From a7db74f4be3835fd16c6c582d320f692ccccc622 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 3 Dec 2008 22:21:20 -0600 Subject: rtl8187: Improve wireless statistics for RTL8187 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The current wireless statistics for the RTL8187 poorly indicate the signal strength and quality. With testing, I found that the AGC value is inversely correlated with the strength as in the RTL8187B. By implementing a similar calculation, much more code becomes common to the two devices. Signed-off-by: Larry Finger Tested by: Martín Ernesto Barreyro Acked-by: Hin-Tak Leung Signed-off-by: John W. Linville --- drivers/net/wireless/rtl818x/rtl8187_dev.c | 49 +++++++++--------------------- 1 file changed, 15 insertions(+), 34 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c index dbf52e8bbd7..417a2d7b576 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c @@ -313,29 +313,14 @@ static void rtl8187_rx_cb(struct urb *urb) struct rtl8187_rx_hdr *hdr = (typeof(hdr))(skb_tail_pointer(skb) - sizeof(*hdr)); flags = le32_to_cpu(hdr->flags); - signal = hdr->signal & 0x7f; + /* As with the RTL8187B below, the AGC is used to calculate + * signal strength and quality. In this case, the scaling + * constants are derived from the output of p54usb. + */ + quality = 130 - ((41 * hdr->agc) >> 6); + signal = -4 - ((27 * hdr->agc) >> 6); rx_status.antenna = (hdr->signal >> 7) & 1; - rx_status.noise = hdr->noise; rx_status.mactime = le64_to_cpu(hdr->mac_time); - priv->quality = signal; - rx_status.qual = priv->quality; - priv->noise = hdr->noise; - rate = (flags >> 20) & 0xF; - if (rate > 3) { /* OFDM rate */ - if (signal > 90) - signal = 90; - else if (signal < 25) - signal = 25; - signal = 90 - signal; - } else { /* CCK rate */ - if (signal > 95) - signal = 95; - else if (signal < 30) - signal = 30; - signal = 95 - signal; - } - rx_status.signal = signal; - priv->signal = signal; } else { struct rtl8187b_rx_hdr *hdr = (typeof(hdr))(skb_tail_pointer(skb) - sizeof(*hdr)); @@ -353,18 +338,18 @@ static void rtl8187_rx_cb(struct urb *urb) */ flags = le32_to_cpu(hdr->flags); quality = 170 - hdr->agc; - if (quality > 100) - quality = 100; signal = 14 - hdr->agc / 2; - rx_status.qual = quality; - priv->quality = quality; - rx_status.signal = signal; - priv->signal = signal; rx_status.antenna = (hdr->rssi >> 7) & 1; rx_status.mactime = le64_to_cpu(hdr->mac_time); - rate = (flags >> 20) & 0xF; } + if (quality > 100) + quality = 100; + rx_status.qual = quality; + priv->quality = quality; + rx_status.signal = signal; + priv->signal = signal; + rate = (flags >> 20) & 0xF; skb_trim(skb, flags & 0x0FFF); rx_status.rate_idx = rate; rx_status.freq = dev->conf.channel->center_freq; @@ -1293,6 +1278,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf, priv->mode = NL80211_IFTYPE_MONITOR; dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | + IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_RX_INCLUDES_FCS; eeprom.data = dev; @@ -1408,13 +1394,8 @@ static int __devinit rtl8187_probe(struct usb_interface *intf, (*channel++).hw_value = txpwr >> 8; } - if (priv->is_rtl8187b) { + if (priv->is_rtl8187b) printk(KERN_WARNING "rtl8187: 8187B chip detected.\n"); - dev->flags |= IEEE80211_HW_SIGNAL_DBM; - } else { - dev->flags |= IEEE80211_HW_SIGNAL_UNSPEC; - dev->max_signal = 65; - } /* * XXX: Once this driver supports anything that requires -- cgit v1.2.3