From 2f2fa13d5665d7d5f2ba6068dd28ca7796fa9ea8 Mon Sep 17 00:00:00 2001 From: Shyam Sundar Date: Mon, 12 May 2008 22:21:07 -0700 Subject: [SCSI] qla2xxx: Return correct port_type to FC-transport for Vports. For Vports, the port_type should be set to FC_PORTTYPE_NPIV. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_attr.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 287690853ca..2caf841cbba 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -886,9 +886,13 @@ qla2x00_get_host_speed(struct Scsi_Host *shost) static void qla2x00_get_host_port_type(struct Scsi_Host *shost) { - scsi_qla_host_t *ha = to_qla_parent(shost_priv(shost)); + scsi_qla_host_t *ha = shost_priv(shost); uint32_t port_type = FC_PORTTYPE_UNKNOWN; + if (ha->parent) { + fc_host_port_type(shost) = FC_PORTTYPE_NPIV; + return; + } switch (ha->current_topology) { case ISP_CFG_NL: port_type = FC_PORTTYPE_LPORT; -- cgit v1.2.3 From fd9a29f03600f306acb4faf49b92ca5472f39ee8 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Mon, 12 May 2008 22:21:08 -0700 Subject: [SCSI] qla2xxx: Display driver version at module init-time. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_os.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 3223fd16bcf..dd1e117aff5 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -2864,7 +2864,8 @@ qla2x00_module_init(void) return -ENODEV; } - printk(KERN_INFO "QLogic Fibre Channel HBA Driver\n"); + printk(KERN_INFO "QLogic Fibre Channel HBA Driver: %s\n", + qla2x00_version_str); ret = pci_register_driver(&qla2xxx_pci_driver); if (ret) { kmem_cache_destroy(srb_cachep); -- cgit v1.2.3 From 0e973a24f02ed8c627271b013d69683b4497828d Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Mon, 12 May 2008 22:21:09 -0700 Subject: [SCSI] qla2xxx: Correct locking within MSI-X interrupt handlers. Both MSI-X vector handlers attempt to acquire the HA's hardware_lock. This though requires that interrupts be disabled/enabled during acquisition and release of the spinlock. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_isr.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 5d9a64a7879..0793aa9f161 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -1639,12 +1639,12 @@ qla24xx_msix_rsp_q(int irq, void *dev_id) ha = dev_id; reg = &ha->iobase->isp24; - spin_lock(&ha->hardware_lock); + spin_lock_irq(&ha->hardware_lock); qla24xx_process_response_queue(ha); WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT); - spin_unlock(&ha->hardware_lock); + spin_unlock_irq(&ha->hardware_lock); return IRQ_HANDLED; } @@ -1663,7 +1663,7 @@ qla24xx_msix_default(int irq, void *dev_id) reg = &ha->iobase->isp24; status = 0; - spin_lock(&ha->hardware_lock); + spin_lock_irq(&ha->hardware_lock); do { stat = RD_REG_DWORD(®->host_status); if (stat & HSRX_RISC_PAUSED) { @@ -1716,7 +1716,7 @@ qla24xx_msix_default(int irq, void *dev_id) } WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT); } while (0); - spin_unlock(&ha->hardware_lock); + spin_unlock_irq(&ha->hardware_lock); if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) && (status & MBX_INTERRUPT) && ha->flags.mbox_int) { -- cgit v1.2.3 From e1e82b6f0df0c5175ddd3d4f8862507aa71da8e9 Mon Sep 17 00:00:00 2001 From: Daniel Walker Date: Mon, 12 May 2008 22:21:10 -0700 Subject: [SCSI] qla2xxx: firmware semaphore to mutex Signed-off-by: Daniel Walker Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_os.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index dd1e117aff5..9982ecd9c61 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include @@ -2634,7 +2635,7 @@ qla2x00_timer(scsi_qla_host_t *ha) #define FW_FILE_ISP24XX "ql2400_fw.bin" #define FW_FILE_ISP25XX "ql2500_fw.bin" -static DECLARE_MUTEX(qla_fw_lock); +static DEFINE_MUTEX(qla_fw_lock); static struct fw_blob qla_fw_blobs[FW_BLOBS] = { { .name = FW_FILE_ISP21XX, .segs = { 0x1000, 0 }, }, @@ -2665,7 +2666,7 @@ qla2x00_request_firmware(scsi_qla_host_t *ha) blob = &qla_fw_blobs[FW_ISP25XX]; } - down(&qla_fw_lock); + mutex_lock(&qla_fw_lock); if (blob->fw) goto out; @@ -2678,7 +2679,7 @@ qla2x00_request_firmware(scsi_qla_host_t *ha) } out: - up(&qla_fw_lock); + mutex_unlock(&qla_fw_lock); return blob; } @@ -2687,11 +2688,11 @@ qla2x00_release_firmware(void) { int idx; - down(&qla_fw_lock); + mutex_lock(&qla_fw_lock); for (idx = 0; idx < FW_BLOBS; idx++) if (qla_fw_blobs[idx].fw) release_firmware(qla_fw_blobs[idx].fw); - up(&qla_fw_lock); + mutex_unlock(&qla_fw_lock); } static pci_ers_result_t -- cgit v1.2.3 From 6c2f527cb84cbd7d2d8a668c979e70bf78980ccc Mon Sep 17 00:00:00 2001 From: "matthias@kaehlcke.net" Date: Mon, 12 May 2008 22:21:11 -0700 Subject: [SCSI] qla2xxx: Convert vport_sem to a mutex The semaphore vport_sem is used as a mutex. Convert it to the mutex API. Signed-off-by: Matthias Kaehlcke Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_attr.c | 4 ++-- drivers/scsi/qla2xxx/qla_def.h | 2 +- drivers/scsi/qla2xxx/qla_mbx.c | 4 ++-- drivers/scsi/qla2xxx/qla_mid.c | 18 +++++++++--------- drivers/scsi/qla2xxx/qla_os.c | 2 +- 5 files changed, 15 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 2caf841cbba..48318d0f088 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -1176,10 +1176,10 @@ qla24xx_vport_delete(struct fc_vport *fc_vport) qla24xx_disable_vp(vha); qla24xx_deallocate_vp_id(vha); - down(&ha->vport_sem); + mutex_lock(&ha->vport_lock); ha->cur_vport_count--; clear_bit(vha->vp_idx, ha->vp_idx_map); - up(&ha->vport_sem); + mutex_unlock(&ha->vport_lock); kfree(vha->node_name); kfree(vha->port_name); diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 299eccf6cab..8dd600013bd 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2457,7 +2457,7 @@ typedef struct scsi_qla_host { #define MBX_INTR_WAIT 2 #define MBX_UPDATE_FLASH_ACTIVE 3 - struct semaphore vport_sem; /* Virtual port synchronization */ + struct mutex vport_lock; /* Virtual port synchronization */ struct completion mbx_cmd_comp; /* Serialize mbx access */ struct completion mbx_intr_comp; /* Used for completion notification */ diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 21006042080..3800876f96c 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -2807,9 +2807,9 @@ qla24xx_control_vp(scsi_qla_host_t *vha, int cmd) */ map = (vp_index - 1) / 8; pos = (vp_index - 1) & 7; - down(&ha->vport_sem); + mutex_lock(&ha->vport_lock); vce->vp_idx_map[map] |= 1 << pos; - up(&ha->vport_sem); + mutex_unlock(&ha->vport_lock); rval = qla2x00_issue_iocb(ha, vce, vce_dma, 0); if (rval != QLA_SUCCESS) { diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c index f2b04979e5f..fc55429dc91 100644 --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -32,12 +32,12 @@ qla24xx_allocate_vp_id(scsi_qla_host_t *vha) scsi_qla_host_t *ha = vha->parent; /* Find an empty slot and assign an vp_id */ - down(&ha->vport_sem); + mutex_lock(&ha->vport_lock); vp_id = find_first_zero_bit(ha->vp_idx_map, ha->max_npiv_vports + 1); if (vp_id > ha->max_npiv_vports) { DEBUG15(printk ("vp_id %d is bigger than max-supported %d.\n", vp_id, ha->max_npiv_vports)); - up(&ha->vport_sem); + mutex_unlock(&ha->vport_lock); return vp_id; } @@ -45,7 +45,7 @@ qla24xx_allocate_vp_id(scsi_qla_host_t *vha) ha->num_vhosts++; vha->vp_idx = vp_id; list_add_tail(&vha->vp_list, &ha->vp_list); - up(&ha->vport_sem); + mutex_unlock(&ha->vport_lock); return vp_id; } @@ -55,12 +55,12 @@ qla24xx_deallocate_vp_id(scsi_qla_host_t *vha) uint16_t vp_id; scsi_qla_host_t *ha = vha->parent; - down(&ha->vport_sem); + mutex_lock(&ha->vport_lock); vp_id = vha->vp_idx; ha->num_vhosts--; clear_bit(vp_id, ha->vp_idx_map); list_del(&vha->vp_list); - up(&ha->vport_sem); + mutex_unlock(&ha->vport_lock); } static scsi_qla_host_t * @@ -145,9 +145,9 @@ qla24xx_enable_vp(scsi_qla_host_t *vha) } /* Initialize the new vport unless it is a persistent port */ - down(&ha->vport_sem); + mutex_lock(&ha->vport_lock); ret = qla24xx_modify_vp_config(vha); - up(&ha->vport_sem); + mutex_unlock(&ha->vport_lock); if (ret != QLA_SUCCESS) { fc_vport_set_state(vha->fc_vport, FC_VPORT_FAILED); @@ -437,10 +437,10 @@ qla24xx_create_vhost(struct fc_vport *fc_vport) vha->flags.init_done = 1; num_hosts++; - down(&ha->vport_sem); + mutex_lock(&ha->vport_lock); set_bit(vha->vp_idx, ha->vp_idx_map); ha->cur_vport_count++; - up(&ha->vport_sem); + mutex_unlock(&ha->vport_lock); return vha; diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 9982ecd9c61..817f62fbdd8 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1632,7 +1632,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) /* load the F/W, read paramaters, and init the H/W */ ha->instance = num_hosts; - init_MUTEX(&ha->vport_sem); + mutex_init(&ha->vport_lock); init_completion(&ha->mbx_cmd_comp); complete(&ha->mbx_cmd_comp); init_completion(&ha->mbx_intr_comp); -- cgit v1.2.3 From fa0926df0f5cf63b998a79127519bdcfe9bf05f7 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Mon, 12 May 2008 22:21:12 -0700 Subject: [SCSI] qla2xxx: Don't depend on mailbox return values while enabling FCE tracing. Recent firmwares no longer return the 'number of buffers' in mailbox6. The original code may result in a potential panic during a FW-dump process due to the driver misinterpreting the size of the allocated buffer. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_mbx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 3800876f96c..bf3a6f0b8ba 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -2508,7 +2508,7 @@ qla2x00_enable_fce_trace(scsi_qla_host_t *ha, dma_addr_t fce_dma, if (mb) memcpy(mb, mcp->mb, 8 * sizeof(*mb)); if (dwords) - *dwords = mcp->mb[6]; + *dwords = buffers; } return rval; -- cgit v1.2.3 From 68af081151670af4ca405823f9dfb74ec6b20e66 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Mon, 12 May 2008 22:21:13 -0700 Subject: [SCSI] qla2xxx: Extend the 'fw_dump' SYSFS node the ability to initiate a firmware dump. The user-initiated dump can be a useful tool in triaging complex ISP and FC issues. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_attr.c | 3 +++ drivers/scsi/qla2xxx/qla_gbl.h | 3 +++ drivers/scsi/qla2xxx/qla_mbx.c | 6 +----- 3 files changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 48318d0f088..8dd88fc1244 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -70,6 +70,9 @@ qla2x00_sysfs_write_fw_dump(struct kobject *kobj, case 2: qla2x00_alloc_fw_dump(ha); break; + case 3: + qla2x00_system_error(ha); + break; } return (count); } diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index f8827068d30..9b4bebee687 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -227,6 +227,9 @@ extern int qla24xx_abort_command(scsi_qla_host_t *, srb_t *); extern int qla24xx_abort_target(struct fc_port *, unsigned int); extern int qla24xx_lun_reset(struct fc_port *, unsigned int); +extern int +qla2x00_system_error(scsi_qla_host_t *); + extern int qla2x00_set_serdes_params(scsi_qla_host_t *, uint16_t, uint16_t, uint16_t); diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index bf3a6f0b8ba..250d2f60439 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -2303,8 +2303,6 @@ qla24xx_lun_reset(struct fc_port *fcport, unsigned int l) return __qla24xx_issue_tmf("Lun", TCF_LUN_RESET, fcport, l); } -#if 0 - int qla2x00_system_error(scsi_qla_host_t *ha) { @@ -2312,7 +2310,7 @@ qla2x00_system_error(scsi_qla_host_t *ha) mbx_cmd_t mc; mbx_cmd_t *mcp = &mc; - if (!IS_FWI2_CAPABLE(ha)) + if (!IS_QLA23XX(ha) && !IS_FWI2_CAPABLE(ha)) return QLA_FUNCTION_FAILED; DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); @@ -2334,8 +2332,6 @@ qla2x00_system_error(scsi_qla_host_t *ha) return rval; } -#endif /* 0 */ - /** * qla2x00_set_serdes_params() - * @ha: HA context -- cgit v1.2.3 From d2ba5675d8993e669182250e41ad83e7a0b5d4ad Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Mon, 12 May 2008 22:21:14 -0700 Subject: [SCSI] qla2xxx: Disable local-interrupts while polling for RISC status. Matthew Wilcox reported the following lockdep warning: > ================================= > [INFO:inconsistentlockstate] > 2.6.26-rc1-00115-g0340eda-dirty#60 > --------------------------------- > inconsistent{hardirq-on-W}->{in-hardirq-W}usage. > swapper/1[HC1[1]:SC0[0]:HE0:SE1]takes: > (&ha->hardware_lock){+-..},at:[]qla2300_intr_handler+0x35/0x1f5 > {hardirq-on-W}statewasregisteredat: > []__lock_acquire+0x459/0xb1d > []__lock_acquire+0xad4/0xb1d > []lock_acquire+0x68/0x82 > []qla2300_intr_handler+0x35/0x1f5 > []_spin_lock+0x24/0x4d > []qla2300_intr_handler+0x35/0x1f5 > []qla2300_intr_handler+0x35/0x1f5 > []trace_hardirqs_on+0xe7/0x10e > []qla2x00_mailbox_command+0x1c6/0x433 ... > other info that might help us debug this: > no locks held by swapper/1. > > stack backtrace: > Pid:1,comm:swapperNottainted2.6.26-rc1-00115-g0340eda-dirty#60 > []print_usage_bug+0x100/0x10a > []mark_lock+0xaa/0x395 > []__lock_acquire+0x3f2/0xb1d > []__lock_acquire+0xad4/0xb1d > []lock_acquire+0x68/0x82 > []qla2300_intr_handler+0x35/0x1f5 > []_spin_lock+0x24/0x4d > []qla2300_intr_handler+0x35/0x1f5 > []qla2300_intr_handler+0x35/0x1f5 > []handle_IRQ_event+0x13/0x3d > []handle_fasteoi_irq+0x76/0xab Which shows that lockdep is detecting the driver's interrupt-handler is run in both process and interrupt context with irqs-enabled in the former case. During init-time and error-recovery (after a RISC reset), the driver disables interrupts and 'polls' for completions by calling qla2x00_poll(): static inline void qla2x00_poll(scsi_qla_host_t *ha) { ha->isp_ops->intr_handler(0, ha); } which in-turn calls the ISP registered interrupt handler. This patch corrects it by disabling local interrupts during polling. Reviewed-by: Matthew Wilcox Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_inline.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h index e9bae27737d..92fafbdbbaa 100644 --- a/drivers/scsi/qla2xxx/qla_inline.h +++ b/drivers/scsi/qla2xxx/qla_inline.h @@ -34,7 +34,11 @@ qla2x00_debounce_register(volatile uint16_t __iomem *addr) static inline void qla2x00_poll(scsi_qla_host_t *ha) { + unsigned long flags; + + local_irq_save(flags); ha->isp_ops->intr_handler(0, ha); + local_irq_restore(flags); } static __inline__ scsi_qla_host_t * -- cgit v1.2.3 From a7cd02320eeee9992c7eba347555e8970042b68c Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Mon, 12 May 2008 22:21:15 -0700 Subject: [SCSI] qla2xxx: Revert "qla2xxx: Validate mid-layer 'underflow' during check-condition handling." This reverts commit 8084fe168a5252548cdddf2ed181c337fecd0523. The midlayer should be given the oppotunity to interpret the check-condition and based on scsi_cmnd->resid determine if a transfer should be retried or failed. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_isr.c | 19 ------------------- 1 file changed, 19 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 0793aa9f161..14bcd7cc9ae 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -1132,25 +1132,6 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt) break; qla2x00_handle_sense(sp, sense_data, sense_len); - - /* - * In case of a Underrun condition, set both the lscsi - * status and the completion status to appropriate - * values. - */ - if (resid && - ((unsigned)(scsi_bufflen(cp) - resid) < - cp->underflow)) { - DEBUG2(qla_printk(KERN_INFO, ha, - "scsi(%ld:%d:%d:%d): Mid-layer underflow " - "detected (%x of %x bytes)...returning " - "error status.\n", ha->host_no, - cp->device->channel, cp->device->id, - cp->device->lun, resid, - scsi_bufflen(cp))); - - cp->result = DID_ERROR << 16 | lscsi_status; - } } else { /* * If RISC reports underrun and target does not report -- cgit v1.2.3 From 7853099a70742b2a3c753282e5ccfbdda86cb29f Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Mon, 12 May 2008 22:21:16 -0700 Subject: [SCSI] qla2xxx: Update version number to 8.02.01-k3. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index afeae2bfe7e..b42e3f2c7df 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.02.01-k2" +#define QLA2XXX_VERSION "8.02.01-k3" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 2 -- cgit v1.2.3 From cd80ec6f81db89d109187a673470c04af4c09a63 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 15 May 2008 15:28:55 -0700 Subject: IB/ipath: Fix printk format for ipath_sdma_status Commit f018c7e1 ("IB/ipath: Change ipath_devdata.ipath_sdma_status to be unsigned long") changed ipath_sdma_status to be unsigned long, but left a few debug messages that printed it out with a %016llx format, which generates the warnings drivers/infiniband/hw/ipath/ipath_sdma.c:348: warning: format '%016llx' expects type 'long long unsigned int', but argument 3 has type 'long unsigned int' drivers/infiniband/hw/ipath/ipath_sdma.c:618: warning: format '%016llx' expects type 'long long unsigned int', but argument 3 has type 'long unsigned int' Fix this by changing the format used to print out the value to %08lx (8 hex digits are now sufficient, because the highest bit used is 31). Warnings reported by Randy Dunlap . Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_sdma.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/ipath/ipath_sdma.c b/drivers/infiniband/hw/ipath/ipath_sdma.c index 3697449c1ba..0a8c1b8091a 100644 --- a/drivers/infiniband/hw/ipath/ipath_sdma.c +++ b/drivers/infiniband/hw/ipath/ipath_sdma.c @@ -345,7 +345,7 @@ resched: * state change */ if (jiffies > dd->ipath_sdma_abort_jiffies) { - ipath_dbg("looping with status 0x%016llx\n", + ipath_dbg("looping with status 0x%08lx\n", dd->ipath_sdma_status); dd->ipath_sdma_abort_jiffies = jiffies + 5 * HZ; } @@ -615,7 +615,7 @@ void ipath_restart_sdma(struct ipath_devdata *dd) } spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags); if (!needed) { - ipath_dbg("invalid attempt to restart SDMA, status 0x%016llx\n", + ipath_dbg("invalid attempt to restart SDMA, status 0x%08lx\n", dd->ipath_sdma_status); goto bail; } -- cgit v1.2.3 From df3f0da8db6b5e7e8f0585221c8b1cd8ff806d35 Mon Sep 17 00:00:00 2001 From: Ralph Campbell Date: Thu, 15 May 2008 16:37:25 -0700 Subject: IB/ipath: Fix UC receive completion opcode for RDMA WRITE with immediate When I fixed the RC receive completion opcode in 2bfc8e9e ("IB/ipath: Return the correct opcode for RDMA WRITE with immediate"), I forgot to fix UC, which had the same problem for RDMA write with immediate returning the wrong opcode. Signed-off-by: Ralph Campbell Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_uc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/ipath/ipath_uc.c b/drivers/infiniband/hw/ipath/ipath_uc.c index 7fd18e83390..0596ec16fcb 100644 --- a/drivers/infiniband/hw/ipath/ipath_uc.c +++ b/drivers/infiniband/hw/ipath/ipath_uc.c @@ -407,12 +407,11 @@ void ipath_uc_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr, dev->n_pkt_drops++; goto done; } - /* XXX Need to free SGEs */ + wc.opcode = IB_WC_RECV; last_imm: ipath_copy_sge(&qp->r_sge, data, tlen); wc.wr_id = qp->r_wr_id; wc.status = IB_WC_SUCCESS; - wc.opcode = IB_WC_RECV; wc.qp = &qp->ibqp; wc.src_qp = qp->remote_qpn; wc.slid = qp->remote_ah_attr.dlid; @@ -514,6 +513,7 @@ void ipath_uc_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr, goto done; } wc.byte_len = qp->r_len; + wc.opcode = IB_WC_RECV_RDMA_WITH_IMM; goto last_imm; case OP(RDMA_WRITE_LAST): -- cgit v1.2.3 From a3d8e1591dc90d359d444c759dfda2c6fc605251 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 16 May 2008 14:28:30 -0700 Subject: IB/mlx4: Fix uninitialized-var warning in mlx4_ib_post_send() drivers/infiniband/hw/mlx4/qp.c: In function 'mlx4_ib_post_send': drivers/infiniband/hw/mlx4/qp.c:1460: warning: 'seglen' may be used uninitialized in this function This is the dopey gcc-doesn't-know-that-foo(&var)-writes-to-var problem. Signed-off-by: Andrew Morton Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx4/qp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index 8e02ecfec18..cec030e118d 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -1457,7 +1457,7 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, unsigned ind; int uninitialized_var(stamp); int uninitialized_var(size); - unsigned seglen; + unsigned uninitialized_var(seglen); int i; spin_lock_irqsave(&qp->sq.lock, flags); -- cgit v1.2.3 From 21609ae3efa42f4118ce741f7e55d66d716cb17c Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 16 May 2008 14:58:40 -0700 Subject: RDMA/cxgb3: Fix uninitialized variable warning in iwch_post_send() drivers/infiniband/hw/cxgb3/iwch_qp.c: In function 'iwch_post_send': drivers/infiniband/hw/cxgb3/iwch_qp.c:232: warning: 't3_wr_flit_cnt' may be used uninitialized in this function This is what akpm describes as "the dopey gcc-doesn't-know-that-foo(&var)-writes-to-var problem." Signed-off-by: Roland Dreier Acked-by: Steve Wise --- drivers/infiniband/hw/cxgb3/iwch_qp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c index 79dbe5beae5..99261379922 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_qp.c +++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c @@ -229,7 +229,7 @@ int iwch_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, struct ib_send_wr **bad_wr) { int err = 0; - u8 t3_wr_flit_cnt; + u8 uninitialized_var(t3_wr_flit_cnt); enum t3_wr_opcode t3_wr_opcode = 0; enum t3_wr_flags t3_wr_flags; struct iwch_qp *qhp; -- cgit v1.2.3 From 12103dca52e79e23afe2fbcaf3d9e7fc9ceb6b18 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 16 May 2008 14:58:44 -0700 Subject: IB/mthca: Fix max_sge value returned by query_device The mthca driver returns the maximum number of scatter/gather entries returned by the firmware as the max_sge value when device properties are queried. However, the firmware also reports a limit on the maximum descriptor size allowed, and because mthca takes into account the worst case send request overhead when checking whether to allow a QP to be created, the largest number of scatter/gather entries that can be used with mthca may be limited by the maximum descriptor size rather than just by the actual s/g entry limit. This means that applications cannot actually create QPs with max_send_sge equal to the limit returned by ib_query_device(). Fix this by checking if the maximum descriptor size imposes a lower limit and if so returning that lower limit. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_main.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c index 9ebadd6e0cf..200cf13fc9b 100644 --- a/drivers/infiniband/hw/mthca/mthca_main.c +++ b/drivers/infiniband/hw/mthca/mthca_main.c @@ -45,6 +45,7 @@ #include "mthca_cmd.h" #include "mthca_profile.h" #include "mthca_memfree.h" +#include "mthca_wqe.h" MODULE_AUTHOR("Roland Dreier"); MODULE_DESCRIPTION("Mellanox InfiniBand HCA low-level driver"); @@ -200,7 +201,18 @@ static int mthca_dev_lim(struct mthca_dev *mdev, struct mthca_dev_lim *dev_lim) mdev->limits.gid_table_len = dev_lim->max_gids; mdev->limits.pkey_table_len = dev_lim->max_pkeys; mdev->limits.local_ca_ack_delay = dev_lim->local_ca_ack_delay; - mdev->limits.max_sg = dev_lim->max_sg; + /* + * Need to allow for worst case send WQE overhead and check + * whether max_desc_sz imposes a lower limit than max_sg; UD + * send has the biggest overhead. + */ + mdev->limits.max_sg = min_t(int, dev_lim->max_sg, + (dev_lim->max_desc_sz - + sizeof (struct mthca_next_seg) - + (mthca_is_memfree(mdev) ? + sizeof (struct mthca_arbel_ud_seg) : + sizeof (struct mthca_tavor_ud_seg))) / + sizeof (struct mthca_data_seg)); mdev->limits.max_wqes = dev_lim->max_qp_sz; mdev->limits.max_qp_init_rdma = dev_lim->max_requester_per_qp; mdev->limits.reserved_qps = dev_lim->reserved_qps; -- cgit v1.2.3 From 65e660aa3f76b120c2fe69bf07e1b416dae404a7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bruno=20Pr=C3=A9mont?= Date: Tue, 20 May 2008 13:47:28 -0400 Subject: Input: i8042 - add Dritek quirk for Acer TravelMate 660 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Acer TravelMate 660 series also requires the Dritek quirk to enable the extra scancodes. Signed-off-by: Bruno PrĂ©mont Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042-x86ia64io.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 5ece9f56bab..9aafa96cb74 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -330,6 +330,13 @@ static struct dmi_system_id __initdata i8042_dmi_dritek_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 9110"), }, }, + { + .ident = "Acer TravelMate 660", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 660"), + }, + }, { .ident = "Acer TravelMate 2490", .matches = { -- cgit v1.2.3 From cd155c1c7c9e64df6afb5504d292fef7cb783a4f Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 20 May 2008 14:00:02 -0700 Subject: IB/mlx4: Fix creation of kernel QP with max number of send s/g entries When creating a kernel QP where the consumer asked for a send queue with lots of scatter/gater entries, set_kernel_sq_size() incorrectly returned an error if the send queue stride is larger than the hardware's maximum send work request descriptor size. This is not a problem; the only issue is to make sure that the actual descriptors used do not overflow the maximum descriptor size, so check this instead. Clamp the returned max_send_sge value to be no bigger than what query_device returns for the max_sge to avoid confusing hapless users, even if the hardware is capable of handling a few more s/g entries. This bug caused NFS/RDMA mounts to fail when the server adapter used the mlx4 driver. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx4/qp.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index cec030e118d..a80df22deae 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -333,6 +333,9 @@ static int set_kernel_sq_size(struct mlx4_ib_dev *dev, struct ib_qp_cap *cap, cap->max_inline_data + sizeof (struct mlx4_wqe_inline_seg)) + send_wqe_overhead(type, qp->flags); + if (s > dev->dev->caps.max_sq_desc_sz) + return -EINVAL; + /* * Hermon supports shrinking WQEs, such that a single work * request can include multiple units of 1 << wqe_shift. This @@ -372,9 +375,6 @@ static int set_kernel_sq_size(struct mlx4_ib_dev *dev, struct ib_qp_cap *cap, qp->sq.wqe_shift = ilog2(roundup_pow_of_two(s)); for (;;) { - if (1 << qp->sq.wqe_shift > dev->dev->caps.max_sq_desc_sz) - return -EINVAL; - qp->sq_max_wqes_per_wr = DIV_ROUND_UP(s, 1U << qp->sq.wqe_shift); /* @@ -395,7 +395,8 @@ static int set_kernel_sq_size(struct mlx4_ib_dev *dev, struct ib_qp_cap *cap, ++qp->sq.wqe_shift; } - qp->sq.max_gs = ((qp->sq_max_wqes_per_wr << qp->sq.wqe_shift) - + qp->sq.max_gs = (min(dev->dev->caps.max_sq_desc_sz, + (qp->sq_max_wqes_per_wr << qp->sq.wqe_shift)) - send_wqe_overhead(type, qp->flags)) / sizeof (struct mlx4_wqe_data_seg); @@ -411,7 +412,9 @@ static int set_kernel_sq_size(struct mlx4_ib_dev *dev, struct ib_qp_cap *cap, cap->max_send_wr = qp->sq.max_post = (qp->sq.wqe_cnt - qp->sq_spare_wqes) / qp->sq_max_wqes_per_wr; - cap->max_send_sge = qp->sq.max_gs; + cap->max_send_sge = min(qp->sq.max_gs, + min(dev->dev->caps.max_sq_sg, + dev->dev->caps.max_rq_sg)); /* We don't support inline sends for kernel QPs (yet) */ cap->max_inline_data = 0; -- cgit v1.2.3 From e1d50dce5af77cb6d33555af70e2b8748dd84009 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Tue, 20 May 2008 15:41:09 -0700 Subject: IPoIB: Test for NULL broadcast object in ipiob_mcast_join_finish() We saw a kernel oops in our regression testing when a multicast "join finish" occurred just after the interface was -- this is . The test randomly causes the HCA physical port to go down then up. The cause of this is that ipoib_mcast_join_finish() processing happen just after ipoib_mcast_dev_flush() was invoked (in which case the broadcast pointer is NULL). This patch tests for and handles the case where priv->broadcast is NULL. Cc: Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index d00a2c174ae..3f663fb852c 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -194,7 +194,13 @@ static int ipoib_mcast_join_finish(struct ipoib_mcast *mcast, /* Set the cached Q_Key before we attach if it's the broadcast group */ if (!memcmp(mcast->mcmember.mgid.raw, priv->dev->broadcast + 4, sizeof (union ib_gid))) { + spin_lock_irq(&priv->lock); + if (!priv->broadcast) { + spin_unlock_irq(&priv->lock); + return -EAGAIN; + } priv->qkey = be32_to_cpu(priv->broadcast->mcmember.qkey); + spin_unlock_irq(&priv->lock); priv->tx_wr.wr.ud.remote_qkey = priv->qkey; } -- cgit v1.2.3 From ddc9753fcddfe5f9885dc133824962c047252b43 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Wed, 21 May 2008 16:58:40 +0800 Subject: PCI: don't enable ASPM on devices with mixed PCIe/PCI functions The Slot 03:00.* of JMicron controller has two functions, but one is PCIE endpoint the other isn't PCIE device, very strange. PCIE spec defines all functions should have the same config for ASPM, so disable ASPM for the whole slot in this case. Signed-off-by: Shaohua Li Signed-off-by: Jesse Barnes --- drivers/pci/pcie/aspm.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 61fedb2448b..f82495583e6 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -506,6 +506,23 @@ static void free_link_state(struct pci_dev *pdev) pdev->link_state = NULL; } +static int pcie_aspm_sanity_check(struct pci_dev *pdev) +{ + struct pci_dev *child_dev; + int child_pos; + + /* + * Some functions in a slot might not all be PCIE functions, very + * strange. Disable ASPM for the whole slot + */ + list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) { + child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP); + if (!child_pos) + return -EINVAL; + } + return 0; +} + /* * pcie_aspm_init_link_state: Initiate PCI express link state. * It is called after the pcie and its children devices are scaned. @@ -526,6 +543,9 @@ void pcie_aspm_init_link_state(struct pci_dev *pdev) if (list_empty(&pdev->subordinate->devices)) goto out; + if (pcie_aspm_sanity_check(pdev)) + goto out; + mutex_lock(&aspm_lock); link_state = kzalloc(sizeof(*link_state), GFP_KERNEL); -- cgit v1.2.3 From 4cc58bdebfcb7561de401999705a5cde16674842 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 16 May 2008 21:13:57 +0100 Subject: sfc: Use mod_timer() to set expiry and add_timer() together Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik --- drivers/net/sfc/boards.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sfc/boards.c b/drivers/net/sfc/boards.c index eecaa6d5858..7fc0328dc05 100644 --- a/drivers/net/sfc/boards.c +++ b/drivers/net/sfc/boards.c @@ -27,10 +27,8 @@ static void blink_led_timer(unsigned long context) struct efx_blinker *bl = &efx->board_info.blinker; efx->board_info.set_fault_led(efx, bl->state); bl->state = !bl->state; - if (bl->resubmit) { - bl->timer.expires = jiffies + BLINK_INTERVAL; - add_timer(&bl->timer); - } + if (bl->resubmit) + mod_timer(&bl->timer, jiffies + BLINK_INTERVAL); } static void board_blink(struct efx_nic *efx, int blink) @@ -44,8 +42,7 @@ static void board_blink(struct efx_nic *efx, int blink) blinker->state = 0; setup_timer(&blinker->timer, blink_led_timer, (unsigned long)efx); - blinker->timer.expires = jiffies + BLINK_INTERVAL; - add_timer(&blinker->timer); + mod_timer(&blinker->timer, jiffies + BLINK_INTERVAL); } else { blinker->resubmit = 0; if (blinker->timer.function) -- cgit v1.2.3 From 91ad757c2fc35ec79dd2c909dc6dc721b9c257f3 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 16 May 2008 21:14:27 +0100 Subject: sfc: Removed casts to void Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik --- drivers/net/sfc/efx.c | 4 ++-- drivers/net/sfc/falcon.c | 2 +- drivers/net/sfc/falcon_xmac.c | 4 ++-- drivers/net/sfc/sfe4001.c | 14 +++++++------- drivers/net/sfc/tenxpress.c | 2 +- 5 files changed, 13 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index 418f2e53a95..48aae4702ba 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -265,7 +265,7 @@ void efx_process_channel_now(struct efx_channel *channel) napi_disable(&channel->napi_str); /* Poll the channel */ - (void) efx_process_channel(channel, efx->type->evq_size); + efx_process_channel(channel, efx->type->evq_size); /* Ack the eventq. This may cause an interrupt to be generated * when they are reenabled */ @@ -1688,7 +1688,7 @@ static int efx_reset(struct efx_nic *efx) if (method == RESET_TYPE_DISABLE) { /* Reinitialise the device anyway so the driver unload sequence * can talk to the external SRAM */ - (void) falcon_init_nic(efx); + falcon_init_nic(efx); rc = -EIO; goto fail4; } diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index b57cc68058c..c58f8a3443c 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -2647,7 +2647,7 @@ void falcon_remove_nic(struct efx_nic *efx) falcon_free_buffer(efx, &efx->irq_status); - (void) falcon_reset_hw(efx, RESET_TYPE_ALL); + falcon_reset_hw(efx, RESET_TYPE_ALL); /* Release the second function after the reset */ if (nic_data->pci_dev2) { diff --git a/drivers/net/sfc/falcon_xmac.c b/drivers/net/sfc/falcon_xmac.c index a74b7931a3c..d2978d4d3bf 100644 --- a/drivers/net/sfc/falcon_xmac.c +++ b/drivers/net/sfc/falcon_xmac.c @@ -454,7 +454,7 @@ static int falcon_check_xaui_link_up(struct efx_nic *efx) EFX_LOG(efx, "%s Clobbering XAUI (%d tries left).\n", __func__, tries); - (void) falcon_reset_xaui(efx); + falcon_reset_xaui(efx); udelay(200); tries--; } @@ -572,7 +572,7 @@ int falcon_check_xmac(struct efx_nic *efx) xaui_link_ok = falcon_xaui_link_ok(efx); if (EFX_WORKAROUND_5147(efx) && !xaui_link_ok) - (void) falcon_reset_xaui(efx); + falcon_reset_xaui(efx); /* Call the PHY check_hw routine */ rc = efx->phy_op->check_hw(efx); diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c index 725d1a539c4..66a0d1442ab 100644 --- a/drivers/net/sfc/sfe4001.c +++ b/drivers/net/sfc/sfe4001.c @@ -116,18 +116,18 @@ void sfe4001_poweroff(struct efx_nic *efx) /* Turn off all power rails */ out = 0xff; - (void) efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1); + efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1); /* Disable port 1 outputs on IO expander */ cfg = 0xff; - (void) efx_i2c_write(i2c, PCA9539, P1_CONFIG, &cfg, 1); + efx_i2c_write(i2c, PCA9539, P1_CONFIG, &cfg, 1); /* Disable port 0 outputs on IO expander */ cfg = 0xff; - (void) efx_i2c_write(i2c, PCA9539, P0_CONFIG, &cfg, 1); + efx_i2c_write(i2c, PCA9539, P0_CONFIG, &cfg, 1); /* Clear any over-temperature alert */ - (void) efx_i2c_read(i2c, MAX6647, RSL, &in, 1); + efx_i2c_read(i2c, MAX6647, RSL, &in, 1); } /* The P0_EN_3V3X line on SFE4001 boards (from A2 onward) is connected @@ -253,14 +253,14 @@ done: fail3: /* Turn off all power rails */ out = 0xff; - (void) efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1); + efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1); /* Disable port 1 outputs on IO expander */ out = 0xff; - (void) efx_i2c_write(i2c, PCA9539, P1_CONFIG, &out, 1); + efx_i2c_write(i2c, PCA9539, P1_CONFIG, &out, 1); fail2: /* Disable port 0 outputs on IO expander */ out = 0xff; - (void) efx_i2c_write(i2c, PCA9539, P0_CONFIG, &out, 1); + efx_i2c_write(i2c, PCA9539, P0_CONFIG, &out, 1); fail1: return rc; } diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c index b1cd6deec01..38e96ed33d3 100644 --- a/drivers/net/sfc/tenxpress.c +++ b/drivers/net/sfc/tenxpress.c @@ -376,7 +376,7 @@ static void tenxpress_phy_reconfigure(struct efx_nic *efx) * perform a special software reset */ if ((phy_data->tx_disabled && !efx->tx_disabled) || loop_change) { - (void) tenxpress_special_reset(efx); + tenxpress_special_reset(efx); falcon_reset_xaui(efx); } -- cgit v1.2.3 From f7f13b0b9253e21557ad090144a44f20860332f1 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 16 May 2008 21:15:06 +0100 Subject: sfc: Simplified efx_rx_calc_buffer_size() using get_order() Merged it into its only caller, efx_init_channels(). Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik --- drivers/net/sfc/efx.c | 29 ++++++++--------------------- 1 file changed, 8 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index 48aae4702ba..1a065fcadc5 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -317,26 +317,6 @@ static void efx_remove_eventq(struct efx_channel *channel) * *************************************************************************/ -/* Setup per-NIC RX buffer parameters. - * Calculate the rx buffer allocation parameters required to support - * the current MTU, including padding for header alignment and overruns. - */ -static void efx_calc_rx_buffer_params(struct efx_nic *efx) -{ - unsigned int order, len; - - len = (max(EFX_PAGE_IP_ALIGN, NET_IP_ALIGN) + - EFX_MAX_FRAME_LEN(efx->net_dev->mtu) + - efx->type->rx_buffer_padding); - - /* Calculate page-order */ - for (order = 0; ((1u << order) * PAGE_SIZE) < len; ++order) - ; - - efx->rx_buffer_len = len; - efx->rx_buffer_order = order; -} - static int efx_probe_channel(struct efx_channel *channel) { struct efx_tx_queue *tx_queue; @@ -387,7 +367,14 @@ static int efx_init_channels(struct efx_nic *efx) struct efx_channel *channel; int rc = 0; - efx_calc_rx_buffer_params(efx); + /* Calculate the rx buffer allocation parameters required to + * support the current MTU, including padding for header + * alignment and overruns. + */ + efx->rx_buffer_len = (max(EFX_PAGE_IP_ALIGN, NET_IP_ALIGN) + + EFX_MAX_FRAME_LEN(efx->net_dev->mtu) + + efx->type->rx_buffer_padding); + efx->rx_buffer_order = get_order(efx->rx_buffer_len); /* Initialise the channels */ efx_for_each_channel(channel, efx) { -- cgit v1.2.3 From 2c118e0f6b7f3b8021df3c80c80c0545402f38b4 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 16 May 2008 21:15:29 +0100 Subject: sfc: Removed unncesssary UL suffixes on 0 literals Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik --- drivers/net/sfc/efx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index 1a065fcadc5..3494f4cd314 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -793,7 +793,7 @@ static int efx_init_io(struct efx_nic *efx) fail4: release_mem_region(efx->membase_phys, efx->type->mem_map_size); fail3: - efx->membase_phys = 0UL; + efx->membase_phys = 0; fail2: pci_disable_device(efx->pci_dev); fail1: @@ -811,7 +811,7 @@ static void efx_fini_io(struct efx_nic *efx) if (efx->membase_phys) { pci_release_region(efx->pci_dev, efx->type->mem_bar); - efx->membase_phys = 0UL; + efx->membase_phys = 0; } pci_disable_device(efx->pci_dev); -- cgit v1.2.3 From b3475645ed8b823c063f7560b243026150d7c3f8 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 16 May 2008 21:15:49 +0100 Subject: sfc: Added and removed braces to comply with kernel style Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik --- drivers/net/sfc/efx.c | 6 +++--- drivers/net/sfc/falcon.c | 3 ++- drivers/net/sfc/rx.c | 3 ++- drivers/net/sfc/tx.c | 9 ++++++--- 4 files changed, 13 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index 3494f4cd314..df19e86ab2e 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -1060,9 +1060,8 @@ static void efx_flush_all(struct efx_nic *efx) cancel_delayed_work_sync(&efx->monitor_work); /* Ensure that all RX slow refills are complete. */ - efx_for_each_rx_queue(rx_queue, efx) { + efx_for_each_rx_queue(rx_queue, efx) cancel_delayed_work_sync(&rx_queue->work); - } /* Stop scheduled port reconfigurations */ cancel_work_sync(&efx->reconfigure_work); @@ -1088,9 +1087,10 @@ static void efx_stop_all(struct efx_nic *efx) falcon_disable_interrupts(efx); if (efx->legacy_irq) synchronize_irq(efx->legacy_irq); - efx_for_each_channel_with_interrupt(channel, efx) + efx_for_each_channel_with_interrupt(channel, efx) { if (channel->irq) synchronize_irq(channel->irq); + } /* Stop all NAPI processing and synchronous rx refills */ efx_for_each_channel(channel, efx) diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index c58f8a3443c..4f96ce4c353 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -1636,9 +1636,10 @@ void falcon_fini_interrupt(struct efx_nic *efx) efx_oword_t reg; /* Disable MSI/MSI-X interrupts */ - efx_for_each_channel_with_interrupt(channel, efx) + efx_for_each_channel_with_interrupt(channel, efx) { if (channel->irq) free_irq(channel->irq, channel); + } /* ACK legacy interrupt */ if (FALCON_REV(efx) >= FALCON_REV_B0) diff --git a/drivers/net/sfc/rx.c b/drivers/net/sfc/rx.c index 670622373dd..a6413309c57 100644 --- a/drivers/net/sfc/rx.c +++ b/drivers/net/sfc/rx.c @@ -400,9 +400,10 @@ static int __efx_fast_push_rx_descriptors(struct efx_rx_queue *rx_queue, return 0; /* Record minimum fill level */ - if (unlikely(fill_level < rx_queue->min_fill)) + if (unlikely(fill_level < rx_queue->min_fill)) { if (fill_level) rx_queue->min_fill = fill_level; + } /* Acquire RX add lock. If this lock is contended, then a fast * fill must already be in progress (e.g. in the refill diff --git a/drivers/net/sfc/tx.c b/drivers/net/sfc/tx.c index 9b436f5b488..75eb0fd5fd2 100644 --- a/drivers/net/sfc/tx.c +++ b/drivers/net/sfc/tx.c @@ -639,11 +639,12 @@ static void efx_tsoh_block_free(struct efx_tx_queue *tx_queue, base_dma = tsoh->dma_addr & PAGE_MASK; p = &tx_queue->tso_headers_free; - while (*p != NULL) + while (*p != NULL) { if (((unsigned long)*p & PAGE_MASK) == base_kva) *p = (*p)->next; else p = &(*p)->next; + } pci_free_consistent(pci_dev, PAGE_SIZE, (void *)base_kva, base_dma); } @@ -939,9 +940,10 @@ static inline int tso_start_new_packet(struct efx_tx_queue *tx_queue, /* Allocate a DMA-mapped header buffer. */ if (likely(TSOH_SIZE(st->p.header_length) <= TSOH_STD_SIZE)) { - if (tx_queue->tso_headers_free == NULL) + if (tx_queue->tso_headers_free == NULL) { if (efx_tsoh_block_alloc(tx_queue)) return -1; + } EFX_BUG_ON_PARANOID(!tx_queue->tso_headers_free); tsoh = tx_queue->tso_headers_free; tx_queue->tso_headers_free = tsoh->next; @@ -1106,9 +1108,10 @@ static void efx_fini_tso(struct efx_tx_queue *tx_queue) { unsigned i; - if (tx_queue->buffer) + if (tx_queue->buffer) { for (i = 0; i <= tx_queue->efx->type->txd_ring_mask; ++i) efx_tsoh_free(tx_queue, &tx_queue->buffer[i]); + } while (tx_queue->tso_headers_free != NULL) efx_tsoh_block_free(tx_queue, tx_queue->tso_headers_free, -- cgit v1.2.3 From 55668611d0b2a5947cd17f66243be3cebf21400c Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 16 May 2008 21:16:10 +0100 Subject: sfc: Replaced various macros with inline functions Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik --- drivers/net/sfc/bitfield.h | 4 ++-- drivers/net/sfc/efx.c | 8 ++++---- drivers/net/sfc/falcon.c | 46 +++++++++++++++++++++---------------------- drivers/net/sfc/falcon.h | 5 ++++- drivers/net/sfc/falcon_io.h | 29 +++++++++++++++++++-------- drivers/net/sfc/falcon_xmac.c | 6 +++--- drivers/net/sfc/net_driver.h | 31 +++++++++++++++++------------ drivers/net/sfc/rx.c | 39 ++++++++++++++++++++++-------------- drivers/net/sfc/selftest.c | 8 ++++---- drivers/net/sfc/tx.c | 2 +- drivers/net/sfc/workarounds.h | 2 +- 11 files changed, 105 insertions(+), 75 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sfc/bitfield.h b/drivers/net/sfc/bitfield.h index 2806201644c..c98a591bd80 100644 --- a/drivers/net/sfc/bitfield.h +++ b/drivers/net/sfc/bitfield.h @@ -483,7 +483,7 @@ typedef union efx_oword { #endif #define EFX_SET_OWORD_FIELD_VER(efx, oword, field, value) do { \ - if (FALCON_REV(efx) >= FALCON_REV_B0) { \ + if (falcon_rev(efx) >= FALCON_REV_B0) { \ EFX_SET_OWORD_FIELD((oword), field##_B0, (value)); \ } else { \ EFX_SET_OWORD_FIELD((oword), field##_A1, (value)); \ @@ -491,7 +491,7 @@ typedef union efx_oword { } while (0) #define EFX_QWORD_FIELD_VER(efx, qword, field) \ - (FALCON_REV(efx) >= FALCON_REV_B0 ? \ + (falcon_rev(efx) >= FALCON_REV_B0 ? \ EFX_QWORD_FIELD((qword), field##_B0) : \ EFX_QWORD_FIELD((qword), field##_A1)) diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index df19e86ab2e..86d40295a77 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -691,7 +691,7 @@ static void efx_stop_port(struct efx_nic *efx) mutex_unlock(&efx->mac_lock); /* Serialise against efx_set_multicast_list() */ - if (NET_DEV_REGISTERED(efx)) { + if (efx_dev_registered(efx)) { netif_tx_lock_bh(efx->net_dev); netif_tx_unlock_bh(efx->net_dev); } @@ -1030,7 +1030,7 @@ static void efx_start_all(struct efx_nic *efx) return; if ((efx->state != STATE_RUNNING) && (efx->state != STATE_INIT)) return; - if (NET_DEV_REGISTERED(efx) && !netif_running(efx->net_dev)) + if (efx_dev_registered(efx) && !netif_running(efx->net_dev)) return; /* Mark the port as enabled so port reconfigurations can start, then @@ -1112,7 +1112,7 @@ static void efx_stop_all(struct efx_nic *efx) /* Stop the kernel transmit interface late, so the watchdog * timer isn't ticking over the flush */ efx_stop_queue(efx); - if (NET_DEV_REGISTERED(efx)) { + if (efx_dev_registered(efx)) { netif_tx_lock_bh(efx->net_dev); netif_tx_unlock_bh(efx->net_dev); } @@ -1550,7 +1550,7 @@ static void efx_unregister_netdev(struct efx_nic *efx) efx_for_each_tx_queue(tx_queue, efx) efx_release_tx_buffers(tx_queue); - if (NET_DEV_REGISTERED(efx)) { + if (efx_dev_registered(efx)) { strlcpy(efx->name, pci_name(efx->pci_dev), sizeof(efx->name)); unregister_netdev(efx->net_dev); } diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index 4f96ce4c353..e02f1d1728a 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -145,7 +145,7 @@ MODULE_PARM_DESC(rx_xon_thresh_bytes, "RX fifo XON threshold"); #define PCI_EXP_LNKSTA_LNK_WID_LBN 4 #define FALCON_IS_DUAL_FUNC(efx) \ - (FALCON_REV(efx) < FALCON_REV_B0) + (falcon_rev(efx) < FALCON_REV_B0) /************************************************************************** * @@ -465,7 +465,7 @@ int falcon_init_tx(struct efx_tx_queue *tx_queue) TX_DESCQ_TYPE, 0, TX_NON_IP_DROP_DIS_B0, 1); - if (FALCON_REV(efx) >= FALCON_REV_B0) { + if (falcon_rev(efx) >= FALCON_REV_B0) { int csum = !(efx->net_dev->features & NETIF_F_IP_CSUM); EFX_SET_OWORD_FIELD(tx_desc_ptr, TX_IP_CHKSM_DIS_B0, csum); EFX_SET_OWORD_FIELD(tx_desc_ptr, TX_TCP_CHKSM_DIS_B0, csum); @@ -474,7 +474,7 @@ int falcon_init_tx(struct efx_tx_queue *tx_queue) falcon_write_table(efx, &tx_desc_ptr, efx->type->txd_ptr_tbl_base, tx_queue->queue); - if (FALCON_REV(efx) < FALCON_REV_B0) { + if (falcon_rev(efx) < FALCON_REV_B0) { efx_oword_t reg; BUG_ON(tx_queue->queue >= 128); /* HW limit */ @@ -635,7 +635,7 @@ int falcon_init_rx(struct efx_rx_queue *rx_queue) efx_oword_t rx_desc_ptr; struct efx_nic *efx = rx_queue->efx; int rc; - int is_b0 = FALCON_REV(efx) >= FALCON_REV_B0; + int is_b0 = falcon_rev(efx) >= FALCON_REV_B0; int iscsi_digest_en = is_b0; EFX_LOG(efx, "RX queue %d ring in special buffers %d-%d\n", @@ -822,10 +822,10 @@ static inline void falcon_handle_tx_event(struct efx_channel *channel, tx_ev_q_label = EFX_QWORD_FIELD(*event, TX_EV_Q_LABEL); tx_queue = &efx->tx_queue[tx_ev_q_label]; - if (NET_DEV_REGISTERED(efx)) + if (efx_dev_registered(efx)) netif_tx_lock(efx->net_dev); falcon_notify_tx_desc(tx_queue); - if (NET_DEV_REGISTERED(efx)) + if (efx_dev_registered(efx)) netif_tx_unlock(efx->net_dev); } else if (EFX_QWORD_FIELD(*event, TX_EV_PKT_ERR) && EFX_WORKAROUND_10727(efx)) { @@ -884,7 +884,7 @@ static void falcon_handle_rx_not_ok(struct efx_rx_queue *rx_queue, RX_EV_TCP_UDP_CHKSUM_ERR); rx_ev_eth_crc_err = EFX_QWORD_FIELD(*event, RX_EV_ETH_CRC_ERR); rx_ev_frm_trunc = EFX_QWORD_FIELD(*event, RX_EV_FRM_TRUNC); - rx_ev_drib_nib = ((FALCON_REV(efx) >= FALCON_REV_B0) ? + rx_ev_drib_nib = ((falcon_rev(efx) >= FALCON_REV_B0) ? 0 : EFX_QWORD_FIELD(*event, RX_EV_DRIB_NIB)); rx_ev_pause_frm = EFX_QWORD_FIELD(*event, RX_EV_PAUSE_FRM_ERR); @@ -1065,7 +1065,7 @@ static void falcon_handle_global_event(struct efx_channel *channel, EFX_QWORD_FIELD(*event, XG_PHY_INTR)) is_phy_event = 1; - if ((FALCON_REV(efx) >= FALCON_REV_B0) && + if ((falcon_rev(efx) >= FALCON_REV_B0) && EFX_OWORD_FIELD(*event, XG_MNT_INTR_B0)) is_phy_event = 1; @@ -1572,7 +1572,7 @@ static void falcon_setup_rss_indir_table(struct efx_nic *efx) unsigned long offset; efx_dword_t dword; - if (FALCON_REV(efx) < FALCON_REV_B0) + if (falcon_rev(efx) < FALCON_REV_B0) return; for (offset = RX_RSS_INDIR_TBL_B0; @@ -1595,7 +1595,7 @@ int falcon_init_interrupt(struct efx_nic *efx) if (!EFX_INT_MODE_USE_MSI(efx)) { irq_handler_t handler; - if (FALCON_REV(efx) >= FALCON_REV_B0) + if (falcon_rev(efx) >= FALCON_REV_B0) handler = falcon_legacy_interrupt_b0; else handler = falcon_legacy_interrupt_a1; @@ -1642,7 +1642,7 @@ void falcon_fini_interrupt(struct efx_nic *efx) } /* ACK legacy interrupt */ - if (FALCON_REV(efx) >= FALCON_REV_B0) + if (falcon_rev(efx) >= FALCON_REV_B0) falcon_read(efx, ®, INT_ISR0_B0); else falcon_irq_ack_a1(efx); @@ -1733,7 +1733,7 @@ void falcon_drain_tx_fifo(struct efx_nic *efx) efx_oword_t temp; int count; - if ((FALCON_REV(efx) < FALCON_REV_B0) || + if ((falcon_rev(efx) < FALCON_REV_B0) || (efx->loopback_mode != LOOPBACK_NONE)) return; @@ -1786,7 +1786,7 @@ void falcon_deconfigure_mac_wrapper(struct efx_nic *efx) { efx_oword_t temp; - if (FALCON_REV(efx) < FALCON_REV_B0) + if (falcon_rev(efx) < FALCON_REV_B0) return; /* Isolate the MAC -> RX */ @@ -1824,7 +1824,7 @@ void falcon_reconfigure_mac_wrapper(struct efx_nic *efx) MAC_SPEED, link_speed); /* On B0, MAC backpressure can be disabled and packets get * discarded. */ - if (FALCON_REV(efx) >= FALCON_REV_B0) { + if (falcon_rev(efx) >= FALCON_REV_B0) { EFX_SET_OWORD_FIELD(reg, TXFIFO_DRAIN_EN_B0, !efx->link_up); } @@ -1842,7 +1842,7 @@ void falcon_reconfigure_mac_wrapper(struct efx_nic *efx) EFX_SET_OWORD_FIELD_VER(efx, reg, RX_XOFF_MAC_EN, tx_fc); /* Unisolate the MAC -> RX */ - if (FALCON_REV(efx) >= FALCON_REV_B0) + if (falcon_rev(efx) >= FALCON_REV_B0) EFX_SET_OWORD_FIELD(reg, RX_INGR_EN_B0, 1); falcon_write(efx, ®, RX_CFG_REG_KER); } @@ -1857,7 +1857,7 @@ int falcon_dma_stats(struct efx_nic *efx, unsigned int done_offset) return 0; /* Statistics fetch will fail if the MAC is in TX drain */ - if (FALCON_REV(efx) >= FALCON_REV_B0) { + if (falcon_rev(efx) >= FALCON_REV_B0) { efx_oword_t temp; falcon_read(efx, &temp, MAC0_CTRL_REG_KER); if (EFX_OWORD_FIELD(temp, TXFIFO_DRAIN_EN_B0)) @@ -2114,7 +2114,7 @@ int falcon_probe_port(struct efx_nic *efx) falcon_init_mdio(&efx->mii); /* Hardware flow ctrl. FalconA RX FIFO too small for pause generation */ - if (FALCON_REV(efx) >= FALCON_REV_B0) + if (falcon_rev(efx) >= FALCON_REV_B0) efx->flow_control = EFX_FC_RX | EFX_FC_TX; else efx->flow_control = EFX_FC_RX; @@ -2374,7 +2374,7 @@ static int falcon_probe_nic_variant(struct efx_nic *efx) return -ENODEV; } - switch (FALCON_REV(efx)) { + switch (falcon_rev(efx)) { case FALCON_REV_A0: case 0xff: EFX_ERR(efx, "Falcon rev A0 not supported\n"); @@ -2400,7 +2400,7 @@ static int falcon_probe_nic_variant(struct efx_nic *efx) break; default: - EFX_ERR(efx, "Unknown Falcon rev %d\n", FALCON_REV(efx)); + EFX_ERR(efx, "Unknown Falcon rev %d\n", falcon_rev(efx)); return -ENODEV; } @@ -2563,7 +2563,7 @@ int falcon_init_nic(struct efx_nic *efx) /* Set number of RSS queues for receive path. */ falcon_read(efx, &temp, RX_FILTER_CTL_REG); - if (FALCON_REV(efx) >= FALCON_REV_B0) + if (falcon_rev(efx) >= FALCON_REV_B0) EFX_SET_OWORD_FIELD(temp, NUM_KER, 0); else EFX_SET_OWORD_FIELD(temp, NUM_KER, efx->rss_queues - 1); @@ -2601,7 +2601,7 @@ int falcon_init_nic(struct efx_nic *efx) /* Prefetch threshold 2 => fetch when descriptor cache half empty */ EFX_SET_OWORD_FIELD(temp, TX_PREF_THRESHOLD, 2); /* Squash TX of packets of 16 bytes or less */ - if (FALCON_REV(efx) >= FALCON_REV_B0 && EFX_WORKAROUND_9141(efx)) + if (falcon_rev(efx) >= FALCON_REV_B0 && EFX_WORKAROUND_9141(efx)) EFX_SET_OWORD_FIELD(temp, TX_FLUSH_MIN_LEN_EN_B0, 1); falcon_write(efx, &temp, TX_CFG2_REG_KER); @@ -2618,7 +2618,7 @@ int falcon_init_nic(struct efx_nic *efx) if (EFX_WORKAROUND_7575(efx)) EFX_SET_OWORD_FIELD_VER(efx, temp, RX_USR_BUF_SIZE, (3 * 4096) / 32); - if (FALCON_REV(efx) >= FALCON_REV_B0) + if (falcon_rev(efx) >= FALCON_REV_B0) EFX_SET_OWORD_FIELD(temp, RX_INGR_EN_B0, 1); /* RX FIFO flow control thresholds */ @@ -2634,7 +2634,7 @@ int falcon_init_nic(struct efx_nic *efx) falcon_write(efx, &temp, RX_CFG_REG_KER); /* Set destination of both TX and RX Flush events */ - if (FALCON_REV(efx) >= FALCON_REV_B0) { + if (falcon_rev(efx) >= FALCON_REV_B0) { EFX_POPULATE_OWORD_1(temp, FLS_EVQ_ID, 0); falcon_write(efx, &temp, DP_CTRL_REG); } diff --git a/drivers/net/sfc/falcon.h b/drivers/net/sfc/falcon.h index 6117403b0c0..492f9bc2884 100644 --- a/drivers/net/sfc/falcon.h +++ b/drivers/net/sfc/falcon.h @@ -23,7 +23,10 @@ enum falcon_revision { FALCON_REV_B0 = 2, }; -#define FALCON_REV(efx) ((efx)->pci_dev->revision) +static inline int falcon_rev(struct efx_nic *efx) +{ + return efx->pci_dev->revision; +} extern struct efx_nic_type falcon_a_nic_type; extern struct efx_nic_type falcon_b_nic_type; diff --git a/drivers/net/sfc/falcon_io.h b/drivers/net/sfc/falcon_io.h index ea08184ddfa..6670cdfc41a 100644 --- a/drivers/net/sfc/falcon_io.h +++ b/drivers/net/sfc/falcon_io.h @@ -56,14 +56,27 @@ #define FALCON_USE_QWORD_IO 1 #endif -#define _falcon_writeq(efx, value, reg) \ - __raw_writeq((__force u64) (value), (efx)->membase + (reg)) -#define _falcon_writel(efx, value, reg) \ - __raw_writel((__force u32) (value), (efx)->membase + (reg)) -#define _falcon_readq(efx, reg) \ - ((__force __le64) __raw_readq((efx)->membase + (reg))) -#define _falcon_readl(efx, reg) \ - ((__force __le32) __raw_readl((efx)->membase + (reg))) +#ifdef FALCON_USE_QWORD_IO +static inline void _falcon_writeq(struct efx_nic *efx, __le64 value, + unsigned int reg) +{ + __raw_writeq((__force u64)value, efx->membase + reg); +} +static inline __le64 _falcon_readq(struct efx_nic *efx, unsigned int reg) +{ + return (__force __le64)__raw_readq(efx->membase + reg); +} +#endif + +static inline void _falcon_writel(struct efx_nic *efx, __le32 value, + unsigned int reg) +{ + __raw_writel((__force u32)value, efx->membase + reg); +} +static inline __le32 _falcon_readl(struct efx_nic *efx, unsigned int reg) +{ + return (__force __le32)__raw_readl(efx->membase + reg); +} /* Writes to a normal 16-byte Falcon register, locking as appropriate. */ static inline void falcon_write(struct efx_nic *efx, efx_oword_t *value, diff --git a/drivers/net/sfc/falcon_xmac.c b/drivers/net/sfc/falcon_xmac.c index d2978d4d3bf..dbdcee4b0f8 100644 --- a/drivers/net/sfc/falcon_xmac.c +++ b/drivers/net/sfc/falcon_xmac.c @@ -221,7 +221,7 @@ static int falcon_xgmii_status(struct efx_nic *efx) { efx_dword_t reg; - if (FALCON_REV(efx) < FALCON_REV_B0) + if (falcon_rev(efx) < FALCON_REV_B0) return 1; /* The ISR latches, so clear it and re-read */ @@ -241,7 +241,7 @@ static void falcon_mask_status_intr(struct efx_nic *efx, int enable) { efx_dword_t reg; - if ((FALCON_REV(efx) < FALCON_REV_B0) || LOOPBACK_INTERNAL(efx)) + if ((falcon_rev(efx) < FALCON_REV_B0) || LOOPBACK_INTERNAL(efx)) return; /* Flush the ISR */ @@ -639,7 +639,7 @@ int falcon_xmac_set_pause(struct efx_nic *efx, enum efx_fc_type flow_control) reset = ((flow_control & EFX_FC_TX) && !(efx->flow_control & EFX_FC_TX)); if (EFX_WORKAROUND_11482(efx) && reset) { - if (FALCON_REV(efx) >= FALCON_REV_B0) { + if (falcon_rev(efx) >= FALCON_REV_B0) { /* Recover by resetting the EM block */ if (efx->link_up) falcon_drain_tx_fifo(efx); diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h index 59f261b4171..18b21ef2301 100644 --- a/drivers/net/sfc/net_driver.h +++ b/drivers/net/sfc/net_driver.h @@ -52,28 +52,19 @@ #define EFX_WARN_ON_PARANOID(x) do {} while (0) #endif -#define NET_DEV_REGISTERED(efx) \ - ((efx)->net_dev->reg_state == NETREG_REGISTERED) - -/* Include net device name in log messages if it has been registered. - * Use efx->name not efx->net_dev->name so that races with (un)registration - * are harmless. - */ -#define NET_DEV_NAME(efx) (NET_DEV_REGISTERED(efx) ? (efx)->name : "") - /* Un-rate-limited logging */ #define EFX_ERR(efx, fmt, args...) \ -dev_err(&((efx)->pci_dev->dev), "ERR: %s " fmt, NET_DEV_NAME(efx), ##args) +dev_err(&((efx)->pci_dev->dev), "ERR: %s " fmt, efx_dev_name(efx), ##args) #define EFX_INFO(efx, fmt, args...) \ -dev_info(&((efx)->pci_dev->dev), "INFO: %s " fmt, NET_DEV_NAME(efx), ##args) +dev_info(&((efx)->pci_dev->dev), "INFO: %s " fmt, efx_dev_name(efx), ##args) #ifdef EFX_ENABLE_DEBUG #define EFX_LOG(efx, fmt, args...) \ -dev_info(&((efx)->pci_dev->dev), "DBG: %s " fmt, NET_DEV_NAME(efx), ##args) +dev_info(&((efx)->pci_dev->dev), "DBG: %s " fmt, efx_dev_name(efx), ##args) #else #define EFX_LOG(efx, fmt, args...) \ -dev_dbg(&((efx)->pci_dev->dev), "DBG: %s " fmt, NET_DEV_NAME(efx), ##args) +dev_dbg(&((efx)->pci_dev->dev), "DBG: %s " fmt, efx_dev_name(efx), ##args) #endif #define EFX_TRACE(efx, fmt, args...) do {} while (0) @@ -760,6 +751,20 @@ struct efx_nic { void *loopback_selftest; }; +static inline int efx_dev_registered(struct efx_nic *efx) +{ + return efx->net_dev->reg_state == NETREG_REGISTERED; +} + +/* Net device name, for inclusion in log messages if it has been registered. + * Use efx->name not efx->net_dev->name so that races with (un)registration + * are harmless. + */ +static inline const char *efx_dev_name(struct efx_nic *efx) +{ + return efx_dev_registered(efx) ? efx->name : ""; +} + /** * struct efx_nic_type - Efx device type definition * @mem_bar: Memory BAR number diff --git a/drivers/net/sfc/rx.c b/drivers/net/sfc/rx.c index a6413309c57..f15d3322534 100644 --- a/drivers/net/sfc/rx.c +++ b/drivers/net/sfc/rx.c @@ -86,14 +86,21 @@ static unsigned int rx_refill_limit = 95; */ #define EFX_RXD_HEAD_ROOM 2 -/* Macros for zero-order pages (potentially) containing multiple RX buffers */ -#define RX_DATA_OFFSET(_data) \ - (((unsigned long) (_data)) & (PAGE_SIZE-1)) -#define RX_BUF_OFFSET(_rx_buf) \ - RX_DATA_OFFSET((_rx_buf)->data) - -#define RX_PAGE_SIZE(_efx) \ - (PAGE_SIZE * (1u << (_efx)->rx_buffer_order)) +static inline unsigned int efx_page_offset(void *p) +{ + return (__force unsigned int)p & (PAGE_SIZE - 1); +} +static inline unsigned int efx_rx_buf_offset(struct efx_rx_buffer *buf) +{ + /* Offset is always within one page, so we don't need to consider + * the page order. + */ + return efx_page_offset(buf->data); +} +static inline unsigned int efx_rx_buf_size(struct efx_nic *efx) +{ + return PAGE_SIZE << efx->rx_buffer_order; +} /************************************************************************** @@ -269,7 +276,7 @@ static inline int efx_init_rx_buffer_page(struct efx_rx_queue *rx_queue, return -ENOMEM; dma_addr = pci_map_page(efx->pci_dev, rx_buf->page, - 0, RX_PAGE_SIZE(efx), + 0, efx_rx_buf_size(efx), PCI_DMA_FROMDEVICE); if (unlikely(pci_dma_mapping_error(dma_addr))) { @@ -284,7 +291,7 @@ static inline int efx_init_rx_buffer_page(struct efx_rx_queue *rx_queue, EFX_PAGE_IP_ALIGN); } - offset = RX_DATA_OFFSET(rx_queue->buf_data); + offset = efx_page_offset(rx_queue->buf_data); rx_buf->len = bytes; rx_buf->dma_addr = rx_queue->buf_dma_addr + offset; rx_buf->data = rx_queue->buf_data; @@ -295,7 +302,7 @@ static inline int efx_init_rx_buffer_page(struct efx_rx_queue *rx_queue, rx_queue->buf_data += ((bytes + 0x1ff) & ~0x1ff); offset += ((bytes + 0x1ff) & ~0x1ff); - space = RX_PAGE_SIZE(efx) - offset; + space = efx_rx_buf_size(efx) - offset; if (space >= bytes) { /* Refs dropped on kernel releasing each skb */ get_page(rx_queue->buf_page); @@ -344,7 +351,8 @@ static inline void efx_unmap_rx_buffer(struct efx_nic *efx, EFX_BUG_ON_PARANOID(rx_buf->skb); if (rx_buf->unmap_addr) { pci_unmap_page(efx->pci_dev, rx_buf->unmap_addr, - RX_PAGE_SIZE(efx), PCI_DMA_FROMDEVICE); + efx_rx_buf_size(efx), + PCI_DMA_FROMDEVICE); rx_buf->unmap_addr = 0; } } else if (likely(rx_buf->skb)) { @@ -553,7 +561,7 @@ static inline void efx_rx_packet_lro(struct efx_channel *channel, struct skb_frag_struct frags; frags.page = rx_buf->page; - frags.page_offset = RX_BUF_OFFSET(rx_buf); + frags.page_offset = efx_rx_buf_offset(rx_buf); frags.size = rx_buf->len; lro_receive_frags(lro_mgr, &frags, rx_buf->len, @@ -598,7 +606,7 @@ static inline struct sk_buff *efx_rx_mk_skb(struct efx_rx_buffer *rx_buf, if (unlikely(rx_buf->len > hdr_len)) { struct skb_frag_struct *frag = skb_shinfo(skb)->frags; frag->page = rx_buf->page; - frag->page_offset = RX_BUF_OFFSET(rx_buf) + hdr_len; + frag->page_offset = efx_rx_buf_offset(rx_buf) + hdr_len; frag->size = skb->len - hdr_len; skb_shinfo(skb)->nr_frags = 1; skb->data_len = frag->size; @@ -852,7 +860,8 @@ void efx_fini_rx_queue(struct efx_rx_queue *rx_queue) /* For a page that is part-way through splitting into RX buffers */ if (rx_queue->buf_page != NULL) { pci_unmap_page(rx_queue->efx->pci_dev, rx_queue->buf_dma_addr, - RX_PAGE_SIZE(rx_queue->efx), PCI_DMA_FROMDEVICE); + efx_rx_buf_size(rx_queue->efx), + PCI_DMA_FROMDEVICE); __free_pages(rx_queue->buf_page, rx_queue->efx->rx_buffer_order); rx_queue->buf_page = NULL; diff --git a/drivers/net/sfc/selftest.c b/drivers/net/sfc/selftest.c index cbda15946e8..2fb69d8b3d7 100644 --- a/drivers/net/sfc/selftest.c +++ b/drivers/net/sfc/selftest.c @@ -424,10 +424,10 @@ static int efx_tx_loopback(struct efx_tx_queue *tx_queue) * interrupt handler. */ smp_wmb(); - if (NET_DEV_REGISTERED(efx)) + if (efx_dev_registered(efx)) netif_tx_lock_bh(efx->net_dev); rc = efx_xmit(efx, tx_queue, skb); - if (NET_DEV_REGISTERED(efx)) + if (efx_dev_registered(efx)) netif_tx_unlock_bh(efx->net_dev); if (rc != NETDEV_TX_OK) { @@ -453,7 +453,7 @@ static int efx_rx_loopback(struct efx_tx_queue *tx_queue, int tx_done = 0, rx_good, rx_bad; int i, rc = 0; - if (NET_DEV_REGISTERED(efx)) + if (efx_dev_registered(efx)) netif_tx_lock_bh(efx->net_dev); /* Count the number of tx completions, and decrement the refcnt. Any @@ -465,7 +465,7 @@ static int efx_rx_loopback(struct efx_tx_queue *tx_queue, dev_kfree_skb_any(skb); } - if (NET_DEV_REGISTERED(efx)) + if (efx_dev_registered(efx)) netif_tx_unlock_bh(efx->net_dev); /* Check TX completion and received packet counts */ diff --git a/drivers/net/sfc/tx.c b/drivers/net/sfc/tx.c index 75eb0fd5fd2..5cdd082ab8f 100644 --- a/drivers/net/sfc/tx.c +++ b/drivers/net/sfc/tx.c @@ -387,7 +387,7 @@ void efx_xmit_done(struct efx_tx_queue *tx_queue, unsigned int index) if (unlikely(tx_queue->stopped)) { fill_level = tx_queue->insert_count - tx_queue->read_count; if (fill_level < EFX_NETDEV_TX_THRESHOLD(tx_queue)) { - EFX_BUG_ON_PARANOID(!NET_DEV_REGISTERED(efx)); + EFX_BUG_ON_PARANOID(!efx_dev_registered(efx)); /* Do this under netif_tx_lock(), to avoid racing * with efx_xmit(). */ diff --git a/drivers/net/sfc/workarounds.h b/drivers/net/sfc/workarounds.h index dca62f19019..35ab19c27f8 100644 --- a/drivers/net/sfc/workarounds.h +++ b/drivers/net/sfc/workarounds.h @@ -16,7 +16,7 @@ */ #define EFX_WORKAROUND_ALWAYS(efx) 1 -#define EFX_WORKAROUND_FALCON_A(efx) (FALCON_REV(efx) <= FALCON_REV_A1) +#define EFX_WORKAROUND_FALCON_A(efx) (falcon_rev(efx) <= FALCON_REV_A1) /* XAUI resets if link not detected */ #define EFX_WORKAROUND_5147 EFX_WORKAROUND_ALWAYS -- cgit v1.2.3 From 184be0c21aba048cf510036edeee095e68740951 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 16 May 2008 21:16:31 +0100 Subject: sfc: Merged efx_page_offset() into efx_rx_buf_offset() Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik --- drivers/net/sfc/rx.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sfc/rx.c b/drivers/net/sfc/rx.c index f15d3322534..88f87ef5e15 100644 --- a/drivers/net/sfc/rx.c +++ b/drivers/net/sfc/rx.c @@ -86,16 +86,12 @@ static unsigned int rx_refill_limit = 95; */ #define EFX_RXD_HEAD_ROOM 2 -static inline unsigned int efx_page_offset(void *p) -{ - return (__force unsigned int)p & (PAGE_SIZE - 1); -} static inline unsigned int efx_rx_buf_offset(struct efx_rx_buffer *buf) { /* Offset is always within one page, so we don't need to consider * the page order. */ - return efx_page_offset(buf->data); + return (__force unsigned long) buf->data & (PAGE_SIZE - 1); } static inline unsigned int efx_rx_buf_size(struct efx_nic *efx) { @@ -291,10 +287,10 @@ static inline int efx_init_rx_buffer_page(struct efx_rx_queue *rx_queue, EFX_PAGE_IP_ALIGN); } - offset = efx_page_offset(rx_queue->buf_data); rx_buf->len = bytes; - rx_buf->dma_addr = rx_queue->buf_dma_addr + offset; rx_buf->data = rx_queue->buf_data; + offset = efx_rx_buf_offset(rx_buf); + rx_buf->dma_addr = rx_queue->buf_dma_addr + offset; /* Try to pack multiple buffers per page */ if (efx->rx_buffer_order == 0) { -- cgit v1.2.3 From 086ea3564a5378a06c7cbfaf9d2727bc58a8c285 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 16 May 2008 21:17:06 +0100 Subject: sfc: Use resource_size_t for PCI bus address This should make the driver work on 32-bit systems with 64-bit PCI support. Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik --- drivers/net/sfc/efx.c | 11 ++++++----- drivers/net/sfc/net_driver.h | 2 +- 2 files changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index 86d40295a77..f6131e578b4 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -778,15 +778,16 @@ static int efx_init_io(struct efx_nic *efx) efx->membase = ioremap_nocache(efx->membase_phys, efx->type->mem_map_size); if (!efx->membase) { - EFX_ERR(efx, "could not map memory BAR %d at %lx+%x\n", - efx->type->mem_bar, efx->membase_phys, + EFX_ERR(efx, "could not map memory BAR %d at %llx+%x\n", + efx->type->mem_bar, + (unsigned long long)efx->membase_phys, efx->type->mem_map_size); rc = -ENOMEM; goto fail4; } - EFX_LOG(efx, "memory BAR %u at %lx+%x (virtual %p)\n", - efx->type->mem_bar, efx->membase_phys, efx->type->mem_map_size, - efx->membase); + EFX_LOG(efx, "memory BAR %u at %llx+%x (virtual %p)\n", + efx->type->mem_bar, (unsigned long long)efx->membase_phys, + efx->type->mem_map_size, efx->membase); return 0; diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h index 18b21ef2301..a84f9756ca7 100644 --- a/drivers/net/sfc/net_driver.h +++ b/drivers/net/sfc/net_driver.h @@ -686,7 +686,7 @@ struct efx_nic { struct workqueue_struct *workqueue; struct work_struct reset_work; struct delayed_work monitor_work; - unsigned long membase_phys; + resource_size_t membase_phys; void __iomem *membase; spinlock_t biu_lock; enum efx_int_mode interrupt_mode; -- cgit v1.2.3 From 5b9e207ced5bb7af98b3c147171893435f5104ca Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 16 May 2008 21:18:14 +0100 Subject: sfc: Correct and expand some comments These comments have been revised in response to questions raised by Andrew Morton in <20080501120858.207b6dd6.akpm@linux-foundation.org>. Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik --- drivers/net/sfc/efx.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index f6131e578b4..11ee0d4407c 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -199,11 +199,12 @@ static inline int efx_process_channel(struct efx_channel *channel, int rx_quota) */ static inline void efx_channel_processed(struct efx_channel *channel) { - /* Write to EVQ_RPTR_REG. If a new event arrived in a race - * with finishing processing, a new interrupt will be raised. - */ + /* The interrupt handler for this channel may set work_pending + * as soon as we acknowledge the events we've seen. Make sure + * it's cleared before then. */ channel->work_pending = 0; - smp_wmb(); /* Ensure channel updated before any new interrupt. */ + smp_wmb(); + falcon_eventq_read_ack(channel); } @@ -427,9 +428,12 @@ static void efx_start_channel(struct efx_channel *channel) netif_napi_add(channel->napi_dev, &channel->napi_str, efx_poll, napi_weight); + /* The interrupt handler for this channel may set work_pending + * as soon as we enable it. Make sure it's cleared before + * then. Similarly, make sure it sees the enabled flag set. */ channel->work_pending = 0; channel->enabled = 1; - smp_wmb(); /* ensure channel updated before first interrupt */ + smp_wmb(); napi_enable(&channel->napi_str); @@ -1332,13 +1336,17 @@ static int efx_net_stop(struct net_device *net_dev) return 0; } -/* Context: process, dev_base_lock held, non-blocking. */ +/* Context: process, dev_base_lock or RTNL held, non-blocking. */ static struct net_device_stats *efx_net_stats(struct net_device *net_dev) { struct efx_nic *efx = net_dev->priv; struct efx_mac_stats *mac_stats = &efx->mac_stats; struct net_device_stats *stats = &net_dev->stats; + /* Update stats if possible, but do not wait if another thread + * is updating them (or resetting the NIC); slightly stale + * stats are acceptable. + */ if (!spin_trylock(&efx->stats_lock)) return stats; if (efx->state == STATE_RUNNING) { -- cgit v1.2.3 From 9bbd7d9a3528de1b5b915fa77df027b4de62174c Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 16 May 2008 21:18:48 +0100 Subject: sfc: Use DMA_BIT_MASK() instead of our own DMA mask macros Also change type of efx_nic_type::max_dma_mask to u64, matching pci_dma_supported() parameter type. Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik --- drivers/net/sfc/bitfield.h | 3 --- drivers/net/sfc/falcon.c | 13 ++----------- drivers/net/sfc/net_driver.h | 2 +- 3 files changed, 3 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sfc/bitfield.h b/drivers/net/sfc/bitfield.h index c98a591bd80..2c79d27404e 100644 --- a/drivers/net/sfc/bitfield.h +++ b/drivers/net/sfc/bitfield.h @@ -501,8 +501,5 @@ typedef union efx_oword { #define DMA_ADDR_T_WIDTH (8 * sizeof(dma_addr_t)) #define EFX_DMA_TYPE_WIDTH(width) \ (((width) < DMA_ADDR_T_WIDTH) ? (width) : DMA_ADDR_T_WIDTH) -#define EFX_DMA_MAX_MASK ((DMA_ADDR_T_WIDTH == 64) ? \ - ~((u64) 0) : ~((u32) 0)) -#define EFX_DMA_MASK(mask) ((mask) & EFX_DMA_MAX_MASK) #endif /* EFX_BITFIELD_H */ diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index e02f1d1728a..475b596383c 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -116,17 +116,8 @@ MODULE_PARM_DESC(rx_xon_thresh_bytes, "RX fifo XON threshold"); ************************************************************************** */ -/* DMA address mask (up to 46-bit, avoiding compiler warnings) - * - * Note that it is possible to have a platform with 64-bit longs and - * 32-bit DMA addresses, or vice versa. EFX_DMA_MASK takes care of the - * platform DMA mask. - */ -#if BITS_PER_LONG == 64 -#define FALCON_DMA_MASK EFX_DMA_MASK(0x00003fffffffffffUL) -#else -#define FALCON_DMA_MASK EFX_DMA_MASK(0x00003fffffffffffULL) -#endif +/* DMA address mask */ +#define FALCON_DMA_MASK DMA_BIT_MASK(46) /* TX DMA length mask (13-bit) */ #define FALCON_TX_DMA_MASK (4096 - 1) diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h index a84f9756ca7..77418aed9a3 100644 --- a/drivers/net/sfc/net_driver.h +++ b/drivers/net/sfc/net_driver.h @@ -800,7 +800,7 @@ struct efx_nic_type { unsigned int txd_ring_mask; unsigned int rxd_ring_mask; unsigned int evq_size; - dma_addr_t max_dma_mask; + u64 max_dma_mask; unsigned int tx_dma_mask; unsigned bug5391_mask; -- cgit v1.2.3 From 6f8135ca7224d98c2de43edde69f4e6bec12da0e Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 16 May 2008 21:19:05 +0100 Subject: sfc: Do not define inline macro Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik --- drivers/net/sfc/net_driver.h | 5 ----- 1 file changed, 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h index 77418aed9a3..be09180ca39 100644 --- a/drivers/net/sfc/net_driver.h +++ b/drivers/net/sfc/net_driver.h @@ -81,11 +81,6 @@ do {if (net_ratelimit()) EFX_INFO(efx, fmt, ##args); } while (0) #define EFX_LOG_RL(efx, fmt, args...) \ do {if (net_ratelimit()) EFX_LOG(efx, fmt, ##args); } while (0) -/* Kernel headers may redefine inline anyway */ -#ifndef inline -#define inline inline __attribute__ ((always_inline)) -#endif - /************************************************************************** * * Efx data structures -- cgit v1.2.3 From 24c28edc5a1b1dc4677eb13408ff3492d65df159 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 16 May 2008 21:19:21 +0100 Subject: sfc: Use __packed macro Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik --- drivers/net/sfc/falcon_hwdefs.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sfc/falcon_hwdefs.h b/drivers/net/sfc/falcon_hwdefs.h index 06e2d68fc3d..6d003114eea 100644 --- a/drivers/net/sfc/falcon_hwdefs.h +++ b/drivers/net/sfc/falcon_hwdefs.h @@ -1125,7 +1125,7 @@ struct falcon_nvconfig_board_v2 { u8 port1_phy_type; __le16 asic_sub_revision; __le16 board_revision; -} __attribute__ ((packed)); +} __packed; #define NVCONFIG_BASE 0x300 #define NVCONFIG_BOARD_MAGIC_NUM 0xFA1C @@ -1144,6 +1144,6 @@ struct falcon_nvconfig { __le16 board_struct_ver; __le16 board_checksum; struct falcon_nvconfig_board_v2 board_v2; -} __attribute__ ((packed)); +} __packed; #endif /* EFX_FALCON_HWDEFS_H */ -- cgit v1.2.3 From 5daab96d873721cb84f4583f232b88fcd67c51fb Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 16 May 2008 21:19:43 +0100 Subject: sfc: Change type of efx_nic::nic_data to struct falcon_nic_data * Remove redundant casts and variable. Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik --- drivers/net/sfc/falcon.c | 5 +---- drivers/net/sfc/net_driver.h | 2 +- 2 files changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index 475b596383c..ac14460e355 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -2411,7 +2411,7 @@ int falcon_probe_nic(struct efx_nic *efx) /* Allocate storage for hardware specific data */ nic_data = kzalloc(sizeof(*nic_data), GFP_KERNEL); - efx->nic_data = (void *) nic_data; + efx->nic_data = nic_data; /* Determine number of ports etc. */ rc = falcon_probe_nic_variant(efx); @@ -2481,13 +2481,10 @@ int falcon_probe_nic(struct efx_nic *efx) */ int falcon_init_nic(struct efx_nic *efx) { - struct falcon_nic_data *data; efx_oword_t temp; unsigned thresh; int rc; - data = (struct falcon_nic_data *)efx->nic_data; - /* Set up the address region register. This is only needed * for the B0 FPGA, but since we are just pushing in the * reset defaults this may as well be unconditional. */ diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h index be09180ca39..f4757e16484 100644 --- a/drivers/net/sfc/net_driver.h +++ b/drivers/net/sfc/net_driver.h @@ -705,7 +705,7 @@ struct efx_nic { unsigned n_rx_nodesc_drop_cnt; - void *nic_data; + struct falcon_nic_data *nic_data; struct mutex mac_lock; int port_enabled; -- cgit v1.2.3 From d3208b5ebae9e62c32f0cf74dce1d4ddfac3f895 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 16 May 2008 21:20:00 +0100 Subject: sfc: Remove redundant casts to and from void * Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik --- drivers/net/sfc/efx.c | 2 +- drivers/net/sfc/falcon.c | 18 +++++++++--------- drivers/net/sfc/rx.c | 8 ++++---- drivers/net/sfc/selftest.c | 4 ++-- drivers/net/sfc/xfp_phy.c | 2 +- 5 files changed, 17 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index 11ee0d4407c..449760642e3 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -1490,7 +1490,7 @@ static void efx_set_multicast_list(struct net_device *net_dev) static int efx_netdev_event(struct notifier_block *this, unsigned long event, void *ptr) { - struct net_device *net_dev = (struct net_device *)ptr; + struct net_device *net_dev = ptr; if (net_dev->open == efx_net_open && event == NETDEV_CHANGENAME) { struct efx_nic *efx = net_dev->priv; diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index ac14460e355..d3f749c72d4 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -1396,7 +1396,7 @@ static inline void falcon_irq_ack_a1(struct efx_nic *efx) static irqreturn_t falcon_fatal_interrupt(struct efx_nic *efx) { struct falcon_nic_data *nic_data = efx->nic_data; - efx_oword_t *int_ker = (efx_oword_t *) efx->irq_status.addr; + efx_oword_t *int_ker = efx->irq_status.addr; efx_oword_t fatal_intr; int error, mem_perr; static int n_int_errors; @@ -1442,8 +1442,8 @@ out: */ static irqreturn_t falcon_legacy_interrupt_b0(int irq, void *dev_id) { - struct efx_nic *efx = (struct efx_nic *)dev_id; - efx_oword_t *int_ker = (efx_oword_t *) efx->irq_status.addr; + struct efx_nic *efx = dev_id; + efx_oword_t *int_ker = efx->irq_status.addr; struct efx_channel *channel; efx_dword_t reg; u32 queues; @@ -1480,8 +1480,8 @@ static irqreturn_t falcon_legacy_interrupt_b0(int irq, void *dev_id) static irqreturn_t falcon_legacy_interrupt_a1(int irq, void *dev_id) { - struct efx_nic *efx = (struct efx_nic *)dev_id; - efx_oword_t *int_ker = (efx_oword_t *) efx->irq_status.addr; + struct efx_nic *efx = dev_id; + efx_oword_t *int_ker = efx->irq_status.addr; struct efx_channel *channel; int syserr; int queues; @@ -1533,9 +1533,9 @@ static irqreturn_t falcon_legacy_interrupt_a1(int irq, void *dev_id) */ static irqreturn_t falcon_msi_interrupt(int irq, void *dev_id) { - struct efx_channel *channel = (struct efx_channel *)dev_id; + struct efx_channel *channel = dev_id; struct efx_nic *efx = channel->efx; - efx_oword_t *int_ker = (efx_oword_t *) efx->irq_status.addr; + efx_oword_t *int_ker = efx->irq_status.addr; int syserr; efx->last_irq_cpu = raw_smp_processor_id(); @@ -1932,7 +1932,7 @@ static int falcon_gmii_wait(struct efx_nic *efx) static void falcon_mdio_write(struct net_device *net_dev, int phy_id, int addr, int value) { - struct efx_nic *efx = (struct efx_nic *)net_dev->priv; + struct efx_nic *efx = net_dev->priv; unsigned int phy_id2 = phy_id & FALCON_PHY_ID_ID_MASK; efx_oword_t reg; @@ -2000,7 +2000,7 @@ static void falcon_mdio_write(struct net_device *net_dev, int phy_id, * could be read, -1 will be returned. */ static int falcon_mdio_read(struct net_device *net_dev, int phy_id, int addr) { - struct efx_nic *efx = (struct efx_nic *)net_dev->priv; + struct efx_nic *efx = net_dev->priv; unsigned int phy_addr = phy_id & FALCON_PHY_ID_ID_MASK; efx_oword_t reg; int value = -1; diff --git a/drivers/net/sfc/rx.c b/drivers/net/sfc/rx.c index 88f87ef5e15..601b001437c 100644 --- a/drivers/net/sfc/rx.c +++ b/drivers/net/sfc/rx.c @@ -109,7 +109,7 @@ static inline unsigned int efx_rx_buf_size(struct efx_nic *efx) static int efx_lro_get_skb_hdr(struct sk_buff *skb, void **ip_hdr, void **tcpudp_hdr, u64 *hdr_flags, void *priv) { - struct efx_channel *channel = (struct efx_channel *)priv; + struct efx_channel *channel = priv; struct iphdr *iph; struct tcphdr *th; @@ -134,12 +134,12 @@ static int efx_get_frag_hdr(struct skb_frag_struct *frag, void **mac_hdr, void **ip_hdr, void **tcpudp_hdr, u64 *hdr_flags, void *priv) { - struct efx_channel *channel = (struct efx_channel *)priv; + struct efx_channel *channel = priv; struct ethhdr *eh; struct iphdr *iph; /* We support EtherII and VLAN encapsulated IPv4 */ - eh = (struct ethhdr *)(page_address(frag->page) + frag->page_offset); + eh = page_address(frag->page) + frag->page_offset; *mac_hdr = eh; if (eh->h_proto == htons(ETH_P_IP)) { @@ -283,7 +283,7 @@ static inline int efx_init_rx_buffer_page(struct efx_rx_queue *rx_queue, rx_queue->buf_page = rx_buf->page; rx_queue->buf_dma_addr = dma_addr; - rx_queue->buf_data = ((char *) page_address(rx_buf->page) + + rx_queue->buf_data = (page_address(rx_buf->page) + EFX_PAGE_IP_ALIGN); } diff --git a/drivers/net/sfc/selftest.c b/drivers/net/sfc/selftest.c index 2fb69d8b3d7..c98f350525a 100644 --- a/drivers/net/sfc/selftest.c +++ b/drivers/net/sfc/selftest.c @@ -290,7 +290,7 @@ void efx_loopback_rx_packet(struct efx_nic *efx, payload = &state->payload; - received = (struct efx_loopback_payload *)(char *) buf_ptr; + received = (struct efx_loopback_payload *) buf_ptr; received->ip.saddr = payload->ip.saddr; received->ip.check = payload->ip.check; @@ -700,7 +700,7 @@ int efx_offline_test(struct efx_nic *efx, * "flushing" so all inflight packets are dropped */ BUG_ON(efx->loopback_selftest); state->flush = 1; - efx->loopback_selftest = (void *)state; + efx->loopback_selftest = state; rc = efx_test_loopbacks(efx, tests, loopback_modes); diff --git a/drivers/net/sfc/xfp_phy.c b/drivers/net/sfc/xfp_phy.c index 3b9f9ddbc37..cf75fab3e77 100644 --- a/drivers/net/sfc/xfp_phy.c +++ b/drivers/net/sfc/xfp_phy.c @@ -85,7 +85,7 @@ static int xfp_phy_init(struct efx_nic *efx) int rc; phy_data = kzalloc(sizeof(struct xfp_phy_data), GFP_KERNEL); - efx->phy_data = (void *) phy_data; + efx->phy_data = phy_data; EFX_INFO(efx, "XFP: PHY ID reg %x (OUI %x model %x revision" " %x)\n", devid, MDIO_ID_OUI(devid), MDIO_ID_MODEL(devid), -- cgit v1.2.3 From 9b7bfc4c4c601a5cb368751f60cac054492c45f5 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 16 May 2008 21:20:20 +0100 Subject: sfc: Added checks for heap allocation failure Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik --- drivers/net/sfc/selftest.c | 2 ++ drivers/net/sfc/tenxpress.c | 2 ++ drivers/net/sfc/xfp_phy.c | 2 ++ 3 files changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/sfc/selftest.c b/drivers/net/sfc/selftest.c index c98f350525a..3b2de9fe7f2 100644 --- a/drivers/net/sfc/selftest.c +++ b/drivers/net/sfc/selftest.c @@ -517,6 +517,8 @@ efx_test_loopback(struct efx_tx_queue *tx_queue, state->packet_count = min(1 << (i << 2), state->packet_count); state->skbs = kzalloc(sizeof(state->skbs[0]) * state->packet_count, GFP_KERNEL); + if (!state->skbs) + return -ENOMEM; state->flush = 0; EFX_LOG(efx, "TX queue %d testing %s loopback with %d " diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c index 38e96ed33d3..c0146061c32 100644 --- a/drivers/net/sfc/tenxpress.c +++ b/drivers/net/sfc/tenxpress.c @@ -211,6 +211,8 @@ static int tenxpress_phy_init(struct efx_nic *efx) int rc = 0; phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL); + if (!phy_data) + return -ENOMEM; efx->phy_data = phy_data; tenxpress_set_state(efx, TENXPRESS_STATUS_NORMAL); diff --git a/drivers/net/sfc/xfp_phy.c b/drivers/net/sfc/xfp_phy.c index cf75fab3e77..f3684ad2888 100644 --- a/drivers/net/sfc/xfp_phy.c +++ b/drivers/net/sfc/xfp_phy.c @@ -85,6 +85,8 @@ static int xfp_phy_init(struct efx_nic *efx) int rc; phy_data = kzalloc(sizeof(struct xfp_phy_data), GFP_KERNEL); + if (!phy_data) + return -ENOMEM; efx->phy_data = phy_data; EFX_INFO(efx, "XFP: PHY ID reg %x (OUI %x model %x revision" -- cgit v1.2.3 From 8757a5f71530c2dc8db7823ad68a5d4c2fbdad19 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 16 May 2008 21:21:06 +0100 Subject: sfc: Remove sub-minor component from driver version This driver has diverged from the out-of-tree driver to which the version number originally applied. It should be identified primarily by kernel version. Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik --- drivers/net/sfc/net_driver.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h index f4757e16484..5e20e7551da 100644 --- a/drivers/net/sfc/net_driver.h +++ b/drivers/net/sfc/net_driver.h @@ -42,7 +42,7 @@ #ifndef EFX_DRIVER_NAME #define EFX_DRIVER_NAME "sfc" #endif -#define EFX_DRIVER_VERSION "2.2.0136" +#define EFX_DRIVER_VERSION "2.2" #ifdef EFX_ENABLE_DEBUG #define EFX_BUG_ON_PARANOID(x) BUG_ON(x) -- cgit v1.2.3 From d494eacde8858f9b53f5c640692caf14eb3c8239 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 14 May 2008 17:04:13 -0700 Subject: sky2: restore vlan acceleration on reset If device has to be reset by sky2_restart, then need to restore the VLAN acceleration settings. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 29 +++++++++++++++++++---------- 1 file changed, 19 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index f226bcac7d1..3bb60530d4d 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1159,17 +1159,9 @@ static int sky2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) } #ifdef SKY2_VLAN_TAG_USED -static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp) +static void sky2_set_vlan_mode(struct sky2_hw *hw, u16 port, bool onoff) { - struct sky2_port *sky2 = netdev_priv(dev); - struct sky2_hw *hw = sky2->hw; - u16 port = sky2->port; - - netif_tx_lock_bh(dev); - napi_disable(&hw->napi); - - sky2->vlgrp = grp; - if (grp) { + if (onoff) { sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), RX_VLAN_STRIP_ON); sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), @@ -1180,6 +1172,19 @@ static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_VLAN_TAG_OFF); } +} + +static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp) +{ + struct sky2_port *sky2 = netdev_priv(dev); + struct sky2_hw *hw = sky2->hw; + u16 port = sky2->port; + + netif_tx_lock_bh(dev); + napi_disable(&hw->napi); + + sky2->vlgrp = grp; + sky2_set_vlan_mode(hw, port, grp != NULL); sky2_read32(hw, B0_Y2_SP_LISR); napi_enable(&hw->napi); @@ -1418,6 +1423,10 @@ static int sky2_up(struct net_device *dev) sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map, TX_RING_SIZE - 1); +#ifdef SKY2_VLAN_TAG_USED + sky2_set_vlan_mode(hw, port, sky2->vlgrp != NULL); +#endif + err = sky2_rx_start(sky2); if (err) goto err_out; -- cgit v1.2.3 From 5bceeda3253d9ea6a38e2e918362a2610677f9c0 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 14 May 2008 16:20:12 -0700 Subject: [netdrvr] dm9000: use delayed work to update mii phy state fix use cancel_delayed_work_sync() Cc: Ben Dooks Cc: Enrico Scholz Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/dm9000.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c index d45bcd2660a..864295e081b 100644 --- a/drivers/net/dm9000.c +++ b/drivers/net/dm9000.c @@ -903,7 +903,7 @@ dm9000_stop(struct net_device *ndev) if (netif_msg_ifdown(db)) dev_dbg(db->dev, "shutting down %s\n", ndev->name); - cancel_delayed_work(&db->phy_poll); + cancel_delayed_work_sync(&db->phy_poll); netif_stop_queue(ndev); netif_carrier_off(ndev); -- cgit v1.2.3 From b166cfba01d62d04ae81ecce2d5dbe308db8083a Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 14 May 2008 16:20:14 -0700 Subject: pcnet32: fix warning pci_name() will be changed to return `const char *': drivers/net/pcnet32.c: In function 'pcnet32_probe1': drivers/net/pcnet32.c:1884: warning: passing argument 2 of 'pcnet32_alloc_ring' discards qualifiers from pointer target type Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/pcnet32.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index a1c454dbc16..1c89b97f4e0 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -325,7 +325,7 @@ static int pcnet32_get_regs_len(struct net_device *dev); static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *ptr); static void pcnet32_purge_tx_ring(struct net_device *dev); -static int pcnet32_alloc_ring(struct net_device *dev, char *name); +static int pcnet32_alloc_ring(struct net_device *dev, const char *name); static void pcnet32_free_ring(struct net_device *dev); static void pcnet32_check_media(struct net_device *dev, int verbose); @@ -1983,7 +1983,7 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev) } /* if any allocation fails, caller must also call pcnet32_free_ring */ -static int pcnet32_alloc_ring(struct net_device *dev, char *name) +static int pcnet32_alloc_ring(struct net_device *dev, const char *name) { struct pcnet32_private *lp = netdev_priv(dev); -- cgit v1.2.3 From 5d9bac8ece5e2a64a2a450c7e2d6901ed9152052 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 14 May 2008 16:20:15 -0700 Subject: drivers/net/tokenring/3c359.c: squish a warning When dev_name() is changed to return `const char *': drivers/net/tokenring/3c359.c: In function 'xl_probe': drivers/net/tokenring/3c359.c:318: warning: assignment discards qualifiers from pointer target type Cc: Jeff Garzik Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/tokenring/3c359.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/tokenring/3c359.h b/drivers/net/tokenring/3c359.h index b880cba0f6f..74cf8e1a181 100644 --- a/drivers/net/tokenring/3c359.h +++ b/drivers/net/tokenring/3c359.h @@ -264,7 +264,7 @@ struct xl_private { u16 asb; u8 __iomem *xl_mmio; - char *xl_card_name; + const char *xl_card_name; struct pci_dev *pdev ; spinlock_t xl_lock ; -- cgit v1.2.3 From 63dac8ff1b3709b5f7ba71283eb48b4e1f18d563 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 14 May 2008 16:20:15 -0700 Subject: drivers/net/tokenring/olympic.c: fix warning When dev_name() is changed to return `const char *': drivers/net/tokenring/olympic.c: In function 'olympic_probe': drivers/net/tokenring/olympic.c:234: warning: assignment discards qualifiers from pointer target type Cc: Jeff Garzik Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/tokenring/olympic.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/tokenring/olympic.h b/drivers/net/tokenring/olympic.h index c91956310fb..10fbba08978 100644 --- a/drivers/net/tokenring/olympic.h +++ b/drivers/net/tokenring/olympic.h @@ -254,7 +254,7 @@ struct olympic_private { u8 __iomem *olympic_mmio; u8 __iomem *olympic_lap; struct pci_dev *pdev ; - char *olympic_card_name ; + const char *olympic_card_name; spinlock_t olympic_lock ; -- cgit v1.2.3 From 74ef5c5025fed5ad6a1cbdfb5c2e831acdbbd2fe Mon Sep 17 00:00:00 2001 From: Pierre Ynard Date: Wed, 14 May 2008 16:20:16 -0700 Subject: rndis_host: increase delay in command response loop Some devices running some WinCE firmware (with SC_* Samsung processors according to the SynCE project, verified on a HTC P3600 device) fail to register because they apparently need extra time to respond correctly to requests. Increase the existing delay to satisfy them. Based on code from the SynCE project, on a suggestion of David Brownell. This patch Works For Me(tm). Signed-off-by: Pierre Ynard Acked-by: David Brownell Cc: Greg KH Cc: Jeff Garzik Cc: "David S. Miller" Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/usb/rndis_host.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c index 21a7785cb8b..e1177cca8a7 100644 --- a/drivers/net/usb/rndis_host.c +++ b/drivers/net/usb/rndis_host.c @@ -194,7 +194,7 @@ int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf) dev_dbg(&info->control->dev, "rndis response error, code %d\n", retval); } - msleep(2); + msleep(20); } dev_dbg(&info->control->dev, "rndis response timeout\n"); return -ETIMEDOUT; -- cgit v1.2.3 From 7fb1c2ac8ecaf0883f2fcb38dfc9ec2d15cee11d Mon Sep 17 00:00:00 2001 From: Brian King Date: Wed, 14 May 2008 09:48:25 -0500 Subject: ehea: Fix use after free on reboot Fixes the following use after free oops: ehea: Reboot: freeing all eHEA resources Unable to handle kernel paging request for data at address 0x6b6b6b6b6b6b6c5b Faulting instruction address: 0xd000000000354488 cpu 0x0: Vector: 300 (Data Access) at [c00000002ec6f310] pc: d000000000354488: .ehea_shutdown_single_port+0x50/0x78 [ehea] lr: d00000000035447c: .ehea_shutdown_single_port+0x44/0x78 [ehea] sp: c00000002ec6f590 msr: 8000000000009032 dar: 6b6b6b6b6b6b6c5b dsisr: 40000000 current = 0xc0000000281412e0 paca = 0xc0000000006df300 pid = 10930, comm = reboot enter ? for help [c00000002ec6f590] d00000000035d64c .ehea_remove+0x44/0x124 [ehea] (unreliable) [c00000002ec6f630] c000000000319f88 .of_platform_device_remove+0x40/0x58 [c00000002ec6f6a0] c000000000291018 .__device_release_driver+0xb0/0xf0 [c00000002ec6f730] c000000000291120 .driver_detach+0xc8/0xfc [c00000002ec6f7c0] c00000000028fe24 .bus_remove_driver+0xb4/0x114 [c00000002ec6f850] c000000000291768 .driver_unregister+0x54/0x74 [c00000002ec6f8e0] c00000000031a0c8 .of_unregister_driver+0x14/0x28 [c00000002ec6f950] c000000000023ba0 .ibmebus_unregister_driver+0x10/0x24 [c00000002ec6f9c0] d000000000354180 .ehea_reboot_notifier+0x30/0x4c [ehea] [c00000002ec6fa40] c0000000003c95a8 .notifier_call_chain+0x5c/0xcc [c00000002ec6fae0] c000000000082cd4 .__blocking_notifier_call_chain+0x70/0xb0 [c00000002ec6fb90] c000000000075cf8 .kernel_restart_prepare+0x24/0x58 [c00000002ec6fc10] c000000000075f0c .kernel_restart+0x20/0x6c [c00000002ec6fc90] c000000000078674 .sys_reboot+0x1d4/0x290 [c00000002ec6fe30] c0000000000086ac syscall_exit+0x0/0x40 Signed-off-by: Jeff Garzik --- drivers/net/ehea/ehea_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index d1b6d4e7495..8645224da1c 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -3178,11 +3178,12 @@ out_err: static void ehea_shutdown_single_port(struct ehea_port *port) { + struct ehea_adapter *adapter = port->adapter; unregister_netdev(port->netdev); ehea_unregister_port(port); kfree(port->mc_list); free_netdev(port->netdev); - port->adapter->active_ports--; + adapter->active_ports--; } static int ehea_setup_ports(struct ehea_adapter *adapter) -- cgit v1.2.3 From 6941727a08d49c88a58bc3afb55044df7932549e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Tue, 13 May 2008 14:16:53 +0300 Subject: hamradio/scc: add missing block braces to multi-statement if MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Ilpo Järvinen Signed-off-by: Jeff Garzik --- drivers/net/hamradio/scc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/hamradio/scc.c b/drivers/net/hamradio/scc.c index f9051593583..45ae9d1191d 100644 --- a/drivers/net/hamradio/scc.c +++ b/drivers/net/hamradio/scc.c @@ -1340,9 +1340,10 @@ static unsigned int scc_set_param(struct scc_channel *scc, unsigned int cmd, uns case PARAM_RTS: if ( !(scc->wreg[R5] & RTS) ) { - if (arg != TX_OFF) + if (arg != TX_OFF) { scc_key_trx(scc, TX_ON); scc_start_tx_timer(scc, t_txdelay, scc->kiss.txdelay); + } } else { if (arg == TX_OFF) { -- cgit v1.2.3 From 7ad62dbcb5766dae38516e0333a6f68a1b6df884 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Tue, 13 May 2008 14:16:54 +0300 Subject: s2io: add missing block braces to multistatement if statement MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Ilpo Järvinen Cc: Ramkrishna Vepa Cc: Rastapur Santosh Cc: Sivakumar Subramani Cc: Sreenivasa Honnur Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 523478ebfd6..0f3d230a320 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -1113,9 +1113,10 @@ static int s2io_on_nec_bridge(struct pci_dev *s2io_pdev) struct pci_dev *tdev = NULL; while ((tdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, tdev)) != NULL) { if (tdev->vendor == NEC_VENID && tdev->device == NEC_DEVID) { - if (tdev->bus == s2io_pdev->bus->parent) + if (tdev->bus == s2io_pdev->bus->parent) { pci_dev_put(tdev); return 1; + } } } return 0; -- cgit v1.2.3 From 0178ec3d3e4e48c63b350e712835a4a5c15c6c86 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 20 May 2008 00:53:00 +0300 Subject: make myri10ge_get_firmware_capabilities() static This patch makes the needlessly global myri10ge_get_firmware_capabilities() static. Signed-off-by: Adrian Bunk Signed-off-by: Jeff Garzik --- drivers/net/myri10ge/myri10ge.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index c91b12ea26a..36be6efc639 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -631,7 +631,7 @@ static int myri10ge_adopt_running_firmware(struct myri10ge_priv *mgp) return status; } -int myri10ge_get_firmware_capabilities(struct myri10ge_priv *mgp) +static int myri10ge_get_firmware_capabilities(struct myri10ge_priv *mgp) { struct myri10ge_cmd cmd; int status; -- cgit v1.2.3 From aff26e2faa782e196f28b86d04b093fd3bae1ffb Mon Sep 17 00:00:00 2001 From: Krzysztof Halasa Date: Mon, 19 May 2008 19:11:08 +0200 Subject: WAN: protect Cisco HDLC state changes with a spinlock. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof HaÅ‚asa Signed-off-by: Jeff Garzik --- drivers/net/wan/hdlc_cisco.c | 82 ++++++++++++++++++++++++++------------------ 1 file changed, 49 insertions(+), 33 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c index 7133c688cf2..762d21c1c70 100644 --- a/drivers/net/wan/hdlc_cisco.c +++ b/drivers/net/wan/hdlc_cisco.c @@ -56,6 +56,7 @@ struct cisco_state { cisco_proto settings; struct timer_list timer; + spinlock_t lock; unsigned long last_poll; int up; int request_sent; @@ -158,6 +159,7 @@ static int cisco_rx(struct sk_buff *skb) { struct net_device *dev = skb->dev; hdlc_device *hdlc = dev_to_hdlc(dev); + struct cisco_state *st = state(hdlc); struct hdlc_header *data = (struct hdlc_header*)skb->data; struct cisco_packet *cisco_data; struct in_device *in_dev; @@ -220,11 +222,12 @@ static int cisco_rx(struct sk_buff *skb) goto rx_error; case CISCO_KEEPALIVE_REQ: - state(hdlc)->rxseq = ntohl(cisco_data->par1); - if (state(hdlc)->request_sent && - ntohl(cisco_data->par2) == state(hdlc)->txseq) { - state(hdlc)->last_poll = jiffies; - if (!state(hdlc)->up) { + spin_lock(&st->lock); + st->rxseq = ntohl(cisco_data->par1); + if (st->request_sent && + ntohl(cisco_data->par2) == st->txseq) { + st->last_poll = jiffies; + if (!st->up) { u32 sec, min, hrs, days; sec = ntohl(cisco_data->time) / 1000; min = sec / 60; sec -= min * 60; @@ -232,12 +235,12 @@ static int cisco_rx(struct sk_buff *skb) days = hrs / 24; hrs -= days * 24; printk(KERN_INFO "%s: Link up (peer " "uptime %ud%uh%um%us)\n", - dev->name, days, hrs, - min, sec); + dev->name, days, hrs, min, sec); netif_dormant_off(dev); - state(hdlc)->up = 1; + st->up = 1; } } + spin_unlock(&st->lock); dev_kfree_skb_any(skb); return NET_RX_SUCCESS; @@ -261,24 +264,25 @@ static void cisco_timer(unsigned long arg) { struct net_device *dev = (struct net_device *)arg; hdlc_device *hdlc = dev_to_hdlc(dev); + struct cisco_state *st = state(hdlc); - if (state(hdlc)->up && - time_after(jiffies, state(hdlc)->last_poll + - state(hdlc)->settings.timeout * HZ)) { - state(hdlc)->up = 0; + spin_lock(&st->lock); + if (st->up && + time_after(jiffies, st->last_poll + st->settings.timeout * HZ)) { + st->up = 0; printk(KERN_INFO "%s: Link down\n", dev->name); netif_dormant_on(dev); } - cisco_keepalive_send(dev, CISCO_KEEPALIVE_REQ, - htonl(++state(hdlc)->txseq), - htonl(state(hdlc)->rxseq)); - state(hdlc)->request_sent = 1; - state(hdlc)->timer.expires = jiffies + - state(hdlc)->settings.interval * HZ; - state(hdlc)->timer.function = cisco_timer; - state(hdlc)->timer.data = arg; - add_timer(&state(hdlc)->timer); + cisco_keepalive_send(dev, CISCO_KEEPALIVE_REQ, htonl(++st->txseq), + htonl(st->rxseq)); + st->request_sent = 1; + spin_unlock(&st->lock); + + st->timer.expires = jiffies + st->settings.interval * HZ; + st->timer.function = cisco_timer; + st->timer.data = arg; + add_timer(&st->timer); } @@ -286,15 +290,20 @@ static void cisco_timer(unsigned long arg) static void cisco_start(struct net_device *dev) { hdlc_device *hdlc = dev_to_hdlc(dev); - state(hdlc)->up = 0; - state(hdlc)->request_sent = 0; - state(hdlc)->txseq = state(hdlc)->rxseq = 0; - - init_timer(&state(hdlc)->timer); - state(hdlc)->timer.expires = jiffies + HZ; /*First poll after 1s*/ - state(hdlc)->timer.function = cisco_timer; - state(hdlc)->timer.data = (unsigned long)dev; - add_timer(&state(hdlc)->timer); + struct cisco_state *st = state(hdlc); + unsigned long flags; + + spin_lock_irqsave(&st->lock, flags); + st->up = 0; + st->request_sent = 0; + st->txseq = st->rxseq = 0; + spin_unlock_irqrestore(&st->lock, flags); + + init_timer(&st->timer); + st->timer.expires = jiffies + HZ; /* First poll after 1 s */ + st->timer.function = cisco_timer; + st->timer.data = (unsigned long)dev; + add_timer(&st->timer); } @@ -302,10 +311,16 @@ static void cisco_start(struct net_device *dev) static void cisco_stop(struct net_device *dev) { hdlc_device *hdlc = dev_to_hdlc(dev); - del_timer_sync(&state(hdlc)->timer); + struct cisco_state *st = state(hdlc); + unsigned long flags; + + del_timer_sync(&st->timer); + + spin_lock_irqsave(&st->lock, flags); netif_dormant_on(dev); - state(hdlc)->up = 0; - state(hdlc)->request_sent = 0; + st->up = 0; + st->request_sent = 0; + spin_unlock_irqrestore(&st->lock, flags); } @@ -367,6 +382,7 @@ static int cisco_ioctl(struct net_device *dev, struct ifreq *ifr) return result; memcpy(&state(hdlc)->settings, &new_settings, size); + spin_lock_init(&state(hdlc)->lock); dev->hard_start_xmit = hdlc->xmit; dev->header_ops = &cisco_header_ops; dev->type = ARPHRD_CISCO; -- cgit v1.2.3 From 40ba182e3ca9f019f299ce5052fcd7e4cf68d11b Mon Sep 17 00:00:00 2001 From: Tobias Diedrich Date: Sun, 18 May 2008 15:00:36 +0200 Subject: [netdrvr] forcedeth: Restore multicast settings on resume nv_open() resets multicast settings, call nv_set_multicast(dev) to restore them. (Maybe this should rather be moved into nv_open()) Signed-off-by: Tobias Diedrich Signed-off-by: Jeff Garzik --- drivers/net/forcedeth.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 35f66d4a459..9eca97fb0a5 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -5823,6 +5823,7 @@ static int nv_resume(struct pci_dev *pdev) writel(txreg, base + NvRegTransmitPoll); rc = nv_open(dev); + nv_set_multicast(dev); out: return rc; } -- cgit v1.2.3 From 789585e968f07653a29a9e829aed20386043636c Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Sun, 18 May 2008 04:45:09 +0100 Subject: sb1250: use netdev_alloc_skb Use netdev_alloc_skb. This sets skb->dev and allows arch specific allocation. Also simplify and cleanup the alignment code. Signed-off-by: Stephen Hemminger Signed-off-by: Maciej W. Rozycki Signed-off-by: Jeff Garzik --- drivers/net/sb1250-mac.c | 67 ++++++++++++++++++++++-------------------------- 1 file changed, 31 insertions(+), 36 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c index 888b7dec986..33bb18f810f 100644 --- a/drivers/net/sb1250-mac.c +++ b/drivers/net/sb1250-mac.c @@ -179,8 +179,7 @@ enum sbmac_state { #define SBMAC_MAX_TXDESCR 256 #define SBMAC_MAX_RXDESCR 256 -#define ETHER_ALIGN 2 -#define ETHER_ADDR_LEN 6 +#define ETHER_ADDR_LEN 6 #define ENET_PACKET_SIZE 1518 /*#define ENET_PACKET_SIZE 9216 */ @@ -262,8 +261,6 @@ struct sbmac_softc { spinlock_t sbm_lock; /* spin lock */ int sbm_devflags; /* current device flags */ - int sbm_buffersize; - /* * Controller-specific things */ @@ -305,10 +302,11 @@ struct sbmac_softc { static void sbdma_initctx(struct sbmacdma *d, struct sbmac_softc *s, int chan, int txrx, int maxdescr); static void sbdma_channel_start(struct sbmacdma *d, int rxtx); -static int sbdma_add_rcvbuffer(struct sbmacdma *d, struct sk_buff *m); +static int sbdma_add_rcvbuffer(struct sbmac_softc *sc, struct sbmacdma *d, + struct sk_buff *m); static int sbdma_add_txbuffer(struct sbmacdma *d, struct sk_buff *m); static void sbdma_emptyring(struct sbmacdma *d); -static void sbdma_fillring(struct sbmacdma *d); +static void sbdma_fillring(struct sbmac_softc *sc, struct sbmacdma *d); static int sbdma_rx_process(struct sbmac_softc *sc, struct sbmacdma *d, int work_to_do, int poll); static void sbdma_tx_process(struct sbmac_softc *sc, struct sbmacdma *d, @@ -777,16 +775,13 @@ static void sbdma_channel_stop(struct sbmacdma *d) d->sbdma_remptr = NULL; } -static void sbdma_align_skb(struct sk_buff *skb,int power2,int offset) +static inline void sbdma_align_skb(struct sk_buff *skb, + unsigned int power2, unsigned int offset) { - unsigned long addr; - unsigned long newaddr; - - addr = (unsigned long) skb->data; - - newaddr = (addr + power2 - 1) & ~(power2 - 1); + unsigned char *addr = skb->data; + unsigned char *newaddr = PTR_ALIGN(addr, power2); - skb_reserve(skb,newaddr-addr+offset); + skb_reserve(skb, newaddr - addr + offset); } @@ -797,7 +792,8 @@ static void sbdma_align_skb(struct sk_buff *skb,int power2,int offset) * this queues a buffer for inbound packets. * * Input parameters: - * d - DMA channel descriptor + * sc - softc structure + * d - DMA channel descriptor * sb - sk_buff to add, or NULL if we should allocate one * * Return value: @@ -806,8 +802,10 @@ static void sbdma_align_skb(struct sk_buff *skb,int power2,int offset) ********************************************************************* */ -static int sbdma_add_rcvbuffer(struct sbmacdma *d, struct sk_buff *sb) +static int sbdma_add_rcvbuffer(struct sbmac_softc *sc, struct sbmacdma *d, + struct sk_buff *sb) { + struct net_device *dev = sc->sbm_dev; struct sbdmadscr *dsc; struct sbdmadscr *nextdsc; struct sk_buff *sb_new = NULL; @@ -848,14 +846,16 @@ static int sbdma_add_rcvbuffer(struct sbmacdma *d, struct sk_buff *sb) */ if (sb == NULL) { - sb_new = dev_alloc_skb(ENET_PACKET_SIZE + SMP_CACHE_BYTES * 2 + ETHER_ALIGN); + sb_new = netdev_alloc_skb(dev, ENET_PACKET_SIZE + + SMP_CACHE_BYTES * 2 + + NET_IP_ALIGN); if (sb_new == NULL) { pr_info("%s: sk_buff allocation failed\n", d->sbdma_eth->sbm_dev->name); return -ENOBUFS; } - sbdma_align_skb(sb_new, SMP_CACHE_BYTES, ETHER_ALIGN); + sbdma_align_skb(sb_new, SMP_CACHE_BYTES, NET_IP_ALIGN); } else { sb_new = sb; @@ -874,10 +874,10 @@ static int sbdma_add_rcvbuffer(struct sbmacdma *d, struct sk_buff *sb) * Do not interrupt per DMA transfer. */ dsc->dscr_a = virt_to_phys(sb_new->data) | - V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize+ETHER_ALIGN)) | 0; + V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize + NET_IP_ALIGN)) | 0; #else dsc->dscr_a = virt_to_phys(sb_new->data) | - V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize+ETHER_ALIGN)) | + V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize + NET_IP_ALIGN)) | M_DMA_DSCRA_INTERRUPT; #endif @@ -1032,18 +1032,19 @@ static void sbdma_emptyring(struct sbmacdma *d) * with sk_buffs * * Input parameters: - * d - DMA channel + * sc - softc structure + * d - DMA channel * * Return value: * nothing ********************************************************************* */ -static void sbdma_fillring(struct sbmacdma *d) +static void sbdma_fillring(struct sbmac_softc *sc, struct sbmacdma *d) { int idx; - for (idx = 0; idx < SBMAC_MAX_RXDESCR-1; idx++) { - if (sbdma_add_rcvbuffer(d,NULL) != 0) + for (idx = 0; idx < SBMAC_MAX_RXDESCR - 1; idx++) { + if (sbdma_add_rcvbuffer(sc, d, NULL) != 0) break; } } @@ -1159,10 +1160,11 @@ again: * packet and put it right back on the receive ring. */ - if (unlikely (sbdma_add_rcvbuffer(d,NULL) == - -ENOBUFS)) { + if (unlikely(sbdma_add_rcvbuffer(sc, d, NULL) == + -ENOBUFS)) { dev->stats.rx_dropped++; - sbdma_add_rcvbuffer(d,sb); /* re-add old buffer */ + /* Re-add old buffer */ + sbdma_add_rcvbuffer(sc, d, sb); /* No point in continuing at the moment */ printk(KERN_ERR "dropped packet (1)\n"); d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr); @@ -1212,7 +1214,7 @@ again: * put it back on the receive ring. */ dev->stats.rx_errors++; - sbdma_add_rcvbuffer(d,sb); + sbdma_add_rcvbuffer(sc, d, sb); } @@ -1570,7 +1572,7 @@ static void sbmac_channel_start(struct sbmac_softc *s) * Fill the receive ring */ - sbdma_fillring(&(s->sbm_rxdma)); + sbdma_fillring(s, &(s->sbm_rxdma)); /* * Turn on the rest of the bits in the enable register @@ -2312,13 +2314,6 @@ static int sbmac_init(struct platform_device *pldev, long long base) dev->dev_addr[i] = eaddr[i]; } - - /* - * Init packet size - */ - - sc->sbm_buffersize = ENET_PACKET_SIZE + SMP_CACHE_BYTES * 2 + ETHER_ALIGN; - /* * Initialize context (get pointers to registers and stuff), then * allocate the memory for the descriptor tables. -- cgit v1.2.3 From 5a0a92e67b5009a71e011658da04fb92dad8961f Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Sat, 17 May 2008 08:35:36 +0100 Subject: [SC92031] Using padto turned driver into an IPv6-only interface IPv4 would work with this driver only with static arp table entries, the patch reverts a padto introduced in commit 26a17b7bbb36a8552d531bc1ad08472fb5aa3007 sc92031: start transmit return value bugfix The padto does not work because the driver code evaluates `len' later on and there are cases where skb->len is not updated accordingly. This was observed with ARP frames (skb->len = 42 bytes, !skb_cloned(), skb_tailroom = 84 bytes). Then in skb_pad(), the first condition is true, where skb->len is not updated. As a consequence, the driver uses 42 bytes instead of the 60 bytes, and the ARP frame never makes it onto the wire. Signed-off-by: Gerrit Renker Signed-off-by: Jeff Garzik --- drivers/net/sc92031.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c index f64a860029b..b4b63805ee8 100644 --- a/drivers/net/sc92031.c +++ b/drivers/net/sc92031.c @@ -953,9 +953,6 @@ static int sc92031_start_xmit(struct sk_buff *skb, struct net_device *dev) unsigned entry; u32 tx_status; - if (skb_padto(skb, ETH_ZLEN)) - return NETDEV_TX_OK; - if (unlikely(skb->len > TX_BUF_SIZE)) { dev->stats.tx_dropped++; goto out; @@ -975,6 +972,11 @@ static int sc92031_start_xmit(struct sk_buff *skb, struct net_device *dev) skb_copy_and_csum_dev(skb, priv->tx_bufs + entry * TX_BUF_SIZE); len = skb->len; + if (unlikely(len < ETH_ZLEN)) { + memset(priv->tx_bufs + entry * TX_BUF_SIZE + len, + 0, ETH_ZLEN - len); + len = ETH_ZLEN; + } wmb(); -- cgit v1.2.3 From 940608be2e6117c17c19b203f7393ced4d02590a Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Sat, 17 May 2008 07:07:36 +0100 Subject: PHYLIB: Kconfig: Fix the dependency on S390 PHYLIB was first marked as BROKEN on S390, then the enclosing menu marked as non-S390, then the two dependencies merged with the conversion to menuconfig. Reduce to non-S390. Signed-off-by: Maciej W. Rozycki Signed-off-by: Jeff Garzik --- drivers/net/phy/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 6bf9e76b0a0..6eb2d31d1e3 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -5,7 +5,7 @@ menuconfig PHYLIB tristate "PHY Device support and infrastructure" depends on !S390 - depends on NET_ETHERNET && (BROKEN || !S390) + depends on NET_ETHERNET help Ethernet controllers are usually attached to PHY devices. This option provides infrastructure for -- cgit v1.2.3 From 7f80202bb964dd9c5b408af8100c7f0fd39a15c7 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Thu, 15 May 2008 17:00:21 -0500 Subject: ucc_geth: Fix arguments to dma map/unmap functions We were passing NULL as the device. When we actually start supporting more interesting memory configurations, this will break things, so we proactively are fixing the bug. Signed-off-by: Andy Fleming Signed-off-by: Jeff Garzik --- drivers/net/ucc_geth.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index ca0bdac07a7..fb0b918e5cc 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -237,7 +237,7 @@ static struct sk_buff *get_new_skb(struct ucc_geth_private *ugeth, skb->dev = ugeth->dev; out_be32(&((struct qe_bd __iomem *)bd)->buf, - dma_map_single(NULL, + dma_map_single(&ugeth->dev->dev, skb->data, ugeth->ug_info->uf_info.max_rx_buf_length + UCC_GETH_RX_DATA_BUF_ALIGNMENT, @@ -2158,7 +2158,7 @@ static void ucc_geth_memclean(struct ucc_geth_private *ugeth) continue; for (j = 0; j < ugeth->ug_info->bdRingLenTx[i]; j++) { if (ugeth->tx_skbuff[i][j]) { - dma_unmap_single(NULL, + dma_unmap_single(&ugeth->dev->dev, in_be32(&((struct qe_bd __iomem *)bd)->buf), (in_be32((u32 __iomem *)bd) & BD_LENGTH_MASK), @@ -2186,7 +2186,7 @@ static void ucc_geth_memclean(struct ucc_geth_private *ugeth) bd = ugeth->p_rx_bd_ring[i]; for (j = 0; j < ugeth->ug_info->bdRingLenRx[i]; j++) { if (ugeth->rx_skbuff[i][j]) { - dma_unmap_single(NULL, + dma_unmap_single(&ugeth->dev->dev, in_be32(&((struct qe_bd __iomem *)bd)->buf), ugeth->ug_info-> uf_info.max_rx_buf_length + @@ -3406,7 +3406,8 @@ static int ucc_geth_start_xmit(struct sk_buff *skb, struct net_device *dev) /* set up the buffer descriptor */ out_be32(&((struct qe_bd __iomem *)bd)->buf, - dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE)); + dma_map_single(&ugeth->dev->dev, skb->data, + skb->len, DMA_TO_DEVICE)); /* printk(KERN_DEBUG"skb->data is 0x%x\n",skb->data); */ -- cgit v1.2.3 From 7fa0cba330af3a24f43ac85e14b0b5fed557cdab Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Fri, 16 May 2008 23:04:51 +0400 Subject: uli526x: add support for netpoll This patch adds netpoll support for the uli526x ethernet driver -- simply call the interrupt handler for polling. To do this without disable_irq()/enable_irq() pair we should fully protect the handler. Luckily, it's already using irqsave spinlock, the only unprotected place is interrupts re-enabling write. It was safe to re-enable interrupts without holding the spinlock, but with netpoll possibility now it doesn't seem so. Patch was tested using netconsole and KGDBoE. Signed-off-by: Anton Vorontsov Signed-off-by: Jeff Garzik --- drivers/net/tulip/uli526x.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c index 2511ca7a12a..e9e62862163 100644 --- a/drivers/net/tulip/uli526x.c +++ b/drivers/net/tulip/uli526x.c @@ -225,6 +225,9 @@ static void uli526x_set_filter_mode(struct net_device *); static const struct ethtool_ops netdev_ethtool_ops; static u16 read_srom_word(long, int); static irqreturn_t uli526x_interrupt(int, void *); +#ifdef CONFIG_NET_POLL_CONTROLLER +static void uli526x_poll(struct net_device *dev); +#endif static void uli526x_descriptor_init(struct uli526x_board_info *, unsigned long); static void allocate_rx_buffer(struct uli526x_board_info *); static void update_cr6(u32, unsigned long); @@ -339,6 +342,9 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev, dev->get_stats = &uli526x_get_stats; dev->set_multicast_list = &uli526x_set_filter_mode; dev->ethtool_ops = &netdev_ethtool_ops; +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = &uli526x_poll; +#endif spin_lock_init(&db->lock); @@ -681,8 +687,9 @@ static irqreturn_t uli526x_interrupt(int irq, void *dev_id) db->cr5_data = inl(ioaddr + DCR5); outl(db->cr5_data, ioaddr + DCR5); if ( !(db->cr5_data & 0x180c1) ) { - spin_unlock_irqrestore(&db->lock, flags); + /* Restore CR7 to enable interrupt mask */ outl(db->cr7_data, ioaddr + DCR7); + spin_unlock_irqrestore(&db->lock, flags); return IRQ_HANDLED; } @@ -715,6 +722,13 @@ static irqreturn_t uli526x_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } +#ifdef CONFIG_NET_POLL_CONTROLLER +static void uli526x_poll(struct net_device *dev) +{ + /* ISR grabs the irqsave lock, so this should be safe */ + uli526x_interrupt(dev->irq, dev); +} +#endif /* * Free TX resource after TX complete -- cgit v1.2.3 From 3d60efb55f634e200fd99e0960a8e099fb38446a Mon Sep 17 00:00:00 2001 From: Aurelien Nephtali Date: Wed, 14 May 2008 17:04:13 -0700 Subject: net/usb: add support for Apple USB Ethernet Adapter Add support for Apple USB Ethernet Adapter. http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?nplm=MB442Z/A Signed-off-by: Aurelien Nephtali Acked-by: Greg KH Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/usb/asix.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c index dc6f097062d..37ecf845edf 100644 --- a/drivers/net/usb/asix.c +++ b/drivers/net/usb/asix.c @@ -1440,6 +1440,10 @@ static const struct usb_device_id products [] = { // Belkin F5D5055 USB_DEVICE(0x050d, 0x5055), .driver_info = (unsigned long) &ax88178_info, +}, { + // Apple USB Ethernet Adapter + USB_DEVICE(0x05ac, 0x1402), + .driver_info = (unsigned long) &ax88772_info, }, { }, // END }; -- cgit v1.2.3 From f47e81fc36371a2f5e2b9792b6a8c56a4564ebbe Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Thu, 1 May 2008 18:03:11 -0500 Subject: e1000e: use resource_size_t, not unsigned long, for phys addrs The use of unsigned long causes the driver to fail on 32-bit systems which support 64-bit resources. Signed-off-by: Becky Bruce Signed-off-by: Jeff Garzik --- drivers/net/e1000e/netdev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 8cbb40f3a50..cab1835173c 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -4201,8 +4201,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev, struct e1000_adapter *adapter; struct e1000_hw *hw; const struct e1000_info *ei = e1000_info_tbl[ent->driver_data]; - unsigned long mmio_start, mmio_len; - unsigned long flash_start, flash_len; + resource_size_t mmio_start, mmio_len; + resource_size_t flash_start, flash_len; static int cards_found; int i, err, pci_using_dac; -- cgit v1.2.3 From f917d58031fce6dfd7cea71259ea6a2b663ec813 Mon Sep 17 00:00:00 2001 From: Matteo Croce Date: Wed, 14 May 2008 00:58:32 +0200 Subject: cpmac bugfixes and enhancements * Resolve some locking issues using atomic_inc/atomic_dec * move status code in cpmac_check_status * unmark the BROKEN flag in Kconfig * move code which should have been in platform code in arch/mips/ar7/platform.c * fixed an IRQ storm which lets the kernel hang * fixed a double call to netif_start_queue which causes a kernel panic * don't fail to register the PHY, works on many devices now Signed-off-by: Matteo Croce Signed-off-by: Felix Fietkau Signed-off-by: Jeff Garzik --- drivers/net/cpmac.c | 234 ++++++++++++++++++++++++++++++++++++++++------------ 1 file changed, 179 insertions(+), 55 deletions(-) (limited to 'drivers') diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c index 2b5740b3d18..7f3f62e1b11 100644 --- a/drivers/net/cpmac.c +++ b/drivers/net/cpmac.c @@ -38,6 +38,7 @@ #include #include #include +#include MODULE_AUTHOR("Eugene Konev "); MODULE_DESCRIPTION("TI AR7 ethernet driver (CPMAC)"); @@ -187,6 +188,7 @@ struct cpmac_desc { #define CPMAC_EOQ 0x1000 struct sk_buff *skb; struct cpmac_desc *next; + struct cpmac_desc *prev; dma_addr_t mapping; dma_addr_t data_mapping; }; @@ -208,6 +210,7 @@ struct cpmac_priv { struct work_struct reset_work; struct platform_device *pdev; struct napi_struct napi; + atomic_t reset_pending; }; static irqreturn_t cpmac_irq(int, void *); @@ -241,6 +244,16 @@ static void cpmac_dump_desc(struct net_device *dev, struct cpmac_desc *desc) printk("\n"); } +static void cpmac_dump_all_desc(struct net_device *dev) +{ + struct cpmac_priv *priv = netdev_priv(dev); + struct cpmac_desc *dump = priv->rx_head; + do { + cpmac_dump_desc(dev, dump); + dump = dump->next; + } while (dump != priv->rx_head); +} + static void cpmac_dump_skb(struct net_device *dev, struct sk_buff *skb) { int i; @@ -412,21 +425,42 @@ static struct sk_buff *cpmac_rx_one(struct cpmac_priv *priv, static int cpmac_poll(struct napi_struct *napi, int budget) { struct sk_buff *skb; - struct cpmac_desc *desc; - int received = 0; + struct cpmac_desc *desc, *restart; struct cpmac_priv *priv = container_of(napi, struct cpmac_priv, napi); + int received = 0, processed = 0; spin_lock(&priv->rx_lock); if (unlikely(!priv->rx_head)) { if (netif_msg_rx_err(priv) && net_ratelimit()) printk(KERN_WARNING "%s: rx: polling, but no queue\n", priv->dev->name); + spin_unlock(&priv->rx_lock); netif_rx_complete(priv->dev, napi); return 0; } desc = priv->rx_head; + restart = NULL; while (((desc->dataflags & CPMAC_OWN) == 0) && (received < budget)) { + processed++; + + if ((desc->dataflags & CPMAC_EOQ) != 0) { + /* The last update to eoq->hw_next didn't happen + * soon enough, and the receiver stopped here. + *Remember this descriptor so we can restart + * the receiver after freeing some space. + */ + if (unlikely(restart)) { + if (netif_msg_rx_err(priv)) + printk(KERN_ERR "%s: poll found a" + " duplicate EOQ: %p and %p\n", + priv->dev->name, restart, desc); + goto fatal_error; + } + + restart = desc->next; + } + skb = cpmac_rx_one(priv, desc); if (likely(skb)) { netif_receive_skb(skb); @@ -435,19 +469,90 @@ static int cpmac_poll(struct napi_struct *napi, int budget) desc = desc->next; } + if (desc != priv->rx_head) { + /* We freed some buffers, but not the whole ring, + * add what we did free to the rx list */ + desc->prev->hw_next = (u32)0; + priv->rx_head->prev->hw_next = priv->rx_head->mapping; + } + + /* Optimization: If we did not actually process an EOQ (perhaps because + * of quota limits), check to see if the tail of the queue has EOQ set. + * We should immediately restart in that case so that the receiver can + * restart and run in parallel with more packet processing. + * This lets us handle slightly larger bursts before running + * out of ring space (assuming dev->weight < ring_size) */ + + if (!restart && + (priv->rx_head->prev->dataflags & (CPMAC_OWN|CPMAC_EOQ)) + == CPMAC_EOQ && + (priv->rx_head->dataflags & CPMAC_OWN) != 0) { + /* reset EOQ so the poll loop (above) doesn't try to + * restart this when it eventually gets to this descriptor. + */ + priv->rx_head->prev->dataflags &= ~CPMAC_EOQ; + restart = priv->rx_head; + } + + if (restart) { + priv->dev->stats.rx_errors++; + priv->dev->stats.rx_fifo_errors++; + if (netif_msg_rx_err(priv) && net_ratelimit()) + printk(KERN_WARNING "%s: rx dma ring overrun\n", + priv->dev->name); + + if (unlikely((restart->dataflags & CPMAC_OWN) == 0)) { + if (netif_msg_drv(priv)) + printk(KERN_ERR "%s: cpmac_poll is trying to " + "restart rx from a descriptor that's " + "not free: %p\n", + priv->dev->name, restart); + goto fatal_error; + } + + cpmac_write(priv->regs, CPMAC_RX_PTR(0), restart->mapping); + } + priv->rx_head = desc; spin_unlock(&priv->rx_lock); if (unlikely(netif_msg_rx_status(priv))) printk(KERN_DEBUG "%s: poll processed %d packets\n", priv->dev->name, received); - if (desc->dataflags & CPMAC_OWN) { + if (processed == 0) { + /* we ran out of packets to read, + * revert to interrupt-driven mode */ netif_rx_complete(priv->dev, napi); - cpmac_write(priv->regs, CPMAC_RX_PTR(0), (u32)desc->mapping); cpmac_write(priv->regs, CPMAC_RX_INT_ENABLE, 1); return 0; } return 1; + +fatal_error: + /* Something went horribly wrong. + * Reset hardware to try to recover rather than wedging. */ + + if (netif_msg_drv(priv)) { + printk(KERN_ERR "%s: cpmac_poll is confused. " + "Resetting hardware\n", priv->dev->name); + cpmac_dump_all_desc(priv->dev); + printk(KERN_DEBUG "%s: RX_PTR(0)=0x%08x RX_ACK(0)=0x%08x\n", + priv->dev->name, + cpmac_read(priv->regs, CPMAC_RX_PTR(0)), + cpmac_read(priv->regs, CPMAC_RX_ACK(0))); + } + + spin_unlock(&priv->rx_lock); + netif_rx_complete(priv->dev, napi); + netif_stop_queue(priv->dev); + napi_disable(&priv->napi); + + atomic_inc(&priv->reset_pending); + cpmac_hw_stop(priv->dev); + if (!schedule_work(&priv->reset_work)) + atomic_dec(&priv->reset_pending); + return 0; + } static int cpmac_start_xmit(struct sk_buff *skb, struct net_device *dev) @@ -456,6 +561,9 @@ static int cpmac_start_xmit(struct sk_buff *skb, struct net_device *dev) struct cpmac_desc *desc; struct cpmac_priv *priv = netdev_priv(dev); + if (unlikely(atomic_read(&priv->reset_pending))) + return NETDEV_TX_BUSY; + if (unlikely(skb_padto(skb, ETH_ZLEN))) return NETDEV_TX_OK; @@ -621,8 +729,10 @@ static void cpmac_clear_rx(struct net_device *dev) desc->dataflags = CPMAC_OWN; dev->stats.rx_dropped++; } + desc->hw_next = desc->next->mapping; desc = desc->next; } + priv->rx_head->prev->hw_next = 0; } static void cpmac_clear_tx(struct net_device *dev) @@ -635,14 +745,14 @@ static void cpmac_clear_tx(struct net_device *dev) priv->desc_ring[i].dataflags = 0; if (priv->desc_ring[i].skb) { dev_kfree_skb_any(priv->desc_ring[i].skb); - if (netif_subqueue_stopped(dev, i)) - netif_wake_subqueue(dev, i); + priv->desc_ring[i].skb = NULL; } } } static void cpmac_hw_error(struct work_struct *work) { + int i; struct cpmac_priv *priv = container_of(work, struct cpmac_priv, reset_work); @@ -651,8 +761,48 @@ static void cpmac_hw_error(struct work_struct *work) spin_unlock(&priv->rx_lock); cpmac_clear_tx(priv->dev); cpmac_hw_start(priv->dev); - napi_enable(&priv->napi); - netif_start_queue(priv->dev); + barrier(); + atomic_dec(&priv->reset_pending); + + for (i = 0; i < CPMAC_QUEUES; i++) + netif_wake_subqueue(priv->dev, i); + netif_wake_queue(priv->dev); + cpmac_write(priv->regs, CPMAC_MAC_INT_ENABLE, 3); +} + +static void cpmac_check_status(struct net_device *dev) +{ + struct cpmac_priv *priv = netdev_priv(dev); + + u32 macstatus = cpmac_read(priv->regs, CPMAC_MAC_STATUS); + int rx_channel = (macstatus >> 8) & 7; + int rx_code = (macstatus >> 12) & 15; + int tx_channel = (macstatus >> 16) & 7; + int tx_code = (macstatus >> 20) & 15; + + if (rx_code || tx_code) { + if (netif_msg_drv(priv) && net_ratelimit()) { + /* Can't find any documentation on what these + *error codes actually are. So just log them and hope.. + */ + if (rx_code) + printk(KERN_WARNING "%s: host error %d on rx " + "channel %d (macstatus %08x), resetting\n", + dev->name, rx_code, rx_channel, macstatus); + if (tx_code) + printk(KERN_WARNING "%s: host error %d on tx " + "channel %d (macstatus %08x), resetting\n", + dev->name, tx_code, tx_channel, macstatus); + } + + netif_stop_queue(dev); + cpmac_hw_stop(dev); + if (schedule_work(&priv->reset_work)) + atomic_inc(&priv->reset_pending); + if (unlikely(netif_msg_hw(priv))) + cpmac_dump_regs(dev); + } + cpmac_write(priv->regs, CPMAC_MAC_INT_CLEAR, 0xff); } static irqreturn_t cpmac_irq(int irq, void *dev_id) @@ -683,49 +833,32 @@ static irqreturn_t cpmac_irq(int irq, void *dev_id) cpmac_write(priv->regs, CPMAC_MAC_EOI_VECTOR, 0); - if (unlikely(status & (MAC_INT_HOST | MAC_INT_STATUS))) { - if (netif_msg_drv(priv) && net_ratelimit()) - printk(KERN_ERR "%s: hw error, resetting...\n", - dev->name); - netif_stop_queue(dev); - napi_disable(&priv->napi); - cpmac_hw_stop(dev); - schedule_work(&priv->reset_work); - if (unlikely(netif_msg_hw(priv))) - cpmac_dump_regs(dev); - } + if (unlikely(status & (MAC_INT_HOST | MAC_INT_STATUS))) + cpmac_check_status(dev); return IRQ_HANDLED; } static void cpmac_tx_timeout(struct net_device *dev) { - struct cpmac_priv *priv = netdev_priv(dev); int i; + struct cpmac_priv *priv = netdev_priv(dev); spin_lock(&priv->lock); dev->stats.tx_errors++; spin_unlock(&priv->lock); if (netif_msg_tx_err(priv) && net_ratelimit()) printk(KERN_WARNING "%s: transmit timeout\n", dev->name); - /* - * FIXME: waking up random queue is not the best thing to - * do... on the other hand why we got here at all? - */ -#ifdef CONFIG_NETDEVICES_MULTIQUEUE + + atomic_inc(&priv->reset_pending); + barrier(); + cpmac_clear_tx(dev); + barrier(); + atomic_dec(&priv->reset_pending); + + netif_wake_queue(priv->dev); for (i = 0; i < CPMAC_QUEUES; i++) - if (priv->desc_ring[i].skb) { - priv->desc_ring[i].dataflags = 0; - dev_kfree_skb_any(priv->desc_ring[i].skb); - netif_wake_subqueue(dev, i); - break; - } -#else - priv->desc_ring[0].dataflags = 0; - if (priv->desc_ring[0].skb) - dev_kfree_skb_any(priv->desc_ring[0].skb); - netif_wake_queue(dev); -#endif + netif_wake_subqueue(dev, i); } static int cpmac_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) @@ -901,9 +1034,12 @@ static int cpmac_open(struct net_device *dev) desc->buflen = CPMAC_SKB_SIZE; desc->dataflags = CPMAC_OWN; desc->next = &priv->rx_head[(i + 1) % priv->ring_size]; + desc->next->prev = desc; desc->hw_next = (u32)desc->next->mapping; } + priv->rx_head->prev->hw_next = (u32)0; + if ((res = request_irq(dev->irq, cpmac_irq, IRQF_SHARED, dev->name, dev))) { if (netif_msg_drv(priv)) @@ -912,6 +1048,7 @@ static int cpmac_open(struct net_device *dev) goto fail_irq; } + atomic_set(&priv->reset_pending, 0); INIT_WORK(&priv->reset_work, cpmac_hw_error); cpmac_hw_start(dev); @@ -1007,21 +1144,10 @@ static int __devinit cpmac_probe(struct platform_device *pdev) if (phy_id == PHY_MAX_ADDR) { if (external_switch || dumb_switch) { - struct fixed_phy_status status = {}; - - /* - * FIXME: this should be in the platform code! - * Since there is not platform code at all (that is, - * no mainline users of that driver), place it here - * for now. - */ - phy_id = 0; - status.link = 1; - status.duplex = 1; - status.speed = 100; - fixed_phy_add(PHY_POLL, phy_id, &status); + mdio_bus_id = 0; /* fixed phys bus */ + phy_id = pdev->id; } else { - printk(KERN_ERR "cpmac: no PHY present\n"); + dev_err(&pdev->dev, "no PHY present\n"); return -ENODEV; } } @@ -1064,10 +1190,8 @@ static int __devinit cpmac_probe(struct platform_device *pdev) priv->msg_enable = netif_msg_init(debug_level, 0xff); memcpy(dev->dev_addr, pdata->dev_addr, sizeof(dev->dev_addr)); - snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id); - - priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link, 0, - PHY_INTERFACE_MODE_MII); + priv->phy = phy_connect(dev, cpmac_mii.phy_map[phy_id]->dev.bus_id, + &cpmac_adjust_link, 0, PHY_INTERFACE_MODE_MII); if (IS_ERR(priv->phy)) { if (netif_msg_drv(priv)) printk(KERN_ERR "%s: Could not attach to PHY\n", -- cgit v1.2.3 From 94a47f4161798c34bec7718768f72cf16bcfb4f0 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Mon, 12 May 2008 12:14:04 +0800 Subject: Blackfin EMAC Driver: Removed duplicated include Signed-off-by: Huang Weiyi Signed-off-by: Bryan Wu Signed-off-by: Jeff Garzik --- drivers/net/bfin_mac.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index 89c0018132e..41443435ab1 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include #include -- cgit v1.2.3 From d04455fba3777fa5c3963348be76510169bbf4df Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Mon, 12 May 2008 18:44:21 +0200 Subject: au1000_eth: remove useless check The lifespan of the device covers the request_irq .. free_irq interval. The cast of a void * pointer is not needed either. Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/au1000_eth.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c index 3634b5fd791..7023d77bf38 100644 --- a/drivers/net/au1000_eth.c +++ b/drivers/net/au1000_eth.c @@ -1239,12 +1239,7 @@ static int au1000_rx(struct net_device *dev) */ static irqreturn_t au1000_interrupt(int irq, void *dev_id) { - struct net_device *dev = (struct net_device *) dev_id; - - if (dev == NULL) { - printk(KERN_ERR "%s: isr: null dev ptr\n", dev->name); - return IRQ_RETVAL(1); - } + struct net_device *dev = dev_id; /* Handle RX interrupts first to minimize chance of overrun */ -- cgit v1.2.3 From 25c16fffa8ed82d3ef31980d76ff95d3c6430f00 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 12 May 2008 14:38:17 -0700 Subject: drivers/net/ehea - remove unnecessary memset after kzalloc Signed-off-by: Joe Perches Signed-off-by: Jeff Garzik --- drivers/net/ehea/ehea_main.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index 8645224da1c..287a6191873 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -2213,8 +2213,6 @@ static void ehea_vlan_rx_register(struct net_device *dev, goto out; } - memset(cb1->vlan_filter, 0, sizeof(cb1->vlan_filter)); - hret = ehea_h_modify_ehea_port(adapter->handle, port->logical_port_id, H_PORT_CB1, H_PORT_CB1_ALL, cb1); if (hret != H_SUCCESS) -- cgit v1.2.3 From ac731ab66960547c33a4e2c504419389ae747067 Mon Sep 17 00:00:00 2001 From: Sreenivasa Honnur Date: Mon, 12 May 2008 13:41:32 -0400 Subject: S2io: Move all the transmit completions to a single msi-x (alarm) vector - Move all the transmit completions to a single msi-x (alarm) vector. - Enable the continuous timer interrupt for only one transmit fifo. Signed-off-by: Santosh Rastapur Signed-off-by: Ramkrishna Vepa Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 170 ++++++++++++++++++++++++++++++++--------------------- drivers/net/s2io.h | 5 +- 2 files changed, 105 insertions(+), 70 deletions(-) (limited to 'drivers') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 0f3d230a320..e161a847c53 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -1220,15 +1220,33 @@ static int init_tti(struct s2io_nic *nic, int link) TTI_DATA1_MEM_TX_URNG_B(0x10) | TTI_DATA1_MEM_TX_URNG_C(0x30) | TTI_DATA1_MEM_TX_TIMER_AC_EN; - - if (use_continuous_tx_intrs && (link == LINK_UP)) - val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN; + if (i == 0) + if (use_continuous_tx_intrs && (link == LINK_UP)) + val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN; writeq(val64, &bar0->tti_data1_mem); - val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) | - TTI_DATA2_MEM_TX_UFC_B(0x20) | - TTI_DATA2_MEM_TX_UFC_C(0x40) | - TTI_DATA2_MEM_TX_UFC_D(0x80); + if (nic->config.intr_type == MSI_X) { + val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) | + TTI_DATA2_MEM_TX_UFC_B(0x100) | + TTI_DATA2_MEM_TX_UFC_C(0x200) | + TTI_DATA2_MEM_TX_UFC_D(0x300); + } else { + if ((nic->config.tx_steering_type == + TX_DEFAULT_STEERING) && + (config->tx_fifo_num > 1) && + (i >= nic->udp_fifo_idx) && + (i < (nic->udp_fifo_idx + + nic->total_udp_fifos))) + val64 = TTI_DATA2_MEM_TX_UFC_A(0x50) | + TTI_DATA2_MEM_TX_UFC_B(0x80) | + TTI_DATA2_MEM_TX_UFC_C(0x100) | + TTI_DATA2_MEM_TX_UFC_D(0x120); + else + val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) | + TTI_DATA2_MEM_TX_UFC_B(0x20) | + TTI_DATA2_MEM_TX_UFC_C(0x40) | + TTI_DATA2_MEM_TX_UFC_D(0x80); + } writeq(val64, &bar0->tti_data2_mem); @@ -3771,7 +3789,7 @@ static void store_xmsi_data(struct s2io_nic *nic) static int s2io_enable_msi_x(struct s2io_nic *nic) { struct XENA_dev_config __iomem *bar0 = nic->bar0; - u64 tx_mat, rx_mat; + u64 rx_mat; u16 msi_control; /* Temp variable */ int ret, i, j, msix_indx = 1; @@ -3801,22 +3819,19 @@ static int s2io_enable_msi_x(struct s2io_nic *nic) nic->mac_control.stats_info->sw_stat.mem_allocated += (MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry)); - for (i=0; i< MAX_REQUESTED_MSI_X; i++) { + nic->entries[0].entry = 0; + nic->s2io_entries[0].entry = 0; + nic->s2io_entries[0].in_use = MSIX_FLG; + nic->s2io_entries[0].type = MSIX_ALARM_TYPE; + nic->s2io_entries[0].arg = &nic->mac_control.fifos; + + for (i = 1; i < MAX_REQUESTED_MSI_X; i++) { nic->entries[i].entry = i; nic->s2io_entries[i].entry = i; nic->s2io_entries[i].arg = NULL; nic->s2io_entries[i].in_use = 0; } - tx_mat = readq(&bar0->tx_mat0_n[0]); - for (i=0; iconfig.tx_fifo_num; i++, msix_indx++) { - tx_mat |= TX_MAT_SET(i, msix_indx); - nic->s2io_entries[msix_indx].arg = &nic->mac_control.fifos[i]; - nic->s2io_entries[msix_indx].type = MSIX_FIFO_TYPE; - nic->s2io_entries[msix_indx].in_use = MSIX_FLG; - } - writeq(tx_mat, &bar0->tx_mat0_n[0]); - rx_mat = readq(&bar0->rx_mat); for (j = 0; j < nic->config.rx_ring_num; j++, msix_indx++) { rx_mat |= RX_MAT_SET(j, msix_indx); @@ -4353,15 +4368,35 @@ static irqreturn_t s2io_msix_ring_handle(int irq, void *dev_id) static irqreturn_t s2io_msix_fifo_handle(int irq, void *dev_id) { - struct fifo_info *fifo = (struct fifo_info *)dev_id; - struct s2io_nic *sp = fifo->nic; + int i; + struct fifo_info *fifos = (struct fifo_info *)dev_id; + struct s2io_nic *sp = fifos->nic; + struct XENA_dev_config __iomem *bar0 = sp->bar0; + struct config_param *config = &sp->config; + u64 reason; - if (!is_s2io_card_up(sp)) + if (unlikely(!is_s2io_card_up(sp))) + return IRQ_NONE; + + reason = readq(&bar0->general_int_status); + if (unlikely(reason == S2IO_MINUS_ONE)) + /* Nothing much can be done. Get out */ return IRQ_HANDLED; - tx_intr_handler(fifo); + writeq(S2IO_MINUS_ONE, &bar0->general_int_mask); + + if (reason & GEN_INTR_TXTRAFFIC) + writeq(S2IO_MINUS_ONE, &bar0->tx_traffic_int); + + for (i = 0; i < config->tx_fifo_num; i++) + tx_intr_handler(&fifos[i]); + + writeq(sp->general_int_mask, &bar0->general_int_mask); + readl(&bar0->general_int_status); + return IRQ_HANDLED; } + static void s2io_txpic_intr_handle(struct s2io_nic *sp) { struct XENA_dev_config __iomem *bar0 = sp->bar0; @@ -6985,62 +7020,61 @@ static int s2io_add_isr(struct s2io_nic * sp) /* After proper initialization of H/W, register ISR */ if (sp->config.intr_type == MSI_X) { - int i, msix_tx_cnt=0,msix_rx_cnt=0; - - for (i=1; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) { - if (sp->s2io_entries[i].type == MSIX_FIFO_TYPE) { - sprintf(sp->desc[i], "%s:MSI-X-%d-TX", + int i, msix_rx_cnt = 0; + + for (i = 0; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) { + if (sp->s2io_entries[i].type == + MSIX_RING_TYPE) { + sprintf(sp->desc[i], "%s:MSI-X-%d-RX", + dev->name, i); + err = request_irq(sp->entries[i].vector, + s2io_msix_ring_handle, 0, + sp->desc[i], + sp->s2io_entries[i].arg); + } else if (sp->s2io_entries[i].type == + MSIX_ALARM_TYPE) { + sprintf(sp->desc[i], "%s:MSI-X-%d-TX", dev->name, i); - err = request_irq(sp->entries[i].vector, - s2io_msix_fifo_handle, 0, sp->desc[i], - sp->s2io_entries[i].arg); - /* If either data or addr is zero print it */ - if(!(sp->msix_info[i].addr && - sp->msix_info[i].data)) { - DBG_PRINT(ERR_DBG, "%s @ Addr:0x%llx " - "Data:0x%llx\n",sp->desc[i], - (unsigned long long) - sp->msix_info[i].addr, - (unsigned long long) - sp->msix_info[i].data); - } else { - msix_tx_cnt++; + err = request_irq(sp->entries[i].vector, + s2io_msix_fifo_handle, 0, + sp->desc[i], + sp->s2io_entries[i].arg); + } - } else { - sprintf(sp->desc[i], "%s:MSI-X-%d-RX", - dev->name, i); - err = request_irq(sp->entries[i].vector, - s2io_msix_ring_handle, 0, sp->desc[i], - sp->s2io_entries[i].arg); - /* If either data or addr is zero print it */ - if(!(sp->msix_info[i].addr && + /* if either data or addr is zero print it. */ + if (!(sp->msix_info[i].addr && sp->msix_info[i].data)) { - DBG_PRINT(ERR_DBG, "%s @ Addr:0x%llx " - "Data:0x%llx\n",sp->desc[i], + DBG_PRINT(ERR_DBG, + "%s @Addr:0x%llx Data:0x%llx\n", + sp->desc[i], (unsigned long long) sp->msix_info[i].addr, (unsigned long long) - sp->msix_info[i].data); - } else { + ntohl(sp->msix_info[i].data)); + } else msix_rx_cnt++; + if (err) { + remove_msix_isr(sp); + + DBG_PRINT(ERR_DBG, + "%s:MSI-X-%d registration " + "failed\n", dev->name, i); + + DBG_PRINT(ERR_DBG, + "%s: Defaulting to INTA\n", + dev->name); + sp->config.intr_type = INTA; + break; } - } - if (err) { - remove_msix_isr(sp); - DBG_PRINT(ERR_DBG,"%s:MSI-X-%d registration " - "failed\n", dev->name, i); - DBG_PRINT(ERR_DBG, "%s: defaulting to INTA\n", - dev->name); - sp->config.intr_type = INTA; - break; - } - sp->s2io_entries[i].in_use = MSIX_REGISTERED_SUCCESS; + sp->s2io_entries[i].in_use = + MSIX_REGISTERED_SUCCESS; + } if (!err) { - printk(KERN_INFO "MSI-X-TX %d entries enabled\n", - msix_tx_cnt); printk(KERN_INFO "MSI-X-RX %d entries enabled\n", - msix_rx_cnt); + --msix_rx_cnt); + DBG_PRINT(INFO_DBG, "MSI-X-TX entries enabled" + " through alarm vector\n"); } } if (sp->config.intr_type == INTA) { @@ -7218,7 +7252,7 @@ static int s2io_card_up(struct s2io_nic * sp) /* Enable select interrupts */ en_dis_err_alarms(sp, ENA_ALL_INTRS, ENABLE_INTRS); if (sp->config.intr_type != INTA) - en_dis_able_nic_intrs(sp, ENA_ALL_INTRS, DISABLE_INTRS); + en_dis_able_nic_intrs(sp, TX_TRAFFIC_INTR, ENABLE_INTRS); else { interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR; interruptible |= TX_PIC_INTR; diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index 0709ebae913..9a4b772f741 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -849,8 +849,8 @@ struct s2io_msix_entry void *arg; u8 type; -#define MSIX_FIFO_TYPE 1 -#define MSIX_RING_TYPE 2 +#define MSIX_ALARM_TYPE 1 +#define MSIX_RING_TYPE 2 u8 in_use; #define MSIX_REGISTERED_SUCCESS 0xAA @@ -982,6 +982,7 @@ struct s2io_nic { u16 lro_max_aggr_per_sess; volatile unsigned long state; u64 general_int_mask; + #define VPD_STRING_LEN 80 u8 product_name[VPD_STRING_LEN]; u8 serial_num[VPD_STRING_LEN]; -- cgit v1.2.3 From f61e0a3544be2f615a0af4aec71eb85a96bdbd62 Mon Sep 17 00:00:00 2001 From: Sreenivasa Honnur Date: Mon, 12 May 2008 13:42:17 -0400 Subject: S2io: Added napi support when MSIX is enabled. - Added napi support when MSIX is enabled. - Moved test_msi function from s2io_open to probe function. Signed-off-by: Sreenivasa Honnur Signed-off-by: Ramkrishna Vepa Signed-off-by: Jeff Garzik --- drivers/net/s2io-regs.h | 2 +- drivers/net/s2io.c | 327 ++++++++++++++++++++++++++++-------------------- drivers/net/s2io.h | 17 ++- 3 files changed, 205 insertions(+), 141 deletions(-) (limited to 'drivers') diff --git a/drivers/net/s2io-regs.h b/drivers/net/s2io-regs.h index 2109508c047..f8274f8941e 100644 --- a/drivers/net/s2io-regs.h +++ b/drivers/net/s2io-regs.h @@ -250,7 +250,7 @@ struct XENA_dev_config { u64 tx_mat0_n[0x8]; #define TX_MAT_SET(fifo, msi) vBIT(msi, (8 * fifo), 8) - u8 unused_1[0x8]; + u64 xmsi_mask_reg; u64 stat_byte_cnt; #define STAT_BC(n) vBIT(n,4,12) diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index e161a847c53..807fb8db8c4 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -2832,6 +2832,15 @@ static void free_rx_buffers(struct s2io_nic *sp) } } +static int s2io_chk_rx_buffers(struct ring_info *ring) +{ + if (fill_rx_buffers(ring) == -ENOMEM) { + DBG_PRINT(INFO_DBG, "%s:Out of memory", ring->dev->name); + DBG_PRINT(INFO_DBG, " in Rx Intr!!\n"); + } + return 0; +} + /** * s2io_poll - Rx interrupt handler for NAPI support * @napi : pointer to the napi structure. @@ -2845,57 +2854,72 @@ static void free_rx_buffers(struct s2io_nic *sp) * 0 on success and 1 if there are No Rx packets to be processed. */ -static int s2io_poll(struct napi_struct *napi, int budget) +static int s2io_poll_msix(struct napi_struct *napi, int budget) { - struct s2io_nic *nic = container_of(napi, struct s2io_nic, napi); - struct net_device *dev = nic->dev; - int pkt_cnt = 0, org_pkts_to_process; - struct mac_info *mac_control; + struct ring_info *ring = container_of(napi, struct ring_info, napi); + struct net_device *dev = ring->dev; struct config_param *config; + struct mac_info *mac_control; + int pkts_processed = 0; + u8 *addr = NULL, val8 = 0; + struct s2io_nic *nic = dev->priv; struct XENA_dev_config __iomem *bar0 = nic->bar0; - int i; + int budget_org = budget; - mac_control = &nic->mac_control; config = &nic->config; + mac_control = &nic->mac_control; - nic->pkts_to_process = budget; - org_pkts_to_process = nic->pkts_to_process; + if (unlikely(!is_s2io_card_up(nic))) + return 0; - writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int); - readl(&bar0->rx_traffic_int); + pkts_processed = rx_intr_handler(ring, budget); + s2io_chk_rx_buffers(ring); - for (i = 0; i < config->rx_ring_num; i++) { - rx_intr_handler(&mac_control->rings[i]); - pkt_cnt = org_pkts_to_process - nic->pkts_to_process; - if (!nic->pkts_to_process) { - /* Quota for the current iteration has been met */ - goto no_rx; - } + if (pkts_processed < budget_org) { + netif_rx_complete(dev, napi); + /*Re Enable MSI-Rx Vector*/ + addr = (u8 *)&bar0->xmsi_mask_reg; + addr += 7 - ring->ring_no; + val8 = (ring->ring_no == 0) ? 0x3f : 0xbf; + writeb(val8, addr); + val8 = readb(addr); } + return pkts_processed; +} +static int s2io_poll_inta(struct napi_struct *napi, int budget) +{ + struct s2io_nic *nic = container_of(napi, struct s2io_nic, napi); + struct ring_info *ring; + struct net_device *dev = nic->dev; + struct config_param *config; + struct mac_info *mac_control; + int pkts_processed = 0; + int ring_pkts_processed, i; + struct XENA_dev_config __iomem *bar0 = nic->bar0; + int budget_org = budget; - netif_rx_complete(dev, napi); + config = &nic->config; + mac_control = &nic->mac_control; - for (i = 0; i < config->rx_ring_num; i++) { - if (fill_rx_buffers(&mac_control->rings[i]) == -ENOMEM) { - DBG_PRINT(INFO_DBG, "%s:Out of memory", dev->name); - DBG_PRINT(INFO_DBG, " in Rx Poll!!\n"); - break; - } - } - /* Re enable the Rx interrupts. */ - writeq(0x0, &bar0->rx_traffic_mask); - readl(&bar0->rx_traffic_mask); - return pkt_cnt; + if (unlikely(!is_s2io_card_up(nic))) + return 0; -no_rx: for (i = 0; i < config->rx_ring_num; i++) { - if (fill_rx_buffers(&mac_control->rings[i]) == -ENOMEM) { - DBG_PRINT(INFO_DBG, "%s:Out of memory", dev->name); - DBG_PRINT(INFO_DBG, " in Rx Poll!!\n"); + ring = &mac_control->rings[i]; + ring_pkts_processed = rx_intr_handler(ring, budget); + s2io_chk_rx_buffers(ring); + pkts_processed += ring_pkts_processed; + budget -= ring_pkts_processed; + if (budget <= 0) break; - } } - return pkt_cnt; + if (pkts_processed < budget_org) { + netif_rx_complete(dev, napi); + /* Re enable the Rx interrupts for the ring */ + writeq(0, &bar0->rx_traffic_mask); + readl(&bar0->rx_traffic_mask); + } + return pkts_processed; } #ifdef CONFIG_NET_POLL_CONTROLLER @@ -2937,7 +2961,7 @@ static void s2io_netpoll(struct net_device *dev) /* check for received packet and indicate up to network */ for (i = 0; i < config->rx_ring_num; i++) - rx_intr_handler(&mac_control->rings[i]); + rx_intr_handler(&mac_control->rings[i], 0); for (i = 0; i < config->rx_ring_num; i++) { if (fill_rx_buffers(&mac_control->rings[i]) == -ENOMEM) { @@ -2953,7 +2977,8 @@ static void s2io_netpoll(struct net_device *dev) /** * rx_intr_handler - Rx interrupt handler - * @nic: device private variable. + * @ring_info: per ring structure. + * @budget: budget for napi processing. * Description: * If the interrupt is because of a received frame or if the * receive ring contains fresh as yet un-processed frames,this function is @@ -2961,15 +2986,15 @@ static void s2io_netpoll(struct net_device *dev) * stopped and sends the skb to the OSM's Rx handler and then increments * the offset. * Return Value: - * NONE. + * No. of napi packets processed. */ -static void rx_intr_handler(struct ring_info *ring_data) +static int rx_intr_handler(struct ring_info *ring_data, int budget) { int get_block, put_block; struct rx_curr_get_info get_info, put_info; struct RxD_t *rxdp; struct sk_buff *skb; - int pkt_cnt = 0; + int pkt_cnt = 0, napi_pkts = 0; int i; struct RxD1* rxdp1; struct RxD3* rxdp3; @@ -2996,7 +3021,7 @@ static void rx_intr_handler(struct ring_info *ring_data) DBG_PRINT(ERR_DBG, "%s: The skb is ", ring_data->dev->name); DBG_PRINT(ERR_DBG, "Null in Rx Intr\n"); - return; + return 0; } if (ring_data->rxd_mode == RXD_MODE_1) { rxdp1 = (struct RxD1*)rxdp; @@ -3033,9 +3058,10 @@ static void rx_intr_handler(struct ring_info *ring_data) rxdp = ring_data->rx_blocks[get_block].block_virt_addr; } - if(ring_data->nic->config.napi){ - ring_data->nic->pkts_to_process -= 1; - if (!ring_data->nic->pkts_to_process) + if (ring_data->nic->config.napi) { + budget--; + napi_pkts++; + if (!budget) break; } pkt_cnt++; @@ -3053,6 +3079,7 @@ static void rx_intr_handler(struct ring_info *ring_data) } } } + return(napi_pkts); } /** @@ -3749,14 +3776,19 @@ static void restore_xmsi_data(struct s2io_nic *nic) { struct XENA_dev_config __iomem *bar0 = nic->bar0; u64 val64; - int i; + int i, msix_index; + + + if (nic->device_type == XFRAME_I_DEVICE) + return; for (i=0; i < MAX_REQUESTED_MSI_X; i++) { + msix_index = (i) ? ((i-1) * 8 + 1): 0; writeq(nic->msix_info[i].addr, &bar0->xmsi_address); writeq(nic->msix_info[i].data, &bar0->xmsi_data); - val64 = (s2BIT(7) | s2BIT(15) | vBIT(i, 26, 6)); + val64 = (s2BIT(7) | s2BIT(15) | vBIT(msix_index, 26, 6)); writeq(val64, &bar0->xmsi_access); - if (wait_for_msix_trans(nic, i)) { + if (wait_for_msix_trans(nic, msix_index)) { DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__); continue; } @@ -3767,13 +3799,17 @@ static void store_xmsi_data(struct s2io_nic *nic) { struct XENA_dev_config __iomem *bar0 = nic->bar0; u64 val64, addr, data; - int i; + int i, msix_index; + + if (nic->device_type == XFRAME_I_DEVICE) + return; /* Store and display */ for (i=0; i < MAX_REQUESTED_MSI_X; i++) { - val64 = (s2BIT(15) | vBIT(i, 26, 6)); + msix_index = (i) ? ((i-1) * 8 + 1): 0; + val64 = (s2BIT(15) | vBIT(msix_index, 26, 6)); writeq(val64, &bar0->xmsi_access); - if (wait_for_msix_trans(nic, i)) { + if (wait_for_msix_trans(nic, msix_index)) { DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__); continue; } @@ -3793,7 +3829,7 @@ static int s2io_enable_msi_x(struct s2io_nic *nic) u16 msi_control; /* Temp variable */ int ret, i, j, msix_indx = 1; - nic->entries = kcalloc(MAX_REQUESTED_MSI_X, sizeof(struct msix_entry), + nic->entries = kmalloc(nic->num_entries * sizeof(struct msix_entry), GFP_KERNEL); if (!nic->entries) { DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n", \ @@ -3802,10 +3838,12 @@ static int s2io_enable_msi_x(struct s2io_nic *nic) return -ENOMEM; } nic->mac_control.stats_info->sw_stat.mem_allocated - += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry)); + += (nic->num_entries * sizeof(struct msix_entry)); + + memset(nic->entries, 0, nic->num_entries * sizeof(struct msix_entry)); nic->s2io_entries = - kcalloc(MAX_REQUESTED_MSI_X, sizeof(struct s2io_msix_entry), + kmalloc(nic->num_entries * sizeof(struct s2io_msix_entry), GFP_KERNEL); if (!nic->s2io_entries) { DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n", @@ -3813,11 +3851,13 @@ static int s2io_enable_msi_x(struct s2io_nic *nic) nic->mac_control.stats_info->sw_stat.mem_alloc_fail_cnt++; kfree(nic->entries); nic->mac_control.stats_info->sw_stat.mem_freed - += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry)); + += (nic->num_entries * sizeof(struct msix_entry)); return -ENOMEM; } nic->mac_control.stats_info->sw_stat.mem_allocated - += (MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry)); + += (nic->num_entries * sizeof(struct s2io_msix_entry)); + memset(nic->s2io_entries, 0, + nic->num_entries * sizeof(struct s2io_msix_entry)); nic->entries[0].entry = 0; nic->s2io_entries[0].entry = 0; @@ -3825,45 +3865,38 @@ static int s2io_enable_msi_x(struct s2io_nic *nic) nic->s2io_entries[0].type = MSIX_ALARM_TYPE; nic->s2io_entries[0].arg = &nic->mac_control.fifos; - for (i = 1; i < MAX_REQUESTED_MSI_X; i++) { - nic->entries[i].entry = i; - nic->s2io_entries[i].entry = i; + for (i = 1; i < nic->num_entries; i++) { + nic->entries[i].entry = ((i - 1) * 8) + 1; + nic->s2io_entries[i].entry = ((i - 1) * 8) + 1; nic->s2io_entries[i].arg = NULL; nic->s2io_entries[i].in_use = 0; } rx_mat = readq(&bar0->rx_mat); - for (j = 0; j < nic->config.rx_ring_num; j++, msix_indx++) { + for (j = 0; j < nic->config.rx_ring_num; j++) { rx_mat |= RX_MAT_SET(j, msix_indx); - nic->s2io_entries[msix_indx].arg - = &nic->mac_control.rings[j]; - nic->s2io_entries[msix_indx].type = MSIX_RING_TYPE; - nic->s2io_entries[msix_indx].in_use = MSIX_FLG; + nic->s2io_entries[j+1].arg = &nic->mac_control.rings[j]; + nic->s2io_entries[j+1].type = MSIX_RING_TYPE; + nic->s2io_entries[j+1].in_use = MSIX_FLG; + msix_indx += 8; } writeq(rx_mat, &bar0->rx_mat); + readq(&bar0->rx_mat); - nic->avail_msix_vectors = 0; - ret = pci_enable_msix(nic->pdev, nic->entries, MAX_REQUESTED_MSI_X); + ret = pci_enable_msix(nic->pdev, nic->entries, nic->num_entries); /* We fail init if error or we get less vectors than min required */ - if (ret >= (nic->config.tx_fifo_num + nic->config.rx_ring_num + 1)) { - nic->avail_msix_vectors = ret; - ret = pci_enable_msix(nic->pdev, nic->entries, ret); - } if (ret) { DBG_PRINT(ERR_DBG, "%s: Enabling MSIX failed\n", nic->dev->name); kfree(nic->entries); nic->mac_control.stats_info->sw_stat.mem_freed - += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry)); + += (nic->num_entries * sizeof(struct msix_entry)); kfree(nic->s2io_entries); nic->mac_control.stats_info->sw_stat.mem_freed - += (MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry)); + += (nic->num_entries * sizeof(struct s2io_msix_entry)); nic->entries = NULL; nic->s2io_entries = NULL; - nic->avail_msix_vectors = 0; return -ENOMEM; } - if (!nic->avail_msix_vectors) - nic->avail_msix_vectors = MAX_REQUESTED_MSI_X; /* * To enable MSI-X, MSI also needs to be enabled, due to a bug @@ -3935,7 +3968,7 @@ static void remove_msix_isr(struct s2io_nic *sp) int i; u16 msi_control; - for (i = 0; i < MAX_REQUESTED_MSI_X; i++) { + for (i = 0; i < sp->num_entries; i++) { if (sp->s2io_entries[i].in_use == MSIX_REGISTERED_SUCCESS) { int vector = sp->entries[i].vector; @@ -3991,29 +4024,6 @@ static int s2io_open(struct net_device *dev) netif_carrier_off(dev); sp->last_link_state = 0; - if (sp->config.intr_type == MSI_X) { - int ret = s2io_enable_msi_x(sp); - - if (!ret) { - ret = s2io_test_msi(sp); - /* rollback MSI-X, will re-enable during add_isr() */ - remove_msix_isr(sp); - } - if (ret) { - - DBG_PRINT(ERR_DBG, - "%s: MSI-X requested but failed to enable\n", - dev->name); - sp->config.intr_type = INTA; - } - } - - /* NAPI doesn't work well with MSI(X) */ - if (sp->config.intr_type != INTA) { - if(sp->config.napi) - sp->config.napi = 0; - } - /* Initialize H/W and enable interrupts */ err = s2io_card_up(sp); if (err) { @@ -4036,12 +4046,12 @@ hw_init_failed: if (sp->entries) { kfree(sp->entries); sp->mac_control.stats_info->sw_stat.mem_freed - += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry)); + += (sp->num_entries * sizeof(struct msix_entry)); } if (sp->s2io_entries) { kfree(sp->s2io_entries); sp->mac_control.stats_info->sw_stat.mem_freed - += (MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry)); + += (sp->num_entries * sizeof(struct s2io_msix_entry)); } } return err; @@ -4343,25 +4353,29 @@ s2io_alarm_handle(unsigned long data) mod_timer(&sp->alarm_timer, jiffies + HZ / 2); } -static int s2io_chk_rx_buffers(struct ring_info *ring) -{ - if (fill_rx_buffers(ring) == -ENOMEM) { - DBG_PRINT(INFO_DBG, "%s:Out of memory", ring->dev->name); - DBG_PRINT(INFO_DBG, " in Rx Intr!!\n"); - } - return 0; -} - static irqreturn_t s2io_msix_ring_handle(int irq, void *dev_id) { struct ring_info *ring = (struct ring_info *)dev_id; struct s2io_nic *sp = ring->nic; + struct XENA_dev_config __iomem *bar0 = sp->bar0; + struct net_device *dev = sp->dev; - if (!is_s2io_card_up(sp)) + if (unlikely(!is_s2io_card_up(sp))) return IRQ_HANDLED; - rx_intr_handler(ring); - s2io_chk_rx_buffers(ring); + if (sp->config.napi) { + u8 *addr = NULL, val8 = 0; + + addr = (u8 *)&bar0->xmsi_mask_reg; + addr += (7 - ring->ring_no); + val8 = (ring->ring_no == 0) ? 0x7f : 0xff; + writeb(val8, addr); + val8 = readb(addr); + netif_rx_schedule(dev, &ring->napi); + } else { + rx_intr_handler(ring, 0); + s2io_chk_rx_buffers(ring); + } return IRQ_HANDLED; } @@ -4798,14 +4812,10 @@ static irqreturn_t s2io_isr(int irq, void *dev_id) if (config->napi) { if (reason & GEN_INTR_RXTRAFFIC) { - if (likely(netif_rx_schedule_prep(dev, - &sp->napi))) { - __netif_rx_schedule(dev, &sp->napi); - writeq(S2IO_MINUS_ONE, - &bar0->rx_traffic_mask); - } else - writeq(S2IO_MINUS_ONE, - &bar0->rx_traffic_int); + netif_rx_schedule(dev, &sp->napi); + writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_mask); + writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int); + readl(&bar0->rx_traffic_int); } } else { /* @@ -4817,7 +4827,7 @@ static irqreturn_t s2io_isr(int irq, void *dev_id) writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int); for (i = 0; i < config->rx_ring_num; i++) - rx_intr_handler(&mac_control->rings[i]); + rx_intr_handler(&mac_control->rings[i], 0); } /* @@ -7022,8 +7032,9 @@ static int s2io_add_isr(struct s2io_nic * sp) if (sp->config.intr_type == MSI_X) { int i, msix_rx_cnt = 0; - for (i = 0; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) { - if (sp->s2io_entries[i].type == + for (i = 0; i < sp->num_entries; i++) { + if (sp->s2io_entries[i].in_use == MSIX_FLG) { + if (sp->s2io_entries[i].type == MSIX_RING_TYPE) { sprintf(sp->desc[i], "%s:MSI-X-%d-RX", dev->name, i); @@ -7068,7 +7079,7 @@ static int s2io_add_isr(struct s2io_nic * sp) } sp->s2io_entries[i].in_use = MSIX_REGISTERED_SUCCESS; - + } } if (!err) { printk(KERN_INFO "MSI-X-RX %d entries enabled\n", @@ -7115,8 +7126,15 @@ static void do_s2io_card_down(struct s2io_nic * sp, int do_io) clear_bit(__S2IO_STATE_CARD_UP, &sp->state); /* Disable napi */ - if (config->napi) - napi_disable(&sp->napi); + if (sp->config.napi) { + int off = 0; + if (config->intr_type == MSI_X) { + for (; off < sp->config.rx_ring_num; off++) + napi_disable(&sp->mac_control.rings[off].napi); + } + else + napi_disable(&sp->napi); + } /* disable Tx and Rx traffic on the NIC */ if (do_io) @@ -7208,8 +7226,15 @@ static int s2io_card_up(struct s2io_nic * sp) } /* Initialise napi */ - if (config->napi) - napi_enable(&sp->napi); + if (config->napi) { + int i; + if (config->intr_type == MSI_X) { + for (i = 0; i < sp->config.rx_ring_num; i++) + napi_enable(&sp->mac_control.rings[i].napi); + } else { + napi_enable(&sp->napi); + } + } /* Maintain the state prior to the open */ if (sp->promisc_flg) @@ -7650,9 +7675,6 @@ static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type, rx_ring_num = MAX_RX_RINGS; } - if (*dev_intr_type != INTA) - napi = 0; - if ((*dev_intr_type != INTA) && (*dev_intr_type != MSI_X)) { DBG_PRINT(ERR_DBG, "s2io: Wrong intr_type requested. " "Defaulting to INTA\n"); @@ -7953,8 +7975,6 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) * will use eth_mac_addr() for dev->set_mac_address * mac address will be set every time dev->open() is called */ - netif_napi_add(dev, &sp->napi, s2io_poll, 32); - #ifdef CONFIG_NET_POLL_CONTROLLER dev->poll_controller = s2io_netpoll; #endif @@ -7998,6 +8018,32 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) } } + if (sp->config.intr_type == MSI_X) { + sp->num_entries = config->rx_ring_num + 1; + ret = s2io_enable_msi_x(sp); + + if (!ret) { + ret = s2io_test_msi(sp); + /* rollback MSI-X, will re-enable during add_isr() */ + remove_msix_isr(sp); + } + if (ret) { + + DBG_PRINT(ERR_DBG, + "%s: MSI-X requested but failed to enable\n", + dev->name); + sp->config.intr_type = INTA; + } + } + + if (config->intr_type == MSI_X) { + for (i = 0; i < config->rx_ring_num ; i++) + netif_napi_add(dev, &mac_control->rings[i].napi, + s2io_poll_msix, 64); + } else { + netif_napi_add(dev, &sp->napi, s2io_poll_inta, 64); + } + /* Not needed for Herc */ if (sp->device_type & XFRAME_I_DEVICE) { /* @@ -8048,6 +8094,11 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) /* store mac addresses from CAM to s2io_nic structure */ do_s2io_store_unicast_mc(sp); + /* Configure MSIX vector for number of rings configured plus one */ + if ((sp->device_type == XFRAME_II_DEVICE) && + (config->intr_type == MSI_X)) + sp->num_entries = config->rx_ring_num + 1; + /* Store the values of the MSIX table in the s2io_nic structure */ store_xmsi_data(sp); /* reset Nic and bring it to known state */ @@ -8113,8 +8164,14 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) break; } - if (napi) + switch (sp->config.napi) { + case 0: + DBG_PRINT(ERR_DBG, "%s: NAPI disabled\n", dev->name); + break; + case 1: DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name); + break; + } DBG_PRINT(ERR_DBG, "%s: Using %d Tx fifo(s)\n", dev->name, sp->config.tx_fifo_num); diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index 9a4b772f741..4706f7f9acb 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -706,7 +706,7 @@ struct ring_info { /* per-ring buffer counter */ u32 rx_bufs_left; - #define MAX_LRO_SESSIONS 32 +#define MAX_LRO_SESSIONS 32 struct lro lro0_n[MAX_LRO_SESSIONS]; u8 lro; @@ -725,6 +725,11 @@ struct ring_info { /* copy of sp->pdev pointer */ struct pci_dev *pdev; + /* Per ring napi struct */ + struct napi_struct napi; + + unsigned long interrupt_count; + /* * Place holders for the virtual and physical addresses of * all the Rx Blocks @@ -841,7 +846,7 @@ struct usr_addr { * Structure to keep track of the MSI-X vectors and the corresponding * argument registered against each vector */ -#define MAX_REQUESTED_MSI_X 17 +#define MAX_REQUESTED_MSI_X 9 struct s2io_msix_entry { u16 vector; @@ -877,7 +882,6 @@ struct s2io_nic { */ int pkts_to_process; struct net_device *dev; - struct napi_struct napi; struct mac_info mac_control; struct config_param config; struct pci_dev *pdev; @@ -948,6 +952,7 @@ struct s2io_nic { */ u8 other_fifo_idx; + struct napi_struct napi; /* after blink, the adapter must be restored with original * values. */ @@ -962,6 +967,7 @@ struct s2io_nic { unsigned long long start_time; struct vlan_group *vlgrp; #define MSIX_FLG 0xA5 + int num_entries; struct msix_entry *entries; int msi_detected; wait_queue_head_t msi_wait; @@ -1104,7 +1110,7 @@ static void __devexit s2io_rem_nic(struct pci_dev *pdev); static int init_shared_mem(struct s2io_nic *sp); static void free_shared_mem(struct s2io_nic *sp); static int init_nic(struct s2io_nic *nic); -static void rx_intr_handler(struct ring_info *ring_data); +static int rx_intr_handler(struct ring_info *ring_data, int budget); static void tx_intr_handler(struct fifo_info *fifo_data); static void s2io_handle_errors(void * dev_id); @@ -1115,7 +1121,8 @@ static void s2io_set_multicast(struct net_device *dev); static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp); static void s2io_link(struct s2io_nic * sp, int link); static void s2io_reset(struct s2io_nic * sp); -static int s2io_poll(struct napi_struct *napi, int budget); +static int s2io_poll_msix(struct napi_struct *napi, int budget); +static int s2io_poll_inta(struct napi_struct *napi, int budget); static void s2io_init_pci(struct s2io_nic * sp); static int do_s2io_prog_unicast(struct net_device *dev, u8 *addr); static void s2io_alarm_handle(unsigned long data); -- cgit v1.2.3 From 0b5923cd477674755dde670ba804649523f27c97 Mon Sep 17 00:00:00 2001 From: Sreenivasa Honnur Date: Mon, 12 May 2008 13:43:05 -0400 Subject: S2io: Version update for napi and MSI-X patches - Updated version number Signed-off-by: Sreenivasa Honnur Signed-off-by: Ramkrishna Vepa Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 807fb8db8c4..a20693e09ae 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -86,7 +86,7 @@ #include "s2io.h" #include "s2io-regs.h" -#define DRV_VERSION "2.0.26.23" +#define DRV_VERSION "2.0.26.24" /* S2io Driver name & version. */ static char s2io_driver_name[] = "Neterion"; -- cgit v1.2.3 From 4ecc8c066f3cecb55807644a01435084d8ed638a Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 12 May 2008 15:38:26 +0200 Subject: drivers/net/fs_enet: remove null pointer dereference The following code appears in the function fs_init_instance in the file drivers/net/fs_enet/fs_enet-main.c. if (fep->ops == NULL) { printk(KERN_ERR DRV_MODULE_NAME ": %s No matching ops found (%d).\n", ndev->name, fpi->fs_no); err = -EINVAL; goto err; } This code implies that at the point of err, fep->ops can be NULL, so an extra test is needed before dereferencing this value. This problem was found using the following semantic match (http://www.emn.fr/x-info/coccinelle/) // @@ expression E, E1; identifier f; statement S1,S2,S3; @@ * if (E == NULL) { ... when != if (E == NULL) S1 else S2 when != E = E1 * E->f ... when any return ...; } else S3 // Signed-off-by: Julia Lawall Signed-off-by: Jeff Garzik --- drivers/net/fs_enet/fs_enet-main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c index 67b4b0728fc..a5baaf59ff6 100644 --- a/drivers/net/fs_enet/fs_enet-main.c +++ b/drivers/net/fs_enet/fs_enet-main.c @@ -1093,7 +1093,7 @@ err: if (registered) unregister_netdev(ndev); - if (fep != NULL) { + if (fep && fep->ops) { (*fep->ops->free_bd)(ndev); (*fep->ops->cleanup_data)(ndev); } -- cgit v1.2.3 From fa701bd24d6e64a2283d6fa386554775fd4336e7 Mon Sep 17 00:00:00 2001 From: Krzysztof Halasa Date: Mon, 19 May 2008 19:00:51 +0200 Subject: WAN: protect HDLC proto list while insmod/rmmod MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit WAN: protect protocol list in hdlc.c with RTNL. Signed-off-by: Krzysztof HaÅ‚asa Signed-off-by: Jeff Garzik --- drivers/net/wan/hdlc.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wan/hdlc.c b/drivers/net/wan/hdlc.c index 9a83c9d5b8c..7f984895b0d 100644 --- a/drivers/net/wan/hdlc.c +++ b/drivers/net/wan/hdlc.c @@ -43,8 +43,7 @@ static const char* version = "HDLC support module revision 1.22"; #undef DEBUG_LINK -static struct hdlc_proto *first_proto = NULL; - +static struct hdlc_proto *first_proto; static int hdlc_change_mtu(struct net_device *dev, int new_mtu) { @@ -314,21 +313,25 @@ void detach_hdlc_protocol(struct net_device *dev) void register_hdlc_protocol(struct hdlc_proto *proto) { + rtnl_lock(); proto->next = first_proto; first_proto = proto; + rtnl_unlock(); } void unregister_hdlc_protocol(struct hdlc_proto *proto) { - struct hdlc_proto **p = &first_proto; - while (*p) { - if (*p == proto) { - *p = proto->next; - return; - } + struct hdlc_proto **p; + + rtnl_lock(); + p = &first_proto; + while (*p != proto) { + BUG_ON(!*p); p = &((*p)->next); } + *p = proto->next; + rtnl_unlock(); } -- cgit v1.2.3 From 4ba35fbe293be319b1a5d97951e567c0d9527d09 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Thu, 22 May 2008 10:19:28 +0100 Subject: [ARM] 5043/1: pxafb: remove unused mode variable in pxafb_init_fbinfo Signed-off-by: Philipp Zabel Acked-by: Eric Miao Signed-off-by: Russell King --- drivers/video/pxafb.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 3ee314beacc..274bc93ab7d 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -1351,7 +1351,6 @@ static struct pxafb_info * __init pxafb_init_fbinfo(struct device *dev) struct pxafb_info *fbi; void *addr; struct pxafb_mach_info *inf = dev->platform_data; - struct pxafb_mode_info *mode = inf->modes; /* Alloc the pxafb_info and pseudo_palette in one step */ fbi = kmalloc(sizeof(struct pxafb_info) + sizeof(u32) * 16, GFP_KERNEL); -- cgit v1.2.3 From a01b3d766c0ad3e63978b0f6faf4004688f13522 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Thu, 22 May 2008 12:43:50 -0400 Subject: phylib: do EXPORT_SYMBOL on get_phy_id Commit cac1f3c8 factored out the code for get_phy_id so that it could be reused in multiple places. Turns out that some of the users can be modular, so we need to export this symbol as well. Signed-off-by: Paul Gortmaker Signed-off-by: Jeff Garzik --- drivers/net/phy/phy_device.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index ac3c01d28fd..16a0e7de588 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -207,6 +207,7 @@ int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id) return 0; } +EXPORT_SYMBOL(get_phy_id); /** * get_phy_device - reads the specified PHY device and returns its @phy_device struct -- cgit v1.2.3 From 288369cc2580178ef6ed7c5c63cc1ef08c803250 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Thu, 22 May 2008 18:07:43 +0800 Subject: VIRTIO: Use __skb_queue_purge() Use standard routine for queue purging. Signed-off-by: Wang Chen Signed-off-by: Jeff Garzik --- drivers/net/virtio_net.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index f926b5ab3d0..fe7cdf2a2a2 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -470,8 +470,7 @@ static void virtnet_remove(struct virtio_device *vdev) kfree_skb(skb); vi->num--; } - while ((skb = __skb_dequeue(&vi->send)) != NULL) - kfree_skb(skb); + __skb_queue_purge(&vi->send); BUG_ON(vi->num != 0); -- cgit v1.2.3 From 56cfe5d028687468f76e8b613c63ca41f209982d Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Thu, 22 May 2008 18:09:06 +0800 Subject: NETFRONT: Use __skb_queue_purge() Use standard routine for queue purging. Signed-off-by: Wang Chen Signed-off-by: Jeff Garzik --- drivers/net/xen-netfront.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index 8bddff150c7..d26f69b0184 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -946,8 +946,7 @@ err: work_done++; } - while ((skb = __skb_dequeue(&errq))) - kfree_skb(skb); + __skb_queue_purge(&errq); work_done -= handle_incoming_queue(dev, &rxq); @@ -1079,8 +1078,7 @@ static void xennet_release_rx_bufs(struct netfront_info *np) } } - while ((skb = __skb_dequeue(&free_list)) != NULL) - dev_kfree_skb(skb); + __skb_queue_purge(&free_list); spin_unlock_bh(&np->rx_lock); } -- cgit v1.2.3 From f7f312a0c7e7a1947cf193e0e94a257ad7742cb2 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Tue, 20 May 2008 17:13:52 +0800 Subject: 3C509: rx_bytes should not be increased when alloc_skb failed If alloc_skb failed, the recieved packet will be dropped. Do not increase rx_bytes for dropped packet. Signed-off-by: Wang Chen Signed-off-by: Jeff Garzik --- drivers/net/3c509.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c index e6c545fe5f5..fe6d84105e5 100644 --- a/drivers/net/3c509.c +++ b/drivers/net/3c509.c @@ -1063,7 +1063,6 @@ el3_rx(struct net_device *dev) struct sk_buff *skb; skb = dev_alloc_skb(pkt_len+5); - dev->stats.rx_bytes += pkt_len; if (el3_debug > 4) printk("Receiving packet size %d status %4.4x.\n", pkt_len, rx_status); @@ -1078,6 +1077,7 @@ el3_rx(struct net_device *dev) skb->protocol = eth_type_trans(skb,dev); netif_rx(skb); dev->last_rx = jiffies; + dev->stats.rx_bytes += pkt_len; dev->stats.rx_packets++; continue; } -- cgit v1.2.3 From 43fc63dceb8ff58c5ef0a30c70abd31336b5e8b4 Mon Sep 17 00:00:00 2001 From: Komuro Date: Sun, 20 Apr 2008 14:32:34 +0900 Subject: xirc2ps_cs: re-initialize the multicast address in do_reset keep bit7,8 of XIRCREG42_SWC1 in set_multicast_list. Signed-off-by: Komuro Signed-off-by: Jeff Garzik --- drivers/net/pcmcia/xirc2ps_cs.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index d041f831a18..f6c4698ce73 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -1461,22 +1461,25 @@ static void set_multicast_list(struct net_device *dev) { unsigned int ioaddr = dev->base_addr; + unsigned value; SelectPage(0x42); + value = GetByte(XIRCREG42_SWC1) & 0xC0; + if (dev->flags & IFF_PROMISC) { /* snoop */ - PutByte(XIRCREG42_SWC1, 0x06); /* set MPE and PME */ + PutByte(XIRCREG42_SWC1, value | 0x06); /* set MPE and PME */ } else if (dev->mc_count > 9 || (dev->flags & IFF_ALLMULTI)) { - PutByte(XIRCREG42_SWC1, 0x02); /* set MPE */ + PutByte(XIRCREG42_SWC1, value | 0x02); /* set MPE */ } else if (dev->mc_count) { /* the chip can filter 9 addresses perfectly */ - PutByte(XIRCREG42_SWC1, 0x01); + PutByte(XIRCREG42_SWC1, value | 0x01); SelectPage(0x40); PutByte(XIRCREG40_CMD0, Offline); set_addresses(dev); SelectPage(0x40); PutByte(XIRCREG40_CMD0, EnableRecv | Online); } else { /* standard usage */ - PutByte(XIRCREG42_SWC1, 0x00); + PutByte(XIRCREG42_SWC1, value | 0x00); } SelectPage(0); } @@ -1722,6 +1725,7 @@ do_reset(struct net_device *dev, int full) /* enable receiver and put the mac online */ if (full) { + set_multicast_list(dev); SelectPage(0x40); PutByte(XIRCREG40_CMD0, EnableRecv | Online); } -- cgit v1.2.3 From bdefff1f54cb76a19700663f211350de2f65cc91 Mon Sep 17 00:00:00 2001 From: Komuro Date: Mon, 5 May 2008 10:51:12 +0900 Subject: fmvj18x_cs: add NextCom NC5310 rev B support fmvj18x_cs: The manfid of "NextCom NC5310 rev B" is MANF_ID_FUJITSU. but this card is MBH10302 based card. use ConfigBase to detect the cardtype for this card. Signed-off-by: Komuro Signed-off-by: Jeff Garzik --- drivers/net/pcmcia/fmvj18x_cs.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c index 8f328a03847..a550c9bd126 100644 --- a/drivers/net/pcmcia/fmvj18x_cs.c +++ b/drivers/net/pcmcia/fmvj18x_cs.c @@ -391,7 +391,9 @@ static int fmvj18x_config(struct pcmcia_device *link) cardtype = CONTEC; break; case MANFID_FUJITSU: - if (link->card_id == PRODID_FUJITSU_MBH10302) + if (link->conf.ConfigBase == 0x0fe0) + cardtype = MBH10302; + else if (link->card_id == PRODID_FUJITSU_MBH10302) /* RATOC REX-5588/9822/4886's PRODID are 0004(=MBH10302), but these are MBH10304 based card. */ cardtype = MBH10304; -- cgit v1.2.3 From 4f74369422b883164c50b5936517d010a3e1ce59 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Thu, 22 May 2008 08:52:05 +0200 Subject: [CPUFREQ] clarify license of freq_table.c Signed-off-by: Dominik Brodowski Signed-off-by: Dave Jones --- drivers/cpufreq/freq_table.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c index ae6cd60d5c1..b64c6bc445e 100644 --- a/drivers/cpufreq/freq_table.c +++ b/drivers/cpufreq/freq_table.c @@ -2,6 +2,11 @@ * linux/drivers/cpufreq/freq_table.c * * Copyright (C) 2002 - 2003 Dominik Brodowski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * */ #include -- cgit v1.2.3 From 8962cadbe7cbc4ed0fff94f56ebab505a10afd2e Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Fri, 23 May 2008 11:41:46 +1000 Subject: [POWERPC] iSeries: Remove unused mail address I don't use my IBM email address normally and people can find me in CREDITS. Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- drivers/block/viodasd.c | 2 +- drivers/cdrom/viocd.c | 2 +- drivers/char/viocons.c | 2 +- drivers/char/viotape.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/block/viodasd.c b/drivers/block/viodasd.c index ebfe038d859..f1c8feb5510 100644 --- a/drivers/block/viodasd.c +++ b/drivers/block/viodasd.c @@ -3,7 +3,7 @@ * Authors: Dave Boutcher * Ryan Arnold * Colin Devilbiss - * Stephen Rothwell + * Stephen Rothwell * * (C) Copyright 2000-2004 IBM Corporation * diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c index 5245a4a0ba7..9d0dfe6e0d6 100644 --- a/drivers/cdrom/viocd.c +++ b/drivers/cdrom/viocd.c @@ -6,7 +6,7 @@ * Authors: Dave Boutcher * Ryan Arnold * Colin Devilbiss - * Stephen Rothwell + * Stephen Rothwell * * (C) Copyright 2000-2004 IBM Corporation * diff --git a/drivers/char/viocons.c b/drivers/char/viocons.c index 3d3e1c2b310..65fb848e1cc 100644 --- a/drivers/char/viocons.c +++ b/drivers/char/viocons.c @@ -7,7 +7,7 @@ * Authors: Dave Boutcher * Ryan Arnold * Colin Devilbiss - * Stephen Rothwell + * Stephen Rothwell * * (C) Copyright 2000, 2001, 2002, 2003, 2004 IBM Corporation * diff --git a/drivers/char/viotape.c b/drivers/char/viotape.c index 58aad63831f..c39ddaff5e8 100644 --- a/drivers/char/viotape.c +++ b/drivers/char/viotape.c @@ -6,7 +6,7 @@ * Authors: Dave Boutcher * Ryan Arnold * Colin Devilbiss - * Stephen Rothwell + * Stephen Rothwell * * (C) Copyright 2000-2004 IBM Corporation * -- cgit v1.2.3 From b62151de496d26a705942b945fab9cecdb3fb8da Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Thu, 22 May 2008 15:45:06 -0700 Subject: acpi: fix integer as NULL pointer warning drivers/acpi/dispatcher/dsmethod.c:568:50: warning: Using plain integer as NULL pointer drivers/acpi/executer/exmutex.c:329:30: warning: Using plain integer as NULL pointer drivers/acpi/executer/exmutex.c:466:31: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison Signed-off-by: Linus Torvalds --- drivers/acpi/dispatcher/dsmethod.c | 2 +- drivers/acpi/executer/exmutex.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/dispatcher/dsmethod.c b/drivers/acpi/dispatcher/dsmethod.c index e48a3ea0311..2509809a36c 100644 --- a/drivers/acpi/dispatcher/dsmethod.c +++ b/drivers/acpi/dispatcher/dsmethod.c @@ -565,7 +565,7 @@ acpi_ds_terminate_control_method(union acpi_operand_object *method_desc, acpi_os_release_mutex(method_desc->method. mutex->mutex.os_mutex); - method_desc->method.mutex->mutex.thread_id = 0; + method_desc->method.mutex->mutex.thread_id = NULL; } } diff --git a/drivers/acpi/executer/exmutex.c b/drivers/acpi/executer/exmutex.c index c873ab40cd0..a8bf3d713e2 100644 --- a/drivers/acpi/executer/exmutex.c +++ b/drivers/acpi/executer/exmutex.c @@ -326,7 +326,7 @@ acpi_status acpi_ex_release_mutex_object(union acpi_operand_object *obj_desc) /* Clear mutex info */ - obj_desc->mutex.thread_id = 0; + obj_desc->mutex.thread_id = NULL; return_ACPI_STATUS(status); } @@ -463,7 +463,7 @@ void acpi_ex_release_all_mutexes(struct acpi_thread_state *thread) /* Mark mutex unowned */ obj_desc->mutex.owner_thread = NULL; - obj_desc->mutex.thread_id = 0; + obj_desc->mutex.thread_id = NULL; /* Update Thread sync_level (Last mutex is the important one) */ -- cgit v1.2.3 From 94b5e0ac694baba20efbe7d8ce6ff9cbe1776162 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Thu, 22 May 2008 15:45:07 -0700 Subject: isdn: fix integer as NULL pointer warning drivers/isdn/hysdn/hycapi.c:465:42: warning: Using plain integer as NULL pointer drivers/isdn/hysdn/hycapi.c:467:44: warning: Using plain integer as NULL pointer drivers/isdn/hysdn/hycapi.c:469:42: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison Signed-off-by: Linus Torvalds --- drivers/isdn/hysdn/hycapi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/isdn/hysdn/hycapi.c b/drivers/isdn/hysdn/hycapi.c index d3999a8e9f8..53f6ad1235d 100644 --- a/drivers/isdn/hysdn/hycapi.c +++ b/drivers/isdn/hysdn/hycapi.c @@ -462,11 +462,11 @@ static int hycapi_read_proc(char *page, char **start, off_t off, default: s = "???"; break; } len += sprintf(page+len, "%-16s %s\n", "type", s); - if ((s = cinfo->version[VER_DRIVER]) != 0) + if ((s = cinfo->version[VER_DRIVER]) != NULL) len += sprintf(page+len, "%-16s %s\n", "ver_driver", s); - if ((s = cinfo->version[VER_CARDTYPE]) != 0) + if ((s = cinfo->version[VER_CARDTYPE]) != NULL) len += sprintf(page+len, "%-16s %s\n", "ver_cardtype", s); - if ((s = cinfo->version[VER_SERIAL]) != 0) + if ((s = cinfo->version[VER_SERIAL]) != NULL) len += sprintf(page+len, "%-16s %s\n", "ver_serial", s); len += sprintf(page+len, "%-16s %s\n", "cardname", cinfo->cardname); -- cgit v1.2.3 From 9bcf091083065c751a4d90317b766370d2497ae9 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Thu, 22 May 2008 15:45:07 -0700 Subject: scsi: fix integer as NULL pointer warning drivers/scsi/aha152x.c:3585:60: warning: Using plain integer as NULL pointer drivers/scsi/aha152x.c:3845:56: warning: Using plain integer as NULL pointer drivers/scsi/qla1280.c:2814:37: warning: Using plain integer as NULL pointer drivers/scsi/atp870u.c:750:47: warning: Using plain integer as NULL pointer drivers/scsi/3w-9xxx.c:1281:36: warning: Using plain integer as NULL pointer drivers/scsi/3w-9xxx.c:1293:36: warning: Using plain integer as NULL pointer drivers/scsi/3w-9xxx.c:1301:35: warning: Using plain integer as NULL pointer drivers/scsi/hptiop.c:447:10: warning: Using plain integer as NULL pointer drivers/scsi/hptiop.c:457:10: warning: Using plain integer as NULL pointer drivers/scsi/hptiop.c:479:24: warning: Using plain integer as NULL pointer drivers/scsi/hptiop.c:483:22: warning: Using plain integer as NULL pointer drivers/scsi/hptiop.c:1213:23: warning: Using plain integer as NULL pointer drivers/scsi/hptiop.c:1214:23: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison Signed-off-by: Linus Torvalds --- drivers/scsi/3w-9xxx.c | 6 +++--- drivers/scsi/aha152x.c | 4 ++-- drivers/scsi/atp870u.c | 2 +- drivers/scsi/hptiop.c | 12 ++++++------ drivers/scsi/qla1280.c | 2 +- 5 files changed, 13 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c index b31faeccb9c..867f6fd5c2c 100644 --- a/drivers/scsi/3w-9xxx.c +++ b/drivers/scsi/3w-9xxx.c @@ -1278,7 +1278,7 @@ static irqreturn_t twa_interrupt(int irq, void *dev_instance) error = 0; /* Check for command packet errors */ if (full_command_packet->command.newcommand.status != 0) { - if (tw_dev->srb[request_id] != 0) { + if (tw_dev->srb[request_id] != NULL) { error = twa_fill_sense(tw_dev, request_id, 1, 1); } else { /* Skip ioctl error prints */ @@ -1290,7 +1290,7 @@ static irqreturn_t twa_interrupt(int irq, void *dev_instance) /* Check for correct state */ if (tw_dev->state[request_id] != TW_S_POSTED) { - if (tw_dev->srb[request_id] != 0) { + if (tw_dev->srb[request_id] != NULL) { TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1a, "Received a request id that wasn't posted"); TW_CLEAR_ALL_INTERRUPTS(tw_dev); goto twa_interrupt_bail; @@ -1298,7 +1298,7 @@ static irqreturn_t twa_interrupt(int irq, void *dev_instance) } /* Check for internal command completion */ - if (tw_dev->srb[request_id] == 0) { + if (tw_dev->srb[request_id] == NULL) { if (request_id != tw_dev->chrdev_request_id) { if (twa_aen_complete(tw_dev, request_id)) TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1b, "Error completing AEN during attention interrupt"); diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c index 1dca1775f4b..0899cb61e3d 100644 --- a/drivers/scsi/aha152x.c +++ b/drivers/scsi/aha152x.c @@ -3582,7 +3582,7 @@ static int checksetup(struct aha152x_setup *setup) if (i == ARRAY_SIZE(ports)) return 0; - if ( request_region(setup->io_port, IO_RANGE, "aha152x")==0 ) { + if (!request_region(setup->io_port, IO_RANGE, "aha152x")) { printk(KERN_ERR "aha152x: io port 0x%x busy.\n", setup->io_port); return 0; } @@ -3842,7 +3842,7 @@ static int __init aha152x_init(void) if ((setup_count == 1) && (setup[0].io_port == ports[i])) continue; - if ( request_region(ports[i], IO_RANGE, "aha152x")==0 ) { + if (!request_region(ports[i], IO_RANGE, "aha152x")) { printk(KERN_ERR "aha152x: io port 0x%x busy.\n", ports[i]); continue; } diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c index db6de5e6afb..7d311541c76 100644 --- a/drivers/scsi/atp870u.c +++ b/drivers/scsi/atp870u.c @@ -747,7 +747,7 @@ static void send_s870(struct atp_unit *dev,unsigned char c) dev->quhd[c] = 0; } workreq = dev->quereq[c][dev->quhd[c]]; - if (dev->id[c][scmd_id(workreq)].curr_req == 0) { + if (dev->id[c][scmd_id(workreq)].curr_req == NULL) { dev->id[c][scmd_id(workreq)].curr_req = workreq; dev->last_cmd[c] = scmd_id(workreq); goto cmd_subp; diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c index aaa48e0c8ed..da876d3924b 100644 --- a/drivers/scsi/hptiop.c +++ b/drivers/scsi/hptiop.c @@ -444,7 +444,7 @@ static void __iomem *hptiop_map_pci_bar(struct hptiop_hba *hba, int index) if (!(pci_resource_flags(pcidev, index) & IORESOURCE_MEM)) { printk(KERN_ERR "scsi%d: pci resource invalid\n", hba->host->host_no); - return 0; + return NULL; } mem_base_phy = pci_resource_start(pcidev, index); @@ -454,7 +454,7 @@ static void __iomem *hptiop_map_pci_bar(struct hptiop_hba *hba, int index) if (!mem_base_virt) { printk(KERN_ERR "scsi%d: Fail to ioremap memory space\n", hba->host->host_no); - return 0; + return NULL; } return mem_base_virt; } @@ -476,11 +476,11 @@ static void hptiop_unmap_pci_bar_itl(struct hptiop_hba *hba) static int hptiop_map_pci_bar_mv(struct hptiop_hba *hba) { hba->u.mv.regs = hptiop_map_pci_bar(hba, 0); - if (hba->u.mv.regs == 0) + if (hba->u.mv.regs == NULL) return -1; hba->u.mv.mu = hptiop_map_pci_bar(hba, 2); - if (hba->u.mv.mu == 0) { + if (hba->u.mv.mu == NULL) { iounmap(hba->u.mv.regs); return -1; } @@ -1210,8 +1210,8 @@ static void hptiop_remove(struct pci_dev *pcidev) static struct hptiop_adapter_ops hptiop_itl_ops = { .iop_wait_ready = iop_wait_ready_itl, - .internal_memalloc = 0, - .internal_memfree = 0, + .internal_memalloc = NULL, + .internal_memfree = NULL, .map_pci_bar = hptiop_map_pci_bar_itl, .unmap_pci_bar = hptiop_unmap_pci_bar_itl, .enable_intr = hptiop_enable_intr_itl, diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c index 51e2f299dbb..3754ab87f89 100644 --- a/drivers/scsi/qla1280.c +++ b/drivers/scsi/qla1280.c @@ -2811,7 +2811,7 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp) /* Check for room in outstanding command list. */ for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS && - ha->outstanding_cmds[cnt] != 0; cnt++); + ha->outstanding_cmds[cnt] != NULL; cnt++); if (cnt >= MAX_OUTSTANDING_COMMANDS) { status = 1; -- cgit v1.2.3 From 5e2daeb3c982ea19ecad0c2e720a4052034be14b Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Thu, 22 May 2008 15:45:08 -0700 Subject: fbdev: fix integer as NULL pointer warning drivers/video/aty/atyfb_base.c:3359:26: warning: Using plain integer as NULL pointer drivers/video/aty/radeon_base.c:2280:32: warning: Using plain integer as NULL pointer drivers/video/matrox/matroxfb_base.h:203:25: warning: Using plain integer as NULL pointer drivers/video/matrox/matroxfb_base.h:203:25: warning: Using plain integer as NULL pointer drivers/video/sis/sis_main.c:5790:44: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison Signed-off-by: Linus Torvalds --- drivers/video/aty/atyfb_base.c | 2 +- drivers/video/aty/radeon_base.c | 4 ++-- drivers/video/matrox/matroxfb_base.h | 2 +- drivers/video/sis/sis_main.c | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c index e4bcf5376a9..bd4ac0bafec 100644 --- a/drivers/video/aty/atyfb_base.c +++ b/drivers/video/aty/atyfb_base.c @@ -3356,7 +3356,7 @@ static int __devinit atyfb_setup_generic(struct pci_dev *pdev, struct fb_info *i info->fix.mmio_start = raddr; par->ati_regbase = ioremap(info->fix.mmio_start, 0x1000); - if (par->ati_regbase == 0) + if (par->ati_regbase == NULL) return -ENOMEM; info->fix.mmio_start += par->aux_start ? 0x400 : 0xc00; diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c index 72cd0d2f14e..400e9264e45 100644 --- a/drivers/video/aty/radeon_base.c +++ b/drivers/video/aty/radeon_base.c @@ -2277,8 +2277,8 @@ static int __devinit radeonfb_pci_register (struct pci_dev *pdev, do { rinfo->fb_base = ioremap (rinfo->fb_base_phys, rinfo->mapped_vram); - } while ( rinfo->fb_base == 0 && - ((rinfo->mapped_vram /=2) >= MIN_MAPPED_VRAM) ); + } while (rinfo->fb_base == NULL && + ((rinfo->mapped_vram /= 2) >= MIN_MAPPED_VRAM)); if (rinfo->fb_base == NULL) { printk (KERN_ERR "radeonfb (%s): cannot map FB\n", diff --git a/drivers/video/matrox/matroxfb_base.h b/drivers/video/matrox/matroxfb_base.h index f3107ad7e54..95883236c0c 100644 --- a/drivers/video/matrox/matroxfb_base.h +++ b/drivers/video/matrox/matroxfb_base.h @@ -200,7 +200,7 @@ static inline int mga_ioremap(unsigned long phys, unsigned long size, int flags, virt->vaddr = ioremap_nocache(phys, size); else virt->vaddr = ioremap(phys, size); - return (virt->vaddr == 0); /* 0, !0... 0, error_code in future */ + return (virt->vaddr == NULL); /* 0, !0... 0, error_code in future */ } static inline void mga_iounmap(vaddr_t va) { diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c index 73803624c13..b9343844cd1 100644 --- a/drivers/video/sis/sis_main.c +++ b/drivers/video/sis/sis_main.c @@ -5787,7 +5787,7 @@ sisfb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } else { struct sis_video_info *countvideo = card_list; ivideo->cardnumber = 1; - while((countvideo = countvideo->next) != 0) + while((countvideo = countvideo->next) != NULL) ivideo->cardnumber++; } -- cgit v1.2.3 From 57f7bd5b455298dbe94227aa1fedbbfe63bbf252 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Fri, 23 May 2008 08:40:45 -0700 Subject: remove debug printk from DRM suspend path Not sure how this snuck upstream, but it really doesn't belong there. We don't need a KERN_ERR printk in the suspend path to know what's going on (at least not anymore). Signed-off-by: Jesse Barnes Signed-off-by: Linus Torvalds --- drivers/char/drm/drm_sysfs.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/char/drm/drm_sysfs.c b/drivers/char/drm/drm_sysfs.c index 9a32169e88f..af211a0ef17 100644 --- a/drivers/char/drm/drm_sysfs.c +++ b/drivers/char/drm/drm_sysfs.c @@ -34,8 +34,6 @@ static int drm_sysfs_suspend(struct device *dev, pm_message_t state) struct drm_minor *drm_minor = to_drm_minor(dev); struct drm_device *drm_dev = drm_minor->dev; - printk(KERN_ERR "%s\n", __func__); - if (drm_dev->driver->suspend) return drm_dev->driver->suspend(drm_dev, state); -- cgit v1.2.3 From 5a4f2b675210718aceb4abf41617a3af31bba718 Mon Sep 17 00:00:00 2001 From: Dave Olson Date: Fri, 23 May 2008 10:52:59 -0700 Subject: IB/mad: Fix kernel crash when .process_mad() returns SUCCESS|CONSUMED If a low-level driver returns IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_CONSUMED, handle_outgoing_dr_smp() doesn't clean up properly. The fix is to kfree the local data and break, rather than falling through. This was observed with the ipath driver, but could happen with any driver. This fixes . Signed-off-by: Dave Olson Signed-off-by: Roland Dreier --- drivers/infiniband/core/mad.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c index fbe16d5250a..1adf2efd3cb 100644 --- a/drivers/infiniband/core/mad.c +++ b/drivers/infiniband/core/mad.c @@ -747,7 +747,9 @@ static int handle_outgoing_dr_smp(struct ib_mad_agent_private *mad_agent_priv, break; case IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_CONSUMED: kmem_cache_free(ib_mad_cache, mad_priv); - break; + kfree(local); + ret = 1; + goto out; case IB_MAD_RESULT_SUCCESS: /* Treat like an incoming receive MAD */ port_priv = ib_get_mad_port(mad_agent_priv->agent.device, -- cgit v1.2.3 From 1f42ea7bc0ddfadebd9e1c5362b41b53902dbcb1 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Thu, 22 May 2008 12:34:41 +0100 Subject: [SCSI] fix intermittent oops in scsi_bus_uevent Reported-by: Sitsofe Wheeler > BUG: unable to handle kernel paging request at e6f17fac > IP: [] scsi_bus_uevent+0x1/0x17 > *pde = 2714b163 *pte = 26f17160 > Oops: 0000 [#1] DEBUG_PAGEALLOC > last sysfs file: > > Pid: 1, comm: swapper Not tainted (2.6.26-rc2-next-20080516skw #30) > EIP: 0060:[] EFLAGS: 00010282 CPU: 0 > EIP is at scsi_bus_uevent+0x1/0x17 > EAX: e6f18014 EBX: e6f18014 ECX: c02604d5 EDX: e7173000 > ESI: e7173000 EDI: e7173000 EBP: e7851ca0 ESP: e7851c90 > DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 The problem is caused by: commit b0ed43360fdca227048d88a08290365cb681c1a8 Author: Hannes Reinecke Date: Tue Mar 18 14:32:28 2008 +0100 [SCSI] add scsi_host and scsi_target to scsi_bus which added scsi_bus_type to the struct scsi_target device. This causes both the scsi_device and scsi_target to fire scsi_bus_uevents. However, the actualy scsi_bus_uevent() call assumes blindly that it's a struct scsi_device. Check for this and return immediately if it isn't. Signed-off-by: James Bottomley --- drivers/scsi/scsi_sysfs.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index 049103f1d16..93d2b671445 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -359,7 +359,12 @@ static int scsi_bus_match(struct device *dev, struct device_driver *gendrv) static int scsi_bus_uevent(struct device *dev, struct kobj_uevent_env *env) { - struct scsi_device *sdev = to_scsi_device(dev); + struct scsi_device *sdev; + + if (dev->type != &scsi_dev_type) + return 0; + + sdev = to_scsi_device(dev); add_uevent_var(env, "MODALIAS=" SCSI_DEVICE_MODALIAS_FMT, sdev->type); return 0; -- cgit v1.2.3 From 4efeb4dd3c0bf534e431a8e7c72d0afbd4cd24aa Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 12 May 2008 21:21:05 +0200 Subject: PCI: use dev_to_node in pci_call_probe to make sure get one online node. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- drivers/pci/pci-driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 72cf61ed8f9..e1637bd82b8 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -181,7 +181,7 @@ static int pci_call_probe(struct pci_driver *drv, struct pci_dev *dev, any need to change it. */ struct mempolicy *oldpol; cpumask_t oldmask = current->cpus_allowed; - int node = pcibus_to_node(dev->bus); + int node = dev_to_node(&dev->dev); if (node >= 0) { node_to_cpumask_ptr(nodecpumask, node); -- cgit v1.2.3 From ca68d0ac16539a062ae26ca50da8b186fa3a0814 Mon Sep 17 00:00:00 2001 From: Gabor Czigola Date: Fri, 23 May 2008 13:04:23 -0700 Subject: hdaps: invert the axes for HDAPS on Lenovo R61i ThinkPads Cc: "Mark M. Hoffman" Cc: Dmitry Torokhov Cc: Jiri Kosina Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/hwmon/hdaps.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/hwmon/hdaps.c b/drivers/hwmon/hdaps.c index bab5fd2e4df..88e89653daa 100644 --- a/drivers/hwmon/hdaps.c +++ b/drivers/hwmon/hdaps.c @@ -515,6 +515,7 @@ static struct dmi_system_id __initdata hdaps_whitelist[] = { HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R50"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R51"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R52"), + HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad R61i"), HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T41p"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T41"), HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T42p"), -- cgit v1.2.3 From b8fdaf5a05adbf80e5a943bb3f65b46b5fb9b488 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Fri, 23 May 2008 13:04:25 -0700 Subject: i5k_amb: support Intel 5400 chipset Minor rework to support the Intel 5400 chipset. Signed-off-by: Darrick J. Wong Cc: "Mark M. Hoffman" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/hwmon/i5k_amb.c | 39 ++++++++++++++++++++++++++++++++++----- 1 file changed, 34 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c index 6ac5c6f5358..f9e2ed621f7 100644 --- a/drivers/hwmon/i5k_amb.c +++ b/drivers/hwmon/i5k_amb.c @@ -111,6 +111,7 @@ struct i5k_amb_data { void __iomem *amb_mmio; struct i5k_device_attribute *attrs; unsigned int num_attrs; + unsigned long chipset_id; }; static ssize_t show_name(struct device *dev, struct device_attribute *devattr, @@ -382,7 +383,8 @@ err: return res; } -static int __devinit i5k_find_amb_registers(struct i5k_amb_data *data) +static int __devinit i5k_find_amb_registers(struct i5k_amb_data *data, + unsigned long devid) { struct pci_dev *pcidev; u32 val32; @@ -390,7 +392,7 @@ static int __devinit i5k_find_amb_registers(struct i5k_amb_data *data) /* Find AMB register memory space */ pcidev = pci_get_device(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_5000_ERR, + devid, NULL); if (!pcidev) return -ENODEV; @@ -409,6 +411,8 @@ static int __devinit i5k_find_amb_registers(struct i5k_amb_data *data) goto out; } + data->chipset_id = devid; + res = 0; out: pci_dev_put(pcidev); @@ -441,10 +445,30 @@ out: return res; } +static unsigned long i5k_channel_pci_id(struct i5k_amb_data *data, + unsigned long channel) +{ + switch (data->chipset_id) { + case PCI_DEVICE_ID_INTEL_5000_ERR: + return PCI_DEVICE_ID_INTEL_5000_FBD0 + channel; + case PCI_DEVICE_ID_INTEL_5400_ERR: + return PCI_DEVICE_ID_INTEL_5400_FBD0 + channel; + default: + BUG(); + } +} + +static unsigned long chipset_ids[] = { + PCI_DEVICE_ID_INTEL_5000_ERR, + PCI_DEVICE_ID_INTEL_5400_ERR, + 0 +}; + static int __devinit i5k_amb_probe(struct platform_device *pdev) { struct i5k_amb_data *data; struct resource *reso; + int i; int res = -ENODEV; data = kzalloc(sizeof(*data), GFP_KERNEL); @@ -452,19 +476,24 @@ static int __devinit i5k_amb_probe(struct platform_device *pdev) return -ENOMEM; /* Figure out where the AMB registers live */ - res = i5k_find_amb_registers(data); + i = 0; + do { + res = i5k_find_amb_registers(data, chipset_ids[i]); + i++; + } while (res && chipset_ids[i]); + if (res) goto err; /* Copy the DIMM presence map for the first two channels */ res = i5k_channel_probe(&data->amb_present[0], - PCI_DEVICE_ID_INTEL_5000_FBD0); + i5k_channel_pci_id(data, 0)); if (res) goto err; /* Copy the DIMM presence map for the optional second two channels */ i5k_channel_probe(&data->amb_present[2], - PCI_DEVICE_ID_INTEL_5000_FBD1); + i5k_channel_pci_id(data, 1)); /* Set up resource regions */ reso = request_mem_region(data->amb_base, data->amb_len, DRVNAME); -- cgit v1.2.3 From 8808a793f052c0a67426a24b961402fa20e92814 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Fri, 23 May 2008 13:04:25 -0700 Subject: ibmaem: new driver for power/energy/temp meters in IBM System X hardware This driver reads IBM Active Energy Manager energy/temperature/power sensors on IBM System X hardware. [akpm@linux-foundation.org: fix printk warnings] Signed-off-by: Darrick J. Wong Cc: "Mark M. Hoffman" Cc: Corey Minyard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/hwmon/Kconfig | 14 + drivers/hwmon/Makefile | 1 + drivers/hwmon/ibmaem.c | 1111 ++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 1126 insertions(+) create mode 100644 drivers/hwmon/ibmaem.c (limited to 'drivers') diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 4dc76bc45c9..00ff5334849 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -330,6 +330,20 @@ config SENSORS_CORETEMP sensor inside your CPU. Supported all are all known variants of Intel Core family. +config SENSORS_IBMAEM + tristate "IBM Active Energy Manager temperature/power sensors and control" + select IPMI_SI + depends on IPMI_HANDLER + help + If you say yes here you get support for the temperature and + power sensors and capping hardware in various IBM System X + servers that support Active Energy Manager. This includes + the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, + and certain HS2x/LS2x/QS2x blades. + + This driver can also be built as a module. If so, the module + will be called ibmaem. + config SENSORS_IBMPEX tristate "IBM PowerExecutive temperature/power sensors" select IPMI_SI diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 3bdb05a5cbd..d098677e08d 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o obj-$(CONFIG_SENSORS_HDAPS) += hdaps.o obj-$(CONFIG_SENSORS_I5K_AMB) += i5k_amb.o +obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o obj-$(CONFIG_SENSORS_IT87) += it87.o obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c new file mode 100644 index 00000000000..5c006c9a431 --- /dev/null +++ b/drivers/hwmon/ibmaem.c @@ -0,0 +1,1111 @@ +/* + * A hwmon driver for the IBM Active Energy Manager temperature/power sensors + * and capping functionality. + * Copyright (C) 2008 IBM + * + * Author: Darrick J. Wong + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define REFRESH_INTERVAL (HZ) +#define IPMI_TIMEOUT (30 * HZ) +#define DRVNAME "aem" + +#define AEM_NETFN 0x2E + +#define AEM_FIND_FW_CMD 0x80 +#define AEM_ELEMENT_CMD 0x81 +#define AEM_FW_INSTANCE_CMD 0x82 + +#define AEM_READ_ELEMENT_CFG 0x80 +#define AEM_READ_BUFFER 0x81 +#define AEM_READ_REGISTER 0x82 +#define AEM_WRITE_REGISTER 0x83 +#define AEM_SET_REG_MASK 0x84 +#define AEM_CLEAR_REG_MASK 0x85 +#define AEM_READ_ELEMENT_CFG2 0x86 + +#define AEM_CONTROL_ELEMENT 0 +#define AEM_ENERGY_ELEMENT 1 +#define AEM_CLOCK_ELEMENT 4 +#define AEM_POWER_CAP_ELEMENT 7 +#define AEM_EXHAUST_ELEMENT 9 +#define AEM_POWER_ELEMENT 10 + +#define AEM_MODULE_TYPE_ID 0x0001 + +#define AEM2_NUM_ENERGY_REGS 2 +#define AEM2_NUM_PCAP_REGS 6 +#define AEM2_NUM_TEMP_REGS 2 +#define AEM2_NUM_SENSORS 14 + +#define AEM1_NUM_ENERGY_REGS 1 +#define AEM1_NUM_SENSORS 3 + +/* AEM 2.x has more energy registers */ +#define AEM_NUM_ENERGY_REGS AEM2_NUM_ENERGY_REGS +/* AEM 2.x needs more sensor files */ +#define AEM_NUM_SENSORS AEM2_NUM_SENSORS + +#define POWER_CAP 0 +#define POWER_CAP_MAX_HOTPLUG 1 +#define POWER_CAP_MAX 2 +#define POWER_CAP_MIN_WARNING 3 +#define POWER_CAP_MIN 4 +#define POWER_AUX 5 + +#define AEM_DEFAULT_POWER_INTERVAL 1000 +#define AEM_MIN_POWER_INTERVAL 200 +#define UJ_PER_MJ 1000L + +static DEFINE_IDR(aem_idr); +static DEFINE_SPINLOCK(aem_idr_lock); + +static struct device_driver aem_driver = { + .name = DRVNAME, + .bus = &platform_bus_type, +}; + +struct aem_ipmi_data { + struct completion read_complete; + struct ipmi_addr address; + ipmi_user_t user; + int interface; + + struct kernel_ipmi_msg tx_message; + long tx_msgid; + + void *rx_msg_data; + unsigned short rx_msg_len; + unsigned char rx_result; + int rx_recv_type; + + struct device *bmc_device; +}; + +struct aem_ro_sensor_template { + char *label; + ssize_t (*show)(struct device *dev, + struct device_attribute *devattr, + char *buf); + int index; +}; + +struct aem_rw_sensor_template { + char *label; + ssize_t (*show)(struct device *dev, + struct device_attribute *devattr, + char *buf); + ssize_t (*set)(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count); + int index; +}; + +struct aem_data { + struct list_head list; + + struct device *hwmon_dev; + struct platform_device *pdev; + struct mutex lock; + char valid; + unsigned long last_updated; /* In jiffies */ + u8 ver_major; + u8 ver_minor; + u8 module_handle; + int id; + struct aem_ipmi_data ipmi; + + /* Function to update sensors */ + void (*update)(struct aem_data *data); + + /* + * AEM 1.x sensors: + * Available sensors: + * Energy meter + * Power meter + * + * AEM 2.x sensors: + * Two energy meters + * Two power meters + * Two temperature sensors + * Six power cap registers + */ + + /* sysfs attrs */ + struct sensor_device_attribute sensors[AEM_NUM_SENSORS]; + + /* energy use in mJ */ + u64 energy[AEM_NUM_ENERGY_REGS]; + + /* power sampling interval in ms */ + unsigned long power_period[AEM_NUM_ENERGY_REGS]; + + /* Everything past here is for AEM2 only */ + + /* power caps in dW */ + u16 pcap[AEM2_NUM_PCAP_REGS]; + + /* exhaust temperature in C */ + u8 temp[AEM2_NUM_TEMP_REGS]; +}; + +/* Data structures returned by the AEM firmware */ +struct aem_iana_id { + u8 bytes[3]; +}; +static struct aem_iana_id system_x_id = { + .bytes = {0x4D, 0x4F, 0x00} +}; + +/* These are used to find AEM1 instances */ +struct aem_find_firmware_req { + struct aem_iana_id id; + u8 rsvd; + u16 index; + u16 module_type_id; +} __packed; + +struct aem_find_firmware_resp { + struct aem_iana_id id; + u8 num_instances; +} __packed; + +/* These are used to find AEM2 instances */ +struct aem_find_instance_req { + struct aem_iana_id id; + u8 instance_number; + u16 module_type_id; +} __packed; + +struct aem_find_instance_resp { + struct aem_iana_id id; + u8 num_instances; + u8 major; + u8 minor; + u8 module_handle; + u16 record_id; +} __packed; + +/* These are used to query sensors */ +struct aem_read_sensor_req { + struct aem_iana_id id; + u8 module_handle; + u8 element; + u8 subcommand; + u8 reg; + u8 rx_buf_size; +} __packed; + +struct aem_read_sensor_resp { + struct aem_iana_id id; + u8 bytes[0]; +} __packed; + +/* Data structures to talk to the IPMI layer */ +struct aem_driver_data { + struct list_head aem_devices; + struct ipmi_smi_watcher bmc_events; + struct ipmi_user_hndl ipmi_hndlrs; +}; + +static void aem_register_bmc(int iface, struct device *dev); +static void aem_bmc_gone(int iface); +static void aem_msg_handler(struct ipmi_recv_msg *msg, void *user_msg_data); + +static void aem_remove_sensors(struct aem_data *data); +static int aem_init_aem1(struct aem_ipmi_data *probe); +static int aem_init_aem2(struct aem_ipmi_data *probe); +static int aem1_find_sensors(struct aem_data *data); +static int aem2_find_sensors(struct aem_data *data); +static void update_aem1_sensors(struct aem_data *data); +static void update_aem2_sensors(struct aem_data *data); + +static struct aem_driver_data driver_data = { + .aem_devices = LIST_HEAD_INIT(driver_data.aem_devices), + .bmc_events = { + .owner = THIS_MODULE, + .new_smi = aem_register_bmc, + .smi_gone = aem_bmc_gone, + }, + .ipmi_hndlrs = { + .ipmi_recv_hndl = aem_msg_handler, + }, +}; + +/* Functions to talk to the IPMI layer */ + +/* Initialize IPMI address, message buffers and user data */ +static int aem_init_ipmi_data(struct aem_ipmi_data *data, int iface, + struct device *bmc) +{ + int err; + + init_completion(&data->read_complete); + data->bmc_device = bmc; + + /* Initialize IPMI address */ + data->address.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + data->address.channel = IPMI_BMC_CHANNEL; + data->address.data[0] = 0; + data->interface = iface; + + /* Initialize message buffers */ + data->tx_msgid = 0; + data->tx_message.netfn = AEM_NETFN; + + /* Create IPMI messaging interface user */ + err = ipmi_create_user(data->interface, &driver_data.ipmi_hndlrs, + data, &data->user); + if (err < 0) { + dev_err(bmc, "Unable to register user with IPMI " + "interface %d\n", data->interface); + return -EACCES; + } + + return 0; +} + +/* Send an IPMI command */ +static int aem_send_message(struct aem_ipmi_data *data) +{ + int err; + + err = ipmi_validate_addr(&data->address, sizeof(data->address)); + if (err) + goto out; + + data->tx_msgid++; + err = ipmi_request_settime(data->user, &data->address, data->tx_msgid, + &data->tx_message, data, 0, 0, 0); + if (err) + goto out1; + + return 0; +out1: + dev_err(data->bmc_device, "request_settime=%x\n", err); + return err; +out: + dev_err(data->bmc_device, "validate_addr=%x\n", err); + return err; +} + +/* Dispatch IPMI messages to callers */ +static void aem_msg_handler(struct ipmi_recv_msg *msg, void *user_msg_data) +{ + unsigned short rx_len; + struct aem_ipmi_data *data = user_msg_data; + + if (msg->msgid != data->tx_msgid) { + dev_err(data->bmc_device, "Mismatch between received msgid " + "(%02x) and transmitted msgid (%02x)!\n", + (int)msg->msgid, + (int)data->tx_msgid); + ipmi_free_recv_msg(msg); + return; + } + + data->rx_recv_type = msg->recv_type; + if (msg->msg.data_len > 0) + data->rx_result = msg->msg.data[0]; + else + data->rx_result = IPMI_UNKNOWN_ERR_COMPLETION_CODE; + + if (msg->msg.data_len > 1) { + rx_len = msg->msg.data_len - 1; + if (data->rx_msg_len < rx_len) + rx_len = data->rx_msg_len; + data->rx_msg_len = rx_len; + memcpy(data->rx_msg_data, msg->msg.data + 1, data->rx_msg_len); + } else + data->rx_msg_len = 0; + + ipmi_free_recv_msg(msg); + complete(&data->read_complete); +} + +/* ID functions */ + +/* Obtain an id */ +static int aem_idr_get(int *id) +{ + int i, err; + +again: + if (unlikely(!idr_pre_get(&aem_idr, GFP_KERNEL))) + return -ENOMEM; + + spin_lock(&aem_idr_lock); + err = idr_get_new(&aem_idr, NULL, &i); + spin_unlock(&aem_idr_lock); + + if (unlikely(err == -EAGAIN)) + goto again; + else if (unlikely(err)) + return err; + + *id = i & MAX_ID_MASK; + return 0; +} + +/* Release an object ID */ +static void aem_idr_put(int id) +{ + spin_lock(&aem_idr_lock); + idr_remove(&aem_idr, id); + spin_unlock(&aem_idr_lock); +} + +/* Sensor support functions */ + +/* Read a sensor value */ +static int aem_read_sensor(struct aem_data *data, u8 elt, u8 reg, + void *buf, size_t size) +{ + int rs_size, res; + struct aem_read_sensor_req rs_req; + struct aem_read_sensor_resp *rs_resp; + struct aem_ipmi_data *ipmi = &data->ipmi; + + /* AEM registers are 1, 2, 4 or 8 bytes */ + switch (size) { + case 1: + case 2: + case 4: + case 8: + break; + default: + return -EINVAL; + } + + rs_req.id = system_x_id; + rs_req.module_handle = data->module_handle; + rs_req.element = elt; + rs_req.subcommand = AEM_READ_REGISTER; + rs_req.reg = reg; + rs_req.rx_buf_size = size; + + ipmi->tx_message.cmd = AEM_ELEMENT_CMD; + ipmi->tx_message.data = (char *)&rs_req; + ipmi->tx_message.data_len = sizeof(rs_req); + + rs_size = sizeof(*rs_resp) + size; + rs_resp = kzalloc(rs_size, GFP_KERNEL); + if (!rs_resp) + return -ENOMEM; + + ipmi->rx_msg_data = rs_resp; + ipmi->rx_msg_len = rs_size; + + aem_send_message(ipmi); + + res = wait_for_completion_timeout(&ipmi->read_complete, IPMI_TIMEOUT); + if (!res) + return -ETIMEDOUT; + + if (ipmi->rx_result || ipmi->rx_msg_len != rs_size || + memcmp(&rs_resp->id, &system_x_id, sizeof(system_x_id))) { + kfree(rs_resp); + return -ENOENT; + } + + switch (size) { + case 1: { + u8 *x = buf; + *x = rs_resp->bytes[0]; + break; + } + case 2: { + u16 *x = buf; + *x = be16_to_cpup((u16 *)rs_resp->bytes); + break; + } + case 4: { + u32 *x = buf; + *x = be32_to_cpup((u32 *)rs_resp->bytes); + break; + } + case 8: { + u64 *x = buf; + *x = be64_to_cpup((u64 *)rs_resp->bytes); + break; + } + } + + return 0; +} + +/* Update AEM energy registers */ +static void update_aem_energy(struct aem_data *data) +{ + aem_read_sensor(data, AEM_ENERGY_ELEMENT, 0, &data->energy[0], 8); + if (data->ver_major < 2) + return; + aem_read_sensor(data, AEM_ENERGY_ELEMENT, 1, &data->energy[1], 8); +} + +/* Update all AEM1 sensors */ +static void update_aem1_sensors(struct aem_data *data) +{ + mutex_lock(&data->lock); + if (time_before(jiffies, data->last_updated + REFRESH_INTERVAL) && + data->valid) + goto out; + + update_aem_energy(data); +out: + mutex_unlock(&data->lock); +} + +/* Update all AEM2 sensors */ +static void update_aem2_sensors(struct aem_data *data) +{ + int i; + + mutex_lock(&data->lock); + if (time_before(jiffies, data->last_updated + REFRESH_INTERVAL) && + data->valid) + goto out; + + update_aem_energy(data); + aem_read_sensor(data, AEM_EXHAUST_ELEMENT, 0, &data->temp[0], 1); + aem_read_sensor(data, AEM_EXHAUST_ELEMENT, 1, &data->temp[1], 1); + + for (i = POWER_CAP; i <= POWER_AUX; i++) + aem_read_sensor(data, AEM_POWER_CAP_ELEMENT, i, + &data->pcap[i], 2); +out: + mutex_unlock(&data->lock); +} + +/* Delete an AEM instance */ +static void aem_delete(struct aem_data *data) +{ + list_del(&data->list); + aem_remove_sensors(data); + hwmon_device_unregister(data->hwmon_dev); + ipmi_destroy_user(data->ipmi.user); + dev_set_drvdata(&data->pdev->dev, NULL); + platform_device_unregister(data->pdev); + aem_idr_put(data->id); + kfree(data); +} + +/* Probe functions for AEM1 devices */ + +/* Retrieve version and module handle for an AEM1 instance */ +static int aem_find_aem1_count(struct aem_ipmi_data *data) +{ + int res; + struct aem_find_firmware_req ff_req; + struct aem_find_firmware_resp ff_resp; + + ff_req.id = system_x_id; + ff_req.index = 0; + ff_req.module_type_id = cpu_to_be16(AEM_MODULE_TYPE_ID); + + data->tx_message.cmd = AEM_FIND_FW_CMD; + data->tx_message.data = (char *)&ff_req; + data->tx_message.data_len = sizeof(ff_req); + + data->rx_msg_data = &ff_resp; + data->rx_msg_len = sizeof(ff_resp); + + aem_send_message(data); + + res = wait_for_completion_timeout(&data->read_complete, IPMI_TIMEOUT); + if (!res) + return -ETIMEDOUT; + + if (data->rx_result || data->rx_msg_len != sizeof(ff_resp) || + memcmp(&ff_resp.id, &system_x_id, sizeof(system_x_id))) + return -ENOENT; + + return ff_resp.num_instances; +} + +/* Find and initialize one AEM1 instance */ +static int aem_init_aem1_inst(struct aem_ipmi_data *probe, u8 module_handle) +{ + struct aem_data *data; + int i; + int res = -ENOMEM; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return res; + mutex_init(&data->lock); + + /* Copy instance data */ + data->ver_major = 1; + data->ver_minor = 0; + data->module_handle = module_handle; + for (i = 0; i < AEM1_NUM_ENERGY_REGS; i++) + data->power_period[i] = AEM_DEFAULT_POWER_INTERVAL; + + /* Create sub-device for this fw instance */ + if (aem_idr_get(&data->id)) + goto id_err; + + data->pdev = platform_device_alloc(DRVNAME, data->id); + if (!data->pdev) + goto dev_err; + data->pdev->dev.driver = &aem_driver; + + res = platform_device_add(data->pdev); + if (res) + goto ipmi_err; + + dev_set_drvdata(&data->pdev->dev, data); + + /* Set up IPMI interface */ + if (aem_init_ipmi_data(&data->ipmi, probe->interface, + probe->bmc_device)) + goto ipmi_err; + + /* Register with hwmon */ + data->hwmon_dev = hwmon_device_register(&data->pdev->dev); + + if (IS_ERR(data->hwmon_dev)) { + dev_err(&data->pdev->dev, "Unable to register hwmon " + "device for IPMI interface %d\n", + probe->interface); + goto hwmon_reg_err; + } + + data->update = update_aem1_sensors; + + /* Find sensors */ + if (aem1_find_sensors(data)) + goto sensor_err; + + /* Add to our list of AEM devices */ + list_add_tail(&data->list, &driver_data.aem_devices); + + dev_info(data->ipmi.bmc_device, "Found AEM v%d.%d at 0x%X\n", + data->ver_major, data->ver_minor, + data->module_handle); + return 0; + +sensor_err: + hwmon_device_unregister(data->hwmon_dev); +hwmon_reg_err: + ipmi_destroy_user(data->ipmi.user); +ipmi_err: + dev_set_drvdata(&data->pdev->dev, NULL); + platform_device_unregister(data->pdev); +dev_err: + aem_idr_put(data->id); +id_err: + kfree(data); + + return res; +} + +/* Find and initialize all AEM1 instances */ +static int aem_init_aem1(struct aem_ipmi_data *probe) +{ + int num, i, err; + + num = aem_find_aem1_count(probe); + for (i = 0; i < num; i++) { + err = aem_init_aem1_inst(probe, i); + if (err) { + dev_err(probe->bmc_device, + "Error %d initializing AEM1 0x%X\n", + err, i); + return err; + } + } + + return 0; +} + +/* Probe functions for AEM2 devices */ + +/* Retrieve version and module handle for an AEM2 instance */ +static int aem_find_aem2(struct aem_ipmi_data *data, + struct aem_find_instance_resp *fi_resp, + int instance_num) +{ + int res; + struct aem_find_instance_req fi_req; + + fi_req.id = system_x_id; + fi_req.instance_number = instance_num; + fi_req.module_type_id = cpu_to_be16(AEM_MODULE_TYPE_ID); + + data->tx_message.cmd = AEM_FW_INSTANCE_CMD; + data->tx_message.data = (char *)&fi_req; + data->tx_message.data_len = sizeof(fi_req); + + data->rx_msg_data = fi_resp; + data->rx_msg_len = sizeof(*fi_resp); + + aem_send_message(data); + + res = wait_for_completion_timeout(&data->read_complete, IPMI_TIMEOUT); + if (!res) + return -ETIMEDOUT; + + if (data->rx_result || data->rx_msg_len != sizeof(*fi_resp) || + memcmp(&fi_resp->id, &system_x_id, sizeof(system_x_id))) + return -ENOENT; + + return 0; +} + +/* Find and initialize one AEM2 instance */ +static int aem_init_aem2_inst(struct aem_ipmi_data *probe, + struct aem_find_instance_resp *fi_resp) +{ + struct aem_data *data; + int i; + int res = -ENOMEM; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return res; + mutex_init(&data->lock); + + /* Copy instance data */ + data->ver_major = fi_resp->major; + data->ver_minor = fi_resp->minor; + data->module_handle = fi_resp->module_handle; + for (i = 0; i < AEM2_NUM_ENERGY_REGS; i++) + data->power_period[i] = AEM_DEFAULT_POWER_INTERVAL; + + /* Create sub-device for this fw instance */ + if (aem_idr_get(&data->id)) + goto id_err; + + data->pdev = platform_device_alloc(DRVNAME, data->id); + if (!data->pdev) + goto dev_err; + data->pdev->dev.driver = &aem_driver; + + res = platform_device_add(data->pdev); + if (res) + goto ipmi_err; + + dev_set_drvdata(&data->pdev->dev, data); + + /* Set up IPMI interface */ + if (aem_init_ipmi_data(&data->ipmi, probe->interface, + probe->bmc_device)) + goto ipmi_err; + + /* Register with hwmon */ + data->hwmon_dev = hwmon_device_register(&data->pdev->dev); + + if (IS_ERR(data->hwmon_dev)) { + dev_err(&data->pdev->dev, "Unable to register hwmon " + "device for IPMI interface %d\n", + probe->interface); + goto hwmon_reg_err; + } + + data->update = update_aem2_sensors; + + /* Find sensors */ + if (aem2_find_sensors(data)) + goto sensor_err; + + /* Add to our list of AEM devices */ + list_add_tail(&data->list, &driver_data.aem_devices); + + dev_info(data->ipmi.bmc_device, "Found AEM v%d.%d at 0x%X\n", + data->ver_major, data->ver_minor, + data->module_handle); + return 0; + +sensor_err: + hwmon_device_unregister(data->hwmon_dev); +hwmon_reg_err: + ipmi_destroy_user(data->ipmi.user); +ipmi_err: + dev_set_drvdata(&data->pdev->dev, NULL); + platform_device_unregister(data->pdev); +dev_err: + aem_idr_put(data->id); +id_err: + kfree(data); + + return res; +} + +/* Find and initialize all AEM2 instances */ +static int aem_init_aem2(struct aem_ipmi_data *probe) +{ + struct aem_find_instance_resp fi_resp; + int err; + int i = 0; + + while (!aem_find_aem2(probe, &fi_resp, i)) { + if (fi_resp.major != 2) { + dev_err(probe->bmc_device, "Unknown AEM v%d; please " + "report this to the maintainer.\n", + fi_resp.major); + i++; + continue; + } + err = aem_init_aem2_inst(probe, &fi_resp); + if (err) { + dev_err(probe->bmc_device, + "Error %d initializing AEM2 0x%X\n", + err, fi_resp.module_handle); + return err; + } + i++; + } + + return 0; +} + +/* Probe a BMC for AEM firmware instances */ +static void aem_register_bmc(int iface, struct device *dev) +{ + struct aem_ipmi_data probe; + + if (aem_init_ipmi_data(&probe, iface, dev)) + return; + + /* Ignore probe errors; they won't cause problems */ + aem_init_aem1(&probe); + aem_init_aem2(&probe); + + ipmi_destroy_user(probe.user); +} + +/* Handle BMC deletion */ +static void aem_bmc_gone(int iface) +{ + struct aem_data *p1, *next1; + + list_for_each_entry_safe(p1, next1, &driver_data.aem_devices, list) + if (p1->ipmi.interface == iface) + aem_delete(p1); +} + +/* sysfs support functions */ + +/* AEM device name */ +static ssize_t show_name(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct aem_data *data = dev_get_drvdata(dev); + + return sprintf(buf, "%s%d\n", DRVNAME, data->ver_major); +} +static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, 0); + +/* AEM device version */ +static ssize_t show_version(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct aem_data *data = dev_get_drvdata(dev); + + return sprintf(buf, "%d.%d\n", data->ver_major, data->ver_minor); +} +static SENSOR_DEVICE_ATTR(version, S_IRUGO, show_version, NULL, 0); + +/* Display power use */ +static ssize_t aem_show_power(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct aem_data *data = dev_get_drvdata(dev); + u64 before, after, delta, time; + signed long leftover; + struct timespec b, a; + + mutex_lock(&data->lock); + update_aem_energy(data); + getnstimeofday(&b); + before = data->energy[attr->index]; + + leftover = schedule_timeout_interruptible( + msecs_to_jiffies(data->power_period[attr->index]) + ); + if (leftover) { + mutex_unlock(&data->lock); + return 0; + } + + update_aem_energy(data); + getnstimeofday(&a); + after = data->energy[attr->index]; + mutex_unlock(&data->lock); + + time = timespec_to_ns(&a) - timespec_to_ns(&b); + delta = (after - before) * UJ_PER_MJ; + + return sprintf(buf, "%llu\n", + (unsigned long long)div64_u64(delta * NSEC_PER_SEC, time)); +} + +/* Display energy use */ +static ssize_t aem_show_energy(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct aem_data *a = dev_get_drvdata(dev); + a->update(a); + + return sprintf(buf, "%llu\n", + (unsigned long long)a->energy[attr->index] * 1000); +} + +/* Display power interval registers */ +static ssize_t aem_show_power_period(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct aem_data *a = dev_get_drvdata(dev); + a->update(a); + + return sprintf(buf, "%lu\n", a->power_period[attr->index]); +} + +/* Set power interval registers */ +static ssize_t aem_set_power_period(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct aem_data *a = dev_get_drvdata(dev); + unsigned long temp; + int res; + + res = strict_strtoul(buf, 10, &temp); + if (res) + return res; + + if (temp < AEM_MIN_POWER_INTERVAL) + return -EINVAL; + + mutex_lock(&a->lock); + a->power_period[attr->index] = temp; + mutex_unlock(&a->lock); + + return count; +} + +/* Discover sensors on an AEM device */ +static int aem_register_sensors(struct aem_data *data, + struct aem_ro_sensor_template *ro, + struct aem_rw_sensor_template *rw) +{ + struct device *dev = &data->pdev->dev; + struct sensor_device_attribute *sensors = data->sensors; + int err; + + /* Set up read-only sensors */ + while (ro->label) { + sensors->dev_attr.attr.name = ro->label; + sensors->dev_attr.attr.mode = S_IRUGO; + sensors->dev_attr.show = ro->show; + sensors->index = ro->index; + + err = device_create_file(dev, &sensors->dev_attr); + if (err) { + sensors->dev_attr.attr.name = NULL; + goto error; + } + sensors++; + ro++; + } + + /* Set up read-write sensors */ + while (rw->label) { + sensors->dev_attr.attr.name = rw->label; + sensors->dev_attr.attr.mode = S_IRUGO | S_IWUSR; + sensors->dev_attr.show = rw->show; + sensors->dev_attr.store = rw->set; + sensors->index = rw->index; + + err = device_create_file(dev, &sensors->dev_attr); + if (err) { + sensors->dev_attr.attr.name = NULL; + goto error; + } + sensors++; + rw++; + } + + err = device_create_file(dev, &sensor_dev_attr_name.dev_attr); + if (err) + goto error; + err = device_create_file(dev, &sensor_dev_attr_version.dev_attr); + return err; + +error: + aem_remove_sensors(data); + return err; +} + +/* sysfs support functions for AEM2 sensors */ + +/* Display temperature use */ +static ssize_t aem2_show_temp(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct aem_data *a = dev_get_drvdata(dev); + a->update(a); + + return sprintf(buf, "%u\n", a->temp[attr->index] * 1000); +} + +/* Display power-capping registers */ +static ssize_t aem2_show_pcap_value(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct aem_data *a = dev_get_drvdata(dev); + a->update(a); + + return sprintf(buf, "%u\n", a->pcap[attr->index] * 100000); +} + +/* Remove sensors attached to an AEM device */ +static void aem_remove_sensors(struct aem_data *data) +{ + int i; + + for (i = 0; i < AEM_NUM_SENSORS; i++) { + if (!data->sensors[i].dev_attr.attr.name) + continue; + device_remove_file(&data->pdev->dev, + &data->sensors[i].dev_attr); + } + + device_remove_file(&data->pdev->dev, + &sensor_dev_attr_name.dev_attr); + device_remove_file(&data->pdev->dev, + &sensor_dev_attr_version.dev_attr); +} + +/* Sensor probe functions */ + +/* Description of AEM1 sensors */ +static struct aem_ro_sensor_template aem1_ro_sensors[] = { +{"energy1_input", aem_show_energy, 0}, +{"power1_average", aem_show_power, 0}, +{NULL, NULL, 0}, +}; + +static struct aem_rw_sensor_template aem1_rw_sensors[] = { +{"power1_average_interval", aem_show_power_period, aem_set_power_period, 0}, +{NULL, NULL, NULL, 0}, +}; + +/* Description of AEM2 sensors */ +static struct aem_ro_sensor_template aem2_ro_sensors[] = { +{"energy1_input", aem_show_energy, 0}, +{"energy2_input", aem_show_energy, 1}, +{"power1_average", aem_show_power, 0}, +{"power2_average", aem_show_power, 1}, +{"temp1_input", aem2_show_temp, 0}, +{"temp2_input", aem2_show_temp, 1}, + +{"power4_average", aem2_show_pcap_value, POWER_CAP_MAX_HOTPLUG}, +{"power5_average", aem2_show_pcap_value, POWER_CAP_MAX}, +{"power6_average", aem2_show_pcap_value, POWER_CAP_MIN_WARNING}, +{"power7_average", aem2_show_pcap_value, POWER_CAP_MIN}, + +{"power3_average", aem2_show_pcap_value, POWER_AUX}, +{"power_cap", aem2_show_pcap_value, POWER_CAP}, +{NULL, NULL, 0}, +}; + +static struct aem_rw_sensor_template aem2_rw_sensors[] = { +{"power1_average_interval", aem_show_power_period, aem_set_power_period, 0}, +{"power2_average_interval", aem_show_power_period, aem_set_power_period, 1}, +{NULL, NULL, NULL, 0}, +}; + +/* Set up AEM1 sensor attrs */ +static int aem1_find_sensors(struct aem_data *data) +{ + return aem_register_sensors(data, aem1_ro_sensors, aem1_rw_sensors); +} + +/* Set up AEM2 sensor attrs */ +static int aem2_find_sensors(struct aem_data *data) +{ + return aem_register_sensors(data, aem2_ro_sensors, aem2_rw_sensors); +} + +/* Module init/exit routines */ + +static int __init aem_init(void) +{ + int res; + + res = driver_register(&aem_driver); + if (res) { + printk(KERN_ERR "Can't register aem driver\n"); + return res; + } + + res = ipmi_smi_watcher_register(&driver_data.bmc_events); + if (res) + goto ipmi_reg_err; + return 0; + +ipmi_reg_err: + driver_unregister(&aem_driver); + return res; + +} + +static void __exit aem_exit(void) +{ + struct aem_data *p1, *next1; + + ipmi_smi_watcher_unregister(&driver_data.bmc_events); + driver_unregister(&aem_driver); + list_for_each_entry_safe(p1, next1, &driver_data.aem_devices, list) + aem_delete(p1); +} + +MODULE_AUTHOR("Darrick J. Wong "); +MODULE_DESCRIPTION("IBM Active Energy Manager power/temp sensor driver"); +MODULE_LICENSE("GPL"); + +module_init(aem_init); +module_exit(aem_exit); -- cgit v1.2.3 From 4b6f6ce97ecc20eb8f3ece3c8370faacfe73e8c2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ignacio=20Garc=C3=ADa=20P=C3=A9rez?= Date: Fri, 23 May 2008 13:04:28 -0700 Subject: serial: support for InstaShield IS-400 four port RS-232 PCI card MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add support for the InstaShield IS-400 four port RS-232 PCI card. Signed-off-by: Ignacio GarcĂ­a PĂ©rez Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/8250_pci.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 53fa19cf2f0..788c3559522 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -2602,7 +2602,12 @@ static struct pci_device_id serial_pci_tbl[] = { { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200, PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0811 */ pbn_b2_2_115200 }, - + /* + * IntaShield IS-400 + */ + { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS400, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0dc0 */ + pbn_b2_4_115200 }, /* * Perle PCI-RAS cards */ -- cgit v1.2.3 From 84255d1018c50e72c71a49f359989597d53a3f53 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 23 May 2008 13:04:32 -0700 Subject: md: fix possible oops when removing a bitmap from an active array It is possible to add a write-intent bitmap to an active array, or remove the bitmap that is there. When we do with the 'quiesce' the array, which causes make_request to block in "wait_barrier()". However we are sampling the value of "mddev->bitmap" before the wait_barrier call, and using it afterwards. This can result in using a bitmap structure that has been freed. Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/md/raid1.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index ac409b7d83f..21629ae4668 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -773,7 +773,7 @@ static int make_request(struct request_queue *q, struct bio * bio) r1bio_t *r1_bio; struct bio *read_bio; int i, targets = 0, disks; - struct bitmap *bitmap = mddev->bitmap; + struct bitmap *bitmap; unsigned long flags; struct bio_list bl; struct page **behind_pages = NULL; @@ -802,6 +802,8 @@ static int make_request(struct request_queue *q, struct bio * bio) wait_barrier(conf); + bitmap = mddev->bitmap; + disk_stat_inc(mddev->gendisk, ios[rw]); disk_stat_add(mddev->gendisk, sectors[rw], bio_sectors(bio)); -- cgit v1.2.3 From 6bcfd601861cce45ca73ac1d714f1286b6b3f0d4 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 23 May 2008 13:04:34 -0700 Subject: md: kill file_path wrapper Kill the trivial and rather pointless file_path wrapper around d_path. Signed-off-by: Christoph Hellwig Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/md/bitmap.c | 17 ++++------------- drivers/md/md.c | 4 ++-- 2 files changed, 6 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index c14dacdacfa..b26927ce889 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -203,17 +203,6 @@ static void bitmap_checkfree(struct bitmap *bitmap, unsigned long page) * bitmap file handling - read and write the bitmap file and its superblock */ -/* copy the pathname of a file to a buffer */ -char *file_path(struct file *file, char *buf, int count) -{ - if (!buf) - return NULL; - - buf = d_path(&file->f_path, buf, count); - - return IS_ERR(buf) ? NULL : buf; -} - /* * basic page I/O operations */ @@ -721,11 +710,13 @@ static void bitmap_file_kick(struct bitmap *bitmap) if (bitmap->file) { path = kmalloc(PAGE_SIZE, GFP_KERNEL); if (path) - ptr = file_path(bitmap->file, path, PAGE_SIZE); + ptr = d_path(&bitmap->file->f_path, path, + PAGE_SIZE); + printk(KERN_ALERT "%s: kicking failed bitmap file %s from array!\n", - bmname(bitmap), ptr ? ptr : ""); + bmname(bitmap), IS_ERR(ptr) ? "" : ptr); kfree(path); } else diff --git a/drivers/md/md.c b/drivers/md/md.c index 83eb78b0013..d31aa6f33a6 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3987,8 +3987,8 @@ static int get_bitmap_file(mddev_t * mddev, void __user * arg) if (!buf) goto out; - ptr = file_path(mddev->bitmap->file, buf, sizeof(file->pathname)); - if (!ptr) + ptr = d_path(&mddev->bitmap->file->f_path, buf, sizeof(file->pathname)); + if (IS_ERR(ptr)) goto out; strcpy(file->pathname, ptr); -- cgit v1.2.3 From 6be9d4940134b36f9ed020aead36f831f19b49f1 Mon Sep 17 00:00:00 2001 From: Bernd Schubert Date: Fri, 23 May 2008 13:04:34 -0700 Subject: md: md: raid5 rate limit error printk Last night we had scsi problems and a hardware raid unit was offlined during heavy i/o. While this happened we got for about 3 minutes a huge number messages like these Apr 12 03:36:07 pfs1n14 kernel: [197510.696595] raid5:md7: read error not correctable (sector 2993096568 on sdj2). I guess the high error rate is responsible for not scheduling other events - during this time the system was not pingable and in the end also other devices run into scsi command timeouts causing problems on these unrelated devices as well. Signed-off-by: Bernd Schubert Signed-off-by: Dan Williams Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/md/raid5.c | 34 ++++++++++++++++++++++------------ 1 file changed, 22 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 93fde48c0f4..2f28745dacf 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -94,6 +94,8 @@ #define __inline__ #endif +#define printk_rl(args...) ((void) (printk_ratelimit() && printk(args))) + #if !RAID6_USE_EMPTY_ZERO_PAGE /* In .bss so it's zeroed */ const char raid6_empty_zero_page[PAGE_SIZE] __attribute__((aligned(256))); @@ -1143,10 +1145,12 @@ static void raid5_end_read_request(struct bio * bi, int error) set_bit(R5_UPTODATE, &sh->dev[i].flags); if (test_bit(R5_ReadError, &sh->dev[i].flags)) { rdev = conf->disks[i].rdev; - printk(KERN_INFO "raid5:%s: read error corrected (%lu sectors at %llu on %s)\n", - mdname(conf->mddev), STRIPE_SECTORS, - (unsigned long long)(sh->sector + rdev->data_offset), - bdevname(rdev->bdev, b)); + printk_rl(KERN_INFO "raid5:%s: read error corrected" + " (%lu sectors at %llu on %s)\n", + mdname(conf->mddev), STRIPE_SECTORS, + (unsigned long long)(sh->sector + + rdev->data_offset), + bdevname(rdev->bdev, b)); clear_bit(R5_ReadError, &sh->dev[i].flags); clear_bit(R5_ReWrite, &sh->dev[i].flags); } @@ -1160,16 +1164,22 @@ static void raid5_end_read_request(struct bio * bi, int error) clear_bit(R5_UPTODATE, &sh->dev[i].flags); atomic_inc(&rdev->read_errors); if (conf->mddev->degraded) - printk(KERN_WARNING "raid5:%s: read error not correctable (sector %llu on %s).\n", - mdname(conf->mddev), - (unsigned long long)(sh->sector + rdev->data_offset), - bdn); + printk_rl(KERN_WARNING + "raid5:%s: read error not correctable " + "(sector %llu on %s).\n", + mdname(conf->mddev), + (unsigned long long)(sh->sector + + rdev->data_offset), + bdn); else if (test_bit(R5_ReWrite, &sh->dev[i].flags)) /* Oh, no!!! */ - printk(KERN_WARNING "raid5:%s: read error NOT corrected!! (sector %llu on %s).\n", - mdname(conf->mddev), - (unsigned long long)(sh->sector + rdev->data_offset), - bdn); + printk_rl(KERN_WARNING + "raid5:%s: read error NOT corrected!! " + "(sector %llu on %s).\n", + mdname(conf->mddev), + (unsigned long long)(sh->sector + + rdev->data_offset), + bdn); else if (atomic_read(&rdev->read_errors) > conf->max_nr_stripes) printk(KERN_WARNING -- cgit v1.2.3 From 698b18c1e8bddf39cbf1ba50792b0fe302dbe6d6 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 23 May 2008 13:04:35 -0700 Subject: md: raid1: Fix restoration of bio between failed read and write. When performing a "recovery" or "check" pass on a RAID1 array, we read from each device and possible, if there is a difference or a read error, write back to some devices. We use the same 'bio' for both read and write, resetting various fields between the two operations. We forgot to reset bv_offset and bv_len however. These are often left unchanged, but in the case where there is an IO error one or two sectors into a page, they are changed. This results in correctable errors not being corrected properly. It does not result in any data corruption. Cc: "Fairbanks, David" Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/md/raid1.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 21629ae4668..d0f4021bbc2 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1284,6 +1284,7 @@ static void sync_request_write(mddev_t *mddev, r1bio_t *r1_bio) rdev_dec_pending(conf->mirrors[i].rdev, mddev); } else { /* fixup the bio for reuse */ + int size; sbio->bi_vcnt = vcnt; sbio->bi_size = r1_bio->sectors << 9; sbio->bi_idx = 0; @@ -1297,10 +1298,20 @@ static void sync_request_write(mddev_t *mddev, r1bio_t *r1_bio) sbio->bi_sector = r1_bio->sector + conf->mirrors[i].rdev->data_offset; sbio->bi_bdev = conf->mirrors[i].rdev->bdev; - for (j = 0; j < vcnt ; j++) - memcpy(page_address(sbio->bi_io_vec[j].bv_page), + size = sbio->bi_size; + for (j = 0; j < vcnt ; j++) { + struct bio_vec *bi; + bi = &sbio->bi_io_vec[j]; + bi->bv_offset = 0; + if (size > PAGE_SIZE) + bi->bv_len = PAGE_SIZE; + else + bi->bv_len = size; + size -= PAGE_SIZE; + memcpy(page_address(bi->bv_page), page_address(pbio->bi_io_vec[j].bv_page), PAGE_SIZE); + } } } -- cgit v1.2.3 From 09a44cc15079f80c1416cde1a1d5b2cdd8f2118a Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 23 May 2008 13:04:36 -0700 Subject: md: notify userspace on 'write-pending' changes to array_state When an array enters write pending, 'array_state' changes, so we must be sure to sysfs_notify. Also, when waiting for user-space to acknowledge 'write-pending' by marking the metadata as dirty, we don't want to wait for MD_CHANGE_DEVS to be cleared as that might not happen. So explicity test for the bits that we are really interested in. Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/md/md.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index d31aa6f33a6..52f9865096c 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -5435,8 +5435,11 @@ void md_write_start(mddev_t *mddev, struct bio *bi) md_wakeup_thread(mddev->thread); } spin_unlock_irq(&mddev->write_lock); + sysfs_notify(&mddev->kobj, NULL, "array_state"); } - wait_event(mddev->sb_wait, mddev->flags==0); + wait_event(mddev->sb_wait, + !test_bit(MD_CHANGE_CLEAN, &mddev->flags) && + !test_bit(MD_CHANGE_PENDING, &mddev->flags)); } void md_write_end(mddev_t *mddev) @@ -5471,6 +5474,12 @@ void md_allow_write(mddev_t *mddev) mddev->safemode = 1; spin_unlock_irq(&mddev->write_lock); md_update_sb(mddev, 0); + + sysfs_notify(&mddev->kobj, NULL, "array_state"); + /* wait for the dirty state to be recorded in the metadata */ + wait_event(mddev->sb_wait, + !test_bit(MD_CHANGE_CLEAN, &mddev->flags) && + !test_bit(MD_CHANGE_PENDING, &mddev->flags)); } else spin_unlock_irq(&mddev->write_lock); } -- cgit v1.2.3 From 4f54b0e9485644a3c5fca2ae43bcbe7376825747 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 23 May 2008 13:04:37 -0700 Subject: md: notify userspace on 'stop' events This additional notification to 'array_state' is needed to allow the monitor application to learn about stop events via sysfs. The sysfs_notify("sync_action") call that comes at the end of do_md_stop() (via md_new_event) is insufficient since the 'sync_action' attribute has been removed by this point. (Seems like a sysfs-notify-on-removal patch is a better fix. Currently removal updates the event count but does not wake up waiters) Signed-off-by: Dan Williams Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/md/md.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index 52f9865096c..e57213dacd2 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3691,6 +3691,8 @@ static int do_md_stop(mddev_t * mddev, int mode) module_put(mddev->pers->owner); mddev->pers = NULL; + /* tell userspace to handle 'inactive' */ + sysfs_notify(&mddev->kobj, NULL, "array_state"); set_capacity(disk, 0); mddev->changed = 1; -- cgit v1.2.3 From 90b08710e41a07d4ff0fb8940dcce3a552991a56 Mon Sep 17 00:00:00 2001 From: Bernd Schubert Date: Fri, 23 May 2008 13:04:38 -0700 Subject: md: allow parallel resync of md-devices. In some configurations, a raid6 resync can be limited by CPU speed (Calculating P and Q and moving data) rather than by device speed. In these cases there is nothing to be gained byt serialising resync of arrays that share a device, and doing the resync in parallel can provide benefit. So add a sysfs tunable to flag an array as being allowed to resync in parallel with other arrays that use (a different part of) the same device. Signed-off-by: Bernd Schubert Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/md/md.c | 40 ++++++++++++++++++++++++++++++++++++---- 1 file changed, 36 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index e57213dacd2..295be1a6880 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -74,6 +74,8 @@ static DEFINE_SPINLOCK(pers_lock); static void md_print_devices(void); +static DECLARE_WAIT_QUEUE_HEAD(resync_wait); + #define MD_BUG(x...) { printk("md: bug in file %s, line %d\n", __FILE__, __LINE__); md_print_devices(); } /* @@ -3012,6 +3014,36 @@ degraded_show(mddev_t *mddev, char *page) } static struct md_sysfs_entry md_degraded = __ATTR_RO(degraded); +static ssize_t +sync_force_parallel_show(mddev_t *mddev, char *page) +{ + return sprintf(page, "%d\n", mddev->parallel_resync); +} + +static ssize_t +sync_force_parallel_store(mddev_t *mddev, const char *buf, size_t len) +{ + long n; + + if (strict_strtol(buf, 10, &n)) + return -EINVAL; + + if (n != 0 && n != 1) + return -EINVAL; + + mddev->parallel_resync = n; + + if (mddev->sync_thread) + wake_up(&resync_wait); + + return len; +} + +/* force parallel resync, even with shared block devices */ +static struct md_sysfs_entry md_sync_force_parallel = +__ATTR(sync_force_parallel, S_IRUGO|S_IWUSR, + sync_force_parallel_show, sync_force_parallel_store); + static ssize_t sync_speed_show(mddev_t *mddev, char *page) { @@ -3187,6 +3219,7 @@ static struct attribute *md_redundancy_attrs[] = { &md_sync_min.attr, &md_sync_max.attr, &md_sync_speed.attr, + &md_sync_force_parallel.attr, &md_sync_completed.attr, &md_max_sync.attr, &md_suspend_lo.attr, @@ -5487,8 +5520,6 @@ void md_allow_write(mddev_t *mddev) } EXPORT_SYMBOL_GPL(md_allow_write); -static DECLARE_WAIT_QUEUE_HEAD(resync_wait); - #define SYNC_MARKS 10 #define SYNC_MARK_STEP (3*HZ) void md_do_sync(mddev_t *mddev) @@ -5552,8 +5583,9 @@ void md_do_sync(mddev_t *mddev) for_each_mddev(mddev2, tmp) { if (mddev2 == mddev) continue; - if (mddev2->curr_resync && - match_mddev_units(mddev,mddev2)) { + if (!mddev->parallel_resync + && mddev2->curr_resync + && match_mddev_units(mddev, mddev2)) { DEFINE_WAIT(wq); if (mddev < mddev2 && mddev->curr_resync == 2) { /* arbitrarily yield */ -- cgit v1.2.3 From dfc7064500061677720fa26352963c772d3ebe6b Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 23 May 2008 13:04:39 -0700 Subject: md: restart recovery cleanly after device failure. When we get any IO error during a recovery (rebuilding a spare), we abort the recovery and restart it. For RAID6 (and multi-drive RAID1) it may not be best to restart at the beginning: when multiple failures can be tolerated, the recovery may be able to continue and re-doing all that has already been done doesn't make sense. We already have the infrastructure to record where a recovery is up to and restart from there, but it is not being used properly. This is because: - We sometimes abort with MD_RECOVERY_ERR rather than just MD_RECOVERY_INTR, which causes the recovery not be be checkpointed. - We remove spares and then re-added them which loses important state information. The distinction between MD_RECOVERY_ERR and MD_RECOVERY_INTR really isn't needed. If there is an error, the relevant drive will be marked as Faulty, and that is enough to ensure correct handling of the error. So we first remove MD_RECOVERY_ERR, changing some of the uses of it to MD_RECOVERY_INTR. Then we cause the attempt to remove a non-faulty device from an array to fail (unless recovery is impossible as the array is too degraded). Then when remove_and_add_spares attempts to remove the devices on which recovery can continue, it will fail, they will remain in place, and recovery will continue on them as desired. Issue: If we are halfway through rebuilding a spare and another drive fails, and a new spare is immediately available, do we want to: 1/ complete the current rebuild, then go back and rebuild the new spare or 2/ restart the rebuild from the start and rebuild both devices in parallel. Both options can be argued for. The code currently takes option 2 as a/ this requires least code change b/ this results in a minimally-degraded array in minimal time. Cc: "Eivind Sarto" Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/md/md.c | 22 +++++++++++----------- drivers/md/multipath.c | 3 ++- drivers/md/raid1.c | 10 +++++++++- drivers/md/raid10.c | 14 ++++++++++++-- drivers/md/raid5.c | 10 +++++++++- 5 files changed, 43 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index 295be1a6880..51c19f86ff9 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -5434,7 +5434,7 @@ void md_done_sync(mddev_t *mddev, int blocks, int ok) atomic_sub(blocks, &mddev->recovery_active); wake_up(&mddev->recovery_wait); if (!ok) { - set_bit(MD_RECOVERY_ERR, &mddev->recovery); + set_bit(MD_RECOVERY_INTR, &mddev->recovery); md_wakeup_thread(mddev->thread); // stop recovery, signal do_sync .... } @@ -5690,7 +5690,7 @@ void md_do_sync(mddev_t *mddev) sectors = mddev->pers->sync_request(mddev, j, &skipped, currspeed < speed_min(mddev)); if (sectors == 0) { - set_bit(MD_RECOVERY_ERR, &mddev->recovery); + set_bit(MD_RECOVERY_INTR, &mddev->recovery); goto out; } @@ -5713,8 +5713,7 @@ void md_do_sync(mddev_t *mddev) last_check = io_sectors; - if (test_bit(MD_RECOVERY_INTR, &mddev->recovery) || - test_bit(MD_RECOVERY_ERR, &mddev->recovery)) + if (test_bit(MD_RECOVERY_INTR, &mddev->recovery)) break; repeat: @@ -5768,8 +5767,7 @@ void md_do_sync(mddev_t *mddev) /* tell personality that we are finished */ mddev->pers->sync_request(mddev, max_sectors, &skipped, 1); - if (!test_bit(MD_RECOVERY_ERR, &mddev->recovery) && - !test_bit(MD_RECOVERY_CHECK, &mddev->recovery) && + if (!test_bit(MD_RECOVERY_CHECK, &mddev->recovery) && mddev->curr_resync > 2) { if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) { if (test_bit(MD_RECOVERY_INTR, &mddev->recovery)) { @@ -5838,7 +5836,10 @@ static int remove_and_add_spares(mddev_t *mddev) } if (mddev->degraded) { - rdev_for_each(rdev, rtmp, mddev) + rdev_for_each(rdev, rtmp, mddev) { + if (rdev->raid_disk >= 0 && + !test_bit(In_sync, &rdev->flags)) + spares++; if (rdev->raid_disk < 0 && !test_bit(Faulty, &rdev->flags)) { rdev->recovery_offset = 0; @@ -5856,6 +5857,7 @@ static int remove_and_add_spares(mddev_t *mddev) } else break; } + } } return spares; } @@ -5869,7 +5871,7 @@ static int remove_and_add_spares(mddev_t *mddev) * to do that as needed. * When it is determined that resync is needed, we set MD_RECOVERY_RUNNING in * "->recovery" and create a thread at ->sync_thread. - * When the thread finishes it sets MD_RECOVERY_DONE (and might set MD_RECOVERY_ERR) + * When the thread finishes it sets MD_RECOVERY_DONE * and wakeups up this thread which will reap the thread and finish up. * This thread also removes any faulty devices (with nr_pending == 0). * @@ -5944,8 +5946,7 @@ void md_check_recovery(mddev_t *mddev) /* resync has finished, collect result */ md_unregister_thread(mddev->sync_thread); mddev->sync_thread = NULL; - if (!test_bit(MD_RECOVERY_ERR, &mddev->recovery) && - !test_bit(MD_RECOVERY_INTR, &mddev->recovery)) { + if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery)) { /* success...*/ /* activate any spares */ mddev->pers->spare_active(mddev); @@ -5969,7 +5970,6 @@ void md_check_recovery(mddev_t *mddev) * might be left set */ clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery); - clear_bit(MD_RECOVERY_ERR, &mddev->recovery); clear_bit(MD_RECOVERY_INTR, &mddev->recovery); clear_bit(MD_RECOVERY_DONE, &mddev->recovery); diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c index 4f4d1f38384..e968116e0de 100644 --- a/drivers/md/multipath.c +++ b/drivers/md/multipath.c @@ -327,7 +327,8 @@ static int multipath_remove_disk(mddev_t *mddev, int number) if (rdev) { if (test_bit(In_sync, &rdev->flags) || atomic_read(&rdev->nr_pending)) { - printk(KERN_ERR "hot-remove-disk, slot %d is identified" " but is still operational!\n", number); + printk(KERN_ERR "hot-remove-disk, slot %d is identified" + " but is still operational!\n", number); err = -EBUSY; goto abort; } diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index d0f4021bbc2..c610b947218 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1027,7 +1027,7 @@ static void error(mddev_t *mddev, mdk_rdev_t *rdev) /* * if recovery is running, make sure it aborts. */ - set_bit(MD_RECOVERY_ERR, &mddev->recovery); + set_bit(MD_RECOVERY_INTR, &mddev->recovery); } else set_bit(Faulty, &rdev->flags); set_bit(MD_CHANGE_DEVS, &mddev->flags); @@ -1148,6 +1148,14 @@ static int raid1_remove_disk(mddev_t *mddev, int number) err = -EBUSY; goto abort; } + /* Only remove non-faulty devices is recovery + * is not possible. + */ + if (!test_bit(Faulty, &rdev->flags) && + mddev->degraded < conf->raid_disks) { + err = -EBUSY; + goto abort; + } p->rdev = NULL; synchronize_rcu(); if (atomic_read(&rdev->nr_pending)) { diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 8536ede1e71..1de17da34a9 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1020,7 +1020,7 @@ static void error(mddev_t *mddev, mdk_rdev_t *rdev) /* * if recovery is running, make sure it aborts. */ - set_bit(MD_RECOVERY_ERR, &mddev->recovery); + set_bit(MD_RECOVERY_INTR, &mddev->recovery); } set_bit(Faulty, &rdev->flags); set_bit(MD_CHANGE_DEVS, &mddev->flags); @@ -1171,6 +1171,14 @@ static int raid10_remove_disk(mddev_t *mddev, int number) err = -EBUSY; goto abort; } + /* Only remove faulty devices in recovery + * is not possible. + */ + if (!test_bit(Faulty, &rdev->flags) && + enough(conf)) { + err = -EBUSY; + goto abort; + } p->rdev = NULL; synchronize_rcu(); if (atomic_read(&rdev->nr_pending)) { @@ -1237,6 +1245,7 @@ static void end_sync_write(struct bio *bio, int error) if (!uptodate) md_error(mddev, conf->mirrors[d].rdev); + update_head_pos(i, r10_bio); while (atomic_dec_and_test(&r10_bio->remaining)) { @@ -1844,7 +1853,8 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i if (rb2) atomic_dec(&rb2->remaining); r10_bio = rb2; - if (!test_and_set_bit(MD_RECOVERY_ERR, &mddev->recovery)) + if (!test_and_set_bit(MD_RECOVERY_INTR, + &mddev->recovery)) printk(KERN_INFO "raid10: %s: insufficient working devices for recovery.\n", mdname(mddev)); break; diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 2f28745dacf..425958a76b8 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -1268,7 +1268,7 @@ static void error(mddev_t *mddev, mdk_rdev_t *rdev) /* * if recovery was running, make sure it aborts. */ - set_bit(MD_RECOVERY_ERR, &mddev->recovery); + set_bit(MD_RECOVERY_INTR, &mddev->recovery); } set_bit(Faulty, &rdev->flags); printk (KERN_ALERT @@ -4574,6 +4574,14 @@ static int raid5_remove_disk(mddev_t *mddev, int number) err = -EBUSY; goto abort; } + /* Only remove non-faulty devices if recovery + * isn't possible. + */ + if (!test_bit(Faulty, &rdev->flags) && + mddev->degraded <= conf->max_degraded) { + err = -EBUSY; + goto abort; + } p->rdev = NULL; synchronize_rcu(); if (atomic_read(&rdev->nr_pending)) { -- cgit v1.2.3 From 69292b342193d4068f6435660368ff98713d8164 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Fri, 23 May 2008 13:04:42 -0700 Subject: gpio: pca953x driver handles pca9554 too Teach drivers/gpio/pca953x.c about PCA9554, another compatible chip. Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/gpio/pca953x.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c index 93f916720b1..7e40e8a55ed 100644 --- a/drivers/gpio/pca953x.c +++ b/drivers/gpio/pca953x.c @@ -30,6 +30,7 @@ static const struct i2c_device_id pca953x_id[] = { { "pca9537", 4, }, { "pca9538", 8, }, { "pca9539", 16, }, + { "pca9554", 8, }, { "pca9555", 16, }, { "pca9557", 8, }, /* REVISIT several pca955x parts should work here too */ -- cgit v1.2.3 From 1d1c1d9b557a12320174058d2d313ffb0f8611f4 Mon Sep 17 00:00:00 2001 From: Roel Kluin <12o3l@tiscali.nl> Date: Fri, 23 May 2008 13:04:43 -0700 Subject: gpio: mcp23s08 debug fix The return value of mcp23s08_read_regs() can only be evaluated when signed Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/gpio/mcp23s08.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpio/mcp23s08.c b/drivers/gpio/mcp23s08.c index 7fb5b9d009d..7f92fdd5f0e 100644 --- a/drivers/gpio/mcp23s08.c +++ b/drivers/gpio/mcp23s08.c @@ -168,7 +168,7 @@ static void mcp23s08_dbg_show(struct seq_file *s, struct gpio_chip *chip) { struct mcp23s08 *mcp; char bank; - unsigned t; + int t; unsigned mask; mcp = container_of(chip, struct mcp23s08, chip); -- cgit v1.2.3 From bff5fda972dc23bd1806a47c2098ae173585d013 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Fri, 23 May 2008 13:04:44 -0700 Subject: gpiolib: fix off by one errors The last gpio belonging to a chip is chip->base + chip->ngpios - 1. Some places in the code, but not all, forgot the critical minus one. Signed-off-by: Trent Piepho Acked-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/gpio/gpiolib.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 7f138c6195f..beaf6b3a37d 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -127,7 +127,7 @@ int __init gpiochip_reserve(int start, int ngpio) unsigned long flags; int i; - if (!gpio_is_valid(start) || !gpio_is_valid(start + ngpio)) + if (!gpio_is_valid(start) || !gpio_is_valid(start + ngpio - 1)) return -EINVAL; spin_lock_irqsave(&gpio_lock, flags); @@ -170,7 +170,7 @@ int gpiochip_add(struct gpio_chip *chip) unsigned id; int base = chip->base; - if ((!gpio_is_valid(base) || !gpio_is_valid(base + chip->ngpio)) + if ((!gpio_is_valid(base) || !gpio_is_valid(base + chip->ngpio - 1)) && base >= 0) { status = -EINVAL; goto fail; @@ -207,7 +207,7 @@ fail: /* failures here can mean systems won't boot... */ if (status) pr_err("gpiochip_add: gpios %d..%d (%s) not registered\n", - chip->base, chip->base + chip->ngpio, + chip->base, chip->base + chip->ngpio - 1, chip->label ? : "generic"); return status; } -- cgit v1.2.3 From 6089093e588ee3f6aed99d08b1cf5ea37c52cf97 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 23 May 2008 13:04:45 -0700 Subject: ip2: fix crashes on load/unload This doesn't need to be two modules, and making it one cleans up the problem Signed-off-by: Alan Cox Cc: Jiri Slaby Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/ip2/Makefile | 4 ++-- drivers/char/ip2/ip2main.c | 23 ----------------------- 2 files changed, 2 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/char/ip2/Makefile b/drivers/char/ip2/Makefile index 6bfe2543ddc..939618f62fe 100644 --- a/drivers/char/ip2/Makefile +++ b/drivers/char/ip2/Makefile @@ -2,7 +2,7 @@ # Makefile for the Computone IntelliPort Plus Driver # -obj-$(CONFIG_COMPUTONE) += ip2.o ip2main.o +obj-$(CONFIG_COMPUTONE) += ip2.o -ip2-objs := ip2base.o +ip2-objs := ip2base.o ip2main.o diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c index 70957acaa96..c12cf8fc4be 100644 --- a/drivers/char/ip2/ip2main.c +++ b/drivers/char/ip2/ip2main.c @@ -345,27 +345,6 @@ have_requested_irq( char irq ) return 0; } -/******************************************************************************/ -/* Function: init_module() */ -/* Parameters: None */ -/* Returns: Success (0) */ -/* */ -/* Description: */ -/* This is a required entry point for an installable module. It simply calls */ -/* the driver initialisation function and returns what it returns. */ -/******************************************************************************/ -#ifdef MODULE -static int __init -ip2_init_module(void) -{ -#ifdef IP2DEBUG_INIT - printk (KERN_DEBUG "Loading module ...\n" ); -#endif - return 0; -} -module_init(ip2_init_module); -#endif /* MODULE */ - /******************************************************************************/ /* Function: cleanup_module() */ /* Parameters: None */ @@ -779,8 +758,6 @@ out: return err; } -EXPORT_SYMBOL(ip2_loadmain); - /******************************************************************************/ /* Function: ip2_init_board() */ /* Parameters: Index of board in configuration structure */ -- cgit v1.2.3 From 53978d0a7a27eb036b9bf33c4caa06257a9dbed7 Mon Sep 17 00:00:00 2001 From: Marcin Krol Date: Fri, 23 May 2008 13:04:46 -0700 Subject: brd: don't show ramdisks in /proc/partitions In 2.6.25, ramdisk devices show up in /proc/partitions, which is a behaviour change from the old rd.c. Add GENHD_FL_SUPPRESS_PARTITION_INFO, which was present in rd.c. All kernels prior to 2.6.25 weren't displaying ramdisks in /proc/partitions. Since there are many userspace tools using information from /proc/partitions some of them may now behave incorrectly (I didn't tested any though). For example before 2.6.25 /proc/partitions was empty if no block devices like hard disks and such were detected by kernel. Now all 16 ramdisks are always visible there. Some software may rely on such information (I mean, on empty /proc/partitions). There was quite similar situation back in 2004, and ramdisks were excluded back from displaying. Thats why I called this a regression (maybe a bit unfortunate). See this patch for info: http://kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.3-rc2/2.6.3-rc2-mm1/broken-out/nbd-proc-partitions-fix.patch I also think that someone somewhere (long time ago) excluded ramdisks from /proc/partitions for good reasons. It is possible that now such new "feature" is harmless, but I think there are more chances that someone will say "hey, /proc/partitions has changed, now my software doesn't work" then "hey where did my new 2.6.25 feature go". nbd devices are also excluded, maybe for very same (unknown to me) reasons. Signed-off-by: Marcin Krol Signed-off-by: Nick Piggin Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/block/brd.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/block/brd.c b/drivers/block/brd.c index a196ef7f147..680cdfc00b9 100644 --- a/drivers/block/brd.c +++ b/drivers/block/brd.c @@ -447,6 +447,7 @@ static struct brd_device *brd_alloc(int i) disk->fops = &brd_fops; disk->private_data = brd; disk->queue = brd->brd_queue; + disk->flags |= GENHD_FL_SUPPRESS_PARTITION_INFO; sprintf(disk->disk_name, "ram%d", i); set_capacity(disk, rd_size * 2); -- cgit v1.2.3 From 03a74dcc7eebe6edd778317e82fafdf71e68488c Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Fri, 23 May 2008 13:04:49 -0700 Subject: serial: fix enable_irq_wake/disable_irq_wake imbalance in serial_core.c enable_irq_wake() and disable_irq_wake() need to be balanced. However, serial_core.c calls these for different conditions during the suspend and resume functions... This is causing a regular WARN_ON() as found at http://www.kerneloops.org/search.php?search=set_irq_wake This patch makes the conditions for triggering the _wake enable/disable sequence identical. Signed-off-by: Arjan van de Ven Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/serial_core.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index eab03273379..53b03c629af 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -2054,6 +2054,8 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *port) int uart_resume_port(struct uart_driver *drv, struct uart_port *port) { struct uart_state *state = drv->state + port->line; + struct device *tty_dev; + struct uart_match match = {port, drv}; mutex_lock(&state->mutex); @@ -2063,7 +2065,8 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *port) return 0; } - if (!port->suspended) { + tty_dev = device_find_child(port->dev, &match, serial_match_port); + if (!port->suspended && device_may_wakeup(tty_dev)) { disable_irq_wake(port->irq); mutex_unlock(&state->mutex); return 0; -- cgit v1.2.3 From cdc83ae2453ddb19060e05e6afd22b1254128c42 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 23 May 2008 13:04:53 -0700 Subject: SM501: reverse FPEN/VBIASEN flags behaviour To keep backwards compatibility, reverse the meanings of these flags so that when they are not set, the driver uses the original behvaiour. Signed-off-by: Ben Dooks Cc: Arnaud Patard Acked-by: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/sm501fb.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c index 742b5c656d6..15d4a768b1f 100644 --- a/drivers/video/sm501fb.c +++ b/drivers/video/sm501fb.c @@ -663,14 +663,14 @@ static void sm501fb_panel_power(struct sm501fb_info *fbi, int to) sm501fb_sync_regs(fbi); mdelay(10); - if (pd->flags & SM501FB_FLAG_PANEL_USE_VBIASEN) { + if (!(pd->flags & SM501FB_FLAG_PANEL_NO_VBIASEN)) { control |= SM501_DC_PANEL_CONTROL_BIAS; /* VBIASEN */ writel(control, ctrl_reg); sm501fb_sync_regs(fbi); mdelay(10); } - if (pd->flags & SM501FB_FLAG_PANEL_USE_FPEN) { + if (!(pd->flags & SM501FB_FLAG_PANEL_NO_FPEN)) { control |= SM501_DC_PANEL_CONTROL_FPEN; writel(control, ctrl_reg); sm501fb_sync_regs(fbi); @@ -678,14 +678,14 @@ static void sm501fb_panel_power(struct sm501fb_info *fbi, int to) } } else if (!to && (control & SM501_DC_PANEL_CONTROL_VDD) != 0) { /* disable panel power */ - if (pd->flags & SM501FB_FLAG_PANEL_USE_FPEN) { + if (!(pd->flags & SM501FB_FLAG_PANEL_NO_FPEN)) { control &= ~SM501_DC_PANEL_CONTROL_FPEN; writel(control, ctrl_reg); sm501fb_sync_regs(fbi); mdelay(10); } - if (pd->flags & SM501FB_FLAG_PANEL_USE_VBIASEN) { + if (!(pd->flags & SM501FB_FLAG_PANEL_NO_VBIASEN)) { control &= ~SM501_DC_PANEL_CONTROL_BIAS; writel(control, ctrl_reg); sm501fb_sync_regs(fbi); -- cgit v1.2.3 From 673b4600e3b3cc6689025e6a6fc6909b6e53dd5e Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 23 May 2008 13:04:55 -0700 Subject: S3C2410: ensure that FB_BLANK_POWERDOWN shuts down the controller When a blank level of FB_BLANK_POWERDOWN is used, we should shut down the controller so that it no longer tries to produce any panel signals or data, and shuts down the DMA which is not needed. Signed-off-by: Ben Dooks Cc: Arnaud Patard Acked-by: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/s3c2410fb.c | 49 ++++++++++++++++++++++++++++------------------- 1 file changed, 29 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c index 13b38cbbe4c..2219ae56a0e 100644 --- a/drivers/video/s3c2410fb.c +++ b/drivers/video/s3c2410fb.c @@ -580,6 +580,27 @@ static int s3c2410fb_setcolreg(unsigned regno, return 0; } +/* s3c2410fb_lcd_enable + * + * shutdown the lcd controller + */ +static void s3c2410fb_lcd_enable(struct s3c2410fb_info *fbi, int enable) +{ + unsigned long flags; + + local_irq_save(flags); + + if (enable) + fbi->regs.lcdcon1 |= S3C2410_LCDCON1_ENVID; + else + fbi->regs.lcdcon1 &= ~S3C2410_LCDCON1_ENVID; + + writel(fbi->regs.lcdcon1, fbi->io + S3C2410_LCDCON1); + + local_irq_restore(flags); +} + + /* * s3c2410fb_blank * @blank_mode: the blank mode we want. @@ -589,9 +610,6 @@ static int s3c2410fb_setcolreg(unsigned regno, * blanking succeeded, != 0 if un-/blanking failed due to e.g. a * video mode which doesn't support it. Implements VESA suspend * and powerdown modes on hardware that supports disabling hsync/vsync: - * blank_mode == 2: suspend vsync - * blank_mode == 3: suspend hsync - * blank_mode == 4: powerdown * * Returns negative errno on error, or zero on success. * @@ -605,6 +623,12 @@ static int s3c2410fb_blank(int blank_mode, struct fb_info *info) tpal_reg += is_s3c2412(fbi) ? S3C2412_TPAL : S3C2410_TPAL; + if (blank_mode == FB_BLANK_POWERDOWN) { + s3c2410fb_lcd_enable(fbi, 0); + } else { + s3c2410fb_lcd_enable(fbi, 1); + } + if (blank_mode == FB_BLANK_UNBLANK) writel(0x0, tpal_reg); else { @@ -983,21 +1007,6 @@ static int __init s3c2412fb_probe(struct platform_device *pdev) return s3c24xxfb_probe(pdev, DRV_S3C2412); } -/* s3c2410fb_stop_lcd - * - * shutdown the lcd controller - */ -static void s3c2410fb_stop_lcd(struct s3c2410fb_info *fbi) -{ - unsigned long flags; - - local_irq_save(flags); - - fbi->regs.lcdcon1 &= ~S3C2410_LCDCON1_ENVID; - writel(fbi->regs.lcdcon1, fbi->io + S3C2410_LCDCON1); - - local_irq_restore(flags); -} /* * Cleanup @@ -1010,7 +1019,7 @@ static int s3c2410fb_remove(struct platform_device *pdev) unregister_framebuffer(fbinfo); - s3c2410fb_stop_lcd(info); + s3c2410fb_lcd_enable(info, 0); msleep(1); s3c2410fb_unmap_video_memory(fbinfo); @@ -1043,7 +1052,7 @@ static int s3c2410fb_suspend(struct platform_device *dev, pm_message_t state) struct fb_info *fbinfo = platform_get_drvdata(dev); struct s3c2410fb_info *info = fbinfo->par; - s3c2410fb_stop_lcd(info); + s3c2410fb_lcd_enable(info, 0); /* sleep before disabling the clock, we need to ensure * the LCD DMA engine is not going to get back on the bus -- cgit v1.2.3 From d585dfe840c93ea800afc124333b6ac04722d359 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 23 May 2008 13:04:56 -0700 Subject: S3C2410: add error print if we cannot add attribute Fix the following warning by checking the result of device_create_file and printing an error but not removing the device (loss of debug registers is not fatal). drivers/video/s3c2410fb.c:905: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result Signed-off-by: Ben Dooks Cc: Arnaud Patard Acked-by: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/s3c2410fb.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c index 2219ae56a0e..5fea847acd1 100644 --- a/drivers/video/s3c2410fb.c +++ b/drivers/video/s3c2410fb.c @@ -972,7 +972,10 @@ static int __init s3c24xxfb_probe(struct platform_device *pdev, } /* create device files */ - device_create_file(&pdev->dev, &dev_attr_debug); + ret = device_create_file(&pdev->dev, &dev_attr_debug); + if (ret) { + printk(KERN_ERR "failed to add debug attribute\n"); + } printk(KERN_INFO "fb%d: %s frame buffer device\n", fbinfo->node, fbinfo->fix.id); -- cgit v1.2.3 From 6a0e4ec7bcc6e80d2a32a4c0b83a32c904aadc05 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 23 May 2008 13:04:56 -0700 Subject: S3C2410: clean out changelog header and tidy Remove the old changelog entries which are now out of date and should be extractable from git anyway. Also tidy up the copyright for the driver. Signed-off-by: Ben Dooks Cc: Arnaud Patard Acked-by: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/s3c2410fb.c | 74 +++++------------------------------------------ drivers/video/s3c2410fb.h | 20 +++---------- 2 files changed, 11 insertions(+), 83 deletions(-) (limited to 'drivers') diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c index 5fea847acd1..24d5ea5b9dd 100644 --- a/drivers/video/s3c2410fb.c +++ b/drivers/video/s3c2410fb.c @@ -1,75 +1,15 @@ -/* - * linux/drivers/video/s3c2410fb.c - * Copyright (c) Arnaud Patard, Ben Dooks +/* linux/drivers/video/s3c2410fb.c + * Copyright (c) 2004,2005 Arnaud Patard + * Copyright (c) 2004-2008 Ben Dooks + * + * S3C2410 LCD Framebuffer Driver * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive for * more details. * - * S3C2410 LCD Controller Frame Buffer Driver - * based on skeletonfb.c, sa1100fb.c and others - * - * ChangeLog - * 2005-04-07: Arnaud Patard - * - u32 state -> pm_message_t state - * - S3C2410_{VA,SZ}_LCD -> S3C24XX - * - * 2005-03-15: Arnaud Patard - * - Removed the ioctl - * - use readl/writel instead of __raw_writel/__raw_readl - * - * 2004-12-04: Arnaud Patard - * - Added the possibility to set on or off the - * debugging messages - * - Replaced 0 and 1 by on or off when reading the - * /sys files - * - * 2005-03-23: Ben Dooks - * - added non 16bpp modes - * - updated platform information for range of x/y/bpp - * - add code to ensure palette is written correctly - * - add pixel clock divisor control - * - * 2004-11-11: Arnaud Patard - * - Removed the use of currcon as it no more exists - * - Added LCD power sysfs interface - * - * 2004-11-03: Ben Dooks - * - minor cleanups - * - add suspend/resume support - * - s3c2410fb_setcolreg() not valid in >8bpp modes - * - removed last CONFIG_FB_S3C2410_FIXED - * - ensure lcd controller stopped before cleanup - * - added sysfs interface for backlight power - * - added mask for gpio configuration - * - ensured IRQs disabled during GPIO configuration - * - disable TPAL before enabling video - * - * 2004-09-20: Arnaud Patard - * - Suppress command line options - * - * 2004-09-15: Arnaud Patard - * - code cleanup - * - * 2004-09-07: Arnaud Patard - * - Renamed from h1940fb.c to s3c2410fb.c - * - Add support for different devices - * - Backlight support - * - * 2004-09-05: Herbert Pötzl - * - added clock (de-)allocation code - * - added fixem fbmem option - * - * 2004-07-27: Arnaud Patard - * - code cleanup - * - added a forgotten return in h1940fb_init - * - * 2004-07-19: Herbert Pötzl - * - code cleanup and extended debugging - * - * 2004-07-15: Arnaud Patard - * - First version - */ + * Driver based on skeletonfb.c, sa1100fb.c and others. +*/ #include #include diff --git a/drivers/video/s3c2410fb.h b/drivers/video/s3c2410fb.h index dbb73b95e2e..9a6ba3e9d1b 100644 --- a/drivers/video/s3c2410fb.h +++ b/drivers/video/s3c2410fb.h @@ -1,26 +1,14 @@ /* * linux/drivers/video/s3c2410fb.h - * Copyright (c) Arnaud Patard + * Copyright (c) 2004 Arnaud Patard + * + * S3C2410 LCD Framebuffer Driver * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive for * more details. * - * S3C2410 LCD Controller Frame Buffer Driver - * based on skeletonfb.c, sa1100fb.h - * - * ChangeLog - * - * 2004-12-04: Arnaud Patard - * - Moved dprintk to s3c2410fb.c - * - * 2004-09-07: Arnaud Patard - * - Renamed from h1940fb.h to s3c2410fb.h - * - Changed h1940 to s3c2410 - * - * 2004-07-15: Arnaud Patard - * - First version - */ +*/ #ifndef __S3C2410FB_H #define __S3C2410FB_H -- cgit v1.2.3 From ee29420aca6ca6fbb3e72ee8a980b2600911b864 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 23 May 2008 13:04:57 -0700 Subject: S3C2410: fix driver MODULE_ALIAS() Add a correct MODULE_ALIAS() entry for this driver to enable udev module loading. Signed-off-by: Ben Dooks Cc: Arnaud Patard Acked-by: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/s3c2410fb.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c index 24d5ea5b9dd..f0598961c6b 100644 --- a/drivers/video/s3c2410fb.c +++ b/drivers/video/s3c2410fb.c @@ -1070,3 +1070,5 @@ MODULE_AUTHOR("Arnaud Patard , " "Ben Dooks "); MODULE_DESCRIPTION("Framebuffer driver for the s3c2410"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:s3c2410-lcd"); +MODULE_ALIAS("platform:s3c2412-lcd"); -- cgit v1.2.3 From f99c90094bffbe1cf38ef66f198a808c14a02d56 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 23 May 2008 13:04:58 -0700 Subject: edac: mpc85xx: fix building as a module including of causes build problems since it doesn't exist. Also removed warning: drivers/edac/mpc85xx_edac.c:45: warning: 'mpc85xx_ctl_name' defined but not used Signed-off-by: Kumar Gala Acked-by: Doug Thompson Acked-by: Dave Jiang Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/edac/mpc85xx_edac.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c index 065732ddf40..d49361bfe67 100644 --- a/drivers/edac/mpc85xx_edac.c +++ b/drivers/edac/mpc85xx_edac.c @@ -20,7 +20,6 @@ #include #include -#include #include "edac_module.h" #include "edac_core.h" #include "mpc85xx_edac.h" @@ -43,8 +42,6 @@ static u32 orig_pci_err_en; static u32 orig_l2_err_disable; static u32 orig_hid1; -static const char *mpc85xx_ctl_name = "MPC85xx"; - /************************ MC SYSFS parts ***********************************/ static ssize_t mpc85xx_mc_inject_data_hi_show(struct mem_ctl_info *mci, -- cgit v1.2.3 From 25d5cb4b0375e5864ec0ccf35e12ff1d1b5cf3f0 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Fri, 23 May 2008 13:05:03 -0700 Subject: spi: remove some spidev oops-on-rmmod paths Somehow the spidev code forgot to include a critical mechanism: when the underlying device is removed (e.g. spi_master rmmod), open file descriptors must be prevented from issuing new I/O requests to that device. On penalty of the oopsing reported by Sebastian Siewior ... This is a partial fix, adding handshaking between the lower level (SPI messaging) and the file operations using the spi_dev. (It also fixes an issue where reads and writes didn't return the number of bytes sent or received.) There's still a refcounting issue to be addressed (separately). Signed-off-by: David Brownell Reported-by: Sebastian Siewior Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/spidev.c | 102 ++++++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 89 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index b3518ca9f04..41620c0fb04 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -68,6 +68,7 @@ static unsigned long minors[N_SPI_MINORS / BITS_PER_LONG]; struct spidev_data { struct device dev; + spinlock_t spi_lock; struct spi_device *spi; struct list_head device_entry; @@ -85,12 +86,75 @@ MODULE_PARM_DESC(bufsiz, "data bytes in biggest supported SPI message"); /*-------------------------------------------------------------------------*/ +/* + * We can't use the standard synchronous wrappers for file I/O; we + * need to protect against async removal of the underlying spi_device. + */ +static void spidev_complete(void *arg) +{ + complete(arg); +} + +static ssize_t +spidev_sync(struct spidev_data *spidev, struct spi_message *message) +{ + DECLARE_COMPLETION_ONSTACK(done); + int status; + + message->complete = spidev_complete; + message->context = &done; + + spin_lock_irq(&spidev->spi_lock); + if (spidev->spi == NULL) + status = -ESHUTDOWN; + else + status = spi_async(spidev->spi, message); + spin_unlock_irq(&spidev->spi_lock); + + if (status == 0) { + wait_for_completion(&done); + status = message->status; + if (status == 0) + status = message->actual_length; + } + return status; +} + +static inline ssize_t +spidev_sync_write(struct spidev_data *spidev, size_t len) +{ + struct spi_transfer t = { + .tx_buf = spidev->buffer, + .len = len, + }; + struct spi_message m; + + spi_message_init(&m); + spi_message_add_tail(&t, &m); + return spidev_sync(spidev, &m); +} + +static inline ssize_t +spidev_sync_read(struct spidev_data *spidev, size_t len) +{ + struct spi_transfer t = { + .rx_buf = spidev->buffer, + .len = len, + }; + struct spi_message m; + + spi_message_init(&m); + spi_message_add_tail(&t, &m); + return spidev_sync(spidev, &m); +} + +/*-------------------------------------------------------------------------*/ + /* Read-only message with current device setup */ static ssize_t spidev_read(struct file *filp, char __user *buf, size_t count, loff_t *f_pos) { struct spidev_data *spidev; - struct spi_device *spi; ssize_t status = 0; /* chipselect only toggles at start or end of operation */ @@ -98,10 +162,9 @@ spidev_read(struct file *filp, char __user *buf, size_t count, loff_t *f_pos) return -EMSGSIZE; spidev = filp->private_data; - spi = spidev->spi; mutex_lock(&spidev->buf_lock); - status = spi_read(spi, spidev->buffer, count); + status = spidev_sync_read(spidev, count); if (status == 0) { unsigned long missing; @@ -122,7 +185,6 @@ spidev_write(struct file *filp, const char __user *buf, size_t count, loff_t *f_pos) { struct spidev_data *spidev; - struct spi_device *spi; ssize_t status = 0; unsigned long missing; @@ -131,12 +193,11 @@ spidev_write(struct file *filp, const char __user *buf, return -EMSGSIZE; spidev = filp->private_data; - spi = spidev->spi; mutex_lock(&spidev->buf_lock); missing = copy_from_user(spidev->buffer, buf, count); if (missing == 0) { - status = spi_write(spi, spidev->buffer, count); + status = spidev_sync_write(spidev, count); if (status == 0) status = count; } else @@ -153,7 +214,6 @@ static int spidev_message(struct spidev_data *spidev, struct spi_transfer *k_xfers; struct spi_transfer *k_tmp; struct spi_ioc_transfer *u_tmp; - struct spi_device *spi = spidev->spi; unsigned n, total; u8 *buf; int status = -EFAULT; @@ -215,7 +275,7 @@ static int spidev_message(struct spidev_data *spidev, spi_message_add_tail(k_tmp, &msg); } - status = spi_sync(spi, &msg); + status = spidev_sync(spidev, &msg); if (status < 0) goto done; @@ -269,8 +329,16 @@ spidev_ioctl(struct inode *inode, struct file *filp, if (err) return -EFAULT; + /* guard against device removal before, or while, + * we issue this ioctl. + */ spidev = filp->private_data; - spi = spidev->spi; + spin_lock_irq(&spidev->spi_lock); + spi = spi_dev_get(spidev->spi); + spin_unlock_irq(&spidev->spi_lock); + + if (spi == NULL) + return -ESHUTDOWN; switch (cmd) { /* read requests */ @@ -356,8 +424,10 @@ spidev_ioctl(struct inode *inode, struct file *filp, default: /* segmented and/or full-duplex I/O request */ if (_IOC_NR(cmd) != _IOC_NR(SPI_IOC_MESSAGE(0)) - || _IOC_DIR(cmd) != _IOC_WRITE) - return -ENOTTY; + || _IOC_DIR(cmd) != _IOC_WRITE) { + retval = -ENOTTY; + break; + } tmp = _IOC_SIZE(cmd); if ((tmp % sizeof(struct spi_ioc_transfer)) != 0) { @@ -385,6 +455,7 @@ spidev_ioctl(struct inode *inode, struct file *filp, kfree(ioc); break; } + spi_dev_put(spi); return retval; } @@ -488,6 +559,7 @@ static int spidev_probe(struct spi_device *spi) /* Initialize the driver data */ spidev->spi = spi; + spin_lock_init(&spidev->spi_lock); mutex_init(&spidev->buf_lock); INIT_LIST_HEAD(&spidev->device_entry); @@ -526,13 +598,17 @@ static int spidev_remove(struct spi_device *spi) { struct spidev_data *spidev = dev_get_drvdata(&spi->dev); - mutex_lock(&device_list_lock); + /* make sure ops on existing fds can abort cleanly */ + spin_lock_irq(&spidev->spi_lock); + spidev->spi = NULL; + spin_unlock_irq(&spidev->spi_lock); + /* prevent new opens */ + mutex_lock(&device_list_lock); list_del(&spidev->device_entry); dev_set_drvdata(&spi->dev, NULL); clear_bit(MINOR(spidev->dev.devt), minors); device_unregister(&spidev->dev); - mutex_unlock(&device_list_lock); return 0; -- cgit v1.2.3 From 03315adca76ee93128e4d92566d1f18a1a937e79 Mon Sep 17 00:00:00 2001 From: Samuel Tardieu Date: Wed, 12 Mar 2008 14:28:01 +0100 Subject: [WATCHDOG] Make w83697h_wdt void-like functions void Some non-exported functions always returned 0. Mark them void instead. Signed-off-by: Samuel Tardieu Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/w83697hf_wdt.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/watchdog/w83697hf_wdt.c b/drivers/watchdog/w83697hf_wdt.c index c622a0e6c9a..b5341741765 100644 --- a/drivers/watchdog/w83697hf_wdt.c +++ b/drivers/watchdog/w83697hf_wdt.c @@ -140,7 +140,7 @@ w83697hf_init(void) w83697hf_deselect_wdt(); } -static int +static void wdt_ping(void) { spin_lock(&io_lock); @@ -150,10 +150,9 @@ wdt_ping(void) w83697hf_deselect_wdt(); spin_unlock(&io_lock); - return 0; } -static int +static void wdt_enable(void) { spin_lock(&io_lock); @@ -164,10 +163,9 @@ wdt_enable(void) w83697hf_deselect_wdt(); spin_unlock(&io_lock); - return 0; } -static int +static void wdt_disable(void) { spin_lock(&io_lock); @@ -178,7 +176,6 @@ wdt_disable(void) w83697hf_deselect_wdt(); spin_unlock(&io_lock); - return 0; } static int -- cgit v1.2.3 From 5794a9f412676ee7ec87828a926d0f58f0a2ffbf Mon Sep 17 00:00:00 2001 From: Samuel Tardieu Date: Wed, 12 Mar 2008 14:28:02 +0100 Subject: [WATCHDOG] Make w83697h_wdt timeout option string similar to others Signed-off-by: Samuel Tardieu Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/w83697hf_wdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/watchdog/w83697hf_wdt.c b/drivers/watchdog/w83697hf_wdt.c index b5341741765..21207021a02 100644 --- a/drivers/watchdog/w83697hf_wdt.c +++ b/drivers/watchdog/w83697hf_wdt.c @@ -56,7 +56,7 @@ MODULE_PARM_DESC(wdt_io, "w83697hf/hg WDT io port (default 0x2e, 0 = autodetect) static int timeout = WATCHDOG_TIMEOUT; /* in seconds */ module_param(timeout, int, 0); -MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) "."); +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255 (default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -- cgit v1.2.3 From 6fd656012bb8d5c5a4570adc2e630668b0109cb0 Mon Sep 17 00:00:00 2001 From: Samuel Tardieu Date: Wed, 12 Mar 2008 14:28:03 +0100 Subject: [WATCHDOG] Add w83697h_wdt early_disable option MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit PĂ¡draig Brady requested the possibility of not disabling the watchdog at module load time or kernel boot time if it had been previously enabled in the bios. It may help rebooting the machine if it freezes before the userland daemon kicks in. Signed-off-by: Samuel Tardieu Cc: PĂ¡draig Brady Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/w83697hf_wdt.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/watchdog/w83697hf_wdt.c b/drivers/watchdog/w83697hf_wdt.c index 21207021a02..528b882420b 100644 --- a/drivers/watchdog/w83697hf_wdt.c +++ b/drivers/watchdog/w83697hf_wdt.c @@ -44,6 +44,7 @@ #define WATCHDOG_NAME "w83697hf/hg WDT" #define PFX WATCHDOG_NAME ": " #define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */ +#define WATCHDOG_EARLY_DISABLE 1 /* Disable until userland kicks in */ static unsigned long wdt_is_open; static char expect_close; @@ -62,6 +63,10 @@ static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +static int early_disable = WATCHDOG_EARLY_DISABLE; +module_param(early_disable, int, 0); +MODULE_PARM_DESC(early_disable, "Watchdog gets disabled at boot time (default=" __MODULE_STRING(WATCHDOG_EARLY_DISABLE) ")"); + /* * Kernel methods. */ @@ -178,6 +183,22 @@ wdt_disable(void) spin_unlock(&io_lock); } +static unsigned char +wdt_running(void) +{ + unsigned char t; + + spin_lock(&io_lock); + w83697hf_select_wdt(); + + t = w83697hf_get_reg(0xF4); /* Read timer */ + + w83697hf_deselect_wdt(); + spin_unlock(&io_lock); + + return t; +} + static int wdt_set_heartbeat(int t) { @@ -394,7 +415,11 @@ wdt_init(void) } w83697hf_init(); - wdt_disable(); /* Disable watchdog until first use */ + if (early_disable) { + if (wdt_running()) + printk (KERN_WARNING PFX "Stopping previously enabled watchdog until userland kicks in\n"); + wdt_disable(); + } if (wdt_set_heartbeat(timeout)) { wdt_set_heartbeat(WATCHDOG_TIMEOUT); -- cgit v1.2.3 From 93539b194696a6291e6895be07d4241c8d972c4b Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 27 Mar 2008 11:53:32 -0700 Subject: [WATCHDOG] Blackfin Watchdog Driver: split platform device/driver - split platform device/driver registering from actual watchdog device/driver registering so that we can cleanly load/unload - fixup __initdata with __initconst and __devinitdata with __devinitconst Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/bfin_wdt.c | 111 ++++++++++++++++++++++++++++---------------- 1 file changed, 71 insertions(+), 40 deletions(-) (limited to 'drivers') diff --git a/drivers/watchdog/bfin_wdt.c b/drivers/watchdog/bfin_wdt.c index 1237113dc14..03b3e3d91e7 100644 --- a/drivers/watchdog/bfin_wdt.c +++ b/drivers/watchdog/bfin_wdt.c @@ -29,7 +29,8 @@ #define stamp(fmt, args...) pr_debug("%s:%i: " fmt "\n", __func__, __LINE__, ## args) #define stampit() stamp("here i am") -#define pr_init(fmt, args...) ({ static const __initdata char __fmt[] = fmt; printk(__fmt, ## args); }) +#define pr_devinit(fmt, args...) ({ static const __devinitconst char __fmt[] = fmt; printk(__fmt, ## args); }) +#define pr_init(fmt, args...) ({ static const __initconst char __fmt[] = fmt; printk(__fmt, ## args); }) #define WATCHDOG_NAME "bfin-wdt" #define PFX WATCHDOG_NAME ": " @@ -377,20 +378,6 @@ static int bfin_wdt_resume(struct platform_device *pdev) # define bfin_wdt_resume NULL #endif -static struct platform_device bfin_wdt_device = { - .name = WATCHDOG_NAME, - .id = -1, -}; - -static struct platform_driver bfin_wdt_driver = { - .driver = { - .name = WATCHDOG_NAME, - .owner = THIS_MODULE, - }, - .suspend = bfin_wdt_suspend, - .resume = bfin_wdt_resume, -}; - static const struct file_operations bfin_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, @@ -418,11 +405,67 @@ static struct notifier_block bfin_wdt_notifier = { }; /** - * bfin_wdt_init - Initialize module + * bfin_wdt_probe - Initialize module * - * Registers the device and notifier handler. Actual device + * Registers the misc device and notifier handler. Actual device * initialization is handled by bfin_wdt_open(). */ +static int __devinit bfin_wdt_probe(struct platform_device *pdev) +{ + int ret; + + ret = register_reboot_notifier(&bfin_wdt_notifier); + if (ret) { + pr_devinit(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", ret); + return ret; + } + + ret = misc_register(&bfin_wdt_miscdev); + if (ret) { + pr_devinit(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); + unregister_reboot_notifier(&bfin_wdt_notifier); + return ret; + } + + pr_devinit(KERN_INFO PFX "initialized: timeout=%d sec (nowayout=%d)\n", + timeout, nowayout); + + return 0; +} + +/** + * bfin_wdt_remove - Initialize module + * + * Unregisters the misc device and notifier handler. Actual device + * deinitialization is handled by bfin_wdt_close(). + */ +static int __devexit bfin_wdt_remove(struct platform_device *pdev) +{ + misc_deregister(&bfin_wdt_miscdev); + unregister_reboot_notifier(&bfin_wdt_notifier); + return 0; +} + +static struct platform_device *bfin_wdt_device; + +static struct platform_driver bfin_wdt_driver = { + .probe = bfin_wdt_probe, + .remove = __devexit_p(bfin_wdt_remove), + .suspend = bfin_wdt_suspend, + .resume = bfin_wdt_resume, + .driver = { + .name = WATCHDOG_NAME, + .owner = THIS_MODULE, + }, +}; + +/** + * bfin_wdt_init - Initialize module + * + * Checks the module params and registers the platform device & driver. + * Real work is in the platform probe function. + */ static int __init bfin_wdt_init(void) { int ret; @@ -436,44 +479,32 @@ static int __init bfin_wdt_init(void) /* Since this is an on-chip device and needs no board-specific * resources, we'll handle all the platform device stuff here. */ - ret = platform_device_register(&bfin_wdt_device); - if (ret) - return ret; - - ret = platform_driver_probe(&bfin_wdt_driver, NULL); - if (ret) - return ret; - - ret = register_reboot_notifier(&bfin_wdt_notifier); + ret = platform_driver_register(&bfin_wdt_driver); if (ret) { - pr_init(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", ret); + pr_init(KERN_ERR PFX "unable to register driver\n"); return ret; } - ret = misc_register(&bfin_wdt_miscdev); - if (ret) { - pr_init(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); - unregister_reboot_notifier(&bfin_wdt_notifier); - return ret; + bfin_wdt_device = platform_device_register_simple(WATCHDOG_NAME, -1, NULL, 0); + if (IS_ERR(bfin_wdt_device)) { + pr_init(KERN_ERR PFX "unable to register device\n"); + platform_driver_unregister(&bfin_wdt_driver); + return PTR_ERR(bfin_wdt_device); } - pr_init(KERN_INFO PFX "initialized: timeout=%d sec (nowayout=%d)\n", - timeout, nowayout); - return 0; } /** * bfin_wdt_exit - Deinitialize module * - * Unregisters the device and notifier handler. Actual device - * deinitialization is handled by bfin_wdt_close(). + * Back out the platform device & driver steps. Real work is in the + * platform remove function. */ static void __exit bfin_wdt_exit(void) { - misc_deregister(&bfin_wdt_miscdev); - unregister_reboot_notifier(&bfin_wdt_notifier); + platform_device_unregister(bfin_wdt_device); + platform_driver_unregister(&bfin_wdt_driver); } module_init(bfin_wdt_init); -- cgit v1.2.3 From 7f7f894c6d3285407b2493d1575500fb25e3d495 Mon Sep 17 00:00:00 2001 From: "Mingarelli, Thomas" Date: Tue, 25 Mar 2008 17:17:30 +0000 Subject: [WATCHDOG] hpwdt: Fix NMI handling. I need to just return in case it's not my NMI so someone else can take a look at it (and reset die_nmi_called to 0 in case I actually do get one that's mine to handle). Signed-off-by: Thomas Mingarelli Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/hpwdt.c | 27 ++++++++++++--------------- 1 file changed, 12 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index 6483d1066b9..6a63535fc04 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -418,23 +418,20 @@ static int hpwdt_pretimeout(struct notifier_block *nb, unsigned long ulReason, static unsigned long rom_pl; static int die_nmi_called; - if (ulReason != DIE_NMI && ulReason != DIE_NMI_IPI) - return NOTIFY_OK; - - spin_lock_irqsave(&rom_lock, rom_pl); - if (!die_nmi_called) - asminline_call(&cmn_regs, cru_rom_addr); - die_nmi_called = 1; - spin_unlock_irqrestore(&rom_lock, rom_pl); - if (cmn_regs.u1.ral == 0) { - printk(KERN_WARNING "hpwdt: An NMI occurred, " - "but unable to determine source.\n"); - } else { - panic("An NMI occurred, please see the Integrated " - "Management Log for details.\n"); + if (ulReason == DIE_NMI || ulReason == DIE_NMI_IPI) { + spin_lock_irqsave(&rom_lock, rom_pl); + if (!die_nmi_called) + asminline_call(&cmn_regs, cru_rom_addr); + die_nmi_called = 1; + spin_unlock_irqrestore(&rom_lock, rom_pl); + if (cmn_regs.u1.ral != 0) { + panic("An NMI occurred, please see the Integrated " + "Management Log for details.\n"); + } } - return NOTIFY_STOP; + die_nmi_called = 0; + return NOTIFY_DONE; } /* -- cgit v1.2.3 From 0b36086b5d7c397a128784bed6e332418e500af1 Mon Sep 17 00:00:00 2001 From: Jordan Crouse Date: Mon, 21 Jan 2008 10:07:00 -0700 Subject: [WATCHDOG] Add a watchdog driver based on the CS5535/CS5536 MFGPT timers Add a watchdog timer based on the MFGPT timers in the CS5535/CS5536 companion chips to the AMD Geode GX and LX processors. Only caveat is that the BIOS must provide at least a one free timer, and most do not. Signed-off-by: Jordan Crouse Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/Kconfig | 13 ++ drivers/watchdog/Makefile | 1 + drivers/watchdog/geodewdt.c | 309 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 323 insertions(+) create mode 100644 drivers/watchdog/geodewdt.c (limited to 'drivers') diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 254d115cafa..ccb78f66c2b 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -295,6 +295,19 @@ config ALIM7101_WDT Most people will say N. +config GEODE_WDT + tristate "AMD Geode CS5535/CS5536 Watchdog" + depends on MGEODE_LX + help + This driver enables a watchdog capability built into the + CS5535/CS5536 companion chips for the AMD Geode GX and LX + processors. This watchdog watches your kernel to make sure + it doesn't freeze, and if it does, it reboots your computer after + a certain amount of time. + + You can compile this driver directly into the kernel, or use + it as a module. The module will be called geodewdt. + config SC520_WDT tristate "AMD Elan SC520 processor Watchdog" depends on X86 diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index f3fb170fe5c..25b352b664d 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -59,6 +59,7 @@ obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o obj-$(CONFIG_ALIM1535_WDT) += alim1535_wdt.o obj-$(CONFIG_ALIM7101_WDT) += alim7101_wdt.o +obj-$(CONFIG_GEODE_WDT) += geodewdt.o obj-$(CONFIG_SC520_WDT) += sc520_wdt.o obj-$(CONFIG_EUROTECH_WDT) += eurotechwdt.o obj-$(CONFIG_IB700_WDT) += ib700wdt.o diff --git a/drivers/watchdog/geodewdt.c b/drivers/watchdog/geodewdt.c new file mode 100644 index 00000000000..f85b19625f9 --- /dev/null +++ b/drivers/watchdog/geodewdt.c @@ -0,0 +1,309 @@ +/* Watchdog timer for the Geode GX/LX with the CS5535/CS5536 companion chip + * + * Copyright (C) 2006-2007, Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define GEODEWDT_HZ 500 +#define GEODEWDT_SCALE 6 +#define GEODEWDT_MAX_SECONDS 131 + +#define WDT_FLAGS_OPEN 1 +#define WDT_FLAGS_ORPHAN 2 + +#define DRV_NAME "geodewdt" +#define WATCHDOG_NAME "Geode GX/LX WDT" +#define WATCHDOG_TIMEOUT 60 + +static int timeout = WATCHDOG_TIMEOUT; +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=131, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) "."); + +static int nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, int, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static struct platform_device *geodewdt_platform_device; +static unsigned long wdt_flags; +static int wdt_timer; +static int safe_close; + +static void geodewdt_ping(void) +{ + /* Stop the counter */ + geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0); + + /* Reset the counter */ + geode_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0); + + /* Enable the counter */ + geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, MFGPT_SETUP_CNTEN); +} + +static void geodewdt_disable(void) +{ + geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0); + geode_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0); +} + +static int geodewdt_set_heartbeat(int val) +{ + if (val < 1 || val > GEODEWDT_MAX_SECONDS) + return -EINVAL; + + geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0); + geode_mfgpt_write(wdt_timer, MFGPT_REG_CMP2, val * GEODEWDT_HZ); + geode_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0); + geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, MFGPT_SETUP_CNTEN); + + timeout = val; + return 0; +} + +static int +geodewdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(WDT_FLAGS_OPEN, &wdt_flags)) + return -EBUSY; + + if (!test_and_clear_bit(WDT_FLAGS_ORPHAN, &wdt_flags)) + __module_get(THIS_MODULE); + + geodewdt_ping(); + return nonseekable_open(inode, file); +} + +static int +geodewdt_release(struct inode *inode, struct file *file) +{ + if (safe_close) { + geodewdt_disable(); + module_put(THIS_MODULE); + } + else { + printk(KERN_CRIT "Unexpected close - watchdog is not stopping.\n"); + geodewdt_ping(); + + set_bit(WDT_FLAGS_ORPHAN, &wdt_flags); + } + + clear_bit(WDT_FLAGS_OPEN, &wdt_flags); + safe_close = 0; + return 0; +} + +static ssize_t +geodewdt_write(struct file *file, const char __user *data, size_t len, + loff_t *ppos) +{ + if(len) { + if (!nowayout) { + size_t i; + safe_close = 0; + + for (i = 0; i != len; i++) { + char c; + + if (get_user(c, data + i)) + return -EFAULT; + + if (c == 'V') + safe_close = 1; + } + } + + geodewdt_ping(); + } + return len; +} + +static int +geodewdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, + unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = argp; + int interval; + + static struct watchdog_info ident = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING + | WDIOF_MAGICCLOSE, + .firmware_version = 1, + .identity = WATCHDOG_NAME, + }; + + switch(cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, + sizeof(ident)) ? -EFAULT : 0; + break; + + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + + case WDIOC_KEEPALIVE: + geodewdt_ping(); + return 0; + + case WDIOC_SETTIMEOUT: + if (get_user(interval, p)) + return -EFAULT; + + if (geodewdt_set_heartbeat(interval)) + return -EINVAL; + +/* Fall through */ + + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); + + case WDIOC_SETOPTIONS: + { + int options, ret = -EINVAL; + + if (get_user(options, p)) + return -EFAULT; + + if (options & WDIOS_DISABLECARD) { + geodewdt_disable(); + ret = 0; + } + + if (options & WDIOS_ENABLECARD) { + geodewdt_ping(); + ret = 0; + } + + return ret; + } + default: + return -ENOTTY; + } + + return 0; +} + +static const struct file_operations geodewdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = geodewdt_write, + .ioctl = geodewdt_ioctl, + .open = geodewdt_open, + .release = geodewdt_release, +}; + +static struct miscdevice geodewdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &geodewdt_fops +}; + +static int __devinit +geodewdt_probe(struct platform_device *dev) +{ + int ret, timer; + + timer = geode_mfgpt_alloc_timer(MFGPT_TIMER_ANY, + MFGPT_DOMAIN_WORKING, THIS_MODULE); + + if (timer == -1) { + printk(KERN_ERR "geodewdt: No timers were available\n"); + return -ENODEV; + } + + wdt_timer = timer; + + /* Set up the timer */ + + geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, + GEODEWDT_SCALE | (3 << 8)); + + /* Set up comparator 2 to reset when the event fires */ + geode_mfgpt_toggle_event(wdt_timer, MFGPT_CMP2, MFGPT_EVENT_RESET, 1); + + /* Set up the initial timeout */ + + geode_mfgpt_write(wdt_timer, MFGPT_REG_CMP2, + timeout * GEODEWDT_HZ); + + ret = misc_register(&geodewdt_miscdev); + + return ret; +} + +static int __devexit +geodewdt_remove(struct platform_device *dev) +{ + misc_deregister(&geodewdt_miscdev); + return 0; +} + +static void +geodewdt_shutdown(struct platform_device *dev) +{ + geodewdt_disable(); +} + +static struct platform_driver geodewdt_driver = { + .probe = geodewdt_probe, + .remove = __devexit_p(geodewdt_remove), + .shutdown = geodewdt_shutdown, + .driver = { + .owner = THIS_MODULE, + .name = DRV_NAME, + }, +}; + +static int __init +geodewdt_init(void) +{ + int ret; + + ret = platform_driver_register(&geodewdt_driver); + if (ret) + return ret; + + geodewdt_platform_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0); + if (IS_ERR(geodewdt_platform_device)) { + ret = PTR_ERR(geodewdt_platform_device); + goto err; + } + + return 0; +err: + platform_driver_unregister(&geodewdt_driver); + return ret; +} + +static void __exit +geodewdt_exit(void) +{ + platform_device_unregister(geodewdt_platform_device); + platform_driver_unregister(&geodewdt_driver); +} + +module_init(geodewdt_init); +module_exit(geodewdt_exit); + +MODULE_AUTHOR("Advanced Micro Devices, Inc"); +MODULE_DESCRIPTION("Geode GX/LX Watchdog Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); -- cgit v1.2.3 From f172ddc61ad7a7c444b2b3e08992a45c76b821f9 Mon Sep 17 00:00:00 2001 From: Chen Gong Date: Tue, 29 Apr 2008 16:42:05 +0800 Subject: [WATCHDOG] Fix booke_wdt.c on MPC85xx SMP system's On Book-E SMP systems each core has its own private watchdog. If only one watchdog is enabled, when the core that doesn't enable the watchdog is hung, system can't reset because no watchdog is running on it. That's bad. It means we must enable watchdogs on both cores. We can use smp_call_function() to send appropriate messages to all the other cores to enable and update the watchdog. Signed-off-by: Chen Gong Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton --- drivers/watchdog/booke_wdt.c | 88 ++++++++++++++++++++------------------------ 1 file changed, 40 insertions(+), 48 deletions(-) (limited to 'drivers') diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c index d362f5bf658..c1ba0db4850 100644 --- a/drivers/watchdog/booke_wdt.c +++ b/drivers/watchdog/booke_wdt.c @@ -1,12 +1,10 @@ /* - * drivers/char/watchdog/booke_wdt.c - * * Watchdog timer for PowerPC Book-E systems * * Author: Matthew McClintock * Maintainer: Kumar Gala * - * Copyright 2005 Freescale Semiconductor Inc. + * Copyright 2005, 2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -16,6 +14,7 @@ #include #include +#include #include #include #include @@ -38,7 +37,7 @@ #define WDT_PERIOD_DEFAULT 3 /* Refer to the PPC40x and PPC4xx manuals */ #endif /* for timing information */ -u32 booke_wdt_enabled = 0; +u32 booke_wdt_enabled; u32 booke_wdt_period = WDT_PERIOD_DEFAULT; #ifdef CONFIG_FSL_BOOKE @@ -47,33 +46,31 @@ u32 booke_wdt_period = WDT_PERIOD_DEFAULT; #define WDTP(x) (TCR_WP(x)) #endif -/* - * booke_wdt_ping: - */ -static __inline__ void booke_wdt_ping(void) +static DEFINE_SPINLOCK(booke_wdt_lock); + +static void __booke_wdt_ping(void *data) { mtspr(SPRN_TSR, TSR_ENW|TSR_WIS); } -/* - * booke_wdt_enable: - */ -static __inline__ void booke_wdt_enable(void) +static void booke_wdt_ping(void) +{ + on_each_cpu(__booke_wdt_ping, NULL, 0, 0); +} + +static void __booke_wdt_enable(void *data) { u32 val; /* clear status before enabling watchdog */ - booke_wdt_ping(); + __booke_wdt_ping(NULL); val = mfspr(SPRN_TCR); val |= (TCR_WIE|TCR_WRC(WRC_CHIP)|WDTP(booke_wdt_period)); mtspr(SPRN_TCR, val); } -/* - * booke_wdt_write: - */ -static ssize_t booke_wdt_write (struct file *file, const char __user *buf, +static ssize_t booke_wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { booke_wdt_ping(); @@ -81,15 +78,11 @@ static ssize_t booke_wdt_write (struct file *file, const char __user *buf, } static struct watchdog_info ident = { - .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, - .firmware_version = 0, - .identity = "PowerPC Book-E Watchdog", + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, + .identity = "PowerPC Book-E Watchdog", }; -/* - * booke_wdt_ioctl: - */ -static int booke_wdt_ioctl (struct inode *inode, struct file *file, +static int booke_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { u32 tmp = 0; @@ -97,7 +90,7 @@ static int booke_wdt_ioctl (struct inode *inode, struct file *file, switch (cmd) { case WDIOC_GETSUPPORT: - if (copy_to_user ((struct watchdog_info __user *) arg, &ident, + if (copy_to_user((struct watchdog_info __user *)arg, &ident, sizeof(struct watchdog_info))) return -EFAULT; case WDIOC_GETSTATUS: @@ -132,33 +125,33 @@ static int booke_wdt_ioctl (struct inode *inode, struct file *file, return 0; } -/* - * booke_wdt_open: - */ -static int booke_wdt_open (struct inode *inode, struct file *file) + +static int booke_wdt_open(struct inode *inode, struct file *file) { + spin_lock(&booke_wdt_lock); if (booke_wdt_enabled == 0) { booke_wdt_enabled = 1; - booke_wdt_enable(); - printk (KERN_INFO "PowerPC Book-E Watchdog Timer Enabled (wdt_period=%d)\n", - booke_wdt_period); + on_each_cpu(__booke_wdt_enable, NULL, 0, 0); + printk(KERN_INFO "PowerPC Book-E Watchdog Timer Enabled " + "(wdt_period=%d)\n", booke_wdt_period); } + spin_unlock(&booke_wdt_lock); return nonseekable_open(inode, file); } static const struct file_operations booke_wdt_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .write = booke_wdt_write, - .ioctl = booke_wdt_ioctl, - .open = booke_wdt_open, + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = booke_wdt_write, + .ioctl = booke_wdt_ioctl, + .open = booke_wdt_open, }; static struct miscdevice booke_wdt_miscdev = { - .minor = WATCHDOG_MINOR, - .name = "watchdog", - .fops = &booke_wdt_fops, + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &booke_wdt_fops, }; static void __exit booke_wdt_exit(void) @@ -166,28 +159,27 @@ static void __exit booke_wdt_exit(void) misc_deregister(&booke_wdt_miscdev); } -/* - * booke_wdt_init: - */ static int __init booke_wdt_init(void) { int ret = 0; - printk (KERN_INFO "PowerPC Book-E Watchdog Timer Loaded\n"); + printk(KERN_INFO "PowerPC Book-E Watchdog Timer Loaded\n"); ident.firmware_version = cur_cpu_spec->pvr_value; ret = misc_register(&booke_wdt_miscdev); if (ret) { - printk (KERN_CRIT "Cannot register miscdev on minor=%d (err=%d)\n", + printk(KERN_CRIT "Cannot register miscdev on minor=%d: %d\n", WATCHDOG_MINOR, ret); return ret; } + spin_lock(&booke_wdt_lock); if (booke_wdt_enabled == 1) { - printk (KERN_INFO "PowerPC Book-E Watchdog Timer Enabled (wdt_period=%d)\n", - booke_wdt_period); - booke_wdt_enable(); + printk(KERN_INFO "PowerPC Book-E Watchdog Timer Enabled " + "(wdt_period=%d)\n", booke_wdt_period); + on_each_cpu(__booke_wdt_enable, NULL, 0, 0); } + spin_unlock(&booke_wdt_lock); return ret; } -- cgit v1.2.3 From a49056da0325742d3b4f5d1ef7bf8ab0690c3888 Mon Sep 17 00:00:00 2001 From: Gabriel C Date: Wed, 30 Apr 2008 16:51:10 +0200 Subject: [WATCHDOG] Add ICH9DO into the iTCO_wdt.c driver Add the Intel ICH9DO controller ID's for the iTCO_wdt kernel driver and bump the driver version. Tested on an P5E-VM DO ASUS motherboard. Signed-off-by: Gabriel Craciunescu Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton --- drivers/watchdog/iTCO_wdt.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c index a0e6809e369..95ba985bd34 100644 --- a/drivers/watchdog/iTCO_wdt.c +++ b/drivers/watchdog/iTCO_wdt.c @@ -41,9 +41,10 @@ * 82801HH (ICH8DH) : document number 313056-003, 313057-009, * 82801HO (ICH8DO) : document number 313056-003, 313057-009, * 82801HEM (ICH8M-E) : document number 313056-003, 313057-009, - * 82801IB (ICH9) : document number 316972-001, 316973-001, - * 82801IR (ICH9R) : document number 316972-001, 316973-001, - * 82801IH (ICH9DH) : document number 316972-001, 316973-001, + * 82801IB (ICH9) : document number 316972-001, 316973-006, + * 82801IR (ICH9R) : document number 316972-001, 316973-006, + * 82801IH (ICH9DH) : document number 316972-001, 316973-006, + * 82801IO (ICH9DO) : document number 316972-001, 316973-006, * 6300ESB (6300ESB) : document number 300641-003, 300884-010, * 631xESB (631xESB) : document number 313082-001, 313075-005, * 632xESB (632xESB) : document number 313082-001, 313075-005 @@ -55,8 +56,8 @@ /* Module and version information */ #define DRV_NAME "iTCO_wdt" -#define DRV_VERSION "1.02" -#define DRV_RELDATE "26-Jul-2007" +#define DRV_VERSION "1.03" +#define DRV_RELDATE "30-Apr-2008" #define PFX DRV_NAME ": " /* Includes */ @@ -104,6 +105,7 @@ enum iTCO_chipsets { TCO_ICH9, /* ICH9 */ TCO_ICH9R, /* ICH9R */ TCO_ICH9DH, /* ICH9DH */ + TCO_ICH9DO, /* ICH9DO */ TCO_631XESB, /* 631xESB/632xESB */ }; @@ -136,6 +138,7 @@ static struct { {"ICH9", 2}, {"ICH9R", 2}, {"ICH9DH", 2}, + {"ICH9DO", 2}, {"631xESB/632xESB", 2}, {NULL,0} }; @@ -181,6 +184,7 @@ static struct pci_device_id iTCO_wdt_pci_tbl[] = { { ITCO_PCI_DEVICE(0x2918, TCO_ICH9 )}, { ITCO_PCI_DEVICE(0x2916, TCO_ICH9R )}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_2, TCO_ICH9DH )}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_4, TCO_ICH9DO )}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ESB2_0, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x2671, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x2672, TCO_631XESB)}, -- cgit v1.2.3 From 7271e60a950b3677f136a31e084bc4b0463c7018 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 26 May 2008 16:08:40 +0200 Subject: tuner: Do not alter i2c_client.name The tuner driver used to change i2c_client.name for its own needs, but it really shouldn't, as this field is used by i2c-core to do the device/driver matching. So, create and use a separate field for the tuner driver needs. Signed-off-by: Michael Krufky Signed-off-by: Jean Delvare --- drivers/media/video/tuner-core.c | 20 +++++++------------- 1 file changed, 7 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index 198f0afb812..a0f7bc1edaa 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -92,6 +92,7 @@ struct tuner { unsigned int type; /* chip type id */ unsigned int config; int (*tuner_callback) (void *dev, int command, int arg); + const char *name; }; /* standard i2c insmod options */ @@ -330,13 +331,13 @@ static void tuner_i2c_address_check(struct tuner *t) tuner_warn("Support for tuners in i2c address range 0x64 thru 0x6f\n"); tuner_warn("will soon be dropped. This message indicates that your\n"); tuner_warn("hardware has a %s tuner at i2c address 0x%02x.\n", - t->i2c->name, t->i2c->addr); + t->name, t->i2c->addr); tuner_warn("To ensure continued support for your device, please\n"); tuner_warn("send a copy of this message, along with full dmesg\n"); tuner_warn("output to v4l-dvb-maintainer@linuxtv.org\n"); tuner_warn("Please use subject line: \"obsolete tuner i2c address.\"\n"); tuner_warn("driver: %s, addr: 0x%02x, type: %d (%s)\n", - t->i2c->adapter->name, t->i2c->addr, t->type, t->i2c->name); + t->i2c->adapter->name, t->i2c->addr, t->type, t->name); tuner_warn("====================== WARNING! ======================\n"); } @@ -470,19 +471,17 @@ static void set_type(struct i2c_client *c, unsigned int type, if ((NULL == analog_ops->set_params) && (fe_tuner_ops->set_analog_params)) { - strlcpy(t->i2c->name, fe_tuner_ops->info.name, - sizeof(t->i2c->name)); + t->name = fe_tuner_ops->info.name; t->fe.analog_demod_priv = t; memcpy(analog_ops, &tuner_core_ops, sizeof(struct analog_demod_ops)); } else { - strlcpy(t->i2c->name, analog_ops->info.name, - sizeof(t->i2c->name)); + t->name = analog_ops->info.name; } - tuner_dbg("type set to %s\n", t->i2c->name); + tuner_dbg("type set to %s\n", t->name); if (t->mode_mask == T_UNINITIALIZED) t->mode_mask = new_mode_mask; @@ -1115,6 +1114,7 @@ static int tuner_probe(struct i2c_client *client, if (NULL == t) return -ENOMEM; t->i2c = client; + t->name = "(tuner unset)"; i2c_set_clientdata(client, t); t->type = UNSET; t->audmode = V4L2_TUNER_MODE_STEREO; @@ -1272,12 +1272,6 @@ static int tuner_remove(struct i2c_client *client) list_del(&t->list); kfree(t); - - /* The probing code has overwritten the device name, restore it so - that reloading the driver will work. Ideally the device name - should not be overwritten in the first place, but for now that - will do. */ - strlcpy(client->name, "tuner", I2C_NAME_SIZE); return 0; } -- cgit v1.2.3 From e8ffef73c8dd2c2d00287829db87cdaf229d3859 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 26 May 2008 15:20:34 -0700 Subject: IB/ipath: Avoid test_bit() on u64 SDMA status value Gabriel C pointed out that when the x86 bitops are updated to operate on unsigned long, the code in sdma_abort_task() will produce warnings: drivers/infiniband/hw/ipath/ipath_sdma.c: In function 'sdma_abort_task': drivers/infiniband/hw/ipath/ipath_sdma.c:267: warning: passing argument 2 of 'constant_test_bit' from incompatible pointer type and so on, because it uses test_bit() to operation on a u64 value (returned by ipath_read_kref64() for a hardware register). Fix up these warnings by converting the test_bit() operations to &ing with appropriate symbolic defines of the bits within the hardware register. This has the benign side-effect of making the code more self-documenting as well. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_kernel.h | 5 +++++ drivers/infiniband/hw/ipath/ipath_sdma.c | 12 ++++-------- 2 files changed, 9 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h index 59a8b254b97..0bd8bcb184a 100644 --- a/drivers/infiniband/hw/ipath/ipath_kernel.h +++ b/drivers/infiniband/hw/ipath/ipath_kernel.h @@ -232,6 +232,11 @@ struct ipath_sdma_desc { #define IPATH_SDMA_TXREQ_S_ABORTED 2 #define IPATH_SDMA_TXREQ_S_SHUTDOWN 3 +#define IPATH_SDMA_STATUS_SCORE_BOARD_DRAIN_IN_PROG (1ull << 63) +#define IPATH_SDMA_STATUS_ABORT_IN_PROG (1ull << 62) +#define IPATH_SDMA_STATUS_INTERNAL_SDMA_ENABLE (1ull << 61) +#define IPATH_SDMA_STATUS_SCB_EMPTY (1ull << 30) + /* max dwords in small buffer packet */ #define IPATH_SMALLBUF_DWORDS (dd->ipath_piosize2k >> 2) diff --git a/drivers/infiniband/hw/ipath/ipath_sdma.c b/drivers/infiniband/hw/ipath/ipath_sdma.c index 0a8c1b8091a..eaba03273e4 100644 --- a/drivers/infiniband/hw/ipath/ipath_sdma.c +++ b/drivers/infiniband/hw/ipath/ipath_sdma.c @@ -263,14 +263,10 @@ static void sdma_abort_task(unsigned long opaque) hwstatus = ipath_read_kreg64(dd, dd->ipath_kregs->kr_senddmastatus); - if (/* ScoreBoardDrainInProg */ - test_bit(63, &hwstatus) || - /* AbortInProg */ - test_bit(62, &hwstatus) || - /* InternalSDmaEnable */ - test_bit(61, &hwstatus) || - /* ScbEmpty */ - !test_bit(30, &hwstatus)) { + if ((hwstatus & (IPATH_SDMA_STATUS_SCORE_BOARD_DRAIN_IN_PROG | + IPATH_SDMA_STATUS_ABORT_IN_PROG | + IPATH_SDMA_STATUS_INTERNAL_SDMA_ENABLE)) || + !(hwstatus & IPATH_SDMA_STATUS_SCB_EMPTY)) { if (dd->ipath_sdma_reset_wait > 0) { /* not done shutting down sdma */ --dd->ipath_sdma_reset_wait; -- cgit v1.2.3 From 03031f71c7e64aada1add057ccc4a8bc6a79924c Mon Sep 17 00:00:00 2001 From: Ralph Campbell Date: Mon, 26 May 2008 15:22:17 -0700 Subject: IB/ipath: Fix device capability flags The driver supports a few features (RNR NAK, port active event, SRQ resize) that were not reported in the device capability flags. This patch fixes that. Signed-off-by: Ralph Campbell Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_verbs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.c b/drivers/infiniband/hw/ipath/ipath_verbs.c index e0ec540042b..7779165b2c2 100644 --- a/drivers/infiniband/hw/ipath/ipath_verbs.c +++ b/drivers/infiniband/hw/ipath/ipath_verbs.c @@ -1494,7 +1494,8 @@ static int ipath_query_device(struct ib_device *ibdev, props->device_cap_flags = IB_DEVICE_BAD_PKEY_CNTR | IB_DEVICE_BAD_QKEY_CNTR | IB_DEVICE_SHUTDOWN_PORT | - IB_DEVICE_SYS_IMAGE_GUID; + IB_DEVICE_SYS_IMAGE_GUID | IB_DEVICE_RC_RNR_NAK_GEN | + IB_DEVICE_PORT_ACTIVE_EVENT | IB_DEVICE_SRQ_RESIZE; props->page_size_cap = PAGE_SIZE; props->vendor_id = dev->dd->ipath_vendorid; props->vendor_part_id = dev->dd->ipath_deviceid; -- cgit v1.2.3 From d35895db7aadc24086b6002101154eec478e9dd6 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bruno=20Pr=C3=A9mont?= Date: Tue, 27 May 2008 01:36:04 -0400 Subject: Input: i8042 - make sure Dritek quirk is invoked at resume MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Also do not fail i8042 entire initialization if enabling dritek extension fails. Signed-off-by: Bruno PrĂ©mont Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042.c | 33 +++++++++++++++++++++++++-------- 1 file changed, 25 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index 65a74cfc187..592ff55b62d 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -885,6 +885,20 @@ static long i8042_panic_blink(long count) #undef DELAY +#ifdef CONFIG_X86 +static void i8042_dritek_enable(void) +{ + char param = 0x90; + int error; + + error = i8042_command(¶m, 0x1059); + if (error) + printk(KERN_WARNING + "Failed to enable DRITEK extension: %d\n", + error); +} +#endif + #ifdef CONFIG_PM /* * Here we try to restore the original BIOS settings. We only want to @@ -942,6 +956,12 @@ static int i8042_resume(struct platform_device *dev) return -EIO; } + +#ifdef CONFIG_X86 + if (i8042_dritek) + i8042_dritek_enable(); +#endif + if (i8042_mux_present) { if (i8042_set_mux_mode(1, NULL) || i8042_enable_mux_ports()) printk(KERN_WARNING @@ -1160,6 +1180,11 @@ static int __devinit i8042_probe(struct platform_device *dev) if (error) return error; +#ifdef CONFIG_X86 + if (i8042_dritek) + i8042_dritek_enable(); +#endif + if (!i8042_noaux) { error = i8042_setup_aux(); if (error && error != -ENODEV && error != -EBUSY) @@ -1171,14 +1196,6 @@ static int __devinit i8042_probe(struct platform_device *dev) if (error) goto out_fail; } -#ifdef CONFIG_X86 - if (i8042_dritek) { - char param = 0x90; - error = i8042_command(¶m, 0x1059); - if (error) - goto out_fail; - } -#endif /* * Ok, everything is ready, let's register all serio ports */ -- cgit v1.2.3 From 6b32ca39d70f5d92f4d450dc54966f20e8b5c1f6 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 27 May 2008 01:36:47 -0400 Subject: Input: wm97xx-core - report a phys for WM97xx touchscreens phys is displayed in diagnostic output like that from evbug so ensure that it is set to something. Signed-off-by: Mark Brown Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/wm97xx-core.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c index e9c7ea46b6e..ba6fb28ef58 100644 --- a/drivers/input/touchscreen/wm97xx-core.c +++ b/drivers/input/touchscreen/wm97xx-core.c @@ -616,6 +616,7 @@ static int wm97xx_probe(struct device *dev) /* set up touch configuration */ wm->input_dev->name = "wm97xx touchscreen"; + wm->input_dev->phys = "wm97xx"; wm->input_dev->open = wm97xx_ts_input_open; wm->input_dev->close = wm97xx_ts_input_close; set_bit(EV_ABS, wm->input_dev->evbit); -- cgit v1.2.3 From ef9db4929a4d9559abf1812fd89cc3b09c56b49b Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 27 May 2008 01:37:08 -0400 Subject: Input: wm97xx-core - fix driver name Fix driver name - thanks to Guennadi Liakhovetski for reporting this. Signed-off-by: Mark Brown Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/wm97xx-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c index ba6fb28ef58..8a00918cfa4 100644 --- a/drivers/input/touchscreen/wm97xx-core.c +++ b/drivers/input/touchscreen/wm97xx-core.c @@ -802,7 +802,7 @@ void wm97xx_unregister_mach_ops(struct wm97xx *wm) EXPORT_SYMBOL_GPL(wm97xx_unregister_mach_ops); static struct device_driver wm97xx_driver = { - .name = "ac97", + .name = "wm97xx-ts", .bus = &ac97_bus_type, .owner = THIS_MODULE, .probe = wm97xx_probe, -- cgit v1.2.3 From 5de4cd431db749bdca58ec88862462729f6159b2 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 27 May 2008 01:37:19 -0400 Subject: Input: wm97xx-core - fix race on PHY init The chip phy_init() function must be called before the dig_enable() function but dig_enable() is called when the device is opened and we only call phy_init() after having reigstered the device, meaning the two can race. Fix this by doing the phy_init() before we register the input device. Thanks to Rodolfo Giometti for the report. Signed-off-by: Mark Brown Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/wm97xx-core.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c index 8a00918cfa4..cdc24ad314e 100644 --- a/drivers/input/touchscreen/wm97xx-core.c +++ b/drivers/input/touchscreen/wm97xx-core.c @@ -608,6 +608,17 @@ static int wm97xx_probe(struct device *dev) goto alloc_err; } + /* set up physical characteristics */ + wm->codec->phy_init(wm); + + /* load gpio cache */ + wm->gpio[0] = wm97xx_reg_read(wm, AC97_GPIO_CFG); + wm->gpio[1] = wm97xx_reg_read(wm, AC97_GPIO_POLARITY); + wm->gpio[2] = wm97xx_reg_read(wm, AC97_GPIO_STICKY); + wm->gpio[3] = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP); + wm->gpio[4] = wm97xx_reg_read(wm, AC97_GPIO_STATUS); + wm->gpio[5] = wm97xx_reg_read(wm, AC97_MISC_AFE); + wm->input_dev = input_allocate_device(); if (wm->input_dev == NULL) { ret = -ENOMEM; @@ -635,17 +646,6 @@ static int wm97xx_probe(struct device *dev) if (ret < 0) goto dev_alloc_err; - /* set up physical characteristics */ - wm->codec->phy_init(wm); - - /* load gpio cache */ - wm->gpio[0] = wm97xx_reg_read(wm, AC97_GPIO_CFG); - wm->gpio[1] = wm97xx_reg_read(wm, AC97_GPIO_POLARITY); - wm->gpio[2] = wm97xx_reg_read(wm, AC97_GPIO_STICKY); - wm->gpio[3] = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP); - wm->gpio[4] = wm97xx_reg_read(wm, AC97_GPIO_STATUS); - wm->gpio[5] = wm97xx_reg_read(wm, AC97_MISC_AFE); - /* register our battery device */ wm->battery_dev = platform_device_alloc("wm97xx-battery", -1); if (!wm->battery_dev) { -- cgit v1.2.3 From 43f83a8f9963a11a9c3f41beecc363da21ae3602 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 27 May 2008 01:37:26 -0400 Subject: Input: wm9713 - support five wire panels Signed-off-by: Mark Brown Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/wm9713.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'drivers') diff --git a/drivers/input/touchscreen/wm9713.c b/drivers/input/touchscreen/wm9713.c index 01278bd7e65..838458792ea 100644 --- a/drivers/input/touchscreen/wm9713.c +++ b/drivers/input/touchscreen/wm9713.c @@ -84,6 +84,15 @@ static int delay = 4; module_param(delay, int, 0); MODULE_PARM_DESC(delay, "Set adc sample delay."); +/* + * Set five_wire = 1 to use a 5 wire touchscreen. + * + * NOTE: Five wire mode does not allow for readback of pressure. + */ +static int five_wire; +module_param(five_wire, int, 0); +MODULE_PARM_DESC(five_wire, "Set to '1' to use 5-wire touchscreen."); + /* * Set adc mask function. * @@ -162,6 +171,19 @@ static void wm9713_phy_init(struct wm97xx *wm) 64000 / rpu); } + /* Five wire panel? */ + if (five_wire) { + dig3 |= WM9713_45W; + dev_info(wm->dev, "setting 5-wire touchscreen mode."); + + if (pil) { + dev_warn(wm->dev, + "Pressure measurement not supported in 5 " + "wire mode, disabling\n"); + pil = 0; + } + } + /* touchpanel pressure */ if (pil == 2) { dig3 |= WM9712_PIL; -- cgit v1.2.3 From 87a54a28970fb6a91de3993120eccc01a0ece732 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Tue, 27 May 2008 01:38:45 -0400 Subject: Input: apanel - remove duplicate include Remove duplicate include file . Signed-off-by: Huang Weiyi Signed-off-by: Dmitry Torokhov --- drivers/input/misc/apanel.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/misc/apanel.c b/drivers/input/misc/apanel.c index 9531d8c7444..d82f7f727f7 100644 --- a/drivers/input/misc/apanel.c +++ b/drivers/input/misc/apanel.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include #include -- cgit v1.2.3 From edb2301f2903e96beadc333f9584222c05858518 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Tue, 27 May 2008 06:31:43 +0100 Subject: ck804rom: fix driver_data in probe table. There's a reason why using C99 initialisers even in the supposedly trivial structs is a good idea. Signed-off-by: Carl-Daniel Hailfinger Signed-off-by: David Woodhouse Signed-off-by: Linus Torvalds --- drivers/mtd/maps/ck804xrom.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/maps/ck804xrom.c b/drivers/mtd/maps/ck804xrom.c index 59d8fb49270..effaf7cdefa 100644 --- a/drivers/mtd/maps/ck804xrom.c +++ b/drivers/mtd/maps/ck804xrom.c @@ -331,15 +331,15 @@ static void __devexit ck804xrom_remove_one (struct pci_dev *pdev) } static struct pci_device_id ck804xrom_pci_tbl[] = { - { PCI_VENDOR_ID_NVIDIA, 0x0051, PCI_ANY_ID, PCI_ANY_ID, DEV_CK804 }, - { PCI_VENDOR_ID_NVIDIA, 0x0360, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 }, - { PCI_VENDOR_ID_NVIDIA, 0x0361, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 }, - { PCI_VENDOR_ID_NVIDIA, 0x0362, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 }, - { PCI_VENDOR_ID_NVIDIA, 0x0363, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 }, - { PCI_VENDOR_ID_NVIDIA, 0x0364, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 }, - { PCI_VENDOR_ID_NVIDIA, 0x0365, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 }, - { PCI_VENDOR_ID_NVIDIA, 0x0366, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 }, - { PCI_VENDOR_ID_NVIDIA, 0x0367, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 }, + { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0051), .driver_data = DEV_CK804 }, + { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0360), .driver_data = DEV_MCP55 }, + { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0361), .driver_data = DEV_MCP55 }, + { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0362), .driver_data = DEV_MCP55 }, + { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0363), .driver_data = DEV_MCP55 }, + { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0364), .driver_data = DEV_MCP55 }, + { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0365), .driver_data = DEV_MCP55 }, + { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0366), .driver_data = DEV_MCP55 }, + { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0367), .driver_data = DEV_MCP55 }, { 0, } }; -- cgit v1.2.3 From 7ba2db5f38955907e46a65c9334d287cd3da32c2 Mon Sep 17 00:00:00 2001 From: Michael Reed Date: Thu, 13 Mar 2008 14:53:56 -0500 Subject: [SCSI] fusion mpt: fix target missing after resetting external raid Following a hard reset of a SAS raid, one of the raid targets is occasionally missing. I tracked this down to a pretty obscure little bug. The LSI fusion drivers for SAS and Fibre Channel both use their respective transport layers. Those transport layers increment the target number assigned to new targets. The routine __scsi_scan_target uses the "this_id" element of the Scsi_Host structure to avoid scanning the scsi host adapter. Both fusion drivers set "this_id" from a value returned in a firmware PortFacts response. For my particular test case (SAS) the firmware id assigned to the initiator was 173. After enough raid resets to cause the raid targets to go and come a sufficient number of times, the id assigned by the transport to a raid target would match the id assigned by the host adapter to the "this_id" field, resulting in that target not being scanned. Fix by not assigning this_id and not checking it in slave_configure. Signed-off-by: Michael Reed Acked-by: "Moore, Eric" Signed-off-by: James Bottomley --- drivers/message/fusion/mptfc.c | 2 -- drivers/message/fusion/mptsas.c | 2 -- drivers/message/fusion/mptscsih.c | 8 -------- 3 files changed, 12 deletions(-) (limited to 'drivers') diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c index 3cdd4e96211..1e24ab4ac38 100644 --- a/drivers/message/fusion/mptfc.c +++ b/drivers/message/fusion/mptfc.c @@ -1238,8 +1238,6 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id) sh->max_id = ioc->pfacts->MaxDevices; sh->max_lun = max_lun; - sh->this_id = ioc->pfacts[0].PortSCSIID; - /* Required entry. */ sh->unique_id = ioc->id; diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c index 468480771f1..4d492ba232b 100644 --- a/drivers/message/fusion/mptsas.c +++ b/drivers/message/fusion/mptsas.c @@ -3193,8 +3193,6 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id) sh->transportt = mptsas_transport_template; - sh->this_id = ioc->pfacts[0].PortSCSIID; - /* Required entry. */ sh->unique_id = ioc->id; diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c index b109bd8a4d1..c68ef00c2f9 100644 --- a/drivers/message/fusion/mptscsih.c +++ b/drivers/message/fusion/mptscsih.c @@ -2451,12 +2451,6 @@ mptscsih_slave_configure(struct scsi_device *sdev) ioc->name, sdev->sdtr, sdev->wdtr, sdev->ppr, sdev->inquiry_len)); - if (sdev->id > sh->max_id) { - /* error case, should never happen */ - scsi_adjust_queue_depth(sdev, 0, 1); - goto slave_configure_exit; - } - vdevice->configured_lun = 1; mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH); @@ -2470,8 +2464,6 @@ mptscsih_slave_configure(struct scsi_device *sdev) ioc->name, vtarget->negoFlags, vtarget->maxOffset, vtarget->minSyncFactor)); -slave_configure_exit: - dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "tagged %d, simple %d, ordered %d\n", ioc->name,sdev->tagged_supported, sdev->simple_tags, -- cgit v1.2.3 From ca61668b82a902143997794aae3f681a602e6ebc Mon Sep 17 00:00:00 2001 From: Brian King Date: Mon, 19 May 2008 10:27:56 -0500 Subject: [SCSI] ibmvscsi: Non SCSI error status fixup Some versions of the Virtual I/O Server on Power return 0x99 in the non-SCSI error status field as success, rather than 0. This fixes the ibmvscsi driver to treat this response as success. Signed-off-by: Brian King Signed-off-by: James Bottomley --- drivers/scsi/ibmvscsi/ibmvscsi.c | 2 +- drivers/scsi/ibmvscsi/viosrp.h | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c index ccfd8aca376..5d23368a1bc 100644 --- a/drivers/scsi/ibmvscsi/ibmvscsi.c +++ b/drivers/scsi/ibmvscsi/ibmvscsi.c @@ -1348,7 +1348,7 @@ void ibmvscsi_handle_crq(struct viosrp_crq *crq, del_timer(&evt_struct->timer); - if (crq->status != VIOSRP_OK && evt_struct->cmnd) + if ((crq->status != VIOSRP_OK && crq->status != VIOSRP_OK2) && evt_struct->cmnd) evt_struct->cmnd->result = DID_ERROR << 16; if (evt_struct->done) evt_struct->done(evt_struct); diff --git a/drivers/scsi/ibmvscsi/viosrp.h b/drivers/scsi/ibmvscsi/viosrp.h index 4c4aadb3e40..204604501ad 100644 --- a/drivers/scsi/ibmvscsi/viosrp.h +++ b/drivers/scsi/ibmvscsi/viosrp.h @@ -65,7 +65,8 @@ enum viosrp_crq_status { VIOSRP_VIOLATES_MAX_XFER = 0x2, VIOSRP_PARTNER_PANIC = 0x3, VIOSRP_DEVICE_BUSY = 0x8, - VIOSRP_ADAPTER_FAIL = 0x10 + VIOSRP_ADAPTER_FAIL = 0x10, + VIOSRP_OK2 = 0x99, }; struct viosrp_crq { -- cgit v1.2.3 From c433a1b6426880d3e23267938c3542706f3d03a6 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Tue, 27 May 2008 16:07:26 -0500 Subject: electra_cf: Add MODULE_DEVICE_TABLE() Add a module device table to electra_cf so that modules can be auto-probed/loaded. Signed-off-by: Olof Johansson --- drivers/pcmcia/electra_cf.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/pcmcia/electra_cf.c b/drivers/pcmcia/electra_cf.c index 0a6cea1316b..52d0aa8c2e7 100644 --- a/drivers/pcmcia/electra_cf.c +++ b/drivers/pcmcia/electra_cf.c @@ -352,6 +352,7 @@ static struct of_device_id electra_cf_match[] = { }, {}, }; +MODULE_DEVICE_TABLE(of, electra_cf_match); static struct of_platform_driver electra_cf_driver = { .name = (char *)driver_name, -- cgit v1.2.3 From b3bd307c628af2f0a581c42d5d7e4bcdbbf64b6a Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Tue, 27 May 2008 19:08:23 +0900 Subject: shpchp: add message about shpchp_slot_with_bus option Some (broken?) platform assign the same slot name to multiple hotplug slots. On such system, slot initialization would fail because of name collision. The shpchp driver already have a "slot_with_bus" module option which adds the bus number into the slot name. This patch adds the message about this module option that will be displayed when slot name collision is detected. Signed-off-by: Kenji Kaneshige Signed-off-by: Kristen Carlson Accardi Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/shpchp_core.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index 1648076600f..97848654652 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -162,6 +162,10 @@ static int init_slots(struct controller *ctrl) retval = pci_hp_register(slot->hotplug_slot); if (retval) { err("pci_hp_register failed with error %d\n", retval); + if (retval == -EEXIST) + err("Failed to register slot because of name " + "collision. Try \'shpchp_slot_with_bus\' " + "module option.\n"); goto error_info; } -- cgit v1.2.3 From dbd79aed1aea2bece0bf43cc2ff3b2f9baf48a08 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Tue, 27 May 2008 19:03:16 +0900 Subject: pciehp: fix NULL dereference in interrupt handler Fix the following NULL dereference problem reported from Pierre Ossman and Ingo Molnar. pciehp: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0 pciehp: pciehp_find_slot: slot (device=0x0) not found BUG: unable to handle kernel NULL pointer dereference at 0000000000000070 IP: [] pciehp_handle_presence_change+0x7e/0x113 PGD 0 Oops: 0000 [1] CPU 0 Modules linked in: Pid: 1, comm: swapper Tainted: G W 2.6.26-rc3-sched-devel.git-00001-g2b99b26-dirty #170 RIP: 0010:[] [] pciehp_handle_presence_change+0x7e/0x113 RSP: 0000:ffff81003f83fbb0 EFLAGS: 00010046 RAX: 0000000000000039 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000046 RBP: ffff81003f83fbd0 R08: 0000000000000001 R09: ffffffff80245103 R10: 0000000000000020 R11: 0000000000000000 R12: ffff81003ea53a30 R13: 0000000000000000 R14: 0000000000000011 R15: ffffffff80495926 FS: 0000000000000000(0000) GS:ffffffff80be7400(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000000070 CR3: 0000000000201000 CR4: 00000000000006a0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff81003f83e000, task ffff81003f840000) Stack: 0000000000000008 ffff81003f83fbf6 ffff81003ea53a30 0000000000000008 ffff81003f83fc10 ffffffff80495ab4 0000000000000011 0000000000000002 0000000000000202 0000000000000202 00000000fffffff4 ffff81003ea53a30 Call Trace: [] pcie_isr+0x18e/0x1bc [] request_irq+0x106/0x12f [] pcie_init+0x15e/0x6cc [] pciehp_probe+0x64/0x541 [] pcie_port_probe_service+0x4c/0x76 [] driver_probe_device+0xd4/0x1f0 [] __driver_attach+0x7c/0x7e [] ? __driver_attach+0x0/0x7e [] bus_for_each_dev+0x53/0x7d [] driver_attach+0x1c/0x1e [] bus_add_driver+0xdd/0x25b [] ? pcied_init+0x0/0x8b [] driver_register+0x5f/0x13e [] ? pcied_init+0x0/0x8b [] pcie_port_service_register+0x47/0x49 [] pcied_init+0x15/0x8b [] kernel_init+0x75/0x243 [] ? _spin_unlock_irq+0x2b/0x3a [] ? finish_task_switch+0x57/0x9a [] child_rip+0xa/0x12 [] ? restore_args+0x0/0x30 [] ? kernel_init+0x0/0x243 [] ? child_rip+0x0/0x12 Code: 83 80 00 00 00 48 39 f0 75 e1 0f b6 c9 48 c7 c2 00 0e 8d 80 48 c7 c6 8a 60 a6 80 48 c7 c7 10 db a8 80 31 c0 e8 3f 8d d9 ff 31 db <48> 8b 43 70 48 8d 75 ef 48 89 df ff 50 30 80 7d ef 00 74 37 48 RIP [] pciehp_handle_presence_change+0x7e/0x113 RSP CR2: 0000000000000070 Kernel panic - not syncing: Fatal exception The situation under which it occurs is hw and timing related: it appears to happen on a system that has PCI hotplug hardware but with no active hotplug cards, and another interrupt in the same (shared) IRQ line arrives too early, before the hotplug-slot entry has been set up - as triggered by CONFIG_DEBUG_SHIRQ=y: This patch contains the following two fixes. (1) Clear all events bits in Slot Status register to prevent the pciehp driver from detecting the spurious events that would have been occur before pciehp loading. (2) Add check whether slot initialization had been already done. This is short term fix. We need more structural fixes to install interrupt handler after slot initialization is done. Signed-off-by: Ingo Molnar Signed-off-by: Kenji Kaneshige Signed-off-by: Kristen Carlson Accardi Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp.h | 8 ++++---- drivers/pci/hotplug/pciehp_ctrl.c | 22 +++++--------------- drivers/pci/hotplug/pciehp_hpc.c | 42 ++++++++++++++++++++++++++------------- 3 files changed, 37 insertions(+), 35 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index 8264a768043..920091c4b18 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -146,10 +146,10 @@ struct controller { extern int pciehp_sysfs_enable_slot(struct slot *slot); extern int pciehp_sysfs_disable_slot(struct slot *slot); -extern u8 pciehp_handle_attention_button(u8 hp_slot, struct controller *ctrl); -extern u8 pciehp_handle_switch_change(u8 hp_slot, struct controller *ctrl); -extern u8 pciehp_handle_presence_change(u8 hp_slot, struct controller *ctrl); -extern u8 pciehp_handle_power_fault(u8 hp_slot, struct controller *ctrl); +extern u8 pciehp_handle_attention_button(struct slot *p_slot); + extern u8 pciehp_handle_switch_change(struct slot *p_slot); +extern u8 pciehp_handle_presence_change(struct slot *p_slot); +extern u8 pciehp_handle_power_fault(struct slot *p_slot); extern int pciehp_configure_device(struct slot *p_slot); extern int pciehp_unconfigure_device(struct slot *p_slot); extern void pciehp_queue_pushbutton_work(struct work_struct *work); diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c index 0a7aa628e95..7ad8a7dbc1a 100644 --- a/drivers/pci/hotplug/pciehp_ctrl.c +++ b/drivers/pci/hotplug/pciehp_ctrl.c @@ -55,16 +55,13 @@ static int queue_interrupt_event(struct slot *p_slot, u32 event_type) return 0; } -u8 pciehp_handle_attention_button(u8 hp_slot, struct controller *ctrl) +u8 pciehp_handle_attention_button(struct slot *p_slot) { - struct slot *p_slot; u32 event_type; /* Attention Button Change */ dbg("pciehp: Attention button interrupt received.\n"); - p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); - /* * Button pressed - See if need to TAKE ACTION!!! */ @@ -76,18 +73,15 @@ u8 pciehp_handle_attention_button(u8 hp_slot, struct controller *ctrl) return 0; } -u8 pciehp_handle_switch_change(u8 hp_slot, struct controller *ctrl) +u8 pciehp_handle_switch_change(struct slot *p_slot) { - struct slot *p_slot; u8 getstatus; u32 event_type; /* Switch Change */ dbg("pciehp: Switch interrupt received.\n"); - p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); - if (getstatus) { /* * Switch opened @@ -107,17 +101,14 @@ u8 pciehp_handle_switch_change(u8 hp_slot, struct controller *ctrl) return 1; } -u8 pciehp_handle_presence_change(u8 hp_slot, struct controller *ctrl) +u8 pciehp_handle_presence_change(struct slot *p_slot) { - struct slot *p_slot; u32 event_type; u8 presence_save; /* Presence Change */ dbg("pciehp: Presence/Notify input change.\n"); - p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); - /* Switch is open, assume a presence change * Save the presence state */ @@ -141,16 +132,13 @@ u8 pciehp_handle_presence_change(u8 hp_slot, struct controller *ctrl) return 1; } -u8 pciehp_handle_power_fault(u8 hp_slot, struct controller *ctrl) +u8 pciehp_handle_power_fault(struct slot *p_slot) { - struct slot *p_slot; u32 event_type; /* power fault */ dbg("pciehp: Power fault interrupt received.\n"); - p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); - if ( !(p_slot->hpc_ops->query_power_fault(p_slot))) { /* * power fault Cleared @@ -163,7 +151,7 @@ u8 pciehp_handle_power_fault(u8 hp_slot, struct controller *ctrl) */ info("Power fault on Slot(%s)\n", p_slot->name); event_type = INT_POWER_FAULT; - info("power fault bit %x set\n", hp_slot); + info("power fault bit %x set\n", 0); } queue_interrupt_event(p_slot, event_type); diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 891f81a0400..425a0f60997 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -722,6 +722,7 @@ static irqreturn_t pcie_isr(int irq, void *dev_id) { struct controller *ctrl = (struct controller *)dev_id; u16 detected, intr_loc; + struct slot *p_slot; /* * In order to guarantee that all interrupt events are @@ -756,21 +757,38 @@ static irqreturn_t pcie_isr(int irq, void *dev_id) wake_up_interruptible(&ctrl->queue); } + if (!(intr_loc & ~CMD_COMPLETED)) + return IRQ_HANDLED; + + /* + * Return without handling events if this handler routine is + * called before controller initialization is done. This may + * happen if hotplug event or another interrupt that shares + * the IRQ with pciehp arrives before slot initialization is + * done after interrupt handler is registered. + * + * FIXME - Need more structural fixes. We need to be ready to + * handle the event before installing interrupt handler. + */ + p_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset); + if (!p_slot || !p_slot->hpc_ops) + return IRQ_HANDLED; + /* Check MRL Sensor Changed */ if (intr_loc & MRL_SENS_CHANGED) - pciehp_handle_switch_change(0, ctrl); + pciehp_handle_switch_change(p_slot); /* Check Attention Button Pressed */ if (intr_loc & ATTN_BUTTN_PRESSED) - pciehp_handle_attention_button(0, ctrl); + pciehp_handle_attention_button(p_slot); /* Check Presence Detect Changed */ if (intr_loc & PRSN_DETECT_CHANGED) - pciehp_handle_presence_change(0, ctrl); + pciehp_handle_presence_change(p_slot); /* Check Power Fault Detected */ if (intr_loc & PWR_FAULT_DETECTED) - pciehp_handle_power_fault(0, ctrl); + pciehp_handle_power_fault(p_slot); return IRQ_HANDLED; } @@ -1028,6 +1046,12 @@ static int pciehp_acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev) static int pcie_init_hardware_part1(struct controller *ctrl, struct pcie_device *dev) { + /* Clear all remaining event bits in Slot Status register */ + if (pciehp_writew(ctrl, SLOTSTATUS, 0x1f)) { + err("%s: Cannot write to SLOTSTATUS register\n", __func__); + return -1; + } + /* Mask Hot-plug Interrupt Enable */ if (pcie_write_cmd(ctrl, 0, HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE)) { err("%s: Cannot mask hotplug interrupt enable\n", __func__); @@ -1040,16 +1064,6 @@ int pcie_init_hardware_part2(struct controller *ctrl, struct pcie_device *dev) { u16 cmd, mask; - /* - * We need to clear all events before enabling hotplug interrupt - * notification mechanism in order for hotplug controler to - * generate interrupts. - */ - if (pciehp_writew(ctrl, SLOTSTATUS, 0x1f)) { - err("%s: Cannot write to SLOTSTATUS register\n", __FUNCTION__); - return -1; - } - cmd = PRSN_DETECT_ENABLE; if (ATTN_BUTTN(ctrl)) cmd |= ATTN_BUTTN_ENABLE; -- cgit v1.2.3 From 5808639bfa98d69f77a481d759570d85f164fea0 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Tue, 27 May 2008 19:04:30 +0900 Subject: pciehp: fix slow probing Fix the "pciehp probing slow" problem reported from Jan C. Nordholz in http://bugzilla.kernel.org/show_bug.cgi?id=10751. The command completed bit in Slot Status register applies only to commands issued to control the attention indicator, power indicator, power controller, or electromechanical interlock. However, writes to other parts of the Slot Control register would end up writing to the control fields. Hence, any write to Slot Control register is considered as a command. However, if the controller doesn't support any of attention indicator, power indicator, power controller and electromechanical interlock, command completed bit would not set in writing to Slot Control register. In this case, we should not wait for command completed bit set, otherwise all commands would be considered not completed in timeout seconds (1 sec.). The cause of the problem is pciehp driver didn't take this situation into account. This patch changes pciehp to take it into account. This patch also add the check for "No Command Completed Support" bit in Slot Capability register. If it is set, we should not wait for command completed bit set as well. This problem seems to be revealed by the commit c27fb883dffe11aa4cb35ecea1fa1832ba45d4da that fixed the bug that pciehp did not wait for command completed properly (pciehp just ignored the command completion event). Signed-off-by: Kenji Kaneshige Signed-off-by: Kristen Carlson Accardi Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp.h | 3 +++ drivers/pci/hotplug/pciehp_hpc.c | 40 +++++++++++++++++++++++++++++++++------- 2 files changed, 36 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index 920091c4b18..79c9ddaad3f 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -97,6 +97,7 @@ struct controller { u8 cap_base; struct timer_list poll_timer; volatile int cmd_busy; + unsigned int no_cmd_complete:1; }; #define INT_BUTTON_IGNORE 0 @@ -135,6 +136,7 @@ struct controller { #define PWR_LED_PRSN 0x00000010 #define HP_SUPR_RM_SUP 0x00000020 #define EMI_PRSN 0x00020000 +#define NO_CMD_CMPL_SUP 0x00040000 #define ATTN_BUTTN(ctrl) ((ctrl)->slot_cap & ATTN_BUTTN_PRSN) #define POWER_CTRL(ctrl) ((ctrl)->slot_cap & PWR_CTRL_PRSN) @@ -143,6 +145,7 @@ struct controller { #define PWR_LED(ctrl) ((ctrl)->slot_cap & PWR_LED_PRSN) #define HP_SUPR_RM(ctrl) ((ctrl)->slot_cap & HP_SUPR_RM_SUP) #define EMI(ctrl) ((ctrl)->slot_cap & EMI_PRSN) +#define NO_CMD_CMPL(ctrl) ((ctrl)->slot_cap & NO_CMD_CMPL_SUP) extern int pciehp_sysfs_enable_slot(struct slot *slot); extern int pciehp_sysfs_disable_slot(struct slot *slot); diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 425a0f60997..70940fb3fff 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -286,12 +286,28 @@ static int pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask) goto out; } - if ((slot_status & CMD_COMPLETED) == CMD_COMPLETED ) { - /* After 1 sec and CMD_COMPLETED still not set, just - proceed forward to issue the next command according - to spec. Just print out the error message */ - dbg("%s: CMD_COMPLETED not clear after 1 sec.\n", - __func__); + if (slot_status & CMD_COMPLETED) { + if (!ctrl->no_cmd_complete) { + /* + * After 1 sec and CMD_COMPLETED still not set, just + * proceed forward to issue the next command according + * to spec. Just print out the error message. + */ + dbg("%s: CMD_COMPLETED not clear after 1 sec.\n", + __func__); + } else if (!NO_CMD_CMPL(ctrl)) { + /* + * This controller semms to notify of command completed + * event even though it supports none of power + * controller, attention led, power led and EMI. + */ + dbg("%s: Unexpected CMD_COMPLETED. Need to wait for " + "command completed event.\n", __func__); + ctrl->no_cmd_complete = 0; + } else { + dbg("%s: Unexpected CMD_COMPLETED. Maybe the " + "controller is broken.\n", __func__); + } } retval = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl); @@ -315,7 +331,7 @@ static int pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask) /* * Wait for command completion. */ - if (!retval) + if (!retval && !ctrl->no_cmd_complete) retval = pcie_wait_cmd(ctrl); out: mutex_unlock(&ctrl->ctrl_lock); @@ -1130,6 +1146,7 @@ static inline void dbg_ctrl(struct controller *ctrl) dbg(" Power Indicator : %3s\n", PWR_LED(ctrl) ? "yes" : "no"); dbg(" Hot-Plug Surprise : %3s\n", HP_SUPR_RM(ctrl) ? "yes" : "no"); dbg(" EMI Present : %3s\n", EMI(ctrl) ? "yes" : "no"); + dbg(" Comamnd Completed : %3s\n", NO_CMD_CMPL(ctrl)? "no" : "yes"); pciehp_readw(ctrl, SLOTSTATUS, ®16); dbg("Slot Status : 0x%04x\n", reg16); pciehp_readw(ctrl, SLOTSTATUS, ®16); @@ -1161,6 +1178,15 @@ int pcie_init(struct controller *ctrl, struct pcie_device *dev) mutex_init(&ctrl->ctrl_lock); init_waitqueue_head(&ctrl->queue); dbg_ctrl(ctrl); + /* + * Controller doesn't notify of command completion if the "No + * Command Completed Support" bit is set in Slot Capability + * register or the controller supports none of power + * controller, attention led, power led and EMI. + */ + if (NO_CMD_CMPL(ctrl) || + !(POWER_CTRL(ctrl) | ATTN_LED(ctrl) | PWR_LED(ctrl) | EMI(ctrl))) + ctrl->no_cmd_complete = 1; info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n", pdev->vendor, pdev->device, -- cgit v1.2.3 From 6592e02ae4bd7b277230aa0c5821588a13b9d8e3 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Tue, 27 May 2008 19:05:26 +0900 Subject: pciehp: poll cmd completion if hotplug interrupt is disabled Fix improper long wait for command completion in pciehp probing. As described in PCI Express specification, software notification is not generated if the command that occurs as a result of a write to the Slot Control register that disables software notification of command completed events. Since pciehp driver doesn't take it into account, such command is issued in pciehp probing, and it causes improper long wait for command completion. This patch changes the pciehp driver to take such command into account. Signed-off-by: Kenji Kaneshige Signed-off-by: Kristen Carlson Accardi Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp_hpc.c | 42 ++++++++++++++++++++++++++++++++++++---- 1 file changed, 38 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 70940fb3fff..eb631af9473 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -247,14 +247,38 @@ static inline void pciehp_free_irq(struct controller *ctrl) free_irq(ctrl->pci_dev->irq, ctrl); } -static inline int pcie_wait_cmd(struct controller *ctrl) +static inline int pcie_poll_cmd(struct controller *ctrl) +{ + u16 slot_status; + int timeout = 1000; + + if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status)) + if (slot_status & CMD_COMPLETED) + goto completed; + for (timeout = 1000; timeout > 0; timeout -= 100) { + msleep(100); + if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status)) + if (slot_status & CMD_COMPLETED) + goto completed; + } + return 0; /* timeout */ + +completed: + pciehp_writew(ctrl, SLOTSTATUS, CMD_COMPLETED); + return timeout; +} + +static inline int pcie_wait_cmd(struct controller *ctrl, int poll) { int retval = 0; unsigned int msecs = pciehp_poll_mode ? 2500 : 1000; unsigned long timeout = msecs_to_jiffies(msecs); int rc; - rc = wait_event_interruptible_timeout(ctrl->queue, + if (poll) + rc = pcie_poll_cmd(ctrl); + else + rc = wait_event_interruptible_timeout(ctrl->queue, !ctrl->cmd_busy, timeout); if (!rc) dbg("Command not completed in 1000 msec\n"); @@ -331,8 +355,18 @@ static int pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask) /* * Wait for command completion. */ - if (!retval && !ctrl->no_cmd_complete) - retval = pcie_wait_cmd(ctrl); + if (!retval && !ctrl->no_cmd_complete) { + int poll = 0; + /* + * if hotplug interrupt is not enabled or command + * completed interrupt is not enabled, we need to poll + * command completed event. + */ + if (!(slot_ctrl & HP_INTR_ENABLE) || + !(slot_ctrl & CMD_CMPL_INTR_ENABLE)) + poll = 1; + retval = pcie_wait_cmd(ctrl, poll); + } out: mutex_unlock(&ctrl->ctrl_lock); return retval; -- cgit v1.2.3 From 0711c70ec0e9d2c002b1e9b5fb9f21e49d77f4fd Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Tue, 27 May 2008 19:06:22 +0900 Subject: pciehp: move msleep after power off According to the PCI Express specification, we must wait for at least 1 second after turning power off before taking any action that relies on power having been removed from the slot/adapter. For this, current pciehp wait for 1 second after issuing the power off command in hpc_power_off_slot() function. But waiting for 1 second in hpc_power_off_slot() can make pciehp probing slow-down because pciehp probe code calls hpc_power_off_slot() if the slot is not occupied just in case. We don't need to wait for 1 second at the pciehp probe time because there is no action on that empty slot. So move 1 second wait from hpc_power_off_slot() to the caller of hpc_power_off_slot(). Signed-off-by: Kenji Kaneshige Signed-off-by: Kristen Carlson Accardi Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp_ctrl.c | 14 ++++++++++++++ drivers/pci/hotplug/pciehp_hpc.c | 7 ------- 2 files changed, 14 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c index 7ad8a7dbc1a..96a5d55a498 100644 --- a/drivers/pci/hotplug/pciehp_ctrl.c +++ b/drivers/pci/hotplug/pciehp_ctrl.c @@ -174,6 +174,13 @@ static void set_slot_off(struct controller *ctrl, struct slot * pslot) } } + /* + * After turning power off, we must wait for at least 1 second + * before taking any action that relies on power having been + * removed from the slot/adapter. + */ + msleep(1000); + if (PWR_LED(ctrl)) pslot->hpc_ops->green_led_off(pslot); @@ -277,6 +284,13 @@ static int remove_board(struct slot *p_slot) } } + /* + * After turning power off, we must wait for at least 1 second + * before taking any action that relies on power having been + * removed from the slot/adapter. + */ + msleep(1000); + if (PWR_LED(ctrl)) /* turn off Green LED */ p_slot->hpc_ops->green_led_off(p_slot); diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index eb631af9473..79f10496316 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -754,13 +754,6 @@ static int hpc_power_off_slot(struct slot * slot) } dbg("%s: SLOTCTRL %x write cmd %x\n", __func__, ctrl->cap_base + SLOTCTRL, slot_cmd); - - /* - * After turning power off, we must wait for at least 1 second - * before taking any action that relies on power having been - * removed from the slot/adapter. - */ - msleep(1000); out: if (changed) pcie_unmask_bad_dllp(ctrl); -- cgit v1.2.3 From a86161b3134465f072d965ca7508ec9c1e2e52c7 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Tue, 27 May 2008 19:07:01 +0900 Subject: pci hotplug core: add check of duplicate slot name Fix the following errors reported by Jan C. Nordholz in http://bugzilla.kernel.org/show_bug.cgi?id=10751. kobject_add_internal failed for 2 with -EEXIST, don't try to register things with the same name in the same directory. Pid: 1, comm: swapper Tainted: G W 2.6.26-rc3 #1 [] kobject_add_internal+0x140/0x190 [] kobject_init_and_add+0x2d/0x40 [] pci_hp_register+0x81/0x2f0 [] pciehp_probe+0x1a7/0x470 [] sysfs_add_one+0x44/0xa0 [] sysfs_addrm_start+0x3f/0xb0 [] sysfs_create_link+0x8a/0xf0 [] pcie_port_probe_service+0x50/0x80 [] driver_sysfs_add+0x55/0x70 [] driver_probe_device+0x82/0x180 [] __driver_attach+0x6c/0x70 [] bus_for_each_dev+0x3a/0x60 [] pcied_init+0x0/0x80 [] driver_attach+0x16/0x20 [] __driver_attach+0x0/0x70 [] bus_add_driver+0x1a1/0x220 [] pcied_init+0x0/0x80 [] driver_register+0x4d/0x120 [] ibm_acpiphp_init+0x0/0x190 [] printk+0x1b/0x20 [] pcied_init+0x0/0x80 [] pcied_init+0xe/0x80 [] kernel_init+0x10a/0x300 [] schedule_tail+0x18/0x50 [] ret_from_fork+0x6/0x1c [] kernel_init+0x0/0x300 [] kernel_init+0x0/0x300 [] kernel_thread_helper+0x7/0x1c ======================= pci_hotplug: Unable to register kobject '2'<3>pciehp: pci_hp_register failed with error -22 Slot with the same name can be registered multiple times if shpchp or pciehp driver is loaded after acpiphp is loaded because ACPI based hotplug driver and Native OS hotplug driver trying to handle the same physical slot. In this case, current pci_hotplug core will call kobject_init_and_add() muliple time with the same name. This is the cause of this problem. To fix this problem, this patch adds the check into pci_hp_register() to see if the slot with the same name. Signed-off-by: Kenji Kaneshige Signed-off-by: Kristen Carlson Accardi Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pci_hotplug_core.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c index 925ba16355c..a11021e8ce3 100644 --- a/drivers/pci/hotplug/pci_hotplug_core.c +++ b/drivers/pci/hotplug/pci_hotplug_core.c @@ -619,6 +619,7 @@ static struct hotplug_slot *get_slot_from_name (const char *name) int pci_hp_register (struct hotplug_slot *slot) { int result; + struct hotplug_slot *tmp; if (slot == NULL) return -ENODEV; @@ -630,7 +631,11 @@ int pci_hp_register (struct hotplug_slot *slot) return -EINVAL; } - /* this can fail if we have already registered a slot with the same name */ + /* Check if we have already registered a slot with the same name. */ + tmp = get_slot_from_name(slot->name); + if (tmp) + return -EEXIST; + slot->kobj.kset = pci_hotplug_slots_kset; result = kobject_init_and_add(&slot->kobj, &hotplug_slot_ktype, NULL, "%s", slot->name); -- cgit v1.2.3 From 9e4f2e8d4ddb04ad16a3828cd9a369a5a5287009 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Tue, 27 May 2008 19:07:33 +0900 Subject: pciehp: add message about pciehp_slot_with_bus option Some (broken?) platform assign the same slot name to multiple hotplug slots. On such system, slot initialization would fail because of name collision. The pciehp driver already have a "slot_with_bus" module option which adds the bus number into the slot name. This patch adds the message about this module option that will be displayed when slot name collision is detected. Signed-off-by: Kenji Kaneshige Signed-off-by: Kristen Carlson Accardi Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp_core.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index 43d8ddb2d67..48a2ed37891 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -254,7 +254,11 @@ static int init_slots(struct controller *ctrl) slot->hp_slot, slot->number, ctrl->slot_device_offset); retval = pci_hp_register(hotplug_slot); if (retval) { - err ("pci_hp_register failed with error %d\n", retval); + err("pci_hp_register failed with error %d\n", retval); + if (retval == -EEXIST) + err("Failed to register slot because of name " + "collision. Try \'pciehp_slot_with_bus\' " + "module option.\n"); goto error_info; } /* create additional sysfs entries */ -- cgit v1.2.3 From 57f5b1590f2d801a3a7f072e2c65f14d4545852c Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 28 May 2008 00:54:01 -0400 Subject: Input: atkbd - mark keyboard as disabled when suspending/unloading This will shut off garbage that may come from KBD port during resume. Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/atkbd.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 4a95adc4cc7..af58a6f1e89 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -807,6 +807,8 @@ static int atkbd_activate(struct atkbd *atkbd) static void atkbd_cleanup(struct serio *serio) { struct atkbd *atkbd = serio_get_drvdata(serio); + + atkbd_disable(atkbd); ps2_command(&atkbd->ps2dev, NULL, ATKBD_CMD_RESET_BAT); } -- cgit v1.2.3 From 827e609b4581282b98bdf7666f6e93ff1bd1a63e Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 28 May 2008 12:49:56 -0500 Subject: kgdb: use common ascii helpers and put_unaligned_be32 helper Signed-off-by: Harvey Harrison Signed-off-by: Andrew Morton Signed-off-by: Jason Wessel --- drivers/misc/kgdbts.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c index fa394104339..2763ae08653 100644 --- a/drivers/misc/kgdbts.c +++ b/drivers/misc/kgdbts.c @@ -119,7 +119,6 @@ } while (0) #define MAX_CONFIG_LEN 40 -static const char hexchars[] = "0123456789abcdef"; static struct kgdb_io kgdbts_io_ops; static char get_buf[BUFMAX]; static int get_buf_cnt; @@ -619,8 +618,8 @@ static void fill_get_buf(char *buf) count++; } strcat(get_buf, "#"); - get_buf[count + 2] = hexchars[checksum >> 4]; - get_buf[count + 3] = hexchars[checksum & 0xf]; + get_buf[count + 2] = hex_asc_hi(checksum); + get_buf[count + 3] = hex_asc_lo(checksum); get_buf[count + 4] = '\0'; v2printk("get%i: %s\n", ts.idx, get_buf); } -- cgit v1.2.3 From b33cb815b565a94c654a0fe8e62e36f5b4053888 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Wed, 28 May 2008 12:49:57 -0500 Subject: kgdbts: Use HW breakpoints with CONFIG_DEBUG_RODATA Whenever CONFIG_DEBUG_RODATA is set in the kernel config many kernel text sections become read-only, and the use of software breakpoints in the kgdb tests will cause the kernel to fail to complete the start up. Until such time that there is an official API for modifying read-only text sections hardware breakpoints must be used to run the do_fork or sys_open tests or the tests get skipped. Also fix the duplicated include reported by: Huang Weiyi Signed-off-by: Jason Wessel --- drivers/misc/kgdbts.c | 28 ++++++++++++++++++++++++---- 1 file changed, 24 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c index 2763ae08653..e4ff50b95a5 100644 --- a/drivers/misc/kgdbts.c +++ b/drivers/misc/kgdbts.c @@ -102,7 +102,6 @@ #include #include #include -#include #define v1printk(a...) do { \ if (verbose) \ @@ -130,6 +129,8 @@ static int repeat_test; static int test_complete; static int send_ack; static int final_ack; +static int force_hwbrks; +static int hwbreaks_ok; static int hw_break_val; static int hw_break_val2; #if defined(CONFIG_ARM) || defined(CONFIG_MIPS) || defined(CONFIG_SPARC) @@ -233,12 +234,12 @@ static void break_helper(char *bp_type, char *arg, unsigned long vaddr) static void sw_break(char *arg) { - break_helper("Z0", arg, 0); + break_helper(force_hwbrks ? "Z1" : "Z0", arg, 0); } static void sw_rem_break(char *arg) { - break_helper("z0", arg, 0); + break_helper(force_hwbrks ? "z1" : "z0", arg, 0); } static void hw_break(char *arg) @@ -780,6 +781,8 @@ static void run_breakpoint_test(int is_hw_breakpoint) return; eprintk("kgdbts: ERROR %s test failed\n", ts.name); + if (is_hw_breakpoint) + hwbreaks_ok = 0; } static void run_hw_break_test(int is_write_test) @@ -797,9 +800,11 @@ static void run_hw_break_test(int is_write_test) kgdb_breakpoint(); hw_break_val_access(); if (is_write_test) { - if (test_complete == 2) + if (test_complete == 2) { eprintk("kgdbts: ERROR %s broke on access\n", ts.name); + hwbreaks_ok = 0; + } hw_break_val_write(); } kgdb_breakpoint(); @@ -808,6 +813,7 @@ static void run_hw_break_test(int is_write_test) return; eprintk("kgdbts: ERROR %s test failed\n", ts.name); + hwbreaks_ok = 0; } static void run_nmi_sleep_test(int nmi_sleep) @@ -911,6 +917,7 @@ static void kgdbts_run_tests(void) /* All HW break point tests */ if (arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT) { + hwbreaks_ok = 1; v1printk("kgdbts:RUN hw breakpoint test\n"); run_breakpoint_test(1); v1printk("kgdbts:RUN hw write breakpoint test\n"); @@ -924,6 +931,19 @@ static void kgdbts_run_tests(void) run_nmi_sleep_test(nmi_sleep); } +#ifdef CONFIG_DEBUG_RODATA + /* Until there is an api to write to read-only text segments, use + * HW breakpoints for the remainder of any tests, else print a + * failure message if hw breakpoints do not work. + */ + if (!(arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT && hwbreaks_ok)) { + eprintk("kgdbts: HW breakpoints do not work," + "skipping remaining tests\n"); + return; + } + force_hwbrks = 1; +#endif /* CONFIG_DEBUG_RODATA */ + /* If the do_fork test is run it will be the last test that is * executed because a kernel thread will be spawned at the very * end to unregister the debug hooks. -- cgit v1.2.3 From 471637a575329f9250e7e4099e84084820a35e11 Mon Sep 17 00:00:00 2001 From: Antonio Ospite Date: Wed, 28 May 2008 14:35:52 -0400 Subject: Input: pxa27x_keypad - miscellaneous fixes 1. Set input bits for direct keys codes 2. Set input bits for rotary encoder codes only if rotary encoder is enabled 3. Enable EV_REL only if rotary encoder is enabled and rel_codes are set up Signed-off-by: Antonio Ospite Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/pxa27x_keypad.c | 38 ++++++++++++++++++++++------------ 1 file changed, 25 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c index 3dea0c5077a..45767e73f07 100644 --- a/drivers/input/keyboard/pxa27x_keypad.c +++ b/drivers/input/keyboard/pxa27x_keypad.c @@ -136,6 +136,9 @@ static void pxa27x_keypad_build_keycode(struct pxa27x_keypad *keypad) set_bit(code, input_dev->keybit); } + for (i = 0; i < pdata->direct_key_num; i++) + set_bit(pdata->direct_key_map[i], input_dev->keybit); + keypad->rotary_up_key[0] = pdata->rotary0_up_key; keypad->rotary_up_key[1] = pdata->rotary1_up_key; keypad->rotary_down_key[0] = pdata->rotary0_down_key; @@ -143,17 +146,21 @@ static void pxa27x_keypad_build_keycode(struct pxa27x_keypad *keypad) keypad->rotary_rel_code[0] = pdata->rotary0_rel_code; keypad->rotary_rel_code[1] = pdata->rotary1_rel_code; - if (pdata->rotary0_up_key && pdata->rotary0_down_key) { - set_bit(pdata->rotary0_up_key, input_dev->keybit); - set_bit(pdata->rotary0_down_key, input_dev->keybit); - } else - set_bit(pdata->rotary0_rel_code, input_dev->relbit); - - if (pdata->rotary1_up_key && pdata->rotary1_down_key) { - set_bit(pdata->rotary1_up_key, input_dev->keybit); - set_bit(pdata->rotary1_down_key, input_dev->keybit); - } else - set_bit(pdata->rotary1_rel_code, input_dev->relbit); + if (pdata->enable_rotary0) { + if (pdata->rotary0_up_key && pdata->rotary0_down_key) { + set_bit(pdata->rotary0_up_key, input_dev->keybit); + set_bit(pdata->rotary0_down_key, input_dev->keybit); + } else + set_bit(pdata->rotary0_rel_code, input_dev->relbit); + } + + if (pdata->enable_rotary1) { + if (pdata->rotary1_up_key && pdata->rotary1_down_key) { + set_bit(pdata->rotary1_up_key, input_dev->keybit); + set_bit(pdata->rotary1_down_key, input_dev->keybit); + } else + set_bit(pdata->rotary1_rel_code, input_dev->relbit); + } } static inline unsigned int lookup_matrix_keycode( @@ -484,8 +491,13 @@ static int __devinit pxa27x_keypad_probe(struct platform_device *pdev) keypad->input_dev = input_dev; input_set_drvdata(input_dev, keypad); - input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | - BIT_MASK(EV_REL); + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); + if ((keypad->pdata->enable_rotary0 && + keypad->pdata->rotary0_rel_code) || + (keypad->pdata->enable_rotary1 && + keypad->pdata->rotary1_rel_code)) { + input_dev->evbit[0] |= BIT_MASK(EV_REL); + } pxa27x_keypad_build_keycode(keypad); platform_set_drvdata(pdev, keypad); -- cgit v1.2.3 From 6f6c218f68e632e4596cae6e6d43658d26a5e0fe Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 27 May 2008 17:01:55 -0400 Subject: rtl8180: avoid NULL dereference in max2820_rf_set_channel The static function max2820_rf_set_channel is called with conf == NULL within its compilation unit. Originally this defaulted to b/g channel 1, but "cfg80211 API for channels/bitrates, mac80211 and driver conversion" (commit 8318d78a44d49ac1edf2bdec7299de3617c4232e) mistakenly dropped this check. This patch minimally restores the expected behavior. Reported-by: Colin Lai Signed-off-by: John W. Linville --- drivers/net/wireless/rtl8180_max2820.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rtl8180_max2820.c b/drivers/net/wireless/rtl8180_max2820.c index a34dfd382b6..a140c802264 100644 --- a/drivers/net/wireless/rtl8180_max2820.c +++ b/drivers/net/wireless/rtl8180_max2820.c @@ -78,7 +78,8 @@ static void max2820_rf_set_channel(struct ieee80211_hw *dev, struct ieee80211_conf *conf) { struct rtl8180_priv *priv = dev->priv; - int channel = ieee80211_frequency_to_channel(conf->channel->center_freq); + int channel = conf ? + ieee80211_frequency_to_channel(conf->channel->center_freq) : 1; unsigned int chan_idx = channel - 1; u32 txpw = priv->channels[chan_idx].hw_value & 0xFF; u32 chan = max2820_chan[chan_idx]; -- cgit v1.2.3 From 0823b2c3c10a4db21cd39a8c72cda96b4dd6d914 Mon Sep 17 00:00:00 2001 From: Andrea Merello Date: Sat, 10 May 2008 13:30:12 +0200 Subject: rtl8180: fix wrong parameter in sa2400_rf_set_channel The sa2400 RF code needs to invoke sa2400_write_phy_antenna every time the channel is being switch. This should be done passing the channel number to that function. Incorrectly we were passing the same value that is written on the channel RF register. This may cause problems when operating on ch 14. This patch fixes it. Thanks to Alessandro Di Marco who found this issue! Signed-off-by: Andrea Merello Signed-off-by: John W. Linville --- drivers/net/wireless/rtl8180_sa2400.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rtl8180_sa2400.c b/drivers/net/wireless/rtl8180_sa2400.c index 0311b4ea124..cea4e0ccb92 100644 --- a/drivers/net/wireless/rtl8180_sa2400.c +++ b/drivers/net/wireless/rtl8180_sa2400.c @@ -86,7 +86,7 @@ static void sa2400_rf_set_channel(struct ieee80211_hw *dev, write_sa2400(dev, 7, txpw); - sa2400_write_phy_antenna(dev, chan); + sa2400_write_phy_antenna(dev, channel); write_sa2400(dev, 0, chan); write_sa2400(dev, 1, 0xbb50); -- cgit v1.2.3 From 0a0ab41e833c8184c6d4ab663f137d5bbd50e049 Mon Sep 17 00:00:00 2001 From: Andrea Merello Date: Sat, 10 May 2008 13:32:34 +0200 Subject: rtl8180: fix wrong parameter in max2820_rf_set_channel The max2820 RF code needs to invoke max2820_write_phy_antenna every time the channel is being switch. This should be done passing the channel number to that function. Incorrectly we were passing the same value that is written on the channel RF register. This may cause problems when operating on ch 14. This patch fixes it. Thanks to Alessandro Di Marco who found this issue! Signed-off-by: Andrea Merello Signed-off-by: John W. Linville --- drivers/net/wireless/rtl8180_max2820.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rtl8180_max2820.c b/drivers/net/wireless/rtl8180_max2820.c index a140c802264..6c825fd7f3b 100644 --- a/drivers/net/wireless/rtl8180_max2820.c +++ b/drivers/net/wireless/rtl8180_max2820.c @@ -88,7 +88,7 @@ static void max2820_rf_set_channel(struct ieee80211_hw *dev, * sa2400, for MAXIM we do this directly from BB */ rtl8180_write_phy(dev, 3, txpw); - max2820_write_phy_antenna(dev, chan); + max2820_write_phy_antenna(dev, channel); write_max2820(dev, 3, chan); } -- cgit v1.2.3 From bc1b1fb2753873314ad1bf56bc7d5b8dd447cd2a Mon Sep 17 00:00:00 2001 From: Andrea Merello Date: Sat, 10 May 2008 13:34:16 +0200 Subject: rtl8180: fix wrong parameter in grf5101_rf_set_channel The grf5101 RF code needs to invoke grf5101_write_phy_antenna every time the channel is being switch. This should be done passing the channel number to that function. Incorrectly we were passing the same value that is written on the channel RF register. This may cause problems when operating on ch 14. This patch fixes it. Thanks to Alessandro Di Marco who found this issue! Signed-off-by: Andrea Merello Signed-off-by: John W. Linville --- drivers/net/wireless/rtl8180_grf5101.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rtl8180_grf5101.c b/drivers/net/wireless/rtl8180_grf5101.c index 5d47935dbac..947ee55f18b 100644 --- a/drivers/net/wireless/rtl8180_grf5101.c +++ b/drivers/net/wireless/rtl8180_grf5101.c @@ -88,7 +88,7 @@ static void grf5101_rf_set_channel(struct ieee80211_hw *dev, write_grf5101(dev, 0x0B, chan); write_grf5101(dev, 0x07, 0x1000); - grf5101_write_phy_antenna(dev, chan); + grf5101_write_phy_antenna(dev, channel); } static void grf5101_rf_stop(struct ieee80211_hw *dev) -- cgit v1.2.3 From 6b4bec010d888c5b8c731aa596635cd83dd3416c Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Tue, 20 May 2008 12:16:28 +0200 Subject: b43: Upload both beacon templates on initial load This updates the beacon template code to upload both templates, if we never uploaded one before. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/net/wireless/b43/b43.h | 1 + drivers/net/wireless/b43/main.c | 58 +++++++++++++++++++++++++++++++---------- 2 files changed, 45 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index 37783cdd301..dfa4bdd5597 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -737,6 +737,7 @@ struct b43_wl { struct ieee80211_tx_control beacon_txctl; bool beacon0_uploaded; bool beacon1_uploaded; + bool beacon_templates_virgin; /* Never wrote the templates? */ struct work_struct beacon_update_trigger; /* The current QOS parameters for the 4 queues. diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 8fdba9415c0..b8e77751065 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -1544,6 +1544,30 @@ static void b43_write_probe_resp_template(struct b43_wldev *dev, kfree(probe_resp_data); } +static void b43_upload_beacon0(struct b43_wldev *dev) +{ + struct b43_wl *wl = dev->wl; + + if (wl->beacon0_uploaded) + return; + b43_write_beacon_template(dev, 0x68, 0x18); + /* FIXME: Probe resp upload doesn't really belong here, + * but we don't use that feature anyway. */ + b43_write_probe_resp_template(dev, 0x268, 0x4A, + &__b43_ratetable[3]); + wl->beacon0_uploaded = 1; +} + +static void b43_upload_beacon1(struct b43_wldev *dev) +{ + struct b43_wl *wl = dev->wl; + + if (wl->beacon1_uploaded) + return; + b43_write_beacon_template(dev, 0x468, 0x1A); + wl->beacon1_uploaded = 1; +} + static void handle_irq_beacon(struct b43_wldev *dev) { struct b43_wl *wl = dev->wl; @@ -1568,24 +1592,27 @@ static void handle_irq_beacon(struct b43_wldev *dev) return; } - if (!beacon0_valid) { - if (!wl->beacon0_uploaded) { - b43_write_beacon_template(dev, 0x68, 0x18); - b43_write_probe_resp_template(dev, 0x268, 0x4A, - &__b43_ratetable[3]); - wl->beacon0_uploaded = 1; - } + if (unlikely(wl->beacon_templates_virgin)) { + /* We never uploaded a beacon before. + * Upload both templates now, but only mark one valid. */ + wl->beacon_templates_virgin = 0; + b43_upload_beacon0(dev); + b43_upload_beacon1(dev); cmd = b43_read32(dev, B43_MMIO_MACCMD); cmd |= B43_MACCMD_BEACON0_VALID; b43_write32(dev, B43_MMIO_MACCMD, cmd); - } else if (!beacon1_valid) { - if (!wl->beacon1_uploaded) { - b43_write_beacon_template(dev, 0x468, 0x1A); - wl->beacon1_uploaded = 1; + } else { + if (!beacon0_valid) { + b43_upload_beacon0(dev); + cmd = b43_read32(dev, B43_MMIO_MACCMD); + cmd |= B43_MACCMD_BEACON0_VALID; + b43_write32(dev, B43_MMIO_MACCMD, cmd); + } else if (!beacon1_valid) { + b43_upload_beacon1(dev); + cmd = b43_read32(dev, B43_MMIO_MACCMD); + cmd |= B43_MACCMD_BEACON1_VALID; + b43_write32(dev, B43_MMIO_MACCMD, cmd); } - cmd = b43_read32(dev, B43_MMIO_MACCMD); - cmd |= B43_MACCMD_BEACON1_VALID; - b43_write32(dev, B43_MMIO_MACCMD, cmd); } } @@ -4073,6 +4100,9 @@ static int b43_op_start(struct ieee80211_hw *hw) wl->filter_flags = 0; wl->radiotap_enabled = 0; b43_qos_clear(wl); + wl->beacon0_uploaded = 0; + wl->beacon1_uploaded = 0; + wl->beacon_templates_virgin = 1; /* First register RFkill. * LEDs that are registered later depend on it. */ -- cgit v1.2.3 From 3bf0a32e22fedc0b46443699db2d61ac2a883ac4 Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Thu, 22 May 2008 16:32:16 +0200 Subject: b43: Fix controller restart crash This fixes a kernel crash on rmmod, in the case where the controller was restarted before doing the rmmod. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/net/wireless/b43/main.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index b8e77751065..6c3d9ea0a9f 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -4271,7 +4271,9 @@ static void b43_chip_reset(struct work_struct *work) goto out; } } - out: +out: + if (err) + wl->current_dev = NULL; /* Failed to init the dev. */ mutex_unlock(&wl->mutex); if (err) b43err(wl, "Controller restart FAILED\n"); @@ -4412,9 +4414,11 @@ static void b43_one_core_detach(struct ssb_device *dev) struct b43_wldev *wldev; struct b43_wl *wl; + /* Do not cancel ieee80211-workqueue based work here. + * See comment in b43_remove(). */ + wldev = ssb_get_drvdata(dev); wl = wldev->wl; - cancel_work_sync(&wldev->restart_work); b43_debugfs_remove_device(wldev); b43_wireless_core_detach(wldev); list_del(&wldev->list); @@ -4599,6 +4603,10 @@ static void b43_remove(struct ssb_device *dev) struct b43_wl *wl = ssb_get_devtypedata(dev); struct b43_wldev *wldev = ssb_get_drvdata(dev); + /* We must cancel any work here before unregistering from ieee80211, + * as the ieee80211 unreg will destroy the workqueue. */ + cancel_work_sync(&wldev->restart_work); + B43_WARN_ON(!wl); if (wl->current_dev == wldev) ieee80211_unregister_hw(wl->hw); -- cgit v1.2.3 From 0f3e63a55b1a7b695a79bf3eec2ff5ab6b336037 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Fri, 23 May 2008 18:13:41 +0200 Subject: rt2x00: Fix memleak in tx() path When the tx() handler runs while the device has disapeared, we did return NETDEV_TX_OK but didn't free the skb. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00mac.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index c206b509207..87e280a2197 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -93,6 +93,7 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb, */ if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) { ieee80211_stop_queues(hw); + dev_kfree_skb_any(skb); return NETDEV_TX_OK; } -- cgit v1.2.3 From 2088d4174e4292aef892bb7095fc3c3ea5bd117c Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Fri, 23 May 2008 18:13:49 +0200 Subject: rt2x00: Don't count retries as failure Link quality estimation became quite low for all rt2x00 drivers because the number of retries it took to send the frame were counted as failure. This does not correspond to the legacy driver link quality calculation, by not counting it we will send somewhat more optimistic values to mac80211. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index b22c0273718..e0767f0cb3d 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -507,7 +507,7 @@ void rt2x00lib_txdone(struct queue_entry *entry, * Update TX statistics. */ rt2x00dev->link.qual.tx_success += success; - rt2x00dev->link.qual.tx_failed += txdesc->retry + fail; + rt2x00dev->link.qual.tx_failed += fail; /* * Initialize TX status -- cgit v1.2.3 From f06a0f486dc8bbe8808f46b81fbfd73241529fae Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Fri, 23 May 2008 18:13:56 +0200 Subject: rt2x00: Reset antenna RSSI after switch When the antenna configuration has changed we should reset the antenna RSSI value. Otherwise the value will be influenced by the previous configuration quality which in turn will affect the antenna diversity. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00.h | 5 +++++ drivers/net/wireless/rt2x00/rt2x00config.c | 1 + 2 files changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 57bdc153952..611d9832059 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -328,6 +328,11 @@ static inline int rt2x00_get_link_ant_rssi(struct link *link) return DEFAULT_RSSI; } +static inline void rt2x00_reset_link_ant_rssi(struct link *link) +{ + link->ant.rssi_ant = 0; +} + static inline int rt2x00_get_link_ant_rssi_history(struct link *link, enum antenna ant) { diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index a9930a03f45..48608e8cc8b 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -129,6 +129,7 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, */ rt2x00dev->ops->lib->config(rt2x00dev, &libconf, CONFIG_UPDATE_ANTENNA); rt2x00lib_reset_link_tuner(rt2x00dev); + rt2x00_reset_link_ant_rssi(&rt2x00dev->link); rt2x00dev->link.ant.active.rx = libconf.ant.rx; rt2x00dev->link.ant.active.tx = libconf.ant.tx; -- cgit v1.2.3 From 633257d3db547e7553500f05e0aa2692c876d7a5 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Fri, 23 May 2008 18:14:02 +0200 Subject: rt2x00: Use atomic interface iteration in irq context rt2x00lib_beacondone() is called from interrupt context, this means we cannot use the mac80211 interface iterator that uses the rtnl lock (since that uses a mutex which can sleep). Instead we should use the atomic mac80211 interface iterator. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00dev.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index e0767f0cb3d..2673d568bca 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -483,9 +483,9 @@ void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev) if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) return; - ieee80211_iterate_active_interfaces(rt2x00dev->hw, - rt2x00lib_beacondone_iter, - rt2x00dev); + ieee80211_iterate_active_interfaces_atomic(rt2x00dev->hw, + rt2x00lib_beacondone_iter, + rt2x00dev); queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->intf_work); } -- cgit v1.2.3 From 4364623cb79d02945ace7a4faa1f11e617dde198 Mon Sep 17 00:00:00 2001 From: Scott Ashcroft Date: Tue, 27 May 2008 00:06:15 +0300 Subject: rndis_wlan: Make connections to TKIP PSK networks work This patch allows the rndis_wlan driver to connect to TKIP PSK networks. It uses the ASSOCIATION_INFORMATION RNDIS call to pull back the IEs and sends them back to userspace using wireless events. Tested on a few wireless networks I have access to. Based on the similar code in ndiswrapper. Signed-off-by: Scott Ashcroft [edit: cleanups] Signed-off-by: Jussi Kivilinna Signed-off-by: John W. Linville --- drivers/net/wireless/rndis_wlan.c | 60 +++++++++++++++++++++++++++++++++++++-- 1 file changed, 58 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index d0b1fb15c70..ac56f8d9a5e 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -116,6 +116,7 @@ MODULE_PARM_DESC(workaround_interval, #define OID_802_11_ENCRYPTION_STATUS ccpu2(0x0d01011b) #define OID_802_11_ADD_KEY ccpu2(0x0d01011d) #define OID_802_11_REMOVE_KEY ccpu2(0x0d01011e) +#define OID_802_11_ASSOCIATION_INFORMATION ccpu2(0x0d01011f) #define OID_802_11_PMKID ccpu2(0x0d010123) #define OID_802_11_NETWORK_TYPES_SUPPORTED ccpu2(0x0d010203) #define OID_802_11_NETWORK_TYPE_IN_USE ccpu2(0x0d010204) @@ -271,6 +272,26 @@ struct ndis_config_param { __le32 value_length; } __attribute__((packed)); +struct ndis_80211_assoc_info { + __le32 length; + __le16 req_ies; + struct req_ie { + __le16 capa; + __le16 listen_interval; + u8 cur_ap_address[6]; + } req_ie; + __le32 req_ie_length; + __le32 offset_req_ies; + __le16 resp_ies; + struct resp_ie { + __le16 capa; + __le16 status_code; + __le16 assoc_id; + } resp_ie; + __le32 resp_ie_length; + __le32 offset_resp_ies; +} __attribute__((packed)); + /* these have to match what is in wpa_supplicant */ enum wpa_alg { WPA_ALG_NONE, WPA_ALG_WEP, WPA_ALG_TKIP, WPA_ALG_CCMP }; enum wpa_cipher { CIPHER_NONE, CIPHER_WEP40, CIPHER_TKIP, CIPHER_CCMP, @@ -674,6 +695,12 @@ static int get_bssid(struct usbnet *usbdev, u8 bssid[ETH_ALEN]) return ret; } +static int get_association_info(struct usbnet *usbdev, + struct ndis_80211_assoc_info *info, int len) +{ + return rndis_query_oid(usbdev, OID_802_11_ASSOCIATION_INFORMATION, + info, &len); +} static int is_associated(struct usbnet *usbdev) { @@ -2182,11 +2209,40 @@ static void rndis_wext_worker(struct work_struct *work) struct usbnet *usbdev = priv->usbdev; union iwreq_data evt; unsigned char bssid[ETH_ALEN]; - int ret; + struct ndis_80211_assoc_info *info; + int assoc_size = sizeof(*info) + IW_CUSTOM_MAX + 32; + int ret, offset; if (test_and_clear_bit(WORK_CONNECTION_EVENT, &priv->work_pending)) { - ret = get_bssid(usbdev, bssid); + info = kzalloc(assoc_size, GFP_KERNEL); + if (!info) + goto get_bssid; + /* Get association info IEs from device and send them back to + * userspace. */ + ret = get_association_info(usbdev, info, assoc_size); + if (!ret) { + evt.data.length = le32_to_cpu(info->req_ie_length); + if (evt.data.length > 0) { + offset = le32_to_cpu(info->offset_req_ies); + wireless_send_event(usbdev->net, + IWEVASSOCREQIE, &evt, + (char *)info + offset); + } + + evt.data.length = le32_to_cpu(info->resp_ie_length); + if (evt.data.length > 0) { + offset = le32_to_cpu(info->offset_resp_ies); + wireless_send_event(usbdev->net, + IWEVASSOCRESPIE, &evt, + (char *)info + offset); + } + } + + kfree(info); + +get_bssid: + ret = get_bssid(usbdev, bssid); if (!ret) { evt.data.flags = 0; evt.data.length = 0; -- cgit v1.2.3 From 47cfd463962ab0748ecbad761ff6ef2916b54aac Mon Sep 17 00:00:00 2001 From: Guy Cohen Date: Tue, 27 May 2008 11:29:34 +0800 Subject: iwlwifi: fix exit from stay_in_table state When exiting from stay in table state (e.g. timer expiration), all the statistics are reset and the RS flow should not continue but only after enough statistics are collected again. Signed-off-by: Guy Cohen Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-4965-rs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c index c9847b1a67f..02c4073f5a7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c @@ -2009,7 +2009,7 @@ static void rs_rate_scale_perform(struct iwl_priv *priv, * 2) Not just finishing up a search * 3) Allowing a new search */ - if (!update_lq && !done_search && !lq_sta->stay_in_tbl) { + if (!update_lq && !done_search && !lq_sta->stay_in_tbl && window->counter) { /* Save current throughput to compare with "search" throughput*/ lq_sta->last_tpt = current_tpt; -- cgit v1.2.3 From 135a5484c3e0c6710035630b630cef3c856b78e2 Mon Sep 17 00:00:00 2001 From: Guy Cohen Date: Tue, 27 May 2008 11:29:35 +0800 Subject: iwlwifi: fix rate scale TLC column selection bug This patch fixes a case that a wrong maximal rate is selected when searching for better configurations. Signed-off-by: Guy Cohen Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-4965-rs.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c index 02c4073f5a7..3a7f0cb710e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c @@ -1162,7 +1162,6 @@ static s32 rs_get_best_rate(struct iwl_priv *priv, /* Higher rate not available, use the original */ } else { - new_rate = rate; break; } } -- cgit v1.2.3 From a7624837261b55259d4a88309fd88529643fbb80 Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Tue, 27 May 2008 11:15:08 +0300 Subject: rndis_wlan: add missing range check for power_output modparam Range check for power_output were missing. Signed-off-by: Jussi Kivilinna Signed-off-by: John W. Linville --- drivers/net/wireless/rndis_wlan.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index ac56f8d9a5e..18c9931e326 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -2470,6 +2470,11 @@ static int bcm4320_early_init(struct usbnet *dev) else if (priv->param_power_save > 2) priv->param_power_save = 2; + if (priv->param_power_output < 0) + priv->param_power_output = 0; + else if (priv->param_power_output > 3) + priv->param_power_output = 3; + if (priv->param_roamtrigger < -80) priv->param_roamtrigger = -80; else if (priv->param_roamtrigger > -60) -- cgit v1.2.3 From dca026139317dcbc642a30320d551f559692182f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= Date: Thu, 29 May 2008 17:54:52 +0200 Subject: [CPUFREQ] fix double unlock of cpu_policy_rwsem in drivers/cpufreq/cpufreq.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In drivers/cpufreq/cpufreq.c the function cpufreq_add_dev() takes the error exit 'err_out_unregister' from different places once with the 'cpu_policy_rwsem' lock held, once with the lock released: | if (ret) | goto err_out_unregister; | } | | policy->governor = NULL; /* to assure that the starting sequence is | * run in cpufreq_set_policy */ | | /* set default policy */ | ret = __cpufreq_set_policy(policy, &new_policy); | policy->user_policy.policy = policy->policy; | policy->user_policy.governor = policy->governor; | | unlock_policy_rwsem_write(cpu); | | if (ret) { | dprintk("setting policy failed\n"); | goto err_out_unregister; | } This leads to the following error message in case of a failing __cpufreq_set_policy() call: ===================================== [ BUG: bad unlock balance detected! ] ------------------------------------- swapper/1 is trying to release lock (&per_cpu(cpu_policy_rwsem, cpu)) at: [] unlock_policy_rwsem_write+0x30/0x40 but there are no more locks to release! other info that might help us debug this: 1 lock held by swapper/1: #0: (sysdev_drivers_lock){--..}, at: [] sysdev_driver_register+0x74/0x130 stack backtrace: [] (dump_stack+0x0/0x14) from [] (print_unlock_inbalance_bug+0xc8/0x104) [] (print_unlock_inbalance_bug+0x0/0x104) from [] (lock_release_non_nested+0xc4/0x19c) r6:00000028 r5:c3c1ab80 r4:c01b4564 [] (lock_release_non_nested+0x0/0x19c) from [] (lock_release+0x15c/0x18c) r8:60000013 r7:00000001 r6:c01b4564 r5:c0541bb4 r4:c3c1ab80 [] (lock_release+0x0/0x18c) from [] (up_write+0x24/0x30) r8:c0541b80 r7:00000000 r6:ffffffea r5:c3c34828 r4:c0541b8c [] (up_write+0x0/0x30) from [] (unlock_policy_rwsem_write+0x30/0x40) r4:c3c34884 [] (unlock_policy_rwsem_write+0x0/0x40) from [] (cpufreq_add_dev+0x324/0x398) [] (cpufreq_add_dev+0x0/0x398) from [] (sysdev_driver_register+0xc0/0x130) [] (sysdev_driver_register+0x0/0x130) from [] (cpufreq_register_driver+0xbc/0x174) Signed-off-by: Lothar WaĂŸmann Signed-off-by: Dave Jones --- drivers/cpufreq/cpufreq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 7fce038fa57..86f0a243062 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -928,13 +928,13 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) policy->user_policy.policy = policy->policy; policy->user_policy.governor = policy->governor; - unlock_policy_rwsem_write(cpu); - if (ret) { dprintk("setting policy failed\n"); goto err_out_unregister; } + unlock_policy_rwsem_write(cpu); + kobject_uevent(&policy->kobj, KOBJ_ADD); module_put(cpufreq_driver->owner); dprintk("initialization complete\n"); -- cgit v1.2.3 From ebb3770c01a8afd049e3e91b0a026dcdfcb2da9f Mon Sep 17 00:00:00 2001 From: Ray Molenkamp Date: Wed, 21 May 2008 17:06:26 -0600 Subject: USB: FTDI_SIO : Add support for Matrix Orbital PID Range This patch adds support for the range of PIDs that have been allocated for FTDI based devices at Matrix Orbital. A small number of units have been shipped early 2008 with a faulty USB Descriptor. Products that may have this issue have been marked with the existing quirk to work around the problem. Signed-off-by: R. Molenkamp Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 264 ++++++++++++++++++++++++++++++++++++++++- drivers/usb/serial/ftdi_sio.h | 267 +++++++++++++++++++++++++++++++++++++++++- 2 files changed, 525 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 3cee6feac17..5234e7a3bd2 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -174,8 +174,270 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) }, - { USB_DEVICE(MTXORB_VK_VID, MTXORB_VK_PID), + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0100_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0101_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0102_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0103_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0104_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0105_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0106_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0107_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0108_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0109_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010A_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010B_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010C_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010D_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010E_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010F_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0110_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0111_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0112_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0113_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0114_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0115_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0116_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0117_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0118_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0119_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011A_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011B_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011C_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011D_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011E_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011F_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0120_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0121_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0122_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0123_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0124_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0125_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0126_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0127_PID), .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0128_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0129_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012A_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012B_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012C_PID), + .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012D_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012E_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012F_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0130_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0131_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0132_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0133_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0134_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0135_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0136_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0137_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0138_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0139_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013A_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013B_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013C_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013D_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013E_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013F_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0140_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0141_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0142_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0143_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0144_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0145_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0146_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0147_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0148_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0149_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014A_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014B_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014C_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014D_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014E_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014F_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0150_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0151_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0152_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0153_PID), + .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0154_PID), + .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0155_PID), + .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0156_PID), + .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0157_PID), + .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0158_PID), + .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0159_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015A_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015B_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015C_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015D_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015E_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015F_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0160_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0161_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0162_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0163_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0164_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0165_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0166_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0167_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0168_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0169_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016A_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016B_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016C_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016D_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016E_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016F_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0170_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0171_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0172_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0173_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0174_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0175_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0176_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0177_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0178_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0179_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017A_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017B_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017C_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017D_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017E_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017F_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0180_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0181_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0182_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0183_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0184_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0185_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0186_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0187_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0188_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0189_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018A_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018B_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018C_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018D_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018E_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018F_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0190_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0191_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0192_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0193_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0194_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0195_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0196_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0197_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0198_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0199_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019A_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019B_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019C_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019D_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019E_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019F_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A0_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A1_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A2_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A3_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A4_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A5_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A6_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A7_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A8_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A9_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AA_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AB_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AC_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AD_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AE_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AF_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B0_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B1_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B2_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B3_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B4_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B5_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B6_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B7_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B8_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B9_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BA_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BB_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BC_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BD_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BE_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BF_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C0_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C1_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C2_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C3_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C4_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C5_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C6_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C7_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C8_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C9_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CA_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CB_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CC_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CD_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CE_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CF_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D0_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D1_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D2_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D3_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D4_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D5_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D6_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D7_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D8_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D9_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DA_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DB_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DC_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DD_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DE_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DF_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E0_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E1_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E2_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E3_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E4_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E5_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E6_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E7_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E8_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E9_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EA_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EB_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EC_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01ED_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EE_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EF_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F0_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F1_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F2_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F3_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F4_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F5_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F6_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F7_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F8_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F9_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FA_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FB_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FC_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FD_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FE_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FF_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) }, { USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) }, diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index a72f2c81d66..06e0ecabb3e 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -114,11 +114,268 @@ #define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */ /* - * The following are the values for the Matrix Orbital VK204-25-USB - * display, which use the FT232RL. - */ -#define MTXORB_VK_VID 0x1b3d -#define MTXORB_VK_PID 0x0158 + * The following are the values for the Matrix Orbital FTDI Range + * Anything in this range will use an FT232RL. + */ +#define MTXORB_VID 0x1B3D +#define MTXORB_FTDI_RANGE_0100_PID 0x0100 +#define MTXORB_FTDI_RANGE_0101_PID 0x0101 +#define MTXORB_FTDI_RANGE_0102_PID 0x0102 +#define MTXORB_FTDI_RANGE_0103_PID 0x0103 +#define MTXORB_FTDI_RANGE_0104_PID 0x0104 +#define MTXORB_FTDI_RANGE_0105_PID 0x0105 +#define MTXORB_FTDI_RANGE_0106_PID 0x0106 +#define MTXORB_FTDI_RANGE_0107_PID 0x0107 +#define MTXORB_FTDI_RANGE_0108_PID 0x0108 +#define MTXORB_FTDI_RANGE_0109_PID 0x0109 +#define MTXORB_FTDI_RANGE_010A_PID 0x010A +#define MTXORB_FTDI_RANGE_010B_PID 0x010B +#define MTXORB_FTDI_RANGE_010C_PID 0x010C +#define MTXORB_FTDI_RANGE_010D_PID 0x010D +#define MTXORB_FTDI_RANGE_010E_PID 0x010E +#define MTXORB_FTDI_RANGE_010F_PID 0x010F +#define MTXORB_FTDI_RANGE_0110_PID 0x0110 +#define MTXORB_FTDI_RANGE_0111_PID 0x0111 +#define MTXORB_FTDI_RANGE_0112_PID 0x0112 +#define MTXORB_FTDI_RANGE_0113_PID 0x0113 +#define MTXORB_FTDI_RANGE_0114_PID 0x0114 +#define MTXORB_FTDI_RANGE_0115_PID 0x0115 +#define MTXORB_FTDI_RANGE_0116_PID 0x0116 +#define MTXORB_FTDI_RANGE_0117_PID 0x0117 +#define MTXORB_FTDI_RANGE_0118_PID 0x0118 +#define MTXORB_FTDI_RANGE_0119_PID 0x0119 +#define MTXORB_FTDI_RANGE_011A_PID 0x011A +#define MTXORB_FTDI_RANGE_011B_PID 0x011B +#define MTXORB_FTDI_RANGE_011C_PID 0x011C +#define MTXORB_FTDI_RANGE_011D_PID 0x011D +#define MTXORB_FTDI_RANGE_011E_PID 0x011E +#define MTXORB_FTDI_RANGE_011F_PID 0x011F +#define MTXORB_FTDI_RANGE_0120_PID 0x0120 +#define MTXORB_FTDI_RANGE_0121_PID 0x0121 +#define MTXORB_FTDI_RANGE_0122_PID 0x0122 +#define MTXORB_FTDI_RANGE_0123_PID 0x0123 +#define MTXORB_FTDI_RANGE_0124_PID 0x0124 +#define MTXORB_FTDI_RANGE_0125_PID 0x0125 +#define MTXORB_FTDI_RANGE_0126_PID 0x0126 +#define MTXORB_FTDI_RANGE_0127_PID 0x0127 +#define MTXORB_FTDI_RANGE_0128_PID 0x0128 +#define MTXORB_FTDI_RANGE_0129_PID 0x0129 +#define MTXORB_FTDI_RANGE_012A_PID 0x012A +#define MTXORB_FTDI_RANGE_012B_PID 0x012B +#define MTXORB_FTDI_RANGE_012C_PID 0x012C +#define MTXORB_FTDI_RANGE_012D_PID 0x012D +#define MTXORB_FTDI_RANGE_012E_PID 0x012E +#define MTXORB_FTDI_RANGE_012F_PID 0x012F +#define MTXORB_FTDI_RANGE_0130_PID 0x0130 +#define MTXORB_FTDI_RANGE_0131_PID 0x0131 +#define MTXORB_FTDI_RANGE_0132_PID 0x0132 +#define MTXORB_FTDI_RANGE_0133_PID 0x0133 +#define MTXORB_FTDI_RANGE_0134_PID 0x0134 +#define MTXORB_FTDI_RANGE_0135_PID 0x0135 +#define MTXORB_FTDI_RANGE_0136_PID 0x0136 +#define MTXORB_FTDI_RANGE_0137_PID 0x0137 +#define MTXORB_FTDI_RANGE_0138_PID 0x0138 +#define MTXORB_FTDI_RANGE_0139_PID 0x0139 +#define MTXORB_FTDI_RANGE_013A_PID 0x013A +#define MTXORB_FTDI_RANGE_013B_PID 0x013B +#define MTXORB_FTDI_RANGE_013C_PID 0x013C +#define MTXORB_FTDI_RANGE_013D_PID 0x013D +#define MTXORB_FTDI_RANGE_013E_PID 0x013E +#define MTXORB_FTDI_RANGE_013F_PID 0x013F +#define MTXORB_FTDI_RANGE_0140_PID 0x0140 +#define MTXORB_FTDI_RANGE_0141_PID 0x0141 +#define MTXORB_FTDI_RANGE_0142_PID 0x0142 +#define MTXORB_FTDI_RANGE_0143_PID 0x0143 +#define MTXORB_FTDI_RANGE_0144_PID 0x0144 +#define MTXORB_FTDI_RANGE_0145_PID 0x0145 +#define MTXORB_FTDI_RANGE_0146_PID 0x0146 +#define MTXORB_FTDI_RANGE_0147_PID 0x0147 +#define MTXORB_FTDI_RANGE_0148_PID 0x0148 +#define MTXORB_FTDI_RANGE_0149_PID 0x0149 +#define MTXORB_FTDI_RANGE_014A_PID 0x014A +#define MTXORB_FTDI_RANGE_014B_PID 0x014B +#define MTXORB_FTDI_RANGE_014C_PID 0x014C +#define MTXORB_FTDI_RANGE_014D_PID 0x014D +#define MTXORB_FTDI_RANGE_014E_PID 0x014E +#define MTXORB_FTDI_RANGE_014F_PID 0x014F +#define MTXORB_FTDI_RANGE_0150_PID 0x0150 +#define MTXORB_FTDI_RANGE_0151_PID 0x0151 +#define MTXORB_FTDI_RANGE_0152_PID 0x0152 +#define MTXORB_FTDI_RANGE_0153_PID 0x0153 +#define MTXORB_FTDI_RANGE_0154_PID 0x0154 +#define MTXORB_FTDI_RANGE_0155_PID 0x0155 +#define MTXORB_FTDI_RANGE_0156_PID 0x0156 +#define MTXORB_FTDI_RANGE_0157_PID 0x0157 +#define MTXORB_FTDI_RANGE_0158_PID 0x0158 +#define MTXORB_FTDI_RANGE_0159_PID 0x0159 +#define MTXORB_FTDI_RANGE_015A_PID 0x015A +#define MTXORB_FTDI_RANGE_015B_PID 0x015B +#define MTXORB_FTDI_RANGE_015C_PID 0x015C +#define MTXORB_FTDI_RANGE_015D_PID 0x015D +#define MTXORB_FTDI_RANGE_015E_PID 0x015E +#define MTXORB_FTDI_RANGE_015F_PID 0x015F +#define MTXORB_FTDI_RANGE_0160_PID 0x0160 +#define MTXORB_FTDI_RANGE_0161_PID 0x0161 +#define MTXORB_FTDI_RANGE_0162_PID 0x0162 +#define MTXORB_FTDI_RANGE_0163_PID 0x0163 +#define MTXORB_FTDI_RANGE_0164_PID 0x0164 +#define MTXORB_FTDI_RANGE_0165_PID 0x0165 +#define MTXORB_FTDI_RANGE_0166_PID 0x0166 +#define MTXORB_FTDI_RANGE_0167_PID 0x0167 +#define MTXORB_FTDI_RANGE_0168_PID 0x0168 +#define MTXORB_FTDI_RANGE_0169_PID 0x0169 +#define MTXORB_FTDI_RANGE_016A_PID 0x016A +#define MTXORB_FTDI_RANGE_016B_PID 0x016B +#define MTXORB_FTDI_RANGE_016C_PID 0x016C +#define MTXORB_FTDI_RANGE_016D_PID 0x016D +#define MTXORB_FTDI_RANGE_016E_PID 0x016E +#define MTXORB_FTDI_RANGE_016F_PID 0x016F +#define MTXORB_FTDI_RANGE_0170_PID 0x0170 +#define MTXORB_FTDI_RANGE_0171_PID 0x0171 +#define MTXORB_FTDI_RANGE_0172_PID 0x0172 +#define MTXORB_FTDI_RANGE_0173_PID 0x0173 +#define MTXORB_FTDI_RANGE_0174_PID 0x0174 +#define MTXORB_FTDI_RANGE_0175_PID 0x0175 +#define MTXORB_FTDI_RANGE_0176_PID 0x0176 +#define MTXORB_FTDI_RANGE_0177_PID 0x0177 +#define MTXORB_FTDI_RANGE_0178_PID 0x0178 +#define MTXORB_FTDI_RANGE_0179_PID 0x0179 +#define MTXORB_FTDI_RANGE_017A_PID 0x017A +#define MTXORB_FTDI_RANGE_017B_PID 0x017B +#define MTXORB_FTDI_RANGE_017C_PID 0x017C +#define MTXORB_FTDI_RANGE_017D_PID 0x017D +#define MTXORB_FTDI_RANGE_017E_PID 0x017E +#define MTXORB_FTDI_RANGE_017F_PID 0x017F +#define MTXORB_FTDI_RANGE_0180_PID 0x0180 +#define MTXORB_FTDI_RANGE_0181_PID 0x0181 +#define MTXORB_FTDI_RANGE_0182_PID 0x0182 +#define MTXORB_FTDI_RANGE_0183_PID 0x0183 +#define MTXORB_FTDI_RANGE_0184_PID 0x0184 +#define MTXORB_FTDI_RANGE_0185_PID 0x0185 +#define MTXORB_FTDI_RANGE_0186_PID 0x0186 +#define MTXORB_FTDI_RANGE_0187_PID 0x0187 +#define MTXORB_FTDI_RANGE_0188_PID 0x0188 +#define MTXORB_FTDI_RANGE_0189_PID 0x0189 +#define MTXORB_FTDI_RANGE_018A_PID 0x018A +#define MTXORB_FTDI_RANGE_018B_PID 0x018B +#define MTXORB_FTDI_RANGE_018C_PID 0x018C +#define MTXORB_FTDI_RANGE_018D_PID 0x018D +#define MTXORB_FTDI_RANGE_018E_PID 0x018E +#define MTXORB_FTDI_RANGE_018F_PID 0x018F +#define MTXORB_FTDI_RANGE_0190_PID 0x0190 +#define MTXORB_FTDI_RANGE_0191_PID 0x0191 +#define MTXORB_FTDI_RANGE_0192_PID 0x0192 +#define MTXORB_FTDI_RANGE_0193_PID 0x0193 +#define MTXORB_FTDI_RANGE_0194_PID 0x0194 +#define MTXORB_FTDI_RANGE_0195_PID 0x0195 +#define MTXORB_FTDI_RANGE_0196_PID 0x0196 +#define MTXORB_FTDI_RANGE_0197_PID 0x0197 +#define MTXORB_FTDI_RANGE_0198_PID 0x0198 +#define MTXORB_FTDI_RANGE_0199_PID 0x0199 +#define MTXORB_FTDI_RANGE_019A_PID 0x019A +#define MTXORB_FTDI_RANGE_019B_PID 0x019B +#define MTXORB_FTDI_RANGE_019C_PID 0x019C +#define MTXORB_FTDI_RANGE_019D_PID 0x019D +#define MTXORB_FTDI_RANGE_019E_PID 0x019E +#define MTXORB_FTDI_RANGE_019F_PID 0x019F +#define MTXORB_FTDI_RANGE_01A0_PID 0x01A0 +#define MTXORB_FTDI_RANGE_01A1_PID 0x01A1 +#define MTXORB_FTDI_RANGE_01A2_PID 0x01A2 +#define MTXORB_FTDI_RANGE_01A3_PID 0x01A3 +#define MTXORB_FTDI_RANGE_01A4_PID 0x01A4 +#define MTXORB_FTDI_RANGE_01A5_PID 0x01A5 +#define MTXORB_FTDI_RANGE_01A6_PID 0x01A6 +#define MTXORB_FTDI_RANGE_01A7_PID 0x01A7 +#define MTXORB_FTDI_RANGE_01A8_PID 0x01A8 +#define MTXORB_FTDI_RANGE_01A9_PID 0x01A9 +#define MTXORB_FTDI_RANGE_01AA_PID 0x01AA +#define MTXORB_FTDI_RANGE_01AB_PID 0x01AB +#define MTXORB_FTDI_RANGE_01AC_PID 0x01AC +#define MTXORB_FTDI_RANGE_01AD_PID 0x01AD +#define MTXORB_FTDI_RANGE_01AE_PID 0x01AE +#define MTXORB_FTDI_RANGE_01AF_PID 0x01AF +#define MTXORB_FTDI_RANGE_01B0_PID 0x01B0 +#define MTXORB_FTDI_RANGE_01B1_PID 0x01B1 +#define MTXORB_FTDI_RANGE_01B2_PID 0x01B2 +#define MTXORB_FTDI_RANGE_01B3_PID 0x01B3 +#define MTXORB_FTDI_RANGE_01B4_PID 0x01B4 +#define MTXORB_FTDI_RANGE_01B5_PID 0x01B5 +#define MTXORB_FTDI_RANGE_01B6_PID 0x01B6 +#define MTXORB_FTDI_RANGE_01B7_PID 0x01B7 +#define MTXORB_FTDI_RANGE_01B8_PID 0x01B8 +#define MTXORB_FTDI_RANGE_01B9_PID 0x01B9 +#define MTXORB_FTDI_RANGE_01BA_PID 0x01BA +#define MTXORB_FTDI_RANGE_01BB_PID 0x01BB +#define MTXORB_FTDI_RANGE_01BC_PID 0x01BC +#define MTXORB_FTDI_RANGE_01BD_PID 0x01BD +#define MTXORB_FTDI_RANGE_01BE_PID 0x01BE +#define MTXORB_FTDI_RANGE_01BF_PID 0x01BF +#define MTXORB_FTDI_RANGE_01C0_PID 0x01C0 +#define MTXORB_FTDI_RANGE_01C1_PID 0x01C1 +#define MTXORB_FTDI_RANGE_01C2_PID 0x01C2 +#define MTXORB_FTDI_RANGE_01C3_PID 0x01C3 +#define MTXORB_FTDI_RANGE_01C4_PID 0x01C4 +#define MTXORB_FTDI_RANGE_01C5_PID 0x01C5 +#define MTXORB_FTDI_RANGE_01C6_PID 0x01C6 +#define MTXORB_FTDI_RANGE_01C7_PID 0x01C7 +#define MTXORB_FTDI_RANGE_01C8_PID 0x01C8 +#define MTXORB_FTDI_RANGE_01C9_PID 0x01C9 +#define MTXORB_FTDI_RANGE_01CA_PID 0x01CA +#define MTXORB_FTDI_RANGE_01CB_PID 0x01CB +#define MTXORB_FTDI_RANGE_01CC_PID 0x01CC +#define MTXORB_FTDI_RANGE_01CD_PID 0x01CD +#define MTXORB_FTDI_RANGE_01CE_PID 0x01CE +#define MTXORB_FTDI_RANGE_01CF_PID 0x01CF +#define MTXORB_FTDI_RANGE_01D0_PID 0x01D0 +#define MTXORB_FTDI_RANGE_01D1_PID 0x01D1 +#define MTXORB_FTDI_RANGE_01D2_PID 0x01D2 +#define MTXORB_FTDI_RANGE_01D3_PID 0x01D3 +#define MTXORB_FTDI_RANGE_01D4_PID 0x01D4 +#define MTXORB_FTDI_RANGE_01D5_PID 0x01D5 +#define MTXORB_FTDI_RANGE_01D6_PID 0x01D6 +#define MTXORB_FTDI_RANGE_01D7_PID 0x01D7 +#define MTXORB_FTDI_RANGE_01D8_PID 0x01D8 +#define MTXORB_FTDI_RANGE_01D9_PID 0x01D9 +#define MTXORB_FTDI_RANGE_01DA_PID 0x01DA +#define MTXORB_FTDI_RANGE_01DB_PID 0x01DB +#define MTXORB_FTDI_RANGE_01DC_PID 0x01DC +#define MTXORB_FTDI_RANGE_01DD_PID 0x01DD +#define MTXORB_FTDI_RANGE_01DE_PID 0x01DE +#define MTXORB_FTDI_RANGE_01DF_PID 0x01DF +#define MTXORB_FTDI_RANGE_01E0_PID 0x01E0 +#define MTXORB_FTDI_RANGE_01E1_PID 0x01E1 +#define MTXORB_FTDI_RANGE_01E2_PID 0x01E2 +#define MTXORB_FTDI_RANGE_01E3_PID 0x01E3 +#define MTXORB_FTDI_RANGE_01E4_PID 0x01E4 +#define MTXORB_FTDI_RANGE_01E5_PID 0x01E5 +#define MTXORB_FTDI_RANGE_01E6_PID 0x01E6 +#define MTXORB_FTDI_RANGE_01E7_PID 0x01E7 +#define MTXORB_FTDI_RANGE_01E8_PID 0x01E8 +#define MTXORB_FTDI_RANGE_01E9_PID 0x01E9 +#define MTXORB_FTDI_RANGE_01EA_PID 0x01EA +#define MTXORB_FTDI_RANGE_01EB_PID 0x01EB +#define MTXORB_FTDI_RANGE_01EC_PID 0x01EC +#define MTXORB_FTDI_RANGE_01ED_PID 0x01ED +#define MTXORB_FTDI_RANGE_01EE_PID 0x01EE +#define MTXORB_FTDI_RANGE_01EF_PID 0x01EF +#define MTXORB_FTDI_RANGE_01F0_PID 0x01F0 +#define MTXORB_FTDI_RANGE_01F1_PID 0x01F1 +#define MTXORB_FTDI_RANGE_01F2_PID 0x01F2 +#define MTXORB_FTDI_RANGE_01F3_PID 0x01F3 +#define MTXORB_FTDI_RANGE_01F4_PID 0x01F4 +#define MTXORB_FTDI_RANGE_01F5_PID 0x01F5 +#define MTXORB_FTDI_RANGE_01F6_PID 0x01F6 +#define MTXORB_FTDI_RANGE_01F7_PID 0x01F7 +#define MTXORB_FTDI_RANGE_01F8_PID 0x01F8 +#define MTXORB_FTDI_RANGE_01F9_PID 0x01F9 +#define MTXORB_FTDI_RANGE_01FA_PID 0x01FA +#define MTXORB_FTDI_RANGE_01FB_PID 0x01FB +#define MTXORB_FTDI_RANGE_01FC_PID 0x01FC +#define MTXORB_FTDI_RANGE_01FD_PID 0x01FD +#define MTXORB_FTDI_RANGE_01FE_PID 0x01FE +#define MTXORB_FTDI_RANGE_01FF_PID 0x01FF + + /* Interbiometrics USB I/O Board */ /* Developed for Interbiometrics by Rudolf Gugler */ -- cgit v1.2.3 From 62d104d0deeabd4148e49eba729d963e740e205f Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Tue, 20 May 2008 20:06:28 +0100 Subject: USB: Firmware loader driver for USB Apple iSight camera Uninitialised Apple iSight drivers present with a distinctive USB ID. Once firmware has been uploaded, they disconnect and reconnect with a new ID. At this point they can be driven by the uvcvideo driver. As this is unique to the Apple cameras and not functionality shared by any other UVC devices, it makes sense to provide the firmware loading functionality in a separate driver. This driver will read an isight.fw file extracted from the Apple driver using the tools at http://bersace03.free.fr/ift/ and upload it to the camera. It will also handle the case where the device loses its firmware during hibernation and must have it reloaded. Signed-off-by: Matthew Garrett Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/Kconfig | 11 ++++ drivers/usb/misc/Makefile | 1 + drivers/usb/misc/isight_firmware.c | 131 +++++++++++++++++++++++++++++++++++++ 3 files changed, 143 insertions(+) create mode 100644 drivers/usb/misc/isight_firmware.c (limited to 'drivers') diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index a53db1d4e07..eb6c06979f3 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -269,3 +269,14 @@ config USB_TEST See for more information, including sample test device firmware and "how to use it". +config USB_ISIGHTFW + tristate "iSight firmware loading support" + depends on USB + help + This driver loads firmware for USB Apple iSight cameras, allowing + them to be driven by the USB video class driver available at + http://linux-uvc.berlios.de + + The firmware for this driver must be extracted from the MacOS + driver beforehand. Tools for doing so are available at + http://bersace03.free.fr diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile index b68e6b774f1..aba091cb5ec 100644 --- a/drivers/usb/misc/Makefile +++ b/drivers/usb/misc/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_USB_EMI62) += emi62.o obj-$(CONFIG_USB_FTDI_ELAN) += ftdi-elan.o obj-$(CONFIG_USB_IDMOUSE) += idmouse.o obj-$(CONFIG_USB_IOWARRIOR) += iowarrior.o +obj-$(CONFIG_USB_ISIGHTFW) += isight_firmware.o obj-$(CONFIG_USB_LCD) += usblcd.o obj-$(CONFIG_USB_LD) += ldusb.o obj-$(CONFIG_USB_LED) += usbled.o diff --git a/drivers/usb/misc/isight_firmware.c b/drivers/usb/misc/isight_firmware.c new file mode 100644 index 00000000000..390e0488553 --- /dev/null +++ b/drivers/usb/misc/isight_firmware.c @@ -0,0 +1,131 @@ +/* + * Driver for loading USB isight firmware + * + * Copyright (C) 2008 Matthew Garrett + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * The USB isight cameras in recent Apples are roughly compatible with the USB + * video class specification, and can be driven by uvcvideo. However, they + * need firmware to be loaded beforehand. After firmware loading, the device + * detaches from the USB bus and reattaches with a new device ID. It can then + * be claimed by the uvc driver. + * + * The firmware is non-free and must be extracted by the user. Tools to do this + * are available at http://bersace03.free.fr/ift/ + * + * The isight firmware loading was reverse engineered by Johannes Berg + * , and this driver is based on code by Ronald + * Bultje + */ + +#include +#include +#include +#include + +static struct usb_device_id id_table[] = { + {USB_DEVICE(0x05ac, 0x8300)}, + {}, +}; + +MODULE_DEVICE_TABLE(usb, id_table); + +static int isight_firmware_load(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *dev = interface_to_usbdev(intf); + int llen, len, req, ret = 0; + const struct firmware *firmware; + unsigned char *buf; + unsigned char data[4]; + char *ptr; + + if (request_firmware(&firmware, "isight.fw", &dev->dev) != 0) { + printk(KERN_ERR "Unable to load isight firmware\n"); + return -ENODEV; + } + + ptr = firmware->data; + + if (usb_control_msg + (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, "\1", 1, + 300) != 1) { + printk(KERN_ERR + "Failed to initialise isight firmware loader\n"); + ret = -ENODEV; + goto out; + } + + while (1) { + memcpy(data, ptr, 4); + len = (data[0] << 8 | data[1]); + req = (data[2] << 8 | data[3]); + ptr += 4; + + if (len == 0x8001) + break; /* success */ + else if (len == 0) + continue; + + for (; len > 0; req += 50) { + llen = len > 50 ? 50 : len; + len -= llen; + + buf = kmalloc(llen, GFP_KERNEL); + memcpy(buf, ptr, llen); + + ptr += llen; + + if (usb_control_msg + (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, req, 0, + buf, llen, 300) != llen) { + printk(KERN_ERR + "Failed to load isight firmware\n"); + kfree(buf); + ret = -ENODEV; + goto out; + } + + kfree(buf); + } + } + if (usb_control_msg + (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, "\0", 1, + 300) != 1) { + printk(KERN_ERR "isight firmware loading completion failed\n"); + ret = -ENODEV; + } +out: + release_firmware(firmware); + return ret; +} + +static void isight_firmware_disconnect(struct usb_interface *intf) +{ +} + +static struct usb_driver isight_firmware_driver = { + .name = "isight_firmware", + .probe = isight_firmware_load, + .disconnect = isight_firmware_disconnect, + .id_table = id_table, +}; + +static int __init isight_firmware_init(void) +{ + return usb_register(&isight_firmware_driver); +} + +static void __exit isight_firmware_exit(void) +{ + usb_deregister(&isight_firmware_driver); +} + +module_init(isight_firmware_init); +module_exit(isight_firmware_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Matthew Garrett "); -- cgit v1.2.3 From e16362a0c8d90e9adbfe477acbe32b021823fb22 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 20 May 2008 16:37:34 -0400 Subject: USB: fix possible deadlock involving sysfs attributes There is a potential deadlock when the usb_generic driver is unbound from a device. The problem is that generic_disconnect() is called with the device lock held, and it removes a bunch of device attributes from sysfs. If a user task happens to be running an attribute method at the time, the removal will block until the method returns. But at least one of the attribute methods (the store routine for power/level) needs to acquire the device lock! This patch (as1093) eliminates the deadlock by moving the calls to create and remove the sysfs attributes from the usb_generic driver into usb_new_device() and usb_disconnect(), where they can be invoked without holding the device lock. Besides, the other sysfs attributes are created when the device is registered and removed when the device is unregistered. So it seems only fitting for the extra attributes to be created and removed at the same time. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/generic.c | 5 ----- drivers/usb/core/hub.c | 9 +++++++++ 2 files changed, 9 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c index c1cb94e9f24..7e912f21fd3 100644 --- a/drivers/usb/core/generic.c +++ b/drivers/usb/core/generic.c @@ -155,9 +155,6 @@ static int generic_probe(struct usb_device *udev) { int err, c; - /* put device-specific files into sysfs */ - usb_create_sysfs_dev_files(udev); - /* Choose and set the configuration. This registers the interfaces * with the driver core and lets interface drivers bind to them. */ @@ -189,8 +186,6 @@ static void generic_disconnect(struct usb_device *udev) * unconfigure the device */ if (udev->actconfig) usb_set_configuration(udev, -1); - - usb_remove_sysfs_dev_files(udev); } #ifdef CONFIG_PM diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index eb57fcc701d..1a3d2879bc1 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1326,6 +1326,12 @@ void usb_disconnect(struct usb_device **pdev) usb_unlock_device(udev); + /* Remove the device-specific files from sysfs. This must be + * done with udev unlocked, because some of the attribute + * routines try to acquire the device lock. + */ + usb_remove_sysfs_dev_files(udev); + /* Unregister the device. The device driver is responsible * for removing the device files from usbfs and sysfs and for * de-configuring the device. @@ -1541,6 +1547,9 @@ int usb_new_device(struct usb_device *udev) goto fail; } + /* put device-specific files into sysfs */ + usb_create_sysfs_dev_files(udev); + /* Tell the world! */ announce_device(udev); return err; -- cgit v1.2.3 From 217a9081d8e69026186067711131b77f0ce219ed Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 20 May 2008 16:40:42 -0400 Subject: USB: add all configs to the "descriptors" attribute This patch (as1094) changes the output of the "descriptors" binary attribute. Now it will contain the device descriptor followed by all the configuration descriptors, not just the descriptor for the current config. Userspace libraries want to have access to the kernel's cached descriptor information, so they can learn about device characteristics without having to wake up suspended devices. So far the only user of this attribute is the new libusb-1.0 library; thus changing its contents shouldn't cause any problems. This should be considered for 2.6.26, if for no other reason than to minimize the range of releases in which the attribute contains only the current config descriptor. Also, it doesn't hurt that the patch removes the device locking -- which was formerly needed in order to know for certain which config was indeed current. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/sysfs.c | 44 +++++++++++++++++++++----------------------- 1 file changed, 21 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index c783cb11184..5e1f5d55bf0 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -588,35 +588,33 @@ read_descriptors(struct kobject *kobj, struct bin_attribute *attr, container_of(kobj, struct device, kobj)); size_t nleft = count; size_t srclen, n; + int cfgno; + void *src; - usb_lock_device(udev); - - /* The binary attribute begins with the device descriptor */ - srclen = sizeof(struct usb_device_descriptor); - if (off < srclen) { - n = min_t(size_t, nleft, srclen - off); - memcpy(buf, off + (char *) &udev->descriptor, n); - nleft -= n; - buf += n; - off = 0; - } else { - off -= srclen; - } - - /* Then follows the raw descriptor entry for the current - * configuration (config plus subsidiary descriptors). + /* The binary attribute begins with the device descriptor. + * Following that are the raw descriptor entries for all the + * configurations (config plus subsidiary descriptors). */ - if (udev->actconfig) { - int cfgno = udev->actconfig - udev->config; - - srclen = __le16_to_cpu(udev->actconfig->desc.wTotalLength); + for (cfgno = -1; cfgno < udev->descriptor.bNumConfigurations && + nleft > 0; ++cfgno) { + if (cfgno < 0) { + src = &udev->descriptor; + srclen = sizeof(struct usb_device_descriptor); + } else { + src = udev->rawdescriptors[cfgno]; + srclen = __le16_to_cpu(udev->config[cfgno].desc. + wTotalLength); + } if (off < srclen) { - n = min_t(size_t, nleft, srclen - off); - memcpy(buf, off + udev->rawdescriptors[cfgno], n); + n = min(nleft, srclen - (size_t) off); + memcpy(buf, src + off, n); nleft -= n; + buf += n; + off = 0; + } else { + off -= srclen; } } - usb_unlock_device(udev); return count - nleft; } -- cgit v1.2.3 From a8e5177583e975fc1f7c621c93956f494df9b979 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 20 May 2008 16:58:11 -0400 Subject: USB: EHCI: fix up root-hub TT mess This patch (as1095) cleans up the HCD glue and several of the EHCI bus-glue files. The ehci->is_tdi_rh_tt flag is redundant, since it means the same thing as the hcd->has_tt flag, so it is removed and the other flag used in its place. Some of the bus-glue files didn't get the relinquish_port method added to their hc_driver structures. Although that routine currently doesn't do anything for controllers with an integrated TT, in the future it might. So the patch adds it where it is missing. Lastly, some of the bus-glue files have erroneous entries for their hc_driver's suspend and resume methods. These method pointers are specific to PCI and shouldn't be used otherwise. (The patch also includes an invisible whitespace fix.) Signed-off-by: Alan Stern Acked-by: David Brownell --- drivers/usb/host/ehci-fsl.c | 6 +----- drivers/usb/host/ehci-ixp4xx.c | 3 ++- drivers/usb/host/ehci-orion.c | 7 ++----- drivers/usb/host/ehci-pci.c | 3 +-- drivers/usb/host/ehci-ppc-of.c | 1 + drivers/usb/host/ehci.h | 3 +-- 6 files changed, 8 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 6d9bed6c1f4..4843062e6e2 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -269,7 +269,7 @@ static int ehci_fsl_setup(struct usb_hcd *hcd) if (retval) return retval; - ehci->is_tdi_rh_tt = 1; + hcd->has_tt = 1; ehci->sbrn = 0x20; @@ -295,10 +295,6 @@ static const struct hc_driver ehci_fsl_hc_driver = { */ .reset = ehci_fsl_setup, .start = ehci_run, -#ifdef CONFIG_PM - .suspend = ehci_bus_suspend, - .resume = ehci_bus_resume, -#endif .stop = ehci_stop, .shutdown = ehci_shutdown, diff --git a/drivers/usb/host/ehci-ixp4xx.c b/drivers/usb/host/ehci-ixp4xx.c index 601c8795a85..539257f1592 100644 --- a/drivers/usb/host/ehci-ixp4xx.c +++ b/drivers/usb/host/ehci-ixp4xx.c @@ -26,7 +26,7 @@ static int ixp4xx_ehci_init(struct usb_hcd *hcd) + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); - ehci->is_tdi_rh_tt = 1; + hcd->has_tt = 1; ehci_reset(ehci); retval = ehci_init(hcd); @@ -58,6 +58,7 @@ static const struct hc_driver ixp4xx_ehci_hc_driver = { .bus_suspend = ehci_bus_suspend, .bus_resume = ehci_bus_resume, #endif + .relinquish_port = ehci_relinquish_port, }; static int ixp4xx_ehci_probe(struct platform_device *pdev) diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 3adfda813a7..9c5266d02d6 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -139,10 +139,6 @@ static const struct hc_driver ehci_orion_hc_driver = { */ .reset = ehci_orion_setup, .start = ehci_run, -#ifdef CONFIG_PM - .suspend = ehci_bus_suspend, - .resume = ehci_bus_resume, -#endif .stop = ehci_stop, .shutdown = ehci_shutdown, @@ -165,6 +161,7 @@ static const struct hc_driver ehci_orion_hc_driver = { .hub_control = ehci_hub_control, .bus_suspend = ehci_bus_suspend, .bus_resume = ehci_bus_resume, + .relinquish_port = ehci_relinquish_port, }; static void __init @@ -250,7 +247,7 @@ static int __init ehci_orion_drv_probe(struct platform_device *pdev) ehci->regs = hcd->regs + 0x100 + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); - ehci->is_tdi_rh_tt = 1; + hcd->has_tt = 1; ehci->sbrn = 0x20; /* diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 5bb7f6bb13f..6ff453f935e 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -129,7 +129,6 @@ static int ehci_pci_setup(struct usb_hcd *hcd) switch (pdev->vendor) { case PCI_VENDOR_ID_TDI: if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) { - ehci->is_tdi_rh_tt = 1; hcd->has_tt = 1; tdi_reset(ehci); } @@ -379,7 +378,7 @@ static const struct hc_driver ehci_pci_hc_driver = { .hub_control = ehci_hub_control, .bus_suspend = ehci_bus_suspend, .bus_resume = ehci_bus_resume, - .relinquish_port = ehci_relinquish_port, + .relinquish_port = ehci_relinquish_port, }; /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c index ee305b1f99f..d94a2ef4944 100644 --- a/drivers/usb/host/ehci-ppc-of.c +++ b/drivers/usb/host/ehci-ppc-of.c @@ -76,6 +76,7 @@ static const struct hc_driver ehci_ppc_of_hc_driver = { .bus_suspend = ehci_bus_suspend, .bus_resume = ehci_bus_resume, #endif + .relinquish_port = ehci_relinquish_port, }; diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index bf92d209a1a..3cb48230834 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -112,7 +112,6 @@ struct ehci_hcd { /* one per controller */ u32 command; /* SILICON QUIRKS */ - unsigned is_tdi_rh_tt:1; /* TDI roothub with TT */ unsigned no_selective_suspend:1; unsigned has_fsl_port_bug:1; /* FreeScale */ unsigned big_endian_mmio:1; @@ -678,7 +677,7 @@ struct ehci_fstn { * needed (mostly in root hub code). */ -#define ehci_is_TDI(e) ((e)->is_tdi_rh_tt) +#define ehci_is_TDI(e) (ehci_to_hcd(e)->has_tt) /* Returns the speed of a device attached to a port on the root hub. */ static inline unsigned int -- cgit v1.2.3 From 3a31155cfff0935e4b178f3dca733d2d60d2eb8d Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 20 May 2008 16:58:29 -0400 Subject: USB: EHCI: suppress unwanted error messages This patch (as1096) fixes an annoying problem: When a full-speed or low-speed device is plugged into an EHCI controller, it fails to enumerate at high speed and then is handed over to the companion controller. But usbcore logs a misleading and unwanted error message when the high-speed enumeration fails. The patch adds a new HCD method, port_handed_over, which asks whether a port has been handed over to a companion controller. If it has, the error message is suppressed. Signed-off-by: Alan Stern CC: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.h | 2 ++ drivers/usb/core/hub.c | 6 +++++- drivers/usb/host/ehci-au1xxx.c | 1 + drivers/usb/host/ehci-fsl.c | 1 + drivers/usb/host/ehci-hub.c | 10 ++++++++++ drivers/usb/host/ehci-ixp4xx.c | 1 + drivers/usb/host/ehci-orion.c | 1 + drivers/usb/host/ehci-pci.c | 1 + drivers/usb/host/ehci-ppc-of.c | 1 + drivers/usb/host/ehci-ppc-soc.c | 1 + drivers/usb/host/ehci-ps3.c | 1 + 11 files changed, 25 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index 1e4b81e9eb5..a0bf5df6cb6 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -213,6 +213,8 @@ struct hc_driver { /* force handover of high-speed port to full-speed companion */ void (*relinquish_port)(struct usb_hcd *, int); + /* has a port been handed over to a companion? */ + int (*port_handed_over)(struct usb_hcd *, int); }; extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 1a3d2879bc1..8eb4da332f5 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2753,7 +2753,11 @@ loop: if ((status == -ENOTCONN) || (status == -ENOTSUPP)) break; } - dev_err(hub_dev, "unable to enumerate USB device on port %d\n", port1); + if (hub->hdev->parent || + !hcd->driver->port_handed_over || + !(hcd->driver->port_handed_over)(hcd, port1)) + dev_err(hub_dev, "unable to enumerate USB device on port %d\n", + port1); done: hub_port_disable(hub, port1, 1); diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c index 8b5f991e949..08a4335401a 100644 --- a/drivers/usb/host/ehci-au1xxx.c +++ b/drivers/usb/host/ehci-au1xxx.c @@ -223,6 +223,7 @@ static const struct hc_driver ehci_au1xxx_hc_driver = { .bus_suspend = ehci_bus_suspend, .bus_resume = ehci_bus_resume, .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, }; /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 4843062e6e2..7370d6187c6 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -318,6 +318,7 @@ static const struct hc_driver ehci_fsl_hc_driver = { .bus_suspend = ehci_bus_suspend, .bus_resume = ehci_bus_resume, .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, }; static int ehci_fsl_drv_probe(struct platform_device *pdev) diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 382587c4457..d613dc9e9c0 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -875,3 +875,13 @@ static void ehci_relinquish_port(struct usb_hcd *hcd, int portnum) set_owner(ehci, --portnum, PORT_OWNER); } +static int ehci_port_handed_over(struct usb_hcd *hcd, int portnum) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + u32 __iomem *reg; + + if (ehci_is_TDI(ehci)) + return 0; + reg = &ehci->regs->port_status[portnum - 1]; + return ehci_readl(ehci, reg) & PORT_OWNER; +} diff --git a/drivers/usb/host/ehci-ixp4xx.c b/drivers/usb/host/ehci-ixp4xx.c index 539257f1592..9d042f22009 100644 --- a/drivers/usb/host/ehci-ixp4xx.c +++ b/drivers/usb/host/ehci-ixp4xx.c @@ -59,6 +59,7 @@ static const struct hc_driver ixp4xx_ehci_hc_driver = { .bus_resume = ehci_bus_resume, #endif .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, }; static int ixp4xx_ehci_probe(struct platform_device *pdev) diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 9c5266d02d6..ab625f0ba1d 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -162,6 +162,7 @@ static const struct hc_driver ehci_orion_hc_driver = { .bus_suspend = ehci_bus_suspend, .bus_resume = ehci_bus_resume, .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, }; static void __init diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 6ff453f935e..c46a58f9181 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -379,6 +379,7 @@ static const struct hc_driver ehci_pci_hc_driver = { .bus_suspend = ehci_bus_suspend, .bus_resume = ehci_bus_resume, .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, }; /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c index d94a2ef4944..b018deed2e8 100644 --- a/drivers/usb/host/ehci-ppc-of.c +++ b/drivers/usb/host/ehci-ppc-of.c @@ -77,6 +77,7 @@ static const struct hc_driver ehci_ppc_of_hc_driver = { .bus_resume = ehci_bus_resume, #endif .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, }; diff --git a/drivers/usb/host/ehci-ppc-soc.c b/drivers/usb/host/ehci-ppc-soc.c index 6c76036783a..529590eb403 100644 --- a/drivers/usb/host/ehci-ppc-soc.c +++ b/drivers/usb/host/ehci-ppc-soc.c @@ -163,6 +163,7 @@ static const struct hc_driver ehci_ppc_soc_hc_driver = { .bus_suspend = ehci_bus_suspend, .bus_resume = ehci_bus_resume, .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, }; static int ehci_hcd_ppc_soc_drv_probe(struct platform_device *pdev) diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c index 69782221bcf..37e6abeb794 100644 --- a/drivers/usb/host/ehci-ps3.c +++ b/drivers/usb/host/ehci-ps3.c @@ -73,6 +73,7 @@ static const struct hc_driver ps3_ehci_hc_driver = { .bus_resume = ehci_bus_resume, #endif .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, }; static int ps3_ehci_probe(struct ps3_system_bus_device *dev) -- cgit v1.2.3 From d1f114d12bb4db3147e1b1342ae31083c5a79c84 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 20 May 2008 16:58:58 -0400 Subject: USB: EHCI: fix remote-wakeup regression This patch (as1097) fixes a bug in the remote-wakeup handling in ehci-hcd. The driver currently does not keep track of whether the change-suspend feature is enabled for each port; the feature is automatically reset the first time it is read. But recent changes to the hub driver require that the feature be read at least twice in order to work properly. A bit-vector is added for storing the change-suspend feature values. Signed-off-by: Alan Stern Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hub.c | 6 ++++-- drivers/usb/host/ehci.h | 2 ++ 2 files changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index d613dc9e9c0..740835bb857 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -609,7 +609,7 @@ static int ehci_hub_control ( } break; case USB_PORT_FEAT_C_SUSPEND: - /* we auto-clear this feature */ + clear_bit(wIndex, &ehci->port_c_suspend); break; case USB_PORT_FEAT_POWER: if (HCS_PPC (ehci->hcs_params)) @@ -688,7 +688,7 @@ static int ehci_hub_control ( /* resume completed? */ else if (time_after_eq(jiffies, ehci->reset_done[wIndex])) { - status |= 1 << USB_PORT_FEAT_C_SUSPEND; + set_bit(wIndex, &ehci->port_c_suspend); ehci->reset_done[wIndex] = 0; /* stop resume signaling */ @@ -765,6 +765,8 @@ static int ehci_hub_control ( status |= 1 << USB_PORT_FEAT_RESET; if (temp & PORT_POWER) status |= 1 << USB_PORT_FEAT_POWER; + if (test_bit(wIndex, &ehci->port_c_suspend)) + status |= 1 << USB_PORT_FEAT_C_SUSPEND; #ifndef VERBOSE_DEBUG if (status & ~0xffff) /* only if wPortChange is interesting */ diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 3cb48230834..35a03095757 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -97,6 +97,8 @@ struct ehci_hcd { /* one per controller */ dedicated to the companion controller */ unsigned long owned_ports; /* which ports are owned by the companion during a bus suspend */ + unsigned long port_c_suspend; /* which ports have + the change-suspend feature turned on */ /* per-HC memory pools (could be per-bus, but ...) */ struct dma_pool *qh_pool; /* qh per active urb */ -- cgit v1.2.3 From b40e43fcc532fa44a375a37d592e32cd0d50fe7a Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 20 May 2008 16:59:10 -0400 Subject: USB: EHCI: fix bug in Iso scheduling This patch (as1098) changes the way ehci-hcd schedules its periodic Iso transfers. That the current scheduling code is wrong is clear on the face of it: Sometimes it returns -EL2NSYNC (meaning that an URB couldn't be scheduled because it was submitted too late), but it does this even when the URB_ISO_ASAP flag is set (meaning the URB should be scheduled as soon as possible). The new code properly implements as-soon-as-possible scheduling, assigning the next unexpired slot as the URB's starting point. It also is more careful about checking for Iso URB completion: It doesn't bother to check for activity during frames that are already over, and it allows for the possibility that some of the URB's packets may have raced the hardware when they were submitted and so never got used (the packet status is set to -EXDEV). This fixes problems several people have experienced with USB video applications. Signed-off-by: Alan Stern Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-sched.c | 67 ++++++++++++++++++++++++++++--------------- 1 file changed, 44 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index be575e46eac..b7853c8bac0 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -1349,18 +1349,27 @@ iso_stream_schedule ( /* when's the last uframe this urb could start? */ max = now + mod; - /* typical case: reuse current schedule. stream is still active, - * and no gaps from host falling behind (irq delays etc) + /* Typical case: reuse current schedule, stream is still active. + * Hopefully there are no gaps from the host falling behind + * (irq delays etc), but if there are we'll take the next + * slot in the schedule, implicitly assuming URB_ISO_ASAP. */ if (likely (!list_empty (&stream->td_list))) { start = stream->next_uframe; if (start < now) start += mod; - if (likely ((start + sched->span) < max)) - goto ready; - /* else fell behind; someday, try to reschedule */ - status = -EL2NSYNC; - goto fail; + + /* Fell behind (by up to twice the slop amount)? */ + if (start >= max - 2 * 8 * SCHEDULE_SLOP) + start += stream->interval * DIV_ROUND_UP( + max - start, stream->interval) - mod; + + /* Tried to schedule too far into the future? */ + if (unlikely((start + sched->span) >= max)) { + status = -EFBIG; + goto fail; + } + goto ready; } /* need to schedule; when's the next (u)frame we could start? @@ -1613,6 +1622,9 @@ itd_complete ( } else if (likely ((t & EHCI_ISOC_ACTIVE) == 0)) { desc->status = 0; desc->actual_length = EHCI_ITD_LENGTH (t); + } else { + /* URB was too late */ + desc->status = -EXDEV; } } @@ -2095,7 +2107,7 @@ done: static void scan_periodic (struct ehci_hcd *ehci) { - unsigned frame, clock, now_uframe, mod; + unsigned now_uframe, frame, clock, clock_frame, mod; unsigned modified; mod = ehci->periodic_size << 3; @@ -2111,6 +2123,7 @@ scan_periodic (struct ehci_hcd *ehci) else clock = now_uframe + mod - 1; clock %= mod; + clock_frame = clock >> 3; for (;;) { union ehci_shadow q, *q_p; @@ -2157,22 +2170,26 @@ restart: case Q_TYPE_ITD: /* If this ITD is still active, leave it for * later processing ... check the next entry. + * No need to check for activity unless the + * frame is current. */ - rmb (); - for (uf = 0; uf < 8 && live; uf++) { - if (0 == (q.itd->hw_transaction [uf] - & ITD_ACTIVE(ehci))) - continue; - incomplete = true; - q_p = &q.itd->itd_next; - hw_p = &q.itd->hw_next; - type = Q_NEXT_TYPE(ehci, + if (frame == clock_frame && live) { + rmb(); + for (uf = 0; uf < 8; uf++) { + if (q.itd->hw_transaction[uf] & + ITD_ACTIVE(ehci)) + break; + } + if (uf < 8) { + incomplete = true; + q_p = &q.itd->itd_next; + hw_p = &q.itd->hw_next; + type = Q_NEXT_TYPE(ehci, q.itd->hw_next); - q = *q_p; - break; + q = *q_p; + break; + } } - if (uf < 8 && live) - break; /* Take finished ITDs out of the schedule * and process them: recycle, maybe report @@ -2189,9 +2206,12 @@ restart: case Q_TYPE_SITD: /* If this SITD is still active, leave it for * later processing ... check the next entry. + * No need to check for activity unless the + * frame is current. */ - if ((q.sitd->hw_results & SITD_ACTIVE(ehci)) - && live) { + if (frame == clock_frame && live && + (q.sitd->hw_results & + SITD_ACTIVE(ehci))) { incomplete = true; q_p = &q.sitd->sitd_next; hw_p = &q.sitd->hw_next; @@ -2260,6 +2280,7 @@ restart: /* rescan the rest of this frame, then ... */ clock = now; + clock_frame = clock >> 3; } else { now_uframe++; now_uframe %= mod; -- cgit v1.2.3 From fa38dfcc56b5f6cce787f9aaa5d1830509213802 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 20 May 2008 16:59:33 -0400 Subject: USB: EHCI: fix performance regression This patch (as1099) fixes a performance regression in ehci-hcd. The fundamental problem is that queue headers get removed from the schedule too quickly, since the code checks for a counter advancing rather than making an actual time-based check. The latency involved in removing the queue header and then relinking it can severely degrade certain kinds of workloads. The patch replaces a simple counter with a timestamp derived from the controller's uframe value. In addition, the delay for unlinking an idle queue header is increased from 5 ms to 10 ms; since some controllers (nVidia) have a latency of up to 1 ms for unlinking, this reduces the relative impact from 20% to 10%. Finally, a logical error left over from the IAA watchdog-timer conversion is corrected. Now the driver will always either unlink an idle queue header or set up a timer to unlink it later. The old code would sometimes fail to do either. Signed-off-by: Alan Stern Cc: David Brownell Cc: Leonid Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 3 ++- drivers/usb/host/ehci-q.c | 15 ++++++++------- 2 files changed, 10 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 369a8a5ea7b..3e3c5d3ea0a 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -84,7 +84,8 @@ static const char hcd_name [] = "ehci_hcd"; #define EHCI_IAA_MSECS 10 /* arbitrary */ #define EHCI_IO_JIFFIES (HZ/10) /* io watchdog > irq_thresh */ #define EHCI_ASYNC_JIFFIES (HZ/20) /* async idle timeout */ -#define EHCI_SHRINK_JIFFIES (HZ/200) /* async qh unlink delay */ +#define EHCI_SHRINK_JIFFIES (HZ/100) /* async qh unlink delay */ +#define EHCI_SHRINK_UFRAMES (10*8) /* same value in uframes */ /* Initial IRQ latency: faster than hw default */ static int log2_irq_thresh = 0; // 0 to 6 diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index b85b54160cd..5200481deb2 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -1116,8 +1116,7 @@ static void scan_async (struct ehci_hcd *ehci) struct ehci_qh *qh; enum ehci_timer_action action = TIMER_IO_WATCHDOG; - if (!++(ehci->stamp)) - ehci->stamp++; + ehci->stamp = ehci_readl(ehci, &ehci->regs->frame_index); timer_action_done (ehci, TIMER_ASYNC_SHRINK); rescan: qh = ehci->async->qh_next.qh; @@ -1148,12 +1147,14 @@ rescan: * doesn't stay idle for long. * (plus, avoids some kind of re-activation race.) */ - if (list_empty (&qh->qtd_list)) { - if (qh->stamp == ehci->stamp) + if (list_empty(&qh->qtd_list) && + qh->qh_state == QH_STATE_LINKED) { + if (!ehci->reclaim && + ((ehci->stamp - qh->stamp) & 8191) >= + EHCI_SHRINK_UFRAMES) + start_unlink_async(ehci, qh); + else action = TIMER_ASYNC_SHRINK; - else if (!ehci->reclaim - && qh->qh_state == QH_STATE_LINKED) - start_unlink_async (ehci, qh); } qh = qh->qh_next.qh; -- cgit v1.2.3 From c7257bd2ecb7b4cc42f9f152c7c059258d434169 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 21 May 2008 13:53:01 -0400 Subject: USB: usb-storage: unusual_devs update for Cypress ATACB This patch (as1101) updates the unusual_devs entry for the Cypress ATACB pass-through. The protocol field is changed from US_PR_BULK to US_PR_DEVICE, since the Cypress devices already set bInterfaceProtocol to Bulk-only. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 1b09578cbb1..5d56893fc1c 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -405,7 +405,7 @@ UNUSUAL_DEV( 0x04a5, 0x3010, 0x0100, 0x0100, UNUSUAL_DEV( 0x04b4, 0x6830, 0x0000, 0x9999, "Cypress", "Cypress AT2LP", - US_SC_CYP_ATACB, US_PR_BULK, NULL, + US_SC_CYP_ATACB, US_PR_DEVICE, NULL, 0), #endif -- cgit v1.2.3 From c5f23b0e08d84f4efc20dece04d7b6796dcc6774 Mon Sep 17 00:00:00 2001 From: Phil Dibowitz Date: Mon, 26 May 2008 21:33:58 +0200 Subject: USB: Fix M600i unusual_devs entry MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It turns out that the unusual_devs entry for the Motorola M600i needs another flag. This patch adds it. Thanks to Atte AndrĂ© Jensen . Signed-off-by: Phil Dibowitz Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 5d56893fc1c..599bb1299f6 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1522,7 +1522,7 @@ UNUSUAL_DEV( 0x0fce, 0xe031, 0x0000, 0x0000, "Sony Ericsson", "M600i", US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_FIX_CAPACITY ), + US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), /* Reported by Kevin Cernekee * Tested on hardware version 1.10. -- cgit v1.2.3 From 2a8bc9e7cfb1761a62ea897b407ea13ec887fd0c Mon Sep 17 00:00:00 2001 From: Javier Smaldone Date: Mon, 26 May 2008 21:44:00 +0200 Subject: USB: Add support for ROKR W5 in unusual_devs.h This patch adds support for rev 2 of an existing unusual_devs entry enabling ROKR W5s to work. Greg, please apply. From: Javier Smaldone Signed-off-by: Phil Dibowitz Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 599bb1299f6..45fe3663fa7 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1716,10 +1716,12 @@ UNUSUAL_DEV( 0x22b8, 0x3010, 0x0001, 0x0001, /* * Patch by Pete Zaitcev * Report by Mark Patton. Red Hat bz#208928. + * Added support for rev 0x0002 (Motorola ROKR W5) + * by Javier Smaldone */ -UNUSUAL_DEV( 0x22b8, 0x4810, 0x0001, 0x0001, +UNUSUAL_DEV( 0x22b8, 0x4810, 0x0001, 0x0002, "Motorola", - "RAZR V3i", + "RAZR V3i/ROKR W5", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), -- cgit v1.2.3 From 598eff6d2f3b8805232edc5f4a6b0c1e698dc482 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ren=C3=A9=20Rebe?= Date: Tue, 27 May 2008 09:05:46 +0200 Subject: USB: add another scanner quirk MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Like the HP53{00,70} scanner other devices of the OEM Avision require the USB_QUIRK_STRING_FETCH_255 to correct set a configuration with "recent" Linux kernels. Signed-off-by: RenĂ© Rebe Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 2e201939029..3da1ab4b389 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -47,6 +47,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* Edirol SD-20 */ { USB_DEVICE(0x0582, 0x0027), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Avision AV600U */ + { USB_DEVICE(0x0638, 0x0a13), .driver_info = + USB_QUIRK_STRING_FETCH_255 }, + /* M-Systems Flash Disk Pioneers */ { USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME }, -- cgit v1.2.3 From 4be2fa186d54758296d30c565d7b5111dd45b000 Mon Sep 17 00:00:00 2001 From: Steve Murphy Date: Fri, 23 May 2008 23:39:05 +0530 Subject: USB: pl2303: another product ID I've just got a USB GPRS/EDGE modem branded Manufacturer Micromax Model MMX610U (see http://www.airtel.in/level2_t3data.aspx?path=1/106/179) working by adding another product ID to pl2303. Modem info reports same module as Max Arnold's i.e.SIMCOM SIM600 but with product ID 0x0612 (cf Ox0611). From: Steve Murphy Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/pl2303.c | 1 + drivers/usb/serial/pl2303.h | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 234c5eea95a..103195abd41 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -56,6 +56,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) }, { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) }, { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) }, { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) }, diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index 3bdefe02050..cff160abb13 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -14,6 +14,7 @@ #define PL2303_PRODUCT_ID_PHAROS 0xaaa0 #define PL2303_PRODUCT_ID_RSAQ3 0xaaa2 #define PL2303_PRODUCT_ID_ALDIGA 0x0611 +#define PL2303_PRODUCT_ID_MMX 0x0612 #define ATEN_VENDOR_ID 0x0557 #define ATEN_VENDOR_ID2 0x0547 -- cgit v1.2.3 From a7f3872c43b8001f01000f79583d422c6995f98d Mon Sep 17 00:00:00 2001 From: Michael Karcher Date: Wed, 28 May 2008 23:58:18 +0200 Subject: USB: usb-serial: option: Don't match Huawei driver CD images Add the interface info matching to all Huawei cards, as they all also contain a Mass Storage Device interface (usually containing Windows drivers) which should not get bound by this driver. See also drivers/usb/storage/unusual_devs.h Signed-off-by: Michael Karcher Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 6cecd2c12b1..43cfde83a93 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -236,25 +236,25 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_NETWORK_EX) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_NETWORK) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1401) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1403) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1405) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1406) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1408) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1409) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1410) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1411) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1412) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1413) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1414) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1415) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1416) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1417) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1418) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1419) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1401, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1403, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1405, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1406, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1408, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1409, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1410, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1411, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1412, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1413, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1414, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1415, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1416, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1417, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1418, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1419, 0xff, 0xff, 0xff) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_9508) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, /* Novatel Merlin V640/XV620 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, /* Novatel Merlin V620/S620 */ -- cgit v1.2.3 From 185e3dead35dacb79c8cca1073fd67a26d09a0d7 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Thu, 29 May 2008 21:04:45 +0800 Subject: USB: fsl_usb2_udc: fix recursive lock UDC needs to release lock before calling out to gadget driver, since it may need to reenter. The change fixes kernel BUG observed on rt kernel. > kernel BUG at kernel/rtmutex.c:683! > stopped custom tracer. > Oops: Exception in kernel mode, sig: 5 [#1] > PREEMPT MPC834x ITX > NIP: c021629c LR: c0216270 CTR: 00000000 > REGS: df761d70 TRAP: 0700 Not tainted (2.6.23.9-rt13) > MSR: 00021032 CR: 28000022 XER: 00000000 > TASK = df632080[241] 'IRQ-38' THREAD: df760000 > GPR00: 00000001 df761e20 df632080 00000000 11111111 00000000 df761e6c > 00000000 > GPR08: df761e48 00000000 df761e50 00000000 80000000 ede5cdde 1fffd000 > 00800000 > GPR16: ffffffff 00000000 007fff00 00000040 00000000 007ffeb0 00000000 > 1fff8b08 > GPR24: 00000000 00000026 00000000 df79a320 c026b2e8 c02240bc 00009032 > df79a320 > NIP [c021629c] rt_spin_lock_slowlock+0x9c/0x200 > LR [c0216270] rt_spin_lock_slowlock+0x70/0x200 > Call Trace: > [df761e20] [c0216270] rt_spin_lock_slowlock+0x70/0x200 (unreliable) > [df761e90] [c0182828] fsl_ep_disable+0xcc/0x154 > [df761eb0] [c0184d30] eth_reset_config+0x88/0x1d0 > [df761ed0] [c0184ec0] eth_disconnect+0x48/0x64 > [df761ef0] [c01831a4] reset_queues+0x60/0x78 > [df761f00] [c0183b74] fsl_udc_irq+0x9b8/0xa58 > [df761f50] [c003ef30] handle_IRQ_event+0x64/0x100 > [df761f80] [c003f758] thread_simple_irq+0x6c/0xc8 > [df761fa0] [c003f888] do_irqd+0xd4/0x2e4 > [df761fd0] [c0032284] kthread+0x50/0x8c > [df761ff0] [c000f9b4] kernel_thread+0x44/0x60 Signed-off-by: Li Yang Cc: Eugene T. Bordenkircher Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/fsl_usb2_udc.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c index 651b8270139..18687543d7f 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.c +++ b/drivers/usb/gadget/fsl_usb2_udc.c @@ -1627,7 +1627,9 @@ static int reset_queues(struct fsl_udc *udc) udc_reset_ep_queue(udc, pipe); /* report disconnect; the driver is already quiesced */ + spin_unlock(&udc->lock); udc->driver->disconnect(&udc->gadget); + spin_lock(&udc->lock); return 0; } -- cgit v1.2.3 From bb7e6984ecaebe6989d0e781e303469255871432 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 29 May 2008 19:43:27 -0700 Subject: Revert "USB: EHCI: fix performance regression" This reverts commit fa38dfcc56b5f6cce787f9aaa5d1830509213802. It wasn't really a regression and David and Alan are still working through the issues reported. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 3 +-- drivers/usb/host/ehci-q.c | 15 +++++++-------- 2 files changed, 8 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 3e3c5d3ea0a..369a8a5ea7b 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -84,8 +84,7 @@ static const char hcd_name [] = "ehci_hcd"; #define EHCI_IAA_MSECS 10 /* arbitrary */ #define EHCI_IO_JIFFIES (HZ/10) /* io watchdog > irq_thresh */ #define EHCI_ASYNC_JIFFIES (HZ/20) /* async idle timeout */ -#define EHCI_SHRINK_JIFFIES (HZ/100) /* async qh unlink delay */ -#define EHCI_SHRINK_UFRAMES (10*8) /* same value in uframes */ +#define EHCI_SHRINK_JIFFIES (HZ/200) /* async qh unlink delay */ /* Initial IRQ latency: faster than hw default */ static int log2_irq_thresh = 0; // 0 to 6 diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 5200481deb2..b85b54160cd 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -1116,7 +1116,8 @@ static void scan_async (struct ehci_hcd *ehci) struct ehci_qh *qh; enum ehci_timer_action action = TIMER_IO_WATCHDOG; - ehci->stamp = ehci_readl(ehci, &ehci->regs->frame_index); + if (!++(ehci->stamp)) + ehci->stamp++; timer_action_done (ehci, TIMER_ASYNC_SHRINK); rescan: qh = ehci->async->qh_next.qh; @@ -1147,14 +1148,12 @@ rescan: * doesn't stay idle for long. * (plus, avoids some kind of re-activation race.) */ - if (list_empty(&qh->qtd_list) && - qh->qh_state == QH_STATE_LINKED) { - if (!ehci->reclaim && - ((ehci->stamp - qh->stamp) & 8191) >= - EHCI_SHRINK_UFRAMES) - start_unlink_async(ehci, qh); - else + if (list_empty (&qh->qtd_list)) { + if (qh->stamp == ehci->stamp) action = TIMER_ASYNC_SHRINK; + else if (!ehci->reclaim + && qh->qh_state == QH_STATE_LINKED) + start_unlink_async (ehci, qh); } qh = qh->qh_next.qh; -- cgit v1.2.3 From 413c239fad68258157f903b3ffd9bfcc53f5e34b Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Fri, 30 May 2008 10:16:40 +1000 Subject: driver-core: prepare for 2.6.27 api change by adding dev_set_name Create the dev_set_name function now so that various subsystems can start changing over to it before other changes in 2.6.27 will make it compulsory. Cc: Kay Sievers Signed-off-by: Stephen Rothwell Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'drivers') diff --git a/drivers/base/core.c b/drivers/base/core.c index 72eccae4904..422cfcad486 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -759,6 +759,21 @@ static void device_remove_class_symlinks(struct device *dev) sysfs_remove_link(&dev->kobj, "subsystem"); } +/** + * dev_set_name - set a device name + * @dev: device + */ +int dev_set_name(struct device *dev, const char *fmt, ...) +{ + va_list vargs; + + va_start(vargs, fmt); + vsnprintf(dev->bus_id, sizeof(dev->bus_id), fmt, vargs); + va_end(vargs); + return 0; +} +EXPORT_SYMBOL_GPL(dev_set_name); + /** * device_add - add device to device hierarchy. * @dev: device. -- cgit v1.2.3 From e27810f11340987df123a99eb9ae14c054a55639 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 30 May 2008 15:09:40 -0500 Subject: lguest: use ioremap_cache, not ioremap Thanks to Jon Corbet & LWN. Only took me a day to join the dots. Host->Guest netcat before (with unnecessily large receive buffers): 1073741824 bytes (1.1 GB) copied, 24.7528 seconds, 43.4 MB/s After: 1073741824 bytes (1.1 GB) copied, 17.6369 seconds, 60.9 MB/s Signed-off-by: Rusty Russell --- drivers/lguest/lguest_device.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c index 8080249957a..f4fdf351a7c 100644 --- a/drivers/lguest/lguest_device.c +++ b/drivers/lguest/lguest_device.c @@ -27,7 +27,7 @@ static unsigned int dev_index; * __iomem to quieten sparse. */ static inline void *lguest_map(unsigned long phys_addr, unsigned long pages) { - return (__force void *)ioremap(phys_addr, PAGE_SIZE*pages); + return (__force void *)ioremap_cache(phys_addr, PAGE_SIZE*pages); } static inline void lguest_unmap(void *addr) -- cgit v1.2.3 From ac9d463afb1ca2434335351f3b7d9e4c8f8470e9 Mon Sep 17 00:00:00 2001 From: Chris Lalancette Date: Fri, 30 May 2008 15:09:41 -0500 Subject: Fix crash in virtio_blk during modprobe ; rmmod ; modprobe Fix a modprobe virtio_blk ; rmmod virtio_blk ; modprobe virtio_blk crash; this was basically because we weren't doing "del_gendisk()" in the remove path. Signed-off-by: Chris Lalancette Signed-off-by: Rusty Russell (moved del_gendisk up) --- drivers/block/virtio_blk.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 84e064ffee5..c4804f3465d 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -311,6 +311,7 @@ static void virtblk_remove(struct virtio_device *vdev) /* Stop all the virtqueues. */ vdev->config->reset(vdev); + del_gendisk(vblk->disk); blk_cleanup_queue(vblk->disk->queue); put_disk(vblk->disk); mempool_destroy(vblk->pool); -- cgit v1.2.3 From 2ad3cfbac58d0a6c6e65aafd9e0e757ca3d35292 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 30 May 2008 15:09:41 -0500 Subject: virtio: bus_id for devices should contain 'virtio' Chris Lalancette points out that virtio.c sets all device names to '0', '1', etc, which looks silly in /proc/interrupts. We change this from '%d' to 'virtio%d'. Signed-off-by: Rusty Russell Cc: Christian Borntraeger Cc: Martin Schwidefsky Cc: Carsten Otte Cc: Heiko Carstens Cc: Chris Lalancette Cc: Anthony Liguori --- drivers/virtio/virtio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c index 13866789b35..59918dfc3cb 100644 --- a/drivers/virtio/virtio.c +++ b/drivers/virtio/virtio.c @@ -166,7 +166,7 @@ int register_virtio_device(struct virtio_device *dev) int err; dev->dev.bus = &virtio_bus; - sprintf(dev->dev.bus_id, "%u", dev->index); + sprintf(dev->dev.bus_id, "virtio%u", dev->index); /* We always start by resetting the device, in case a previous * driver messed it up. This also tests that code path a little. */ -- cgit v1.2.3 From 5610bd1524332fe7d651eb56cc780e32763a2ac3 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 30 May 2008 15:09:42 -0500 Subject: virtio: virtio_pci should not set bus_id. The common virtio code sets the bus_id, overriding anything virtio_pci sets anyway. Signed-off-by: Rusty Russell Cc: Christian Borntraeger Cc: Martin Schwidefsky Cc: Carsten Otte Cc: Heiko Carstens Cc: Chris Lalancette Cc: Anthony Liguori --- drivers/virtio/virtio_pci.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c index 27e9fc9117c..2913c2f309f 100644 --- a/drivers/virtio/virtio_pci.c +++ b/drivers/virtio/virtio_pci.c @@ -325,7 +325,6 @@ static int __devinit virtio_pci_probe(struct pci_dev *pci_dev, if (vp_dev == NULL) return -ENOMEM; - snprintf(vp_dev->vdev.dev.bus_id, BUS_ID_SIZE, "virtio%d", dev_index); vp_dev->vdev.index = dev_index; dev_index++; -- cgit v1.2.3 From b769f579081943f14e0ff03b7b0bd3a11cf14625 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 30 May 2008 15:09:42 -0500 Subject: virtio: set device index in common code. Anthony Liguori points out that three different transports use the virtio code, but each one keeps its own counter to set the virtio_device's index field. In theory (though not in current practice) this means that names could be duplicated, and that risk grows as more transports are created. So we move the selection of the unique virtio_device.index into the common code in virtio.c, which has the side-benefit of removing duplicate code. The only complexity is that lguest and S/390 use the index to uniquely identify the device in case of catastrophic failure before register_virtio_device() is called: now we use the offset within the descriptor page as a unique identifier for the printks. Signed-off-by: Rusty Russell Cc: Christian Borntraeger Cc: Martin Schwidefsky Cc: Carsten Otte Cc: Heiko Carstens Cc: Chris Lalancette Cc: Anthony Liguori --- drivers/lguest/lguest_device.c | 23 +++++++++-------------- drivers/s390/kvm/kvm_virtio.c | 18 ++++++------------ drivers/virtio/virtio.c | 6 ++++++ drivers/virtio/virtio_pci.c | 6 ------ 4 files changed, 21 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c index f4fdf351a7c..1a8de57289e 100644 --- a/drivers/lguest/lguest_device.c +++ b/drivers/lguest/lguest_device.c @@ -20,9 +20,6 @@ /* The pointer to our (page) of device descriptions. */ static void *lguest_devices; -/* Unique numbering for lguest devices. */ -static unsigned int dev_index; - /* For Guests, device memory can be used as normal memory, so we cast away the * __iomem to quieten sparse. */ static inline void *lguest_map(unsigned long phys_addr, unsigned long pages) @@ -325,8 +322,10 @@ static struct device lguest_root = { * As Andrew Tridgell says, "Untested code is buggy code". * * It's worth reading this carefully: we start with a pointer to the new device - * descriptor in the "lguest_devices" page. */ -static void add_lguest_device(struct lguest_device_desc *d) + * descriptor in the "lguest_devices" page, and the offset into the device + * descriptor page so we can uniquely identify it if things go badly wrong. */ +static void add_lguest_device(struct lguest_device_desc *d, + unsigned int offset) { struct lguest_device *ldev; @@ -334,18 +333,14 @@ static void add_lguest_device(struct lguest_device_desc *d) * it. */ ldev = kzalloc(sizeof(*ldev), GFP_KERNEL); if (!ldev) { - printk(KERN_EMERG "Cannot allocate lguest dev %u\n", - dev_index++); + printk(KERN_EMERG "Cannot allocate lguest dev %u type %u\n", + offset, d->type); return; } /* This devices' parent is the lguest/ dir. */ ldev->vdev.dev.parent = &lguest_root; /* We have a unique device index thanks to the dev_index counter. */ - ldev->vdev.index = dev_index++; - /* The device type comes straight from the descriptor. There's also a - * device vendor field in the virtio_device struct, which we leave as - * 0. */ ldev->vdev.id.device = d->type; /* We have a simple set of routines for querying the device's * configuration information and setting its status. */ @@ -357,8 +352,8 @@ static void add_lguest_device(struct lguest_device_desc *d) * virtio_device and calls device_register(). This makes the bus * infrastructure look for a matching driver. */ if (register_virtio_device(&ldev->vdev) != 0) { - printk(KERN_ERR "Failed to register lguest device %u\n", - ldev->vdev.index); + printk(KERN_ERR "Failed to register lguest dev %u type %u\n", + offset, d->type); kfree(ldev); } } @@ -379,7 +374,7 @@ static void scan_devices(void) break; printk("Device at %i has size %u\n", i, desc_size(d)); - add_lguest_device(d); + add_lguest_device(d, i); } } diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c index 9f55ce6f3c7..5ab34340919 100644 --- a/drivers/s390/kvm/kvm_virtio.c +++ b/drivers/s390/kvm/kvm_virtio.c @@ -31,11 +31,6 @@ */ static void *kvm_devices; -/* - * Unique numbering for kvm devices. - */ -static unsigned int dev_index; - struct kvm_device { struct virtio_device vdev; struct kvm_device_desc *desc; @@ -250,26 +245,25 @@ static struct device kvm_root = { * adds a new device and register it with virtio * appropriate drivers are loaded by the device model */ -static void add_kvm_device(struct kvm_device_desc *d) +static void add_kvm_device(struct kvm_device_desc *d, unsigned int offset) { struct kvm_device *kdev; kdev = kzalloc(sizeof(*kdev), GFP_KERNEL); if (!kdev) { - printk(KERN_EMERG "Cannot allocate kvm dev %u\n", - dev_index++); + printk(KERN_EMERG "Cannot allocate kvm dev %u type %u\n", + offset, d->type); return; } kdev->vdev.dev.parent = &kvm_root; - kdev->vdev.index = dev_index++; kdev->vdev.id.device = d->type; kdev->vdev.config = &kvm_vq_configspace_ops; kdev->desc = d; if (register_virtio_device(&kdev->vdev) != 0) { - printk(KERN_ERR "Failed to register kvm device %u\n", - kdev->vdev.index); + printk(KERN_ERR "Failed to register kvm device %u type %u\n", + offset, d->type); kfree(kdev); } } @@ -289,7 +283,7 @@ static void scan_devices(void) if (d->type == 0) break; - add_kvm_device(d); + add_kvm_device(d, i); } } diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c index 59918dfc3cb..0f3c2bb7bf3 100644 --- a/drivers/virtio/virtio.c +++ b/drivers/virtio/virtio.c @@ -2,6 +2,9 @@ #include #include +/* Unique numbering for virtio devices. */ +static unsigned int dev_index; + static ssize_t device_show(struct device *_d, struct device_attribute *attr, char *buf) { @@ -166,6 +169,9 @@ int register_virtio_device(struct virtio_device *dev) int err; dev->dev.bus = &virtio_bus; + + /* Assign a unique device index and hence name. */ + dev->index = dev_index++; sprintf(dev->dev.bus_id, "virtio%u", dev->index); /* We always start by resetting the device, in case a previous diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c index 2913c2f309f..eae7236310e 100644 --- a/drivers/virtio/virtio_pci.c +++ b/drivers/virtio/virtio_pci.c @@ -78,9 +78,6 @@ static struct device virtio_pci_root = { .bus_id = "virtio-pci", }; -/* Unique numbering for devices under the kvm root */ -static unsigned int dev_index; - /* Convert a generic virtio device to our structure */ static struct virtio_pci_device *to_vp_device(struct virtio_device *vdev) { @@ -325,9 +322,6 @@ static int __devinit virtio_pci_probe(struct pci_dev *pci_dev, if (vp_dev == NULL) return -ENOMEM; - vp_dev->vdev.index = dev_index; - dev_index++; - vp_dev->vdev.dev.parent = &virtio_pci_root; vp_dev->vdev.config = &virtio_pci_config_ops; vp_dev->pci_dev = pci_dev; -- cgit v1.2.3 From 3ef536095446552823fc488fec1c5451aab1260d Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Fri, 16 May 2008 11:17:03 +0200 Subject: virtio_blk: allow read-only disks Hello Rusty, sometimes it is useful to share a disk (e.g. usr). To avoid file system corruption, the disk should be mounted read-only in that case. This patch adds a new feature flag, that allows the host to specify, if the disk should be considered read-only. Signed-off-by: Christian Borntraeger Signed-off-by: Rusty Russell --- drivers/block/virtio_blk.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index c4804f3465d..dd7ea203f94 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -260,6 +260,10 @@ static int virtblk_probe(struct virtio_device *vdev) if (virtio_has_feature(vdev, VIRTIO_BLK_F_BARRIER)) blk_queue_ordered(vblk->disk->queue, QUEUE_ORDERED_TAG, NULL); + /* If disk is read-only in the host, the guest should obey */ + if (virtio_has_feature(vdev, VIRTIO_BLK_F_RO)) + set_disk_ro(vblk->disk, 1); + /* Host must always specify the capacity. */ vdev->config->get(vdev, offsetof(struct virtio_blk_config, capacity), &cap, sizeof(cap)); @@ -326,7 +330,7 @@ static struct virtio_device_id id_table[] = { static unsigned int features[] = { VIRTIO_BLK_F_BARRIER, VIRTIO_BLK_F_SEG_MAX, VIRTIO_BLK_F_SIZE_MAX, - VIRTIO_BLK_F_GEOMETRY, + VIRTIO_BLK_F_GEOMETRY, VIRTIO_BLK_F_RO, }; static struct virtio_driver virtio_blk = { -- cgit v1.2.3 From f7f510ec195781c857ab76366a3e1c59e1caae42 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 30 May 2008 15:09:44 -0500 Subject: virtio: An entropy device, as suggested by hpa. Note that by itself, having a "hardware" random generator does very little: you should probably run "rngd" in your guest to feed this into the kernel entropy pool. Included: virtio_rng: dont use vmalloced addresses for virtio If virtio_rng is build as a module, random_data is an address in vmalloc space. As virtio expects guest real addresses, this can cause any kind of funny behaviour, so lets allocate random_data dynamically with kmalloc. Signed-off-by: Christian Borntraeger Signed-off-by: Rusty Russell --- drivers/char/hw_random/Kconfig | 9 +++ drivers/char/hw_random/Makefile | 1 + drivers/char/hw_random/virtio-rng.c | 155 ++++++++++++++++++++++++++++++++++++ 3 files changed, 165 insertions(+) create mode 100644 drivers/char/hw_random/virtio-rng.c (limited to 'drivers') diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig index 8d6c2089d2a..efd0b4db7c8 100644 --- a/drivers/char/hw_random/Kconfig +++ b/drivers/char/hw_random/Kconfig @@ -112,3 +112,12 @@ config HW_RANDOM_PASEMI If unsure, say Y. +config HW_RANDOM_VIRTIO + tristate "VirtIO Random Number Generator support" + depends on HW_RANDOM && VIRTIO + ---help--- + This driver provides kernel-side support for the virtual Random Number + Generator hardware. + + To compile this driver as a module, choose M here: the + module will be called virtio-rng. If unsure, say N. diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile index c8b7300e2fb..b4940ddbb35 100644 --- a/drivers/char/hw_random/Makefile +++ b/drivers/char/hw_random/Makefile @@ -11,3 +11,4 @@ obj-$(CONFIG_HW_RANDOM_VIA) += via-rng.o obj-$(CONFIG_HW_RANDOM_IXP4XX) += ixp4xx-rng.o obj-$(CONFIG_HW_RANDOM_OMAP) += omap-rng.o obj-$(CONFIG_HW_RANDOM_PASEMI) += pasemi-rng.o +obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio-rng.o diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c new file mode 100644 index 00000000000..d0e563e4fc3 --- /dev/null +++ b/drivers/char/hw_random/virtio-rng.c @@ -0,0 +1,155 @@ +/* + * Randomness driver for virtio + * Copyright (C) 2007, 2008 Rusty Russell IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include +#include +#include +#include +#include +#include + +/* The host will fill any buffer we give it with sweet, sweet randomness. We + * give it 64 bytes at a time, and the hwrng framework takes it 4 bytes at a + * time. */ +#define RANDOM_DATA_SIZE 64 + +static struct virtqueue *vq; +static u32 *random_data; +static unsigned int data_left; +static DECLARE_COMPLETION(have_data); + +static void random_recv_done(struct virtqueue *vq) +{ + int len; + + /* We never get spurious callbacks. */ + if (!vq->vq_ops->get_buf(vq, &len)) + BUG(); + + data_left = len / sizeof(random_data[0]); + complete(&have_data); +} + +static void register_buffer(void) +{ + struct scatterlist sg; + + sg_init_one(&sg, random_data, RANDOM_DATA_SIZE); + /* There should always be room for one buffer. */ + if (vq->vq_ops->add_buf(vq, &sg, 0, 1, random_data) != 0) + BUG(); + vq->vq_ops->kick(vq); +} + +/* At least we don't udelay() in a loop like some other drivers. */ +static int virtio_data_present(struct hwrng *rng, int wait) +{ + if (data_left) + return 1; + + if (!wait) + return 0; + + wait_for_completion(&have_data); + return 1; +} + +/* virtio_data_present() must have succeeded before this is called. */ +static int virtio_data_read(struct hwrng *rng, u32 *data) +{ + BUG_ON(!data_left); + + *data = random_data[--data_left]; + + if (!data_left) { + init_completion(&have_data); + register_buffer(); + } + return sizeof(*data); +} + +static struct hwrng virtio_hwrng = { + .name = "virtio", + .data_present = virtio_data_present, + .data_read = virtio_data_read, +}; + +static int virtrng_probe(struct virtio_device *vdev) +{ + int err; + + /* We expect a single virtqueue. */ + vq = vdev->config->find_vq(vdev, 0, random_recv_done); + if (IS_ERR(vq)) + return PTR_ERR(vq); + + err = hwrng_register(&virtio_hwrng); + if (err) { + vdev->config->del_vq(vq); + return err; + } + + register_buffer(); + return 0; +} + +static void virtrng_remove(struct virtio_device *vdev) +{ + vdev->config->reset(vdev); + hwrng_unregister(&virtio_hwrng); + vdev->config->del_vq(vq); +} + +static struct virtio_device_id id_table[] = { + { VIRTIO_ID_RNG, VIRTIO_DEV_ANY_ID }, + { 0 }, +}; + +static struct virtio_driver virtio_rng = { + .driver.name = KBUILD_MODNAME, + .driver.owner = THIS_MODULE, + .id_table = id_table, + .probe = virtrng_probe, + .remove = __devexit_p(virtrng_remove), +}; + +static int __init init(void) +{ + int err; + + random_data = kmalloc(RANDOM_DATA_SIZE, GFP_KERNEL); + if (!random_data) + return -ENOMEM; + + err = register_virtio_driver(&virtio_rng); + if (err) + kfree(random_data); + return err; +} + +static void __exit fini(void) +{ + kfree(random_data); + unregister_virtio_driver(&virtio_rng); +} +module_init(init); +module_exit(fini); + +MODULE_DEVICE_TABLE(virtio, id_table); +MODULE_DESCRIPTION("Virtio random number driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 52a3a05f3ab82655ffa4c9bf6835565c98a3c2e5 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Mon, 26 May 2008 11:29:27 +0200 Subject: virtio_net: another race with virtio_net and enable_cb Hello Rusty, seems that we still have a problem with virtio_net and the enable_cb callback. During a long running network stress tests with virtio and got the following oops: ------------[ cut here ]------------ kernel BUG at drivers/virtio/virtio_ring.c:230! illegal operation: 0001 [#1] SMP Modules linked in: CPU: 0 Not tainted 2.6.26-rc2-kvm-00436-gc94c08b-dirty #34 Process netserver (pid: 2582, task: 000000000fbc4c68, ksp: 000000000f42b990) Krnl PSW : 0704c00180000000 00000000002d0ec8 (vring_enable_cb+0x1c/0x60) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 EA:3 Krnl GPRS: 0000000000000000 0000000000000000 000000000ef3d000 0000000010009800 0000000000000000 0000000000419ce0 0000000000000080 000000000000007b 000000000adb5538 000000000ef40900 000000000ef40000 000000000ef40920 0000000000000000 0000000000000005 000000000029c1b0 000000000fea7d18 Krnl Code: 00000000002d0ebc: a7110001 tmll %r1,1 00000000002d0ec0: a7740004 brc 7,2d0ec8 00000000002d0ec4: a7f40001 brc 15,2d0ec6 >00000000002d0ec8: a517fffe nill %r1,65534 00000000002d0ecc: 40103000 sth %r1,0(%r3) 00000000002d0ed0: 07f0 bcr 15,%r0 00000000002d0ed2: e31020380004 lg %r1,56(%r2) 00000000002d0ed8: a7480000 lhi %r4,0 Call Trace: ([<000000000029c0fc>] virtnet_poll+0x290/0x3b8) [<0000000000333fb8>] net_rx_action+0x9c/0x1b8 [<00000000001394bc>] __do_softirq+0x74/0x108 [<000000000010d16a>] do_softirq+0x92/0xac [<0000000000139826>] irq_exit+0x72/0xc8 [<000000000010a7b6>] do_extint+0xe2/0x104 [<0000000000110508>] ext_no_vtime+0x16/0x1a Last Breaking-Event-Address: [<00000000002d0ec4>] vring_enable_cb+0x18/0x60 I looked into the virtio_net code for some time and I think the following scenario happened. Please look at virtnet_poll: [...] /* Out of packets? */ if (received < budget) { netif_rx_complete(vi->dev, napi); if (unlikely(!vi->rvq->vq_ops->enable_cb(vi->rvq)) && napi_schedule_prep(napi)) { vi->rvq->vq_ops->disable_cb(vi->rvq); __netif_rx_schedule(vi->dev, napi); goto again; } } If an interrupt arrives after netif_rx_complete, a second poll routine can run on a different cpu. The second check for napi_schedule_prep would prevent any harm in the network stack, but we have called enable_cb possibly after the disable_cb in skb_recv_done. static void skb_recv_done(struct virtqueue *rvq) { struct virtnet_info *vi = rvq->vdev->priv; /* Schedule NAPI, Suppress further interrupts if successful. */ if (netif_rx_schedule_prep(vi->dev, &vi->napi)) { rvq->vq_ops->disable_cb(rvq); __netif_rx_schedule(vi->dev, &vi->napi); } } That means that the second poll routine runs with interrupts enabled, which is ok, since we can handle additional interrupts. The problem is now that the second poll routine might also call enable_cb, triggering the BUG. The only solution I can come up with, is to remove the BUG statement in enable_cb - similar to disable_cb. Opinions or better ideas where the oops could come from? Signed-off-by: Christian Borntraeger Signed-off-by: Rusty Russell --- drivers/virtio/virtio_ring.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c index 937a49d6772..96d2567a7df 100644 --- a/drivers/virtio/virtio_ring.c +++ b/drivers/virtio/virtio_ring.c @@ -227,7 +227,6 @@ static bool vring_enable_cb(struct virtqueue *_vq) struct vring_virtqueue *vq = to_vvq(_vq); START_USE(vq); - BUG_ON(!(vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)); /* We optimistically turn back on interrupts, then check if there was * more to do. */ -- cgit v1.2.3 From b4f68be6c5d507afdcd74f5be3df0b1209cda503 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 30 May 2008 15:09:45 -0500 Subject: virtio: force callback on empty. virtio allows drivers to suppress callbacks (ie. interrupts) for efficiency (no locking, it's just an optimization). There's a similar mechanism for the host to suppress notifications coming from the guest: in that case, we ignore the suppression if the ring is completely full. It turns out that life is simpler if the host similarly ignores callback suppression when the ring is completely empty: the network driver wants to free up old packets in a timely manner, and otherwise has to use a timer to poll. We have to remove the code which ignores interrupts when the driver has disabled them (again, it had no locking and hence was unreliable anyway). Signed-off-by: Rusty Russell --- drivers/virtio/virtio_ring.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'drivers') diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c index 96d2567a7df..72bf8bc0901 100644 --- a/drivers/virtio/virtio_ring.c +++ b/drivers/virtio/virtio_ring.c @@ -253,13 +253,6 @@ irqreturn_t vring_interrupt(int irq, void *_vq) if (unlikely(vq->broken)) return IRQ_HANDLED; - /* Other side may have missed us turning off the interrupt, - * but we should preserve disable semantic for virtio users. */ - if (unlikely(vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)) { - pr_debug("virtqueue interrupt after disable for %p\n", vq); - return IRQ_HANDLED; - } - pr_debug("virtqueue callback for %p (%p)\n", vq, vq->vq.callback); if (vq->vq.callback) vq->vq.callback(&vq->vq); -- cgit v1.2.3 From f71ad62a264a89cb1952df0c92b167005de8d1b0 Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Fri, 30 May 2008 10:03:25 +0200 Subject: [S390] tape: Fix race condition in tape block device driver Due to incorrect function call sequence it can happen that a tape block request is finished before the request is taken from the block request queue. The following sequence leads to that condition: * tapeblock_start_request() -> start CCW program * Request finishes -> IO interrupt * tapeblock_end_request() * end_that_request_last() If blkdev_dequeue_request() has not been called before end_that_request_last(), a kernel bug is triggered in end_that_request_last() because the request is still queued. To solve that problem blkdev_dequeue_request() has to be called before starting the CCW program. Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- drivers/s390/char/tape_block.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c index ddc4a114e7f..95da72bc17e 100644 --- a/drivers/s390/char/tape_block.c +++ b/drivers/s390/char/tape_block.c @@ -179,11 +179,11 @@ tapeblock_requeue(struct work_struct *work) { tapeblock_end_request(req, -EIO); continue; } + blkdev_dequeue_request(req); + nr_queued++; spin_unlock_irq(&device->blk_data.request_queue_lock); rc = tapeblock_start_request(device, req); spin_lock_irq(&device->blk_data.request_queue_lock); - blkdev_dequeue_request(req); - nr_queued++; } spin_unlock_irq(&device->blk_data.request_queue_lock); atomic_set(&device->blk_data.requeue_scheduled, 0); -- cgit v1.2.3 From 67060d9c1f5d91c917cc51bed464cb5638eaddbc Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 30 May 2008 10:03:27 +0200 Subject: [S390] Fix section mismatch warnings. This fixes the last remaining section mismatch warnings in s390 architecture code. It reveals also a real bug introduced by... me with git commit 2069e978d5a6e7b45d58027e3de7f879b8c5e488 ("[S390] sparsemem vmemmap: initialize memmap.") Calling the generic vmemmap_alloc_block() function to get initialized memory is a nice idea, however that function is __meminit annotated and therefore the function might be gone if we try to call it later. This can happen if a DCSS segment gets added. So basically revert the patch and clear the memmap explicitly to fix the original bug. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/char/sclp_config.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/s390/char/sclp_config.c b/drivers/s390/char/sclp_config.c index 9e784d5f7f5..ad05a87bc48 100644 --- a/drivers/s390/char/sclp_config.c +++ b/drivers/s390/char/sclp_config.c @@ -40,7 +40,7 @@ static void sclp_cpu_capability_notify(struct work_struct *work) put_online_cpus(); } -static void sclp_cpu_change_notify(struct work_struct *work) +static void __ref sclp_cpu_change_notify(struct work_struct *work) { smp_rescan_cpus(); } -- cgit v1.2.3 From d4820e44b0ae6830b1d634e6d0a425d839388c06 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 30 May 2008 10:03:30 +0200 Subject: [S390] sclp_vt220: fix scheduling while atomic bug. The driver incorrectly assumed that putchar will only be called from schedulable process context and therefore blocked and waited if no free output buffers where available. Since putchar may also be called from BH context this may lead to deadlocks. To fix this just return the number of characters accepted and let the upper layer handle the rest. The console write function will busy wait (sclp_sync_wait) until a buffer is available again. Cc: Peter Oberparleiter Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/char/sclp_vt220.c | 27 +++++++-------------------- 1 file changed, 7 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/char/sclp_vt220.c b/drivers/s390/char/sclp_vt220.c index 35707c04e61..62576af36f4 100644 --- a/drivers/s390/char/sclp_vt220.c +++ b/drivers/s390/char/sclp_vt220.c @@ -71,9 +71,6 @@ static struct list_head sclp_vt220_outqueue; /* Number of requests in outqueue */ static int sclp_vt220_outqueue_count; -/* Wait queue used to delay write requests while we've run out of buffers */ -static wait_queue_head_t sclp_vt220_waitq; - /* Timer used for delaying write requests to merge subsequent messages into * a single buffer */ static struct timer_list sclp_vt220_timer; @@ -133,7 +130,6 @@ sclp_vt220_process_queue(struct sclp_vt220_request *request) } while (request && __sclp_vt220_emit(request)); if (request == NULL && sclp_vt220_flush_later) sclp_vt220_emit_current(); - wake_up(&sclp_vt220_waitq); /* Check if the tty needs a wake up call */ if (sclp_vt220_tty != NULL) { tty_wakeup(sclp_vt220_tty); @@ -383,7 +379,7 @@ sclp_vt220_timeout(unsigned long data) */ static int __sclp_vt220_write(const unsigned char *buf, int count, int do_schedule, - int convertlf, int may_schedule) + int convertlf, int may_fail) { unsigned long flags; void *page; @@ -395,15 +391,14 @@ __sclp_vt220_write(const unsigned char *buf, int count, int do_schedule, overall_written = 0; spin_lock_irqsave(&sclp_vt220_lock, flags); do { - /* Create a sclp output buffer if none exists yet */ + /* Create an sclp output buffer if none exists yet */ if (sclp_vt220_current_request == NULL) { while (list_empty(&sclp_vt220_empty)) { spin_unlock_irqrestore(&sclp_vt220_lock, flags); - if (in_interrupt() || !may_schedule) - sclp_sync_wait(); + if (may_fail) + goto out; else - wait_event(sclp_vt220_waitq, - !list_empty(&sclp_vt220_empty)); + sclp_sync_wait(); spin_lock_irqsave(&sclp_vt220_lock, flags); } page = (void *) sclp_vt220_empty.next; @@ -437,6 +432,7 @@ __sclp_vt220_write(const unsigned char *buf, int count, int do_schedule, add_timer(&sclp_vt220_timer); } spin_unlock_irqrestore(&sclp_vt220_lock, flags); +out: return overall_written; } @@ -520,19 +516,11 @@ sclp_vt220_close(struct tty_struct *tty, struct file *filp) * character to the tty device. If the kernel uses this routine, * it must call the flush_chars() routine (if defined) when it is * done stuffing characters into the driver. - * - * NOTE: include/linux/tty_driver.h specifies that a character should be - * ignored if there is no room in the queue. This driver implements a different - * semantic in that it will block when there is no more room left. - * - * FIXME: putchar can currently be called from BH and other non blocking - * handlers so this semantic isn't a good idea. */ static int sclp_vt220_put_char(struct tty_struct *tty, unsigned char ch) { - __sclp_vt220_write(&ch, 1, 0, 0, 1); - return 1; + return __sclp_vt220_write(&ch, 1, 0, 0, 1); } /* @@ -653,7 +641,6 @@ static int __init __sclp_vt220_init(void) spin_lock_init(&sclp_vt220_lock); INIT_LIST_HEAD(&sclp_vt220_empty); INIT_LIST_HEAD(&sclp_vt220_outqueue); - init_waitqueue_head(&sclp_vt220_waitq); init_timer(&sclp_vt220_timer); sclp_vt220_current_request = NULL; sclp_vt220_buffered_chars = 0; -- cgit v1.2.3 From c80ee724966a8ce9a68020d9095233fb1c6f57e8 Mon Sep 17 00:00:00 2001 From: Stefan Haberland Date: Fri, 30 May 2008 10:03:31 +0200 Subject: [S390] dasd: use a generic wait_queue for sleep_on Use a generic wait_queue to prevent the wait_queue in dasd_sleep_on_ functions from being referenced by callback_data while it does not exist any more. Signed-off-by: Stefan Haberland Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 8ba3f135da2..1a402568336 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -63,6 +63,7 @@ static void dasd_return_cqr_cb(struct dasd_ccw_req *, void *); */ static wait_queue_head_t dasd_init_waitq; static wait_queue_head_t dasd_flush_wq; +static wait_queue_head_t generic_waitq; /* * Allocate memory for a new device structure. @@ -1151,11 +1152,15 @@ static void __dasd_device_process_final_queue(struct dasd_device *device, struct list_head *l, *n; struct dasd_ccw_req *cqr; struct dasd_block *block; + void (*callback)(struct dasd_ccw_req *, void *data); + void *callback_data; list_for_each_safe(l, n, final_queue) { cqr = list_entry(l, struct dasd_ccw_req, devlist); list_del_init(&cqr->devlist); block = cqr->block; + callback = cqr->callback; + callback_data = cqr->callback_data; if (block) spin_lock_bh(&block->queue_lock); switch (cqr->status) { @@ -1176,7 +1181,7 @@ static void __dasd_device_process_final_queue(struct dasd_device *device, BUG(); } if (cqr->callback != NULL) - (cqr->callback)(cqr, cqr->callback_data); + (callback)(cqr, callback_data); if (block) spin_unlock_bh(&block->queue_lock); } @@ -1406,17 +1411,15 @@ static inline int _wait_for_wakeup(struct dasd_ccw_req *cqr) */ int dasd_sleep_on(struct dasd_ccw_req *cqr) { - wait_queue_head_t wait_q; struct dasd_device *device; int rc; device = cqr->startdev; - init_waitqueue_head (&wait_q); cqr->callback = dasd_wakeup_cb; - cqr->callback_data = (void *) &wait_q; + cqr->callback_data = (void *) &generic_waitq; dasd_add_request_tail(cqr); - wait_event(wait_q, _wait_for_wakeup(cqr)); + wait_event(generic_waitq, _wait_for_wakeup(cqr)); /* Request status is either done or failed. */ rc = (cqr->status == DASD_CQR_DONE) ? 0 : -EIO; @@ -1429,20 +1432,18 @@ int dasd_sleep_on(struct dasd_ccw_req *cqr) */ int dasd_sleep_on_interruptible(struct dasd_ccw_req *cqr) { - wait_queue_head_t wait_q; struct dasd_device *device; int rc; device = cqr->startdev; - init_waitqueue_head (&wait_q); cqr->callback = dasd_wakeup_cb; - cqr->callback_data = (void *) &wait_q; + cqr->callback_data = (void *) &generic_waitq; dasd_add_request_tail(cqr); - rc = wait_event_interruptible(wait_q, _wait_for_wakeup(cqr)); + rc = wait_event_interruptible(generic_waitq, _wait_for_wakeup(cqr)); if (rc == -ERESTARTSYS) { dasd_cancel_req(cqr); /* wait (non-interruptible) for final status */ - wait_event(wait_q, _wait_for_wakeup(cqr)); + wait_event(generic_waitq, _wait_for_wakeup(cqr)); } rc = (cqr->status == DASD_CQR_DONE) ? 0 : -EIO; return rc; @@ -1466,7 +1467,6 @@ static inline int _dasd_term_running_cqr(struct dasd_device *device) int dasd_sleep_on_immediatly(struct dasd_ccw_req *cqr) { - wait_queue_head_t wait_q; struct dasd_device *device; int rc; @@ -1478,9 +1478,8 @@ int dasd_sleep_on_immediatly(struct dasd_ccw_req *cqr) return rc; } - init_waitqueue_head (&wait_q); cqr->callback = dasd_wakeup_cb; - cqr->callback_data = (void *) &wait_q; + cqr->callback_data = (void *) &generic_waitq; cqr->status = DASD_CQR_QUEUED; list_add(&cqr->devlist, &device->ccw_queue); @@ -1489,7 +1488,7 @@ int dasd_sleep_on_immediatly(struct dasd_ccw_req *cqr) spin_unlock_irq(get_ccwdev_lock(device->cdev)); - wait_event(wait_q, _wait_for_wakeup(cqr)); + wait_event(generic_waitq, _wait_for_wakeup(cqr)); /* Request status is either done or failed. */ rc = (cqr->status == DASD_CQR_DONE) ? 0 : -EIO; @@ -2430,6 +2429,7 @@ static int __init dasd_init(void) init_waitqueue_head(&dasd_init_waitq); init_waitqueue_head(&dasd_flush_wq); + init_waitqueue_head(&generic_waitq); /* register 'common' DASD debug area, used for all DBF_XXX calls */ dasd_debug_area = debug_register("dasd", 1, 1, 8 * sizeof(long)); -- cgit v1.2.3 From 54ad64129cc166b9eec7151f3f9fc83589e33555 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 30 May 2008 10:03:32 +0200 Subject: [S390] 3270: fix race with stack local wait_queue_head_t. A wait_event call with a stack local wait_queue_head_t structure that is used to do the wake up for the wait_event is inherently racy. After the wait_event finished the wake_up call might not have completed yet. Remove the stack local wait_queue_head_t from raw3270_start_init and use the global raw3270_wait_queue instead. Signed-off-by: Martin Schwidefsky --- drivers/s390/char/raw3270.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c index 0d98f1ff2ed..848ef7e8523 100644 --- a/drivers/s390/char/raw3270.c +++ b/drivers/s390/char/raw3270.c @@ -549,7 +549,6 @@ raw3270_start_init(struct raw3270 *rp, struct raw3270_view *view, struct raw3270_request *rq) { unsigned long flags; - wait_queue_head_t wq; int rc; #ifdef CONFIG_TN3270_CONSOLE @@ -566,20 +565,20 @@ raw3270_start_init(struct raw3270 *rp, struct raw3270_view *view, return rq->rc; } #endif - init_waitqueue_head(&wq); rq->callback = raw3270_wake_init; - rq->callback_data = &wq; + rq->callback_data = &raw3270_wait_queue; spin_lock_irqsave(get_ccwdev_lock(view->dev->cdev), flags); rc = __raw3270_start(rp, view, rq); spin_unlock_irqrestore(get_ccwdev_lock(view->dev->cdev), flags); if (rc) return rc; /* Now wait for the completion. */ - rc = wait_event_interruptible(wq, raw3270_request_final(rq)); + rc = wait_event_interruptible(raw3270_wait_queue, + raw3270_request_final(rq)); if (rc == -ERESTARTSYS) { /* Interrupted by a signal. */ raw3270_halt_io(view->dev, rq); /* No wait for the halt to complete. */ - wait_event(wq, raw3270_request_final(rq)); + wait_event(raw3270_wait_queue, raw3270_request_final(rq)); return -ERESTARTSYS; } return rq->rc; -- cgit v1.2.3 From 4657fb8a98a4e02981a574492bbe470c147b6657 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 30 May 2008 10:03:33 +0200 Subject: [S390] tape: fix race with stack local wait_queue_head_t. A wait_event call with a stack local wait_queue_head_t structure that is used to do the wake up for the wait_event is inherently racy. After the wait_event finished the wake_up call might not have completed yet. Replace the stack local wait_queue_head_t in tape_do_io and tape_do_io_interruptible with a per device wait queue. Signed-off-by: Martin Schwidefsky --- drivers/s390/char/tape.h | 3 +++ drivers/s390/char/tape_core.c | 16 +++++++--------- 2 files changed, 10 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/char/tape.h b/drivers/s390/char/tape.h index dddf8d62c15..d0d565a05df 100644 --- a/drivers/s390/char/tape.h +++ b/drivers/s390/char/tape.h @@ -231,6 +231,9 @@ struct tape_device { /* Request queue. */ struct list_head req_queue; + /* Request wait queue. */ + wait_queue_head_t wait_queue; + /* Each tape device has (currently) two minor numbers. */ int first_minor; diff --git a/drivers/s390/char/tape_core.c b/drivers/s390/char/tape_core.c index 76e44eb7c47..c20e3c54834 100644 --- a/drivers/s390/char/tape_core.c +++ b/drivers/s390/char/tape_core.c @@ -449,6 +449,7 @@ tape_alloc_device(void) INIT_LIST_HEAD(&device->req_queue); INIT_LIST_HEAD(&device->node); init_waitqueue_head(&device->state_change_wq); + init_waitqueue_head(&device->wait_queue); device->tape_state = TS_INIT; device->medium_state = MS_UNKNOWN; *device->modeset_byte = 0; @@ -954,21 +955,19 @@ __tape_wake_up(struct tape_request *request, void *data) int tape_do_io(struct tape_device *device, struct tape_request *request) { - wait_queue_head_t wq; int rc; - init_waitqueue_head(&wq); spin_lock_irq(get_ccwdev_lock(device->cdev)); /* Setup callback */ request->callback = __tape_wake_up; - request->callback_data = &wq; + request->callback_data = &device->wait_queue; /* Add request to request queue and try to start it. */ rc = __tape_start_request(device, request); spin_unlock_irq(get_ccwdev_lock(device->cdev)); if (rc) return rc; /* Request added to the queue. Wait for its completion. */ - wait_event(wq, (request->callback == NULL)); + wait_event(device->wait_queue, (request->callback == NULL)); /* Get rc from request */ return request->rc; } @@ -989,20 +988,19 @@ int tape_do_io_interruptible(struct tape_device *device, struct tape_request *request) { - wait_queue_head_t wq; int rc; - init_waitqueue_head(&wq); spin_lock_irq(get_ccwdev_lock(device->cdev)); /* Setup callback */ request->callback = __tape_wake_up_interruptible; - request->callback_data = &wq; + request->callback_data = &device->wait_queue; rc = __tape_start_request(device, request); spin_unlock_irq(get_ccwdev_lock(device->cdev)); if (rc) return rc; /* Request added to the queue. Wait for its completion. */ - rc = wait_event_interruptible(wq, (request->callback == NULL)); + rc = wait_event_interruptible(device->wait_queue, + (request->callback == NULL)); if (rc != -ERESTARTSYS) /* Request finished normally. */ return request->rc; @@ -1015,7 +1013,7 @@ tape_do_io_interruptible(struct tape_device *device, /* Wait for the interrupt that acknowledges the halt. */ do { rc = wait_event_interruptible( - wq, + device->wait_queue, (request->callback == NULL) ); } while (rc == -ERESTARTSYS); -- cgit v1.2.3 From 501a5250589be41c4c060afa855bc60b4539a340 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 30 May 2008 10:40:28 -0400 Subject: Input: gtco - fix double kfree in error handling path The code would try to free 'report' twice upon input_register_device() failure. Reported-by: Julia Lawall Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/gtco.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/input/tablet/gtco.c b/drivers/input/tablet/gtco.c index c5a8661a1ba..1e748e46d12 100644 --- a/drivers/input/tablet/gtco.c +++ b/drivers/input/tablet/gtco.c @@ -830,7 +830,7 @@ static int gtco_probe(struct usb_interface *usbinterface, struct gtco *gtco; struct input_dev *input_dev; struct hid_descriptor *hid_desc; - char *report = NULL; + char *report; int result = 0, retry; int error; struct usb_endpoint_descriptor *endpoint; @@ -916,12 +916,16 @@ static int gtco_probe(struct usb_interface *usbinterface, le16_to_cpu(hid_desc->wDescriptorLength), 5000); /* 5 secs */ - if (result == le16_to_cpu(hid_desc->wDescriptorLength)) + dbg("usb_control_msg result: %d", result); + if (result == le16_to_cpu(hid_desc->wDescriptorLength)) { + parse_hid_report_descriptor(gtco, report, result); break; + } } + kfree(report); + /* If we didn't get the report, fail */ - dbg("usb_control_msg result: :%d", result); if (result != le16_to_cpu(hid_desc->wDescriptorLength)) { err("Failed to get HID Report Descriptor of size: %d", hid_desc->wDescriptorLength); @@ -929,12 +933,6 @@ static int gtco_probe(struct usb_interface *usbinterface, goto err_free_urb; } - /* Now we parse the report */ - parse_hid_report_descriptor(gtco, report, result); - - /* Now we delete it */ - kfree(report); - /* Create a device file node */ usb_make_path(gtco->usbdev, gtco->usbpath, sizeof(gtco->usbpath)); strlcat(gtco->usbpath, "/input0", sizeof(gtco->usbpath)); @@ -988,7 +986,6 @@ static int gtco_probe(struct usb_interface *usbinterface, usb_buffer_free(gtco->usbdev, REPORT_MAX_SIZE, gtco->buffer, gtco->buf_dma); err_free_devs: - kfree(report); input_free_device(input_dev); kfree(gtco); return error; -- cgit v1.2.3 From e3aa51fecdc941c859ed0515084323d3f997aa4a Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Thu, 29 May 2008 17:51:57 -0700 Subject: acpi: fix sparse const errors In this case we want a constant pointer to constant chars: drivers/misc/thinkpad_acpi.c:3824:19: error: Just how const do you want this type to be? Like the error says. drivers/misc/thinkpad_acpi.c:3863:19: error: Just how const do you want this type to be? drivers/misc/thinkpad_acpi.c:3864:19: error: Just how const do you want this type to be? drivers/misc/thinkpad_acpi.c:3865:19: error: Just how const do you want this type to be? drivers/misc/thinkpad_acpi.c:3866:19: error: Just how const do you want this type to be? Signed-off-by: Harvey Harrison Acked-by: Henrique de Moraes Holschuh Signed-off-by: Linus Torvalds --- drivers/misc/thinkpad_acpi.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index 3f28f6eabdb..a0ce0b2fa03 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -3821,7 +3821,7 @@ TPACPI_HANDLE(led, ec, "SLED", /* 570 */ #define TPACPI_LED_NUMLEDS 8 static struct tpacpi_led_classdev *tpacpi_leds; static enum led_status_t tpacpi_led_state_cache[TPACPI_LED_NUMLEDS]; -static const char const *tpacpi_led_names[TPACPI_LED_NUMLEDS] = { +static const char * const tpacpi_led_names[TPACPI_LED_NUMLEDS] = { /* there's a limit of 19 chars + NULL before 2.6.26 */ "tpacpi::power", "tpacpi:orange:batt", @@ -3860,10 +3860,10 @@ static int led_get_status(unsigned int led) static int led_set_status(unsigned int led, enum led_status_t ledstatus) { /* off, on, blink. Index is led_status_t */ - static const int const led_sled_arg1[] = { 0, 1, 3 }; - static const int const led_exp_hlbl[] = { 0, 0, 1 }; /* led# * */ - static const int const led_exp_hlcl[] = { 0, 1, 1 }; /* led# * */ - static const int const led_led_arg1[] = { 0, 0x80, 0xc0 }; + static const int led_sled_arg1[] = { 0, 1, 3 }; + static const int led_exp_hlbl[] = { 0, 0, 1 }; /* led# * */ + static const int led_exp_hlcl[] = { 0, 1, 1 }; /* led# * */ + static const int led_led_arg1[] = { 0, 0x80, 0xc0 }; int rc = 0; -- cgit v1.2.3 From 1f39847255a02c69190ae30c33b8ccf4c10840df Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Tue, 27 May 2008 17:54:48 -0400 Subject: sata_mv: move SOC_FLAG to hpriv Convert the System-on-Chip flag from a host flag to an hpriv flag, for better consistency with other chip-rev flags, and for easier use in errata fixes etc. Also change the related "HAS_PCI()" into "!IS_SOC()" for better consistency of naming/use (everything else SOC-related already uses "SOC"). There are no functionality changes in this patch. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 27 +++++++++++++-------------- 1 file changed, 13 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index fb81f0c7a8c..f6a716ef5a1 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -122,8 +122,6 @@ enum { /* Host Flags */ MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */ MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */ - /* SoC integrated controllers, no PCI interface */ - MV_FLAG_SOC = (1 << 28), MV_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI | @@ -362,6 +360,7 @@ enum { MV_HP_GEN_IIE = (1 << 8), /* Generation IIE: 6042/7042 */ MV_HP_PCIE = (1 << 9), /* PCIe bus/regs: 7042 */ MV_HP_CUT_THROUGH = (1 << 10), /* can use EDMA cut-through */ + MV_HP_FLAG_SOC = (1 << 11), /* SystemOnChip, no PCI */ /* Port private flags (pp_flags) */ MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */ @@ -374,7 +373,7 @@ enum { #define IS_GEN_II(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_II) #define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE) #define IS_PCIE(hpriv) ((hpriv)->hp_flags & MV_HP_PCIE) -#define HAS_PCI(host) (!((host)->ports[0]->flags & MV_FLAG_SOC)) +#define IS_SOC(hpriv) ((hpriv)->hp_flags & MV_HP_FLAG_SOC) #define WINDOW_CTRL(i) (0x20030 + ((i) << 4)) #define WINDOW_BASE(i) (0x20034 + ((i) << 4)) @@ -652,7 +651,7 @@ static const struct ata_port_info mv_port_info[] = { .port_ops = &mv_iie_ops, }, { /* chip_soc */ - .flags = MV_GENIIE_FLAGS | MV_FLAG_SOC, + .flags = MV_GENIIE_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv_iie_ops, @@ -1254,7 +1253,7 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq) cfg |= (1 << 23); /* do not mask PM field in rx'd FIS */ cfg |= (1 << 22); /* enab 4-entry host queue cache */ - if (HAS_PCI(ap->host)) + if (!IS_SOC(hpriv)) cfg |= (1 << 18); /* enab early completion */ if (hpriv->hp_flags & MV_HP_CUT_THROUGH) cfg |= (1 << 17); /* enab cut-thru (dis stor&forwrd) */ @@ -2225,7 +2224,7 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance) * a bogus register value which can indicate HW removal or PCI fault. */ if (pending_irqs && main_irq_cause != 0xffffffffU) { - if (unlikely((pending_irqs & PCI_ERR) && HAS_PCI(host))) + if (unlikely((pending_irqs & PCI_ERR) && !IS_SOC(hpriv))) handled = mv_pci_error(host, hpriv->base); else handled = mv_host_intr(host, pending_irqs); @@ -2876,7 +2875,7 @@ static unsigned int mv_in_pcix_mode(struct ata_host *host) void __iomem *mmio = hpriv->base; u32 reg; - if (!HAS_PCI(host) || !IS_PCIE(hpriv)) + if (IS_SOC(hpriv) || !IS_PCIE(hpriv)) return 0; /* not PCI-X capable */ reg = readl(mmio + MV_PCI_MODE_OFS); if ((reg & MV_PCI_MODE_MASK) == 0) @@ -3018,7 +3017,7 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx) break; case chip_soc: hpriv->ops = &mv_soc_ops; - hp_flags |= MV_HP_ERRATA_60X1C0; + hp_flags |= MV_HP_FLAG_SOC | MV_HP_ERRATA_60X1C0; break; default: @@ -3062,12 +3061,12 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) if (rc) goto done; - if (HAS_PCI(host)) { - hpriv->main_irq_cause_addr = mmio + PCI_HC_MAIN_IRQ_CAUSE_OFS; - hpriv->main_irq_mask_addr = mmio + PCI_HC_MAIN_IRQ_MASK_OFS; - } else { + if (IS_SOC(hpriv)) { hpriv->main_irq_cause_addr = mmio + SOC_HC_MAIN_IRQ_CAUSE_OFS; hpriv->main_irq_mask_addr = mmio + SOC_HC_MAIN_IRQ_MASK_OFS; + } else { + hpriv->main_irq_cause_addr = mmio + PCI_HC_MAIN_IRQ_CAUSE_OFS; + hpriv->main_irq_mask_addr = mmio + PCI_HC_MAIN_IRQ_MASK_OFS; } /* global interrupt mask: 0 == mask everything */ @@ -3093,7 +3092,7 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) mv_port_init(&ap->ioaddr, port_mmio); #ifdef CONFIG_PCI - if (HAS_PCI(host)) { + if (!IS_SOC(hpriv)) { unsigned int offset = port_mmio - mmio; ata_port_pbar_desc(ap, MV_PRIMARY_BAR, -1, "mmio"); ata_port_pbar_desc(ap, MV_PRIMARY_BAR, offset, "port"); @@ -3113,7 +3112,7 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS); } - if (HAS_PCI(host)) { + if (!IS_SOC(hpriv)) { /* Clear any currently outstanding host interrupt conditions */ writelfl(0, mmio + hpriv->irq_cause_ofs); -- cgit v1.2.3 From 8c30a8b9b574cf6c51e207464b852a6f559da153 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Tue, 27 May 2008 17:56:31 -0400 Subject: sata_mv: PHY_MODEx errata fixes Fix and update the errata handling for the PHY_MODEx registers. This improves receiver noise tolerance, among other things. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index f6a716ef5a1..a39779aed8f 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -2546,7 +2546,7 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0); int fix_phy_mode4 = hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0); - u32 m2, tmp; + u32 m2, m3; if (fix_phy_mode2) { m2 = readl(port_mmio + PHY_MODE2); @@ -2563,27 +2563,27 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, udelay(200); } - /* who knows what this magic does */ - tmp = readl(port_mmio + PHY_MODE3); - tmp &= ~0x7F800000; - tmp |= 0x2A800000; - writel(tmp, port_mmio + PHY_MODE3); + /* + * Gen-II/IIe PHY_MODE3 errata RM#2: + * Achieves better receiver noise performance than the h/w default: + */ + m3 = readl(port_mmio + PHY_MODE3); + m3 = (m3 & 0x1f) | (0x5555601 << 5); + writel(m3, port_mmio + PHY_MODE3); if (fix_phy_mode4) { u32 m4; m4 = readl(port_mmio + PHY_MODE4); - if (hp_flags & MV_HP_ERRATA_60X1B2) - tmp = readl(port_mmio + PHY_MODE3); - /* workaround for errata FEr SATA#10 (part 1) */ m4 = (m4 & ~(1 << 1)) | (1 << 0); - writel(m4, port_mmio + PHY_MODE4); + /* enforce bit restrictions on GenIIe devices */ + if (IS_GEN_IIE(hpriv)) + m4 = (m4 & ~0x5DE3FFFC) | (1 << 2); - if (hp_flags & MV_HP_ERRATA_60X1B2) - writel(tmp, port_mmio + PHY_MODE3); + writel(m4, port_mmio + PHY_MODE4); } /* Revert values of pre-emphasis and signal amps to the saved ones */ -- cgit v1.2.3 From 5cf73bfb061552aa18d816d2859409be9ace5306 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Tue, 27 May 2008 17:58:56 -0400 Subject: sata_mv: nuke unreleased GenIIe revisions The only public release of the 6042/7042 chips was/is revision "B0". Remove code that attempted to deal with earlier, non-released revs. This matches the logic of the current Marvell "proprietary" driver. Also, bump up the sata_mv version number, to reflect this batch of erratas. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 23 ++++------------------- 1 file changed, 4 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index a39779aed8f..969a7698778 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -72,7 +72,7 @@ #include #define DRV_NAME "sata_mv" -#define DRV_VERSION "1.21" +#define DRV_VERSION "1.22" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -354,7 +354,6 @@ enum { MV_HP_ERRATA_50XXB2 = (1 << 2), MV_HP_ERRATA_60X1B2 = (1 << 3), MV_HP_ERRATA_60X1C0 = (1 << 4), - MV_HP_ERRATA_XX42A0 = (1 << 5), MV_HP_GEN_I = (1 << 6), /* Generation I: 50xx */ MV_HP_GEN_II = (1 << 7), /* Generation II: 60xx */ MV_HP_GEN_IIE = (1 << 8), /* Generation IIE: 6042/7042 */ @@ -811,12 +810,7 @@ static void mv_set_edma_ptrs(void __iomem *port_mmio, writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS); writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | index, port_mmio + EDMA_REQ_Q_IN_PTR_OFS); - - if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0) - writelfl((pp->crqb_dma & 0xffffffff) | index, - port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); - else - writelfl(index, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); + writelfl(index, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); /* * initialize response queue @@ -826,13 +820,7 @@ static void mv_set_edma_ptrs(void __iomem *port_mmio, WARN_ON(pp->crpb_dma & 0xff); writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS); - - if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0) - writelfl((pp->crpb_dma & 0xffffffff) | index, - port_mmio + EDMA_RSP_Q_IN_PTR_OFS); - else - writelfl(index, port_mmio + EDMA_RSP_Q_IN_PTR_OFS); - + writelfl(index, port_mmio + EDMA_RSP_Q_IN_PTR_OFS); writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) | index, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); } @@ -3002,10 +2990,7 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx) hp_flags |= MV_HP_CUT_THROUGH; switch (pdev->revision) { - case 0x0: - hp_flags |= MV_HP_ERRATA_XX42A0; - break; - case 0x1: + case 0x2: /* Rev.B0: the first/only public release */ hp_flags |= MV_HP_ERRATA_60X1C0; break; default: -- cgit v1.2.3 From b406c7a6655da7a2fcd9f72e41262f93ff707748 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 28 May 2008 12:01:12 -0400 Subject: sata_mv: workaround for 60x1 errata sata13 The "B2" variant of the 6041/6081 (genII) chips requires that the PHY_MODE3 register be rewritten after any write to PHY_MODE4. This fixes a regression introduced by an earlier patch. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 969a7698778..17093e600d8 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -72,7 +72,7 @@ #include #define DRV_NAME "sata_mv" -#define DRV_VERSION "1.22" +#define DRV_VERSION "1.23" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -2557,7 +2557,6 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, */ m3 = readl(port_mmio + PHY_MODE3); m3 = (m3 & 0x1f) | (0x5555601 << 5); - writel(m3, port_mmio + PHY_MODE3); if (fix_phy_mode4) { u32 m4; @@ -2573,6 +2572,12 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, writel(m4, port_mmio + PHY_MODE4); } + /* + * Workaround for 60x1-B2 errata SATA#13: + * Any write to PHY_MODE4 (above) may corrupt PHY_MODE3, + * so we must always rewrite PHY_MODE3 after PHY_MODE4. + */ + writel(m3, port_mmio + PHY_MODE3); /* Revert values of pre-emphasis and signal amps to the saved ones */ m2 = readl(port_mmio + PHY_MODE2); -- cgit v1.2.3 From 0388a8c0d54aa039758a8eca68d82325a563f8db Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 28 May 2008 13:41:52 -0400 Subject: sata_mv: implement SoC guideline SATA_S11 The 5182 System-On-Chip (SOC) variant wants certain lower bits to be cleared on any write to the PHY_MODE3 register. If/when support is added for other SOC variants, we'll need some way to uniquely identify the 5182, and not perform this workaround for the others. But for now, it is the only SOC variant we support here. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 17093e600d8..acf347f71a2 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -72,7 +72,7 @@ #include #define DRV_NAME "sata_mv" -#define DRV_VERSION "1.23" +#define DRV_VERSION "1.24" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -2558,6 +2558,10 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, m3 = readl(port_mmio + PHY_MODE3); m3 = (m3 & 0x1f) | (0x5555601 << 5); + /* Guideline 88F5182 (GL# SATA-S11) */ + if (IS_SOC(hpriv)) + m3 &= ~0x1c; + if (fix_phy_mode4) { u32 m4; -- cgit v1.2.3 From 23cf296e3b047da46112eb6b4dc89917c93c8f19 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 29 May 2008 22:04:22 +0900 Subject: ata_piix: fix macbook ich8m problems ICH8M on macbooks are peculiar in that some of them lock up when the second port is enabled, some return bogus values on SIDPR access while yet others hang on SIDPR access. Also, the ich8m_apple_sata entry was wrongly added below generic ich8m entry making it virtually useless. This patch works around macbook ich8m problems by * moving ich8m_apple_sata entry above generic ich8m entry * dropping PIIX_FLAG_SIDPR from ich8m_apple_sata * adding subsystem 106b:00a1 as ich8m_apple_sata Reported and tested by MATSUBAYASHI. Signed-off-by: Tejun Heo Cc: MATSUBAYASHI 'Shaolin' Kohji Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index a9027b8fbdd..3548ee7014c 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -247,10 +247,11 @@ static const struct pci_device_id piix_pci_tbl[] = { { 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, /* SATA Controller 2 IDE (ICH8) */ { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, - /* Mobile SATA Controller IDE (ICH8M) */ - { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, /* Mobile SATA Controller IDE (ICH8M), Apple */ { 0x8086, 0x2828, 0x106b, 0x00a0, 0, 0, ich8m_apple_sata }, + { 0x8086, 0x2828, 0x106b, 0x00a1, 0, 0, ich8m_apple_sata }, + /* Mobile SATA Controller IDE (ICH8M) */ + { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, /* SATA Controller IDE (ICH9) */ { 0x8086, 0x2920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, /* SATA Controller IDE (ICH9) */ @@ -526,7 +527,7 @@ static struct ata_port_info piix_port_info[] = { [ich8m_apple_sata] = { - .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR, + .flags = PIIX_SATA_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = ATA_UDMA6, -- cgit v1.2.3 From 2da676594a73825f10d2a99358cc7465119684f9 Mon Sep 17 00:00:00 2001 From: Pradeep Singh Rautela Date: Thu, 29 May 2008 23:28:14 +0530 Subject: ata: Convert to static DEFINE_SPINLOCK(lock) Replace deprecated static spinlock_t instance to static DEFINE_SPINLOCK(lock). Signed-off-by: Pradeep Singh Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 3c89f205c83..cc816ca623d 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -5403,7 +5403,7 @@ static void ata_host_stop(struct device *gendev, void *res) */ static void ata_finalize_port_ops(struct ata_port_operations *ops) { - static spinlock_t lock = SPIN_LOCK_UNLOCKED; + static DEFINE_SPINLOCK(lock); const struct ata_port_operations *cur; void **begin = (void **)ops; void **end = (void **)&ops->inherits; -- cgit v1.2.3 From ec2a20e61974f7c9ebe6dd99ac479ec309a750bc Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 30 Apr 2008 12:57:00 -0700 Subject: libata: fix libata-scsi kernel-doc notation Fix libata-scsi kernel-doc notation: Warning(linux-2.6.25-git15//drivers/ata/libata-scsi.c:1659): No description found for parameter 'cmd' Warning(linux-2.6.25-git15//drivers/ata/libata-scsi.c:1971): No description found for parameter 'buf' Signed-off-by: Randy Dunlap Signed-off-by: Jeff Garzik --- drivers/ata/libata-scsi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index aeb6e01d82c..2e6e1622dc6 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1637,6 +1637,7 @@ defer: /** * ata_scsi_rbuf_get - Map response buffer. + * @cmd: SCSI command containing buffer to be mapped. * @flags: unsigned long variable to store irq enable status * @copy_in: copy in from user buffer * @@ -1954,7 +1955,7 @@ static unsigned int ata_msense_ctl_mode(u8 *buf) /** * ata_msense_rw_recovery - Simulate MODE SENSE r/w error recovery page - * @bufp: output buffer + * @buf: output buffer * * Generate a generic MODE SENSE r/w error recovery page. * -- cgit v1.2.3 From 19ef9d5e45ce805700f34c248a71a511877b8a5d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 21 May 2008 14:11:24 +0900 Subject: libata: SRST can't be trusted on PMP sil3726 As in sil4726, SRST can't be trusted on sil3726 causing detection problems under certain configuraitons. I thought it was from the Config Disk device but apparently not. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-pmp.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c index 0f9386d4a5a..7daf4c0f621 100644 --- a/drivers/ata/libata-pmp.c +++ b/drivers/ata/libata-pmp.c @@ -322,9 +322,12 @@ static void sata_pmp_quirks(struct ata_port *ap) if (vendor == 0x1095 && devid == 0x3726) { /* sil3726 quirks */ ata_port_for_each_link(link, ap) { - /* class code report is unreliable */ + /* Class code report is unreliable and SRST + * times out under certain configurations. + */ if (link->pmp < 5) - link->flags |= ATA_LFLAG_ASSUME_ATA; + link->flags |= ATA_LFLAG_NO_SRST | + ATA_LFLAG_ASSUME_ATA; /* port 5 is for SEMB device and it doesn't like SRST */ if (link->pmp == 5) -- cgit v1.2.3 From 034d8e8f273fcb02bebd6a62d8023ffa409fe92f Mon Sep 17 00:00:00 2001 From: Ashish Kalra Date: Tue, 20 May 2008 00:19:45 -0500 Subject: [libata] sata_fsl: Fix broken driver, add port multiplier (PMP) support The following commit (4c9bf4e799ce06a7378f1196587084802a414c03): libata: replace tf_read with qc_fill_rtf for non-SFF drivers Broke the sata_fsl.c driver in 2.6.26-rc. I know the following patch fixes the issue, it clearly also adds port multipler support. The current 2.6.26-rc driver is broken. On boot with debug enabled we get something like (w/o this patch): spurious interrupt!!, CC = 0x1 interrupt status 0x1 xx_scr_read, reg_in = 1 spurious interrupt!!, CC = 0x1 interrupt status 0x1 xx_scr_read, reg_in = 1 spurious interrupt!!, CC = 0x1 interrupt status 0x1 xx_scr_read, reg_in = 1 .. continues for ever. This change fixes this as a side effect of adding port multiplier support. Signed-off-by: Ashish Kalra Signed-off-by: Jeff Garzik --- drivers/ata/sata_fsl.c | 224 +++++++++++++++++++++++++++++++++++-------------- 1 file changed, 163 insertions(+), 61 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index 853559e3231..3924e7209a4 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -34,7 +34,7 @@ enum { SATA_FSL_HOST_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | - ATA_FLAG_NCQ), + ATA_FLAG_PMP | ATA_FLAG_NCQ), SATA_FSL_MAX_CMDS = SATA_FSL_QUEUE_DEPTH, SATA_FSL_CMD_HDR_SIZE = 16, /* 4 DWORDS */ @@ -395,7 +395,7 @@ static void sata_fsl_qc_prep(struct ata_queued_cmd *qc) cd = (struct command_desc *)pp->cmdentry + tag; cd_paddr = pp->cmdentry_paddr + tag * SATA_FSL_CMD_DESC_SIZE; - ata_tf_to_fis(&qc->tf, 0, 1, (u8 *) &cd->cfis); + ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, (u8 *) &cd->cfis); VPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x\n", cd->cfis[0], cd->cfis[1], cd->cfis[2]); @@ -438,6 +438,8 @@ static unsigned int sata_fsl_qc_issue(struct ata_queued_cmd *qc) ioread32(CA + hcr_base), ioread32(CE + hcr_base), ioread32(CC + hcr_base)); + iowrite32(qc->dev->link->pmp, CQPMP + hcr_base); + /* Simply queue command to the controller/device */ iowrite32(1 << tag, CQ + hcr_base); @@ -558,11 +560,36 @@ static void sata_fsl_thaw(struct ata_port *ap) ioread32(hcr_base + HCONTROL), ioread32(hcr_base + HSTATUS)); } +static void sata_fsl_pmp_attach(struct ata_port *ap) +{ + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + u32 temp; + + temp = ioread32(hcr_base + HCONTROL); + iowrite32((temp | HCONTROL_PMP_ATTACHED), hcr_base + HCONTROL); +} + +static void sata_fsl_pmp_detach(struct ata_port *ap) +{ + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + u32 temp; + + temp = ioread32(hcr_base + HCONTROL); + temp &= ~HCONTROL_PMP_ATTACHED; + iowrite32(temp, hcr_base + HCONTROL); + + /* enable interrupts on the controller/port */ + temp = ioread32(hcr_base + HCONTROL); + iowrite32((temp | DEFAULT_PORT_IRQ_ENABLE_MASK), hcr_base + HCONTROL); + +} + static int sata_fsl_port_start(struct ata_port *ap) { struct device *dev = ap->host->dev; struct sata_fsl_port_priv *pp; - int retval; void *mem; dma_addr_t mem_dma; struct sata_fsl_host_priv *host_priv = ap->host->private_data; @@ -688,12 +715,13 @@ static int sata_fsl_prereset(struct ata_link *link, unsigned long deadline) } static int sata_fsl_softreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) + unsigned long deadline) { struct ata_port *ap = link->ap; struct sata_fsl_port_priv *pp = ap->private_data; struct sata_fsl_host_priv *host_priv = ap->host->private_data; void __iomem *hcr_base = host_priv->hcr_base; + int pmp = sata_srst_pmp(link); u32 temp; struct ata_taskfile tf; u8 *cfis; @@ -703,6 +731,9 @@ static int sata_fsl_softreset(struct ata_link *link, unsigned int *class, DPRINTK("in xx_softreset\n"); + if (pmp != SATA_PMP_CTRL_PORT) + goto issue_srst; + try_offline_again: /* * Force host controller to go off-line, aborting current operations @@ -746,6 +777,7 @@ try_offline_again: temp = ioread32(hcr_base + HCONTROL); temp |= (HCONTROL_ONLINE_PHY_RST | HCONTROL_SNOOP_ENABLE); + temp |= HCONTROL_PMP_ATTACHED; iowrite32(temp, hcr_base + HCONTROL); temp = ata_wait_register(hcr_base + HSTATUS, ONLINE, 0, 1, 500); @@ -771,7 +803,8 @@ try_offline_again: ata_port_printk(ap, KERN_WARNING, "No Device OR PHYRDY change,Hstatus = 0x%x\n", ioread32(hcr_base + HSTATUS)); - goto err; + *class = ATA_DEV_NONE; + goto out; } /* @@ -783,7 +816,8 @@ try_offline_again: if ((temp & 0xFF) != 0x18) { ata_port_printk(ap, KERN_WARNING, "No Signature Update\n"); - goto err; + *class = ATA_DEV_NONE; + goto out; } else { ata_port_printk(ap, KERN_INFO, "Signature Update detected @ %d msecs\n", @@ -798,6 +832,7 @@ try_offline_again: * reached here, we can send a command to the target device */ +issue_srst: DPRINTK("Sending SRST/device reset\n"); ata_tf_init(link->device, &tf); @@ -808,7 +843,7 @@ try_offline_again: SRST_CMD | CMD_DESC_SNOOP_ENABLE, 0, 0, 5); tf.ctl |= ATA_SRST; /* setup SRST bit in taskfile control reg */ - ata_tf_to_fis(&tf, 0, 0, cfis); + ata_tf_to_fis(&tf, pmp, 0, cfis); DPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x, 0x%x\n", cfis[0], cfis[1], cfis[2], cfis[3]); @@ -854,8 +889,10 @@ try_offline_again: sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_SNOOP_ENABLE, 0, 0, 5); tf.ctl &= ~ATA_SRST; /* 2nd H2D Ctl. register FIS */ - ata_tf_to_fis(&tf, 0, 0, cfis); + ata_tf_to_fis(&tf, pmp, 0, cfis); + if (pmp != SATA_PMP_CTRL_PORT) + iowrite32(pmp, CQPMP + hcr_base); iowrite32(1, CQ + hcr_base); msleep(150); /* ?? */ @@ -886,12 +923,21 @@ try_offline_again: VPRINTK("cereg = 0x%x\n", ioread32(hcr_base + CE)); } +out: return 0; err: return -EIO; } +static void sata_fsl_error_handler(struct ata_port *ap) +{ + + DPRINTK("in xx_error_handler\n"); + sata_pmp_error_handler(ap); + +} + static void sata_fsl_post_internal_cmd(struct ata_queued_cmd *qc) { if (qc->flags & ATA_QCFLAG_FAILED) @@ -905,18 +951,21 @@ static void sata_fsl_post_internal_cmd(struct ata_queued_cmd *qc) static void sata_fsl_error_intr(struct ata_port *ap) { - struct ata_link *link = &ap->link; - struct ata_eh_info *ehi = &link->eh_info; struct sata_fsl_host_priv *host_priv = ap->host->private_data; void __iomem *hcr_base = host_priv->hcr_base; - u32 hstatus, dereg, cereg = 0, SError = 0; + u32 hstatus, dereg=0, cereg = 0, SError = 0; unsigned int err_mask = 0, action = 0; - struct ata_queued_cmd *qc; - int freeze = 0; + int freeze = 0, abort=0; + struct ata_link *link = NULL; + struct ata_queued_cmd *qc = NULL; + struct ata_eh_info *ehi; hstatus = ioread32(hcr_base + HSTATUS); cereg = ioread32(hcr_base + CE); + /* first, analyze and record host port events */ + link = &ap->link; + ehi = &link->eh_info; ata_ehi_clear_desc(ehi); /* @@ -926,42 +975,28 @@ static void sata_fsl_error_intr(struct ata_port *ap) sata_fsl_scr_read(ap, SCR_ERROR, &SError); if (unlikely(SError & 0xFFFF0000)) { sata_fsl_scr_write(ap, SCR_ERROR, SError); - err_mask |= AC_ERR_ATA_BUS; } DPRINTK("error_intr,hStat=0x%x,CE=0x%x,DE =0x%x,SErr=0x%x\n", hstatus, cereg, ioread32(hcr_base + DE), SError); - /* handle single device errors */ - if (cereg) { - /* - * clear the command error, also clears queue to the device - * in error, and we can (re)issue commands to this device. - * When a device is in error all commands queued into the - * host controller and at the device are considered aborted - * and the queue for that device is stopped. Now, after - * clearing the device error, we can issue commands to the - * device to interrogate it to find the source of the error. - */ - dereg = ioread32(hcr_base + DE); - iowrite32(dereg, hcr_base + DE); - iowrite32(cereg, hcr_base + CE); + /* handle fatal errors */ + if (hstatus & FATAL_ERROR_DECODE) { + ehi->err_mask |= AC_ERR_ATA_BUS; + ehi->action |= ATA_EH_SOFTRESET; - DPRINTK("single device error, CE=0x%x, DE=0x%x\n", - ioread32(hcr_base + CE), ioread32(hcr_base + DE)); /* - * We should consider this as non fatal error, and TF must - * be updated as done below. + * Ignore serror in case of fatal errors as we always want + * to do a soft-reset of the FSL SATA controller. Analyzing + * serror may cause libata to schedule a hard-reset action, + * and hard-reset currently does not do controller + * offline/online, causing command timeouts and leads to an + * un-recoverable state, hence make libATA ignore + * autopsy in case of fatal errors. */ - err_mask |= AC_ERR_DEV; - } + ehi->flags |= ATA_EHI_NO_AUTOPSY; - /* handle fatal errors */ - if (hstatus & FATAL_ERROR_DECODE) { - err_mask |= AC_ERR_ATA_BUS; - action |= ATA_EH_RESET; - /* how will fatal error interrupts be completed ?? */ freeze = 1; } @@ -971,30 +1006,83 @@ static void sata_fsl_error_intr(struct ata_port *ap) /* Setup a soft-reset EH action */ ata_ehi_hotplugged(ehi); + ata_ehi_push_desc(ehi, "%s", "PHY RDY changed"); freeze = 1; } - /* record error info */ - qc = ata_qc_from_tag(ap, link->active_tag); + /* handle single device errors */ + if (cereg) { + /* + * clear the command error, also clears queue to the device + * in error, and we can (re)issue commands to this device. + * When a device is in error all commands queued into the + * host controller and at the device are considered aborted + * and the queue for that device is stopped. Now, after + * clearing the device error, we can issue commands to the + * device to interrogate it to find the source of the error. + */ + abort = 1; + + DPRINTK("single device error, CE=0x%x, DE=0x%x\n", + ioread32(hcr_base + CE), ioread32(hcr_base + DE)); - if (qc) + /* find out the offending link and qc */ + if (ap->nr_pmp_links) { + dereg = ioread32(hcr_base + DE); + iowrite32(dereg, hcr_base + DE); + iowrite32(cereg, hcr_base + CE); + + if (dereg < ap->nr_pmp_links) { + link = &ap->pmp_link[dereg]; + ehi = &link->eh_info; + qc = ata_qc_from_tag(ap, link->active_tag); + /* + * We should consider this as non fatal error, + * and TF must be updated as done below. + */ + + err_mask |= AC_ERR_DEV; + + } else { + err_mask |= AC_ERR_HSM; + action |= ATA_EH_HARDRESET; + freeze = 1; + } + } else { + dereg = ioread32(hcr_base + DE); + iowrite32(dereg, hcr_base + DE); + iowrite32(cereg, hcr_base + CE); + + qc = ata_qc_from_tag(ap, link->active_tag); + /* + * We should consider this as non fatal error, + * and TF must be updated as done below. + */ + err_mask |= AC_ERR_DEV; + } + } + + /* record error info */ + if (qc) { qc->err_mask |= err_mask; - else + } else ehi->err_mask |= err_mask; ehi->action |= action; - ehi->serror |= SError; /* freeze or abort */ if (freeze) ata_port_freeze(ap); - else - ata_port_abort(ap); + else if (abort) { + if (qc) + ata_link_abort(qc->dev->link); + else + ata_port_abort(ap); + } } static void sata_fsl_host_intr(struct ata_port *ap) { - struct ata_link *link = &ap->link; struct sata_fsl_host_priv *host_priv = ap->host->private_data; void __iomem *hcr_base = host_priv->hcr_base; u32 hstatus, qc_active = 0; @@ -1017,10 +1105,19 @@ static void sata_fsl_host_intr(struct ata_port *ap) return; } - if (link->sactive) { /* only true for NCQ commands */ + /* Read command completed register */ + qc_active = ioread32(hcr_base + CC); + + VPRINTK("Status of all queues :\n"); + VPRINTK("qc_active/CC = 0x%x, CA = 0x%x, CE=0x%x,CQ=0x%x,apqa=0x%x\n", + qc_active, + ioread32(hcr_base + CA), + ioread32(hcr_base + CE), + ioread32(hcr_base + CQ), + ap->qc_active); + + if (qc_active & ap->qc_active) { int i; - /* Read command completed register */ - qc_active = ioread32(hcr_base + CC); /* clear CC bit, this will also complete the interrupt */ iowrite32(qc_active, hcr_base + CC); @@ -1032,8 +1129,9 @@ static void sata_fsl_host_intr(struct ata_port *ap) for (i = 0; i < SATA_FSL_QUEUE_DEPTH; i++) { if (qc_active & (1 << i)) { qc = ata_qc_from_tag(ap, i); - if (qc) + if (qc) { ata_qc_complete(qc); + } DPRINTK ("completing ncq cmd,tag=%d,CC=0x%x,CA=0x%x\n", i, ioread32(hcr_base + CC), @@ -1042,19 +1140,21 @@ static void sata_fsl_host_intr(struct ata_port *ap) } return; - } else if (ap->qc_active) { + } else if ((ap->qc_active & (1 << ATA_TAG_INTERNAL))) { iowrite32(1, hcr_base + CC); - qc = ata_qc_from_tag(ap, link->active_tag); + qc = ata_qc_from_tag(ap, ATA_TAG_INTERNAL); - DPRINTK("completing non-ncq cmd, tag=%d,CC=0x%x\n", - link->active_tag, ioread32(hcr_base + CC)); + DPRINTK("completing non-ncq cmd, CC=0x%x\n", + ioread32(hcr_base + CC)); - if (qc) + if (qc) { ata_qc_complete(qc); + } } else { /* Spurious Interrupt!! */ DPRINTK("spurious interrupt!!, CC = 0x%x\n", ioread32(hcr_base + CC)); + iowrite32(qc_active, hcr_base + CC); return; } } @@ -1130,9 +1230,6 @@ static int sata_fsl_init_controller(struct ata_host *host) iowrite32(0x00000FFFF, hcr_base + CE); iowrite32(0x00000FFFF, hcr_base + DE); - /* initially assuming no Port multiplier, set CQPMP to 0 */ - iowrite32(0x0, hcr_base + CQPMP); - /* * host controller will be brought on-line, during xx_port_start() * callback, that should also initiate the OOB, COMINIT sequence @@ -1154,8 +1251,8 @@ static struct scsi_host_template sata_fsl_sht = { .dma_boundary = ATA_DMA_BOUNDARY, }; -static const struct ata_port_operations sata_fsl_ops = { - .inherits = &sata_port_ops, +static struct ata_port_operations sata_fsl_ops = { + .inherits = &sata_pmp_port_ops, .qc_prep = sata_fsl_qc_prep, .qc_issue = sata_fsl_qc_issue, @@ -1168,10 +1265,15 @@ static const struct ata_port_operations sata_fsl_ops = { .thaw = sata_fsl_thaw, .prereset = sata_fsl_prereset, .softreset = sata_fsl_softreset, + .pmp_softreset = sata_fsl_softreset, + .error_handler = sata_fsl_error_handler, .post_internal_cmd = sata_fsl_post_internal_cmd, .port_start = sata_fsl_port_start, .port_stop = sata_fsl_port_stop, + + .pmp_attach = sata_fsl_pmp_attach, + .pmp_detach = sata_fsl_pmp_detach, }; static const struct ata_port_info sata_fsl_port_info[] = { -- cgit v1.2.3 From 3072c379bccfa2844e33103ed9ff530780e660ea Mon Sep 17 00:00:00 2001 From: peerchen Date: Mon, 19 May 2008 14:44:57 +0800 Subject: ahci: change the Device IDs of nvidia MCP7B AHCI controller in ahci.c Change the partial Device IDs of nvidia MCP7B AHCI controller in ahci.c, as the actual PCI IDs deployed in the field differed from the forecasted ones preemptively placed in the driver. Signed-off-by: Peer Chen Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 97f83fb2ee2..544b7d6c617 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -502,10 +502,10 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(NVIDIA, 0x0bcd), board_ahci }, /* MCP7B */ { PCI_VDEVICE(NVIDIA, 0x0bce), board_ahci }, /* MCP7B */ { PCI_VDEVICE(NVIDIA, 0x0bcf), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bd0), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bd1), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bd2), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bd3), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bc4), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bc5), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bc6), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bc7), board_ahci }, /* MCP7B */ /* SiS */ { PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */ -- cgit v1.2.3 From a9b841e1a336822a25899ec8cdf70a55a6696ae7 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 30 May 2008 13:39:12 +1000 Subject: PCI: fix rpadlpar pci hotplug driver sysfs usage When Greg "fixed" the sysfs usage of that driver a while back, he seem to have introduced a bug where the quotes are added around the name of our specific sysfs files, thus breaking the user space tool. This fixes it. Tested DLPAR operations on a POWER6 machine successfully. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/rpadlpar_sysfs.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/rpadlpar_sysfs.c b/drivers/pci/hotplug/rpadlpar_sysfs.c index e32148a8fa1..779c5db71be 100644 --- a/drivers/pci/hotplug/rpadlpar_sysfs.c +++ b/drivers/pci/hotplug/rpadlpar_sysfs.c @@ -18,8 +18,12 @@ #include "rpadlpar.h" #define DLPAR_KOBJ_NAME "control" -#define ADD_SLOT_ATTR_NAME "add_slot" -#define REMOVE_SLOT_ATTR_NAME "remove_slot" + +/* Those two have no quotes because they are passed to __ATTR() which + * stringifies the argument (yuck !) + */ +#define ADD_SLOT_ATTR_NAME add_slot +#define REMOVE_SLOT_ATTR_NAME remove_slot #define MAX_DRC_NAME_LEN 64 -- cgit v1.2.3 From 57f50ca127a3189566af0d6378394c75a26f0f7e Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 30 May 2008 17:02:50 +0200 Subject: drivers/watchdog/geodewdt.c: build fix * Wim Van Sebroeck wrote: > Author: Jordan Crouse > Date: Mon Jan 21 10:07:00 2008 -0700 > > [WATCHDOG] Add a watchdog driver based on the CS5535/CS5536 MFGPT timers -tip testing found the following build failure on latest -git: drivers/watchdog/geodewdt.c: In function 'geodewdt_probe': drivers/watchdog/geodewdt.c:225: error: too many arguments to function 'geode_mfgpt_alloc_timer' make[1]: *** [drivers/watchdog/geodewdt.o] Error 1 make: *** [drivers/watchdog/geodewdt.o] Error 2 with this config: http://redhat.com/~mingo/misc/config-Fri_May_30_15_19_52_CEST_2008.bad find the fix below. Signed-off-by: Ingo Molnar Acked-by: Jordan Crouse Signed-off-by: Linus Torvalds --- drivers/watchdog/geodewdt.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/watchdog/geodewdt.c b/drivers/watchdog/geodewdt.c index f85b19625f9..30d09cbbad9 100644 --- a/drivers/watchdog/geodewdt.c +++ b/drivers/watchdog/geodewdt.c @@ -221,8 +221,7 @@ geodewdt_probe(struct platform_device *dev) { int ret, timer; - timer = geode_mfgpt_alloc_timer(MFGPT_TIMER_ANY, - MFGPT_DOMAIN_WORKING, THIS_MODULE); + timer = geode_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING); if (timer == -1) { printk(KERN_ERR "geodewdt: No timers were available\n"); -- cgit v1.2.3 From 3c39740073b20d4cbb0e3567225500e96acf383c Mon Sep 17 00:00:00 2001 From: Seokmann Ju Date: Mon, 19 May 2008 14:25:39 -0700 Subject: [SCSI] qla2xxx: Revert "qla2xxx: Use proper HA during asynchronous event handling." This reverts commit bd2a1846b2313e32d0270151a31a6b8335384a20. The original (prior to the reverted commit) code was correct. Additionally, the vp_idx should be checked during MBA_PORT_UPDATE in order for proper handling to take place for a given vport. Signed-off-by: Seokmann Ju Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_isr.c | 36 ++++++++++-------------------------- 1 file changed, 10 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 14bcd7cc9ae..ec63b79f900 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -272,8 +272,6 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) uint32_t rscn_entry, host_pid; uint8_t rscn_queue_index; unsigned long flags; - scsi_qla_host_t *vha; - int i; /* Setup to process RIO completion. */ handle_cnt = 0; @@ -544,18 +542,10 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) break; case MBA_PORT_UPDATE: /* Port database update */ - if ((ha->flags.npiv_supported) && (ha->num_vhosts)) { - for_each_mapped_vp_idx(ha, i) { - list_for_each_entry(vha, &ha->vp_list, - vp_list) { - if ((mb[3] & 0xff) - == vha->vp_idx) { - ha = vha; - break; - } - } - } - } + /* Only handle SCNs for our Vport index. */ + if (ha->parent && ha->vp_idx != (mb[3] & 0xff)) + break; + /* * If PORT UPDATE is global (recieved LIP_OCCURED/LIP_RESET * event etc. earlier indicating loop is down) then process @@ -590,18 +580,12 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) break; case MBA_RSCN_UPDATE: /* State Change Registration */ - if ((ha->flags.npiv_supported) && (ha->num_vhosts)) { - for_each_mapped_vp_idx(ha, i) { - list_for_each_entry(vha, &ha->vp_list, - vp_list) { - if ((mb[3] & 0xff) - == vha->vp_idx) { - ha = vha; - break; - } - } - } - } + /* Check if the Vport has issued a SCR */ + if (ha->parent && test_bit(VP_SCR_NEEDED, &ha->vp_flags)) + break; + /* Only handle SCNs for our Vport index. */ + if (ha->parent && ha->vp_idx != (mb[3] & 0xff)) + break; DEBUG2(printk("scsi(%ld): Asynchronous RSCR UPDATE.\n", ha->host_no)); -- cgit v1.2.3 From 08b95a12cd956e98b4a1ad5b638935dcb6c88c67 Mon Sep 17 00:00:00 2001 From: Seokmann Ju Date: Mon, 19 May 2008 14:25:40 -0700 Subject: [SCSI] qla2xxx: Correct handling of AENs postings for vports. Initialize all proper structure members in order to support work-list vport processing. This code also properly acquires the correct (physical hardware_lock) lock during work submission. Signed-off-by: Seokmann Ju Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_mid.c | 1 + drivers/scsi/qla2xxx/qla_os.c | 14 ++++++++------ 2 files changed, 9 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c index fc55429dc91..62a3ad6e8ec 100644 --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -406,6 +406,7 @@ qla24xx_create_vhost(struct fc_vport *fc_vport) INIT_LIST_HEAD(&vha->list); INIT_LIST_HEAD(&vha->fcports); INIT_LIST_HEAD(&vha->vp_fcports); + INIT_LIST_HEAD(&vha->work_list); vha->dpc_flags = 0L; set_bit(REGISTER_FDMI_NEEDED, &vha->dpc_flags); diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 817f62fbdd8..48eaa3bb543 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -2157,13 +2157,14 @@ static int qla2x00_post_work(struct scsi_qla_host *ha, struct qla_work_evt *e, int locked) { unsigned long flags; + scsi_qla_host_t *pha = to_qla_parent(ha); if (!locked) - spin_lock_irqsave(&ha->hardware_lock, flags); + spin_lock_irqsave(&pha->hardware_lock, flags); list_add_tail(&e->list, &ha->work_list); qla2xxx_wake_dpc(ha); if (!locked) - spin_unlock_irqrestore(&ha->hardware_lock, flags); + spin_unlock_irqrestore(&pha->hardware_lock, flags); return QLA_SUCCESS; } @@ -2203,12 +2204,13 @@ static void qla2x00_do_work(struct scsi_qla_host *ha) { struct qla_work_evt *e; + scsi_qla_host_t *pha = to_qla_parent(ha); - spin_lock_irq(&ha->hardware_lock); + spin_lock_irq(&pha->hardware_lock); while (!list_empty(&ha->work_list)) { e = list_entry(ha->work_list.next, struct qla_work_evt, list); list_del_init(&e->list); - spin_unlock_irq(&ha->hardware_lock); + spin_unlock_irq(&pha->hardware_lock); switch (e->type) { case QLA_EVT_AEN: @@ -2222,9 +2224,9 @@ qla2x00_do_work(struct scsi_qla_host *ha) } if (e->flags & QLA_EVT_FLAG_FREE) kfree(e); - spin_lock_irq(&ha->hardware_lock); + spin_lock_irq(&pha->hardware_lock); } - spin_unlock_irq(&ha->hardware_lock); + spin_unlock_irq(&pha->hardware_lock); } /************************************************************************** -- cgit v1.2.3 From 28d7647de2ee075aaed5ca835f445e885884f163 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Mon, 19 May 2008 14:25:41 -0700 Subject: [SCSI] qla2xxx: Update version number to 8.02.01-k4. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index b42e3f2c7df..d058c8862b3 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.02.01-k3" +#define QLA2XXX_VERSION "8.02.01-k4" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 2 -- cgit v1.2.3 From b055629eaef7758b35dc91c76cf4f158025562bf Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 30 May 2008 22:18:35 +0100 Subject: [netdrvr] sfc: Report XAUI link down at default log level This is normal when the external link is down so don't report it as an error. Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik --- drivers/net/sfc/falcon_xmac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/sfc/falcon_xmac.c b/drivers/net/sfc/falcon_xmac.c index dbdcee4b0f8..55c0d9760be 100644 --- a/drivers/net/sfc/falcon_xmac.c +++ b/drivers/net/sfc/falcon_xmac.c @@ -459,7 +459,7 @@ static int falcon_check_xaui_link_up(struct efx_nic *efx) tries--; } - EFX_ERR(efx, "Failed to bring XAUI link back up in %d tries!\n", + EFX_LOG(efx, "Failed to bring XAUI link back up in %d tries!\n", max_tries); return 0; } -- cgit v1.2.3 From 17a9440f7deb781935c76e2e55d376a35611a6f9 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Fri, 30 May 2008 11:18:55 +0800 Subject: [netdrvr] CS89X0: Add cleanup for dma after fail After request_dma() succeeding, any error path should do free_dma(). Signed-off-by: Wang Chen Signed-off-by: Jeff Garzik --- drivers/net/cs89x0.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c index 348371fda59..fba87abe78e 100644 --- a/drivers/net/cs89x0.c +++ b/drivers/net/cs89x0.c @@ -1394,7 +1394,11 @@ net_open(struct net_device *dev) #endif if (!result) { printk(KERN_ERR "%s: EEPROM is configured for unavailable media\n", dev->name); - release_irq: +release_dma: +#if ALLOW_DMA + free_dma(dev->dma); +#endif +release_irq: #if ALLOW_DMA release_dma_buff(lp); #endif @@ -1442,12 +1446,12 @@ net_open(struct net_device *dev) if ((result = detect_bnc(dev)) != DETECTED_NONE) break; printk(KERN_ERR "%s: no media detected\n", dev->name); - goto release_irq; + goto release_dma; } switch(result) { case DETECTED_NONE: printk(KERN_ERR "%s: no network cable attached to configured media\n", dev->name); - goto release_irq; + goto release_dma; case DETECTED_RJ45H: printk(KERN_INFO "%s: using half-duplex 10Base-T (RJ-45)\n", dev->name); break; -- cgit v1.2.3 From 6f94f709b5b1d3a9b5f1ff7d4f3534de6cde3ff6 Mon Sep 17 00:00:00 2001 From: Cesar Eduardo Barros Date: Thu, 29 May 2008 21:58:36 -0300 Subject: sc92031: remove bogus unlikely() Commit 5a0a92e67b5009a71e011658da04fb92dad8961f mentions len < ETH_ZLEN is true for ARP packets. This obviously is not unlikely. Signed-off-by: Cesar Eduardo Barros Signed-off-by: Jeff Garzik --- drivers/net/sc92031.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c index b4b63805ee8..61955f8d801 100644 --- a/drivers/net/sc92031.c +++ b/drivers/net/sc92031.c @@ -972,7 +972,7 @@ static int sc92031_start_xmit(struct sk_buff *skb, struct net_device *dev) skb_copy_and_csum_dev(skb, priv->tx_bufs + entry * TX_BUF_SIZE); len = skb->len; - if (unlikely(len < ETH_ZLEN)) { + if (len < ETH_ZLEN) { memset(priv->tx_bufs + entry * TX_BUF_SIZE + len, 0, ETH_ZLEN - len); len = ETH_ZLEN; -- cgit v1.2.3 From d399cf8c04c595d738d82d02ae2755b902a51571 Mon Sep 17 00:00:00 2001 From: Brice Goglin Date: Wed, 28 May 2008 09:10:01 +0200 Subject: myri10ge: update driver version Update myri10ge version to 1.3.99-1.347. Signed-off-by: Brice Goglin Signed-off-by: Jeff Garzik --- drivers/net/myri10ge/myri10ge.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index 36be6efc639..e0d76c75aea 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -75,7 +75,7 @@ #include "myri10ge_mcp.h" #include "myri10ge_mcp_gen_header.h" -#define MYRI10GE_VERSION_STR "1.3.2-1.287" +#define MYRI10GE_VERSION_STR "1.3.99-1.347" MODULE_DESCRIPTION("Myricom 10G driver (10GbE)"); MODULE_AUTHOR("Maintainer: help@myri.com"); -- cgit v1.2.3 From 7eb2e25112bf920bb0a4d1cca445f3d96874c25f Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Mon, 26 May 2008 17:42:42 +1000 Subject: virtio: fix virtio_net xmit of freed skb bug If we fail to transmit a packet, we assume the queue is full and put the skb into last_xmit_skb. However, if more space frees up before we xmit it, we loop, and the result can be transmitting the same skb twice. Fix is simple: set skb to NULL if we've used it in some way, and check before sending. Signed-off-by: Rusty Russell Signed-off-by: Jeff Garzik --- drivers/net/virtio_net.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index fe7cdf2a2a2..d50f4fe352b 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -287,21 +287,25 @@ again: free_old_xmit_skbs(vi); /* If we has a buffer left over from last time, send it now. */ - if (vi->last_xmit_skb) { + if (unlikely(vi->last_xmit_skb)) { if (xmit_skb(vi, vi->last_xmit_skb) != 0) { /* Drop this skb: we only queue one. */ vi->dev->stats.tx_dropped++; kfree_skb(skb); + skb = NULL; goto stop_queue; } vi->last_xmit_skb = NULL; } /* Put new one in send queue and do transmit */ - __skb_queue_head(&vi->send, skb); - if (xmit_skb(vi, skb) != 0) { - vi->last_xmit_skb = skb; - goto stop_queue; + if (likely(skb)) { + __skb_queue_head(&vi->send, skb); + if (xmit_skb(vi, skb) != 0) { + vi->last_xmit_skb = skb; + skb = NULL; + goto stop_queue; + } } done: vi->svq->vq_ops->kick(vi->svq); -- cgit v1.2.3 From 11a3a1546d0adc36485c2ad4af7ab950712df6ff Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Mon, 26 May 2008 17:48:13 +1000 Subject: virtio: fix delayed xmit of packet and freeing of old packets. Because we cache the last failed-to-xmit packet, if there are no packets queued behind that one we may never send it (reproduced here as TCP stalls, "cured" by an outgoing ping). Cc: Mark McLoughlin Signed-off-by: Rusty Russell Signed-off-by: Jeff Garzik --- drivers/net/virtio_net.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'drivers') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index d50f4fe352b..5450eac9e26 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -47,6 +47,9 @@ struct virtnet_info /* Number of input buffers, and max we've ever had. */ unsigned int num, max; + /* For cleaning up after transmission. */ + struct tasklet_struct tasklet; + /* Receive & send queues. */ struct sk_buff_head recv; struct sk_buff_head send; @@ -68,8 +71,13 @@ static void skb_xmit_done(struct virtqueue *svq) /* Suppress further interrupts. */ svq->vq_ops->disable_cb(svq); + /* We were waiting for more output buffers. */ netif_wake_queue(vi->dev); + + /* Make sure we re-xmit last_xmit_skb: if there are no more packets + * queued, start_xmit won't be called. */ + tasklet_schedule(&vi->tasklet); } static void receive_skb(struct net_device *dev, struct sk_buff *skb, @@ -278,6 +286,18 @@ static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb) return vi->svq->vq_ops->add_buf(vi->svq, sg, num, 0, skb); } +static void xmit_tasklet(unsigned long data) +{ + struct virtnet_info *vi = (void *)data; + + netif_tx_lock_bh(vi->dev); + if (vi->last_xmit_skb && xmit_skb(vi, vi->last_xmit_skb) == 0) { + vi->svq->vq_ops->kick(vi->svq); + vi->last_xmit_skb = NULL; + } + netif_tx_unlock_bh(vi->dev); +} + static int start_xmit(struct sk_buff *skb, struct net_device *dev) { struct virtnet_info *vi = netdev_priv(dev); @@ -432,6 +452,8 @@ static int virtnet_probe(struct virtio_device *vdev) skb_queue_head_init(&vi->recv); skb_queue_head_init(&vi->send); + tasklet_init(&vi->tasklet, xmit_tasklet, (unsigned long)vi); + err = register_netdev(dev); if (err) { pr_debug("virtio_net: registering device failed\n"); -- cgit v1.2.3 From 25f03dcf63d233c13970751253b62a678bd85ccc Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Fri, 23 May 2008 18:11:26 +0800 Subject: ucc_geth_ethtool: Fix typo Signed-off-by: Joakim Tjernlund Signed-off-by: Li Yang Signed-off-by: Jeff Garzik --- drivers/net/ucc_geth_ethtool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c index 299b7f17695..b84ffd84c4e 100644 --- a/drivers/net/ucc_geth_ethtool.c +++ b/drivers/net/ucc_geth_ethtool.c @@ -308,7 +308,7 @@ static void uec_get_strings(struct net_device *netdev, u32 stringset, u8 *buf) buf += UEC_TX_FW_STATS_LEN * ETH_GSTRING_LEN; } if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_RX) - memcpy(buf, tx_fw_stat_gstrings, UEC_RX_FW_STATS_LEN * + memcpy(buf, rx_fw_stat_gstrings, UEC_RX_FW_STATS_LEN * ETH_GSTRING_LEN); } -- cgit v1.2.3 From 08722bc4a066705e3f5fb4a5a87ce717fe9f896e Mon Sep 17 00:00:00 2001 From: Li Yang Date: Fri, 23 May 2008 18:11:27 +0800 Subject: ucc_geth_ethtool: Add a missing HW stats counter Signed-off-by: Joakim Tjernlund Signed-off-by: Li Yang Signed-off-by: Jeff Garzik --- drivers/net/ucc_geth_ethtool.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c index b84ffd84c4e..f5839c4a5cb 100644 --- a/drivers/net/ucc_geth_ethtool.c +++ b/drivers/net/ucc_geth_ethtool.c @@ -73,6 +73,7 @@ static char tx_fw_stat_gstrings[][ETH_GSTRING_LEN] = { "tx-frames-ok", "tx-excessive-differ-frames", "tx-256-511-frames", + "tx-512-1023-frames", "tx-1024-1518-frames", "tx-jumbo-frames", }; -- cgit v1.2.3 From aefdbf1a3b832a580a50cf3d1dcbb717be7cbdbe Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Fri, 23 May 2008 02:00:25 +0400 Subject: atl1: fix 4G memory corruption bug When using 4+ GB RAM and SWIOTLB is active, the driver corrupts memory by writing an skb after the relevant DMA page has been unmapped. Although this doesn't happen when *not* using bounce buffers, clearing the pointer to the DMA page after unmapping it fixes the problem. http://marc.info/?t=120861317000005&r=2&w=2 Signed-off-by: Alexey Dobriyan Signed-off-by: Jay Cliburn Signed-off-by: Jeff Garzik --- drivers/net/atlx/atl1.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 9c2394d4942..79325c4fb54 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -2023,6 +2023,7 @@ rrd_ok: /* Good Receive */ pci_unmap_page(adapter->pdev, buffer_info->dma, buffer_info->length, PCI_DMA_FROMDEVICE); + buffer_info->dma = 0; skb = buffer_info->skb; length = le16_to_cpu(rrd->xsz.xsum_sz.pkt_size); -- cgit v1.2.3 From 56997fa838e333cea33ab641d4aeedd23aef0eb1 Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Mon, 12 May 2008 00:37:51 -0600 Subject: [netdrvr] tulip: oops in tulip_interrupt when hibernating with swsusp/suspend2 The following patch is seems to fix the tulip suspend/resume panic: http://bugzilla.kernel.org/show_bug.cgi?id=8952#c46 My attempts at a cleaner patch failed and Pavel thinks this is OK. Original from: kernelbugs@tap.homeip.net Signed-off-by: Grant Grundler Signed-off-by: Jeff Garzik --- drivers/net/tulip/tulip_core.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c index f9d13fa05d6..55670b5eb61 100644 --- a/drivers/net/tulip/tulip_core.c +++ b/drivers/net/tulip/tulip_core.c @@ -1729,12 +1729,15 @@ static int tulip_suspend (struct pci_dev *pdev, pm_message_t state) if (!dev) return -EINVAL; - if (netif_running(dev)) - tulip_down(dev); + if (!netif_running(dev)) + goto save_state; + + tulip_down(dev); netif_device_detach(dev); free_irq(dev->irq, dev); +save_state: pci_save_state(pdev); pci_disable_device(pdev); pci_set_power_state(pdev, pci_choose_state(pdev, state)); @@ -1754,6 +1757,9 @@ static int tulip_resume(struct pci_dev *pdev) pci_set_power_state(pdev, PCI_D0); pci_restore_state(pdev); + if (!netif_running(dev)) + return 0; + if ((retval = pci_enable_device(pdev))) { printk (KERN_ERR "tulip: pci_enable_device failed in resume\n"); return retval; -- cgit v1.2.3 From a4ed1e41a734d77c9a83a88a8736e19b68e6a2a0 Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Sat, 31 May 2008 16:10:04 +0800 Subject: 8250 Serial Driver: revert extra IRQ flag definition patch As Russell pointed out, original patch will break some serial configurations because of the dependency of the header file. Revert it first and try to find out other solution later Cc: Javier Herrero Cc: Alan Cox Cc: Russell King Signed-off-by: Bryan Wu --- drivers/serial/8250.c | 4 +--- drivers/serial/8250.h | 5 ----- 2 files changed, 1 insertion(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 1400ea6a249..1bc00b721e9 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -43,7 +43,6 @@ #include #include -#include #include "8250.h" @@ -93,6 +92,7 @@ static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS; */ #define CONFIG_HUB6 1 +#include /* * SERIAL_PORT_DFNS tells us about built-in ports that have no * standard enumeration mechanism. Platforms that can find all @@ -1547,8 +1547,6 @@ static int serial_link_irq_chain(struct uart_8250_port *up) i->head = &up->list; spin_unlock_irq(&i->lock); - irq_flags |= SERIAL_EXTRA_IRQ_FLAGS; - ret = request_irq(up->port.irq, serial8250_interrupt, irq_flags, "serial", i); if (ret < 0) diff --git a/drivers/serial/8250.h b/drivers/serial/8250.h index a10a40cc0d9..91bd28f2bb4 100644 --- a/drivers/serial/8250.h +++ b/drivers/serial/8250.h @@ -78,8 +78,3 @@ struct serial8250_config { #else #define ALPHA_KLUDGE_MCR 0 #endif - -#ifndef SERIAL_EXTRA_IRQ_FLAGS -#define SERIAL_EXTRA_IRQ_FLAGS 0 -#endif - -- cgit v1.2.3 From 4b34fe156455d26ee6ed67b61539f136bf4e439c Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 2 Jun 2008 16:42:49 -0600 Subject: PNP: mark resources that conflict with PCI devices "disabled" Both the PNP/PCI conflict detection quirk and the PNP system driver must use the same mechanism to mark resources as disabled. I think it's best to keep the resource and to keep the type bit (IORESOURCE_MEM, etc), so that we match the list from firmware as closely as possible. Fixes this regression from 2.6.25: http://lkml.org/lkml/2008/6/1/82 Signed-off-by: Bjorn Helgaas Tested-by: Avuton Olrich Signed-off-by: Linus Torvalds --- drivers/pnp/quirks.c | 2 +- drivers/pnp/system.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pnp/quirks.c b/drivers/pnp/quirks.c index e2b7de4cb05..1ff3bb585ab 100644 --- a/drivers/pnp/quirks.c +++ b/drivers/pnp/quirks.c @@ -286,7 +286,7 @@ static void quirk_system_pci_resources(struct pnp_dev *dev) pci_name(pdev), i, (unsigned long long) pci_start, (unsigned long long) pci_end); - res->flags = 0; + res->flags |= IORESOURCE_DISABLED; } } } diff --git a/drivers/pnp/system.c b/drivers/pnp/system.c index 9c2496dbeee..8f0a570509c 100644 --- a/drivers/pnp/system.c +++ b/drivers/pnp/system.c @@ -81,7 +81,7 @@ static void reserve_resources_of_dev(struct pnp_dev *dev) } for (i = 0; (res = pnp_get_resource(dev, IORESOURCE_MEM, i)); i++) { - if (res->flags & IORESOURCE_UNSET) + if (res->flags & IORESOURCE_DISABLED) continue; reserve_range(dev, res->start, res->end, 0); -- cgit v1.2.3 From 1feaa51d84e9611521ec6e59172f9f90db274588 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Tue, 3 Jun 2008 12:19:45 +0800 Subject: Blackfin Serial Driver: Clean up BF54x macro in blackfin UART driver. Hide difference in head file. Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- drivers/serial/bfin_5xx.c | 30 +++++------------------------- 1 file changed, 5 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index d6b4ead693b..636b6876c6f 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -530,11 +530,7 @@ static unsigned int bfin_serial_get_mctrl(struct uart_port *port) if (uart->cts_pin < 0) return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; -# ifdef BF54x - if (UART_GET_MSR(uart) & CTS) -# else - if (gpio_get_value(uart->cts_pin)) -# endif + if (UART_GET_CTS(uart)) return TIOCM_DSR | TIOCM_CAR; else #endif @@ -549,17 +545,9 @@ static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) return; if (mctrl & TIOCM_RTS) -# ifdef BF54x - UART_PUT_MCR(uart, UART_GET_MCR(uart) & ~MRTS); -# else - gpio_set_value(uart->rts_pin, 0); -# endif + UART_CLEAR_RTS(uart); else -# ifdef BF54x - UART_PUT_MCR(uart, UART_GET_MCR(uart) | MRTS); -# else - gpio_set_value(uart->rts_pin, 1); -# endif + UART_SET_RTS(uart); #endif } @@ -752,11 +740,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, /* Disable UART */ ier = UART_GET_IER(uart); -#ifdef CONFIG_BF54x - UART_CLEAR_IER(uart, 0xF); -#else - UART_PUT_IER(uart, 0); -#endif + UART_DISABLE_INTS(uart); /* Set DLAB in LCR to Access DLL and DLH */ UART_SET_DLAB(uart); @@ -771,11 +755,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, UART_PUT_LCR(uart, lcr); /* Enable UART */ -#ifdef CONFIG_BF54x - UART_SET_IER(uart, ier); -#else - UART_PUT_IER(uart, ier); -#endif + UART_ENABLE_INTS(uart, ier); val = UART_GET_GCTL(uart); val |= UCEN; -- cgit v1.2.3 From 64e9159f5d2c4edf5fa6425031e556f8fddaf7e6 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 3 Jun 2008 15:18:54 +0100 Subject: serial_core: uart_set_ldisc infrastructure The tty layer provides a callback that is used when the line discipline is changed. Some hardware uses this to configure hardware specific features such as IrDA mode on serial ports. Unfortunately the serial layer does not provide this feature or pass it down to drivers. Blackfin used to hack around this by rewriting the tty ops, but those are now properly shared and const so the hack fails. Instead provide the proper operations. This change plus a follow up from the Blackfin guys is needed to avoid blackfin losing features in this release. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/serial_core.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 53b03c629af..951a75ea6e3 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -1165,6 +1165,15 @@ out: return ret; } +static void uart_set_ldisc(struct tty_struct *tty, int ldisc) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port = state->port; + + if (port->ops->set_ldisc) + port->ops->set_ldisc(port); +} + static void uart_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { @@ -2288,6 +2297,7 @@ static const struct tty_operations uart_ops = { .unthrottle = uart_unthrottle, .send_xchar = uart_send_xchar, .set_termios = uart_set_termios, + .set_ldisc = uart_set_ldisc, .stop = uart_stop, .start = uart_start, .hangup = uart_hangup, -- cgit v1.2.3 From 664d080c41463570b95717b5ad86e79dc1be0877 Mon Sep 17 00:00:00 2001 From: Holger Macht Date: Tue, 3 Jun 2008 20:27:59 +0200 Subject: [libata] ACPI: Properly handle bay devices in dock stations * Differentiate between bay devices in dock stations and others: - When an ACPI_NOTIFY_EJECT_REQUEST appears, just signal uevent to userspace (that is when the optional eject button on a bay device is pressed/pulled) giving the possibility to unmount file systems and to clean up. Also, only send uevent in case we get an EJECT_REQUEST without doing anything else. In other cases, you'll get an add/remove event because libata attaches/detaches the device. - In case of a dock event, which in turn signals an ACPI_NOTIFY_EJECT_REQUEST, immediately detach the device, because it may already have been gone * In case of an ACPI_NOTIFY_DEVICE/BUS_CHECK, evaluate _STA to check if the device has been plugged or unplugged. If plugged, hotplug it, if unplugged, just signal event to userspace (initial patch by Matthew Garrett ) * Call ACPI _EJ0 for detached devices Signed-off-by: Holger Macht Signed-off-by: Jeff Garzik --- drivers/ata/libata-acpi.c | 165 ++++++++++++++++++++++++++++++++-------------- 1 file changed, 114 insertions(+), 51 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index dbf6ca781f6..3ff8b14420d 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -118,12 +118,62 @@ static void ata_acpi_associate_ide_port(struct ata_port *ap) ap->pflags |= ATA_PFLAG_INIT_GTM_VALID; } -static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device - *dev, u32 event) +static void ata_acpi_eject_device(acpi_handle handle) +{ + struct acpi_object_list arg_list; + union acpi_object arg; + + arg_list.count = 1; + arg_list.pointer = &arg; + arg.type = ACPI_TYPE_INTEGER; + arg.integer.value = 1; + + if (ACPI_FAILURE(acpi_evaluate_object(handle, "_EJ0", + &arg_list, NULL))) + printk(KERN_ERR "Failed to evaluate _EJ0!\n"); +} + +/* @ap and @dev are the same as ata_acpi_handle_hotplug() */ +static void ata_acpi_detach_device(struct ata_port *ap, struct ata_device *dev) +{ + if (dev) + dev->flags |= ATA_DFLAG_DETACH; + else { + struct ata_link *tlink; + struct ata_device *tdev; + + ata_port_for_each_link(tlink, ap) + ata_link_for_each_dev(tdev, tlink) + tdev->flags |= ATA_DFLAG_DETACH; + } + + ata_port_schedule_eh(ap); +} + +/** + * ata_acpi_handle_hotplug - ACPI event handler backend + * @ap: ATA port ACPI event occurred + * @dev: ATA device ACPI event occurred (can be NULL) + * @event: ACPI event which occurred + * @is_dock_event: boolean indicating whether the event was a dock one + * + * All ACPI bay / device realted events end up in this function. If + * the event is port-wide @dev is NULL. If the event is specific to a + * device, @dev points to it. + * + * Hotplug (as opposed to unplug) notification is always handled as + * port-wide while unplug only kills the target device on device-wide + * event. + * + * LOCKING: + * ACPI notify handler context. May sleep. + */ +static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device *dev, + u32 event, int is_dock_event) { char event_string[12]; char *envp[] = { event_string, NULL }; - struct ata_eh_info *ehi; + struct ata_eh_info *ehi = &ap->link.eh_info; struct kobject *kobj = NULL; int wait = 0; unsigned long flags; @@ -131,87 +181,100 @@ static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device unsigned long sta; acpi_status status; - if (!ap) - ap = dev->link->ap; - ehi = &ap->link.eh_info; - - spin_lock_irqsave(ap->lock, flags); - - if (dev) + if (dev) { + if (dev->sdev) + kobj = &dev->sdev->sdev_gendev.kobj; handle = dev->acpi_handle; - else + } else { + kobj = &ap->dev->kobj; handle = ap->acpi_handle; + } status = acpi_get_handle(handle, "_EJ0", &tmphandle); - if (ACPI_FAILURE(status)) { - /* This device is not ejectable */ - spin_unlock_irqrestore(ap->lock, flags); + if (ACPI_FAILURE(status)) + /* This device does not support hotplug */ return; - } - status = acpi_evaluate_integer(handle, "_STA", NULL, &sta); - if (ACPI_FAILURE(status)) { - printk ("Unable to determine bay status\n"); - spin_unlock_irqrestore(ap->lock, flags); - return; - } + spin_lock_irqsave(ap->lock, flags); switch (event) { case ACPI_NOTIFY_BUS_CHECK: case ACPI_NOTIFY_DEVICE_CHECK: ata_ehi_push_desc(ehi, "ACPI event"); - if (!sta) { - /* Device has been unplugged */ - if (dev) - dev->flags |= ATA_DFLAG_DETACH; - else { - struct ata_link *tlink; - struct ata_device *tdev; - - ata_port_for_each_link(tlink, ap) { - ata_link_for_each_dev(tdev, tlink) { - tdev->flags |= - ATA_DFLAG_DETACH; - } - } - } - ata_port_schedule_eh(ap); - wait = 1; - } else { + + status = acpi_evaluate_integer(handle, "_STA", NULL, &sta); + if (ACPI_FAILURE(status)) { + ata_port_printk(ap, KERN_ERR, + "acpi: failed to determine bay status (0x%x)\n", + status); + break; + } + + if (sta) { ata_ehi_hotplugged(ehi); ata_port_freeze(ap); + } else { + /* The device has gone - unplug it */ + ata_acpi_detach_device(ap, dev); + wait = 1; } + break; + case ACPI_NOTIFY_EJECT_REQUEST: + ata_ehi_push_desc(ehi, "ACPI event"); + + if (!is_dock_event) + break; + + /* undock event - immediate unplug */ + ata_acpi_detach_device(ap, dev); + wait = 1; + break; } + /* make sure kobj doesn't go away while ap->lock is released */ + kobject_get(kobj); + spin_unlock_irqrestore(ap->lock, flags); - if (wait) + if (wait) { ata_port_wait_eh(ap); + ata_acpi_eject_device(handle); + } - if (dev) { - if (dev->sdev) - kobj = &dev->sdev->sdev_gendev.kobj; - } else - kobj = &ap->dev->kobj; - - if (kobj) { + if (kobj && !is_dock_event) { sprintf(event_string, "BAY_EVENT=%d", event); kobject_uevent_env(kobj, KOBJ_CHANGE, envp); } + + kobject_put(kobj); +} + +static void ata_acpi_dev_notify_dock(acpi_handle handle, u32 event, void *data) +{ + struct ata_device *dev = data; + + ata_acpi_handle_hotplug(dev->link->ap, dev, event, 1); +} + +static void ata_acpi_ap_notify_dock(acpi_handle handle, u32 event, void *data) +{ + struct ata_port *ap = data; + + ata_acpi_handle_hotplug(ap, NULL, event, 1); } static void ata_acpi_dev_notify(acpi_handle handle, u32 event, void *data) { struct ata_device *dev = data; - ata_acpi_handle_hotplug(NULL, dev, event); + ata_acpi_handle_hotplug(dev->link->ap, dev, event, 0); } static void ata_acpi_ap_notify(acpi_handle handle, u32 event, void *data) { struct ata_port *ap = data; - ata_acpi_handle_hotplug(ap, NULL, event); + ata_acpi_handle_hotplug(ap, NULL, event, 0); } /** @@ -252,7 +315,7 @@ void ata_acpi_associate(struct ata_host *host) ata_acpi_ap_notify, ap); /* we might be on a docking station */ register_hotplug_dock_device(ap->acpi_handle, - ata_acpi_ap_notify, ap); + ata_acpi_ap_notify_dock, ap); } for (j = 0; j < ata_link_max_devices(&ap->link); j++) { @@ -264,7 +327,7 @@ void ata_acpi_associate(struct ata_host *host) ata_acpi_dev_notify, dev); /* we might be on a docking station */ register_hotplug_dock_device(dev->acpi_handle, - ata_acpi_dev_notify, dev); + ata_acpi_dev_notify_dock, dev); } } } -- cgit v1.2.3 From e1fefea9cc4bc231b5c23fe19e3682fe061dc097 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 3 Jun 2008 18:59:02 +0200 Subject: [libata] ata_piix: more acer short cable quirks Add ICH6 on ACER Aspire 1694WLMi to list of laptops that use short cables rather than 80 wire OriginalAuthor: Tiago Sousa OriginalLocation: http://launchpadlibrarian.net/11627664/new.ich_laptop.short.cables.diff Bug: #187121 Signed-off-by: Colin Ian King Signed-off-by: maximilian attems Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 3548ee7014c..81b7ae37695 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -574,6 +574,8 @@ static const struct ich_laptop ich_laptop[] = { { 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */ { 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */ { 0x24CA, 0x1025, 0x0061 }, /* ICH4 on ACER Aspire 2023WLMi */ + { 0x24CA, 0x1025, 0x003d }, /* ICH4 on ACER TM290 */ + { 0x266F, 0x1025, 0x0066 }, /* ICH6 on ACER Aspire 1694WLMi */ { 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */ /* end marker */ { 0, } -- cgit v1.2.3 From ba069e376cc0801cd28352ca5986ce20413acb21 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Sat, 31 May 2008 16:46:34 -0400 Subject: sata_mv: PHY_MODE4 cleanups The handling for PHY_MODE4 was originally just cloned from the Marvell proprietary driver (with their blessing). But we can do better than that. Tidy things up with some judicious mask definitions, to improve maintainability. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index acf347f71a2..60391e9a84d 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -224,6 +224,11 @@ enum { PHY_MODE3 = 0x310, PHY_MODE4 = 0x314, + PHY_MODE4_CFG_MASK = 0x00000003, /* phy internal config field */ + PHY_MODE4_CFG_VALUE = 0x00000001, /* phy internal config field */ + PHY_MODE4_RSVD_ZEROS = 0x5de3fffa, /* Gen2e always write zeros */ + PHY_MODE4_RSVD_ONES = 0x00000005, /* Gen2e always write ones */ + PHY_MODE2 = 0x330, SATA_IFCTL_OFS = 0x344, SATA_TESTCTL_OFS = 0x348, @@ -2563,17 +2568,16 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, m3 &= ~0x1c; if (fix_phy_mode4) { - u32 m4; - - m4 = readl(port_mmio + PHY_MODE4); - - /* workaround for errata FEr SATA#10 (part 1) */ - m4 = (m4 & ~(1 << 1)) | (1 << 0); - - /* enforce bit restrictions on GenIIe devices */ + u32 m4 = readl(port_mmio + PHY_MODE4); + /* + * Enforce reserved-bit restrictions on GenIIe devices only. + * For earlier chipsets, force only the internal config field + * (workaround for errata FEr SATA#10 part 1). + */ if (IS_GEN_IIE(hpriv)) - m4 = (m4 & ~0x5DE3FFFC) | (1 << 2); - + m4 = (m4 & ~PHY_MODE4_RSVD_ZEROS) | PHY_MODE4_RSVD_ONES; + else + m4 = (m4 & ~PHY_MODE4_CFG_MASK) | PHY_MODE4_CFG_VALUE; writel(m4, port_mmio + PHY_MODE4); } /* -- cgit v1.2.3 From a57c1bade5a0ee5cd8b74502db9cbebb7f5780b2 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 29 May 2008 22:10:58 +0100 Subject: libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl - Make ata_sff_altstatus private so nobody uses it by mistake - Drop the 400nS delay from it Add ata_sff_irq_status - encapsulates the IRQ check logic This function keeps the existing behaviour for altstatus using devices. I actually suspect the logic was wrong before the changes but -rc isn't the time to play with that ata_sff_sync - ensure writes hit the device Really we want an io* operation for 'is posted' eg ioisposted(ioaddr) so that we can fix the nasty delay this causes on most systems. - ata_sff_pause - 400nS delay Ensure the command hit the device and delay 400nS - ata_sff_dma_pause Ensure the I/O hit the device and enforce an HDMA1:0 transition delay. Requires altstatus register exists, BUG if not so we don't risk corruption in MWDMA modes. (UDMA the checksum will save your backside in theory) The only other complication then is devices with their own handlers. rb532 can use dma_pause but scc needs to access its own altstatus register for internal errata workarounds so directly call the drivers own altstatus function. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/libata-sff.c | 115 ++++++++++++++++++++++++++++++++++++++------ drivers/ata/pata_icside.c | 2 +- drivers/ata/pata_rb532_cf.c | 4 +- drivers/ata/pata_scc.c | 5 +- 4 files changed, 107 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 3c2d2289f85..90d20c615ef 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -247,7 +247,7 @@ u8 ata_sff_check_status(struct ata_port *ap) * LOCKING: * Inherited from caller. */ -u8 ata_sff_altstatus(struct ata_port *ap) +static u8 ata_sff_altstatus(struct ata_port *ap) { if (ap->ops->sff_check_altstatus) return ap->ops->sff_check_altstatus(ap); @@ -255,6 +255,93 @@ u8 ata_sff_altstatus(struct ata_port *ap) return ioread8(ap->ioaddr.altstatus_addr); } +/** + * ata_sff_irq_status - Check if the device is busy + * @ap: port where the device is + * + * Determine if the port is currently busy. Uses altstatus + * if available in order to avoid clearing shared IRQ status + * when finding an IRQ source. Non ctl capable devices don't + * share interrupt lines fortunately for us. + * + * LOCKING: + * Inherited from caller. + */ +static u8 ata_sff_irq_status(struct ata_port *ap) +{ + u8 status; + + if (ap->ops->sff_check_altstatus || ap->ioaddr.altstatus_addr) { + status = ata_sff_altstatus(ap); + /* Not us: We are busy */ + if (status & ATA_BUSY) + return status; + } + /* Clear INTRQ latch */ + status = ata_sff_check_status(ap); + return status; +} + +/** + * ata_sff_sync - Flush writes + * @ap: Port to wait for. + * + * CAUTION: + * If we have an mmio device with no ctl and no altstatus + * method this will fail. No such devices are known to exist. + * + * LOCKING: + * Inherited from caller. + */ + +static void ata_sff_sync(struct ata_port *ap) +{ + if (ap->ops->sff_check_altstatus) + ap->ops->sff_check_altstatus(ap); + else if (ap->ioaddr.altstatus_addr) + ioread8(ap->ioaddr.altstatus_addr); +} + +/** + * ata_sff_pause - Flush writes and wait 400nS + * @ap: Port to pause for. + * + * CAUTION: + * If we have an mmio device with no ctl and no altstatus + * method this will fail. No such devices are known to exist. + * + * LOCKING: + * Inherited from caller. + */ + +void ata_sff_pause(struct ata_port *ap) +{ + ata_sff_sync(ap); + ndelay(400); +} + +/** + * ata_sff_dma_pause - Pause before commencing DMA + * @ap: Port to pause for. + * + * Perform I/O fencing and ensure sufficient cycle delays occur + * for the HDMA1:0 transition + */ + +void ata_sff_dma_pause(struct ata_port *ap) +{ + if (ap->ops->sff_check_altstatus || ap->ioaddr.altstatus_addr) { + /* An altstatus read will cause the needed delay without + messing up the IRQ status */ + ata_sff_altstatus(ap); + return; + } + /* There are no DMA controllers without ctl. BUG here to ensure + we never violate the HDMA1:0 transition timing and risk + corruption. */ + BUG(); +} + /** * ata_sff_busy_sleep - sleep until BSY clears, or timeout * @ap: port containing status register to be polled @@ -742,7 +829,7 @@ static void ata_pio_sectors(struct ata_queued_cmd *qc) } else ata_pio_sector(qc); - ata_sff_altstatus(qc->ap); /* flush */ + ata_sff_sync(qc->ap); /* flush */ } /** @@ -763,8 +850,9 @@ static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) WARN_ON(qc->dev->cdb_len < 12); ap->ops->sff_data_xfer(qc->dev, qc->cdb, qc->dev->cdb_len, 1); - ata_sff_altstatus(ap); /* flush */ - + ata_sff_sync(ap); + /* FIXME: If the CDB is for DMA do we need to do the transition delay + or is bmdma_start guaranteed to do it ? */ switch (qc->tf.protocol) { case ATAPI_PROT_PIO: ap->hsm_task_state = HSM_ST; @@ -905,7 +993,7 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc) if (unlikely(__atapi_pio_bytes(qc, bytes))) goto err_out; - ata_sff_altstatus(ap); /* flush */ + ata_sff_sync(ap); /* flush */ return; @@ -1489,14 +1577,10 @@ inline unsigned int ata_sff_host_intr(struct ata_port *ap, goto idle_irq; } - /* check altstatus */ - status = ata_sff_altstatus(ap); - if (status & ATA_BUSY) - goto idle_irq; - /* check main status, clearing INTRQ */ - status = ap->ops->sff_check_status(ap); - if (unlikely(status & ATA_BUSY)) + /* check main status, clearing INTRQ if needed */ + status = ata_sff_irq_status(ap); + if (status & ATA_BUSY) goto idle_irq; /* ack bmdma irq events */ @@ -2030,7 +2114,7 @@ void ata_sff_error_handler(struct ata_port *ap) ap->ops->bmdma_stop(qc); } - ata_sff_altstatus(ap); + ata_sff_sync(ap); /* FIXME: We don't need this */ ap->ops->sff_check_status(ap); ap->ops->sff_irq_clear(ap); @@ -2203,7 +2287,7 @@ void ata_bmdma_stop(struct ata_queued_cmd *qc) mmio + ATA_DMA_CMD); /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ - ata_sff_altstatus(ap); /* dummy read */ + ata_sff_dma_pause(ap); } /** @@ -2722,7 +2806,8 @@ EXPORT_SYMBOL_GPL(ata_sff_qc_prep); EXPORT_SYMBOL_GPL(ata_sff_dumb_qc_prep); EXPORT_SYMBOL_GPL(ata_sff_dev_select); EXPORT_SYMBOL_GPL(ata_sff_check_status); -EXPORT_SYMBOL_GPL(ata_sff_altstatus); +EXPORT_SYMBOL_GPL(ata_sff_dma_pause); +EXPORT_SYMBOL_GPL(ata_sff_pause); EXPORT_SYMBOL_GPL(ata_sff_busy_sleep); EXPORT_SYMBOL_GPL(ata_sff_wait_ready); EXPORT_SYMBOL_GPL(ata_sff_tf_load); diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c index 17138436423..cf9e9848f8b 100644 --- a/drivers/ata/pata_icside.c +++ b/drivers/ata/pata_icside.c @@ -270,7 +270,7 @@ static void pata_icside_bmdma_stop(struct ata_queued_cmd *qc) disable_dma(state->dma); /* see ata_bmdma_stop */ - ata_sff_altstatus(ap); + ata_sff_dma_pause(ap); } static u8 pata_icside_bmdma_status(struct ata_port *ap) diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c index a108d259f19..f8b3ffc8ae9 100644 --- a/drivers/ata/pata_rb532_cf.c +++ b/drivers/ata/pata_rb532_cf.c @@ -57,7 +57,9 @@ static inline void rb532_pata_finish_io(struct ata_port *ap) struct ata_host *ah = ap->host; struct rb532_cf_info *info = ah->private_data; - ata_sff_altstatus(ap); + /* FIXME: Keep previous delay. If this is merely a fence then + ata_sff_sync might be sufficient. */ + ata_sff_dma_pause(ap); ndelay(RB500_CF_IO_DELAY); set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH); diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index e965b251ca2..bbf5aa345e6 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -726,7 +726,7 @@ static void scc_bmdma_stop (struct ata_queued_cmd *qc) in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START); /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ - ata_sff_altstatus(ap); /* dummy read */ + ata_sff_dma_pause(ap); /* dummy read */ } /** @@ -747,7 +747,8 @@ static u8 scc_bmdma_status (struct ata_port *ap) return host_stat; /* errata A252,A308 workaround: Step4 */ - if ((ata_sff_altstatus(ap) & ATA_ERR) && (int_status & INTSTS_INTRQ)) + if ((scc_check_altstatus(ap) & ATA_ERR) + && (int_status & INTSTS_INTRQ)) return (host_stat | ATA_DMA_INTR); /* errata A308 workaround Step5 */ -- cgit v1.2.3 From a064d5bdd0c9602e4cd930ad949392640b37dda7 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 2 Jun 2008 10:59:02 +0100 Subject: ibmaem endianness annotations Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/hwmon/ibmaem.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c index 5c006c9a431..c9416e65748 100644 --- a/drivers/hwmon/ibmaem.c +++ b/drivers/hwmon/ibmaem.c @@ -189,8 +189,8 @@ static struct aem_iana_id system_x_id = { struct aem_find_firmware_req { struct aem_iana_id id; u8 rsvd; - u16 index; - u16 module_type_id; + __be16 index; + __be16 module_type_id; } __packed; struct aem_find_firmware_resp { @@ -202,7 +202,7 @@ struct aem_find_firmware_resp { struct aem_find_instance_req { struct aem_iana_id id; u8 instance_number; - u16 module_type_id; + __be16 module_type_id; } __packed; struct aem_find_instance_resp { @@ -444,17 +444,17 @@ static int aem_read_sensor(struct aem_data *data, u8 elt, u8 reg, } case 2: { u16 *x = buf; - *x = be16_to_cpup((u16 *)rs_resp->bytes); + *x = be16_to_cpup((__be16 *)rs_resp->bytes); break; } case 4: { u32 *x = buf; - *x = be32_to_cpup((u32 *)rs_resp->bytes); + *x = be32_to_cpup((__be32 *)rs_resp->bytes); break; } case 8: { u64 *x = buf; - *x = be64_to_cpup((u64 *)rs_resp->bytes); + *x = be64_to_cpup((__be64 *)rs_resp->bytes); break; } } -- cgit v1.2.3 From 76e6f2526ff69eba466f583d94beb7cf6b0bddd6 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 2 Jun 2008 10:59:02 +0100 Subject: usb/c67x00 endianness annotations Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/usb/c67x00/c67x00-ll-hpi.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/c67x00/c67x00-ll-hpi.c b/drivers/usb/c67x00/c67x00-ll-hpi.c index 5100fbbf6cb..a9636f43bca 100644 --- a/drivers/usb/c67x00/c67x00-ll-hpi.c +++ b/drivers/usb/c67x00/c67x00-ll-hpi.c @@ -120,7 +120,7 @@ static void hpi_write_word(struct c67x00_device *dev, u16 reg, u16 value) * Only data is little endian, addr has cpu endianess */ static void hpi_write_words_le16(struct c67x00_device *dev, u16 addr, - u16 *data, u16 count) + __le16 *data, u16 count) { unsigned long flags; int i; @@ -129,7 +129,7 @@ static void hpi_write_words_le16(struct c67x00_device *dev, u16 addr, hpi_write_reg(dev, HPI_ADDR, addr); for (i = 0; i < count; i++) - hpi_write_reg(dev, HPI_DATA, cpu_to_le16(*data++)); + hpi_write_reg(dev, HPI_DATA, le16_to_cpu(*data++)); spin_unlock_irqrestore(&dev->hpi.lock, flags); } @@ -138,7 +138,7 @@ static void hpi_write_words_le16(struct c67x00_device *dev, u16 addr, * Only data is little endian, addr has cpu endianess */ static void hpi_read_words_le16(struct c67x00_device *dev, u16 addr, - u16 *data, u16 count) + __le16 *data, u16 count) { unsigned long flags; int i; @@ -146,7 +146,7 @@ static void hpi_read_words_le16(struct c67x00_device *dev, u16 addr, spin_lock_irqsave(&dev->hpi.lock, flags); hpi_write_reg(dev, HPI_ADDR, addr); for (i = 0; i < count; i++) - *data++ = le16_to_cpu(hpi_read_reg(dev, HPI_DATA)); + *data++ = cpu_to_le16(hpi_read_reg(dev, HPI_DATA)); spin_unlock_irqrestore(&dev->hpi.lock, flags); } @@ -425,7 +425,7 @@ void c67x00_ll_write_mem_le16(struct c67x00_device *dev, u16 addr, len--; } - hpi_write_words_le16(dev, addr, (u16 *)buf, len / 2); + hpi_write_words_le16(dev, addr, (__le16 *)buf, len / 2); buf += len & ~0x01; addr += len & ~0x01; len &= 0x01; @@ -456,7 +456,7 @@ void c67x00_ll_read_mem_le16(struct c67x00_device *dev, u16 addr, len--; } - hpi_read_words_le16(dev, addr, (u16 *)buf, len / 2); + hpi_read_words_le16(dev, addr, (__le16 *)buf, len / 2); buf += len & ~0x01; addr += len & ~0x01; len &= 0x01; -- cgit v1.2.3 From fa4144b758d58341d4e082ac2af259e97fbcbeee Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 2 Jun 2008 10:59:02 +0100 Subject: cdc-wdm endianness fixes * wMaxPacketSize is le16; copying it to a field of local structure and then using that field as host-endian (size of object to be allocated) is broken. * bMaxPacketSize0 is 8-bit; feeding it to le16_to_cpu() is bogus and since the result is used as host-endian, it's not even misspelled cpu_to_le16(). Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/usb/class/cdc-wdm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 107666d4e2e..731db051070 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -611,8 +611,8 @@ next_desc: goto err; } - desc->wMaxPacketSize = ep->wMaxPacketSize; - desc->bMaxPacketSize0 = cpu_to_le16(udev->descriptor.bMaxPacketSize0); + desc->wMaxPacketSize = le16_to_cpu(ep->wMaxPacketSize); + desc->bMaxPacketSize0 = udev->descriptor.bMaxPacketSize0; desc->orq = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL); if (!desc->orq) -- cgit v1.2.3 From 6399e7acbf9193c7d48827329ca592a1c8dc9e69 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 2 Jun 2008 10:59:02 +0100 Subject: isp1760-if iomem annotations Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/usb/host/isp1760-if.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c index 440bf94f0d4..c9db3fe9872 100644 --- a/drivers/usb/host/isp1760-if.c +++ b/drivers/usb/host/isp1760-if.c @@ -104,8 +104,8 @@ static u32 nxp_pci_io_base; static u32 iolength; static u32 pci_mem_phy0; static u32 length; -static u8 *chip_addr; -static u8 *iobase; +static u8 __iomem *chip_addr; +static u8 __iomem *iobase; static int __devinit isp1761_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) -- cgit v1.2.3 From 1a79d1c37178935a3092f73c8832933e9fed1f66 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 2 Jun 2008 10:59:02 +0100 Subject: s2io iomem annotations Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/net/s2io.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index a20693e09ae..b5c1e663417 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -2861,7 +2861,8 @@ static int s2io_poll_msix(struct napi_struct *napi, int budget) struct config_param *config; struct mac_info *mac_control; int pkts_processed = 0; - u8 *addr = NULL, val8 = 0; + u8 __iomem *addr = NULL; + u8 val8 = 0; struct s2io_nic *nic = dev->priv; struct XENA_dev_config __iomem *bar0 = nic->bar0; int budget_org = budget; @@ -2878,7 +2879,7 @@ static int s2io_poll_msix(struct napi_struct *napi, int budget) if (pkts_processed < budget_org) { netif_rx_complete(dev, napi); /*Re Enable MSI-Rx Vector*/ - addr = (u8 *)&bar0->xmsi_mask_reg; + addr = (u8 __iomem *)&bar0->xmsi_mask_reg; addr += 7 - ring->ring_no; val8 = (ring->ring_no == 0) ? 0x3f : 0xbf; writeb(val8, addr); @@ -4364,9 +4365,10 @@ static irqreturn_t s2io_msix_ring_handle(int irq, void *dev_id) return IRQ_HANDLED; if (sp->config.napi) { - u8 *addr = NULL, val8 = 0; + u8 __iomem *addr = NULL; + u8 val8 = 0; - addr = (u8 *)&bar0->xmsi_mask_reg; + addr = (u8 __iomem *)&bar0->xmsi_mask_reg; addr += (7 - ring->ring_no); val8 = (ring->ring_no == 0) ? 0x7f : 0xff; writeb(val8, addr); -- cgit v1.2.3 From 9b62d864314736fb6cc5c5db5b964d4a3c093424 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Wed, 21 May 2008 17:26:15 +0800 Subject: [MTD] [NAND] pxa: fix incorrect calling of pxa3xx_nand_config() on resume path Signed-off-by: Eric Miao Signed-off-by: David Woodhouse --- drivers/mtd/nand/pxa3xx_nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index fceb468ccde..fe2bc7e4211 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -1216,7 +1216,7 @@ static int pxa3xx_nand_resume(struct platform_device *pdev) clk_enable(info->clk); - return pxa3xx_nand_config_flash(info); + return pxa3xx_nand_config_flash(info, info->flash_info); } #else #define pxa3xx_nand_suspend NULL -- cgit v1.2.3 From edeb280e49d38a5330db25463ef45f5466b0058a Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 4 Jun 2008 10:35:03 -0700 Subject: Fix uart_set_ldisc() function type Commit 64e9159f5d2c4edf5fa6425031e556f8fddaf7e6 ("serial_core: uart_set_ldisc infrastructure") introduced the ability for low-level serial drivers to be informed when the tty ldisc changes. However, the actual tty-layer function that does this callback for serial devices was declared with the wrong type, having a spurious and unused 'ldisc' argument. This fixed the resulting compiler warning by just removing it. Acked-by: Blithering Idiot Signed-off-by: Linus Torvalds --- drivers/serial/serial_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 951a75ea6e3..c9b64e73c98 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -1165,7 +1165,7 @@ out: return ret; } -static void uart_set_ldisc(struct tty_struct *tty, int ldisc) +static void uart_set_ldisc(struct tty_struct *tty) { struct uart_state *state = tty->driver_data; struct uart_port *port = state->port; -- cgit v1.2.3 From c03e05d81d70879273488206bfcb1805ebca9612 Mon Sep 17 00:00:00 2001 From: Mark Asselstine Date: Wed, 4 Jun 2008 12:06:28 -0700 Subject: sunhme: Cleanup use of deprecated calls to save_and_cli and restore_flags. Make use of local_irq_save and local_irq_restore rather then the deprecated save_and_cli and restore_flags calls. Signed-off-by: Mark Asselstine Signed-off-by: David S. Miller --- drivers/net/sunhme.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sunhme.c b/drivers/net/sunhme.c index b4e7f30ea4e..1aa425be306 100644 --- a/drivers/net/sunhme.c +++ b/drivers/net/sunhme.c @@ -111,7 +111,7 @@ static __inline__ void tx_add_log(struct happy_meal *hp, unsigned int a, unsigne struct hme_tx_logent *tlp; unsigned long flags; - save_and_cli(flags); + local_irq_save(flags); tlp = &tx_log[txlog_cur_entry]; tlp->tstamp = (unsigned int)jiffies; tlp->tx_new = hp->tx_new; @@ -119,7 +119,7 @@ static __inline__ void tx_add_log(struct happy_meal *hp, unsigned int a, unsigne tlp->action = a; tlp->status = s; txlog_cur_entry = (txlog_cur_entry + 1) & (TX_LOG_LEN - 1); - restore_flags(flags); + local_irq_restore(flags); } static __inline__ void tx_dump_log(void) { -- cgit v1.2.3 From 48e6c51bd326ce9faf07fbdf84d361c9755b7035 Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Thu, 22 May 2008 17:06:36 +0200 Subject: b43legacy: Fix controller restart crash This fixes a kernel crash on rmmod, in the case where the controller was restarted before doing the rmmod. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/net/wireless/b43legacy/main.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c index 14a5eea2573..204077c1387 100644 --- a/drivers/net/wireless/b43legacy/main.c +++ b/drivers/net/wireless/b43legacy/main.c @@ -3039,7 +3039,6 @@ static void b43legacy_set_pretbtt(struct b43legacy_wldev *dev) /* Locking: wl->mutex */ static void b43legacy_wireless_core_exit(struct b43legacy_wldev *dev) { - struct b43legacy_wl *wl = dev->wl; struct b43legacy_phy *phy = &dev->phy; u32 macctl; @@ -3054,12 +3053,6 @@ static void b43legacy_wireless_core_exit(struct b43legacy_wldev *dev) macctl |= B43legacy_MACCTL_PSM_JMP0; b43legacy_write32(dev, B43legacy_MMIO_MACCTL, macctl); - mutex_unlock(&wl->mutex); - /* Must unlock as it would otherwise deadlock. No races here. - * Cancel possibly pending workqueues. */ - cancel_work_sync(&dev->restart_work); - mutex_lock(&wl->mutex); - b43legacy_leds_exit(dev); b43legacy_rng_exit(dev->wl); b43legacy_pio_free(dev); @@ -3486,6 +3479,8 @@ static void b43legacy_chip_reset(struct work_struct *work) } } out: + if (err) + wl->current_dev = NULL; /* Failed to init the dev. */ mutex_unlock(&wl->mutex); if (err) b43legacyerr(wl, "Controller restart FAILED\n"); @@ -3618,9 +3613,11 @@ static void b43legacy_one_core_detach(struct ssb_device *dev) struct b43legacy_wldev *wldev; struct b43legacy_wl *wl; + /* Do not cancel ieee80211-workqueue based work here. + * See comment in b43legacy_remove(). */ + wldev = ssb_get_drvdata(dev); wl = wldev->wl; - cancel_work_sync(&wldev->restart_work); b43legacy_debugfs_remove_device(wldev); b43legacy_wireless_core_detach(wldev); list_del(&wldev->list); @@ -3789,6 +3786,10 @@ static void b43legacy_remove(struct ssb_device *dev) struct b43legacy_wl *wl = ssb_get_devtypedata(dev); struct b43legacy_wldev *wldev = ssb_get_drvdata(dev); + /* We must cancel any work here before unregistering from ieee80211, + * as the ieee80211 unreg will destroy the workqueue. */ + cancel_work_sync(&wldev->restart_work); + B43legacy_WARN_ON(!wl); if (wl->current_dev == wldev) ieee80211_unregister_hw(wl->hw); -- cgit v1.2.3 From b212f3378a9cfca4da52d7c7e6f79ead8ec287fc Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 28 May 2008 12:40:39 -0700 Subject: airo warning fix WARNING: space prohibited between function name and open parenthesis '(' #22: FILE: drivers/net/wireless/airo.c:2907: + while ((IN4500 (ai, COMMAND) & COMMAND_BUSY) && (delay < 10000)) { total: 0 errors, 1 warnings, 8 lines checked ./patches/wireless-airo-waitbusy-wont-delay.patch has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Dan Williams Cc: Roel Kluin Signed-off-by: Andrew Morton Signed-off-by: John W. Linville --- drivers/net/wireless/airo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index 4e1c690ff45..32019fb878d 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -2905,7 +2905,7 @@ EXPORT_SYMBOL(init_airo_card); static int waitbusy (struct airo_info *ai) { int delay = 0; - while ((IN4500 (ai, COMMAND) & COMMAND_BUSY) && (delay < 10000)) { + while ((IN4500(ai, COMMAND) & COMMAND_BUSY) && (delay < 10000)) { udelay (10); if ((++delay % 20) == 0) OUT4500(ai, EVACK, EV_CLEARCOMMANDBUSY); -- cgit v1.2.3 From a6d4eae80157830af9c9d80de2daf6611696a34e Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 29 May 2008 14:38:28 -0400 Subject: ipw2200: expire and use oldest BSS on adhoc create If there are no networks on the free list, expire the oldest one when creating a new adhoc network. Because ipw2200 and the ieee80211 stack don't actually cull old networks and place them back on the free list unless they are needed for new probe responses, over time the free list would become empty and creating an adhoc network would fail due to the ! list_empty(...) check. Signed-off-by: Dan Williams Signed-off-by: John W. Linville --- drivers/net/wireless/ipw2200.c | 27 +++++++++++++++++++++++++-- 1 file changed, 25 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index d74c061994a..72933677482 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -7558,8 +7558,31 @@ static int ipw_associate(void *data) priv->ieee->iw_mode == IW_MODE_ADHOC && priv->config & CFG_ADHOC_CREATE && priv->config & CFG_STATIC_ESSID && - priv->config & CFG_STATIC_CHANNEL && - !list_empty(&priv->ieee->network_free_list)) { + priv->config & CFG_STATIC_CHANNEL) { + /* Use oldest network if the free list is empty */ + if (list_empty(&priv->ieee->network_free_list)) { + struct ieee80211_network *oldest = NULL; + struct ieee80211_network *target; + DECLARE_MAC_BUF(mac); + + list_for_each_entry(target, &priv->ieee->network_list, list) { + if ((oldest == NULL) || + (target->last_scanned < oldest->last_scanned)) + oldest = target; + } + + /* If there are no more slots, expire the oldest */ + list_del(&oldest->list); + target = oldest; + IPW_DEBUG_ASSOC("Expired '%s' (%s) from " + "network list.\n", + escape_essid(target->ssid, + target->ssid_len), + print_mac(mac, target->bssid)); + list_add_tail(&target->list, + &priv->ieee->network_free_list); + } + element = priv->ieee->network_free_list.next; network = list_entry(element, struct ieee80211_network, list); ipw_adhoc_create(priv, network); -- cgit v1.2.3 From a75eda43dc4a64d0bd0502da546871c01f70e899 Mon Sep 17 00:00:00 2001 From: Holger Schurig Date: Fri, 30 May 2008 14:53:22 +0200 Subject: libertas: fix command size for CMD_802_11_SUBSCRIBE_EVENT The size was two small by two bytes. Signed-off-by: Holger Schurig Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/debugfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/libertas/debugfs.c b/drivers/net/wireless/libertas/debugfs.c index ad2fabca911..0aa0ce3b2c4 100644 --- a/drivers/net/wireless/libertas/debugfs.c +++ b/drivers/net/wireless/libertas/debugfs.c @@ -312,8 +312,8 @@ static ssize_t lbs_threshold_write(uint16_t tlv_type, uint16_t event_mask, if (tlv_type != TLV_TYPE_BCNMISS) tlv->freq = freq; - /* The command header, the event mask, and the one TLV */ - events->hdr.size = cpu_to_le16(sizeof(events->hdr) + 2 + sizeof(*tlv)); + /* The command header, the action, the event mask, and one TLV */ + events->hdr.size = cpu_to_le16(sizeof(events->hdr) + 4 + sizeof(*tlv)); ret = lbs_cmd_with_response(priv, CMD_802_11_SUBSCRIBE_EVENT, events); -- cgit v1.2.3 From a3bafeedfff2ac5fa0a316bea4570e27900b6fcc Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Mon, 2 Jun 2008 16:15:23 +0200 Subject: ssb: Fix context assertion in ssb_pcicore_dev_irqvecs_enable This fixes a context assertion in ssb that makes b44 print out warnings on resume. This fixes the following kernel oops: http://www.kerneloops.org/oops.php?number=12732 http://www.kerneloops.org/oops.php?number=11410 Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/ssb/driver_pcicore.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c index 75def13e797..d28c5386809 100644 --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c @@ -537,12 +537,12 @@ int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc, int err = 0; u32 tmp; - might_sleep(); - if (!pdev) goto out; bus = pdev->bus; + might_sleep_if(pdev->id.coreid != SSB_DEV_PCI); + /* Enable interrupts for this device. */ if (bus->host_pci && ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE))) { -- cgit v1.2.3 From 4546002c813568829b70d00fab752de3999c3f1a Mon Sep 17 00:00:00 2001 From: Felix Homann Date: Thu, 29 May 2008 00:36:45 -0700 Subject: USB ID for Philips CPWUA054/00 Wireless USB Adapter 11g Enable the Philips CPWUA054/00 in p54usb. Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54usb.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c index 98ddbb3b327..1610a7308c1 100644 --- a/drivers/net/wireless/p54/p54usb.c +++ b/drivers/net/wireless/p54/p54usb.c @@ -49,6 +49,7 @@ static struct usb_device_id p54u_table[] __devinitdata = { {USB_DEVICE(0x5041, 0x2235)}, /* Linksys WUSB54G Portable */ /* Version 2 devices (3887) */ + {USB_DEVICE(0x0471, 0x1230)}, /* Philips CPWUA054/00 */ {USB_DEVICE(0x050d, 0x7050)}, /* Belkin F5D7050 ver 1000 */ {USB_DEVICE(0x0572, 0x2000)}, /* Cohiba Proto board */ {USB_DEVICE(0x0572, 0x2002)}, /* Cohiba Proto board */ -- cgit v1.2.3 From 199f7d24ae59894243687a234a909f44a8724506 Mon Sep 17 00:00:00 2001 From: James Chapman Date: Wed, 4 Jun 2008 15:07:32 -0700 Subject: lt2p: Fix possible WARN_ON from socket code when UDP socket is closed If an L2TP daemon closes a tunnel socket while packets are queued in the tunnel's reorder queue, a kernel warning is logged because the socket is closed while skbs are still referencing it. The fix is to purge the queue in the socket's release handler. WARNING: at include/net/sock.h:351 udp_lib_unhash+0x41/0x68() Pid: 12998, comm: openl2tpd Not tainted 2.6.25 #8 [] warn_on_slowpath+0x41/0x51 [] udp_lib_unhash+0x41/0x68 [] sk_common_release+0x23/0x90 [] udp_lib_close+0x8/0xa [] inet_release+0x42/0x48 [] sock_release+0x14/0x60 [] sock_close+0x29/0x30 [] __fput+0xad/0x15b [] fput+0x17/0x19 [] filp_close+0x50/0x5a [] sys_close+0x69/0x9f [] syscall_call+0x7/0xb Signed-off-by: James Chapman Signed-off-by: David S. Miller --- drivers/net/pppol2tp.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c index 8db342f2fdc..04c7e5b407f 100644 --- a/drivers/net/pppol2tp.c +++ b/drivers/net/pppol2tp.c @@ -1279,6 +1279,7 @@ out: static int pppol2tp_release(struct socket *sock) { struct sock *sk = sock->sk; + struct pppol2tp_session *session; int error; if (!sk) @@ -1296,9 +1297,18 @@ static int pppol2tp_release(struct socket *sock) sock_orphan(sk); sock->sk = NULL; + session = pppol2tp_sock_to_session(sk); + /* Purge any queued data */ skb_queue_purge(&sk->sk_receive_queue); skb_queue_purge(&sk->sk_write_queue); + if (session != NULL) { + struct sk_buff *skb; + while ((skb = skb_dequeue(&session->reorder_q))) { + kfree_skb(skb); + sock_put(sk); + } + } release_sock(sk); -- cgit v1.2.3 From 24b95685ffcdb3dc28f64b9e8af6ea3e8360fbc5 Mon Sep 17 00:00:00 2001 From: James Chapman Date: Wed, 4 Jun 2008 15:54:07 -0700 Subject: l2tp: Fix possible oops if transmitting or receiving when tunnel goes down Some problems have been experienced in the field which cause an oops in the pppol2tp driver if L2TP tunnels fail while passing data. The pppol2tp driver uses private data that is referenced via the sk->sk_user_data of its UDP and PPPoL2TP sockets. This patch makes sure that the driver uses sock_hold() when it holds a reference to the sk pointer. This affects its sendmsg(), recvmsg(), getname(), [gs]etsockopt() and ioctl() handlers. Tested by ISP where problem was seen. System has been up 10 days with no oops since running this patch. Without the patch, an oops would occur every 1-2 days. Signed-off-by: James Chapman Signed-off-by: David S. Miller --- drivers/net/pppol2tp.c | 101 ++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 78 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c index 04c7e5b407f..70cfdb46aa2 100644 --- a/drivers/net/pppol2tp.c +++ b/drivers/net/pppol2tp.c @@ -240,12 +240,15 @@ static inline struct pppol2tp_session *pppol2tp_sock_to_session(struct sock *sk) if (sk == NULL) return NULL; + sock_hold(sk); session = (struct pppol2tp_session *)(sk->sk_user_data); - if (session == NULL) - return NULL; + if (session == NULL) { + sock_put(sk); + goto out; + } BUG_ON(session->magic != L2TP_SESSION_MAGIC); - +out: return session; } @@ -256,12 +259,15 @@ static inline struct pppol2tp_tunnel *pppol2tp_sock_to_tunnel(struct sock *sk) if (sk == NULL) return NULL; + sock_hold(sk); tunnel = (struct pppol2tp_tunnel *)(sk->sk_user_data); - if (tunnel == NULL) - return NULL; + if (tunnel == NULL) { + sock_put(sk); + goto out; + } BUG_ON(tunnel->magic != L2TP_TUNNEL_MAGIC); - +out: return tunnel; } @@ -716,12 +722,14 @@ discard: session->stats.rx_errors++; kfree_skb(skb); sock_put(session->sock); + sock_put(sock); return 0; error: /* Put UDP header back */ __skb_push(skb, sizeof(struct udphdr)); + sock_put(sock); no_tunnel: return 1; @@ -745,10 +753,13 @@ static int pppol2tp_udp_encap_recv(struct sock *sk, struct sk_buff *skb) "%s: received %d bytes\n", tunnel->name, skb->len); if (pppol2tp_recv_core(sk, skb)) - goto pass_up; + goto pass_up_put; + sock_put(sk); return 0; +pass_up_put: + sock_put(sk); pass_up: return 1; } @@ -858,7 +869,7 @@ static int pppol2tp_sendmsg(struct kiocb *iocb, struct socket *sock, struct msgh tunnel = pppol2tp_sock_to_tunnel(session->tunnel_sock); if (tunnel == NULL) - goto error; + goto error_put_sess; /* What header length is configured for this session? */ hdr_len = pppol2tp_l2tp_header_len(session); @@ -870,7 +881,7 @@ static int pppol2tp_sendmsg(struct kiocb *iocb, struct socket *sock, struct msgh sizeof(ppph) + total_len, 0, GFP_KERNEL); if (!skb) - goto error; + goto error_put_sess_tun; /* Reserve space for headers. */ skb_reserve(skb, NET_SKB_PAD); @@ -900,7 +911,7 @@ static int pppol2tp_sendmsg(struct kiocb *iocb, struct socket *sock, struct msgh error = memcpy_fromiovec(skb->data, m->msg_iov, total_len); if (error < 0) { kfree_skb(skb); - goto error; + goto error_put_sess_tun; } skb_put(skb, total_len); @@ -947,10 +958,33 @@ static int pppol2tp_sendmsg(struct kiocb *iocb, struct socket *sock, struct msgh session->stats.tx_errors++; } + return error; + +error_put_sess_tun: + sock_put(session->tunnel_sock); +error_put_sess: + sock_put(sk); error: return error; } +/* Automatically called when the skb is freed. + */ +static void pppol2tp_sock_wfree(struct sk_buff *skb) +{ + sock_put(skb->sk); +} + +/* For data skbs that we transmit, we associate with the tunnel socket + * but don't do accounting. + */ +static inline void pppol2tp_skb_set_owner_w(struct sk_buff *skb, struct sock *sk) +{ + sock_hold(sk); + skb->sk = sk; + skb->destructor = pppol2tp_sock_wfree; +} + /* Transmit function called by generic PPP driver. Sends PPP frame * over PPPoL2TP socket. * @@ -993,10 +1027,10 @@ static int pppol2tp_xmit(struct ppp_channel *chan, struct sk_buff *skb) sk_tun = session->tunnel_sock; if (sk_tun == NULL) - goto abort; + goto abort_put_sess; tunnel = pppol2tp_sock_to_tunnel(sk_tun); if (tunnel == NULL) - goto abort; + goto abort_put_sess; /* What header length is configured for this session? */ hdr_len = pppol2tp_l2tp_header_len(session); @@ -1009,7 +1043,7 @@ static int pppol2tp_xmit(struct ppp_channel *chan, struct sk_buff *skb) sizeof(struct udphdr) + hdr_len + sizeof(ppph); old_headroom = skb_headroom(skb); if (skb_cow_head(skb, headroom)) - goto abort; + goto abort_put_sess_tun; new_headroom = skb_headroom(skb); skb_orphan(skb); @@ -1069,7 +1103,7 @@ static int pppol2tp_xmit(struct ppp_channel *chan, struct sk_buff *skb) /* Get routing info from the tunnel socket */ dst_release(skb->dst); skb->dst = dst_clone(__sk_dst_get(sk_tun)); - skb->sk = sk_tun; + pppol2tp_skb_set_owner_w(skb, sk_tun); /* Queue the packet to IP for output */ len = skb->len; @@ -1086,8 +1120,14 @@ static int pppol2tp_xmit(struct ppp_channel *chan, struct sk_buff *skb) session->stats.tx_errors++; } + sock_put(sk_tun); + sock_put(sk); return 1; +abort_put_sess_tun: + sock_put(sk_tun); +abort_put_sess: + sock_put(sk); abort: /* Free the original skb */ kfree_skb(skb); @@ -1191,7 +1231,7 @@ static void pppol2tp_tunnel_destruct(struct sock *sk) { struct pppol2tp_tunnel *tunnel; - tunnel = pppol2tp_sock_to_tunnel(sk); + tunnel = sk->sk_user_data; if (tunnel == NULL) goto end; @@ -1230,10 +1270,12 @@ static void pppol2tp_session_destruct(struct sock *sk) if (sk->sk_user_data != NULL) { struct pppol2tp_tunnel *tunnel; - session = pppol2tp_sock_to_session(sk); + session = sk->sk_user_data; if (session == NULL) goto out; + BUG_ON(session->magic != L2TP_SESSION_MAGIC); + /* Don't use pppol2tp_sock_to_tunnel() here to * get the tunnel context because the tunnel * socket might have already been closed (its @@ -1611,7 +1653,7 @@ static int pppol2tp_connect(struct socket *sock, struct sockaddr *uservaddr, error = ppp_register_channel(&po->chan); if (error) - goto end; + goto end_put_tun; /* This is how we get the session context from the socket. */ sk->sk_user_data = session; @@ -1631,6 +1673,8 @@ out_no_ppp: PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO, "%s: created\n", session->name); +end_put_tun: + sock_put(tunnel_sock); end: release_sock(sk); @@ -1678,6 +1722,7 @@ static int pppol2tp_getname(struct socket *sock, struct sockaddr *uaddr, *usockaddr_len = len; error = 0; + sock_put(sock->sk); end: return error; @@ -1916,14 +1961,17 @@ static int pppol2tp_ioctl(struct socket *sock, unsigned int cmd, err = -EBADF; tunnel = pppol2tp_sock_to_tunnel(session->tunnel_sock); if (tunnel == NULL) - goto end; + goto end_put_sess; err = pppol2tp_tunnel_ioctl(tunnel, cmd, arg); - goto end; + sock_put(session->tunnel_sock); + goto end_put_sess; } err = pppol2tp_session_ioctl(session, cmd, arg); +end_put_sess: + sock_put(sk); end: return err; } @@ -2069,14 +2117,17 @@ static int pppol2tp_setsockopt(struct socket *sock, int level, int optname, err = -EBADF; tunnel = pppol2tp_sock_to_tunnel(session->tunnel_sock); if (tunnel == NULL) - goto end; + goto end_put_sess; err = pppol2tp_tunnel_setsockopt(sk, tunnel, optname, val); + sock_put(session->tunnel_sock); } else err = pppol2tp_session_setsockopt(sk, session, optname, val); err = 0; +end_put_sess: + sock_put(sk); end: return err; } @@ -2191,20 +2242,24 @@ static int pppol2tp_getsockopt(struct socket *sock, int level, err = -EBADF; tunnel = pppol2tp_sock_to_tunnel(session->tunnel_sock); if (tunnel == NULL) - goto end; + goto end_put_sess; err = pppol2tp_tunnel_getsockopt(sk, tunnel, optname, &val); + sock_put(session->tunnel_sock); } else err = pppol2tp_session_getsockopt(sk, session, optname, &val); err = -EFAULT; if (put_user(len, (int __user *) optlen)) - goto end; + goto end_put_sess; if (copy_to_user((void __user *) optval, &val, len)) - goto end; + goto end_put_sess; err = 0; + +end_put_sess: + sock_put(sk); end: return err; } -- cgit v1.2.3 From ba75321193900a236bc5bbc29145e1039f74eb1b Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Wed, 7 May 2008 11:54:10 +0900 Subject: [MTD] [MAPS] Fix cmdlineparse handling in mapping files Now it returns the 0 if cmdlineparse not supplied. Signed-off-by: Kyungmin Park Signed-off-by: David Woodhouse --- drivers/mtd/maps/omap_nor.c | 2 +- drivers/mtd/onenand/generic.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/maps/omap_nor.c b/drivers/mtd/maps/omap_nor.c index 240b0e2d095..c12d8056beb 100644 --- a/drivers/mtd/maps/omap_nor.c +++ b/drivers/mtd/maps/omap_nor.c @@ -110,7 +110,7 @@ static int __init omapflash_probe(struct platform_device *pdev) err = parse_mtd_partitions(info->mtd, part_probes, &info->parts, 0); if (err > 0) add_mtd_partitions(info->mtd, info->parts, err); - else if (err < 0 && pdata->parts) + else if (err <= 0 && pdata->parts) add_mtd_partitions(info->mtd, pdata->parts, pdata->nr_parts); else #endif diff --git a/drivers/mtd/onenand/generic.c b/drivers/mtd/onenand/generic.c index 3d44d040a47..ad81ab8e95e 100644 --- a/drivers/mtd/onenand/generic.c +++ b/drivers/mtd/onenand/generic.c @@ -76,7 +76,7 @@ static int __devinit generic_onenand_probe(struct device *dev) err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0); if (err > 0) add_mtd_partitions(&info->mtd, info->parts, err); - else if (err < 0 && pdata->parts) + else if (err <= 0 && pdata->parts) add_mtd_partitions(&info->mtd, pdata->parts, pdata->nr_parts); else #endif -- cgit v1.2.3 From daf20d95bff81c6fc8a8d8160e620e1f9581af02 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 12 May 2008 11:21:58 -0300 Subject: V4L/DVB (7885): ivtv/cx18: add compat_ioctl entries Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx18/cx18-streams.c | 13 +++++++------ drivers/media/video/ivtv/ivtv-streams.c | 30 ++++++++++++++++-------------- 2 files changed, 23 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c index 4ca9d847f1b..dee6cc98809 100644 --- a/drivers/media/video/cx18/cx18-streams.c +++ b/drivers/media/video/cx18/cx18-streams.c @@ -36,12 +36,13 @@ #define CX18_DSP0_INTERRUPT_MASK 0xd0004C static struct file_operations cx18_v4l2_enc_fops = { - .owner = THIS_MODULE, - .read = cx18_v4l2_read, - .open = cx18_v4l2_open, - .ioctl = cx18_v4l2_ioctl, - .release = cx18_v4l2_close, - .poll = cx18_v4l2_enc_poll, + .owner = THIS_MODULE, + .read = cx18_v4l2_read, + .open = cx18_v4l2_open, + .ioctl = cx18_v4l2_ioctl, + .compat_ioctl = v4l_compat_ioctl32, + .release = cx18_v4l2_close, + .poll = cx18_v4l2_enc_poll, }; /* offset from 0 to register ts v4l2 minors on */ diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c index c47c2b94514..c854285a437 100644 --- a/drivers/media/video/ivtv/ivtv-streams.c +++ b/drivers/media/video/ivtv/ivtv-streams.c @@ -44,23 +44,25 @@ #include "ivtv-streams.h" static const struct file_operations ivtv_v4l2_enc_fops = { - .owner = THIS_MODULE, - .read = ivtv_v4l2_read, - .write = ivtv_v4l2_write, - .open = ivtv_v4l2_open, - .ioctl = ivtv_v4l2_ioctl, - .release = ivtv_v4l2_close, - .poll = ivtv_v4l2_enc_poll, + .owner = THIS_MODULE, + .read = ivtv_v4l2_read, + .write = ivtv_v4l2_write, + .open = ivtv_v4l2_open, + .ioctl = ivtv_v4l2_ioctl, + .compat_ioctl = v4l_compat_ioctl32, + .release = ivtv_v4l2_close, + .poll = ivtv_v4l2_enc_poll, }; static const struct file_operations ivtv_v4l2_dec_fops = { - .owner = THIS_MODULE, - .read = ivtv_v4l2_read, - .write = ivtv_v4l2_write, - .open = ivtv_v4l2_open, - .ioctl = ivtv_v4l2_ioctl, - .release = ivtv_v4l2_close, - .poll = ivtv_v4l2_dec_poll, + .owner = THIS_MODULE, + .read = ivtv_v4l2_read, + .write = ivtv_v4l2_write, + .open = ivtv_v4l2_open, + .ioctl = ivtv_v4l2_ioctl, + .compat_ioctl = v4l_compat_ioctl32, + .release = ivtv_v4l2_close, + .poll = ivtv_v4l2_dec_poll, }; #define IVTV_V4L2_DEC_MPG_OFFSET 16 /* offset from 0 to register decoder mpg v4l2 minors on */ -- cgit v1.2.3 From 81b8021a71c194752e8bbb29328cecc744a47b2b Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 14 May 2008 23:14:04 -0300 Subject: V4L/DVB (7901): zoran: use correct type for CPU flags locking-add-typecheck-on-irqsave-and-friends-for-correct-flags.patch will cause drivers/media/video/zoran_driver.c: In function 'zoran_close_end_session': drivers/media/video/zoran_driver.c:1172: warning: comparison of distinct pointer types lacks a cast Signed-off-by: Andrew Morton Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/zoran_driver.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/zoran_driver.c b/drivers/media/video/zoran_driver.c index 345c77e4683..b75313d8c3a 100644 --- a/drivers/media/video/zoran_driver.c +++ b/drivers/media/video/zoran_driver.c @@ -1167,7 +1167,7 @@ zoran_close_end_session (struct file *file) /* v4l capture */ if (fh->v4l_buffers.active != ZORAN_FREE) { - long flags; + unsigned long flags; spin_lock_irqsave(&zr->spinlock, flags); zr36057_set_memgrab(zr, 0); @@ -3436,7 +3436,7 @@ zoran_do_ioctl (struct inode *inode, /* unload capture */ if (zr->v4l_memgrab_active) { - long flags; + unsigned long flags; spin_lock_irqsave(&zr->spinlock, flags); zr36057_set_memgrab(zr, 0); @@ -4375,7 +4375,7 @@ zoran_vm_close (struct vm_area_struct *vma) mutex_lock(&zr->resource_lock); if (fh->v4l_buffers.active != ZORAN_FREE) { - long flags; + unsigned long flags; spin_lock_irqsave(&zr->spinlock, flags); zr36057_set_memgrab(zr, 0); -- cgit v1.2.3 From 4277106b4fb6edd8f52b0653841faebbf7160480 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Sun, 11 May 2008 19:51:07 -0300 Subject: V4L/DVB (7902): fix handling of tea5761_autodetection return value tea5761_autodetection returns -EINVAL on error Signed-off-by: Marcin Slusarz Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/tea5761.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/common/tuners/tea5761.c b/drivers/media/common/tuners/tea5761.c index b93cdef9ac7..b23dadeecd0 100644 --- a/drivers/media/common/tuners/tea5761.c +++ b/drivers/media/common/tuners/tea5761.c @@ -295,7 +295,7 @@ struct dvb_frontend *tea5761_attach(struct dvb_frontend *fe, { struct tea5761_priv *priv = NULL; - if (tea5761_autodetection(i2c_adap, i2c_addr) == EINVAL) + if (tea5761_autodetection(i2c_adap, i2c_addr) != 0) return NULL; priv = kzalloc(sizeof(struct tea5761_priv), GFP_KERNEL); -- cgit v1.2.3 From 7fa7b8583f14889aaceebcd8dca3093987e289f7 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Sun, 11 May 2008 19:53:39 -0300 Subject: V4L/DVB (7903): gp8psk_power_ctrl should return negative errors Signed-off-by: Marcin Slusarz Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/gp8psk.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/dvb-usb/gp8psk.c b/drivers/media/dvb/dvb-usb/gp8psk.c index 9a942afaf0a..2653120673b 100644 --- a/drivers/media/dvb/dvb-usb/gp8psk.c +++ b/drivers/media/dvb/dvb-usb/gp8psk.c @@ -146,24 +146,24 @@ static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff) if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) if (! (status & bm8pskFW_Loaded)) /* BCM4500 firmware loaded */ if(gp8psk_load_bcm4500fw(d)) - return EINVAL; + return -EINVAL; if (! (status & bmIntersilOn)) /* LNB Power */ if (gp8psk_usb_in_op(d, START_INTERSIL, 1, 0, &buf, 1)) - return EINVAL; + return -EINVAL; /* Set DVB mode to 1 */ if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) if (gp8psk_usb_out_op(d, SET_DVB_MODE, 1, 0, NULL, 0)) - return EINVAL; + return -EINVAL; /* Abort possible TS (if previous tune crashed) */ if (gp8psk_usb_out_op(d, ARM_TRANSFER, 0, 0, NULL, 0)) - return EINVAL; + return -EINVAL; } else { /* Turn off LNB power */ if (gp8psk_usb_in_op(d, START_INTERSIL, 0, 0, &buf, 1)) - return EINVAL; + return -EINVAL; /* Turn off 8psk power */ if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1)) return -EINVAL; -- cgit v1.2.3 From 4d3437df25325d517ee310d55989ce9630ff529e Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Mon, 26 May 2008 14:03:02 -0300 Subject: V4L/DVB (7904): v4l/tuner-core: consistent handling of return values change check_mode and set_mode to return negative errors and fix all callers Signed-off-by: Marcin Slusarz Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tuner-core.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index a0f7bc1edaa..1a9117457c8 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -536,7 +536,7 @@ static void set_addr(struct i2c_client *c, struct tuner_setup *tun_setup) static inline int check_mode(struct tuner *t, char *cmd) { if ((1 << t->mode & t->mode_mask) == 0) { - return EINVAL; + return -EINVAL; } switch (t->mode) { @@ -730,11 +730,11 @@ static inline int set_mode(struct i2c_client *client, struct tuner *t, int mode, t->mode = mode; - if (check_mode(t, cmd) == EINVAL) { + if (check_mode(t, cmd) == -EINVAL) { t->mode = T_STANDBY; if (analog_ops->standby) analog_ops->standby(&t->fe); - return EINVAL; + return -EINVAL; } return 0; } @@ -776,13 +776,13 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) break; case AUDC_SET_RADIO: if (set_mode(client, t, V4L2_TUNER_RADIO, "AUDC_SET_RADIO") - == EINVAL) + == -EINVAL) return 0; if (t->radio_freq) set_freq(client, t->radio_freq); break; case TUNER_SET_STANDBY: - if (check_mode(t, "TUNER_SET_STANDBY") == EINVAL) + if (check_mode(t, "TUNER_SET_STANDBY") == -EINVAL) return 0; t->mode = T_STANDBY; if (analog_ops->standby) @@ -790,7 +790,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) break; #ifdef CONFIG_VIDEO_ALLOW_V4L1 case VIDIOCSAUDIO: - if (check_mode(t, "VIDIOCSAUDIO") == EINVAL) + if (check_mode(t, "VIDIOCSAUDIO") == -EINVAL) return 0; if (check_v4l2(t) == EINVAL) return 0; @@ -813,7 +813,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) if (check_v4l2(t) == EINVAL) return 0; - if (set_mode(client,t,V4L2_TUNER_ANALOG_TV, "VIDIOCSCHAN")==EINVAL) + if (set_mode(client,t,V4L2_TUNER_ANALOG_TV, "VIDIOCSCHAN")==-EINVAL) return 0; if (vc->norm < ARRAY_SIZE(map)) @@ -827,7 +827,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) { unsigned long *v = arg; - if (check_mode(t, "VIDIOCSFREQ") == EINVAL) + if (check_mode(t, "VIDIOCSFREQ") == -EINVAL) return 0; if (check_v4l2(t) == EINVAL) return 0; @@ -839,7 +839,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct video_tuner *vt = arg; - if (check_mode(t, "VIDIOCGTUNER") == EINVAL) + if (check_mode(t, "VIDIOCGTUNER") == -EINVAL) return 0; if (check_v4l2(t) == EINVAL) return 0; @@ -883,7 +883,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct video_audio *va = arg; - if (check_mode(t, "VIDIOCGAUDIO") == EINVAL) + if (check_mode(t, "VIDIOCGAUDIO") == -EINVAL) return 0; if (check_v4l2(t) == EINVAL) return 0; @@ -925,7 +925,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) v4l2_std_id *id = arg; if (set_mode (client, t, V4L2_TUNER_ANALOG_TV, "VIDIOC_S_STD") - == EINVAL) + == -EINVAL) return 0; switch_v4l2(); @@ -941,7 +941,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) struct v4l2_frequency *f = arg; if (set_mode (client, t, f->type, "VIDIOC_S_FREQUENCY") - == EINVAL) + == -EINVAL) return 0; switch_v4l2(); set_freq(client,f->frequency); @@ -952,7 +952,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct v4l2_frequency *f = arg; - if (check_mode(t, "VIDIOC_G_FREQUENCY") == EINVAL) + if (check_mode(t, "VIDIOC_G_FREQUENCY") == -EINVAL) return 0; switch_v4l2(); f->type = t->mode; @@ -973,7 +973,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct v4l2_tuner *tuner = arg; - if (check_mode(t, "VIDIOC_G_TUNER") == EINVAL) + if (check_mode(t, "VIDIOC_G_TUNER") == -EINVAL) return 0; switch_v4l2(); @@ -1020,7 +1020,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct v4l2_tuner *tuner = arg; - if (check_mode(t, "VIDIOC_S_TUNER") == EINVAL) + if (check_mode(t, "VIDIOC_S_TUNER") == -EINVAL) return 0; switch_v4l2(); -- cgit v1.2.3 From 427aad6fda607914945022e916827037d2d0db3d Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Sun, 11 May 2008 19:58:59 -0300 Subject: V4L/DVB (7905): check_v4l2 should return -EINVAL on error check_v4l2 always returns 0, so this change is an noop for now, but a comment says it will return something else in the future Signed-off-by: Marcin Slusarz Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tuner-core.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index 1a9117457c8..0d12ace6166 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -792,7 +792,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) case VIDIOCSAUDIO: if (check_mode(t, "VIDIOCSAUDIO") == -EINVAL) return 0; - if (check_v4l2(t) == EINVAL) + if (check_v4l2(t) == -EINVAL) return 0; /* Should be implemented, since bttv calls it */ @@ -810,7 +810,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) }; struct video_channel *vc = arg; - if (check_v4l2(t) == EINVAL) + if (check_v4l2(t) == -EINVAL) return 0; if (set_mode(client,t,V4L2_TUNER_ANALOG_TV, "VIDIOCSCHAN")==-EINVAL) @@ -829,7 +829,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) if (check_mode(t, "VIDIOCSFREQ") == -EINVAL) return 0; - if (check_v4l2(t) == EINVAL) + if (check_v4l2(t) == -EINVAL) return 0; set_freq(client, *v); @@ -841,7 +841,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) if (check_mode(t, "VIDIOCGTUNER") == -EINVAL) return 0; - if (check_v4l2(t) == EINVAL) + if (check_v4l2(t) == -EINVAL) return 0; if (V4L2_TUNER_RADIO == t->mode) { @@ -885,7 +885,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) if (check_mode(t, "VIDIOCGAUDIO") == -EINVAL) return 0; - if (check_v4l2(t) == EINVAL) + if (check_v4l2(t) == -EINVAL) return 0; if (V4L2_TUNER_RADIO == t->mode) { -- cgit v1.2.3 From 38db143e6feaa2dc649ed8bf69d1a12f7b9c0246 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Fri, 16 May 2008 00:15:53 -0300 Subject: V4L/DVB (7906): tuners/mxl5005s.c: don't define variables for enums It doesn't seem to be intended that "tuner_modu_type" and "MXL5005_ControlName" were global variables. Signed-off-by: Adrian Bunk Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/mxl5005s.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/common/tuners/mxl5005s.c b/drivers/media/common/tuners/mxl5005s.c index 5d05b5390f6..0dc2bef9f6a 100644 --- a/drivers/media/common/tuners/mxl5005s.c +++ b/drivers/media/common/tuners/mxl5005s.c @@ -101,7 +101,7 @@ enum { MXL_QAM, MXL_ANALOG_CABLE, MXL_ANALOG_OTA -} tuner_modu_type; +}; /* MXL5005 Tuner Register Struct */ struct TunerReg { @@ -194,7 +194,7 @@ enum { RFSYN_DIVM, /* 88 */ DN_BYPASS_AGC_I2C /* 89 */ #endif -} MXL5005_ControlName; +}; /* * The following context is source code provided by MaxLinear. -- cgit v1.2.3 From 45033bcf172d9965210b644f3769c9de94c33333 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 26 May 2008 14:23:49 -0300 Subject: V4L/DVB (7908): always enter drivers/media/video/ After commit 039d40019f3c5e26ea50ec5af4270189f63365e1 (V4L/DVB (7898): Fix VIDEO_MEDIA Kconfig logic) VIDEO_MEDIA is no longer usable in Makefile's for deciding which directories we enter, resulting in compile errors like the following with CONFIG_VIDEO_DEV=y, CONFIG_DVB_CORE=m: <-- snip --> ... MODPOST 187 modules ... make[2]: *** [__modpost] Error 1 <-- snip --> The easiest solution is to always enter video/ Signed-off-by: Adrian Bunk Acked-by: Ingo Molnar Signed-off-by: Mauro Carvalho Chehab --- drivers/media/Makefile | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/media/Makefile b/drivers/media/Makefile index cc11c4c0e7e..09a829d8a7e 100644 --- a/drivers/media/Makefile +++ b/drivers/media/Makefile @@ -2,12 +2,7 @@ # Makefile for the kernel multimedia device drivers. # -obj-y := common/ - -obj-$(CONFIG_VIDEO_MEDIA) += common/ - -# Since hybrid devices are here, should be compiled if DVB and/or V4L -obj-$(CONFIG_VIDEO_MEDIA) += video/ +obj-y += common/ video/ obj-$(CONFIG_VIDEO_DEV) += radio/ obj-$(CONFIG_DVB_CORE) += dvb/ -- cgit v1.2.3 From b4aba24186d66190b21ab64bf28f22ffc51a9c43 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 20 May 2008 08:02:33 -0300 Subject: V4L/DVB (7910): usb: input layer dependency fixes testing of the -tip tree found the following build failures on 2.6.26-rc3: drivers/built-in.o: In function `ttusb_dec_disconnect': ttusb_dec.c:(.text+0xa2c95): undefined reference to `input_unregister_device' drivers/built-in.o: In function `dvb_usb_read_remote_control': dvb-usb-remote.c:(.text+0xa6a94): undefined reference to `input_event' with this config: http://redhat.com/~mingo/misc/config-Tue_May_20_03_48_57_CEST_2008.bad these are due to the media/dvb/usb layer having dependencies on INPUT functionality, without having that spelled out in the Kconfig file. this patch makes that dependency explicit (for the drivers affected), which solves the build error. Signed-off-by: Ingo Molnar Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/Kconfig | 2 +- drivers/media/dvb/ttusb-dec/Kconfig | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index cf4584e48b6..f00a0eb4042 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -1,6 +1,6 @@ config DVB_USB tristate "Support for various USB DVB devices" - depends on DVB_CORE && USB && I2C + depends on DVB_CORE && USB && I2C && INPUT depends on HOTPLUG # due to FW_LOADER select FW_LOADER help diff --git a/drivers/media/dvb/ttusb-dec/Kconfig b/drivers/media/dvb/ttusb-dec/Kconfig index 0712899e39a..a23cc0aa17d 100644 --- a/drivers/media/dvb/ttusb-dec/Kconfig +++ b/drivers/media/dvb/ttusb-dec/Kconfig @@ -1,6 +1,6 @@ config DVB_TTUSB_DEC tristate "Technotrend/Hauppauge USB DEC devices" - depends on DVB_CORE && USB + depends on DVB_CORE && USB && INPUT depends on HOTPLUG # due to FW_LOADER select FW_LOADER select CRC32 -- cgit v1.2.3 From 2f1a1c7f9c10a87a6725e4b9603e4880c2059d71 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 25 May 2008 13:09:51 -0300 Subject: V4L/DVB (7916): dib7000p: fix dib7000p_attach when !CONFIG_DVB_DIB7000P somebody forgot to to fix this header... Thanks to Ingo Molnar for pointing this out. Tested-by: Ingo Molnar Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/dib7000p.h | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/dvb/frontends/dib7000p.h b/drivers/media/dvb/frontends/dib7000p.h index 081bd81f3da..07c4d12ed5b 100644 --- a/drivers/media/dvb/frontends/dib7000p.h +++ b/drivers/media/dvb/frontends/dib7000p.h @@ -37,7 +37,20 @@ struct dib7000p_config { #define DEFAULT_DIB7000P_I2C_ADDRESS 18 -extern struct dvb_frontend * dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000p_config *cfg); +#if defined(CONFIG_DVB_DIB7000P) || (defined(CONFIG_DVB_DIB7000P_MODULE) && defined(MODULE)) +extern struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap, + u8 i2c_addr, + struct dib7000p_config *cfg); +#else +static inline struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap, + u8 i2c_addr, + struct dib7000p_config *cfg) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + extern int dib7000p_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000p_config cfg[]); extern struct i2c_adapter * dib7000p_get_i2c_master(struct dvb_frontend *, enum dibx000_i2c_interface, int); -- cgit v1.2.3 From 383a211699026ee41d9726e3f5edcfa1b0071b8f Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sat, 24 May 2008 23:48:16 -0300 Subject: V4L/DVB (7918): au0828: remove irrelevent analog tuner standby code This code is irrelevant to this driver and should be removed. This was copied from a hack in cx88-dvb.c, which prevents noise coming from the analog tuner (via an audio patch cable from the pci card to the sound hardware) when in digital mode by muting the tda988x. This issue does not apply to this USB hybrid chip design, where a single piece of silicon handles both analog and digital demodulation. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/au0828/au0828-dvb.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/au0828/au0828-dvb.c b/drivers/media/video/au0828/au0828-dvb.c index c86a5f17eca..c6d47059038 100644 --- a/drivers/media/video/au0828/au0828-dvb.c +++ b/drivers/media/video/au0828/au0828-dvb.c @@ -353,12 +353,6 @@ int au0828_dvb_register(struct au0828_dev *dev) return -1; } - /* Put the analog decoder in standby to keep it quiet */ - au0828_call_i2c_clients(dev, TUNER_SET_STANDBY, NULL); - - if (dvb->frontend->ops.analog_ops.standby) - dvb->frontend->ops.analog_ops.standby(dvb->frontend); - /* register everything */ ret = dvb_register(dev); if (ret < 0) { -- cgit v1.2.3 From 5cf3f5cd1f6ee0d81b75c659c732dd8dd245a350 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sat, 24 May 2008 23:49:03 -0300 Subject: V4L/DVB (7919): VIDEO_AU0828 does not depend on VIDEO_DEV Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/au0828/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/video/au0828/Kconfig b/drivers/media/video/au0828/Kconfig index def10d08637..52b2491581a 100644 --- a/drivers/media/video/au0828/Kconfig +++ b/drivers/media/video/au0828/Kconfig @@ -1,7 +1,7 @@ config VIDEO_AU0828 tristate "Auvitek AU0828 support" - depends on VIDEO_DEV && I2C && INPUT && DVB_CORE && USB + depends on I2C && INPUT && DVB_CORE && USB select I2C_ALGOBIT select VIDEO_TVEEPROM select DVB_AU8522 if !DVB_FE_CUSTOMIZE -- cgit v1.2.3 From 3b4a9714f43a1d675a4352260a12daae197f37c3 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Mon, 26 May 2008 01:31:17 -0300 Subject: V4L/DVB (7922): tuner-simple: fix tuner_warn() induced kernel oops in simple_tuner_attach() The tuner_warn() macro relies on the local variable "priv" to be a valid pointer. There was a case in simple_tuner_attach() where this cannot be the case yet, so tuner_warn() would dereference a NULL "priv" pointer. Changed the tuner_warn() to a printk() with the originally intended output format. Signed-off-by: Andy Walls Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/tuner-simple.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/common/tuners/tuner-simple.c b/drivers/media/common/tuners/tuner-simple.c index be8d903171b..266c255cf0d 100644 --- a/drivers/media/common/tuners/tuner-simple.c +++ b/drivers/media/common/tuners/tuner-simple.c @@ -1018,8 +1018,10 @@ struct dvb_frontend *simple_tuner_attach(struct dvb_frontend *fe, fe->ops.i2c_gate_ctrl(fe, 1); if (1 != i2c_transfer(i2c_adap, &msg, 1)) - tuner_warn("unable to probe %s, proceeding anyway.", - tuners[type].name); + printk(KERN_WARNING "tuner-simple %d-%04x: " + "unable to probe %s, proceeding anyway.", + i2c_adapter_id(i2c_adap), i2c_addr, + tuners[type].name); if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); -- cgit v1.2.3 From 7f3917f6484938d56cb5ab660f476c1dfa445a81 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 19 May 2008 22:13:02 -0300 Subject: V4L/DVB (7925): cx18: ensure that the xceive pin is always asserted on init. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx18/cx18-gpio.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/cx18/cx18-gpio.c b/drivers/media/video/cx18/cx18-gpio.c index bb8bc86086d..1e0d32b992f 100644 --- a/drivers/media/video/cx18/cx18-gpio.c +++ b/drivers/media/video/cx18/cx18-gpio.c @@ -62,12 +62,14 @@ void cx18_gpio_init(struct cx18 *cx) gpio_dir = cx->card->gpio_init.direction; gpio_val = cx->card->gpio_init.initial_value; + if (cx->card->xceive_pin) { + gpio_dir |= 1 << cx->card->xceive_pin; + gpio_val |= 1 << cx->card->xceive_pin; + } + if (gpio_dir == 0) return; - gpio_dir |= 1 << cx->card->xceive_pin; - gpio_val |= 1 << cx->card->xceive_pin; - CX18_DEBUG_INFO("GPIO initial dir: %08x/%08x out: %08x/%08x\n", read_reg(CX18_REG_GPIO_DIR1), read_reg(CX18_REG_GPIO_DIR2), read_reg(CX18_REG_GPIO_OUT1), read_reg(CX18_REG_GPIO_OUT2)); -- cgit v1.2.3 From 63b8c709895febf62766dc8e818a1457a520fb15 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 21 May 2008 17:40:19 -0300 Subject: V4L/DVB (7928): cx18: fix audio registers 808 and 80c The handling of the audio registers 808 and 80c were based on old datasheets. Updated to the latest information. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx18/cx18-av-core.c | 81 ++++++++++++++++++--------------- 1 file changed, 45 insertions(+), 36 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/cx18/cx18-av-core.c b/drivers/media/video/cx18/cx18-av-core.c index 66864904c99..9a26751615c 100644 --- a/drivers/media/video/cx18/cx18-av-core.c +++ b/drivers/media/video/cx18/cx18-av-core.c @@ -182,14 +182,16 @@ static void input_change(struct cx18 *cx) if (std == V4L2_STD_NTSC_M_JP) { /* Japan uses EIAJ audio standard */ cx18_av_write(cx, 0x808, 0xf7); + cx18_av_write(cx, 0x80b, 0x02); } else if (std == V4L2_STD_NTSC_M_KR) { /* South Korea uses A2 audio standard */ cx18_av_write(cx, 0x808, 0xf8); + cx18_av_write(cx, 0x80b, 0x03); } else { /* Others use the BTSC audio standard */ cx18_av_write(cx, 0x808, 0xf6); + cx18_av_write(cx, 0x80b, 0x01); } - cx18_av_write(cx, 0x80b, 0x00); } else if (std & V4L2_STD_PAL) { /* Follow tuner change procedure for PAL */ cx18_av_write(cx, 0x808, 0xff); @@ -741,8 +743,8 @@ static void log_audio_status(struct cx18 *cx) { struct cx18_av_state *state = &cx->av_state; u8 download_ctl = cx18_av_read(cx, 0x803); - u8 mod_det_stat0 = cx18_av_read(cx, 0x805); - u8 mod_det_stat1 = cx18_av_read(cx, 0x804); + u8 mod_det_stat0 = cx18_av_read(cx, 0x804); + u8 mod_det_stat1 = cx18_av_read(cx, 0x805); u8 audio_config = cx18_av_read(cx, 0x808); u8 pref_mode = cx18_av_read(cx, 0x809); u8 afc0 = cx18_av_read(cx, 0x80b); @@ -760,12 +762,12 @@ static void log_audio_status(struct cx18 *cx) case 0x12: p = "dual with SAP"; break; case 0x14: p = "tri with SAP"; break; case 0xfe: p = "forced mode"; break; - default: p = "not defined"; + default: p = "not defined"; break; } CX18_INFO("Detected audio mode: %s\n", p); switch (mod_det_stat1) { - case 0x00: p = "BTSC"; break; + case 0x00: p = "not defined"; break; case 0x01: p = "EIAJ"; break; case 0x02: p = "A2-M"; break; case 0x03: p = "A2-BG"; break; @@ -779,8 +781,13 @@ static void log_audio_status(struct cx18 *cx) case 0x0b: p = "NICAM-I"; break; case 0x0c: p = "NICAM-L"; break; case 0x0d: p = "BTSC/EIAJ/A2-M Mono (4.5 MHz FMMono)"; break; + case 0x0e: p = "IF FM Radio"; break; + case 0x0f: p = "BTSC"; break; + case 0x10: p = "detected chrominance"; break; + case 0xfd: p = "unknown audio standard"; break; + case 0xfe: p = "forced audio standard"; break; case 0xff: p = "no detected audio standard"; break; - default: p = "not defined"; + default: p = "not defined"; break; } CX18_INFO("Detected audio standard: %s\n", p); CX18_INFO("Audio muted: %s\n", @@ -789,22 +796,23 @@ static void log_audio_status(struct cx18 *cx) (download_ctl & 0x10) ? "running" : "stopped"); switch (audio_config >> 4) { - case 0x00: p = "BTSC"; break; - case 0x01: p = "EIAJ"; break; - case 0x02: p = "A2-M"; break; - case 0x03: p = "A2-BG"; break; - case 0x04: p = "A2-DK1"; break; - case 0x05: p = "A2-DK2"; break; - case 0x06: p = "A2-DK3"; break; - case 0x07: p = "A1 (6.0 MHz FM Mono)"; break; - case 0x08: p = "AM-L"; break; - case 0x09: p = "NICAM-BG"; break; - case 0x0a: p = "NICAM-DK"; break; - case 0x0b: p = "NICAM-I"; break; - case 0x0c: p = "NICAM-L"; break; - case 0x0d: p = "FM radio"; break; + case 0x00: p = "undefined"; break; + case 0x01: p = "BTSC"; break; + case 0x02: p = "EIAJ"; break; + case 0x03: p = "A2-M"; break; + case 0x04: p = "A2-BG"; break; + case 0x05: p = "A2-DK1"; break; + case 0x06: p = "A2-DK2"; break; + case 0x07: p = "A2-DK3"; break; + case 0x08: p = "A1 (6.0 MHz FM Mono)"; break; + case 0x09: p = "AM-L"; break; + case 0x0a: p = "NICAM-BG"; break; + case 0x0b: p = "NICAM-DK"; break; + case 0x0c: p = "NICAM-I"; break; + case 0x0d: p = "NICAM-L"; break; + case 0x0e: p = "FM radio"; break; case 0x0f: p = "automatic detection"; break; - default: p = "undefined"; + default: p = "undefined"; break; } CX18_INFO("Configured audio standard: %s\n", p); @@ -815,12 +823,9 @@ static void log_audio_status(struct cx18 *cx) case 0x02: p = "MONO3 (STEREO forced MONO)"; break; case 0x03: p = "MONO4 (NICAM ANALOG-Language C/Analog Fallback)"; break; case 0x04: p = "STEREO"; break; - case 0x05: p = "DUAL1 (AB)"; break; - case 0x06: p = "DUAL2 (AC) (FM)"; break; - case 0x07: p = "DUAL3 (BC) (FM)"; break; - case 0x08: p = "DUAL4 (AC) (AM)"; break; - case 0x09: p = "DUAL5 (BC) (AM)"; break; - case 0x0a: p = "SAP"; break; + case 0x05: p = "DUAL1 (AC)"; break; + case 0x06: p = "DUAL2 (BC)"; break; + case 0x07: p = "DUAL3 (AB)"; break; default: p = "undefined"; } CX18_INFO("Configured audio mode: %s\n", p); @@ -835,9 +840,11 @@ static void log_audio_status(struct cx18 *cx) case 0x06: p = "BTSC"; break; case 0x07: p = "EIAJ"; break; case 0x08: p = "A2-M"; break; - case 0x09: p = "FM Radio"; break; + case 0x09: p = "FM Radio (4.5 MHz)"; break; + case 0x0a: p = "FM Radio (5.5 MHz)"; break; + case 0x0b: p = "S-Video"; break; case 0x0f: p = "automatic standard and mode detection"; break; - default: p = "undefined"; + default: p = "undefined"; break; } CX18_INFO("Configured audio system: %s\n", p); } @@ -857,22 +864,24 @@ static void log_audio_status(struct cx18 *cx) case 5: p = "language AC"; break; case 6: p = "language BC"; break; case 7: p = "language AB"; break; - default: p = "undefined"; + default: p = "undefined"; break; } CX18_INFO("Preferred audio mode: %s\n", p); if ((audio_config & 0xf) == 0xf) { - switch ((afc0 >> 2) & 0x1) { + switch ((afc0 >> 3) & 0x1) { case 0: p = "system DK"; break; case 1: p = "system L"; break; } CX18_INFO("Selected 65 MHz format: %s\n", p); - switch (afc0 & 0x3) { - case 0: p = "BTSC"; break; - case 1: p = "EIAJ"; break; - case 2: p = "A2-M"; break; - default: p = "undefined"; + switch (afc0 & 0x7) { + case 0: p = "Chroma"; break; + case 1: p = "BTSC"; break; + case 2: p = "EIAJ"; break; + case 3: p = "A2-M"; break; + case 4: p = "autodetect"; break; + default: p = "undefined"; break; } CX18_INFO("Selected 45 MHz format: %s\n", p); } -- cgit v1.2.3 From be303e16dbd210077c697aaf2f0960413166b53d Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 24 May 2008 12:43:43 -0300 Subject: V4L/DVB (7930): ivtv: bump version to 1.3.0. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/ivtv-version.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/ivtv/ivtv-version.h b/drivers/media/video/ivtv/ivtv-version.h index 02c5ab071d1..442f43f11b7 100644 --- a/drivers/media/video/ivtv/ivtv-version.h +++ b/drivers/media/video/ivtv/ivtv-version.h @@ -22,8 +22,8 @@ #define IVTV_DRIVER_NAME "ivtv" #define IVTV_DRIVER_VERSION_MAJOR 1 -#define IVTV_DRIVER_VERSION_MINOR 2 -#define IVTV_DRIVER_VERSION_PATCHLEVEL 1 +#define IVTV_DRIVER_VERSION_MINOR 3 +#define IVTV_DRIVER_VERSION_PATCHLEVEL 0 #define IVTV_VERSION __stringify(IVTV_DRIVER_VERSION_MAJOR) "." __stringify(IVTV_DRIVER_VERSION_MINOR) "." __stringify(IVTV_DRIVER_VERSION_PATCHLEVEL) #define IVTV_DRIVER_VERSION KERNEL_VERSION(IVTV_DRIVER_VERSION_MAJOR,IVTV_DRIVER_VERSION_MINOR,IVTV_DRIVER_VERSION_PATCHLEVEL) -- cgit v1.2.3 From 31554ae599a8ff6854bf8ecbedc1946c64854388 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 25 May 2008 11:21:27 -0300 Subject: V4L/DVB (7931): cx18: allow for simultaneous digital and analog capture The HVR-1600 can do both analog and digital capture at the same time. Due to a driver bug -EBUSY would be returned when attempting to setup an analog capture while a digital capture was already in progress. Separate the two internally. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx18/cx18-controls.c | 6 +++--- drivers/media/video/cx18/cx18-driver.c | 2 +- drivers/media/video/cx18/cx18-driver.h | 3 ++- drivers/media/video/cx18/cx18-fileops.c | 10 +++++----- drivers/media/video/cx18/cx18-ioctl.c | 12 ++++++------ drivers/media/video/cx18/cx18-streams.c | 16 ++++++++++------ 6 files changed, 27 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/cx18/cx18-controls.c b/drivers/media/video/cx18/cx18-controls.c index 2bdac5ebbb0..87cf4102166 100644 --- a/drivers/media/video/cx18/cx18-controls.c +++ b/drivers/media/video/cx18/cx18-controls.c @@ -159,7 +159,7 @@ static int cx18_setup_vbi_fmt(struct cx18 *cx, enum v4l2_mpeg_stream_vbi_fmt fmt { if (!(cx->v4l2_cap & V4L2_CAP_SLICED_VBI_CAPTURE)) return -EINVAL; - if (atomic_read(&cx->capturing) > 0) + if (atomic_read(&cx->ana_capturing) > 0) return -EBUSY; /* First try to allocate sliced VBI buffers if needed. */ @@ -235,7 +235,7 @@ int cx18_control_ioctls(struct cx18 *cx, unsigned int cmd, void *arg) CX18_DEBUG_IOCTL("VIDIOC_S_EXT_CTRLS\n"); if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG) { struct cx2341x_mpeg_params p = cx->params; - int err = cx2341x_ext_ctrls(&p, atomic_read(&cx->capturing), arg, cmd); + int err = cx2341x_ext_ctrls(&p, atomic_read(&cx->ana_capturing), arg, cmd); if (err) return err; @@ -295,7 +295,7 @@ int cx18_control_ioctls(struct cx18 *cx, unsigned int cmd, void *arg) CX18_DEBUG_IOCTL("VIDIOC_TRY_EXT_CTRLS\n"); if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG) return cx2341x_ext_ctrls(&cx->params, - atomic_read(&cx->capturing), arg, cmd); + atomic_read(&cx->ana_capturing), arg, cmd); return -EINVAL; } diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index 0dd4e052997..472f88e6419 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -889,7 +889,7 @@ static void cx18_remove(struct pci_dev *pci_dev) /* Stop all captures */ CX18_DEBUG_INFO("Stopping all streams\n"); - if (atomic_read(&cx->capturing) > 0) + if (atomic_read(&cx->tot_capturing) > 0) cx18_stop_all_captures(cx); /* Interrupts */ diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index a2a6c58d12f..9c6a53477a1 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -380,7 +380,8 @@ struct cx18 { int stream_buf_size[CX18_MAX_STREAMS]; /* Stream buffer size */ struct cx18_stream streams[CX18_MAX_STREAMS]; /* Stream data */ unsigned long i_flags; /* global cx18 flags */ - atomic_t capturing; /* count number of active capture streams */ + atomic_t ana_capturing; /* count number of active analog capture streams */ + atomic_t tot_capturing; /* total count number of active capture streams */ spinlock_t lock; /* lock access to this struct */ int search_pack_header; diff --git a/drivers/media/video/cx18/cx18-fileops.c b/drivers/media/video/cx18/cx18-fileops.c index 0b3141db174..d0d7888f269 100644 --- a/drivers/media/video/cx18/cx18-fileops.c +++ b/drivers/media/video/cx18/cx18-fileops.c @@ -318,7 +318,7 @@ static ssize_t cx18_read(struct cx18_stream *s, char __user *ubuf, size_t tot_written = 0; int single_frame = 0; - if (atomic_read(&cx->capturing) == 0 && s->id == -1) { + if (atomic_read(&cx->ana_capturing) == 0 && s->id == -1) { /* shouldn't happen */ CX18_DEBUG_WARN("Stream %s not initialized before read\n", s->name); @@ -581,7 +581,7 @@ int cx18_v4l2_close(struct inode *inode, struct file *filp) cx18_call_i2c_clients(cx, VIDIOC_S_STD, &cx->std); /* Select correct audio input (i.e. TV tuner or Line in) */ cx18_audio_set_io(cx); - if (atomic_read(&cx->capturing) > 0) { + if (atomic_read(&cx->ana_capturing) > 0) { /* Undo video mute */ cx18_vapi(cx, CX18_CPU_SET_VIDEO_MUTE, 2, s->handle, cx->params.video_mute | @@ -627,7 +627,7 @@ static int cx18_serialized_open(struct cx18_stream *s, struct file *filp) } if (!test_bit(CX18_F_I_RADIO_USER, &cx->i_flags)) { - if (atomic_read(&cx->capturing) > 0) { + if (atomic_read(&cx->ana_capturing) > 0) { /* switching to radio while capture is in progress is not polite */ cx18_release_stream(s); @@ -694,7 +694,7 @@ int cx18_v4l2_open(struct inode *inode, struct file *filp) void cx18_mute(struct cx18 *cx) { - if (atomic_read(&cx->capturing)) + if (atomic_read(&cx->ana_capturing)) cx18_vapi(cx, CX18_CPU_SET_AUDIO_MUTE, 2, cx18_find_handle(cx), 1); CX18_DEBUG_INFO("Mute\n"); @@ -702,7 +702,7 @@ void cx18_mute(struct cx18 *cx) void cx18_unmute(struct cx18 *cx) { - if (atomic_read(&cx->capturing)) { + if (atomic_read(&cx->ana_capturing)) { cx18_msleep_timeout(100, 0); cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 2, cx18_find_handle(cx), 12); diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c index dbdcb86ec5a..4151f1e5493 100644 --- a/drivers/media/video/cx18/cx18-ioctl.c +++ b/drivers/media/video/cx18/cx18-ioctl.c @@ -247,7 +247,7 @@ static int cx18_try_or_set_fmt(struct cx18 *cx, int streamtype, if (!set_fmt || (cx->params.width == w && cx->params.height == h)) return 0; - if (atomic_read(&cx->capturing) > 0) + if (atomic_read(&cx->ana_capturing) > 0) return -EBUSY; cx->params.width = w; @@ -264,7 +264,7 @@ static int cx18_try_or_set_fmt(struct cx18 *cx, int streamtype, if (fmt->type == V4L2_BUF_TYPE_VBI_CAPTURE) { if (set_fmt && streamtype == CX18_ENC_STREAM_TYPE_VBI && cx->vbi.sliced_in->service_set && - atomic_read(&cx->capturing) > 0) + atomic_read(&cx->ana_capturing) > 0) return -EBUSY; if (set_fmt) { cx->vbi.sliced_in->service_set = 0; @@ -293,7 +293,7 @@ static int cx18_try_or_set_fmt(struct cx18 *cx, int streamtype, return 0; if (set == 0) return -EINVAL; - if (atomic_read(&cx->capturing) > 0 && cx->vbi.sliced_in->service_set == 0) + if (atomic_read(&cx->ana_capturing) > 0 && cx->vbi.sliced_in->service_set == 0) return -EBUSY; cx18_av_cmd(cx, VIDIOC_S_FMT, fmt); memcpy(cx->vbi.sliced_in, vbifmt, sizeof(*cx->vbi.sliced_in)); @@ -581,7 +581,7 @@ int cx18_v4l2_ioctls(struct cx18 *cx, struct file *filp, unsigned cmd, void *arg break; if (test_bit(CX18_F_I_RADIO_USER, &cx->i_flags) || - atomic_read(&cx->capturing) > 0) { + atomic_read(&cx->ana_capturing) > 0) { /* Switching standard would turn off the radio or mess with already running streams, prevent that by returning EBUSY. */ @@ -677,7 +677,7 @@ int cx18_v4l2_ioctls(struct cx18 *cx, struct file *filp, unsigned cmd, void *arg enc->flags = 0; if (try) return 0; - if (!atomic_read(&cx->capturing)) + if (!atomic_read(&cx->ana_capturing)) return -EPERM; if (test_and_set_bit(CX18_F_I_ENC_PAUSED, &cx->i_flags)) return 0; @@ -689,7 +689,7 @@ int cx18_v4l2_ioctls(struct cx18 *cx, struct file *filp, unsigned cmd, void *arg enc->flags = 0; if (try) return 0; - if (!atomic_read(&cx->capturing)) + if (!atomic_read(&cx->ana_capturing)) return -EPERM; if (!test_and_clear_bit(CX18_F_I_ENC_PAUSED, &cx->i_flags)) return 0; diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c index dee6cc98809..5a065869401 100644 --- a/drivers/media/video/cx18/cx18-streams.c +++ b/drivers/media/video/cx18/cx18-streams.c @@ -444,7 +444,7 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) s->handle = data[0]; cx18_vapi(cx, CX18_CPU_SET_CHANNEL_TYPE, 2, s->handle, captype); - if (atomic_read(&cx->capturing) == 0 && !ts) { + if (atomic_read(&cx->ana_capturing) == 0 && !ts) { /* Stuff from Windows, we don't know what it is */ cx18_vapi(cx, CX18_CPU_SET_VER_CROP_LINE, 2, s->handle, 0); cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 3, s->handle, 3, 1); @@ -467,7 +467,7 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) cx2341x_update(cx, cx18_api_func, NULL, &cx->params); } - if (atomic_read(&cx->capturing) == 0) { + if (atomic_read(&cx->tot_capturing) == 0) { clear_bit(CX18_F_I_EOS, &cx->i_flags); write_reg(7, CX18_DSP0_INTERRUPT_MASK); } @@ -493,7 +493,9 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) } /* you're live! sit back and await interrupts :) */ - atomic_inc(&cx->capturing); + if (!ts) + atomic_inc(&cx->ana_capturing); + atomic_inc(&cx->tot_capturing); return 0; } @@ -524,7 +526,7 @@ int cx18_stop_v4l2_encode_stream(struct cx18_stream *s, int gop_end) CX18_DEBUG_INFO("Stop Capture\n"); - if (atomic_read(&cx->capturing) == 0) + if (atomic_read(&cx->tot_capturing) == 0) return 0; if (s->type == CX18_ENC_STREAM_TYPE_MPG) @@ -538,7 +540,9 @@ int cx18_stop_v4l2_encode_stream(struct cx18_stream *s, int gop_end) CX18_INFO("ignoring gop_end: not (yet?) supported by the firmware\n"); } - atomic_dec(&cx->capturing); + if (s->type != CX18_ENC_STREAM_TYPE_TS) + atomic_dec(&cx->ana_capturing); + atomic_dec(&cx->tot_capturing); /* Clear capture and no-read bits */ clear_bit(CX18_F_S_STREAMING, &s->s_flags); @@ -546,7 +550,7 @@ int cx18_stop_v4l2_encode_stream(struct cx18_stream *s, int gop_end) cx18_vapi(cx, CX18_DESTROY_TASK, 1, s->handle); s->handle = 0xffffffff; - if (atomic_read(&cx->capturing) > 0) + if (atomic_read(&cx->tot_capturing) > 0) return 0; write_reg(5, CX18_DSP0_INTERRUPT_MASK); -- cgit v1.2.3 From 8f9935732930e705cab1936a03418ce01aee979a Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 25 May 2008 11:45:53 -0300 Subject: V4L/DVB (7932): cx18: mark Compro H900 as fully supported. I always assumed that the Compro H900 could do digital as well, but it turned out that it is an analog-only card. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx18/cx18-cards.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c index 553adbf2cd4..baccd079243 100644 --- a/drivers/media/video/cx18/cx18-cards.c +++ b/drivers/media/video/cx18/cx18-cards.c @@ -126,7 +126,7 @@ static const struct cx18_card cx18_card_hvr1600_samsung = { /* ------------------------------------------------------------------------- */ -/* Compro VideoMate H900: not working at the moment! */ +/* Compro VideoMate H900: note that this card is analog only! */ static const struct cx18_card_pci_info cx18_pci_h900[] = { { PCI_DEVICE_ID_CX23418, CX18_PCI_ID_COMPRO, 0xe100 }, @@ -136,7 +136,7 @@ static const struct cx18_card_pci_info cx18_pci_h900[] = { static const struct cx18_card cx18_card_h900 = { .type = CX18_CARD_COMPRO_H900, .name = "Compro VideoMate H900", - .comment = "DVB & VBI are not yet supported\n", + .comment = "VBI is not yet supported\n", .v4l2_capabilities = CX18_CAP_ENCODER, .hw_audio_ctrl = CX18_HW_CX23418, .hw_all = CX18_HW_TUNER, -- cgit v1.2.3 From ba60bc673ce7d019ae6684cebbb33e5239346664 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 25 May 2008 14:34:36 -0300 Subject: V4L/DVB (7934): cx18: move gpio_dir/val statics to the cx18 struct. The gpio_dir/val statics cannot be global, they are card-specific. Thanks to Andy Walls for pointing this out. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx18/cx18-driver.h | 4 ++++ drivers/media/video/cx18/cx18-gpio.c | 29 ++++++++++++++--------------- 2 files changed, 18 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index 9c6a53477a1..b943aeac276 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -424,6 +424,10 @@ struct cx18 { struct mutex i2c_bus_lock[2]; struct i2c_client *i2c_clients[I2C_CLIENTS_MAX]; + /* gpio */ + u32 gpio_dir; + u32 gpio_val; + /* v4l2 and User settings */ /* codec settings */ diff --git a/drivers/media/video/cx18/cx18-gpio.c b/drivers/media/video/cx18/cx18-gpio.c index 1e0d32b992f..2f324b8467c 100644 --- a/drivers/media/video/cx18/cx18-gpio.c +++ b/drivers/media/video/cx18/cx18-gpio.c @@ -35,9 +35,6 @@ #define CX18_REG_GPIO_OUT2 0xc78104 #define CX18_REG_GPIO_DIR2 0xc7810c -static u32 gpio_dir; -static u32 gpio_val; - /* * HVR-1600 GPIO pins, courtesy of Hauppauge: * @@ -49,25 +46,28 @@ static u32 gpio_val; static void gpio_write(struct cx18 *cx) { - write_reg((gpio_dir & 0xffff) << 16, CX18_REG_GPIO_DIR1); - write_reg(((gpio_dir & 0xffff) << 16) | (gpio_val & 0xffff), + u32 dir = cx->gpio_dir; + u32 val = cx->gpio_val; + + write_reg((dir & 0xffff) << 16, CX18_REG_GPIO_DIR1); + write_reg(((dir & 0xffff) << 16) | (val & 0xffff), CX18_REG_GPIO_OUT1); - write_reg(gpio_dir & 0xffff0000, CX18_REG_GPIO_DIR2); - write_reg((gpio_dir & 0xffff0000) | ((gpio_val & 0xffff0000) >> 16), + write_reg(dir & 0xffff0000, CX18_REG_GPIO_DIR2); + write_reg((dir & 0xffff0000) | ((val & 0xffff0000) >> 16), CX18_REG_GPIO_OUT2); } void cx18_gpio_init(struct cx18 *cx) { - gpio_dir = cx->card->gpio_init.direction; - gpio_val = cx->card->gpio_init.initial_value; + cx->gpio_dir = cx->card->gpio_init.direction; + cx->gpio_val = cx->card->gpio_init.initial_value; if (cx->card->xceive_pin) { - gpio_dir |= 1 << cx->card->xceive_pin; - gpio_val |= 1 << cx->card->xceive_pin; + cx->gpio_dir |= 1 << cx->card->xceive_pin; + cx->gpio_val |= 1 << cx->card->xceive_pin; } - if (gpio_dir == 0) + if (cx->gpio_dir == 0) return; CX18_DEBUG_INFO("GPIO initial dir: %08x/%08x out: %08x/%08x\n", @@ -88,13 +88,12 @@ int cx18_reset_tuner_gpio(void *dev, int cmd, int value) return 0; CX18_DEBUG_INFO("Resetting tuner\n"); - gpio_dir |= 1 << cx->card->xceive_pin; - gpio_val &= ~(1 << cx->card->xceive_pin); + cx->gpio_val &= ~(1 << cx->card->xceive_pin); gpio_write(cx); schedule_timeout_interruptible(msecs_to_jiffies(1)); - gpio_val |= 1 << cx->card->xceive_pin; + cx->gpio_val |= 1 << cx->card->xceive_pin; gpio_write(cx); schedule_timeout_interruptible(msecs_to_jiffies(1)); return 0; -- cgit v1.2.3 From 9adea1c00df74823e1719ebbcb86c972c4c2aba1 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Fri, 18 Apr 2008 20:26:04 -0300 Subject: V4L/DVB (7943): tuner: add macro, hybrid_tuner_report_instance_count Create a macro to report the number of instances of the tuner driver currently in use. This will allow drivers to perform specific cleanups before destroying the last instance of a tuner. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/tuner-i2c.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/media/common/tuners/tuner-i2c.h b/drivers/media/common/tuners/tuner-i2c.h index 3ad6c8e0b04..cb1c7141f0c 100644 --- a/drivers/media/common/tuners/tuner-i2c.h +++ b/drivers/media/common/tuners/tuner-i2c.h @@ -170,4 +170,12 @@ __fail: \ __ret; \ }) +#define hybrid_tuner_report_instance_count(state) \ +({ \ + int __ret = 0; \ + if (state) \ + __ret = state->i2c_props.count; \ + __ret; \ +}) + #endif /* __TUNER_I2C_H__ */ -- cgit v1.2.3 From c663d03590a882f4834197bff278ca0aa2a95e2e Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Fri, 18 Apr 2008 21:22:50 -0300 Subject: V4L/DVB (7944): tuner-xc2028: use hybrid_tuner_request_state Use a standard method to manage multiple instances of a hybrid tuner. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/tuner-xc2028.c | 87 ++++++++++++++---------------- 1 file changed, 41 insertions(+), 46 deletions(-) (limited to 'drivers') diff --git a/drivers/media/common/tuners/tuner-xc2028.c b/drivers/media/common/tuners/tuner-xc2028.c index 9e9003cffc7..0cbde17bfbb 100644 --- a/drivers/media/common/tuners/tuner-xc2028.c +++ b/drivers/media/common/tuners/tuner-xc2028.c @@ -46,7 +46,7 @@ module_param_string(firmware_name, firmware_name, sizeof(firmware_name), 0); MODULE_PARM_DESC(firmware_name, "Firmware file name. Allows overriding the " "default firmware name\n"); -static LIST_HEAD(xc2028_list); +static LIST_HEAD(hybrid_tuner_instance_list); static DEFINE_MUTEX(xc2028_list_mutex); /* struct for storing firmware table */ @@ -68,12 +68,11 @@ struct firmware_properties { }; struct xc2028_data { - struct list_head xc2028_list; + struct list_head hybrid_tuner_instance_list; struct tuner_i2c_props i2c_props; int (*tuner_callback) (void *dev, int command, int arg); void *video_dev; - int count; __u32 frequency; struct firmware_description *firm; @@ -1072,20 +1071,19 @@ static int xc2028_dvb_release(struct dvb_frontend *fe) mutex_lock(&xc2028_list_mutex); - priv->count--; - - if (!priv->count) { - list_del(&priv->xc2028_list); - + /* only perform final cleanup if this is the last instance */ + if (hybrid_tuner_report_instance_count(priv) == 1) { kfree(priv->ctrl.fname); - free_firmware(priv); - kfree(priv); - fe->tuner_priv = NULL; } + if (priv) + hybrid_tuner_release_state(priv); + mutex_unlock(&xc2028_list_mutex); + fe->tuner_priv = NULL; + return 0; } @@ -1150,7 +1148,7 @@ struct dvb_frontend *xc2028_attach(struct dvb_frontend *fe, struct xc2028_config *cfg) { struct xc2028_data *priv; - void *video_dev; + int instance; if (debug) printk(KERN_DEBUG "xc2028: Xcv2028/3028 init called!\n"); @@ -1163,48 +1161,40 @@ struct dvb_frontend *xc2028_attach(struct dvb_frontend *fe, return NULL; } - video_dev = cfg->i2c_adap->algo_data; - - if (debug) - printk(KERN_DEBUG "xc2028: video_dev =%p\n", video_dev); - mutex_lock(&xc2028_list_mutex); - list_for_each_entry(priv, &xc2028_list, xc2028_list) { - if (&priv->i2c_props.adap->dev == &cfg->i2c_adap->dev) { - video_dev = NULL; - if (debug) - printk(KERN_DEBUG "xc2028: reusing device\n"); - - break; - } - } - - if (video_dev) { - priv = kzalloc(sizeof(*priv), GFP_KERNEL); - if (priv == NULL) { - mutex_unlock(&xc2028_list_mutex); - return NULL; - } - - priv->i2c_props.addr = cfg->i2c_addr; - priv->i2c_props.adap = cfg->i2c_adap; - priv->i2c_props.name = "xc2028"; - - priv->video_dev = video_dev; + instance = hybrid_tuner_request_state(struct xc2028_data, priv, + hybrid_tuner_instance_list, + cfg->i2c_adap, cfg->i2c_addr, + "xc2028"); + switch (instance) { + case 0: + /* memory allocation failure */ + goto fail; + break; + case 1: + /* new tuner instance */ priv->tuner_callback = cfg->callback; priv->ctrl.max_len = 13; mutex_init(&priv->lock); - list_add_tail(&priv->xc2028_list, &xc2028_list); - } - - fe->tuner_priv = priv; - priv->count++; + /* analog side (tuner-core) uses i2c_adap->algo_data. + * digital side is not guaranteed to have algo_data defined. + * + * digital side will always have fe->dvb defined. + * analog side (tuner-core) doesn't (yet) define fe->dvb. + */ + priv->video_dev = ((fe->dvb) && (fe->dvb->priv)) ? + fe->dvb->priv : cfg->i2c_adap->algo_data; - if (debug) - printk(KERN_DEBUG "xc2028: usage count is %i\n", priv->count); + fe->tuner_priv = priv; + break; + case 2: + /* existing tuner instance */ + fe->tuner_priv = priv; + break; + } memcpy(&fe->ops.tuner_ops, &xc2028_dvb_tuner_ops, sizeof(xc2028_dvb_tuner_ops)); @@ -1217,6 +1207,11 @@ struct dvb_frontend *xc2028_attach(struct dvb_frontend *fe, mutex_unlock(&xc2028_list_mutex); return fe; +fail: + mutex_unlock(&xc2028_list_mutex); + + xc2028_dvb_release(fe); + return NULL; } EXPORT_SYMBOL(xc2028_attach); -- cgit v1.2.3 From f34ec12a17984d7df784bf49caf64f5f743e5e10 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:30:31 -0300 Subject: V4L/DVB (7956): cinergyT2: endianness annotations, endianness and race fixes Endianness annotations and fixes + fixing the handling of ->uncorrected_block_count Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/cinergyT2/cinergyT2.c | 46 +++++++++++++++++---------------- 1 file changed, 24 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c index f5010e8671b..a824f3719f8 100644 --- a/drivers/media/dvb/cinergyT2/cinergyT2.c +++ b/drivers/media/dvb/cinergyT2/cinergyT2.c @@ -82,22 +82,22 @@ enum cinergyt2_ep1_cmd { struct dvbt_set_parameters_msg { uint8_t cmd; - uint32_t freq; + __le32 freq; uint8_t bandwidth; - uint16_t tps; + __le16 tps; uint8_t flags; } __attribute__((packed)); struct dvbt_get_status_msg { - uint32_t freq; + __le32 freq; uint8_t bandwidth; - uint16_t tps; + __le16 tps; uint8_t flags; - uint16_t gain; + __le16 gain; uint8_t snr; - uint32_t viterbi_error_rate; - uint32_t rs_error_rate; - uint32_t uncorrected_block_count; + __le32 viterbi_error_rate; + __le32 rs_error_rate; + __le32 uncorrected_block_count; uint8_t lock_bits; uint8_t prev_lock_bits; } __attribute__((packed)); @@ -136,6 +136,7 @@ struct cinergyt2 { wait_queue_head_t poll_wq; int pending_fe_events; int disconnect_pending; + unsigned int uncorrected_block_count; atomic_t inuse; void *streambuf; @@ -147,7 +148,7 @@ struct cinergyt2 { char phys[64]; struct delayed_work rc_query_work; int rc_input_event; - u32 rc_last_code; + __le32 rc_last_code; unsigned long last_event_jiffies; #endif }; @@ -160,7 +161,7 @@ enum { struct cinergyt2_rc_event { char type; - uint32_t value; + __le32 value; } __attribute__((packed)); static const uint32_t rc_keys[] = { @@ -619,8 +620,11 @@ static int cinergyt2_ioctl (struct inode *inode, struct file *file, { uint32_t unc_count; - unc_count = stat->uncorrected_block_count; - stat->uncorrected_block_count = 0; + if (mutex_lock_interruptible(&cinergyt2->sem)) + return -ERESTARTSYS; + unc_count = cinergyt2->uncorrected_block_count; + cinergyt2->uncorrected_block_count = 0; + mutex_unlock(&cinergyt2->sem); /* UNC are already converted to host byte order... */ return put_user(unc_count,(__u32 __user *) arg); @@ -769,7 +773,7 @@ static void cinergyt2_query_rc (struct work_struct *work) input_sync(cinergyt2->rc_input_dev); cinergyt2->rc_input_event = KEY_MAX; } - cinergyt2->rc_last_code = ~0; + cinergyt2->rc_last_code = cpu_to_le32(~0); } goto out; } @@ -780,7 +784,7 @@ static void cinergyt2_query_rc (struct work_struct *work) n, le32_to_cpu(rc_events[n].value), rc_events[n].type); if (rc_events[n].type == CINERGYT2_RC_EVENT_TYPE_NEC && - rc_events[n].value == ~0) { + rc_events[n].value == cpu_to_le32(~0)) { /* keyrepeat bit -> just repeat last rc_input_event */ } else { cinergyt2->rc_input_event = KEY_MAX; @@ -795,7 +799,7 @@ static void cinergyt2_query_rc (struct work_struct *work) if (cinergyt2->rc_input_event != KEY_MAX) { if (rc_events[n].value == cinergyt2->rc_last_code && - cinergyt2->rc_last_code != ~0) { + cinergyt2->rc_last_code != cpu_to_le32(~0)) { /* emit a key-up so the double event is recognized */ dprintk(1, "rc_input_event=%d UP\n", cinergyt2->rc_input_event); input_report_key(cinergyt2->rc_input_dev, @@ -829,7 +833,7 @@ static int cinergyt2_register_rc(struct cinergyt2 *cinergyt2) usb_make_path(cinergyt2->udev, cinergyt2->phys, sizeof(cinergyt2->phys)); strlcat(cinergyt2->phys, "/input0", sizeof(cinergyt2->phys)); cinergyt2->rc_input_event = KEY_MAX; - cinergyt2->rc_last_code = ~0; + cinergyt2->rc_last_code = cpu_to_le32(~0); INIT_DELAYED_WORK(&cinergyt2->rc_query_work, cinergyt2_query_rc); input_dev->name = DRIVER_NAME " remote control"; @@ -840,8 +844,8 @@ static int cinergyt2_register_rc(struct cinergyt2 *cinergyt2) input_dev->keycodesize = 0; input_dev->keycodemax = 0; input_dev->id.bustype = BUS_USB; - input_dev->id.vendor = cinergyt2->udev->descriptor.idVendor; - input_dev->id.product = cinergyt2->udev->descriptor.idProduct; + input_dev->id.vendor = le16_to_cpu(cinergyt2->udev->descriptor.idVendor); + input_dev->id.product = le16_to_cpu(cinergyt2->udev->descriptor.idProduct); input_dev->id.version = 1; input_dev->dev.parent = &cinergyt2->udev->dev; @@ -889,18 +893,16 @@ static void cinergyt2_query (struct work_struct *work) char cmd [] = { CINERGYT2_EP1_GET_TUNER_STATUS }; struct dvbt_get_status_msg *s = &cinergyt2->status; uint8_t lock_bits; - uint32_t unc; if (cinergyt2->disconnect_pending || mutex_lock_interruptible(&cinergyt2->sem)) return; - unc = s->uncorrected_block_count; lock_bits = s->lock_bits; cinergyt2_command(cinergyt2, cmd, sizeof(cmd), (char *) s, sizeof(*s)); - unc += le32_to_cpu(s->uncorrected_block_count); - s->uncorrected_block_count = unc; + cinergyt2->uncorrected_block_count += + le32_to_cpu(s->uncorrected_block_count); if (lock_bits != s->lock_bits) { wake_up_interruptible(&cinergyt2->poll_wq); -- cgit v1.2.3 From a230e55d92347e09d9ba2e97096df114b2dfaf2d Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:30:41 -0300 Subject: V4L/DVB (7957): fix the roothole in av7110_av.c direct dereferencing from user-supplied address Signed-off-by: Al Viro Reviewed-by: Oliver Endriss Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/ttpci/av7110_av.c | 34 +++++++++++++++++++++++++++------- 1 file changed, 27 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/ttpci/av7110_av.c b/drivers/media/dvb/ttpci/av7110_av.c index 3e6b650fbb8..ec55a968f20 100644 --- a/drivers/media/dvb/ttpci/av7110_av.c +++ b/drivers/media/dvb/ttpci/av7110_av.c @@ -965,8 +965,9 @@ static u8 iframe_header[] = { 0x00, 0x00, 0x01, 0xe0, 0x00, 0x00, 0x80, 0x00, 0x static int play_iframe(struct av7110 *av7110, char __user *buf, unsigned int len, int nonblock) { - int i, n; + unsigned i, n; int progressive = 0; + int match = 0; dprintk(2, "av7110:%p, \n", av7110); @@ -975,12 +976,31 @@ static int play_iframe(struct av7110 *av7110, char __user *buf, unsigned int len return -EBUSY; } - for (i = 0; i < len - 5; i++) { - /* get progressive flag from picture extension */ - if (buf[i] == 0x00 && buf[i+1] == 0x00 && - buf[i+2] == 0x01 && (unsigned char)buf[i+3] == 0xb5 && - (buf[i+4] & 0xf0) == 0x10) - progressive = buf[i+5] & 0x08; + /* search in buf for instances of 00 00 01 b5 1? */ + for (i = 0; i < len; i++) { + unsigned char c; + if (get_user(c, buf + i)) + return -EFAULT; + if (match == 5) { + progressive = c & 0x08; + match = 0; + } + if (c == 0x00) { + match = (match == 1 || match == 2) ? 2 : 1; + continue; + } + switch (match++) { + case 2: if (c == 0x01) + continue; + break; + case 3: if (c == 0xb5) + continue; + break; + case 4: if ((c & 0xf0) == 0x10) + continue; + break; + } + match = 0; } /* setting n always > 1, fixes problems when playing stillframes -- cgit v1.2.3 From 3e085629bc921c37c1bb2e2fb6227fa14de14682 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:30:51 -0300 Subject: V4L/DVB (7958): fix unaligned access in av7110.c Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/ttpci/av7110.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c index 747e7f1a626..f05d43d8b5c 100644 --- a/drivers/media/dvb/ttpci/av7110.c +++ b/drivers/media/dvb/ttpci/av7110.c @@ -51,6 +51,7 @@ #include #include #include +#include #include @@ -1461,9 +1462,9 @@ static int check_firmware(struct av7110* av7110) ptr += 4; /* check dpram file */ - crc = ntohl(*(u32*) ptr); + crc = get_unaligned_be32(ptr); ptr += 4; - len = ntohl(*(u32*) ptr); + len = get_unaligned_be32(ptr); ptr += 4; if (len >= 512) { printk("dvb-ttpci: dpram file is way too big.\n"); @@ -1478,9 +1479,9 @@ static int check_firmware(struct av7110* av7110) ptr += len; /* check root file */ - crc = ntohl(*(u32*) ptr); + crc = get_unaligned_be32(ptr); ptr += 4; - len = ntohl(*(u32*) ptr); + len = get_unaligned_be32(ptr); ptr += 4; if (len <= 200000 || len >= 300000 || -- cgit v1.2.3 From b05ce2e79ebaf205b2d66ac32f10e2bd231d80a4 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:31:01 -0300 Subject: V4L/DVB (7959): endianness fix in flexcop-usb.c Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/b2c2/flexcop-usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/dvb/b2c2/flexcop-usb.c b/drivers/media/dvb/b2c2/flexcop-usb.c index 449fb5c3d0b..ae0d76a5d51 100644 --- a/drivers/media/dvb/b2c2/flexcop-usb.c +++ b/drivers/media/dvb/b2c2/flexcop-usb.c @@ -379,7 +379,7 @@ static void flexcop_usb_transfer_exit(struct flexcop_usb *fc_usb) static int flexcop_usb_transfer_init(struct flexcop_usb *fc_usb) { - u16 frame_size = fc_usb->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize; + u16 frame_size = le16_to_cpu(fc_usb->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize); int bufsize = B2C2_USB_NUM_ISO_URB * B2C2_USB_FRAMES_PER_ISO * frame_size,i,j,ret; int buffer_offset = 0; -- cgit v1.2.3 From 12fbcef1055ee7dd522d578c4c6c0e80acaa3d4c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:31:11 -0300 Subject: V4L/DVB (7960): net: endianness annotations Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-core/dvb_net.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c index 56d871cfd7f..c2334aef414 100644 --- a/drivers/media/dvb/dvb-core/dvb_net.c +++ b/drivers/media/dvb/dvb-core/dvb_net.c @@ -168,7 +168,7 @@ struct dvb_net_priv { * stolen from eth.c out of the linux kernel, hacked for dvb-device * by Michael Holzt */ -static unsigned short dvb_net_eth_type_trans(struct sk_buff *skb, +static __be16 dvb_net_eth_type_trans(struct sk_buff *skb, struct net_device *dev) { struct ethhdr *eth; @@ -277,10 +277,10 @@ static int handle_one_ule_extension( struct dvb_net_priv *p ) if(ext_len >= 0) { p->ule_next_hdr += ext_len; if (!p->ule_bridged) { - p->ule_sndu_type = ntohs(*(unsigned short *)p->ule_next_hdr); + p->ule_sndu_type = ntohs(*(__be16 *)p->ule_next_hdr); p->ule_next_hdr += 2; } else { - p->ule_sndu_type = ntohs(*(unsigned short *)(p->ule_next_hdr + ((p->ule_dbit ? 2 : 3) * ETH_ALEN))); + p->ule_sndu_type = ntohs(*(__be16 *)(p->ule_next_hdr + ((p->ule_dbit ? 2 : 3) * ETH_ALEN))); /* This assures the extension handling loop will terminate. */ } } @@ -294,7 +294,7 @@ static int handle_one_ule_extension( struct dvb_net_priv *p ) if (ule_optional_ext_handlers[htype]) (void)ule_optional_ext_handlers[htype]( p ); p->ule_next_hdr += ext_len; - p->ule_sndu_type = ntohs( *(unsigned short *)(p->ule_next_hdr-2) ); + p->ule_sndu_type = ntohs( *(__be16 *)(p->ule_next_hdr-2) ); /* * note: the length of the next header type is included in the * length of THIS optional extension header @@ -594,8 +594,8 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len ) /* Check for complete payload. */ if (priv->ule_sndu_remain <= 0) { /* Check CRC32, we've got it in our skb already. */ - unsigned short ulen = htons(priv->ule_sndu_len); - unsigned short utype = htons(priv->ule_sndu_type); + __be16 ulen = htons(priv->ule_sndu_len); + __be16 utype = htons(priv->ule_sndu_type); const u8 *tail; struct kvec iov[3] = { { &ulen, sizeof ulen }, -- cgit v1.2.3 From da5ee48677b96dbf44c2ae46857dea060af34164 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:31:21 -0300 Subject: V4L/DVB (7961): fix endianness bug in dib0700_devices.c Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/dib0700_devices.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 346223856f5..c4d40fe01d5 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -111,8 +111,8 @@ static int bristol_tuner_attach(struct dvb_usb_adapter *adap) struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe, 1); s8 a; int if1=1220; - if (adap->dev->udev->descriptor.idVendor == USB_VID_HAUPPAUGE && - adap->dev->udev->descriptor.idProduct == USB_PID_HAUPPAUGE_NOVA_T_500_2) { + if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) && + adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_500_2)) { if (!eeprom_read(prim_i2c,0x59 + adap->id,&a)) if1=1220+a; } return dvb_attach(mt2060_attach,adap->fe, tun_i2c,&bristol_mt2060_config[adap->id], @@ -402,8 +402,8 @@ static int stk7700ph_frontend_attach(struct dvb_usb_adapter *adap) { struct usb_device_descriptor *desc = &adap->dev->udev->descriptor; - if (desc->idVendor == USB_VID_PINNACLE && - desc->idProduct == USB_PID_PINNACLE_EXPRESSCARD_320CX) + if (desc->idVendor == cpu_to_le16(USB_VID_PINNACLE) && + desc->idProduct == cpu_to_le16(USB_PID_PINNACLE_EXPRESSCARD_320CX)) dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); else dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); @@ -845,8 +845,8 @@ static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap) struct i2c_adapter *tun_i2c; s8 a; int if1=1220; - if (adap->dev->udev->descriptor.idVendor == USB_VID_HAUPPAUGE && - adap->dev->udev->descriptor.idProduct == USB_PID_HAUPPAUGE_NOVA_T_STICK) { + if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) && + adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_STICK)) { if (!eeprom_read(prim_i2c,0x58,&a)) if1=1220+a; } if (st->is_dib7000pc) @@ -990,11 +990,12 @@ static struct dib7000p_config dib7070p_dib7000p_config = { /* STK7070P */ static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap) { - if (adap->dev->udev->descriptor.idVendor == USB_VID_PINNACLE && - adap->dev->udev->descriptor.idProduct == USB_PID_PINNACLE_PCTV72E) - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); + struct usb_device_descriptor *p = &adap->dev->udev->descriptor; + if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) && + p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E)) + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); else - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10); dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); -- cgit v1.2.3 From d4f979a9e1c5c8ed291e89ec38248823c9a182ba Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:31:31 -0300 Subject: V4L/DVB (7962): ttusb endianness annotations and fixes Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c | 2 +- drivers/media/dvb/ttusb-dec/ttusb_dec.c | 25 ++++++++++++----------- drivers/media/dvb/ttusb-dec/ttusbdecfe.c | 10 ++++----- 3 files changed, 19 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c index 732ce4de512..5d2d81ab237 100644 --- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c +++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c @@ -552,7 +552,7 @@ static void ttusb_process_muxpack(struct ttusb *ttusb, const u8 * muxpack, u16 csum = 0, cc; int i; for (i = 0; i < len; i += 2) - csum ^= le16_to_cpup((u16 *) (muxpack + i)); + csum ^= le16_to_cpup((__le16 *) (muxpack + i)); if (csum) { printk("%s: muxpack with incorrect checksum, ignoring\n", __func__); diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c index 42eee04daa5..fefdc05e84a 100644 --- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c +++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c @@ -343,7 +343,7 @@ static int ttusb_dec_get_stb_state (struct ttusb_dec *dec, unsigned int *mode, u8 c[COMMAND_PACKET_SIZE]; int c_length; int result; - unsigned int tmp; + __be32 tmp; dprintk("%s\n", __func__); @@ -398,9 +398,9 @@ static void ttusb_dec_set_pids(struct ttusb_dec *dec) 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; - u16 pcr = htons(dec->pid[DMX_PES_PCR]); - u16 audio = htons(dec->pid[DMX_PES_AUDIO]); - u16 video = htons(dec->pid[DMX_PES_VIDEO]); + __be16 pcr = htons(dec->pid[DMX_PES_PCR]); + __be16 audio = htons(dec->pid[DMX_PES_AUDIO]); + __be16 video = htons(dec->pid[DMX_PES_VIDEO]); dprintk("%s\n", __func__); @@ -435,7 +435,7 @@ static void ttusb_dec_process_pva(struct ttusb_dec *dec, u8 *pva, int length) case 0x01: { /* VideoStream */ int prebytes = pva[5] & 0x03; int postbytes = (pva[5] & 0x0c) >> 2; - u16 v_pes_payload_length; + __be16 v_pes_payload_length; if (output_pva) { dec->video_filter->feed->cb.ts(pva, length, NULL, 0, @@ -1006,7 +1006,7 @@ static int ttusb_dec_start_sec_feed(struct dvb_demux_feed *dvbdmxfeed) 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; - u16 pid; + __be16 pid; u8 c[COMMAND_PACKET_SIZE]; int c_length; int result; @@ -1278,9 +1278,10 @@ static int ttusb_dec_boot_dsp(struct ttusb_dec *dec) u8 *firmware = NULL; size_t firmware_size = 0; u16 firmware_csum = 0; - u16 firmware_csum_ns; - u32 firmware_size_nl; - u32 crc32_csum, crc32_check, tmp; + __be16 firmware_csum_ns; + __be32 firmware_size_nl; + u32 crc32_csum, crc32_check; + __be32 tmp; const struct firmware *fw_entry = NULL; dprintk("%s\n", __func__); @@ -1306,7 +1307,7 @@ static int ttusb_dec_boot_dsp(struct ttusb_dec *dec) valid. */ crc32_csum = crc32(~0L, firmware, 56) ^ ~0L; memcpy(&tmp, &firmware[56], 4); - crc32_check = htonl(tmp); + crc32_check = ntohl(tmp); if (crc32_csum != crc32_check) { printk("%s: crc32 check of DSP code failed (calculated " "0x%08x != 0x%08x in file), file invalid.\n", @@ -1627,7 +1628,7 @@ static int ttusb_dec_probe(struct usb_interface *intf, usb_set_intfdata(intf, (void *)dec); - switch (le16_to_cpu(id->idProduct)) { + switch (id->idProduct) { case 0x1006: ttusb_dec_set_model(dec, TTUSB_DEC3000S); break; @@ -1652,7 +1653,7 @@ static int ttusb_dec_probe(struct usb_interface *intf, ttusb_dec_init_dvb(dec); dec->adapter.priv = dec; - switch (le16_to_cpu(id->idProduct)) { + switch (id->idProduct) { case 0x1006: dec->fe = ttusbdecfe_dvbs_attach(&fe_config); break; diff --git a/drivers/media/dvb/ttusb-dec/ttusbdecfe.c b/drivers/media/dvb/ttusb-dec/ttusbdecfe.c index eb5eaeccd7c..443af24097f 100644 --- a/drivers/media/dvb/ttusb-dec/ttusbdecfe.c +++ b/drivers/media/dvb/ttusb-dec/ttusbdecfe.c @@ -86,7 +86,7 @@ static int ttusbdecfe_dvbt_set_frontend(struct dvb_frontend* fe, struct dvb_fron 0x00, 0x00, 0x00, 0xff, 0x00, 0x00, 0x00, 0xff }; - u32 freq = htonl(p->frequency / 1000); + __be32 freq = htonl(p->frequency / 1000); memcpy(&b[4], &freq, sizeof (u32)); state->config->send_command(fe, 0x71, sizeof(b), b, NULL, NULL); @@ -117,10 +117,10 @@ static int ttusbdecfe_dvbs_set_frontend(struct dvb_frontend* fe, struct dvb_fron 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; - u32 freq; - u32 sym_rate; - u32 band; - u32 lnb_voltage; + __be32 freq; + __be32 sym_rate; + __be32 band; + __be32 lnb_voltage; freq = htonl(p->frequency + (state->hi_band ? LOF_HI : LOF_LO)); -- cgit v1.2.3 From b0510f8dc73dce56f35337487c6374ae84b15446 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:31:41 -0300 Subject: V4L/DVB (7963): ivtv: trivial annotations Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/ivtv-driver.h | 10 ++++++++-- drivers/media/video/ivtv/ivtv-fileops.c | 2 +- drivers/media/video/ivtv/ivtv-irq.c | 8 ++++---- drivers/media/video/ivtv/ivtv-queue.c | 2 +- drivers/media/video/ivtv/ivtv-yuv.c | 2 +- drivers/media/video/ivtv/ivtv-yuv.h | 2 +- 6 files changed, 16 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h index ba06e813c58..9d23b1efd36 100644 --- a/drivers/media/video/ivtv/ivtv-driver.h +++ b/drivers/media/video/ivtv/ivtv-driver.h @@ -259,6 +259,12 @@ struct ivtv_mailbox_data { /* Scatter-Gather array element, used in DMA transfers */ struct ivtv_sg_element { + __le32 src; + __le32 dst; + __le32 size; +}; + +struct ivtv_sg_host_element { u32 src; u32 dst; u32 size; @@ -349,8 +355,8 @@ struct ivtv_stream { u16 dma_xfer_cnt; /* Base Dev SG Array for cx23415/6 */ - struct ivtv_sg_element *sg_pending; - struct ivtv_sg_element *sg_processing; + struct ivtv_sg_host_element *sg_pending; + struct ivtv_sg_host_element *sg_processing; struct ivtv_sg_element *sg_dma; dma_addr_t sg_handle; int sg_pending_size; diff --git a/drivers/media/video/ivtv/ivtv-fileops.c b/drivers/media/video/ivtv/ivtv-fileops.c index f2fa434b677..db813e071ce 100644 --- a/drivers/media/video/ivtv/ivtv-fileops.c +++ b/drivers/media/video/ivtv/ivtv-fileops.c @@ -587,7 +587,7 @@ retry: since we may get here before the stream has been fully set-up */ if (mode == OUT_YUV && s->q_full.length == 0 && itv->dma_data_req_size) { while (count >= itv->dma_data_req_size) { - if (!ivtv_yuv_udma_stream_frame (itv, (void *)user_buf)) { + if (!ivtv_yuv_udma_stream_frame (itv, (void __user *)user_buf)) { bytes_written += itv->dma_data_req_size; user_buf += itv->dma_data_req_size; count -= itv->dma_data_req_size; diff --git a/drivers/media/video/ivtv/ivtv-irq.c b/drivers/media/video/ivtv/ivtv-irq.c index d8ba3a4a876..fba150a6cd2 100644 --- a/drivers/media/video/ivtv/ivtv-irq.c +++ b/drivers/media/video/ivtv/ivtv-irq.c @@ -231,14 +231,14 @@ static void dma_post(struct ivtv_stream *s) struct ivtv_buffer *buf = NULL; struct list_head *p; u32 offset; - u32 *u32buf; + __le32 *u32buf; int x = 0; IVTV_DEBUG_HI_DMA("%s %s completed (%x)\n", ivtv_use_pio(s) ? "PIO" : "DMA", s->name, s->dma_offset); list_for_each(p, &s->q_dma.list) { buf = list_entry(p, struct ivtv_buffer, list); - u32buf = (u32 *)buf->buf; + u32buf = (__le32 *)buf->buf; /* Sync Buffer */ ivtv_buf_sync_for_cpu(s, buf); @@ -444,7 +444,7 @@ static void ivtv_dma_enc_start(struct ivtv_stream *s) } s->dma_xfer_cnt++; - memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_element) * s->sg_pending_size); + memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_host_element) * s->sg_pending_size); s->sg_processing_size = s->sg_pending_size; s->sg_pending_size = 0; s->sg_processed = 0; @@ -473,7 +473,7 @@ static void ivtv_dma_dec_start(struct ivtv_stream *s) if (s->q_predma.bytesused) ivtv_queue_move(s, &s->q_predma, NULL, &s->q_dma, s->q_predma.bytesused); s->dma_xfer_cnt++; - memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_element) * s->sg_pending_size); + memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_host_element) * s->sg_pending_size); s->sg_processing_size = s->sg_pending_size; s->sg_pending_size = 0; s->sg_processed = 0; diff --git a/drivers/media/video/ivtv/ivtv-queue.c b/drivers/media/video/ivtv/ivtv-queue.c index fc8b1eaa333..71bd13e22e2 100644 --- a/drivers/media/video/ivtv/ivtv-queue.c +++ b/drivers/media/video/ivtv/ivtv-queue.c @@ -193,7 +193,7 @@ void ivtv_flush_queues(struct ivtv_stream *s) int ivtv_stream_alloc(struct ivtv_stream *s) { struct ivtv *itv = s->itv; - int SGsize = sizeof(struct ivtv_sg_element) * s->buffers; + int SGsize = sizeof(struct ivtv_sg_host_element) * s->buffers; int i; if (s->buffers == 0) diff --git a/drivers/media/video/ivtv/ivtv-yuv.c b/drivers/media/video/ivtv/ivtv-yuv.c index a9417f6e408..3092ff1d00a 100644 --- a/drivers/media/video/ivtv/ivtv-yuv.c +++ b/drivers/media/video/ivtv/ivtv-yuv.c @@ -1116,7 +1116,7 @@ void ivtv_yuv_setup_stream_frame(struct ivtv *itv) } /* Attempt to dma a frame from a user buffer */ -int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void *src) +int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void __user *src) { struct yuv_playback_info *yi = &itv->yuv_info; struct ivtv_dma_frame dma_args; diff --git a/drivers/media/video/ivtv/ivtv-yuv.h b/drivers/media/video/ivtv/ivtv-yuv.h index 2fe5f125076..ca5173fbf00 100644 --- a/drivers/media/video/ivtv/ivtv-yuv.h +++ b/drivers/media/video/ivtv/ivtv-yuv.h @@ -35,7 +35,7 @@ extern const u32 yuv_offset[IVTV_YUV_BUFFERS]; int ivtv_yuv_filter_check(struct ivtv *itv); void ivtv_yuv_setup_stream_frame(struct ivtv *itv); -int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void *src); +int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void __user *src); void ivtv_yuv_frame_complete(struct ivtv *itv); int ivtv_yuv_prep_frame(struct ivtv *itv, struct ivtv_dma_frame *args); void ivtv_yuv_close(struct ivtv *itv); -- cgit v1.2.3 From 990c81c8afcd71eced2482ad59950ea755eddc7f Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:32:01 -0300 Subject: V4L/DVB (7964): cx18 iomem annotations Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx18/cx18-driver.c | 2 +- drivers/media/video/cx18/cx18-driver.h | 2 +- drivers/media/video/cx18/cx18-fileops.c | 3 ++- drivers/media/video/cx18/cx18-irq.c | 2 +- drivers/media/video/cx18/cx18-mailbox.c | 8 ++++---- drivers/media/video/cx18/cx18-streams.c | 8 ++++---- 6 files changed, 13 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index 472f88e6419..4f5d23127fc 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -670,7 +670,7 @@ static int __devinit cx18_probe(struct pci_dev *dev, cx18_init_power(cx, 1); cx18_init_memory(cx); - cx->scb = (struct cx18_scb *)(cx->enc_mem + SCB_OFFSET); + cx->scb = (struct cx18_scb __iomem *)(cx->enc_mem + SCB_OFFSET); cx18_init_scb(cx); cx18_gpio_init(cx); diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index b943aeac276..de14ab59a20 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -358,7 +358,7 @@ struct cx18 { u32 v4l2_cap; /* V4L2 capabilities of card */ u32 hw_flags; /* Hardware description of the board */ unsigned mdl_offset; - struct cx18_scb *scb; /* pointer to SCB */ + struct cx18_scb __iomem *scb; /* pointer to SCB */ struct cx18_av_state av_state; diff --git a/drivers/media/video/cx18/cx18-fileops.c b/drivers/media/video/cx18/cx18-fileops.c index d0d7888f269..1e537fe04a2 100644 --- a/drivers/media/video/cx18/cx18-fileops.c +++ b/drivers/media/video/cx18/cx18-fileops.c @@ -361,7 +361,8 @@ static ssize_t cx18_read(struct cx18_stream *s, char __user *ubuf, cx18_enqueue(s, buf, &s->q_free); cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle, - (void *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem, + (void __iomem *)&cx->scb->cpu_mdl[buf->id] - + cx->enc_mem, 1, buf->id, s->buf_size); } else cx18_enqueue(s, buf, &s->q_io); diff --git a/drivers/media/video/cx18/cx18-irq.c b/drivers/media/video/cx18/cx18-irq.c index 6e14f8bda55..0590d715210 100644 --- a/drivers/media/video/cx18/cx18-irq.c +++ b/drivers/media/video/cx18/cx18-irq.c @@ -75,7 +75,7 @@ static void epu_dma_done(struct cx18 *cx, struct cx18_mailbox *mb) cx18_buf_sync_for_device(s, buf); cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle, - (void *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem, + (void __iomem *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem, 1, buf->id, s->buf_size); } else set_bit(CX18_F_B_NEED_BUF_SWAP, &buf->b_flags); diff --git a/drivers/media/video/cx18/cx18-mailbox.c b/drivers/media/video/cx18/cx18-mailbox.c index 0c5f328bca5..2a5ccef9185 100644 --- a/drivers/media/video/cx18/cx18-mailbox.c +++ b/drivers/media/video/cx18/cx18-mailbox.c @@ -94,10 +94,10 @@ static const struct cx18_api_info *find_api_info(u32 cmd) return NULL; } -static struct cx18_mailbox *cx18_mb_is_complete(struct cx18 *cx, int rpu, +static struct cx18_mailbox __iomem *cx18_mb_is_complete(struct cx18 *cx, int rpu, u32 *state, u32 *irq, u32 *req) { - struct cx18_mailbox *mb = NULL; + struct cx18_mailbox __iomem *mb = NULL; int wait_count = 0; u32 ack; @@ -142,7 +142,7 @@ static struct cx18_mailbox *cx18_mb_is_complete(struct cx18 *cx, int rpu, long cx18_mb_ack(struct cx18 *cx, const struct cx18_mailbox *mb) { const struct cx18_api_info *info = find_api_info(mb->cmd); - struct cx18_mailbox *ack_mb; + struct cx18_mailbox __iomem *ack_mb; u32 ack_irq; u8 rpu = CPU; @@ -182,7 +182,7 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[]) { const struct cx18_api_info *info = find_api_info(cmd); u32 state = 0, irq = 0, req, oldreq, err; - struct cx18_mailbox *mb; + struct cx18_mailbox __iomem *mb; wait_queue_head_t *waitq; int timeout = 100; int cnt = 0; diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c index 5a065869401..1b921a33609 100644 --- a/drivers/media/video/cx18/cx18-streams.c +++ b/drivers/media/video/cx18/cx18-streams.c @@ -473,8 +473,8 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) } cx18_vapi(cx, CX18_CPU_DE_SET_MDL_ACK, 3, s->handle, - (void *)&cx->scb->cpu_mdl_ack[s->type][0] - cx->enc_mem, - (void *)&cx->scb->cpu_mdl_ack[s->type][1] - cx->enc_mem); + (void __iomem *)&cx->scb->cpu_mdl_ack[s->type][0] - cx->enc_mem, + (void __iomem *)&cx->scb->cpu_mdl_ack[s->type][1] - cx->enc_mem); list_for_each(p, &s->q_free.list) { struct cx18_buffer *buf = list_entry(p, struct cx18_buffer, list); @@ -482,8 +482,8 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) writel(buf->dma_handle, &cx->scb->cpu_mdl[buf->id].paddr); writel(s->buf_size, &cx->scb->cpu_mdl[buf->id].length); cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle, - (void *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem, 1, - buf->id, s->buf_size); + (void __iomem *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem, + 1, buf->id, s->buf_size); } /* begin_capture */ if (cx18_vapi(cx, CX18_CPU_CAPTURE_START, 1, s->handle)) { -- cgit v1.2.3 From d8eaa58b06e8779453410d88d2d86e700a0432c6 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:31:51 -0300 Subject: V4L/DVB (7965): annotate bcx_riscmem Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/bt8xx/bttv-risc.c | 8 +++++--- drivers/media/video/btcx-risc.c | 2 +- drivers/media/video/btcx-risc.h | 4 ++-- drivers/media/video/cx23885/cx23885-core.c | 8 ++++---- drivers/media/video/cx88/cx88-core.c | 8 ++++---- 5 files changed, 16 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/bt8xx/bttv-risc.c b/drivers/media/video/bt8xx/bttv-risc.c index e5979f77504..0af586876e7 100644 --- a/drivers/media/video/bt8xx/bttv-risc.c +++ b/drivers/media/video/bt8xx/bttv-risc.c @@ -48,7 +48,7 @@ bttv_risc_packed(struct bttv *btv, struct btcx_riscmem *risc, { u32 instructions,line,todo; struct scatterlist *sg; - u32 *rp; + __le32 *rp; int rc; /* estimate risc mem: worst case is one write per page border + @@ -128,7 +128,8 @@ bttv_risc_planar(struct bttv *btv, struct btcx_riscmem *risc, unsigned int cpadding) { unsigned int instructions,line,todo,ylen,chroma; - u32 *rp,ri; + __le32 *rp; + u32 ri; struct scatterlist *ysg; struct scatterlist *usg; struct scatterlist *vsg; @@ -244,7 +245,8 @@ bttv_risc_overlay(struct bttv *btv, struct btcx_riscmem *risc, { int dwords,rc,line,maxy,start,end,skip,nskips; struct btcx_skiplist *skips; - u32 *rp,ri,ra; + __le32 *rp; + u32 ri,ra; u32 addr; /* skip list for window clipping */ diff --git a/drivers/media/video/btcx-risc.c b/drivers/media/video/btcx-risc.c index ce0840ccd59..f42701f82e7 100644 --- a/drivers/media/video/btcx-risc.c +++ b/drivers/media/video/btcx-risc.c @@ -63,7 +63,7 @@ int btcx_riscmem_alloc(struct pci_dev *pci, struct btcx_riscmem *risc, unsigned int size) { - u32 *cpu; + __le32 *cpu; dma_addr_t dma; if (NULL != risc->cpu && risc->size < size) diff --git a/drivers/media/video/btcx-risc.h b/drivers/media/video/btcx-risc.h index 503e6c6d7b6..861bc811282 100644 --- a/drivers/media/video/btcx-risc.h +++ b/drivers/media/video/btcx-risc.h @@ -2,8 +2,8 @@ */ struct btcx_riscmem { unsigned int size; - u32 *cpu; - u32 *jmp; + __le32 *cpu; + __le32 *jmp; dma_addr_t dma; }; diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c index f24abcd06de..c4cc2f3b887 100644 --- a/drivers/media/video/cx23885/cx23885-core.c +++ b/drivers/media/video/cx23885/cx23885-core.c @@ -823,7 +823,7 @@ static void cx23885_dev_unregister(struct cx23885_dev *dev) iounmap(dev->lmmio); } -static u32* cx23885_risc_field(u32 *rp, struct scatterlist *sglist, +static __le32* cx23885_risc_field(__le32 *rp, struct scatterlist *sglist, unsigned int offset, u32 sync_line, unsigned int bpl, unsigned int padding, unsigned int lines) @@ -883,7 +883,7 @@ int cx23885_risc_buffer(struct pci_dev *pci, struct btcx_riscmem *risc, unsigned int padding, unsigned int lines) { u32 instructions, fields; - u32 *rp; + __le32 *rp; int rc; fields = 0; @@ -924,7 +924,7 @@ static int cx23885_risc_databuffer(struct pci_dev *pci, unsigned int lines) { u32 instructions; - u32 *rp; + __le32 *rp; int rc; /* estimate risc mem: worst case is one write per page border + @@ -951,7 +951,7 @@ static int cx23885_risc_databuffer(struct pci_dev *pci, int cx23885_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc, u32 reg, u32 mask, u32 value) { - u32 *rp; + __le32 *rp; int rc; if ((rc = btcx_riscmem_alloc(pci, risc, 4*16)) < 0) diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c index c4d1aff1fdb..60eeda3057e 100644 --- a/drivers/media/video/cx88/cx88-core.c +++ b/drivers/media/video/cx88/cx88-core.c @@ -70,7 +70,7 @@ static DEFINE_MUTEX(devlist); /* @lpi: lines per IRQ, or 0 to not generate irqs. Note: IRQ to be generated _after_ lpi lines are transferred. */ -static u32* cx88_risc_field(u32 *rp, struct scatterlist *sglist, +static __le32* cx88_risc_field(__le32 *rp, struct scatterlist *sglist, unsigned int offset, u32 sync_line, unsigned int bpl, unsigned int padding, unsigned int lines, unsigned int lpi) @@ -130,7 +130,7 @@ int cx88_risc_buffer(struct pci_dev *pci, struct btcx_riscmem *risc, unsigned int bpl, unsigned int padding, unsigned int lines) { u32 instructions,fields; - u32 *rp; + __le32 *rp; int rc; fields = 0; @@ -168,7 +168,7 @@ int cx88_risc_databuffer(struct pci_dev *pci, struct btcx_riscmem *risc, unsigned int lines, unsigned int lpi) { u32 instructions; - u32 *rp; + __le32 *rp; int rc; /* estimate risc mem: worst case is one write per page border + @@ -193,7 +193,7 @@ int cx88_risc_databuffer(struct pci_dev *pci, struct btcx_riscmem *risc, int cx88_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc, u32 reg, u32 mask, u32 value) { - u32 *rp; + __le32 *rp; int rc; if ((rc = btcx_riscmem_alloc(pci, risc, 4*16)) < 0) -- cgit v1.2.3 From 576904bb8941d2ae958a097888cee418d5192144 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:32:11 -0300 Subject: V4L/DVB (7966): cx18: direct dereferencing of iomem Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx18/cx18-irq.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/cx18/cx18-irq.c b/drivers/media/video/cx18/cx18-irq.c index 0590d715210..25114a5cbd5 100644 --- a/drivers/media/video/cx18/cx18-irq.c +++ b/drivers/media/video/cx18/cx18-irq.c @@ -161,13 +161,15 @@ irqreturn_t cx18_irq_handler(int irq, void *dev_id) */ if (sw2) { - if (sw2 & (cx->scb->cpu2hpu_irq_ack | cx->scb->cpu2epu_irq_ack)) + if (sw2 & (readl(&cx->scb->cpu2hpu_irq_ack) | + readl(&cx->scb->cpu2epu_irq_ack))) wake_up(&cx->mb_cpu_waitq); - if (sw2 & (cx->scb->apu2hpu_irq_ack | cx->scb->apu2epu_irq_ack)) + if (sw2 & (readl(&cx->scb->apu2hpu_irq_ack) | + readl(&cx->scb->apu2epu_irq_ack))) wake_up(&cx->mb_apu_waitq); - if (sw2 & cx->scb->epu2hpu_irq_ack) + if (sw2 & readl(&cx->scb->epu2hpu_irq_ack)) wake_up(&cx->mb_epu_waitq); - if (sw2 & cx->scb->hpu2epu_irq_ack) + if (sw2 & readl(&cx->scb->hpu2epu_irq_ack)) wake_up(&cx->mb_hpu_waitq); } -- cgit v1.2.3 From c1c36f3128c89aa96f01cbf6d40b0cd77a8bc45e Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:32:21 -0300 Subject: V4L/DVB (7967): bt8xx: unaligned access Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/bt8xx/bttv-cards.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index f20a01cfc73..8ef0424c26c 100644 --- a/drivers/media/video/bt8xx/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -34,6 +34,7 @@ #include #include +#include #include #include "bttvp.h" @@ -3858,7 +3859,7 @@ static void __devinit osprey_eeprom(struct bttv *btv, const u8 ee[256]) ee += i; /* found a valid descriptor */ - type = be16_to_cpup((u16*)(ee+4)); + type = get_unaligned_be16((__be16 *)(ee+4)); switch(type) { /* 848 based */ @@ -3918,7 +3919,7 @@ static void __devinit osprey_eeprom(struct bttv *btv, const u8 ee[256]) btv->c.nr, type); break; } - serial = be32_to_cpup((u32*)(ee+6)); + serial = get_unaligned_be32((__be32 *)(ee+6)); } printk(KERN_INFO "bttv%d: osprey eeprom: card=%d '%s' serial=%u\n", -- cgit v1.2.3 From 581a7f1a2ddedbc27ad76f518b861ce1e60ff5ab Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:32:31 -0300 Subject: V4L/DVB (7968): zoran: endianness annotations Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/zoran.h | 4 ++-- drivers/media/video/zoran_device.c | 2 +- drivers/media/video/zoran_driver.c | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/zoran.h b/drivers/media/video/zoran.h index 81cc3b00a07..46b7ad477ce 100644 --- a/drivers/media/video/zoran.h +++ b/drivers/media/video/zoran.h @@ -285,7 +285,7 @@ struct zoran_mapping { struct zoran_jpg_buffer { struct zoran_mapping *map; - u32 *frag_tab; /* addresses of frag table */ + __le32 *frag_tab; /* addresses of frag table */ u32 frag_tab_bus; /* same value cached to save time in ISR */ enum zoran_buffer_state state; /* non-zero if corresponding buffer is in use in grab queue */ struct zoran_sync bs; /* DONE: info to return to application */ @@ -450,7 +450,7 @@ struct zoran { unsigned long jpg_queued_num; /* count of frames queued since grab/play started */ /* zr36057's code buffer table */ - u32 *stat_com; /* stat_com[i] is indexed by dma_head/tail & BUZ_MASK_STAT_COM */ + __le32 *stat_com; /* stat_com[i] is indexed by dma_head/tail & BUZ_MASK_STAT_COM */ /* (value & BUZ_MASK_FRAME) corresponds to index in pend[] queue */ int jpg_pend[BUZ_MAX_FRAME]; diff --git a/drivers/media/video/zoran_device.c b/drivers/media/video/zoran_device.c index 37629ffd34c..88d369708e4 100644 --- a/drivers/media/video/zoran_device.c +++ b/drivers/media/video/zoran_device.c @@ -1320,7 +1320,7 @@ error_handler (struct zoran *zr, if (i) { /* Rotate stat_comm entries to make current entry first */ int j; - u32 bus_addr[BUZ_NUM_STAT_COM]; + __le32 bus_addr[BUZ_NUM_STAT_COM]; /* Here we are copying the stat_com array, which * is already in little endian format, so diff --git a/drivers/media/video/zoran_driver.c b/drivers/media/video/zoran_driver.c index b75313d8c3a..5394d7a5cfe 100644 --- a/drivers/media/video/zoran_driver.c +++ b/drivers/media/video/zoran_driver.c @@ -495,7 +495,7 @@ jpg_fbuffer_alloc (struct file *file) jpg_fbuffer_free(file); return -ENOBUFS; } - fh->jpg_buffers.buffer[i].frag_tab = (u32 *) mem; + fh->jpg_buffers.buffer[i].frag_tab = (__le32 *) mem; fh->jpg_buffers.buffer[i].frag_tab_bus = virt_to_bus((void *) mem); @@ -4506,7 +4506,7 @@ zoran_mmap (struct file *file, if (todo > fraglen) todo = fraglen; pos = - le32_to_cpu((unsigned long) fh->jpg_buffers. + le32_to_cpu(fh->jpg_buffers. buffer[i].frag_tab[2 * j]); /* should just be pos on i386 */ page = virt_to_phys(bus_to_virt(pos)) -- cgit v1.2.3 From fa9c13a383ea60b5e0a89e9e180683411bc5552c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:32:41 -0300 Subject: V4L/DVB (7969): m920x: unaligned access Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/m920x.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/dvb-usb/m920x.c b/drivers/media/dvb/dvb-usb/m920x.c index a12e6f784fd..54626a0dbf6 100644 --- a/drivers/media/dvb/dvb-usb/m920x.c +++ b/drivers/media/dvb/dvb-usb/m920x.c @@ -16,6 +16,7 @@ #include "qt1010.h" #include "tda1004x.h" #include "tda827x.h" +#include /* debug */ static int dvb_usb_m920x_debug; @@ -347,13 +348,13 @@ static int m920x_firmware_download(struct usb_device *udev, const struct firmwar for (pass = 0; pass < 2; pass++) { for (i = 0; i + (sizeof(u16) * 3) < fw->size;) { - value = le16_to_cpu(*(u16 *)(fw->data + i)); + value = get_unaligned_le16(fw->data + i); i += sizeof(u16); - index = le16_to_cpu(*(u16 *)(fw->data + i)); + index = get_unaligned_le16(fw->data + i); i += sizeof(u16); - size = le16_to_cpu(*(u16 *)(fw->data + i)); + size = get_unaligned_le16(fw->data + i); i += sizeof(u16); if (pass == 1) { -- cgit v1.2.3 From a954b6681dd389e6bb63d9b5f3254d675f6984c9 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:32:51 -0300 Subject: V4L/DVB (7970): mix trivial endianness annotations Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-video.c | 8 ++++---- drivers/media/video/usbvideo/quickcam_messenger.c | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 8996175cc95..fb163ecd921 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -1166,13 +1166,13 @@ static int vidioc_g_register(struct file *file, void *priv, reg->val = ret; } else { - u64 val = 0; + __le64 val = 0; ret = em28xx_read_reg_req_len(dev, USB_REQ_GET_STATUS, reg->reg, (char *)&val, 2); if (ret < 0) return ret; - reg->val = cpu_to_le64((__u64)val); + reg->val = le64_to_cpu(val); } return 0; @@ -1183,9 +1183,9 @@ static int vidioc_s_register(struct file *file, void *priv, { struct em28xx_fh *fh = priv; struct em28xx *dev = fh->dev; - u64 buf; + __le64 buf; - buf = le64_to_cpu((__u64)reg->val); + buf = cpu_to_le64(reg->val); return em28xx_write_regs(dev, reg->reg, (char *)&buf, em28xx_reg_len(reg->reg)); diff --git a/drivers/media/video/usbvideo/quickcam_messenger.c b/drivers/media/video/usbvideo/quickcam_messenger.c index 32e536edf09..3d26a30abe1 100644 --- a/drivers/media/video/usbvideo/quickcam_messenger.c +++ b/drivers/media/video/usbvideo/quickcam_messenger.c @@ -210,7 +210,7 @@ static int qcm_stv_setb(struct usb_device *dev, u16 reg, u8 val) return ret; } -static int qcm_stv_setw(struct usb_device *dev, u16 reg, u16 val) +static int qcm_stv_setw(struct usb_device *dev, u16 reg, __le16 val) { int ret; -- cgit v1.2.3 From 637007fe5cfc790c46e3d7af8ba069ddd73f389c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:33:01 -0300 Subject: V4L/DVB (7971): usb: unaligned Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/dvb-usb-firmware.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c b/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c index e1112e39fb6..733a7ff7b20 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c +++ b/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c @@ -127,7 +127,7 @@ int dvb_usb_get_hexline(const struct firmware *fw, struct hexline *hx, if ((*pos + hx->len + 4) >= fw->size) return -EINVAL; - hx->addr = le16_to_cpu( *((u16 *) &b[1]) ); + hx->addr = b[1] | (b[2] << 8); hx->type = b[3]; if (hx->type == 0x04) { -- cgit v1.2.3 From 18dcd55a8bf8aa7009c647725b5234c9589c6985 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:33:11 -0300 Subject: V4L/DVB (7972): or51132.c: unaligned Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/or51132.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/frontends/or51132.c b/drivers/media/dvb/frontends/or51132.c index c7b5785f81f..5ed32544de3 100644 --- a/drivers/media/dvb/frontends/or51132.c +++ b/drivers/media/dvb/frontends/or51132.c @@ -126,7 +126,7 @@ static int or51132_readreg(struct or51132_state *state, u8 reg) reg, err); return -EREMOTEIO; } - return le16_to_cpup((u16*)buf); + return buf[0] | (buf[1] << 8); } static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware *fw) @@ -140,9 +140,9 @@ static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware dprintk("Firmware is %Zd bytes\n",fw->size); /* Get size of firmware A and B */ - firmwareAsize = le32_to_cpu(*((u32*)fw->data)); + firmwareAsize = le32_to_cpu(*((__le32*)fw->data)); dprintk("FirmwareA is %i bytes\n",firmwareAsize); - firmwareBsize = le32_to_cpu(*((u32*)(fw->data+4))); + firmwareBsize = le32_to_cpu(*((__le32*)(fw->data+4))); dprintk("FirmwareB is %i bytes\n",firmwareBsize); /* Upload firmware */ -- cgit v1.2.3 From 6637dea60ec93916ea0623a0e9bcc2b1769cbc11 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 20 May 2008 19:34:09 -0300 Subject: V4L/DVB (7974): fix MEDIA_TUNER && FW_LOADER build error -tip testing found the following build failure: LD .tmp_vmlinux1 drivers/built-in.o: In function `generic_set_freq': tuner-xc2028.c:(.text+0xbd896): undefined reference to `request_firmware' tuner-xc2028.c:(.text+0xbdd7a): undefined reference to `release_firmware' drivers/built-in.o: In function `xc_load_fw_and_init_tuner': xc5000.c:(.text+0xc68e6): undefined reference to `request_firmware' xc5000.c:(.text+0xc6abe): undefined reference to `release_firmware' with this config: http://redhat.com/~mingo/misc/config-Tue_May_20_18_11_34_CEST_2008.bad the reason is another kconfig tool bug that has to be worked around in the driver's Kconfig file: if FW_LOADER is selected in a second dependency, that is not properly propagated up the dependencies. in this case, FW_LOADER is selected from MEDIA_TUNER_XC2028: config MEDIA_TUNER_XC2028 tristate "XCeive xc2028/xc3028 tuners" depends on VIDEO_MEDIA && I2C depends on HOTPLUG select FW_LOADER which got selected by MEDIA_TUNER: config MEDIA_TUNER tristate default VIDEO_MEDIA && I2C depends on VIDEO_MEDIA && I2C select FW_LOADER if !MEDIA_TUNER_CUSTOMIZE && HOTPLUG but the kconfig tool did not pick up this second-order dependency and allowed CONFIG_FW_LOADER=m to be selected - in which case the build fails. the workaround i found was to move the select of FW_LOADER one level up, so that the buggy kconfig tool can notice it and can act appropriately. This problem can probably be worked around in other ways as well, i went for the minimal fix. Obviously, the kconfig tool should be fixed, it is not reasonable to expect driver authors to do manual dependency resolution (that kconfig itself already does) and uglify the Kconfig files. The kconfig tool did nothing to warn about this situation and did not prevent this faulty .config from being constructed. Signed-off-by: Ingo Molnar Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/media/common/tuners/Kconfig b/drivers/media/common/tuners/Kconfig index d6206540476..85482960d01 100644 --- a/drivers/media/common/tuners/Kconfig +++ b/drivers/media/common/tuners/Kconfig @@ -21,6 +21,7 @@ config MEDIA_TUNER tristate default VIDEO_MEDIA && I2C depends on VIDEO_MEDIA && I2C + select FW_LOADER if !MEDIA_TUNER_CUSTOMIZE && HOTPLUG select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE && HOTPLUG select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMIZE && HOTPLUG select MEDIA_TUNER_MT20XX if !MEDIA_TUNER_CUSTOMIZE -- cgit v1.2.3 From 388748e61cc59487c34e1dfa890ffc44e4d16b1f Mon Sep 17 00:00:00 2001 From: Dmitri Belimov Date: Wed, 21 May 2008 01:20:34 -0300 Subject: V4L/DVB (7975): saa7134_empress This is patch for fix data structure in querycap syscall. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-empress.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c index 1314522a813..81431ee4184 100644 --- a/drivers/media/video/saa7134/saa7134-empress.c +++ b/drivers/media/video/saa7134/saa7134-empress.c @@ -163,8 +163,7 @@ ts_mmap(struct file *file, struct vm_area_struct * vma) static int empress_querycap(struct file *file, void *priv, struct v4l2_capability *cap) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; + struct saa7134_dev *dev = file->private_data; strcpy(cap->driver, "saa7134"); strlcpy(cap->card, saa7134_boards[dev->board].name, -- cgit v1.2.3 From 5e7fdc5ed820516f8253cc7daad27cf3ee6bd784 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 30 May 2008 10:51:53 -0300 Subject: V4L/DVB (7977): cx18: fix init order and remove duplicate open_on_first_use. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx18/cx18-driver.c | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index 4f5d23127fc..2b810bb2a4c 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -751,17 +751,6 @@ static int __devinit cx18_probe(struct pci_dev *dev, if (cx->options.radio > 0) cx->v4l2_cap |= V4L2_CAP_RADIO; - retval = cx18_streams_setup(cx); - if (retval) { - CX18_ERR("Error %d setting up streams\n", retval); - goto free_irq; - } - retval = cx18_streams_register(cx); - if (retval) { - CX18_ERR("Error %d registering devices\n", retval); - goto free_streams; - } - if (cx->options.tuner > -1) { struct tuner_setup setup; @@ -788,7 +777,16 @@ static int __devinit cx18_probe(struct pci_dev *dev, are not. */ cx->tuner_std = cx->std; - cx18_init_on_first_open(cx); + retval = cx18_streams_setup(cx); + if (retval) { + CX18_ERR("Error %d setting up streams\n", retval); + goto free_irq; + } + retval = cx18_streams_register(cx); + if (retval) { + CX18_ERR("Error %d registering devices\n", retval); + goto free_streams; + } CX18_INFO("Initialized card #%d: %s\n", cx->num, cx->card_name); -- cgit v1.2.3 From 4ecc24737700f07d6c2a8fdf8c1737e399f1830f Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 30 May 2008 11:03:12 -0300 Subject: V4L/DVB (7978): cx18: explicitly test for XC2028 tuner Testing whether xceive_pin is non-zero is not good enough as 0 is a valid value. Instead explicitly test whether the Xceive tuner is used. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx18/cx18-gpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/video/cx18/cx18-gpio.c b/drivers/media/video/cx18/cx18-gpio.c index 2f324b8467c..ceb63653c92 100644 --- a/drivers/media/video/cx18/cx18-gpio.c +++ b/drivers/media/video/cx18/cx18-gpio.c @@ -62,7 +62,7 @@ void cx18_gpio_init(struct cx18 *cx) cx->gpio_dir = cx->card->gpio_init.direction; cx->gpio_val = cx->card->gpio_init.initial_value; - if (cx->card->xceive_pin) { + if (cx->card->tuners[0].tuner == TUNER_XC2028) { cx->gpio_dir |= 1 << cx->card->xceive_pin; cx->gpio_val |= 1 << cx->card->xceive_pin; } -- cgit v1.2.3 From fc60d6e2727157b53d49c8d55888d0a78dafbc9f Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sat, 31 May 2008 18:18:55 -0300 Subject: V4L/DVB (7983): tda18271_calc_rf_cal must return the return value of tda18271_lookup_map On the TDA18271HD/C1, we perform RF tracking filter correction for VHF low band, only. If supplied a frequency out of range, the error must be returned to the caller (tda18271c1_rf_tracking_filter_calibration) so that it can decide whether or not to write to register EB14, RFC_CPROG[7:0] Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/tda18271-common.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/common/tuners/tda18271-common.c b/drivers/media/common/tuners/tda18271-common.c index 42b5f5d4bfe..f1894fec32b 100644 --- a/drivers/media/common/tuners/tda18271-common.c +++ b/drivers/media/common/tuners/tda18271-common.c @@ -648,11 +648,11 @@ int tda18271_calc_rf_cal(struct dvb_frontend *fe, u32 *freq) unsigned char *regs = priv->tda18271_regs; u8 val; - tda18271_lookup_map(fe, RF_CAL, freq, &val); + int ret = tda18271_lookup_map(fe, RF_CAL, freq, &val); regs[R_EB14] = val; - return 0; + return ret; } /* -- cgit v1.2.3 From a9606ce697ed719071fcccee8591ff033fa5e16d Mon Sep 17 00:00:00 2001 From: Daniel Gimpelevich Date: Tue, 3 Jun 2008 21:29:45 -0300 Subject: V4L/DVB (7990): Fix entry for PowerColor RA 330 and make it run with firmware version 2.7 Signed-off-by: Daniel Gimpelevich Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx88/cx88-cards.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index aeba26dc0a3..fa6d398e97b 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -1493,10 +1493,16 @@ static const struct cx88_board cx88_boards[] = { }, }, [CX88_BOARD_POWERCOLOR_REAL_ANGEL] = { - .name = "PowerColor Real Angel 330", + .name = "PowerColor RA330", /* Long names may confuse LIRC. */ .tuner_type = TUNER_XC2028, .tuner_addr = 0x61, .input = { { + .type = CX88_VMUX_DEBUG, + .vmux = 3, /* Due to the way the cx88 driver is written, */ + .gpio0 = 0x00ff, /* there is no way to deactivate audio pass- */ + .gpio1 = 0xf39d, /* through without this entry. Furthermore, if */ + .gpio3 = 0x0000, /* the TV mux entry is first, you get audio */ + }, { /* from the tuner on boot for a little while. */ .type = CX88_VMUX_TELEVISION, .vmux = 0, .gpio0 = 0x00ff, @@ -2424,8 +2430,9 @@ void cx88_setup_xc3028(struct cx88_core *core, struct xc2028_ctrl *ctl) switch (core->boardnr) { case CX88_BOARD_POWERCOLOR_REAL_ANGEL: - /* Doesn't work with firmware version 2.7 */ - ctl->fname = "xc3028-v25.fw"; + /* Now works with firmware version 2.7 */ + if (core->i2c_algo.udelay < 16) + core->i2c_algo.udelay = 16; break; case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO: ctl->scode_table = XC3028_FE_ZARLINK456; -- cgit v1.2.3 From 67642a0a58143761d7415f0587e0ac6dd6371251 Mon Sep 17 00:00:00 2001 From: Sigmund Augdal Date: Thu, 5 Jun 2008 12:53:08 -0300 Subject: V4L/DVB (8000): tda827x: fix NULL pointer in tda827xa_lna_gain Check that tda827x_config is defined before attempting to use it. Signed-off-by: Sigmund Augdal Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/tda827x.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/common/tuners/tda827x.c b/drivers/media/common/tuners/tda827x.c index d30d2c9094d..8555d9cf905 100644 --- a/drivers/media/common/tuners/tda827x.c +++ b/drivers/media/common/tuners/tda827x.c @@ -418,13 +418,13 @@ static void tda827xa_lna_gain(struct dvb_frontend *fe, int high, unsigned char buf[] = {0x22, 0x01}; int arg; int gp_func; - struct i2c_msg msg = { .addr = priv->cfg->switch_addr, .flags = 0, - .buf = buf, .len = sizeof(buf) }; + struct i2c_msg msg = { .flags = 0, .buf = buf, .len = sizeof(buf) }; if (NULL == priv->cfg) { dprintk("tda827x_config not defined, cannot set LNA gain!\n"); return; } + msg.addr = priv->cfg->switch_addr; if (priv->cfg->config) { if (high) dprintk("setting LNA to high gain\n"); -- cgit v1.2.3 From be573e7872432918e1017cf1e917e73817dcdad6 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Thu, 5 Jun 2008 13:08:29 -0300 Subject: V4L/DVB (8001): dib0070: fix dib0070_attach when !CONFIG_DVB_TUNER_DIB0070 Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/dib0070.h | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/dvb/frontends/dib0070.h b/drivers/media/dvb/frontends/dib0070.h index 786e37d3388..3eedfdf505b 100644 --- a/drivers/media/dvb/frontends/dib0070.h +++ b/drivers/media/dvb/frontends/dib0070.h @@ -37,7 +37,20 @@ struct dib0070_config { u8 flip_chip; }; -extern struct dvb_frontend * dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg); +#if defined(CONFIG_DVB_TUNER_DIB0070) || (defined(CONFIG_DVB_TUNER_DIB0070_MODULE) && defined(MODULE)) +extern struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, + struct dib0070_config *cfg); +#else +static inline struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, + struct dib0070_config *cfg) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + extern void dib0070_ctrl_agc_filter(struct dvb_frontend *, uint8_t open); extern u16 dib0070_wbd_offset(struct dvb_frontend *); -- cgit v1.2.3 From 6311c90a9ea16b4ab93ed48f1a9022647f6b3c43 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Thu, 5 Jun 2008 14:44:39 +0100 Subject: libata: fix G5 SATA broken on -rc5 Fix G5 SATA irq 18: nobody cared, reported on -rc5 by Olaf Hering: fixlet to a57c1bade5a0ee5cd8b74502db9cbebb7f5780b2 libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl Signed-off-by: Hugh Dickins Acked-by: Alan Cox Tested-by: Olaf Hering Signed-off-by: Linus Torvalds --- drivers/ata/libata-sff.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 90d20c615ef..215d18672a5 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -278,7 +278,7 @@ static u8 ata_sff_irq_status(struct ata_port *ap) return status; } /* Clear INTRQ latch */ - status = ata_sff_check_status(ap); + status = ap->ops->sff_check_status(ap); return status; } -- cgit v1.2.3 From 5a515bcbea580a65ced92405b083299df9003748 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 5 Jun 2008 10:32:23 -0600 Subject: PNP: skip UNSET MEM resources as well as DISABLED ones We don't need to reserve "unset" resources. Trying to reserve them results in messages like this, which are ugly but harmless: system 00:08: iomem range 0x0-0x0 could not be reserved Future PNP patches will remove use of IORESOURCE_UNSET, but we still need it for now. Signed-off-by: Bjorn Helgaas Signed-off-by: Linus Torvalds --- drivers/pnp/system.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pnp/system.c b/drivers/pnp/system.c index 8f0a570509c..cf4e07b01d4 100644 --- a/drivers/pnp/system.c +++ b/drivers/pnp/system.c @@ -81,7 +81,7 @@ static void reserve_resources_of_dev(struct pnp_dev *dev) } for (i = 0; (res = pnp_get_resource(dev, IORESOURCE_MEM, i)); i++) { - if (res->flags & IORESOURCE_DISABLED) + if (res->flags & (IORESOURCE_UNSET | IORESOURCE_DISABLED)) continue; reserve_range(dev, res->start, res->end, 0); -- cgit v1.2.3 From efedf51c866130945b5db755cb58670e60205d83 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Wed, 4 Jun 2008 17:18:42 +0200 Subject: Add 'rd' alias to new brd ramdisk driver Alias brd to rd in the hope of helping legacy users. Suggested by Jan. Signed-off-by: Nick Piggin Signed-off-by: Linus Torvalds --- drivers/block/brd.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/block/brd.c b/drivers/block/brd.c index 680cdfc00b9..24b97b0bef9 100644 --- a/drivers/block/brd.c +++ b/drivers/block/brd.c @@ -397,6 +397,7 @@ module_param(max_part, int, 0); MODULE_PARM_DESC(max_part, "Maximum number of partitions per RAM disk"); MODULE_LICENSE("GPL"); MODULE_ALIAS_BLOCKDEV_MAJOR(RAMDISK_MAJOR); +MODULE_ALIAS("rd"); #ifndef MODULE /* Legacy boot options - nonmodular */ -- cgit v1.2.3 From 203c80187eba037f2d6562e0d5847014746726dd Mon Sep 17 00:00:00 2001 From: Ben Collins Date: Thu, 5 Jun 2008 19:10:21 -0400 Subject: mmc: Fix crash in mmc_block on 64-bit Fairly simple. "dev_use" was being allocated as a zero length array because of bad math on 64-bit systems, causing a crash in find_first_zero_bit(). One-liner follows: Signed-off-by: Ben Collins Acked-by: Pierre Ossman Signed-off-by: Linus Torvalds --- drivers/mmc/card/block.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 91ded3e8240..f9ad960d7c1 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -46,7 +46,7 @@ #define MMC_SHIFT 3 #define MMC_NUM_MINORS (256 >> MMC_SHIFT) -static unsigned long dev_use[MMC_NUM_MINORS/(8*sizeof(unsigned long))]; +static DECLARE_BITMAP(dev_use, MMC_NUM_MINORS); /* * There is one mmc_blk_data per slot. -- cgit v1.2.3 From bc01886352c277e310c07befadbb617c8f561b89 Mon Sep 17 00:00:00 2001 From: Chen Gong Date: Thu, 5 Jun 2008 21:50:04 +0800 Subject: [MTD] m25p80.c mutex unlock fix fix a mutex release bug in function m25p80_write. Signed-off-by: Chen Gong Signed-off-by: David Woodhouse --- drivers/mtd/devices/m25p80.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 25efd331ef2..b402269301f 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -346,8 +346,10 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len, mutex_lock(&flash->lock); /* Wait until finished previous write command. */ - if (wait_till_ready(flash)) + if (wait_till_ready(flash)) { + mutex_unlock(&flash->lock); return 1; + } write_enable(flash); -- cgit v1.2.3 From 71cde5879f10b639506bc0b9f29a89f58b42a17e Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Wed, 21 May 2008 13:37:34 +0200 Subject: KVM: s390: handle machine checks when guest is running The low-level interrupt handler on s390 checks for _TIF_WORK_INT and exits the guest context, if work is pending. TIF_WORK_INT is defined as_TIF_SIGPENDING | _TIF_NEED_RESCHED | _TIF_MCCK_PENDING. Currently the sie loop checks for signals and reschedule, but it does not check for machine checks. That means that we exit the guest context if a machine check is pending, but we do not handle the machine check. Signed-off-by: Christian Borntraeger CC: Heiko Carstens Signed-off-by: Carsten Otte Signed-off-by: Avi Kivity --- drivers/s390/s390mach.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/s390/s390mach.c b/drivers/s390/s390mach.c index 5080f343ad7..5bfbe765983 100644 --- a/drivers/s390/s390mach.c +++ b/drivers/s390/s390mach.c @@ -207,6 +207,7 @@ s390_handle_mcck(void) do_exit(SIGSEGV); } } +EXPORT_SYMBOL_GPL(s390_handle_mcck); /* * returns 0 if all registers could be validated -- cgit v1.2.3 From 088af1543c611f4200658250b6a4467b7eb496a6 Mon Sep 17 00:00:00 2001 From: Joachim Fenkes Date: Fri, 6 Jun 2008 11:21:33 -0700 Subject: IB/ehca: Reject send WRs only for RESET, INIT and RTR state Signed-off-by: Joachim Fenkes Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ehca/ehca_reqs.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c index bbe0436f4f7..f093b0033da 100644 --- a/drivers/infiniband/hw/ehca/ehca_reqs.c +++ b/drivers/infiniband/hw/ehca/ehca_reqs.c @@ -421,8 +421,10 @@ int ehca_post_send(struct ib_qp *qp, int ret = 0; unsigned long flags; - if (unlikely(my_qp->state != IB_QPS_RTS)) { - ehca_err(qp->device, "QP not in RTS state qpn=%x", qp->qp_num); + /* Reject WR if QP is in RESET, INIT or RTR state */ + if (unlikely(my_qp->state < IB_QPS_RTS)) { + ehca_err(qp->device, "Invalid QP state qp_state=%d qpn=%x", + my_qp->state, qp->qp_num); return -EINVAL; } -- cgit v1.2.3 From 27676a3e166b352928a8ef7b1c0e322f3c471a3e Mon Sep 17 00:00:00 2001 From: Ralph Campbell Date: Fri, 6 Jun 2008 11:23:29 -0700 Subject: IB/ipath: Fix SM trap forwarding SM/SMA traps received by the ipath driver should be forwarded to the SM if it is running on the host. The ib_ipath driver was incorrectly replying with "bad method." Signed-off-by: Ralph Campbell Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_mad.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/ipath/ipath_mad.c b/drivers/infiniband/hw/ipath/ipath_mad.c index 1ff46ae7dd9..5f9315d77a4 100644 --- a/drivers/infiniband/hw/ipath/ipath_mad.c +++ b/drivers/infiniband/hw/ipath/ipath_mad.c @@ -1492,6 +1492,10 @@ static int process_subn(struct ib_device *ibdev, int mad_flags, goto bail; } + case IB_MGMT_METHOD_TRAP: + case IB_MGMT_METHOD_REPORT: + case IB_MGMT_METHOD_REPORT_RESP: + case IB_MGMT_METHOD_TRAP_REPRESS: case IB_MGMT_METHOD_GET_RESP: /* * The ib_mad module will call us to process responses -- cgit v1.2.3 From b2c8daddcbe03a22402ecf943bb88302601c6835 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 5 Jun 2008 22:45:50 -0700 Subject: spi: fix refcount-related spidev oops-on-rmmod This addresses other oopsing paths in "spidev" by changing how it manages refcounting. It decouples the lifecycle of the per-device data from the class device (not just the spi device): - Use class_{create,destroy} not class_{register,unregister}. - Use device_{create,destroy} not device_{register,unregister}. - Free the per-device data only when TWO conditions are true: * Driver is unbound from underlying SPI device, and * Device is no longer open (new) Also, spi_{get,set}_drvdata not dev_{get,set}_drvdata for simpler code. Signed-off-by: David Brownell Sebastian Siewior Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/spidev.c | 64 ++++++++++++++++++++++++++++------------------------ 1 file changed, 34 insertions(+), 30 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 41620c0fb04..799337f7fde 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include @@ -67,11 +68,12 @@ static unsigned long minors[N_SPI_MINORS / BITS_PER_LONG]; | SPI_LSB_FIRST | SPI_3WIRE | SPI_LOOP) struct spidev_data { - struct device dev; + dev_t devt; spinlock_t spi_lock; struct spi_device *spi; struct list_head device_entry; + /* buffer is NULL unless this device is open (users > 0) */ struct mutex buf_lock; unsigned users; u8 *buffer; @@ -467,7 +469,7 @@ static int spidev_open(struct inode *inode, struct file *filp) mutex_lock(&device_list_lock); list_for_each_entry(spidev, &device_list, device_entry) { - if (spidev->dev.devt == inode->i_rdev) { + if (spidev->devt == inode->i_rdev) { status = 0; break; } @@ -500,10 +502,22 @@ static int spidev_release(struct inode *inode, struct file *filp) mutex_lock(&device_list_lock); spidev = filp->private_data; filp->private_data = NULL; + + /* last close? */ spidev->users--; if (!spidev->users) { + int dofree; + kfree(spidev->buffer); spidev->buffer = NULL; + + /* ... after we unbound from the underlying device? */ + spin_lock_irq(&spidev->spi_lock); + dofree = (spidev->spi == NULL); + spin_unlock_irq(&spidev->spi_lock); + + if (dofree) + kfree(spidev); } mutex_unlock(&device_list_lock); @@ -530,19 +544,7 @@ static struct file_operations spidev_fops = { * It also simplifies memory management. */ -static void spidev_classdev_release(struct device *dev) -{ - struct spidev_data *spidev; - - spidev = container_of(dev, struct spidev_data, dev); - kfree(spidev); -} - -static struct class spidev_class = { - .name = "spidev", - .owner = THIS_MODULE, - .dev_release = spidev_classdev_release, -}; +static struct class *spidev_class; /*-------------------------------------------------------------------------*/ @@ -570,20 +572,20 @@ static int spidev_probe(struct spi_device *spi) mutex_lock(&device_list_lock); minor = find_first_zero_bit(minors, N_SPI_MINORS); if (minor < N_SPI_MINORS) { - spidev->dev.parent = &spi->dev; - spidev->dev.class = &spidev_class; - spidev->dev.devt = MKDEV(SPIDEV_MAJOR, minor); - snprintf(spidev->dev.bus_id, sizeof spidev->dev.bus_id, + struct device *dev; + + spidev->devt = MKDEV(SPIDEV_MAJOR, minor); + dev = device_create(spidev_class, &spi->dev, spidev->devt, "spidev%d.%d", spi->master->bus_num, spi->chip_select); - status = device_register(&spidev->dev); + status = IS_ERR(dev) ? PTR_ERR(dev) : 0; } else { dev_dbg(&spi->dev, "no minor number available!\n"); status = -ENODEV; } if (status == 0) { set_bit(minor, minors); - dev_set_drvdata(&spi->dev, spidev); + spi_set_drvdata(spi, spidev); list_add(&spidev->device_entry, &device_list); } mutex_unlock(&device_list_lock); @@ -596,19 +598,21 @@ static int spidev_probe(struct spi_device *spi) static int spidev_remove(struct spi_device *spi) { - struct spidev_data *spidev = dev_get_drvdata(&spi->dev); + struct spidev_data *spidev = spi_get_drvdata(spi); /* make sure ops on existing fds can abort cleanly */ spin_lock_irq(&spidev->spi_lock); spidev->spi = NULL; + spi_set_drvdata(spi, NULL); spin_unlock_irq(&spidev->spi_lock); /* prevent new opens */ mutex_lock(&device_list_lock); list_del(&spidev->device_entry); - dev_set_drvdata(&spi->dev, NULL); - clear_bit(MINOR(spidev->dev.devt), minors); - device_unregister(&spidev->dev); + device_destroy(spidev_class, spidev->devt); + clear_bit(MINOR(spidev->devt), minors); + if (spidev->users == 0) + kfree(spidev); mutex_unlock(&device_list_lock); return 0; @@ -644,15 +648,15 @@ static int __init spidev_init(void) if (status < 0) return status; - status = class_register(&spidev_class); - if (status < 0) { + spidev_class = class_create(THIS_MODULE, "spidev"); + if (IS_ERR(spidev_class)) { unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name); - return status; + return PTR_ERR(spidev_class); } status = spi_register_driver(&spidev_spi); if (status < 0) { - class_unregister(&spidev_class); + class_destroy(spidev_class); unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name); } return status; @@ -662,7 +666,7 @@ module_init(spidev_init); static void __exit spidev_exit(void) { spi_unregister_driver(&spidev_spi); - class_unregister(&spidev_class); + class_destroy(spidev_class); unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name); } module_exit(spidev_exit); -- cgit v1.2.3 From e0a115e5aa554b93150a8dc1c3fe15467708abb2 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 5 Jun 2008 22:45:52 -0700 Subject: md: fix prexor vs sync_request race During the initial array synchronization process there is a window between when a prexor operation is scheduled to a specific stripe and when it completes for a sync_request to be scheduled to the same stripe. When this happens the prexor completes and the stripe is unconditionally marked "insync", effectively canceling the sync_request for the stripe. Prior to 2.6.23 this was not a problem because the prexor operation was done under sh->lock. The effect in older kernels being that the prexor would still erroneously mark the stripe "insync", but sync_request would be held off and re-mark the stripe as "!in_sync". Change the write completion logic to not mark the stripe "in_sync" if a prexor was performed. The effect of the change is to sometimes not set STRIPE_INSYNC. The worst this can do is cause the resync to stall waiting for STRIPE_INSYNC to be set. If this were happening, then STRIPE_SYNCING would be set and handle_issuing_new_read_requests would cause all available blocks to eventually be read, at which point prexor would never be used on that stripe any more and STRIPE_INSYNC would eventually be set. echo repair > /sys/block/mdN/md/sync_action will correct arrays that may have lost this race. Cc: Signed-off-by: Dan Williams Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/md/raid5.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 425958a76b8..f0f0585c107 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -2645,6 +2645,7 @@ static void handle_stripe5(struct stripe_head *sh) struct r5dev *dev; unsigned long pending = 0; mdk_rdev_t *blocked_rdev = NULL; + int prexor; memset(&s, 0, sizeof(s)); pr_debug("handling stripe %llu, state=%#lx cnt=%d, pd_idx=%d " @@ -2774,9 +2775,11 @@ static void handle_stripe5(struct stripe_head *sh) /* leave prexor set until postxor is done, allows us to distinguish * a rmw from a rcw during biodrain */ + prexor = 0; if (test_bit(STRIPE_OP_PREXOR, &sh->ops.complete) && test_bit(STRIPE_OP_POSTXOR, &sh->ops.complete)) { + prexor = 1; clear_bit(STRIPE_OP_PREXOR, &sh->ops.complete); clear_bit(STRIPE_OP_PREXOR, &sh->ops.ack); clear_bit(STRIPE_OP_PREXOR, &sh->ops.pending); @@ -2810,6 +2813,8 @@ static void handle_stripe5(struct stripe_head *sh) if (!test_and_set_bit( STRIPE_OP_IO, &sh->ops.pending)) sh->ops.count++; + if (prexor) + continue; if (!test_bit(R5_Insync, &dev->flags) || (i == sh->pd_idx && s.failed == 0)) set_bit(STRIPE_INSYNC, &sh->state); -- cgit v1.2.3 From a6d8113a986c66aeb379a26b6e0062488b3e59e1 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 5 Jun 2008 22:45:53 -0700 Subject: md: fix uninitialized use of mddev->recovery_wait If an array was created with --assume-clean we will oops when trying to set ->resync_max. Fix this by initializing ->recovery_wait in mddev_find. Cc: Signed-off-by: Dan Williams Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/md/md.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index 51c19f86ff9..7cf512a34cc 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -276,6 +276,7 @@ static mddev_t * mddev_find(dev_t unit) atomic_set(&new->active, 1); spin_lock_init(&new->write_lock); init_waitqueue_head(&new->sb_wait); + init_waitqueue_head(&new->recovery_wait); new->reshape_position = MaxSector; new->resync_max = MaxSector; new->level = LEVEL_NONE; @@ -5665,7 +5666,6 @@ void md_do_sync(mddev_t *mddev) window/2,(unsigned long long) max_sectors/2); atomic_set(&mddev->recovery_active, 0); - init_waitqueue_head(&mddev->recovery_wait); last_check = 0; if (j>2) { -- cgit v1.2.3 From c337869d95011495fa181536786e74aa2d7ff031 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 5 Jun 2008 22:45:54 -0700 Subject: md: do not compute parity unless it is on a failed drive If a block is computed (rather than read) then a check/repair operation may be lead to believe that the data on disk is correct, when infact it isn't. So only compute blocks for failed devices. This issue has been around since at least 2.6.12, but has become harder to hit in recent kernels since most reads bypass the cache. echo repair > /sys/block/mdN/md/sync_action will set the parity blocks to the correct state. Cc: Signed-off-by: Dan Williams Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/md/raid5.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index f0f0585c107..c37e256b117 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -2002,6 +2002,7 @@ static int __handle_issuing_new_read_requests5(struct stripe_head *sh, * have quiesced. */ if ((s->uptodate == disks - 1) && + (s->failed && disk_idx == s->failed_num) && !test_bit(STRIPE_OP_CHECK, &sh->ops.pending)) { set_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending); set_bit(R5_Wantcompute, &dev->flags); @@ -2087,7 +2088,9 @@ static void handle_issuing_new_read_requests6(struct stripe_head *sh, /* we would like to get this block, possibly * by computing it, but we might not be able to */ - if (s->uptodate == disks-1) { + if ((s->uptodate == disks - 1) && + (s->failed && (i == r6s->failed_num[0] || + i == r6s->failed_num[1]))) { pr_debug("Computing stripe %llu block %d\n", (unsigned long long)sh->sector, i); compute_block_1(sh, i, 0); -- cgit v1.2.3 From e2d4ecafd24d6eee4ae6bdbede0cfd0e78423a33 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Thu, 5 Jun 2008 22:45:56 -0700 Subject: modedb: fix incorrect sync and vmode flags for CVT modes The temporary structure for calculated CVT mode is not initialized. Few fields have only bits or-ed or and-ed so they may be left in incorrect (random) state. Testing of the tridentfb seems like a good exercise for the fbdev layer. Signed-off-by: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/modedb.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c index 47356219158..d1bbef930df 100644 --- a/drivers/video/modedb.c +++ b/drivers/video/modedb.c @@ -590,6 +590,7 @@ done: "", (margins) ? " with margins" : "", (interlace) ? " interlaced" : ""); + memset(&cvt_mode, 0, sizeof(cvt_mode)); cvt_mode.xres = xres; cvt_mode.yres = yres; cvt_mode.refresh = (refresh) ? refresh : 60; -- cgit v1.2.3 From 4feead71fa68a41db1d4f065c0f91fd67288877d Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 5 Jun 2008 22:45:58 -0700 Subject: serial: fix driver_name conflicts Some drivers are using too generic "serial" name for driver_name, this might cause issues, like this: Freescale QUICC Engine UART device driver proc_dir_entry 'serial' already registered Call Trace: [cf82de50] [c0007f7c] show_stack+0x4c/0x1ac (unreliable) [cf82de90] [c00b03fc] proc_register+0xfc/0x1ac [cf82dec0] [c00b05c8] create_proc_entry+0x60/0xac [cf82dee0] [c00b23dc] proc_tty_register_driver+0x60/0x98 [cf82def0] [c016dbd8] tty_register_driver+0x1b4/0x228 [cf82df20] [c0184d70] uart_register_driver+0x144/0x194 [cf82df40] [c030a378] ucc_uart_init+0x2c/0x94 [cf82df50] [c02f21a0] kernel_init+0x98/0x27c [cf82dff0] [c000fa74] kernel_thread+0x44/0x60 ^^ The board is using ucc_uart.c and 8250.c, both registered as "serial". This patch fixes two drivers that are using "serial" for driver_name and not "ttyS" for dev_name. Drivers that are using "ttyS" for dev_name, will conflict anyway, so we don't bother with these. Signed-off-by: Anton Vorontsov Acked-by: Alan Cox Acked-By: Timur Tabi Acked-by: Maciej W. Rozycki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/sb1250-duart.c | 2 +- drivers/serial/ucc_uart.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/sb1250-duart.c b/drivers/serial/sb1250-duart.c index 2d6c08b3dbc..f8e1447a022 100644 --- a/drivers/serial/sb1250-duart.c +++ b/drivers/serial/sb1250-duart.c @@ -924,7 +924,7 @@ console_initcall(sbd_serial_console_init); static struct uart_driver sbd_reg = { .owner = THIS_MODULE, - .driver_name = "serial", + .driver_name = "sb1250_duart", .dev_name = "duart", .major = TTY_MAJOR, .minor = SB1250_DUART_MINOR_BASE, diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c index 01917c433f1..566a8b42e05 100644 --- a/drivers/serial/ucc_uart.c +++ b/drivers/serial/ucc_uart.c @@ -195,7 +195,7 @@ struct uart_qe_port { static struct uart_driver ucc_uart_driver = { .owner = THIS_MODULE, - .driver_name = "serial", + .driver_name = "ucc_uart", .dev_name = "ttyQE", .major = SERIAL_QE_MAJOR, .minor = SERIAL_QE_MINOR, -- cgit v1.2.3 From f6266e34713dc286b52623d8a4ff846973c0bcce Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 5 Jun 2008 22:46:03 -0700 Subject: edd: fix incorrect return of 1 from module_init Signed-off-by: Alexey Dobriyan Cc: Matt Domsch Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/firmware/edd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c index 74401198904..9e4f59dc7f1 100644 --- a/drivers/firmware/edd.c +++ b/drivers/firmware/edd.c @@ -753,7 +753,7 @@ edd_init(void) if (!edd_num_devices()) { printk(KERN_INFO "EDD information not available.\n"); - return 1; + return -ENODEV; } edd_kset = kset_create_and_add("edd", NULL, firmware_kobj); -- cgit v1.2.3 From 33dda515a1995dfb3b6b57d7ace9b3ee9d449c11 Mon Sep 17 00:00:00 2001 From: "Roland.Kletzing" Date: Thu, 5 Jun 2008 22:46:04 -0700 Subject: drivers/char/ip2: fix Kconfig after ip2/ip2main merge As commit 6089093e588ee3f6aed99d08b1cf5ea37c52cf97 ("ip2: fix crashes on load/unload") fixed the ip2 crashes on load/unload by making ip2/ip2main one module (ip2), Kconfig shouldn't mention a now non-existing module. Signed-off-by: Roland.Kletzing Acked-by: Alan Cox Cc: Jiri Slaby Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 595a925c62a..d307bf26af5 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -118,8 +118,8 @@ config COMPUTONE order to become a dial-in server. If you have a card like that, say Y here and read . - To compile this driver as modules, choose M here: the - modules will be called ip2 and ip2main. + To compile this driver as module, choose M here: the + module will be called ip2. config ROCKETPORT tristate "Comtrol RocketPort support" -- cgit v1.2.3 From a361a82c10c20eff402d72ce83b66913d04894ee Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 5 Jun 2008 22:46:08 -0700 Subject: fujitsu-laptop: autoload module on Lifebook P1510D Signed-off-by: Dan Williams Cc: Jonathan Woithe Cc: Len Brown Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/fujitsu-laptop.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/misc/fujitsu-laptop.c b/drivers/misc/fujitsu-laptop.c index e2e7c05a147..6d14e8fe153 100644 --- a/drivers/misc/fujitsu-laptop.c +++ b/drivers/misc/fujitsu-laptop.c @@ -352,3 +352,9 @@ MODULE_AUTHOR("Jonathan Woithe"); MODULE_DESCRIPTION("Fujitsu laptop extras support"); MODULE_VERSION(FUJITSU_DRIVER_VERSION); MODULE_LICENSE("GPL"); + +static struct pnp_device_id pnp_ids[] = { + { .id = "FUJ02bf" }, + { .id = "" } +}; +MODULE_DEVICE_TABLE(pnp, pnp_ids); -- cgit v1.2.3 From 44d1b980c72db0faf35adb082fb2208351803028 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Thu, 5 Jun 2008 22:46:18 -0700 Subject: Fix various old email addresses for dwmw2 Although if people have questions about ARCnet, perhaps it's _better_ for them to be mailing dwmw2@cam.ac.uk about it... Signed-off-by: David Woodhouse Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mtd/redboot.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/redboot.c b/drivers/mtd/redboot.c index 47474903263..c5030f94f04 100644 --- a/drivers/mtd/redboot.c +++ b/drivers/mtd/redboot.c @@ -295,5 +295,5 @@ module_init(redboot_parser_init); module_exit(redboot_parser_exit); MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Red Hat, Inc. - David Woodhouse "); +MODULE_AUTHOR("David Woodhouse "); MODULE_DESCRIPTION("Parsing code for RedBoot Flash Image System (FIS) tables"); -- cgit v1.2.3 From f2eb432715a81a703e626df59347ba3557009557 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 5 Jun 2008 22:46:18 -0700 Subject: rtc-ds1374: rename device to just "ds1374" Change the name of the device from "rtc-ds1374" to just "ds1374", to match what all other RTC drivers do. I seem to remember that this name was chosen to avoid possible confusion with an older ds1374 driver, but that driver was removed 3 months ago. Signed-off-by: Jean Delvare Signed-off-by: Alessandro Zummo Acked-by: Kumar Gala Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/of/of_i2c.c | 1 - drivers/rtc/rtc-ds1374.c | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c index 715a4447161..b2ccdcbeb89 100644 --- a/drivers/of/of_i2c.c +++ b/drivers/of/of_i2c.c @@ -21,7 +21,6 @@ struct i2c_driver_device { }; static struct i2c_driver_device i2c_devices[] = { - { "dallas,ds1374", "rtc-ds1374" }, }; static int of_find_i2c_driver(struct device_node *node, diff --git a/drivers/rtc/rtc-ds1374.c b/drivers/rtc/rtc-ds1374.c index fa2d2f8b3f4..640acd20fdd 100644 --- a/drivers/rtc/rtc-ds1374.c +++ b/drivers/rtc/rtc-ds1374.c @@ -42,7 +42,7 @@ #define DS1374_REG_TCR 0x09 /* Trickle Charge */ static const struct i2c_device_id ds1374_id[] = { - { "rtc-ds1374", 0 }, + { "ds1374", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, ds1374_id); -- cgit v1.2.3 From 10732c35dff6c2e15e413e7806a7114a2faa0ecf Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Thu, 5 Jun 2008 22:46:33 -0700 Subject: fbcon: fix wrong vmode bits copied on console switch The interlaced and double line mode bits should not be copied to new console when the console is switched. Otherwise, the new console may be set to incorrect refresh rate. Also, the x and y offsets does not need to be copied. Signed-off-by: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/console/fbcon.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index 5fa8b76673c..97aff8db10b 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -2275,9 +2275,7 @@ static int fbcon_switch(struct vc_data *vc) * in fb_set_var() */ info->var.activate = var.activate; - var.yoffset = info->var.yoffset; - var.xoffset = info->var.xoffset; - var.vmode = info->var.vmode; + var.vmode |= info->var.vmode & ~FB_VMODE_MASK; fb_set_var(info, &var); ops->var = info->var; -- cgit v1.2.3 From 879000f94442860e72c934f9e568989bc7fb8ec4 Mon Sep 17 00:00:00 2001 From: CHIKAMA masaki Date: Thu, 5 Jun 2008 22:46:33 -0700 Subject: cpufreq: fix null object access on Transmeta CPU If cpu specific cpufreq driver(i.e. longrun) has "setpolicy" function, governor object isn't set into cpufreq_policy object at "__cpufreq_set_policy" function in driver/cpufreq/cpufreq.c . This causes a null object access at "store_scaling_setspeed" and "show_scaling_setspeed" function in driver/cpufreq/cpufreq.c when reading or writing through /sys interface (ex. cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed) Addresses: http://bugzilla.kernel.org/show_bug.cgi?id=10654 https://bugzilla.redhat.com/show_bug.cgi?id=443354 Signed-off-by: CHIKAMA Masaki Cc: Dave Jones Cc: Chuck Ebbert Acked-by: Dominik Brodowski Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/cpufreq/cpufreq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 86f0a243062..4e07d1f43a4 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -625,7 +625,7 @@ static ssize_t store_scaling_setspeed(struct cpufreq_policy *policy, unsigned int freq = 0; unsigned int ret; - if (!policy->governor->store_setspeed) + if (!policy->governor || !policy->governor->store_setspeed) return -EINVAL; ret = sscanf(buf, "%u", &freq); @@ -639,7 +639,7 @@ static ssize_t store_scaling_setspeed(struct cpufreq_policy *policy, static ssize_t show_scaling_setspeed(struct cpufreq_policy *policy, char *buf) { - if (!policy->governor->show_setspeed) + if (!policy->governor || !policy->governor->show_setspeed) return sprintf(buf, "\n"); return policy->governor->show_setspeed(policy, buf); -- cgit v1.2.3 From 774533b3e86fa52941c79aa80ab3f0cc511bba7f Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Thu, 5 Jun 2008 22:46:34 -0700 Subject: vt: fix background color on line feed, DEC invert Original report: """I used to force my console to black-on-white by the command `setterm -inversescreen on`. In 2.6.26-rc4, I get lots of black background characters.""" Another addendum to commit c9e587ab. This was previously missed out since I was not aware of what vc_decscnm was for. Signed-off-by: Jan Engelhardt Reported-by: Tested-by: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/vt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/vt.c b/drivers/char/vt.c index fa1ffbf2c62..b8b2498f57a 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -434,7 +434,7 @@ static void update_attr(struct vc_data *vc) vc->vc_blink, vc->vc_underline, vc->vc_reverse ^ vc->vc_decscnm, vc->vc_italic); vc->vc_video_erase_char = (build_attr(vc, vc->vc_color, 1, vc->vc_blink, 0, vc->vc_decscnm, 0) << 8) | ' '; - vc->vc_scrl_erase_char = (build_attr(vc, vc->vc_def_color, 1, false, false, false, false) << 8) | ' '; + vc->vc_scrl_erase_char = (build_attr(vc, vc->vc_def_color, 1, false, false, vc->vc_decscnm, false) << 8) | ' '; } /* Note: inverting the screen twice should revert to the original state */ -- cgit v1.2.3 From 81c6ce9bd3ed3a88caeb9ed97d874450d53339dc Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Thu, 5 Jun 2008 22:46:38 -0700 Subject: vt: fix vc_resize locking Lockdep says we can't take tasklist lock or sighand lock inside ctrl_lock. Signed-off-by: Nick Piggin Acked-by: Alan Cox Cc: Oleg Nesterov Cc: "Eric W. Biederman" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/vt.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/char/vt.c b/drivers/char/vt.c index b8b2498f57a..935f1c207a1 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -909,7 +909,7 @@ int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines) if (vc->vc_tty) { struct winsize ws, *cws = &vc->vc_tty->winsize; - unsigned long flags; + struct pid *pgrp = NULL; memset(&ws, 0, sizeof(ws)); ws.ws_row = vc->vc_rows; @@ -917,11 +917,14 @@ int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines) ws.ws_ypixel = vc->vc_scan_lines; mutex_lock(&vc->vc_tty->termios_mutex); - spin_lock_irqsave(&vc->vc_tty->ctrl_lock, flags); - if ((ws.ws_row != cws->ws_row || ws.ws_col != cws->ws_col) && - vc->vc_tty->pgrp) + spin_lock_irq(&vc->vc_tty->ctrl_lock); + if ((ws.ws_row != cws->ws_row || ws.ws_col != cws->ws_col)) + pgrp = get_pid(vc->vc_tty->pgrp); + spin_unlock_irq(&vc->vc_tty->ctrl_lock); + if (pgrp) { kill_pgrp(vc->vc_tty->pgrp, SIGWINCH, 1); - spin_unlock_irqrestore(&vc->vc_tty->ctrl_lock, flags); + put_pid(pgrp); + } *cws = ws; mutex_unlock(&vc->vc_tty->termios_mutex); } -- cgit v1.2.3 From 9c81c5c95c00c35a328e1757ca45a66647105f6c Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Thu, 5 Jun 2008 22:46:39 -0700 Subject: atmel_serial: filter out FP during baud rate detection I made a change to u-boot that used the FP (Fractional Part) field of BRGR to achieve more accurate baud rate generation. Unfortunately, the atmel_serial driver looks at the whole BRGR register when trying to detect the baud rate that the port is currently running at, so setting FP to a nonzero value breaks the baud rate detection. I'll sit on the u-boot patch for a while longer, but this is clearly a bug in the atmel_serial driver which should be fixed. Signed-off-by: Haavard Skinnemoen Acked-by: Andrew Victor Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/atmel_serial.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index c065a704a93..42be8b01a40 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -1318,7 +1318,7 @@ static void __init atmel_console_get_options(struct uart_port *port, int *baud, * If the baud rate generator isn't running, the port wasn't * initialized by the boot loader. */ - quot = UART_GET_BRGR(port); + quot = UART_GET_BRGR(port) & ATMEL_US_CD; if (!quot) return; -- cgit v1.2.3 From 659179b28f15ab1b1db5f8767090f5e728f115a1 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 5 Jun 2008 22:46:44 -0700 Subject: fbdev: export symbol fb_mode_option Frame buffer and mode setting drivers can be built as modules, so fb_mode_option needs to be exported to support these. Prevents this error: ERROR: "fb_mode_option" [drivers/ps3/ps3av_mod.ko] undefined! Signed-off-by: Geoff Levand Acked-by: Geert Uytterhoeven Cc: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/modedb.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c index d1bbef930df..d3c3af53a29 100644 --- a/drivers/video/modedb.c +++ b/drivers/video/modedb.c @@ -28,6 +28,7 @@ #endif const char *fb_mode_option; +EXPORT_SYMBOL_GPL(fb_mode_option); /* * Standard video mode definitions (taken from XFree86) -- cgit v1.2.3 From aabe188565124ee2ed060a072764d6ed34dfa4ed Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Thu, 5 Jun 2008 22:46:50 -0700 Subject: rtc: class driver for ppc_md RTC functions This hooks up the platform-specific [gs]et_rtc_time functions so that kernels using CONFIG_RTC_CLASS have RTC support on most PowerPC platforms. A new driver, and one which we've been shipping in Fedora for a while already, since otherwise RTC support breaks. [akpm@linux-foundation.org: fix Kconfig indenting] Signed-off-by: David Woodhouse Signed-off-by: Paul Mackerras Acked-by: Alessandro Zummo Acked-by: David Brownell Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/Kconfig | 8 ++++++ drivers/rtc/Makefile | 1 + drivers/rtc/rtc-ppc.c | 69 +++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 78 insertions(+) create mode 100644 drivers/rtc/rtc-ppc.c (limited to 'drivers') diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 6cc2c033023..60f8afc7a56 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -534,4 +534,12 @@ config RTC_DRV_RS5C313 help If you say yes here you get support for the Ricoh RS5C313 RTC chips. +config RTC_DRV_PPC + tristate "PowerPC machine dependent RTC support" + depends on PPC_MERGE + help + The PowerPC kernel has machine-specific functions for accessing + the RTC. This exposes that functionality through the generic RTC + class. + endif # RTC_CLASS diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 872f1218ff9..ebe871cf16c 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -54,3 +54,4 @@ obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o obj-$(CONFIG_RTC_DRV_V3020) += rtc-v3020.o obj-$(CONFIG_RTC_DRV_VR41XX) += rtc-vr41xx.o obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o +obj-$(CONFIG_RTC_DRV_PPC) += rtc-ppc.o diff --git a/drivers/rtc/rtc-ppc.c b/drivers/rtc/rtc-ppc.c new file mode 100644 index 00000000000..c8e97e25ef7 --- /dev/null +++ b/drivers/rtc/rtc-ppc.c @@ -0,0 +1,69 @@ +/* + * RTC driver for ppc_md RTC functions + * + * © 2007 Red Hat, Inc. + * + * Author: David Woodhouse + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + +#include +#include +#include +#include +#include + +static int ppc_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + ppc_md.get_rtc_time(tm); + return 0; +} + +static int ppc_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + return ppc_md.set_rtc_time(tm); +} + +static const struct rtc_class_ops ppc_rtc_ops = { + .set_time = ppc_rtc_set_time, + .read_time = ppc_rtc_read_time, +}; + +static struct rtc_device *rtc; +static struct platform_device *ppc_rtc_pdev; + +static int __init ppc_rtc_init(void) +{ + if (!ppc_md.get_rtc_time || !ppc_md.set_rtc_time) + return -ENODEV; + + ppc_rtc_pdev = platform_device_register_simple("ppc-rtc", 0, NULL, 0); + if (IS_ERR(ppc_rtc_pdev)) + return PTR_ERR(ppc_rtc_pdev); + + rtc = rtc_device_register("ppc_md", &ppc_rtc_pdev->dev, + &ppc_rtc_ops, THIS_MODULE); + if (IS_ERR(rtc)) { + platform_device_unregister(ppc_rtc_pdev); + return PTR_ERR(rtc); + } + + return 0; +} + +static void __exit ppc_rtc_exit(void) +{ + rtc_device_unregister(rtc); + platform_device_unregister(ppc_rtc_pdev); +} + +module_init(ppc_rtc_init); +module_exit(ppc_rtc_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Woodhouse "); +MODULE_DESCRIPTION("Generic RTC class driver for PowerPC"); -- cgit v1.2.3 From a4fa7ef037b17f2a3b9b393cb924e571fc04e784 Mon Sep 17 00:00:00 2001 From: Tim Gardner Date: Thu, 5 Jun 2008 22:46:55 -0700 Subject: hdaps: fix module loading on Thinkpad T61P Adds DMI system identifier for ThinkPad T61. Originally written by Klaus S. Madsen. Taken from http://launchpadlibrarian.net/10864950/hdaps-t61.patch Signed-off-by: Tim Gardner Signed-off-by: maximilian attems Cc: Klaus S. Madsen Cc: Mark M. Hoffman Cc: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/hwmon/hdaps.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/hwmon/hdaps.c b/drivers/hwmon/hdaps.c index 88e89653daa..26df06f840e 100644 --- a/drivers/hwmon/hdaps.c +++ b/drivers/hwmon/hdaps.c @@ -522,6 +522,7 @@ static struct dmi_system_id __initdata hdaps_whitelist[] = { HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T42"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T43"), HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T60"), + HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T61"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad X40"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad X41"), HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X60"), -- cgit v1.2.3 From eb4e545d4ac82d9018487edb4419b33b9930c857 Mon Sep 17 00:00:00 2001 From: David Sterba Date: Fri, 6 Jun 2008 10:56:35 +0200 Subject: ipwireless: Fix blocked sending Packet sending is driven by two flags, tx_ready and tx_queued. It was possible, that there were queued data for sending and hardware was flagged as blocked but in fact it was not. The tx_queued was indicator but should be really a counter else first fragmented packet resets tx_queued flag, but there may be pending packets which do not get sent. New semantics: tx_ready - set, if hw is ready to send packet, no packet is being transferred right now set the flag right at the place where data are copied into hw memory and not earlier without checking if it was succesful tx_queued - count of enqueued packets, including fragments Tested-by: Michal Rokos Signed-off-by: David Sterba Signed-off-by: Jiri Kosina Signed-off-by: Linus Torvalds --- drivers/char/pcmcia/ipwireless/hardware.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/char/pcmcia/ipwireless/hardware.c b/drivers/char/pcmcia/ipwireless/hardware.c index fa9d3c945f3..ba6340ae98a 100644 --- a/drivers/char/pcmcia/ipwireless/hardware.c +++ b/drivers/char/pcmcia/ipwireless/hardware.c @@ -251,10 +251,11 @@ struct ipw_hardware { int init_loops; struct timer_list setup_timer; + /* Flag if hw is ready to send next packet */ int tx_ready; - struct list_head tx_queue[NL_NUM_OF_PRIORITIES]; - /* True if any packets are queued for transmission */ + /* Count of pending packets to be sent */ int tx_queued; + struct list_head tx_queue[NL_NUM_OF_PRIORITIES]; int rx_bytes_queued; struct list_head rx_queue; @@ -404,6 +405,8 @@ static int do_send_fragment(struct ipw_hardware *hw, const unsigned char *data, spin_lock_irqsave(&hw->spinlock, flags); + hw->tx_ready = 0; + if (hw->hw_version == HW_VERSION_1) { outw((unsigned short) length, hw->base_port + IODWR); @@ -492,6 +495,7 @@ static int do_send_packet(struct ipw_hardware *hw, struct ipw_tx_packet *packet) spin_lock_irqsave(&hw->spinlock, flags); list_add(&packet->queue, &hw->tx_queue[0]); + hw->tx_queued++; spin_unlock_irqrestore(&hw->spinlock, flags); } else { if (packet->packet_callback) @@ -949,12 +953,10 @@ static int send_pending_packet(struct ipw_hardware *hw, int priority_limit) unsigned long flags; spin_lock_irqsave(&hw->spinlock, flags); - if (hw->tx_queued && hw->tx_ready != 0) { + if (hw->tx_queued && hw->tx_ready) { int priority; struct ipw_tx_packet *packet = NULL; - hw->tx_ready--; - /* Pick a packet */ for (priority = 0; priority < priority_limit; priority++) { if (!list_empty(&hw->tx_queue[priority])) { @@ -963,6 +965,7 @@ static int send_pending_packet(struct ipw_hardware *hw, int priority_limit) struct ipw_tx_packet, queue); + hw->tx_queued--; list_del(&packet->queue); break; @@ -973,6 +976,7 @@ static int send_pending_packet(struct ipw_hardware *hw, int priority_limit) spin_unlock_irqrestore(&hw->spinlock, flags); return 0; } + spin_unlock_irqrestore(&hw->spinlock, flags); /* Send */ @@ -1063,7 +1067,7 @@ static irqreturn_t ipwireless_handle_v1_interrupt(int irq, if (irqn & IR_TXINTR) { ack |= IR_TXINTR; spin_lock_irqsave(&hw->spinlock, flags); - hw->tx_ready++; + hw->tx_ready = 1; spin_unlock_irqrestore(&hw->spinlock, flags); } /* Received data */ @@ -1170,7 +1174,7 @@ static irqreturn_t ipwireless_handle_v2_v3_interrupt(int irq, if (memrxdone & MEMRX_RX_DONE) { writew(0, &hw->memory_info_regs->memreg_rx_done); spin_lock_irqsave(&hw->spinlock, flags); - hw->tx_ready++; + hw->tx_ready = 1; spin_unlock_irqrestore(&hw->spinlock, flags); tx = 1; } @@ -1234,7 +1238,7 @@ static void send_packet(struct ipw_hardware *hw, int priority, spin_lock_irqsave(&hw->spinlock, flags); list_add_tail(&packet->queue, &hw->tx_queue[priority]); - hw->tx_queued = 1; + hw->tx_queued++; spin_unlock_irqrestore(&hw->spinlock, flags); flush_packets_to_hw(hw); -- cgit v1.2.3 From 8079ffa0e18baaf2940e52e0c118eef420a473a4 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 6 Jun 2008 21:38:37 -0700 Subject: IB/umem: Avoid sign problems when demoting npages to integer On a 64-bit architecture, if ib_umem_get() is called with a size value that is so big that npages is negative when cast to int, then the length of the page list passed to get_user_pages(), namely min_t(int, npages, PAGE_SIZE / sizeof (struct page *)) will be negative, and get_user_pages() will immediately return 0 (at least since 900cf086, "Be more robust about bad arguments in get_user_pages()"). This leads to an infinite loop in ib_umem_get(), since the code boils down to: while (npages) { ret = get_user_pages(...); npages -= ret; } Fix this by taking the minimum as unsigned longs, so that the value of npages is never truncated. The impact of this bug isn't too severe, since the value of npages is checked against RLIMIT_MEMLOCK, so a process would need to have an astronomical limit or have CAP_IPC_LOCK to be able to trigger this, and such a process could already cause lots of mischief. But it does let buggy userspace code cause a kernel lock-up; for example I hit this with code that passes a negative value into a memory registartion function where it is promoted to a huge u64 value. Cc: Signed-off-by: Roland Dreier --- drivers/infiniband/core/umem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/umem.c b/drivers/infiniband/core/umem.c index fe78f7d2509..a1768dbb072 100644 --- a/drivers/infiniband/core/umem.c +++ b/drivers/infiniband/core/umem.c @@ -150,7 +150,7 @@ struct ib_umem *ib_umem_get(struct ib_ucontext *context, unsigned long addr, ret = 0; while (npages) { ret = get_user_pages(current, current->mm, cur_base, - min_t(int, npages, + min_t(unsigned long, npages, PAGE_SIZE / sizeof (struct page *)), 1, !umem->writable, page_list, vma_list); -- cgit v1.2.3 From 3b8458a9793a92a6ca3cb24e309f19821bf0d8e5 Mon Sep 17 00:00:00 2001 From: Graf Yang Date: Sat, 7 Jun 2008 15:36:33 +0800 Subject: Blackfin serial driver: fix up tty core set_ldisc API change breakage bug This is the patch that follows Linus's modification about set_ldisc. Graf has built and tested it on BF537 using Linus's git Tree. Signed-off-by: Graf Yang Signed-off-by: Bryan Wu --- drivers/serial/bfin_5xx.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 636b6876c6f..f20952c43cb 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -813,15 +813,15 @@ bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser) * Enable the IrDA function if tty->ldisc.num is N_IRDA. * In other cases, disable IrDA function. */ -static void bfin_set_ldisc(struct tty_struct *tty) +static void bfin_serial_set_ldisc(struct uart_port *port) { - int line = tty->index; + int line = port->line; unsigned short val; - if (line >= tty->driver->num) + if (line >= port->info->tty->driver->num) return; - switch (tty->ldisc.num) { + switch (port->info->tty->ldisc.num) { case N_IRDA: val = UART_GET_GCTL(&bfin_serial_ports[line]); val |= (IREN | RPOLC); @@ -846,6 +846,7 @@ static struct uart_ops bfin_serial_pops = { .startup = bfin_serial_startup, .shutdown = bfin_serial_shutdown, .set_termios = bfin_serial_set_termios, + .set_ldisc = bfin_serial_set_ldisc, .type = bfin_serial_type, .release_port = bfin_serial_release_port, .request_port = bfin_serial_request_port, @@ -1186,7 +1187,6 @@ static int __init bfin_serial_init(void) ret = uart_register_driver(&bfin_serial_reg); if (ret == 0) { - bfin_serial_reg.tty_driver->set_ldisc = bfin_set_ldisc; ret = platform_driver_register(&bfin_serial_driver); if (ret) { pr_debug("uart register failed\n"); -- cgit v1.2.3 From 60d5019be8acef268f4676d229c490186d338fbc Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Wed, 4 Jun 2008 08:31:28 +1000 Subject: [POWERPC] ehea: Remove dependency on MEMORY_HOTPLUG Now that walk_memory_resource() is available regardless of MEMORY_HOTPLUG's setting, this dependency is not needed. Signed-off-by: Nathan Lynch Acked-by: Jeff Garzik Acked-by: Yasunori Goto Signed-off-by: Paul Mackerras --- drivers/net/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index dd0ec9ebc93..f4182cfffe9 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2426,7 +2426,7 @@ config CHELSIO_T3 config EHEA tristate "eHEA Ethernet support" - depends on IBMEBUS && INET && SPARSEMEM && MEMORY_HOTPLUG + depends on IBMEBUS && INET && SPARSEMEM select INET_LRO ---help--- This driver supports the IBM pSeries eHEA ethernet adapter. -- cgit v1.2.3 From 77d11ba993bf1258f242b6a4ee0230aec8c6c8a4 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Mon, 9 Jun 2008 16:00:32 +0900 Subject: usb: r8a66597-hcd: Add support for SH7723 USB host R8A66597 is similar to SH7723 USB 2.0 Host/Function module. In addition, the USB of SH7366 is compatible with SH7723. It can support SH7723 USB host by changing Kconfig. Signed-off-by: Yoshihiro Shimoda Acked-by: Greg Kroah-Hartman Signed-off-by: Paul Mundt --- drivers/usb/host/Kconfig | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 1ef6df395e0..228797e54f9 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -300,8 +300,8 @@ config USB_R8A66597_HCD module will be called r8a66597-hcd. config SUPERH_ON_CHIP_R8A66597 - boolean "Enable SuperH on-chip USB like the R8A66597" - depends on USB_R8A66597_HCD && CPU_SUBTYPE_SH7366 + boolean "Enable SuperH on-chip R8A66597 USB" + depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723) help - Renesas SuperH processor has USB like the R8A66597. - This driver supported processor is SH7366. + This driver enables support for the on-chip R8A66597 in the + SH7366 and SH7723 processors. -- cgit v1.2.3 From 4c0283fc561d79a4f94ab48ec37282e15273d1f8 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 9 Jun 2008 09:58:42 -0700 Subject: IB/core: Remove IB_DEVICE_SEND_W_INV capability flag In 2.6.26, we added some support for send with invalidate work requests, including a device capability flag to indicate whether a device supports such requests. However, the support was incomplete: the completion structure was not extended with a field for the key contained in incoming send with invalidate requests. Full support for memory management extensions (send with invalidate, local invalidate, fast register through a send queue, etc) is planned for 2.6.27. Since send with invalidate is not very useful by itself, just remove the IB_DEVICE_SEND_W_INV bit before the 2.6.26 final release; we will add an IB_DEVICE_MEM_MGT_EXTENSIONS bit in 2.6.27, which makes things simpler for applications, since they will not have quite as confusing an array of fine-grained bits to check. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/amso1100/c2_rnic.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/amso1100/c2_rnic.c b/drivers/infiniband/hw/amso1100/c2_rnic.c index 9a054c6941a..b1441aeb60c 100644 --- a/drivers/infiniband/hw/amso1100/c2_rnic.c +++ b/drivers/infiniband/hw/amso1100/c2_rnic.c @@ -455,8 +455,7 @@ int __devinit c2_rnic_init(struct c2_dev *c2dev) IB_DEVICE_CURR_QP_STATE_MOD | IB_DEVICE_SYS_IMAGE_GUID | IB_DEVICE_ZERO_STAG | - IB_DEVICE_MEM_WINDOW | - IB_DEVICE_SEND_W_INV); + IB_DEVICE_MEM_WINDOW); /* Allocate the qptr_array */ c2dev->qptr_array = vmalloc(C2_MAX_CQS * sizeof(void *)); -- cgit v1.2.3 From 326f6a5c9c9e1a62aec37bdc0c3f8d53adabe77b Mon Sep 17 00:00:00 2001 From: Chris Wright Date: Fri, 6 Jun 2008 21:26:02 -0700 Subject: [CPUFREQ] Fix format string bug. Format string bug. Not exploitable, as this is only writable by root, but worth fixing all the same. Spotted-by: Ilja van Sprundel Signed-off-by: Dave Jones --- drivers/cpufreq/cpufreq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 86f0a243062..cc3baf10d2d 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -412,7 +412,7 @@ static int cpufreq_parse_governor(char *str_governor, unsigned int *policy, int ret; mutex_unlock(&cpufreq_governor_mutex); - ret = request_module(name); + ret = request_module("%s", name); mutex_lock(&cpufreq_governor_mutex); if (ret == 0) -- cgit v1.2.3 From ea177305b321a4127e448b88de20d5792682ace1 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 2 Jun 2008 17:51:23 -0400 Subject: ipw2200: queue direct scans When another scan is in progress, a direct scan gets dropped on the floor. However, that direct scan is usually the scan that's really needed by userspace, and gets stomped on by all the broadcast scans the ipw2200 driver issues internally. Make sure the direct scan happens eventually, and as a bonus ensure that the passive scan worker is cleaned up when appropriate. The change of request_passive_scan form a struct work to struct delayed_work is only to make the set_wx_scan() code a bit simpler, it's still only used with a delay of 0 to match previous behavior. Signed-off-by: Dan Williams Signed-off-by: John W. Linville --- drivers/net/wireless/ipw2200.c | 176 +++++++++++++++++++---------------------- drivers/net/wireless/ipw2200.h | 6 +- 2 files changed, 87 insertions(+), 95 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index 72933677482..6e704608947 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -1753,6 +1753,8 @@ static int ipw_radio_kill_sw(struct ipw_priv *priv, int disable_radio) if (priv->workqueue) { cancel_delayed_work(&priv->request_scan); + cancel_delayed_work(&priv->request_direct_scan); + cancel_delayed_work(&priv->request_passive_scan); cancel_delayed_work(&priv->scan_event); } queue_work(priv->workqueue, &priv->down); @@ -2005,6 +2007,8 @@ static void ipw_irq_tasklet(struct ipw_priv *priv) wake_up_interruptible(&priv->wait_command_queue); priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING); cancel_delayed_work(&priv->request_scan); + cancel_delayed_work(&priv->request_direct_scan); + cancel_delayed_work(&priv->request_passive_scan); cancel_delayed_work(&priv->scan_event); schedule_work(&priv->link_down); queue_delayed_work(priv->workqueue, &priv->rf_kill, 2 * HZ); @@ -4712,6 +4716,12 @@ static void ipw_rx_notification(struct ipw_priv *priv, priv->status &= ~STATUS_SCAN_FORCED; #endif /* CONFIG_IPW2200_MONITOR */ + /* Do queued direct scans first */ + if (priv->status & STATUS_DIRECT_SCAN_PENDING) { + queue_delayed_work(priv->workqueue, + &priv->request_direct_scan, 0); + } + if (!(priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING | STATUS_ROAMING | @@ -6267,7 +6277,7 @@ static void ipw_add_scan_channels(struct ipw_priv *priv, } } -static int ipw_request_scan_helper(struct ipw_priv *priv, int type) +static int ipw_request_scan_helper(struct ipw_priv *priv, int type, int direct) { struct ipw_scan_request_ext scan; int err = 0, scan_type; @@ -6278,22 +6288,31 @@ static int ipw_request_scan_helper(struct ipw_priv *priv, int type) mutex_lock(&priv->mutex); + if (direct && (priv->direct_scan_ssid_len == 0)) { + IPW_DEBUG_HC("Direct scan requested but no SSID to scan for\n"); + priv->status &= ~STATUS_DIRECT_SCAN_PENDING; + goto done; + } + if (priv->status & STATUS_SCANNING) { - IPW_DEBUG_HC("Concurrent scan requested. Ignoring.\n"); - priv->status |= STATUS_SCAN_PENDING; + IPW_DEBUG_HC("Concurrent scan requested. Queuing.\n"); + priv->status |= direct ? STATUS_DIRECT_SCAN_PENDING : + STATUS_SCAN_PENDING; goto done; } if (!(priv->status & STATUS_SCAN_FORCED) && priv->status & STATUS_SCAN_ABORTING) { IPW_DEBUG_HC("Scan request while abort pending. Queuing.\n"); - priv->status |= STATUS_SCAN_PENDING; + priv->status |= direct ? STATUS_DIRECT_SCAN_PENDING : + STATUS_SCAN_PENDING; goto done; } if (priv->status & STATUS_RF_KILL_MASK) { - IPW_DEBUG_HC("Aborting scan due to RF Kill activation\n"); - priv->status |= STATUS_SCAN_PENDING; + IPW_DEBUG_HC("Queuing scan due to RF Kill activation\n"); + priv->status |= direct ? STATUS_DIRECT_SCAN_PENDING : + STATUS_SCAN_PENDING; goto done; } @@ -6321,6 +6340,7 @@ static int ipw_request_scan_helper(struct ipw_priv *priv, int type) cpu_to_le16(20); scan.dwell_time[IPW_SCAN_PASSIVE_FULL_DWELL_SCAN] = cpu_to_le16(120); + scan.dwell_time[IPW_SCAN_ACTIVE_DIRECT_SCAN] = cpu_to_le16(20); #ifdef CONFIG_IPW2200_MONITOR if (priv->ieee->iw_mode == IW_MODE_MONITOR) { @@ -6360,13 +6380,23 @@ static int ipw_request_scan_helper(struct ipw_priv *priv, int type) cpu_to_le16(2000); } else { #endif /* CONFIG_IPW2200_MONITOR */ - /* If we are roaming, then make this a directed scan for the - * current network. Otherwise, ensure that every other scan - * is a fast channel hop scan */ - if ((priv->status & STATUS_ROAMING) - || (!(priv->status & STATUS_ASSOCIATED) - && (priv->config & CFG_STATIC_ESSID) - && (le32_to_cpu(scan.full_scan_index) % 2))) { + /* Honor direct scans first, otherwise if we are roaming make + * this a direct scan for the current network. Finally, + * ensure that every other scan is a fast channel hop scan */ + if (direct) { + err = ipw_send_ssid(priv, priv->direct_scan_ssid, + priv->direct_scan_ssid_len); + if (err) { + IPW_DEBUG_HC("Attempt to send SSID command " + "failed\n"); + goto done; + } + + scan_type = IPW_SCAN_ACTIVE_BROADCAST_AND_DIRECT_SCAN; + } else if ((priv->status & STATUS_ROAMING) + || (!(priv->status & STATUS_ASSOCIATED) + && (priv->config & CFG_STATIC_ESSID) + && (le32_to_cpu(scan.full_scan_index) % 2))) { err = ipw_send_ssid(priv, priv->essid, priv->essid_len); if (err) { IPW_DEBUG_HC("Attempt to send SSID command " @@ -6391,7 +6421,12 @@ send_request: } priv->status |= STATUS_SCANNING; - priv->status &= ~STATUS_SCAN_PENDING; + if (direct) { + priv->status &= ~STATUS_DIRECT_SCAN_PENDING; + priv->direct_scan_ssid_len = 0; + } else + priv->status &= ~STATUS_SCAN_PENDING; + queue_delayed_work(priv->workqueue, &priv->scan_check, IPW_SCAN_CHECK_WATCHDOG); done: @@ -6402,15 +6437,22 @@ done: static void ipw_request_passive_scan(struct work_struct *work) { struct ipw_priv *priv = - container_of(work, struct ipw_priv, request_passive_scan); - ipw_request_scan_helper(priv, IW_SCAN_TYPE_PASSIVE); + container_of(work, struct ipw_priv, request_passive_scan.work); + ipw_request_scan_helper(priv, IW_SCAN_TYPE_PASSIVE, 0); } static void ipw_request_scan(struct work_struct *work) { struct ipw_priv *priv = container_of(work, struct ipw_priv, request_scan.work); - ipw_request_scan_helper(priv, IW_SCAN_TYPE_ACTIVE); + ipw_request_scan_helper(priv, IW_SCAN_TYPE_ACTIVE, 0); +} + +static void ipw_request_direct_scan(struct work_struct *work) +{ + struct ipw_priv *priv = + container_of(work, struct ipw_priv, request_direct_scan.work); + ipw_request_scan_helper(priv, IW_SCAN_TYPE_ACTIVE, 1); } static void ipw_bg_abort_scan(struct work_struct *work) @@ -9477,99 +9519,38 @@ static int ipw_wx_get_retry(struct net_device *dev, return 0; } -static int ipw_request_direct_scan(struct ipw_priv *priv, char *essid, - int essid_len) -{ - struct ipw_scan_request_ext scan; - int err = 0, scan_type; - - if (!(priv->status & STATUS_INIT) || - (priv->status & STATUS_EXIT_PENDING)) - return 0; - - mutex_lock(&priv->mutex); - - if (priv->status & STATUS_RF_KILL_MASK) { - IPW_DEBUG_HC("Aborting scan due to RF kill activation\n"); - priv->status |= STATUS_SCAN_PENDING; - goto done; - } - - IPW_DEBUG_HC("starting request direct scan!\n"); - - if (priv->status & (STATUS_SCANNING | STATUS_SCAN_ABORTING)) { - /* We should not sleep here; otherwise we will block most - * of the system (for instance, we hold rtnl_lock when we - * get here). - */ - err = -EAGAIN; - goto done; - } - memset(&scan, 0, sizeof(scan)); - - if (priv->config & CFG_SPEED_SCAN) - scan.dwell_time[IPW_SCAN_ACTIVE_BROADCAST_SCAN] = - cpu_to_le16(30); - else - scan.dwell_time[IPW_SCAN_ACTIVE_BROADCAST_SCAN] = - cpu_to_le16(20); - - scan.dwell_time[IPW_SCAN_ACTIVE_BROADCAST_AND_DIRECT_SCAN] = - cpu_to_le16(20); - scan.dwell_time[IPW_SCAN_PASSIVE_FULL_DWELL_SCAN] = cpu_to_le16(120); - scan.dwell_time[IPW_SCAN_ACTIVE_DIRECT_SCAN] = cpu_to_le16(20); - - scan.full_scan_index = cpu_to_le32(ieee80211_get_scans(priv->ieee)); - - err = ipw_send_ssid(priv, essid, essid_len); - if (err) { - IPW_DEBUG_HC("Attempt to send SSID command failed\n"); - goto done; - } - scan_type = IPW_SCAN_ACTIVE_BROADCAST_AND_DIRECT_SCAN; - - ipw_add_scan_channels(priv, &scan, scan_type); - - err = ipw_send_scan_request_ext(priv, &scan); - if (err) { - IPW_DEBUG_HC("Sending scan command failed: %08X\n", err); - goto done; - } - - priv->status |= STATUS_SCANNING; - - done: - mutex_unlock(&priv->mutex); - return err; -} - static int ipw_wx_set_scan(struct net_device *dev, struct iw_request_info *info, union iwreq_data *wrqu, char *extra) { struct ipw_priv *priv = ieee80211_priv(dev); struct iw_scan_req *req = (struct iw_scan_req *)extra; + struct delayed_work *work = NULL; mutex_lock(&priv->mutex); + priv->user_requested_scan = 1; - mutex_unlock(&priv->mutex); if (wrqu->data.length == sizeof(struct iw_scan_req)) { if (wrqu->data.flags & IW_SCAN_THIS_ESSID) { - ipw_request_direct_scan(priv, req->essid, - req->essid_len); - return 0; - } - if (req->scan_type == IW_SCAN_TYPE_PASSIVE) { - queue_work(priv->workqueue, - &priv->request_passive_scan); - return 0; + int len = min((int)req->essid_len, + (int)sizeof(priv->direct_scan_ssid)); + memcpy(priv->direct_scan_ssid, req->essid, len); + priv->direct_scan_ssid_len = len; + work = &priv->request_direct_scan; + } else if (req->scan_type == IW_SCAN_TYPE_PASSIVE) { + work = &priv->request_passive_scan; } + } else { + /* Normal active broadcast scan */ + work = &priv->request_scan; } + mutex_unlock(&priv->mutex); + IPW_DEBUG_WX("Start scan\n"); - queue_delayed_work(priv->workqueue, &priv->request_scan, 0); + queue_delayed_work(priv->workqueue, work, 0); return 0; } @@ -10731,6 +10712,8 @@ static void ipw_link_up(struct ipw_priv *priv) } cancel_delayed_work(&priv->request_scan); + cancel_delayed_work(&priv->request_direct_scan); + cancel_delayed_work(&priv->request_passive_scan); cancel_delayed_work(&priv->scan_event); ipw_reset_stats(priv); /* Ensure the rate is updated immediately */ @@ -10761,6 +10744,8 @@ static void ipw_link_down(struct ipw_priv *priv) /* Cancel any queued work ... */ cancel_delayed_work(&priv->request_scan); + cancel_delayed_work(&priv->request_direct_scan); + cancel_delayed_work(&priv->request_passive_scan); cancel_delayed_work(&priv->adhoc_check); cancel_delayed_work(&priv->gather_stats); @@ -10800,8 +10785,9 @@ static int __devinit ipw_setup_deferred_work(struct ipw_priv *priv) INIT_WORK(&priv->up, ipw_bg_up); INIT_WORK(&priv->down, ipw_bg_down); INIT_DELAYED_WORK(&priv->request_scan, ipw_request_scan); + INIT_DELAYED_WORK(&priv->request_direct_scan, ipw_request_direct_scan); + INIT_DELAYED_WORK(&priv->request_passive_scan, ipw_request_passive_scan); INIT_DELAYED_WORK(&priv->scan_event, ipw_scan_event); - INIT_WORK(&priv->request_passive_scan, ipw_request_passive_scan); INIT_DELAYED_WORK(&priv->gather_stats, ipw_bg_gather_stats); INIT_WORK(&priv->abort_scan, ipw_bg_abort_scan); INIT_WORK(&priv->roam, ipw_bg_roam); @@ -11835,6 +11821,8 @@ static void __devexit ipw_pci_remove(struct pci_dev *pdev) cancel_delayed_work(&priv->adhoc_check); cancel_delayed_work(&priv->gather_stats); cancel_delayed_work(&priv->request_scan); + cancel_delayed_work(&priv->request_direct_scan); + cancel_delayed_work(&priv->request_passive_scan); cancel_delayed_work(&priv->scan_event); cancel_delayed_work(&priv->rf_kill); cancel_delayed_work(&priv->scan_check); diff --git a/drivers/net/wireless/ipw2200.h b/drivers/net/wireless/ipw2200.h index cd3295b66dd..d4ab28b73b3 100644 --- a/drivers/net/wireless/ipw2200.h +++ b/drivers/net/wireless/ipw2200.h @@ -1037,6 +1037,7 @@ struct ipw_cmd { /* XXX */ #define STATUS_DISASSOC_PENDING (1<<12) #define STATUS_STATE_PENDING (1<<13) +#define STATUS_DIRECT_SCAN_PENDING (1<<19) #define STATUS_SCAN_PENDING (1<<20) #define STATUS_SCANNING (1<<21) #define STATUS_SCAN_ABORTING (1<<22) @@ -1292,6 +1293,8 @@ struct ipw_priv { struct iw_public_data wireless_data; int user_requested_scan; + u8 direct_scan_ssid[IW_ESSID_MAX_SIZE]; + u8 direct_scan_ssid_len; struct workqueue_struct *workqueue; @@ -1301,8 +1304,9 @@ struct ipw_priv { struct work_struct system_config; struct work_struct rx_replenish; struct delayed_work request_scan; + struct delayed_work request_direct_scan; + struct delayed_work request_passive_scan; struct delayed_work scan_event; - struct work_struct request_passive_scan; struct work_struct adapter_restart; struct delayed_work rf_kill; struct work_struct up; -- cgit v1.2.3 From a01f5450401f081f07a866612121e780e0730cfd Mon Sep 17 00:00:00 2001 From: Holger Schurig Date: Wed, 4 Jun 2008 11:10:40 +0200 Subject: libertas: fix sleep confirmation This fixes an issus that made "iwconfig eth1 power on" non-working. When we get a "PS sleep" event, we have to confirm this to the firmware. The confirm happens with a command, but this command is special: the firmware won't send us a response. if_cs_host_to_card() is setting priv->dnld_sent anyway, so this variable stayed at DNLD_DATA_SENT and was never cleared back. Now I put the special knowledge that the CMD_802_11_PS_MODE with CMD_SUBCMD_SLEEP_CONFIRMED doesn't need to need a response by directly clearing the dnld_sent state in lbs_send_confirmsleep(). Signed-off-by: Holger Schurig Acked-by: Dan Williams Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/cmd.c | 5 ++++- drivers/net/wireless/libertas/main.c | 2 +- 2 files changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c index 6328b959387..8124fd9b135 100644 --- a/drivers/net/wireless/libertas/cmd.c +++ b/drivers/net/wireless/libertas/cmd.c @@ -1842,6 +1842,9 @@ static void lbs_send_confirmsleep(struct lbs_private *priv) spin_lock_irqsave(&priv->driver_lock, flags); + /* We don't get a response on the sleep-confirmation */ + priv->dnld_sent = DNLD_RES_RECEIVED; + /* If nothing to do, go back to sleep (?) */ if (!__kfifo_len(priv->event_fifo) && !priv->resp_len[priv->resp_idx]) priv->psstate = PS_STATE_SLEEP; @@ -1904,12 +1907,12 @@ void lbs_ps_confirm_sleep(struct lbs_private *priv) lbs_deb_enter(LBS_DEB_HOST); + spin_lock_irqsave(&priv->driver_lock, flags); if (priv->dnld_sent) { allowed = 0; lbs_deb_host("dnld_sent was set\n"); } - spin_lock_irqsave(&priv->driver_lock, flags); /* In-progress command? */ if (priv->cur_cmd) { allowed = 0; diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c index e1f06606859..acfc4bfcc26 100644 --- a/drivers/net/wireless/libertas/main.c +++ b/drivers/net/wireless/libertas/main.c @@ -732,8 +732,8 @@ static int lbs_thread(void *data) lbs_deb_thread("4: currenttxskb %p, dnld_sent %d\n", priv->currenttxskb, priv->dnld_sent); - spin_lock_irq(&priv->driver_lock); /* Process any pending command response */ + spin_lock_irq(&priv->driver_lock); resp_idx = priv->resp_idx; if (priv->resp_len[resp_idx]) { spin_unlock_irq(&priv->driver_lock); -- cgit v1.2.3 From d005b1d042a1d5dcd8d898f26d8d9bb03f865284 Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Thu, 5 Jun 2008 16:55:10 +0200 Subject: zd1211rw: Fix data padding for QoS This patch fixes a data alignment issue in the zd1211rw driver. The IEEE80211_STYPE_QOS_DATA bit should be used as a bitwise test to test for the presence of the 2 byte QoS control field. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/net/wireless/zd1211rw/zd_mac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index 6424e5a2c83..418606ac1c3 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -719,7 +719,7 @@ int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length) fc = le16_to_cpu(*((__le16 *) buffer)); is_qos = ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA) && - ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_QOS_DATA); + (fc & IEEE80211_STYPE_QOS_DATA); is_4addr = (fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) == (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS); need_padding = is_qos ^ is_4addr; -- cgit v1.2.3 From b6b16196b064bbff83e8161359f8b73465d4aa36 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Sun, 8 Jun 2008 13:13:06 +0200 Subject: iwlwifi: fix oops in iwl3945_led_brightness_set fix race between: ieee80211_open->ieee80211_led_radio->led_trigger_event->led_set_brightness->iwl3945_led_brightness_set (which assumes that "led->priv" is not NULL) and iwl3945_pci_probe->iwl3945_setup_deferred_work->(...)->iwl3945_bg_alive_start->iwl3945_alive_start->iwl3945_led_register->iwl3945_led_register_led which sets priv field in struct iwl3945_led after led->led_dev.brightness_set = iwl3945_led_brightness_set; (...) led_classdev_register(device, &led->led_dev); http://kerneloops.org/guilty.php?guilty=iwl3945_led_brightness_set&version=2.6.25-release&start=1671168&end=1703935&class=oops Signed-off-by: Marcin Slusarz Cc: Zhu Yi Cc: Reinette Chatre Cc: Tomas Winkler Cc: linux-wireless@vger.kernel.org Cc: ipw3945-devel@lists.sourceforge.net Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-3945-led.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-led.c b/drivers/net/wireless/iwlwifi/iwl-3945-led.c index d200d08fb08..8b1528e52d4 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-led.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945-led.c @@ -229,14 +229,15 @@ static int iwl3945_led_register_led(struct iwl3945_priv *priv, led->led_dev.brightness_set = iwl3945_led_brightness_set; led->led_dev.default_trigger = trigger; + led->priv = priv; + led->type = type; + ret = led_classdev_register(device, &led->led_dev); if (ret) { IWL_ERROR("Error: failed to register led handler.\n"); return ret; } - led->priv = priv; - led->type = type; led->registered = 1; if (set_led && led->led_on) -- cgit v1.2.3 From 56fa18e8f1ef6b3995a4511e61103d0f9205ff4a Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Sun, 8 Jun 2008 19:43:42 +0400 Subject: power_supply: Fix race in power_supply_uevent Commit 54d29ad33e3483bcc7ca433a21cf294854e5154a (Power Supply: fix race in device_create) introduced a race in power_supply_uevent. Previously it checked that power_supply is available by checking for dev->driver_data. But now dev->driver_data is set before power_supply->dev is initialised. Signed-off-by: Dmitry Baryshkov Signed-off-by: Anton Vorontsov --- drivers/power/power_supply_sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c index c444d6b10c5..49215da5249 100644 --- a/drivers/power/power_supply_sysfs.c +++ b/drivers/power/power_supply_sysfs.c @@ -201,7 +201,7 @@ int power_supply_uevent(struct device *dev, struct kobj_uevent_env *env) dev_dbg(dev, "uevent\n"); - if (!psy) { + if (!psy || !psy->dev) { dev_dbg(dev, "No power supply yet\n"); return ret; } -- cgit v1.2.3 From 2bd3ed0479c35f7c8dadecf72b725ca0c20ea015 Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Mon, 9 Jun 2008 15:39:55 -0700 Subject: tg3: Fix 5714S / 5715S / 5780S link failures The git commit ef167e27039eeaea6d3cdd5c547b082e89840bdd entitled "Fix supporting flowctrl code" introduced a bug that prevents 5714S, 5715S and 5780S devices from falling back to a forced link mode. The problem is that the added flow control check will always fail if flow control is set to autoneg and either RX or TX (or both) flow control is enabled. The driver defaults to setting flow control to autoneg and advertises both RX and TX flow control. The fix is to remove the errant check. Signed-off-by: Matt Carlson Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 07b3f77e762..4c248d79ee4 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -3168,8 +3168,7 @@ static int tg3_setup_fiber_mii_phy(struct tg3 *tp, int force_reset) err |= tg3_readphy(tp, MII_BMCR, &bmcr); if ((tp->link_config.autoneg == AUTONEG_ENABLE) && !force_reset && - (tp->tg3_flags2 & TG3_FLG2_PARALLEL_DETECT) && - tp->link_config.flowctrl == tp->link_config.active_flowctrl) { + (tp->tg3_flags2 & TG3_FLG2_PARALLEL_DETECT)) { /* do nothing, just check for link up at the end */ } else if (tp->link_config.autoneg == AUTONEG_ENABLE) { u32 adv, new_adv; -- cgit v1.2.3 From 0ba11fb307a4f18c11df6f5f255158ce055a2a16 Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Mon, 9 Jun 2008 15:40:26 -0700 Subject: tg3: Fix a flags typo This patch fixes a problem where the TG3_FLAG_10_100_ONLY flag was testing against the wrong flags variable. Signed-off-by: Matt Carlson Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 4c248d79ee4..c1293182943 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -8598,7 +8598,7 @@ static int tg3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) (cmd->speed == SPEED_1000)) return -EINVAL; else if ((cmd->speed == SPEED_1000) && - (tp->tg3_flags2 & TG3_FLAG_10_100_ONLY)) + (tp->tg3_flags & TG3_FLAG_10_100_ONLY)) return -EINVAL; tg3_full_lock(tp, 0); -- cgit v1.2.3 From 5f0c4a3cb6fda7c505f8c916b54ea90205feed68 Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Mon, 9 Jun 2008 15:41:12 -0700 Subject: tg3: Fix 5761 WOL On 5761 non-e devices, two problems prevent the administrator from overriding the WOL settings in the device's NVRAM. The first problem is that GPIO 0 and GPIO 2 have been swapped. This change prevented the administrator from turning on WOL when it is disabled in NVRAM. The fix is to add a new path for the 5761 that swaps the two GPIOs in the code as well. The second problem is that GPIO 1 could not be toggled by the driver because the GPIO is shared with the debug UART GPIO. This will prevent the administrator from being able to turn WOL off if it was enabled in NVRAM. The fix is to always disable the debug UART after a GRC reset. Signed-off-by: Matt Carlson Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'drivers') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index c1293182943..f8ce87344b2 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -1295,6 +1295,21 @@ static void tg3_frob_aux_power(struct tg3 *tp) GRC_LCLCTRL_GPIO_OUTPUT0 | GRC_LCLCTRL_GPIO_OUTPUT1), 100); + } else if (tp->pdev->device == PCI_DEVICE_ID_TIGON3_5761) { + /* The 5761 non-e device swaps GPIO 0 and GPIO 2. */ + u32 grc_local_ctrl = GRC_LCLCTRL_GPIO_OE0 | + GRC_LCLCTRL_GPIO_OE1 | + GRC_LCLCTRL_GPIO_OE2 | + GRC_LCLCTRL_GPIO_OUTPUT0 | + GRC_LCLCTRL_GPIO_OUTPUT1 | + tp->grc_local_ctrl; + tw32_wait_f(GRC_LOCAL_CTRL, grc_local_ctrl, 100); + + grc_local_ctrl |= GRC_LCLCTRL_GPIO_OUTPUT2; + tw32_wait_f(GRC_LOCAL_CTRL, grc_local_ctrl, 100); + + grc_local_ctrl &= ~GRC_LCLCTRL_GPIO_OUTPUT0; + tw32_wait_f(GRC_LOCAL_CTRL, grc_local_ctrl, 100); } else { u32 no_gpio2; u32 grc_local_ctrl = 0; @@ -11767,6 +11782,15 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755) tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_UART_SEL; + if (tp->pdev->device == PCI_DEVICE_ID_TIGON3_5761) { + /* Turn off the debug UART. */ + tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_UART_SEL; + if (tp->tg3_flags2 & TG3_FLG2_IS_NIC) + /* Keep VMain power. */ + tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_OE0 | + GRC_LCLCTRL_GPIO_OUTPUT0; + } + /* Force the chip into D0. */ err = tg3_set_power_state(tp, PCI_D0); if (err) { -- cgit v1.2.3 From 1b84d9462a93ccfa99f725aad744ab4d1af8402b Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Mon, 9 Jun 2008 15:41:33 -0700 Subject: tg3: Update version to 3.92.1 This patch increments the version to 3.92.1. Signed-off-by: Matt Carlson Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index f8ce87344b2..cc4bde85254 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -64,8 +64,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.92" -#define DRV_MODULE_RELDATE "May 2, 2008" +#define DRV_MODULE_VERSION "3.92.1" +#define DRV_MODULE_RELDATE "June 9, 2008" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 -- cgit v1.2.3 From 1420a4faee7086b6811b4a1f0672e32b5a6df80e Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 9 Jun 2008 15:47:38 -0700 Subject: irda: net/irda build fix: mcs7780 -tip testing found the following build error: drivers/built-in.o: In function `mcs_receive_irq': mcs7780.c:(.text+0x4e429): undefined reference to `crc32_le' drivers/built-in.o: In function `mcs_hard_xmit': mcs7780.c:(.text+0x4e9af): undefined reference to `crc32_le' with: http://redhat.com/~mingo/misc/config-Sun_Jun__8_22_56_14_CEST_2008.bad the reason is a missing enablement of the CRC32 library in the Kconfig. Signed-off-by: Ingo Molnar Signed-off-by: Samuel Ortiz Signed-off-by: David S. Miller --- drivers/net/irda/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig index ce816ba9c40..e6317557a53 100644 --- a/drivers/net/irda/Kconfig +++ b/drivers/net/irda/Kconfig @@ -329,6 +329,7 @@ config PXA_FICP config MCS_FIR tristate "MosChip MCS7780 IrDA-USB dongle" depends on IRDA && USB && EXPERIMENTAL + select CRC32 help Say Y or M here if you want to build support for the MosChip MCS7780 IrDA-USB bridge device driver. -- cgit v1.2.3 From 12829126aa47758608578cc5be3a5adffc3d4b09 Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Tue, 10 Jun 2008 10:03:19 +0200 Subject: [S390] cio: Fix sparse warnings in blacklist.c. sparse complains about signedness: drivers/s390/cio/blacklist.c:132:28: warning: incorrect type in argument 2 (different signedness) drivers/s390/cio/blacklist.c:132:28: expected unsigned int *val drivers/s390/cio/blacklist.c:132:28: got int *cssid drivers/s390/cio/blacklist.c:136:28: warning: incorrect type in argument 2 (different signedness) drivers/s390/cio/blacklist.c:136:28: expected unsigned int *val drivers/s390/cio/blacklist.c:136:28: got int *ssid drivers/s390/cio/blacklist.c:140:28: warning: incorrect type in argument 2 (different signedness) drivers/s390/cio/blacklist.c:140:28: expected unsigned int *val drivers/s390/cio/blacklist.c:140:28: got int *devno cssid, ssid and devno are of course unsigned, so let's make the variables unsigned as well. Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/blacklist.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/cio/blacklist.c b/drivers/s390/cio/blacklist.c index a4a5f2efea4..0bfcbbe375c 100644 --- a/drivers/s390/cio/blacklist.c +++ b/drivers/s390/cio/blacklist.c @@ -97,8 +97,8 @@ static int pure_hex(char **cp, unsigned int *val, int min_digit, return 0; } -static int parse_busid(char *str, int *cssid, int *ssid, int *devno, - int msgtrigger) +static int parse_busid(char *str, unsigned int *cssid, unsigned int *ssid, + unsigned int *devno, int msgtrigger) { char *str_work; int val, rc, ret; @@ -148,7 +148,7 @@ out: static int blacklist_parse_parameters(char *str, range_action action, int msgtrigger) { - int from_cssid, to_cssid, from_ssid, to_ssid, from, to; + unsigned int from_cssid, to_cssid, from_ssid, to_ssid, from, to; int rc, totalrc; char *parm; range_action ra; -- cgit v1.2.3 From 85b0d7c0ad92c47887bf6aeb424a14e7af14bd87 Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Tue, 10 Jun 2008 10:03:21 +0200 Subject: [S390] cio: Fix inverted isc priorities. Priorities for I/O interruption subclasses range from 0 (highest) to 7 (lowest). Unfortunately, the console has been using isc 7 instead of an isc with a higher priority than regular I/O subchannels (which use 3). Fix this by making the console use isc 1. Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/cio.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c index 82c6a2d4512..b32d7eb3d81 100644 --- a/drivers/s390/cio/cio.c +++ b/drivers/s390/cio/cio.c @@ -576,12 +576,14 @@ cio_validate_subchannel (struct subchannel *sch, struct subchannel_id schid) err = -ENODEV; goto out; } - if (cio_is_console(sch->schid)) + if (cio_is_console(sch->schid)) { sch->opm = 0xff; - else + sch->isc = 1; + } else { sch->opm = chp_get_sch_opm(sch); + sch->isc = 3; + } sch->lpm = sch->schib.pmcw.pam & sch->opm; - sch->isc = 3; CIO_MSG_EVENT(6, "Detected device %04x on subchannel 0.%x.%04X " "- PIM = %02X, PAM = %02X, POM = %02X\n", @@ -704,9 +706,9 @@ void wait_cons_dev(void) if (!console_subchannel_in_use) return; - /* disable all but isc 7 (console device) */ + /* disable all but isc 1 (console device) */ __ctl_store (save_cr6, 6, 6); - cr6 = 0x01000000; + cr6 = 0x40000000; __ctl_load (cr6, 6, 6); do { @@ -788,11 +790,11 @@ cio_probe_console(void) } /* - * enable console I/O-interrupt subclass 7 + * enable console I/O-interrupt subclass 1 */ - ctl_set_bit(6, 24); - console_subchannel.isc = 7; - console_subchannel.schib.pmcw.isc = 7; + ctl_set_bit(6, 30); + console_subchannel.isc = 1; + console_subchannel.schib.pmcw.isc = 1; console_subchannel.schib.pmcw.intparm = (u32)(addr_t)&console_subchannel; ret = cio_modify(&console_subchannel); -- cgit v1.2.3 From 7b439d25300dc59bba76b53eb344bb9e5a1133f2 Mon Sep 17 00:00:00 2001 From: Carsten Otte Date: Tue, 10 Jun 2008 10:03:22 +0200 Subject: [S390] vt220 console, initialize list head before use This patch fixes a null pointer dereference during initialisation when no sclp event facility is available: sclp vt220 tty driver: could not register vt220 - sclp_register returned -5 Unable to handle kernel paging request at virtual user address 0000000000000000 Oops: 0004 [#1] PREEMPT SMP Modules linked in: CPU: 0 Not tainted 2.6.26-rc3-kvm-bigiron-00968-gd939e93-dirty #30 Process swapper (pid: 0, task: 0000000000600be0, ksp: 000000000064a000) Krnl PSW : 0400000180000000 0000000000320d8c (sclp_unregister+0x48/0x8c) R:0 T:1 IO:0 EX:0 Key:0 M:0 W:0 P:0 AS:0 CC:0 PM:0 EA:3 Krnl GPRS: 0000000000000000 0000000000000000 0000000000630478 0700000000649c20 0000000000000000 0000000000433060 000000000064a660 0000000002e26000 00000000006db000 0000000000000000 0000000000a78578 0000000000649b80 0000000000630dc0 000000000044fa20 0000000000320d76 0000000000649b80 Krnl Code: 0000000000320d7c: e310c0080004 lg %r1,8(%r12) 0000000000320d82: b9040032 lgr %r3,%r2 0000000000320d86: c02000187b79 larl %r2,630478 >0000000000320d8c: e34010000024 stg %r4,0(%r1) 0000000000320d92: e31040080024 stg %r1,8(%r4) 0000000000320d98: c01100200200 lgfi %r1,2097664 0000000000320d9e: e310c0080024 stg %r1,8(%r12) 0000000000320da4: c01100100100 lgfi %r1,1048832 Call Trace: ([<0000000000320d76>] sclp_unregister+0x32/0x8c) [<00000000006657b4>] __sclp_vt220_cleanup+0xc4/0xe0 [<000000000066595c>] __sclp_vt220_init+0x18c/0x1a0 [<0000000000665aba>] sclp_vt220_con_init+0x42/0x68 [<00000000006601ca>] console_init+0x4e/0x68 [<000000000064acae>] start_kernel+0x3a2/0x4dc [<0000000000100020>] _stext+0x20/0x80 INFO: lockdep is turned off. Last Breaking-Event-Address: [<000000000041f964>] _spin_lock_irqsave+0xb0/0xb4 <4>---[ end trace 31fd0ba7d8756001 ]--- The issue is caused by a list_empty() check in __sclp_vt220_cleanup, which usually fails on non-initialized list heads that contain {NULL,NULL} instead. Signed-off-by: Carsten Otte Signed-off-by: Martin Schwidefsky --- drivers/s390/char/sclp_vt220.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/s390/char/sclp_vt220.c b/drivers/s390/char/sclp_vt220.c index 62576af36f4..3e577f655b1 100644 --- a/drivers/s390/char/sclp_vt220.c +++ b/drivers/s390/char/sclp_vt220.c @@ -773,6 +773,7 @@ sclp_vt220_con_init(void) { int rc; + INIT_LIST_HEAD(&sclp_vt220_register.list); if (!CONSOLE_IS_SCLP) return 0; rc = __sclp_vt220_init(); -- cgit v1.2.3 From 1783e60ff207805a3e75cf522b17ec9bb1604a62 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 10 Jun 2008 10:03:25 +0200 Subject: [S390] tape_3590.c: introduce missing kfree The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) @r exists@ expression E,E1; statement S; position p1,p2,p3; @@ E =@p1 \(kmalloc\|kcalloc\|kzalloc\)(...) ... when != E = E1 if (E == NULL || ...) S ... when != E = E1 if@p2 (...) { ... when != kfree(E) } ... when != E = E1 kfree@p3(E); @forall@ position r.p2; expression r.E; int E1 != 0; @@ * if@p2 (...) { ... when != kfree(E) when strict return E1; } Signed-off-by: Julia Lawall Signed-off-by: Martin Schwidefsky --- drivers/s390/char/tape_3590.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c index 8246ef3ab09..42ce7915fc5 100644 --- a/drivers/s390/char/tape_3590.c +++ b/drivers/s390/char/tape_3590.c @@ -1598,7 +1598,7 @@ tape_3590_setup_device(struct tape_device *device) rc = tape_3590_read_dev_chars(device, rdc_data); if (rc) { DBF_LH(3, "Read device characteristics failed!\n"); - goto fail_kmalloc; + goto fail_rdc_data; } rc = tape_std_assign(device); if (rc) -- cgit v1.2.3 From b76916462d990751882eaeadc75ac8c487d6de1d Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 10 Jun 2008 20:56:36 +0200 Subject: ide: remove the ide_etrax100 chipset type I forgot to remove the ide_etrax100 chipset type when removing the ETRAX_IDE driver. Reported-by: Bartlomiej Zolnierkiewicz Signed-off-by: Adrian Bunk Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 5 ++--- drivers/ide/ide-proc.c | 1 - 2 files changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 655ec7ef568..0bccb63d10a 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1333,8 +1333,7 @@ static void ide_port_init_devices(ide_hwif_t *hwif) static void ide_init_port(ide_hwif_t *hwif, unsigned int port, const struct ide_port_info *d) { - if (d->chipset != ide_etrax100) - hwif->channel = port; + hwif->channel = port; if (d->chipset) hwif->chipset = d->chipset; @@ -1519,7 +1518,7 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d) continue; } - if (d->chipset != ide_etrax100 && (i & 1) && mate) { + if ((i & 1) && mate) { hwif->mate = mate; mate->mate = hwif; } diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index 8d6ad812a01..55ec7f79877 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -63,7 +63,6 @@ static int proc_ide_read_imodel case ide_pmac: name = "mac-io"; break; case ide_au1xxx: name = "au1xxx"; break; case ide_palm3710: name = "palm3710"; break; - case ide_etrax100: name = "etrax100"; break; case ide_acorn: name = "acorn"; break; default: name = "(unknown)"; break; } -- cgit v1.2.3 From cd18f69f845dc8c769f0ef65046b7a113b8aba87 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 10 Jun 2008 20:56:36 +0200 Subject: sis5513: add missing pci_enable_device() call Cc: Riccardo Gori Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/sis5513.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c index 4b0b85d8faf..e127eb25ab6 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/pci/sis5513.c @@ -569,6 +569,11 @@ static int __devinit sis5513_init_one(struct pci_dev *dev, const struct pci_devi { struct ide_port_info d = sis5513_chipset; u8 udma_rates[] = { 0x00, 0x00, 0x07, 0x1f, 0x3f, 0x3f, 0x7f, 0x7f }; + int rc; + + rc = pci_enable_device(dev); + if (rc) + return rc; if (sis_find_family(dev) == 0) return -ENOTSUPP; -- cgit v1.2.3 From 343a3451e20314d5959b59b992e33fbaadfe52bf Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 10 Jun 2008 20:56:36 +0200 Subject: ide-generic: add missing hwif->chipset setup hwif->chipset need to be set properly or ide-generic driver will break once we make a final step in fixing host drivers' dependence on ide_hwifs[]. Problem was catched early thanks to IDE tree exposure in -mm / -next trees and reported by people listed people (thank you guys!). Reported-by: "John Keller" Reported-by: Dmitri Vorobiev Reported-by: Mel Gorman Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-generic.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c index a6073e248f4..9134488ac04 100644 --- a/drivers/ide/ide-generic.c +++ b/drivers/ide/ide-generic.c @@ -125,6 +125,7 @@ static int __init ide_generic_init(void) memset(&hw, 0, sizeof(hw)); ide_std_init_ports(&hw, io_addr, io_addr + 0x206); hw.irq = ide_default_irq(io_addr); + hw.chipset = ide_generic; ide_init_port_hw(hwif, &hw); idx[i] = i; -- cgit v1.2.3 From d427e836d1d9b58e8f1e648c09b5fbe36e01013b Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 10 Jun 2008 20:56:37 +0200 Subject: ide: fix host drivers missing hwif->chipset initialization ide_find_port() now depends on ->chipset being set for occupied ide_hwifs[] slots so all host drivers have to initialize hwif->chipset properly. This patch fixes a regression on hosts with > 1 port or with a single port but no devices attached to it for an affected host drivers. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/arm/bast-ide.c | 1 + drivers/ide/arm/ide_arm.c | 1 + drivers/ide/ide-pnp.c | 1 + drivers/ide/ide-probe.c | 1 + drivers/ide/legacy/buddha.c | 2 ++ drivers/ide/legacy/falconide.c | 2 ++ drivers/ide/legacy/gayle.c | 2 ++ drivers/ide/legacy/macide.c | 2 ++ drivers/ide/legacy/q40ide.c | 2 ++ drivers/ide/pci/cmd640.c | 2 ++ drivers/ide/ppc/mpc8xx.c | 4 ++++ 11 files changed, 20 insertions(+) (limited to 'drivers') diff --git a/drivers/ide/arm/bast-ide.c b/drivers/ide/arm/bast-ide.c index 713cef20622..8e8c28104b4 100644 --- a/drivers/ide/arm/bast-ide.c +++ b/drivers/ide/arm/bast-ide.c @@ -42,6 +42,7 @@ static int __init bastide_register(unsigned int base, unsigned int aux, int irq) hw.io_ports.ctl_addr = aux + (6 * 0x20); hw.irq = irq; + hw.chipset = ide_generic; hwif = ide_find_port(); if (hwif == NULL) diff --git a/drivers/ide/arm/ide_arm.c b/drivers/ide/arm/ide_arm.c index 4263ffd4ab2..2f311da4c96 100644 --- a/drivers/ide/arm/ide_arm.c +++ b/drivers/ide/arm/ide_arm.c @@ -49,6 +49,7 @@ static int __init ide_arm_init(void) memset(&hw, 0, sizeof(hw)); ide_std_init_ports(&hw, base, ctl); hw.irq = IDE_ARM_IRQ; + hw.chipset = ide_generic; hwif = ide_find_port(); if (hwif) { diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c index 6a8953f68e9..adbd0178416 100644 --- a/drivers/ide/ide-pnp.c +++ b/drivers/ide/ide-pnp.c @@ -55,6 +55,7 @@ static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) memset(&hw, 0, sizeof(hw)); ide_std_init_ports(&hw, base, ctl); hw.irq = pnp_irq(dev, 0); + hw.chipset = ide_generic; hwif = ide_find_port(); if (hwif) { diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 0bccb63d10a..380fa0c8cc8 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1664,6 +1664,7 @@ static void ide_legacy_init_one(u8 *idx, hw_regs_t *hw, u8 port_no, ide_std_init_ports(hw, base, ctl); hw->irq = irq; + hw->chipset = d->chipset; hwif = ide_find_port_slot(d); if (hwif) { diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/legacy/buddha.c index 5c730e4dd73..9a1d27ef3f8 100644 --- a/drivers/ide/legacy/buddha.c +++ b/drivers/ide/legacy/buddha.c @@ -138,6 +138,8 @@ static void __init buddha_setup_ports(hw_regs_t *hw, unsigned long base, hw->irq = IRQ_AMIGA_PORTS; hw->ack_intr = ack_intr; + + hw->chipset = ide_generic; } /* diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c index 9e449a0c623..af11028b479 100644 --- a/drivers/ide/legacy/falconide.c +++ b/drivers/ide/legacy/falconide.c @@ -81,6 +81,8 @@ static void __init falconide_setup_ports(hw_regs_t *hw) hw->irq = IRQ_MFP_IDE; hw->ack_intr = NULL; + + hw->chipset = ide_generic; } /* diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c index a9c2593a898..eb15ca61970 100644 --- a/drivers/ide/legacy/gayle.c +++ b/drivers/ide/legacy/gayle.c @@ -112,6 +112,8 @@ static void __init gayle_setup_ports(hw_regs_t *hw, unsigned long base, hw->irq = IRQ_AMIGA_PORTS; hw->ack_intr = ack_intr; + + hw->chipset = ide_generic; } /* diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c index caa2632dd08..2e84290d0bc 100644 --- a/drivers/ide/legacy/macide.c +++ b/drivers/ide/legacy/macide.c @@ -78,6 +78,8 @@ static void __init macide_setup_ports(hw_regs_t *hw, unsigned long base, hw->irq = irq; hw->ack_intr = ack_intr; + + hw->chipset = ide_generic; } static const char *mac_ide_name[] = diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c index 6f535d00e63..8ff6e2d2083 100644 --- a/drivers/ide/legacy/q40ide.c +++ b/drivers/ide/legacy/q40ide.c @@ -70,6 +70,8 @@ static void q40_ide_setup_ports(hw_regs_t *hw, unsigned long base, hw->irq = irq; hw->ack_intr = ack_intr; + + hw->chipset = ide_generic; } static void q40ide_input_data(ide_drive_t *drive, struct request *rq, diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c index aaf38109eae..b38a1980dcd 100644 --- a/drivers/ide/pci/cmd640.c +++ b/drivers/ide/pci/cmd640.c @@ -747,9 +747,11 @@ static int __init cmd640x_init(void) ide_std_init_ports(&hw[0], 0x1f0, 0x3f6); hw[0].irq = 14; + hw[0].chipset = ide_cmd640; ide_std_init_ports(&hw[1], 0x170, 0x376); hw[1].irq = 15; + hw[1].chipset = ide_cmd640; printk(KERN_INFO "cmd640: buggy cmd640%c interface on %s, config=0x%02x" "\n", 'a' + cmd640_chip_version - 1, bus_type, cfr); diff --git a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c index f0e638dcc3a..236f9c38e51 100644 --- a/drivers/ide/ppc/mpc8xx.c +++ b/drivers/ide/ppc/mpc8xx.c @@ -303,6 +303,8 @@ static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port) pcmp->pcmc_per = 0x100000 >> (16 * _slot_); #endif /* CONFIG_IDE_8xx_PCCARD */ + hw->chipset = ide_generic; + return 0; } #endif /* CONFIG_IDE_8xx_PCCARD || CONFIG_IDE_8xx_DIRECT */ @@ -377,6 +379,8 @@ static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port) ((immap_t *) IMAP_ADDR)->im_siu_conf.sc_siel |= (0x80000000 >> ioport_dsc[data_port].irq); + hw->chipset = ide_generic; + return 0; } #endif /* CONFIG_IDE_8xx_DIRECT */ -- cgit v1.2.3 From 8a7dbb9761d59996e4a037c969eabd8e93f3be1c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 10 Jun 2008 20:56:37 +0200 Subject: delkin_cb: set proper hwif->gendev.parent value hwif->dev was set too late (after ide_device_add() call) so hwif->gendev.parent was not initialized properly. Fix it by setting hw.dev and letting ide_init_port_hw() do the rest. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/delkin_cb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c index b9e457996d0..5cf59333ef3 100644 --- a/drivers/ide/pci/delkin_cb.c +++ b/drivers/ide/pci/delkin_cb.c @@ -79,6 +79,7 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) memset(&hw, 0, sizeof(hw)); ide_std_init_ports(&hw, base + 0x10, base + 0x1e); hw.irq = dev->irq; + hw.dev = &dev->dev; hw.chipset = ide_pci; /* this enables IRQ sharing */ hwif = ide_find_port(); @@ -99,7 +100,7 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) goto out_disable; pci_set_drvdata(dev, hwif); - hwif->dev = &dev->dev; + drive = &hwif->drives[0]; if (drive->present) { drive->io_32bit = 1; -- cgit v1.2.3 From 1c4d4ad50ac5cc74c605c4a467db42c961ec7a69 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 10 Jun 2008 20:56:37 +0200 Subject: delkin_cb: use struct ide_port_info Convert the driver to use struct ide_port_info - as a nice side-effect this fixes racy setup of ->io_32bit/unmask settings (after ide_device_add() call device can be already in use). Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/delkin_cb.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c index 5cf59333ef3..1b69e4dd552 100644 --- a/drivers/ide/pci/delkin_cb.c +++ b/drivers/ide/pci/delkin_cb.c @@ -47,13 +47,18 @@ static const struct ide_port_ops delkin_cb_port_ops = { .quirkproc = ide_undecoded_slave, }; +static const struct ide_port_info delkin_cb_port_info = { + .port_ops = &delkin_cb_port_ops, + .host_flags = IDE_HFLAG_IO_32BIT | IDE_HFLAG_UNMASK_IRQS | + IDE_HFLAG_NO_DMA, +}; + static int __devinit delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) { unsigned long base; hw_regs_t hw; ide_hwif_t *hwif = NULL; - ide_drive_t *drive; int i, rc; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; @@ -90,22 +95,16 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) ide_init_port_data(hwif, i); ide_init_port_hw(hwif, &hw); - hwif->port_ops = &delkin_cb_port_ops; idx[0] = i; - ide_device_add(idx, NULL); + ide_device_add(idx, &delkin_cb_port_info); if (!hwif->present) goto out_disable; pci_set_drvdata(dev, hwif); - drive = &hwif->drives[0]; - if (drive->present) { - drive->io_32bit = 1; - drive->unmask = 1; - } return 0; out_disable: -- cgit v1.2.3 From 96fe439ec9ca25b09e1458d86bd739757ae11ea1 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 10 Jun 2008 20:56:38 +0200 Subject: delkin_cb: add warm-plug support Don't fail the probe if there are no devices attached to the controller. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/delkin_cb.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c index 1b69e4dd552..538f8045d41 100644 --- a/drivers/ide/pci/delkin_cb.c +++ b/drivers/ide/pci/delkin_cb.c @@ -100,15 +100,11 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) ide_device_add(idx, &delkin_cb_port_info); - if (!hwif->present) - goto out_disable; - pci_set_drvdata(dev, hwif); return 0; out_disable: - printk(KERN_ERR "delkin_cb: no IDE devices found\n"); pci_release_regions(dev); pci_disable_device(dev); return -ENODEV; -- cgit v1.2.3 From f4084a1d18d618bb360bc72713a3bc2b8375e12f Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 10 Jun 2008 20:56:38 +0200 Subject: delkin_cb: add missing __init/__exit tags Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/delkin_cb.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c index 538f8045d41..af0f30051d5 100644 --- a/drivers/ide/pci/delkin_cb.c +++ b/drivers/ide/pci/delkin_cb.c @@ -135,14 +135,12 @@ static struct pci_driver driver = { .remove = delkin_cb_remove, }; -static int -delkin_cb_init (void) +static int __init delkin_cb_init(void) { return pci_register_driver(&driver); } -static void -delkin_cb_exit (void) +static void __exit delkin_cb_exit(void) { pci_unregister_driver(&driver); } -- cgit v1.2.3 From fb374966ba13ccac341499eaefecd58a96bafb59 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 10 Jun 2008 20:56:38 +0200 Subject: palm_bk3710: add warm-plug support Don't fail the probe if there are no devices attached to the controller. Cc: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/arm/palm_bk3710.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c index 96378ebfb31..d024ac8fad1 100644 --- a/drivers/ide/arm/palm_bk3710.c +++ b/drivers/ide/arm/palm_bk3710.c @@ -409,9 +409,6 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev) ide_device_add(idx, &palm_bk3710_port_info); - if (!hwif->present) - goto out; - return 0; out: printk(KERN_WARNING "Palm Chip BK3710 IDE Register Fail\n"); -- cgit v1.2.3 From 513f3c10ddb24b0a261ae96de6f7911ba28713f9 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 10 Jun 2008 20:56:38 +0200 Subject: ide: export ide_doubler This patch fixes the following build error: <-- snip --> ... Building modules, stage 2. MODPOST 1204 modules ERROR: "ide_doubler" [drivers/ide/ide-core.ko] undefined! ... make[2]: *** [__modpost] Error 1 <-- snip --> Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/legacy/gayle.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c index eb15ca61970..fed7d812761 100644 --- a/drivers/ide/legacy/gayle.c +++ b/drivers/ide/legacy/gayle.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include @@ -62,7 +63,10 @@ GAYLE_NUM_HWIFS-1) #define GAYLE_HAS_CONTROL_REG (!ide_doubler) #define GAYLE_IDEREG_SIZE (ide_doubler ? 0x1000 : 0x2000) + int ide_doubler = 0; /* support IDE doublers? */ +EXPORT_SYMBOL_GPL(ide_doubler); + module_param_named(doubler, ide_doubler, bool, 0); MODULE_PARM_DESC(doubler, "enable support for IDE doublers"); #endif /* CONFIG_BLK_DEV_IDEDOUBLER */ -- cgit v1.2.3 From efc0fc1c2f37c8c0e43c7616394a979a042b9331 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 10 Jun 2008 20:56:38 +0200 Subject: fix BLK_DEV_HD_ONLY on ARM dependencies This patch limits BLK_DEV_HD_ONLY to the ARM platforms offering IRQ_HARDDISK, fixing the following compile error on others: <-- snip --> ... CC drivers/ide/legacy/hd.o ... /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c: In function 'hd_times_out': /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c:542: error: 'IRQ_HARDDISK' undeclared (first use in this function) /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c:542: error: (Each undeclared identifier is reported only once /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c:542: error: for each function it appears in.) /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c: In function 'do_hd_request': /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c:661: error: 'IRQ_HARDDISK' undeclared (first use in this function) /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c: In function 'hd_init': /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c:765: error: 'IRQ_HARDDISK' undeclared (first use in this function) make[3]: *** [drivers/ide/legacy/hd.o] Error 1 <-- snip --> Reported-by: Adrian Bunk Cc: Russell King Signed-off-by: Adrian Bunk Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index b4f3aefa12b..1607536ff5f 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -1028,6 +1028,7 @@ endif config BLK_DEV_HD_ONLY bool "Old hard disk (MFM/RLL/IDE) driver" + depends on !ARM || ARCH_RPC || ARCH_SHARK || BROKEN help There are two drivers for MFM/RLL/IDE hard disks. Most people use the newer enhanced driver, but this old one is still around for two -- cgit v1.2.3 From 6b6707a50c7598a83820077393f8823ab791abf8 Mon Sep 17 00:00:00 2001 From: James Chapman Date: Tue, 10 Jun 2008 12:35:00 -0700 Subject: l2tp: Fix potential memory corruption in pppol2tp_recvmsg() This patch fixes a potential memory corruption in pppol2tp_recvmsg(). If skb->len is bigger than the caller's buffer length, memcpy_toiovec() will go into unintialized data on the kernel heap, interpret it as an iovec and start modifying memory. The fix is to change the memcpy_toiovec() call to skb_copy_datagram_iovec() so that paged packets (rare for PPPOL2TP) are handled properly. Also check that the caller's buffer is big enough for the data and set the MSG_TRUNC flag if it is not so. Reported-by: Ilja Signed-off-by: James Chapman Signed-off-by: David S. Miller --- drivers/net/pppol2tp.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c index 70cfdb46aa2..f9298827a76 100644 --- a/drivers/net/pppol2tp.c +++ b/drivers/net/pppol2tp.c @@ -783,14 +783,18 @@ static int pppol2tp_recvmsg(struct kiocb *iocb, struct socket *sock, err = 0; skb = skb_recv_datagram(sk, flags & ~MSG_DONTWAIT, flags & MSG_DONTWAIT, &err); - if (skb) { - err = memcpy_toiovec(msg->msg_iov, (unsigned char *) skb->data, - skb->len); - if (err < 0) - goto do_skb_free; - err = skb->len; - } -do_skb_free: + if (!skb) + goto end; + + if (len > skb->len) + len = skb->len; + else if (len < skb->len) + msg->msg_flags |= MSG_TRUNC; + + err = skb_copy_datagram_iovec(skb, 0, msg->msg_iov, len); + if (likely(err == 0)) + err = len; + kfree_skb(skb); end: return err; -- cgit v1.2.3 From b36ffc47a17ab5ce6d9589a99ac5d135c9173a9a Mon Sep 17 00:00:00 2001 From: Pradeep Singh Rautela Date: Tue, 10 Jun 2008 12:46:52 -0700 Subject: drivers/atm/eni.h: remove unused macro KERNEL_OFFSET KERNEL_OFFSET macro in eni.h is not required as it is not used anywhere. Remove the unused macro from eni.h header file. Signed-off-by: Pradeep Singh Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/atm/eni.h | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/atm/eni.h b/drivers/atm/eni.h index d04fefb0841..e4c9525e60b 100644 --- a/drivers/atm/eni.h +++ b/drivers/atm/eni.h @@ -18,7 +18,6 @@ #include "midway.h" -#define KERNEL_OFFSET 0xC0000000 /* kernel 0x0 is at phys 0xC0000000 */ #define DEV_LABEL "eni" #define UBR_BUFFER (128*1024) /* UBR buffer size */ -- cgit v1.2.3 From 495b36b15e17fb08434e3800959434f06a1a6fbc Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Tue, 10 Jun 2008 12:49:31 -0700 Subject: isdn divas: fix proc creation 1. creating proc entry and not saving pointer to PDE and checking it is not going to work. 2. if proc entry wasn't created, no reason to remove it on error path. Signed-off-by: Alexey Dobriyan Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/isdn/hardware/eicon/divasmain.c | 1 - drivers/isdn/hardware/eicon/divasproc.c | 4 ++-- 2 files changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/isdn/hardware/eicon/divasmain.c b/drivers/isdn/hardware/eicon/divasmain.c index 5fcbdccd7a5..16a874bb156 100644 --- a/drivers/isdn/hardware/eicon/divasmain.c +++ b/drivers/isdn/hardware/eicon/divasmain.c @@ -806,7 +806,6 @@ static int DIVA_INIT_FUNCTION divas_init(void) if (!create_divas_proc()) { #ifdef MODULE - remove_divas_proc(); divas_unregister_chrdev(); divasfunc_exit(); #endif diff --git a/drivers/isdn/hardware/eicon/divasproc.c b/drivers/isdn/hardware/eicon/divasproc.c index fae895828a1..040827288ec 100644 --- a/drivers/isdn/hardware/eicon/divasproc.c +++ b/drivers/isdn/hardware/eicon/divasproc.c @@ -125,8 +125,8 @@ static const struct file_operations divas_fops = { int create_divas_proc(void) { - proc_create(divas_proc_name, S_IFREG | S_IRUGO, proc_net_eicon, - &divas_fops); + divas_proc_entry = proc_create(divas_proc_name, S_IFREG | S_IRUGO, + proc_net_eicon, &divas_fops); if (!divas_proc_entry) return (0); -- cgit v1.2.3 From ea23ec26727b4df97b4965715f0519b6ddc0aa4b Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Tue, 10 Jun 2008 12:50:14 -0700 Subject: isdn: use simple_read_from_buffer() Signed-off-by: Akinobu Mita Acked-by: Karsten Keil Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/isdn/hysdn/hysdn_procconf.c | 29 ++++++++--------------------- 1 file changed, 8 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/isdn/hysdn/hysdn_procconf.c b/drivers/isdn/hysdn/hysdn_procconf.c index 15906d005b0..484299b031f 100644 --- a/drivers/isdn/hysdn/hysdn_procconf.c +++ b/drivers/isdn/hysdn/hysdn_procconf.c @@ -207,30 +207,17 @@ hysdn_conf_write(struct file *file, const char __user *buf, size_t count, loff_t /* read conf file -> output card info data */ /*******************************************/ static ssize_t -hysdn_conf_read(struct file *file, char __user *buf, size_t count, loff_t * off) +hysdn_conf_read(struct file *file, char __user *buf, size_t count, loff_t *off) { char *cp; - int i; - if (file->f_mode & FMODE_READ) { - if (!(cp = file->private_data)) - return (-EFAULT); /* should never happen */ - i = strlen(cp); /* get total string length */ - if (*off < i) { - /* still bytes to transfer */ - cp += *off; /* point to desired data offset */ - i -= *off; /* remaining length */ - if (i > count) - i = count; /* limit length to transfer */ - if (copy_to_user(buf, cp, i)) - return (-EFAULT); /* copy error */ - *off += i; /* adjust offset */ - } else - return (0); - } else - return (-EPERM); /* no permission to read */ - - return (i); + if (!(file->f_mode & FMODE_READ)) + return -EPERM; /* no permission to read */ + + if (!(cp = file->private_data)) + return -EFAULT; /* should never happen */ + + return simple_read_from_buffer(buf, count, off, cp, strlen(cp)); } /* hysdn_conf_read */ /******************/ -- cgit v1.2.3 From 392fdb0e35055b96faa9c1cd6ab537805337cdce Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 10 Jun 2008 14:07:25 -0700 Subject: net pppoe: Check packet length on all receive paths The length field in the PPPOE header wasn't checked completely. This patch causes all packets shorter than the declared length to be dropped. It also changes the memcpy_toiovec call to skb_copy_datagram_iovec so that paged packets (rare for PPPOE) are handled properly. Thanks to Ilja of the Netric Security Team for discovering and reporting this bug, and Chris Wright for the total_len check. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- drivers/net/pppoe.c | 31 +++++++++++++++++-------------- 1 file changed, 17 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c index 58a26a47af2..d89ccfd6650 100644 --- a/drivers/net/pppoe.c +++ b/drivers/net/pppoe.c @@ -341,12 +341,6 @@ static int pppoe_rcv_core(struct sock *sk, struct sk_buff *skb) struct pppox_sock *relay_po; if (sk->sk_state & PPPOX_BOUND) { - struct pppoe_hdr *ph = pppoe_hdr(skb); - int len = ntohs(ph->length); - skb_pull_rcsum(skb, sizeof(struct pppoe_hdr)); - if (pskb_trim_rcsum(skb, len)) - goto abort_kfree; - ppp_input(&po->chan, skb); } else if (sk->sk_state & PPPOX_RELAY) { relay_po = get_item_by_addr(&po->pppoe_relay); @@ -357,7 +351,6 @@ static int pppoe_rcv_core(struct sock *sk, struct sk_buff *skb) if ((sk_pppox(relay_po)->sk_state & PPPOX_CONNECTED) == 0) goto abort_put; - skb_pull(skb, sizeof(struct pppoe_hdr)); if (!__pppoe_xmit(sk_pppox(relay_po), skb)) goto abort_put; } else { @@ -388,6 +381,7 @@ static int pppoe_rcv(struct sk_buff *skb, { struct pppoe_hdr *ph; struct pppox_sock *po; + int len; if (!(skb = skb_share_check(skb, GFP_ATOMIC))) goto out; @@ -399,10 +393,21 @@ static int pppoe_rcv(struct sk_buff *skb, goto drop; ph = pppoe_hdr(skb); + len = ntohs(ph->length); + + skb_pull_rcsum(skb, sizeof(*ph)); + if (skb->len < len) + goto drop; po = get_item(ph->sid, eth_hdr(skb)->h_source, dev->ifindex); - if (po != NULL) - return sk_receive_skb(sk_pppox(po), skb, 0); + if (!po) + goto drop; + + if (pskb_trim_rcsum(skb, len)) + goto drop; + + return sk_receive_skb(sk_pppox(po), skb, 0); + drop: kfree_skb(skb); out: @@ -937,12 +942,10 @@ static int pppoe_recvmsg(struct kiocb *iocb, struct socket *sock, m->msg_namelen = 0; if (skb) { - struct pppoe_hdr *ph = pppoe_hdr(skb); - const int len = ntohs(ph->length); - - error = memcpy_toiovec(m->msg_iov, (unsigned char *) &ph->tag[0], len); + total_len = min(total_len, skb->len); + error = skb_copy_datagram_iovec(skb, 0, m->msg_iov, total_len); if (error == 0) - error = len; + error = total_len; } kfree_skb(skb); -- cgit v1.2.3 From bc6cffd177f9266af38dba96a2cea06c1e7ff932 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 10 Jun 2008 14:08:25 -0700 Subject: pppoe: Unshare skb before anything else We need to unshare the skb first as otherwise pskb_may_pull may write to a shared skb which could be bad. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- drivers/net/pppoe.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c index d89ccfd6650..bafb69b6f7c 100644 --- a/drivers/net/pppoe.c +++ b/drivers/net/pppoe.c @@ -432,12 +432,12 @@ static int pppoe_disc_rcv(struct sk_buff *skb, if (dev_net(dev) != &init_net) goto abort; - if (!pskb_may_pull(skb, sizeof(struct pppoe_hdr))) - goto abort; - if (!(skb = skb_share_check(skb, GFP_ATOMIC))) goto out; + if (!pskb_may_pull(skb, sizeof(struct pppoe_hdr))) + goto abort; + ph = pppoe_hdr(skb); if (ph->code != PADT_CODE) goto abort; -- cgit v1.2.3 From 738eca74d1bd3e51180de179b7b74d4e34c4e5a3 Mon Sep 17 00:00:00 2001 From: Robert Reif Date: Tue, 10 Jun 2008 14:13:09 -0700 Subject: sparc: get leo framebuffer working This patch fixes several issues: Use the right openprom device name so the driver is actually loaded. Fix a crash due to unitialized info->pseudo_palette. Put the framebuffer in the proper mode for software rendering. checkpatch cleanups. Hardware acceleration was removed when the driver was rewritten for the new framebuffer API in 2003. Software rendering requires a different framebuffer access mode but that wasn't changed. The driver now works again but is slow. The proper fix is to reintroduce hardware acceleration. Signed-off-by: Robert Reif Signed-off-by: David S. Miller --- drivers/video/leo.c | 58 ++++++++++++++++++++++++----------------------------- 1 file changed, 26 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/drivers/video/leo.c b/drivers/video/leo.c index 8bc46e93034..13fea61d6ae 100644 --- a/drivers/video/leo.c +++ b/drivers/video/leo.c @@ -17,8 +17,8 @@ #include #include #include +#include -#include #include #include "sbuslib.h" @@ -33,7 +33,6 @@ static int leo_blank(int, struct fb_info *); static int leo_mmap(struct fb_info *, struct vm_area_struct *); static int leo_ioctl(struct fb_info *, unsigned int, unsigned long); -static int leo_pan_display(struct fb_var_screeninfo *, struct fb_info *); /* * Frame buffer operations @@ -43,7 +42,6 @@ static struct fb_ops leo_ops = { .owner = THIS_MODULE, .fb_setcolreg = leo_setcolreg, .fb_blank = leo_blank, - .fb_pan_display = leo_pan_display, .fb_fillrect = cfb_fillrect, .fb_copyarea = cfb_copyarea, .fb_imageblit = cfb_imageblit, @@ -78,7 +76,7 @@ static struct fb_ops leo_ops = { #define LEO_CUR_TYPE_CMAP 0x00000050 struct leo_cursor { - u8 xxx0[16]; + u8 xxx0[16]; u32 cur_type; u32 cur_misc; u32 cur_cursxy; @@ -105,7 +103,7 @@ struct leo_lx_krn { struct leo_lc_ss0_krn { u32 misc; - u8 xxx0[0x800-4]; + u8 xxx0[0x800-4]; u32 rev; }; @@ -116,7 +114,7 @@ struct leo_lc_ss0_usr { u32 fontt; u32 extent; u32 src; - u32 dst; + u32 dst; u32 copy; u32 fill; }; @@ -129,8 +127,8 @@ struct leo_lc_ss1_usr { u8 unknown; }; -struct leo_ld { - u8 xxx0[0xe00]; +struct leo_ld_ss0 { + u8 xxx0[0xe00]; u32 csr; u32 wid; u32 wmask; @@ -144,13 +142,13 @@ struct leo_ld { u32 src; /* Copy/Scroll (SS0 only) */ u32 dst; /* Copy/Scroll/Fill (SS0 only) */ u32 extent; /* Copy/Scroll/Fill size (SS0 only) */ - u32 xxx1[3]; + u32 xxx1[3]; u32 setsem; /* SS1 only */ u32 clrsem; /* SS1 only */ u32 clrpick; /* SS1 only */ u32 clrdat; /* SS1 only */ u32 alpha; /* SS1 only */ - u8 xxx2[0x2c]; + u8 xxx2[0x2c]; u32 winbg; u32 planemask; u32 rop; @@ -199,11 +197,12 @@ struct leo_par { static void leo_wait(struct leo_lx_krn __iomem *lx_krn) { int i; - + for (i = 0; - (sbus_readl(&lx_krn->krn_csr) & LEO_KRN_CSR_PROGRESS) && i < 300000; + (sbus_readl(&lx_krn->krn_csr) & LEO_KRN_CSR_PROGRESS) && + i < 300000; i++) - udelay (1); /* Busy wait at most 0.3 sec */ + udelay(1); /* Busy wait at most 0.3 sec */ return; } @@ -221,7 +220,7 @@ static int leo_setcolreg(unsigned regno, unsigned transp, struct fb_info *info) { struct leo_par *par = (struct leo_par *) info->par; - struct leo_lx_krn __iomem *lx_krn = par->lx_krn; + struct leo_lx_krn __iomem *lx_krn = par->lx_krn; unsigned long flags; u32 val; int i; @@ -408,7 +407,7 @@ static void leo_wid_put(struct fb_info *info, struct fb_wid_list *wl) leo_wait(lx_krn); for (i = 0, wi = wl->wl_list; i < wl->wl_count; i++, wi++) { - switch(wi->wi_type) { + switch (wi->wi_type) { case FB_WID_DBL_8: j = (wi->wi_index & 0xf) + 0x40; break; @@ -453,13 +452,12 @@ static void leo_init_wids(struct fb_info *info) wi.wi_index = 1; wi.wi_values [0] = 0x30; leo_wid_put(info, &wl); - } static void leo_switch_from_graph(struct fb_info *info) { struct leo_par *par = (struct leo_par *) info->par; - struct leo_ld __iomem *ss = (struct leo_ld __iomem *) par->ld_ss0; + struct leo_ld_ss0 __iomem *ss = par->ld_ss0; unsigned long flags; u32 val; @@ -485,19 +483,13 @@ static void leo_switch_from_graph(struct fb_info *info) val = sbus_readl(&par->lc_ss0_usr->csr); } while (val & 0x20000000); - spin_unlock_irqrestore(&par->lock, flags); -} - -static int leo_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) -{ - /* We just use this to catch switches out of - * graphics mode. - */ - leo_switch_from_graph(info); + /* setup screen buffer for cfb_* functions */ + sbus_writel(1, &ss->wid); + sbus_writel(0x00ffffff, &ss->planemask); + sbus_writel(0x310b90, &ss->rop); + sbus_writel(0, &par->lc_ss0_usr->addrspace); - if (var->xoffset || var->yoffset || var->vmode) - return -EINVAL; - return 0; + spin_unlock_irqrestore(&par->lock, flags); } static void leo_init_hw(struct fb_info *info) @@ -542,7 +534,8 @@ static void leo_unmap_regs(struct of_device *op, struct fb_info *info, of_iounmap(&op->resource[0], info->screen_base, 0x800000); } -static int __devinit leo_probe(struct of_device *op, const struct of_device_id *match) +static int __devinit leo_probe(struct of_device *op, + const struct of_device_id *match) { struct device_node *dp = op->node; struct fb_info *info; @@ -594,8 +587,9 @@ static int __devinit leo_probe(struct of_device *op, const struct of_device_id * !info->screen_base) goto out_unmap_regs; - info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN; + info->flags = FBINFO_DEFAULT; info->fbops = &leo_ops; + info->pseudo_palette = par->clut_data; leo_init_wids(info); leo_init_hw(info); @@ -649,7 +643,7 @@ static int __devexit leo_remove(struct of_device *op) static struct of_device_id leo_match[] = { { - .name = "leo", + .name = "SUNW,leo", }, {}, }; -- cgit v1.2.3 From 4db0ee176e256444695ee2d7b004552e82fec987 Mon Sep 17 00:00:00 2001 From: Ayaz Abdulla Date: Mon, 9 Jun 2008 16:51:06 -0700 Subject: forcedeth: msi interrupts Add a workaround for lost MSI interrupts. There is a race condition in the HW in which future interrupts could be missed. The workaround is to toggle the MSI irq mask. Added cleanup based on comments from Andrew Morton. Signed-off-by: Ayaz Abdulla Cc: Manfred Spraul Cc: Jeff Garzik Cc: Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/forcedeth.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'drivers') diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 9eca97fb0a5..2cb24476329 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -3273,6 +3273,20 @@ static void nv_link_irq(struct net_device *dev) dprintk(KERN_DEBUG "%s: link change notification done.\n", dev->name); } +static void nv_msi_workaround(struct fe_priv *np) +{ + + /* Need to toggle the msi irq mask within the ethernet device, + * otherwise, future interrupts will not be detected. + */ + if (np->msi_flags & NV_MSI_ENABLED) { + u8 __iomem *base = np->base; + + writel(0, base + NvRegMSIIrqMask); + writel(NVREG_MSI_VECTOR_0_ENABLED, base + NvRegMSIIrqMask); + } +} + static irqreturn_t nv_nic_irq(int foo, void *data) { struct net_device *dev = (struct net_device *) data; @@ -3295,6 +3309,8 @@ static irqreturn_t nv_nic_irq(int foo, void *data) if (!(events & np->irqmask)) break; + nv_msi_workaround(np); + spin_lock(&np->lock); nv_tx_done(dev); spin_unlock(&np->lock); @@ -3410,6 +3426,8 @@ static irqreturn_t nv_nic_irq_optimized(int foo, void *data) if (!(events & np->irqmask)) break; + nv_msi_workaround(np); + spin_lock(&np->lock); nv_tx_done_optimized(dev, TX_WORK_PER_LOOP); spin_unlock(&np->lock); @@ -3750,6 +3768,8 @@ static irqreturn_t nv_nic_irq_test(int foo, void *data) if (!(events & NVREG_IRQ_TIMER)) return IRQ_RETVAL(0); + nv_msi_workaround(np); + spin_lock(&np->lock); np->intr_test = 1; spin_unlock(&np->lock); -- cgit v1.2.3 From ff68cdbf86f09e602eb2b04e1a7d448a3c3a3b28 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Mon, 9 Jun 2008 15:57:17 -0700 Subject: ixgbe: fix typo Define names were accidently transposed. Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik --- drivers/net/ixgbe/ixgbe_82598.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c index 6321b059ce1..2f38e847e2c 100644 --- a/drivers/net/ixgbe/ixgbe_82598.c +++ b/drivers/net/ixgbe/ixgbe_82598.c @@ -58,8 +58,8 @@ static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw); static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw) { - hw->mac.num_rx_queues = IXGBE_82598_MAX_TX_QUEUES; - hw->mac.num_tx_queues = IXGBE_82598_MAX_RX_QUEUES; + hw->mac.num_rx_queues = IXGBE_82598_MAX_RX_QUEUES; + hw->mac.num_tx_queues = IXGBE_82598_MAX_TX_QUEUES; hw->mac.num_rx_addrs = IXGBE_82598_RAR_ENTRIES; /* PHY ops are filled in by default properly for Fiber only */ -- cgit v1.2.3 From bf4d593479e0a3f349118f9b8c40a6bc37bf1e2e Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 10 Jun 2008 01:22:16 +0300 Subject: add missing lance_* exports This patch fixes the following build error: <-- snip --> ... Building modules, stage 2. MODPOST 1203 modules ERROR: "lance_open" [drivers/net/mvme147.ko] undefined! ERROR: "lance_close" [drivers/net/mvme147.ko] undefined! ERROR: "lance_tx_timeout" [drivers/net/mvme147.ko] undefined! ERROR: "lance_set_multicast" [drivers/net/mvme147.ko] undefined! ERROR: "lance_start_xmit" [drivers/net/mvme147.ko] undefined! ... make[2]: *** [__modpost] Error 1 <-- snip --> Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Signed-off-by: Jeff Garzik --- drivers/net/7990.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/7990.c b/drivers/net/7990.c index 750a46f4bc5..ad6b8a5b657 100644 --- a/drivers/net/7990.c +++ b/drivers/net/7990.c @@ -506,6 +506,7 @@ int lance_open (struct net_device *dev) return res; } +EXPORT_SYMBOL_GPL(lance_open); int lance_close (struct net_device *dev) { @@ -521,6 +522,7 @@ int lance_close (struct net_device *dev) return 0; } +EXPORT_SYMBOL_GPL(lance_close); void lance_tx_timeout(struct net_device *dev) { @@ -529,7 +531,7 @@ void lance_tx_timeout(struct net_device *dev) dev->trans_start = jiffies; netif_wake_queue (dev); } - +EXPORT_SYMBOL_GPL(lance_tx_timeout); int lance_start_xmit (struct sk_buff *skb, struct net_device *dev) { @@ -586,6 +588,7 @@ int lance_start_xmit (struct sk_buff *skb, struct net_device *dev) return 0; } +EXPORT_SYMBOL_GPL(lance_start_xmit); /* taken from the depca driver via a2065.c */ static void lance_load_multicast (struct net_device *dev) @@ -654,6 +657,7 @@ void lance_set_multicast (struct net_device *dev) if (!stopped) netif_start_queue (dev); } +EXPORT_SYMBOL_GPL(lance_set_multicast); #ifdef CONFIG_NET_POLL_CONTROLLER void lance_poll(struct net_device *dev) -- cgit v1.2.3 From 23bdfdd388723b8213f597743b1d4aba0d62de9c Mon Sep 17 00:00:00 2001 From: Steve Hodgson Date: Mon, 9 Jun 2008 19:34:32 +0100 Subject: sfc: Recover from RX queue flush failure RX queue flush can fail if traffic continues to arrive. Recover by performing an invisible reset. Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik --- drivers/net/sfc/falcon.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index d3f749c72d4..790db89db34 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -733,8 +733,10 @@ void falcon_fini_rx(struct efx_rx_queue *rx_queue) continue; break; } - if (rc) + if (rc) { EFX_ERR(efx, "failed to flush rx queue %d\n", rx_queue->queue); + efx_schedule_reset(efx, RESET_TYPE_INVISIBLE); + } /* Remove RX descriptor ring from card */ EFX_ZERO_OWORD(rx_desc_ptr); -- cgit v1.2.3 From 00aaea2f95d73d4e2b5e45cf77c3cbb16c59e87f Mon Sep 17 00:00:00 2001 From: Jan-Bernd Themann Date: Mon, 9 Jun 2008 15:17:37 +0100 Subject: ehea: set mac address fix eHEA has to call firmware functions in order to change the mac address of a logical port. This patch checks if the logical port is up when calling the register / deregister mac address calls. If the port is down these firmware calls would fail and are therefore not executed. Signed-off-by: Jan-Bernd Themann Signed-off-by: Jeff Garzik --- drivers/net/ehea/ehea_main.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index 287a6191873..faae01dc1c4 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -1766,16 +1766,20 @@ static int ehea_set_mac_addr(struct net_device *dev, void *sa) mutex_lock(&ehea_bcmc_regs.lock); /* Deregister old MAC in pHYP */ - ret = ehea_broadcast_reg_helper(port, H_DEREG_BCMC); - if (ret) - goto out_upregs; + if (port->state == EHEA_PORT_UP) { + ret = ehea_broadcast_reg_helper(port, H_DEREG_BCMC); + if (ret) + goto out_upregs; + } port->mac_addr = cb0->port_mac_addr << 16; /* Register new MAC in pHYP */ - ret = ehea_broadcast_reg_helper(port, H_REG_BCMC); - if (ret) - goto out_upregs; + if (port->state == EHEA_PORT_UP) { + ret = ehea_broadcast_reg_helper(port, H_REG_BCMC); + if (ret) + goto out_upregs; + } ret = 0; -- cgit v1.2.3 From 23cde76d801246a702e7a84c3fe3d655b35c89a1 Mon Sep 17 00:00:00 2001 From: Mark McLoughlin Date: Sun, 8 Jun 2008 20:49:00 +1000 Subject: virtio_net: Fix skb->csum_start computation hdr->csum_start is the offset from the start of the ethernet header to the transport layer checksum field. skb->csum_start is the offset from skb->head. skb_partial_csum_set() assumes that skb->data points to the ethernet header - i.e. it computes skb->csum_start by adding the headroom to hdr->csum_start. Since eth_type_trans() skb_pull()s the ethernet header, skb_partial_csum_set() should be called before eth_type_trans(). (Without this patch, GSO packets from a guest to the world outside the host are corrupted). Signed-off-by: Mark McLoughlin Acked-by: Herbert Xu Signed-off-by: Rusty Russell Signed-off-by: Jeff Garzik --- drivers/net/virtio_net.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 5450eac9e26..9a3b85e55cc 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -94,9 +94,7 @@ static void receive_skb(struct net_device *dev, struct sk_buff *skb, BUG_ON(len > MAX_PACKET_LEN); skb_trim(skb, len); - skb->protocol = eth_type_trans(skb, dev); - pr_debug("Receiving skb proto 0x%04x len %i type %i\n", - ntohs(skb->protocol), skb->len, skb->pkt_type); + dev->stats.rx_bytes += skb->len; dev->stats.rx_packets++; @@ -106,6 +104,10 @@ static void receive_skb(struct net_device *dev, struct sk_buff *skb, goto frame_err; } + skb->protocol = eth_type_trans(skb, dev); + pr_debug("Receiving skb proto 0x%04x len %i type %i\n", + ntohs(skb->protocol), skb->len, skb->pkt_type); + if (hdr->gso_type != VIRTIO_NET_HDR_GSO_NONE) { pr_debug("GSO!\n"); switch (hdr->gso_type & ~VIRTIO_NET_HDR_GSO_ECN) { -- cgit v1.2.3 From 14c998f034bdc9a5bfa53bca18fbd0738cbc65e8 Mon Sep 17 00:00:00 2001 From: Mark McLoughlin Date: Sun, 8 Jun 2008 20:50:56 +1000 Subject: virtio: virtio_net free transmit skbs in a timer virtio_net currently only frees old transmit skbs just before queueing new ones. If the queue is full, it then enables interrupts and waits for notification that more work has been performed. However, a side-effect of this scheme is that there are always xmit skbs left dangling when no new packets are sent, against the Documentation/networking/driver.txt guideline: "... it is not allowed for your TX mitigation scheme to let TX packets "hang out" in the TX ring unreclaimed forever if no new TX packets are sent." Add a timer to ensure that any time we queue new TX skbs, we will shortly free them again. This fixes an easily reproduced hang at shutdown where iptables attempts to unload nf_conntrack and nf_conntrack waits for an skb it is tracking to be freed, but virtio_net never frees it. Signed-off-by: Mark McLoughlin Signed-off-by: Rusty Russell Signed-off-by: Jeff Garzik --- drivers/net/virtio_net.c | 28 ++++++++++++++++++++++++++-- 1 file changed, 26 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 9a3b85e55cc..156d76fee16 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -44,6 +44,8 @@ struct virtnet_info /* The skb we couldn't send because buffers were full. */ struct sk_buff *last_xmit_skb; + struct timer_list xmit_free_timer; + /* Number of input buffers, and max we've ever had. */ unsigned int num, max; @@ -240,9 +242,23 @@ static void free_old_xmit_skbs(struct virtnet_info *vi) } } +static void xmit_free(unsigned long data) +{ + struct virtnet_info *vi = (void *)data; + + netif_tx_lock(vi->dev); + + free_old_xmit_skbs(vi); + + if (!skb_queue_empty(&vi->send)) + mod_timer(&vi->xmit_free_timer, jiffies + (HZ/10)); + + netif_tx_unlock(vi->dev); +} + static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb) { - int num; + int num, err; struct scatterlist sg[2+MAX_SKB_FRAGS]; struct virtio_net_hdr *hdr; const unsigned char *dest = ((struct ethhdr *)skb->data)->h_dest; @@ -285,7 +301,11 @@ static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb) vnet_hdr_to_sg(sg, skb); num = skb_to_sgvec(skb, sg+1, 0, skb->len) + 1; - return vi->svq->vq_ops->add_buf(vi->svq, sg, num, 0, skb); + err = vi->svq->vq_ops->add_buf(vi->svq, sg, num, 0, skb); + if (!err) + mod_timer(&vi->xmit_free_timer, jiffies + (HZ/10)); + + return err; } static void xmit_tasklet(unsigned long data) @@ -456,6 +476,8 @@ static int virtnet_probe(struct virtio_device *vdev) tasklet_init(&vi->tasklet, xmit_tasklet, (unsigned long)vi); + setup_timer(&vi->xmit_free_timer, xmit_free, (unsigned long)vi); + err = register_netdev(dev); if (err) { pr_debug("virtio_net: registering device failed\n"); @@ -493,6 +515,8 @@ static void virtnet_remove(struct virtio_device *vdev) /* Stop all the virtqueues. */ vdev->config->reset(vdev); + del_timer_sync(&vi->xmit_free_timer); + /* Free our skbs in send and recv queues, if any. */ while ((skb = __skb_dequeue(&vi->recv)) != NULL) { kfree_skb(skb); -- cgit v1.2.3 From 363f15149cfba67d29f1e6a6103dda079f27f3fa Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Sun, 8 Jun 2008 20:51:55 +1000 Subject: virtio: use callback on empty in virtio_net virtio_net uses a timer to free old transmitted packets, rather than leaving callbacks enabled all the time. If the host promises to always notify us when the transmit ring is empty, we can free packets at that point and avoid the timer. Signed-off-by: Rusty Russell Signed-off-by: Jeff Garzik --- drivers/net/virtio_net.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 156d76fee16..4452306d532 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -44,6 +44,7 @@ struct virtnet_info /* The skb we couldn't send because buffers were full. */ struct sk_buff *last_xmit_skb; + /* If we need to free in a timer, this is it. */ struct timer_list xmit_free_timer; /* Number of input buffers, and max we've ever had. */ @@ -51,6 +52,7 @@ struct virtnet_info /* For cleaning up after transmission. */ struct tasklet_struct tasklet; + bool free_in_tasklet; /* Receive & send queues. */ struct sk_buff_head recv; @@ -74,7 +76,7 @@ static void skb_xmit_done(struct virtqueue *svq) /* Suppress further interrupts. */ svq->vq_ops->disable_cb(svq); - /* We were waiting for more output buffers. */ + /* We were probably waiting for more output buffers. */ netif_wake_queue(vi->dev); /* Make sure we re-xmit last_xmit_skb: if there are no more packets @@ -242,6 +244,8 @@ static void free_old_xmit_skbs(struct virtnet_info *vi) } } +/* If the virtio transport doesn't always notify us when all in-flight packets + * are consumed, we fall back to using this function on a timer to free them. */ static void xmit_free(unsigned long data) { struct virtnet_info *vi = (void *)data; @@ -302,7 +306,7 @@ static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb) num = skb_to_sgvec(skb, sg+1, 0, skb->len) + 1; err = vi->svq->vq_ops->add_buf(vi->svq, sg, num, 0, skb); - if (!err) + if (!err && !vi->free_in_tasklet) mod_timer(&vi->xmit_free_timer, jiffies + (HZ/10)); return err; @@ -317,6 +321,8 @@ static void xmit_tasklet(unsigned long data) vi->svq->vq_ops->kick(vi->svq); vi->last_xmit_skb = NULL; } + if (vi->free_in_tasklet) + free_old_xmit_skbs(vi); netif_tx_unlock_bh(vi->dev); } @@ -457,6 +463,10 @@ static int virtnet_probe(struct virtio_device *vdev) vi->vdev = vdev; vdev->priv = vi; + /* If they give us a callback when all buffers are done, we don't need + * the timer. */ + vi->free_in_tasklet = virtio_has_feature(vdev,VIRTIO_F_NOTIFY_ON_EMPTY); + /* We expect two virtqueues, receive then send. */ vi->rvq = vdev->config->find_vq(vdev, 0, skb_recv_done); if (IS_ERR(vi->rvq)) { @@ -476,7 +486,8 @@ static int virtnet_probe(struct virtio_device *vdev) tasklet_init(&vi->tasklet, xmit_tasklet, (unsigned long)vi); - setup_timer(&vi->xmit_free_timer, xmit_free, (unsigned long)vi); + if (!vi->free_in_tasklet) + setup_timer(&vi->xmit_free_timer, xmit_free, (unsigned long)vi); err = register_netdev(dev); if (err) { @@ -515,7 +526,8 @@ static void virtnet_remove(struct virtio_device *vdev) /* Stop all the virtqueues. */ vdev->config->reset(vdev); - del_timer_sync(&vi->xmit_free_timer); + if (!vi->free_in_tasklet) + del_timer_sync(&vi->xmit_free_timer); /* Free our skbs in send and recv queues, if any. */ while ((skb = __skb_dequeue(&vi->recv)) != NULL) { @@ -540,7 +552,7 @@ static struct virtio_device_id id_table[] = { static unsigned int features[] = { VIRTIO_NET_F_CSUM, VIRTIO_NET_F_GSO, VIRTIO_NET_F_MAC, VIRTIO_NET_F_HOST_TSO4, VIRTIO_NET_F_HOST_UFO, VIRTIO_NET_F_HOST_TSO6, - VIRTIO_NET_F_HOST_ECN, + VIRTIO_NET_F_HOST_ECN, VIRTIO_F_NOTIFY_ON_EMPTY, }; static struct virtio_driver virtio_net = { -- cgit v1.2.3 From e5bd7be56787f8c5042081157fff983bcf0c8a42 Mon Sep 17 00:00:00 2001 From: Frank Blaschka Date: Fri, 6 Jun 2008 12:37:44 +0200 Subject: qeth: layer 3 Oops in ip event handler The ip event handler may present us non qeth network interfaces. Add qeth card pointer check. Signed-off-by: Frank Blaschka Signed-off-by: Jeff Garzik --- drivers/s390/net/qeth_l3_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index 94a8ead64ed..b041ea8c957 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -2070,7 +2070,7 @@ static struct qeth_card *qeth_l3_get_card_from_dev(struct net_device *dev) card = netdev_priv(dev); else if (rc == QETH_VLAN_CARD) card = netdev_priv(vlan_dev_info(dev)->real_dev); - if (card->options.layer2) + if (card && card->options.layer2) card = NULL; QETH_DBF_TEXT_(TRACE, 4, "%d", rc); return card ; -- cgit v1.2.3 From f06f6f3224afdd7e58207d1f5950f4666c5f095f Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Fri, 6 Jun 2008 12:37:45 +0200 Subject: qeth: Use ccw_device_get_id(). Get the devno from the ccw device via ccw_device_get_id() instead of parsing the bus_id. Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky Signed-off-by: Frank Blaschka Signed-off-by: Jeff Garzik --- drivers/s390/net/qeth_core_main.c | 11 +++-------- drivers/s390/net/qeth_l2_main.c | 11 ++++------- 2 files changed, 7 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 436bf1f6d4a..5a71ae90936 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -1407,12 +1407,6 @@ static void qeth_init_func_level(struct qeth_card *card) } } -static inline __u16 qeth_raw_devno_from_bus_id(char *id) -{ - id += (strlen(id) - 4); - return (__u16) simple_strtoul(id, &id, 16); -} - static int qeth_idx_activate_get_answer(struct qeth_channel *channel, void (*idx_reply_cb)(struct qeth_channel *, struct qeth_cmd_buffer *)) @@ -1468,6 +1462,7 @@ static int qeth_idx_activate_channel(struct qeth_channel *channel, __u16 temp; __u8 tmp; int rc; + struct ccw_dev_id temp_devid; card = CARD_FROM_CDEV(channel->ccwdev); @@ -1494,8 +1489,8 @@ static int qeth_idx_activate_channel(struct qeth_channel *channel, &card->token.issuer_rm_w, QETH_MPC_TOKEN_LENGTH); memcpy(QETH_IDX_ACT_FUNC_LEVEL(iob->data), &card->info.func_level, sizeof(__u16)); - temp = qeth_raw_devno_from_bus_id(CARD_DDEV_ID(card)); - memcpy(QETH_IDX_ACT_QDIO_DEV_CUA(iob->data), &temp, 2); + ccw_device_get_id(CARD_DDEV(card), &temp_devid); + memcpy(QETH_IDX_ACT_QDIO_DEV_CUA(iob->data), &temp_devid.devno, 2); temp = (card->info.cula << 8) + card->info.unit_addr2; memcpy(QETH_IDX_ACT_QDIO_DEV_REALADDR(iob->data), &temp, 2); diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 86ec50ddae1..d35a74c3b47 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -101,19 +101,16 @@ static struct net_device *qeth_l2_netdev_by_devno(unsigned char *read_dev_no) { struct qeth_card *card; struct net_device *ndev; - unsigned char *readno; - __u16 temp_dev_no, card_dev_no; - char *endp; + __u16 temp_dev_no; unsigned long flags; + struct ccw_dev_id read_devid; ndev = NULL; memcpy(&temp_dev_no, read_dev_no, 2); read_lock_irqsave(&qeth_core_card_list.rwlock, flags); list_for_each_entry(card, &qeth_core_card_list.list, list) { - readno = CARD_RDEV_ID(card); - readno += (strlen(readno) - 4); - card_dev_no = simple_strtoul(readno, &endp, 16); - if (card_dev_no == temp_dev_no) { + ccw_device_get_id(CARD_RDEV(card), &read_devid); + if (read_devid.devno == temp_dev_no) { ndev = card->dev; break; } -- cgit v1.2.3 From 14cc21b6770972e5d1487dbf3a2caaf63cae909a Mon Sep 17 00:00:00 2001 From: Frank Blaschka Date: Fri, 6 Jun 2008 12:37:46 +0200 Subject: qeth: reduce number of kernel messages Remove unnecessary messages. Write important debug information to s390dbf. Signed-off-by: Frank Blaschka Signed-off-by: Jeff Garzik --- drivers/s390/net/qeth_core_main.c | 30 ++++------------ drivers/s390/net/qeth_core_offl.c | 6 ++-- drivers/s390/net/qeth_core_sys.c | 12 ------- drivers/s390/net/qeth_l2_main.c | 29 ++++++---------- drivers/s390/net/qeth_l3_main.c | 72 ++++++++++++--------------------------- drivers/s390/net/qeth_l3_sys.c | 24 ------------- 6 files changed, 42 insertions(+), 131 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 5a71ae90936..f428d757e88 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -290,9 +290,6 @@ int qeth_set_large_send(struct qeth_card *card, card->dev->features |= NETIF_F_TSO | NETIF_F_SG | NETIF_F_HW_CSUM; } else { - PRINT_WARN("TSO not supported on %s. " - "large_send set to 'no'.\n", - card->dev->name); card->dev->features &= ~(NETIF_F_TSO | NETIF_F_SG | NETIF_F_HW_CSUM); card->options.large_send = QETH_LARGE_SEND_NO; @@ -1433,7 +1430,7 @@ static int qeth_idx_activate_get_answer(struct qeth_channel *channel, spin_unlock_irqrestore(get_ccwdev_lock(channel->ccwdev), flags); if (rc) { - PRINT_ERR("Error2 in activating channel rc=%d\n", rc); + QETH_DBF_MESSAGE(2, "Error2 in activating channel rc=%d\n", rc); QETH_DBF_TEXT_(SETUP, 2, "2err%d", rc); atomic_set(&channel->irq_pending, 0); wake_up(&card->wait_q); @@ -1503,7 +1500,8 @@ static int qeth_idx_activate_channel(struct qeth_channel *channel, spin_unlock_irqrestore(get_ccwdev_lock(channel->ccwdev), flags); if (rc) { - PRINT_ERR("Error1 in activating channel. rc=%d\n", rc); + QETH_DBF_MESSAGE(2, "Error1 in activating channel. rc=%d\n", + rc); QETH_DBF_TEXT_(SETUP, 2, "1err%d", rc); atomic_set(&channel->irq_pending, 0); wake_up(&card->wait_q); @@ -1653,7 +1651,6 @@ int qeth_send_control_data(struct qeth_card *card, int len, reply = qeth_alloc_reply(card); if (!reply) { - PRINT_WARN("Could not alloc qeth_reply!\n"); return -ENOMEM; } reply->callback = reply_cb; @@ -2607,15 +2604,9 @@ void qeth_queue_input_buffer(struct qeth_card *card, int index) if (newcount < count) { /* we are in memory shortage so we switch back to traditional skb allocation and drop packages */ - if (!atomic_read(&card->force_alloc_skb) && - net_ratelimit()) - PRINT_WARN("Switch to alloc skb\n"); atomic_set(&card->force_alloc_skb, 3); count = newcount; } else { - if ((atomic_read(&card->force_alloc_skb) == 1) && - net_ratelimit()) - PRINT_WARN("Switch to sg\n"); atomic_add_unless(&card->force_alloc_skb, -1, 0); } @@ -3029,7 +3020,7 @@ int qeth_get_elements_no(struct qeth_card *card, void *hdr, elements_needed = 1 + (((((unsigned long) hdr) % PAGE_SIZE) + skb->len) >> PAGE_SHIFT); if ((elements_needed + elems) > QETH_MAX_BUFFER_ELEMENTS(card)) { - PRINT_ERR("Invalid size of IP packet " + QETH_DBF_MESSAGE(2, "Invalid size of IP packet " "(Number=%d / Length=%d). Discarded.\n", (elements_needed+elems), skb->len); return 0; @@ -3242,8 +3233,6 @@ int qeth_do_send_packet(struct qeth_card *card, struct qeth_qdio_out_q *queue, * free buffers) to handle eddp context */ if (qeth_eddp_check_buffers_for_context(queue, ctx) < 0) { - if (net_ratelimit()) - PRINT_WARN("eddp tx_dropped 1\n"); rc = -EBUSY; goto out; } @@ -3255,7 +3244,6 @@ int qeth_do_send_packet(struct qeth_card *card, struct qeth_qdio_out_q *queue, tmp = qeth_eddp_fill_buffer(queue, ctx, queue->next_buf_to_fill); if (tmp < 0) { - PRINT_ERR("eddp tx_dropped 2\n"); rc = -EBUSY; goto out; } @@ -3597,8 +3585,6 @@ int qeth_snmp_command(struct qeth_card *card, char __user *udata) if ((!qeth_adp_supported(card, IPA_SETADP_SET_SNMP_CONTROL)) && (!card->options.layer2)) { - PRINT_WARN("SNMP Query MIBS not supported " - "on %s!\n", QETH_CARD_IFNAME(card)); return -EOPNOTSUPP; } /* skip 4 bytes (data_len struct member) to get req_len */ @@ -3629,7 +3615,7 @@ int qeth_snmp_command(struct qeth_card *card, char __user *udata) rc = qeth_send_ipa_snmp_cmd(card, iob, QETH_SETADP_BASE_LEN + req_len, qeth_snmp_command_cb, (void *)&qinfo); if (rc) - PRINT_WARN("SNMP command failed on %s: (0x%x)\n", + QETH_DBF_MESSAGE(2, "SNMP command failed on %s: (0x%x)\n", QETH_CARD_IFNAME(card), rc); else { if (copy_to_user(udata, qinfo.udata, qinfo.udata_len)) @@ -3802,8 +3788,8 @@ retry: if (mpno) mpno = min(mpno - 1, QETH_MAX_PORTNO); if (card->info.portno > mpno) { - PRINT_ERR("Device %s does not offer port number %d \n.", - CARD_BUS_ID(card), card->info.portno); + QETH_DBF_MESSAGE(2, "Device %s does not offer port number %d" + "\n.", CARD_BUS_ID(card), card->info.portno); rc = -ENODEV; goto out; } @@ -3980,8 +3966,6 @@ struct sk_buff *qeth_core_get_next_skb(struct qeth_card *card, return skb; no_mem: if (net_ratelimit()) { - PRINT_WARN("No memory for packet received on %s.\n", - QETH_CARD_IFNAME(card)); QETH_DBF_TEXT(TRACE, 2, "noskbmem"); QETH_DBF_TEXT_(TRACE, 2, "%s", CARD_BUS_ID(card)); } diff --git a/drivers/s390/net/qeth_core_offl.c b/drivers/s390/net/qeth_core_offl.c index 822df836285..452874e8974 100644 --- a/drivers/s390/net/qeth_core_offl.c +++ b/drivers/s390/net/qeth_core_offl.c @@ -122,8 +122,8 @@ int qeth_eddp_fill_buffer(struct qeth_qdio_out_q *queue, if (element == 0) return -EBUSY; else { - PRINT_WARN("could only partially fill eddp " - "buffer!\n"); + QETH_DBF_MESSAGE(2, "could only partially fill" + "eddp buffer!\n"); goto out; } } @@ -143,8 +143,6 @@ int qeth_eddp_fill_buffer(struct qeth_qdio_out_q *queue, if (must_refcnt) { must_refcnt = 0; if (qeth_eddp_buf_ref_context(buf, ctx)) { - PRINT_WARN("no memory to create eddp context " - "reference\n"); goto out_check; } } diff --git a/drivers/s390/net/qeth_core_sys.c b/drivers/s390/net/qeth_core_sys.c index 08a50f05728..c26e842ad90 100644 --- a/drivers/s390/net/qeth_core_sys.c +++ b/drivers/s390/net/qeth_core_sys.c @@ -129,7 +129,6 @@ static ssize_t qeth_dev_portno_store(struct device *dev, portno = simple_strtoul(buf, &tmp, 16); if (portno > QETH_MAX_PORTNO) { - PRINT_WARN("portno 0x%X is out of range\n", portno); return -EINVAL; } @@ -223,8 +222,6 @@ static ssize_t qeth_dev_prioqing_store(struct device *dev, * if though we have to permit priority queueing */ if (card->qdio.no_out_queues == 1) { - PRINT_WARN("Priority queueing disabled due " - "to hardware limitations!\n"); card->qdio.do_prio_queueing = QETH_PRIOQ_DEFAULT; return -EPERM; } @@ -250,7 +247,6 @@ static ssize_t qeth_dev_prioqing_store(struct device *dev, card->qdio.do_prio_queueing = QETH_NO_PRIO_QUEUEING; card->qdio.default_out_queue = QETH_DEFAULT_QUEUE; } else { - PRINT_WARN("Unknown queueing type '%s'\n", tmp); return -EINVAL; } return count; @@ -291,9 +287,6 @@ static ssize_t qeth_dev_bufcnt_store(struct device *dev, ((cnt > QETH_IN_BUF_COUNT_MAX) ? QETH_IN_BUF_COUNT_MAX : cnt); if (old_cnt != cnt) { rc = qeth_realloc_buffer_pool(card, cnt); - if (rc) - PRINT_WARN("Error (%d) while setting " - "buffer count.\n", rc); } return count; } @@ -355,7 +348,6 @@ static ssize_t qeth_dev_performance_stats_store(struct device *dev, card->perf_stats.initial_rx_packets = card->stats.rx_packets; card->perf_stats.initial_tx_packets = card->stats.tx_packets; } else { - PRINT_WARN("performance_stats: write 0 or 1 to this file!\n"); return -EINVAL; } return count; @@ -399,7 +391,6 @@ static ssize_t qeth_dev_layer2_store(struct device *dev, newdis = QETH_DISCIPLINE_LAYER2; break; default: - PRINT_WARN("layer2: write 0 or 1 to this file!\n"); return -EINVAL; } @@ -463,7 +454,6 @@ static ssize_t qeth_dev_large_send_store(struct device *dev, } else if (!strcmp(tmp, "TSO")) { type = QETH_LARGE_SEND_TSO; } else { - PRINT_WARN("large_send: invalid mode %s!\n", tmp); return -EINVAL; } if (card->options.large_send == type) @@ -503,8 +493,6 @@ static ssize_t qeth_dev_blkt_store(struct qeth_card *card, if (i <= max_value) { *value = i; } else { - PRINT_WARN("blkt total time: write values between" - " 0 and %d to this file!\n", max_value); return -EINVAL; } return count; diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index d35a74c3b47..dd7659c8de1 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -131,14 +131,14 @@ static int qeth_l2_send_setgroupmac_cb(struct qeth_card *card, mac = &cmd->data.setdelmac.mac[0]; /* MAC already registered, needed in couple/uncouple case */ if (cmd->hdr.return_code == 0x2005) { - PRINT_WARN("Group MAC %02x:%02x:%02x:%02x:%02x:%02x " \ + QETH_DBF_MESSAGE(2, "Group MAC %02x:%02x:%02x:%02x:%02x:%02x " "already existing on %s \n", mac[0], mac[1], mac[2], mac[3], mac[4], mac[5], QETH_CARD_IFNAME(card)); cmd->hdr.return_code = 0; } if (cmd->hdr.return_code) - PRINT_ERR("Could not set group MAC " \ + QETH_DBF_MESSAGE(2, "Could not set group MAC " "%02x:%02x:%02x:%02x:%02x:%02x on %s: %x\n", mac[0], mac[1], mac[2], mac[3], mac[4], mac[5], QETH_CARD_IFNAME(card), cmd->hdr.return_code); @@ -163,7 +163,7 @@ static int qeth_l2_send_delgroupmac_cb(struct qeth_card *card, cmd = (struct qeth_ipa_cmd *) data; mac = &cmd->data.setdelmac.mac[0]; if (cmd->hdr.return_code) - PRINT_ERR("Could not delete group MAC " \ + QETH_DBF_MESSAGE(2, "Could not delete group MAC " "%02x:%02x:%02x:%02x:%02x:%02x on %s: %x\n", mac[0], mac[1], mac[2], mac[3], mac[4], mac[5], QETH_CARD_IFNAME(card), cmd->hdr.return_code); @@ -183,10 +183,8 @@ static void qeth_l2_add_mc(struct qeth_card *card, __u8 *mac) mc = kmalloc(sizeof(struct qeth_mc_mac), GFP_ATOMIC); - if (!mc) { - PRINT_ERR("no mem vor mc mac address\n"); + if (!mc) return; - } memcpy(mc->mc_addr, mac, OSA_ADDR_LEN); mc->mc_addrlen = OSA_ADDR_LEN; @@ -277,7 +275,7 @@ static int qeth_l2_send_setdelvlan_cb(struct qeth_card *card, QETH_DBF_TEXT(TRACE, 2, "L2sdvcb"); cmd = (struct qeth_ipa_cmd *) data; if (cmd->hdr.return_code) { - PRINT_ERR("Error in processing VLAN %i on %s: 0x%x. " + QETH_DBF_MESSAGE(2, "Error in processing VLAN %i on %s: 0x%x. " "Continuing\n", cmd->data.setdelvlan.vlan_id, QETH_CARD_IFNAME(card), cmd->hdr.return_code); QETH_DBF_TEXT_(TRACE, 2, "L2VL%4x", cmd->hdr.command); @@ -330,8 +328,6 @@ static void qeth_l2_vlan_rx_add_vid(struct net_device *dev, unsigned short vid) spin_lock_bh(&card->vlanlock); list_add_tail(&id->list, &card->vid_list); spin_unlock_bh(&card->vlanlock); - } else { - PRINT_ERR("no memory for vid\n"); } } @@ -547,16 +543,15 @@ static int qeth_l2_request_initial_mac(struct qeth_card *card) rc = qeth_query_setadapterparms(card); if (rc) { - PRINT_WARN("could not query adapter parameters on device %s: " - "x%x\n", CARD_BUS_ID(card), rc); + QETH_DBF_MESSAGE(2, "could not query adapter parameters on " + "device %s: x%x\n", CARD_BUS_ID(card), rc); } if (card->info.guestlan) { rc = qeth_setadpparms_change_macaddr(card); if (rc) { - PRINT_WARN("couldn't get MAC address on " - "device %s: x%x\n", - CARD_BUS_ID(card), rc); + QETH_DBF_MESSAGE(2, "couldn't get MAC address on " + "device %s: x%x\n", CARD_BUS_ID(card), rc); QETH_DBF_TEXT_(SETUP, 2, "1err%d", rc); return rc; } @@ -582,8 +577,6 @@ static int qeth_l2_set_mac_address(struct net_device *dev, void *p) } if (card->info.type == QETH_CARD_TYPE_OSN) { - PRINT_WARN("Setting MAC address on %s is not supported.\n", - dev->name); QETH_DBF_TEXT(TRACE, 3, "setmcOSN"); return -EOPNOTSUPP; } @@ -663,7 +656,7 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) ctx = qeth_eddp_create_context(card, new_skb, hdr, skb->sk->sk_protocol); if (ctx == NULL) { - PRINT_WARN("could not create eddp context\n"); + QETH_DBF_MESSAGE(2, "could not create eddp context\n"); goto tx_drop; } } else { @@ -1152,7 +1145,7 @@ static int qeth_osn_send_control_data(struct qeth_card *card, int len, (addr_t) iob, 0, 0); spin_unlock_irqrestore(get_ccwdev_lock(card->write.ccwdev), flags); if (rc) { - PRINT_WARN("qeth_osn_send_control_data: " + QETH_DBF_MESSAGE(2, "qeth_osn_send_control_data: " "ccw_device_start rc = %i\n", rc); QETH_DBF_TEXT_(TRACE, 2, " err%d", rc); qeth_release_buffer(iob->channel, iob); diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index b041ea8c957..de256e48bfe 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -311,7 +311,6 @@ static struct qeth_ipaddr *qeth_l3_get_addr_buffer( addr = kzalloc(sizeof(struct qeth_ipaddr), GFP_ATOMIC); if (addr == NULL) { - PRINT_WARN("Not enough memory to add address\n"); return NULL; } addr->type = QETH_IP_TYPE_NORMAL; @@ -649,15 +648,6 @@ static void qeth_l3_correct_routing_type(struct qeth_card *card, } } out_inval: - PRINT_WARN("Routing type '%s' not supported for interface %s.\n" - "Router status set to 'no router'.\n", - ((*type == PRIMARY_ROUTER)? "primary router" : - (*type == SECONDARY_ROUTER)? "secondary router" : - (*type == PRIMARY_CONNECTOR)? "primary connector" : - (*type == SECONDARY_CONNECTOR)? "secondary connector" : - (*type == MULTICAST_ROUTER)? "multicast router" : - "unknown"), - card->dev->name); *type = NO_ROUTER; } @@ -674,9 +664,9 @@ int qeth_l3_setrouting_v4(struct qeth_card *card) QETH_PROT_IPV4); if (rc) { card->options.route4.type = NO_ROUTER; - PRINT_WARN("Error (0x%04x) while setting routing type on %s. " - "Type set to 'no router'.\n", - rc, QETH_CARD_IFNAME(card)); + QETH_DBF_MESSAGE(2, "Error (0x%04x) while setting routing type" + " on %s. Type set to 'no router'.\n", rc, + QETH_CARD_IFNAME(card)); } return rc; } @@ -697,9 +687,9 @@ int qeth_l3_setrouting_v6(struct qeth_card *card) QETH_PROT_IPV6); if (rc) { card->options.route6.type = NO_ROUTER; - PRINT_WARN("Error (0x%04x) while setting routing type on %s. " - "Type set to 'no router'.\n", - rc, QETH_CARD_IFNAME(card)); + QETH_DBF_MESSAGE(2, "Error (0x%04x) while setting routing type" + " on %s. Type set to 'no router'.\n", rc, + QETH_CARD_IFNAME(card)); } #endif return rc; @@ -737,7 +727,6 @@ int qeth_l3_add_ipato_entry(struct qeth_card *card, if (!memcmp(ipatoe->addr, new->addr, (ipatoe->proto == QETH_PROT_IPV4)? 4:16) && (ipatoe->mask_bits == new->mask_bits)) { - PRINT_WARN("ipato entry already exists!\n"); rc = -EEXIST; break; } @@ -802,7 +791,6 @@ int qeth_l3_add_vipa(struct qeth_card *card, enum qeth_prot_versions proto, rc = -EEXIST; spin_unlock_irqrestore(&card->ip_lock, flags); if (rc) { - PRINT_WARN("Cannot add VIPA. Address already exists!\n"); return rc; } if (!qeth_l3_add_ip(card, ipaddr)) @@ -867,7 +855,6 @@ int qeth_l3_add_rxip(struct qeth_card *card, enum qeth_prot_versions proto, rc = -EEXIST; spin_unlock_irqrestore(&card->ip_lock, flags); if (rc) { - PRINT_WARN("Cannot add RXIP. Address already exists!\n"); return rc; } if (!qeth_l3_add_ip(card, ipaddr)) @@ -1020,23 +1007,23 @@ static int qeth_l3_setadapter_hstr(struct qeth_card *card) IPA_SETADP_SET_BROADCAST_MODE, card->options.broadcast_mode); if (rc) - PRINT_WARN("couldn't set broadcast mode on " + QETH_DBF_MESSAGE(2, "couldn't set broadcast mode on " "device %s: x%x\n", CARD_BUS_ID(card), rc); rc = qeth_l3_send_setadp_mode(card, IPA_SETADP_ALTER_MAC_ADDRESS, card->options.macaddr_mode); if (rc) - PRINT_WARN("couldn't set macaddr mode on " + QETH_DBF_MESSAGE(2, "couldn't set macaddr mode on " "device %s: x%x\n", CARD_BUS_ID(card), rc); return rc; } if (card->options.broadcast_mode == QETH_TR_BROADCAST_LOCAL) - PRINT_WARN("set adapter parameters not available " + QETH_DBF_MESSAGE(2, "set adapter parameters not available " "to set broadcast mode, using ALLRINGS " "on device %s:\n", CARD_BUS_ID(card)); if (card->options.macaddr_mode == QETH_TR_MACADDR_CANONICAL) - PRINT_WARN("set adapter parameters not available " + QETH_DBF_MESSAGE(2, "set adapter parameters not available " "to set macaddr mode, using NONCANONICAL " "on device %s:\n", CARD_BUS_ID(card)); return 0; @@ -2182,8 +2169,6 @@ static int qeth_l3_arp_set_no_entries(struct qeth_card *card, int no_entries) if (card->info.guestlan) return -EOPNOTSUPP; if (!qeth_is_supported(card, IPA_ARP_PROCESSING)) { - PRINT_WARN("ARP processing not supported " - "on %s!\n", QETH_CARD_IFNAME(card)); return -EOPNOTSUPP; } rc = qeth_l3_send_simple_setassparms(card, IPA_ARP_PROCESSING, @@ -2191,8 +2176,8 @@ static int qeth_l3_arp_set_no_entries(struct qeth_card *card, int no_entries) no_entries); if (rc) { tmp = rc; - PRINT_WARN("Could not set number of ARP entries on %s: " - "%s (0x%x/%d)\n", QETH_CARD_IFNAME(card), + QETH_DBF_MESSAGE(2, "Could not set number of ARP entries on " + "%s: %s (0x%x/%d)\n", QETH_CARD_IFNAME(card), qeth_l3_arp_get_error_cause(&rc), tmp, tmp); } return rc; @@ -2260,9 +2245,6 @@ static int qeth_l3_arp_query_cb(struct qeth_card *card, qdata->no_entries * uentry_size){ QETH_DBF_TEXT_(TRACE, 4, "qaer3%i", -ENOMEM); cmd->hdr.return_code = -ENOMEM; - PRINT_WARN("query ARP user space buffer is too small for " - "the returned number of ARP entries. " - "Aborting query!\n"); goto out_error; } QETH_DBF_TEXT_(TRACE, 4, "anore%i", @@ -2324,8 +2306,6 @@ static int qeth_l3_arp_query(struct qeth_card *card, char __user *udata) if (!qeth_is_supported(card,/*IPA_QUERY_ARP_ADDR_INFO*/ IPA_ARP_PROCESSING)) { - PRINT_WARN("ARP processing not supported " - "on %s!\n", QETH_CARD_IFNAME(card)); return -EOPNOTSUPP; } /* get size of userspace buffer and mask_bits -> 6 bytes */ @@ -2344,7 +2324,7 @@ static int qeth_l3_arp_query(struct qeth_card *card, char __user *udata) qeth_l3_arp_query_cb, (void *)&qinfo); if (rc) { tmp = rc; - PRINT_WARN("Error while querying ARP cache on %s: %s " + QETH_DBF_MESSAGE(2, "Error while querying ARP cache on %s: %s " "(0x%x/%d)\n", QETH_CARD_IFNAME(card), qeth_l3_arp_get_error_cause(&rc), tmp, tmp); if (copy_to_user(udata, qinfo.udata, 4)) @@ -2375,8 +2355,6 @@ static int qeth_l3_arp_add_entry(struct qeth_card *card, if (card->info.guestlan) return -EOPNOTSUPP; if (!qeth_is_supported(card, IPA_ARP_PROCESSING)) { - PRINT_WARN("ARP processing not supported " - "on %s!\n", QETH_CARD_IFNAME(card)); return -EOPNOTSUPP; } @@ -2391,10 +2369,9 @@ static int qeth_l3_arp_add_entry(struct qeth_card *card, if (rc) { tmp = rc; qeth_l3_ipaddr4_to_string((u8 *)entry->ipaddr, buf); - PRINT_WARN("Could not add ARP entry for address %s on %s: " - "%s (0x%x/%d)\n", - buf, QETH_CARD_IFNAME(card), - qeth_l3_arp_get_error_cause(&rc), tmp, tmp); + QETH_DBF_MESSAGE(2, "Could not add ARP entry for address %s " + "on %s: %s (0x%x/%d)\n", buf, QETH_CARD_IFNAME(card), + qeth_l3_arp_get_error_cause(&rc), tmp, tmp); } return rc; } @@ -2417,8 +2394,6 @@ static int qeth_l3_arp_remove_entry(struct qeth_card *card, if (card->info.guestlan) return -EOPNOTSUPP; if (!qeth_is_supported(card, IPA_ARP_PROCESSING)) { - PRINT_WARN("ARP processing not supported " - "on %s!\n", QETH_CARD_IFNAME(card)); return -EOPNOTSUPP; } memcpy(buf, entry, 12); @@ -2433,10 +2408,9 @@ static int qeth_l3_arp_remove_entry(struct qeth_card *card, tmp = rc; memset(buf, 0, 16); qeth_l3_ipaddr4_to_string((u8 *)entry->ipaddr, buf); - PRINT_WARN("Could not delete ARP entry for address %s on %s: " - "%s (0x%x/%d)\n", - buf, QETH_CARD_IFNAME(card), - qeth_l3_arp_get_error_cause(&rc), tmp, tmp); + QETH_DBF_MESSAGE(2, "Could not delete ARP entry for address %s" + " on %s: %s (0x%x/%d)\n", buf, QETH_CARD_IFNAME(card), + qeth_l3_arp_get_error_cause(&rc), tmp, tmp); } return rc; } @@ -2456,16 +2430,14 @@ static int qeth_l3_arp_flush_cache(struct qeth_card *card) if (card->info.guestlan || (card->info.type == QETH_CARD_TYPE_IQD)) return -EOPNOTSUPP; if (!qeth_is_supported(card, IPA_ARP_PROCESSING)) { - PRINT_WARN("ARP processing not supported " - "on %s!\n", QETH_CARD_IFNAME(card)); return -EOPNOTSUPP; } rc = qeth_l3_send_simple_setassparms(card, IPA_ARP_PROCESSING, IPA_CMD_ASS_ARP_FLUSH_CACHE, 0); if (rc) { tmp = rc; - PRINT_WARN("Could not flush ARP cache on %s: %s (0x%x/%d)\n", - QETH_CARD_IFNAME(card), + QETH_DBF_MESSAGE(2, "Could not flush ARP cache on %s: %s " + "(0x%x/%d)\n", QETH_CARD_IFNAME(card), qeth_l3_arp_get_error_cause(&rc), tmp, tmp); } return rc; @@ -2724,7 +2696,7 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) ctx = qeth_eddp_create_context(card, new_skb, hdr, skb->sk->sk_protocol); if (ctx == NULL) { - PRINT_WARN("could not create eddp context\n"); + QETH_DBF_MESSAGE(2, "could not create eddp context\n"); goto tx_drop; } } else { diff --git a/drivers/s390/net/qeth_l3_sys.c b/drivers/s390/net/qeth_l3_sys.c index 08f51fd902c..ac1993708ae 100644 --- a/drivers/s390/net/qeth_l3_sys.c +++ b/drivers/s390/net/qeth_l3_sys.c @@ -85,7 +85,6 @@ static ssize_t qeth_l3_dev_route_store(struct qeth_card *card, } else if (!strcmp(tmp, "multicast_router")) { route->type = MULTICAST_ROUTER; } else { - PRINT_WARN("Invalid routing type '%s'.\n", tmp); return -EINVAL; } if (((card->state == CARD_STATE_SOFTSETUP) || @@ -137,9 +136,6 @@ static ssize_t qeth_l3_dev_route6_store(struct device *dev, return -EINVAL; if (!qeth_is_supported(card, IPA_IPV6)) { - PRINT_WARN("IPv6 not supported for interface %s.\n" - "Routing status no changed.\n", - QETH_CARD_IFNAME(card)); return -ENOTSUPP; } @@ -179,7 +175,6 @@ static ssize_t qeth_l3_dev_fake_broadcast_store(struct device *dev, if ((i == 0) || (i == 1)) card->options.fake_broadcast = i; else { - PRINT_WARN("fake_broadcast: write 0 or 1 to this file!\n"); return -EINVAL; } return count; @@ -220,7 +215,6 @@ static ssize_t qeth_l3_dev_broadcast_mode_store(struct device *dev, if (!((card->info.link_type == QETH_LINK_TYPE_HSTR) || (card->info.link_type == QETH_LINK_TYPE_LANE_TR))) { - PRINT_WARN("Device is not a tokenring device!\n"); return -EINVAL; } @@ -233,8 +227,6 @@ static ssize_t qeth_l3_dev_broadcast_mode_store(struct device *dev, card->options.broadcast_mode = QETH_TR_BROADCAST_ALLRINGS; return count; } else { - PRINT_WARN("broadcast_mode: invalid mode %s!\n", - tmp); return -EINVAL; } return count; @@ -275,7 +267,6 @@ static ssize_t qeth_l3_dev_canonical_macaddr_store(struct device *dev, if (!((card->info.link_type == QETH_LINK_TYPE_HSTR) || (card->info.link_type == QETH_LINK_TYPE_LANE_TR))) { - PRINT_WARN("Device is not a tokenring device!\n"); return -EINVAL; } @@ -285,7 +276,6 @@ static ssize_t qeth_l3_dev_canonical_macaddr_store(struct device *dev, QETH_TR_MACADDR_CANONICAL : QETH_TR_MACADDR_NONCANONICAL; else { - PRINT_WARN("canonical_macaddr: write 0 or 1 to this file!\n"); return -EINVAL; } return count; @@ -327,7 +317,6 @@ static ssize_t qeth_l3_dev_checksum_store(struct device *dev, else if (!strcmp(tmp, "no_checksumming")) card->options.checksum_type = NO_CHECKSUMMING; else { - PRINT_WARN("Unknown checksumming type '%s'\n", tmp); return -EINVAL; } return count; @@ -382,8 +371,6 @@ static ssize_t qeth_l3_dev_ipato_enable_store(struct device *dev, } else if (!strcmp(tmp, "0")) { card->ipato.enabled = 0; } else { - PRINT_WARN("ipato_enable: write 0, 1 or 'toggle' to " - "this file\n"); return -EINVAL; } return count; @@ -422,8 +409,6 @@ static ssize_t qeth_l3_dev_ipato_invert4_store(struct device *dev, } else if (!strcmp(tmp, "0")) { card->ipato.invert4 = 0; } else { - PRINT_WARN("ipato_invert4: write 0, 1 or 'toggle' to " - "this file\n"); return -EINVAL; } return count; @@ -486,13 +471,10 @@ static int qeth_l3_parse_ipatoe(const char *buf, enum qeth_prot_versions proto, /* get address string */ end = strchr(start, '/'); if (!end || (end - start >= 40)) { - PRINT_WARN("Invalid format for ipato_addx/delx. " - "Use /\n"); return -EINVAL; } strncpy(buffer, start, end - start); if (qeth_l3_string_to_ipaddr(buffer, proto, addr)) { - PRINT_WARN("Invalid IP address format!\n"); return -EINVAL; } start = end + 1; @@ -500,7 +482,6 @@ static int qeth_l3_parse_ipatoe(const char *buf, enum qeth_prot_versions proto, if (!strlen(start) || (tmp == start) || (*mask_bits > ((proto == QETH_PROT_IPV4) ? 32 : 128))) { - PRINT_WARN("Invalid mask bits for ipato_addx/delx !\n"); return -EINVAL; } return 0; @@ -520,7 +501,6 @@ static ssize_t qeth_l3_dev_ipato_add_store(const char *buf, size_t count, ipatoe = kzalloc(sizeof(struct qeth_ipato_entry), GFP_KERNEL); if (!ipatoe) { - PRINT_WARN("No memory to allocate ipato entry\n"); return -ENOMEM; } ipatoe->proto = proto; @@ -609,8 +589,6 @@ static ssize_t qeth_l3_dev_ipato_invert6_store(struct device *dev, } else if (!strcmp(tmp, "0")) { card->ipato.invert6 = 0; } else { - PRINT_WARN("ipato_invert6: write 0, 1 or 'toggle' to " - "this file\n"); return -EINVAL; } return count; @@ -724,7 +702,6 @@ static int qeth_l3_parse_vipae(const char *buf, enum qeth_prot_versions proto, u8 *addr) { if (qeth_l3_string_to_ipaddr(buf, proto, addr)) { - PRINT_WARN("Invalid IP address format!\n"); return -EINVAL; } return 0; @@ -891,7 +868,6 @@ static int qeth_l3_parse_rxipe(const char *buf, enum qeth_prot_versions proto, u8 *addr) { if (qeth_l3_string_to_ipaddr(buf, proto, addr)) { - PRINT_WARN("Invalid IP address format!\n"); return -EINVAL; } return 0; -- cgit v1.2.3 From 345aa66e97e61dccafaaa835e4b20d9b241e187f Mon Sep 17 00:00:00 2001 From: Peter Tiedemann Date: Fri, 6 Jun 2008 12:37:47 +0200 Subject: qeth: Prepare-function to call s390dbf was wrong Prepare-function to call s390dbf was wrong handling variable arguments. This worked as macro but not as function any more. Now using va_list processing. Signed-off-by: Peter Tiedemann Signed-off-by: Frank Blaschka Signed-off-by: Jeff Garzik --- drivers/s390/net/qeth_core_main.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index f428d757e88..9a71dae223e 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -3983,15 +3983,17 @@ static void qeth_unregister_dbf_views(void) } } -void qeth_dbf_longtext(enum qeth_dbf_names dbf_nix, int level, char *text, ...) +void qeth_dbf_longtext(enum qeth_dbf_names dbf_nix, int level, char *fmt, ...) { char dbf_txt_buf[32]; + va_list args; if (level > (qeth_dbf[dbf_nix].id)->level) return; - snprintf(dbf_txt_buf, sizeof(dbf_txt_buf), text); + va_start(args, fmt); + vsnprintf(dbf_txt_buf, sizeof(dbf_txt_buf), fmt, args); + va_end(args); debug_text_event(qeth_dbf[dbf_nix].id, level, dbf_txt_buf); - } EXPORT_SYMBOL_GPL(qeth_dbf_longtext); -- cgit v1.2.3 From d0ec0f549705b7ecfb787f02512606b08fe5b291 Mon Sep 17 00:00:00 2001 From: Frank Blaschka Date: Fri, 6 Jun 2008 12:37:48 +0200 Subject: qeth: start dev queue after tx drop error In case the xmit function drop out with an error, we have to wake the netdevice queue to start another xmit. Signed-off-by: Frank Blaschka Signed-off-by: Martin Schwidefsky Signed-off-by: Jeff Garzik --- drivers/s390/net/qeth_l2_main.c | 1 + drivers/s390/net/qeth_l3_main.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index dd7659c8de1..f682f7b1448 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -721,6 +721,7 @@ tx_drop: if ((new_skb != skb) && new_skb) dev_kfree_skb_any(new_skb); dev_kfree_skb_any(skb); + netif_wake_queue(dev); return NETDEV_TX_OK; } diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index de256e48bfe..999552c83bb 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -2764,6 +2764,7 @@ tx_drop: if ((new_skb != skb) && new_skb) dev_kfree_skb_any(new_skb); dev_kfree_skb_any(skb); + netif_wake_queue(dev); return NETDEV_TX_OK; } -- cgit v1.2.3 From ae6b4d9ab6129467415801f30e487bc141a3f471 Mon Sep 17 00:00:00 2001 From: Jay Cliburn Date: Sun, 1 Jun 2008 16:57:11 -0500 Subject: atl1: fix suspend regression Using vendor magic to force the PHY into power save mode breaks suspend. It isn't needed anyway, so remove it. Tested-by: Avuton Olrich Signed-off-by: Jay Cliburn Signed-off-by: Jeff Garzik --- drivers/net/atlx/atl1.c | 17 ----------------- 1 file changed, 17 deletions(-) (limited to 'drivers') diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 6ddc911e7d1..99e0b4cdc56 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -636,22 +636,6 @@ static s32 atl1_phy_leave_power_saving(struct atl1_hw *hw) return atl1_write_phy_reg(hw, 30, 0); } -/* - * Force the PHY into power saving mode using vendor magic. - */ -#ifdef CONFIG_PM -static void atl1_phy_enter_power_saving(struct atl1_hw *hw) -{ - atl1_write_phy_reg(hw, MII_DBG_ADDR, 0); - atl1_write_phy_reg(hw, MII_DBG_DATA, 0x124E); - atl1_write_phy_reg(hw, MII_DBG_ADDR, 2); - atl1_write_phy_reg(hw, MII_DBG_DATA, 0x3000); - atl1_write_phy_reg(hw, MII_DBG_ADDR, 3); - atl1_write_phy_reg(hw, MII_DBG_DATA, 0); - -} -#endif - /* * Resets the PHY and make all config validate * hw - Struct containing variables accessed by shared code @@ -2860,7 +2844,6 @@ disable_wol: ctrl |= PCIE_PHYMISC_FORCE_RCV_DET; iowrite32(ctrl, hw->hw_addr + REG_PCIE_PHYMISC); ioread32(hw->hw_addr + REG_PCIE_PHYMISC); - atl1_phy_enter_power_saving(hw); hw->phy_configured = false; pci_enable_wake(pdev, pci_choose_state(pdev, state), 0); exit: -- cgit v1.2.3 From 69de8d23d10694bdd63fe715b98e1a61c56ed288 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 2 Jun 2008 10:59:02 +0100 Subject: s2io iomem annotations Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index a20693e09ae..b5c1e663417 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -2861,7 +2861,8 @@ static int s2io_poll_msix(struct napi_struct *napi, int budget) struct config_param *config; struct mac_info *mac_control; int pkts_processed = 0; - u8 *addr = NULL, val8 = 0; + u8 __iomem *addr = NULL; + u8 val8 = 0; struct s2io_nic *nic = dev->priv; struct XENA_dev_config __iomem *bar0 = nic->bar0; int budget_org = budget; @@ -2878,7 +2879,7 @@ static int s2io_poll_msix(struct napi_struct *napi, int budget) if (pkts_processed < budget_org) { netif_rx_complete(dev, napi); /*Re Enable MSI-Rx Vector*/ - addr = (u8 *)&bar0->xmsi_mask_reg; + addr = (u8 __iomem *)&bar0->xmsi_mask_reg; addr += 7 - ring->ring_no; val8 = (ring->ring_no == 0) ? 0x3f : 0xbf; writeb(val8, addr); @@ -4364,9 +4365,10 @@ static irqreturn_t s2io_msix_ring_handle(int irq, void *dev_id) return IRQ_HANDLED; if (sp->config.napi) { - u8 *addr = NULL, val8 = 0; + u8 __iomem *addr = NULL; + u8 val8 = 0; - addr = (u8 *)&bar0->xmsi_mask_reg; + addr = (u8 __iomem *)&bar0->xmsi_mask_reg; addr += (7 - ring->ring_no); val8 = (ring->ring_no == 0) ? 0x7f : 0xff; writeb(val8, addr); -- cgit v1.2.3 From 68c2889834602f6efed195f44439ef5d526683a8 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sat, 31 May 2008 16:52:52 +0100 Subject: sky2: Hold RTNL while calling dev_close() dev_close() must be called holding the RTNL. Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 3bb60530d4d..62436b3a18c 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -4404,7 +4404,9 @@ static int sky2_resume(struct pci_dev *pdev) if (err) { printk(KERN_ERR PFX "%s: could not up: %d\n", dev->name, err); + rtnl_lock(); dev_close(dev); + rtnl_unlock(); goto out; } } -- cgit v1.2.3 From 7427d8b815c7fc0b005a17cf3952b7ebef0481d2 Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Wed, 11 Jun 2008 12:08:39 +0800 Subject: smc91x: fix build error from the SMC_GET_MAC_ADDR API change Cc: Jeff Garzik Cc: Andrew Morton Signed-off-by: Bryan Wu Signed-off-by: Linus Torvalds --- drivers/net/smc91x.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index 69e97a1cb1c..8606818653f 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -93,14 +93,14 @@ #define SMC_insw(a, r, p, l) insw ((unsigned long *)((a) + (r)), p, l) # endif /* check if the mac in reg is valid */ -#define SMC_GET_MAC_ADDR(addr) \ +#define SMC_GET_MAC_ADDR(lp, addr) \ do { \ unsigned int __v; \ - __v = SMC_inw(ioaddr, ADDR0_REG); \ + __v = SMC_inw(ioaddr, ADDR0_REG(lp)); \ addr[0] = __v; addr[1] = __v >> 8; \ - __v = SMC_inw(ioaddr, ADDR1_REG); \ + __v = SMC_inw(ioaddr, ADDR1_REG(lp)); \ addr[2] = __v; addr[3] = __v >> 8; \ - __v = SMC_inw(ioaddr, ADDR2_REG); \ + __v = SMC_inw(ioaddr, ADDR2_REG(lp)); \ addr[4] = __v; addr[5] = __v >> 8; \ if (*(u32 *)(&addr[0]) == 0xFFFFFFFF) { \ random_ether_addr(addr); \ -- cgit v1.2.3 From 62cfcf4f467733a8dc218691c791804a148da887 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=BCrgen=20Schindele?= Date: Wed, 11 Jun 2008 19:56:06 +0100 Subject: [ARM] 5090/1: Correct pxafb palette typo error This patch correct a typo error in pxafb vhich is relevant for 8-bit palette framebuffer configuration. Signed-off-by: Jrgen Schindele Acked-by: Eric Miao Signed-off-by: Russell King --- drivers/video/pxafb.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 274bc93ab7d..7dcda187d9b 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -573,8 +573,8 @@ static int setup_frame_dma(struct pxafb_info *fbi, int dma, int pal, dma_desc->fdadr = fbi->dma_buff_phys + dma_desc_off; fbi->fdadr[dma] = fbi->dma_buff_phys + dma_desc_off; } else { - pal_desc = &fbi->dma_buff->pal_desc[dma]; - pal_desc_off = offsetof(struct pxafb_dma_buff, dma_desc[pal]); + pal_desc = &fbi->dma_buff->pal_desc[pal]; + pal_desc_off = offsetof(struct pxafb_dma_buff, pal_desc[pal]); pal_desc->fsadr = fbi->dma_buff_phys + pal * PALETTE_SIZE; pal_desc->fidr = 0; @@ -1276,6 +1276,8 @@ static int __init pxafb_map_video_memory(struct pxafb_info *fbi) fbi->dma_buff_phys = fbi->map_dma; fbi->palette_cpu = (u16 *) fbi->dma_buff->palette; + pr_debug("pxafb: palette_mem_size = 0x%08lx\n", fbi->palette_size*sizeof(u16)); + #ifdef CONFIG_FB_PXA_SMARTPANEL fbi->smart_cmds = (uint16_t *) fbi->dma_buff->cmd_buff; fbi->n_smart_cmds = 0; -- cgit v1.2.3 From e1094bfa26e5e94af2fea79e004614dbce42b008 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Wed, 14 May 2008 11:32:59 +0800 Subject: ACPI: Disable Fixed_RTC event when installing RTC handler The Fixed_RTC event should be disabled when installing RTC handler. Only when RTC alarm is set will it be enabled again. If it is not disabled, maybe some machines will be powered on automatically after the system is shutdown even when the RTC alarm is not set. http://bugzilla.kernel.org/show_bug.cgi?id=10010 Signed-off-by: Zhao Yakui Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/glue.c | 6 ++++++ drivers/acpi/sleep/proc.c | 6 ++++++ 2 files changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index 06f8634fe58..2808dc60fd6 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -272,6 +272,12 @@ static u32 rtc_handler(void *context) static inline void rtc_wake_setup(void) { acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, NULL); + /* + * After the RTC handler is installed, the Fixed_RTC event should + * be disabled. Only when the RTC alarm is set will it be enabled. + */ + acpi_clear_event(ACPI_EVENT_RTC); + acpi_disable_event(ACPI_EVENT_RTC, 0); } static void rtc_wake_on(struct device *dev) diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c index 8a5fe871051..224c57c0338 100644 --- a/drivers/acpi/sleep/proc.c +++ b/drivers/acpi/sleep/proc.c @@ -495,6 +495,12 @@ static int __init acpi_sleep_proc_init(void) acpi_root_dir, &acpi_system_alarm_fops); acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, NULL); + /* + * Disable the RTC event after installing RTC handler. + * Only when RTC alarm is set will it be enabled. + */ + acpi_clear_event(ACPI_EVENT_RTC); + acpi_disable_event(ACPI_EVENT_RTC, 0); #endif /* HAVE_ACPI_LEGACY_ALARM */ /* 'wakeup device' [R/W] */ -- cgit v1.2.3 From dcb84f335bee9c9a7781cfc5d74492dccaf066d2 Mon Sep 17 00:00:00 2001 From: Venkatesh Pallipadi Date: Mon, 19 May 2008 19:09:27 -0400 Subject: cpuidle acpi driver: fix oops on AC<->DC cpuidle and acpi driver interaction bug with the way cpuidle_register_driver() is called. Due to this bug, there will be oops on AC<->DC on some systems, where they support C-states in one DC and not in AC. The current code does ON BOOT: Look at CST and other C-state info to see whether more than C1 is supported. If it is, then acpi processor_idle does a cpuidle_register_driver() call, which internally enables the device. ON CST change notification (AC<->DC) and on suspend-resume: acpi driver temporarily disables device, updates the device with any new C-states, and reenables the device. The problem is is on boot, there are no C2, C3 states supported and we skip the register. Later on AC<->DC, we may get a CST notification and we try to reevaluate CST and enabled the device, without actually registering it. This causes breakage as we try to create /sys fs sub directory, without the parent directory which is created at register time. Thanks to Sanjeev for reporting the problem here. http://bugzilla.kernel.org/show_bug.cgi?id=10394 Signed-off-by: Venkatesh Pallipadi Signed-off-by: Len Brown --- drivers/acpi/processor_idle.c | 13 +++++++------ drivers/cpuidle/cpuidle.c | 40 +++++++++++++++++++++++++++++++++++----- 2 files changed, 42 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 2dd2c1f3a01..556ee158519 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -1669,6 +1669,7 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr) return -EINVAL; } + dev->cpu = pr->id; for (i = 0; i < CPUIDLE_STATE_MAX; i++) { dev->states[i].name[0] = '\0'; dev->states[i].desc[0] = '\0'; @@ -1738,7 +1739,7 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr) int acpi_processor_cst_has_changed(struct acpi_processor *pr) { - int ret; + int ret = 0; if (boot_option_idle_override) return 0; @@ -1756,8 +1757,10 @@ int acpi_processor_cst_has_changed(struct acpi_processor *pr) cpuidle_pause_and_lock(); cpuidle_disable_device(&pr->power.dev); acpi_processor_get_power_info(pr); - acpi_processor_setup_cpuidle(pr); - ret = cpuidle_enable_device(&pr->power.dev); + if (pr->flags.power) { + acpi_processor_setup_cpuidle(pr); + ret = cpuidle_enable_device(&pr->power.dev); + } cpuidle_resume_and_unlock(); return ret; @@ -1813,7 +1816,6 @@ int __cpuinit acpi_processor_power_init(struct acpi_processor *pr, if (pr->flags.power) { #ifdef CONFIG_CPU_IDLE acpi_processor_setup_cpuidle(pr); - pr->power.dev.cpu = pr->id; if (cpuidle_register_device(&pr->power.dev)) return -EIO; #endif @@ -1850,8 +1852,7 @@ int acpi_processor_power_exit(struct acpi_processor *pr, return 0; #ifdef CONFIG_CPU_IDLE - if (pr->flags.power) - cpuidle_unregister_device(&pr->power.dev); + cpuidle_unregister_device(&pr->power.dev); #endif pr->flags.power_setup_done = 0; diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index fc555a90bb2..23554b676d6 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -38,6 +38,8 @@ static void cpuidle_kick_cpus(void) static void cpuidle_kick_cpus(void) {} #endif +static int __cpuidle_register_device(struct cpuidle_device *dev); + /** * cpuidle_idle_call - the main idle loop * @@ -138,6 +140,12 @@ int cpuidle_enable_device(struct cpuidle_device *dev) if (!dev->state_count) return -EINVAL; + if (dev->registered == 0) { + ret = __cpuidle_register_device(dev); + if (ret) + return ret; + } + if ((ret = cpuidle_add_state_sysfs(dev))) return ret; @@ -232,10 +240,13 @@ static void poll_idle_init(struct cpuidle_device *dev) {} #endif /* CONFIG_ARCH_HAS_CPU_RELAX */ /** - * cpuidle_register_device - registers a CPU's idle PM feature + * __cpuidle_register_device - internal register function called before register + * and enable routines * @dev: the cpu + * + * cpuidle_lock mutex must be held before this is called */ -int cpuidle_register_device(struct cpuidle_device *dev) +static int __cpuidle_register_device(struct cpuidle_device *dev) { int ret; struct sys_device *sys_dev = get_cpu_sysdev((unsigned long)dev->cpu); @@ -247,18 +258,34 @@ int cpuidle_register_device(struct cpuidle_device *dev) init_completion(&dev->kobj_unregister); - mutex_lock(&cpuidle_lock); - poll_idle_init(dev); per_cpu(cpuidle_devices, dev->cpu) = dev; list_add(&dev->device_list, &cpuidle_detected_devices); if ((ret = cpuidle_add_sysfs(sys_dev))) { - mutex_unlock(&cpuidle_lock); module_put(cpuidle_curr_driver->owner); return ret; } + dev->registered = 1; + return 0; +} + +/** + * cpuidle_register_device - registers a CPU's idle PM feature + * @dev: the cpu + */ +int cpuidle_register_device(struct cpuidle_device *dev) +{ + int ret; + + mutex_lock(&cpuidle_lock); + + if ((ret = __cpuidle_register_device(dev))) { + mutex_unlock(&cpuidle_lock); + return ret; + } + cpuidle_enable_device(dev); cpuidle_install_idle_handler(); @@ -278,6 +305,9 @@ void cpuidle_unregister_device(struct cpuidle_device *dev) { struct sys_device *sys_dev = get_cpu_sysdev((unsigned long)dev->cpu); + if (dev->registered == 0) + return; + cpuidle_pause_and_lock(); cpuidle_disable_device(dev); -- cgit v1.2.3 From 197a2cd907e3a5278a1cfd48c86402133f38a9ba Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 3 Jun 2008 23:36:09 -0300 Subject: thinkpad-acpi: SW_RADIO to SW_RFKILL_ALL rename Rename SW_RADIO to SW_RFKILL_ALL in thinkpad-acpi code and docs, following 5adad0133907790c50283bf03271d920d6897043 "Input: rename SW_RADIO to SW_RFKILL_ALL". Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- drivers/misc/thinkpad_acpi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index a0ce0b2fa03..f81e048c987 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -1293,7 +1293,7 @@ static void tpacpi_input_send_radiosw(void) mutex_lock(&tpacpi_inputdev_send_mutex); input_report_switch(tpacpi_inputdev, - SW_RADIO, !!wlsw); + SW_RFKILL_ALL, !!wlsw); input_sync(tpacpi_inputdev); mutex_unlock(&tpacpi_inputdev_send_mutex); @@ -2199,7 +2199,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) if (tp_features.hotkey_wlsw) { set_bit(EV_SW, tpacpi_inputdev->evbit); - set_bit(SW_RADIO, tpacpi_inputdev->swbit); + set_bit(SW_RFKILL_ALL, tpacpi_inputdev->swbit); } if (tp_features.hotkey_tablet) { set_bit(EV_SW, tpacpi_inputdev->evbit); -- cgit v1.2.3 From 9c0a76e16ee6648f4bd19563e9fe12a4f4fabba1 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 3 Jun 2008 23:36:10 -0300 Subject: thinkpad-acpi: fix initialization error paths Rework some subdriver init and exit handlers, in order to fix some initialization error paths that were missing, or broken. Hitting those bugs should be extremely rare in the real world, but should that happen, thinkpad-acpi would fail to dealocate some resources and a reboot might well be needed to be able to load the driver again. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- drivers/misc/thinkpad_acpi.c | 437 +++++++++++++++++++++++-------------------- 1 file changed, 230 insertions(+), 207 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index f81e048c987..58973da1e6d 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -1921,6 +1921,29 @@ static struct attribute *hotkey_mask_attributes[] __initdata = { &dev_attr_hotkey_wakeup_hotunplug_complete.attr, }; +static void hotkey_exit(void) +{ +#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL + hotkey_poll_stop_sync(); +#endif + + if (hotkey_dev_attributes) + delete_attr_set(hotkey_dev_attributes, &tpacpi_pdev->dev.kobj); + + kfree(hotkey_keycode_map); + + if (tp_features.hotkey) { + dbg_printk(TPACPI_DBG_EXIT, + "restoring original hot key mask\n"); + /* no short-circuit boolean operator below! */ + if ((hotkey_mask_set(hotkey_orig_mask) | + hotkey_status_set(hotkey_orig_status)) != 0) + printk(TPACPI_ERR + "failed to restore hot key mask " + "to BIOS defaults\n"); + } +} + static int __init hotkey_init(struct ibm_init_struct *iibm) { /* Requirements for changing the default keymaps: @@ -2060,226 +2083,220 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) vdbg_printk(TPACPI_DBG_INIT, "hotkeys are %s\n", str_supported(tp_features.hotkey)); - if (tp_features.hotkey) { - hotkey_dev_attributes = create_attr_set(13, NULL); - if (!hotkey_dev_attributes) - return -ENOMEM; - res = add_many_to_attr_set(hotkey_dev_attributes, - hotkey_attributes, - ARRAY_SIZE(hotkey_attributes)); - if (res) - return res; + if (!tp_features.hotkey) + return 1; - /* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p, - A30, R30, R31, T20-22, X20-21, X22-24. Detected by checking - for HKEY interface version 0x100 */ - if (acpi_evalf(hkey_handle, &hkeyv, "MHKV", "qd")) { - if ((hkeyv >> 8) != 1) { - printk(TPACPI_ERR "unknown version of the " - "HKEY interface: 0x%x\n", hkeyv); - printk(TPACPI_ERR "please report this to %s\n", - TPACPI_MAIL); - } else { - /* - * MHKV 0x100 in A31, R40, R40e, - * T4x, X31, and later - */ - tp_features.hotkey_mask = 1; - } + hotkey_dev_attributes = create_attr_set(13, NULL); + if (!hotkey_dev_attributes) + return -ENOMEM; + res = add_many_to_attr_set(hotkey_dev_attributes, + hotkey_attributes, + ARRAY_SIZE(hotkey_attributes)); + if (res) + goto err_exit; + + /* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p, + A30, R30, R31, T20-22, X20-21, X22-24. Detected by checking + for HKEY interface version 0x100 */ + if (acpi_evalf(hkey_handle, &hkeyv, "MHKV", "qd")) { + if ((hkeyv >> 8) != 1) { + printk(TPACPI_ERR "unknown version of the " + "HKEY interface: 0x%x\n", hkeyv); + printk(TPACPI_ERR "please report this to %s\n", + TPACPI_MAIL); + } else { + /* + * MHKV 0x100 in A31, R40, R40e, + * T4x, X31, and later + */ + tp_features.hotkey_mask = 1; } + } - vdbg_printk(TPACPI_DBG_INIT, "hotkey masks are %s\n", - str_supported(tp_features.hotkey_mask)); + vdbg_printk(TPACPI_DBG_INIT, "hotkey masks are %s\n", + str_supported(tp_features.hotkey_mask)); - if (tp_features.hotkey_mask) { - if (!acpi_evalf(hkey_handle, &hotkey_all_mask, - "MHKA", "qd")) { - printk(TPACPI_ERR - "missing MHKA handler, " - "please report this to %s\n", - TPACPI_MAIL); - /* FN+F12, FN+F4, FN+F3 */ - hotkey_all_mask = 0x080cU; - } + if (tp_features.hotkey_mask) { + if (!acpi_evalf(hkey_handle, &hotkey_all_mask, + "MHKA", "qd")) { + printk(TPACPI_ERR + "missing MHKA handler, " + "please report this to %s\n", + TPACPI_MAIL); + /* FN+F12, FN+F4, FN+F3 */ + hotkey_all_mask = 0x080cU; } + } - /* hotkey_source_mask *must* be zero for - * the first hotkey_mask_get */ - res = hotkey_status_get(&hotkey_orig_status); - if (!res && tp_features.hotkey_mask) { - res = hotkey_mask_get(); - hotkey_orig_mask = hotkey_mask; - if (!res) { - res = add_many_to_attr_set( - hotkey_dev_attributes, - hotkey_mask_attributes, - ARRAY_SIZE(hotkey_mask_attributes)); - } - } + /* hotkey_source_mask *must* be zero for + * the first hotkey_mask_get */ + res = hotkey_status_get(&hotkey_orig_status); + if (res) + goto err_exit; + + if (tp_features.hotkey_mask) { + res = hotkey_mask_get(); + if (res) + goto err_exit; + + hotkey_orig_mask = hotkey_mask; + res = add_many_to_attr_set( + hotkey_dev_attributes, + hotkey_mask_attributes, + ARRAY_SIZE(hotkey_mask_attributes)); + if (res) + goto err_exit; + } #ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL - if (tp_features.hotkey_mask) { - hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK - & ~hotkey_all_mask; - } else { - hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK; - } + if (tp_features.hotkey_mask) { + hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK + & ~hotkey_all_mask; + } else { + hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK; + } - vdbg_printk(TPACPI_DBG_INIT, - "hotkey source mask 0x%08x, polling freq %d\n", - hotkey_source_mask, hotkey_poll_freq); + vdbg_printk(TPACPI_DBG_INIT, + "hotkey source mask 0x%08x, polling freq %d\n", + hotkey_source_mask, hotkey_poll_freq); #endif - /* Not all thinkpads have a hardware radio switch */ - if (!res && acpi_evalf(hkey_handle, &status, "WLSW", "qd")) { - tp_features.hotkey_wlsw = 1; - printk(TPACPI_INFO - "radio switch found; radios are %s\n", - enabled(status, 0)); - res = add_to_attr_set(hotkey_dev_attributes, - &dev_attr_hotkey_radio_sw.attr); - } + /* Not all thinkpads have a hardware radio switch */ + if (acpi_evalf(hkey_handle, &status, "WLSW", "qd")) { + tp_features.hotkey_wlsw = 1; + printk(TPACPI_INFO + "radio switch found; radios are %s\n", + enabled(status, 0)); + res = add_to_attr_set(hotkey_dev_attributes, + &dev_attr_hotkey_radio_sw.attr); + } - /* For X41t, X60t, X61t Tablets... */ - if (!res && acpi_evalf(hkey_handle, &status, "MHKG", "qd")) { - tp_features.hotkey_tablet = 1; - printk(TPACPI_INFO - "possible tablet mode switch found; " - "ThinkPad in %s mode\n", - (status & TP_HOTKEY_TABLET_MASK)? - "tablet" : "laptop"); - res = add_to_attr_set(hotkey_dev_attributes, - &dev_attr_hotkey_tablet_mode.attr); - } + /* For X41t, X60t, X61t Tablets... */ + if (!res && acpi_evalf(hkey_handle, &status, "MHKG", "qd")) { + tp_features.hotkey_tablet = 1; + printk(TPACPI_INFO + "possible tablet mode switch found; " + "ThinkPad in %s mode\n", + (status & TP_HOTKEY_TABLET_MASK)? + "tablet" : "laptop"); + res = add_to_attr_set(hotkey_dev_attributes, + &dev_attr_hotkey_tablet_mode.attr); + } - if (!res) - res = register_attr_set_with_sysfs( - hotkey_dev_attributes, - &tpacpi_pdev->dev.kobj); - if (res) - return res; + if (!res) + res = register_attr_set_with_sysfs( + hotkey_dev_attributes, + &tpacpi_pdev->dev.kobj); + if (res) + goto err_exit; - /* Set up key map */ + /* Set up key map */ - hotkey_keycode_map = kmalloc(TPACPI_HOTKEY_MAP_SIZE, - GFP_KERNEL); - if (!hotkey_keycode_map) { - printk(TPACPI_ERR - "failed to allocate memory for key map\n"); - return -ENOMEM; - } + hotkey_keycode_map = kmalloc(TPACPI_HOTKEY_MAP_SIZE, + GFP_KERNEL); + if (!hotkey_keycode_map) { + printk(TPACPI_ERR + "failed to allocate memory for key map\n"); + res = -ENOMEM; + goto err_exit; + } - if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) { - dbg_printk(TPACPI_DBG_INIT, - "using Lenovo default hot key map\n"); - memcpy(hotkey_keycode_map, &lenovo_keycode_map, - TPACPI_HOTKEY_MAP_SIZE); + if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) { + dbg_printk(TPACPI_DBG_INIT, + "using Lenovo default hot key map\n"); + memcpy(hotkey_keycode_map, &lenovo_keycode_map, + TPACPI_HOTKEY_MAP_SIZE); + } else { + dbg_printk(TPACPI_DBG_INIT, + "using IBM default hot key map\n"); + memcpy(hotkey_keycode_map, &ibm_keycode_map, + TPACPI_HOTKEY_MAP_SIZE); + } + + set_bit(EV_KEY, tpacpi_inputdev->evbit); + set_bit(EV_MSC, tpacpi_inputdev->evbit); + set_bit(MSC_SCAN, tpacpi_inputdev->mscbit); + tpacpi_inputdev->keycodesize = TPACPI_HOTKEY_MAP_TYPESIZE; + tpacpi_inputdev->keycodemax = TPACPI_HOTKEY_MAP_LEN; + tpacpi_inputdev->keycode = hotkey_keycode_map; + for (i = 0; i < TPACPI_HOTKEY_MAP_LEN; i++) { + if (hotkey_keycode_map[i] != KEY_RESERVED) { + set_bit(hotkey_keycode_map[i], + tpacpi_inputdev->keybit); } else { - dbg_printk(TPACPI_DBG_INIT, - "using IBM default hot key map\n"); - memcpy(hotkey_keycode_map, &ibm_keycode_map, - TPACPI_HOTKEY_MAP_SIZE); - } - - set_bit(EV_KEY, tpacpi_inputdev->evbit); - set_bit(EV_MSC, tpacpi_inputdev->evbit); - set_bit(MSC_SCAN, tpacpi_inputdev->mscbit); - tpacpi_inputdev->keycodesize = TPACPI_HOTKEY_MAP_TYPESIZE; - tpacpi_inputdev->keycodemax = TPACPI_HOTKEY_MAP_LEN; - tpacpi_inputdev->keycode = hotkey_keycode_map; - for (i = 0; i < TPACPI_HOTKEY_MAP_LEN; i++) { - if (hotkey_keycode_map[i] != KEY_RESERVED) { - set_bit(hotkey_keycode_map[i], - tpacpi_inputdev->keybit); - } else { - if (i < sizeof(hotkey_reserved_mask)*8) - hotkey_reserved_mask |= 1 << i; - } - } - - if (tp_features.hotkey_wlsw) { - set_bit(EV_SW, tpacpi_inputdev->evbit); - set_bit(SW_RFKILL_ALL, tpacpi_inputdev->swbit); - } - if (tp_features.hotkey_tablet) { - set_bit(EV_SW, tpacpi_inputdev->evbit); - set_bit(SW_TABLET_MODE, tpacpi_inputdev->swbit); + if (i < sizeof(hotkey_reserved_mask)*8) + hotkey_reserved_mask |= 1 << i; } + } - /* Do not issue duplicate brightness change events to - * userspace */ - if (!tp_features.bright_acpimode) - /* update bright_acpimode... */ - tpacpi_check_std_acpi_brightness_support(); - - if (tp_features.bright_acpimode) { - printk(TPACPI_INFO - "This ThinkPad has standard ACPI backlight " - "brightness control, supported by the ACPI " - "video driver\n"); - printk(TPACPI_NOTICE - "Disabling thinkpad-acpi brightness events " - "by default...\n"); - - /* The hotkey_reserved_mask change below is not - * necessary while the keys are at KEY_RESERVED in the - * default map, but better safe than sorry, leave it - * here as a marker of what we have to do, especially - * when we finally become able to set this at runtime - * on response to X.org requests */ - hotkey_reserved_mask |= - (1 << TP_ACPI_HOTKEYSCAN_FNHOME) - | (1 << TP_ACPI_HOTKEYSCAN_FNEND); - } + if (tp_features.hotkey_wlsw) { + set_bit(EV_SW, tpacpi_inputdev->evbit); + set_bit(SW_RFKILL_ALL, tpacpi_inputdev->swbit); + } + if (tp_features.hotkey_tablet) { + set_bit(EV_SW, tpacpi_inputdev->evbit); + set_bit(SW_TABLET_MODE, tpacpi_inputdev->swbit); + } - dbg_printk(TPACPI_DBG_INIT, - "enabling hot key handling\n"); - res = hotkey_status_set(1); - if (res) - return res; - res = hotkey_mask_set(((hotkey_all_mask | hotkey_source_mask) - & ~hotkey_reserved_mask) - | hotkey_orig_mask); - if (res < 0 && res != -ENXIO) - return res; + /* Do not issue duplicate brightness change events to + * userspace */ + if (!tp_features.bright_acpimode) + /* update bright_acpimode... */ + tpacpi_check_std_acpi_brightness_support(); - dbg_printk(TPACPI_DBG_INIT, - "legacy hot key reporting over procfs %s\n", - (hotkey_report_mode < 2) ? - "enabled" : "disabled"); + if (tp_features.bright_acpimode) { + printk(TPACPI_INFO + "This ThinkPad has standard ACPI backlight " + "brightness control, supported by the ACPI " + "video driver\n"); + printk(TPACPI_NOTICE + "Disabling thinkpad-acpi brightness events " + "by default...\n"); + + /* The hotkey_reserved_mask change below is not + * necessary while the keys are at KEY_RESERVED in the + * default map, but better safe than sorry, leave it + * here as a marker of what we have to do, especially + * when we finally become able to set this at runtime + * on response to X.org requests */ + hotkey_reserved_mask |= + (1 << TP_ACPI_HOTKEYSCAN_FNHOME) + | (1 << TP_ACPI_HOTKEYSCAN_FNEND); + } + + dbg_printk(TPACPI_DBG_INIT, "enabling hot key handling\n"); + res = hotkey_status_set(1); + if (res) { + hotkey_exit(); + return res; + } + res = hotkey_mask_set(((hotkey_all_mask | hotkey_source_mask) + & ~hotkey_reserved_mask) + | hotkey_orig_mask); + if (res < 0 && res != -ENXIO) { + hotkey_exit(); + return res; + } - tpacpi_inputdev->open = &hotkey_inputdev_open; - tpacpi_inputdev->close = &hotkey_inputdev_close; + dbg_printk(TPACPI_DBG_INIT, + "legacy hot key reporting over procfs %s\n", + (hotkey_report_mode < 2) ? + "enabled" : "disabled"); - hotkey_poll_setup_safe(1); - tpacpi_input_send_radiosw(); - tpacpi_input_send_tabletsw(); - } + tpacpi_inputdev->open = &hotkey_inputdev_open; + tpacpi_inputdev->close = &hotkey_inputdev_close; - return (tp_features.hotkey)? 0 : 1; -} + hotkey_poll_setup_safe(1); + tpacpi_input_send_radiosw(); + tpacpi_input_send_tabletsw(); -static void hotkey_exit(void) -{ -#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL - hotkey_poll_stop_sync(); -#endif + return 0; - if (tp_features.hotkey) { - dbg_printk(TPACPI_DBG_EXIT, - "restoring original hot key mask\n"); - /* no short-circuit boolean operator below! */ - if ((hotkey_mask_set(hotkey_orig_mask) | - hotkey_status_set(hotkey_orig_status)) != 0) - printk(TPACPI_ERR - "failed to restore hot key mask " - "to BIOS defaults\n"); - } +err_exit: + delete_attr_set(hotkey_dev_attributes, &tpacpi_pdev->dev.kobj); + hotkey_dev_attributes = NULL; - if (hotkey_dev_attributes) { - delete_attr_set(hotkey_dev_attributes, &tpacpi_pdev->dev.kobj); - hotkey_dev_attributes = NULL; - } + return (res < 0)? res : 1; } static void hotkey_notify(struct ibm_struct *ibm, u32 event) @@ -3319,7 +3336,7 @@ static struct tpacpi_led_classdev tpacpi_led_thinklight = { static int __init light_init(struct ibm_init_struct *iibm) { - int rc = 0; + int rc; vdbg_printk(TPACPI_DBG_INIT, "initializing light subdriver\n"); @@ -3337,20 +3354,23 @@ static int __init light_init(struct ibm_init_struct *iibm) tp_features.light_status = acpi_evalf(ec_handle, NULL, "KBLT", "qv"); - vdbg_printk(TPACPI_DBG_INIT, "light is %s\n", - str_supported(tp_features.light)); + vdbg_printk(TPACPI_DBG_INIT, "light is %s, light status is %s\n", + str_supported(tp_features.light), + str_supported(tp_features.light_status)); - if (tp_features.light) { - rc = led_classdev_register(&tpacpi_pdev->dev, - &tpacpi_led_thinklight.led_classdev); - } + if (!tp_features.light) + return 1; + + rc = led_classdev_register(&tpacpi_pdev->dev, + &tpacpi_led_thinklight.led_classdev); if (rc < 0) { tp_features.light = 0; tp_features.light_status = 0; - } else { - rc = (tp_features.light)? 0 : 1; + } else { + rc = 0; } + return rc; } @@ -3978,7 +3998,6 @@ static void led_exit(void) } kfree(tpacpi_leds); - tpacpi_leds = NULL; } static int __init led_init(struct ibm_init_struct *iibm) @@ -4802,7 +4821,6 @@ static void brightness_exit(void) vdbg_printk(TPACPI_DBG_EXIT, "calling backlight_device_unregister()\n"); backlight_device_unregister(ibm_backlight_device); - ibm_backlight_device = NULL; } } @@ -5764,11 +5782,16 @@ static int __init fan_init(struct ibm_init_struct *iibm) fan_control_access_mode != TPACPI_FAN_WR_NONE) { rc = sysfs_create_group(&tpacpi_sensors_pdev->dev.kobj, &fan_attr_group); - if (!(rc < 0)) - rc = driver_create_file(&tpacpi_hwmon_pdriver.driver, - &driver_attr_fan_watchdog); if (rc < 0) return rc; + + rc = driver_create_file(&tpacpi_hwmon_pdriver.driver, + &driver_attr_fan_watchdog); + if (rc < 0) { + sysfs_remove_group(&tpacpi_sensors_pdev->dev.kobj, + &fan_attr_group); + return rc; + } return 0; } else return 1; -- cgit v1.2.3 From 24e45bbe695719dca8c20e03d386eb6ea86526b5 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 3 Jun 2008 23:36:11 -0300 Subject: thinkpad-acpi: fix LED handling on older ThinkPads The less tested codepaths for LED handling, used on ThinkPads 570, 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 and maybe a few others, would write data to kernel memory it had no business touching, for leds number 3 and above. If one is lucky, that illegal write would cause an OOPS, but chances are it would silently corrupt a byte. The problem was introduced in commit af116101, "ACPI: thinkpad-acpi: add sysfs led class support to thinkpad leds (v3.2)". Fix the bug by refactoring the entire code to be far more obvious on what it wants to do. Also do some defensive "constification". Issue reported by Karol Lewandowski (he's an lucky guy and got an OOPS instead of silent corruption :-) ). Root cause of the OOPS identified by Adrian Bunk . Thanks, Adrian! Signed-off-by: Henrique de Moraes Holschuh Tested-by: Karol Lewandowski Signed-off-by: Len Brown --- drivers/misc/thinkpad_acpi.c | 55 ++++++++++++++++++++++---------------------- 1 file changed, 28 insertions(+), 27 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index 58973da1e6d..b5969298f3d 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -3853,7 +3853,7 @@ static const char * const tpacpi_led_names[TPACPI_LED_NUMLEDS] = { "tpacpi::standby", }; -static int led_get_status(unsigned int led) +static int led_get_status(const unsigned int led) { int status; enum led_status_t led_s; @@ -3877,41 +3877,42 @@ static int led_get_status(unsigned int led) /* not reached */ } -static int led_set_status(unsigned int led, enum led_status_t ledstatus) +static int led_set_status(const unsigned int led, + const enum led_status_t ledstatus) { /* off, on, blink. Index is led_status_t */ - static const int led_sled_arg1[] = { 0, 1, 3 }; - static const int led_exp_hlbl[] = { 0, 0, 1 }; /* led# * */ - static const int led_exp_hlcl[] = { 0, 1, 1 }; /* led# * */ - static const int led_led_arg1[] = { 0, 0x80, 0xc0 }; + static const unsigned int led_sled_arg1[] = { 0, 1, 3 }; + static const unsigned int led_led_arg1[] = { 0, 0x80, 0xc0 }; int rc = 0; switch (led_supported) { case TPACPI_LED_570: - /* 570 */ - led = 1 << led; - if (!acpi_evalf(led_handle, NULL, NULL, "vdd", - led, led_sled_arg1[ledstatus])) - rc = -EIO; - break; + /* 570 */ + if (led > 7) + return -EINVAL; + if (!acpi_evalf(led_handle, NULL, NULL, "vdd", + (1 << led), led_sled_arg1[ledstatus])) + rc = -EIO; + break; case TPACPI_LED_OLD: - /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */ - led = 1 << led; - rc = ec_write(TPACPI_LED_EC_HLMS, led); - if (rc >= 0) - rc = ec_write(TPACPI_LED_EC_HLBL, - led * led_exp_hlbl[ledstatus]); - if (rc >= 0) - rc = ec_write(TPACPI_LED_EC_HLCL, - led * led_exp_hlcl[ledstatus]); - break; + /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */ + if (led > 7) + return -EINVAL; + rc = ec_write(TPACPI_LED_EC_HLMS, (1 << led)); + if (rc >= 0) + rc = ec_write(TPACPI_LED_EC_HLBL, + (ledstatus == TPACPI_LED_BLINK) << led); + if (rc >= 0) + rc = ec_write(TPACPI_LED_EC_HLCL, + (ledstatus != TPACPI_LED_OFF) << led); + break; case TPACPI_LED_NEW: - /* all others */ - if (!acpi_evalf(led_handle, NULL, NULL, "vdd", - led, led_led_arg1[ledstatus])) - rc = -EIO; - break; + /* all others */ + if (!acpi_evalf(led_handle, NULL, NULL, "vdd", + led, led_led_arg1[ledstatus])) + rc = -EIO; + break; default: rc = -ENXIO; } -- cgit v1.2.3 From 1b7fc5aae8867046f8d3d45808309d5b7f2e036a Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Fri, 6 Jun 2008 11:49:33 -0400 Subject: ACPI: EC: Use msleep instead of udelay while waiting for event. http://bugzilla.kernel.org/show_bug.cgi?id=10724 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/ec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 0924992187e..5622aee996b 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -194,7 +194,7 @@ static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, int force_poll) while (time_before(jiffies, delay)) { if (acpi_ec_check_status(ec, event)) return 0; - udelay(ACPI_EC_UDELAY); + msleep(1); } } pr_err(PREFIX "acpi_ec_wait timeout, status = 0x%2.2x, event = %s\n", -- cgit v1.2.3 From c21d1e7f53ffd9c0f162c42e7fde07d1c45fa127 Mon Sep 17 00:00:00 2001 From: Alistair John Strachan Date: Mon, 12 May 2008 19:13:09 +0100 Subject: ACPI 2.6.26-rc2: Add missing newline to DSDT/SSDT warning message As of recently (probably 2.6.26-rc1) I've been getting the following mangling in the kernel log: [4294014.568167] ACPI: DSDT override uses original SSDTs unless "acpi_no_auto_ssdt"<6>CPU0: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz stepping 0d This is due to a missing newline character in the first message. The following patch against 2.6.26-rc2 fixes it. Please apply. Signed-off-by: Alistair John Strachan Signed-off-by: Len Brown --- drivers/acpi/tables/tbxface.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/tables/tbxface.c b/drivers/acpi/tables/tbxface.c index fb57b93c249..0e319604d3e 100644 --- a/drivers/acpi/tables/tbxface.c +++ b/drivers/acpi/tables/tbxface.c @@ -540,7 +540,7 @@ static acpi_status acpi_tb_load_namespace(void) acpi_tb_print_table_header(0, table); if (no_auto_ssdt == 0) { - printk(KERN_WARNING "ACPI: DSDT override uses original SSDTs unless \"acpi_no_auto_ssdt\""); + printk(KERN_WARNING "ACPI: DSDT override uses original SSDTs unless \"acpi_no_auto_ssdt\"\n"); } } -- cgit v1.2.3 From e9fe9e188118a0a34c6200d9b10ea6247f53592d Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 9 Jun 2008 16:52:04 -0700 Subject: pnpacpi: fix IRQ flag decoding When decoding IRQ trigger mode and polarity, it is not enough to mask by IORESOURCE_BITS because there are now additional bits defined. For example, if IORESOURCE_IRQ_SHAREABLE was set, we failed to set *triggering and *polarity at all. I can't point to a failure that this patch fixes, but bugs in this area have caused problems when resuming after suspend, for example: http://bugzilla.kernel.org/show_bug.cgi?id=6316 http://bugzilla.kernel.org/show_bug.cgi?id=9487 https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.22/+bug/152187 This is based on a patch by Tom Jaeger: http://bugzilla.kernel.org/show_bug.cgi?id=9487#c32 [rene.herman@keyaccess.nl: fix comment] Signed-off-by: Bjorn Helgaas Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/pnp/pnpacpi/rsparser.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c index 0201c8adfda..ab09fe6fe1e 100644 --- a/drivers/pnp/pnpacpi/rsparser.c +++ b/drivers/pnp/pnpacpi/rsparser.c @@ -56,9 +56,11 @@ static int irq_flags(int triggering, int polarity, int shareable) return flags; } -static void decode_irq_flags(int flag, int *triggering, int *polarity) +static void decode_irq_flags(struct pnp_dev *dev, int flags, int *triggering, + int *polarity) { - switch (flag) { + switch (flags & (IORESOURCE_IRQ_LOWLEVEL | IORESOURCE_IRQ_HIGHLEVEL | + IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE)) { case IORESOURCE_IRQ_LOWLEVEL: *triggering = ACPI_LEVEL_SENSITIVE; *polarity = ACPI_ACTIVE_LOW; @@ -75,6 +77,12 @@ static void decode_irq_flags(int flag, int *triggering, int *polarity) *triggering = ACPI_EDGE_SENSITIVE; *polarity = ACPI_ACTIVE_HIGH; break; + default: + dev_err(&dev->dev, "can't encode invalid IRQ mode %#x\n", + flags); + *triggering = ACPI_EDGE_SENSITIVE; + *polarity = ACPI_ACTIVE_HIGH; + break; } } @@ -790,7 +798,7 @@ static void pnpacpi_encode_irq(struct pnp_dev *dev, struct acpi_resource_irq *irq = &resource->data.irq; int triggering, polarity; - decode_irq_flags(p->flags & IORESOURCE_BITS, &triggering, &polarity); + decode_irq_flags(dev, p->flags, &triggering, &polarity); irq->triggering = triggering; irq->polarity = polarity; if (triggering == ACPI_EDGE_SENSITIVE) @@ -813,7 +821,7 @@ static void pnpacpi_encode_ext_irq(struct pnp_dev *dev, struct acpi_resource_extended_irq *extended_irq = &resource->data.extended_irq; int triggering, polarity; - decode_irq_flags(p->flags & IORESOURCE_BITS, &triggering, &polarity); + decode_irq_flags(dev, p->flags, &triggering, &polarity); extended_irq->producer_consumer = ACPI_CONSUMER; extended_irq->triggering = triggering; extended_irq->polarity = polarity; -- cgit v1.2.3 From a993273beae8022390e48fe9205480565ad470ab Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 9 Jun 2008 16:52:05 -0700 Subject: pnpacpi: fix shareable IRQ encode/decode When we encode IRQ resources, we should use the "shareable" flag we got from _PRS rather than guessing based on the IRQ trigger mode. This is based on a patch by Tom Jaeger: http://bugzilla.kernel.org/show_bug.cgi?id=9487#c32 Signed-off-by: Bjorn Helgaas Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/pnp/pnpacpi/rsparser.c | 27 +++++++++++++-------------- 1 file changed, 13 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c index ab09fe6fe1e..8681ff64720 100644 --- a/drivers/pnp/pnpacpi/rsparser.c +++ b/drivers/pnp/pnpacpi/rsparser.c @@ -50,14 +50,14 @@ static int irq_flags(int triggering, int polarity, int shareable) flags = IORESOURCE_IRQ_HIGHEDGE; } - if (shareable) + if (shareable == ACPI_SHARED) flags |= IORESOURCE_IRQ_SHAREABLE; return flags; } static void decode_irq_flags(struct pnp_dev *dev, int flags, int *triggering, - int *polarity) + int *polarity, int *shareable) { switch (flags & (IORESOURCE_IRQ_LOWLEVEL | IORESOURCE_IRQ_HIGHLEVEL | IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE)) { @@ -84,6 +84,11 @@ static void decode_irq_flags(struct pnp_dev *dev, int flags, int *triggering, *polarity = ACPI_ACTIVE_HIGH; break; } + + if (flags & IORESOURCE_IRQ_SHAREABLE) + *shareable = ACPI_SHARED; + else + *shareable = ACPI_EXCLUSIVE; } static void pnpacpi_parse_allocated_irqresource(struct pnp_dev *dev, @@ -796,15 +801,12 @@ static void pnpacpi_encode_irq(struct pnp_dev *dev, struct resource *p) { struct acpi_resource_irq *irq = &resource->data.irq; - int triggering, polarity; + int triggering, polarity, shareable; - decode_irq_flags(dev, p->flags, &triggering, &polarity); + decode_irq_flags(dev, p->flags, &triggering, &polarity, &shareable); irq->triggering = triggering; irq->polarity = polarity; - if (triggering == ACPI_EDGE_SENSITIVE) - irq->sharable = ACPI_EXCLUSIVE; - else - irq->sharable = ACPI_SHARED; + irq->sharable = shareable; irq->interrupt_count = 1; irq->interrupts[0] = p->start; @@ -819,16 +821,13 @@ static void pnpacpi_encode_ext_irq(struct pnp_dev *dev, struct resource *p) { struct acpi_resource_extended_irq *extended_irq = &resource->data.extended_irq; - int triggering, polarity; + int triggering, polarity, shareable; - decode_irq_flags(dev, p->flags, &triggering, &polarity); + decode_irq_flags(dev, p->flags, &triggering, &polarity, &shareable); extended_irq->producer_consumer = ACPI_CONSUMER; extended_irq->triggering = triggering; extended_irq->polarity = polarity; - if (triggering == ACPI_EDGE_SENSITIVE) - extended_irq->sharable = ACPI_EXCLUSIVE; - else - extended_irq->sharable = ACPI_SHARED; + extended_irq->sharable = shareable; extended_irq->interrupt_count = 1; extended_irq->interrupts[0] = p->start; -- cgit v1.2.3 From 36d872a370d3d10e5a7faa9dcacce744260fb13b Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 9 Jun 2008 16:52:06 -0700 Subject: PNPACPI: use _CRS IRQ descriptor length for _SRS When configuring the resources of an ACPI device, we first evaluate _CRS to get a template of resource descriptors, then fill in the specific resource values we want, and finally evaluate _SRS to actually configure the device. Some resources have optional fields, so the size of encoded descriptors varies depending on the specific values. For example, IRQ descriptors can be either two or three bytes long. The third byte contains triggering information and can be omitted if the IRQ is edge-triggered and active high. The BIOS often assumes that IRQ descriptors in the _SRS buffer use the same format as those in the _CRS buffer, so this patch enforces that constraint. The "Start Dependent Function" descriptor also has an optional byte, but we don't currently encode those descriptors, so I didn't do anything for those. I have tested this patch on a Toshiba Portege 4000. Without the patch, parport_pc claims the parallel port only if I use "pnpacpi=off". This patch makes it work with PNPACPI. This is an extension of a patch by Tom Jaeger: http://bugzilla.kernel.org/show_bug.cgi?id=9487#c42 References: http://bugzilla.kernel.org/show_bug.cgi?id=5832 Enabling ACPI Plug and Play in kernels >2.6.9 kills Parallel support http://bugzilla.kernel.org/show_bug.cgi?id=9487 buggy firmware expects four-byte IRQ resource descriptor (was: Serial port disappears after Suspend on Toshiba R25) http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=1d5b285da1893b90507b081664ac27f1a8a3dc5b related ACPICA fix Signed-off-by: Bjorn Helgaas Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/pnp/pnpacpi/rsparser.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c index 8681ff64720..46c791adb89 100644 --- a/drivers/pnp/pnpacpi/rsparser.c +++ b/drivers/pnp/pnpacpi/rsparser.c @@ -755,6 +755,9 @@ static acpi_status pnpacpi_type_resources(struct acpi_resource *res, void *data) if (pnpacpi_supported_resource(res)) { (*resource)->type = res->type; (*resource)->length = sizeof(struct acpi_resource); + if (res->type == ACPI_RESOURCE_TYPE_IRQ) + (*resource)->data.irq.descriptor_length = + res->data.irq.descriptor_length; (*resource)++; } @@ -810,10 +813,12 @@ static void pnpacpi_encode_irq(struct pnp_dev *dev, irq->interrupt_count = 1; irq->interrupts[0] = p->start; - dev_dbg(&dev->dev, " encode irq %d %s %s %s\n", (int) p->start, + dev_dbg(&dev->dev, " encode irq %d %s %s %s (%d-byte descriptor)\n", + (int) p->start, triggering == ACPI_LEVEL_SENSITIVE ? "level" : "edge", polarity == ACPI_ACTIVE_LOW ? "low" : "high", - irq->sharable == ACPI_SHARED ? "shared" : "exclusive"); + irq->sharable == ACPI_SHARED ? "shared" : "exclusive", + irq->descriptor_length); } static void pnpacpi_encode_ext_irq(struct pnp_dev *dev, -- cgit v1.2.3 From 39b8931b5cad9a7cbcd2394a40a088311e783a82 Mon Sep 17 00:00:00 2001 From: Fenghua Yu Date: Mon, 9 Jun 2008 16:48:18 -0700 Subject: ACPI: handle invalid ACPI SLIT table This is a SLIT sanity checking patch. It moves slit_valid() function to generic ACPI code and does sanity checking for both x86 and ia64. It sets up node_distance with LOCAL_DISTANCE and REMOTE_DISTANCE when hitting invalid SLIT table on ia64. It also cleans up unused variable localities in acpi_parse_slit() on x86. Signed-off-by: Fenghua Yu Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/numa.c | 31 +++++++++++++++++++++++++++---- 1 file changed, 27 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c index 5d59cb33b1a..658e5f3abae 100644 --- a/drivers/acpi/numa.c +++ b/drivers/acpi/numa.c @@ -140,19 +140,42 @@ acpi_table_print_srat_entry(struct acpi_subtable_header *header) } } +/* + * A lot of BIOS fill in 10 (= no distance) everywhere. This messes + * up the NUMA heuristics which wants the local node to have a smaller + * distance than the others. + * Do some quick checks here and only use the SLIT if it passes. + */ +static __init int slit_valid(struct acpi_table_slit *slit) +{ + int i, j; + int d = slit->locality_count; + for (i = 0; i < d; i++) { + for (j = 0; j < d; j++) { + u8 val = slit->entry[d*i + j]; + if (i == j) { + if (val != LOCAL_DISTANCE) + return 0; + } else if (val <= LOCAL_DISTANCE) + return 0; + } + } + return 1; +} + static int __init acpi_parse_slit(struct acpi_table_header *table) { struct acpi_table_slit *slit; - u32 localities; if (!table) return -EINVAL; slit = (struct acpi_table_slit *)table; - /* downcast just for %llu vs %lu for i386/ia64 */ - localities = (u32) slit->locality_count; - + if (!slit_valid(slit)) { + printk(KERN_INFO "ACPI: SLIT table looks invalid. Not used.\n"); + return -EINVAL; + } acpi_numa_slit_init(slit); return 0; -- cgit v1.2.3 From a66b34b26fe1b0983c6d91b6381df806cd98886e Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 9 Jun 2008 16:22:24 -0700 Subject: proper prototype for acpi_processor_tstate_has_changed() This patch adds a proper prototype for acpi_processor_tstate_has_changed() in include/acpi/processor.h Signed-off-by: Adrian Bunk Cc: Len Brown Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/processor_core.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 386e5aa4883..9dd0fa93b9e 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -86,7 +86,6 @@ static int acpi_processor_info_open_fs(struct inode *inode, struct file *file); static void acpi_processor_notify(acpi_handle handle, u32 event, void *data); static acpi_status acpi_processor_hotadd_init(acpi_handle handle, int *p_cpu); static int acpi_processor_handle_eject(struct acpi_processor *pr); -extern int acpi_processor_tstate_has_changed(struct acpi_processor *pr); static const struct acpi_device_id processor_device_ids[] = { -- cgit v1.2.3 From 1fdd68608614cd1e951fd93873fe5597374e8c54 Mon Sep 17 00:00:00 2001 From: Tim Pepper Date: Mon, 9 Jun 2008 16:22:25 -0700 Subject: dock.c remove trailing printk whitespace Signed-off-by: Tim Pepper Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/dock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c index fa44fb96fc3..96c542f7fde 100644 --- a/drivers/acpi/dock.c +++ b/drivers/acpi/dock.c @@ -834,7 +834,7 @@ static int dock_add(acpi_handle handle) goto dock_add_err; } - printk(KERN_INFO PREFIX "%s \n", ACPI_DOCK_DRIVER_DESCRIPTION); + printk(KERN_INFO PREFIX "%s\n", ACPI_DOCK_DRIVER_DESCRIPTION); return 0; -- cgit v1.2.3 From 7efd52a407bed6a2b02015b8ebbff7beba155392 Mon Sep 17 00:00:00 2001 From: Holger Macht Date: Mon, 9 Jun 2008 16:22:24 -0700 Subject: bay: exit if notify handler cannot be installed If acpi_install_notify_handler() for a bay device fails, the bay driver is superfluous. Most likely, another driver (like libata) is already caring about this device anyway. Furthermore, register_hotplug_dock_device(acpi_handle) from the dock driver must not be called twice with the same handler. This would result in an endless loop consuming 100% of CPU. So clean up and exit. Signed-off-by: Holger Macht Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/bay.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/bay.c b/drivers/acpi/bay.c index d2fc9416184..26038c2a2a7 100644 --- a/drivers/acpi/bay.c +++ b/drivers/acpi/bay.c @@ -301,16 +301,20 @@ static int bay_add(acpi_handle handle, int id) */ pdev->dev.uevent_suppress = 0; - if (acpi_bay_add_fs(new_bay)) { - platform_device_unregister(new_bay->pdev); - goto bay_add_err; - } - /* register for events on this device */ status = acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY, bay_notify, new_bay); if (ACPI_FAILURE(status)) { - printk(KERN_ERR PREFIX "Error installing bay notify handler\n"); + printk(KERN_INFO PREFIX "Error installing bay notify handler\n"); + platform_device_unregister(new_bay->pdev); + goto bay_add_err; + } + + if (acpi_bay_add_fs(new_bay)) { + acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY, + bay_notify); + platform_device_unregister(new_bay->pdev); + goto bay_add_err; } /* if we are on a dock station, we should register for dock -- cgit v1.2.3 From 46a21e465e506bcd4dba759a39e7ef79978a705d Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Mon, 9 Jun 2008 16:22:26 -0700 Subject: ACPI: use memory_read_from_buffer() Signed-off-by: Akinobu Mita Acked-by: Zhang Rui Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/system.c | 15 ++------------- 1 file changed, 2 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c index 769f24855eb..5bd2dec9a7a 100644 --- a/drivers/acpi/system.c +++ b/drivers/acpi/system.c @@ -77,7 +77,6 @@ static ssize_t acpi_table_show(struct kobject *kobj, container_of(bin_attr, struct acpi_table_attr, attr); struct acpi_table_header *table_header = NULL; acpi_status status; - ssize_t ret_count = count; status = acpi_get_table(table_attr->name, table_attr->instance, @@ -85,18 +84,8 @@ static ssize_t acpi_table_show(struct kobject *kobj, if (ACPI_FAILURE(status)) return -ENODEV; - if (offset >= table_header->length) { - ret_count = 0; - goto end; - } - - if (offset + ret_count > table_header->length) - ret_count = table_header->length - offset; - - memcpy(buf, ((char *)table_header) + offset, ret_count); - - end: - return ret_count; + return memory_read_from_buffer(buf, count, &offset, + table_header, table_header->length); } static void acpi_table_attr_init(struct acpi_table_attr *table_attr, -- cgit v1.2.3 From 7aa7d4336df34e32195557a1ad422627bd69ef0b Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 10 Jun 2008 13:00:32 +0800 Subject: ACPICA: Fix to allow zero-length ASL field declarations Allows null field list in Field(), BankField(), and IndexField(). 2.6.26-rc1 regression: ACPI fails to load SDT. - Dell M1530 http://bugzilla.kernel.org/show_bug.cgi?id=10606 Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/acpi/dispatcher/dsfield.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/dispatcher/dsfield.c b/drivers/acpi/dispatcher/dsfield.c index c78078315be..f988a5e7d2b 100644 --- a/drivers/acpi/dispatcher/dsfield.c +++ b/drivers/acpi/dispatcher/dsfield.c @@ -450,10 +450,6 @@ acpi_ds_init_field_objects(union acpi_parse_object *op, return_ACPI_STATUS(AE_BAD_PARAMETER); } - if (!arg) { - return_ACPI_STATUS(AE_AML_NO_OPERAND); - } - /* Creating new namespace node(s), should not already exist */ flags = ACPI_NS_NO_UPSEARCH | ACPI_NS_DONT_OPEN_SCOPE | @@ -467,6 +463,7 @@ acpi_ds_init_field_objects(union acpi_parse_object *op, /* * Walk the list of entries in the field_list + * Note: field_list can be of zero length. In this case, Arg will be NULL. */ while (arg) { /* -- cgit v1.2.3 From bc45b1d39a925b56796bebf8a397a0491489d85c Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 10 Jun 2008 14:12:50 +0800 Subject: ACPICA: Ignore ACPI table signature for Load() operator Only "SSDT" is acceptable to the ACPI spec, but tables are seen with OEMx and null sigs. Therefore, signature validation is worthless. Apparently MS ACPI accepts such signatures, ACPICA must be compatible. http://bugzilla.kernel.org/show_bug.cgi?id=10454 Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/acpi/tables/tbinstal.c | 25 +++++++------------------ 1 file changed, 7 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/tables/tbinstal.c b/drivers/acpi/tables/tbinstal.c index 402f93e1ff2..5336ce88f89 100644 --- a/drivers/acpi/tables/tbinstal.c +++ b/drivers/acpi/tables/tbinstal.c @@ -123,24 +123,13 @@ acpi_tb_add_table(struct acpi_table_desc *table_desc, } } - /* The table must be either an SSDT or a PSDT or an OEMx */ - - if (!ACPI_COMPARE_NAME(table_desc->pointer->signature, ACPI_SIG_PSDT)&& - !ACPI_COMPARE_NAME(table_desc->pointer->signature, ACPI_SIG_SSDT)&& - strncmp(table_desc->pointer->signature, "OEM", 3)) { - /* Check for a printable name */ - if (acpi_ut_valid_acpi_name( - *(u32 *) table_desc->pointer->signature)) { - ACPI_ERROR((AE_INFO, "Table has invalid signature " - "[%4.4s], must be SSDT or PSDT", - table_desc->pointer->signature)); - } else { - ACPI_ERROR((AE_INFO, "Table has invalid signature " - "(0x%8.8X), must be SSDT or PSDT", - *(u32 *) table_desc->pointer->signature)); - } - return_ACPI_STATUS(AE_BAD_SIGNATURE); - } + /* + * Originally, we checked the table signature for "SSDT" or "PSDT" here. + * Next, we added support for OEMx tables, signature "OEM". + * Valid tables were encountered with a null signature, so we've just + * given up on validating the signature, since it seems to be a waste + * of code. The original code was removed (05/2008). + */ (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES); -- cgit v1.2.3 From 0bda3f2f86e233b00b46d91b07db25dd23ec15bc Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 10 Jun 2008 14:14:17 +0800 Subject: ACPICA: Fix for Load operator, load table at the namespace root This reverts a change introduced in version 20071019. The table is now loaded at the namespace root even though this goes against the ACPI specification. This provides compatibility with other ACPI implementations. Signed-off-by: Lin Ming Signed-off-by: Bob Moore Signed-off-by: Len Brown --- drivers/acpi/executer/exconfig.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/executer/exconfig.c b/drivers/acpi/executer/exconfig.c index 24da921d13e..39d74219058 100644 --- a/drivers/acpi/executer/exconfig.c +++ b/drivers/acpi/executer/exconfig.c @@ -375,9 +375,15 @@ acpi_ex_load_op(union acpi_operand_object *obj_desc, goto cleanup; } + /* + * Add the table to the namespace. + * + * Note: We load the table objects relative to the root of the namespace. + * This appears to go against the ACPI specification, but we do it for + * compatibility with other ACPI implementations. + */ status = - acpi_ex_add_table(table_index, walk_state->scope_info->scope.node, - &ddb_handle); + acpi_ex_add_table(table_index, acpi_gbl_root_node, &ddb_handle); if (ACPI_FAILURE(status)) { /* On error, table_ptr was deallocated above */ -- cgit v1.2.3 From d52c79ace60a2e2b22455fd195ff4bc8e7afa177 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 10 Jun 2008 14:26:57 +0800 Subject: ACPICA: Fix to make _SST method optional Fixes a problem introduced in 20080514 where the status of execution of _SST is incorrectly returned to the caller. _SST is optional, and if it is AE_NOT_FOUND, the exception should be ignored. http://www.acpica.org/bugzilla/show_bug.cgi?id=716 Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/acpi/hardware/hwsleep.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/hardware/hwsleep.c b/drivers/acpi/hardware/hwsleep.c index d9937e05ec6..dba3cfbe8cb 100644 --- a/drivers/acpi/hardware/hwsleep.c +++ b/drivers/acpi/hardware/hwsleep.c @@ -223,15 +223,17 @@ acpi_status acpi_enter_sleep_state_prep(u8 sleep_state) break; } - /* Set the system indicators to show the desired sleep state. */ - + /* + * Set the system indicators to show the desired sleep state. + * _SST is an optional method (return no error if not found) + */ status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL); if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { ACPI_EXCEPTION((AE_INFO, status, "While executing method _SST")); } - return_ACPI_STATUS(status); + return_ACPI_STATUS(AE_OK); } ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep) -- cgit v1.2.3 From 8410565f540db87ca938f56f92780d251e4f157d Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 10 Jun 2008 14:29:26 +0800 Subject: ACPICA: Fix for access to deleted object Fixes problem introduced in 20080123, with fix for Unload operator. Parse tree object can be already deleted; must use the opcode within the WalkState. ACPI: kmemcheck: Caught 16-bit read from freed memory http://bugzilla.kernel.org/show_bug.cgi?id=10669 Signed-off-by: Lin Ming Signed-off-by: Bob Moore Signed-off-by: Len Brown --- drivers/acpi/parser/psargs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/parser/psargs.c b/drivers/acpi/parser/psargs.c index f1e8bf65e24..e9446377884 100644 --- a/drivers/acpi/parser/psargs.c +++ b/drivers/acpi/parser/psargs.c @@ -268,7 +268,7 @@ acpi_ps_get_next_namepath(struct acpi_walk_state *walk_state, */ if (ACPI_SUCCESS(status) && possible_method_call && (node->type == ACPI_TYPE_METHOD)) { - if (walk_state->op->common.aml_opcode == AML_UNLOAD_OP) { + if (walk_state->opcode == AML_UNLOAD_OP) { /* * acpi_ps_get_next_namestring has increased the AML pointer, * so we need to restore the saved AML pointer for method call. @@ -691,7 +691,7 @@ acpi_ps_get_next_arg(struct acpi_walk_state *walk_state, /* To support super_name arg of Unload */ - if (walk_state->op->common.aml_opcode == AML_UNLOAD_OP) { + if (walk_state->opcode == AML_UNLOAD_OP) { status = acpi_ps_get_next_namepath(walk_state, parser_state, arg, -- cgit v1.2.3 From a39a2d7c72b358c6253a2ec28e17b023b7f6f41c Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Mon, 19 May 2008 15:55:15 -0700 Subject: ACPI: Reject below-freezing temperatures as invalid critical temperatures My laptop thinks that it's a good idea to give -73C as the critical CPU temperature.... which isn't the best thing since it causes a shutdown right at bootup. Temperatures below freezing are clearly invalid critical thresholds so just reject these as such. Signed-off-by: Arjan van de Ven Acked-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/thermal.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 504385b1f21..84c795fb9b1 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -364,10 +364,17 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag) if (flag & ACPI_TRIPS_CRITICAL) { status = acpi_evaluate_integer(tz->device->handle, "_CRT", NULL, &tz->trips.critical.temperature); - if (ACPI_FAILURE(status)) { + /* + * Treat freezing temperatures as invalid as well; some + * BIOSes return really low values and cause reboots at startup. + * Below zero (Celcius) values clearly aren't right for sure.. + * ... so lets discard those as invalid. + */ + if (ACPI_FAILURE(status) || + tz->trips.critical.temperature <= 2732) { tz->trips.critical.flags.valid = 0; ACPI_EXCEPTION((AE_INFO, status, - "No critical threshold")); + "No or invalid critical threshold")); return -ENODEV; } else { tz->trips.critical.flags.valid = 1; -- cgit v1.2.3 From 3549dba2c334e82df90f5e00ff85d2a7a2cdd1af Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 6 Jun 2008 15:32:39 -0400 Subject: ACPICA: fix stray va_end() caused by mis-merge Signed-off-by: Len Brown --- drivers/acpi/utilities/utmisc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/utilities/utmisc.c b/drivers/acpi/utilities/utmisc.c index e4ba7192cd1..1f057b71db1 100644 --- a/drivers/acpi/utilities/utmisc.c +++ b/drivers/acpi/utilities/utmisc.c @@ -1048,6 +1048,7 @@ acpi_ut_exception(char *module_name, va_start(args, format); acpi_os_vprintf(format, args); acpi_os_printf(" [%X]\n", ACPI_CA_VERSION); + va_end(args); } EXPORT_SYMBOL(acpi_ut_exception); @@ -1063,7 +1064,6 @@ acpi_ut_warning(char *module_name, u32 line_number, char *format, ...) acpi_os_vprintf(format, args); acpi_os_printf(" [%X]\n", ACPI_CA_VERSION); va_end(args); - va_end(args); } void ACPI_INTERNAL_VAR_XFACE -- cgit v1.2.3 From 4623236619ff5ce233136d13ee2747c194a63591 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 4 Jun 2008 21:40:43 -0700 Subject: dev_set_name: fix missing kernel-doc Fix kernel-doc for new dev_set_name() function: Warning(lin2626-rc5//drivers/base/core.c:767): No description found for parameter 'fmt' Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/base/core.c b/drivers/base/core.c index 422cfcad486..ee0a51a3a41 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -762,6 +762,7 @@ static void device_remove_class_symlinks(struct device *dev) /** * dev_set_name - set a device name * @dev: device + * @fmt: format string for the device's name */ int dev_set_name(struct device *dev, const char *fmt, ...) { -- cgit v1.2.3 From 6460a261b5893e769a314c246faec31bbc4aad9c Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 2 Jun 2008 21:21:03 +0200 Subject: USB: fix build bug in USB_ISIGHTFW USB: fix build bug in USB_ISIGHTFW -tip tree testing found this build bug: drivers/built-in.o: In function `isight_firmware_load': isight_firmware.c:(.text+0x1ade08): undefined reference to `request_firmware' isight_firmware.c:(.text+0x1adf9c): undefined reference to `release_firmware' select FW_LOADER in USB_ISIGHTFW. From: Ingo Molnar Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index eb6c06979f3..001789c9a11 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -272,6 +272,7 @@ config USB_TEST config USB_ISIGHTFW tristate "iSight firmware loading support" depends on USB + select FW_LOADER help This driver loads firmware for USB Apple iSight cameras, allowing them to be driven by the USB video class driver available at -- cgit v1.2.3 From 62b5884875fcd4babf6c0c377046f226abbfe491 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Fri, 6 Jun 2008 12:35:15 -0700 Subject: isight_firmware: Avoid crash on loading invalid firmware Different tools generate slightly different formats of the isight firmware. Ensure that the firmware buffer is not overrun, while still ensuring that the correct amount of data is written if trailing data is present. Signed-off-by: Matthew Garrett Report-by: Justin Mattock Tested-by: Justin Mattock Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/isight_firmware.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/misc/isight_firmware.c b/drivers/usb/misc/isight_firmware.c index 390e0488553..9f30aa1f8a5 100644 --- a/drivers/usb/misc/isight_firmware.c +++ b/drivers/usb/misc/isight_firmware.c @@ -39,9 +39,12 @@ static int isight_firmware_load(struct usb_interface *intf, struct usb_device *dev = interface_to_usbdev(intf); int llen, len, req, ret = 0; const struct firmware *firmware; - unsigned char *buf; + unsigned char *buf = kmalloc(50, GFP_KERNEL); unsigned char data[4]; - char *ptr; + u8 *ptr; + + if (!buf) + return -ENOMEM; if (request_firmware(&firmware, "isight.fw", &dev->dev) != 0) { printk(KERN_ERR "Unable to load isight firmware\n"); @@ -59,7 +62,7 @@ static int isight_firmware_load(struct usb_interface *intf, goto out; } - while (1) { + while (ptr+4 <= firmware->data+firmware->size) { memcpy(data, ptr, 4); len = (data[0] << 8 | data[1]); req = (data[2] << 8 | data[3]); @@ -71,10 +74,14 @@ static int isight_firmware_load(struct usb_interface *intf, continue; for (; len > 0; req += 50) { - llen = len > 50 ? 50 : len; + llen = min(len, 50); len -= llen; - - buf = kmalloc(llen, GFP_KERNEL); + if (ptr+llen > firmware->data+firmware->size) { + printk(KERN_ERR + "Malformed isight firmware"); + ret = -ENODEV; + goto out; + } memcpy(buf, ptr, llen); ptr += llen; @@ -89,16 +96,18 @@ static int isight_firmware_load(struct usb_interface *intf, goto out; } - kfree(buf); } } + if (usb_control_msg (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, "\0", 1, 300) != 1) { printk(KERN_ERR "isight firmware loading completion failed\n"); ret = -ENODEV; } + out: + kfree(buf); release_firmware(firmware); return ret; } -- cgit v1.2.3 From e6942d633be61f1638e08c56ab8244fc9f1c61e3 Mon Sep 17 00:00:00 2001 From: Nate Case Date: Wed, 21 May 2008 16:28:20 -0500 Subject: USB: isp1760: Assign resource fields before adding hcd This fixes the bogus "io mem 0x00000000" message printed during driver init due to hcd->rsrc_start being assigned after the call to usb_add_hcd(). Signed-off-by: Nate Case Acked-by: Sebastian Siewior Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/isp1760-hcd.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index c9cec873826..65aa5ecf569 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -2207,14 +2207,14 @@ struct usb_hcd *isp1760_register(u64 res_start, u64 res_len, int irq, goto err_put; } - ret = usb_add_hcd(hcd, irq, irqflags); - if (ret) - goto err_unmap; - hcd->irq = irq; hcd->rsrc_start = res_start; hcd->rsrc_len = res_len; + ret = usb_add_hcd(hcd, irq, irqflags); + if (ret) + goto err_unmap; + return hcd; err_unmap: -- cgit v1.2.3 From 5340ba827b6269ccd2dcfd3d966626d9dd75d5d4 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 10 Jun 2008 14:59:43 -0400 Subject: USB: don't use reset-resume if drivers don't support it This patch tries to identify which devices are able to accept reset-resume handling, by checking that there is at least one interface driver bound and that all of the drivers have a reset_resume method defined. If these conditions don't hold then during resume processing, the device is logicall disconnected. This is only a temporary fix. Later on we will explicitly unbind drivers that can't handle reset-resumes. Signed-off-by: Linus Torvalds Signed-off-by: Alan Stern Cc: Oliver Neukum Cc: Pavel Machek Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 46 ++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 44 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 8eb4da332f5..94789be54ca 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -644,6 +644,48 @@ static void hub_stop(struct usb_hub *hub) #ifdef CONFIG_PM +/* Try to identify which devices need USB-PERSIST handling */ +static int persistent_device(struct usb_device *udev) +{ + int i; + int retval; + struct usb_host_config *actconfig; + + /* Explicitly not marked persistent? */ + if (!udev->persist_enabled) + return 0; + + /* No active config? */ + actconfig = udev->actconfig; + if (!actconfig) + return 0; + + /* FIXME! We should check whether it's open here or not! */ + + /* + * Check that all the interface drivers have a + * 'reset_resume' entrypoint + */ + retval = 0; + for (i = 0; i < actconfig->desc.bNumInterfaces; i++) { + struct usb_interface *intf; + struct usb_driver *driver; + + intf = actconfig->interface[i]; + if (!intf->dev.driver) + continue; + driver = to_usb_driver(intf->dev.driver); + if (!driver->reset_resume) + return 0; + /* + * We have at least one driver, and that one + * has a reset_resume method. + */ + retval = 1; + } + return retval; +} + static void hub_restart(struct usb_hub *hub, int type) { struct usb_device *hdev = hub->hdev; @@ -689,8 +731,8 @@ static void hub_restart(struct usb_hub *hub, int type) * turn off the various status changes to prevent * khubd from disconnecting it later. */ - if (udev->persist_enabled && status == 0 && - !(portstatus & USB_PORT_STAT_ENABLE)) { + if (status == 0 && !(portstatus & USB_PORT_STAT_ENABLE) && + persistent_device(udev)) { if (portchange & USB_PORT_STAT_C_ENABLE) clear_port_feature(hub->hdev, port1, USB_PORT_FEAT_C_ENABLE); -- cgit v1.2.3 From 0761248f08ccd94ddceb5454eb1ad96626b10611 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Mon, 9 Jun 2008 16:33:50 -0700 Subject: ipg: fix receivemode IPG_RM_RECEIVEMULTICAST{,HASH} in ipg_nic_set_multicast_list() The branches are dead code. even when dev->flag IFF_MULTICAST (defined 0x1000) is set, dev->flags & IFF_MULTICAST & [boolean] always evaluates to 0. Signed-off-by: Roel Kluin Cc: Francois Romieu Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/ipg.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c index 9b358f61ed7..679a0826780 100644 --- a/drivers/net/ipg.c +++ b/drivers/net/ipg.c @@ -577,12 +577,12 @@ static void ipg_nic_set_multicast_list(struct net_device *dev) /* NIC to be configured in promiscuous mode. */ receivemode = IPG_RM_RECEIVEALLFRAMES; } else if ((dev->flags & IFF_ALLMULTI) || - (dev->flags & IFF_MULTICAST & + ((dev->flags & IFF_MULTICAST) && (dev->mc_count > IPG_MULTICAST_HASHTABLE_SIZE))) { /* NIC to be configured to receive all multicast * frames. */ receivemode |= IPG_RM_RECEIVEMULTICAST; - } else if (dev->flags & IFF_MULTICAST & (dev->mc_count > 0)) { + } else if ((dev->flags & IFF_MULTICAST) && (dev->mc_count > 0)) { /* NIC to be configured to receive selected * multicast addresses. */ receivemode |= IPG_RM_RECEIVEMULTICASTHASH; -- cgit v1.2.3 From 8b9835108f68938a5f7e74fd2c0fc65da2abad92 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Mon, 9 Jun 2008 16:33:51 -0700 Subject: fec_mpc52xx: MPC52xx_MESSAGES_DEFAULT: 2nd NETIF_MSG_IFDOWN => IFUP Duplicate NETIF_MSG_IFDOWN, 2nd should be NETIF_MSG_IFUP Signed-off-by: Roel Kluin Acked-by: Sylvain Munaut Cc: Grant Likely Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/fec_mpc52xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c index 5f9c42e7a7f..329edd9c08f 100644 --- a/drivers/net/fec_mpc52xx.c +++ b/drivers/net/fec_mpc52xx.c @@ -78,7 +78,7 @@ module_param_array_named(mac, mpc52xx_fec_mac_addr, byte, NULL, 0); MODULE_PARM_DESC(mac, "six hex digits, ie. 0x1,0x2,0xc0,0x01,0xba,0xbe"); #define MPC52xx_MESSAGES_DEFAULT ( NETIF_MSG_DRV | NETIF_MSG_PROBE | \ - NETIF_MSG_LINK | NETIF_MSG_IFDOWN | NETIF_MSG_IFDOWN ) + NETIF_MSG_LINK | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP) static int debug = -1; /* the above default */ module_param(debug, int, 0); MODULE_PARM_DESC(debug, "debugging messages level"); -- cgit v1.2.3 From 208aefa2451cc1f4d87622cb9b2ca4333afa8337 Mon Sep 17 00:00:00 2001 From: Christophe Jaillet Date: Thu, 15 May 2008 23:26:22 +0200 Subject: drivers/net/r6040.c: correct bad use of round_jiffies() Compared to other places in the kernel, I think that this driver misuses the function round_jiffies. Signed-off-by: Christophe Jaillet Signed-off-by: Jeff Garzik --- drivers/net/r6040.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c index 169edc15492..858b191517b 100644 --- a/drivers/net/r6040.c +++ b/drivers/net/r6040.c @@ -733,7 +733,7 @@ static void r6040_timer(unsigned long data) } /* Timer active again */ - mod_timer(&lp->timer, jiffies + round_jiffies(HZ)); + mod_timer(&lp->timer, round_jiffies(jiffies + HZ)); } /* Read/set MAC address routines */ -- cgit v1.2.3 From 45aec1ae72fc592f231e9e73ed9ed4d10cfbc0b5 Mon Sep 17 00:00:00 2001 From: "venkatesh.pallipadi@intel.com" Date: Tue, 18 Mar 2008 17:00:22 -0700 Subject: x86: PAT export resource_wc in pci sysfs For the ranges with IORESOURCE_PREFETCH, export a new resource_wc interface in pci /sysfs along with resource (which is uncached). Signed-off-by: Venkatesh Pallipadi Signed-off-by: Suresh Siddha Acked-by: Jesse Barnes Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- drivers/pci/pci-sysfs.c | 84 ++++++++++++++++++++++++++++++++++++------------- 1 file changed, 62 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 271d41cc05a..9ec7d3977a8 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -489,13 +489,14 @@ pci_mmap_legacy_mem(struct kobject *kobj, struct bin_attribute *attr, * @kobj: kobject for mapping * @attr: struct bin_attribute for the file being mapped * @vma: struct vm_area_struct passed into the mmap + * @write_combine: 1 for write_combine mapping * * Use the regular PCI mapping routines to map a PCI resource into userspace. * FIXME: write combining? maybe automatic for prefetchable regions? */ static int pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr, - struct vm_area_struct *vma) + struct vm_area_struct *vma, int write_combine) { struct pci_dev *pdev = to_pci_dev(container_of(kobj, struct device, kobj)); @@ -518,7 +519,21 @@ pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr, vma->vm_pgoff += start >> PAGE_SHIFT; mmap_type = res->flags & IORESOURCE_MEM ? pci_mmap_mem : pci_mmap_io; - return pci_mmap_page_range(pdev, vma, mmap_type, 0); + return pci_mmap_page_range(pdev, vma, mmap_type, write_combine); +} + +static int +pci_mmap_resource_uc(struct kobject *kobj, struct bin_attribute *attr, + struct vm_area_struct *vma) +{ + return pci_mmap_resource(kobj, attr, vma, 0); +} + +static int +pci_mmap_resource_wc(struct kobject *kobj, struct bin_attribute *attr, + struct vm_area_struct *vma) +{ + return pci_mmap_resource(kobj, attr, vma, 1); } /** @@ -541,9 +556,46 @@ pci_remove_resource_files(struct pci_dev *pdev) sysfs_remove_bin_file(&pdev->dev.kobj, res_attr); kfree(res_attr); } + + res_attr = pdev->res_attr_wc[i]; + if (res_attr) { + sysfs_remove_bin_file(&pdev->dev.kobj, res_attr); + kfree(res_attr); + } } } +static int pci_create_attr(struct pci_dev *pdev, int num, int write_combine) +{ + /* allocate attribute structure, piggyback attribute name */ + int name_len = write_combine ? 13 : 10; + struct bin_attribute *res_attr; + int retval; + + res_attr = kzalloc(sizeof(*res_attr) + name_len, GFP_ATOMIC); + if (res_attr) { + char *res_attr_name = (char *)(res_attr + 1); + + if (write_combine) { + pdev->res_attr_wc[num] = res_attr; + sprintf(res_attr_name, "resource%d_wc", num); + res_attr->mmap = pci_mmap_resource_wc; + } else { + pdev->res_attr[num] = res_attr; + sprintf(res_attr_name, "resource%d", num); + res_attr->mmap = pci_mmap_resource_uc; + } + res_attr->attr.name = res_attr_name; + res_attr->attr.mode = S_IRUSR | S_IWUSR; + res_attr->size = pci_resource_len(pdev, num); + res_attr->private = &pdev->resource[num]; + retval = sysfs_create_bin_file(&pdev->dev.kobj, res_attr); + } else + retval = -ENOMEM; + + return retval; +} + /** * pci_create_resource_files - create resource files in sysfs for @dev * @dev: dev in question @@ -557,31 +609,19 @@ static int pci_create_resource_files(struct pci_dev *pdev) /* Expose the PCI resources from this device as files */ for (i = 0; i < PCI_ROM_RESOURCE; i++) { - struct bin_attribute *res_attr; /* skip empty resources */ if (!pci_resource_len(pdev, i)) continue; - /* allocate attribute structure, piggyback attribute name */ - res_attr = kzalloc(sizeof(*res_attr) + 10, GFP_ATOMIC); - if (res_attr) { - char *res_attr_name = (char *)(res_attr + 1); - - pdev->res_attr[i] = res_attr; - sprintf(res_attr_name, "resource%d", i); - res_attr->attr.name = res_attr_name; - res_attr->attr.mode = S_IRUSR | S_IWUSR; - res_attr->size = pci_resource_len(pdev, i); - res_attr->mmap = pci_mmap_resource; - res_attr->private = &pdev->resource[i]; - retval = sysfs_create_bin_file(&pdev->dev.kobj, res_attr); - if (retval) { - pci_remove_resource_files(pdev); - return retval; - } - } else { - return -ENOMEM; + retval = pci_create_attr(pdev, i, 0); + /* for prefetchable resources, create a WC mappable file */ + if (!retval && pdev->resource[i].flags & IORESOURCE_PREFETCH) + retval = pci_create_attr(pdev, i, 1); + + if (retval) { + pci_remove_resource_files(pdev); + return retval; } } return 0; -- cgit v1.2.3 From 4bb073c0e32a0862bdb5215d11af19f6c0180c98 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 12 Jun 2008 02:22:02 -0700 Subject: net: Eliminate flush_scheduled_work() calls while RTNL is held. If the RTNL is held when we invoke flush_scheduled_work() we could deadlock. One such case is linkwatch, it is a work struct which tries to grab the RTNL semaphore. The most common case are net driver ->stop() methods. The simplest conversion is to instead use cancel_{delayed_}work_sync() explicitly on the various work struct the driver uses. This is an OK transformation because these work structs are doing things like resetting the chip, restarting link negotiation, and so forth. And if we're bringing down the device, we're about to turn the chip off and reset it anways. So if we cancel a pending work event, that's fine here. Some drivers were working around this deadlock by using a msleep() polling loop of some sort, and those cases are converted to instead use cancel_{delayed_}work_sync() as well. Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 9 +-------- drivers/net/bnx2.h | 1 - drivers/net/ehea/ehea_main.c | 3 ++- drivers/net/hamradio/baycom_epp.c | 2 +- drivers/net/smc911x.c | 24 +++++------------------- drivers/net/smc91x.c | 17 +++-------------- drivers/net/tulip/tulip_core.c | 2 +- drivers/net/usb/kaweth.c | 2 +- drivers/net/wireless/hostap/hostap_main.c | 8 +++++++- 9 files changed, 21 insertions(+), 47 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 4b46e68183e..367b6d46270 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -5724,14 +5724,12 @@ bnx2_reset_task(struct work_struct *work) if (!netif_running(bp->dev)) return; - bp->in_reset_task = 1; bnx2_netif_stop(bp); bnx2_init_nic(bp); atomic_set(&bp->intr_sem, 1); bnx2_netif_start(bp); - bp->in_reset_task = 0; } static void @@ -5907,12 +5905,7 @@ bnx2_close(struct net_device *dev) struct bnx2 *bp = netdev_priv(dev); u32 reset_code; - /* Calling flush_scheduled_work() may deadlock because - * linkwatch_event() may be on the workqueue and it will try to get - * the rtnl_lock which we are holding. - */ - while (bp->in_reset_task) - msleep(1); + cancel_work_sync(&bp->reset_task); bnx2_disable_int_sync(bp); bnx2_napi_disable(bp); diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h index 1eaf5bb3d9c..2377cc13bf6 100644 --- a/drivers/net/bnx2.h +++ b/drivers/net/bnx2.h @@ -6656,7 +6656,6 @@ struct bnx2 { int current_interval; struct timer_list timer; struct work_struct reset_task; - int in_reset_task; /* Used to synchronize phy accesses. */ spinlock_t phy_lock; diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index faae01dc1c4..075fd547421 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -2605,7 +2605,8 @@ static int ehea_stop(struct net_device *dev) if (netif_msg_ifdown(port)) ehea_info("disabling port %s", dev->name); - flush_scheduled_work(); + cancel_work_sync(&port->reset_task); + mutex_lock(&port->port_lock); netif_stop_queue(dev); port_napi_disable(port); diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c index dde9c7e6408..00bc7fbb6b3 100644 --- a/drivers/net/hamradio/baycom_epp.c +++ b/drivers/net/hamradio/baycom_epp.c @@ -959,7 +959,7 @@ static int epp_close(struct net_device *dev) unsigned char tmp[1]; bc->work_running = 0; - flush_scheduled_work(); + cancel_delayed_work_sync(&bc->run_work); bc->stat = EPP_DCDBIT; tmp[0] = 0; pp->ops->epp_write_addr(pp, tmp, 1, 0); diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index 4e280020518..e2ee91a6ae7 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -136,7 +136,6 @@ struct smc911x_local { /* work queue */ struct work_struct phy_configure; - int work_pending; int tx_throttle; spinlock_t lock; @@ -960,11 +959,11 @@ static void smc911x_phy_configure(struct work_struct *work) * We should not be called if phy_type is zero. */ if (lp->phy_type == 0) - goto smc911x_phy_configure_exit_nolock; + return; if (smc911x_phy_reset(dev, phyaddr)) { printk("%s: PHY reset timed out\n", dev->name); - goto smc911x_phy_configure_exit_nolock; + return; } spin_lock_irqsave(&lp->lock, flags); @@ -1033,8 +1032,6 @@ static void smc911x_phy_configure(struct work_struct *work) smc911x_phy_configure_exit: spin_unlock_irqrestore(&lp->lock, flags); -smc911x_phy_configure_exit_nolock: - lp->work_pending = 0; } /* @@ -1356,11 +1353,8 @@ static void smc911x_timeout(struct net_device *dev) * smc911x_phy_configure() calls msleep() which calls schedule_timeout() * which calls schedule(). Hence we use a work queue. */ - if (lp->phy_type != 0) { - if (schedule_work(&lp->phy_configure)) { - lp->work_pending = 1; - } - } + if (lp->phy_type != 0) + schedule_work(&lp->phy_configure); /* We can accept TX packets again */ dev->trans_start = jiffies; @@ -1531,16 +1525,8 @@ static int smc911x_close(struct net_device *dev) if (lp->phy_type != 0) { /* We need to ensure that no calls to * smc911x_phy_configure are pending. - - * flush_scheduled_work() cannot be called because we - * are running with the netlink semaphore held (from - * devinet_ioctl()) and the pending work queue - * contains linkwatch_event() (scheduled by - * netif_carrier_off() above). linkwatch_event() also - * wants the netlink semaphore. */ - while (lp->work_pending) - schedule(); + cancel_work_sync(&lp->phy_configure); smc911x_phy_powerdown(dev, lp->mii.phy_id); } diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index a188e33484e..f2051b209da 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -1016,15 +1016,8 @@ static void smc_phy_powerdown(struct net_device *dev) /* We need to ensure that no calls to smc_phy_configure are pending. - - flush_scheduled_work() cannot be called because we are - running with the netlink semaphore held (from - devinet_ioctl()) and the pending work queue contains - linkwatch_event() (scheduled by netif_carrier_off() - above). linkwatch_event() also wants the netlink semaphore. */ - while(lp->work_pending) - yield(); + cancel_work_sync(&lp->phy_configure); bmcr = smc_phy_read(dev, phy, MII_BMCR); smc_phy_write(dev, phy, MII_BMCR, bmcr | BMCR_PDOWN); @@ -1161,7 +1154,6 @@ static void smc_phy_configure(struct work_struct *work) smc_phy_configure_exit: SMC_SELECT_BANK(lp, 2); spin_unlock_irq(&lp->lock); - lp->work_pending = 0; } /* @@ -1389,11 +1381,8 @@ static void smc_timeout(struct net_device *dev) * smc_phy_configure() calls msleep() which calls schedule_timeout() * which calls schedule(). Hence we use a work queue. */ - if (lp->phy_type != 0) { - if (schedule_work(&lp->phy_configure)) { - lp->work_pending = 1; - } - } + if (lp->phy_type != 0) + schedule_work(&lp->phy_configure); /* We can accept TX packets again */ dev->trans_start = jiffies; diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c index 55670b5eb61..af8d2c436ef 100644 --- a/drivers/net/tulip/tulip_core.c +++ b/drivers/net/tulip/tulip_core.c @@ -731,7 +731,7 @@ static void tulip_down (struct net_device *dev) void __iomem *ioaddr = tp->base_addr; unsigned long flags; - flush_scheduled_work(); + cancel_work_sync(&tp->media_work); #ifdef CONFIG_TULIP_NAPI napi_disable(&tp->napi); diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c index 0dcfc031026..7c66b052f55 100644 --- a/drivers/net/usb/kaweth.c +++ b/drivers/net/usb/kaweth.c @@ -706,7 +706,7 @@ static void kaweth_kill_urbs(struct kaweth_device *kaweth) usb_kill_urb(kaweth->rx_urb); usb_kill_urb(kaweth->tx_urb); - flush_scheduled_work(); + cancel_delayed_work_sync(&kaweth->lowmem_work); /* a scheduled work may have resubmitted, we hit them again */ diff --git a/drivers/net/wireless/hostap/hostap_main.c b/drivers/net/wireless/hostap/hostap_main.c index 20d387f6658..f7aec9309d0 100644 --- a/drivers/net/wireless/hostap/hostap_main.c +++ b/drivers/net/wireless/hostap/hostap_main.c @@ -682,7 +682,13 @@ static int prism2_close(struct net_device *dev) netif_device_detach(dev); } - flush_scheduled_work(); + cancel_work_sync(&local->reset_queue); + cancel_work_sync(&local->set_multicast_list_queue); + cancel_work_sync(&local->set_tim_queue); +#ifndef PRISM2_NO_STATION_MODES + cancel_work_sync(&local->info_queue); +#endif + cancel_work_sync(&local->comms_qual_update); module_put(local->hw_module); -- cgit v1.2.3 From f969c5672b16b857e5231ad3c78f08d8ef3305aa Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Thu, 12 Jun 2008 02:05:26 -0400 Subject: fsl-diu-db: compile fix This patch fixes a compile failure in 2.6.26-rc5-git5. The variable is expected to be called ofdev. Signed-off-by: Jeff Mahoney Signed-off-by: Linus Torvalds --- drivers/video/fsl-diu-fb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c index b50bb03cb5a..0a2785361ca 100644 --- a/drivers/video/fsl-diu-fb.c +++ b/drivers/video/fsl-diu-fb.c @@ -1320,7 +1320,7 @@ static void free_irq_local(int irq) * Power management hooks. Note that we won't be called from IRQ context, * unlike the blank functions above, so we may sleep. */ -static int fsl_diu_suspend(struct of_device *dev, pm_message_t state) +static int fsl_diu_suspend(struct of_device *ofdev, pm_message_t state) { struct fsl_diu_data *machine_data; @@ -1330,7 +1330,7 @@ static int fsl_diu_suspend(struct of_device *dev, pm_message_t state) return 0; } -static int fsl_diu_resume(struct of_device *dev) +static int fsl_diu_resume(struct of_device *ofdev) { struct fsl_diu_data *machine_data; -- cgit v1.2.3 From 81d5575a48f49f494289a1299a32e4e5e41fbf40 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 12 Jun 2008 13:51:46 -0700 Subject: PCI: fixup write combine comment in pci_mmap_resource Now that we can actually do write combining properly, there's no need to have the FIXME. Signed-off-by: Jesse Barnes --- drivers/pci/pci-sysfs.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 9ec7d3977a8..6f3c7446c32 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -492,7 +492,6 @@ pci_mmap_legacy_mem(struct kobject *kobj, struct bin_attribute *attr, * @write_combine: 1 for write_combine mapping * * Use the regular PCI mapping routines to map a PCI resource into userspace. - * FIXME: write combining? maybe automatic for prefetchable regions? */ static int pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr, -- cgit v1.2.3 From 24e3fcefb9cc61acce59ed54c00c4e4c32537de7 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Thu, 12 Jun 2008 14:30:28 -0700 Subject: bnx2x: Updating the Maintainer I would like to thank Eliezer Tamir for writing and maintaining the driver for the past two years. I will take over maintaining the bnx2x driver from now on. Signed-off-by: Eilon Greenstein Signed-off-by: Eliezer Tamir Signed-off-by: David S. Miller --- drivers/net/bnx2x.c | 5 +++-- drivers/net/bnx2x.h | 3 ++- drivers/net/bnx2x_init.h | 3 ++- 3 files changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c index 7bdb5af3595..70cba64732c 100644 --- a/drivers/net/bnx2x.c +++ b/drivers/net/bnx2x.c @@ -6,7 +6,8 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation. * - * Written by: Eliezer Tamir + * Maintained by: Eilon Greenstein + * Written by: Eliezer Tamir * Based on code from Michael Chan's bnx2 driver * UDP CSUM errata workaround by Arik Gendelman * Slowpath rework by Vladislav Zolotarov @@ -74,7 +75,7 @@ static char version[] __devinitdata = "Broadcom NetXtreme II 5771X 10Gigabit Ethernet Driver " DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; -MODULE_AUTHOR("Eliezer Tamir "); +MODULE_AUTHOR("Eliezer Tamir"); MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710 Driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_MODULE_VERSION); diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index 4f0c0d31e7c..8e68d06510a 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -6,7 +6,8 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation. * - * Written by: Eliezer Tamir + * Maintained by: Eilon Greenstein + * Written by: Eliezer Tamir * Based on code from Michael Chan's bnx2 driver */ diff --git a/drivers/net/bnx2x_init.h b/drivers/net/bnx2x_init.h index dcaecc53bdb..370686eef97 100644 --- a/drivers/net/bnx2x_init.h +++ b/drivers/net/bnx2x_init.h @@ -6,7 +6,8 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation. * - * Written by: Eliezer Tamir + * Maintained by: Eilon Greenstein + * Written by: Eliezer Tamir */ #ifndef BNX2X_INIT_H -- cgit v1.2.3 From df0bcab2c66ac876d5e80864fca5cce944a44540 Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Thu, 12 Jun 2008 15:21:26 -0700 Subject: agp: add support for Radeon Mobility 9000 chipset Addresses https://bugs.edge.launchpad.net/ubuntu/+source/linux-source-2.6.22/+bug/178634 Signed-off-by: Amit Kucheria Signed-off-by: maximilian attems Acked-by: Dave Airlie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/agp/ati-agp.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/char/agp/ati-agp.c b/drivers/char/agp/ati-agp.c index 55c97f62324..07b4d8ff56e 100644 --- a/drivers/char/agp/ati-agp.c +++ b/drivers/char/agp/ati-agp.c @@ -457,6 +457,10 @@ static struct agp_device_ids ati_agp_device_ids[] __devinitdata = .device_id = PCI_DEVICE_ID_ATI_RS300_200, .chipset_name = "IGP9100/M", }, + { + .device_id = PCI_DEVICE_ID_ATI_RS350_133, + .chipset_name = "IGP9000/M", + }, { .device_id = PCI_DEVICE_ID_ATI_RS350_200, .chipset_name = "IGP9100/M", -- cgit v1.2.3 From 630c270183133ac25bef8c8d726ac448df9b169a Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Thu, 12 Jun 2008 15:21:29 -0700 Subject: hgafb: resource management fix Release ports which are requested during detection which are not freed if there is no hga card. Otherwise there is a crash during cat /proc/ioports command. Signed-off-by: Krzysztof Helt Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/hgafb.c | 26 +++++++++++++++----------- 1 file changed, 15 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/video/hgafb.c b/drivers/video/hgafb.c index fb9e6722854..c18880d9db1 100644 --- a/drivers/video/hgafb.c +++ b/drivers/video/hgafb.c @@ -279,7 +279,7 @@ static void hga_blank(int blank_mode) static int __init hga_card_detect(void) { - int count=0; + int count = 0; void __iomem *p, *q; unsigned short p_save, q_save; @@ -303,20 +303,18 @@ static int __init hga_card_detect(void) writew(0x55aa, p); if (readw(p) == 0x55aa) count++; writew(p_save, p); - if (count != 2) { - return 0; - } + if (count != 2) + goto error; /* Ok, there is definitely a card registering at the correct * memory location, so now we do an I/O port test. */ - if (!test_hga_b(0x66, 0x0f)) { /* cursor low register */ - return 0; - } - if (!test_hga_b(0x99, 0x0f)) { /* cursor low register */ - return 0; - } + if (!test_hga_b(0x66, 0x0f)) /* cursor low register */ + goto error; + + if (!test_hga_b(0x99, 0x0f)) /* cursor low register */ + goto error; /* See if the card is a Hercules, by checking whether the vsync * bit of the status register is changing. This test lasts for @@ -331,7 +329,7 @@ static int __init hga_card_detect(void) } if (p_save == q_save) - return 0; + goto error; switch (inb_p(HGA_STATUS_PORT) & 0x70) { case 0x10: @@ -348,6 +346,12 @@ static int __init hga_card_detect(void) break; } return 1; +error: + if (release_io_ports) + release_region(0x3b0, 12); + if (release_io_port) + release_region(0x3bf, 1); + return 0; } /** -- cgit v1.2.3 From 24aac480e76c6f5d1391ac05c5e9c0eb9b0cd302 Mon Sep 17 00:00:00 2001 From: Mike Miller Date: Thu, 12 Jun 2008 15:21:34 -0700 Subject: cciss: add new hardware support Add support for the next generation of HP Smart Array SAS/SATA controllers. Shipping date is late Fall 2008. Bump the driver version to 3.6.20 to reflect the new hardware support from patch 1 of this set. Signed-off-by: Mike Miller Cc: Jens Axboe Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/block/cciss.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index e336b05fe4a..5f1e1cc6165 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -53,15 +53,16 @@ #include #define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin)) -#define DRIVER_NAME "HP CISS Driver (v 3.6.14)" -#define DRIVER_VERSION CCISS_DRIVER_VERSION(3,6,14) +#define DRIVER_NAME "HP CISS Driver (v 3.6.20)" +#define DRIVER_VERSION CCISS_DRIVER_VERSION(3, 6, 20) /* Embedded module documentation macros - see modules.h */ MODULE_AUTHOR("Hewlett-Packard Company"); -MODULE_DESCRIPTION("Driver for HP Controller SA5xxx SA6xxx version 3.6.14"); +MODULE_DESCRIPTION("Driver for HP Smart Array Controllers"); MODULE_SUPPORTED_DEVICE("HP SA5i SA5i+ SA532 SA5300 SA5312 SA641 SA642 SA6400" - " SA6i P600 P800 P400 P400i E200 E200i E500"); -MODULE_VERSION("3.6.14"); + " SA6i P600 P800 P400 P400i E200 E200i E500 P700m" + " Smart Array G2 Series SAS/SATA Controllers"); +MODULE_VERSION("3.6.20"); MODULE_LICENSE("GPL"); #include "cciss_cmd.h" @@ -90,6 +91,11 @@ static const struct pci_device_id cciss_pci_device_id[] = { {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3215}, {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3237}, {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x323D}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3241}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3243}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3245}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3247}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249}, {PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0}, {0,} @@ -123,6 +129,11 @@ static struct board_type products[] = { {0x3215103C, "Smart Array E200i", &SA5_access, 120}, {0x3237103C, "Smart Array E500", &SA5_access, 512}, {0x323D103C, "Smart Array P700m", &SA5_access, 512}, + {0x3241103C, "Smart Array P212", &SA5_access, 384}, + {0x3243103C, "Smart Array P410", &SA5_access, 384}, + {0x3245103C, "Smart Array P410i", &SA5_access, 384}, + {0x3247103C, "Smart Array P411", &SA5_access, 384}, + {0x3249103C, "Smart Array P812", &SA5_access, 384}, {0xFFFF103C, "Unknown Smart Array", &SA5_access, 120}, }; -- cgit v1.2.3 From 529a4f4ec90ffd9394fdfc22bea7a858ae343171 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Thu, 12 Jun 2008 15:21:38 -0700 Subject: rtc-at32ap700x: fix bug in at32_rtc_readalarm() alarm->pending indicates whether there's an alarm that has actually been triggered, not whether we're waiting for it. alarm->enabled indicates that. Also add missing locking around reading the RTC registers. Signed-off-by: Haavard Skinnemoen Signed-off-by: Alessandro Zummo Cc: Hans-Christian Egtvedt Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-at32ap700x.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/rtc/rtc-at32ap700x.c b/drivers/rtc/rtc-at32ap700x.c index 42244f14b41..2ef8cdfda4a 100644 --- a/drivers/rtc/rtc-at32ap700x.c +++ b/drivers/rtc/rtc-at32ap700x.c @@ -94,8 +94,11 @@ static int at32_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) { struct rtc_at32ap700x *rtc = dev_get_drvdata(dev); + spin_lock_irq(&rtc->lock); rtc_time_to_tm(rtc->alarm_time, &alrm->time); - alrm->pending = rtc_readl(rtc, IMR) & RTC_BIT(IMR_TOPI) ? 1 : 0; + alrm->enabled = rtc_readl(rtc, IMR) & RTC_BIT(IMR_TOPI) ? 1 : 0; + alrm->pending = rtc_readl(rtc, ISR) & RTC_BIT(ISR_TOPI) ? 1 : 0; + spin_unlock_irq(&rtc->lock); return 0; } @@ -119,7 +122,7 @@ static int at32_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) spin_lock_irq(&rtc->lock); rtc->alarm_time = alarm_unix_time; rtc_writel(rtc, TOP, rtc->alarm_time); - if (alrm->pending) + if (alrm->enabled) rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL) | RTC_BIT(CTRL_TOPEN)); else -- cgit v1.2.3 From cef33400d0349fb24b6f8b7dea79b66e3144fd8b Mon Sep 17 00:00:00 2001 From: Chuck Ebbert Date: Thu, 12 Jun 2008 15:21:42 -0700 Subject: mmc: wbsd: initialize tasklets before requesting interrupt With CONFIG_DEBUG_SHIRQ set we will get an interrupt as soon as we allocate one. Tasklets may be scheduled in the interrupt handler but they will be initialized after the handler returns, causing a BUG() in kernel/softirq.c when they run. Should fix this Fedora bug report: https://bugzilla.redhat.com/show_bug.cgi?id=449817 Signed-off-by: Chuck Ebbert Acked-by: Pierre Ossman Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mmc/host/wbsd.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c index be624a049c6..c303e7f57ab 100644 --- a/drivers/mmc/host/wbsd.c +++ b/drivers/mmc/host/wbsd.c @@ -1457,17 +1457,7 @@ static int __devinit wbsd_request_irq(struct wbsd_host *host, int irq) int ret; /* - * Allocate interrupt. - */ - - ret = request_irq(irq, wbsd_irq, IRQF_SHARED, DRIVER_NAME, host); - if (ret) - return ret; - - host->irq = irq; - - /* - * Set up tasklets. + * Set up tasklets. Must be done before requesting interrupt. */ tasklet_init(&host->card_tasklet, wbsd_tasklet_card, (unsigned long)host); @@ -1480,6 +1470,15 @@ static int __devinit wbsd_request_irq(struct wbsd_host *host, int irq) tasklet_init(&host->finish_tasklet, wbsd_tasklet_finish, (unsigned long)host); + /* + * Allocate interrupt. + */ + ret = request_irq(irq, wbsd_irq, IRQF_SHARED, DRIVER_NAME, host); + if (ret) + return ret; + + host->irq = irq; + return 0; } -- cgit v1.2.3 From 093a44e71aa29157fb1611b00507d67c954099d6 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Thu, 12 Jun 2008 15:21:43 -0700 Subject: drivers/isdn/sc/ioctl.c: add missing kfree spid has been allocated in this function and so should be freed before leaving it, as in the other error handling cases. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) @r exists@ expression E,E1; statement S; position p1,p2,p3; @@ E =@p1 \(kmalloc\|kcalloc\|kzalloc\)(...) ... when != E = E1 if (E == NULL || ...) S ... when != E = E1 if@p2 (...) { ... when != kfree(E) } ... when != E = E1 kfree@p3(E); @forall@ position r.p2; expression r.E; int E1 != 0; @@ * if@p2 (...) { ... when != kfree(E) when strict return E1; } Signed-off-by: Julia Lawall Cc: Karsten Keil Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/isdn/sc/ioctl.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/isdn/sc/ioctl.c b/drivers/isdn/sc/ioctl.c index 7817d224492..1081091bbfa 100644 --- a/drivers/isdn/sc/ioctl.c +++ b/drivers/isdn/sc/ioctl.c @@ -226,6 +226,7 @@ int sc_ioctl(int card, scs_ioctl *data) */ if (copy_from_user(spid, data->dataptr, SCIOC_SPIDSIZE)) { kfree(rcvmsg); + kfree(spid); return -EFAULT; } -- cgit v1.2.3 From c97aee9ba43d60ff20d955065d29b6d3d8c950d5 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Thu, 12 Jun 2008 15:21:45 -0700 Subject: intel_rng: make device not found a warning Since many distros load this driver by default (throw it against the wall and see what sticks method). Change the error message severity level to avoid alarming users. Isn't it annoying when users actually read the error logs... Signed-off-by: Stephen Hemminger Cc: Michael Buesch Acked-by: Jan Beulich Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/hw_random/intel-rng.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/hw_random/intel-rng.c b/drivers/char/hw_random/intel-rng.c index 5cc651ef75e..27fdc086649 100644 --- a/drivers/char/hw_random/intel-rng.c +++ b/drivers/char/hw_random/intel-rng.c @@ -273,7 +273,7 @@ static int __init intel_rng_hw_init(void *_intel_rng_hw) if (mfc != INTEL_FWH_MANUFACTURER_CODE || (dvc != INTEL_FWH_DEVICE_CODE_8M && dvc != INTEL_FWH_DEVICE_CODE_4M)) { - printk(KERN_ERR PFX "FWH not detected\n"); + printk(KERN_NOTICE PFX "FWH not detected\n"); return -ENODEV; } -- cgit v1.2.3 From e59b6a5ab51f6192cbe20d4f031335fe6d0e73fd Mon Sep 17 00:00:00 2001 From: Philippe De Muyter Date: Thu, 12 Jun 2008 15:21:45 -0700 Subject: drivers/video/cirrusfb: fix RAM address printk In the cirrusfb driver, the RAM address printk has a superfluous 'x' that could be interpreted as "don't care", while it is actually a typo. Fix that. [akpm@linux-foundation.org: join the two printk strings to make it atomic] Signed-off-by: Philippe De Muyter Cc: Jiri Slaby Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/cirrusfb.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c index 35ac9d956b3..c14b2435d23 100644 --- a/drivers/video/cirrusfb.c +++ b/drivers/video/cirrusfb.c @@ -2432,9 +2432,9 @@ static int cirrusfb_pci_register(struct pci_dev *pdev, info->screen_size = board_size; cinfo->unmap = cirrusfb_pci_unmap; - printk(KERN_INFO " RAM (%lu kB) at 0xx%lx, ", - info->screen_size >> 10, board_addr); - printk(KERN_INFO "Cirrus Logic chipset on PCI bus\n"); + printk(KERN_INFO "RAM (%lu kB) at 0x%lx, Cirrus " + "Logic chipset on PCI bus\n", + info->screen_size >> 10, board_addr); pci_set_drvdata(pdev, info); ret = cirrusfb_register(info); -- cgit v1.2.3 From cfc53f65f56f9f33c0cf522124045ac5a64076b3 Mon Sep 17 00:00:00 2001 From: Philippe De Muyter Date: Thu, 12 Jun 2008 15:21:46 -0700 Subject: driver/char/generic_nvram: fix banner The generic nvram driver announces itself as 'Macintosh non-volatile memory driver' instead of 'Generic non-volatile memory driver'. Fix that. Signed-off-by: Philippe De Muyter Cc: Benjamin Herrenschmidt Cc: Arjan van de Ven Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/generic_nvram.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/generic_nvram.c b/drivers/char/generic_nvram.c index 2398e864c28..a00869c650d 100644 --- a/drivers/char/generic_nvram.c +++ b/drivers/char/generic_nvram.c @@ -133,7 +133,7 @@ static struct miscdevice nvram_dev = { int __init nvram_init(void) { - printk(KERN_INFO "Macintosh non-volatile memory driver v%s\n", + printk(KERN_INFO "Generic non-volatile memory driver v%s\n", NVRAM_VERSION); return misc_register(&nvram_dev); } -- cgit v1.2.3 From d2187ebd84c7dd13ef269e9600f4daebeb02816e Mon Sep 17 00:00:00 2001 From: Jiri Bohac Date: Thu, 12 Jun 2008 15:21:51 -0700 Subject: console keyboard mapping broken by 04c71976 Several console keyboard maps are broken since commit 04c71976500352d02f60616d2b960267d8c5fe24 Author: Samuel Thibault Date: Tue Oct 16 23:27:04 2007 -0700 unicode diacritics support because that changeset made k_self consider the value as a latin1 character when in Unicode mode, which is wrong; k_self should still take the console map into account. Signed-off-by: Samuel Thibault Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/keyboard.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c index 7f7e798c138..d9a0a53c842 100644 --- a/drivers/char/keyboard.c +++ b/drivers/char/keyboard.c @@ -677,12 +677,7 @@ static void k_deadunicode(struct vc_data *vc, unsigned int value, char up_flag) static void k_self(struct vc_data *vc, unsigned char value, char up_flag) { - unsigned int uni; - if (kbd->kbdmode == VC_UNICODE) - uni = value; - else - uni = conv_8bit_to_uni(value); - k_unicode(vc, uni, up_flag); + k_unicode(vc, conv_8bit_to_uni(value), up_flag); } static void k_dead2(struct vc_data *vc, unsigned char value, char up_flag) -- cgit v1.2.3 From 1da2e3d679a8ea2d9e82040359a706da0bd3bef6 Mon Sep 17 00:00:00 2001 From: Stas Sergeev Date: Thu, 12 Jun 2008 15:21:54 -0700 Subject: provide rtc_cmos platform device Recently (around 2.6.25) I've noticed that RTC no longer works for me. It turned out this is because I use pnpacpi=off kernel option to work around the parport_pc bugs. I always did so, but RTC used to work fine in the past, and now it have regressed. The patch fixes the problem by creating the platform device for the RTC when PNP is disabled. This may also help running the PNP-enabled kernel on an older PCs. Signed-off-by: Stas Sergeev Cc: David Brownell Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Bjorn Helgaas Cc: Adam Belay Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-cmos.c | 31 ++++++++++++++++--------------- 1 file changed, 16 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index d060a06ce05..d7bb9bac71d 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -905,19 +905,7 @@ static struct pnp_driver cmos_pnp_driver = { .resume = cmos_pnp_resume, }; -static int __init cmos_init(void) -{ - return pnp_register_driver(&cmos_pnp_driver); -} -module_init(cmos_init); - -static void __exit cmos_exit(void) -{ - pnp_unregister_driver(&cmos_pnp_driver); -} -module_exit(cmos_exit); - -#else /* no PNP */ +#endif /* CONFIG_PNP */ /*----------------------------------------------------------------*/ @@ -958,20 +946,33 @@ static struct platform_driver cmos_platform_driver = { static int __init cmos_init(void) { +#ifdef CONFIG_PNP + if (pnp_platform_devices) + return pnp_register_driver(&cmos_pnp_driver); + else + return platform_driver_probe(&cmos_platform_driver, + cmos_platform_probe); +#else return platform_driver_probe(&cmos_platform_driver, cmos_platform_probe); +#endif /* CONFIG_PNP */ } module_init(cmos_init); static void __exit cmos_exit(void) { +#ifdef CONFIG_PNP + if (pnp_platform_devices) + pnp_unregister_driver(&cmos_pnp_driver); + else + platform_driver_unregister(&cmos_platform_driver); +#else platform_driver_unregister(&cmos_platform_driver); +#endif /* CONFIG_PNP */ } module_exit(cmos_exit); -#endif /* !PNP */ - MODULE_AUTHOR("David Brownell"); MODULE_DESCRIPTION("Driver for PC-style 'CMOS' RTCs"); MODULE_LICENSE("GPL"); -- cgit v1.2.3 From e6d2bb2bacb43ff03b0f458108d71981d58e775a Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 12 Jun 2008 15:21:55 -0700 Subject: rtc: make HPET_RTC_IRQ track HPET_EMULATE_RTC More Kconfig tweaks related to the legacy PC RTC code: - Describe the legacy PC RTC driver as such ... it's never quite been clear that this driver is for PC RTCs, and now it's fair to call this the "legacy" driver. - Force it to understand about HPET stealing its IRQs ... kernel code does this always when HPET is in use, there should be no option for users to goof up the config. This seems to fix kernel bugzilla #10729. Signed-off-by: David Brownell Cc: Maxim Levitsky Cc: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/Kconfig | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index d307bf26af5..2d854bb9373 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -749,7 +749,7 @@ config NVRAM if RTC_LIB=n config RTC - tristate "Enhanced Real Time Clock Support" + tristate "Enhanced Real Time Clock Support (legacy PC RTC driver)" depends on !PPC && !PARISC && !IA64 && !M68K && !SPARC && !FRV \ && !ARM && !SUPERH && !S390 && !AVR32 ---help--- @@ -1036,9 +1036,9 @@ config HPET non-periodic and/or periodic. config HPET_RTC_IRQ - bool "HPET Control RTC IRQ" if !HPET_EMULATE_RTC - default n - depends on HPET + bool + default HPET_EMULATE_RTC + depends on RTC && HPET help If you say Y here, you will disable RTC_IRQ in drivers/char/rtc.c. It is assumed the platform called hpet_alloc with the RTC IRQ values for -- cgit v1.2.3 From c6d8f400cc7610f04177f81168c19b8407cb48c3 Mon Sep 17 00:00:00 2001 From: Sergey Lapin Date: Thu, 12 Jun 2008 15:21:55 -0700 Subject: rtc: Ramtron FM3130 RTC support Ramtron FM3130 is a chip with two separate devices inside, RTC clock and FRAM. This driver provides only RTC functionality. This chip is met in lots of custom boards with AT91SAMXXXX CPU I work with, is cheap and in no way better or worse than any other RTC on market. While it is mostly met on much smaller devices, I think it is great to have it supported in Linux. Signed-off-by: Sergey Lapin Signed-off-by: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/Kconfig | 11 ++ drivers/rtc/Makefile | 3 +- drivers/rtc/rtc-fm3130.c | 501 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 514 insertions(+), 1 deletion(-) create mode 100644 drivers/rtc/rtc-fm3130.c (limited to 'drivers') diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 60f8afc7a56..4949dc4859b 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -256,6 +256,17 @@ config RTC_DRV_S35390A This driver can also be built as a module. If so the module will be called rtc-s35390a. +config RTC_DRV_FM3130 + tristate "Ramtron FM3130" + help + If you say Y here you will get support for the + Ramtron FM3130 RTC chips. + Ramtron FM3130 is a chip with two separate devices inside, + RTC clock and FRAM. This driver provides only RTC functionality. + + This driver can also be built as a module. If so the module + will be called rtc-fm3130. + endif # I2C comment "SPI RTC drivers" diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index ebe871cf16c..b6e14d51670 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_RTC_DRV_DS1553) += rtc-ds1553.o obj-$(CONFIG_RTC_DRV_DS1672) += rtc-ds1672.o obj-$(CONFIG_RTC_DRV_DS1742) += rtc-ds1742.o obj-$(CONFIG_RTC_DRV_EP93XX) += rtc-ep93xx.o +obj-$(CONFIG_RTC_DRV_FM3130) += rtc-fm3130.o obj-$(CONFIG_RTC_DRV_ISL1208) += rtc-isl1208.o obj-$(CONFIG_RTC_DRV_M41T80) += rtc-m41t80.o obj-$(CONFIG_RTC_DRV_M48T59) += rtc-m48t59.o @@ -41,6 +42,7 @@ obj-$(CONFIG_RTC_DRV_OMAP) += rtc-omap.o obj-$(CONFIG_RTC_DRV_PCF8563) += rtc-pcf8563.o obj-$(CONFIG_RTC_DRV_PCF8583) += rtc-pcf8583.o obj-$(CONFIG_RTC_DRV_PL031) += rtc-pl031.o +obj-$(CONFIG_RTC_DRV_PPC) += rtc-ppc.o obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5c313.o obj-$(CONFIG_RTC_DRV_RS5C348) += rtc-rs5c348.o @@ -54,4 +56,3 @@ obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o obj-$(CONFIG_RTC_DRV_V3020) += rtc-v3020.o obj-$(CONFIG_RTC_DRV_VR41XX) += rtc-vr41xx.o obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o -obj-$(CONFIG_RTC_DRV_PPC) += rtc-ppc.o diff --git a/drivers/rtc/rtc-fm3130.c b/drivers/rtc/rtc-fm3130.c new file mode 100644 index 00000000000..11644c8fca8 --- /dev/null +++ b/drivers/rtc/rtc-fm3130.c @@ -0,0 +1,501 @@ +/* + * rtc-fm3130.c - RTC driver for Ramtron FM3130 I2C chip. + * + * Copyright (C) 2008 Sergey Lapin + * Based on ds1307 driver by James Chapman and David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +#define FM3130_RTC_CONTROL (0x0) +#define FM3130_CAL_CONTROL (0x1) +#define FM3130_RTC_SECONDS (0x2) +#define FM3130_RTC_MINUTES (0x3) +#define FM3130_RTC_HOURS (0x4) +#define FM3130_RTC_DAY (0x5) +#define FM3130_RTC_DATE (0x6) +#define FM3130_RTC_MONTHS (0x7) +#define FM3130_RTC_YEARS (0x8) + +#define FM3130_ALARM_SECONDS (0x9) +#define FM3130_ALARM_MINUTES (0xa) +#define FM3130_ALARM_HOURS (0xb) +#define FM3130_ALARM_DATE (0xc) +#define FM3130_ALARM_MONTHS (0xd) +#define FM3130_ALARM_WP_CONTROL (0xe) + +#define FM3130_CAL_CONTROL_BIT_nOSCEN (1 << 7) /* Osciallator enabled */ +#define FM3130_RTC_CONTROL_BIT_LB (1 << 7) /* Low battery */ +#define FM3130_RTC_CONTROL_BIT_AF (1 << 6) /* Alarm flag */ +#define FM3130_RTC_CONTROL_BIT_CF (1 << 5) /* Century overflow */ +#define FM3130_RTC_CONTROL_BIT_POR (1 << 4) /* Power on reset */ +#define FM3130_RTC_CONTROL_BIT_AEN (1 << 3) /* Alarm enable */ +#define FM3130_RTC_CONTROL_BIT_CAL (1 << 2) /* Calibration mode */ +#define FM3130_RTC_CONTROL_BIT_WRITE (1 << 1) /* W=1 -> write mode W=0 normal */ +#define FM3130_RTC_CONTROL_BIT_READ (1 << 0) /* R=1 -> read mode R=0 normal */ + +#define FM3130_CLOCK_REGS 7 +#define FM3130_ALARM_REGS 5 + +struct fm3130 { + u8 reg_addr_time; + u8 reg_addr_alarm; + u8 regs[15]; + struct i2c_msg msg[4]; + struct i2c_client *client; + struct rtc_device *rtc; + int data_valid; + int alarm; +}; +static const struct i2c_device_id fm3130_id[] = { + { "fm3130-rtc", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, fm3130_id); + +#define FM3130_MODE_NORMAL 0 +#define FM3130_MODE_WRITE 1 +#define FM3130_MODE_READ 2 + +static void fm3130_rtc_mode(struct device *dev, int mode) +{ + struct fm3130 *fm3130 = dev_get_drvdata(dev); + + fm3130->regs[FM3130_RTC_CONTROL] = + i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL); + switch (mode) { + case FM3130_MODE_NORMAL: + fm3130->regs[FM3130_RTC_CONTROL] &= + ~(FM3130_RTC_CONTROL_BIT_WRITE | + FM3130_RTC_CONTROL_BIT_READ); + break; + case FM3130_MODE_WRITE: + fm3130->regs[FM3130_RTC_CONTROL] |= FM3130_RTC_CONTROL_BIT_WRITE; + break; + case FM3130_MODE_READ: + fm3130->regs[FM3130_RTC_CONTROL] |= FM3130_RTC_CONTROL_BIT_READ; + break; + default: + dev_dbg(dev, "invalid mode %d\n", mode); + break; + } + /* Checking for alarm */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) { + fm3130->alarm = 1; + fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF; + } + i2c_smbus_write_byte_data(fm3130->client, + FM3130_RTC_CONTROL, fm3130->regs[FM3130_RTC_CONTROL]); +} + +static int fm3130_get_time(struct device *dev, struct rtc_time *t) +{ + struct fm3130 *fm3130 = dev_get_drvdata(dev); + int tmp; + + if (!fm3130->data_valid) { + /* We have invalid data in RTC, probably due + to battery faults or other problems. Return EIO + for now, it will allow us to set data later insted + of error during probing which disables device */ + return -EIO; + } + fm3130_rtc_mode(dev, FM3130_MODE_READ); + + /* read the RTC date and time registers all at once */ + tmp = i2c_transfer(to_i2c_adapter(fm3130->client->dev.parent), + fm3130->msg, 2); + if (tmp != 2) { + dev_err(dev, "%s error %d\n", "read", tmp); + return -EIO; + } + + fm3130_rtc_mode(dev, FM3130_MODE_NORMAL); + + dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x %02x" + "%02x %02x %02x %02x %02x %02x %02x\n", + "read", + fm3130->regs[0], fm3130->regs[1], + fm3130->regs[2], fm3130->regs[3], + fm3130->regs[4], fm3130->regs[5], + fm3130->regs[6], fm3130->regs[7], + fm3130->regs[8], fm3130->regs[9], + fm3130->regs[0xa], fm3130->regs[0xb], + fm3130->regs[0xc], fm3130->regs[0xd], + fm3130->regs[0xe]); + + t->tm_sec = BCD2BIN(fm3130->regs[FM3130_RTC_SECONDS] & 0x7f); + t->tm_min = BCD2BIN(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f); + tmp = fm3130->regs[FM3130_RTC_HOURS] & 0x3f; + t->tm_hour = BCD2BIN(tmp); + t->tm_wday = BCD2BIN(fm3130->regs[FM3130_RTC_DAY] & 0x07) - 1; + t->tm_mday = BCD2BIN(fm3130->regs[FM3130_RTC_DATE] & 0x3f); + tmp = fm3130->regs[FM3130_RTC_MONTHS] & 0x1f; + t->tm_mon = BCD2BIN(tmp) - 1; + + /* assume 20YY not 19YY, and ignore CF bit */ + t->tm_year = BCD2BIN(fm3130->regs[FM3130_RTC_YEARS]) + 100; + + dev_dbg(dev, "%s secs=%d, mins=%d, " + "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", + "read", t->tm_sec, t->tm_min, + t->tm_hour, t->tm_mday, + t->tm_mon, t->tm_year, t->tm_wday); + + /* initial clock setting can be undefined */ + return rtc_valid_tm(t); +} + + +static int fm3130_set_time(struct device *dev, struct rtc_time *t) +{ + struct fm3130 *fm3130 = dev_get_drvdata(dev); + int tmp, i; + u8 *buf = fm3130->regs; + + dev_dbg(dev, "%s secs=%d, mins=%d, " + "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", + "write", t->tm_sec, t->tm_min, + t->tm_hour, t->tm_mday, + t->tm_mon, t->tm_year, t->tm_wday); + + /* first register addr */ + buf[FM3130_RTC_SECONDS] = BIN2BCD(t->tm_sec); + buf[FM3130_RTC_MINUTES] = BIN2BCD(t->tm_min); + buf[FM3130_RTC_HOURS] = BIN2BCD(t->tm_hour); + buf[FM3130_RTC_DAY] = BIN2BCD(t->tm_wday + 1); + buf[FM3130_RTC_DATE] = BIN2BCD(t->tm_mday); + buf[FM3130_RTC_MONTHS] = BIN2BCD(t->tm_mon + 1); + + /* assume 20YY not 19YY */ + tmp = t->tm_year - 100; + buf[FM3130_RTC_YEARS] = BIN2BCD(tmp); + + dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x" + "%02x %02x %02x %02x %02x %02x %02x %02x\n", + "write", buf[0], buf[1], buf[2], buf[3], + buf[4], buf[5], buf[6], buf[7], + buf[8], buf[9], buf[0xa], buf[0xb], + buf[0xc], buf[0xd], buf[0xe]); + + fm3130_rtc_mode(dev, FM3130_MODE_WRITE); + + /* Writing time registers, we don't support multibyte transfers */ + for (i = 0; i < FM3130_CLOCK_REGS; i++) { + i2c_smbus_write_byte_data(fm3130->client, + FM3130_RTC_SECONDS + i, + fm3130->regs[FM3130_RTC_SECONDS + i]); + } + + fm3130_rtc_mode(dev, FM3130_MODE_NORMAL); + + /* We assume here that data are valid once written */ + if (!fm3130->data_valid) + fm3130->data_valid = 1; + return 0; +} + +static int fm3130_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct fm3130 *fm3130 = dev_get_drvdata(dev); + int tmp; + struct rtc_time *tm = &alrm->time; + /* read the RTC alarm registers all at once */ + tmp = i2c_transfer(to_i2c_adapter(fm3130->client->dev.parent), + &fm3130->msg[2], 2); + if (tmp != 2) { + dev_err(dev, "%s error %d\n", "read", tmp); + return -EIO; + } + dev_dbg(dev, "alarm read %02x %02x %02x %02x %02x\n", + fm3130->regs[FM3130_ALARM_SECONDS], + fm3130->regs[FM3130_ALARM_MINUTES], + fm3130->regs[FM3130_ALARM_HOURS], + fm3130->regs[FM3130_ALARM_DATE], + fm3130->regs[FM3130_ALARM_MONTHS]); + + + tm->tm_sec = BCD2BIN(fm3130->regs[FM3130_ALARM_SECONDS] & 0x7F); + tm->tm_min = BCD2BIN(fm3130->regs[FM3130_ALARM_MINUTES] & 0x7F); + tm->tm_hour = BCD2BIN(fm3130->regs[FM3130_ALARM_HOURS] & 0x3F); + tm->tm_mday = BCD2BIN(fm3130->regs[FM3130_ALARM_DATE] & 0x3F); + tm->tm_mon = BCD2BIN(fm3130->regs[FM3130_ALARM_MONTHS] & 0x1F); + if (tm->tm_mon > 0) + tm->tm_mon -= 1; /* RTC is 1-12, tm_mon is 0-11 */ + dev_dbg(dev, "%s secs=%d, mins=%d, " + "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", + "read alarm", tm->tm_sec, tm->tm_min, + tm->tm_hour, tm->tm_mday, + tm->tm_mon, tm->tm_year, tm->tm_wday); + + return 0; +} + +static int fm3130_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct fm3130 *fm3130 = dev_get_drvdata(dev); + struct rtc_time *tm = &alrm->time; + int i; + + dev_dbg(dev, "%s secs=%d, mins=%d, " + "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", + "write alarm", tm->tm_sec, tm->tm_min, + tm->tm_hour, tm->tm_mday, + tm->tm_mon, tm->tm_year, tm->tm_wday); + + if (tm->tm_sec != -1) + fm3130->regs[FM3130_ALARM_SECONDS] = + BIN2BCD(tm->tm_sec) | 0x80; + + if (tm->tm_min != -1) + fm3130->regs[FM3130_ALARM_MINUTES] = + BIN2BCD(tm->tm_min) | 0x80; + + if (tm->tm_hour != -1) + fm3130->regs[FM3130_ALARM_HOURS] = + BIN2BCD(tm->tm_hour) | 0x80; + + if (tm->tm_mday != -1) + fm3130->regs[FM3130_ALARM_DATE] = + BIN2BCD(tm->tm_mday) | 0x80; + + if (tm->tm_mon != -1) + fm3130->regs[FM3130_ALARM_MONTHS] = + BIN2BCD(tm->tm_mon + 1) | 0x80; + + dev_dbg(dev, "alarm write %02x %02x %02x %02x %02x\n", + fm3130->regs[FM3130_ALARM_SECONDS], + fm3130->regs[FM3130_ALARM_MINUTES], + fm3130->regs[FM3130_ALARM_HOURS], + fm3130->regs[FM3130_ALARM_DATE], + fm3130->regs[FM3130_ALARM_MONTHS]); + /* Writing time registers, we don't support multibyte transfers */ + for (i = 0; i < FM3130_ALARM_REGS; i++) { + i2c_smbus_write_byte_data(fm3130->client, + FM3130_ALARM_SECONDS + i, + fm3130->regs[FM3130_ALARM_SECONDS + i]); + } + fm3130->regs[FM3130_RTC_CONTROL] = + i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL); + /* Checking for alarm */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) { + fm3130->alarm = 1; + fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF; + } + if (alrm->enabled) { + i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL, + (fm3130->regs[FM3130_RTC_CONTROL] & + ~(FM3130_RTC_CONTROL_BIT_CAL)) | + FM3130_RTC_CONTROL_BIT_AEN); + } else { + i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL, + fm3130->regs[FM3130_RTC_CONTROL] & + ~(FM3130_RTC_CONTROL_BIT_AEN)); + } + return 0; +} + +static const struct rtc_class_ops fm3130_rtc_ops = { + .read_time = fm3130_get_time, + .set_time = fm3130_set_time, + .read_alarm = fm3130_read_alarm, + .set_alarm = fm3130_set_alarm, +}; + +static struct i2c_driver fm3130_driver; + +static int __devinit fm3130_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct fm3130 *fm3130; + int err = -ENODEV; + int tmp; + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + + if (!i2c_check_functionality(adapter, + I2C_FUNC_I2C | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) + return -EIO; + + fm3130 = kzalloc(sizeof(struct fm3130), GFP_KERNEL); + + if (!fm3130) + return -ENOMEM; + + fm3130->client = client; + i2c_set_clientdata(client, fm3130); + fm3130->reg_addr_time = FM3130_RTC_SECONDS; + fm3130->reg_addr_alarm = FM3130_ALARM_SECONDS; + + /* Messages to read time */ + fm3130->msg[0].addr = client->addr; + fm3130->msg[0].flags = 0; + fm3130->msg[0].len = 1; + fm3130->msg[0].buf = &fm3130->reg_addr_time; + + fm3130->msg[1].addr = client->addr; + fm3130->msg[1].flags = I2C_M_RD; + fm3130->msg[1].len = FM3130_CLOCK_REGS; + fm3130->msg[1].buf = &fm3130->regs[FM3130_RTC_SECONDS]; + + /* Messages to read alarm */ + fm3130->msg[2].addr = client->addr; + fm3130->msg[2].flags = 0; + fm3130->msg[2].len = 1; + fm3130->msg[2].buf = &fm3130->reg_addr_alarm; + + fm3130->msg[3].addr = client->addr; + fm3130->msg[3].flags = I2C_M_RD; + fm3130->msg[3].len = FM3130_ALARM_REGS; + fm3130->msg[3].buf = &fm3130->regs[FM3130_ALARM_SECONDS]; + + fm3130->data_valid = 0; + + tmp = i2c_transfer(adapter, fm3130->msg, 4); + if (tmp != 4) { + pr_debug("read error %d\n", tmp); + err = -EIO; + goto exit_free; + } + + fm3130->regs[FM3130_RTC_CONTROL] = + i2c_smbus_read_byte_data(client, FM3130_RTC_CONTROL); + fm3130->regs[FM3130_CAL_CONTROL] = + i2c_smbus_read_byte_data(client, FM3130_CAL_CONTROL); + + /* Checking for alarm */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) { + fm3130->alarm = 1; + fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF; + } + + /* Disabling calibration mode */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_CAL) + i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL, + fm3130->regs[FM3130_RTC_CONTROL] & + ~(FM3130_RTC_CONTROL_BIT_CAL)); + dev_warn(&client->dev, "Disabling calibration mode!\n"); + + /* Disabling read and write modes */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_WRITE || + fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_READ) + i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL, + fm3130->regs[FM3130_RTC_CONTROL] & + ~(FM3130_RTC_CONTROL_BIT_READ | + FM3130_RTC_CONTROL_BIT_WRITE)); + dev_warn(&client->dev, "Disabling READ or WRITE mode!\n"); + + /* oscillator off? turn it on, so clock can tick. */ + if (fm3130->regs[FM3130_CAL_CONTROL] & FM3130_CAL_CONTROL_BIT_nOSCEN) + i2c_smbus_write_byte_data(client, FM3130_CAL_CONTROL, + fm3130->regs[FM3130_CAL_CONTROL] & + ~(FM3130_CAL_CONTROL_BIT_nOSCEN)); + + /* oscillator fault? clear flag, and warn */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_LB) + dev_warn(&client->dev, "Low battery!\n"); + + /* oscillator fault? clear flag, and warn */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_POR) { + i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL, + fm3130->regs[FM3130_RTC_CONTROL] & + ~FM3130_RTC_CONTROL_BIT_POR); + dev_warn(&client->dev, "SET TIME!\n"); + } + /* ACS is controlled by alarm */ + i2c_smbus_write_byte_data(client, FM3130_ALARM_WP_CONTROL, 0x80); + + /* TODO */ + /* TODO need to sanity check alarm */ + tmp = fm3130->regs[FM3130_RTC_SECONDS]; + tmp = BCD2BIN(tmp & 0x7f); + if (tmp > 60) + goto exit_bad; + tmp = BCD2BIN(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f); + if (tmp > 60) + goto exit_bad; + + tmp = BCD2BIN(fm3130->regs[FM3130_RTC_DATE] & 0x3f); + if (tmp == 0 || tmp > 31) + goto exit_bad; + + tmp = BCD2BIN(fm3130->regs[FM3130_RTC_MONTHS] & 0x1f); + if (tmp == 0 || tmp > 12) + goto exit_bad; + + tmp = fm3130->regs[FM3130_RTC_HOURS]; + + fm3130->data_valid = 1; + +exit_bad: + if (!fm3130->data_valid) + dev_dbg(&client->dev, + "%s: %02x %02x %02x %02x %02x %02x %02x %02x" + "%02x %02x %02x %02x %02x %02x %02x\n", + "bogus registers", + fm3130->regs[0], fm3130->regs[1], + fm3130->regs[2], fm3130->regs[3], + fm3130->regs[4], fm3130->regs[5], + fm3130->regs[6], fm3130->regs[7], + fm3130->regs[8], fm3130->regs[9], + fm3130->regs[0xa], fm3130->regs[0xb], + fm3130->regs[0xc], fm3130->regs[0xd], + fm3130->regs[0xe]); + + /* We won't bail out here because we just got invalid data. + Time setting from u-boot doesn't work anyway */ + fm3130->rtc = rtc_device_register(client->name, &client->dev, + &fm3130_rtc_ops, THIS_MODULE); + if (IS_ERR(fm3130->rtc)) { + err = PTR_ERR(fm3130->rtc); + dev_err(&client->dev, + "unable to register the class device\n"); + goto exit_free; + } + return 0; +exit_free: + kfree(fm3130); + return err; +} + +static int __devexit fm3130_remove(struct i2c_client *client) +{ + struct fm3130 *fm3130 = i2c_get_clientdata(client); + + rtc_device_unregister(fm3130->rtc); + kfree(fm3130); + return 0; +} + +static struct i2c_driver fm3130_driver = { + .driver = { + .name = "rtc-fm3130", + .owner = THIS_MODULE, + }, + .probe = fm3130_probe, + .remove = __devexit_p(fm3130_remove), + .id_table = fm3130_id, +}; + +static int __init fm3130_init(void) +{ + return i2c_add_driver(&fm3130_driver); +} +module_init(fm3130_init); + +static void __exit fm3130_exit(void) +{ + i2c_del_driver(&fm3130_driver); +} +module_exit(fm3130_exit); + +MODULE_DESCRIPTION("RTC driver for FM3130"); +MODULE_AUTHOR("Sergey Lapin "); +MODULE_LICENSE("GPL"); + -- cgit v1.2.3 From e297d99e103f951a71fcb1534f1ff3480dd3a851 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 10 Jun 2008 00:13:04 +0900 Subject: ahci: workarounds for mcp65 MCP65 ahci can do NCQ but doesn't set the CAP bit and rev A0 and A1 can't do MSI but have MSI capability. Implement AHCI_HFLAG_YES_NCQ and apply appropriate workarounds. Signed-off-by: Tejun Heo Cc: Peer Chen Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 40 +++++++++++++++++++++++++++++++--------- 1 file changed, 31 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 544b7d6c617..1c62b8e3964 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -89,6 +89,7 @@ enum { board_ahci_sb600 = 3, board_ahci_mv = 4, board_ahci_sb700 = 5, + board_ahci_mcp65 = 6, /* global controller registers */ HOST_CAP = 0x00, /* host capabilities */ @@ -190,6 +191,7 @@ enum { AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */ AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */ AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */ + AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */ /* ap->flags bits */ @@ -384,6 +386,14 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, + /* board_ahci_mcp65 */ + { + AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ), + .flags = AHCI_FLAG_COMMON, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_ops, + }, }; static const struct pci_device_id ahci_pci_tbl[] = { @@ -438,14 +448,14 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(VIA, 0x6287), board_ahci_vt8251 }, /* VIA VT8251 */ /* NVIDIA */ - { PCI_VDEVICE(NVIDIA, 0x044c), board_ahci }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x044d), board_ahci }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x044e), board_ahci }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x044f), board_ahci }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x045c), board_ahci }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x044c), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x044d), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x044e), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x044f), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x045c), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci_mcp65 }, /* MCP65 */ { PCI_VDEVICE(NVIDIA, 0x0550), board_ahci }, /* MCP67 */ { PCI_VDEVICE(NVIDIA, 0x0551), board_ahci }, /* MCP67 */ { PCI_VDEVICE(NVIDIA, 0x0552), board_ahci }, /* MCP67 */ @@ -624,6 +634,12 @@ static void ahci_save_initial_config(struct pci_dev *pdev, cap &= ~HOST_CAP_NCQ; } + if (!(cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_YES_NCQ)) { + dev_printk(KERN_INFO, &pdev->dev, + "controller can do NCQ, turning on CAP_NCQ\n"); + cap |= HOST_CAP_NCQ; + } + if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) { dev_printk(KERN_INFO, &pdev->dev, "controller can't do PMP, turning off CAP_PMP\n"); @@ -2118,7 +2134,8 @@ static void ahci_p5wdh_workaround(struct ata_host *host) static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; - struct ata_port_info pi = ahci_port_info[ent->driver_data]; + unsigned int board_id = ent->driver_data; + struct ata_port_info pi = ahci_port_info[board_id]; const struct ata_port_info *ppi[] = { &pi, NULL }; struct device *dev = &pdev->dev; struct ahci_host_priv *hpriv; @@ -2167,6 +2184,11 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) return -ENOMEM; hpriv->flags |= (unsigned long)pi.private_data; + /* MCP65 revision A1 and A2 can't do MSI */ + if (board_id == board_ahci_mcp65 && + (pdev->revision == 0xa1 || pdev->revision == 0xa2)) + hpriv->flags |= AHCI_HFLAG_NO_MSI; + if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev)) pci_intx(pdev, 1); -- cgit v1.2.3 From bd17243a84632465f5403bc9eb8b4831bd67e582 Mon Sep 17 00:00:00 2001 From: Shane Huang Date: Tue, 10 Jun 2008 15:52:04 +0800 Subject: ahci: Workaround HW bug for SB600/700 SATA controller PMP support There is one bug in ATI SATA PMP of SB600 and SB700 old revision, which leads to soft reset failure. This patch can fix the bug. Signed-off-by: Shane Huang Acked-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 99 ++++++++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 82 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 1c62b8e3964..966ab401e52 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -255,6 +255,8 @@ static void ahci_pmp_attach(struct ata_port *ap); static void ahci_pmp_detach(struct ata_port *ap); static int ahci_softreset(struct ata_link *link, unsigned int *class, unsigned long deadline); +static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); static int ahci_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline); static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class, @@ -331,6 +333,12 @@ static struct ata_port_operations ahci_p5wdh_ops = { .hardreset = ahci_p5wdh_hardreset, }; +static struct ata_port_operations ahci_sb600_ops = { + .inherits = &ahci_ops, + .softreset = ahci_sb600_softreset, + .pmp_softreset = ahci_sb600_softreset, +}; + #define AHCI_HFLAGS(flags) .private_data = (void *)(flags) static const struct ata_port_info ahci_port_info[] = { @@ -361,11 +369,11 @@ static const struct ata_port_info ahci_port_info[] = { { AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL | AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI | - AHCI_HFLAG_SECT255 | AHCI_HFLAG_NO_PMP), + AHCI_HFLAG_SECT255), .flags = AHCI_FLAG_COMMON, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, - .port_ops = &ahci_ops, + .port_ops = &ahci_sb600_ops, }, /* board_ahci_mv */ { @@ -379,12 +387,11 @@ static const struct ata_port_info ahci_port_info[] = { }, /* board_ahci_sb700 */ { - AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL | - AHCI_HFLAG_NO_PMP), + AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL), .flags = AHCI_FLAG_COMMON, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, - .port_ops = &ahci_ops, + .port_ops = &ahci_sb600_ops, }, /* board_ahci_mcp65 */ { @@ -1278,19 +1285,11 @@ static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp, return 0; } -static int ahci_check_ready(struct ata_link *link) -{ - void __iomem *port_mmio = ahci_port_base(link->ap); - u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF; - - return ata_check_ready(status); -} - -static int ahci_softreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) +static int ahci_do_softreset(struct ata_link *link, unsigned int *class, + int pmp, unsigned long deadline, + int (*check_ready)(struct ata_link *link)) { struct ata_port *ap = link->ap; - int pmp = sata_srst_pmp(link); const char *reason = NULL; unsigned long now, msecs; struct ata_taskfile tf; @@ -1328,7 +1327,7 @@ static int ahci_softreset(struct ata_link *link, unsigned int *class, ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0); /* wait for link to become ready */ - rc = ata_wait_after_reset(link, deadline, ahci_check_ready); + rc = ata_wait_after_reset(link, deadline, check_ready); /* link occupied, -ENODEV too is an error */ if (rc) { reason = "device not ready"; @@ -1344,6 +1343,72 @@ static int ahci_softreset(struct ata_link *link, unsigned int *class, return rc; } +static int ahci_check_ready(struct ata_link *link) +{ + void __iomem *port_mmio = ahci_port_base(link->ap); + u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF; + + return ata_check_ready(status); +} + +static int ahci_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + int pmp = sata_srst_pmp(link); + + DPRINTK("ENTER\n"); + + return ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready); +} + +static int ahci_sb600_check_ready(struct ata_link *link) +{ + void __iomem *port_mmio = ahci_port_base(link->ap); + u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF; + u32 irq_status = readl(port_mmio + PORT_IRQ_STAT); + + /* + * There is no need to check TFDATA if BAD PMP is found due to HW bug, + * which can save timeout delay. + */ + if (irq_status & PORT_IRQ_BAD_PMP) + return -EIO; + + return ata_check_ready(status); +} + +static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + void __iomem *port_mmio = ahci_port_base(ap); + int pmp = sata_srst_pmp(link); + int rc; + u32 irq_sts; + + DPRINTK("ENTER\n"); + + rc = ahci_do_softreset(link, class, pmp, deadline, + ahci_sb600_check_ready); + + /* + * Soft reset fails on some ATI chips with IPMS set when PMP + * is enabled but SATA HDD/ODD is connected to SATA port, + * do soft reset again to port 0. + */ + if (rc == -EIO) { + irq_sts = readl(port_mmio + PORT_IRQ_STAT); + if (irq_sts & PORT_IRQ_BAD_PMP) { + ata_link_printk(link, KERN_WARNING, + "failed due to HW bug, retry pmp=0\n"); + rc = ahci_do_softreset(link, class, 0, deadline, + ahci_check_ready); + } + } + + return rc; +} + static int ahci_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline) { -- cgit v1.2.3 From 62128b2ca812c1266f4ff7bac068bf0b626c6179 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:21 +0200 Subject: opti621: disable read prefetch This fixes 2.6.25 regression (kernel.org bugzilla bug #10723) caused by: commit 912fb29a36a7269ac1c4a4df45bc0ac1d2637972 Author: Bartlomiej Zolnierkiewicz Date: Fri Oct 19 00:30:11 2007 +0200 opti621: always tune PIO ... Based on a bugreport from Juergen Kosel & inspired by pata_opti.c code. Bisected-by: Juergen Kosel Tested-by: Juergen Kosel Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/opti621.c | 15 ++------------- 1 file changed, 2 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c index 6e99080497b..e31e0f970a2 100644 --- a/drivers/ide/pci/opti621.c +++ b/drivers/ide/pci/opti621.c @@ -102,18 +102,6 @@ * address: 50 ns, data: 50 ns, recovery: 100 ns. */ -/* #define READ_PREFETCH 0 */ -/* Uncomment for disable read prefetch. - * There is some readprefetch capatibility in hdparm, - * but when I type hdparm -P 1 /dev/hda, I got errors - * and till reset drive is inaccessible. - * This (hw) read prefetch is safe on my drive. - */ - -#ifndef READ_PREFETCH -#define READ_PREFETCH 0x40 /* read prefetch is enabled */ -#endif /* else read prefetch is disabled */ - #define READ_REG 0 /* index of Read cycle timing register */ #define WRITE_REG 1 /* index of Write cycle timing register */ #define CNTRL_REG 3 /* index of Control register */ @@ -264,7 +252,8 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) cycle1 = ((first.data_time-1)<<4) | (first.recovery_time-2); cycle2 = ((second.data_time-1)<<4) | (second.recovery_time-2); - misc = READ_PREFETCH | ((ax-1)<<4) | ((drdy-2)<<1); + + misc = ((ax - 1) << 4) | ((drdy - 2) << 1); #ifdef OPTI621_DEBUG printk("%s: master: address: %d, data: %d, " -- cgit v1.2.3 From f361037631ba547ea88adf8d2359d810c1b2605a Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:21 +0200 Subject: opti621: remove DMA support These controllers don't support DMA. Based on a bugreport from Juergen Kosel & inspired by pata_opti.c code. Tested-by: Juergen Kosel Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/opti621.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c index e31e0f970a2..65f18073894 100644 --- a/drivers/ide/pci/opti621.c +++ b/drivers/ide/pci/opti621.c @@ -324,18 +324,14 @@ static const struct ide_port_info opti621_chipsets[] __devinitdata = { .name = "OPTI621", .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} }, .port_ops = &opti621_port_ops, - .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA, + .host_flags = IDE_HFLAG_NO_DMA, .pio_mask = ATA_PIO3, - .swdma_mask = ATA_SWDMA2, - .mwdma_mask = ATA_MWDMA2, }, { /* 1 */ .name = "OPTI621X", .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} }, .port_ops = &opti621_port_ops, - .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA, + .host_flags = IDE_HFLAG_NO_DMA, .pio_mask = ATA_PIO3, - .swdma_mask = ATA_SWDMA2, - .mwdma_mask = ATA_MWDMA2, } }; -- cgit v1.2.3 From 21bd33a656a60daadc475ce330272f4410ae27b7 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:22 +0200 Subject: opti621: use PCI clock value provided by controller Use PCI clock value provided by controller instead of depending on a default (or user supplied) value. Based on a bugreport from Juergen Kosel & inspired by pata_opti.c code. Tested-by: Juergen Kosel Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/opti621.c | 42 ++++++++++++++++++++++-------------------- 1 file changed, 22 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c index 65f18073894..7547fa2d83a 100644 --- a/drivers/ide/pci/opti621.c +++ b/drivers/ide/pci/opti621.c @@ -193,11 +193,10 @@ typedef struct pio_clocks_s { int recovery_time; /* Recovery time (clocks) */ } pio_clocks_t; -static void compute_clocks(int pio, pio_clocks_t *clks) +static void compute_clocks(int pio, pio_clocks_t *clks, int bus_speed) { if (pio != PIO_NOT_EXIST) { int adr_setup, data_pls; - int bus_speed = ide_pci_clk ? ide_pci_clk : system_bus_clock(); adr_setup = ide_pio_timings[pio].setup_time; data_pls = ide_pio_timings[pio].active_time; @@ -234,7 +233,7 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) u8 pio1 = 0, pio2 = 0; pio_clocks_t first, second; int ax, drdy; - u8 cycle1, cycle2, misc; + u8 cycle1, cycle2, misc, clk; ide_hwif_t *hwif = HWIF(drive); /* sets drive->drive_data for both drives */ @@ -242,8 +241,26 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) pio1 = hwif->drives[0].drive_data; pio2 = hwif->drives[1].drive_data; - compute_clocks(pio1, &first); - compute_clocks(pio2, &second); + spin_lock_irqsave(&opti621_lock, flags); + + reg_base = hwif->io_ports.data_addr; + + /* allow Register-B */ + outb(0xc0, reg_base + CNTRL_REG); + /* hmm, setupvic.exe does this ;-) */ + outb(0xff, reg_base + 5); + /* if reads 0xff, adapter not exist? */ + (void)inb(reg_base + CNTRL_REG); + /* if reads 0xc0, no interface exist? */ + read_reg(CNTRL_REG); + + /* check CLK speed */ + clk = read_reg(STRAP_REG) & 1; + + printk(KERN_INFO "%s: CLK = %d MHz\n", hwif->name, clk ? 25 : 33); + + compute_clocks(pio1, &first, clk ? 25 : 33); + compute_clocks(pio2, &second, clk ? 25 : 33); /* ax = max(a1,a2) */ ax = (first.address_time < second.address_time) ? second.address_time : first.address_time; @@ -266,21 +283,6 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) second.recovery_time, drdy); #endif - spin_lock_irqsave(&opti621_lock, flags); - - reg_base = hwif->io_ports.data_addr; - - /* allow Register-B */ - outb(0xc0, reg_base + CNTRL_REG); - /* hmm, setupvic.exe does this ;-) */ - outb(0xff, reg_base + 5); - /* if reads 0xff, adapter not exist? */ - (void)inb(reg_base + CNTRL_REG); - /* if reads 0xc0, no interface exist? */ - read_reg(CNTRL_REG); - /* read version, probably 0 */ - read_reg(STRAP_REG); - /* program primary drive */ /* select Index-0 for Register-A */ write_reg(0, MISC_REG); -- cgit v1.2.3 From 6c987183fcc3c6cb9eb77fd0b3e8ca1ac98a4813 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:22 +0200 Subject: opti621: program devices timings separately in ->set_pio_mode * Set drive->drive_data to 'pio + XFER_PIO_0' instead of 'pio', then simplify selecting maximum adress setup timing. * Remove no longer needed compute_pios() and opti621_port_init_devs(). * Program devices timings separately in ->set_pio_mode. Based on a bugreport from Juergen Kosel & inspired by pata_opti.c code. Tested-by: Juergen Kosel Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/opti621.c | 80 +++++++++-------------------------------------- 1 file changed, 15 insertions(+), 65 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c index 7547fa2d83a..c746e6f0607 100644 --- a/drivers/ide/pci/opti621.c +++ b/drivers/ide/pci/opti621.c @@ -115,34 +115,6 @@ static int reg_base; static DEFINE_SPINLOCK(opti621_lock); -/* there are stored pio numbers from other calls of opti621_set_pio_mode */ -static void compute_pios(ide_drive_t *drive, const u8 pio) -/* Store values into drive->drive_data - * second_contr - 0 for primary controller, 1 for secondary - * slave_drive - 0 -> pio is for master, 1 -> pio is for slave - * pio - PIO mode for selected drive (for other we don't know) - */ -{ - int d; - ide_hwif_t *hwif = HWIF(drive); - - drive->drive_data = pio; - - for (d = 0; d < 2; ++d) { - drive = &hwif->drives[d]; - if (drive->present) { - if (drive->drive_data == PIO_DONT_KNOW) - drive->drive_data = ide_get_best_pio_mode(drive, 255, 3); -#ifdef OPTI621_DEBUG - printk("%s: Selected PIO mode %d\n", - drive->name, drive->drive_data); -#endif - } else { - drive->drive_data = PIO_NOT_EXIST; - } - } -} - static int cmpt_clk(int time, int bus_speed) /* Returns (rounded up) time in clocks for time in ns, * with bus_speed in MHz. @@ -226,20 +198,19 @@ static void compute_clocks(int pio, pio_clocks_t *clks, int bus_speed) static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) { - /* primary and secondary drives share some registers, - * so we have to program both drives - */ + ide_hwif_t *hwif = drive->hwif; + ide_drive_t *pair = ide_get_paired_drive(drive); unsigned long flags; - u8 pio1 = 0, pio2 = 0; pio_clocks_t first, second; int ax, drdy; - u8 cycle1, cycle2, misc, clk; - ide_hwif_t *hwif = HWIF(drive); + u8 cycle1, misc, clk, addr_pio = pio; - /* sets drive->drive_data for both drives */ - compute_pios(drive, pio); - pio1 = hwif->drives[0].drive_data; - pio2 = hwif->drives[1].drive_data; + drive->drive_data = XFER_PIO_0 + pio; + + if (pair->present) { + if (pair->drive_data && pair->drive_data < drive->drive_data) + addr_pio = pair->drive_data - XFER_PIO_0; + } spin_lock_irqsave(&opti621_lock, flags); @@ -259,8 +230,8 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) printk(KERN_INFO "%s: CLK = %d MHz\n", hwif->name, clk ? 25 : 33); - compute_clocks(pio1, &first, clk ? 25 : 33); - compute_clocks(pio2, &second, clk ? 25 : 33); + compute_clocks(pio, &first, clk ? 25 : 33); + compute_clocks(addr_pio, &second, clk ? 25 : 33); /* ax = max(a1,a2) */ ax = (first.address_time < second.address_time) ? second.address_time : first.address_time; @@ -268,37 +239,23 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) drdy = 2; /* DRDY is default 2 (by OPTi Databook) */ cycle1 = ((first.data_time-1)<<4) | (first.recovery_time-2); - cycle2 = ((second.data_time-1)<<4) | (second.recovery_time-2); misc = ((ax - 1) << 4) | ((drdy - 2) << 1); #ifdef OPTI621_DEBUG - printk("%s: master: address: %d, data: %d, " + printk("%s: address: %d, data: %d, " "recovery: %d, drdy: %d [clk]\n", - hwif->name, ax, first.data_time, + drive->name, ax, first.data_time, first.recovery_time, drdy); - printk("%s: slave: address: %d, data: %d, " - "recovery: %d, drdy: %d [clk]\n", - hwif->name, ax, second.data_time, - second.recovery_time, drdy); #endif - /* program primary drive */ - /* select Index-0 for Register-A */ - write_reg(0, MISC_REG); + /* select Index-0/1 for Register-A/B */ + write_reg(drive->select.b.unit, MISC_REG); /* set read cycle timings */ write_reg(cycle1, READ_REG); /* set write cycle timings */ write_reg(cycle1, WRITE_REG); - /* program secondary drive */ - /* select Index-1 for Register-B */ - write_reg(1, MISC_REG); - /* set read cycle timings */ - write_reg(cycle2, READ_REG); - /* set write cycle timings */ - write_reg(cycle2, WRITE_REG); - /* use Register-A for drive 0 */ /* use Register-B for drive 1 */ write_reg(0x85, CNTRL_REG); @@ -310,14 +267,7 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) spin_unlock_irqrestore(&opti621_lock, flags); } -static void __devinit opti621_port_init_devs(ide_hwif_t *hwif) -{ - hwif->drives[0].drive_data = PIO_DONT_KNOW; - hwif->drives[1].drive_data = PIO_DONT_KNOW; -} - static const struct ide_port_ops opti621_port_ops = { - .port_init_devs = opti621_port_init_devs, .set_pio_mode = opti621_set_pio_mode, }; -- cgit v1.2.3 From 810253d44bc92b44b66cd9944b579de54c0cd3ff Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:22 +0200 Subject: opti621: use pre-calculated PIO timings * Use pre-calculated PIO timings in ->set_pio_mode. * Remove no longer needed compute_clocks(), cmpt_clk(), struct pio_clocks_s, PIO_* defines and OPTI621_DEBUG define. There should be no functional changes caused by this patch. Based on a bugreport from Juergen Kosel & inspired by pata_opti.c code. Tested-by: Juergen Kosel Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/opti621.c | 92 ++++++++--------------------------------------- 1 file changed, 15 insertions(+), 77 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c index c746e6f0607..8c715b7a85d 100644 --- a/drivers/ide/pci/opti621.c +++ b/drivers/ide/pci/opti621.c @@ -81,8 +81,6 @@ * 0.5 doesn't work. */ -#define OPTI621_DEBUG /* define for debug messages */ - #include #include #include @@ -110,23 +108,8 @@ static int reg_base; -#define PIO_NOT_EXIST 254 -#define PIO_DONT_KNOW 255 - static DEFINE_SPINLOCK(opti621_lock); -static int cmpt_clk(int time, int bus_speed) -/* Returns (rounded up) time in clocks for time in ns, - * with bus_speed in MHz. - * Example: bus_speed = 40 MHz, time = 80 ns - * 1000/40 = 25 ns (clk value), - * 80/25 = 3.2, rounded up to 4 (I hope ;-)). - * Use idebus=xx to select right frequency. - */ -{ - return ((time*bus_speed+999)/1000); -} - /* Write value to register reg, base of register * is at reg_base (0x1f0 primary, 0x170 secondary, * if not changed by PCI configuration). @@ -159,51 +142,22 @@ static u8 read_reg(int reg) return ret; } -typedef struct pio_clocks_s { - int address_time; /* Address setup (clocks) */ - int data_time; /* Active/data pulse (clocks) */ - int recovery_time; /* Recovery time (clocks) */ -} pio_clocks_t; - -static void compute_clocks(int pio, pio_clocks_t *clks, int bus_speed) -{ - if (pio != PIO_NOT_EXIST) { - int adr_setup, data_pls; - - adr_setup = ide_pio_timings[pio].setup_time; - data_pls = ide_pio_timings[pio].active_time; - clks->address_time = cmpt_clk(adr_setup, bus_speed); - clks->data_time = cmpt_clk(data_pls, bus_speed); - clks->recovery_time = cmpt_clk(ide_pio_timings[pio].cycle_time - - adr_setup-data_pls, bus_speed); - if (clks->address_time < 1) - clks->address_time = 1; - if (clks->address_time > 4) - clks->address_time = 4; - if (clks->data_time < 1) - clks->data_time = 1; - if (clks->data_time > 16) - clks->data_time = 16; - if (clks->recovery_time < 2) - clks->recovery_time = 2; - if (clks->recovery_time > 17) - clks->recovery_time = 17; - } else { - clks->address_time = 1; - clks->data_time = 1; - clks->recovery_time = 2; - /* minimal values */ - } -} - static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) { ide_hwif_t *hwif = drive->hwif; ide_drive_t *pair = ide_get_paired_drive(drive); unsigned long flags; - pio_clocks_t first, second; - int ax, drdy; - u8 cycle1, misc, clk, addr_pio = pio; + u8 tim, misc, addr_pio = pio, clk; + + /* DRDY is default 2 (by OPTi Databook) */ + static const u8 addr_timings[2][4] = { + { 0x20, 0x10, 0x00, 0x00 }, /* 33 MHz */ + { 0x10, 0x10, 0x00, 0x00 }, /* 25 MHz */ + }; + static const u8 data_rec_timings[2][4] = { + { 0x5b, 0x45, 0x32, 0x21 }, /* 33 MHz */ + { 0x48, 0x34, 0x21, 0x10 } /* 25 MHz */ + }; drive->drive_data = XFER_PIO_0 + pio; @@ -230,31 +184,15 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) printk(KERN_INFO "%s: CLK = %d MHz\n", hwif->name, clk ? 25 : 33); - compute_clocks(pio, &first, clk ? 25 : 33); - compute_clocks(addr_pio, &second, clk ? 25 : 33); - - /* ax = max(a1,a2) */ - ax = (first.address_time < second.address_time) ? second.address_time : first.address_time; - - drdy = 2; /* DRDY is default 2 (by OPTi Databook) */ - - cycle1 = ((first.data_time-1)<<4) | (first.recovery_time-2); - - misc = ((ax - 1) << 4) | ((drdy - 2) << 1); - -#ifdef OPTI621_DEBUG - printk("%s: address: %d, data: %d, " - "recovery: %d, drdy: %d [clk]\n", - drive->name, ax, first.data_time, - first.recovery_time, drdy); -#endif + tim = data_rec_timings[clk][pio]; + misc = addr_timings[clk][addr_pio]; /* select Index-0/1 for Register-A/B */ write_reg(drive->select.b.unit, MISC_REG); /* set read cycle timings */ - write_reg(cycle1, READ_REG); + write_reg(tim, READ_REG); /* set write cycle timings */ - write_reg(cycle1, WRITE_REG); + write_reg(tim, WRITE_REG); /* use Register-A for drive 0 */ /* use Register-B for drive 1 */ -- cgit v1.2.3 From 80a65fc5ee04497e6c28bdaefc44d375b19c4a79 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:22 +0200 Subject: opti621: add PIO 4 support * Add PIO 4 support. While at it: * Use a single struct ide_port_info instance for OPTi621 and OPTi621X. Based on a bugreport from Juergen Kosel & inspired by pata_opti.c code. Tested-by: Juergen Kosel Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/opti621.c | 46 ++++++++++++++-------------------------------- 1 file changed, 14 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c index 8c715b7a85d..725c80508d9 100644 --- a/drivers/ide/pci/opti621.c +++ b/drivers/ide/pci/opti621.c @@ -90,16 +90,6 @@ #include -//#define OPTI621_MAX_PIO 3 -/* In fact, I do not have any PIO 4 drive - * (address: 25 ns, data: 70 ns, recovery: 35 ns), - * but OPTi 82C621 is programmable and it can do (minimal values): - * on 40MHz PCI bus (pulse 25 ns): - * address: 25 ns, data: 25 ns, recovery: 50 ns; - * on 20MHz PCI bus (pulse 50 ns): - * address: 50 ns, data: 50 ns, recovery: 100 ns. - */ - #define READ_REG 0 /* index of Read cycle timing register */ #define WRITE_REG 1 /* index of Write cycle timing register */ #define CNTRL_REG 3 /* index of Control register */ @@ -150,13 +140,13 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) u8 tim, misc, addr_pio = pio, clk; /* DRDY is default 2 (by OPTi Databook) */ - static const u8 addr_timings[2][4] = { - { 0x20, 0x10, 0x00, 0x00 }, /* 33 MHz */ - { 0x10, 0x10, 0x00, 0x00 }, /* 25 MHz */ + static const u8 addr_timings[2][5] = { + { 0x20, 0x10, 0x00, 0x00, 0x00 }, /* 33 MHz */ + { 0x10, 0x10, 0x00, 0x00, 0x00 }, /* 25 MHz */ }; - static const u8 data_rec_timings[2][4] = { - { 0x5b, 0x45, 0x32, 0x21 }, /* 33 MHz */ - { 0x48, 0x34, 0x21, 0x10 } /* 25 MHz */ + static const u8 data_rec_timings[2][5] = { + { 0x5b, 0x45, 0x32, 0x21, 0x20 }, /* 33 MHz */ + { 0x48, 0x34, 0x21, 0x10, 0x10 } /* 25 MHz */ }; drive->drive_data = XFER_PIO_0 + pio; @@ -209,30 +199,22 @@ static const struct ide_port_ops opti621_port_ops = { .set_pio_mode = opti621_set_pio_mode, }; -static const struct ide_port_info opti621_chipsets[] __devinitdata = { - { /* 0 */ - .name = "OPTI621", - .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} }, - .port_ops = &opti621_port_ops, - .host_flags = IDE_HFLAG_NO_DMA, - .pio_mask = ATA_PIO3, - }, { /* 1 */ - .name = "OPTI621X", - .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} }, - .port_ops = &opti621_port_ops, - .host_flags = IDE_HFLAG_NO_DMA, - .pio_mask = ATA_PIO3, - } +static const struct ide_port_info opti621_chipset __devinitdata = { + .name = "OPTI621/X", + .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} }, + .port_ops = &opti621_port_ops, + .host_flags = IDE_HFLAG_NO_DMA, + .pio_mask = ATA_PIO4, }; static int __devinit opti621_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - return ide_setup_pci_device(dev, &opti621_chipsets[id->driver_data]); + return ide_setup_pci_device(dev, &opti621_chipset); } static const struct pci_device_id opti621_pci_tbl[] = { { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C621), 0 }, - { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C825), 1 }, + { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C825), 0 }, { 0, }, }; MODULE_DEVICE_TABLE(pci, opti621_pci_tbl); -- cgit v1.2.3 From c1a8e39819bd6797ee2b82b88517268d39921b03 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:23 +0200 Subject: ide-pmac: bugfix for media-bay support rework Fix bug introduced by: commit 2dde7861afa23cd59db83515cb0b810b92b220aa Author: Bartlomiej Zolnierkiewicz Date: Fri Apr 18 00:46:23 2008 +0200 ide: rework PowerMac media-bay support (take 2) ... [ Yeah, I suck. ] bay->cd_index shouldn't be changed if IDE devices are not present or retry operations won't happen. Cc: Benjamin Herrenschmidt Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/macintosh/mediabay.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c index 82add26cc66..c34bdf852e3 100644 --- a/drivers/macintosh/mediabay.c +++ b/drivers/macintosh/mediabay.c @@ -556,7 +556,8 @@ static void media_bay_step(int i) printk("mediabay %d, registering IDE...\n", i); pmu_suspend(); ide_port_scan(bay->cd_port); - bay->cd_index = bay->cd_port->index; + if (bay->cd_port->present) + bay->cd_index = bay->cd_port->index; pmu_resume(); } if (bay->cd_index == -1) { -- cgit v1.2.3 From 07a6c66da53f646a39103290bfbd85be18892895 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:23 +0200 Subject: ide-pmac: add ->cable_detect method Add ->cable_detect method and remove no longer needed pmif->cable_80 flag (there is also no need to mask ->udma_mask now). This fixes: - forced ignoring of cable detection (needed for some CF devices & debug) - cable detection for warm-plug Cc: Benjamin Herrenschmidt Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ppc/pmac.c | 55 ++++++++++++++++++++++++++++---------------------- 1 file changed, 31 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 48aa019127b..7f669a997aa 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -59,7 +59,6 @@ typedef struct pmac_ide_hwif { int irq; int kind; int aapl_bus_id; - unsigned cable_80 : 1; unsigned mediabay : 1; unsigned broken_dma : 1; unsigned broken_dma_warn : 1; @@ -918,10 +917,40 @@ pmac_ide_do_resume(ide_hwif_t *hwif) return 0; } +static u8 pmac_ide_cable_detect(ide_hwif_t *hwif) +{ + pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)ide_get_hwifdata(hwif); + struct device_node *np = pmif->node; + const char *cable = of_get_property(np, "cable-type", NULL); + + /* Get cable type from device-tree. */ + if (cable && !strncmp(cable, "80-", 3)) + return ATA_CBL_PATA80; + + /* + * G5's seem to have incorrect cable type in device-tree. + * Let's assume they have a 80 conductor cable, this seem + * to be always the case unless the user mucked around. + */ + if (of_device_is_compatible(np, "K2-UATA") || + of_device_is_compatible(np, "shasta-ata")) + return ATA_CBL_PATA80; + + return ATA_CBL_PATA40; +} + static const struct ide_port_ops pmac_ide_ata6_port_ops = { .set_pio_mode = pmac_ide_set_pio_mode, .set_dma_mode = pmac_ide_set_dma_mode, .selectproc = pmac_ide_kauai_selectproc, + .cable_detect = pmac_ide_cable_detect, +}; + +static const struct ide_port_ops pmac_ide_ata4_port_ops = { + .set_pio_mode = pmac_ide_set_pio_mode, + .set_dma_mode = pmac_ide_set_dma_mode, + .selectproc = pmac_ide_selectproc, + .cable_detect = pmac_ide_cable_detect, }; static const struct ide_port_ops pmac_ide_port_ops = { @@ -962,7 +991,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; struct ide_port_info d = pmac_port_info; - pmif->cable_80 = 0; pmif->broken_dma = pmif->broken_dma_warn = 0; if (of_device_is_compatible(np, "shasta-ata")) { pmif->kind = controller_sh_ata6; @@ -979,6 +1007,7 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) } else if (of_device_is_compatible(np, "keylargo-ata")) { if (strcmp(np->name, "ata-4") == 0) { pmif->kind = controller_kl_ata4; + d.port_ops = &pmac_ide_ata4_port_ops; d.udma_mask = ATA_UDMA4; } else pmif->kind = controller_kl_ata3; @@ -992,22 +1021,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) bidp = of_get_property(np, "AAPL,bus-id", NULL); pmif->aapl_bus_id = bidp ? *bidp : 0; - /* Get cable type from device-tree */ - if (pmif->kind == controller_kl_ata4 || pmif->kind == controller_un_ata6 - || pmif->kind == controller_k2_ata6 - || pmif->kind == controller_sh_ata6) { - const char* cable = of_get_property(np, "cable-type", NULL); - if (cable && !strncmp(cable, "80-", 3)) - pmif->cable_80 = 1; - } - /* G5's seem to have incorrect cable type in device-tree. Let's assume - * they have a 80 conductor cable, this seem to be always the case unless - * the user mucked around - */ - if (of_device_is_compatible(np, "K2-UATA") || - of_device_is_compatible(np, "shasta-ata")) - pmif->cable_80 = 1; - /* On Kauai-type controllers, we make sure the FCR is correct */ if (pmif->kauai_fcr) writel(KAUAI_FCR_UATA_MAGIC | @@ -1053,7 +1066,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) hwif->hwif_data = pmif; ide_init_port_hw(hwif, hw); - hwif->cbl = pmif->cable_80 ? ATA_CBL_PATA80 : ATA_CBL_PATA40; printk(KERN_INFO "ide%d: Found Apple %s controller, bus ID %d%s, irq %d\n", hwif->index, model_name[pmif->kind], pmif->aapl_bus_id, @@ -1070,11 +1082,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) } } -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC - if (pmif->cable_80 == 0) - d.udma_mask &= ATA_UDMA2; -#endif - idx[0] = hwif->index; ide_device_add(idx, &d); -- cgit v1.2.3 From 5b16464ac32a92c2332030d11ec445bddeb141fa Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:23 +0200 Subject: ide-pmac: remove bogus comment about pmac_ide_setup_device() Cc: Benjamin Herrenschmidt Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ppc/pmac.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 7f669a997aa..ba2d5872796 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -978,10 +978,7 @@ static const struct ide_port_info pmac_port_info = { /* * Setup, register & probe an IDE channel driven by this driver, this is - * called by one of the 2 probe functions (macio or PCI). Note that a channel - * that ends up beeing free of any device is not kept around by this driver - * (it is kept in 2.4). This introduce an interface numbering change on some - * rare machines unfortunately, but it's better this way. + * called by one of the 2 probe functions (macio or PCI). */ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) -- cgit v1.2.3 From 792a1a98560a2a1619491eed8b18fccb09b312a7 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:23 +0200 Subject: ide-cs: fix probing and add warm-plug support * Fix probing by using ide_port_scan() and moving "retry loop" from ide_config() to idecs_register(). * Don't fail probe if there are no devices attached to a port. * Remove (now redundant) error message from ide_config(). Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/legacy/ide-cs.c | 33 ++++++++++++++------------------- 1 file changed, 14 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index aa2ea3deac8..d08107db54d 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -194,6 +194,16 @@ static ide_hwif_t *idecs_register(unsigned long io, unsigned long ctl, if (hwif->present) return hwif; + /* retry registration in case device is still spinning up */ + for (i = 0; i < 10; i++) { + msleep(100); + ide_port_scan(hwif); + if (hwif->present) + return hwif; + } + + return hwif; + out_release: release_region(ctl, 1); release_region(io, 8); @@ -222,7 +232,7 @@ static int ide_config(struct pcmcia_device *link) cistpl_cftable_entry_t dflt; } *stk = NULL; cistpl_cftable_entry_t *cfg; - int i, pass, last_ret = 0, last_fn = 0, is_kme = 0; + int pass, last_ret = 0, last_fn = 0, is_kme = 0; unsigned long io_base, ctl_base; ide_hwif_t *hwif; @@ -319,30 +329,15 @@ static int ide_config(struct pcmcia_device *link) if (is_kme) outb(0x81, ctl_base+1); - /* retry registration in case device is still spinning up */ - for (i = 0; i < 10; i++) { - hwif = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link); - if (hwif) - break; - if (link->io.NumPorts1 == 0x20) { + hwif = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link); + if (hwif == NULL && link->io.NumPorts1 == 0x20) { outb(0x02, ctl_base + 0x10); hwif = idecs_register(io_base + 0x10, ctl_base + 0x10, link->irq.AssignedIRQ, link); - if (hwif) { - io_base += 0x10; - ctl_base += 0x10; - break; - } - } - msleep(100); } - if (hwif == NULL) { - printk(KERN_NOTICE "ide-cs: ide_register() at 0x%3lx & 0x%3lx" - ", irq %u failed\n", io_base, ctl_base, - link->irq.AssignedIRQ); + if (hwif == NULL) goto failed; - } info->ndev = 1; sprintf(info->node.dev_name, "hd%c", 'a' + hwif->index * 2); -- cgit v1.2.3 From fbc69fd9b76158daaa83e5372e44fdd81df20f92 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:23 +0200 Subject: ide-cs: fix releasing I/O resources hwif content is already freed after ide_release() call so cache hwif->io_ports.{data,ctl}_addr in local variables in ide_detach(). This fixes post-2.6.25 regression. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/legacy/ide-cs.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index d08107db54d..f633b6b3c7f 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -135,13 +135,17 @@ static void ide_detach(struct pcmcia_device *link) { ide_info_t *info = link->priv; ide_hwif_t *hwif = info->hwif; + unsigned long data_addr, ctl_addr; DEBUG(0, "ide_detach(0x%p)\n", link); + data_addr = hwif->io_ports.data_addr; + ctl_addr = hwif->io_ports.ctl_addr; + ide_release(link); - release_region(hwif->io_ports.ctl_addr, 1); - release_region(hwif->io_ports.data_addr, 8); + release_region(ctl_addr, 1); + release_region(data_addr, 8); kfree(info); } /* ide_detach */ -- cgit v1.2.3 From 0cbccbc30a60ff60dbeb203154f1f527c632de9b Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:24 +0200 Subject: ide-generic: don't probe all legacy ISA IDE ports by default We can't probe all legacy ISA IDE ports by default as the resources may be occupied by other ISA devices. Add "probe_mask" module parameter and probe only first two ISA IDE ports by default leaving the decision about probing the rest to the user (systems with ISA ide2-6 should be very, very rare). This fixes a regression caused by: commit 343a3451e20314d5959b59b992e33fbaadfe52bf Author: Bartlomiej Zolnierkiewicz Date: Tue Jun 10 20:56:36 2008 +0200 ide-generic: add missing hwif->chipset setup ... Reported-by: Mikael Pettersson Bisected-by: Mikael Pettersson Tested-by: Mikael Pettersson Cc: Alan Cox Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-generic.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c index 9134488ac04..2d92214096a 100644 --- a/drivers/ide/ide-generic.c +++ b/drivers/ide/ide-generic.c @@ -22,6 +22,10 @@ #define DRV_NAME "ide_generic" +static int probe_mask = 0x03; +module_param(probe_mask, int, 0); +MODULE_PARM_DESC(probe_mask, "probe mask for legacy ISA IDE ports"); + static ssize_t store_add(struct class *cls, const char *buf, size_t n) { ide_hwif_t *hwif; @@ -89,6 +93,9 @@ static int __init ide_generic_init(void) u8 idx[MAX_HWIFS]; int i; + printk(KERN_INFO DRV_NAME ": please use \"probe_mask=0x3f\" module " + "parameter for probing all legacy ISA IDE ports\n"); + for (i = 0; i < MAX_HWIFS; i++) { ide_hwif_t *hwif; unsigned long io_addr = ide_default_io_base(i); @@ -96,7 +103,7 @@ static int __init ide_generic_init(void) idx[i] = 0xff; - if (io_addr) { + if ((probe_mask & (1 << i)) && io_addr) { if (!request_region(io_addr, 8, DRV_NAME)) { printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX " "not free.\n", -- cgit v1.2.3 From b92dea67cc66970cda6b5b11895d08e35b4618e7 Mon Sep 17 00:00:00 2001 From: Mark McLoughlin Date: Sun, 15 Jun 2008 23:20:50 +1000 Subject: virtio: Complete feature negotation before updating status lguest (in rusty's use-tun-ringfd patch) assumes that the guest has updated its feature bits before setting its status to VIRTIO_CONFIG_S_DRIVER_OK. That's pretty reasonable, so let's make it so. Signed-off-by: Mark McLoughlin Signed-off-by: Rusty Russell Signed-off-by: Linus Torvalds --- drivers/virtio/virtio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c index 0f3c2bb7bf3..7084e7e146c 100644 --- a/drivers/virtio/virtio.c +++ b/drivers/virtio/virtio.c @@ -124,9 +124,9 @@ static int virtio_dev_probe(struct device *_d) if (err) add_status(dev, VIRTIO_CONFIG_S_FAILED); else { - add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK); /* They should never have set feature bits beyond 32 */ dev->config->set_features(dev, dev->features[0]); + add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK); } return err; } -- cgit v1.2.3