From 9648f552f9e08548a3979643b99f14c21c7d8f5b Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 12 Nov 2005 16:57:29 +0000 Subject: [ARM] Fix broken sl82c105 DMA prevention We must _never_ _ever_ on pain of death enable IDE DMA on SL82C105 chipsets where the southbridge revision is <= 5, otherwise data corruption will occur. Strangely this used to work, but something has changed in the upper echelons of the IDE layer to break the hosts decision to deny DMA. Let's make it crystal clear to the IDE layer that we know best. Signed-off-by: Russell King --- drivers/ide/pci/sl82c105.c | 80 +++++++++++++++++++++------------------------- 1 file changed, 36 insertions(+), 44 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c index ea0806c82be..6466db5f017 100644 --- a/drivers/ide/pci/sl82c105.c +++ b/drivers/ide/pci/sl82c105.c @@ -399,34 +399,6 @@ static unsigned int __devinit init_chipset_sl82c105(struct pci_dev *dev, const c return dev->irq; } -static void __devinit init_dma_sl82c105(ide_hwif_t *hwif, unsigned long dma_base) -{ - unsigned int rev; - u8 dma_state; - - DBG(("init_dma_sl82c105(hwif: ide%d, dma_base: 0x%08x)\n", hwif->index, dma_base)); - - hwif->autodma = 0; - - if (!dma_base) - return; - - dma_state = hwif->INB(dma_base + 2); - rev = sl82c105_bridge_revision(hwif->pci_dev); - if (rev <= 5) { - printk(" %s: Winbond 553 bridge revision %d, BM-DMA disabled\n", - hwif->name, rev); - dma_state &= ~0x60; - } else { - dma_state |= 0x60; - if (!noautodma) - hwif->autodma = 1; - } - hwif->OUTB(dma_state, dma_base + 2); - - ide_setup_dma(hwif, dma_base, 8); -} - /* * Initialise the chip */ @@ -434,6 +406,8 @@ static void __devinit init_dma_sl82c105(ide_hwif_t *hwif, unsigned long dma_base static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif) { struct pci_dev *dev = hwif->pci_dev; + unsigned int rev; + u8 dma_state; u32 val; DBG(("init_hwif_sl82c105(hwif: ide%d)\n", hwif->index)); @@ -455,33 +429,51 @@ static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif) pci_read_config_dword(dev, 0x40, &val); *((u32 *)&hwif->hwif_data) = val; + hwif->atapi_dma = 0; + hwif->mwdma_mask = 0; + hwif->swdma_mask = 0; + hwif->autodma = 0; + if (!hwif->dma_base) return; - hwif->atapi_dma = 1; - hwif->mwdma_mask = 0x07; - hwif->swdma_mask = 0x07; - + dma_state = hwif->INB(hwif->dma_base + 2) & ~0x60; + rev = sl82c105_bridge_revision(hwif->pci_dev); + if (rev <= 5) { + /* + * Never ever EVER under any circumstances enable + * DMA when the bridge is this old. + */ + printk(" %s: Winbond 553 bridge revision %d, BM-DMA disabled\n", + hwif->name, rev); + } else { #ifdef CONFIG_BLK_DEV_IDEDMA - hwif->ide_dma_check = &sl82c105_check_drive; - hwif->ide_dma_on = &sl82c105_ide_dma_on; - hwif->ide_dma_off_quietly = &sl82c105_ide_dma_off_quietly; - hwif->ide_dma_lostirq = &sl82c105_ide_dma_lost_irq; - hwif->dma_start = &sl82c105_ide_dma_start; - hwif->ide_dma_timeout = &sl82c105_ide_dma_timeout; - - if (!noautodma) - hwif->autodma = 1; - hwif->drives[0].autodma = hwif->autodma; - hwif->drives[1].autodma = hwif->autodma; + dma_state |= 0x60; + + hwif->atapi_dma = 1; + hwif->mwdma_mask = 0x07; + hwif->swdma_mask = 0x07; + + hwif->ide_dma_check = &sl82c105_check_drive; + hwif->ide_dma_on = &sl82c105_ide_dma_on; + hwif->ide_dma_off_quietly = &sl82c105_ide_dma_off_quietly; + hwif->ide_dma_lostirq = &sl82c105_ide_dma_lost_irq; + hwif->dma_start = &sl82c105_ide_dma_start; + hwif->ide_dma_timeout = &sl82c105_ide_dma_timeout; + + if (!noautodma) + hwif->autodma = 1; + hwif->drives[0].autodma = hwif->autodma; + hwif->drives[1].autodma = hwif->autodma; #endif /* CONFIG_BLK_DEV_IDEDMA */ + } + hwif->OUTB(dma_state, hwif->dma_base + 2); } static ide_pci_device_t sl82c105_chipset __devinitdata = { .name = "W82C105", .init_chipset = init_chipset_sl82c105, .init_hwif = init_hwif_sl82c105, - .init_dma = init_dma_sl82c105, .channels = 2, .autodma = NOAUTODMA, .enablebits = {{0x40,0x01,0x01}, {0x40,0x10,0x10}}, -- cgit v1.2.3 From a1510210c45c9af5784d64596c7025997e1add7d Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 12 Nov 2005 17:45:45 +0000 Subject: [ARM] Ensure sl82c105 IDE interfaces are serialized when using DMA We don't want to reset the DMA state machine while the other channel is in use. Signed-off-by: Russell King --- drivers/ide/pci/sl82c105.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c index 6466db5f017..8a5c7b286b2 100644 --- a/drivers/ide/pci/sl82c105.c +++ b/drivers/ide/pci/sl82c105.c @@ -465,6 +465,9 @@ static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif) hwif->autodma = 1; hwif->drives[0].autodma = hwif->autodma; hwif->drives[1].autodma = hwif->autodma; + + if (hwif->mate) + hwif->serialized = hwif->mate->serialized = 1; #endif /* CONFIG_BLK_DEV_IDEDMA */ } hwif->OUTB(dma_state, hwif->dma_base + 2); -- cgit v1.2.3 From 1cf99be560e471a868e14b12c08b0ae383966cec Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 12 Nov 2005 21:49:36 +0000 Subject: [ARM] Use correct IO operations for Pleb Use read/write IO operations rather than in/out, as per other SA1100 platforms. Signed-off-by: Russell King --- drivers/net/smc91x.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index a10cd184d59..5c2824be4ee 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -100,14 +100,14 @@ #define SMC_IO_SHIFT 0 #define SMC_NOWAIT 1 -#define SMC_inb(a, r) inb((a) + (r)) -#define SMC_insb(a, r, p, l) insb((a) + (r), p, (l)) -#define SMC_inw(a, r) inw((a) + (r)) -#define SMC_insw(a, r, p, l) insw((a) + (r), p, l) -#define SMC_outb(v, a, r) outb(v, (a) + (r)) -#define SMC_outsb(a, r, p, l) outsb((a) + (r), p, (l)) -#define SMC_outw(v, a, r) outw(v, (a) + (r)) -#define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l) +#define SMC_inb(a, r) readb((a) + (r)) +#define SMC_insb(a, r, p, l) readsb((a) + (r), p, (l)) +#define SMC_inw(a, r) readw((a) + (r)) +#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) +#define SMC_outb(v, a, r) writeb(v, (a) + (r)) +#define SMC_outsb(a, r, p, l) writesb((a) + (r), p, (l)) +#define SMC_outw(v, a, r) writew(v, (a) + (r)) +#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) #define set_irq_type(irq, type) do {} while (0) -- cgit v1.2.3