From 1bc4ccfff8675adc3d96f91245eb7e2dc0043ca9 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 9 Jan 2006 17:18:14 +0000 Subject: [PATCH] libata: add a function to decide if we need iordy This ought to be simple but for PIO2 we have to poke around the drive data to get it 100% correct. Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index bc48d88fef5..b42acbe0e9a 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1168,6 +1168,39 @@ ata_exec_internal(struct ata_port *ap, struct ata_device *dev, return AC_ERR_OTHER; } +/** + * ata_pio_need_iordy - check if iordy needed + * @adev: ATA device + * + * Check if the current speed of the device requires IORDY. Used + * by various controllers for chip configuration. + */ + +unsigned int ata_pio_need_iordy(const struct ata_device *adev) +{ + int pio; + int speed = adev->pio_mode - XFER_PIO_0; + + if (speed < 2) + return 0; + if (speed > 2) + return 1; + + /* If we have no drive specific rule, then PIO 2 is non IORDY */ + + if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE */ + pio = adev->id[ATA_ID_EIDE_PIO]; + /* Is the speed faster than the drive allows non IORDY ? */ + if (pio) { + /* This is cycle times not frequency - watch the logic! */ + if (pio > 240) /* PIO2 is 240nS per cycle */ + return 1; + return 0; + } + } + return 0; +} + /** * ata_dev_identify - obtain IDENTIFY x DEVICE page * @ap: port on which device we wish to probe resides @@ -5126,6 +5159,7 @@ EXPORT_SYMBOL_GPL(ata_dev_id_string); EXPORT_SYMBOL_GPL(ata_dev_config); EXPORT_SYMBOL_GPL(ata_scsi_simulate); +EXPORT_SYMBOL_GPL(ata_pio_need_iordy); EXPORT_SYMBOL_GPL(ata_timing_compute); EXPORT_SYMBOL_GPL(ata_timing_merge); -- cgit v1.2.3