From 46767aeba58ca9357a2309765201bad38d8f5e9b Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 29 Sep 2006 18:26:47 +0100 Subject: [PATCH] libata: Don't believe bogus claims in the older PIO mode register Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index dce65651d85..ad8e2c64c86 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -870,7 +870,11 @@ static unsigned int ata_id_xfermask(const u16 *id) * the PIO timing number for the maximum. Turn it into * a mask. */ - pio_mask = (2 << (id[ATA_ID_OLD_PIO_MODES] & 0xFF)) - 1 ; + u8 mode = id[ATA_ID_OLD_PIO_MODES] & 0xFF; + if (mode < 5) /* Valid PIO range */ + pio_mask = (2 << mode) - 1; + else + pio_mask = 1; /* But wait.. there's more. Design your standards by * committee and you too can get a free iordy field to -- cgit v1.2.3 From bbe1fe7ea3438f8c4447dbcd46a126581ed2ed41 Mon Sep 17 00:00:00 2001 From: Eran Tromer Date: Tue, 10 Oct 2006 14:29:25 -0700 Subject: [PATCH] libata: return sense data in HDIO_DRIVE_CMD ioctl Make the HDIO_DRIVE_CMD ioctl in libata (ATA command pass through) return a few ATA registers to userspace, following the same convention as the drivers/ide implementation of the same ioctl. This is needed to support ATA commands like CHECK POWER MODE, which return information in nsectors. This fixes "hdparm -C" on SATA drives. Forcing the sense data read via the cc flag causes spurious check conditions, so we filter these out (following the ATA command pass-through specification T10/04-262r7). Signed-off-by: Eran Tromer Acked-by: Tejun Heo Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/ata/libata-scsi.c | 46 +++++++++++++++++++++++++++++++++++++++------- 1 file changed, 39 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index b0d0cc41f3e..7af2a4ba499 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -164,10 +164,10 @@ int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg) { int rc = 0; u8 scsi_cmd[MAX_COMMAND_SIZE]; - u8 args[4], *argbuf = NULL; + u8 args[4], *argbuf = NULL, *sensebuf = NULL; int argsize = 0; - struct scsi_sense_hdr sshdr; enum dma_data_direction data_dir; + int cmd_result; if (arg == NULL) return -EINVAL; @@ -175,6 +175,10 @@ int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg) if (copy_from_user(args, arg, sizeof(args))) return -EFAULT; + sensebuf = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_NOIO); + if (!sensebuf) + return -ENOMEM; + memset(scsi_cmd, 0, sizeof(scsi_cmd)); if (args[3]) { @@ -191,7 +195,7 @@ int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg) data_dir = DMA_FROM_DEVICE; } else { scsi_cmd[1] = (3 << 1); /* Non-data */ - /* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */ + scsi_cmd[2] = 0x20; /* cc but no off.line or data xfer */ data_dir = DMA_NONE; } @@ -210,18 +214,46 @@ int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg) /* Good values for timeout and retries? Values below from scsi_ioctl_send_command() for default case... */ - if (scsi_execute_req(scsidev, scsi_cmd, data_dir, argbuf, argsize, - &sshdr, (10*HZ), 5)) { + cmd_result = scsi_execute(scsidev, scsi_cmd, data_dir, argbuf, argsize, + sensebuf, (10*HZ), 5, 0); + + if (driver_byte(cmd_result) == DRIVER_SENSE) {/* sense data available */ + u8 *desc = sensebuf + 8; + cmd_result &= ~(0xFF<<24); /* DRIVER_SENSE is not an error */ + + /* If we set cc then ATA pass-through will cause a + * check condition even if no error. Filter that. */ + if (cmd_result & SAM_STAT_CHECK_CONDITION) { + struct scsi_sense_hdr sshdr; + scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE, + &sshdr); + if (sshdr.sense_key==0 && + sshdr.asc==0 && sshdr.ascq==0) + cmd_result &= ~SAM_STAT_CHECK_CONDITION; + } + + /* Send userspace a few ATA registers (same as drivers/ide) */ + if (sensebuf[0] == 0x72 && /* format is "descriptor" */ + desc[0] == 0x09 ) { /* code is "ATA Descriptor" */ + args[0] = desc[13]; /* status */ + args[1] = desc[3]; /* error */ + args[2] = desc[5]; /* sector count (0:7) */ + if (copy_to_user(arg, args, sizeof(args))) + rc = -EFAULT; + } + } + + + if (cmd_result) { rc = -EIO; goto error; } - /* Need code to retrieve data from check condition? */ - if ((argbuf) && copy_to_user(arg + sizeof(args), argbuf, argsize)) rc = -EFAULT; error: + kfree(sensebuf); kfree(argbuf); return rc; } -- cgit v1.2.3 From a83068bbaca39197dca26287c16186baee615f0a Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 11 Oct 2006 04:46:52 -0400 Subject: [libata] sata_promise: add PCI ID Noticed by Steve Brown Signed-off-by: Jeff Garzik --- drivers/ata/sata_promise.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index d636ede064a..1eb0d63c17d 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -260,6 +260,7 @@ static const struct pci_device_id pdc_ata_pci_tbl[] = { #if 0 { PCI_VDEVICE(PROMISE, 0x3570), board_20771 }, #endif + { PCI_VDEVICE(PROMISE, 0x3577), board_20771 }, { } /* terminate list */ }; -- cgit v1.2.3 From 53e36ada37cb8b01cfbf674580a79edc0bb764c7 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Mon, 9 Oct 2006 09:53:09 +0200 Subject: [PATCH] pata-qdi: fix le32 in data_xfer The following tiny patch fixes a typo in qdi_data_xfer (le32 instead of le16). Signed-off-by: Peter Korsgaard Signed-off-by: Jeff Garzik --- drivers/ata/pata_qdi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c index 7977f471d5e..2c3cc0ccc60 100644 --- a/drivers/ata/pata_qdi.c +++ b/drivers/ata/pata_qdi.c @@ -141,7 +141,7 @@ static void qdi_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned memcpy(&pad, buf + buflen - slop, slop); outl(le32_to_cpu(pad), ap->ioaddr.data_addr); } else { - pad = cpu_to_le16(inl(ap->ioaddr.data_addr)); + pad = cpu_to_le32(inl(ap->ioaddr.data_addr)); memcpy(buf + buflen - slop, &pad, slop); } } -- cgit v1.2.3