From 18b2466c3050e23c98bb69bd3f35295ff8164851 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 8 Aug 2007 14:28:49 +0100 Subject: libata-core: Allow translation setting to fail On some early drives (pre ATA1) this feature is not supported. If it fails then we know the drive geometry is the hardware geometry and the one we tried to set anyway so just carry on. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 2ad4dda6d4a..9cf46bf8c8d 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -3985,6 +3985,11 @@ static unsigned int ata_dev_init_params(struct ata_device *dev, tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */ err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); + /* A clean abort indicates an original or just out of spec drive + and we should continue as we issue the setup based on the + drive reported working geometry */ + if (err_mask == AC_ERR_DEV && (tf.feature & ATA_ABORTED)) + err_mask = 0; DPRINTK("EXIT, err_mask=%x\n", err_mask); return err_mask; -- cgit v1.2.3 From c5cf0ffa71d32c03607d287b76483479afb0bcd3 Mon Sep 17 00:00:00 2001 From: Jason Gaston Date: Thu, 30 Aug 2007 21:36:56 -0700 Subject: ata_piix: IDE mode SATA patch for Intel Tolapai Resend trying to remove 8-bit characters in the email. This patch adds the Intel Tolapai IDE mode SATA controller DID's. Signed-off-by: Jason Gaston Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 071d274afaa..127deb87a33 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -130,6 +130,7 @@ enum { ich6m_sata_ahci = 8, ich8_sata_ahci = 9, piix_pata_mwdma = 10, /* PIIX3 MWDMA only */ + tolapai_sata_ahci = 11, /* constants for mapping table */ P0 = 0, /* port 0 */ @@ -253,6 +254,8 @@ static const struct pci_device_id piix_pci_tbl[] = { { 0x8086, 0x292d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci }, /* SATA Controller IDE (ICH9M) */ { 0x8086, 0x292e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci }, + /* SATA Controller IDE (Tolapai) */ + { 0x8086, 0x5028, PCI_ANY_ID, PCI_ANY_ID, 0, 0, tolapai_sata_ahci }, { } /* terminate list */ }; @@ -441,12 +444,25 @@ static const struct piix_map_db ich8_map_db = { }, }; +static const struct piix_map_db tolapai_map_db = { + .mask = 0x3, + .port_enable = 0x3, + .map = { + /* PM PS SM SS MAP */ + { P0, NA, P1, NA }, /* 00b */ + { RV, RV, RV, RV }, /* 01b */ + { RV, RV, RV, RV }, /* 10b */ + { RV, RV, RV, RV }, + }, +}; + static const struct piix_map_db *piix_map_db_table[] = { [ich5_sata] = &ich5_map_db, [ich6_sata] = &ich6_map_db, [ich6_sata_ahci] = &ich6_map_db, [ich6m_sata_ahci] = &ich6m_map_db, [ich8_sata_ahci] = &ich8_map_db, + [tolapai_sata_ahci] = &tolapai_map_db, }; static struct ata_port_info piix_port_info[] = { @@ -560,6 +576,17 @@ static struct ata_port_info piix_port_info[] = { .mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ .port_ops = &piix_pata_ops, }, + + /* tolapai_sata_ahci: 11: */ + { + .sht = &piix_sht, + .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR | + PIIX_FLAG_AHCI, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = ATA_UDMA6, + .port_ops = &piix_sata_ops, + }, }; static struct pci_bits piix_enable_bits[] = { -- cgit v1.2.3 From 3cc0b9d3baeb6103d87743e4737a4b6eda30d399 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 25 Aug 2007 08:31:02 +0900 Subject: ata_piix: add Satellite U200 to broken suspend list Satellite U200 also shares the problem. Add it to the broken suspend list. Original patch from John Schember. Signed-off-by: Tejun Heo Cc: John Schember Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 127deb87a33..22752e46b34 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -934,6 +934,13 @@ static int piix_broken_suspend(void) DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M7"), }, }, + { + .ident = "Satellite U200", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U200"), + }, + }, { .ident = "Satellite U205", .matches = { -- cgit v1.2.3 From d36ee189f392ea89de85124a0b58477bb0f2e0a6 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 23 Aug 2007 20:19:55 +0100 Subject: pata_marvell: Add more identifiers This replaces the patch which incorrectly removed the 6145 Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/pata_marvell.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c index 87594c04d3a..ae206f35f74 100644 --- a/drivers/ata/pata_marvell.c +++ b/drivers/ata/pata_marvell.c @@ -192,6 +192,8 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i static const struct pci_device_id marvell_pci_tbl[] = { { PCI_DEVICE(0x11AB, 0x6101), }, + { PCI_DEVICE(0x11AB, 0x6121), }, + { PCI_DEVICE(0x11AB, 0x6123), }, { PCI_DEVICE(0x11AB, 0x6145), }, { } /* terminate list */ }; -- cgit v1.2.3 From 7f9992a23190418592f0810900e4f91546ec41da Mon Sep 17 00:00:00 2001 From: Mikael Pettersson Date: Wed, 29 Aug 2007 10:25:37 +0200 Subject: sata_promise: FastTrack TX4200 is a second-generation chip This patch corrects sata_promise to classify FastTrack TX4200 (DID 3515/3519) as a second-generation chip. Promise's partial- source FT TX4200 driver confirms this classification. Treating it as a first-generation chip causes several problems: 1. Detection failures. This is a recent regression triggered by the hotplug-enabling changes in 2.6.23-rc1. 2. Various "failed to resume link for reset" warnings. This patch fixes . Thanks to Stephen Ziemba for reporting the bug and for testing the fix. Signed-off-by: Mikael Pettersson Tested-by: Stephen Ziemba Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/ata/sata_promise.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index d39ebc23c4a..25698cf0dce 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -45,7 +45,7 @@ #include "sata_promise.h" #define DRV_NAME "sata_promise" -#define DRV_VERSION "2.09" +#define DRV_VERSION "2.10" enum { PDC_MAX_PORTS = 4, @@ -328,8 +328,8 @@ static const struct pci_device_id pdc_ata_pci_tbl[] = { { PCI_VDEVICE(PROMISE, 0x3318), board_20319 }, { PCI_VDEVICE(PROMISE, 0x3319), board_20319 }, - { PCI_VDEVICE(PROMISE, 0x3515), board_20319 }, - { PCI_VDEVICE(PROMISE, 0x3519), board_20319 }, + { PCI_VDEVICE(PROMISE, 0x3515), board_40518 }, + { PCI_VDEVICE(PROMISE, 0x3519), board_40518 }, { PCI_VDEVICE(PROMISE, 0x3d17), board_40518 }, { PCI_VDEVICE(PROMISE, 0x3d18), board_40518 }, -- cgit v1.2.3 From 16c55b038033d8f6f7601996dfae44399666d9ab Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 29 Aug 2007 11:58:33 +0900 Subject: libata: implement BROKEN_HPA horkage and apply it to affected drives Some drives choke on READ_NATIVE_MAX_ADDRESS[_EXT]. Implement ATA_HORKAGE_BROKEN_HPA and apply it to affected drives. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 9cf46bf8c8d..a3ee087223d 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1911,8 +1911,9 @@ int ata_dev_configure(struct ata_device *dev) dev->flags |= ATA_DFLAG_FLUSH_EXT; } - if (ata_id_hpa_enabled(dev->id)) - dev->n_sectors = ata_hpa_resize(dev); + if (!(dev->horkage & ATA_HORKAGE_BROKEN_HPA) && + ata_id_hpa_enabled(dev->id)) + dev->n_sectors = ata_hpa_resize(dev); /* config NCQ */ ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc)); @@ -3795,7 +3796,11 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "ST9160821AS", "3.CLF", ATA_HORKAGE_NONCQ, }, { "SAMSUNG HD401LJ", "ZZ100-15", ATA_HORKAGE_NONCQ, }, - /* Devices with NCQ limits */ + /* devices which puke on READ_NATIVE_MAX */ + { "HDS724040KLSA80", "KFAOA20N", ATA_HORKAGE_BROKEN_HPA, }, + { "WDC WD3200JD-00KLB0", "WD-WCAMR1130137", ATA_HORKAGE_BROKEN_HPA }, + { "WDC WD2500JD-00HBB0", "WD-WMAL71490727", ATA_HORKAGE_BROKEN_HPA }, + { "MAXTOR 6L080L4", "A93.0500", ATA_HORKAGE_BROKEN_HPA }, /* End Marker */ { } -- cgit v1.2.3 From 43a98f05d99205687ddf74089e79a8312c8c5f90 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 23 Aug 2007 10:15:18 +0900 Subject: ata_piix: implement IOCFG bit18 quirk Some notebooks need bit18 of IOCFG to be cleared for the drive bay to work even though the bit is NOOP according to the datasheet. This patch implement IOCFG bit18 quirk and apply it to Clevo M570U. http://bugzilla.kernel.org/show_bug.cgi?id=8051 Signed-off-by: Tejun Heo Cc: D. Angelis Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 22752e46b34..0ff96a06374 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1173,6 +1173,39 @@ static void __devinit piix_init_sata_map(struct pci_dev *pdev, hpriv->map = map; } +static void piix_iocfg_bit18_quirk(struct pci_dev *pdev) +{ + static struct dmi_system_id sysids[] = { + { + /* Clevo M570U sets IOCFG bit 18 if the cdrom + * isn't used to boot the system which + * disables the channel. + */ + .ident = "M570U", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Clevo Co."), + DMI_MATCH(DMI_PRODUCT_NAME, "M570U"), + }, + }, + }; + u32 iocfg; + + if (!dmi_check_system(sysids)) + return; + + /* The datasheet says that bit 18 is NOOP but certain systems + * seem to use it to disable a channel. Clear the bit on the + * affected systems. + */ + pci_read_config_dword(pdev, PIIX_IOCFG, &iocfg); + if (iocfg & (1 << 18)) { + dev_printk(KERN_INFO, &pdev->dev, + "applying IOCFG bit18 quirk\n"); + iocfg &= ~(1 << 18); + pci_write_config_dword(pdev, PIIX_IOCFG, iocfg); + } +} + /** * piix_init_one - Register PIIX ATA PCI device with kernel services * @pdev: PCI device to register @@ -1234,6 +1267,9 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) piix_map_db_table[ent->driver_data]); } + /* apply IOCFG bit18 quirk */ + piix_iocfg_bit18_quirk(pdev); + /* On ICH5, some BIOSen disable the interrupt using the * PCI_COMMAND_INTX_DISABLE bit added in PCI 2.3. * On ICH6, this bit has the same effect, but only when -- cgit v1.2.3 From 2a3103ce4357a09c2289405f969acec0edf4398f Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Fri, 31 Aug 2007 04:54:06 -0400 Subject: [libata] Bump driver versions Bump the versions for drivers that were modified, but had not already had a version number bump. Signed-off-by: Jeff Garzik --- drivers/ata/ata_generic.c | 2 +- drivers/ata/ata_piix.c | 2 +- drivers/ata/pata_ali.c | 2 +- drivers/ata/pata_amd.c | 2 +- drivers/ata/pata_atiixp.c | 2 +- drivers/ata/pata_cs5520.c | 2 +- drivers/ata/pata_cs5530.c | 2 +- drivers/ata/pata_isapnp.c | 2 +- drivers/ata/pata_it821x.c | 2 +- drivers/ata/pata_mpc52xx.c | 2 +- drivers/ata/pata_pcmcia.c | 2 +- drivers/ata/pata_pdc2027x.c | 2 +- drivers/ata/pata_platform.c | 2 +- drivers/ata/pata_sc1200.c | 2 +- drivers/ata/pata_scc.c | 2 +- drivers/ata/pata_serverworks.c | 2 +- drivers/ata/pata_sil680.c | 2 +- drivers/ata/pata_sl82c105.c | 2 +- drivers/ata/pdc_adma.c | 2 +- drivers/ata/sata_inic162x.c | 2 +- drivers/ata/sata_mv.c | 2 +- drivers/ata/sata_nv.c | 2 +- drivers/ata/sata_qstor.c | 2 +- drivers/ata/sata_sil.c | 2 +- drivers/ata/sata_sil24.c | 2 +- drivers/ata/sata_sis.c | 2 +- drivers/ata/sata_svw.c | 2 +- drivers/ata/sata_sx4.c | 2 +- drivers/ata/sata_uli.c | 2 +- drivers/ata/sata_via.c | 2 +- drivers/ata/sata_vsc.c | 2 +- 31 files changed, 31 insertions(+), 31 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c index 430fcf4f9ef..94546695472 100644 --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c @@ -26,7 +26,7 @@ #include #define DRV_NAME "ata_generic" -#define DRV_VERSION "0.2.12" +#define DRV_VERSION "0.2.13" /* * A generic parallel ATA driver using libata diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 0ff96a06374..e40c94f5f59 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -94,7 +94,7 @@ #include #define DRV_NAME "ata_piix" -#define DRV_VERSION "2.11" +#define DRV_VERSION "2.12" enum { PIIX_IOCFG = 0x54, /* IDE I/O configuration register */ diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index e8a28e94fe4..94e5edc12ac 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -34,7 +34,7 @@ #include #define DRV_NAME "pata_ali" -#define DRV_VERSION "0.7.4" +#define DRV_VERSION "0.7.5" /* * Cable special cases diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index b09facad63e..04048fcf630 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -25,7 +25,7 @@ #include #define DRV_NAME "pata_amd" -#define DRV_VERSION "0.3.8" +#define DRV_VERSION "0.3.9" /** * timing_setup - shared timing computation and load diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c index 80509be49e7..86f85a2cab7 100644 --- a/drivers/ata/pata_atiixp.c +++ b/drivers/ata/pata_atiixp.c @@ -22,7 +22,7 @@ #include #define DRV_NAME "pata_atiixp" -#define DRV_VERSION "0.4.5" +#define DRV_VERSION "0.4.6" enum { ATIIXP_IDE_PIO_TIMING = 0x40, diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c index 7dc76e71bd5..e2459088cdc 100644 --- a/drivers/ata/pata_cs5520.c +++ b/drivers/ata/pata_cs5520.c @@ -41,7 +41,7 @@ #include #define DRV_NAME "pata_cs5520" -#define DRV_VERSION "0.6.5" +#define DRV_VERSION "0.6.6" struct pio_clocks { diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c index 68f150a1e2f..c6066aa43ec 100644 --- a/drivers/ata/pata_cs5530.c +++ b/drivers/ata/pata_cs5530.c @@ -35,7 +35,7 @@ #include #define DRV_NAME "pata_cs5530" -#define DRV_VERSION "0.7.3" +#define DRV_VERSION "0.7.4" static void __iomem *cs5530_port_base(struct ata_port *ap) { diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c index 91a396fa5b2..9e553c54203 100644 --- a/drivers/ata/pata_isapnp.c +++ b/drivers/ata/pata_isapnp.c @@ -17,7 +17,7 @@ #include #define DRV_NAME "pata_isapnp" -#define DRV_VERSION "0.2.1" +#define DRV_VERSION "0.2.2" static struct scsi_host_template isapnp_sht = { .module = THIS_MODULE, diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index 7225124d96c..ed637ae33ec 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -80,7 +80,7 @@ #define DRV_NAME "pata_it821x" -#define DRV_VERSION "0.3.7" +#define DRV_VERSION "0.3.8" struct it821x_dev { diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c index 182e83c9047..099f4cdc4cd 100644 --- a/drivers/ata/pata_mpc52xx.c +++ b/drivers/ata/pata_mpc52xx.c @@ -24,7 +24,7 @@ #define DRV_NAME "mpc52xx_ata" -#define DRV_VERSION "0.1.0ac2" +#define DRV_VERSION "0.1.2" /* Private structures used by the driver */ diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 6da23feed03..0f2b027624d 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -42,7 +42,7 @@ #define DRV_NAME "pata_pcmcia" -#define DRV_VERSION "0.3.1" +#define DRV_VERSION "0.3.2" /* * Private data structure to glue stuff together diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c index e3245b36269..bb64a986e8f 100644 --- a/drivers/ata/pata_pdc2027x.c +++ b/drivers/ata/pata_pdc2027x.c @@ -35,7 +35,7 @@ #include #define DRV_NAME "pata_pdc2027x" -#define DRV_VERSION "0.9" +#define DRV_VERSION "1.0" #undef PDC_DEBUG #ifdef PDC_DEBUG diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c index a909f793ffc..5086d03f2d7 100644 --- a/drivers/ata/pata_platform.c +++ b/drivers/ata/pata_platform.c @@ -22,7 +22,7 @@ #include #define DRV_NAME "pata_platform" -#define DRV_VERSION "1.0" +#define DRV_VERSION "1.1" static int pio_mask = 1; diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c index b8b2d11e418..5edf67b1f3b 100644 --- a/drivers/ata/pata_sc1200.c +++ b/drivers/ata/pata_sc1200.c @@ -40,7 +40,7 @@ #include #define DRV_NAME "sc1200" -#define DRV_VERSION "0.2.5" +#define DRV_VERSION "0.2.6" #define SC1200_REV_A 0x00 #define SC1200_REV_B1 0x01 diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index 36cdbd2b0bd..2d048ef25a5 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -43,7 +43,7 @@ #include #define DRV_NAME "pata_scc" -#define DRV_VERSION "0.2" +#define DRV_VERSION "0.3" #define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4 diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c index 89691541fe5..0faf99c8f13 100644 --- a/drivers/ata/pata_serverworks.c +++ b/drivers/ata/pata_serverworks.c @@ -41,7 +41,7 @@ #include #define DRV_NAME "pata_serverworks" -#define DRV_VERSION "0.4.1" +#define DRV_VERSION "0.4.2" #define SVWKS_CSB5_REVISION_NEW 0x92 /* min PCI_REVISION_ID for UDMA5 (A2.0) */ #define SVWKS_CSB6_REVISION 0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */ diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c index b0cd52d6e3f..40395804a66 100644 --- a/drivers/ata/pata_sil680.c +++ b/drivers/ata/pata_sil680.c @@ -33,7 +33,7 @@ #include #define DRV_NAME "pata_sil680" -#define DRV_VERSION "0.4.6" +#define DRV_VERSION "0.4.7" #define SIL680_MMIO_BAR 5 diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c index 8c2813aa6cd..c0f43bb2595 100644 --- a/drivers/ata/pata_sl82c105.c +++ b/drivers/ata/pata_sl82c105.c @@ -26,7 +26,7 @@ #include #define DRV_NAME "pata_sl82c105" -#define DRV_VERSION "0.3.1" +#define DRV_VERSION "0.3.2" enum { /* diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c index bec1de594de..5c79271401a 100644 --- a/drivers/ata/pdc_adma.c +++ b/drivers/ata/pdc_adma.c @@ -44,7 +44,7 @@ #include #define DRV_NAME "pdc_adma" -#define DRV_VERSION "0.06" +#define DRV_VERSION "1.0" /* macro to calculate base address for ATA regs */ #define ADMA_ATA_REGS(base,port_no) ((base) + ((port_no) * 0x40)) diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c index a9c948d7604..fdbed8ecdfc 100644 --- a/drivers/ata/sata_inic162x.c +++ b/drivers/ata/sata_inic162x.c @@ -28,7 +28,7 @@ #include #define DRV_NAME "sata_inic162x" -#define DRV_VERSION "0.2" +#define DRV_VERSION "0.3" enum { MMIO_BAR = 5, diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 3acf65e75eb..11bf6c7ac12 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -72,7 +72,7 @@ #include #define DRV_NAME "sata_mv" -#define DRV_VERSION "0.81" +#define DRV_VERSION "1.0" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index 0b58c4df6fd..40dc7313985 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -49,7 +49,7 @@ #include #define DRV_NAME "sata_nv" -#define DRV_VERSION "3.4" +#define DRV_VERSION "3.5" #define NV_ADMA_DMA_BOUNDARY 0xffffffffUL diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c index c8f9242e7f4..5e1dfdda698 100644 --- a/drivers/ata/sata_qstor.c +++ b/drivers/ata/sata_qstor.c @@ -39,7 +39,7 @@ #include #define DRV_NAME "sata_qstor" -#define DRV_VERSION "0.08" +#define DRV_VERSION "0.09" enum { QS_MMIO_BAR = 4, diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index db676375895..8c72e714b45 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -46,7 +46,7 @@ #include #define DRV_NAME "sata_sil" -#define DRV_VERSION "2.2" +#define DRV_VERSION "2.3" enum { SIL_MMIO_BAR = 5, diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index 46fbbe7f121..ef83e6b1e31 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -30,7 +30,7 @@ #include #define DRV_NAME "sata_sil24" -#define DRV_VERSION "0.9" +#define DRV_VERSION "1.0" /* * Port request block (PRB) 32 bytes diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c index 31a2f55aae6..41c1d6e8f1f 100644 --- a/drivers/ata/sata_sis.c +++ b/drivers/ata/sata_sis.c @@ -43,7 +43,7 @@ #include "sis.h" #define DRV_NAME "sata_sis" -#define DRV_VERSION "0.8" +#define DRV_VERSION "1.0" enum { sis_180 = 0, diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c index 92e87707503..d9678e7bc3a 100644 --- a/drivers/ata/sata_svw.c +++ b/drivers/ata/sata_svw.c @@ -53,7 +53,7 @@ #endif /* CONFIG_PPC_OF */ #define DRV_NAME "sata_svw" -#define DRV_VERSION "2.2" +#define DRV_VERSION "2.3" enum { /* ap->flags bits */ diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c index 5193bd8647b..97aefdd87be 100644 --- a/drivers/ata/sata_sx4.c +++ b/drivers/ata/sata_sx4.c @@ -92,7 +92,7 @@ #include "sata_promise.h" #define DRV_NAME "sata_sx4" -#define DRV_VERSION "0.11" +#define DRV_VERSION "0.12" enum { diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c index 78c28512f01..e6b8b45279a 100644 --- a/drivers/ata/sata_uli.c +++ b/drivers/ata/sata_uli.c @@ -36,7 +36,7 @@ #include #define DRV_NAME "sata_uli" -#define DRV_VERSION "1.2" +#define DRV_VERSION "1.3" enum { uli_5289 = 0, diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 86b7bfc1732..a4e631766ee 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -46,7 +46,7 @@ #include #define DRV_NAME "sata_via" -#define DRV_VERSION "2.2" +#define DRV_VERSION "2.3" enum board_ids_enum { vt6420, diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c index 24344d0d057..1920915dfa2 100644 --- a/drivers/ata/sata_vsc.c +++ b/drivers/ata/sata_vsc.c @@ -47,7 +47,7 @@ #include #define DRV_NAME "sata_vsc" -#define DRV_VERSION "2.2" +#define DRV_VERSION "2.3" enum { VSC_MMIO_BAR = 0, -- cgit v1.2.3