From 4ae0a6c15efcc37e94e3f30e3533bdec03c53126 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Tue, 9 Mar 2010 14:14:51 -0600 Subject: [SCSI] libiscsi: Fix recovery slowdown regression We could be failing/stopping a connection due to libiscsi starting recovery/cleanup, but the xmit path or scsi eh thread path could be dropping the connection at the same time. As a result the session->state gets set to failed instead of in recovery. We end up not blocking the session and so the replacement timeout never gets started and we only end up failing the IO when scsi_softirq_done sees that the cmd has been running for (cmd->allowed + 1) * rq->timeout secs. We used to fail the IO right away so users are seeing a long delay when using dm-multipath. This problem was added in 2.6.28. Signed-off-by: Mike Christie Cc: stable@kernel.org Signed-off-by: James Bottomley --- drivers/scsi/libiscsi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 685eaec5321..7688b8f83e9 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -3087,14 +3087,15 @@ static void iscsi_start_session_recovery(struct iscsi_session *session, session->state = ISCSI_STATE_TERMINATE; else if (conn->stop_stage != STOP_CONN_RECOVER) session->state = ISCSI_STATE_IN_RECOVERY; + + old_stop_stage = conn->stop_stage; + conn->stop_stage = flag; spin_unlock_bh(&session->lock); del_timer_sync(&conn->transport_timer); iscsi_suspend_tx(conn); spin_lock_bh(&session->lock); - old_stop_stage = conn->stop_stage; - conn->stop_stage = flag; conn->c_stage = ISCSI_CONN_STOPPED; spin_unlock_bh(&session->lock); -- cgit v1.2.3 From d88a714bfefa7aed7b9cb6c3721707fcd056b472 Mon Sep 17 00:00:00 2001 From: Sarang Radke Date: Wed, 10 Mar 2010 04:03:04 -0600 Subject: [SCSI] scsi_transport_fc: Make sure commands are completed when rport is offline blk_end_request doesn't complete a bidi request successfully The unfinished request eventually triggers a panic in timeout handling routine fc_bsg_job_timeout as req->special is NULL Use blk_end_request_all to end the request unconditionally Signed-off-by: Lalit Chandivade Acked-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_fc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index 1d5b72173dd..e37aeeb407f 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -3852,7 +3852,7 @@ fc_bsg_request_handler(struct request_queue *q, struct Scsi_Host *shost, if (rport && (rport->port_state != FC_PORTSTATE_ONLINE)) { req->errors = -ENXIO; spin_unlock_irq(q->queue_lock); - blk_end_request(req, -ENXIO, blk_rq_bytes(req)); + blk_end_request_all(req, -ENXIO); spin_lock_irq(q->queue_lock); continue; } @@ -3862,7 +3862,7 @@ fc_bsg_request_handler(struct request_queue *q, struct Scsi_Host *shost, ret = fc_req_to_bsgjob(shost, rport, req); if (ret) { req->errors = ret; - blk_end_request(req, ret, blk_rq_bytes(req)); + blk_end_request_all(req, ret); spin_lock_irq(q->queue_lock); continue; } -- cgit v1.2.3 From cad454b12a23c24fd7f409402cf51434655e76c1 Mon Sep 17 00:00:00 2001 From: Santosh Vernekar Date: Fri, 19 Mar 2010 16:59:16 -0700 Subject: [SCSI] qla2xxx: Honour "Extended BB credits" bit for CNAs. We now enable/disable "Additional Receive Credits" in f/w based on nvram parameter "Extended_BB_Credits" bit (i.e. Enhanced-Features: at offset 0x196). This is applicable only for GEN2 CNAs. Signed-off-by: Santosh Vernekar Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_fw.h | 18 +++++++++++++++--- drivers/scsi/qla2xxx/qla_mbx.c | 8 +++++++- 2 files changed, 22 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h index cebf4f1bb7d..42c5587cc50 100644 --- a/drivers/scsi/qla2xxx/qla_fw.h +++ b/drivers/scsi/qla2xxx/qla_fw.h @@ -1592,10 +1592,22 @@ struct nvram_81xx { /* Offset 384. */ uint8_t reserved_21[16]; - uint16_t reserved_22[8]; + uint16_t reserved_22[3]; + + /* + * BIT 0 = Extended BB credits for LR + * BIT 1 = Virtual Fabric Enable + * BIT 2 = Enhanced Features Unused + * BIT 3-7 = Enhanced Features Reserved + */ + /* Enhanced Features */ + uint8_t enhanced_features; + + uint8_t reserved_23; + uint16_t reserved_24[4]; /* Offset 416. */ - uint16_t reserved_23[32]; + uint16_t reserved_25[32]; /* Offset 480. */ uint8_t model_name[16]; @@ -1603,7 +1615,7 @@ struct nvram_81xx { /* Offset 496. */ uint16_t feature_mask_l; uint16_t feature_mask_h; - uint16_t reserved_24[2]; + uint16_t reserved_26[2]; uint16_t subsystem_vendor_id; uint16_t subsystem_device_id; diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 6e53bdbb1da..3ba9a2b5655 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -339,6 +339,7 @@ qla2x00_load_ram(scsi_qla_host_t *vha, dma_addr_t req_dma, uint32_t risc_addr, return rval; } +#define EXTENDED_BB_CREDITS BIT_0 /* * qla2x00_execute_fw * Start adapter firmware. @@ -371,7 +372,12 @@ qla2x00_execute_fw(scsi_qla_host_t *vha, uint32_t risc_addr) mcp->mb[1] = MSW(risc_addr); mcp->mb[2] = LSW(risc_addr); mcp->mb[3] = 0; - mcp->mb[4] = 0; + if (IS_QLA81XX(ha)) { + struct nvram_81xx *nv = ha->nvram; + mcp->mb[4] = (nv->enhanced_features & + EXTENDED_BB_CREDITS); + } else + mcp->mb[4] = 0; mcp->out_mb |= MBX_4|MBX_3|MBX_2|MBX_1; mcp->in_mb |= MBX_1; } else { -- cgit v1.2.3 From 12cec63e40f9b9c2a4766a0f43404a9642062f35 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Fri, 19 Mar 2010 16:59:17 -0700 Subject: [SCSI] qla2xxx: Correct vp_idx checking during PORT_UPDATE processing. Checks should only be done for NPIV-capable ISPs. Original code could result in PORT_UPDATEs being missed on non-NPIV-capable ISPs. Signed-off-by: Andrew Vasquez Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_isr.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index ab90329ff2e..295337d1fcb 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -620,11 +620,10 @@ skip_rio: * vp_idx does not match * Event is not global, vp_idx does not match */ - if ((mb[1] == 0xffff && (mb[3] & 0xff) != 0xff) - || (mb[1] != 0xffff)) { - if (vha->vp_idx != (mb[3] & 0xff)) - break; - } + if (IS_QLA2XXX_MIDTYPE(ha) && + ((mb[1] == 0xffff && (mb[3] & 0xff) != 0xff) || + (mb[1] != 0xffff)) && vha->vp_idx != (mb[3] & 0xff)) + break; /* Global event -- port logout or port unavailable. */ if (mb[1] == 0xffff && mb[2] == 0x7) { -- cgit v1.2.3 From d84a47c2e8d8880d068f23f3033f6f6987717b17 Mon Sep 17 00:00:00 2001 From: Michael Hernandez Date: Fri, 19 Mar 2010 16:59:18 -0700 Subject: [SCSI] qla2xxx: Check to make sure multique and CPU affinity support is not enabled at the same time. The logic is changed to detect this condition based on following 1) both module parameters are off (ql2xmaxqueues and ql2xmultique_tag). 2) both module parameters are on (ql2xmaxqueues and ql2xmultique_tag). 3) The HBA does not support multi queue. Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_os.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 46720b23028..be3f1d3a9c1 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1676,9 +1676,11 @@ skip_pio: /* Determine queue resources */ ha->max_req_queues = ha->max_rsp_queues = 1; - if ((ql2xmaxqueues <= 1 || ql2xmultique_tag < 1) && + if ((ql2xmaxqueues <= 1 && !ql2xmultique_tag) || + (ql2xmaxqueues > 1 && ql2xmultique_tag) || (!IS_QLA25XX(ha) && !IS_QLA81XX(ha))) goto mqiobase_exit; + ha->mqiobase = ioremap(pci_resource_start(ha->pdev, 3), pci_resource_len(ha->pdev, 3)); if (ha->mqiobase) { -- cgit v1.2.3 From 6377a7ae1ab82859edccdbc8eaea63782efb134d Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 19 Mar 2010 16:59:19 -0700 Subject: [SCSI] qla2xxx: Disable MSI on qla24xx chips other than QLA2432. On specific platforms, MSI is unreliable on some of the QLA24xx chips, resulting in fatal I/O errors under load, as reported in and by some RHEL customers. Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_isr.c | 28 +++++++++++++--------------- 1 file changed, 13 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 295337d1fcb..44df0b752ad 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -2271,30 +2271,28 @@ qla2x00_request_irqs(struct qla_hw_data *ha, struct rsp_que *rsp) /* If possible, enable MSI-X. */ if (!IS_QLA2432(ha) && !IS_QLA2532(ha) && - !IS_QLA8432(ha) && !IS_QLA8001(ha)) - goto skip_msix; + !IS_QLA8432(ha) && !IS_QLA8001(ha)) + goto skip_msi; + + if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_HP && + (ha->pdev->subsystem_device == 0x7040 || + ha->pdev->subsystem_device == 0x7041 || + ha->pdev->subsystem_device == 0x1705)) { + DEBUG2(qla_printk(KERN_WARNING, ha, + "MSI-X: Unsupported ISP2432 SSVID/SSDID (0x%X,0x%X).\n", + ha->pdev->subsystem_vendor, + ha->pdev->subsystem_device)); + goto skip_msi; + } if (IS_QLA2432(ha) && (ha->pdev->revision < QLA_MSIX_CHIP_REV_24XX || !QLA_MSIX_FW_MODE_1(ha->fw_attributes))) { DEBUG2(qla_printk(KERN_WARNING, ha, "MSI-X: Unsupported ISP2432 (0x%X, 0x%X).\n", ha->pdev->revision, ha->fw_attributes)); - goto skip_msix; } - if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_HP && - (ha->pdev->subsystem_device == 0x7040 || - ha->pdev->subsystem_device == 0x7041 || - ha->pdev->subsystem_device == 0x1705)) { - DEBUG2(qla_printk(KERN_WARNING, ha, - "MSI-X: Unsupported ISP2432 SSVID/SSDID (0x%X, 0x%X).\n", - ha->pdev->subsystem_vendor, - ha->pdev->subsystem_device)); - - goto skip_msi; - } - ret = qla24xx_enable_msix(ha, rsp); if (!ret) { DEBUG2(qla_printk(KERN_INFO, ha, -- cgit v1.2.3 From d6136f3f749cf68c3295c883cea612afd9919100 Mon Sep 17 00:00:00 2001 From: Santosh Vernekar Date: Fri, 19 Mar 2010 16:59:20 -0700 Subject: [SCSI] qla2xxx: Prevent sending mbx commands from sysfs during isp reset. The fix prevents application path from sending get-firmware-state mbx command during as isp reset. Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_attr.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 90d1e062ec4..35a325266af 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -1274,7 +1274,11 @@ qla2x00_fw_state_show(struct device *dev, struct device_attribute *attr, int rval = QLA_FUNCTION_FAILED; uint16_t state[5]; - if (!vha->hw->flags.eeh_busy) + if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) || + test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags)) + DEBUG2_3_11(printk("%s(%ld): isp reset in progress.\n", + __func__, vha->host_no)); + else if (!vha->hw->flags.eeh_busy) rval = qla2x00_get_firmware_state(vha, state); if (rval != QLA_SUCCESS) memset(state, -1, sizeof(state)); -- cgit v1.2.3 From 89162e9c21de3cb3b7e9e29d50cb7c3e88a09e2b Mon Sep 17 00:00:00 2001 From: Giridhar Malavali Date: Fri, 19 Mar 2010 16:59:21 -0700 Subject: [SCSI] qla2xxx: Updated version number to 8.03.02-k2. Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_version.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index 8d2fc2fa7a6..109068df933 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,9 +7,9 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.03.02-k1" +#define QLA2XXX_VERSION "8.03.02-k2" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 3 #define QLA_DRIVER_PATCH_VER 2 -#define QLA_DRIVER_BETA_VER 1 +#define QLA_DRIVER_BETA_VER 2 -- cgit v1.2.3 From cf7474451c3a3cf07811abbf2a39536d33046c36 Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Fri, 19 Mar 2010 19:37:26 -0300 Subject: [SCSI] advansys: fix regression with request_firmware change On newer kernels users of advansys module are reporting system hang when trying to load it without firmware files present. After looking closely at description on https://qa.mandriva.com/show_bug.cgi?id=53220, I think this is related to commit "[SCSI] advansys: use request_firmware". The problem is that after switch to request_firmware, asc_dvc->err_code isn't being set when firmware files aren't found or loading fails. err_code is used by the driver to judge if there was a fatal error or not, as can be seen for example on advansys_board_found, which will only return -ENODEV when err_code is set. Because err_code isn't being set when request_firmware fails, this is a change of behaviour of the code before request_firmware addition, making it continue to load and it fails later as the firmware wasn't really loaded. Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: James Bottomley --- drivers/scsi/advansys.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c index 22626abdb63..9201afe6560 100644 --- a/drivers/scsi/advansys.c +++ b/drivers/scsi/advansys.c @@ -4781,12 +4781,14 @@ static ushort AscInitAsc1000Driver(ASC_DVC_VAR *asc_dvc) if (err) { printk(KERN_ERR "Failed to load image \"%s\" err %d\n", fwname, err); + asc_dvc->err_code |= ASC_IERR_MCODE_CHKSUM; return err; } if (fw->size < 4) { printk(KERN_ERR "Bogus length %zu in image \"%s\"\n", fw->size, fwname); release_firmware(fw); + asc_dvc->err_code |= ASC_IERR_MCODE_CHKSUM; return -EINVAL; } chksum = (fw->data[3] << 24) | (fw->data[2] << 16) | @@ -5110,12 +5112,14 @@ static int AdvInitAsc3550Driver(ADV_DVC_VAR *asc_dvc) if (err) { printk(KERN_ERR "Failed to load image \"%s\" err %d\n", fwname, err); + asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM; return err; } if (fw->size < 4) { printk(KERN_ERR "Bogus length %zu in image \"%s\"\n", fw->size, fwname); release_firmware(fw); + asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM; return -EINVAL; } chksum = (fw->data[3] << 24) | (fw->data[2] << 16) | @@ -5624,12 +5628,14 @@ static int AdvInitAsc38C0800Driver(ADV_DVC_VAR *asc_dvc) if (err) { printk(KERN_ERR "Failed to load image \"%s\" err %d\n", fwname, err); + asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM; return err; } if (fw->size < 4) { printk(KERN_ERR "Bogus length %zu in image \"%s\"\n", fw->size, fwname); release_firmware(fw); + asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM; return -EINVAL; } chksum = (fw->data[3] << 24) | (fw->data[2] << 16) | @@ -6124,12 +6130,14 @@ static int AdvInitAsc38C1600Driver(ADV_DVC_VAR *asc_dvc) if (err) { printk(KERN_ERR "Failed to load image \"%s\" err %d\n", fwname, err); + asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM; return err; } if (fw->size < 4) { printk(KERN_ERR "Bogus length %zu in image \"%s\"\n", fw->size, fwname); release_firmware(fw); + asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM; return -EINVAL; } chksum = (fw->data[3] << 24) | (fw->data[2] << 16) | -- cgit v1.2.3 From ebd09ec93c90c8ec571d7e166832fb1fc705bf5e Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Sat, 20 Mar 2010 12:44:12 -0500 Subject: [SCSI] attirbute_container: Initialize sysfs attributes with sysfs_attr_init All of the SCSI transport classes are suddenly spitting lockdep warnings. According to Eric Biderman this is because lockdep needs static initialisers and the attribute container way of doing things end up with dynamic sysfs attributes. Fix this by calling sysfs_attr_init which sets the lockdep key correctly. Tested-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/base/attribute_container.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/base/attribute_container.c b/drivers/base/attribute_container.c index b9cda053d3c..8fc200b2e2c 100644 --- a/drivers/base/attribute_container.c +++ b/drivers/base/attribute_container.c @@ -328,6 +328,7 @@ attribute_container_add_attrs(struct device *classdev) return sysfs_create_group(&classdev->kobj, cont->grp); for (i = 0; attrs[i]; i++) { + sysfs_attr_init(&attrs[i]->attr); error = device_create_file(classdev, attrs[i]); if (error) return error; -- cgit v1.2.3 From 421e33d0045ac0aa119c033b78742e0fbf4c3b21 Mon Sep 17 00:00:00 2001 From: Michael Reed Date: Tue, 23 Mar 2010 15:00:58 -0500 Subject: [SCSI] qla1280: retain firmware for error recovery The qla1280 driver acquires its firmware via udev. During boot the firmware is located in the initrd. If, after root is mounted, the adapter needs to reload firmware (host reset), the firmware load may fail if the root device is on the adapter being reset. This patch modifies qla1280 to retain the firmware loaded via the initial request_firmware() for use during error recovery. [jejb: fix up checkpatch issues] Signed-off-by: Michael Reed Acked-by: Jes Sorensen Signed-off-by: James Bottomley --- drivers/scsi/qla1280.c | 161 +++++++++++++++++++++++++++++++++---------------- 1 file changed, 109 insertions(+), 52 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c index 49ac4148493..66e2dd43008 100644 --- a/drivers/scsi/qla1280.c +++ b/drivers/scsi/qla1280.c @@ -17,9 +17,11 @@ * General Public License for more details. * ******************************************************************************/ -#define QLA1280_VERSION "3.27" +#define QLA1280_VERSION "3.27.1" /***************************************************************************** Revision History: + Rev 3.27.1, February 8, 2010, Michael Reed + - Retain firmware image for error recovery. Rev 3.27, February 10, 2009, Michael Reed - General code cleanup. - Improve error recovery. @@ -538,9 +540,9 @@ __setup("qla1280=", qla1280_setup); /*****************************************/ struct qla_boards { - unsigned char name[9]; /* Board ID String */ + char *name; /* Board ID String */ int numPorts; /* Number of SCSI ports */ - char *fwname; /* firmware name */ + int fw_index; /* index into qla1280_fw_tbl for firmware */ }; /* NOTE: the last argument in each entry is used to index ql1280_board_tbl */ @@ -561,15 +563,30 @@ static struct pci_device_id qla1280_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, qla1280_pci_tbl); +DEFINE_MUTEX(qla1280_firmware_mutex); + +struct qla_fw { + char *fwname; + const struct firmware *fw; +}; + +#define QL_NUM_FW_IMAGES 3 + +struct qla_fw qla1280_fw_tbl[QL_NUM_FW_IMAGES] = { + {"qlogic/1040.bin", NULL}, /* image 0 */ + {"qlogic/1280.bin", NULL}, /* image 1 */ + {"qlogic/12160.bin", NULL}, /* image 2 */ +}; + +/* NOTE: Order of boards in this table must match order in qla1280_pci_tbl */ static struct qla_boards ql1280_board_tbl[] = { - /* Name , Number of ports, FW details */ - {"QLA12160", 2, "qlogic/12160.bin"}, - {"QLA1040", 1, "qlogic/1040.bin"}, - {"QLA1080", 1, "qlogic/1280.bin"}, - {"QLA1240", 2, "qlogic/1280.bin"}, - {"QLA1280", 2, "qlogic/1280.bin"}, - {"QLA10160", 1, "qlogic/12160.bin"}, - {" ", 0, " "}, + {.name = "QLA12160", .numPorts = 2, .fw_index = 2}, + {.name = "QLA1040" , .numPorts = 1, .fw_index = 0}, + {.name = "QLA1080" , .numPorts = 1, .fw_index = 1}, + {.name = "QLA1240" , .numPorts = 2, .fw_index = 1}, + {.name = "QLA1280" , .numPorts = 2, .fw_index = 1}, + {.name = "QLA10160", .numPorts = 1, .fw_index = 2}, + {.name = " ", .numPorts = 0, .fw_index = -1}, }; static int qla1280_verbose = 1; @@ -1511,6 +1528,63 @@ qla1280_initialize_adapter(struct scsi_qla_host *ha) return status; } +/* + * qla1280_request_firmware + * Acquire firmware for chip. Retain in memory + * for error recovery. + * + * Input: + * ha = adapter block pointer. + * + * Returns: + * Pointer to firmware image or an error code + * cast to pointer via ERR_PTR(). + */ +static const struct firmware * +qla1280_request_firmware(struct scsi_qla_host *ha) +{ + const struct firmware *fw; + int err; + int index; + char *fwname; + + spin_unlock_irq(ha->host->host_lock); + mutex_lock(&qla1280_firmware_mutex); + + index = ql1280_board_tbl[ha->devnum].fw_index; + fw = qla1280_fw_tbl[index].fw; + if (fw) + goto out; + + fwname = qla1280_fw_tbl[index].fwname; + err = request_firmware(&fw, fwname, &ha->pdev->dev); + + if (err) { + printk(KERN_ERR "Failed to load image \"%s\" err %d\n", + fwname, err); + fw = ERR_PTR(err); + goto unlock; + } + if ((fw->size % 2) || (fw->size < 6)) { + printk(KERN_ERR "Invalid firmware length %zu in image \"%s\"\n", + fw->size, fwname); + release_firmware(fw); + fw = ERR_PTR(-EINVAL); + goto unlock; + } + + qla1280_fw_tbl[index].fw = fw; + + out: + ha->fwver1 = fw->data[0]; + ha->fwver2 = fw->data[1]; + ha->fwver3 = fw->data[2]; + unlock: + mutex_unlock(&qla1280_firmware_mutex); + spin_lock_irq(ha->host->host_lock); + return fw; +} + /* * Chip diagnostics * Test chip for proper operation. @@ -1634,30 +1708,18 @@ qla1280_chip_diag(struct scsi_qla_host *ha) static int qla1280_load_firmware_pio(struct scsi_qla_host *ha) { + /* enter with host_lock acquired */ + const struct firmware *fw; const __le16 *fw_data; uint16_t risc_address, risc_code_size; uint16_t mb[MAILBOX_REGISTER_COUNT], i; - int err; + int err = 0; + + fw = qla1280_request_firmware(ha); + if (IS_ERR(fw)) + return PTR_ERR(fw); - spin_unlock_irq(ha->host->host_lock); - err = request_firmware(&fw, ql1280_board_tbl[ha->devnum].fwname, - &ha->pdev->dev); - spin_lock_irq(ha->host->host_lock); - if (err) { - printk(KERN_ERR "Failed to load image \"%s\" err %d\n", - ql1280_board_tbl[ha->devnum].fwname, err); - return err; - } - if ((fw->size % 2) || (fw->size < 6)) { - printk(KERN_ERR "Bogus length %zu in image \"%s\"\n", - fw->size, ql1280_board_tbl[ha->devnum].fwname); - err = -EINVAL; - goto out; - } - ha->fwver1 = fw->data[0]; - ha->fwver2 = fw->data[1]; - ha->fwver3 = fw->data[2]; fw_data = (const __le16 *)&fw->data[0]; ha->fwstart = __le16_to_cpu(fw_data[2]); @@ -1675,11 +1737,10 @@ qla1280_load_firmware_pio(struct scsi_qla_host *ha) if (err) { printk(KERN_ERR "scsi(%li): Failed to load firmware\n", ha->host_no); - goto out; + break; } } -out: - release_firmware(fw); + return err; } @@ -1687,6 +1748,7 @@ out: static int qla1280_load_firmware_dma(struct scsi_qla_host *ha) { + /* enter with host_lock acquired */ const struct firmware *fw; const __le16 *fw_data; uint16_t risc_address, risc_code_size; @@ -1701,24 +1763,10 @@ qla1280_load_firmware_dma(struct scsi_qla_host *ha) return -ENOMEM; #endif - spin_unlock_irq(ha->host->host_lock); - err = request_firmware(&fw, ql1280_board_tbl[ha->devnum].fwname, - &ha->pdev->dev); - spin_lock_irq(ha->host->host_lock); - if (err) { - printk(KERN_ERR "Failed to load image \"%s\" err %d\n", - ql1280_board_tbl[ha->devnum].fwname, err); - return err; - } - if ((fw->size % 2) || (fw->size < 6)) { - printk(KERN_ERR "Bogus length %zu in image \"%s\"\n", - fw->size, ql1280_board_tbl[ha->devnum].fwname); - err = -EINVAL; - goto out; - } - ha->fwver1 = fw->data[0]; - ha->fwver2 = fw->data[1]; - ha->fwver3 = fw->data[2]; + fw = qla1280_request_firmware(ha); + if (IS_ERR(fw)) + return PTR_ERR(fw); + fw_data = (const __le16 *)&fw->data[0]; ha->fwstart = __le16_to_cpu(fw_data[2]); @@ -1803,7 +1851,6 @@ qla1280_load_firmware_dma(struct scsi_qla_host *ha) #if DUMP_IT_BACK pci_free_consistent(ha->pdev, 8000, tbuf, p_tbuf); #endif - release_firmware(fw); return err; } @@ -1842,6 +1889,7 @@ qla1280_start_firmware(struct scsi_qla_host *ha) static int qla1280_load_firmware(struct scsi_qla_host *ha) { + /* enter with host_lock taken */ int err; err = qla1280_chip_diag(ha); @@ -4420,7 +4468,16 @@ qla1280_init(void) static void __exit qla1280_exit(void) { + int i; + pci_unregister_driver(&qla1280_pci_driver); + /* release any allocated firmware images */ + for (i = 0; i < QL_NUM_FW_IMAGES; i++) { + if (qla1280_fw_tbl[i].fw) { + release_firmware(qla1280_fw_tbl[i].fw); + qla1280_fw_tbl[i].fw = NULL; + } + } } module_init(qla1280_init); -- cgit v1.2.3