From b9ccd4a90bbb964506f01b4bdcff4f50f8d5d334 Mon Sep 17 00:00:00 2001 From: Mikael Pettersson Date: Tue, 30 Oct 2007 14:20:49 +0100 Subject: sata_promise: ASIC PRD table bug workaround, take 2 Second-generation Promise SATA controllers have an ASIC bug which can trigger if the last PRD entry is larger than 164 bytes, resulting in intermittent errors and possible data corruption. Work around this by replacing calls to ata_qc_prep() with a private version that fills the PRD, checks the size of the last entry, and if necessary splits it to avoid the bug. Also reduce sg_tablesize by 1 to accommodate the new entry. Tested on the second-generation SATA300 TX4 and SATA300 TX2plus, and the first-generation PDC20378. Thanks to Alexander Sabourenkov for verifying the bug by studying the vendor driver, and for writing the initial patch upon which this one is based. Signed-off-by: Mikael Pettersson -- Changes since previous version: * use new PDC_MAX_PRD constant to initialise sg_tablesize drivers/ata/sata_promise.c | 87 ++++++++++++++++++++++++++++++++++++++++++--- 1 files changed, 83 insertions(+), 4 deletions(-) Signed-off-by: Jeff Garzik --- drivers/ata/sata_promise.c | 87 +++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 83 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index deb26f04f2d..3fdc7cbd943 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -50,6 +50,7 @@ enum { PDC_MAX_PORTS = 4, PDC_MMIO_BAR = 3, + PDC_MAX_PRD = LIBATA_MAX_PRD - 1, /* -1 for ASIC PRD bug workaround */ /* register offsets */ PDC_FEATURE = 0x04, /* Feature/Error reg (per port) */ @@ -157,7 +158,7 @@ static struct scsi_host_template pdc_ata_sht = { .queuecommand = ata_scsi_queuecmd, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, + .sg_tablesize = PDC_MAX_PRD, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ATA_SHT_USE_CLUSTERING, @@ -523,6 +524,84 @@ static void pdc_atapi_pkt(struct ata_queued_cmd *qc) memcpy(buf+31, cdb, cdb_len); } +/** + * pdc_fill_sg - Fill PCI IDE PRD table + * @qc: Metadata associated with taskfile to be transferred + * + * Fill PCI IDE PRD (scatter-gather) table with segments + * associated with the current disk command. + * Make sure hardware does not choke on it. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + */ +static void pdc_fill_sg(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct scatterlist *sg; + unsigned int idx; + const u32 SG_COUNT_ASIC_BUG = 41*4; + + if (!(qc->flags & ATA_QCFLAG_DMAMAP)) + return; + + WARN_ON(qc->__sg == NULL); + WARN_ON(qc->n_elem == 0 && qc->pad_len == 0); + + idx = 0; + ata_for_each_sg(sg, qc) { + u32 addr, offset; + u32 sg_len, len; + + /* determine if physical DMA addr spans 64K boundary. + * Note h/w doesn't support 64-bit, so we unconditionally + * truncate dma_addr_t to u32. + */ + addr = (u32) sg_dma_address(sg); + sg_len = sg_dma_len(sg); + + while (sg_len) { + offset = addr & 0xffff; + len = sg_len; + if ((offset + sg_len) > 0x10000) + len = 0x10000 - offset; + + ap->prd[idx].addr = cpu_to_le32(addr); + ap->prd[idx].flags_len = cpu_to_le32(len & 0xffff); + VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len); + + idx++; + sg_len -= len; + addr += len; + } + } + + if (idx) { + u32 len = le32_to_cpu(ap->prd[idx - 1].flags_len); + + if (len > SG_COUNT_ASIC_BUG) { + u32 addr; + + VPRINTK("Splitting last PRD.\n"); + + addr = le32_to_cpu(ap->prd[idx - 1].addr); + ap->prd[idx - 1].flags_len -= cpu_to_le32(SG_COUNT_ASIC_BUG); + VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx - 1, addr, SG_COUNT_ASIC_BUG); + + addr = addr + len - SG_COUNT_ASIC_BUG; + len = SG_COUNT_ASIC_BUG; + ap->prd[idx].addr = cpu_to_le32(addr); + ap->prd[idx].flags_len = cpu_to_le32(len); + VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len); + + idx++; + } + + ap->prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); + } +} + static void pdc_qc_prep(struct ata_queued_cmd *qc) { struct pdc_port_priv *pp = qc->ap->private_data; @@ -532,7 +611,7 @@ static void pdc_qc_prep(struct ata_queued_cmd *qc) switch (qc->tf.protocol) { case ATA_PROT_DMA: - ata_qc_prep(qc); + pdc_fill_sg(qc); /* fall through */ case ATA_PROT_NODATA: @@ -548,11 +627,11 @@ static void pdc_qc_prep(struct ata_queued_cmd *qc) break; case ATA_PROT_ATAPI: - ata_qc_prep(qc); + pdc_fill_sg(qc); break; case ATA_PROT_ATAPI_DMA: - ata_qc_prep(qc); + pdc_fill_sg(qc); /*FALLTHROUGH*/ case ATA_PROT_ATAPI_NODATA: pdc_atapi_pkt(qc); -- cgit v1.2.3 From 5595ddf98cb3bf2c18b3b96587a1a9b0b08c267a Mon Sep 17 00:00:00 2001 From: Mikael Pettersson Date: Tue, 30 Oct 2007 14:21:55 +0100 Subject: sata_promise: cleanups Minor sata_promise cleanups: - use C99 array initialisers in pdc_port_info[] - add myself in the file head's Maintained by note, since users don't always read the MAINTAINERS file - SG/PRD bug workaround warrants driver version bump Signed-off-by: Mikael Pettersson -- drivers/ata/sata_promise.c | 17 +++++++++-------- 1 files changed, 9 insertions(+), 8 deletions(-) Signed-off-by: Jeff Garzik --- drivers/ata/sata_promise.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index 3fdc7cbd943..825e717bcef 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -2,6 +2,7 @@ * sata_promise.c - Promise SATA * * Maintained by: Jeff Garzik + * Mikael Pettersson * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * @@ -45,7 +46,7 @@ #include "sata_promise.h" #define DRV_NAME "sata_promise" -#define DRV_VERSION "2.10" +#define DRV_VERSION "2.11" enum { PDC_MAX_PORTS = 4, @@ -241,7 +242,7 @@ static const struct ata_port_operations pdc_pata_ops = { }; static const struct ata_port_info pdc_port_info[] = { - /* board_2037x */ + [board_2037x] = { .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA | PDC_FLAG_SATA_PATA, @@ -251,7 +252,7 @@ static const struct ata_port_info pdc_port_info[] = { .port_ops = &pdc_old_sata_ops, }, - /* board_2037x_pata */ + [board_2037x_pata] = { .flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS, .pio_mask = 0x1f, /* pio0-4 */ @@ -260,7 +261,7 @@ static const struct ata_port_info pdc_port_info[] = { .port_ops = &pdc_pata_ops, }, - /* board_20319 */ + [board_20319] = { .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA | PDC_FLAG_4_PORTS, @@ -270,7 +271,7 @@ static const struct ata_port_info pdc_port_info[] = { .port_ops = &pdc_old_sata_ops, }, - /* board_20619 */ + [board_20619] = { .flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS | PDC_FLAG_4_PORTS, @@ -280,7 +281,7 @@ static const struct ata_port_info pdc_port_info[] = { .port_ops = &pdc_pata_ops, }, - /* board_2057x */ + [board_2057x] = { .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA | PDC_FLAG_GEN_II | PDC_FLAG_SATA_PATA, @@ -290,7 +291,7 @@ static const struct ata_port_info pdc_port_info[] = { .port_ops = &pdc_sata_ops, }, - /* board_2057x_pata */ + [board_2057x_pata] = { .flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS | PDC_FLAG_GEN_II, @@ -300,7 +301,7 @@ static const struct ata_port_info pdc_port_info[] = { .port_ops = &pdc_pata_ops, }, - /* board_40518 */ + [board_40518] = { .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA | PDC_FLAG_GEN_II | PDC_FLAG_4_PORTS, -- cgit v1.2.3 From b666da35d900c26cbea1caa465649e2e0afa406c Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 26 Oct 2007 15:53:59 +0900 Subject: libata: flush is an IO command ATA_QCFLAG_IO is used to mark commands which are used to perform regluar IO transfers via block layer. These commands are assumed to be valid and taken more seriously during error handling. Cache flush is used by regular IO path and necessary for data integrity. Mark it with ATA_QCFLAG_IO. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-scsi.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 93bd36c1969..6ef5ecb917c 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1108,6 +1108,9 @@ static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc) else tf->command = ATA_CMD_FLUSH; + /* flush is critical for IO integrity, consider it an IO command */ + qc->flags |= ATA_QCFLAG_IO; + return 0; } -- cgit v1.2.3 From f90f0828e57e97cb1ff19520d252882cfc6fb3c0 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 26 Oct 2007 16:12:41 +0900 Subject: libata: stop being overjealous about non-IO commands libata EH always revalidated device and retried failed command after error except for ATAPI CCs. This is unnecessary and hinders with users issuing direct commands. This patch makes the following changes. * Make sata_sil24 not request ATA_EH_REVALIDATE on device errors. sil24 is the only driver which does this. All others let libata EH core code decide. * Don't request revalidation after device error of non-IO command. Revalidation doesn't really help anybody. As ATA_EH_REVALIDATE isn't set by default, there's no reason to clear it after sense data is read. Kill ATA_EH_REVALIDATE clearing code while at it. * Don't retry non-IO command after device error. Device has rejected the command. There's no point in retrying. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 16 +++++++++++----- drivers/ata/sata_sil24.c | 6 +++--- 2 files changed, 14 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index fefea7470e5..3c6ad7d949c 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1800,10 +1800,8 @@ static void ata_eh_link_autopsy(struct ata_link *link) qc->err_mask &= ~AC_ERR_OTHER; /* SENSE_VALID trumps dev/unknown error and revalidation */ - if (qc->flags & ATA_QCFLAG_SENSE_VALID) { + if (qc->flags & ATA_QCFLAG_SENSE_VALID) qc->err_mask &= ~(AC_ERR_DEV | AC_ERR_OTHER); - ehc->i.action &= ~ATA_EH_REVALIDATE; - } /* accumulate error info */ ehc->i.dev = qc->dev; @@ -1816,7 +1814,8 @@ static void ata_eh_link_autopsy(struct ata_link *link) if (ap->pflags & ATA_PFLAG_FROZEN || all_err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT)) ehc->i.action |= ATA_EH_SOFTRESET; - else if (all_err_mask) + else if ((is_io && all_err_mask) || + (!is_io && (all_err_mask & ~AC_ERR_DEV))) ehc->i.action |= ATA_EH_REVALIDATE; /* if we have offending qcs and the associated failed device */ @@ -2697,8 +2696,15 @@ void ata_eh_finish(struct ata_port *ap) /* FIXME: Once EH migration is complete, * generate sense data in this function, * considering both err_mask and tf. + * + * There's no point in retrying invalid + * (detected by libata) and non-IO device + * errors (rejected by device). Finish them + * immediately. */ - if (qc->err_mask & AC_ERR_INVALID) + if ((qc->err_mask & AC_ERR_INVALID) || + (!(qc->flags & ATA_QCFLAG_IO) && + qc->err_mask == AC_ERR_DEV)) ata_eh_qc_complete(qc); else ata_eh_qc_retry(qc); diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index 3c481e0e0c0..187dcb02c68 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -265,11 +265,11 @@ static struct sil24_cerr_info { unsigned int err_mask, action; const char *desc; } sil24_cerr_db[] = { - [0] = { AC_ERR_DEV, ATA_EH_REVALIDATE, + [0] = { AC_ERR_DEV, 0, "device error" }, - [PORT_CERR_DEV] = { AC_ERR_DEV, ATA_EH_REVALIDATE, + [PORT_CERR_DEV] = { AC_ERR_DEV, 0, "device error via D2H FIS" }, - [PORT_CERR_SDB] = { AC_ERR_DEV, ATA_EH_REVALIDATE, + [PORT_CERR_SDB] = { AC_ERR_DEV, 0, "device error via SDB FIS" }, [PORT_CERR_DATA] = { AC_ERR_ATA_BUS, ATA_EH_SOFTRESET, "error in data FIS" }, -- cgit v1.2.3 From e027bd36c146582cef382364e5c826db93d4427b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 26 Oct 2007 16:19:26 +0900 Subject: libata: implement and use ATA_QCFLAG_QUIET Implement ATA_QCFLAG_QUIET which indicates that there's no need to report if the command fails with AC_ERR_DEV and set it for passthrough commands. Combined with previous changes, this now makes device errors for all direct commands reported directly to the issuer without going through EH actions and reporting. Note that EH is still invoked after non-IO device errors to determine the nature of the error and resume command execution (some controller requires special care after error to continue). It just performs default maintenance after error, examines what's going on, realizes that it's none of its business and reports the command failure without logging any error messages. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 4 +++- drivers/ata/libata-scsi.c | 4 ++-- 2 files changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 3c6ad7d949c..8d64f8fd8f1 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1878,7 +1878,9 @@ static void ata_eh_link_report(struct ata_link *link) for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); - if (!(qc->flags & ATA_QCFLAG_FAILED) || qc->dev->link != link) + if (!(qc->flags & ATA_QCFLAG_FAILED) || qc->dev->link != link || + ((qc->flags & ATA_QCFLAG_QUIET) && + qc->err_mask == AC_ERR_DEV)) continue; if (qc->flags & ATA_QCFLAG_SENSE_VALID && !qc->err_mask) continue; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 6ef5ecb917c..fc89590d377 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -2767,8 +2767,8 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc) */ qc->nbytes = scsi_bufflen(scmd); - /* request result TF */ - qc->flags |= ATA_QCFLAG_RESULT_TF; + /* request result TF and be quiet about device error */ + qc->flags |= ATA_QCFLAG_RESULT_TF | ATA_QCFLAG_QUIET; return 0; -- cgit v1.2.3