From cdd4e09d692bd4f3457b3789279005e112b7696d Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Mon, 2 Nov 2009 14:31:11 +0000 Subject: tg3 / broadcom: Refine AC131 APD support Auto power-down (APD) support is a power-saving feature. It should be selectively enabled since it might expose MAC bugs. This patch changes the code to enable APD only if the PHY_BRCM_AUTO_PWRDWN_ENABLE flag is set. The tg3 driver was changed to set this bit. Signed-off-by: Matt Carlson Reviewed-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/phy/broadcom.c | 8 +++++--- drivers/net/tg3.c | 1 + 2 files changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index 5d2a2e90aba..bddf4a42ae6 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -561,9 +561,11 @@ static int brcm_fet_config_init(struct phy_device *phydev) if (err < 0) goto done; - /* Enable auto power down */ - err = brcm_phy_setbits(phydev, MII_BRCM_FET_SHDW_AUXSTAT2, - MII_BRCM_FET_SHDW_AS2_APDE); + if (phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE) { + /* Enable auto power down */ + err = brcm_phy_setbits(phydev, MII_BRCM_FET_SHDW_AUXSTAT2, + MII_BRCM_FET_SHDW_AS2_APDE); + } done: /* Disable shadow register access */ diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index e7128f6ae2d..592b5bf09e4 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -1114,6 +1114,7 @@ static int tg3_mdio_init(struct tg3 *tp) case TG3_PHY_ID_RTL8201E: case TG3_PHY_ID_BCMAC131: phydev->interface = PHY_INTERFACE_MODE_MII; + phydev->dev_flags |= PHY_BRCM_AUTO_PWRDWN_ENABLE; tp->tg3_flags3 |= TG3_FLG3_PHY_IS_FET; break; } -- cgit v1.2.3