From 3ba71d2194500d1a9fef1b8491b9e0c168e7d46e Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@linuxtv.org>
Date: Fri, 7 Dec 2007 01:40:36 -0300
Subject: V4L/DVB (6900): cx23885: enable EZ-QAM mode for Hauppauge WinTV
 HVR-1800

Add module option 'alt_tuner' disabled by default.

When set to one, the dvb_frontend of HVR1800 will consist of:
s5h1409 demod + tda18271 tuner

When set zero (default), the dvb_frontend of HVR1800 will consist of:
s5h1409 demod + mt2131 tuner

If the tda18271 is used in digital mode, you will not be able to
tune an analog channel at the same time.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/video/cx23885/cx23885-cards.c |  3 +-
 drivers/media/video/cx23885/cx23885-dvb.c   | 47 ++++++++++++++++++++++++++++-
 2 files changed, 48 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index e11fa10a13a..fbf93c63dca 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -246,7 +246,8 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
 		/* GPIO-11-14 cx23417 addr0-3 */
 		/* GPIO-15-18 cx23417 READY, CS, RD, WR */
 		/* GPIO-19 IR_RX */
-		// FIXME: Analog requires the tuner is brought out of reset
+
+		cx_set(GP0_IO, 0x00040004); /* Bring the tuner out of reset */
 		break;
 	}
 }
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index c1309118ea8..0f7e9dfcd73 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -32,6 +32,7 @@
 
 #include "s5h1409.h"
 #include "mt2131.h"
+#include "tda8290.h"
 #include "lgdt330x.h"
 #include "xc5000.h"
 #include "dvb-pll.h"
@@ -45,6 +46,12 @@ static unsigned int debug = 0;
 
 /* ------------------------------------------------------------------ */
 
+static unsigned int alt_tuner;
+module_param(alt_tuner, int, 0644);
+MODULE_PARM_DESC(alt_tuner, "Enable alternate tuner configuration");
+
+/* ------------------------------------------------------------------ */
+
 static int dvb_buf_setup(struct videobuf_queue *q,
 			 unsigned int *count, unsigned int *size)
 {
@@ -119,6 +126,15 @@ static struct s5h1409_config hauppauge_generic_config = {
 	.status_mode   = S5H1409_DEMODLOCKING
 };
 
+static struct s5h1409_config hauppauge_ezqam_config = {
+	.demod_address = 0x32 >> 1,
+	.output_mode   = S5H1409_SERIAL_OUTPUT,
+	.gpio          = S5H1409_GPIO_OFF,
+	.qam_if        = 4000,
+	.inversion     = S5H1409_INVERSION_ON,
+	.status_mode   = S5H1409_DEMODLOCKING
+};
+
 static struct s5h1409_config hauppauge_hvr1800lp_config = {
 	.demod_address = 0x32 >> 1,
 	.output_mode   = S5H1409_SERIAL_OUTPUT,
@@ -203,7 +219,6 @@ static int dvb_register(struct cx23885_tsport *port)
 	/* init frontend */
 	switch (dev->board) {
 	case CX23885_BOARD_HAUPPAUGE_HVR1250:
-	case CX23885_BOARD_HAUPPAUGE_HVR1800:
 		i2c_bus = &dev->i2c_bus[0];
 		port->dvb.frontend = dvb_attach(s5h1409_attach,
 						&hauppauge_generic_config,
@@ -214,6 +229,33 @@ static int dvb_register(struct cx23885_tsport *port)
 				   &hauppauge_generic_tunerconfig, 0);
 		}
 		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1800:
+		i2c_bus = &dev->i2c_bus[0];
+		switch (alt_tuner) {
+		case 1:
+			port->dvb.frontend =
+				dvb_attach(s5h1409_attach,
+					   &hauppauge_ezqam_config,
+					   &i2c_bus->i2c_adap);
+			if (port->dvb.frontend != NULL) {
+				dvb_attach(tda829x_attach, port->dvb.frontend,
+					   &dev->i2c_bus[1].i2c_adap, 0x42,
+					   NULL);
+			}
+			break;
+		case 0:
+		default:
+			port->dvb.frontend =
+				dvb_attach(s5h1409_attach,
+					   &hauppauge_generic_config,
+					   &i2c_bus->i2c_adap);
+			if (port->dvb.frontend != NULL)
+				dvb_attach(mt2131_attach, port->dvb.frontend,
+					   &i2c_bus->i2c_adap,
+					   &hauppauge_generic_tunerconfig, 0);
+			break;
+		}
+		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
 		i2c_bus = &dev->i2c_bus[0];
 		port->dvb.frontend = dvb_attach(s5h1409_attach,
@@ -284,6 +326,9 @@ static int dvb_register(struct cx23885_tsport *port)
 	/* Put the analog decoder in standby to keep it quiet */
 	cx23885_call_i2c_clients(i2c_bus, TUNER_SET_STANDBY, NULL);
 
+	if (port->dvb.frontend->ops.analog_ops.standby)
+		port->dvb.frontend->ops.analog_ops.standby(port->dvb.frontend);
+
 	/* register everything */
 	return videobuf_dvb_register(&port->dvb, THIS_MODULE, port,
 				     &dev->pci->dev);
-- 
cgit v1.2.3