From ed3c661448a1b4b0b07c0a0d3c6e8a19c7d0ffd7 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Fri, 2 Oct 2009 16:12:39 +0100 Subject: iSCSI/iBFT: use proper address translation In virtual environments (namely, Xen Dom0) virt <-> phys and virt <-> isa-bus translations cannot be freely interchanged (and even outside such environments it is not really correct to do so). When looking at memory below 1M, the latter translations should always be used. iscsi_ibft_find.c part from: Martin Wilck . Signed-off-by: Jan Beulich Signed-off-by: Peter Jones Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: Linus Torvalds --- drivers/firmware/iscsi_ibft.c | 2 +- drivers/firmware/iscsi_ibft_find.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c index 420a96e7f2d..051d1ebbd28 100644 --- a/drivers/firmware/iscsi_ibft.c +++ b/drivers/firmware/iscsi_ibft.c @@ -939,7 +939,7 @@ static int __init ibft_init(void) if (ibft_addr) { printk(KERN_INFO "iBFT detected at 0x%llx.\n", - (u64)virt_to_phys((void *)ibft_addr)); + (u64)isa_virt_to_bus(ibft_addr)); rc = ibft_check_device(); if (rc) diff --git a/drivers/firmware/iscsi_ibft_find.c b/drivers/firmware/iscsi_ibft_find.c index d53fbbfefa3..dfb15c06c88 100644 --- a/drivers/firmware/iscsi_ibft_find.c +++ b/drivers/firmware/iscsi_ibft_find.c @@ -65,10 +65,10 @@ void __init reserve_ibft_region(void) * so skip that area */ if (pos == VGA_MEM) pos += VGA_SIZE; - virt = phys_to_virt(pos); + virt = isa_bus_to_virt(pos); if (memcmp(virt, IBFT_SIGN, IBFT_SIGN_LEN) == 0) { unsigned long *addr = - (unsigned long *)phys_to_virt(pos + 4); + (unsigned long *)isa_bus_to_virt(pos + 4); len = *addr; /* if the length of the table extends past 1M, * the table cannot be valid. */ -- cgit v1.2.3