From 237c8d2f54ff12bd4fea1a9d18a94ae5810271d3 Mon Sep 17 00:00:00 2001 From: Gong Jun Date: Mon, 30 Mar 2009 21:46:42 +0200 Subject: hwmon: (w83627ehf) Add support for W83667HG Add initial support for the Nuvoton W83667HG chip to the w83627ehf driver. It has been tested on ASUS P5QL PRO by Gong Jun. At the moment there is still a usability issue which is that only in6 or temp3 can be present on the W83667HG, so the driver shouldn't expose both. This will be addressed later. Signed-off-by: Gong Jun Acked-by: David Hubbard Signed-off-by: Jean Delvare --- drivers/hwmon/Kconfig | 4 +- drivers/hwmon/w83627ehf.c | 106 ++++++++++++++++++++++++++++++---------------- 2 files changed, 72 insertions(+), 38 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index b4eea0292c1..0eb4170cc4a 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -827,7 +827,7 @@ config SENSORS_W83627HF will be called w83627hf. config SENSORS_W83627EHF - tristate "Winbond W83627EHF/DHG" + tristate "Winbond W83627EHF/EHG/DHG, W83667HG" select HWMON_VID help If you say yes here you get support for the hardware @@ -838,6 +838,8 @@ config SENSORS_W83627EHF chip suited for specific Intel processors that use PECI such as the Core 2 Duo. + This driver also supports the W83667HG chip. + This driver can also be built as a module. If so, the module will be called w83627ehf. diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index 18432e34dc7..20a9332959b 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -36,6 +36,7 @@ w83627ehf 10 5 4 3 0x8850 0x88 0x5ca3 0x8860 0xa1 w83627dhg 9 5 4 3 0xa020 0xc1 0x5ca3 + w83667hg 9 5 3 3 0xa510 0xc1 0x5ca3 */ #include @@ -52,12 +53,13 @@ #include #include "lm75.h" -enum kinds { w83627ehf, w83627dhg }; +enum kinds { w83627ehf, w83627dhg, w83667hg }; /* used to set data->name = w83627ehf_device_names[data->sio_kind] */ static const char * w83627ehf_device_names[] = { "w83627ehf", "w83627dhg", + "w83667hg", }; static unsigned short force_id; @@ -71,6 +73,7 @@ MODULE_PARM_DESC(force_id, "Override the detected device ID"); */ #define W83627EHF_LD_HWM 0x0b +#define W83667HG_LD_VID 0x0d #define SIO_REG_LDSEL 0x07 /* Logical device select */ #define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */ @@ -83,6 +86,7 @@ MODULE_PARM_DESC(force_id, "Override the detected device ID"); #define SIO_W83627EHF_ID 0x8850 #define SIO_W83627EHG_ID 0x8860 #define SIO_W83627DHG_ID 0xa020 +#define SIO_W83667HG_ID 0xa510 #define SIO_ID_MASK 0xFFF0 static inline void @@ -289,6 +293,7 @@ struct w83627ehf_data { u8 pwm_mode[4]; /* 0->DC variable voltage, 1->PWM variable duty cycle */ u8 pwm_enable[4]; /* 1->manual 2->thermal cruise (also called SmartFan I) */ + u8 pwm_num; /* number of pwm */ u8 pwm[4]; u8 target_temp[4]; u8 tolerance[4]; @@ -1192,7 +1197,7 @@ static void w83627ehf_device_remove_files(struct device *dev) device_remove_file(dev, &sda_fan_div[i].dev_attr); device_remove_file(dev, &sda_fan_min[i].dev_attr); } - for (i = 0; i < 4; i++) { + for (i = 0; i < data->pwm_num; i++) { device_remove_file(dev, &sda_pwm[i].dev_attr); device_remove_file(dev, &sda_pwm_mode[i].dev_attr); device_remove_file(dev, &sda_pwm_enable[i].dev_attr); @@ -1272,8 +1277,10 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev) data->name = w83627ehf_device_names[sio_data->kind]; platform_set_drvdata(pdev, data); - /* 627EHG and 627EHF have 10 voltage inputs; DHG has 9 */ - data->in_num = (sio_data->kind == w83627dhg) ? 9 : 10; + /* 627EHG and 627EHF have 10 voltage inputs; 627DHG and 667HG have 9 */ + data->in_num = (sio_data->kind == w83627ehf) ? 10 : 9; + /* 667HG has 3 pwms */ + data->pwm_num = (sio_data->kind == w83667hg) ? 3 : 4; /* Initialize the chip */ w83627ehf_init_device(data); @@ -1281,44 +1288,64 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev) data->vrm = vid_which_vrm(); superio_enter(sio_data->sioreg); /* Read VID value */ - superio_select(sio_data->sioreg, W83627EHF_LD_HWM); - if (superio_inb(sio_data->sioreg, SIO_REG_VID_CTRL) & 0x80) { - /* Set VID input sensibility if needed. In theory the BIOS - should have set it, but in practice it's not always the - case. We only do it for the W83627EHF/EHG because the - W83627DHG is more complex in this respect. */ - if (sio_data->kind == w83627ehf) { - en_vrm10 = superio_inb(sio_data->sioreg, - SIO_REG_EN_VRM10); - if ((en_vrm10 & 0x08) && data->vrm == 90) { - dev_warn(dev, "Setting VID input voltage to " - "TTL\n"); - superio_outb(sio_data->sioreg, SIO_REG_EN_VRM10, - en_vrm10 & ~0x08); - } else if (!(en_vrm10 & 0x08) && data->vrm == 100) { - dev_warn(dev, "Setting VID input voltage to " - "VRM10\n"); - superio_outb(sio_data->sioreg, SIO_REG_EN_VRM10, - en_vrm10 | 0x08); - } - } - - data->vid = superio_inb(sio_data->sioreg, SIO_REG_VID_DATA); - if (sio_data->kind == w83627ehf) /* 6 VID pins only */ - data->vid &= 0x3f; - + if (sio_data->kind == w83667hg) { + /* W83667HG has different pins for VID input and output, so + we can get the VID input values directly at logical device D + 0xe3. */ + superio_select(sio_data->sioreg, W83667HG_LD_VID); + data->vid = superio_inb(sio_data->sioreg, 0xe3); err = device_create_file(dev, &dev_attr_cpu0_vid); if (err) goto exit_release; } else { - dev_info(dev, "VID pins in output mode, CPU VID not " - "available\n"); + superio_select(sio_data->sioreg, W83627EHF_LD_HWM); + if (superio_inb(sio_data->sioreg, SIO_REG_VID_CTRL) & 0x80) { + /* Set VID input sensibility if needed. In theory the + BIOS should have set it, but in practice it's not + always the case. We only do it for the W83627EHF/EHG + because the W83627DHG is more complex in this + respect. */ + if (sio_data->kind == w83627ehf) { + en_vrm10 = superio_inb(sio_data->sioreg, + SIO_REG_EN_VRM10); + if ((en_vrm10 & 0x08) && data->vrm == 90) { + dev_warn(dev, "Setting VID input " + "voltage to TTL\n"); + superio_outb(sio_data->sioreg, + SIO_REG_EN_VRM10, + en_vrm10 & ~0x08); + } else if (!(en_vrm10 & 0x08) + && data->vrm == 100) { + dev_warn(dev, "Setting VID input " + "voltage to VRM10\n"); + superio_outb(sio_data->sioreg, + SIO_REG_EN_VRM10, + en_vrm10 | 0x08); + } + } + + data->vid = superio_inb(sio_data->sioreg, + SIO_REG_VID_DATA); + if (sio_data->kind == w83627ehf) /* 6 VID pins only */ + data->vid &= 0x3f; + + err = device_create_file(dev, &dev_attr_cpu0_vid); + if (err) + goto exit_release; + } else { + dev_info(dev, "VID pins in output mode, CPU VID not " + "available\n"); + } } /* fan4 and fan5 share some pins with the GPIO and serial flash */ - - fan5pin = !(superio_inb(sio_data->sioreg, 0x24) & 0x2); - fan4pin = !(superio_inb(sio_data->sioreg, 0x29) & 0x6); + if (sio_data->kind == w83667hg) { + fan5pin = superio_inb(sio_data->sioreg, 0x27) & 0x20; + fan4pin = superio_inb(sio_data->sioreg, 0x27) & 0x40; + } else { + fan5pin = !(superio_inb(sio_data->sioreg, 0x24) & 0x02); + fan4pin = !(superio_inb(sio_data->sioreg, 0x29) & 0x06); + } superio_exit(sio_data->sioreg); /* It looks like fan4 and fan5 pins can be alternatively used @@ -1344,7 +1371,7 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev) goto exit_remove; /* if fan4 is enabled create the sf3 files for it */ - if (data->has_fan & (1 << 3)) + if ((data->has_fan & (1 << 3)) && data->pwm_num >= 4) for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan4); i++) { if ((err = device_create_file(dev, &sda_sf3_arrays_fan4[i].dev_attr))) @@ -1372,7 +1399,7 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev) || (err = device_create_file(dev, &sda_fan_min[i].dev_attr))) goto exit_remove; - if (i < 4 && /* w83627ehf only has 4 pwm */ + if (i < data->pwm_num && ((err = device_create_file(dev, &sda_pwm[i].dev_attr)) || (err = device_create_file(dev, @@ -1442,6 +1469,7 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr, static const char __initdata sio_name_W83627EHF[] = "W83627EHF"; static const char __initdata sio_name_W83627EHG[] = "W83627EHG"; static const char __initdata sio_name_W83627DHG[] = "W83627DHG"; + static const char __initdata sio_name_W83667HG[] = "W83667HG"; u16 val; const char *sio_name; @@ -1466,6 +1494,10 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr, sio_data->kind = w83627dhg; sio_name = sio_name_W83627DHG; break; + case SIO_W83667HG_ID: + sio_data->kind = w83667hg; + sio_name = sio_name_W83667HG; + break; default: if (val != 0xffff) pr_debug(DRVNAME ": unsupported chip ID: 0x%04x\n", -- cgit v1.2.3