From 88dacbe961aa63fa880b4f6f16515427f61fc3ca Mon Sep 17 00:00:00 2001 From: Willy Tarreau Date: Sat, 17 Feb 2007 18:57:09 +0100 Subject: rio: typo in bitwise AND expression. The line : hp->Mode &= !RIO_PCI_INT_ENABLE; is obviously wrong as RIO_PCI_INT_ENABLE=0x04 and is used as a bitmask 2 lines before. Getting no IRQ would not disable RIO_PCI_INT_ENABLE but rather RIO_PCI_BOOT_FROM_RAM which equals 0x01. Obvious fix is to change ! for ~. Signed-off-by: Willy Tarreau Signed-off-by: Adrian Bunk --- drivers/char/rio/rio_linux.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/rio/rio_linux.c b/drivers/char/rio/rio_linux.c index 85c16184526..294e9cb0c44 100644 --- a/drivers/char/rio/rio_linux.c +++ b/drivers/char/rio/rio_linux.c @@ -1146,7 +1146,7 @@ static int __init rio_init(void) rio_dprintk(RIO_DEBUG_INIT, "Enabling interrupts on rio card.\n"); hp->Mode |= RIO_PCI_INT_ENABLE; } else - hp->Mode &= !RIO_PCI_INT_ENABLE; + hp->Mode &= ~RIO_PCI_INT_ENABLE; rio_dprintk(RIO_DEBUG_INIT, "New Mode: %x\n", hp->Mode); rio_start_card_running(hp); } -- cgit v1.2.3 From d08df601a30df9e36c29f3214315f4f0c8784c68 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Sat, 17 Feb 2007 19:07:33 +0100 Subject: Various typo fixes. Correct mis-spellings of "algorithm", "appear", "consistent" and (shame, shame) "kernel". Signed-off-by: Robert P. J. Day Signed-off-by: Adrian Bunk --- drivers/infiniband/hw/ipath/ipath_iba6110.c | 2 +- drivers/infiniband/hw/ipath/ipath_iba6120.c | 2 +- drivers/isdn/i4l/isdn_ppp.c | 2 +- drivers/net/e1000/e1000_hw.h | 2 +- drivers/net/wireless/wavelan_cs.c | 8 ++++---- drivers/sbus/char/vfc_i2c.c | 2 +- 6 files changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c index 7468477ba83..99348254502 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6110.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c @@ -1534,7 +1534,7 @@ static int ipath_ht_early_init(struct ipath_devdata *dd) * @kbase: ipath_base_info pointer * * We set the PCIE flag because the lower bandwidth on PCIe vs - * HyperTransport can affect some user packet algorithims. + * HyperTransport can affect some user packet algorithms. */ static int ipath_ht_get_base_info(struct ipath_portdata *pd, void *kbase) { diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c index ae8bf9950c6..05918e1e7c3 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6120.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c @@ -1293,7 +1293,7 @@ int __attribute__((weak)) ipath_unordered_wc(void) * @kbase: ipath_base_info pointer * * We set the PCIE flag because the lower bandwidth on PCIe vs - * HyperTransport can affect some user packet algorithims. + * HyperTransport can affect some user packet algorithms. */ static int ipath_pe_get_base_info(struct ipath_portdata *pd, void *kbase) { diff --git a/drivers/isdn/i4l/isdn_ppp.c b/drivers/isdn/i4l/isdn_ppp.c index 4e3f127e400..1b2df80c3bc 100644 --- a/drivers/isdn/i4l/isdn_ppp.c +++ b/drivers/isdn/i4l/isdn_ppp.c @@ -1680,7 +1680,7 @@ static void isdn_ppp_mp_receive(isdn_net_dev * net_dev, isdn_net_local * lp, * - we hit a gap in the sequence, so no reassembly/processing is * possible ('start' would be set to NULL) * - * algorightm for this code is derived from code in the book + * algorithm for this code is derived from code in the book * 'PPP Design And Debugging' by James Carlson (Addison-Wesley) */ while (start != NULL || newfrag != NULL) { diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index d6710588334..bd000b802ee 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -3253,7 +3253,7 @@ struct e1000_host_command_info { #define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable MDI/MDI-X feature, default 0=disabled */ #define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDIX-X, 0=force MDI */ #define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */ -#define IFE_PMC_AUTO_MDIX_COMPLETE 0x0010 /* Resolution algorthm is completed */ +#define IFE_PMC_AUTO_MDIX_COMPLETE 0x0010 /* Resolution algorithm is completed */ #define IFE_PMC_MDIX_MODE_SHIFT 6 #define IFE_PHC_MDIX_RESET_ALL_MASK 0x0000 /* Disable auto MDI-X */ diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c index 5eb81638e84..b04239792f6 100644 --- a/drivers/net/wireless/wavelan_cs.c +++ b/drivers/net/wireless/wavelan_cs.c @@ -1168,7 +1168,7 @@ wv_mmc_show(struct net_device * dev) m.mmr_unused0[6], m.mmr_unused0[7]); #endif /* DEBUG_SHOW_UNUSED */ - printk(KERN_DEBUG "Encryption algorythm: %02X - Status: %02X\n", + printk(KERN_DEBUG "Encryption algorithm: %02X - Status: %02X\n", m.mmr_des_avail, m.mmr_des_status); #ifdef DEBUG_SHOW_UNUSED printk(KERN_DEBUG "mmc_unused1[]: %02X:%02X:%02X:%02X:%02X\n", @@ -3590,9 +3590,9 @@ wv_82593_config(struct net_device * dev) cfblk.acloc = TRUE; /* Disable source addr insertion by i82593 */ cfblk.preamb_len = 0; /* 2 bytes preamble (SFD) */ cfblk.loopback = FALSE; - cfblk.lin_prio = 0; /* conform to 802.3 backoff algoritm */ - cfblk.exp_prio = 5; /* conform to 802.3 backoff algoritm */ - cfblk.bof_met = 1; /* conform to 802.3 backoff algoritm */ + cfblk.lin_prio = 0; /* conform to 802.3 backoff algorithm */ + cfblk.exp_prio = 5; /* conform to 802.3 backoff algorithm */ + cfblk.bof_met = 1; /* conform to 802.3 backoff algorithm */ cfblk.ifrm_spc = 0x20 >> 4; /* 32 bit times interframe spacing */ cfblk.slottim_low = 0x20 >> 5; /* 32 bit times slot time */ cfblk.slottim_hi = 0x0; diff --git a/drivers/sbus/char/vfc_i2c.c b/drivers/sbus/char/vfc_i2c.c index ceec30648f4..9efed771f6c 100644 --- a/drivers/sbus/char/vfc_i2c.c +++ b/drivers/sbus/char/vfc_i2c.c @@ -14,7 +14,7 @@ /* NOTE: It seems to me that the documentation regarding the pcd8584t/pcf8584 does not show the correct way to address the i2c bus. Based on the information on the I2C bus itself and the remainder of -the Phillips docs the following algorithims apper to be correct. I am +the Phillips docs the following algorithms appear to be correct. I am fairly certain that the flowcharts in the phillips docs are wrong. */ -- cgit v1.2.3 From 405ae7d381302468ecc803f2148a2ae40a04c999 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Sat, 17 Feb 2007 19:13:42 +0100 Subject: Replace remaining references to "driverfs" with "sysfs". Globally, s/driverfs/sysfs/g. Signed-off-by: Robert P. J. Day Signed-off-by: Adrian Bunk --- drivers/base/cpu.c | 2 +- drivers/base/node.c | 2 +- drivers/i2c/busses/i2c-ali1535.c | 2 +- drivers/i2c/busses/i2c-ali15x3.c | 2 +- drivers/i2c/busses/i2c-amd756.c | 2 +- drivers/i2c/busses/i2c-amd8111.c | 2 +- drivers/i2c/busses/i2c-i801.c | 2 +- drivers/i2c/busses/i2c-piix4.c | 2 +- drivers/i2c/busses/i2c-sis5595.c | 2 +- drivers/i2c/busses/i2c-sis630.c | 2 +- drivers/i2c/busses/i2c-sis96x.c | 2 +- drivers/i2c/busses/i2c-via.c | 2 +- drivers/scsi/osst.c | 12 ++++++------ drivers/scsi/scsi_scan.c | 2 +- drivers/scsi/st.c | 38 +++++++++++++++++++------------------- drivers/usb/host/ehci-dbg.c | 2 +- 16 files changed, 39 insertions(+), 39 deletions(-) (limited to 'drivers') diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c index 7fd095efaeb..fe7ef339414 100644 --- a/drivers/base/cpu.c +++ b/drivers/base/cpu.c @@ -103,7 +103,7 @@ static SYSDEV_ATTR(crash_notes, 0400, show_crash_notes, NULL); #endif /* - * register_cpu - Setup a driverfs device for a CPU. + * register_cpu - Setup a sysfs device for a CPU. * @cpu - cpu->hotpluggable field set to 1 will generate a control file in * sysfs for this CPU. * @num - CPU number to use when creating the device. diff --git a/drivers/base/node.c b/drivers/base/node.c index 475e33f76e0..cae346ef1b2 100644 --- a/drivers/base/node.c +++ b/drivers/base/node.c @@ -133,7 +133,7 @@ static SYSDEV_ATTR(distance, S_IRUGO, node_read_distance, NULL); /* - * register_node - Setup a driverfs device for a node. + * register_node - Setup a sysfs device for a node. * @num - Node number to use when creating the device. * * Initialize and register the node device. diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index 6fd8ad7faa0..1e277ba5a9f 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -494,7 +494,7 @@ static int __devinit ali1535_probe(struct pci_dev *dev, const struct pci_device_ return -ENODEV; } - /* set up the driverfs linkage to our parent device */ + /* set up the sysfs linkage to our parent device */ ali1535_adapter.dev.parent = &dev->dev; snprintf(ali1535_adapter.name, I2C_NAME_SIZE, diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index e4e0df10681..e47fe01bf42 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -489,7 +489,7 @@ static int __devinit ali15x3_probe(struct pci_dev *dev, const struct pci_device_ return -ENODEV; } - /* set up the driverfs linkage to our parent device */ + /* set up the sysfs linkage to our parent device */ ali15x3_adapter.dev.parent = &dev->dev; snprintf(ali15x3_adapter.name, I2C_NAME_SIZE, diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index fa6155a54cc..7490dc1771a 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -374,7 +374,7 @@ static int __devinit amd756_probe(struct pci_dev *pdev, dev_dbg(&pdev->dev, "SMBREV = 0x%X\n", temp); dev_dbg(&pdev->dev, "AMD756_smba = 0x%X\n", amd756_ioport); - /* set up the driverfs linkage to our parent device */ + /* set up the sysfs linkage to our parent device */ amd756_smbus.dev.parent = &pdev->dev; sprintf(amd756_smbus.name, "SMBus %s adapter at %04x", diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c index 5bba3fb50d7..e15f9e37716 100644 --- a/drivers/i2c/busses/i2c-amd8111.c +++ b/drivers/i2c/busses/i2c-amd8111.c @@ -371,7 +371,7 @@ static int __devinit amd8111_probe(struct pci_dev *dev, smbus->adapter.algo = &smbus_algorithm; smbus->adapter.algo_data = smbus; - /* set up the driverfs linkage to our parent device */ + /* set up the sysfs linkage to our parent device */ smbus->adapter.dev.parent = &dev->dev; pci_write_config_dword(smbus->dev, AMD_PCI_MISC, 0); diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 21f2671f722..6569a36985b 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -522,7 +522,7 @@ static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id else dev_dbg(&dev->dev, "SMBus using PCI Interrupt\n"); - /* set up the driverfs linkage to our parent device */ + /* set up the sysfs linkage to our parent device */ i801_adapter.dev.parent = &dev->dev; snprintf(i801_adapter.name, I2C_NAME_SIZE, diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index d888293c1a9..21b18090408 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -425,7 +425,7 @@ static int __devinit piix4_probe(struct pci_dev *dev, if (retval) return retval; - /* set up the driverfs linkage to our parent device */ + /* set up the sysfs linkage to our parent device */ piix4_adapter.dev.parent = &dev->dev; snprintf(piix4_adapter.name, I2C_NAME_SIZE, diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c index d333babe4ad..a6feed449db 100644 --- a/drivers/i2c/busses/i2c-sis5595.c +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -384,7 +384,7 @@ static int __devinit sis5595_probe(struct pci_dev *dev, const struct pci_device_ return -ENODEV; } - /* set up the driverfs linkage to our parent device */ + /* set up the sysfs linkage to our parent device */ sis5595_adapter.dev.parent = &dev->dev; sprintf(sis5595_adapter.name, "SMBus SIS5595 adapter at %04x", diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index 172bacf932a..5fd734f99ee 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -477,7 +477,7 @@ static int __devinit sis630_probe(struct pci_dev *dev, const struct pci_device_i return -ENODEV; } - /* set up the driverfs linkage to our parent device */ + /* set up the sysfs linkage to our parent device */ sis630_adapter.dev.parent = &dev->dev; sprintf(sis630_adapter.name, "SMBus SIS630 adapter at %04x", diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c index 73dae449fb2..4157b0cd604 100644 --- a/drivers/i2c/busses/i2c-sis96x.c +++ b/drivers/i2c/busses/i2c-sis96x.c @@ -297,7 +297,7 @@ static int __devinit sis96x_probe(struct pci_dev *dev, return -EINVAL; } - /* set up the driverfs linkage to our parent device */ + /* set up the sysfs linkage to our parent device */ sis96x_adapter.dev.parent = &dev->dev; snprintf(sis96x_adapter.name, I2C_NAME_SIZE, diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c index bbcc62151f7..81520868797 100644 --- a/drivers/i2c/busses/i2c-via.c +++ b/drivers/i2c/busses/i2c-via.c @@ -138,7 +138,7 @@ static int __devinit vt586b_probe(struct pci_dev *dev, const struct pci_device_i outb(inb(I2C_DIR) & ~(I2C_SDA | I2C_SCL), I2C_DIR); outb(inb(I2C_OUT) & ~(I2C_SDA | I2C_SCL), I2C_OUT); - /* set up the driverfs linkage to our parent device */ + /* set up the sysfs linkage to our parent device */ vt586b_adapter.dev.parent = &dev->dev; res = i2c_bit_add_bus(&vt586b_adapter); diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c index 9668b73872c..a967fadb743 100644 --- a/drivers/scsi/osst.c +++ b/drivers/scsi/osst.c @@ -5574,14 +5574,14 @@ static ssize_t osst_version_show(struct device_driver *ddd, char *buf) static DRIVER_ATTR(version, S_IRUGO, osst_version_show, NULL); -static int osst_create_driverfs_files(struct device_driver *driverfs) +static int osst_create_sysfs_files(struct device_driver *sysfs) { - return driver_create_file(driverfs, &driver_attr_version); + return driver_create_file(sysfs, &driver_attr_version); } -static void osst_remove_driverfs_files(struct device_driver *driverfs) +static void osst_remove_sysfs_files(struct device_driver *sysfs) { - driver_remove_file(driverfs, &driver_attr_version); + driver_remove_file(sysfs, &driver_attr_version); } /* @@ -5953,7 +5953,7 @@ static int __init init_osst(void) if (err) goto err_out_chrdev; - err = osst_create_driverfs_files(&osst_template.gendrv); + err = osst_create_sysfs_files(&osst_template.gendrv); if (err) goto err_out_scsidrv; @@ -5973,7 +5973,7 @@ static void __exit exit_osst (void) int i; struct osst_tape * STp; - osst_remove_driverfs_files(&osst_template.gendrv); + osst_remove_sysfs_files(&osst_template.gendrv); scsi_unregister_driver(&osst_template.gendrv); unregister_chrdev(OSST_MAJOR, "osst"); osst_sysfs_cleanup(); diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index a43b9ec3aef..d6fe756eb37 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -54,7 +54,7 @@ #define SCSI_TIMEOUT (2*HZ) /* - * Prefix values for the SCSI id's (stored in driverfs name field) + * Prefix values for the SCSI id's (stored in sysfs name field) */ #define SCSI_UID_SER_NUM 'S' #define SCSI_UID_UNKNOWN 'Z' diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index 3d2e02381e9..98d8411bbcc 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -195,8 +195,8 @@ static int sgl_unmap_user_pages(struct scatterlist *, const unsigned int, int); static int st_probe(struct device *); static int st_remove(struct device *); -static int do_create_driverfs_files(void); -static void do_remove_driverfs_files(void); +static int do_create_sysfs_files(void); +static void do_remove_sysfs_files(void); static int do_create_class_files(struct scsi_tape *, int, int); static struct scsi_driver st_template = { @@ -4193,7 +4193,7 @@ static int __init init_st(void) if (err) goto err_chrdev; - err = do_create_driverfs_files(); + err = do_create_sysfs_files(); if (err) goto err_scsidrv; @@ -4211,7 +4211,7 @@ err_class: static void __exit exit_st(void) { - do_remove_driverfs_files(); + do_remove_sysfs_files(); scsi_unregister_driver(&st_template.gendrv); unregister_chrdev_region(MKDEV(SCSI_TAPE_MAJOR, 0), ST_MAX_TAPE_ENTRIES); @@ -4249,43 +4249,43 @@ static ssize_t st_version_show(struct device_driver *ddd, char *buf) } static DRIVER_ATTR(version, S_IRUGO, st_version_show, NULL); -static int do_create_driverfs_files(void) +static int do_create_sysfs_files(void) { - struct device_driver *driverfs = &st_template.gendrv; + struct device_driver *sysfs = &st_template.gendrv; int err; - err = driver_create_file(driverfs, &driver_attr_try_direct_io); + err = driver_create_file(sysfs, &driver_attr_try_direct_io); if (err) return err; - err = driver_create_file(driverfs, &driver_attr_fixed_buffer_size); + err = driver_create_file(sysfs, &driver_attr_fixed_buffer_size); if (err) goto err_try_direct_io; - err = driver_create_file(driverfs, &driver_attr_max_sg_segs); + err = driver_create_file(sysfs, &driver_attr_max_sg_segs); if (err) goto err_attr_fixed_buf; - err = driver_create_file(driverfs, &driver_attr_version); + err = driver_create_file(sysfs, &driver_attr_version); if (err) goto err_attr_max_sg; return 0; err_attr_max_sg: - driver_remove_file(driverfs, &driver_attr_max_sg_segs); + driver_remove_file(sysfs, &driver_attr_max_sg_segs); err_attr_fixed_buf: - driver_remove_file(driverfs, &driver_attr_fixed_buffer_size); + driver_remove_file(sysfs, &driver_attr_fixed_buffer_size); err_try_direct_io: - driver_remove_file(driverfs, &driver_attr_try_direct_io); + driver_remove_file(sysfs, &driver_attr_try_direct_io); return err; } -static void do_remove_driverfs_files(void) +static void do_remove_sysfs_files(void) { - struct device_driver *driverfs = &st_template.gendrv; + struct device_driver *sysfs = &st_template.gendrv; - driver_remove_file(driverfs, &driver_attr_version); - driver_remove_file(driverfs, &driver_attr_max_sg_segs); - driver_remove_file(driverfs, &driver_attr_fixed_buffer_size); - driver_remove_file(driverfs, &driver_attr_try_direct_io); + driver_remove_file(sysfs, &driver_attr_version); + driver_remove_file(sysfs, &driver_attr_max_sg_segs); + driver_remove_file(sysfs, &driver_attr_fixed_buffer_size); + driver_remove_file(sysfs, &driver_attr_try_direct_io); } diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c index 246afea9e83..43eddaecc3d 100644 --- a/drivers/usb/host/ehci-dbg.c +++ b/drivers/usb/host/ehci-dbg.c @@ -322,7 +322,7 @@ static inline void remove_debug_files (struct ehci_hcd *bus) { } #else -/* troubleshooting help: expose state in driverfs */ +/* troubleshooting help: expose state in sysfs */ #define speed_char(info1) ({ char tmp; \ switch (info1 & (3 << 12)) { \ -- cgit v1.2.3 From 728f0bbd68e98d6a5d6a17aece000d9a3e24f075 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Sat, 17 Feb 2007 19:16:31 +0100 Subject: Remove useless FIND_FIRST_BIT() macro from cardbus.c. Delete the definition of the unused FIND_FIRST_BIT() macro. Signed-off-by: Robert P. J. Day Signed-off-by: Adrian Bunk --- drivers/pcmcia/cardbus.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pcmcia/cardbus.c b/drivers/pcmcia/cardbus.c index 2d7effe7990..a1bd763b4e3 100644 --- a/drivers/pcmcia/cardbus.c +++ b/drivers/pcmcia/cardbus.c @@ -40,8 +40,6 @@ /*====================================================================*/ -#define FIND_FIRST_BIT(n) ((n) - ((n) & ((n)-1))) - /* Offsets in the Expansion ROM Image Header */ #define ROM_SIGNATURE 0x0000 /* 2 bytes */ #define ROM_DATA_PTR 0x0018 /* 2 bytes */ -- cgit v1.2.3 From 4c3ee8266334e927d2318c8d6da5341a01394c0c Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Sat, 17 Feb 2007 19:18:52 +0100 Subject: drivers/scsi/a100u2w.c: trivial typo patch Trivial typo fix. Signed-off-by: Robert P. J. Day Signed-off-by: Adrian Bunk --- drivers/scsi/a100u2w.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c index 2650a5d0a16..7f4241bfb9c 100644 --- a/drivers/scsi/a100u2w.c +++ b/drivers/scsi/a100u2w.c @@ -1067,7 +1067,7 @@ static int __devinit inia100_probe_one(struct pci_dev *pdev, goto out_disable_device; } - /* <02> read from base address + 0x50 offset to get the bios balue. */ + /* <02> read from base address + 0x50 offset to get the bios value. */ bios = ORC_RDWORD(port, 0x50); -- cgit v1.2.3 From bbf2f9fb1c7239ae0aea55f7cb1555f4adc15f76 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Sat, 17 Feb 2007 19:20:16 +0100 Subject: Fix misspellings of "agressive". Fix the various misspellings of "agressive", as well as a couple other things on the same lines while we're there. Signed-off-by: Robert P. J. Day Signed-off-by: Adrian Bunk --- drivers/scsi/sym53c8xx_2/sym_fw1.h | 4 ++-- drivers/scsi/sym53c8xx_2/sym_fw2.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sym53c8xx_2/sym_fw1.h b/drivers/scsi/sym53c8xx_2/sym_fw1.h index 7b39f4a35e9..7b08d6caaa9 100644 --- a/drivers/scsi/sym53c8xx_2/sym_fw1.h +++ b/drivers/scsi/sym53c8xx_2/sym_fw1.h @@ -1020,7 +1020,7 @@ static struct SYM_FWA_SCR SYM_FWA_SCR = { * It shall be a tagged command. * Read SIMPLE+TAG. * The C code will deal with errors. - * Agressive optimization, is'nt it? :) + * Aggressive optimization, isn't it? :) */ SCR_MOVE_ABS (2) ^ SCR_MSG_IN, HADDR_1 (msgin), @@ -1044,7 +1044,7 @@ static struct SYM_FWA_SCR SYM_FWA_SCR = { RADDR_1 (dsa), /* * The SIDL still contains the TAG value. - * Agressive optimization, isn't it? :):) + * Aggressive optimization, isn't it? :):) */ SCR_REG_SFBR (sidl, SCR_SHL, 0), 0, diff --git a/drivers/scsi/sym53c8xx_2/sym_fw2.h b/drivers/scsi/sym53c8xx_2/sym_fw2.h index 851f2706f22..6e5b952312e 100644 --- a/drivers/scsi/sym53c8xx_2/sym_fw2.h +++ b/drivers/scsi/sym53c8xx_2/sym_fw2.h @@ -956,7 +956,7 @@ static struct SYM_FWA_SCR SYM_FWA_SCR = { * It shall be a tagged command. * Read SIMPLE+TAG. * The C code will deal with errors. - * Agressive optimization, is'nt it? :) + * Aggressive optimization, isn't it? :) */ SCR_MOVE_ABS (2) ^ SCR_MSG_IN, HADDR_1 (msgin), @@ -968,7 +968,7 @@ static struct SYM_FWA_SCR SYM_FWA_SCR = { offsetof(struct sym_lcb, head.itlq_tbl_sa), /* * The SIDL still contains the TAG value. - * Agressive optimization, isn't it? :):) + * Aggressive optimization, isn't it? :):) */ SCR_REG_SFBR (sidl, SCR_SHL, 0), 0, -- cgit v1.2.3 From 1b3c3714cb4767d00f507cc6854d3339d82c5b9d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Sat, 17 Feb 2007 19:23:03 +0100 Subject: Fix typos concerning hierarchy MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit heirarchical, hierachical -> hierarchical heirarchy, hierachy -> hierarchy Signed-off-by: Uwe Kleine-König Signed-off-by: Adrian Bunk --- drivers/media/dvb/dvb-core/dvb_frontend.c | 2 +- drivers/media/dvb/frontends/dib3000mb.c | 2 +- drivers/pci/pcie/aer/aerdrv.h | 2 +- drivers/scsi/scsi_transport_fc.c | 2 +- drivers/scsi/scsi_transport_sas.c | 4 ++-- 5 files changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index e85972222ab..7c42d53a1cc 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -915,7 +915,7 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file, fetunesettings.parameters.inversion = INVERSION_AUTO; } if (fe->ops.info.type == FE_OFDM) { - /* without hierachical coding code_rate_LP is irrelevant, + /* without hierarchical coding code_rate_LP is irrelevant, * so we tolerate the otherwise invalid FEC_NONE setting */ if (fepriv->parameters.u.ofdm.hierarchy_information == HIERARCHY_NONE && fepriv->parameters.u.ofdm.code_rate_LP == FEC_NONE) diff --git a/drivers/media/dvb/frontends/dib3000mb.c b/drivers/media/dvb/frontends/dib3000mb.c index adbabfdb04a..b6adea5ffeb 100644 --- a/drivers/media/dvb/frontends/dib3000mb.c +++ b/drivers/media/dvb/frontends/dib3000mb.c @@ -239,7 +239,7 @@ static int dib3000mb_set_frontend(struct dvb_frontend* fe, default: return -EINVAL; } - deb_setf("hierachy: "); + deb_setf("hierarchy: "); switch (ofdm->hierarchy_information) { case HIERARCHY_NONE: deb_setf("none "); diff --git a/drivers/pci/pcie/aer/aerdrv.h b/drivers/pci/pcie/aer/aerdrv.h index 3c0a58f64dd..bf655dbaf8e 100644 --- a/drivers/pci/pcie/aer/aerdrv.h +++ b/drivers/pci/pcie/aer/aerdrv.h @@ -85,7 +85,7 @@ struct aer_rpc { struct mutex rpc_mutex; /* * only one thread could do * recovery on the same - * root port hierachy + * root port hierarchy */ wait_queue_head_t wait_release; }; diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index 0d3c10f2134..58afdb40170 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -855,7 +855,7 @@ static FC_CLASS_DEVICE_ATTR(rport, fast_io_fail_tmo, S_IRUGO | S_IWUSR, /* * Note: in the target show function we recognize when the remote - * port is in the heirarchy and do not allow the driver to get + * port is in the hierarchy and do not allow the driver to get * involved in sysfs functions. The driver only gets involved if * it's the "old" style that doesn't use rports. */ diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c index 6d39150e205..b2ef71a8629 100644 --- a/drivers/scsi/scsi_transport_sas.c +++ b/drivers/scsi/scsi_transport_sas.c @@ -500,7 +500,7 @@ struct sas_phy *sas_phy_alloc(struct device *parent, int number) EXPORT_SYMBOL(sas_phy_alloc); /** - * sas_phy_add -- add a SAS PHY to the device hierachy + * sas_phy_add -- add a SAS PHY to the device hierarchy * @phy: The PHY to be added * * Publishes a SAS PHY to the rest of the system. @@ -1265,7 +1265,7 @@ struct sas_rphy *sas_expander_alloc(struct sas_port *parent, EXPORT_SYMBOL(sas_expander_alloc); /** - * sas_rphy_add -- add a SAS remote PHY to the device hierachy + * sas_rphy_add -- add a SAS remote PHY to the device hierarchy * @rphy: The remote PHY to be added * * Publishes a SAS remote PHY to the rest of the system. -- cgit v1.2.3 From 082f6f9ddcce40e880c1ec03bfb6a06a421188b4 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Sat, 17 Feb 2007 19:36:33 +0100 Subject: fix SCSI_SCAN_ASYNC help text Signed-off-by: Adrian Bunk --- drivers/scsi/Kconfig | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 5bf3f07870b..4cd280e8696 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -230,6 +230,7 @@ config SCSI_SCAN_ASYNC The SCSI subsystem can probe for devices while the rest of the system continues booting, and even probe devices on different busses in parallel, leading to a significant speed-up. + If you have built SCSI as modules, enabling this option can be a problem as the devices may not have been found by the time your system expects them to have been. You can load the @@ -237,8 +238,8 @@ config SCSI_SCAN_ASYNC If you build your SCSI drivers into the kernel, then everything will work fine if you say Y here. - You can override this choice by specifying scsi_mod.scan="sync" - or "async" on the kernel's command line. + You can override this choice by specifying "scsi_mod.scan=sync" + or async on the kernel's command line. menu "SCSI Transports" depends on SCSI -- cgit v1.2.3 From 6486abbf63a58af490144ecbc38375f655d328ad Mon Sep 17 00:00:00 2001 From: Simon Depiets <2df@tuxfamily.org> Date: Sat, 17 Feb 2007 19:42:17 +0100 Subject: fix the BAYCOM_SER_HDX help text This fixes kernel Bugzilla #4076. Signed-off-by: Adrian Bunk --- drivers/net/hamradio/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig index feb0ada7a02..6e90619b3b4 100644 --- a/drivers/net/hamradio/Kconfig +++ b/drivers/net/hamradio/Kconfig @@ -138,7 +138,7 @@ config BAYCOM_SER_HDX ---help--- This is one of two drivers for Baycom style simple amateur radio modems that connect to a serial interface. The driver supports the - ser12 design in full-duplex mode. This is the old driver. It is + ser12 design in half-duplex mode. This is the old driver. It is still provided in case your serial interface chip does not work with the full-duplex driver. This driver is depreciated. To configure the driver, use the sethdlc utility available in the standard ax25 @@ -190,3 +190,4 @@ config YAM To compile this driver as a module, choose M here: the module will be called yam. + -- cgit v1.2.3 From edd023d0b86b599a8e89c1c014911129210fb955 Mon Sep 17 00:00:00 2001 From: John Daiker Date: Sat, 17 Feb 2007 19:52:10 +0100 Subject: add a help text for BLK_DEV_GENERIC This fixes kernel Bugzilla #4933. Signed-off-by: Adrian Bunk --- drivers/ide/Kconfig | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index ec03341d2bd..6adf8649764 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -383,6 +383,9 @@ config BLK_DEV_OFFBOARD config BLK_DEV_GENERIC tristate "Generic PCI IDE Chipset Support" depends on BLK_DEV_IDEPCI + help + This option provides generic support for various PCI IDE Chipsets + which otherwise might not be supported. config BLK_DEV_OPTI621 tristate "OPTi 82C621 chipset enhanced support (EXPERIMENTAL)" -- cgit v1.2.3 From 4b2d5c049079d342e3e268c162dcecbd7bad1411 Mon Sep 17 00:00:00 2001 From: Shane Shrybman Date: Sat, 17 Feb 2007 19:56:23 +0100 Subject: drivers/net/eexpress.c: remove duplicate comment Signed-off-by: Adrian Bunk --- drivers/net/eexpress.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/eexpress.c b/drivers/net/eexpress.c index 4a50fcb5ad6..3868b803126 100644 --- a/drivers/net/eexpress.c +++ b/drivers/net/eexpress.c @@ -707,13 +707,6 @@ static int eexp_xmit(struct sk_buff *buf, struct net_device *dev) return 0; } -/* - * Handle an EtherExpress interrupt - * If we've finished initializing, start the RU and CU up. - * If we've already started, reap tx buffers, handle any received packets, - * check to make sure we've not become wedged. - */ - /* * Handle an EtherExpress interrupt * If we've finished initializing, start the RU and CU up. -- cgit v1.2.3 From c5a69d57eb48e36f84c0737b5b24ec277d7dbfba Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Sat, 17 Feb 2007 20:11:19 +0100 Subject: Storage class should be before const qualifier The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser Signed-off-by: Adrian Bunk --- drivers/ieee1394/ohci1394.c | 2 +- drivers/input/serio/libps2.c | 2 +- drivers/media/video/pvrusb2/pvrusb2-audio.c | 2 +- drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c | 2 +- drivers/media/video/pvrusb2/pvrusb2-std.c | 4 ++-- drivers/media/video/pvrusb2/pvrusb2-tuner.c | 2 +- drivers/media/video/pvrusb2/pvrusb2-video-v4l.c | 2 +- drivers/media/video/pvrusb2/pvrusb2-wm8775.c | 2 +- drivers/scsi/arm/eesox.c | 2 +- 9 files changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/ieee1394/ohci1394.c b/drivers/ieee1394/ohci1394.c index e982d60ac4b..06fac0d2126 100644 --- a/drivers/ieee1394/ohci1394.c +++ b/drivers/ieee1394/ohci1394.c @@ -180,7 +180,7 @@ static int alloc_dma_trm_ctx(struct ti_ohci *ohci, struct dma_trm_ctx *d, static void ohci1394_pci_remove(struct pci_dev *pdev); #ifndef __LITTLE_ENDIAN -const static size_t hdr_sizes[] = { +static const size_t hdr_sizes[] = { 3, /* TCODE_WRITEQ */ 4, /* TCODE_WRITEB */ 3, /* TCODE_WRITE_RESPONSE */ diff --git a/drivers/input/serio/libps2.c b/drivers/input/serio/libps2.c index b3e84d3bb7f..10d9d74ae43 100644 --- a/drivers/input/serio/libps2.c +++ b/drivers/input/serio/libps2.c @@ -97,7 +97,7 @@ EXPORT_SYMBOL(ps2_drain); int ps2_is_keyboard_id(char id_byte) { - const static char keyboard_ids[] = { + static const char keyboard_ids[] = { 0xab, /* Regular keyboards */ 0xac, /* NCD Sun keyboard */ 0x2b, /* Trust keyboard, translated */ diff --git a/drivers/media/video/pvrusb2/pvrusb2-audio.c b/drivers/media/video/pvrusb2/pvrusb2-audio.c index 9846c464ec8..122496f3684 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-audio.c +++ b/drivers/media/video/pvrusb2/pvrusb2-audio.c @@ -158,7 +158,7 @@ static unsigned int pvr2_msp3400_describe(struct pvr2_msp3400_handler *ctxt, } -const static struct pvr2_i2c_handler_functions msp3400_funcs = { +static const struct pvr2_i2c_handler_functions msp3400_funcs = { .detach = (void (*)(void *))pvr2_msp3400_detach, .check = (int (*)(void *))msp3400_check, .update = (void (*)(void *))msp3400_update, diff --git a/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c b/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c index 848fb233d80..8df969c4874 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c +++ b/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c @@ -226,7 +226,7 @@ static void decoder_reset(struct pvr2_v4l_cx2584x *ctxt) } -const static struct pvr2_i2c_handler_functions hfuncs = { +static const struct pvr2_i2c_handler_functions hfuncs = { .detach = (void (*)(void *))decoder_detach, .check = (int (*)(void *))decoder_check, .update = (void (*)(void *))decoder_update, diff --git a/drivers/media/video/pvrusb2/pvrusb2-std.c b/drivers/media/video/pvrusb2/pvrusb2-std.c index f95c598ff62..c08925557ed 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-std.c +++ b/drivers/media/video/pvrusb2/pvrusb2-std.c @@ -78,14 +78,14 @@ struct std_name { #define CSTD_ALL (CSTD_PAL|CSTD_NTSC|CSTD_SECAM) /* Mapping of standard bits to color system */ -const static struct std_name std_groups[] = { +static const struct std_name std_groups[] = { {"PAL",CSTD_PAL}, {"NTSC",CSTD_NTSC}, {"SECAM",CSTD_SECAM}, }; /* Mapping of standard bits to modulation system */ -const static struct std_name std_items[] = { +static const struct std_name std_items[] = { {"B",TSTD_B}, {"B1",TSTD_B1}, {"D",TSTD_D}, diff --git a/drivers/media/video/pvrusb2/pvrusb2-tuner.c b/drivers/media/video/pvrusb2/pvrusb2-tuner.c index af9f246f8d3..bb17db3f643 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-tuner.c +++ b/drivers/media/video/pvrusb2/pvrusb2-tuner.c @@ -80,7 +80,7 @@ static unsigned int pvr2_tuner_describe(struct pvr2_tuner_handler *ctxt,char *bu } -const static struct pvr2_i2c_handler_functions tuner_funcs = { +static const struct pvr2_i2c_handler_functions tuner_funcs = { .detach = (void (*)(void *))pvr2_tuner_detach, .check = (int (*)(void *))tuner_check, .update = (void (*)(void *))tuner_update, diff --git a/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c b/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c index 05f2cddeb47..2a826464911 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c +++ b/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c @@ -201,7 +201,7 @@ static unsigned int decoder_describe(struct pvr2_v4l_decoder *ctxt,char *buf,uns } -const static struct pvr2_i2c_handler_functions hfuncs = { +static const struct pvr2_i2c_handler_functions hfuncs = { .detach = (void (*)(void *))decoder_detach, .check = (int (*)(void *))decoder_check, .update = (void (*)(void *))decoder_update, diff --git a/drivers/media/video/pvrusb2/pvrusb2-wm8775.c b/drivers/media/video/pvrusb2/pvrusb2-wm8775.c index 2413e5198e1..7794c34c355 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-wm8775.c +++ b/drivers/media/video/pvrusb2/pvrusb2-wm8775.c @@ -126,7 +126,7 @@ static void wm8775_update(struct pvr2_v4l_wm8775 *ctxt) } -const static struct pvr2_i2c_handler_functions hfuncs = { +static const struct pvr2_i2c_handler_functions hfuncs = { .detach = (void (*)(void *))wm8775_detach, .check = (int (*)(void *))wm8775_check, .update = (void (*)(void *))wm8775_update, diff --git a/drivers/scsi/arm/eesox.c b/drivers/scsi/arm/eesox.c index 4677152142d..d4136524fc4 100644 --- a/drivers/scsi/arm/eesox.c +++ b/drivers/scsi/arm/eesox.c @@ -196,7 +196,7 @@ static void eesoxscsi_buffer_in(void *buf, int length, void __iomem *base) const void __iomem *reg_fas = base + EESOX_FAS216_OFFSET; const void __iomem *reg_dmastat = base + EESOX_DMASTAT; const void __iomem *reg_dmadata = base + EESOX_DMADATA; - const register unsigned long mask = 0xffff; + register const unsigned long mask = 0xffff; do { unsigned int status; -- cgit v1.2.3