From 8e3dae2b4727dc216e2dc16d2f0271b5f31b680c Mon Sep 17 00:00:00 2001 From: David Fries Date: Wed, 15 Oct 2008 22:05:01 -0700 Subject: W1: w1_io.c reset comments and msleep w1_reset_bus, added some comments about the timing and switched to msleep for the later delay. I don't have the hardware to test the sleep after reset change. The one wire doesn't have a timing requirement between commands so it is fine. I do have the USB hardware and it would be in big trouble with 10ms interrupt transfers to find that the reset completed. Signed-off-by: David Fries Signed-off-by: Evgeniy Polyakov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/w1/w1_io.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c index 97b338a16ab..f4f82f1f486 100644 --- a/drivers/w1/w1_io.c +++ b/drivers/w1/w1_io.c @@ -293,12 +293,24 @@ int w1_reset_bus(struct w1_master *dev) result = dev->bus_master->reset_bus(dev->bus_master->data) & 0x1; else { dev->bus_master->write_bit(dev->bus_master->data, 0); + /* minimum 480, max ? us + * be nice and sleep, except 18b20 spec lists 960us maximum, + * so until we can sleep with microsecond accuracy, spin. + * Feel free to come up with some other way to give up the + * cpu for such a short amount of time AND get it back in + * the maximum amount of time. + */ w1_delay(480); dev->bus_master->write_bit(dev->bus_master->data, 1); w1_delay(70); result = dev->bus_master->read_bit(dev->bus_master->data) & 0x1; - w1_delay(410); + /* minmum 70 (above) + 410 = 480 us + * There aren't any timing requirements between a reset and + * the following transactions. Sleeping is safe here. + */ + /* w1_delay(410); min required time */ + msleep(1); } return result; -- cgit v1.2.3