From ec51b7f538c440bfa5a4d538133c659071c02155 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 19 Jan 2010 00:27:58 -0800 Subject: Input: ad7879 - support auxiliary GPIOs via gpiolib Drop the simple fancy sysfs hooks for the aux GPIOs and expose these via the gpiolib interface so that other drivers can use them. Signed-off-by: Michael Hennerich Signed-off-by: Mike Frysinger Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/ad7879.c | 197 ++++++++++++++++++++++++++----------- 1 file changed, 141 insertions(+), 56 deletions(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c index c21e6d3a884..794d070c690 100644 --- a/drivers/input/touchscreen/ad7879.c +++ b/drivers/input/touchscreen/ad7879.c @@ -47,6 +47,7 @@ #include #include #include +#include #include @@ -132,7 +133,9 @@ struct ad7879 { struct input_dev *input; struct work_struct work; struct timer_list timer; - +#ifdef CONFIG_GPIOLIB + struct gpio_chip gc; +#endif struct mutex mutex; unsigned disabled:1; /* P: mutex */ @@ -150,11 +153,9 @@ struct ad7879 { u8 median; u16 x_plate_ohms; u16 pressure_max; - u16 gpio_init; u16 cmd_crtl1; u16 cmd_crtl2; u16 cmd_crtl3; - unsigned gpio:1; }; static int ad7879_read(bus_device *, u8); @@ -237,24 +238,6 @@ static irqreturn_t ad7879_irq(int irq, void *handle) static void ad7879_setup(struct ad7879 *ts) { - ts->cmd_crtl3 = AD7879_YPLUS_BIT | - AD7879_XPLUS_BIT | - AD7879_Z2_BIT | - AD7879_Z1_BIT | - AD7879_TEMPMASK_BIT | - AD7879_AUXVBATMASK_BIT | - AD7879_GPIOALERTMASK_BIT; - - ts->cmd_crtl2 = AD7879_PM(AD7879_PM_DYN) | AD7879_DFR | - AD7879_AVG(ts->averaging) | - AD7879_MFS(ts->median) | - AD7879_FCD(ts->first_conversion_delay) | - ts->gpio_init; - - ts->cmd_crtl1 = AD7879_MODE_INT | AD7879_MODE_SEQ1 | - AD7879_ACQ(ts->acquisition_time) | - AD7879_TMR(ts->pen_down_acc_interval); - ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2); ad7879_write(ts->bus, AD7879_REG_CTRL3, ts->cmd_crtl3); ad7879_write(ts->bus, AD7879_REG_CTRL1, ts->cmd_crtl1); @@ -324,48 +307,132 @@ static ssize_t ad7879_disable_store(struct device *dev, static DEVICE_ATTR(disable, 0664, ad7879_disable_show, ad7879_disable_store); -static ssize_t ad7879_gpio_show(struct device *dev, - struct device_attribute *attr, char *buf) +static struct attribute *ad7879_attributes[] = { + &dev_attr_disable.attr, + NULL +}; + +static const struct attribute_group ad7879_attr_group = { + .attrs = ad7879_attributes, +}; + +#ifdef CONFIG_GPIOLIB +static int ad7879_gpio_direction_input(struct gpio_chip *chip, + unsigned gpio) { - struct ad7879 *ts = dev_get_drvdata(dev); + struct ad7879 *ts = container_of(chip, struct ad7879, gc); + int err; - return sprintf(buf, "%u\n", ts->gpio); + mutex_lock(&ts->mutex); + ts->cmd_crtl2 |= AD7879_GPIO_EN | AD7879_GPIODIR | AD7879_GPIOPOL; + err = ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2); + mutex_unlock(&ts->mutex); + + return err; } -static ssize_t ad7879_gpio_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) +static int ad7879_gpio_direction_output(struct gpio_chip *chip, + unsigned gpio, int level) { - struct ad7879 *ts = dev_get_drvdata(dev); - unsigned long val; - int error; + struct ad7879 *ts = container_of(chip, struct ad7879, gc); + int err; - error = strict_strtoul(buf, 10, &val); - if (error) - return error; + mutex_lock(&ts->mutex); + ts->cmd_crtl2 &= ~AD7879_GPIODIR; + ts->cmd_crtl2 |= AD7879_GPIO_EN | AD7879_GPIOPOL; + if (level) + ts->cmd_crtl2 |= AD7879_GPIO_DATA; + else + ts->cmd_crtl2 &= ~AD7879_GPIO_DATA; + + err = ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2); + mutex_unlock(&ts->mutex); + + return err; +} + +static int ad7879_gpio_get_value(struct gpio_chip *chip, unsigned gpio) +{ + struct ad7879 *ts = container_of(chip, struct ad7879, gc); + u16 val; mutex_lock(&ts->mutex); - ts->gpio = !!val; - error = ad7879_write(ts->bus, AD7879_REG_CTRL2, - ts->gpio ? - ts->cmd_crtl2 & ~AD7879_GPIO_DATA : - ts->cmd_crtl2 | AD7879_GPIO_DATA); + val = ad7879_read(ts->bus, AD7879_REG_CTRL2); mutex_unlock(&ts->mutex); - return error ? : count; + return !!(val & AD7879_GPIO_DATA); } -static DEVICE_ATTR(gpio, 0664, ad7879_gpio_show, ad7879_gpio_store); +static void ad7879_gpio_set_value(struct gpio_chip *chip, + unsigned gpio, int value) +{ + struct ad7879 *ts = container_of(chip, struct ad7879, gc); -static struct attribute *ad7879_attributes[] = { - &dev_attr_disable.attr, - &dev_attr_gpio.attr, - NULL -}; + mutex_lock(&ts->mutex); + if (value) + ts->cmd_crtl2 |= AD7879_GPIO_DATA; + else + ts->cmd_crtl2 &= ~AD7879_GPIO_DATA; -static const struct attribute_group ad7879_attr_group = { - .attrs = ad7879_attributes, -}; + ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2); + mutex_unlock(&ts->mutex); +} + +static int __devinit ad7879_gpio_add(struct device *dev) +{ + struct ad7879 *ts = dev_get_drvdata(dev); + struct ad7879_platform_data *pdata = dev->platform_data; + int ret = 0; + + if (pdata->gpio_export) { + ts->gc.direction_input = ad7879_gpio_direction_input; + ts->gc.direction_output = ad7879_gpio_direction_output; + ts->gc.get = ad7879_gpio_get_value; + ts->gc.set = ad7879_gpio_set_value; + ts->gc.can_sleep = 1; + ts->gc.base = pdata->gpio_base; + ts->gc.ngpio = 1; + ts->gc.label = "AD7879-GPIO"; + ts->gc.owner = THIS_MODULE; + ts->gc.dev = dev; + + ret = gpiochip_add(&ts->gc); + if (ret) + dev_err(dev, "failed to register gpio %d\n", + ts->gc.base); + } + + return ret; +} + +/* + * We mark ad7879_gpio_remove inline so there is a chance the code + * gets discarded when not needed. We can't do __devinit/__devexit + * markup since it is used in both probe and remove methods. + */ +static inline void ad7879_gpio_remove(struct device *dev) +{ + struct ad7879 *ts = dev_get_drvdata(dev); + struct ad7879_platform_data *pdata = dev->platform_data; + int ret; + + if (pdata->gpio_export) { + ret = gpiochip_remove(&ts->gc); + if (ret) + dev_err(dev, "failed to remove gpio %d\n", + ts->gc.base); + } +} +#else +static inline int ad7879_gpio_add(struct device *dev) +{ + return 0; +} + +static inline void ad7879_gpio_remove(struct device *dev) +{ +} +#endif static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts) { @@ -403,12 +470,6 @@ static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts) ts->pen_down_acc_interval = pdata->pen_down_acc_interval; ts->median = pdata->median; - if (pdata->gpio_output) - ts->gpio_init = AD7879_GPIO_EN | - (pdata->gpio_default ? 0 : AD7879_GPIO_DATA); - else - ts->gpio_init = AD7879_GPIO_EN | AD7879_GPIODIR; - snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&bus->dev)); input_dev->name = "AD7879 Touchscreen"; @@ -446,6 +507,23 @@ static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts) goto err_free_mem; } + ts->cmd_crtl3 = AD7879_YPLUS_BIT | + AD7879_XPLUS_BIT | + AD7879_Z2_BIT | + AD7879_Z1_BIT | + AD7879_TEMPMASK_BIT | + AD7879_AUXVBATMASK_BIT | + AD7879_GPIOALERTMASK_BIT; + + ts->cmd_crtl2 = AD7879_PM(AD7879_PM_DYN) | AD7879_DFR | + AD7879_AVG(ts->averaging) | + AD7879_MFS(ts->median) | + AD7879_FCD(ts->first_conversion_delay); + + ts->cmd_crtl1 = AD7879_MODE_INT | AD7879_MODE_SEQ1 | + AD7879_ACQ(ts->acquisition_time) | + AD7879_TMR(ts->pen_down_acc_interval); + ad7879_setup(ts); err = request_irq(bus->irq, ad7879_irq, @@ -460,15 +538,21 @@ static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts) if (err) goto err_free_irq; - err = input_register_device(input_dev); + err = ad7879_gpio_add(&bus->dev); if (err) goto err_remove_attr; + err = input_register_device(input_dev); + if (err) + goto err_remove_gpio; + dev_info(&bus->dev, "Rev.%d touchscreen, irq %d\n", revid >> 8, bus->irq); return 0; +err_remove_gpio: + ad7879_gpio_remove(&bus->dev); err_remove_attr: sysfs_remove_group(&bus->dev.kobj, &ad7879_attr_group); err_free_irq: @@ -481,6 +565,7 @@ err_free_mem: static int __devexit ad7879_destroy(bus_device *bus, struct ad7879 *ts) { + ad7879_gpio_remove(&bus->dev); ad7879_disable(ts); sysfs_remove_group(&ts->bus->dev.kobj, &ad7879_attr_group); free_irq(ts->bus->irq, ts); -- cgit v1.2.3 From 57b5e2ae5b5f6b687ef2c644b1cb06bd217cdbe7 Mon Sep 17 00:00:00 2001 From: Jon Dodgson Date: Thu, 28 Jan 2010 00:07:45 -0800 Subject: Input: lifebook - add another Lifebook DMI signature There are many many ways one can capitalize "Lifebook B Series"... Signed-off-by: Jon Dodgson Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/lifebook.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c index 6d7aa10d10f..7c1d7d420ae 100644 --- a/drivers/input/mouse/lifebook.c +++ b/drivers/input/mouse/lifebook.c @@ -50,6 +50,12 @@ static const struct dmi_system_id __initconst lifebook_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "FLORA-ie 55mi"), }, }, + { + /* LifeBook B */ + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "Lifebook B Series"), + }, + }, { /* LifeBook B */ .matches = { -- cgit v1.2.3 From 93fb84b50fe03aabca8d9dea5d3ba521a07e8571 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?David=20H=C3=A4rdeman?= Date: Thu, 28 Jan 2010 22:28:27 -0800 Subject: Input: winbond-cir - remove dmesg spam MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit I missed converting one dev_info call to deb_dbg before submitting the driver. Without this change, a message will be printed to dmesg for each button press if a RC6 remote is used. Signed-off-by: David Härdeman Cc: stable Signed-off-by: Dmitry Torokhov --- drivers/input/misc/winbond-cir.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/misc/winbond-cir.c b/drivers/input/misc/winbond-cir.c index 33309fe44e2..c8f5a9a3fa1 100644 --- a/drivers/input/misc/winbond-cir.c +++ b/drivers/input/misc/winbond-cir.c @@ -768,7 +768,7 @@ wbcir_parse_rc6(struct device *dev, struct wbcir_data *data) return; } - dev_info(dev, "IR-RC6 ad 0x%02X cm 0x%02X cu 0x%04X " + dev_dbg(dev, "IR-RC6 ad 0x%02X cm 0x%02X cu 0x%04X " "toggle %u mode %u scan 0x%08X\n", address, command, -- cgit v1.2.3 From cb6ecf6f7afece066265e243657b0ac28150a7b2 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Thu, 28 Jan 2010 22:28:27 -0800 Subject: Input: add the ABS_MT_PRESSURE event For pressure-based multi-touch devices, a direct way to send sensor intensity data per finger is needed. This patch adds the ABS_MT_PRESSURE event to the MT protocol. Requested-by: Yoonyoung Shim Requested-by: Mika Kuoppala Requested-by: Peter Hutterer Signed-off-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov --- drivers/input/input.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/input/input.c b/drivers/input/input.c index 30b503b8d67..86cb2d2196f 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -46,6 +46,7 @@ static unsigned int input_abs_bypass_init_data[] __initdata = { ABS_MT_TOOL_TYPE, ABS_MT_BLOB_ID, ABS_MT_TRACKING_ID, + ABS_MT_PRESSURE, 0 }; static unsigned long input_abs_bypass[BITS_TO_LONGS(ABS_CNT)]; -- cgit v1.2.3