From ebfaf1fbb6010204e973e329034d0004d6521503 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 9 Dec 2009 20:36:07 +0100 Subject: hwmon: (adt7475) Voltage attenuators can be bypassed It is possible to bypass the voltage attenuators on the +2.5V, Vccp, +5V and +12V voltage monitoring inputs. This is useful to connect other voltage channels than the ones the monitoring chip was originally designed for. When this feature is enabled, we must not include the scaling factors in our computations. Signed-off-by: Jean Delvare Cc: Hans de Goede Cc: Jordan Crouse Cc: "Darrick J. Wong" --- drivers/hwmon/adt7475.c | 42 ++++++++++++++++++++++++++++++++++++------ 1 file changed, 36 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c index 688b0a1af5a..eac24c1361b 100644 --- a/drivers/hwmon/adt7475.c +++ b/drivers/hwmon/adt7475.c @@ -80,6 +80,8 @@ #define REG_TEMP_OFFSET_BASE 0x70 +#define REG_CONFIG2 0x73 + #define REG_EXTEND1 0x76 #define REG_EXTEND2 0x77 @@ -92,11 +94,15 @@ #define REG_VTT_MIN 0x84 /* ADT7490 only */ #define REG_VTT_MAX 0x86 /* ADT7490 only */ +#define CONFIG2_ATTN 0x20 + #define CONFIG3_SMBALERT 0x01 #define CONFIG3_THERM 0x02 #define CONFIG4_PINFUNC 0x03 #define CONFIG4_MAXDUTY 0x08 +#define CONFIG4_ATTN_IN10 0x30 +#define CONFIG4_ATTN_IN43 0xC0 #define CONFIG5_TWOSCOMP 0x01 #define CONFIG5_TEMPOFFSET 0x02 @@ -157,6 +163,7 @@ struct adt7475_data { u8 config4; u8 config5; u8 has_voltage; + u8 bypass_attn; /* Bypass voltage attenuator */ u8 has_pwm2:1; u8 has_fan4:1; u32 alarms; @@ -233,19 +240,24 @@ static const int adt7473_in_scaling[ADT7475_VOLTAGE_COUNT + 1][2] = { { 45, 45 }, /* Vtt */ }; -static inline int reg2volt(int channel, u16 reg) +static inline int reg2volt(int channel, u16 reg, u8 bypass_attn) { const int *r = adt7473_in_scaling[channel]; + if (bypass_attn & (1 << channel)) + return DIV_ROUND_CLOSEST(reg * 2250, 1024); return DIV_ROUND_CLOSEST(reg * (r[0] + r[1]) * 2250, r[1] * 1024); } -static inline u16 volt2reg(int channel, long volt) +static inline u16 volt2reg(int channel, long volt, u8 bypass_attn) { const int *r = adt7473_in_scaling[channel]; long reg; - reg = (volt * r[1] * 1024) / ((r[0] + r[1]) * 2250); + if (bypass_attn & (1 << channel)) + reg = (volt * 1024) / 2250; + else + reg = (volt * r[1] * 1024) / ((r[0] + r[1]) * 2250); return SENSORS_LIMIT(reg, 0, 1023) & (0xff << 2); } @@ -305,7 +317,8 @@ static ssize_t show_voltage(struct device *dev, struct device_attribute *attr, (data->alarms >> sattr->index) & 1); default: val = data->voltage[sattr->nr][sattr->index]; - return sprintf(buf, "%d\n", reg2volt(sattr->index, val)); + return sprintf(buf, "%d\n", + reg2volt(sattr->index, val, data->bypass_attn)); } } @@ -324,7 +337,8 @@ static ssize_t set_voltage(struct device *dev, struct device_attribute *attr, mutex_lock(&data->lock); - data->voltage[sattr->nr][sattr->index] = volt2reg(sattr->index, val); + data->voltage[sattr->nr][sattr->index] = + volt2reg(sattr->index, val, data->bypass_attn); if (sattr->index < ADT7475_VOLTAGE_COUNT) { if (sattr->nr == MIN) @@ -1159,7 +1173,7 @@ static int adt7475_probe(struct i2c_client *client, struct adt7475_data *data; int i, ret = 0, revision; - u8 config3; + u8 config2, config3; data = kzalloc(sizeof(*data), GFP_KERNEL); if (data == NULL) @@ -1205,6 +1219,16 @@ static int adt7475_probe(struct i2c_client *client, data->has_voltage |= (1 << 0); /* in0 */ } + /* Voltage attenuators can be bypassed, globally or individually */ + config2 = adt7475_read(REG_CONFIG2); + if (config2 & CONFIG2_ATTN) { + data->bypass_attn = (0x3 << 3) | 0x3; + } else { + data->bypass_attn = ((data->config4 & CONFIG4_ATTN_IN10) >> 4) | + ((data->config4 & CONFIG4_ATTN_IN43) >> 3); + } + data->bypass_attn &= data->has_voltage; + /* Call adt7475_read_pwm for all pwm's as this will reprogram any pwm's which are disabled to manual mode with 0% duty cycle */ for (i = 0; i < ADT7475_PWM_COUNT; i++) @@ -1251,6 +1275,12 @@ static int adt7475_probe(struct i2c_client *client, (data->has_voltage & (1 << 0)) ? " in0" : "", data->has_fan4 ? " fan4" : "", data->has_pwm2 ? " pwm2" : ""); + if (data->bypass_attn) + dev_info(&client->dev, "Bypassing attenuators on:%s%s%s%s\n", + (data->bypass_attn & (1 << 0)) ? " in0" : "", + (data->bypass_attn & (1 << 1)) ? " in1" : "", + (data->bypass_attn & (1 << 3)) ? " in3" : "", + (data->bypass_attn & (1 << 4)) ? " in4" : ""); return 0; -- cgit v1.2.3