->dev, + "couldn't send request. Returned %d\n", error); + return error; + } + + error = i2c_smbus_write_byte(client, data); + if (error) { + dev_err(&client->dev, + "couldn't write data. Returned %d\n", error); + return error; + } + + return error; +} + + +static bool __devinit qt2160_identify(struct i2c_client *client) +{ + int id, ver, rev; + + /* Read Chid ID to check if chip is valid */ + id = qt2160_read(client, QT2160_CMD_CHIPID); + if (id != QT2160_VALID_CHIPID) { + dev_err(&client->dev, "ID %d not supported\n", id); + return false; + } + + /* Read chip firmware version */ + ver = qt2160_read(client, QT2160_CMD_CODEVER); + if (ver < 0) { + dev_err(&client->dev, "could not get firmware version\n"); + return false; + } + + /* Read chip firmware revision */ + rev = qt2160_read(client, QT2160_CMD_SUBVER); + if (rev < 0) { + dev_err(&client->dev, "could not get firmware revision\n"); + return false; + } + + dev_info(&client->dev, "AT42QT2160 firmware version %d.%d.%d\n", + ver >> 4, ver & 0xf, rev); + + return true; +} + +static int __devinit qt2160_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct qt2160_data *qt2160; + struct input_dev *input; + int i; + int error; + + /* Check functionality */ + error = i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE); + if (!error) { + dev_err(&client->dev, "%s adapter not supported\n", + dev_driver_string(&client->adapter->dev)); + return -ENODEV; + } + + if (!qt2160_identify(client)) + return -ENODEV; + + /* Chip is valid and active. Allocate structure */ + qt2160 = kzalloc(sizeof(struct qt2160_data), GFP_KERNEL); + input = input_allocate_device(); + if (!qt2160 || !input) { + dev_err(&client->dev, "insufficient memory\n"); + error = -ENOMEM; + goto err_free_mem; + } + + qt2160->client = client; + qt2160->input = input; + INIT_DELAYED_WORK(&qt2160->dwork, qt2160_worker); + spin_lock_init(&qt2160->lock); + + input->name = "AT42QT2160 Touch Sense Keyboard"; + input->id.bustype = BUS_I2C; + + input->keycode = qt2160->keycodes; + input->keycodesize = sizeof(qt2160->keycodes[0]); + input->keycodemax = ARRAY_SIZE(qt2160_key2code); + + __set_bit(EV_KEY, input->evbit); + __clear_bit(EV_REP, input->evbit); + for (i = 0; i < ARRAY_SIZE(qt2160_key2code); i++) { + qt2160->keycodes[i] = qt2160_key2code[i]; + __set_bit(qt2160_key2code[i], input->keybit); + } + __clear_bit(KEY_RESERVED, input->keybit); + + /* Calibrate device */ + error = qt2160_write(client, QT2160_CMD_CALIBRATE, 1); + if (error) { + dev_err(&client->dev, "failed to calibrate device\n"); + goto err_free_mem; + } + + if (client->irq) { + error = request_irq(client->irq, qt2160_irq, + IRQF_TRIGGER_FALLING, "qt2160", qt2160); + if (error) { + dev_err(&client->dev, + "failed to allocate irq %d\n", client->irq); + goto err_free_mem; + } + } + + error = input_register_device(qt2160->input); + if (error) { + dev_err(&client->dev, + "Failed to register input device\n"); + goto err_free_irq; + } + + i2c_set_clientdata(client, qt2160); + qt2160_schedule_read(qt2160); + + return 0; + +err_free_irq: + if (client->irq) + free_irq(client->irq, qt2160); +err_free_mem: + input_free_device(input); + kfree(qt2160); + return error; +} + +static int __devexit qt2160_remove(struct i2c_client *client) +{ + struct qt2160_data *qt2160 = i2c_get_clientdata(client); + + /* Release IRQ so no queue will be scheduled */ + if (client->irq) + free_irq(client->irq, qt2160); + + cancel_delayed_work_sync(&qt2160->dwork); + + input_unregister_device(qt2160->input); + kfree(qt2160); + + i2c_set_clientdata(client, NULL); + return 0; +} + +static struct i2c_device_id qt2160_idtable[] = { + { "qt2160", 0, }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, qt2160_idtable); + +static struct i2c_driver qt2160_driver = { + .driver = { + .name = "qt2160", + .owner = THIS_MODULE, + }, + + .id_table = qt2160_idtable, + .probe = qt2160_probe, + .remove = __devexit_p(qt2160_remove), +}; + +static int __init qt2160_init(void) +{ + return i2c_add_driver(&qt2160_driver); +} +module_init(qt2160_init); + +static void __exit qt2160_cleanup(void) +{ + i2c_del_driver(&qt2160_driver); +} +module_exit(qt2160_cleanup); + +MODULE_AUTHOR("Raphael Derosso Pereira "); +MODULE_DESCRIPTION("Driver for AT42QT2160 Touch Sensor"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3