From 7642d2113098f1270e9f9f0120f44d0035091636 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Thu, 28 Feb 2008 19:17:39 +0300 Subject: ACPI: SBS: remove typo from sbchc.c Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/sbshc.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/sbshc.c b/drivers/acpi/sbshc.c index a2cf3008ce6..bcf2c70fca8 100644 --- a/drivers/acpi/sbshc.c +++ b/drivers/acpi/sbshc.c @@ -130,7 +130,6 @@ static int acpi_smbus_transaction(struct acpi_smb_hc *hc, u8 protocol, goto end; } smb_hc_write(hc, ACPI_SMB_COMMAND, command); - smb_hc_write(hc, ACPI_SMB_COMMAND, command); if (!(protocol & 0x01)) { smb_hc_write(hc, ACPI_SMB_BLOCK_COUNT, length); for (i = 0; i < length; ++i) -- cgit v1.2.3 From 5c9fcb5deef4d3a49798d76c48b726d2e3c7df72 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Thu, 20 Mar 2008 16:40:32 +0800 Subject: ACPI: fix a regression of ACPI device driver autoloading commit 3620f2f2f39e7870cf1a4fb2e34063a142f28716 sets the cid of ACPI video/dock/bay device and leaves the hid empty. As a result, "modalias" should export the cid for devices which don't have a hid. ACPI Video driver is not autoloaded with commit 3620f2f2f39e7870cf1a4fb2e34063a142f28716 applied. "cat /sys/.../device:03(acpi video bus)/modalias" shows nothing. ACPI Video driver is autoloaded after revert that commit. "cat /sys/.../LNXVIDEO:0x/modalias" shows "acpi:LNXVIDEO:" ACPI Video driver is autoloaded with commit 3620f2f2f39e7870cf1a4fb2e34063a142f28716 and this patch applied. "cat /sys/.../device:03(acpi video bus)/modalias" shows "acpi:LNXVIDEO:" Signed-off-by: Zhang Rui Acked-by: Thomas Renninger Signed-off-by: Len Brown --- drivers/acpi/scan.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 57570ac4780..e6ce262b5d4 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -39,20 +39,26 @@ static int create_modalias(struct acpi_device *acpi_dev, char *modalias, int size) { int len; + int count; - if (!acpi_dev->flags.hardware_id) + if (!acpi_dev->flags.hardware_id && !acpi_dev->flags.compatible_ids) return -ENODEV; - len = snprintf(modalias, size, "acpi:%s:", - acpi_dev->pnp.hardware_id); - if (len < 0 || len >= size) - return -EINVAL; + len = snprintf(modalias, size, "acpi:"); size -= len; + if (acpi_dev->flags.hardware_id) { + count = snprintf(&modalias[len], size, "%s:", + acpi_dev->pnp.hardware_id); + if (count < 0 || count >= size) + return -EINVAL; + len += count; + size -= count; + } + if (acpi_dev->flags.compatible_ids) { struct acpi_compatible_id_list *cid_list; int i; - int count; cid_list = acpi_dev->pnp.cid_list; for (i = 0; i < cid_list->count; i++) { -- cgit v1.2.3 From 996520c1fdd2948addb629be56c9febf2967e02b Mon Sep 17 00:00:00 2001 From: Venki Pallipadi Date: Mon, 24 Mar 2008 14:24:10 -0700 Subject: ACPI: fix mis-merge -- invoke acpi_unlazy_tlb() only on C3 entry This original patch http://ussg.iu.edu/hypermail/linux/kernel/0712.2/1451.html was intending to add acpi_unlazy_tlb() to acpi_idle_enter_bm(), which is used for C3 entry. But it was merged incorrectly as commmit bde6f5f59c2b2b48a7a849c129d5b48838fe77ee 'x86: voluntary leave_mm before entering ACPI C3' so the call was instead added to acpi_idle_enter_simple() (which is C2 entry routine), probably due to identical context in that function. Move the call back to acpi_idle_enter_bm(). Signed-off-by: Venkatesh Pallipadi Signed-off-by: Len Brown --- drivers/acpi/processor_idle.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index e8e2d886923..1468f1e92ca 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -1487,7 +1487,6 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev, return 0; } - acpi_unlazy_tlb(smp_processor_id()); /* * Must be done before busmaster disable as we might need to * access HPET ! @@ -1577,6 +1576,8 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, return 0; } + acpi_unlazy_tlb(smp_processor_id()); + /* Tell the scheduler that we are going deep-idle: */ sched_clock_idle_sleep_event(); /* -- cgit v1.2.3 From 8b78cf602fd3bd97c0080edd22fe8fd5d0fa7832 Mon Sep 17 00:00:00 2001 From: Yi Yang Date: Mon, 25 Feb 2008 08:46:12 +0800 Subject: cpuidle: fix cpuidle time and usage overflow cpuidle C-state sysfs node time and usage are very easy to overflow because they are all of unsigned int type, time will overflow within about two hours, usage will take longer time to overflow, but they are increasing for ever. This patch will convert them to unsigned long long. Signed-off-by: Yi Yang Acked-by: Venkatesh Pallipadi Signed-off-by: Len Brown --- drivers/cpuidle/cpuidle.c | 2 +- drivers/cpuidle/sysfs.c | 10 ++++++++-- 2 files changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index d73663a5232..d42deb310ac 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -67,7 +67,7 @@ static void cpuidle_idle_call(void) /* enter the state and update stats */ dev->last_residency = target_state->enter(dev, target_state); dev->last_state = target_state; - target_state->time += dev->last_residency; + target_state->time += (unsigned long long)dev->last_residency; target_state->usage++; /* give the governor an opportunity to reflect on the outcome */ diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c index 69102ca0568..e949618b9be 100644 --- a/drivers/cpuidle/sysfs.c +++ b/drivers/cpuidle/sysfs.c @@ -218,6 +218,12 @@ static ssize_t show_state_##_name(struct cpuidle_state *state, char *buf) \ return sprintf(buf, "%u\n", state->_name);\ } +#define define_show_state_ull_function(_name) \ +static ssize_t show_state_##_name(struct cpuidle_state *state, char *buf) \ +{ \ + return sprintf(buf, "%llu\n", state->_name);\ +} + #define define_show_state_str_function(_name) \ static ssize_t show_state_##_name(struct cpuidle_state *state, char *buf) \ { \ @@ -228,8 +234,8 @@ static ssize_t show_state_##_name(struct cpuidle_state *state, char *buf) \ define_show_state_function(exit_latency) define_show_state_function(power_usage) -define_show_state_function(usage) -define_show_state_function(time) +define_show_state_ull_function(usage) +define_show_state_ull_function(time) define_show_state_str_function(name) define_show_state_str_function(desc) -- cgit v1.2.3 From 8e92b6605da989c0aa8ff7e33306f36f0efd957c Mon Sep 17 00:00:00 2001 From: Venki Pallipadi Date: Fri, 29 Feb 2008 10:24:32 -0800 Subject: cpuidle: fix 100% C0 statistics regression commit 9b12e18cdc1553de62d931e73443c806347cd974 'ACPI: cpuidle: Support C1 idle time accounting' was implicated in a 100% C0 idle regression. http://bugzilla.kernel.org/show_bug.cgi?id=10076 It pointed out a potential problem where the menu governor may get confused by the C-state residency time from poll idle or C1 idle, where this timing info is not accurate. This inaccuracy is due to interrupts being handled before we account for C-state exit. Do not mark TIME_VALID for CO poll state. Mark C1 time as valid only with the MWAIT (CSTATE_FFH) entry method. This makes governors use the timing information only when it is correct and eliminates any wrong policy decisions that may result from invalid timing information. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Len Brown --- drivers/acpi/processor_idle.c | 4 +++- drivers/cpuidle/cpuidle.c | 2 +- 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 1468f1e92ca..788da9781f8 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -1693,7 +1693,9 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr) switch (cx->type) { case ACPI_STATE_C1: state->flags |= CPUIDLE_FLAG_SHALLOW; - state->flags |= CPUIDLE_FLAG_TIME_VALID; + if (cx->entry_method == ACPI_CSTATE_FFH) + state->flags |= CPUIDLE_FLAG_TIME_VALID; + state->enter = acpi_idle_enter_c1; dev->safe_state = state; break; diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index d42deb310ac..fc555a90bb2 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -224,7 +224,7 @@ static void poll_idle_init(struct cpuidle_device *dev) state->exit_latency = 0; state->target_residency = 0; state->power_usage = -1; - state->flags = CPUIDLE_FLAG_POLL | CPUIDLE_FLAG_TIME_VALID; + state->flags = CPUIDLE_FLAG_POLL; state->enter = poll_idle; } #else -- cgit v1.2.3 From 33fd7afd66ffdc6addf1b085fe6403b6af532f8e Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 26 Mar 2008 13:29:32 -0400 Subject: pnpacpi: reduce printk severity for "pnpacpi: exceeded the max number of ..." We have been printing these messages at KERN_ERR since 2.6.24, per http://bugzilla.kernel.org/show_bug.cgi?id=9535 But KERN_ERR pops up on a console booted with "quiet" and causes users to get alarmed and file bugs about the message itself: https://bugzilla.redhat.com/show_bug.cgi?id=436589 So reduce the severity of these messages to KERN_WARNING, which is not printed by "quiet". This message will still be seen without "quiet", but a lot of messages are printed in that mode and it will be less likely to cause undue alarm. We could go all the way to KERN_DEBUG, but this is a real warning after all, so it seems prudent not to require "debug" to see it. Signed-off-by: Len Brown --- drivers/pnp/pnpacpi/rsparser.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c index 6aa231ef642..2dcd1960aca 100644 --- a/drivers/pnp/pnpacpi/rsparser.c +++ b/drivers/pnp/pnpacpi/rsparser.c @@ -85,7 +85,7 @@ static void pnpacpi_parse_allocated_irqresource(struct pnp_resource_table *res, i < PNP_MAX_IRQ) i++; if (i >= PNP_MAX_IRQ && !warned) { - printk(KERN_ERR "pnpacpi: exceeded the max number of IRQ " + printk(KERN_WARNING "pnpacpi: exceeded the max number of IRQ " "resources: %d \n", PNP_MAX_IRQ); warned = 1; return; @@ -187,7 +187,7 @@ static void pnpacpi_parse_allocated_dmaresource(struct pnp_resource_table *res, res->dma_resource[i].start = dma; res->dma_resource[i].end = dma; } else if (!warned) { - printk(KERN_ERR "pnpacpi: exceeded the max number of DMA " + printk(KERN_WARNING "pnpacpi: exceeded the max number of DMA " "resources: %d \n", PNP_MAX_DMA); warned = 1; } @@ -213,7 +213,7 @@ static void pnpacpi_parse_allocated_ioresource(struct pnp_resource_table *res, res->port_resource[i].start = io; res->port_resource[i].end = io + len - 1; } else if (!warned) { - printk(KERN_ERR "pnpacpi: exceeded the max number of IO " + printk(KERN_WARNING "pnpacpi: exceeded the max number of IO " "resources: %d \n", PNP_MAX_PORT); warned = 1; } @@ -241,7 +241,7 @@ static void pnpacpi_parse_allocated_memresource(struct pnp_resource_table *res, res->mem_resource[i].start = mem; res->mem_resource[i].end = mem + len - 1; } else if (!warned) { - printk(KERN_ERR "pnpacpi: exceeded the max number of mem " + printk(KERN_WARNING "pnpacpi: exceeded the max number of mem " "resources: %d\n", PNP_MAX_MEM); warned = 1; } -- cgit v1.2.3 From 1192aeb957402b45f311895f124e4ca41206843c Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Thu, 27 Mar 2008 01:48:22 -0400 Subject: ACPI: drivers/acpi: elide a non-zero test on a result that is never 0 The function thermal_cooling_device_register always returns either a valid pointer or a value made with ERR_PTR, so a test for non-zero on the result will always succeed. The problem was found using the following semantic match. (http://www.emn.fr/x-info/coccinelle/) // @a@ expression E, E1; statement S,S1; position p; @@ E = thermal_cooling_device_register(...) ... when != E = E1 if@p (E) S else S1 @n@ position a.p; expression E,E1; statement S,S1; @@ E = NULL ... when != E = E1 if@p (E) S else S1 @depends on !n@ expression E; statement S,S1; position a.p; @@ * if@p (E) S else S1 // Signed-off-by: Julia Lawall Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/fan.c | 34 ++++++++++++++++------------------ drivers/acpi/processor_core.c | 30 ++++++++++++++---------------- drivers/acpi/video.c | 28 +++++++++++++--------------- 3 files changed, 43 insertions(+), 49 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c index c8e3cba423e..4d535c50d82 100644 --- a/drivers/acpi/fan.c +++ b/drivers/acpi/fan.c @@ -260,24 +260,22 @@ static int acpi_fan_add(struct acpi_device *device) result = PTR_ERR(cdev); goto end; } - if (cdev) { - printk(KERN_INFO PREFIX - "%s is registered as cooling_device%d\n", - device->dev.bus_id, cdev->id); - - acpi_driver_data(device) = cdev; - result = sysfs_create_link(&device->dev.kobj, - &cdev->device.kobj, - "thermal_cooling"); - if (result) - return result; - - result = sysfs_create_link(&cdev->device.kobj, - &device->dev.kobj, - "device"); - if (result) - return result; - } + printk(KERN_INFO PREFIX + "%s is registered as cooling_device%d\n", + device->dev.bus_id, cdev->id); + + acpi_driver_data(device) = cdev; + result = sysfs_create_link(&device->dev.kobj, + &cdev->device.kobj, + "thermal_cooling"); + if (result) + return result; + + result = sysfs_create_link(&cdev->device.kobj, + &device->dev.kobj, + "device"); + if (result) + return result; result = acpi_fan_add_fs(device); if (result) diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 36a68fa114e..3a136f6c66a 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -674,22 +674,20 @@ static int __cpuinit acpi_processor_start(struct acpi_device *device) result = PTR_ERR(pr->cdev); goto end; } - if (pr->cdev) { - printk(KERN_INFO PREFIX - "%s is registered as cooling_device%d\n", - device->dev.bus_id, pr->cdev->id); - - result = sysfs_create_link(&device->dev.kobj, - &pr->cdev->device.kobj, - "thermal_cooling"); - if (result) - return result; - result = sysfs_create_link(&pr->cdev->device.kobj, - &device->dev.kobj, - "device"); - if (result) - return result; - } + printk(KERN_INFO PREFIX + "%s is registered as cooling_device%d\n", + device->dev.bus_id, pr->cdev->id); + + result = sysfs_create_link(&device->dev.kobj, + &pr->cdev->device.kobj, + "thermal_cooling"); + if (result) + return result; + result = sysfs_create_link(&pr->cdev->device.kobj, + &device->dev.kobj, + "device"); + if (result) + return result; if (pr->flags.throttling) { printk(KERN_INFO PREFIX "%s [%s] (supports", diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 12fb44f1676..fe09b57de61 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -734,21 +734,19 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) if (IS_ERR(device->cdev)) return; - if (device->cdev) { - printk(KERN_INFO PREFIX - "%s is registered as cooling_device%d\n", - device->dev->dev.bus_id, device->cdev->id); - result = sysfs_create_link(&device->dev->dev.kobj, - &device->cdev->device.kobj, - "thermal_cooling"); - if (result) - printk(KERN_ERR PREFIX "Create sysfs link\n"); - result = sysfs_create_link(&device->cdev->device.kobj, - &device->dev->dev.kobj, - "device"); - if (result) - printk(KERN_ERR PREFIX "Create sysfs link\n"); - } + printk(KERN_INFO PREFIX + "%s is registered as cooling_device%d\n", + device->dev->dev.bus_id, device->cdev->id); + result = sysfs_create_link(&device->dev->dev.kobj, + &device->cdev->device.kobj, + "thermal_cooling"); + if (result) + printk(KERN_ERR PREFIX "Create sysfs link\n"); + result = sysfs_create_link(&device->cdev->device.kobj, + &device->dev->dev.kobj, + "device"); + if (result) + printk(KERN_ERR PREFIX "Create sysfs link\n"); } if (device->cap._DCS && device->cap._DSS){ static int count = 0; -- cgit v1.2.3