From 84e2d34004dcd0c90d1af43a143511b334f11a4d Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Tue, 29 Jul 2008 08:38:55 +0200 Subject: pcmcia: use pcmcia_loop_config in misc pcmcia drivers Use the config loop helper in misc pcmcia drivers. CC: Harald Welte CC: CC: Russell King CC: Ed Okerson CC: linux-serial@vger.kernel.org CC: boti@rocketmail.com CC: linux-usb@vger.kernel.org Signed-off-by: Dominik Brodowski --- drivers/char/pcmcia/cm4000_cs.c | 73 ++++------- drivers/char/pcmcia/cm4040_cs.c | 76 +++++------- drivers/parport/parport_cs.c | 73 ++++++----- drivers/serial/serial_cs.c | 262 ++++++++++++++++------------------------ drivers/telephony/ixj_pcmcia.c | 76 ++++++------ drivers/usb/host/sl811_cs.c | 140 +++++++++++---------- 6 files changed, 299 insertions(+), 401 deletions(-) (limited to 'drivers') diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c index f070ae7bd91..47adec480bd 100644 --- a/drivers/char/pcmcia/cm4000_cs.c +++ b/drivers/char/pcmcia/cm4000_cs.c @@ -1759,65 +1759,40 @@ static void cmm_cm4000_release(struct pcmcia_device * link) /*==== Interface to PCMCIA Layer =======================================*/ +static int cm4000_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + void *priv_data) +{ + p_dev->conf.ConfigIndex = cfg->index; + + if (!cfg->io.nwin) + return -ENODEV; + + /* Get the IOaddr */ + p_dev->io.BasePort1 = cfg->io.win[0].base; + p_dev->io.NumPorts1 = cfg->io.win[0].len; + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + if (!(cfg->io.flags & CISTPL_IO_8BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + if (!(cfg->io.flags & CISTPL_IO_16BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK; + + return pcmcia_request_io(p_dev, &p_dev->io); +} + static int cm4000_config(struct pcmcia_device * link, int devno) { struct cm4000_dev *dev; - tuple_t tuple; - cisparse_t parse; - u_char buf[64]; - int fail_fn, fail_rc; - int rc; /* read the config-tuples */ - tuple.Attributes = 0; - tuple.TupleData = buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; - - link->io.BasePort2 = 0; - link->io.NumPorts2 = 0; - link->io.Attributes2 = 0; - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - for (rc = pcmcia_get_first_tuple(link, &tuple); - rc == CS_SUCCESS; rc = pcmcia_get_next_tuple(link, &tuple)) { - - rc = pcmcia_get_tuple_data(link, &tuple); - if (rc != CS_SUCCESS) - continue; - rc = pcmcia_parse_tuple(link, &tuple, &parse); - if (rc != CS_SUCCESS) - continue; - - link->conf.ConfigIndex = parse.cftable_entry.index; - - if (!parse.cftable_entry.io.nwin) - continue; - - /* Get the IOaddr */ - link->io.BasePort1 = parse.cftable_entry.io.win[0].base; - link->io.NumPorts1 = parse.cftable_entry.io.win[0].len; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(parse.cftable_entry.io.flags & CISTPL_IO_8BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(parse.cftable_entry.io.flags & CISTPL_IO_16BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.IOAddrLines = parse.cftable_entry.io.flags - & CISTPL_IO_LINES_MASK; - - rc = pcmcia_request_io(link, &link->io); - if (rc == CS_SUCCESS) - break; /* we are done */ - } - if (rc != CS_SUCCESS) + if (pcmcia_loop_config(link, cm4000_config_check, NULL)) goto cs_release; link->conf.IntType = 00000002; - if ((fail_rc = - pcmcia_request_configuration(link, &link->conf)) != CS_SUCCESS) { - fail_fn = RequestConfiguration; + if (pcmcia_request_configuration(link, &link->conf)) goto cs_release; - } dev = link->priv; sprintf(dev->node.dev_name, DEVICE_NAME "%d", devno); diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c index 0b5934bef7a..e0f5d8c9b26 100644 --- a/drivers/char/pcmcia/cm4040_cs.c +++ b/drivers/char/pcmcia/cm4040_cs.c @@ -526,65 +526,49 @@ static void cm4040_reader_release(struct pcmcia_device *link) return; } -static int reader_config(struct pcmcia_device *link, int devno) +static int cm4040_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + void *priv_data) { - struct reader_dev *dev; - tuple_t tuple; - cisparse_t parse; - u_char buf[64]; - int fail_fn, fail_rc; int rc; + p_dev->conf.ConfigIndex = cfg->index; + + if (!cfg->io.nwin) + return -ENODEV; - tuple.Attributes = 0; - tuple.TupleData = buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; + /* Get the IOaddr */ + p_dev->io.BasePort1 = cfg->io.win[0].base; + p_dev->io.NumPorts1 = cfg->io.win[0].len; + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + if (!(cfg->io.flags & CISTPL_IO_8BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + if (!(cfg->io.flags & CISTPL_IO_16BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK; + + rc = pcmcia_request_io(p_dev, &p_dev->io); + dev_printk(KERN_INFO, &handle_to_dev(p_dev), + "pcmcia_request_io returned 0x%x\n", rc); + return rc; +} + + +static int reader_config(struct pcmcia_device *link, int devno) +{ + struct reader_dev *dev; + int fail_rc; link->io.BasePort2 = 0; link->io.NumPorts2 = 0; link->io.Attributes2 = 0; - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - for (rc = pcmcia_get_first_tuple(link, &tuple); - rc == CS_SUCCESS; - rc = pcmcia_get_next_tuple(link, &tuple)) { - rc = pcmcia_get_tuple_data(link, &tuple); - if (rc != CS_SUCCESS) - continue; - rc = pcmcia_parse_tuple(link, &tuple, &parse); - if (rc != CS_SUCCESS) - continue; - - link->conf.ConfigIndex = parse.cftable_entry.index; - - if (!parse.cftable_entry.io.nwin) - continue; - - link->io.BasePort1 = parse.cftable_entry.io.win[0].base; - link->io.NumPorts1 = parse.cftable_entry.io.win[0].len; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(parse.cftable_entry.io.flags & CISTPL_IO_8BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(parse.cftable_entry.io.flags & CISTPL_IO_16BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.IOAddrLines = parse.cftable_entry.io.flags - & CISTPL_IO_LINES_MASK; - rc = pcmcia_request_io(link, &link->io); - - dev_printk(KERN_INFO, &handle_to_dev(link), "foo"); - if (rc == CS_SUCCESS) - break; - else - dev_printk(KERN_INFO, &handle_to_dev(link), - "pcmcia_request_io failed 0x%x\n", rc); - } - if (rc != CS_SUCCESS) + + if (pcmcia_loop_config(link, cm4040_config_check, NULL)) goto cs_release; link->conf.IntType = 00000002; if ((fail_rc = pcmcia_request_configuration(link,&link->conf)) !=CS_SUCCESS) { - fail_fn = RequestConfiguration; dev_printk(KERN_INFO, &handle_to_dev(link), "pcmcia_request_configuration failed 0x%x\n", fail_rc); diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c index 00e1d9620f7..636231739f4 100644 --- a/drivers/parport/parport_cs.c +++ b/drivers/parport/parport_cs.c @@ -149,52 +149,49 @@ static void parport_detach(struct pcmcia_device *link) #define CS_CHECK(fn, ret) \ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) +static int parport_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + void *priv_data) +{ + cistpl_cftable_entry_t *dflt = priv_data; + if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + p_dev->conf.ConfigIndex = cfg->index; + if (epp_mode) + p_dev->conf.ConfigIndex |= FORCE_EPP_MODE; + p_dev->io.BasePort1 = io->win[0].base; + p_dev->io.NumPorts1 = io->win[0].len; + p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + if (io->nwin == 2) { + p_dev->io.BasePort2 = io->win[1].base; + p_dev->io.NumPorts2 = io->win[1].len; + } + if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + goto next_entry; + return 0; + } + +next_entry: + if (cfg->flags & CISTPL_CFTABLE_DEFAULT) + *dflt = *cfg; + return -ENODEV; +} + static int parport_config(struct pcmcia_device *link) { parport_info_t *info = link->priv; - tuple_t tuple; - u_short buf[128]; - cisparse_t parse; - cistpl_cftable_entry_t *cfg = &parse.cftable_entry; cistpl_cftable_entry_t dflt = { 0 }; struct parport *p; int last_ret, last_fn; - + DEBUG(0, "parport_config(0x%p)\n", link); - - tuple.TupleData = (cisdata_t *)buf; - tuple.TupleOffset = 0; tuple.TupleDataMax = 255; - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - tuple.Attributes = 0; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - while (1) { - if (pcmcia_get_tuple_data(link, &tuple) != 0 || - pcmcia_parse_tuple(link, &tuple, &parse) != 0) - goto next_entry; - - if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io; - link->conf.ConfigIndex = cfg->index; - if (epp_mode) - link->conf.ConfigIndex |= FORCE_EPP_MODE; - link->io.BasePort1 = io->win[0].base; - link->io.NumPorts1 = io->win[0].len; - link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - if (io->nwin == 2) { - link->io.BasePort2 = io->win[1].base; - link->io.NumPorts2 = io->win[1].len; - } - if (pcmcia_request_io(link, &link->io) != 0) - goto next_entry; - /* If we've got this far, we're done */ - break; - } - - next_entry: - if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg; - CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple)); + + last_ret = pcmcia_loop_config(link, parport_config_check, &dflt); + if (last_ret) { + cs_error(link, RequestIO, last_ret); + goto failed; } - + CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index 164d2a42eb5..ac60cd28841 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -439,43 +439,55 @@ first_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse) return pcmcia_parse_tuple(handle, tuple, parse); } -static int -next_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse) +/*====================================================================*/ + +static int simple_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cf, + void *priv_data) { - int i; - i = pcmcia_get_next_tuple(handle, tuple); - if (i != CS_SUCCESS) - return CS_NO_MORE_ITEMS; - i = pcmcia_get_tuple_data(handle, tuple); - if (i != CS_SUCCESS) - return i; - return pcmcia_parse_tuple(handle, tuple, parse); + static const int size_table[2] = { 8, 16 }; + int *try = priv_data; + + if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) + p_dev->conf.Vpp = + cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; + + if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[(*try >> 1)]) + && (cf->io.win[0].base != 0)) { + p_dev->conf.ConfigIndex = cf->index; + p_dev->io.BasePort1 = cf->io.win[0].base; + p_dev->io.IOAddrLines = ((*try & 0x1) == 0) ? + 16 : cf->io.flags & CISTPL_IO_LINES_MASK; + if (!pcmcia_request_io(p_dev, &p_dev->io)) + return 0; + } + return -EINVAL; } -/*====================================================================*/ +static int simple_config_check_notpicky(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cf, + void *priv_data) +{ + static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; + int j; + + if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { + p_dev->conf.ConfigIndex = cf->index; + for (j = 0; j < 5; j++) { + p_dev->io.BasePort1 = base[j]; + p_dev->io.IOAddrLines = base[j] ? 16 : 3; + if (!pcmcia_request_io(p_dev, &p_dev->io)) + return 0; + } + } + return -ENODEV; +} static int simple_config(struct pcmcia_device *link) { - static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; - static const int size_table[2] = { 8, 16 }; struct serial_info *info = link->priv; - struct serial_cfg_mem *cfg_mem; - tuple_t *tuple; - u_char *buf; - cisparse_t *parse; - cistpl_cftable_entry_t *cf; config_info_t config; - int i, j, try; - int s; - - cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL); - if (!cfg_mem) - return -1; - - tuple = &cfg_mem->tuple; - parse = &cfg_mem->parse; - cf = &parse->cftable_entry; - buf = cfg_mem->buf; + int i, try; /* If the card is already configured, look up the port and irq */ i = pcmcia_get_configuration_info(link, &config); @@ -490,70 +502,28 @@ static int simple_config(struct pcmcia_device *link) info->slave = 1; } if (info->slave) { - kfree(cfg_mem); return setup_serial(link, info, port, config.AssignedIRQ); } } - /* First pass: look for a config entry that looks normal. */ - tuple->TupleData = (cisdata_t *) buf; - tuple->TupleOffset = 0; - tuple->TupleDataMax = 255; - tuple->Attributes = 0; - tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY; - /* Two tries: without IO aliases, then with aliases */ - for (s = 0; s < 2; s++) { - for (try = 0; try < 2; try++) { - i = first_tuple(link, tuple, parse); - while (i != CS_NO_MORE_ITEMS) { - if (i != CS_SUCCESS) - goto next_entry; - if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) - link->conf.Vpp = - cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; - if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[s]) && - (cf->io.win[0].base != 0)) { - link->conf.ConfigIndex = cf->index; - link->io.BasePort1 = cf->io.win[0].base; - link->io.IOAddrLines = (try == 0) ? - 16 : cf->io.flags & CISTPL_IO_LINES_MASK; - i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) - goto found_port; - } -next_entry: - i = next_tuple(link, tuple, parse); - } - } - } + /* First pass: look for a config entry that looks normal. + * Two tries: without IO aliases, then with aliases */ + for (try = 0; try < 4; try++) + if (!pcmcia_loop_config(link, simple_config_check, &try)) + goto found_port; + /* Second pass: try to find an entry that isn't picky about its base address, then try to grab any standard serial port address, and finally try to get any free port. */ - i = first_tuple(link, tuple, parse); - while (i != CS_NO_MORE_ITEMS) { - if ((i == CS_SUCCESS) && (cf->io.nwin > 0) && - ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { - link->conf.ConfigIndex = cf->index; - for (j = 0; j < 5; j++) { - link->io.BasePort1 = base[j]; - link->io.IOAddrLines = base[j] ? 16 : 3; - i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) - goto found_port; - } - } - i = next_tuple(link, tuple, parse); - } + if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL)) + goto found_port; - found_port: - if (i != CS_SUCCESS) { - printk(KERN_NOTICE - "serial_cs: no usable port range found, giving up\n"); - cs_error(link, RequestIO, i); - kfree(cfg_mem); - return -1; - } + printk(KERN_NOTICE + "serial_cs: no usable port range found, giving up\n"); + cs_error(link, RequestIO, i); + return -1; +found_port: i = pcmcia_request_irq(link, &link->irq); if (i != CS_SUCCESS) { cs_error(link, RequestIRQ, i); @@ -571,86 +541,72 @@ next_entry: i = pcmcia_request_configuration(link, &link->conf); if (i != CS_SUCCESS) { cs_error(link, RequestConfiguration, i); - kfree(cfg_mem); return -1; } - kfree(cfg_mem); return setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ); } -static int multi_config(struct pcmcia_device * link) +static int multi_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cf, + void *priv_data) { - struct serial_info *info = link->priv; - struct serial_cfg_mem *cfg_mem; - tuple_t *tuple; - u_char *buf; - cisparse_t *parse; - cistpl_cftable_entry_t *cf; - int i, rc, base2 = 0; + int *base2 = priv_data; + + /* The quad port cards have bad CIS's, so just look for a + window larger than 8 ports and assume it will be right */ + if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) { + p_dev->conf.ConfigIndex = cf->index; + p_dev->io.BasePort1 = cf->io.win[0].base; + p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK; + if (!pcmcia_request_io(p_dev, &p_dev->io)) { + *base2 = p_dev->io.BasePort1 + 8; + return 0; + } + } + return -ENODEV; +} - cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL); - if (!cfg_mem) - return -1; - tuple = &cfg_mem->tuple; - parse = &cfg_mem->parse; - cf = &parse->cftable_entry; - buf = cfg_mem->buf; +static int multi_config_check_notpicky(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cf, + void *priv_data) +{ + int *base2 = priv_data; + + if (cf->io.nwin == 2) { + p_dev->conf.ConfigIndex = cf->index; + p_dev->io.BasePort1 = cf->io.win[0].base; + p_dev->io.BasePort2 = cf->io.win[1].base; + p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK; + if (!pcmcia_request_io(p_dev, &p_dev->io)) { + *base2 = p_dev->io.BasePort2; + return 0; + } + } + return -ENODEV; +} - tuple->TupleData = (cisdata_t *) buf; - tuple->TupleOffset = 0; - tuple->TupleDataMax = 255; - tuple->Attributes = 0; - tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY; +static int multi_config(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + int i, base2 = 0; /* First, look for a generic full-sized window */ link->io.NumPorts1 = info->multi * 8; - i = first_tuple(link, tuple, parse); - while (i != CS_NO_MORE_ITEMS) { - /* The quad port cards have bad CIS's, so just look for a - window larger than 8 ports and assume it will be right */ - if ((i == CS_SUCCESS) && (cf->io.nwin == 1) && - (cf->io.win[0].len > 8)) { - link->conf.ConfigIndex = cf->index; - link->io.BasePort1 = cf->io.win[0].base; - link->io.IOAddrLines = - cf->io.flags & CISTPL_IO_LINES_MASK; - i = pcmcia_request_io(link, &link->io); - base2 = link->io.BasePort1 + 8; - if (i == CS_SUCCESS) - break; - } - i = next_tuple(link, tuple, parse); - } - - /* If that didn't work, look for two windows */ - if (i != CS_SUCCESS) { + if (pcmcia_loop_config(link, multi_config_check, &base2)) { + /* If that didn't work, look for two windows */ link->io.NumPorts1 = link->io.NumPorts2 = 8; info->multi = 2; - i = first_tuple(link, tuple, parse); - while (i != CS_NO_MORE_ITEMS) { - if ((i == CS_SUCCESS) && (cf->io.nwin == 2)) { - link->conf.ConfigIndex = cf->index; - link->io.BasePort1 = cf->io.win[0].base; - link->io.BasePort2 = cf->io.win[1].base; - link->io.IOAddrLines = - cf->io.flags & CISTPL_IO_LINES_MASK; - i = pcmcia_request_io(link, &link->io); - base2 = link->io.BasePort2; - if (i == CS_SUCCESS) - break; - } - i = next_tuple(link, tuple, parse); + if (pcmcia_loop_config(link, multi_config_check_notpicky, + &base2)) { + printk(KERN_NOTICE "serial_cs: no usable port range" + "found, giving up\n"); + return -ENODEV; } } - if (i != CS_SUCCESS) { - cs_error(link, RequestIO, i); - rc = -1; - goto free_cfg_mem; - } - i = pcmcia_request_irq(link, &link->irq); if (i != CS_SUCCESS) { + /* FIXME: comment does not fit, error handling does not fit */ printk(KERN_NOTICE "serial_cs: no usable port range found, giving up\n"); cs_error(link, RequestIRQ, i); @@ -666,8 +622,7 @@ static int multi_config(struct pcmcia_device * link) i = pcmcia_request_configuration(link, &link->conf); if (i != CS_SUCCESS) { cs_error(link, RequestConfiguration, i); - rc = -1; - goto free_cfg_mem; + return -ENODEV; } /* The Oxford Semiconductor OXCF950 cards are in fact single-port: @@ -678,7 +633,8 @@ static int multi_config(struct pcmcia_device * link) info->prodid == PRODID_POSSIO_GCC)) { int err; - if (cf->index == 1 || cf->index == 3) { + if (link->conf.ConfigIndex == 1 || + link->conf.ConfigIndex == 3) { err = setup_serial(link, info, base2, link->irq.AssignedIRQ); base2 = link->io.BasePort1; @@ -695,18 +651,14 @@ static int multi_config(struct pcmcia_device * link) if (info->quirk && info->quirk->wakeup) info->quirk->wakeup(link); - rc = 0; - goto free_cfg_mem; + return 0; } setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ); for (i = 0; i < info->multi - 1; i++) setup_serial(link, info, base2 + (8 * i), link->irq.AssignedIRQ); - rc = 0; -free_cfg_mem: - kfree(cfg_mem); - return rc; + return 0; } /*====================================================================== diff --git a/drivers/telephony/ixj_pcmcia.c b/drivers/telephony/ixj_pcmcia.c index ff9a29b7633..89c5e40ce3a 100644 --- a/drivers/telephony/ixj_pcmcia.c +++ b/drivers/telephony/ixj_pcmcia.c @@ -124,65 +124,57 @@ static void ixj_get_serial(struct pcmcia_device * link, IXJ * j) return; } +static int ixj_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + void *priv_data) +{ + cistpl_cftable_entry_t *dflt = priv_data; + + if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + p_dev->conf.ConfigIndex = cfg->index; + p_dev->io.BasePort1 = io->win[0].base; + p_dev->io.NumPorts1 = io->win[0].len; + if (io->nwin == 2) { + p_dev->io.BasePort2 = io->win[1].base; + p_dev->io.NumPorts2 = io->win[1].len; + } + if (pcmcia_request_io(p_dev, &p_dev->io)) { + if (cfg->flags & CISTPL_CFTABLE_DEFAULT) + *dflt = *cfg; + } else + return 0; + } + return -ENODEV; +} + static int ixj_config(struct pcmcia_device * link) { IXJ *j; ixj_info_t *info; - tuple_t tuple; - u_short buf[128]; - cisparse_t parse; - cistpl_cftable_entry_t *cfg = &parse.cftable_entry; - cistpl_cftable_entry_t dflt = - { - 0 - }; - int last_ret, last_fn; + cistpl_cftable_entry_t dflt = { 0 }; + info = link->priv; DEBUG(0, "ixj_config(0x%p)\n", link); - tuple.TupleData = (cisdata_t *) buf; - tuple.TupleOffset = 0; - tuple.TupleDataMax = 255; - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - tuple.Attributes = 0; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - while (1) { - if (pcmcia_get_tuple_data(link, &tuple) != 0 || - pcmcia_parse_tuple(link, &tuple, &parse) != 0) - goto next_entry; - if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io; - link->conf.ConfigIndex = cfg->index; - link->io.BasePort1 = io->win[0].base; - link->io.NumPorts1 = io->win[0].len; - if (io->nwin == 2) { - link->io.BasePort2 = io->win[1].base; - link->io.NumPorts2 = io->win[1].len; - } - if (pcmcia_request_io(link, &link->io) != 0) - goto next_entry; - /* If we've got this far, we're done */ - break; - } - next_entry: - if (cfg->flags & CISTPL_CFTABLE_DEFAULT) - dflt = *cfg; - CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple)); - } - CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); + if (pcmcia_loop_config(link, ixj_config_check, &dflt)) + goto cs_failed; + + if (pcmcia_request_configuration(link, &link->conf)) + goto cs_failed; /* * Register the card with the core. - */ - j=ixj_pcmcia_probe(link->io.BasePort1,link->io.BasePort1 + 0x10); + */ + j = ixj_pcmcia_probe(link->io.BasePort1, link->io.BasePort1 + 0x10); info->ndev = 1; info->node.major = PHONE_MAJOR; link->dev_node = &info->node; ixj_get_serial(link, j); return 0; + cs_failed: - cs_error(link, last_fn, last_ret); ixj_cs_release(link); return -ENODEV; } diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c index 5da63f53500..9773601bf0b 100644 --- a/drivers/usb/host/sl811_cs.c +++ b/drivers/usb/host/sl811_cs.c @@ -155,88 +155,84 @@ static void sl811_cs_release(struct pcmcia_device * link) platform_device_unregister(&platform_dev); } +struct sl811_css_cfg { + cistpl_cftable_entry_t dflt; + config_info_t conf; +}; + +static int sl811_cs_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + void *priv_data) +{ + struct sl811_css_cfg *cfg_mem = priv_data; + + if (cfg->flags & CISTPL_CFTABLE_DEFAULT) + memcpy(&cfg_mem->dflt, cfg, sizeof(cistpl_cftable_entry_t)); + + if (cfg->index == 0) + return -ENODEV; + + p_dev->conf.ConfigIndex = cfg->index; + + /* Use power settings for Vcc and Vpp if present */ + /* Note that the CIS values need to be rescaled */ + if (cfg->vcc.present & (1<vcc.param[CISTPL_POWER_VNOM]/10000 != + cfg_mem->conf.Vcc) + return -ENODEV; + } else if (cfg_mem->dflt.vcc.present & (1<dflt.vcc.param[CISTPL_POWER_VNOM]/10000 + != cfg_mem->conf.Vcc) + return -ENODEV; + } + + if (cfg->vpp1.present & (1<conf.Vpp = + cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; + else if (cfg_mem->dflt.vpp1.present & (1<conf.Vpp = + cfg_mem->dflt.vpp1.param[CISTPL_POWER_VNOM]/10000; + + /* we need an interrupt */ + if (cfg->irq.IRQInfo1 || cfg_mem->dflt.irq.IRQInfo1) + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + + /* IO window settings */ + p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + if ((cfg->io.nwin > 0) || (cfg_mem->dflt.io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &cfg_mem->dflt.io; + + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->io.BasePort1 = io->win[0].base; + p_dev->io.NumPorts1 = io->win[0].len; + + return pcmcia_request_io(p_dev, &p_dev->io); + } + pcmcia_disable_device(p_dev); + return -ENODEV; +} + + static int sl811_cs_config(struct pcmcia_device *link) { struct device *parent = &handle_to_dev(link); local_info_t *dev = link->priv; - tuple_t tuple; - cisparse_t parse; int last_fn, last_ret; - u_char buf[64]; - config_info_t conf; - cistpl_cftable_entry_t dflt = { 0 }; + struct sl811_css_cfg *cfg_mem; DBG(0, "sl811_cs_config(0x%p)\n", link); + cfg_mem = kzalloc(sizeof(struct sl811_css_cfg), GFP_KERNEL); + if (!cfg_mem) + return -ENOMEM; + /* Look up the current Vcc */ CS_CHECK(GetConfigurationInfo, - pcmcia_get_configuration_info(link, &conf)); - - tuple.Attributes = 0; - tuple.TupleData = buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - while (1) { - cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); - - if (pcmcia_get_tuple_data(link, &tuple) != 0 - || pcmcia_parse_tuple(link, &tuple, &parse) - != 0) - goto next_entry; - - if (cfg->flags & CISTPL_CFTABLE_DEFAULT) { - dflt = *cfg; - } + pcmcia_get_configuration_info(link, &cfg_mem->conf)); - if (cfg->index == 0) - goto next_entry; - - link->conf.ConfigIndex = cfg->index; - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1<vcc.param[CISTPL_POWER_VNOM]/10000 - != conf.Vcc) - goto next_entry; - } else if (dflt.vcc.present & (1<vpp1.present & (1<conf.Vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; - else if (dflt.vpp1.present & (1<conf.Vpp = - dflt.vpp1.param[CISTPL_POWER_VNOM]/10000; - - /* we need an interrupt */ - if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) - link->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - link->io.NumPorts1 = link->io.NumPorts2 = 0; - if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io; - - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - link->io.BasePort1 = io->win[0].base; - link->io.NumPorts1 = io->win[0].len; - - if (pcmcia_request_io(link, &link->io) != 0) - goto next_entry; - } - break; - -next_entry: - pcmcia_disable_device(link); - last_ret = pcmcia_get_next_tuple(link, &tuple); - } + if (pcmcia_loop_config(link, sl811_cs_config_check, cfg_mem)) + return -ENODEV; /* require an IRQ and two registers */ if (!link->io.NumPorts1 || link->io.NumPorts1 < 2) @@ -269,8 +265,10 @@ cs_failed: printk("sl811_cs_config failed\n"); cs_error(link, last_fn, last_ret); sl811_cs_release(link); + kfree(cfg_mem); return -ENODEV; } + kfree(cfg_mem); return 0; } -- cgit v1.2.3