From 2844f7975837d47fe7f20aa96c1df3bcecf91935 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Mon, 27 Apr 2009 22:35:14 +0000 Subject: igb: make rxcsum configuration seperate from multiqueue The igb driver was being incorrectly setup to only allow disabling receive checksum if multiqueue was disabled. This change corrects that so that RXCSUM is configured regardless of queue configuration. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/igb/e1000_defines.h | 2 +- drivers/net/igb/igb_main.c | 30 +++++++++++------------------- 2 files changed, 12 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/net/igb/e1000_defines.h b/drivers/net/igb/e1000_defines.h index ad2d319d0f8..65acbbaca2d 100644 --- a/drivers/net/igb/e1000_defines.h +++ b/drivers/net/igb/e1000_defines.h @@ -289,8 +289,8 @@ #define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400 /* Receive Checksum Control */ +#define E1000_RXCSUM_IPOFL 0x00000100 /* IPv4 checksum offload */ #define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */ -#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */ #define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */ /* Header split receive */ diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index ab846ec6520..4ecf4dfce9b 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -2236,29 +2236,21 @@ static void igb_configure_rx(struct igb_adapter *adapter) mrqc |= (E1000_MRQC_RSS_FIELD_IPV6_UDP_EX | E1000_MRQC_RSS_FIELD_IPV6_TCP_EX); - wr32(E1000_MRQC, mrqc); - - /* Multiqueue and raw packet checksumming are mutually - * exclusive. Note that this not the same as TCP/IP - * checksumming, which works fine. */ - rxcsum = rd32(E1000_RXCSUM); - rxcsum |= E1000_RXCSUM_PCSD; - wr32(E1000_RXCSUM, rxcsum); - } else { + } else if (adapter->vfs_allocated_count) { /* Enable multi-queue for sr-iov */ - if (adapter->vfs_allocated_count) - wr32(E1000_MRQC, E1000_MRQC_ENABLE_VMDQ); - /* Enable Receive Checksum Offload for TCP and UDP */ - rxcsum = rd32(E1000_RXCSUM); - if (adapter->rx_csum) - rxcsum |= E1000_RXCSUM_TUOFL | E1000_RXCSUM_IPPCSE; - else - rxcsum &= ~(E1000_RXCSUM_TUOFL | E1000_RXCSUM_IPPCSE); - - wr32(E1000_RXCSUM, rxcsum); + wr32(E1000_MRQC, E1000_MRQC_ENABLE_VMDQ); } + /* Enable Receive Checksum Offload for TCP and UDP */ + rxcsum = rd32(E1000_RXCSUM); + /* Disable raw packet checksumming */ + rxcsum |= E1000_RXCSUM_PCSD; + /* Don't need to set TUOFL or IPOFL, they default to 1 */ + if (!adapter->rx_csum) + rxcsum &= ~(E1000_RXCSUM_TUOFL | E1000_RXCSUM_IPOFL); + wr32(E1000_RXCSUM, rxcsum); + /* Set the default pool for the PF's first queue */ igb_configure_vt_default_pool(adapter); -- cgit v1.2.3