From 7c60e1caa5ddaf7605a8baa91a7d5b6f9c324385 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sun, 15 Jul 2007 16:59:01 -0400 Subject: [ISDN] HiSax netjet_u: split setup into 3 smaller functions No behavior changes, just code movement. Prep for PCI hotplug API. Signed-off-by: Jeff Garzik --- drivers/isdn/hisax/nj_u.c | 167 ++++++++++++++++++++++++++-------------------- 1 file changed, 93 insertions(+), 74 deletions(-) (limited to 'drivers') diff --git a/drivers/isdn/hisax/nj_u.c b/drivers/isdn/hisax/nj_u.c index 8202cf34eca..f017d3816b1 100644 --- a/drivers/isdn/hisax/nj_u.c +++ b/drivers/isdn/hisax/nj_u.c @@ -128,93 +128,69 @@ NETjet_U_card_msg(struct IsdnCardState *cs, int mt, void *arg) return(0); } -static struct pci_dev *dev_netjet __devinitdata = NULL; - -int __devinit -setup_netjet_u(struct IsdnCard *card) +static int __devinit nju_pci_probe(struct pci_dev *dev_netjet, + struct IsdnCardState *cs) { - int bytecnt; - struct IsdnCardState *cs = card->cs; - char tmp[64]; -#ifdef CONFIG_PCI -#endif -#ifdef __BIG_ENDIAN -#error "not running on big endian machines now" -#endif - strcpy(tmp, NETjet_U_revision); - printk(KERN_INFO "HiSax: Traverse Tech. NETspider-U driver Rev. %s\n", HiSax_getrev(tmp)); - if (cs->typ != ISDN_CTYPE_NETJET_U) + if (pci_enable_device(dev_netjet)) return(0); - test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags); - -#ifdef CONFIG_PCI + pci_set_master(dev_netjet); + cs->irq = dev_netjet->irq; + if (!cs->irq) { + printk(KERN_WARNING "NETspider-U: No IRQ for PCI card found\n"); + return(0); + } + cs->hw.njet.base = pci_resource_start(dev_netjet, 0); + if (!cs->hw.njet.base) { + printk(KERN_WARNING "NETspider-U: No IO-Adr for PCI card found\n"); + return(0); + } - for ( ;; ) - { - if ((dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET, - PCI_DEVICE_ID_TIGERJET_300, dev_netjet))) { - if (pci_enable_device(dev_netjet)) - return(0); - pci_set_master(dev_netjet); - cs->irq = dev_netjet->irq; - if (!cs->irq) { - printk(KERN_WARNING "NETspider-U: No IRQ for PCI card found\n"); - return(0); - } - cs->hw.njet.base = pci_resource_start(dev_netjet, 0); - if (!cs->hw.njet.base) { - printk(KERN_WARNING "NETspider-U: No IO-Adr for PCI card found\n"); - return(0); - } - } else { - printk(KERN_WARNING "NETspider-U: No PCI card found\n"); - return(0); - } + return (1); +} - cs->hw.njet.auxa = cs->hw.njet.base + NETJET_AUXDATA; - cs->hw.njet.isac = cs->hw.njet.base | NETJET_ISAC_OFF; - mdelay(10); +static int __devinit nju_cs_init(struct IsdnCard *card, + struct IsdnCardState *cs) +{ + cs->hw.njet.auxa = cs->hw.njet.base + NETJET_AUXDATA; + cs->hw.njet.isac = cs->hw.njet.base | NETJET_ISAC_OFF; + mdelay(10); - cs->hw.njet.ctrl_reg = 0xff; /* Reset On */ - byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg); - mdelay(10); + cs->hw.njet.ctrl_reg = 0xff; /* Reset On */ + byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg); + mdelay(10); - cs->hw.njet.ctrl_reg = 0x00; /* Reset Off and status read clear */ - byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg); - mdelay(10); + cs->hw.njet.ctrl_reg = 0x00; /* Reset Off and status read clear */ + byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg); + mdelay(10); - cs->hw.njet.auxd = 0xC0; - cs->hw.njet.dmactrl = 0; + cs->hw.njet.auxd = 0xC0; + cs->hw.njet.dmactrl = 0; - byteout(cs->hw.njet.auxa, 0); - byteout(cs->hw.njet.base + NETJET_AUXCTRL, ~NETJET_ISACIRQ); - byteout(cs->hw.njet.base + NETJET_IRQMASK1, NETJET_ISACIRQ); - byteout(cs->hw.njet.auxa, cs->hw.njet.auxd); + byteout(cs->hw.njet.auxa, 0); + byteout(cs->hw.njet.base + NETJET_AUXCTRL, ~NETJET_ISACIRQ); + byteout(cs->hw.njet.base + NETJET_IRQMASK1, NETJET_ISACIRQ); + byteout(cs->hw.njet.auxa, cs->hw.njet.auxd); - switch ( ( ( NETjet_ReadIC( cs, ICC_RBCH ) >> 5 ) & 3 ) ) - { - case 3 : - break; + switch ( ( ( NETjet_ReadIC( cs, ICC_RBCH ) >> 5 ) & 3 ) ) + { + case 3 : + return 1; /* end loop */ - case 0 : - printk( KERN_WARNING "NETspider-U: NETjet-S PCI card found\n" ); - continue; + case 0 : + printk( KERN_WARNING "NETspider-U: NETjet-S PCI card found\n" ); + return -1; /* continue looping */ - default : - printk( KERN_WARNING "NETspider-U: No PCI card found\n" ); - return 0; - } - break; + default : + printk( KERN_WARNING "NETspider-U: No PCI card found\n" ); + return 0; /* end loop & function */ } -#else - - printk(KERN_WARNING "NETspider-U: NO_PCI_BIOS\n"); - printk(KERN_WARNING "NETspider-U: unable to config NETspider-U PCI\n"); - return (0); - -#endif /* CONFIG_PCI */ + return 1; /* end loop */ +} - bytecnt = 256; +static int __devinit nju_cs_init_rest(struct IsdnCard *card, + struct IsdnCardState *cs) +{ + const int bytecnt = 256; printk(KERN_INFO "NETspider-U: PCI card configured at %#lx IRQ %d\n", @@ -239,5 +215,48 @@ setup_netjet_u(struct IsdnCard *card) cs->irq_func = &netjet_u_interrupt; cs->irq_flags |= IRQF_SHARED; ICCVersion(cs, "NETspider-U:"); + return (1); } + +static struct pci_dev *dev_netjet __devinitdata = NULL; + +int __devinit +setup_netjet_u(struct IsdnCard *card) +{ + int ret; + struct IsdnCardState *cs = card->cs; + char tmp[64]; + +#ifdef __BIG_ENDIAN +#error "not running on big endian machines now" +#endif + + strcpy(tmp, NETjet_U_revision); + printk(KERN_INFO "HiSax: Traverse Tech. NETspider-U driver Rev. %s\n", HiSax_getrev(tmp)); + if (cs->typ != ISDN_CTYPE_NETJET_U) + return(0); + test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags); + + for ( ;; ) + { + if ((dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET, + PCI_DEVICE_ID_TIGERJET_300, dev_netjet))) { + ret = nju_pci_probe(dev_netjet, cs); + if (!ret) + return(0); + } else { + printk(KERN_WARNING "NETspider-U: No PCI card found\n"); + return(0); + } + + ret = nju_cs_init(card, cs); + if (!ret) + return (0); + if (ret > 0) + break; + /* ret < 0 == continue looping */ + } + + return nju_cs_init_rest(card, cs); +} -- cgit v1.2.3